Merge branch 'sa1100' into devel

11 files changed, 276 insertions, 223 deletions

diff --git a/Documentation/DocBook/tracepoint.tmpl b/Documentation/DocBook/tracepoint.tmpl
index b0756d0fd579..8bca1d5cec09 100644
--- a/Documentation/DocBook/tracepoint.tmpl
+++ b/Documentation/DocBook/tracepoint.tmpl
@@ -86,4 +86,9 @@
 !Iinclude/trace/events/irq.h
   </chapter>
 
+  <chapter id="signal">
+   <title>SIGNAL</title>
+!Iinclude/trace/events/signal.h
+  </chapter>
+
 </book>
diff --git a/Documentation/RCU/trace.txt b/Documentation/RCU/trace.txt
index 187bbf10c923..8608fd85e921 100644
--- a/Documentation/RCU/trace.txt
+++ b/Documentation/RCU/trace.txt
@@ -1,185 +1,10 @@
 CONFIG_RCU_TRACE debugfs Files and Formats
 
 
-The rcupreempt and rcutree implementations of RCU provide debugfs trace
-output that summarizes counters and state.  This information is useful for
-debugging RCU itself, and can sometimes also help to debug abuses of RCU.
-Note that the rcuclassic implementation of RCU does not provide debugfs
-trace output.
-
-The following sections describe the debugfs files and formats for
-preemptable RCU (rcupreempt) and hierarchical RCU (rcutree).
-
-
-Preemptable RCU debugfs Files and Formats
-
-This implementation of RCU provides three debugfs files under the
-top-level directory RCU: rcu/rcuctrs (which displays the per-CPU
-counters used by preemptable RCU) rcu/rcugp (which displays grace-period
-counters), and rcu/rcustats (which internal counters for debugging RCU).
-
-The output of "cat rcu/rcuctrs" looks as follows:
-
-CPU last cur F M
-  0    5  -5 0 0
-  1   -1   0 0 0
-  2    0   1 0 0
-  3    0   1 0 0
-  4    0   1 0 0
-  5    0   1 0 0
-  6    0   2 0 0
-  7    0  -1 0 0
-  8    0   1 0 0
-ggp = 26226, state = waitzero
-
-The per-CPU fields are as follows:
-
-o	"CPU" gives the CPU number.  Offline CPUs are not displayed.
-
-o	"last" gives the value of the counter that is being decremented
-	for the current grace period phase.  In the example above,
-	the counters sum to 4, indicating that there are still four
-	RCU read-side critical sections still running that started
-	before the last counter flip.
-
-o	"cur" gives the value of the counter that is currently being
-	both incremented (by rcu_read_lock()) and decremented (by
-	rcu_read_unlock()).  In the example above, the counters sum to
-	1, indicating that there is only one RCU read-side critical section
-	still running that started after the last counter flip.
-
-o	"F" indicates whether RCU is waiting for this CPU to acknowledge
-	a counter flip.  In the above example, RCU is not waiting on any,
-	which is consistent with the state being "waitzero" rather than
-	"waitack".
-
-o	"M" indicates whether RCU is waiting for this CPU to execute a
-	memory barrier.  In the above example, RCU is not waiting on any,
-	which is consistent with the state being "waitzero" rather than
-	"waitmb".
-
-o	"ggp" is the global grace-period counter.
-
-o	"state" is the RCU state, which can be one of the following:
-
-	o	"idle": there is no grace period in progress.
-
-	o	"waitack": RCU just incremented the global grace-period
-		counter, which has the effect of reversing the roles of
-		the "last" and "cur" counters above, and is waiting for
-		all the CPUs to acknowledge the flip.  Once the flip has
-		been acknowledged, CPUs will no longer be incrementing
-		what are now the "last" counters, so that their sum will
-		decrease monotonically down to zero.
-
-	o	"waitzero": RCU is waiting for the sum of the "last" counters
-		to decrease to zero.
-
-	o	"waitmb": RCU is waiting for each CPU to execute a memory
-		barrier, which ensures that instructions from a given CPU's
-		last RCU read-side critical section cannot be reordered
-		with instructions following the memory-barrier instruction.
-
-The output of "cat rcu/rcugp" looks as follows:
-
-oldggp=48870  newggp=48873
-
-Note that reading from this file provokes a synchronize_rcu().  The
-"oldggp" value is that of "ggp" from rcu/rcuctrs above, taken before
-executing the synchronize_rcu(), and the "newggp" value is also the
-"ggp" value, but taken after the synchronize_rcu() command returns.
-
-
-The output of "cat rcu/rcugp" looks as follows:
-
-na=1337955 nl=40 wa=1337915 wl=44 da=1337871 dl=0 dr=1337871 di=1337871
-1=50989 e1=6138 i1=49722 ie1=82 g1=49640 a1=315203 ae1=265563 a2=49640
-z1=1401244 ze1=1351605 z2=49639 m1=5661253 me1=5611614 m2=49639
-
-These are counters tracking internal preemptable-RCU events, however,
-some of them may be useful for debugging algorithms using RCU.  In
-particular, the "nl", "wl", and "dl" values track the number of RCU
-callbacks in various states.  The fields are as follows:
-
-o	"na" is the total number of RCU callbacks that have been enqueued
-	since boot.
-
-o	"nl" is the number of RCU callbacks waiting for the previous
-	grace period to end so that they can start waiting on the next
-	grace period.
-
-o	"wa" is the total number of RCU callbacks that have started waiting
-	for a grace period since boot.  "na" should be roughly equal to
-	"nl" plus "wa".
-
-o	"wl" is the number of RCU callbacks currently waiting for their
-	grace period to end.
-
-o	"da" is the total number of RCU callbacks whose grace periods
-	have completed since boot.  "wa" should be roughly equal to
-	"wl" plus "da".
-
-o	"dr" is the total number of RCU callbacks that have been removed
-	from the list of callbacks ready to invoke.  "dr" should be roughly
-	equal to "da".
-
-o	"di" is the total number of RCU callbacks that have been invoked
-	since boot.  "di" should be roughly equal to "da", though some
-	early versions of preemptable RCU had a bug so that only the
-	last CPU's count of invocations was displayed, rather than the
-	sum of all CPU's counts.
-
-o	"1" is the number of calls to rcu_try_flip().  This should be
-	roughly equal to the sum of "e1", "i1", "a1", "z1", and "m1"
-	described below.  In other words, the number of times that
-	the state machine is visited should be equal to the sum of the
-	number of times that each state is visited plus the number of
-	times that the state-machine lock acquisition failed.
-
-o	"e1" is the number of times that rcu_try_flip() was unable to
-	acquire the fliplock.
-
-o	"i1" is the number of calls to rcu_try_flip_idle().
-
-o	"ie1" is the number of times rcu_try_flip_idle() exited early
-	due to the calling CPU having no work for RCU.
-
-o	"g1" is the number of times that rcu_try_flip_idle() decided
-	to start a new grace period.  "i1" should be roughly equal to
-	"ie1" plus "g1".
-
-o	"a1" is the number of calls to rcu_try_flip_waitack().
-
-o	"ae1" is the number of times that rcu_try_flip_waitack() found
-	that at least one CPU had not yet acknowledge the new grace period
-	(AKA "counter flip").
-
-o	"a2" is the number of time rcu_try_flip_waitack() found that
-	all CPUs had acknowledged.  "a1" should be roughly equal to
-	"ae1" plus "a2".  (This particular output was collected on
-	a 128-CPU machine, hence the smaller-than-usual fraction of
-	calls to rcu_try_flip_waitack() finding all CPUs having already
-	acknowledged.)
-
-o	"z1" is the number of calls to rcu_try_flip_waitzero().
-
-o	"ze1" is the number of times that rcu_try_flip_waitzero() found
-	that not all of the old RCU read-side critical sections had
-	completed.
-
-o	"z2" is the number of times that rcu_try_flip_waitzero() finds
-	the sum of the counters equal to zero, in other words, that
-	all of the old RCU read-side critical sections had completed.
-	The value of "z1" should be roughly equal to "ze1" plus
-	"z2".
-
-o	"m1" is the number of calls to rcu_try_flip_waitmb().
-
-o	"me1" is the number of times that rcu_try_flip_waitmb() finds
-	that at least one CPU has not yet executed a memory barrier.
-
-o	"m2" is the number of times that rcu_try_flip_waitmb() finds that
-	all CPUs have executed a memory barrier.
+The rcutree implementation of RCU provides debugfs trace output that
+summarizes counters and state.  This information is useful for debugging
+RCU itself, and can sometimes also help to debug abuses of RCU.
+The following sections describe the debugfs files and formats.
 
 
 Hierarchical RCU debugfs Files and Formats
@@ -210,9 +35,10 @@ rcu_bh:
   6 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=859/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
   7 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=3761/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
 
-The first section lists the rcu_data structures for rcu, the second for
-rcu_bh.  Each section has one line per CPU, or eight for this 8-CPU system.
-The fields are as follows:
+The first section lists the rcu_data structures for rcu_sched, the second
+for rcu_bh.  Note that CONFIG_TREE_PREEMPT_RCU kernels will have an
+additional section for rcu_preempt.  Each section has one line per CPU,
+or eight for this 8-CPU system.  The fields are as follows:
 
 o	The number at the beginning of each line is the CPU number.
 	CPUs numbers followed by an exclamation mark are offline,
@@ -223,9 +49,9 @@ o	The number at the beginning of each line is the CPU number.
 
 o	"c" is the count of grace periods that this CPU believes have
 	completed.  CPUs in dynticks idle mode may lag quite a ways
-	behind, for example, CPU 4 under "rcu" above, which has slept
-	through the past 25 RCU grace periods.	It is not unusual to
-	see CPUs lagging by thousands of grace periods.
+	behind, for example, CPU 4 under "rcu_sched" above, which has
+	slept through the past 25 RCU grace periods.  It is not unusual
+	to see CPUs lagging by thousands of grace periods.
 
 o	"g" is the count of grace periods that this CPU believes have
 	started.  Again, CPUs in dynticks idle mode may lag behind.
@@ -308,8 +134,10 @@ The output of "cat rcu/rcugp" looks as follows:
 rcu_sched: completed=33062  gpnum=33063
 rcu_bh: completed=464  gpnum=464
 
-Again, this output is for both "rcu" and "rcu_bh".  The fields are
-taken from the rcu_state structure, and are as follows:
+Again, this output is for both "rcu_sched" and "rcu_bh".  Note that
+kernels built with CONFIG_TREE_PREEMPT_RCU will have an additional
+"rcu_preempt" line.  The fields are taken from the rcu_state structure,
+and are as follows:
 
 o	"completed" is the number of grace periods that have completed.
 	It is comparable to the "c" field from rcu/rcudata in that a
@@ -324,23 +152,24 @@ o	"gpnum" is the number of grace periods that have started.  It is
 	If these two fields are equal (as they are for "rcu_bh" above),
 	then there is no grace period in progress, in other words, RCU
 	is idle.  On the other hand, if the two fields differ (as they
-	do for "rcu" above), then an RCU grace period is in progress.
+	do for "rcu_sched" above), then an RCU grace period is in progress.
 
 
 The output of "cat rcu/rcuhier" looks as follows, with very long lines:
 
-c=6902 g=6903 s=2 jfq=3 j=72c7 nfqs=13142/nfqsng=0(13142) fqlh=6
-1/1 0:127 ^0    
-3/3 0:35 ^0    0/0 36:71 ^1    0/0 72:107 ^2    0/0 108:127 ^3    
-3/3f 0:5 ^0    2/3 6:11 ^1    0/0 12:17 ^2    0/0 18:23 ^3    0/0 24:29 ^4    0/0 30:35 ^5    0/0 36:41 ^0    0/0 42:47 ^1    0/0 48:53 ^2    0/0 54:59 ^3    0/0 60:65 ^4    0/0 66:71 ^5    0/0 72:77 ^0    0/0 78:83 ^1    0/0 84:89 ^2    0/0 90:95 ^3    0/0 96:101 ^4    0/0 102:107 ^5    0/0 108:113 ^0    0/0 114:119 ^1    0/0 120:125 ^2    0/0 126:127 ^3    
+c=6902 g=6903 s=2 jfq=3 j=72c7 nfqs=13142/nfqsng=0(13142) fqlh=6 oqlen=0
+1/1 .>. 0:127 ^0    
+3/3 .>. 0:35 ^0    0/0 .>. 36:71 ^1    0/0 .>. 72:107 ^2    0/0 .>. 108:127 ^3    
+3/3f .>. 0:5 ^0    2/3 .>. 6:11 ^1    0/0 .>. 12:17 ^2    0/0 .>. 18:23 ^3    0/0 .>. 24:29 ^4    0/0 .>. 30:35 ^5    0/0 .>. 36:41 ^0    0/0 .>. 42:47 ^1    0/0 .>. 48:53 ^2    0/0 .>. 54:59 ^3    0/0 .>. 60:65 ^4    0/0 .>. 66:71 ^5    0/0 .>. 72:77 ^0    0/0 .>. 78:83 ^1    0/0 .>. 84:89 ^2    0/0 .>. 90:95 ^3    0/0 .>. 96:101 ^4    0/0 .>. 102:107 ^5    0/0 .>. 108:113 ^0    0/0 .>. 114:119 ^1    0/0 .>. 120:125 ^2    0/0 .>. 126:127 ^3    
 rcu_bh:
-c=-226 g=-226 s=1 jfq=-5701 j=72c7 nfqs=88/nfqsng=0(88) fqlh=0
-0/1 0:127 ^0    
-0/3 0:35 ^0    0/0 36:71 ^1    0/0 72:107 ^2    0/0 108:127 ^3    
-0/3f 0:5 ^0    0/3 6:11 ^1    0/0 12:17 ^2    0/0 18:23 ^3    0/0 24:29 ^4    0/0 30:35 ^5    0/0 36:41 ^0    0/0 42:47 ^1    0/0 48:53 ^2    0/0 54:59 ^3    0/0 60:65 ^4    0/0 66:71 ^5    0/0 72:77 ^0    0/0 78:83 ^1    0/0 84:89 ^2    0/0 90:95 ^3    0/0 96:101 ^4    0/0 102:107 ^5    0/0 108:113 ^0    0/0 114:119 ^1    0/0 120:125 ^2    0/0 126:127 ^3
+c=-226 g=-226 s=1 jfq=-5701 j=72c7 nfqs=88/nfqsng=0(88) fqlh=0 oqlen=0
+0/1 .>. 0:127 ^0    
+0/3 .>. 0:35 ^0    0/0 .>. 36:71 ^1    0/0 .>. 72:107 ^2    0/0 .>. 108:127 ^3    
+0/3f .>. 0:5 ^0    0/3 .>. 6:11 ^1    0/0 .>. 12:17 ^2    0/0 .>. 18:23 ^3    0/0 .>. 24:29 ^4    0/0 .>. 30:35 ^5    0/0 .>. 36:41 ^0    0/0 .>. 42:47 ^1    0/0 .>. 48:53 ^2    0/0 .>. 54:59 ^3    0/0 .>. 60:65 ^4    0/0 .>. 66:71 ^5    0/0 .>. 72:77 ^0    0/0 .>. 78:83 ^1    0/0 .>. 84:89 ^2    0/0 .>. 90:95 ^3    0/0 .>. 96:101 ^4    0/0 .>. 102:107 ^5    0/0 .>. 108:113 ^0    0/0 .>. 114:119 ^1    0/0 .>. 120:125 ^2    0/0 .>. 126:127 ^3
 
-This is once again split into "rcu" and "rcu_bh" portions.  The fields are
-as follows:
+This is once again split into "rcu_sched" and "rcu_bh" portions,
+and CONFIG_TREE_PREEMPT_RCU kernels will again have an additional
+"rcu_preempt" section.  The fields are as follows:
 
 o	"c" is exactly the same as "completed" under rcu/rcugp.
 
@@ -372,6 +201,11 @@ o	"fqlh" is the number of calls to force_quiescent_state() that
 	exited immediately (without even being counted in nfqs above)
 	due to contention on ->fqslock.
 
+o	"oqlen" is the number of callbacks on the "orphan" callback
+	list.  RCU callbacks are placed on this list by CPUs going
+	offline, and are "adopted" either by the CPU helping the outgoing
+	CPU or by the next rcu_barrier*() call, whichever comes first.
+
 o	Each element of the form "1/1 0:127 ^0" represents one struct
 	rcu_node.  Each line represents one level of the hierarchy, from
 	root to leaves.  It is best to think of the rcu_data structures
@@ -379,7 +213,7 @@ o	Each element of the form "1/1 0:127 ^0" represents one struct
 	might be either one, two, or three levels of rcu_node structures,
 	depending on the relationship between CONFIG_RCU_FANOUT and
 	CONFIG_NR_CPUS.
-	
+
 	o	The numbers separated by the "/" are the qsmask followed
 		by the qsmaskinit.  The qsmask will have one bit
 		set for each entity in the next lower level that
@@ -389,10 +223,19 @@ o	Each element of the form "1/1 0:127 ^0" represents one struct
 		The value of qsmaskinit is assigned to that of qsmask
 		at the beginning of each grace period.
 
-		For example, for "rcu", the qsmask of the first entry
-		of the lowest level is 0x14, meaning that we are still
-		waiting for CPUs 2 and 4 to check in for the current
-		grace period.
+		For example, for "rcu_sched", the qsmask of the first
+		entry of the lowest level is 0x14, meaning that we
+		are still waiting for CPUs 2 and 4 to check in for the
+		current grace period.
+
+	o	The characters separated by the ">" indicate the state
+		of the blocked-tasks lists.  A "T" preceding the ">"
+		indicates that at least one task blocked in an RCU
+		read-side critical section blocks the current grace
+		period, while a "." preceding the ">" indicates otherwise.
+		The character following the ">" indicates similarly for
+		the next grace period.  A "T" should appear in this
+		field only for rcu-preempt.
 
 	o	The numbers separated by the ":" are the range of CPUs
 		served by this struct rcu_node.  This can be helpful
@@ -431,8 +274,9 @@ rcu_bh:
   6 np=120834 qsp=9902 cbr=0 cng=0 gpc=6 gps=3 nf=2 nn=110921
   7 np=144888 qsp=26336 cbr=0 cng=0 gpc=8 gps=2 nf=0 nn=118542
 
-As always, this is once again split into "rcu" and "rcu_bh" portions.
-The fields are as follows:
+As always, this is once again split into "rcu_sched" and "rcu_bh"
+portions, with CONFIG_TREE_PREEMPT_RCU kernels having an additional
+"rcu_preempt" section.  The fields are as follows:
 
 o	"np" is the number of times that __rcu_pending() has been invoked
 	for the corresponding flavor of RCU.
diff --git a/Documentation/RCU/whatisRCU.txt b/Documentation/RCU/whatisRCU.txt
index e41a7fecf0d3..d542ca243b80 100644
--- a/Documentation/RCU/whatisRCU.txt
+++ b/Documentation/RCU/whatisRCU.txt
@@ -830,7 +830,7 @@ sched:	Critical sections	Grace period		Barrier
 SRCU:	Critical sections	Grace period		Barrier
 
 	srcu_read_lock		synchronize_srcu	N/A
-	srcu_read_unlock
+	srcu_read_unlock	synchronize_srcu_expedited
 
 SRCU:	Initialization/cleanup
 	init_srcu_struct
diff --git a/Documentation/dontdiff b/Documentation/dontdiff
index e1efc400bed6..e151b2a36267 100644
--- a/Documentation/dontdiff
+++ b/Documentation/dontdiff
@@ -65,6 +65,7 @@ aicdb.h*
 asm-offsets.h
 asm_offsets.h
 autoconf.h*
+av_permissions.h
 bbootsect
 bin2c
 binkernel.spec
@@ -95,12 +96,14 @@ docproc
 elf2ecoff
 elfconfig.h*
 fixdep
+flask.h
 fore200e_mkfirm
 fore200e_pca_fw.c*
 gconf
 gen-devlist
 gen_crc32table
 gen_init_cpio
+genheaders
 genksyms
 *_gray256.c
 ihex2fw
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index bc693fffabe0..f613df8ec7bf 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -6,6 +6,21 @@ be removed from this file.
 
 ---------------------------
 
+What:	USER_SCHED
+When:	2.6.34
+
+Why:	USER_SCHED was implemented as a proof of concept for group scheduling.
+	The effect of USER_SCHED can already be achieved from userspace with
+	the help of libcgroup. The removal of USER_SCHED will also simplify
+	the scheduler code with the removal of one major ifdef. There are also
+	issues USER_SCHED has with USER_NS. A decision was taken not to fix
+	those and instead remove USER_SCHED. Also new group scheduling
+	features will not be implemented for USER_SCHED.
+
+Who:	Dhaval Giani <dhaval@linux.vnet.ibm.com>
+
+---------------------------
+
 What:	PRISM54
 When:	2.6.34
 
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index 2c48f945546b..4af0018533f2 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -1072,7 +1072,8 @@ second).  The meanings of the columns are as follows, from left to right:
 - irq: servicing interrupts
 - softirq: servicing softirqs
 - steal: involuntary wait
-- guest: running a guest
+- guest: running a normal guest
+- guest_nice: running a niced guest
 
 The "intr" line gives counts of interrupts  serviced since boot time, for each
 of the  possible system interrupts.   The first  column  is the  total of  all
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 9107b387e91f..fce5b5e516cc 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -85,7 +85,6 @@ parameter is applicable:
 	PPT	Parallel port support is enabled.
 	PS2	Appropriate PS/2 support is enabled.
 	RAM	RAM disk support is enabled.
-	ROOTPLUG The example Root Plug LSM is enabled.
 	S390	S390 architecture is enabled.
 	SCSI	Appropriate SCSI support is enabled.
 			A lot of drivers has their options described inside of
@@ -345,6 +344,15 @@ and is between 256 and 4096 characters. It is defined in the file
 			Change the amount of debugging information output
 			when initialising the APIC and IO-APIC components.
 
+	show_lapic=	[APIC,X86] Advanced Programmable Interrupt Controller
+			Limit apic dumping. The parameter defines the maximal
+			number of local apics being dumped. Also it is possible
+			to set it to "all" by meaning -- no limit here.
+			Format: { 1 (default) | 2 | ... | all }.
+			The parameter valid if only apic=debug or
+			apic=verbose is specified.
+			Example: apic=debug show_lapic=all
+
 	apm=		[APM] Advanced Power Management
 			See header of arch/x86/kernel/apm_32.c.
 
@@ -779,6 +787,13 @@ and is between 256 and 4096 characters. It is defined in the file
 			by the set_ftrace_notrace file in the debugfs
 			tracing directory.
 
+	ftrace_graph_filter=[function-list]
+			[FTRACE] Limit the top level callers functions traced
+			by the function graph tracer at boot up.
+			function-list is a comma separated list of functions
+			that can be changed at run time by the
+			set_graph_function file in the debugfs tracing directory.
+
 	gamecon.map[2|3]=
 			[HW,JOY] Multisystem joystick and NES/SNES/PSX pad
 			support via parallel port (up to 5 devices per port)
@@ -2032,8 +2047,15 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	print-fatal-signals=
 			[KNL] debug: print fatal signals
-			print-fatal-signals=1: print segfault info to
-			the kernel console.
+
+			If enabled, warn about various signal handling
+			related application anomalies: too many signals,
+			too many POSIX.1 timers, fatal signals causing a
+			coredump - etc.
+
+			If you hit the warning due to signal overflow,
+			you might want to try "ulimit -i unlimited".
+
 			default: off.
 
 	printk.time=	Show timing data prefixed to each printk message line
@@ -2164,15 +2186,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			Useful for devices that are detected asynchronously
 			(e.g. USB and MMC devices).
 
-	root_plug.vendor_id=
-			[ROOTPLUG] Override the default vendor ID
-
-	root_plug.product_id=
-			[ROOTPLUG] Override the default product ID
-
-	root_plug.debug=
-			[ROOTPLUG] Enable debugging output
-
 	rw		[KNL] Mount root device read-write on boot
 
 	S		[KNL] Run init in single mode
@@ -2182,6 +2195,8 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	sbni=		[NET] Granch SBNI12 leased line adapter
 
+	sched_debug	[KNL] Enables verbose scheduler debug messages.
+
 	sc1200wdt=	[HW,WDT] SC1200 WDT (watchdog) driver
 			Format: <io>[,<timeout>[,<isapnp>]]
 
diff --git a/Documentation/pcmcia/driver-changes.txt b/Documentation/pcmcia/driver-changes.txt
index 059934363caf..446f43b309df 100644
--- a/Documentation/pcmcia/driver-changes.txt
+++ b/Documentation/pcmcia/driver-changes.txt
@@ -1,5 +1,17 @@
 This file details changes in 2.6 which affect PCMCIA card driver authors:
 
+* no cs_error / CS_CHECK / CONFIG_PCMCIA_DEBUG (as of 2.6.33)
+   Instead of the cs_error() callback or the CS_CHECK() macro, please use
+   Linux-style checking of return values, and -- if necessary -- debug
+   messages using "dev_dbg()" or "pr_debug()".
+
+* New CIS tuple access (as of 2.6.33)
+   Instead of pcmcia_get_{first,next}_tuple(), pcmcia_get_tuple_data() and
+   pcmcia_parse_tuple(), a driver shall use "pcmcia_get_tuple()" if it is
+   only interested in one (raw) tuple, or "pcmcia_loop_tuple()" if it is
+   interested in all tuples of one type. To decode the MAC from CISTPL_FUNCE,
+   a new helper "pcmcia_get_mac_from_cis()" was added.
+
 * New configuration loop helper (as of 2.6.28)
    By calling pcmcia_loop_config(), a driver can iterate over all available
    configuration options. During a driver's probe() phase, one doesn't need
diff --git a/Documentation/slow-work.txt b/Documentation/slow-work.txt
index 52bc31433723..9dbf4470c7e1 100644
--- a/Documentation/slow-work.txt
+++ b/Documentation/slow-work.txt
@@ -279,9 +279,9 @@ The slow-work thread pool has a number of configurables:
 VIEWING EXECUTING AND QUEUED ITEMS
 ==================================
 
-If CONFIG_SLOW_WORK_PROC is enabled, a proc file is made available:
+If CONFIG_SLOW_WORK_DEBUG is enabled, a debugfs file is made available:
 
-	/proc/slow_work_rq
+	/sys/kernel/debug/slow_work/runqueue
 
 through which the list of work items being executed and the queues of items to
 be executed may be viewed.  The owner of a work item is given the chance to
diff --git a/Documentation/trace/ftrace-design.txt b/Documentation/trace/ftrace-design.txt
index 7003e10f10f5..641a1ef2a7ff 100644
--- a/Documentation/trace/ftrace-design.txt
+++ b/Documentation/trace/ftrace-design.txt
@@ -213,10 +213,19 @@ If you can't trace NMI functions, then skip this option.
 <details to be filled>
 
 
-HAVE_FTRACE_SYSCALLS
+HAVE_SYSCALL_TRACEPOINTS
 ---------------------
 
-<details to be filled>
+You need very few things to get the syscalls tracing in an arch.
+
+- Have a NR_syscalls variable in <asm/unistd.h> that provides the number
+  of syscalls supported by the arch.
+- Implement arch_syscall_addr() that resolves a syscall address from a
+  syscall number.
+- Support the TIF_SYSCALL_TRACEPOINT thread flags
+- Put the trace_sys_enter() and trace_sys_exit() tracepoints calls from ptrace
+  in the ptrace syscalls tracing path.
+- Tag this arch as HAVE_SYSCALL_TRACEPOINTS.
 
 
 HAVE_FTRACE_MCOUNT_RECORD
diff --git a/Documentation/trace/kprobetrace.txt b/Documentation/trace/kprobetrace.txt
new file mode 100644
index 000000000000..47aabeebbdf6
--- /dev/null
+++ b/Documentation/trace/kprobetrace.txt
@@ -0,0 +1,149 @@
+                        Kprobe-based Event Tracing
+                        ==========================
+
+                 Documentation is written by Masami Hiramatsu
+
+
+Overview
+--------
+These events are similar to tracepoint based events. Instead of Tracepoint,
+this is based on kprobes (kprobe and kretprobe). So it can probe wherever
+kprobes can probe (this means, all functions body except for __kprobes
+functions). Unlike the Tracepoint based event, this can be added and removed
+dynamically, on the fly.
+
+To enable this feature, build your kernel with CONFIG_KPROBE_TRACING=y.
+
+Similar to the events tracer, this doesn't need to be activated via
+current_tracer. Instead of that, add probe points via
+/sys/kernel/debug/tracing/kprobe_events, and enable it via
+/sys/kernel/debug/tracing/events/kprobes/<EVENT>/enabled.
+
+
+Synopsis of kprobe_events
+-------------------------
+  p[:[GRP/]EVENT] SYMBOL[+offs]|MEMADDR [FETCHARGS]	: Set a probe
+  r[:[GRP/]EVENT] SYMBOL[+0] [FETCHARGS]		: Set a return probe
+
+ GRP		: Group name. If omitted, use "kprobes" for it.
+ EVENT		: Event name. If omitted, the event name is generated
+		  based on SYMBOL+offs or MEMADDR.
+ SYMBOL[+offs]	: Symbol+offset where the probe is inserted.
+ MEMADDR	: Address where the probe is inserted.
+
+ FETCHARGS	: Arguments. Each probe can have up to 128 args.
+  %REG		: Fetch register REG
+  @ADDR		: Fetch memory at ADDR (ADDR should be in kernel)
+  @SYM[+|-offs]	: Fetch memory at SYM +|- offs (SYM should be a data symbol)
+  $stackN	: Fetch Nth entry of stack (N >= 0)
+  $stack	: Fetch stack address.
+  $argN		: Fetch function argument. (N >= 0)(*)
+  $retval	: Fetch return value.(**)
+  +|-offs(FETCHARG) : Fetch memory at FETCHARG +|- offs address.(***)
+  NAME=FETCHARG: Set NAME as the argument name of FETCHARG.
+
+  (*) aN may not correct on asmlinkaged functions and at the middle of
+      function body.
+  (**) only for return probe.
+  (***) this is useful for fetching a field of data structures.
+
+
+Per-Probe Event Filtering
+-------------------------
+ Per-probe event filtering feature allows you to set different filter on each
+probe and gives you what arguments will be shown in trace buffer. If an event
+name is specified right after 'p:' or 'r:' in kprobe_events, it adds an event
+under tracing/events/kprobes/<EVENT>, at the directory you can see 'id',
+'enabled', 'format' and 'filter'.
+
+enabled:
+  You can enable/disable the probe by writing 1 or 0 on it.
+
+format:
+  This shows the format of this probe event.
+
+filter:
+  You can write filtering rules of this event.
+
+id:
+  This shows the id of this probe event.
+
+
+Event Profiling
+---------------
+ You can check the total number of probe hits and probe miss-hits via
+/sys/kernel/debug/tracing/kprobe_profile.
+ The first column is event name, the second is the number of probe hits,
+the third is the number of probe miss-hits.
+
+
+Usage examples
+--------------
+To add a probe as a new event, write a new definition to kprobe_events
+as below.
+
+  echo p:myprobe do_sys_open dfd=$arg0 filename=$arg1 flags=$arg2 mode=$arg3 > /sys/kernel/debug/tracing/kprobe_events
+
+ This sets a kprobe on the top of do_sys_open() function with recording
+1st to 4th arguments as "myprobe" event. As this example shows, users can
+choose more familiar names for each arguments.
+
+  echo r:myretprobe do_sys_open $retval >> /sys/kernel/debug/tracing/kprobe_events
+
+ This sets a kretprobe on the return point of do_sys_open() function with
+recording return value as "myretprobe" event.
+ You can see the format of these events via
+/sys/kernel/debug/tracing/events/kprobes/<EVENT>/format.
+
+  cat /sys/kernel/debug/tracing/events/kprobes/myprobe/format
+name: myprobe
+ID: 75
+format:
+	field:unsigned short common_type;	offset:0;	size:2;
+	field:unsigned char common_flags;	offset:2;	size:1;
+	field:unsigned char common_preempt_count;	offset:3;	size:1;
+	field:int common_pid;	offset:4;	size:4;
+	field:int common_tgid;	offset:8;	size:4;
+
+	field: unsigned long ip;	offset:16;tsize:8;
+	field: int nargs;	offset:24;tsize:4;
+	field: unsigned long dfd;	offset:32;tsize:8;
+	field: unsigned long filename;	offset:40;tsize:8;
+	field: unsigned long flags;	offset:48;tsize:8;
+	field: unsigned long mode;	offset:56;tsize:8;
+
+print fmt: "(%lx) dfd=%lx filename=%lx flags=%lx mode=%lx", REC->ip, REC->dfd, REC->filename, REC->flags, REC->mode
+
+
+ You can see that the event has 4 arguments as in the expressions you specified.
+
+  echo > /sys/kernel/debug/tracing/kprobe_events
+
+ This clears all probe points.
+
+ Right after definition, each event is disabled by default. For tracing these
+events, you need to enable it.
+
+  echo 1 > /sys/kernel/debug/tracing/events/kprobes/myprobe/enable
+  echo 1 > /sys/kernel/debug/tracing/events/kprobes/myretprobe/enable
+
+ And you can see the traced information via /sys/kernel/debug/tracing/trace.
+
+  cat /sys/kernel/debug/tracing/trace
+# tracer: nop
+#
+#           TASK-PID    CPU#    TIMESTAMP  FUNCTION
+#              | |       |          |         |
+           <...>-1447  [001] 1038282.286875: myprobe: (do_sys_open+0x0/0xd6) dfd=3 filename=7fffd1ec4440 flags=8000 mode=0
+           <...>-1447  [001] 1038282.286878: myretprobe: (sys_openat+0xc/0xe <- do_sys_open) $retval=fffffffffffffffe
+           <...>-1447  [001] 1038282.286885: myprobe: (do_sys_open+0x0/0xd6) dfd=ffffff9c filename=40413c flags=8000 mode=1b6
+           <...>-1447  [001] 1038282.286915: myretprobe: (sys_open+0x1b/0x1d <- do_sys_open) $retval=3
+           <...>-1447  [001] 1038282.286969: myprobe: (do_sys_open+0x0/0xd6) dfd=ffffff9c filename=4041c6 flags=98800 mode=10
+           <...>-1447  [001] 1038282.286976: myretprobe: (sys_open+0x1b/0x1d <- do_sys_open) $retval=3
+
+
+ Each line shows when the kernel hits an event, and <- SYMBOL means kernel
+returns from SYMBOL(e.g. "sys_open+0x1b/0x1d <- do_sys_open" means kernel
+returns from do_sys_open to sys_open+0x1b).
+
+