diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2023-01-20 11:00:03 -0800 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2023-01-20 11:00:03 -0800 |
commit | 1ed46384f85bcf05fc9b6605f9fd54e1f81a331d (patch) | |
tree | 4dc25d90d271d1dfc91332af7a751ef9ac9fd468 /arch/arm | |
parent | ff83fec8179e392be2f472f0a9ec3da8f6d529c6 (diff) | |
parent | d2c865553adb7ad9abf3894cbb209cf1bc95484a (diff) | |
download | linux-stable-1ed46384f85bcf05fc9b6605f9fd54e1f81a331d.tar.gz linux-stable-1ed46384f85bcf05fc9b6605f9fd54e1f81a331d.tar.bz2 linux-stable-1ed46384f85bcf05fc9b6605f9fd54e1f81a331d.zip |
Merge tag 'soc-fixes-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC DT and driver fixes from Arnd Bergmann:
"Lots of dts fixes for Qualcomm Snapdragon and NXP i.MX platforms,
including:
- A regression fix for SDHCI controllers on Inforce 6540, and another
SDHCI fix on SM8350
- Reenable cluster idle on sm8250 after the the code fix is upstream
- multiple fixes for the QMP PHY binding, needing an incompatible dt
change
- The reserved memory map is updated on Xiaomi Mi 4C and Huawei Nexus
6P, to avoid instabilities caused by use of protected memory
regions
- Fix i.MX8MP DT for missing GPC Interrupt, power-domain typo and USB
clock error
- A couple of verdin-imx8mm DT fixes for audio playback support
- Fix pca9547 i2c-mux node name for i.MX and Vybrid device trees
- Fix an imx93-11x11-evk uSDHC pad setting problem that causes Micron
eMMC CMD8 CRC error in HS400ES/HS400 mode
The remaining ARM and RISC-V platforms only have very few smaller dts
bugfixes this time:
- A fix for the SiFive unmatched board's PCI memory space
- A revert to fix a regression with GPIO on Marvell Armada
- A fix for the UART address on Marvell AC5
- Missing chip-select phandles for stm32 boards
- Selecting the correct clock for the sam9x60 memory controller
- Amlogic based Odroid-HC4 needs a revert to restore USB
functionality.
And finally, there are some minor code fixes:
- Build fixes for OMAP1, pxa, riscpc, raspberry pi firmware, and zynq
firmware
- memory controller driver fixes for an OMAP regression and older
bugs on tegra, atmel and mvebu
- reset controller fixes for ti-sci and uniphier platforms
- ARM SCMI firmware fixes for a couple of rare corner cases
- Qualcomm platform driver fixes for incorrect error handling and a
backwards compatibility fix for the apr driver using older dtb
- NXP i.MX SoC driver fixes for HDMI output, error handling in the
imx8 soc-id and missing reference counting on older cpuid code"
* tag 'soc-fixes-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (60 commits)
firmware: zynqmp: fix declarations for gcc-13
ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp151a-prtt1l
ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp157c-emstamp-argon
ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp15xx-dhcom-som
ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp15xx-dhcor-som
ARM: dts: at91: sam9x60: fix the ddr clock for sam9x60
ARM: omap1: fix building gpio15xx
ARM: omap1: fix !ARCH_OMAP1_ANY link failures
firmware: raspberrypi: Fix type assignment
arm64: dts: qcom: msm8992-libra: Fix the memory map
arm64: dts: qcom: msm8992: Don't use sfpb mutex
PM: AVS: qcom-cpr: Fix an error handling path in cpr_probe()
arm64: dts: msm8994-angler: fix the memory map
arm64: dts: marvell: AC5/AC5X: Fix address for UART1
ARM: footbridge: drop unnecessary inclusion
Revert "ARM: dts: armada-39x: Fix compatible string for gpios"
Revert "ARM: dts: armada-38x: Fix compatible string for gpios"
ARM: pxa: enable PXA310/PXA320 for DT-only build
riscv: dts: sifive: fu740: fix size of pcie 32bit memory
soc: qcom: apr: Make qcom,protection-domain optional again
...
Diffstat (limited to 'arch/arm')
29 files changed, 73 insertions, 88 deletions
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index 12933eff419f..446861b6b17b 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -304,7 +304,7 @@ }; gpio0: gpio@18100 { - compatible = "marvell,armadaxp-gpio", + compatible = "marvell,armada-370-gpio", "marvell,orion-gpio"; reg = <0x18100 0x40>, <0x181c0 0x08>; reg-names = "gpio", "pwm"; @@ -323,7 +323,7 @@ }; gpio1: gpio@18140 { - compatible = "marvell,armadaxp-gpio", + compatible = "marvell,armada-370-gpio", "marvell,orion-gpio"; reg = <0x18140 0x40>, <0x181c8 0x08>; reg-names = "gpio", "pwm"; diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/armada-39x.dtsi index 1e05208d9f34..9d1cac49c022 100644 --- a/arch/arm/boot/dts/armada-39x.dtsi +++ b/arch/arm/boot/dts/armada-39x.dtsi @@ -213,7 +213,7 @@ }; gpio0: gpio@18100 { - compatible = "marvell,armadaxp-gpio", "marvell,orion-gpio"; + compatible = "marvell,orion-gpio"; reg = <0x18100 0x40>; ngpios = <32>; gpio-controller; @@ -227,7 +227,7 @@ }; gpio1: gpio@18140 { - compatible = "marvell,armadaxp-gpio", "marvell,orion-gpio"; + compatible = "marvell,orion-gpio"; reg = <0x18140 0x40>; ngpios = <28>; gpio-controller; diff --git a/arch/arm/boot/dts/imx53-ppd.dts b/arch/arm/boot/dts/imx53-ppd.dts index 37d0cffea99c..70c4a4852256 100644 --- a/arch/arm/boot/dts/imx53-ppd.dts +++ b/arch/arm/boot/dts/imx53-ppd.dts @@ -488,7 +488,7 @@ scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; status = "okay"; - i2c-switch@70 { + i2c-mux@70 { compatible = "nxp,pca9547"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi index 4bc4371e6bae..4b81a975c979 100644 --- a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi @@ -632,7 +632,6 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; - uart-has-rtscts; rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6ul-pico-dwarf.dts b/arch/arm/boot/dts/imx6ul-pico-dwarf.dts index 162dc259edc8..5a74c7f68eb6 100644 --- a/arch/arm/boot/dts/imx6ul-pico-dwarf.dts +++ b/arch/arm/boot/dts/imx6ul-pico-dwarf.dts @@ -32,7 +32,7 @@ }; &i2c2 { - clock_frequency = <100000>; + clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; diff --git a/arch/arm/boot/dts/imx7d-pico-dwarf.dts b/arch/arm/boot/dts/imx7d-pico-dwarf.dts index 5162fe227d1e..fdc10563f147 100644 --- a/arch/arm/boot/dts/imx7d-pico-dwarf.dts +++ b/arch/arm/boot/dts/imx7d-pico-dwarf.dts @@ -32,7 +32,7 @@ }; &i2c1 { - clock_frequency = <100000>; + clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; @@ -52,7 +52,7 @@ }; &i2c4 { - clock_frequency = <100000>; + clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; diff --git a/arch/arm/boot/dts/imx7d-pico-nymph.dts b/arch/arm/boot/dts/imx7d-pico-nymph.dts index 104a85254adb..5afb1674e012 100644 --- a/arch/arm/boot/dts/imx7d-pico-nymph.dts +++ b/arch/arm/boot/dts/imx7d-pico-nymph.dts @@ -43,7 +43,7 @@ }; &i2c1 { - clock_frequency = <100000>; + clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; @@ -64,7 +64,7 @@ }; &i2c2 { - clock_frequency = <100000>; + clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; diff --git a/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts b/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts index 44cd72f1b1be..116e59a3b76d 100644 --- a/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts +++ b/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts @@ -19,16 +19,16 @@ serial@f995e000 { status = "okay"; }; + }; +}; - sdhci@f9824900 { - bus-width = <8>; - non-removable; - status = "okay"; - }; +&sdhc_1 { + bus-width = <8>; + non-removable; + status = "okay"; +}; - sdhci@f98a4900 { - cd-gpios = <&tlmm 122 GPIO_ACTIVE_LOW>; - bus-width = <4>; - }; - }; +&sdhc_2 { + cd-gpios = <&tlmm 122 GPIO_ACTIVE_LOW>; + bus-width = <4>; }; diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi index fe30abfff90a..4b0d2b4f4b6a 100644 --- a/arch/arm/boot/dts/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi @@ -421,7 +421,7 @@ status = "disabled"; }; - mmc@f9824900 { + sdhc_1: mmc@f9824900 { compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; reg-names = "hc", "core"; @@ -434,7 +434,7 @@ status = "disabled"; }; - mmc@f98a4900 { + sdhc_2: mmc@f98a4900 { compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; reg-names = "hc", "core"; diff --git a/arch/arm/boot/dts/sam9x60.dtsi b/arch/arm/boot/dts/sam9x60.dtsi index 8f5477e307dd..37a5d96aaf64 100644 --- a/arch/arm/boot/dts/sam9x60.dtsi +++ b/arch/arm/boot/dts/sam9x60.dtsi @@ -564,7 +564,7 @@ mpddrc: mpddrc@ffffe800 { compatible = "microchip,sam9x60-ddramc", "atmel,sama5d3-ddramc"; reg = <0xffffe800 0x200>; - clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_CORE PMC_MCK>; + clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_PERIPHERAL 49>; clock-names = "ddrck", "mpddr"; }; diff --git a/arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi b/arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi index d865ab5d866b..dd23de85100c 100644 --- a/arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi +++ b/arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi @@ -101,8 +101,12 @@ &qspi { pinctrl-names = "default", "sleep"; - pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>; - pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>; + pinctrl-0 = <&qspi_clk_pins_a + &qspi_bk1_pins_a + &qspi_cs1_pins_a>; + pinctrl-1 = <&qspi_clk_sleep_pins_a + &qspi_bk1_sleep_pins_a + &qspi_cs1_sleep_pins_a>; reg = <0x58003000 0x1000>, <0x70000000 0x4000000>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi b/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi index aef02e6421a3..7d11c50b9e40 100644 --- a/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi +++ b/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi @@ -391,8 +391,12 @@ &qspi { pinctrl-names = "default", "sleep"; - pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>; - pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>; + pinctrl-0 = <&qspi_clk_pins_a + &qspi_bk1_pins_a + &qspi_cs1_pins_a>; + pinctrl-1 = <&qspi_clk_sleep_pins_a + &qspi_bk1_sleep_pins_a + &qspi_cs1_sleep_pins_a>; reg = <0x58003000 0x1000>, <0x70000000 0x4000000>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi index 002f221f1694..c06edd2eacb0 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi @@ -428,8 +428,12 @@ &qspi { pinctrl-names = "default", "sleep"; - pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>; - pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>; + pinctrl-0 = <&qspi_clk_pins_a + &qspi_bk1_pins_a + &qspi_cs1_pins_a>; + pinctrl-1 = <&qspi_clk_sleep_pins_a + &qspi_bk1_sleep_pins_a + &qspi_cs1_sleep_pins_a>; reg = <0x58003000 0x1000>, <0x70000000 0x4000000>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi index 134a798ad3f2..bb40fb46da81 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi @@ -247,8 +247,12 @@ &qspi { pinctrl-names = "default", "sleep"; - pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>; - pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>; + pinctrl-0 = <&qspi_clk_pins_a + &qspi_bk1_pins_a + &qspi_cs1_pins_a>; + pinctrl-1 = <&qspi_clk_sleep_pins_a + &qspi_bk1_sleep_pins_a + &qspi_cs1_sleep_pins_a>; reg = <0x58003000 0x1000>, <0x70000000 0x200000>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts index 42ed4a04a12e..6280c5e86a12 100644 --- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts @@ -345,7 +345,7 @@ }; &i2c2 { - tca9548@70 { + i2c-mux@70 { compatible = "nxp,pca9548"; pinctrl-0 = <&pinctrl_i2c_mux_reset>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts index f892977da9e4..c00d39562a10 100644 --- a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts @@ -340,7 +340,7 @@ }; &i2c2 { - tca9548@70 { + i2c-mux@70 { compatible = "nxp,pca9548"; pinctrl-0 = <&pinctrl_i2c_mux_reset>; pinctrl-names = "default"; diff --git a/arch/arm/mach-footbridge/isa-rtc.c b/arch/arm/mach-footbridge/isa-rtc.c index b8f741a3a37e..237b828dd2f1 100644 --- a/arch/arm/mach-footbridge/isa-rtc.c +++ b/arch/arm/mach-footbridge/isa-rtc.c @@ -20,7 +20,6 @@ #include <linux/init.h> #include <linux/mc146818rtc.h> -#include <linux/bcd.h> #include <linux/io.h> #include "common.h" diff --git a/arch/arm/mach-imx/cpu-imx25.c b/arch/arm/mach-imx/cpu-imx25.c index 3e63445cde06..cc86977d0a34 100644 --- a/arch/arm/mach-imx/cpu-imx25.c +++ b/arch/arm/mach-imx/cpu-imx25.c @@ -23,6 +23,7 @@ static int mx25_read_cpu_rev(void) np = of_find_compatible_node(NULL, NULL, "fsl,imx25-iim"); iim_base = of_iomap(np, 0); + of_node_put(np); BUG_ON(!iim_base); rev = readl(iim_base + MXC_IIMSREV); iounmap(iim_base); diff --git a/arch/arm/mach-imx/cpu-imx27.c b/arch/arm/mach-imx/cpu-imx27.c index bf70e13bbe9e..1d2893908368 100644 --- a/arch/arm/mach-imx/cpu-imx27.c +++ b/arch/arm/mach-imx/cpu-imx27.c @@ -28,6 +28,7 @@ static int mx27_read_cpu_rev(void) np = of_find_compatible_node(NULL, NULL, "fsl,imx27-ccm"); ccm_base = of_iomap(np, 0); + of_node_put(np); BUG_ON(!ccm_base); /* * now we have access to the IO registers. As we need diff --git a/arch/arm/mach-imx/cpu-imx31.c b/arch/arm/mach-imx/cpu-imx31.c index b9c24b851d1a..35c544924e50 100644 --- a/arch/arm/mach-imx/cpu-imx31.c +++ b/arch/arm/mach-imx/cpu-imx31.c @@ -39,6 +39,7 @@ static int mx31_read_cpu_rev(void) np = of_find_compatible_node(NULL, NULL, "fsl,imx31-iim"); iim_base = of_iomap(np, 0); + of_node_put(np); BUG_ON(!iim_base); /* read SREV register from IIM module */ diff --git a/arch/arm/mach-imx/cpu-imx35.c b/arch/arm/mach-imx/cpu-imx35.c index 80e7d8ab9f1b..1fe75b39c2d9 100644 --- a/arch/arm/mach-imx/cpu-imx35.c +++ b/arch/arm/mach-imx/cpu-imx35.c @@ -21,6 +21,7 @@ static int mx35_read_cpu_rev(void) np = of_find_compatible_node(NULL, NULL, "fsl,imx35-iim"); iim_base = of_iomap(np, 0); + of_node_put(np); BUG_ON(!iim_base); rev = imx_readl(iim_base + MXC_IIMSREV); diff --git a/arch/arm/mach-imx/cpu-imx5.c b/arch/arm/mach-imx/cpu-imx5.c index ad56263778f9..a67c89bf155d 100644 --- a/arch/arm/mach-imx/cpu-imx5.c +++ b/arch/arm/mach-imx/cpu-imx5.c @@ -28,6 +28,7 @@ static u32 imx5_read_srev_reg(const char *compat) np = of_find_compatible_node(NULL, NULL, compat); iim_base = of_iomap(np, 0); + of_node_put(np); WARN_ON(!iim_base); srev = readl(iim_base + IIM_SREV) & 0xff; diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index 538a960257cc..7ec7ada287e0 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -4,6 +4,7 @@ menuconfig ARCH_OMAP1 depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 depends on CPU_LITTLE_ENDIAN depends on ATAGS + select ARCH_OMAP select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_OMAP select CLKSRC_MMIO @@ -45,10 +46,6 @@ config ARCH_OMAP16XX select CPU_ARM926T select OMAP_DM_TIMER -config ARCH_OMAP1_ANY - select ARCH_OMAP - def_bool ARCH_OMAP730 || ARCH_OMAP850 || ARCH_OMAP15XX || ARCH_OMAP16XX - config ARCH_OMAP bool diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index 506074b86333..0615cb0ba580 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -3,8 +3,6 @@ # Makefile for the linux kernel. # -ifdef CONFIG_ARCH_OMAP1_ANY - # Common support obj-y := io.o id.o sram-init.o sram.o time.o irq.o mux.o flash.o \ serial.o devices.o dma.o omap-dma.o fb.o @@ -59,5 +57,3 @@ obj-$(CONFIG_ARCH_OMAP730) += gpio7xx.o obj-$(CONFIG_ARCH_OMAP850) += gpio7xx.o obj-$(CONFIG_ARCH_OMAP15XX) += gpio15xx.o obj-$(CONFIG_ARCH_OMAP16XX) += gpio16xx.o - -endif diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c index c675f11de99d..61fa26efd865 100644 --- a/arch/arm/mach-omap1/gpio15xx.c +++ b/arch/arm/mach-omap1/gpio15xx.c @@ -11,6 +11,7 @@ #include <linux/gpio.h> #include <linux/platform_data/gpio-omap.h> #include <linux/soc/ti/omap1-soc.h> +#include <asm/irq.h> #include "irqs.h" diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index d2db9b8aed3f..0074b011a05a 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -22,17 +22,14 @@ * The machine specific code may provide the extra mapping besides the * default mapping provided here. */ -static struct map_desc omap_io_desc[] __initdata = { +#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850) +static struct map_desc omap7xx_io_desc[] __initdata = { { .virtual = OMAP1_IO_VIRT, .pfn = __phys_to_pfn(OMAP1_IO_PHYS), .length = OMAP1_IO_SIZE, .type = MT_DEVICE - } -}; - -#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850) -static struct map_desc omap7xx_io_desc[] __initdata = { + }, { .virtual = OMAP7XX_DSP_BASE, .pfn = __phys_to_pfn(OMAP7XX_DSP_START), @@ -50,6 +47,12 @@ static struct map_desc omap7xx_io_desc[] __initdata = { #ifdef CONFIG_ARCH_OMAP15XX static struct map_desc omap1510_io_desc[] __initdata = { { + .virtual = OMAP1_IO_VIRT, + .pfn = __phys_to_pfn(OMAP1_IO_PHYS), + .length = OMAP1_IO_SIZE, + .type = MT_DEVICE + }, + { .virtual = OMAP1510_DSP_BASE, .pfn = __phys_to_pfn(OMAP1510_DSP_START), .length = OMAP1510_DSP_SIZE, @@ -66,6 +69,12 @@ static struct map_desc omap1510_io_desc[] __initdata = { #if defined(CONFIG_ARCH_OMAP16XX) static struct map_desc omap16xx_io_desc[] __initdata = { { + .virtual = OMAP1_IO_VIRT, + .pfn = __phys_to_pfn(OMAP1_IO_PHYS), + .length = OMAP1_IO_SIZE, + .type = MT_DEVICE + }, + { .virtual = OMAP16XX_DSP_BASE, .pfn = __phys_to_pfn(OMAP16XX_DSP_START), .length = OMAP16XX_DSP_SIZE, @@ -79,18 +88,9 @@ static struct map_desc omap16xx_io_desc[] __initdata = { }; #endif -/* - * Maps common IO regions for omap1 - */ -static void __init omap1_map_common_io(void) -{ - iotable_init(omap_io_desc, ARRAY_SIZE(omap_io_desc)); -} - #if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850) void __init omap7xx_map_io(void) { - omap1_map_common_io(); iotable_init(omap7xx_io_desc, ARRAY_SIZE(omap7xx_io_desc)); } #endif @@ -98,7 +98,6 @@ void __init omap7xx_map_io(void) #ifdef CONFIG_ARCH_OMAP15XX void __init omap15xx_map_io(void) { - omap1_map_common_io(); iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc)); } #endif @@ -106,7 +105,6 @@ void __init omap15xx_map_io(void) #if defined(CONFIG_ARCH_OMAP16XX) void __init omap16xx_map_io(void) { - omap1_map_common_io(); iotable_init(omap16xx_io_desc, ARRAY_SIZE(omap16xx_io_desc)); } #endif diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index 05c25c432449..b1632cbe37e6 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -89,7 +89,6 @@ static struct omap_mcbsp_ops omap1_mcbsp_ops = { #define OMAP1610_MCBSP2_BASE 0xfffb1000 #define OMAP1610_MCBSP3_BASE 0xe1017000 -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) struct resource omap7xx_mcbsp_res[][6] = { { { @@ -159,14 +158,7 @@ static struct omap_mcbsp_platform_data omap7xx_mcbsp_pdata[] = { }; #define OMAP7XX_MCBSP_RES_SZ ARRAY_SIZE(omap7xx_mcbsp_res[1]) #define OMAP7XX_MCBSP_COUNT ARRAY_SIZE(omap7xx_mcbsp_res) -#else -#define omap7xx_mcbsp_res_0 NULL -#define omap7xx_mcbsp_pdata NULL -#define OMAP7XX_MCBSP_RES_SZ 0 -#define OMAP7XX_MCBSP_COUNT 0 -#endif -#ifdef CONFIG_ARCH_OMAP15XX struct resource omap15xx_mcbsp_res[][6] = { { { @@ -266,14 +258,7 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = { }; #define OMAP15XX_MCBSP_RES_SZ ARRAY_SIZE(omap15xx_mcbsp_res[1]) #define OMAP15XX_MCBSP_COUNT ARRAY_SIZE(omap15xx_mcbsp_res) -#else -#define omap15xx_mcbsp_res_0 NULL -#define omap15xx_mcbsp_pdata NULL -#define OMAP15XX_MCBSP_RES_SZ 0 -#define OMAP15XX_MCBSP_COUNT 0 -#endif -#ifdef CONFIG_ARCH_OMAP16XX struct resource omap16xx_mcbsp_res[][6] = { { { @@ -373,12 +358,6 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = { }; #define OMAP16XX_MCBSP_RES_SZ ARRAY_SIZE(omap16xx_mcbsp_res[1]) #define OMAP16XX_MCBSP_COUNT ARRAY_SIZE(omap16xx_mcbsp_res) -#else -#define omap16xx_mcbsp_res_0 NULL -#define omap16xx_mcbsp_pdata NULL -#define OMAP16XX_MCBSP_RES_SZ 0 -#define OMAP16XX_MCBSP_COUNT 0 -#endif static void omap_mcbsp_register_board_cfg(struct resource *res, int res_count, struct omap_mcbsp_platform_data *config, int size) diff --git a/arch/arm/mach-omap1/pm.h b/arch/arm/mach-omap1/pm.h index d9165709c532..0d1f092821ff 100644 --- a/arch/arm/mach-omap1/pm.h +++ b/arch/arm/mach-omap1/pm.h @@ -106,13 +106,6 @@ #define OMAP7XX_IDLECT3 0xfffece24 #define OMAP7XX_IDLE_LOOP_REQUEST 0x0C00 -#if !defined(CONFIG_ARCH_OMAP730) && \ - !defined(CONFIG_ARCH_OMAP850) && \ - !defined(CONFIG_ARCH_OMAP15XX) && \ - !defined(CONFIG_ARCH_OMAP16XX) -#warning "Power management for this processor not implemented yet" -#endif - #ifndef __ASSEMBLER__ #include <linux/clk.h> diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index b90d98bae68d..03e25af6f48c 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -45,6 +45,8 @@ config MACH_PXA27X_DT config MACH_PXA3XX_DT bool "Support PXA3xx platforms from device tree" select CPU_PXA300 + select CPU_PXA310 + select CPU_PXA320 select PINCTRL select POWER_SUPPLY select PXA3xx |