Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "This round of clk driver and framework updates is heavy on the driver
  update side. The two main highlights in the core framework are the
  addition of an bulk clk_get API that handles optional clks and an
  extra debugfs file that tells the developer about the current parent
  of a clk.

  The driver updates are dominated by i.MX in the diffstat, but that is
  mostly because that SoC has started converting to the clk_hw style of
  clk registration. The next big update is in the Amlogic meson clk
  driver that gained some support for audio, cpu, and temperature clks
  while fixing some PLL issues. Finally, the biggest thing that stands
  out is the conversion of a large part of the Allwinner sunxi-ng driver
  to the new clk parent scheme that uses less strings and more pointer
  comparisons to match clk parents and children up.

  In general, it looks like we have a lot of little fixes and tweaks
  here and there to clk data along with the normal addition of a handful
  of new drivers and a couple new core framework features.

  Core:
   - Add a 'clk_parent' file in clk debugfs
   - Add a clk_bulk_get_optional() API (with devm too)

  New Drivers:
   - Support gated clk controller on MIPS based BCM63XX SoCs
   - Support SiLabs Si5341 and Si5340 chips
   - Support for CPU clks on Raspberry Pi devices
   - Audsys clock driver for MediaTek MT8516 SoCs

  Updates:
   - Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme
   - Small frequency support for SiLabs Si544 chips
   - Slow clk support for AT91 SAM9X60 SoCs
   - Remove dead code in various clk drivers (-Wunused)
   - Support for Marvell 98DX1135 SoCs
   - Get duty cycle of generic pwm clks
   - Improvement in mmc phase calculation and cleanup of some rate defintions
   - Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs
   - Add GPIO, SNVS and GIC clocks for i.MX8 drivers
   - Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock
   - Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting
   - Add clks for new Exynos5422 Dynamic Memory Controller driver
   - Clock definition for Exynos4412 Mali
   - Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3
   - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M
   - Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs
   - TI clock probing done from DT by default instead of firmware
   - Fix Amlogic Meson mpll fractional part and spread sprectrum issues
   - Add Amlogic meson8 audio clocks
   - Add Amlogic g12a temperature sensors clocks
   - Add Amlogic g12a and g12b cpu clocks
   - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N
   - Add CMM (Color Management Module) clocks on Renesas R-Car M3-W
   - Add Clock Domain support on Renesas RZ/N1"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (190 commits)
  clk: consoldiate the __clk_get_hw() declarations
  clk: sprd: Add check for return value of sprd_clk_regmap_init()
  clk: lochnagar: Update DT binding doc to include the primary SPDIF MCLK
  clk: Add Si5341/Si5340 driver
  dt-bindings: clock: Add silabs,si5341
  clk: clk-si544: Implement small frequency change support
  clk: add BCM63XX gated clock controller driver
  devicetree: document the BCM63XX gated clock bindings
  clk: at91: sckc: use dedicated functions to unregister clock
  clk: at91: sckc: improve error path for sama5d4 sck registration
  clk: at91: sckc: remove unnecessary line
  clk: at91: sckc: improve error path for sam9x5 sck register
  clk: at91: sckc: add support to free slow clock osclillator
  clk: at91: sckc: add support to free slow rc oscillator
  clk: at91: sckc: add support to free slow oscillator
  clk: rockchip: export HDMIPHY clock on rk3228
  clk: rockchip: add watchdog pclk on rk3328
  clk: rockchip: add clock id for hdmi_phy special clock on rk3228
  clk: rockchip: add clock id for watchdog pclk on rk3328
  clk: at91: sckc: add support for SAM9X60
  ...

2 files changed, 212 insertions, 38 deletions

diff --git a/drivers/clk/keystone/Kconfig b/drivers/clk/keystone/Kconfig
index 0ca63014718a..38aeefb1e808 100644
--- a/drivers/clk/keystone/Kconfig
+++ b/drivers/clk/keystone/Kconfig
@@ -15,3 +15,14 @@ config TI_SCI_CLK
 	  This adds the clock driver support over TI System Control Interface.
 	  If you wish to use clock resources from the PMMC firmware, say Y.
 	  Otherwise, say N.
+
+config TI_SCI_CLK_PROBE_FROM_FW
+	bool "Probe available clocks from firmware"
+	depends on TI_SCI_CLK
+	default n
+	help
+	  Forces the TI SCI clock driver to probe available clocks from the
+	  firmware. By default, only the used clocks are probed from DT.
+	  This is mostly only useful for debugging purposes, and will
+	  increase the boot time of the device. If you want the clocks probed
+	  from firmware, say Y. Otherwise, say N.
diff --git a/drivers/clk/keystone/sci-clk.c b/drivers/clk/keystone/sci-clk.c
index 4cb70bed89a9..7edf8c8432b6 100644
--- a/drivers/clk/keystone/sci-clk.c
+++ b/drivers/clk/keystone/sci-clk.c
@@ -23,6 +23,7 @@
 #include <linux/slab.h>
 #include <linux/soc/ti/ti_sci_protocol.h>
 #include <linux/bsearch.h>
+#include <linux/list_sort.h>
 
 #define SCI_CLK_SSC_ENABLE		BIT(0)
 #define SCI_CLK_ALLOW_FREQ_CHANGE	BIT(1)
@@ -52,14 +53,16 @@ struct sci_clk_provider {
  * @num_parents: Number of parents for this clock
  * @provider:	 Master clock provider
  * @flags:	 Flags for the clock
+ * @node:	 Link for handling clocks probed via DT
  */
 struct sci_clk {
 	struct clk_hw hw;
 	u16 dev_id;
-	u8 clk_id;
-	u8 num_parents;
+	u32 clk_id;
+	u32 num_parents;
 	struct sci_clk_provider *provider;
 	u8 flags;
+	struct list_head node;
 };
 
 #define to_sci_clk(_hw) container_of(_hw, struct sci_clk, hw)
@@ -218,11 +221,11 @@ static int sci_clk_set_rate(struct clk_hw *hw, unsigned long rate,
 static u8 sci_clk_get_parent(struct clk_hw *hw)
 {
 	struct sci_clk *clk = to_sci_clk(hw);
-	u8 parent_id;
+	u32 parent_id = 0;
 	int ret;
 
 	ret = clk->provider->ops->get_parent(clk->provider->sci, clk->dev_id,
-					     clk->clk_id, &parent_id);
+					     clk->clk_id, (void *)&parent_id);
 	if (ret) {
 		dev_err(clk->provider->dev,
 			"get-parent failed for dev=%d, clk=%d, ret=%d\n",
@@ -230,7 +233,9 @@ static u8 sci_clk_get_parent(struct clk_hw *hw)
 		return 0;
 	}
 
-	return parent_id - clk->clk_id - 1;
+	parent_id = parent_id - clk->clk_id - 1;
+
+	return (u8)parent_id;
 }
 
 /**
@@ -280,8 +285,8 @@ static int _sci_clk_build(struct sci_clk_provider *provider,
 	int i;
 	int ret = 0;
 
-	name = kasprintf(GFP_KERNEL, "%s:%d:%d", dev_name(provider->dev),
-			 sci_clk->dev_id, sci_clk->clk_id);
+	name = kasprintf(GFP_KERNEL, "clk:%d:%d", sci_clk->dev_id,
+			 sci_clk->clk_id);
 
 	init.name = name;
 
@@ -306,8 +311,7 @@ static int _sci_clk_build(struct sci_clk_provider *provider,
 		for (i = 0; i < sci_clk->num_parents; i++) {
 			char *parent_name;
 
-			parent_name = kasprintf(GFP_KERNEL, "%s:%d:%d",
-						dev_name(provider->dev),
+			parent_name = kasprintf(GFP_KERNEL, "clk:%d:%d",
 						sci_clk->dev_id,
 						sci_clk->clk_id + 1 + i);
 			if (!parent_name) {
@@ -404,22 +408,9 @@ static const struct of_device_id ti_sci_clk_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, ti_sci_clk_of_match);
 
-/**
- * ti_sci_clk_probe - Probe function for the TI SCI clock driver
- * @pdev: platform device pointer to be probed
- *
- * Probes the TI SCI clock device. Allocates a new clock provider
- * and registers this to the common clock framework. Also applies
- * any required flags to the identified clocks via clock lists
- * supplied from DT. Returns 0 for success, negative error value
- * for failure.
- */
-static int ti_sci_clk_probe(struct platform_device *pdev)
+#ifdef CONFIG_TI_SCI_CLK_PROBE_FROM_FW
+static int ti_sci_scan_clocks_from_fw(struct sci_clk_provider *provider)
 {
-	struct device *dev = &pdev->dev;
-	struct device_node *np = dev->of_node;
-	struct sci_clk_provider *provider;
-	const struct ti_sci_handle *handle;
 	int ret;
 	int num_clks = 0;
 	struct sci_clk **clks = NULL;
@@ -428,24 +419,14 @@ static int ti_sci_clk_probe(struct platform_device *pdev)
 	int max_clks = 0;
 	int clk_id = 0;
 	int dev_id = 0;
-	u8 num_parents;
+	u32 num_parents = 0;
 	int gap_size = 0;
-
-	handle = devm_ti_sci_get_handle(dev);
-	if (IS_ERR(handle))
-		return PTR_ERR(handle);
-
-	provider = devm_kzalloc(dev, sizeof(*provider), GFP_KERNEL);
-	if (!provider)
-		return -ENOMEM;
-
-	provider->sci = handle;
-	provider->ops = &handle->ops.clk_ops;
-	provider->dev = dev;
+	struct device *dev = provider->dev;
 
 	while (1) {
 		ret = provider->ops->get_num_parents(provider->sci, dev_id,
-						     clk_id, &num_parents);
+						     clk_id,
+						     (void *)&num_parents);
 		if (ret) {
 			gap_size++;
 			if (!clk_id) {
@@ -502,6 +483,188 @@ static int ti_sci_clk_probe(struct platform_device *pdev)
 
 	devm_kfree(dev, clks);
 
+	return 0;
+}
+
+#else
+
+static int _cmp_sci_clk_list(void *priv, struct list_head *a,
+			     struct list_head *b)
+{
+	struct sci_clk *ca = container_of(a, struct sci_clk, node);
+	struct sci_clk *cb = container_of(b, struct sci_clk, node);
+
+	return _cmp_sci_clk(ca, &cb);
+}
+
+static int ti_sci_scan_clocks_from_dt(struct sci_clk_provider *provider)
+{
+	struct device *dev = provider->dev;
+	struct device_node *np = NULL;
+	int ret;
+	int index;
+	struct of_phandle_args args;
+	struct list_head clks;
+	struct sci_clk *sci_clk, *prev;
+	int num_clks = 0;
+	int num_parents;
+	int clk_id;
+	const char * const clk_names[] = {
+		"clocks", "assigned-clocks", "assigned-clock-parents", NULL
+	};
+	const char * const *clk_name;
+
+	INIT_LIST_HEAD(&clks);
+
+	clk_name = clk_names;
+
+	while (*clk_name) {
+		np = of_find_node_with_property(np, *clk_name);
+		if (!np) {
+			clk_name++;
+			break;
+		}
+
+		if (!of_device_is_available(np))
+			continue;
+
+		index = 0;
+
+		do {
+			ret = of_parse_phandle_with_args(np, *clk_name,
+							 "#clock-cells", index,
+							 &args);
+			if (ret)
+				break;
+
+			if (args.args_count == 2 && args.np == dev->of_node) {
+				sci_clk = devm_kzalloc(dev, sizeof(*sci_clk),
+						       GFP_KERNEL);
+				if (!sci_clk)
+					return -ENOMEM;
+
+				sci_clk->dev_id = args.args[0];
+				sci_clk->clk_id = args.args[1];
+				sci_clk->provider = provider;
+				provider->ops->get_num_parents(provider->sci,
+							       sci_clk->dev_id,
+							       sci_clk->clk_id,
+							       (void *)&sci_clk->num_parents);
+				list_add_tail(&sci_clk->node, &clks);
+
+				num_clks++;
+
+				num_parents = sci_clk->num_parents;
+				if (num_parents == 1)
+					num_parents = 0;
+
+				/*
+				 * Linux kernel has inherent limitation
+				 * of 255 clock parents at the moment.
+				 * Right now, it is not expected that
+				 * any mux clock from sci-clk driver
+				 * would exceed that limit either, but
+				 * the ABI basically provides that
+				 * possibility. Print out a warning if
+				 * this happens for any clock.
+				 */
+				if (num_parents >= 255) {
+					dev_warn(dev, "too many parents for dev=%d, clk=%d (%d), cropping to 255.\n",
+						 sci_clk->dev_id,
+						 sci_clk->clk_id, num_parents);
+					num_parents = 255;
+				}
+
+				clk_id = args.args[1] + 1;
+
+				while (num_parents--) {
+					sci_clk = devm_kzalloc(dev,
+							       sizeof(*sci_clk),
+							       GFP_KERNEL);
+					if (!sci_clk)
+						return -ENOMEM;
+					sci_clk->dev_id = args.args[0];
+					sci_clk->clk_id = clk_id++;
+					sci_clk->provider = provider;
+					list_add_tail(&sci_clk->node, &clks);
+
+					num_clks++;
+				}
+			}
+
+			index++;
+		} while (args.np);
+	}
+
+	list_sort(NULL, &clks, _cmp_sci_clk_list);
+
+	provider->clocks = devm_kmalloc_array(dev, num_clks, sizeof(sci_clk),
+					      GFP_KERNEL);
+	if (!provider->clocks)
+		return -ENOMEM;
+
+	num_clks = 0;
+	prev = NULL;
+
+	list_for_each_entry(sci_clk, &clks, node) {
+		if (prev && prev->dev_id == sci_clk->dev_id &&
+		    prev->clk_id == sci_clk->clk_id)
+			continue;
+
+		provider->clocks[num_clks++] = sci_clk;
+		prev = sci_clk;
+	}
+
+	provider->num_clocks = num_clks;
+
+	return 0;
+}
+#endif
+
+/**
+ * ti_sci_clk_probe - Probe function for the TI SCI clock driver
+ * @pdev: platform device pointer to be probed
+ *
+ * Probes the TI SCI clock device. Allocates a new clock provider
+ * and registers this to the common clock framework. Also applies
+ * any required flags to the identified clocks via clock lists
+ * supplied from DT. Returns 0 for success, negative error value
+ * for failure.
+ */
+static int ti_sci_clk_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct sci_clk_provider *provider;
+	const struct ti_sci_handle *handle;
+	int ret;
+
+	handle = devm_ti_sci_get_handle(dev);
+	if (IS_ERR(handle))
+		return PTR_ERR(handle);
+
+	provider = devm_kzalloc(dev, sizeof(*provider), GFP_KERNEL);
+	if (!provider)
+		return -ENOMEM;
+
+	provider->sci = handle;
+	provider->ops = &handle->ops.clk_ops;
+	provider->dev = dev;
+
+#ifdef CONFIG_TI_SCI_CLK_PROBE_FROM_FW
+	ret = ti_sci_scan_clocks_from_fw(provider);
+	if (ret) {
+		dev_err(dev, "scan clocks from FW failed: %d\n", ret);
+		return ret;
+	}
+#else
+	ret = ti_sci_scan_clocks_from_dt(provider);
+	if (ret) {
+		dev_err(dev, "scan clocks from DT failed: %d\n", ret);
+		return ret;
+	}
+#endif
+
 	ret = ti_sci_init_clocks(provider);
 	if (ret) {
 		pr_err("ti-sci-init-clocks failed.\n");