summaryrefslogtreecommitdiffstats
path: root/drivers/memory
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2022-03-23 18:23:13 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2022-03-23 18:23:13 -0700
commitb4bc93bd76d4da32600795cd323c971f00a2e788 (patch)
tree8aebc8ae647d83ffa091c89bb164e7c24b0edfa9 /drivers/memory
parentbaaa68a9796ef2cadfe5caaf4c730412eda0f31c (diff)
parent339ac71b233ee9ab5036be3abca0e5df793b5f64 (diff)
downloadlinux-stable-b4bc93bd76d4da32600795cd323c971f00a2e788.tar.gz
linux-stable-b4bc93bd76d4da32600795cd323c971f00a2e788.tar.bz2
linux-stable-b4bc93bd76d4da32600795cd323c971f00a2e788.zip
Merge tag 'arm-drivers-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Arnd Bergmann: "There are a few separately maintained driver subsystems that we merge through the SoC tree, notable changes are: - Memory controller updates, mainly for Tegra and Mediatek SoCs, and clarifications for the memory controller DT bindings - SCMI firmware interface updates, in particular a new transport based on OPTEE and support for atomic operations. - Cleanups to the TEE subsystem, refactoring its memory management For SoC specific drivers without a separate subsystem, changes include - Smaller updates and fixes for TI, AT91/SAMA5, Qualcomm and NXP Layerscape SoCs. - Driver support for Microchip SAMA5D29, Tesla FSD, Renesas RZ/G2L, and Qualcomm SM8450. - Better power management on Mediatek MT81xx, NXP i.MX8MQ and older NVIDIA Tegra chips" * tag 'arm-drivers-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (154 commits) ARM: spear: fix typos in comments soc/microchip: fix invalid free in mpfs_sys_controller_delete soc: s4: Add support for power domains controller dt-bindings: power: add Amlogic s4 power domains bindings ARM: at91: add support in soc driver for new SAMA5D29 soc: mediatek: mmsys: add sw0_rst_offset in mmsys driver data dt-bindings: memory: renesas,rpc-if: Document RZ/V2L SoC memory: emif: check the pointer temp in get_device_details() memory: emif: Add check for setup_interrupts dt-bindings: arm: mediatek: mmsys: add support for MT8186 dt-bindings: mediatek: add compatible for MT8186 pwrap soc: mediatek: pwrap: add pwrap driver for MT8186 SoC soc: mediatek: mmsys: add mmsys reset control for MT8186 soc: mediatek: mtk-infracfg: Disable ACP on MT8192 soc: ti: k3-socinfo: Add AM62x JTAG ID soc: mediatek: add MTK mutex support for MT8186 soc: mediatek: mmsys: add mt8186 mmsys routing table soc: mediatek: pm-domains: Add support for mt8186 dt-bindings: power: Add MT8186 power domains soc: mediatek: pm-domains: Add support for mt8195 ...
Diffstat (limited to 'drivers/memory')
-rw-r--r--drivers/memory/brcmstb_dpfe.c2
-rw-r--r--drivers/memory/emif.c8
-rw-r--r--drivers/memory/fsl_ifc.c9
-rw-r--r--drivers/memory/mtk-smi.c57
-rw-r--r--drivers/memory/of_memory.c29
-rw-r--r--drivers/memory/tegra/Kconfig1
-rw-r--r--drivers/memory/tegra/tegra20-emc.c2
-rw-r--r--drivers/memory/tegra/tegra210-emc-core.c2
-rw-r--r--drivers/memory/tegra/tegra30-emc.c131
9 files changed, 211 insertions, 30 deletions
diff --git a/drivers/memory/brcmstb_dpfe.c b/drivers/memory/brcmstb_dpfe.c
index f43ba69fbb3e..14412002775d 100644
--- a/drivers/memory/brcmstb_dpfe.c
+++ b/drivers/memory/brcmstb_dpfe.c
@@ -424,7 +424,7 @@ static void __finalize_command(struct brcmstb_dpfe_priv *priv)
/*
* It depends on the API version which MBOX register we have to write to
- * to signal we are done.
+ * signal we are done.
*/
release_mbox = (priv->dpfe_api->version < 2)
? REG_TO_HOST_MBOX : REG_TO_DCPU_MBOX;
diff --git a/drivers/memory/emif.c b/drivers/memory/emif.c
index 762d0c0f0716..ecc78d6f89ed 100644
--- a/drivers/memory/emif.c
+++ b/drivers/memory/emif.c
@@ -1025,7 +1025,7 @@ static struct emif_data *__init_or_module get_device_details(
temp = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL);
dev_info = devm_kzalloc(dev, sizeof(*dev_info), GFP_KERNEL);
- if (!emif || !pd || !dev_info) {
+ if (!emif || !temp || !dev_info) {
dev_err(dev, "%s:%d: allocation error\n", __func__, __LINE__);
goto error;
}
@@ -1117,7 +1117,7 @@ static int __init_or_module emif_probe(struct platform_device *pdev)
{
struct emif_data *emif;
struct resource *res;
- int irq;
+ int irq, ret;
if (pdev->dev.of_node)
emif = of_get_memory_device_details(pdev->dev.of_node, &pdev->dev);
@@ -1147,7 +1147,9 @@ static int __init_or_module emif_probe(struct platform_device *pdev)
emif_onetime_settings(emif);
emif_debugfs_init(emif);
disable_and_clear_all_interrupts(emif);
- setup_interrupts(emif, irq);
+ ret = setup_interrupts(emif, irq);
+ if (ret)
+ goto error;
/* One-time actions taken on probing the first device */
if (!emif1) {
diff --git a/drivers/memory/fsl_ifc.c b/drivers/memory/fsl_ifc.c
index 75a8c38df939..2f6939da21cd 100644
--- a/drivers/memory/fsl_ifc.c
+++ b/drivers/memory/fsl_ifc.c
@@ -88,6 +88,7 @@ static int fsl_ifc_ctrl_remove(struct platform_device *dev)
{
struct fsl_ifc_ctrl *ctrl = dev_get_drvdata(&dev->dev);
+ of_platform_depopulate(&dev->dev);
free_irq(ctrl->nand_irq, ctrl);
free_irq(ctrl->irq, ctrl);
@@ -285,8 +286,16 @@ static int fsl_ifc_ctrl_probe(struct platform_device *dev)
}
}
+ /* legacy dts may still use "simple-bus" compatible */
+ ret = of_platform_populate(dev->dev.of_node, NULL, NULL,
+ &dev->dev);
+ if (ret)
+ goto err_free_nandirq;
+
return 0;
+err_free_nandirq:
+ free_irq(fsl_ifc_ctrl_dev->nand_irq, fsl_ifc_ctrl_dev);
err_free_irq:
free_irq(fsl_ifc_ctrl_dev->irq, fsl_ifc_ctrl_dev);
err_unmap_nandirq:
diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
index 40408a88f464..86a3d34f418e 100644
--- a/drivers/memory/mtk-smi.c
+++ b/drivers/memory/mtk-smi.c
@@ -8,6 +8,7 @@
#include <linux/device.h>
#include <linux/err.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_platform.h>
@@ -32,6 +33,10 @@
#define SMI_DUMMY 0x444
/* SMI LARB */
+#define SMI_LARB_SLP_CON 0xc
+#define SLP_PROT_EN BIT(0)
+#define SLP_PROT_RDY BIT(16)
+
#define SMI_LARB_CMD_THRT_CON 0x24
#define SMI_LARB_THRT_RD_NU_LMT_MSK GENMASK(7, 4)
#define SMI_LARB_THRT_RD_NU_LMT (5 << 4)
@@ -81,6 +86,7 @@
#define MTK_SMI_FLAG_THRT_UPDATE BIT(0)
#define MTK_SMI_FLAG_SW_FLAG BIT(1)
+#define MTK_SMI_FLAG_SLEEP_CTL BIT(2)
#define MTK_SMI_CAPS(flags, _x) (!!((flags) & (_x)))
struct mtk_smi_reg_pair {
@@ -94,8 +100,6 @@ enum mtk_smi_type {
MTK_SMI_GEN2_SUB_COMM, /* gen2 smi sub common */
};
-#define MTK_SMI_CLK_NR_MAX 4
-
/* larbs: Require apb/smi clocks while gals is optional. */
static const char * const mtk_smi_larb_clks[] = {"apb", "smi", "gals"};
#define MTK_SMI_LARB_REQ_CLK_NR 2
@@ -106,6 +110,7 @@ static const char * const mtk_smi_larb_clks[] = {"apb", "smi", "gals"};
* sub common: Require apb/smi/gals0 clocks in has_gals case. Otherwise, only apb/smi are required.
*/
static const char * const mtk_smi_common_clks[] = {"apb", "smi", "gals0", "gals1"};
+#define MTK_SMI_CLK_NR_MAX ARRAY_SIZE(mtk_smi_common_clks)
#define MTK_SMI_COM_REQ_CLK_NR 2
#define MTK_SMI_COM_GALS_REQ_CLK_NR MTK_SMI_CLK_NR_MAX
#define MTK_SMI_SUB_COM_GALS_REQ_CLK_NR 3
@@ -335,13 +340,19 @@ static const struct mtk_smi_larb_gen mtk_smi_larb_mt8183 = {
/* IPU0 | IPU1 | CCU */
};
+static const struct mtk_smi_larb_gen mtk_smi_larb_mt8186 = {
+ .config_port = mtk_smi_larb_config_port_gen2_general,
+ .flags_general = MTK_SMI_FLAG_SLEEP_CTL,
+};
+
static const struct mtk_smi_larb_gen mtk_smi_larb_mt8192 = {
.config_port = mtk_smi_larb_config_port_gen2_general,
};
static const struct mtk_smi_larb_gen mtk_smi_larb_mt8195 = {
.config_port = mtk_smi_larb_config_port_gen2_general,
- .flags_general = MTK_SMI_FLAG_THRT_UPDATE | MTK_SMI_FLAG_SW_FLAG,
+ .flags_general = MTK_SMI_FLAG_THRT_UPDATE | MTK_SMI_FLAG_SW_FLAG |
+ MTK_SMI_FLAG_SLEEP_CTL,
.ostd = mtk_smi_larb_mt8195_ostd,
};
@@ -352,11 +363,32 @@ static const struct of_device_id mtk_smi_larb_of_ids[] = {
{.compatible = "mediatek,mt8167-smi-larb", .data = &mtk_smi_larb_mt8167},
{.compatible = "mediatek,mt8173-smi-larb", .data = &mtk_smi_larb_mt8173},
{.compatible = "mediatek,mt8183-smi-larb", .data = &mtk_smi_larb_mt8183},
+ {.compatible = "mediatek,mt8186-smi-larb", .data = &mtk_smi_larb_mt8186},
{.compatible = "mediatek,mt8192-smi-larb", .data = &mtk_smi_larb_mt8192},
{.compatible = "mediatek,mt8195-smi-larb", .data = &mtk_smi_larb_mt8195},
{}
};
+static int mtk_smi_larb_sleep_ctrl_enable(struct mtk_smi_larb *larb)
+{
+ int ret;
+ u32 tmp;
+
+ writel_relaxed(SLP_PROT_EN, larb->base + SMI_LARB_SLP_CON);
+ ret = readl_poll_timeout_atomic(larb->base + SMI_LARB_SLP_CON,
+ tmp, !!(tmp & SLP_PROT_RDY), 10, 1000);
+ if (ret) {
+ /* TODO: Reset this larb if it fails here. */
+ dev_err(larb->smi.dev, "sleep ctrl is not ready(0x%x).\n", tmp);
+ }
+ return ret;
+}
+
+static void mtk_smi_larb_sleep_ctrl_disable(struct mtk_smi_larb *larb)
+{
+ writel_relaxed(0, larb->base + SMI_LARB_SLP_CON);
+}
+
static int mtk_smi_device_link_common(struct device *dev, struct device **com_dev)
{
struct platform_device *smi_com_pdev;
@@ -466,9 +498,12 @@ static int __maybe_unused mtk_smi_larb_resume(struct device *dev)
int ret;
ret = clk_bulk_prepare_enable(larb->smi.clk_num, larb->smi.clks);
- if (ret < 0)
+ if (ret)
return ret;
+ if (MTK_SMI_CAPS(larb->larb_gen->flags_general, MTK_SMI_FLAG_SLEEP_CTL))
+ mtk_smi_larb_sleep_ctrl_disable(larb);
+
/* Configure the basic setting for this larb */
larb_gen->config_port(dev);
@@ -478,6 +513,13 @@ static int __maybe_unused mtk_smi_larb_resume(struct device *dev)
static int __maybe_unused mtk_smi_larb_suspend(struct device *dev)
{
struct mtk_smi_larb *larb = dev_get_drvdata(dev);
+ int ret;
+
+ if (MTK_SMI_CAPS(larb->larb_gen->flags_general, MTK_SMI_FLAG_SLEEP_CTL)) {
+ ret = mtk_smi_larb_sleep_ctrl_enable(larb);
+ if (ret)
+ return ret;
+ }
clk_bulk_disable_unprepare(larb->smi.clk_num, larb->smi.clks);
return 0;
@@ -530,6 +572,12 @@ static const struct mtk_smi_common_plat mtk_smi_common_mt8183 = {
F_MMU1_LARB(7),
};
+static const struct mtk_smi_common_plat mtk_smi_common_mt8186 = {
+ .type = MTK_SMI_GEN2,
+ .has_gals = true,
+ .bus_sel = F_MMU1_LARB(1) | F_MMU1_LARB(4) | F_MMU1_LARB(7),
+};
+
static const struct mtk_smi_common_plat mtk_smi_common_mt8192 = {
.type = MTK_SMI_GEN2,
.has_gals = true,
@@ -564,6 +612,7 @@ static const struct of_device_id mtk_smi_common_of_ids[] = {
{.compatible = "mediatek,mt8167-smi-common", .data = &mtk_smi_common_gen2},
{.compatible = "mediatek,mt8173-smi-common", .data = &mtk_smi_common_gen2},
{.compatible = "mediatek,mt8183-smi-common", .data = &mtk_smi_common_mt8183},
+ {.compatible = "mediatek,mt8186-smi-common", .data = &mtk_smi_common_mt8186},
{.compatible = "mediatek,mt8192-smi-common", .data = &mtk_smi_common_mt8192},
{.compatible = "mediatek,mt8195-smi-common-vdo", .data = &mtk_smi_common_mt8195_vdo},
{.compatible = "mediatek,mt8195-smi-common-vpp", .data = &mtk_smi_common_mt8195_vpp},
diff --git a/drivers/memory/of_memory.c b/drivers/memory/of_memory.c
index b94408954d85..dbdf87bc0b78 100644
--- a/drivers/memory/of_memory.c
+++ b/drivers/memory/of_memory.c
@@ -212,8 +212,10 @@ static int of_lpddr3_do_get_timings(struct device_node *np,
{
int ret;
- /* The 'reg' param required since DT has changed, used as 'max-freq' */
- ret = of_property_read_u32(np, "reg", &tim->max_freq);
+ ret = of_property_read_u32(np, "max-freq", &tim->max_freq);
+ if (ret)
+ /* Deprecated way of passing max-freq as 'reg' */
+ ret = of_property_read_u32(np, "reg", &tim->max_freq);
ret |= of_property_read_u32(np, "min-freq", &tim->min_freq);
ret |= of_property_read_u32(np, "tRFC", &tim->tRFC);
ret |= of_property_read_u32(np, "tRRD", &tim->tRRD);
@@ -316,14 +318,21 @@ const struct lpddr2_info
struct property *prop;
const char *cp;
int err;
-
- err = of_property_read_u32(np, "revision-id1", &info.revision_id1);
- if (err)
- info.revision_id1 = -ENOENT;
-
- err = of_property_read_u32(np, "revision-id2", &info.revision_id2);
- if (err)
- info.revision_id2 = -ENOENT;
+ u32 revision_id[2];
+
+ err = of_property_read_u32_array(np, "revision-id", revision_id, 2);
+ if (!err) {
+ info.revision_id1 = revision_id[0];
+ info.revision_id2 = revision_id[1];
+ } else {
+ err = of_property_read_u32(np, "revision-id1", &info.revision_id1);
+ if (err)
+ info.revision_id1 = -ENOENT;
+
+ err = of_property_read_u32(np, "revision-id2", &info.revision_id2);
+ if (err)
+ info.revision_id2 = -ENOENT;
+ }
err = of_property_read_u32(np, "io-width", &info.io_width);
if (err)
diff --git a/drivers/memory/tegra/Kconfig b/drivers/memory/tegra/Kconfig
index 7951764b4efe..3fe83d7c2bf8 100644
--- a/drivers/memory/tegra/Kconfig
+++ b/drivers/memory/tegra/Kconfig
@@ -28,6 +28,7 @@ config TEGRA30_EMC
default y
depends on ARCH_TEGRA_3x_SOC || COMPILE_TEST
select PM_OPP
+ select DDR
help
This driver is for the External Memory Controller (EMC) found on
Tegra30 chips. The EMC controls the external DRAM on the board.
diff --git a/drivers/memory/tegra/tegra20-emc.c b/drivers/memory/tegra/tegra20-emc.c
index 497b6edbf3ca..25ba3c5e4ad6 100644
--- a/drivers/memory/tegra/tegra20-emc.c
+++ b/drivers/memory/tegra/tegra20-emc.c
@@ -540,7 +540,7 @@ static int emc_read_lpddr_mode_register(struct tegra_emc *emc,
unsigned int register_addr,
unsigned int *register_data)
{
- u32 memory_dev = emem_dev + 1;
+ u32 memory_dev = emem_dev ? 1 : 2;
u32 val, mr_mask = 0xff;
int err;
diff --git a/drivers/memory/tegra/tegra210-emc-core.c b/drivers/memory/tegra/tegra210-emc-core.c
index 13584f9317a4..cbe1a7723514 100644
--- a/drivers/memory/tegra/tegra210-emc-core.c
+++ b/drivers/memory/tegra/tegra210-emc-core.c
@@ -711,7 +711,7 @@ static int tegra210_emc_cd_set_state(struct thermal_cooling_device *cd,
return 0;
}
-static struct thermal_cooling_device_ops tegra210_emc_cd_ops = {
+static const struct thermal_cooling_device_ops tegra210_emc_cd_ops = {
.get_max_state = tegra210_emc_cd_max_state,
.get_cur_state = tegra210_emc_cd_get_state,
.set_cur_state = tegra210_emc_cd_set_state,
diff --git a/drivers/memory/tegra/tegra30-emc.c b/drivers/memory/tegra/tegra30-emc.c
index 80f98d717e13..9ba2a9e5316b 100644
--- a/drivers/memory/tegra/tegra30-emc.c
+++ b/drivers/memory/tegra/tegra30-emc.c
@@ -9,6 +9,7 @@
* Copyright (C) 2019 GRATE-DRIVER project
*/
+#include <linux/bitfield.h>
#include <linux/clk.h>
#include <linux/clk/tegra.h>
#include <linux/debugfs.h>
@@ -31,11 +32,15 @@
#include <soc/tegra/common.h>
#include <soc/tegra/fuse.h>
+#include "../jedec_ddr.h"
+#include "../of_memory.h"
+
#include "mc.h"
#define EMC_INTSTATUS 0x000
#define EMC_INTMASK 0x004
#define EMC_DBG 0x008
+#define EMC_ADR_CFG 0x010
#define EMC_CFG 0x00c
#define EMC_REFCTRL 0x020
#define EMC_TIMING_CONTROL 0x028
@@ -81,6 +86,7 @@
#define EMC_EMRS 0x0d0
#define EMC_SELF_REF 0x0e0
#define EMC_MRW 0x0e8
+#define EMC_MRR 0x0ec
#define EMC_XM2DQSPADCTRL3 0x0f8
#define EMC_FBIO_SPARE 0x100
#define EMC_FBIO_CFG5 0x104
@@ -208,6 +214,13 @@
#define EMC_REFRESH_OVERFLOW_INT BIT(3)
#define EMC_CLKCHANGE_COMPLETE_INT BIT(4)
+#define EMC_MRR_DIVLD_INT BIT(5)
+
+#define EMC_MRR_DEV_SELECTN GENMASK(31, 30)
+#define EMC_MRR_MRR_MA GENMASK(23, 16)
+#define EMC_MRR_MRR_DATA GENMASK(15, 0)
+
+#define EMC_ADR_CFG_EMEM_NUMDEV BIT(0)
enum emc_dram_type {
DRAM_TYPE_DDR3,
@@ -378,6 +391,8 @@ struct tegra_emc {
/* protect shared rate-change code path */
struct mutex rate_lock;
+
+ bool mrr_error;
};
static int emc_seq_update_timing(struct tegra_emc *emc)
@@ -1008,12 +1023,18 @@ static int emc_load_timings_from_dt(struct tegra_emc *emc,
return 0;
}
-static struct device_node *emc_find_node_by_ram_code(struct device *dev)
+static struct device_node *emc_find_node_by_ram_code(struct tegra_emc *emc)
{
+ struct device *dev = emc->dev;
struct device_node *np;
u32 value, ram_code;
int err;
+ if (emc->mrr_error) {
+ dev_warn(dev, "memory timings skipped due to MRR error\n");
+ return NULL;
+ }
+
if (of_get_child_count(dev->of_node) == 0) {
dev_info_once(dev, "device-tree doesn't have memory timings\n");
return NULL;
@@ -1035,11 +1056,73 @@ static struct device_node *emc_find_node_by_ram_code(struct device *dev)
return NULL;
}
+static int emc_read_lpddr_mode_register(struct tegra_emc *emc,
+ unsigned int emem_dev,
+ unsigned int register_addr,
+ unsigned int *register_data)
+{
+ u32 memory_dev = emem_dev ? 1 : 2;
+ u32 val, mr_mask = 0xff;
+ int err;
+
+ /* clear data-valid interrupt status */
+ writel_relaxed(EMC_MRR_DIVLD_INT, emc->regs + EMC_INTSTATUS);
+
+ /* issue mode register read request */
+ val = FIELD_PREP(EMC_MRR_DEV_SELECTN, memory_dev);
+ val |= FIELD_PREP(EMC_MRR_MRR_MA, register_addr);
+
+ writel_relaxed(val, emc->regs + EMC_MRR);
+
+ /* wait for the LPDDR2 data-valid interrupt */
+ err = readl_relaxed_poll_timeout_atomic(emc->regs + EMC_INTSTATUS, val,
+ val & EMC_MRR_DIVLD_INT,
+ 1, 100);
+ if (err) {
+ dev_err(emc->dev, "mode register %u read failed: %d\n",
+ register_addr, err);
+ emc->mrr_error = true;
+ return err;
+ }
+
+ /* read out mode register data */
+ val = readl_relaxed(emc->regs + EMC_MRR);
+ *register_data = FIELD_GET(EMC_MRR_MRR_DATA, val) & mr_mask;
+
+ return 0;
+}
+
+static void emc_read_lpddr_sdram_info(struct tegra_emc *emc,
+ unsigned int emem_dev)
+{
+ union lpddr2_basic_config4 basic_conf4;
+ unsigned int manufacturer_id;
+ unsigned int revision_id1;
+ unsigned int revision_id2;
+
+ /* these registers are standard for all LPDDR JEDEC memory chips */
+ emc_read_lpddr_mode_register(emc, emem_dev, 5, &manufacturer_id);
+ emc_read_lpddr_mode_register(emc, emem_dev, 6, &revision_id1);
+ emc_read_lpddr_mode_register(emc, emem_dev, 7, &revision_id2);
+ emc_read_lpddr_mode_register(emc, emem_dev, 8, &basic_conf4.value);
+
+ dev_info(emc->dev, "SDRAM[dev%u]: manufacturer: 0x%x (%s) rev1: 0x%x rev2: 0x%x prefetch: S%u density: %uMbit iowidth: %ubit\n",
+ emem_dev, manufacturer_id,
+ lpddr2_jedec_manufacturer(manufacturer_id),
+ revision_id1, revision_id2,
+ 4 >> basic_conf4.arch_type,
+ 64 << basic_conf4.density,
+ 32 >> basic_conf4.io_width);
+}
+
static int emc_setup_hw(struct tegra_emc *emc)
{
+ u32 fbio_cfg5, emc_cfg, emc_dbg, emc_adr_cfg;
u32 intmask = EMC_REFRESH_OVERFLOW_INT;
- u32 fbio_cfg5, emc_cfg, emc_dbg;
+ static bool print_sdram_info_once;
enum emc_dram_type dram_type;
+ const char *dram_type_str;
+ unsigned int emem_numdev;
fbio_cfg5 = readl_relaxed(emc->regs + EMC_FBIO_CFG5);
dram_type = fbio_cfg5 & EMC_FBIO_CFG5_DRAM_TYPE_MASK;
@@ -1076,6 +1159,34 @@ static int emc_setup_hw(struct tegra_emc *emc)
emc_dbg &= ~EMC_DBG_FORCE_UPDATE;
writel_relaxed(emc_dbg, emc->regs + EMC_DBG);
+ switch (dram_type) {
+ case DRAM_TYPE_DDR1:
+ dram_type_str = "DDR1";
+ break;
+ case DRAM_TYPE_LPDDR2:
+ dram_type_str = "LPDDR2";
+ break;
+ case DRAM_TYPE_DDR2:
+ dram_type_str = "DDR2";
+ break;
+ case DRAM_TYPE_DDR3:
+ dram_type_str = "DDR3";
+ break;
+ }
+
+ emc_adr_cfg = readl_relaxed(emc->regs + EMC_ADR_CFG);
+ emem_numdev = FIELD_GET(EMC_ADR_CFG_EMEM_NUMDEV, emc_adr_cfg) + 1;
+
+ dev_info_once(emc->dev, "%u %s %s attached\n", emem_numdev,
+ dram_type_str, emem_numdev == 2 ? "devices" : "device");
+
+ if (dram_type == DRAM_TYPE_LPDDR2 && !print_sdram_info_once) {
+ while (emem_numdev--)
+ emc_read_lpddr_sdram_info(emc, emem_numdev);
+
+ print_sdram_info_once = true;
+ }
+
return 0;
}
@@ -1538,14 +1649,6 @@ static int tegra_emc_probe(struct platform_device *pdev)
emc->clk_nb.notifier_call = emc_clk_change_notify;
emc->dev = &pdev->dev;
- np = emc_find_node_by_ram_code(&pdev->dev);
- if (np) {
- err = emc_load_timings_from_dt(emc, np);
- of_node_put(np);
- if (err)
- return err;
- }
-
emc->regs = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(emc->regs))
return PTR_ERR(emc->regs);
@@ -1554,6 +1657,14 @@ static int tegra_emc_probe(struct platform_device *pdev)
if (err)
return err;
+ np = emc_find_node_by_ram_code(emc);
+ if (np) {
+ err = emc_load_timings_from_dt(emc, np);
+ of_node_put(np);
+ if (err)
+ return err;
+ }
+
err = platform_get_irq(pdev, 0);
if (err < 0)
return err;