Merge tag 'qcom-drivers-for-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers

Qualcomm driver updates for v5.10

Replace the busy wait for free tcs slots in the RPMh driver with a
sleeping wait and use memory barriers when writing the command registers.

Add a bunch of SoC ids to the socinfo driver, fix an erro printin the
apr driver and migrate llcc to devm_platform_ioremap_resource_byname().

* tag 'qcom-drivers-for-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  soc: qcom: llcc: use devm_platform_ioremap_resource_byname()
  soc: qcom: apr: Fixup the error displayed on lookup failure
  soc: qcom: socinfo: Add msm8992/4 and apq8094 SoC IDs
  soc: qcom: rpmh-rsc: Sleep waiting for tcs slots to be free
  soc: qcom-geni-se: Don't use relaxed writes when writing commands
  soc: qcom: socinfo: add SC7180 entry to soc_id array
  soc: qcom: socinfo: add soc id for IPQ6018

Link: https://lore.kernel.org/r/20200924040504.179708-1-bjorn.andersson@linaro.org
Signed-off-by: Olof Johansson <olof@lixom.net>

5 files changed, 65 insertions, 68 deletions

diff --git a/drivers/soc/qcom/apr.c b/drivers/soc/qcom/apr.c
index 1f35b097c635..7abfc8c4fdc7 100644
--- a/drivers/soc/qcom/apr.c
+++ b/drivers/soc/qcom/apr.c
@@ -328,7 +328,7 @@ static int of_apr_add_pd_lookups(struct device *dev)
 
 		pds = pdr_add_lookup(apr->pdr, service_name, service_path);
 		if (IS_ERR(pds) && PTR_ERR(pds) != -EALREADY) {
-			dev_err(dev, "pdr add lookup failed: %d\n", ret);
+			dev_err(dev, "pdr add lookup failed: %ld\n", PTR_ERR(pds));
 			return PTR_ERR(pds);
 		}
 	}
diff --git a/drivers/soc/qcom/llcc-qcom.c b/drivers/soc/qcom/llcc-qcom.c
index 429b5a60a1ba..70fbe70c6213 100644
--- a/drivers/soc/qcom/llcc-qcom.c
+++ b/drivers/soc/qcom/llcc-qcom.c
@@ -387,7 +387,6 @@ static int qcom_llcc_remove(struct platform_device *pdev)
 static struct regmap *qcom_llcc_init_mmio(struct platform_device *pdev,
 		const char *name)
 {
-	struct resource *res;
 	void __iomem *base;
 	struct regmap_config llcc_regmap_config = {
 		.reg_bits = 32,
@@ -396,11 +395,7 @@ static struct regmap *qcom_llcc_init_mmio(struct platform_device *pdev,
 		.fast_io = true,
 	};
 
-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, name);
-	if (!res)
-		return ERR_PTR(-ENODEV);
-
-	base = devm_ioremap_resource(&pdev->dev, res);
+	base = devm_platform_ioremap_resource_byname(pdev, name);
 	if (IS_ERR(base))
 		return ERR_CAST(base);
 
diff --git a/drivers/soc/qcom/rpmh-internal.h b/drivers/soc/qcom/rpmh-internal.h
index ef60e790a750..344ba687c13b 100644
--- a/drivers/soc/qcom/rpmh-internal.h
+++ b/drivers/soc/qcom/rpmh-internal.h
@@ -8,6 +8,7 @@
 #define __RPM_INTERNAL_H__
 
 #include <linux/bitmap.h>
+#include <linux/wait.h>
 #include <soc/qcom/tcs.h>
 
 #define TCS_TYPE_NR			4
@@ -106,6 +107,8 @@ struct rpmh_ctrlr {
  * @lock:               Synchronize state of the controller.  If RPMH's cache
  *                      lock will also be held, the order is: drv->lock then
  *                      cache_lock.
+ * @tcs_wait:           Wait queue used to wait for @tcs_in_use to free up a
+ *                      slot
  * @client:             Handle to the DRV's client.
  */
 struct rsc_drv {
@@ -118,6 +121,7 @@ struct rsc_drv {
 	struct tcs_group tcs[TCS_TYPE_NR];
 	DECLARE_BITMAP(tcs_in_use, MAX_TCS_NR);
 	spinlock_t lock;
+	wait_queue_head_t tcs_wait;
 	struct rpmh_ctrlr client;
 };
 
diff --git a/drivers/soc/qcom/rpmh-rsc.c b/drivers/soc/qcom/rpmh-rsc.c
index ae6675782581..a297911afe57 100644
--- a/drivers/soc/qcom/rpmh-rsc.c
+++ b/drivers/soc/qcom/rpmh-rsc.c
@@ -19,6 +19,7 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
+#include <linux/wait.h>
 
 #include <soc/qcom/cmd-db.h>
 #include <soc/qcom/tcs.h>
@@ -453,6 +454,7 @@ skip:
 		if (!drv->tcs[ACTIVE_TCS].num_tcs)
 			enable_tcs_irq(drv, i, false);
 		spin_unlock(&drv->lock);
+		wake_up(&drv->tcs_wait);
 		if (req)
 			rpmh_tx_done(req, err);
 	}
@@ -571,73 +573,34 @@ static int find_free_tcs(struct tcs_group *tcs)
 }
 
 /**
- * tcs_write() - Store messages into a TCS right now, or return -EBUSY.
+ * claim_tcs_for_req() - Claim a tcs in the given tcs_group; only for active.
  * @drv: The controller.
+ * @tcs: The tcs_group used for ACTIVE_ONLY transfers.
  * @msg: The data to be sent.
  *
- * Grabs a TCS for ACTIVE_ONLY transfers and writes the messages to it.
+ * Claims a tcs in the given tcs_group while making sure that no existing cmd
+ * is in flight that would conflict with the one in @msg.
  *
- * If there are no free TCSes for ACTIVE_ONLY transfers or if a command for
- * the same address is already transferring returns -EBUSY which means the
- * client should retry shortly.
+ * Context: Must be called with the drv->lock held since that protects
+ * tcs_in_use.
  *
- * Return: 0 on success, -EBUSY if client should retry, or an error.
- *         Client should have interrupts enabled for a bit before retrying.
+ * Return: The id of the claimed tcs or -EBUSY if a matching msg is in flight
+ * or the tcs_group is full.
  */
-static int tcs_write(struct rsc_drv *drv, const struct tcs_request *msg)
+static int claim_tcs_for_req(struct rsc_drv *drv, struct tcs_group *tcs,
+			     const struct tcs_request *msg)
 {
-	struct tcs_group *tcs;
-	int tcs_id;
-	unsigned long flags;
 	int ret;
 
-	tcs = get_tcs_for_msg(drv, msg);
-	if (IS_ERR(tcs))
-		return PTR_ERR(tcs);
-
-	spin_lock_irqsave(&drv->lock, flags);
 	/*
 	 * The h/w does not like if we send a request to the same address,
 	 * when one is already in-flight or being processed.
 	 */
 	ret = check_for_req_inflight(drv, tcs, msg);
 	if (ret)
-		goto unlock;
-
-	ret = find_free_tcs(tcs);
-	if (ret < 0)
-		goto unlock;
-	tcs_id = ret;
-
-	tcs->req[tcs_id - tcs->offset] = msg;
-	set_bit(tcs_id, drv->tcs_in_use);
-	if (msg->state == RPMH_ACTIVE_ONLY_STATE && tcs->type != ACTIVE_TCS) {
-		/*
-		 * Clear previously programmed WAKE commands in selected
-		 * repurposed TCS to avoid triggering them. tcs->slots will be
-		 * cleaned from rpmh_flush() by invoking rpmh_rsc_invalidate()
-		 */
-		write_tcs_reg_sync(drv, RSC_DRV_CMD_ENABLE, tcs_id, 0);
-		write_tcs_reg_sync(drv, RSC_DRV_CMD_WAIT_FOR_CMPL, tcs_id, 0);
-		enable_tcs_irq(drv, tcs_id, true);
-	}
-	spin_unlock_irqrestore(&drv->lock, flags);
-
-	/*
-	 * These two can be done after the lock is released because:
-	 * - We marked "tcs_in_use" under lock.
-	 * - Once "tcs_in_use" has been marked nobody else could be writing
-	 *   to these registers until the interrupt goes off.
-	 * - The interrupt can't go off until we trigger w/ the last line
-	 *   of __tcs_set_trigger() below.
-	 */
-	__tcs_buffer_write(drv, tcs_id, 0, msg);
-	__tcs_set_trigger(drv, tcs_id, true);
+		return ret;
 
-	return 0;
-unlock:
-	spin_unlock_irqrestore(&drv->lock, flags);
-	return ret;
+	return find_free_tcs(tcs);
 }
 
 /**
@@ -664,18 +627,47 @@ unlock:
  */
 int rpmh_rsc_send_data(struct rsc_drv *drv, const struct tcs_request *msg)
 {
-	int ret;
+	struct tcs_group *tcs;
+	int tcs_id;
+	unsigned long flags;
 
-	do {
-		ret = tcs_write(drv, msg);
-		if (ret == -EBUSY) {
-			pr_info_ratelimited("TCS Busy, retrying RPMH message send: addr=%#x\n",
-					    msg->cmds[0].addr);
-			udelay(10);
-		}
-	} while (ret == -EBUSY);
+	tcs = get_tcs_for_msg(drv, msg);
+	if (IS_ERR(tcs))
+		return PTR_ERR(tcs);
 
-	return ret;
+	spin_lock_irqsave(&drv->lock, flags);
+
+	/* Wait forever for a free tcs. It better be there eventually! */
+	wait_event_lock_irq(drv->tcs_wait,
+			    (tcs_id = claim_tcs_for_req(drv, tcs, msg)) >= 0,
+			    drv->lock);
+
+	tcs->req[tcs_id - tcs->offset] = msg;
+	set_bit(tcs_id, drv->tcs_in_use);
+	if (msg->state == RPMH_ACTIVE_ONLY_STATE && tcs->type != ACTIVE_TCS) {
+		/*
+		 * Clear previously programmed WAKE commands in selected
+		 * repurposed TCS to avoid triggering them. tcs->slots will be
+		 * cleaned from rpmh_flush() by invoking rpmh_rsc_invalidate()
+		 */
+		write_tcs_reg_sync(drv, RSC_DRV_CMD_ENABLE, tcs_id, 0);
+		write_tcs_reg_sync(drv, RSC_DRV_CMD_WAIT_FOR_CMPL, tcs_id, 0);
+		enable_tcs_irq(drv, tcs_id, true);
+	}
+	spin_unlock_irqrestore(&drv->lock, flags);
+
+	/*
+	 * These two can be done after the lock is released because:
+	 * - We marked "tcs_in_use" under lock.
+	 * - Once "tcs_in_use" has been marked nobody else could be writing
+	 *   to these registers until the interrupt goes off.
+	 * - The interrupt can't go off until we trigger w/ the last line
+	 *   of __tcs_set_trigger() below.
+	 */
+	__tcs_buffer_write(drv, tcs_id, 0, msg);
+	__tcs_set_trigger(drv, tcs_id, true);
+
+	return 0;
 }
 
 /**
@@ -983,6 +975,7 @@ static int rpmh_rsc_probe(struct platform_device *pdev)
 		return ret;
 
 	spin_lock_init(&drv->lock);
+	init_waitqueue_head(&drv->tcs_wait);
 	bitmap_zero(drv->tcs_in_use, MAX_TCS_NR);
 
 	irq = platform_get_irq(pdev, drv->id);
diff --git a/drivers/soc/qcom/socinfo.c b/drivers/soc/qcom/socinfo.c
index e19102f46302..0102bf254a9e 100644
--- a/drivers/soc/qcom/socinfo.c
+++ b/drivers/soc/qcom/socinfo.c
@@ -194,6 +194,7 @@ static const struct soc_id soc_id[] = {
 	{ 186, "MSM8674" },
 	{ 194, "MSM8974PRO" },
 	{ 206, "MSM8916" },
+	{ 207, "MSM8994" },
 	{ 208, "APQ8074-AA" },
 	{ 209, "APQ8074-AB" },
 	{ 210, "APQ8074PRO" },
@@ -214,6 +215,8 @@ static const struct soc_id soc_id[] = {
 	{ 248, "MSM8216" },
 	{ 249, "MSM8116" },
 	{ 250, "MSM8616" },
+	{ 251, "MSM8992" },
+	{ 253, "APQ8094" },
 	{ 291, "APQ8096" },
 	{ 305, "MSM8996SG" },
 	{ 310, "MSM8996AU" },
@@ -223,6 +226,8 @@ static const struct soc_id soc_id[] = {
 	{ 321, "SDM845" },
 	{ 341, "SDA845" },
 	{ 356, "SM8250" },
+	{ 402, "IPQ6018" },
+	{ 425, "SC7180" },
 };
 
 static const char *socinfo_machine(struct device *dev, unsigned int id)