diff options
author | Hans de Goede <hdegoede@redhat.com> | 2021-08-19 21:05:43 +0200 |
---|---|---|
committer | Mark Brown <broonie@kernel.org> | 2021-08-19 23:28:00 +0100 |
commit | 9ba00856686ade106afee2884b5e8ac1e09d137a (patch) | |
tree | 715f1959ef215e3adf88442a712c5d596af1721e /sound | |
parent | 0a61bcbba8737fe6d43dc34070ffa84a2f12e990 (diff) | |
download | linux-stable-9ba00856686ade106afee2884b5e8ac1e09d137a.tar.gz linux-stable-9ba00856686ade106afee2884b5e8ac1e09d137a.tar.bz2 linux-stable-9ba00856686ade106afee2884b5e8ac1e09d137a.zip |
ASoC: Intel: bytcr_rt5640: Add support for HP Elite Pad 1000G2 jack-detect
The HP Elitepad 1000 G2 tablet has 2 headset jacks:
1. on the dock which uses the output of the codecs built-in HP-amp +
the standard IN2 input which is always used with the headset-jack.
2. on the tablet itself, this uses the line-out of the codec + an external
HP-amp, which gets enabled by the ALC5642 codec's GPIO1 pin; and IN1 for
the headset-mic.
The codec's GPIO1 is also its only IRQ output pin, so this means that
the codec's IRQ cannot be used on this tablet. Instead the jack-detect
is connected directly to GPIOs on the main SoC. The dock has a helper
chip which also detects if a headset-mic is present or not, so there
are 2 GPIOs for the jack-detect status of the dock. The tablet jack
uses a single GPIO which indicates if a jack is present or not.
Differentiating between headphones vs a headset on the tablet jack
is done by using the usual mic-bias over-current-detection mechanism.
Add support for this unique setup, this support gets enabled on this
tablet through a new BYT_RT5640_JD_HP_ELITEP_1000G2 quirk.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213415
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210819190543.784415-7-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'sound')
-rw-r--r-- | sound/soc/intel/boards/bytcr_rt5640.c | 146 |
1 files changed, 144 insertions, 2 deletions
diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index 3c5ca97f22a9..2f151ba80be5 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -18,6 +18,8 @@ #include <linux/clk.h> #include <linux/device.h> #include <linux/dmi.h> +#include <linux/gpio/consumer.h> +#include <linux/gpio/machine.h> #include <linux/input.h> #include <linux/slab.h> #include <sound/pcm.h> @@ -76,6 +78,7 @@ enum { #define BYT_RT5640_LINEOUT BIT(25) #define BYT_RT5640_LINEOUT_AS_HP2 BIT(26) #define BYT_RT5640_HSMIC2_ON_IN1 BIT(27) +#define BYT_RT5640_JD_HP_ELITEP_1000G2 BIT(28) #define BYTCR_INPUT_DEFAULTS \ (BYT_RT5640_IN3_MAP | \ @@ -89,6 +92,8 @@ enum { struct byt_rt5640_private { struct snd_soc_jack jack; + struct snd_soc_jack jack2; + struct gpio_desc *hsmic_detect; struct clk *mclk; struct device *codec_dev; }; @@ -141,6 +146,8 @@ static void log_quirks(struct device *dev) } if (byt_rt5640_quirk & BYT_RT5640_JD_NOT_INV) dev_info(dev, "quirk JD_NOT_INV enabled\n"); + if (byt_rt5640_quirk & BYT_RT5640_JD_HP_ELITEP_1000G2) + dev_info(dev, "quirk JD_HP_ELITEPAD_1000G2 enabled\n"); if (byt_rt5640_quirk & BYT_RT5640_MONO_SPEAKER) dev_info(dev, "quirk MONO_SPEAKER enabled\n"); if (byt_rt5640_quirk & BYT_RT5640_NO_SPEAKERS) @@ -446,6 +453,75 @@ static struct snd_soc_jack_pin rt5640_pins[] = { }, }; +static struct snd_soc_jack_pin rt5640_pins2[] = { + { + /* The 2nd headset jack uses lineout with an external HP-amp */ + .pin = "Line Out", + .mask = SND_JACK_HEADPHONE, + }, + { + .pin = "Headset Mic 2", + .mask = SND_JACK_MICROPHONE, + }, +}; + +struct snd_soc_jack_gpio rt5640_jack_gpio = { + .name = "hp-detect", + .report = SND_JACK_HEADSET, + .invert = true, + .debounce_time = 200, +}; + +struct snd_soc_jack_gpio rt5640_jack2_gpio = { + .name = "hp2-detect", + .report = SND_JACK_HEADSET, + .invert = true, + .debounce_time = 200, +}; + +static const struct acpi_gpio_params acpi_gpio0 = { 0, 0, false }; +static const struct acpi_gpio_params acpi_gpio1 = { 1, 0, false }; +static const struct acpi_gpio_params acpi_gpio2 = { 2, 0, false }; + +static const struct acpi_gpio_mapping byt_rt5640_hp_elitepad_1000g2_gpios[] = { + { "hp-detect-gpios", &acpi_gpio0, 1, }, + { "headset-mic-detect-gpios", &acpi_gpio1, 1, }, + { "hp2-detect-gpios", &acpi_gpio2, 1, }, + { }, +}; + +int byt_rt5640_hp_elitepad_1000g2_jack1_check(void *data) +{ + struct byt_rt5640_private *priv = data; + int jack_status, mic_status; + + jack_status = gpiod_get_value_cansleep(rt5640_jack_gpio.desc); + if (jack_status) + return 0; + + mic_status = gpiod_get_value_cansleep(priv->hsmic_detect); + if (mic_status) + return SND_JACK_HEADPHONE; + else + return SND_JACK_HEADSET; +} + +int byt_rt5640_hp_elitepad_1000g2_jack2_check(void *data) +{ + struct snd_soc_component *component = data; + int jack_status, report; + + jack_status = gpiod_get_value_cansleep(rt5640_jack2_gpio.desc); + if (jack_status) + return 0; + + rt5640_enable_micbias1_for_ovcd(component); + report = rt5640_detect_headset(component, rt5640_jack2_gpio.desc); + rt5640_disable_micbias1_for_ovcd(component); + + return report; +} + static int byt_rt5640_aif1_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) { @@ -657,7 +733,8 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { BYT_RT5640_MCLK_EN | BYT_RT5640_LINEOUT | BYT_RT5640_LINEOUT_AS_HP2 | - BYT_RT5640_HSMIC2_ON_IN1), + BYT_RT5640_HSMIC2_ON_IN1 | + BYT_RT5640_JD_HP_ELITEP_1000G2), }, { /* HP Pavilion x2 10-k0XX, 10-n0XX */ .matches = { @@ -1180,9 +1257,53 @@ static int byt_rt5640_init(struct snd_soc_pcm_runtime *runtime) snd_soc_component_set_jack(component, &priv->jack, NULL); } + if (byt_rt5640_quirk & BYT_RT5640_JD_HP_ELITEP_1000G2) { + ret = snd_soc_card_jack_new(card, "Headset", + SND_JACK_HEADSET, + &priv->jack, rt5640_pins, + ARRAY_SIZE(rt5640_pins)); + if (ret) + return ret; + + ret = snd_soc_card_jack_new(card, "Headset 2", + SND_JACK_HEADSET, + &priv->jack2, rt5640_pins2, + ARRAY_SIZE(rt5640_pins2)); + if (ret) + return ret; + + rt5640_jack_gpio.data = priv; + rt5640_jack_gpio.gpiod_dev = priv->codec_dev; + rt5640_jack_gpio.jack_status_check = byt_rt5640_hp_elitepad_1000g2_jack1_check; + ret = snd_soc_jack_add_gpios(&priv->jack, 1, &rt5640_jack_gpio); + if (ret) + return ret; + + rt5640_set_ovcd_params(component); + rt5640_jack2_gpio.data = component; + rt5640_jack2_gpio.gpiod_dev = priv->codec_dev; + rt5640_jack2_gpio.jack_status_check = byt_rt5640_hp_elitepad_1000g2_jack2_check; + ret = snd_soc_jack_add_gpios(&priv->jack2, 1, &rt5640_jack2_gpio); + if (ret) { + snd_soc_jack_free_gpios(&priv->jack, 1, &rt5640_jack_gpio); + return ret; + } + } + return 0; } +static void byt_rt5640_exit(struct snd_soc_pcm_runtime *runtime) +{ + struct snd_soc_card *card = runtime->card; + struct byt_rt5640_private *priv = snd_soc_card_get_drvdata(card); + + if (byt_rt5640_quirk & BYT_RT5640_JD_HP_ELITEP_1000G2) { + snd_soc_jack_free_gpios(&priv->jack2, 1, &rt5640_jack2_gpio); + snd_soc_jack_free_gpios(&priv->jack, 1, &rt5640_jack_gpio); + } +} + static int byt_rt5640_codec_fixup(struct snd_soc_pcm_runtime *rtd, struct snd_pcm_hw_params *params) { @@ -1295,6 +1416,7 @@ static struct snd_soc_dai_link byt_rt5640_dais[] = { .dpcm_playback = 1, .dpcm_capture = 1, .init = byt_rt5640_init, + .exit = byt_rt5640_exit, .ops = &byt_rt5640_be_ssp2_ops, SND_SOC_DAILINK_REG(ssp2_port, ssp2_codec, platform), }, @@ -1498,10 +1620,24 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev) return -EPROBE_DEFER; priv->codec_dev = get_device(codec_dev); + if (byt_rt5640_quirk & BYT_RT5640_JD_HP_ELITEP_1000G2) { + acpi_dev_add_driver_gpios(ACPI_COMPANION(priv->codec_dev), + byt_rt5640_hp_elitepad_1000g2_gpios); + + priv->hsmic_detect = devm_fwnode_gpiod_get(&pdev->dev, codec_dev->fwnode, + "headset-mic-detect", GPIOD_IN, + "headset-mic-detect"); + if (IS_ERR(priv->hsmic_detect)) { + ret_val = PTR_ERR(priv->hsmic_detect); + dev_err_probe(&pdev->dev, ret_val, "getting hsmic-detect GPIO\n"); + goto err_device; + } + } + /* Must be called before register_card, also see declaration comment. */ ret_val = byt_rt5640_add_codec_device_props(codec_dev, priv); if (ret_val) - goto err_device; + goto err_remove_gpios; log_quirks(&pdev->dev); @@ -1605,6 +1741,9 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev) err: device_remove_software_node(priv->codec_dev); +err_remove_gpios: + if (byt_rt5640_quirk & BYT_RT5640_JD_HP_ELITEP_1000G2) + acpi_dev_remove_driver_gpios(ACPI_COMPANION(priv->codec_dev)); err_device: put_device(priv->codec_dev); return ret_val; @@ -1615,6 +1754,9 @@ static int snd_byt_rt5640_mc_remove(struct platform_device *pdev) struct snd_soc_card *card = platform_get_drvdata(pdev); struct byt_rt5640_private *priv = snd_soc_card_get_drvdata(card); + if (byt_rt5640_quirk & BYT_RT5640_JD_HP_ELITEP_1000G2) + acpi_dev_remove_driver_gpios(ACPI_COMPANION(priv->codec_dev)); + device_remove_software_node(priv->codec_dev); put_device(priv->codec_dev); return 0; |