diff options
| -rw-r--r-- | drivers/tty/serial/8250/8250_core.c | 1 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_port.c | 1 | ||||
| -rw-r--r-- | drivers/tty/serial/Makefile | 3 | ||||
| -rw-r--r-- | drivers/tty/serial/serial_base.h | 46 | ||||
| -rw-r--r-- | drivers/tty/serial/serial_base_bus.c | 200 | ||||
| -rw-r--r-- | drivers/tty/serial/serial_core.c | 192 | ||||
| -rw-r--r-- | drivers/tty/serial/serial_ctrl.c | 68 | ||||
| -rw-r--r-- | drivers/tty/serial/serial_port.c | 105 | ||||
| -rw-r--r-- | include/linux/serial_core.h | 5 |
9 files changed, 598 insertions, 23 deletions
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index 4434c3256a92..914e0e6251bf 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -1039,6 +1039,7 @@ int serial8250_register_8250_port(const struct uart_8250_port *up) if (uart->port.dev) uart_remove_one_port(&serial8250_reg, &uart->port); + uart->port.ctrl_id = up->port.ctrl_id; uart->port.iobase = up->port.iobase; uart->port.membase = up->port.membase; uart->port.irq = up->port.irq; diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 1321bb42a074..dfb51a854e77 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -3282,6 +3282,7 @@ void serial8250_init_port(struct uart_8250_port *up) struct uart_port *port = &up->port; spin_lock_init(&port->lock); + port->ctrl_id = 0; port->ops = &serial8250_pops; port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_8250_CONSOLE); diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile index 531ec3a19dae..4f7ab4150ec5 100644 --- a/drivers/tty/serial/Makefile +++ b/drivers/tty/serial/Makefile @@ -3,7 +3,8 @@ # Makefile for the kernel serial device drivers. # -obj-$(CONFIG_SERIAL_CORE) += serial_core.o +obj-$(CONFIG_SERIAL_CORE) += serial_base.o +serial_base-y := serial_core.o serial_base_bus.o serial_ctrl.o serial_port.o obj-$(CONFIG_SERIAL_EARLYCON) += earlycon.o obj-$(CONFIG_SERIAL_EARLYCON_SEMIHOST) += earlycon-semihost.o diff --git a/drivers/tty/serial/serial_base.h b/drivers/tty/serial/serial_base.h new file mode 100644 index 000000000000..9faac0ff6b89 --- /dev/null +++ b/drivers/tty/serial/serial_base.h @@ -0,0 +1,46 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Serial core related functions, serial port device drivers do not need this. + * + * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/ + * Author: Tony Lindgren <tony@atomide.com> + */ + +#define to_serial_base_ctrl_device(d) container_of((d), struct serial_ctrl_device, dev) +#define to_serial_base_port_device(d) container_of((d), struct serial_port_device, dev) + +struct uart_driver; +struct uart_port; +struct device_driver; +struct device; + +struct serial_ctrl_device { + struct device dev; +}; + +struct serial_port_device { + struct device dev; + struct uart_port *port; +}; + +int serial_base_ctrl_init(void); +void serial_base_ctrl_exit(void); + +int serial_base_port_init(void); +void serial_base_port_exit(void); + +int serial_base_driver_register(struct device_driver *driver); +void serial_base_driver_unregister(struct device_driver *driver); + +struct serial_ctrl_device *serial_base_ctrl_add(struct uart_port *port, + struct device *parent); +struct serial_port_device *serial_base_port_add(struct uart_port *port, + struct serial_ctrl_device *parent); +void serial_base_ctrl_device_remove(struct serial_ctrl_device *ctrl_dev); +void serial_base_port_device_remove(struct serial_port_device *port_dev); + +int serial_ctrl_register_port(struct uart_driver *drv, struct uart_port *port); +void serial_ctrl_unregister_port(struct uart_driver *drv, struct uart_port *port); + +int serial_core_register_port(struct uart_driver *drv, struct uart_port *port); +void serial_core_unregister_port(struct uart_driver *drv, struct uart_port *port); diff --git a/drivers/tty/serial/serial_base_bus.c b/drivers/tty/serial/serial_base_bus.c new file mode 100644 index 000000000000..1b37833b8f66 --- /dev/null +++ b/drivers/tty/serial/serial_base_bus.c @@ -0,0 +1,200 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Serial base bus layer for controllers + * + * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/ + * Author: Tony Lindgren <tony@atomide.com> + * + * The serial core bus manages the serial core controller instances. + */ + +#include <linux/container_of.h> +#include <linux/device.h> +#include <linux/module.h> +#include <linux/serial_core.h> +#include <linux/slab.h> +#include <linux/spinlock.h> + +#include "serial_base.h" + +static int serial_base_match(struct device *dev, struct device_driver *drv) +{ + int len = strlen(drv->name); + + return !strncmp(dev_name(dev), drv->name, len); +} + +static struct bus_type serial_base_bus_type = { + .name = "serial-base", + .match = serial_base_match, +}; + +int serial_base_driver_register(struct device_driver *driver) +{ + driver->bus = &serial_base_bus_type; + + return driver_register(driver); +} + +void serial_base_driver_unregister(struct device_driver *driver) +{ + driver_unregister(driver); +} + +static int serial_base_device_init(struct uart_port *port, + struct device *dev, + struct device *parent_dev, + const struct device_type *type, + void (*release)(struct device *dev), + int id) +{ + device_initialize(dev); + dev->type = type; + dev->parent = parent_dev; + dev->bus = &serial_base_bus_type; + dev->release = release; + + return dev_set_name(dev, "%s.%s.%d", type->name, dev_name(port->dev), id); +} + +static const struct device_type serial_ctrl_type = { + .name = "ctrl", +}; + +static void serial_base_ctrl_release(struct device *dev) +{ + struct serial_ctrl_device *ctrl_dev = to_serial_base_ctrl_device(dev); + + kfree(ctrl_dev); +} + +void serial_base_ctrl_device_remove(struct serial_ctrl_device *ctrl_dev) +{ + if (!ctrl_dev) + return; + + device_del(&ctrl_dev->dev); +} + +struct serial_ctrl_device *serial_base_ctrl_add(struct uart_port *port, + struct device *parent) +{ + struct serial_ctrl_device *ctrl_dev; + int err; + + ctrl_dev = kzalloc(sizeof(*ctrl_dev), GFP_KERNEL); + if (!ctrl_dev) + return ERR_PTR(-ENOMEM); + + err = serial_base_device_init(port, &ctrl_dev->dev, + parent, &serial_ctrl_type, + serial_base_ctrl_release, + port->ctrl_id); + if (err) + goto err_free_ctrl_dev; + + err = device_add(&ctrl_dev->dev); + if (err) + goto err_put_device; + + return ctrl_dev; + +err_put_device: + put_device(&ctrl_dev->dev); +err_free_ctrl_dev: + kfree(ctrl_dev); + + return ERR_PTR(err); +} + +static const struct device_type serial_port_type = { + .name = "port", +}; + +static void serial_base_port_release(struct device *dev) +{ + struct serial_port_device *port_dev = to_serial_base_port_device(dev); + + kfree(port_dev); +} + +struct serial_port_device *serial_base_port_add(struct uart_port *port, + struct serial_ctrl_device *ctrl_dev) +{ + struct serial_port_device *port_dev; + int err; + + port_dev = kzalloc(sizeof(*port_dev), GFP_KERNEL); + if (!port_dev) + return ERR_PTR(-ENOMEM); + + err = serial_base_device_init(port, &port_dev->dev, + &ctrl_dev->dev, &serial_port_type, + serial_base_port_release, + port->line); + if (err) + goto err_free_port_dev; + + port_dev->port = port; + + err = device_add(&port_dev->dev); + if (err) + goto err_put_device; + + return port_dev; + +err_put_device: + put_device(&port_dev->dev); +err_free_port_dev: + kfree(port_dev); + + return ERR_PTR(err); +} + +void serial_base_port_device_remove(struct serial_port_device *port_dev) +{ + if (!port_dev) + return; + + device_del(&port_dev->dev); +} + +static int serial_base_init(void) +{ + int ret; + + ret = bus_register(&serial_base_bus_type); + if (ret) + return ret; + + ret = serial_base_ctrl_init(); + if (ret) + goto err_bus_unregister; + + ret = serial_base_port_init(); + if (ret) + goto err_ctrl_exit; + + return 0; + +err_ctrl_exit: + serial_base_ctrl_exit(); + +err_bus_unregister: + bus_unregister(&serial_base_bus_type); + + return ret; +} +module_init(serial_base_init); + +static void serial_base_exit(void) +{ + serial_base_port_exit(); + serial_base_ctrl_exit(); + bus_unregister(&serial_base_bus_type); +} +module_exit(serial_base_exit); + +MODULE_AUTHOR("Tony Lindgren <tony@atomide.com>"); +MODULE_DESCRIPTION("Serial core bus"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index f856c7fae2fd..29bd5ede0b25 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -17,6 +17,7 @@ #include <linux/gpio/consumer.h> #include <linux/kernel.h> #include <linux/of.h> +#include <linux/pm_runtime.h> #include <linux/proc_fs.h> #include <linux/seq_file.h> #include <linux/device.h> @@ -31,6 +32,8 @@ #include <linux/irq.h> #include <linux/uaccess.h> +#include "serial_base.h" + /* * This is used to lock changes in serial line configuration. */ @@ -134,9 +137,30 @@ static void __uart_start(struct tty_struct *tty) { struct uart_state *state = tty->driver_data; struct uart_port *port = state->uart_port; + struct serial_port_device *port_dev; + int err; + + if (!port || port->flags & UPF_DEAD || uart_tx_stopped(port)) + return; + + port_dev = port->port_dev; + + /* Increment the runtime PM usage count for the active check below */ + err = pm_runtime_get(&port_dev->dev); + if (err < 0) { + pm_runtime_put_noidle(&port_dev->dev); + return; + } - if (port && !(port->flags & UPF_DEAD) && !uart_tx_stopped(port)) + /* + * Start TX if enabled, and kick runtime PM. If the device is not + * enabled, serial_port_runtime_resume() calls start_tx() again + * after enabling the device. + */ + if (pm_runtime_active(&port_dev->dev)) port->ops->start_tx(port); + pm_runtime_mark_last_busy(&port_dev->dev); + pm_runtime_put_autosuspend(&port_dev->dev); } static void uart_start(struct tty_struct *tty) @@ -3048,7 +3072,7 @@ static const struct attribute_group tty_dev_attr_group = { }; /** - * uart_add_one_port - attach a driver-defined port structure + * serial_core_add_one_port - attach a driver-defined port structure * @drv: pointer to the uart low level driver structure for this port * @uport: uart port structure to use for this port. * @@ -3057,8 +3081,9 @@ static const struct attribute_group tty_dev_attr_group = { * This allows the driver @drv to register its own uart_port structure with the * core driver. The main purpose is to allow the low level uart drivers to * expand uart_port, rather than having yet more levels of structures. + * Caller must hold port_mutex. */ -int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport) +static int serial_core_add_one_port(struct uart_driver *drv, struct uart_port *uport) { struct uart_state *state; struct tty_port *port; @@ -3072,7 +3097,6 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport) state = drv->state + uport->line; port = &state->port; - mutex_lock(&port_mutex); mutex_lock(&port->mutex); if (state->uart_port) { ret = -EINVAL; @@ -3137,21 +3161,14 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport) uport->line); } - /* - * Ensure UPF_DEAD is not set. - */ - uport->flags &= ~UPF_DEAD; - out: mutex_unlock(&port->mutex); - mutex_unlock(&port_mutex); return ret; } -EXPORT_SYMBOL(uart_add_one_port); /** - * uart_remove_one_port - detach a driver defined port structure + * serial_core_remove_one_port - detach a driver defined port structure * @drv: pointer to the uart low level driver structure for this port * @uport: uart port structure for this port * @@ -3159,20 +3176,16 @@ EXPORT_SYMBOL(uart_add_one_port); * * This unhooks (and hangs up) the specified port structure from the core * driver. No further calls will be made to the low-level code for this port. + * Caller must hold port_mutex. */ -void uart_remove_one_port(struct uart_driver *drv, struct uart_port *uport) +static void serial_core_remove_one_port(struct uart_driver *drv, + struct uart_port *uport) { struct uart_state *state = drv->state + uport->line; struct tty_port *port = &state->port; struct uart_port *uart_port; struct tty_struct *tty; - mutex_lock(&port_mutex); - - /* - * Mark the port "dead" - this prevents any opens from - * succeeding while we shut down the port. - */ mutex_lock(&port->mutex); uart_port = uart_port_check(state); if (uart_port != uport) @@ -3183,7 +3196,6 @@ void uart_remove_one_port(struct uart_driver *drv, struct uart_port *uport) mutex_unlock(&port->mutex); goto out; } - uport->flags |= UPF_DEAD; mutex_unlock(&port->mutex); /* @@ -3215,6 +3227,7 @@ void uart_remove_one_port(struct uart_driver *drv, struct uart_port *uport) * Indicate that there isn't a port here anymore. */ uport->type = PORT_UNKNOWN; + uport->port_dev = NULL; mutex_lock(&port->mutex); WARN_ON(atomic_dec_return(&state->refcount) < 0); @@ -3224,7 +3237,6 @@ void uart_remove_one_port(struct uart_driver *drv, struct uart_port *uport) out: mutex_unlock(&port_mutex); } -EXPORT_SYMBOL(uart_remove_one_port); /** * uart_match_port - are the two ports equivalent? @@ -3259,6 +3271,144 @@ bool uart_match_port(const struct uart_port *port1, } EXPORT_SYMBOL(uart_match_port); +static struct serial_ctrl_device * +serial_core_get_ctrl_dev(struct serial_port_device *port_dev) +{ + struct device *dev = &port_dev->dev; + + return to_serial_base_ctrl_device(dev->parent); +} + +/* + * Find a registered serial core controller device if one exists. Returns + * the first device matching the ctrl_id. Caller must hold port_mutex. + */ +static struct serial_ctrl_device *serial_core_ctrl_find(struct uart_driver *drv, + struct device *phys_dev, + int ctrl_id) +{ + struct uart_state *state; + int i; + + lockdep_assert_held(&port_mutex); + + for (i = 0; i < drv->nr; i++) { + state = drv->state + i; + if (!state->uart_port || !state->uart_port->port_dev) + continue; + + if (state->uart_port->dev == phys_dev && + state->uart_port->ctrl_id == ctrl_id) + return serial_core_get_ctrl_dev(state->uart_port->port_dev); + } + + return NULL; +} + +static struct serial_ctrl_device *serial_core_ctrl_device_add(struct uart_port *port) +{ + return serial_base_ctrl_add(port, port->dev); +} + +static int serial_core_port_device_add(struct serial_ctrl_device *ctrl_dev, + struct uart_port *port) +{ + struct serial_port_device *port_dev; + + port_dev = serial_base_port_add(port, ctrl_dev); + if (IS_ERR(port_dev)) + return PTR_ERR(port_dev); + + port->port_dev = port_dev; + + return 0; +} + +/* + * Initialize a serial core port device, and a controller device if needed. + */ +int serial_core_register_port(struct uart_driver *drv, struct uart_port *port) +{ + struct serial_ctrl_device *ctrl_dev, *new_ctrl_dev = NULL; + int ret; + + mutex_lock(&port_mutex); + + /* + * Prevent serial_port_runtime_resume() from trying to use the port + * until serial_core_add_one_port() has completed + */ + port->flags |= UPF_DEAD; + + /* Inititalize a serial core controller device if needed */ + ctrl_dev = serial_core_ctrl_find(drv, port->dev, port->ctrl_id); + if (!ctrl_dev) { + new_ctrl_dev = serial_core_ctrl_device_add(port); + if (!new_ctrl_dev) { + ret = -ENODEV; + goto err_unlock; + } + ctrl_dev = new_ctrl_dev; + } + + /* + * Initialize a serial core port device. Tag the port dead to prevent + * serial_port_runtime_resume() trying to do anything until port has + * been registered. It gets cleared by serial_core_add_one_port(). + */ + ret = serial_core_port_device_add(ctrl_dev, port); + if (ret) + goto err_unregister_ctrl_dev; + + ret = serial_core_add_one_port(drv, port); + if (ret) + goto err_unregister_port_dev; + + port->flags &= ~UPF_DEAD; + + mutex_unlock(&port_mutex); + + return 0; + +err_unregister_port_dev: + serial_base_port_device_remove(port->port_dev); + +err_unregister_ctrl_dev: + serial_base_ctrl_device_remove(new_ctrl_dev); + +err_unlock: + mutex_unlock(&port_mutex); + + return ret; +} + +/* + * Removes a serial core port device, and the related serial core controller + * device if the last instance. + */ +void serial_core_unregister_port(struct uart_driver *drv, struct uart_port *port) +{ + struct device *phys_dev = port->dev; + struct serial_port_device *port_dev = port->port_dev; + struct serial_ctrl_device *ctrl_dev = serial_core_get_ctrl_dev(port_dev); + int ctrl_id = port->ctrl_id; + + mutex_lock(&port_mutex); + + port->flags |= UPF_DEAD; + + serial_core_remove_one_port(drv, port); + + /* Note that struct uart_port *port is no longer valid at this point */ + serial_base_port_device_remove(port_dev); + + /* Drop the serial core controller device if no ports are using it */ + if (!serial_core_ctrl_find(drv, phys_dev, ctrl_id)) + serial_base_ctrl_device_remove(ctrl_dev); + + mutex_unlock(&port_mutex); +} + /** * uart_handle_dcd_change - handle a change of carrier detect state * @uport: uart_port structure for the open port diff --git a/drivers/tty/serial/serial_ctrl.c b/drivers/tty/serial/serial_ctrl.c new file mode 100644 index 000000000000..6fcf634425dc --- /dev/null +++ b/drivers/tty/serial/serial_ctrl.c @@ -0,0 +1,68 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Serial core controller driver + * + * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/ + * Author: Tony Lindgren <tony@atomide.com> + * + * This driver manages the serial core controller struct device instances. + * The serial core controller devices are children of the physical serial + * port device. + */ + +#include <linux/device.h> +#include <linux/module.h> +#include <linux/pm_runtime.h> +#include <linux/serial_core.h> +#include <linux/spinlock.h> + +#include "serial_base.h" + +static int serial_ctrl_probe(struct device *dev) +{ + pm_runtime_enable(dev); + + return 0; +} + +static int serial_ctrl_remove(struct device *dev) +{ + pm_runtime_disable(dev); + + return 0; +} + +/* + * Serial core controller device init functions. Note that the physical + * serial port device driver may not have completed probe at this point. + */ +int serial_ctrl_register_port(struct uart_driver *drv, struct uart_port *port) +{ + return serial_core_register_port(drv, port); +} + +void serial_ctrl_unregister_port(struct uart_driver *drv, struct uart_port *port) +{ + serial_core_unregister_port(drv, port); +} + +static struct device_driver serial_ctrl_driver = { + .name = "ctrl", + .suppress_bind_attrs = true, + .probe = serial_ctrl_probe, + .remove = serial_ctrl_remove, +}; + +int serial_base_ctrl_init(void) +{ + return serial_base_driver_register(&serial_ctrl_driver); +} + +void serial_base_ctrl_exit(void) +{ + serial_base_driver_unregister(&serial_ctrl_driver); +} + +MODULE_AUTHOR("Tony Lindgren <tony@atomide.com>"); +MODULE_DESCRIPTION("Serial core controller driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/serial_port.c b/drivers/tty/serial/serial_port.c new file mode 100644 index 000000000000..862423237007 --- /dev/null +++ b/drivers/tty/serial/serial_port.c @@ -0,0 +1,105 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Serial core port device driver + * + * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/ + * Author: Tony Lindgren <tony@atomide.com> + */ + +#include <linux/device.h> +#include <linux/module.h> +#include <linux/pm_runtime.h> +#include <linux/serial_core.h> +#include <linux/spinlock.h> + +#include "serial_base.h" + +#define SERIAL_PORT_AUTOSUSPEND_DELAY_MS 500 + +/* Only considers pending TX for now. Caller must take care of locking */ +static int __serial_port_busy(struct uart_port *port) +{ + return !uart_tx_stopped(port) && + uart_circ_chars_pending(&port->state->xmit); +} + +static int serial_port_runtime_resume(struct device *dev) +{ + struct serial_port_device *port_dev = to_serial_base_port_device(dev); + struct uart_port *port; + unsigned long flags; + + port = port_dev->port; + + if (port->flags & UPF_DEAD) + goto out; + + /* Flush any pending TX for the port */ + spin_lock_irqsave(&port->lock, flags); + if (__serial_port_busy(port)) + port->ops->start_tx(port); + spin_unlock_irqrestore(&port->lock, flags); + +out: + pm_runtime_mark_last_busy(dev); + + return 0; +} + +static DEFINE_RUNTIME_DEV_PM_OPS(serial_port_pm, + NULL, serial_port_runtime_resume, NULL); + +static int serial_port_probe(struct device *dev) +{ + pm_runtime_enable(dev); + pm_runtime_set_autosuspend_delay(dev, SERIAL_PORT_AUTOSUSPEND_DELAY_MS); + pm_runtime_use_autosuspend(dev); + + return 0; +} + +static int serial_port_remove(struct device *dev) +{ + pm_runtime_dont_use_autosuspend(dev); + pm_runtime_disable(dev); + + return 0; +} + +/* + * Serial core port device init functions. Note that the physical serial + * port device driver may not have completed probe at this point. + */ +int uart_add_one_port(struct uart_driver *drv, struct uart_port *port) +{ + return serial_ctrl_register_port(drv, port); +} +EXPORT_SYMBOL(uart_add_one_port); + +void uart_remove_one_port(struct uart_driver *drv, struct uart_port *port) +{ + serial_ctrl_unregister_port(drv, port); +} +EXPORT_SYMBOL(uart_remove_one_port); + +static struct device_driver serial_port_driver = { + .name = "port", + .suppress_bind_attrs = true, + .probe = serial_port_probe, + .remove = serial_port_remove, + .pm = pm_ptr(&serial_port_pm), +}; + +int serial_base_port_init(void) +{ + return serial_base_driver_register(&serial_port_driver); +} + +void serial_base_port_exit(void) +{ + serial_base_driver_unregister(&serial_port_driver); +} + +MODULE_AUTHOR("Tony Lindgren <tony@atomide.com>"); +MODULE_DESCRIPTION("Serial controller port driver"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index ddcdb5b8523e..6d58c57acdaa 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -28,6 +28,7 @@ struct uart_port; struct serial_struct; +struct serial_port_device; struct device; struct gpio_desc; @@ -458,6 +459,7 @@ struct uart_port { struct serial_rs485 *rs485); int (*iso7816_config)(struct uart_port *, struct serial_iso7816 *iso7816); + int ctrl_id; /* optional serial core controller id */ unsigned int irq; /* irq number */ unsigned long irqflags; /* irq flags */ unsigned int uartclk; /* base uart clock */ @@ -563,7 +565,8 @@ struct uart_port { unsigned int minor; resource_size_t mapbase; /* for ioremap */ resource_size_t mapsize; - struct device *dev; /* parent device */ + struct device *dev; /* serial port physical parent device */ + struct serial_port_device *port_dev; /* serial core port device */ unsigned long sysrq; /* sysrq timeout */ unsigned int sysrq_ch; /* char for sysrq */ |