summaryrefslogtreecommitdiffstats
path: root/Documentation/ABI
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/ABI')
-rw-r--r--Documentation/ABI/testing/sysfs-bus-iio15
-rw-r--r--Documentation/ABI/testing/sysfs-bus-iio-adc-stm3218
-rw-r--r--Documentation/ABI/testing/sysfs-bus-iio-distance-srf0822
-rw-r--r--Documentation/ABI/testing/sysfs-bus-iio-timer-stm3229
4 files changed, 82 insertions, 2 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index b8f220f978dd..530809ccfacf 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -170,6 +170,16 @@ Description:
Has all of the equivalent parameters as per voltageY. Units
after application of scale and offset are m/s^2.
+What: /sys/bus/iio/devices/iio:deviceX/in_gravity_x_raw
+What: /sys/bus/iio/devices/iio:deviceX/in_gravity_y_raw
+What: /sys/bus/iio/devices/iio:deviceX/in_gravity_z_raw
+KernelVersion: 4.11
+Contact: linux-iio@vger.kernel.org
+Description:
+ Gravity in direction x, y or z (may be arbitrarily assigned
+ but should match other such assignments on device).
+ Units after application of scale and offset are m/s^2.
+
What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_x_raw
What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_y_raw
What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_z_raw
@@ -805,7 +815,7 @@ Description:
attribute. E.g. if in_voltage0_raw_thresh_rising_value is set to 1200
and in_voltage0_raw_thresh_rising_hysteresis is set to 50. The event
will get activated once in_voltage0_raw goes above 1200 and will become
- deactived again once the value falls below 1150.
+ deactivated again once the value falls below 1150.
What: /sys/.../events/in_accel_x_raw_roc_rising_value
What: /sys/.../events/in_accel_x_raw_roc_falling_value
@@ -1245,7 +1255,8 @@ Description:
reflectivity of infrared or ultrasound emitted.
Often these sensors are unit less and as such conversion
to SI units is not possible. Higher proximity measurements
- indicate closer objects, and vice versa.
+ indicate closer objects, and vice versa. Units after
+ application of scale and offset are meters.
What: /sys/.../iio:deviceX/in_illuminance_input
What: /sys/.../iio:deviceX/in_illuminance_raw
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-adc-stm32 b/Documentation/ABI/testing/sysfs-bus-iio-adc-stm32
new file mode 100644
index 000000000000..efe4c85e3c8b
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-adc-stm32
@@ -0,0 +1,18 @@
+What: /sys/bus/iio/devices/triggerX/trigger_polarity
+KernelVersion: 4.11
+Contact: fabrice.gasnier@st.com
+Description:
+ The STM32 ADC can be configured to use external trigger sources
+ (e.g. timers, pwm or exti gpio). Then, it can be tuned to start
+ conversions on external trigger by either:
+ - "rising-edge"
+ - "falling-edge"
+ - "both-edges".
+ Reading returns current trigger polarity.
+ Writing value before enabling conversions sets trigger polarity.
+
+What: /sys/bus/iio/devices/triggerX/trigger_polarity_available
+KernelVersion: 4.11
+Contact: fabrice.gasnier@st.com
+Description:
+ List all available trigger_polarity settings.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-distance-srf08 b/Documentation/ABI/testing/sysfs-bus-iio-distance-srf08
new file mode 100644
index 000000000000..0a1ca1487fa9
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-distance-srf08
@@ -0,0 +1,22 @@
+What /sys/bus/iio/devices/iio:deviceX/sensor_sensitivity
+Date: January 2017
+KernelVersion: 4.11
+Contact: linux-iio@vger.kernel.org
+Description:
+ Show or set the gain boost of the amp, from 0-31 range.
+ default 31
+
+What /sys/bus/iio/devices/iio:deviceX/sensor_max_range
+Date: January 2017
+KernelVersion: 4.11
+Contact: linux-iio@vger.kernel.org
+Description:
+ Show or set the maximum range between the sensor and the
+ first object echoed in meters. Default value is 6.020.
+ This setting limits the time the driver is waiting for a
+ echo.
+ Showing the range of available values is represented as the
+ minimum value, the step and the maximum value, all enclosed
+ in square brackets.
+ Example:
+ [0.043 0.043 11.008]
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32 b/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32
new file mode 100644
index 000000000000..6534a60037ff
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32
@@ -0,0 +1,29 @@
+What: /sys/bus/iio/devices/triggerX/master_mode_available
+KernelVersion: 4.11
+Contact: benjamin.gaignard@st.com
+Description:
+ Reading returns the list possible master modes which are:
+ - "reset" : The UG bit from the TIMx_EGR register is used as trigger output (TRGO).
+ - "enable" : The Counter Enable signal CNT_EN is used as trigger output.
+ - "update" : The update event is selected as trigger output.
+ For instance a master timer can then be used as a prescaler for a slave timer.
+ - "compare_pulse" : The trigger output send a positive pulse when the CC1IF flag is to be set.
+ - "OC1REF" : OC1REF signal is used as trigger output.
+ - "OC2REF" : OC2REF signal is used as trigger output.
+ - "OC3REF" : OC3REF signal is used as trigger output.
+ - "OC4REF" : OC4REF signal is used as trigger output.
+
+What: /sys/bus/iio/devices/triggerX/master_mode
+KernelVersion: 4.11
+Contact: benjamin.gaignard@st.com
+Description:
+ Reading returns the current master modes.
+ Writing set the master mode
+
+What: /sys/bus/iio/devices/triggerX/sampling_frequency
+KernelVersion: 4.11
+Contact: benjamin.gaignard@st.com
+Description:
+ Reading returns the current sampling frequency.
+ Writing an value different of 0 set and start sampling.
+ Writing 0 stop sampling.