diff options
Diffstat (limited to 'arch/arm/mach-msm/board-trout-panel.c')
| -rw-r--r-- | arch/arm/mach-msm/board-trout-panel.c | 297 |
1 files changed, 297 insertions, 0 deletions
diff --git a/arch/arm/mach-msm/board-trout-panel.c b/arch/arm/mach-msm/board-trout-panel.c new file mode 100644 index 000000000000..729bb49a44ca --- /dev/null +++ b/arch/arm/mach-msm/board-trout-panel.c @@ -0,0 +1,297 @@ +/* linux/arch/arm/mach-msm/board-trout-mddi.c +** Author: Brian Swetland <swetland@google.com> +*/ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/leds.h> +#include <linux/clk.h> +#include <linux/err.h> + +#include <asm/io.h> +#include <asm/gpio.h> +#include <asm/mach-types.h> + +#include <mach/msm_fb.h> +#include <mach/vreg.h> + +#include "board-trout.h" +#include "proc_comm.h" +#include "devices.h" + +#define TROUT_DEFAULT_BACKLIGHT_BRIGHTNESS 255 + +#define MDDI_CLIENT_CORE_BASE 0x108000 +#define LCD_CONTROL_BLOCK_BASE 0x110000 +#define SPI_BLOCK_BASE 0x120000 +#define I2C_BLOCK_BASE 0x130000 +#define PWM_BLOCK_BASE 0x140000 +#define GPIO_BLOCK_BASE 0x150000 +#define SYSTEM_BLOCK1_BASE 0x160000 +#define SYSTEM_BLOCK2_BASE 0x170000 + + +#define DPSUS (MDDI_CLIENT_CORE_BASE|0x24) +#define SYSCLKENA (MDDI_CLIENT_CORE_BASE|0x2C) +#define PWM0OFF (PWM_BLOCK_BASE|0x1C) + +#define V_VDDE2E_VDD2_GPIO 0 +#define MDDI_RST_N 82 + +#define MDDICAP0 (MDDI_CLIENT_CORE_BASE|0x00) +#define MDDICAP1 (MDDI_CLIENT_CORE_BASE|0x04) +#define MDDICAP2 (MDDI_CLIENT_CORE_BASE|0x08) +#define MDDICAP3 (MDDI_CLIENT_CORE_BASE|0x0C) +#define MDCAPCHG (MDDI_CLIENT_CORE_BASE|0x10) +#define MDCRCERC (MDDI_CLIENT_CORE_BASE|0x14) +#define TTBUSSEL (MDDI_CLIENT_CORE_BASE|0x18) +#define DPSET0 (MDDI_CLIENT_CORE_BASE|0x1C) +#define DPSET1 (MDDI_CLIENT_CORE_BASE|0x20) +#define DPSUS (MDDI_CLIENT_CORE_BASE|0x24) +#define DPRUN (MDDI_CLIENT_CORE_BASE|0x28) +#define SYSCKENA (MDDI_CLIENT_CORE_BASE|0x2C) +#define TESTMODE (MDDI_CLIENT_CORE_BASE|0x30) +#define FIFOMONI (MDDI_CLIENT_CORE_BASE|0x34) +#define INTMONI (MDDI_CLIENT_CORE_BASE|0x38) +#define MDIOBIST (MDDI_CLIENT_CORE_BASE|0x3C) +#define MDIOPSET (MDDI_CLIENT_CORE_BASE|0x40) +#define BITMAP0 (MDDI_CLIENT_CORE_BASE|0x44) +#define BITMAP1 (MDDI_CLIENT_CORE_BASE|0x48) +#define BITMAP2 (MDDI_CLIENT_CORE_BASE|0x4C) +#define BITMAP3 (MDDI_CLIENT_CORE_BASE|0x50) +#define BITMAP4 (MDDI_CLIENT_CORE_BASE|0x54) + +#define SRST (LCD_CONTROL_BLOCK_BASE|0x00) +#define PORT_ENB (LCD_CONTROL_BLOCK_BASE|0x04) +#define START (LCD_CONTROL_BLOCK_BASE|0x08) +#define PORT (LCD_CONTROL_BLOCK_BASE|0x0C) +#define CMN (LCD_CONTROL_BLOCK_BASE|0x10) +#define GAMMA (LCD_CONTROL_BLOCK_BASE|0x14) +#define INTFLG (LCD_CONTROL_BLOCK_BASE|0x18) +#define INTMSK (LCD_CONTROL_BLOCK_BASE|0x1C) +#define MPLFBUF (LCD_CONTROL_BLOCK_BASE|0x20) +#define HDE_LEFT (LCD_CONTROL_BLOCK_BASE|0x24) +#define VDE_TOP (LCD_CONTROL_BLOCK_BASE|0x28) +#define PXL (LCD_CONTROL_BLOCK_BASE|0x30) +#define HCYCLE (LCD_CONTROL_BLOCK_BASE|0x34) +#define HSW (LCD_CONTROL_BLOCK_BASE|0x38) +#define HDE_START (LCD_CONTROL_BLOCK_BASE|0x3C) +#define HDE_SIZE (LCD_CONTROL_BLOCK_BASE|0x40) +#define VCYCLE (LCD_CONTROL_BLOCK_BASE|0x44) +#define VSW (LCD_CONTROL_BLOCK_BASE|0x48) +#define VDE_START (LCD_CONTROL_BLOCK_BASE|0x4C) +#define VDE_SIZE (LCD_CONTROL_BLOCK_BASE|0x50) +#define WAKEUP (LCD_CONTROL_BLOCK_BASE|0x54) +#define WSYN_DLY (LCD_CONTROL_BLOCK_BASE|0x58) +#define REGENB (LCD_CONTROL_BLOCK_BASE|0x5C) +#define VSYNIF (LCD_CONTROL_BLOCK_BASE|0x60) +#define WRSTB (LCD_CONTROL_BLOCK_BASE|0x64) +#define RDSTB (LCD_CONTROL_BLOCK_BASE|0x68) +#define ASY_DATA (LCD_CONTROL_BLOCK_BASE|0x6C) +#define ASY_DATB (LCD_CONTROL_BLOCK_BASE|0x70) +#define ASY_DATC (LCD_CONTROL_BLOCK_BASE|0x74) +#define ASY_DATD (LCD_CONTROL_BLOCK_BASE|0x78) +#define ASY_DATE (LCD_CONTROL_BLOCK_BASE|0x7C) +#define ASY_DATF (LCD_CONTROL_BLOCK_BASE|0x80) +#define ASY_DATG (LCD_CONTROL_BLOCK_BASE|0x84) +#define ASY_DATH (LCD_CONTROL_BLOCK_BASE|0x88) +#define ASY_CMDSET (LCD_CONTROL_BLOCK_BASE|0x8C) + +#define SSICTL (SPI_BLOCK_BASE|0x00) +#define SSITIME (SPI_BLOCK_BASE|0x04) +#define SSITX (SPI_BLOCK_BASE|0x08) +#define SSIRX (SPI_BLOCK_BASE|0x0C) +#define SSIINTC (SPI_BLOCK_BASE|0x10) +#define SSIINTS (SPI_BLOCK_BASE|0x14) +#define SSIDBG1 (SPI_BLOCK_BASE|0x18) +#define SSIDBG2 (SPI_BLOCK_BASE|0x1C) +#define SSIID (SPI_BLOCK_BASE|0x20) + +#define WKREQ (SYSTEM_BLOCK1_BASE|0x00) +#define CLKENB (SYSTEM_BLOCK1_BASE|0x04) +#define DRAMPWR (SYSTEM_BLOCK1_BASE|0x08) +#define INTMASK (SYSTEM_BLOCK1_BASE|0x0C) +#define GPIOSEL (SYSTEM_BLOCK2_BASE|0x00) + +#define GPIODATA (GPIO_BLOCK_BASE|0x00) +#define GPIODIR (GPIO_BLOCK_BASE|0x04) +#define GPIOIS (GPIO_BLOCK_BASE|0x08) +#define GPIOIBE (GPIO_BLOCK_BASE|0x0C) +#define GPIOIEV (GPIO_BLOCK_BASE|0x10) +#define GPIOIE (GPIO_BLOCK_BASE|0x14) +#define GPIORIS (GPIO_BLOCK_BASE|0x18) +#define GPIOMIS (GPIO_BLOCK_BASE|0x1C) +#define GPIOIC (GPIO_BLOCK_BASE|0x20) +#define GPIOOMS (GPIO_BLOCK_BASE|0x24) +#define GPIOPC (GPIO_BLOCK_BASE|0x28) +#define GPIOID (GPIO_BLOCK_BASE|0x30) + +#define SPI_WRITE(reg, val) \ + { SSITX, 0x00010000 | (((reg) & 0xff) << 8) | ((val) & 0xff) }, \ + { 0, 5 }, + +#define SPI_WRITE1(reg) \ + { SSITX, (reg) & 0xff }, \ + { 0, 5 }, + +struct mddi_table { + uint32_t reg; + uint32_t value; +}; +static struct mddi_table mddi_toshiba_init_table[] = { + { DPSET0, 0x09e90046 }, + { DPSET1, 0x00000118 }, + { DPSUS, 0x00000000 }, + { DPRUN, 0x00000001 }, + { 1, 14 }, /* msleep 14 */ + { SYSCKENA, 0x00000001 }, + { CLKENB, 0x0000A1EF }, /* # SYS.CLKENB # Enable clocks for each module (without DCLK , i2cCLK) */ + + { GPIODATA, 0x02000200 }, /* # GPI .GPIODATA # GPIO2(RESET_LCD_N) set to 0 , GPIO3(eDRAM_Power) set to 0 */ + { GPIODIR, 0x000030D }, /* 24D # GPI .GPIODIR # Select direction of GPIO port (0,2,3,6,9 output) */ + { GPIOSEL, 0/*0x00000173*/}, /* # SYS.GPIOSEL # GPIO port multiplexing control */ + { GPIOPC, 0x03C300C0 }, /* # GPI .GPIOPC # GPIO2,3 PD cut */ + { WKREQ, 0x00000000 }, /* # SYS.WKREQ # Wake-up request event is VSYNC alignment */ + + { GPIOIBE, 0x000003FF }, + { GPIOIS, 0x00000000 }, + { GPIOIC, 0x000003FF }, + { GPIOIE, 0x00000000 }, + + { GPIODATA, 0x00040004 }, /* # GPI .GPIODATA # eDRAM VD supply */ + { 1, 1 }, /* msleep 1 */ + { GPIODATA, 0x02040004 }, /* # GPI .GPIODATA # eDRAM VD supply */ + { DRAMPWR, 0x00000001 }, /* eDRAM power */ +}; + +#define GPIOSEL_VWAKEINT (1U << 0) +#define INTMASK_VWAKEOUT (1U << 0) + + +static struct clk *gp_clk; +static int trout_new_backlight = 1; +static struct vreg *vreg_mddi_1v5; +static struct vreg *vreg_lcm_2v85; + +static void trout_process_mddi_table(struct msm_mddi_client_data *client_data, + struct mddi_table *table, size_t count) +{ + int i; + for (i = 0; i < count; i++) { + uint32_t reg = table[i].reg; + uint32_t value = table[i].value; + + if (reg == 0) + udelay(value); + else if (reg == 1) + msleep(value); + else + client_data->remote_write(client_data, value, reg); + } +} + +static int trout_mddi_toshiba_client_init( + struct msm_mddi_bridge_platform_data *bridge_data, + struct msm_mddi_client_data *client_data) +{ + int panel_id; + + client_data->auto_hibernate(client_data, 0); + trout_process_mddi_table(client_data, mddi_toshiba_init_table, + ARRAY_SIZE(mddi_toshiba_init_table)); + client_data->auto_hibernate(client_data, 1); + panel_id = (client_data->remote_read(client_data, GPIODATA) >> 4) & 3; + if (panel_id > 1) { + printk(KERN_WARNING "unknown panel id at mddi_enable\n"); + return -1; + } + return 0; +} + +static int trout_mddi_toshiba_client_uninit( + struct msm_mddi_bridge_platform_data *bridge_data, + struct msm_mddi_client_data *client_data) +{ + return 0; +} + +static struct resource resources_msm_fb[] = { + { + .start = MSM_FB_BASE, + .end = MSM_FB_BASE + MSM_FB_SIZE, + .flags = IORESOURCE_MEM, + }, +}; + +struct msm_mddi_bridge_platform_data toshiba_client_data = { + .init = trout_mddi_toshiba_client_init, + .uninit = trout_mddi_toshiba_client_uninit, + .fb_data = { + .xres = 320, + .yres = 480, + .width = 45, + .height = 67, + .output_format = 0, + }, +}; + +static struct msm_mddi_platform_data mddi_pdata = { + .clk_rate = 122880000, + .fb_resource = resources_msm_fb, + .num_clients = 1, + .client_platform_data = { + { + .product_id = (0xd263 << 16 | 0), + .name = "mddi_c_d263_0000", + .id = 0, + .client_data = &toshiba_client_data, + .clk_rate = 0, + }, + }, +}; + +int __init trout_init_panel(void) +{ + int rc; + + if (!machine_is_trout()) + return 0; + vreg_mddi_1v5 = vreg_get(0, "gp2"); + if (IS_ERR(vreg_mddi_1v5)) + return PTR_ERR(vreg_mddi_1v5); + vreg_lcm_2v85 = vreg_get(0, "gp4"); + if (IS_ERR(vreg_lcm_2v85)) + return PTR_ERR(vreg_lcm_2v85); + + trout_new_backlight = system_rev >= 5; + if (trout_new_backlight) { + uint32_t config = PCOM_GPIO_CFG(27, 0, GPIO_OUTPUT, + GPIO_NO_PULL, GPIO_8MA); + msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX, &config, 0); + } else { + uint32_t config = PCOM_GPIO_CFG(27, 1, GPIO_OUTPUT, + GPIO_NO_PULL, GPIO_8MA); + msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX, &config, 0); + + gp_clk = clk_get(NULL, "gp_clk"); + if (IS_ERR(gp_clk)) { + printk(KERN_ERR "trout_init_panel: could not get gp" + "clock\n"); + gp_clk = NULL; + } + rc = clk_set_rate(gp_clk, 19200000); + if (rc) + printk(KERN_ERR "trout_init_panel: set clock rate " + "failed\n"); + } + + rc = platform_device_register(&msm_device_mdp); + if (rc) + return rc; + msm_device_mddi0.dev.platform_data = &mddi_pdata; + return platform_device_register(&msm_device_mddi0); +} + +device_initcall(trout_init_panel); |