diff options
Diffstat (limited to 'drivers/mmc/host/mmci.c')
-rw-r--r-- | drivers/mmc/host/mmci.c | 165 |
1 files changed, 126 insertions, 39 deletions
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index f4f3038c1df0..c3785edc0e92 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -61,6 +61,7 @@ static unsigned int fmax = 515633; * @pwrreg_powerup: power up value for MMCIPOWER register * @signal_direction: input/out direction of bus signals can be indicated * @pwrreg_clkgate: MMCIPOWER register must be used to gate the clock + * @busy_detect: true if busy detection on dat0 is supported */ struct variant_data { unsigned int clkreg; @@ -74,6 +75,7 @@ struct variant_data { u32 pwrreg_powerup; bool signal_direction; bool pwrreg_clkgate; + bool busy_detect; }; static struct variant_data variant_arm = { @@ -132,6 +134,7 @@ static struct variant_data variant_ux500 = { .pwrreg_powerup = MCI_PWR_ON, .signal_direction = true, .pwrreg_clkgate = true, + .busy_detect = true, }; static struct variant_data variant_ux500v2 = { @@ -146,8 +149,28 @@ static struct variant_data variant_ux500v2 = { .pwrreg_powerup = MCI_PWR_ON, .signal_direction = true, .pwrreg_clkgate = true, + .busy_detect = true, }; +static int mmci_card_busy(struct mmc_host *mmc) +{ + struct mmci_host *host = mmc_priv(mmc); + unsigned long flags; + int busy = 0; + + pm_runtime_get_sync(mmc_dev(mmc)); + + spin_lock_irqsave(&host->lock, flags); + if (readl(host->base + MMCISTATUS) & MCI_ST_CARDBUSY) + busy = 1; + spin_unlock_irqrestore(&host->lock, flags); + + pm_runtime_mark_last_busy(mmc_dev(mmc)); + pm_runtime_put_autosuspend(mmc_dev(mmc)); + + return busy; +} + /* * Validate mmc prerequisites */ @@ -191,11 +214,28 @@ static void mmci_write_pwrreg(struct mmci_host *host, u32 pwr) /* * This must be called with host->lock held */ +static void mmci_write_datactrlreg(struct mmci_host *host, u32 datactrl) +{ + /* Keep ST Micro busy mode if enabled */ + datactrl |= host->datactrl_reg & MCI_ST_DPSM_BUSYMODE; + + if (host->datactrl_reg != datactrl) { + host->datactrl_reg = datactrl; + writel(datactrl, host->base + MMCIDATACTRL); + } +} + +/* + * This must be called with host->lock held + */ static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired) { struct variant_data *variant = host->variant; u32 clk = variant->clkreg; + /* Make sure cclk reflects the current calculated clock */ + host->cclk = 0; + if (desired) { if (desired >= host->mclk) { clk = MCI_CLK_BYPASS; @@ -230,6 +270,9 @@ static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired) /* clk |= MCI_CLK_PWRSAVE; */ } + /* Set actual clock for debug */ + host->mmc->actual_clock = host->cclk; + if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_4) clk |= MCI_4BIT_BUS; if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_8) @@ -275,7 +318,7 @@ static void mmci_set_mask1(struct mmci_host *host, unsigned int mask) static void mmci_stop_data(struct mmci_host *host) { - writel(0, host->base + MMCIDATACTRL); + mmci_write_datactrlreg(host, 0); mmci_set_mask1(host, 0); host->data = NULL; } @@ -304,10 +347,8 @@ static void mmci_dma_setup(struct mmci_host *host) const char *rxname, *txname; dma_cap_mask_t mask; - if (!plat || !plat->dma_filter) { - dev_info(mmc_dev(host->mmc), "no DMA platform data\n"); - return; - } + host->dma_rx_channel = dma_request_slave_channel(mmc_dev(host->mmc), "rx"); + host->dma_tx_channel = dma_request_slave_channel(mmc_dev(host->mmc), "tx"); /* initialize pre request cookie */ host->next_data.cookie = 1; @@ -316,30 +357,33 @@ static void mmci_dma_setup(struct mmci_host *host) dma_cap_zero(mask); dma_cap_set(DMA_SLAVE, mask); - /* - * If only an RX channel is specified, the driver will - * attempt to use it bidirectionally, however if it is - * is specified but cannot be located, DMA will be disabled. - */ - if (plat->dma_rx_param) { - host->dma_rx_channel = dma_request_channel(mask, + if (plat && plat->dma_filter) { + if (!host->dma_rx_channel && plat->dma_rx_param) { + host->dma_rx_channel = dma_request_channel(mask, plat->dma_filter, plat->dma_rx_param); - /* E.g if no DMA hardware is present */ - if (!host->dma_rx_channel) - dev_err(mmc_dev(host->mmc), "no RX DMA channel\n"); - } + /* E.g if no DMA hardware is present */ + if (!host->dma_rx_channel) + dev_err(mmc_dev(host->mmc), "no RX DMA channel\n"); + } - if (plat->dma_tx_param) { - host->dma_tx_channel = dma_request_channel(mask, + if (!host->dma_tx_channel && plat->dma_tx_param) { + host->dma_tx_channel = dma_request_channel(mask, plat->dma_filter, plat->dma_tx_param); - if (!host->dma_tx_channel) - dev_warn(mmc_dev(host->mmc), "no TX DMA channel\n"); - } else { - host->dma_tx_channel = host->dma_rx_channel; + if (!host->dma_tx_channel) + dev_warn(mmc_dev(host->mmc), "no TX DMA channel\n"); + } } + /* + * If only an RX channel is specified, the driver will + * attempt to use it bidirectionally, however if it is + * is specified but cannot be located, DMA will be disabled. + */ + if (host->dma_rx_channel && !host->dma_tx_channel) + host->dma_tx_channel = host->dma_rx_channel; + if (host->dma_rx_channel) rxname = dma_chan_name(host->dma_rx_channel); else @@ -552,7 +596,7 @@ static int mmci_dma_start_data(struct mmci_host *host, unsigned int datactrl) datactrl |= MCI_DPSM_DMAENABLE; /* Trigger the DMA transfer */ - writel(datactrl, host->base + MMCIDATACTRL); + mmci_write_datactrlreg(host, datactrl); /* * Let the MMCI say when the data is ended and it's time @@ -750,7 +794,7 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data) irqmask = MCI_TXFIFOHALFEMPTYMASK; } - writel(datactrl, base + MMCIDATACTRL); + mmci_write_datactrlreg(host, datactrl); writel(readl(base + MMCIMASK0) & ~MCI_DATAENDMASK, base + MMCIMASK0); mmci_set_mask1(host, irqmask); } @@ -842,7 +886,7 @@ mmci_data_irq(struct mmci_host *host, struct mmc_data *data, /* The error clause is handled above, success! */ data->bytes_xfered = data->blksz * data->blocks; - if (!data->stop) { + if (!data->stop || host->mrq->sbc) { mmci_request_end(host, data->mrq); } else { mmci_start_command(host, data->stop, 0); @@ -855,6 +899,7 @@ mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd, unsigned int status) { void __iomem *base = host->base; + bool sbc = (cmd == host->mrq->sbc); host->cmd = NULL; @@ -869,7 +914,7 @@ mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd, cmd->resp[3] = readl(base + MMCIRESPONSE3); } - if (!cmd->data || cmd->error) { + if ((!sbc && !cmd->data) || cmd->error) { if (host->data) { /* Terminate the DMA transfer */ if (dma_inprogress(host)) { @@ -878,7 +923,9 @@ mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd, } mmci_stop_data(host); } - mmci_request_end(host, cmd->mrq); + mmci_request_end(host, host->mrq); + } else if (sbc) { + mmci_start_command(host, host->mrq->cmd, 0); } else if (!(cmd->data->flags & MMC_DATA_READ)) { mmci_start_data(host, cmd->data); } @@ -1119,7 +1166,10 @@ static void mmci_request(struct mmc_host *mmc, struct mmc_request *mrq) if (mrq->data && mrq->data->flags & MMC_DATA_READ) mmci_start_data(host, mrq->data); - mmci_start_command(host, mrq->cmd, 0); + if (mrq->sbc) + mmci_start_command(host, mrq->sbc, 0); + else + mmci_start_command(host, mrq->cmd, 0); spin_unlock_irqrestore(&host->lock, flags); } @@ -1143,9 +1193,10 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) if (!IS_ERR(mmc->supply.vmmc)) mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0); - if (!IS_ERR(mmc->supply.vqmmc) && - regulator_is_enabled(mmc->supply.vqmmc)) + if (!IS_ERR(mmc->supply.vqmmc) && host->vqmmc_enabled) { regulator_disable(mmc->supply.vqmmc); + host->vqmmc_enabled = false; + } break; case MMC_POWER_UP: @@ -1161,12 +1212,13 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) break; case MMC_POWER_ON: - if (!IS_ERR(mmc->supply.vqmmc) && - !regulator_is_enabled(mmc->supply.vqmmc)) { + if (!IS_ERR(mmc->supply.vqmmc) && !host->vqmmc_enabled) { ret = regulator_enable(mmc->supply.vqmmc); if (ret < 0) dev_err(mmc_dev(mmc), "failed to enable vqmmc regulator\n"); + else + host->vqmmc_enabled = true; } pwr |= MCI_PWR_ON; @@ -1251,6 +1303,39 @@ static int mmci_get_cd(struct mmc_host *mmc) return status; } +static int mmci_sig_volt_switch(struct mmc_host *mmc, struct mmc_ios *ios) +{ + int ret = 0; + + if (!IS_ERR(mmc->supply.vqmmc)) { + + pm_runtime_get_sync(mmc_dev(mmc)); + + switch (ios->signal_voltage) { + case MMC_SIGNAL_VOLTAGE_330: + ret = regulator_set_voltage(mmc->supply.vqmmc, + 2700000, 3600000); + break; + case MMC_SIGNAL_VOLTAGE_180: + ret = regulator_set_voltage(mmc->supply.vqmmc, + 1700000, 1950000); + break; + case MMC_SIGNAL_VOLTAGE_120: + ret = regulator_set_voltage(mmc->supply.vqmmc, + 1100000, 1300000); + break; + } + + if (ret) + dev_warn(mmc_dev(mmc), "Voltage switch failed\n"); + + pm_runtime_mark_last_busy(mmc_dev(mmc)); + pm_runtime_put_autosuspend(mmc_dev(mmc)); + } + + return ret; +} + static irqreturn_t mmci_cd_irq(int irq, void *dev_id) { struct mmci_host *host = dev_id; @@ -1260,13 +1345,14 @@ static irqreturn_t mmci_cd_irq(int irq, void *dev_id) return IRQ_HANDLED; } -static const struct mmc_host_ops mmci_ops = { +static struct mmc_host_ops mmci_ops = { .request = mmci_request, .pre_req = mmci_pre_request, .post_req = mmci_post_request, .set_ios = mmci_set_ios, .get_ro = mmci_get_ro, .get_cd = mmci_get_cd, + .start_signal_voltage_switch = mmci_sig_volt_switch, }; #ifdef CONFIG_OF @@ -1362,16 +1448,15 @@ static int mmci_probe(struct amba_device *dev, dev_dbg(mmc_dev(mmc), "designer ID = 0x%02x\n", host->hw_designer); dev_dbg(mmc_dev(mmc), "revision = 0x%01x\n", host->hw_revision); - host->clk = clk_get(&dev->dev, NULL); + host->clk = devm_clk_get(&dev->dev, NULL); if (IS_ERR(host->clk)) { ret = PTR_ERR(host->clk); - host->clk = NULL; goto host_free; } ret = clk_prepare_enable(host->clk); if (ret) - goto clk_free; + goto host_free; host->plat = plat; host->variant = variant; @@ -1396,6 +1481,11 @@ static int mmci_probe(struct amba_device *dev, goto clk_disable; } + if (variant->busy_detect) { + mmci_ops.card_busy = mmci_card_busy; + mmci_write_datactrlreg(host, MCI_ST_DPSM_BUSYMODE); + } + mmc->ops = &mmci_ops; /* * The ARM and ST versions of the block have slightly different @@ -1576,8 +1666,6 @@ static int mmci_probe(struct amba_device *dev, iounmap(host->base); clk_disable: clk_disable_unprepare(host->clk); - clk_free: - clk_put(host->clk); host_free: mmc_free_host(mmc); rel_regions: @@ -1623,7 +1711,6 @@ static int mmci_remove(struct amba_device *dev) iounmap(host->base); clk_disable_unprepare(host->clk); - clk_put(host->clk); mmc_free_host(mmc); |