diff options
Diffstat (limited to 'drivers/net/ethernet/intel/igb/e1000_82575.c')
| -rw-r--r-- | drivers/net/ethernet/intel/igb/e1000_82575.c | 77 |
1 files changed, 58 insertions, 19 deletions
diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c index ca4641e2f748..fdaaf2709d0a 100644 --- a/drivers/net/ethernet/intel/igb/e1000_82575.c +++ b/drivers/net/ethernet/intel/igb/e1000_82575.c @@ -319,6 +319,7 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw) nvm->ops.acquire = igb_acquire_nvm_i210; nvm->ops.release = igb_release_nvm_i210; nvm->ops.read = igb_read_nvm_srrd_i210; + nvm->ops.write = igb_write_nvm_srwr_i210; nvm->ops.valid_led_default = igb_valid_led_default_i210; break; case e1000_i211: @@ -1027,6 +1028,15 @@ static s32 igb_check_for_link_82575(struct e1000_hw *hw) * continue to check for link. */ hw->mac.get_link_status = !hw->mac.serdes_has_link; + + /* Configure Flow Control now that Auto-Neg has completed. + * First, we need to restore the desired flow control + * settings because we may have had to re-autoneg with a + * different link partner. + */ + ret_val = igb_config_fc_after_link_up(hw); + if (ret_val) + hw_dbg("Error configuring flow control\n"); } else { ret_val = igb_check_for_copper_link(hw); } @@ -1277,12 +1287,20 @@ static s32 igb_setup_copper_link_82575(struct e1000_hw *hw) { u32 ctrl; s32 ret_val; + u32 phpm_reg; ctrl = rd32(E1000_CTRL); ctrl |= E1000_CTRL_SLU; ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX); wr32(E1000_CTRL, ctrl); + /* Clear Go Link Disconnect bit */ + if (hw->mac.type >= e1000_82580) { + phpm_reg = rd32(E1000_82580_PHY_POWER_MGMT); + phpm_reg &= ~E1000_82580_PM_GO_LINKD; + wr32(E1000_82580_PHY_POWER_MGMT, phpm_reg); + } + ret_val = igb_setup_serdes_link_82575(hw); if (ret_val) goto out; @@ -1336,7 +1354,7 @@ out: **/ static s32 igb_setup_serdes_link_82575(struct e1000_hw *hw) { - u32 ctrl_ext, ctrl_reg, reg; + u32 ctrl_ext, ctrl_reg, reg, anadv_reg; bool pcs_autoneg; s32 ret_val = E1000_SUCCESS; u16 data; @@ -1424,27 +1442,45 @@ static s32 igb_setup_serdes_link_82575(struct e1000_hw *hw) reg &= ~(E1000_PCS_LCTL_AN_ENABLE | E1000_PCS_LCTL_FLV_LINK_UP | E1000_PCS_LCTL_FSD | E1000_PCS_LCTL_FORCE_LINK); - /* - * We force flow control to prevent the CTRL register values from being - * overwritten by the autonegotiated flow control values - */ - reg |= E1000_PCS_LCTL_FORCE_FCTRL; - if (pcs_autoneg) { /* Set PCS register for autoneg */ reg |= E1000_PCS_LCTL_AN_ENABLE | /* Enable Autoneg */ E1000_PCS_LCTL_AN_RESTART; /* Restart autoneg */ + + /* Disable force flow control for autoneg */ + reg &= ~E1000_PCS_LCTL_FORCE_FCTRL; + + /* Configure flow control advertisement for autoneg */ + anadv_reg = rd32(E1000_PCS_ANADV); + anadv_reg &= ~(E1000_TXCW_ASM_DIR | E1000_TXCW_PAUSE); + switch (hw->fc.requested_mode) { + case e1000_fc_full: + case e1000_fc_rx_pause: + anadv_reg |= E1000_TXCW_ASM_DIR; + anadv_reg |= E1000_TXCW_PAUSE; + break; + case e1000_fc_tx_pause: + anadv_reg |= E1000_TXCW_ASM_DIR; + break; + default: + break; + } + wr32(E1000_PCS_ANADV, anadv_reg); + hw_dbg("Configuring Autoneg:PCS_LCTL=0x%08X\n", reg); } else { /* Set PCS register for forced link */ reg |= E1000_PCS_LCTL_FSD; /* Force Speed */ + /* Force flow control for forced link */ + reg |= E1000_PCS_LCTL_FORCE_FCTRL; + hw_dbg("Configuring Forced Link:PCS_LCTL=0x%08X\n", reg); } wr32(E1000_PCS_LCTL, reg); - if (!igb_sgmii_active_82575(hw)) + if (!pcs_autoneg && !igb_sgmii_active_82575(hw)) igb_force_mac_fc(hw); return ret_val; @@ -1918,6 +1954,12 @@ static s32 igb_reset_hw_82580(struct e1000_hw *hw) hw->dev_spec._82575.global_device_reset = false; + /* due to hw errata, global device reset doesn't always + * work on 82580 + */ + if (hw->mac.type == e1000_82580) + global_device_reset = false; + /* Get current control state. */ ctrl = rd32(E1000_CTRL); @@ -2233,19 +2275,16 @@ s32 igb_set_eee_i350(struct e1000_hw *hw) /* enable or disable per user setting */ if (!(hw->dev_spec._82575.eee_disable)) { - ipcnfg |= (E1000_IPCNFG_EEE_1G_AN | - E1000_IPCNFG_EEE_100M_AN); - eeer |= (E1000_EEER_TX_LPI_EN | - E1000_EEER_RX_LPI_EN | + u32 eee_su = rd32(E1000_EEE_SU); + + ipcnfg |= (E1000_IPCNFG_EEE_1G_AN | E1000_IPCNFG_EEE_100M_AN); + eeer |= (E1000_EEER_TX_LPI_EN | E1000_EEER_RX_LPI_EN | E1000_EEER_LPI_FC); - /* keep the LPI clock running before EEE is enabled */ - if (hw->mac.type == e1000_i210 || hw->mac.type == e1000_i211) { - u32 eee_su; - eee_su = rd32(E1000_EEE_SU); - eee_su &= ~E1000_EEE_SU_LPI_CLK_STP; - wr32(E1000_EEE_SU, eee_su); - } + /* This bit should not be set in normal operation. */ + if (eee_su & E1000_EEE_SU_LPI_CLK_STP) + hw_dbg("LPI Clock Stop Bit should not be set!\n"); + } else { ipcnfg &= ~(E1000_IPCNFG_EEE_1G_AN | |