summaryrefslogtreecommitdiffstats
path: root/include/uapi/linux/nl80211.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/uapi/linux/nl80211.h')
-rw-r--r--include/uapi/linux/nl80211.h129
1 files changed, 116 insertions, 13 deletions
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index f752e9821e71..91054fd660e0 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -581,7 +581,14 @@
* operation, %NL80211_ATTR_MAC contains the peer MAC address, and
* %NL80211_ATTR_REASON_CODE the reason code to be used (only with
* %NL80211_TDLS_TEARDOWN).
- * @NL80211_CMD_TDLS_MGMT: Send a TDLS management frame.
+ * @NL80211_CMD_TDLS_MGMT: Send a TDLS management frame. The
+ * %NL80211_ATTR_TDLS_ACTION attribute determines the type of frame to be
+ * sent. Public Action codes (802.11-2012 8.1.5.1) will be sent as
+ * 802.11 management frames, while TDLS action codes (802.11-2012
+ * 8.5.13.1) will be encapsulated and sent as data frames. The currently
+ * supported Public Action code is %WLAN_PUB_ACTION_TDLS_DISCOVER_RES
+ * and the currently supported TDLS actions codes are given in
+ * &enum ieee80211_tdls_actioncode.
*
* @NL80211_CMD_UNEXPECTED_FRAME: Used by an application controlling an AP
* (or GO) interface (i.e. hostapd) to ask for unexpected frames to
@@ -686,6 +693,21 @@
* other station that transmission must be blocked until the channel
* switch is complete.
*
+ * @NL80211_CMD_VENDOR: Vendor-specified command/event. The command is specified
+ * by the %NL80211_ATTR_VENDOR_ID attribute and a sub-command in
+ * %NL80211_ATTR_VENDOR_SUBCMD. Parameter(s) can be transported in
+ * %NL80211_ATTR_VENDOR_DATA.
+ * For feature advertisement, the %NL80211_ATTR_VENDOR_DATA attribute is
+ * used in the wiphy data as a nested attribute containing descriptions
+ * (&struct nl80211_vendor_cmd_info) of the supported vendor commands.
+ * This may also be sent as an event with the same attributes.
+ *
+ * @NL80211_CMD_SET_QOS_MAP: Set Interworking QoS mapping for IP DSCP values.
+ * The QoS mapping information is included in %NL80211_ATTR_QOS_MAP. If
+ * that attribute is not included, QoS mapping is disabled. Since this
+ * QoS mapping is relevant for IP packets, it is only valid during an
+ * association. This is cleared on disassociation and AP restart.
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
@@ -853,6 +875,10 @@ enum nl80211_commands {
NL80211_CMD_CHANNEL_SWITCH,
+ NL80211_CMD_VENDOR,
+
+ NL80211_CMD_SET_QOS_MAP,
+
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
@@ -1508,6 +1534,27 @@ enum nl80211_commands {
* to react to radar events, e.g. initiate a channel switch or leave the
* IBSS network.
*
+ * @NL80211_ATTR_SUPPORT_5_MHZ: A flag indicating that the device supports
+ * 5 MHz channel bandwidth.
+ * @NL80211_ATTR_SUPPORT_10_MHZ: A flag indicating that the device supports
+ * 10 MHz channel bandwidth.
+ *
+ * @NL80211_ATTR_OPMODE_NOTIF: Operating mode field from Operating Mode
+ * Notification Element based on association request when used with
+ * %NL80211_CMD_NEW_STATION; u8 attribute.
+ *
+ * @NL80211_ATTR_VENDOR_ID: The vendor ID, either a 24-bit OUI or, if
+ * %NL80211_VENDOR_ID_IS_LINUX is set, a special Linux ID (not used yet)
+ * @NL80211_ATTR_VENDOR_SUBCMD: vendor sub-command
+ * @NL80211_ATTR_VENDOR_DATA: data for the vendor command, if any; this
+ * attribute is also used for vendor command feature advertisement
+ * @NL80211_ATTR_VENDOR_EVENTS: used for event list advertising in the wiphy
+ * info, containing a nested array of possible events
+ *
+ * @NL80211_ATTR_QOS_MAP: IP DSCP mapping for Interworking QoS mapping. This
+ * data is in the format defined for the payload of the QoS Map Set element
+ * in IEEE Std 802.11-2012, 8.4.2.97.
+ *
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
*/
@@ -1824,6 +1871,18 @@ enum nl80211_attrs {
NL80211_ATTR_HANDLE_DFS,
+ NL80211_ATTR_SUPPORT_5_MHZ,
+ NL80211_ATTR_SUPPORT_10_MHZ,
+
+ NL80211_ATTR_OPMODE_NOTIF,
+
+ NL80211_ATTR_VENDOR_ID,
+ NL80211_ATTR_VENDOR_SUBCMD,
+ NL80211_ATTR_VENDOR_DATA,
+ NL80211_ATTR_VENDOR_EVENTS,
+
+ NL80211_ATTR_QOS_MAP,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -2224,10 +2283,9 @@ enum nl80211_band_attr {
* @NL80211_FREQUENCY_ATTR_FREQ: Frequency in MHz
* @NL80211_FREQUENCY_ATTR_DISABLED: Channel is disabled in current
* regulatory domain.
- * @NL80211_FREQUENCY_ATTR_PASSIVE_SCAN: Only passive scanning is
- * permitted on this channel in current regulatory domain.
- * @NL80211_FREQUENCY_ATTR_NO_IBSS: IBSS networks are not permitted
- * on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_NO_IR: no mechanisms that initiate radiation
+ * are permitted on this channel, this includes sending probe
+ * requests, or modes of operation that require beaconing.
* @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory
* on this channel in current regulatory domain.
* @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm
@@ -2254,8 +2312,8 @@ enum nl80211_frequency_attr {
__NL80211_FREQUENCY_ATTR_INVALID,
NL80211_FREQUENCY_ATTR_FREQ,
NL80211_FREQUENCY_ATTR_DISABLED,
- NL80211_FREQUENCY_ATTR_PASSIVE_SCAN,
- NL80211_FREQUENCY_ATTR_NO_IBSS,
+ NL80211_FREQUENCY_ATTR_NO_IR,
+ __NL80211_FREQUENCY_ATTR_NO_IBSS,
NL80211_FREQUENCY_ATTR_RADAR,
NL80211_FREQUENCY_ATTR_MAX_TX_POWER,
NL80211_FREQUENCY_ATTR_DFS_STATE,
@@ -2271,6 +2329,9 @@ enum nl80211_frequency_attr {
};
#define NL80211_FREQUENCY_ATTR_MAX_TX_POWER NL80211_FREQUENCY_ATTR_MAX_TX_POWER
+#define NL80211_FREQUENCY_ATTR_PASSIVE_SCAN NL80211_FREQUENCY_ATTR_NO_IR
+#define NL80211_FREQUENCY_ATTR_NO_IBSS NL80211_FREQUENCY_ATTR_NO_IR
+#define NL80211_FREQUENCY_ATTR_NO_IR NL80211_FREQUENCY_ATTR_NO_IR
/**
* enum nl80211_bitrate_attr - bitrate attributes
@@ -2413,8 +2474,9 @@ enum nl80211_sched_scan_match_attr {
* @NL80211_RRF_DFS: DFS support is required to be used
* @NL80211_RRF_PTP_ONLY: this is only for Point To Point links
* @NL80211_RRF_PTMP_ONLY: this is only for Point To Multi Point links
- * @NL80211_RRF_PASSIVE_SCAN: passive scan is required
- * @NL80211_RRF_NO_IBSS: no IBSS is allowed
+ * @NL80211_RRF_NO_IR: no mechanisms that initiate radiation are allowed,
+ * this includes probe requests or modes of operation that require
+ * beaconing.
*/
enum nl80211_reg_rule_flags {
NL80211_RRF_NO_OFDM = 1<<0,
@@ -2424,10 +2486,17 @@ enum nl80211_reg_rule_flags {
NL80211_RRF_DFS = 1<<4,
NL80211_RRF_PTP_ONLY = 1<<5,
NL80211_RRF_PTMP_ONLY = 1<<6,
- NL80211_RRF_PASSIVE_SCAN = 1<<7,
- NL80211_RRF_NO_IBSS = 1<<8,
+ NL80211_RRF_NO_IR = 1<<7,
+ __NL80211_RRF_NO_IBSS = 1<<8,
};
+#define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR
+#define NL80211_RRF_NO_IBSS NL80211_RRF_NO_IR
+#define NL80211_RRF_NO_IR NL80211_RRF_NO_IR
+
+/* For backport compatibility with older userspace */
+#define NL80211_RRF_NO_IR_ALL (NL80211_RRF_NO_IR | __NL80211_RRF_NO_IBSS)
+
/**
* enum nl80211_dfs_regions - regulatory DFS regions
*
@@ -3058,21 +3127,35 @@ enum nl80211_key_attributes {
* in an array of rates as defined in IEEE 802.11 7.3.2.2 (u8 values with
* 1 = 500 kbps) but without the IE length restriction (at most
* %NL80211_MAX_SUPP_RATES in a single array).
- * @NL80211_TXRATE_MCS: HT (MCS) rates allowed for TX rate selection
+ * @NL80211_TXRATE_HT: HT (MCS) rates allowed for TX rate selection
* in an array of MCS numbers.
+ * @NL80211_TXRATE_VHT: VHT rates allowed for TX rate selection,
+ * see &struct nl80211_txrate_vht
* @__NL80211_TXRATE_AFTER_LAST: internal
* @NL80211_TXRATE_MAX: highest TX rate attribute
*/
enum nl80211_tx_rate_attributes {
__NL80211_TXRATE_INVALID,
NL80211_TXRATE_LEGACY,
- NL80211_TXRATE_MCS,
+ NL80211_TXRATE_HT,
+ NL80211_TXRATE_VHT,
/* keep last */
__NL80211_TXRATE_AFTER_LAST,
NL80211_TXRATE_MAX = __NL80211_TXRATE_AFTER_LAST - 1
};
+#define NL80211_TXRATE_MCS NL80211_TXRATE_HT
+#define NL80211_VHT_NSS_MAX 8
+
+/**
+ * struct nl80211_txrate_vht - VHT MCS/NSS txrate bitmap
+ * @mcs: MCS bitmap table for each NSS (array index 0 for 1 stream, etc.)
+ */
+struct nl80211_txrate_vht {
+ __u16 mcs[NL80211_VHT_NSS_MAX];
+};
+
/**
* enum nl80211_band - Frequency band
* @NL80211_BAND_2GHZ: 2.4 GHz ISM band
@@ -3934,4 +4017,24 @@ enum nl80211_rxmgmt_flags {
NL80211_RXMGMT_FLAG_ANSWERED = 1 << 0,
};
+/*
+ * If this flag is unset, the lower 24 bits are an OUI, if set
+ * a Linux nl80211 vendor ID is used (no such IDs are allocated
+ * yet, so that's not valid so far)
+ */
+#define NL80211_VENDOR_ID_IS_LINUX 0x80000000
+
+/**
+ * struct nl80211_vendor_cmd_info - vendor command data
+ * @vendor_id: If the %NL80211_VENDOR_ID_IS_LINUX flag is clear, then the
+ * value is a 24-bit OUI; if it is set then a separately allocated ID
+ * may be used, but no such IDs are allocated yet. New IDs should be
+ * added to this file when needed.
+ * @subcmd: sub-command ID for the command
+ */
+struct nl80211_vendor_cmd_info {
+ __u32 vendor_id;
+ __u32 subcmd;
+};
+
#endif /* __LINUX_NL80211_H */