summaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAgeFilesLines
* clk: sunxi: a31: Export the MIPI PLLMaxime Ripard2020-01-041-1/+3
| | | | | | | | The MIPI PLL is used for LVDS. Make sure it's exported in the dt bindings headers. Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
* clk: sunxi-ng: a64: export CLK_CPUX clock for DVFSVasily Khoruzhick2020-01-041-1/+0
| | | | | | | Export CLK_CPUX so we can reference it in CPU node. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
* clk: sunxi-ng: add mux and pll notifiers for A64 CPU clockIcenowy Zheng2020-01-041-1/+27
| | | | | | | | | | | | | | The A64 PLL_CPU clock has the same instability if some factor changed without the PLL gated like other SoCs with sun6i-style CCU, e.g. A33, H3. Add the mux and pll notifiers for A64 CPU clock to workaround the problem. Fixes: c6a0637460c2 ("clk: sunxi-ng: Add A64 clocks") Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
* clk: sunxi-ng: r40: Export MBUS clockChen-Yu Tsai2020-01-031-4/+0
| | | | | | | | The MBUS clock needs to be referenced in the MBUS device node. Export it. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
* clk: sunxi: use of_device_get_match_dataCorentin Labbe2019-12-091-4/+2
| | | | | | | The usage of of_device_get_match_data reduce the code size a bit. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds2019-12-0841-305/+448
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking fixes from David Miller: 1) More jumbo frame fixes in r8169, from Heiner Kallweit. 2) Fix bpf build in minimal configuration, from Alexei Starovoitov. 3) Use after free in slcan driver, from Jouni Hogander. 4) Flower classifier port ranges don't work properly in the HW offload case, from Yoshiki Komachi. 5) Use after free in hns3_nic_maybe_stop_tx(), from Yunsheng Lin. 6) Out of bounds access in mqprio_dump(), from Vladyslav Tarasiuk. 7) Fix flow dissection in dsa TX path, from Alexander Lobakin. 8) Stale syncookie timestampe fixes from Guillaume Nault. [ Did an evil merge to silence a warning introduced by this pull - Linus ] * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits) r8169: fix rtl_hw_jumbo_disable for RTL8168evl net_sched: validate TCA_KIND attribute in tc_chain_tmplt_add() r8169: add missing RX enabling for WoL on RTL8125 vhost/vsock: accept only packets with the right dst_cid net: phy: dp83867: fix hfs boot in rgmii mode net: ethernet: ti: cpsw: fix extra rx interrupt inet: protect against too small mtu values. gre: refetch erspan header from skb->data after pskb_may_pull() pppoe: remove redundant BUG_ON() check in pppoe_pernet tcp: Protect accesses to .ts_recent_stamp with {READ,WRITE}_ONCE() tcp: tighten acceptance of ACKs not matching a child socket tcp: fix rejected syncookies due to stale timestamps lpc_eth: kernel BUG on remove tcp: md5: fix potential overestimation of TCP option space net: sched: allow indirect blocks to bind to clsact in TC net: core: rename indirect block ingress cb function net-sysfs: Call dev_hold always in netdev_queue_add_kobject net: dsa: fix flow dissection on Tx path net/tls: Fix return values to avoid ENOTSUPP net: avoid an indirect call in ____sys_recvmsg() ...
| * r8169: fix rtl_hw_jumbo_disable for RTL8168evlHeiner Kallweit2019-12-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | In referenced fix we removed the RTL8168e-specific jumbo config for RTL8168evl in rtl_hw_jumbo_enable(). We have to do the same in rtl_hw_jumbo_disable(). v2: fix referenced commit id Fixes: 14012c9f3bb9 ("r8169: fix jumbo configuration for RTL8168evl") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * r8169: add missing RX enabling for WoL on RTL8125Heiner Kallweit2019-12-071-1/+1
| | | | | | | | | | | | | | | | | | | | RTL8125 also requires to enable RX for WoL. v2: add missing Fixes tag Fixes: f1bce4ad2f1c ("r8169: add support for RTL8125") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * vhost/vsock: accept only packets with the right dst_cidStefano Garzarella2019-12-071-1/+3
| | | | | | | | | | | | | | | | | | | | | | When we receive a new packet from the guest, we check if the src_cid is correct, but we forgot to check the dst_cid. The host should accept only packets where dst_cid is equal to the host CID. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: phy: dp83867: fix hfs boot in rgmii modeGrygorii Strashko2019-12-071-48/+71
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The commit ef87f7da6b28 ("net: phy: dp83867: move dt parsing to probe") causes regression on TI dra71x-evm and dra72x-evm, where DP83867 PHY is used in "rgmii-id" mode - the networking stops working. Unfortunately, it's not enough to just move DT parsing code to .probe() as it depends on phydev->interface value, which is set to correct value abter the .probe() is completed and before calling .config_init(). So, RGMII configuration can't be loaded from DT. To fix and issue - move RGMII validation code to .config_init() - parse RGMII parameters in dp83867_of_init(), but consider them as optional. Fixes: ef87f7da6b28 ("net: phy: dp83867: move dt parsing to probe") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: ethernet: ti: cpsw: fix extra rx interruptGrygorii Strashko2019-12-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Now RX interrupt is triggered twice every time, because in cpsw_rx_interrupt() it is asked first and then disabled. So there will be pending interrupt always, when RX interrupt is enabled again in NAPI handler. Fix it by first disabling IRQ and then do ask. Fixes: 870915feabdc ("drivers: net: cpsw: remove disable_irq/enable_irq as irq can be masked from cpsw itself") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * pppoe: remove redundant BUG_ON() check in pppoe_pernetAditya Pakki2019-12-071-2/+0
| | | | | | | | | | | | | | | | | | Passing NULL to pppoe_pernet causes a crash via BUG_ON. Dereferencing net in net_generici() also has the same effect. This patch removes the redundant BUG_ON check on the same parameter. Signed-off-by: Aditya Pakki <pakki001@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
| * Merge tag 'mlx5-fixes-2019-12-05' of ↵David S. Miller2019-12-0610-75/+143
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2019-12-05 This series introduces some fixes to mlx5 driver. Please pull and let me know if there is any problem. For -stable v4.19: ('net/mlx5e: Query global pause state before setting prio2buffer') For -stable v5.3 ('net/mlx5e: Fix SFF 8472 eeprom length') ('net/mlx5e: Fix translation of link mode into speed') ('net/mlx5e: Fix freeing flow with kfree() and not kvfree()') ('net/mlx5e: ethtool, Fix analysis of speed setting') ('net/mlx5e: Fix TXQ indices to be sequential') ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| | * net/mlx5e: E-switch, Fix Ingress ACL groups in switchdev mode for prio tagParav Pandit2019-12-052-38/+93
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In cited commit, when prio tag mode is enabled, FTE creation fails due to missing group with valid match criteria. Hence, (a) create prio tag group metadata_prio_tag_grp when prio tag is enabled with match criteria for vlan push FTE. (b) Rename metadata_grp to metadata_allmatch_grp to reflect its purpose. Also when priority tag is enabled, delete metadata settings after deleting ingress rules, which are using it. Tide up rest of the ingress config code for unnecessary labels. Fixes: 10652f39943e ("net/mlx5: Refactor ingress acl configuration") Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Eli Britstein <elibr@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| | * net/mlx5e: ethtool, Fix analysis of speed settingAya Levin2019-12-051-10/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When setting speed to 100G via ethtool (AN is set to off), only 25G*4 is configured while the user, who has an advanced HW which supports extended PTYS, expects also 50G*2 to be configured. With this patch, when extended PTYS mode is available, configure PTYS via extended fields. Fixes: 4b95840a6ced ("net/mlx5e: Fix matching of speed to PRM link modes") Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| | * net/mlx5e: Fix translation of link mode into speedAya Levin2019-12-051-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a missing value in translation of PTYS ext_eth_proto_oper to its corresponding speed. When ext_eth_proto_oper bit 10 is set, ethtool shows unknown speed. With this fix, ethtool shows speed is 100G as expected. Fixes: a08b4ed1373d ("net/mlx5: Add support to ext_* fields introduced in Port Type and Speed register") Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| | * net/mlx5e: Fix free peer_flow when refcount is 0Roi Dayan2019-12-051-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It could be neigh update flow took a refcount on peer flow so sometimes we cannot release peer flow even if parent flow is being freed now. Fixes: 5a7e5bcb663d ("net/mlx5e: Extend tc flow struct with reference counter") Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Eli Britstein <elibr@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| | * net/mlx5e: Fix freeing flow with kfree() and not kvfree()Roi Dayan2019-12-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Flows are allocated with kzalloc() so free with kfree(). Fixes: 04de7dda7394 ("net/mlx5e: Infrastructure for duplicated offloading of TC flows") Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Eli Britstein <elibr@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| | * net/mlx5e: Fix SFF 8472 eeprom lengthEran Ben Elisha2019-12-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SFF 8472 eeprom length is 512 bytes. Fix module info return value to support 512 bytes read. Fixes: ace329f4ab3b ("net/mlx5e: ethtool, Remove unsupported SFP EEPROM high pages query") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| | * net/mlx5e: Query global pause state before setting prio2bufferHuy Nguyen2019-12-051-2/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the user changes prio2buffer mapping while global pause is enabled, mlx5 driver incorrectly sets all active buffers (buffer that has at least one priority mapped) to lossy. Solution: If global pause is enabled, set all the active buffers to lossless in prio2buffer command. Also, add error message when buffer size is not enough to meet xoff threshold. Fixes: 0696d60853d5 ("net/mlx5e: Receive buffer configuration") Signed-off-by: Huy Nguyen <huyn@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| | * net/mlx5e: Fix TXQ indices to be sequentialEran Ben Elisha2019-12-054-22/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Cited patch changed (channel index, tc) => (TXQ index) mapping to be a static one, in order to keep indices consistent when changing number of channels or TCs. For 32 channels (OOB) and 8 TCs, real num of TXQs is 256. When reducing the amount of channels to 8, the real num of TXQs will be changed to 64. This indices method is buggy: - Channel #0, TC 3, the TXQ index is 96. - Index 8 is not valid, as there is no such TXQ from driver perspective (As it represents channel #8, TC 0, which is not valid with the above configuration). As part of driver's select queue, it calls netdev_pick_tx which returns an index in the range of real number of TXQs. Depends on the return value, with the examples above, driver could have returned index larger than the real number of tx queues, or crash the kernel as it tries to read invalid address of SQ which was not allocated. Fix that by allocating sequential TXQ indices, and hold a new mapping between (channel index, tc) => (real TXQ index). This mapping will be updated as part of priv channels activation, and is used in mlx5e_select_queue to find the selected queue index. The existing indices mapping (channel_tc2txq) is no longer needed, as it is used only for statistics structures and can be calculated on run time. Delete its definintion and updates. Fixes: 8bfaf07f7806 ("net/mlx5e: Present SW stats when state is not opened") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| * | lpc_eth: kernel BUG on removeBruno Carneiro da Cunha2019-12-061-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We may have found a bug in the nxp/lpc_eth.c driver. The function platform_set_drvdata() is called twice, the second time it is called, in lpc_mii_init(), it overwrites the struct net_device which should be at pdev->dev->driver_data with pldat->mii_bus. When trying to remove the driver, in lpc_eth_drv_remove(), platform_get_drvdata() will return the pldat->mii_bus pointer and try to use it as a struct net_device pointer. This causes unregister_netdev to segfault and generate a kernel BUG. Is this reproducible? Signed-off-by: Daniel Martinez <linux@danielsmartinez.com> Signed-off-by: Bruno Carneiro da Cunha <brunocarneirodacunha@usp.br> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | phy: mdio-thunder: add missed pci_release_regions in removeChuhong Yuan2019-12-061-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | The driver forgets to call pci_release_regions() in remove like that in probe failure. Add the missed call to fix it. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net: stmmac: reset Tx desc base address before restarting TxJongsung Kim2019-12-061-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Refer to the databook of DesignWare Cores Ethernet MAC Universal: 6.2.1.5 Register 4 (Transmit Descriptor List Address Register If this register is not changed when the ST bit is set to 0, then the DMA takes the descriptor address where it was stopped earlier. The stmmac_tx_err() does zero indices to Tx descriptors, but does not reset HW current Tx descriptor address. To fix inconsistency, the base address of the Tx descriptors should be rewritten before restarting Tx. Signed-off-by: Jongsung Kim <neidhard.kim@lge.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | enetc: disable EEE autoneg by defaultYangbo Lu2019-12-061-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The EEE support has not been enabled on ENETC, but it may connect to a PHY which supports EEE and advertises EEE by default, while its link partner also advertises EEE. If this happens, the PHY enters low power mode when the traffic rate is low and causes packet loss. This patch disables EEE advertisement by default for any PHY that ENETC connects to, to prevent the above unwanted outcome. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | ppp: fix out-of-bounds access in bpf_prog_create()Eric Biggers2019-12-051-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sock_fprog_kern::len is in units of struct sock_filter, not bytes. Fixes: 3e859adf3643 ("compat_ioctl: unify copy-in of ppp filters") Reported-by: syzbot+eb853b51b10f1befa0b7@syzkaller.appspotmail.com Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net: hns3: fix VF ID issue for setting VF VLANJian Shen2019-12-051-12/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously, when set VF VLAN with command "ip link set <pf name> vf <vf id> vlan <vlan id>", the VF ID 0 is handled as PF incorrectly, which should be the first VF. This patch fixes it. Fixes: 21e043cd8124 ("net: hns3: fix set port based VLAN for PF") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net: hns3: fix a use after free problem in hns3_nic_maybe_stop_tx()Yunsheng Lin2019-12-051-13/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, hns3_nic_maybe_stop_tx() uses skb_copy() to linearize a SKB if the BD num required by the SKB does not meet the hardware limitation, and it linearizes the SKB by allocating a new linearized SKB and freeing the old SKB, if hns3_nic_maybe_stop_tx() returns -EBUSY because there are no enough space in the ring to send the linearized skb to hardware, the sch_direct_xmit() still hold reference to old SKB and try to retransmit the old SKB when dev_hard_start_xmit() return TX_BUSY, which may cause use after freed problem. This patch fixes it by using __skb_linearize() to linearize the SKB in hns3_nic_maybe_stop_tx(). Fixes: 51e8439f3496 ("net: hns3: add 8 BD limit for tx flow") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net: hns3: fix for TX queue not restarted problemYunsheng Lin2019-12-051-12/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is timing window between ring_space checking and netif_stop_subqueue when transmiting a SKB, and the TX BD cleaning may be executed during the time window, which may caused TX queue not restarted problem. This patch fixes it by rechecking the ring_space after netif_stop_subqueue to make sure TX queue is restarted. Also, the ring->next_to_clean is updated even when pkts is zero, because all the TX BD cleaned may be non-SKB, so it needs to check if TX queue need to be restarted. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net: ethernet: ti: cpsw_switchdev: fix unmet direct dependencies detected ↵Grygorii Strashko2019-12-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | for NET_SWITCHDEV Replace "select NET_SWITCHDEV" vs "depends on NET_SWITCHDEV" to fix Kconfig warning with CONFIG_COMPILE_TEST=y WARNING: unmet direct dependencies detected for NET_SWITCHDEV Depends on [n]: NET [=y] && INET [=n] Selected by [y]: - TI_CPSW_SWITCHDEV [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_TI [=y] && (ARCH_DAVINCI || ARCH_OMAP2PLUS || COMPILE_TEST [=y]) because TI_CPSW_SWITCHDEV blindly selects NET_SWITCHDEV even though INET is not set/enabled, while NET_SWITCHDEV depends on INET. Reported-by: Randy Dunlap <rdunlap@infradead.org> Fixes: ed3525eda4c4 ("net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by: David S. Miller <davem@davemloft.net>
| * | s390/qeth: fix dangling IO buffers after halt/clearJulian Wiedmann2019-12-055-46/+67
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The cio layer's intparm logic does not align itself well with how qeth manages cmd IOs. When an active IO gets terminated via halt/clear, the corresponding IRQ's intparm does not reflect the cmd buffer but rather the intparm that was passed to ccw_device_halt() / ccw_device_clear(). This behaviour was recently clarified in commit b91d9e67e50b ("s390/cio: fix intparm documentation"). As a result, qeth_irq() currently doesn't cancel a cmd that was terminated via halt/clear. This primarily causes us to leak card->read_cmd after the qeth device is removed, since our IO path still holds a refcount for this cmd. For qeth this means that we need to keep track of which IO is pending on a device ('active_cmd'), and use this as the intparm when calling halt/clear. Otherwise qeth_irq() can't match the subsequent IRQ to its cmd buffer. Since we now keep track of the _expected_ intparm, we can also detect any mismatch; this would constitute a bug somewhere in the lower layers. In this case cancel the active cmd - we effectively "lost" the IRQ and should not expect any further notification for this IO. Fixes: 405548959cc7 ("s390/qeth: add support for dynamically allocated cmds") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | s390/qeth: ensure linear access to packet headersJulian Wiedmann2019-12-051-33/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the RX path builds non-linear skbs, the packet headers can currently spill over into page fragments. Depending on the packet type and what fields we need to access in the headers, this could cause us to go past the end of skb->data. So for non-linear packets, copy precisely the length of the necessary headers ('linear_len') into skb->data. And don't copy more, upper-level protocols will peel whatever additional packet headers they need. Fixes: 4a71df50047f ("qeth: new qeth device driver") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | s390/qeth: guard against runt packetsJulian Wiedmann2019-12-053-6/+23
| |/ | | | | | | | | | | | | | | | | | | | | | | | | Depending on a packet's type, the RX path needs to access fields in the packet headers and thus requires a minimum packet length. Enforce this length when building the skb. On the other hand a single runt packet is no reason to drop the whole RX buffer. So just skip it, and continue processing on the next packet. Fixes: 4a71df50047f ("qeth: new qeth device driver") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: thunderx: start phy before starting autonegotiationMian Yousaf Kaukab2019-12-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 2b3e88ea6528 ("net: phy: improve phy state checking") phy_start_aneg() expects phy state to be >= PHY_UP. Call phy_start() before calling phy_start_aneg() during probe so that autonegotiation is initiated. As phy_start() takes care of calling phy_start_aneg(), drop the explicit call to phy_start_aneg(). Network fails without this patch on Octeon TX. Fixes: 2b3e88ea6528 ("net: phy: improve phy state checking") Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: sfp: fix hwmonRussell King2019-12-041-9/+4
| | | | | | | | | | | | | | | | | | | | The referenced commit below allowed more than one hwmon device to be created per SFP, which is definitely not what we want. Avoid this by only creating the hwmon device just as we transition to WAITDEV state. Fixes: 139d3a212a1f ("net: sfp: allow modules with slow diagnostics to probe") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: sfp: fix unbindRussell King2019-12-041-0/+4
| | | | | | | | | | | | | | | | | | | | When unbinding, we don't correctly tear down the module state, leaving (for example) the hwmon registration behind. Ensure everything is properly removed by sending a remove event at unbind. Fixes: 6b0da5c9c1a3 ("net: sfp: track upstream's attachment state in state machine") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ionic: keep users rss hash across lif resetShannon Nelson2019-12-041-6/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the user has specified their own RSS hash key, don't lose it across queue resets such as DOWN/UP, MTU change, and number of channels change. This is fixed by moving the key initialization to a little earlier in the lif creation. Also, let's clean up the RSS config a little better on the way down by setting it all to 0. Fixes: aa3198819bea ("ionic: Add RSS support") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: ipv6_stub: use ip6_dst_lookup_flow instead of ip6_dst_lookupSabrina Dubroca2019-12-045-17/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ipv6_stub uses the ip6_dst_lookup function to allow other modules to perform IPv6 lookups. However, this function skips the XFRM layer entirely. All users of ipv6_stub->ip6_dst_lookup use ip_route_output_flow (via the ip_route_output_key and ip_route_output helpers) for their IPv4 lookups, which calls xfrm_lookup_route(). This patch fixes this inconsistent behavior by switching the stub to ip6_dst_lookup_flow, which also calls xfrm_lookup_route(). This requires some changes in all the callers, as these two functions take different arguments and have different return types. Fixes: 5f81bd2e5d80 ("ipv6: export a stub for IPv6 symbols used by vxlan") Reported-by: Xiumei Mu <xmu@redhat.com> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: mscc: ocelot: unregister the PTP clock on deinitVladimir Oltean2019-12-031-4/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently a switch driver deinit frees the regmaps, but the PTP clock is still out there, available to user space via /dev/ptpN. Any PTP operation is a ticking time bomb, since it will attempt to use the freed regmaps and thus trigger kernel panics: [ 4.291746] fsl_enetc 0000:00:00.2 eth1: error -22 setting up slave phy [ 4.291871] mscc_felix 0000:00:00.5: Failed to register DSA switch: -22 [ 4.308666] mscc_felix: probe of 0000:00:00.5 failed with error -22 [ 6.358270] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000088 [ 6.367090] Mem abort info: [ 6.369888] ESR = 0x96000046 [ 6.369891] EC = 0x25: DABT (current EL), IL = 32 bits [ 6.369892] SET = 0, FnV = 0 [ 6.369894] EA = 0, S1PTW = 0 [ 6.369895] Data abort info: [ 6.369897] ISV = 0, ISS = 0x00000046 [ 6.369899] CM = 0, WnR = 1 [ 6.369902] user pgtable: 4k pages, 48-bit VAs, pgdp=00000020d58c7000 [ 6.369904] [0000000000000088] pgd=00000020d5912003, pud=00000020d5915003, pmd=0000000000000000 [ 6.369914] Internal error: Oops: 96000046 [#1] PREEMPT SMP [ 6.420443] Modules linked in: [ 6.423506] CPU: 1 PID: 262 Comm: phc_ctl Not tainted 5.4.0-03625-gb7b2a5dadd7f #204 [ 6.431273] Hardware name: LS1028A RDB Board (DT) [ 6.435989] pstate: 40000085 (nZcv daIf -PAN -UAO) [ 6.440802] pc : css_release+0x24/0x58 [ 6.444561] lr : regmap_read+0x40/0x78 [ 6.448316] sp : ffff800010513cc0 [ 6.451636] x29: ffff800010513cc0 x28: ffff002055873040 [ 6.456963] x27: 0000000000000000 x26: 0000000000000000 [ 6.462289] x25: 0000000000000000 x24: 0000000000000000 [ 6.467617] x23: 0000000000000000 x22: 0000000000000080 [ 6.472944] x21: ffff800010513d44 x20: 0000000000000080 [ 6.478270] x19: 0000000000000000 x18: 0000000000000000 [ 6.483596] x17: 0000000000000000 x16: 0000000000000000 [ 6.488921] x15: 0000000000000000 x14: 0000000000000000 [ 6.494247] x13: 0000000000000000 x12: 0000000000000000 [ 6.499573] x11: 0000000000000000 x10: 0000000000000000 [ 6.504899] x9 : 0000000000000000 x8 : 0000000000000000 [ 6.510225] x7 : 0000000000000000 x6 : ffff800010513cf0 [ 6.515550] x5 : 0000000000000000 x4 : 0000000fffffffe0 [ 6.520876] x3 : 0000000000000088 x2 : ffff800010513d44 [ 6.526202] x1 : ffffcada668ea000 x0 : ffffcada64d8b0c0 [ 6.531528] Call trace: [ 6.533977] css_release+0x24/0x58 [ 6.537385] regmap_read+0x40/0x78 [ 6.540795] __ocelot_read_ix+0x6c/0xa0 [ 6.544641] ocelot_ptp_gettime64+0x4c/0x110 [ 6.548921] ptp_clock_gettime+0x4c/0x58 [ 6.552853] pc_clock_gettime+0x5c/0xa8 [ 6.556699] __arm64_sys_clock_gettime+0x68/0xc8 [ 6.561331] el0_svc_common.constprop.2+0x7c/0x178 [ 6.566133] el0_svc_handler+0x34/0xa0 [ 6.569891] el0_sync_handler+0x114/0x1d0 [ 6.573908] el0_sync+0x140/0x180 [ 6.577232] Code: d503201f b00119a1 91022263 b27b7be4 (f9004663) [ 6.583349] ---[ end trace d196b9b14cdae2da ]--- [ 6.587977] Kernel panic - not syncing: Fatal exception [ 6.593216] SMP: stopping secondary CPUs [ 6.597151] Kernel Offset: 0x4ada54400000 from 0xffff800010000000 [ 6.603261] PHYS_OFFSET: 0xffffd0a7c0000000 [ 6.607454] CPU features: 0x10002,21806008 [ 6.611558] Memory Limit: none And now that ocelot->ptp_clock is checked at exit, prevent a potential error where ptp_clock_register returned a pointer-encoded error, which we are keeping in the ocelot private data structure. So now, ocelot->ptp_clock is now either NULL or a valid pointer. Fixes: 4e3b0468e6d7 ("net: mscc: PTP Hardware Clock (PHC) support") Cc: Antoine Tenart <antoine.tenart@bootlin.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * can: xilinx_can: Fix usage of skb memorySrinivas Neeli2019-12-031-12/+13
| | | | | | | | | | | | | | | | | | | | | | As per linux can framework, driver not allowed to touch the skb memory after can_put_echo_skb() call. This patch fixes the same. https://www.spinics.net/lists/linux-can/msg02199.html Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com> Reviewed-by: Appana Durga Kedareswara Rao <appana.durga.rao@xilinx.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
| * can: xilinx_can: skip error message on deferred probeVenkatesh Yadav Abbarapu2019-12-031-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the CAN bus clock is provided from the clock wizard, clock wizard driver may not be available when can driver probes resulting to the error message "bus clock not found error". As this error message is not very useful to the end user, skip printing in the case of deferred probe. Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com> Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Appana Durga Kedareswara Rao <appana.durga.rao@xilinx.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
| * can: ucan: fix non-atomic allocation in completion handlerJohan Hovold2019-12-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | USB completion handlers are called in atomic context and must specifically not allocate memory using GFP_KERNEL. Fixes: 9f2d3eae88d2 ("can: ucan: add driver for Theobroma Systems UCAN devices") Cc: stable <stable@vger.kernel.org> # 4.19 Cc: Jakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com> Cc: Martin Elshuber <martin.elshuber@theobroma-systems.com> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
| * can: slcan: Fix use-after-free Read in slcan_openJouni Hogander2019-12-031-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Slcan_open doesn't clean-up device which registration failed from the slcan_devs device list. On next open this list is iterated and freed device is accessed. Fix this by calling slc_free_netdev in error path. Driver/net/can/slcan.c is derived from slip.c. Use-after-free error was identified in slip_open by syzboz. Same bug is in slcan.c. Here is the trace from the Syzbot slip report: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374 __kasan_report.cold+0x1b/0x41 mm/kasan/report.c:506 kasan_report+0x12/0x20 mm/kasan/common.c:634 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:132 sl_sync drivers/net/slip/slip.c:725 [inline] slip_open+0xecd/0x11b7 drivers/net/slip/slip.c:801 tty_ldisc_open.isra.0+0xa3/0x110 drivers/tty/tty_ldisc.c:469 tty_set_ldisc+0x30e/0x6b0 drivers/tty/tty_ldisc.c:596 tiocsetd drivers/tty/tty_io.c:2334 [inline] tty_ioctl+0xe8d/0x14f0 drivers/tty/tty_io.c:2594 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:509 [inline] do_vfs_ioctl+0xdb6/0x13e0 fs/ioctl.c:696 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713 __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl fs/ioctl.c:718 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718 do_syscall_64+0xfa/0x760 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: ed50e1600b44 ("slcan: Fix memory leak in error path") Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: David Miller <davem@davemloft.net> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Jouni Hogander <jouni.hogander@unikie.com> Cc: linux-stable <stable@vger.kernel.org> # >= v5.4 Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
* | Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds2019-12-0811-32/+35
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull more SCSI updates from James Bottomley: "Eleven patches, all in drivers (no core changes) that are either minor cleanups or small fixes. They were late arriving, but still safe for -rc1" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: MAINTAINERS: Add the linux-scsi mailing list to the ISCSI entry scsi: megaraid_sas: Make poll_aen_lock static scsi: sd_zbc: Improve report zones error printout scsi: qla2xxx: Fix qla2x00_request_irqs() for MSI scsi: qla2xxx: unregister ports after GPN_FT failure scsi: qla2xxx: fix rports not being mark as lost in sync fabric scan scsi: pm80xx: Remove unused include of linux/version.h scsi: pm80xx: fix logic to break out of loop when register value is 2 or 3 scsi: scsi_transport_sas: Fix memory leak when removing devices scsi: lpfc: size cpu map by last cpu id set scsi: ibmvscsi_tgt: Remove unneeded variable rc
| * | scsi: megaraid_sas: Make poll_aen_lock staticYueHaibing2019-11-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix sparse warning: drivers/scsi/megaraid/megaraid_sas_base.c:187:12: warning: symbol 'poll_aen_lock' was not declared. Should it be static? Link: https://lore.kernel.org/r/20191125144454.22680-1-yuehaibing@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * | scsi: sd_zbc: Improve report zones error printoutDamien Le Moal2019-11-263-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the case of a report zones command failure, instead of simply printing the host_byte and driver_byte values returned, print a message that is more human readable and useful, adding sense codes too. To do so, use the already defined sd_print_sense_hdr() and sd_print_result() functions by moving the declaration of these functions into sd.h. Link: https://lore.kernel.org/r/20191125070518.951717-1-damien.lemoal@wdc.com Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * | scsi: qla2xxx: Fix qla2x00_request_irqs() for MSIHuacai Chen2019-11-261-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 4fa183455988 ("scsi: qla2xxx: Utilize pci_alloc_irq_vectors/ pci_free_irq_vectors calls.") use pci_alloc_irq_vectors() to replace pci_enable_msi() but it didn't handle the return value correctly. This bug make qla2x00 always fail to setup MSI if MSI-X fail, so fix it. BTW, improve the log message of return value in qla2x00_request_irqs() to avoid confusion. Fixes: 4fa183455988 ("scsi: qla2xxx: Utilize pci_alloc_irq_vectors/pci_free_irq_vectors calls.") Cc: Michael Hernandez <michael.hernandez@cavium.com> Link: https://lore.kernel.org/r/1574314847-14280-1-git-send-email-chenhc@lemote.com Signed-off-by: Huacai Chen <chenhc@lemote.com> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * | scsi: qla2xxx: unregister ports after GPN_FT failureMartin Wilck2019-11-261-2/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When ports are lost due to unzoning them, and the initiator port is not part of any more zones, the GPN_FT command used for the fabric scan may fail. In this case, the current code simply gives up after a few retries. But if the zone is gone, all rports should actually be marked as lost. Fix this by jumping to the code that handles logout after GNN_FT after scan retries are exhausted. Fixes: f352eeb75419 ("scsi: qla2xxx: Add ability to use GPNFT/GNNFT for RSCN handling") Link: https://lore.kernel.org/r/20191122221912.20100-3-martin.wilck@suse.com Tested-by: Jason Orendorf <orendorf@hpe.com> Signed-off-by: Martin Wilck <mwilck@suse.com> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * | scsi: qla2xxx: fix rports not being mark as lost in sync fabric scanMartin Wilck2019-11-261-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In qla2x00_find_all_fabric_devs(), fcport->flags & FCF_LOGIN_NEEDED is a necessary condition for logging into new rports, but not for dropping lost ones. Fixes: 726b85487067 ("qla2xxx: Add framework for async fabric discovery") Link: https://lore.kernel.org/r/20191122221912.20100-2-martin.wilck@suse.com Tested-by: David Bond <dbond@suse.com> Signed-off-by: Martin Wilck <mwilck@suse.com> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * | scsi: pm80xx: Remove unused include of linux/version.hYueHaibing2019-11-261-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | Remove #include <linux/version.h>. Don't need it. Link: https://lore.kernel.org/r/20191122020911.33269-1-yuehaibing@huawei.com Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-13 02:35:26 +0000