From 2e0733bc5a15a33f72ec2c323915f72cc65d8960 Mon Sep 17 00:00:00 2001 From: Lukas Wunner Date: Thu, 29 Nov 2018 16:45:24 +0100 Subject: spi: bcm2835: Speed up FIFO access if fill level is known MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The RX and TX FIFO of the BCM2835 SPI master each accommodate 64 bytes (16 32-bit dwords). The CS register provides hints on their fill level: "Bit 19 RXR - RX FIFO needs Reading ([¾] full) 0 = RX FIFO is less than [¾] full (or not active TA = 0). 1 = RX FIFO is [¾] or more full. Cleared by reading sufficient data from the RX FIFO or setting TA to 0." "Bit 16 DONE - Transfer Done 0 = Transfer is in progress (or not active TA = 0). 1 = Transfer is complete. Cleared by writing more data to the TX FIFO or setting TA to 0." "If DONE is set [...], write up to 16 [dwords] to SPI_FIFO. [...] If RXR is set read 12 [dwords] data from SPI_FIFO." [Source: Pages 153, 154 and 158 of https://www.raspberrypi.org/app/uploads/2012/02/BCM2835-ARM-Peripherals.pdf Note: The spec is missing the "¾" character, presumably due to copy-pasting from a different charset. It also incorrectly refers to 16 and 12 "bytes" instead of 32-bit dwords.] In short, the RXR bit indicates that 48 bytes can be read and the DONE bit indicates 64 bytes can be written. Leverage this knowledge to read or write bytes blindly to the FIFO, without polling whether data can be read or free space is available to write. Moreover, when a transfer is starting, the TX FIFO is known to be empty, likewise allowing a blind write of 64 bytes. This cuts the number of bus accesses in half if the fill level is known. Also, the (posted) write accesses can be pipelined on the AXI bus since they are no longer interleaved with (non-posted) reads. bcm2835_spi_transfer_one_poll() switches to interrupt mode when a time limit is exceeded by calling bcm2835_spi_transfer_one_irq(). The TX FIFO may contain data in this case, but is known to be empty when the function is called from bcm2835_spi_transfer_one(). Hence only blindly fill the TX FIFO in the latter case but not the former. Signed-off-by: Lukas Wunner Tested-by: Eric Anholt Cc: Frank Pavlic Cc: Martin Sperl Cc: Noralf Trønnes Signed-off-by: Mark Brown --- drivers/spi/spi-bcm2835.c | 64 ++++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 60 insertions(+), 4 deletions(-) diff --git a/drivers/spi/spi-bcm2835.c b/drivers/spi/spi-bcm2835.c index 8c121b3374dd..5af4cf74392c 100644 --- a/drivers/spi/spi-bcm2835.c +++ b/drivers/spi/spi-bcm2835.c @@ -71,6 +71,8 @@ #define BCM2835_SPI_CS_CS_10 0x00000002 #define BCM2835_SPI_CS_CS_01 0x00000001 +#define BCM2835_SPI_FIFO_SIZE 64 +#define BCM2835_SPI_FIFO_SIZE_3_4 48 #define BCM2835_SPI_POLLING_LIMIT_US 30 #define BCM2835_SPI_POLLING_JIFFIES 2 #define BCM2835_SPI_DMA_MIN_LENGTH 96 @@ -216,6 +218,45 @@ static inline void bcm2835_wait_tx_fifo_empty(struct bcm2835_spi *bs) cpu_relax(); } +/** + * bcm2835_rd_fifo_blind() - blindly read up to @count bytes from RX FIFO + * @bs: BCM2835 SPI controller + * @count: bytes available for reading in RX FIFO + */ +static inline void bcm2835_rd_fifo_blind(struct bcm2835_spi *bs, int count) +{ + u8 val; + + count = min(count, bs->rx_len); + bs->rx_len -= count; + + while (count) { + val = bcm2835_rd(bs, BCM2835_SPI_FIFO); + if (bs->rx_buf) + *bs->rx_buf++ = val; + count--; + } +} + +/** + * bcm2835_wr_fifo_blind() - blindly write up to @count bytes to TX FIFO + * @bs: BCM2835 SPI controller + * @count: bytes available for writing in TX FIFO + */ +static inline void bcm2835_wr_fifo_blind(struct bcm2835_spi *bs, int count) +{ + u8 val; + + count = min(count, bs->tx_len); + bs->tx_len -= count; + + while (count) { + val = bs->tx_buf ? *bs->tx_buf++ : 0; + bcm2835_wr(bs, BCM2835_SPI_FIFO, val); + count--; + } +} + static void bcm2835_spi_reset_hw(struct spi_master *master) { struct bcm2835_spi *bs = spi_master_get_devdata(master); @@ -239,6 +280,19 @@ static irqreturn_t bcm2835_spi_interrupt(int irq, void *dev_id) { struct spi_master *master = dev_id; struct bcm2835_spi *bs = spi_master_get_devdata(master); + u32 cs = bcm2835_rd(bs, BCM2835_SPI_CS); + + /* + * An interrupt is signaled either if DONE is set (TX FIFO empty) + * or if RXR is set (RX FIFO >= ¾ full). + */ + if (cs & BCM2835_SPI_CS_RXF) + bcm2835_rd_fifo_blind(bs, BCM2835_SPI_FIFO_SIZE); + else if (cs & BCM2835_SPI_CS_RXR) + bcm2835_rd_fifo_blind(bs, BCM2835_SPI_FIFO_SIZE_3_4); + + if (bs->tx_len && cs & BCM2835_SPI_CS_DONE) + bcm2835_wr_fifo_blind(bs, BCM2835_SPI_FIFO_SIZE); /* Read as many bytes as possible from FIFO */ bcm2835_rd_fifo(bs); @@ -258,7 +312,7 @@ static irqreturn_t bcm2835_spi_interrupt(int irq, void *dev_id) static int bcm2835_spi_transfer_one_irq(struct spi_master *master, struct spi_device *spi, struct spi_transfer *tfr, - u32 cs) + u32 cs, bool fifo_empty) { struct bcm2835_spi *bs = spi_master_get_devdata(master); @@ -269,6 +323,8 @@ static int bcm2835_spi_transfer_one_irq(struct spi_master *master, bcm2835_wr(bs, BCM2835_SPI_CS, cs | BCM2835_SPI_CS_TA); /* fill TX FIFO as much as possible */ + if (fifo_empty) + bcm2835_wr_fifo_blind(bs, BCM2835_SPI_FIFO_SIZE); bcm2835_wr_fifo(bs); /* enable interrupts */ @@ -682,7 +738,7 @@ static int bcm2835_spi_transfer_one_poll(struct spi_master *master, * if we are interrupted here, then the data is * getting transferred by the HW while we are interrupted */ - bcm2835_wr_fifo(bs); + bcm2835_wr_fifo_blind(bs, BCM2835_SPI_FIFO_SIZE); /* set the timeout */ timeout = jiffies + BCM2835_SPI_POLLING_JIFFIES; @@ -705,7 +761,7 @@ static int bcm2835_spi_transfer_one_poll(struct spi_master *master, bs->tx_len, bs->rx_len); /* fall back to interrupt mode */ return bcm2835_spi_transfer_one_irq(master, spi, - tfr, cs); + tfr, cs, false); } } @@ -779,7 +835,7 @@ static int bcm2835_spi_transfer_one(struct spi_master *master, return bcm2835_spi_transfer_one_dma(master, spi, tfr, cs); /* run in interrupt-mode */ - return bcm2835_spi_transfer_one_irq(master, spi, tfr, cs); + return bcm2835_spi_transfer_one_irq(master, spi, tfr, cs, true); } static int bcm2835_spi_prepare_message(struct spi_master *master, -- cgit v1.2.3