From 65388dad1bbb51a4eb6cc91b9fa865b57646fb67 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 27 Jun 2019 16:31:35 -0300 Subject: docs: serial: move it to the driver-api The contents of this directory is mostly driver-api stuff. Signed-off-by: Mauro Carvalho Chehab --- Documentation/driver-api/index.rst | 1 + Documentation/driver-api/serial/cyclades_z.rst | 11 + Documentation/driver-api/serial/driver.rst | 549 ++++++++++++++++++ Documentation/driver-api/serial/index.rst | 32 ++ Documentation/driver-api/serial/moxa-smartio.rst | 615 +++++++++++++++++++++ Documentation/driver-api/serial/n_gsm.rst | 103 ++++ Documentation/driver-api/serial/rocket.rst | 185 +++++++ Documentation/driver-api/serial/serial-iso7816.rst | 90 +++ Documentation/driver-api/serial/serial-rs485.rst | 103 ++++ Documentation/driver-api/serial/tty.rst | 328 +++++++++++ Documentation/serial/cyclades_z.rst | 11 - Documentation/serial/driver.rst | 549 ------------------ Documentation/serial/index.rst | 32 -- Documentation/serial/moxa-smartio.rst | 615 --------------------- Documentation/serial/n_gsm.rst | 103 ---- Documentation/serial/rocket.rst | 185 ------- Documentation/serial/serial-iso7816.rst | 90 --- Documentation/serial/serial-rs485.rst | 103 ---- Documentation/serial/tty.rst | 328 ----------- MAINTAINERS | 6 +- drivers/tty/Kconfig | 4 +- drivers/tty/serial/ucc_uart.c | 2 +- include/linux/serial_core.h | 2 +- 23 files changed, 2024 insertions(+), 2023 deletions(-) create mode 100644 Documentation/driver-api/serial/cyclades_z.rst create mode 100644 Documentation/driver-api/serial/driver.rst create mode 100644 Documentation/driver-api/serial/index.rst create mode 100644 Documentation/driver-api/serial/moxa-smartio.rst create mode 100644 Documentation/driver-api/serial/n_gsm.rst create mode 100644 Documentation/driver-api/serial/rocket.rst create mode 100644 Documentation/driver-api/serial/serial-iso7816.rst create mode 100644 Documentation/driver-api/serial/serial-rs485.rst create mode 100644 Documentation/driver-api/serial/tty.rst delete mode 100644 Documentation/serial/cyclades_z.rst delete mode 100644 Documentation/serial/driver.rst delete mode 100644 Documentation/serial/index.rst delete mode 100644 Documentation/serial/moxa-smartio.rst delete mode 100644 Documentation/serial/n_gsm.rst delete mode 100644 Documentation/serial/rocket.rst delete mode 100644 Documentation/serial/serial-iso7816.rst delete mode 100644 Documentation/serial/serial-rs485.rst delete mode 100644 Documentation/serial/tty.rst diff --git a/Documentation/driver-api/index.rst b/Documentation/driver-api/index.rst index 1dde9692075c..cf39b8f9d0f9 100644 --- a/Documentation/driver-api/index.rst +++ b/Documentation/driver-api/index.rst @@ -88,6 +88,7 @@ available subsections can be seen below. pti_intel_mid pwm rfkill + serial/index sgi-ioc4 sm501 smsc_ece1099 diff --git a/Documentation/driver-api/serial/cyclades_z.rst b/Documentation/driver-api/serial/cyclades_z.rst new file mode 100644 index 000000000000..532ff67e2f1c --- /dev/null +++ b/Documentation/driver-api/serial/cyclades_z.rst @@ -0,0 +1,11 @@ +================ +Cyclades-Z notes +================ + +The Cyclades-Z must have firmware loaded onto the card before it will +operate. This operation should be performed during system startup, + +The firmware, loader program and the latest device driver code are +available from Cyclades at + + ftp://ftp.cyclades.com/pub/cyclades/cyclades-z/linux/ diff --git a/Documentation/driver-api/serial/driver.rst b/Documentation/driver-api/serial/driver.rst new file mode 100644 index 000000000000..31bd4e16fb1f --- /dev/null +++ b/Documentation/driver-api/serial/driver.rst @@ -0,0 +1,549 @@ +==================== +Low Level Serial API +==================== + + +This document is meant as a brief overview of some aspects of the new serial +driver. It is not complete, any questions you have should be directed to + + +The reference implementation is contained within amba-pl011.c. + + + +Low Level Serial Hardware Driver +-------------------------------- + +The low level serial hardware driver is responsible for supplying port +information (defined by uart_port) and a set of control methods (defined +by uart_ops) to the core serial driver. The low level driver is also +responsible for handling interrupts for the port, and providing any +console support. + + +Console Support +--------------- + +The serial core provides a few helper functions. This includes identifing +the correct port structure (via uart_get_console) and decoding command line +arguments (uart_parse_options). + +There is also a helper function (uart_console_write) which performs a +character by character write, translating newlines to CRLF sequences. +Driver writers are recommended to use this function rather than implementing +their own version. + + +Locking +------- + +It is the responsibility of the low level hardware driver to perform the +necessary locking using port->lock. There are some exceptions (which +are described in the uart_ops listing below.) + +There are two locks. A per-port spinlock, and an overall semaphore. + +From the core driver perspective, the port->lock locks the following +data:: + + port->mctrl + port->icount + port->state->xmit.head (circ_buf->head) + port->state->xmit.tail (circ_buf->tail) + +The low level driver is free to use this lock to provide any additional +locking. + +The port_sem semaphore is used to protect against ports being added/ +removed or reconfigured at inappropriate times. Since v2.6.27, this +semaphore has been the 'mutex' member of the tty_port struct, and +commonly referred to as the port mutex. + + +uart_ops +-------- + +The uart_ops structure is the main interface between serial_core and the +hardware specific driver. It contains all the methods to control the +hardware. + + tx_empty(port) + This function tests whether the transmitter fifo and shifter + for the port described by 'port' is empty. If it is empty, + this function should return TIOCSER_TEMT, otherwise return 0. + If the port does not support this operation, then it should + return TIOCSER_TEMT. + + Locking: none. + + Interrupts: caller dependent. + + This call must not sleep + + set_mctrl(port, mctrl) + This function sets the modem control lines for port described + by 'port' to the state described by mctrl. The relevant bits + of mctrl are: + + - TIOCM_RTS RTS signal. + - TIOCM_DTR DTR signal. + - TIOCM_OUT1 OUT1 signal. + - TIOCM_OUT2 OUT2 signal. + - TIOCM_LOOP Set the port into loopback mode. + + If the appropriate bit is set, the signal should be driven + active. If the bit is clear, the signal should be driven + inactive. + + Locking: port->lock taken. + + Interrupts: locally disabled. + + This call must not sleep + + get_mctrl(port) + Returns the current state of modem control inputs. The state + of the outputs should not be returned, since the core keeps + track of their state. The state information should include: + + - TIOCM_CAR state of DCD signal + - TIOCM_CTS state of CTS signal + - TIOCM_DSR state of DSR signal + - TIOCM_RI state of RI signal + + The bit is set if the signal is currently driven active. If + the port does not support CTS, DCD or DSR, the driver should + indicate that the signal is permanently active. If RI is + not available, the signal should not be indicated as active. + + Locking: port->lock taken. + + Interrupts: locally disabled. + + This call must not sleep + + stop_tx(port) + Stop transmitting characters. This might be due to the CTS + line becoming inactive or the tty layer indicating we want + to stop transmission due to an XOFF character. + + The driver should stop transmitting characters as soon as + possible. + + Locking: port->lock taken. + + Interrupts: locally disabled. + + This call must not sleep + + start_tx(port) + Start transmitting characters. + + Locking: port->lock taken. + + Interrupts: locally disabled. + + This call must not sleep + + throttle(port) + Notify the serial driver that input buffers for the line discipline are + close to full, and it should somehow signal that no more characters + should be sent to the serial port. + This will be called only if hardware assisted flow control is enabled. + + Locking: serialized with .unthrottle() and termios modification by the + tty layer. + + unthrottle(port) + Notify the serial driver that characters can now be sent to the serial + port without fear of overrunning the input buffers of the line + disciplines. + + This will be called only if hardware assisted flow control is enabled. + + Locking: serialized with .throttle() and termios modification by the + tty layer. + + send_xchar(port,ch) + Transmit a high priority character, even if the port is stopped. + This is used to implement XON/XOFF flow control and tcflow(). If + the serial driver does not implement this function, the tty core + will append the character to the circular buffer and then call + start_tx() / stop_tx() to flush the data out. + + Do not transmit if ch == '\0' (__DISABLED_CHAR). + + Locking: none. + + Interrupts: caller dependent. + + stop_rx(port) + Stop receiving characters; the port is in the process of + being closed. + + Locking: port->lock taken. + + Interrupts: locally disabled. + + This call must not sleep + + enable_ms(port) + Enable the modem status interrupts. + + This method may be called multiple times. Modem status + interrupts should be disabled when the shutdown method is + called. + + Locking: port->lock taken. + + Interrupts: locally disabled. + + This call must not sleep + + break_ctl(port,ctl) + Control the transmission of a break signal. If ctl is + nonzero, the break signal should be transmitted. The signal + should be terminated when another call is made with a zero + ctl. + + Locking: caller holds tty_port->mutex + + startup(port) + Grab any interrupt resources and initialise any low level driver + state. Enable the port for reception. It should not activate + RTS nor DTR; this will be done via a separate call to set_mctrl. + + This method will only be called when the port is initially opened. + + Locking: port_sem taken. + + Interrupts: globally disabled. + + shutdown(port) + Disable the port, disable any break condition that may be in + effect, and free any interrupt resources. It should not disable + RTS nor DTR; this will have already been done via a separate + call to set_mctrl. + + Drivers must not access port->state once this call has completed. + + This method will only be called when there are no more users of + this port. + + Locking: port_sem taken. + + Interrupts: caller dependent. + + flush_buffer(port) + Flush any write buffers, reset any DMA state and stop any + ongoing DMA transfers. + + This will be called whenever the port->state->xmit circular + buffer is cleared. + + Locking: port->lock taken. + + Interrupts: locally disabled. + + This call must not sleep + + set_termios(port,termios,oldtermios) + Change the port parameters, including word length, parity, stop + bits. Update read_status_mask and ignore_status_mask to indicate + the types of events we are interested in receiving. Relevant + termios->c_cflag bits are: + + CSIZE + - word size + CSTOPB + - 2 stop bits + PARENB + - parity enable + PARODD + - odd parity (when PARENB is in force) + CREAD + - enable reception of characters (if not set, + still receive characters from the port, but + throw them away. + CRTSCTS + - if set, enable CTS status change reporting + CLOCAL + - if not set, enable modem status change + reporting. + + Relevant termios->c_iflag bits are: + + INPCK + - enable frame and parity error events to be + passed to the TTY layer. + BRKINT / PARMRK + - both of these enable break events to be + passed to the TTY layer. + + IGNPAR + - ignore parity and framing errors + IGNBRK + - ignore break errors, If IGNPAR is also + set, ignore overrun errors as well. + + The interaction of the iflag bits is as follows (parity error + given as an example): + + =============== ======= ====== ============================= + Parity error INPCK IGNPAR + =============== ======= ====== ============================= + n/a 0 n/a character received, marked as + TTY_NORMAL + None 1 n/a character received, marked as + TTY_NORMAL + Yes 1 0 character received, marked as + TTY_PARITY + Yes 1 1 character discarded + =============== ======= ====== ============================= + + Other flags may be used (eg, xon/xoff characters) if your + hardware supports hardware "soft" flow control. + + Locking: caller holds tty_port->mutex + + Interrupts: caller dependent. + + This call must not sleep + + set_ldisc(port,termios) + Notifier for discipline change. See Documentation/driver-api/serial/tty.rst. + + Locking: caller holds tty_port->mutex + + pm(port,state,oldstate) + Perform any power management related activities on the specified + port. State indicates the new state (defined by + enum uart_pm_state), oldstate indicates the previous state. + + This function should not be used to grab any resources. + + This will be called when the port is initially opened and finally + closed, except when the port is also the system console. This + will occur even if CONFIG_PM is not set. + + Locking: none. + + Interrupts: caller dependent. + + type(port) + Return a pointer to a string constant describing the specified + port, or return NULL, in which case the string 'unknown' is + substituted. + + Locking: none. + + Interrupts: caller dependent. + + release_port(port) + Release any memory and IO region resources currently in use by + the port. + + Locking: none. + + Interrupts: caller dependent. + + request_port(port) + Request any memory and IO region resources required by the port. + If any fail, no resources should be registered when this function + returns, and it should return -EBUSY on failure. + + Locking: none. + + Interrupts: caller dependent. + + config_port(port,type) + Perform any autoconfiguration steps required for the port. `type` + contains a bit mask of the required configuration. UART_CONFIG_TYPE + indicates that the port requires detection and identification. + port->type should be set to the type found, or PORT_UNKNOWN if + no port was detected. + + UART_CONFIG_IRQ indicates autoconfiguration of the interrupt signal, + which should be probed using standard kernel autoprobing techniques. + This is not necessary on platforms where ports have interrupts + internally hard wired (eg, system on a chip implementations). + + Locking: none. + + Interrupts: caller dependent. + + verify_port(port,serinfo) + Verify the new serial port information contained within serinfo is + suitable for this port type. + + Locking: none. + + Interrupts: caller dependent. + + ioctl(port,cmd,arg) + Perform any port specific IOCTLs. IOCTL commands must be defined + using the standard numbering system found in + + Locking: none. + + Interrupts: caller dependent. + + poll_init(port) + Called by kgdb to perform the minimal hardware initialization needed + to support poll_put_char() and poll_get_char(). Unlike ->startup() + this should not request interrupts. + + Locking: tty_mutex and tty_port->mutex taken. + + Interrupts: n/a. + + poll_put_char(port,ch) + Called by kgdb to write a single character directly to the serial + port. It can and should block until there is space in the TX FIFO. + + Locking: none. + + Interrupts: caller dependent. + + This call must not sleep + + poll_get_char(port) + Called by kgdb to read a single character directly from the serial + port. If data is available, it should be returned; otherwise + the function should return NO_POLL_CHAR immediately. + + Locking: none. + + Interrupts: caller dependent. + + This call must not sleep + +Other functions +--------------- + +uart_update_timeout(port,cflag,baud) + Update the FIFO drain timeout, port->timeout, according to the + number of bits, parity, stop bits and baud rate. + + Locking: caller is expected to take port->lock + + Interrupts: n/a + +uart_get_baud_rate(port,termios,old,min,max) + Return the numeric baud rate for the specified termios, taking + account of the special 38400 baud "kludge". The B0 baud rate + is mapped to 9600 baud. + + If the baud rate is not within min..max, then if old is non-NULL, + the original baud rate will be tried. If that exceeds the + min..max constraint, 9600 baud will be returned. termios will + be updated to the baud rate in use. + + Note: min..max must always allow 9600 baud to be selected. + + Locking: caller dependent. + + Interrupts: n/a + +uart_get_divisor(port,baud) + Return the divisor (baud_base / baud) for the specified baud + rate, appropriately rounded. + + If 38400 baud and custom divisor is selected, return the + custom divisor instead. + + Locking: caller dependent. + + Interrupts: n/a + +uart_match_port(port1,port2) + This utility function can be used to determine whether two + uart_port structures describe the same port. + + Locking: n/a + + Interrupts: n/a + +uart_write_wakeup(port) + A driver is expected to call this function when the number of + characters in the transmit buffer have dropped below a threshold. + + Locking: port->lock should be held. + + Interrupts: n/a + +uart_register_driver(drv) + Register a uart driver with the core driver. We in turn register + with the tty layer, and initialise the core driver per-port state. + + drv->port should be NULL, and the per-port structures should be + registered using uart_add_one_port after this call has succeeded. + + Locking: none + + Interrupts: enabled + +uart_unregister_driver() + Remove all references to a driver from the core driver. The low + level driver must have removed all its ports via the + uart_remove_one_port() if it registered them with uart_add_one_port(). + + Locking: none + + Interrupts: enabled + +**uart_suspend_port()** + +**uart_resume_port()** + +**uart_add_one_port()** + +**uart_remove_one_port()** + +Other notes +----------- + +It is intended some day to drop the 'unused' entries from uart_port, and +allow low level drivers to register their own individual uart_port's with +the core. This will allow drivers to use uart_port as a pointer to a +structure containing both the uart_port entry with their own extensions, +thus:: + + struct my_port { + struct uart_port port; + int my_stuff; + }; + +Modem control lines via GPIO +---------------------------- + +Some helpers are provided in order to set/get modem control lines via GPIO. + +mctrl_gpio_init(port, idx): + This will get the {cts,rts,...}-gpios from device tree if they are + present and request them, set direction etc, and return an + allocated structure. `devm_*` functions are used, so there's no need + to call mctrl_gpio_free(). + As this sets up the irq handling make sure to not handle changes to the + gpio input lines in your driver, too. + +mctrl_gpio_free(dev, gpios): + This will free the requested gpios in mctrl_gpio_init(). + As `devm_*` functions are used, there's generally no need to call + this function. + +mctrl_gpio_to_gpiod(gpios, gidx) + This returns the gpio_desc structure associated to the modem line + index. + +mctrl_gpio_set(gpios, mctrl): + This will sets the gpios according to the mctrl state. + +mctrl_gpio_get(gpios, mctrl): + This will update mctrl with the gpios values. + +mctrl_gpio_enable_ms(gpios): + Enables irqs and handling of changes to the ms lines. + +mctrl_gpio_disable_ms(gpios): + Disables irqs and handling of changes to the ms lines. diff --git a/Documentation/driver-api/serial/index.rst b/Documentation/driver-api/serial/index.rst new file mode 100644 index 000000000000..33ad10d05b26 --- /dev/null +++ b/Documentation/driver-api/serial/index.rst @@ -0,0 +1,32 @@ +.. SPDX-License-Identifier: GPL-2.0 + +========================== +Support for Serial devices +========================== + +.. toctree:: + :maxdepth: 1 + + + driver + tty + +Serial drivers +============== + +.. toctree:: + :maxdepth: 1 + + cyclades_z + moxa-smartio + n_gsm + rocket + serial-iso7816 + serial-rs485 + +.. only:: subproject and html + + Indices + ======= + + * :ref:`genindex` diff --git a/Documentation/driver-api/serial/moxa-smartio.rst b/Documentation/driver-api/serial/moxa-smartio.rst new file mode 100644 index 000000000000..156100f17c3f --- /dev/null +++ b/Documentation/driver-api/serial/moxa-smartio.rst @@ -0,0 +1,615 @@ +============================================================= +MOXA Smartio/Industio Family Device Driver Installation Guide +============================================================= + +.. note:: + + This file is outdated. It needs some care in order to make it + updated to Kernel 5.0 and upper + +Copyright (C) 2008, Moxa Inc. + +Date: 01/21/2008 + +.. Content + + 1. Introduction + 2. System Requirement + 3. Installation + 3.1 Hardware installation + 3.2 Driver files + 3.3 Device naming convention + 3.4 Module driver configuration + 3.5 Static driver configuration for Linux kernel 2.4.x and 2.6.x. + 3.6 Custom configuration + 3.7 Verify driver installation + 4. Utilities + 5. Setserial + 6. Troubleshooting + +1. Introduction +^^^^^^^^^^^^^^^ + + The Smartio/Industio/UPCI family Linux driver supports following multiport + boards. + + - 2 ports multiport board + CP-102U, CP-102UL, CP-102UF + CP-132U-I, CP-132UL, + CP-132, CP-132I, CP132S, CP-132IS, + CI-132, CI-132I, CI-132IS, + (C102H, C102HI, C102HIS, C102P, CP-102, CP-102S) + + - 4 ports multiport board + CP-104EL, + CP-104UL, CP-104JU, + CP-134U, CP-134U-I, + C104H/PCI, C104HS/PCI, + CP-114, CP-114I, CP-114S, CP-114IS, CP-114UL, + C104H, C104HS, + CI-104J, CI-104JS, + CI-134, CI-134I, CI-134IS, + (C114HI, CT-114I, C104P), + POS-104UL, + CB-114, + CB-134I + + - 8 ports multiport board + CP-118EL, CP-168EL, + CP-118U, CP-168U, + C168H/PCI, + C168H, C168HS, + (C168P), + CB-108 + + This driver and installation procedure have been developed upon Linux Kernel + 2.4.x and 2.6.x. This driver supports Intel x86 hardware platform. In order + to maintain compatibility, this version has also been properly tested with + RedHat, Mandrake, Fedora and S.u.S.E Linux. However, if compatibility problem + occurs, please contact Moxa at support@moxa.com.tw. + + In addition to device driver, useful utilities are also provided in this + version. They are: + + - msdiag + Diagnostic program for displaying installed Moxa + Smartio/Industio boards. + - msmon + Monitor program to observe data count and line status signals. + - msterm A simple terminal program which is useful in testing serial + ports. + - io-irq.exe + Configuration program to setup ISA boards. Please note that + this program can only be executed under DOS. + + All the drivers and utilities are published in form of source code under + GNU General Public License in this version. Please refer to GNU General + Public License announcement in each source code file for more detail. + + In Moxa's Web sites, you may always find latest driver at http://www.moxa.com/. + + This version of driver can be installed as Loadable Module (Module driver) + or built-in into kernel (Static driver). You may refer to following + installation procedure for suitable one. Before you install the driver, + please refer to hardware installation procedure in the User's Manual. + + We assume the user should be familiar with following documents. + + - Serial-HOWTO + - Kernel-HOWTO + +2. System Requirement +^^^^^^^^^^^^^^^^^^^^^ + + - Hardware platform: Intel x86 machine + - Kernel version: 2.4.x or 2.6.x + - gcc version 2.72 or later + - Maximum 4 boards can be installed in combination + +3. Installation +^^^^^^^^^^^^^^^ + +3.1 Hardware installation +========================= + + There are two types of buses, ISA and PCI, for Smartio/Industio + family multiport board. + +ISA board +--------- + + You'll have to configure CAP address, I/O address, Interrupt Vector + as well as IRQ before installing this driver. Please refer to hardware + installation procedure in User's Manual before proceed any further. + Please make sure the JP1 is open after the ISA board is set properly. + +PCI/UPCI board +-------------- + + You may need to adjust IRQ usage in BIOS to avoid from IRQ conflict + with other ISA devices. Please refer to hardware installation + procedure in User's Manual in advance. + +PCI IRQ Sharing +--------------- + + Each port within the same multiport board shares the same IRQ. Up to + 4 Moxa Smartio/Industio PCI Family multiport boards can be installed + together on one system and they can share the same IRQ. + + +3.2 Driver files +================ + + The driver file may be obtained from ftp, CD-ROM or floppy disk. The + first step, anyway, is to copy driver file "mxser.tgz" into specified + directory. e.g. /moxa. The execute commands as below:: + + # cd / + # mkdir moxa + # cd /moxa + # tar xvf /dev/fd0 + +or:: + + # cd / + # mkdir moxa + # cd /moxa + # cp /mnt/cdrom//mxser.tgz . + # tar xvfz mxser.tgz + + +3.3 Device naming convention +============================ + + You may find all the driver and utilities files in /moxa/mxser. + Following installation procedure depends on the model you'd like to + run the driver. If you prefer module driver, please refer to 3.4. + If static driver is required, please refer to 3.5. + +Dialin and callout port +----------------------- + + This driver remains traditional serial device properties. There are + two special file name for each serial port. One is dial-in port + which is named "ttyMxx". For callout port, the naming convention + is "cumxx". + +Device naming when more than 2 boards installed +----------------------------------------------- + + Naming convention for each Smartio/Industio multiport board is + pre-defined as below. + + ============ =============== ============== + Board Num. Dial-in Port Callout port + 1st board ttyM0 - ttyM7 cum0 - cum7 + 2nd board ttyM8 - ttyM15 cum8 - cum15 + 3rd board ttyM16 - ttyM23 cum16 - cum23 + 4th board ttyM24 - ttym31 cum24 - cum31 + ============ =============== ============== + +.. note:: + + Under Kernel 2.6 and upper, the cum Device is Obsolete. So use ttyM* + device instead. + +Board sequence +-------------- + + This driver will activate ISA boards according to the parameter set + in the driver. After all specified ISA board activated, PCI board + will be installed in the system automatically driven. + Therefore the board number is sorted by the CAP address of ISA boards. + For PCI boards, their sequence will be after ISA boards and C168H/PCI + has higher priority than C104H/PCI boards. + +3.4 Module driver configuration +=============================== + + Module driver is easiest way to install. If you prefer static driver + installation, please skip this paragraph. + + + ------------- Prepare to use the MOXA driver -------------------- + +3.4.1 Create tty device with correct major number +------------------------------------------------- + + Before using MOXA driver, your system must have the tty devices + which are created with driver's major number. We offer one shell + script "msmknod" to simplify the procedure. + This step is only needed to be executed once. But you still + need to do this procedure when: + + a. You change the driver's major number. Please refer the "3.7" + section. + b. Your total installed MOXA boards number is changed. Maybe you + add/delete one MOXA board. + c. You want to change the tty name. This needs to modify the + shell script "msmknod" + + The procedure is:: + + # cd /moxa/mxser/driver + # ./msmknod + + This shell script will require the major number for dial-in + device and callout device to create tty device. You also need + to specify the total installed MOXA board number. Default major + numbers for dial-in device and callout device are 30, 35. If + you need to change to other number, please refer section "3.7" + for more detailed procedure. + Msmknod will delete any special files occupying the same device + naming. + +3.4.2 Build the MOXA driver and utilities +----------------------------------------- + + Before using the MOXA driver and utilities, you need compile the + all the source code. This step is only need to be executed once. + But you still re-compile the source code if you modify the source + code. For example, if you change the driver's major number (see + "3.7" section), then you need to do this step again. + + Find "Makefile" in /moxa/mxser, then run + + # make clean; make install + + ..note:: + + For Red Hat 9, Red Hat Enterprise Linux AS3/ES3/WS3 & Fedora Core1: + # make clean; make installsp1 + + For Red Hat Enterprise Linux AS4/ES4/WS4: + # make clean; make installsp2 + + The driver files "mxser.o" and utilities will be properly compiled + and copied to system directories respectively. + +------------- Load MOXA driver-------------------- + +3.4.3 Load the MOXA driver +-------------------------- + + :: + + # modprobe mxser + + will activate the module driver. You may run "lsmod" to check + if "mxser" is activated. If the MOXA board is ISA board, the + is needed. Please refer to section "3.4.5" for more + information. + +------------- Load MOXA driver on boot -------------------- + +3.4.4 Load the mxser driver +--------------------------- + + + For the above description, you may manually execute + "modprobe mxser" to activate this driver and run + "rmmod mxser" to remove it. + + However, it's better to have a boot time configuration to + eliminate manual operation. Boot time configuration can be + achieved by rc file. We offer one "rc.mxser" file to simplify + the procedure under "moxa/mxser/driver". + + But if you use ISA board, please modify the "modprobe ..." command + to add the argument (see "3.4.5" section). After modifying the + rc.mxser, please try to execute "/moxa/mxser/driver/rc.mxser" + manually to make sure the modification is ok. If any error + encountered, please try to modify again. If the modification is + completed, follow the below step. + + Run following command for setting rc files:: + + # cd /moxa/mxser/driver + # cp ./rc.mxser /etc/rc.d + # cd /etc/rc.d + + Check "rc.serial" is existed or not. If "rc.serial" doesn't exist, + create it by vi, run "chmod 755 rc.serial" to change the permission. + + Add "/etc/rc.d/rc.mxser" in last line. + + Reboot and check if moxa.o activated by "lsmod" command. + +3.4.5. specify CAP address +-------------------------- + + If you'd like to drive Smartio/Industio ISA boards in the system, + you'll have to add parameter to specify CAP address of given + board while activating "mxser.o". The format for parameters are + as follows.:: + + modprobe mxser ioaddr=0x???,0x???,0x???,0x??? + | | | | + | | | +- 4th ISA board + | | +------ 3rd ISA board + | +------------ 2nd ISA board + +-------------------1st ISA board + +3.5 Static driver configuration for Linux kernel 2.4.x and 2.6.x +================================================================ + + Note: + To use static driver, you must install the linux kernel + source package. + +3.5.1 Backup the built-in driver in the kernel +---------------------------------------------- + + :: + + # cd /usr/src/linux/drivers/char + # mv mxser.c mxser.c.old + + For Red Hat 7.x user, you need to create link: + # cd /usr/src + # ln -s linux-2.4 linux + +3.5.2 Create link +----------------- + :: + + # cd /usr/src/linux/drivers/char + # ln -s /moxa/mxser/driver/mxser.c mxser.c + +3.5.3 Add CAP address list for ISA boards. +------------------------------------------ + + For PCI boards user, please skip this step. + + In module mode, the CAP address for ISA board is given by + parameter. In static driver configuration, you'll have to + assign it within driver's source code. If you will not + install any ISA boards, you may skip to next portion. + The instructions to modify driver source code are as + below. + + a. run:: + + # cd /moxa/mxser/driver + # vi mxser.c + + b. Find the array mxserBoardCAP[] as below:: + + static int mxserBoardCAP[] = {0x00, 0x00, 0x00, 0x00}; + + c. Change the address within this array using vi. For + example, to driver 2 ISA boards with CAP address + 0x280 and 0x180 as 1st and 2nd board. Just to change + the source code as follows:: + + static int mxserBoardCAP[] = {0x280, 0x180, 0x00, 0x00}; + +3.5.4 Setup kernel configuration +-------------------------------- + + Configure the kernel:: + + # cd /usr/src/linux + # make menuconfig + + You will go into a menu-driven system. Please select [Character + devices][Non-standard serial port support], enable the [Moxa + SmartIO support] driver with "[*]" for built-in (not "[M]"), then + select [Exit] to exit this program. + +3.5.5 Rebuild kernel +-------------------- + + The following are for Linux kernel rebuilding, for your + reference only. + + For appropriate details, please refer to the Linux document: + + a. Run the following commands:: + + cd /usr/src/linux + make clean # take a few minutes + make dep # take a few minutes + make bzImage # take probably 10-20 minutes + make install # copy boot image to correct position + + f. Please make sure the boot kernel (vmlinuz) is in the + correct position. + g. If you use 'lilo' utility, you should check /etc/lilo.conf + 'image' item specified the path which is the 'vmlinuz' path, + or you will load wrong (or old) boot kernel image (vmlinuz). + After checking /etc/lilo.conf, please run "lilo". + + Note that if the result of "make bzImage" is ERROR, then you have to + go back to Linux configuration Setup. Type "make menuconfig" in + directory /usr/src/linux. + + +3.5.6 Make tty device and special file +-------------------------------------- + + :: + # cd /moxa/mxser/driver + # ./msmknod + +3.5.7 Make utility +------------------ + + :: + + # cd /moxa/mxser/utility + # make clean; make install + +3.5.8 Reboot +------------ + + + +3.6 Custom configuration +======================== + + Although this driver already provides you default configuration, you + still can change the device name and major number. The instruction to + change these parameters are shown as below. + +a. Change Device name + + If you'd like to use other device names instead of default naming + convention, all you have to do is to modify the internal code + within the shell script "msmknod". First, you have to open "msmknod" + by vi. Locate each line contains "ttyM" and "cum" and change them + to the device name you desired. "msmknod" creates the device names + you need next time executed. + +b. Change Major number + + If major number 30 and 35 had been occupied, you may have to select + 2 free major numbers for this driver. There are 3 steps to change + major numbers. + +3.6.1 Find free major numbers +----------------------------- + + In /proc/devices, you may find all the major numbers occupied + in the system. Please select 2 major numbers that are available. + e.g. 40, 45. + +3.6.2 Create special files +-------------------------- + + Run /moxa/mxser/driver/msmknod to create special files with + specified major numbers. + +3.6.3 Modify driver with new major number +----------------------------------------- + + Run vi to open /moxa/mxser/driver/mxser.c. Locate the line + contains "MXSERMAJOR". Change the content as below:: + + #define MXSERMAJOR 40 + #define MXSERCUMAJOR 45 + + 3.6.4 Run "make clean; make install" in /moxa/mxser/driver. + +3.7 Verify driver installation +============================== + + You may refer to /var/log/messages to check the latest status + log reported by this driver whenever it's activated. + +4. Utilities +^^^^^^^^^^^^ + + There are 3 utilities contained in this driver. They are msdiag, msmon and + msterm. These 3 utilities are released in form of source code. They should + be compiled into executable file and copied into /usr/bin. + + Before using these utilities, please load driver (refer 3.4 & 3.5) and + make sure you had run the "msmknod" utility. + +msdiag - Diagnostic +=================== + + This utility provides the function to display what Moxa Smartio/Industio + board found by driver in the system. + +msmon - Port Monitoring +======================= + + This utility gives the user a quick view about all the MOXA ports' + activities. One can easily learn each port's total received/transmitted + (Rx/Tx) character count since the time when the monitoring is started. + + Rx/Tx throughputs per second are also reported in interval basis (e.g. + the last 5 seconds) and in average basis (since the time the monitoring + is started). You can reset all ports' count by key. <+> <-> + (plus/minus) keys to change the displaying time interval. Press + on the port, that cursor stay, to view the port's communication + parameters, signal status, and input/output queue. + +msterm - Terminal Emulation +=========================== + + This utility provides data sending and receiving ability of all tty ports, + especially for MOXA ports. It is quite useful for testing simple + application, for example, sending AT command to a modem connected to the + port or used as a terminal for login purpose. Note that this is only a + dumb terminal emulation without handling full screen operation. + +5. Setserial +^^^^^^^^^^^^ + + Supported Setserial parameters are listed as below. + + ============== ========================================================= + uart set UART type(16450-->disable FIFO, 16550A-->enable FIFO) + close_delay set the amount of time(in 1/100 of a second) that DTR + should be kept low while being closed. + closing_wait set the amount of time(in 1/100 of a second) that the + serial port should wait for data to be drained while + being closed, before the receiver is disable. + spd_hi Use 57.6kb when the application requests 38.4kb. + spd_vhi Use 115.2kb when the application requests 38.4kb. + spd_shi Use 230.4kb when the application requests 38.4kb. + spd_warp Use 460.8kb when the application requests 38.4kb. + spd_normal Use 38.4kb when the application requests 38.4kb. + spd_cust Use the custom divisor to set the speed when the + application requests 38.4kb. + divisor This option set the custom division. + baud_base This option set the base baud rate. + ============== ========================================================= + +6. Troubleshooting +^^^^^^^^^^^^^^^^^^ + + The boot time error messages and solutions are stated as clearly as + possible. If all the possible solutions fail, please contact our technical + support team to get more help. + + + Error msg: + More than 4 Moxa Smartio/Industio family boards found. Fifth board + and after are ignored. + + Solution: + To avoid this problem, please unplug fifth and after board, because Moxa + driver supports up to 4 boards. + + Error msg: + Request_irq fail, IRQ(?) may be conflict with another device. + + Solution: + Other PCI or ISA devices occupy the assigned IRQ. If you are not sure + which device causes the situation, please check /proc/interrupts to find + free IRQ and simply change another free IRQ for Moxa board. + + Error msg: + Board #: C1xx Series(CAP=xxx) interrupt number invalid. + + Solution: + Each port within the same multiport board shares the same IRQ. Please set + one IRQ (IRQ doesn't equal to zero) for one Moxa board. + + Error msg: + No interrupt vector be set for Moxa ISA board(CAP=xxx). + + Solution: + Moxa ISA board needs an interrupt vector.Please refer to user's manual + "Hardware Installation" chapter to set interrupt vector. + + Error msg: + Couldn't install MOXA Smartio/Industio family driver! + + Solution: + Load Moxa driver fail, the major number may conflict with other devices. + Please refer to previous section 3.7 to change a free major number for + Moxa driver. + + Error msg: + Couldn't install MOXA Smartio/Industio family callout driver! + + Solution: + Load Moxa callout driver fail, the callout device major number may + conflict with other devices. Please refer to previous section 3.7 to + change a free callout device major number for Moxa driver. diff --git a/Documentation/driver-api/serial/n_gsm.rst b/Documentation/driver-api/serial/n_gsm.rst new file mode 100644 index 000000000000..f3ad9fd26408 --- /dev/null +++ b/Documentation/driver-api/serial/n_gsm.rst @@ -0,0 +1,103 @@ +============================== +GSM 0710 tty multiplexor HOWTO +============================== + +This line discipline implements the GSM 07.10 multiplexing protocol +detailed in the following 3GPP document: + + http://www.3gpp.org/ftp/Specs/archive/07_series/07.10/0710-720.zip + +This document give some hints on how to use this driver with GPRS and 3G +modems connected to a physical serial port. + +How to use it +------------- +1. initialize the modem in 0710 mux mode (usually AT+CMUX= command) through + its serial port. Depending on the modem used, you can pass more or less + parameters to this command, +2. switch the serial line to using the n_gsm line discipline by using + TIOCSETD ioctl, +3. configure the mux using GSMIOC_GETCONF / GSMIOC_SETCONF ioctl, + +Major parts of the initialization program : +(a good starting point is util-linux-ng/sys-utils/ldattach.c):: + + #include + #define N_GSM0710 21 /* GSM 0710 Mux */ + #define DEFAULT_SPEED B115200 + #define SERIAL_PORT /dev/ttyS0 + + int ldisc = N_GSM0710; + struct gsm_config c; + struct termios configuration; + + /* open the serial port connected to the modem */ + fd = open(SERIAL_PORT, O_RDWR | O_NOCTTY | O_NDELAY); + + /* configure the serial port : speed, flow control ... */ + + /* send the AT commands to switch the modem to CMUX mode + and check that it's successful (should return OK) */ + write(fd, "AT+CMUX=0\r", 10); + + /* experience showed that some modems need some time before + being able to answer to the first MUX packet so a delay + may be needed here in some case */ + sleep(3); + + /* use n_gsm line discipline */ + ioctl(fd, TIOCSETD, &ldisc); + + /* get n_gsm configuration */ + ioctl(fd, GSMIOC_GETCONF, &c); + /* we are initiator and need encoding 0 (basic) */ + c.initiator = 1; + c.encapsulation = 0; + /* our modem defaults to a maximum size of 127 bytes */ + c.mru = 127; + c.mtu = 127; + /* set the new configuration */ + ioctl(fd, GSMIOC_SETCONF, &c); + + /* and wait for ever to keep the line discipline enabled */ + daemon(0,0); + pause(); + +4. create the devices corresponding to the "virtual" serial ports (take care, + each modem has its configuration and some DLC have dedicated functions, + for example GPS), starting with minor 1 (DLC0 is reserved for the management + of the mux):: + + MAJOR=`cat /proc/devices |grep gsmtty | awk '{print $1}` + for i in `seq 1 4`; do + mknod /dev/ttygsm$i c $MAJOR $i + done + +5. use these devices as plain serial ports. + + for example, it's possible: + + - and to use gnokii to send / receive SMS on ttygsm1 + - to use ppp to establish a datalink on ttygsm2 + +6. first close all virtual ports before closing the physical port. + + Note that after closing the physical port the modem is still in multiplexing + mode. This may prevent a successful re-opening of the port later. To avoid + this situation either reset the modem if your hardware allows that or send + a disconnect command frame manually before initializing the multiplexing mode + for the second time. The byte sequence for the disconnect command frame is:: + + 0xf9, 0x03, 0xef, 0x03, 0xc3, 0x16, 0xf9. + +Additional Documentation +------------------------ +More practical details on the protocol and how it's supported by industrial +modems can be found in the following documents : + +- http://www.telit.com/module/infopool/download.php?id=616 +- http://www.u-blox.com/images/downloads/Product_Docs/LEON-G100-G200-MuxImplementation_ApplicationNote_%28GSM%20G1-CS-10002%29.pdf +- http://www.sierrawireless.com/Support/Downloads/AirPrime/WMP_Series/~/media/Support_Downloads/AirPrime/Application_notes/CMUX_Feature_Application_Note-Rev004.ashx +- http://wm.sim.com/sim/News/photo/2010721161442.pdf + +11-03-08 - Eric Bénard - diff --git a/Documentation/driver-api/serial/rocket.rst b/Documentation/driver-api/serial/rocket.rst new file mode 100644 index 000000000000..23761eae4282 --- /dev/null +++ b/Documentation/driver-api/serial/rocket.rst @@ -0,0 +1,185 @@ +================================================ +Comtrol(tm) RocketPort(R)/RocketModem(TM) Series +================================================ + +Device Driver for the Linux Operating System +============================================ + +Product overview +---------------- + +This driver provides a loadable kernel driver for the Comtrol RocketPort +and RocketModem PCI boards. These boards provide, 2, 4, 8, 16, or 32 +high-speed serial ports or modems. This driver supports up to a combination +of four RocketPort or RocketModems boards in one machine simultaneously. +This file assumes that you are using the RocketPort driver which is +integrated into the kernel sources. + +The driver can also be installed as an external module using the usual +"make;make install" routine. This external module driver, obtainable +from the Comtrol website listed below, is useful for updating the driver +or installing it into kernels which do not have the driver configured +into them. Installations instructions for the external module +are in the included README and HW_INSTALL files. + +RocketPort ISA and RocketModem II PCI boards currently are only supported by +this driver in module form. + +The RocketPort ISA board requires I/O ports to be configured by the DIP +switches on the board. See the section "ISA Rocketport Boards" below for +information on how to set the DIP switches. + +You pass the I/O port to the driver using the following module parameters: + +board1: + I/O port for the first ISA board +board2: + I/O port for the second ISA board +board3: + I/O port for the third ISA board +board4: + I/O port for the fourth ISA board + +There is a set of utilities and scripts provided with the external driver +(downloadable from http://www.comtrol.com) that ease the configuration and +setup of the ISA cards. + +The RocketModem II PCI boards require firmware to be loaded into the card +before it will function. The driver has only been tested as a module for this +board. + +Installation Procedures +----------------------- + +RocketPort/RocketModem PCI cards require no driver configuration, they are +automatically detected and configured. + +The RocketPort driver can be installed as a module (recommended) or built +into the kernel. This is selected, as for other drivers, through the `make config` +command from the root of the Linux source tree during the kernel build process. + +The RocketPort/RocketModem serial ports installed by this driver are assigned +device major number 46, and will be named /dev/ttyRx, where x is the port number +starting at zero (ex. /dev/ttyR0, /devttyR1, ...). If you have multiple cards +installed in the system, the mapping of port names to serial ports is displayed +in the system log at /var/log/messages. + +If installed as a module, the module must be loaded. This can be done +manually by entering "modprobe rocket". To have the module loaded automatically +upon system boot, edit a `/etc/modprobe.d/*.conf` file and add the line +"alias char-major-46 rocket". + +In order to use the ports, their device names (nodes) must be created with mknod. +This is only required once, the system will retain the names once created. To +create the RocketPort/RocketModem device names, use the command +"mknod /dev/ttyRx c 46 x" where x is the port number starting at zero. + +For example:: + + > mknod /dev/ttyR0 c 46 0 + > mknod /dev/ttyR1 c 46 1 + > mknod /dev/ttyR2 c 46 2 + +The Linux script MAKEDEV will create the first 16 ttyRx device names (nodes) +for you:: + + >/dev/MAKEDEV ttyR + +ISA Rocketport Boards +--------------------- + +You must assign and configure the I/O addresses used by the ISA Rocketport +card before installing and using it. This is done by setting a set of DIP +switches on the Rocketport board. + + +Setting the I/O address +----------------------- + +Before installing RocketPort(R) or RocketPort RA boards, you must find +a range of I/O addresses for it to use. The first RocketPort card +requires a 68-byte contiguous block of I/O addresses, starting at one +of the following: 0x100h, 0x140h, 0x180h, 0x200h, 0x240h, 0x280h, +0x300h, 0x340h, 0x380h. This I/O address must be reflected in the DIP +switches of *all* of the Rocketport cards. + +The second, third, and fourth RocketPort cards require a 64-byte +contiguous block of I/O addresses, starting at one of the following +I/O addresses: 0x100h, 0x140h, 0x180h, 0x1C0h, 0x200h, 0x240h, 0x280h, +0x2C0h, 0x300h, 0x340h, 0x380h, 0x3C0h. The I/O address used by the +second, third, and fourth Rocketport cards (if present) are set via +software control. The DIP switch settings for the I/O address must be +set to the value of the first Rocketport cards. + +In order to distinguish each of the card from the others, each card +must have a unique board ID set on the dip switches. The first +Rocketport board must be set with the DIP switches corresponding to +the first board, the second board must be set with the DIP switches +corresponding to the second board, etc. IMPORTANT: The board ID is +the only place where the DIP switch settings should differ between the +various Rocketport boards in a system. + +The I/O address range used by any of the RocketPort cards must not +conflict with any other cards in the system, including other +RocketPort cards. Below, you will find a list of commonly used I/O +address ranges which may be in use by other devices in your system. +On a Linux system, "cat /proc/ioports" will also be helpful in +identifying what I/O addresses are being used by devices on your +system. + +Remember, the FIRST RocketPort uses 68 I/O addresses. So, if you set it +for 0x100, it will occupy 0x100 to 0x143. This would mean that you +CAN NOT set the second, third or fourth board for address 0x140 since +the first 4 bytes of that range are used by the first board. You would +need to set the second, third, or fourth board to one of the next available +blocks such as 0x180. + +RocketPort and RocketPort RA SW1 Settings:: + + +-------------------------------+ + | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | + +-------+-------+---------------+ + | Unused| Card | I/O Port Block| + +-------------------------------+ + + DIP Switches DIP Switches + 7 8 6 5 + =================== =================== + On On UNUSED, MUST BE ON. On On First Card <==== Default + On Off Second Card + Off On Third Card + Off Off Fourth Card + + DIP Switches I/O Address Range + 4 3 2 1 Used by the First Card + ===================================== + On Off On Off 100-143 + On Off Off On 140-183 + On Off Off Off 180-1C3 <==== Default + Off On On Off 200-243 + Off On Off On 240-283 + Off On Off Off 280-2C3 + Off Off On Off 300-343 + Off Off Off On 340-383 + Off Off Off Off 380-3C3 + +Reporting Bugs +-------------- + +For technical support, please provide the following +information: Driver version, kernel release, distribution of +kernel, and type of board you are using. Error messages and log +printouts port configuration details are especially helpful. + +USA: + :Phone: (612) 494-4100 + :FAX: (612) 494-4199 + :email: support@comtrol.com + +Comtrol Europe: + :Phone: +44 (0) 1 869 323-220 + :FAX: +44 (0) 1 869 323-211 + :email: support@comtrol.co.uk + +Web: http://www.comtrol.com +FTP: ftp.comtrol.com diff --git a/Documentation/driver-api/serial/serial-iso7816.rst b/Documentation/driver-api/serial/serial-iso7816.rst new file mode 100644 index 000000000000..d990143de0c6 --- /dev/null +++ b/Documentation/driver-api/serial/serial-iso7816.rst @@ -0,0 +1,90 @@ +============================= +ISO7816 Serial Communications +============================= + +1. Introduction +=============== + + ISO/IEC7816 is a series of standards specifying integrated circuit cards (ICC) + also known as smart cards. + +2. Hardware-related considerations +================================== + + Some CPUs/UARTs (e.g., Microchip AT91) contain a built-in mode capable of + handling communication with a smart card. + + For these microcontrollers, the Linux driver should be made capable of + working in both modes, and proper ioctls (see later) should be made + available at user-level to allow switching from one mode to the other, and + vice versa. + +3. Data Structures Already Available in the Kernel +================================================== + + The Linux kernel provides the serial_iso7816 structure (see [1]) to handle + ISO7816 communications. This data structure is used to set and configure + ISO7816 parameters in ioctls. + + Any driver for devices capable of working both as RS232 and ISO7816 should + implement the iso7816_config callback in the uart_port structure. The + serial_core calls iso7816_config to do the device specific part in response + to TIOCGISO7816 and TIOCSISO7816 ioctls (see below). The iso7816_config + callback receives a pointer to struct serial_iso7816. + +4. Usage from user-level +======================== + + From user-level, ISO7816 configuration can be get/set using the previous + ioctls. For instance, to set ISO7816 you can use the following code:: + + #include + + /* Include definition for ISO7816 ioctls: TIOCSISO7816 and TIOCGISO7816 */ + #include + + /* Open your specific device (e.g., /dev/mydevice): */ + int fd = open ("/dev/mydevice", O_RDWR); + if (fd < 0) { + /* Error handling. See errno. */ + } + + struct serial_iso7816 iso7816conf; + + /* Reserved fields as to be zeroed */ + memset(&iso7816conf, 0, sizeof(iso7816conf)); + + /* Enable ISO7816 mode: */ + iso7816conf.flags |= SER_ISO7816_ENABLED; + + /* Select the protocol: */ + /* T=0 */ + iso7816conf.flags |= SER_ISO7816_T(0); + /* or T=1 */ + iso7816conf.flags |= SER_ISO7816_T(1); + + /* Set the guard time: */ + iso7816conf.tg = 2; + + /* Set the clock frequency*/ + iso7816conf.clk = 3571200; + + /* Set transmission factors: */ + iso7816conf.sc_fi = 372; + iso7816conf.sc_di = 1; + + if (ioctl(fd_usart, TIOCSISO7816, &iso7816conf) < 0) { + /* Error handling. See errno. */ + } + + /* Use read() and write() syscalls here... */ + + /* Close the device when finished: */ + if (close (fd) < 0) { + /* Error handling. See errno. */ + } + +5. References +============= + + [1] include/uapi/linux/serial.h diff --git a/Documentation/driver-api/serial/serial-rs485.rst b/Documentation/driver-api/serial/serial-rs485.rst new file mode 100644 index 000000000000..6bc824f948f9 --- /dev/null +++ b/Documentation/driver-api/serial/serial-rs485.rst @@ -0,0 +1,103 @@ +=========================== +RS485 Serial Communications +=========================== + +1. Introduction +=============== + + EIA-485, also known as TIA/EIA-485 or RS-485, is a standard defining the + electrical characteristics of drivers and receivers for use in balanced + digital multipoint systems. + This standard is widely used for communications in industrial automation + because it can be used effectively over long distances and in electrically + noisy environments. + +2. Hardware-related Considerations +================================== + + Some CPUs/UARTs (e.g., Atmel AT91 or 16C950 UART) contain a built-in + half-duplex mode capable of automatically controlling line direction by + toggling RTS or DTR signals. That can be used to control external + half-duplex hardware like an RS485 transceiver or any RS232-connected + half-duplex devices like some modems. + + For these microcontrollers, the Linux driver should be made capable of + working in both modes, and proper ioctls (see later) should be made + available at user-level to allow switching from one mode to the other, and + vice versa. + +3. Data Structures Already Available in the Kernel +================================================== + + The Linux kernel provides the serial_rs485 structure (see [1]) to handle + RS485 communications. This data structure is used to set and configure RS485 + parameters in the platform data and in ioctls. + + The device tree can also provide RS485 boot time parameters (see [2] + for bindings). The driver is in charge of filling this data structure from + the values given by the device tree. + + Any driver for devices capable of working both as RS232 and RS485 should + implement the rs485_config callback in the uart_port structure. The + serial_core calls rs485_config to do the device specific part in response + to TIOCSRS485 and TIOCGRS485 ioctls (see below). The rs485_config callback + receives a pointer to struct serial_rs485. + +4. Usage from user-level +======================== + + From user-level, RS485 configuration can be get/set using the previous + ioctls. For instance, to set RS485 you can use the following code:: + + #include + + /* Include definition for RS485 ioctls: TIOCGRS485 and TIOCSRS485 */ + #include + + /* Open your specific device (e.g., /dev/mydevice): */ + int fd = open ("/dev/mydevice", O_RDWR); + if (fd < 0) { + /* Error handling. See errno. */ + } + + struct serial_rs485 rs485conf; + + /* Enable RS485 mode: */ + rs485conf.flags |= SER_RS485_ENABLED; + + /* Set logical level for RTS pin equal to 1 when sending: */ + rs485conf.flags |= SER_RS485_RTS_ON_SEND; + /* or, set logical level for RTS pin equal to 0 when sending: */ + rs485conf.flags &= ~(SER_RS485_RTS_ON_SEND); + + /* Set logical level for RTS pin equal to 1 after sending: */ + rs485conf.flags |= SER_RS485_RTS_AFTER_SEND; + /* or, set logical level for RTS pin equal to 0 after sending: */ + rs485conf.flags &= ~(SER_RS485_RTS_AFTER_SEND); + + /* Set rts delay before send, if needed: */ + rs485conf.delay_rts_before_send = ...; + + /* Set rts delay after send, if needed: */ + rs485conf.delay_rts_after_send = ...; + + /* Set this flag if you want to receive data even while sending data */ + rs485conf.flags |= SER_RS485_RX_DURING_TX; + + if (ioctl (fd, TIOCSRS485, &rs485conf) < 0) { + /* Error handling. See errno. */ + } + + /* Use read() and write() syscalls here... */ + + /* Close the device when finished: */ + if (close (fd) < 0) { + /* Error handling. See errno. */ + } + +5. References +============= + + [1] include/uapi/linux/serial.h + + [2] Documentation/devicetree/bindings/serial/rs485.txt diff --git a/Documentation/driver-api/serial/tty.rst b/Documentation/driver-api/serial/tty.rst new file mode 100644 index 000000000000..dd972caacf3e --- /dev/null +++ b/Documentation/driver-api/serial/tty.rst @@ -0,0 +1,328 @@ +================= +The Lockronomicon +================= + +Your guide to the ancient and twisted locking policies of the tty layer and +the warped logic behind them. Beware all ye who read on. + + +Line Discipline +--------------- + +Line disciplines are registered with tty_register_ldisc() passing the +discipline number and the ldisc structure. At the point of registration the +discipline must be ready to use and it is possible it will get used before +the call returns success. If the call returns an error then it won't get +called. Do not re-use ldisc numbers as they are part of the userspace ABI +and writing over an existing ldisc will cause demons to eat your computer. +After the return the ldisc data has been copied so you may free your own +copy of the structure. You must not re-register over the top of the line +discipline even with the same data or your computer again will be eaten by +demons. + +In order to remove a line discipline call tty_unregister_ldisc(). +In ancient times this always worked. In modern times the function will +return -EBUSY if the ldisc is currently in use. Since the ldisc referencing +code manages the module counts this should not usually be a concern. + +Heed this warning: the reference count field of the registered copies of the +tty_ldisc structure in the ldisc table counts the number of lines using this +discipline. The reference count of the tty_ldisc structure within a tty +counts the number of active users of the ldisc at this instant. In effect it +counts the number of threads of execution within an ldisc method (plus those +about to enter and exit although this detail matters not). + +Line Discipline Methods +----------------------- + +TTY side interfaces +^^^^^^^^^^^^^^^^^^^ + +======================= ======================================================= +open() Called when the line discipline is attached to + the terminal. No other call into the line + discipline for this tty will occur until it + completes successfully. Should initialize any + state needed by the ldisc, and set receive_room + in the tty_struct to the maximum amount of data + the line discipline is willing to accept from the + driver with a single call to receive_buf(). + Returning an error will prevent the ldisc from + being attached. Can sleep. + +close() This is called on a terminal when the line + discipline is being unplugged. At the point of + execution no further users will enter the + ldisc code for this tty. Can sleep. + +hangup() Called when the tty line is hung up. + The line discipline should cease I/O to the tty. + No further calls into the ldisc code will occur. + The return value is ignored. Can sleep. + +read() (optional) A process requests reading data from + the line. Multiple read calls may occur in parallel + and the ldisc must deal with serialization issues. + If not defined, the process will receive an EIO + error. May sleep. + +write() (optional) A process requests writing data to the + line. Multiple write calls are serialized by the + tty layer for the ldisc. If not defined, the + process will receive an EIO error. May sleep. + +flush_buffer() (optional) May be called at any point between + open and close, and instructs the line discipline + to empty its input buffer. + +set_termios() (optional) Called on termios structure changes. + The caller passes the old termios data and the + current data is in the tty. Called under the + termios semaphore so allowed to sleep. Serialized + against itself only. + +poll() (optional) Check the status for the poll/select + calls. Multiple poll calls may occur in parallel. + May sleep. + +ioctl() (optional) Called when an ioctl is handed to the + tty layer that might be for the ldisc. Multiple + ioctl calls may occur in parallel. May sleep. + +compat_ioctl() (optional) Called when a 32 bit ioctl is handed + to the tty layer that might be for the ldisc. + Multiple ioctl calls may occur in parallel. + May sleep. +======================= ======================================================= + +Driver Side Interfaces +^^^^^^^^^^^^^^^^^^^^^^ + +======================= ======================================================= +receive_buf() (optional) Called by the low-level driver to hand + a buffer of received bytes to the ldisc for + processing. The number of bytes is guaranteed not + to exceed the current value of tty->receive_room. + All bytes must be processed. + +receive_buf2() (optional) Called by the low-level driver to hand + a buffer of received bytes to the ldisc for + processing. Returns the number of bytes processed. + + If both receive_buf() and receive_buf2() are + defined, receive_buf2() should be preferred. + +write_wakeup() May be called at any point between open and close. + The TTY_DO_WRITE_WAKEUP flag indicates if a call + is needed but always races versus calls. Thus the + ldisc must be careful about setting order and to + handle unexpected calls. Must not sleep. + + The driver is forbidden from calling this directly + from the ->write call from the ldisc as the ldisc + is permitted to call the driver write method from + this function. In such a situation defer it. + +dcd_change() Report to the tty line the current DCD pin status + changes and the relative timestamp. The timestamp + cannot be NULL. +======================= ======================================================= + + +Driver Access +^^^^^^^^^^^^^ + +Line discipline methods can call the following methods of the underlying +hardware driver through the function pointers within the tty->driver +structure: + +======================= ======================================================= +write() Write a block of characters to the tty device. + Returns the number of characters accepted. The + character buffer passed to this method is already + in kernel space. + +put_char() Queues a character for writing to the tty device. + If there is no room in the queue, the character is + ignored. + +flush_chars() (Optional) If defined, must be called after + queueing characters with put_char() in order to + start transmission. + +write_room() Returns the numbers of characters the tty driver + will accept for queueing to be written. + +ioctl() Invoke device specific ioctl. + Expects data pointers to refer to userspace. + Returns ENOIOCTLCMD for unrecognized ioctl numbers. + +set_termios() Notify the tty driver that the device's termios + settings have changed. New settings are in + tty->termios. Previous settings should be passed in + the "old" argument. + + The API is defined such that the driver should return + the actual modes selected. This means that the + driver function is responsible for modifying any + bits in the request it cannot fulfill to indicate + the actual modes being used. A device with no + hardware capability for change (e.g. a USB dongle or + virtual port) can provide NULL for this method. + +throttle() Notify the tty driver that input buffers for the + line discipline are close to full, and it should + somehow signal that no more characters should be + sent to the tty. + +unthrottle() Notify the tty driver that characters can now be + sent to the tty without fear of overrunning the + input buffers of the line disciplines. + +stop() Ask the tty driver to stop outputting characters + to the tty device. + +start() Ask the tty driver to resume sending characters + to the tty device. + +hangup() Ask the tty driver to hang up the tty device. + +break_ctl() (Optional) Ask the tty driver to turn on or off + BREAK status on the RS-232 port. If state is -1, + then the BREAK status should be turned on; if + state is 0, then BREAK should be turned off. + If this routine is not implemented, use ioctls + TIOCSBRK / TIOCCBRK instead. + +wait_until_sent() Waits until the device has written out all of the + characters in its transmitter FIFO. + +send_xchar() Send a high-priority XON/XOFF character to the device. +======================= ======================================================= + + +Flags +^^^^^ + +Line discipline methods have access to tty->flags field containing the +following interesting flags: + +======================= ======================================================= +TTY_THROTTLED Driver input is throttled. The ldisc should call + tty->driver->unthrottle() in order to resume + reception when it is ready to process more data. + +TTY_DO_WRITE_WAKEUP If set, causes the driver to call the ldisc's + write_wakeup() method in order to resume + transmission when it can accept more data + to transmit. + +TTY_IO_ERROR If set, causes all subsequent userspace read/write + calls on the tty to fail, returning -EIO. + +TTY_OTHER_CLOSED Device is a pty and the other side has closed. + +TTY_NO_WRITE_SPLIT Prevent driver from splitting up writes into + smaller chunks. +======================= ======================================================= + + +Locking +^^^^^^^ + +Callers to the line discipline functions from the tty layer are required to +take line discipline locks. The same is true of calls from the driver side +but not yet enforced. + +Three calls are now provided:: + + ldisc = tty_ldisc_ref(tty); + +takes a handle to the line discipline in the tty and returns it. If no ldisc +is currently attached or the ldisc is being closed and re-opened at this +point then NULL is returned. While this handle is held the ldisc will not +change or go away:: + + tty_ldisc_deref(ldisc) + +Returns the ldisc reference and allows the ldisc to be closed. Returning the +reference takes away your right to call the ldisc functions until you take +a new reference:: + + ldisc = tty_ldisc_ref_wait(tty); + +Performs the same function as tty_ldisc_ref except that it will wait for an +ldisc change to complete and then return a reference to the new ldisc. + +While these functions are slightly slower than the old code they should have +minimal impact as most receive logic uses the flip buffers and they only +need to take a reference when they push bits up through the driver. + +A caution: The ldisc->open(), ldisc->close() and driver->set_ldisc +functions are called with the ldisc unavailable. Thus tty_ldisc_ref will +fail in this situation if used within these functions. Ldisc and driver +code calling its own functions must be careful in this case. + + +Driver Interface +---------------- + +======================= ======================================================= +open() Called when a device is opened. May sleep + +close() Called when a device is closed. At the point of + return from this call the driver must make no + further ldisc calls of any kind. May sleep + +write() Called to write bytes to the device. May not + sleep. May occur in parallel in special cases. + Because this includes panic paths drivers generally + shouldn't try and do clever locking here. + +put_char() Stuff a single character onto the queue. The + driver is guaranteed following up calls to + flush_chars. + +flush_chars() Ask the kernel to write put_char queue + +write_room() Return the number of characters that can be stuffed + into the port buffers without overflow (or less). + The ldisc is responsible for being intelligent + about multi-threading of write_room/write calls + +ioctl() Called when an ioctl may be for the driver + +set_termios() Called on termios change, serialized against + itself by a semaphore. May sleep. + +set_ldisc() Notifier for discipline change. At the point this + is done the discipline is not yet usable. Can now + sleep (I think) + +throttle() Called by the ldisc to ask the driver to do flow + control. Serialization including with unthrottle + is the job of the ldisc layer. + +unthrottle() Called by the ldisc to ask the driver to stop flow + control. + +stop() Ldisc notifier to the driver to stop output. As with + throttle the serializations with start() are down + to the ldisc layer. + +start() Ldisc notifier to the driver to start output. + +hangup() Ask the tty driver to cause a hangup initiated + from the host side. [Can sleep ??] + +break_ctl() Send RS232 break. Can sleep. Can get called in + parallel, driver must serialize (for now), and + with write calls. + +wait_until_sent() Wait for characters to exit the hardware queue + of the driver. Can sleep + +send_xchar() Send XON/XOFF and if possible jump the queue with + it in order to get fast flow control responses. + Cannot sleep ?? +======================= ======================================================= diff --git a/Documentation/serial/cyclades_z.rst b/Documentation/serial/cyclades_z.rst deleted file mode 100644 index 532ff67e2f1c..000000000000 --- a/Documentation/serial/cyclades_z.rst +++ /dev/null @@ -1,11 +0,0 @@ -================ -Cyclades-Z notes -================ - -The Cyclades-Z must have firmware loaded onto the card before it will -operate. This operation should be performed during system startup, - -The firmware, loader program and the latest device driver code are -available from Cyclades at - - ftp://ftp.cyclades.com/pub/cyclades/cyclades-z/linux/ diff --git a/Documentation/serial/driver.rst b/Documentation/serial/driver.rst deleted file mode 100644 index 4537119bf624..000000000000 --- a/Documentation/serial/driver.rst +++ /dev/null @@ -1,549 +0,0 @@ -==================== -Low Level Serial API -==================== - - -This document is meant as a brief overview of some aspects of the new serial -driver. It is not complete, any questions you have should be directed to - - -The reference implementation is contained within amba-pl011.c. - - - -Low Level Serial Hardware Driver --------------------------------- - -The low level serial hardware driver is responsible for supplying port -information (defined by uart_port) and a set of control methods (defined -by uart_ops) to the core serial driver. The low level driver is also -responsible for handling interrupts for the port, and providing any -console support. - - -Console Support ---------------- - -The serial core provides a few helper functions. This includes identifing -the correct port structure (via uart_get_console) and decoding command line -arguments (uart_parse_options). - -There is also a helper function (uart_console_write) which performs a -character by character write, translating newlines to CRLF sequences. -Driver writers are recommended to use this function rather than implementing -their own version. - - -Locking -------- - -It is the responsibility of the low level hardware driver to perform the -necessary locking using port->lock. There are some exceptions (which -are described in the uart_ops listing below.) - -There are two locks. A per-port spinlock, and an overall semaphore. - -From the core driver perspective, the port->lock locks the following -data:: - - port->mctrl - port->icount - port->state->xmit.head (circ_buf->head) - port->state->xmit.tail (circ_buf->tail) - -The low level driver is free to use this lock to provide any additional -locking. - -The port_sem semaphore is used to protect against ports being added/ -removed or reconfigured at inappropriate times. Since v2.6.27, this -semaphore has been the 'mutex' member of the tty_port struct, and -commonly referred to as the port mutex. - - -uart_ops --------- - -The uart_ops structure is the main interface between serial_core and the -hardware specific driver. It contains all the methods to control the -hardware. - - tx_empty(port) - This function tests whether the transmitter fifo and shifter - for the port described by 'port' is empty. If it is empty, - this function should return TIOCSER_TEMT, otherwise return 0. - If the port does not support this operation, then it should - return TIOCSER_TEMT. - - Locking: none. - - Interrupts: caller dependent. - - This call must not sleep - - set_mctrl(port, mctrl) - This function sets the modem control lines for port described - by 'port' to the state described by mctrl. The relevant bits - of mctrl are: - - - TIOCM_RTS RTS signal. - - TIOCM_DTR DTR signal. - - TIOCM_OUT1 OUT1 signal. - - TIOCM_OUT2 OUT2 signal. - - TIOCM_LOOP Set the port into loopback mode. - - If the appropriate bit is set, the signal should be driven - active. If the bit is clear, the signal should be driven - inactive. - - Locking: port->lock taken. - - Interrupts: locally disabled. - - This call must not sleep - - get_mctrl(port) - Returns the current state of modem control inputs. The state - of the outputs should not be returned, since the core keeps - track of their state. The state information should include: - - - TIOCM_CAR state of DCD signal - - TIOCM_CTS state of CTS signal - - TIOCM_DSR state of DSR signal - - TIOCM_RI state of RI signal - - The bit is set if the signal is currently driven active. If - the port does not support CTS, DCD or DSR, the driver should - indicate that the signal is permanently active. If RI is - not available, the signal should not be indicated as active. - - Locking: port->lock taken. - - Interrupts: locally disabled. - - This call must not sleep - - stop_tx(port) - Stop transmitting characters. This might be due to the CTS - line becoming inactive or the tty layer indicating we want - to stop transmission due to an XOFF character. - - The driver should stop transmitting characters as soon as - possible. - - Locking: port->lock taken. - - Interrupts: locally disabled. - - This call must not sleep - - start_tx(port) - Start transmitting characters. - - Locking: port->lock taken. - - Interrupts: locally disabled. - - This call must not sleep - - throttle(port) - Notify the serial driver that input buffers for the line discipline are - close to full, and it should somehow signal that no more characters - should be sent to the serial port. - This will be called only if hardware assisted flow control is enabled. - - Locking: serialized with .unthrottle() and termios modification by the - tty layer. - - unthrottle(port) - Notify the serial driver that characters can now be sent to the serial - port without fear of overrunning the input buffers of the line - disciplines. - - This will be called only if hardware assisted flow control is enabled. - - Locking: serialized with .throttle() and termios modification by the - tty layer. - - send_xchar(port,ch) - Transmit a high priority character, even if the port is stopped. - This is used to implement XON/XOFF flow control and tcflow(). If - the serial driver does not implement this function, the tty core - will append the character to the circular buffer and then call - start_tx() / stop_tx() to flush the data out. - - Do not transmit if ch == '\0' (__DISABLED_CHAR). - - Locking: none. - - Interrupts: caller dependent. - - stop_rx(port) - Stop receiving characters; the port is in the process of - being closed. - - Locking: port->lock taken. - - Interrupts: locally disabled. - - This call must not sleep - - enable_ms(port) - Enable the modem status interrupts. - - This method may be called multiple times. Modem status - interrupts should be disabled when the shutdown method is - called. - - Locking: port->lock taken. - - Interrupts: locally disabled. - - This call must not sleep - - break_ctl(port,ctl) - Control the transmission of a break signal. If ctl is - nonzero, the break signal should be transmitted. The signal - should be terminated when another call is made with a zero - ctl. - - Locking: caller holds tty_port->mutex - - startup(port) - Grab any interrupt resources and initialise any low level driver - state. Enable the port for reception. It should not activate - RTS nor DTR; this will be done via a separate call to set_mctrl. - - This method will only be called when the port is initially opened. - - Locking: port_sem taken. - - Interrupts: globally disabled. - - shutdown(port) - Disable the port, disable any break condition that may be in - effect, and free any interrupt resources. It should not disable - RTS nor DTR; this will have already been done via a separate - call to set_mctrl. - - Drivers must not access port->state once this call has completed. - - This method will only be called when there are no more users of - this port. - - Locking: port_sem taken. - - Interrupts: caller dependent. - - flush_buffer(port) - Flush any write buffers, reset any DMA state and stop any - ongoing DMA transfers. - - This will be called whenever the port->state->xmit circular - buffer is cleared. - - Locking: port->lock taken. - - Interrupts: locally disabled. - - This call must not sleep - - set_termios(port,termios,oldtermios) - Change the port parameters, including word length, parity, stop - bits. Update read_status_mask and ignore_status_mask to indicate - the types of events we are interested in receiving. Relevant - termios->c_cflag bits are: - - CSIZE - - word size - CSTOPB - - 2 stop bits - PARENB - - parity enable - PARODD - - odd parity (when PARENB is in force) - CREAD - - enable reception of characters (if not set, - still receive characters from the port, but - throw them away. - CRTSCTS - - if set, enable CTS status change reporting - CLOCAL - - if not set, enable modem status change - reporting. - - Relevant termios->c_iflag bits are: - - INPCK - - enable frame and parity error events to be - passed to the TTY layer. - BRKINT / PARMRK - - both of these enable break events to be - passed to the TTY layer. - - IGNPAR - - ignore parity and framing errors - IGNBRK - - ignore break errors, If IGNPAR is also - set, ignore overrun errors as well. - - The interaction of the iflag bits is as follows (parity error - given as an example): - - =============== ======= ====== ============================= - Parity error INPCK IGNPAR - =============== ======= ====== ============================= - n/a 0 n/a character received, marked as - TTY_NORMAL - None 1 n/a character received, marked as - TTY_NORMAL - Yes 1 0 character received, marked as - TTY_PARITY - Yes 1 1 character discarded - =============== ======= ====== ============================= - - Other flags may be used (eg, xon/xoff characters) if your - hardware supports hardware "soft" flow control. - - Locking: caller holds tty_port->mutex - - Interrupts: caller dependent. - - This call must not sleep - - set_ldisc(port,termios) - Notifier for discipline change. See Documentation/serial/tty.rst. - - Locking: caller holds tty_port->mutex - - pm(port,state,oldstate) - Perform any power management related activities on the specified - port. State indicates the new state (defined by - enum uart_pm_state), oldstate indicates the previous state. - - This function should not be used to grab any resources. - - This will be called when the port is initially opened and finally - closed, except when the port is also the system console. This - will occur even if CONFIG_PM is not set. - - Locking: none. - - Interrupts: caller dependent. - - type(port) - Return a pointer to a string constant describing the specified - port, or return NULL, in which case the string 'unknown' is - substituted. - - Locking: none. - - Interrupts: caller dependent. - - release_port(port) - Release any memory and IO region resources currently in use by - the port. - - Locking: none. - - Interrupts: caller dependent. - - request_port(port) - Request any memory and IO region resources required by the port. - If any fail, no resources should be registered when this function - returns, and it should return -EBUSY on failure. - - Locking: none. - - Interrupts: caller dependent. - - config_port(port,type) - Perform any autoconfiguration steps required for the port. `type` - contains a bit mask of the required configuration. UART_CONFIG_TYPE - indicates that the port requires detection and identification. - port->type should be set to the type found, or PORT_UNKNOWN if - no port was detected. - - UART_CONFIG_IRQ indicates autoconfiguration of the interrupt signal, - which should be probed using standard kernel autoprobing techniques. - This is not necessary on platforms where ports have interrupts - internally hard wired (eg, system on a chip implementations). - - Locking: none. - - Interrupts: caller dependent. - - verify_port(port,serinfo) - Verify the new serial port information contained within serinfo is - suitable for this port type. - - Locking: none. - - Interrupts: caller dependent. - - ioctl(port,cmd,arg) - Perform any port specific IOCTLs. IOCTL commands must be defined - using the standard numbering system found in - - Locking: none. - - Interrupts: caller dependent. - - poll_init(port) - Called by kgdb to perform the minimal hardware initialization needed - to support poll_put_char() and poll_get_char(). Unlike ->startup() - this should not request interrupts. - - Locking: tty_mutex and tty_port->mutex taken. - - Interrupts: n/a. - - poll_put_char(port,ch) - Called by kgdb to write a single character directly to the serial - port. It can and should block until there is space in the TX FIFO. - - Locking: none. - - Interrupts: caller dependent. - - This call must not sleep - - poll_get_char(port) - Called by kgdb to read a single character directly from the serial - port. If data is available, it should be returned; otherwise - the function should return NO_POLL_CHAR immediately. - - Locking: none. - - Interrupts: caller dependent. - - This call must not sleep - -Other functions ---------------- - -uart_update_timeout(port,cflag,baud) - Update the FIFO drain timeout, port->timeout, according to the - number of bits, parity, stop bits and baud rate. - - Locking: caller is expected to take port->lock - - Interrupts: n/a - -uart_get_baud_rate(port,termios,old,min,max) - Return the numeric baud rate for the specified termios, taking - account of the special 38400 baud "kludge". The B0 baud rate - is mapped to 9600 baud. - - If the baud rate is not within min..max, then if old is non-NULL, - the original baud rate will be tried. If that exceeds the - min..max constraint, 9600 baud will be returned. termios will - be updated to the baud rate in use. - - Note: min..max must always allow 9600 baud to be selected. - - Locking: caller dependent. - - Interrupts: n/a - -uart_get_divisor(port,baud) - Return the divisor (baud_base / baud) for the specified baud - rate, appropriately rounded. - - If 38400 baud and custom divisor is selected, return the - custom divisor instead. - - Locking: caller dependent. - - Interrupts: n/a - -uart_match_port(port1,port2) - This utility function can be used to determine whether two - uart_port structures describe the same port. - - Locking: n/a - - Interrupts: n/a - -uart_write_wakeup(port) - A driver is expected to call this function when the number of - characters in the transmit buffer have dropped below a threshold. - - Locking: port->lock should be held. - - Interrupts: n/a - -uart_register_driver(drv) - Register a uart driver with the core driver. We in turn register - with the tty layer, and initialise the core driver per-port state. - - drv->port should be NULL, and the per-port structures should be - registered using uart_add_one_port after this call has succeeded. - - Locking: none - - Interrupts: enabled - -uart_unregister_driver() - Remove all references to a driver from the core driver. The low - level driver must have removed all its ports via the - uart_remove_one_port() if it registered them with uart_add_one_port(). - - Locking: none - - Interrupts: enabled - -**uart_suspend_port()** - -**uart_resume_port()** - -**uart_add_one_port()** - -**uart_remove_one_port()** - -Other notes ------------ - -It is intended some day to drop the 'unused' entries from uart_port, and -allow low level drivers to register their own individual uart_port's with -the core. This will allow drivers to use uart_port as a pointer to a -structure containing both the uart_port entry with their own extensions, -thus:: - - struct my_port { - struct uart_port port; - int my_stuff; - }; - -Modem control lines via GPIO ----------------------------- - -Some helpers are provided in order to set/get modem control lines via GPIO. - -mctrl_gpio_init(port, idx): - This will get the {cts,rts,...}-gpios from device tree if they are - present and request them, set direction etc, and return an - allocated structure. `devm_*` functions are used, so there's no need - to call mctrl_gpio_free(). - As this sets up the irq handling make sure to not handle changes to the - gpio input lines in your driver, too. - -mctrl_gpio_free(dev, gpios): - This will free the requested gpios in mctrl_gpio_init(). - As `devm_*` functions are used, there's generally no need to call - this function. - -mctrl_gpio_to_gpiod(gpios, gidx) - This returns the gpio_desc structure associated to the modem line - index. - -mctrl_gpio_set(gpios, mctrl): - This will sets the gpios according to the mctrl state. - -mctrl_gpio_get(gpios, mctrl): - This will update mctrl with the gpios values. - -mctrl_gpio_enable_ms(gpios): - Enables irqs and handling of changes to the ms lines. - -mctrl_gpio_disable_ms(gpios): - Disables irqs and handling of changes to the ms lines. diff --git a/Documentation/serial/index.rst b/Documentation/serial/index.rst deleted file mode 100644 index d0ba22ea23bf..000000000000 --- a/Documentation/serial/index.rst +++ /dev/null @@ -1,32 +0,0 @@ -:orphan: - -========================== -Support for Serial devices -========================== - -.. toctree:: - :maxdepth: 1 - - - driver - tty - -Serial drivers -============== - -.. toctree:: - :maxdepth: 1 - - cyclades_z - moxa-smartio - n_gsm - rocket - serial-iso7816 - serial-rs485 - -.. only:: subproject and html - - Indices - ======= - - * :ref:`genindex` diff --git a/Documentation/serial/moxa-smartio.rst b/Documentation/serial/moxa-smartio.rst deleted file mode 100644 index 156100f17c3f..000000000000 --- a/Documentation/serial/moxa-smartio.rst +++ /dev/null @@ -1,615 +0,0 @@ -============================================================= -MOXA Smartio/Industio Family Device Driver Installation Guide -============================================================= - -.. note:: - - This file is outdated. It needs some care in order to make it - updated to Kernel 5.0 and upper - -Copyright (C) 2008, Moxa Inc. - -Date: 01/21/2008 - -.. Content - - 1. Introduction - 2. System Requirement - 3. Installation - 3.1 Hardware installation - 3.2 Driver files - 3.3 Device naming convention - 3.4 Module driver configuration - 3.5 Static driver configuration for Linux kernel 2.4.x and 2.6.x. - 3.6 Custom configuration - 3.7 Verify driver installation - 4. Utilities - 5. Setserial - 6. Troubleshooting - -1. Introduction -^^^^^^^^^^^^^^^ - - The Smartio/Industio/UPCI family Linux driver supports following multiport - boards. - - - 2 ports multiport board - CP-102U, CP-102UL, CP-102UF - CP-132U-I, CP-132UL, - CP-132, CP-132I, CP132S, CP-132IS, - CI-132, CI-132I, CI-132IS, - (C102H, C102HI, C102HIS, C102P, CP-102, CP-102S) - - - 4 ports multiport board - CP-104EL, - CP-104UL, CP-104JU, - CP-134U, CP-134U-I, - C104H/PCI, C104HS/PCI, - CP-114, CP-114I, CP-114S, CP-114IS, CP-114UL, - C104H, C104HS, - CI-104J, CI-104JS, - CI-134, CI-134I, CI-134IS, - (C114HI, CT-114I, C104P), - POS-104UL, - CB-114, - CB-134I - - - 8 ports multiport board - CP-118EL, CP-168EL, - CP-118U, CP-168U, - C168H/PCI, - C168H, C168HS, - (C168P), - CB-108 - - This driver and installation procedure have been developed upon Linux Kernel - 2.4.x and 2.6.x. This driver supports Intel x86 hardware platform. In order - to maintain compatibility, this version has also been properly tested with - RedHat, Mandrake, Fedora and S.u.S.E Linux. However, if compatibility problem - occurs, please contact Moxa at support@moxa.com.tw. - - In addition to device driver, useful utilities are also provided in this - version. They are: - - - msdiag - Diagnostic program for displaying installed Moxa - Smartio/Industio boards. - - msmon - Monitor program to observe data count and line status signals. - - msterm A simple terminal program which is useful in testing serial - ports. - - io-irq.exe - Configuration program to setup ISA boards. Please note that - this program can only be executed under DOS. - - All the drivers and utilities are published in form of source code under - GNU General Public License in this version. Please refer to GNU General - Public License announcement in each source code file for more detail. - - In Moxa's Web sites, you may always find latest driver at http://www.moxa.com/. - - This version of driver can be installed as Loadable Module (Module driver) - or built-in into kernel (Static driver). You may refer to following - installation procedure for suitable one. Before you install the driver, - please refer to hardware installation procedure in the User's Manual. - - We assume the user should be familiar with following documents. - - - Serial-HOWTO - - Kernel-HOWTO - -2. System Requirement -^^^^^^^^^^^^^^^^^^^^^ - - - Hardware platform: Intel x86 machine - - Kernel version: 2.4.x or 2.6.x - - gcc version 2.72 or later - - Maximum 4 boards can be installed in combination - -3. Installation -^^^^^^^^^^^^^^^ - -3.1 Hardware installation -========================= - - There are two types of buses, ISA and PCI, for Smartio/Industio - family multiport board. - -ISA board ---------- - - You'll have to configure CAP address, I/O address, Interrupt Vector - as well as IRQ before installing this driver. Please refer to hardware - installation procedure in User's Manual before proceed any further. - Please make sure the JP1 is open after the ISA board is set properly. - -PCI/UPCI board --------------- - - You may need to adjust IRQ usage in BIOS to avoid from IRQ conflict - with other ISA devices. Please refer to hardware installation - procedure in User's Manual in advance. - -PCI IRQ Sharing ---------------- - - Each port within the same multiport board shares the same IRQ. Up to - 4 Moxa Smartio/Industio PCI Family multiport boards can be installed - together on one system and they can share the same IRQ. - - -3.2 Driver files -================ - - The driver file may be obtained from ftp, CD-ROM or floppy disk. The - first step, anyway, is to copy driver file "mxser.tgz" into specified - directory. e.g. /moxa. The execute commands as below:: - - # cd / - # mkdir moxa - # cd /moxa - # tar xvf /dev/fd0 - -or:: - - # cd / - # mkdir moxa - # cd /moxa - # cp /mnt/cdrom//mxser.tgz . - # tar xvfz mxser.tgz - - -3.3 Device naming convention -============================ - - You may find all the driver and utilities files in /moxa/mxser. - Following installation procedure depends on the model you'd like to - run the driver. If you prefer module driver, please refer to 3.4. - If static driver is required, please refer to 3.5. - -Dialin and callout port ------------------------ - - This driver remains traditional serial device properties. There are - two special file name for each serial port. One is dial-in port - which is named "ttyMxx". For callout port, the naming convention - is "cumxx". - -Device naming when more than 2 boards installed ------------------------------------------------ - - Naming convention for each Smartio/Industio multiport board is - pre-defined as below. - - ============ =============== ============== - Board Num. Dial-in Port Callout port - 1st board ttyM0 - ttyM7 cum0 - cum7 - 2nd board ttyM8 - ttyM15 cum8 - cum15 - 3rd board ttyM16 - ttyM23 cum16 - cum23 - 4th board ttyM24 - ttym31 cum24 - cum31 - ============ =============== ============== - -.. note:: - - Under Kernel 2.6 and upper, the cum Device is Obsolete. So use ttyM* - device instead. - -Board sequence --------------- - - This driver will activate ISA boards according to the parameter set - in the driver. After all specified ISA board activated, PCI board - will be installed in the system automatically driven. - Therefore the board number is sorted by the CAP address of ISA boards. - For PCI boards, their sequence will be after ISA boards and C168H/PCI - has higher priority than C104H/PCI boards. - -3.4 Module driver configuration -=============================== - - Module driver is easiest way to install. If you prefer static driver - installation, please skip this paragraph. - - - ------------- Prepare to use the MOXA driver -------------------- - -3.4.1 Create tty device with correct major number -------------------------------------------------- - - Before using MOXA driver, your system must have the tty devices - which are created with driver's major number. We offer one shell - script "msmknod" to simplify the procedure. - This step is only needed to be executed once. But you still - need to do this procedure when: - - a. You change the driver's major number. Please refer the "3.7" - section. - b. Your total installed MOXA boards number is changed. Maybe you - add/delete one MOXA board. - c. You want to change the tty name. This needs to modify the - shell script "msmknod" - - The procedure is:: - - # cd /moxa/mxser/driver - # ./msmknod - - This shell script will require the major number for dial-in - device and callout device to create tty device. You also need - to specify the total installed MOXA board number. Default major - numbers for dial-in device and callout device are 30, 35. If - you need to change to other number, please refer section "3.7" - for more detailed procedure. - Msmknod will delete any special files occupying the same device - naming. - -3.4.2 Build the MOXA driver and utilities ------------------------------------------ - - Before using the MOXA driver and utilities, you need compile the - all the source code. This step is only need to be executed once. - But you still re-compile the source code if you modify the source - code. For example, if you change the driver's major number (see - "3.7" section), then you need to do this step again. - - Find "Makefile" in /moxa/mxser, then run - - # make clean; make install - - ..note:: - - For Red Hat 9, Red Hat Enterprise Linux AS3/ES3/WS3 & Fedora Core1: - # make clean; make installsp1 - - For Red Hat Enterprise Linux AS4/ES4/WS4: - # make clean; make installsp2 - - The driver files "mxser.o" and utilities will be properly compiled - and copied to system directories respectively. - -------------- Load MOXA driver-------------------- - -3.4.3 Load the MOXA driver --------------------------- - - :: - - # modprobe mxser - - will activate the module driver. You may run "lsmod" to check - if "mxser" is activated. If the MOXA board is ISA board, the - is needed. Please refer to section "3.4.5" for more - information. - -------------- Load MOXA driver on boot -------------------- - -3.4.4 Load the mxser driver ---------------------------- - - - For the above description, you may manually execute - "modprobe mxser" to activate this driver and run - "rmmod mxser" to remove it. - - However, it's better to have a boot time configuration to - eliminate manual operation. Boot time configuration can be - achieved by rc file. We offer one "rc.mxser" file to simplify - the procedure under "moxa/mxser/driver". - - But if you use ISA board, please modify the "modprobe ..." command - to add the argument (see "3.4.5" section). After modifying the - rc.mxser, please try to execute "/moxa/mxser/driver/rc.mxser" - manually to make sure the modification is ok. If any error - encountered, please try to modify again. If the modification is - completed, follow the below step. - - Run following command for setting rc files:: - - # cd /moxa/mxser/driver - # cp ./rc.mxser /etc/rc.d - # cd /etc/rc.d - - Check "rc.serial" is existed or not. If "rc.serial" doesn't exist, - create it by vi, run "chmod 755 rc.serial" to change the permission. - - Add "/etc/rc.d/rc.mxser" in last line. - - Reboot and check if moxa.o activated by "lsmod" command. - -3.4.5. specify CAP address --------------------------- - - If you'd like to drive Smartio/Industio ISA boards in the system, - you'll have to add parameter to specify CAP address of given - board while activating "mxser.o". The format for parameters are - as follows.:: - - modprobe mxser ioaddr=0x???,0x???,0x???,0x??? - | | | | - | | | +- 4th ISA board - | | +------ 3rd ISA board - | +------------ 2nd ISA board - +-------------------1st ISA board - -3.5 Static driver configuration for Linux kernel 2.4.x and 2.6.x -================================================================ - - Note: - To use static driver, you must install the linux kernel - source package. - -3.5.1 Backup the built-in driver in the kernel ----------------------------------------------- - - :: - - # cd /usr/src/linux/drivers/char - # mv mxser.c mxser.c.old - - For Red Hat 7.x user, you need to create link: - # cd /usr/src - # ln -s linux-2.4 linux - -3.5.2 Create link ------------------ - :: - - # cd /usr/src/linux/drivers/char - # ln -s /moxa/mxser/driver/mxser.c mxser.c - -3.5.3 Add CAP address list for ISA boards. ------------------------------------------- - - For PCI boards user, please skip this step. - - In module mode, the CAP address for ISA board is given by - parameter. In static driver configuration, you'll have to - assign it within driver's source code. If you will not - install any ISA boards, you may skip to next portion. - The instructions to modify driver source code are as - below. - - a. run:: - - # cd /moxa/mxser/driver - # vi mxser.c - - b. Find the array mxserBoardCAP[] as below:: - - static int mxserBoardCAP[] = {0x00, 0x00, 0x00, 0x00}; - - c. Change the address within this array using vi. For - example, to driver 2 ISA boards with CAP address - 0x280 and 0x180 as 1st and 2nd board. Just to change - the source code as follows:: - - static int mxserBoardCAP[] = {0x280, 0x180, 0x00, 0x00}; - -3.5.4 Setup kernel configuration --------------------------------- - - Configure the kernel:: - - # cd /usr/src/linux - # make menuconfig - - You will go into a menu-driven system. Please select [Character - devices][Non-standard serial port support], enable the [Moxa - SmartIO support] driver with "[*]" for built-in (not "[M]"), then - select [Exit] to exit this program. - -3.5.5 Rebuild kernel --------------------- - - The following are for Linux kernel rebuilding, for your - reference only. - - For appropriate details, please refer to the Linux document: - - a. Run the following commands:: - - cd /usr/src/linux - make clean # take a few minutes - make dep # take a few minutes - make bzImage # take probably 10-20 minutes - make install # copy boot image to correct position - - f. Please make sure the boot kernel (vmlinuz) is in the - correct position. - g. If you use 'lilo' utility, you should check /etc/lilo.conf - 'image' item specified the path which is the 'vmlinuz' path, - or you will load wrong (or old) boot kernel image (vmlinuz). - After checking /etc/lilo.conf, please run "lilo". - - Note that if the result of "make bzImage" is ERROR, then you have to - go back to Linux configuration Setup. Type "make menuconfig" in - directory /usr/src/linux. - - -3.5.6 Make tty device and special file --------------------------------------- - - :: - # cd /moxa/mxser/driver - # ./msmknod - -3.5.7 Make utility ------------------- - - :: - - # cd /moxa/mxser/utility - # make clean; make install - -3.5.8 Reboot ------------- - - - -3.6 Custom configuration -======================== - - Although this driver already provides you default configuration, you - still can change the device name and major number. The instruction to - change these parameters are shown as below. - -a. Change Device name - - If you'd like to use other device names instead of default naming - convention, all you have to do is to modify the internal code - within the shell script "msmknod". First, you have to open "msmknod" - by vi. Locate each line contains "ttyM" and "cum" and change them - to the device name you desired. "msmknod" creates the device names - you need next time executed. - -b. Change Major number - - If major number 30 and 35 had been occupied, you may have to select - 2 free major numbers for this driver. There are 3 steps to change - major numbers. - -3.6.1 Find free major numbers ------------------------------ - - In /proc/devices, you may find all the major numbers occupied - in the system. Please select 2 major numbers that are available. - e.g. 40, 45. - -3.6.2 Create special files --------------------------- - - Run /moxa/mxser/driver/msmknod to create special files with - specified major numbers. - -3.6.3 Modify driver with new major number ------------------------------------------ - - Run vi to open /moxa/mxser/driver/mxser.c. Locate the line - contains "MXSERMAJOR". Change the content as below:: - - #define MXSERMAJOR 40 - #define MXSERCUMAJOR 45 - - 3.6.4 Run "make clean; make install" in /moxa/mxser/driver. - -3.7 Verify driver installation -============================== - - You may refer to /var/log/messages to check the latest status - log reported by this driver whenever it's activated. - -4. Utilities -^^^^^^^^^^^^ - - There are 3 utilities contained in this driver. They are msdiag, msmon and - msterm. These 3 utilities are released in form of source code. They should - be compiled into executable file and copied into /usr/bin. - - Before using these utilities, please load driver (refer 3.4 & 3.5) and - make sure you had run the "msmknod" utility. - -msdiag - Diagnostic -=================== - - This utility provides the function to display what Moxa Smartio/Industio - board found by driver in the system. - -msmon - Port Monitoring -======================= - - This utility gives the user a quick view about all the MOXA ports' - activities. One can easily learn each port's total received/transmitted - (Rx/Tx) character count since the time when the monitoring is started. - - Rx/Tx throughputs per second are also reported in interval basis (e.g. - the last 5 seconds) and in average basis (since the time the monitoring - is started). You can reset all ports' count by key. <+> <-> - (plus/minus) keys to change the displaying time interval. Press - on the port, that cursor stay, to view the port's communication - parameters, signal status, and input/output queue. - -msterm - Terminal Emulation -=========================== - - This utility provides data sending and receiving ability of all tty ports, - especially for MOXA ports. It is quite useful for testing simple - application, for example, sending AT command to a modem connected to the - port or used as a terminal for login purpose. Note that this is only a - dumb terminal emulation without handling full screen operation. - -5. Setserial -^^^^^^^^^^^^ - - Supported Setserial parameters are listed as below. - - ============== ========================================================= - uart set UART type(16450-->disable FIFO, 16550A-->enable FIFO) - close_delay set the amount of time(in 1/100 of a second) that DTR - should be kept low while being closed. - closing_wait set the amount of time(in 1/100 of a second) that the - serial port should wait for data to be drained while - being closed, before the receiver is disable. - spd_hi Use 57.6kb when the application requests 38.4kb. - spd_vhi Use 115.2kb when the application requests 38.4kb. - spd_shi Use 230.4kb when the application requests 38.4kb. - spd_warp Use 460.8kb when the application requests 38.4kb. - spd_normal Use 38.4kb when the application requests 38.4kb. - spd_cust Use the custom divisor to set the speed when the - application requests 38.4kb. - divisor This option set the custom division. - baud_base This option set the base baud rate. - ============== ========================================================= - -6. Troubleshooting -^^^^^^^^^^^^^^^^^^ - - The boot time error messages and solutions are stated as clearly as - possible. If all the possible solutions fail, please contact our technical - support team to get more help. - - - Error msg: - More than 4 Moxa Smartio/Industio family boards found. Fifth board - and after are ignored. - - Solution: - To avoid this problem, please unplug fifth and after board, because Moxa - driver supports up to 4 boards. - - Error msg: - Request_irq fail, IRQ(?) may be conflict with another device. - - Solution: - Other PCI or ISA devices occupy the assigned IRQ. If you are not sure - which device causes the situation, please check /proc/interrupts to find - free IRQ and simply change another free IRQ for Moxa board. - - Error msg: - Board #: C1xx Series(CAP=xxx) interrupt number invalid. - - Solution: - Each port within the same multiport board shares the same IRQ. Please set - one IRQ (IRQ doesn't equal to zero) for one Moxa board. - - Error msg: - No interrupt vector be set for Moxa ISA board(CAP=xxx). - - Solution: - Moxa ISA board needs an interrupt vector.Please refer to user's manual - "Hardware Installation" chapter to set interrupt vector. - - Error msg: - Couldn't install MOXA Smartio/Industio family driver! - - Solution: - Load Moxa driver fail, the major number may conflict with other devices. - Please refer to previous section 3.7 to change a free major number for - Moxa driver. - - Error msg: - Couldn't install MOXA Smartio/Industio family callout driver! - - Solution: - Load Moxa callout driver fail, the callout device major number may - conflict with other devices. Please refer to previous section 3.7 to - change a free callout device major number for Moxa driver. diff --git a/Documentation/serial/n_gsm.rst b/Documentation/serial/n_gsm.rst deleted file mode 100644 index f3ad9fd26408..000000000000 --- a/Documentation/serial/n_gsm.rst +++ /dev/null @@ -1,103 +0,0 @@ -============================== -GSM 0710 tty multiplexor HOWTO -============================== - -This line discipline implements the GSM 07.10 multiplexing protocol -detailed in the following 3GPP document: - - http://www.3gpp.org/ftp/Specs/archive/07_series/07.10/0710-720.zip - -This document give some hints on how to use this driver with GPRS and 3G -modems connected to a physical serial port. - -How to use it -------------- -1. initialize the modem in 0710 mux mode (usually AT+CMUX= command) through - its serial port. Depending on the modem used, you can pass more or less - parameters to this command, -2. switch the serial line to using the n_gsm line discipline by using - TIOCSETD ioctl, -3. configure the mux using GSMIOC_GETCONF / GSMIOC_SETCONF ioctl, - -Major parts of the initialization program : -(a good starting point is util-linux-ng/sys-utils/ldattach.c):: - - #include - #define N_GSM0710 21 /* GSM 0710 Mux */ - #define DEFAULT_SPEED B115200 - #define SERIAL_PORT /dev/ttyS0 - - int ldisc = N_GSM0710; - struct gsm_config c; - struct termios configuration; - - /* open the serial port connected to the modem */ - fd = open(SERIAL_PORT, O_RDWR | O_NOCTTY | O_NDELAY); - - /* configure the serial port : speed, flow control ... */ - - /* send the AT commands to switch the modem to CMUX mode - and check that it's successful (should return OK) */ - write(fd, "AT+CMUX=0\r", 10); - - /* experience showed that some modems need some time before - being able to answer to the first MUX packet so a delay - may be needed here in some case */ - sleep(3); - - /* use n_gsm line discipline */ - ioctl(fd, TIOCSETD, &ldisc); - - /* get n_gsm configuration */ - ioctl(fd, GSMIOC_GETCONF, &c); - /* we are initiator and need encoding 0 (basic) */ - c.initiator = 1; - c.encapsulation = 0; - /* our modem defaults to a maximum size of 127 bytes */ - c.mru = 127; - c.mtu = 127; - /* set the new configuration */ - ioctl(fd, GSMIOC_SETCONF, &c); - - /* and wait for ever to keep the line discipline enabled */ - daemon(0,0); - pause(); - -4. create the devices corresponding to the "virtual" serial ports (take care, - each modem has its configuration and some DLC have dedicated functions, - for example GPS), starting with minor 1 (DLC0 is reserved for the management - of the mux):: - - MAJOR=`cat /proc/devices |grep gsmtty | awk '{print $1}` - for i in `seq 1 4`; do - mknod /dev/ttygsm$i c $MAJOR $i - done - -5. use these devices as plain serial ports. - - for example, it's possible: - - - and to use gnokii to send / receive SMS on ttygsm1 - - to use ppp to establish a datalink on ttygsm2 - -6. first close all virtual ports before closing the physical port. - - Note that after closing the physical port the modem is still in multiplexing - mode. This may prevent a successful re-opening of the port later. To avoid - this situation either reset the modem if your hardware allows that or send - a disconnect command frame manually before initializing the multiplexing mode - for the second time. The byte sequence for the disconnect command frame is:: - - 0xf9, 0x03, 0xef, 0x03, 0xc3, 0x16, 0xf9. - -Additional Documentation ------------------------- -More practical details on the protocol and how it's supported by industrial -modems can be found in the following documents : - -- http://www.telit.com/module/infopool/download.php?id=616 -- http://www.u-blox.com/images/downloads/Product_Docs/LEON-G100-G200-MuxImplementation_ApplicationNote_%28GSM%20G1-CS-10002%29.pdf -- http://www.sierrawireless.com/Support/Downloads/AirPrime/WMP_Series/~/media/Support_Downloads/AirPrime/Application_notes/CMUX_Feature_Application_Note-Rev004.ashx -- http://wm.sim.com/sim/News/photo/2010721161442.pdf - -11-03-08 - Eric Bénard - diff --git a/Documentation/serial/rocket.rst b/Documentation/serial/rocket.rst deleted file mode 100644 index 23761eae4282..000000000000 --- a/Documentation/serial/rocket.rst +++ /dev/null @@ -1,185 +0,0 @@ -================================================ -Comtrol(tm) RocketPort(R)/RocketModem(TM) Series -================================================ - -Device Driver for the Linux Operating System -============================================ - -Product overview ----------------- - -This driver provides a loadable kernel driver for the Comtrol RocketPort -and RocketModem PCI boards. These boards provide, 2, 4, 8, 16, or 32 -high-speed serial ports or modems. This driver supports up to a combination -of four RocketPort or RocketModems boards in one machine simultaneously. -This file assumes that you are using the RocketPort driver which is -integrated into the kernel sources. - -The driver can also be installed as an external module using the usual -"make;make install" routine. This external module driver, obtainable -from the Comtrol website listed below, is useful for updating the driver -or installing it into kernels which do not have the driver configured -into them. Installations instructions for the external module -are in the included README and HW_INSTALL files. - -RocketPort ISA and RocketModem II PCI boards currently are only supported by -this driver in module form. - -The RocketPort ISA board requires I/O ports to be configured by the DIP -switches on the board. See the section "ISA Rocketport Boards" below for -information on how to set the DIP switches. - -You pass the I/O port to the driver using the following module parameters: - -board1: - I/O port for the first ISA board -board2: - I/O port for the second ISA board -board3: - I/O port for the third ISA board -board4: - I/O port for the fourth ISA board - -There is a set of utilities and scripts provided with the external driver -(downloadable from http://www.comtrol.com) that ease the configuration and -setup of the ISA cards. - -The RocketModem II PCI boards require firmware to be loaded into the card -before it will function. The driver has only been tested as a module for this -board. - -Installation Procedures ------------------------ - -RocketPort/RocketModem PCI cards require no driver configuration, they are -automatically detected and configured. - -The RocketPort driver can be installed as a module (recommended) or built -into the kernel. This is selected, as for other drivers, through the `make config` -command from the root of the Linux source tree during the kernel build process. - -The RocketPort/RocketModem serial ports installed by this driver are assigned -device major number 46, and will be named /dev/ttyRx, where x is the port number -starting at zero (ex. /dev/ttyR0, /devttyR1, ...). If you have multiple cards -installed in the system, the mapping of port names to serial ports is displayed -in the system log at /var/log/messages. - -If installed as a module, the module must be loaded. This can be done -manually by entering "modprobe rocket". To have the module loaded automatically -upon system boot, edit a `/etc/modprobe.d/*.conf` file and add the line -"alias char-major-46 rocket". - -In order to use the ports, their device names (nodes) must be created with mknod. -This is only required once, the system will retain the names once created. To -create the RocketPort/RocketModem device names, use the command -"mknod /dev/ttyRx c 46 x" where x is the port number starting at zero. - -For example:: - - > mknod /dev/ttyR0 c 46 0 - > mknod /dev/ttyR1 c 46 1 - > mknod /dev/ttyR2 c 46 2 - -The Linux script MAKEDEV will create the first 16 ttyRx device names (nodes) -for you:: - - >/dev/MAKEDEV ttyR - -ISA Rocketport Boards ---------------------- - -You must assign and configure the I/O addresses used by the ISA Rocketport -card before installing and using it. This is done by setting a set of DIP -switches on the Rocketport board. - - -Setting the I/O address ------------------------ - -Before installing RocketPort(R) or RocketPort RA boards, you must find -a range of I/O addresses for it to use. The first RocketPort card -requires a 68-byte contiguous block of I/O addresses, starting at one -of the following: 0x100h, 0x140h, 0x180h, 0x200h, 0x240h, 0x280h, -0x300h, 0x340h, 0x380h. This I/O address must be reflected in the DIP -switches of *all* of the Rocketport cards. - -The second, third, and fourth RocketPort cards require a 64-byte -contiguous block of I/O addresses, starting at one of the following -I/O addresses: 0x100h, 0x140h, 0x180h, 0x1C0h, 0x200h, 0x240h, 0x280h, -0x2C0h, 0x300h, 0x340h, 0x380h, 0x3C0h. The I/O address used by the -second, third, and fourth Rocketport cards (if present) are set via -software control. The DIP switch settings for the I/O address must be -set to the value of the first Rocketport cards. - -In order to distinguish each of the card from the others, each card -must have a unique board ID set on the dip switches. The first -Rocketport board must be set with the DIP switches corresponding to -the first board, the second board must be set with the DIP switches -corresponding to the second board, etc. IMPORTANT: The board ID is -the only place where the DIP switch settings should differ between the -various Rocketport boards in a system. - -The I/O address range used by any of the RocketPort cards must not -conflict with any other cards in the system, including other -RocketPort cards. Below, you will find a list of commonly used I/O -address ranges which may be in use by other devices in your system. -On a Linux system, "cat /proc/ioports" will also be helpful in -identifying what I/O addresses are being used by devices on your -system. - -Remember, the FIRST RocketPort uses 68 I/O addresses. So, if you set it -for 0x100, it will occupy 0x100 to 0x143. This would mean that you -CAN NOT set the second, third or fourth board for address 0x140 since -the first 4 bytes of that range are used by the first board. You would -need to set the second, third, or fourth board to one of the next available -blocks such as 0x180. - -RocketPort and RocketPort RA SW1 Settings:: - - +-------------------------------+ - | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | - +-------+-------+---------------+ - | Unused| Card | I/O Port Block| - +-------------------------------+ - - DIP Switches DIP Switches - 7 8 6 5 - =================== =================== - On On UNUSED, MUST BE ON. On On First Card <==== Default - On Off Second Card - Off On Third Card - Off Off Fourth Card - - DIP Switches I/O Address Range - 4 3 2 1 Used by the First Card - ===================================== - On Off On Off 100-143 - On Off Off On 140-183 - On Off Off Off 180-1C3 <==== Default - Off On On Off 200-243 - Off On Off On 240-283 - Off On Off Off 280-2C3 - Off Off On Off 300-343 - Off Off Off On 340-383 - Off Off Off Off 380-3C3 - -Reporting Bugs --------------- - -For technical support, please provide the following -information: Driver version, kernel release, distribution of -kernel, and type of board you are using. Error messages and log -printouts port configuration details are especially helpful. - -USA: - :Phone: (612) 494-4100 - :FAX: (612) 494-4199 - :email: support@comtrol.com - -Comtrol Europe: - :Phone: +44 (0) 1 869 323-220 - :FAX: +44 (0) 1 869 323-211 - :email: support@comtrol.co.uk - -Web: http://www.comtrol.com -FTP: ftp.comtrol.com diff --git a/Documentation/serial/serial-iso7816.rst b/Documentation/serial/serial-iso7816.rst deleted file mode 100644 index d990143de0c6..000000000000 --- a/Documentation/serial/serial-iso7816.rst +++ /dev/null @@ -1,90 +0,0 @@ -============================= -ISO7816 Serial Communications -============================= - -1. Introduction -=============== - - ISO/IEC7816 is a series of standards specifying integrated circuit cards (ICC) - also known as smart cards. - -2. Hardware-related considerations -================================== - - Some CPUs/UARTs (e.g., Microchip AT91) contain a built-in mode capable of - handling communication with a smart card. - - For these microcontrollers, the Linux driver should be made capable of - working in both modes, and proper ioctls (see later) should be made - available at user-level to allow switching from one mode to the other, and - vice versa. - -3. Data Structures Already Available in the Kernel -================================================== - - The Linux kernel provides the serial_iso7816 structure (see [1]) to handle - ISO7816 communications. This data structure is used to set and configure - ISO7816 parameters in ioctls. - - Any driver for devices capable of working both as RS232 and ISO7816 should - implement the iso7816_config callback in the uart_port structure. The - serial_core calls iso7816_config to do the device specific part in response - to TIOCGISO7816 and TIOCSISO7816 ioctls (see below). The iso7816_config - callback receives a pointer to struct serial_iso7816. - -4. Usage from user-level -======================== - - From user-level, ISO7816 configuration can be get/set using the previous - ioctls. For instance, to set ISO7816 you can use the following code:: - - #include - - /* Include definition for ISO7816 ioctls: TIOCSISO7816 and TIOCGISO7816 */ - #include - - /* Open your specific device (e.g., /dev/mydevice): */ - int fd = open ("/dev/mydevice", O_RDWR); - if (fd < 0) { - /* Error handling. See errno. */ - } - - struct serial_iso7816 iso7816conf; - - /* Reserved fields as to be zeroed */ - memset(&iso7816conf, 0, sizeof(iso7816conf)); - - /* Enable ISO7816 mode: */ - iso7816conf.flags |= SER_ISO7816_ENABLED; - - /* Select the protocol: */ - /* T=0 */ - iso7816conf.flags |= SER_ISO7816_T(0); - /* or T=1 */ - iso7816conf.flags |= SER_ISO7816_T(1); - - /* Set the guard time: */ - iso7816conf.tg = 2; - - /* Set the clock frequency*/ - iso7816conf.clk = 3571200; - - /* Set transmission factors: */ - iso7816conf.sc_fi = 372; - iso7816conf.sc_di = 1; - - if (ioctl(fd_usart, TIOCSISO7816, &iso7816conf) < 0) { - /* Error handling. See errno. */ - } - - /* Use read() and write() syscalls here... */ - - /* Close the device when finished: */ - if (close (fd) < 0) { - /* Error handling. See errno. */ - } - -5. References -============= - - [1] include/uapi/linux/serial.h diff --git a/Documentation/serial/serial-rs485.rst b/Documentation/serial/serial-rs485.rst deleted file mode 100644 index 6bc824f948f9..000000000000 --- a/Documentation/serial/serial-rs485.rst +++ /dev/null @@ -1,103 +0,0 @@ -=========================== -RS485 Serial Communications -=========================== - -1. Introduction -=============== - - EIA-485, also known as TIA/EIA-485 or RS-485, is a standard defining the - electrical characteristics of drivers and receivers for use in balanced - digital multipoint systems. - This standard is widely used for communications in industrial automation - because it can be used effectively over long distances and in electrically - noisy environments. - -2. Hardware-related Considerations -================================== - - Some CPUs/UARTs (e.g., Atmel AT91 or 16C950 UART) contain a built-in - half-duplex mode capable of automatically controlling line direction by - toggling RTS or DTR signals. That can be used to control external - half-duplex hardware like an RS485 transceiver or any RS232-connected - half-duplex devices like some modems. - - For these microcontrollers, the Linux driver should be made capable of - working in both modes, and proper ioctls (see later) should be made - available at user-level to allow switching from one mode to the other, and - vice versa. - -3. Data Structures Already Available in the Kernel -================================================== - - The Linux kernel provides the serial_rs485 structure (see [1]) to handle - RS485 communications. This data structure is used to set and configure RS485 - parameters in the platform data and in ioctls. - - The device tree can also provide RS485 boot time parameters (see [2] - for bindings). The driver is in charge of filling this data structure from - the values given by the device tree. - - Any driver for devices capable of working both as RS232 and RS485 should - implement the rs485_config callback in the uart_port structure. The - serial_core calls rs485_config to do the device specific part in response - to TIOCSRS485 and TIOCGRS485 ioctls (see below). The rs485_config callback - receives a pointer to struct serial_rs485. - -4. Usage from user-level -======================== - - From user-level, RS485 configuration can be get/set using the previous - ioctls. For instance, to set RS485 you can use the following code:: - - #include - - /* Include definition for RS485 ioctls: TIOCGRS485 and TIOCSRS485 */ - #include - - /* Open your specific device (e.g., /dev/mydevice): */ - int fd = open ("/dev/mydevice", O_RDWR); - if (fd < 0) { - /* Error handling. See errno. */ - } - - struct serial_rs485 rs485conf; - - /* Enable RS485 mode: */ - rs485conf.flags |= SER_RS485_ENABLED; - - /* Set logical level for RTS pin equal to 1 when sending: */ - rs485conf.flags |= SER_RS485_RTS_ON_SEND; - /* or, set logical level for RTS pin equal to 0 when sending: */ - rs485conf.flags &= ~(SER_RS485_RTS_ON_SEND); - - /* Set logical level for RTS pin equal to 1 after sending: */ - rs485conf.flags |= SER_RS485_RTS_AFTER_SEND; - /* or, set logical level for RTS pin equal to 0 after sending: */ - rs485conf.flags &= ~(SER_RS485_RTS_AFTER_SEND); - - /* Set rts delay before send, if needed: */ - rs485conf.delay_rts_before_send = ...; - - /* Set rts delay after send, if needed: */ - rs485conf.delay_rts_after_send = ...; - - /* Set this flag if you want to receive data even while sending data */ - rs485conf.flags |= SER_RS485_RX_DURING_TX; - - if (ioctl (fd, TIOCSRS485, &rs485conf) < 0) { - /* Error handling. See errno. */ - } - - /* Use read() and write() syscalls here... */ - - /* Close the device when finished: */ - if (close (fd) < 0) { - /* Error handling. See errno. */ - } - -5. References -============= - - [1] include/uapi/linux/serial.h - - [2] Documentation/devicetree/bindings/serial/rs485.txt diff --git a/Documentation/serial/tty.rst b/Documentation/serial/tty.rst deleted file mode 100644 index dd972caacf3e..000000000000 --- a/Documentation/serial/tty.rst +++ /dev/null @@ -1,328 +0,0 @@ -================= -The Lockronomicon -================= - -Your guide to the ancient and twisted locking policies of the tty layer and -the warped logic behind them. Beware all ye who read on. - - -Line Discipline ---------------- - -Line disciplines are registered with tty_register_ldisc() passing the -discipline number and the ldisc structure. At the point of registration the -discipline must be ready to use and it is possible it will get used before -the call returns success. If the call returns an error then it won't get -called. Do not re-use ldisc numbers as they are part of the userspace ABI -and writing over an existing ldisc will cause demons to eat your computer. -After the return the ldisc data has been copied so you may free your own -copy of the structure. You must not re-register over the top of the line -discipline even with the same data or your computer again will be eaten by -demons. - -In order to remove a line discipline call tty_unregister_ldisc(). -In ancient times this always worked. In modern times the function will -return -EBUSY if the ldisc is currently in use. Since the ldisc referencing -code manages the module counts this should not usually be a concern. - -Heed this warning: the reference count field of the registered copies of the -tty_ldisc structure in the ldisc table counts the number of lines using this -discipline. The reference count of the tty_ldisc structure within a tty -counts the number of active users of the ldisc at this instant. In effect it -counts the number of threads of execution within an ldisc method (plus those -about to enter and exit although this detail matters not). - -Line Discipline Methods ------------------------ - -TTY side interfaces -^^^^^^^^^^^^^^^^^^^ - -======================= ======================================================= -open() Called when the line discipline is attached to - the terminal. No other call into the line - discipline for this tty will occur until it - completes successfully. Should initialize any - state needed by the ldisc, and set receive_room - in the tty_struct to the maximum amount of data - the line discipline is willing to accept from the - driver with a single call to receive_buf(). - Returning an error will prevent the ldisc from - being attached. Can sleep. - -close() This is called on a terminal when the line - discipline is being unplugged. At the point of - execution no further users will enter the - ldisc code for this tty. Can sleep. - -hangup() Called when the tty line is hung up. - The line discipline should cease I/O to the tty. - No further calls into the ldisc code will occur. - The return value is ignored. Can sleep. - -read() (optional) A process requests reading data from - the line. Multiple read calls may occur in parallel - and the ldisc must deal with serialization issues. - If not defined, the process will receive an EIO - error. May sleep. - -write() (optional) A process requests writing data to the - line. Multiple write calls are serialized by the - tty layer for the ldisc. If not defined, the - process will receive an EIO error. May sleep. - -flush_buffer() (optional) May be called at any point between - open and close, and instructs the line discipline - to empty its input buffer. - -set_termios() (optional) Called on termios structure changes. - The caller passes the old termios data and the - current data is in the tty. Called under the - termios semaphore so allowed to sleep. Serialized - against itself only. - -poll() (optional) Check the status for the poll/select - calls. Multiple poll calls may occur in parallel. - May sleep. - -ioctl() (optional) Called when an ioctl is handed to the - tty layer that might be for the ldisc. Multiple - ioctl calls may occur in parallel. May sleep. - -compat_ioctl() (optional) Called when a 32 bit ioctl is handed - to the tty layer that might be for the ldisc. - Multiple ioctl calls may occur in parallel. - May sleep. -======================= ======================================================= - -Driver Side Interfaces -^^^^^^^^^^^^^^^^^^^^^^ - -======================= ======================================================= -receive_buf() (optional) Called by the low-level driver to hand - a buffer of received bytes to the ldisc for - processing. The number of bytes is guaranteed not - to exceed the current value of tty->receive_room. - All bytes must be processed. - -receive_buf2() (optional) Called by the low-level driver to hand - a buffer of received bytes to the ldisc for - processing. Returns the number of bytes processed. - - If both receive_buf() and receive_buf2() are - defined, receive_buf2() should be preferred. - -write_wakeup() May be called at any point between open and close. - The TTY_DO_WRITE_WAKEUP flag indicates if a call - is needed but always races versus calls. Thus the - ldisc must be careful about setting order and to - handle unexpected calls. Must not sleep. - - The driver is forbidden from calling this directly - from the ->write call from the ldisc as the ldisc - is permitted to call the driver write method from - this function. In such a situation defer it. - -dcd_change() Report to the tty line the current DCD pin status - changes and the relative timestamp. The timestamp - cannot be NULL. -======================= ======================================================= - - -Driver Access -^^^^^^^^^^^^^ - -Line discipline methods can call the following methods of the underlying -hardware driver through the function pointers within the tty->driver -structure: - -======================= ======================================================= -write() Write a block of characters to the tty device. - Returns the number of characters accepted. The - character buffer passed to this method is already - in kernel space. - -put_char() Queues a character for writing to the tty device. - If there is no room in the queue, the character is - ignored. - -flush_chars() (Optional) If defined, must be called after - queueing characters with put_char() in order to - start transmission. - -write_room() Returns the numbers of characters the tty driver - will accept for queueing to be written. - -ioctl() Invoke device specific ioctl. - Expects data pointers to refer to userspace. - Returns ENOIOCTLCMD for unrecognized ioctl numbers. - -set_termios() Notify the tty driver that the device's termios - settings have changed. New settings are in - tty->termios. Previous settings should be passed in - the "old" argument. - - The API is defined such that the driver should return - the actual modes selected. This means that the - driver function is responsible for modifying any - bits in the request it cannot fulfill to indicate - the actual modes being used. A device with no - hardware capability for change (e.g. a USB dongle or - virtual port) can provide NULL for this method. - -throttle() Notify the tty driver that input buffers for the - line discipline are close to full, and it should - somehow signal that no more characters should be - sent to the tty. - -unthrottle() Notify the tty driver that characters can now be - sent to the tty without fear of overrunning the - input buffers of the line disciplines. - -stop() Ask the tty driver to stop outputting characters - to the tty device. - -start() Ask the tty driver to resume sending characters - to the tty device. - -hangup() Ask the tty driver to hang up the tty device. - -break_ctl() (Optional) Ask the tty driver to turn on or off - BREAK status on the RS-232 port. If state is -1, - then the BREAK status should be turned on; if - state is 0, then BREAK should be turned off. - If this routine is not implemented, use ioctls - TIOCSBRK / TIOCCBRK instead. - -wait_until_sent() Waits until the device has written out all of the - characters in its transmitter FIFO. - -send_xchar() Send a high-priority XON/XOFF character to the device. -======================= ======================================================= - - -Flags -^^^^^ - -Line discipline methods have access to tty->flags field containing the -following interesting flags: - -======================= ======================================================= -TTY_THROTTLED Driver input is throttled. The ldisc should call - tty->driver->unthrottle() in order to resume - reception when it is ready to process more data. - -TTY_DO_WRITE_WAKEUP If set, causes the driver to call the ldisc's - write_wakeup() method in order to resume - transmission when it can accept more data - to transmit. - -TTY_IO_ERROR If set, causes all subsequent userspace read/write - calls on the tty to fail, returning -EIO. - -TTY_OTHER_CLOSED Device is a pty and the other side has closed. - -TTY_NO_WRITE_SPLIT Prevent driver from splitting up writes into - smaller chunks. -======================= ======================================================= - - -Locking -^^^^^^^ - -Callers to the line discipline functions from the tty layer are required to -take line discipline locks. The same is true of calls from the driver side -but not yet enforced. - -Three calls are now provided:: - - ldisc = tty_ldisc_ref(tty); - -takes a handle to the line discipline in the tty and returns it. If no ldisc -is currently attached or the ldisc is being closed and re-opened at this -point then NULL is returned. While this handle is held the ldisc will not -change or go away:: - - tty_ldisc_deref(ldisc) - -Returns the ldisc reference and allows the ldisc to be closed. Returning the -reference takes away your right to call the ldisc functions until you take -a new reference:: - - ldisc = tty_ldisc_ref_wait(tty); - -Performs the same function as tty_ldisc_ref except that it will wait for an -ldisc change to complete and then return a reference to the new ldisc. - -While these functions are slightly slower than the old code they should have -minimal impact as most receive logic uses the flip buffers and they only -need to take a reference when they push bits up through the driver. - -A caution: The ldisc->open(), ldisc->close() and driver->set_ldisc -functions are called with the ldisc unavailable. Thus tty_ldisc_ref will -fail in this situation if used within these functions. Ldisc and driver -code calling its own functions must be careful in this case. - - -Driver Interface ----------------- - -======================= ======================================================= -open() Called when a device is opened. May sleep - -close() Called when a device is closed. At the point of - return from this call the driver must make no - further ldisc calls of any kind. May sleep - -write() Called to write bytes to the device. May not - sleep. May occur in parallel in special cases. - Because this includes panic paths drivers generally - shouldn't try and do clever locking here. - -put_char() Stuff a single character onto the queue. The - driver is guaranteed following up calls to - flush_chars. - -flush_chars() Ask the kernel to write put_char queue - -write_room() Return the number of characters that can be stuffed - into the port buffers without overflow (or less). - The ldisc is responsible for being intelligent - about multi-threading of write_room/write calls - -ioctl() Called when an ioctl may be for the driver - -set_termios() Called on termios change, serialized against - itself by a semaphore. May sleep. - -set_ldisc() Notifier for discipline change. At the point this - is done the discipline is not yet usable. Can now - sleep (I think) - -throttle() Called by the ldisc to ask the driver to do flow - control. Serialization including with unthrottle - is the job of the ldisc layer. - -unthrottle() Called by the ldisc to ask the driver to stop flow - control. - -stop() Ldisc notifier to the driver to stop output. As with - throttle the serializations with start() are down - to the ldisc layer. - -start() Ldisc notifier to the driver to start output. - -hangup() Ask the tty driver to cause a hangup initiated - from the host side. [Can sleep ??] - -break_ctl() Send RS232 break. Can sleep. Can get called in - parallel, driver must serialize (for now), and - with write calls. - -wait_until_sent() Wait for characters to exit the hardware queue - of the driver. Can sleep - -send_xchar() Send XON/XOFF and if possible jump the queue with - it in order to get fast flow control responses. - Cannot sleep ?? -======================= ======================================================= diff --git a/MAINTAINERS b/MAINTAINERS index d1a0a817dd92..4f88bca37c55 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -10767,7 +10767,7 @@ F: include/uapi/linux/meye.h MOXA SMARTIO/INDUSTIO/INTELLIO SERIAL CARD M: Jiri Slaby S: Maintained -F: Documentation/serial/moxa-smartio.rst +F: Documentation/driver-api/serial/moxa-smartio.rst F: drivers/tty/mxser.* MR800 AVERMEDIA USB FM RADIO DRIVER @@ -13689,7 +13689,7 @@ ROCKETPORT DRIVER P: Comtrol Corp. W: http://www.comtrol.com S: Maintained -F: Documentation/serial/rocket.rst +F: Documentation/driver-api/serial/rocket.rst F: drivers/tty/rocket* ROCKETPORT EXPRESS/INFINITY DRIVER @@ -16228,7 +16228,7 @@ M: Greg Kroah-Hartman M: Jiri Slaby S: Supported T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git -F: Documentation/serial/ +F: Documentation/driver-api/serial/ F: drivers/tty/ F: drivers/tty/serial/serial_core.c F: include/linux/serial_core.h diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig index ee51b9514225..c7623f99ac0f 100644 --- a/drivers/tty/Kconfig +++ b/drivers/tty/Kconfig @@ -175,7 +175,7 @@ config ROCKETPORT This driver supports Comtrol RocketPort and RocketModem PCI boards. These boards provide 2, 4, 8, 16, or 32 high-speed serial ports or modems. For information about the RocketPort/RocketModem boards - and this driver read . + and this driver read . To compile this driver as a module, choose M here: the module will be called rocket. @@ -193,7 +193,7 @@ config CYCLADES your Linux box, for instance in order to become a dial-in server. For information about the Cyclades-Z card, read - . + . To compile this driver as a module, choose M here: the module will be called cyclades. diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c index 6e3c66ab0e62..a0555ae2b1ef 100644 --- a/drivers/tty/serial/ucc_uart.c +++ b/drivers/tty/serial/ucc_uart.c @@ -1081,7 +1081,7 @@ static int qe_uart_verify_port(struct uart_port *port, } /* UART operations * - * Details on these functions can be found in Documentation/serial/driver.rst + * Details on these functions can be found in Documentation/driver-api/serial/driver.rst */ static const struct uart_ops qe_uart_pops = { .tx_empty = qe_uart_tx_empty, diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 05b179015d6c..2b78cc734719 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -32,7 +32,7 @@ struct device; /* * This structure describes all the operations that can be done on the - * physical hardware. See Documentation/serial/driver.rst for details. + * physical hardware. See Documentation/driver-api/serial/driver.rst for details. */ struct uart_ops { unsigned int (*tx_empty)(struct uart_port *); -- cgit v1.2.3