From 713b93f1b849527e8c440753fc92cc6c202f2092 Mon Sep 17 00:00:00 2001 From: Aleksey Makarov Date: Wed, 1 Mar 2017 18:23:02 +0300 Subject: Revert "tty: serial: pl011: add ttyAMA for matching pl011 console" The original patch makes the condition always true, so it is wrong. It masks (but not fixes) the bug described in the commit message but introduces a regression (no console is selected by SPCR) in regular (no 'console=ttyAMA') case. s/||/&&/ would not fix the problem as the root cause was identified incorrectly. This reverts commit aea9a80ba98a0c9b4de88850260e9fbdcc98360b. Signed-off-by: Aleksey Makarov Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/amba-pl011.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 8789ea423ccf..56f92d7348bf 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -2373,7 +2373,7 @@ static int __init pl011_console_match(struct console *co, char *name, int idx, if (strcmp(name, "qdf2400_e44") == 0) { pr_info_once("UART: Working around QDF2400 SoC erratum 44"); qdf2400_e44_present = true; - } else if (strcmp(name, "pl011") != 0 || strcmp(name, "ttyAMA") != 0) { + } else if (strcmp(name, "pl011") != 0) { return -ENODEV; } -- cgit v1.2.3 From 3c9101766b502a0163d1d437fada5801cf616be2 Mon Sep 17 00:00:00 2001 From: Takatoshi Akiyama Date: Mon, 27 Feb 2017 15:56:31 +0900 Subject: serial: sh-sci: Fix panic when serial console and DMA are enabled This patch fixes an issue that kernel panic happens when DMA is enabled and we press enter key while the kernel booting on the serial console. * An interrupt may occur after sci_request_irq(). * DMA transfer area is initialized by setup_timer() in sci_request_dma() and used in interrupt. If an interrupt occurred between sci_request_irq() and setup_timer() in sci_request_dma(), DMA transfer area has not been initialized yet. So, this patch changes the order of sci_request_irq() and sci_request_dma(). Fixes: 73a19e4c0301 ("serial: sh-sci: Add DMA support.") Signed-off-by: Takatoshi Akiyama [Shimoda changes the commit log] Signed-off-by: Yoshihiro Shimoda Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/sh-sci.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 9a47cc4f16a2..1df57461ece4 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -1985,11 +1985,13 @@ static int sci_startup(struct uart_port *port) dev_dbg(port->dev, "%s(%d)\n", __func__, port->line); + sci_request_dma(port); + ret = sci_request_irq(s); - if (unlikely(ret < 0)) + if (unlikely(ret < 0)) { + sci_free_dma(port); return ret; - - sci_request_dma(port); + } return 0; } @@ -2021,8 +2023,8 @@ static void sci_shutdown(struct uart_port *port) } #endif - sci_free_dma(port); sci_free_irq(s); + sci_free_dma(port); } static int sci_sck_calc(struct sci_port *s, unsigned int bps, -- cgit v1.2.3 From 432f974801e2f3590c95a666ab4546346d1c60a9 Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Tue, 21 Feb 2017 13:03:56 +0100 Subject: tty/serial: atmel: increase ATMEL_MAX_UART MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The samx7 family uses the same UART/USART IP as the at91/sama5 families but has 8 of those. Suggested-by: Szemző András Signed-off-by: Alexandre Belloni Acked-by: Richard Genoud Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/atmel_serial.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index dcebb28ffbc4..87a921217f8b 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -119,8 +119,9 @@ struct atmel_uart_char { /* * at91: 6 USARTs and one DBGU port (SAM9260) * avr32: 4 + * samx7: 3 USARTs and 5 UARTs */ -#define ATMEL_MAX_UART 7 +#define ATMEL_MAX_UART 8 /* * We wrap our port structure around the generic uart_port. -- cgit v1.2.3 From 488ae82d973c421229c9f02363e94545086313da Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Tue, 21 Feb 2017 13:03:57 +0100 Subject: tty/serial: atmel: remove cache when unnecessary struct cache is only used in suspend/resume. Exclude it when PM is not selected. Suggested-by: Richard Genoud Signed-off-by: Alexandre Belloni Acked-by: Richard Genoud Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/atmel_serial.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 87a921217f8b..8cc152e67bfb 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -176,6 +176,7 @@ struct atmel_uart_port { unsigned int pending_status; spinlock_t lock_suspended; +#ifdef CONFIG_PM struct { u32 cr; u32 mr; @@ -186,6 +187,7 @@ struct atmel_uart_port { u32 fmr; u32 fimr; } cache; +#endif int (*prepare_rx)(struct uart_port *port); int (*prepare_tx)(struct uart_port *port); -- cgit v1.2.3 From 2b57b7ff9d0322e188a83fd80837afe6af1efa02 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Tue, 28 Feb 2017 16:54:41 +0200 Subject: serial: 8250_exar: Fix spelling of "driver" Fix typo in "Dricer". Signed-off-by: Andy Shevchenko Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_exar.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c index b89c4ffc0486..1270ff163f63 100644 --- a/drivers/tty/serial/8250/8250_exar.c +++ b/drivers/tty/serial/8250/8250_exar.c @@ -483,5 +483,5 @@ static struct pci_driver exar_pci_driver = { module_pci_driver(exar_pci_driver); MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("Exar Serial Dricer"); +MODULE_DESCRIPTION("Exar Serial Driver"); MODULE_AUTHOR("Sudip Mukherjee "); -- cgit v1.2.3 From 8961df8950b1235cb7594e143a31bcc63757b660 Mon Sep 17 00:00:00 2001 From: Richard Genoud Date: Fri, 3 Mar 2017 15:13:44 +0100 Subject: tty/serial: atmel: move atmel_serial header into driver directory atmel_serial.h is only used by atmel_serial.c, so there's no need for it to lie in include/linux. Suggested-by: Joe Perches Signed-off-by: Richard Genoud Signed-off-by: Greg Kroah-Hartman --- MAINTAINERS | 2 +- drivers/tty/serial/atmel_serial.c | 2 +- drivers/tty/serial/atmel_serial.h | 169 ++++++++++++++++++++++++++++++++++++++ include/linux/atmel_serial.h | 169 -------------------------------------- 4 files changed, 171 insertions(+), 171 deletions(-) create mode 100644 drivers/tty/serial/atmel_serial.h delete mode 100644 include/linux/atmel_serial.h diff --git a/MAINTAINERS b/MAINTAINERS index c776906f67a9..010ab746ea4b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8283,7 +8283,7 @@ MICROCHIP / ATMEL AT91 / AT32 SERIAL DRIVER M: Richard Genoud S: Maintained F: drivers/tty/serial/atmel_serial.c -F: include/linux/atmel_serial.h +F: drivers/tty/serial/atmel_serial.h MICROCHIP / ATMEL DMA DRIVER M: Ludovic Desroches diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 8cc152e67bfb..d9c05e05d896 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -38,7 +38,6 @@ #include #include #include -#include #include #include #include @@ -71,6 +70,7 @@ #include #include "serial_mctrl_gpio.h" +#include "atmel_serial.h" static void atmel_start_rx(struct uart_port *port); static void atmel_stop_rx(struct uart_port *port); diff --git a/drivers/tty/serial/atmel_serial.h b/drivers/tty/serial/atmel_serial.h new file mode 100644 index 000000000000..bd2560502f3c --- /dev/null +++ b/drivers/tty/serial/atmel_serial.h @@ -0,0 +1,169 @@ +/* + * include/linux/atmel_serial.h + * + * Copyright (C) 2005 Ivan Kokshaysky + * Copyright (C) SAN People + * + * USART registers. + * Based on AT91RM9200 datasheet revision E. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef ATMEL_SERIAL_H +#define ATMEL_SERIAL_H + +#define ATMEL_US_CR 0x00 /* Control Register */ +#define ATMEL_US_RSTRX BIT(2) /* Reset Receiver */ +#define ATMEL_US_RSTTX BIT(3) /* Reset Transmitter */ +#define ATMEL_US_RXEN BIT(4) /* Receiver Enable */ +#define ATMEL_US_RXDIS BIT(5) /* Receiver Disable */ +#define ATMEL_US_TXEN BIT(6) /* Transmitter Enable */ +#define ATMEL_US_TXDIS BIT(7) /* Transmitter Disable */ +#define ATMEL_US_RSTSTA BIT(8) /* Reset Status Bits */ +#define ATMEL_US_STTBRK BIT(9) /* Start Break */ +#define ATMEL_US_STPBRK BIT(10) /* Stop Break */ +#define ATMEL_US_STTTO BIT(11) /* Start Time-out */ +#define ATMEL_US_SENDA BIT(12) /* Send Address */ +#define ATMEL_US_RSTIT BIT(13) /* Reset Iterations */ +#define ATMEL_US_RSTNACK BIT(14) /* Reset Non Acknowledge */ +#define ATMEL_US_RETTO BIT(15) /* Rearm Time-out */ +#define ATMEL_US_DTREN BIT(16) /* Data Terminal Ready Enable */ +#define ATMEL_US_DTRDIS BIT(17) /* Data Terminal Ready Disable */ +#define ATMEL_US_RTSEN BIT(18) /* Request To Send Enable */ +#define ATMEL_US_RTSDIS BIT(19) /* Request To Send Disable */ +#define ATMEL_US_TXFCLR BIT(24) /* Transmit FIFO Clear */ +#define ATMEL_US_RXFCLR BIT(25) /* Receive FIFO Clear */ +#define ATMEL_US_TXFLCLR BIT(26) /* Transmit FIFO Lock Clear */ +#define ATMEL_US_FIFOEN BIT(30) /* FIFO enable */ +#define ATMEL_US_FIFODIS BIT(31) /* FIFO disable */ + +#define ATMEL_US_MR 0x04 /* Mode Register */ +#define ATMEL_US_USMODE GENMASK(3, 0) /* Mode of the USART */ +#define ATMEL_US_USMODE_NORMAL 0 +#define ATMEL_US_USMODE_RS485 1 +#define ATMEL_US_USMODE_HWHS 2 +#define ATMEL_US_USMODE_MODEM 3 +#define ATMEL_US_USMODE_ISO7816_T0 4 +#define ATMEL_US_USMODE_ISO7816_T1 6 +#define ATMEL_US_USMODE_IRDA 8 +#define ATMEL_US_USCLKS GENMASK(5, 4) /* Clock Selection */ +#define ATMEL_US_USCLKS_MCK (0 << 4) +#define ATMEL_US_USCLKS_MCK_DIV8 (1 << 4) +#define ATMEL_US_USCLKS_SCK (3 << 4) +#define ATMEL_US_CHRL GENMASK(7, 6) /* Character Length */ +#define ATMEL_US_CHRL_5 (0 << 6) +#define ATMEL_US_CHRL_6 (1 << 6) +#define ATMEL_US_CHRL_7 (2 << 6) +#define ATMEL_US_CHRL_8 (3 << 6) +#define ATMEL_US_SYNC BIT(8) /* Synchronous Mode Select */ +#define ATMEL_US_PAR GENMASK(11, 9) /* Parity Type */ +#define ATMEL_US_PAR_EVEN (0 << 9) +#define ATMEL_US_PAR_ODD (1 << 9) +#define ATMEL_US_PAR_SPACE (2 << 9) +#define ATMEL_US_PAR_MARK (3 << 9) +#define ATMEL_US_PAR_NONE (4 << 9) +#define ATMEL_US_PAR_MULTI_DROP (6 << 9) +#define ATMEL_US_NBSTOP GENMASK(13, 12) /* Number of Stop Bits */ +#define ATMEL_US_NBSTOP_1 (0 << 12) +#define ATMEL_US_NBSTOP_1_5 (1 << 12) +#define ATMEL_US_NBSTOP_2 (2 << 12) +#define ATMEL_US_CHMODE GENMASK(15, 14) /* Channel Mode */ +#define ATMEL_US_CHMODE_NORMAL (0 << 14) +#define ATMEL_US_CHMODE_ECHO (1 << 14) +#define ATMEL_US_CHMODE_LOC_LOOP (2 << 14) +#define ATMEL_US_CHMODE_REM_LOOP (3 << 14) +#define ATMEL_US_MSBF BIT(16) /* Bit Order */ +#define ATMEL_US_MODE9 BIT(17) /* 9-bit Character Length */ +#define ATMEL_US_CLKO BIT(18) /* Clock Output Select */ +#define ATMEL_US_OVER BIT(19) /* Oversampling Mode */ +#define ATMEL_US_INACK BIT(20) /* Inhibit Non Acknowledge */ +#define ATMEL_US_DSNACK BIT(21) /* Disable Successive NACK */ +#define ATMEL_US_MAX_ITER GENMASK(26, 24) /* Max Iterations */ +#define ATMEL_US_FILTER BIT(28) /* Infrared Receive Line Filter */ + +#define ATMEL_US_IER 0x08 /* Interrupt Enable Register */ +#define ATMEL_US_RXRDY BIT(0) /* Receiver Ready */ +#define ATMEL_US_TXRDY BIT(1) /* Transmitter Ready */ +#define ATMEL_US_RXBRK BIT(2) /* Break Received / End of Break */ +#define ATMEL_US_ENDRX BIT(3) /* End of Receiver Transfer */ +#define ATMEL_US_ENDTX BIT(4) /* End of Transmitter Transfer */ +#define ATMEL_US_OVRE BIT(5) /* Overrun Error */ +#define ATMEL_US_FRAME BIT(6) /* Framing Error */ +#define ATMEL_US_PARE BIT(7) /* Parity Error */ +#define ATMEL_US_TIMEOUT BIT(8) /* Receiver Time-out */ +#define ATMEL_US_TXEMPTY BIT(9) /* Transmitter Empty */ +#define ATMEL_US_ITERATION BIT(10) /* Max number of Repetitions Reached */ +#define ATMEL_US_TXBUFE BIT(11) /* Transmission Buffer Empty */ +#define ATMEL_US_RXBUFF BIT(12) /* Reception Buffer Full */ +#define ATMEL_US_NACK BIT(13) /* Non Acknowledge */ +#define ATMEL_US_RIIC BIT(16) /* Ring Indicator Input Change */ +#define ATMEL_US_DSRIC BIT(17) /* Data Set Ready Input Change */ +#define ATMEL_US_DCDIC BIT(18) /* Data Carrier Detect Input Change */ +#define ATMEL_US_CTSIC BIT(19) /* Clear to Send Input Change */ +#define ATMEL_US_RI BIT(20) /* RI */ +#define ATMEL_US_DSR BIT(21) /* DSR */ +#define ATMEL_US_DCD BIT(22) /* DCD */ +#define ATMEL_US_CTS BIT(23) /* CTS */ + +#define ATMEL_US_IDR 0x0c /* Interrupt Disable Register */ +#define ATMEL_US_IMR 0x10 /* Interrupt Mask Register */ +#define ATMEL_US_CSR 0x14 /* Channel Status Register */ +#define ATMEL_US_RHR 0x18 /* Receiver Holding Register */ +#define ATMEL_US_THR 0x1c /* Transmitter Holding Register */ +#define ATMEL_US_SYNH BIT(15) /* Transmit/Receive Sync */ + +#define ATMEL_US_BRGR 0x20 /* Baud Rate Generator Register */ +#define ATMEL_US_CD GENMASK(15, 0) /* Clock Divider */ +#define ATMEL_US_FP_OFFSET 16 /* Fractional Part */ +#define ATMEL_US_FP_MASK 0x7 + +#define ATMEL_US_RTOR 0x24 /* Receiver Time-out Register for USART */ +#define ATMEL_UA_RTOR 0x28 /* Receiver Time-out Register for UART */ +#define ATMEL_US_TO GENMASK(15, 0) /* Time-out Value */ + +#define ATMEL_US_TTGR 0x28 /* Transmitter Timeguard Register */ +#define ATMEL_US_TG GENMASK(7, 0) /* Timeguard Value */ + +#define ATMEL_US_FIDI 0x40 /* FI DI Ratio Register */ +#define ATMEL_US_NER 0x44 /* Number of Errors Register */ +#define ATMEL_US_IF 0x4c /* IrDA Filter Register */ + +#define ATMEL_US_CMPR 0x90 /* Comparaison Register */ +#define ATMEL_US_FMR 0xa0 /* FIFO Mode Register */ +#define ATMEL_US_TXRDYM(data) (((data) & 0x3) << 0) /* TX Ready Mode */ +#define ATMEL_US_RXRDYM(data) (((data) & 0x3) << 4) /* RX Ready Mode */ +#define ATMEL_US_ONE_DATA 0x0 +#define ATMEL_US_TWO_DATA 0x1 +#define ATMEL_US_FOUR_DATA 0x2 +#define ATMEL_US_FRTSC BIT(7) /* FIFO RTS pin Control */ +#define ATMEL_US_TXFTHRES(thr) (((thr) & 0x3f) << 8) /* TX FIFO Threshold */ +#define ATMEL_US_RXFTHRES(thr) (((thr) & 0x3f) << 16) /* RX FIFO Threshold */ +#define ATMEL_US_RXFTHRES2(thr) (((thr) & 0x3f) << 24) /* RX FIFO Threshold2 */ + +#define ATMEL_US_FLR 0xa4 /* FIFO Level Register */ +#define ATMEL_US_TXFL(reg) (((reg) >> 0) & 0x3f) /* TX FIFO Level */ +#define ATMEL_US_RXFL(reg) (((reg) >> 16) & 0x3f) /* RX FIFO Level */ + +#define ATMEL_US_FIER 0xa8 /* FIFO Interrupt Enable Register */ +#define ATMEL_US_FIDR 0xac /* FIFO Interrupt Disable Register */ +#define ATMEL_US_FIMR 0xb0 /* FIFO Interrupt Mask Register */ +#define ATMEL_US_FESR 0xb4 /* FIFO Event Status Register */ +#define ATMEL_US_TXFEF BIT(0) /* Transmit FIFO Empty Flag */ +#define ATMEL_US_TXFFF BIT(1) /* Transmit FIFO Full Flag */ +#define ATMEL_US_TXFTHF BIT(2) /* Transmit FIFO Threshold Flag */ +#define ATMEL_US_RXFEF BIT(3) /* Receive FIFO Empty Flag */ +#define ATMEL_US_RXFFF BIT(4) /* Receive FIFO Full Flag */ +#define ATMEL_US_RXFTHF BIT(5) /* Receive FIFO Threshold Flag */ +#define ATMEL_US_TXFPTEF BIT(6) /* Transmit FIFO Pointer Error Flag */ +#define ATMEL_US_RXFPTEF BIT(7) /* Receive FIFO Pointer Error Flag */ +#define ATMEL_US_TXFLOCK BIT(8) /* Transmit FIFO Lock (FESR only) */ +#define ATMEL_US_RXFTHF2 BIT(9) /* Receive FIFO Threshold Flag 2 */ + +#define ATMEL_US_NAME 0xf0 /* Ip Name */ +#define ATMEL_US_VERSION 0xfc /* Ip Version */ + +#endif diff --git a/include/linux/atmel_serial.h b/include/linux/atmel_serial.h deleted file mode 100644 index bd2560502f3c..000000000000 --- a/include/linux/atmel_serial.h +++ /dev/null @@ -1,169 +0,0 @@ -/* - * include/linux/atmel_serial.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * USART registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef ATMEL_SERIAL_H -#define ATMEL_SERIAL_H - -#define ATMEL_US_CR 0x00 /* Control Register */ -#define ATMEL_US_RSTRX BIT(2) /* Reset Receiver */ -#define ATMEL_US_RSTTX BIT(3) /* Reset Transmitter */ -#define ATMEL_US_RXEN BIT(4) /* Receiver Enable */ -#define ATMEL_US_RXDIS BIT(5) /* Receiver Disable */ -#define ATMEL_US_TXEN BIT(6) /* Transmitter Enable */ -#define ATMEL_US_TXDIS BIT(7) /* Transmitter Disable */ -#define ATMEL_US_RSTSTA BIT(8) /* Reset Status Bits */ -#define ATMEL_US_STTBRK BIT(9) /* Start Break */ -#define ATMEL_US_STPBRK BIT(10) /* Stop Break */ -#define ATMEL_US_STTTO BIT(11) /* Start Time-out */ -#define ATMEL_US_SENDA BIT(12) /* Send Address */ -#define ATMEL_US_RSTIT BIT(13) /* Reset Iterations */ -#define ATMEL_US_RSTNACK BIT(14) /* Reset Non Acknowledge */ -#define ATMEL_US_RETTO BIT(15) /* Rearm Time-out */ -#define ATMEL_US_DTREN BIT(16) /* Data Terminal Ready Enable */ -#define ATMEL_US_DTRDIS BIT(17) /* Data Terminal Ready Disable */ -#define ATMEL_US_RTSEN BIT(18) /* Request To Send Enable */ -#define ATMEL_US_RTSDIS BIT(19) /* Request To Send Disable */ -#define ATMEL_US_TXFCLR BIT(24) /* Transmit FIFO Clear */ -#define ATMEL_US_RXFCLR BIT(25) /* Receive FIFO Clear */ -#define ATMEL_US_TXFLCLR BIT(26) /* Transmit FIFO Lock Clear */ -#define ATMEL_US_FIFOEN BIT(30) /* FIFO enable */ -#define ATMEL_US_FIFODIS BIT(31) /* FIFO disable */ - -#define ATMEL_US_MR 0x04 /* Mode Register */ -#define ATMEL_US_USMODE GENMASK(3, 0) /* Mode of the USART */ -#define ATMEL_US_USMODE_NORMAL 0 -#define ATMEL_US_USMODE_RS485 1 -#define ATMEL_US_USMODE_HWHS 2 -#define ATMEL_US_USMODE_MODEM 3 -#define ATMEL_US_USMODE_ISO7816_T0 4 -#define ATMEL_US_USMODE_ISO7816_T1 6 -#define ATMEL_US_USMODE_IRDA 8 -#define ATMEL_US_USCLKS GENMASK(5, 4) /* Clock Selection */ -#define ATMEL_US_USCLKS_MCK (0 << 4) -#define ATMEL_US_USCLKS_MCK_DIV8 (1 << 4) -#define ATMEL_US_USCLKS_SCK (3 << 4) -#define ATMEL_US_CHRL GENMASK(7, 6) /* Character Length */ -#define ATMEL_US_CHRL_5 (0 << 6) -#define ATMEL_US_CHRL_6 (1 << 6) -#define ATMEL_US_CHRL_7 (2 << 6) -#define ATMEL_US_CHRL_8 (3 << 6) -#define ATMEL_US_SYNC BIT(8) /* Synchronous Mode Select */ -#define ATMEL_US_PAR GENMASK(11, 9) /* Parity Type */ -#define ATMEL_US_PAR_EVEN (0 << 9) -#define ATMEL_US_PAR_ODD (1 << 9) -#define ATMEL_US_PAR_SPACE (2 << 9) -#define ATMEL_US_PAR_MARK (3 << 9) -#define ATMEL_US_PAR_NONE (4 << 9) -#define ATMEL_US_PAR_MULTI_DROP (6 << 9) -#define ATMEL_US_NBSTOP GENMASK(13, 12) /* Number of Stop Bits */ -#define ATMEL_US_NBSTOP_1 (0 << 12) -#define ATMEL_US_NBSTOP_1_5 (1 << 12) -#define ATMEL_US_NBSTOP_2 (2 << 12) -#define ATMEL_US_CHMODE GENMASK(15, 14) /* Channel Mode */ -#define ATMEL_US_CHMODE_NORMAL (0 << 14) -#define ATMEL_US_CHMODE_ECHO (1 << 14) -#define ATMEL_US_CHMODE_LOC_LOOP (2 << 14) -#define ATMEL_US_CHMODE_REM_LOOP (3 << 14) -#define ATMEL_US_MSBF BIT(16) /* Bit Order */ -#define ATMEL_US_MODE9 BIT(17) /* 9-bit Character Length */ -#define ATMEL_US_CLKO BIT(18) /* Clock Output Select */ -#define ATMEL_US_OVER BIT(19) /* Oversampling Mode */ -#define ATMEL_US_INACK BIT(20) /* Inhibit Non Acknowledge */ -#define ATMEL_US_DSNACK BIT(21) /* Disable Successive NACK */ -#define ATMEL_US_MAX_ITER GENMASK(26, 24) /* Max Iterations */ -#define ATMEL_US_FILTER BIT(28) /* Infrared Receive Line Filter */ - -#define ATMEL_US_IER 0x08 /* Interrupt Enable Register */ -#define ATMEL_US_RXRDY BIT(0) /* Receiver Ready */ -#define ATMEL_US_TXRDY BIT(1) /* Transmitter Ready */ -#define ATMEL_US_RXBRK BIT(2) /* Break Received / End of Break */ -#define ATMEL_US_ENDRX BIT(3) /* End of Receiver Transfer */ -#define ATMEL_US_ENDTX BIT(4) /* End of Transmitter Transfer */ -#define ATMEL_US_OVRE BIT(5) /* Overrun Error */ -#define ATMEL_US_FRAME BIT(6) /* Framing Error */ -#define ATMEL_US_PARE BIT(7) /* Parity Error */ -#define ATMEL_US_TIMEOUT BIT(8) /* Receiver Time-out */ -#define ATMEL_US_TXEMPTY BIT(9) /* Transmitter Empty */ -#define ATMEL_US_ITERATION BIT(10) /* Max number of Repetitions Reached */ -#define ATMEL_US_TXBUFE BIT(11) /* Transmission Buffer Empty */ -#define ATMEL_US_RXBUFF BIT(12) /* Reception Buffer Full */ -#define ATMEL_US_NACK BIT(13) /* Non Acknowledge */ -#define ATMEL_US_RIIC BIT(16) /* Ring Indicator Input Change */ -#define ATMEL_US_DSRIC BIT(17) /* Data Set Ready Input Change */ -#define ATMEL_US_DCDIC BIT(18) /* Data Carrier Detect Input Change */ -#define ATMEL_US_CTSIC BIT(19) /* Clear to Send Input Change */ -#define ATMEL_US_RI BIT(20) /* RI */ -#define ATMEL_US_DSR BIT(21) /* DSR */ -#define ATMEL_US_DCD BIT(22) /* DCD */ -#define ATMEL_US_CTS BIT(23) /* CTS */ - -#define ATMEL_US_IDR 0x0c /* Interrupt Disable Register */ -#define ATMEL_US_IMR 0x10 /* Interrupt Mask Register */ -#define ATMEL_US_CSR 0x14 /* Channel Status Register */ -#define ATMEL_US_RHR 0x18 /* Receiver Holding Register */ -#define ATMEL_US_THR 0x1c /* Transmitter Holding Register */ -#define ATMEL_US_SYNH BIT(15) /* Transmit/Receive Sync */ - -#define ATMEL_US_BRGR 0x20 /* Baud Rate Generator Register */ -#define ATMEL_US_CD GENMASK(15, 0) /* Clock Divider */ -#define ATMEL_US_FP_OFFSET 16 /* Fractional Part */ -#define ATMEL_US_FP_MASK 0x7 - -#define ATMEL_US_RTOR 0x24 /* Receiver Time-out Register for USART */ -#define ATMEL_UA_RTOR 0x28 /* Receiver Time-out Register for UART */ -#define ATMEL_US_TO GENMASK(15, 0) /* Time-out Value */ - -#define ATMEL_US_TTGR 0x28 /* Transmitter Timeguard Register */ -#define ATMEL_US_TG GENMASK(7, 0) /* Timeguard Value */ - -#define ATMEL_US_FIDI 0x40 /* FI DI Ratio Register */ -#define ATMEL_US_NER 0x44 /* Number of Errors Register */ -#define ATMEL_US_IF 0x4c /* IrDA Filter Register */ - -#define ATMEL_US_CMPR 0x90 /* Comparaison Register */ -#define ATMEL_US_FMR 0xa0 /* FIFO Mode Register */ -#define ATMEL_US_TXRDYM(data) (((data) & 0x3) << 0) /* TX Ready Mode */ -#define ATMEL_US_RXRDYM(data) (((data) & 0x3) << 4) /* RX Ready Mode */ -#define ATMEL_US_ONE_DATA 0x0 -#define ATMEL_US_TWO_DATA 0x1 -#define ATMEL_US_FOUR_DATA 0x2 -#define ATMEL_US_FRTSC BIT(7) /* FIFO RTS pin Control */ -#define ATMEL_US_TXFTHRES(thr) (((thr) & 0x3f) << 8) /* TX FIFO Threshold */ -#define ATMEL_US_RXFTHRES(thr) (((thr) & 0x3f) << 16) /* RX FIFO Threshold */ -#define ATMEL_US_RXFTHRES2(thr) (((thr) & 0x3f) << 24) /* RX FIFO Threshold2 */ - -#define ATMEL_US_FLR 0xa4 /* FIFO Level Register */ -#define ATMEL_US_TXFL(reg) (((reg) >> 0) & 0x3f) /* TX FIFO Level */ -#define ATMEL_US_RXFL(reg) (((reg) >> 16) & 0x3f) /* RX FIFO Level */ - -#define ATMEL_US_FIER 0xa8 /* FIFO Interrupt Enable Register */ -#define ATMEL_US_FIDR 0xac /* FIFO Interrupt Disable Register */ -#define ATMEL_US_FIMR 0xb0 /* FIFO Interrupt Mask Register */ -#define ATMEL_US_FESR 0xb4 /* FIFO Event Status Register */ -#define ATMEL_US_TXFEF BIT(0) /* Transmit FIFO Empty Flag */ -#define ATMEL_US_TXFFF BIT(1) /* Transmit FIFO Full Flag */ -#define ATMEL_US_TXFTHF BIT(2) /* Transmit FIFO Threshold Flag */ -#define ATMEL_US_RXFEF BIT(3) /* Receive FIFO Empty Flag */ -#define ATMEL_US_RXFFF BIT(4) /* Receive FIFO Full Flag */ -#define ATMEL_US_RXFTHF BIT(5) /* Receive FIFO Threshold Flag */ -#define ATMEL_US_TXFPTEF BIT(6) /* Transmit FIFO Pointer Error Flag */ -#define ATMEL_US_RXFPTEF BIT(7) /* Receive FIFO Pointer Error Flag */ -#define ATMEL_US_TXFLOCK BIT(8) /* Transmit FIFO Lock (FESR only) */ -#define ATMEL_US_RXFTHF2 BIT(9) /* Receive FIFO Threshold Flag 2 */ - -#define ATMEL_US_NAME 0xf0 /* Ip Name */ -#define ATMEL_US_VERSION 0xfc /* Ip Version */ - -#endif -- cgit v1.2.3 From 22a33651a56fa2a66339db059dcc247aa7131ced Mon Sep 17 00:00:00 2001 From: Elena Reshetova Date: Mon, 6 Mar 2017 16:21:15 +0200 Subject: drivers: convert sbd_duart.map_guard from atomic_t to refcount_t refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova Signed-off-by: Hans Liljestrand Signed-off-by: Kees Cook Signed-off-by: David Windsor Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/sb1250-duart.c | 18 +++++++----------- 1 file changed, 7 insertions(+), 11 deletions(-) diff --git a/drivers/tty/serial/sb1250-duart.c b/drivers/tty/serial/sb1250-duart.c index 771f361c47ea..041625cc24bb 100644 --- a/drivers/tty/serial/sb1250-duart.c +++ b/drivers/tty/serial/sb1250-duart.c @@ -41,7 +41,7 @@ #include #include -#include +#include #include #include @@ -103,7 +103,7 @@ struct sbd_port { struct sbd_duart { struct sbd_port sport[2]; unsigned long mapctrl; - atomic_t map_guard; + refcount_t map_guard; }; #define to_sport(uport) container_of(uport, struct sbd_port, port) @@ -654,15 +654,13 @@ static void sbd_release_port(struct uart_port *uport) { struct sbd_port *sport = to_sport(uport); struct sbd_duart *duart = sport->duart; - int map_guard; iounmap(sport->memctrl); sport->memctrl = NULL; iounmap(uport->membase); uport->membase = NULL; - map_guard = atomic_add_return(-1, &duart->map_guard); - if (!map_guard) + if(refcount_dec_and_test(&duart->map_guard)) release_mem_region(duart->mapctrl, DUART_CHANREG_SPACING); release_mem_region(uport->mapbase, DUART_CHANREG_SPACING); } @@ -698,7 +696,6 @@ static int sbd_request_port(struct uart_port *uport) { const char *err = KERN_ERR "sbd: Unable to reserve MMIO resource\n"; struct sbd_duart *duart = to_sport(uport)->duart; - int map_guard; int ret = 0; if (!request_mem_region(uport->mapbase, DUART_CHANREG_SPACING, @@ -706,11 +703,11 @@ static int sbd_request_port(struct uart_port *uport) printk(err); return -EBUSY; } - map_guard = atomic_add_return(1, &duart->map_guard); - if (map_guard == 1) { + refcount_inc(&duart->map_guard); + if (refcount_read(&duart->map_guard) == 1) { if (!request_mem_region(duart->mapctrl, DUART_CHANREG_SPACING, "sb1250-duart")) { - atomic_add(-1, &duart->map_guard); + refcount_dec(&duart->map_guard); printk(err); ret = -EBUSY; } @@ -718,8 +715,7 @@ static int sbd_request_port(struct uart_port *uport) if (!ret) { ret = sbd_map_port(uport); if (ret) { - map_guard = atomic_add_return(-1, &duart->map_guard); - if (!map_guard) + if (refcount_dec_and_test(&duart->map_guard)) release_mem_region(duart->mapctrl, DUART_CHANREG_SPACING); } -- cgit v1.2.3 From f48180a70e2f2676f87ba70c08f779ea9e699cc6 Mon Sep 17 00:00:00 2001 From: Vignesh R Date: Wed, 8 Mar 2017 17:49:43 +0530 Subject: serial: 8250: 8250_core: Use dev_name() during request_irq() Passing "serial" as name during request_irq() results in all serial port irqs have same name. This does not help much to easily identify which irq belongs to which serial port instance. Therefore pass dev_name() during request_irq() so that better identifiable name is listed for serial ports in cat /proc/interrupts output. Output of cat /proc/interrupts Before this patch: 26: 689 0 GICv2 309 Edge serial After this patch: 26: 696 0 GICv2 309 Edge 2530c00.serial Signed-off-by: Vignesh R Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index 76e03a7de9cc..f83b69f30987 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -218,7 +218,7 @@ static int serial_link_irq_chain(struct uart_8250_port *up) spin_unlock_irq(&i->lock); irq_flags |= up->port.irqflags; ret = request_irq(up->port.irq, serial8250_interrupt, - irq_flags, "serial", i); + irq_flags, dev_name(up->port.dev), i); if (ret < 0) serial_do_unlink(i, up); } -- cgit v1.2.3 From d62100f1aac28d18057c05410f706c65baf748fa Mon Sep 17 00:00:00 2001 From: Shubhrajyoti Datta Date: Thu, 9 Mar 2017 11:19:07 +0530 Subject: serial: xilinx_uartps: Add pm runtime support Adds pm runtime support to xilinx uart ps. Signed-off-by: Shubhrajyoti Datta Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/xilinx_uartps.c | 50 ++++++++++++++++++++++++++++++++------ 1 file changed, 42 insertions(+), 8 deletions(-) diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c index ad77d0ed0c46..7afa50b07875 100644 --- a/drivers/tty/serial/xilinx_uartps.c +++ b/drivers/tty/serial/xilinx_uartps.c @@ -30,6 +30,7 @@ #include #include #include +#include #define CDNS_UART_TTY_NAME "ttyPS" #define CDNS_UART_NAME "xuartps" @@ -176,6 +177,7 @@ MODULE_PARM_DESC(rx_timeout, "Rx timeout, 1-255"); #define CDNS_UART_BDIV_MIN 4 #define CDNS_UART_BDIV_MAX 255 #define CDNS_UART_CD_MAX 65535 +#define UART_AUTOSUSPEND_TIMEOUT 3000 /** * struct cdns_uart - device data @@ -1065,16 +1067,13 @@ static void cdns_uart_poll_put_char(struct uart_port *port, unsigned char c) static void cdns_uart_pm(struct uart_port *port, unsigned int state, unsigned int oldstate) { - struct cdns_uart *cdns_uart = port->private_data; - switch (state) { case UART_PM_STATE_OFF: - clk_disable(cdns_uart->uartclk); - clk_disable(cdns_uart->pclk); + pm_runtime_mark_last_busy(port->dev); + pm_runtime_put_autosuspend(port->dev); break; default: - clk_enable(cdns_uart->pclk); - clk_enable(cdns_uart->uartclk); + pm_runtime_get_sync(port->dev); break; } } @@ -1436,9 +1435,33 @@ static int cdns_uart_resume(struct device *device) return uart_resume_port(&cdns_uart_uart_driver, port); } #endif /* ! CONFIG_PM_SLEEP */ +static int __maybe_unused cdns_runtime_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct uart_port *port = platform_get_drvdata(pdev); + struct cdns_uart *cdns_uart = port->private_data; -static SIMPLE_DEV_PM_OPS(cdns_uart_dev_pm_ops, cdns_uart_suspend, - cdns_uart_resume); + clk_disable(cdns_uart->uartclk); + clk_disable(cdns_uart->pclk); + return 0; +}; + +static int __maybe_unused cdns_runtime_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct uart_port *port = platform_get_drvdata(pdev); + struct cdns_uart *cdns_uart = port->private_data; + + clk_enable(cdns_uart->pclk); + clk_enable(cdns_uart->uartclk); + return 0; +}; + +static const struct dev_pm_ops cdns_uart_dev_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(cdns_uart_suspend, cdns_uart_resume) + SET_RUNTIME_PM_OPS(cdns_runtime_suspend, + cdns_runtime_resume, NULL) +}; static const struct cdns_platform_data zynqmp_uart_def = { .quirks = CDNS_UART_RXBS_SUPPORT, }; @@ -1558,6 +1581,11 @@ static int cdns_uart_probe(struct platform_device *pdev) cdns_uart_data->port = port; platform_set_drvdata(pdev, port); + pm_runtime_use_autosuspend(&pdev->dev); + pm_runtime_set_autosuspend_delay(&pdev->dev, UART_AUTOSUSPEND_TIMEOUT); + pm_runtime_enable(&pdev->dev); + pm_runtime_set_active(&pdev->dev); + rc = uart_add_one_port(&cdns_uart_uart_driver, port); if (rc) { dev_err(&pdev->dev, @@ -1573,6 +1601,9 @@ err_out_notif_unreg: &cdns_uart_data->clk_rate_change_nb); #endif err_out_clk_disable: + pm_runtime_disable(&pdev->dev); + pm_runtime_set_suspended(&pdev->dev); + pm_runtime_dont_use_autosuspend(&pdev->dev); clk_unprepare(cdns_uart_data->uartclk); err_out_clk_dis_pclk: clk_unprepare(cdns_uart_data->pclk); @@ -1601,6 +1632,9 @@ static int cdns_uart_remove(struct platform_device *pdev) port->mapbase = 0; clk_unprepare(cdns_uart_data->uartclk); clk_unprepare(cdns_uart_data->pclk); + pm_runtime_disable(&pdev->dev); + pm_runtime_set_suspended(&pdev->dev); + pm_runtime_dont_use_autosuspend(&pdev->dev); return rc; } -- cgit v1.2.3 From d437fa9109bab8b83a9427d48bebff6c3e053010 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Thu, 16 Feb 2017 23:11:44 -0800 Subject: drivers/tty: Convert remaining uses of pr_warning to pr_warn To enable eventual removal of pr_warning This makes pr_warn use consistent for drivers/tty Prior to this patch, there were 2 uses of pr_warning and 23 uses of pr_warn in drivers/tty Signed-off-by: Joe Perches Signed-off-by: Greg Kroah-Hartman --- drivers/tty/hvc/hvcs.c | 2 +- drivers/tty/tty_io.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c index 7823d6d998cf..99bb875178d7 100644 --- a/drivers/tty/hvc/hvcs.c +++ b/drivers/tty/hvc/hvcs.c @@ -1575,7 +1575,7 @@ static int __init hvcs_module_init(void) */ rc = driver_create_file(&(hvcs_vio_driver.driver), &driver_attr_rescan); if (rc) - pr_warning("HVCS: Failed to create rescan file (err %d)\n", rc); + pr_warn("HVCS: Failed to create rescan file (err %d)\n", rc); return 0; } diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index e6d1a6510886..de4543ee290b 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -2843,8 +2843,8 @@ static void tty_warn_deprecated_flags(struct serial_struct __user *ss) flags &= ASYNC_DEPRECATED; if (flags && __ratelimit(&depr_flags)) - pr_warning("%s: '%s' is using deprecated serial flags (with no effect): %.8x\n", - __func__, get_task_comm(comm, current), flags); + pr_warn("%s: '%s' is using deprecated serial flags (with no effect): %.8x\n", + __func__, get_task_comm(comm, current), flags); } /* -- cgit v1.2.3 From 47baf1ad81ed10c158c314ab9f304e674ae32531 Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Mon, 13 Mar 2017 12:00:50 +0100 Subject: tty: n_gsm: Use net_device_stats from struct net_device Instead of using a private copy of struct net_device_stats in struct gsm_mux_net, use stats from struct net_device. Also remove the now unnecessary .ndo_get_stats function. Signed-off-by: Tobias Klauser Signed-off-by: Greg Kroah-Hartman --- drivers/tty/n_gsm.c | 21 ++++++--------------- 1 file changed, 6 insertions(+), 15 deletions(-) diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index 55577cf9b6a4..2667a205a5ab 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -89,18 +89,14 @@ module_param(debug, int, 0600); /** * struct gsm_mux_net - network interface * @struct gsm_dlci* dlci - * @struct net_device_stats stats; * * Created when net interface is initialized. **/ struct gsm_mux_net { struct kref ref; struct gsm_dlci *dlci; - struct net_device_stats stats; }; -#define STATS(net) (((struct gsm_mux_net *)netdev_priv(net))->stats) - /* * Each block of data we have queued to go out is in the form of * a gsm_msg which holds everything we need in a link layer independent @@ -2613,10 +2609,6 @@ static int gsm_mux_net_close(struct net_device *net) return 0; } -static struct net_device_stats *gsm_mux_net_get_stats(struct net_device *net) -{ - return &((struct gsm_mux_net *)netdev_priv(net))->stats; -} static void dlci_net_free(struct gsm_dlci *dlci) { if (!dlci->net) { @@ -2660,8 +2652,8 @@ static int gsm_mux_net_start_xmit(struct sk_buff *skb, muxnet_get(mux_net); skb_queue_head(&dlci->skb_list, skb); - STATS(net).tx_packets++; - STATS(net).tx_bytes += skb->len; + net->stats.tx_packets++; + net->stats.tx_bytes += skb->len; gsm_dlci_data_kick(dlci); /* And tell the kernel when the last transmit started. */ netif_trans_update(net); @@ -2676,7 +2668,7 @@ static void gsm_mux_net_tx_timeout(struct net_device *net) dev_dbg(&net->dev, "Tx timed out.\n"); /* Update statistics */ - STATS(net).tx_errors++; + net->stats.tx_errors++; } static void gsm_mux_rx_netchar(struct gsm_dlci *dlci, @@ -2691,7 +2683,7 @@ static void gsm_mux_rx_netchar(struct gsm_dlci *dlci, skb = dev_alloc_skb(size + NET_IP_ALIGN); if (!skb) { /* We got no receive buffer. */ - STATS(net).rx_dropped++; + net->stats.rx_dropped++; muxnet_put(mux_net); return; } @@ -2705,8 +2697,8 @@ static void gsm_mux_rx_netchar(struct gsm_dlci *dlci, netif_rx(skb); /* update out statistics */ - STATS(net).rx_packets++; - STATS(net).rx_bytes += size; + net->stats.rx_packets++; + net->stats.rx_bytes += size; muxnet_put(mux_net); return; } @@ -2718,7 +2710,6 @@ static void gsm_mux_net_init(struct net_device *net) .ndo_stop = gsm_mux_net_close, .ndo_start_xmit = gsm_mux_net_start_xmit, .ndo_tx_timeout = gsm_mux_net_tx_timeout, - .ndo_get_stats = gsm_mux_net_get_stats, }; net->netdev_ops = &gsm_netdev_ops; -- cgit v1.2.3 From 0dcc0542a00656f6b4ae0ff9f0ba06b6ceec257e Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Tue, 14 Mar 2017 14:11:25 +0100 Subject: serial: altera_jtaguart: add earlycon support Nios2 currently uses its own early printk implementation, rather than using unified earlycon support to show boot messages on altera_jtaguart (and altera_uart for that matter). Add earlycon support to altera_jtaguart so that other archs may use it. Also, this will allow the early printk implementation in arch/nios2 to eventually be removed in a future patch. Cc: Ley Foon Tan Signed-off-by: Tobias Klauser Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/Kconfig | 1 + drivers/tty/serial/altera_jtaguart.c | 20 ++++++++++++++++++++ 2 files changed, 21 insertions(+) diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 6117ac8da48f..d8495b9fd0ce 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1343,6 +1343,7 @@ config SERIAL_ALTERA_JTAGUART_CONSOLE bool "Altera JTAG UART console support" depends on SERIAL_ALTERA_JTAGUART=y select SERIAL_CORE_CONSOLE + select SERIAL_EARLYCON help Enable a Altera JTAG UART port to be the system console. diff --git a/drivers/tty/serial/altera_jtaguart.c b/drivers/tty/serial/altera_jtaguart.c index e409d7dac7ab..18e3f8342b85 100644 --- a/drivers/tty/serial/altera_jtaguart.c +++ b/drivers/tty/serial/altera_jtaguart.c @@ -383,6 +383,26 @@ console_initcall(altera_jtaguart_console_init); #define ALTERA_JTAGUART_CONSOLE (&altera_jtaguart_console) +static void altera_jtaguart_earlycon_write(struct console *co, const char *s, + unsigned int count) +{ + struct earlycon_device *dev = co->data; + + uart_console_write(&dev->port, s, count, altera_jtaguart_console_putc); +} + +static int __init altera_jtaguart_earlycon_setup(struct earlycon_device *dev, + const char *options) +{ + if (!dev->port.membase) + return -ENODEV; + + dev->con->write = altera_jtaguart_earlycon_write; + return 0; +} + +OF_EARLYCON_DECLARE(juart, "altr,juart-1.0", altera_jtaguart_earlycon_setup); + #else #define ALTERA_JTAGUART_CONSOLE NULL -- cgit v1.2.3 From 9d1d994d33fe4863c8caeeaac264664815f4c321 Mon Sep 17 00:00:00 2001 From: Andrey Smirnov Date: Thu, 16 Mar 2017 08:14:16 -0700 Subject: linux/serdev.h: Replace 'ctrl->serdev' with 'serdev' Replace 'ctrl->serdev' with 'serdev' in serdev_controller_write_wakeup() and serdev_controller_receive_buf(). Cc: Rob Herring Cc: cphealy@gmail.com Cc: linux-serial@vger.kernel.org Cc: linux-kernel@vger.kernel.org Acked-by: Rob Herring Signed-off-by: Andrey Smirnov Signed-off-by: Greg Kroah-Hartman --- include/linux/serdev.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/linux/serdev.h b/include/linux/serdev.h index 9519da6253a8..5176cdc2057f 100644 --- a/include/linux/serdev.h +++ b/include/linux/serdev.h @@ -165,7 +165,7 @@ static inline void serdev_controller_write_wakeup(struct serdev_controller *ctrl if (!serdev || !serdev->ops->write_wakeup) return; - serdev->ops->write_wakeup(ctrl->serdev); + serdev->ops->write_wakeup(serdev); } static inline int serdev_controller_receive_buf(struct serdev_controller *ctrl, @@ -177,7 +177,7 @@ static inline int serdev_controller_receive_buf(struct serdev_controller *ctrl, if (!serdev || !serdev->ops->receive_buf) return -EINVAL; - return serdev->ops->receive_buf(ctrl->serdev, data, count); + return serdev->ops->receive_buf(serdev, data, count); } #if IS_ENABLED(CONFIG_SERIAL_DEV_BUS) -- cgit v1.2.3 From 81e33b51ed69d2b2eaf3fbeb043144b9d9ec7629 Mon Sep 17 00:00:00 2001 From: Shubhrajyoti Datta Date: Wed, 15 Mar 2017 08:38:56 -0700 Subject: serial: xuartps: Cleanup the clock enable The core handles the clocking now. Remove the clock disable in suspend. In resume we enable the clocks and disable after register write. Signed-off-by: Shubhrajyoti Datta Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/xilinx_uartps.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c index 7afa50b07875..a83033774382 100644 --- a/drivers/tty/serial/xilinx_uartps.c +++ b/drivers/tty/serial/xilinx_uartps.c @@ -1352,12 +1352,7 @@ static int cdns_uart_suspend(struct device *device) * the suspend. */ uart_suspend_port(&cdns_uart_uart_driver, port); - if (console_suspend_enabled && !may_wake) { - struct cdns_uart *cdns_uart = port->private_data; - - clk_disable(cdns_uart->uartclk); - clk_disable(cdns_uart->pclk); - } else { + if (!(console_suspend_enabled && !may_wake)) { unsigned long flags = 0; spin_lock_irqsave(&port->lock, flags); @@ -1422,6 +1417,8 @@ static int cdns_uart_resume(struct device *device) ctrl_reg |= CDNS_UART_CR_TX_EN | CDNS_UART_CR_RX_EN; writel(ctrl_reg, port->membase + CDNS_UART_CR); + clk_disable(cdns_uart->uartclk); + clk_disable(cdns_uart->pclk); spin_unlock_irqrestore(&port->lock, flags); } else { spin_lock_irqsave(&port->lock, flags); -- cgit v1.2.3 From b44b96a060f3fd06456214cac7dfdd3ddf0caf2b Mon Sep 17 00:00:00 2001 From: Sam Povilus Date: Wed, 15 Mar 2017 20:43:24 -0600 Subject: uartlite: Adding a kernel parameter for the number of uartlites The number of uartlites should be set by a kernel parameter instead of using a #define. This allows the user to set the number of uartlites using only kconfig and not modifying kernel source. The uartlite is used by FPGAs that support a basically unlimited number of uarts so limiting it at 16 dosn't make sense as users might need more than that. Signed-off-by: Sam Povilus Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/Kconfig | 9 +++++++++ drivers/tty/serial/uartlite.c | 2 +- 2 files changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index d8495b9fd0ce..896f5eb78da0 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -630,6 +630,15 @@ config SERIAL_UARTLITE_CONSOLE console (the system console is the device which receives all kernel messages and warnings and which allows logins in single user mode). +config SERIAL_UARTLITE_NR_UARTS + int "Maximum number of uartlite serial ports" + depends on SERIAL_UARTLITE + range 1 256 + default 1 + help + Set this to the number of uartlites in your system, or the number + you think you might implement. + config SERIAL_SUNCORE bool depends on SPARC diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c index 817bb0d3f326..c9b8d702dadc 100644 --- a/drivers/tty/serial/uartlite.c +++ b/drivers/tty/serial/uartlite.c @@ -28,7 +28,7 @@ #define ULITE_NAME "ttyUL" #define ULITE_MAJOR 204 #define ULITE_MINOR 187 -#define ULITE_NR_UARTS 16 +#define ULITE_NR_UARTS CONFIG_SERIAL_UARTLITE_NR_UARTS /* --------------------------------------------------------------------- * Register definitions -- cgit v1.2.3 From 77dae6134440420bac334581a3ccee94cee1c054 Mon Sep 17 00:00:00 2001 From: Wang YanQing Date: Wed, 22 Feb 2017 19:37:08 +0800 Subject: tty: pty: Fix ldisc flush after userspace become aware of the data already While using emacs, cat or others' commands in konsole with recent kernels, I have met many times that CTRL-C freeze konsole. After konsole freeze I can't type anything, then I have to open a new one, it is very annoying. See bug report: https://bugs.kde.org/show_bug.cgi?id=175283 The platform in that bug report is Solaris, but now the pty in linux has the same problem or the same behavior as Solaris :) It has high possibility to trigger the problem follow steps below: Note: In my test, BigFile is a text file whose size is bigger than 1G 1:open konsole 1:cat BigFile 2:CTRL-C After some digging, I find out the reason is that commit 1d1d14da12e7 ("pty: Fix buffer flush deadlock") changes the behavior of pty_flush_buffer. Thread A Thread B -------- -------- 1:n_tty_poll return POLLIN 2:CTRL-C trigger pty_flush_buffer tty_buffer_flush n_tty_flush_buffer 3:attempt to check count of chars: ioctl(fd, TIOCINQ, &available) available is equal to 0 4:read(fd, buffer, avaiable) return 0 5:konsole close fd Yes, I know we could use the same patch included in the BUG report as a workaround for linux platform too. But I think the data in ldisc is belong to application of another side, we shouldn't clear it when we want to flush write buffer of this side in pty_flush_buffer. So I think it is better to disable ldisc flush in pty_flush_buffer, because its new hehavior bring no benefit except that it mess up the behavior between POLLIN, and TIOCINQ or FIONREAD. Also I find no flush_buffer function in others' tty driver has the same behavior as current pty_flush_buffer. Fixes: 1d1d14da12e7 ("pty: Fix buffer flush deadlock") CC: stable@vger.kernel.org # v4.0+ Signed-off-by: Wang YanQing Signed-off-by: Greg Kroah-Hartman --- drivers/tty/pty.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c index 66b59a15780d..65799575c666 100644 --- a/drivers/tty/pty.c +++ b/drivers/tty/pty.c @@ -216,16 +216,11 @@ static int pty_signal(struct tty_struct *tty, int sig) static void pty_flush_buffer(struct tty_struct *tty) { struct tty_struct *to = tty->link; - struct tty_ldisc *ld; if (!to) return; - ld = tty_ldisc_ref(to); - tty_buffer_flush(to, ld); - if (ld) - tty_ldisc_deref(ld); - + tty_buffer_flush(to, NULL); if (to->packet) { spin_lock_irq(&tty->ctrl_lock); tty->ctrl_status |= TIOCPKT_FLUSHWRITE; -- cgit v1.2.3 From 71472fa9c52b1da27663c275d416d8654b905f05 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Thu, 16 Mar 2017 14:08:26 +1100 Subject: tty: Fix ldisc crash on reopened tty If the tty has been hungup, the ldisc instance may have been destroyed. Continued input to the tty will be ignored as long as the ldisc instance is not visible to the flush_to_ldisc kworker. However, when the tty is reopened and a new ldisc instance is created, the flush_to_ldisc kworker can obtain an ldisc reference before the new ldisc is completely initialized. This will likely crash: BUG: unable to handle kernel paging request at 0000000000002260 IP: [] n_tty_receive_buf_common+0x6d/0xb80 PGD 2ab581067 PUD 290c11067 PMD 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: nls_iso8859_1 ip6table_filter [.....] CPU: 2 PID: 103 Comm: kworker/u16:1 Not tainted 4.6.0-rc7+wip-xeon+debug #rc7+wip Hardware name: Dell Inc. Precision WorkStation T5400 /0RW203, BIOS A11 04/30/2012 Workqueue: events_unbound flush_to_ldisc task: ffff8802ad16d100 ti: ffff8802ad31c000 task.ti: ffff8802ad31c000 RIP: 0010:[] [] n_tty_receive_buf_common+0x6d/0xb80 RSP: 0018:ffff8802ad31fc70 EFLAGS: 00010296 RAX: 0000000000000000 RBX: ffff8802aaddd800 RCX: 0000000000000001 RDX: 00000000ffffffff RSI: ffffffff810db48f RDI: 0000000000000246 RBP: ffff8802ad31fd08 R08: 0000000000000000 R09: 0000000000000001 R10: ffff8802aadddb28 R11: 0000000000000001 R12: ffff8800ba6da808 R13: ffff8802ad18be80 R14: ffff8800ba6da858 R15: ffff8800ba6da800 FS: 0000000000000000(0000) GS:ffff8802b0a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000002260 CR3: 000000028ee5d000 CR4: 00000000000006e0 Stack: ffffffff81531219 ffff8802aadddab8 ffff8802aadddde0 ffff8802aadddd78 ffffffff00000001 ffff8800ba6da858 ffff8800ba6da860 ffff8802ad31fd30 ffffffff81885f78 ffffffff81531219 0000000000000000 0000000200000000 Call Trace: [] ? flush_to_ldisc+0x49/0xd0 [] ? mutex_lock_nested+0x2c8/0x430 [] ? flush_to_ldisc+0x49/0xd0 [] n_tty_receive_buf2+0x14/0x20 [] tty_ldisc_receive_buf+0x22/0x50 [] flush_to_ldisc+0xbe/0xd0 [] process_one_work+0x1ed/0x6e0 [] ? process_one_work+0x16f/0x6e0 [] worker_thread+0x4e/0x490 [] ? process_one_work+0x6e0/0x6e0 [] kthread+0xf2/0x110 [] ? preempt_count_sub+0x4c/0x80 [] ret_from_fork+0x22/0x50 [] ? kthread_create_on_node+0x220/0x220 Code: ff ff e8 27 a0 35 00 48 8d 83 78 05 00 00 c7 45 c0 00 00 00 00 48 89 45 80 48 8d 83 e0 05 00 00 48 89 85 78 ff ff ff 48 8b 45 b8 <48> 8b b8 60 22 00 00 48 8b 30 89 f8 8b 8b 88 04 00 00 29 f0 8d RIP [] n_tty_receive_buf_common+0x6d/0xb80 RSP CR2: 0000000000002260 Ensure the kworker cannot obtain the ldisc reference until the new ldisc is completely initialized. Fixes: 892d1fa7eaae ("tty: Destroy ldisc instance on hangup") Reported-by: Mikulas Patocka Signed-off-by: Peter Hurley Signed-off-by: Michael Neuling Signed-off-by: Greg Kroah-Hartman --- drivers/tty/tty_ldisc.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c index 68947f6de5ad..4ee7742dced3 100644 --- a/drivers/tty/tty_ldisc.c +++ b/drivers/tty/tty_ldisc.c @@ -669,16 +669,17 @@ int tty_ldisc_reinit(struct tty_struct *tty, int disc) tty_ldisc_put(tty->ldisc); } - /* switch the line discipline */ - tty->ldisc = ld; tty_set_termios_ldisc(tty, disc); - retval = tty_ldisc_open(tty, tty->ldisc); + retval = tty_ldisc_open(tty, ld); if (retval) { if (!WARN_ON(disc == N_TTY)) { - tty_ldisc_put(tty->ldisc); - tty->ldisc = NULL; + tty_ldisc_put(ld); + ld = NULL; } } + + /* switch the line discipline */ + smp_store_release(&tty->ldisc, ld); return retval; } -- cgit v1.2.3 From fab8a02b73eb2a42c589f943c377143f04b2bb73 Mon Sep 17 00:00:00 2001 From: Lukas Redlinger Date: Tue, 14 Mar 2017 15:09:14 +0100 Subject: serial: 8250_fintek: Enable high speed mode on Fintek F81866 Fintek F81866 supports baud rates higher than 115200 but needs to raise it's clock speed from 1.84 to 14.76 MHz. This is eight times faster, so gives 921600 as resulting baud_base. F81866 clock register 0xf2: Bit 7-2 reserved Bit 1-0 00: 1.8432MHz 01: 18.432MHz 10: 24MHz 11: 14.769MHz Signed-off-by: Lukas Redlinger Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_fintek.c | 43 +++++++++++++++++++++++++++++++---- 1 file changed, 38 insertions(+), 5 deletions(-) diff --git a/drivers/tty/serial/8250/8250_fintek.c b/drivers/tty/serial/8250/8250_fintek.c index b67e7a544935..e500f7dd2470 100644 --- a/drivers/tty/serial/8250/8250_fintek.c +++ b/drivers/tty/serial/8250/8250_fintek.c @@ -61,6 +61,12 @@ * The IRQ setting mode of F81866 is not the same with F81216 series. * Level/Low: IRQ_MODE0:0, IRQ_MODE1:0 * Edge/High: IRQ_MODE0:1, IRQ_MODE1:0 + * + * Clock speeds for UART (register F2h) + * 00: 1.8432MHz. + * 01: 18.432MHz. + * 10: 24MHz. + * 11: 14.769MHz. */ #define F81866_IRQ_MODE 0xf0 #define F81866_IRQ_SHARE BIT(0) @@ -72,6 +78,13 @@ #define F81866_LDN_LOW 0x10 #define F81866_LDN_HIGH 0x16 +#define F81866_UART_CLK 0xF2 +#define F81866_UART_CLK_MASK (BIT(1) | BIT(0)) +#define F81866_UART_CLK_1_8432MHZ 0 +#define F81866_UART_CLK_14_769MHZ (BIT(1) | BIT(0)) +#define F81866_UART_CLK_18_432MHZ BIT(0) +#define F81866_UART_CLK_24MHZ BIT(1) + struct fintek_8250 { u16 pid; u16 base_port; @@ -256,8 +269,26 @@ static void fintek_8250_set_max_fifo(struct fintek_8250 *pdata) } } -static int probe_setup_port(struct fintek_8250 *pdata, u16 io_address, - unsigned int irq) +static void fintek_8250_goto_highspeed(struct uart_8250_port *uart, + struct fintek_8250 *pdata) +{ + sio_write_reg(pdata, LDN, pdata->index); + + switch (pdata->pid) { + case CHIP_ID_F81866: /* set uart clock for high speed serial mode */ + sio_write_mask_reg(pdata, F81866_UART_CLK, + F81866_UART_CLK_MASK, + F81866_UART_CLK_14_769MHZ); + + uart->port.uartclk = 921600 * 16; + break; + default: /* leave clock speed untouched */ + break; + } +} + +static int probe_setup_port(struct fintek_8250 *pdata, + struct uart_8250_port *uart) { static const u16 addr[] = {0x4e, 0x2e}; static const u8 keys[] = {0x77, 0xa0, 0x87, 0x67}; @@ -284,18 +315,20 @@ static int probe_setup_port(struct fintek_8250 *pdata, u16 io_address, sio_write_reg(pdata, LDN, k); aux = sio_read_reg(pdata, IO_ADDR1); aux |= sio_read_reg(pdata, IO_ADDR2) << 8; - if (aux != io_address) + if (aux != uart->port.iobase) continue; pdata->index = k; - irq_data = irq_get_irq_data(irq); + irq_data = irq_get_irq_data(uart->port.irq); if (irq_data) level_mode = irqd_is_level_type(irq_data); fintek_8250_set_irq_mode(pdata, level_mode); fintek_8250_set_max_fifo(pdata); + fintek_8250_goto_highspeed(uart, pdata); + fintek_8250_exit_key(addr[i]); return 0; @@ -330,7 +363,7 @@ int fintek_8250_probe(struct uart_8250_port *uart) struct fintek_8250 *pdata; struct fintek_8250 probe_data; - if (probe_setup_port(&probe_data, uart->port.iobase, uart->port.irq)) + if (probe_setup_port(&probe_data, uart)) return -ENODEV; pdata = devm_kzalloc(uart->port.dev, sizeof(*pdata), GFP_KERNEL); -- cgit v1.2.3 From 22077b091a4720d4336bd806e9c93b2a81fcc38a Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 15 Mar 2017 12:00:23 +0100 Subject: tty: serial_core, remove state checks in uart_poll* Coverity complains about uart_state checks in polling functions. And it is indeed correct. We do something like this: struct uart_state *state = drv->state + line; if (!state) return; Adding 'line' to drv->state would move the potential NULL pointer to something near NULL and the check is useless. Even if we checked pure drv->state, nothing guarantees it is not freed and NULLed after the check. So if the only user of this interface (kgdboc) needs to assure something, this is neither the correct thing, nor place to do so. Signed-off-by: Jiri Slaby Cc: linux-serial@vger.kernel.org Cc: Jason Wessel Cc: kgdb-bugreport@lists.sourceforge.net Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/serial_core.c | 17 +++++------------ 1 file changed, 5 insertions(+), 12 deletions(-) diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 3fe56894974a..0fb3f7cce62a 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -2331,9 +2331,6 @@ static int uart_poll_init(struct tty_driver *driver, int line, char *options) int flow = 'n'; int ret = 0; - if (!state) - return -1; - tport = &state->port; mutex_lock(&tport->mutex); @@ -2368,13 +2365,12 @@ static int uart_poll_get_char(struct tty_driver *driver, int line) struct uart_port *port; int ret = -1; - if (state) { - port = uart_port_ref(state); - if (port) { - ret = port->ops->poll_get_char(port); - uart_port_deref(port); - } + port = uart_port_ref(state); + if (port) { + ret = port->ops->poll_get_char(port); + uart_port_deref(port); } + return ret; } @@ -2384,9 +2380,6 @@ static void uart_poll_put_char(struct tty_driver *driver, int line, char ch) struct uart_state *state = drv->state + line; struct uart_port *port; - if (!state) - return; - port = uart_port_ref(state); if (!port) return; -- cgit v1.2.3 From acbdad8dd1abd98b216d8c37ff9c6de4aa595534 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Wed, 15 Mar 2017 12:31:50 +0100 Subject: serial: 8250_dw: simplify optional reset handling As of commit bb475230b8e5 ("reset: make optional functions really optional"), the reset framework API calls use NULL pointers to describe optional, non-present reset controls. This allows to return errors from devm_reset_control_get_optional and to call reset_control_(de)assert unconditionally. Signed-off-by: Philipp Zabel Reviewed-by: Andy Shevchenko Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_dw.c | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-) diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index 6ee55a2d47bb..e0215db44e6e 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -525,12 +525,11 @@ static int dw8250_probe(struct platform_device *pdev) } data->rst = devm_reset_control_get_optional(dev, NULL); - if (IS_ERR(data->rst) && PTR_ERR(data->rst) == -EPROBE_DEFER) { - err = -EPROBE_DEFER; + if (IS_ERR(data->rst)) { + err = PTR_ERR(data->rst); goto err_pclk; } - if (!IS_ERR(data->rst)) - reset_control_deassert(data->rst); + reset_control_deassert(data->rst); dw8250_quirks(p, data); @@ -562,8 +561,7 @@ static int dw8250_probe(struct platform_device *pdev) return 0; err_reset: - if (!IS_ERR(data->rst)) - reset_control_assert(data->rst); + reset_control_assert(data->rst); err_pclk: if (!IS_ERR(data->pclk)) @@ -584,8 +582,7 @@ static int dw8250_remove(struct platform_device *pdev) serial8250_unregister_port(data->line); - if (!IS_ERR(data->rst)) - reset_control_assert(data->rst); + reset_control_assert(data->rst); if (!IS_ERR(data->pclk)) clk_disable_unprepare(data->pclk); -- cgit v1.2.3 From 896d81fefe5d1919537db2c2150ab6384e4a6610 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 29 Mar 2017 07:50:49 +0200 Subject: Revert "tty: Fix ldisc crash on reopened tty" This reverts commit 71472fa9c52b1da27663c275d416d8654b905f05. It caused merge issues, and Dmitry found some review issues. Reported-by: Dmitry Vyukov Reported-by: Stephen Rothwell Cc: Mikulas Patocka Cc: Peter Hurley Cc: Michael Neuling Signed-off-by: Greg Kroah-Hartman --- drivers/tty/tty_ldisc.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c index 4ee7742dced3..68947f6de5ad 100644 --- a/drivers/tty/tty_ldisc.c +++ b/drivers/tty/tty_ldisc.c @@ -669,17 +669,16 @@ int tty_ldisc_reinit(struct tty_struct *tty, int disc) tty_ldisc_put(tty->ldisc); } + /* switch the line discipline */ + tty->ldisc = ld; tty_set_termios_ldisc(tty, disc); - retval = tty_ldisc_open(tty, ld); + retval = tty_ldisc_open(tty, tty->ldisc); if (retval) { if (!WARN_ON(disc == N_TTY)) { - tty_ldisc_put(ld); - ld = NULL; + tty_ldisc_put(tty->ldisc); + tty->ldisc = NULL; } } - - /* switch the line discipline */ - smp_store_release(&tty->ldisc, ld); return retval; } -- cgit v1.2.3 From 6a7e6f78c235975cc14d4e141fa088afffe7062c Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 30 Mar 2017 15:39:34 +0200 Subject: tty: close race between device register and open The tty class device is currently not registered until after the character device has been registered thereby leaving a small window were a racing open could end up with a NULL tty->dev pointer due to the class-device lookup failing in alloc_tty_struct. Close this race by registering the class device before the character device while making sure to defer the user-space uevent notification until after the character device has been registered. Note that some tty drivers expect a valid tty->dev and would misbehave or crash otherwise. Some line disciplines also currently dereference the class device unconditionally despite the fact that not every tty is guaranteed to have one (Unix98 pty), but this is being fixed separately. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/tty/tty_io.c | 40 ++++++++++++++++++++-------------------- 1 file changed, 20 insertions(+), 20 deletions(-) diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index de4543ee290b..8e9651579d50 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -3293,9 +3293,8 @@ struct device *tty_register_device_attr(struct tty_driver *driver, { char name[64]; dev_t devt = MKDEV(driver->major, driver->minor_start) + index; - struct device *dev = NULL; - int retval = -ENODEV; - bool cdev = false; + struct device *dev; + int retval; if (index >= driver->num) { pr_err("%s: Attempt to register invalid tty line number (%d)\n", @@ -3308,18 +3307,9 @@ struct device *tty_register_device_attr(struct tty_driver *driver, else tty_line_name(driver, index, name); - if (!(driver->flags & TTY_DRIVER_DYNAMIC_ALLOC)) { - retval = tty_cdev_add(driver, devt, index, 1); - if (retval) - goto error; - cdev = true; - } - dev = kzalloc(sizeof(*dev), GFP_KERNEL); - if (!dev) { - retval = -ENOMEM; - goto error; - } + if (!dev) + return ERR_PTR(-ENOMEM); dev->devt = devt; dev->class = tty_class; @@ -3329,18 +3319,28 @@ struct device *tty_register_device_attr(struct tty_driver *driver, dev->groups = attr_grp; dev_set_drvdata(dev, drvdata); + dev_set_uevent_suppress(dev, 1); + retval = device_register(dev); if (retval) - goto error; + goto err_put; + + if (!(driver->flags & TTY_DRIVER_DYNAMIC_ALLOC)) { + retval = tty_cdev_add(driver, devt, index, 1); + if (retval) + goto err_del; + } + + dev_set_uevent_suppress(dev, 0); + kobject_uevent(&dev->kobj, KOBJ_ADD); return dev; -error: +err_del: + device_del(dev); +err_put: put_device(dev); - if (cdev) { - cdev_del(driver->cdevs[index]); - driver->cdevs[index] = NULL; - } + return ERR_PTR(retval); } EXPORT_SYMBOL_GPL(tty_register_device_attr); -- cgit v1.2.3 From 16b00ae82dce0e36384744553c6e9e97070813e8 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 30 Mar 2017 15:39:35 +0200 Subject: tty: drop obsolete termios_locked comments Drop comments about tty-driver termios_locked structures, which have been outdated since commit fe6e29fdb1a7 ("tty: simplify ktermios allocation"). Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/tty/tty_io.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index 8e9651579d50..5f834dcb0b15 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -1520,7 +1520,7 @@ struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx) * This code guarantees that either everything succeeds and the * TTY is ready for operation, or else the table slots are vacated * and the allocated memory released. (Except that the termios - * and locked termios may be retained.) + * may be retained.) */ if (!try_module_get(driver->owner)) @@ -3441,11 +3441,6 @@ static void destruct_tty_driver(struct kref *kref) struct ktermios *tp; if (driver->flags & TTY_DRIVER_INSTALLED) { - /* - * Free the termios and termios_locked structures because - * we don't want to get memory leaks when modular tty - * drivers are removed from the kernel. - */ for (i = 0; i < driver->num; i++) { tp = driver->termios[i]; if (tp) { -- cgit v1.2.3 From 93857edd9829e144acb6c7e72d593f6e01aead66 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 30 Mar 2017 15:39:36 +0200 Subject: tty: reset termios state on device registration MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Free any saved termios data when registering a tty device so that the termios state is reset when reusing a minor number. This is useful for hot-pluggable buses such as USB where it does not make much sense to reuse saved termios data from an unrelated device when a new device is later plugged in. This specifically avoids a situation where the new device does not have the carrier-detect signal wired, but the saved termios state has CLOCAL cleared, effectively preventing the port from being opened in blocking mode as noted by Jan Kundrát . Note that clearing the saved data at deregistration would not work as the device could still be open. Also note that the termios data is not reset for drivers with TTY_DRIVER_DYNAMIC_ALLOC set (e.g. legacy pty) as their character device is registered at driver registration and could theoretically already have been opened (and pty termios state is never saved anyway). Reported-by: Jan Kundrát Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/tty/tty_io.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index 5f834dcb0b15..d697053f5e42 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -3293,6 +3293,7 @@ struct device *tty_register_device_attr(struct tty_driver *driver, { char name[64]; dev_t devt = MKDEV(driver->major, driver->minor_start) + index; + struct ktermios *tp; struct device *dev; int retval; @@ -3326,6 +3327,16 @@ struct device *tty_register_device_attr(struct tty_driver *driver, goto err_put; if (!(driver->flags & TTY_DRIVER_DYNAMIC_ALLOC)) { + /* + * Free any saved termios data so that the termios state is + * reset when reusing a minor number. + */ + tp = driver->termios[index]; + if (tp) { + driver->termios[index] = NULL; + kfree(tp); + } + retval = tty_cdev_add(driver, devt, index, 1); if (retval) goto err_del; -- cgit v1.2.3 From 19fa6e601b251f13400767813372944b3e2f444b Mon Sep 17 00:00:00 2001 From: Denis Kirjanov Date: Thu, 30 Mar 2017 10:06:19 -0400 Subject: tty/hvc_console: fix console lock ordering with spinlock hvc_remove() takes a spin lock first then acquires the console semaphore. This situation can easily lead to a deadlock scenario where we call scheduler with spin lock held. Signed-off-by: Denis Kirjanov Signed-off-by: Greg Kroah-Hartman --- drivers/tty/hvc/hvc_console.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c index b19ae36a05ec..a8d399188242 100644 --- a/drivers/tty/hvc/hvc_console.c +++ b/drivers/tty/hvc/hvc_console.c @@ -920,17 +920,17 @@ int hvc_remove(struct hvc_struct *hp) tty = tty_port_tty_get(&hp->port); + console_lock(); spin_lock_irqsave(&hp->lock, flags); if (hp->index < MAX_NR_HVC_CONSOLES) { - console_lock(); vtermnos[hp->index] = -1; cons_ops[hp->index] = NULL; - console_unlock(); } /* Don't whack hp->irq because tty_hangup() will need to free the irq. */ spin_unlock_irqrestore(&hp->lock, flags); + console_unlock(); /* * We 'put' the instance that was grabbed when the kref instance -- cgit v1.2.3 From ef49ffd8b5e5a2302c5aa6828619d4c616ab04aa Mon Sep 17 00:00:00 2001 From: Lionel Debieve Date: Wed, 22 Mar 2017 18:12:31 +0100 Subject: tty: serial: st-asc: Make the locking RT aware The lock is a sleeping lock and local_irq_save() is not the standard implementation now. Working for both -RT and non RT. Signed-off-by: Lionel Debieve Acked-by: Sebastian Andrzej Siewior Acked-by: Patrice Chotard Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/st-asc.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/tty/serial/st-asc.c b/drivers/tty/serial/st-asc.c index c334bcc59c64..4889396d4c45 100644 --- a/drivers/tty/serial/st-asc.c +++ b/drivers/tty/serial/st-asc.c @@ -887,13 +887,12 @@ static void asc_console_write(struct console *co, const char *s, unsigned count) int locked = 1; u32 intenable; - local_irq_save(flags); if (port->sysrq) locked = 0; /* asc_interrupt has already claimed the lock */ else if (oops_in_progress) - locked = spin_trylock(&port->lock); + locked = spin_trylock_irqsave(&port->lock, flags); else - spin_lock(&port->lock); + spin_lock_irqsave(&port->lock, flags); /* * Disable interrupts so we don't get the IRQ line bouncing @@ -911,8 +910,7 @@ static void asc_console_write(struct console *co, const char *s, unsigned count) asc_out(port, ASC_INTEN, intenable); if (locked) - spin_unlock(&port->lock); - local_irq_restore(flags); + spin_unlock_irqrestore(&port->lock, flags); } static int asc_console_setup(struct console *co, char *options) -- cgit v1.2.3 From b5090cb46ee7580f848c2ecc4633ada306840328 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Mon, 27 Mar 2017 15:03:40 +0100 Subject: serial: st-asc: Change default baudrate from 9600 to 115200 9600 is old school. Most applications use 115200 as the default baud these days. Signed-off-by: Lee Jones Acked-by: Patrice Chotard Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/st-asc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/st-asc.c b/drivers/tty/serial/st-asc.c index 4889396d4c45..3e99bcc4eba0 100644 --- a/drivers/tty/serial/st-asc.c +++ b/drivers/tty/serial/st-asc.c @@ -916,7 +916,7 @@ static void asc_console_write(struct console *co, const char *s, unsigned count) static int asc_console_setup(struct console *co, char *options) { struct asc_port *ascport; - int baud = 9600; + int baud = 115200; int bits = 8; int parity = 'n'; int flow = 'n'; -- cgit v1.2.3 From e37f712f760478a3bce8a68b8d85b5b0bf6642eb Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 28 Mar 2017 11:13:44 +0200 Subject: serial: sh-sci: Fix hang in sci_reset() When the .set_termios() callback resets the UART, it first waits (busy loops) until all characters in the transmit FIFO have been transmitted, to prevent a port configuration change from impacting these characters. However, if the UART has dedicated RTS/CTS hardware flow control enabled, these characters may have been stuck in the FIFO due to CTS not being asserted by the remote side. - When a new user opens the port, .set_termios() is called while transmission is still disabled, leading to an infinite loop: NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! - When an active user changes port configuration without waiting for the draining of the transmit FIFO, this may also block indefinitely, until CTS is asserted by the remote side. This has been observed with SCIFA (on r8a7740/armadillo), and SCIFB and HSCIF (on r8a7791/koelsch). To fix this, remove the code that waits for the draining of the transmit FIFO. Signed-off-by: Geert Uytterhoeven Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/sh-sci.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 1df57461ece4..446a23bee140 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -2159,10 +2159,6 @@ static void sci_reset(struct uart_port *port) unsigned int status; struct sci_port *s = to_sci_port(port); - do { - status = serial_port_in(port, SCxSR); - } while (!(status & SCxSR_TEND(port))); - serial_port_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */ reg = sci_getreg(port, SCFCR); -- cgit v1.2.3 From 5f76895e4c712b1b5af450cf344389b8c53ac2c2 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 28 Mar 2017 11:13:45 +0200 Subject: serial: sh-sci: Fix late enablement of AUTORTS When changing hardware control flow for a UART with dedicated RTS/CTS pins, the new AUTORTS state is not immediately reflected in the hardware, but only when RTS is raised. However, the serial core does not call .set_mctrl() after .set_termios(), hence AUTORTS may only become effective when the port is closed, and reopened later. Note that this problem does not happen when manually using stty to change CRTSCTS, as AUTORTS will work fine on next open. To fix this, call .set_mctrl() from .set_termios() when dedicated RTS/CTS pins are present, to refresh the AUTORTS or RTS state. This is similar to what other drivers supporting AUTORTS do (e.g. omap-serial). Reported-by: Baumann, Christoph (C.) Fixes: 33f50ffc253854cf ("serial: sh-sci: Fix support for hardware-assisted RTS/CTS") Signed-off-by: Geert Uytterhoeven Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/sh-sci.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 446a23bee140..6e405fb5a23f 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -2372,6 +2372,10 @@ done: serial_port_out(port, SCFCR, ctrl); } + if (port->flags & UPF_HARD_FLOW) { + /* Refresh (Auto) RTS */ + sci_set_mctrl(port, port->mctrl); + } scr_val |= SCSCR_RE | SCSCR_TE | (s->cfg->scscr & ~(SCSCR_CKE1 | SCSCR_CKE0)); -- cgit v1.2.3 From cfa6eb239154315e6efcdda1d929e024097f927b Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 28 Mar 2017 11:13:46 +0200 Subject: serial: sh-sci: Fix (AUTO)RTS in sci_init_pins() If a UART has dedicated RTS/CTS pins, and hardware control flow is disabled (or AUTORTS is not yet effective), changing any serial port configuration deasserts RTS, as .set_termios() calls sci_init_pins(). To fix this, consider the current (AUTO)RTS state when (re)initializing the pins. Note that for SCIFA/SCIFB, AUTORTS needs explicit configuration of the RTS# pin function, while (H)SCIF handles this automatically. Fixes: d2b9775d795ec05f ("serial: sh-sci: Correct pin initialization on (H)SCIF") Fixes: e9d7a45a03991349 ("serial: sh-sci: Add pin initialization for SCIFA/SCIFB") Signed-off-by: Geert Uytterhoeven Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/sh-sci.c | 25 +++++++++++++++++++------ 1 file changed, 19 insertions(+), 6 deletions(-) diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 6e405fb5a23f..71707e8e6e3f 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -683,24 +683,37 @@ static void sci_init_pins(struct uart_port *port, unsigned int cflag) } if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { + u16 data = serial_port_in(port, SCPDR); u16 ctrl = serial_port_in(port, SCPCR); /* Enable RXD and TXD pin functions */ ctrl &= ~(SCPCR_RXDC | SCPCR_TXDC); if (to_sci_port(port)->has_rtscts) { - /* RTS# is output, driven 1 */ - ctrl |= SCPCR_RTSC; - serial_port_out(port, SCPDR, - serial_port_in(port, SCPDR) | SCPDR_RTSD); + /* RTS# is output, active low, unless autorts */ + if (!(port->mctrl & TIOCM_RTS)) { + ctrl |= SCPCR_RTSC; + data |= SCPDR_RTSD; + } else if (!s->autorts) { + ctrl |= SCPCR_RTSC; + data &= ~SCPDR_RTSD; + } else { + /* Enable RTS# pin function */ + ctrl &= ~SCPCR_RTSC; + } /* Enable CTS# pin function */ ctrl &= ~SCPCR_CTSC; } + serial_port_out(port, SCPDR, data); serial_port_out(port, SCPCR, ctrl); } else if (sci_getreg(port, SCSPTR)->size) { u16 status = serial_port_in(port, SCSPTR); - /* RTS# is output, driven 1 */ - status |= SCSPTR_RTSIO | SCSPTR_RTSDT; + /* RTS# is always output; and active low, unless autorts */ + status |= SCSPTR_RTSIO; + if (!(port->mctrl & TIOCM_RTS)) + status |= SCSPTR_RTSDT; + else if (!s->autorts) + status &= ~SCSPTR_RTSDT; /* CTS# and SCK are inputs */ status &= ~(SCSPTR_CTSIO | SCSPTR_SCKIO); serial_port_out(port, SCSPTR, status); -- cgit v1.2.3 From 2ed2b8621be2708c0f6d61fe9841e9ad8b9753f0 Mon Sep 17 00:00:00 2001 From: Samuel Thibault Date: Sun, 26 Mar 2017 22:47:36 +0200 Subject: braille-console: Fix value returned by _braille_console_setup commit bbeddf52adc1 ("printk: move braille console support into separate braille.[ch] files") introduced _braille_console_setup() to outline the braille initialization code. There was however some confusion over the value it was supposed to return. commit 2cfe6c4ac7ee ("printk: Fix return of braille_register_console()") tried to fix it but failed to. This fixes and documents the returned value according to the use in printk.c: non-zero return means a parsing error, and thus this console configuration should be ignored. Signed-off-by: Samuel Thibault Cc: Aleksey Makarov Cc: Joe Perches Cc: Ming Lei Cc: Steven Rostedt Acked-by: Petr Mladek Signed-off-by: Greg Kroah-Hartman --- kernel/printk/braille.c | 15 ++++++++------- kernel/printk/braille.h | 13 ++++++++++--- 2 files changed, 18 insertions(+), 10 deletions(-) diff --git a/kernel/printk/braille.c b/kernel/printk/braille.c index d5760c42f042..61d41ca41844 100644 --- a/kernel/printk/braille.c +++ b/kernel/printk/braille.c @@ -2,12 +2,13 @@ #include #include +#include #include #include "console_cmdline.h" #include "braille.h" -char *_braille_console_setup(char **str, char **brl_options) +int _braille_console_setup(char **str, char **brl_options) { if (!strncmp(*str, "brl,", 4)) { *brl_options = ""; @@ -15,14 +16,14 @@ char *_braille_console_setup(char **str, char **brl_options) } else if (!strncmp(*str, "brl=", 4)) { *brl_options = *str + 4; *str = strchr(*brl_options, ','); - if (!*str) + if (!*str) { pr_err("need port name after brl=\n"); - else - *((*str)++) = 0; - } else - return NULL; + return -EINVAL; + } + *((*str)++) = 0; + } - return *str; + return 0; } int diff --git a/kernel/printk/braille.h b/kernel/printk/braille.h index 769d771145c8..749a6756843a 100644 --- a/kernel/printk/braille.h +++ b/kernel/printk/braille.h @@ -9,7 +9,14 @@ braille_set_options(struct console_cmdline *c, char *brl_options) c->brl_options = brl_options; } -char * +/* + * Setup console according to braille options. + * Return -EINVAL on syntax error, 0 on success (or no braille option was + * actually given). + * Modifies str to point to the serial options + * Sets brl_options to the parsed braille options. + */ +int _braille_console_setup(char **str, char **brl_options); int @@ -25,10 +32,10 @@ braille_set_options(struct console_cmdline *c, char *brl_options) { } -static inline char * +static inline int _braille_console_setup(char **str, char **brl_options) { - return NULL; + return 0; } static inline int -- cgit v1.2.3 From 7cd3e9dbdd4c0025d0e37c8c73a2ac8641fc55bc Mon Sep 17 00:00:00 2001 From: Jan Kiszka Date: Thu, 23 Mar 2017 09:26:42 +0100 Subject: serial: 8250_lpss: Unconditionally set PCI master for Quark MSI needs it as well. Should have no practical impact, though, as DMA is always available on the Quark. But given the few users of pci_alloc_irq_vectors so far, this incorrect pattern may spread otherwise. Fixes: 3f3a46951e02 ("serial: 8250_lpss: set PCI master only for private DMA") Signed-off-by: Jan Kiszka Reviewed-by: Andy Shevchenko Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_lpss.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/tty/serial/8250/8250_lpss.c b/drivers/tty/serial/8250/8250_lpss.c index f3ea90f0e411..7dddd7e6a01c 100644 --- a/drivers/tty/serial/8250/8250_lpss.c +++ b/drivers/tty/serial/8250/8250_lpss.c @@ -183,7 +183,6 @@ static void qrk_serial_setup_dma(struct lpss8250 *lpss, struct uart_port *port) if (ret) return; - pci_set_master(pdev); pci_try_set_mwi(pdev); /* Special DMA address for UART */ @@ -216,6 +215,8 @@ static int qrk_serial_setup(struct lpss8250 *lpss, struct uart_port *port) struct pci_dev *pdev = to_pci_dev(port->dev); int ret; + pci_set_master(pdev); + ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES); if (ret < 0) return ret; -- cgit v1.2.3 From f7048b15900f36fe21398fba94777b8aab3b376d Mon Sep 17 00:00:00 2001 From: Vignesh R Date: Fri, 24 Mar 2017 10:57:59 +0530 Subject: tty: serial_core: Add name field to uart_port struct Introduce a field to store name of uart_port that can be used to easily identify UART port instances on a system that has more than one UART instance. The name is of the form ttyXN(eg. ttyS0, ttyAMA0,..) where N is number that particular UART instance. This field will be useful when printing debug info for a particular port or in register IRQs with unique IRQ name. Port name is populated during uart_add_one_port(). Signed-off-by: Vignesh R Reviewed-by: Andy Shevchenko Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/serial_core.c | 7 +++++++ include/linux/serial_core.h | 1 + 2 files changed, 8 insertions(+) diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 0fb3f7cce62a..f5572e28d16a 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -2744,6 +2744,12 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport) state->pm_state = UART_PM_STATE_UNDEFINED; uport->cons = drv->cons; uport->minor = drv->tty_driver->minor_start + uport->line; + uport->name = kasprintf(GFP_KERNEL, "%s%d", drv->dev_name, + drv->tty_driver->name_base + uport->line); + if (!uport->name) { + ret = -ENOMEM; + goto out; + } /* * If this port is a console, then the spinlock is already @@ -2861,6 +2867,7 @@ int uart_remove_one_port(struct uart_driver *drv, struct uart_port *uport) if (uport->type != PORT_UNKNOWN && uport->ops->release_port) uport->ops->release_port(uport); kfree(uport->tty_groups); + kfree(uport->name); /* * Indicate that there isn't a port here anymore. diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 58484fb35cc8..60530678c633 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -247,6 +247,7 @@ struct uart_port { unsigned char suspended; unsigned char irq_wake; unsigned char unused[2]; + char *name; /* port name */ struct attribute_group *attr_group; /* port specific attributes */ const struct attribute_group **tty_groups; /* all attributes (serial core use only) */ struct serial_rs485 rs485; -- cgit v1.2.3 From b2c663d155e1df81fa55287effac3b7115abc210 Mon Sep 17 00:00:00 2001 From: Vignesh R Date: Fri, 24 Mar 2017 10:58:00 +0530 Subject: serial: 8250: 8250_core: Fix irq name for 8250 serial IRQ Using dev_name() as IRQ name during request_irq() might be misleading in case of serial over PCI. Therefore identify serial port IRQ using uart_port's name field. This will help mapping IRQs to appropriate ttySN(where N is the serial port index) instances. Signed-off-by: Vignesh R Reviewed-by: Andy Shevchenko Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index f83b69f30987..48a07e2f617f 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -218,7 +218,7 @@ static int serial_link_irq_chain(struct uart_8250_port *up) spin_unlock_irq(&i->lock); irq_flags |= up->port.irqflags; ret = request_irq(up->port.irq, serial8250_interrupt, - irq_flags, dev_name(up->port.dev), i); + irq_flags, up->port.name, i); if (ret < 0) serial_do_unlink(i, up); } -- cgit v1.2.3 From a4199f5eb8096d63828f7333fa45650a7b0a99ed Mon Sep 17 00:00:00 2001 From: Tim Gardner Date: Wed, 22 Mar 2017 09:07:20 -0600 Subject: tty: Disable default console blanking interval BugLink: http://bugs.launchpad.net/bugs/869017 Console blanking is not enabling DPMS power saving (thereby negating any power-saving benefit), and is simply turning the screen content blank. This means that any crash output is invisible which is unhelpful on a server (virtual or otherwise). Furthermore, CRT burn in concerns should no longer govern the default case. Affected users could always set consoleblank on the kernel command line. Signed-off-by: Tim Gardner Cc: Greg Kroah-Hartman Cc: Jiri Slaby Cc: Adam Borowski Cc: Scot Doyle Signed-off-by: Greg Kroah-Hartman --- drivers/tty/vt/vt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index 5c4933bb4b53..9c9945284bcf 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -181,7 +181,7 @@ int console_blanked; static int vesa_blank_mode; /* 0:none 1:suspendV 2:suspendH 3:powerdown */ static int vesa_off_interval; -static int blankinterval = 10*60; +static int blankinterval; core_param(consoleblank, blankinterval, int, 0444); static DECLARE_WORK(console_work, console_callback); -- cgit v1.2.3 From 4d9d7d896d77e70e6868cfe681e7fcd58dc9526d Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Wed, 22 Mar 2017 13:50:13 +0100 Subject: serial: altera_uart: add earlycon support Nios2 currently uses its own early printk implementation, rather than using unified earlycon support to show boot messages on altera_uart. Add earlycon support to altera_uart so that other archs may use it. Also, this (together with the corresponding patch for altera_jtaguart) will allow the early printk implementation in arch/nios2 to be removed in a future patch. Cc: Ley Foon Tan Signed-off-by: Tobias Klauser Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/Kconfig | 1 + drivers/tty/serial/altera_uart.c | 32 ++++++++++++++++++++++++++++++++ 2 files changed, 33 insertions(+) diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 896f5eb78da0..5c8850f7a2a0 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1392,6 +1392,7 @@ config SERIAL_ALTERA_UART_CONSOLE bool "Altera UART console support" depends on SERIAL_ALTERA_UART=y select SERIAL_CORE_CONSOLE + select SERIAL_EARLYCON help Enable a Altera UART port to be the system console. diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c index 820a74208696..46d3438a0d27 100644 --- a/drivers/tty/serial/altera_uart.c +++ b/drivers/tty/serial/altera_uart.c @@ -489,6 +489,38 @@ console_initcall(altera_uart_console_init); #define ALTERA_UART_CONSOLE (&altera_uart_console) +static void altera_uart_earlycon_write(struct console *co, const char *s, + unsigned int count) +{ + struct earlycon_device *dev = co->data; + + uart_console_write(&dev->port, s, count, altera_uart_console_putc); +} + +static int __init altera_uart_earlycon_setup(struct earlycon_device *dev, + const char *options) +{ + struct uart_port *port = &dev->port; + + if (!port->membase) + return -ENODEV; + + /* Enable RX interrupts now */ + writel(ALTERA_UART_CONTROL_RRDY_MSK, + port->membase + ALTERA_UART_CONTROL_REG); + + if (dev->baud) { + unsigned int baudclk = port->uartclk / dev->baud; + + writel(baudclk, port->membase + ALTERA_UART_DIVISOR_REG); + } + + dev->con->write = altera_uart_earlycon_write; + return 0; +} + +OF_EARLYCON_DECLARE(uart, "altr,uart-1.0", altera_uart_earlycon_setup); + #else #define ALTERA_UART_CONSOLE NULL -- cgit v1.2.3 From abf1e0a98083fd0a1069ce68ad8c92bfb97a57db Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Fri, 24 Mar 2017 11:33:46 -0700 Subject: tty: serial: fsl_lpuart: lock port on console write The console write code is not entirely race free (e.g. the operations to disabling the UART interrupts are not atomic) hence locking is required. This has been become apparent with the PREEMPT RT patchset applied: With the fully preemptible kernel configuration the system often ended up in a freeze already at startup. Disable interrupts and lock using read_lock_irqsave. Try to lock in the sysrq/oops case, but don't bother if locking fails. Signed-off-by: Stefan Agner Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/fsl_lpuart.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index f02934ffb329..15df1ba78095 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -1705,6 +1705,13 @@ lpuart_console_write(struct console *co, const char *s, unsigned int count) { struct lpuart_port *sport = lpuart_ports[co->index]; unsigned char old_cr2, cr2; + unsigned long flags; + int locked = 1; + + if (sport->port.sysrq || oops_in_progress) + locked = spin_trylock_irqsave(&sport->port.lock, flags); + else + spin_lock_irqsave(&sport->port.lock, flags); /* first save CR2 and then disable interrupts */ cr2 = old_cr2 = readb(sport->port.membase + UARTCR2); @@ -1719,6 +1726,9 @@ lpuart_console_write(struct console *co, const char *s, unsigned int count) barrier(); writeb(old_cr2, sport->port.membase + UARTCR2); + + if (locked) + spin_unlock_irqrestore(&sport->port.lock, flags); } static void @@ -1726,6 +1736,13 @@ lpuart32_console_write(struct console *co, const char *s, unsigned int count) { struct lpuart_port *sport = lpuart_ports[co->index]; unsigned long old_cr, cr; + unsigned long flags; + int locked = 1; + + if (sport->port.sysrq || oops_in_progress) + locked = spin_trylock_irqsave(&sport->port.lock, flags); + else + spin_lock_irqsave(&sport->port.lock, flags); /* first save CR2 and then disable interrupts */ cr = old_cr = lpuart32_read(sport->port.membase + UARTCTRL); @@ -1740,6 +1757,9 @@ lpuart32_console_write(struct console *co, const char *s, unsigned int count) barrier(); lpuart32_write(old_cr, sport->port.membase + UARTCTRL); + + if (locked) + spin_unlock_irqrestore(&sport->port.lock, flags); } /* -- cgit v1.2.3 From 32680c53f734a2a3147b1191d7bb669c5f1c627c Mon Sep 17 00:00:00 2001 From: Chunyan Zhang Date: Mon, 27 Mar 2017 14:06:40 +0800 Subject: dt-bindings: arm: Add bindings for SP9860G Added bindings for Spreadtrum SP9860G board and SC9860 SoC. This patch also revised bindings of SC9836 to make the format more clear. Signed-off-by: Chunyan Zhang Acked-by: Rob Herring Signed-off-by: Greg Kroah-Hartman --- Documentation/devicetree/bindings/arm/sprd.txt | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/Documentation/devicetree/bindings/arm/sprd.txt b/Documentation/devicetree/bindings/arm/sprd.txt index 31a629dc75b8..3df034b13e28 100644 --- a/Documentation/devicetree/bindings/arm/sprd.txt +++ b/Documentation/devicetree/bindings/arm/sprd.txt @@ -1,11 +1,14 @@ Spreadtrum SoC Platforms Device Tree Bindings ---------------------------------------------------- -Sharkl64 is a Spreadtrum's SoC Platform which is based -on ARM 64-bit processor. +SC9836 openphone Board +Required root node properties: + - compatible = "sprd,sc9836-openphone", "sprd,sc9836"; -SC9836 openphone board with SC9836 SoC based on the -Sharkl64 Platform shall have the following properties. +SC9860 SoC +Required root node properties: + - compatible = "sprd,sc9860" +SP9860G 3GFHD Board Required root node properties: - - compatible = "sprd,sc9836-openphone", "sprd,sc9836"; + - compatible = "sprd,sp9860g-1h10", "sprd,sc9860"; -- cgit v1.2.3 From 26b82caae4722191edac5f7b13d172105f150926 Mon Sep 17 00:00:00 2001 From: Chunyan Zhang Date: Mon, 27 Mar 2017 14:06:41 +0800 Subject: dt-bindings: serial: add a new compatible string for SC9860 SC9860 use the same serial device which SC9836 uses, so added a new compatible string to support SC9860 as well, also added an example of how to describe this serial device in DT. Signed-off-by: Chunyan Zhang Acked-by: Rob Herring Signed-off-by: Greg Kroah-Hartman --- Documentation/devicetree/bindings/serial/sprd-uart.txt | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/serial/sprd-uart.txt b/Documentation/devicetree/bindings/serial/sprd-uart.txt index 2aff0f22c9fa..cab40f0f6f49 100644 --- a/Documentation/devicetree/bindings/serial/sprd-uart.txt +++ b/Documentation/devicetree/bindings/serial/sprd-uart.txt @@ -1,7 +1,19 @@ * Spreadtrum serial UART Required properties: -- compatible: must be "sprd,sc9836-uart" +- compatible: must be one of: + * "sprd,sc9836-uart" + * "sprd,sc9860-uart", "sprd,sc9836-uart" + - reg: offset and length of the register set for the device - interrupts: exactly one interrupt specifier - clocks: phandles to input clocks. + +Example: + uart0: serial@0 { + compatible = "sprd,sc9860-uart", + "sprd,sc9836-uart"; + reg = <0x0 0x100>; + interrupts = ; + clocks = <&ext_26m>; + }; -- cgit v1.2.3 From e1dc9b08051a2c2e694edf48d1e704f07c7c143c Mon Sep 17 00:00:00 2001 From: Wei Qiao Date: Mon, 27 Mar 2017 14:06:42 +0800 Subject: serial: sprd: adjust TIMEOUT to a big value SPRD_TIMEOUT was 256, which is too small to wait until the status switched to workable in a while loop, so that the earlycon could not work correctly. Signed-off-by: Wei Qiao Signed-off-by: Chunyan Zhang Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/sprd_serial.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/sprd_serial.c b/drivers/tty/serial/sprd_serial.c index d98e3dc4838e..90996ad97b37 100644 --- a/drivers/tty/serial/sprd_serial.c +++ b/drivers/tty/serial/sprd_serial.c @@ -36,7 +36,7 @@ #define SPRD_FIFO_SIZE 128 #define SPRD_DEF_RATE 26000000 #define SPRD_BAUD_IO_LIMIT 3000000 -#define SPRD_TIMEOUT 256 +#define SPRD_TIMEOUT 256000 /* the offset of serial registers and BITs for them */ /* data registers */ -- cgit v1.2.3 From 6fe729c4bdae41b4c5a5ff21312f021a48c69399 Mon Sep 17 00:00:00 2001 From: Andrey Smirnov Date: Tue, 4 Apr 2017 07:22:33 -0700 Subject: serdev: Add serdev_device_write subroutine Add serdev_device_write() a blocking call allowing to transfer arbitraty amount of data (potentially exceeding amount that serdev_device_write_buf can process in a single call) To support that, also add serdev_device_write_wakeup(). Drivers wanting to use full extent of serdev_device_write functionality are expected to provide serdev_device_write_wakeup() as a sole handler of .write_wakeup event or call it as a part of driver's custom .write_wakeup code. Because serdev_device_write() subroutine is a superset of serdev_device_write_buf() the patch re-impelements latter is terms of the former. For drivers wanting to just use serdev_device_write_buf() .write_wakeup handler is optional. Cc: cphealy@gmail.com Cc: Guenter Roeck Cc: linux-serial@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Rob Herring Reviewed-by: Andy Shevchenko Signed-off-by: Andrey Smirnov Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serdev/core.c | 36 +++++++++++++++++++++++++++++++----- include/linux/serdev.h | 17 +++++++++++++++-- 2 files changed, 46 insertions(+), 7 deletions(-) diff --git a/drivers/tty/serdev/core.c b/drivers/tty/serdev/core.c index f4c6c90add78..6701d1011fce 100644 --- a/drivers/tty/serdev/core.c +++ b/drivers/tty/serdev/core.c @@ -116,17 +116,41 @@ void serdev_device_close(struct serdev_device *serdev) } EXPORT_SYMBOL_GPL(serdev_device_close); -int serdev_device_write_buf(struct serdev_device *serdev, - const unsigned char *buf, size_t count) +void serdev_device_write_wakeup(struct serdev_device *serdev) +{ + complete(&serdev->write_comp); +} +EXPORT_SYMBOL_GPL(serdev_device_write_wakeup); + +int serdev_device_write(struct serdev_device *serdev, + const unsigned char *buf, size_t count, + unsigned long timeout) { struct serdev_controller *ctrl = serdev->ctrl; + int ret; - if (!ctrl || !ctrl->ops->write_buf) + if (!ctrl || !ctrl->ops->write_buf || + (timeout && !serdev->ops->write_wakeup)) return -EINVAL; - return ctrl->ops->write_buf(ctrl, buf, count); + mutex_lock(&serdev->write_lock); + do { + reinit_completion(&serdev->write_comp); + + ret = ctrl->ops->write_buf(ctrl, buf, count); + if (ret < 0) + break; + + buf += ret; + count -= ret; + + } while (count && + (timeout = wait_for_completion_timeout(&serdev->write_comp, + timeout))); + mutex_unlock(&serdev->write_lock); + return ret < 0 ? ret : (count ? -ETIMEDOUT : 0); } -EXPORT_SYMBOL_GPL(serdev_device_write_buf); +EXPORT_SYMBOL_GPL(serdev_device_write); void serdev_device_write_flush(struct serdev_device *serdev) { @@ -232,6 +256,8 @@ struct serdev_device *serdev_device_alloc(struct serdev_controller *ctrl) serdev->dev.parent = &ctrl->dev; serdev->dev.bus = &serdev_bus_type; serdev->dev.type = &serdev_device_type; + init_completion(&serdev->write_comp); + mutex_init(&serdev->write_lock); return serdev; } EXPORT_SYMBOL_GPL(serdev_device_alloc); diff --git a/include/linux/serdev.h b/include/linux/serdev.h index 5176cdc2057f..0beaff886992 100644 --- a/include/linux/serdev.h +++ b/include/linux/serdev.h @@ -39,12 +39,16 @@ struct serdev_device_ops { * @nr: Device number on serdev bus. * @ctrl: serdev controller managing this device. * @ops: Device operations. + * @write_comp Completion used by serdev_device_write() internally + * @write_lock Lock to serialize access when writing data */ struct serdev_device { struct device dev; int nr; struct serdev_controller *ctrl; const struct serdev_device_ops *ops; + struct completion write_comp; + struct mutex write_lock; }; static inline struct serdev_device *to_serdev_device(struct device *d) @@ -186,7 +190,8 @@ int serdev_device_open(struct serdev_device *); void serdev_device_close(struct serdev_device *); unsigned int serdev_device_set_baudrate(struct serdev_device *, unsigned int); void serdev_device_set_flow_control(struct serdev_device *, bool); -int serdev_device_write_buf(struct serdev_device *, const unsigned char *, size_t); +void serdev_device_write_wakeup(struct serdev_device *); +int serdev_device_write(struct serdev_device *, const unsigned char *, size_t, unsigned long); void serdev_device_write_flush(struct serdev_device *); int serdev_device_write_room(struct serdev_device *); @@ -223,7 +228,8 @@ static inline unsigned int serdev_device_set_baudrate(struct serdev_device *sdev return 0; } static inline void serdev_device_set_flow_control(struct serdev_device *sdev, bool enable) {} -static inline int serdev_device_write_buf(struct serdev_device *sdev, const unsigned char *buf, size_t count) +static inline int serdev_device_write(struct serdev_device *sdev, const unsigned char *buf, + size_t count, unsigned long timeout) { return -ENODEV; } @@ -259,4 +265,11 @@ static inline struct device *serdev_tty_port_register(struct tty_port *port, static inline void serdev_tty_port_unregister(struct tty_port *port) {} #endif /* CONFIG_SERIAL_DEV_CTRL_TTYPORT */ +static inline int serdev_device_write_buf(struct serdev_device *serdev, + const unsigned char *data, + size_t count) +{ + return serdev_device_write(serdev, data, count, 0); +} + #endif /*_LINUX_SERDEV_H */ -- cgit v1.2.3 From 2e94d5ae5da1d2e798045a53b5e234a42b090908 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Fri, 31 Mar 2017 21:35:17 +0300 Subject: serial: core: constify struct uart_port {name} field Don't allow modifications of port name. It's serial core's business only. Signed-off-by: Andy Shevchenko Signed-off-by: Greg Kroah-Hartman --- include/linux/serial_core.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 60530678c633..64d892f1e5cd 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -247,7 +247,7 @@ struct uart_port { unsigned char suspended; unsigned char irq_wake; unsigned char unused[2]; - char *name; /* port name */ + const char *name; /* port name */ struct attribute_group *attr_group; /* port specific attributes */ const struct attribute_group **tty_groups; /* all attributes (serial core use only) */ struct serial_rs485 rs485; -- cgit v1.2.3 From cade3580f79aeba0048d1dc4efd754786713c2c3 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Fri, 31 Mar 2017 21:35:18 +0300 Subject: serial: core: Re-use struct uart_port {name} field Since we have port name stored in struct uart_port, we better to use that one instead of open coding. This will make it one place source for easier maintenance or modifications. While here, replace printk(KERN_INFO ) by pr_info(). It seems last printk() call in serial_core.c. Signed-off-by: Andy Shevchenko Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/serial_core.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index f5572e28d16a..0f45b7884a2c 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -2117,9 +2117,8 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport) for (tries = 3; !ops->tx_empty(uport) && tries; tries--) msleep(10); if (!tries) - dev_err(uport->dev, "%s%d: Unable to drain transmitter\n", - drv->dev_name, - drv->tty_driver->name_base + uport->line); + dev_err(uport->dev, "%s: Unable to drain transmitter\n", + uport->name); ops->shutdown(uport); } @@ -2248,11 +2247,10 @@ uart_report_port(struct uart_driver *drv, struct uart_port *port) break; } - printk(KERN_INFO "%s%s%s%d at %s (irq = %d, base_baud = %d) is a %s\n", + pr_info("%s%s%s at %s (irq = %d, base_baud = %d) is a %s\n", port->dev ? dev_name(port->dev) : "", port->dev ? ": " : "", - drv->dev_name, - drv->tty_driver->name_base + port->line, + port->name, address, port->irq, port->uartclk / 16, uart_type(port)); } -- cgit v1.2.3 From ecfc5771ef0617d33a19a75643b7b3708895018e Mon Sep 17 00:00:00 2001 From: Shubhrajyoti Datta Date: Thu, 6 Apr 2017 12:27:41 +0530 Subject: serial: xuartps: Enable clocks in the pm disable case also When Power management is disabled then the clocks are not getting enabled. This patch enables it for the !PM case also. While at it also pm_runtime_set_active is called before calling pm_runtime_enable. Reported-by: Michal Simek Signed-off-by: Shubhrajyoti Datta Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/xilinx_uartps.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c index a83033774382..c0539950f8d7 100644 --- a/drivers/tty/serial/xilinx_uartps.c +++ b/drivers/tty/serial/xilinx_uartps.c @@ -1521,12 +1521,12 @@ static int cdns_uart_probe(struct platform_device *pdev) return PTR_ERR(cdns_uart_data->uartclk); } - rc = clk_prepare(cdns_uart_data->pclk); + rc = clk_prepare_enable(cdns_uart_data->pclk); if (rc) { dev_err(&pdev->dev, "Unable to enable pclk clock.\n"); return rc; } - rc = clk_prepare(cdns_uart_data->uartclk); + rc = clk_prepare_enable(cdns_uart_data->uartclk); if (rc) { dev_err(&pdev->dev, "Unable to enable device clock.\n"); goto err_out_clk_dis_pclk; @@ -1580,8 +1580,8 @@ static int cdns_uart_probe(struct platform_device *pdev) pm_runtime_use_autosuspend(&pdev->dev); pm_runtime_set_autosuspend_delay(&pdev->dev, UART_AUTOSUSPEND_TIMEOUT); - pm_runtime_enable(&pdev->dev); pm_runtime_set_active(&pdev->dev); + pm_runtime_enable(&pdev->dev); rc = uart_add_one_port(&cdns_uart_uart_driver, port); if (rc) { @@ -1601,9 +1601,9 @@ err_out_clk_disable: pm_runtime_disable(&pdev->dev); pm_runtime_set_suspended(&pdev->dev); pm_runtime_dont_use_autosuspend(&pdev->dev); - clk_unprepare(cdns_uart_data->uartclk); + clk_disable_unprepare(cdns_uart_data->uartclk); err_out_clk_dis_pclk: - clk_unprepare(cdns_uart_data->pclk); + clk_disable_unprepare(cdns_uart_data->pclk); return rc; } @@ -1627,8 +1627,8 @@ static int cdns_uart_remove(struct platform_device *pdev) #endif rc = uart_remove_one_port(&cdns_uart_uart_driver, port); port->mapbase = 0; - clk_unprepare(cdns_uart_data->uartclk); - clk_unprepare(cdns_uart_data->pclk); + clk_disable_unprepare(cdns_uart_data->uartclk); + clk_disable_unprepare(cdns_uart_data->pclk); pm_runtime_disable(&pdev->dev); pm_runtime_set_suspended(&pdev->dev); pm_runtime_dont_use_autosuspend(&pdev->dev); -- cgit v1.2.3 From 7d05587c9e0e4611650bb403812e2d492c178a9f Mon Sep 17 00:00:00 2001 From: Jayachandran C Date: Sat, 1 Apr 2017 19:42:09 +0000 Subject: tty: amba-pl011: Fix spurious TX interrupts On SMP systems, we see a lot of spurious TX interrupts when a program generates a steady stream of output to the pl011 UART. The problem can be easily seen when one CPU generates the output while another CPU handles the pl011 interrupts, and the rate of output is low enough not to fill the TX FIFO. The problem seems to be: -- CPU a -- -- CPU b -- (take port lock) pl011_start_tx pl011_start_tx_pio enable TXIM in REG_IMSC -> causes uart tx intr (pl011_int) pl011_tx_chars pl011_int ...tx chars, all done... (wait for port lock) pl011_stop_tx . disable TXIM . (release port lock) -> (take port lock) check for TXIM, not enabled (release port lock) return IRQ_NONE Enabling the TXIM in pl011_start_tx_pio() causes the interrupt to be generated and delivered to CPU b, even though pl011_tx_chars() is able to complete the TX and then disable the tx interrupt. Fix this by enabling TXIM only after pl011_tx_chars, if it is needed. pl011_tx_chars will return a boolean indicating whether the TX interrupts have to be enabled. Debugged-by: Vijaya Kumar Signed-off-by: Jayachandran C Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/amba-pl011.c | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-) diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index b0a377725d63..37257badcb97 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -1327,14 +1327,15 @@ static void pl011_stop_tx(struct uart_port *port) pl011_dma_tx_stop(uap); } -static void pl011_tx_chars(struct uart_amba_port *uap, bool from_irq); +static bool pl011_tx_chars(struct uart_amba_port *uap, bool from_irq); /* Start TX with programmed I/O only (no DMA) */ static void pl011_start_tx_pio(struct uart_amba_port *uap) { - uap->im |= UART011_TXIM; - pl011_write(uap->im, uap, REG_IMSC); - pl011_tx_chars(uap, false); + if (pl011_tx_chars(uap, false)) { + uap->im |= UART011_TXIM; + pl011_write(uap->im, uap, REG_IMSC); + } } static void pl011_start_tx(struct uart_port *port) @@ -1414,25 +1415,26 @@ static bool pl011_tx_char(struct uart_amba_port *uap, unsigned char c, return true; } -static void pl011_tx_chars(struct uart_amba_port *uap, bool from_irq) +/* Returns true if tx interrupts have to be (kept) enabled */ +static bool pl011_tx_chars(struct uart_amba_port *uap, bool from_irq) { struct circ_buf *xmit = &uap->port.state->xmit; int count = uap->fifosize >> 1; if (uap->port.x_char) { if (!pl011_tx_char(uap, uap->port.x_char, from_irq)) - return; + return true; uap->port.x_char = 0; --count; } if (uart_circ_empty(xmit) || uart_tx_stopped(&uap->port)) { pl011_stop_tx(&uap->port); - return; + return false; } /* If we are using DMA mode, try to send some characters. */ if (pl011_dma_tx_irq(uap)) - return; + return true; do { if (likely(from_irq) && count-- == 0) @@ -1447,8 +1449,11 @@ static void pl011_tx_chars(struct uart_amba_port *uap, bool from_irq) if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(&uap->port); - if (uart_circ_empty(xmit)) + if (uart_circ_empty(xmit)) { pl011_stop_tx(&uap->port); + return false; + } + return true; } static void pl011_modem_status(struct uart_amba_port *uap) -- cgit v1.2.3 From 87838ae3affaa96f2cfc8c1147973de42e116b80 Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Tue, 4 Apr 2017 05:56:32 -0300 Subject: tty: fix comment typo s/repsonsible/responsible/ Signed-off-by: Thadeu Lima de Souza Cascardo Signed-off-by: Greg Kroah-Hartman --- drivers/tty/tty_io.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index d697053f5e42..dd0c1aa60402 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -3381,7 +3381,7 @@ EXPORT_SYMBOL(tty_unregister_device); /** * __tty_alloc_driver -- allocate tty driver * @lines: count of lines this driver can handle at most - * @owner: module which is repsonsible for this driver + * @owner: module which is responsible for this driver * @flags: some of TTY_DRIVER_* flags, will be set in driver->flags * * This should not be called directly, some of the provided macros should be -- cgit v1.2.3 From e61c38d85b7392e033ee03bca46f1d6006156175 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Tue, 4 Apr 2017 11:18:51 +0200 Subject: serial: imx: setup DCEDTE early and ensure DCD and RI irqs to be off MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If the UART is operated in DTE mode and UCR3_DCD or UCR3_RI are 1 (which is the reset default) and the opposite side pulls the respective line to its active level the irq triggers after it is requested in .probe. These irqs were already disabled in .startup but this might be too late. Also setup of the UFCR_DCEDTE bit (currently done in .set_termios) is done very late which is critical as it also controls direction of some pins. So setup UFCR_DCEDTE earlier (in .probe) and also disable the broken irqs in DTE mode there before requesting irqs. Acked-by: Lucas Stach Signed-off-by: Uwe Kleine-König Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/imx.c | 36 +++++++++++++++++++++++------------- 1 file changed, 23 insertions(+), 13 deletions(-) diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index e3e152cbc75e..4167b61bf4e0 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -1317,19 +1317,10 @@ static int imx_startup(struct uart_port *port) if (!is_imx1_uart(sport)) { temp = readl(sport->port.membase + UCR3); - /* - * The effect of RI and DCD differs depending on the UFCR_DCEDTE - * bit. In DCE mode they control the outputs, in DTE mode they - * enable the respective irqs. At least the DCD irq cannot be - * cleared on i.MX25 at least, so it's not usable and must be - * disabled. I don't have test hardware to check if RI has the - * same problem but I consider this likely so it's disabled for - * now, too. - */ - temp |= IMX21_UCR3_RXDMUXSEL | UCR3_ADNIMP | - UCR3_DTRDEN | UCR3_RI | UCR3_DCD; + temp |= UCR3_DTRDEN | UCR3_RI | UCR3_DCD; if (sport->dte_mode) + /* disable broken interrupts */ temp &= ~(UCR3_RI | UCR3_DCD); writel(temp, sport->port.membase + UCR3); @@ -1584,8 +1575,6 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios, ufcr = readl(sport->port.membase + UFCR); ufcr = (ufcr & (~UFCR_RFDIV)) | UFCR_RFDIV_REG(div); - if (sport->dte_mode) - ufcr |= UFCR_DCEDTE; writel(ufcr, sport->port.membase + UFCR); writel(num, sport->port.membase + UBIR); @@ -2153,6 +2142,27 @@ static int serial_imx_probe(struct platform_device *pdev) UCR1_TXMPTYEN | UCR1_RTSDEN); writel_relaxed(reg, sport->port.membase + UCR1); + if (!is_imx1_uart(sport) && sport->dte_mode) { + /* + * The DCEDTE bit changes the direction of DSR, DCD, DTR and RI + * and influences if UCR3_RI and UCR3_DCD changes the level of RI + * and DCD (when they are outputs) or enables the respective + * irqs. So set this bit early, i.e. before requesting irqs. + */ + writel(UFCR_DCEDTE, sport->port.membase + UFCR); + + /* + * Disable UCR3_RI and UCR3_DCD irqs. They are also not + * enabled later because they cannot be cleared + * (confirmed on i.MX25) which makes them unusable. + */ + writel(IMX21_UCR3_RXDMUXSEL | UCR3_ADNIMP | UCR3_DSR, + sport->port.membase + UCR3); + + } else { + writel(0, sport->port.membase + UFCR); + } + clk_disable_unprepare(sport->clk_ipg); /* -- cgit v1.2.3 From 768d64f491a530062ddad50e016fb27125f8bd7c Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Mon, 3 Apr 2017 08:20:59 +0200 Subject: serial: samsung: Use right device for DMA-mapping calls Driver should provide its own struct device for all DMA-mapping calls instead of extracting device pointer from DMA engine channel. Although this is harmless from the driver operation perspective on ARM architecture, it is always good to use the DMA mapping API in a proper way. This patch fixes following DMA API debug warning: WARNING: CPU: 0 PID: 0 at lib/dma-debug.c:1241 check_sync+0x520/0x9f4 samsung-uart 12c20000.serial: DMA-API: device driver tries to sync DMA memory it has not allocated [device address=0x000000006df0f580] [size=64 bytes] Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.11.0-rc1-00137-g07ca963 #51 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [] (unwind_backtrace) from [] (show_stack+0x20/0x24) [] (show_stack) from [] (dump_stack+0x84/0xa0) [] (dump_stack) from [] (__warn+0x14c/0x180) [] (__warn) from [] (warn_slowpath_fmt+0x48/0x50) [] (warn_slowpath_fmt) from [] (check_sync+0x520/0x9f4) [] (check_sync) from [] (debug_dma_sync_single_for_device+0x88/0xc8) [] (debug_dma_sync_single_for_device) from [] (s3c24xx_serial_start_tx_dma+0x100/0x2f8) [] (s3c24xx_serial_start_tx_dma) from [] (s3c24xx_serial_tx_chars+0x198/0x33c) Reported-by: Seung-Woo Kim Fixes: 62c37eedb74c8 ("serial: samsung: add dma reqest/release functions") CC: stable@vger.kernel.org # v4.0+ Signed-off-by: Marek Szyprowski Reviewed-by: Bartlomiej Zolnierkiewicz Reviewed-by: Krzysztof Kozlowski Reviewed-by: Shuah Khan Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/samsung.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index 7a17aedbf902..9f3759bdb44f 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -901,14 +901,13 @@ static int s3c24xx_serial_request_dma(struct s3c24xx_uart_port *p) return -ENOMEM; } - dma->rx_addr = dma_map_single(dma->rx_chan->device->dev, dma->rx_buf, + dma->rx_addr = dma_map_single(p->port.dev, dma->rx_buf, dma->rx_size, DMA_FROM_DEVICE); spin_lock_irqsave(&p->port.lock, flags); /* TX buffer */ - dma->tx_addr = dma_map_single(dma->tx_chan->device->dev, - p->port.state->xmit.buf, + dma->tx_addr = dma_map_single(p->port.dev, p->port.state->xmit.buf, UART_XMIT_SIZE, DMA_TO_DEVICE); spin_unlock_irqrestore(&p->port.lock, flags); @@ -922,7 +921,7 @@ static void s3c24xx_serial_release_dma(struct s3c24xx_uart_port *p) if (dma->rx_chan) { dmaengine_terminate_all(dma->rx_chan); - dma_unmap_single(dma->rx_chan->device->dev, dma->rx_addr, + dma_unmap_single(p->port.dev, dma->rx_addr, dma->rx_size, DMA_FROM_DEVICE); kfree(dma->rx_buf); dma_release_channel(dma->rx_chan); @@ -931,7 +930,7 @@ static void s3c24xx_serial_release_dma(struct s3c24xx_uart_port *p) if (dma->tx_chan) { dmaengine_terminate_all(dma->tx_chan); - dma_unmap_single(dma->tx_chan->device->dev, dma->tx_addr, + dma_unmap_single(p->port.dev, dma->tx_addr, UART_XMIT_SIZE, DMA_TO_DEVICE); dma_release_channel(dma->tx_chan); dma->tx_chan = NULL; -- cgit v1.2.3 From 500fcc08a32bfd54f11951ba81530775df15c474 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Mon, 3 Apr 2017 08:21:00 +0200 Subject: serial: samsung: Add missing checks for dma_map_single failure This patch adds missing checks for dma_map_single() failure and proper error reporting. Although this issue was harmless on ARM architecture, it is always good to use the DMA mapping API in a proper way. This patch fixes the following DMA API debug warning: WARNING: CPU: 1 PID: 3785 at lib/dma-debug.c:1171 check_unmap+0x8a0/0xf28 dma-pl330 121a0000.pdma: DMA-API: device driver failed to check map error[device address=0x000000006e0f9000] [size=4096 bytes] [mapped as single] Modules linked in: CPU: 1 PID: 3785 Comm: (agetty) Tainted: G W 4.11.0-rc1-00137-g07ca963-dirty #59 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [] (unwind_backtrace) from [] (show_stack+0x20/0x24) [] (show_stack) from [] (dump_stack+0x84/0xa0) [] (dump_stack) from [] (__warn+0x14c/0x180) [] (__warn) from [] (warn_slowpath_fmt+0x48/0x50) [] (warn_slowpath_fmt) from [] (check_unmap+0x8a0/0xf28) [] (check_unmap) from [] (debug_dma_unmap_page+0x98/0xc8) [] (debug_dma_unmap_page) from [] (s3c24xx_serial_shutdown+0x314/0x52c) [] (s3c24xx_serial_shutdown) from [] (uart_port_shutdown+0x54/0x88) [] (uart_port_shutdown) from [] (uart_shutdown+0xd4/0x110) [] (uart_shutdown) from [] (uart_hangup+0x9c/0x208) [] (uart_hangup) from [] (__tty_hangup+0x49c/0x634) [] (__tty_hangup) from [] (tty_ioctl+0xc88/0x16e4) [] (tty_ioctl) from [] (do_vfs_ioctl+0xc4/0xd10) [] (do_vfs_ioctl) from [] (SyS_ioctl+0x7c/0x8c) [] (SyS_ioctl) from [] (ret_fast_syscall+0x0/0x3c) Reported-by: Seung-Woo Kim Fixes: 62c37eedb74c8 ("serial: samsung: add dma reqest/release functions") CC: stable@vger.kernel.org # v4.10+ Signed-off-by: Marek Szyprowski Reviewed-by: Bartlomiej Zolnierkiewicz Reviewed-by: Shuah Khan Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/samsung.c | 31 ++++++++++++++++++++++++------- 1 file changed, 24 insertions(+), 7 deletions(-) diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index 9f3759bdb44f..ca0bcd7fd61f 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -859,7 +859,7 @@ static void s3c24xx_serial_break_ctl(struct uart_port *port, int break_state) static int s3c24xx_serial_request_dma(struct s3c24xx_uart_port *p) { struct s3c24xx_uart_dma *dma = p->dma; - unsigned long flags; + int ret; /* Default slave configuration parameters */ dma->rx_conf.direction = DMA_DEV_TO_MEM; @@ -884,8 +884,8 @@ static int s3c24xx_serial_request_dma(struct s3c24xx_uart_port *p) dma->tx_chan = dma_request_chan(p->port.dev, "tx"); if (IS_ERR(dma->tx_chan)) { - dma_release_channel(dma->rx_chan); - return PTR_ERR(dma->tx_chan); + ret = PTR_ERR(dma->tx_chan); + goto err_release_rx; } dmaengine_slave_config(dma->tx_chan, &dma->tx_conf); @@ -894,15 +894,17 @@ static int s3c24xx_serial_request_dma(struct s3c24xx_uart_port *p) dma->rx_size = PAGE_SIZE; dma->rx_buf = kmalloc(dma->rx_size, GFP_KERNEL); - if (!dma->rx_buf) { - dma_release_channel(dma->rx_chan); - dma_release_channel(dma->tx_chan); - return -ENOMEM; + ret = -ENOMEM; + goto err_release_tx; } dma->rx_addr = dma_map_single(p->port.dev, dma->rx_buf, dma->rx_size, DMA_FROM_DEVICE); + if (dma_mapping_error(p->port.dev, dma->rx_addr)) { + ret = -EIO; + goto err_free_rx; + } spin_lock_irqsave(&p->port.lock, flags); @@ -911,8 +913,23 @@ static int s3c24xx_serial_request_dma(struct s3c24xx_uart_port *p) UART_XMIT_SIZE, DMA_TO_DEVICE); spin_unlock_irqrestore(&p->port.lock, flags); + if (dma_mapping_error(p->port.dev, dma->tx_addr)) { + ret = -EIO; + goto err_unmap_rx; + } return 0; + +err_unmap_rx: + dma_unmap_single(p->port.dev, dma->rx_addr, dma->rx_size, + DMA_FROM_DEVICE); +err_free_rx: + kfree(dma->rx_buf); +err_release_tx: + dma_release_channel(dma->tx_chan); +err_release_rx: + dma_release_channel(dma->rx_chan); + return ret; } static void s3c24xx_serial_release_dma(struct s3c24xx_uart_port *p) -- cgit v1.2.3 From 469f813ffe1ab74a9115dbd06ea3026e50ea6a54 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Mon, 3 Apr 2017 08:21:01 +0200 Subject: serial: samsung: Remove useless spinlock Spinlock taken only for dma_map_single() for TX buffer is completely useless and doesn't protect anything, so remove it to simplify the code. Signed-off-by: Marek Szyprowski Reviewed-by: Krzysztof Kozlowski Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/samsung.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index ca0bcd7fd61f..8aca18c4cdea 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -906,13 +906,9 @@ static int s3c24xx_serial_request_dma(struct s3c24xx_uart_port *p) goto err_free_rx; } - spin_lock_irqsave(&p->port.lock, flags); - /* TX buffer */ dma->tx_addr = dma_map_single(p->port.dev, p->port.state->xmit.buf, UART_XMIT_SIZE, DMA_TO_DEVICE); - - spin_unlock_irqrestore(&p->port.lock, flags); if (dma_mapping_error(p->port.dev, dma->tx_addr)) { ret = -EIO; goto err_unmap_rx; -- cgit v1.2.3 From 1b775de9707533299c152ffa4535de5ca25150a2 Mon Sep 17 00:00:00 2001 From: Sebastian Reichel Date: Tue, 28 Mar 2017 17:59:30 +0200 Subject: tty: serial: omap: add UPF_BOOT_AUTOCONF flag for DT init The UPF_BOOT_AUTOCONF flag is needed for proper flow control support. Acked-by: Pavel Machek Signed-off-by: Sebastian Reichel Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/omap-serial.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 6c6f82ad8d5c..a4734649a0f0 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -1597,6 +1597,9 @@ static struct omap_uart_port_info *of_get_uart_port_info(struct device *dev) of_property_read_u32(dev->of_node, "clock-frequency", &omap_up_info->uartclk); + + omap_up_info->flags = UPF_BOOT_AUTOCONF; + return omap_up_info; } -- cgit v1.2.3 From 099bd73dc17ed77aa8c98323e043613b6e8f54fc Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 10 Apr 2017 11:21:38 +0200 Subject: serial: omap: fix runtime-pm handling on unbind An unbalanced and misplaced synchronous put was used to suspend the device on driver unbind, something which with a likewise misplaced pm_runtime_disable leads to external aborts when an open port is being removed. Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa024010 ... [] (serial_omap_set_mctrl) from [] (uart_update_mctrl+0x50/0x60) [] (uart_update_mctrl) from [] (uart_shutdown+0xbc/0x138) [] (uart_shutdown) from [] (uart_hangup+0x94/0x190) [] (uart_hangup) from [] (__tty_hangup+0x404/0x41c) [] (__tty_hangup) from [] (tty_vhangup+0x1c/0x20) [] (tty_vhangup) from [] (uart_remove_one_port+0xec/0x260) [] (uart_remove_one_port) from [] (serial_omap_remove+0x40/0x60) [] (serial_omap_remove) from [] (platform_drv_remove+0x34/0x4c) Fix this up by resuming the device before deregistering the port and by suspending and disabling runtime pm only after the port has been removed. Also make sure to disable autosuspend before disabling runtime pm so that the usage count is balanced and device actually suspended before returning. Note that due to a negative autosuspend delay being set in probe, the unbalanced put would actually suspend the device on first driver unbind, while rebinding and again unbinding would result in a negative power.usage_count. Fixes: 7e9c8e7dbf3b ("serial: omap: make sure to suspend device before remove") Cc: Felipe Balbi Cc: Santosh Shilimkar Signed-off-by: Johan Hovold Acked-by: Tony Lindgren Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/omap-serial.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index a4734649a0f0..50f2c5a5e450 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -1783,9 +1783,13 @@ static int serial_omap_remove(struct platform_device *dev) { struct uart_omap_port *up = platform_get_drvdata(dev); + pm_runtime_get_sync(up->dev); + + uart_remove_one_port(&serial_omap_reg, &up->port); + + pm_runtime_dont_use_autosuspend(up->dev); pm_runtime_put_sync(up->dev); pm_runtime_disable(up->dev); - uart_remove_one_port(&serial_omap_reg, &up->port); pm_qos_remove_request(&up->pm_qos_request); device_init_wakeup(&dev->dev, false); -- cgit v1.2.3 From 77e6fe7fd2b7cba0bf2f2dc8cde51d7b9a35bf74 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 10 Apr 2017 11:21:39 +0200 Subject: serial: omap: suspend device on probe errors Make sure to actually suspend the device before returning after a failed (or deferred) probe. Note that autosuspend must be disabled before runtime pm is disabled in order to balance the usage count due to a negative autosuspend delay as well as to make the final put suspend the device synchronously. Fixes: 388bc2622680 ("omap-serial: Fix the error handling in the omap_serial probe") Cc: Shubhrajyoti D Signed-off-by: Johan Hovold Acked-by: Tony Lindgren Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/omap-serial.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 50f2c5a5e450..1ea05ac57aa7 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -1770,7 +1770,8 @@ static int serial_omap_probe(struct platform_device *pdev) return 0; err_add_port: - pm_runtime_put(&pdev->dev); + pm_runtime_dont_use_autosuspend(&pdev->dev); + pm_runtime_put_sync(&pdev->dev); pm_runtime_disable(&pdev->dev); pm_qos_remove_request(&up->pm_qos_request); device_init_wakeup(up->dev, false); -- cgit v1.2.3 From 18a4208826dd0a13eb06de724c86bba2c225f943 Mon Sep 17 00:00:00 2001 From: Peter Senna Tschudin Date: Fri, 7 Apr 2017 11:45:24 +0200 Subject: imx-serial: Reduce RX DMA startup latency when opening for reading Reduce RX DMA start latency for the first reception when port is opened for reading. Instead of waiting for an interrupt signaling data on RX FIFO or data too old on RX FIFO, start RX DMA immediately when the serial port is opened for reading. Before this patch, the average RX DMA latency for the first reception was 42489 microseconds with a standard deviation of 25721 microseconds in 36 samples. After the patch the average RX DMA latency for the first reception, when the serial port is opened for reading, is 653 microseconds with a standard deviation of 294 microseconds in 36 samples. Signed-off-by: Peter Senna Tschudin Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/imx.c | 63 +++++++++++++++++++++++++++++++++++++----------- 1 file changed, 49 insertions(+), 14 deletions(-) diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 4167b61bf4e0..33509b4beaec 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -719,6 +719,27 @@ out: return IRQ_HANDLED; } +static void imx_disable_rx_int(struct imx_port *sport) +{ + unsigned long temp; + + sport->dma_is_rxing = 1; + + /* disable the receiver ready and aging timer interrupts */ + temp = readl(sport->port.membase + UCR1); + temp &= ~(UCR1_RRDYEN); + writel(temp, sport->port.membase + UCR1); + + temp = readl(sport->port.membase + UCR2); + temp &= ~(UCR2_ATEN); + writel(temp, sport->port.membase + UCR2); + + /* disable the rx errors interrupts */ + temp = readl(sport->port.membase + UCR4); + temp &= ~UCR4_OREN; + writel(temp, sport->port.membase + UCR4); +} + static void clear_rx_errors(struct imx_port *sport); static int start_rx_dma(struct imx_port *sport); /* @@ -734,21 +755,8 @@ static void imx_dma_rxint(struct imx_port *sport) temp = readl(sport->port.membase + USR2); if ((temp & USR2_RDR) && !sport->dma_is_rxing) { - sport->dma_is_rxing = 1; - /* disable the receiver ready and aging timer interrupts */ - temp = readl(sport->port.membase + UCR1); - temp &= ~(UCR1_RRDYEN); - writel(temp, sport->port.membase + UCR1); - - temp = readl(sport->port.membase + UCR2); - temp &= ~(UCR2_ATEN); - writel(temp, sport->port.membase + UCR2); - - /* disable the rx errors interrupts */ - temp = readl(sport->port.membase + UCR4); - temp &= ~UCR4_OREN; - writel(temp, sport->port.membase + UCR4); + imx_disable_rx_int(sport); /* tell the DMA to receive the data. */ start_rx_dma(sport); @@ -1330,6 +1338,33 @@ static int imx_startup(struct uart_port *port) * Enable modem status interrupts */ imx_enable_ms(&sport->port); + + /* + * If the serial port is opened for reading start RX DMA immediately + * instead of waiting for RX FIFO interrupts. In our iMX53 the average + * delay for the first reception dropped from approximately 35000 + * microseconds to 1000 microseconds. + */ + if (sport->dma_is_enabled) { + struct tty_struct *tty = sport->port.state->port.tty; + struct tty_file_private *file_priv; + int readcnt = 0; + + spin_lock(&tty->files_lock); + + if (!list_empty(&tty->tty_files)) + list_for_each_entry(file_priv, &tty->tty_files, list) + if (!(file_priv->file->f_flags & O_WRONLY)) + readcnt++; + + spin_unlock(&tty->files_lock); + + if (readcnt > 0) { + imx_disable_rx_int(sport); + start_rx_dma(sport); + } + } + spin_unlock_irqrestore(&sport->port.lock, flags); return 0; -- cgit v1.2.3 From 7d6d44aee0aed24f243a37ec525a4fcb40e6e2d4 Mon Sep 17 00:00:00 2001 From: Adam Borowski Date: Mon, 27 Mar 2017 14:21:13 +0200 Subject: vt: set mouse selection word-chars to gpm's default Since forever, gpm was this code's only user, and it overrides the table on start so the default was never seen -- until Bill Allombert's "consolation" came in. The in-kernel set is "A-Za-z0-9_" which fails to catch typical file names, etc. Let's change this to gpm's conservative default, ie "-A-Za-z0-9_./"; most terminals include more, for example xfce4-terminal has "-A-Za-z0-9,./?%&#:_=+@~". There's some discussion at https://bugs.debian.org/846587 Signed-off-by: Adam Borowski Signed-off-by: Greg Kroah-Hartman --- drivers/tty/vt/selection.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/vt/selection.c b/drivers/tty/vt/selection.c index 36e1b8c7680f..2252e11d8347 100644 --- a/drivers/tty/vt/selection.c +++ b/drivers/tty/vt/selection.c @@ -84,7 +84,7 @@ void clear_selection(void) */ static u32 inwordLut[8]={ 0x00000000, /* control chars */ - 0x03FF0000, /* digits */ + 0x03FFE000, /* digits and "-./" */ 0x87FFFFFE, /* uppercase and '_' */ 0x07FFFFFE, /* lowercase */ 0x00000000, -- cgit v1.2.3 From 7f1534e172f5eb9c215a25d73ee9ef57eb1582ba Mon Sep 17 00:00:00 2001 From: Adam Borowski Date: Mon, 27 Mar 2017 14:21:14 +0200 Subject: vt: make mouse selection of non-ASCII consistent MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit For some reason a handful of ISO-8859-1 symbols are excluded from "word chars" while the vast majority of Unicode is hard-coded as included, even when inappropriate (we really would want to _not_ select line-drawing/etc). Those symbols are: ¡¢£¤¥¦§¨©ª«¬®¯°±²³´µ¶·¸¹º»¼½¾¿×÷ Thus, let's not special-case any non-ASCII anymore. Attempts to set these via ioctl will be silently ignored. As an extra bonus, we debloat the kernel by 128 bytes. Signed-off-by: Adam Borowski Signed-off-by: Greg Kroah-Hartman --- drivers/tty/vt/selection.c | 16 ++++++---------- 1 file changed, 6 insertions(+), 10 deletions(-) diff --git a/drivers/tty/vt/selection.c b/drivers/tty/vt/selection.c index 2252e11d8347..accbd1257bc4 100644 --- a/drivers/tty/vt/selection.c +++ b/drivers/tty/vt/selection.c @@ -80,21 +80,17 @@ void clear_selection(void) /* * User settable table: what characters are to be considered alphabetic? - * 256 bits. Locked by the console lock. + * 128 bits. Locked by the console lock. */ -static u32 inwordLut[8]={ +static u32 inwordLut[]={ 0x00000000, /* control chars */ 0x03FFE000, /* digits and "-./" */ 0x87FFFFFE, /* uppercase and '_' */ 0x07FFFFFE, /* lowercase */ - 0x00000000, - 0x00000000, - 0xFF7FFFFF, /* latin-1 accented letters, not multiplication sign */ - 0xFF7FFFFF /* latin-1 accented letters, not division sign */ }; static inline int inword(const u16 c) { - return c > 0xff || (( inwordLut[c>>5] >> (c & 0x1F) ) & 1); + return c > 0x7f || (( inwordLut[c>>5] >> (c & 0x1F) ) & 1); } /** @@ -106,10 +102,10 @@ static inline int inword(const u16 c) { */ int sel_loadlut(char __user *p) { - u32 tmplut[8]; - if (copy_from_user(tmplut, (u32 __user *)(p+4), 32)) + u32 tmplut[ARRAY_SIZE(inwordLut)]; + if (copy_from_user(tmplut, (u32 __user *)(p+4), sizeof(inwordLut))) return -EFAULT; - memcpy(inwordLut, tmplut, 32); + memcpy(inwordLut, tmplut, sizeof(inwordLut)); return 0; } -- cgit v1.2.3 From 5a0722b898f851b9ef108ea7babc529e4efc773d Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Thu, 13 Apr 2017 08:55:08 -0500 Subject: tty: pl011: use "qdf2400_e44" as the earlycon name for QDF2400 E44 Define a new early console name for Qualcomm Datacenter Technologies QDF2400 SOCs affected by erratum 44, instead of piggy-backing on "pl011". Previously, to enable traditional (non-SPCR) earlycon, the documentation said to specify "earlycon=pl011,
,qdf2400_e44", but the code was broken and this didn't actually work. So instead, the method for specifying the E44 work-around with traditional earlycon is "earlycon=qdf2400_e44,
". Both methods of earlycon are now enabled with the same function. Fixes: e53e597fd4c4 ("tty: pl011: fix earlycon work-around for QDF2400 erratum 44") Signed-off-by: Timur Tabi Cc: stable # 4.11 Tested-by: Shanker Donthineni Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/amba-pl011.c | 31 +++++++++++++++++++++++-------- 1 file changed, 23 insertions(+), 8 deletions(-) diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 37257badcb97..8a857bb34fbb 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -2475,19 +2475,34 @@ static int __init pl011_early_console_setup(struct earlycon_device *device, if (!device->port.membase) return -ENODEV; - /* On QDF2400 SOCs affected by Erratum 44, the "qdf2400_e44" must - * also be specified, e.g. "earlycon=pl011,
,qdf2400_e44". - */ - if (!strcmp(device->options, "qdf2400_e44")) - device->con->write = qdf2400_e44_early_write; - else - device->con->write = pl011_early_write; + device->con->write = pl011_early_write; return 0; } OF_EARLYCON_DECLARE(pl011, "arm,pl011", pl011_early_console_setup); OF_EARLYCON_DECLARE(pl011, "arm,sbsa-uart", pl011_early_console_setup); -EARLYCON_DECLARE(qdf2400_e44, pl011_early_console_setup); + +/* + * On Qualcomm Datacenter Technologies QDF2400 SOCs affected by + * Erratum 44, traditional earlycon can be enabled by specifying + * "earlycon=qdf2400_e44,
". Any options are ignored. + * + * Alternatively, you can just specify "earlycon", and the early console + * will be enabled with the information from the SPCR table. In this + * case, the SPCR code will detect the need for the E44 work-around, + * and set the console name to "qdf2400_e44". + */ +static int __init +qdf2400_e44_early_console_setup(struct earlycon_device *device, + const char *opt) +{ + if (!device->port.membase) + return -ENODEV; + + device->con->write = qdf2400_e44_early_write; + return 0; +} +EARLYCON_DECLARE(qdf2400_e44, qdf2400_e44_early_console_setup); #else #define AMBA_CONSOLE NULL -- cgit v1.2.3 From 72f1b85a045e3db4d21e9531bdc605157fa224a7 Mon Sep 17 00:00:00 2001 From: Marc Gonzalez Date: Mon, 10 Apr 2017 11:47:09 +0200 Subject: serial: 8250_early: Add earlycon support for Palmchip UART Define an OF early console for Palmchip UART, which can be enabled by passing "earlycon" on the boot command line. Signed-off-by: Marc Gonzalez Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_early.c | 24 ++++++++++++++++++++++++ drivers/tty/serial/8250/8250_port.c | 4 ++-- 2 files changed, 26 insertions(+), 2 deletions(-) diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c index 85a12f032402..82fc48eca1df 100644 --- a/drivers/tty/serial/8250/8250_early.c +++ b/drivers/tty/serial/8250/8250_early.c @@ -39,6 +39,7 @@ static unsigned int __init serial8250_early_in(struct uart_port *port, int offset) { + int reg_offset = offset; offset <<= port->regshift; switch (port->iotype) { @@ -52,6 +53,8 @@ static unsigned int __init serial8250_early_in(struct uart_port *port, int offse return ioread32be(port->membase + offset); case UPIO_PORT: return inb(port->iobase + offset); + case UPIO_AU: + return port->serial_in(port, reg_offset); default: return 0; } @@ -59,6 +62,7 @@ static unsigned int __init serial8250_early_in(struct uart_port *port, int offse static void __init serial8250_early_out(struct uart_port *port, int offset, int value) { + int reg_offset = offset; offset <<= port->regshift; switch (port->iotype) { @@ -77,6 +81,9 @@ static void __init serial8250_early_out(struct uart_port *port, int offset, int case UPIO_PORT: outb(value, port->iobase + offset); break; + case UPIO_AU: + port->serial_out(port, reg_offset, value); + break; } } @@ -172,3 +179,20 @@ OF_EARLYCON_DECLARE(omap8250, "ti,omap3-uart", early_omap8250_setup); OF_EARLYCON_DECLARE(omap8250, "ti,omap4-uart", early_omap8250_setup); #endif + +#ifdef CONFIG_SERIAL_8250_RT288X + +unsigned int au_serial_in(struct uart_port *p, int offset); +void au_serial_out(struct uart_port *p, int offset, int value); + +static int __init early_au_setup(struct earlycon_device *dev, const char *opt) +{ + dev->port.serial_in = au_serial_in; + dev->port.serial_out = au_serial_out; + dev->port.iotype = UPIO_AU; + dev->con->write = early_serial8250_write; + return 0; +} +OF_EARLYCON_DECLARE(palmchip, "ralink,rt2880-uart", early_au_setup); + +#endif diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 6119516ef5fc..09a65a3ec7f7 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -328,7 +328,7 @@ static const s8 au_io_out_map[8] = { -1, /* UART_SCR (unmapped) */ }; -static unsigned int au_serial_in(struct uart_port *p, int offset) +unsigned int au_serial_in(struct uart_port *p, int offset) { if (offset >= ARRAY_SIZE(au_io_in_map)) return UINT_MAX; @@ -338,7 +338,7 @@ static unsigned int au_serial_in(struct uart_port *p, int offset) return __raw_readl(p->membase + (offset << p->regshift)); } -static void au_serial_out(struct uart_port *p, int offset, int value) +void au_serial_out(struct uart_port *p, int offset, int value) { if (offset >= ARRAY_SIZE(au_io_out_map)) return; -- cgit v1.2.3 From 0c688614dcce84dfdbb305fd1c399c06cecea745 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Wed, 12 Apr 2017 18:37:14 -0400 Subject: console: move console_init() out of tty_io.c All the console driver handling code lives in printk.c. Move console_init() there as well so console support can still be used when the TTY code is configured out. No logical changes from this patch. Signed-off-by: Nicolas Pitre Signed-off-by: Greg Kroah-Hartman --- drivers/tty/tty_io.c | 24 ------------------------ include/linux/console.h | 2 ++ include/linux/tty.h | 7 ++++--- init/main.c | 2 +- kernel/printk/printk.c | 24 ++++++++++++++++++++++++ 5 files changed, 31 insertions(+), 28 deletions(-) diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index dd0c1aa60402..8244b6199784 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -3584,30 +3584,6 @@ void tty_default_fops(struct file_operations *fops) *fops = tty_fops; } -/* - * Initialize the console device. This is called *early*, so - * we can't necessarily depend on lots of kernel help here. - * Just do some early initializations, and do the complex setup - * later. - */ -void __init console_init(void) -{ - initcall_t *call; - - /* Setup the default TTY line discipline. */ - n_tty_init(); - - /* - * set up the console device so that later boot sequences can - * inform about problems etc.. - */ - call = __con_initcall_start; - while (call < __con_initcall_end) { - (*call)(); - call++; - } -} - static char *tty_devnode(struct device *dev, umode_t *mode) { if (!mode) diff --git a/include/linux/console.h b/include/linux/console.h index 5949d1855589..b8920a031a3e 100644 --- a/include/linux/console.h +++ b/include/linux/console.h @@ -212,4 +212,6 @@ extern bool vgacon_text_force(void); static inline bool vgacon_text_force(void) { return false; } #endif +extern void console_init(void); + #endif /* _LINUX_CONSOLE_H */ diff --git a/include/linux/tty.h b/include/linux/tty.h index 1017e904c0a3..f1106d7c73b6 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -390,7 +390,6 @@ static inline bool tty_throttled(struct tty_struct *tty) } #ifdef CONFIG_TTY -extern void console_init(void); extern void tty_kref_put(struct tty_struct *tty); extern struct pid *tty_get_pgrp(struct tty_struct *tty); extern void tty_vhangup_self(void); @@ -402,8 +401,6 @@ extern struct tty_struct *get_current_tty(void); extern int __init tty_init(void); extern const char *tty_name(const struct tty_struct *tty); #else -static inline void console_init(void) -{ } static inline void tty_kref_put(struct tty_struct *tty) { } static inline struct pid *tty_get_pgrp(struct tty_struct *tty) @@ -669,7 +666,11 @@ extern int tty_ldisc_receive_buf(struct tty_ldisc *ld, const unsigned char *p, /* n_tty.c */ extern void n_tty_inherit_ops(struct tty_ldisc_ops *ops); +#ifdef CONFIG_TTY extern void __init n_tty_init(void); +#else +static inline void n_tty_init(void) { } +#endif /* tty_audit.c */ #ifdef CONFIG_AUDIT diff --git a/init/main.c b/init/main.c index b0c11cbf5ddf..cfb7e6821b85 100644 --- a/init/main.c +++ b/init/main.c @@ -27,7 +27,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c index 2984fb0f0257..3a0940652660 100644 --- a/kernel/printk/printk.c +++ b/kernel/printk/printk.c @@ -2610,6 +2610,30 @@ int unregister_console(struct console *console) } EXPORT_SYMBOL(unregister_console); +/* + * Initialize the console device. This is called *early*, so + * we can't necessarily depend on lots of kernel help here. + * Just do some early initializations, and do the complex setup + * later. + */ +void __init console_init(void) +{ + initcall_t *call; + + /* Setup the default TTY line discipline. */ + n_tty_init(); + + /* + * set up the console device so that later boot sequences can + * inform about problems etc.. + */ + call = __con_initcall_start; + while (call < __con_initcall_end) { + (*call)(); + call++; + } +} + /* * Some boot consoles access data that is in the init section and which will * be discarded after the initcalls have been run. To make sure that no code -- cgit v1.2.3 From fff0a2ca3a061c230b0e905e7586267a517538ac Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Wed, 12 Apr 2017 18:37:15 -0400 Subject: tty: move baudrate handling code to a file of its own To allow reuse without the rest of the tty_ioctl code. No logical changes from this patch. Signed-off-by: Nicolas Pitre Signed-off-by: Greg Kroah-Hartman --- drivers/tty/Makefile | 3 +- drivers/tty/tty_baudrate.c | 232 +++++++++++++++++++++++++++++++++++++++++++++ drivers/tty/tty_ioctl.c | 222 ------------------------------------------- 3 files changed, 234 insertions(+), 223 deletions(-) create mode 100644 drivers/tty/tty_baudrate.c diff --git a/drivers/tty/Makefile b/drivers/tty/Makefile index b95bed92da9f..6983b5a49ec3 100644 --- a/drivers/tty/Makefile +++ b/drivers/tty/Makefile @@ -1,5 +1,6 @@ obj-$(CONFIG_TTY) += tty_io.o n_tty.o tty_ioctl.o tty_ldisc.o \ - tty_buffer.o tty_port.o tty_mutex.o tty_ldsem.o + tty_buffer.o tty_port.o tty_mutex.o \ + tty_ldsem.o tty_baudrate.o obj-$(CONFIG_LEGACY_PTYS) += pty.o obj-$(CONFIG_UNIX98_PTYS) += pty.o obj-$(CONFIG_AUDIT) += tty_audit.o diff --git a/drivers/tty/tty_baudrate.c b/drivers/tty/tty_baudrate.c new file mode 100644 index 000000000000..5c33fd25676d --- /dev/null +++ b/drivers/tty/tty_baudrate.c @@ -0,0 +1,232 @@ +/* + * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds + */ + +#include +#include +#include +#include +#include + + +/* + * Routine which returns the baud rate of the tty + * + * Note that the baud_table needs to be kept in sync with the + * include/asm/termbits.h file. + */ +static const speed_t baud_table[] = { + 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800, + 9600, 19200, 38400, 57600, 115200, 230400, 460800, +#ifdef __sparc__ + 76800, 153600, 307200, 614400, 921600 +#else + 500000, 576000, 921600, 1000000, 1152000, 1500000, 2000000, + 2500000, 3000000, 3500000, 4000000 +#endif +}; + +#ifndef __sparc__ +static const tcflag_t baud_bits[] = { + B0, B50, B75, B110, B134, B150, B200, B300, B600, + B1200, B1800, B2400, B4800, B9600, B19200, B38400, + B57600, B115200, B230400, B460800, B500000, B576000, + B921600, B1000000, B1152000, B1500000, B2000000, B2500000, + B3000000, B3500000, B4000000 +}; +#else +static const tcflag_t baud_bits[] = { + B0, B50, B75, B110, B134, B150, B200, B300, B600, + B1200, B1800, B2400, B4800, B9600, B19200, B38400, + B57600, B115200, B230400, B460800, B76800, B153600, + B307200, B614400, B921600 +}; +#endif + +static int n_baud_table = ARRAY_SIZE(baud_table); + +/** + * tty_termios_baud_rate + * @termios: termios structure + * + * Convert termios baud rate data into a speed. This should be called + * with the termios lock held if this termios is a terminal termios + * structure. May change the termios data. Device drivers can call this + * function but should use ->c_[io]speed directly as they are updated. + * + * Locking: none + */ + +speed_t tty_termios_baud_rate(struct ktermios *termios) +{ + unsigned int cbaud; + + cbaud = termios->c_cflag & CBAUD; + +#ifdef BOTHER + /* Magic token for arbitrary speed via c_ispeed/c_ospeed */ + if (cbaud == BOTHER) + return termios->c_ospeed; +#endif + if (cbaud & CBAUDEX) { + cbaud &= ~CBAUDEX; + + if (cbaud < 1 || cbaud + 15 > n_baud_table) + termios->c_cflag &= ~CBAUDEX; + else + cbaud += 15; + } + return baud_table[cbaud]; +} +EXPORT_SYMBOL(tty_termios_baud_rate); + +/** + * tty_termios_input_baud_rate + * @termios: termios structure + * + * Convert termios baud rate data into a speed. This should be called + * with the termios lock held if this termios is a terminal termios + * structure. May change the termios data. Device drivers can call this + * function but should use ->c_[io]speed directly as they are updated. + * + * Locking: none + */ + +speed_t tty_termios_input_baud_rate(struct ktermios *termios) +{ +#ifdef IBSHIFT + unsigned int cbaud = (termios->c_cflag >> IBSHIFT) & CBAUD; + + if (cbaud == B0) + return tty_termios_baud_rate(termios); + + /* Magic token for arbitrary speed via c_ispeed*/ + if (cbaud == BOTHER) + return termios->c_ispeed; + + if (cbaud & CBAUDEX) { + cbaud &= ~CBAUDEX; + + if (cbaud < 1 || cbaud + 15 > n_baud_table) + termios->c_cflag &= ~(CBAUDEX << IBSHIFT); + else + cbaud += 15; + } + return baud_table[cbaud]; +#else + return tty_termios_baud_rate(termios); +#endif +} +EXPORT_SYMBOL(tty_termios_input_baud_rate); + +/** + * tty_termios_encode_baud_rate + * @termios: ktermios structure holding user requested state + * @ispeed: input speed + * @ospeed: output speed + * + * Encode the speeds set into the passed termios structure. This is + * used as a library helper for drivers so that they can report back + * the actual speed selected when it differs from the speed requested + * + * For maximal back compatibility with legacy SYS5/POSIX *nix behaviour + * we need to carefully set the bits when the user does not get the + * desired speed. We allow small margins and preserve as much of possible + * of the input intent to keep compatibility. + * + * Locking: Caller should hold termios lock. This is already held + * when calling this function from the driver termios handler. + * + * The ifdefs deal with platforms whose owners have yet to update them + * and will all go away once this is done. + */ + +void tty_termios_encode_baud_rate(struct ktermios *termios, + speed_t ibaud, speed_t obaud) +{ + int i = 0; + int ifound = -1, ofound = -1; + int iclose = ibaud/50, oclose = obaud/50; + int ibinput = 0; + + if (obaud == 0) /* CD dropped */ + ibaud = 0; /* Clear ibaud to be sure */ + + termios->c_ispeed = ibaud; + termios->c_ospeed = obaud; + +#ifdef BOTHER + /* If the user asked for a precise weird speed give a precise weird + answer. If they asked for a Bfoo speed they may have problems + digesting non-exact replies so fuzz a bit */ + + if ((termios->c_cflag & CBAUD) == BOTHER) + oclose = 0; + if (((termios->c_cflag >> IBSHIFT) & CBAUD) == BOTHER) + iclose = 0; + if ((termios->c_cflag >> IBSHIFT) & CBAUD) + ibinput = 1; /* An input speed was specified */ +#endif + termios->c_cflag &= ~CBAUD; + + /* + * Our goal is to find a close match to the standard baud rate + * returned. Walk the baud rate table and if we get a very close + * match then report back the speed as a POSIX Bxxxx value by + * preference + */ + + do { + if (obaud - oclose <= baud_table[i] && + obaud + oclose >= baud_table[i]) { + termios->c_cflag |= baud_bits[i]; + ofound = i; + } + if (ibaud - iclose <= baud_table[i] && + ibaud + iclose >= baud_table[i]) { + /* For the case input == output don't set IBAUD bits + if the user didn't do so */ + if (ofound == i && !ibinput) + ifound = i; +#ifdef IBSHIFT + else { + ifound = i; + termios->c_cflag |= (baud_bits[i] << IBSHIFT); + } +#endif + } + } while (++i < n_baud_table); + + /* + * If we found no match then use BOTHER if provided or warn + * the user their platform maintainer needs to wake up if not. + */ +#ifdef BOTHER + if (ofound == -1) + termios->c_cflag |= BOTHER; + /* Set exact input bits only if the input and output differ or the + user already did */ + if (ifound == -1 && (ibaud != obaud || ibinput)) + termios->c_cflag |= (BOTHER << IBSHIFT); +#else + if (ifound == -1 || ofound == -1) + pr_warn_once("tty: Unable to return correct speed data as your architecture needs updating.\n"); +#endif +} +EXPORT_SYMBOL_GPL(tty_termios_encode_baud_rate); + +/** + * tty_encode_baud_rate - set baud rate of the tty + * @ibaud: input baud rate + * @obad: output baud rate + * + * Update the current termios data for the tty with the new speed + * settings. The caller must hold the termios_rwsem for the tty in + * question. + */ + +void tty_encode_baud_rate(struct tty_struct *tty, speed_t ibaud, speed_t obaud) +{ + tty_termios_encode_baud_rate(&tty->termios, ibaud, obaud); +} +EXPORT_SYMBOL_GPL(tty_encode_baud_rate); diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c index a9a978731c5b..efa96e6c4c1b 100644 --- a/drivers/tty/tty_ioctl.c +++ b/drivers/tty/tty_ioctl.c @@ -258,228 +258,6 @@ static void unset_locked_termios(struct tty_struct *tty, struct ktermios *old) /* FIXME: What should we do for i/ospeed */ } -/* - * Routine which returns the baud rate of the tty - * - * Note that the baud_table needs to be kept in sync with the - * include/asm/termbits.h file. - */ -static const speed_t baud_table[] = { - 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800, - 9600, 19200, 38400, 57600, 115200, 230400, 460800, -#ifdef __sparc__ - 76800, 153600, 307200, 614400, 921600 -#else - 500000, 576000, 921600, 1000000, 1152000, 1500000, 2000000, - 2500000, 3000000, 3500000, 4000000 -#endif -}; - -#ifndef __sparc__ -static const tcflag_t baud_bits[] = { - B0, B50, B75, B110, B134, B150, B200, B300, B600, - B1200, B1800, B2400, B4800, B9600, B19200, B38400, - B57600, B115200, B230400, B460800, B500000, B576000, - B921600, B1000000, B1152000, B1500000, B2000000, B2500000, - B3000000, B3500000, B4000000 -}; -#else -static const tcflag_t baud_bits[] = { - B0, B50, B75, B110, B134, B150, B200, B300, B600, - B1200, B1800, B2400, B4800, B9600, B19200, B38400, - B57600, B115200, B230400, B460800, B76800, B153600, - B307200, B614400, B921600 -}; -#endif - -static int n_baud_table = ARRAY_SIZE(baud_table); - -/** - * tty_termios_baud_rate - * @termios: termios structure - * - * Convert termios baud rate data into a speed. This should be called - * with the termios lock held if this termios is a terminal termios - * structure. May change the termios data. Device drivers can call this - * function but should use ->c_[io]speed directly as they are updated. - * - * Locking: none - */ - -speed_t tty_termios_baud_rate(struct ktermios *termios) -{ - unsigned int cbaud; - - cbaud = termios->c_cflag & CBAUD; - -#ifdef BOTHER - /* Magic token for arbitrary speed via c_ispeed/c_ospeed */ - if (cbaud == BOTHER) - return termios->c_ospeed; -#endif - if (cbaud & CBAUDEX) { - cbaud &= ~CBAUDEX; - - if (cbaud < 1 || cbaud + 15 > n_baud_table) - termios->c_cflag &= ~CBAUDEX; - else - cbaud += 15; - } - return baud_table[cbaud]; -} -EXPORT_SYMBOL(tty_termios_baud_rate); - -/** - * tty_termios_input_baud_rate - * @termios: termios structure - * - * Convert termios baud rate data into a speed. This should be called - * with the termios lock held if this termios is a terminal termios - * structure. May change the termios data. Device drivers can call this - * function but should use ->c_[io]speed directly as they are updated. - * - * Locking: none - */ - -speed_t tty_termios_input_baud_rate(struct ktermios *termios) -{ -#ifdef IBSHIFT - unsigned int cbaud = (termios->c_cflag >> IBSHIFT) & CBAUD; - - if (cbaud == B0) - return tty_termios_baud_rate(termios); - - /* Magic token for arbitrary speed via c_ispeed*/ - if (cbaud == BOTHER) - return termios->c_ispeed; - - if (cbaud & CBAUDEX) { - cbaud &= ~CBAUDEX; - - if (cbaud < 1 || cbaud + 15 > n_baud_table) - termios->c_cflag &= ~(CBAUDEX << IBSHIFT); - else - cbaud += 15; - } - return baud_table[cbaud]; -#else - return tty_termios_baud_rate(termios); -#endif -} -EXPORT_SYMBOL(tty_termios_input_baud_rate); - -/** - * tty_termios_encode_baud_rate - * @termios: ktermios structure holding user requested state - * @ispeed: input speed - * @ospeed: output speed - * - * Encode the speeds set into the passed termios structure. This is - * used as a library helper for drivers so that they can report back - * the actual speed selected when it differs from the speed requested - * - * For maximal back compatibility with legacy SYS5/POSIX *nix behaviour - * we need to carefully set the bits when the user does not get the - * desired speed. We allow small margins and preserve as much of possible - * of the input intent to keep compatibility. - * - * Locking: Caller should hold termios lock. This is already held - * when calling this function from the driver termios handler. - * - * The ifdefs deal with platforms whose owners have yet to update them - * and will all go away once this is done. - */ - -void tty_termios_encode_baud_rate(struct ktermios *termios, - speed_t ibaud, speed_t obaud) -{ - int i = 0; - int ifound = -1, ofound = -1; - int iclose = ibaud/50, oclose = obaud/50; - int ibinput = 0; - - if (obaud == 0) /* CD dropped */ - ibaud = 0; /* Clear ibaud to be sure */ - - termios->c_ispeed = ibaud; - termios->c_ospeed = obaud; - -#ifdef BOTHER - /* If the user asked for a precise weird speed give a precise weird - answer. If they asked for a Bfoo speed they may have problems - digesting non-exact replies so fuzz a bit */ - - if ((termios->c_cflag & CBAUD) == BOTHER) - oclose = 0; - if (((termios->c_cflag >> IBSHIFT) & CBAUD) == BOTHER) - iclose = 0; - if ((termios->c_cflag >> IBSHIFT) & CBAUD) - ibinput = 1; /* An input speed was specified */ -#endif - termios->c_cflag &= ~CBAUD; - - /* - * Our goal is to find a close match to the standard baud rate - * returned. Walk the baud rate table and if we get a very close - * match then report back the speed as a POSIX Bxxxx value by - * preference - */ - - do { - if (obaud - oclose <= baud_table[i] && - obaud + oclose >= baud_table[i]) { - termios->c_cflag |= baud_bits[i]; - ofound = i; - } - if (ibaud - iclose <= baud_table[i] && - ibaud + iclose >= baud_table[i]) { - /* For the case input == output don't set IBAUD bits - if the user didn't do so */ - if (ofound == i && !ibinput) - ifound = i; -#ifdef IBSHIFT - else { - ifound = i; - termios->c_cflag |= (baud_bits[i] << IBSHIFT); - } -#endif - } - } while (++i < n_baud_table); - - /* - * If we found no match then use BOTHER if provided or warn - * the user their platform maintainer needs to wake up if not. - */ -#ifdef BOTHER - if (ofound == -1) - termios->c_cflag |= BOTHER; - /* Set exact input bits only if the input and output differ or the - user already did */ - if (ifound == -1 && (ibaud != obaud || ibinput)) - termios->c_cflag |= (BOTHER << IBSHIFT); -#else - if (ifound == -1 || ofound == -1) - pr_warn_once("tty: Unable to return correct speed data as your architecture needs updating.\n"); -#endif -} -EXPORT_SYMBOL_GPL(tty_termios_encode_baud_rate); - -/** - * tty_encode_baud_rate - set baud rate of the tty - * @ibaud: input baud rate - * @obad: output baud rate - * - * Update the current termios data for the tty with the new speed - * settings. The caller must hold the termios_rwsem for the tty in - * question. - */ - -void tty_encode_baud_rate(struct tty_struct *tty, speed_t ibaud, speed_t obaud) -{ - tty_termios_encode_baud_rate(&tty->termios, ibaud, obaud); -} -EXPORT_SYMBOL_GPL(tty_encode_baud_rate); - /** * tty_termios_copy_hw - copy hardware settings * @new: New termios -- cgit v1.2.3 From a1235b3eb10086b8420f37bbb6c29436f55940ba Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Wed, 12 Apr 2017 18:37:16 -0400 Subject: tty: split job control support into a file of its own This makes it easier for job control to become optional and/or usable independently from tty_io.c, as well as providing a nice purpose separation. No logical changes from this patch. Signed-off-by: Nicolas Pitre Signed-off-by: Greg Kroah-Hartman --- drivers/tty/Makefile | 2 +- drivers/tty/tty_io.c | 547 +-------------------------------------------- drivers/tty/tty_jobctrl.c | 554 ++++++++++++++++++++++++++++++++++++++++++++++ include/linux/tty.h | 6 + 4 files changed, 572 insertions(+), 537 deletions(-) create mode 100644 drivers/tty/tty_jobctrl.c diff --git a/drivers/tty/Makefile b/drivers/tty/Makefile index 6983b5a49ec3..f02becdb3e33 100644 --- a/drivers/tty/Makefile +++ b/drivers/tty/Makefile @@ -1,6 +1,6 @@ obj-$(CONFIG_TTY) += tty_io.o n_tty.o tty_ioctl.o tty_ldisc.o \ tty_buffer.o tty_port.o tty_mutex.o \ - tty_ldsem.o tty_baudrate.o + tty_ldsem.o tty_baudrate.o tty_jobctrl.o obj-$(CONFIG_LEGACY_PTYS) += pty.o obj-$(CONFIG_UNIX98_PTYS) += pty.o obj-$(CONFIG_AUDIT) += tty_audit.o diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index 8244b6199784..0c150b5a9dd6 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -377,65 +377,6 @@ struct tty_driver *tty_find_polling_driver(char *name, int *line) EXPORT_SYMBOL_GPL(tty_find_polling_driver); #endif -static int is_ignored(int sig) -{ - return (sigismember(¤t->blocked, sig) || - current->sighand->action[sig-1].sa.sa_handler == SIG_IGN); -} - -/** - * tty_check_change - check for POSIX terminal changes - * @tty: tty to check - * - * If we try to write to, or set the state of, a terminal and we're - * not in the foreground, send a SIGTTOU. If the signal is blocked or - * ignored, go ahead and perform the operation. (POSIX 7.2) - * - * Locking: ctrl_lock - */ - -int __tty_check_change(struct tty_struct *tty, int sig) -{ - unsigned long flags; - struct pid *pgrp, *tty_pgrp; - int ret = 0; - - if (current->signal->tty != tty) - return 0; - - rcu_read_lock(); - pgrp = task_pgrp(current); - - spin_lock_irqsave(&tty->ctrl_lock, flags); - tty_pgrp = tty->pgrp; - spin_unlock_irqrestore(&tty->ctrl_lock, flags); - - if (tty_pgrp && pgrp != tty->pgrp) { - if (is_ignored(sig)) { - if (sig == SIGTTIN) - ret = -EIO; - } else if (is_current_pgrp_orphaned()) - ret = -EIO; - else { - kill_pgrp(pgrp, sig, 1); - set_thread_flag(TIF_SIGPENDING); - ret = -ERESTARTSYS; - } - } - rcu_read_unlock(); - - if (!tty_pgrp) - tty_warn(tty, "sig=%d, tty->pgrp == NULL!\n", sig); - - return ret; -} - -int tty_check_change(struct tty_struct *tty) -{ - return __tty_check_change(tty, SIGTTOU); -} -EXPORT_SYMBOL(tty_check_change); - static ssize_t hung_up_tty_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) { @@ -509,79 +450,6 @@ static const struct file_operations hung_up_tty_fops = { static DEFINE_SPINLOCK(redirect_lock); static struct file *redirect; - -void proc_clear_tty(struct task_struct *p) -{ - unsigned long flags; - struct tty_struct *tty; - spin_lock_irqsave(&p->sighand->siglock, flags); - tty = p->signal->tty; - p->signal->tty = NULL; - spin_unlock_irqrestore(&p->sighand->siglock, flags); - tty_kref_put(tty); -} - -/** - * proc_set_tty - set the controlling terminal - * - * Only callable by the session leader and only if it does not already have - * a controlling terminal. - * - * Caller must hold: tty_lock() - * a readlock on tasklist_lock - * sighand lock - */ -static void __proc_set_tty(struct tty_struct *tty) -{ - unsigned long flags; - - spin_lock_irqsave(&tty->ctrl_lock, flags); - /* - * The session and fg pgrp references will be non-NULL if - * tiocsctty() is stealing the controlling tty - */ - put_pid(tty->session); - put_pid(tty->pgrp); - tty->pgrp = get_pid(task_pgrp(current)); - spin_unlock_irqrestore(&tty->ctrl_lock, flags); - tty->session = get_pid(task_session(current)); - if (current->signal->tty) { - tty_debug(tty, "current tty %s not NULL!!\n", - current->signal->tty->name); - tty_kref_put(current->signal->tty); - } - put_pid(current->signal->tty_old_pgrp); - current->signal->tty = tty_kref_get(tty); - current->signal->tty_old_pgrp = NULL; -} - -static void proc_set_tty(struct tty_struct *tty) -{ - spin_lock_irq(¤t->sighand->siglock); - __proc_set_tty(tty); - spin_unlock_irq(¤t->sighand->siglock); -} - -struct tty_struct *get_current_tty(void) -{ - struct tty_struct *tty; - unsigned long flags; - - spin_lock_irqsave(¤t->sighand->siglock, flags); - tty = tty_kref_get(current->signal->tty); - spin_unlock_irqrestore(¤t->sighand->siglock, flags); - return tty; -} -EXPORT_SYMBOL_GPL(get_current_tty); - -static void session_clear_tty(struct pid *session) -{ - struct task_struct *p; - do_each_pid_task(session, PIDTYPE_SID, p) { - proc_clear_tty(p); - } while_each_pid_task(session, PIDTYPE_SID, p); -} - /** * tty_wakeup - request more data * @tty: terminal @@ -608,60 +476,6 @@ void tty_wakeup(struct tty_struct *tty) EXPORT_SYMBOL_GPL(tty_wakeup); -/** - * tty_signal_session_leader - sends SIGHUP to session leader - * @tty controlling tty - * @exit_session if non-zero, signal all foreground group processes - * - * Send SIGHUP and SIGCONT to the session leader and its process group. - * Optionally, signal all processes in the foreground process group. - * - * Returns the number of processes in the session with this tty - * as their controlling terminal. This value is used to drop - * tty references for those processes. - */ -static int tty_signal_session_leader(struct tty_struct *tty, int exit_session) -{ - struct task_struct *p; - int refs = 0; - struct pid *tty_pgrp = NULL; - - read_lock(&tasklist_lock); - if (tty->session) { - do_each_pid_task(tty->session, PIDTYPE_SID, p) { - spin_lock_irq(&p->sighand->siglock); - if (p->signal->tty == tty) { - p->signal->tty = NULL; - /* We defer the dereferences outside fo - the tasklist lock */ - refs++; - } - if (!p->signal->leader) { - spin_unlock_irq(&p->sighand->siglock); - continue; - } - __group_send_sig_info(SIGHUP, SEND_SIG_PRIV, p); - __group_send_sig_info(SIGCONT, SEND_SIG_PRIV, p); - put_pid(p->signal->tty_old_pgrp); /* A noop */ - spin_lock(&tty->ctrl_lock); - tty_pgrp = get_pid(tty->pgrp); - if (tty->pgrp) - p->signal->tty_old_pgrp = get_pid(tty->pgrp); - spin_unlock(&tty->ctrl_lock); - spin_unlock_irq(&p->sighand->siglock); - } while_each_pid_task(tty->session, PIDTYPE_SID, p); - } - read_unlock(&tasklist_lock); - - if (tty_pgrp) { - if (exit_session) - kill_pgrp(tty_pgrp, SIGHUP, exit_session); - put_pid(tty_pgrp); - } - - return refs; -} - /** * __tty_hangup - actual handler for hangup events * @work: tty device @@ -840,7 +654,7 @@ void tty_vhangup_self(void) * is complete. That guarantee is necessary for security reasons. */ -static void tty_vhangup_session(struct tty_struct *tty) +void tty_vhangup_session(struct tty_struct *tty) { tty_debug_hangup(tty, "session hangup\n"); __tty_hangup(tty, 1); @@ -861,106 +675,6 @@ int tty_hung_up_p(struct file *filp) EXPORT_SYMBOL(tty_hung_up_p); -/** - * disassociate_ctty - disconnect controlling tty - * @on_exit: true if exiting so need to "hang up" the session - * - * This function is typically called only by the session leader, when - * it wants to disassociate itself from its controlling tty. - * - * It performs the following functions: - * (1) Sends a SIGHUP and SIGCONT to the foreground process group - * (2) Clears the tty from being controlling the session - * (3) Clears the controlling tty for all processes in the - * session group. - * - * The argument on_exit is set to 1 if called when a process is - * exiting; it is 0 if called by the ioctl TIOCNOTTY. - * - * Locking: - * BTM is taken for hysterical raisins, and held when - * called from no_tty(). - * tty_mutex is taken to protect tty - * ->siglock is taken to protect ->signal/->sighand - * tasklist_lock is taken to walk process list for sessions - * ->siglock is taken to protect ->signal/->sighand - */ - -void disassociate_ctty(int on_exit) -{ - struct tty_struct *tty; - - if (!current->signal->leader) - return; - - tty = get_current_tty(); - if (tty) { - if (on_exit && tty->driver->type != TTY_DRIVER_TYPE_PTY) { - tty_vhangup_session(tty); - } else { - struct pid *tty_pgrp = tty_get_pgrp(tty); - if (tty_pgrp) { - kill_pgrp(tty_pgrp, SIGHUP, on_exit); - if (!on_exit) - kill_pgrp(tty_pgrp, SIGCONT, on_exit); - put_pid(tty_pgrp); - } - } - tty_kref_put(tty); - - } else if (on_exit) { - struct pid *old_pgrp; - spin_lock_irq(¤t->sighand->siglock); - old_pgrp = current->signal->tty_old_pgrp; - current->signal->tty_old_pgrp = NULL; - spin_unlock_irq(¤t->sighand->siglock); - if (old_pgrp) { - kill_pgrp(old_pgrp, SIGHUP, on_exit); - kill_pgrp(old_pgrp, SIGCONT, on_exit); - put_pid(old_pgrp); - } - return; - } - - spin_lock_irq(¤t->sighand->siglock); - put_pid(current->signal->tty_old_pgrp); - current->signal->tty_old_pgrp = NULL; - - tty = tty_kref_get(current->signal->tty); - if (tty) { - unsigned long flags; - spin_lock_irqsave(&tty->ctrl_lock, flags); - put_pid(tty->session); - put_pid(tty->pgrp); - tty->session = NULL; - tty->pgrp = NULL; - spin_unlock_irqrestore(&tty->ctrl_lock, flags); - tty_kref_put(tty); - } else - tty_debug_hangup(tty, "no current tty\n"); - - spin_unlock_irq(¤t->sighand->siglock); - /* Now clear signal->tty under the lock */ - read_lock(&tasklist_lock); - session_clear_tty(task_session(current)); - read_unlock(&tasklist_lock); -} - -/** - * - * no_tty - Ensure the current process does not have a controlling tty - */ -void no_tty(void) -{ - /* FIXME: Review locking here. The tty_lock never covered any race - between a new association and proc_clear_tty but possible we need - to protect against this anyway */ - struct task_struct *tsk = current; - disassociate_ctty(0); - proc_clear_tty(tsk); -} - - /** * stop_tty - propagate flow control * @tty: tty to stop @@ -2163,38 +1877,13 @@ retry_open: } clear_bit(TTY_HUPPED, &tty->flags); - - read_lock(&tasklist_lock); - spin_lock_irq(¤t->sighand->siglock); noctty = (filp->f_flags & O_NOCTTY) || - (IS_ENABLED(CONFIG_VT) && device == MKDEV(TTY_MAJOR, 0)) || - device == MKDEV(TTYAUX_MAJOR, 1) || - (tty->driver->type == TTY_DRIVER_TYPE_PTY && - tty->driver->subtype == PTY_TYPE_MASTER); - - if (!noctty && - current->signal->leader && - !current->signal->tty && - tty->session == NULL) { - /* - * Don't let a process that only has write access to the tty - * obtain the privileges associated with having a tty as - * controlling terminal (being able to reopen it with full - * access through /dev/tty, being able to perform pushback). - * Many distributions set the group of all ttys to "tty" and - * grant write-only access to all terminals for setgid tty - * binaries, which should not imply full privileges on all ttys. - * - * This could theoretically break old code that performs open() - * on a write-only file descriptor. In that case, it might be - * necessary to also permit this if - * inode_permission(inode, MAY_READ) == 0. - */ - if (filp->f_mode & FMODE_READ) - __proc_set_tty(tty); - } - spin_unlock_irq(¤t->sighand->siglock); - read_unlock(&tasklist_lock); + (IS_ENABLED(CONFIG_VT) && device == MKDEV(TTY_MAJOR, 0)) || + device == MKDEV(TTYAUX_MAJOR, 1) || + (tty->driver->type == TTY_DRIVER_TYPE_PTY && + tty->driver->subtype == PTY_TYPE_MASTER); + if (!noctty) + tty_open_proc_set_tty(filp, tty); tty_unlock(tty); return 0; } @@ -2456,211 +2145,6 @@ static int fionbio(struct file *file, int __user *p) return 0; } -/** - * tiocsctty - set controlling tty - * @tty: tty structure - * @arg: user argument - * - * This ioctl is used to manage job control. It permits a session - * leader to set this tty as the controlling tty for the session. - * - * Locking: - * Takes tty_lock() to serialize proc_set_tty() for this tty - * Takes tasklist_lock internally to walk sessions - * Takes ->siglock() when updating signal->tty - */ - -static int tiocsctty(struct tty_struct *tty, struct file *file, int arg) -{ - int ret = 0; - - tty_lock(tty); - read_lock(&tasklist_lock); - - if (current->signal->leader && (task_session(current) == tty->session)) - goto unlock; - - /* - * The process must be a session leader and - * not have a controlling tty already. - */ - if (!current->signal->leader || current->signal->tty) { - ret = -EPERM; - goto unlock; - } - - if (tty->session) { - /* - * This tty is already the controlling - * tty for another session group! - */ - if (arg == 1 && capable(CAP_SYS_ADMIN)) { - /* - * Steal it away - */ - session_clear_tty(tty->session); - } else { - ret = -EPERM; - goto unlock; - } - } - - /* See the comment in tty_open(). */ - if ((file->f_mode & FMODE_READ) == 0 && !capable(CAP_SYS_ADMIN)) { - ret = -EPERM; - goto unlock; - } - - proc_set_tty(tty); -unlock: - read_unlock(&tasklist_lock); - tty_unlock(tty); - return ret; -} - -/** - * tty_get_pgrp - return a ref counted pgrp pid - * @tty: tty to read - * - * Returns a refcounted instance of the pid struct for the process - * group controlling the tty. - */ - -struct pid *tty_get_pgrp(struct tty_struct *tty) -{ - unsigned long flags; - struct pid *pgrp; - - spin_lock_irqsave(&tty->ctrl_lock, flags); - pgrp = get_pid(tty->pgrp); - spin_unlock_irqrestore(&tty->ctrl_lock, flags); - - return pgrp; -} -EXPORT_SYMBOL_GPL(tty_get_pgrp); - -/* - * This checks not only the pgrp, but falls back on the pid if no - * satisfactory pgrp is found. I dunno - gdb doesn't work correctly - * without this... - * - * The caller must hold rcu lock or the tasklist lock. - */ -static struct pid *session_of_pgrp(struct pid *pgrp) -{ - struct task_struct *p; - struct pid *sid = NULL; - - p = pid_task(pgrp, PIDTYPE_PGID); - if (p == NULL) - p = pid_task(pgrp, PIDTYPE_PID); - if (p != NULL) - sid = task_session(p); - - return sid; -} - -/** - * tiocgpgrp - get process group - * @tty: tty passed by user - * @real_tty: tty side of the tty passed by the user if a pty else the tty - * @p: returned pid - * - * Obtain the process group of the tty. If there is no process group - * return an error. - * - * Locking: none. Reference to current->signal->tty is safe. - */ - -static int tiocgpgrp(struct tty_struct *tty, struct tty_struct *real_tty, pid_t __user *p) -{ - struct pid *pid; - int ret; - /* - * (tty == real_tty) is a cheap way of - * testing if the tty is NOT a master pty. - */ - if (tty == real_tty && current->signal->tty != real_tty) - return -ENOTTY; - pid = tty_get_pgrp(real_tty); - ret = put_user(pid_vnr(pid), p); - put_pid(pid); - return ret; -} - -/** - * tiocspgrp - attempt to set process group - * @tty: tty passed by user - * @real_tty: tty side device matching tty passed by user - * @p: pid pointer - * - * Set the process group of the tty to the session passed. Only - * permitted where the tty session is our session. - * - * Locking: RCU, ctrl lock - */ - -static int tiocspgrp(struct tty_struct *tty, struct tty_struct *real_tty, pid_t __user *p) -{ - struct pid *pgrp; - pid_t pgrp_nr; - int retval = tty_check_change(real_tty); - - if (retval == -EIO) - return -ENOTTY; - if (retval) - return retval; - if (!current->signal->tty || - (current->signal->tty != real_tty) || - (real_tty->session != task_session(current))) - return -ENOTTY; - if (get_user(pgrp_nr, p)) - return -EFAULT; - if (pgrp_nr < 0) - return -EINVAL; - rcu_read_lock(); - pgrp = find_vpid(pgrp_nr); - retval = -ESRCH; - if (!pgrp) - goto out_unlock; - retval = -EPERM; - if (session_of_pgrp(pgrp) != task_session(current)) - goto out_unlock; - retval = 0; - spin_lock_irq(&tty->ctrl_lock); - put_pid(real_tty->pgrp); - real_tty->pgrp = get_pid(pgrp); - spin_unlock_irq(&tty->ctrl_lock); -out_unlock: - rcu_read_unlock(); - return retval; -} - -/** - * tiocgsid - get session id - * @tty: tty passed by user - * @real_tty: tty side of the tty passed by the user if a pty else the tty - * @p: pointer to returned session id - * - * Obtain the session id of the tty. If there is no session - * return an error. - * - * Locking: none. Reference to current->signal->tty is safe. - */ - -static int tiocgsid(struct tty_struct *tty, struct tty_struct *real_tty, pid_t __user *p) -{ - /* - * (tty == real_tty) is a cheap way of - * testing if the tty is NOT a master pty. - */ - if (tty == real_tty && current->signal->tty != real_tty) - return -ENOTTY; - if (!real_tty->session) - return -ENOTTY; - return put_user(pid_vnr(real_tty->session), p); -} - /** * tiocsetd - set line discipline * @tty: tty device @@ -2920,19 +2404,6 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg) int excl = test_bit(TTY_EXCLUSIVE, &tty->flags); return put_user(excl, (int __user *)p); } - case TIOCNOTTY: - if (current->signal->tty != tty) - return -ENOTTY; - no_tty(); - return 0; - case TIOCSCTTY: - return tiocsctty(real_tty, file, arg); - case TIOCGPGRP: - return tiocgpgrp(tty, real_tty, p); - case TIOCSPGRP: - return tiocspgrp(tty, real_tty, p); - case TIOCGSID: - return tiocgsid(tty, real_tty, p); case TIOCGETD: return tiocgetd(tty, p); case TIOCSETD: @@ -2993,6 +2464,10 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg) case TIOCSSERIAL: tty_warn_deprecated_flags(p); break; + default: + retval = tty_jobctrl_ioctl(tty, real_tty, file, cmd, arg); + if (retval != -ENOIOCTLCMD) + return retval; } if (tty->ops->ioctl) { retval = tty->ops->ioctl(tty, cmd, arg); diff --git a/drivers/tty/tty_jobctrl.c b/drivers/tty/tty_jobctrl.c new file mode 100644 index 000000000000..e7032309ee87 --- /dev/null +++ b/drivers/tty/tty_jobctrl.c @@ -0,0 +1,554 @@ +/* + * Copyright (C) 1991, 1992 Linus Torvalds + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +static int is_ignored(int sig) +{ + return (sigismember(¤t->blocked, sig) || + current->sighand->action[sig-1].sa.sa_handler == SIG_IGN); +} + +/** + * tty_check_change - check for POSIX terminal changes + * @tty: tty to check + * + * If we try to write to, or set the state of, a terminal and we're + * not in the foreground, send a SIGTTOU. If the signal is blocked or + * ignored, go ahead and perform the operation. (POSIX 7.2) + * + * Locking: ctrl_lock + */ +int __tty_check_change(struct tty_struct *tty, int sig) +{ + unsigned long flags; + struct pid *pgrp, *tty_pgrp; + int ret = 0; + + if (current->signal->tty != tty) + return 0; + + rcu_read_lock(); + pgrp = task_pgrp(current); + + spin_lock_irqsave(&tty->ctrl_lock, flags); + tty_pgrp = tty->pgrp; + spin_unlock_irqrestore(&tty->ctrl_lock, flags); + + if (tty_pgrp && pgrp != tty->pgrp) { + if (is_ignored(sig)) { + if (sig == SIGTTIN) + ret = -EIO; + } else if (is_current_pgrp_orphaned()) + ret = -EIO; + else { + kill_pgrp(pgrp, sig, 1); + set_thread_flag(TIF_SIGPENDING); + ret = -ERESTARTSYS; + } + } + rcu_read_unlock(); + + if (!tty_pgrp) + tty_warn(tty, "sig=%d, tty->pgrp == NULL!\n", sig); + + return ret; +} + +int tty_check_change(struct tty_struct *tty) +{ + return __tty_check_change(tty, SIGTTOU); +} +EXPORT_SYMBOL(tty_check_change); + +void proc_clear_tty(struct task_struct *p) +{ + unsigned long flags; + struct tty_struct *tty; + spin_lock_irqsave(&p->sighand->siglock, flags); + tty = p->signal->tty; + p->signal->tty = NULL; + spin_unlock_irqrestore(&p->sighand->siglock, flags); + tty_kref_put(tty); +} + +/** + * proc_set_tty - set the controlling terminal + * + * Only callable by the session leader and only if it does not already have + * a controlling terminal. + * + * Caller must hold: tty_lock() + * a readlock on tasklist_lock + * sighand lock + */ +static void __proc_set_tty(struct tty_struct *tty) +{ + unsigned long flags; + + spin_lock_irqsave(&tty->ctrl_lock, flags); + /* + * The session and fg pgrp references will be non-NULL if + * tiocsctty() is stealing the controlling tty + */ + put_pid(tty->session); + put_pid(tty->pgrp); + tty->pgrp = get_pid(task_pgrp(current)); + spin_unlock_irqrestore(&tty->ctrl_lock, flags); + tty->session = get_pid(task_session(current)); + if (current->signal->tty) { + tty_debug(tty, "current tty %s not NULL!!\n", + current->signal->tty->name); + tty_kref_put(current->signal->tty); + } + put_pid(current->signal->tty_old_pgrp); + current->signal->tty = tty_kref_get(tty); + current->signal->tty_old_pgrp = NULL; +} + +static void proc_set_tty(struct tty_struct *tty) +{ + spin_lock_irq(¤t->sighand->siglock); + __proc_set_tty(tty); + spin_unlock_irq(¤t->sighand->siglock); +} + +/* + * Called by tty_open() to set the controlling tty if applicable. + */ +void tty_open_proc_set_tty(struct file *filp, struct tty_struct *tty) +{ + read_lock(&tasklist_lock); + spin_lock_irq(¤t->sighand->siglock); + if (current->signal->leader && + !current->signal->tty && + tty->session == NULL) { + /* + * Don't let a process that only has write access to the tty + * obtain the privileges associated with having a tty as + * controlling terminal (being able to reopen it with full + * access through /dev/tty, being able to perform pushback). + * Many distributions set the group of all ttys to "tty" and + * grant write-only access to all terminals for setgid tty + * binaries, which should not imply full privileges on all ttys. + * + * This could theoretically break old code that performs open() + * on a write-only file descriptor. In that case, it might be + * necessary to also permit this if + * inode_permission(inode, MAY_READ) == 0. + */ + if (filp->f_mode & FMODE_READ) + __proc_set_tty(tty); + } + spin_unlock_irq(¤t->sighand->siglock); + read_unlock(&tasklist_lock); +} + +struct tty_struct *get_current_tty(void) +{ + struct tty_struct *tty; + unsigned long flags; + + spin_lock_irqsave(¤t->sighand->siglock, flags); + tty = tty_kref_get(current->signal->tty); + spin_unlock_irqrestore(¤t->sighand->siglock, flags); + return tty; +} +EXPORT_SYMBOL_GPL(get_current_tty); + +/* + * Called from tty_release(). + */ +void session_clear_tty(struct pid *session) +{ + struct task_struct *p; + do_each_pid_task(session, PIDTYPE_SID, p) { + proc_clear_tty(p); + } while_each_pid_task(session, PIDTYPE_SID, p); +} + +/** + * tty_signal_session_leader - sends SIGHUP to session leader + * @tty controlling tty + * @exit_session if non-zero, signal all foreground group processes + * + * Send SIGHUP and SIGCONT to the session leader and its process group. + * Optionally, signal all processes in the foreground process group. + * + * Returns the number of processes in the session with this tty + * as their controlling terminal. This value is used to drop + * tty references for those processes. + */ +int tty_signal_session_leader(struct tty_struct *tty, int exit_session) +{ + struct task_struct *p; + int refs = 0; + struct pid *tty_pgrp = NULL; + + read_lock(&tasklist_lock); + if (tty->session) { + do_each_pid_task(tty->session, PIDTYPE_SID, p) { + spin_lock_irq(&p->sighand->siglock); + if (p->signal->tty == tty) { + p->signal->tty = NULL; + /* We defer the dereferences outside fo + the tasklist lock */ + refs++; + } + if (!p->signal->leader) { + spin_unlock_irq(&p->sighand->siglock); + continue; + } + __group_send_sig_info(SIGHUP, SEND_SIG_PRIV, p); + __group_send_sig_info(SIGCONT, SEND_SIG_PRIV, p); + put_pid(p->signal->tty_old_pgrp); /* A noop */ + spin_lock(&tty->ctrl_lock); + tty_pgrp = get_pid(tty->pgrp); + if (tty->pgrp) + p->signal->tty_old_pgrp = get_pid(tty->pgrp); + spin_unlock(&tty->ctrl_lock); + spin_unlock_irq(&p->sighand->siglock); + } while_each_pid_task(tty->session, PIDTYPE_SID, p); + } + read_unlock(&tasklist_lock); + + if (tty_pgrp) { + if (exit_session) + kill_pgrp(tty_pgrp, SIGHUP, exit_session); + put_pid(tty_pgrp); + } + + return refs; +} + +/** + * disassociate_ctty - disconnect controlling tty + * @on_exit: true if exiting so need to "hang up" the session + * + * This function is typically called only by the session leader, when + * it wants to disassociate itself from its controlling tty. + * + * It performs the following functions: + * (1) Sends a SIGHUP and SIGCONT to the foreground process group + * (2) Clears the tty from being controlling the session + * (3) Clears the controlling tty for all processes in the + * session group. + * + * The argument on_exit is set to 1 if called when a process is + * exiting; it is 0 if called by the ioctl TIOCNOTTY. + * + * Locking: + * BTM is taken for hysterical raisons, and held when + * called from no_tty(). + * tty_mutex is taken to protect tty + * ->siglock is taken to protect ->signal/->sighand + * tasklist_lock is taken to walk process list for sessions + * ->siglock is taken to protect ->signal/->sighand + */ +void disassociate_ctty(int on_exit) +{ + struct tty_struct *tty; + + if (!current->signal->leader) + return; + + tty = get_current_tty(); + if (tty) { + if (on_exit && tty->driver->type != TTY_DRIVER_TYPE_PTY) { + tty_vhangup_session(tty); + } else { + struct pid *tty_pgrp = tty_get_pgrp(tty); + if (tty_pgrp) { + kill_pgrp(tty_pgrp, SIGHUP, on_exit); + if (!on_exit) + kill_pgrp(tty_pgrp, SIGCONT, on_exit); + put_pid(tty_pgrp); + } + } + tty_kref_put(tty); + + } else if (on_exit) { + struct pid *old_pgrp; + spin_lock_irq(¤t->sighand->siglock); + old_pgrp = current->signal->tty_old_pgrp; + current->signal->tty_old_pgrp = NULL; + spin_unlock_irq(¤t->sighand->siglock); + if (old_pgrp) { + kill_pgrp(old_pgrp, SIGHUP, on_exit); + kill_pgrp(old_pgrp, SIGCONT, on_exit); + put_pid(old_pgrp); + } + return; + } + + spin_lock_irq(¤t->sighand->siglock); + put_pid(current->signal->tty_old_pgrp); + current->signal->tty_old_pgrp = NULL; + + tty = tty_kref_get(current->signal->tty); + if (tty) { + unsigned long flags; + spin_lock_irqsave(&tty->ctrl_lock, flags); + put_pid(tty->session); + put_pid(tty->pgrp); + tty->session = NULL; + tty->pgrp = NULL; + spin_unlock_irqrestore(&tty->ctrl_lock, flags); + tty_kref_put(tty); + } + + spin_unlock_irq(¤t->sighand->siglock); + /* Now clear signal->tty under the lock */ + read_lock(&tasklist_lock); + session_clear_tty(task_session(current)); + read_unlock(&tasklist_lock); +} + +/** + * + * no_tty - Ensure the current process does not have a controlling tty + */ +void no_tty(void) +{ + /* FIXME: Review locking here. The tty_lock never covered any race + between a new association and proc_clear_tty but possible we need + to protect against this anyway */ + struct task_struct *tsk = current; + disassociate_ctty(0); + proc_clear_tty(tsk); +} + +/** + * tiocsctty - set controlling tty + * @tty: tty structure + * @arg: user argument + * + * This ioctl is used to manage job control. It permits a session + * leader to set this tty as the controlling tty for the session. + * + * Locking: + * Takes tty_lock() to serialize proc_set_tty() for this tty + * Takes tasklist_lock internally to walk sessions + * Takes ->siglock() when updating signal->tty + */ +static int tiocsctty(struct tty_struct *tty, struct file *file, int arg) +{ + int ret = 0; + + tty_lock(tty); + read_lock(&tasklist_lock); + + if (current->signal->leader && (task_session(current) == tty->session)) + goto unlock; + + /* + * The process must be a session leader and + * not have a controlling tty already. + */ + if (!current->signal->leader || current->signal->tty) { + ret = -EPERM; + goto unlock; + } + + if (tty->session) { + /* + * This tty is already the controlling + * tty for another session group! + */ + if (arg == 1 && capable(CAP_SYS_ADMIN)) { + /* + * Steal it away + */ + session_clear_tty(tty->session); + } else { + ret = -EPERM; + goto unlock; + } + } + + /* See the comment in tty_open_proc_set_tty(). */ + if ((file->f_mode & FMODE_READ) == 0 && !capable(CAP_SYS_ADMIN)) { + ret = -EPERM; + goto unlock; + } + + proc_set_tty(tty); +unlock: + read_unlock(&tasklist_lock); + tty_unlock(tty); + return ret; +} + +/** + * tty_get_pgrp - return a ref counted pgrp pid + * @tty: tty to read + * + * Returns a refcounted instance of the pid struct for the process + * group controlling the tty. + */ +struct pid *tty_get_pgrp(struct tty_struct *tty) +{ + unsigned long flags; + struct pid *pgrp; + + spin_lock_irqsave(&tty->ctrl_lock, flags); + pgrp = get_pid(tty->pgrp); + spin_unlock_irqrestore(&tty->ctrl_lock, flags); + + return pgrp; +} +EXPORT_SYMBOL_GPL(tty_get_pgrp); + +/* + * This checks not only the pgrp, but falls back on the pid if no + * satisfactory pgrp is found. I dunno - gdb doesn't work correctly + * without this... + * + * The caller must hold rcu lock or the tasklist lock. + */ +static struct pid *session_of_pgrp(struct pid *pgrp) +{ + struct task_struct *p; + struct pid *sid = NULL; + + p = pid_task(pgrp, PIDTYPE_PGID); + if (p == NULL) + p = pid_task(pgrp, PIDTYPE_PID); + if (p != NULL) + sid = task_session(p); + + return sid; +} + +/** + * tiocgpgrp - get process group + * @tty: tty passed by user + * @real_tty: tty side of the tty passed by the user if a pty else the tty + * @p: returned pid + * + * Obtain the process group of the tty. If there is no process group + * return an error. + * + * Locking: none. Reference to current->signal->tty is safe. + */ +static int tiocgpgrp(struct tty_struct *tty, struct tty_struct *real_tty, pid_t __user *p) +{ + struct pid *pid; + int ret; + /* + * (tty == real_tty) is a cheap way of + * testing if the tty is NOT a master pty. + */ + if (tty == real_tty && current->signal->tty != real_tty) + return -ENOTTY; + pid = tty_get_pgrp(real_tty); + ret = put_user(pid_vnr(pid), p); + put_pid(pid); + return ret; +} + +/** + * tiocspgrp - attempt to set process group + * @tty: tty passed by user + * @real_tty: tty side device matching tty passed by user + * @p: pid pointer + * + * Set the process group of the tty to the session passed. Only + * permitted where the tty session is our session. + * + * Locking: RCU, ctrl lock + */ +static int tiocspgrp(struct tty_struct *tty, struct tty_struct *real_tty, pid_t __user *p) +{ + struct pid *pgrp; + pid_t pgrp_nr; + int retval = tty_check_change(real_tty); + + if (retval == -EIO) + return -ENOTTY; + if (retval) + return retval; + if (!current->signal->tty || + (current->signal->tty != real_tty) || + (real_tty->session != task_session(current))) + return -ENOTTY; + if (get_user(pgrp_nr, p)) + return -EFAULT; + if (pgrp_nr < 0) + return -EINVAL; + rcu_read_lock(); + pgrp = find_vpid(pgrp_nr); + retval = -ESRCH; + if (!pgrp) + goto out_unlock; + retval = -EPERM; + if (session_of_pgrp(pgrp) != task_session(current)) + goto out_unlock; + retval = 0; + spin_lock_irq(&tty->ctrl_lock); + put_pid(real_tty->pgrp); + real_tty->pgrp = get_pid(pgrp); + spin_unlock_irq(&tty->ctrl_lock); +out_unlock: + rcu_read_unlock(); + return retval; +} + +/** + * tiocgsid - get session id + * @tty: tty passed by user + * @real_tty: tty side of the tty passed by the user if a pty else the tty + * @p: pointer to returned session id + * + * Obtain the session id of the tty. If there is no session + * return an error. + * + * Locking: none. Reference to current->signal->tty is safe. + */ +static int tiocgsid(struct tty_struct *tty, struct tty_struct *real_tty, pid_t __user *p) +{ + /* + * (tty == real_tty) is a cheap way of + * testing if the tty is NOT a master pty. + */ + if (tty == real_tty && current->signal->tty != real_tty) + return -ENOTTY; + if (!real_tty->session) + return -ENOTTY; + return put_user(pid_vnr(real_tty->session), p); +} + +/* + * Called from tty_ioctl(). If tty is a pty then real_tty is the slave side, + * if not then tty == real_tty. + */ +long tty_jobctrl_ioctl(struct tty_struct *tty, struct tty_struct *real_tty, + struct file *file, unsigned int cmd, unsigned long arg) +{ + void __user *p = (void __user *)arg; + + switch (cmd) { + case TIOCNOTTY: + if (current->signal->tty != tty) + return -ENOTTY; + no_tty(); + return 0; + case TIOCSCTTY: + return tiocsctty(real_tty, file, arg); + case TIOCGPGRP: + return tiocgpgrp(tty, real_tty, p); + case TIOCSPGRP: + return tiocspgrp(tty, real_tty, p); + case TIOCGSID: + return tiocgsid(tty, real_tty, p); + } + return -ENOIOCTLCMD; +} diff --git a/include/linux/tty.h b/include/linux/tty.h index f1106d7c73b6..d07cd2105a6c 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -475,9 +475,13 @@ extern int tty_do_resize(struct tty_struct *tty, struct winsize *ws); extern int is_current_pgrp_orphaned(void); extern void tty_hangup(struct tty_struct *tty); extern void tty_vhangup(struct tty_struct *tty); +extern void tty_vhangup_session(struct tty_struct *tty); extern int tty_hung_up_p(struct file *filp); extern void do_SAK(struct tty_struct *tty); extern void __do_SAK(struct tty_struct *tty); +extern void tty_open_proc_set_tty(struct file *filp, struct tty_struct *tty); +extern int tty_signal_session_leader(struct tty_struct *tty, int exit_session); +extern void session_clear_tty(struct pid *session); extern void no_tty(void); extern void tty_buffer_free_all(struct tty_port *port); extern void tty_buffer_flush(struct tty_struct *tty, struct tty_ldisc *ld); @@ -525,6 +529,8 @@ extern void tty_ldisc_flush(struct tty_struct *tty); extern long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg); extern int tty_mode_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg); +extern long tty_jobctrl_ioctl(struct tty_struct *tty, struct tty_struct *real_tty, + struct file *file, unsigned int cmd, unsigned long arg); extern int tty_perform_flush(struct tty_struct *tty, unsigned long arg); extern void tty_default_fops(struct file_operations *fops); extern struct tty_struct *alloc_tty_struct(struct tty_driver *driver, int idx); -- cgit v1.2.3 From 8e1c21f486944bf92f2a981f23ee811a45f5eaff Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Wed, 12 Apr 2017 18:37:17 -0400 Subject: serial: small Makefile reordering Move 21285 entry down alongside other UART drivers to be more consistent with the rest of the file. It is kept before 8250 though, to preserve the existing link ordering between those two. Signed-off-by: Nicolas Pitre Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/Makefile | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile index 2d6288bc4554..53c03e005132 100644 --- a/drivers/tty/serial/Makefile +++ b/drivers/tty/serial/Makefile @@ -3,7 +3,6 @@ # obj-$(CONFIG_SERIAL_CORE) += serial_core.o -obj-$(CONFIG_SERIAL_21285) += 21285.o obj-$(CONFIG_SERIAL_EARLYCON) += earlycon.o obj-$(CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST) += earlycon-arm-semihost.o @@ -17,6 +16,8 @@ obj-$(CONFIG_SERIAL_SUNZILOG) += sunzilog.o obj-$(CONFIG_SERIAL_SUNSU) += sunsu.o obj-$(CONFIG_SERIAL_SUNSAB) += sunsab.o +obj-$(CONFIG_SERIAL_21285) += 21285.o + # Now bring in any enabled 8250/16450/16550 type drivers. obj-$(CONFIG_SERIAL_8250) += 8250/ -- cgit v1.2.3