From 7486d6da09d4d76d49c68826c97578246936092b Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Thu, 14 Nov 2013 14:59:45 -0800 Subject: MAINTAINERS: Update file patterns in the lockdep and scheduler entries Propagate the file movement effects of the following commits: 7a6354e241d8 sched: Move wait.c into kernel/sched/ 8eddac3f1037 locking: Move the lockdep code to kernel/locking/ Signed-off-by: Joe Perches Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/1384469985.2897.32.camel@joe-AO722 Signed-off-by: Ingo Molnar --- MAINTAINERS | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index f3ef1d1f6029..3f85561f4a8b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5236,7 +5236,7 @@ S: Maintained F: Documentation/lockdep*.txt F: Documentation/lockstat.txt F: include/linux/lockdep.h -F: kernel/lockdep* +F: kernel/locking/ LOGICAL DISK MANAGER SUPPORT (LDM, Windows 2000/XP/Vista Dynamic Disks) M: "Richard Russon (FlatCap)" @@ -7361,7 +7361,6 @@ S: Maintained F: kernel/sched/ F: include/linux/sched.h F: include/uapi/linux/sched.h -F: kernel/wait.c F: include/linux/wait.h SCORE ARCHITECTURE -- cgit v1.2.3 From e0b35b89d8d150eeb12437159bf059acd34758e5 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Fri, 15 Nov 2013 15:43:27 +0800 Subject: spi: bcm2835: fix reference leak to master in bcm2835_spi_remove() Once a spi_master_get() call succeeds, we need an additional spi_master_put() call to free the memory, otherwise we will leak a reference to master. Fix by removing the unnecessary spi_master_get() call. Fixes: 247263dba208 ('spi: bcm2835: use devm_spi_register_master()') Signed-off-by: Wei Yongjun Signed-off-by: Mark Brown --- drivers/spi/spi-bcm2835.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/spi-bcm2835.c b/drivers/spi/spi-bcm2835.c index 4c332143a310..3c5aca8d677a 100644 --- a/drivers/spi/spi-bcm2835.c +++ b/drivers/spi/spi-bcm2835.c @@ -377,7 +377,7 @@ out_master_put: static int bcm2835_spi_remove(struct platform_device *pdev) { - struct spi_master *master = spi_master_get(platform_get_drvdata(pdev)); + struct spi_master *master = platform_get_drvdata(pdev); struct bcm2835_spi *bs = spi_master_get_devdata(master); free_irq(bs->irq, master); -- cgit v1.2.3 From 53063ec6e2cc38000f98a5de557b7e4fed186cfc Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Fri, 15 Nov 2013 15:44:02 +0800 Subject: spi: rspi: use platform drvdata correctly in rspi_remove() We had set the platform drvdata in rspi_probe() as a type of struct rspi_data, but use it as struct spi_master in rspi_remove() Fix by remove the unnecessary spi_master_[get|put]() since rspi->master is no longer used after spi_unregister_master(). Signed-off-by: Wei Yongjun Signed-off-by: Mark Brown --- drivers/spi/spi-rspi.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c index 58449ad4ad0d..9e829cee7357 100644 --- a/drivers/spi/spi-rspi.c +++ b/drivers/spi/spi-rspi.c @@ -885,14 +885,13 @@ static void rspi_release_dma(struct rspi_data *rspi) static int rspi_remove(struct platform_device *pdev) { - struct rspi_data *rspi = spi_master_get(platform_get_drvdata(pdev)); + struct rspi_data *rspi = platform_get_drvdata(pdev); spi_unregister_master(rspi->master); rspi_release_dma(rspi); free_irq(platform_get_irq(pdev, 0), rspi); clk_put(rspi->clk); iounmap(rspi->addr); - spi_master_put(rspi->master); return 0; } -- cgit v1.2.3 From a4469a429fc71af6bad9c9e3f7307249dedfe8d1 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Fri, 15 Nov 2013 15:48:56 +0800 Subject: spi: mpc512x: fix reference leak to master in mpc512x_psc_spi_do_remove() Once a spi_master_get() call succeeds, we need an additional spi_master_put() call to free the memory, otherwise we will leak a reference to master. Fix by removing the unnecessary spi_master_get() call. Fixes: eaa24297846b ('spi: mpc512x: use devm_spi_register_master()') Signed-off-by: Wei Yongjun Signed-off-by: Mark Brown --- drivers/spi/spi-mpc512x-psc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/spi-mpc512x-psc.c b/drivers/spi/spi-mpc512x-psc.c index ee6e61cbf7f5..e9f22a802cdb 100644 --- a/drivers/spi/spi-mpc512x-psc.c +++ b/drivers/spi/spi-mpc512x-psc.c @@ -556,7 +556,7 @@ free_master: static int mpc512x_psc_spi_do_remove(struct device *dev) { - struct spi_master *master = spi_master_get(dev_get_drvdata(dev)); + struct spi_master *master = dev_get_drvdata(dev); struct mpc512x_psc_spi *mps = spi_master_get_devdata(master); clk_disable_unprepare(mps->clk_mclk); -- cgit v1.2.3 From b38f87ec503ac68e5c38044101eedba869a56b0d Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Fri, 15 Nov 2013 15:49:29 +0800 Subject: spi: txx9: fix reference leak to master in txx9spi_remove() Once a spi_master_get() call succeeds, we need an additional spi_master_put() call to free the memory, otherwise we will leak a reference to master. Fix by removing the unnecessary spi_master_get() call. Fixes: 2fe7e4add3e5 ('spi: txx9: use devm_spi_register_master()') Signed-off-by: Wei Yongjun Signed-off-by: Mark Brown --- drivers/spi/spi-txx9.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/spi-txx9.c b/drivers/spi/spi-txx9.c index 637cce2b8bdd..18c9bb2b5f39 100644 --- a/drivers/spi/spi-txx9.c +++ b/drivers/spi/spi-txx9.c @@ -425,7 +425,7 @@ exit: static int txx9spi_remove(struct platform_device *dev) { - struct spi_master *master = spi_master_get(platform_get_drvdata(dev)); + struct spi_master *master = platform_get_drvdata(dev); struct txx9spi *c = spi_master_get_devdata(master); destroy_workqueue(c->workqueue); -- cgit v1.2.3 From ec3252687ae4ad0c3889010aee726c7a05606fe0 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Fri, 15 Nov 2013 15:50:59 +0800 Subject: spi: bcm63xx: fix reference leak to master in bcm63xx_spi_remove() Once a spi_master_get() call succeeds, we need an additional spi_master_put() call to free the memory, otherwise we will leak a reference to master. Fix by removing the unnecessary spi_master_get() call. Fixes: 247263dba208 ('spi: bcm63xx: use devm_spi_register_master()') Signed-off-by: Wei Yongjun Signed-off-by: Mark Brown --- drivers/spi/spi-bcm63xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c index 80d56b214eb5..469ecd876358 100644 --- a/drivers/spi/spi-bcm63xx.c +++ b/drivers/spi/spi-bcm63xx.c @@ -435,7 +435,7 @@ out: static int bcm63xx_spi_remove(struct platform_device *pdev) { - struct spi_master *master = spi_master_get(platform_get_drvdata(pdev)); + struct spi_master *master = platform_get_drvdata(pdev); struct bcm63xx_spi *bs = spi_master_get_devdata(master); /* reset spi block */ -- cgit v1.2.3 From 71bfae9097a94bb9a07afc6c16077429d3e40709 Mon Sep 17 00:00:00 2001 From: Stefano Stabellini Date: Fri, 15 Nov 2013 14:22:15 +0000 Subject: swiotlb-xen: add missing xen_dma_map_page call swiotlb-xen is missing a xen_dma_map_page call in xen_swiotlb_map_sg_attrs, in the bounce buffer path. Signed-off-by: Stefano Stabellini Acked-by: Konrad Rzeszutek Wilk --- drivers/xen/swiotlb-xen.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/xen/swiotlb-xen.c b/drivers/xen/swiotlb-xen.c index a224bc74b6b9..1eac0731c349 100644 --- a/drivers/xen/swiotlb-xen.c +++ b/drivers/xen/swiotlb-xen.c @@ -555,6 +555,11 @@ xen_swiotlb_map_sg_attrs(struct device *hwdev, struct scatterlist *sgl, sg_dma_len(sgl) = 0; return 0; } + xen_dma_map_page(hwdev, pfn_to_page(map >> PAGE_SHIFT), + map & ~PAGE_MASK, + sg->length, + dir, + attrs); sg->dma_address = xen_phys_to_bus(map); } else { /* we are not interested in the dma_addr returned by -- cgit v1.2.3 From e322ce9365693b417867f6bd700ddf09cca36b37 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Fri, 15 Nov 2013 15:50:31 +0800 Subject: spi: spi-mxs: fix reference leak to master in mxs_spi_remove() Once a spi_master_get() call succeeds, we need an additional spi_master_put() call to free the memory, otherwise we will leak a reference to master. Fix by removing the unnecessary spi_master_get() call. Fixes: 33e195acf268 ('spi: mxs: use devm_spi_register_master()') Signed-off-by: Wei Yongjun Signed-off-by: Mark Brown --- drivers/spi/spi-mxs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/spi-mxs.c b/drivers/spi/spi-mxs.c index de333059a9a7..37b3e41bf46f 100644 --- a/drivers/spi/spi-mxs.c +++ b/drivers/spi/spi-mxs.c @@ -565,7 +565,7 @@ static int mxs_spi_remove(struct platform_device *pdev) struct mxs_spi *spi; struct mxs_ssp *ssp; - master = spi_master_get(platform_get_drvdata(pdev)); + master = platform_get_drvdata(pdev); spi = spi_master_get_devdata(master); ssp = &spi->ssp; -- cgit v1.2.3 From c8999a889f466bd4e4db45337a43b8544b91c550 Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Mon, 18 Nov 2013 08:48:07 -0500 Subject: arm/xen: Export phys_to_mach to fix Xen module link errors Various xen drivers fail to link when built as modules with the following error: ERROR: "phys_to_mach" [drivers/xen/xen-gntalloc.ko] undefined! ERROR: "phys_to_mach" [drivers/net/xen-netfront.ko] undefined! ERROR: "phys_to_mach" [drivers/net/xen-netback/xen-netback.ko] undefined! ERROR: "phys_to_mach" [drivers/block/xen-blkfront.ko] undefined! The mfn_to_pfn and pfn_to_mfn functions get inlined in these modules and those functions require phys_to_mach. Export the symbol to fix the link errors. Signed-off-by: Josh Boyer Signed-off-by: Stefano Stabellini --- arch/arm/xen/p2m.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/xen/p2m.c b/arch/arm/xen/p2m.c index 23732cdff551..0f842e858790 100644 --- a/arch/arm/xen/p2m.c +++ b/arch/arm/xen/p2m.c @@ -27,6 +27,7 @@ struct xen_p2m_entry { rwlock_t p2m_lock; struct rb_root phys_to_mach = RB_ROOT; +EXPORT_SYMBOL_GPL(phys_to_mach); static struct rb_root mach_to_phys = RB_ROOT; static int xen_add_phys_to_mach_entry(struct xen_p2m_entry *new) -- cgit v1.2.3 From f9c7ec1649607d68a47ab99e2ebb3379a2016157 Mon Sep 17 00:00:00 2001 From: Stefano Stabellini Date: Sun, 17 Nov 2013 16:31:34 +0000 Subject: xen/arm: p2m_init and p2m_lock should be static Signed-off-by: Stefano Stabellini --- arch/arm/xen/p2m.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/xen/p2m.c b/arch/arm/xen/p2m.c index 0f842e858790..b31ee1b275b0 100644 --- a/arch/arm/xen/p2m.c +++ b/arch/arm/xen/p2m.c @@ -25,7 +25,7 @@ struct xen_p2m_entry { struct rb_node rbnode_phys; }; -rwlock_t p2m_lock; +static rwlock_t p2m_lock; struct rb_root phys_to_mach = RB_ROOT; EXPORT_SYMBOL_GPL(phys_to_mach); static struct rb_root mach_to_phys = RB_ROOT; @@ -201,7 +201,7 @@ bool __set_phys_to_machine(unsigned long pfn, unsigned long mfn) } EXPORT_SYMBOL_GPL(__set_phys_to_machine); -int p2m_init(void) +static int p2m_init(void) { rwlock_init(&p2m_lock); return 0; -- cgit v1.2.3 From a5285ad9e30fd90b88a11adcab97bd4c3ffe44eb Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Sat, 16 Nov 2013 02:02:09 +0100 Subject: perf tools: Tag thread comm as overriden The problem is that when a thread overrides its default ":%pid" comm, we forget to tag the thread comm as overriden. Hence, this overriden comm is not inherited on future forks. Fix it. Signed-off-by: Frederic Weisbecker Tested-by: David Ahern Acked-by: Namhyung Kim Cc: David Ahern Cc: Ingo Molnar Cc: Namhyung Kim Link: http://lkml.kernel.org/r/20131116010207.GA18855@localhost.localdomain Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/thread.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/tools/perf/util/thread.c b/tools/perf/util/thread.c index cd8e2f592719..49eaf1d7d89d 100644 --- a/tools/perf/util/thread.c +++ b/tools/perf/util/thread.c @@ -70,14 +70,13 @@ int thread__set_comm(struct thread *thread, const char *str, u64 timestamp) /* Override latest entry if it had no specific time coverage */ if (!curr->start) { comm__override(curr, str, timestamp); - return 0; + } else { + new = comm__new(str, timestamp); + if (!new) + return -ENOMEM; + list_add(&new->list, &thread->comm_list); } - new = comm__new(str, timestamp); - if (!new) - return -ENOMEM; - - list_add(&new->list, &thread->comm_list); thread->comm_set = true; return 0; -- cgit v1.2.3 From 210e812f036736aeda097d9a6ef84b1f2b334bae Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Mon, 18 Nov 2013 11:20:43 +0900 Subject: perf header: Fix bogus group name When processing event group descriptor in perf file header, we reuse an allocated group name but forgot to prevent it from freeing. Reported-by: Stephane Eranian Signed-off-by: Namhyung Kim Cc: Ingo Molnar Cc: Jiri Olsa Cc: Paul Mackerras Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/1384741244-7271-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/header.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c index 369c03648f88..559c516f1cec 100644 --- a/tools/perf/util/header.c +++ b/tools/perf/util/header.c @@ -2078,8 +2078,10 @@ static int process_group_desc(struct perf_file_section *section __maybe_unused, if (evsel->idx == (int) desc[i].leader_idx) { evsel->leader = evsel; /* {anon_group} is a dummy name */ - if (strcmp(desc[i].name, "{anon_group}")) + if (strcmp(desc[i].name, "{anon_group}")) { evsel->group_name = desc[i].name; + desc[i].name = NULL; + } evsel->nr_members = desc[i].nr_members; if (i >= nr_groups || nr > 0) { -- cgit v1.2.3 From 50a2740b839ece03b305facd3fc07cdc3b74247c Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Mon, 18 Nov 2013 11:20:44 +0900 Subject: perf header: Fix possible memory leaks in process_group_desc() After processing all group descriptors or encountering an error, it frees all descriptors. However, current logic can leak memory since it might not traverse all descriptors. Note that the 'i' can have different value than nr_groups when an error occurred and it's safe to call free(desc[i].name) for every desc since we already make it NULL when it's reused for group names. Signed-off-by: Namhyung Kim Cc: Ingo Molnar Cc: Jiri Olsa Cc: Paul Mackerras Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/1384741244-7271-2-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/header.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c index 559c516f1cec..1cd035708931 100644 --- a/tools/perf/util/header.c +++ b/tools/perf/util/header.c @@ -2107,7 +2107,7 @@ static int process_group_desc(struct perf_file_section *section __maybe_unused, ret = 0; out_free: - while ((int) --i >= 0) + for (i = 0; i < nr_groups; i++) free(desc[i].name); free(desc); -- cgit v1.2.3 From eff2c92f86c2ac2a0eab3749d58be39592293c3a Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 18 Nov 2013 14:23:14 -0500 Subject: tools lib traceevent: Fix use of multiple options in processing field Jiri Olsa reported that the scsi_dispatch_cmd_done event failed to parse with: Error: expected type 5 but read 4 Error: expected type 5 but read 4 The problem is with this part of the print_fmt: __print_symbolic(((REC->result) >> 24) & 0xff, ... The __print_symbolic() helper function's first parameter is the field to use to determine what symbol to print based on the value of the result. The parser can handle one operation, but it can not handle multiple operations ('>>' and '&'). Add code to process all operations for the field argument for __print_symbolic() as well as __print_flags(). Reported-by: Jiri Olsa Signed-off-by: Steven Rostedt Cc: Frederic Weisbecker Cc: Ingo Molnar Cc: Jiri Olsa Cc: Namhyung Kim Link: http://lkml.kernel.org/r/20131118142314.27ca334b@gandalf.local.home Signed-off-by: Arnaldo Carvalho de Melo --- tools/lib/traceevent/event-parse.c | 23 +++++++++++++++++++++-- 1 file changed, 21 insertions(+), 2 deletions(-) diff --git a/tools/lib/traceevent/event-parse.c b/tools/lib/traceevent/event-parse.c index 0362d575de7d..8a5b65df6efb 100644 --- a/tools/lib/traceevent/event-parse.c +++ b/tools/lib/traceevent/event-parse.c @@ -1606,6 +1606,24 @@ process_arg(struct event_format *event, struct print_arg *arg, char **tok) static enum event_type process_op(struct event_format *event, struct print_arg *arg, char **tok); +/* + * For __print_symbolic() and __print_flags, we need to completely + * evaluate the first argument, which defines what to print next. + */ +static enum event_type +process_field_arg(struct event_format *event, struct print_arg *arg, char **tok) +{ + enum event_type type; + + type = process_arg(event, arg, tok); + + while (type == EVENT_OP) { + type = process_op(event, arg, tok); + } + + return type; +} + static enum event_type process_cond(struct event_format *event, struct print_arg *top, char **tok) { @@ -2371,7 +2389,7 @@ process_flags(struct event_format *event, struct print_arg *arg, char **tok) goto out_free; } - type = process_arg(event, field, &token); + type = process_field_arg(event, field, &token); /* Handle operations in the first argument */ while (type == EVENT_OP) @@ -2424,7 +2442,8 @@ process_symbols(struct event_format *event, struct print_arg *arg, char **tok) goto out_free; } - type = process_arg(event, field, &token); + type = process_field_arg(event, field, &token); + if (test_type_token(type, token, EVENT_DELIM, ",")) goto out_free_field; -- cgit v1.2.3 From d689fe222a858c767cb8594faf280048e532b53f Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 13 Nov 2013 21:01:57 +0100 Subject: NOHZ: Check for nohz active instead of nohz enabled RCU and the fine grained idle time accounting functions check tick_nohz_enabled. But that variable is merily telling that NOHZ has been enabled in the config and not been disabled on the command line. But it does not tell anything about nohz being active. That's what all this should check for. Matthew reported, that the idle accounting on his old P1 machine showed bogus values, when he enabled NOHZ in the config and did not disable it on the kernel command line. The reason is that his machine uses (refined) jiffies as a clocksource which explains why the "fine" grained accounting went into lala land, because it depends on when the system goes and leaves idle relative to the jiffies increment. Provide a tick_nohz_active indicator and let RCU and the accounting code use this instead of tick_nohz_enable. Reported-and-tested-by: Matthew Whitehead Signed-off-by: Thomas Gleixner Reviewed-by: Steven Rostedt Reviewed-by: Paul E. McKenney Cc: john.stultz@linaro.org Cc: mwhitehe@redhat.com Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1311132052240.30673@ionos.tec.linutronix.de --- kernel/rcu/tree_plugin.h | 4 ++-- kernel/time/tick-sched.c | 21 +++++++++------------ 2 files changed, 11 insertions(+), 14 deletions(-) diff --git a/kernel/rcu/tree_plugin.h b/kernel/rcu/tree_plugin.h index 6abb03dff5c0..08a765232432 100644 --- a/kernel/rcu/tree_plugin.h +++ b/kernel/rcu/tree_plugin.h @@ -1632,7 +1632,7 @@ module_param(rcu_idle_gp_delay, int, 0644); static int rcu_idle_lazy_gp_delay = RCU_IDLE_LAZY_GP_DELAY; module_param(rcu_idle_lazy_gp_delay, int, 0644); -extern int tick_nohz_enabled; +extern int tick_nohz_active; /* * Try to advance callbacks for all flavors of RCU on the current CPU, but @@ -1729,7 +1729,7 @@ static void rcu_prepare_for_idle(int cpu) int tne; /* Handle nohz enablement switches conservatively. */ - tne = ACCESS_ONCE(tick_nohz_enabled); + tne = ACCESS_ONCE(tick_nohz_active); if (tne != rdtp->tick_nohz_enabled_snap) { if (rcu_cpu_has_callbacks(cpu, NULL)) invoke_rcu_core(); /* force nohz to see update. */ diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c index 3612fc77f834..a12df5abde0b 100644 --- a/kernel/time/tick-sched.c +++ b/kernel/time/tick-sched.c @@ -361,8 +361,8 @@ void __init tick_nohz_init(void) /* * NO HZ enabled ? */ -int tick_nohz_enabled __read_mostly = 1; - +static int tick_nohz_enabled __read_mostly = 1; +int tick_nohz_active __read_mostly; /* * Enable / Disable tickless mode */ @@ -465,7 +465,7 @@ u64 get_cpu_idle_time_us(int cpu, u64 *last_update_time) struct tick_sched *ts = &per_cpu(tick_cpu_sched, cpu); ktime_t now, idle; - if (!tick_nohz_enabled) + if (!tick_nohz_active) return -1; now = ktime_get(); @@ -506,7 +506,7 @@ u64 get_cpu_iowait_time_us(int cpu, u64 *last_update_time) struct tick_sched *ts = &per_cpu(tick_cpu_sched, cpu); ktime_t now, iowait; - if (!tick_nohz_enabled) + if (!tick_nohz_active) return -1; now = ktime_get(); @@ -799,11 +799,6 @@ void tick_nohz_idle_enter(void) local_irq_disable(); ts = &__get_cpu_var(tick_cpu_sched); - /* - * set ts->inidle unconditionally. even if the system did not - * switch to nohz mode the cpu frequency governers rely on the - * update of the idle time accounting in tick_nohz_start_idle(). - */ ts->inidle = 1; __tick_nohz_idle_enter(ts); @@ -973,7 +968,7 @@ static void tick_nohz_switch_to_nohz(void) struct tick_sched *ts = &__get_cpu_var(tick_cpu_sched); ktime_t next; - if (!tick_nohz_enabled) + if (!tick_nohz_active) return; local_irq_disable(); @@ -981,7 +976,7 @@ static void tick_nohz_switch_to_nohz(void) local_irq_enable(); return; } - + tick_nohz_active = 1; ts->nohz_mode = NOHZ_MODE_LOWRES; /* @@ -1139,8 +1134,10 @@ void tick_setup_sched_timer(void) } #ifdef CONFIG_NO_HZ_COMMON - if (tick_nohz_enabled) + if (tick_nohz_enabled) { ts->nohz_mode = NOHZ_MODE_HIGHRES; + tick_nohz_active = 1; + } #endif } #endif /* HIGH_RES_TIMERS */ -- cgit v1.2.3 From da554eba2e68c8ec051977db5ee1f42d384a01ed Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Fri, 15 Nov 2013 14:15:31 -0800 Subject: timer: Convert kmalloc_node(...GFP_ZERO...) to kzalloc_node(...) Use the helper function instead of __GFP_ZERO. Signed-off-by: Joe Perches Signed-off-by: Andrew Morton Signed-off-by: Thomas Gleixner --- kernel/timer.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/kernel/timer.c b/kernel/timer.c index 6582b82fa966..accfd241b9e5 100644 --- a/kernel/timer.c +++ b/kernel/timer.c @@ -1518,9 +1518,8 @@ static int init_timers_cpu(int cpu) /* * The APs use this path later in boot */ - base = kmalloc_node(sizeof(*base), - GFP_KERNEL | __GFP_ZERO, - cpu_to_node(cpu)); + base = kzalloc_node(sizeof(*base), GFP_KERNEL, + cpu_to_node(cpu)); if (!base) return -ENOMEM; -- cgit v1.2.3 From 050ded1bbaea3331745cf2782315f5bc2582d083 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Fri, 15 Nov 2013 14:15:33 -0800 Subject: tick: Document tick_do_timer_cpu Taken straight from a tglx email ;) Signed-off-by: Andrew Morton Signed-off-by: Thomas Gleixner --- kernel/time/tick-common.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/kernel/time/tick-common.c b/kernel/time/tick-common.c index 64522ecdfe0e..162b03ab0ad2 100644 --- a/kernel/time/tick-common.c +++ b/kernel/time/tick-common.c @@ -33,6 +33,21 @@ DEFINE_PER_CPU(struct tick_device, tick_cpu_device); */ ktime_t tick_next_period; ktime_t tick_period; + +/* + * tick_do_timer_cpu is a timer core internal variable which holds the CPU NR + * which is responsible for calling do_timer(), i.e. the timekeeping stuff. This + * variable has two functions: + * + * 1) Prevent a thundering herd issue of a gazillion of CPUs trying to grab the + * timekeeping lock all at once. Only the CPU which is assigned to do the + * update is handling it. + * + * 2) Hand off the duty in the NOHZ idle case by setting the value to + * TICK_DO_TIMER_NONE, i.e. a non existing CPU. So the next cpu which looks + * at it will take over and keep the time keeping alive. The handover + * procedure also covers cpu hotplug. + */ int tick_do_timer_cpu __read_mostly = TICK_DO_TIMER_BOOT; /* -- cgit v1.2.3 From d5b5f391d434c5cc8bcb1ab2d759738797b85f52 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 14 Nov 2013 16:23:04 +0100 Subject: ftrace, perf: Avoid infinite event generation loop Vince's perf-trinity fuzzer found yet another 'interesting' problem. When we sample the irq_work_exit tracepoint with period==1 (or PERF_SAMPLE_PERIOD) and we add an fasync SIGNAL handler we create an infinite event generation loop: ,-> | irq_work_exit() -> | trace_irq_work_exit() -> | ... | __perf_event_overflow() -> (due to fasync) | irq_work_queue() -> (irq_work_list must be empty) '--------- arch_irq_work_raise() Similar things can happen due to regular poll() wakeups if we exceed the ring-buffer wakeup watermark, or have an event_limit. To avoid this, dis-allow sampling this particular tracepoint. In order to achieve this, create a special perf_perm function pointer for each event and call this (when set) on trying to create a tracepoint perf event. [ roasted: use expr... to allow for ',' in your expression ] Reported-by: Vince Weaver Tested-by: Vince Weaver Signed-off-by: Peter Zijlstra Cc: Steven Rostedt Cc: Dave Jones Cc: Frederic Weisbecker Link: http://lkml.kernel.org/r/20131114152304.GC5364@laptop.programming.kicks-ass.net Signed-off-by: Ingo Molnar --- arch/x86/include/asm/trace/irq_vectors.h | 11 +++++++++++ include/linux/ftrace_event.h | 16 ++++++++++++++++ include/linux/tracepoint.h | 4 ++++ include/trace/ftrace.h | 7 +++++++ kernel/trace/trace_event_perf.c | 6 ++++++ 5 files changed, 44 insertions(+) diff --git a/arch/x86/include/asm/trace/irq_vectors.h b/arch/x86/include/asm/trace/irq_vectors.h index 2874df24e7a4..4cab890007a7 100644 --- a/arch/x86/include/asm/trace/irq_vectors.h +++ b/arch/x86/include/asm/trace/irq_vectors.h @@ -71,6 +71,17 @@ DEFINE_IRQ_VECTOR_EVENT(x86_platform_ipi); */ DEFINE_IRQ_VECTOR_EVENT(irq_work); +/* + * We must dis-allow sampling irq_work_exit() because perf event sampling + * itself can cause irq_work, which would lead to an infinite loop; + * + * 1) irq_work_exit happens + * 2) generates perf sample + * 3) generates irq_work + * 4) goto 1 + */ +TRACE_EVENT_PERF_PERM(irq_work_exit, is_sampling_event(p_event) ? -EPERM : 0); + /* * call_function - called when entering/exiting a call function interrupt * vector handler diff --git a/include/linux/ftrace_event.h b/include/linux/ftrace_event.h index 9abbe630c456..8c9b7a1c4138 100644 --- a/include/linux/ftrace_event.h +++ b/include/linux/ftrace_event.h @@ -248,6 +248,9 @@ struct ftrace_event_call { #ifdef CONFIG_PERF_EVENTS int perf_refcount; struct hlist_head __percpu *perf_events; + + int (*perf_perm)(struct ftrace_event_call *, + struct perf_event *); #endif }; @@ -317,6 +320,19 @@ struct ftrace_event_file { } \ early_initcall(trace_init_flags_##name); +#define __TRACE_EVENT_PERF_PERM(name, expr...) \ + static int perf_perm_##name(struct ftrace_event_call *tp_event, \ + struct perf_event *p_event) \ + { \ + return ({ expr; }); \ + } \ + static int __init trace_init_perf_perm_##name(void) \ + { \ + event_##name.perf_perm = &perf_perm_##name; \ + return 0; \ + } \ + early_initcall(trace_init_perf_perm_##name); + #define PERF_MAX_TRACE_SIZE 2048 #define MAX_FILTER_STR_VAL 256 /* Should handle KSYM_SYMBOL_LEN */ diff --git a/include/linux/tracepoint.h b/include/linux/tracepoint.h index ebeab360d851..f16dc0a40049 100644 --- a/include/linux/tracepoint.h +++ b/include/linux/tracepoint.h @@ -267,6 +267,8 @@ static inline void tracepoint_synchronize_unregister(void) #define TRACE_EVENT_FLAGS(event, flag) +#define TRACE_EVENT_PERF_PERM(event, expr...) + #endif /* DECLARE_TRACE */ #ifndef TRACE_EVENT @@ -399,4 +401,6 @@ static inline void tracepoint_synchronize_unregister(void) #define TRACE_EVENT_FLAGS(event, flag) +#define TRACE_EVENT_PERF_PERM(event, expr...) + #endif /* ifdef TRACE_EVENT (see note above) */ diff --git a/include/trace/ftrace.h b/include/trace/ftrace.h index 52594b20179e..6b852f60f8ae 100644 --- a/include/trace/ftrace.h +++ b/include/trace/ftrace.h @@ -90,6 +90,10 @@ #define TRACE_EVENT_FLAGS(name, value) \ __TRACE_EVENT_FLAGS(name, value) +#undef TRACE_EVENT_PERF_PERM +#define TRACE_EVENT_PERF_PERM(name, expr...) \ + __TRACE_EVENT_PERF_PERM(name, expr) + #include TRACE_INCLUDE(TRACE_INCLUDE_FILE) @@ -140,6 +144,9 @@ #undef TRACE_EVENT_FLAGS #define TRACE_EVENT_FLAGS(event, flag) +#undef TRACE_EVENT_PERF_PERM +#define TRACE_EVENT_PERF_PERM(event, expr...) + #include TRACE_INCLUDE(TRACE_INCLUDE_FILE) /* diff --git a/kernel/trace/trace_event_perf.c b/kernel/trace/trace_event_perf.c index 78e27e3b52ac..630889f68b1d 100644 --- a/kernel/trace/trace_event_perf.c +++ b/kernel/trace/trace_event_perf.c @@ -24,6 +24,12 @@ static int total_ref_count; static int perf_trace_event_perm(struct ftrace_event_call *tp_event, struct perf_event *p_event) { + if (tp_event->perf_perm) { + int ret = tp_event->perf_perm(tp_event, p_event); + if (ret) + return ret; + } + /* The ftrace function trace is allowed only for root. */ if (ftrace_event_is_function(tp_event) && perf_paranoid_tracepoint_raw() && !capable(CAP_SYS_ADMIN)) -- cgit v1.2.3 From 06db0b21712f878b808480ef31097637013bbf0f Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 13 Sep 2013 13:14:47 +0200 Subject: perf: Remove fragile swevent hlist optimization Currently we only allocate a single cpu hashtable for per-cpu swevents; do away with this optimization for it is fragile in the face of things like perf_pmu_migrate_context(). The easiest thing is to make sure all CPUs are consistent wrt state. Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/20130913111447.GN31370@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar --- kernel/events/core.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/kernel/events/core.c b/kernel/events/core.c index d724e7757cd1..72348dc192c1 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -5680,11 +5680,6 @@ static void swevent_hlist_put(struct perf_event *event) { int cpu; - if (event->cpu != -1) { - swevent_hlist_put_cpu(event, event->cpu); - return; - } - for_each_possible_cpu(cpu) swevent_hlist_put_cpu(event, cpu); } @@ -5718,9 +5713,6 @@ static int swevent_hlist_get(struct perf_event *event) int err; int cpu, failed_cpu; - if (event->cpu != -1) - return swevent_hlist_get_cpu(event, event->cpu); - get_online_cpus(); for_each_possible_cpu(cpu) { err = swevent_hlist_get_cpu(event, cpu); -- cgit v1.2.3 From 0022cedd4a7d8a87841351e2b018bb6794cf2e67 Mon Sep 17 00:00:00 2001 From: Vince Weaver Date: Fri, 15 Nov 2013 12:39:45 -0500 Subject: perf/trace: Properly use u64 to hold event_id The 64-bit attr.config value for perf trace events was being copied into an "int" before doing a comparison, meaning the top 32 bits were being truncated. As far as I can tell this didn't cause any errors, but it did mean it was possible to create valid aliases for all the tracepoint ids which I don't think was intended. (For example, 0xffffffff00000018 and 0x18 both enable the same tracepoint). Signed-off-by: Vince Weaver Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1311151236100.11932@vincent-weaver-1.um.maine.edu Signed-off-by: Ingo Molnar --- kernel/trace/trace_event_perf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/trace/trace_event_perf.c b/kernel/trace/trace_event_perf.c index 630889f68b1d..e854f420e033 100644 --- a/kernel/trace/trace_event_perf.c +++ b/kernel/trace/trace_event_perf.c @@ -179,7 +179,7 @@ static int perf_trace_event_init(struct ftrace_event_call *tp_event, int perf_trace_init(struct perf_event *p_event) { struct ftrace_event_call *tp_event; - int event_id = p_event->attr.config; + u64 event_id = p_event->attr.config; int ret = -EINVAL; mutex_lock(&event_mutex); -- cgit v1.2.3 From 9abf24d465180f5f2eb26a43545348262f16b771 Mon Sep 17 00:00:00 2001 From: Srikar Dronamraju Date: Tue, 12 Nov 2013 22:11:26 +0530 Subject: sched: Check sched_domain before computing group power After commit 863bffc80898 ("sched/fair: Fix group power_orig computation"), we can dereference rq->sd before it is set. Fix this by falling back to power_of() in this case and add a comment explaining things. Signed-off-by: Srikar Dronamraju [ Added comment and tweaked patch. ] Signed-off-by: Peter Zijlstra Cc: mikey@neuling.org Link: http://lkml.kernel.org/r/20131113151718.GN21461@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar --- kernel/sched/fair.c | 27 ++++++++++++++++++++++++--- 1 file changed, 24 insertions(+), 3 deletions(-) diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c index e8b652ebe027..fd773ade1a31 100644 --- a/kernel/sched/fair.c +++ b/kernel/sched/fair.c @@ -5379,10 +5379,31 @@ void update_group_power(struct sched_domain *sd, int cpu) */ for_each_cpu(cpu, sched_group_cpus(sdg)) { - struct sched_group *sg = cpu_rq(cpu)->sd->groups; + struct sched_group_power *sgp; + struct rq *rq = cpu_rq(cpu); - power_orig += sg->sgp->power_orig; - power += sg->sgp->power; + /* + * build_sched_domains() -> init_sched_groups_power() + * gets here before we've attached the domains to the + * runqueues. + * + * Use power_of(), which is set irrespective of domains + * in update_cpu_power(). + * + * This avoids power/power_orig from being 0 and + * causing divide-by-zero issues on boot. + * + * Runtime updates will correct power_orig. + */ + if (unlikely(!rq->sd)) { + power_orig += power_of(cpu); + power += power_of(cpu); + continue; + } + + sgp = rq->sd->groups->sgp; + power_orig += sgp->power_orig; + power += sgp->power; } } else { /* -- cgit v1.2.3 From 42eb088ed246a5a817bb45a8b32fe234cf1c0f8b Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Tue, 19 Nov 2013 16:41:49 +0100 Subject: sched: Avoid NULL dereference on sd_busy Commit 37dc6b50cee9 ("sched: Remove unnecessary iteration over sched domains to update nr_busy_cpus") forgot to clear 'sd_busy' under some conditions leading to a possible NULL deref in set_cpu_sd_state_idle(). Reported-by: Anton Blanchard Cc: Preeti U Murthy Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/20131118113701.GF3866@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar --- kernel/sched/core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/sched/core.c b/kernel/sched/core.c index c1808606ee5f..a1591ca7eb5a 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -4910,8 +4910,9 @@ static void update_top_cache_domain(int cpu) if (sd) { id = cpumask_first(sched_domain_span(sd)); size = cpumask_weight(sched_domain_span(sd)); - rcu_assign_pointer(per_cpu(sd_busy, cpu), sd->parent); + sd = sd->parent; /* sd_busy */ } + rcu_assign_pointer(per_cpu(sd_busy, cpu), sd); rcu_assign_pointer(per_cpu(sd_llc, cpu), sd); per_cpu(sd_llc_size, cpu) = size; -- cgit v1.2.3 From b972fc308c2763096b61b62169f2167ee0ca5a19 Mon Sep 17 00:00:00 2001 From: Alex Shi Date: Tue, 19 Nov 2013 17:21:52 +0800 Subject: sched: Remove unused variable in 'struct sched_domain' The 'u64 last_update' variable isn't used now, remove it to save a bit of space. Signed-off-by: Alex Shi Signed-off-by: Peter Zijlstra Cc: Morten.Rasmussen@arm.com Cc: linaro-kernel@lists.linaro.org Link: http://lkml.kernel.org/r/1384852912-24791-1-git-send-email-alex.shi@linaro.org Signed-off-by: Ingo Molnar --- include/linux/sched.h | 2 -- 1 file changed, 2 deletions(-) diff --git a/include/linux/sched.h b/include/linux/sched.h index f7efc8604652..b122395bf5f4 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -823,8 +823,6 @@ struct sched_domain { unsigned int balance_interval; /* initialise to 1. units in ms. */ unsigned int nr_balance_failed; /* initialise to 0 */ - u64 last_update; - /* idle_balance() stats */ u64 max_newidle_lb_cost; unsigned long next_decay_max_lb_cost; -- cgit v1.2.3 From 0515973ffb16c2852a1bb1df2ca1456556faaaa5 Mon Sep 17 00:00:00 2001 From: Shigeru Yoshida Date: Sun, 17 Nov 2013 12:12:36 +0900 Subject: sched: Fix a trivial typo in comments Fix a trivial typo in rq_attach_root(). Signed-off-by: Shigeru Yoshida Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/20131117.121236.1990617639803941055.shigeru.yoshida@gmail.com Signed-off-by: Ingo Molnar --- kernel/sched/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/sched/core.c b/kernel/sched/core.c index a1591ca7eb5a..718730dd0480 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -4762,7 +4762,7 @@ static void rq_attach_root(struct rq *rq, struct root_domain *rd) cpumask_clear_cpu(rq->cpu, old_rd->span); /* - * If we dont want to free the old_rt yet then + * If we dont want to free the old_rd yet then * set old_rd to NULL to skip the freeing later * in this function: */ -- cgit v1.2.3 From 6bab2c613d7fa70bb8514f89ab7455ede717142b Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 15 Nov 2013 14:15:07 -0800 Subject: genirq: Correct fuzzy and fragile IRQ_RETVAL() definition commit bedd30d986a0 ("genirq: make irqreturn_t an enum") blindly replaced "0" by "IRQ_NONE" in the "IRQ_RETVAL(x)" macro definition. However, as "x" is a condition, "0" meant "boolean false", not an irqreturn_t value. All of this worked, and kept working after the addition of IRQ_WAKE_THREAD, as - both "boolean false" and "IRQ_NONE" are "0" (for the comparison), - "boolean true" and "boolean false" nicely map to the correct values of "IRQ_HANDLED" and "IRQ_NONE" (for the return value). Correct the macro definition for clarity and future-proofness. Signed-off-by: Geert Uytterhoeven Signed-off-by: Andrew Morton Signed-off-by: Thomas Gleixner --- include/linux/irqreturn.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/irqreturn.h b/include/linux/irqreturn.h index 714ba08dc092..e374e369fb2f 100644 --- a/include/linux/irqreturn.h +++ b/include/linux/irqreturn.h @@ -14,6 +14,6 @@ enum irqreturn { }; typedef enum irqreturn irqreturn_t; -#define IRQ_RETVAL(x) ((x) != IRQ_NONE) +#define IRQ_RETVAL(x) ((x) ? IRQ_HANDLED : IRQ_NONE) #endif -- cgit v1.2.3 From 6b5fa0ba4f85a8499287aefaf3f1375450c40c6d Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Tue, 19 Nov 2013 16:14:51 -0300 Subject: tools lib traceevent: Fix conversion of pointer to integer of different size MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit gcc complaint on 32-bit system: /home/acme/git/linux/tools/lib/traceevent/event-parse.c: In function ‘eval_num_arg’: /home/acme/git/linux/tools/lib/traceevent/event-parse.c:3468:9: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] This is because the eval_num_arg returns everything as an 'unsigned long long', so it converts a void pointer to a wider integer, fix it by converting the void pointer to an integer of the same size, 'unsigned long', before casting it to 'unsigned long long'. Acked-by: Steven Rostedt Cc: Adrian Hunter Cc: David Ahern Cc: Frederic Weisbecker Cc: Jiri Olsa Cc: Mike Galbraith Cc: Namhyung Kim Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Link: http://lkml.kernel.org/n/tip-yllx4aqcg06v5n4vjpwiiuld@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/lib/traceevent/event-parse.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/lib/traceevent/event-parse.c b/tools/lib/traceevent/event-parse.c index 8a5b65df6efb..217c82ee3665 100644 --- a/tools/lib/traceevent/event-parse.c +++ b/tools/lib/traceevent/event-parse.c @@ -3465,7 +3465,7 @@ eval_num_arg(void *data, int size, struct event_format *event, struct print_arg * is in the bottom half of the 32 bit field. */ offset &= 0xffff; - val = (unsigned long long)(data + offset); + val = (unsigned long long)((unsigned long)data + offset); break; default: /* not sure what to do there */ return 0; -- cgit v1.2.3 From 694e096fd7c2a7d40760fc9c9dfc826bdd495ea4 Mon Sep 17 00:00:00 2001 From: Anna Schumaker Date: Wed, 13 Nov 2013 12:29:08 -0500 Subject: NFS: Enabling v4.2 should not recompile nfsd and lockd When CONFIG_NFS_V4_2 is toggled nfsd and lockd will be recompiled, instead of only the nfs client. This patch moves a small amount of code into the client directory to avoid unnecessary recompiles. Signed-off-by: Anna Schumaker Signed-off-by: Trond Myklebust --- fs/nfs/blocklayout/blocklayout.h | 1 + fs/nfs/dns_resolve.c | 2 ++ fs/nfs/internal.h | 15 +++++++++++++++ fs/nfs/nfs4_fs.h | 8 ++++++++ include/linux/nfs4.h | 10 ---------- include/linux/nfs_fs.h | 18 ------------------ 6 files changed, 26 insertions(+), 28 deletions(-) diff --git a/fs/nfs/blocklayout/blocklayout.h b/fs/nfs/blocklayout/blocklayout.h index 8485978993e8..9838fb020473 100644 --- a/fs/nfs/blocklayout/blocklayout.h +++ b/fs/nfs/blocklayout/blocklayout.h @@ -36,6 +36,7 @@ #include #include +#include "../nfs4_fs.h" #include "../pnfs.h" #include "../netns.h" diff --git a/fs/nfs/dns_resolve.c b/fs/nfs/dns_resolve.c index fc0f95ec7358..d25f10fb4926 100644 --- a/fs/nfs/dns_resolve.c +++ b/fs/nfs/dns_resolve.c @@ -46,7 +46,9 @@ ssize_t nfs_dns_resolve_name(struct net *net, char *name, size_t namelen, #include #include #include +#include +#include "nfs4_fs.h" #include "dns_resolve.h" #include "cache_lib.h" #include "netns.h" diff --git a/fs/nfs/internal.h b/fs/nfs/internal.h index bca6a3e3c49c..8b5cc04a8611 100644 --- a/fs/nfs/internal.h +++ b/fs/nfs/internal.h @@ -269,6 +269,21 @@ extern const u32 nfs41_maxgetdevinfo_overhead; extern struct rpc_procinfo nfs4_procedures[]; #endif +#ifdef CONFIG_NFS_V4_SECURITY_LABEL +extern struct nfs4_label *nfs4_label_alloc(struct nfs_server *server, gfp_t flags); +static inline void nfs4_label_free(struct nfs4_label *label) +{ + if (label) { + kfree(label->label); + kfree(label); + } + return; +} +#else +static inline struct nfs4_label *nfs4_label_alloc(struct nfs_server *server, gfp_t flags) { return NULL; } +static inline void nfs4_label_free(void *label) {} +#endif /* CONFIG_NFS_V4_SECURITY_LABEL */ + /* proc.c */ void nfs_close_context(struct nfs_open_context *ctx, int is_sync); extern struct nfs_client *nfs_init_client(struct nfs_client *clp, diff --git a/fs/nfs/nfs4_fs.h b/fs/nfs/nfs4_fs.h index 3ce79b04522e..5609edc742a0 100644 --- a/fs/nfs/nfs4_fs.h +++ b/fs/nfs/nfs4_fs.h @@ -9,6 +9,14 @@ #ifndef __LINUX_FS_NFS_NFS4_FS_H #define __LINUX_FS_NFS_NFS4_FS_H +#if defined(CONFIG_NFS_V4_2) +#define NFS4_MAX_MINOR_VERSION 2 +#elif defined(CONFIG_NFS_V4_1) +#define NFS4_MAX_MINOR_VERSION 1 +#else +#define NFS4_MAX_MINOR_VERSION 0 +#endif + #if IS_ENABLED(CONFIG_NFS_V4) #define NFS4_MAX_LOOP_ON_RECOVER (10) diff --git a/include/linux/nfs4.h b/include/linux/nfs4.h index c6f41b616965..ddd84871c0ad 100644 --- a/include/linux/nfs4.h +++ b/include/linux/nfs4.h @@ -410,16 +410,6 @@ enum lock_type4 { #define NFS4_VERSION 4 #define NFS4_MINOR_VERSION 0 -#if defined(CONFIG_NFS_V4_2) -#define NFS4_MAX_MINOR_VERSION 2 -#else -#if defined(CONFIG_NFS_V4_1) -#define NFS4_MAX_MINOR_VERSION 1 -#else -#define NFS4_MAX_MINOR_VERSION 0 -#endif /* CONFIG_NFS_V4_1 */ -#endif /* CONFIG_NFS_V4_2 */ - #define NFS4_DEBUG 1 /* Index of predefined Linux client operations */ diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h index 14a48207a304..48997374eaf0 100644 --- a/include/linux/nfs_fs.h +++ b/include/linux/nfs_fs.h @@ -506,24 +506,6 @@ extern const struct inode_operations nfs_referral_inode_operations; extern int nfs_mountpoint_expiry_timeout; extern void nfs_release_automount_timer(void); -/* - * linux/fs/nfs/nfs4proc.c - */ -#ifdef CONFIG_NFS_V4_SECURITY_LABEL -extern struct nfs4_label *nfs4_label_alloc(struct nfs_server *server, gfp_t flags); -static inline void nfs4_label_free(struct nfs4_label *label) -{ - if (label) { - kfree(label->label); - kfree(label); - } - return; -} -#else -static inline struct nfs4_label *nfs4_label_alloc(struct nfs_server *server, gfp_t flags) { return NULL; } -static inline void nfs4_label_free(void *label) {} -#endif - /* * linux/fs/nfs/unlink.c */ -- cgit v1.2.3 From 829e57d7c590832caad04355b044667902194f6a Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 18 Nov 2013 14:33:50 -0500 Subject: NFS: Fix a warning in nfs_setsecurity MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix the following warning: linux-nfs/fs/nfs/inode.c:315:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration] Signed-off-by: Trond Myklebust --- fs/nfs/inode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c index 18ab2da4eeb6..00ad1c2b217d 100644 --- a/fs/nfs/inode.c +++ b/fs/nfs/inode.c @@ -312,7 +312,7 @@ struct nfs4_label *nfs4_label_alloc(struct nfs_server *server, gfp_t flags) } EXPORT_SYMBOL_GPL(nfs4_label_alloc); #else -void inline nfs_setsecurity(struct inode *inode, struct nfs_fattr *fattr, +void nfs_setsecurity(struct inode *inode, struct nfs_fattr *fattr, struct nfs4_label *label) { } -- cgit v1.2.3 From 4a82fd7c4e78a1b7a224f9ae8bb7e1fd95f670e0 Mon Sep 17 00:00:00 2001 From: Andy Adamson Date: Fri, 15 Nov 2013 16:36:16 -0500 Subject: NFSv4 wait on recovery for async session errors When the state manager is processing the NFS4CLNT_DELEGRETURN flag, session draining is off, but DELEGRETURN can still get a session error. The async handler calls nfs4_schedule_session_recovery returns -EAGAIN, and the DELEGRETURN done then restarts the RPC task in the prepare state. With the state manager still processing the NFS4CLNT_DELEGRETURN flag with session draining off, these DELEGRETURNs will cycle with errors filling up the session slots. This prevents OPEN reclaims (from nfs_delegation_claim_opens) required by the NFS4CLNT_DELEGRETURN state manager processing from completing, hanging the state manager in the __rpc_wait_for_completion_task in nfs4_run_open_task as seen in this kernel thread dump: kernel: 4.12.32.53-ma D 0000000000000000 0 3393 2 0x00000000 kernel: ffff88013995fb60 0000000000000046 ffff880138cc5400 ffff88013a9df140 kernel: ffff8800000265c0 ffffffff8116eef0 ffff88013fc10080 0000000300000001 kernel: ffff88013a4ad058 ffff88013995ffd8 000000000000fbc8 ffff88013a4ad058 kernel: Call Trace: kernel: [] ? cache_alloc_refill+0x1c0/0x240 kernel: [] ? rpc_wait_bit_killable+0x0/0xa0 [sunrpc] kernel: [] rpc_wait_bit_killable+0x42/0xa0 [sunrpc] kernel: [] __wait_on_bit+0x5f/0x90 kernel: [] ? rpc_wait_bit_killable+0x0/0xa0 [sunrpc] kernel: [] out_of_line_wait_on_bit+0x78/0x90 kernel: [] ? wake_bit_function+0x0/0x50 kernel: [] __rpc_wait_for_completion_task+0x2d/0x30 [sunrpc] kernel: [] nfs4_run_open_task+0x11c/0x160 [nfs] kernel: [] nfs4_open_recover_helper+0x87/0x120 [nfs] kernel: [] nfs4_open_recover+0xc6/0x150 [nfs] kernel: [] ? nfs4_open_recoverdata_alloc+0x2f/0x60 [nfs] kernel: [] nfs4_open_delegation_recall+0x6a/0xa0 [nfs] kernel: [] nfs_end_delegation_return+0x120/0x2e0 [nfs] kernel: [] ? queue_work+0x1f/0x30 kernel: [] nfs_client_return_marked_delegations+0xd7/0x110 [nfs] kernel: [] nfs4_run_state_manager+0x548/0x620 [nfs] kernel: [] ? nfs4_run_state_manager+0x0/0x620 [nfs] kernel: [] kthread+0x96/0xa0 kernel: [] child_rip+0xa/0x20 kernel: [] ? kthread+0x0/0xa0 kernel: [] ? child_rip+0x0/0x20 The state manager can not therefore process the DELEGRETURN session errors. Change the async handler to wait for recovery on session errors. Signed-off-by: Andy Adamson Cc: stable@vger.kernel.org Signed-off-by: Trond Myklebust --- fs/nfs/nfs4proc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 5ab33c0792df..1f4edfbb4a70 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -4803,7 +4803,7 @@ nfs4_async_handle_error(struct rpc_task *task, const struct nfs_server *server, dprintk("%s ERROR %d, Reset session\n", __func__, task->tk_status); nfs4_schedule_session_recovery(clp->cl_session, task->tk_status); - goto restart_call; + goto wait_on_recovery; #endif /* CONFIG_NFS_V4_1 */ case -NFS4ERR_DELAY: nfs_inc_server_stats(server, NFSIOS_DELAY); -- cgit v1.2.3 From c97cf606e43b85a6cf158b810375dd77312024db Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 19 Nov 2013 16:34:14 -0500 Subject: NFSv4: Update list of irrecoverable errors on DELEGRETURN If the DELEGRETURN errors out with something like NFS4ERR_BAD_STATEID then there is no recovery possible. Just quit without returning an error. Also, note that the client must not assume that the NFSv4 lease has been renewed when it sees an error on DELEGRETURN. Signed-off-by: Trond Myklebust Cc: stable@vger.kernel.org --- fs/nfs/nfs4proc.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 1f4edfbb4a70..ca36d0d50b7d 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -4988,11 +4988,17 @@ static void nfs4_delegreturn_done(struct rpc_task *task, void *calldata) trace_nfs4_delegreturn_exit(&data->args, &data->res, task->tk_status); switch (task->tk_status) { - case -NFS4ERR_STALE_STATEID: - case -NFS4ERR_EXPIRED: case 0: renew_lease(data->res.server, data->timestamp); break; + case -NFS4ERR_ADMIN_REVOKED: + case -NFS4ERR_DELEG_REVOKED: + case -NFS4ERR_BAD_STATEID: + case -NFS4ERR_OLD_STATEID: + case -NFS4ERR_STALE_STATEID: + case -NFS4ERR_EXPIRED: + task->tk_status = 0; + break; default: if (nfs4_async_handle_error(task, data->res.server, NULL) == -EAGAIN) { -- cgit v1.2.3 From 1c283531115bda77a9b559271311c1983fbcffaa Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Tue, 8 Oct 2013 16:38:53 +0200 Subject: ARM: at91: rm9200: switch back to clockevents_config_and_register MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The timer code for at91rm9200 was already converted some time ago by Shawn Guo in commit 838a2ae (ARM: use clockevents_config_and_register() where possible) but because of a rounding issue in the timer core this resulted in an easily reproducible oops. So it was reverted (commit b7a8ca5 (ARM: at91: rm9200 fix time support)) which stopped the oops from happening because min_delta_ns is increased by one in arch code which stopped from problem from happening. Now that the timer core problem is fixed (commit a4578ea (clockevents: Sanitize ticks to nsec conversion)), we can switch back to the clockevents_config_and_register helper. Tested-by: Nicolas Ferre Signed-off-by: Uwe Kleine-König Signed-off-by: Daniel Lezcano --- arch/arm/mach-at91/at91rm9200_time.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c index f607deb40f4d..bc7b363a3083 100644 --- a/arch/arm/mach-at91/at91rm9200_time.c +++ b/arch/arm/mach-at91/at91rm9200_time.c @@ -174,7 +174,6 @@ clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev) static struct clock_event_device clkevt = { .name = "at91_tick", .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .shift = 32, .rating = 150, .set_next_event = clkevt32k_next_event, .set_mode = clkevt32k_mode, @@ -265,11 +264,9 @@ void __init at91rm9200_timer_init(void) at91_st_write(AT91_ST_RTMR, 1); /* Setup timer clockevent, with minimum of two ticks (important!!) */ - clkevt.mult = div_sc(AT91_SLOW_CLOCK, NSEC_PER_SEC, clkevt.shift); - clkevt.max_delta_ns = clockevent_delta2ns(AT91_ST_ALMV, &clkevt); - clkevt.min_delta_ns = clockevent_delta2ns(2, &clkevt) + 1; clkevt.cpumask = cpumask_of(0); - clockevents_register_device(&clkevt); + clockevents_config_and_register(&clkevt, AT91_SLOW_CLOCK, + 2, AT91_ST_ALMV); /* register clocksource */ clocksource_register_hz(&clk32k, AT91_SLOW_CLOCK); -- cgit v1.2.3 From a4a5fc3b64cd553820d97667056506636eaaba77 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Fri, 8 Nov 2013 11:07:59 +0100 Subject: clocksource: sh_mtu2: Release clock when sh_mtu2_register() fails Fix the probe error path to release the clock resource when the sh_mtu2_register() call fails. Cc: Daniel Lezcano Cc: linux-kernel@vger.kernel.org Signed-off-by: Laurent Pinchart Acked-by: Simon Horman Signed-off-by: Daniel Lezcano --- drivers/clocksource/sh_mtu2.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/clocksource/sh_mtu2.c b/drivers/clocksource/sh_mtu2.c index 4aac9ee0d0c0..e6cfb328eb2e 100644 --- a/drivers/clocksource/sh_mtu2.c +++ b/drivers/clocksource/sh_mtu2.c @@ -313,8 +313,15 @@ static int sh_mtu2_setup(struct sh_mtu2_priv *p, struct platform_device *pdev) goto err1; } - return sh_mtu2_register(p, (char *)dev_name(&p->pdev->dev), - cfg->clockevent_rating); + ret = sh_mtu2_register(p, (char *)dev_name(&p->pdev->dev), + cfg->clockevent_rating); + if (ret < 0) + goto err2; + + return 0; + + err2: + clk_put(p->clk); err1: iounmap(p->mapbase); err0: -- cgit v1.2.3 From bd7549308eed47b3750b3dab692034a553e75663 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Fri, 8 Nov 2013 11:07:59 +0100 Subject: clocksource: sh_mtu2: Add clk_prepare/unprepare support Prepare the clock at probe time, as there is no other appropriate place in the driver where we're allowed to sleep. Cc: Daniel Lezcano Cc: linux-kernel@vger.kernel.org Signed-off-by: Laurent Pinchart Acked-by: Simon Horman Signed-off-by: Daniel Lezcano --- drivers/clocksource/sh_mtu2.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/clocksource/sh_mtu2.c b/drivers/clocksource/sh_mtu2.c index e6cfb328eb2e..3cf12834681e 100644 --- a/drivers/clocksource/sh_mtu2.c +++ b/drivers/clocksource/sh_mtu2.c @@ -313,13 +313,18 @@ static int sh_mtu2_setup(struct sh_mtu2_priv *p, struct platform_device *pdev) goto err1; } + ret = clk_prepare(p->clk); + if (ret < 0) + goto err2; + ret = sh_mtu2_register(p, (char *)dev_name(&p->pdev->dev), cfg->clockevent_rating); if (ret < 0) - goto err2; + goto err3; return 0; - + err3: + clk_unprepare(p->clk); err2: clk_put(p->clk); err1: -- cgit v1.2.3 From 394a4486f009a184b58fc2f2435d6f5f800870bb Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Fri, 8 Nov 2013 11:07:59 +0100 Subject: clocksource: sh_tmu: Release clock when sh_tmu_register() fails Fix the probe error path to release the clock resource when the sh_tmu_register() call fails. Cc: Daniel Lezcano Cc: linux-kernel@vger.kernel.org Signed-off-by: Laurent Pinchart Acked-by: Simon Horman Signed-off-by: Daniel Lezcano --- drivers/clocksource/sh_tmu.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c index 78b8dae49628..15978372c937 100644 --- a/drivers/clocksource/sh_tmu.c +++ b/drivers/clocksource/sh_tmu.c @@ -475,9 +475,16 @@ static int sh_tmu_setup(struct sh_tmu_priv *p, struct platform_device *pdev) p->cs_enabled = false; p->enable_count = 0; - return sh_tmu_register(p, (char *)dev_name(&p->pdev->dev), - cfg->clockevent_rating, - cfg->clocksource_rating); + ret = sh_tmu_register(p, (char *)dev_name(&p->pdev->dev), + cfg->clockevent_rating, + cfg->clocksource_rating); + if (ret < 0) + goto err2; + + return 0; + + err2: + clk_put(p->clk); err1: iounmap(p->mapbase); err0: -- cgit v1.2.3 From 1c09eb3e2d761ffd152faa6b9d06caf560e7d445 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Fri, 8 Nov 2013 11:08:00 +0100 Subject: clocksource: sh_tmu: Add clk_prepare/unprepare support Prepare the clock at probe time, as there is no other appropriate place in the driver where we're allowed to sleep. Cc: Daniel Lezcano Cc: linux-kernel@vger.kernel.org Signed-off-by: Laurent Pinchart Acked-by: Simon Horman Signed-off-by: Daniel Lezcano --- drivers/clocksource/sh_tmu.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c index 15978372c937..63557cda0a7d 100644 --- a/drivers/clocksource/sh_tmu.c +++ b/drivers/clocksource/sh_tmu.c @@ -472,6 +472,11 @@ static int sh_tmu_setup(struct sh_tmu_priv *p, struct platform_device *pdev) ret = PTR_ERR(p->clk); goto err1; } + + ret = clk_prepare(p->clk); + if (ret < 0) + goto err2; + p->cs_enabled = false; p->enable_count = 0; @@ -479,10 +484,12 @@ static int sh_tmu_setup(struct sh_tmu_priv *p, struct platform_device *pdev) cfg->clockevent_rating, cfg->clocksource_rating); if (ret < 0) - goto err2; + goto err3; return 0; + err3: + clk_unprepare(p->clk); err2: clk_put(p->clk); err1: -- cgit v1.2.3 From 69794ad70cd3b600319f175fc0cbe7abd510791f Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 20 Nov 2013 12:57:19 -0500 Subject: NFSv4: close needs to handle NFS4ERR_ADMIN_REVOKED Also ensure that we zero out the stateid mode when exiting Signed-off-by: Trond Myklebust --- fs/nfs/nfs4proc.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index ca36d0d50b7d..f01e2aa53210 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -2518,9 +2518,8 @@ static void nfs4_close_done(struct rpc_task *task, void *data) calldata->roc_barrier); nfs_set_open_stateid(state, &calldata->res.stateid, 0); renew_lease(server, calldata->timestamp); - nfs4_close_clear_stateid_flags(state, - calldata->arg.fmode); break; + case -NFS4ERR_ADMIN_REVOKED: case -NFS4ERR_STALE_STATEID: case -NFS4ERR_OLD_STATEID: case -NFS4ERR_BAD_STATEID: @@ -2528,9 +2527,13 @@ static void nfs4_close_done(struct rpc_task *task, void *data) if (calldata->arg.fmode == 0) break; default: - if (nfs4_async_handle_error(task, server, state) == -EAGAIN) + if (nfs4_async_handle_error(task, server, state) == -EAGAIN) { rpc_restart_call_prepare(task); + goto out_release; + } } + nfs4_close_clear_stateid_flags(state, calldata->arg.fmode); +out_release: nfs_release_seqid(calldata->arg.seqid); nfs_refresh_inode(calldata->inode, calldata->res.fattr); dprintk("%s: done, ret = %d!\n", __func__, task->tk_status); -- cgit v1.2.3 From 2c575026fae6e63771bd2a4c1d407214a8096a89 Mon Sep 17 00:00:00 2001 From: Hong Zhiguo Date: Wed, 20 Nov 2013 10:35:05 -0700 Subject: Update of blkg_stat and blkg_rwstat may happen in bh context. While u64_stats_fetch_retry is only preempt_disable on 32bit UP system. This is not enough to avoid preemption by bh and may read strange 64 bit value. Signed-off-by: Hong Zhiguo Acked-by: Tejun Heo Cc: stable@kernel.org Signed-off-by: Jens Axboe --- block/blk-cgroup.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/block/blk-cgroup.h b/block/blk-cgroup.h index 1610b22edf09..86154eab9523 100644 --- a/block/blk-cgroup.h +++ b/block/blk-cgroup.h @@ -435,9 +435,9 @@ static inline uint64_t blkg_stat_read(struct blkg_stat *stat) uint64_t v; do { - start = u64_stats_fetch_begin(&stat->syncp); + start = u64_stats_fetch_begin_bh(&stat->syncp); v = stat->cnt; - } while (u64_stats_fetch_retry(&stat->syncp, start)); + } while (u64_stats_fetch_retry_bh(&stat->syncp, start)); return v; } @@ -508,9 +508,9 @@ static inline struct blkg_rwstat blkg_rwstat_read(struct blkg_rwstat *rwstat) struct blkg_rwstat tmp; do { - start = u64_stats_fetch_begin(&rwstat->syncp); + start = u64_stats_fetch_begin_bh(&rwstat->syncp); tmp = *rwstat; - } while (u64_stats_fetch_retry(&rwstat->syncp, start)); + } while (u64_stats_fetch_retry_bh(&rwstat->syncp, start)); return tmp; } -- cgit v1.2.3 From 77f7ce9a9f636daaa65731a833bae1311a7b80e5 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Wed, 20 Nov 2013 12:02:03 -0800 Subject: clocksource: arm_arch_timer: Hide eventstream Kconfig on non-ARM Pavel Machek reports that this config is exposed on x86 where the ARM architected timers aren't even present. Make it depend on the ARM architected timers being selected so that non-ARM builds aren't asked about it. Reported-by: Pavel Machek Reviewed-by: Pavel Machek Signed-off-by: Stephen Boyd Signed-off-by: Daniel Lezcano --- drivers/clocksource/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index bdb953e15d2a..5c07a56962db 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -87,6 +87,7 @@ config ARM_ARCH_TIMER config ARM_ARCH_TIMER_EVTSTREAM bool "Support for ARM architected timer event stream generation" default y if ARM_ARCH_TIMER + depends on ARM_ARCH_TIMER help This option enables support for event stream generation based on the ARM architected timer. It is used for waking up CPUs executing -- cgit v1.2.3 From 4b92894ee70c9110c083aa60b0663d357495864d Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Thu, 21 Nov 2013 16:11:15 -0700 Subject: spi: core: invert success test in devm_spi_register_master devres_add() should be called when the action to be undone succeeded, not when it failed. Fix the inverted test in devm_spi_register_master() which was doing the opposite. The user-visible issue without this fix is: insmod spi-tegra114.ko Assume there's an MTD device on that SPI bus, which creates /dev/mtd0. rmmod spi-tegra114 Doesn't remove devices on the SPI bus. insmod spi-tegra114.ko Creates a duplicate SPI device which creates /dev/mtd1. hexdump -C /dev/mtd0 That's the old device, which uses an SPI bus hosted by a non-existent module, which causes the oops below. Unable to handle kernel paging request at virtual address bf0017c0 pgd = c0004000 [bf0017c0] *pgd=ad51b811, *pte=00000000, *ppte=00000000 Internal error: Oops: 80000007 [#1] PREEMPT SMP ARM ... PC is at 0xbf0017c0 LR is at spi_pump_messages+0x15c/0x204 pc : [] lr : [] psr: 60000113 ... Fixes: 666d5b4c742b ("spi: core: Add devm_spi_register_master()") Signed-off-by: Stephen Warren Signed-off-by: Mark Brown --- drivers/spi/spi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 8d05accf706c..481e13f0db54 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -1390,7 +1390,7 @@ int devm_spi_register_master(struct device *dev, struct spi_master *master) return -ENOMEM; ret = spi_register_master(master); - if (ret != 0) { + if (!ret) { *ptr = master; devres_add(dev, ptr); } else { -- cgit v1.2.3 From 4be77398ac9d948773116b6be4a3c91b3d6ea18c Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Fri, 22 Nov 2013 11:44:51 -0800 Subject: time: Fix 1ns/tick drift w/ GENERIC_TIME_VSYSCALL_OLD Since commit 1e75fa8be9f (time: Condense timekeeper.xtime into xtime_sec - merged in v3.6), there has been an problem with the error accounting in the timekeeping code, such that when truncating to nanoseconds, we round up to the next nsec, but the balancing adjustment to the ntp_error value was dropped. This causes 1ns per tick drift forward of the clock. In 3.7, this logic was isolated to only GENERIC_TIME_VSYSCALL_OLD architectures (s390, ia64, powerpc). The fix is simply to balance the accounting and to subtract the added nanosecond from ntp_error. This allows the internal long-term clock steering to keep the clock accurate. While this fix removes the regression added in 1e75fa8be9f, the ideal solution is to move away from GENERIC_TIME_VSYSCALL_OLD and use the new VSYSCALL method, which avoids entirely the nanosecond granular rounding, and the resulting short-term clock adjustment oscillation needed to keep long term accurate time. [ jstultz: Many thanks to Martin for his efforts identifying this subtle bug, and providing the fix. ] Originally-from: Martin Schwidefsky Cc: Tony Luck Cc: Paul Mackerras Cc: Benjamin Herrenschmidt Cc: Andy Lutomirski Cc: Paul Turner Cc: Steven Rostedt Cc: Richard Cochran Cc: Prarit Bhargava Cc: Fenghua Yu Cc: Thomas Gleixner Cc: stable #v3.6+ Link: http://lkml.kernel.org/r/1385149491-20307-1-git-send-email-john.stultz@linaro.org Signed-off-by: John Stultz Signed-off-by: Thomas Gleixner --- kernel/time/timekeeping.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c index 3abf53418b67..87b4f00284c9 100644 --- a/kernel/time/timekeeping.c +++ b/kernel/time/timekeeping.c @@ -1347,7 +1347,7 @@ static inline void old_vsyscall_fixup(struct timekeeper *tk) tk->xtime_nsec -= remainder; tk->xtime_nsec += 1ULL << tk->shift; tk->ntp_error += remainder << tk->ntp_error_shift; - + tk->ntp_error -= (1ULL << tk->shift) << tk->ntp_error_shift; } #else #define old_vsyscall_fixup(tk) -- cgit v1.2.3 From 12b69a599745fc9e203f61fbb7160b2cc5f479dd Mon Sep 17 00:00:00 2001 From: Arnaud Ebalard Date: Tue, 5 Nov 2013 21:45:48 +0100 Subject: ARM: mvebu: second PCIe unit of Armada XP mv78230 is only x1 capable Various Marvell datasheets advertise second PCIe unit of mv78230 flavour of Armada XP as x4/quad x1 capable. This second unit is in fact only x1 capable. This patch fixes current mv78230 .dtsi to reflect that, i.e. makes 1.0 the second interface (instead of 2.0 at the moment). This was successfully tested on a mv78230-based ReadyNAS 2120 platform with a x1 device (FL1009 XHCI controller) connected to this second interface. Signed-off-by: Arnaud Ebalard Acked-by: Thomas Petazzoni Cc: # v3.10.x Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-xp-mv78230.dtsi | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi index 3f5e6121c730..98335fb34b7a 100644 --- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi @@ -47,7 +47,7 @@ /* * MV78230 has 2 PCIe units Gen2.0: One unit can be * configured as x4 or quad x1 lanes. One unit is - * x4/x1. + * x1 only. */ pcie-controller { compatible = "marvell,armada-xp-pcie"; @@ -62,10 +62,10 @@ ranges = <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */ - 0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */ 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */ 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */ 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */ + 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */ @@ -74,8 +74,8 @@ 0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */ 0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */ 0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */ - 0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */ - 0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */>; + 0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ + 0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */>; pcie@1,0 { device_type = "pci"; @@ -145,20 +145,20 @@ status = "disabled"; }; - pcie@9,0 { + pcie@5,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; - reg = <0x4800 0 0 0 0>; + assigned-addresses = <0x82000800 0 0x80000 0 0x2000>; + reg = <0x2800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; - ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0 - 0x81000000 0 0 0x81000000 0x9 0 1 0>; + ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0 + 0x81000000 0 0 0x81000000 0x5 0 1 0>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 99>; - marvell,pcie-port = <2>; + interrupt-map = <0 0 0 0 &mpic 62>; + marvell,pcie-port = <1>; marvell,pcie-lane = <0>; - clocks = <&gateclk 26>; + clocks = <&gateclk 9>; status = "disabled"; }; }; -- cgit v1.2.3 From 2163e61c92d9337e721a0d067d88ae62b52e0d3e Mon Sep 17 00:00:00 2001 From: Arnaud Ebalard Date: Tue, 5 Nov 2013 21:46:02 +0100 Subject: ARM: mvebu: fix second and third PCIe unit of Armada XP mv78260 mv78260 flavour of Marvell Armada XP SoC has 3 PCIe units. The two first units are both x4 and quad x1 capable. The third unit is only x4 capable. This patch fixes mv78260 .dtsi to reflect those capabilities. Signed-off-by: Arnaud Ebalard Acked-by: Thomas Petazzoni Cc: # v3.10.x Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-xp-mv78260.dtsi | 109 ++++++++++++++++++++++++------- 1 file changed, 85 insertions(+), 24 deletions(-) diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index 3e9fd1353f89..66609684d41b 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -48,7 +48,7 @@ /* * MV78260 has 3 PCIe units Gen2.0: Two units can be * configured as x4 or quad x1 lanes. One unit is - * x4/x1. + * x4 only. */ pcie-controller { compatible = "marvell,armada-xp-pcie"; @@ -68,7 +68,9 @@ 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */ 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */ 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */ - 0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000 /* Port 3.0 registers */ + 0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000 /* Port 1.1 registers */ + 0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000 /* Port 1.2 registers */ + 0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000 /* Port 1.3 registers */ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */ @@ -77,10 +79,18 @@ 0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */ 0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */ 0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */ - 0x82000000 0x9 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ - 0x81000000 0x9 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */ - 0x82000000 0xa 0 MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */ - 0x81000000 0xa 0 MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO */>; + + 0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ + 0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */ + 0x82000000 0x6 0 MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */ + 0x81000000 0x6 0 MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO */ + 0x82000000 0x7 0 MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */ + 0x81000000 0x7 0 MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO */ + 0x82000000 0x8 0 MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */ + 0x81000000 0x8 0 MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO */ + + 0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */ + 0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */>; pcie@1,0 { device_type = "pci"; @@ -106,8 +116,8 @@ #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; - ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 - 0x81000000 0 0 0x81000000 0x2 0 1 0>; + ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 + 0x81000000 0 0 0x81000000 0x2 0 1 0>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &mpic 59>; marvell,pcie-port = <0>; @@ -150,37 +160,88 @@ status = "disabled"; }; - pcie@9,0 { + pcie@5,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; - reg = <0x4800 0 0 0 0>; + assigned-addresses = <0x82000800 0 0x80000 0 0x2000>; + reg = <0x2800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; - ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0 - 0x81000000 0 0 0x81000000 0x9 0 1 0>; + ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0 + 0x81000000 0 0 0x81000000 0x5 0 1 0>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 99>; - marvell,pcie-port = <2>; + interrupt-map = <0 0 0 0 &mpic 62>; + marvell,pcie-port = <1>; marvell,pcie-lane = <0>; - clocks = <&gateclk 26>; + clocks = <&gateclk 9>; status = "disabled"; }; - pcie@10,0 { + pcie@6,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x82000 0 0x2000>; - reg = <0x5000 0 0 0 0>; + assigned-addresses = <0x82000800 0 0x84000 0 0x2000>; + reg = <0x3000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; - ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0 - 0x81000000 0 0 0x81000000 0xa 0 1 0>; + ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0 + 0x81000000 0 0 0x81000000 0x6 0 1 0>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 103>; - marvell,pcie-port = <3>; + interrupt-map = <0 0 0 0 &mpic 63>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <1>; + clocks = <&gateclk 10>; + status = "disabled"; + }; + + pcie@7,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x88000 0 0x2000>; + reg = <0x3800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0 + 0x81000000 0 0 0x81000000 0x7 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 64>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <2>; + clocks = <&gateclk 11>; + status = "disabled"; + }; + + pcie@8,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>; + reg = <0x4000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0 + 0x81000000 0 0 0x81000000 0x8 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 65>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <3>; + clocks = <&gateclk 12>; + status = "disabled"; + }; + + pcie@9,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; + reg = <0x4800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0 + 0x81000000 0 0 0x81000000 0x9 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 99>; + marvell,pcie-port = <2>; marvell,pcie-lane = <0>; - clocks = <&gateclk 27>; + clocks = <&gateclk 26>; status = "disabled"; }; }; -- cgit v1.2.3 From d6c416148545bd99d3cc05e672460168245cc156 Mon Sep 17 00:00:00 2001 From: Chang Xiangzhong Date: Thu, 21 Nov 2013 22:56:28 +0100 Subject: net: sctp: find the correct highest_new_tsn in sack Function sctp_check_transmitted(transport t, ...) would iterate all of transport->transmitted queue and looking for the highest __newly__ acked tsn. The original algorithm would depend on the order of the assoc->transport_list (in function sctp_outq_sack line 1215 - 1226). The result might not be the expected due to the order of the tranport_list. Solution: checking if the exising is smaller than the new one before assigning Signed-off-by: Chang Xiangzhong Acked-by: Vlad Yasevich Acked-by: Neil Horman Signed-off-by: David S. Miller --- net/sctp/outqueue.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/sctp/outqueue.c b/net/sctp/outqueue.c index 94df75877869..abb6db008df1 100644 --- a/net/sctp/outqueue.c +++ b/net/sctp/outqueue.c @@ -1391,7 +1391,8 @@ static void sctp_check_transmitted(struct sctp_outq *q, */ if (!tchunk->tsn_gap_acked) { tchunk->tsn_gap_acked = 1; - *highest_new_tsn_in_sack = tsn; + if (TSN_lt(*highest_new_tsn_in_sack, tsn)) + *highest_new_tsn_in_sack = tsn; bytes_acked += sctp_data_size(tchunk); if (!tchunk->transport) migrate_bytes += sctp_data_size(tchunk); -- cgit v1.2.3 From cc5c00bbb44c5d68b883aa5cb9d01514a2525d94 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Fri, 22 Nov 2013 10:31:29 +0800 Subject: gro: Only verify TCP checksums for candidates In some cases we may receive IP packets that are longer than their stated lengths. Such packets are never merged in GRO. However, we may end up computing their checksums incorrectly and end up allowing packets with a bogus checksum enter our stack with the checksum status set as verified. Since such packets are rare and not performance-critical, this patch simply skips the checksum verification for them. Reported-by: Alexander Duyck Signed-off-by: Herbert Xu Acked-by: Alexander Duyck Thanks, Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/tcp_offload.c | 5 +++++ net/ipv6/tcpv6_offload.c | 5 +++++ 2 files changed, 10 insertions(+) diff --git a/net/ipv4/tcp_offload.c b/net/ipv4/tcp_offload.c index a2b68a108eae..55aeec930140 100644 --- a/net/ipv4/tcp_offload.c +++ b/net/ipv4/tcp_offload.c @@ -276,6 +276,10 @@ static struct sk_buff **tcp4_gro_receive(struct sk_buff **head, struct sk_buff * __wsum wsum; __sum16 sum; + /* Don't bother verifying checksum if we're going to flush anyway. */ + if (NAPI_GRO_CB(skb)->flush) + goto skip_csum; + switch (skb->ip_summed) { case CHECKSUM_COMPLETE: if (!tcp_v4_check(skb_gro_len(skb), iph->saddr, iph->daddr, @@ -301,6 +305,7 @@ flush: break; } +skip_csum: return tcp_gro_receive(head, skb); } diff --git a/net/ipv6/tcpv6_offload.c b/net/ipv6/tcpv6_offload.c index c1097c798900..71923d14127a 100644 --- a/net/ipv6/tcpv6_offload.c +++ b/net/ipv6/tcpv6_offload.c @@ -39,6 +39,10 @@ static struct sk_buff **tcp6_gro_receive(struct sk_buff **head, __wsum wsum; __sum16 sum; + /* Don't bother verifying checksum if we're going to flush anyway. */ + if (NAPI_GRO_CB(skb)->flush) + goto skip_csum; + switch (skb->ip_summed) { case CHECKSUM_COMPLETE: if (!tcp_v6_check(skb_gro_len(skb), &iph->saddr, &iph->daddr, @@ -65,6 +69,7 @@ flush: break; } +skip_csum: return tcp_gro_receive(head, skb); } -- cgit v1.2.3 From b8ee93ba80b5a0b6c3c06b65c34dd1276f16c047 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Fri, 22 Nov 2013 10:32:11 +0800 Subject: gro: Clean up tcpX_gro_receive checksum verification This patch simplifies the checksum verification in tcpX_gro_receive by reusing the CHECKSUM_COMPLETE code for CHECKSUM_NONE. All it does for CHECKSUM_NONE is compute the partial checksum and then treat it as if it came from the hardware (CHECKSUM_COMPLETE). Signed-off-by: Herbert Xu Cheers, Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/tcp_offload.c | 26 ++++++++++---------------- net/ipv6/tcpv6_offload.c | 27 ++++++++++----------------- 2 files changed, 20 insertions(+), 33 deletions(-) diff --git a/net/ipv4/tcp_offload.c b/net/ipv4/tcp_offload.c index 55aeec930140..05606353c7e7 100644 --- a/net/ipv4/tcp_offload.c +++ b/net/ipv4/tcp_offload.c @@ -274,35 +274,29 @@ static struct sk_buff **tcp4_gro_receive(struct sk_buff **head, struct sk_buff * { const struct iphdr *iph = skb_gro_network_header(skb); __wsum wsum; - __sum16 sum; /* Don't bother verifying checksum if we're going to flush anyway. */ if (NAPI_GRO_CB(skb)->flush) goto skip_csum; + wsum = skb->csum; + switch (skb->ip_summed) { + case CHECKSUM_NONE: + wsum = skb_checksum(skb, skb_gro_offset(skb), skb_gro_len(skb), + 0); + + /* fall through */ + case CHECKSUM_COMPLETE: if (!tcp_v4_check(skb_gro_len(skb), iph->saddr, iph->daddr, - skb->csum)) { + wsum)) { skb->ip_summed = CHECKSUM_UNNECESSARY; break; } -flush: + NAPI_GRO_CB(skb)->flush = 1; return NULL; - - case CHECKSUM_NONE: - wsum = csum_tcpudp_nofold(iph->saddr, iph->daddr, - skb_gro_len(skb), IPPROTO_TCP, 0); - sum = csum_fold(skb_checksum(skb, - skb_gro_offset(skb), - skb_gro_len(skb), - wsum)); - if (sum) - goto flush; - - skb->ip_summed = CHECKSUM_UNNECESSARY; - break; } skip_csum: diff --git a/net/ipv6/tcpv6_offload.c b/net/ipv6/tcpv6_offload.c index 71923d14127a..6d18157dc32c 100644 --- a/net/ipv6/tcpv6_offload.c +++ b/net/ipv6/tcpv6_offload.c @@ -37,36 +37,29 @@ static struct sk_buff **tcp6_gro_receive(struct sk_buff **head, { const struct ipv6hdr *iph = skb_gro_network_header(skb); __wsum wsum; - __sum16 sum; /* Don't bother verifying checksum if we're going to flush anyway. */ if (NAPI_GRO_CB(skb)->flush) goto skip_csum; + wsum = skb->csum; + switch (skb->ip_summed) { + case CHECKSUM_NONE: + wsum = skb_checksum(skb, skb_gro_offset(skb), skb_gro_len(skb), + wsum); + + /* fall through */ + case CHECKSUM_COMPLETE: if (!tcp_v6_check(skb_gro_len(skb), &iph->saddr, &iph->daddr, - skb->csum)) { + wsum)) { skb->ip_summed = CHECKSUM_UNNECESSARY; break; } -flush: + NAPI_GRO_CB(skb)->flush = 1; return NULL; - - case CHECKSUM_NONE: - wsum = ~csum_unfold(csum_ipv6_magic(&iph->saddr, &iph->daddr, - skb_gro_len(skb), - IPPROTO_TCP, 0)); - sum = csum_fold(skb_checksum(skb, - skb_gro_offset(skb), - skb_gro_len(skb), - wsum)); - if (sum) - goto flush; - - skb->ip_summed = CHECKSUM_UNNECESSARY; - break; } skip_csum: -- cgit v1.2.3 From fb10f802b0fb76079612cb78505cbc9ad81e683b Mon Sep 17 00:00:00 2001 From: Gao feng Date: Fri, 22 Nov 2013 14:48:40 +0800 Subject: tcp_memcg: remove useless var old_lim nobody needs it. remove. Signed-off-by: Gao feng Signed-off-by: David S. Miller --- net/ipv4/tcp_memcontrol.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/net/ipv4/tcp_memcontrol.c b/net/ipv4/tcp_memcontrol.c index 03e9154f7e68..269a89ecd2f4 100644 --- a/net/ipv4/tcp_memcontrol.c +++ b/net/ipv4/tcp_memcontrol.c @@ -60,7 +60,6 @@ EXPORT_SYMBOL(tcp_destroy_cgroup); static int tcp_update_limit(struct mem_cgroup *memcg, u64 val) { struct cg_proto *cg_proto; - u64 old_lim; int i; int ret; @@ -71,7 +70,6 @@ static int tcp_update_limit(struct mem_cgroup *memcg, u64 val) if (val > RES_COUNTER_MAX) val = RES_COUNTER_MAX; - old_lim = res_counter_read_u64(&cg_proto->memory_allocated, RES_LIMIT); ret = res_counter_set_limit(&cg_proto->memory_allocated, val); if (ret) return ret; -- cgit v1.2.3 From ca15a078bd907df5fc1c009477869c5cbde3b753 Mon Sep 17 00:00:00 2001 From: Oussama Ghorbel Date: Fri, 22 Nov 2013 16:23:20 +0100 Subject: sit: generate icmpv6 error when receiving icmpv4 error Send icmpv6 error with type "destination unreachable" and code "address unreachable" when receiving icmpv4 error and sufficient data bytes are available This patch enhances the compliance of sit tunnel with section 3.4 of rfc 4213 Signed-off-by: Oussama Ghorbel Signed-off-by: David S. Miller --- net/ipv6/sit.c | 44 ++++++++++++++++++++++++++++++++++++++------ 1 file changed, 38 insertions(+), 6 deletions(-) diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c index 1b4a4a953675..8435267836a7 100644 --- a/net/ipv6/sit.c +++ b/net/ipv6/sit.c @@ -478,14 +478,44 @@ static void ipip6_tunnel_uninit(struct net_device *dev) dev_put(dev); } +/* Generate icmpv6 with type/code ICMPV6_DEST_UNREACH/ICMPV6_ADDR_UNREACH + * if sufficient data bytes are available + */ +static int ipip6_err_gen_icmpv6_unreach(struct sk_buff *skb) +{ + const struct iphdr *iph = (const struct iphdr *) skb->data; + struct rt6_info *rt; + struct sk_buff *skb2; + + if (!pskb_may_pull(skb, iph->ihl * 4 + sizeof(struct ipv6hdr) + 8)) + return 1; + + skb2 = skb_clone(skb, GFP_ATOMIC); + + if (!skb2) + return 1; + + skb_dst_drop(skb2); + skb_pull(skb2, iph->ihl * 4); + skb_reset_network_header(skb2); + + rt = rt6_lookup(dev_net(skb->dev), &ipv6_hdr(skb2)->saddr, NULL, 0, 0); + + if (rt && rt->dst.dev) + skb2->dev = rt->dst.dev; + + icmpv6_send(skb2, ICMPV6_DEST_UNREACH, ICMPV6_ADDR_UNREACH, 0); + + if (rt) + ip6_rt_put(rt); + + kfree_skb(skb2); + + return 0; +} static int ipip6_err(struct sk_buff *skb, u32 info) { - -/* All the routers (except for Linux) return only - 8 bytes of packet payload. It means, that precise relaying of - ICMP in the real Internet is absolutely infeasible. - */ const struct iphdr *iph = (const struct iphdr *)skb->data; const int type = icmp_hdr(skb)->type; const int code = icmp_hdr(skb)->code; @@ -500,7 +530,6 @@ static int ipip6_err(struct sk_buff *skb, u32 info) case ICMP_DEST_UNREACH: switch (code) { case ICMP_SR_FAILED: - case ICMP_PORT_UNREACH: /* Impossible event. */ return 0; default: @@ -545,6 +574,9 @@ static int ipip6_err(struct sk_buff *skb, u32 info) goto out; err = 0; + if (!ipip6_err_gen_icmpv6_unreach(skb)) + goto out; + if (t->parms.iph.ttl == 0 && type == ICMP_TIME_EXCEEDED) goto out; -- cgit v1.2.3 From 85fbaa75037d0b6b786ff18658ddf0b4014ce2a4 Mon Sep 17 00:00:00 2001 From: Hannes Frederic Sowa Date: Sat, 23 Nov 2013 00:46:12 +0100 Subject: inet: fix addr_len/msg->msg_namelen assignment in recv_error and rxpmtu functions Commit bceaa90240b6019ed73b49965eac7d167610be69 ("inet: prevent leakage of uninitialized memory to user in recv syscalls") conditionally updated addr_len if the msg_name is written to. The recv_error and rxpmtu functions relied on the recvmsg functions to set up addr_len before. As this does not happen any more we have to pass addr_len to those functions as well and set it to the size of the corresponding sockaddr length. This broke traceroute and such. Fixes: bceaa90240b6 ("inet: prevent leakage of uninitialized memory to user in recv syscalls") Reported-by: Brad Spengler Reported-by: Tom Labanowski Cc: mpb Cc: David S. Miller Cc: Eric Dumazet Signed-off-by: Hannes Frederic Sowa Signed-off-by: David S. Miller --- include/net/ip.h | 2 +- include/net/ipv6.h | 6 ++++-- include/net/ping.h | 3 ++- net/ipv4/ip_sockglue.c | 3 ++- net/ipv4/ping.c | 5 +++-- net/ipv4/raw.c | 2 +- net/ipv4/udp.c | 2 +- net/ipv6/datagram.c | 7 +++++-- net/ipv6/ping.c | 3 ++- net/ipv6/raw.c | 4 ++-- net/ipv6/udp.c | 4 ++-- net/l2tp/l2tp_ip6.c | 2 +- 12 files changed, 26 insertions(+), 17 deletions(-) diff --git a/include/net/ip.h b/include/net/ip.h index 217bc5bfc6c6..5a25f36fe3a7 100644 --- a/include/net/ip.h +++ b/include/net/ip.h @@ -473,7 +473,7 @@ int compat_ip_getsockopt(struct sock *sk, int level, int optname, int ip_ra_control(struct sock *sk, unsigned char on, void (*destructor)(struct sock *)); -int ip_recv_error(struct sock *sk, struct msghdr *msg, int len); +int ip_recv_error(struct sock *sk, struct msghdr *msg, int len, int *addr_len); void ip_icmp_error(struct sock *sk, struct sk_buff *skb, int err, __be16 port, u32 info, u8 *payload); void ip_local_error(struct sock *sk, int err, __be32 daddr, __be16 dport, diff --git a/include/net/ipv6.h b/include/net/ipv6.h index 2a5f668cd683..eb198acaac1d 100644 --- a/include/net/ipv6.h +++ b/include/net/ipv6.h @@ -776,8 +776,10 @@ int compat_ipv6_getsockopt(struct sock *sk, int level, int optname, int ip6_datagram_connect(struct sock *sk, struct sockaddr *addr, int addr_len); -int ipv6_recv_error(struct sock *sk, struct msghdr *msg, int len); -int ipv6_recv_rxpmtu(struct sock *sk, struct msghdr *msg, int len); +int ipv6_recv_error(struct sock *sk, struct msghdr *msg, int len, + int *addr_len); +int ipv6_recv_rxpmtu(struct sock *sk, struct msghdr *msg, int len, + int *addr_len); void ipv6_icmp_error(struct sock *sk, struct sk_buff *skb, int err, __be16 port, u32 info, u8 *payload); void ipv6_local_error(struct sock *sk, int err, struct flowi6 *fl6, u32 info); diff --git a/include/net/ping.h b/include/net/ping.h index 3f67704f3747..90f48417b03d 100644 --- a/include/net/ping.h +++ b/include/net/ping.h @@ -31,7 +31,8 @@ /* Compatibility glue so we can support IPv6 when it's compiled as a module */ struct pingv6_ops { - int (*ipv6_recv_error)(struct sock *sk, struct msghdr *msg, int len); + int (*ipv6_recv_error)(struct sock *sk, struct msghdr *msg, int len, + int *addr_len); int (*ip6_datagram_recv_ctl)(struct sock *sk, struct msghdr *msg, struct sk_buff *skb); int (*icmpv6_err_convert)(u8 type, u8 code, int *err); diff --git a/net/ipv4/ip_sockglue.c b/net/ipv4/ip_sockglue.c index 3f858266fa7e..ddf32a6bc415 100644 --- a/net/ipv4/ip_sockglue.c +++ b/net/ipv4/ip_sockglue.c @@ -386,7 +386,7 @@ void ip_local_error(struct sock *sk, int err, __be32 daddr, __be16 port, u32 inf /* * Handle MSG_ERRQUEUE */ -int ip_recv_error(struct sock *sk, struct msghdr *msg, int len) +int ip_recv_error(struct sock *sk, struct msghdr *msg, int len, int *addr_len) { struct sock_exterr_skb *serr; struct sk_buff *skb, *skb2; @@ -423,6 +423,7 @@ int ip_recv_error(struct sock *sk, struct msghdr *msg, int len) serr->addr_offset); sin->sin_port = serr->port; memset(&sin->sin_zero, 0, sizeof(sin->sin_zero)); + *addr_len = sizeof(*sin); } memcpy(&errhdr.ee, &serr->ee, sizeof(struct sock_extended_err)); diff --git a/net/ipv4/ping.c b/net/ipv4/ping.c index 876c6ca2d8f9..840cf1b9e6ee 100644 --- a/net/ipv4/ping.c +++ b/net/ipv4/ping.c @@ -841,10 +841,11 @@ int ping_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg, if (flags & MSG_ERRQUEUE) { if (family == AF_INET) { - return ip_recv_error(sk, msg, len); + return ip_recv_error(sk, msg, len, addr_len); #if IS_ENABLED(CONFIG_IPV6) } else if (family == AF_INET6) { - return pingv6_ops.ipv6_recv_error(sk, msg, len); + return pingv6_ops.ipv6_recv_error(sk, msg, len, + addr_len); #endif } } diff --git a/net/ipv4/raw.c b/net/ipv4/raw.c index 5cb8ddb505ee..23c3e5b5bb53 100644 --- a/net/ipv4/raw.c +++ b/net/ipv4/raw.c @@ -697,7 +697,7 @@ static int raw_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg, goto out; if (flags & MSG_ERRQUEUE) { - err = ip_recv_error(sk, msg, len); + err = ip_recv_error(sk, msg, len, addr_len); goto out; } diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index 5944d7d668dd..44dfaa09b584 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -1236,7 +1236,7 @@ int udp_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg, bool slow; if (flags & MSG_ERRQUEUE) - return ip_recv_error(sk, msg, len); + return ip_recv_error(sk, msg, len, addr_len); try_again: skb = __skb_recv_datagram(sk, flags | (noblock ? MSG_DONTWAIT : 0), diff --git a/net/ipv6/datagram.c b/net/ipv6/datagram.c index a454b0ff57c7..d690204a0275 100644 --- a/net/ipv6/datagram.c +++ b/net/ipv6/datagram.c @@ -318,7 +318,7 @@ void ipv6_local_rxpmtu(struct sock *sk, struct flowi6 *fl6, u32 mtu) /* * Handle MSG_ERRQUEUE */ -int ipv6_recv_error(struct sock *sk, struct msghdr *msg, int len) +int ipv6_recv_error(struct sock *sk, struct msghdr *msg, int len, int *addr_len) { struct ipv6_pinfo *np = inet6_sk(sk); struct sock_exterr_skb *serr; @@ -369,6 +369,7 @@ int ipv6_recv_error(struct sock *sk, struct msghdr *msg, int len) &sin->sin6_addr); sin->sin6_scope_id = 0; } + *addr_len = sizeof(*sin); } memcpy(&errhdr.ee, &serr->ee, sizeof(struct sock_extended_err)); @@ -423,7 +424,8 @@ EXPORT_SYMBOL_GPL(ipv6_recv_error); /* * Handle IPV6_RECVPATHMTU */ -int ipv6_recv_rxpmtu(struct sock *sk, struct msghdr *msg, int len) +int ipv6_recv_rxpmtu(struct sock *sk, struct msghdr *msg, int len, + int *addr_len) { struct ipv6_pinfo *np = inet6_sk(sk); struct sk_buff *skb; @@ -457,6 +459,7 @@ int ipv6_recv_rxpmtu(struct sock *sk, struct msghdr *msg, int len) sin->sin6_port = 0; sin->sin6_scope_id = mtu_info.ip6m_addr.sin6_scope_id; sin->sin6_addr = mtu_info.ip6m_addr.sin6_addr; + *addr_len = sizeof(*sin); } put_cmsg(msg, SOL_IPV6, IPV6_PATHMTU, sizeof(mtu_info), &mtu_info); diff --git a/net/ipv6/ping.c b/net/ipv6/ping.c index 8815e31a87fe..a83243c3d656 100644 --- a/net/ipv6/ping.c +++ b/net/ipv6/ping.c @@ -57,7 +57,8 @@ static struct inet_protosw pingv6_protosw = { /* Compatibility glue so we can support IPv6 when it's compiled as a module */ -static int dummy_ipv6_recv_error(struct sock *sk, struct msghdr *msg, int len) +static int dummy_ipv6_recv_error(struct sock *sk, struct msghdr *msg, int len, + int *addr_len) { return -EAFNOSUPPORT; } diff --git a/net/ipv6/raw.c b/net/ipv6/raw.c index e24ff1df0401..7fb4e14c467f 100644 --- a/net/ipv6/raw.c +++ b/net/ipv6/raw.c @@ -466,10 +466,10 @@ static int rawv6_recvmsg(struct kiocb *iocb, struct sock *sk, return -EOPNOTSUPP; if (flags & MSG_ERRQUEUE) - return ipv6_recv_error(sk, msg, len); + return ipv6_recv_error(sk, msg, len, addr_len); if (np->rxpmtu && np->rxopt.bits.rxpmtu) - return ipv6_recv_rxpmtu(sk, msg, len); + return ipv6_recv_rxpmtu(sk, msg, len, addr_len); skb = skb_recv_datagram(sk, flags, noblock, &err); if (!skb) diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c index 81eb8cf8389b..bcd5699313c3 100644 --- a/net/ipv6/udp.c +++ b/net/ipv6/udp.c @@ -393,10 +393,10 @@ int udpv6_recvmsg(struct kiocb *iocb, struct sock *sk, bool slow; if (flags & MSG_ERRQUEUE) - return ipv6_recv_error(sk, msg, len); + return ipv6_recv_error(sk, msg, len, addr_len); if (np->rxpmtu && np->rxopt.bits.rxpmtu) - return ipv6_recv_rxpmtu(sk, msg, len); + return ipv6_recv_rxpmtu(sk, msg, len, addr_len); try_again: skb = __skb_recv_datagram(sk, flags | (noblock ? MSG_DONTWAIT : 0), diff --git a/net/l2tp/l2tp_ip6.c b/net/l2tp/l2tp_ip6.c index cfd65304be60..d9b437e55007 100644 --- a/net/l2tp/l2tp_ip6.c +++ b/net/l2tp/l2tp_ip6.c @@ -665,7 +665,7 @@ static int l2tp_ip6_recvmsg(struct kiocb *iocb, struct sock *sk, *addr_len = sizeof(*lsa); if (flags & MSG_ERRQUEUE) - return ipv6_recv_error(sk, msg, len); + return ipv6_recv_error(sk, msg, len, addr_len); skb = skb_recv_datagram(sk, flags, noblock, &err); if (!skb) -- cgit v1.2.3 From 1fa4c710b6fe7b0aac9907240291b6fe6aafc3b8 Mon Sep 17 00:00:00 2001 From: Hannes Frederic Sowa Date: Sat, 23 Nov 2013 07:22:33 +0100 Subject: ipv6: fix leaking uninitialized port number of offender sockaddr Offenders don't have port numbers, so set it to 0. Signed-off-by: Hannes Frederic Sowa Signed-off-by: David S. Miller --- net/ipv6/datagram.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/ipv6/datagram.c b/net/ipv6/datagram.c index d690204a0275..8dfe1f4d3c1a 100644 --- a/net/ipv6/datagram.c +++ b/net/ipv6/datagram.c @@ -378,6 +378,7 @@ int ipv6_recv_error(struct sock *sk, struct msghdr *msg, int len, int *addr_len) if (serr->ee.ee_origin != SO_EE_ORIGIN_LOCAL) { sin->sin6_family = AF_INET6; sin->sin6_flowinfo = 0; + sin->sin6_port = 0; if (skb->protocol == htons(ETH_P_IPV6)) { sin->sin6_addr = ipv6_hdr(skb)->saddr; if (np->rxopt.all) -- cgit v1.2.3 From 4d0820cf6a55d72350cb2d24a4504f62fbde95d9 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sat, 23 Nov 2013 12:59:20 -0800 Subject: sch_tbf: handle too small burst If a too small burst is inadvertently set on TBF, we might trigger a bug in tbf_segment(), as 'skb' instead of 'segs' was used in a qdisc_reshape_fail() call. tc qdisc add dev eth0 root handle 1: tbf latency 50ms burst 1KB rate 50mbit Fix the bug, and add a warning, as such configuration is not going to work anyway for non GSO packets. (For some reason, one has to use a burst >= 1520 to get a working configuration, even with old kernels. This is a probable iproute2/tc bug) Based on a report and initial patch from Yang Yingliang Fixes: e43ac79a4bc6 ("sch_tbf: segment too big GSO packets") Signed-off-by: Eric Dumazet Reported-by: Yang Yingliang Signed-off-by: David S. Miller --- net/sched/sch_tbf.c | 32 +++++++++++++++++++++++++------- 1 file changed, 25 insertions(+), 7 deletions(-) diff --git a/net/sched/sch_tbf.c b/net/sched/sch_tbf.c index 68f98595819c..a6090051c5db 100644 --- a/net/sched/sch_tbf.c +++ b/net/sched/sch_tbf.c @@ -21,6 +21,7 @@ #include #include #include +#include /* Simple Token Bucket Filter. @@ -117,6 +118,22 @@ struct tbf_sched_data { }; +/* + * Return length of individual segments of a gso packet, + * including all headers (MAC, IP, TCP/UDP) + */ +static unsigned int skb_gso_seglen(const struct sk_buff *skb) +{ + unsigned int hdr_len = skb_transport_header(skb) - skb_mac_header(skb); + const struct skb_shared_info *shinfo = skb_shinfo(skb); + + if (likely(shinfo->gso_type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6))) + hdr_len += tcp_hdrlen(skb); + else + hdr_len += sizeof(struct udphdr); + return hdr_len + shinfo->gso_size; +} + /* GSO packet is too big, segment it so that tbf can transmit * each segment in time */ @@ -136,12 +153,8 @@ static int tbf_segment(struct sk_buff *skb, struct Qdisc *sch) while (segs) { nskb = segs->next; segs->next = NULL; - if (likely(segs->len <= q->max_size)) { - qdisc_skb_cb(segs)->pkt_len = segs->len; - ret = qdisc_enqueue(segs, q->qdisc); - } else { - ret = qdisc_reshape_fail(skb, sch); - } + qdisc_skb_cb(segs)->pkt_len = segs->len; + ret = qdisc_enqueue(segs, q->qdisc); if (ret != NET_XMIT_SUCCESS) { if (net_xmit_drop_count(ret)) sch->qstats.drops++; @@ -163,7 +176,7 @@ static int tbf_enqueue(struct sk_buff *skb, struct Qdisc *sch) int ret; if (qdisc_pkt_len(skb) > q->max_size) { - if (skb_is_gso(skb)) + if (skb_is_gso(skb) && skb_gso_seglen(skb) <= q->max_size) return tbf_segment(skb, sch); return qdisc_reshape_fail(skb, sch); } @@ -319,6 +332,11 @@ static int tbf_change(struct Qdisc *sch, struct nlattr *opt) if (max_size < 0) goto done; + if (max_size < psched_mtu(qdisc_dev(sch))) + pr_warn_ratelimited("sch_tbf: burst %u is lower than device %s mtu (%u) !\n", + max_size, qdisc_dev(sch)->name, + psched_mtu(qdisc_dev(sch))); + if (q->qdisc != &noop_qdisc) { err = fifo_set_limit(q->qdisc, qopt->limit); if (err) -- cgit v1.2.3 From d4360d6fb61af7aa8e027bf5983598d5437737cc Mon Sep 17 00:00:00 2001 From: Ajit Khaparde Date: Fri, 22 Nov 2013 12:51:09 -0600 Subject: be2net: Disabling and enabling interrupts in suspend and resume Interrupts need to be enabled in be_resume, when adapter boots back up from D3cold. disabling interrupts in be_suspend() just to be symmetric to be_resume(). Signed-off-by: Ravikumar Nelavelli Signed-off-by: Ajit Khaparde Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_main.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index abde97471636..9b148cf04704 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -4599,6 +4599,7 @@ static int be_suspend(struct pci_dev *pdev, pm_message_t state) if (adapter->wol) be_setup_wol(adapter, true); + be_intr_set(adapter, false); cancel_delayed_work_sync(&adapter->func_recovery_work); netif_device_detach(netdev); @@ -4634,6 +4635,7 @@ static int be_resume(struct pci_dev *pdev) if (status) return status; + be_intr_set(adapter, true); /* tell fw we're ready to fire cmds */ status = be_cmd_fw_init(adapter); if (status) -- cgit v1.2.3 From 09e83a9d449c1af533321f5bda62b6a59a4098c6 Mon Sep 17 00:00:00 2001 From: Ajit Khaparde Date: Fri, 22 Nov 2013 12:51:20 -0600 Subject: be2net: set coalesce-wm in CQ_CREATE_V2 cmd It is not being set currently. (This field is not applicable for Lancer) Signed-off-by: Vasundhara Volam Signed-off-by: Sathya Perla Signed-off-by: Ajit Khaparde Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_cmds.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c index dbcd5262c016..e0e8bc1ef14c 100644 --- a/drivers/net/ethernet/emulex/benet/be_cmds.c +++ b/drivers/net/ethernet/emulex/benet/be_cmds.c @@ -1032,6 +1032,13 @@ int be_cmd_cq_create(struct be_adapter *adapter, struct be_queue_info *cq, } else { req->hdr.version = 2; req->page_size = 1; /* 1 for 4K */ + + /* coalesce-wm field in this cmd is not relevant to Lancer. + * Lancer uses COMMON_MODIFY_CQ to set this field + */ + if (!lancer_chip(adapter)) + AMAP_SET_BITS(struct amap_cq_context_v2, coalescwm, + ctxt, coalesce_wm); AMAP_SET_BITS(struct amap_cq_context_v2, nodelay, ctxt, no_delay); AMAP_SET_BITS(struct amap_cq_context_v2, count, ctxt, -- cgit v1.2.3 From 2c7a9dc1641664173211c4ebc5db510a08684c46 Mon Sep 17 00:00:00 2001 From: Ajit Khaparde Date: Fri, 22 Nov 2013 12:51:28 -0600 Subject: be2net: Avoid programming permenant MAC by BE3-R VFs On BE3-R, the PF programs the initial MAC address for its VFs. Doing it again in VF probe, causes a FW error which although harmless generates an unnecessary error log message. Signed-off-by: Vasundhara Volam Signed-off-by: Sathya Perla Signed-off-by: Ajit Khaparde Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be.h | 1 + drivers/net/ethernet/emulex/benet/be_main.c | 10 ++++------ 2 files changed, 5 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h index f4825db5d179..5878df619b53 100644 --- a/drivers/net/ethernet/emulex/benet/be.h +++ b/drivers/net/ethernet/emulex/benet/be.h @@ -503,6 +503,7 @@ struct be_adapter { }; #define be_physfn(adapter) (!adapter->virtfn) +#define be_virtfn(adapter) (adapter->virtfn) #define sriov_enabled(adapter) (adapter->num_vfs > 0) #define sriov_want(adapter) (be_physfn(adapter) && \ (num_vfs || pci_num_vf(adapter->pdev))) diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 9b148cf04704..78a0e859760b 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -3253,12 +3253,10 @@ static int be_mac_setup(struct be_adapter *adapter) memcpy(mac, adapter->netdev->dev_addr, ETH_ALEN); } - /* On BE3 VFs this cmd may fail due to lack of privilege. - * Ignore the failure as in this case pmac_id is fetched - * in the IFACE_CREATE cmd. - */ - be_cmd_pmac_add(adapter, mac, adapter->if_handle, - &adapter->pmac_id[0], 0); + /* For BE3-R VFs, the PF programs the initial MAC address */ + if (!(BEx_chip(adapter) && be_virtfn(adapter))) + be_cmd_pmac_add(adapter, mac, adapter->if_handle, + &adapter->pmac_id[0], 0); return 0; } -- cgit v1.2.3 From 6d565409503f4e1f74ac30de14e8c91a2b826cd8 Mon Sep 17 00:00:00 2001 From: Phillip Lougher Date: Sun, 24 Nov 2013 00:40:49 +0000 Subject: Squashfs: fix failure to unlock pages on decompress error Direct decompression into the page cache. If we fall back to using an intermediate buffer (because we cannot grab all the page cache pages) and we get a decompress fail, we forgot to release the pages. Reported-by: Roman Peniaev Signed-off-by: Phillip Lougher --- fs/squashfs/file_direct.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/fs/squashfs/file_direct.c b/fs/squashfs/file_direct.c index 2943b2bfae48..62a0de6632e1 100644 --- a/fs/squashfs/file_direct.c +++ b/fs/squashfs/file_direct.c @@ -84,6 +84,9 @@ int squashfs_readpage_block(struct page *target_page, u64 block, int bsize) */ res = squashfs_read_cache(target_page, block, bsize, pages, page); + if (res < 0) + goto mark_errored; + goto out; } @@ -119,7 +122,7 @@ mark_errored: * dealt with by the caller */ for (i = 0; i < pages; i++) { - if (page[i] == target_page) + if (page[i] == NULL || page[i] == target_page) continue; flush_dcache_page(page[i]); SetPageError(page[i]); -- cgit v1.2.3 From 54acbd9688e6324470671525c7916011f1ff8081 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Tue, 12 Nov 2013 12:06:21 +0200 Subject: spi/pxa2xx: add new ACPI IDs Newer Intel PCHs with LPSS have the same SPI controllers than Haswell but ACPI IDs are different. Add these IDs to the driver list. Signed-off-by: Mika Westerberg Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/spi/spi-pxa2xx.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index cb0e1f1137ad..7028180a020a 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -1073,6 +1073,8 @@ pxa2xx_spi_acpi_get_pdata(struct platform_device *pdev) static struct acpi_device_id pxa2xx_spi_acpi_match[] = { { "INT33C0", 0 }, { "INT33C1", 0 }, + { "INT3430", 0 }, + { "INT3431", 0 }, { "80860F0E", 0 }, { }, }; -- cgit v1.2.3 From 160a061301c7adf54c40696e7ceedc73f6b747dd Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 11 Nov 2013 14:13:41 +0800 Subject: spi/qspi: set correct platform drvdata in ti_qspi_probe() The ti_qspi_remove() use the platform drvdata as a type of struct ti_qspi, we should pass correct platform drvdata to platform_set_drvdata() in ti_qspi_probe(). Signed-off-by: Wei Yongjun Signed-off-by: Mark Brown --- drivers/spi/spi-ti-qspi.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/spi/spi-ti-qspi.c b/drivers/spi/spi-ti-qspi.c index 0b71270fbf67..e147ed42e1fc 100644 --- a/drivers/spi/spi-ti-qspi.c +++ b/drivers/spi/spi-ti-qspi.c @@ -459,11 +459,10 @@ static int ti_qspi_probe(struct platform_device *pdev) if (!of_property_read_u32(np, "num-cs", &num_cs)) master->num_chipselect = num_cs; - platform_set_drvdata(pdev, master); - qspi = spi_master_get_devdata(master); qspi->master = master; qspi->dev = &pdev->dev; + platform_set_drvdata(pdev, qspi); r = platform_get_resource(pdev, IORESOURCE_MEM, 0); -- cgit v1.2.3 From 05b96675dbfc97fbb66d58cacbf2c8def020375e Mon Sep 17 00:00:00 2001 From: Sourav Poddar Date: Tue, 19 Nov 2013 18:37:15 +0530 Subject: spi/qspi: cleanup pm_runtime error check. clean up pm_runtime error check in accordance with rest of the check in the driver. Signed-off-by: Sourav Poddar Signed-off-by: Mark Brown --- drivers/spi/spi-ti-qspi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/spi-ti-qspi.c b/drivers/spi/spi-ti-qspi.c index e147ed42e1fc..f3c3c3f7aaed 100644 --- a/drivers/spi/spi-ti-qspi.c +++ b/drivers/spi/spi-ti-qspi.c @@ -161,7 +161,7 @@ static int ti_qspi_setup(struct spi_device *spi) qspi->spi_max_frequency, clk_div); ret = pm_runtime_get_sync(qspi->dev); - if (ret) { + if (ret < 0) { dev_err(qspi->dev, "pm_runtime_get_sync() failed\n"); return ret; } -- cgit v1.2.3 From cbcabb7a300bf5ab868c632048889a933e7cdae5 Mon Sep 17 00:00:00 2001 From: Sourav Poddar Date: Tue, 19 Nov 2013 18:37:16 +0530 Subject: spi/qspi: Fix qspi remove path. There is a bug in qspi removal path, as a result of which qspi cannot be removed when used as a module. The patch solves the bug and qspi can be removed cleanly. The bugs fixed are: -pm_runtime used around register access. - pm_runtime_disable need to be done before removal. - spi_unregister_master need to be called to unregister the spi device. Tested on DRA7 board. Signed-off-by: Sourav Poddar Signed-off-by: Mark Brown --- drivers/spi/spi-ti-qspi.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) diff --git a/drivers/spi/spi-ti-qspi.c b/drivers/spi/spi-ti-qspi.c index f3c3c3f7aaed..4396bd448540 100644 --- a/drivers/spi/spi-ti-qspi.c +++ b/drivers/spi/spi-ti-qspi.c @@ -516,10 +516,26 @@ free_master: static int ti_qspi_remove(struct platform_device *pdev) { - struct ti_qspi *qspi = platform_get_drvdata(pdev); + struct spi_master *master; + struct ti_qspi *qspi; + int ret; + + master = platform_get_drvdata(pdev); + qspi = spi_master_get_devdata(master); + + ret = pm_runtime_get_sync(qspi->dev); + if (ret < 0) { + dev_err(qspi->dev, "pm_runtime_get_sync() failed\n"); + return ret; + } ti_qspi_write(qspi, QSPI_WC_INT_DISABLE, QSPI_INTR_ENABLE_CLEAR_REG); + pm_runtime_put(qspi->dev); + pm_runtime_disable(&pdev->dev); + + spi_unregister_master(master); + return 0; } -- cgit v1.2.3 From c170bbb45febc03ac4d34ba2b8bb55e06104b7e7 Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Sun, 24 Nov 2013 16:32:22 -0700 Subject: block: submit_bio_wait() conversions It was being open coded in a few places. Signed-off-by: Kent Overstreet Cc: Jens Axboe Cc: Joern Engel Cc: Prasad Joshi Cc: Neil Brown Cc: Chris Mason Acked-by: NeilBrown Signed-off-by: Jens Axboe --- block/blk-flush.c | 19 +------------------ drivers/md/md.c | 12 +----------- fs/btrfs/check-integrity.c | 32 +++++++++++++------------------- fs/btrfs/check-integrity.h | 2 ++ fs/btrfs/extent_io.c | 12 +----------- fs/btrfs/scrub.c | 33 ++++----------------------------- fs/hfsplus/wrapper.c | 17 +---------------- fs/logfs/dev_bdev.c | 13 +------------ 8 files changed, 24 insertions(+), 116 deletions(-) diff --git a/block/blk-flush.c b/block/blk-flush.c index 331e627301ea..fb6f3c0ffa49 100644 --- a/block/blk-flush.c +++ b/block/blk-flush.c @@ -502,15 +502,6 @@ void blk_abort_flushes(struct request_queue *q) } } -static void bio_end_flush(struct bio *bio, int err) -{ - if (err) - clear_bit(BIO_UPTODATE, &bio->bi_flags); - if (bio->bi_private) - complete(bio->bi_private); - bio_put(bio); -} - /** * blkdev_issue_flush - queue a flush * @bdev: blockdev to issue flush for @@ -526,7 +517,6 @@ static void bio_end_flush(struct bio *bio, int err) int blkdev_issue_flush(struct block_device *bdev, gfp_t gfp_mask, sector_t *error_sector) { - DECLARE_COMPLETION_ONSTACK(wait); struct request_queue *q; struct bio *bio; int ret = 0; @@ -548,13 +538,9 @@ int blkdev_issue_flush(struct block_device *bdev, gfp_t gfp_mask, return -ENXIO; bio = bio_alloc(gfp_mask, 0); - bio->bi_end_io = bio_end_flush; bio->bi_bdev = bdev; - bio->bi_private = &wait; - bio_get(bio); - submit_bio(WRITE_FLUSH, bio); - wait_for_completion_io(&wait); + ret = submit_bio_wait(WRITE_FLUSH, bio); /* * The driver must store the error location in ->bi_sector, if @@ -564,9 +550,6 @@ int blkdev_issue_flush(struct block_device *bdev, gfp_t gfp_mask, if (error_sector) *error_sector = bio->bi_sector; - if (!bio_flagged(bio, BIO_UPTODATE)) - ret = -EIO; - bio_put(bio); return ret; } diff --git a/drivers/md/md.c b/drivers/md/md.c index b6b7a2866c9e..8700de376876 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -776,16 +776,10 @@ void md_super_wait(struct mddev *mddev) finish_wait(&mddev->sb_wait, &wq); } -static void bi_complete(struct bio *bio, int error) -{ - complete((struct completion*)bio->bi_private); -} - int sync_page_io(struct md_rdev *rdev, sector_t sector, int size, struct page *page, int rw, bool metadata_op) { struct bio *bio = bio_alloc_mddev(GFP_NOIO, 1, rdev->mddev); - struct completion event; int ret; rw |= REQ_SYNC; @@ -801,11 +795,7 @@ int sync_page_io(struct md_rdev *rdev, sector_t sector, int size, else bio->bi_sector = sector + rdev->data_offset; bio_add_page(bio, page, size, 0); - init_completion(&event); - bio->bi_private = &event; - bio->bi_end_io = bi_complete; - submit_bio(rw, bio); - wait_for_completion(&event); + submit_bio_wait(rw, bio); ret = test_bit(BIO_UPTODATE, &bio->bi_flags); bio_put(bio); diff --git a/fs/btrfs/check-integrity.c b/fs/btrfs/check-integrity.c index e0aab4456974..f85b1c409003 100644 --- a/fs/btrfs/check-integrity.c +++ b/fs/btrfs/check-integrity.c @@ -323,7 +323,6 @@ static void btrfsic_release_block_ctx(struct btrfsic_block_data_ctx *block_ctx); static int btrfsic_read_block(struct btrfsic_state *state, struct btrfsic_block_data_ctx *block_ctx); static void btrfsic_dump_database(struct btrfsic_state *state); -static void btrfsic_complete_bio_end_io(struct bio *bio, int err); static int btrfsic_test_for_metadata(struct btrfsic_state *state, char **datav, unsigned int num_pages); static void btrfsic_process_written_block(struct btrfsic_dev_state *dev_state, @@ -1677,7 +1676,6 @@ static int btrfsic_read_block(struct btrfsic_state *state, for (i = 0; i < num_pages;) { struct bio *bio; unsigned int j; - DECLARE_COMPLETION_ONSTACK(complete); bio = btrfs_io_bio_alloc(GFP_NOFS, num_pages - i); if (!bio) { @@ -1688,8 +1686,6 @@ static int btrfsic_read_block(struct btrfsic_state *state, } bio->bi_bdev = block_ctx->dev->bdev; bio->bi_sector = dev_bytenr >> 9; - bio->bi_end_io = btrfsic_complete_bio_end_io; - bio->bi_private = &complete; for (j = i; j < num_pages; j++) { ret = bio_add_page(bio, block_ctx->pagev[j], @@ -1702,12 +1698,7 @@ static int btrfsic_read_block(struct btrfsic_state *state, "btrfsic: error, failed to add a single page!\n"); return -1; } - submit_bio(READ, bio); - - /* this will also unplug the queue */ - wait_for_completion(&complete); - - if (!test_bit(BIO_UPTODATE, &bio->bi_flags)) { + if (submit_bio_wait(READ, bio)) { printk(KERN_INFO "btrfsic: read error at logical %llu dev %s!\n", block_ctx->start, block_ctx->dev->name); @@ -1730,11 +1721,6 @@ static int btrfsic_read_block(struct btrfsic_state *state, return block_ctx->len; } -static void btrfsic_complete_bio_end_io(struct bio *bio, int err) -{ - complete((struct completion *)bio->bi_private); -} - static void btrfsic_dump_database(struct btrfsic_state *state) { struct list_head *elem_all; @@ -2998,14 +2984,12 @@ int btrfsic_submit_bh(int rw, struct buffer_head *bh) return submit_bh(rw, bh); } -void btrfsic_submit_bio(int rw, struct bio *bio) +static void __btrfsic_submit_bio(int rw, struct bio *bio) { struct btrfsic_dev_state *dev_state; - if (!btrfsic_is_initialized) { - submit_bio(rw, bio); + if (!btrfsic_is_initialized) return; - } mutex_lock(&btrfsic_mutex); /* since btrfsic_submit_bio() is also called before @@ -3097,10 +3081,20 @@ void btrfsic_submit_bio(int rw, struct bio *bio) } leave: mutex_unlock(&btrfsic_mutex); +} +void btrfsic_submit_bio(int rw, struct bio *bio) +{ + __btrfsic_submit_bio(rw, bio); submit_bio(rw, bio); } +int btrfsic_submit_bio_wait(int rw, struct bio *bio) +{ + __btrfsic_submit_bio(rw, bio); + return submit_bio_wait(rw, bio); +} + int btrfsic_mount(struct btrfs_root *root, struct btrfs_fs_devices *fs_devices, int including_extent_data, u32 print_mask) diff --git a/fs/btrfs/check-integrity.h b/fs/btrfs/check-integrity.h index 8b59175cc502..13b8566c97ab 100644 --- a/fs/btrfs/check-integrity.h +++ b/fs/btrfs/check-integrity.h @@ -22,9 +22,11 @@ #ifdef CONFIG_BTRFS_FS_CHECK_INTEGRITY int btrfsic_submit_bh(int rw, struct buffer_head *bh); void btrfsic_submit_bio(int rw, struct bio *bio); +int btrfsic_submit_bio_wait(int rw, struct bio *bio); #else #define btrfsic_submit_bh submit_bh #define btrfsic_submit_bio submit_bio +#define btrfsic_submit_bio_wait submit_bio_wait #endif int btrfsic_mount(struct btrfs_root *root, diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index 856bc2b2192c..014beaa9458c 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -1952,11 +1952,6 @@ static int free_io_failure(struct inode *inode, struct io_failure_record *rec, return err; } -static void repair_io_failure_callback(struct bio *bio, int err) -{ - complete(bio->bi_private); -} - /* * this bypasses the standard btrfs submit functions deliberately, as * the standard behavior is to write all copies in a raid setup. here we only @@ -1973,7 +1968,6 @@ int repair_io_failure(struct btrfs_fs_info *fs_info, u64 start, { struct bio *bio; struct btrfs_device *dev; - DECLARE_COMPLETION_ONSTACK(compl); u64 map_length = 0; u64 sector; struct btrfs_bio *bbio = NULL; @@ -1989,8 +1983,6 @@ int repair_io_failure(struct btrfs_fs_info *fs_info, u64 start, bio = btrfs_io_bio_alloc(GFP_NOFS, 1); if (!bio) return -EIO; - bio->bi_private = &compl; - bio->bi_end_io = repair_io_failure_callback; bio->bi_size = 0; map_length = length; @@ -2011,10 +2003,8 @@ int repair_io_failure(struct btrfs_fs_info *fs_info, u64 start, } bio->bi_bdev = dev->bdev; bio_add_page(bio, page, length, start - page_offset(page)); - btrfsic_submit_bio(WRITE_SYNC, bio); - wait_for_completion(&compl); - if (!test_bit(BIO_UPTODATE, &bio->bi_flags)) { + if (btrfsic_submit_bio_wait(WRITE_SYNC, bio)) { /* try to remap that extent elsewhere? */ bio_put(bio); btrfs_dev_stat_inc_and_print(dev, BTRFS_DEV_STAT_WRITE_ERRS); diff --git a/fs/btrfs/scrub.c b/fs/btrfs/scrub.c index 2544805544f0..3214ebe593bd 100644 --- a/fs/btrfs/scrub.c +++ b/fs/btrfs/scrub.c @@ -208,7 +208,6 @@ static void scrub_recheck_block_checksum(struct btrfs_fs_info *fs_info, int is_metadata, int have_csum, const u8 *csum, u64 generation, u16 csum_size); -static void scrub_complete_bio_end_io(struct bio *bio, int err); static int scrub_repair_block_from_good_copy(struct scrub_block *sblock_bad, struct scrub_block *sblock_good, int force_write); @@ -1292,7 +1291,6 @@ static void scrub_recheck_block(struct btrfs_fs_info *fs_info, for (page_num = 0; page_num < sblock->page_count; page_num++) { struct bio *bio; struct scrub_page *page = sblock->pagev[page_num]; - DECLARE_COMPLETION_ONSTACK(complete); if (page->dev->bdev == NULL) { page->io_error = 1; @@ -1309,18 +1307,11 @@ static void scrub_recheck_block(struct btrfs_fs_info *fs_info, } bio->bi_bdev = page->dev->bdev; bio->bi_sector = page->physical >> 9; - bio->bi_end_io = scrub_complete_bio_end_io; - bio->bi_private = &complete; bio_add_page(bio, page->page, PAGE_SIZE, 0); - btrfsic_submit_bio(READ, bio); - - /* this will also unplug the queue */ - wait_for_completion(&complete); - - page->io_error = !test_bit(BIO_UPTODATE, &bio->bi_flags); - if (!test_bit(BIO_UPTODATE, &bio->bi_flags)) + if (btrfsic_submit_bio_wait(READ, bio)) sblock->no_io_error_seen = 0; + bio_put(bio); } @@ -1389,11 +1380,6 @@ static void scrub_recheck_block_checksum(struct btrfs_fs_info *fs_info, sblock->checksum_error = 1; } -static void scrub_complete_bio_end_io(struct bio *bio, int err) -{ - complete((struct completion *)bio->bi_private); -} - static int scrub_repair_block_from_good_copy(struct scrub_block *sblock_bad, struct scrub_block *sblock_good, int force_write) @@ -1428,7 +1414,6 @@ static int scrub_repair_page_from_good_copy(struct scrub_block *sblock_bad, sblock_bad->checksum_error || page_bad->io_error) { struct bio *bio; int ret; - DECLARE_COMPLETION_ONSTACK(complete); if (!page_bad->dev->bdev) { printk_ratelimited(KERN_WARNING @@ -1441,19 +1426,14 @@ static int scrub_repair_page_from_good_copy(struct scrub_block *sblock_bad, return -EIO; bio->bi_bdev = page_bad->dev->bdev; bio->bi_sector = page_bad->physical >> 9; - bio->bi_end_io = scrub_complete_bio_end_io; - bio->bi_private = &complete; ret = bio_add_page(bio, page_good->page, PAGE_SIZE, 0); if (PAGE_SIZE != ret) { bio_put(bio); return -EIO; } - btrfsic_submit_bio(WRITE, bio); - /* this will also unplug the queue */ - wait_for_completion(&complete); - if (!bio_flagged(bio, BIO_UPTODATE)) { + if (btrfsic_submit_bio_wait(WRITE, bio)) { btrfs_dev_stat_inc_and_print(page_bad->dev, BTRFS_DEV_STAT_WRITE_ERRS); btrfs_dev_replace_stats_inc( @@ -3373,7 +3353,6 @@ static int write_page_nocow(struct scrub_ctx *sctx, struct bio *bio; struct btrfs_device *dev; int ret; - DECLARE_COMPLETION_ONSTACK(compl); dev = sctx->wr_ctx.tgtdev; if (!dev) @@ -3390,8 +3369,6 @@ static int write_page_nocow(struct scrub_ctx *sctx, spin_unlock(&sctx->stat_lock); return -ENOMEM; } - bio->bi_private = &compl; - bio->bi_end_io = scrub_complete_bio_end_io; bio->bi_size = 0; bio->bi_sector = physical_for_dev_replace >> 9; bio->bi_bdev = dev->bdev; @@ -3402,10 +3379,8 @@ leave_with_eio: btrfs_dev_stat_inc_and_print(dev, BTRFS_DEV_STAT_WRITE_ERRS); return -EIO; } - btrfsic_submit_bio(WRITE_SYNC, bio); - wait_for_completion(&compl); - if (!test_bit(BIO_UPTODATE, &bio->bi_flags)) + if (btrfsic_submit_bio_wait(WRITE_SYNC, bio)) goto leave_with_eio; bio_put(bio); diff --git a/fs/hfsplus/wrapper.c b/fs/hfsplus/wrapper.c index b51a6079108d..e9a97a0d4314 100644 --- a/fs/hfsplus/wrapper.c +++ b/fs/hfsplus/wrapper.c @@ -24,13 +24,6 @@ struct hfsplus_wd { u16 embed_count; }; -static void hfsplus_end_io_sync(struct bio *bio, int err) -{ - if (err) - clear_bit(BIO_UPTODATE, &bio->bi_flags); - complete(bio->bi_private); -} - /* * hfsplus_submit_bio - Perfrom block I/O * @sb: super block of volume for I/O @@ -53,7 +46,6 @@ static void hfsplus_end_io_sync(struct bio *bio, int err) int hfsplus_submit_bio(struct super_block *sb, sector_t sector, void *buf, void **data, int rw) { - DECLARE_COMPLETION_ONSTACK(wait); struct bio *bio; int ret = 0; u64 io_size; @@ -73,8 +65,6 @@ int hfsplus_submit_bio(struct super_block *sb, sector_t sector, bio = bio_alloc(GFP_NOIO, 1); bio->bi_sector = sector; bio->bi_bdev = sb->s_bdev; - bio->bi_end_io = hfsplus_end_io_sync; - bio->bi_private = &wait; if (!(rw & WRITE) && data) *data = (u8 *)buf + offset; @@ -93,12 +83,7 @@ int hfsplus_submit_bio(struct super_block *sb, sector_t sector, buf = (u8 *)buf + len; } - submit_bio(rw, bio); - wait_for_completion(&wait); - - if (!bio_flagged(bio, BIO_UPTODATE)) - ret = -EIO; - + ret = submit_bio_wait(rw, bio); out: bio_put(bio); return ret < 0 ? ret : 0; diff --git a/fs/logfs/dev_bdev.c b/fs/logfs/dev_bdev.c index 550475ca6a0e..0f95f0d0b313 100644 --- a/fs/logfs/dev_bdev.c +++ b/fs/logfs/dev_bdev.c @@ -14,16 +14,10 @@ #define PAGE_OFS(ofs) ((ofs) & (PAGE_SIZE-1)) -static void request_complete(struct bio *bio, int err) -{ - complete((struct completion *)bio->bi_private); -} - static int sync_request(struct page *page, struct block_device *bdev, int rw) { struct bio bio; struct bio_vec bio_vec; - struct completion complete; bio_init(&bio); bio.bi_max_vecs = 1; @@ -35,13 +29,8 @@ static int sync_request(struct page *page, struct block_device *bdev, int rw) bio.bi_size = PAGE_SIZE; bio.bi_bdev = bdev; bio.bi_sector = page->index * (PAGE_SIZE >> 9); - init_completion(&complete); - bio.bi_private = &complete; - bio.bi_end_io = request_complete; - submit_bio(rw, &bio); - wait_for_completion(&complete); - return test_bit(BIO_UPTODATE, &bio.bi_flags) ? 0 : -EIO; + return submit_bio_wait(rw, &bio); } static int bdev_readpage(void *_sb, struct page *page) -- cgit v1.2.3 From 38d321c899457be111f1a1bcd8c8d1ca18772072 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 8 Nov 2013 02:01:38 -0800 Subject: pinctrl: rockchip: testing the wrong variable There is a copy and paste bug so we test "info->reg_base" instead of "info->reg_pull". Signed-off-by: Dan Carpenter Acked-by: Heiko Stuebner Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-rockchip.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c index e939c28cbf1f..fe2ec1bdf56e 100644 --- a/drivers/pinctrl/pinctrl-rockchip.c +++ b/drivers/pinctrl/pinctrl-rockchip.c @@ -1453,8 +1453,8 @@ static int rockchip_pinctrl_probe(struct platform_device *pdev) if (ctrl->type == RK3188) { res = platform_get_resource(pdev, IORESOURCE_MEM, 1); info->reg_pull = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(info->reg_base)) - return PTR_ERR(info->reg_base); + if (IS_ERR(info->reg_pull)) + return PTR_ERR(info->reg_pull); } ret = rockchip_gpiolib_register(pdev, info); -- cgit v1.2.3 From c590854dffc06095f38a63b3bdb9e4370282a53e Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sun, 10 Nov 2013 02:35:56 +0300 Subject: pinctrl: abx500: fix some more bitwise AND tests I sent a patch to fix some bitwise AND tests but I guess I missed some. Sorry about that. Signed-off-by: Dan Carpenter Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-abx500.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/pinctrl/pinctrl-abx500.c b/drivers/pinctrl/pinctrl-abx500.c index 4780959e11d4..5183e7bb8de3 100644 --- a/drivers/pinctrl/pinctrl-abx500.c +++ b/drivers/pinctrl/pinctrl-abx500.c @@ -418,7 +418,7 @@ static int abx500_set_mode(struct pinctrl_dev *pctldev, struct gpio_chip *chip, ret = abx500_gpio_set_bits(chip, AB8500_GPIO_ALTFUN_REG, af.alt_bit1, - !!(af.alta_val && BIT(0))); + !!(af.alta_val & BIT(0))); if (ret < 0) goto out; @@ -439,7 +439,7 @@ static int abx500_set_mode(struct pinctrl_dev *pctldev, struct gpio_chip *chip, goto out; ret = abx500_gpio_set_bits(chip, AB8500_GPIO_ALTFUN_REG, - af.alt_bit1, !!(af.altb_val && BIT(0))); + af.alt_bit1, !!(af.altb_val & BIT(0))); if (ret < 0) goto out; @@ -462,7 +462,7 @@ static int abx500_set_mode(struct pinctrl_dev *pctldev, struct gpio_chip *chip, goto out; ret = abx500_gpio_set_bits(chip, AB8500_GPIO_ALTFUN_REG, - af.alt_bit2, !!(af.altc_val && BIT(1))); + af.alt_bit2, !!(af.altc_val & BIT(1))); break; default: -- cgit v1.2.3 From d32c3e260f95f5d8ed42c64dc2d9ec79cc36da1e Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 14 Nov 2013 11:22:54 +0300 Subject: pinctrl: rockchip: missing unlock on error in rockchip_set_pull() We need to unlock here before returning -EINVAL. Fixes: 6ca5274d1d12 ('pinctrl: rockchip: add rk3188 specifics') Signed-off-by: Dan Carpenter Acked-by: Heiko Stuebner Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-rockchip.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c index fe2ec1bdf56e..46dddc159286 100644 --- a/drivers/pinctrl/pinctrl-rockchip.c +++ b/drivers/pinctrl/pinctrl-rockchip.c @@ -504,6 +504,7 @@ static int rockchip_set_pull(struct rockchip_pin_bank *bank, data |= (3 << bit); break; default: + spin_unlock_irqrestore(&bank->slock, flags); dev_err(info->dev, "unsupported pull setting %d\n", pull); return -EINVAL; -- cgit v1.2.3 From b6dda00cddcc71d2030668bc0cc0fed758c411c2 Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Mon, 25 Nov 2013 17:26:46 +0100 Subject: ARM: mvebu: use the virtual CPU registers to access coherency registers The Armada XP provides a mechanism called "virtual CPU registers" or "per-CPU register banking", to access the per-CPU registers of the current CPU, without having to worry about finding on which CPU we're running. CPU0 has its registers at 0x21800, CPU1 at 0x21900, CPU2 at 0x21A00 and CPU3 at 0x21B00. The virtual registers accessing the current CPU registers are at 0x21000. However, in the Device Tree node that provides the register addresses for the coherency unit (which is responsible for ensuring coherency between processors, and I/O coherency between processors and the DMA-capable devices), a mistake was made: the CPU0-specific registers were specified instead of the virtual CPU registers. This means that the coherency barrier needed for I/O coherency was not behaving properly when executed from a CPU different from CPU0. This patch fixes that by using the virtual CPU registers. Signed-off-by: Gregory CLEMENT Signed-off-by: Thomas Petazzoni Cc: # v3.8+ Fixes: e60304f8cb7bb5 "arm: mvebu: Add hardware I/O Coherency support" Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-370-xp.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 00d6a798c705..7f10f627ae5b 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -118,7 +118,7 @@ coherency-fabric@20200 { compatible = "marvell,coherency-fabric"; - reg = <0x20200 0xb0>, <0x21810 0x1c>; + reg = <0x20200 0xb0>, <0x21010 0x1c>; }; serial@12000 { -- cgit v1.2.3 From 96039f735e290281d0c8a08fc467de2cd610543d Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Mon, 25 Nov 2013 17:26:47 +0100 Subject: ARM: mvebu: re-enable PCIe on Armada 370 DB Commit 14fd8ed0a7fd19913 ("ARM: mvebu: Relocate Armada 370/XP PCIe device tree nodes") relocated the PCIe controller DT nodes one level up in the Device Tree, to reflect a more correct representation of the hardware introduced by the mvebu-mbus Device Tree binding. However, while most of the boards were properly adjusted accordingly, the Armada 370 DB board was left unchanged, and therefore, PCIe is seen as not enabled on this board. This patch fixes that by moving the PCIe controller node one level-up in armada-370-db.dts. Signed-off-by: Thomas Petazzoni Cc: # v3.12+ Fixes: 14fd8ed0a7fd19913 "ARM: mvebu: Relocate Armada 370/XP PCIe device tree nodes" Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-370-db.dts | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-) diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index 90ce29dbe119..08a56bcfc724 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -99,22 +99,22 @@ spi-max-frequency = <50000000>; }; }; + }; - pcie-controller { + pcie-controller { + status = "okay"; + /* + * The two PCIe units are accessible through + * both standard PCIe slots and mini-PCIe + * slots on the board. + */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + pcie@2,0 { + /* Port 1, Lane 0 */ status = "okay"; - /* - * The two PCIe units are accessible through - * both standard PCIe slots and mini-PCIe - * slots on the board. - */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - pcie@2,0 { - /* Port 1, Lane 0 */ - status = "okay"; - }; }; }; }; -- cgit v1.2.3 From 2fea6cd303c0d0cd9067da31d873b6a6d5bd75e7 Mon Sep 17 00:00:00 2001 From: Oliver Hartkopp Date: Thu, 21 Nov 2013 18:03:07 +0100 Subject: can: sja1000: fix {pre,post}_irq() handling and IRQ handler return value This patch fixes the issue that the sja1000_interrupt() function may have returned IRQ_NONE without processing the optional pre_irq() and post_irq() function before. Further the irq processing counter 'n' is moved to the end of the while statement to return correct IRQ_[NONE|HANDLED] values at error conditions. Reported-by: Wolfgang Grandegger Acked-by: Wolfgang Grandegger Signed-off-by: Oliver Hartkopp Cc: linux-stable Signed-off-by: Marc Kleine-Budde --- drivers/net/can/sja1000/sja1000.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c index 7164a999f50f..f17c3018b7c7 100644 --- a/drivers/net/can/sja1000/sja1000.c +++ b/drivers/net/can/sja1000/sja1000.c @@ -494,20 +494,20 @@ irqreturn_t sja1000_interrupt(int irq, void *dev_id) uint8_t isrc, status; int n = 0; - /* Shared interrupts and IRQ off? */ - if (priv->read_reg(priv, SJA1000_IER) == IRQ_OFF) - return IRQ_NONE; - if (priv->pre_irq) priv->pre_irq(priv); + /* Shared interrupts and IRQ off? */ + if (priv->read_reg(priv, SJA1000_IER) == IRQ_OFF) + goto out; + while ((isrc = priv->read_reg(priv, SJA1000_IR)) && (n < SJA1000_MAX_IRQ)) { - n++; + status = priv->read_reg(priv, SJA1000_SR); /* check for absent controller due to hw unplug */ if (status == 0xFF && sja1000_is_absent(priv)) - return IRQ_NONE; + goto out; if (isrc & IRQ_WUI) netdev_warn(dev, "wakeup interrupt\n"); @@ -535,7 +535,7 @@ irqreturn_t sja1000_interrupt(int irq, void *dev_id) status = priv->read_reg(priv, SJA1000_SR); /* check for absent controller */ if (status == 0xFF && sja1000_is_absent(priv)) - return IRQ_NONE; + goto out; } } if (isrc & (IRQ_DOI | IRQ_EI | IRQ_BEI | IRQ_EPI | IRQ_ALI)) { @@ -543,8 +543,9 @@ irqreturn_t sja1000_interrupt(int irq, void *dev_id) if (sja1000_err(dev, isrc, status)) break; } + n++; } - +out: if (priv->post_irq) priv->post_irq(priv); -- cgit v1.2.3 From e35d46adc49b469fd92bdb64fea8af93640e6651 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Sun, 24 Nov 2013 23:31:24 +0100 Subject: can: c_can: don't call pm_runtime_get_sync() from interrupt context The c_can driver contians a callpath (c_can_poll -> c_can_state_change -> c_can_get_berr_counter) which may call pm_runtime_get_sync() from the IRQ handler, which is not allowed and results in "BUG: scheduling while atomic". This problem is fixed by introducing __c_can_get_berr_counter, which will not call pm_runtime_get_sync(). Reported-by: Andrew Glen Tested-by: Andrew Glen Signed-off-by: Andrew Glen Cc: linux-stable Signed-off-by: Marc Kleine-Budde --- drivers/net/can/c_can/c_can.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-) diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c index e3fc07cf2f62..e59c42b446a9 100644 --- a/drivers/net/can/c_can/c_can.c +++ b/drivers/net/can/c_can/c_can.c @@ -712,22 +712,31 @@ static int c_can_set_mode(struct net_device *dev, enum can_mode mode) return 0; } -static int c_can_get_berr_counter(const struct net_device *dev, - struct can_berr_counter *bec) +static int __c_can_get_berr_counter(const struct net_device *dev, + struct can_berr_counter *bec) { unsigned int reg_err_counter; struct c_can_priv *priv = netdev_priv(dev); - c_can_pm_runtime_get_sync(priv); - reg_err_counter = priv->read_reg(priv, C_CAN_ERR_CNT_REG); bec->rxerr = (reg_err_counter & ERR_CNT_REC_MASK) >> ERR_CNT_REC_SHIFT; bec->txerr = reg_err_counter & ERR_CNT_TEC_MASK; + return 0; +} + +static int c_can_get_berr_counter(const struct net_device *dev, + struct can_berr_counter *bec) +{ + struct c_can_priv *priv = netdev_priv(dev); + int err; + + c_can_pm_runtime_get_sync(priv); + err = __c_can_get_berr_counter(dev, bec); c_can_pm_runtime_put_sync(priv); - return 0; + return err; } /* @@ -872,7 +881,7 @@ static int c_can_handle_state_change(struct net_device *dev, if (unlikely(!skb)) return 0; - c_can_get_berr_counter(dev, &bec); + __c_can_get_berr_counter(dev, &bec); reg_err_counter = priv->read_reg(priv, C_CAN_ERR_CNT_REG); rx_err_passive = (reg_err_counter & ERR_CNT_RP_MASK) >> ERR_CNT_RP_SHIFT; -- cgit v1.2.3 From 7ee330c7b3b738847bf297912b371bbcec3bc994 Mon Sep 17 00:00:00 2001 From: Holger Bechtold Date: Mon, 25 Nov 2013 15:48:19 +0100 Subject: can: c_can: fix calculation of transmitted bytes on tx complete The number of bytes transmitted was not updated correctly, if several CAN messages (with different length) were transmitted in one 'bunch'. Thus programs like 'ifconfig' showed wrong transmit byte counts. Reason was, that the message object whose DLC is to be read was not necessarily the active one at the time when priv->read_reg(priv, C_CAN_IFACE(MSGCTRL_REG, 0)) & IF_MCONT_DLC_MASK; was executed. Signed-off-by: Holger Bechtold Signed-off-by: Marc Kleine-Budde --- drivers/net/can/c_can/c_can.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c index e59c42b446a9..77061eebb034 100644 --- a/drivers/net/can/c_can/c_can.c +++ b/drivers/net/can/c_can/c_can.c @@ -763,6 +763,7 @@ static void c_can_do_tx(struct net_device *dev) if (!(val & (1 << (msg_obj_no - 1)))) { can_get_echo_skb(dev, msg_obj_no - C_CAN_MSG_OBJ_TX_FIRST); + c_can_object_get(dev, 0, msg_obj_no, IF_COMM_ALL); stats->tx_bytes += priv->read_reg(priv, C_CAN_IFACE(MSGCTRL_REG, 0)) & IF_MCONT_DLC_MASK; -- cgit v1.2.3 From ac01810c9d2814238f08a227062e66a35a0e1ea2 Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Mon, 25 Nov 2013 19:39:47 +0530 Subject: irq: Enable all irqs unconditionally in irq_resume When the system enters suspend, it disables all interrupts in suspend_device_irqs(), including the interrupts marked EARLY_RESUME. On the resume side things are different. The EARLY_RESUME interrupts are reenabled in sys_core_ops->resume and the non EARLY_RESUME interrupts are reenabled in the normal system resume path. When suspend_noirq() failed or suspend is aborted for any other reason, we might omit the resume side call to sys_core_ops->resume() and therefor the interrupts marked EARLY_RESUME are not reenabled and stay disabled forever. To solve this, enable all irqs unconditionally in irq_resume() regardless whether interrupts marked EARLY_RESUMEhave been already enabled or not. This might try to reenable already enabled interrupts in the non failure case, but the only affected platform is XEN and it has been confirmed that it does not cause any side effects. [ tglx: Massaged changelog. ] Signed-off-by: Laxman Dewangan Acked-by-and-tested-by: Konrad Rzeszutek Wilk Acked-by: Heiko Stuebner Reviewed-by: Pavel Machek Cc: Cc: Cc: Cc: Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1385388587-16442-1-git-send-email-ldewangan@nvidia.com Signed-off-by: Thomas Gleixner --- kernel/irq/pm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/irq/pm.c b/kernel/irq/pm.c index cb228bf21760..abcd6ca86cb7 100644 --- a/kernel/irq/pm.c +++ b/kernel/irq/pm.c @@ -50,7 +50,7 @@ static void resume_irqs(bool want_early) bool is_early = desc->action && desc->action->flags & IRQF_EARLY_RESUME; - if (is_early != want_early) + if (!is_early && want_early) continue; raw_spin_lock_irqsave(&desc->lock, flags); -- cgit v1.2.3 From 7ce93f3186119754ec7a646bcbeb1f80e4214767 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 25 Nov 2013 14:23:45 -0800 Subject: ARM: OMAP2+: Fix more missing data for omap3.dtsi file After dropping the duplicate data in hwmod that now should come from the .dts files, I noticed few more entries missing. Let's add these as otherwise devices relying on these won't work. Looks like the side tone entries are bundled into the mcbsp1 to 3, so that may needs some special handling in the hwmod code as it's currently trying to look up mcbsp2_sidetone and mcbsp3_sidetone entries. Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3.dtsi | 42 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index f3a0c26ed0c2..daabf99d402a 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -82,6 +82,13 @@ ranges; ti,hwmods = "l3_main"; + aes: aes@480c5000 { + compatible = "ti,omap3-aes"; + ti,hwmods = "aes"; + reg = <0x480c5000 0x50>; + interrupts = <0>; + }; + counter32k: counter@48320000 { compatible = "ti,omap-counter32k"; reg = <0x48320000 0x20>; @@ -260,6 +267,13 @@ ti,hwmods = "i2c3"; }; + mailbox: mailbox@48094000 { + compatible = "ti,omap3-mailbox"; + ti,hwmods = "mailbox"; + reg = <0x48094000 0x200>; + interrupts = <26>; + }; + mcspi1: spi@48098000 { compatible = "ti,omap2-mcspi"; reg = <0x48098000 0x100>; @@ -357,6 +371,13 @@ dma-names = "tx", "rx"; }; + mmu_isp: mmu@480bd400 { + compatible = "ti,omap3-mmu-isp"; + ti,hwmods = "mmu_isp"; + reg = <0x480bd400 0x80>; + interrupts = <8>; + }; + wdt2: wdt@48314000 { compatible = "ti,omap3-wdt"; reg = <0x48314000 0x80>; @@ -442,6 +463,27 @@ dma-names = "tx", "rx"; }; + sham: sham@480c3000 { + compatible = "ti,omap3-sham"; + ti,hwmods = "sham"; + reg = <0x480c3000 0x64>; + interrupts = <49>; + }; + + smartreflex_core: smartreflex@480cb000 { + compatible = "ti,omap3-smartreflex-core"; + ti,hwmods = "smartreflex_core"; + reg = <0x480cb000 0x400>; + interrupts = <19>; + }; + + smartreflex_mpu_iva: smartreflex@480c9000 { + compatible = "ti,omap3-smartreflex-iva"; + ti,hwmods = "smartreflex_mpu_iva"; + reg = <0x480c9000 0x400>; + interrupts = <18>; + }; + timer1: timer@48318000 { compatible = "ti,omap3430-timer"; reg = <0x48318000 0x400>; -- cgit v1.2.3 From 26f67a31265d459aa6f93b0a1ecbd64e7435519d Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 25 Nov 2013 14:23:45 -0800 Subject: ARM: OMAP2+: Add fixed regulator to omap2plus_defconfig We do not have REGULATOR_FIXED selected if no boards are selected and we boot with device tree. This can cause various devices to fail. Signed-off-by: Tony Lindgren --- arch/arm/configs/omap2plus_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 98a50c309b90..bfa80a11e8c7 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -173,6 +173,7 @@ CONFIG_MFD_PALMAS=y CONFIG_MFD_TPS65217=y CONFIG_MFD_TPS65910=y CONFIG_TWL6040_CORE=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_PALMAS=y CONFIG_REGULATOR_TPS65023=y CONFIG_REGULATOR_TPS6507X=y -- cgit v1.2.3 From edd5eb4e99e4153ea7be05390fda542d986bf28d Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 25 Nov 2013 14:23:45 -0800 Subject: ARM: OMAP2+: Fix eMMC on n900 with device tree Looks like we need to configure the regulators and use the pdata quirk to make eMMC work with device tree. It seems that mostly vaux3 is used, and only some earlier revisions used vmmc2. This has been tested to work on devices where the system_rev passed by the bootloader has versions 0x0010, 0x2101 and 0x2204. Cc: devicetree@vger.kernel.org Cc: Pavel Machek Cc: Aaro Koskinen Signed-off-by: Sebastian Reichel [tony@atomide.com: updated with pinctrl changes and comments from Sebastian] Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-n900.dts | 23 ++++++++++++++++++++++- arch/arm/mach-omap2/pdata-quirks.c | 1 + 2 files changed, 23 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index c4f20bfe4cce..c2c306d13b87 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -125,6 +125,21 @@ >; }; + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + 0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */ + 0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */ + 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */ + 0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */ + 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */ + 0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */ + 0x134 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat4 */ + 0x136 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat5 */ + 0x138 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat6 */ + 0x13a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat7 */ + >; + }; + display_pins: pinmux_display_pins { pinctrl-single,pins = < 0x0d4 (PIN_OUTPUT | MUX_MODE4) /* RX51_LCD_RESET_GPIO */ @@ -358,8 +373,14 @@ cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */ }; +/* most boards use vaux3, only some old versions use vmmc2 instead */ &mmc2 { - status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <&vaux3>; + vmmc_aux-supply = <&vsim>; + bus-width = <8>; + non-removable; }; &mmc3 { diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index 10c71450cf63..39f020c982e8 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -139,6 +139,7 @@ struct of_dev_auxdata omap_auxdata_lookup[] __initdata = { static struct pdata_init pdata_quirks[] __initdata = { #ifdef CONFIG_ARCH_OMAP3 + { "nokia,omap3-n900", hsmmc2_internal_input_clk, }, { "nokia,omap3-n9", hsmmc2_internal_input_clk, }, { "nokia,omap3-n950", hsmmc2_internal_input_clk, }, { "isee,omap3-igep0020", omap3_igep0020_legacy_init, }, -- cgit v1.2.3 From c37dd677988ca50bc8bc60ab5ab053720583c168 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Mon, 11 Nov 2013 20:41:38 +0200 Subject: ARM: OMAPFB: panel-sony-acx565akm: fix bad unlock balance When booting Nokia N900 smartphone with v3.12 + omap2plus_defconfig (LOCKDEP enabled) and CONFIG_DISPLAY_PANEL_SONY_ACX565AKM enabled, the following BUG is seen during the boot: [ 7.302154] ===================================== [ 7.307128] [ BUG: bad unlock balance detected! ] [ 7.312103] 3.12.0-los.git-2093492-00120-g5e01dc7 #3 Not tainted [ 7.318450] ------------------------------------- [ 7.323425] kworker/u2:1/12 is trying to release lock (&ddata->mutex) at: [ 7.330657] [] acx565akm_enable+0x12c/0x18c [ 7.335998] but there are no more locks to release! Fix by removing double unlock and handling the locking completely inside acx565akm_panel_power_on() when doing the power on. Reported-by: Eduardo Valentin Signed-off-by: Aaro Koskinen Cc: stable@vger.kernel.org Signed-off-by: Tomi Valkeinen --- drivers/video/omap2/displays-new/panel-sony-acx565akm.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/video/omap2/displays-new/panel-sony-acx565akm.c b/drivers/video/omap2/displays-new/panel-sony-acx565akm.c index e6d56f714ae4..d94f35dbd536 100644 --- a/drivers/video/omap2/displays-new/panel-sony-acx565akm.c +++ b/drivers/video/omap2/displays-new/panel-sony-acx565akm.c @@ -526,6 +526,8 @@ static int acx565akm_panel_power_on(struct omap_dss_device *dssdev) struct omap_dss_device *in = ddata->in; int r; + mutex_lock(&ddata->mutex); + dev_dbg(&ddata->spi->dev, "%s\n", __func__); in->ops.sdi->set_timings(in, &ddata->videomode); @@ -614,10 +616,7 @@ static int acx565akm_enable(struct omap_dss_device *dssdev) if (omapdss_device_is_enabled(dssdev)) return 0; - mutex_lock(&ddata->mutex); r = acx565akm_panel_power_on(dssdev); - mutex_unlock(&ddata->mutex); - if (r) return r; -- cgit v1.2.3 From 6c5dc7f8afbd2f480ebe9ff6919c6420fcf1abd6 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Mon, 18 Nov 2013 15:20:01 +1100 Subject: crypto: caam - Add missing Job Ring include linuxnext currently doesn't compile with the powerpc mpc85xx_defconfig giving: drivers/crypto/caam/jr.c: In function 'caam_jr_probe': drivers/crypto/caam/jr.c:468:2: error: implicit declaration of function 'of_iomap' [-Werror=implicit-function-declaration] In: commit 313ea293e9c4d1eabcaddd2c0800f083b03c2a2e Author: Ruchika Gupta crypto: caam - Add Platform driver for Job Ring We added a reference to of_iomap but did add the necessary include file. The below adds this include. Signed-off-by: Michael Neuling Acked-by: Ruchika Gupta Signed-off-by: Herbert Xu --- drivers/crypto/caam/jr.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/crypto/caam/jr.c b/drivers/crypto/caam/jr.c index d23356d20e1c..1d80bd3636c5 100644 --- a/drivers/crypto/caam/jr.c +++ b/drivers/crypto/caam/jr.c @@ -6,6 +6,7 @@ */ #include +#include #include "compat.h" #include "regs.h" -- cgit v1.2.3 From 1a3e5173f5e72cbf7f0c8927b33082e361c16d72 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Mon, 25 Nov 2013 22:15:20 +0100 Subject: can: flexcan: use correct clock as base for bit rate calculation The flexcan IP core uses the peripheral clock ("per") as basic clock for the bit timing calculation. However the driver uses the the wrong clock ("ipg"). This leads to wrong bit rates if the rates on both clock are different. This patch fixes the problem by using the correct clock for the bit rate calculation. Cc: linux-stable Signed-off-by: Marc Kleine-Budde --- drivers/net/can/flexcan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index ae08cf129ebb..aaed97bee471 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -1020,13 +1020,13 @@ static int flexcan_probe(struct platform_device *pdev) dev_err(&pdev->dev, "no ipg clock defined\n"); return PTR_ERR(clk_ipg); } - clock_freq = clk_get_rate(clk_ipg); clk_per = devm_clk_get(&pdev->dev, "per"); if (IS_ERR(clk_per)) { dev_err(&pdev->dev, "no per clock defined\n"); return PTR_ERR(clk_per); } + clock_freq = clk_get_rate(clk_per); } mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); -- cgit v1.2.3 From 2ab68ec927310dc488f3403bb48f9e4ad00a9491 Mon Sep 17 00:00:00 2001 From: Sasha Levin Date: Tue, 19 Nov 2013 14:25:36 -0500 Subject: video: kyro: fix incorrect sizes when copying to userspace kyro would copy u32s and specify sizeof(unsigned long) as the size to copy. This would copy more data than intended and cause memory corruption and might leak kernel memory. Signed-off-by: Sasha Levin Signed-off-by: Tomi Valkeinen --- drivers/video/kyro/fbdev.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/video/kyro/fbdev.c b/drivers/video/kyro/fbdev.c index 50c857477e4f..65041e15fd59 100644 --- a/drivers/video/kyro/fbdev.c +++ b/drivers/video/kyro/fbdev.c @@ -624,15 +624,15 @@ static int kyrofb_ioctl(struct fb_info *info, return -EINVAL; } case KYRO_IOCTL_UVSTRIDE: - if (copy_to_user(argp, &deviceInfo.ulOverlayUVStride, sizeof(unsigned long))) + if (copy_to_user(argp, &deviceInfo.ulOverlayUVStride, sizeof(deviceInfo.ulOverlayUVStride))) return -EFAULT; break; case KYRO_IOCTL_STRIDE: - if (copy_to_user(argp, &deviceInfo.ulOverlayStride, sizeof(unsigned long))) + if (copy_to_user(argp, &deviceInfo.ulOverlayStride, sizeof(deviceInfo.ulOverlayStride))) return -EFAULT; break; case KYRO_IOCTL_OVERLAY_OFFSET: - if (copy_to_user(argp, &deviceInfo.ulOverlayOffset, sizeof(unsigned long))) + if (copy_to_user(argp, &deviceInfo.ulOverlayOffset, sizeof(deviceInfo.ulOverlayOffset))) return -EFAULT; break; } -- cgit v1.2.3 From 974dbcfcca1ee88279e274051e1719b4980ebdb3 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 6 Nov 2013 09:57:27 +0100 Subject: fbdev: sh_mobile_meram: Fix defined but not used compiler warnings MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If both CONFIG_PM_SLEEP and CONFIG_PM_RUNTIME are not set: drivers/video/sh_mobile_meram.c:573: warning: ‘sh_mobile_meram_suspend’ defined but not used drivers/video/sh_mobile_meram.c:597: warning: ‘sh_mobile_meram_resume’ defined but not used Signed-off-by: Geert Uytterhoeven Acked-by: Laurent Pinchart Signed-off-by: Tomi Valkeinen --- drivers/video/sh_mobile_meram.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/video/sh_mobile_meram.c b/drivers/video/sh_mobile_meram.c index e0f098562a74..a297de5cc859 100644 --- a/drivers/video/sh_mobile_meram.c +++ b/drivers/video/sh_mobile_meram.c @@ -569,6 +569,7 @@ EXPORT_SYMBOL_GPL(sh_mobile_meram_cache_update); * Power management */ +#if defined(CONFIG_PM_SLEEP) || defined(CONFIG_PM_RUNTIME) static int sh_mobile_meram_suspend(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); @@ -611,6 +612,7 @@ static int sh_mobile_meram_resume(struct device *dev) meram_write_reg(priv->base, common_regs[i], priv->regs[i]); return 0; } +#endif /* CONFIG_PM_SLEEP || CONFIG_PM_RUNTIME */ static UNIVERSAL_DEV_PM_OPS(sh_mobile_meram_dev_pm_ops, sh_mobile_meram_suspend, -- cgit v1.2.3 From 427bfe07e6744c058ce6fc4aa187cda96b635539 Mon Sep 17 00:00:00 2001 From: Tim Gardner Date: Thu, 14 Nov 2013 14:29:52 -0700 Subject: xen-blkfront: Silence pfn maybe-uninitialized warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit pfn cannot actually be used unless (!info->feature_persistent), nor is pfn accessed in get_grant() unless (!info->feature_persistent), but silence this warning anyway. gcc-4.8 drivers/block/xen-blkfront.c: In function 'do_blkif_request': drivers/block/xen-blkfront.c:508:20: warning: 'pfn' may be used uninitialized in this function [-Wmaybe-uninitialized] gnt_list_entry = get_grant(&gref_head, pfn, info); ^ drivers/block/xen-blkfront.c:492:19: note: 'pfn' was declared here unsigned long pfn; Cc: Konrad Rzeszutek Wilk Cc: Boris Ostrovsky Cc: David Vrabel Signed-off-by: Tim Gardner Signed-off-by: Konrad Rzeszutek Wilk Acked-by: Roger Pau Monné --- drivers/block/xen-blkfront.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index 432db1b59b00..5f926de61950 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -489,7 +489,7 @@ static int blkif_queue_request(struct request *req) if ((ring_req->operation == BLKIF_OP_INDIRECT) && (i % SEGS_PER_INDIRECT_FRAME == 0)) { - unsigned long pfn; + unsigned long uninitialized_var(pfn); if (segments) kunmap_atomic(segments); -- cgit v1.2.3 From 2f089cb89d2f47702c31bd584c12badc88bbe17c Mon Sep 17 00:00:00 2001 From: Felipe Pena Date: Sat, 9 Nov 2013 13:36:09 -0200 Subject: block: xen-blkfront: Fix possible NULL ptr dereference In the blkif_release function the bdget_disk() call might returns a NULL ptr which might be dereferenced on bdev->bd_openers checking Signed-off-by: Felipe Pena Signed-off-by: Konrad Rzeszutek Wilk [v2: Added WARN per Roger's suggestion] --- drivers/block/xen-blkfront.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index 5f926de61950..c4a4c9006288 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -2011,6 +2011,10 @@ static void blkif_release(struct gendisk *disk, fmode_t mode) bdev = bdget_disk(disk, 0); + if (!bdev) { + WARN(1, "Block device %s yanked out from us!\n", disk->disk_name); + goto out_mutex; + } if (bdev->bd_openers) goto out; @@ -2041,6 +2045,7 @@ static void blkif_release(struct gendisk *disk, fmode_t mode) out: bdput(bdev); +out_mutex: mutex_unlock(&blkfront_mutex); } -- cgit v1.2.3 From c297c8b99b07f496ff69a719cfb8e8fe852832ed Mon Sep 17 00:00:00 2001 From: Andy Adamson Date: Wed, 20 Nov 2013 13:00:17 -0500 Subject: SUNRPC: do not fail gss proc NULL calls with EACCES Otherwise RPCSEC_GSS_DESTROY messages are not sent. Signed-off-by: Andy Adamson Signed-off-by: Trond Myklebust --- net/sunrpc/auth_gss/auth_gss.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/sunrpc/auth_gss/auth_gss.c b/net/sunrpc/auth_gss/auth_gss.c index 97912b40c254..42fdfc634e56 100644 --- a/net/sunrpc/auth_gss/auth_gss.c +++ b/net/sunrpc/auth_gss/auth_gss.c @@ -1517,7 +1517,7 @@ out: static int gss_refresh_null(struct rpc_task *task) { - return -EACCES; + return 0; } static __be32 * -- cgit v1.2.3 From 14883a75ec76b44759385fb12629f4a0f1aef4e3 Mon Sep 17 00:00:00 2001 From: Matt Wilson Date: Wed, 20 Nov 2013 12:11:35 -0800 Subject: xen/gnttab: leave lazy MMU mode in the case of a m2p override failure Commit f62805f1 introduced a bug where lazy MMU mode isn't exited if a m2p_add/remove_override call fails. Acked-by: Stefano Stabellini Cc: Boris Ostrovsky Reviewed-by: David Vrabel Reviewed-by: Anthony Liguori Cc: xen-devel@lists.xenproject.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Matt Wilson Signed-off-by: Konrad Rzeszutek Wilk CC: stable@vger.kernel.org --- drivers/xen/grant-table.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/xen/grant-table.c b/drivers/xen/grant-table.c index 62ccf5424ba8..028387192b60 100644 --- a/drivers/xen/grant-table.c +++ b/drivers/xen/grant-table.c @@ -930,9 +930,10 @@ int gnttab_map_refs(struct gnttab_map_grant_ref *map_ops, ret = m2p_add_override(mfn, pages[i], kmap_ops ? &kmap_ops[i] : NULL); if (ret) - return ret; + goto out; } + out: if (lazy) arch_leave_lazy_mmu_mode(); @@ -969,9 +970,10 @@ int gnttab_unmap_refs(struct gnttab_unmap_grant_ref *unmap_ops, ret = m2p_remove_override(pages[i], kmap_ops ? &kmap_ops[i] : NULL); if (ret) - return ret; + goto out; } + out: if (lazy) arch_leave_lazy_mmu_mode(); -- cgit v1.2.3 From a09b5add6f2458486df42a4431a0599f18fa8f52 Mon Sep 17 00:00:00 2001 From: Andi Shyti Date: Thu, 18 Jul 2013 21:35:30 +0200 Subject: u8500_defconfig: allow creation and mounting of devtmpfs This patch enables CONFIG_DETTMPFS and CONFIG_DEVTMPFS_MOUNT flags for u8500 based devices. In this way it's possible to create a tmpfs/ramfs already in the early stages of the boot, allowing programs like udev/mdev to populate the /dev directory. Signed-off-by: Andi Shyti Signed-off-by: Linus Walleij --- arch/arm/configs/u8500_defconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index ac632cc38f24..3738cd695132 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -109,6 +109,8 @@ CONFIG_EXT2_FS_SECURITY=y CONFIG_EXT3_FS=y CONFIG_EXT4_FS=y CONFIG_VFAT_FS=y +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_MISC_FILESYSTEMS is not set -- cgit v1.2.3 From 59b023e9bf62933f7078dec339b110d5785f63f6 Mon Sep 17 00:00:00 2001 From: Daniel Lezcano Date: Mon, 30 Sep 2013 13:36:36 +0200 Subject: ARM: ux500: u8500_defconfig: add missing cpuidle option With the commit d3f2950f2adeea3da0317e952914b59adaa4cdb3, the option ARM_U8500_CPUIDLE was added to the Kconfig but not reflected in the default config file, hence the cpuidle driver is no longer enabled since this commit. Enable it again by adding the missing option in the default config file. Signed-off-by: Daniel Lezcano Signed-off-by: Linus Walleij --- arch/arm/configs/u8500_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index 3738cd695132..c6ebc184bf68 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -22,6 +22,7 @@ CONFIG_CMDLINE="root=/dev/ram0 console=ttyAMA2,115200n8" CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_IDLE=y +CONFIG_ARM_U8500_CPUIDLE=y CONFIG_VFP=y CONFIG_NEON=y CONFIG_PM_RUNTIME=y -- cgit v1.2.3 From 1f202dea74713589f2af29f1dba3ac6de043618a Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 13 Nov 2013 09:28:53 +0100 Subject: Revert "ARM: ux500: Remove AUXDATA relating to SDI (MMC) clock-name bindings" This reverts commit ce16feb8510cbbcd090c2320c35db2fbbffde210. This commit stopped tying down the name of the MMC/SD devices, but these names are used in the pin control table, so the MMC/SD cards stopped working. Cc: Lee Jones Reviewed-by: Ulf Hansson Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/cpu-db8500.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 2e85c1e72535..8e7e60d2a429 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -140,6 +140,10 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { /* Requires call-back bindings. */ OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata), /* Requires DMA bindings. */ + OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", NULL), + OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1", NULL), + OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2", NULL), + OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4", NULL), OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000, "ux500-msp-i2s.0", &msp0_platform_data), OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000, -- cgit v1.2.3 From 5281973012bdcfd93a8f6e0f5b4e04af0038ea99 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 13 Nov 2013 09:33:36 +0100 Subject: Revert "ARM: ux500: Stop passing MMC's platform data for Device Tree boots" This reverts commit 49c129519a7a8840767321c38d2eaf84a263529b. The special settings for the SD/MMC card parameters that are not yet fully agreed upon how to encode into the device tree went missing with this commit. We need to first put it into the device tree, and then remove the platform data. Cc: Lee Jones Reviewed-by: Ulf Hansson Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/cpu-db8500.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 8e7e60d2a429..12c7e5c03ea4 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -140,10 +140,10 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { /* Requires call-back bindings. */ OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata), /* Requires DMA bindings. */ - OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", NULL), - OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1", NULL), - OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2", NULL), - OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4", NULL), + OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", &mop500_sdi0_data), + OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1", &mop500_sdi1_data), + OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2", &mop500_sdi2_data), + OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4", &mop500_sdi4_data), OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000, "ux500-msp-i2s.0", &msp0_platform_data), OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000, -- cgit v1.2.3 From 912e663127c5f700da6805ce21635dce703cb2cc Mon Sep 17 00:00:00 2001 From: Joel Fernandes Date: Tue, 26 Nov 2013 15:03:36 -0800 Subject: ARM: OMAP2+: Disable POSTED mode for errata i103 and i767 Enabling of Posted mode is seen to cause problems on dmtimer modules on AM33xx (much like other OMAPs). Reference discussions on forums [1] [2]. Earlier patch solving this on other OMAPs [3]. For OMAP SoCs with this errata, the fix has been to not enable Posted mode. However, on some SoCs (atleast AM33xx) which carry this errata, Posted mode is enabled on reset. So we not only need to ignore enabling of the POSTED bit when the timer is requested, but also disable Posted mode if errata is present. [1] http://e2e.ti.com/support/arm/sitara_arm/f/791/t/285744.aspx [2] http://e2e.ti.com/support/arm/sitara_arm/f/791/t/270632.aspx [3] http://www.spinics.net/lists/linux-omap/msg81770.html Cc: stable@vgerk.kernel.org Reported-by: Russ Dill Cc: Santosh Shilimkar Signed-off-by: Joel Fernandes Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/plat/dmtimer.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h index fb92abb91628..2861b155485a 100644 --- a/arch/arm/plat-omap/include/plat/dmtimer.h +++ b/arch/arm/plat-omap/include/plat/dmtimer.h @@ -336,8 +336,11 @@ static inline void __omap_dm_timer_enable_posted(struct omap_dm_timer *timer) if (timer->posted) return; - if (timer->errata & OMAP_TIMER_ERRATA_I103_I767) + if (timer->errata & OMAP_TIMER_ERRATA_I103_I767) { + timer->posted = OMAP_TIMER_NONPOSTED; + __omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG, 0, 0); return; + } __omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG, OMAP_TIMER_CTRL_POSTED, 0); -- cgit v1.2.3 From 11d3a7d6d4c1df43240cc8b8aaa2dcff4e3fe072 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Tue, 26 Nov 2013 15:03:36 -0800 Subject: ARM: OMAP2+: dss-common: change IGEP's DVI DDC i2c bus IGEP's DVI connector's DDC pins are connected to OMAP's third i2c bus. When booting with Device Trees the requested bus number is set to -1 which means that the bus number should be dynamically assigned. So the third i2c bus has 2 has a bus number. Since now only DT booting is supported for IGEP boards after commit 06ff74fd ("ARM: OMAP2+: remove legacy support for IGEP boards"), the i2c bus number has to be changed. Signed-off-by: Javier Martinez Canillas Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/dss-common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/dss-common.c b/arch/arm/mach-omap2/dss-common.c index 365bfd3d9c68..dadccc91488c 100644 --- a/arch/arm/mach-omap2/dss-common.c +++ b/arch/arm/mach-omap2/dss-common.c @@ -223,7 +223,7 @@ void __init omap_4430sdp_display_init_of(void) static struct connector_dvi_platform_data omap3_igep2_dvi_connector_pdata = { .name = "dvi", .source = "tfp410.0", - .i2c_bus_num = 3, + .i2c_bus_num = 2, }; static struct platform_device omap3_igep2_dvi_connector_device = { -- cgit v1.2.3 From 8559133d82560a8b1f5d32419c6c829d81b89fb1 Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Tue, 26 Nov 2013 15:03:36 -0800 Subject: ARM: dts: omap3-igep: Fix bus-width for mmc1 Both, IGEPv2 and IGEP COM MODULE have a bus-width of 4 not 8, so fix this and do not mux data pins from mmc1_data4 to mmc1_data7. Signed-off-by: Enric Balletbo i Serra Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-igep.dtsi | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index ba1e58b7b7e3..d4fecce91066 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -65,10 +65,6 @@ 0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ 0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ 0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ - 0x120 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat4.sdmmc1_dat4 */ - 0x122 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat5.sdmmc1_dat5 */ - 0x124 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat6.sdmmc1_dat6 */ - 0x126 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat7.sdmmc1_dat7 */ >; }; @@ -114,7 +110,7 @@ pinctrl-0 = <&mmc1_pins>; vmmc-supply = <&vmmc1>; vmmc_aux-supply = <&vsim>; - bus-width = <8>; + bus-width = <4>; }; &mmc2 { -- cgit v1.2.3 From 0e9fd77771d0a0c3318905d33f29eec7680dfe5e Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Tue, 26 Nov 2013 15:03:37 -0800 Subject: ARM: dts: omap3-igep: Add support for LBEE1USJYC WiFi connected to SDIO The LBEE1USJYC is a WiFi/BT combo module used on OMAP3-based IGEP boards. In both cases, IGEPv2 Rev. C and IGEP COM MODULE, the module is connected using the same MMC interface and uses the same GPIOs. Signed-off-by: Enric Balletbo i Serra Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-igep.dtsi | 45 ++++++++++++++++++++++++++++++++++++++- 1 file changed, 44 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index d4fecce91066..b3517b2910a5 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -24,6 +24,25 @@ ti,mcbsp = <&mcbsp2>; ti,codec = <&twl_audio>; }; + + vdd33: regulator-vdd33 { + compatible = "regulator-fixed"; + regulator-name = "vdd33"; + regulator-always-on; + }; + + lbee1usjyc_vmmc: lbee1usjyc_vmmc { + pinctrl-names = "default"; + pinctrl-0 = <&lbee1usjyc_pins>; + compatible = "regulator-fixed"; + regulator-name = "regulator-lbee1usjyc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>; /* gpio_138 WIFI_PDN */ + startup-delay-us = <10000>; + enable-active-high; + vin-supply = <&vdd33>; + }; }; &omap3_pmx_core { @@ -48,6 +67,15 @@ >; }; + /* WiFi/BT combo */ + lbee1usjyc_pins: pinmux_lbee1usjyc_pins { + pinctrl-single,pins = < + 0x136 (PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat5.gpio_137 */ + 0x138 (PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat6.gpio_138 */ + 0x13a (PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 */ + >; + }; + mcbsp2_pins: pinmux_mcbsp2_pins { pinctrl-single,pins = < 0x10c (PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */ @@ -68,6 +96,17 @@ >; }; + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + 0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ + 0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ + 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */ + 0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */ + 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */ + 0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */ + >; + }; + smsc911x_pins: pinmux_smsc911x_pins { pinctrl-single,pins = < 0x1a2 (PIN_INPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */ @@ -114,7 +153,11 @@ }; &mmc2 { - status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <&lbee1usjyc_vmmc>; + bus-width = <4>; + non-removable; }; &mmc3 { -- cgit v1.2.3 From 9aa36dfd3d9a1c9e305e53f5c0915036c3941a3f Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Tue, 26 Nov 2013 15:03:37 -0800 Subject: ARM: dts: omap3-igep: Update to use the TI AM/DM37x processor Most of the boards are using the TI AM/DM37x processor, there is only a small quantity of IGEP Processor Boards based on TI OMAP3530. So it's better use the omap36xx.dtsi include instead of omap34xx.dtsi include. We can add support for the 34xx based variant later on as needed. To avoid confusion we have added to the model the (TI AM/DM37x) comment. Signed-off-by: Enric Balletbo i Serra [tony@atomide.com: updated comments for the 34xx to 36xx include change] Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-igep.dtsi | 4 ++-- arch/arm/boot/dts/omap3-igep0020.dts | 4 ++-- arch/arm/boot/dts/omap3-igep0030.dts | 4 ++-- 3 files changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index b3517b2910a5..e4c87693b100 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -1,5 +1,5 @@ /* - * Device Tree Source for IGEP Technology devices + * Common device tree for IGEP boards based on AM/DM37x * * Copyright (C) 2012 Javier Martinez Canillas * Copyright (C) 2012 Enric Balletbo i Serra @@ -10,7 +10,7 @@ */ /dts-v1/; -#include "omap34xx.dtsi" +#include "omap36xx.dtsi" / { memory { diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts index d5cc79267250..33ce1236e96e 100644 --- a/arch/arm/boot/dts/omap3-igep0020.dts +++ b/arch/arm/boot/dts/omap3-igep0020.dts @@ -1,5 +1,5 @@ /* - * Device Tree Source for IGEPv2 board + * Device Tree Source for IGEPv2 Rev. (TI OMAP AM/DM37x) * * Copyright (C) 2012 Javier Martinez Canillas * Copyright (C) 2012 Enric Balletbo i Serra @@ -13,7 +13,7 @@ #include "omap-gpmc-smsc911x.dtsi" / { - model = "IGEPv2"; + model = "IGEPv2 (TI OMAP AM/DM37x)"; compatible = "isee,omap3-igep0020", "ti,omap3"; leds { diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts index 525e6d9b0978..02a23f8a3384 100644 --- a/arch/arm/boot/dts/omap3-igep0030.dts +++ b/arch/arm/boot/dts/omap3-igep0030.dts @@ -1,5 +1,5 @@ /* - * Device Tree Source for IGEP COM Module + * Device Tree Source for IGEP COM MODULE (TI OMAP AM/DM37x) * * Copyright (C) 2012 Javier Martinez Canillas * Copyright (C) 2012 Enric Balletbo i Serra @@ -12,7 +12,7 @@ #include "omap3-igep.dtsi" / { - model = "IGEP COM Module"; + model = "IGEP COM MODULE (TI OMAP AM/DM37x)"; compatible = "isee,omap3-igep0030", "ti,omap3"; leds { -- cgit v1.2.3 From d526daebfd88706b52573325920dac33d14a5f6c Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Tue, 26 Nov 2013 15:03:37 -0800 Subject: ARM: dts: omap3-igep0020: Add pinmux setup for i2c devices Add pin muxing support for IGEP boards i2c controllers. Signed-off-by: Javier Martinez Canillas Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-igep.dtsi | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index e4c87693b100..165aaf7591ba 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -113,10 +113,33 @@ >; }; + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + 0x18a (PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */ + 0x18c (PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */ + >; + }; + + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + 0x18e (PIN_INPUT | MUX_MODE0) /* i2c2_scl.i2c2_scl */ + 0x190 (PIN_INPUT | MUX_MODE0) /* i2c2_sda.i2c2_sda */ + >; + }; + + i2c3_pins: pinmux_i2c3_pins { + pinctrl-single,pins = < + 0x192 (PIN_INPUT | MUX_MODE0) /* i2c3_scl.i2c3_scl */ + 0x194 (PIN_INPUT | MUX_MODE0) /* i2c3_sda.i2c3_sda */ + >; + }; + leds_pins: pinmux_leds_pins { }; }; &i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; clock-frequency = <2600000>; twl: twl@48 { @@ -136,9 +159,16 @@ #include "twl4030_omap3.dtsi" &i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; clock-frequency = <400000>; }; +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; +}; + &mcbsp2 { pinctrl-names = "default"; pinctrl-0 = <&mcbsp2_pins>; -- cgit v1.2.3 From 50592dc30ca3617b7b66abd7071930e2489bff26 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Tue, 26 Nov 2013 15:03:38 -0800 Subject: ARM: dts: omap3-igep0020: Add pinmuxing for DVI output The IGEPv2 has a TFP410 DPI-to-DVI encoder attached to OMAP's Display SubSystem (DSS). Add mux setup for DSS pins and also for the GPIO 170 pin that is used to ensure that the DVI-D is powered down on power up. Signed-off-by: Javier Martinez Canillas Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-igep0020.dts | 41 ++++++++++++++++++++++++++++++++++++ 1 file changed, 41 insertions(+) diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts index 33ce1236e96e..b9a9e17acb58 100644 --- a/arch/arm/boot/dts/omap3-igep0020.dts +++ b/arch/arm/boot/dts/omap3-igep0020.dts @@ -67,6 +67,8 @@ pinctrl-names = "default"; pinctrl-0 = < &hsusbb1_pins + &tfp410_pins + &dss_pins >; hsusbb1_pins: pinmux_hsusbb1_pins { @@ -85,6 +87,45 @@ 0x5ba (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d7.hsusb1_data3 */ >; }; + + tfp410_pins: tfp410_dvi_pins { + pinctrl-single,pins = < + 0x196 (PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */ + >; + }; + + dss_pins: pinmux_dss_dvi_pins { + pinctrl-single,pins = < + 0x0a4 (PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ + 0x0a6 (PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ + 0x0a8 (PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ + 0x0aa (PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ + 0x0ac (PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ + 0x0ae (PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ + 0x0b0 (PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ + 0x0b2 (PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ + 0x0b4 (PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ + 0x0b6 (PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ + 0x0b8 (PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ + 0x0ba (PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ + 0x0bc (PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ + 0x0be (PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ + 0x0c0 (PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ + 0x0c2 (PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ + 0x0c4 (PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ + 0x0c6 (PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ + 0x0c8 (PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ + 0x0ca (PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ + 0x0cc (PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ + 0x0ce (PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ + 0x0d0 (PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ + 0x0d2 (PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ + 0x0d4 (PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ + 0x0d6 (PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ + 0x0d8 (PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ + 0x0da (PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ + >; + }; }; &leds_pins { -- cgit v1.2.3 From 0710b679862dc730eb9900592649929da3ec824e Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Tue, 26 Nov 2013 15:03:38 -0800 Subject: ARM: dts: AM33XX BASE0033: add pinmux and hdmi node to enable display Enable the hdmi output and the LCD Controller on IGEP AQUILA. Also configure the correct pinmux for output of video data from the SoC to the HDMI encoder. Signed-off-by: Enric Balletbo i Serra Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-base0033.dts | 46 +++++++++++++++++++++++++++++++++++ 1 file changed, 46 insertions(+) diff --git a/arch/arm/boot/dts/am335x-base0033.dts b/arch/arm/boot/dts/am335x-base0033.dts index b4f95c2bbf74..620970c0c99a 100644 --- a/arch/arm/boot/dts/am335x-base0033.dts +++ b/arch/arm/boot/dts/am335x-base0033.dts @@ -13,4 +13,50 @@ / { model = "IGEP COM AM335x on AQUILA Expansion"; compatible = "isee,am335x-base0033", "isee,am335x-igep0033", "ti,am33xx"; + + hdmi { + compatible = "ti,tilcdc,slave"; + i2c = <&i2c0>; + pinctrl-names = "default", "off"; + pinctrl-0 = <&nxp_hdmi_pins>; + pinctrl-1 = <&nxp_hdmi_off_pins>; + status = "okay"; + }; +}; + +&am33xx_pinmux { + nxp_hdmi_pins: pinmux_nxp_hdmi_pins { + pinctrl-single,pins = < + 0x1b0 (PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */ + 0xa0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data0 */ + 0xa4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data1 */ + 0xa8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data2 */ + 0xac (PIN_OUTPUT | MUX_MODE0) /* lcd_data3 */ + 0xb0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data4 */ + 0xb4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data5 */ + 0xb8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data6 */ + 0xbc (PIN_OUTPUT | MUX_MODE0) /* lcd_data7 */ + 0xc0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data8 */ + 0xc4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data9 */ + 0xc8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data10 */ + 0xcc (PIN_OUTPUT | MUX_MODE0) /* lcd_data11 */ + 0xd0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data12 */ + 0xd4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data13 */ + 0xd8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data14 */ + 0xdc (PIN_OUTPUT | MUX_MODE0) /* lcd_data15 */ + 0xe0 (PIN_OUTPUT | MUX_MODE0) /* lcd_vsync */ + 0xe4 (PIN_OUTPUT | MUX_MODE0) /* lcd_hsync */ + 0xe8 (PIN_OUTPUT | MUX_MODE0) /* lcd_pclk */ + 0xec (PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en */ + >; + }; + nxp_hdmi_off_pins: pinmux_nxp_hdmi_off_pins { + pinctrl-single,pins = < + 0x1b0 (PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */ + >; + }; +}; + +&lcdc { + status = "okay"; }; -- cgit v1.2.3 From f3689fd6dd30974d5b5ccf1daea964440ca5955f Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Tue, 26 Nov 2013 15:03:38 -0800 Subject: ARM: dts: AM33XX BASE0033: add pinmux and user led support Enable the user leds on the IGEP AQUILA EXPANSION. The has two leds, one green and one red, that are controllable by software. Signed-off-by: Enric Balletbo i Serra Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-base0033.dts | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/arch/arm/boot/dts/am335x-base0033.dts b/arch/arm/boot/dts/am335x-base0033.dts index 620970c0c99a..ffae1482d954 100644 --- a/arch/arm/boot/dts/am335x-base0033.dts +++ b/arch/arm/boot/dts/am335x-base0033.dts @@ -22,6 +22,25 @@ pinctrl-1 = <&nxp_hdmi_off_pins>; status = "okay"; }; + + leds_base { + pinctrl-names = "default"; + pinctrl-0 = <&leds_base_pins>; + + compatible = "gpio-leds"; + + led@0 { + label = "base:red:user"; + gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; /* gpio1_21 */ + default-state = "off"; + }; + + led@1 { + label = "base:green:user"; + gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>; /* gpio2_0 */ + default-state = "off"; + }; + }; }; &am33xx_pinmux { @@ -55,6 +74,13 @@ 0x1b0 (PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */ >; }; + + leds_base_pins: pinmux_leds_base_pins { + pinctrl-single,pins = < + 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ + 0x88 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn3.gpio2_0 */ + >; + }; }; &lcdc { -- cgit v1.2.3 From d8e5b2bdd3674a65f3f50fb54061516d4b6c999f Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Tue, 26 Nov 2013 15:03:38 -0800 Subject: ARM: dts: AM33XX BASE0033: add 32KBit EEPROM support The IGEP AQUILA EXPANSION has a 32KBit EEPROM for user data storage. Signed-off-by: Enric Balletbo i Serra Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-base0033.dts | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/boot/dts/am335x-base0033.dts b/arch/arm/boot/dts/am335x-base0033.dts index ffae1482d954..72a9b3fc4251 100644 --- a/arch/arm/boot/dts/am335x-base0033.dts +++ b/arch/arm/boot/dts/am335x-base0033.dts @@ -86,3 +86,10 @@ &lcdc { status = "okay"; }; + +&i2c0 { + eeprom: eeprom@50 { + compatible = "at,24c256"; + reg = <0x50>; + }; +}; -- cgit v1.2.3 From caa73370ead3160ed6cdabbfeecc5fbbda06d903 Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Tue, 26 Nov 2013 15:03:39 -0800 Subject: ARM: dts: AM33XX IGEP0033: add USB support Add node to support the USB Host and the USB OTG on the IGEP AQUILA Processor Board. Signed-off-by: Enric Balletbo i Serra Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-igep0033.dtsi | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi index 619624479311..7063311a58d9 100644 --- a/arch/arm/boot/dts/am335x-igep0033.dtsi +++ b/arch/arm/boot/dts/am335x-igep0033.dtsi @@ -199,6 +199,35 @@ pinctrl-0 = <&uart0_pins>; }; +&usb { + status = "okay"; + + control@44e10000 { + status = "okay"; + }; + + usb-phy@47401300 { + status = "okay"; + }; + + usb-phy@47401b00 { + status = "okay"; + }; + + usb@47401000 { + status = "okay"; + }; + + usb@47401800 { + status = "okay"; + dr_mode = "host"; + }; + + dma-controller@07402000 { + status = "okay"; + }; +}; + #include "tps65910.dtsi" &tps { -- cgit v1.2.3 From 2f2befd820252d05be7b1f5528a57af85338f59c Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Tue, 26 Nov 2013 15:03:39 -0800 Subject: ARM: dts: omap3-igep0020: name twl4030 VPLL2 regulator as vdds_dsi On Device Tree boot the VDDS_DSI regulator is not linked to the DPI device so omapfb driver probing fails with: [ 3.186035] OMAPFB: omapfb_probe [ 3.190704] omapdss DPI error: can't get VDDS_DSI regulator [ 3.196594] omapfb omapfb: failed to connect default display [ 3.202667] omapfb omapfb: failed to init overlay connections [ 3.208892] OMAPFB: free_resources [ 3.212493] OMAPFB: free all fbmem [ 3.216735] omapfb omapfb: failed to setup omapfb As a workaround name the VPLL2 regulator from twl4030 as vdds_dsi so getting the VDDS_DSI regulator will succeed on dpi_init_regulator(). Signed-off-by: Javier Martinez Canillas Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-igep0020.dts | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts index b9a9e17acb58..1c7e74d2d2bc 100644 --- a/arch/arm/boot/dts/omap3-igep0020.dts +++ b/arch/arm/boot/dts/omap3-igep0020.dts @@ -215,3 +215,8 @@ &usbhsehci { phys = <&hsusb1_phy>; }; + +&vpll2 { + /* Needed for DSS */ + regulator-name = "vdds_dsi"; +}; -- cgit v1.2.3 From 30023a7e4fef11c596fd7f3c323035c49dfaed85 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Tue, 26 Nov 2013 15:03:39 -0800 Subject: ARM: dts: omap3-beagle: Fix USB host on beagle boards (for 3.13) Beagle (rev. C4) and Beagle-XM (all revs) need VAUX2 1.8V supply for the USB PHY. As the generic PHY driver can't handle more than one supply at the moment, we configure this supply to be always on. This will cause a very small power impact if the USB host subsystem is not in use, about 76.86 micro-W + LDO power. Older Beagle boards (prior to C4) don't have VAUX2 connected anywhere, so there won't be any functional impact on those boards other than some additional LDO power consumption. Reported-by: Nishanth Menon Tested-by: Nishanth Menon Signed-off-by: Roger Quadros Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-beagle-xm.dts | 7 +++++++ arch/arm/boot/dts/omap3-beagle.dts | 7 +++++++ 2 files changed, 14 insertions(+) diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 31a632f7effb..df33a50bc070 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -215,3 +215,10 @@ &usbhsehci { phys = <0 &hsusb2_phy>; }; + +&vaux2 { + regulator-name = "usb_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index fa532aaacc68..4e384fcc6ad5 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -178,3 +178,10 @@ mode = <3>; power = <50>; }; + +&vaux2 { + regulator-name = "vdd_ehci"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; -- cgit v1.2.3 From 31ee9181eb92cc727876ec5a2144a1b3cbdf5bb1 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 26 Nov 2013 15:50:33 -0800 Subject: mmc: omap: Fix DMA configuration to not rely on device id We are wrongly relying on device id for the DMA configuration which can lead to wrong DMA channel being selected. Fix the issue by using the standard resources like we should. Cc: linux-mmc@vger.kernel.org Acked-by: Chris Ball Signed-off-by: Tony Lindgren --- drivers/mmc/host/omap.c | 34 ++++++++++++---------------------- 1 file changed, 12 insertions(+), 22 deletions(-) diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c index 0b10a9030f4e..22995873f554 100644 --- a/drivers/mmc/host/omap.c +++ b/drivers/mmc/host/omap.c @@ -90,17 +90,6 @@ #define OMAP_MMC_CMDTYPE_AC 2 #define OMAP_MMC_CMDTYPE_ADTC 3 -#define OMAP_DMA_MMC_TX 21 -#define OMAP_DMA_MMC_RX 22 -#define OMAP_DMA_MMC2_TX 54 -#define OMAP_DMA_MMC2_RX 55 - -#define OMAP24XX_DMA_MMC2_TX 47 -#define OMAP24XX_DMA_MMC2_RX 48 -#define OMAP24XX_DMA_MMC1_TX 61 -#define OMAP24XX_DMA_MMC1_RX 62 - - #define DRIVER_NAME "mmci-omap" /* Specifies how often in millisecs to poll for card status changes @@ -1330,7 +1319,7 @@ static int mmc_omap_probe(struct platform_device *pdev) struct mmc_omap_host *host = NULL; struct resource *res; dma_cap_mask_t mask; - unsigned sig; + unsigned sig = 0; int i, ret = 0; int irq; @@ -1407,19 +1396,20 @@ static int mmc_omap_probe(struct platform_device *pdev) host->dma_tx_burst = -1; host->dma_rx_burst = -1; - if (mmc_omap2()) - sig = host->id == 0 ? OMAP24XX_DMA_MMC1_TX : OMAP24XX_DMA_MMC2_TX; - else - sig = host->id == 0 ? OMAP_DMA_MMC_TX : OMAP_DMA_MMC2_TX; - host->dma_tx = dma_request_channel(mask, omap_dma_filter_fn, &sig); + res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx"); + if (res) + sig = res->start; + host->dma_tx = dma_request_slave_channel_compat(mask, + omap_dma_filter_fn, &sig, &pdev->dev, "tx"); if (!host->dma_tx) dev_warn(host->dev, "unable to obtain TX DMA engine channel %u\n", sig); - if (mmc_omap2()) - sig = host->id == 0 ? OMAP24XX_DMA_MMC1_RX : OMAP24XX_DMA_MMC2_RX; - else - sig = host->id == 0 ? OMAP_DMA_MMC_RX : OMAP_DMA_MMC2_RX; - host->dma_rx = dma_request_channel(mask, omap_dma_filter_fn, &sig); + + res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx"); + if (res) + sig = res->start; + host->dma_rx = dma_request_slave_channel_compat(mask, + omap_dma_filter_fn, &sig, &pdev->dev, "rx"); if (!host->dma_rx) dev_warn(host->dev, "unable to obtain RX DMA engine channel %u\n", sig); -- cgit v1.2.3 From 9cb238c00ba5c1ddfff2c2ed6aa66c15b962e4c3 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 26 Nov 2013 15:50:33 -0800 Subject: mmc: omap: Fix I2C dependency and make driver usable with device tree Some features can be configured by the companion I2C chips, which may not be available at the probe time. Fix the issue by returning -EPROBE_DEFER when the MMC controller slots are not configured. While at it, let's also add minimal device tree support so omap24xx platforms can use this driver without legacy mode since we claim to support device tree for mach-omap2 based systems. Although adding the minimal device tree support is not strictly a fix, it does remove one of the last blockers for dropping a bunch of legacy platform data for mach-omap2. Cc: linux-mmc@vger.kernel.org Acked-by: Chris Ball Signed-off-by: Tony Lindgren --- Documentation/devicetree/bindings/mmc/ti-omap.txt | 54 +++++++++++++++++++++++ drivers/mmc/host/omap.c | 11 ++++- 2 files changed, 64 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/mmc/ti-omap.txt diff --git a/Documentation/devicetree/bindings/mmc/ti-omap.txt b/Documentation/devicetree/bindings/mmc/ti-omap.txt new file mode 100644 index 000000000000..8de579969763 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/ti-omap.txt @@ -0,0 +1,54 @@ +* TI MMC host controller for OMAP1 and 2420 + +The MMC Host Controller on TI OMAP1 and 2420 family provides +an interface for MMC, SD, and SDIO types of memory cards. + +This file documents differences between the core properties described +by mmc.txt and the properties used by the omap mmc driver. + +Note that this driver will not work with omap2430 or later omaps, +please see the omap hsmmc driver for the current omaps. + +Required properties: +- compatible: Must be "ti,omap2420-mmc", for OMAP2420 controllers +- ti,hwmods: For 2420, must be "msdi", where n is controller + instance starting 1 + +Examples: + + msdi1: mmc@4809c000 { + compatible = "ti,omap2420-mmc"; + ti,hwmods = "msdi1"; + reg = <0x4809c000 0x80>; + interrupts = <83>; + dmas = <&sdma 61 &sdma 62>; + dma-names = "tx", "rx"; + }; + +* TI MMC host controller for OMAP1 and 2420 + +The MMC Host Controller on TI OMAP1 and 2420 family provides +an interface for MMC, SD, and SDIO types of memory cards. + +This file documents differences between the core properties described +by mmc.txt and the properties used by the omap mmc driver. + +Note that this driver will not work with omap2430 or later omaps, +please see the omap hsmmc driver for the current omaps. + +Required properties: +- compatible: Must be "ti,omap2420-mmc", for OMAP2420 controllers +- ti,hwmods: For 2420, must be "msdi", where n is controller + instance starting 1 + +Examples: + + msdi1: mmc@4809c000 { + compatible = "ti,omap2420-mmc"; + ti,hwmods = "msdi1"; + reg = <0x4809c000 0x80>; + interrupts = <83>; + dmas = <&sdma 61 &sdma 62>; + dma-names = "tx", "rx"; + }; + diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c index 22995873f554..98b6b6ef7e5c 100644 --- a/drivers/mmc/host/omap.c +++ b/drivers/mmc/host/omap.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include @@ -1329,7 +1330,7 @@ static int mmc_omap_probe(struct platform_device *pdev) } if (pdata->nr_slots == 0) { dev_err(&pdev->dev, "no slots\n"); - return -ENXIO; + return -EPROBE_DEFER; } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -1502,12 +1503,20 @@ static int mmc_omap_remove(struct platform_device *pdev) return 0; } +#if IS_BUILTIN(CONFIG_OF) +static const struct of_device_id mmc_omap_match[] = { + { .compatible = "ti,omap2420-mmc", }, + { }, +}; +#endif + static struct platform_driver mmc_omap_driver = { .probe = mmc_omap_probe, .remove = mmc_omap_remove, .driver = { .name = DRIVER_NAME, .owner = THIS_MODULE, + .of_match_table = of_match_ptr(mmc_omap_match), }, }; -- cgit v1.2.3 From ae5fbae0ccd982dfca0ce363036ed92f5b13f150 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 22 Oct 2013 18:35:19 -0700 Subject: [SCSI] libsas: fix usage of ata_tf_to_fis Since commit 110dd8f19df5 "[SCSI] libsas: fix scr_read/write users and update the libata documentation" we have been passing pmp=1 and is_cmd=0 to ata_tf_to_fis(). Praveen reports that eSATA attached drives do not discover correctly. His investigation found that the BIOS was passing pmp=0 while Linux was passing pmp=1 and failing to discover the drives. Update libsas to follow the libata example of pulling the pmp setting from the ata_link and correct is_cmd to be 1 since all tf's submitted through ->qc_issue are commands. Presumably libsas lldds do not care about is_cmd as they have sideband mechanisms to perform link management. http://marc.info/?l=linux-scsi&m=138179681726990 [jejb: checkpatch fix] Signed-off-by: Dan Williams Reported-by: Praveen Murali Tested-by: Praveen Murali Cc: stable@vger.kernel.org Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_ata.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c index 161c98efade9..d2895836f9fa 100644 --- a/drivers/scsi/libsas/sas_ata.c +++ b/drivers/scsi/libsas/sas_ata.c @@ -211,7 +211,7 @@ static unsigned int sas_ata_qc_issue(struct ata_queued_cmd *qc) qc->tf.nsect = 0; } - ata_tf_to_fis(&qc->tf, 1, 0, (u8*)&task->ata_task.fis); + ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, (u8 *)&task->ata_task.fis); task->uldd_task = qc; if (ata_is_atapi(qc->tf.protocol)) { memcpy(task->ata_task.atapi_packet, qc->cdb, qc->dev->cdb_len); -- cgit v1.2.3 From 32e475d76a3e40879cd9ee4f69b19615062280d7 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Thu, 21 Nov 2013 12:41:44 +0100 Subject: sched: Expose preempt_schedule_irq() Tony reported that aa0d53260596 ("ia64: Use preempt_schedule_irq") broke PREEMPT=n builds on ia64. Ok, wrapped my brain around it. I tripped over the magic asm foo which has a single need_resched check and schedule point for both sys call return and interrupt return. So you need the schedule_preempt_irq() for kernel preemption from interrupt return while on a normal syscall preemption a schedule would be sufficient. But using schedule_preempt_irq() is not harmful here in any way. It just sets the preempt_active bit also in cases where it would not be required. Even on preempt=n kernels adding the preempt_active bit is completely harmless. So instead of having an extra function, moving the existing one out of the ifdef PREEMPT looks like the sanest thing to do. It would also allow getting rid of various other sti/schedule/cli asm magic in other archs. Reported-and-Tested-by: Tony Luck Fixes: aa0d53260596 ("ia64: Use preempt_schedule_irq") Signed-off-by: Thomas Gleixner [slightly edited Changelog] Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1311211230030.30673@ionos.tec.linutronix.de Signed-off-by: Ingo Molnar --- kernel/sched/core.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/kernel/sched/core.c b/kernel/sched/core.c index 718730dd0480..e85cda20ab2b 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -2660,6 +2660,7 @@ asmlinkage void __sched notrace preempt_schedule(void) } while (need_resched()); } EXPORT_SYMBOL(preempt_schedule); +#endif /* CONFIG_PREEMPT */ /* * this is the entry point to schedule() from kernel preemption @@ -2693,8 +2694,6 @@ asmlinkage void __sched preempt_schedule_irq(void) exception_exit(prev_state); } -#endif /* CONFIG_PREEMPT */ - int default_wake_function(wait_queue_t *curr, unsigned mode, int wake_flags, void *key) { -- cgit v1.2.3 From 96739d6e548e16d76de39d059e1e39e70c187fff Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Wed, 20 Nov 2013 09:50:28 +0100 Subject: sched/doc: Fix generation of device-drivers Since commit 7a6354e241d8 ("sched: Move wait.c into kernel/sched/"), the path of this file has changed. Signed-off-by: Nicolas Dichtel Cc: jkosina@suse.cz Cc: akpm@linux-foundation.org Cc: linux-doc@vger.kernel.org Cc: rob@landley.net Cc: joe@perches.com Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/1384937428-15731-1-git-send-email-nicolas.dichtel@6wind.com Signed-off-by: Ingo Molnar --- Documentation/DocBook/device-drivers.tmpl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl index 6c9d9d37c83a..f5170082bdb3 100644 --- a/Documentation/DocBook/device-drivers.tmpl +++ b/Documentation/DocBook/device-drivers.tmpl @@ -58,7 +58,7 @@ Wait queues and Wake events !Iinclude/linux/wait.h -!Ekernel/wait.c +!Ekernel/sched/wait.c High-resolution timers !Iinclude/linux/ktime.h -- cgit v1.2.3 From c50325f7bcb8a3ceaacb9dbc41180b1cbbae7b5e Mon Sep 17 00:00:00 2001 From: "Chew, Chiau Ee" Date: Fri, 29 Nov 2013 02:13:11 +0800 Subject: spi/pxa2xx: Restore private register bits. The Intel LPSS SPI private register bits have to be restored when system resume from S3 suspend. Signed-off-by: Chew, Chiau Ee Acked-by: Mika Westerberg Signed-off-by: Mark Brown --- drivers/spi/spi-pxa2xx.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index 7028180a020a..7765b1999537 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -1293,6 +1293,9 @@ static int pxa2xx_spi_resume(struct device *dev) /* Enable the SSP clock */ clk_prepare_enable(ssp->clk); + /* Restore LPSS private register bits */ + lpss_ssp_setup(drv_data); + /* Start the queue running */ status = spi_master_resume(drv_data->master); if (status != 0) { -- cgit v1.2.3 From 22e580d07f6529a395c129575127ea6d860aed3a Mon Sep 17 00:00:00 2001 From: Bockholdt Arne Date: Tue, 26 Nov 2013 07:13:57 +0000 Subject: intel_idle: Fixed C6 state on Avoton/Rangeley processors Corrected the MWAIT flag for C-State C6 on Intel Avoton/Rangeley processors. Signed-off-by: Arne Bockholdt Acked-by: Len Brown Signed-off-by: Rafael J. Wysocki --- drivers/idle/intel_idle.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c index cbd4e9abc47e..92d1206482a6 100644 --- a/drivers/idle/intel_idle.c +++ b/drivers/idle/intel_idle.c @@ -329,7 +329,7 @@ static struct cpuidle_state atom_cstates[] __initdata = { { .enter = NULL } }; -static struct cpuidle_state avn_cstates[CPUIDLE_STATE_MAX] = { +static struct cpuidle_state avn_cstates[] __initdata = { { .name = "C1-AVN", .desc = "MWAIT 0x00", @@ -340,7 +340,7 @@ static struct cpuidle_state avn_cstates[CPUIDLE_STATE_MAX] = { { .name = "C6-AVN", .desc = "MWAIT 0x51", - .flags = MWAIT2flg(0x58) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED, + .flags = MWAIT2flg(0x51) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED, .exit_latency = 15, .target_residency = 45, .enter = &intel_idle }, -- cgit v1.2.3 From 5a87182aa21d6d5d306840feab9321818dd3e2a3 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 27 Nov 2013 09:09:42 +0530 Subject: cpufreq: suspend governors on system suspend/hibernate This patch adds cpufreq suspend/resume calls to dpm_{suspend|resume}_noirq() for handling suspend/resume of cpufreq governors. Lan Tianyu (Intel) & Jinhyuk Choi (Broadcom) found anr issue where tunables configuration for clusters/sockets with non-boot CPUs was getting lost after suspend/resume, as we were notifying governors with CPUFREQ_GOV_POLICY_EXIT on removal of the last cpu for that policy and so deallocating memory for tunables. This is fixed by this patch as we don't allow any operation on governors after device suspend and before device resume now. Reported-and-tested-by: Lan Tianyu Reported-by: Jinhyuk Choi Signed-off-by: Viresh Kumar [rjw: Changelog, minor cleanups] Signed-off-by: Rafael J. Wysocki --- drivers/base/power/main.c | 3 +++ drivers/cpufreq/cpufreq.c | 43 +++++++++++++++++++++++++++++++++++++++++++ include/linux/cpufreq.h | 8 ++++++++ 3 files changed, 54 insertions(+) diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index 9f098a82cf04..10c3510d72a9 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include "../base.h" #include "power.h" @@ -473,6 +474,7 @@ static void dpm_resume_noirq(pm_message_t state) dpm_show_time(starttime, state, "noirq"); resume_device_irqs(); cpuidle_resume(); + cpufreq_resume(); } /** @@ -885,6 +887,7 @@ static int dpm_suspend_noirq(pm_message_t state) ktime_t starttime = ktime_get(); int error = 0; + cpufreq_suspend(); cpuidle_pause(); suspend_device_irqs(); mutex_lock(&dpm_list_mtx); diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 02d534da22dd..606224a8abc2 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include #include @@ -47,6 +48,9 @@ static LIST_HEAD(cpufreq_policy_list); static DEFINE_PER_CPU(char[CPUFREQ_NAME_LEN], cpufreq_cpu_governor); #endif +/* Flag to suspend/resume CPUFreq governors */ +static bool cpufreq_suspended; + static inline bool has_target(void) { return cpufreq_driver->target_index || cpufreq_driver->target; @@ -1462,6 +1466,41 @@ static struct subsys_interface cpufreq_interface = { .remove_dev = cpufreq_remove_dev, }; +void cpufreq_suspend(void) +{ + struct cpufreq_policy *policy; + + if (!has_target()) + return; + + pr_debug("%s: Suspending Governors\n", __func__); + + list_for_each_entry(policy, &cpufreq_policy_list, policy_list) + if (__cpufreq_governor(policy, CPUFREQ_GOV_STOP)) + pr_err("%s: Failed to stop governor for policy: %p\n", + __func__, policy); + + cpufreq_suspended = true; +} + +void cpufreq_resume(void) +{ + struct cpufreq_policy *policy; + + if (!has_target()) + return; + + pr_debug("%s: Resuming Governors\n", __func__); + + cpufreq_suspended = false; + + list_for_each_entry(policy, &cpufreq_policy_list, policy_list) + if (__cpufreq_governor(policy, CPUFREQ_GOV_START) + || __cpufreq_governor(policy, CPUFREQ_GOV_LIMITS)) + pr_err("%s: Failed to start governor for policy: %p\n", + __func__, policy); +} + /** * cpufreq_bp_suspend - Prepare the boot CPU for system suspend. * @@ -1764,6 +1803,10 @@ static int __cpufreq_governor(struct cpufreq_policy *policy, struct cpufreq_governor *gov = NULL; #endif + /* Don't start any governor operations if we are entering suspend */ + if (cpufreq_suspended) + return 0; + if (policy->governor->max_transition_latency && policy->cpuinfo.transition_latency > policy->governor->max_transition_latency) { diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index 5bd6ab9b0c27..91716658e9a1 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -272,6 +272,14 @@ cpufreq_verify_within_cpu_limits(struct cpufreq_policy *policy) policy->cpuinfo.max_freq); } +#ifdef CONFIG_CPU_FREQ +void cpufreq_suspend(void); +void cpufreq_resume(void); +#else +static inline void cpufreq_suspend(void) {} +static inline void cpufreq_resume(void) {} +#endif + /********************************************************************* * CPUFREQ NOTIFIER INTERFACE * *********************************************************************/ -- cgit v1.2.3 From fc019c7122dfcd69c50142b57a735539aec5da95 Mon Sep 17 00:00:00 2001 From: Tom Lendacky Date: Tue, 12 Nov 2013 11:46:04 -0600 Subject: crypto: authenc - Find proper IV address in ablkcipher callback When performing an asynchronous ablkcipher operation the authenc completion callback routine is invoked, but it does not locate and use the proper IV. The callback routine, crypto_authenc_encrypt_done, is updated to use the same method of calculating the address of the IV as is done in crypto_authenc_encrypt function which sets up the callback. Cc: stable@vger.kernel.org Signed-off-by: Tom Lendacky Signed-off-by: Herbert Xu --- crypto/authenc.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/crypto/authenc.c b/crypto/authenc.c index 1875e7026e8f..e1223559d5df 100644 --- a/crypto/authenc.c +++ b/crypto/authenc.c @@ -380,9 +380,10 @@ static void crypto_authenc_encrypt_done(struct crypto_async_request *req, if (!err) { struct crypto_aead *authenc = crypto_aead_reqtfm(areq); struct crypto_authenc_ctx *ctx = crypto_aead_ctx(authenc); - struct ablkcipher_request *abreq = aead_request_ctx(areq); - u8 *iv = (u8 *)(abreq + 1) + - crypto_ablkcipher_reqsize(ctx->enc); + struct authenc_request_ctx *areq_ctx = aead_request_ctx(areq); + struct ablkcipher_request *abreq = (void *)(areq_ctx->tail + + ctx->reqoff); + u8 *iv = (u8 *)abreq - crypto_ablkcipher_ivsize(ctx->enc); err = crypto_authenc_genicv(areq, iv, 0); } -- cgit v1.2.3 From 41da8b5adba77e22584f8b45f9641504fa885308 Mon Sep 17 00:00:00 2001 From: Tom Lendacky Date: Tue, 12 Nov 2013 11:46:10 -0600 Subject: crypto: scatterwalk - Set the chain pointer indication bit The scatterwalk_crypto_chain function invokes the scatterwalk_sg_chain function to chain two scatterlists, but the chain pointer indication bit is not set. When the resulting scatterlist is used, for example, by sg_nents to count the number of scatterlist entries, a segfault occurs because sg_nents does not follow the chain pointer to the chained scatterlist. Update scatterwalk_sg_chain to set the chain pointer indication bit as is done by the sg_chain function. Cc: stable@vger.kernel.org Signed-off-by: Tom Lendacky Signed-off-by: Herbert Xu --- include/crypto/scatterwalk.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/crypto/scatterwalk.h b/include/crypto/scatterwalk.h index 13621cc8cf4c..64ebede184f1 100644 --- a/include/crypto/scatterwalk.h +++ b/include/crypto/scatterwalk.h @@ -36,6 +36,7 @@ static inline void scatterwalk_sg_chain(struct scatterlist *sg1, int num, { sg_set_page(&sg1[num - 1], (void *)sg2, 0, 0); sg1[num - 1].page_link &= ~0x02; + sg1[num - 1].page_link |= 0x01; } static inline struct scatterlist *scatterwalk_sg_next(struct scatterlist *sg) -- cgit v1.2.3 From 935e99a3afda0a58c2eada0ff7c613d3844d738c Mon Sep 17 00:00:00 2001 From: Horia Geanta Date: Tue, 19 Nov 2013 14:57:49 +0200 Subject: crypto: talitos - corrrectly handle zero-length assoc data talitos does not handle well zero-length assoc data. From dmesg: talitos ffe30000.crypto: master data transfer error talitos ffe30000.crypto: gather return/length error Check whether assoc data is provided by inspecting assoclen, not assoc pointer. This is needed in order to pass testmgr tests. Signed-off-by: Horia Geanta Signed-off-by: Herbert Xu --- drivers/crypto/talitos.c | 21 ++++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-) diff --git a/drivers/crypto/talitos.c b/drivers/crypto/talitos.c index 905de4427e7c..81ab42cd14b2 100644 --- a/drivers/crypto/talitos.c +++ b/drivers/crypto/talitos.c @@ -790,7 +790,7 @@ static void ipsec_esp_unmap(struct device *dev, if (edesc->assoc_chained) talitos_unmap_sg_chain(dev, areq->assoc, DMA_TO_DEVICE); - else + else if (areq->assoclen) /* assoc_nents counts also for IV in non-contiguous cases */ dma_unmap_sg(dev, areq->assoc, edesc->assoc_nents ? edesc->assoc_nents - 1 : 1, @@ -973,7 +973,11 @@ static int ipsec_esp(struct talitos_edesc *edesc, struct aead_request *areq, dma_sync_single_for_device(dev, edesc->dma_link_tbl, edesc->dma_len, DMA_BIDIRECTIONAL); } else { - to_talitos_ptr(&desc->ptr[1], sg_dma_address(areq->assoc)); + if (areq->assoclen) + to_talitos_ptr(&desc->ptr[1], + sg_dma_address(areq->assoc)); + else + to_talitos_ptr(&desc->ptr[1], edesc->iv_dma); desc->ptr[1].j_extent = 0; } @@ -1122,10 +1126,10 @@ static struct talitos_edesc *talitos_edesc_alloc(struct device *dev, return ERR_PTR(-EINVAL); } - if (iv) + if (ivsize) iv_dma = dma_map_single(dev, iv, ivsize, DMA_TO_DEVICE); - if (assoc) { + if (assoclen) { /* * Currently it is assumed that iv is provided whenever assoc * is. @@ -1173,9 +1177,16 @@ static struct talitos_edesc *talitos_edesc_alloc(struct device *dev, edesc = kmalloc(alloc_len, GFP_DMA | flags); if (!edesc) { - talitos_unmap_sg_chain(dev, assoc, DMA_TO_DEVICE); + if (assoc_chained) + talitos_unmap_sg_chain(dev, assoc, DMA_TO_DEVICE); + else if (assoclen) + dma_unmap_sg(dev, assoc, + assoc_nents ? assoc_nents - 1 : 1, + DMA_TO_DEVICE); + if (iv_dma) dma_unmap_single(dev, iv_dma, ivsize, DMA_TO_DEVICE); + dev_err(dev, "could not allocate edescriptor\n"); return ERR_PTR(-ENOMEM); } -- cgit v1.2.3 From 9dda2769af4f3f3093434648c409bb351120d9e8 Mon Sep 17 00:00:00 2001 From: Gerald Schaefer Date: Tue, 19 Nov 2013 17:12:47 +0100 Subject: crypto: s390 - Fix aes-xts parameter corruption Some s390 crypto algorithms incorrectly use the crypto_tfm structure to store private data. As the tfm can be shared among multiple threads, this can result in data corruption. This patch fixes aes-xts by moving the xts and pcc parameter blocks from the tfm onto the stack (48 + 96 bytes). Cc: stable@vger.kernel.org Signed-off-by: Gerald Schaefer Signed-off-by: Herbert Xu --- arch/s390/crypto/aes_s390.c | 31 +++++++++++++++++-------------- 1 file changed, 17 insertions(+), 14 deletions(-) diff --git a/arch/s390/crypto/aes_s390.c b/arch/s390/crypto/aes_s390.c index 4363528dc8fd..b3feabd39f31 100644 --- a/arch/s390/crypto/aes_s390.c +++ b/arch/s390/crypto/aes_s390.c @@ -55,8 +55,7 @@ struct pcc_param { struct s390_xts_ctx { u8 key[32]; - u8 xts_param[16]; - struct pcc_param pcc; + u8 pcc_key[32]; long enc; long dec; int key_len; @@ -591,7 +590,7 @@ static int xts_aes_set_key(struct crypto_tfm *tfm, const u8 *in_key, xts_ctx->enc = KM_XTS_128_ENCRYPT; xts_ctx->dec = KM_XTS_128_DECRYPT; memcpy(xts_ctx->key + 16, in_key, 16); - memcpy(xts_ctx->pcc.key + 16, in_key + 16, 16); + memcpy(xts_ctx->pcc_key + 16, in_key + 16, 16); break; case 48: xts_ctx->enc = 0; @@ -602,7 +601,7 @@ static int xts_aes_set_key(struct crypto_tfm *tfm, const u8 *in_key, xts_ctx->enc = KM_XTS_256_ENCRYPT; xts_ctx->dec = KM_XTS_256_DECRYPT; memcpy(xts_ctx->key, in_key, 32); - memcpy(xts_ctx->pcc.key, in_key + 32, 32); + memcpy(xts_ctx->pcc_key, in_key + 32, 32); break; default: *flags |= CRYPTO_TFM_RES_BAD_KEY_LEN; @@ -621,29 +620,33 @@ static int xts_aes_crypt(struct blkcipher_desc *desc, long func, unsigned int nbytes = walk->nbytes; unsigned int n; u8 *in, *out; - void *param; + struct pcc_param pcc_param; + struct { + u8 key[32]; + u8 init[16]; + } xts_param; if (!nbytes) goto out; - memset(xts_ctx->pcc.block, 0, sizeof(xts_ctx->pcc.block)); - memset(xts_ctx->pcc.bit, 0, sizeof(xts_ctx->pcc.bit)); - memset(xts_ctx->pcc.xts, 0, sizeof(xts_ctx->pcc.xts)); - memcpy(xts_ctx->pcc.tweak, walk->iv, sizeof(xts_ctx->pcc.tweak)); - param = xts_ctx->pcc.key + offset; - ret = crypt_s390_pcc(func, param); + memset(pcc_param.block, 0, sizeof(pcc_param.block)); + memset(pcc_param.bit, 0, sizeof(pcc_param.bit)); + memset(pcc_param.xts, 0, sizeof(pcc_param.xts)); + memcpy(pcc_param.tweak, walk->iv, sizeof(pcc_param.tweak)); + memcpy(pcc_param.key, xts_ctx->pcc_key, 32); + ret = crypt_s390_pcc(func, &pcc_param.key[offset]); if (ret < 0) return -EIO; - memcpy(xts_ctx->xts_param, xts_ctx->pcc.xts, 16); - param = xts_ctx->key + offset; + memcpy(xts_param.key, xts_ctx->key, 32); + memcpy(xts_param.init, pcc_param.xts, 16); do { /* only use complete blocks */ n = nbytes & ~(AES_BLOCK_SIZE - 1); out = walk->dst.virt.addr; in = walk->src.virt.addr; - ret = crypt_s390_km(func, param, out, in, n); + ret = crypt_s390_km(func, &xts_param.key[offset], out, in, n); if (ret < 0 || ret != n) return -EIO; -- cgit v1.2.3 From 5638cabf3e4883f38dfb246c30980cebf694fbda Mon Sep 17 00:00:00 2001 From: Horia Geanta Date: Thu, 28 Nov 2013 15:11:15 +0200 Subject: crypto: ccm - Fix handling of zero plaintext when computing mac There are cases when cryptlen can be zero in crypto_ccm_auth(): -encryptiom: input scatterlist length is zero (no plaintext) -decryption: input scatterlist contains only the mac plus the condition of having different source and destination buffers (or else scatterlist length = max(plaintext_len, ciphertext_len)). These are not handled correctly, leading to crashes like: root@p4080ds:~/crypto# insmod tcrypt.ko mode=45 ------------[ cut here ]------------ kernel BUG at crypto/scatterwalk.c:37! Oops: Exception in kernel mode, sig: 5 [#1] SMP NR_CPUS=8 P4080 DS Modules linked in: tcrypt(+) crc32c xts xcbc vmac pcbc ecb gcm ghash_generic gf128mul ccm ctr seqiv CPU: 3 PID: 1082 Comm: cryptomgr_test Not tainted 3.11.0 #14 task: ee12c5b0 ti: eecd0000 task.ti: eecd0000 NIP: c0204d98 LR: f9225848 CTR: c0204d80 REGS: eecd1b70 TRAP: 0700 Not tainted (3.11.0) MSR: 00029002 CR: 22044022 XER: 20000000 GPR00: f9225c94 eecd1c20 ee12c5b0 eecd1c28 ee879400 ee879400 00000000 ee607464 GPR08: 00000001 00000001 00000000 006b0000 c0204d80 00000000 00000002 c0698e20 GPR16: ee987000 ee895000 fffffff4 ee879500 00000100 eecd1d58 00000001 00000000 GPR24: ee879400 00000020 00000000 00000000 ee5b2800 ee607430 00000004 ee607460 NIP [c0204d98] scatterwalk_start+0x18/0x30 LR [f9225848] get_data_to_compute+0x28/0x2f0 [ccm] Call Trace: [eecd1c20] [f9225974] get_data_to_compute+0x154/0x2f0 [ccm] (unreliable) [eecd1c70] [f9225c94] crypto_ccm_auth+0x184/0x1d0 [ccm] [eecd1cb0] [f9225d40] crypto_ccm_encrypt+0x60/0x2d0 [ccm] [eecd1cf0] [c020d77c] __test_aead+0x3ec/0xe20 [eecd1e20] [c020f35c] test_aead+0x6c/0xe0 [eecd1e40] [c020f420] alg_test_aead+0x50/0xd0 [eecd1e60] [c020e5e4] alg_test+0x114/0x2e0 [eecd1ee0] [c020bd1c] cryptomgr_test+0x4c/0x60 [eecd1ef0] [c0047058] kthread+0xa8/0xb0 [eecd1f40] [c000eb0c] ret_from_kernel_thread+0x5c/0x64 Instruction dump: 0f080000 81290024 552807fe 0f080000 5529003a 4bffffb4 90830000 39400000 39000001 8124000c 2f890000 7d28579e <0f090000> 81240008 91230004 4e800020 ---[ end trace 6d652dfcd1be37bd ]--- Cc: Cc: Jussi Kivilinna Signed-off-by: Horia Geanta Signed-off-by: Herbert Xu --- crypto/ccm.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/crypto/ccm.c b/crypto/ccm.c index 3e05499d183a..1df84217f7c9 100644 --- a/crypto/ccm.c +++ b/crypto/ccm.c @@ -271,7 +271,8 @@ static int crypto_ccm_auth(struct aead_request *req, struct scatterlist *plain, } /* compute plaintext into mac */ - get_data_to_compute(cipher, pctx, plain, cryptlen); + if (cryptlen) + get_data_to_compute(cipher, pctx, plain, cryptlen); out: return err; -- cgit v1.2.3 From bbf9c8934ba2bfd5fd809562f945deaf5a565898 Mon Sep 17 00:00:00 2001 From: Horia Geanta Date: Thu, 28 Nov 2013 15:11:16 +0200 Subject: crypto: caam - fix aead sglen for case 'dst != src' For aead case when source and destination buffers are different, there is an incorrect assumption that the source length includes the ICV length. Fix this, since it leads to an oops when using sg_count() to find the number of nents in the scatterlist: Unable to handle kernel paging request for data at address 0x00000004 Faulting instruction address: 0xf91f7634 Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=8 P4080 DS Modules linked in: caamalg(+) caam_jr caam CPU: 1 PID: 1053 Comm: cryptomgr_test Not tainted 3.11.0 #16 task: eeb24ab0 ti: eeafa000 task.ti: eeafa000 NIP: f91f7634 LR: f91f7f24 CTR: f91f7ef0 REGS: eeafbbc0 TRAP: 0300 Not tainted (3.11.0) MSR: 00029002 CR: 44044044 XER: 00000000 DEAR: 00000004, ESR: 00000000 GPR00: f91f7f24 eeafbc70 eeb24ab0 00000002 ee8e0900 ee8e0800 00000024 c45c4462 GPR08: 00000010 00000000 00000014 0c0e4000 24044044 00000000 00000000 c0691590 GPR16: eeab0000 eeb23000 00000000 00000000 00000000 00000001 00000001 eeafbcc8 GPR24: 000000d1 00000010 ee2d5000 ee49ea10 ee49ea10 ee46f640 ee46f640 c0691590 NIP [f91f7634] aead_edesc_alloc.constprop.14+0x144/0x780 [caamalg] LR [f91f7f24] aead_encrypt+0x34/0x288 [caamalg] Call Trace: [eeafbc70] [a1004000] 0xa1004000 (unreliable) [eeafbcc0] [f91f7f24] aead_encrypt+0x34/0x288 [caamalg] [eeafbcf0] [c020d77c] __test_aead+0x3ec/0xe20 [eeafbe20] [c020f35c] test_aead+0x6c/0xe0 [eeafbe40] [c020f420] alg_test_aead+0x50/0xd0 [eeafbe60] [c020e5e4] alg_test+0x114/0x2e0 [eeafbee0] [c020bd1c] cryptomgr_test+0x4c/0x60 [eeafbef0] [c0047058] kthread+0xa8/0xb0 [eeafbf40] [c000eb0c] ret_from_kernel_thread+0x5c/0x64 Instruction dump: 69084321 7d080034 5508d97e 69080001 0f080000 81290024 552807fe 0f080000 3a600001 5529003a 2f8a0000 40dd0028 <80e90004> 3ab50001 8109000c 70e30002 ---[ end trace b3c3e23925c7484e ]--- While here, add a tcrypt mode for making it easy to test authenc (needed for triggering case above). Signed-off-by: Horia Geanta Signed-off-by: Herbert Xu --- crypto/tcrypt.c | 4 ++++ drivers/crypto/caam/caamalg.c | 51 ++++++++++++++++++++++++------------------- 2 files changed, 33 insertions(+), 22 deletions(-) diff --git a/crypto/tcrypt.c b/crypto/tcrypt.c index 1ab8258fcf56..001f07cdb828 100644 --- a/crypto/tcrypt.c +++ b/crypto/tcrypt.c @@ -1242,6 +1242,10 @@ static int do_test(int m) ret += tcrypt_test("cmac(des3_ede)"); break; + case 155: + ret += tcrypt_test("authenc(hmac(sha1),cbc(aes))"); + break; + case 200: test_cipher_speed("ecb(aes)", ENCRYPT, sec, NULL, 0, speed_template_16_24_32); diff --git a/drivers/crypto/caam/caamalg.c b/drivers/crypto/caam/caamalg.c index 4f44b71b9e24..4cf5dec826e1 100644 --- a/drivers/crypto/caam/caamalg.c +++ b/drivers/crypto/caam/caamalg.c @@ -818,7 +818,7 @@ static void aead_decrypt_done(struct device *jrdev, u32 *desc, u32 err, ivsize, 1); print_hex_dump(KERN_ERR, "dst @"__stringify(__LINE__)": ", DUMP_PREFIX_ADDRESS, 16, 4, sg_virt(req->dst), - req->cryptlen, 1); + req->cryptlen - ctx->authsize, 1); #endif if (err) { @@ -972,12 +972,9 @@ static void init_aead_job(u32 *sh_desc, dma_addr_t ptr, (edesc->src_nents ? : 1); in_options = LDST_SGF; } - if (encrypt) - append_seq_in_ptr(desc, src_dma, req->assoclen + ivsize + - req->cryptlen - authsize, in_options); - else - append_seq_in_ptr(desc, src_dma, req->assoclen + ivsize + - req->cryptlen, in_options); + + append_seq_in_ptr(desc, src_dma, req->assoclen + ivsize + req->cryptlen, + in_options); if (likely(req->src == req->dst)) { if (all_contig) { @@ -998,7 +995,8 @@ static void init_aead_job(u32 *sh_desc, dma_addr_t ptr, } } if (encrypt) - append_seq_out_ptr(desc, dst_dma, req->cryptlen, out_options); + append_seq_out_ptr(desc, dst_dma, req->cryptlen + authsize, + out_options); else append_seq_out_ptr(desc, dst_dma, req->cryptlen - authsize, out_options); @@ -1048,8 +1046,8 @@ static void init_aead_giv_job(u32 *sh_desc, dma_addr_t ptr, sec4_sg_index += edesc->assoc_nents + 1 + edesc->src_nents; in_options = LDST_SGF; } - append_seq_in_ptr(desc, src_dma, req->assoclen + ivsize + - req->cryptlen - authsize, in_options); + append_seq_in_ptr(desc, src_dma, req->assoclen + ivsize + req->cryptlen, + in_options); if (contig & GIV_DST_CONTIG) { dst_dma = edesc->iv_dma; @@ -1066,7 +1064,8 @@ static void init_aead_giv_job(u32 *sh_desc, dma_addr_t ptr, } } - append_seq_out_ptr(desc, dst_dma, ivsize + req->cryptlen, out_options); + append_seq_out_ptr(desc, dst_dma, ivsize + req->cryptlen + authsize, + out_options); } /* @@ -1130,7 +1129,8 @@ static void init_ablkcipher_job(u32 *sh_desc, dma_addr_t ptr, * allocate and map the aead extended descriptor */ static struct aead_edesc *aead_edesc_alloc(struct aead_request *req, - int desc_bytes, bool *all_contig_ptr) + int desc_bytes, bool *all_contig_ptr, + bool encrypt) { struct crypto_aead *aead = crypto_aead_reqtfm(req); struct caam_ctx *ctx = crypto_aead_ctx(aead); @@ -1145,12 +1145,22 @@ static struct aead_edesc *aead_edesc_alloc(struct aead_request *req, bool assoc_chained = false, src_chained = false, dst_chained = false; int ivsize = crypto_aead_ivsize(aead); int sec4_sg_index, sec4_sg_len = 0, sec4_sg_bytes; + unsigned int authsize = ctx->authsize; assoc_nents = sg_count(req->assoc, req->assoclen, &assoc_chained); - src_nents = sg_count(req->src, req->cryptlen, &src_chained); - if (unlikely(req->dst != req->src)) - dst_nents = sg_count(req->dst, req->cryptlen, &dst_chained); + if (unlikely(req->dst != req->src)) { + src_nents = sg_count(req->src, req->cryptlen, &src_chained); + dst_nents = sg_count(req->dst, + req->cryptlen + + (encrypt ? authsize : (-authsize)), + &dst_chained); + } else { + src_nents = sg_count(req->src, + req->cryptlen + + (encrypt ? authsize : 0), + &src_chained); + } sgc = dma_map_sg_chained(jrdev, req->assoc, assoc_nents ? : 1, DMA_TO_DEVICE, assoc_chained); @@ -1234,11 +1244,9 @@ static int aead_encrypt(struct aead_request *req) u32 *desc; int ret = 0; - req->cryptlen += ctx->authsize; - /* allocate extended descriptor */ edesc = aead_edesc_alloc(req, DESC_JOB_IO_LEN * - CAAM_CMD_SZ, &all_contig); + CAAM_CMD_SZ, &all_contig, true); if (IS_ERR(edesc)) return PTR_ERR(edesc); @@ -1275,7 +1283,7 @@ static int aead_decrypt(struct aead_request *req) /* allocate extended descriptor */ edesc = aead_edesc_alloc(req, DESC_JOB_IO_LEN * - CAAM_CMD_SZ, &all_contig); + CAAM_CMD_SZ, &all_contig, false); if (IS_ERR(edesc)) return PTR_ERR(edesc); @@ -1332,7 +1340,8 @@ static struct aead_edesc *aead_giv_edesc_alloc(struct aead_givcrypt_request src_nents = sg_count(req->src, req->cryptlen, &src_chained); if (unlikely(req->dst != req->src)) - dst_nents = sg_count(req->dst, req->cryptlen, &dst_chained); + dst_nents = sg_count(req->dst, req->cryptlen + ctx->authsize, + &dst_chained); sgc = dma_map_sg_chained(jrdev, req->assoc, assoc_nents ? : 1, DMA_TO_DEVICE, assoc_chained); @@ -1426,8 +1435,6 @@ static int aead_givencrypt(struct aead_givcrypt_request *areq) u32 *desc; int ret = 0; - req->cryptlen += ctx->authsize; - /* allocate extended descriptor */ edesc = aead_giv_edesc_alloc(areq, DESC_JOB_IO_LEN * CAAM_CMD_SZ, &contig); -- cgit v1.2.3 From 62293a37de0138b2e9c965f0a3b803c0f40a6581 Mon Sep 17 00:00:00 2001 From: Horia Geanta Date: Thu, 28 Nov 2013 15:11:17 +0200 Subject: crypto: talitos - fix aead sglen for case 'dst != src' For aead case when source and destination buffers are different, there is an incorrect assumption that the source length includes the ICV length. Fix this, since it leads to an oops when using sg_count() to find the number of nents in the scatterlist: Unable to handle kernel paging request for data at address 0x00000004 Faulting instruction address: 0xf2265a28 Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=8 P2020 RDB Modules linked in: talitos(+) CPU: 1 PID: 2187 Comm: cryptomgr_test Not tainted 3.11.0 #12 task: c4e72e20 ti: ef634000 task.ti: ef634000 NIP: f2265a28 LR: f2266ad8 CTR: c000c900 REGS: ef635bb0 TRAP: 0300 Not tainted (3.11.0) MSR: 00029000 CR: 42042084 XER: 00000000 DEAR: 00000004, ESR: 00000000 GPR00: f2266e10 ef635c60 c4e72e20 00000001 00000014 ef635c69 00000001 c11f3082 GPR08: 00000010 00000000 00000002 2f635d58 22044084 00000000 00000000 c0755c80 GPR16: c4bf1000 ef784000 00000000 00000000 00000020 00000014 00000010 ef2f6100 GPR24: ef2f6200 00000024 ef143210 ef2f6000 00000000 ef635d58 00000000 2f635d58 NIP [f2265a28] sg_count+0x1c/0xb4 [talitos] LR [f2266ad8] talitos_edesc_alloc+0x12c/0x410 [talitos] Call Trace: [ef635c60] [c0552068] schedule_timeout+0x148/0x1ac (unreliable) [ef635cc0] [f2266e10] aead_edesc_alloc+0x54/0x64 [talitos] [ef635ce0] [f22680f0] aead_encrypt+0x24/0x70 [talitos] [ef635cf0] [c024b948] __test_aead+0x494/0xf68 [ef635e20] [c024d54c] test_aead+0x64/0xcc [ef635e40] [c024d604] alg_test_aead+0x50/0xc4 [ef635e60] [c024c838] alg_test+0x10c/0x2e4 [ef635ee0] [c0249d1c] cryptomgr_test+0x4c/0x54 [ef635ef0] [c005d598] kthread+0xa8/0xac [ef635f40] [c000e3bc] ret_from_kernel_thread+0x5c/0x64 Instruction dump: 81230024 552807fe 0f080000 5523003a 4bffff24 39000000 2c040000 99050000 408100a0 7c691b78 38c00001 38600000 <80e90004> 38630001 8109000c 70ea0002 ---[ end trace 4498123cd8478591 ]--- Signed-off-by: Horia Geanta Signed-off-by: Herbert Xu --- drivers/crypto/talitos.c | 47 +++++++++++++++++++++++------------------------ 1 file changed, 23 insertions(+), 24 deletions(-) diff --git a/drivers/crypto/talitos.c b/drivers/crypto/talitos.c index 81ab42cd14b2..b44f4ddc565c 100644 --- a/drivers/crypto/talitos.c +++ b/drivers/crypto/talitos.c @@ -1112,7 +1112,8 @@ static struct talitos_edesc *talitos_edesc_alloc(struct device *dev, unsigned int authsize, unsigned int ivsize, int icv_stashing, - u32 cryptoflags) + u32 cryptoflags, + bool encrypt) { struct talitos_edesc *edesc; int assoc_nents = 0, src_nents, dst_nents, alloc_len, dma_len; @@ -1145,19 +1146,17 @@ static struct talitos_edesc *talitos_edesc_alloc(struct device *dev, assoc_nents = assoc_nents ? assoc_nents + 1 : 2; } - src_nents = sg_count(src, cryptlen + authsize, &src_chained); - src_nents = (src_nents == 1) ? 0 : src_nents; - - if (!dst) { - dst_nents = 0; - } else { - if (dst == src) { - dst_nents = src_nents; - } else { - dst_nents = sg_count(dst, cryptlen + authsize, - &dst_chained); - dst_nents = (dst_nents == 1) ? 0 : dst_nents; - } + if (!dst || dst == src) { + src_nents = sg_count(src, cryptlen + authsize, &src_chained); + src_nents = (src_nents == 1) ? 0 : src_nents; + dst_nents = dst ? src_nents : 0; + } else { /* dst && dst != src*/ + src_nents = sg_count(src, cryptlen + (encrypt ? 0 : authsize), + &src_chained); + src_nents = (src_nents == 1) ? 0 : src_nents; + dst_nents = sg_count(dst, cryptlen + (encrypt ? authsize : 0), + &dst_chained); + dst_nents = (dst_nents == 1) ? 0 : dst_nents; } /* @@ -1208,7 +1207,7 @@ static struct talitos_edesc *talitos_edesc_alloc(struct device *dev, } static struct talitos_edesc *aead_edesc_alloc(struct aead_request *areq, u8 *iv, - int icv_stashing) + int icv_stashing, bool encrypt) { struct crypto_aead *authenc = crypto_aead_reqtfm(areq); struct talitos_ctx *ctx = crypto_aead_ctx(authenc); @@ -1217,7 +1216,7 @@ static struct talitos_edesc *aead_edesc_alloc(struct aead_request *areq, u8 *iv, return talitos_edesc_alloc(ctx->dev, areq->assoc, areq->src, areq->dst, iv, areq->assoclen, areq->cryptlen, ctx->authsize, ivsize, icv_stashing, - areq->base.flags); + areq->base.flags, encrypt); } static int aead_encrypt(struct aead_request *req) @@ -1227,7 +1226,7 @@ static int aead_encrypt(struct aead_request *req) struct talitos_edesc *edesc; /* allocate extended descriptor */ - edesc = aead_edesc_alloc(req, req->iv, 0); + edesc = aead_edesc_alloc(req, req->iv, 0, true); if (IS_ERR(edesc)) return PTR_ERR(edesc); @@ -1250,7 +1249,7 @@ static int aead_decrypt(struct aead_request *req) req->cryptlen -= authsize; /* allocate extended descriptor */ - edesc = aead_edesc_alloc(req, req->iv, 1); + edesc = aead_edesc_alloc(req, req->iv, 1, false); if (IS_ERR(edesc)) return PTR_ERR(edesc); @@ -1296,7 +1295,7 @@ static int aead_givencrypt(struct aead_givcrypt_request *req) struct talitos_edesc *edesc; /* allocate extended descriptor */ - edesc = aead_edesc_alloc(areq, req->giv, 0); + edesc = aead_edesc_alloc(areq, req->giv, 0, true); if (IS_ERR(edesc)) return PTR_ERR(edesc); @@ -1452,7 +1451,7 @@ static int common_nonsnoop(struct talitos_edesc *edesc, } static struct talitos_edesc *ablkcipher_edesc_alloc(struct ablkcipher_request * - areq) + areq, bool encrypt) { struct crypto_ablkcipher *cipher = crypto_ablkcipher_reqtfm(areq); struct talitos_ctx *ctx = crypto_ablkcipher_ctx(cipher); @@ -1460,7 +1459,7 @@ static struct talitos_edesc *ablkcipher_edesc_alloc(struct ablkcipher_request * return talitos_edesc_alloc(ctx->dev, NULL, areq->src, areq->dst, areq->info, 0, areq->nbytes, 0, ivsize, 0, - areq->base.flags); + areq->base.flags, encrypt); } static int ablkcipher_encrypt(struct ablkcipher_request *areq) @@ -1470,7 +1469,7 @@ static int ablkcipher_encrypt(struct ablkcipher_request *areq) struct talitos_edesc *edesc; /* allocate extended descriptor */ - edesc = ablkcipher_edesc_alloc(areq); + edesc = ablkcipher_edesc_alloc(areq, true); if (IS_ERR(edesc)) return PTR_ERR(edesc); @@ -1487,7 +1486,7 @@ static int ablkcipher_decrypt(struct ablkcipher_request *areq) struct talitos_edesc *edesc; /* allocate extended descriptor */ - edesc = ablkcipher_edesc_alloc(areq); + edesc = ablkcipher_edesc_alloc(areq, false); if (IS_ERR(edesc)) return PTR_ERR(edesc); @@ -1639,7 +1638,7 @@ static struct talitos_edesc *ahash_edesc_alloc(struct ahash_request *areq, struct talitos_ahash_req_ctx *req_ctx = ahash_request_ctx(areq); return talitos_edesc_alloc(ctx->dev, NULL, req_ctx->psrc, NULL, NULL, 0, - nbytes, 0, 0, 0, areq->base.flags); + nbytes, 0, 0, 0, areq->base.flags, false); } static int ahash_init(struct ahash_request *areq) -- cgit v1.2.3 From 8ec25c51291681bd68bdc290b35f2e61fa601c21 Mon Sep 17 00:00:00 2001 From: Horia Geanta Date: Thu, 28 Nov 2013 15:11:18 +0200 Subject: crypto: testmgr - fix sglen in test_aead for case 'dst != src' Commit d8a32ac25698cd60b02bed2100379803c7f964e3 (crypto: testmgr - make test_aead also test 'dst != src' code paths) added support for different source and destination buffers in test_aead. This patch modifies the source and destination buffer lengths accordingly: the lengths are not equal since encryption / decryption adds / removes the ICV. Cc: Jussi Kivilinna Signed-off-by: Horia Geanta Signed-off-by: Herbert Xu --- crypto/testmgr.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/crypto/testmgr.c b/crypto/testmgr.c index 432afc03e7c3..77955507f6f1 100644 --- a/crypto/testmgr.c +++ b/crypto/testmgr.c @@ -503,16 +503,16 @@ static int __test_aead(struct crypto_aead *tfm, int enc, goto out; } - sg_init_one(&sg[0], input, - template[i].ilen + (enc ? authsize : 0)); - if (diff_dst) { output = xoutbuf[0]; output += align_offset; + sg_init_one(&sg[0], input, template[i].ilen); sg_init_one(&sgout[0], output, + template[i].rlen); + } else { + sg_init_one(&sg[0], input, template[i].ilen + (enc ? authsize : 0)); - } else { output = input; } @@ -612,12 +612,6 @@ static int __test_aead(struct crypto_aead *tfm, int enc, memcpy(q, template[i].input + temp, template[i].tap[k]); - n = template[i].tap[k]; - if (k == template[i].np - 1 && enc) - n += authsize; - if (offset_in_page(q) + n < PAGE_SIZE) - q[n] = 0; - sg_set_buf(&sg[k], q, template[i].tap[k]); if (diff_dst) { @@ -625,13 +619,17 @@ static int __test_aead(struct crypto_aead *tfm, int enc, offset_in_page(IDX[k]); memset(q, 0, template[i].tap[k]); - if (offset_in_page(q) + n < PAGE_SIZE) - q[n] = 0; sg_set_buf(&sgout[k], q, template[i].tap[k]); } + n = template[i].tap[k]; + if (k == template[i].np - 1 && enc) + n += authsize; + if (offset_in_page(q) + n < PAGE_SIZE) + q[n] = 0; + temp += template[i].tap[k]; } @@ -650,10 +648,10 @@ static int __test_aead(struct crypto_aead *tfm, int enc, goto out; } - sg[k - 1].length += authsize; - if (diff_dst) sgout[k - 1].length += authsize; + else + sg[k - 1].length += authsize; } sg_init_table(asg, template[i].anp); -- cgit v1.2.3 From 08332dff8adebb74171e98e008d6c20de6658c42 Mon Sep 17 00:00:00 2001 From: Mark Rutland Date: Thu, 28 Nov 2013 14:21:40 +0000 Subject: irqchip: Gic: fix boot for chained gics As of c0114709ed: "irqchip: gic: Perform the gic_secondary_init() call via CPU notifier", booting on a platform with chained gics (e.g. Realview EB ARM11MPCore) will result in the gic_cpu_notifier being registered twice, corrupting the cpu notifier list and rendering the platform unbootable. This patch ensures that we only register the notifier for the first gic, allowing platforms with chained gics to boot. At the same time we limit the pointlessly duplicated calls to set_smp_cross_call and set_handle_irq to the first gic registered. Signed-off-by: Mark Rutland Reviewed-by: Catalin Marinas Cc: linux-arm-kernel@lists.infradead.org Cc: marc.zyngier@arm.com Cc: rob.herring@calxeda.com Cc: olof@lixom.net Link: http://lkml.kernel.org/r/1385648500-29048-1-git-send-email-mark.rutland@arm.com Signed-off-by: Thomas Gleixner --- drivers/irqchip/irq-gic.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c index d0e948084eaf..e219a5bf0cac 100644 --- a/drivers/irqchip/irq-gic.c +++ b/drivers/irqchip/irq-gic.c @@ -814,12 +814,13 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start, if (WARN_ON(!gic->domain)) return; + if (gic_nr == 0) { #ifdef CONFIG_SMP - set_smp_cross_call(gic_raise_softirq); - register_cpu_notifier(&gic_cpu_notifier); + set_smp_cross_call(gic_raise_softirq); + register_cpu_notifier(&gic_cpu_notifier); #endif - - set_handle_irq(gic_handle_irq); + set_handle_irq(gic_handle_irq); + } gic_chip.flags |= gic_arch_extn.flags; gic_dist_init(gic); -- cgit v1.2.3 From e0d59733f6b1796b8d6692642c87d7dd862c3e3a Mon Sep 17 00:00:00 2001 From: Seiji Aguchi Date: Wed, 30 Oct 2013 15:27:26 -0400 Subject: efivars, efi-pstore: Hold off deletion of sysfs entry until the scan is completed Currently, when mounting pstore file system, a read callback of efi_pstore driver runs mutiple times as below. - In the first read callback, scan efivar_sysfs_list from head and pass a kmsg buffer of a entry to an upper pstore layer. - In the second read callback, rescan efivar_sysfs_list from the entry and pass another kmsg buffer to it. - Repeat the scan and pass until the end of efivar_sysfs_list. In this process, an entry is read across the multiple read function calls. To avoid race between the read and erasion, the whole process above is protected by a spinlock, holding in open() and releasing in close(). At the same time, kmemdup() is called to pass the buffer to pstore filesystem during it. And then, it causes a following lockdep warning. To make the dynamic memory allocation runnable without taking spinlock, holding off a deletion of sysfs entry if it happens while scanning it via efi_pstore, and deleting it after the scan is completed. To implement it, this patch introduces two flags, scanning and deleting, to efivar_entry. On the code basis, it seems that all the scanning and deleting logic is not needed because __efivars->lock are not dropped when reading from the EFI variable store. But, the scanning and deleting logic is still needed because an efi-pstore and a pstore filesystem works as follows. In case an entry(A) is found, the pointer is saved to psi->data. And efi_pstore_read() passes the entry(A) to a pstore filesystem by releasing __efivars->lock. And then, the pstore filesystem calls efi_pstore_read() again and the same entry(A), which is saved to psi->data, is used for resuming to scan a sysfs-list. So, to protect the entry(A), the logic is needed. [ 1.143710] ------------[ cut here ]------------ [ 1.144058] WARNING: CPU: 1 PID: 1 at kernel/lockdep.c:2740 lockdep_trace_alloc+0x104/0x110() [ 1.144058] DEBUG_LOCKS_WARN_ON(irqs_disabled_flags(flags)) [ 1.144058] Modules linked in: [ 1.144058] CPU: 1 PID: 1 Comm: systemd Not tainted 3.11.0-rc5 #2 [ 1.144058] 0000000000000009 ffff8800797e9ae0 ffffffff816614a5 ffff8800797e9b28 [ 1.144058] ffff8800797e9b18 ffffffff8105510d 0000000000000080 0000000000000046 [ 1.144058] 00000000000000d0 00000000000003af ffffffff81ccd0c0 ffff8800797e9b78 [ 1.144058] Call Trace: [ 1.144058] [] dump_stack+0x54/0x74 [ 1.144058] [] warn_slowpath_common+0x7d/0xa0 [ 1.144058] [] warn_slowpath_fmt+0x4c/0x50 [ 1.144058] [] ? vsscanf+0x57f/0x7b0 [ 1.144058] [] lockdep_trace_alloc+0x104/0x110 [ 1.144058] [] __kmalloc_track_caller+0x50/0x280 [ 1.144058] [] ? efi_pstore_read_func.part.1+0x12b/0x170 [ 1.144058] [] kmemdup+0x20/0x50 [ 1.144058] [] efi_pstore_read_func.part.1+0x12b/0x170 [ 1.144058] [] ? efi_pstore_read_func.part.1+0x170/0x170 [ 1.144058] [] efi_pstore_read_func+0xb4/0xe0 [ 1.144058] [] __efivar_entry_iter+0xfb/0x120 [ 1.144058] [] efi_pstore_read+0x3f/0x50 [ 1.144058] [] pstore_get_records+0x9a/0x150 [ 1.158207] [] ? selinux_d_instantiate+0x1c/0x20 [ 1.158207] [] ? parse_options+0x80/0x80 [ 1.158207] [] pstore_fill_super+0xa5/0xc0 [ 1.158207] [] mount_single+0xa2/0xd0 [ 1.158207] [] pstore_mount+0x18/0x20 [ 1.158207] [] mount_fs+0x39/0x1b0 [ 1.158207] [] ? __alloc_percpu+0x10/0x20 [ 1.158207] [] vfs_kern_mount+0x63/0xf0 [ 1.158207] [] do_mount+0x23e/0xa20 [ 1.158207] [] ? strndup_user+0x4b/0xf0 [ 1.158207] [] SyS_mount+0x83/0xc0 [ 1.158207] [] system_call_fastpath+0x16/0x1b [ 1.158207] ---[ end trace 61981bc62de9f6f4 ]--- Signed-off-by: Seiji Aguchi Tested-by: Madper Xie Cc: stable@kernel.org Signed-off-by: Matt Fleming --- drivers/firmware/efi/efi-pstore.c | 143 +++++++++++++++++++++++++++++++++++--- drivers/firmware/efi/efivars.c | 12 ++-- drivers/firmware/efi/vars.c | 12 +++- include/linux/efi.h | 4 ++ 4 files changed, 155 insertions(+), 16 deletions(-) diff --git a/drivers/firmware/efi/efi-pstore.c b/drivers/firmware/efi/efi-pstore.c index 5002d50e3781..6ce31e93da55 100644 --- a/drivers/firmware/efi/efi-pstore.c +++ b/drivers/firmware/efi/efi-pstore.c @@ -18,14 +18,12 @@ module_param_named(pstore_disable, efivars_pstore_disable, bool, 0644); static int efi_pstore_open(struct pstore_info *psi) { - efivar_entry_iter_begin(); psi->data = NULL; return 0; } static int efi_pstore_close(struct pstore_info *psi) { - efivar_entry_iter_end(); psi->data = NULL; return 0; } @@ -91,19 +89,125 @@ static int efi_pstore_read_func(struct efivar_entry *entry, void *data) __efivar_entry_get(entry, &entry->var.Attributes, &entry->var.DataSize, entry->var.Data); size = entry->var.DataSize; + memcpy(*cb_data->buf, entry->var.Data, + (size_t)min_t(unsigned long, EFIVARS_DATA_SIZE_MAX, size)); - *cb_data->buf = kmemdup(entry->var.Data, size, GFP_KERNEL); - if (*cb_data->buf == NULL) - return -ENOMEM; return size; } +/** + * efi_pstore_scan_sysfs_enter + * @entry: scanning entry + * @next: next entry + * @head: list head + */ +static void efi_pstore_scan_sysfs_enter(struct efivar_entry *pos, + struct efivar_entry *next, + struct list_head *head) +{ + pos->scanning = true; + if (&next->list != head) + next->scanning = true; +} + +/** + * __efi_pstore_scan_sysfs_exit + * @entry: deleting entry + * @turn_off_scanning: Check if a scanning flag should be turned off + */ +static inline void __efi_pstore_scan_sysfs_exit(struct efivar_entry *entry, + bool turn_off_scanning) +{ + if (entry->deleting) { + list_del(&entry->list); + efivar_entry_iter_end(); + efivar_unregister(entry); + efivar_entry_iter_begin(); + } else if (turn_off_scanning) + entry->scanning = false; +} + +/** + * efi_pstore_scan_sysfs_exit + * @pos: scanning entry + * @next: next entry + * @head: list head + * @stop: a flag checking if scanning will stop + */ +static void efi_pstore_scan_sysfs_exit(struct efivar_entry *pos, + struct efivar_entry *next, + struct list_head *head, bool stop) +{ + __efi_pstore_scan_sysfs_exit(pos, true); + if (stop) + __efi_pstore_scan_sysfs_exit(next, &next->list != head); +} + +/** + * efi_pstore_sysfs_entry_iter + * + * @data: function-specific data to pass to callback + * @pos: entry to begin iterating from + * + * You MUST call efivar_enter_iter_begin() before this function, and + * efivar_entry_iter_end() afterwards. + * + * It is possible to begin iteration from an arbitrary entry within + * the list by passing @pos. @pos is updated on return to point to + * the next entry of the last one passed to efi_pstore_read_func(). + * To begin iterating from the beginning of the list @pos must be %NULL. + */ +static int efi_pstore_sysfs_entry_iter(void *data, struct efivar_entry **pos) +{ + struct efivar_entry *entry, *n; + struct list_head *head = &efivar_sysfs_list; + int size = 0; + + if (!*pos) { + list_for_each_entry_safe(entry, n, head, list) { + efi_pstore_scan_sysfs_enter(entry, n, head); + + size = efi_pstore_read_func(entry, data); + efi_pstore_scan_sysfs_exit(entry, n, head, size < 0); + if (size) + break; + } + *pos = n; + return size; + } + + list_for_each_entry_safe_from((*pos), n, head, list) { + efi_pstore_scan_sysfs_enter((*pos), n, head); + + size = efi_pstore_read_func((*pos), data); + efi_pstore_scan_sysfs_exit((*pos), n, head, size < 0); + if (size) + break; + } + *pos = n; + return size; +} + +/** + * efi_pstore_read + * + * This function returns a size of NVRAM entry logged via efi_pstore_write(). + * The meaning and behavior of efi_pstore/pstore are as below. + * + * size > 0: Got data of an entry logged via efi_pstore_write() successfully, + * and pstore filesystem will continue reading subsequent entries. + * size == 0: Entry was not logged via efi_pstore_write(), + * and efi_pstore driver will continue reading subsequent entries. + * size < 0: Failed to get data of entry logging via efi_pstore_write(), + * and pstore will stop reading entry. + */ static ssize_t efi_pstore_read(u64 *id, enum pstore_type_id *type, int *count, struct timespec *timespec, char **buf, bool *compressed, struct pstore_info *psi) { struct pstore_read_data data; + ssize_t size; data.id = id; data.type = type; @@ -112,8 +216,17 @@ static ssize_t efi_pstore_read(u64 *id, enum pstore_type_id *type, data.compressed = compressed; data.buf = buf; - return __efivar_entry_iter(efi_pstore_read_func, &efivar_sysfs_list, &data, - (struct efivar_entry **)&psi->data); + *data.buf = kzalloc(EFIVARS_DATA_SIZE_MAX, GFP_KERNEL); + if (!*data.buf) + return -ENOMEM; + + efivar_entry_iter_begin(); + size = efi_pstore_sysfs_entry_iter(&data, + (struct efivar_entry **)&psi->data); + efivar_entry_iter_end(); + if (size <= 0) + kfree(*data.buf); + return size; } static int efi_pstore_write(enum pstore_type_id type, @@ -184,9 +297,17 @@ static int efi_pstore_erase_func(struct efivar_entry *entry, void *data) return 0; } + if (entry->scanning) { + /* + * Skip deletion because this entry will be deleted + * after scanning is completed. + */ + entry->deleting = true; + } else + list_del(&entry->list); + /* found */ __efivar_entry_delete(entry); - list_del(&entry->list); return 1; } @@ -214,10 +335,12 @@ static int efi_pstore_erase(enum pstore_type_id type, u64 id, int count, efivar_entry_iter_begin(); found = __efivar_entry_iter(efi_pstore_erase_func, &efivar_sysfs_list, &edata, &entry); - efivar_entry_iter_end(); - if (found) + if (found && !entry->scanning) { + efivar_entry_iter_end(); efivar_unregister(entry); + } else + efivar_entry_iter_end(); return 0; } diff --git a/drivers/firmware/efi/efivars.c b/drivers/firmware/efi/efivars.c index 933eb027d527..3dc248239197 100644 --- a/drivers/firmware/efi/efivars.c +++ b/drivers/firmware/efi/efivars.c @@ -383,12 +383,16 @@ static ssize_t efivar_delete(struct file *filp, struct kobject *kobj, else if (__efivar_entry_delete(entry)) err = -EIO; - efivar_entry_iter_end(); - - if (err) + if (err) { + efivar_entry_iter_end(); return err; + } - efivar_unregister(entry); + if (!entry->scanning) { + efivar_entry_iter_end(); + efivar_unregister(entry); + } else + efivar_entry_iter_end(); /* It's dead Jim.... */ return count; diff --git a/drivers/firmware/efi/vars.c b/drivers/firmware/efi/vars.c index 391c67b182d9..b22659cccca4 100644 --- a/drivers/firmware/efi/vars.c +++ b/drivers/firmware/efi/vars.c @@ -683,8 +683,16 @@ struct efivar_entry *efivar_entry_find(efi_char16_t *name, efi_guid_t guid, if (!found) return NULL; - if (remove) - list_del(&entry->list); + if (remove) { + if (entry->scanning) { + /* + * The entry will be deleted + * after scanning is completed. + */ + entry->deleting = true; + } else + list_del(&entry->list); + } return entry; } diff --git a/include/linux/efi.h b/include/linux/efi.h index bc5687d0f315..11ce6784a196 100644 --- a/include/linux/efi.h +++ b/include/linux/efi.h @@ -801,6 +801,8 @@ struct efivar_entry { struct efi_variable var; struct list_head list; struct kobject kobj; + bool scanning; + bool deleting; }; @@ -866,6 +868,8 @@ void efivar_run_worker(void); #if defined(CONFIG_EFI_VARS) || defined(CONFIG_EFI_VARS_MODULE) int efivars_sysfs_init(void); +#define EFIVARS_DATA_SIZE_MAX 1024 + #endif /* CONFIG_EFI_VARS */ #endif /* _LINUX_EFI_H */ -- cgit v1.2.3 From 1f3a8bae21a22808f242ccfb22aca37a635e261e Mon Sep 17 00:00:00 2001 From: Matt Fleming Date: Mon, 11 Nov 2013 16:18:59 +0000 Subject: x86/efi: Fix earlyprintk off-by-one bug Dave reported seeing the following incorrect output on his Thinkpad T420 when using earlyprintk=efi, [ 0.000000] efi: EFI v2.00 by Lenovo ACPI=0xdabfe000 ACPI 2.0=0xdabfe014 SMBIOS=0xdaa9e000 The output should be on one line, not split over two. The cause is an off-by-one error when checking that the efi_y coordinate hasn't been incremented out of bounds. Reported-by: Dave Young Signed-off-by: Matt Fleming --- arch/x86/platform/efi/early_printk.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/platform/efi/early_printk.c b/arch/x86/platform/efi/early_printk.c index 6599a0027b76..81b506d5befd 100644 --- a/arch/x86/platform/efi/early_printk.c +++ b/arch/x86/platform/efi/early_printk.c @@ -142,7 +142,7 @@ early_efi_write(struct console *con, const char *str, unsigned int num) efi_y += font->height; } - if (efi_y + font->height >= si->lfb_height) { + if (efi_y + font->height > si->lfb_height) { u32 i; efi_y -= font->height; -- cgit v1.2.3 From 31e20bad8d5871c6f8673c28ea26ab7a0e520086 Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Thu, 28 Nov 2013 18:31:05 +0100 Subject: diag: warn about missing first netlink attribute The first netlink attribute (value 0) must always be defined as none/unspec. This is correctly done in inet_diag.h, but other diag interfaces are wrong. Because we cannot change an existing API, I add a comment to point the mistake and avoid to propagate it in a new diag API in the future. CC: Thomas Graf Signed-off-by: Nicolas Dichtel Acked-by: Thomas Graf Signed-off-by: David S. Miller --- include/uapi/linux/netlink_diag.h | 1 + include/uapi/linux/packet_diag.h | 1 + include/uapi/linux/unix_diag.h | 1 + 3 files changed, 3 insertions(+) diff --git a/include/uapi/linux/netlink_diag.h b/include/uapi/linux/netlink_diag.h index 4e31db4eea41..f2159d30d1f5 100644 --- a/include/uapi/linux/netlink_diag.h +++ b/include/uapi/linux/netlink_diag.h @@ -33,6 +33,7 @@ struct netlink_diag_ring { }; enum { + /* NETLINK_DIAG_NONE, standard nl API requires this attribute! */ NETLINK_DIAG_MEMINFO, NETLINK_DIAG_GROUPS, NETLINK_DIAG_RX_RING, diff --git a/include/uapi/linux/packet_diag.h b/include/uapi/linux/packet_diag.h index b2cc0cd9c4d9..d08c63f3dd6f 100644 --- a/include/uapi/linux/packet_diag.h +++ b/include/uapi/linux/packet_diag.h @@ -29,6 +29,7 @@ struct packet_diag_msg { }; enum { + /* PACKET_DIAG_NONE, standard nl API requires this attribute! */ PACKET_DIAG_INFO, PACKET_DIAG_MCLIST, PACKET_DIAG_RX_RING, diff --git a/include/uapi/linux/unix_diag.h b/include/uapi/linux/unix_diag.h index b9e2a6a7446f..1eb0b8dd1830 100644 --- a/include/uapi/linux/unix_diag.h +++ b/include/uapi/linux/unix_diag.h @@ -31,6 +31,7 @@ struct unix_diag_msg { }; enum { + /* UNIX_DIAG_NONE, standard nl API requires this attribute! */ UNIX_DIAG_NAME, UNIX_DIAG_VFS, UNIX_DIAG_PEER, -- cgit v1.2.3 From fe9d04afe9bee0ec37a9724937443b2c0e39ce4b Mon Sep 17 00:00:00 2001 From: dingtianhong Date: Fri, 22 Nov 2013 22:28:43 +0800 Subject: bonding: disable arp and enable mii monitoring when bond change to no uses arp mode Because the ARP monitoring is not support for 802.3ad, but I still could change the mode to 802.3ad from ab mode while ARP monitoring is running, it is incorrect. So add a check for 802.3ad in bonding_store_mode to fix the problem, and make a new macro BOND_NO_USES_ARP() to simplify the code. v2: according to the Dan Williams's suggestion, bond mode is the most important bond option, it should override any of the other sub-options. So when the mode is changed, the conficting values should be cleared or reset, otherwise the user has to duplicate more operations to modify the logic. I disable the arp and enable mii monitoring when the bond mode is changed to AB, TB and 8023AD if the arp interval is true. v3: according to the Nik's suggestion, the default value of miimon should need a name, there is several place to use it, and the bond_store_arp_interval() could use micro BOND_NO_USES_ARP to make the code more simpify. Suggested-by: Dan Williams Suggested-by: Nikolay Aleksandrov Signed-off-by: Ding Tianhong Reviewed-by: Nikolay Aleksandrov Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 4 ++-- drivers/net/bonding/bond_options.c | 13 +++++++++---- drivers/net/bonding/bond_sysfs.c | 4 +--- drivers/net/bonding/bonding.h | 7 +++++++ 4 files changed, 19 insertions(+), 9 deletions(-) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 4dd5ee2a34cc..36eab0c4fb33 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -4110,7 +4110,7 @@ static int bond_check_params(struct bond_params *params) if (!miimon) { pr_warning("Warning: miimon must be specified, otherwise bonding will not detect link failure, speed and duplex which are essential for 802.3ad operation\n"); pr_warning("Forcing miimon to 100msec\n"); - miimon = 100; + miimon = BOND_DEFAULT_MIIMON; } } @@ -4147,7 +4147,7 @@ static int bond_check_params(struct bond_params *params) if (!miimon) { pr_warning("Warning: miimon must be specified, otherwise bonding will not detect link failure and link speed which are essential for TLB/ALB load balancing\n"); pr_warning("Forcing miimon to 100msec\n"); - miimon = 100; + miimon = BOND_DEFAULT_MIIMON; } } diff --git a/drivers/net/bonding/bond_options.c b/drivers/net/bonding/bond_options.c index 9a5223c7b4d1..ea6f640782b7 100644 --- a/drivers/net/bonding/bond_options.c +++ b/drivers/net/bonding/bond_options.c @@ -45,10 +45,15 @@ int bond_option_mode_set(struct bonding *bond, int mode) return -EPERM; } - if (BOND_MODE_IS_LB(mode) && bond->params.arp_interval) { - pr_err("%s: %s mode is incompatible with arp monitoring.\n", - bond->dev->name, bond_mode_tbl[mode].modename); - return -EINVAL; + if (BOND_NO_USES_ARP(mode) && bond->params.arp_interval) { + pr_info("%s: %s mode is incompatible with arp monitoring, start mii monitoring\n", + bond->dev->name, bond_mode_tbl[mode].modename); + /* disable arp monitoring */ + bond->params.arp_interval = 0; + /* set miimon to default value */ + bond->params.miimon = BOND_DEFAULT_MIIMON; + pr_info("%s: Setting MII monitoring interval to %d.\n", + bond->dev->name, bond->params.miimon); } /* don't cache arp_validate between modes */ diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c index 0ec2a7e8c8a9..abf5e106edc5 100644 --- a/drivers/net/bonding/bond_sysfs.c +++ b/drivers/net/bonding/bond_sysfs.c @@ -523,9 +523,7 @@ static ssize_t bonding_store_arp_interval(struct device *d, ret = -EINVAL; goto out; } - if (bond->params.mode == BOND_MODE_ALB || - bond->params.mode == BOND_MODE_TLB || - bond->params.mode == BOND_MODE_8023AD) { + if (BOND_NO_USES_ARP(bond->params.mode)) { pr_info("%s: ARP monitoring cannot be used with ALB/TLB/802.3ad. Only MII monitoring is supported on %s.\n", bond->dev->name, bond->dev->name); ret = -EINVAL; diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h index ca31286aa028..a9f4f9f4d8ce 100644 --- a/drivers/net/bonding/bonding.h +++ b/drivers/net/bonding/bonding.h @@ -35,6 +35,8 @@ #define BOND_MAX_ARP_TARGETS 16 +#define BOND_DEFAULT_MIIMON 100 + #define IS_UP(dev) \ ((((dev)->flags & IFF_UP) == IFF_UP) && \ netif_running(dev) && \ @@ -55,6 +57,11 @@ ((mode) == BOND_MODE_TLB) || \ ((mode) == BOND_MODE_ALB)) +#define BOND_NO_USES_ARP(mode) \ + (((mode) == BOND_MODE_8023AD) || \ + ((mode) == BOND_MODE_TLB) || \ + ((mode) == BOND_MODE_ALB)) + #define TX_QUEUE_OVERRIDE(mode) \ (((mode) == BOND_MODE_ACTIVEBACKUP) || \ ((mode) == BOND_MODE_ROUNDROBIN)) -- cgit v1.2.3 From a2f4dfba9e736ebe339d560cb92678280b1eb5db Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Fri, 22 Nov 2013 22:07:57 -0800 Subject: tg3: Convert to use hwmon_device_register_with_groups Use new hwmon API to simplify code, provide missing mandatory 'name' sysfs attribute, and attach hwmon attributes to hwmon device instead of pci device. Signed-off-by: Guenter Roeck Reviewed-by: Jean Delvare Acked-by: Nithin Nayak Sujir Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 25 ++++++------------------- 1 file changed, 6 insertions(+), 19 deletions(-) diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index a9e068423ba0..369b736dde05 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -10629,10 +10629,8 @@ static void tg3_sd_scan_scratchpad(struct tg3 *tp, struct tg3_ocir *ocir) static ssize_t tg3_show_temp(struct device *dev, struct device_attribute *devattr, char *buf) { - struct pci_dev *pdev = to_pci_dev(dev); - struct net_device *netdev = pci_get_drvdata(pdev); - struct tg3 *tp = netdev_priv(netdev); struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct tg3 *tp = dev_get_drvdata(dev); u32 temperature; spin_lock_bh(&tp->lock); @@ -10650,29 +10648,25 @@ static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO, tg3_show_temp, NULL, static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, tg3_show_temp, NULL, TG3_TEMP_MAX_OFFSET); -static struct attribute *tg3_attributes[] = { +static struct attribute *tg3_attrs[] = { &sensor_dev_attr_temp1_input.dev_attr.attr, &sensor_dev_attr_temp1_crit.dev_attr.attr, &sensor_dev_attr_temp1_max.dev_attr.attr, NULL }; - -static const struct attribute_group tg3_group = { - .attrs = tg3_attributes, -}; +ATTRIBUTE_GROUPS(tg3); static void tg3_hwmon_close(struct tg3 *tp) { if (tp->hwmon_dev) { hwmon_device_unregister(tp->hwmon_dev); tp->hwmon_dev = NULL; - sysfs_remove_group(&tp->pdev->dev.kobj, &tg3_group); } } static void tg3_hwmon_open(struct tg3 *tp) { - int i, err; + int i; u32 size = 0; struct pci_dev *pdev = tp->pdev; struct tg3_ocir ocirs[TG3_SD_NUM_RECS]; @@ -10690,18 +10684,11 @@ static void tg3_hwmon_open(struct tg3 *tp) if (!size) return; - /* Register hwmon sysfs hooks */ - err = sysfs_create_group(&pdev->dev.kobj, &tg3_group); - if (err) { - dev_err(&pdev->dev, "Cannot create sysfs group, aborting\n"); - return; - } - - tp->hwmon_dev = hwmon_device_register(&pdev->dev); + tp->hwmon_dev = hwmon_device_register_with_groups(&pdev->dev, "tg3", + tp, tg3_groups); if (IS_ERR(tp->hwmon_dev)) { tp->hwmon_dev = NULL; dev_err(&pdev->dev, "Cannot register hwmon device, aborting\n"); - sysfs_remove_group(&pdev->dev.kobj, &tg3_group); } } -- cgit v1.2.3 From 0f0e2159c0c101426b705d70f43b9f423d51c869 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sat, 23 Nov 2013 13:01:50 +0100 Subject: genetlink: Fix uninitialized variable in genl_validate_assign_mc_groups() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit net/netlink/genetlink.c: In function ‘genl_validate_assign_mc_groups’: net/netlink/genetlink.c:217: warning: ‘err’ may be used uninitialized in this function Commit 2a94fe48f32ccf7321450a2cc07f2b724a444e5b ("genetlink: make multicast groups const, prevent abuse") split genl_register_mc_group() in multiple functions, but dropped the initialization of err. Initialize err to zero to fix this. Signed-off-by: Geert Uytterhoeven Signed-off-by: David S. Miller --- net/netlink/genetlink.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netlink/genetlink.c b/net/netlink/genetlink.c index 4518a57aa5fe..803206e82450 100644 --- a/net/netlink/genetlink.c +++ b/net/netlink/genetlink.c @@ -214,7 +214,7 @@ static int genl_validate_assign_mc_groups(struct genl_family *family) { int first_id; int n_groups = family->n_mcgrps; - int err, i; + int err = 0, i; bool groups_allocated = false; if (!n_groups) -- cgit v1.2.3 From 5e53e689b737526308db2b5c9f56e9d0371a1676 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sun, 24 Nov 2013 21:09:26 +0100 Subject: genetlink/pmcraid: use proper genetlink multicast API The pmcraid driver is abusing the genetlink API and is using its family ID as the multicast group ID, which is invalid and may belong to somebody else (and likely will.) Make it use the correct API, but since this may already be used as-is by userspace, reserve a family ID for this code and also reserve that group ID to not break userspace assumptions. My previous patch broke event delivery in the driver as I missed that it wasn't using the right API and forgot to update it later in my series. While changing this, I noticed that the genetlink code could use the static group ID instead of a strcmp(), so also do that for the VFS_DQUOT family. Cc: Anil Ravindranath Cc: "James E.J. Bottomley" Signed-off-by: Johannes Berg Signed-off-by: David S. Miller --- drivers/scsi/pmcraid.c | 20 +++++++++++++++----- include/uapi/linux/genetlink.h | 1 + net/netlink/genetlink.c | 11 +++++++++-- 3 files changed, 25 insertions(+), 7 deletions(-) diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c index bd6f743d87a7..892ea6161376 100644 --- a/drivers/scsi/pmcraid.c +++ b/drivers/scsi/pmcraid.c @@ -1404,11 +1404,22 @@ enum { }; #define PMCRAID_AEN_CMD_MAX (__PMCRAID_AEN_CMD_MAX - 1) +static struct genl_multicast_group pmcraid_mcgrps[] = { + { .name = "events", /* not really used - see ID discussion below */ }, +}; + static struct genl_family pmcraid_event_family = { - .id = GENL_ID_GENERATE, + /* + * Due to prior multicast group abuse (the code having assumed that + * the family ID can be used as a multicast group ID) we need to + * statically allocate a family (and thus group) ID. + */ + .id = GENL_ID_PMCRAID, .name = "pmcraid", .version = 1, - .maxattr = PMCRAID_AEN_ATTR_MAX + .maxattr = PMCRAID_AEN_ATTR_MAX, + .mcgrps = pmcraid_mcgrps, + .n_mcgrps = ARRAY_SIZE(pmcraid_mcgrps), }; /** @@ -1511,9 +1522,8 @@ static int pmcraid_notify_aen( return result; } - result = - genlmsg_multicast(&pmcraid_event_family, skb, 0, - pmcraid_event_family.id, GFP_ATOMIC); + result = genlmsg_multicast(&pmcraid_event_family, skb, + 0, 0, GFP_ATOMIC); /* If there are no listeners, genlmsg_multicast may return non-zero * value. diff --git a/include/uapi/linux/genetlink.h b/include/uapi/linux/genetlink.h index 1af72d8228e0..c3363ba1ae05 100644 --- a/include/uapi/linux/genetlink.h +++ b/include/uapi/linux/genetlink.h @@ -28,6 +28,7 @@ struct genlmsghdr { #define GENL_ID_GENERATE 0 #define GENL_ID_CTRL NLMSG_MIN_TYPE #define GENL_ID_VFS_DQUOT (NLMSG_MIN_TYPE + 1) +#define GENL_ID_PMCRAID (NLMSG_MIN_TYPE + 2) /************************************************************************** * Controller diff --git a/net/netlink/genetlink.c b/net/netlink/genetlink.c index 803206e82450..713671ae45af 100644 --- a/net/netlink/genetlink.c +++ b/net/netlink/genetlink.c @@ -74,9 +74,12 @@ static struct list_head family_ht[GENL_FAM_TAB_SIZE]; * Bit 17 is marked as already used since the VFS quota code * also abused this API and relied on family == group ID, we * cater to that by giving it a static family and group ID. + * Bit 18 is marked as already used since the PMCRAID driver + * did the same thing as the VFS quota code (maybe copied?) */ static unsigned long mc_group_start = 0x3 | BIT(GENL_ID_CTRL) | - BIT(GENL_ID_VFS_DQUOT); + BIT(GENL_ID_VFS_DQUOT) | + BIT(GENL_ID_PMCRAID); static unsigned long *mc_groups = &mc_group_start; static unsigned long mc_groups_longs = 1; @@ -139,6 +142,7 @@ static u16 genl_generate_id(void) for (i = 0; i <= GENL_MAX_ID - GENL_MIN_ID; i++) { if (id_gen_idx != GENL_ID_VFS_DQUOT && + id_gen_idx != GENL_ID_PMCRAID && !genl_family_find_byid(id_gen_idx)) return id_gen_idx; if (++id_gen_idx > GENL_MAX_ID) @@ -236,9 +240,12 @@ static int genl_validate_assign_mc_groups(struct genl_family *family) } else if (strcmp(family->name, "NET_DM") == 0) { first_id = 1; BUG_ON(n_groups != 1); - } else if (strcmp(family->name, "VFS_DQUOT") == 0) { + } else if (family->id == GENL_ID_VFS_DQUOT) { first_id = GENL_ID_VFS_DQUOT; BUG_ON(n_groups != 1); + } else if (family->id == GENL_ID_PMCRAID) { + first_id = GENL_ID_PMCRAID; + BUG_ON(n_groups != 1); } else { groups_allocated = true; err = genl_allocate_reserve_groups(n_groups, &first_id); -- cgit v1.2.3 From 6eabca54d6781f61c7318517c1463a098acb7a87 Mon Sep 17 00:00:00 2001 From: Xufeng Zhang Date: Mon, 25 Nov 2013 11:26:57 +0800 Subject: sctp: Restore 'resent' bit to avoid retransmitted chunks for RTT measurements Currently retransmitted DATA chunks could also be used for RTT measurements since there are no flag to identify whether the transmitted DATA chunk is a new one or a retransmitted one. This problem is introduced by commit ae19c5486 ("sctp: remove 'resent' bit from the chunk") which inappropriately removed the 'resent' bit completely, instead of doing this, we should set the resent bit only for the retransmitted DATA chunks. Signed-off-by: Xufeng Zhang Acked-by: Vlad Yasevich Signed-off-by: David S. Miller --- include/net/sctp/structs.h | 1 + net/sctp/output.c | 3 ++- net/sctp/outqueue.c | 3 +++ 3 files changed, 6 insertions(+), 1 deletion(-) diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h index 2174d8da0770..ea0ca5f6e629 100644 --- a/include/net/sctp/structs.h +++ b/include/net/sctp/structs.h @@ -629,6 +629,7 @@ struct sctp_chunk { #define SCTP_NEED_FRTX 0x1 #define SCTP_DONT_FRTX 0x2 __u16 rtt_in_progress:1, /* This chunk used for RTT calc? */ + resent:1, /* Has this chunk ever been resent. */ has_tsn:1, /* Does this chunk have a TSN yet? */ has_ssn:1, /* Does this chunk have a SSN yet? */ singleton:1, /* Only chunk in the packet? */ diff --git a/net/sctp/output.c b/net/sctp/output.c index e650978daf27..0e2644d0a773 100644 --- a/net/sctp/output.c +++ b/net/sctp/output.c @@ -474,10 +474,11 @@ int sctp_packet_transmit(struct sctp_packet *packet) * for a given destination transport address. */ - if (!tp->rto_pending) { + if (!chunk->resent && !tp->rto_pending) { chunk->rtt_in_progress = 1; tp->rto_pending = 1; } + has_data = 1; } diff --git a/net/sctp/outqueue.c b/net/sctp/outqueue.c index abb6db008df1..f51ba985a36e 100644 --- a/net/sctp/outqueue.c +++ b/net/sctp/outqueue.c @@ -446,6 +446,8 @@ void sctp_retransmit_mark(struct sctp_outq *q, transport->rto_pending = 0; } + chunk->resent = 1; + /* Move the chunk to the retransmit queue. The chunks * on the retransmit queue are always kept in order. */ @@ -1375,6 +1377,7 @@ static void sctp_check_transmitted(struct sctp_outq *q, * instance). */ if (!tchunk->tsn_gap_acked && + !tchunk->resent && tchunk->rtt_in_progress) { tchunk->rtt_in_progress = 0; rtt = jiffies - tchunk->sent_at; -- cgit v1.2.3 From 167f76a87743dfaf1fec954db5233715ddad49ef Mon Sep 17 00:00:00 2001 From: Shaohui Xie Date: Mon, 25 Nov 2013 12:40:49 +0800 Subject: phy: Add Vitesse 8514 phy ID Phy is compatible with Vitesse 82xx Signed-off-by: Shaohui Xie Signed-off-by: David S. Miller --- drivers/net/phy/vitesse.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c index 508e4359338b..14372c65a7e8 100644 --- a/drivers/net/phy/vitesse.c +++ b/drivers/net/phy/vitesse.c @@ -64,6 +64,7 @@ #define PHY_ID_VSC8234 0x000fc620 #define PHY_ID_VSC8244 0x000fc6c0 +#define PHY_ID_VSC8514 0x00070670 #define PHY_ID_VSC8574 0x000704a0 #define PHY_ID_VSC8662 0x00070660 #define PHY_ID_VSC8221 0x000fc550 @@ -131,6 +132,7 @@ static int vsc82xx_config_intr(struct phy_device *phydev) err = phy_write(phydev, MII_VSC8244_IMASK, (phydev->drv->phy_id == PHY_ID_VSC8234 || phydev->drv->phy_id == PHY_ID_VSC8244 || + phydev->drv->phy_id == PHY_ID_VSC8514 || phydev->drv->phy_id == PHY_ID_VSC8574) ? MII_VSC8244_IMASK_MASK : MII_VSC8221_IMASK_MASK); @@ -245,6 +247,18 @@ static struct phy_driver vsc82xx_driver[] = { .ack_interrupt = &vsc824x_ack_interrupt, .config_intr = &vsc82xx_config_intr, .driver = { .owner = THIS_MODULE,}, +}, { + .phy_id = PHY_ID_VSC8514, + .name = "Vitesse VSC8514", + .phy_id_mask = 0x000ffff0, + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_init = &vsc824x_config_init, + .config_aneg = &vsc82x4_config_aneg, + .read_status = &genphy_read_status, + .ack_interrupt = &vsc824x_ack_interrupt, + .config_intr = &vsc82xx_config_intr, + .driver = { .owner = THIS_MODULE,}, }, { .phy_id = PHY_ID_VSC8574, .name = "Vitesse VSC8574", @@ -315,6 +329,7 @@ module_exit(vsc82xx_exit); static struct mdio_device_id __maybe_unused vitesse_tbl[] = { { PHY_ID_VSC8234, 0x000ffff0 }, { PHY_ID_VSC8244, 0x000fffc0 }, + { PHY_ID_VSC8514, 0x000ffff0 }, { PHY_ID_VSC8574, 0x000ffff0 }, { PHY_ID_VSC8662, 0x000ffff0 }, { PHY_ID_VSC8221, 0x000ffff0 }, -- cgit v1.2.3 From cd3e22b75c01fe1e075d91504b29019a05d8d373 Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Mon, 25 Nov 2013 17:19:04 +0800 Subject: macvtap: fix tx_dropped counting error After commit 8ffab51b3dfc54876f145f15b351c41f3f703195 (macvlan: lockless tx path), tx stat counter were converted to percpu stat structure. So we need use to this also for tx_dropped in macvtap. Otherwise, the management won't notice the dropping packet in macvtap tx path. Cc: Michael S. Tsirkin Cc: Vlad Yasevich Cc: Eric Dumazet Signed-off-by: Jason Wang Acked-by: Michael S. Tsirkin Acked-by: Vlad Yasevich Signed-off-by: David S. Miller --- drivers/net/macvtap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/macvtap.c b/drivers/net/macvtap.c index dc76670c2f2a..0605da8e25f5 100644 --- a/drivers/net/macvtap.c +++ b/drivers/net/macvtap.c @@ -744,7 +744,7 @@ err: rcu_read_lock(); vlan = rcu_dereference(q->vlan); if (vlan) - vlan->dev->stats.tx_dropped++; + this_cpu_inc(vlan->pcpu_stats->tx_dropped); rcu_read_unlock(); return err; -- cgit v1.2.3 From 66028310aedc782e3a9a221f1a9ec12b7e587e50 Mon Sep 17 00:00:00 2001 From: Gao feng Date: Mon, 25 Nov 2013 17:21:24 +0800 Subject: sit: use kfree_skb to replace dev_kfree_skb In failure case, we should use kfree_skb not dev_kfree_skb to free skbuff, dev_kfree_skb is defined as consume_skb. Trace takes advantage of this point. Signed-off-by: Gao feng Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv6/sit.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c index 8435267836a7..366fbba3359a 100644 --- a/net/ipv6/sit.c +++ b/net/ipv6/sit.c @@ -951,7 +951,7 @@ static netdev_tx_t ipip6_tunnel_xmit(struct sk_buff *skb, if (!new_skb) { ip_rt_put(rt); dev->stats.tx_dropped++; - dev_kfree_skb(skb); + kfree_skb(skb); return NETDEV_TX_OK; } if (skb->sk) @@ -977,7 +977,7 @@ static netdev_tx_t ipip6_tunnel_xmit(struct sk_buff *skb, tx_error_icmp: dst_link_failure(skb); tx_error: - dev_kfree_skb(skb); + kfree_skb(skb); out: dev->stats.tx_errors++; return NETDEV_TX_OK; @@ -1017,7 +1017,7 @@ static netdev_tx_t sit_tunnel_xmit(struct sk_buff *skb, tx_err: dev->stats.tx_errors++; - dev_kfree_skb(skb); + kfree_skb(skb); return NETDEV_TX_OK; } -- cgit v1.2.3 From ae5e8127b712313ec1b99356019ce9226fea8b88 Mon Sep 17 00:00:00 2001 From: Andy Whitcroft Date: Mon, 25 Nov 2013 16:52:34 +0000 Subject: xen-netback: include definition of csum_ipv6_magic We are now using csum_ipv6_magic, include the appropriate header. Avoids the following error: drivers/net/xen-netback/netback.c:1313:4: error: implicit declaration of function 'csum_ipv6_magic' [-Werror=implicit-function-declaration] tcph->check = ~csum_ipv6_magic(&ipv6h->saddr, Signed-off-by: Andy Whitcroft Acked-by: Ian Campbell Signed-off-by: David S. Miller --- drivers/net/xen-netback/netback.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c index 919b6509455c..64f0e0d18b81 100644 --- a/drivers/net/xen-netback/netback.c +++ b/drivers/net/xen-netback/netback.c @@ -39,6 +39,7 @@ #include #include +#include #include #include -- cgit v1.2.3 From bc9627e7e918a85e906c1a3f6d01d9b8ef911a96 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?fran=C3=A7ois=20romieu?= Date: Tue, 26 Nov 2013 00:40:58 +0100 Subject: via-velocity: fix netif_receive_skb use in irq disabled section. 2fdac010bdcf10a30711b6924612dfc40daf19b8 ("via-velocity.c: update napi implementation") overlooked an irq disabling spinlock when the Rx part of the NAPI poll handler was converted from netif_rx to netif_receive_skb. NAPI Rx processing can be taken out of the locked section with a pair of napi_{disable / enable} since it only races with the MTU change function. An heavier rework of the NAPI locking would be able to perform NAPI Tx before Rx where I simply removed one of velocity_tx_srv calls. References: https://bugzilla.redhat.com/show_bug.cgi?id=1022733 Fixes: 2fdac010bdcf (via-velocity.c: update napi implementation) Signed-off-by: Francois Romieu Tested-by: Alex A. Schmidt Cc: Jamie Heilman Cc: Michele Baldessari Cc: Julia Lawall Signed-off-by: David S. Miller --- drivers/net/ethernet/via/via-velocity.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/via/via-velocity.c b/drivers/net/ethernet/via/via-velocity.c index d022bf936572..ad61d26a44f3 100644 --- a/drivers/net/ethernet/via/via-velocity.c +++ b/drivers/net/ethernet/via/via-velocity.c @@ -2172,16 +2172,13 @@ static int velocity_poll(struct napi_struct *napi, int budget) unsigned int rx_done; unsigned long flags; - spin_lock_irqsave(&vptr->lock, flags); /* * Do rx and tx twice for performance (taken from the VIA * out-of-tree driver). */ - rx_done = velocity_rx_srv(vptr, budget / 2); - velocity_tx_srv(vptr); - rx_done += velocity_rx_srv(vptr, budget - rx_done); + rx_done = velocity_rx_srv(vptr, budget); + spin_lock_irqsave(&vptr->lock, flags); velocity_tx_srv(vptr); - /* If budget not fully consumed, exit the polling mode */ if (rx_done < budget) { napi_complete(napi); @@ -2342,6 +2339,8 @@ static int velocity_change_mtu(struct net_device *dev, int new_mtu) if (ret < 0) goto out_free_tmp_vptr_1; + napi_disable(&vptr->napi); + spin_lock_irqsave(&vptr->lock, flags); netif_stop_queue(dev); @@ -2362,6 +2361,8 @@ static int velocity_change_mtu(struct net_device *dev, int new_mtu) velocity_give_many_rx_descs(vptr); + napi_enable(&vptr->napi); + mac_enable_int(vptr->mac_regs); netif_start_queue(dev); -- cgit v1.2.3 From 39af0c409e8c06b51caf7dc43e49ef96ae790a55 Mon Sep 17 00:00:00 2001 From: Baker Zhang Date: Tue, 26 Nov 2013 09:29:15 +0800 Subject: net: remove outdated comment for ipv4 and ipv6 protocol handler since f9242b6b28d61295f2bf7e8adfb1060b382e5381 inet: Sanitize inet{,6} protocol demux. there are not pretended hash tables for ipv4 or ipv6 protocol handler. Signed-off-by: Baker Zhang Signed-off-by: David S. Miller --- net/ipv4/protocol.c | 8 -------- net/ipv6/protocol.c | 4 ---- 2 files changed, 12 deletions(-) diff --git a/net/ipv4/protocol.c b/net/ipv4/protocol.c index ce848461acbb..46d6a1c923a8 100644 --- a/net/ipv4/protocol.c +++ b/net/ipv4/protocol.c @@ -31,10 +31,6 @@ const struct net_protocol __rcu *inet_protos[MAX_INET_PROTOS] __read_mostly; const struct net_offload __rcu *inet_offloads[MAX_INET_PROTOS] __read_mostly; -/* - * Add a protocol handler to the hash tables - */ - int inet_add_protocol(const struct net_protocol *prot, unsigned char protocol) { if (!prot->netns_ok) { @@ -55,10 +51,6 @@ int inet_add_offload(const struct net_offload *prot, unsigned char protocol) } EXPORT_SYMBOL(inet_add_offload); -/* - * Remove a protocol from the hash tables. - */ - int inet_del_protocol(const struct net_protocol *prot, unsigned char protocol) { int ret; diff --git a/net/ipv6/protocol.c b/net/ipv6/protocol.c index 22d1bd4670da..e048cf1bb6a2 100644 --- a/net/ipv6/protocol.c +++ b/net/ipv6/protocol.c @@ -36,10 +36,6 @@ int inet6_add_protocol(const struct inet6_protocol *prot, unsigned char protocol } EXPORT_SYMBOL(inet6_add_protocol); -/* - * Remove a protocol from the hash tables. - */ - int inet6_del_protocol(const struct inet6_protocol *prot, unsigned char protocol) { int ret; -- cgit v1.2.3 From 55485e7b417b640870b14eceec4cfbcb2b3e7a92 Mon Sep 17 00:00:00 2001 From: Ivan Vecera Date: Tue, 26 Nov 2013 17:54:41 +0100 Subject: be2net: call napi_disable() for all event queues The recent be2net commit 6384a4d (adds a support for busy polling) introduces a regression that results in kernel crash. It incorrectly modified be_close() so napi_disable() is called only for the first queue. This breaks a correct pairing of napi_enable/_disable for the rest of event queues and causes a crash in subsequent be_open() call. Cc: Sathya Perla Cc: Subbu Seetharaman Cc: Ajit Khaparde Signed-off-by: Ivan Vecera Acked-by: Ajit Khaparde Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 78a0e859760b..0aec4d23eb58 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -2663,8 +2663,8 @@ static int be_close(struct net_device *netdev) napi_disable(&eqo->napi); be_disable_busy_poll(eqo); } - adapter->flags &= ~BE_FLAGS_NAPI_ENABLED; } + adapter->flags &= ~BE_FLAGS_NAPI_ENABLED; be_async_mcc_disable(adapter); -- cgit v1.2.3 From 71237b6feb8361a00a1cb481a0c901fbee8f82a5 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 28 Nov 2013 18:53:36 -0500 Subject: Revert "be2net: call napi_disable() for all event queues" This reverts commit 55485e7b417b640870b14eceec4cfbcb2b3e7a92. I applied the wrong version of this patch, the right one is coming up next. Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 0aec4d23eb58..78a0e859760b 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -2663,8 +2663,8 @@ static int be_close(struct net_device *netdev) napi_disable(&eqo->napi); be_disable_busy_poll(eqo); } + adapter->flags &= ~BE_FLAGS_NAPI_ENABLED; } - adapter->flags &= ~BE_FLAGS_NAPI_ENABLED; be_async_mcc_disable(adapter); -- cgit v1.2.3 From dff345c5c85df3c5853491b007f6b1b578dc28a4 Mon Sep 17 00:00:00 2001 From: Ivan Vecera Date: Wed, 27 Nov 2013 08:59:32 +0100 Subject: be2net: call napi_disable() for all event queues The recent be2net commit 6384a4d (adds a support for busy polling) introduces a regression that results in kernel crash. It incorrectly modified be_close() so napi_disable() is called only for the first queue. This breaks a correct pairing of napi_enable/_disable for the rest of event queues and causes a crash in subsequent be_open() call. v2: Applied suggestions from Sathya Fixes: 6384a4d ("be2net: add support for ndo_busy_poll") Cc: Sathya Perla Cc: Subbu Seetharaman Cc: Ajit Khaparde Signed-off-by: Ivan Vecera Acked-by: Sathya Perla Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 78a0e859760b..fee64bf10446 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -2658,8 +2658,8 @@ static int be_close(struct net_device *netdev) be_roce_dev_close(adapter); - for_all_evt_queues(adapter, eqo, i) { - if (adapter->flags & BE_FLAGS_NAPI_ENABLED) { + if (adapter->flags & BE_FLAGS_NAPI_ENABLED) { + for_all_evt_queues(adapter, eqo, i) { napi_disable(&eqo->napi); be_disable_busy_poll(eqo); } -- cgit v1.2.3 From 54b2b50c20a61b51199bedb6e5d2f8ec2568fb43 Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Wed, 23 Oct 2013 06:25:40 -0400 Subject: [SCSI] Disable WRITE SAME for RAID and virtual host adapter drivers Some host adapters do not pass commands through to the target disk directly. Instead they provide an emulated target which may or may not accurately report its capabilities. In some cases the physical device characteristics are reported even when the host adapter is processing commands on the device's behalf. This can lead to adapter firmware hangs or excessive I/O errors. This patch disables WRITE SAME for devices connected to host adapters that provide an emulated target. Driver writers can disable WRITE SAME by setting the no_write_same flag in the host adapter template. [jejb: fix up rejections due to eh_deadline patch] Signed-off-by: Martin K. Petersen Cc: stable@kernel.org Signed-off-by: James Bottomley --- drivers/ata/libata-scsi.c | 1 + drivers/firewire/sbp2.c | 1 + drivers/scsi/3w-9xxx.c | 3 ++- drivers/scsi/3w-sas.c | 3 ++- drivers/scsi/3w-xxxx.c | 3 ++- drivers/scsi/aacraid/linit.c | 1 + drivers/scsi/arcmsr/arcmsr_hba.c | 1 + drivers/scsi/gdth.c | 1 + drivers/scsi/hosts.c | 1 + drivers/scsi/hpsa.c | 1 + drivers/scsi/ipr.c | 3 ++- drivers/scsi/ips.c | 1 + drivers/scsi/megaraid.c | 1 + drivers/scsi/megaraid/megaraid_mbox.c | 1 + drivers/scsi/megaraid/megaraid_sas_base.c | 1 + drivers/scsi/pmcraid.c | 1 + drivers/scsi/sd.c | 6 ++++++ drivers/scsi/storvsc_drv.c | 1 + include/scsi/scsi_host.h | 6 ++++++ 19 files changed, 33 insertions(+), 4 deletions(-) diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index db6dfcfa3e2e..ab58556d347c 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -3625,6 +3625,7 @@ int ata_scsi_add_hosts(struct ata_host *host, struct scsi_host_template *sht) shost->max_lun = 1; shost->max_channel = 1; shost->max_cmd_len = 16; + shost->no_write_same = 1; /* Schedule policy is determined by ->qc_defer() * callback and it needs to see every deferred qc. diff --git a/drivers/firewire/sbp2.c b/drivers/firewire/sbp2.c index 281029daf98c..b0bb056458a3 100644 --- a/drivers/firewire/sbp2.c +++ b/drivers/firewire/sbp2.c @@ -1623,6 +1623,7 @@ static struct scsi_host_template scsi_driver_template = { .cmd_per_lun = 1, .can_queue = 1, .sdev_attrs = sbp2_scsi_sysfs_attrs, + .no_write_same = 1, }; MODULE_AUTHOR("Kristian Hoegsberg "); diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c index 5e1e12c0cf42..0a7325361d29 100644 --- a/drivers/scsi/3w-9xxx.c +++ b/drivers/scsi/3w-9xxx.c @@ -2025,7 +2025,8 @@ static struct scsi_host_template driver_template = { .cmd_per_lun = TW_MAX_CMDS_PER_LUN, .use_clustering = ENABLE_CLUSTERING, .shost_attrs = twa_host_attrs, - .emulated = 1 + .emulated = 1, + .no_write_same = 1, }; /* This function will probe and initialize a card */ diff --git a/drivers/scsi/3w-sas.c b/drivers/scsi/3w-sas.c index c845bdbeb6c0..4de346017e9f 100644 --- a/drivers/scsi/3w-sas.c +++ b/drivers/scsi/3w-sas.c @@ -1600,7 +1600,8 @@ static struct scsi_host_template driver_template = { .cmd_per_lun = TW_MAX_CMDS_PER_LUN, .use_clustering = ENABLE_CLUSTERING, .shost_attrs = twl_host_attrs, - .emulated = 1 + .emulated = 1, + .no_write_same = 1, }; /* This function will probe and initialize a card */ diff --git a/drivers/scsi/3w-xxxx.c b/drivers/scsi/3w-xxxx.c index b9276d10b25c..752624e6bc00 100644 --- a/drivers/scsi/3w-xxxx.c +++ b/drivers/scsi/3w-xxxx.c @@ -2279,7 +2279,8 @@ static struct scsi_host_template driver_template = { .cmd_per_lun = TW_MAX_CMDS_PER_LUN, .use_clustering = ENABLE_CLUSTERING, .shost_attrs = tw_host_attrs, - .emulated = 1 + .emulated = 1, + .no_write_same = 1, }; /* This function will probe and initialize a card */ diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c index f0d432c139d0..4921ed19a027 100644 --- a/drivers/scsi/aacraid/linit.c +++ b/drivers/scsi/aacraid/linit.c @@ -1081,6 +1081,7 @@ static struct scsi_host_template aac_driver_template = { #endif .use_clustering = ENABLE_CLUSTERING, .emulated = 1, + .no_write_same = 1, }; static void __aac_shutdown(struct aac_dev * aac) diff --git a/drivers/scsi/arcmsr/arcmsr_hba.c b/drivers/scsi/arcmsr/arcmsr_hba.c index 97fd450aff09..4f6a30b8e5f9 100644 --- a/drivers/scsi/arcmsr/arcmsr_hba.c +++ b/drivers/scsi/arcmsr/arcmsr_hba.c @@ -137,6 +137,7 @@ static struct scsi_host_template arcmsr_scsi_host_template = { .cmd_per_lun = ARCMSR_MAX_CMD_PERLUN, .use_clustering = ENABLE_CLUSTERING, .shost_attrs = arcmsr_host_attrs, + .no_write_same = 1, }; static struct pci_device_id arcmsr_device_id_table[] = { {PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1110)}, diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c index ee4fa40a50b1..ce5ef0190bad 100644 --- a/drivers/scsi/gdth.c +++ b/drivers/scsi/gdth.c @@ -4684,6 +4684,7 @@ static struct scsi_host_template gdth_template = { .cmd_per_lun = GDTH_MAXC_P_L, .unchecked_isa_dma = 1, .use_clustering = ENABLE_CLUSTERING, + .no_write_same = 1, }; #ifdef CONFIG_ISA diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c index f334859024c0..f2c5005f312a 100644 --- a/drivers/scsi/hosts.c +++ b/drivers/scsi/hosts.c @@ -395,6 +395,7 @@ struct Scsi_Host *scsi_host_alloc(struct scsi_host_template *sht, int privsize) shost->use_clustering = sht->use_clustering; shost->ordered_tag = sht->ordered_tag; shost->eh_deadline = shost_eh_deadline * HZ; + shost->no_write_same = sht->no_write_same; if (sht->supported_mode == MODE_UNKNOWN) /* means we didn't set it ... default to INITIATOR */ diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index 22f6432eb475..2336beff7a48 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -561,6 +561,7 @@ static struct scsi_host_template hpsa_driver_template = { .sdev_attrs = hpsa_sdev_attrs, .shost_attrs = hpsa_shost_attrs, .max_sectors = 8192, + .no_write_same = 1, }; diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index 36ac1c34ce97..573f4128b6b6 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -6305,7 +6305,8 @@ static struct scsi_host_template driver_template = { .use_clustering = ENABLE_CLUSTERING, .shost_attrs = ipr_ioa_attrs, .sdev_attrs = ipr_dev_attrs, - .proc_name = IPR_NAME + .proc_name = IPR_NAME, + .no_write_same = 1, }; /** diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c index 8d5ea8a1e5a6..52a216f21ae5 100644 --- a/drivers/scsi/ips.c +++ b/drivers/scsi/ips.c @@ -374,6 +374,7 @@ static struct scsi_host_template ips_driver_template = { .sg_tablesize = IPS_MAX_SG, .cmd_per_lun = 3, .use_clustering = ENABLE_CLUSTERING, + .no_write_same = 1, }; diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c index 90c95a3385d1..816db12ef5d5 100644 --- a/drivers/scsi/megaraid.c +++ b/drivers/scsi/megaraid.c @@ -4244,6 +4244,7 @@ static struct scsi_host_template megaraid_template = { .eh_device_reset_handler = megaraid_reset, .eh_bus_reset_handler = megaraid_reset, .eh_host_reset_handler = megaraid_reset, + .no_write_same = 1, }; static int diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c index d1a4b82836ea..e2237a97cb9d 100644 --- a/drivers/scsi/megaraid/megaraid_mbox.c +++ b/drivers/scsi/megaraid/megaraid_mbox.c @@ -367,6 +367,7 @@ static struct scsi_host_template megaraid_template_g = { .eh_host_reset_handler = megaraid_reset_handler, .change_queue_depth = megaraid_change_queue_depth, .use_clustering = ENABLE_CLUSTERING, + .no_write_same = 1, .sdev_attrs = megaraid_sdev_attrs, .shost_attrs = megaraid_shost_attrs, }; diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c index 0a743a5d1647..c99812bf2a73 100644 --- a/drivers/scsi/megaraid/megaraid_sas_base.c +++ b/drivers/scsi/megaraid/megaraid_sas_base.c @@ -2148,6 +2148,7 @@ static struct scsi_host_template megasas_template = { .bios_param = megasas_bios_param, .use_clustering = ENABLE_CLUSTERING, .change_queue_depth = megasas_change_queue_depth, + .no_write_same = 1, }; /** diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c index bd6f743d87a7..f413ef796b43 100644 --- a/drivers/scsi/pmcraid.c +++ b/drivers/scsi/pmcraid.c @@ -4315,6 +4315,7 @@ static struct scsi_host_template pmcraid_host_template = { .this_id = -1, .sg_tablesize = PMCRAID_MAX_IOADLS, .max_sectors = PMCRAID_IOA_MAX_SECTORS, + .no_write_same = 1, .cmd_per_lun = PMCRAID_MAX_CMD_PER_LUN, .use_clustering = ENABLE_CLUSTERING, .shost_attrs = pmcraid_host_attrs, diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index e6c4bff04339..69725f7c32c1 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -2659,6 +2659,12 @@ static void sd_read_write_same(struct scsi_disk *sdkp, unsigned char *buffer) { struct scsi_device *sdev = sdkp->device; + if (sdev->host->no_write_same) { + sdev->no_write_same = 1; + + return; + } + if (scsi_report_opcode(sdev, buffer, SD_BUF_SIZE, INQUIRY) < 0) { /* too large values might cause issues with arcmsr */ int vpd_buf_len = 64; diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c index 1a28f5632797..17d740427240 100644 --- a/drivers/scsi/storvsc_drv.c +++ b/drivers/scsi/storvsc_drv.c @@ -1697,6 +1697,7 @@ static struct scsi_host_template scsi_driver = { .use_clustering = DISABLE_CLUSTERING, /* Make sure we dont get a sg segment crosses a page boundary */ .dma_boundary = PAGE_SIZE-1, + .no_write_same = 1, }; enum { diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h index 546084964d55..fe3b58e836c8 100644 --- a/include/scsi/scsi_host.h +++ b/include/scsi/scsi_host.h @@ -475,6 +475,9 @@ struct scsi_host_template { */ unsigned ordered_tag:1; + /* True if the controller does not support WRITE SAME */ + unsigned no_write_same:1; + /* * Countdown for host blocking with no commands outstanding. */ @@ -677,6 +680,9 @@ struct Scsi_Host { /* Don't resume host in EH */ unsigned eh_noresume:1; + /* The controller does not support WRITE SAME */ + unsigned no_write_same:1; + /* * Optional work queue to be utilized by the transport */ -- cgit v1.2.3 From fdeadb43fdf1e7d5698c027b555c389174548e5a Mon Sep 17 00:00:00 2001 From: Madper Xie Date: Fri, 29 Nov 2013 15:58:57 +0800 Subject: efi-pstore: Make efi-pstore return a unique id Pstore fs expects that backends provide a unique id which could avoid pstore making entries as duplication or denominating entries the same name. So I combine the timestamp, part and count into id. Signed-off-by: Madper Xie Cc: Seiji Aguchi Cc: stable@vger.kernel.org Signed-off-by: Matt Fleming --- drivers/firmware/efi/efi-pstore.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) diff --git a/drivers/firmware/efi/efi-pstore.c b/drivers/firmware/efi/efi-pstore.c index 6ce31e93da55..743fd426f21b 100644 --- a/drivers/firmware/efi/efi-pstore.c +++ b/drivers/firmware/efi/efi-pstore.c @@ -37,6 +37,12 @@ struct pstore_read_data { char **buf; }; +static inline u64 generic_id(unsigned long timestamp, + unsigned int part, int count) +{ + return (timestamp * 100 + part) * 1000 + count; +} + static int efi_pstore_read_func(struct efivar_entry *entry, void *data) { efi_guid_t vendor = LINUX_EFI_CRASH_GUID; @@ -55,7 +61,7 @@ static int efi_pstore_read_func(struct efivar_entry *entry, void *data) if (sscanf(name, "dump-type%u-%u-%d-%lu-%c", cb_data->type, &part, &cnt, &time, &data_type) == 5) { - *cb_data->id = part; + *cb_data->id = generic_id(time, part, cnt); *cb_data->count = cnt; cb_data->timespec->tv_sec = time; cb_data->timespec->tv_nsec = 0; @@ -65,7 +71,7 @@ static int efi_pstore_read_func(struct efivar_entry *entry, void *data) *cb_data->compressed = false; } else if (sscanf(name, "dump-type%u-%u-%d-%lu", cb_data->type, &part, &cnt, &time) == 4) { - *cb_data->id = part; + *cb_data->id = generic_id(time, part, cnt); *cb_data->count = cnt; cb_data->timespec->tv_sec = time; cb_data->timespec->tv_nsec = 0; @@ -77,7 +83,7 @@ static int efi_pstore_read_func(struct efivar_entry *entry, void *data) * which doesn't support holding * multiple logs, remains. */ - *cb_data->id = part; + *cb_data->id = generic_id(time, part, 0); *cb_data->count = 0; cb_data->timespec->tv_sec = time; cb_data->timespec->tv_nsec = 0; @@ -320,14 +326,16 @@ static int efi_pstore_erase(enum pstore_type_id type, u64 id, int count, char name[DUMP_NAME_LEN]; efi_char16_t efi_name[DUMP_NAME_LEN]; int found, i; + unsigned int part; - sprintf(name, "dump-type%u-%u-%d-%lu", type, (unsigned int)id, count, - time.tv_sec); + do_div(id, 1000); + part = do_div(id, 100); + sprintf(name, "dump-type%u-%u-%d-%lu", type, part, count, time.tv_sec); for (i = 0; i < DUMP_NAME_LEN; i++) efi_name[i] = name[i]; - edata.id = id; + edata.id = part; edata.type = type; edata.count = count; edata.time = time; -- cgit v1.2.3 From 0e576acbc1d9600cf2d9b4a141a2554639959d50 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 29 Nov 2013 12:18:13 +0100 Subject: nohz: Fix another inconsistency between CONFIG_NO_HZ=n and nohz=off If CONFIG_NO_HZ=n tick_nohz_get_sleep_length() returns NSEC_PER_SEC/HZ. If CONFIG_NO_HZ=y and the nohz functionality is disabled via the command line option "nohz=off" or not enabled due to missing hardware support, then tick_nohz_get_sleep_length() returns 0. That happens because ts->sleep_length is never set in that case. Set it to NSEC_PER_SEC/HZ when the NOHZ mode is inactive. Reported-by: Michal Hocko Reported-by: Borislav Petkov Signed-off-by: Thomas Gleixner --- kernel/time/tick-sched.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c index a12df5abde0b..ea20f7d1ac2c 100644 --- a/kernel/time/tick-sched.c +++ b/kernel/time/tick-sched.c @@ -711,8 +711,10 @@ static bool can_stop_idle_tick(int cpu, struct tick_sched *ts) return false; } - if (unlikely(ts->nohz_mode == NOHZ_MODE_INACTIVE)) + if (unlikely(ts->nohz_mode == NOHZ_MODE_INACTIVE)) { + ts->sleep_length = (ktime_t) { .tv64 = NSEC_PER_SEC/HZ }; return false; + } if (need_resched()) return false; -- cgit v1.2.3 From 006da7b07bc4d3a7ffabad17cf639eec6849c9dc Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Tue, 26 Nov 2013 12:37:12 -0500 Subject: macvtap: Do not double-count received packets Currently macvlan will count received packets after calling each vlans receive handler. Macvtap attempts to count the packet yet again when the user reads the packet from the tap socket. This code doesn't do this consistently either. Remove the counting from macvtap and let only macvlan count received packets. Signed-off-by: Vlad Yasevich Acked-by: Michael S. Tsirkin Acked-by: Jason Wang Signed-off-by: David S. Miller --- drivers/net/macvtap.c | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/drivers/net/macvtap.c b/drivers/net/macvtap.c index 0605da8e25f5..9093004f9b63 100644 --- a/drivers/net/macvtap.c +++ b/drivers/net/macvtap.c @@ -767,7 +767,6 @@ static ssize_t macvtap_put_user(struct macvtap_queue *q, const struct sk_buff *skb, const struct iovec *iv, int len) { - struct macvlan_dev *vlan; int ret; int vnet_hdr_len = 0; int vlan_offset = 0; @@ -821,15 +820,6 @@ static ssize_t macvtap_put_user(struct macvtap_queue *q, copied += len; done: - rcu_read_lock(); - vlan = rcu_dereference(q->vlan); - if (vlan) { - preempt_disable(); - macvlan_count_rx(vlan, copied - vnet_hdr_len, ret == 0, 0); - preempt_enable(); - } - rcu_read_unlock(); - return ret ? ret : copied; } -- cgit v1.2.3 From ec6f809ff6f19fafba3212f6aff0dda71dfac8e8 Mon Sep 17 00:00:00 2001 From: Veaceslav Falico Date: Fri, 29 Nov 2013 09:53:23 +0100 Subject: af_packet: block BH in prb_shutdown_retire_blk_timer() Currently we're using plain spin_lock() in prb_shutdown_retire_blk_timer(), however the timer might fire right in the middle and thus try to re-aquire the same spinlock, leaving us in a endless loop. To fix that, use the spin_lock_bh() to block it. Fixes: f6fb8f100b80 ("af-packet: TPACKET_V3 flexible buffer implementation.") CC: "David S. Miller" CC: Daniel Borkmann CC: Willem de Bruijn CC: Phil Sutter CC: Eric Dumazet Reported-by: Jan Stancek Tested-by: Jan Stancek Signed-off-by: Veaceslav Falico Acked-by: Daniel Borkmann Signed-off-by: David S. Miller --- net/packet/af_packet.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c index ac27c86ef6d1..ba2548bd85bf 100644 --- a/net/packet/af_packet.c +++ b/net/packet/af_packet.c @@ -439,9 +439,9 @@ static void prb_shutdown_retire_blk_timer(struct packet_sock *po, pkc = tx_ring ? &po->tx_ring.prb_bdqc : &po->rx_ring.prb_bdqc; - spin_lock(&rb_queue->lock); + spin_lock_bh(&rb_queue->lock); pkc->delete_blk_timer = 1; - spin_unlock(&rb_queue->lock); + spin_unlock_bh(&rb_queue->lock); prb_del_retire_blk_timer(pkc); } -- cgit v1.2.3 From db31c55a6fb245fdbb752a2ca4aefec89afabb06 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 27 Nov 2013 15:40:21 +0300 Subject: net: clamp ->msg_namelen instead of returning an error If kmsg->msg_namelen > sizeof(struct sockaddr_storage) then in the original code that would lead to memory corruption in the kernel if you had audit configured. If you didn't have audit configured it was harmless. There are some programs such as beta versions of Ruby which use too large of a buffer and returning an error code breaks them. We should clamp the ->msg_namelen value instead. Fixes: 1661bf364ae9 ("net: heap overflow in __audit_sockaddr()") Reported-by: Eric Wong Signed-off-by: Dan Carpenter Tested-by: Eric Wong Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/compat.c | 2 +- net/socket.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/net/compat.c b/net/compat.c index 618c6a8a911b..dd32e34c1e2c 100644 --- a/net/compat.c +++ b/net/compat.c @@ -72,7 +72,7 @@ int get_compat_msghdr(struct msghdr *kmsg, struct compat_msghdr __user *umsg) __get_user(kmsg->msg_flags, &umsg->msg_flags)) return -EFAULT; if (kmsg->msg_namelen > sizeof(struct sockaddr_storage)) - return -EINVAL; + kmsg->msg_namelen = sizeof(struct sockaddr_storage); kmsg->msg_name = compat_ptr(tmp1); kmsg->msg_iov = compat_ptr(tmp2); kmsg->msg_control = compat_ptr(tmp3); diff --git a/net/socket.c b/net/socket.c index 0b18693f2be6..e83c416708af 100644 --- a/net/socket.c +++ b/net/socket.c @@ -1973,7 +1973,7 @@ static int copy_msghdr_from_user(struct msghdr *kmsg, if (copy_from_user(kmsg, umsg, sizeof(struct msghdr))) return -EFAULT; if (kmsg->msg_namelen > sizeof(struct sockaddr_storage)) - return -EINVAL; + kmsg->msg_namelen = sizeof(struct sockaddr_storage); return 0; } -- cgit v1.2.3 From 1bac1072425c86f1ac85bd5967910706677ef8b3 Mon Sep 17 00:00:00 2001 From: David Chang Date: Wed, 27 Nov 2013 15:48:36 +0800 Subject: r8169: check ALDPS bit and disable it if enabled for the 8168g Windows driver will enable ALDPS function, but linux driver and firmware do not have any configuration related to ALDPS function for 8168g. So restart system to linux and remove the NIC cable, LAN enter ALDPS, then LAN RX will be disabled. This issue can be easily reproduced on dual boot windows and linux system with RTL_GIGA_MAC_VER_40 chip. Realtek said, ALDPS function can be disabled by configuring to PHY, switch to page 0x0A43, reg0x10 bit2=0. Signed-off-by: David Chang Acked-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index 799387570766..c737f0ea5de7 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -3465,6 +3465,11 @@ static void rtl8168g_1_hw_phy_config(struct rtl8169_private *tp) rtl_writephy(tp, 0x14, 0x9065); rtl_writephy(tp, 0x14, 0x1065); + /* Check ALDPS bit, disable it if enabled */ + rtl_writephy(tp, 0x1f, 0x0a43); + if (rtl_readphy(tp, 0x10) & 0x0004) + rtl_w1w0_phy(tp, 0x10, 0x0000, 0x0004); + rtl_writephy(tp, 0x1f, 0x0000); } -- cgit v1.2.3 From 7fe0ee099ad5e3dea88d4ee1b6f20246b1ca57c3 Mon Sep 17 00:00:00 2001 From: Yang Yingliang Date: Wed, 27 Nov 2013 14:32:52 +0800 Subject: net: 8139cp: fix a BUG_ON triggered by wrong bytes_compl Using iperf to send packets(GSO mode is on), a bug is triggered: [ 212.672781] kernel BUG at lib/dynamic_queue_limits.c:26! [ 212.673396] invalid opcode: 0000 [#1] SMP [ 212.673882] Modules linked in: 8139cp(O) nls_utf8 edd fuse loop dm_mod ipv6 i2c_piix4 8139too i2c_core intel_agp joydev pcspkr hid_generic intel_gtt floppy sr_mod mii button sg cdrom ext3 jbd mbcache usbhid hid uhci_hcd ehci_hcd usbcore sd_mod usb_common crc_t10dif crct10dif_common processor thermal_sys hwmon scsi_dh_emc scsi_dh_rdac scsi_dh_hp_sw scsi_dh ata_generic ata_piix libata scsi_mod [last unloaded: 8139cp] [ 212.676084] CPU: 0 PID: 4124 Comm: iperf Tainted: G O 3.12.0-0.7-default+ #16 [ 212.676084] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 [ 212.676084] task: ffff8800d83966c0 ti: ffff8800db4c8000 task.ti: ffff8800db4c8000 [ 212.676084] RIP: 0010:[] [] dql_completed+0x17f/0x190 [ 212.676084] RSP: 0018:ffff880116e03e30 EFLAGS: 00010083 [ 212.676084] RAX: 00000000000005ea RBX: 0000000000000f7c RCX: 0000000000000002 [ 212.676084] RDX: ffff880111dd0dc0 RSI: 0000000000000bd4 RDI: ffff8800db6ffcc0 [ 212.676084] RBP: ffff880116e03e48 R08: 0000000000000992 R09: 0000000000000000 [ 212.676084] R10: ffffffff8181e400 R11: 0000000000000004 R12: 000000000000000f [ 212.676084] R13: ffff8800d94ec840 R14: ffff8800db440c80 R15: 000000000000000e [ 212.676084] FS: 00007f6685a3c700(0000) GS:ffff880116e00000(0000) knlGS:0000000000000000 [ 212.676084] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 212.676084] CR2: 00007f6685ad6460 CR3: 00000000db714000 CR4: 00000000000006f0 [ 212.676084] Stack: [ 212.676084] ffff8800db6ffc00 000000000000000f ffff8800d94ec840 ffff880116e03eb8 [ 212.676084] ffffffffa041509f ffff880116e03e88 0000000f16e03e88 ffff8800d94ec000 [ 212.676084] 00000bd400059858 000000050000000f ffffffff81094c36 ffff880116e03eb8 [ 212.676084] Call Trace: [ 212.676084] [ 212.676084] [] cp_interrupt+0x4ef/0x590 [8139cp] [ 212.676084] [] ? ktime_get+0x56/0xd0 [ 212.676084] [] handle_irq_event_percpu+0x53/0x170 [ 212.676084] [] handle_irq_event+0x3c/0x60 [ 212.676084] [] handle_fasteoi_irq+0x55/0xf0 [ 212.676084] [] handle_irq+0x1f/0x30 [ 212.676084] [] do_IRQ+0x5b/0xe0 [ 212.676084] [] common_interrupt+0x6a/0x6a [ 212.676084] [ 212.676084] [] ? cp_start_xmit+0x621/0x97c [8139cp] [ 212.676084] [] ? cp_start_xmit+0x609/0x97c [8139cp] [ 212.676084] [] dev_hard_start_xmit+0x2c9/0x550 [ 212.676084] [] sch_direct_xmit+0x179/0x1d0 [ 212.676084] [] dev_queue_xmit+0x293/0x440 [ 212.676084] [] ip_finish_output+0x236/0x450 [ 212.676084] [] ? __alloc_pages_nodemask+0x187/0xb10 [ 212.676084] [] ip_output+0x88/0x90 [ 212.676084] [] ip_local_out+0x24/0x30 [ 212.676084] [] ip_queue_xmit+0x14d/0x3e0 [ 212.676084] [] tcp_transmit_skb+0x501/0x840 [ 212.676084] [] tcp_write_xmit+0x1e3/0xb20 [ 212.676084] [] ? skb_page_frag_refill+0x87/0xd0 [ 212.676084] [] tcp_push_one+0x2b/0x40 [ 212.676084] [] tcp_sendmsg+0x926/0xc90 [ 212.676084] [] inet_sendmsg+0x61/0xc0 [ 212.676084] [] sock_aio_write+0x101/0x120 [ 212.676084] [] ? vma_adjust+0x2e1/0x5d0 [ 212.676084] [] ? timerqueue_add+0x60/0xb0 [ 212.676084] [] do_sync_write+0x60/0x90 [ 212.676084] [] ? rw_verify_area+0x54/0xf0 [ 212.676084] [] vfs_write+0x186/0x190 [ 212.676084] [] SyS_write+0x5d/0xa0 [ 212.676084] [] system_call_fastpath+0x16/0x1b [ 212.676084] Code: ca 41 89 dc 41 29 cc 45 31 db 29 c2 41 89 c5 89 d0 45 29 c5 f7 d0 c1 e8 1f e9 43 ff ff ff 66 0f 1f 44 00 00 31 c0 e9 7b ff ff ff <0f> 0b eb fe 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 c7 47 40 00 [ 212.676084] RIP [] dql_completed+0x17f/0x190 ------------[ cut here ]------------ When a skb has frags, bytes_compl plus skb->len nr_frags times in cp_tx(). It's not the correct value(actually, it should plus skb->len once) and it will trigger the BUG_ON(bytes_compl > num_queued - dql->num_completed). So only increase bytes_compl when finish sending all frags. pkts_compl also has a wrong value, fix it too. It's introduced by commit 871f0d4c ("8139cp: enable bql"). Suggested-by: Eric Dumazet Signed-off-by: Yang Yingliang Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/8139cp.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/realtek/8139cp.c b/drivers/net/ethernet/realtek/8139cp.c index f2a2128165dd..737c1a881f78 100644 --- a/drivers/net/ethernet/realtek/8139cp.c +++ b/drivers/net/ethernet/realtek/8139cp.c @@ -678,9 +678,6 @@ static void cp_tx (struct cp_private *cp) le32_to_cpu(txd->opts1) & 0xffff, PCI_DMA_TODEVICE); - bytes_compl += skb->len; - pkts_compl++; - if (status & LastFrag) { if (status & (TxError | TxFIFOUnder)) { netif_dbg(cp, tx_err, cp->dev, @@ -702,6 +699,8 @@ static void cp_tx (struct cp_private *cp) netif_dbg(cp, tx_done, cp->dev, "tx done, slot %d\n", tx_tail); } + bytes_compl += skb->len; + pkts_compl++; dev_kfree_skb_irq(skb); } -- cgit v1.2.3 From b268daffdcb9762ad9aa3898096570a9dd92aa9b Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 27 Nov 2013 13:33:21 +0100 Subject: net: smc91: fix crash regression on the versatile After commit e9e4ea74f06635f2ffc1dffe5ef40c854faa0a90 "net: smc91x: dont't use SMC_outw for fixing up halfword-aligned data" The Versatile SMSC LAN91C111 is crashing like this: ------------[ cut here ]------------ kernel BUG at /home/linus/linux/drivers/net/ethernet/smsc/smc91x.c:599! Internal error: Oops - BUG: 0 [#1] ARM Modules linked in: CPU: 0 PID: 43 Comm: udhcpc Not tainted 3.13.0-rc1+ #24 task: c6ccfaa0 ti: c6cd0000 task.ti: c6cd0000 PC is at smc_hardware_send_pkt+0x198/0x22c LR is at smc_hardware_send_pkt+0x24/0x22c pc : [] lr : [] psr: 20000013 sp : c6cd1d08 ip : 00000001 fp : 00000000 r10: c02adb08 r9 : 00000000 r8 : c6ced802 r7 : c786fba0 r6 : 00000146 r5 : c8800000 r4 : c78d6000 r3 : 0000000f r2 : 00000146 r1 : 00000000 r0 : 00000031 Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 0005317f Table: 06cf4000 DAC: 00000015 Process udhcpc (pid: 43, stack limit = 0xc6cd01c0) Stack: (0xc6cd1d08 to 0xc6cd2000) 1d00: 00000010 c8800000 c78d6000 c786fba0 c78d6000 c01be868 1d20: c01be7a4 00004000 00000000 c786fba0 c6c12b80 c0208554 000004d0 c780fc60 1d40: 00000220 c01fb734 00000000 00000000 00000000 c6c9a440 c6c12b80 c78d6000 1d60: c786fba0 c6c9a440 00000000 c021d1d8 00000000 00000000 c6c12b80 c78d6000 1d80: c786fba0 00000001 c6c9a440 c02087f8 c6c9a4a0 00080008 00000000 00000000 1da0: c78d6000 c786fba0 c78d6000 00000138 00000000 00000000 00000000 00000000 1dc0: 00000000 c027ba74 00000138 00000138 00000001 00000010 c6cedc00 00000000 1de0: 00000008 c7404400 c6cd1eec c6cd1f14 c067a73c c065c0b8 00000000 c067a740 1e00: 01ffffff 002040d0 00000000 00000000 00000000 00000000 00000000 ffffffff 1e20: 43004400 00110022 c6cdef20 c027ae8c c6ccfaa0 be82d65c 00000014 be82d3cc 1e40: 00000000 00000000 00000000 c01f2870 00000000 00000000 00000000 c6cd1e88 1e60: c6ccfaa0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1e80: 00000000 00000000 00000031 c7802310 c7802300 00000138 c7404400 c0771da0 1ea0: 00000000 c6cd1eec c7800340 00000138 be82d65c 00000014 be82d3cc c6cd1f08 1ec0: 00000014 00000000 c7404400 c7404400 00000138 c01f4628 c78d6000 00000000 1ee0: 00000000 be82d3cc 00000138 c6cd1f08 00000014 c6cd1ee4 00000001 00000000 1f00: 00000000 00000000 00080011 00000002 06000000 ffffffff 0000ffff 00000002 1f20: 06000000 ffffffff 0000ffff c00928c8 c065c520 c6cd1f58 00000003 c009299c 1f40: 00000003 c065c520 c7404400 00000000 c7404400 c01f2218 c78106b0 c7441cb0 1f60: 00000000 00000006 c06799fc 00000000 00000000 00000006 00000000 c01f3ee0 1f80: 00000000 00000000 be82d678 be82d65c 00000014 00000001 00000122 c00139c8 1fa0: c6cd0000 c0013840 be82d65c 00000014 00000006 be82d3cc 00000138 00000000 1fc0: be82d65c 00000014 00000001 00000122 00000000 00000000 00018cb1 00000000 1fe0: 00003801 be82d3a8 0003a0c7 b6e9af08 60000010 00000006 00000000 00000000 [] (smc_hardware_send_pkt+0x198/0x22c) from [] (smc_hard_start_xmit+0xc4/0x1e8) [] (smc_hard_start_xmit+0xc4/0x1e8) from [] (dev_hard_start_xmit+0x460/0x4cc) [] (dev_hard_start_xmit+0x460/0x4cc) from [] (sch_direct_xmit+0x94/0x18c) [] (sch_direct_xmit+0x94/0x18c) from [] (dev_queue_xmit+0x238/0x42c) [] (dev_queue_xmit+0x238/0x42c) from [] (packet_sendmsg+0xbe8/0xd28) [] (packet_sendmsg+0xbe8/0xd28) from [] (sock_sendmsg+0x84/0xa8) [] (sock_sendmsg+0x84/0xa8) from [] (SyS_sendto+0xb8/0xdc) [] (SyS_sendto+0xb8/0xdc) from [] (ret_fast_syscall+0x0/0x2c) Code: e3130002 1a000001 e3130001 0affffcd (e7f001f2) ---[ end trace 81104fe70e8da7fe ]--- Kernel panic - not syncing: Fatal exception in interrupt This is because the macro operations in smc91x.h defined for Versatile are missing SMC_outsw() as used in this commit. The Versatile needs and uses the same accessors as the other platforms in the first if(...) clause, just switch it to using that and we have one problem less to worry about. Checkpatch complains about spacing, but I have opted to follow the style of this .h-file. Cc: Russell King Cc: Nicolas Pitre Cc: Eric Miao Cc: Jonathan Cameron Cc: Will Deacon Cc: stable@vger.kernel.org Signed-off-by: Linus Walleij Signed-off-by: David S. Miller --- drivers/net/ethernet/smsc/smc91x.h | 20 ++------------------ 1 file changed, 2 insertions(+), 18 deletions(-) diff --git a/drivers/net/ethernet/smsc/smc91x.h b/drivers/net/ethernet/smsc/smc91x.h index c9d4c872e81d..902a7c268d82 100644 --- a/drivers/net/ethernet/smsc/smc91x.h +++ b/drivers/net/ethernet/smsc/smc91x.h @@ -46,7 +46,8 @@ defined(CONFIG_MACH_LITTLETON) ||\ defined(CONFIG_MACH_ZYLONITE2) ||\ defined(CONFIG_ARCH_VIPER) ||\ - defined(CONFIG_MACH_STARGATE2) + defined(CONFIG_MACH_STARGATE2) ||\ + defined(CONFIG_ARCH_VERSATILE) #include @@ -206,23 +207,6 @@ SMC_outw(u16 val, void __iomem *ioaddr, int reg) #define RPC_LSA_DEFAULT RPC_LED_TX_RX #define RPC_LSB_DEFAULT RPC_LED_100_10 -#elif defined(CONFIG_ARCH_VERSATILE) - -#define SMC_CAN_USE_8BIT 1 -#define SMC_CAN_USE_16BIT 1 -#define SMC_CAN_USE_32BIT 1 -#define SMC_NOWAIT 1 - -#define SMC_inb(a, r) readb((a) + (r)) -#define SMC_inw(a, r) readw((a) + (r)) -#define SMC_inl(a, r) readl((a) + (r)) -#define SMC_outb(v, a, r) writeb(v, (a) + (r)) -#define SMC_outw(v, a, r) writew(v, (a) + (r)) -#define SMC_outl(v, a, r) writel(v, (a) + (r)) -#define SMC_insl(a, r, p, l) readsl((a) + (r), p, l) -#define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l) -#define SMC_IRQ_FLAGS (-1) /* from resource */ - #elif defined(CONFIG_MN10300) /* -- cgit v1.2.3 From 9d38d28bd211451533d7a0d1de57485aaf86d00a Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 29 Nov 2013 16:23:14 -0500 Subject: Revert "net: smc91: fix crash regression on the versatile" This reverts commit b268daffdcb9762ad9aa3898096570a9dd92aa9b. I applied the wrong version of this patch, the proper version is coming up next. Signed-off-by: David S. Miller --- drivers/net/ethernet/smsc/smc91x.h | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/smsc/smc91x.h b/drivers/net/ethernet/smsc/smc91x.h index 902a7c268d82..c9d4c872e81d 100644 --- a/drivers/net/ethernet/smsc/smc91x.h +++ b/drivers/net/ethernet/smsc/smc91x.h @@ -46,8 +46,7 @@ defined(CONFIG_MACH_LITTLETON) ||\ defined(CONFIG_MACH_ZYLONITE2) ||\ defined(CONFIG_ARCH_VIPER) ||\ - defined(CONFIG_MACH_STARGATE2) ||\ - defined(CONFIG_ARCH_VERSATILE) + defined(CONFIG_MACH_STARGATE2) #include @@ -207,6 +206,23 @@ SMC_outw(u16 val, void __iomem *ioaddr, int reg) #define RPC_LSA_DEFAULT RPC_LED_TX_RX #define RPC_LSB_DEFAULT RPC_LED_100_10 +#elif defined(CONFIG_ARCH_VERSATILE) + +#define SMC_CAN_USE_8BIT 1 +#define SMC_CAN_USE_16BIT 1 +#define SMC_CAN_USE_32BIT 1 +#define SMC_NOWAIT 1 + +#define SMC_inb(a, r) readb((a) + (r)) +#define SMC_inw(a, r) readw((a) + (r)) +#define SMC_inl(a, r) readl((a) + (r)) +#define SMC_outb(v, a, r) writeb(v, (a) + (r)) +#define SMC_outw(v, a, r) writew(v, (a) + (r)) +#define SMC_outl(v, a, r) writel(v, (a) + (r)) +#define SMC_insl(a, r, p, l) readsl((a) + (r), p, l) +#define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l) +#define SMC_IRQ_FLAGS (-1) /* from resource */ + #elif defined(CONFIG_MN10300) /* -- cgit v1.2.3 From a0c20fb02592d372e744d1d739cda3e1b3defaae Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 28 Nov 2013 14:33:52 +0100 Subject: net: smc91: fix crash regression on the versatile After commit e9e4ea74f06635f2ffc1dffe5ef40c854faa0a90 "net: smc91x: dont't use SMC_outw for fixing up halfword-aligned data" The Versatile SMSC LAN91C111 is crashing like this: ------------[ cut here ]------------ kernel BUG at /home/linus/linux/drivers/net/ethernet/smsc/smc91x.c:599! Internal error: Oops - BUG: 0 [#1] ARM Modules linked in: CPU: 0 PID: 43 Comm: udhcpc Not tainted 3.13.0-rc1+ #24 task: c6ccfaa0 ti: c6cd0000 task.ti: c6cd0000 PC is at smc_hardware_send_pkt+0x198/0x22c LR is at smc_hardware_send_pkt+0x24/0x22c pc : [] lr : [] psr: 20000013 sp : c6cd1d08 ip : 00000001 fp : 00000000 r10: c02adb08 r9 : 00000000 r8 : c6ced802 r7 : c786fba0 r6 : 00000146 r5 : c8800000 r4 : c78d6000 r3 : 0000000f r2 : 00000146 r1 : 00000000 r0 : 00000031 Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 0005317f Table: 06cf4000 DAC: 00000015 Process udhcpc (pid: 43, stack limit = 0xc6cd01c0) Stack: (0xc6cd1d08 to 0xc6cd2000) 1d00: 00000010 c8800000 c78d6000 c786fba0 c78d6000 c01be868 1d20: c01be7a4 00004000 00000000 c786fba0 c6c12b80 c0208554 000004d0 c780fc60 1d40: 00000220 c01fb734 00000000 00000000 00000000 c6c9a440 c6c12b80 c78d6000 1d60: c786fba0 c6c9a440 00000000 c021d1d8 00000000 00000000 c6c12b80 c78d6000 1d80: c786fba0 00000001 c6c9a440 c02087f8 c6c9a4a0 00080008 00000000 00000000 1da0: c78d6000 c786fba0 c78d6000 00000138 00000000 00000000 00000000 00000000 1dc0: 00000000 c027ba74 00000138 00000138 00000001 00000010 c6cedc00 00000000 1de0: 00000008 c7404400 c6cd1eec c6cd1f14 c067a73c c065c0b8 00000000 c067a740 1e00: 01ffffff 002040d0 00000000 00000000 00000000 00000000 00000000 ffffffff 1e20: 43004400 00110022 c6cdef20 c027ae8c c6ccfaa0 be82d65c 00000014 be82d3cc 1e40: 00000000 00000000 00000000 c01f2870 00000000 00000000 00000000 c6cd1e88 1e60: c6ccfaa0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1e80: 00000000 00000000 00000031 c7802310 c7802300 00000138 c7404400 c0771da0 1ea0: 00000000 c6cd1eec c7800340 00000138 be82d65c 00000014 be82d3cc c6cd1f08 1ec0: 00000014 00000000 c7404400 c7404400 00000138 c01f4628 c78d6000 00000000 1ee0: 00000000 be82d3cc 00000138 c6cd1f08 00000014 c6cd1ee4 00000001 00000000 1f00: 00000000 00000000 00080011 00000002 06000000 ffffffff 0000ffff 00000002 1f20: 06000000 ffffffff 0000ffff c00928c8 c065c520 c6cd1f58 00000003 c009299c 1f40: 00000003 c065c520 c7404400 00000000 c7404400 c01f2218 c78106b0 c7441cb0 1f60: 00000000 00000006 c06799fc 00000000 00000000 00000006 00000000 c01f3ee0 1f80: 00000000 00000000 be82d678 be82d65c 00000014 00000001 00000122 c00139c8 1fa0: c6cd0000 c0013840 be82d65c 00000014 00000006 be82d3cc 00000138 00000000 1fc0: be82d65c 00000014 00000001 00000122 00000000 00000000 00018cb1 00000000 1fe0: 00003801 be82d3a8 0003a0c7 b6e9af08 60000010 00000006 00000000 00000000 [] (smc_hardware_send_pkt+0x198/0x22c) from [] (smc_hard_start_xmit+0xc4/0x1e8) [] (smc_hard_start_xmit+0xc4/0x1e8) from [] (dev_hard_start_xmit+0x460/0x4cc) [] (dev_hard_start_xmit+0x460/0x4cc) from [] (sch_direct_xmit+0x94/0x18c) [] (sch_direct_xmit+0x94/0x18c) from [] (dev_queue_xmit+0x238/0x42c) [] (dev_queue_xmit+0x238/0x42c) from [] (packet_sendmsg+0xbe8/0xd28) [] (packet_sendmsg+0xbe8/0xd28) from [] (sock_sendmsg+0x84/0xa8) [] (sock_sendmsg+0x84/0xa8) from [] (SyS_sendto+0xb8/0xdc) [] (SyS_sendto+0xb8/0xdc) from [] (ret_fast_syscall+0x0/0x2c) Code: e3130002 1a000001 e3130001 0affffcd (e7f001f2) ---[ end trace 81104fe70e8da7fe ]--- Kernel panic - not syncing: Fatal exception in interrupt This is because the macro operations in smc91x.h defined for Versatile are missing SMC_outsw() as used in this commit. The Versatile needs and uses the same accessors as the other platforms in the first if(...) clause, just switch it to using that and we have one problem less to worry about. This includes a hunk of a patch from Will Deacon fixin the other 32bit platforms as well: Innokom, Ramses, PXA, PCM027. Checkpatch complains about spacing, but I have opted to follow the style of this .h-file. Cc: Russell King Cc: Nicolas Pitre Cc: Eric Miao Cc: Jonathan Cameron Cc: stable@vger.kernel.org Signed-off-by: Will Deacon Signed-off-by: Linus Walleij Signed-off-by: David S. Miller --- drivers/net/ethernet/smsc/smc91x.h | 22 ++++------------------ 1 file changed, 4 insertions(+), 18 deletions(-) diff --git a/drivers/net/ethernet/smsc/smc91x.h b/drivers/net/ethernet/smsc/smc91x.h index c9d4c872e81d..749654b976bc 100644 --- a/drivers/net/ethernet/smsc/smc91x.h +++ b/drivers/net/ethernet/smsc/smc91x.h @@ -46,7 +46,8 @@ defined(CONFIG_MACH_LITTLETON) ||\ defined(CONFIG_MACH_ZYLONITE2) ||\ defined(CONFIG_ARCH_VIPER) ||\ - defined(CONFIG_MACH_STARGATE2) + defined(CONFIG_MACH_STARGATE2) ||\ + defined(CONFIG_ARCH_VERSATILE) #include @@ -154,6 +155,8 @@ static inline void SMC_outw(u16 val, void __iomem *ioaddr, int reg) #define SMC_outl(v, a, r) writel(v, (a) + (r)) #define SMC_insl(a, r, p, l) readsl((a) + (r), p, l) #define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l) +#define SMC_insw(a, r, p, l) readsw((a) + (r), p, l) +#define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l) #define SMC_IRQ_FLAGS (-1) /* from resource */ /* We actually can't write halfwords properly if not word aligned */ @@ -206,23 +209,6 @@ SMC_outw(u16 val, void __iomem *ioaddr, int reg) #define RPC_LSA_DEFAULT RPC_LED_TX_RX #define RPC_LSB_DEFAULT RPC_LED_100_10 -#elif defined(CONFIG_ARCH_VERSATILE) - -#define SMC_CAN_USE_8BIT 1 -#define SMC_CAN_USE_16BIT 1 -#define SMC_CAN_USE_32BIT 1 -#define SMC_NOWAIT 1 - -#define SMC_inb(a, r) readb((a) + (r)) -#define SMC_inw(a, r) readw((a) + (r)) -#define SMC_inl(a, r) readl((a) + (r)) -#define SMC_outb(v, a, r) writeb(v, (a) + (r)) -#define SMC_outw(v, a, r) writew(v, (a) + (r)) -#define SMC_outl(v, a, r) writel(v, (a) + (r)) -#define SMC_insl(a, r, p, l) readsl((a) + (r), p, l) -#define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l) -#define SMC_IRQ_FLAGS (-1) /* from resource */ - #elif defined(CONFIG_MN10300) /* -- cgit v1.2.3 From 85493e6dd42dcaf0eaf0a19f12f1295e35cc3b7f Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Wed, 27 Nov 2013 18:54:31 -0800 Subject: sfc: Convert to use hwmon_device_register_with_groups Simplify the code. Avoid race conditions caused by attributes being created after hwmon device registration. Implicitly (through hwmon API) add mandatory 'name' sysfs attribute. Reviewed-by: Ben Hutchings Signed-off-by: Guenter Roeck Signed-off-by: David S. Miller --- drivers/net/ethernet/sfc/mcdi.h | 2 + drivers/net/ethernet/sfc/mcdi_mon.c | 78 ++++++++++++++----------------------- 2 files changed, 32 insertions(+), 48 deletions(-) diff --git a/drivers/net/ethernet/sfc/mcdi.h b/drivers/net/ethernet/sfc/mcdi.h index 656a3277c2b2..15816cacb548 100644 --- a/drivers/net/ethernet/sfc/mcdi.h +++ b/drivers/net/ethernet/sfc/mcdi.h @@ -75,6 +75,8 @@ struct efx_mcdi_mon { unsigned long last_update; struct device *device; struct efx_mcdi_mon_attribute *attrs; + struct attribute_group group; + const struct attribute_group *groups[2]; unsigned int n_attrs; }; diff --git a/drivers/net/ethernet/sfc/mcdi_mon.c b/drivers/net/ethernet/sfc/mcdi_mon.c index 4cc5d95b2a5a..d72ad4fc3617 100644 --- a/drivers/net/ethernet/sfc/mcdi_mon.c +++ b/drivers/net/ethernet/sfc/mcdi_mon.c @@ -139,17 +139,10 @@ static int efx_mcdi_mon_update(struct efx_nic *efx) return rc; } -static ssize_t efx_mcdi_mon_show_name(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - return sprintf(buf, "%s\n", KBUILD_MODNAME); -} - static int efx_mcdi_mon_get_entry(struct device *dev, unsigned int index, efx_dword_t *entry) { - struct efx_nic *efx = dev_get_drvdata(dev); + struct efx_nic *efx = dev_get_drvdata(dev->parent); struct efx_mcdi_mon *hwmon = efx_mcdi_mon(efx); int rc; @@ -263,7 +256,7 @@ static ssize_t efx_mcdi_mon_show_label(struct device *dev, efx_mcdi_sensor_type[mon_attr->type].label); } -static int +static void efx_mcdi_mon_add_attr(struct efx_nic *efx, const char *name, ssize_t (*reader)(struct device *, struct device_attribute *, char *), @@ -272,7 +265,6 @@ efx_mcdi_mon_add_attr(struct efx_nic *efx, const char *name, { struct efx_mcdi_mon *hwmon = efx_mcdi_mon(efx); struct efx_mcdi_mon_attribute *attr = &hwmon->attrs[hwmon->n_attrs]; - int rc; strlcpy(attr->name, name, sizeof(attr->name)); attr->index = index; @@ -286,10 +278,7 @@ efx_mcdi_mon_add_attr(struct efx_nic *efx, const char *name, attr->dev_attr.attr.name = attr->name; attr->dev_attr.attr.mode = S_IRUGO; attr->dev_attr.show = reader; - rc = device_create_file(&efx->pci_dev->dev, &attr->dev_attr); - if (rc == 0) - ++hwmon->n_attrs; - return rc; + hwmon->group.attrs[hwmon->n_attrs++] = &attr->dev_attr.attr; } int efx_mcdi_mon_probe(struct efx_nic *efx) @@ -338,26 +327,22 @@ int efx_mcdi_mon_probe(struct efx_nic *efx) efx_mcdi_mon_update(efx); /* Allocate space for the maximum possible number of - * attributes for this set of sensors: name of the driver plus + * attributes for this set of sensors: * value, min, max, crit, alarm and label for each sensor. */ - n_attrs = 1 + 6 * n_sensors; + n_attrs = 6 * n_sensors; hwmon->attrs = kcalloc(n_attrs, sizeof(*hwmon->attrs), GFP_KERNEL); if (!hwmon->attrs) { rc = -ENOMEM; goto fail; } - - hwmon->device = hwmon_device_register(&efx->pci_dev->dev); - if (IS_ERR(hwmon->device)) { - rc = PTR_ERR(hwmon->device); + hwmon->group.attrs = kcalloc(n_attrs + 1, sizeof(struct attribute *), + GFP_KERNEL); + if (!hwmon->group.attrs) { + rc = -ENOMEM; goto fail; } - rc = efx_mcdi_mon_add_attr(efx, "name", efx_mcdi_mon_show_name, 0, 0, 0); - if (rc) - goto fail; - for (i = 0, j = -1, type = -1; ; i++) { enum efx_hwmon_type hwmon_type; const char *hwmon_prefix; @@ -372,7 +357,7 @@ int efx_mcdi_mon_probe(struct efx_nic *efx) page = type / 32; j = -1; if (page == n_pages) - return 0; + goto hwmon_register; MCDI_SET_DWORD(inbuf, SENSOR_INFO_EXT_IN_PAGE, page); @@ -453,28 +438,22 @@ int efx_mcdi_mon_probe(struct efx_nic *efx) if (min1 != max1) { snprintf(name, sizeof(name), "%s%u_input", hwmon_prefix, hwmon_index); - rc = efx_mcdi_mon_add_attr( + efx_mcdi_mon_add_attr( efx, name, efx_mcdi_mon_show_value, i, type, 0); - if (rc) - goto fail; if (hwmon_type != EFX_HWMON_POWER) { snprintf(name, sizeof(name), "%s%u_min", hwmon_prefix, hwmon_index); - rc = efx_mcdi_mon_add_attr( + efx_mcdi_mon_add_attr( efx, name, efx_mcdi_mon_show_limit, i, type, min1); - if (rc) - goto fail; } snprintf(name, sizeof(name), "%s%u_max", hwmon_prefix, hwmon_index); - rc = efx_mcdi_mon_add_attr( + efx_mcdi_mon_add_attr( efx, name, efx_mcdi_mon_show_limit, i, type, max1); - if (rc) - goto fail; if (min2 != max2) { /* Assume max2 is critical value. @@ -482,32 +461,38 @@ int efx_mcdi_mon_probe(struct efx_nic *efx) */ snprintf(name, sizeof(name), "%s%u_crit", hwmon_prefix, hwmon_index); - rc = efx_mcdi_mon_add_attr( + efx_mcdi_mon_add_attr( efx, name, efx_mcdi_mon_show_limit, i, type, max2); - if (rc) - goto fail; } } snprintf(name, sizeof(name), "%s%u_alarm", hwmon_prefix, hwmon_index); - rc = efx_mcdi_mon_add_attr( + efx_mcdi_mon_add_attr( efx, name, efx_mcdi_mon_show_alarm, i, type, 0); - if (rc) - goto fail; if (type < ARRAY_SIZE(efx_mcdi_sensor_type) && efx_mcdi_sensor_type[type].label) { snprintf(name, sizeof(name), "%s%u_label", hwmon_prefix, hwmon_index); - rc = efx_mcdi_mon_add_attr( + efx_mcdi_mon_add_attr( efx, name, efx_mcdi_mon_show_label, i, type, 0); - if (rc) - goto fail; } } +hwmon_register: + hwmon->groups[0] = &hwmon->group; + hwmon->device = hwmon_device_register_with_groups(&efx->pci_dev->dev, + KBUILD_MODNAME, NULL, + hwmon->groups); + if (IS_ERR(hwmon->device)) { + rc = PTR_ERR(hwmon->device); + goto fail; + } + + return 0; + fail: efx_mcdi_mon_remove(efx); return rc; @@ -516,14 +501,11 @@ fail: void efx_mcdi_mon_remove(struct efx_nic *efx) { struct efx_mcdi_mon *hwmon = efx_mcdi_mon(efx); - unsigned int i; - for (i = 0; i < hwmon->n_attrs; i++) - device_remove_file(&efx->pci_dev->dev, - &hwmon->attrs[i].dev_attr); - kfree(hwmon->attrs); if (hwmon->device) hwmon_device_unregister(hwmon->device); + kfree(hwmon->attrs); + kfree(hwmon->group.attrs); efx_nic_free_buffer(efx, &hwmon->dma_buf); } -- cgit v1.2.3 From d3f7d56a7a4671d395e8af87071068a195257bf6 Mon Sep 17 00:00:00 2001 From: Shawn Landden Date: Sun, 24 Nov 2013 22:36:28 -0800 Subject: net: update consumers of MSG_MORE to recognize MSG_SENDPAGE_NOTLAST Commit 35f9c09fe (tcp: tcp_sendpages() should call tcp_push() once) added an internal flag MSG_SENDPAGE_NOTLAST, similar to MSG_MORE. algif_hash, algif_skcipher, and udp used MSG_MORE from tcp_sendpages() and need to see the new flag as identical to MSG_MORE. This fixes sendfile() on AF_ALG. v3: also fix udp Cc: Tom Herbert Cc: Eric Dumazet Cc: David S. Miller Cc: # 3.4.x + 3.2.x Reported-and-tested-by: Shawn Landden Original-patch: Richard Weinberger Signed-off-by: Shawn Landden Signed-off-by: David S. Miller --- crypto/algif_hash.c | 3 +++ crypto/algif_skcipher.c | 3 +++ net/ipv4/udp.c | 3 +++ 3 files changed, 9 insertions(+) diff --git a/crypto/algif_hash.c b/crypto/algif_hash.c index ef5356cd280a..850246206b12 100644 --- a/crypto/algif_hash.c +++ b/crypto/algif_hash.c @@ -114,6 +114,9 @@ static ssize_t hash_sendpage(struct socket *sock, struct page *page, struct hash_ctx *ctx = ask->private; int err; + if (flags & MSG_SENDPAGE_NOTLAST) + flags |= MSG_MORE; + lock_sock(sk); sg_init_table(ctx->sgl.sg, 1); sg_set_page(ctx->sgl.sg, page, size, offset); diff --git a/crypto/algif_skcipher.c b/crypto/algif_skcipher.c index 6a6dfc062d2a..a19c027b29bd 100644 --- a/crypto/algif_skcipher.c +++ b/crypto/algif_skcipher.c @@ -378,6 +378,9 @@ static ssize_t skcipher_sendpage(struct socket *sock, struct page *page, struct skcipher_sg_list *sgl; int err = -EINVAL; + if (flags & MSG_SENDPAGE_NOTLAST) + flags |= MSG_MORE; + lock_sock(sk); if (!ctx->more && ctx->used) goto unlock; diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index 44dfaa09b584..bf2b85b25491 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -1098,6 +1098,9 @@ int udp_sendpage(struct sock *sk, struct page *page, int offset, struct udp_sock *up = udp_sk(sk); int ret; + if (flags & MSG_SENDPAGE_NOTLAST) + flags |= MSG_MORE; + if (!up->pending) { struct msghdr msg = { .msg_flags = flags|MSG_MORE }; -- cgit v1.2.3 From f5e0d34382e18f396d7673a84df8e3342bea7eb6 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Thu, 28 Nov 2013 18:01:38 +0100 Subject: team: fix master carrier set when user linkup is enabled When user linkup is enabled and user sets linkup of individual port, we need to recompute linkup (carrier) of master interface so the change is reflected. Fix this by calling __team_carrier_check() which does the needed work. Please apply to all stable kernels as well. Thanks. Reported-by: Jan Tluka Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/team/team.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c index 34b0de09d881..736050d6b451 100644 --- a/drivers/net/team/team.c +++ b/drivers/net/team/team.c @@ -1366,6 +1366,8 @@ static int team_user_linkup_option_get(struct team *team, return 0; } +static void __team_carrier_check(struct team *team); + static int team_user_linkup_option_set(struct team *team, struct team_gsetter_ctx *ctx) { @@ -1373,6 +1375,7 @@ static int team_user_linkup_option_set(struct team *team, port->user.linkup = ctx->data.bool_val; team_refresh_port_linkup(port); + __team_carrier_check(port->team); return 0; } @@ -1392,6 +1395,7 @@ static int team_user_linkup_en_option_set(struct team *team, port->user.linkup_enabled = ctx->data.bool_val; team_refresh_port_linkup(port); + __team_carrier_check(port->team); return 0; } -- cgit v1.2.3 From f1d8cba61c3c4b1eb88e507249c4cb8d635d9a76 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 28 Nov 2013 09:51:22 -0800 Subject: inet: fix possible seqlock deadlocks In commit c9e9042994d3 ("ipv4: fix possible seqlock deadlock") I left another places where IP_INC_STATS_BH() were improperly used. udp_sendmsg(), ping_v4_sendmsg() and tcp_v4_connect() are called from process context, not from softirq context. This was detected by lockdep seqlock support. Reported-by: jongman heo Fixes: 584bdf8cbdf6 ("[IPV4]: Fix "ipOutNoRoutes" counter error for TCP and UDP") Fixes: c319b4d76b9e ("net: ipv4: add IPPROTO_ICMP socket kind") Signed-off-by: Eric Dumazet Cc: Hannes Frederic Sowa Acked-by: Hannes Frederic Sowa Signed-off-by: David S. Miller --- net/ipv4/ping.c | 2 +- net/ipv4/tcp_ipv4.c | 2 +- net/ipv4/udp.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/net/ipv4/ping.c b/net/ipv4/ping.c index 840cf1b9e6ee..242e7f4ed6f4 100644 --- a/net/ipv4/ping.c +++ b/net/ipv4/ping.c @@ -772,7 +772,7 @@ int ping_v4_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg, err = PTR_ERR(rt); rt = NULL; if (err == -ENETUNREACH) - IP_INC_STATS_BH(net, IPSTATS_MIB_OUTNOROUTES); + IP_INC_STATS(net, IPSTATS_MIB_OUTNOROUTES); goto out; } diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index 59a6f8b90cd9..067213924751 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -177,7 +177,7 @@ int tcp_v4_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len) if (IS_ERR(rt)) { err = PTR_ERR(rt); if (err == -ENETUNREACH) - IP_INC_STATS_BH(sock_net(sk), IPSTATS_MIB_OUTNOROUTES); + IP_INC_STATS(sock_net(sk), IPSTATS_MIB_OUTNOROUTES); return err; } diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index bf2b85b25491..44f6a20fa29d 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -999,7 +999,7 @@ int udp_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg, err = PTR_ERR(rt); rt = NULL; if (err == -ENETUNREACH) - IP_INC_STATS_BH(net, IPSTATS_MIB_OUTNOROUTES); + IP_INC_STATS(net, IPSTATS_MIB_OUTNOROUTES); goto out; } -- cgit v1.2.3 From af91706d5ddecb4a9858cca9e90d463037cfd498 Mon Sep 17 00:00:00 2001 From: Roberto Sassu Date: Wed, 27 Nov 2013 14:40:41 +0100 Subject: ima: store address of template_fmt_copy in a pointer before calling strsep This patch stores the address of the 'template_fmt_copy' variable in a new variable, called 'template_fmt_ptr', so that the latter is passed as an argument of strsep() instead of the former. This modification is needed in order to correctly free the memory area referenced by 'template_fmt_copy' (strsep() modifies the pointer of the passed string). Signed-off-by: Roberto Sassu Reported-by: Sebastian Ott Signed-off-by: Mimi Zohar Signed-off-by: James Morris --- security/integrity/ima/ima_template.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/security/integrity/ima/ima_template.c b/security/integrity/ima/ima_template.c index 913e1927f916..635695f6a185 100644 --- a/security/integrity/ima/ima_template.c +++ b/security/integrity/ima/ima_template.c @@ -110,7 +110,7 @@ static int template_desc_init_fields(const char *template_fmt, struct ima_template_field ***fields, int *num_fields) { - char *c, *template_fmt_copy; + char *c, *template_fmt_copy, *template_fmt_ptr; int template_num_fields = template_fmt_size(template_fmt); int i, result = 0; @@ -127,7 +127,9 @@ static int template_desc_init_fields(const char *template_fmt, result = -ENOMEM; goto out; } - for (i = 0; (c = strsep(&template_fmt_copy, "|")) != NULL && + + template_fmt_ptr = template_fmt_copy; + for (i = 0; (c = strsep(&template_fmt_ptr, "|")) != NULL && i < template_num_fields; i++) { struct ima_template_field *f = lookup_template_field(c); -- cgit v1.2.3 From 42ce4126d8bc2e128e1f207cf79bb0623fac498f Mon Sep 17 00:00:00 2001 From: Akeem G Abodunrin Date: Fri, 8 Nov 2013 01:54:07 +0000 Subject: igb: Fixed Wake On LAN support This patch fixes Wake on LAN being reported as supported on some Ethernet ports, in contrary to Hardware capability. Signed-off-by: Akeem G Abodunrin Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/igb/igb_ethtool.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c index b0f3666b1d7f..c3143da497c8 100644 --- a/drivers/net/ethernet/intel/igb/igb_ethtool.c +++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c @@ -2062,14 +2062,15 @@ static void igb_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) { struct igb_adapter *adapter = netdev_priv(netdev); - wol->supported = WAKE_UCAST | WAKE_MCAST | - WAKE_BCAST | WAKE_MAGIC | - WAKE_PHY; wol->wolopts = 0; if (!(adapter->flags & IGB_FLAG_WOL_SUPPORTED)) return; + wol->supported = WAKE_UCAST | WAKE_MCAST | + WAKE_BCAST | WAKE_MAGIC | + WAKE_PHY; + /* apply any specific unsupported masks here */ switch (adapter->hw.device_id) { default: -- cgit v1.2.3 From 6a7d64e3e09e11181a07a2e8cd6af5d6355133be Mon Sep 17 00:00:00 2001 From: yzhu1 Date: Sat, 23 Nov 2013 07:07:40 +0000 Subject: e1000: prevent oops when adapter is being closed and reset simultaneously This change is based on a similar change made to e1000e support in commit bb9e44d0d0f4 ("e1000e: prevent oops when adapter is being closed and reset simultaneously"). The same issue has also been observed on the older e1000 cards. Here, we have increased the RESET_COUNT value to 50 because there are too many accesses to e1000 nic on stress tests to e1000 nic, it is not enough to set RESET_COUT 25. Experimentation has shown that it is enough to set RESET_COUNT 50. Signed-off-by: yzhu1 Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000/e1000.h | 5 +++++ drivers/net/ethernet/intel/e1000/e1000_main.c | 9 +++++++++ 2 files changed, 14 insertions(+) diff --git a/drivers/net/ethernet/intel/e1000/e1000.h b/drivers/net/ethernet/intel/e1000/e1000.h index 58c147271a36..e4093d1f64cb 100644 --- a/drivers/net/ethernet/intel/e1000/e1000.h +++ b/drivers/net/ethernet/intel/e1000/e1000.h @@ -83,6 +83,11 @@ struct e1000_adapter; #define E1000_MAX_INTR 10 +/* + * Count for polling __E1000_RESET condition every 10-20msec. + */ +#define E1000_CHECK_RESET_COUNT 50 + /* TX/RX descriptor defines */ #define E1000_DEFAULT_TXD 256 #define E1000_MAX_TXD 256 diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c index e38622825fa7..c0f52174e4c8 100644 --- a/drivers/net/ethernet/intel/e1000/e1000_main.c +++ b/drivers/net/ethernet/intel/e1000/e1000_main.c @@ -1440,6 +1440,10 @@ static int e1000_close(struct net_device *netdev) { struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; + int count = E1000_CHECK_RESET_COUNT; + + while (test_bit(__E1000_RESETTING, &adapter->flags) && count--) + usleep_range(10000, 20000); WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags)); e1000_down(adapter); @@ -4963,6 +4967,11 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake) netif_device_detach(netdev); if (netif_running(netdev)) { + int count = E1000_CHECK_RESET_COUNT; + + while (test_bit(__E1000_RESETTING, &adapter->flags) && count--) + usleep_range(10000, 20000); + WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags)); e1000_down(adapter); } -- cgit v1.2.3 From b2f963bfaebadc9117b29f806630ea3bcaec403d Mon Sep 17 00:00:00 2001 From: Vladimir Davydov Date: Sat, 23 Nov 2013 07:17:56 +0000 Subject: e1000: fix lockdep warning in e1000_reset_task The patch fixes the following lockdep warning, which is 100% reproducible on network restart: ====================================================== [ INFO: possible circular locking dependency detected ] 3.12.0+ #47 Tainted: GF ------------------------------------------------------- kworker/1:1/27 is trying to acquire lock: ((&(&adapter->watchdog_task)->work)){+.+...}, at: [] flush_work+0x0/0x70 but task is already holding lock: (&adapter->mutex){+.+...}, at: [] e1000_reset_task+0x4a/0xa0 [e1000] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&adapter->mutex){+.+...}: [] lock_acquire+0x9d/0x120 [] mutex_lock_nested+0x4c/0x390 [] e1000_watchdog+0x7d/0x5b0 [e1000] [] process_one_work+0x1d2/0x510 [] worker_thread+0x120/0x3a0 [] kthread+0xee/0x110 [] ret_from_fork+0x7c/0xb0 -> #0 ((&(&adapter->watchdog_task)->work)){+.+...}: [] __lock_acquire+0x1710/0x1810 [] lock_acquire+0x9d/0x120 [] flush_work+0x3b/0x70 [] __cancel_work_timer+0x98/0x140 [] cancel_delayed_work_sync+0x13/0x20 [] e1000_down_and_stop+0x3c/0x60 [e1000] [] e1000_down+0x131/0x220 [e1000] [] e1000_reset_task+0x52/0xa0 [e1000] [] process_one_work+0x1d2/0x510 [] worker_thread+0x120/0x3a0 [] kthread+0xee/0x110 [] ret_from_fork+0x7c/0xb0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&adapter->mutex); lock((&(&adapter->watchdog_task)->work)); lock(&adapter->mutex); lock((&(&adapter->watchdog_task)->work)); *** DEADLOCK *** 3 locks held by kworker/1:1/27: #0: (events){.+.+.+}, at: [] process_one_work+0x166/0x510 #1: ((&adapter->reset_task)){+.+...}, at: [] process_one_work+0x166/0x510 #2: (&adapter->mutex){+.+...}, at: [] e1000_reset_task+0x4a/0xa0 [e1000] stack backtrace: CPU: 1 PID: 27 Comm: kworker/1:1 Tainted: GF 3.12.0+ #47 Hardware name: System manufacturer System Product Name/P5B-VM SE, BIOS 0501 05/31/2007 Workqueue: events e1000_reset_task [e1000] ffffffff820f6000 ffff88007b9dba98 ffffffff816b54a2 0000000000000002 ffffffff820f5e50 ffff88007b9dbae8 ffffffff810ba936 ffff88007b9dbac8 ffff88007b9dbb48 ffff88007b9d8f00 ffff88007b9d8780 ffff88007b9d8f00 Call Trace: [] dump_stack+0x49/0x5f [] print_circular_bug+0x216/0x310 [] __lock_acquire+0x1710/0x1810 [] ? __flush_work+0x250/0x250 [] lock_acquire+0x9d/0x120 [] ? __flush_work+0x250/0x250 [] flush_work+0x3b/0x70 [] ? __flush_work+0x250/0x250 [] __cancel_work_timer+0x98/0x140 [] cancel_delayed_work_sync+0x13/0x20 [] e1000_down_and_stop+0x3c/0x60 [e1000] [] e1000_down+0x131/0x220 [e1000] [] e1000_reset_task+0x52/0xa0 [e1000] [] process_one_work+0x1d2/0x510 [] ? process_one_work+0x166/0x510 [] worker_thread+0x120/0x3a0 [] ? manage_workers+0x2c0/0x2c0 [] kthread+0xee/0x110 [] ? __init_kthread_worker+0x70/0x70 [] ret_from_fork+0x7c/0xb0 [] ? __init_kthread_worker+0x70/0x70 == The issue background == The problem occurs, because e1000_down(), which is called under adapter->mutex by e1000_reset_task(), tries to synchronously cancel e1000 auxiliary works (reset_task, watchdog_task, phy_info_task, fifo_stall_task), which take adapter->mutex in their handlers. So the question is what does adapter->mutex protect there? The adapter->mutex was introduced by commit 0ef4ee ("e1000: convert to private mutex from rtnl") as a replacement for rtnl_lock() taken in the asynchronous handlers. It targeted on fixing a similar lockdep warning issued when e1000_down() was called under rtnl_lock(), and it fixed it, but unfortunately it introduced the lockdep warning described above. Anyway, that said the source of this bug is that the asynchronous works were made to take rtnl_lock() some time ago, so let's look deeper and find why it was added there. The rtnl_lock() was added to asynchronous handlers by commit 338c15 ("e1000: fix occasional panic on unload") in order to prevent asynchronous handlers from execution after the module is unloaded (e1000_down() is called) as it follows from the comment to the commit: > Net drivers in general have an issue where timers fired > by mod_timer or work threads with schedule_work are running > outside of the rtnl_lock. > > With no other lock protection these routines are vulnerable > to races with driver unload or reset paths. > > The longer term solution to this might be a redesign with > safer locks being taken in the driver to guarantee no > reentrance, but for now a safe and effective fix is > to take the rtnl_lock in these routines. I'm not sure if this locking scheme fixed the problem or just made it unlikely, although I incline to the latter. Anyway, this was long time ago when e1000 auxiliary works were implemented as timers scheduling real work handlers in their routines. The e1000_down() function only canceled the timers, but left the real handlers running if they were running, which could result in work execution after module unload. Today, the e1000 driver uses sane delayed works instead of the pair timer+work to implement its delayed asynchronous handlers, and the e1000_down() synchronously cancels all the works so that the problem that commit 338c15 tried to cope with disappeared, and we don't need any locks in the handlers any more. Moreover, any locking there can potentially result in a deadlock. So, this patch reverts commits 0ef4ee and 338c15. Fixes: 0ef4eedc2e98 ("e1000: convert to private mutex from rtnl") Fixes: 338c15e470d8 ("e1000: fix occasional panic on unload") Cc: Tushar Dave Cc: Patrick McHardy Signed-off-by: Vladimir Davydov Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000/e1000.h | 2 -- drivers/net/ethernet/intel/e1000/e1000_main.c | 36 +++------------------------ 2 files changed, 3 insertions(+), 35 deletions(-) diff --git a/drivers/net/ethernet/intel/e1000/e1000.h b/drivers/net/ethernet/intel/e1000/e1000.h index e4093d1f64cb..f9313b36c887 100644 --- a/drivers/net/ethernet/intel/e1000/e1000.h +++ b/drivers/net/ethernet/intel/e1000/e1000.h @@ -317,8 +317,6 @@ struct e1000_adapter { struct delayed_work watchdog_task; struct delayed_work fifo_stall_task; struct delayed_work phy_info_task; - - struct mutex mutex; }; enum e1000_state_t { diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c index c0f52174e4c8..619b0cb60f2f 100644 --- a/drivers/net/ethernet/intel/e1000/e1000_main.c +++ b/drivers/net/ethernet/intel/e1000/e1000_main.c @@ -544,21 +544,8 @@ void e1000_down(struct e1000_adapter *adapter) e1000_clean_all_rx_rings(adapter); } -static void e1000_reinit_safe(struct e1000_adapter *adapter) -{ - while (test_and_set_bit(__E1000_RESETTING, &adapter->flags)) - msleep(1); - mutex_lock(&adapter->mutex); - e1000_down(adapter); - e1000_up(adapter); - mutex_unlock(&adapter->mutex); - clear_bit(__E1000_RESETTING, &adapter->flags); -} - void e1000_reinit_locked(struct e1000_adapter *adapter) { - /* if rtnl_lock is not held the call path is bogus */ - ASSERT_RTNL(); WARN_ON(in_interrupt()); while (test_and_set_bit(__E1000_RESETTING, &adapter->flags)) msleep(1); @@ -1316,7 +1303,6 @@ static int e1000_sw_init(struct e1000_adapter *adapter) e1000_irq_disable(adapter); spin_lock_init(&adapter->stats_lock); - mutex_init(&adapter->mutex); set_bit(__E1000_DOWN, &adapter->flags); @@ -2329,11 +2315,8 @@ static void e1000_update_phy_info_task(struct work_struct *work) struct e1000_adapter *adapter = container_of(work, struct e1000_adapter, phy_info_task.work); - if (test_bit(__E1000_DOWN, &adapter->flags)) - return; - mutex_lock(&adapter->mutex); + e1000_phy_get_info(&adapter->hw, &adapter->phy_info); - mutex_unlock(&adapter->mutex); } /** @@ -2349,9 +2332,6 @@ static void e1000_82547_tx_fifo_stall_task(struct work_struct *work) struct net_device *netdev = adapter->netdev; u32 tctl; - if (test_bit(__E1000_DOWN, &adapter->flags)) - return; - mutex_lock(&adapter->mutex); if (atomic_read(&adapter->tx_fifo_stall)) { if ((er32(TDT) == er32(TDH)) && (er32(TDFT) == er32(TDFH)) && @@ -2372,7 +2352,6 @@ static void e1000_82547_tx_fifo_stall_task(struct work_struct *work) schedule_delayed_work(&adapter->fifo_stall_task, 1); } } - mutex_unlock(&adapter->mutex); } bool e1000_has_link(struct e1000_adapter *adapter) @@ -2426,10 +2405,6 @@ static void e1000_watchdog(struct work_struct *work) struct e1000_tx_ring *txdr = adapter->tx_ring; u32 link, tctl; - if (test_bit(__E1000_DOWN, &adapter->flags)) - return; - - mutex_lock(&adapter->mutex); link = e1000_has_link(adapter); if ((netif_carrier_ok(netdev)) && link) goto link_up; @@ -2520,7 +2495,7 @@ link_up: adapter->tx_timeout_count++; schedule_work(&adapter->reset_task); /* exit immediately since reset is imminent */ - goto unlock; + return; } } @@ -2548,9 +2523,6 @@ link_up: /* Reschedule the task */ if (!test_bit(__E1000_DOWN, &adapter->flags)) schedule_delayed_work(&adapter->watchdog_task, 2 * HZ); - -unlock: - mutex_unlock(&adapter->mutex); } enum latency_range { @@ -3499,10 +3471,8 @@ static void e1000_reset_task(struct work_struct *work) struct e1000_adapter *adapter = container_of(work, struct e1000_adapter, reset_task); - if (test_bit(__E1000_DOWN, &adapter->flags)) - return; e_err(drv, "Reset adapter\n"); - e1000_reinit_safe(adapter); + e1000_reinit_locked(adapter); } /** -- cgit v1.2.3 From 74a1b1ea8a30b035aaad833bbd6b9263e72acfac Mon Sep 17 00:00:00 2001 From: Vladimir Davydov Date: Sat, 23 Nov 2013 07:18:01 +0000 Subject: e1000: fix possible reset_task running after adapter down On e1000_down(), we should ensure every asynchronous work is canceled before proceeding. Since the watchdog_task can schedule other works apart from itself, it should be stopped first, but currently it is stopped after the reset_task. This can result in the following race leading to the reset_task running after the module unload: e1000_down_and_stop(): e1000_watchdog(): ---------------------- ----------------- cancel_work_sync(reset_task) schedule_work(reset_task) cancel_delayed_work_sync(watchdog_task) The patch moves cancel_delayed_work_sync(watchdog_task) at the beginning of e1000_down_and_stop() thus ensuring the race is impossible. Cc: Tushar Dave Cc: Patrick McHardy Signed-off-by: Vladimir Davydov Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000/e1000_main.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c index 619b0cb60f2f..46e6544ed1b7 100644 --- a/drivers/net/ethernet/intel/e1000/e1000_main.c +++ b/drivers/net/ethernet/intel/e1000/e1000_main.c @@ -494,13 +494,20 @@ static void e1000_down_and_stop(struct e1000_adapter *adapter) { set_bit(__E1000_DOWN, &adapter->flags); - /* Only kill reset task if adapter is not resetting */ - if (!test_bit(__E1000_RESETTING, &adapter->flags)) - cancel_work_sync(&adapter->reset_task); - cancel_delayed_work_sync(&adapter->watchdog_task); + + /* + * Since the watchdog task can reschedule other tasks, we should cancel + * it first, otherwise we can run into the situation when a work is + * still running after the adapter has been turned down. + */ + cancel_delayed_work_sync(&adapter->phy_info_task); cancel_delayed_work_sync(&adapter->fifo_stall_task); + + /* Only kill reset task if adapter is not resetting */ + if (!test_bit(__E1000_RESETTING, &adapter->flags)) + cancel_work_sync(&adapter->reset_task); } void e1000_down(struct e1000_adapter *adapter) -- cgit v1.2.3 From ae72c8d068b3440c0b45df284303794cfbc0f4f2 Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Sat, 9 Nov 2013 07:11:26 +0000 Subject: ixgbe: ixgbe_fwd_ring_down needs to be static When compiling with -Wstrict-prototypes gcc catches a static I missed. ./ixgbe_main.c:4254: warning: no previous prototype for 'ixgbe_fwd_ring_down' Reported-by: Phillip Schmitt Signed-off-by: John Fastabend Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 0c55079ebee3..ad9d67095d52 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -4251,8 +4251,8 @@ static void ixgbe_disable_fwd_ring(struct ixgbe_fwd_adapter *vadapter, rx_ring->l2_accel_priv = NULL; } -int ixgbe_fwd_ring_down(struct net_device *vdev, - struct ixgbe_fwd_adapter *accel) +static int ixgbe_fwd_ring_down(struct net_device *vdev, + struct ixgbe_fwd_adapter *accel) { struct ixgbe_adapter *adapter = accel->real_adapter; unsigned int rxbase = accel->rx_base_queue; -- cgit v1.2.3 From 8bf1264d2f12c6fa8645d097275568c1b62c246c Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Tue, 12 Nov 2013 12:13:29 +0000 Subject: ixgbe: turn NETIF_F_HW_L2FW_DOFFLOAD off by default NETIF_F_HW_L2FW_DOFFLOAD allows upper layer net devices such as macvlan to use queues in the hardware to directly submit and receive skbs. This creates a subtle change in the datapath though. One change being the skb may no longer use the root devices qdisc. Because users may not expect this we can't enable the feature by default unless the hardware can offload all the software functionality above it. So for now disable it by default and let users opt in. Signed-off-by: John Fastabend Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index ad9d67095d52..cc06854296a3 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -7986,10 +7986,9 @@ skip_sriov: NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_RXHASH | - NETIF_F_RXCSUM | - NETIF_F_HW_L2FW_DOFFLOAD; + NETIF_F_RXCSUM; - netdev->hw_features = netdev->features; + netdev->hw_features = netdev->features | NETIF_F_HW_L2FW_DOFFLOAD; switch (adapter->hw.mac.type) { case ixgbe_mac_82599EB: -- cgit v1.2.3 From 8821754704a661623083a9dedf425114199600ba Mon Sep 17 00:00:00 2001 From: Mark Rustad Date: Sat, 23 Nov 2013 03:19:19 +0000 Subject: ixgbe: Make ixgbe_identify_qsfp_module_generic static Correct a namespace complaint by making the function static and moving the prototype into the .c file. Signed-off-by: Mark Rustad Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c | 3 ++- drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h | 1 - 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c index e4c676006be9..39217e5ff7dc 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c @@ -46,6 +46,7 @@ static bool ixgbe_get_i2c_data(u32 *i2cctl); static void ixgbe_i2c_bus_clear(struct ixgbe_hw *hw); static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id); static s32 ixgbe_get_phy_id(struct ixgbe_hw *hw); +static s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw); /** * ixgbe_identify_phy_generic - Get physical layer module @@ -1164,7 +1165,7 @@ err_read_i2c_eeprom: * * Searches for and identifies the QSFP module and assigns appropriate PHY type **/ -s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw) +static s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw) { struct ixgbe_adapter *adapter = hw->back; s32 status = IXGBE_ERR_PHY_ADDR_INVALID; diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h index aae900a256da..fffcbdd2bf0e 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h @@ -145,7 +145,6 @@ s32 ixgbe_get_phy_firmware_version_generic(struct ixgbe_hw *hw, s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw); s32 ixgbe_identify_module_generic(struct ixgbe_hw *hw); s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw); -s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw); s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw, u16 *list_offset, u16 *data_offset); -- cgit v1.2.3 From 11a5aa32562e1e90ab2d0278748fe0fbecda1cbe Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 25 Nov 2013 21:52:25 +0000 Subject: ARM: dma-mapping: check DMA mask against available memory Some buses have negative offsets, which causes the DMA mask checks to falsely fail. Fix this by using the actual amount of memory fitted in the system. Signed-off-by: Russell King --- arch/arm/mm/dma-mapping.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 79f8b39801a8..f6b6bfa88ecf 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -9,6 +9,7 @@ * * DMA uncached mapping support. */ +#include #include #include #include @@ -162,6 +163,8 @@ static u64 get_coherent_dma_mask(struct device *dev) u64 mask = (u64)DMA_BIT_MASK(32); if (dev) { + unsigned long max_dma_pfn; + mask = dev->coherent_dma_mask; /* @@ -173,6 +176,8 @@ static u64 get_coherent_dma_mask(struct device *dev) return 0; } + max_dma_pfn = min(max_pfn, arm_dma_pfn_limit); + /* * If the mask allows for more memory than we can address, * and we actually have that much memory, then fail the @@ -180,7 +185,7 @@ static u64 get_coherent_dma_mask(struct device *dev) */ if (sizeof(mask) != sizeof(dma_addr_t) && mask > (dma_addr_t)~0 && - dma_to_pfn(dev, ~0) > arm_dma_pfn_limit) { + dma_to_pfn(dev, ~0) > max_dma_pfn) { dev_warn(dev, "Coherent DMA mask %#llx is larger than dma_addr_t allows\n", mask); dev_warn(dev, "Driver did not use or check the return value from dma_set_coherent_mask()?\n"); @@ -192,7 +197,7 @@ static u64 get_coherent_dma_mask(struct device *dev) * fits within the allowable addresses which we can * allocate. */ - if (dma_to_pfn(dev, mask) < arm_dma_pfn_limit) { + if (dma_to_pfn(dev, mask) < max_dma_pfn) { dev_warn(dev, "Coherent DMA mask %#llx (pfn %#lx-%#lx) covers a smaller range of system memory than the DMA zone pfn 0x0-%#lx\n", mask, dma_to_pfn(dev, 0), dma_to_pfn(dev, mask) + 1, -- cgit v1.2.3 From d8aa712c30148ba26fd89a5dc14de95d4c375184 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 28 Nov 2013 21:43:40 +0000 Subject: ARM: fix booting low-vectors machines Commit f6f91b0d9fd9 (ARM: allow kuser helpers to be removed from the vector page) required two pages for the vectors code. Although the code setting up the initial page tables was updated, the code which allocates page tables for new processes wasn't, neither was the code which tears down the mappings. Fix this. Fixes: f6f91b0d9fd9 ("ARM: allow kuser helpers to be removed from the vector page") Signed-off-by: Russell King Cc: --- arch/arm/include/asm/pgtable.h | 2 +- arch/arm/mm/mmap.c | 2 +- arch/arm/mm/pgd.c | 3 ++- 3 files changed, 4 insertions(+), 3 deletions(-) diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index be956dbf6bae..1571d126e9dd 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -61,7 +61,7 @@ extern void __pgd_error(const char *file, int line, pgd_t); * mapping to be mapped at. This is particularly important for * non-high vector CPUs. */ -#define FIRST_USER_ADDRESS PAGE_SIZE +#define FIRST_USER_ADDRESS (PAGE_SIZE * 2) /* * Use TASK_SIZE as the ceiling argument for free_pgtables() and diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c index d27158c38eb0..5e85ed371364 100644 --- a/arch/arm/mm/mmap.c +++ b/arch/arm/mm/mmap.c @@ -146,7 +146,7 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0, info.flags = VM_UNMAPPED_AREA_TOPDOWN; info.length = len; - info.low_limit = PAGE_SIZE; + info.low_limit = FIRST_USER_ADDRESS; info.high_limit = mm->mmap_base; info.align_mask = do_align ? (PAGE_MASK & (SHMLBA - 1)) : 0; info.align_offset = pgoff << PAGE_SHIFT; diff --git a/arch/arm/mm/pgd.c b/arch/arm/mm/pgd.c index 0acb089d0f70..1046b373d1ae 100644 --- a/arch/arm/mm/pgd.c +++ b/arch/arm/mm/pgd.c @@ -87,7 +87,8 @@ pgd_t *pgd_alloc(struct mm_struct *mm) init_pud = pud_offset(init_pgd, 0); init_pmd = pmd_offset(init_pud, 0); init_pte = pte_offset_map(init_pmd, 0); - set_pte_ext(new_pte, *init_pte, 0); + set_pte_ext(new_pte + 0, init_pte[0], 0); + set_pte_ext(new_pte + 1, init_pte[1], 0); pte_unmap(init_pte); pte_unmap(new_pte); } -- cgit v1.2.3 From 43659222e7a0113912ed02f6b2231550b3e471ac Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 28 Nov 2013 21:55:41 +0000 Subject: ARM: footbridge: fix VGA initialisation It's no good setting vga_base after the VGA console has been initialised, because if we do that we get this: Unable to handle kernel paging request at virtual address 000b8000 pgd = c0004000 [000b8000] *pgd=07ffc831, *pte=00000000, *ppte=00000000 0Internal error: Oops: 5017 [#1] ARM Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 3.12.0+ #49 task: c03e2974 ti: c03d8000 task.ti: c03d8000 PC is at vgacon_startup+0x258/0x39c LR is at request_resource+0x10/0x1c pc : [] lr : [] psr: 60000053 sp : c03d9f68 ip : 000b8000 fp : c03d9f8c r10: 000055aa r9 : 4401a103 r8 : ffffaa55 r7 : c03e357c r6 : c051b460 r5 : 000000ff r4 : 000c0000 r3 : 000b8000 r2 : c03e0514 r1 : 00000000 r0 : c0304971 Flags: nZCv IRQs on FIQs off Mode SVC_32 ISA ARM Segment kernel which is an access to the 0xb8000 without the PCI offset required to make it work. Fixes: cc22b4c18540 ("ARM: set vga memory base at run-time") Signed-off-by: Russell King Cc: --- arch/arm/mach-footbridge/common.c | 3 +++ arch/arm/mach-footbridge/dc21285.c | 2 -- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c index 2739ca2c1334..e0091685fd48 100644 --- a/arch/arm/mach-footbridge/common.c +++ b/arch/arm/mach-footbridge/common.c @@ -15,6 +15,7 @@ #include #include #include +#include