From d181a6171ec84a6139dd11d3dd546748c640dcaa Mon Sep 17 00:00:00 2001 From: Domenico Andreoli Date: Mon, 14 Mar 2011 03:46:53 +0000 Subject: CS89x0: Finish transition to CS89x0_NONISA_IRQ CS89x0_NONISA_IRQ is selected by all those non-ISA boards which use CS89x0. This patch only cleans the last bits left after its introduction. Signed-off-by: Domenico Andreoli Signed-off-by: David S. Miller --- drivers/net/cs89x0.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c index d325e01a53e0..e6ac755ff5ce 100644 --- a/drivers/net/cs89x0.c +++ b/drivers/net/cs89x0.c @@ -943,10 +943,10 @@ skip_this_frame: static void __init reset_chip(struct net_device *dev) { #if !defined(CONFIG_MACH_MX31ADS) -#if !defined(CONFIG_MACH_IXDP2351) && !defined(CONFIG_ARCH_IXDP2X01) +#if !defined(CS89x0_NONISA_IRQ) struct net_local *lp = netdev_priv(dev); int ioaddr = dev->base_addr; -#endif +#endif /* CS89x0_NONISA_IRQ */ int reset_start_time; writereg(dev, PP_SelfCTL, readreg(dev, PP_SelfCTL) | POWER_ON_RESET); @@ -954,7 +954,7 @@ static void __init reset_chip(struct net_device *dev) /* wait 30 ms */ msleep(30); -#if !defined(CONFIG_MACH_IXDP2351) && !defined(CONFIG_ARCH_IXDP2X01) +#if !defined(CS89x0_NONISA_IRQ) if (lp->chip_type != CS8900) { /* Hardware problem requires PNP registers to be reconfigured after a reset */ writeword(ioaddr, ADD_PORT, PP_CS8920_ISAINT); @@ -965,7 +965,7 @@ static void __init reset_chip(struct net_device *dev) outb((dev->mem_start >> 16) & 0xff, ioaddr + DATA_PORT); outb((dev->mem_start >> 8) & 0xff, ioaddr + DATA_PORT + 1); } -#endif /* IXDP2x01 */ +#endif /* CS89x0_NONISA_IRQ */ /* Wait until the chip is reset */ reset_start_time = jiffies; -- cgit v1.2.3