From df37c99815d9e0775e67276d70c93cbc25f31c70 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 13 Feb 2022 14:05:23 +0100 Subject: phy: ti: tusb1210: Add a delay between power-on and restoring the phy-parameters Now that we actually log errors on ulpi_write failures it becomes clear that the ulpi_write() restoring the phy-parameters on power-on is failing after a suspend/resume add a short delay after driving the cs line high to fix this. Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20220213130524.18748-9-hdegoede@redhat.com Signed-off-by: Vinod Koul --- drivers/phy/ti/phy-tusb1210.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/phy/ti/phy-tusb1210.c b/drivers/phy/ti/phy-tusb1210.c index 04baed24469f..9ef4c5f79b75 100644 --- a/drivers/phy/ti/phy-tusb1210.c +++ b/drivers/phy/ti/phy-tusb1210.c @@ -8,6 +8,7 @@ */ #include #include +#include #include #include #include @@ -18,6 +19,8 @@ #define TUSB1210_VENDOR_SPECIFIC2_ZHSDRV_MASK GENMASK(5, 4) #define TUSB1210_VENDOR_SPECIFIC2_DP_MASK BIT(6) +#define TUSB1210_RESET_TIME_MS 30 + struct tusb1210 { struct ulpi *ulpi; struct phy *phy; @@ -60,6 +63,8 @@ static int tusb1210_power_on(struct phy *phy) gpiod_set_value_cansleep(tusb->gpio_reset, 1); gpiod_set_value_cansleep(tusb->gpio_cs, 1); + msleep(TUSB1210_RESET_TIME_MS); + /* Restore the optional eye diagram optimization value */ return tusb1210_ulpi_write(tusb, TUSB1210_VENDOR_SPECIFIC2, tusb->vendor_specific2); -- cgit v1.2.3