From 99a0378de9f887fd4d501f1baa50aaf16d01a8e8 Mon Sep 17 00:00:00 2001 From: Vivien Didelot Date: Tue, 12 Apr 2011 15:34:36 -0400 Subject: hwmon: (sht15) general code clean-up * Add a documentation file for the device. * Respect a bit more the kernel-doc syntax. * Rename some variables for clarity. * Use bool type for flags. * Use an enum for states (actions being done). Signed-off-by: Vivien Didelot Acked-by: Jonathan Cameron Signed-off-by: Guenter Roeck --- Documentation/hwmon/sht15 | 42 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) create mode 100644 Documentation/hwmon/sht15 (limited to 'Documentation/hwmon/sht15') diff --git a/Documentation/hwmon/sht15 b/Documentation/hwmon/sht15 new file mode 100644 index 000000000000..2919c516fdbc --- /dev/null +++ b/Documentation/hwmon/sht15 @@ -0,0 +1,42 @@ +Kernel driver sht15 +=================== + +Authors: + * Wouter Horre + * Jonathan Cameron + +Supported chips: + * Sensirion SHT10 + Prefix: 'sht10' + + * Sensirion SHT11 + Prefix: 'sht11' + + * Sensirion SHT15 + Prefix: 'sht15' + + * Sensirion SHT71 + Prefix: 'sht71' + + * Sensirion SHT75 + Prefix: 'sht75' + +Datasheet: Publicly available at the Sensirion website +http://www.sensirion.ch/en/pdf/product_information/Datasheet-humidity-sensor-SHT1x.pdf + +Description +----------- + +The SHT10, SHT11, SHT15, SHT71, and SHT75 are humidity and temperature +sensors. + +The devices communicate using two GPIO lines and use the default +resolution settings of 14 bits for temperature and 12 bits for humidity. + +Note: The regulator supply name is set to "vcc". + +Sysfs interface +--------------- + +* temp1_input: temperature input +* humidity1_input: humidity input -- cgit v1.2.3