From bb02859cd3448f31e00c47c1277e27be0cee7d2a Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 10 Nov 2016 17:33:12 +0100 Subject: ALSA: doc: ReSTize serial-u16550.txt Yet another simple conversion from a plain text file. Put to cards directory. Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/serial-u16550.txt | 88 --------------------------- Documentation/sound/cards/index.rst | 1 + Documentation/sound/cards/serial-u16550.rst | 93 +++++++++++++++++++++++++++++ 3 files changed, 94 insertions(+), 88 deletions(-) delete mode 100644 Documentation/sound/alsa/serial-u16550.txt create mode 100644 Documentation/sound/cards/serial-u16550.rst (limited to 'Documentation/sound') diff --git a/Documentation/sound/alsa/serial-u16550.txt b/Documentation/sound/alsa/serial-u16550.txt deleted file mode 100644 index c1919559d509..000000000000 --- a/Documentation/sound/alsa/serial-u16550.txt +++ /dev/null @@ -1,88 +0,0 @@ - - Serial UART 16450/16550 MIDI driver - =================================== - -The adaptor module parameter allows you to select either: - - 0 - Roland Soundcanvas support (default) - 1 - Midiator MS-124T support (1) - 2 - Midiator MS-124W S/A mode (2) - 3 - MS-124W M/B mode support (3) - 4 - Generic device with multiple input support (4) - -For the Midiator MS-124W, you must set the physical M-S and A-B -switches on the Midiator to match the driver mode you select. - -In Roland Soundcanvas mode, multiple ALSA raw MIDI substreams are supported -(midiCnD0-midiCnD15). Whenever you write to a different substream, the driver -sends the nonstandard MIDI command sequence F5 NN, where NN is the substream -number plus 1. Roland modules use this command to switch between different -"parts", so this feature lets you treat each part as a distinct raw MIDI -substream. The driver provides no way to send F5 00 (no selection) or to not -send the F5 NN command sequence at all; perhaps it ought to. - -Usage example for simple serial converter: - - /sbin/setserial /dev/ttyS0 uart none - /sbin/modprobe snd-serial-u16550 port=0x3f8 irq=4 speed=115200 - -Usage example for Roland SoundCanvas with 4 MIDI ports: - - /sbin/setserial /dev/ttyS0 uart none - /sbin/modprobe snd-serial-u16550 port=0x3f8 irq=4 outs=4 - -In MS-124T mode, one raw MIDI substream is supported (midiCnD0); the outs -module parameter is automatically set to 1. The driver sends the same data to -all four MIDI Out connectors. Set the A-B switch and the speed module -parameter to match (A=19200, B=9600). - -Usage example for MS-124T, with A-B switch in A position: - - /sbin/setserial /dev/ttyS0 uart none - /sbin/modprobe snd-serial-u16550 port=0x3f8 irq=4 adaptor=1 \ - speed=19200 - -In MS-124W S/A mode, one raw MIDI substream is supported (midiCnD0); -the outs module parameter is automatically set to 1. The driver sends -the same data to all four MIDI Out connectors at full MIDI speed. - -Usage example for S/A mode: - - /sbin/setserial /dev/ttyS0 uart none - /sbin/modprobe snd-serial-u16550 port=0x3f8 irq=4 adaptor=2 - -In MS-124W M/B mode, the driver supports 16 ALSA raw MIDI substreams; -the outs module parameter is automatically set to 16. The substream -number gives a bitmask of which MIDI Out connectors the data should be -sent to, with midiCnD1 sending to Out 1, midiCnD2 to Out 2, midiCnD4 to -Out 3, and midiCnD8 to Out 4. Thus midiCnD15 sends the data to all 4 ports. -As a special case, midiCnD0 also sends to all ports, since it is not useful -to send the data to no ports. M/B mode has extra overhead to select the MIDI -Out for each byte, so the aggregate data rate across all four MIDI Outs is -at most one byte every 520 us, as compared with the full MIDI data rate of -one byte every 320 us per port. - -Usage example for M/B mode: - - /sbin/setserial /dev/ttyS0 uart none - /sbin/modprobe snd-serial-u16550 port=0x3f8 irq=4 adaptor=3 - -The MS-124W hardware's M/A mode is currently not supported. This mode allows -the MIDI Outs to act independently at double the aggregate throughput of M/B, -but does not allow sending the same byte simultaneously to multiple MIDI Outs. -The M/A protocol requires the driver to twiddle the modem control lines under -timing constraints, so it would be a bit more complicated to implement than -the other modes. - -Midiator models other than MS-124W and MS-124T are currently not supported. -Note that the suffix letter is significant; the MS-124 and MS-124B are not -compatible, nor are the other known models MS-101, MS-101B, MS-103, and MS-114. -I do have documentation (tim.mann@compaq.com) that partially covers these models, -but no units to experiment with. The MS-124W support is tested with a real unit. -The MS-124T support is untested, but should work. - -The Generic driver supports multiple input and output substreams over a single -serial port. Similar to Roland Soundcanvas mode, F5 NN is used to select the -appropriate input or output stream (depending on the data direction). -Additionally, the CTS signal is used to regulate the data flow. The number of -inputs is specified by the ins parameter. diff --git a/Documentation/sound/cards/index.rst b/Documentation/sound/cards/index.rst index b143eff93c87..976ef5eb8f89 100644 --- a/Documentation/sound/cards/index.rst +++ b/Documentation/sound/cards/index.rst @@ -15,3 +15,4 @@ Card-Specific Information bt87x maya44 hdspm + serial-u16550 diff --git a/Documentation/sound/cards/serial-u16550.rst b/Documentation/sound/cards/serial-u16550.rst new file mode 100644 index 000000000000..197aeacea3da --- /dev/null +++ b/Documentation/sound/cards/serial-u16550.rst @@ -0,0 +1,93 @@ +=================================== +Serial UART 16450/16550 MIDI driver +=================================== + +The adaptor module parameter allows you to select either: + +* 0 - Roland Soundcanvas support (default) +* 1 - Midiator MS-124T support (1) +* 2 - Midiator MS-124W S/A mode (2) +* 3 - MS-124W M/B mode support (3) +* 4 - Generic device with multiple input support (4) + +For the Midiator MS-124W, you must set the physical M-S and A-B +switches on the Midiator to match the driver mode you select. + +In Roland Soundcanvas mode, multiple ALSA raw MIDI substreams are supported +(midiCnD0-midiCnD15). Whenever you write to a different substream, the driver +sends the nonstandard MIDI command sequence F5 NN, where NN is the substream +number plus 1. Roland modules use this command to switch between different +"parts", so this feature lets you treat each part as a distinct raw MIDI +substream. The driver provides no way to send F5 00 (no selection) or to not +send the F5 NN command sequence at all; perhaps it ought to. + +Usage example for simple serial converter: +:: + + /sbin/setserial /dev/ttyS0 uart none + /sbin/modprobe snd-serial-u16550 port=0x3f8 irq=4 speed=115200 + +Usage example for Roland SoundCanvas with 4 MIDI ports: +:: + + /sbin/setserial /dev/ttyS0 uart none + /sbin/modprobe snd-serial-u16550 port=0x3f8 irq=4 outs=4 + +In MS-124T mode, one raw MIDI substream is supported (midiCnD0); the outs +module parameter is automatically set to 1. The driver sends the same data to +all four MIDI Out connectors. Set the A-B switch and the speed module +parameter to match (A=19200, B=9600). + +Usage example for MS-124T, with A-B switch in A position: +:: + + /sbin/setserial /dev/ttyS0 uart none + /sbin/modprobe snd-serial-u16550 port=0x3f8 irq=4 adaptor=1 \ + speed=19200 + +In MS-124W S/A mode, one raw MIDI substream is supported (midiCnD0); +the outs module parameter is automatically set to 1. The driver sends +the same data to all four MIDI Out connectors at full MIDI speed. + +Usage example for S/A mode: +:: + + /sbin/setserial /dev/ttyS0 uart none + /sbin/modprobe snd-serial-u16550 port=0x3f8 irq=4 adaptor=2 + +In MS-124W M/B mode, the driver supports 16 ALSA raw MIDI substreams; +the outs module parameter is automatically set to 16. The substream +number gives a bitmask of which MIDI Out connectors the data should be +sent to, with midiCnD1 sending to Out 1, midiCnD2 to Out 2, midiCnD4 to +Out 3, and midiCnD8 to Out 4. Thus midiCnD15 sends the data to all 4 ports. +As a special case, midiCnD0 also sends to all ports, since it is not useful +to send the data to no ports. M/B mode has extra overhead to select the MIDI +Out for each byte, so the aggregate data rate across all four MIDI Outs is +at most one byte every 520 us, as compared with the full MIDI data rate of +one byte every 320 us per port. + +Usage example for M/B mode: +:: + + /sbin/setserial /dev/ttyS0 uart none + /sbin/modprobe snd-serial-u16550 port=0x3f8 irq=4 adaptor=3 + +The MS-124W hardware's M/A mode is currently not supported. This mode allows +the MIDI Outs to act independently at double the aggregate throughput of M/B, +but does not allow sending the same byte simultaneously to multiple MIDI Outs. +The M/A protocol requires the driver to twiddle the modem control lines under +timing constraints, so it would be a bit more complicated to implement than +the other modes. + +Midiator models other than MS-124W and MS-124T are currently not supported. +Note that the suffix letter is significant; the MS-124 and MS-124B are not +compatible, nor are the other known models MS-101, MS-101B, MS-103, and MS-114. +I do have documentation (tim.mann@compaq.com) that partially covers these models, +but no units to experiment with. The MS-124W support is tested with a real unit. +The MS-124T support is untested, but should work. + +The Generic driver supports multiple input and output substreams over a single +serial port. Similar to Roland Soundcanvas mode, F5 NN is used to select the +appropriate input or output stream (depending on the data direction). +Additionally, the CTS signal is used to regulate the data flow. The number of +inputs is specified by the ins parameter. -- cgit v1.2.3