From ecf2a80a97b3d38ae008fa8a3cb98cd540ac1eae Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Fri, 27 Apr 2007 22:00:09 -0300 Subject: ACPI: thinkpad-acpi: add a fan-control feature master toggle Len Brown considers that an active by default fan control interface in laptops may be too close to giving users enough rope. There is a good chance he is quite correct on this, especially if someone decides to use that interface in applets and users are not aware of its risks. This patch adds a master switch to thinkpad-acpi that enables or disables the entire fan-control feature as a module parameter: "fan_control". It defaults to disabled. Set it to non-zero to enable fan control. Also, the patch removes the expermiental status from fan control, since it is stable enough to not be called experimental, and the master switch makes it safe enough to do so. Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown --- Documentation/thinkpad-acpi.txt | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) (limited to 'Documentation/thinkpad-acpi.txt') diff --git a/Documentation/thinkpad-acpi.txt b/Documentation/thinkpad-acpi.txt index eab4997efc0f..bca50d78a425 100644 --- a/Documentation/thinkpad-acpi.txt +++ b/Documentation/thinkpad-acpi.txt @@ -38,7 +38,7 @@ detailed description): - Experimental: embedded controller register dump - LCD brightness control - Volume control - - Experimental: fan speed, fan enable/disable + - Fan control and monitoring: fan speed, fan enable/disable - Experimental: WAN enable and disable A compatibility table by model and feature is maintained on the web @@ -681,21 +681,20 @@ distinct. The unmute the volume after the mute command, use either the up or down command (the level command will not unmute the volume). The current volume level and mute state is shown in the file. -EXPERIMENTAL: fan speed, fan enable/disable -------------------------------------------- +Fan control and monitoring: fan speed, fan enable/disable +--------------------------------------------------------- procfs: /proc/acpi/ibm/fan sysfs device attributes: (hwmon) fan_input, pwm1, pwm1_enable -This feature is marked EXPERIMENTAL because the implementation -directly accesses hardware registers and may not work as expected. USE -WITH CAUTION! To use this feature, you need to supply the -experimental=1 parameter when loading the module. +NOTE NOTE NOTE: fan control operations are disabled by default for +safety reasons. To enable them, the module parameter "fan_control=1" +must be given to thinkpad-acpi. This feature attempts to show the current fan speed, control mode and other fan data that might be available. The speed is read directly from the hardware registers of the embedded controller. This is known -to work on later R, T and X series ThinkPads but may show a bogus +to work on later R, T, X and Z series ThinkPads but may show a bogus value on other models. Fan levels: -- cgit v1.2.3