From 3cc7587b30032b7c4dd9610a55a77519e84da7db Mon Sep 17 00:00:00 2001 From: Rami Rosen Date: Fri, 17 May 2013 09:10:34 +0000 Subject: Documentation/sysctl/net.txt: fix (attribute removal). This patch removes mentioning the sysfsf net_device weight attribute (class/net//weight) in Documentation/sysctl/net.txt, since the net sysfs weight attribute was removed by the following patch: [NET]: Make NAPI polling independent of struct net_device objects bea3348eef27e6044b6161fd04c3152215f96411 Signed-off-by: Rami Rosen Signed-off-by: David S. Miller --- Documentation/sysctl/net.txt | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/sysctl/net.txt b/Documentation/sysctl/net.txt index 98335b7a5337..c1f8640c2fc8 100644 --- a/Documentation/sysctl/net.txt +++ b/Documentation/sysctl/net.txt @@ -93,8 +93,7 @@ netdev_budget Maximum number of packets taken from all interfaces in one polling cycle (NAPI poll). In one polling cycle interfaces which are registered to polling are -probed in a round-robin manner. The limit of packets in one such probe can be -set per-device via sysfs class/net//weight . +probed in a round-robin manner. netdev_max_backlog ------------------ -- cgit v1.2.3 From 6dffbe53fbdcc7bd5f6379fa18264f060b0cf61d Mon Sep 17 00:00:00 2001 From: Tony Prisk Date: Sat, 18 May 2013 09:39:07 +0000 Subject: net: velocity: Add platform device support to VIA velocity driver Add support for the VIA Velocity network driver to be bound to a OF created platform device. Signed-off-by: Tony Prisk Signed-off-by: David S. Miller --- .../devicetree/bindings/net/via-velocity.txt | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/via-velocity.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/net/via-velocity.txt b/Documentation/devicetree/bindings/net/via-velocity.txt new file mode 100644 index 000000000000..b3db469b1ad7 --- /dev/null +++ b/Documentation/devicetree/bindings/net/via-velocity.txt @@ -0,0 +1,20 @@ +* VIA Velocity 10/100/1000 Network Controller + +Required properties: +- compatible : Should be "via,velocity-vt6110" +- reg : Address and length of the io space +- interrupts : Should contain the controller interrupt line + +Optional properties: +- no-eeprom : PCI network cards use an external EEPROM to store data. Embedded + devices quite often set this data in uboot and do not provide an eeprom. + Specify this option if you have no external eeprom. + +Examples: + +eth0@d8004000 { + compatible = "via,velocity-vt6110"; + reg = <0xd8004000 0x400>; + interrupts = <10>; + no-eeprom; +}; -- cgit v1.2.3 From 0b8bf1baabe56f721d541953f083560d0660d78f Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Mon, 20 May 2013 09:16:58 +0000 Subject: net: dm9000: Allow instantiation using device tree This patch adds Device Tree support to dm9000 driver. Signed-off-by: Tomasz Figa Reviewed-by: Sylwester Nawrocki Reviewed-by: Sascha Hauer Signed-off-by: David S. Miller --- .../devicetree/bindings/net/davicom-dm9000.txt | 26 ++++++++++++++++++++++ .../devicetree/bindings/vendor-prefixes.txt | 1 + 2 files changed, 27 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/davicom-dm9000.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/net/davicom-dm9000.txt b/Documentation/devicetree/bindings/net/davicom-dm9000.txt new file mode 100644 index 000000000000..2d39c990e641 --- /dev/null +++ b/Documentation/devicetree/bindings/net/davicom-dm9000.txt @@ -0,0 +1,26 @@ +Davicom DM9000 Fast Ethernet controller + +Required properties: +- compatible = "davicom,dm9000"; +- reg : physical addresses and sizes of registers, must contain 2 entries: + first entry : address register, + second entry : data register. +- interrupt-parent : interrupt controller to which the device is connected +- interrupts : interrupt specifier specific to interrupt controller + +Optional properties: +- local-mac-address : A bytestring of 6 bytes specifying Ethernet MAC address + to use (from firmware or bootloader) +- davicom,no-eeprom : Configuration EEPROM is not available +- davicom,ext-phy : Use external PHY + +Example: + + ethernet@18000000 { + compatible = "davicom,dm9000"; + reg = <0x18000000 0x2 0x18000004 0x2>; + interrupt-parent = <&gpn>; + interrupts = <7 4>; + local-mac-address = [00 00 de ad be ef]; + davicom,no-eeprom; + }; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 6931c4348d24..2fe74e6ec209 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -18,6 +18,7 @@ chrp Common Hardware Reference Platform cirrus Cirrus Logic, Inc. cortina Cortina Systems, Inc. dallas Maxim Integrated Products (formerly Dallas Semiconductor) +davicom DAVICOM Semiconductor, Inc. denx Denx Software Engineering emmicro EM Microelectronic epson Seiko Epson Corp. -- cgit v1.2.3 From 191cb1f21afd9a7fbaa085ad9b86cb307e9a3891 Mon Sep 17 00:00:00 2001 From: Willem de Bruijn Date: Wed, 22 May 2013 07:54:40 +0000 Subject: rps: document flow limit in scaling.txt Explain the mechanism and API of the recently merged rps flow limit patch. Signed-off-by: Willem de Bruijn Signed-off-by: David S. Miller --- Documentation/networking/scaling.txt | 58 ++++++++++++++++++++++++++++++++++++ 1 file changed, 58 insertions(+) (limited to 'Documentation') diff --git a/Documentation/networking/scaling.txt b/Documentation/networking/scaling.txt index 579994afbe06..ca6977f5b2ed 100644 --- a/Documentation/networking/scaling.txt +++ b/Documentation/networking/scaling.txt @@ -163,6 +163,64 @@ and unnecessary. If there are fewer hardware queues than CPUs, then RPS might be beneficial if the rps_cpus for each queue are the ones that share the same memory domain as the interrupting CPU for that queue. +==== RPS Flow Limit + +RPS scales kernel receive processing across CPUs without introducing +reordering. The trade-off to sending all packets from the same flow +to the same CPU is CPU load imbalance if flows vary in packet rate. +In the extreme case a single flow dominates traffic. Especially on +common server workloads with many concurrent connections, such +behavior indicates a problem such as a misconfiguration or spoofed +source Denial of Service attack. + +Flow Limit is an optional RPS feature that prioritizes small flows +during CPU contention by dropping packets from large flows slightly +ahead of those from small flows. It is active only when an RPS or RFS +destination CPU approaches saturation. Once a CPU's input packet +queue exceeds half the maximum queue length (as set by sysctl +net.core.netdev_max_backlog), the kernel starts a per-flow packet +count over the last 256 packets. If a flow exceeds a set ratio (by +default, half) of these packets when a new packet arrives, then the +new packet is dropped. Packets from other flows are still only +dropped once the input packet queue reaches netdev_max_backlog. +No packets are dropped when the input packet queue length is below +the threshold, so flow limit does not sever connections outright: +even large flows maintain connectivity. + +== Interface + +Flow limit is compiled in by default (CONFIG_NET_FLOW_LIMIT), but not +turned on. It is implemented for each CPU independently (to avoid lock +and cache contention) and toggled per CPU by setting the relevant bit +in sysctl net.core.flow_limit_cpu_bitmap. It exposes the same CPU +bitmap interface as rps_cpus (see above) when called from procfs: + + /proc/sys/net/core/flow_limit_cpu_bitmap + +Per-flow rate is calculated by hashing each packet into a hashtable +bucket and incrementing a per-bucket counter. The hash function is +the same that selects a CPU in RPS, but as the number of buckets can +be much larger than the number of CPUs, flow limit has finer-grained +identification of large flows and fewer false positives. The default +table has 4096 buckets. This value can be modified through sysctl + + net.core.flow_limit_table_len + +The value is only consulted when a new table is allocated. Modifying +it does not update active tables. + +== Suggested Configuration + +Flow limit is useful on systems with many concurrent connections, +where a single connection taking up 50% of a CPU indicates a problem. +In such environments, enable the feature on all CPUs that handle +network rx interrupts (as set in /proc/irq/N/smp_affinity). + +The feature depends on the input packet queue length to exceed +the flow limit threshold (50%) + the flow history length (256). +Setting net.core.netdev_max_backlog to either 1000 or 10000 +performed well in experiments. + RFS: Receive Flow Steering ========================== -- cgit v1.2.3 From 8d61ffa5e01c5f676431d12caba17db164a48a86 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 10 May 2013 12:32:47 +0200 Subject: cfg80211/mac80211: use cfg80211 wdev mutex in mac80211 Using separate locks in cfg80211 and mac80211 has always caused issues, for example having to unlock in places in mac80211 to call cfg80211, which even needed a framework to make cfg80211 calls after some functions returned etc. Additionally, I suspect some issues people have reported with the cfg80211 state getting confused could be due to such issues, when cfg80211 is asking mac80211 to change state but mac80211 is in the process of telling cfg80211 that the state changed (in another way.) Signed-off-by: Johannes Berg --- Documentation/DocBook/80211.tmpl | 2 -- 1 file changed, 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/DocBook/80211.tmpl b/Documentation/DocBook/80211.tmpl index 0f6a3edcd44b..ebe89694cf81 100644 --- a/Documentation/DocBook/80211.tmpl +++ b/Documentation/DocBook/80211.tmpl @@ -132,9 +132,7 @@ !Finclude/net/cfg80211.h cfg80211_send_rx_assoc !Finclude/net/cfg80211.h cfg80211_send_assoc_timeout !Finclude/net/cfg80211.h cfg80211_send_deauth -!Finclude/net/cfg80211.h __cfg80211_send_deauth !Finclude/net/cfg80211.h cfg80211_send_disassoc -!Finclude/net/cfg80211.h __cfg80211_send_disassoc !Finclude/net/cfg80211.h cfg80211_ibss_joined !Finclude/net/cfg80211.h cfg80211_connect_result !Finclude/net/cfg80211.h cfg80211_roamed -- cgit v1.2.3 From 87227b8b2d4d556a6924ad9af87450fdc3fcd7e3 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Thu, 23 May 2013 23:01:22 +0000 Subject: net: micrel : ks8851-ml: add dt support Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller --- Documentation/devicetree/bindings/net/micrel-ks8851.txt | 9 +++++++++ 1 file changed, 9 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/micrel-ks8851.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/net/micrel-ks8851.txt b/Documentation/devicetree/bindings/net/micrel-ks8851.txt new file mode 100644 index 000000000000..11ace3c3d805 --- /dev/null +++ b/Documentation/devicetree/bindings/net/micrel-ks8851.txt @@ -0,0 +1,9 @@ +Micrel KS8851 Ethernet mac + +Required properties: +- compatible = "micrel,ks8851-ml" of parallel interface +- reg : 2 physical address and size of registers for data and command +- interrupts : interrupt connection + +Optional properties: +- local-mac-address : Ethernet mac address to use -- cgit v1.2.3 From 3dd17edea018bf37ca1c33685ca0256270ccdb2c Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Fri, 24 May 2013 07:05:59 +0000 Subject: doc:networking: Fix typo in documentation/networking Correct spelling typo Signed-off-by: Masanari Iida Signed-off-by: David S. Miller --- Documentation/networking/ifenslave.c | 2 +- Documentation/networking/ip-sysctl.txt | 2 +- Documentation/networking/netlink_mmap.txt | 14 +++++++------- 3 files changed, 9 insertions(+), 9 deletions(-) (limited to 'Documentation') diff --git a/Documentation/networking/ifenslave.c b/Documentation/networking/ifenslave.c index ac5debb2f16c..9f6a8fff9a78 100644 --- a/Documentation/networking/ifenslave.c +++ b/Documentation/networking/ifenslave.c @@ -501,7 +501,7 @@ out: static short mif_flags; -/* Get the inteface configuration from the kernel. */ +/* Get the interface configuration from the kernel. */ static int if_getconfig(char *ifname) { struct ifreq ifr; diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index f98ca633b528..398d0fb1dd0e 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -183,7 +183,7 @@ tcp_early_retrans - INTEGER for triggering fast retransmit when the amount of outstanding data is small and when no previously unsent data can be transmitted (such that limited transmit could be used). Also controls the use of - Tail loss probe (TLP) that converts RTOs occuring due to tail + Tail loss probe (TLP) that converts RTOs occurring due to tail losses into fast recovery (draft-dukkipati-tcpm-tcp-loss-probe-01). Possible values: 0 disables ER diff --git a/Documentation/networking/netlink_mmap.txt b/Documentation/networking/netlink_mmap.txt index 1c2dab409625..e6088baf109d 100644 --- a/Documentation/networking/netlink_mmap.txt +++ b/Documentation/networking/netlink_mmap.txt @@ -54,7 +54,7 @@ it will use an allocated socket buffer as usual and the contents will be copied to the ring on transmission, nullifying most of the performance gains. Dumps of kernel databases automatically support memory mapped I/O. -Conversion of the transmit path involves changing message contruction to +Conversion of the transmit path involves changing message construction to use memory from the TX ring instead of (usually) a buffer declared on the stack and setting up the frame header approriately. Optionally poll() can be used to wait for free frames in the TX ring. @@ -65,8 +65,8 @@ Structured and definitions for using memory mapped I/O are contained in RX and TX rings ---------------- -Each ring contains a number of continous memory blocks, containing frames of -fixed size dependant on the parameters used for ring setup. +Each ring contains a number of continuous memory blocks, containing frames of +fixed size dependent on the parameters used for ring setup. Ring: [ block 0 ] [ frame 0 ] @@ -80,7 +80,7 @@ Ring: [ block 0 ] [ frame 2 * n + 1 ] The blocks are only visible to the kernel, from the point of view of user-space -the ring just contains the frames in a continous memory zone. +the ring just contains the frames in a continuous memory zone. The ring parameters used for setting up the ring are defined as follows: @@ -91,7 +91,7 @@ struct nl_mmap_req { unsigned int nm_frame_nr; }; -Frames are grouped into blocks, where each block is a continous region of memory +Frames are grouped into blocks, where each block is a continuous region of memory and holds nm_block_size / nm_frame_size frames. The total number of frames in the ring is nm_frame_nr. The following invariants hold: @@ -113,8 +113,8 @@ Some parameters are constrained, specifically: - nm_frame_nr must equal the actual number of frames as specified above. -When the kernel can't allocate phsyically continous memory for a ring block, -it will fall back to use physically discontinous memory. This might affect +When the kernel can't allocate phsyically continuous memory for a ring block, +it will fall back to use physically discontinuous memory. This might affect performance negatively, in order to avoid this the nm_frame_size parameter should be chosen to be as small as possible for the required frame size and the number of blocks should be increased instead. -- cgit v1.2.3 From b1098bbe1b24d5d90cff92fbd716d2ef4bed2cff Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Mon, 27 May 2013 15:49:16 +0000 Subject: bonding: remove ifenslave.c from kernel source As Stephen proposed: Since bonding supports configuration via iproute (netlink) and sysfs, I think it is time to purge the old ifenslave code out of Documentation/networking and update the documentation. Suggested-by: Stephen Hemminger Cc: Stephen Hemminger Cc: Jay Vosburgh Cc: "David S. Miller" Signed-off-by: Cong Wang Signed-off-by: David S. Miller --- Documentation/networking/.gitignore | 1 - Documentation/networking/00-INDEX | 2 - Documentation/networking/Makefile | 5 - Documentation/networking/bonding.txt | 54 +- Documentation/networking/ifenslave.c | 1105 ---------------------------------- 5 files changed, 10 insertions(+), 1157 deletions(-) delete mode 100644 Documentation/networking/ifenslave.c (limited to 'Documentation') diff --git a/Documentation/networking/.gitignore b/Documentation/networking/.gitignore index 286a5680f490..e69de29bb2d1 100644 --- a/Documentation/networking/.gitignore +++ b/Documentation/networking/.gitignore @@ -1 +0,0 @@ -ifenslave diff --git a/Documentation/networking/00-INDEX b/Documentation/networking/00-INDEX index 258d9b92c36f..32dfbd924121 100644 --- a/Documentation/networking/00-INDEX +++ b/Documentation/networking/00-INDEX @@ -88,8 +88,6 @@ gianfar.txt - Gianfar Ethernet Driver. ieee802154.txt - Linux IEEE 802.15.4 implementation, API and drivers -ifenslave.c - - Configure network interfaces for parallel routing (bonding). igb.txt - README for the Intel Gigabit Ethernet Driver (igb). igbvf.txt diff --git a/Documentation/networking/Makefile b/Documentation/networking/Makefile index 24c308dd3fd1..0aa1ac98fc2b 100644 --- a/Documentation/networking/Makefile +++ b/Documentation/networking/Makefile @@ -1,11 +1,6 @@ # kbuild trick to avoid linker error. Can be omitted if a module is built. obj- := dummy.o -# List of programs to build -hostprogs-y := ifenslave - -HOSTCFLAGS_ifenslave.o += -I$(objtree)/usr/include - # Tell kbuild to always build the programs always := $(hostprogs-y) diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt index 10a015c384b8..e7454fcc9176 100644 --- a/Documentation/networking/bonding.txt +++ b/Documentation/networking/bonding.txt @@ -104,8 +104,7 @@ Table of Contents ============================== Most popular distro kernels ship with the bonding driver -already available as a module and the ifenslave user level control -program installed and ready for use. If your distro does not, or you +already available as a module. If your distro does not, or you have need to compile bonding from source (e.g., configuring and installing a mainline kernel from kernel.org), you'll need to perform the following steps: @@ -124,46 +123,13 @@ device support" section. It is recommended that you configure the driver as module since it is currently the only way to pass parameters to the driver or configure more than one bonding device. - Build and install the new kernel and modules, then continue -below to install ifenslave. + Build and install the new kernel and modules. -1.2 Install ifenslave Control Utility +1.2 Bonding Control Utility ------------------------------------- - The ifenslave user level control program is included in the -kernel source tree, in the file Documentation/networking/ifenslave.c. -It is generally recommended that you use the ifenslave that -corresponds to the kernel that you are using (either from the same -source tree or supplied with the distro), however, ifenslave -executables from older kernels should function (but features newer -than the ifenslave release are not supported). Running an ifenslave -that is newer than the kernel is not supported, and may or may not -work. - - To install ifenslave, do the following: - -# gcc -Wall -O -I/usr/src/linux/include ifenslave.c -o ifenslave -# cp ifenslave /sbin/ifenslave - - If your kernel source is not in "/usr/src/linux," then replace -"/usr/src/linux/include" in the above with the location of your kernel -source include directory. - - You may wish to back up any existing /sbin/ifenslave, or, for -testing or informal use, tag the ifenslave to the kernel version -(e.g., name the ifenslave executable /sbin/ifenslave-2.6.10). - -IMPORTANT NOTE: - - If you omit the "-I" or specify an incorrect directory, you -may end up with an ifenslave that is incompatible with the kernel -you're trying to build it for. Some distros (e.g., Red Hat from 7.1 -onwards) do not have /usr/include/linux symbolically linked to the -default kernel source include directory. - -SECOND IMPORTANT NOTE: - If you plan to configure bonding using sysfs or using the -/etc/network/interfaces file, you do not need to use ifenslave. + It is recommended to configure bonding via iproute2 (netlink) +or sysfs, the old ifenslave control utility is obsolete. 2. Bonding Driver Options ========================= @@ -851,7 +817,7 @@ resend_igmp ============================== You can configure bonding using either your distro's network -initialization scripts, or manually using either ifenslave or the +initialization scripts, or manually using either iproute2 or the sysfs interface. Distros generally use one of three packages for the network initialization scripts: initscripts, sysconfig or interfaces. Recent versions of these packages have support for bonding, while older @@ -1160,7 +1126,7 @@ not support this method for specifying multiple bonding interfaces; for those instances, see the "Configuring Multiple Bonds Manually" section, below. -3.3 Configuring Bonding Manually with Ifenslave +3.3 Configuring Bonding Manually with iproute2 ----------------------------------------------- This section applies to distros whose network initialization @@ -1171,7 +1137,7 @@ version 8. The general method for these systems is to place the bonding module parameters into a config file in /etc/modprobe.d/ (as appropriate for the installed distro), then add modprobe and/or -ifenslave commands to the system's global init script. The name of +`ip link` commands to the system's global init script. The name of the global init script differs; for sysconfig, it is /etc/init.d/boot.local and for initscripts it is /etc/rc.d/rc.local. @@ -1183,8 +1149,8 @@ reboots, edit the appropriate file (/etc/init.d/boot.local or modprobe bonding mode=balance-alb miimon=100 modprobe e100 ifconfig bond0 192.168.1.1 netmask 255.255.255.0 up -ifenslave bond0 eth0 -ifenslave bond0 eth1 +ip link set eth0 master bond0 +ip link set eth1 master bond0 Replace the example bonding module parameters and bond0 network configuration (IP address, netmask, etc) with the appropriate diff --git a/Documentation/networking/ifenslave.c b/Documentation/networking/ifenslave.c deleted file mode 100644 index 9f6a8fff9a78..000000000000 --- a/Documentation/networking/ifenslave.c +++ /dev/null @@ -1,1105 +0,0 @@ -/* Mode: C; - * ifenslave.c: Configure network interfaces for parallel routing. - * - * This program controls the Linux implementation of running multiple - * network interfaces in parallel. - * - * Author: Donald Becker - * Copyright 1994-1996 Donald Becker - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General Public - * License as published by the Free Software Foundation. - * - * The author may be reached as becker@CESDIS.gsfc.nasa.gov, or C/O - * Center of Excellence in Space Data and Information Sciences - * Code 930.5, Goddard Space Flight Center, Greenbelt MD 20771 - * - * Changes : - * - 2000/10/02 Willy Tarreau : - * - few fixes. Master's MAC address is now correctly taken from - * the first device when not previously set ; - * - detach support : call BOND_RELEASE to detach an enslaved interface. - * - give a mini-howto from command-line help : # ifenslave -h - * - * - 2001/02/16 Chad N. Tindel : - * - Master is now brought down before setting the MAC address. In - * the 2.4 kernel you can't change the MAC address while the device is - * up because you get EBUSY. - * - * - 2001/09/13 Takao Indoh - * - Added the ability to change the active interface on a mode 1 bond - * at runtime. - * - * - 2001/10/23 Chad N. Tindel : - * - No longer set the MAC address of the master. The bond device will - * take care of this itself - * - Try the SIOC*** versions of the bonding ioctls before using the - * old versions - * - 2002/02/18 Erik Habbinga : - * - ifr2.ifr_flags was not initialized in the hwaddr_notset case, - * SIOCGIFFLAGS now called before hwaddr_notset test - * - * - 2002/10/31 Tony Cureington : - * - If the master does not have a hardware address when the first slave - * is enslaved, the master is assigned the hardware address of that - * slave - there is a comment in bonding.c stating "ifenslave takes - * care of this now." This corrects the problem of slaves having - * different hardware addresses in active-backup mode when - * multiple interfaces are specified on a single ifenslave command - * (ifenslave bond0 eth0 eth1). - * - * - 2003/03/18 - Tsippy Mendelson and - * Shmulik Hen - * - Moved setting the slave's mac address and openning it, from - * the application to the driver. This enables support of modes - * that need to use the unique mac address of each slave. - * The driver also takes care of closing the slave and restoring its - * original mac address upon release. - * In addition, block possibility of enslaving before the master is up. - * This prevents putting the system in an undefined state. - * - * - 2003/05/01 - Amir Noam - * - Added ABI version control to restore compatibility between - * new/old ifenslave and new/old bonding. - * - Prevent adding an adapter that is already a slave. - * Fixes the problem of stalling the transmission and leaving - * the slave in a down state. - * - * - 2003/05/01 - Shmulik Hen - * - Prevent enslaving if the bond device is down. - * Fixes the problem of leaving the system in unstable state and - * halting when trying to remove the module. - * - Close socket on all abnormal exists. - * - Add versioning scheme that follows that of the bonding driver. - * current version is 1.0.0 as a base line. - * - * - 2003/05/22 - Jay Vosburgh - * - ifenslave -c was broken; it's now fixed - * - Fixed problem with routes vanishing from master during enslave - * processing. - * - * - 2003/05/27 - Amir Noam - * - Fix backward compatibility issues: - * For drivers not using ABI versions, slave was set down while - * it should be left up before enslaving. - * Also, master was not set down and the default set_mac_address() - * would fail and generate an error message in the system log. - * - For opt_c: slave should not be set to the master's setting - * while it is running. It was already set during enslave. To - * simplify things, it is now handled separately. - * - * - 2003/12/01 - Shmulik Hen - * - Code cleanup and style changes - * set version to 1.1.0 - */ - -#define APP_VERSION "1.1.0" -#define APP_RELDATE "December 1, 2003" -#define APP_NAME "ifenslave" - -static char *version = -APP_NAME ".c:v" APP_VERSION " (" APP_RELDATE ")\n" -"o Donald Becker (becker@cesdis.gsfc.nasa.gov).\n" -"o Detach support added on 2000/10/02 by Willy Tarreau (willy at meta-x.org).\n" -"o 2.4 kernel support added on 2001/02/16 by Chad N. Tindel\n" -" (ctindel at ieee dot org).\n"; - -static const char *usage_msg = -"Usage: ifenslave [-f] [...]\n" -" ifenslave -d [...]\n" -" ifenslave -c \n" -" ifenslave --help\n"; - -static const char *help_msg = -"\n" -" To create a bond device, simply follow these three steps :\n" -" - ensure that the required drivers are properly loaded :\n" -" # modprobe bonding ; modprobe <3c59x|eepro100|pcnet32|tulip|...>\n" -" - assign an IP address to the bond device :\n" -" # ifconfig bond0 netmask broadcast \n" -" - attach all the interfaces you need to the bond device :\n" -" # ifenslave [{-f|--force}] bond0 eth0 [eth1 [eth2]...]\n" -" If bond0 didn't have a MAC address, it will take eth0's. Then, all\n" -" interfaces attached AFTER this assignment will get the same MAC addr.\n" -" (except for ALB/TLB modes)\n" -"\n" -" To set the bond device down and automatically release all the slaves :\n" -" # ifconfig bond0 down\n" -"\n" -" To detach a dead interface without setting the bond device down :\n" -" # ifenslave {-d|--detach} bond0 eth0 [eth1 [eth2]...]\n" -"\n" -" To change active slave :\n" -" # ifenslave {-c|--change-active} bond0 eth0\n" -"\n" -" To show master interface info\n" -" # ifenslave bond0\n" -"\n" -" To show all interfaces info\n" -" # ifenslave {-a|--all-interfaces}\n" -"\n" -" To be more verbose\n" -" # ifenslave {-v|--verbose} ...\n" -"\n" -" # ifenslave {-u|--usage} Show usage\n" -" # ifenslave {-V|--version} Show version\n" -" # ifenslave {-h|--help} This message\n" -"\n"; - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -typedef unsigned long long u64; /* hack, so we may include kernel's ethtool.h */ -typedef __uint32_t u32; /* ditto */ -typedef __uint16_t u16; /* ditto */ -typedef __uint8_t u8; /* ditto */ -#include - -struct option longopts[] = { - /* { name has_arg *flag val } */ - {"all-interfaces", 0, 0, 'a'}, /* Show all interfaces. */ - {"change-active", 0, 0, 'c'}, /* Change the active slave. */ - {"detach", 0, 0, 'd'}, /* Detach a slave interface. */ - {"force", 0, 0, 'f'}, /* Force the operation. */ - {"help", 0, 0, 'h'}, /* Give help */ - {"usage", 0, 0, 'u'}, /* Give usage */ - {"verbose", 0, 0, 'v'}, /* Report each action taken. */ - {"version", 0, 0, 'V'}, /* Emit version information. */ - { 0, 0, 0, 0} -}; - -/* Command-line flags. */ -unsigned int -opt_a = 0, /* Show-all-interfaces flag. */ -opt_c = 0, /* Change-active-slave flag. */ -opt_d = 0, /* Detach a slave interface. */ -opt_f = 0, /* Force the operation. */ -opt_h = 0, /* Help */ -opt_u = 0, /* Usage */ -opt_v = 0, /* Verbose flag. */ -opt_V = 0; /* Version */ - -int skfd = -1; /* AF_INET socket for ioctl() calls.*/ -int abi_ver = 0; /* userland - kernel ABI version */ -int hwaddr_set = 0; /* Master's hwaddr is set */ -int saved_errno; - -struct ifreq master_mtu, master_flags, master_hwaddr; -struct ifreq slave_mtu, slave_flags, slave_hwaddr; - -struct dev_ifr { - struct ifreq *req_ifr; - char *req_name; - int req_type; -}; - -struct dev_ifr master_ifra[] = { - {&master_mtu, "SIOCGIFMTU", SIOCGIFMTU}, - {&master_flags, "SIOCGIFFLAGS", SIOCGIFFLAGS}, - {&master_hwaddr, "SIOCGIFHWADDR", SIOCGIFHWADDR}, - {NULL, "", 0} -}; - -struct dev_ifr slave_ifra[] = { - {&slave_mtu, "SIOCGIFMTU", SIOCGIFMTU}, - {&slave_flags, "SIOCGIFFLAGS", SIOCGIFFLAGS}, - {&slave_hwaddr, "SIOCGIFHWADDR", SIOCGIFHWADDR}, - {NULL, "", 0} -}; - -static void if_print(char *ifname); -static int get_drv_info(char *master_ifname); -static int get_if_settings(char *ifname, struct dev_ifr ifra[]); -static int get_slave_flags(char *slave_ifname); -static int set_master_hwaddr(char *master_ifname, struct sockaddr *hwaddr); -static int set_slave_hwaddr(char *slave_ifname, struct sockaddr *hwaddr); -static int set_slave_mtu(char *slave_ifname, int mtu); -static int set_if_flags(char *ifname, short flags); -static int set_if_up(char *ifname, short flags); -static int set_if_down(char *ifname, short flags); -static int clear_if_addr(char *ifname); -static int set_if_addr(char *master_ifname, char *slave_ifname); -static int change_active(char *master_ifname, char *slave_ifname); -static int enslave(char *master_ifname, char *slave_ifname); -static int release(char *master_ifname, char *slave_ifname); -#define v_print(fmt, args...) \ - if (opt_v) \ - fprintf(stderr, fmt, ## args ) - -int main(int argc, char *argv[]) -{ - char **spp, *master_ifname, *slave_ifname; - int c, i, rv; - int res = 0; - int exclusive = 0; - - while ((c = getopt_long(argc, argv, "acdfhuvV", longopts, 0)) != EOF) { - switch (c) { - case 'a': opt_a++; exclusive++; break; - case 'c': opt_c++; exclusive++; break; - case 'd': opt_d++; exclusive++; break; - case 'f': opt_f++; exclusive++; break; - case 'h': opt_h++; exclusive++; break; - case 'u': opt_u++; exclusive++; break; - case 'v': opt_v++; break; - case 'V': opt_V++; exclusive++; break; - - case '?': - fprintf(stderr, "%s", usage_msg); - res = 2; - goto out; - } - } - - /* options check */ - if (exclusive > 1) { - fprintf(stderr, "%s", usage_msg); - res = 2; - goto out; - } - - if (opt_v || opt_V) { - printf("%s", version); - if (opt_V) { - res = 0; - goto out; - } - } - - if (opt_u) { - printf("%s", usage_msg); - res = 0; - goto out; - } - - if (opt_h) { - printf("%s", usage_msg); - printf("%s", help_msg); - res = 0; - goto out; - } - - /* Open a basic socket */ - if ((skfd = socket(AF_INET, SOCK_DGRAM, 0)) < 0) { - perror("socket"); - res = 1; - goto out; - } - - if (opt_a) { - if (optind == argc) { - /* No remaining args */ - /* show all interfaces */ - if_print((char *)NULL); - goto out; - } else { - /* Just show usage */ - fprintf(stderr, "%s", usage_msg); - res = 2; - goto out; - } - } - - /* Copy the interface name */ - spp = argv + optind; - master_ifname = *spp++; - - if (master_ifname == NULL) { - fprintf(stderr, "%s", usage_msg); - res = 2; - goto out; - } - - /* exchange abi version with bonding module */ - res = get_drv_info(master_ifname); - if (res) { - fprintf(stderr, - "Master '%s': Error: handshake with driver failed. " - "Aborting\n", - master_ifname); - goto out; - } - - slave_ifname = *spp++; - - if (slave_ifname == NULL) { - if (opt_d || opt_c) { - fprintf(stderr, "%s", usage_msg); - res = 2; - goto out; - } - - /* A single arg means show the - * configuration for this interface - */ - if_print(master_ifname); - goto out; - } - - res = get_if_settings(master_ifname, master_ifra); - if (res) { - /* Probably a good reason not to go on */ - fprintf(stderr, - "Master '%s': Error: get settings failed: %s. " - "Aborting\n", - master_ifname, strerror(res)); - goto out; - } - - /* check if master is indeed a master; - * if not then fail any operation - */ - if (!(master_flags.ifr_flags & IFF_MASTER)) { - fprintf(stderr, - "Illegal operation; the specified interface '%s' " - "is not a master. Aborting\n", - master_ifname); - res = 1; - goto out; - } - - /* check if master is up; if not then fail any operation */ - if (!(master_flags.ifr_flags & IFF_UP)) { - fprintf(stderr, - "Illegal operation; the specified master interface " - "'%s' is not up.\n", - master_ifname); - res = 1; - goto out; - } - - /* Only for enslaving */ - if (!opt_c && !opt_d) { - sa_family_t master_family = master_hwaddr.ifr_hwaddr.sa_family; - unsigned char *hwaddr = - (unsigned char *)master_hwaddr.ifr_hwaddr.sa_data; - - /* The family '1' is ARPHRD_ETHER for ethernet. */ - if (master_family != 1 && !opt_f) { - fprintf(stderr, - "Illegal operation: The specified master " - "interface '%s' is not ethernet-like.\n " - "This program is designed to work with " - "ethernet-like network interfaces.\n " - "Use the '-f' option to force the " - "operation.\n", - master_ifname); - res = 1; - goto out; - } - - /* Check master's hw addr */ - for (i = 0; i < 6; i++) { - if (hwaddr[i] != 0) { - hwaddr_set = 1; - break; - } - } - - if (hwaddr_set) { - v_print("current hardware address of master '%s' " - "is %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x, " - "type %d\n", - master_ifname, - hwaddr[0], hwaddr[1], - hwaddr[2], hwaddr[3], - hwaddr[4], hwaddr[5], - master_family); - } - } - - /* Accepts only one slave */ - if (opt_c) { - /* change active slave */ - res = get_slave_flags(slave_ifname); - if (res) { - fprintf(stderr, - "Slave '%s': Error: get flags failed. " - "Aborting\n", - slave_ifname); - goto out; - } - res = change_active(master_ifname, slave_ifname); - if (res) { - fprintf(stderr, - "Master '%s', Slave '%s': Error: " - "Change active failed\n", - master_ifname, slave_ifname); - } - } else { - /* Accept multiple slaves */ - do { - if (opt_d) { - /* detach a slave interface from the master */ - rv = get_slave_flags(slave_ifname); - if (rv) { - /* Can't work with this slave. */ - /* remember the error and skip it*/ - fprintf(stderr, - "Slave '%s': Error: get flags " - "failed. Skipping\n", - slave_ifname); - res = rv; - continue; - } - rv = release(master_ifname, slave_ifname); - if (rv) { - fprintf(stderr, - "Master '%s', Slave '%s': Error: " - "Release failed\n", - master_ifname, slave_ifname); - res = rv; - } - } else { - /* attach a slave interface to the master */ - rv = get_if_settings(slave_ifname, slave_ifra); - if (rv) { - /* Can't work with this slave. */ - /* remember the error and skip it*/ - fprintf(stderr, - "Slave '%s': Error: get " - "settings failed: %s. " - "Skipping\n", - slave_ifname, strerror(rv)); - res = rv; - continue; - } - rv = enslave(master_ifname, slave_ifname); - if (rv) { - fprintf(stderr, - "Master '%s', Slave '%s': Error: " - "Enslave failed\n", - master_ifname, slave_ifname); - res = rv; - } - } - } while ((slave_ifname = *spp++) != NULL); - } - -out: - if (skfd >= 0) { - close(skfd); - } - - return res; -} - -static short mif_flags; - -/* Get the interface configuration from the kernel. */ -static int if_getconfig(char *ifname) -{ - struct ifreq ifr; - int metric, mtu; /* Parameters of the master interface. */ - struct sockaddr dstaddr, broadaddr, netmask; - unsigned char *hwaddr; - - strcpy(ifr.ifr_name, ifname); - if (ioctl(skfd, SIOCGIFFLAGS, &ifr) < 0) - return -1; - mif_flags = ifr.ifr_flags; - printf("The result of SIOCGIFFLAGS on %s is %x.\n", - ifname, ifr.ifr_flags); - - strcpy(ifr.ifr_name, ifname); - if (ioctl(skfd, SIOCGIFADDR, &ifr) < 0) - return -1; - printf("The result of SIOCGIFADDR is %2.2x.%2.2x.%2.2x.%2.2x.\n", - ifr.ifr_addr.sa_data[0], ifr.ifr_addr.sa_data[1], - ifr.ifr_addr.sa_data[2], ifr.ifr_addr.sa_data[3]); - - strcpy(ifr.ifr_name, ifname); - if (ioctl(skfd, SIOCGIFHWADDR, &ifr) < 0) - return -1; - - /* Gotta convert from 'char' to unsigned for printf(). */ - hwaddr = (unsigned char *)ifr.ifr_hwaddr.sa_data; - printf("The result of SIOCGIFHWADDR is type %d " - "%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x.\n", - ifr.ifr_hwaddr.sa_family, hwaddr[0], hwaddr[1], - hwaddr[2], hwaddr[3], hwaddr[4], hwaddr[5]); - - strcpy(ifr.ifr_name, ifname); - if (ioctl(skfd, SIOCGIFMETRIC, &ifr) < 0) { - metric = 0; - } else - metric = ifr.ifr_metric; - printf("The result of SIOCGIFMETRIC is %d\n", metric); - - strcpy(ifr.ifr_name, ifname); - if (ioctl(skfd, SIOCGIFMTU, &ifr) < 0) - mtu = 0; - else - mtu = ifr.ifr_mtu; - printf("The result of SIOCGIFMTU is %d\n", mtu); - - strcpy(ifr.ifr_name, ifname); - if (ioctl(skfd, SIOCGIFDSTADDR, &ifr) < 0) { - memset(&dstaddr, 0, sizeof(struct sockaddr)); - } else - dstaddr = ifr.ifr_dstaddr; - - strcpy(ifr.ifr_name, ifname); - if (ioctl(skfd, SIOCGIFBRDADDR, &ifr) < 0) { - memset(&broadaddr, 0, sizeof(struct sockaddr)); - } else - broadaddr = ifr.ifr_broadaddr; - - strcpy(ifr.ifr_name, ifname); - if (ioctl(skfd, SIOCGIFNETMASK, &ifr) < 0) { - memset(&netmask, 0, sizeof(struct sockaddr)); - } else - netmask = ifr.ifr_netmask; - - return 0; -} - -static void if_print(char *ifname) -{ - char buff[1024]; - struct ifconf ifc; - struct ifreq *ifr; - int i; - - if (ifname == (char *)NULL) { - ifc.ifc_len = sizeof(buff); - ifc.ifc_buf = buff; - if (ioctl(skfd, SIOCGIFCONF, &ifc) < 0) { - perror("SIOCGIFCONF failed"); - return; - } - - ifr = ifc.ifc_req; - for (i = ifc.ifc_len / sizeof(struct ifreq); --i >= 0; ifr++) { - if (if_getconfig(ifr->ifr_name) < 0) { - fprintf(stderr, - "%s: unknown interface.\n", - ifr->ifr_name); - continue; - } - - if (((mif_flags & IFF_UP) == 0) && !opt_a) continue; - /*ife_print(&ife);*/ - } - } else { - if (if_getconfig(ifname) < 0) { - fprintf(stderr, - "%s: unknown interface.\n", ifname); - } - } -} - -static int get_drv_info(char *master_ifname) -{ - struct ifreq ifr; - struct ethtool_drvinfo info; - char *endptr; - - memset(&ifr, 0, sizeof(ifr)); - strncpy(ifr.ifr_name, master_ifname, IFNAMSIZ); - ifr.ifr_data = (caddr_t)&info; - - info.cmd = ETHTOOL_GDRVINFO; - strncpy(info.driver, "ifenslave", 32); - snprintf(info.fw_version, 32, "%d", BOND_ABI_VERSION); - - if (ioctl(skfd, SIOCETHTOOL, &ifr) < 0) { - if (errno == EOPNOTSUPP) { - goto out; - } - - saved_errno = errno; - v_print("Master '%s': Error: get bonding info failed %s\n", - master_ifname, strerror(saved_errno)); - return 1; - } - - abi_ver = strtoul(info.fw_version, &endptr, 0); - if (*endptr) { - v_print("Master '%s': Error: got invalid string as an ABI " - "version from the bonding module\n", - master_ifname); - return 1; - } - -out: - v_print("ABI ver is %d\n", abi_ver); - - return 0; -} - -static int change_active(char *master_ifname, char *slave_ifname) -{ - struct ifreq ifr; - int res = 0; - - if (!(slave_flags.ifr_flags & IFF_SLAVE)) { - fprintf(stderr, - "Illegal operation: The specified slave interface " - "'%s' is not a slave\n", - slave_ifname); - return 1; - } - - strncpy(ifr.ifr_name, master_ifname, IFNAMSIZ); - strncpy(ifr.ifr_slave, slave_ifname, IFNAMSIZ); - if ((ioctl(skfd, SIOCBONDCHANGEACTIVE, &ifr) < 0) && - (ioctl(skfd, BOND_CHANGE_ACTIVE_OLD, &ifr) < 0)) { - saved_errno = errno; - v_print("Master '%s': Error: SIOCBONDCHANGEACTIVE failed: " - "%s\n", - master_ifname, strerror(saved_errno)); - res = 1; - } - - return res; -} - -static int enslave(char *master_ifname, char *slave_ifname) -{ - struct ifreq ifr; - int res = 0; - - if (slave_flags.ifr_flags & IFF_SLAVE) { - fprintf(stderr, - "Illegal operation: The specified slave interface " - "'%s' is already a slave\n", - slave_ifname); - return 1; - } - - res = set_if_down(slave_ifname, slave_flags.ifr_flags); - if (res) { - fprintf(stderr, - "Slave '%s': Error: bring interface down failed\n", - slave_ifname); - return res; - } - - if (abi_ver < 2) { - /* Older bonding versions would panic if the slave has no IP - * address, so get the IP setting from the master. - */ - set_if_addr(master_ifname, slave_ifname); - } else { - res = clear_if_addr(slave_ifname); - if (res) { - fprintf(stderr, - "Slave '%s': Error: clear address failed\n", - slave_ifname); - return res; - } - } - - if (master_mtu.ifr_mtu != slave_mtu.ifr_mtu) { - res = set_slave_mtu(slave_ifname, master_mtu.ifr_mtu); - if (res) { - fprintf(stderr, - "Slave '%s': Error: set MTU failed\n", - slave_ifname); - return res; - } - } - - if (hwaddr_set) { - /* Master already has an hwaddr - * so set it's hwaddr to the slave - */ - if (abi_ver < 1) { - /* The driver is using an old ABI, so - * the application sets the slave's - * hwaddr - */ - res = set_slave_hwaddr(slave_ifname, - &(master_hwaddr.ifr_hwaddr)); - if (res) { - fprintf(stderr, - "Slave '%s': Error: set hw address " - "failed\n", - slave_ifname); - goto undo_mtu; - } - - /* For old ABI the application needs to bring the - * slave back up - */ - res = set_if_up(slave_ifname, slave_flags.ifr_flags); - if (res) { - fprintf(stderr, - "Slave '%s': Error: bring interface " - "down failed\n", - slave_ifname); - goto undo_slave_mac; - } - } - /* The driver is using a new ABI, - * so the driver takes care of setting - * the slave's hwaddr and bringing - * it up again - */ - } else { - /* No hwaddr for master yet, so - * set the slave's hwaddr to it - */ - if (abi_ver < 1) { - /* For old ABI, the master needs to be - * down before setting its hwaddr - */ - res = set_if_down(master_ifname, master_flags.ifr_flags); - if (res) { - fprintf(stderr, - "Master '%s': Error: bring interface " - "down failed\n", - master_ifname); - goto undo_mtu; - } - } - - res = set_master_hwaddr(master_ifname, - &(slave_hwaddr.ifr_hwaddr)); - if (res) { - fprintf(stderr, - "Master '%s': Error: set hw address " - "failed\n", - master_ifname); - goto undo_mtu; - } - - if (abi_ver < 1) { - /* For old ABI, bring the master - * back up - */ - res = set_if_up(master_ifname, master_flags.ifr_flags); - if (res) { - fprintf(stderr, - "Master '%s': Error: bring interface " - "up failed\n", - master_ifname); - goto undo_master_mac; - } - } - - hwaddr_set = 1; - } - - /* Do the real thing */ - strncpy(ifr.ifr_name, master_ifname, IFNAMSIZ); - strncpy(ifr.ifr_slave, slave_ifname, IFNAMSIZ); - if ((ioctl(skfd, SIOCBONDENSLAVE, &ifr) < 0) && - (ioctl(skfd, BOND_ENSLAVE_OLD, &ifr) < 0)) { - saved_errno = errno; - v_print("Master '%s': Error: SIOCBONDENSLAVE failed: %s\n", - master_ifname, strerror(saved_errno)); - res = 1; - } - - if (res) { - goto undo_master_mac; - } - - return 0; - -/* rollback (best effort) */ -undo_master_mac: - set_master_hwaddr(master_ifname, &(master_hwaddr.ifr_hwaddr)); - hwaddr_set = 0; - goto undo_mtu; -undo_slave_mac: - set_slave_hwaddr(slave_ifname, &(slave_hwaddr.ifr_hwaddr)); -undo_mtu: - set_slave_mtu(slave_ifname, slave_mtu.ifr_mtu); - return res; -} - -static int release(char *master_ifname, char *slave_ifname) -{ - struct ifreq ifr; - int res = 0; - - if (!(slave_flags.ifr_flags & IFF_SLAVE)) { - fprintf(stderr, - "Illegal operation: The specified slave interface " - "'%s' is not a slave\n", - slave_ifname); - return 1; - } - - strncpy(ifr.ifr_name, master_ifname, IFNAMSIZ); - strncpy(ifr.ifr_slave, slave_ifname, IFNAMSIZ); - if ((ioctl(skfd, SIOCBONDRELEASE, &ifr) < 0) && - (ioctl(skfd, BOND_RELEASE_OLD, &ifr) < 0)) { - saved_errno = errno; - v_print("Master '%s': Error: SIOCBONDRELEASE failed: %s\n", - master_ifname, strerror(saved_errno)); - return 1; - } else if (abi_ver < 1) { - /* The driver is using an old ABI, so we'll set the interface - * down to avoid any conflicts due to same MAC/IP - */ - res = set_if_down(slave_ifname, slave_flags.ifr_flags); - if (res) { - fprintf(stderr, - "Slave '%s': Error: bring interface " - "down failed\n", - slave_ifname); - } - } - - /* set to default mtu */ - set_slave_mtu(slave_ifname, 1500); - - return res; -} - -static int get_if_settings(char *ifname, struct dev_ifr ifra[]) -{ - int i; - int res = 0; - - for (i = 0; ifra[i].req_ifr; i++) { - strncpy(ifra[i].req_ifr->ifr_name, ifname, IFNAMSIZ); - res = ioctl(skfd, ifra[i].req_type, ifra[i].req_ifr); - if (res < 0) { - saved_errno = errno; - v_print("Interface '%s': Error: %s failed: %s\n", - ifname, ifra[i].req_name, - strerror(saved_errno)); - - return saved_errno; - } - } - - return 0; -} - -static int get_slave_flags(char *slave_ifname) -{ - int res = 0; - - strncpy(slave_flags.ifr_name, slave_ifname, IFNAMSIZ); - res = ioctl(skfd, SIOCGIFFLAGS, &slave_flags); - if (res < 0) { - saved_errno = errno; - v_print("Slave '%s': Error: SIOCGIFFLAGS failed: %s\n", - slave_ifname, strerror(saved_errno)); - } else { - v_print("Slave %s: flags %04X.\n", - slave_ifname, slave_flags.ifr_flags); - } - - return res; -} - -static int set_master_hwaddr(char *master_ifname, struct sockaddr *hwaddr) -{ - unsigned char *addr = (unsigned char *)hwaddr->sa_data; - struct ifreq ifr; - int res = 0; - - strncpy(ifr.ifr_name, master_ifname, IFNAMSIZ); - memcpy(&(ifr.ifr_hwaddr), hwaddr, sizeof(struct sockaddr)); - res = ioctl(skfd, SIOCSIFHWADDR, &ifr); - if (res < 0) { - saved_errno = errno; - v_print("Master '%s': Error: SIOCSIFHWADDR failed: %s\n", - master_ifname, strerror(saved_errno)); - return res; - } else { - v_print("Master '%s': hardware address set to " - "%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x.\n", - master_ifname, addr[0], addr[1], addr[2], - addr[3], addr[4], addr[5]); - } - - return res; -} - -static int set_slave_hwaddr(char *slave_ifname, struct sockaddr *hwaddr) -{ - unsigned char *addr = (unsigned char *)hwaddr->sa_data; - struct ifreq ifr; - int res = 0; - - strncpy(ifr.ifr_name, slave_ifname, IFNAMSIZ); - memcpy(&(ifr.ifr_hwaddr), hwaddr, sizeof(struct sockaddr)); - res = ioctl(skfd, SIOCSIFHWADDR, &ifr); - if (res < 0) { - saved_errno = errno; - - v_print("Slave '%s': Error: SIOCSIFHWADDR failed: %s\n", - slave_ifname, strerror(saved_errno)); - - if (saved_errno == EBUSY) { - v_print(" The device is busy: it must be idle " - "before running this command.\n"); - } else if (saved_errno == EOPNOTSUPP) { - v_print(" The device does not support setting " - "the MAC address.\n" - " Your kernel likely does not support slave " - "devices.\n"); - } else if (saved_errno == EINVAL) { - v_print(" The device's address type does not match " - "the master's address type.\n"); - } - return res; - } else { - v_print("Slave '%s': hardware address set to " - "%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x.\n", - slave_ifname, addr[0], addr[1], addr[2], - addr[3], addr[4], addr[5]); - } - - return res; -} - -static int set_slave_mtu(char *slave_ifname, int mtu) -{ - struct ifreq ifr; - int res = 0; - - ifr.ifr_mtu = mtu; - strncpy(ifr.ifr_name, slave_ifname, IFNAMSIZ); - - res = ioctl(skfd, SIOCSIFMTU, &ifr); - if (res < 0) { - saved_errno = errno; - v_print("Slave '%s': Error: SIOCSIFMTU failed: %s\n", - slave_ifname, strerror(saved_errno)); - } else { - v_print("Slave '%s': MTU set to %d.\n", slave_ifname, mtu); - } - - return res; -} - -static int set_if_flags(char *ifname, short flags) -{ - struct ifreq ifr; - int res = 0; - - ifr.ifr_flags = flags; - strncpy(ifr.ifr_name, ifname, IFNAMSIZ); - - res = ioctl(skfd, SIOCSIFFLAGS, &ifr); - if (res < 0) { - saved_errno = errno; - v_print("Interface '%s': Error: SIOCSIFFLAGS failed: %s\n", - ifname, strerror(saved_errno)); - } else { - v_print("Interface '%s': flags set to %04X.\n", ifname, flags); - } - - return res; -} - -static int set_if_up(char *ifname, short flags) -{ - return set_if_flags(ifname, flags | IFF_UP); -} - -static int set_if_down(char *ifname, short flags) -{ - return set_if_flags(ifname, flags & ~IFF_UP); -} - -static int clear_if_addr(char *ifname) -{ - struct ifreq ifr; - int res = 0; - - strncpy(ifr.ifr_name, ifname, IFNAMSIZ); - ifr.ifr_addr.sa_family = AF_INET; - memset(ifr.ifr_addr.sa_data, 0, sizeof(ifr.ifr_addr.sa_data)); - - res = ioctl(skfd, SIOCSIFADDR, &ifr); - if (res < 0) { - saved_errno = errno; - v_print("Interface '%s': Error: SIOCSIFADDR failed: %s\n", - ifname, strerror(saved_errno)); - } else { - v_print("Interface '%s': address cleared\n", ifname); - } - - return res; -} - -static int set_if_addr(char *master_ifname, char *slave_ifname) -{ - struct ifreq ifr; - int res; - unsigned char *ipaddr; - int i; - struct { - char *req_name; - char *desc; - int g_ioctl; - int s_ioctl; - } ifra[] = { - {"IFADDR", "addr", SIOCGIFADDR, SIOCSIFADDR}, - {"DSTADDR", "destination addr", SIOCGIFDSTADDR, SIOCSIFDSTADDR}, - {"BRDADDR", "broadcast addr", SIOCGIFBRDADDR, SIOCSIFBRDADDR}, - {"NETMASK", "netmask", SIOCGIFNETMASK, SIOCSIFNETMASK}, - {NULL, NULL, 0, 0}, - }; - - for (i = 0; ifra[i].req_name; i++) { - strncpy(ifr.ifr_name, master_ifname, IFNAMSIZ); - res = ioctl(skfd, ifra[i].g_ioctl, &ifr); - if (res < 0) { - int saved_errno = errno; - - v_print("Interface '%s': Error: SIOCG%s failed: %s\n", - master_ifname, ifra[i].req_name, - strerror(saved_errno)); - - ifr.ifr_addr.sa_family = AF_INET; - memset(ifr.ifr_addr.sa_data, 0, - sizeof(ifr.ifr_addr.sa_data)); - } - - strncpy(ifr.ifr_name, slave_ifname, IFNAMSIZ); - res = ioctl(skfd, ifra[i].s_ioctl, &ifr); - if (res < 0) { - int saved_errno = errno; - - v_print("Interface '%s': Error: SIOCS%s failed: %s\n", - slave_ifname, ifra[i].req_name, - strerror(saved_errno)); - - } - - ipaddr = (unsigned char *)ifr.ifr_addr.sa_data; - v_print("Interface '%s': set IP %s to %d.%d.%d.%d\n", - slave_ifname, ifra[i].desc, - ipaddr[0], ipaddr[1], ipaddr[2], ipaddr[3]); - } - - return 0; -} - -/* - * Local variables: - * version-control: t - * kept-new-versions: 5 - * c-indent-level: 4 - * c-basic-offset: 4 - * tab-width: 4 - * compile-command: "gcc -Wall -Wstrict-prototypes -O -I/usr/src/linux/include ifenslave.c -o ifenslave" - * End: - */ - -- cgit v1.2.3 From 76723bca2802eb80990a5fefa179662e2e561d66 Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Wed, 29 May 2013 09:32:48 +0000 Subject: net: mv643xx_eth: add DT parsing support This adds device tree parsing support for the shared driver of mv643xx_eth. As the bindings are slightly different from current PPC bindings new binding documentation is also added. Following PPC-style device setup, the shared driver now also adds port platform_devices and sets up port platform_data. Signed-off-by: Sebastian Hesselbarth Signed-off-by: David S. Miller --- .../devicetree/bindings/net/marvell-orion-net.txt | 85 ++++++++++++++++++++++ 1 file changed, 85 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/marvell-orion-net.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/net/marvell-orion-net.txt b/Documentation/devicetree/bindings/net/marvell-orion-net.txt new file mode 100644 index 000000000000..a73b79f227e1 --- /dev/null +++ b/Documentation/devicetree/bindings/net/marvell-orion-net.txt @@ -0,0 +1,85 @@ +Marvell Orion/Discovery ethernet controller +============================================= + +The Marvell Discovery ethernet controller can be found on Marvell Orion SoCs +(Kirkwood, Dove, Orion5x, and Discovery Innovation) and as part of Marvell +Discovery system controller chips (mv64[345]60). + +The Discovery ethernet controller is described with two levels of nodes. The +first level describes the ethernet controller itself and the second level +describes up to 3 ethernet port nodes within that controller. The reason for +the multiple levels is that the port registers are interleaved within a single +set of controller registers. Each port node describes port-specific properties. + +Note: The above separation is only true for Discovery system controllers. +For Orion SoCs we stick to the separation, although there each controller has +only one port associated. Multiple ports are implemented as multiple single-port +controllers. As Kirkwood has some issues with proper initialization after reset, +an extra compatible string is added for it. + +* Ethernet controller node + +Required controller properties: + - #address-cells: shall be 1. + - #size-cells: shall be 0. + - compatible: shall be one of "marvell,orion-eth", "marvell,kirkwood-eth". + - reg: address and length of the controller registers. + +Optional controller properties: + - clocks: phandle reference to the controller clock. + - marvell,tx-checksum-limit: max tx packet size for hardware checksum. + +* Ethernet port node + +Required port properties: + - device_type: shall be "network". + - compatible: shall be one of "marvell,orion-eth-port", + "marvell,kirkwood-eth-port". + - reg: port number relative to ethernet controller, shall be 0, 1, or 2. + - interrupts: port interrupt. + - local-mac-address: 6 bytes MAC address. + +Optional port properties: + - marvell,tx-queue-size: size of the transmit ring buffer. + - marvell,tx-sram-addr: address of transmit descriptor buffer located in SRAM. + - marvell,tx-sram-size: size of transmit descriptor buffer located in SRAM. + - marvell,rx-queue-size: size of the receive ring buffer. + - marvell,rx-sram-addr: address of receive descriptor buffer located in SRAM. + - marvell,rx-sram-size: size of receive descriptor buffer located in SRAM. + +and + + - phy-handle: phandle reference to ethernet PHY. + +or + + - speed: port speed if no PHY connected. + - duplex: port mode if no PHY connected. + +* Node example: + +mdio-bus { + ... + ethphy: ethernet-phy@8 { + device_type = "ethernet-phy"; + ... + }; +}; + +eth: ethernet-controller@72000 { + compatible = "marvell,orion-eth"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72000 0x2000>; + clocks = <&gate_clk 2>; + marvell,tx-checksum-limit = <1600>; + + ethernet@0 { + device_type = "network"; + compatible = "marvell,orion-eth-port"; + reg = <0>; + interrupts = <29>; + phy-handle = <ðphy>; + local-mac-address = [00 00 00 00 00 00]; + }; +}; -- cgit v1.2.3 From 492205050d77bcc4f85f6dc0da6b6fdbca1d6ff7 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Thu, 30 May 2013 03:49:20 +0000 Subject: net: Add EMAC ethernet driver found on Allwinner A10 SoC's The Allwinner A10 has an ethernet controller that seem to be developped internally by them. The exact feature set of this controller is unknown, since there is no public documentation for this IP, and this driver is mostly the one published by Allwinner that has been heavily cleaned up. Signed-off-by: Stefan Roese Signed-off-by: Maxime Ripard Tested-by: Richard Genoud Signed-off-by: David S. Miller --- .../bindings/net/allwinner,sun4i-emac.txt | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt b/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt new file mode 100644 index 000000000000..b90bfcd138ff --- /dev/null +++ b/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt @@ -0,0 +1,22 @@ +* Allwinner EMAC ethernet controller + +Required properties: +- compatible: should be "allwinner,sun4i-emac". +- reg: address and length of the register set for the device. +- interrupts: interrupt for the device +- phy: A phandle to a phy node defining the PHY address (as the reg + property, a single integer). +- clocks: A phandle to the reference clock for this device + +Optional properties: +- (local-)mac-address: mac address to be used by this driver + +Example: + +emac: ethernet@01c0b000 { + compatible = "allwinner,sun4i-emac"; + reg = <0x01c0b000 0x1000>; + interrupts = <55>; + clocks = <&ahb_gates 17>; + phy = <&phy0>; +}; -- cgit v1.2.3 From 4bdcb1dd9feb03608e12cfa46aba385035af8ea5 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Thu, 30 May 2013 03:49:21 +0000 Subject: net: Add MDIO bus driver for the Allwinner EMAC This patch adds a separate driver for the MDIO interface of the Allwinner ethernet controllers. Signed-off-by: Maxime Ripard Tested-by: Richard Genoud Signed-off-by: David S. Miller --- .../bindings/net/allwinner,sun4i-mdio.txt | 26 ++++++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt b/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt new file mode 100644 index 000000000000..00b9f9a3ec1d --- /dev/null +++ b/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt @@ -0,0 +1,26 @@ +* Allwinner A10 MDIO Ethernet Controller interface + +Required properties: +- compatible: should be "allwinner,sun4i-mdio". +- reg: address and length of the register set for the device. + +Optional properties: +- phy-supply: phandle to a regulator if the PHY needs one + +Example at the SoC level: +mdio@01c0b080 { + compatible = "allwinner,sun4i-mdio"; + reg = <0x01c0b080 0x14>; + #address-cells = <1>; + #size-cells = <0>; +}; + +And at the board level: + +mdio@01c0b080 { + phy-supply = <®_emac_3v3>; + + phy0: ethernet-phy@0 { + reg = <0>; + }; +}; -- cgit v1.2.3 From c5ceea7a2813fecded01567383cca4d6855164ab Mon Sep 17 00:00:00 2001 From: Mugunthan V N Date: Mon, 3 Jun 2013 20:10:10 +0000 Subject: drivers: net: ethernet: cpsw: add phy-mode support to cpsw driver Adding phy-mode support to cpsw driver and updating the cpsw binding documentation. Signed-off-by: Mugunthan V N Signed-off-by: David S. Miller --- Documentation/devicetree/bindings/net/cpsw.txt | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt index 4f2ca6b4a182..05d660e4ac64 100644 --- a/Documentation/devicetree/bindings/net/cpsw.txt +++ b/Documentation/devicetree/bindings/net/cpsw.txt @@ -28,6 +28,8 @@ Optional properties: Slave Properties: Required properties: - phy_id : Specifies slave phy id +- phy-mode : The interface between the SoC and the PHY (a string + that of_get_phy_mode() can understand) - mac-address : Specifies slave MAC address Optional properties: @@ -58,11 +60,13 @@ Examples: cpts_clock_shift = <29>; cpsw_emac0: slave@0 { phy_id = <&davinci_mdio>, <0>; + phy-mode = "rgmii-txid"; /* Filled in by U-Boot */ mac-address = [ 00 00 00 00 00 00 ]; }; cpsw_emac1: slave@1 { phy_id = <&davinci_mdio>, <1>; + phy-mode = "rgmii-txid"; /* Filled in by U-Boot */ mac-address = [ 00 00 00 00 00 00 ]; }; @@ -84,11 +88,13 @@ Examples: cpts_clock_shift = <29>; cpsw_emac0: slave@0 { phy_id = <&davinci_mdio>, <0>; + phy-mode = "rgmii-txid"; /* Filled in by U-Boot */ mac-address = [ 00 00 00 00 00 00 ]; }; cpsw_emac1: slave@1 { phy_id = <&davinci_mdio>, <1>; + phy-mode = "rgmii-txid"; /* Filled in by U-Boot */ mac-address = [ 00 00 00 00 00 00 ]; }; -- cgit v1.2.3 From 780b40df12cf0161d8ccc5381940e04584793933 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 5 Jun 2013 09:32:50 +0200 Subject: wireless: fix kernel-doc Some kernel-doc fixes for forgotten fields and renamed things. Signed-off-by: Johannes Berg --- Documentation/DocBook/80211.tmpl | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) (limited to 'Documentation') diff --git a/Documentation/DocBook/80211.tmpl b/Documentation/DocBook/80211.tmpl index ebe89694cf81..49267ea97568 100644 --- a/Documentation/DocBook/80211.tmpl +++ b/Documentation/DocBook/80211.tmpl @@ -127,12 +127,11 @@ !Finclude/net/cfg80211.h cfg80211_ibss_params !Finclude/net/cfg80211.h cfg80211_connect_params !Finclude/net/cfg80211.h cfg80211_pmksa -!Finclude/net/cfg80211.h cfg80211_send_rx_auth -!Finclude/net/cfg80211.h cfg80211_send_auth_timeout -!Finclude/net/cfg80211.h cfg80211_send_rx_assoc -!Finclude/net/cfg80211.h cfg80211_send_assoc_timeout -!Finclude/net/cfg80211.h cfg80211_send_deauth -!Finclude/net/cfg80211.h cfg80211_send_disassoc +!Finclude/net/cfg80211.h cfg80211_rx_mlme_mgmt +!Finclude/net/cfg80211.h cfg80211_auth_timeout +!Finclude/net/cfg80211.h cfg80211_rx_assoc_resp +!Finclude/net/cfg80211.h cfg80211_assoc_timeout +!Finclude/net/cfg80211.h cfg80211_tx_mlme_mgmt !Finclude/net/cfg80211.h cfg80211_ibss_joined !Finclude/net/cfg80211.h cfg80211_connect_result !Finclude/net/cfg80211.h cfg80211_roamed -- cgit v1.2.3 From d70a3f887a38cb0acc7233a1d05f15c2b6e0be2b Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Thu, 6 Jun 2013 14:08:13 +0000 Subject: doc: packet: simplify tpacket example code This patch simplifies the tpacket_v3 example code a bit by getting rid of unecessary macro wrappers, removing some debugging code so that it is more to the point, and also adds a header comment. Now this example code is the very minimum one needs to start from when dealing with tpacket_v3 and ~100 lines smaller than before. Signed-off-by: Daniel Borkmann Signed-off-by: David S. Miller --- Documentation/networking/packet_mmap.txt | 133 +++++++------------------------ 1 file changed, 28 insertions(+), 105 deletions(-) (limited to 'Documentation') diff --git a/Documentation/networking/packet_mmap.txt b/Documentation/networking/packet_mmap.txt index 23dd80e82b8e..8572796b1eb6 100644 --- a/Documentation/networking/packet_mmap.txt +++ b/Documentation/networking/packet_mmap.txt @@ -704,6 +704,12 @@ So it seems to be a good candidate to be used with packet fanout. Minimal example code by Daniel Borkmann based on Chetan Loke's lolpcap (compile it with gcc -Wall -O2 blob.c, and try things like "./a.out eth0", etc.): +/* Written from scratch, but kernel-to-user space API usage + * dissected from lolpcap: + * Copyright 2011, Chetan Loke + * License: GPL, version 2.0 + */ + #include #include #include @@ -722,27 +728,6 @@ it with gcc -Wall -O2 blob.c, and try things like "./a.out eth0", etc.): #include #include -#define BLOCK_SIZE (1 << 22) -#define FRAME_SIZE 2048 - -#define NUM_BLOCKS 64 -#define NUM_FRAMES ((BLOCK_SIZE * NUM_BLOCKS) / FRAME_SIZE) - -#define BLOCK_RETIRE_TOV_IN_MS 64 -#define BLOCK_PRIV_AREA_SZ 13 - -#define ALIGN_8(x) (((x) + 8 - 1) & ~(8 - 1)) - -#define BLOCK_STATUS(x) ((x)->h1.block_status) -#define BLOCK_NUM_PKTS(x) ((x)->h1.num_pkts) -#define BLOCK_O2FP(x) ((x)->h1.offset_to_first_pkt) -#define BLOCK_LEN(x) ((x)->h1.blk_len) -#define BLOCK_SNUM(x) ((x)->h1.seq_num) -#define BLOCK_O2PRIV(x) ((x)->offset_to_priv) -#define BLOCK_PRIV(x) ((void *) ((uint8_t *) (x) + BLOCK_O2PRIV(x))) -#define BLOCK_HDR_LEN (ALIGN_8(sizeof(struct block_desc))) -#define BLOCK_PLUS_PRIV(sz_pri) (BLOCK_HDR_LEN + ALIGN_8((sz_pri))) - #ifndef likely # define likely(x) __builtin_expect(!!(x), 1) #endif @@ -765,7 +750,7 @@ struct ring { static unsigned long packets_total = 0, bytes_total = 0; static sig_atomic_t sigint = 0; -void sighandler(int num) +static void sighandler(int num) { sigint = 1; } @@ -774,6 +759,8 @@ static int setup_socket(struct ring *ring, char *netdev) { int err, i, fd, v = TPACKET_V3; struct sockaddr_ll ll; + unsigned int blocksiz = 1 << 22, framesiz = 1 << 11; + unsigned int blocknum = 64; fd = socket(AF_PACKET, SOCK_RAW, htons(ETH_P_ALL)); if (fd < 0) { @@ -788,13 +775,12 @@ static int setup_socket(struct ring *ring, char *netdev) } memset(&ring->req, 0, sizeof(ring->req)); - ring->req.tp_block_size = BLOCK_SIZE; - ring->req.tp_frame_size = FRAME_SIZE; - ring->req.tp_block_nr = NUM_BLOCKS; - ring->req.tp_frame_nr = NUM_FRAMES; - ring->req.tp_retire_blk_tov = BLOCK_RETIRE_TOV_IN_MS; - ring->req.tp_sizeof_priv = BLOCK_PRIV_AREA_SZ; - ring->req.tp_feature_req_word |= TP_FT_REQ_FILL_RXHASH; + ring->req.tp_block_size = blocksiz; + ring->req.tp_frame_size = framesiz; + ring->req.tp_block_nr = blocknum; + ring->req.tp_frame_nr = (blocksiz * blocknum) / framesiz; + ring->req.tp_retire_blk_tov = 60; + ring->req.tp_feature_req_word = TP_FT_REQ_FILL_RXHASH; err = setsockopt(fd, SOL_PACKET, PACKET_RX_RING, &ring->req, sizeof(ring->req)); @@ -804,8 +790,7 @@ static int setup_socket(struct ring *ring, char *netdev) } ring->map = mmap(NULL, ring->req.tp_block_size * ring->req.tp_block_nr, - PROT_READ | PROT_WRITE, MAP_SHARED | MAP_LOCKED, - fd, 0); + PROT_READ | PROT_WRITE, MAP_SHARED | MAP_LOCKED, fd, 0); if (ring->map == MAP_FAILED) { perror("mmap"); exit(1); @@ -835,58 +820,6 @@ static int setup_socket(struct ring *ring, char *netdev) return fd; } -#ifdef __checked -static uint64_t prev_block_seq_num = 0; - -void assert_block_seq_num(struct block_desc *pbd) -{ - if (unlikely(prev_block_seq_num + 1 != BLOCK_SNUM(pbd))) { - printf("prev_block_seq_num:%"PRIu64", expected seq:%"PRIu64" != " - "actual seq:%"PRIu64"\n", prev_block_seq_num, - prev_block_seq_num + 1, (uint64_t) BLOCK_SNUM(pbd)); - exit(1); - } - - prev_block_seq_num = BLOCK_SNUM(pbd); -} - -static void assert_block_len(struct block_desc *pbd, uint32_t bytes, int block_num) -{ - if (BLOCK_NUM_PKTS(pbd)) { - if (unlikely(bytes != BLOCK_LEN(pbd))) { - printf("block:%u with %upackets, expected len:%u != actual len:%u\n", - block_num, BLOCK_NUM_PKTS(pbd), bytes, BLOCK_LEN(pbd)); - exit(1); - } - } else { - if (unlikely(BLOCK_LEN(pbd) != BLOCK_PLUS_PRIV(BLOCK_PRIV_AREA_SZ))) { - printf("block:%u, expected len:%lu != actual len:%u\n", - block_num, BLOCK_HDR_LEN, BLOCK_LEN(pbd)); - exit(1); - } - } -} - -static void assert_block_header(struct block_desc *pbd, const int block_num) -{ - uint32_t block_status = BLOCK_STATUS(pbd); - - if (unlikely((block_status & TP_STATUS_USER) == 0)) { - printf("block:%u, not in TP_STATUS_USER\n", block_num); - exit(1); - } - - assert_block_seq_num(pbd); -} -#else -static inline void assert_block_header(struct block_desc *pbd, const int block_num) -{ -} -static void assert_block_len(struct block_desc *pbd, uint32_t bytes, int block_num) -{ -} -#endif - static void display(struct tpacket3_hdr *ppd) { struct ethhdr *eth = (struct ethhdr *) ((uint8_t *) ppd + ppd->tp_mac); @@ -916,37 +849,27 @@ static void display(struct tpacket3_hdr *ppd) static void walk_block(struct block_desc *pbd, const int block_num) { - int num_pkts = BLOCK_NUM_PKTS(pbd), i; + int num_pkts = pbd->h1.num_pkts, i; unsigned long bytes = 0; - unsigned long bytes_with_padding = BLOCK_PLUS_PRIV(BLOCK_PRIV_AREA_SZ); struct tpacket3_hdr *ppd; - assert_block_header(pbd, block_num); - - ppd = (struct tpacket3_hdr *) ((uint8_t *) pbd + BLOCK_O2FP(pbd)); + ppd = (struct tpacket3_hdr *) ((uint8_t *) pbd + + pbd->h1.offset_to_first_pkt); for (i = 0; i < num_pkts; ++i) { bytes += ppd->tp_snaplen; - if (ppd->tp_next_offset) - bytes_with_padding += ppd->tp_next_offset; - else - bytes_with_padding += ALIGN_8(ppd->tp_snaplen + ppd->tp_mac); - display(ppd); - ppd = (struct tpacket3_hdr *) ((uint8_t *) ppd + ppd->tp_next_offset); - __sync_synchronize(); + ppd = (struct tpacket3_hdr *) ((uint8_t *) ppd + + ppd->tp_next_offset); } - assert_block_len(pbd, bytes_with_padding, block_num); - packets_total += num_pkts; bytes_total += bytes; } -void flush_block(struct block_desc *pbd) +static void flush_block(struct block_desc *pbd) { - BLOCK_STATUS(pbd) = TP_STATUS_KERNEL; - __sync_synchronize(); + pbd->h1.block_status = TP_STATUS_KERNEL; } static void teardown_socket(struct ring *ring, int fd) @@ -962,7 +885,7 @@ int main(int argc, char **argp) socklen_t len; struct ring ring; struct pollfd pfd; - unsigned int block_num = 0; + unsigned int block_num = 0, blocks = 64; struct block_desc *pbd; struct tpacket_stats_v3 stats; @@ -984,15 +907,15 @@ int main(int argc, char **argp) while (likely(!sigint)) { pbd = (struct block_desc *) ring.rd[block_num].iov_base; -retry_block: - if ((BLOCK_STATUS(pbd) & TP_STATUS_USER) == 0) { + + if ((pbd->h1.block_status & TP_STATUS_USER) == 0) { poll(&pfd, 1, -1); - goto retry_block; + continue; } walk_block(pbd, block_num); flush_block(pbd); - block_num = (block_num + 1) % NUM_BLOCKS; + block_num = (block_num + 1) % blocks; } len = sizeof(stats); -- cgit v1.2.3 From e8b265e8ba322a01bb746504f6f64b5506853eac Mon Sep 17 00:00:00 2001 From: Rami Rosen Date: Fri, 7 Jun 2013 20:16:19 +0000 Subject: doc:networking: Fix default value (icmp_ignore_bogus_error_responses). This patch fixes icmp_ignore_bogus_error_responses default value to be 1 instead of FALSE. It is initialized to 1 in icmp_sk_init(). Signed-off-by: Rami Rosen Signed-off-by: David S. Miller --- Documentation/networking/ip-sysctl.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index 398d0fb1dd0e..9cea5d3b3c50 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -729,7 +729,7 @@ icmp_ignore_bogus_error_responses - BOOLEAN frames. Such violations are normally logged via a kernel warning. If this is set to TRUE, the kernel will not give such warnings, which will avoid log file clutter. - Default: FALSE + Default: 1 icmp_errors_use_inbound_ifaddr - BOOLEAN -- cgit v1.2.3 From 060212928670593fb89243640bf05cf89560b023 Mon Sep 17 00:00:00 2001 From: Eliezer Tamir Date: Mon, 10 Jun 2013 11:39:50 +0300 Subject: net: add low latency socket poll Adds an ndo_ll_poll method and the code that supports it. This method can be used by low latency applications to busy-poll Ethernet device queues directly from the socket code. sysctl_net_ll_poll controls how many microseconds to poll. Default is zero (disabled). Individual protocol support will be added by subsequent patches. Signed-off-by: Alexander Duyck Signed-off-by: Jesse Brandeburg Signed-off-by: Eliezer Tamir Acked-by: Eric Dumazet Tested-by: Willem de Bruijn Signed-off-by: David S. Miller --- Documentation/sysctl/net.txt | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'Documentation') diff --git a/Documentation/sysctl/net.txt b/Documentation/sysctl/net.txt index c1f8640c2fc8..85ab72dcdc3c 100644 --- a/Documentation/sysctl/net.txt +++ b/Documentation/sysctl/net.txt @@ -50,6 +50,13 @@ The maximum number of packets that kernel can handle on a NAPI interrupt, it's a Per-CPU variable. Default: 64 +low_latency_poll +---------------- +Low latency busy poll timeout. (needs CONFIG_NET_LL_RX_POLL) +Approximate time in us to spin waiting for packets on the device queue. +Recommended value is 50. May increase power usage. +Default: 0 (off) + rmem_default ------------ -- cgit v1.2.3 From e3d73bcedfdf66d21349fee00241b0931d28a943 Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Tue, 11 Jun 2013 18:54:39 +0800 Subject: net: add doc for ip_early_demux sysctl commit 6648bd7e0e62c0c8c03b (ipv4: Add sysctl knob to control early socket demux) introduced such sysctl, but forgot to add doc into Documentation/networking/ip-sysctl.txt. This patch adds it. Basically I grab the doc from the description of commit 41063e9dd11956f2d285 (ipv4: Early TCP socket demux.) and the above commit. Cc: Eric Dumazet Cc: Alexander Duyck Cc: David S. Miller Signed-off-by: Cong Wang Signed-off-by: David S. Miller --- Documentation/networking/ip-sysctl.txt | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'Documentation') diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index 9cea5d3b3c50..36e5a402ed0e 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -685,6 +685,15 @@ ip_dynaddr - BOOLEAN occurs. Default: 0 +ip_early_demux - BOOLEAN + Optimize input packet processing down to one demux for + certain kinds of local sockets. Currently we only do this + for established TCP sockets. + + It may add an additional cost for pure routing workloads that + reduces overall throughput, in such case you should disable it. + Default: 1 + icmp_echo_ignore_all - BOOLEAN If set non-zero, then the kernel will ignore all ICMP ECHO requests sent to it. -- cgit v1.2.3 From cc79dd1ba9c1021c2ac6ae200a65ec38ee8db351 Mon Sep 17 00:00:00 2001 From: Ying Xue Date: Mon, 17 Jun 2013 10:54:37 -0400 Subject: tipc: change socket buffer overflow control to respect sk_rcvbuf As per feedback from the netdev community, we change the buffer overflow protection algorithm in receiving sockets so that it always respects the nominal upper limit set in sk_rcvbuf. Instead of scaling up from a small sk_rcvbuf value, which leads to violation of the configured sk_rcvbuf limit, we now calculate the weighted per-message limit by scaling down from a much bigger value, still in the same field, according to the importance priority of the received message. To allow for administrative tunability of the socket receive buffer size, we create a tipc_rmem sysctl variable to allow the user to configure an even bigger value via sysctl command. It is a size of three (min/default/max) to be consistent with things like tcp_rmem. By default, the value initialized in tipc_rmem[1] is equal to the receive socket size needed by a TIPC_CRITICAL_IMPORTANCE message. This value is also set as the default value of sk_rcvbuf. Originally-by: Jon Maloy Cc: Neil Horman Cc: Jon Maloy [Ying: added sysctl variation to Jon's original patch] Signed-off-by: Ying Xue [PG: don't compile sysctl.c if not config'd; add Documentation] Signed-off-by: Paul Gortmaker Signed-off-by: David S. Miller --- Documentation/sysctl/net.txt | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/sysctl/net.txt b/Documentation/sysctl/net.txt index 85ab72dcdc3c..5369879eafe2 100644 --- a/Documentation/sysctl/net.txt +++ b/Documentation/sysctl/net.txt @@ -26,7 +26,7 @@ Table : Subdirectories in /proc/sys/net ipv4 IP version 4 x25 X.25 protocol ipx IPX token-ring IBM token ring bridge Bridging decnet DEC net - ipv6 IP version 6 + ipv6 IP version 6 tipc TIPC .............................................................................. 1. /proc/sys/net/core - Network core options @@ -207,3 +207,18 @@ IPX. The /proc/net/ipx_route table holds a list of IPX routes. For each route it gives the destination network, the router node (or Directly) and the network address of the router (or Connected) for internal networks. + +6. TIPC +------------------------------------------------------- + +The TIPC protocol now has a tunable for the receive memory, similar to the +tcp_rmem - i.e. a vector of 3 INTEGERs: (min, default, max) + + # cat /proc/sys/net/tipc/tipc_rmem + 4252725 34021800 68043600 + # + +The max value is set to CONN_OVERLOAD_LIMIT, and the default and min values +are scaled (shifted) versions of that same value. Note that the min value +is not at this point in time used in any meaningful way, but the triplet is +preserved in order to be consistent with things like tcp_rmem. -- cgit v1.2.3 From e4f2379db6c6823c5d4a4c2c912df00c65de51d7 Mon Sep 17 00:00:00 2001 From: Alexey Brodkin Date: Mon, 24 Jun 2013 09:54:27 +0400 Subject: ethernet/arc/arc_emac - Add new driver Driver for non-standard on-chip ethernet device ARC EMAC 10/100, instantiated in some legacy ARC (Synopsys) FPGA Boards such as ARCAngel4/ML50x. Signed-off-by: Alexey Brodkin Cc: Andy Shevchenko Cc: Francois Romieu Cc: Joe Perches Cc: Vineet Gupta Cc: Mischa Jonker Cc: Arnd Bergmann Cc: Grant Likely Cc: Rob Herring Cc: Paul Gortmaker Cc: "David S. Miller" Cc: linux-kernel@vger.kernel.org Cc: devicetree-discuss@lists.ozlabs.org Cc: Florian Fainelli Cc: David Laight Signed-off-by: David S. Miller --- Documentation/devicetree/bindings/net/arc_emac.txt | 38 ++++++++++++++++++++++ 1 file changed, 38 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/arc_emac.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/net/arc_emac.txt b/Documentation/devicetree/bindings/net/arc_emac.txt new file mode 100644 index 000000000000..bcbc3f009158 --- /dev/null +++ b/Documentation/devicetree/bindings/net/arc_emac.txt @@ -0,0 +1,38 @@ +* Synopsys ARC EMAC 10/100 Ethernet driver (EMAC) + +Required properties: +- compatible: Should be "snps,arc-emac" +- reg: Address and length of the register set for the device +- interrupts: Should contain the EMAC interrupts +- clock-frequency: CPU frequency. It is needed to calculate and set polling +period of EMAC. +- max-speed: Maximum supported data-rate in Mbit/s. In some HW configurations +bandwidth of external memory controller might be a limiting factor. That's why +it's required to specify which data-rate is supported on current SoC or FPGA. +For example if only 10 Mbit/s is supported (10BASE-T) set "10". If 100 Mbit/s is +supported (100BASE-TX) set "100". +- phy: PHY device attached to the EMAC via MDIO bus + +Child nodes of the driver are the individual PHY devices connected to the +MDIO bus. They must have a "reg" property given the PHY address on the MDIO bus. + +Optional properties: +- mac-address: 6 bytes, mac address + +Examples: + + ethernet@c0fc2000 { + compatible = "snps,arc-emac"; + reg = <0xc0fc2000 0x3c>; + interrupts = <6>; + mac-address = [ 00 11 22 33 44 55 ]; + clock-frequency = <80000000>; + max-speed = <100>; + phy = <&phy0>; + + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@0 { + reg = <1>; + }; + }; -- cgit v1.2.3 From 2d48d67fa8cd129ea85ea02d91b4a793286866f8 Mon Sep 17 00:00:00 2001 From: Eliezer Tamir Date: Mon, 24 Jun 2013 10:28:03 +0300 Subject: net: poll/select low latency socket support select/poll busy-poll support. Split sysctl value into two separate ones, one for read and one for poll. updated Documentation/sysctl/net.txt Add a new poll flag POLL_LL. When this flag is set, sock_poll will call sk_poll_ll if possible. sock_poll sets this flag in its return value to indicate to select/poll when a socket that can busy poll is found. When poll/select have nothing to report, call the low-level sock_poll again until we are out of time or we find something. Once the system call finds something, it stops setting POLL_LL, so it can return the result to the user ASAP. Signed-off-by: Eliezer Tamir Signed-off-by: David S. Miller --- Documentation/sysctl/net.txt | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/sysctl/net.txt b/Documentation/sysctl/net.txt index 5369879eafe2..e658bbfb641f 100644 --- a/Documentation/sysctl/net.txt +++ b/Documentation/sysctl/net.txt @@ -50,13 +50,27 @@ The maximum number of packets that kernel can handle on a NAPI interrupt, it's a Per-CPU variable. Default: 64 -low_latency_poll +low_latency_read ---------------- -Low latency busy poll timeout. (needs CONFIG_NET_LL_RX_POLL) +Low latency busy poll timeout for socket reads. (needs CONFIG_NET_LL_RX_POLL) Approximate time in us to spin waiting for packets on the device queue. +This sets the default value of the SO_LL socket option. +Can be set or overridden per socket by setting socket option SO_LL. Recommended value is 50. May increase power usage. Default: 0 (off) +low_latency_poll +---------------- +Low latency busy poll timeout for poll and select. (needs CONFIG_NET_LL_RX_POLL) +Approximate time in us to spin waiting for packets on the device queue. +Recommended value depends on the number of sockets you poll on. +For several sockets 50, for several hundreds 100. +For more than that you probably want to use epoll. +Note that only sockets with SO_LL set will be busy polled, so you want to either +selectively set SO_LL on those sockets or set sysctl.net.low_latency_read globally. +May increase power usage. +Default: 0 (off) + rmem_default ------------ -- cgit v1.2.3 From 762375766143aba42e74713f8364b4953c40a354 Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Mon, 24 Jun 2013 19:46:54 +0800 Subject: doc: fix some syntax errors in netlink mmap sample code Cc: Patrick McHardy Cc: David S. Miller Signed-off-by: Cong Wang Signed-off-by: David S. Miller --- Documentation/networking/netlink_mmap.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/networking/netlink_mmap.txt b/Documentation/networking/netlink_mmap.txt index e6088baf109d..5cc600587778 100644 --- a/Documentation/networking/netlink_mmap.txt +++ b/Documentation/networking/netlink_mmap.txt @@ -274,9 +274,9 @@ This example assumes some ring parameters of the ring setup are available. /* Get next frame header */ hdr = rx_ring + frame_offset; - if (hdr->nm_status == NL_MMAP_STATUS_VALID) + if (hdr->nm_status == NL_MMAP_STATUS_VALID) { /* Regular memory mapped frame */ - nlh = (void *hdr) + NL_MMAP_HDRLEN; + nlh = (void *)hdr + NL_MMAP_HDRLEN; len = hdr->nm_len; /* Release empty message immediately. May happen -- cgit v1.2.3 From d7d35c681fb4eae1fab3d93698e26a106ca7e79e Mon Sep 17 00:00:00 2001 From: Veaceslav Falico Date: Mon, 24 Jun 2013 11:49:33 +0200 Subject: bonding: doc: some details on backup slave arp validation Add some details to bonding documentation on how backup slave arp validation works. Signed-off-by: Veaceslav Falico Signed-off-by: David S. Miller --- Documentation/networking/bonding.txt | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'Documentation') diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt index e7454fcc9176..adee3b4a75cb 100644 --- a/Documentation/networking/bonding.txt +++ b/Documentation/networking/bonding.txt @@ -303,6 +303,12 @@ arp_validate such a situation, validation of backup slaves must be disabled. + The validation of ARP requests on backup slaves is mainly + helping bonding to decide which slaves are more likely to + work in case of the active slave failure, it doesn't really + guarantee that the backup slave will work if it's selected + as the next active slave. + This option is useful in network configurations in which multiple bonding hosts are concurrently issuing ARPs to one or more targets beyond a common switch. Should the link between -- cgit v1.2.3 From 8599b52e14a1611dcb563289421bee76751f1d53 Mon Sep 17 00:00:00 2001 From: Veaceslav Falico Date: Mon, 24 Jun 2013 11:49:34 +0200 Subject: bonding: add an option to fail when any of arp_ip_target is inaccessible Currently, we fail only when all of the ips in arp_ip_target are gone. However, in some situations we might need to fail if even one host from arp_ip_target becomes unavailable. All situations, obviously, rely on the idea that we need *completely* functional network, with all interfaces/addresses working correctly. One real world example might be: vlans on top on bond (hybrid port). If bond and vlans have ips assigned and we have their peers monitored via arp_ip_target - in case of switch misconfiguration (trunk/access port), slave driver malfunction or tagged/untagged traffic dropped on the way - we will be able to switch to another slave. Though any other configuration needs that if we need to have access to all arp_ip_targets. This patch adds this possibility by adding a new parameter - arp_all_targets (both as a module parameter and as a sysfs knob). It can be set to: 0 or any (the default) - which works exactly as it's working now - the slave is up if any of the arp_ip_targets are up. 1 or all - the slave is up if all of the arp_ip_targets are up. This parameter can be changed on the fly (via sysfs), and requires the mode to be active-backup and arp_validate to be enabled (it obeys the arp_validate config on which slaves to validate). Internally it's done through: 1) Add target_last_arp_rx[BOND_MAX_ARP_TARGETS] array to slave struct. It's an array of jiffies, meaning that slave->target_last_arp_rx[i] is the last time we've received arp from bond->params.arp_targets[i] on this slave. 2) If we successfully validate an arp from bond->params.arp_targets[i] in bond_validate_arp() - update the slave->target_last_arp_rx[i] with the current jiffies value. 3) When getting slave's last_rx via slave_last_rx(), we return the oldest time when we've received an arp from any address in bond->params.arp_targets[]. If the value of arp_all_targets == 0 - we still work the same way as before. Also, update the documentation to reflect the new parameter. v3->v4: Kill the forgotten rtnl_unlock(), rephrase the documentation part to be more clear, don't fail setting arp_all_targets if arp_validate is not set - it has no effect anyway but can be easier to set up. Also, print a warning if the last arp_ip_target is removed while the arp_interval is on, but not the arp_validate. v2->v3: Use _bh spinlock, remove useless rtnl_lock() and use jiffies for new arp_ip_target last arp, instead of slave_last_rx(). On bond_enslave(), use the same initialization value for target_last_arp_rx[] as is used for the default last_arp_rx, to avoid useless interface flaps. Also, instead of failing to remove the last arp_ip_target just print a warning - otherwise it might break existing scripts. v1->v2: Correctly handle adding/removing hosts in arp_ip_target - we need to shift/initialize all slave's target_last_arp_rx. Also, don't fail module loading on arp_all_targets misconfiguration, just disable it, and some minor style fixes. Signed-off-by: Veaceslav Falico Signed-off-by: David S. Miller --- Documentation/networking/bonding.txt | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'Documentation') diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt index adee3b4a75cb..87bbcfee2e06 100644 --- a/Documentation/networking/bonding.txt +++ b/Documentation/networking/bonding.txt @@ -321,6 +321,25 @@ arp_validate This option was added in bonding version 3.1.0. +arp_all_targets + + Specifies the quantity of arp_ip_targets that must be reachable + in order for the ARP monitor to consider a slave as being up. + This option affects only active-backup mode for slaves with + arp_validation enabled. + + Possible values are: + + any or 0 + + consider the slave up only when any of the arp_ip_targets + is reachable + + all or 1 + + consider the slave up only when all of the arp_ip_targets + are reachable + downdelay Specifies the time, in milliseconds, to wait before disabling -- cgit v1.2.3 From 4d0c875dcc4923476f364e83912d134da2df224c Mon Sep 17 00:00:00 2001 From: Julian Anastasov Date: Mon, 24 Jun 2013 22:44:41 +0300 Subject: ipvs: add sync_persist_mode flag Add sync_persist_mode flag to reduce sync traffic by syncing only persistent templates. Signed-off-by: Julian Anastasov Tested-by: Aleksey Chudov Signed-off-by: Simon Horman --- Documentation/networking/ipvs-sysctl.txt | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'Documentation') diff --git a/Documentation/networking/ipvs-sysctl.txt b/Documentation/networking/ipvs-sysctl.txt index 9573d0c48c6e..7a3c04729591 100644 --- a/Documentation/networking/ipvs-sysctl.txt +++ b/Documentation/networking/ipvs-sysctl.txt @@ -181,6 +181,19 @@ snat_reroute - BOOLEAN always be the same as the original route so it is an optimisation to disable snat_reroute and avoid the recalculation. +sync_persist_mode - INTEGER + default 0 + + Controls the synchronisation of connections when using persistence + + 0: All types of connections are synchronised + 1: Attempt to reduce the synchronisation traffic depending on + the connection type. For persistent services avoid synchronisation + for normal connections, do it only for persistence templates. + In such case, for TCP and SCTP it may need enabling sloppy_tcp and + sloppy_sctp flags on backup servers. For non-persistent services + such optimization is not applied, mode 0 is assumed. + sync_version - INTEGER default 1 -- cgit v1.2.3 From b7c4114b07bbacfe0aee1d04ad1ade9e42309620 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 10 Jun 2013 23:12:57 -0300 Subject: can: flexcan: Use a regulator to control the CAN transceiver Instead of using a GPIO to turn on/off the CAN transceiver, it is better to use a regulator as some systems may use a PMIC to power the CAN transceiver. Acked-by: Shawn Guo Signed-off-by: Fabio Estevam Signed-off-by: Marc Kleine-Budde --- Documentation/devicetree/bindings/net/can/fsl-flexcan.txt | 2 ++ 1 file changed, 2 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt index 8ff324eaa889..56d6cc336e1c 100644 --- a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt +++ b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt @@ -16,6 +16,8 @@ Optional properties: - clock-frequency : The oscillator frequency driving the flexcan device +- xceiver-supply: Regulator that powers the CAN transceiver + Example: can@1c000 { -- cgit v1.2.3 From 1067964305df131ede2c08c2f3c9b3892640f1c6 Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Fri, 28 Jun 2013 19:49:39 +0200 Subject: lib: vsprintf: add IPv4/v6 generic %p[Ii]S[pfs] format specifier In order to avoid making code that deals with printing both, IPv4 and IPv6 addresses, unnecessary complicated as for example ... if (sa.sa_family == AF_INET6) printk("... %pI6 ...", ..sin6_addr); else printk("... %pI4 ...", ..sin_addr.s_addr); ... it would be better to introduce a format specifier that can deal with those kind of situations internally; just as we have a "struct sockaddr" for generic mapping into "struct sockaddr_in" or "struct sockaddr_in6" as e.g. done in "union sctp_addr". Then, we could reduce the above statement into something like: printk("... %pIS ..", &sockaddr); In case our pointer is NULL, pointer() then deals with that already at an earlier point in time internally. While we're at it, support for both %piS/%pIS, where 'S' stands for sockaddr, comes (almost) for free. Additionally to that, postfix specifiers 'p', 'f' and 's' are supported as suggested and initially implemented in 2009 by Joe Perches [1]. Handling of those additional specifiers orientate on the initial RFC that was proposed. Also we support IPv6 compressed format specified by 'c' and various other IPv4 extensions as stated in the documentation part. Likely, there are many other areas than just SCTP in the kernel to make use of this extension as well. [1] http://patchwork.ozlabs.org/patch/31480/ Signed-off-by: Daniel Borkmann CC: Joe Perches CC: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller --- Documentation/printk-formats.txt | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) (limited to 'Documentation') diff --git a/Documentation/printk-formats.txt b/Documentation/printk-formats.txt index 3af5ae6c9c11..3e8cb73ac43c 100644 --- a/Documentation/printk-formats.txt +++ b/Documentation/printk-formats.txt @@ -121,6 +121,38 @@ IPv6 addresses: print a compressed IPv6 address as described by http://tools.ietf.org/html/rfc5952 +IPv4/IPv6 addresses (generic, with port, flowinfo, scope): + + %pIS 1.2.3.4 or 0001:0002:0003:0004:0005:0006:0007:0008 + %piS 001.002.003.004 or 00010002000300040005000600070008 + %pISc 1.2.3.4 or 1:2:3:4:5:6:7:8 + %pISpc 1.2.3.4:12345 or [1:2:3:4:5:6:7:8]:12345 + %p[Ii]S[pfschnbl] + + For printing an IP address without the need to distinguish whether it's + of type AF_INET or AF_INET6, a pointer to a valid 'struct sockaddr', + specified through 'IS' or 'iS', can be passed to this format specifier. + + The additional 'p', 'f', and 's' specifiers are used to specify port + (IPv4, IPv6), flowinfo (IPv6) and scope (IPv6). Ports have a ':' prefix, + flowinfo a '/' and scope a '%', each followed by the actual value. + + In case of an IPv6 address the compressed IPv6 address as described by + http://tools.ietf.org/html/rfc5952 is being used if the additional + specifier 'c' is given. The IPv6 address is surrounded by '[', ']' in + case of additional specifiers 'p', 'f' or 's' as suggested by + https://tools.ietf.org/html/draft-ietf-6man-text-addr-representation-07 + + In case of IPv4 addresses, the additional 'h', 'n', 'b', and 'l' + specifiers can be used as well and are ignored in case of an IPv6 + address. + + Further examples: + + %pISfc 1.2.3.4 or [1:2:3:4:5:6:7:8]/123456789 + %pISsc 1.2.3.4 or [1:2:3:4:5:6:7:8]%1234567890 + %pISpfc 1.2.3.4:12345 or [1:2:3:4:5:6:7:8]:12345/123456789 + UUID/GUID addresses: %pUb 00010203-0405-0607-0809-0a0b0c0d0e0f -- cgit v1.2.3 From 25c83b5c2e82560406d5265f42cd147f1eb441d0 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Thu, 4 Jul 2013 10:35:41 +0100 Subject: dt:net:stmmac: Add support to dwmac version 3.610 and 3.710 This patch adds dt support to dwmac version 3.610 and 3.710 these versions are integrated in STiH415 and STiH416 ARM A9 SOCs. To support these IP version, some of the device tree properties are extended. Signed-off-by: Srinivas Kandagatla Signed-off-by: David S. Miller --- Documentation/devicetree/bindings/net/stmmac.txt | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt index 060bbf098ef3..e1ddfcc46a4e 100644 --- a/Documentation/devicetree/bindings/net/stmmac.txt +++ b/Documentation/devicetree/bindings/net/stmmac.txt @@ -12,6 +12,10 @@ Required properties: property - phy-mode: String, operation mode of the PHY interface. Supported values are: "mii", "rmii", "gmii", "rgmii". +- snps,phy-addr phy address to connect to. +- snps,pbl Programmable Burst Length +- snps,fixed-burst Program the DMA to use the fixed burst mode +- snps,mixed-burst Program the DMA to use the mixed burst mode Optional properties: - mac-address: 6 bytes, mac address -- cgit v1.2.3 From 0e0764715d8116484d808f5b3985ca043080788e Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Thu, 4 Jul 2013 10:35:48 +0100 Subject: dt:net:stmmac: Add dt specific phy reset callback support. This patch adds phy reset callback support for stmmac driver via device trees. It adds three new properties to gmac device tree bindings to define the reset signal via gpio. With this patch users can conveniently pass reset gpio number with pre, pulse and post delay in micro secs via DTs. active low: _________ ____________ | | | | |_______________| active high: ________________ | | | | ________| |___________ Signed-off-by: Srinivas Kandagatla Signed-off-by: David S. Miller --- Documentation/devicetree/bindings/net/stmmac.txt | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt index e1ddfcc46a4e..261c563b5f06 100644 --- a/Documentation/devicetree/bindings/net/stmmac.txt +++ b/Documentation/devicetree/bindings/net/stmmac.txt @@ -13,6 +13,12 @@ Required properties: - phy-mode: String, operation mode of the PHY interface. Supported values are: "mii", "rmii", "gmii", "rgmii". - snps,phy-addr phy address to connect to. +- snps,reset-gpio gpio number for phy reset. +- snps,reset-active-low boolean flag to indicate if phy reset is active low. +- snps,reset-delays-us is triplet of delays + The 1st cell is reset pre-delay in micro seconds. + The 2nd cell is reset pulse in micro seconds. + The 3rd cell is reset post-delay in micro seconds. - snps,pbl Programmable Burst Length - snps,fixed-burst Program the DMA to use the fixed burst mode - snps,mixed-burst Program the DMA to use the mixed burst mode -- cgit v1.2.3 From cbf55001b2ddb814329735641be5d29b08c82b08 Mon Sep 17 00:00:00 2001 From: Eliezer Tamir Date: Mon, 8 Jul 2013 16:20:34 +0300 Subject: net: rename low latency sockets functions to busy poll Rename functions in include/net/ll_poll.h to busy wait. Clarify documentation about expected power use increase. Rename POLL_LL to POLL_BUSY_LOOP. Add need_resched() testing to poll/select busy loops. Note, that in select and poll can_busy_poll is dynamic and is updated continuously to reflect the existence of supported sockets with valid queue information. Signed-off-by: Eliezer Tamir Signed-off-by: David S. Miller --- Documentation/sysctl/net.txt | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) (limited to 'Documentation') diff --git a/Documentation/sysctl/net.txt b/Documentation/sysctl/net.txt index e658bbfb641f..7323b88e26be 100644 --- a/Documentation/sysctl/net.txt +++ b/Documentation/sysctl/net.txt @@ -53,22 +53,24 @@ Default: 64 low_latency_read ---------------- Low latency busy poll timeout for socket reads. (needs CONFIG_NET_LL_RX_POLL) -Approximate time in us to spin waiting for packets on the device queue. +Approximate time in us to busy loop waiting for packets on the device queue. This sets the default value of the SO_LL socket option. -Can be set or overridden per socket by setting socket option SO_LL. -Recommended value is 50. May increase power usage. +Can be set or overridden per socket by setting socket option SO_LL, which is +the preferred method of enabling. +If you need to enable the feature globally via sysctl, a value of 50 is recommended. +Will increase power usage. Default: 0 (off) low_latency_poll ---------------- Low latency busy poll timeout for poll and select. (needs CONFIG_NET_LL_RX_POLL) -Approximate time in us to spin waiting for packets on the device queue. +Approximate time in us to busy loop waiting for events. Recommended value depends on the number of sockets you poll on. For several sockets 50, for several hundreds 100. For more than that you probably want to use epoll. Note that only sockets with SO_LL set will be busy polled, so you want to either selectively set SO_LL on those sockets or set sysctl.net.low_latency_read globally. -May increase power usage. +Will increase power usage. Default: 0 (off) rmem_default -- cgit v1.2.3 From b78ba72cda78314c11ac8f47617240bc8d0e89da Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 9 Jul 2013 10:22:31 +0200 Subject: Documentation: Fix references to defunct linux-net@vger.kernel.org linux-net@vger.kernel.org was replaced by netdev@oss.sgi.com was replaced by netdev@vger.kernel.org. Signed-off-by: Geert Uytterhoeven Signed-off-by: David S. Miller --- Documentation/networking/arcnet.txt | 7 ++++--- Documentation/networking/vortex.txt | 2 +- 2 files changed, 5 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/networking/arcnet.txt b/Documentation/networking/arcnet.txt index 9ff579502151..aff97f47c05c 100644 --- a/Documentation/networking/arcnet.txt +++ b/Documentation/networking/arcnet.txt @@ -70,9 +70,10 @@ list, mail to linux-arcnet@tichy.ch.uj.edu.pl. There are archives of the mailing list at: http://epistolary.org/mailman/listinfo.cgi/arcnet -The people on linux-net@vger.kernel.org have also been known to be very -helpful, especially when we're talking about ALPHA Linux kernels that may or -may not work right in the first place. +The people on linux-net@vger.kernel.org (now defunct, replaced by +netdev@vger.kernel.org) have also been known to be very helpful, especially +when we're talking about ALPHA Linux kernels that may or may not work right +in the first place. Other Drivers and Info diff --git a/Documentation/networking/vortex.txt b/Documentation/networking/vortex.txt index b4038ffb3bc5..9a8041dcbb53 100644 --- a/Documentation/networking/vortex.txt +++ b/Documentation/networking/vortex.txt @@ -359,7 +359,7 @@ steps you should take: - OK, it's a driver problem. You need to generate a report. Typically this is an email to the - maintainer and/or linux-net@vger.kernel.org. The maintainer's + maintainer and/or netdev@vger.kernel.org. The maintainer's email address will be in the driver source or in the MAINTAINERS file. - The contents of your report will vary a lot depending upon the -- cgit v1.2.3