From 5988af2319781bc8e0ce418affec4e09cfa77907 Mon Sep 17 00:00:00 2001 From: Rohit Hagargundgi Date: Tue, 12 May 2009 13:46:57 -0700 Subject: mtd: Flex-OneNAND support Add support for Samsung Flex-OneNAND devices. Flex-OneNAND combines SLC and MLC technologies into a single device. SLC area provides increased reliability and speed, suitable for storing code such as bootloader, kernel and root file system. MLC area provides high density and is suitable for storing user data. SLC and MLC regions can be configured through kernel parameter. [akpm@linux-foundation.org: export flexoand_region and onenand_addr] Signed-off-by: Rohit Hagargundgi Signed-off-by: Kyungmin Park Cc: Vishak G Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse --- Documentation/kernel-parameters.txt | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'Documentation') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index e87bdbfbcc75..12df135f8af9 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1380,6 +1380,16 @@ and is between 256 and 4096 characters. It is defined in the file mtdparts= [MTD] See drivers/mtd/cmdlinepart.c. + onenand.bdry= [HW,MTD] Flex-OneNAND Boundary Configuration + + Format: [die0_boundary][,die0_lock][,die1_boundary][,die1_lock] + + boundary - index of last SLC block on Flex-OneNAND. + The remaining blocks are configured as MLC blocks. + lock - Configure if Flex-OneNAND boundary should be locked. + Once locked, the boundary cannot be changed. + 1 indicates lock status, 0 indicates unlock status. + mtdset= [ARM] ARM/S3C2412 JIVE boot control -- cgit v1.2.3