From a3857f89ddb05097d4cffeb3884d6e26da8a34e2 Mon Sep 17 00:00:00 2001 From: Michael Tretter Date: Mon, 9 Nov 2020 14:48:16 +0100 Subject: dt-bindings: soc: xlnx: extract xlnx, vcu-settings to separate binding The xlnx,vcu binding comprises two adjacent register banks: The first register bank ("vcu_slcr") contains registers for setting the clocks of the vcu and controlling the performance monitors. The second bank ("logicoreip") contains the configuration settings of the video codec unit, which are set before synthesizing the bitstream. Drivers that drive the actual video codec unit need to read the registers from the logicoreip register bank for configuring the vcu firmware. As logicoreip is a too generic name for this register bank, use "vcu-settings" as a binding name, because the register bank basically provides the configuration settings of the VCU. Therefore, add the vcu-settings binding to provide a syscon interface for other drivers to read these registers. The alternative would have been to merge the two register banks of the xlnx,vcu binding into one register bank and make xlnx,vcu provide a syscon interface, but that would lead to more incompatibility than making second register bank of xlnx,vcu optional. Signed-off-by: Michael Tretter Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20201109134818.4159342-3-m.tretter@pengutronix.de Signed-off-by: Michal Simek --- .../bindings/soc/xilinx/xlnx,vcu-settings.yaml | 34 ++++++++++++++++++++++ .../devicetree/bindings/soc/xilinx/xlnx,vcu.txt | 9 ++---- 2 files changed, 36 insertions(+), 7 deletions(-) create mode 100644 Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu-settings.yaml (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu-settings.yaml b/Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu-settings.yaml new file mode 100644 index 000000000000..378d0ced43c8 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu-settings.yaml @@ -0,0 +1,34 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/xilinx/xlnx,vcu-settings.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx VCU Settings + +maintainers: + - Michael Tretter + +description: | + The Xilinx VCU Settings provides information about the configuration of the + video codec unit. + +properties: + compatible: + items: + - const: xlnx,vcu-settings + - const: syscon + + reg: + maxItems: 1 + +required: + - compatible + - reg + +examples: + - | + xlnx_vcu: vcu@a0041000 { + compatible = "xlnx,vcu-settings", "syscon"; + reg = <0x0 0xa0041000 0x0 0x1000>; + }; diff --git a/Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu.txt b/Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu.txt index 6786d6715df0..2417b13ba468 100644 --- a/Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu.txt +++ b/Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu.txt @@ -12,10 +12,7 @@ Required properties: - compatible: shall be one of: "xlnx,vcu" "xlnx,vcu-logicoreip-1.0" -- reg, reg-names: There are two sets of registers need to provide. - 1. vcu slcr - 2. Logicore - reg-names should contain name for the each register sequence. +- reg : The base offset and size of the VCU_PL_SLCR register space. - clocks: phandle for aclk and pll_ref clocksource - clock-names: The identification string, "aclk", is always required for the axi clock. "pll_ref" is required for pll. @@ -23,9 +20,7 @@ Example: xlnx_vcu: vcu@a0040000 { compatible = "xlnx,vcu-logicoreip-1.0"; - reg = <0x0 0xa0040000 0x0 0x1000>, - <0x0 0xa0041000 0x0 0x1000>; - reg-names = "vcu_slcr", "logicore"; + reg = <0x0 0xa0040000 0x0 0x1000>; clocks = <&si570_1>, <&clkc 71>; clock-names = "pll_ref", "aclk"; }; -- cgit v1.2.3