From 6722feada7f6213ba06d510ef853e57ddcd59dae Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 7 Oct 2007 12:25:46 +0200 Subject: hwmon: (lm78/w83781d) Probe fewer I2C addresses We've never seen any device supported by the lm78 or w83781d driver at addresses 0x20-0x27, so let's stop probing these addresses. Extra probes cost time, and have potential for confusing or misdetecting other I2C devices. Signed-off-by: Jean Delvare Signed-off-by: Mark M. Hoffman --- Documentation/hwmon/lm78 | 4 ++-- Documentation/hwmon/w83781d | 6 +++--- 2 files changed, 5 insertions(+), 5 deletions(-) (limited to 'Documentation') diff --git a/Documentation/hwmon/lm78 b/Documentation/hwmon/lm78 index dfc318a60fd4..60932e26abaa 100644 --- a/Documentation/hwmon/lm78 +++ b/Documentation/hwmon/lm78 @@ -4,12 +4,12 @@ Kernel driver lm78 Supported chips: * National Semiconductor LM78 / LM78-J Prefix: 'lm78' - Addresses scanned: I2C 0x20 - 0x2f, ISA 0x290 (8 I/O ports) + Addresses scanned: I2C 0x28 - 0x2f, ISA 0x290 (8 I/O ports) Datasheet: Publicly available at the National Semiconductor website http://www.national.com/ * National Semiconductor LM79 Prefix: 'lm79' - Addresses scanned: I2C 0x20 - 0x2f, ISA 0x290 (8 I/O ports) + Addresses scanned: I2C 0x28 - 0x2f, ISA 0x290 (8 I/O ports) Datasheet: Publicly available at the National Semiconductor website http://www.national.com/ diff --git a/Documentation/hwmon/w83781d b/Documentation/hwmon/w83781d index b1e9f80098ee..dbeadb269a69 100644 --- a/Documentation/hwmon/w83781d +++ b/Documentation/hwmon/w83781d @@ -4,11 +4,11 @@ Kernel driver w83781d Supported chips: * Winbond W83781D Prefix: 'w83781d' - Addresses scanned: I2C 0x20 - 0x2f, ISA 0x290 (8 I/O ports) + Addresses scanned: I2C 0x28 - 0x2f, ISA 0x290 (8 I/O ports) Datasheet: http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/w83781d.pdf * Winbond W83782D Prefix: 'w83782d' - Addresses scanned: I2C 0x20 - 0x2f, ISA 0x290 (8 I/O ports) + Addresses scanned: I2C 0x28 - 0x2f, ISA 0x290 (8 I/O ports) Datasheet: http://www.winbond.com/PDF/sheet/w83782d.pdf * Winbond W83783S Prefix: 'w83783s' @@ -16,7 +16,7 @@ Supported chips: Datasheet: http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/w83783s.pdf * Winbond W83627HF Prefix: 'w83627hf' - Addresses scanned: I2C 0x20 - 0x2f, ISA 0x290 (8 I/O ports) + Addresses scanned: I2C 0x28 - 0x2f, ISA 0x290 (8 I/O ports) Datasheet: http://www.winbond.com/PDF/sheet/w83627hf.pdf * Asus AS99127F Prefix: 'as99127f' -- cgit v1.2.3 From 85f03bccd6e0e2ac6ccf017d4bcd5d74bb87a671 Mon Sep 17 00:00:00 2001 From: Kevin Lo Date: Fri, 23 Nov 2007 09:31:52 +0800 Subject: hwmon: Add support for Winbond W83L786NG/NR Signed-off-by: Kevin Lo Signed-off-by: Mark M. Hoffman --- Documentation/hwmon/w83l786ng | 54 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 54 insertions(+) create mode 100644 Documentation/hwmon/w83l786ng (limited to 'Documentation') diff --git a/Documentation/hwmon/w83l786ng b/Documentation/hwmon/w83l786ng new file mode 100644 index 000000000000..d8f55d7fff10 --- /dev/null +++ b/Documentation/hwmon/w83l786ng @@ -0,0 +1,54 @@ +Kernel driver w83l786ng +===================== + +Supported chips: + * Winbond W83L786NG/W83L786NR + Prefix: 'w83l786ng' + Addresses scanned: I2C 0x2e - 0x2f + Datasheet: http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/W83L786NRNG09.pdf + +Author: Kevin Lo + + +Module Parameters +----------------- + +* reset boolean + (default 0) + Use 'reset=1' to reset the chip (via index 0x40, bit 7). The default + behavior is no chip reset to preserve BIOS settings + + +Description +----------- + +This driver implements support for Winbond W83L786NG/W83L786NR chips. + +The driver implements two temperature sensors, two fan rotation speed +sensors, and three voltage sensors. + +Temperatures are measured in degrees Celsius and measurement resolution is 1 +degC for temp1 and temp2. + +Fan rotation speeds are reported in RPM (rotations per minute). Fan readings +readings can be divided by a programmable divider (1, 2, 4, 8, 16, 32, 64 +or 128 for fan 1/2) to give the readings more range or accuracy. + +Voltage sensors (also known as IN sensors) report their values in millivolts. +An alarm is triggered if the voltage has crossed a programmable minimum +or maximum limit. + +/sys files +---------- + +pwm[1-2] - this file stores PWM duty cycle or DC value (fan speed) in range: + 0 (stop) to 255 (full) +pwm[1-2]_enable - this file controls mode of fan/temperature control: + * 0 Manual Mode + * 1 Thermal Cruise + * 2 Smart Fan II + * 4 FAN_SET +pwm[1-2]_mode - Select PWM of DC mode + * 0 DC + * 1 PWM +tolerance[1-2] - Value in degrees of Celsius (degC) for +- T -- cgit v1.2.3 From c7fa373796ea685874ca9525eeb3d0d0951e511b Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Tue, 9 Oct 2007 15:22:22 +0200 Subject: hwmon: (lm87) Add support for the Analog Devices ADM1024 It happens that the Analog Devices ADM1024 is fully compatible with the National Semiconductor LM87, so support for the former can easily be added to the lm87 driver. Signed-off-by: Jean Delvare Signed-off-by: Mark M. Hoffman --- Documentation/hwmon/lm87 | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'Documentation') diff --git a/Documentation/hwmon/lm87 b/Documentation/hwmon/lm87 index c952c57f0e11..ec27aa1b94cb 100644 --- a/Documentation/hwmon/lm87 +++ b/Documentation/hwmon/lm87 @@ -4,8 +4,12 @@ Kernel driver lm87 Supported chips: * National Semiconductor LM87 Prefix: 'lm87' - Addresses scanned: I2C 0x2c - 0x2f + Addresses scanned: I2C 0x2c - 0x2e Datasheet: http://www.national.com/pf/LM/LM87.html + * Analog Devices ADM1024 + Prefix: 'adm1024' + Addresses scanned: I2C 0x2c - 0x2e + Datasheet: http://www.analog.com/en/prod/0,2877,ADM1024,00.html Authors: Frodo Looijaard , @@ -19,11 +23,12 @@ Authors: Description ----------- -This driver implements support for the National Semiconductor LM87. +This driver implements support for the National Semiconductor LM87 +and the Analog Devices ADM1024. The LM87 implements up to three temperature sensors, up to two fan rotation speed sensors, up to seven voltage sensors, alarms, and some -miscellaneous stuff. +miscellaneous stuff. The ADM1024 is fully compatible. Temperatures are measured in degrees Celsius. Each input has a high and low alarm settings. A high limit produces an alarm when the value -- cgit v1.2.3 From ec1d86c457c0d1a530914290d0bbd3ecce022272 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 18 Nov 2007 23:46:10 +0100 Subject: hwmon: Update the lm-sensors website address It's about time to reflect the move of the lm-sensors project to lm-sensors.org. Signed-off-by: Jean Delvare Signed-off-by: Mark M. Hoffman --- Documentation/hwmon/userspace-tools | 2 +- Documentation/hwmon/w83627hf | 3 +-- Documentation/i2c/busses/i2c-piix4 | 2 +- 3 files changed, 3 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/hwmon/userspace-tools b/Documentation/hwmon/userspace-tools index 19900a8fe679..9865aeedc58f 100644 --- a/Documentation/hwmon/userspace-tools +++ b/Documentation/hwmon/userspace-tools @@ -14,7 +14,7 @@ Lm-sensors Core set of utilities that will allow you to obtain health information, setup monitoring limits etc. You can get them on their homepage -http://www.lm-sensors.nu/ or as a package from your Linux distribution. +http://www.lm-sensors.org/ or as a package from your Linux distribution. If from website: Get lm-sensors from project web site. Please note, you need only userspace diff --git a/Documentation/hwmon/w83627hf b/Documentation/hwmon/w83627hf index 792231921241..880a59f53da9 100644 --- a/Documentation/hwmon/w83627hf +++ b/Documentation/hwmon/w83627hf @@ -73,5 +73,4 @@ doesn't help, you may just ignore the bogus VID reading with no harm done. For further information on this driver see the w83781d driver documentation. -[1] http://www2.lm-sensors.nu/~lm78/cvs/browse.cgi/lm_sensors2/doc/vid - +[1] http://www.lm-sensors.org/browser/lm-sensors/trunk/doc/vid diff --git a/Documentation/i2c/busses/i2c-piix4 b/Documentation/i2c/busses/i2c-piix4 index cf6b6cb02aa1..ef1efa79b1df 100644 --- a/Documentation/i2c/busses/i2c-piix4 +++ b/Documentation/i2c/busses/i2c-piix4 @@ -95,4 +95,4 @@ of all affected systems, so the only safe solution was to prevent access to the SMBus on all IBM systems (detected using DMI data.) For additional information, read: -http://www2.lm-sensors.nu/~lm78/cvs/lm_sensors2/README.thinkpad +http://www.lm-sensors.org/browser/lm-sensors/trunk/README.thinkpad -- cgit v1.2.3 From f1d8e33263abb6a3a2265ba59344c7eb002b2389 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 25 Nov 2007 16:14:44 +0100 Subject: hwmon: (it87) Discard a dead e-mail address Signed-off-by: Jean Delvare Signed-off-by: Mark M. Hoffman --- Documentation/hwmon/it87 | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87 index 5b704a40256b..f4ce1fdbeff6 100644 --- a/Documentation/hwmon/it87 +++ b/Documentation/hwmon/it87 @@ -30,7 +30,7 @@ Supported chips: Datasheet: No longer be available Authors: - Christophe Gauthron + Christophe Gauthron Jean Delvare -- cgit v1.2.3 From 05663368d2138c14fa1b9aa8eeca4ca9a33d7c77 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Fri, 30 Nov 2007 23:51:24 +0100 Subject: hwmon: (w83781d) Drop W83627HF support The W83627HF hardware monitoring features are supported by the w83627hf driver for several years now. Support by the w83781d has been advertised as deprecated 6 months ago, it's about time to see it go. Signed-off-by: Jean Delvare Signed-off-by: Mark M. Hoffman --- Documentation/hwmon/w83781d | 18 ++++++------------ 1 file changed, 6 insertions(+), 12 deletions(-) (limited to 'Documentation') diff --git a/Documentation/hwmon/w83781d b/Documentation/hwmon/w83781d index dbeadb269a69..6f800a0283e9 100644 --- a/Documentation/hwmon/w83781d +++ b/Documentation/hwmon/w83781d @@ -14,10 +14,6 @@ Supported chips: Prefix: 'w83783s' Addresses scanned: I2C 0x2d Datasheet: http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/w83783s.pdf - * Winbond W83627HF - Prefix: 'w83627hf' - Addresses scanned: I2C 0x28 - 0x2f, ISA 0x290 (8 I/O ports) - Datasheet: http://www.winbond.com/PDF/sheet/w83627hf.pdf * Asus AS99127F Prefix: 'as99127f' Addresses scanned: I2C 0x28 - 0x2f @@ -50,20 +46,18 @@ force_subclients=bus,caddr,saddr,saddr Description ----------- -This driver implements support for the Winbond W83781D, W83782D, W83783S, -W83627HF chips, and the Asus AS99127F chips. We will refer to them -collectively as W8378* chips. +This driver implements support for the Winbond W83781D, W83782D, W83783S +chips, and the Asus AS99127F chips. We will refer to them collectively as +W8378* chips. There is quite some difference between these chips, but they are similar enough that it was sensible to put them together in one driver. -The W83627HF chip is assumed to be identical to the ISA W83782D. The Asus chips are similar to an I2C-only W83782D. Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA as99127f 7 3 0 3 0x31 0x12c3 yes no as99127f rev.2 (type_name = as99127f) 0x31 0x5ca3 yes no w83781d 7 3 0 3 0x10-1 0x5ca3 yes yes -w83627hf 9 3 2 3 0x21 0x5ca3 yes yes(LPC) w83782d 9 3 2-4 3 0x30 0x5ca3 yes yes w83783s 5-6 3 2 1-2 0x40 0x5ca3 yes no @@ -143,9 +137,9 @@ Individual alarm and beep bits: 0x000400: in6 0x000800: fan3 0x001000: chassis -0x002000: temp3 (W83782D and W83627HF only) -0x010000: in7 (W83782D and W83627HF only) -0x020000: in8 (W83782D and W83627HF only) +0x002000: temp3 (W83782D only) +0x010000: in7 (W83782D only) +0x020000: in8 (W83782D only) If an alarm triggers, it will remain triggered until the hardware register is read at least once. This means that the cause for the alarm may -- cgit v1.2.3 From 5812f9283e621370a2d65282b7bcc942bf2c3f1c Mon Sep 17 00:00:00 2001 From: Steve Hardy Date: Tue, 22 Jan 2008 23:00:02 +0000 Subject: hwmon: Add support for Texas Instruments/Burr-Brown ADS7828 Signed-off-by: Steve Hardy Acked-by: Jean Delvare Signed-off-by: Mark M. Hoffman --- Documentation/hwmon/ads7828 | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) create mode 100644 Documentation/hwmon/ads7828 (limited to 'Documentation') diff --git a/Documentation/hwmon/ads7828 b/Documentation/hwmon/ads7828 new file mode 100644 index 000000000000..75bc4beaf447 --- /dev/null +++ b/Documentation/hwmon/ads7828 @@ -0,0 +1,36 @@ +Kernel driver ads7828 +===================== + +Supported chips: + * Texas Instruments/Burr-Brown ADS7828 + Prefix: 'ads7828' + Addresses scanned: I2C 0x48, 0x49, 0x4a, 0x4b + Datasheet: Publicly available at the Texas Instruments website : + http://focus.ti.com/lit/ds/symlink/ads7828.pdf + +Authors: + Steve Hardy + +Module Parameters +----------------- + +* se_input: bool (default Y) + Single ended operation - set to N for differential mode +* int_vref: bool (default Y) + Operate with the internal 2.5V reference - set to N for external reference +* vref_mv: int (default 2500) + If using an external reference, set this to the reference voltage in mV + +Description +----------- + +This driver implements support for the Texas Instruments ADS7828. + +This device is a 12-bit 8-channel A-D converter. + +It can operate in single ended mode (8 +ve inputs) or in differential mode, +where 4 differential pairs can be measured. + +The chip also has the facility to use an external voltage reference. This +may be required if your hardware supplies the ADS7828 from a 5V supply, see +the datasheet for more details. -- cgit v1.2.3 From cbe311f2a40b8430d8e01b97c11e9e95d888430b Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 3 Jan 2008 21:22:44 +0100 Subject: hwmon: (w83627ehf) The W83627DHG has 8 VID pins While the W83627EHF/EHG has only 6 VID pins, the W83627DHG has 8 VID pins, to support VRD 11.0. Add support for this. Signed-off-by: Jean Delvare Signed-off-by: Mark M. Hoffman --- Documentation/hwmon/w83627ehf | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/hwmon/w83627ehf b/Documentation/hwmon/w83627ehf index ccc2bcb61068..d6e1ae30fa6e 100644 --- a/Documentation/hwmon/w83627ehf +++ b/Documentation/hwmon/w83627ehf @@ -23,8 +23,9 @@ W83627DHG super I/O chips. We will refer to them collectively as Winbond chips. The chips implement three temperature sensors, five fan rotation speed sensors, ten analog voltage sensors (only nine for the 627DHG), one -VID (6 pins), alarms with beep warnings (control unimplemented), and -some automatic fan regulation strategies (plus manual fan control mode). +VID (6 pins for the 627EHF/EHG, 8 pins for the 627DHG), alarms with beep +warnings (control unimplemented), and some automatic fan regulation +strategies (plus manual fan control mode). Temperatures are measured in degrees Celsius and measurement resolution is 1 degC for temp1 and 0.5 degC for temp2 and temp3. An alarm is triggered when -- cgit v1.2.3