From d9b27d50340c4c90637ebf24106c9064992e2f2a Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Wed, 20 Mar 2019 17:37:31 +0000 Subject: ASoC: lochnagar: Add device tree binding document Lochnagar is an evaluation and development board for Cirrus Logic Smart CODEC and Amp devices. It allows the connection of most Cirrus Logic devices on mini-cards, as well as allowing connection of various application processor systems to provide a full evaluation platform. This driver supports the board controller chip on the Lochnagar board. Signed-off-by: Charles Keepax Signed-off-by: Mark Brown --- .../devicetree/bindings/sound/cirrus,lochnagar.txt | 39 ++++++++++++++++++++++ 1 file changed, 39 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/cirrus,lochnagar.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/sound/cirrus,lochnagar.txt b/Documentation/devicetree/bindings/sound/cirrus,lochnagar.txt new file mode 100644 index 000000000000..41ae2699f07a --- /dev/null +++ b/Documentation/devicetree/bindings/sound/cirrus,lochnagar.txt @@ -0,0 +1,39 @@ +Cirrus Logic Lochnagar Audio Development Board + +Lochnagar is an evaluation and development board for Cirrus Logic +Smart CODEC and Amp devices. It allows the connection of most Cirrus +Logic devices on mini-cards, as well as allowing connection of +various application processor systems to provide a full evaluation +platform. Audio system topology, clocking and power can all be +controlled through the Lochnagar, allowing the device under test +to be used in a variety of possible use cases. + +This binding document describes the binding for the audio portion +of the driver. + +This binding must be part of the Lochnagar MFD binding: + [4] ../mfd/cirrus,lochnagar.txt + +Required properties: + + - compatible : One of the following strings: + "cirrus,lochnagar2-soundcard" + + - #sound-dai-cells : Must be set to 1. + + - clocks : Contains an entry for each entry in clock-names. + - clock-names : Must include the following clocks: + "mclk" Master clock source for the sound card, should normally + be set to LOCHNAGAR_SOUNDCARD_MCLK provided by the Lochnagar + clock driver. + +Example: + +lochnagar-sc { + compatible = "cirrus,lochnagar2-soundcard"; + + #sound-dai-cells = <1>; + + clocks = <&lochnagar_clk LOCHNAGAR_SOUNDCARD_MCLK>; + clock-names = "mclk"; +}; -- cgit v1.2.3