From a09e64fbc0094e3073dbb09c3b4bfe4ab669244b Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 5 Aug 2008 16:14:15 +0100 Subject: [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: Russell King --- arch/arm/mach-s3c2410/bast-ide.c | 6 +- arch/arm/mach-s3c2410/bast-irq.c | 8 +- arch/arm/mach-s3c2410/clock.c | 6 +- arch/arm/mach-s3c2410/dma.c | 10 +- arch/arm/mach-s3c2410/gpio.c | 4 +- arch/arm/mach-s3c2410/h1940-bluetooth.c | 6 +- arch/arm/mach-s3c2410/include/mach/anubis-cpld.h | 25 + arch/arm/mach-s3c2410/include/mach/anubis-irq.h | 21 + arch/arm/mach-s3c2410/include/mach/anubis-map.h | 38 + arch/arm/mach-s3c2410/include/mach/audio.h | 45 + arch/arm/mach-s3c2410/include/mach/bast-cpld.h | 53 + arch/arm/mach-s3c2410/include/mach/bast-irq.h | 29 + arch/arm/mach-s3c2410/include/mach/bast-map.h | 146 +++ arch/arm/mach-s3c2410/include/mach/bast-pmu.h | 40 + arch/arm/mach-s3c2410/include/mach/debug-macro.S | 102 ++ arch/arm/mach-s3c2410/include/mach/dma.h | 453 ++++++++ arch/arm/mach-s3c2410/include/mach/entry-macro.S | 78 ++ arch/arm/mach-s3c2410/include/mach/fb.h | 74 ++ arch/arm/mach-s3c2410/include/mach/gpio.h | 18 + arch/arm/mach-s3c2410/include/mach/h1940-latch.h | 64 ++ arch/arm/mach-s3c2410/include/mach/h1940.h | 21 + arch/arm/mach-s3c2410/include/mach/hardware.h | 137 +++ arch/arm/mach-s3c2410/include/mach/idle.h | 24 + arch/arm/mach-s3c2410/include/mach/io.h | 218 ++++ arch/arm/mach-s3c2410/include/mach/irqs.h | 166 +++ arch/arm/mach-s3c2410/include/mach/leds-gpio.h | 28 + arch/arm/mach-s3c2410/include/mach/map.h | 178 +++ arch/arm/mach-s3c2410/include/mach/memory.h | 19 + arch/arm/mach-s3c2410/include/mach/osiris-cpld.h | 30 + arch/arm/mach-s3c2410/include/mach/osiris-map.h | 42 + arch/arm/mach-s3c2410/include/mach/otom-map.h | 30 + arch/arm/mach-s3c2410/include/mach/regs-clock.h | 197 ++++ arch/arm/mach-s3c2410/include/mach/regs-dsc.h | 184 ++++ arch/arm/mach-s3c2410/include/mach/regs-gpio.h | 1163 ++++++++++++++++++++ arch/arm/mach-s3c2410/include/mach/regs-gpioj.h | 106 ++ arch/arm/mach-s3c2410/include/mach/regs-irq.h | 43 + arch/arm/mach-s3c2410/include/mach/regs-lcd.h | 162 +++ arch/arm/mach-s3c2410/include/mach/regs-mem.h | 220 ++++ arch/arm/mach-s3c2410/include/mach/regs-power.h | 40 + .../mach-s3c2410/include/mach/regs-s3c2412-mem.h | 29 + arch/arm/mach-s3c2410/include/mach/regs-s3c2412.h | 23 + .../mach-s3c2410/include/mach/regs-s3c2443-clock.h | 195 ++++ arch/arm/mach-s3c2410/include/mach/regs-sdi.h | 127 +++ arch/arm/mach-s3c2410/include/mach/reset.h | 22 + arch/arm/mach-s3c2410/include/mach/spi-gpio.h | 27 + arch/arm/mach-s3c2410/include/mach/spi.h | 25 + arch/arm/mach-s3c2410/include/mach/system-reset.h | 64 ++ arch/arm/mach-s3c2410/include/mach/system.h | 58 + arch/arm/mach-s3c2410/include/mach/timex.h | 26 + arch/arm/mach-s3c2410/include/mach/uncompress.h | 52 + arch/arm/mach-s3c2410/include/mach/usb-control.h | 41 + arch/arm/mach-s3c2410/include/mach/vmalloc.h | 20 + arch/arm/mach-s3c2410/include/mach/vr1000-cpld.h | 18 + arch/arm/mach-s3c2410/include/mach/vr1000-irq.h | 26 + arch/arm/mach-s3c2410/include/mach/vr1000-map.h | 110 ++ arch/arm/mach-s3c2410/mach-amlm5900.c | 8 +- arch/arm/mach-s3c2410/mach-bast.c | 16 +- arch/arm/mach-s3c2410/mach-h1940.c | 14 +- arch/arm/mach-s3c2410/mach-n30.c | 10 +- arch/arm/mach-s3c2410/mach-otom.c | 6 +- arch/arm/mach-s3c2410/mach-qt2410.c | 12 +- arch/arm/mach-s3c2410/mach-smdk2410.c | 2 +- arch/arm/mach-s3c2410/mach-tct_hammer.c | 2 +- arch/arm/mach-s3c2410/mach-vr1000.c | 14 +- arch/arm/mach-s3c2410/nor-simtec.c | 6 +- arch/arm/mach-s3c2410/pm-h1940.S | 6 +- arch/arm/mach-s3c2410/pm.c | 6 +- arch/arm/mach-s3c2410/s3c2410.c | 4 +- arch/arm/mach-s3c2410/sleep.S | 10 +- arch/arm/mach-s3c2410/usb-simtec.c | 10 +- 70 files changed, 5140 insertions(+), 83 deletions(-) create mode 100644 arch/arm/mach-s3c2410/include/mach/anubis-cpld.h create mode 100644 arch/arm/mach-s3c2410/include/mach/anubis-irq.h create mode 100644 arch/arm/mach-s3c2410/include/mach/anubis-map.h create mode 100644 arch/arm/mach-s3c2410/include/mach/audio.h create mode 100644 arch/arm/mach-s3c2410/include/mach/bast-cpld.h create mode 100644 arch/arm/mach-s3c2410/include/mach/bast-irq.h create mode 100644 arch/arm/mach-s3c2410/include/mach/bast-map.h create mode 100644 arch/arm/mach-s3c2410/include/mach/bast-pmu.h create mode 100644 arch/arm/mach-s3c2410/include/mach/debug-macro.S create mode 100644 arch/arm/mach-s3c2410/include/mach/dma.h create mode 100644 arch/arm/mach-s3c2410/include/mach/entry-macro.S create mode 100644 arch/arm/mach-s3c2410/include/mach/fb.h create mode 100644 arch/arm/mach-s3c2410/include/mach/gpio.h create mode 100644 arch/arm/mach-s3c2410/include/mach/h1940-latch.h create mode 100644 arch/arm/mach-s3c2410/include/mach/h1940.h create mode 100644 arch/arm/mach-s3c2410/include/mach/hardware.h create mode 100644 arch/arm/mach-s3c2410/include/mach/idle.h create mode 100644 arch/arm/mach-s3c2410/include/mach/io.h create mode 100644 arch/arm/mach-s3c2410/include/mach/irqs.h create mode 100644 arch/arm/mach-s3c2410/include/mach/leds-gpio.h create mode 100644 arch/arm/mach-s3c2410/include/mach/map.h create mode 100644 arch/arm/mach-s3c2410/include/mach/memory.h create mode 100644 arch/arm/mach-s3c2410/include/mach/osiris-cpld.h create mode 100644 arch/arm/mach-s3c2410/include/mach/osiris-map.h create mode 100644 arch/arm/mach-s3c2410/include/mach/otom-map.h create mode 100644 arch/arm/mach-s3c2410/include/mach/regs-clock.h create mode 100644 arch/arm/mach-s3c2410/include/mach/regs-dsc.h create mode 100644 arch/arm/mach-s3c2410/include/mach/regs-gpio.h create mode 100644 arch/arm/mach-s3c2410/include/mach/regs-gpioj.h create mode 100644 arch/arm/mach-s3c2410/include/mach/regs-irq.h create mode 100644 arch/arm/mach-s3c2410/include/mach/regs-lcd.h create mode 100644 arch/arm/mach-s3c2410/include/mach/regs-mem.h create mode 100644 arch/arm/mach-s3c2410/include/mach/regs-power.h create mode 100644 arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h create mode 100644 arch/arm/mach-s3c2410/include/mach/regs-s3c2412.h create mode 100644 arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h create mode 100644 arch/arm/mach-s3c2410/include/mach/regs-sdi.h create mode 100644 arch/arm/mach-s3c2410/include/mach/reset.h create mode 100644 arch/arm/mach-s3c2410/include/mach/spi-gpio.h create mode 100644 arch/arm/mach-s3c2410/include/mach/spi.h create mode 100644 arch/arm/mach-s3c2410/include/mach/system-reset.h create mode 100644 arch/arm/mach-s3c2410/include/mach/system.h create mode 100644 arch/arm/mach-s3c2410/include/mach/timex.h create mode 100644 arch/arm/mach-s3c2410/include/mach/uncompress.h create mode 100644 arch/arm/mach-s3c2410/include/mach/usb-control.h create mode 100644 arch/arm/mach-s3c2410/include/mach/vmalloc.h create mode 100644 arch/arm/mach-s3c2410/include/mach/vr1000-cpld.h create mode 100644 arch/arm/mach-s3c2410/include/mach/vr1000-irq.h create mode 100644 arch/arm/mach-s3c2410/include/mach/vr1000-map.h (limited to 'arch/arm/mach-s3c2410') diff --git a/arch/arm/mach-s3c2410/bast-ide.c b/arch/arm/mach-s3c2410/bast-ide.c index df95fe37cdc8..298ececfa366 100644 --- a/arch/arm/mach-s3c2410/bast-ide.c +++ b/arch/arm/mach-s3c2410/bast-ide.c @@ -24,9 +24,9 @@ #include #include -#include -#include -#include +#include +#include +#include /* IDE ports */ diff --git a/arch/arm/mach-s3c2410/bast-irq.c b/arch/arm/mach-s3c2410/bast-irq.c index 4e58bc0e30e3..c66021b5fa4d 100644 --- a/arch/arm/mach-s3c2410/bast-irq.c +++ b/arch/arm/mach-s3c2410/bast-irq.c @@ -28,15 +28,15 @@ #include -#include +#include #include #include #include -#include -#include -#include +#include +#include +#include #include diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c index 4e6239726aae..1322851d1acb 100644 --- a/arch/arm/mach-s3c2410/clock.c +++ b/arch/arm/mach-s3c2410/clock.c @@ -34,12 +34,12 @@ #include -#include +#include #include #include -#include -#include +#include +#include #include #include diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c index 8f12e855ef5f..8730797749e3 100644 --- a/arch/arm/mach-s3c2410/dma.c +++ b/arch/arm/mach-s3c2410/dma.c @@ -18,17 +18,17 @@ #include #include -#include +#include #include #include #include -#include +#include #include -#include -#include -#include +#include +#include +#include #include #include diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c index d15621ef5b67..c6eefb1d590c 100644 --- a/arch/arm/mach-s3c2410/gpio.c +++ b/arch/arm/mach-s3c2410/gpio.c @@ -26,11 +26,11 @@ #include #include -#include +#include #include #include -#include +#include int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on, unsigned int config) diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c index affa4fa12ac1..5a6bc56f186b 100644 --- a/arch/arm/mach-s3c2410/h1940-bluetooth.c +++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c @@ -16,9 +16,9 @@ #include #include #include -#include -#include -#include +#include +#include +#include #define DRV_NAME "h1940-bt" diff --git a/arch/arm/mach-s3c2410/include/mach/anubis-cpld.h b/arch/arm/mach-s3c2410/include/mach/anubis-cpld.h new file mode 100644 index 000000000000..1b614d5a81f3 --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/anubis-cpld.h @@ -0,0 +1,25 @@ +/* arch/arm/mach-s3c2410/include/mach/anubis-cpld.h + * + * Copyright (c) 2005 Simtec Electronics + * http://www.simtec.co.uk/products/ + * Ben Dooks + * + * ANUBIS - CPLD control constants + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_ANUBISCPLD_H +#define __ASM_ARCH_ANUBISCPLD_H + +/* CTRL2 - NAND WP control, IDE Reset assert/check */ + +#define ANUBIS_CTRL1_NANDSEL (0x3) + +/* IDREG - revision */ + +#define ANUBIS_IDREG_REVMASK (0x7) + +#endif /* __ASM_ARCH_ANUBISCPLD_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/anubis-irq.h b/arch/arm/mach-s3c2410/include/mach/anubis-irq.h new file mode 100644 index 000000000000..a2a328134e34 --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/anubis-irq.h @@ -0,0 +1,21 @@ +/* arch/arm/mach-s3c2410/include/mach/anubis-irq.h + * + * Copyright (c) 2005 Simtec Electronics + * http://www.simtec.co.uk/products/ + * Ben Dooks + * + * ANUBIS - IRQ Number definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_ANUBISIRQ_H +#define __ASM_ARCH_ANUBISIRQ_H + +#define IRQ_IDE0 IRQ_EINT2 +#define IRQ_IDE1 IRQ_EINT3 +#define IRQ_ASIX IRQ_EINT1 + +#endif /* __ASM_ARCH_ANUBISIRQ_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/anubis-map.h b/arch/arm/mach-s3c2410/include/mach/anubis-map.h new file mode 100644 index 000000000000..c9deb3a5b2c3 --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/anubis-map.h @@ -0,0 +1,38 @@ +/* arch/arm/mach-s3c2410/include/mach/anubis-map.h + * + * Copyright (c) 2005 Simtec Electronics + * http://www.simtec.co.uk/products/ + * Ben Dooks + * + * ANUBIS - Memory map definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* needs arch/map.h including with this */ + +#ifndef __ASM_ARCH_ANUBISMAP_H +#define __ASM_ARCH_ANUBISMAP_H + +/* start peripherals off after the S3C2410 */ + +#define ANUBIS_IOADDR(x) (S3C2410_ADDR((x) + 0x01800000)) + +#define ANUBIS_PA_CPLD (S3C2410_CS1 | (1<<26)) + +/* we put the CPLD registers next, to get them out of the way */ + +#define ANUBIS_VA_CTRL1 ANUBIS_IOADDR(0x00000000) /* 0x01800000 */ +#define ANUBIS_PA_CTRL1 (ANUBIS_PA_CPLD) + +#define ANUBIS_VA_IDREG ANUBIS_IOADDR(0x00300000) /* 0x01B00000 */ +#define ANUBIS_PA_IDREG (ANUBIS_PA_CPLD + (3<<23)) + +#define ANUBIS_IDEPRI ANUBIS_IOADDR(0x01000000) +#define ANUBIS_IDEPRIAUX ANUBIS_IOADDR(0x01100000) +#define ANUBIS_IDESEC ANUBIS_IOADDR(0x01200000) +#define ANUBIS_IDESECAUX ANUBIS_IOADDR(0x01300000) + +#endif /* __ASM_ARCH_ANUBISMAP_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/audio.h b/arch/arm/mach-s3c2410/include/mach/audio.h new file mode 100644 index 000000000000..de0e8da48bc3 --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/audio.h @@ -0,0 +1,45 @@ +/* arch/arm/mach-s3c2410/include/mach/audio.h + * + * Copyright (c) 2004-2005 Simtec Electronics + * http://www.simtec.co.uk/products/SWLINUX/ + * Ben Dooks + * + * S3C24XX - Audio platfrom_device info + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_AUDIO_H +#define __ASM_ARCH_AUDIO_H __FILE__ + +/* struct s3c24xx_iis_ops + * + * called from the s3c24xx audio core to deal with the architecture + * or the codec's setup and control. + * + * the pointer to itself is passed through in case the caller wants to + * embed this in an larger structure for easy reference to it's context. +*/ + +struct s3c24xx_iis_ops { + struct module *owner; + + int (*startup)(struct s3c24xx_iis_ops *me); + void (*shutdown)(struct s3c24xx_iis_ops *me); + int (*suspend)(struct s3c24xx_iis_ops *me); + int (*resume)(struct s3c24xx_iis_ops *me); + + int (*open)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm); + int (*close)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm); + int (*prepare)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm, struct snd_pcm_runtime *rt); +}; + +struct s3c24xx_platdata_iis { + const char *codec_clk; + struct s3c24xx_iis_ops *ops; + int (*match_dev)(struct device *dev); +}; + +#endif /* __ASM_ARCH_AUDIO_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/bast-cpld.h b/arch/arm/mach-s3c2410/include/mach/bast-cpld.h new file mode 100644 index 000000000000..20493b048360 --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/bast-cpld.h @@ -0,0 +1,53 @@ +/* arch/arm/mach-s3c2410/include/mach/bast-cpld.h + * + * Copyright (c) 2003,2004 Simtec Electronics + * Ben Dooks + * + * BAST - CPLD control constants + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_BASTCPLD_H +#define __ASM_ARCH_BASTCPLD_H + +/* CTRL1 - Audio LR routing */ + +#define BAST_CPLD_CTRL1_LRCOFF (0x00) +#define BAST_CPLD_CTRL1_LRCADC (0x01) +#define BAST_CPLD_CTRL1_LRCDAC (0x02) +#define BAST_CPLD_CTRL1_LRCARM (0x03) +#define BAST_CPLD_CTRL1_LRMASK (0x03) + +/* CTRL2 - NAND WP control, IDE Reset assert/check */ + +#define BAST_CPLD_CTRL2_WNAND (0x04) +#define BAST_CPLD_CTLR2_IDERST (0x08) + +/* CTRL3 - rom write control, CPLD identity */ + +#define BAST_CPLD_CTRL3_IDMASK (0x0e) +#define BAST_CPLD_CTRL3_ROMWEN (0x01) + +/* CTRL4 - 8bit LCD interface control/status */ + +#define BAST_CPLD_CTRL4_LLAT (0x01) +#define BAST_CPLD_CTRL4_LCDRW (0x02) +#define BAST_CPLD_CTRL4_LCDCMD (0x04) +#define BAST_CPLD_CTRL4_LCDE2 (0x01) + +/* CTRL5 - DMA routing */ + +#define BAST_CPLD_DMA0_PRIIDE (0<<0) +#define BAST_CPLD_DMA0_SECIDE (1<<0) +#define BAST_CPLD_DMA0_ISA15 (2<<0) +#define BAST_CPLD_DMA0_ISA36 (3<<0) + +#define BAST_CPLD_DMA1_PRIIDE (0<<2) +#define BAST_CPLD_DMA1_SECIDE (1<<2) +#define BAST_CPLD_DMA1_ISA15 (2<<2) +#define BAST_CPLD_DMA1_ISA36 (3<<2) + +#endif /* __ASM_ARCH_BASTCPLD_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/bast-irq.h b/arch/arm/mach-s3c2410/include/mach/bast-irq.h new file mode 100644 index 000000000000..501c202b53cf --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/bast-irq.h @@ -0,0 +1,29 @@ +/* arch/arm/mach-s3c2410/include/mach/bast-irq.h + * + * Copyright (c) 2003,2004 Simtec Electronics + * Ben Dooks + * + * Machine BAST - IRQ Number definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_BASTIRQ_H +#define __ASM_ARCH_BASTIRQ_H + +/* irq numbers to onboard peripherals */ + +#define IRQ_USBOC IRQ_EINT18 +#define IRQ_IDE0 IRQ_EINT16 +#define IRQ_IDE1 IRQ_EINT17 +#define IRQ_PCSERIAL1 IRQ_EINT15 +#define IRQ_PCSERIAL2 IRQ_EINT14 +#define IRQ_PCPARALLEL IRQ_EINT13 +#define IRQ_ASIX IRQ_EINT11 +#define IRQ_DM9000 IRQ_EINT10 +#define IRQ_ISA IRQ_EINT9 +#define IRQ_SMALERT IRQ_EINT8 + +#endif /* __ASM_ARCH_BASTIRQ_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/bast-map.h b/arch/arm/mach-s3c2410/include/mach/bast-map.h new file mode 100644 index 000000000000..c2c5baf07345 --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/bast-map.h @@ -0,0 +1,146 @@ +/* arch/arm/mach-s3c2410/include/mach/bast-map.h + * + * Copyright (c) 2003,2004 Simtec Electronics + * Ben Dooks + * + * Machine BAST - Memory map definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* needs arch/map.h including with this */ + +/* ok, we've used up to 0x13000000, now we need to find space for the + * peripherals that live in the nGCS[x] areas, which are quite numerous + * in their space. We also have the board's CPLD to find register space + * for. + */ + +#ifndef __ASM_ARCH_BASTMAP_H +#define __ASM_ARCH_BASTMAP_H + +#define BAST_IOADDR(x) (S3C2410_ADDR((x) + 0x01300000)) + +/* we put the CPLD registers next, to get them out of the way */ + +#define BAST_VA_CTRL1 BAST_IOADDR(0x00000000) /* 0x01300000 */ +#define BAST_PA_CTRL1 (S3C2410_CS5 | 0x7800000) + +#define BAST_VA_CTRL2 BAST_IOADDR(0x00100000) /* 0x01400000 */ +#define BAST_PA_CTRL2 (S3C2410_CS1 | 0x6000000) + +#define BAST_VA_CTRL3 BAST_IOADDR(0x00200000) /* 0x01500000 */ +#define BAST_PA_CTRL3 (S3C2410_CS1 | 0x6800000) + +#define BAST_VA_CTRL4 BAST_IOADDR(0x00300000) /* 0x01600000 */ +#define BAST_PA_CTRL4 (S3C2410_CS1 | 0x7000000) + +/* next, we have the PC104 ISA interrupt registers */ + +#define BAST_PA_PC104_IRQREQ (S3C2410_CS5 | 0x6000000) /* 0x01700000 */ +#define BAST_VA_PC104_IRQREQ BAST_IOADDR(0x00400000) + +#define BAST_PA_PC104_IRQRAW (S3C2410_CS5 | 0x6800000) /* 0x01800000 */ +#define BAST_VA_PC104_IRQRAW BAST_IOADDR(0x00500000) + +#define BAST_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000) /* 0x01900000 */ +#define BAST_VA_PC104_IRQMASK BAST_IOADDR(0x00600000) + +#define BAST_PA_LCD_RCMD1 (0x8800000) +#define BAST_VA_LCD_RCMD1 BAST_IOADDR(0x00700000) + +#define BAST_PA_LCD_WCMD1 (0x8000000) +#define BAST_VA_LCD_WCMD1 BAST_IOADDR(0x00800000) + +#define BAST_PA_LCD_RDATA1 (0x9800000) +#define BAST_VA_LCD_RDATA1 BAST_IOADDR(0x00900000) + +#define BAST_PA_LCD_WDATA1 (0x9000000) +#define BAST_VA_LCD_WDATA1 BAST_IOADDR(0x00A00000) + +#define BAST_PA_LCD_RCMD2 (0xA800000) +#define BAST_VA_LCD_RCMD2 BAST_IOADDR(0x00B00000) + +#define BAST_PA_LCD_WCMD2 (0xA000000) +#define BAST_VA_LCD_WCMD2 BAST_IOADDR(0x00C00000) + +#define BAST_PA_LCD_RDATA2 (0xB800000) +#define BAST_VA_LCD_RDATA2 BAST_IOADDR(0x00D00000) + +#define BAST_PA_LCD_WDATA2 (0xB000000) +#define BAST_VA_LCD_WDATA2 BAST_IOADDR(0x00E00000) + + +/* 0xE0000000 contains the IO space that is split by speed and + * wether the access is for 8 or 16bit IO... this ensures that + * the correct access is made + * + * 0x10000000 of space, partitioned as so: + * + * 0x00000000 to 0x04000000 8bit, slow + * 0x04000000 to 0x08000000 16bit, slow + * 0x08000000 to 0x0C000000 16bit, net + * 0x0C000000 to 0x10000000 16bit, fast + * + * each of these spaces has the following in: + * + * 0x00000000 to 0x01000000 16MB ISA IO space + * 0x01000000 to 0x02000000 16MB ISA memory space + * 0x02000000 to 0x02100000 1MB IDE primary channel + * 0x02100000 to 0x02200000 1MB IDE primary channel aux + * 0x02200000 to 0x02400000 1MB IDE secondary channel + * 0x02300000 to 0x02400000 1MB IDE secondary channel aux + * 0x02400000 to 0x02500000 1MB ASIX ethernet controller + * 0x02500000 to 0x02600000 1MB Davicom DM9000 ethernet controller + * 0x02600000 to 0x02700000 1MB PC SuperIO controller + * + * the phyiscal layout of the zones are: + * nGCS2 - 8bit, slow + * nGCS3 - 16bit, slow + * nGCS4 - 16bit, net + * nGCS5 - 16bit, fast + */ + +#define BAST_VA_MULTISPACE (0xE0000000) + +#define BAST_VA_ISAIO (BAST_VA_MULTISPACE + 0x00000000) +#define BAST_VA_ISAMEM (BAST_VA_MULTISPACE + 0x01000000) +#define BAST_VA_IDEPRI (BAST_VA_MULTISPACE + 0x02000000) +#define BAST_VA_IDEPRIAUX (BAST_VA_MULTISPACE + 0x02100000) +#define BAST_VA_IDESEC (BAST_VA_MULTISPACE + 0x02200000) +#define BAST_VA_IDESECAUX (BAST_VA_MULTISPACE + 0x02300000) +#define BAST_VA_ASIXNET (BAST_VA_MULTISPACE + 0x02400000) +#define BAST_VA_DM9000 (BAST_VA_MULTISPACE + 0x02500000) +#define BAST_VA_SUPERIO (BAST_VA_MULTISPACE + 0x02600000) + +#define BAST_VA_MULTISPACE (0xE0000000) + +#define BAST_VAM_CS2 (0x00000000) +#define BAST_VAM_CS3 (0x04000000) +#define BAST_VAM_CS4 (0x08000000) +#define BAST_VAM_CS5 (0x0C000000) + +/* physical offset addresses for the peripherals */ + +#define BAST_PA_ISAIO (0x00000000) +#define BAST_PA_ASIXNET (0x01000000) +#define BAST_PA_SUPERIO (0x01800000) +#define BAST_PA_IDEPRI (0x02000000) +#define BAST_PA_IDEPRIAUX (0x02800000) +#define BAST_PA_IDESEC (0x03000000) +#define BAST_PA_IDESECAUX (0x03800000) +#define BAST_PA_ISAMEM (0x04000000) +#define BAST_PA_DM9000 (0x05000000) + +/* some configurations for the peripherals */ + +#define BAST_PCSIO (BAST_VA_SUPERIO + BAST_VAM_CS2) +/* */ + +#define BAST_ASIXNET_CS BAST_VAM_CS5 +#define BAST_IDE_CS BAST_VAM_CS5 +#define BAST_DM9000_CS BAST_VAM_CS4 + +#endif /* __ASM_ARCH_BASTMAP_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/bast-pmu.h b/arch/arm/mach-s3c2410/include/mach/bast-pmu.h new file mode 100644 index 000000000000..61684cb8ce59 --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/bast-pmu.h @@ -0,0 +1,40 @@ +/* arch/arm/mach-s3c2410/include/mach/bast-pmu.h + * + * Copyright (c) 2003,2004 Simtec Electronics + * Ben Dooks + * Vincent Sanders + * + * Machine BAST - Power Management chip + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_BASTPMU_H +#define __ASM_ARCH_BASTPMU_H "08_OCT_2004" + +#define BASTPMU_REG_IDENT (0x00) +#define BASTPMU_REG_VERSION (0x01) +#define BASTPMU_REG_DDCCTRL (0x02) +#define BASTPMU_REG_POWER (0x03) +#define BASTPMU_REG_RESET (0x04) +#define BASTPMU_REG_GWO (0x05) +#define BASTPMU_REG_WOL (0x06) +#define BASTPMU_REG_WOR (0x07) +#define BASTPMU_REG_UID (0x09) + +#define BASTPMU_EEPROM (0xC0) + +#define BASTPMU_EEP_UID (BASTPMU_EEPROM + 0) +#define BASTPMU_EEP_WOL (BASTPMU_EEPROM + 8) +#define BASTPMU_EEP_WOR (BASTPMU_EEPROM + 9) + +#define BASTPMU_IDENT_0 0x53 +#define BASTPMU_IDENT_1 0x42 +#define BASTPMU_IDENT_2 0x50 +#define BASTPMU_IDENT_3 0x4d + +#define BASTPMU_RESET_GUARD (0x55) + +#endif /* __ASM_ARCH_BASTPMU_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/debug-macro.S b/arch/arm/mach-s3c2410/include/mach/debug-macro.S new file mode 100644 index 000000000000..682df23087ab --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/debug-macro.S @@ -0,0 +1,102 @@ +/* arch/arm/mach-s3c2410/include/mach/debug-macro.S + * + * Debugging macro include header + * + * Copyright (C) 1994-1999 Russell King + * Copyright (C) 2005 Simtec Electronics + * + * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include + +#define S3C2410_UART1_OFF (0x4000) +#define SHIFT_2440TXF (14-9) + + .macro addruart, rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 + ldreq \rx, = S3C24XX_PA_UART + ldrne \rx, = S3C24XX_VA_UART +#if CONFIG_DEBUG_S3C_UART != 0 + add \rx, \rx, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART) +#endif + .endm + + .macro fifo_full_s3c24xx rd, rx + @ check for arm920 vs arm926. currently assume all arm926 + @ devices have an 64 byte FIFO identical to the s3c2440 + mrc p15, 0, \rd, c0, c0 + and \rd, \rd, #0xff0 + teq \rd, #0x260 + beq 1004f + mrc p15, 0, \rd, c1, c0 + tst \rd, #1 + addeq \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART) + addne \rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART) + bic \rd, \rd, #0xff000 + ldr \rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ] + and \rd, \rd, #0x00ff0000 + teq \rd, #0x00440000 @ is it 2440? +1004: + ldr \rd, [ \rx, # S3C2410_UFSTAT ] + moveq \rd, \rd, lsr #SHIFT_2440TXF + tst \rd, #S3C2410_UFSTAT_TXFULL + .endm + + .macro fifo_full_s3c2410 rd, rx + ldr \rd, [ \rx, # S3C2410_UFSTAT ] + tst \rd, #S3C2410_UFSTAT_TXFULL + .endm + +/* fifo level reading */ + + .macro fifo_level_s3c24xx rd, rx + @ check for arm920 vs arm926. currently assume all arm926 + @ devices have an 64 byte FIFO identical to the s3c2440 + mrc p15, 0, \rd, c0, c0 + and \rd, \rd, #0xff0 + teq \rd, #0x260 + beq 10000f + mrc p15, 0, \rd, c1, c0 + tst \rd, #1 + addeq \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART) + addne \rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART) + bic \rd, \rd, #0xff000 + ldr \rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ] + and \rd, \rd, #0x00ff0000 + teq \rd, #0x00440000 @ is it 2440? + +10000: + ldr \rd, [ \rx, # S3C2410_UFSTAT ] + andne \rd, \rd, #S3C2410_UFSTAT_TXMASK + andeq \rd, \rd, #S3C2440_UFSTAT_TXMASK + .endm + + .macro fifo_level_s3c2410 rd, rx + ldr \rd, [ \rx, # S3C2410_UFSTAT ] + and \rd, \rd, #S3C2410_UFSTAT_TXMASK + .endm + +/* Select the correct implementation depending on the configuration. The + * S3C2440 will get selected by default, as these are the most widely + * used variants of these +*/ + +#if defined(CONFIG_CPU_LLSERIAL_S3C2410_ONLY) +#define fifo_full fifo_full_s3c2410 +#define fifo_level fifo_level_s3c2410 +#elif !defined(CONFIG_CPU_LLSERIAL_S3C2440_ONLY) +#define fifo_full fifo_full_s3c24xx +#define fifo_level fifo_level_s3c24xx +#endif + +/* include the reset of the code which will do the work */ + +#include diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h new file mode 100644 index 000000000000..891b53cd69b8 --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/dma.h @@ -0,0 +1,453 @@ +/* arch/arm/mach-s3c2410/include/mach/dma.h + * + * Copyright (C) 2003,2004,2006 Simtec Electronics + * Ben Dooks + * + * Samsung S3C241XX DMA support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_DMA_H +#define __ASM_ARCH_DMA_H __FILE__ + +#include +#include + +/* + * This is the maximum DMA address(physical address) that can be DMAd to. + * + */ +#define MAX_DMA_ADDRESS 0x40000000 +#define MAX_DMA_TRANSFER_SIZE 0x100000 /* Data Unit is half word */ + +/* We use `virtual` dma channels to hide the fact we have only a limited + * number of DMA channels, and not of all of them (dependant on the device) + * can be attached to any DMA source. We therefore let the DMA core handle + * the allocation of hardware channels to clients. +*/ + +enum dma_ch { + DMACH_XD0, + DMACH_XD1, + DMACH_SDI, + DMACH_SPI0, + DMACH_SPI1, + DMACH_UART0, + DMACH_UART1, + DMACH_UART2, + DMACH_TIMER, + DMACH_I2S_IN, + DMACH_I2S_OUT, + DMACH_PCM_IN, + DMACH_PCM_OUT, + DMACH_MIC_IN, + DMACH_USB_EP1, + DMACH_USB_EP2, + DMACH_USB_EP3, + DMACH_USB_EP4, + DMACH_UART0_SRC2, /* s3c2412 second uart sources */ + DMACH_UART1_SRC2, + DMACH_UART2_SRC2, + DMACH_UART3, /* s3c2443 has extra uart */ + DMACH_UART3_SRC2, + DMACH_MAX, /* the end entry */ +}; + +#define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */ + +/* we have 4 dma channels */ +#ifndef CONFIG_CPU_S3C2443 +#define S3C2410_DMA_CHANNELS (4) +#else +#define S3C2410_DMA_CHANNELS (6) +#endif + +/* types */ + +enum s3c2410_dma_state { + S3C2410_DMA_IDLE, + S3C2410_DMA_RUNNING, + S3C2410_DMA_PAUSED +}; + + +/* enum s3c2410_dma_loadst + * + * This represents the state of the DMA engine, wrt to the loaded / running + * transfers. Since we don't have any way of knowing exactly the state of + * the DMA transfers, we need to know the state to make decisions on wether + * we can + * + * S3C2410_DMA_NONE + * + * There are no buffers loaded (the channel should be inactive) + * + * S3C2410_DMA_1LOADED + * + * There is one buffer loaded, however it has not been confirmed to be + * loaded by the DMA engine. This may be because the channel is not + * yet running, or the DMA driver decided that it was too costly to + * sit and wait for it to happen. + * + * S3C2410_DMA_1RUNNING + * + * The buffer has been confirmed running, and not finisged + * + * S3C2410_DMA_1LOADED_1RUNNING + * + * There is a buffer waiting to be loaded by the DMA engine, and one + * currently running. +*/ + +enum s3c2410_dma_loadst { + S3C2410_DMALOAD_NONE, + S3C2410_DMALOAD_1LOADED, + S3C2410_DMALOAD_1RUNNING, + S3C2410_DMALOAD_1LOADED_1RUNNING, +}; + +enum s3c2410_dma_buffresult { + S3C2410_RES_OK, + S3C2410_RES_ERR, + S3C2410_RES_ABORT +}; + +enum s3c2410_dmasrc { + S3C2410_DMASRC_HW, /* source is memory */ + S3C2410_DMASRC_MEM /* source is hardware */ +}; + +/* enum s3c2410_chan_op + * + * operation codes passed to the DMA code by the user, and also used + * to inform the current channel owner of any changes to the system state +*/ + +enum s3c2410_chan_op { + S3C2410_DMAOP_START, + S3C2410_DMAOP_STOP, + S3C2410_DMAOP_PAUSE, + S3C2410_DMAOP_RESUME, + S3C2410_DMAOP_FLUSH, + S3C2410_DMAOP_TIMEOUT, /* internal signal to handler */ + S3C2410_DMAOP_STARTED, /* indicate channel started */ +}; + +/* flags */ + +#define S3C2410_DMAF_SLOW (1<<0) /* slow, so don't worry about + * waiting for reloads */ +#define S3C2410_DMAF_AUTOSTART (1<<1) /* auto-start if buffer queued */ + +/* dma buffer */ + +struct s3c2410_dma_client { + char *name; +}; + +/* s3c2410_dma_buf_s + * + * internally used buffer structure to describe a queued or running + * buffer. +*/ + +struct s3c2410_dma_buf; +struct s3c2410_dma_buf { + struct s3c2410_dma_buf *next; + int magic; /* magic */ + int size; /* buffer size in bytes */ + dma_addr_t data; /* start of DMA data */ + dma_addr_t ptr; /* where the DMA got to [1] */ + void *id; /* client's id */ +}; + +/* [1] is this updated for both recv/send modes? */ + +struct s3c2410_dma_chan; + +/* s3c2410_dma_cbfn_t + * + * buffer callback routine type +*/ + +typedef void (*s3c2410_dma_cbfn_t)(struct s3c2410_dma_chan *, + void *buf, int size, + enum s3c2410_dma_buffresult result); + +typedef int (*s3c2410_dma_opfn_t)(struct s3c2410_dma_chan *, + enum s3c2410_chan_op ); + +struct s3c2410_dma_stats { + unsigned long loads; + unsigned long timeout_longest; + unsigned long timeout_shortest; + unsigned long timeout_avg; + unsigned long timeout_failed; +}; + +struct s3c2410_dma_map; + +/* struct s3c2410_dma_chan + * + * full state information for each DMA channel +*/ + +struct s3c2410_dma_chan { + /* channel state flags and information */ + unsigned char number; /* number of this dma channel */ + unsigned char in_use; /* channel allocated */ + unsigned char irq_claimed; /* irq claimed for channel */ + unsigned char irq_enabled; /* irq enabled for channel */ + unsigned char xfer_unit; /* size of an transfer */ + + /* channel state */ + + enum s3c2410_dma_state state; + enum s3c2410_dma_loadst load_state; + struct s3c2410_dma_client *client; + + /* channel configuration */ + enum s3c2410_dmasrc source; + unsigned long dev_addr; + unsigned long load_timeout; + unsigned int flags; /* channel flags */ + unsigned int hw_cfg; /* last hw config */ + + struct s3c24xx_dma_map *map; /* channel hw maps */ + + /* channel's hardware position and configuration */ + void __iomem *regs; /* channels registers */ + void __iomem *addr_reg; /* data address register */ + unsigned int irq; /* channel irq */ + unsigned long dcon; /* default value of DCON */ + + /* driver handles */ + s3c2410_dma_cbfn_t callback_fn; /* buffer done callback */ + s3c2410_dma_opfn_t op_fn; /* channel op callback */ + + /* stats gathering */ + struct s3c2410_dma_stats *stats; + struct s3c2410_dma_stats stats_store; + + /* buffer list and information */ + struct s3c2410_dma_buf *curr; /* current dma buffer */ + struct s3c2410_dma_buf *next; /* next buffer to load */ + struct s3c2410_dma_buf *end; /* end of queue */ + + /* system device */ + struct sys_device dev; +}; + +/* the currently allocated channel information */ +extern struct s3c2410_dma_chan s3c2410_chans[]; + +/* note, we don't really use dma_device_t at the moment */ +typedef unsigned long dma_device_t; + +/* functions --------------------------------------------------------------- */ + +/* s3c2410_dma_request + * + * request a dma channel exclusivley +*/ + +extern int s3c2410_dma_request(dmach_t channel, + struct s3c2410_dma_client *, void *dev); + + +/* s3c2410_dma_ctrl + * + * change the state of the dma channel +*/ + +extern int s3c2410_dma_ctrl(dmach_t channel, enum s3c2410_chan_op op); + +/* s3c2410_dma_setflags + * + * set the channel's flags to a given state +*/ + +extern int s3c2410_dma_setflags(dmach_t channel, + unsigned int flags); + +/* s3c2410_dma_free + * + * free the dma channel (will also abort any outstanding operations) +*/ + +extern int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *); + +/* s3c2410_dma_enqueue + * + * place the given buffer onto the queue of operations for the channel. + * The buffer must be allocated from dma coherent memory, or the Dcache/WB + * drained before the buffer is given to the DMA system. +*/ + +extern int s3c2410_dma_enqueue(dmach_t channel, void *id, + dma_addr_t data, int size); + +/* s3c2410_dma_config + * + * configure the dma channel +*/ + +extern int s3c2410_dma_config(dmach_t channel, int xferunit, int dcon); + +/* s3c2410_dma_devconfig + * + * configure the device we're talking to +*/ + +extern int s3c2410_dma_devconfig(int channel, enum s3c2410_dmasrc source, + int hwcfg, unsigned long devaddr); + +/* s3c2410_dma_getposition + * + * get the position that the dma transfer is currently at +*/ + +extern int s3c2410_dma_getposition(dmach_t channel, + dma_addr_t *src, dma_addr_t *dest); + +extern int s3c2410_dma_set_opfn(dmach_t, s3c2410_dma_opfn_t rtn); +extern int s3c2410_dma_set_buffdone_fn(dmach_t, s3c2410_dma_cbfn_t rtn); + +/* DMA Register definitions */ + +#define S3C2410_DMA_DISRC (0x00) +#define S3C2410_DMA_DISRCC (0x04) +#define S3C2410_DMA_DIDST (0x08) +#define S3C2410_DMA_DIDSTC (0x0C) +#define S3C2410_DMA_DCON (0x10) +#define S3C2410_DMA_DSTAT (0x14) +#define S3C2410_DMA_DCSRC (0x18) +#define S3C2410_DMA_DCDST (0x1C) +#define S3C2410_DMA_DMASKTRIG (0x20) +#define S3C2412_DMA_DMAREQSEL (0x24) +#define S3C2443_DMA_DMAREQSEL (0x24) + +#define S3C2410_DISRCC_INC (1<<0) +#define S3C2410_DISRCC_APB (1<<1) + +#define S3C2410_DMASKTRIG_STOP (1<<2) +#define S3C2410_DMASKTRIG_ON (1<<1) +#define S3C2410_DMASKTRIG_SWTRIG (1<<0) + +#define S3C2410_DCON_DEMAND (0<<31) +#define S3C2410_DCON_HANDSHAKE (1<<31) +#define S3C2410_DCON_SYNC_PCLK (0<<30) +#define S3C2410_DCON_SYNC_HCLK (1<<30) + +#define S3C2410_DCON_INTREQ (1<<29) + +#define S3C2410_DCON_CH0_XDREQ0 (0<<24) +#define S3C2410_DCON_CH0_UART0 (1<<24) +#define S3C2410_DCON_CH0_SDI (2<<24) +#define S3C2410_DCON_CH0_TIMER (3<<24) +#define S3C2410_DCON_CH0_USBEP1 (4<<24) + +#define S3C2410_DCON_CH1_XDREQ1 (0<<24) +#define S3C2410_DCON_CH1_UART1 (1<<24) +#define S3C2410_DCON_CH1_I2SSDI (2<<24) +#define S3C2410_DCON_CH1_SPI (3<<24) +#define S3C2410_DCON_CH1_USBEP2 (4<<24) + +#define S3C2410_DCON_CH2_I2SSDO (0<<24) +#define S3C2410_DCON_CH2_I2SSDI (1<<24) +#define S3C2410_DCON_CH2_SDI (2<<24) +#define S3C2410_DCON_CH2_TIMER (3<<24) +#define S3C2410_DCON_CH2_USBEP3 (4<<24) + +#define S3C2410_DCON_CH3_UART2 (0<<24) +#define S3C2410_DCON_CH3_SDI (1<<24) +#define S3C2410_DCON_CH3_SPI (2<<24) +#define S3C2410_DCON_CH3_TIMER (3<<24) +#define S3C2410_DCON_CH3_USBEP4 (4<<24) + +#define S3C2410_DCON_SRCSHIFT (24) +#define S3C2410_DCON_SRCMASK (7<<24) + +#define S3C2410_DCON_BYTE (0<<20) +#define S3C2410_DCON_HALFWORD (1<<20) +#define S3C2410_DCON_WORD (2<<20) + +#define S3C2410_DCON_AUTORELOAD (0<<22) +#define S3C2410_DCON_NORELOAD (1<<22) +#define S3C2410_DCON_HWTRIG (1<<23) + +#ifdef CONFIG_CPU_S3C2440 +#define S3C2440_DIDSTC_CHKINT (1<<2) + +#define S3C2440_DCON_CH0_I2SSDO (5<<24) +#define S3C2440_DCON_CH0_PCMIN (6<<24) + +#define S3C2440_DCON_CH1_PCMOUT (5<<24) +#define S3C2440_DCON_CH1_SDI (6<<24) + +#define S3C2440_DCON_CH2_PCMIN (5<<24) +#define S3C2440_DCON_CH2_MICIN (6<<24) + +#define S3C2440_DCON_CH3_MICIN (5<<24) +#define S3C2440_DCON_CH3_PCMOUT (6<<24) +#endif + +#ifdef CONFIG_CPU_S3C2412 + +#define S3C2412_DMAREQSEL_SRC(x) ((x)<<1) + +#define S3C2412_DMAREQSEL_HW (1) + +#define S3C2412_DMAREQSEL_SPI0TX S3C2412_DMAREQSEL_SRC(0) +#define S3C2412_DMAREQSEL_SPI0RX S3C2412_DMAREQSEL_SRC(1) +#define S3C2412_DMAREQSEL_SPI1TX S3C2412_DMAREQSEL_SRC(2) +#define S3C2412_DMAREQSEL_SPI1RX S3C2412_DMAREQSEL_SRC(3) +#define S3C2412_DMAREQSEL_I2STX S3C2412_DMAREQSEL_SRC(4) +#define S3C2412_DMAREQSEL_I2SRX S3C2412_DMAREQSEL_SRC(5) +#define S3C2412_DMAREQSEL_TIMER S3C2412_DMAREQSEL_SRC(9) +#define S3C2412_DMAREQSEL_SDI S3C2412_DMAREQSEL_SRC(10) +#define S3C2412_DMAREQSEL_USBEP1 S3C2412_DMAREQSEL_SRC(13) +#define S3C2412_DMAREQSEL_USBEP2 S3C2412_DMAREQSEL_SRC(14) +#define S3C2412_DMAREQSEL_USBEP3 S3C2412_DMAREQSEL_SRC(15) +#define S3C2412_DMAREQSEL_USBEP4 S3C2412_DMAREQSEL_SRC(16) +#define S3C2412_DMAREQSEL_XDREQ0 S3C2412_DMAREQSEL_SRC(17) +#define S3C2412_DMAREQSEL_XDREQ1 S3C2412_DMAREQSEL_SRC(18) +#define S3C2412_DMAREQSEL_UART0_0 S3C2412_DMAREQSEL_SRC(19) +#define S3C2412_DMAREQSEL_UART0_1 S3C2412_DMAREQSEL_SRC(20) +#define S3C2412_DMAREQSEL_UART1_0 S3C2412_DMAREQSEL_SRC(21) +#define S3C2412_DMAREQSEL_UART1_1 S3C2412_DMAREQSEL_SRC(22) +#define S3C2412_DMAREQSEL_UART2_0 S3C2412_DMAREQSEL_SRC(23) +#define S3C2412_DMAREQSEL_UART2_1 S3C2412_DMAREQSEL_SRC(24) + +#endif + +#define S3C2443_DMAREQSEL_SRC(x) ((x)<<1) + +#define S3C2443_DMAREQSEL_HW (1) + +#define S3C2443_DMAREQSEL_SPI0TX S3C2443_DMAREQSEL_SRC(0) +#define S3C2443_DMAREQSEL_SPI0RX S3C2443_DMAREQSEL_SRC(1) +#define S3C2443_DMAREQSEL_SPI1TX S3C2443_DMAREQSEL_SRC(2) +#define S3C2443_DMAREQSEL_SPI1RX S3C2443_DMAREQSEL_SRC(3) +#define S3C2443_DMAREQSEL_I2STX S3C2443_DMAREQSEL_SRC(4) +#define S3C2443_DMAREQSEL_I2SRX S3C2443_DMAREQSEL_SRC(5) +#define S3C2443_DMAREQSEL_TIMER S3C2443_DMAREQSEL_SRC(9) +#define S3C2443_DMAREQSEL_SDI S3C2443_DMAREQSEL_SRC(10) +#define S3C2443_DMAREQSEL_XDREQ0 S3C2443_DMAREQSEL_SRC(17) +#define S3C2443_DMAREQSEL_XDREQ1 S3C2443_DMAREQSEL_SRC(18) +#define S3C2443_DMAREQSEL_UART0_0 S3C2443_DMAREQSEL_SRC(19) +#define S3C2443_DMAREQSEL_UART0_1 S3C2443_DMAREQSEL_SRC(20) +#define S3C2443_DMAREQSEL_UART1_0 S3C2443_DMAREQSEL_SRC(21) +#define S3C2443_DMAREQSEL_UART1_1 S3C2443_DMAREQSEL_SRC(22) +#define S3C2443_DMAREQSEL_UART2_0 S3C2443_DMAREQSEL_SRC(23) +#define S3C2443_DMAREQSEL_UART2_1 S3C2443_DMAREQSEL_SRC(24) +#define S3C2443_DMAREQSEL_UART3_0 S3C2443_DMAREQSEL_SRC(25) +#define S3C2443_DMAREQSEL_UART3_1 S3C2443_DMAREQSEL_SRC(26) +#define S3C2443_DMAREQSEL_PCMOUT S3C2443_DMAREQSEL_SRC(27) +#define S3C2443_DMAREQSEL_PCMIN S3C2443_DMAREQSEL_SRC(28) +#define S3C2443_DMAREQSEL_MICIN S3C2443_DMAREQSEL_SRC(29) + +#endif /* __ASM_ARCH_DMA_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/entry-macro.S b/arch/arm/mach-s3c2410/include/mach/entry-macro.S new file mode 100644 index 000000000000..473b3cd37d9b --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/entry-macro.S @@ -0,0 +1,78 @@ +/* + * arch/arm/mach-s3c2410/include/mach/entry-macro.S + * + * Low-level IRQ helper macros for S3C2410-based platforms + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. +*/ + +/* We have a problem that the INTOFFSET register does not always + * show one interrupt. Occasionally we get two interrupts through + * the prioritiser, and this causes the INTOFFSET register to show + * what looks like the logical-or of the two interrupt numbers. + * + * Thanks to Klaus, Shannon, et al for helping to debug this problem +*/ + +#define INTPND (0x10) +#define INTOFFSET (0x14) + +#include +#include + + .macro get_irqnr_preamble, base, tmp + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + + mov \base, #S3C24XX_VA_IRQ + + @@ try the interrupt offset register, since it is there + + ldr \irqstat, [ \base, #INTPND ] + teq \irqstat, #0 + beq 1002f + ldr \irqnr, [ \base, #INTOFFSET ] + mov \tmp, #1 + tst \irqstat, \tmp, lsl \irqnr + bne 1001f + + @@ the number specified is not a valid irq, so try + @@ and work it out for ourselves + + mov \irqnr, #0 @@ start here + + @@ work out which irq (if any) we got + + movs \tmp, \irqstat, lsl#16 + addeq \irqnr, \irqnr, #16 + moveq \irqstat, \irqstat, lsr#16 + tst \irqstat, #0xff + addeq \irqnr, \irqnr, #8 + moveq \irqstat, \irqstat, lsr#8 + tst \irqstat, #0xf + addeq \irqnr, \irqnr, #4 + moveq \irqstat, \irqstat, lsr#4 + tst \irqstat, #0x3 + addeq \irqnr, \irqnr, #2 + moveq \irqstat, \irqstat, lsr#2 + tst \irqstat, #0x1 + addeq \irqnr, \irqnr, #1 + + @@ we have the value +1001: + adds \irqnr, \irqnr, #IRQ_EINT0 +1002: + @@ exit here, Z flag unset if IRQ + + .endm + + /* currently don't need an disable_fiq macro */ + + .macro disable_fiq + .endm diff --git a/arch/arm/mach-s3c2410/include/mach/fb.h b/arch/arm/mach-s3c2410/include/mach/fb.h new file mode 100644 index 000000000000..eee0654eb8fb --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/fb.h @@ -0,0 +1,74 @@ +/* arch/arm/mach-s3c2410/include/mach/fb.h + * + * Copyright (c) 2004 Arnaud Patard + * + * Inspired by pxafb.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARM_FB_H +#define __ASM_ARM_FB_H + +#include + +struct s3c2410fb_hw { + unsigned long lcdcon1; + unsigned long lcdcon2; + unsigned long lcdcon3; + unsigned long lcdcon4; + unsigned long lcdcon5; +}; + +/* LCD description */ +struct s3c2410fb_display { + /* LCD type */ + unsigned type; + + /* Screen size */ + unsigned short width; + unsigned short height; + + /* Screen info */ + unsigned short xres; + unsigned short yres; + unsigned short bpp; + + unsigned pixclock; /* pixclock in picoseconds */ + unsigned short left_margin; /* value in pixels (TFT) or HCLKs (STN) */ + unsigned short right_margin; /* value in pixels (TFT) or HCLKs (STN) */ + unsigned short hsync_len; /* value in pixels (TFT) or HCLKs (STN) */ + unsigned short upper_margin; /* value in lines (TFT) or 0 (STN) */ + unsigned short lower_margin; /* value in lines (TFT) or 0 (STN) */ + unsigned short vsync_len; /* value in lines (TFT) or 0 (STN) */ + + /* lcd configuration registers */ + unsigned long lcdcon5; +}; + +struct s3c2410fb_mach_info { + + struct s3c2410fb_display *displays; /* attached diplays info */ + unsigned num_displays; /* number of defined displays */ + unsigned default_display; + + /* GPIOs */ + + unsigned long gpcup; + unsigned long gpcup_mask; + unsigned long gpccon; + unsigned long gpccon_mask; + unsigned long gpdup; + unsigned long gpdup_mask; + unsigned long gpdcon; + unsigned long gpdcon_mask; + + /* lpc3600 control register */ + unsigned long lpcsel; +}; + +extern void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *); + +#endif /* __ASM_ARM_FB_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/gpio.h b/arch/arm/mach-s3c2410/include/mach/gpio.h new file mode 100644 index 000000000000..3b52b86498a6 --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/gpio.h @@ -0,0 +1,18 @@ +/* arch/arm/mach-s3c2410/include/mach/gpio.h + * + * Copyright (c) 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * S3C2410 - GPIO lib support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value +#define gpio_cansleep __gpio_cansleep + +#include diff --git a/arch/arm/mach-s3c2410/include/mach/h1940-latch.h b/arch/arm/mach-s3c2410/include/mach/h1940-latch.h new file mode 100644 index 000000000000..d8a832729a8a --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/h1940-latch.h @@ -0,0 +1,64 @@ +/* arch/arm/mach-s3c2410/include/mach/h1940-latch.h + * + * Copyright (c) 2005 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * iPAQ H1940 series - latch definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_H1940_LATCH_H +#define __ASM_ARCH_H1940_LATCH_H + + +#ifndef __ASSEMBLY__ +#define H1940_LATCH ((void __force __iomem *)0xF8000000) +#else +#define H1940_LATCH 0xF8000000 +#endif + +#define H1940_PA_LATCH (S3C2410_CS2) + +/* SD layer latch */ + +#define H1940_LATCH_SDQ1 (1<<16) +#define H1940_LATCH_LCD_P1 (1<<17) +#define H1940_LATCH_LCD_P2 (1<<18) +#define H1940_LATCH_LCD_P3 (1<<19) +#define H1940_LATCH_MAX1698_nSHUTDOWN (1<<20) /* LCD backlight */ +#define H1940_LATCH_LED_RED (1<<21) +#define H1940_LATCH_SDQ7 (1<<22) +#define H1940_LATCH_USB_DP (1<<23) + +/* CPU layer latch */ + +#define H1940_LATCH_UDA_POWER (1<<24) +#define H1940_LATCH_AUDIO_POWER (1<<25) +#define H1940_LATCH_SM803_ENABLE (1<<26) +#define H1940_LATCH_LCD_P4 (1<<27) +#define H1940_LATCH_CPUQ5 (1<<28) /* untraced */ +#define H1940_LATCH_BLUETOOTH_POWER (1<<29) /* active high */ +#define H1940_LATCH_LED_GREEN (1<<30) +#define H1940_LATCH_LED_FLASH (1<<31) + +/* default settings */ + +#define H1940_LATCH_DEFAULT \ + H1940_LATCH_LCD_P4 | \ + H1940_LATCH_SM803_ENABLE | \ + H1940_LATCH_SDQ1 | \ + H1940_LATCH_LCD_P1 | \ + H1940_LATCH_LCD_P2 | \ + H1940_LATCH_LCD_P3 | \ + H1940_LATCH_MAX1698_nSHUTDOWN | \ + H1940_LATCH_CPUQ5 + +/* control functions */ + +extern void h1940_latch_control(unsigned int clear, unsigned int set); + +#endif /* __ASM_ARCH_H1940_LATCH_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/h1940.h b/arch/arm/mach-s3c2410/include/mach/h1940.h new file mode 100644 index 000000000000..4559784129c0 --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/h1940.h @@ -0,0 +1,21 @@ +/* arch/arm/mach-s3c2410/include/mach/h1940.h + * + * Copyright 2006 Ben Dooks + * + * H1940 definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_H1940_H +#define __ASM_ARCH_H1940_H + +#define H1940_SUSPEND_CHECKSUM (0x30003ff8) +#define H1940_SUSPEND_RESUMEAT (0x30081000) +#define H1940_SUSPEND_CHECK (0x30080000) + +extern void h1940_pm_return(void); + +#endif /* __ASM_ARCH_H1940_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/hardware.h b/arch/arm/mach-s3c2410/include/mach/hardware.h new file mode 100644 index 000000000000..74d5a1a4024c --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/hardware.h @@ -0,0 +1,137 @@ +/* arch/arm/mach-s3c2410/include/mach/hardware.h + * + * Copyright (c) 2003 Simtec Electronics + * Ben Dooks + * + * S3C2410 - hardware + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_HARDWARE_H +#define __ASM_ARCH_HARDWARE_H + +#ifndef __ASSEMBLY__ + +/* external functions for GPIO support + * + * These allow various different clients to access the same GPIO + * registers without conflicting. If your driver only owns the entire + * GPIO register, then it is safe to ioremap/__raw_{read|write} to it. +*/ + +/* s3c2410_gpio_cfgpin + * + * set the configuration of the given pin to the value passed. + * + * eg: + * s3c2410_gpio_cfgpin(S3C2410_GPA0, S3C2410_GPA0_ADDR0); + * s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1); +*/ + +extern void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function); + +extern unsigned int s3c2410_gpio_getcfg(unsigned int pin); + +/* s3c2410_gpio_getirq + * + * turn the given pin number into the corresponding IRQ number + * + * returns: + * < 0 = no interrupt for this pin + * >=0 = interrupt number for the pin +*/ + +extern int s3c2410_gpio_getirq(unsigned int pin); + +/* s3c2410_gpio_irq2pin + * + * turn the given irq number into the corresponding GPIO number + * + * returns: + * < 0 = no pin + * >=0 = gpio pin number +*/ + +extern int s3c2410_gpio_irq2pin(unsigned int irq); + +#ifdef CONFIG_CPU_S3C2400 + +extern int s3c2400_gpio_getirq(unsigned int pin); + +#endif /* CONFIG_CPU_S3C2400 */ + +/* s3c2410_gpio_irqfilter + * + * set the irq filtering on the given pin + * + * on = 0 => disable filtering + * 1 => enable filtering + * + * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with + * width of filter (0 through 63) + * + * +*/ + +extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on, + unsigned int config); + +/* s3c2410_gpio_pullup + * + * configure the pull-up control on the given pin + * + * to = 1 => disable the pull-up + * 0 => enable the pull-up + * + * eg; + * + * s3c2410_gpio_pullup(S3C2410_GPB0, 0); + * s3c2410_gpio_pullup(S3C2410_GPE8, 0); +*/ + +extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to); + +/* s3c2410_gpio_getpull + * + * Read the state of the pull-up on a given pin + * + * return: + * < 0 => error code + * 0 => enabled + * 1 => disabled +*/ + +extern int s3c2410_gpio_getpull(unsigned int pin); + +extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to); + +extern unsigned int s3c2410_gpio_getpin(unsigned int pin); + +extern unsigned int s3c2410_modify_misccr(unsigned int clr, unsigned int chg); + +#ifdef CONFIG_CPU_S3C2440 + +extern int s3c2440_set_dsc(unsigned int pin, unsigned int value); + +#endif /* CONFIG_CPU_S3C2440 */ + +#ifdef CONFIG_CPU_S3C2412 + +extern int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state); + +#endif /* CONFIG_CPU_S3C2412 */ + +#endif /* __ASSEMBLY__ */ + +#include +#include + +/* machine specific hardware definitions should go after this */ + +/* currently here until moved into config (todo) */ +#define CONFIG_NO_MULTIWORD_IO + +#endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/idle.h b/arch/arm/mach-s3c2410/include/mach/idle.h new file mode 100644 index 000000000000..e9ddd706b16e --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/idle.h @@ -0,0 +1,24 @@ +/* arch/arm/mach-s3c2410/include/mach/idle.h + * + * Copyright (c) 2004 Simtec Electronics + * http://www.simtec.co.uk/products/SWLINUX/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2410 CPU Idle controls +*/ + +#ifndef __ASM_ARCH_IDLE_H +#define __ASM_ARCH_IDLE_H __FILE__ + +/* This allows the over-ride of the default idle code, in case there + * is any other things to be done over idle (like DVS) +*/ + +extern void (*s3c24xx_idle)(void); + +extern void s3c24xx_default_idle(void); + +#endif /* __ASM_ARCH_IDLE_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/io.h b/arch/arm/mach-s3c2410/include/mach/io.h new file mode 100644 index 000000000000..9813dbf2ae4f --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/io.h @@ -0,0 +1,218 @@ +/* + * arch/arm/mach-s3c2410/include/mach/io.h + * from arch/arm/mach-rpc/include/mach/io.h + * + * Copyright (C) 1997 Russell King + * (C) 2003 Simtec Electronics +*/ + +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +#include + +#define IO_SPACE_LIMIT 0xffffffff + +/* + * We use two different types of addressing - PC style addresses, and ARM + * addresses. PC style accesses the PC hardware with the normal PC IO + * addresses, eg 0x3f8 for serial#1. ARM addresses are above A28 + * and are translated to the start of IO. Note that all addresses are + * not shifted left! + */ + +#define __PORT_PCIO(x) ((x) < (1<<28)) + +#define PCIO_BASE (S3C24XX_VA_ISA_WORD) +#define PCIO_BASE_b (S3C24XX_VA_ISA_BYTE) +#define PCIO_BASE_w (S3C24XX_VA_ISA_WORD) +#define PCIO_BASE_l (S3C24XX_VA_ISA_WORD) +/* + * Dynamic IO functions - let the compiler + * optimize the expressions + */ + +#define DECLARE_DYN_OUT(sz,fnsuffix,instr) \ +static inline void __out##fnsuffix (unsigned int val, unsigned int port) \ +{ \ + unsigned long temp; \ + __asm__ __volatile__( \ + "cmp %2, #(1<<28)\n\t" \ + "mov %0, %2\n\t" \ + "addcc %0, %0, %3\n\t" \ + "str" instr " %1, [%0, #0 ] @ out" #fnsuffix \ + : "=&r" (temp) \ + : "r" (val), "r" (port), "Ir" (PCIO_BASE_##fnsuffix) \ + : "cc"); \ +} + + +#define DECLARE_DYN_IN(sz,fnsuffix,instr) \ +static inline unsigned sz __in##fnsuffix (unsigned int port) \ +{ \ + unsigned long temp, value; \ + __asm__ __volatile__( \ + "cmp %2, #(1<<28)\n\t" \ + "mov %0, %2\n\t" \ + "addcc %0, %0, %3\n\t" \ + "ldr" instr " %1, [%0, #0 ] @ in" #fnsuffix \ + : "=&r" (temp), "=r" (value) \ + : "r" (port), "Ir" (PCIO_BASE_##fnsuffix) \ + : "cc"); \ + return (unsigned sz)value; \ +} + +static inline void __iomem *__ioaddr (unsigned long port) +{ + return __PORT_PCIO(port) ? (PCIO_BASE + port) : (void __iomem *)port; +} + +#define DECLARE_IO(sz,fnsuffix,instr) \ + DECLARE_DYN_IN(sz,fnsuffix,instr) \ + DECLARE_DYN_OUT(sz,fnsuffix,instr) + +DECLARE_IO(char,b,"b") +DECLARE_IO(short,w,"h") +DECLARE_IO(int,l,"") + +#undef DECLARE_IO +#undef DECLARE_DYN_IN + +/* + * Constant address IO functions + * + * These have to be macros for the 'J' constraint to work - + * +/-4096 immediate operand. + */ +#define __outbc(value,port) \ +({ \ + if (__PORT_PCIO((port))) \ + __asm__ __volatile__( \ + "strb %0, [%1, %2] @ outbc" \ + : : "r" (value), "r" (PCIO_BASE), "Jr" ((port))); \ + else \ + __asm__ __volatile__( \ + "strb %0, [%1, #0] @ outbc" \ + : : "r" (value), "r" ((port))); \ +}) + +#define __inbc(port) \ +({ \ + unsigned char result; \ + if (__PORT_PCIO((port))) \ + __asm__ __volatile__( \ + "ldrb %0, [%1, %2] @ inbc" \ + : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port))); \ + else \ + __asm__ __volatile__( \ + "ldrb %0, [%1, #0] @ inbc" \ + : "=r" (result) : "r" ((port))); \ + result; \ +}) + +#define __outwc(value,port) \ +({ \ + unsigned long v = value; \ + if (__PORT_PCIO((port))) { \ + if ((port) < 256 && (port) > -256) \ + __asm__ __volatile__( \ + "strh %0, [%1, %2] @ outwc" \ + : : "r" (v), "r" (PCIO_BASE), "Jr" ((port))); \ + else if ((port) > 0) \ + __asm__ __volatile__( \ + "strh %0, [%1, %2] @ outwc" \ + : : "r" (v), \ + "r" (PCIO_BASE + ((port) & ~0xff)), \ + "Jr" (((port) & 0xff))); \ + else \ + __asm__ __volatile__( \ + "strh %0, [%1, #0] @ outwc" \ + : : "r" (v), \ + "r" (PCIO_BASE + (port))); \ + } else \ + __asm__ __volatile__( \ + "strh %0, [%1, #0] @ outwc" \ + : : "r" (v), "r" ((port))); \ +}) + +#define __inwc(port) \ +({ \ + unsigned short result; \ + if (__PORT_PCIO((port))) { \ + if ((port) < 256 && (port) > -256 ) \ + __asm__ __volatile__( \ + "ldrh %0, [%1, %2] @ inwc" \ + : "=r" (result) \ + : "r" (PCIO_BASE), \ + "Jr" ((port))); \ + else if ((port) > 0) \ + __asm__ __volatile__( \ + "ldrh %0, [%1, %2] @ inwc" \ + : "=r" (result) \ + : "r" (PCIO_BASE + ((port) & ~0xff)), \ + "Jr" (((port) & 0xff))); \ + else \ + __asm__ __volatile__( \ + "ldrh %0, [%1, #0] @ inwc" \ + : "=r" (result) \ + : "r" (PCIO_BASE + ((port)))); \ + } else \ + __asm__ __volatile__( \ + "ldrh %0, [%1, #0] @ inwc" \ + : "=r" (result) : "r" ((port))); \ + result; \ +}) + +#define __outlc(value,port) \ +({ \ + unsigned long v = value; \ + if (__PORT_PCIO((port))) \ + __asm__ __volatile__( \ + "str %0, [%1, %2] @ outlc" \ + : : "r" (v), "r" (PCIO_BASE), "Jr" ((port))); \ + else \ + __asm__ __volatile__( \ + "str %0, [%1, #0] @ outlc" \ + : : "r" (v), "r" ((port))); \ +}) + +#define __inlc(port) \ +({ \ + unsigned long result; \ + if (__PORT_PCIO((port))) \ + __asm__ __volatile__( \ + "ldr %0, [%1, %2] @ inlc" \ + : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port))); \ + else \ + __asm__ __volatile__( \ + "ldr %0, [%1, #0] @ inlc" \ + : "=r" (result) : "r" ((port))); \ + result; \ +}) + +#define __ioaddrc(port) ((__PORT_PCIO(port) ? PCIO_BASE + (port) : (void __iomem *)(port))) + +#define inb(p) (__builtin_constant_p((p)) ? __inbc(p) : __inb(p)) +#define inw(p) (__builtin_constant_p((p)) ? __inwc(p) : __inw(p)) +#define inl(p) (__builtin_constant_p((p)) ? __inlc(p) : __inl(p)) +#define outb(v,p) (__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p)) +#define outw(v,p) (__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p)) +#define outl(v,p) (__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p)) +#define __ioaddr(p) (__builtin_constant_p((p)) ? __ioaddr(p) : __ioaddrc(p)) +/* the following macro is deprecated */ +#define ioaddr(port) __ioaddr((port)) + +#define insb(p,d,l) __raw_readsb(__ioaddr(p),d,l) +#define insw(p,d,l) __raw_readsw(__ioaddr(p),d,l) +#define insl(p,d,l) __raw_readsl(__ioaddr(p),d,l) + +#define outsb(p,d,l) __raw_writesb(__ioaddr(p),d,l) +#define outsw(p,d,l) __raw_writesw(__ioaddr(p),d,l) +#define outsl(p,d,l) __raw_writesl(__ioaddr(p),d,l) + +/* + * 1:1 mapping for ioremapped regions. + */ +#define __mem_pci(x) (x) + +#endif diff --git a/arch/arm/mach-s3c2410/include/mach/irqs.h b/arch/arm/mach-s3c2410/include/mach/irqs.h new file mode 100644 index 000000000000..950c71bf1489 --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/irqs.h @@ -0,0 +1,166 @@ +/* arch/arm/mach-s3c2410/include/mach/irqs.h + * + * Copyright (c) 2003-2005 Simtec Electronics + * Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + + +#ifndef __ASM_ARCH_IRQS_H +#define __ASM_ARCH_IRQS_H __FILE__ + +#ifndef __ASM_ARM_IRQ_H +#error "Do not include this directly, instead #include " +#endif + +/* we keep the first set of CPU IRQs out of the range of + * the ISA space, so that the PC104 has them to itself + * and we don't end up having to do horrible things to the + * standard ISA drivers.... + */ + +#define S3C2410_CPUIRQ_OFFSET (16) + +#define S3C2410_IRQ(x) ((x) + S3C2410_CPUIRQ_OFFSET) + +/* main cpu interrupts */ +#define IRQ_EINT0 S3C2410_IRQ(0) /* 16 */ +#define IRQ_EINT1 S3C2410_IRQ(1) +#define IRQ_EINT2 S3C2410_IRQ(2) +#define IRQ_EINT3 S3C2410_IRQ(3) +#define IRQ_EINT4t7 S3C2410_IRQ(4) /* 20 */ +#define IRQ_EINT8t23 S3C2410_IRQ(5) +#define IRQ_RESERVED6 S3C2410_IRQ(6) /* for s3c2410 */ +#define IRQ_CAM S3C2410_IRQ(6) /* for s3c2440,s3c2443 */ +#define IRQ_BATT_FLT S3C2410_IRQ(7) +#define IRQ_TICK S3C2410_IRQ(8) /* 24 */ +#define IRQ_WDT S3C2410_IRQ(9) /* WDT/AC97 for s3c2443 */ +#define IRQ_TIMER0 S3C2410_IRQ(10) +#define IRQ_TIMER1 S3C2410_IRQ(11) +#define IRQ_TIMER2 S3C2410_IRQ(12) +#define IRQ_TIMER3 S3C2410_IRQ(13) +#define IRQ_TIMER4 S3C2410_IRQ(14) +#define IRQ_UART2 S3C2410_IRQ(15) +#define IRQ_LCD S3C2410_IRQ(16) /* 32 */ +#define IRQ_DMA0 S3C2410_IRQ(17) /* IRQ_DMA for s3c2443 */ +#define IRQ_DMA1 S3C2410_IRQ(18) +#define IRQ_DMA2 S3C2410_IRQ(19) +#define IRQ_DMA3 S3C2410_IRQ(20) +#define IRQ_SDI S3C2410_IRQ(21) +#define IRQ_SPI0 S3C2410_IRQ(22) +#define IRQ_UART1 S3C2410_IRQ(23) +#define IRQ_RESERVED24 S3C2410_IRQ(24) /* 40 */ +#define IRQ_NFCON S3C2410_IRQ(24) /* for s3c2440 */ +#define IRQ_USBD S3C2410_IRQ(25) +#define IRQ_USBH S3C2410_IRQ(26) +#define IRQ_IIC S3C2410_IRQ(27) +#define IRQ_UART0 S3C2410_IRQ(28) /* 44 */ +#define IRQ_SPI1 S3C2410_IRQ(29) +#define IRQ_RTC S3C2410_IRQ(30) +#define IRQ_ADCPARENT S3C2410_IRQ(31) + +/* interrupts generated from the external interrupts sources */ +#define IRQ_EINT4 S3C2410_IRQ(32) /* 48 */ +#define IRQ_EINT5 S3C2410_IRQ(33) +#define IRQ_EINT6 S3C2410_IRQ(34) +#define IRQ_EINT7 S3C2410_IRQ(35) +#define IRQ_EINT8 S3C2410_IRQ(36) +#define IRQ_EINT9 S3C2410_IRQ(37) +#define IRQ_EINT10 S3C2410_IRQ(38) +#define IRQ_EINT11 S3C2410_IRQ(39) +#define IRQ_EINT12 S3C2410_IRQ(40) +#define IRQ_EINT13 S3C2410_IRQ(41) +#define IRQ_EINT14 S3C2410_IRQ(42) +#define IRQ_EINT15 S3C2410_IRQ(43) +#define IRQ_EINT16 S3C2410_IRQ(44) +#define IRQ_EINT17 S3C2410_IRQ(45) +#define IRQ_EINT18 S3C2410_IRQ(46) +#define IRQ_EINT19 S3C2410_IRQ(47) +#define IRQ_EINT20 S3C2410_IRQ(48) /* 64 */ +#define IRQ_EINT21 S3C2410_IRQ(49) +#define IRQ_EINT22 S3C2410_IRQ(50) +#define IRQ_EINT23 S3C2410_IRQ(51) + + +#define IRQ_EINT(x) (((x) >= 4) ? (IRQ_EINT4 + (x) - 4) : (IRQ_EINT0 + (x))) + +#define IRQ_LCD_FIFO S3C2410_IRQ(52) +#define IRQ_LCD_FRAME S3C2410_IRQ(53) + +/* IRQs for the interal UARTs, and ADC + * these need to be ordered in number of appearance in the + * SUBSRC mask register +*/ + +#define S3C2410_IRQSUB(x) S3C2410_IRQ((x)+54) + +#define IRQ_S3CUART_RX0 S3C2410_IRQSUB(0) /* 70 */ +#define IRQ_S3CUART_TX0 S3C2410_IRQSUB(1) +#define IRQ_S3CUART_ERR0 S3C2410_IRQSUB(2) + +#define IRQ_S3CUART_RX1 S3C2410_IRQSUB(3) /* 73 */ +#define IRQ_S3CUART_TX1 S3C2410_IRQSUB(4) +#define IRQ_S3CUART_ERR1 S3C2410_IRQSUB(5) + +#define IRQ_S3CUART_RX2 S3C2410_IRQSUB(6) /* 76 */ +#define IRQ_S3CUART_TX2 S3C2410_IRQSUB(7) +#define IRQ_S3CUART_ERR2 S3C2410_IRQSUB(8) + +#define IRQ_TC S3C2410_IRQSUB(9) +#define IRQ_ADC S3C2410_IRQSUB(10) + +/* extra irqs for s3c2412 */ + +#define IRQ_S3C2412_CFSDI S3C2410_IRQ(21) + +#define IRQ_S3C2412_SDI S3C2410_IRQSUB(13) +#define IRQ_S3C2412_CF S3C2410_IRQSUB(14) + +/* extra irqs for s3c2440 */ + +#define IRQ_S3C2440_CAM_C S3C2410_IRQSUB(11) /* S3C2443 too */ +#define IRQ_S3C2440_CAM_P S3C2410_IRQSUB(12) /* S3C2443 too */ +#define IRQ_S3C2440_WDT S3C2410_IRQSUB(13) +#define IRQ_S3C2440_AC97 S3C2410_IRQSUB(14) + +/* irqs for s3c2443 */ + +#define IRQ_S3C2443_DMA S3C2410_IRQ(17) /* IRQ_DMA1 */ +#define IRQ_S3C2443_UART3 S3C2410_IRQ(18) /* IRQ_DMA2 */ +#define IRQ_S3C2443_CFCON S3C2410_IRQ(19) /* IRQ_DMA3 */ +#define IRQ_S3C2443_HSMMC S3C2410_IRQ(20) /* IRQ_SDI */ +#define IRQ_S3C2443_NAND S3C2410_IRQ(24) /* reserved */ + +#define IRQ_S3C2443_LCD1 S3C2410_IRQSUB(14) +#define IRQ_S3C2443_LCD2 S3C2410_IRQSUB(15) +#define IRQ_S3C2443_LCD3 S3C2410_IRQSUB(16) +#define IRQ_S3C2443_LCD4 S3C2410_IRQSUB(17) + +#define IRQ_S3C2443_DMA0 S3C2410_IRQSUB(18) +#define IRQ_S3C2443_DMA1 S3C2410_IRQSUB(19) +#define IRQ_S3C2443_DMA2 S3C2410_IRQSUB(20) +#define IRQ_S3C2443_DMA3 S3C2410_IRQSUB(21) +#define IRQ_S3C2443_DMA4 S3C2410_IRQSUB(22) +#define IRQ_S3C2443_DMA5 S3C2410_IRQSUB(23) + +/* UART3 */ +#define IRQ_S3C2443_RX3 S3C2410_IRQSUB(24) +#define IRQ_S3C2443_TX3 S3C2410_IRQSUB(25) +#define IRQ_S3C2443_ERR3 S3C2410_IRQSUB(26) + +#define IRQ_S3C2443_WDT S3C2410_IRQSUB(27) +#define IRQ_S3C2443_AC97 S3C2410_IRQSUB(28) + +#ifdef CONFIG_CPU_S3C2443 +#define NR_IRQS (IRQ_S3C2443_AC97+1) +#else +#define NR_IRQS (IRQ_S3C2440_AC97+1) +#endif + +/* Our FIQs are routable from IRQ_EINT0 to IRQ_ADCPARENT */ +#define FIQ_START IRQ_EINT0 + +#endif /* __ASM_ARCH_IRQ_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/leds-gpio.h b/arch/arm/mach-s3c2410/include/mach/leds-gpio.h new file mode 100644 index 000000000000..d8a7672519b6 --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/leds-gpio.h @@ -0,0 +1,28 @@ +/* arch/arm/mach-s3c2410/include/mach/leds-gpio.h + * + * Copyright (c) 2006 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * S3C24XX - LEDs GPIO connector + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_LEDSGPIO_H +#define __ASM_ARCH_LEDSGPIO_H "leds-gpio.h" + +#define S3C24XX_LEDF_ACTLOW (1<<0) /* LED is on when GPIO low */ +#define S3C24XX_LEDF_TRISTATE (1<<1) /* tristate to turn off */ + +struct s3c24xx_led_platdata { + unsigned int gpio; + unsigned int flags; + + char *name; + char *def_trigger; +}; + +#endif /* __ASM_ARCH_LEDSGPIO_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h new file mode 100644 index 000000000000..64bf7e94a5bf --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/map.h @@ -0,0 +1,178 @@ +/* arch/arm/mach-s3c2410/include/mach/map.h + * + * Copyright (c) 2003 Simtec Electronics + * Ben Dooks + * + * S3C2410 - Memory map definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_MAP_H +#define __ASM_ARCH_MAP_H + +#include + +#define S3C2410_ADDR(x) S3C_ADDR(x) + +/* interrupt controller is the first thing we put in, to make + * the assembly code for the irq detection easier + */ +#define S3C24XX_VA_IRQ S3C_VA_IRQ +#define S3C2410_PA_IRQ (0x4A000000) +#define S3C24XX_SZ_IRQ SZ_1M + +/* memory controller registers */ +#define S3C24XX_VA_MEMCTRL S3C_VA_MEM +#define S3C2410_PA_MEMCTRL (0x48000000) +#define S3C24XX_SZ_MEMCTRL SZ_1M + +/* USB host controller */ +#define S3C2410_PA_USBHOST (0x49000000) +#define S3C24XX_SZ_USBHOST SZ_1M + +/* DMA controller */ +#define S3C2410_PA_DMA (0x4B000000) +#define S3C24XX_SZ_DMA SZ_1M + +/* Clock and Power management */ +#define S3C24XX_VA_CLKPWR S3C_VA_SYS +#define S3C2410_PA_CLKPWR (0x4C000000) +#define S3C24XX_SZ_CLKPWR SZ_1M + +/* LCD controller */ +#define S3C2410_PA_LCD (0x4D000000) +#define S3C24XX_SZ_LCD SZ_1M + +/* NAND flash controller */ +#define S3C2410_PA_NAND (0x4E000000) +#define S3C24XX_SZ_NAND SZ_1M + +/* UARTs */ +#define S3C24XX_VA_UART S3C_VA_UART +#define S3C2410_PA_UART (0x50000000) +#define S3C24XX_SZ_UART SZ_1M + +/* Timers */ +#define S3C24XX_VA_TIMER S3C_VA_TIMER +#define S3C2410_PA_TIMER (0x51000000) +#define S3C24XX_SZ_TIMER SZ_1M + +/* USB Device port */ +#define S3C2410_PA_USBDEV (0x52000000) +#define S3C24XX_SZ_USBDEV SZ_1M + +/* Watchdog */ +#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG +#define S3C2410_PA_WATCHDOG (0x53000000) +#define S3C24XX_SZ_WATCHDOG SZ_1M + +/* IIC hardware controller */ +#define S3C2410_PA_IIC (0x54000000) +#define S3C24XX_SZ_IIC SZ_1M + +/* IIS controller */ +#define S3C2410_PA_IIS (0x55000000) +#define S3C24XX_SZ_IIS SZ_1M + +/* GPIO ports */ + +/* the calculation for the VA of this must ensure that + * it is the same distance apart from the UART in the + * phsyical address space, as the initial mapping for the IO + * is done as a 1:1 maping. This puts it (currently) at + * 0xFA800000, which is not in the way of any current mapping + * by the base system. +*/ + +#define S3C2410_PA_GPIO (0x56000000) +#define S3C24XX_VA_GPIO ((S3C2410_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART) +#define S3C24XX_SZ_GPIO SZ_1M + +/* RTC */ +#define S3C2410_PA_RTC (0x57000000) +#define S3C24XX_SZ_RTC SZ_1M + +/* ADC */ +#define S3C2410_PA_ADC (0x58000000) +#define S3C24XX_SZ_ADC SZ_1M + +/* SPI */ +#define S3C2410_PA_SPI (0x59000000) +#define S3C24XX_SZ_SPI SZ_1M + +/* SDI */ +#define S3C2410_PA_SDI (0x5A000000) +#define S3C24XX_SZ_SDI SZ_1M + +/* CAMIF */ +#define S3C2440_PA_CAMIF (0x4F000000) +#define S3C2440_SZ_CAMIF SZ_1M + +/* AC97 */ + +#define S3C2440_PA_AC97 (0x5B000000) +#define S3C2440_SZ_AC97 SZ_1M + +/* S3C2443 High-speed SD/MMC */ +#define S3C2443_PA_HSMMC (0x4A800000) +#define S3C2443_SZ_HSMMC (256) + +/* ISA style IO, for each machine to sort out mappings for, if it + * implements it. We reserve two 16M regions for ISA. + */ + +#define S3C24XX_VA_ISA_WORD S3C2410_ADDR(0x02000000) +#define S3C24XX_VA_ISA_BYTE S3C2410_ADDR(0x03000000) + +/* physical addresses of all the chip-select areas */ + +#define S3C2410_CS0 (0x00000000) +#define S3C2410_CS1 (0x08000000) +#define S3C2410_CS2 (0x10000000) +#define S3C2410_CS3 (0x18000000) +#define S3C2410_CS4 (0x20000000) +#define S3C2410_CS5 (0x28000000) +#define S3C2410_CS6 (0x30000000) +#define S3C2410_CS7 (0x38000000) + +#define S3C2410_SDRAM_PA (S3C2410_CS6) + +/* Use a single interface for common resources between S3C24XX cpus */ + +#define S3C24XX_PA_IRQ S3C2410_PA_IRQ +#define S3C24XX_PA_MEMCTRL S3C2410_PA_MEMCTRL +#define S3C24XX_PA_USBHOST S3C2410_PA_USBHOST +#define S3C24XX_PA_DMA S3C2410_PA_DMA +#define S3C24XX_PA_CLKPWR S3C2410_PA_CLKPWR +#define S3C24XX_PA_LCD S3C2410_PA_LCD +#define S3C24XX_PA_UART S3C2410_PA_UART +#define S3C24XX_PA_TIMER S3C2410_PA_TIMER +#define S3C24XX_PA_USBDEV S3C2410_PA_USBDEV +#define S3C24XX_PA_WATCHDOG S3C2410_PA_WATCHDOG +#define S3C24XX_PA_IIC S3C2410_PA_IIC +#define S3C24XX_PA_IIS S3C2410_PA_IIS +#define S3C24XX_PA_GPIO S3C2410_PA_GPIO +#define S3C24XX_PA_RTC S3C2410_PA_RTC +#define S3C24XX_PA_ADC S3C2410_PA_ADC +#define S3C24XX_PA_SPI S3C2410_PA_SPI + +/* deal with the registers that move under the 2412/2413 */ + +#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413) +#ifndef __ASSEMBLY__ +extern void __iomem *s3c24xx_va_gpio2; +#endif +#ifdef CONFIG_CPU_S3C2412_ONLY +#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10) +#else +#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2 +#endif +#else +#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO +#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO +#endif + +#endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/memory.h b/arch/arm/mach-s3c2410/include/mach/memory.h new file mode 100644 index 000000000000..93782628a786 --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/memory.h @@ -0,0 +1,19 @@ +/* arch/arm/mach-s3c2410/include/mach/memory.h + * from arch/arm/mach-rpc/include/mach/memory.h + * + * Copyright (C) 1996,1997,1998 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +#define PHYS_OFFSET UL(0x30000000) + +#define __virt_to_bus(x) __virt_to_phys(x) +#define __bus_to_virt(x) __phys_to_virt(x) + +#endif diff --git a/arch/arm/mach-s3c2410/include/mach/osiris-cpld.h b/arch/arm/mach-s3c2410/include/mach/osiris-cpld.h new file mode 100644 index 000000000000..e9e36b0abbac --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/osiris-cpld.h @@ -0,0 +1,30 @@ +/* arch/arm/mach-s3c2410/include/mach/osiris-cpld.h + * + * Copyright 2005 Simtec Electronics + * http://www.simtec.co.uk/products/ + * Ben Dooks + * + * OSIRIS - CPLD control constants + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_OSIRISCPLD_H +#define __ASM_ARCH_OSIRISCPLD_H + +/* CTRL0 - NAND WP control */ + +#define OSIRIS_CTRL0_NANDSEL (0x3) +#define OSIRIS_CTRL0_BOOT_INT (1<<3) +#define OSIRIS_CTRL0_PCMCIA (1<<4) +#define OSIRIS_CTRL0_FIX8 (1<<5) +#define OSIRIS_CTRL0_PCMCIA_nWAIT (1<<6) +#define OSIRIS_CTRL0_PCMCIA_nIOIS16 (1<<7) + +#define OSIRIS_CTRL1_FIX8 (1<<0) + +#define OSIRIS_ID_REVMASK (0x7) + +#endif /* __ASM_ARCH_OSIRISCPLD_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/osiris-map.h b/arch/arm/mach-s3c2410/include/mach/osiris-map.h new file mode 100644 index 000000000000..639eff523d4e --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/osiris-map.h @@ -0,0 +1,42 @@ +/* arch/arm/mach-s3c2410/include/mach/osiris-map.h + * + * (c) 2005 Simtec Electronics + * http://www.simtec.co.uk/products/ + * Ben Dooks + * + * OSIRIS - Memory map definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* needs arch/map.h including with this */ + +#ifndef __ASM_ARCH_OSIRISMAP_H +#define __ASM_ARCH_OSIRISMAP_H + +/* start peripherals off after the S3C2410 */ + +#define OSIRIS_IOADDR(x) (S3C2410_ADDR((x) + 0x04000000)) + +#define OSIRIS_PA_CPLD (S3C2410_CS1 | (1<<26)) + +/* we put the CPLD registers next, to get them out of the way */ + +#define OSIRIS_VA_CTRL0 OSIRIS_IOADDR(0x00000000) +#define OSIRIS_PA_CTRL0 (OSIRIS_PA_CPLD) + +#define OSIRIS_VA_CTRL1 OSIRIS_IOADDR(0x00100000) +#define OSIRIS_PA_CTRL1 (OSIRIS_PA_CPLD + (1<<23)) + +#define OSIRIS_VA_CTRL2 OSIRIS_IOADDR(0x00200000) +#define OSIRIS_PA_CTRL2 (OSIRIS_PA_CPLD + (2<<23)) + +#define OSIRIS_VA_CTRL3 OSIRIS_IOADDR(0x00300000) +#define OSIRIS_PA_CTRL3 (OSIRIS_PA_CPLD + (2<<23)) + +#define OSIRIS_VA_IDREG OSIRIS_IOADDR(0x00700000) +#define OSIRIS_PA_IDREG (OSIRIS_PA_CPLD + (7<<23)) + +#endif /* __ASM_ARCH_OSIRISMAP_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/otom-map.h b/arch/arm/mach-s3c2410/include/mach/otom-map.h new file mode 100644 index 000000000000..f9277a52c145 --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/otom-map.h @@ -0,0 +1,30 @@ +/* arch/arm/mach-s3c2410/include/mach/otom-map.h + * + * (c) 2005 Guillaume GOURAT / NexVision + * guillaume.gourat@nexvision.fr + * + * NexVision OTOM board memory map definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* needs arch/map.h including with this */ + +/* ok, we've used up to 0x01300000, now we need to find space for the + * peripherals that live in the nGCS[x] areas, which are quite numerous + * in their space. + */ + +#ifndef __ASM_ARCH_OTOMMAP_H +#define __ASM_ARCH_OTOMMAP_H + +#define OTOM_PA_CS8900A_BASE (S3C2410_CS3 + 0x01000000) /* nGCS3 +0x01000000 */ +#define OTOM_VA_CS8900A_BASE S3C2410_ADDR(0x04000000) /* 0xF4000000 */ + +/* physical offset addresses for the peripherals */ + +#define OTOM_PA_FLASH0_BASE (S3C2410_CS0) /* Bank 0 */ + +#endif /* __ASM_ARCH_OTOMMAP_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/regs-clock.h b/arch/arm/mach-s3c2410/include/mach/regs-clock.h new file mode 100644 index 000000000000..d583688458a4 --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/regs-clock.h @@ -0,0 +1,197 @@ +/* arch/arm/mach-s3c2410/include/mach/regs-clock.h + * + * Copyright (c) 2003,2004,2005,2006 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2410 clock register definitions +*/ + +#ifndef __ASM_ARM_REGS_CLOCK +#define __ASM_ARM_REGS_CLOCK "$Id: clock.h,v 1.4 2003/04/30 14:50:51 ben Exp $" + +#define S3C2410_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR) + +#define S3C2410_PLLVAL(_m,_p,_s) ((_m) << 12 | ((_p) << 4) | ((_s))) + +#define S3C2410_LOCKTIME S3C2410_CLKREG(0x00) +#define S3C2410_MPLLCON S3C2410_CLKREG(0x04) +#define S3C2410_UPLLCON S3C2410_CLKREG(0x08) +#define S3C2410_CLKCON S3C2410_CLKREG(0x0C) +#define S3C2410_CLKSLOW S3C2410_CLKREG(0x10) +#define S3C2410_CLKDIVN S3C2410_CLKREG(0x14) + +#define S3C2410_CLKCON_IDLE (1<<2) +#define S3C2410_CLKCON_POWER (1<<3) +#define S3C2410_CLKCON_NAND (1<<4) +#define S3C2410_CLKCON_LCDC (1<<5) +#define S3C2410_CLKCON_USBH (1<<6) +#define S3C2410_CLKCON_USBD (1<<7) +#define S3C2410_CLKCON_PWMT (1<<8) +#define S3C2410_CLKCON_SDI (1<<9) +#define S3C2410_CLKCON_UART0 (1<<10) +#define S3C2410_CLKCON_UART1 (1<<11) +#define S3C2410_CLKCON_UART2 (1<<12) +#define S3C2410_CLKCON_GPIO (1<<13) +#define S3C2410_CLKCON_RTC (1<<14) +#define S3C2410_CLKCON_ADC (1<<15) +#define S3C2410_CLKCON_IIC (1<<16) +#define S3C2410_CLKCON_IIS (1<<17) +#define S3C2410_CLKCON_SPI (1<<18) + +#define S3C2410_PLLCON_MDIVSHIFT 12 +#define S3C2410_PLLCON_PDIVSHIFT 4 +#define S3C2410_PLLCON_SDIVSHIFT 0 +#define S3C2410_PLLCON_MDIVMASK ((1<<(1+(19-12)))-1) +#define S3C2410_PLLCON_PDIVMASK ((1<<5)-1) +#define S3C2410_PLLCON_SDIVMASK 3 + +/* DCLKCON register addresses in gpio.h */ + +#define S3C2410_DCLKCON_DCLK0EN (1<<0) +#define S3C2410_DCLKCON_DCLK0_PCLK (0<<1) +#define S3C2410_DCLKCON_DCLK0_UCLK (1<<1) +#define S3C2410_DCLKCON_DCLK0_DIV(x) (((x) - 1 )<<4) +#define S3C2410_DCLKCON_DCLK0_CMP(x) (((x) - 1 )<<8) +#define S3C2410_DCLKCON_DCLK0_DIV_MASK ((0xf)<<4) +#define S3C2410_DCLKCON_DCLK0_CMP_MASK ((0xf)<<8) + +#define S3C2410_DCLKCON_DCLK1EN (1<<16) +#define S3C2410_DCLKCON_DCLK1_PCLK (0<<17) +#define S3C2410_DCLKCON_DCLK1_UCLK (1<<17) +#define S3C2410_DCLKCON_DCLK1_DIV(x) (((x) - 1) <<20) +#define S3C2410_DCLKCON_DCLK1_CMP(x) (((x) - 1) <<24) +#define S3C2410_DCLKCON_DCLK1_DIV_MASK ((0xf) <<20) +#define S3C2410_DCLKCON_DCLK1_CMP_MASK ((0xf) <<24) + +#define S3C2410_CLKDIVN_PDIVN (1<<0) +#define S3C2410_CLKDIVN_HDIVN (1<<1) + +#define S3C2410_CLKSLOW_UCLK_OFF (1<<7) +#define S3C2410_CLKSLOW_MPLL_OFF (1<<5) +#define S3C2410_CLKSLOW_SLOW (1<<4) +#define S3C2410_CLKSLOW_SLOWVAL(x) (x) +#define S3C2410_CLKSLOW_GET_SLOWVAL(x) ((x) & 7) + +#ifndef __ASSEMBLY__ + +#include + +static inline unsigned int +s3c2410_get_pll(unsigned int pllval, unsigned int baseclk) +{ + unsigned int mdiv, pdiv, sdiv; + uint64_t fvco; + + mdiv = pllval >> S3C2410_PLLCON_MDIVSHIFT; + pdiv = pllval >> S3C2410_PLLCON_PDIVSHIFT; + sdiv = pllval >> S3C2410_PLLCON_SDIVSHIFT; + + mdiv &= S3C2410_PLLCON_MDIVMASK; + pdiv &= S3C2410_PLLCON_PDIVMASK; + sdiv &= S3C2410_PLLCON_SDIVMASK; + + fvco = (uint64_t)baseclk * (mdiv + 8); + do_div(fvco, (pdiv + 2) << sdiv); + + return (unsigned int)fvco; +} + +#endif /* __ASSEMBLY__ */ + +#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442) + +/* extra registers */ +#define S3C2440_CAMDIVN S3C2410_CLKREG(0x18) + +#define S3C2440_CLKCON_CAMERA (1<<19) +#define S3C2440_CLKCON_AC97 (1<<20) + +#define S3C2440_CLKDIVN_PDIVN (1<<0) +#define S3C2440_CLKDIVN_HDIVN_MASK (3<<1) +#define S3C2440_CLKDIVN_HDIVN_1 (0<<1) +#define S3C2440_CLKDIVN_HDIVN_2 (1<<1) +#define S3C2440_CLKDIVN_HDIVN_4_8 (2<<1) +#define S3C2440_CLKDIVN_HDIVN_3_6 (3<<1) +#define S3C2440_CLKDIVN_UCLK (1<<3) + +#define S3C2440_CAMDIVN_CAMCLK_MASK (0xf<<0) +#define S3C2440_CAMDIVN_CAMCLK_SEL (1<<4) +#define S3C2440_CAMDIVN_HCLK3_HALF (1<<8) +#define S3C2440_CAMDIVN_HCLK4_HALF (1<<9) +#define S3C2440_CAMDIVN_DVSEN (1<<12) + +#define S3C2442_CAMDIVN_CAMCLK_DIV3 (1<<5) + +#endif /* CONFIG_CPU_S3C2440 or CONFIG_CPU_S3C2442 */ + +#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413) + +#define S3C2412_OSCSET S3C2410_CLKREG(0x18) +#define S3C2412_CLKSRC S3C2410_CLKREG(0x1C) + +#define S3C2412_PLLCON_OFF (1<<20) + +#define S3C2412_CLKDIVN_PDIVN (1<<2) +#define S3C2412_CLKDIVN_HDIVN_MASK (3<<0) +#define S3C2412_CLKDIVN_ARMDIVN (1<<3) +#define S3C2412_CLKDIVN_DVSEN (1<<4) +#define S3C2412_CLKDIVN_HALFHCLK (1<<5) +#define S3C2412_CLKDIVN_USB48DIV (1<<6) +#define S3C2412_CLKDIVN_UARTDIV_MASK (15<<8) +#define S3C2412_CLKDIVN_UARTDIV_SHIFT (8) +#define S3C2412_CLKDIVN_I2SDIV_MASK (15<<12) +#define S3C2412_CLKDIVN_I2SDIV_SHIFT (12) +#define S3C2412_CLKDIVN_CAMDIV_MASK (15<<16) +#define S3C2412_CLKDIVN_CAMDIV_SHIFT (16) + +#define S3C2412_CLKCON_WDT (1<<28) +#define S3C2412_CLKCON_SPI (1<<27) +#define S3C2412_CLKCON_IIS (1<<26) +#define S3C2412_CLKCON_IIC (1<<25) +#define S3C2412_CLKCON_ADC (1<<24) +#define S3C2412_CLKCON_RTC (1<<23) +#define S3C2412_CLKCON_GPIO (1<<22) +#define S3C2412_CLKCON_UART2 (1<<21) +#define S3C2412_CLKCON_UART1 (1<<20) +#define S3C2412_CLKCON_UART0 (1<<19) +#define S3C2412_CLKCON_SDI (1<<18) +#define S3C2412_CLKCON_PWMT (1<<17) +#define S3C2412_CLKCON_USBD (1<<16) +#define S3C2412_CLKCON_CAMCLK (1<<15) +#define S3C2412_CLKCON_UARTCLK (1<<14) +/* missing 13 */ +#define S3C2412_CLKCON_USB_HOST48 (1<<12) +#define S3C2412_CLKCON_USB_DEV48 (1<<11) +#define S3C2412_CLKCON_HCLKdiv2 (1<<10) +#define S3C2412_CLKCON_HCLKx2 (1<<9) +#define S3C2412_CLKCON_SDRAM (1<<8) +/* missing 7 */ +#define S3C2412_CLKCON_USBH S3C2410_CLKCON_USBH +#define S3C2412_CLKCON_LCDC S3C2410_CLKCON_LCDC +#define S3C2412_CLKCON_NAND S3C2410_CLKCON_NAND +#define S3C2412_CLKCON_DMA3 (1<<3) +#define S3C2412_CLKCON_DMA2 (1<<2) +#define S3C2412_CLKCON_DMA1 (1<<1) +#define S3C2412_CLKCON_DMA0 (1<<0) + +/* clock sourec controls */ + +#define S3C2412_CLKSRC_EXTCLKDIV_MASK (7 << 0) +#define S3C2412_CLKSRC_EXTCLKDIV_SHIFT (0) +#define S3C2412_CLKSRC_MDIVCLK_EXTCLKDIV (1<<3) +#define S3C2412_CLKSRC_MSYSCLK_MPLL (1<<4) +#define S3C2412_CLKSRC_USYSCLK_UPLL (1<<5) +#define S3C2412_CLKSRC_UARTCLK_MPLL (1<<8) +#define S3C2412_CLKSRC_I2SCLK_MPLL (1<<9) +#define S3C2412_CLKSRC_USBCLK_HCLK (1<<10) +#define S3C2412_CLKSRC_CAMCLK_HCLK (1<<11) +#define S3C2412_CLKSRC_UREFCLK_EXTCLK (1<<12) +#define S3C2412_CLKSRC_EREFCLK_EXTCLK (1<<14) + +#endif /* CONFIG_CPU_S3C2412 | CONFIG_CPU_S3C2413 */ + +#endif /* __ASM_ARM_REGS_CLOCK */ diff --git a/arch/arm/mach-s3c2410/include/mach/regs-dsc.h b/arch/arm/mach-s3c2410/include/mach/regs-dsc.h new file mode 100644 index 000000000000..3c3853cd3cf7 --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/regs-dsc.h @@ -0,0 +1,184 @@ +/* arch/arm/mach-s3c2410/include/mach/regs-dsc.h + * + * Copyright (c) 2004 Simtec Electronics + * http://www.simtec.co.uk/products/SWLINUX/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2440/S3C2412 Signal Drive Strength Control +*/ + + +#ifndef __ASM_ARCH_REGS_DSC_H +#define __ASM_ARCH_REGS_DSC_H "2440-dsc" + +#if defined(CONFIG_CPU_S3C2412) +#define S3C2412_DSC0 S3C2410_GPIOREG(0xdc) +#define S3C2412_DSC1 S3C2410_GPIOREG(0xe0) +#endif + +#if defined(CONFIG_CPU_S3C244X) + +#define S3C2440_DSC0 S3C2410_GPIOREG(0xc4) +#define S3C2440_DSC1 S3C2410_GPIOREG(0xc8) + +#define S3C2440_SELECT_DSC0 (0) +#define S3C2440_SELECT_DSC1 (1<<31) + +#define S3C2440_DSC_GETSHIFT(x) ((x) & 31) + +#define S3C2440_DSC0_DISABLE (1<<31) + +#define S3C2440_DSC0_ADDR (S3C2440_SELECT_DSC0 | 8) +#define S3C2440_DSC0_ADDR_12mA (0<<8) +#define S3C2440_DSC0_ADDR_10mA (1<<8) +#define S3C2440_DSC0_ADDR_8mA (2<<8) +#define S3C2440_DSC0_ADDR_6mA (3<<8) +#define S3C2440_DSC0_ADDR_MASK (3<<8) + +/* D24..D31 */ +#define S3C2440_DSC0_DATA3 (S3C2440_SELECT_DSC0 | 6) +#define S3C2440_DSC0_DATA3_12mA (0<<6) +#define S3C2440_DSC0_DATA3_10mA (1<<6) +#define S3C2440_DSC0_DATA3_8mA (2<<6) +#define S3C2440_DSC0_DATA3_6mA (3<<6) +#define S3C2440_DSC0_DATA3_MASK (3<<6) + +/* D16..D23 */ +#define S3C2440_DSC0_DATA2 (S3C2440_SELECT_DSC0 | 4) +#define S3C2440_DSC0_DATA2_12mA (0<<4) +#define S3C2440_DSC0_DATA2_10mA (1<<4) +#define S3C2440_DSC0_DATA2_8mA (2<<4) +#define S3C2440_DSC0_DATA2_6mA (3<<4) +#define S3C2440_DSC0_DATA2_MASK (3<<4) + +/* D8..D15 */ +#define S3C2440_DSC0_DATA1 (S3C2440_SELECT_DSC0 | 2) +#define S3C2440_DSC0_DATA1_12mA (0<<2) +#define S3C2440_DSC0_DATA1_10mA (1<<2) +#define S3C2440_DSC0_DATA1_8mA (2<<2) +#define S3C2440_DSC0_DATA1_6mA (3<<2) +#define S3C2440_DSC0_DATA1_MASK (3<<2) + +/* D0..D7 */ +#define S3C2440_DSC0_DATA0 (S3C2440_SELECT_DSC0 | 0) +#define S3C2440_DSC0_DATA0_12mA (0<<0) +#define S3C2440_DSC0_DATA0_10mA (1<<0) +#define S3C2440_DSC0_DATA0_8mA (2<<0) +#define S3C2440_DSC0_DATA0_6mA (3<<0) +#define S3C2440_DSC0_DATA0_MASK (3<<0) + +#define S3C2440_DSC1_SCK1 (S3C2440_SELECT_DSC1 | 28) +#define S3C2440_DSC1_SCK1_12mA (0<<28) +#define S3C2440_DSC1_SCK1_10mA (1<<28) +#define S3C2440_DSC1_SCK1_8mA (2<<28) +#define S3C2440_DSC1_SCK1_6mA (3<<28) +#define S3C2440_DSC1_SCK1_MASK (3<<28) + +#define S3C2440_DSC1_SCK0 (S3C2440_SELECT_DSC1 | 26) +#define S3C2440_DSC1_SCK0_12mA (0<<26) +#define S3C2440_DSC1_SCK0_10mA (1<<26) +#define S3C2440_DSC1_SCK0_8mA (2<<26) +#define S3C2440_DSC1_SCK0_6mA (3<<26) +#define S3C2440_DSC1_SCK0_MASK (3<<26) + +#define S3C2440_DSC1_SCKE (S3C2440_SELECT_DSC1 | 24) +#define S3C2440_DSC1_SCKE_10mA (0<<24) +#define S3C2440_DSC1_SCKE_8mA (1<<24) +#define S3C2440_DSC1_SCKE_6mA (2<<24) +#define S3C2440_DSC1_SCKE_4mA (3<<24) +#define S3C2440_DSC1_SCKE_MASK (3<<24) + +/* SDRAM nRAS/nCAS */ +#define S3C2440_DSC1_SDR (S3C2440_SELECT_DSC1 | 22) +#define S3C2440_DSC1_SDR_10mA (0<<22) +#define S3C2440_DSC1_SDR_8mA (1<<22) +#define S3C2440_DSC1_SDR_6mA (2<<22) +#define S3C2440_DSC1_SDR_4mA (3<<22) +#define S3C2440_DSC1_SDR_MASK (3<<22) + +/* NAND Flash Controller */ +#define S3C2440_DSC1_NFC (S3C2440_SELECT_DSC1 | 20) +#define S3C2440_DSC1_NFC_10mA (0<<20) +#define S3C2440_DSC1_NFC_8mA (1<<20) +#define S3C2440_DSC1_NFC_6mA (2<<20) +#define S3C2440_DSC1_NFC_4mA (3<<20) +#define S3C2440_DSC1_NFC_MASK (3<<20) + +/* nBE[0..3] */ +#define S3C2440_DSC1_nBE (S3C2440_SELECT_DSC1 | 18) +#define S3C2440_DSC1_nBE_10mA (0<<18) +#define S3C2440_DSC1_nBE_8mA (1<<18) +#define S3C2440_DSC1_nBE_6mA (2<<18) +#define S3C2440_DSC1_nBE_4mA (3<<18) +#define S3C2440_DSC1_nBE_MASK (3<<18) + +#define S3C2440_DSC1_WOE (S3C2440_SELECT_DSC1 | 16) +#define S3C2440_DSC1_WOE_10mA (0<<16) +#define S3C2440_DSC1_WOE_8mA (1<<16) +#define S3C2440_DSC1_WOE_6mA (2<<16) +#define S3C2440_DSC1_WOE_4mA (3<<16) +#define S3C2440_DSC1_WOE_MASK (3<<16) + +#define S3C2440_DSC1_CS7 (S3C2440_SELECT_DSC1 | 14) +#define S3C2440_DSC1_CS7_10mA (0<<14) +#define S3C2440_DSC1_CS7_8mA (1<<14) +#define S3C2440_DSC1_CS7_6mA (2<<14) +#define S3C2440_DSC1_CS7_4mA (3<<14) +#define S3C2440_DSC1_CS7_MASK (3<<14) + +#define S3C2440_DSC1_CS6 (S3C2440_SELECT_DSC1 | 12) +#define S3C2440_DSC1_CS6_10mA (0<<12) +#define S3C2440_DSC1_CS6_8mA (1<<12) +#define S3C2440_DSC1_CS6_6mA (2<<12) +#define S3C2440_DSC1_CS6_4mA (3<<12) +#define S3C2440_DSC1_CS6_MASK (3<<12) + +#define S3C2440_DSC1_CS5 (S3C2440_SELECT_DSC1 | 10) +#define S3C2440_DSC1_CS5_10mA (0<<10) +#define S3C2440_DSC1_CS5_8mA (1<<10) +#define S3C2440_DSC1_CS5_6mA (2<<10) +#define S3C2440_DSC1_CS5_4mA (3<<10) +#define S3C2440_DSC1_CS5_MASK (3<<10) + +#define S3C2440_DSC1_CS4 (S3C2440_SELECT_DSC1 | 8) +#define S3C2440_DSC1_CS4_10mA (0<<8) +#define S3C2440_DSC1_CS4_8mA (1<<8) +#define S3C2440_DSC1_CS4_6mA (2<<8) +#define S3C2440_DSC1_CS4_4mA (3<<8) +#define S3C2440_DSC1_CS4_MASK (3<<8) + +#define S3C2440_DSC1_CS3 (S3C2440_SELECT_DSC1 | 6) +#define S3C2440_DSC1_CS3_10mA (0<<6) +#define S3C2440_DSC1_CS3_8mA (1<<6) +#define S3C2440_DSC1_CS3_6mA (2<<6) +#define S3C2440_DSC1_CS3_4mA (3<<6) +#define S3C2440_DSC1_CS3_MASK (3<<6) + +#define S3C2440_DSC1_CS2 (S3C2440_SELECT_DSC1 | 4) +#define S3C2440_DSC1_CS2_10mA (0<<4) +#define S3C2440_DSC1_CS2_8mA (1<<4) +#define S3C2440_DSC1_CS2_6mA (2<<4) +#define S3C2440_DSC1_CS2_4mA (3<<4) +#define S3C2440_DSC1_CS2_MASK (3<<4) + +#define S3C2440_DSC1_CS1 (S3C2440_SELECT_DSC1 | 2) +#define S3C2440_DSC1_CS1_10mA (0<<2) +#define S3C2440_DSC1_CS1_8mA (1<<2) +#define S3C2440_DSC1_CS1_6mA (2<<2) +#define S3C2440_DSC1_CS1_4mA (3<<2) +#define S3C2440_DSC1_CS1_MASK (3<<2) + +#define S3C2440_DSC1_CS0 (S3C2440_SELECT_DSC1 | 0) +#define S3C2440_DSC1_CS0_10mA (0<<0) +#define S3C2440_DSC1_CS0_8mA (1<<0) +#define S3C2440_DSC1_CS0_6mA (2<<0) +#define S3C2440_DSC1_CS0_4mA (3<<0) +#define S3C2440_DSC1_CS0_MASK (3<<0) + +#endif /* CONFIG_CPU_S3C2440 */ + +#endif /* __ASM_ARCH_REGS_DSC_H */ + diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h new file mode 100644 index 000000000000..30bec027f5fa --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h @@ -0,0 +1,1163 @@ +/* arch/arm/mach-s3c2410/include/mach/regs-gpio.h + * + * Copyright (c) 2003,2004 Simtec Electronics + * http://www.simtec.co.uk/products/SWLINUX/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2410 GPIO register definitions +*/ + + +#ifndef __ASM_ARCH_REGS_GPIO_H +#define __ASM_ARCH_REGS_GPIO_H "$Id: gpio.h,v 1.5 2003/05/19 12:51:08 ben Exp $" + +#define S3C2410_GPIONO(bank,offset) ((bank) + (offset)) + +#define S3C2410_GPIO_BANKA (32*0) +#define S3C2410_GPIO_BANKB (32*1) +#define S3C2410_GPIO_BANKC (32*2) +#define S3C2410_GPIO_BANKD (32*3) +#define S3C2410_GPIO_BANKE (32*4) +#define S3C2410_GPIO_BANKF (32*5) +#define S3C2410_GPIO_BANKG (32*6) +#define S3C2410_GPIO_BANKH (32*7) + +#ifdef CONFIG_CPU_S3C2400 +#define S3C24XX_GPIO_BASE(x) S3C2400_GPIO_BASE(x) +#define S3C24XX_MISCCR S3C2400_MISCCR +#else +#define S3C24XX_GPIO_BASE(x) S3C2410_GPIO_BASE(x) +#define S3C24XX_MISCCR S3C24XX_GPIOREG2(0x80) +#endif /* CONFIG_CPU_S3C2400 */ + + +/* S3C2400 doesn't have a 1:1 mapping to S3C2410 gpio base pins */ + +#define S3C2400_BANKNUM(pin) (((pin) & ~31) / 32) +#define S3C2400_BASEA2B(pin) ((((pin) & ~31) >> 2)) +#define S3C2400_BASEC2H(pin) ((S3C2400_BANKNUM(pin) * 10) + \ + (2 * (S3C2400_BANKNUM(pin)-2))) + +#define S3C2400_GPIO_BASE(pin) (pin < S3C2410_GPIO_BANKC ? \ + S3C2400_BASEA2B(pin)+S3C24XX_VA_GPIO : \ + S3C2400_BASEC2H(pin)+S3C24XX_VA_GPIO) + + +#define S3C2410_GPIO_BASE(pin) ((((pin) & ~31) >> 1) + S3C24XX_VA_GPIO) +#define S3C2410_GPIO_OFFSET(pin) ((pin) & 31) + +/* general configuration options */ + +#define S3C2410_GPIO_LEAVE (0xFFFFFFFF) +#define S3C2410_GPIO_INPUT (0xFFFFFFF0) /* not available on A */ +#define S3C2410_GPIO_OUTPUT (0xFFFFFFF1) +#define S3C2410_GPIO_IRQ (0xFFFFFFF2) /* not available for all */ +#define S3C2410_GPIO_SFN2 (0xFFFFFFF2) /* bank A => addr/cs/nand */ +#define S3C2410_GPIO_SFN3 (0xFFFFFFF3) /* not available on A */ + +/* register address for the GPIO registers. + * S3C24XX_GPIOREG2 is for the second set of registers in the + * GPIO which move between s3c2410 and s3c2412 type systems */ + +#define S3C2410_GPIOREG(x) ((x) + S3C24XX_VA_GPIO) +#define S3C24XX_GPIOREG2(x) ((x) + S3C24XX_VA_GPIO2) + + +/* configure GPIO ports A..G */ + +/* port A - S3C2410: 22bits, zero in bit X makes pin X output + * S3C2400: 18bits, zero in bit X makes pin X output + * 1 makes port special function, this is default +*/ +#define S3C2410_GPACON S3C2410_GPIOREG(0x00) +#define S3C2410_GPADAT S3C2410_GPIOREG(0x04) + +#define S3C2400_GPACON S3C2410_GPIOREG(0x00) +#define S3C2400_GPADAT S3C2410_GPIOREG(0x04) + +#define S3C2410_GPA0 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 0) +#define S3C2410_GPA0_OUT (0<<0) +#define S3C2410_GPA0_ADDR0 (1<<0) + +#define S3C2410_GPA1 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 1) +#define S3C2410_GPA1_OUT (0<<1) +#define S3C2410_GPA1_ADDR16 (1<<1) + +#define S3C2410_GPA2 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 2) +#define S3C2410_GPA2_OUT (0<<2) +#define S3C2410_GPA2_ADDR17 (1<<2) + +#define S3C2410_GPA3 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 3) +#define S3C2410_GPA3_OUT (0<<3) +#define S3C2410_GPA3_ADDR18 (1<<3) + +#define S3C2410_GPA4 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 4) +#define S3C2410_GPA4_OUT (0<<4) +#define S3C2410_GPA4_ADDR19 (1<<4) + +#define S3C2410_GPA5 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 5) +#define S3C2410_GPA5_OUT (0<<5) +#define S3C2410_GPA5_ADDR20 (1<<5) + +#define S3C2410_GPA6 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 6) +#define S3C2410_GPA6_OUT (0<<6) +#define S3C2410_GPA6_ADDR21 (1<<6) + +#define S3C2410_GPA7 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 7) +#define S3C2410_GPA7_OUT (0<<7) +#define S3C2410_GPA7_ADDR22 (1<<7) + +#define S3C2410_GPA8 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 8) +#define S3C2410_GPA8_OUT (0<<8) +#define S3C2410_GPA8_ADDR23 (1<<8) + +#define S3C2410_GPA9 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 9) +#define S3C2410_GPA9_OUT (0<<9) +#define S3C2410_GPA9_ADDR24 (1<<9) + +#define S3C2410_GPA10 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 10) +#define S3C2410_GPA10_OUT (0<<10) +#define S3C2410_GPA10_ADDR25 (1<<10) +#define S3C2400_GPA10_SCKE (1<<10) + +#define S3C2410_GPA11 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 11) +#define S3C2410_GPA11_OUT (0<<11) +#define S3C2410_GPA11_ADDR26 (1<<11) +#define S3C2400_GPA11_nCAS0 (1<<11) + +#define S3C2410_GPA12 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 12) +#define S3C2410_GPA12_OUT (0<<12) +#define S3C2410_GPA12_nGCS1 (1<<12) +#define S3C2400_GPA12_nCAS1 (1<<12) + +#define S3C2410_GPA13 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 13) +#define S3C2410_GPA13_OUT (0<<13) +#define S3C2410_GPA13_nGCS2 (1<<13) +#define S3C2400_GPA13_nGCS1 (1<<13) + +#define S3C2410_GPA14 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 14) +#define S3C2410_GPA14_OUT (0<<14) +#define S3C2410_GPA14_nGCS3 (1<<14) +#define S3C2400_GPA14_nGCS2 (1<<14) + +#define S3C2410_GPA15 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 15) +#define S3C2410_GPA15_OUT (0<<15) +#define S3C2410_GPA15_nGCS4 (1<<15) +#define S3C2400_GPA15_nGCS3 (1<<15) + +#define S3C2410_GPA16 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 16) +#define S3C2410_GPA16_OUT (0<<16) +#define S3C2410_GPA16_nGCS5 (1<<16) +#define S3C2400_GPA16_nGCS4 (1<<16) + +#define S3C2410_GPA17 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 17) +#define S3C2410_GPA17_OUT (0<<17) +#define S3C2410_GPA17_CLE (1<<17) +#define S3C2400_GPA17_nGCS5 (1<<17) + +#define S3C2410_GPA18 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 18) +#define S3C2410_GPA18_OUT (0<<18) +#define S3C2410_GPA18_ALE (1<<18) + +#define S3C2410_GPA19 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 19) +#define S3C2410_GPA19_OUT (0<<19) +#define S3C2410_GPA19_nFWE (1<<19) + +#define S3C2410_GPA20 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 20) +#define S3C2410_GPA20_OUT (0<<20) +#define S3C2410_GPA20_nFRE (1<<20) + +#define S3C2410_GPA21 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 21) +#define S3C2410_GPA21_OUT (0<<21) +#define S3C2410_GPA21_nRSTOUT (1<<21) + +#define S3C2410_GPA22 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 22) +#define S3C2410_GPA22_OUT (0<<22) +#define S3C2410_GPA22_nFCE (1<<22) + +/* 0x08 and 0x0c are reserved on S3C2410 */ + +/* S3C2410: + * GPB is 10 IO pins, each configured by 2 bits each in GPBCON. + * 00 = input, 01 = output, 10=special function, 11=reserved + + * S3C2400: + * GPB is 16 IO pins, each configured by 2 bits each in GPBCON. + * 00 = input, 01 = output, 10=data, 11=special function + + * bit 0,1 = pin 0, 2,3= pin 1... + * + * CPBUP = pull up resistor control, 1=disabled, 0=enabled +*/ + +#define S3C2410_GPBCON S3C2410_GPIOREG(0x10) +#define S3C2410_GPBDAT S3C2410_GPIOREG(0x14) +#define S3C2410_GPBUP S3C2410_GPIOREG(0x18) + +#define S3C2400_GPBCON S3C2410_GPIOREG(0x08) +#define S3C2400_GPBDAT S3C2410_GPIOREG(0x0C) +#define S3C2400_GPBUP S3C2410_GPIOREG(0x10) + +/* no i/o pin in port b can have value 3 (unless it is a s3c2443) ! */ + +#define S3C2410_GPB0 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 0) +#define S3C2410_GPB0_INP (0x00 << 0) +#define S3C2410_GPB0_OUTP (0x01 << 0) +#define S3C2410_GPB0_TOUT0 (0x02 << 0) +#define S3C2400_GPB0_DATA16 (0x02 << 0) + +#define S3C2410_GPB1 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 1) +#define S3C2410_GPB1_INP (0x00 << 2) +#define S3C2410_GPB1_OUTP (0x01 << 2) +#define S3C2410_GPB1_TOUT1 (0x02 << 2) +#define S3C2400_GPB1_DATA17 (0x02 << 2) + +#define S3C2410_GPB2 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 2) +#define S3C2410_GPB2_INP (0x00 << 4) +#define S3C2410_GPB2_OUTP (0x01 << 4) +#define S3C2410_GPB2_TOUT2 (0x02 << 4) +#define S3C2400_GPB2_DATA18 (0x02 << 4) +#define S3C2400_GPB2_TCLK1 (0x03 << 4) + +#define S3C2410_GPB3 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 3) +#define S3C2410_GPB3_INP (0x00 << 6) +#define S3C2410_GPB3_OUTP (0x01 << 6) +#define S3C2410_GPB3_TOUT3 (0x02 << 6) +#define S3C2400_GPB3_DATA19 (0x02 << 6) +#define S3C2400_GPB3_TXD1 (0x03 << 6) + +#define S3C2410_GPB4 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 4) +#define S3C2410_GPB4_INP (0x00 << 8) +#define S3C2410_GPB4_OUTP (0x01 << 8) +#define S3C2410_GPB4_TCLK0 (0x02 << 8) +#define S3C2400_GPB4_DATA20 (0x02 << 8) +#define S3C2410_GPB4_MASK (0x03 << 8) +#define S3C2400_GPB4_RXD1 (0x03 << 8) +#define S3C2400_GPB4_MASK (0x03 << 8) + +#define S3C2410_GPB5 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 5) +#define S3C2410_GPB5_INP (0x00 << 10) +#define S3C2410_GPB5_OUTP (0x01 << 10) +#define S3C2410_GPB5_nXBACK (0x02 << 10) +#define S3C2443_GPB5_XBACK (0x03 << 10) +#define S3C2400_GPB5_DATA21 (0x02 << 10) +#define S3C2400_GPB5_nCTS1 (0x03 << 10) + +#define S3C2410_GPB6 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 6) +#define S3C2410_GPB6_INP (0x00 << 12) +#define S3C2410_GPB6_OUTP (0x01 << 12) +#define S3C2410_GPB6_nXBREQ (0x02 << 12) +#define S3C2443_GPB6_XBREQ (0x03 << 12) +#define S3C2400_GPB6_DATA22 (0x02 << 12) +#define S3C2400_GPB6_nRTS1 (0x03 << 12) + +#define S3C2410_GPB7 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 7) +#define S3C2410_GPB7_INP (0x00 << 14) +#define S3C2410_GPB7_OUTP (0x01 << 14) +#define S3C2410_GPB7_nXDACK1 (0x02 << 14) +#define S3C2443_GPB7_XDACK1 (0x03 << 14) +#define S3C2400_GPB7_DATA23 (0x02 << 14) + +#define S3C2410_GPB8 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 8) +#define S3C2410_GPB8_INP (0x00 << 16) +#define S3C2410_GPB8_OUTP (0x01 << 16) +#define S3C2410_GPB8_nXDREQ1 (0x02 << 16) +#define S3C2400_GPB8_DATA24 (0x02 << 16) + +#define S3C2410_GPB9 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 9) +#define S3C2410_GPB9_INP (0x00 << 18) +#define S3C2410_GPB9_OUTP (0x01 << 18) +#define S3C2410_GPB9_nXDACK0 (0x02 << 18) +#define S3C2443_GPB9_XDACK0 (0x03 << 18) +#define S3C2400_GPB9_DATA25 (0x02 << 18) +#define S3C2400_GPB9_I2SSDI (0x03 << 18) + +#define S3C2410_GPB10 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 10) +#define S3C2410_GPB10_INP (0x00 << 20) +#define S3C2410_GPB10_OUTP (0x01 << 20) +#define S3C2410_GPB10_nXDRE0 (0x02 << 20) +#define S3C2443_GPB10_XDREQ0 (0x03 << 20) +#define S3C2400_GPB10_DATA26 (0x02 << 20) +#define S3C2400_GPB10_nSS (0x03 << 20) + +#define S3C2400_GPB11 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 11) +#define S3C2400_GPB11_INP (0x00 << 22) +#define S3C2400_GPB11_OUTP (0x01 << 22) +#define S3C2400_GPB11_DATA27 (0x02 << 22) + +#define S3C2400_GPB12 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 12) +#define S3C2400_GPB12_INP (0x00 << 24) +#define S3C2400_GPB12_OUTP (0x01 << 24) +#define S3C2400_GPB12_DATA28 (0x02 << 24) + +#define S3C2400_GPB13 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 13) +#define S3C2400_GPB13_INP (0x00 << 26) +#define S3C2400_GPB13_OUTP (0x01 << 26) +#define S3C2400_GPB13_DATA29 (0x02 << 26) + +#define S3C2400_GPB14 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 14) +#define S3C2400_GPB14_INP (0x00 << 28) +#define S3C2400_GPB14_OUTP (0x01 << 28) +#define S3C2400_GPB14_DATA30 (0x02 << 28) + +#define S3C2400_GPB15 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 15) +#define S3C2400_GPB15_INP (0x00 << 30) +#define S3C2400_GPB15_OUTP (0x01 << 30) +#define S3C2400_GPB15_DATA31 (0x02 << 30) + +#define S3C2410_GPB_PUPDIS(x) (1<<(x)) + +/* Port C consits of 16 GPIO/Special function + * + * almost identical setup to port b, but the special functions are mostly + * to do with the video system's sync/etc. +*/ + +#define S3C2410_GPCCON S3C2410_GPIOREG(0x20) +#define S3C2410_GPCDAT S3C2410_GPIOREG(0x24) +#define S3C2410_GPCUP S3C2410_GPIOREG(0x28) + +#define S3C2400_GPCCON S3C2410_GPIOREG(0x14) +#define S3C2400_GPCDAT S3C2410_GPIOREG(0x18) +#define S3C2400_GPCUP S3C2410_GPIOREG(0x1C) + +#define S3C2410_GPC0 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 0) +#define S3C2410_GPC0_INP (0x00 << 0) +#define S3C2410_GPC0_OUTP (0x01 << 0) +#define S3C2410_GPC0_LEND (0x02 << 0) +#define S3C2400_GPC0_VD0 (0x02 << 0) + +#define S3C2410_GPC1 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 1) +#define S3C2410_GPC1_INP (0x00 << 2) +#define S3C2410_GPC1_OUTP (0x01 << 2) +#define S3C2410_GPC1_VCLK (0x02 << 2) +#define S3C2400_GPC1_VD1 (0x02 << 2) + +#define S3C2410_GPC2 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 2) +#define S3C2410_GPC2_INP (0x00 << 4) +#define S3C2410_GPC2_OUTP (0x01 << 4) +#define S3C2410_GPC2_VLINE (0x02 << 4) +#define S3C2400_GPC2_VD2 (0x02 << 4) + +#define S3C2410_GPC3 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 3) +#define S3C2410_GPC3_INP (0x00 << 6) +#define S3C2410_GPC3_OUTP (0x01 << 6) +#define S3C2410_GPC3_VFRAME (0x02 << 6) +#define S3C2400_GPC3_VD3 (0x02 << 6) + +#define S3C2410_GPC4 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 4) +#define S3C2410_GPC4_INP (0x00 << 8) +#define S3C2410_GPC4_OUTP (0x01 << 8) +#define S3C2410_GPC4_VM (0x02 << 8) +#define S3C2400_GPC4_VD4 (0x02 << 8) + +#define S3C2410_GPC5 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 5) +#define S3C2410_GPC5_INP (0x00 << 10) +#define S3C2410_GPC5_OUTP (0x01 << 10) +#define S3C2410_GPC5_LCDVF0 (0x02 << 10) +#define S3C2400_GPC5_VD5 (0x02 << 10) + +#define S3C2410_GPC6 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 6) +#define S3C2410_GPC6_INP (0x00 << 12) +#define S3C2410_GPC6_OUTP (0x01 << 12) +#define S3C2410_GPC6_LCDVF1 (0x02 << 12) +#define S3C2400_GPC6_VD6 (0x02 << 12) + +#define S3C2410_GPC7 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 7) +#define S3C2410_GPC7_INP (0x00 << 14) +#define S3C2410_GPC7_OUTP (0x01 << 14) +#define S3C2410_GPC7_LCDVF2 (0x02 << 14) +#define S3C2400_GPC7_VD7 (0x02 << 14) + +#define S3C2410_GPC8 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 8) +#define S3C2410_GPC8_INP (0x00 << 16) +#define S3C2410_GPC8_OUTP (0x01 << 16) +#define S3C2410_GPC8_VD0 (0x02 << 16) +#define S3C2400_GPC8_VD8 (0x02 << 16) + +#define S3C2410_GPC9 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 9) +#define S3C2410_GPC9_INP (0x00 << 18) +#define S3C2410_GPC9_OUTP (0x01 << 18) +#define S3C2410_GPC9_VD1 (0x02 << 18) +#define S3C2400_GPC9_VD9 (0x02 << 18) + +#define S3C2410_GPC10 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 10) +#define S3C2410_GPC10_INP (0x00 << 20) +#define S3C2410_GPC10_OUTP (0x01 << 20) +#define S3C2410_GPC10_VD2 (0x02 << 20) +#define S3C2400_GPC10_VD10 (0x02 << 20) + +#define S3C2410_GPC11 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 11) +#define S3C2410_GPC11_INP (0x00 << 22) +#define S3C2410_GPC11_OUTP (0x01 << 22) +#define S3C2410_GPC11_VD3 (0x02 << 22) +#define S3C2400_GPC11_VD11 (0x02 << 22) + +#define S3C2410_GPC12 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 12) +#define S3C2410_GPC12_INP (0x00 << 24) +#define S3C2410_GPC12_OUTP (0x01 << 24) +#define S3C2410_GPC12_VD4 (0x02 << 24) +#define S3C2400_GPC12_VD12 (0x02 << 24) + +#define S3C2410_GPC13 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 13) +#define S3C2410_GPC13_INP (0x00 << 26) +#define S3C2410_GPC13_OUTP (0x01 << 26) +#define S3C2410_GPC13_VD5 (0x02 << 26) +#define S3C2400_GPC13_VD13 (0x02 << 26) + +#define S3C2410_GPC14 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 14) +#define S3C2410_GPC14_INP (0x00 << 28) +#define S3C2410_GPC14_OUTP (0x01 << 28) +#define S3C2410_GPC14_VD6 (0x02 << 28) +#define S3C2400_GPC14_VD14 (0x02 << 28) + +#define S3C2410_GPC15 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 15) +#define S3C2410_GPC15_INP (0x00 << 30) +#define S3C2410_GPC15_OUTP (0x01 << 30) +#define S3C2410_GPC15_VD7 (0x02 << 30) +#define S3C2400_GPC15_VD15 (0x02 << 30) + +#define S3C2410_GPC_PUPDIS(x) (1<<(x)) + +/* + * S3C2410: Port D consists of 16 GPIO/Special function + * + * almost identical setup to port b, but the special functions are mostly + * to do with the video system's data. + * + * S3C2400: Port D consists of 11 GPIO/Special function + * + * almost identical setup to port c +*/ + +#define S3C2410_GPDCON S3C2410_GPIOREG(0x30) +#define S3C2410_GPDDAT S3C2410_GPIOREG(0x34) +#define S3C2410_GPDUP S3C2410_GPIOREG(0x38) + +#define S3C2400_GPDCON S3C2410_GPIOREG(0x20) +#define S3C2400_GPDDAT S3C2410_GPIOREG(0x24) +#define S3C2400_GPDUP S3C2410_GPIOREG(0x28) + +#define S3C2410_GPD0 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 0) +#define S3C2410_GPD0_INP (0x00 << 0) +#define S3C2410_GPD0_OUTP (0x01 << 0) +#define S3C2410_GPD0_VD8 (0x02 << 0) +#define S3C2400_GPD0_VFRAME (0x02 << 0) +#define S3C2442_GPD0_nSPICS1 (0x03 << 0) + +#define S3C2410_GPD1 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 1) +#define S3C2410_GPD1_INP (0x00 << 2) +#define S3C2410_GPD1_OUTP (0x01 << 2) +#define S3C2410_GPD1_VD9 (0x02 << 2) +#define S3C2400_GPD1_VM (0x02 << 2) +#define S3C2442_GPD1_SPICLK1 (0x03 << 2) + +#define S3C2410_GPD2 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 2) +#define S3C2410_GPD2_INP (0x00 << 4) +#define S3C2410_GPD2_OUTP (0x01 << 4) +#define S3C2410_GPD2_VD10 (0x02 << 4) +#define S3C2400_GPD2_VLINE (0x02 << 4) + +#define S3C2410_GPD3 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 3) +#define S3C2410_GPD3_INP (0x00 << 6) +#define S3C2410_GPD3_OUTP (0x01 << 6) +#define S3C2410_GPD3_VD11 (0x02 << 6) +#define S3C2400_GPD3_VCLK (0x02 << 6) + +#define S3C2410_GPD4 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 4) +#define S3C2410_GPD4_INP (0x00 << 8) +#define S3C2410_GPD4_OUTP (0x01 << 8) +#define S3C2410_GPD4_VD12 (0x02 << 8) +#define S3C2400_GPD4_LEND (0x02 << 8) + +#define S3C2410_GPD5 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 5) +#define S3C2410_GPD5_INP (0x00 << 10) +#define S3C2410_GPD5_OUTP (0x01 << 10) +#define S3C2410_GPD5_VD13 (0x02 << 10) +#define S3C2400_GPD5_TOUT0 (0x02 << 10) + +#define S3C2410_GPD6 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 6) +#define S3C2410_GPD6_INP (0x00 << 12) +#define S3C2410_GPD6_OUTP (0x01 << 12) +#define S3C2410_GPD6_VD14 (0x02 << 12) +#define S3C2400_GPD6_TOUT1 (0x02 << 12) + +#define S3C2410_GPD7 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 7) +#define S3C2410_GPD7_INP (0x00 << 14) +#define S3C2410_GPD7_OUTP (0x01 << 14) +#define S3C2410_GPD7_VD15 (0x02 << 14) +#define S3C2400_GPD7_TOUT2 (0x02 << 14) + +#define S3C2410_GPD8 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 8) +#define S3C2410_GPD8_INP (0x00 << 16) +#define S3C2410_GPD8_OUTP (0x01 << 16) +#define S3C2410_GPD8_VD16 (0x02 << 16) +#define S3C2400_GPD8_TOUT3 (0x02 << 16) + +#define S3C2410_GPD9 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 9) +#define S3C2410_GPD9_INP (0x00 << 18) +#define S3C2410_GPD9_OUTP (0x01 << 18) +#define S3C2410_GPD9_VD17 (0x02 << 18) +#define S3C2400_GPD9_TCLK0 (0x02 << 18) +#define S3C2410_GPD9_MASK (0x03 << 18) + +#define S3C2410_GPD10 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 10) +#define S3C2410_GPD10_INP (0x00 << 20) +#define S3C2410_GPD10_OUTP (0x01 << 20) +#define S3C2410_GPD10_VD18 (0x02 << 20) +#define S3C2400_GPD10_nWAIT (0x02 << 20) + +#define S3C2410_GPD11 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 11) +#define S3C2410_GPD11_INP (0x00 << 22) +#define S3C2410_GPD11_OUTP (0x01 << 22) +#define S3C2410_GPD11_VD19 (0x02 << 22) + +#define S3C2410_GPD12 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 12) +#define S3C2410_GPD12_INP (0x00 << 24) +#define S3C2410_GPD12_OUTP (0x01 << 24) +#define S3C2410_GPD12_VD20 (0x02 << 24) + +#define S3C2410_GPD13 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 13) +#define S3C2410_GPD13_INP (0x00 << 26) +#define S3C2410_GPD13_OUTP (0x01 << 26) +#define S3C2410_GPD13_VD21 (0x02 << 26) + +#define S3C2410_GPD14 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 14) +#define S3C2410_GPD14_INP (0x00 << 28) +#define S3C2410_GPD14_OUTP (0x01 << 28) +#define S3C2410_GPD14_VD22 (0x02 << 28) +#define S3C2410_GPD14_nSS1 (0x03 << 28) + +#define S3C2410_GPD15 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 15) +#define S3C2410_GPD15_INP (0x00 << 30) +#define S3C2410_GPD15_OUTP (0x01 << 30) +#define S3C2410_GPD15_VD23 (0x02 << 30) +#define S3C2410_GPD15_nSS0 (0x03 << 30) + +#define S3C2410_GPD_PUPDIS(x) (1<<(x)) + +/* S3C2410: + * Port E consists of 16 GPIO/Special function + * + * again, the same as port B, but dealing with I2S, SDI, and + * more miscellaneous functions + * + * S3C2400: + * Port E consists of 12 GPIO/Special function + * + * GPIO / interrupt inputs +*/ + +#define S3C2410_GPECON S3C2410_GPIOREG(0x40) +#define S3C2410_GPEDAT S3C2410_GPIOREG(0x44) +#define S3C2410_GPEUP S3C2410_GPIOREG(0x48) + +#define S3C2400_GPECON S3C2410_GPIOREG(0x2C) +#define S3C2400_GPEDAT S3C2410_GPIOREG(0x30) +#define S3C2400_GPEUP S3C2410_GPIOREG(0x34) + +#define S3C2410_GPE0 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 0) +#define S3C2410_GPE0_INP (0x00 << 0) +#define S3C2410_GPE0_OUTP (0x01 << 0) +#define S3C2410_GPE0_I2SLRCK (0x02 << 0) +#define S3C2443_GPE0_AC_nRESET (0x03 << 0) +#define S3C2400_GPE0_EINT0 (0x02 << 0) +#define S3C2410_GPE0_MASK (0x03 << 0) + +#define S3C2410_GPE1 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 1) +#define S3C2410_GPE1_INP (0x00 << 2) +#define S3C2410_GPE1_OUTP (0x01 << 2) +#define S3C2410_GPE1_I2SSCLK (0x02 << 2) +#define S3C2443_GPE1_AC_SYNC (0x03 << 2) +#define S3C2400_GPE1_EINT1 (0x02 << 2) +#define S3C2400_GPE1_nSS (0x03 << 2) +#define S3C2410_GPE1_MASK (0x03 << 2) + +#define S3C2410_GPE2 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 2) +#define S3C2410_GPE2_INP (0x00 << 4) +#define S3C2410_GPE2_OUTP (0x01 << 4) +#define S3C2410_GPE2_CDCLK (0x02 << 4) +#define S3C2443_GPE2_AC_BITCLK (0x03 << 4) +#define S3C2400_GPE2_EINT2 (0x02 << 4) +#define S3C2400_GPE2_I2SSDI (0x03 << 4) + +#define S3C2410_GPE3 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 3) +#define S3C2410_GPE3_INP (0x00 << 6) +#define S3C2410_GPE3_OUTP (0x01 << 6) +#define S3C2410_GPE3_I2SSDI (0x02 << 6) +#define S3C2443_GPE3_AC_SDI (0x03 << 6) +#define S3C2400_GPE3_EINT3 (0x02 << 6) +#define S3C2400_GPE3_nCTS1 (0x03 << 6) +#define S3C2410_GPE3_nSS0 (0x03 << 6) +#define S3C2410_GPE3_MASK (0x03 << 6) + +#define S3C2410_GPE4 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 4) +#define S3C2410_GPE4_INP (0x00 << 8) +#define S3C2410_GPE4_OUTP (0x01 << 8) +#define S3C2410_GPE4_I2SSDO (0x02 << 8) +#define S3C2443_GPE4_AC_SDO (0x03 << 8) +#define S3C2400_GPE4_EINT4 (0x02 << 8) +#define S3C2400_GPE4_nRTS1 (0x03 << 8) +#define S3C2410_GPE4_I2SSDI (0x03 << 8) +#define S3C2410_GPE4_MASK (0x03 << 8) + +#define S3C2410_GPE5 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 5) +#define S3C2410_GPE5_INP (0x00 << 10) +#define S3C2410_GPE5_OUTP (0x01 << 10) +#define S3C2410_GPE5_SDCLK (0x02 << 10) +#define S3C2443_GPE5_SD1_CLK (0x02 << 10) +#define S3C2400_GPE5_EINT5 (0x02 << 10) +#define S3C2400_GPE5_TCLK1 (0x03 << 10) + +#define S3C2410_GPE6 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 6) +#define S3C2410_GPE6_INP (0x00 << 12) +#define S3C2410_GPE6_OUTP (0x01 << 12) +#define S3C2410_GPE6_SDCMD (0x02 << 12) +#define S3C2443_GPE6_SD1_CMD (0x02 << 12) +#define S3C2443_GPE6_AC_BITCLK (0x03 << 12) +#define S3C2400_GPE6_EINT6 (0x02 << 12) + +#define S3C2410_GPE7 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 7) +#define S3C2410_GPE7_INP (0x00 << 14) +#define S3C2410_GPE7_OUTP (0x01 << 14) +#define S3C2410_GPE7_SDDAT0 (0x02 << 14) +#define S3C2443_GPE5_SD1_DAT0 (0x02 << 14) +#define S3C2443_GPE7_AC_SDI (0x03 << 14) +#define S3C2400_GPE7_EINT7 (0x02 << 14) + +#define S3C2410_GPE8 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 8) +#define S3C2410_GPE8_INP (0x00 << 16) +#define S3C2410_GPE8_OUTP (0x01 << 16) +#define S3C2410_GPE8_SDDAT1 (0x02 << 16) +#define S3C2443_GPE8_SD1_DAT1 (0x02 << 16) +#define S3C2443_GPE8_AC_SDO (0x03 << 16) +#define S3C2400_GPE8_nXDACK0 (0x02 << 16) + +#define S3C2410_GPE9 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 9) +#define S3C2410_GPE9_INP (0x00 << 18) +#define S3C2410_GPE9_OUTP (0x01 << 18) +#define S3C2410_GPE9_SDDAT2 (0x02 << 18) +#define S3C2443_GPE9_SD1_DAT2 (0x02 << 18) +#define S3C2443_GPE9_AC_SYNC (0x03 << 18) +#define S3C2400_GPE9_nXDACK1 (0x02 << 18) +#define S3C2400_GPE9_nXBACK (0x03 << 18) + +#define S3C2410_GPE10 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 10) +#define S3C2410_GPE10_INP (0x00 << 20) +#define S3C2410_GPE10_OUTP (0x01 << 20) +#define S3C2410_GPE10_SDDAT3 (0x02 << 20) +#define S3C2443_GPE10_SD1_DAT3 (0x02 << 20) +#define S3C2443_GPE10_AC_nRESET (0x03 << 20) +#define S3C2400_GPE10_nXDREQ0 (0x02 << 20) + +#define S3C2410_GPE11 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 11) +#define S3C2410_GPE11_INP (0x00 << 22) +#define S3C2410_GPE11_OUTP (0x01 << 22) +#define S3C2410_GPE11_SPIMISO0 (0x02 << 22) +#define S3C2400_GPE11_nXDREQ1 (0x02 << 22) +#define S3C2400_GPE11_nXBREQ (0x03 << 22) + +#define S3C2410_GPE12 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 12) +#define S3C2410_GPE12_INP (0x00 << 24) +#define S3C2410_GPE12_OUTP (0x01 << 24) +#define S3C2410_GPE12_SPIMOSI0 (0x02 << 24) + +#define S3C2410_GPE13 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 13) +#define S3C2410_GPE13_INP (0x00 << 26) +#define S3C2410_GPE13_OUTP (0x01 << 26) +#define S3C2410_GPE13_SPICLK0 (0x02 << 26) + +#define S3C2410_GPE14 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 14) +#define S3C2410_GPE14_INP (0x00 << 28) +#define S3C2410_GPE14_OUTP (0x01 << 28) +#define S3C2410_GPE14_IICSCL (0x02 << 28) +#define S3C2410_GPE14_MASK (0x03 << 28) + +#define S3C2410_GPE15 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 15) +#define S3C2410_GPE15_INP (0x00 << 30) +#define S3C2410_GPE15_OUTP (0x01 << 30) +#define S3C2410_GPE15_IICSDA (0x02 << 30) +#define S3C2410_GPE15_MASK (0x03 << 30) + +#define S3C2440_GPE0_ACSYNC (0x03 << 0) +#define S3C2440_GPE1_ACBITCLK (0x03 << 2) +#define S3C2440_GPE2_ACRESET (0x03 << 4) +#define S3C2440_GPE3_ACIN (0x03 << 6) +#define S3C2440_GPE4_ACOUT (0x03 << 8) + +#define S3C2410_GPE_PUPDIS(x) (1<<(x)) + +/* S3C2410: + * Port F consists of 8 GPIO/Special function + * + * GPIO / interrupt inputs + * + * GPFCON has 2 bits for each of the input pins on port F + * 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 undefined + * + * pull up works like all other ports. + * + * S3C2400: + * Port F consists of 7 GPIO/Special function + * + * GPIO/serial/misc pins +*/ + +#define S3C2410_GPFCON S3C2410_GPIOREG(0x50) +#define S3C2410_GPFDAT S3C2410_GPIOREG(0x54) +#define S3C2410_GPFUP S3C2410_GPIOREG(0x58) + +#define S3C2400_GPFCON S3C2410_GPIOREG(0x38) +#define S3C2400_GPFDAT S3C2410_GPIOREG(0x3C) +#define S3C2400_GPFUP S3C2410_GPIOREG(0x40) + +#define S3C2410_GPF0 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 0) +#define S3C2410_GPF0_INP (0x00 << 0) +#define S3C2410_GPF0_OUTP (0x01 << 0) +#define S3C2410_GPF0_EINT0 (0x02 << 0) +#define S3C2400_GPF0_RXD0 (0x02 << 0) + +#define S3C2410_GPF1 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 1) +#define S3C2410_GPF1_INP (0x00 << 2) +#define S3C2410_GPF1_OUTP (0x01 << 2) +#define S3C2410_GPF1_EINT1 (0x02 << 2) +#define S3C2400_GPF1_RXD1 (0x02 << 2) +#define S3C2400_GPF1_IICSDA (0x03 << 2) + +#define S3C2410_GPF2 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 2) +#define S3C2410_GPF2_INP (0x00 << 4) +#define S3C2410_GPF2_OUTP (0x01 << 4) +#define S3C2410_GPF2_EINT2 (0x02 << 4) +#define S3C2400_GPF2_TXD0 (0x02 << 4) + +#define S3C2410_GPF3 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 3) +#define S3C2410_GPF3_INP (0x00 << 6) +#define S3C2410_GPF3_OUTP (0x01 << 6) +#define S3C2410_GPF3_EINT3 (0x02 << 6) +#define S3C2400_GPF3_TXD1 (0x02 << 6) +#define S3C2400_GPF3_IICSCL (0x03 << 6) + +#define S3C2410_GPF4 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 4) +#define S3C2410_GPF4_INP (0x00 << 8) +#define S3C2410_GPF4_OUTP (0x01 << 8) +#define S3C2410_GPF4_EINT4 (0x02 << 8) +#define S3C2400_GPF4_nRTS0 (0x02 << 8) +#define S3C2400_GPF4_nXBACK (0x03 << 8) + +#define S3C2410_GPF5 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 5) +#define S3C2410_GPF5_INP (0x00 << 10) +#define S3C2410_GPF5_OUTP (0x01 << 10) +#define S3C2410_GPF5_EINT5 (0x02 << 10) +#define S3C2400_GPF5_nCTS0 (0x02 << 10) +#define S3C2400_GPF5_nXBREQ (0x03 << 10) + +#define S3C2410_GPF6 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 6) +#define S3C2410_GPF6_INP (0x00 << 12) +#define S3C2410_GPF6_OUTP (0x01 << 12) +#define S3C2410_GPF6_EINT6 (0x02 << 12) +#define S3C2400_GPF6_CLKOUT (0x02 << 12) + +#define S3C2410_GPF7 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 7) +#define S3C2410_GPF7_INP (0x00 << 14) +#define S3C2410_GPF7_OUTP (0x01 << 14) +#define S3C2410_GPF7_EINT7 (0x02 << 14) + +#define S3C2410_GPF_PUPDIS(x) (1<<(x)) + +/* S3C2410: + * Port G consists of 8 GPIO/IRQ/Special function + * + * GPGCON has 2 bits for each of the input pins on port F + * 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func + * + * pull up works like all other ports. + * + * S3C2400: + * Port G consists of 10 GPIO/Special function +*/ + +#define S3C2410_GPGCON S3C2410_GPIOREG(0x60) +#define S3C2410_GPGDAT S3C2410_GPIOREG(0x64) +#define S3C2410_GPGUP S3C2410_GPIOREG(0x68) + +#define S3C2400_GPGCON S3C2410_GPIOREG(0x44) +#define S3C2400_GPGDAT S3C2410_GPIOREG(0x48) +#define S3C2400_GPGUP S3C2410_GPIOREG(0x4C) + +#define S3C2410_GPG0 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 0) +#define S3C2410_GPG0_INP (0x00 << 0) +#define S3C2410_GPG0_OUTP (0x01 << 0) +#define S3C2410_GPG0_EINT8 (0x02 << 0) +#define S3C2400_GPG0_I2SLRCK (0x02 << 0) + +#define S3C2410_GPG1 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 1) +#define S3C2410_GPG1_INP (0x00 << 2) +#define S3C2410_GPG1_OUTP (0x01 << 2) +#define S3C2410_GPG1_EINT9 (0x02 << 2) +#define S3C2400_GPG1_I2SSCLK (0x02 << 2) + +#define S3C2410_GPG2 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 2) +#define S3C2410_GPG2_INP (0x00 << 4) +#define S3C2410_GPG2_OUTP (0x01 << 4) +#define S3C2410_GPG2_EINT10 (0x02 << 4) +#define S3C2410_GPG2_nSS0 (0x03 << 4) +#define S3C2400_GPG2_CDCLK (0x02 << 4) + +#define S3C2410_GPG3 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 3) +#define S3C2410_GPG3_INP (0x00 << 6) +#define S3C2410_GPG3_OUTP (0x01 << 6) +#define S3C2410_GPG3_EINT11 (0x02 << 6) +#define S3C2410_GPG3_nSS1 (0x03 << 6) +#define S3C2400_GPG3_I2SSDO (0x02 << 6) +#define S3C2400_GPG3_I2SSDI (0x03 << 6) + +#define S3C2410_GPG4 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 4) +#define S3C2410_GPG4_INP (0x00 << 8) +#define S3C2410_GPG4_OUTP (0x01 << 8) +#define S3C2410_GPG4_EINT12 (0x02 << 8) +#define S3C2400_GPG4_MMCCLK (0x02 << 8) +#define S3C2400_GPG4_I2SSDI (0x03 << 8) +#define S3C2410_GPG4_LCDPWREN (0x03 << 8) +#define S3C2443_GPG4_LCDPWRDN (0x03 << 8) + +#define S3C2410_GPG5 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 5) +#define S3C2410_GPG5_INP (0x00 << 10) +#define S3C2410_GPG5_OUTP (0x01 << 10) +#define S3C2410_GPG5_EINT13 (0x02 << 10) +#define S3C2400_GPG5_MMCCMD (0x02 << 10) +#define S3C2400_GPG5_IICSDA (0x03 << 10) +#define S3C2410_GPG5_SPIMISO1 (0x03 << 10) /* not s3c2443 */ + +#define S3C2410_GPG6 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 6) +#define S3C2410_GPG6_INP (0x00 << 12) +#define S3C2410_GPG6_OUTP (0x01 << 12) +#define S3C2410_GPG6_EINT14 (0x02 << 12) +#define S3C2400_GPG6_MMCDAT (0x02 << 12) +#define S3C2400_GPG6_IICSCL (0x03 << 12) +#define S3C2410_GPG6_SPIMOSI1 (0x03 << 12) + +#define S3C2410_GPG7 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 7) +#define S3C2410_GPG7_INP (0x00 << 14) +#define S3C2410_GPG7_OUTP (0x01 << 14) +#define S3C2410_GPG7_EINT15 (0x02 << 14) +#define S3C2410_GPG7_SPICLK1 (0x03 << 14) +#define S3C2400_GPG7_SPIMISO (0x02 << 14) +#define S3C2400_GPG7_IICSDA (0x03 << 14) + +#define S3C2410_GPG8 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 8) +#define S3C2410_GPG8_INP (0x00 << 16) +#define S3C2410_GPG8_OUTP (0x01 << 16) +#define S3C2410_GPG8_EINT16 (0x02 << 16) +#define S3C2400_GPG8_SPIMOSI (0x02 << 16) +#define S3C2400_GPG8_IICSCL (0x03 << 16) + +#define S3C2410_GPG9 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 9) +#define S3C2410_GPG9_INP (0x00 << 18) +#define S3C2410_GPG9_OUTP (0x01 << 18) +#define S3C2410_GPG9_EINT17 (0x02 << 18) +#define S3C2400_GPG9_SPICLK (0x02 << 18) +#define S3C2400_GPG9_MMCCLK (0x03 << 18) + +#define S3C2410_GPG10 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 10) +#define S3C2410_GPG10_INP (0x00 << 20) +#define S3C2410_GPG10_OUTP (0x01 << 20) +#define S3C2410_GPG10_EINT18 (0x02 << 20) + +#define S3C2410_GPG11 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 11) +#define S3C2410_GPG11_INP (0x00 << 22) +#define S3C2410_GPG11_OUTP (0x01 << 22) +#define S3C2410_GPG11_EINT19 (0x02 << 22) +#define S3C2410_GPG11_TCLK1 (0x03 << 22) +#define S3C2443_GPG11_CF_nIREQ (0x03 << 22) + +#define S3C2410_GPG12 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 12) +#define S3C2410_GPG12_INP (0x00 << 24) +#define S3C2410_GPG12_OUTP (0x01 << 24) +#define S3C2410_GPG12_EINT20 (0x02 << 24) +#define S3C2410_GPG12_XMON (0x03 << 24) +#define S3C2442_GPG12_nSPICS0 (0x03 << 24) +#define S3C2443_GPG12_nINPACK (0x03 << 24) + +#define S3C2410_GPG13 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 13) +#define S3C2410_GPG13_INP (0x00 << 26) +#define S3C2410_GPG13_OUTP (0x01 << 26) +#define S3C2410_GPG13_EINT21 (0x02 << 26) +#define S3C2410_GPG13_nXPON (0x03 << 26) +#define S3C2443_GPG13_CF_nREG (0x03 << 26) + +#define S3C2410_GPG14 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 14) +#define S3C2410_GPG14_INP (0x00 << 28) +#define S3C2410_GPG14_OUTP (0x01 << 28) +#define S3C2410_GPG14_EINT22 (0x02 << 28) +#define S3C2410_GPG14_YMON (0x03 << 28) +#define S3C2443_GPG14_CF_RESET (0x03 << 28) + +#define S3C2410_GPG15 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 15) +#define S3C2410_GPG15_INP (0x00 << 30) +#define S3C2410_GPG15_OUTP (0x01 << 30) +#define S3C2410_GPG15_EINT23 (0x02 << 30) +#define S3C2410_GPG15_nYPON (0x03 << 30) +#define S3C2443_GPG15_CF_PWR (0x03 << 30) + +#define S3C2410_GPG_PUPDIS(x) (1<<(x)) + +/* Port H consists of11 GPIO/serial/Misc pins + * + * GPGCON has 2 bits for each of the input pins on port F + * 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func + * + * pull up works like all other ports. +*/ + +#define S3C2410_GPHCON S3C2410_GPIOREG(0x70) +#define S3C2410_GPHDAT S3C2410_GPIOREG(0x74) +#define S3C2410_GPHUP S3C2410_GPIOREG(0x78) + +#define S3C2410_GPH0 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 0) +#define S3C2410_GPH0_INP (0x00 << 0) +#define S3C2410_GPH0_OUTP (0x01 << 0) +#define S3C2410_GPH0_nCTS0 (0x02 << 0) + +#define S3C2410_GPH1 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 1) +#define S3C2410_GPH1_INP (0x00 << 2) +#define S3C2410_GPH1_OUTP (0x01 << 2) +#define S3C2410_GPH1_nRTS0 (0x02 << 2) + +#define S3C2410_GPH2 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 2) +#define S3C2410_GPH2_INP (0x00 << 4) +#define S3C2410_GPH2_OUTP (0x01 << 4) +#define S3C2410_GPH2_TXD0 (0x02 << 4) + +#define S3C2410_GPH3 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 3) +#define S3C2410_GPH3_INP (0x00 << 6) +#define S3C2410_GPH3_OUTP (0x01 << 6) +#define S3C2410_GPH3_RXD0 (0x02 << 6) + +#define S3C2410_GPH4 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 4) +#define S3C2410_GPH4_INP (0x00 << 8) +#define S3C2410_GPH4_OUTP (0x01 << 8) +#define S3C2410_GPH4_TXD1 (0x02 << 8) + +#define S3C2410_GPH5 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 5) +#define S3C2410_GPH5_INP (0x00 << 10) +#define S3C2410_GPH5_OUTP (0x01 << 10) +#define S3C2410_GPH5_RXD1 (0x02 << 10) + +#define S3C2410_GPH6 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 6) +#define S3C2410_GPH6_INP (0x00 << 12) +#define S3C2410_GPH6_OUTP (0x01 << 12) +#define S3C2410_GPH6_TXD2 (0x02 << 12) +#define S3C2410_GPH6_nRTS1 (0x03 << 12) + +#define S3C2410_GPH7 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 7) +#define S3C2410_GPH7_INP (0x00 << 14) +#define S3C2410_GPH7_OUTP (0x01 << 14) +#define S3C2410_GPH7_RXD2 (0x02 << 14) +#define S3C2410_GPH7_nCTS1 (0x03 << 14) + +#define S3C2410_GPH8 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 8) +#define S3C2410_GPH8_INP (0x00 << 16) +#define S3C2410_GPH8_OUTP (0x01 << 16) +#define S3C2410_GPH8_UCLK (0x02 << 16) + +#define S3C2410_GPH9 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 9) +#define S3C2410_GPH9_INP (0x00 << 18) +#define S3C2410_GPH9_OUTP (0x01 << 18) +#define S3C2410_GPH9_CLKOUT0 (0x02 << 18) +#define S3C2442_GPH9_nSPICS0 (0x03 << 18) + +#define S3C2410_GPH10 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 10) +#define S3C2410_GPH10_INP (0x00 << 20) +#define S3C2410_GPH10_OUTP (0x01 << 20) +#define S3C2410_GPH10_CLKOUT1 (0x02 << 20) + +/* The S3C2412 and S3C2413 move the GPJ register set to after + * GPH, which means all registers after 0x80 are now offset by 0x10 + * for the 2412/2413 from the 2410/2440/2442 +*/ + +/* miscellaneous control */ +#define S3C2400_MISCCR S3C2410_GPIOREG(0x54) +#define S3C2410_MISCCR S3C2410_GPIOREG(0x80) +#define S3C2410_DCLKCON S3C2410_GPIOREG(0x84) + +#define S3C24XX_DCLKCON S3C24XX_GPIOREG2(0x84) + +/* see clock.h for dclk definitions */ + +/* pullup control on databus */ +#define S3C2410_MISCCR_SPUCR_HEN (0<<0) +#define S3C2410_MISCCR_SPUCR_HDIS (1<<0) +#define S3C2410_MISCCR_SPUCR_LEN (0<<1) +#define S3C2410_MISCCR_SPUCR_LDIS (1<<1) + +#define S3C2400_MISCCR_SPUCR_LEN (0<<0) +#define S3C2400_MISCCR_SPUCR_LDIS (1<<0) +#define S3C2400_MISCCR_SPUCR_HEN (0<<1) +#define S3C2400_MISCCR_SPUCR_HDIS (1<<1) + +#define S3C2400_MISCCR_HZ_STOPEN (0<<2) +#define S3C2400_MISCCR_HZ_STOPPREV (1<<2) + +#define S3C2410_MISCCR_USBDEV (0<<3) +#define S3C2410_MISCCR_USBHOST (1<<3) + +#define S3C2410_MISCCR_CLK0_MPLL (0<<4) +#define S3C2410_MISCCR_CLK0_UPLL (1<<4) +#define S3C2410_MISCCR_CLK0_FCLK (2<<4) +#define S3C2410_MISCCR_CLK0_HCLK (3<<4) +#define S3C2410_MISCCR_CLK0_PCLK (4<<4) +#define S3C2410_MISCCR_CLK0_DCLK0 (5<<4) +#define S3C2410_MISCCR_CLK0_MASK (7<<4) + +#define S3C2412_MISCCR_CLK0_RTC (2<<4) + +#define S3C2410_MISCCR_CLK1_MPLL (0<<8) +#define S3C2410_MISCCR_CLK1_UPLL (1<<8) +#define S3C2410_MISCCR_CLK1_FCLK (2<<8) +#define S3C2410_MISCCR_CLK1_HCLK (3<<8) +#define S3C2410_MISCCR_CLK1_PCLK (4<<8) +#define S3C2410_MISCCR_CLK1_DCLK1 (5<<8) +#define S3C2410_MISCCR_CLK1_MASK (7<<8) + +#define S3C2412_MISCCR_CLK1_CLKsrc (0<<8) + +#define S3C2410_MISCCR_USBSUSPND0 (1<<12) +#define S3C2410_MISCCR_USBSUSPND1 (1<<13) + +#define S3C2410_MISCCR_nRSTCON (1<<16) + +#define S3C2410_MISCCR_nEN_SCLK0 (1<<17) +#define S3C2410_MISCCR_nEN_SCLK1 (1<<18) +#define S3C2410_MISCCR_nEN_SCLKE (1<<19) /* not 2412 */ +#define S3C2410_MISCCR_SDSLEEP (7<<17) + +/* external interrupt control... */ +/* S3C2410_EXTINT0 -> irq sense control for EINT0..EINT7 + * S3C2410_EXTINT1 -> irq sense control for EINT8..EINT15 + * S3C2410_EXTINT2 -> irq sense control for EINT16..EINT23 + * + * note S3C2410_EXTINT2 has filtering options for EINT16..EINT23 + * + * Samsung datasheet p9-25 +*/ +#define S3C2400_EXTINT0 S3C2410_GPIOREG(0x58) +#define S3C2410_EXTINT0 S3C2410_GPIOREG(0x88) +#define S3C2410_EXTINT1 S3C2410_GPIOREG(0x8C) +#define S3C2410_EXTINT2 S3C2410_GPIOREG(0x90) + +#define S3C24XX_EXTINT0 S3C24XX_GPIOREG2(0x88) +#define S3C24XX_EXTINT1 S3C24XX_GPIOREG2(0x8C) +#define S3C24XX_EXTINT2 S3C24XX_GPIOREG2(0x90) + +/* values for S3C2410_EXTINT0/1/2 */ +#define S3C2410_EXTINT_LOWLEV (0x00) +#define S3C2410_EXTINT_HILEV (0x01) +#define S3C2410_EXTINT_FALLEDGE (0x02) +#define S3C2410_EXTINT_RISEEDGE (0x04) +#define S3C2410_EXTINT_BOTHEDGE (0x06) + +/* interrupt filtering conrrol for EINT16..EINT23 */ +#define S3C2410_EINFLT0 S3C2410_GPIOREG(0x94) +#define S3C2410_EINFLT1 S3C2410_GPIOREG(0x98) +#define S3C2410_EINFLT2 S3C2410_GPIOREG(0x9C) +#define S3C2410_EINFLT3 S3C2410_GPIOREG(0xA0) + +#define S3C24XX_EINFLT0 S3C24XX_GPIOREG2(0x94) +#define S3C24XX_EINFLT1 S3C24XX_GPIOREG2(0x98) +#define S3C24XX_EINFLT2 S3C24XX_GPIOREG2(0x9C) +#define S3C24XX_EINFLT3 S3C24XX_GPIOREG2(0xA0) + +/* values for interrupt filtering */ +#define S3C2410_EINTFLT_PCLK (0x00) +#define S3C2410_EINTFLT_EXTCLK (1<<7) +#define S3C2410_EINTFLT_WIDTHMSK(x) ((x) & 0x3f) + +/* removed EINTxxxx defs from here, not meant for this */ + +/* GSTATUS have miscellaneous information in them + * + * These move between s3c2410 and s3c2412 style systems. + */ + +#define S3C2410_GSTATUS0 S3C2410_GPIOREG(0x0AC) +#define S3C2410_GSTATUS1 S3C2410_GPIOREG(0x0B0) +#define S3C2410_GSTATUS2 S3C2410_GPIOREG(0x0B4) +#define S3C2410_GSTATUS3 S3C2410_GPIOREG(0x0B8) +#define S3C2410_GSTATUS4 S3C2410_GPIOREG(0x0BC) + +#define S3C2412_GSTATUS0 S3C2410_GPIOREG(0x0BC) +#define S3C2412_GSTATUS1 S3C2410_GPIOREG(0x0C0) +#define S3C2412_GSTATUS2 S3C2410_GPIOREG(0x0C4) +#define S3C2412_GSTATUS3 S3C2410_GPIOREG(0x0C8) +#define S3C2412_GSTATUS4 S3C2410_GPIOREG(0x0CC) + +#define S3C24XX_GSTATUS0 S3C24XX_GPIOREG2(0x0AC) +#define S3C24XX_GSTATUS1 S3C24XX_GPIOREG2(0x0B0) +#define S3C24XX_GSTATUS2 S3C24XX_GPIOREG2(0x0B4) +#define S3C24XX_GSTATUS3 S3C24XX_GPIOREG2(0x0B8) +#define S3C24XX_GSTATUS4 S3C24XX_GPIOREG2(0x0BC) + +#define S3C2410_GSTATUS0_nWAIT (1<<3) +#define S3C2410_GSTATUS0_NCON (1<<2) +#define S3C2410_GSTATUS0_RnB (1<<1) +#define S3C2410_GSTATUS0_nBATTFLT (1<<0) + +#define S3C2410_GSTATUS1_IDMASK (0xffff0000) +#define S3C2410_GSTATUS1_2410 (0x32410000) +#define S3C2410_GSTATUS1_2412 (0x32412001) +#define S3C2410_GSTATUS1_2440 (0x32440000) +#define S3C2410_GSTATUS1_2442 (0x32440aaa) + +#define S3C2410_GSTATUS2_WTRESET (1<<2) +#define S3C2410_GSTATUS2_OFFRESET (1<<1) +#define S3C2410_GSTATUS2_PONRESET (1<<0) + +/* open drain control register */ +#define S3C2400_OPENCR S3C2410_GPIOREG(0x50) + +#define S3C2400_OPENCR_OPC_RXD1DIS (0<<0) +#define S3C2400_OPENCR_OPC_RXD1EN (1<<0) +#define S3C2400_OPENCR_OPC_TXD1DIS (0<<1) +#define S3C2400_OPENCR_OPC_TXD1EN (1<<1) +#define S3C2400_OPENCR_OPC_CMDDIS (0<<2) +#define S3C2400_OPENCR_OPC_CMDEN (1<<2) +#define S3C2400_OPENCR_OPC_DATDIS (0<<3) +#define S3C2400_OPENCR_OPC_DATEN (1<<3) +#define S3C2400_OPENCR_OPC_MISODIS (0<<4) +#define S3C2400_OPENCR_OPC_MISOEN (1<<4) +#define S3C2400_OPENCR_OPC_MOSIDIS (0<<5) +#define S3C2400_OPENCR_OPC_MOSIEN (1<<5) + +/* 2412/2413 sleep configuration registers */ + +#define S3C2412_GPBSLPCON S3C2410_GPIOREG(0x1C) +#define S3C2412_GPCSLPCON S3C2410_GPIOREG(0x2C) +#define S3C2412_GPDSLPCON S3C2410_GPIOREG(0x3C) +#define S3C2412_GPFSLPCON S3C2410_GPIOREG(0x5C) +#define S3C2412_GPGSLPCON S3C2410_GPIOREG(0x6C) +#define S3C2412_GPHSLPCON S3C2410_GPIOREG(0x7C) + +/* definitions for each pin bit */ +#define S3C2412_GPIO_SLPCON_LOW ( 0x00 ) +#define S3C2412_GPIO_SLPCON_HIGH ( 0x01 ) +#define S3C2412_GPIO_SLPCON_IN ( 0x02 ) +#define S3C2412_GPIO_SLPCON_PULL ( 0x03 ) + +#define S3C2412_SLPCON_LOW(x) ( 0x00 << ((x) * 2)) +#define S3C2412_SLPCON_HIGH(x) ( 0x01 << ((x) * 2)) +#define S3C2412_SLPCON_IN(x) ( 0x02 << ((x) * 2)) +#define S3C2412_SLPCON_PULL(x) ( 0x03 << ((x) * 2)) +#define S3C2412_SLPCON_EINT(x) ( 0x02 << ((x) * 2)) /* only IRQ pins */ +#define S3C2412_SLPCON_MASK(x) ( 0x03 << ((x) * 2)) + +#define S3C2412_SLPCON_ALL_LOW (0x0) +#define S3C2412_SLPCON_ALL_HIGH (0x11111111 | 0x44444444) +#define S3C2412_SLPCON_ALL_IN (0x22222222 | 0x88888888) +#define S3C2412_SLPCON_ALL_PULL (0x33333333) + +#endif /* __ASM_ARCH_REGS_GPIO_H */ + diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpioj.h b/arch/arm/mach-s3c2410/include/mach/regs-gpioj.h new file mode 100644 index 000000000000..1202ca5e99f6 --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/regs-gpioj.h @@ -0,0 +1,106 @@ +/* arch/arm/mach-s3c2410/include/mach/regs-gpioj.h + * + * Copyright (c) 2004 Simtec Electronics + * http://www.simtec.co.uk/products/SWLINUX/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2440 GPIO J register definitions +*/ + + +#ifndef __ASM_ARCH_REGS_GPIOJ_H +#define __ASM_ARCH_REGS_GPIOJ_H "gpioj" + +/* Port J consists of 13 GPIO/Camera pins + * + * GPJCON has 2 bits for each of the input pins on port F + * 00 = 0 input, 1 output, 2 Camera + * + * pull up works like all other ports. +*/ + +#define S3C2440_GPIO_BANKJ (416) + +#define S3C2440_GPJCON S3C2410_GPIOREG(0xd0) +#define S3C2440_GPJDAT S3C2410_GPIOREG(0xd4) +#define S3C2440_GPJUP S3C2410_GPIOREG(0xd8) + +#define S3C2413_GPJCON S3C2410_GPIOREG(0x80) +#define S3C2413_GPJDAT S3C2410_GPIOREG(0x84) +#define S3C2413_GPJUP S3C2410_GPIOREG(0x88) +#define S3C2413_GPJSLPCON S3C2410_GPIOREG(0x8C) + +#define S3C2440_GPJ0 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 0) +#define S3C2440_GPJ0_INP (0x00 << 0) +#define S3C2440_GPJ0_OUTP (0x01 << 0) +#define S3C2440_GPJ0_CAMDATA0 (0x02 << 0) + +#define S3C2440_GPJ1 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 1) +#define S3C2440_GPJ1_INP (0x00 << 2) +#define S3C2440_GPJ1_OUTP (0x01 << 2) +#define S3C2440_GPJ1_CAMDATA1 (0x02 << 2) + +#define S3C2440_GPJ2 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 2) +#define S3C2440_GPJ2_INP (0x00 << 4) +#define S3C2440_GPJ2_OUTP (0x01 << 4) +#define S3C2440_GPJ2_CAMDATA2 (0x02 << 4) + +#define S3C2440_GPJ3 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 3) +#define S3C2440_GPJ3_INP (0x00 << 6) +#define S3C2440_GPJ3_OUTP (0x01 << 6) +#define S3C2440_GPJ3_CAMDATA3 (0x02 << 6) + +#define S3C2440_GPJ4 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 4) +#define S3C2440_GPJ4_INP (0x00 << 8) +#define S3C2440_GPJ4_OUTP (0x01 << 8) +#define S3C2440_GPJ4_CAMDATA4 (0x02 << 8) + +#define S3C2440_GPJ5 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 5) +#define S3C2440_GPJ5_INP (0x00 << 10) +#define S3C2440_GPJ5_OUTP (0x01 << 10) +#define S3C2440_GPJ5_CAMDATA5 (0x02 << 10) + +#define S3C2440_GPJ6 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 6) +#define S3C2440_GPJ6_INP (0x00 << 12) +#define S3C2440_GPJ6_OUTP (0x01 << 12) +#define S3C2440_GPJ6_CAMDATA6 (0x02 << 12) + +#define S3C2440_GPJ7 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 7) +#define S3C2440_GPJ7_INP (0x00 << 14) +#define S3C2440_GPJ7_OUTP (0x01 << 14) +#define S3C2440_GPJ7_CAMDATA7 (0x02 << 14) + +#define S3C2440_GPJ8 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 8) +#define S3C2440_GPJ8_INP (0x00 << 16) +#define S3C2440_GPJ8_OUTP (0x01 << 16) +#define S3C2440_GPJ8_CAMPCLK (0x02 << 16) + +#define S3C2440_GPJ9 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 9) +#define S3C2440_GPJ9_INP (0x00 << 18) +#define S3C2440_GPJ9_OUTP (0x01 << 18) +#define S3C2440_GPJ9_CAMVSYNC (0x02 << 18) + +#define S3C2440_GPJ10 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 10) +#define S3C2440_GPJ10_INP (0x00 << 20) +#define S3C2440_GPJ10_OUTP (0x01 << 20) +#define S3C2440_GPJ10_CAMHREF (0x02 << 20) + +#define S3C2440_GPJ11 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 11) +#define S3C2440_GPJ11_INP (0x00 << 22) +#define S3C2440_GPJ11_OUTP (0x01 << 22) +#define S3C2440_GPJ11_CAMCLKOUT (0x02 << 22) + +#define S3C2440_GPJ12 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 12) +#define S3C2440_GPJ12_INP (0x00 << 24) +#define S3C2440_GPJ12_OUTP (0x01 << 24) +#define S3C2440_GPJ12_CAMRESET (0x02 << 24) + +#define S3C2443_GPJ13 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 13) +#define S3C2443_GPJ14 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 14) +#define S3C2443_GPJ15 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 15) + +#endif /* __ASM_ARCH_REGS_GPIOJ_H */ + diff --git a/arch/arm/mach-s3c2410/include/mach/regs-irq.h b/arch/arm/mach-s3c2410/include/mach/regs-irq.h new file mode 100644 index 000000000000..b057c06d167a --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/regs-irq.h @@ -0,0 +1,43 @@ +/* arch/arm/mach-s3c2410/include/mach/regs-irq.h + * + * Copyright (c) 2003 Simtec Electronics + * http://www.simtec.co.uk/products/SWLINUX/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + + +#ifndef ___ASM_ARCH_REGS_IRQ_H +#define ___ASM_ARCH_REGS_IRQ_H "$Id: irq.h,v 1.3 2003/03/25 21:29:06 ben Exp $" + +/* interrupt controller */ + +#define S3C2410_IRQREG(x) ((x) + S3C24XX_VA_IRQ) +#define S3C2410_EINTREG(x) ((x) + S3C24XX_VA_GPIO) +#define S3C24XX_EINTREG(x) ((x) + S3C24XX_VA_GPIO2) + +#define S3C2410_SRCPND S3C2410_IRQREG(0x000) +#define S3C2410_INTMOD S3C2410_IRQREG(0x004) +#define S3C2410_INTMSK S3C2410_IRQREG(0x008) +#define S3C2410_PRIORITY S3C2410_IRQREG(0x00C) +#define S3C2410_INTPND S3C2410_IRQREG(0x010) +#define S3C2410_INTOFFSET S3C2410_IRQREG(0x014) +#define S3C2410_SUBSRCPND S3C2410_IRQREG(0x018) +#define S3C2410_INTSUBMSK S3C2410_IRQREG(0x01C) + +/* mask: 0=enable, 1=disable + * 1 bit EINT, 4=EINT4, 23=EINT23 + * EINT0,1,2,3 are not handled here. +*/ + +#define S3C2410_EINTMASK S3C2410_EINTREG(0x0A4) +#define S3C2410_EINTPEND S3C2410_EINTREG(0X0A8) +#define S3C2412_EINTMASK S3C2410_EINTREG(0x0B4) +#define S3C2412_EINTPEND S3C2410_EINTREG(0X0B8) + +#define S3C24XX_EINTMASK S3C24XX_EINTREG(0x0A4) +#define S3C24XX_EINTPEND S3C24XX_EINTREG(0X0A8) + +#endif /* ___ASM_ARCH_REGS_IRQ_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/regs-lcd.h b/arch/arm/mach-s3c2410/include/mach/regs-lcd.h new file mode 100644 index 000000000000..893b8742f954 --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/regs-lcd.h @@ -0,0 +1,162 @@ +/* arch/arm/mach-s3c2410/include/mach/regs-lcd.h + * + * Copyright (c) 2003 Simtec Electronics + * http://www.simtec.co.uk/products/SWLINUX/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + + +#ifndef ___ASM_ARCH_REGS_LCD_H +#define ___ASM_ARCH_REGS_LCD_H "$Id: lcd.h,v 1.3 2003/06/26 13:25:06 ben Exp $" + +#define S3C2410_LCDREG(x) (x) + +/* LCD control registers */ +#define S3C2410_LCDCON1 S3C2410_LCDREG(0x00) +#define S3C2410_LCDCON2 S3C2410_LCDREG(0x04) +#define S3C2410_LCDCON3 S3C2410_LCDREG(0x08) +#define S3C2410_LCDCON4 S3C2410_LCDREG(0x0C) +#define S3C2410_LCDCON5 S3C2410_LCDREG(0x10) + +#define S3C2410_LCDCON1_CLKVAL(x) ((x) << 8) +#define S3C2410_LCDCON1_MMODE (1<<7) +#define S3C2410_LCDCON1_DSCAN4 (0<<5) +#define S3C2410_LCDCON1_STN4 (1<<5) +#define S3C2410_LCDCON1_STN8 (2<<5) +#define S3C2410_LCDCON1_TFT (3<<5) + +#define S3C2410_LCDCON1_STN1BPP (0<<1) +#define S3C2410_LCDCON1_STN2GREY (1<<1) +#define S3C2410_LCDCON1_STN4GREY (2<<1) +#define S3C2410_LCDCON1_STN8BPP (3<<1) +#define S3C2410_LCDCON1_STN12BPP (4<<1) + +#define S3C2410_LCDCON1_TFT1BPP (8<<1) +#define S3C2410_LCDCON1_TFT2BPP (9<<1) +#define S3C2410_LCDCON1_TFT4BPP (10<<1) +#define S3C2410_LCDCON1_TFT8BPP (11<<1) +#define S3C2410_LCDCON1_TFT16BPP (12<<1) +#define S3C2410_LCDCON1_TFT24BPP (13<<1) + +#define S3C2410_LCDCON1_ENVID (1) + +#define S3C2410_LCDCON1_MODEMASK 0x1E + +#define S3C2410_LCDCON2_VBPD(x) ((x) << 24) +#define S3C2410_LCDCON2_LINEVAL(x) ((x) << 14) +#define S3C2410_LCDCON2_VFPD(x) ((x) << 6) +#define S3C2410_LCDCON2_VSPW(x) ((x) << 0) + +#define S3C2410_LCDCON2_GET_VBPD(x) ( ((x) >> 24) & 0xFF) +#define S3C2410_LCDCON2_GET_VFPD(x) ( ((x) >> 6) & 0xFF) +#define S3C2410_LCDCON2_GET_VSPW(x) ( ((x) >> 0) & 0x3F) + +#define S3C2410_LCDCON3_HBPD(x) ((x) << 19) +#define S3C2410_LCDCON3_WDLY(x) ((x) << 19) +#define S3C2410_LCDCON3_HOZVAL(x) ((x) << 8) +#define S3C2410_LCDCON3_HFPD(x) ((x) << 0) +#define S3C2410_LCDCON3_LINEBLANK(x)((x) << 0) + +#define S3C2410_LCDCON3_GET_HBPD(x) ( ((x) >> 19) & 0x7F) +#define S3C2410_LCDCON3_GET_HFPD(x) ( ((x) >> 0) & 0xFF) + +/* LDCCON4 changes for STN mode on the S3C2412 */ + +#define S3C2410_LCDCON4_MVAL(x) ((x) << 8) +#define S3C2410_LCDCON4_HSPW(x) ((x) << 0) +#define S3C2410_LCDCON4_WLH(x) ((x) << 0) + +#define S3C2410_LCDCON4_GET_HSPW(x) ( ((x) >> 0) & 0xFF) + +#define S3C2410_LCDCON5_BPP24BL (1<<12) +#define S3C2410_LCDCON5_FRM565 (1<<11) +#define S3C2410_LCDCON5_INVVCLK (1<<10) +#define S3C2410_LCDCON5_INVVLINE (1<<9) +#define S3C2410_LCDCON5_INVVFRAME (1<<8) +#define S3C2410_LCDCON5_INVVD (1<<7) +#define S3C2410_LCDCON5_INVVDEN (1<<6) +#define S3C2410_LCDCON5_INVPWREN (1<<5) +#define S3C2410_LCDCON5_INVLEND (1<<4) +#define S3C2410_LCDCON5_PWREN (1<<3) +#define S3C2410_LCDCON5_ENLEND (1<<2) +#define S3C2410_LCDCON5_BSWP (1<<1) +#define S3C2410_LCDCON5_HWSWP (1<<0) + +/* framebuffer start addressed */ +#define S3C2410_LCDSADDR1 S3C2410_LCDREG(0x14) +#define S3C2410_LCDSADDR2 S3C2410_LCDREG(0x18) +#define S3C2410_LCDSADDR3 S3C2410_LCDREG(0x1C) + +#define S3C2410_LCDBANK(x) ((x) << 21) +#define S3C2410_LCDBASEU(x) (x) + +#define S3C2410_OFFSIZE(x) ((x) << 11) +#define S3C2410_PAGEWIDTH(x) (x) + +/* colour lookup and miscellaneous controls */ + +#define S3C2410_REDLUT S3C2410_LCDREG(0x20) +#define S3C2410_GREENLUT S3C2410_LCDREG(0x24) +#define S3C2410_BLUELUT S3C2410_LCDREG(0x28) + +#define S3C2410_DITHMODE S3C2410_LCDREG(0x4C) +#define S3C2410_TPAL S3C2410_LCDREG(0x50) + +#define S3C2410_TPAL_EN (1<<24) + +/* interrupt info */ +#define S3C2410_LCDINTPND S3C2410_LCDREG(0x54) +#define S3C2410_LCDSRCPND S3C2410_LCDREG(0x58) +#define S3C2410_LCDINTMSK S3C2410_LCDREG(0x5C) +#define S3C2410_LCDINT_FIWSEL (1<<2) +#define S3C2410_LCDINT_FRSYNC (1<<1) +#define S3C2410_LCDINT_FICNT (1<<0) + +/* s3c2442 extra stn registers */ + +#define S3C2442_REDLUT S3C2410_LCDREG(0x20) +#define S3C2442_GREENLUT S3C2410_LCDREG(0x24) +#define S3C2442_BLUELUT S3C2410_LCDREG(0x28) +#define S3C2442_DITHMODE S3C2410_LCDREG(0x20) + +#define S3C2410_LPCSEL S3C2410_LCDREG(0x60) + +#define S3C2410_TFTPAL(x) S3C2410_LCDREG((0x400 + (x)*4)) + +/* S3C2412 registers */ + +#define S3C2412_TPAL S3C2410_LCDREG(0x20) + +#define S3C2412_LCDINTPND S3C2410_LCDREG(0x24) +#define S3C2412_LCDSRCPND S3C2410_LCDREG(0x28) +#define S3C2412_LCDINTMSK S3C2410_LCDREG(0x2C) + +#define S3C2412_TCONSEL S3C2410_LCDREG(0x30) + +#define S3C2412_LCDCON6 S3C2410_LCDREG(0x34) +#define S3C2412_LCDCON7 S3C2410_LCDREG(0x38) +#define S3C2412_LCDCON8 S3C2410_LCDREG(0x3C) +#define S3C2412_LCDCON9 S3C2410_LCDREG(0x40) + +#define S3C2412_REDLUT(x) S3C2410_LCDREG(0x44 + ((x)*4)) +#define S3C2412_GREENLUT(x) S3C2410_LCDREG(0x60 + ((x)*4)) +#define S3C2412_BLUELUT(x) S3C2410_LCDREG(0x98 + ((x)*4)) + +#define S3C2412_FRCPAT(x) S3C2410_LCDREG(0xB4 + ((x)*4)) + +/* general registers */ + +/* base of the LCD registers, where INTPND, INTSRC and then INTMSK + * are available. */ + +#define S3C2410_LCDINTBASE S3C2410_LCDREG(0x54) +#define S3C2412_LCDINTBASE S3C2410_LCDREG(0x24) + +#define S3C24XX_LCDINTPND (0x00) +#define S3C24XX_LCDSRCPND (0x04) +#define S3C24XX_LCDINTMSK (0x08) + +#endif /* ___ASM_ARCH_REGS_LCD_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/regs-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-mem.h new file mode 100644 index 000000000000..f9926abd5cde --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/regs-mem.h @@ -0,0 +1,220 @@ +/* arch/arm/mach-s3c2410/include/mach/regs-mem.h + * + * Copyright (c) 2004 Simtec Electronics + * http://www.simtec.co.uk/products/SWLINUX/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2410 Memory Control register definitions +*/ + +#ifndef __ASM_ARM_MEMREGS_H +#define __ASM_ARM_MEMREGS_H "$Id: regs.h,v 1.8 2003/05/01 15:55:41 ben Exp $" + +#ifndef S3C2410_MEMREG +#define S3C2410_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x)) +#endif + +/* bus width, and wait state control */ +#define S3C2410_BWSCON S3C2410_MEMREG(0x0000) + +/* bank zero config - note, pinstrapped from OM pins! */ +#define S3C2410_BWSCON_DW0_16 (1<<1) +#define S3C2410_BWSCON_DW0_32 (2<<1) + +/* bank one configs */ +#define S3C2410_BWSCON_DW1_8 (0<<4) +#define S3C2410_BWSCON_DW1_16 (1<<4) +#define S3C2410_BWSCON_DW1_32 (2<<4) +#define S3C2410_BWSCON_WS1 (1<<6) +#define S3C2410_BWSCON_ST1 (1<<7) + +/* bank 2 configurations */ +#define S3C2410_BWSCON_DW2_8 (0<<8) +#define S3C2410_BWSCON_DW2_16 (1<<8) +#define S3C2410_BWSCON_DW2_32 (2<<8) +#define S3C2410_BWSCON_WS2 (1<<10) +#define S3C2410_BWSCON_ST2 (1<<11) + +/* bank 3 configurations */ +#define S3C2410_BWSCON_DW3_8 (0<<12) +#define S3C2410_BWSCON_DW3_16 (1<<12) +#define S3C2410_BWSCON_DW3_32 (2<<12) +#define S3C2410_BWSCON_WS3 (1<<14) +#define S3C2410_BWSCON_ST3 (1<<15) + +/* bank 4 configurations */ +#define S3C2410_BWSCON_DW4_8 (0<<16) +#define S3C2410_BWSCON_DW4_16 (1<<16) +#define S3C2410_BWSCON_DW4_32 (2<<16) +#define S3C2410_BWSCON_WS4 (1<<18) +#define S3C2410_BWSCON_ST4 (1<<19) + +/* bank 5 configurations */ +#define S3C2410_BWSCON_DW5_8 (0<<20) +#define S3C2410_BWSCON_DW5_16 (1<<20) +#define S3C2410_BWSCON_DW5_32 (2<<20) +#define S3C2410_BWSCON_WS5 (1<<22) +#define S3C2410_BWSCON_ST5 (1<<23) + +/* bank 6 configurations */ +#define S3C2410_BWSCON_DW6_8 (0<<24) +#define S3C2410_BWSCON_DW6_16 (1<<24) +#define S3C2410_BWSCON_DW6_32 (2<<24) +#define S3C2410_BWSCON_WS6 (1<<26) +#define S3C2410_BWSCON_ST6 (1<<27) + +/* bank 7 configurations */ +#define S3C2410_BWSCON_DW7_8 (0<<28) +#define S3C2410_BWSCON_DW7_16 (1<<28) +#define S3C2410_BWSCON_DW7_32 (2<<28) +#define S3C2410_BWSCON_WS7 (1<<30) +#define S3C2410_BWSCON_ST7 (1<<31) + +/* memory set (rom, ram) */ +#define S3C2410_BANKCON0 S3C2410_MEMREG(0x0004) +#define S3C2410_BANKCON1 S3C2410_MEMREG(0x0008) +#define S3C2410_BANKCON2 S3C2410_MEMREG(0x000C) +#define S3C2410_BANKCON3 S3C2410_MEMREG(0x0010) +#define S3C2410_BANKCON4 S3C2410_MEMREG(0x0014) +#define S3C2410_BANKCON5 S3C2410_MEMREG(0x0018) +#define S3C2410_BANKCON6 S3C2410_MEMREG(0x001C) +#define S3C2410_BANKCON7 S3C2410_MEMREG(0x0020) + +/* bank configuration registers */ + +#define S3C2410_BANKCON_PMCnorm (0x00) +#define S3C2410_BANKCON_PMC4 (0x01) +#define S3C2410_BANKCON_PMC8 (0x02) +#define S3C2410_BANKCON_PMC16 (0x03) + +/* bank configurations for banks 0..7, note banks + * 6 and 7 have differnt configurations depending on + * the memory type bits */ + +#define S3C2410_BANKCON_Tacp2 (0x0 << 2) +#define S3C2410_BANKCON_Tacp3 (0x1 << 2) +#define S3C2410_BANKCON_Tacp4 (0x2 << 2) +#define S3C2410_BANKCON_Tacp6 (0x3 << 2) +#define S3C2410_BANKCON_Tacp_SHIFT (2) + +#define S3C2410_BANKCON_Tcah0 (0x0 << 4) +#define S3C2410_BANKCON_Tcah1 (0x1 << 4) +#define S3C2410_BANKCON_Tcah2 (0x2 << 4) +#define S3C2410_BANKCON_Tcah4 (0x3 << 4) +#define S3C2410_BANKCON_Tcah_SHIFT (4) + +#define S3C2410_BANKCON_Tcoh0 (0x0 << 6) +#define S3C2410_BANKCON_Tcoh1 (0x1 << 6) +#define S3C2410_BANKCON_Tcoh2 (0x2 << 6) +#define S3C2410_BANKCON_Tcoh4 (0x3 << 6) +#define S3C2410_BANKCON_Tcoh_SHIFT (6) + +#define S3C2410_BANKCON_Tacc1 (0x0 << 8) +#define S3C2410_BANKCON_Tacc2 (0x1 << 8) +#define S3C2410_BANKCON_Tacc3 (0x2 << 8) +#define S3C2410_BANKCON_Tacc4 (0x3 << 8) +#define S3C2410_BANKCON_Tacc6 (0x4 << 8) +#define S3C2410_BANKCON_Tacc8 (0x5 << 8) +#define S3C2410_BANKCON_Tacc10 (0x6 << 8) +#define S3C2410_BANKCON_Tacc14 (0x7 << 8) +#define S3C2410_BANKCON_Tacc_SHIFT (8) + +#define S3C2410_BANKCON_Tcos0 (0x0 << 11) +#define S3C2410_BANKCON_Tcos1 (0x1 << 11) +#define S3C2410_BANKCON_Tcos2 (0x2 << 11) +#define S3C2410_BANKCON_Tcos4 (0x3 << 11) +#define S3C2410_BANKCON_Tcos_SHIFT (11) + +#define S3C2410_BANKCON_Tacs0 (0x0 << 13) +#define S3C2410_BANKCON_Tacs1 (0x1 << 13) +#define S3C2410_BANKCON_Tacs2 (0x2 << 13) +#define S3C2410_BANKCON_Tacs4 (0x3 << 13) +#define S3C2410_BANKCON_Tacs_SHIFT (13) + +#define S3C2410_BANKCON_SRAM (0x0 << 15) +#define S3C2400_BANKCON_EDODRAM (0x2 << 15) +#define S3C2410_BANKCON_SDRAM (0x3 << 15) + +/* next bits only for EDO DRAM in 6,7 */ +#define S3C2400_BANKCON_EDO_Trcd1 (0x00 << 4) +#define S3C2400_BANKCON_EDO_Trcd2 (0x01 << 4) +#define S3C2400_BANKCON_EDO_Trcd3 (0x02 << 4) +#define S3C2400_BANKCON_EDO_Trcd4 (0x03 << 4) + +/* CAS pulse width */ +#define S3C2400_BANKCON_EDO_PULSE1 (0x00 << 3) +#define S3C2400_BANKCON_EDO_PULSE2 (0x01 << 3) + +/* CAS pre-charge */ +#define S3C2400_BANKCON_EDO_TCP1 (0x00 << 2) +#define S3C2400_BANKCON_EDO_TCP2 (0x01 << 2) + +/* control column address select */ +#define S3C2400_BANKCON_EDO_SCANb8 (0x00 << 0) +#define S3C2400_BANKCON_EDO_SCANb9 (0x01 << 0) +#define S3C2400_BANKCON_EDO_SCANb10 (0x02 << 0) +#define S3C2400_BANKCON_EDO_SCANb11 (0x03 << 0) + +/* next bits only for SDRAM in 6,7 */ +#define S3C2410_BANKCON_Trcd2 (0x00 << 2) +#define S3C2410_BANKCON_Trcd3 (0x01 << 2) +#define S3C2410_BANKCON_Trcd4 (0x02 << 2) + +/* control column address select */ +#define S3C2410_BANKCON_SCANb8 (0x00 << 0) +#define S3C2410_BANKCON_SCANb9 (0x01 << 0) +#define S3C2410_BANKCON_SCANb10 (0x02 << 0) + +#define S3C2410_REFRESH S3C2410_MEMREG(0x0024) +#define S3C2410_BANKSIZE S3C2410_MEMREG(0x0028) +#define S3C2410_MRSRB6 S3C2410_MEMREG(0x002C) +#define S3C2410_MRSRB7 S3C2410_MEMREG(0x0030) + +/* refresh control */ + +#define S3C2410_REFRESH_REFEN (1<<23) +#define S3C2410_REFRESH_SELF (1<<22) +#define S3C2410_REFRESH_REFCOUNTER ((1<<11)-1) + +#define S3C2410_REFRESH_TRP_MASK (3<<20) +#define S3C2410_REFRESH_TRP_2clk (0<<20) +#define S3C2410_REFRESH_TRP_3clk (1<<20) +#define S3C2410_REFRESH_TRP_4clk (2<<20) + +#define S3C2400_REFRESH_DRAM_TRP_MASK (3<<20) +#define S3C2400_REFRESH_DRAM_TRP_1_5clk (0<<20) +#define S3C2400_REFRESH_DRAM_TRP_2_5clk (1<<20) +#define S3C2400_REFRESH_DRAM_TRP_3_5clk (2<<20) +#define S3C2400_REFRESH_DRAM_TRP_4_5clk (3<<20) + +#define S3C2410_REFRESH_TSRC_MASK (3<<18) +#define S3C2410_REFRESH_TSRC_4clk (0<<18) +#define S3C2410_REFRESH_TSRC_5clk (1<<18) +#define S3C2410_REFRESH_TSRC_6clk (2<<18) +#define S3C2410_REFRESH_TSRC_7clk (3<<18) + + +/* mode select register(s) */ + +#define S3C2410_MRSRB_CL1 (0x00 << 4) +#define S3C2410_MRSRB_CL2 (0x02 << 4) +#define S3C2410_MRSRB_CL3 (0x03 << 4) + +/* bank size register */ +#define S3C2410_BANKSIZE_128M (0x2 << 0) +#define S3C2410_BANKSIZE_64M (0x1 << 0) +#define S3C2410_BANKSIZE_32M (0x0 << 0) +#define S3C2410_BANKSIZE_16M (0x7 << 0) +#define S3C2410_BANKSIZE_8M (0x6 << 0) +#define S3C2410_BANKSIZE_4M (0x5 << 0) +#define S3C2410_BANKSIZE_2M (0x4 << 0) +#define S3C2410_BANKSIZE_MASK (0x7 << 0) +#define S3C2400_BANKSIZE_MASK (0x4 << 0) +#define S3C2410_BANKSIZE_SCLK_EN (1<<4) +#define S3C2410_BANKSIZE_SCKE_EN (1<<5) +#define S3C2410_BANKSIZE_BURST (1<<7) + +#endif /* __ASM_ARM_MEMREGS_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/regs-power.h b/arch/arm/mach-s3c2410/include/mach/regs-power.h new file mode 100644 index 000000000000..2d36353f57d7 --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/regs-power.h @@ -0,0 +1,40 @@ +/* arch/arm/mach-s3c2410/include/mach/regs-power.h + * + * Copyright (c) 2003,2004,2005,2006 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C24XX power control register definitions +*/ + +#ifndef __ASM_ARM_REGS_PWR +#define __ASM_ARM_REGS_PWR __FILE__ + +#define S3C24XX_PWRREG(x) ((x) + S3C24XX_VA_CLKPWR) + +#define S3C2412_PWRMODECON S3C24XX_PWRREG(0x20) +#define S3C2412_PWRCFG S3C24XX_PWRREG(0x24) + +#define S3C2412_INFORM0 S3C24XX_PWRREG(0x70) +#define S3C2412_INFORM1 S3C24XX_PWRREG(0x74) +#define S3C2412_INFORM2 S3C24XX_PWRREG(0x78) +#define S3C2412_INFORM3 S3C24XX_PWRREG(0x7C) + +#define S3C2412_PWRCFG_BATF_IRQ (1<<0) +#define S3C2412_PWRCFG_BATF_IGNORE (2<<0) +#define S3C2412_PWRCFG_BATF_SLEEP (3<<0) +#define S3C2412_PWRCFG_BATF_MASK (3<<0) + +#define S3C2412_PWRCFG_STANDBYWFI_IGNORE (0<<6) +#define S3C2412_PWRCFG_STANDBYWFI_IDLE (1<<6) +#define S3C2412_PWRCFG_STANDBYWFI_STOP (2<<6) +#define S3C2412_PWRCFG_STANDBYWFI_SLEEP (3<<6) +#define S3C2412_PWRCFG_STANDBYWFI_MASK (3<<6) + +#define S3C2412_PWRCFG_RTC_MASKIRQ (1<<8) +#define S3C2412_PWRCFG_NAND_NORST (1<<9) + +#endif /* __ASM_ARM_REGS_PWR */ diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h new file mode 100644 index 000000000000..a4bf27123170 --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h @@ -0,0 +1,29 @@ +/* arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h + * + * Copyright (c) 2008 Simtec Electronics + * Ben Dooks + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2412 memory register definitions +*/ + +#ifndef __ASM_ARM_REGS_S3C2412_MEM +#define __ASM_ARM_REGS_S3C2412_MEM + +#ifndef S3C2412_MEMREG +#define S3C2412_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x)) +#endif + +#define S3C2412_BANKCFG S3C2412_MEMREG(0x00) +#define S3C2412_BANKCON1 S3C2412_MEMREG(0x04) +#define S3C2412_BANKCON2 S3C2412_MEMREG(0x08) +#define S3C2412_BANKCON3 S3C2412_MEMREG(0x0C) + +#define S3C2412_REFRESH S3C2412_MEMREG(0x10) +#define S3C2412_TIMEOUT S3C2412_MEMREG(0x14) + +#endif /* __ASM_ARM_REGS_S3C2412_MEM */ diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2412.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2412.h new file mode 100644 index 000000000000..aa69dc79bc38 --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2412.h @@ -0,0 +1,23 @@ +/* arch/arm/mach-s3c2410/include/mach/regs-s3c2412.h + * + * Copyright 2007 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2412 specific register definitions +*/ + +#ifndef __ASM_ARCH_REGS_S3C2412_H +#define __ASM_ARCH_REGS_S3C2412_H "s3c2412" + +#define S3C2412_SWRST (S3C24XX_VA_CLKPWR + 0x30) +#define S3C2412_SWRST_RESET (0x533C2412) + +/* see regs-power.h for the other registers in the power block. */ + +#endif /* __ASM_ARCH_REGS_S3C2412_H */ + diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h new file mode 100644 index 000000000000..7dd458363a51 --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h @@ -0,0 +1,195 @@ +/* arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h + * + * Copyright (c) 2007 Simtec Electronics + * Ben Dooks + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2443 clock register definitions +*/ + +#ifndef __ASM_ARM_REGS_S3C2443_CLOCK +#define __ASM_ARM_REGS_S3C2443_CLOCK + +#define S3C2443_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR) + +#define S3C2443_PLLCON_MDIVSHIFT 16 +#define S3C2443_PLLCON_PDIVSHIFT 8 +#define S3C2443_PLLCON_SDIVSHIFT 0 +#define S3C2443_PLLCON_MDIVMASK ((1<<(1+(23-16)))-1) +#define S3C2443_PLLCON_PDIVMASK ((1<<(1+(9-8)))-1) +#define S3C2443_PLLCON_SDIVMASK (3) + +#define S3C2443_MPLLCON S3C2443_CLKREG(0x10) +#define S3C2443_EPLLCON S3C2443_CLKREG(0x18) +#define S3C2443_CLKSRC S3C2443_CLKREG(0x20) +#define S3C2443_CLKDIV0 S3C2443_CLKREG(0x24) +#define S3C2443_CLKDIV1 S3C2443_CLKREG(0x28) +#define S3C2443_HCLKCON S3C2443_CLKREG(0x30) +#define S3C2443_PCLKCON S3C2443_CLKREG(0x34) +#define S3C2443_SCLKCON S3C2443_CLKREG(0x38) +#define S3C2443_PWRMODE S3C2443_CLKREG(0x40) +#define S3C2443_SWRST S3C2443_CLKREG(0x44) +#define S3C2443_BUSPRI0 S3C2443_CLKREG(0x50) +#define S3C2443_SYSID S3C2443_CLKREG(0x5C) +#define S3C2443_PWRCFG S3C2443_CLKREG(0x60) +#define S3C2443_RSTCON S3C2443_CLKREG(0x64) + +#define S3C2443_SWRST_RESET (0x533c2443) + +#define S3C2443_PLLCON_OFF (1<<24) + +#define S3C2443_CLKSRC_I2S_EXT (1<<14) +#define S3C2443_CLKSRC_I2S_EPLLDIV (0<<14) +#define S3C2443_CLKSRC_I2S_EPLLREF (2<<14) +#define S3C2443_CLKSRC_I2S_EPLLREF3 (3<<14) +#define S3C2443_CLKSRC_I2S_MASK (3<<14) + +#define S3C2443_CLKSRC_EPLLREF_XTAL (2<<8) +#define S3C2443_CLKSRC_EPLLREF_EXTCLK (3<<8) +#define S3C2443_CLKSRC_EPLLREF_MPLLREF (0<<8) +#define S3C2443_CLKSRC_EPLLREF_MPLLREF2 (1<<8) +#define S3C2443_CLKSRC_EPLLREF_MASK (3<<8) + +#define S3C2443_CLKSRC_ESYSCLK_EPLL (1<<6) +#define S3C2443_CLKSRC_MSYSCLK_MPLL (1<<4) +#define S3C2443_CLKSRC_EXTCLK_DIV (1<<3) + +#define S3C2443_CLKDIV0_DVS (1<<13) +#define S3C2443_CLKDIV0_HALF_HCLK (1<<3) +#define S3C2443_CLKDIV0_HALF_PCLK (1<<2) + +#define S3C2443_CLKDIV0_HCLKDIV_MASK (3<<0) + +#define S3C2443_CLKDIV0_EXTDIV_MASK (3<<6) +#define S3C2443_CLKDIV0_EXTDIV_SHIFT (6) + +#define S3C2443_CLKDIV0_PREDIV_MASK (3<<4) +#define S3C2443_CLKDIV0_PREDIV_SHIFT (4) + +#define S3C2443_CLKDIV0_ARMDIV_MASK (15<<9) +#define S3C2443_CLKDIV0_ARMDIV_SHIFT (9) +#define S3C2443_CLKDIV0_ARMDIV_1 (0<<9) +#define S3C2443_CLKDIV0_ARMDIV_2 (8<<9) +#define S3C2443_CLKDIV0_ARMDIV_3 (2<<9) +#define S3C2443_CLKDIV0_ARMDIV_4 (9<<9) +#define S3C2443_CLKDIV0_ARMDIV_6 (10<<9) +#define S3C2443_CLKDIV0_ARMDIV_8 (11<<9) +#define S3C2443_CLKDIV0_ARMDIV_12 (13<<9) +#define S3C2443_CLKDIV0_ARMDIV_16 (15<<9) + +/* S3C2443_CLKDIV1 */ + +#define S3C2443_CLKDIV1_CAMDIV_MASK (15<<26) +#define S3C2443_CLKDIV1_CAMDIV_SHIFT (26) + +#define S3C2443_CLKDIV1_HSSPIDIV_MASK (3<<24) +#define S3C2443_CLKDIV1_HSSPIDIV_SHIFT (24) + +#define S3C2443_CLKDIV1_DISPDIV_MASK (0xff<<16) +#define S3C2443_CLKDIV1_DISPDIV_SHIFT (16) + +#define S3C2443_CLKDIV1_I2SDIV_MASK (15<<12) +#define S3C2443_CLKDIV1_I2SDIV_SHIFT (12) + +#define S3C2443_CLKDIV1_UARTDIV_MASK (15<<8) +#define S3C2443_CLKDIV1_UARTDIV_SHIFT (8) + +#define S3C2443_CLKDIV1_HSMMCDIV_MASK (3<<6) +#define S3C2443_CLKDIV1_HSMMCDIV_SHIFT (6) + +#define S3C2443_CLKDIV1_USBHOSTDIV_MASK (3<<4) +#define S3C2443_CLKDIV1_USBHOSTDIV_SHIFT (4) + +#define S3C2443_CLKCON_NAND + +#define S3C2443_HCLKCON_DMA0 (1<<0) +#define S3C2443_HCLKCON_DMA1 (1<<1) +#define S3C2443_HCLKCON_DMA2 (1<<2) +#define S3C2443_HCLKCON_DMA3 (1<<3) +#define S3C2443_HCLKCON_DMA4 (1<<4) +#define S3C2443_HCLKCON_DMA5 (1<<5) +#define S3C2443_HCLKCON_CAMIF (1<<8) +#define S3C2443_HCLKCON_DISP (1<<9) +#define S3C2443_HCLKCON_LCDC (1<<10) +#define S3C2443_HCLKCON_USBH (1<<11) +#define S3C2443_HCLKCON_USBD (1<<12) +#define S3C2443_HCLKCON_HSMMC (1<<16) +#define S3C2443_HCLKCON_CFC (1<<17) +#define S3C2443_HCLKCON_SSMC (1<<18) +#define S3C2443_HCLKCON_DRAMC (1<<19) + +#define S3C2443_PCLKCON_UART0 (1<<0) +#define S3C2443_PCLKCON_UART1 (1<<1) +#define S3C2443_PCLKCON_UART2 (1<<2) +#define S3C2443_PCLKCON_UART3 (1<<3) +#define S3C2443_PCLKCON_IIC (1<<4) +#define S3C2443_PCLKCON_SDI (1<<5) +#define S3C2443_PCLKCON_ADC (1<<7) +#define S3C2443_PCLKCON_AC97 (1<<8) +#define S3C2443_PCLKCON_IIS (1<<9) +#define S3C2443_PCLKCON_PWMT (1<<10) +#define S3C2443_PCLKCON_WDT (1<<11) +#define S3C2443_PCLKCON_RTC (1<<12) +#define S3C2443_PCLKCON_GPIO (1<<13) +#define S3C2443_PCLKCON_SPI0 (1<<14) +#define S3C2443_PCLKCON_SPI1 (1<<15) + +#define S3C2443_SCLKCON_DDRCLK (1<<16) +#define S3C2443_SCLKCON_SSMCCLK (1<<15) +#define S3C2443_SCLKCON_HSSPICLK (1<<14) +#define S3C2443_SCLKCON_HSMMCCLK_EXT (1<<13) +#define S3C2443_SCLKCON_HSMMCCLK_EPLL (1<<12) +#define S3C2443_SCLKCON_CAMCLK (1<<11) +#define S3C2443_SCLKCON_DISPCLK (1<<10) +#define S3C2443_SCLKCON_I2SCLK (1<<9) +#define S3C2443_SCLKCON_UARTCLK (1<<8) +#define S3C2443_SCLKCON_USBHOST (1<<1) + +#include + +static inline unsigned int +s3c2443_get_mpll(unsigned int pllval, unsigned int baseclk) +{ + unsigned int mdiv, pdiv, sdiv; + uint64_t fvco; + + mdiv = pllval >> S3C2443_PLLCON_MDIVSHIFT; + pdiv = pllval >> S3C2443_PLLCON_PDIVSHIFT; + sdiv = pllval >> S3C2443_PLLCON_SDIVSHIFT; + + mdiv &= S3C2443_PLLCON_MDIVMASK; + pdiv &= S3C2443_PLLCON_PDIVMASK; + sdiv &= S3C2443_PLLCON_SDIVMASK; + + fvco = (uint64_t)baseclk * (2 * (mdiv + 8)); + do_div(fvco, pdiv << sdiv); + + return (unsigned int)fvco; +} + +static inline unsigned int +s3c2443_get_epll(unsigned int pllval, unsigned int baseclk) +{ + unsigned int mdiv, pdiv, sdiv; + uint64_t fvco; + + mdiv = pllval >> S3C2443_PLLCON_MDIVSHIFT; + pdiv = pllval >> S3C2443_PLLCON_PDIVSHIFT; + sdiv = pllval >> S3C2443_PLLCON_SDIVSHIFT; + + mdiv &= S3C2443_PLLCON_MDIVMASK; + pdiv &= S3C2443_PLLCON_PDIVMASK; + sdiv &= S3C2443_PLLCON_SDIVMASK; + + fvco = (uint64_t)baseclk * (mdiv + 8); + do_div(fvco, (pdiv + 2) << sdiv); + + return (unsigned int)fvco; +} + +#endif /* __ASM_ARM_REGS_S3C2443_CLOCK */ + diff --git a/arch/arm/mach-s3c2410/include/mach/regs-sdi.h b/arch/arm/mach-s3c2410/include/mach/regs-sdi.h new file mode 100644 index 000000000000..cbf2d8884e30 --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/regs-sdi.h @@ -0,0 +1,127 @@ +/* arch/arm/mach-s3c2410/include/mach/regs-sdi.h + * + * Copyright (c) 2004 Simtec Electronics + * http://www.simtec.co.uk/products/SWLINUX/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2410 MMC/SDIO register definitions +*/ + +#ifndef __ASM_ARM_REGS_SDI +#define __ASM_ARM_REGS_SDI "regs-sdi.h" + +#define S3C2410_SDICON (0x00) +#define S3C2410_SDIPRE (0x04) +#define S3C2410_SDICMDARG (0x08) +#define S3C2410_SDICMDCON (0x0C) +#define S3C2410_SDICMDSTAT (0x10) +#define S3C2410_SDIRSP0 (0x14) +#define S3C2410_SDIRSP1 (0x18) +#define S3C2410_SDIRSP2 (0x1C) +#define S3C2410_SDIRSP3 (0x20) +#define S3C2410_SDITIMER (0x24) +#define S3C2410_SDIBSIZE (0x28) +#define S3C2410_SDIDCON (0x2C) +#define S3C2410_SDIDCNT (0x30) +#define S3C2410_SDIDSTA (0x34) +#define S3C2410_SDIFSTA (0x38) + +#define S3C2410_SDIDATA (0x3C) +#define S3C2410_SDIIMSK (0x40) + +#define S3C2440_SDIDATA (0x40) +#define S3C2440_SDIIMSK (0x3C) + +#define S3C2440_SDICON_SDRESET (1<<8) +#define S3C2440_SDICON_MMCCLOCK (1<<5) +#define S3C2410_SDICON_BYTEORDER (1<<4) +#define S3C2410_SDICON_SDIOIRQ (1<<3) +#define S3C2410_SDICON_RWAITEN (1<<2) +#define S3C2410_SDICON_FIFORESET (1<<1) +#define S3C2410_SDICON_CLOCKTYPE (1<<0) + +#define S3C2410_SDICMDCON_ABORT (1<<12) +#define S3C2410_SDICMDCON_WITHDATA (1<<11) +#define S3C2410_SDICMDCON_LONGRSP (1<<10) +#define S3C2410_SDICMDCON_WAITRSP (1<<9) +#define S3C2410_SDICMDCON_CMDSTART (1<<8) +#define S3C2410_SDICMDCON_SENDERHOST (1<<6) +#define S3C2410_SDICMDCON_INDEX (0x3f) + +#define S3C2410_SDICMDSTAT_CRCFAIL (1<<12) +#define S3C2410_SDICMDSTAT_CMDSENT (1<<11) +#define S3C2410_SDICMDSTAT_CMDTIMEOUT (1<<10) +#define S3C2410_SDICMDSTAT_RSPFIN (1<<9) +#define S3C2410_SDICMDSTAT_XFERING (1<<8) +#define S3C2410_SDICMDSTAT_INDEX (0xff) + +#define S3C2440_SDIDCON_DS_BYTE (0<<22) +#define S3C2440_SDIDCON_DS_HALFWORD (1<<22) +#define S3C2440_SDIDCON_DS_WORD (2<<22) +#define S3C2410_SDIDCON_IRQPERIOD (1<<21) +#define S3C2410_SDIDCON_TXAFTERRESP (1<<20) +#define S3C2410_SDIDCON_RXAFTERCMD (1<<19) +#define S3C2410_SDIDCON_BUSYAFTERCMD (1<<18) +#define S3C2410_SDIDCON_BLOCKMODE (1<<17) +#define S3C2410_SDIDCON_WIDEBUS (1<<16) +#define S3C2410_SDIDCON_DMAEN (1<<15) +#define S3C2410_SDIDCON_STOP (1<<14) +#define S3C2440_SDIDCON_DATSTART (1<<14) +#define S3C2410_SDIDCON_DATMODE (3<<12) +#define S3C2410_SDIDCON_BLKNUM (0x7ff) + +/* constants for S3C2410_SDIDCON_DATMODE */ +#define S3C2410_SDIDCON_XFER_READY (0<<12) +#define S3C2410_SDIDCON_XFER_CHKSTART (1<<12) +#define S3C2410_SDIDCON_XFER_RXSTART (2<<12) +#define S3C2410_SDIDCON_XFER_TXSTART (3<<12) + +#define S3C2410_SDIDCON_BLKNUM_MASK (0xFFF) +#define S3C2410_SDIDCNT_BLKNUM_SHIFT (12) + +#define S3C2410_SDIDSTA_RDYWAITREQ (1<<10) +#define S3C2410_SDIDSTA_SDIOIRQDETECT (1<<9) +#define S3C2410_SDIDSTA_FIFOFAIL (1<<8) /* reserved on 2440 */ +#define S3C2410_SDIDSTA_CRCFAIL (1<<7) +#define S3C2410_SDIDSTA_RXCRCFAIL (1<<6) +#define S3C2410_SDIDSTA_DATATIMEOUT (1<<5) +#define S3C2410_SDIDSTA_XFERFINISH (1<<4) +#define S3C2410_SDIDSTA_BUSYFINISH (1<<3) +#define S3C2410_SDIDSTA_SBITERR (1<<2) /* reserved on 2410a/2440 */ +#define S3C2410_SDIDSTA_TXDATAON (1<<1) +#define S3C2410_SDIDSTA_RXDATAON (1<<0) + +#define S3C2440_SDIFSTA_FIFORESET (1<<16) +#define S3C2440_SDIFSTA_FIFOFAIL (3<<14) /* 3 is correct (2 bits) */ +#define S3C2410_SDIFSTA_TFDET (1<<13) +#define S3C2410_SDIFSTA_RFDET (1<<12) +#define S3C2410_SDIFSTA_TFHALF (1<<11) +#define S3C2410_SDIFSTA_TFEMPTY (1<<10) +#define S3C2410_SDIFSTA_RFLAST (1<<9) +#define S3C2410_SDIFSTA_RFFULL (1<<8) +#define S3C2410_SDIFSTA_RFHALF (1<<7) +#define S3C2410_SDIFSTA_COUNTMASK (0x7f) + +#define S3C2410_SDIIMSK_RESPONSECRC (1<<17) +#define S3C2410_SDIIMSK_CMDSENT (1<<16) +#define S3C2410_SDIIMSK_CMDTIMEOUT (1<<15) +#define S3C2410_SDIIMSK_RESPONSEND (1<<14) +#define S3C2410_SDIIMSK_READWAIT (1<<13) +#define S3C2410_SDIIMSK_SDIOIRQ (1<<12) +#define S3C2410_SDIIMSK_FIFOFAIL (1<<11) +#define S3C2410_SDIIMSK_CRCSTATUS (1<<10) +#define S3C2410_SDIIMSK_DATACRC (1<<9) +#define S3C2410_SDIIMSK_DATATIMEOUT (1<<8) +#define S3C2410_SDIIMSK_DATAFINISH (1<<7) +#define S3C2410_SDIIMSK_BUSYFINISH (1<<6) +#define S3C2410_SDIIMSK_SBITERR (1<<5) /* reserved 2440/2410a */ +#define S3C2410_SDIIMSK_TXFIFOHALF (1<<4) +#define S3C2410_SDIIMSK_TXFIFOEMPTY (1<<3) +#define S3C2410_SDIIMSK_RXFIFOLAST (1<<2) +#define S3C2410_SDIIMSK_RXFIFOFULL (1<<1) +#define S3C2410_SDIIMSK_RXFIFOHALF (1<<0) + +#endif /* __ASM_ARM_REGS_SDI */ diff --git a/arch/arm/mach-s3c2410/include/mach/reset.h b/arch/arm/mach-s3c2410/include/mach/reset.h new file mode 100644 index 000000000000..f8c9387b049d --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/reset.h @@ -0,0 +1,22 @@ +/* arch/arm/mach-s3c2410/include/mach/reset.h + * + * Copyright (c) 2007 Simtec Electronics + * Ben Dooks + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2410 CPU reset controls +*/ + +#ifndef __ASM_ARCH_RESET_H +#define __ASM_ARCH_RESET_H __FILE__ + +/* This allows the over-ride of the default reset code +*/ + +extern void (*s3c24xx_reset_hook)(void); + +#endif /* __ASM_ARCH_RESET_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/spi-gpio.h b/arch/arm/mach-s3c2410/include/mach/spi-gpio.h new file mode 100644 index 000000000000..3fe8be9ca110 --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/spi-gpio.h @@ -0,0 +1,27 @@ +/* arch/arm/mach-s3c2410/include/mach/spi-gpio.h + * + * Copyright (c) 2006 Simtec Electronics + * Ben Dooks + * + * S3C2410 - SPI Controller platfrom_device info + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_SPIGPIO_H +#define __ASM_ARCH_SPIGPIO_H __FILE__ + +struct s3c2410_spigpio_info { + unsigned long pin_clk; + unsigned long pin_mosi; + unsigned long pin_miso; + + int bus_num; + + void (*chip_select)(struct s3c2410_spigpio_info *spi, int cs); +}; + + +#endif /* __ASM_ARCH_SPIGPIO_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/spi.h b/arch/arm/mach-s3c2410/include/mach/spi.h new file mode 100644 index 000000000000..921b13b4f0a0 --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/spi.h @@ -0,0 +1,25 @@ +/* arch/arm/mach-s3c2410/include/mach/spi.h + * + * Copyright (c) 2006 Simtec Electronics + * Ben Dooks + * + * S3C2410 - SPI Controller platform_device info + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_SPI_H +#define __ASM_ARCH_SPI_H __FILE__ + +struct s3c2410_spi_info { + unsigned long pin_cs; /* simple gpio cs */ + unsigned int num_cs; /* total chipselects */ + int bus_num; /* bus number to use. */ + + void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol); +}; + + +#endif /* __ASM_ARCH_SPI_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/system-reset.h b/arch/arm/mach-s3c2410/include/mach/system-reset.h new file mode 100644 index 000000000000..ec2defebf0d5 --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/system-reset.h @@ -0,0 +1,64 @@ +/* arch/arm/mach-s3c2410/include/mach/system-reset.h + * + * Copyright (c) 2008 Simtec Electronics + * Ben Dooks + * + * S3C2410 - System define for arch_reset() function + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include + +#include +#include + +#include +#include + +extern void (*s3c24xx_reset_hook)(void); + +static void +arch_reset(char mode) +{ + struct clk *wdtclk; + + if (mode == 's') { + cpu_reset(0); + } + + if (s3c24xx_reset_hook) + s3c24xx_reset_hook(); + + printk("arch_reset: attempting watchdog reset\n"); + + __raw_writel(0, S3C2410_WTCON); /* disable watchdog, to be safe */ + + wdtclk = clk_get(NULL, "watchdog"); + if (!IS_ERR(wdtclk)) { + clk_enable(wdtclk); + } else + printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__); + + /* put initial values into count and data */ + __raw_writel(0x80, S3C2410_WTCNT); + __raw_writel(0x80, S3C2410_WTDAT); + + /* set the watchdog to go and reset... */ + __raw_writel(S3C2410_WTCON_ENABLE|S3C2410_WTCON_DIV16|S3C2410_WTCON_RSTEN | + S3C2410_WTCON_PRESCALE(0x20), S3C2410_WTCON); + + /* wait for reset to assert... */ + mdelay(500); + + printk(KERN_ERR "Watchdog reset failed to assert reset\n"); + + /* delay to allow the serial port to show the message */ + mdelay(50); + + /* we'll take a jump through zero as a poor second */ + cpu_reset(0); +} diff --git a/arch/arm/mach-s3c2410/include/mach/system.h b/arch/arm/mach-s3c2410/include/mach/system.h new file mode 100644 index 000000000000..e9f676bc0116 --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/system.h @@ -0,0 +1,58 @@ +/* arch/arm/mach-s3c2410/include/mach/system.h + * + * Copyright (c) 2003 Simtec Electronics + * Ben Dooks + * + * S3C2410 - System function defines and includes + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include + +#include +#include +#include + +#include + +void (*s3c24xx_idle)(void); +void (*s3c24xx_reset_hook)(void); + +void s3c24xx_default_idle(void) +{ + unsigned long tmp; + int i; + + /* idle the system by using the idle mode which will wait for an + * interrupt to happen before restarting the system. + */ + + /* Warning: going into idle state upsets jtag scanning */ + + __raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE, + S3C2410_CLKCON); + + /* the samsung port seems to do a loop and then unset idle.. */ + for (i = 0; i < 50; i++) { + tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */ + } + + /* this bit is not cleared on re-start... */ + + __raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE, + S3C2410_CLKCON); +} + +static void arch_idle(void) +{ + if (s3c24xx_idle != NULL) + (s3c24xx_idle)(); + else + s3c24xx_default_idle(); +} + +#include diff --git a/arch/arm/mach-s3c2410/include/mach/timex.h b/arch/arm/mach-s3c2410/include/mach/timex.h new file mode 100644 index 000000000000..2a425ed0a7e0 --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/timex.h @@ -0,0 +1,26 @@ +/* arch/arm/mach-s3c2410/include/mach/timex.h + * + * Copyright (c) 2003-2005 Simtec Electronics + * Ben Dooks + * + * S3C2410 - time parameters + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_TIMEX_H +#define __ASM_ARCH_TIMEX_H + +/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it + * a variable is useless. It seems as long as we make our timers an + * exact multiple of HZ, any value that makes a 1->1 correspondence + * for the time conversion functions to/from jiffies is acceptable. +*/ + + +#define CLOCK_TICK_RATE 12000000 + + +#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/uncompress.h b/arch/arm/mach-s3c2410/include/mach/uncompress.h new file mode 100644 index 000000000000..708e47459ffc --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/uncompress.h @@ -0,0 +1,52 @@ +/* arch/arm/mach-s3c2410/include/mach/uncompress.h + * + * Copyright (c) 2003, 2007 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * S3C2410 - uncompress code + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_UNCOMPRESS_H +#define __ASM_ARCH_UNCOMPRESS_H + +#include +#include + +/* working in physical space... */ +#undef S3C2410_GPIOREG +#define S3C2410_GPIOREG(x) ((S3C24XX_PA_GPIO + (x))) + +#include + +static inline int is_arm926(void) +{ + unsigned int cpuid; + + asm volatile ("mrc p15, 0, %0, c1, c0, 0" : "=r" (cpuid)); + + return ((cpuid & 0xff0) == 0x260); +} + +static void arch_detect_cpu(void) +{ + unsigned int cpuid; + + cpuid = *((volatile unsigned int *)S3C2410_GSTATUS1); + cpuid &= S3C2410_GSTATUS1_IDMASK; + + if (is_arm926() || cpuid == S3C2410_GSTATUS1_2440 || + cpuid == S3C2410_GSTATUS1_2442) { + fifo_mask = S3C2440_UFSTAT_TXMASK; + fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT; + } else { + fifo_mask = S3C2410_UFSTAT_TXMASK; + fifo_max = 15 << S3C2410_UFSTAT_TXSHIFT; + } +} + +#endif /* __ASM_ARCH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/usb-control.h b/arch/arm/mach-s3c2410/include/mach/usb-control.h new file mode 100644 index 000000000000..cd91d1591f31 --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/usb-control.h @@ -0,0 +1,41 @@ +/* arch/arm/mach-s3c2410/include/mach/usb-control.h + * + * Copyright (c) 2004 Simtec Electronics + * Ben Dooks + * + * S3C2410 - usb port information + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_USBCONTROL_H +#define __ASM_ARCH_USBCONTROL_H "arch/arm/mach-s3c2410/include/mach/usb-control.h" + +#define S3C_HCDFLG_USED (1) + +struct s3c2410_hcd_port { + unsigned char flags; + unsigned char power; + unsigned char oc_status; + unsigned char oc_changed; +}; + +struct s3c2410_hcd_info { + struct usb_hcd *hcd; + struct s3c2410_hcd_port port[2]; + + void (*power_control)(int port, int to); + void (*enable_oc)(struct s3c2410_hcd_info *, int on); + void (*report_oc)(struct s3c2410_hcd_info *, int ports); +}; + +static void inline s3c2410_usb_report_oc(struct s3c2410_hcd_info *info, int ports) +{ + if (info->report_oc != NULL) { + (info->report_oc)(info, ports); + } +} + +#endif /*__ASM_ARCH_USBCONTROL_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/vmalloc.h b/arch/arm/mach-s3c2410/include/mach/vmalloc.h new file mode 100644 index 000000000000..315b0078a34d --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/vmalloc.h @@ -0,0 +1,20 @@ +/* arch/arm/mach-s3c2410/include/mach/vmalloc.h + * + * from arch/arm/mach-iop3xx/include/mach/vmalloc.h + * + * Copyright (c) 2003 Simtec Electronics + * http://www.simtec.co.uk/products/SWLINUX/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2410 vmalloc definition +*/ + +#ifndef __ASM_ARCH_VMALLOC_H +#define __ASM_ARCH_VMALLOC_H + +#define VMALLOC_END (0xE0000000) + +#endif /* __ASM_ARCH_VMALLOC_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/vr1000-cpld.h b/arch/arm/mach-s3c2410/include/mach/vr1000-cpld.h new file mode 100644 index 000000000000..e4119913d7c5 --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/vr1000-cpld.h @@ -0,0 +1,18 @@ +/* arch/arm/mach-s3c2410/include/mach/vr1000-cpld.h + * + * Copyright (c) 2003 Simtec Electronics + * Ben Dooks + * + * VR1000 - CPLD control constants + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_VR1000CPLD_H +#define __ASM_ARCH_VR1000CPLD_H + +#define VR1000_CPLD_CTRL2_RAMWEN (0x04) /* SRAM Write Enable */ + +#endif /* __ASM_ARCH_VR1000CPLD_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/vr1000-irq.h b/arch/arm/mach-s3c2410/include/mach/vr1000-irq.h new file mode 100644 index 000000000000..f53f85b4ad8b --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/vr1000-irq.h @@ -0,0 +1,26 @@ +/* arch/arm/mach-s3c2410/include/mach/vr1000-irq.h + * + * Copyright (c) 2003,2004 Simtec Electronics + * Ben Dooks + * + * Machine VR1000 - IRQ Number definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_VR1000IRQ_H +#define __ASM_ARCH_VR1000IRQ_H + +/* irq numbers to onboard peripherals */ + +#define IRQ_USBOC IRQ_EINT19 +#define IRQ_IDE0 IRQ_EINT16 +#define IRQ_IDE1 IRQ_EINT17 +#define IRQ_VR1000_SERIAL IRQ_EINT12 +#define IRQ_VR1000_DM9000A IRQ_EINT10 +#define IRQ_VR1000_DM9000N IRQ_EINT9 +#define IRQ_SMALERT IRQ_EINT8 + +#endif /* __ASM_ARCH_VR1000IRQ_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/vr1000-map.h b/arch/arm/mach-s3c2410/include/mach/vr1000-map.h new file mode 100644 index 000000000000..99612fcc4eb2 --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/vr1000-map.h @@ -0,0 +1,110 @@ +/* arch/arm/mach-s3c2410/include/mach/vr1000-map.h + * + * Copyright (c) 2003-2005 Simtec Electronics + * Ben Dooks + * + * Machine VR1000 - Memory map definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* needs arch/map.h including with this */ + +/* ok, we've used up to 0x13000000, now we need to find space for the + * peripherals that live in the nGCS[x] areas, which are quite numerous + * in their space. We also have the board's CPLD to find register space + * for. + */ + +#ifndef __ASM_ARCH_VR1000MAP_H +#define __ASM_ARCH_VR1000MAP_H + +#include + +#define VR1000_IOADDR(x) BAST_IOADDR(x) + +/* we put the CPLD registers next, to get them out of the way */ + +#define VR1000_VA_CTRL1 VR1000_IOADDR(0x00000000) /* 0x01300000 */ +#define VR1000_PA_CTRL1 (S3C2410_CS5 | 0x7800000) + +#define VR1000_VA_CTRL2 VR1000_IOADDR(0x00100000) /* 0x01400000 */ +#define VR1000_PA_CTRL2 (S3C2410_CS1 | 0x6000000) + +#define VR1000_VA_CTRL3 VR1000_IOADDR(0x00200000) /* 0x01500000 */ +#define VR1000_PA_CTRL3 (S3C2410_CS1 | 0x6800000) + +#define VR1000_VA_CTRL4 VR1000_IOADDR(0x00300000) /* 0x01600000 */ +#define VR1000_PA_CTRL4 (S3C2410_CS1 | 0x7000000) + +/* next, we have the PC104 ISA interrupt registers */ + +#define VR1000_PA_PC104_IRQREQ (S3C2410_CS5 | 0x6000000) /* 0x01700000 */ +#define VR1000_VA_PC104_IRQREQ VR1000_IOADDR(0x00400000) + +#define VR1000_PA_PC104_IRQRAW (S3C2410_CS5 | 0x6800000) /* 0x01800000 */ +#define VR1000_VA_PC104_IRQRAW VR1000_IOADDR(0x00500000) + +#define VR1000_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000) /* 0x01900000 */ +#define VR1000_VA_PC104_IRQMASK VR1000_IOADDR(0x00600000) + +/* 0xE0000000 contains the IO space that is split by speed and + * wether the access is for 8 or 16bit IO... this ensures that + * the correct access is made + * + * 0x10000000 of space, partitioned as so: + * + * 0x00000000 to 0x04000000 8bit, slow + * 0x04000000 to 0x08000000 16bit, slow + * 0x08000000 to 0x0C000000 16bit, net + * 0x0C000000 to 0x10000000 16bit, fast + * + * each of these spaces has the following in: + * + * 0x02000000 to 0x02100000 1MB IDE primary channel + * 0x02100000 to 0x02200000 1MB IDE primary channel aux + * 0x02200000 to 0x02400000 1MB IDE secondary channel + * 0x02300000 to 0x02400000 1MB IDE secondary channel aux + * 0x02500000 to 0x02600000 1MB Davicom DM9000 ethernet controllers + * 0x02600000 to 0x02700000 1MB + * + * the phyiscal layout of the zones are: + * nGCS2 - 8bit, slow + * nGCS3 - 16bit, slow + * nGCS4 - 16bit, net + * nGCS5 - 16bit, fast + */ + +#define VR1000_VA_MULTISPACE (0xE0000000) + +#define VR1000_VA_ISAIO (VR1000_VA_MULTISPACE + 0x00000000) +#define VR1000_VA_ISAMEM (VR1000_VA_MULTISPACE + 0x01000000) +#define VR1000_VA_IDEPRI (VR1000_VA_MULTISPACE + 0x02000000) +#define VR1000_VA_IDEPRIAUX (VR1000_VA_MULTISPACE + 0x02100000) +#define VR1000_VA_IDESEC (VR1000_VA_MULTISPACE + 0x02200000) +#define VR1000_VA_IDESECAUX (VR1000_VA_MULTISPACE + 0x02300000) +#define VR1000_VA_ASIXNET (VR1000_VA_MULTISPACE + 0x02400000) +#define VR1000_VA_DM9000 (VR1000_VA_MULTISPACE + 0x02500000) +#define VR1000_VA_SUPERIO (VR1000_VA_MULTISPACE + 0x02600000) + +/* physical offset addresses for the peripherals */ + +#define VR1000_PA_IDEPRI (0x02000000) +#define VR1000_PA_IDEPRIAUX (0x02800000) +#define VR1000_PA_IDESEC (0x03000000) +#define VR1000_PA_IDESECAUX (0x03800000) +#define VR1000_PA_DM9000 (0x05000000) + +#define VR1000_PA_SERIAL (0x11800000) +#define VR1000_VA_SERIAL (VR1000_IOADDR(0x00700000)) + +/* VR1000 ram is in CS1, with A26..A24 = 2_101 */ +#define VR1000_PA_SRAM (S3C2410_CS1 | 0x05000000) + +/* some configurations for the peripherals */ + +#define VR1000_DM9000_CS VR1000_VAM_CS4 + +#endif /* __ASM_ARCH_VR1000MAP_H */ diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c index 2d72496ed09f..f0de3c23ce78 100644 --- a/arch/arm/mach-s3c2410/mach-amlm5900.c +++ b/arch/arm/mach-s3c2410/mach-amlm5900.c @@ -42,15 +42,15 @@ #include #include -#include +#include #include #include #include -#include +#include #include -#include -#include +#include +#include #include #include diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index 9c76df6662a1..fb1e78e28e50 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -29,24 +29,24 @@ #include #include -#include -#include -#include +#include +#include +#include -#include +#include #include #include #include //#include #include -#include -#include -#include +#include +#include +#include #include #include -#include +#include #include #include diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index f658b8421302..e35933a46d10 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -25,19 +25,19 @@ #include #include -#include +#include #include #include #include #include -#include -#include -#include +#include +#include +#include -#include -#include -#include +#include +#include +#include #include #include diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c index cbc7956a24e1..80fe2ed0775c 100644 --- a/arch/arm/mach-s3c2410/mach-n30.c +++ b/arch/arm/mach-s3c2410/mach-n30.c @@ -26,15 +26,15 @@ #include #include -#include +#include #include #include #include -#include -#include -#include -#include +#include +#include +#include +#include #include #include diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c index 3b5dc6e81ea5..606ee15911b6 100644 --- a/arch/arm/mach-s3c2410/mach-otom.c +++ b/arch/arm/mach-s3c2410/mach-otom.c @@ -22,15 +22,15 @@ #include #include -#include +#include -#include +#include #include #include #include #include -#include +#include #include #include diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c index 012dc14ffb2b..7d34844debde 100644 --- a/arch/arm/mach-s3c2410/mach-qt2410.c +++ b/arch/arm/mach-s3c2410/mach-qt2410.c @@ -42,19 +42,19 @@ #include #include -#include +#include #include #include #include -#include -#include +#include +#include #include -#include +#include #include #include -#include -#include +#include +#include #include #include diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c index 849ebe92adcc..c9040080727e 100644 --- a/arch/arm/mach-s3c2410/mach-smdk2410.c +++ b/arch/arm/mach-s3c2410/mach-smdk2410.c @@ -42,7 +42,7 @@ #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-s3c2410/mach-tct_hammer.c b/arch/arm/mach-s3c2410/mach-tct_hammer.c index d7646a91a1ef..ec87306a8c24 100644 --- a/arch/arm/mach-s3c2410/mach-tct_hammer.c +++ b/arch/arm/mach-s3c2410/mach-tct_hammer.c @@ -39,7 +39,7 @@ #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c index a3f60cd0bba7..12cbca68f57d 100644 --- a/arch/arm/mach-s3c2410/mach-vr1000.c +++ b/arch/arm/mach-s3c2410/mach-vr1000.c @@ -30,19 +30,19 @@ #include #include -#include -#include -#include -#include +#include +#include +#include +#include -#include +#include #include #include #include #include -#include -#include +#include +#include #include #include diff --git a/arch/arm/mach-s3c2410/nor-simtec.c b/arch/arm/mach-s3c2410/nor-simtec.c index f44e21b9c3ba..b2ae237042a5 100644 --- a/arch/arm/mach-s3c2410/nor-simtec.c +++ b/arch/arm/mach-s3c2410/nor-simtec.c @@ -26,9 +26,9 @@ #include #include -#include -#include -#include +#include +#include +#include static void simtec_nor_vpp(struct map_info *map, int vpp) diff --git a/arch/arm/mach-s3c2410/pm-h1940.S b/arch/arm/mach-s3c2410/pm-h1940.S index cb87c941fe47..c93bf2db9f4d 100644 --- a/arch/arm/mach-s3c2410/pm-h1940.S +++ b/arch/arm/mach-s3c2410/pm-h1940.S @@ -20,10 +20,10 @@ #include #include -#include -#include +#include +#include -#include +#include .text .global h1940_pm_return diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c index b9087273c244..ba43ff9e8164 100644 --- a/arch/arm/mach-s3c2410/pm.c +++ b/arch/arm/mach-s3c2410/pm.c @@ -26,13 +26,13 @@ #include #include -#include +#include #include #include -#include -#include +#include +#include #include #include diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c index 54d4b7983c95..5d977f9c88ac 100644 --- a/arch/arm/mach-s3c2410/s3c2410.c +++ b/arch/arm/mach-s3c2410/s3c2410.c @@ -24,11 +24,11 @@ #include #include -#include +#include #include #include -#include +#include #include #include diff --git a/arch/arm/mach-s3c2410/sleep.S b/arch/arm/mach-s3c2410/sleep.S index 1597fcf9d7a1..be37f221a177 100644 --- a/arch/arm/mach-s3c2410/sleep.S +++ b/arch/arm/mach-s3c2410/sleep.S @@ -26,12 +26,12 @@ #include #include -#include -#include +#include +#include -#include -#include -#include +#include +#include +#include #include /* s3c2410_cpu_suspend diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c index 28942e0acc98..4dacf8a1750d 100644 --- a/arch/arm/mach-s3c2410/usb-simtec.c +++ b/arch/arm/mach-s3c2410/usb-simtec.c @@ -26,12 +26,12 @@ #include #include -#include -#include -#include -#include +#include +#include +#include +#include -#include +#include #include #include -- cgit v1.2.3