From 0873509ea64739a9be02e8ee7b4ff573e503ab8e Mon Sep 17 00:00:00 2001 From: Horatiu Vultur Date: Wed, 26 Oct 2022 19:43:03 +0200 Subject: ARM: dts: lan966x: Enable sgpio on pcb8291 Enable sgpio node on pcb8291 as this is needed to be able to control the LEDs on this board. Otherwise the LEDs support on the board will not be available. On the other board pcb8309 the sgpio is already enabled because it needed to access the SFP ports. Fixes: 0b7baa1a307f ("ARM: dts: lan966x: add led configuration") Signed-off-by: Horatiu Vultur Signed-off-by: Claudiu Beznea Link: https://lore.kernel.org/r/20221026174303.702919-1-horatiu.vultur@microchip.com --- arch/arm/boot/dts/lan966x-pcb8291.dts | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/lan966x-pcb8291.dts b/arch/arm/boot/dts/lan966x-pcb8291.dts index f4f054cdf2a8..3a3d76af8612 100644 --- a/arch/arm/boot/dts/lan966x-pcb8291.dts +++ b/arch/arm/boot/dts/lan966x-pcb8291.dts @@ -69,6 +69,12 @@ pins = "GPIO_35", "GPIO_36"; function = "can0_b"; }; + + sgpio_a_pins: sgpio-a-pins { + /* SCK, D0, D1, LD */ + pins = "GPIO_32", "GPIO_33", "GPIO_34", "GPIO_35"; + function = "sgpio_a"; + }; }; &can0 { @@ -118,6 +124,20 @@ status = "okay"; }; +&sgpio { + pinctrl-0 = <&sgpio_a_pins>; + pinctrl-names = "default"; + microchip,sgpio-port-ranges = <0 3>, <8 11>; + status = "okay"; + + gpio@0 { + ngpios = <64>; + }; + gpio@1 { + ngpios = <64>; + }; +}; + &switch { status = "okay"; }; -- cgit v1.2.3