From 60bccbed6f53c953c62bdc2ac699395a13b6eecc Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Tue, 19 Dec 2006 17:35:49 +0900 Subject: [POWERPC] Use is_init() instead of pid==1 Use is_init() rather than hard coded pid comparison. Cc: Anton Blanchard Signed-off-by: Akinobu Mita Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/traps.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index 535f50665647..6915b91868b8 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -174,7 +174,7 @@ void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr) * generate the same exception over and over again and we get * nowhere. Better to kill it and let the kernel panic. */ - if (current->pid == 1) { + if (is_init(current)) { __sighandler_t handler; spin_lock_irq(¤t->sighand->siglock); -- cgit v1.2.3 From a885902de3394ef18ca415f9175da5d8a8406cca Mon Sep 17 00:00:00 2001 From: Linas Vepstas Date: Tue, 19 Dec 2006 13:06:17 -0600 Subject: [POWERPC] Clarify EEH error message Clarify error message re EEH permanent failure. Signed-off-by: Linas Vepstas Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pseries/eeh_driver.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/pseries/eeh_driver.c b/arch/powerpc/platforms/pseries/eeh_driver.c index cbd6b0711ab4..a4c0bf84ef2e 100644 --- a/arch/powerpc/platforms/pseries/eeh_driver.c +++ b/arch/powerpc/platforms/pseries/eeh_driver.c @@ -446,7 +446,8 @@ excess_failures: */ printk(KERN_ERR "EEH: PCI device at location=%s driver=%s pci addr=%s \n" - "has failed %d times and has been permanently disabled. \n" + "has failed %d times in the last hour " + "and has been permanently disabled. \n" "Please try reseating this device or replacing it.\n", location, drv_str, pci_str, frozen_pdn->eeh_freeze_count); goto perm_error; -- cgit v1.2.3 From a2894cfb3a6d60980ba85181e31ccc079807e92b Mon Sep 17 00:00:00 2001 From: Michal Ostrowski Date: Wed, 27 Dec 2006 22:14:43 -0600 Subject: [POWERPC] Do not write virq back to PCI config space - Drivers will not rely on the PCI config space value, as they've already been conditioned to rely on the irq field in "struct pci_dev". - The virq value may not be < 256 as it has been remapped. - The PCI config space should reflect the hardware configuration, which is not being changed. We are only creating a virtual irq mapping that exists in the kernel only. One would never expect the PCI hardware to generate the "virq" interrupt. Signed-off-by: Michal Ostrowski Acked-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/pci_32.c | 1 - arch/powerpc/kernel/pci_64.c | 1 - 2 files changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c index c54f3639c5ad..d8ef2e100505 100644 --- a/arch/powerpc/kernel/pci_32.c +++ b/arch/powerpc/kernel/pci_32.c @@ -1450,7 +1450,6 @@ int pci_read_irq_line(struct pci_dev *pci_dev) return -1; } pci_dev->irq = virq; - pci_write_config_byte(pci_dev, PCI_INTERRUPT_LINE, virq); return 0; } diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c index 73c59ec49120..b6d08738180b 100644 --- a/arch/powerpc/kernel/pci_64.c +++ b/arch/powerpc/kernel/pci_64.c @@ -1325,7 +1325,6 @@ int pci_read_irq_line(struct pci_dev *pci_dev) DBG(" -> mapped to linux irq %d\n", virq); pci_dev->irq = virq; - pci_write_config_byte(pci_dev, PCI_INTERRUPT_LINE, virq); return 0; } -- cgit v1.2.3 From b1374051433cc252540058e8a90107c90fa23eb4 Mon Sep 17 00:00:00 2001 From: Mariusz Kozlowski Date: Tue, 2 Jan 2007 12:31:47 +0100 Subject: [POWERPC] arch/ppc/kernel/prom.c of_node_(get|put) cleanup Remove redundant argument checks for of_node_get() and of_node_put(). Signed-off-by: Mariusz Kozlowski Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/prom.c | 18 ++++++------------ 1 file changed, 6 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 1fc732a552db..3be52d693eca 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -1221,8 +1221,7 @@ struct device_node *of_find_node_by_name(struct device_node *from, if (np->name != NULL && strcasecmp(np->name, name) == 0 && of_node_get(np)) break; - if (from) - of_node_put(from); + of_node_put(from); read_unlock(&devtree_lock); return np; } @@ -1250,8 +1249,7 @@ struct device_node *of_find_node_by_type(struct device_node *from, if (np->type != 0 && strcasecmp(np->type, type) == 0 && of_node_get(np)) break; - if (from) - of_node_put(from); + of_node_put(from); read_unlock(&devtree_lock); return np; } @@ -1285,8 +1283,7 @@ struct device_node *of_find_compatible_node(struct device_node *from, if (device_is_compatible(np, compatible) && of_node_get(np)) break; } - if (from) - of_node_put(from); + of_node_put(from); read_unlock(&devtree_lock); return np; } @@ -1329,8 +1326,7 @@ struct device_node *of_find_node_by_phandle(phandle handle) for (np = allnodes; np != 0; np = np->allnext) if (np->linux_phandle == handle) break; - if (np) - of_node_get(np); + of_node_get(np); read_unlock(&devtree_lock); return np; } @@ -1353,8 +1349,7 @@ struct device_node *of_find_all_nodes(struct device_node *prev) for (; np != 0; np = np->allnext) if (of_node_get(np)) break; - if (prev) - of_node_put(prev); + of_node_put(prev); read_unlock(&devtree_lock); return np; } @@ -1399,8 +1394,7 @@ struct device_node *of_get_next_child(const struct device_node *node, for (; next != 0; next = next->sibling) if (of_node_get(next)) break; - if (prev) - of_node_put(prev); + of_node_put(prev); read_unlock(&devtree_lock); return next; } -- cgit v1.2.3 From 6690faeb3537fe34950bdc3e10fa14ce4102c92f Mon Sep 17 00:00:00 2001 From: Mariusz Kozlowski Date: Tue, 2 Jan 2007 12:38:36 +0100 Subject: [POWERPC] arch/powerpc/kernel/vio.c of_node_put cleanup Remove redundant argument check for of_node_put(). Signed-off-by: Mariusz Kozlowski Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/vio.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c index a80f8f1d2e5d..2968ffeafdb6 100644 --- a/arch/powerpc/kernel/vio.c +++ b/arch/powerpc/kernel/vio.c @@ -199,10 +199,8 @@ EXPORT_SYMBOL(vio_unregister_driver); /* vio_dev refcount hit 0 */ static void __devinit vio_dev_release(struct device *dev) { - if (dev->archdata.of_node) { - /* XXX should free TCE table */ - of_node_put(dev->archdata.of_node); - } + /* XXX should free TCE table */ + of_node_put(dev->archdata.of_node); kfree(to_vio_dev(dev)); } -- cgit v1.2.3 From af337c096ca47ac1a776e6f1ea2cde9a85d0e60b Mon Sep 17 00:00:00 2001 From: Mariusz Kozlowski Date: Tue, 2 Jan 2007 12:50:20 +0100 Subject: [POWERPC] arch/powerpc/sysdev/ipic.c of_node_get cleanup No need for ?: because of_node_get() can handle NULL argument. Signed-off-by: Mariusz Kozlowski Signed-off-by: Paul Mackerras --- arch/powerpc/sysdev/ipic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/sysdev/ipic.c b/arch/powerpc/sysdev/ipic.c index 746f78c15375..522aa14e8f0d 100644 --- a/arch/powerpc/sysdev/ipic.c +++ b/arch/powerpc/sysdev/ipic.c @@ -569,7 +569,7 @@ void __init ipic_init(struct device_node *node, return; memset(ipic, 0, sizeof(struct ipic)); - ipic->of_node = node ? of_node_get(node) : NULL; + ipic->of_node = of_node_get(node); ipic->irqhost = irq_alloc_host(IRQ_HOST_MAP_LINEAR, NR_IPIC_INTS, -- cgit v1.2.3 From c3bfc3a8dd337e41cf7b64f815e37f6e2cfbfcdc Mon Sep 17 00:00:00 2001 From: Mariusz Kozlowski Date: Tue, 2 Jan 2007 12:52:47 +0100 Subject: [POWERPC] arch/powerpc/sysdev/mpic.c of_node_get cleanup No need for ?: because of_node_get() can handle NULL argument. Signed-off-by: Mariusz Kozlowski Signed-off-by: Paul Mackerras --- arch/powerpc/sysdev/mpic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index d01ced11694d..62262f2a4a83 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -912,7 +912,7 @@ struct mpic * __init mpic_alloc(struct device_node *node, memset(mpic, 0, sizeof(struct mpic)); mpic->name = name; - mpic->of_node = node ? of_node_get(node) : NULL; + mpic->of_node = of_node_get(node); mpic->irqhost = irq_alloc_host(IRQ_HOST_MAP_LINEAR, 256, &mpic_host_ops, -- cgit v1.2.3 From a15d5eaa7799cce9cfeec4637db18863e1a89e34 Mon Sep 17 00:00:00 2001 From: Mariusz Kozlowski Date: Tue, 2 Jan 2007 13:07:16 +0100 Subject: [POWERPC] arch/powerpc/sysdev/qe_lib of_node_get cleanup No need for ?: as of_node_get() can handle NULL argument. Signed-off-by: Mariusz Kozlowski arch/powerpc/sysdev/qe_lib/qe_ic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) Signed-off-by: Paul Mackerras --- arch/powerpc/sysdev/qe_lib/qe_ic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.c b/arch/powerpc/sysdev/qe_lib/qe_ic.c index 74e48d94f27c..908568f4dd84 100644 --- a/arch/powerpc/sysdev/qe_lib/qe_ic.c +++ b/arch/powerpc/sysdev/qe_lib/qe_ic.c @@ -352,7 +352,7 @@ void __init qe_ic_init(struct device_node *node, unsigned int flags) return; memset(qe_ic, 0, sizeof(struct qe_ic)); - qe_ic->of_node = node ? of_node_get(node) : NULL; + qe_ic->of_node = of_node_get(node); qe_ic->irqhost = irq_alloc_host(IRQ_HOST_MAP_LINEAR, NR_QE_IC_INTS, &qe_ic_host_ops, 0); -- cgit v1.2.3 From 06c3147564cc65f0a5eac8af2b1834a996933e74 Mon Sep 17 00:00:00 2001 From: Mariusz Kozlowski Date: Tue, 2 Jan 2007 12:36:20 +0100 Subject: [POWERPC] arch/powerpc/sysdev/cpm2_pic.c of_node_get cleanup Remove redundant argument check for of_node_get(). It's ok to remove 'node' check because in real life cpm2_pic_init() never gets called with node == NULL. Signed-off-by: Mariusz Kozlowski Signed-off-by: Paul Mackerras --- arch/powerpc/sysdev/cpm2_pic.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/sysdev/cpm2_pic.c b/arch/powerpc/sysdev/cpm2_pic.c index 767ee6651adc..e2739eb93cdf 100644 --- a/arch/powerpc/sysdev/cpm2_pic.c +++ b/arch/powerpc/sysdev/cpm2_pic.c @@ -245,9 +245,7 @@ void cpm2_pic_init(struct device_node *node) cpm2_intctl->ic_scprrl = 0x05309770; /* create a legacy host */ - if (node) - cpm2_pic_node = of_node_get(node); - + cpm2_pic_node = of_node_get(node); cpm2_pic_host = irq_alloc_host(IRQ_HOST_MAP_LINEAR, 64, &cpm2_pic_host_ops, 64); if (cpm2_pic_host == NULL) { printk(KERN_ERR "CPM2 PIC: failed to allocate irq host!\n"); -- cgit v1.2.3 From 9a3d6458e9dded0a060115b446531cfc77083ebb Mon Sep 17 00:00:00 2001 From: Simon Vallet Date: Wed, 3 Jan 2007 07:49:56 +0100 Subject: [POWERPC] Add support for R_PPC_ADDR16_HI relocations apply_relocate_add() does not support R_PPC_ADDR16_HI relocations, which prevents some non gcc-built modules to be loaded. Signed-off-by: Simon Vallet Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/module_32.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/module_32.c b/arch/powerpc/kernel/module_32.c index 8339fd609de0..07a89a398639 100644 --- a/arch/powerpc/kernel/module_32.c +++ b/arch/powerpc/kernel/module_32.c @@ -224,7 +224,12 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, /* Low half of the symbol */ *(uint16_t *)location = value; break; - + + case R_PPC_ADDR16_HI: + /* Higher half of the symbol */ + *(uint16_t *)location = (value >> 16); + break; + case R_PPC_ADDR16_HA: /* Sign-adjusted lower 16 bits: PPC ELF ABI says: (((x >> 16) + ((x & 0x8000) ? 1 : 0))) & 0xFFFF. -- cgit v1.2.3 From f1f003330b4489f0e6502e1315bf9d764ed5f757 Mon Sep 17 00:00:00 2001 From: Nathan Lynch Date: Wed, 3 Jan 2007 12:56:28 -0600 Subject: [POWERPC] maple: improve CPC9x5 host bridge detection Identify CPC9x5 PCI Express, AGP, and HT host bridges using device_type and compatible properties, which is a more flexible method than using the name property (which can differ between firmwares and models). Signed-off-by: Nathan Lynch Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/maple/pci.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c index 3f6a69f67195..011f0f14f0f2 100644 --- a/arch/powerpc/platforms/maple/pci.c +++ b/arch/powerpc/platforms/maple/pci.c @@ -560,13 +560,16 @@ void __init maple_pci_init(void) return; } for (np = NULL; (np = of_get_next_child(root, np)) != NULL;) { - if (np->name == NULL) + if (!np->type) continue; - if (!strcmp(np->name, "pci") || !strcmp(np->name, "pcie")) { - if (add_bridge(np) == 0) - of_node_get(np); - } - if (strcmp(np->name, "ht") == 0) { + if (strcmp(np->type, "pci") && strcmp(np->type, "ht")) + continue; + if ((device_is_compatible(np, "u4-pcie") || + device_is_compatible(np, "u3-agp")) && + add_bridge(np) == 0) + of_node_get(np); + + if (device_is_compatible(np, "u3-ht")) { of_node_get(np); ht = np; } -- cgit v1.2.3 From 0bcace3b8b07a54ae17b969fa7bbbd4c91f3372c Mon Sep 17 00:00:00 2001 From: Olaf Hering Date: Thu, 4 Jan 2007 18:31:55 +0100 Subject: [POWERPC] Update fixup_winbond_82c105 comment Note all POWER3/POWER4 systems where fixup_winbond_82c105 will run. Signed-off-by: Olaf Hering Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pseries/pci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/pseries/pci.c b/arch/powerpc/platforms/pseries/pci.c index 715db5c89908..c69bd15ced9c 100644 --- a/arch/powerpc/platforms/pseries/pci.c +++ b/arch/powerpc/platforms/pseries/pci.c @@ -77,7 +77,7 @@ void __init pSeries_final_fixup(void) /* * Assume the winbond 82c105 is the IDE controller on a - * p610. We should probably be more careful in case + * p610/p615/p630. We should probably be more careful in case * someone tries to plug in a similar adapter. */ static void fixup_winbond_82c105(struct pci_dev* dev) -- cgit v1.2.3 From 0e47e3cca100e7c8e8124378e4e44969c2e042fd Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Tue, 9 Jan 2007 16:50:10 -0500 Subject: [POWERPC] Select DEFAULT_UIMAGE for HPC-NET/8641 I suspect this was meant to be added like it was to a whole slew of other u-boot based boards, but probably just fell through the cracks. Add "select DEFAULT_UIMAGE" for the 8641/HPC-NET. Signed-off-by: Paul Gortmaker Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/86xx/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig index d1ecc0f9ab58..0c70944d0e37 100644 --- a/arch/powerpc/platforms/86xx/Kconfig +++ b/arch/powerpc/platforms/86xx/Kconfig @@ -8,6 +8,7 @@ choice config MPC8641_HPCN bool "Freescale MPC8641 HPCN" select PPC_I8259 + select DEFAULT_UIMAGE help This option enables support for the MPC8641 HPCN board. -- cgit v1.2.3 From cfcd1705b61ecce1ab102b9593cf733fef314a19 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Sun, 14 Jan 2007 09:38:18 +0800 Subject: [POWERPC] Mask 32-bit system call arguments to 32 bits on PPC64 in audit code The system call entry code will clear the high bits of argument registers before invoking the system call; don't report whatever noise happens to be in the high bits of the register before that happens. Signed-off-by: David Woodhouse Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/ptrace.c | 24 +++++++++++++++--------- 1 file changed, 15 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index 975102a020d9..cc44c7b975aa 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -532,16 +532,22 @@ void do_syscall_trace_enter(struct pt_regs *regs) && (current->ptrace & PT_PTRACED)) do_syscall_trace(); - if (unlikely(current->audit_context)) - audit_syscall_entry( -#ifdef CONFIG_PPC32 - AUDIT_ARCH_PPC, -#else - test_thread_flag(TIF_32BIT)?AUDIT_ARCH_PPC:AUDIT_ARCH_PPC64, + if (unlikely(current->audit_context)) { +#ifdef CONFIG_PPC64 + if (!test_thread_flag(TIF_32BIT)) + audit_syscall_entry(AUDIT_ARCH_PPC64, + regs->gpr[0], + regs->gpr[3], regs->gpr[4], + regs->gpr[5], regs->gpr[6]); + else #endif - regs->gpr[0], - regs->gpr[3], regs->gpr[4], - regs->gpr[5], regs->gpr[6]); + audit_syscall_entry(AUDIT_ARCH_PPC, + regs->gpr[0], + regs->gpr[3] & 0xffffffff, + regs->gpr[4] & 0xffffffff, + regs->gpr[5] & 0xffffffff, + regs->gpr[6] & 0xffffffff); + } } void do_syscall_trace_leave(struct pt_regs *regs) -- cgit v1.2.3 From c53653130f2868e44c6e8346d110d27d39e7d07b Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Sun, 14 Jan 2007 10:15:00 +0100 Subject: [POWERPC] Remove the broken Gemini support Signed-off-by: Adrian Bunk Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/head_32.S | 5 - arch/powerpc/platforms/embedded6xx/Kconfig | 9 - arch/ppc/Kconfig | 9 - arch/ppc/boot/simple/Makefile | 4 - arch/ppc/boot/simple/misc.c | 15 +- arch/ppc/configs/gemini_defconfig | 618 ----------------------------- arch/ppc/kernel/head.S | 18 - arch/ppc/platforms/Makefile | 1 - arch/ppc/platforms/gemini.h | 165 -------- arch/ppc/platforms/gemini_pci.c | 41 -- arch/ppc/platforms/gemini_prom.S | 90 ----- arch/ppc/platforms/gemini_serial.h | 40 -- arch/ppc/platforms/gemini_setup.c | 577 --------------------------- arch/ppc/syslib/Makefile | 1 - arch/ppc/xmon/start.c | 5 +- 15 files changed, 2 insertions(+), 1596 deletions(-) delete mode 100644 arch/ppc/configs/gemini_defconfig delete mode 100644 arch/ppc/platforms/gemini.h delete mode 100644 arch/ppc/platforms/gemini_pci.c delete mode 100644 arch/ppc/platforms/gemini_prom.S delete mode 100644 arch/ppc/platforms/gemini_serial.h delete mode 100644 arch/ppc/platforms/gemini_setup.c (limited to 'arch') diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S index 9417cf5b4b7e..c897203198b1 100644 --- a/arch/powerpc/kernel/head_32.S +++ b/arch/powerpc/kernel/head_32.S @@ -344,12 +344,7 @@ i##n: \ /* System reset */ /* core99 pmac starts the seconary here by changing the vector, and putting it back to what it was (unknown_exception) when done. */ -#if defined(CONFIG_GEMINI) && defined(CONFIG_SMP) - . = 0x100 - b __secondary_start_gemini -#else EXCEPTION(0x100, Reset, unknown_exception, EXC_XFER_STD) -#endif /* Machine check */ /* diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig index b3c2ce4cb7a8..886c522d78e9 100644 --- a/arch/powerpc/platforms/embedded6xx/Kconfig +++ b/arch/powerpc/platforms/embedded6xx/Kconfig @@ -104,15 +104,6 @@ config RADSTONE_PPC7D config PAL4 bool "SBS-Palomar4" -config GEMINI - bool "Synergy-Gemini" - select PPC_INDIRECT_PCI - depends on BROKEN - help - Select Gemini if configuring for a Synergy Microsystems' Gemini - series Single Board Computer. More information is available at: - . - config EST8260 bool "EST8260" ---help--- diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig index 8eb82efe05a1..c22e60619d9b 100644 --- a/arch/ppc/Kconfig +++ b/arch/ppc/Kconfig @@ -670,15 +670,6 @@ config RADSTONE_PPC7D config PAL4 bool "SBS-Palomar4" -config GEMINI - bool "Synergy-Gemini" - depends on BROKEN - select PPC_INDIRECT_PCI - help - Select Gemini if configuring for a Synergy Microsystems' Gemini - series Single Board Computer. More information is available at: - . - config EST8260 bool "EST8260" ---help--- diff --git a/arch/ppc/boot/simple/Makefile b/arch/ppc/boot/simple/Makefile index 28be01b99c44..bcfb6cde70c4 100644 --- a/arch/ppc/boot/simple/Makefile +++ b/arch/ppc/boot/simple/Makefile @@ -116,10 +116,6 @@ zimageinitrd-$(CONFIG_WALNUT) := zImage.initrd-TREE extra.o-$(CONFIG_CHESTNUT) := misc-chestnut.o end-$(CONFIG_CHESTNUT) := chestnut - zimage-$(CONFIG_GEMINI) := zImage-STRIPELF -zimageinitrd-$(CONFIG_GEMINI) := zImage.initrd-STRIPELF - end-$(CONFIG_GEMINI) := gemini - extra.o-$(CONFIG_KATANA) := misc-katana.o end-$(CONFIG_KATANA) := katana cacheflag-$(CONFIG_KATANA) := -include $(clear_L2_L3) diff --git a/arch/ppc/boot/simple/misc.c b/arch/ppc/boot/simple/misc.c index a5df08963695..c3d3305eb5ca 100644 --- a/arch/ppc/boot/simple/misc.c +++ b/arch/ppc/boot/simple/misc.c @@ -42,14 +42,11 @@ #endif /* Will / Can the user give input? - * Val Henson has requested that Gemini doesn't wait for the - * user to edit the cmdline or not. */ #if (defined(CONFIG_SERIAL_8250_CONSOLE) \ || defined(CONFIG_VGA_CONSOLE) \ || defined(CONFIG_SERIAL_MPC52xx_CONSOLE) \ - || defined(CONFIG_SERIAL_MPSC_CONSOLE)) \ - && !defined(CONFIG_GEMINI) + || defined(CONFIG_SERIAL_MPSC_CONSOLE)) #define INTERACTIVE_CONSOLE 1 #endif @@ -178,16 +175,6 @@ decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum) if (keyb_present) CRT_tstc(); /* Forces keyboard to be initialized */ -#ifdef CONFIG_GEMINI - /* - * If cmd_line is empty and cmd_preset is not, copy cmd_preset - * to cmd_line. This way we can override cmd_preset with the - * command line from Smon. - */ - - if ( (cmd_line[0] == '\0') && (cmd_preset[0] != '\0')) - memcpy (cmd_line, cmd_preset, sizeof(cmd_preset)); -#endif /* Display standard Linux/PPC boot prompt for kernel args */ puts("\nLinux/PPC load: "); diff --git a/arch/ppc/configs/gemini_defconfig b/arch/ppc/configs/gemini_defconfig deleted file mode 100644 index ebcd17b097f1..000000000000 --- a/arch/ppc/configs/gemini_defconfig +++ /dev/null @@ -1,618 +0,0 @@ -# -# Automatically generated make config: don't edit -# -CONFIG_MMU=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_HAVE_DEC_LOCK=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y - -# -# General setup -# -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_EMBEDDED is not set -CONFIG_FUTEX=y -CONFIG_EPOLL=y - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y - -# -# Platform support -# -CONFIG_PPC=y -CONFIG_PPC32=y -CONFIG_6xx=y -# CONFIG_40x is not set -# CONFIG_POWER3 is not set -# CONFIG_8xx is not set - -# -# IBM 4xx options -# -# CONFIG_8260 is not set -CONFIG_GENERIC_ISA_DMA=y -CONFIG_PPC_STD_MMU=y -# CONFIG_PPC_MULTIPLATFORM is not set -# CONFIG_APUS is not set -# CONFIG_WILLOW_2 is not set -# CONFIG_PCORE is not set -# CONFIG_POWERPMC250 is not set -# CONFIG_EV64260 is not set -# CONFIG_SPRUCE is not set -# CONFIG_LOPEC is not set -# CONFIG_MCPN765 is not set -# CONFIG_MVME5100 is not set -# CONFIG_PPLUS is not set -# CONFIG_PRPMC750 is not set -# CONFIG_PRPMC800 is not set -# CONFIG_SANDPOINT is not set -# CONFIG_ADIR is not set -# CONFIG_K2 is not set -# CONFIG_PAL4 is not set -CONFIG_GEMINI=y -# CONFIG_SMP is not set -# CONFIG_PREEMPT is not set -CONFIG_ALTIVEC=y -CONFIG_TAU=y -# CONFIG_TAU_INT is not set -# CONFIG_TAU_AVERAGE is not set -# CONFIG_CPU_FREQ is not set - -# -# General setup -# -# CONFIG_HIGHMEM is not set -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_KCORE_ELF=y -CONFIG_BINFMT_ELF=y -CONFIG_KERNEL_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y -# CONFIG_HOTPLUG is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set -# CONFIG_PPC601_SYNC_FIX is not set -# CONFIG_CMDLINE_BOOL is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_BOOT_LOAD=0x00800000 - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Plug and Play support -# -# CONFIG_PNP is not set - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_NBD is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_INITRD=y - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# ATA/IDE/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI support -# -CONFIG_SCSI=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=y - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_REPORT_LUNS is not set -CONFIG_SCSI_CONSTANTS=y -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI low-level drivers -# -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_ADVANSYS is not set -# CONFIG_SCSI_IN2000 is not set -# CONFIG_SCSI_AM53C974 is not set -# CONFIG_SCSI_MEGARAID is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_CPQFCTS is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_GENERIC_NCR5380 is not set -# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_NCR53C7xx is not set -CONFIG_SCSI_SYM53C8XX_2=y -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set -# CONFIG_SCSI_PCI2000 is not set -# CONFIG_SCSI_PCI2220I is not set -# CONFIG_SCSI_QLOGIC_ISP is not set -# CONFIG_SCSI_QLOGIC_FC is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_U14_34F is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support (EXPERIMENTAL) -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set - -# -# IP: Netfilter Configuration -# -# CONFIG_IP_NF_CONNTRACK is not set -# CONFIG_IP_NF_QUEUE is not set -# CONFIG_IP_NF_IPTABLES is not set -# CONFIG_IP_NF_ARPTABLES is not set -# CONFIG_IP_NF_COMPAT_IPCHAINS is not set -# CONFIG_IP_NF_COMPAT_IPFWADM is not set -# CONFIG_IPV6 is not set -# CONFIG_XFRM_USER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -CONFIG_IPV6_SCTP__=y -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_LLC is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -CONFIG_NETDEVICES=y - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set -# CONFIG_OAKNET is not set -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -# CONFIG_NET_PCI is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_IXGB is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Token Ring devices (depends on LLC=y) -# -# CONFIG_NET_FC is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -# CONFIG_IRDA is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN_BOOL is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Input device support -# -# CONFIG_INPUT is not set - -# -# Userland interfaces -# - -# -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -# CONFIG_SERIO is not set - -# -# Input Device Drivers -# - -# -# Macintosh device drivers -# - -# -# Character devices -# -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -CONFIG_UNIX98_PTY_COUNT=256 - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# I2C Hardware Sensors Mainboard support -# - -# -# I2C Hardware Sensors Chip support -# -# CONFIG_I2C_SENSOR is not set - -# -# Mice -# -# CONFIG_BUSMOUSE is not set -# CONFIG_QIC02_TAPE is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_HANGCHECK_TIMER is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=y -# CONFIG_JOLIET is not set -# CONFIG_ZISOFS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_FAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_DEVFS_FS=y -# CONFIG_DEVFS_MOUNT is not set -# CONFIG_DEVFS_DEBUG is not set -CONFIG_DEVPTS_FS=y -# CONFIG_DEVPTS_FS_XATTR is not set -CONFIG_TMPFS=y -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -CONFIG_NFSD=y -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_LOCKD=y -CONFIG_EXPORTFS=y -CONFIG_SUNRPC=y -# CONFIG_SUNRPC_GSS is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -CONFIG_SOLARIS_X86_PARTITION=y -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_NEC98_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -# CONFIG_USB is not set -# CONFIG_USB_GADGET is not set - -# -# Bluetooth support -# -# CONFIG_BT is not set - -# -# Library routines -# -# CONFIG_CRC32 is not set - -# -# Kernel hacking -# -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_KALLSYMS is not set - -# -# Security options -# -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set diff --git a/arch/ppc/kernel/head.S b/arch/ppc/kernel/head.S index 100052aaea9a..c7cb9d5f24a3 100644 --- a/arch/ppc/kernel/head.S +++ b/arch/ppc/kernel/head.S @@ -310,12 +310,7 @@ i##n: \ /* System reset */ /* core99 pmac starts the seconary here by changing the vector, and putting it back to what it was (unknown_exception) when done. */ -#if defined(CONFIG_GEMINI) && defined(CONFIG_SMP) - . = 0x100 - b __secondary_start_gemini -#else EXCEPTION(0x100, Reset, unknown_exception, EXC_XFER_STD) -#endif /* Machine check */ . = 0x200 @@ -897,19 +892,6 @@ fix_mem_constants: #endif /* CONFIG_APUS */ #ifdef CONFIG_SMP -#ifdef CONFIG_GEMINI - .globl __secondary_start_gemini -__secondary_start_gemini: - mfspr r4,SPRN_HID0 - ori r4,r4,HID0_ICFI - li r3,0 - ori r3,r3,HID0_ICE - andc r4,r4,r3 - mtspr SPRN_HID0,r4 - sync - b __secondary_start -#endif /* CONFIG_GEMINI */ - .globl __secondary_start_pmac_0 __secondary_start_pmac_0: /* NB the entries for cpus 0, 1, 2 must each occupy 8 bytes. */ diff --git a/arch/ppc/platforms/Makefile b/arch/ppc/platforms/Makefile index 90c622294423..e17fad470621 100644 --- a/arch/ppc/platforms/Makefile +++ b/arch/ppc/platforms/Makefile @@ -13,7 +13,6 @@ obj-$(CONFIG_TQM8260) += tqm8260_setup.o obj-$(CONFIG_CPCI690) += cpci690.o obj-$(CONFIG_EV64260) += ev64260.o obj-$(CONFIG_CHESTNUT) += chestnut.o -obj-$(CONFIG_GEMINI) += gemini_pci.o gemini_setup.o gemini_prom.o obj-$(CONFIG_LOPEC) += lopec.o obj-$(CONFIG_KATANA) += katana.o obj-$(CONFIG_HDPU) += hdpu.o diff --git a/arch/ppc/platforms/gemini.h b/arch/ppc/platforms/gemini.h deleted file mode 100644 index 5528fd0a1216..000000000000 --- a/arch/ppc/platforms/gemini.h +++ /dev/null @@ -1,165 +0,0 @@ -/* - * Onboard registers and descriptions for Synergy Microsystems' - * "Gemini" boards. - * - */ -#ifdef __KERNEL__ -#ifndef __PPC_GEMINI_H -#define __PPC_GEMINI_H - -/* Registers */ - -#define GEMINI_SERIAL_B (0xffeffb00) -#define GEMINI_SERIAL_A (0xffeffb08) -#define GEMINI_USWITCH (0xffeffd00) -#define GEMINI_BREV (0xffeffe00) -#define GEMINI_BECO (0xffeffe08) -#define GEMINI_FEAT (0xffeffe10) -#define GEMINI_BSTAT (0xffeffe18) -#define GEMINI_CPUSTAT (0xffeffe20) -#define GEMINI_L2CFG (0xffeffe30) -#define GEMINI_MEMCFG (0xffeffe38) -#define GEMINI_FLROM (0xffeffe40) -#define GEMINI_P0PCI (0xffeffe48) -#define GEMINI_FLWIN (0xffeffe50) -#define GEMINI_P0INTMASK (0xffeffe60) -#define GEMINI_P0INTAP (0xffeffe68) -#define GEMINI_PCIERR (0xffeffe70) -#define GEMINI_LEDBASE (0xffeffe80) -#define GEMINI_RTC (0xffe9fff8) -#define GEMINI_LEDS 8 -#define GEMINI_SWITCHES 8 - - -/* Flash ROM bit definitions */ -#define GEMINI_FLS_WEN (1<<0) -#define GEMINI_FLS_JMP (1<<6) -#define GEMINI_FLS_BOOT (1<<7) - -/* Memory bit definitions */ -#define GEMINI_MEM_TYPE_MASK 0xc0 -#define GEMINI_MEM_SIZE_MASK 0x38 -#define GEMINI_MEM_BANK_MASK 0x07 - -/* L2 cache bit definitions */ -#define GEMINI_L2_SIZE_MASK 0xc0 -#define GEMINI_L2_RATIO_MASK 0x03 - -/* Timebase register bit definitons */ -#define GEMINI_TIMEB0_EN (1<<0) -#define GEMINI_TIMEB1_EN (1<<1) -#define GEMINI_TIMEB2_EN (1<<2) -#define GEMINI_TIMEB3_EN (1<<3) - -/* CPU status bit definitions */ -#define GEMINI_CPU_ID_MASK 0x03 -#define GEMINI_CPU_COUNT_MASK 0x0c -#define GEMINI_CPU0_HALTED (1<<4) -#define GEMINI_CPU1_HALTED (1<<5) -#define GEMINI_CPU2_HALTED (1<<6) -#define GEMINI_CPU3_HALTED (1<<7) - -/* Board status bit definitions */ -#define GEMINI_BRD_FAIL (1<<0) /* FAIL led is lit */ -#define GEMINI_BRD_BUS_MASK 0x0c /* PowerPC bus speed */ - -/* Board family/feature bit descriptions */ -#define GEMINI_FEAT_HAS_FLASH (1<<0) -#define GEMINI_FEAT_HAS_ETH (1<<1) -#define GEMINI_FEAT_HAS_SCSI (1<<2) -#define GEMINI_FEAT_HAS_P0 (1<<3) -#define GEMINI_FEAT_FAM_MASK 0xf0 - -/* Mod/ECO bit definitions */ -#define GEMINI_ECO_LEVEL_MASK 0x0f -#define GEMINI_MOD_MASK 0xf0 - -/* Type/revision bit definitions */ -#define GEMINI_REV_MASK 0x0f -#define GEMINI_TYPE_MASK 0xf0 - -/* User switch definitions */ -#define GEMINI_SWITCH_VERBOSE 1 /* adds "debug" to boot cmd line */ -#define GEMINI_SWITCH_SINGLE_USER 7 /* boots into "single-user" mode */ - -#define SGS_RTC_CONTROL 0 -#define SGS_RTC_SECONDS 1 -#define SGS_RTC_MINUTES 2 -#define SGS_RTC_HOURS 3 -#define SGS_RTC_DAY 4 -#define SGS_RTC_DAY_OF_MONTH 5 -#define SGS_RTC_MONTH 6 -#define SGS_RTC_YEAR 7 - -#define SGS_RTC_SET 0x80 -#define SGS_RTC_IS_STOPPED 0x80 - -#define GRACKLE_CONFIG_ADDR_ADDR (0xfec00000) -#define GRACKLE_CONFIG_DATA_ADDR (0xfee00000) - -#define GEMINI_BOOT_INIT (0xfff00100) - -#ifndef __ASSEMBLY__ - -static inline void grackle_write( unsigned long addr, unsigned long data ) -{ - __asm__ __volatile__( - " stwbrx %1, 0, %0\n \ - sync\n \ - stwbrx %3, 0, %2\n \ - sync " - : /* no output */ - : "r" (GRACKLE_CONFIG_ADDR_ADDR), "r" (addr), - "r" (GRACKLE_CONFIG_DATA_ADDR), "r" (data)); -} - -static inline unsigned long grackle_read( unsigned long addr ) -{ - unsigned long val; - - __asm__ __volatile__( - " stwbrx %1, 0, %2\n \ - sync\n \ - lwbrx %0, 0, %3\n \ - sync " - : "=r" (val) - : "r" (addr), "r" (GRACKLE_CONFIG_ADDR_ADDR), - "r" (GRACKLE_CONFIG_DATA_ADDR)); - - return val; -} - -static inline void gemini_led_on( int led ) -{ - if (led >= 0 && led < GEMINI_LEDS) - *(unsigned char *)(GEMINI_LEDBASE + (led<<3)) = 1; -} - -static inline void gemini_led_off(int led) -{ - if (led >= 0 && led < GEMINI_LEDS) - *(unsigned char *)(GEMINI_LEDBASE + (led<<3)) = 0; -} - -static inline int gemini_led_val(int led) -{ - int val = 0; - if (led >= 0 && led < GEMINI_LEDS) - val = *(unsigned char *)(GEMINI_LEDBASE + (led<<3)); - return (val & 0x1); -} - -/* returns processor id from the board */ -static inline int gemini_processor(void) -{ - unsigned char cpu = *(unsigned char *)(GEMINI_CPUSTAT); - return (int) ((cpu == 0) ? 4 : (cpu & GEMINI_CPU_ID_MASK)); -} - - -extern void _gemini_reboot(void); -extern void gemini_prom_init(void); -extern void gemini_init_l2(void); -#endif /* __ASSEMBLY__ */ -#endif -#endif /* __KERNEL__ */ diff --git a/arch/ppc/platforms/gemini_pci.c b/arch/ppc/platforms/gemini_pci.c deleted file mode 100644 index 95656091ba2b..000000000000 --- a/arch/ppc/platforms/gemini_pci.c +++ /dev/null @@ -1,41 +0,0 @@ -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -void __init gemini_pcibios_fixup(void) -{ - int i; - struct pci_dev *dev = NULL; - - for_each_pci_dev(dev) { - for(i = 0; i < 6; i++) { - if (dev->resource[i].flags & IORESOURCE_IO) { - dev->resource[i].start |= (0xfe << 24); - dev->resource[i].end |= (0xfe << 24); - } - } - } -} - - -/* The "bootloader" for Synergy boards does none of this for us, so we need to - lay it all out ourselves... --Dan */ -void __init gemini_find_bridges(void) -{ - struct pci_controller* hose; - - ppc_md.pcibios_fixup = gemini_pcibios_fixup; - - hose = pcibios_alloc_controller(); - if (!hose) - return; - setup_indirect_pci(hose, 0xfec00000, 0xfee00000); -} diff --git a/arch/ppc/platforms/gemini_prom.S b/arch/ppc/platforms/gemini_prom.S deleted file mode 100644 index e8c84d24f01f..000000000000 --- a/arch/ppc/platforms/gemini_prom.S +++ /dev/null @@ -1,90 +0,0 @@ -/* - * Not really prom support code (yet), but sort of anti-prom code. The current - * bootloader does a number of things it shouldn't and doesn't do things that it - * should. The stuff in here is mainly a hodge-podge collection of setup code - * to get the board up and running. - * ---Dan - */ - -#include -#include -#include -#include - -/* - * On 750's the MMU is on when Linux is booted, so we need to clear out the - * bootloader's BAT settings, make sure we're in supervisor state (gotcha!), - * and turn off the MMU. - * - */ - -_GLOBAL(gemini_prom_init) -#ifdef CONFIG_SMP - /* Since the MMU's on, get stuff in rom space that we'll need */ - lis r4,GEMINI_CPUSTAT@h - ori r4,r4,GEMINI_CPUSTAT@l - lbz r5,0(r4) - andi. r5,r5,3 - mr r24,r5 /* cpu # used later on */ -#endif - mfmsr r4 - li r3,MSR_PR /* ensure supervisor! */ - ori r3,r3,MSR_IR|MSR_DR - andc r4,r4,r3 - mtmsr r4 - isync -#if 0 - /* zero out the bats now that the MMU is off */ -prom_no_mmu: - li r3,0 - mtspr SPRN_IBAT0U,r3 - mtspr SPRN_IBAT0L,r3 - mtspr SPRN_IBAT1U,r3 - mtspr SPRN_IBAT1L,r3 - mtspr SPRN_IBAT2U,r3 - mtspr SPRN_IBAT2L,r3 - mtspr SPRN_IBAT3U,r3 - mtspr SPRN_IBAT3L,r3 - - mtspr SPRN_DBAT0U,r3 - mtspr SPRN_DBAT0L,r3 - mtspr SPRN_DBAT1U,r3 - mtspr SPRN_DBAT1L,r3 - mtspr SPRN_DBAT2U,r3 - mtspr SPRN_DBAT2L,r3 - mtspr SPRN_DBAT3U,r3 - mtspr SPRN_DBAT3L,r3 -#endif - - /* the bootloader (as far as I'm currently aware) doesn't mess with page - tables, but since we're already here, might as well zap these, too */ - li r4,0 - mtspr SPRN_SDR1,r4 - - li r4,16 - mtctr r4 - li r3,0 - li r4,0 -3: mtsrin r3,r4 - addi r3,r3,1 - bdnz 3b - -#ifdef CONFIG_SMP - /* The 750 book (and Mot/IBM support) says that this will "assist" snooping - when in SMP. Not sure yet whether this should stay or leave... */ - mfspr r4,SPRN_HID0 - ori r4,r4,HID0_ABE - mtspr SPRN_HID0,r4 - sync -#endif /* CONFIG_SMP */ - blr - -/* apparently, SMon doesn't pay attention to HID0[SRST]. Disable the MMU and - branch to 0xfff00100 */ -_GLOBAL(_gemini_reboot) - lis r5,GEMINI_BOOT_INIT@h - ori r5,r5,GEMINI_BOOT_INIT@l - li r6,MSR_IP - mtspr SPRN_SRR0,r5 - mtspr SPRN_SRR1,r6 - rfi diff --git a/arch/ppc/platforms/gemini_serial.h b/arch/ppc/platforms/gemini_serial.h deleted file mode 100644 index b915eff79fdb..000000000000 --- a/arch/ppc/platforms/gemini_serial.h +++ /dev/null @@ -1,40 +0,0 @@ -#ifdef __KERNEL__ -#ifndef __ASMPPC_GEMINI_SERIAL_H -#define __ASMPPC_GEMINI_SERIAL_H - -#include - -#ifdef CONFIG_SERIAL_MANY_PORTS -#define RS_TABLE_SIZE 64 -#else -#define RS_TABLE_SIZE 4 -#endif - -/* Rate for the 24.576 Mhz clock for the onboard serial chip */ -#define BASE_BAUD (24576000 / 16) - -#ifdef CONFIG_SERIAL_DETECT_IRQ -#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST|ASYNC_AUTO_IRQ) -#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_AUTO_IRQ) -#else -#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST) -#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF) -#endif - -#define STD_SERIAL_PORT_DEFNS \ - { 0, BASE_BAUD, GEMINI_SERIAL_A, 15, STD_COM_FLAGS }, /* ttyS0 */ \ - { 0, BASE_BAUD, GEMINI_SERIAL_B, 14, STD_COM_FLAGS }, /* ttyS1 */ \ - -#ifdef CONFIG_GEMINI_PU32 -#define PU32_SERIAL_PORT_DEFNS \ - { 0, BASE_BAUD, NULL, 0, STD_COM_FLAGS }, -#else -#define PU32_SERIAL_PORT_DEFNS -#endif - -#define SERIAL_PORT_DFNS \ - STD_SERIAL_PORT_DEFNS \ - PU32_SERIAL_PORT_DEFNS - -#endif -#endif /* __KERNEL__ */ diff --git a/arch/ppc/platforms/gemini_setup.c b/arch/ppc/platforms/gemini_setup.c deleted file mode 100644 index f48048f362a8..000000000000 --- a/arch/ppc/platforms/gemini_setup.c +++ /dev/null @@ -1,577 +0,0 @@ -/* - * Copyright (C) 1995 Linus Torvalds - * Adapted from 'alpha' version by Gary Thomas - * Modified by Cort Dougan (cort@cs.nmt.edu) - * Synergy Microsystems board support by Dan Cox (dan@synergymicro.com) - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -void gemini_find_bridges(void); -static int gemini_get_clock_speed(void); -extern void gemini_pcibios_fixup(void); - -static char *gemini_board_families[] = { - "VGM", "VSS", "KGM", "VGR", "VCM", "VCS", "KCM", "VCR" -}; -static int gemini_board_count = sizeof(gemini_board_families) / - sizeof(gemini_board_families[0]); - -static unsigned int cpu_7xx[16] = { - 0, 15, 14, 0, 0, 13, 5, 9, 6, 11, 8, 10, 16, 12, 7, 0 -}; -static unsigned int cpu_6xx[16] = { - 0, 0, 14, 0, 0, 13, 5, 9, 6, 11, 8, 10, 0, 12, 7, 0 -}; - -/* - * prom_init is the Gemini version of prom.c:prom_init. We only need - * the BSS clearing code, so I copied that out of prom.c. This is a - * lot simpler than hacking prom.c so it will build with Gemini. -VAL - */ - -#define PTRRELOC(x) ((typeof(x))((unsigned long)(x) + offset)) - -unsigned long -prom_init(void) -{ - unsigned long offset = reloc_offset(); - unsigned long phys; - extern char __bss_start, _end; - - /* First zero the BSS -- use memset, some arches don't have - * caches on yet */ - memset_io(PTRRELOC(&__bss_start),0 , &_end - &__bss_start); - - /* Default */ - phys = offset + KERNELBASE; - - gemini_prom_init(); - - return phys; -} - -int -gemini_show_cpuinfo(struct seq_file *m) -{ - unsigned char reg, rev; - char *family; - unsigned int type; - - reg = readb(GEMINI_FEAT); - family = gemini_board_families[((reg>>4) & 0xf)]; - if (((reg>>4) & 0xf) > gemini_board_count) - printk(KERN_ERR "cpuinfo(): unable to determine board family\n"); - - reg = readb(GEMINI_BREV); - type = (reg>>4) & 0xf; - rev = reg & 0xf; - - reg = readb(GEMINI_BECO); - - seq_printf(m, "machine\t\t: Gemini %s%d, rev %c, eco %d\n", - family, type, (rev + 'A'), (reg & 0xf)); - - seq_printf(m, "board\t\t: Gemini %s", family); - if (type > 9) - seq_printf(m, "%c", (type - 10) + 'A'); - else - seq_printf(m, "%d", type); - - seq_printf(m, ", rev %c, eco %d\n", (rev + 'A'), (reg & 0xf)); - - seq_printf(m, "clock\t\t: %dMhz\n", gemini_get_clock_speed()); - - return 0; -} - -static u_char gemini_openpic_initsenses[] = { - 1, - 1, - 1, - 1, - 0, - 0, - 1, /* remainder are level-triggered */ -}; - -#define GEMINI_MPIC_ADDR (0xfcfc0000) -#define GEMINI_MPIC_PCI_CFG (0x80005800) - -void __init gemini_openpic_init(void) -{ - - OpenPIC_Addr = (volatile struct OpenPIC *) - grackle_read(GEMINI_MPIC_PCI_CFG + 0x10); - OpenPIC_InitSenses = gemini_openpic_initsenses; - OpenPIC_NumInitSenses = sizeof( gemini_openpic_initsenses ); - - ioremap( GEMINI_MPIC_ADDR, OPENPIC_SIZE); -} - - -extern unsigned long loops_per_jiffy; -extern int root_mountflags; -extern char cmd_line[]; - -void -gemini_heartbeat(void) -{ - static unsigned long led = GEMINI_LEDBASE+(4*8); - static char direction = 8; - - - /* We only want to do this on 1 CPU */ - if (smp_processor_id()) - return; - *(char *)led = 0; - if ( (led + direction) > (GEMINI_LEDBASE+(7*8)) || - (led + direction) < (GEMINI_LEDBASE+(4*8)) ) - direction *= -1; - led += direction; - *(char *)led = 0xff; - ppc_md.heartbeat_count = ppc_md.heartbeat_reset; -} - -void __init gemini_setup_arch(void) -{ - extern char cmd_line[]; - - - loops_per_jiffy = 50000000/HZ; - -#ifdef CONFIG_BLK_DEV_INITRD - /* bootable off CDROM */ - if (initrd_start) - ROOT_DEV = Root_SR0; - else -#endif - ROOT_DEV = Root_SDA1; - - /* nothing but serial consoles... */ - sprintf(cmd_line, "%s console=ttyS0", cmd_line); - - printk("Boot arguments: %s\n", cmd_line); - - ppc_md.heartbeat = gemini_heartbeat; - ppc_md.heartbeat_reset = HZ/8; - ppc_md.heartbeat_count = 1; - - /* Lookup PCI hosts */ - gemini_find_bridges(); - /* take special pains to map the MPIC, since it isn't mapped yet */ - gemini_openpic_init(); - /* start the L2 */ - gemini_init_l2(); -} - - -int -gemini_get_clock_speed(void) -{ - unsigned long hid1, pvr; - int clock; - - pvr = mfspr(SPRN_PVR); - hid1 = (mfspr(SPRN_HID1) >> 28) & 0xf; - if (PVR_VER(pvr) == 8 || - PVR_VER(pvr) == 12) - hid1 = cpu_7xx[hid1]; - else - hid1 = cpu_6xx[hid1]; - - switch((readb(GEMINI_BSTAT) & 0xc) >> 2) { - - case 0: - default: - clock = (hid1*100)/3; - break; - - case 1: - clock = (hid1*125)/3; - break; - - case 2: - clock = (hid1*50); - break; - } - - return clock; -} - -void __init gemini_init_l2(void) -{ - unsigned char reg, brev, fam, creg; - unsigned long cache; - unsigned long pvr; - - reg = readb(GEMINI_L2CFG); - brev = readb(GEMINI_BREV); - fam = readb(GEMINI_FEAT); - pvr = mfspr(SPRN_PVR); - - switch(PVR_VER(pvr)) { - - case 8: - if (reg & 0xc0) - cache = (((reg >> 6) & 0x3) << 28); - else - cache = 0x3 << 28; - -#ifdef CONFIG_SMP - /* Pre-3.0 processor revs had snooping errata. Leave - their L2's disabled with SMP. -- Dan */ - if (PVR_CFG(pvr) < 3) { - printk("Pre-3.0 750; L2 left disabled!\n"); - return; - } -#endif /* CONFIG_SMP */ - - /* Special case: VGM5-B's came before L2 ratios were set on - the board. Processor speed shouldn't be too high, so - set L2 ratio to 1:1.5. */ - if ((brev == 0x51) && ((fam & 0xa0) >> 4) == 0) - reg |= 1; - - /* determine best cache ratio based upon what the board - tells us (which sometimes _may_ not be true) and - the processor speed. */ - else { - if (gemini_get_clock_speed() > 250) - reg = 2; - } - break; - case 12: - { - static unsigned long l2_size_val = 0; - - if (!l2_size_val) - l2_size_val = _get_L2CR(); - cache = l2_size_val; - break; - } - case 4: - case 9: - creg = readb(GEMINI_CPUSTAT); - if (((creg & 0xc) >> 2) != 1) - printk("Dual-604 boards don't support the use of L2\n"); - else - writeb(1, GEMINI_L2CFG); - return; - default: - printk("Unknown processor; L2 left disabled\n"); - return; - } - - cache |= ((1<>2)&0x3) { - case 0: - default: - freq = 66667; - break; - case 1: - freq = 83000; - break; - case 2: - freq = 100000; - break; - } - - freq *= 1000; - divisor = 4; - tb_ticks_per_jiffy = freq / HZ / divisor; - tb_to_us = mulhwu_scale_factor(freq/divisor, 1000000); -} - -unsigned long __init gemini_find_end_of_memory(void) -{ - unsigned long total; - unsigned char reg; - - reg = readb(GEMINI_MEMCFG); - total = ((1<<((reg & 0x7) - 1)) * - (8<<((reg >> 3) & 0x7))); - total *= (1024*1024); - return total; -} - -static void __init -gemini_map_io(void) -{ - io_block_mapping(0xf0000000, 0xf0000000, 0x10000000, _PAGE_IO); - io_block_mapping(0x80000000, 0x80000000, 0x10000000, _PAGE_IO); -} - -#ifdef CONFIG_SMP -static int -smp_gemini_probe(void) -{ - int i, nr; - - nr = (readb(GEMINI_CPUSTAT) & GEMINI_CPU_COUNT_MASK) >> 2; - if (nr == 0) - nr = 4; - - if (nr > 1) { - openpic_request_IPIs(); - for (i = 1; i < nr; ++i) - smp_hw_index[i] = i; - } - - return nr; -} - -static void -smp_gemini_kick_cpu(int nr) -{ - openpic_reset_processor_phys(1 << nr); - openpic_reset_processor_phys(0); -} - -static void -smp_gemini_setup_cpu(int cpu_nr) -{ - if (OpenPIC_Addr) - do_openpic_setup_cpu(); - if (cpu_nr > 0) - gemini_init_l2(); -} - -static struct smp_ops_t gemini_smp_ops = { - smp_openpic_message_pass, - smp_gemini_probe, - smp_gemini_kick_cpu, - smp_gemini_setup_cpu, - .give_timebase = smp_generic_give_timebase, - .take_timebase = smp_generic_take_timebase, -}; -#endif /* CONFIG_SMP */ - -void __init platform_init(unsigned long r3, unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7) -{ - int i; - - /* Restore BATs for now */ - mtspr(SPRN_DBAT3U, 0xf0001fff); - mtspr(SPRN_DBAT3L, 0xf000002a); - - parse_bootinfo(find_bootinfo()); - - for(i = 0; i < GEMINI_LEDS; i++) - gemini_led_off(i); - - ISA_DMA_THRESHOLD = 0; - DMA_MODE_READ = 0; - DMA_MODE_WRITE = 0; - -#ifdef CONFIG_BLK_DEV_INITRD - if ( r4 ) - { - initrd_start = r4 + KERNELBASE; - initrd_end = r5 + KERNELBASE; - } -#endif - - ppc_md.setup_arch = gemini_setup_arch; - ppc_md.show_cpuinfo = gemini_show_cpuinfo; - ppc_md.init_IRQ = gemini_init_IRQ; - ppc_md.get_irq = openpic_get_irq; - ppc_md.init = NULL; - - ppc_md.restart = gemini_restart; - ppc_md.power_off = gemini_power_off; - ppc_md.halt = gemini_halt; - - ppc_md.time_init = gemini_time_init; - ppc_md.set_rtc_time = gemini_set_rtc_time; - ppc_md.get_rtc_time = gemini_get_rtc_time; - ppc_md.calibrate_decr = gemini_calibrate_decr; - - ppc_md.find_end_of_memory = gemini_find_end_of_memory; - ppc_md.setup_io_mappings = gemini_map_io; - - ppc_md.pcibios_fixup_bus = gemini_pcibios_fixup; - -#ifdef CONFIG_SMP - smp_ops = &gemini_smp_ops; -#endif /* CONFIG_SMP */ -} diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile index dca23f2ef851..d84f04666972 100644 --- a/arch/ppc/syslib/Makefile +++ b/arch/ppc/syslib/Makefile @@ -45,7 +45,6 @@ obj-$(CONFIG_EBONY) += pci_auto.o todc_time.o obj-$(CONFIG_EV64260) += todc_time.o pci_auto.o obj-$(CONFIG_EV64360) += todc_time.o obj-$(CONFIG_CHESTNUT) += mv64360_pic.o pci_auto.o -obj-$(CONFIG_GEMINI) += open_pic.o obj-$(CONFIG_GT64260) += gt64260_pic.o obj-$(CONFIG_LOPEC) += pci_auto.o todc_time.o obj-$(CONFIG_HDPU) += pci_auto.o diff --git a/arch/ppc/xmon/start.c b/arch/ppc/xmon/start.c index d74a883e5bde..8f0b953179fa 100644 --- a/arch/ppc/xmon/start.c +++ b/arch/ppc/xmon/start.c @@ -58,10 +58,7 @@ static struct sysrq_key_op sysrq_xmon_op = void xmon_map_scc(void) { -#if defined(CONFIG_GEMINI) - /* should already be mapped by the kernel boot */ - sccd = (volatile unsigned char *) 0xffeffb08; -#elif defined(CONFIG_405GP) +#if defined(CONFIG_405GP) sccd = (volatile unsigned char *)0xef600300; #elif defined(CONFIG_440EP) sccd = (volatile unsigned char *) ioremap(PPC440EP_UART0_ADDR, 8); -- cgit v1.2.3 From 3650cfe2e51432030e469afd75a429c199c4e42f Mon Sep 17 00:00:00 2001 From: Ishizaki Kou Date: Fri, 12 Jan 2007 09:52:41 +0900 Subject: [POWERPC] spufs: Add SPU register lock spu->register_lock should be held before accessing registers. Signed-off-by: Kou Ishizaki Acked-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/spu_base.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c index bd7bffc3ddd0..c43999a10deb 100644 --- a/arch/powerpc/platforms/cell/spu_base.c +++ b/arch/powerpc/platforms/cell/spu_base.c @@ -170,9 +170,11 @@ int spu_irq_class_0_bottom(struct spu *spu) { unsigned long stat, mask; + unsigned long flags; spu->class_0_pending = 0; + spin_lock_irqsave(&spu->register_lock, flags); mask = spu_int_mask_get(spu, 0); stat = spu_int_stat_get(spu, 0); @@ -188,6 +190,7 @@ spu_irq_class_0_bottom(struct spu *spu) __spu_trap_error(spu); spu_int_stat_clear(spu, 0, stat); + spin_unlock_irqrestore(&spu->register_lock, flags); return (stat & 0x7) ? -EIO : 0; } -- cgit v1.2.3 From d649bd7b766b9c15c9f5f2f6d8ae0e57303285d0 Mon Sep 17 00:00:00 2001 From: Ishizaki Kou Date: Fri, 12 Jan 2007 09:54:39 +0900 Subject: [POWERPC] TLB insertion cleanup This patch changes handling return value of ppc_md.hpte_insert() into the same way as __hash_page_*(). Signed-off-by: Kou Ishizaki Acked-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/mm/hugetlbpage.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index 1bb20d841080..8c77c791f87e 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -1014,7 +1014,6 @@ repeat: /* Primary is full, try the secondary */ if (unlikely(slot == -1)) { - new_pte |= _PAGE_F_SECOND; hpte_group = ((~hash & htab_hash_mask) * HPTES_PER_GROUP) & ~0x7UL; slot = ppc_md.hpte_insert(hpte_group, va, pa, rflags, @@ -1033,7 +1032,7 @@ repeat: if (unlikely(slot == -2)) panic("hash_huge_page: pte_insert failed\n"); - new_pte |= (slot << 12) & _PAGE_F_GIX; + new_pte |= (slot << 12) & (_PAGE_F_SECOND | _PAGE_F_GIX); } /* -- cgit v1.2.3 From ef66f796751a214dc8fadaef2f068c3baa8969fa Mon Sep 17 00:00:00 2001 From: Ishizaki Kou Date: Fri, 12 Jan 2007 09:56:44 +0900 Subject: [POWERPC] Fix oprofile support on Cell LPAR Op_model_cell supports native Cell. By returning -EINVAL, oprofile uses timer interrupt on Cell LPAR. Signed-off-by: Kou Ishizaki Acked-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/oprofile/common.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/oprofile/common.c b/arch/powerpc/oprofile/common.c index b6d82390b6a6..fbd62eacfdf4 100644 --- a/arch/powerpc/oprofile/common.c +++ b/arch/powerpc/oprofile/common.c @@ -149,6 +149,8 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) #ifdef CONFIG_PPC64 #ifdef CONFIG_PPC_CELL_NATIVE case PPC_OPROFILE_CELL: + if (firmware_has_feature(FW_FEATURE_LPAR)) + return -ENODEV; model = &op_model_cell; break; #endif -- cgit v1.2.3 From acc900ef5b6400747e3bafe0017e725b2ba641b8 Mon Sep 17 00:00:00 2001 From: Ishizaki Kou Date: Fri, 12 Jan 2007 09:58:39 +0900 Subject: [POWERPC] Add IRQ remapping hook This patch adds irq remapping hook. On interrupt mechanism on Beat, when an irq outlet which has an id which is formerly used is created, remapping the irq is required. Signed-off-by: Kou Ishizaki Acked-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/irq.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 0bd8c7665834..34dc37e0e369 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -604,6 +604,8 @@ unsigned int irq_create_mapping(struct irq_host *host, */ virq = irq_find_mapping(host, hwirq); if (virq != IRQ_NONE) { + if (host->ops->remap) + host->ops->remap(host, virq, hwirq); pr_debug("irq: -> existing mapping on virq %d\n", virq); return virq; } -- cgit v1.2.3 From ca58b8eb93904453025cab7e01dcad957cf9e25b Mon Sep 17 00:00:00 2001 From: Ishizaki Kou Date: Fri, 12 Jan 2007 09:59:41 +0900 Subject: [POWERPC] Celleb: hypervisor call numbers This patch creates Celleb platform dependent file to define Beat hypervisor call numbers. Signed-off-by: Kou Ishizaki Acked-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/celleb/beat_syscall.h | 160 +++++++++++++++++++++++++++ 1 file changed, 160 insertions(+) create mode 100644 arch/powerpc/platforms/celleb/beat_syscall.h (limited to 'arch') diff --git a/arch/powerpc/platforms/celleb/beat_syscall.h b/arch/powerpc/platforms/celleb/beat_syscall.h new file mode 100644 index 000000000000..14e16974773f --- /dev/null +++ b/arch/powerpc/platforms/celleb/beat_syscall.h @@ -0,0 +1,160 @@ +/* + * Beat hypervisor call numbers + * + * (C) Copyright 2004-2007 TOSHIBA CORPORATION + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef BEAT_BEAT_syscall_H +#define BEAT_BEAT_syscall_H + +#ifdef __ASSEMBLY__ +#define __BEAT_ADD_VENDOR_ID(__x, __v) ((__v)<<60|(__x)) +#else +#define __BEAT_ADD_VENDOR_ID(__x, __v) ((u64)(__v)<<60|(__x)) +#endif +#define HV_allocate_memory __BEAT_ADD_VENDOR_ID(0, 0) +#define HV_construct_virtual_address_space __BEAT_ADD_VENDOR_ID(2, 0) +#define HV_destruct_virtual_address_space __BEAT_ADD_VENDOR_ID(10, 0) +#define HV_get_virtual_address_space_id_of_ppe __BEAT_ADD_VENDOR_ID(4, 0) +#define HV_query_logical_partition_address_region_info \ + __BEAT_ADD_VENDOR_ID(6, 0) +#define HV_release_memory __BEAT_ADD_VENDOR_ID(13, 0) +#define HV_select_virtual_address_space __BEAT_ADD_VENDOR_ID(7, 0) +#define HV_load_range_registers __BEAT_ADD_VENDOR_ID(68, 0) +#define HV_set_ppe_l2cache_rmt_entry __BEAT_ADD_VENDOR_ID(70, 0) +#define HV_set_ppe_tlb_rmt_entry __BEAT_ADD_VENDOR_ID(71, 0) +#define HV_set_spe_tlb_rmt_entry __BEAT_ADD_VENDOR_ID(72, 0) +#define HV_get_io_address_translation_fault_info __BEAT_ADD_VENDOR_ID(14, 0) +#define HV_get_iopte __BEAT_ADD_VENDOR_ID(16, 0) +#define HV_preload_iopt_cache __BEAT_ADD_VENDOR_ID(17, 0) +#define HV_put_iopte __BEAT_ADD_VENDOR_ID(15, 0) +#define HV_connect_event_ports __BEAT_ADD_VENDOR_ID(21, 0) +#define HV_construct_event_receive_port __BEAT_ADD_VENDOR_ID(18, 0) +#define HV_destruct_event_receive_port __BEAT_ADD_VENDOR_ID(19, 0) +#define HV_destruct_event_send_port __BEAT_ADD_VENDOR_ID(22, 0) +#define HV_get_state_of_event_send_port __BEAT_ADD_VENDOR_ID(25, 0) +#define HV_request_to_connect_event_ports __BEAT_ADD_VENDOR_ID(20, 0) +#define HV_send_event_externally __BEAT_ADD_VENDOR_ID(23, 0) +#define HV_send_event_locally __BEAT_ADD_VENDOR_ID(24, 0) +#define HV_construct_and_connect_irq_plug __BEAT_ADD_VENDOR_ID(28, 0) +#define HV_destruct_irq_plug __BEAT_ADD_VENDOR_ID(29, 0) +#define HV_detect_pending_interrupts __BEAT_ADD_VENDOR_ID(26, 0) +#define HV_end_of_interrupt __BEAT_ADD_VENDOR_ID(27, 0) +#define HV_assign_control_signal_notification_port __BEAT_ADD_VENDOR_ID(45, 0) +#define HV_end_of_control_signal_processing __BEAT_ADD_VENDOR_ID(48, 0) +#define HV_get_control_signal __BEAT_ADD_VENDOR_ID(46, 0) +#define HV_set_irq_mask_for_spe __BEAT_ADD_VENDOR_ID(61, 0) +#define HV_shutdown_logical_partition __BEAT_ADD_VENDOR_ID(44, 0) +#define HV_connect_message_ports __BEAT_ADD_VENDOR_ID(35, 0) +#define HV_destruct_message_port __BEAT_ADD_VENDOR_ID(36, 0) +#define HV_receive_message __BEAT_ADD_VENDOR_ID(37, 0) +#define HV_get_message_port_info __BEAT_ADD_VENDOR_ID(34, 0) +#define HV_request_to_connect_message_ports __BEAT_ADD_VENDOR_ID(33, 0) +#define HV_send_message __BEAT_ADD_VENDOR_ID(32, 0) +#define HV_get_logical_ppe_id __BEAT_ADD_VENDOR_ID(69, 0) +#define HV_pause __BEAT_ADD_VENDOR_ID(9, 0) +#define HV_destruct_shared_memory_handle __BEAT_ADD_VENDOR_ID(51, 0) +#define HV_get_shared_memory_info __BEAT_ADD_VENDOR_ID(52, 0) +#define HV_permit_sharing_memory __BEAT_ADD_VENDOR_ID(50, 0) +#define HV_request_to_attach_shared_memory __BEAT_ADD_VENDOR_ID(49, 0) +#define HV_enable_logical_spe_execution __BEAT_ADD_VENDOR_ID(55, 0) +#define HV_construct_logical_spe __BEAT_ADD_VENDOR_ID(53, 0) +#define HV_disable_logical_spe_execution __BEAT_ADD_VENDOR_ID(56, 0) +#define HV_destruct_logical_spe __BEAT_ADD_VENDOR_ID(54, 0) +#define HV_sense_spe_execution_status __BEAT_ADD_VENDOR_ID(58, 0) +#define HV_insert_htab_entry __BEAT_ADD_VENDOR_ID(101, 0) +#define HV_read_htab_entries __BEAT_ADD_VENDOR_ID(95, 0) +#define HV_write_htab_entry __BEAT_ADD_VENDOR_ID(94, 0) +#define HV_assign_io_address_translation_fault_port \ + __BEAT_ADD_VENDOR_ID(100, 0) +#define HV_set_interrupt_mask __BEAT_ADD_VENDOR_ID(73, 0) +#define HV_get_logical_partition_id __BEAT_ADD_VENDOR_ID(74, 0) +#define HV_create_repository_node2 __BEAT_ADD_VENDOR_ID(90, 0) +#define HV_create_repository_node __BEAT_ADD_VENDOR_ID(90, 0) /* alias */ +#define HV_get_repository_node_value2 __BEAT_ADD_VENDOR_ID(91, 0) +#define HV_get_repository_node_value __BEAT_ADD_VENDOR_ID(91, 0) /* alias */ +#define HV_modify_repository_node_value2 __BEAT_ADD_VENDOR_ID(92, 0) +#define HV_modify_repository_node_value __BEAT_ADD_VENDOR_ID(92, 0) /* alias */ +#define HV_remove_repository_node2 __BEAT_ADD_VENDOR_ID(93, 0) +#define HV_remove_repository_node __BEAT_ADD_VENDOR_ID(93, 0) /* alias */ +#define HV_cancel_shared_memory __BEAT_ADD_VENDOR_ID(104, 0) +#define HV_clear_interrupt_status_of_spe __BEAT_ADD_VENDOR_ID(206, 0) +#define HV_construct_spe_irq_outlet __BEAT_ADD_VENDOR_ID(80, 0) +#define HV_destruct_spe_irq_outlet __BEAT_ADD_VENDOR_ID(81, 0) +#define HV_disconnect_ipspc_service __BEAT_ADD_VENDOR_ID(88, 0) +#define HV_execute_ipspc_command __BEAT_ADD_VENDOR_ID(86, 0) +#define HV_get_interrupt_status_of_spe __BEAT_ADD_VENDOR_ID(205, 0) +#define HV_get_spe_privileged_state_1_registers __BEAT_ADD_VENDOR_ID(208, 0) +#define HV_permit_use_of_ipspc_service __BEAT_ADD_VENDOR_ID(85, 0) +#define HV_reinitialize_logical_spe __BEAT_ADD_VENDOR_ID(82, 0) +#define HV_request_ipspc_service __BEAT_ADD_VENDOR_ID(84, 0) +#define HV_stop_ipspc_command __BEAT_ADD_VENDOR_ID(87, 0) +#define HV_set_spe_privileged_state_1_registers __BEAT_ADD_VENDOR_ID(204, 0) +#define HV_get_status_of_ipspc_service __BEAT_ADD_VENDOR_ID(203, 0) +#define HV_put_characters_to_console __BEAT_ADD_VENDOR_ID(0x101, 1) +#define HV_get_characters_from_console __BEAT_ADD_VENDOR_ID(0x102, 1) +#define HV_get_base_clock __BEAT_ADD_VENDOR_ID(0x111, 1) +#define HV_set_base_clock __BEAT_ADD_VENDOR_ID(0x112, 1) +#define HV_get_frame_cycle __BEAT_ADD_VENDOR_ID(0x114, 1) +#define HV_disable_console __BEAT_ADD_VENDOR_ID(0x115, 1) +#define HV_disable_all_console __BEAT_ADD_VENDOR_ID(0x116, 1) +#define HV_oneshot_timer __BEAT_ADD_VENDOR_ID(0x117, 1) +#define HV_set_dabr __BEAT_ADD_VENDOR_ID(0x118, 1) +#define HV_get_dabr __BEAT_ADD_VENDOR_ID(0x119, 1) +#define HV_start_hv_stats __BEAT_ADD_VENDOR_ID(0x21c, 1) +#define HV_stop_hv_stats __BEAT_ADD_VENDOR_ID(0x21d, 1) +#define HV_get_hv_stats __BEAT_ADD_VENDOR_ID(0x21e, 1) +#define HV_get_hv_error_stats __BEAT_ADD_VENDOR_ID(0x221, 1) +#define HV_get_stats __BEAT_ADD_VENDOR_ID(0x224, 1) +#define HV_get_heap_stats __BEAT_ADD_VENDOR_ID(0x225, 1) +#define HV_get_memory_stats __BEAT_ADD_VENDOR_ID(0x227, 1) +#define HV_get_memory_detail __BEAT_ADD_VENDOR_ID(0x228, 1) +#define HV_set_priority_of_irq_outlet __BEAT_ADD_VENDOR_ID(0x122, 1) +#define HV_get_physical_spe_by_reservation_id __BEAT_ADD_VENDOR_ID(0x128, 1) +#define HV_get_spe_context __BEAT_ADD_VENDOR_ID(0x129, 1) +#define HV_set_spe_context __BEAT_ADD_VENDOR_ID(0x12a, 1) +#define HV_downcount_of_interrupt __BEAT_ADD_VENDOR_ID(0x12e, 1) +#define HV_peek_spe_context __BEAT_ADD_VENDOR_ID(0x12f, 1) +#define HV_read_bpa_register __BEAT_ADD_VENDOR_ID(0x131, 1) +#define HV_write_bpa_register __BEAT_ADD_VENDOR_ID(0x132, 1) +#define HV_map_context_table_of_spe __BEAT_ADD_VENDOR_ID(0x137, 1) +#define HV_get_slb_for_logical_spe __BEAT_ADD_VENDOR_ID(0x138, 1) +#define HV_set_slb_for_logical_spe __BEAT_ADD_VENDOR_ID(0x139, 1) +#define HV_init_pm __BEAT_ADD_VENDOR_ID(0x150, 1) +#define HV_set_pm_signal __BEAT_ADD_VENDOR_ID(0x151, 1) +#define HV_get_pm_signal __BEAT_ADD_VENDOR_ID(0x152, 1) +#define HV_set_pm_config __BEAT_ADD_VENDOR_ID(0x153, 1) +#define HV_get_pm_config __BEAT_ADD_VENDOR_ID(0x154, 1) +#define HV_get_inner_trace_data __BEAT_ADD_VENDOR_ID(0x155, 1) +#define HV_set_ext_trace_buffer __BEAT_ADD_VENDOR_ID(0x156, 1) +#define HV_get_ext_trace_buffer __BEAT_ADD_VENDOR_ID(0x157, 1) +#define HV_set_pm_interrupt __BEAT_ADD_VENDOR_ID(0x158, 1) +#define HV_get_pm_interrupt __BEAT_ADD_VENDOR_ID(0x159, 1) +#define HV_kick_pm __BEAT_ADD_VENDOR_ID(0x160, 1) +#define HV_construct_pm_context __BEAT_ADD_VENDOR_ID(0x164, 1) +#define HV_destruct_pm_context __BEAT_ADD_VENDOR_ID(0x165, 1) +#define HV_be_slow __BEAT_ADD_VENDOR_ID(0x170, 1) +#define HV_assign_ipspc_server_connection_status_notification_port \ + __BEAT_ADD_VENDOR_ID(0x173, 1) +#define HV_get_raid_of_physical_spe __BEAT_ADD_VENDOR_ID(0x174, 1) +#define HV_set_physical_spe_to_rag __BEAT_ADD_VENDOR_ID(0x175, 1) +#define HV_release_physical_spe_from_rag __BEAT_ADD_VENDOR_ID(0x176, 1) +#define HV_rtc_read __BEAT_ADD_VENDOR_ID(0x190, 1) +#define HV_rtc_write __BEAT_ADD_VENDOR_ID(0x191, 1) +#define HV_eeprom_read __BEAT_ADD_VENDOR_ID(0x192, 1) +#define HV_eeprom_write __BEAT_ADD_VENDOR_ID(0x193, 1) +#endif -- cgit v1.2.3 From 983e3f6027374bc8b63f05422d281e0d1f2c37f7 Mon Sep 17 00:00:00 2001 From: Ishizaki Kou Date: Fri, 12 Jan 2007 10:02:36 +0900 Subject: [POWERPC] Celleb: Cell SCC definitions Adds Cell SCC(Super Companion Chip) definitions. Signed-off-by: Kou Ishizaki Acked-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/celleb/scc.h | 145 ++++++++++++++++++++++++++++++++++++ 1 file changed, 145 insertions(+) create mode 100644 arch/powerpc/platforms/celleb/scc.h (limited to 'arch') diff --git a/arch/powerpc/platforms/celleb/scc.h b/arch/powerpc/platforms/celleb/scc.h new file mode 100644 index 000000000000..e9ce8a7c1882 --- /dev/null +++ b/arch/powerpc/platforms/celleb/scc.h @@ -0,0 +1,145 @@ +/* + * SCC (Super Companion Chip) definitions + * + * (C) Copyright 2004-2006 TOSHIBA CORPORATION + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef _CELLEB_SCC_H +#define _CELLEB_SCC_H + +#define PCI_VENDOR_ID_TOSHIBA_2 0x102f +#define PCI_DEVICE_ID_TOSHIBA_SCC_PCIEXC_BRIDGE 0x01b0 +#define PCI_DEVICE_ID_TOSHIBA_SCC_EPCI_BRIDGE 0x01b1 +#define PCI_DEVICE_ID_TOSHIBA_SCC_BRIDGE 0x01b2 +#define PCI_DEVICE_ID_TOSHIBA_SCC_GBE 0x01b3 +#define PCI_DEVICE_ID_TOSHIBA_SCC_ATA 0x01b4 +#define PCI_DEVICE_ID_TOSHIBA_SCC_USB2 0x01b5 +#define PCI_DEVICE_ID_TOSHIBA_SCC_USB 0x01b6 +#define PCI_DEVICE_ID_TOSHIBA_SCC_ENCDEC 0x01b7 + +#define SCC_EPCI_REG 0x0000d000 + +/* EPCI registers */ +#define SCC_EPCI_CNF10_REG 0x010 +#define SCC_EPCI_CNF14_REG 0x014 +#define SCC_EPCI_CNF18_REG 0x018 +#define SCC_EPCI_PVBAT 0x100 +#define SCC_EPCI_VPMBAT 0x104 +#define SCC_EPCI_VPIBAT 0x108 +#define SCC_EPCI_VCSR 0x110 +#define SCC_EPCI_VIENAB 0x114 +#define SCC_EPCI_VISTAT 0x118 +#define SCC_EPCI_VRDCOUNT 0x124 +#define SCC_EPCI_BAM0 0x12c +#define SCC_EPCI_BAM1 0x134 +#define SCC_EPCI_BAM2 0x13c +#define SCC_EPCI_IADR 0x164 +#define SCC_EPCI_CLKRST 0x800 +#define SCC_EPCI_INTSET 0x804 +#define SCC_EPCI_STATUS 0x808 +#define SCC_EPCI_ABTSET 0x80c +#define SCC_EPCI_WATRP 0x810 +#define SCC_EPCI_DUMMYRADR 0x814 +#define SCC_EPCI_SWRESP 0x818 +#define SCC_EPCI_CNTOPT 0x81c +#define SCC_EPCI_ECMODE 0xf00 +#define SCC_EPCI_IOM_AC_NUM 5 +#define SCC_EPCI_IOM_ACTE(n) (0xf10 + (n) * 4) +#define SCC_EPCI_IOT_AC_NUM 4 +#define SCC_EPCI_IOT_ACTE(n) (0xf30 + (n) * 4) +#define SCC_EPCI_MAEA 0xf50 +#define SCC_EPCI_MAEC 0xf54 +#define SCC_EPCI_CKCTRL 0xff0 + +/* bits for SCC_EPCI_VCSR */ +#define SCC_EPCI_VCSR_FRE 0x00020000 +#define SCC_EPCI_VCSR_FWE 0x00010000 +#define SCC_EPCI_VCSR_DR 0x00000400 +#define SCC_EPCI_VCSR_SR 0x00000008 +#define SCC_EPCI_VCSR_AT 0x00000004 + +/* bits for SCC_EPCI_VIENAB/SCC_EPCI_VISTAT */ +#define SCC_EPCI_VISTAT_PMPE 0x00000008 +#define SCC_EPCI_VISTAT_PMFE 0x00000004 +#define SCC_EPCI_VISTAT_PRA 0x00000002 +#define SCC_EPCI_VISTAT_PRD 0x00000001 +#define SCC_EPCI_VISTAT_ALL 0x0000000f + +#define SCC_EPCI_VIENAB_PMPEE 0x00000008 +#define SCC_EPCI_VIENAB_PMFEE 0x00000004 +#define SCC_EPCI_VIENAB_PRA 0x00000002 +#define SCC_EPCI_VIENAB_PRD 0x00000001 +#define SCC_EPCI_VIENAB_ALL 0x0000000f + +/* bits for SCC_EPCI_CLKRST */ +#define SCC_EPCI_CLKRST_CKS_MASK 0x00030000 +#define SCC_EPCI_CLKRST_CKS_2 0x00000000 +#define SCC_EPCI_CLKRST_CKS_4 0x00010000 +#define SCC_EPCI_CLKRST_CKS_8 0x00020000 +#define SCC_EPCI_CLKRST_PCICRST 0x00000400 +#define SCC_EPCI_CLKRST_BC 0x00000200 +#define SCC_EPCI_CLKRST_PCIRST 0x00000100 +#define SCC_EPCI_CLKRST_PCKEN 0x00000001 + +/* bits for SCC_EPCI_INTSET/SCC_EPCI_STATUS */ +#define SCC_EPCI_INT_2M 0x01000000 +#define SCC_EPCI_INT_RERR 0x00200000 +#define SCC_EPCI_INT_SERR 0x00100000 +#define SCC_EPCI_INT_PRTER 0x00080000 +#define SCC_EPCI_INT_SER 0x00040000 +#define SCC_EPCI_INT_PER 0x00020000 +#define SCC_EPCI_INT_PAI 0x00010000 +#define SCC_EPCI_INT_1M 0x00000100 +#define SCC_EPCI_INT_PME 0x00000010 +#define SCC_EPCI_INT_INTD 0x00000008 +#define SCC_EPCI_INT_INTC 0x00000004 +#define SCC_EPCI_INT_INTB 0x00000002 +#define SCC_EPCI_INT_INTA 0x00000001 +#define SCC_EPCI_INT_DEVINT 0x0000000f +#define SCC_EPCI_INT_ALL 0x003f001f +#define SCC_EPCI_INT_ALLERR 0x003f0000 + +/* bits for SCC_EPCI_CKCTRL */ +#define SCC_EPCI_CKCTRL_CRST0 0x00010000 +#define SCC_EPCI_CKCTRL_CRST1 0x00020000 +#define SCC_EPCI_CKCTRL_OCLKEN 0x00000100 +#define SCC_EPCI_CKCTRL_LCLKEN 0x00000001 + +#define SCC_EPCI_IDSEL_AD_TO_SLOT(ad) ((ad) - 10) +#define SCC_EPCI_MAX_DEVNU SCC_EPCI_IDSEL_AD_TO_SLOT(32) + +/* bits for SCC_EPCI_CNTOPT */ +#define SCC_EPCI_CNTOPT_O2PMB 0x00000002 + +/* UHC registers */ +#define SCC_UHC_CKRCTRL 0xff0 +#define SCC_UHC_ECMODE 0xf00 + +/* bits for SCC_UHC_CKRCTRL */ +#define SCC_UHC_F48MCKLEN 0x00000001 +#define SCC_UHC_P_SUSPEND 0x00000002 +#define SCC_UHC_PHY_SUSPEND_SEL 0x00000004 +#define SCC_UHC_HCLKEN 0x00000100 +#define SCC_UHC_USBEN 0x00010000 +#define SCC_UHC_USBCEN 0x00020000 +#define SCC_UHC_PHYEN 0x00040000 + +/* bits for SCC_UHC_ECMODE */ +#define SCC_UHC_ECMODE_BY_BYTE 0x00000555 +#define SCC_UHC_ECMODE_BY_WORD 0x00000aaa + +#endif /* _CELLEB_SCC_H */ -- cgit v1.2.3 From 551a3d87856c67248f9e467a7984865eee4bb0b1 Mon Sep 17 00:00:00 2001 From: Ishizaki Kou Date: Fri, 12 Jan 2007 10:03:28 +0900 Subject: [POWERPC] Celleb: Support PCI bus and base of I/O This patch includes support for pci buses, base of Celleb specific devices, and etc. It works on of_platform bus. Signed-off-by: Kou Ishizaki Acked-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/celleb/pci.c | 481 +++++++++++++++++++++++++++++++ arch/powerpc/platforms/celleb/pci.h | 35 +++ arch/powerpc/platforms/celleb/scc_epci.c | 409 ++++++++++++++++++++++++++ 3 files changed, 925 insertions(+) create mode 100644 arch/powerpc/platforms/celleb/pci.c create mode 100644 arch/powerpc/platforms/celleb/pci.h create mode 100644 arch/powerpc/platforms/celleb/scc_epci.c (limited to 'arch') diff --git a/arch/powerpc/platforms/celleb/pci.c b/arch/powerpc/platforms/celleb/pci.c new file mode 100644 index 000000000000..867f83a7d0c9 --- /dev/null +++ b/arch/powerpc/platforms/celleb/pci.c @@ -0,0 +1,481 @@ +/* + * Support for PCI on Celleb platform. + * + * (C) Copyright 2006-2007 TOSHIBA CORPORATION + * + * This code is based on arch/powerpc/kernel/rtas_pci.c: + * Copyright (C) 2001 Dave Engebretsen, IBM Corporation + * Copyright (C) 2003 Anton Blanchard , IBM + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#undef DEBUG + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include "pci.h" +#include "interrupt.h" + +#define MAX_PCI_DEVICES 32 +#define MAX_PCI_FUNCTIONS 8 +#define MAX_PCI_BASE_ADDRS 3 /* use 64 bit address */ + +/* definition for fake pci configuration area for GbE, .... ,and etc. */ + +struct celleb_pci_resource { + struct resource r[MAX_PCI_BASE_ADDRS]; +}; + +struct celleb_pci_private { + unsigned char *fake_config[MAX_PCI_DEVICES][MAX_PCI_FUNCTIONS]; + struct celleb_pci_resource *res[MAX_PCI_DEVICES][MAX_PCI_FUNCTIONS]; +}; + +static inline u8 celleb_fake_config_readb(void *addr) +{ + u8 *p = addr; + return *p; +} + +static inline u16 celleb_fake_config_readw(void *addr) +{ + u16 *p = addr; + return le16_to_cpu(*p); +} + +static inline u32 celleb_fake_config_readl(void *addr) +{ + u32 *p = addr; + return le32_to_cpu(*p); +} + +static inline void celleb_fake_config_writeb(u32 val, void *addr) +{ + u8 *p = addr; + *p = val; +} + +static inline void celleb_fake_config_writew(u32 val, void *addr) +{ + u16 val16; + u16 *p = addr; + val16 = cpu_to_le16(val); + *p = val16; +} + +static inline void celleb_fake_config_writel(u32 val, void *addr) +{ + u32 val32; + u32 *p = addr; + val32 = cpu_to_le32(val); + *p = val32; +} + +static unsigned char *get_fake_config_start(struct pci_controller *hose, + int devno, int fn) +{ + struct celleb_pci_private *private = hose->private_data; + + if (private == NULL) + return NULL; + + return private->fake_config[devno][fn]; +} + +static struct celleb_pci_resource *get_resource_start( + struct pci_controller *hose, + int devno, int fn) +{ + struct celleb_pci_private *private = hose->private_data; + + if (private == NULL) + return NULL; + + return private->res[devno][fn]; +} + + +static void celleb_config_read_fake(unsigned char *config, int where, + int size, u32 *val) +{ + char *p = config + where; + + switch (size) { + case 1: + *val = celleb_fake_config_readb(p); + break; + case 2: + *val = celleb_fake_config_readw(p); + break; + case 4: + *val = celleb_fake_config_readl(p); + break; + } + + return; +} + +static void celleb_config_write_fake(unsigned char *config, int where, + int size, u32 val) +{ + char *p = config + where; + + switch (size) { + case 1: + celleb_fake_config_writeb(val, p); + break; + case 2: + celleb_fake_config_writew(val, p); + break; + case 4: + celleb_fake_config_writel(val, p); + break; + } + return; +} + +static int celleb_fake_pci_read_config(struct pci_bus *bus, + unsigned int devfn, int where, int size, u32 *val) +{ + char *config; + struct device_node *node; + struct pci_controller *hose; + unsigned int devno = devfn >> 3; + unsigned int fn = devfn & 0x7; + + /* allignment check */ + BUG_ON(where % size); + + pr_debug(" fake read: bus=0x%x, ", bus->number); + node = (struct device_node *)bus->sysdata; + hose = pci_find_hose_for_OF_device(node); + config = get_fake_config_start(hose, devno, fn); + + pr_debug("devno=0x%x, where=0x%x, size=0x%x, ", devno, where, size); + if (!config) { + pr_debug("failed\n"); + return PCIBIOS_DEVICE_NOT_FOUND; + } + + celleb_config_read_fake(config, where, size, val); + pr_debug("val=0x%x\n", *val); + + return PCIBIOS_SUCCESSFUL; +} + + +static int celleb_fake_pci_write_config(struct pci_bus *bus, + unsigned int devfn, int where, int size, u32 val) +{ + char *config; + struct device_node *node; + struct pci_controller *hose; + struct celleb_pci_resource *res; + unsigned int devno = devfn >> 3; + unsigned int fn = devfn & 0x7; + + /* allignment check */ + BUG_ON(where % size); + + node = (struct device_node *)bus->sysdata; + hose = pci_find_hose_for_OF_device(node); + config = get_fake_config_start(hose, devno, fn); + + if (!config) + return PCIBIOS_DEVICE_NOT_FOUND; + + if (val == ~0) { + int i = (where - PCI_BASE_ADDRESS_0) >> 3; + + switch (where) { + case PCI_BASE_ADDRESS_0: + case PCI_BASE_ADDRESS_2: + if (size != 4) + return PCIBIOS_DEVICE_NOT_FOUND; + res = get_resource_start(hose, devno, fn); + if (!res) + return PCIBIOS_DEVICE_NOT_FOUND; + celleb_config_write_fake(config, where, size, + (res->r[i].end - res->r[i].start)); + return PCIBIOS_SUCCESSFUL; + case PCI_BASE_ADDRESS_1: + case PCI_BASE_ADDRESS_3: + case PCI_BASE_ADDRESS_4: + case PCI_BASE_ADDRESS_5: + break; + default: + break; + } + } + + celleb_config_write_fake(config, where, size, val); + pr_debug(" fake write: where=%x, size=%d, val=%x\n", + where, size, val); + + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops celleb_fake_pci_ops = { + celleb_fake_pci_read_config, + celleb_fake_pci_write_config +}; + +static inline void celleb_setup_pci_base_addrs(struct pci_controller *hose, + unsigned int devno, unsigned int fn, + unsigned int num_base_addr) +{ + u32 val; + unsigned char *config; + struct celleb_pci_resource *res; + + config = get_fake_config_start(hose, devno, fn); + res = get_resource_start(hose, devno, fn); + + if (!config || !res) + return; + + switch (num_base_addr) { + case 3: + val = (res->r[2].start & 0xfffffff0) + | PCI_BASE_ADDRESS_MEM_TYPE_64; + celleb_config_write_fake(config, PCI_BASE_ADDRESS_4, 4, val); + val = res->r[2].start >> 32; + celleb_config_write_fake(config, PCI_BASE_ADDRESS_5, 4, val); + /* FALLTHROUGH */ + case 2: + val = (res->r[1].start & 0xfffffff0) + | PCI_BASE_ADDRESS_MEM_TYPE_64; + celleb_config_write_fake(config, PCI_BASE_ADDRESS_2, 4, val); + val = res->r[1].start >> 32; + celleb_config_write_fake(config, PCI_BASE_ADDRESS_3, 4, val); + /* FALLTHROUGH */ + case 1: + val = (res->r[0].start & 0xfffffff0) + | PCI_BASE_ADDRESS_MEM_TYPE_64; + celleb_config_write_fake(config, PCI_BASE_ADDRESS_0, 4, val); + val = res->r[0].start >> 32; + celleb_config_write_fake(config, PCI_BASE_ADDRESS_1, 4, val); + break; + } + + val = PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER; + celleb_config_write_fake(config, PCI_COMMAND, 2, val); +} + +static int __devinit celleb_setup_fake_pci_device(struct device_node *node, + struct pci_controller *hose) +{ + unsigned int rlen; + int num_base_addr = 0; + u32 val; + const u32 *wi0, *wi1, *wi2, *wi3, *wi4; + unsigned int devno, fn; + struct celleb_pci_private *private = hose->private_data; + unsigned char **config = NULL; + struct celleb_pci_resource **res = NULL; + const char *name; + const unsigned long *li; + int size, result; + + if (private == NULL) { + printk(KERN_ERR "PCI: " + "memory space for pci controller is not assigned\n"); + goto error; + } + + name = get_property(node, "model", &rlen); + if (!name) { + printk(KERN_ERR "PCI: model property not found.\n"); + goto error; + } + + wi4 = get_property(node, "reg", &rlen); + if (wi4 == NULL) + goto error; + + devno = ((wi4[0] >> 8) & 0xff) >> 3; + fn = (wi4[0] >> 8) & 0x7; + + pr_debug("PCI: celleb_setup_fake_pci() %s devno=%x fn=%x\n", name, + devno, fn); + + size = 256; + config = &private->fake_config[devno][fn]; + if (mem_init_done) + *config = kzalloc(size, GFP_KERNEL); + else + *config = alloc_bootmem(size); + if (*config == NULL) { + printk(KERN_ERR "PCI: " + "not enough memory for fake configuration space\n"); + goto error; + } + pr_debug("PCI: fake config area assigned 0x%016lx\n", + (unsigned long)*config); + + size = sizeof(struct celleb_pci_resource); + res = &private->res[devno][fn]; + if (mem_init_done) + *res = kzalloc(size, GFP_KERNEL); + else + *res = alloc_bootmem(size); + if (*res == NULL) { + printk(KERN_ERR + "PCI: not enough memory for resource data space\n"); + goto error; + } + pr_debug("PCI: res assigned 0x%016lx\n", (unsigned long)*res); + + wi0 = get_property(node, "device-id", NULL); + wi1 = get_property(node, "vendor-id", NULL); + wi2 = get_property(node, "class-code", NULL); + wi3 = get_property(node, "revision-id", NULL); + + celleb_config_write_fake(*config, PCI_DEVICE_ID, 2, wi0[0] & 0xffff); + celleb_config_write_fake(*config, PCI_VENDOR_ID, 2, wi1[0] & 0xffff); + pr_debug("class-code = 0x%08x\n", wi2[0]); + + celleb_config_write_fake(*config, PCI_CLASS_PROG, 1, wi2[0] & 0xff); + celleb_config_write_fake(*config, PCI_CLASS_DEVICE, 2, + (wi2[0] >> 8) & 0xffff); + celleb_config_write_fake(*config, PCI_REVISION_ID, 1, wi3[0]); + + while (num_base_addr < MAX_PCI_BASE_ADDRS) { + result = of_address_to_resource(node, + num_base_addr, &(*res)->r[num_base_addr]); + if (result) + break; + num_base_addr++; + } + + celleb_setup_pci_base_addrs(hose, devno, fn, num_base_addr); + + li = get_property(node, "interrupts", &rlen); + val = li[0]; + celleb_config_write_fake(*config, PCI_INTERRUPT_PIN, 1, 1); + celleb_config_write_fake(*config, PCI_INTERRUPT_LINE, 1, val); + +#ifdef DEBUG + pr_debug("PCI: %s irq=%ld\n", name, li[0]); + for (i = 0; i < 6; i++) { + celleb_config_read_fake(*config, + PCI_BASE_ADDRESS_0 + 0x4 * i, 4, + &val); + pr_debug("PCI: %s fn=%d base_address_%d=0x%x\n", + name, fn, i, val); + } +#endif + + celleb_config_write_fake(*config, PCI_HEADER_TYPE, 1, + PCI_HEADER_TYPE_NORMAL); + + return 0; + +error: + if (mem_init_done) { + if (config && *config) + kfree(*config); + if (res && *res) + kfree(*res); + + } else { + if (config && *config) { + size = 256; + free_bootmem((unsigned long)(*config), size); + } + if (res && *res) { + size = sizeof(struct celleb_pci_resource); + free_bootmem((unsigned long)(*res), size); + } + } + + return 1; +} + +static int __devinit phb_set_bus_ranges(struct device_node *dev, + struct pci_controller *phb) +{ + const int *bus_range; + unsigned int len; + + bus_range = get_property(dev, "bus-range", &len); + if (bus_range == NULL || len < 2 * sizeof(int)) + return 1; + + phb->first_busno = bus_range[0]; + phb->last_busno = bus_range[1]; + + return 0; +} + +static void __devinit celleb_alloc_private_mem(struct pci_controller *hose) +{ + if (mem_init_done) + hose->private_data = + kzalloc(sizeof(struct celleb_pci_private), GFP_KERNEL); + else + hose->private_data = + alloc_bootmem(sizeof(struct celleb_pci_private)); +} + +int __devinit celleb_setup_phb(struct pci_controller *phb) +{ + const char *name; + struct device_node *dev = phb->arch_data; + struct device_node *node; + unsigned int rlen; + + name = get_property(dev, "name", &rlen); + if (!name) + return 1; + + pr_debug("PCI: celleb_setup_phb() %s\n", name); + phb_set_bus_ranges(dev, phb); + + if (strcmp(name, "epci") == 0) { + phb->ops = &celleb_epci_ops; + return celleb_setup_epci(dev, phb); + + } else if (strcmp(name, "pci-pseudo") == 0) { + phb->ops = &celleb_fake_pci_ops; + celleb_alloc_private_mem(phb); + for (node = of_get_next_child(dev, NULL); + node != NULL; node = of_get_next_child(dev, node)) + celleb_setup_fake_pci_device(node, phb); + + } else + return 1; + + return 0; +} + +int celleb_pci_probe_mode(struct pci_bus *bus) +{ + return PCI_PROBE_DEVTREE; +} diff --git a/arch/powerpc/platforms/celleb/pci.h b/arch/powerpc/platforms/celleb/pci.h new file mode 100644 index 000000000000..5340e348e297 --- /dev/null +++ b/arch/powerpc/platforms/celleb/pci.h @@ -0,0 +1,35 @@ +/* + * pci prototypes for Celleb platform + * + * (C) Copyright 2006-2007 TOSHIBA CORPORATION + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef _CELLEB_PCI_H +#define _CELLEB_PCI_H + +#include + +#include +#include + +extern int celleb_setup_phb(struct pci_controller *); +extern int celleb_pci_probe_mode(struct pci_bus *); + +extern struct pci_ops celleb_epci_ops; +extern int celleb_setup_epci(struct device_node *, struct pci_controller *); + +#endif /* _CELLEB_PCI_H */ diff --git a/arch/powerpc/platforms/celleb/scc_epci.c b/arch/powerpc/platforms/celleb/scc_epci.c new file mode 100644 index 000000000000..0edbc0c4f338 --- /dev/null +++ b/arch/powerpc/platforms/celleb/scc_epci.c @@ -0,0 +1,409 @@ +/* + * Support for SCC external PCI + * + * (C) Copyright 2004-2007 TOSHIBA CORPORATION + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#undef DEBUG + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include "scc.h" +#include "pci.h" +#include "interrupt.h" + +#define MAX_PCI_DEVICES 32 +#define MAX_PCI_FUNCTIONS 8 + +#define iob() __asm__ __volatile__("eieio; sync":::"memory") + + +#if 0 /* test code for epci dummy read */ +static void celleb_epci_dummy_read(struct pci_dev *dev) +{ + void *epci_base; + struct device_node *node; + struct pci_controller *hose; + u32 val; + + node = (struct device_node *)dev->bus->sysdata; + hose = pci_find_hose_for_OF_device(node); + + if (!hose) + return; + + epci_base = (void *)hose->cfg_addr; + + val = in_be32(epci_base + SCC_EPCI_WATRP); + iosync(); + + return; +} +#endif + +static inline void clear_and_disable_master_abort_interrupt( + struct pci_controller *hose) +{ + void __iomem *addr; + addr = (void *)hose->cfg_addr + PCI_COMMAND; + out_be32(addr, in_be32(addr) | (PCI_STATUS_REC_MASTER_ABORT << 16)); +} + +static int celleb_epci_check_abort(struct pci_controller *hose, + unsigned long addr) +{ + void __iomem *reg, *epci_base; + u32 val; + + iob(); + epci_base = (void *)hose->cfg_addr; + + reg = epci_base + PCI_COMMAND; + val = in_be32(reg); + + if (val & (PCI_STATUS_REC_MASTER_ABORT << 16)) { + out_be32(reg, + (val & 0xffff) | (PCI_STATUS_REC_MASTER_ABORT << 16)); + + /* clear PCI Controller error, FRE, PMFE */ + reg = epci_base + SCC_EPCI_STATUS; + out_be32(reg, SCC_EPCI_INT_PAI); + + reg = epci_base + SCC_EPCI_VCSR; + val = in_be32(reg) & 0xffff; + val |= SCC_EPCI_VCSR_FRE; + out_be32(reg, val); + + reg = epci_base + SCC_EPCI_VISTAT; + out_be32(reg, SCC_EPCI_VISTAT_PMFE); + return PCIBIOS_DEVICE_NOT_FOUND; + } + + return PCIBIOS_SUCCESSFUL; +} + +static unsigned long celleb_epci_make_config_addr(struct pci_controller *hose, + unsigned int devfn, int where) +{ + unsigned long addr; + struct pci_bus *bus = hose->bus; + + if (bus->self) + addr = (unsigned long)hose->cfg_data + + (((bus->number & 0xff) << 16) + | ((devfn & 0xff) << 8) + | (where & 0xff) + | 0x01000000); + else + addr = (unsigned long)hose->cfg_data + + (((devfn & 0xff) << 8) | (where & 0xff)); + + pr_debug("EPCI: config_addr = 0x%016lx\n", addr); + + return addr; +} + +static int celleb_epci_read_config(struct pci_bus *bus, + unsigned int devfn, int where, int size, u32 * val) +{ + unsigned long addr; + struct device_node *node; + struct pci_controller *hose; + + /* allignment check */ + BUG_ON(where % size); + + node = (struct device_node *)bus->sysdata; + hose = pci_find_hose_for_OF_device(node); + + if (!hose->cfg_data) + return PCIBIOS_DEVICE_NOT_FOUND; + + if (bus->number == hose->first_busno && devfn == 0) { + /* EPCI controller self */ + + addr = (unsigned long)hose->cfg_addr + where; + + switch (size) { + case 1: + *val = in_8((u8 *)addr); + break; + case 2: + *val = in_be16((u16 *)addr); + break; + case 4: + *val = in_be32((u32 *)addr); + break; + default: + return PCIBIOS_DEVICE_NOT_FOUND; + } + + } else { + + clear_and_disable_master_abort_interrupt(hose); + addr = celleb_epci_make_config_addr(hose, devfn, where); + + switch (size) { + case 1: + *val = in_8((u8 *)addr); + break; + case 2: + *val = in_le16((u16 *)addr); + break; + case 4: + *val = in_le32((u32 *)addr); + break; + default: + return PCIBIOS_DEVICE_NOT_FOUND; + } + } + + pr_debug("EPCI: " + "addr=0x%lx, devfn=0x%x, where=0x%x, size=0x%x, val=0x%x\n", + addr, devfn, where, size, *val); + + return celleb_epci_check_abort(hose, 0); +} + +static int celleb_epci_write_config(struct pci_bus *bus, + unsigned int devfn, int where, int size, u32 val) +{ + unsigned long addr; + struct device_node *node; + struct pci_controller *hose; + + /* allignment check */ + BUG_ON(where % size); + + node = (struct device_node *)bus->sysdata; + hose = pci_find_hose_for_OF_device(node); + + if (!hose->cfg_data) + return PCIBIOS_DEVICE_NOT_FOUND; + + if (bus->number == hose->first_busno && devfn == 0) { + /* EPCI controller self */ + + addr = (unsigned long)hose->cfg_addr + where; + + switch (size) { + case 1: + out_8((u8 *)addr, val); + break; + case 2: + out_be16((u16 *)addr, val); + break; + case 4: + out_be32((u32 *)addr, val); + break; + default: + return PCIBIOS_DEVICE_NOT_FOUND; + } + + } else { + + clear_and_disable_master_abort_interrupt(hose); + addr = celleb_epci_make_config_addr(hose, devfn, where); + + switch (size) { + case 1: + out_8((u8 *)addr, val); + break; + case 2: + out_le16((u16 *)addr, val); + break; + case 4: + out_le32((u32 *)addr, val); + break; + default: + return PCIBIOS_DEVICE_NOT_FOUND; + } + } + + return celleb_epci_check_abort(hose, addr); +} + +struct pci_ops celleb_epci_ops = { + celleb_epci_read_config, + celleb_epci_write_config, +}; + +/* to be moved in FW */ +static int __devinit celleb_epci_init(struct pci_controller *hose) +{ + u32 val; + void __iomem *reg, *epci_base; + int hwres = 0; + + epci_base = (void *)hose->cfg_addr; + + /* PCI core reset(Internal bus and PCI clock) */ + reg = epci_base + SCC_EPCI_CKCTRL; + val = in_be32(reg); + if (val == 0x00030101) + hwres = 1; + else { + val &= ~(SCC_EPCI_CKCTRL_CRST0 | SCC_EPCI_CKCTRL_CRST1); + out_be32(reg, val); + + /* set PCI core clock */ + val = in_be32(reg); + val |= (SCC_EPCI_CKCTRL_OCLKEN | SCC_EPCI_CKCTRL_LCLKEN); + out_be32(reg, val); + + /* release PCI core reset (internal bus) */ + val = in_be32(reg); + val |= SCC_EPCI_CKCTRL_CRST0; + out_be32(reg, val); + + /* set PCI clock select */ + reg = epci_base + SCC_EPCI_CLKRST; + val = in_be32(reg); + val &= ~SCC_EPCI_CLKRST_CKS_MASK; + val |= SCC_EPCI_CLKRST_CKS_2; + out_be32(reg, val); + + /* set arbiter */ + reg = epci_base + SCC_EPCI_ABTSET; + out_be32(reg, 0x0f1f001f); /* temporary value */ + + /* buffer on */ + reg = epci_base + SCC_EPCI_CLKRST; + val = in_be32(reg); + val |= SCC_EPCI_CLKRST_BC; + out_be32(reg, val); + + /* PCI clock enable */ + val = in_be32(reg); + val |= SCC_EPCI_CLKRST_PCKEN; + out_be32(reg, val); + + /* release PCI core reset (all) */ + reg = epci_base + SCC_EPCI_CKCTRL; + val = in_be32(reg); + val |= (SCC_EPCI_CKCTRL_CRST0 | SCC_EPCI_CKCTRL_CRST1); + out_be32(reg, val); + + /* set base translation registers. (already set by Beat) */ + + /* set base address masks. (already set by Beat) */ + } + + /* release interrupt masks and clear all interrupts */ + reg = epci_base + SCC_EPCI_INTSET; + out_be32(reg, 0x013f011f); /* all interrupts enable */ + reg = epci_base + SCC_EPCI_VIENAB; + val = SCC_EPCI_VIENAB_PMPEE | SCC_EPCI_VIENAB_PMFEE; + out_be32(reg, val); + reg = epci_base + SCC_EPCI_STATUS; + out_be32(reg, 0xffffffff); + reg = epci_base + SCC_EPCI_VISTAT; + out_be32(reg, 0xffffffff); + + /* disable PCI->IB address translation */ + reg = epci_base + SCC_EPCI_VCSR; + val = in_be32(reg); + val &= ~(SCC_EPCI_VCSR_DR | SCC_EPCI_VCSR_AT); + out_be32(reg, val); + + /* set base addresses. (no need to set?) */ + + /* memory space, bus master enable */ + reg = epci_base + PCI_COMMAND; + val = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER; + out_be32(reg, val); + + /* endian mode setup */ + reg = epci_base + SCC_EPCI_ECMODE; + val = 0x00550155; + out_be32(reg, val); + + /* set control option */ + reg = epci_base + SCC_EPCI_CNTOPT; + val = in_be32(reg); + val |= SCC_EPCI_CNTOPT_O2PMB; + out_be32(reg, val); + + /* XXX: temporay: set registers for address conversion setup */ + reg = epci_base + SCC_EPCI_CNF10_REG; + out_be32(reg, 0x80000008); + reg = epci_base + SCC_EPCI_CNF14_REG; + out_be32(reg, 0x40000008); + + reg = epci_base + SCC_EPCI_BAM0; + out_be32(reg, 0x80000000); + reg = epci_base + SCC_EPCI_BAM1; + out_be32(reg, 0xe0000000); + + reg = epci_base + SCC_EPCI_PVBAT; + out_be32(reg, 0x80000000); + + if (!hwres) { + /* release external PCI reset */ + reg = epci_base + SCC_EPCI_CLKRST; + val = in_be32(reg); + val |= SCC_EPCI_CLKRST_PCIRST; + out_be32(reg, val); + } + + return 0; +} + +int __devinit celleb_setup_epci(struct device_node *node, + struct pci_controller *hose) +{ + struct resource r; + + pr_debug("PCI: celleb_setup_epci()\n"); + + if (of_address_to_resource(node, 0, &r)) + goto error; + hose->cfg_addr = ioremap(r.start, (r.end - r.start + 1)); + if (!hose->cfg_addr) + goto error; + pr_debug("EPCI: cfg_addr map 0x%016lx->0x%016lx + 0x%016lx\n", + r.start, (unsigned long)hose->cfg_addr, + (r.end - r.start + 1)); + + if (of_address_to_resource(node, 2, &r)) + goto error; + hose->cfg_data = ioremap(r.start, (r.end - r.start + 1)); + if (!hose->cfg_data) + goto error; + pr_debug("EPCI: cfg_data map 0x%016lx->0x%016lx + 0x%016lx\n", + r.start, (unsigned long)hose->cfg_data, + (r.end - r.start + 1)); + + celleb_epci_init(hose); + + return 0; + +error: + return 1; +} -- cgit v1.2.3 From 8b629a1f01b2c975074c51c752915ad50ee4e5fc Mon Sep 17 00:00:00 2001 From: Ishizaki Kou Date: Fri, 12 Jan 2007 10:12:06 +0900 Subject: [POWERPC] Celleb: setup sio in SCC This patch setup serial interfaces in SCC to work with serial_txx9 driver. Signed-off-by: Kou Ishizaki Acked-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/celleb/scc_sio.c | 101 ++++++++++++++++++++++++++++++++ 1 file changed, 101 insertions(+) create mode 100644 arch/powerpc/platforms/celleb/scc_sio.c (limited to 'arch') diff --git a/arch/powerpc/platforms/celleb/scc_sio.c b/arch/powerpc/platforms/celleb/scc_sio.c new file mode 100644 index 000000000000..bcd25f54d986 --- /dev/null +++ b/arch/powerpc/platforms/celleb/scc_sio.c @@ -0,0 +1,101 @@ +/* + * setup serial port in SCC + * + * (C) Copyright 2006 TOSHIBA CORPORATION + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include +#include +#include +#include + +#include +#include + +/* sio irq0=0xb00010022 irq0=0xb00010023 irq2=0xb00010024 + mmio=0xfff000-0x1000,0xff2000-0x1000 */ +static int txx9_serial_bitmap = 0; + +static struct { + uint32_t offset; + uint32_t index; +} txx9_scc_tab[3] = { + { 0x300, 0 }, /* 0xFFF300 */ + { 0x400, 0 }, /* 0xFFF400 */ + { 0x800, 1 } /* 0xFF2800 */ +}; + +static int txx9_serial_init(void) +{ + extern int early_serial_txx9_setup(struct uart_port *port); + struct device_node *node; + int i; + struct uart_port req; + struct of_irq irq; + struct resource res; + + node = of_find_node_by_path("/ioif1/sio"); + if (!node) + return 0; + + for(i = 0; i < sizeof(txx9_scc_tab)/sizeof(txx9_scc_tab[0]); i++) { + if (!(txx9_serial_bitmap & (1< Date: Fri, 26 Jan 2007 00:37:11 -0600 Subject: [POWERPC] 83xx: Don't call ioremap in the reset function It's possibly that we get an reset requestion when interrupts are disabled. (For example an oops in an interrupt handler). Therefor, we can't call ioremap in the reset function. Moving the ioremap of the registers we need access to an arch_initcall helps the problem. However we still have a window between boot and the arch_initcall in which the register pointer will not be setup and thus we spin if the reset function is called. If one needs to ensure even this case is covered, look at use of the watchdog provided on 83xx to reset the processor. Signed-off-by: Kumar Gala --- arch/powerpc/platforms/83xx/misc.c | 29 +++++++++++++++++++++-------- 1 file changed, 21 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/83xx/misc.c b/arch/powerpc/platforms/83xx/misc.c index f0c6df61faa9..f01806c940e1 100644 --- a/arch/powerpc/platforms/83xx/misc.c +++ b/arch/powerpc/platforms/83xx/misc.c @@ -18,23 +18,36 @@ #include "mpc83xx.h" +static __be32 __iomem *restart_reg_base; + +static int __init mpc83xx_restart_init(void) +{ + /* map reset restart_reg_baseister space */ + restart_reg_base = ioremap(get_immrbase() + 0x900, 0xff); + + return 0; +} + +arch_initcall(mpc83xx_restart_init); + void mpc83xx_restart(char *cmd) { #define RST_OFFSET 0x00000900 #define RST_PROT_REG 0x00000018 #define RST_CTRL_REG 0x0000001c - __be32 __iomem *reg; - - /* map reset register space */ - reg = ioremap(get_immrbase() + 0x900, 0xff); local_irq_disable(); - /* enable software reset "RSTE" */ - out_be32(reg + (RST_PROT_REG >> 2), 0x52535445); + if (restart_reg_base) { + /* enable software reset "RSTE" */ + out_be32(restart_reg_base + (RST_PROT_REG >> 2), 0x52535445); + + /* set software hard reset */ + out_be32(restart_reg_base + (RST_CTRL_REG >> 2), 0x2); + } else { + printk (KERN_EMERG "Error: Restart registers not mapped, spinning!\n"); + } - /* set software hard reset */ - out_be32(reg + (RST_CTRL_REG >> 2), 0x2); for (;;) ; } -- cgit v1.2.3 From e60bd7f14dbb6239d07676be420a21f8a36d014f Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Fri, 26 Jan 2007 00:41:57 -0600 Subject: [POWERPC] 83xx: Make platform *_init_IRQ() static Make the various 83xx *_init_IRQ() functions static Signed-off-by: Kumar Gala --- arch/powerpc/platforms/83xx/mpc832x_mds.c | 2 +- arch/powerpc/platforms/83xx/mpc834x_itx.c | 2 +- arch/powerpc/platforms/83xx/mpc834x_sys.c | 2 +- arch/powerpc/platforms/83xx/mpc8360e_pb.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.c b/arch/powerpc/platforms/83xx/mpc832x_mds.c index 4d471190be8d..36c75b003891 100644 --- a/arch/powerpc/platforms/83xx/mpc832x_mds.c +++ b/arch/powerpc/platforms/83xx/mpc832x_mds.c @@ -153,7 +153,7 @@ static int __init mpc832x_declare_of_platform_devices(void) } device_initcall(mpc832x_declare_of_platform_devices); -void __init mpc832x_sys_init_IRQ(void) +static void __init mpc832x_sys_init_IRQ(void) { struct device_node *np; diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.c b/arch/powerpc/platforms/83xx/mpc834x_itx.c index 314c42ac6048..2446dea9407e 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_itx.c +++ b/arch/powerpc/platforms/83xx/mpc834x_itx.c @@ -81,7 +81,7 @@ static void __init mpc834x_itx_setup_arch(void) #endif } -void __init mpc834x_itx_init_IRQ(void) +static void __init mpc834x_itx_init_IRQ(void) { struct device_node *np; diff --git a/arch/powerpc/platforms/83xx/mpc834x_sys.c b/arch/powerpc/platforms/83xx/mpc834x_sys.c index 80b735a414d9..f30393f0b832 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_sys.c +++ b/arch/powerpc/platforms/83xx/mpc834x_sys.c @@ -79,7 +79,7 @@ static void __init mpc834x_sys_setup_arch(void) #endif } -void __init mpc834x_sys_init_IRQ(void) +static void __init mpc834x_sys_init_IRQ(void) { struct device_node *np; diff --git a/arch/powerpc/platforms/83xx/mpc8360e_pb.c b/arch/powerpc/platforms/83xx/mpc8360e_pb.c index 53b92a904e8e..832aec4a7443 100644 --- a/arch/powerpc/platforms/83xx/mpc8360e_pb.c +++ b/arch/powerpc/platforms/83xx/mpc8360e_pb.c @@ -158,7 +158,7 @@ static int __init mpc8360_declare_of_platform_devices(void) } device_initcall(mpc8360_declare_of_platform_devices); -void __init mpc8360_sys_init_IRQ(void) +static void __init mpc8360_sys_init_IRQ(void) { struct device_node *np; -- cgit v1.2.3 From 10fccf5fda7529258325769e9da136064b481aab Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Thu, 18 Jan 2007 16:44:24 -0700 Subject: i386: turn on CONFIG_PNP in defconfig I'm trying to remove drivers/acpi/motherboard.c, which is mostly redundant with drivers/pnp/system.c. So make sure that we include the PNP driver in the default config. Most distros enable this already. Turning on CONFIG_PNP also causes the following options to be enabled: CONFIG_PNPACPI CONFIG_SERIAL_8250_PNP CONFIG_SERIAL_8250_PNP causes legacy serial ports to be discovered twice, which is ugly but harmless: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown --- arch/i386/defconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/i386/defconfig b/arch/i386/defconfig index 3265208e5899..77927922dca5 100644 --- a/arch/i386/defconfig +++ b/arch/i386/defconfig @@ -466,7 +466,8 @@ CONFIG_FW_LOADER=y # # Plug and Play support # -# CONFIG_PNP is not set +CONFIG_PNP=y +CONFIG_PNPACPI=y # # Block devices -- cgit v1.2.3 From 126186a055d965d5a7b1ab560e343ef70694f349 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Fri, 26 Jan 2007 01:45:32 -0600 Subject: [POWERPC] 83xx: Return a point to the struct ipic from ipic_init() It's useful to have access to struct ipic handle that just got created in ipic_init(). For example, if we want to setup an external IRQ with out a device node we need access ipic->irqhost to create the virtual to HW IRQ mapping and to set the IRQ sense. With this we can mimic the old sense array concept that existed in arch/ppc. Signed-off-by: Kumar Gala --- arch/powerpc/sysdev/ipic.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/sysdev/ipic.c b/arch/powerpc/sysdev/ipic.c index 522aa14e8f0d..473c415e9e25 100644 --- a/arch/powerpc/sysdev/ipic.c +++ b/arch/powerpc/sysdev/ipic.c @@ -557,8 +557,7 @@ static struct irq_host_ops ipic_host_ops = { .xlate = ipic_host_xlate, }; -void __init ipic_init(struct device_node *node, - unsigned int flags) +struct ipic * __init ipic_init(struct device_node *node, unsigned int flags) { struct ipic *ipic; struct resource res; @@ -566,7 +565,7 @@ void __init ipic_init(struct device_node *node, ipic = alloc_bootmem(sizeof(struct ipic)); if (ipic == NULL) - return; + return NULL; memset(ipic, 0, sizeof(struct ipic)); ipic->of_node = of_node_get(node); @@ -576,12 +575,14 @@ void __init ipic_init(struct device_node *node, &ipic_host_ops, 0); if (ipic->irqhost == NULL) { of_node_put(node); - return; + return NULL; } ret = of_address_to_resource(node, 0, &res); - if (ret) - return; + if (ret) { + of_node_put(node); + return NULL; + } ipic->regs = ioremap(res.start, res.end - res.start + 1); @@ -625,6 +626,8 @@ void __init ipic_init(struct device_node *node, printk ("IPIC (%d IRQ sources) at %p\n", NR_IPIC_INTS, primary_ipic->regs); + + return ipic; } int ipic_set_priority(unsigned int virq, unsigned int priority) -- cgit v1.2.3 From 8943212c97cc56d4dcc853a097740e327fe8a6fe Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Fri, 26 Jan 2007 01:52:27 -0600 Subject: [POWERPC] Remove fastcall function attribute fastcall is an x86 specific function attribute and has no business in ppc code Signed-off-by: Kumar Gala --- arch/powerpc/kernel/iomap.c | 20 ++++++++++---------- arch/powerpc/sysdev/qe_lib/qe_ic.c | 4 ++-- 2 files changed, 12 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/iomap.c b/arch/powerpc/kernel/iomap.c index c68113371050..601ef79a5916 100644 --- a/arch/powerpc/kernel/iomap.c +++ b/arch/powerpc/kernel/iomap.c @@ -12,23 +12,23 @@ * Here comes the ppc64 implementation of the IOMAP * interfaces. */ -unsigned int fastcall ioread8(void __iomem *addr) +unsigned int ioread8(void __iomem *addr) { return readb(addr); } -unsigned int fastcall ioread16(void __iomem *addr) +unsigned int ioread16(void __iomem *addr) { return readw(addr); } -unsigned int fastcall ioread16be(void __iomem *addr) +unsigned int ioread16be(void __iomem *addr) { return in_be16(addr); } -unsigned int fastcall ioread32(void __iomem *addr) +unsigned int ioread32(void __iomem *addr) { return readl(addr); } -unsigned int fastcall ioread32be(void __iomem *addr) +unsigned int ioread32be(void __iomem *addr) { return in_be32(addr); } @@ -38,23 +38,23 @@ EXPORT_SYMBOL(ioread16be); EXPORT_SYMBOL(ioread32); EXPORT_SYMBOL(ioread32be); -void fastcall iowrite8(u8 val, void __iomem *addr) +void iowrite8(u8 val, void __iomem *addr) { writeb(val, addr); } -void fastcall iowrite16(u16 val, void __iomem *addr) +void iowrite16(u16 val, void __iomem *addr) { writew(val, addr); } -void fastcall iowrite16be(u16 val, void __iomem *addr) +void iowrite16be(u16 val, void __iomem *addr) { out_be16(addr, val); } -void fastcall iowrite32(u32 val, void __iomem *addr) +void iowrite32(u32 val, void __iomem *addr) { writel(val, addr); } -void fastcall iowrite32be(u32 val, void __iomem *addr) +void iowrite32be(u32 val, void __iomem *addr) { out_be32(addr, val); } diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.c b/arch/powerpc/sysdev/qe_lib/qe_ic.c index 908568f4dd84..4d1dcb45963d 100644 --- a/arch/powerpc/sysdev/qe_lib/qe_ic.c +++ b/arch/powerpc/sysdev/qe_lib/qe_ic.c @@ -323,7 +323,7 @@ unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic) return irq_linear_revmap(qe_ic->irqhost, irq); } -void fastcall qe_ic_cascade_low(unsigned int irq, struct irq_desc *desc) +void qe_ic_cascade_low(unsigned int irq, struct irq_desc *desc) { struct qe_ic *qe_ic = desc->handler_data; unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic); @@ -332,7 +332,7 @@ void fastcall qe_ic_cascade_low(unsigned int irq, struct irq_desc *desc) generic_handle_irq(cascade_irq); } -void fastcall qe_ic_cascade_high(unsigned int irq, struct irq_desc *desc) +void qe_ic_cascade_high(unsigned int irq, struct irq_desc *desc) { struct qe_ic *qe_ic = desc->handler_data; unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic); -- cgit v1.2.3 From 3b6eb6af5f20471a8cb1b8a3d090401e9a8a2bb8 Mon Sep 17 00:00:00 2001 From: Li Yang Date: Tue, 30 Jan 2007 13:33:01 +0800 Subject: [POWERPC] 83xx: Fix compiler warnings on 836x and 832x Some prototypes are separated from of_device.h into of_platform.h. Add the new include to fix warning. Signed-off-by: Li Yang Signed-off-by: Kumar Gala --- arch/powerpc/platforms/83xx/mpc832x_mds.c | 1 + arch/powerpc/platforms/83xx/mpc8360e_pb.c | 1 + 2 files changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.c b/arch/powerpc/platforms/83xx/mpc832x_mds.c index 36c75b003891..3ecb55f8a6e2 100644 --- a/arch/powerpc/platforms/83xx/mpc832x_mds.c +++ b/arch/powerpc/platforms/83xx/mpc832x_mds.c @@ -25,6 +25,7 @@ #include #include +#include #include #include #include diff --git a/arch/powerpc/platforms/83xx/mpc8360e_pb.c b/arch/powerpc/platforms/83xx/mpc8360e_pb.c index 832aec4a7443..ccce2f9f283d 100644 --- a/arch/powerpc/platforms/83xx/mpc8360e_pb.c +++ b/arch/powerpc/platforms/83xx/mpc8360e_pb.c @@ -31,6 +31,7 @@ #include #include +#include #include #include #include -- cgit v1.2.3 From 304df8f7ef4914ad0886cd1eaa03a12dac583be1 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Tue, 30 Jan 2007 00:45:56 -0600 Subject: [POWERPC] Enable stack debug features on ppc32 Enable stack overflow checking (DEBUG_STACKOVERFLOW) and stack usage (DEBUG_STACK_USAGE) on ppc32. Signed-off-by: Kumar Gala --- arch/powerpc/Kconfig.debug | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug index f0e51edde022..6cb57e0e6b77 100644 --- a/arch/powerpc/Kconfig.debug +++ b/arch/powerpc/Kconfig.debug @@ -4,14 +4,14 @@ source "lib/Kconfig.debug" config DEBUG_STACKOVERFLOW bool "Check for stack overflows" - depends on DEBUG_KERNEL && PPC64 + depends on DEBUG_KERNEL help This option will cause messages to be printed if free stack space drops below a certain limit. config DEBUG_STACK_USAGE bool "Stack utilization instrumentation" - depends on DEBUG_KERNEL && PPC64 + depends on DEBUG_KERNEL help Enables the display of the minimum amount of free stack which each task has ever had available in the sysrq-T and sysrq-P debug output. -- cgit v1.2.3 From a33a9641c924efbb01ee27af969f47218cab6bd7 Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Tue, 30 Jan 2007 16:09:20 -0600 Subject: [POWERPC] 83xx: Add the mpc832xemds defconfig The defconfig for the 8323EMDS is identical to the 8360E MDS defconfig, except CONFIG_MATH_EMULATION is set, since the 8323 doesn't have a FPU. Signed-off-by: Kim Phillips Signed-off-by: Kumar Gala --- arch/powerpc/configs/mpc832xemds_defconfig | 1083 ++++++++++++++++++++++++++++ 1 file changed, 1083 insertions(+) create mode 100644 arch/powerpc/configs/mpc832xemds_defconfig (limited to 'arch') diff --git a/arch/powerpc/configs/mpc832xemds_defconfig b/arch/powerpc/configs/mpc832xemds_defconfig new file mode 100644 index 000000000000..e1b36de6b38c --- /dev/null +++ b/arch/powerpc/configs/mpc832xemds_defconfig @@ -0,0 +1,1083 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.20-rc5 +# Tue Jan 30 14:27:25 2007 +# +# CONFIG_PPC64 is not set +CONFIG_PPC32=y +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +CONFIG_DEFAULT_UIMAGE=y + +# +# Processor support +# +# CONFIG_CLASSIC32 is not set +# CONFIG_PPC_82xx is not set +CONFIG_PPC_83xx=y +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_86xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_8xx is not set +# CONFIG_E200 is not set +CONFIG_6xx=y +CONFIG_83xx=y +CONFIG_PPC_FPU=y +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_PPC_STD_MMU=y +CONFIG_PPC_STD_MMU_32=y +# CONFIG_SMP is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +# CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +# CONFIG_EPOLL is not set +CONFIG_SHMEM=y +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_QUICC_ENGINE=y +CONFIG_PPC_GEN550=y +# CONFIG_WANT_EARLY_SERIAL is not set + +# +# Platform support +# +CONFIG_MPC832x_MDS=y +# CONFIG_MPC834x_SYS is not set +# CONFIG_MPC834x_ITX is not set +# CONFIG_MPC8360E_PB is not set +CONFIG_PPC_MPC832x=y +# CONFIG_MPIC is not set + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_MATH_EMULATION=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_GENERIC_ISA_DMA=y +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_FSL_SOC=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PCIEPORTBUS is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_BOOT_LOAD=0x00800000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=32768 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +# CONFIG_BLK_DEV_SD is not set +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# +# CONFIG_MAC_EMUMOUSEBTN is not set +# CONFIG_WINDFARM is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_NET_PCI is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_GIANFAR is not set +CONFIG_UCC_GETH=y +# CONFIG_UGETH_NAPI is not set +# CONFIG_UGETH_MAGIC_PACKET is not set +# CONFIG_UGETH_FILTERING is not set +# CONFIG_UGETH_TX_ON_DEMOND is not set +# CONFIG_QLA3XXX is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_83xx_WDT=y + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +CONFIG_I2C_MPC=y +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_M41T00 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB is not set +# CONFIG_FB_IBM_GXT4500 is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# HID Devices +# +CONFIG_HID=y + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# Virtualization +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +# CONFIG_MSDOS_PARTITION is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# QE Options +# +CONFIG_UCC_SLOW=y +CONFIG_UCC_FAST=y +CONFIG_UCC=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_IOMAP_COPY=y + +# +# Instrumentation Support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_BOOTX_TEXT is not set +# CONFIG_SERIAL_TEXT_DEBUG is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# -- cgit v1.2.3 From 18a1e4c3ee67680287bf3c455b5047421eda3c14 Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Tue, 30 Jan 2007 16:09:13 -0600 Subject: [POWERPC] 83xx: Add the mpc8323emds.dts Add the mpc8323emds device tree source (dts) Signed-off-by: Scott Wood Signed-off-by: Kim Phillips Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8323emds.dts | 345 ++++++++++++++++++++++++++++++++++ 1 file changed, 345 insertions(+) create mode 100644 arch/powerpc/boot/dts/mpc8323emds.dts (limited to 'arch') diff --git a/arch/powerpc/boot/dts/mpc8323emds.dts b/arch/powerpc/boot/dts/mpc8323emds.dts new file mode 100644 index 000000000000..fa7ef24d205b --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8323emds.dts @@ -0,0 +1,345 @@ +/* + * MPC8323E EMDS Device Tree Source + * + * Copyright 2006 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/ { + model = "MPC8323EMDS"; + compatible = "MPC83xx"; + #address-cells = <1>; + #size-cells = <1>; + linux,phandle = <100>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + linux,phandle = <200>; + + PowerPC,8323@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <4000>; // L1, 16K + i-cache-size = <4000>; // L1, 16K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + 32-bit; + linux,phandle = <201>; + linux,boot-cpu; + }; + }; + + memory { + device_type = "memory"; + linux,phandle = <300>; + reg = <00000000 08000000>; + }; + + bcsr@f8000000 { + device_type = "board-control"; + reg = ; + }; + + soc8323@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 e0000000 00100000>; + reg = ; + bus-frequency = <7DE2900>; + + wdt@200 { + device_type = "watchdog"; + compatible = "mpc83xx_wdt"; + reg = <200 100>; + }; + + i2c@3000 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3000 100>; + interrupts = ; + interrupt-parent = <700>; + dfsrr; + }; + + serial@4500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4500 100>; + clock-frequency = <0>; + interrupts = <9 8>; + interrupt-parent = <700>; + }; + + serial@4600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4600 100>; + clock-frequency = <0>; + interrupts = ; + interrupt-parent = <700>; + }; + + crypto@30000 { + device_type = "crypto"; + model = "SEC2"; + compatible = "talitos"; + reg = <30000 7000>; + interrupts = ; + interrupt-parent = <700>; + /* Rev. 2.2 */ + num-channels = <1>; + channel-fifo-len = <18>; + exec-units-mask = <0000004c>; + descriptor-types-mask = <0122003f>; + }; + + pci@8500 { + linux,phandle = <8500>; + interrupt-map-mask = ; + interrupt-map = < + /* IDSEL 0x11 AD17 */ + 8800 0 0 1 700 14 8 + 8800 0 0 2 700 15 8 + 8800 0 0 3 700 16 8 + 8800 0 0 4 700 17 8 + + /* IDSEL 0x12 AD18 */ + 9000 0 0 1 700 16 8 + 9000 0 0 2 700 17 8 + 9000 0 0 3 700 14 8 + 9000 0 0 4 700 15 8 + + /* IDSEL 0x13 AD19 */ + 9800 0 0 1 700 17 8 + 9800 0 0 2 700 14 8 + 9800 0 0 3 700 15 8 + 9800 0 0 4 700 16 8 + + /* IDSEL 0x15 AD21*/ + a800 0 0 1 700 14 8 + a800 0 0 2 700 15 8 + a800 0 0 3 700 16 8 + a800 0 0 4 700 17 8 + + /* IDSEL 0x16 AD22*/ + b000 0 0 1 700 17 8 + b000 0 0 2 700 14 8 + b000 0 0 3 700 15 8 + b000 0 0 4 700 16 8 + + /* IDSEL 0x17 AD23*/ + b800 0 0 1 700 16 8 + b800 0 0 2 700 17 8 + b800 0 0 3 700 14 8 + b800 0 0 4 700 15 8 + + /* IDSEL 0x18 AD24*/ + c000 0 0 1 700 15 8 + c000 0 0 2 700 16 8 + c000 0 0 3 700 17 8 + c000 0 0 4 700 14 8>; + interrupt-parent = <700>; + interrupts = <42 8>; + bus-range = <0 0>; + ranges = <02000000 0 a0000000 90000000 0 10000000 + 42000000 0 80000000 80000000 0 10000000 + 01000000 0 00000000 d0000000 0 00100000>; + clock-frequency = <0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <8500 100>; + compatible = "83xx"; + device_type = "pci"; + }; + + pic@700 { + linux,phandle = <700>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <700 100>; + built-in; + device_type = "ipic"; + }; + + par_io@1400 { + reg = <1400 100>; + device_type = "par_io"; + num-ports = <7>; + + ucc_pin@03 { + linux,phandle = <140003>; + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 3 4 3 0 2 0 /* MDIO */ + 3 5 1 0 2 0 /* MDC */ + 0 d 2 0 1 0 /* RX_CLK (CLK9) */ + 3 18 2 0 1 0 /* TX_CLK (CLK10) */ + 1 1 1 0 1 0 /* TxD1 */ + 1 0 1 0 1 0 /* TxD0 */ + 1 1 1 0 1 0 /* TxD1 */ + 1 2 1 0 1 0 /* TxD2 */ + 1 3 1 0 1 0 /* TxD3 */ + 1 4 2 0 1 0 /* RxD0 */ + 1 5 2 0 1 0 /* RxD1 */ + 1 6 2 0 1 0 /* RxD2 */ + 1 7 2 0 1 0 /* RxD3 */ + 1 8 2 0 1 0 /* RX_ER */ + 1 9 1 0 1 0 /* TX_ER */ + 1 a 2 0 1 0 /* RX_DV */ + 1 b 2 0 1 0 /* COL */ + 1 c 1 0 1 0 /* TX_EN */ + 1 d 2 0 1 0>;/* CRS */ + }; + ucc_pin@04 { + linux,phandle = <140004>; + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 3 1f 2 0 1 0 /* RX_CLK (CLK7) */ + 3 6 2 0 1 0 /* TX_CLK (CLK8) */ + 1 12 1 0 1 0 /* TxD0 */ + 1 13 1 0 1 0 /* TxD1 */ + 1 14 1 0 1 0 /* TxD2 */ + 1 15 1 0 1 0 /* TxD3 */ + 1 16 2 0 1 0 /* RxD0 */ + 1 17 2 0 1 0 /* RxD1 */ + 1 18 2 0 1 0 /* RxD2 */ + 1 19 2 0 1 0 /* RxD3 */ + 1 1a 2 0 1 0 /* RX_ER */ + 1 1b 1 0 1 0 /* TX_ER */ + 1 1c 2 0 1 0 /* RX_DV */ + 1 1d 2 0 1 0 /* COL */ + 1 1e 1 0 1 0 /* TX_EN */ + 1 1f 2 0 1 0>;/* CRS */ + }; + }; + }; + + qe@e0100000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "qe"; + model = "QE"; + ranges = <0 e0100000 00100000>; + reg = ; + brg-frequency = <0>; + bus-frequency = ; + + muram@10000 { + device_type = "muram"; + ranges = <0 00010000 00004000>; + + data-only@0 { + reg = <0 4000>; + }; + }; + + spi@4c0 { + device_type = "spi"; + compatible = "fsl_spi"; + reg = <4c0 40>; + interrupts = <2>; + interrupt-parent = <80>; + mode = "cpu"; + }; + + spi@500 { + device_type = "spi"; + compatible = "fsl_spi"; + reg = <500 40>; + interrupts = <1>; + interrupt-parent = <80>; + mode = "cpu"; + }; + + usb@6c0 { + device_type = "usb"; + compatible = "qe_udc"; + reg = <6c0 40 8B00 100>; + interrupts = ; + interrupt-parent = <80>; + mode = "slave"; + }; + + ucc@2200 { + device_type = "network"; + compatible = "ucc_geth"; + model = "UCC"; + device-id = <3>; + reg = <2200 200>; + interrupts = <22>; + interrupt-parent = <80>; + mac-address = [ 00 04 9f 00 23 23 ]; + rx-clock = <19>; + tx-clock = <1a>; + phy-handle = <212003>; + pio-handle = <140003>; + }; + + ucc@3200 { + device_type = "network"; + compatible = "ucc_geth"; + model = "UCC"; + device-id = <4>; + reg = <3000 200>; + interrupts = <23>; + interrupt-parent = <80>; + mac-address = [ 00 11 22 33 44 55 ]; + rx-clock = <17>; + tx-clock = <18>; + phy-handle = <212004>; + pio-handle = <140004>; + }; + + mdio@2320 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2320 18>; + device_type = "mdio"; + compatible = "ucc_geth_phy"; + + ethernet-phy@03 { + linux,phandle = <212003>; + interrupt-parent = <700>; + interrupts = <11 2>; + reg = <3>; + device_type = "ethernet-phy"; + interface = <3>; //ENET_100_MII + }; + ethernet-phy@04 { + linux,phandle = <212004>; + interrupt-parent = <700>; + interrupts = <12 2>; + reg = <4>; + device_type = "ethernet-phy"; + interface = <3>; + }; + }; + + qeic@80 { + linux,phandle = <80>; + interrupt-controller; + device_type = "qeic"; + #address-cells = <0>; + #interrupt-cells = <1>; + reg = <80 80>; + built-in; + big-endian; + interrupts = <20 8 21 8>; //high:32 low:33 + interrupt-parent = <700>; + }; + }; +}; -- cgit v1.2.3 From ad71860a17ba33eb0e673e9e2cf5ba0d8e3e3fdd Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Fri, 2 Feb 2007 19:48:19 +0300 Subject: ACPICA: minimal patch to integrate new tables into Linux Signed-off-by: Len Brown --- arch/i386/kernel/acpi/boot.c | 17 +++++------------ arch/ia64/kernel/acpi.c | 8 ++++---- arch/ia64/sn/kernel/io_common.c | 17 ++++++++++++----- arch/ia64/sn/kernel/iomv.c | 10 ++++++---- arch/x86_64/kernel/time.c | 18 +++++++++--------- 5 files changed, 36 insertions(+), 34 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c index cbcb2c27f48b..9adabc4dba70 100644 --- a/arch/i386/kernel/acpi/boot.c +++ b/arch/i386/kernel/acpi/boot.c @@ -716,33 +716,26 @@ static int __init acpi_parse_fadt(unsigned long phys, unsigned long size) printk(KERN_WARNING PREFIX "Unable to map FADT\n"); return 0; } - /* initialize sci_int early for INT_SRC_OVR MADT parsing */ - acpi_fadt.sci_int = fadt->sci_int; - - /* initialize rev and apic_phys_dest_mode for x86_64 genapic */ - acpi_fadt.revision = fadt->revision; - acpi_fadt.force_apic_physical_destination_mode = - fadt->force_apic_physical_destination_mode; #ifdef CONFIG_X86_PM_TIMER /* detect the location of the ACPI PM Timer */ - if (fadt->revision >= FADT2_REVISION_ID) { + if (fadt->header.revision >= FADT2_REVISION_ID) { /* FADT rev. 2 */ - if (fadt->xpm_tmr_blk.address_space_id != + if (fadt->xpm_timer_block.space_id != ACPI_ADR_SPACE_SYSTEM_IO) return 0; - pmtmr_ioport = fadt->xpm_tmr_blk.address; + pmtmr_ioport = fadt->xpm_timer_block.address; /* * "X" fields are optional extensions to the original V1.0 * fields, so we must selectively expand V1.0 fields if the * corresponding X field is zero. */ if (!pmtmr_ioport) - pmtmr_ioport = fadt->V1_pm_tmr_blk; + pmtmr_ioport = fadt->pm_timer_block; } else { /* FADT rev. 1 */ - pmtmr_ioport = fadt->V1_pm_tmr_blk; + pmtmr_ioport = fadt->pm_timer_block; } if (pmtmr_ioport) printk(KERN_INFO PREFIX "PM-Timer IO Port: %#x\n", diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index ef2fe474f107..aa6f96720984 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -76,7 +76,7 @@ const char *acpi_get_sysname(void) { #ifdef CONFIG_IA64_GENERIC unsigned long rsdp_phys; - struct acpi20_table_rsdp *rsdp; + struct acpi_table_rsdp *rsdp; struct acpi_table_xsdt *xsdt; struct acpi_table_header *hdr; @@ -87,8 +87,8 @@ const char *acpi_get_sysname(void) return "dig"; } - rsdp = (struct acpi20_table_rsdp *)__va(rsdp_phys); - if (strncmp(rsdp->signature, RSDP_SIG, sizeof(RSDP_SIG) - 1)) { + rsdp = (struct acpi_table_rsdp *)__va(rsdp_phys); + if (strncmp(rsdp->signature, ACPI_SIG_RSDP, sizeof(ACPI_SIG_RSDP) - 1)) { printk(KERN_ERR "ACPI 2.0 RSDP signature incorrect, default to \"dig\"\n"); return "dig"; @@ -96,7 +96,7 @@ const char *acpi_get_sysname(void) xsdt = (struct acpi_table_xsdt *)__va(rsdp->xsdt_address); hdr = &xsdt->header; - if (strncmp(hdr->signature, XSDT_SIG, sizeof(XSDT_SIG) - 1)) { + if (strncmp(hdr->signature, ACPI_SIG_XSDT, sizeof(ACPI_SIG_XSDT) - 1)) { printk(KERN_ERR "ACPI 2.0 XSDT signature incorrect, default to \"dig\"\n"); return "dig"; diff --git a/arch/ia64/sn/kernel/io_common.c b/arch/ia64/sn/kernel/io_common.c index d4dd8f4b6b8d..65979f1fb353 100644 --- a/arch/ia64/sn/kernel/io_common.c +++ b/arch/ia64/sn/kernel/io_common.c @@ -25,7 +25,6 @@ #include "xtalk/xwidgetdev.h" #include #include -#include extern void sn_init_cpei_timer(void); extern void register_sn_procfs(void); @@ -37,7 +36,6 @@ extern void sn_legacy_pci_window_fixup(struct pci_controller *, u64, u64); extern void sn_io_acpi_init(void); extern void sn_io_init(void); - static struct list_head sn_sysdata_list; /* sysdata list struct */ @@ -50,6 +48,15 @@ int sn_ioif_inited; /* SN I/O infrastructure initialized? */ struct sn_pcibus_provider *sn_pci_provider[PCIIO_ASIC_MAX_TYPES]; /* indexed by asic type */ +int sn_acpi_base_support() +{ + struct acpi_table_header *header; + (void)acpi_get_table_by_index(ACPI_TABLE_INDEX_DSDT, &header); + if (header && header->oem_revision >= 0x20101) + return 1; + return 0; +} + /* * Hooks and struct for unsupported pci providers */ @@ -286,7 +293,7 @@ void sn_pci_fixup_slot(struct pci_dev *dev) list_add_tail(&pcidev_info->pdi_list, &(SN_PLATFORM_DATA(dev->bus)->pcidev_info)); - if (SN_ACPI_BASE_SUPPORT()) + if (sn_acpi_base_support()) sn_acpi_slot_fixup(dev, pcidev_info); else sn_more_slot_fixup(dev, pcidev_info); @@ -498,7 +505,7 @@ void __devinit sn_pci_fixup_bus(struct pci_bus *bus) { - if (SN_ACPI_BASE_SUPPORT()) + if (sn_acpi_base_support()) sn_acpi_bus_fixup(bus); else sn_bus_fixup(bus); @@ -546,7 +553,7 @@ sn_io_early_init(void) printk(KERN_INFO "ACPI DSDT OEM Rev 0x%x\n", acpi_gbl_DSDT->oem_revision); - if (SN_ACPI_BASE_SUPPORT()) + if (sn_acpi_base_support()) sn_io_acpi_init(); else sn_io_init(); diff --git a/arch/ia64/sn/kernel/iomv.c b/arch/ia64/sn/kernel/iomv.c index 4aa4f301d56d..b1a47da118b1 100644 --- a/arch/ia64/sn/kernel/iomv.c +++ b/arch/ia64/sn/kernel/iomv.c @@ -1,4 +1,4 @@ -/* +/* * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. @@ -16,7 +16,6 @@ #include #include #include -#include #define IS_LEGACY_VGA_IOPORT(p) \ (((p) >= 0x3b0 && (p) <= 0x3bb) || ((p) >= 0x3c0 && (p) <= 0x3df)) @@ -26,9 +25,12 @@ * @port: port to convert * * Legacy in/out instructions are converted to ld/st instructions - * on IA64. This routine will convert a port number into a valid + * on IA64. This routine will convert a port number into a valid * SN i/o address. Used by sn_in*() and sn_out*(). */ + +extern int sn_acpi_base_support(); + void *sn_io_addr(unsigned long port) { if (!IS_RUNNING_ON_SIMULATOR()) { @@ -37,7 +39,7 @@ void *sn_io_addr(unsigned long port) /* On sn2, legacy I/O ports don't point at anything */ if (port < (64 * 1024)) return NULL; - if (SN_ACPI_BASE_SUPPORT()) + if (sn_acpi_base_support()) return (__ia64_mk_io_addr(port)); else return ((void *)(port | __IA64_UNCACHED_OFFSET)); diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c index 5cc76d0d331f..335cc91c49b7 100644 --- a/arch/x86_64/kernel/time.c +++ b/arch/x86_64/kernel/time.c @@ -498,7 +498,7 @@ static unsigned long get_cmos_time(void) { unsigned int year, mon, day, hour, min, sec; unsigned long flags; - unsigned extyear = 0; + unsigned century = 0; spin_lock_irqsave(&rtc_lock, flags); @@ -510,9 +510,9 @@ static unsigned long get_cmos_time(void) mon = CMOS_READ(RTC_MONTH); year = CMOS_READ(RTC_YEAR); #ifdef CONFIG_ACPI - if (acpi_fadt.revision >= FADT2_REVISION_ID && - acpi_fadt.century) - extyear = CMOS_READ(acpi_fadt.century); + if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID && + acpi_gbl_FADT.century) + century = CMOS_READ(acpi_gbl_FADT.century); #endif } while (sec != CMOS_READ(RTC_SECONDS)); @@ -530,10 +530,10 @@ static unsigned long get_cmos_time(void) BCD_TO_BIN(mon); BCD_TO_BIN(year); - if (extyear) { - BCD_TO_BIN(extyear); - year += extyear; - printk(KERN_INFO "Extended CMOS year: %d\n", extyear); + if (century) { + BCD_TO_BIN(century); + year += century * 100; + printk(KERN_INFO "Extended CMOS year: %d\n", century * 100); } else { /* * x86-64 systems only exists since 2002. @@ -954,7 +954,7 @@ __cpuinit int unsynchronized_tsc(void) if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) { #ifdef CONFIG_ACPI /* But TSC doesn't tick in C3 so don't use it there */ - if (acpi_fadt.length > 0 && acpi_fadt.plvl3_lat < 1000) + if (acpi_gbl_FADT.header.length > 0 && acpi_gbl_FADT.C3latency < 1000) return 1; #endif return 0; -- cgit v1.2.3 From ceb6c46839021d5c7c338d48deac616944660124 Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Fri, 2 Feb 2007 19:48:22 +0300 Subject: ACPICA: Remove duplicate table manager Signed-off-by: Len Brown --- arch/i386/kernel/acpi/boot.c | 40 ++++++++++++++-------------- arch/i386/kernel/acpi/earlyquirk.c | 4 +-- arch/i386/mach-es7000/es7000.h | 9 ------- arch/i386/mach-es7000/es7000plat.c | 53 ++++++-------------------------------- arch/i386/pci/mmconfig.c | 2 +- 5 files changed, 31 insertions(+), 77 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c index 9adabc4dba70..543eac5da176 100644 --- a/arch/i386/kernel/acpi/boot.c +++ b/arch/i386/kernel/acpi/boot.c @@ -169,16 +169,16 @@ char *__acpi_map_table(unsigned long phys, unsigned long size) struct acpi_table_mcfg_config *pci_mmcfg_config; int pci_mmcfg_config_num; -int __init acpi_parse_mcfg(unsigned long phys_addr, unsigned long size) +int __init acpi_parse_mcfg(struct acpi_table_header *header) { struct acpi_table_mcfg *mcfg; unsigned long i; int config_size; - if (!phys_addr || !size) + if (!header) return -EINVAL; - mcfg = (struct acpi_table_mcfg *)__acpi_map_table(phys_addr, size); + mcfg = (struct acpi_table_mcfg *)header; if (!mcfg) { printk(KERN_WARNING PREFIX "Unable to map MCFG\n"); return -ENODEV; @@ -186,7 +186,7 @@ int __init acpi_parse_mcfg(unsigned long phys_addr, unsigned long size) /* how many config structures do we have */ pci_mmcfg_config_num = 0; - i = size - sizeof(struct acpi_table_mcfg); + i = header->length - sizeof(struct acpi_table_mcfg); while (i >= sizeof(struct acpi_table_mcfg_config)) { ++pci_mmcfg_config_num; i -= sizeof(struct acpi_table_mcfg_config); @@ -220,14 +220,14 @@ int __init acpi_parse_mcfg(unsigned long phys_addr, unsigned long size) #endif /* CONFIG_PCI_MMCONFIG */ #ifdef CONFIG_X86_LOCAL_APIC -static int __init acpi_parse_madt(unsigned long phys_addr, unsigned long size) +static int __init acpi_parse_madt(struct acpi_table_header *header) { struct acpi_table_madt *madt = NULL; - if (!phys_addr || !size || !cpu_has_apic) + if (!header|| !cpu_has_apic) return -EINVAL; - madt = (struct acpi_table_madt *)__acpi_map_table(phys_addr, size); + madt = (struct acpi_table_madt *)header; if (!madt) { printk(KERN_WARNING PREFIX "Unable to map MADT\n"); return -ENODEV; @@ -619,14 +619,14 @@ acpi_scan_rsdp(unsigned long start, unsigned long length) return 0; } -static int __init acpi_parse_sbf(unsigned long phys_addr, unsigned long size) +static int __init acpi_parse_sbf(struct acpi_table_header *header) { struct acpi_table_sbf *sb; - if (!phys_addr || !size) + if (!header) return -EINVAL; - sb = (struct acpi_table_sbf *)__acpi_map_table(phys_addr, size); + sb = (struct acpi_table_sbf *)header; if (!sb) { printk(KERN_WARNING PREFIX "Unable to map SBF\n"); return -ENODEV; @@ -639,16 +639,16 @@ static int __init acpi_parse_sbf(unsigned long phys_addr, unsigned long size) #ifdef CONFIG_HPET_TIMER -static int __init acpi_parse_hpet(unsigned long phys, unsigned long size) +static int __init acpi_parse_hpet(struct acpi_table_header *header) { struct acpi_table_hpet *hpet_tbl; struct resource *hpet_res; resource_size_t res_start; - if (!phys || !size) + if (!header) return -EINVAL; - hpet_tbl = (struct acpi_table_hpet *)__acpi_map_table(phys, size); + hpet_tbl = (struct acpi_table_hpet *)header; if (!hpet_tbl) { printk(KERN_WARNING PREFIX "Unable to map HPET\n"); return -ENODEV; @@ -707,11 +707,11 @@ static int __init acpi_parse_hpet(unsigned long phys, unsigned long size) extern u32 pmtmr_ioport; #endif -static int __init acpi_parse_fadt(unsigned long phys, unsigned long size) +static int __init acpi_parse_fadt(struct acpi_table_header *header) { struct fadt_descriptor *fadt = NULL; - fadt = (struct fadt_descriptor *)__acpi_map_table(phys, size); + fadt = (struct fadt_descriptor *)header; if (!fadt) { printk(KERN_WARNING PREFIX "Unable to map FADT\n"); return 0; @@ -901,7 +901,7 @@ static void __init acpi_process_madt(void) #ifdef CONFIG_X86_LOCAL_APIC int count, error; - count = acpi_table_parse(ACPI_APIC, acpi_parse_madt); + count = acpi_table_parse("APIC", acpi_parse_madt); if (count >= 1) { /* @@ -1197,7 +1197,7 @@ int __init acpi_boot_table_init(void) return error; } - acpi_table_parse(ACPI_BOOT, acpi_parse_sbf); + acpi_table_parse("BOOT", acpi_parse_sbf); /* * blacklist may disable ACPI entirely @@ -1225,19 +1225,19 @@ int __init acpi_boot_init(void) if (acpi_disabled && !acpi_ht) return 1; - acpi_table_parse(ACPI_BOOT, acpi_parse_sbf); + acpi_table_parse("BOOT", acpi_parse_sbf); /* * set sci_int and PM timer address */ - acpi_table_parse(ACPI_FADT, acpi_parse_fadt); + acpi_table_parse(ACPI_SIG_FADT, acpi_parse_fadt); /* * Process the Multiple APIC Description Table (MADT), if present */ acpi_process_madt(); - acpi_table_parse(ACPI_HPET, acpi_parse_hpet); + acpi_table_parse("HPET", acpi_parse_hpet); return 0; } diff --git a/arch/i386/kernel/acpi/earlyquirk.c b/arch/i386/kernel/acpi/earlyquirk.c index 4b60af7f91dd..4261c8501b7e 100644 --- a/arch/i386/kernel/acpi/earlyquirk.c +++ b/arch/i386/kernel/acpi/earlyquirk.c @@ -16,7 +16,7 @@ static int nvidia_hpet_detected __initdata; -static int __init nvidia_hpet_check(unsigned long phys, unsigned long size) +static int __init nvidia_hpet_check(struct acpi_table_header *header) { nvidia_hpet_detected = 1; return 0; @@ -30,7 +30,7 @@ static int __init check_bridge(int vendor, int device) is enabled. */ if (!acpi_use_timer_override && vendor == PCI_VENDOR_ID_NVIDIA) { nvidia_hpet_detected = 0; - acpi_table_parse(ACPI_HPET, nvidia_hpet_check); + acpi_table_parse("HPET", nvidia_hpet_check); if (nvidia_hpet_detected == 0) { acpi_skip_timer_override = 1; printk(KERN_INFO "Nvidia board " diff --git a/arch/i386/mach-es7000/es7000.h b/arch/i386/mach-es7000/es7000.h index 80566ca4a80a..c8d5aa132fa0 100644 --- a/arch/i386/mach-es7000/es7000.h +++ b/arch/i386/mach-es7000/es7000.h @@ -84,15 +84,6 @@ struct es7000_oem_table { }; #ifdef CONFIG_ACPI -struct acpi_table_sdt { - unsigned long pa; - unsigned long count; - struct { - unsigned long pa; - enum acpi_table_id id; - unsigned long size; - } entry[50]; -}; struct oem_table { struct acpi_table_header Header; diff --git a/arch/i386/mach-es7000/es7000plat.c b/arch/i386/mach-es7000/es7000plat.c index 3d0fc853516d..9be6ceabf042 100644 --- a/arch/i386/mach-es7000/es7000plat.c +++ b/arch/i386/mach-es7000/es7000plat.c @@ -160,51 +160,14 @@ parse_unisys_oem (char *oemptr) int __init find_unisys_acpi_oem_table(unsigned long *oem_addr) { - struct acpi_table_rsdp *rsdp = NULL; - unsigned long rsdp_phys = 0; - struct acpi_table_header *header = NULL; - int i; - struct acpi_table_sdt sdt; - - rsdp_phys = acpi_find_rsdp(); - rsdp = __va(rsdp_phys); - if (rsdp->rsdt_address) { - struct acpi_table_rsdt *mapped_rsdt = NULL; - sdt.pa = rsdp->rsdt_address; - - header = (struct acpi_table_header *) - __acpi_map_table(sdt.pa, sizeof(struct acpi_table_header)); - if (!header) - return -ENODEV; - - sdt.count = (header->length - sizeof(struct acpi_table_header)) >> 3; - mapped_rsdt = (struct acpi_table_rsdt *) - __acpi_map_table(sdt.pa, header->length); - if (!mapped_rsdt) - return -ENODEV; - - header = &mapped_rsdt->header; - - for (i = 0; i < sdt.count; i++) - sdt.entry[i].pa = (unsigned long) mapped_rsdt->entry[i]; - }; - for (i = 0; i < sdt.count; i++) { - - header = (struct acpi_table_header *) - __acpi_map_table(sdt.entry[i].pa, - sizeof(struct acpi_table_header)); - if (!header) - continue; - if (!strncmp((char *) &header->signature, "OEM1", 4)) { - if (!strncmp((char *) &header->oem_id, "UNISYS", 6)) { - void *addr; - struct oem_table *t; - acpi_table_print(header, sdt.entry[i].pa); - t = (struct oem_table *) __acpi_map_table(sdt.entry[i].pa, header->length); - addr = (void *) __acpi_map_table(t->OEMTableAddr, t->OEMTableSize); - *oem_addr = (unsigned long) addr; - return 0; - } + struct acpi_table_header *header = NULL; + int i = 0; + while (ACPI_SUCCESS(acpi_get_table("OEM1", i++, &header))) { + if (!memcmp((char *) &header->oem_id, "UNISYS", 6)) { + struct oem_table *t = (struct oem_table *)header; + *oem_addr = (unsigned long)__acpi_map_table(t->OEMTableAddr, + t->OEMTableSize); + return 0; } } return -1; diff --git a/arch/i386/pci/mmconfig.c b/arch/i386/pci/mmconfig.c index e2616a266e13..80522e331e34 100644 --- a/arch/i386/pci/mmconfig.c +++ b/arch/i386/pci/mmconfig.c @@ -199,7 +199,7 @@ void __init pci_mmcfg_init(int type) if ((pci_probe & PCI_PROBE_MMCONF) == 0) return; - acpi_table_parse(ACPI_MCFG, acpi_parse_mcfg); + acpi_table_parse("MCFG", acpi_parse_mcfg); if ((pci_mmcfg_config_num == 0) || (pci_mmcfg_config == NULL) || (pci_mmcfg_config[0].base_address == 0)) -- cgit v1.2.3 From cee324b145a1e5488b34191de670e5ed1d346ebb Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Fri, 2 Feb 2007 19:48:22 +0300 Subject: ACPICA: use new ACPI headers. Signed-off-by: Len Brown --- arch/i386/kernel/acpi/boot.c | 10 +++++----- arch/i386/kernel/cpu/cpufreq/longhaul.c | 15 ++++++--------- arch/i386/kernel/mpparse.c | 4 ++-- arch/ia64/kernel/acpi.c | 6 +++--- arch/x86_64/kernel/genapic.c | 4 ++-- arch/x86_64/kernel/mpparse.c | 2 +- 6 files changed, 19 insertions(+), 22 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c index 543eac5da176..cbbcf9c630bf 100644 --- a/arch/i386/kernel/acpi/boot.c +++ b/arch/i386/kernel/acpi/boot.c @@ -357,7 +357,7 @@ static void __init acpi_sci_ioapic_setup(u32 gsi, u16 polarity, u16 trigger) /* * stash over-ride to indicate we've been here - * and for later update of acpi_fadt + * and for later update of acpi_gbl_FADT */ acpi_sci_override_gsi = gsi; return; @@ -376,7 +376,7 @@ acpi_parse_int_src_ovr(acpi_table_entry_header * header, acpi_table_print_madt_entry(header); - if (intsrc->bus_irq == acpi_fadt.sci_int) { + if (intsrc->bus_irq == acpi_gbl_FADT.sci_interrupt) { acpi_sci_ioapic_setup(intsrc->global_irq, intsrc->flags.polarity, intsrc->flags.trigger); @@ -709,9 +709,9 @@ extern u32 pmtmr_ioport; static int __init acpi_parse_fadt(struct acpi_table_header *header) { - struct fadt_descriptor *fadt = NULL; + struct acpi_table_fadt *fadt = NULL; - fadt = (struct fadt_descriptor *)header; + fadt = (struct acpi_table_fadt *)header; if (!fadt) { printk(KERN_WARNING PREFIX "Unable to map FADT\n"); return 0; @@ -873,7 +873,7 @@ static int __init acpi_parse_madt_ioapic_entries(void) * pretend we got one so we can set the SCI flags. */ if (!acpi_sci_override_gsi) - acpi_sci_ioapic_setup(acpi_fadt.sci_int, 0, 0); + acpi_sci_ioapic_setup(acpi_gbl_FADT.sci_interrupt, 0, 0); /* Fill in identity legacy mapings where no override */ mp_config_acpi_legacy_irqs(); diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c index e940e00b96c9..a3db9332d652 100644 --- a/arch/i386/kernel/cpu/cpufreq/longhaul.c +++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c @@ -190,7 +190,7 @@ static void do_powersaver(int cx_address, unsigned int clock_ratio_index) /* Invoke C3 */ inb(cx_address); /* Dummy op - must do something useless after P_LVL3 read */ - t = inl(acpi_fadt.xpm_tmr_blk.address); + t = inl(acpi_gbl_FADT.xpm_timer_block.address); } /* Disable bus ratio bit */ local_irq_disable(); @@ -250,8 +250,7 @@ static void longhaul_setstate(unsigned int clock_ratio_index) outb(3, 0x22); } else if ((pr != NULL) && pr->flags.bm_control) { /* Disable bus master arbitration */ - acpi_set_register(ACPI_BITREG_ARB_DISABLE, 1, - ACPI_MTX_DO_NOT_LOCK); + acpi_set_register(ACPI_BITREG_ARB_DISABLE, 1); } switch (longhaul_version) { @@ -281,8 +280,7 @@ static void longhaul_setstate(unsigned int clock_ratio_index) case TYPE_POWERSAVER: if (longhaul_flags & USE_ACPI_C3) { /* Don't allow wakeup */ - acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 0, - ACPI_MTX_DO_NOT_LOCK); + acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 0); do_powersaver(cx->address, clock_ratio_index); } else { do_powersaver(0, clock_ratio_index); @@ -295,8 +293,7 @@ static void longhaul_setstate(unsigned int clock_ratio_index) outb(0, 0x22); } else if ((pr != NULL) && pr->flags.bm_control) { /* Enable bus master arbitration */ - acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0, - ACPI_MTX_DO_NOT_LOCK); + acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0); } outb(pic2_mask,0xA1); /* restore mask */ outb(pic1_mask,0x21); @@ -414,7 +411,7 @@ static int __init longhaul_get_ranges(void) highest_speed = calc_speed(maxmult); lowest_speed = calc_speed(minmult); dprintk ("FSB:%dMHz Lowest speed: %s Highest speed:%s\n", fsb, - print_speed(lowest_speed/1000), + print_speed(lowest_speed/1000), print_speed(highest_speed/1000)); if (lowest_speed == highest_speed) { @@ -498,7 +495,7 @@ static void __init longhaul_setup_voltagescaling(void) maxvid.mV/1000, maxvid.mV%1000, minvid.mV/1000, minvid.mV%1000, numvscales); - + j = 0; while (longhaul_table[j].frequency != CPUFREQ_TABLE_END) { speed = longhaul_table[j].frequency; diff --git a/arch/i386/kernel/mpparse.c b/arch/i386/kernel/mpparse.c index 49bff3596bff..4f5983c98669 100644 --- a/arch/i386/kernel/mpparse.c +++ b/arch/i386/kernel/mpparse.c @@ -1057,7 +1057,7 @@ int mp_register_gsi(u32 gsi, int triggering, int polarity) static int gsi_to_irq[MAX_GSI_NUM]; /* Don't set up the ACPI SCI because it's already set up */ - if (acpi_fadt.sci_int == gsi) + if (acpi_gbl_FADT.sci_interrupt == gsi) return gsi; ioapic = mp_find_ioapic(gsi); @@ -1114,7 +1114,7 @@ int mp_register_gsi(u32 gsi, int triggering, int polarity) /* * Don't assign IRQ used by ACPI SCI */ - if (gsi == acpi_fadt.sci_int) + if (gsi == acpi_gbl_FADT.sci_interrupt) gsi = pci_irq++; gsi_to_irq[irq] = gsi; } else { diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index aa6f96720984..d37fb8e81898 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -617,7 +617,7 @@ EXPORT_SYMBOL(acpi_unregister_gsi); static int __init acpi_parse_fadt(unsigned long phys_addr, unsigned long size) { struct acpi_table_header *fadt_header; - struct fadt_descriptor *fadt; + struct acpi_table_fadt *fadt; if (!phys_addr || !size) return -EINVAL; @@ -626,9 +626,9 @@ static int __init acpi_parse_fadt(unsigned long phys_addr, unsigned long size) if (fadt_header->revision != 3) return -ENODEV; /* Only deal with ACPI 2.0 FADT */ - fadt = (struct fadt_descriptor *)fadt_header; + fadt = (struct acpi_table_fadt *)fadt_header; - acpi_register_gsi(fadt->sci_int, ACPI_LEVEL_SENSITIVE, ACPI_ACTIVE_LOW); + acpi_register_gsi(fadt->sci_interrupt, ACPI_LEVEL_SENSITIVE, ACPI_ACTIVE_LOW); return 0; } diff --git a/arch/x86_64/kernel/genapic.c b/arch/x86_64/kernel/genapic.c index b007433f96bb..0b3603adf56d 100644 --- a/arch/x86_64/kernel/genapic.c +++ b/arch/x86_64/kernel/genapic.c @@ -58,8 +58,8 @@ void __init clustered_apic_check(void) * Some x86_64 machines use physical APIC mode regardless of how many * procs/clusters are present (x86_64 ES7000 is an example). */ - if (acpi_fadt.revision > FADT2_REVISION_ID) - if (acpi_fadt.force_apic_physical_destination_mode) { + if (acpi_gbl_FADT.header.revision > FADT2_REVISION_ID) + if (acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL) { genapic = &apic_cluster; goto print; } diff --git a/arch/x86_64/kernel/mpparse.c b/arch/x86_64/kernel/mpparse.c index 08072568847d..50dd8bef850e 100644 --- a/arch/x86_64/kernel/mpparse.c +++ b/arch/x86_64/kernel/mpparse.c @@ -798,7 +798,7 @@ int mp_register_gsi(u32 gsi, int triggering, int polarity) return gsi; /* Don't set up the ACPI SCI because it's already set up */ - if (acpi_fadt.sci_int == gsi) + if (acpi_gbl_FADT.sci_interrupt == gsi) return gsi; ioapic = mp_find_ioapic(gsi); -- cgit v1.2.3 From ad363f80c386bc4701b1bc2cdf08ca9b96a9337b Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Fri, 2 Feb 2007 19:48:22 +0300 Subject: ACPICA: Remove duplicate table definitions. Signed-off-by: Len Brown --- arch/i386/kernel/acpi/boot.c | 29 ++++++++++++++--------------- 1 file changed, 14 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c index cbbcf9c630bf..389a8a56d2b4 100644 --- a/arch/i386/kernel/acpi/boot.c +++ b/arch/i386/kernel/acpi/boot.c @@ -204,9 +204,9 @@ int __init acpi_parse_mcfg(struct acpi_table_header *header) return -ENOMEM; } - memcpy(pci_mmcfg_config, &mcfg->config, config_size); + memcpy(pci_mmcfg_config, &mcfg[1], config_size); for (i = 0; i < pci_mmcfg_config_num; ++i) { - if (mcfg->config[i].base_reserved) { + if (pci_mmcfg_config[i].base_reserved) { printk(KERN_ERR PREFIX "MMCONFIG not in low 4GB of memory\n"); kfree(pci_mmcfg_config); @@ -233,11 +233,11 @@ static int __init acpi_parse_madt(struct acpi_table_header *header) return -ENODEV; } - if (madt->lapic_address) { - acpi_lapic_addr = (u64) madt->lapic_address; + if (madt->address) { + acpi_lapic_addr = (u64) madt->address; printk(KERN_DEBUG PREFIX "Local APIC address 0x%08x\n", - madt->lapic_address); + madt->address); } acpi_madt_oem_check(madt->header.oem_id, madt->header.oem_table_id); @@ -654,7 +654,7 @@ static int __init acpi_parse_hpet(struct acpi_table_header *header) return -ENODEV; } - if (hpet_tbl->addr.space_id != ACPI_SPACE_MEM) { + if (hpet_tbl->address.space_id != ACPI_SPACE_MEM) { printk(KERN_WARNING PREFIX "HPET timers must be located in " "memory.\n"); return -1; @@ -667,29 +667,28 @@ static int __init acpi_parse_hpet(struct acpi_table_header *header) hpet_res->name = (void *)&hpet_res[1]; hpet_res->flags = IORESOURCE_MEM | IORESOURCE_BUSY; snprintf((char *)hpet_res->name, HPET_RESOURCE_NAME_SIZE, - "HPET %u", hpet_tbl->number); + "HPET %u", hpet_tbl->sequence); hpet_res->end = (1 * 1024) - 1; } -#ifdef CONFIG_X86_64 - vxtime.hpet_address = hpet_tbl->addr.addrl | - ((long)hpet_tbl->addr.addrh << 32); +#ifdef CONFIG_X86_64 + vxtime.hpet_address = hpet_tbl->address.address; printk(KERN_INFO PREFIX "HPET id: %#x base: %#lx\n", - hpet_tbl->id, vxtime.hpet_address); + hpet_tbl->id, vxtime.hpet_address); res_start = vxtime.hpet_address; -#else /* X86 */ +#else /* X86 */ { extern unsigned long hpet_address; - hpet_address = hpet_tbl->addr.addrl; + hpet_address = hpet_tbl->address.address; printk(KERN_INFO PREFIX "HPET id: %#x base: %#lx\n", - hpet_tbl->id, hpet_address); + hpet_tbl->id, hpet_address); res_start = hpet_address; } -#endif /* X86 */ +#endif /* X86 */ if (hpet_res) { hpet_res->start = res_start; -- cgit v1.2.3 From 5f3b1a8b6737b09ce5df4ec9fad4ad271aecb5fb Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Fri, 2 Feb 2007 19:48:22 +0300 Subject: ACPICA: Remove duplicate table definitions (non-conflicting) Signed-off-by: Len Brown --- arch/i386/kernel/acpi/boot.c | 156 +++++++++++++++++++-------------------- arch/ia64/kernel/acpi.c | 172 +++++++++++++++++++++---------------------- 2 files changed, 160 insertions(+), 168 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c index 389a8a56d2b4..5fafbacdd4cb 100644 --- a/arch/i386/kernel/acpi/boot.c +++ b/arch/i386/kernel/acpi/boot.c @@ -66,7 +66,7 @@ static inline int acpi_madt_oem_check(char *oem_id, char *oem_table_id) { return #define BAD_MADT_ENTRY(entry, end) ( \ (!entry) || (unsigned long)entry + sizeof(*entry) > end || \ - ((acpi_table_entry_header *)entry)->length < sizeof(*entry)) + ((struct acpi_subtable_header *)entry)->length < sizeof(*entry)) #define PREFIX "ACPI: " @@ -79,7 +79,7 @@ int acpi_ioapic; int acpi_strict; EXPORT_SYMBOL(acpi_strict); -acpi_interrupt_flags acpi_sci_flags __initdata; +u8 acpi_sci_flags __initdata; int acpi_sci_override_gsi __initdata; int acpi_skip_timer_override __initdata; int acpi_use_timer_override __initdata; @@ -246,11 +246,11 @@ static int __init acpi_parse_madt(struct acpi_table_header *header) } static int __init -acpi_parse_lapic(acpi_table_entry_header * header, const unsigned long end) +acpi_parse_lapic(struct acpi_subtable_header * header, const unsigned long end) { - struct acpi_table_lapic *processor = NULL; + struct acpi_madt_local_apic *processor = NULL; - processor = (struct acpi_table_lapic *)header; + processor = (struct acpi_madt_local_apic *)header; if (BAD_MADT_ENTRY(processor, end)) return -EINVAL; @@ -258,8 +258,8 @@ acpi_parse_lapic(acpi_table_entry_header * header, const unsigned long end) acpi_table_print_madt_entry(header); /* Record local apic id only when enabled */ - if (processor->flags.enabled) - x86_acpiid_to_apicid[processor->acpi_id] = processor->id; + if (processor->lapic_flags & ACPI_MADT_ENABLED) + x86_acpiid_to_apicid[processor->processor_id] = processor->id; /* * We need to register disabled CPU as well to permit @@ -269,18 +269,18 @@ acpi_parse_lapic(acpi_table_entry_header * header, const unsigned long end) * when we use CPU hotplug. */ mp_register_lapic(processor->id, /* APIC ID */ - processor->flags.enabled); /* Enabled? */ + processor->lapic_flags & ACPI_MADT_ENABLED); /* Enabled? */ return 0; } static int __init -acpi_parse_lapic_addr_ovr(acpi_table_entry_header * header, +acpi_parse_lapic_addr_ovr(struct acpi_subtable_header * header, const unsigned long end) { - struct acpi_table_lapic_addr_ovr *lapic_addr_ovr = NULL; + struct acpi_madt_local_apic_override *lapic_addr_ovr = NULL; - lapic_addr_ovr = (struct acpi_table_lapic_addr_ovr *)header; + lapic_addr_ovr = (struct acpi_madt_local_apic_override *)header; if (BAD_MADT_ENTRY(lapic_addr_ovr, end)) return -EINVAL; @@ -291,11 +291,11 @@ acpi_parse_lapic_addr_ovr(acpi_table_entry_header * header, } static int __init -acpi_parse_lapic_nmi(acpi_table_entry_header * header, const unsigned long end) +acpi_parse_lapic_nmi(struct acpi_subtable_header * header, const unsigned long end) { - struct acpi_table_lapic_nmi *lapic_nmi = NULL; + struct acpi_madt_local_apic_nmi *lapic_nmi = NULL; - lapic_nmi = (struct acpi_table_lapic_nmi *)header; + lapic_nmi = (struct acpi_madt_local_apic_nmi *)header; if (BAD_MADT_ENTRY(lapic_nmi, end)) return -EINVAL; @@ -313,11 +313,11 @@ acpi_parse_lapic_nmi(acpi_table_entry_header * header, const unsigned long end) #ifdef CONFIG_X86_IO_APIC static int __init -acpi_parse_ioapic(acpi_table_entry_header * header, const unsigned long end) +acpi_parse_ioapic(struct acpi_subtable_header * header, const unsigned long end) { - struct acpi_table_ioapic *ioapic = NULL; + struct acpi_madt_io_apic *ioapic = NULL; - ioapic = (struct acpi_table_ioapic *)header; + ioapic = (struct acpi_madt_io_apic *)header; if (BAD_MADT_ENTRY(ioapic, end)) return -EINVAL; @@ -342,11 +342,11 @@ static void __init acpi_sci_ioapic_setup(u32 gsi, u16 polarity, u16 trigger) polarity = 3; /* Command-line over-ride via acpi_sci= */ - if (acpi_sci_flags.trigger) - trigger = acpi_sci_flags.trigger; + if (acpi_sci_flags & ACPI_MADT_TRIGGER_MASK) + trigger = (acpi_sci_flags & ACPI_MADT_TRIGGER_MASK) >> 2; - if (acpi_sci_flags.polarity) - polarity = acpi_sci_flags.polarity; + if (acpi_sci_flags & ACPI_MADT_POLARITY_MASK) + polarity = acpi_sci_flags & ACPI_MADT_POLARITY_MASK; /* * mp_config_acpi_legacy_irqs() already setup IRQs < 16 @@ -364,44 +364,45 @@ static void __init acpi_sci_ioapic_setup(u32 gsi, u16 polarity, u16 trigger) } static int __init -acpi_parse_int_src_ovr(acpi_table_entry_header * header, +acpi_parse_int_src_ovr(struct acpi_subtable_header * header, const unsigned long end) { - struct acpi_table_int_src_ovr *intsrc = NULL; + struct acpi_madt_interrupt_override *intsrc = NULL; - intsrc = (struct acpi_table_int_src_ovr *)header; + intsrc = (struct acpi_madt_interrupt_override *)header; if (BAD_MADT_ENTRY(intsrc, end)) return -EINVAL; acpi_table_print_madt_entry(header); - if (intsrc->bus_irq == acpi_gbl_FADT.sci_interrupt) { + if (intsrc->source_irq == acpi_gbl_FADT.sci_interrupt) { acpi_sci_ioapic_setup(intsrc->global_irq, - intsrc->flags.polarity, - intsrc->flags.trigger); + intsrc->inti_flags & ACPI_MADT_POLARITY_MASK, + (intsrc->inti_flags & ACPI_MADT_TRIGGER_MASK) >> 2); return 0; } if (acpi_skip_timer_override && - intsrc->bus_irq == 0 && intsrc->global_irq == 2) { + intsrc->source_irq == 0 && intsrc->global_irq == 2) { printk(PREFIX "BIOS IRQ0 pin2 override ignored.\n"); return 0; } - mp_override_legacy_irq(intsrc->bus_irq, - intsrc->flags.polarity, - intsrc->flags.trigger, intsrc->global_irq); + mp_override_legacy_irq(intsrc->source_irq, + intsrc->inti_flags & ACPI_MADT_POLARITY_MASK, + (intsrc->inti_flags & ACPI_MADT_TRIGGER_MASK) >> 2, + intsrc->global_irq); return 0; } static int __init -acpi_parse_nmi_src(acpi_table_entry_header * header, const unsigned long end) +acpi_parse_nmi_src(struct acpi_subtable_header * header, const unsigned long end) { - struct acpi_table_nmi_src *nmi_src = NULL; + struct acpi_madt_nmi_source *nmi_src = NULL; - nmi_src = (struct acpi_table_nmi_src *)header; + nmi_src = (struct acpi_madt_nmi_source *)header; if (BAD_MADT_ENTRY(nmi_src, end)) return -EINVAL; @@ -417,7 +418,7 @@ acpi_parse_nmi_src(acpi_table_entry_header * header, const unsigned long end) /* * acpi_pic_sci_set_trigger() - * + * * use ELCR to set PIC-mode trigger type for SCI * * If a PIC-mode SCI is not recognized or gives spurious IRQ7's @@ -511,7 +512,7 @@ int acpi_map_lsapic(acpi_handle handle, int *pcpu) { struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; union acpi_object *obj; - struct acpi_table_lapic *lapic; + struct acpi_madt_local_apic *lapic; cpumask_t tmp_map, new_map; u8 physid; int cpu; @@ -529,10 +530,10 @@ int acpi_map_lsapic(acpi_handle handle, int *pcpu) return -EINVAL; } - lapic = (struct acpi_table_lapic *)obj->buffer.pointer; + lapic = (struct acpi_madt_local_apic *)obj->buffer.pointer; - if ((lapic->header.type != ACPI_MADT_LAPIC) || - (!lapic->flags.enabled)) { + if (lapic->header.type != ACPI_MADT_TYPE_LOCAL_APIC || + !(lapic->lapic_flags & ACPI_MADT_ENABLED)) { kfree(buffer.pointer); return -EINVAL; } @@ -544,7 +545,7 @@ int acpi_map_lsapic(acpi_handle handle, int *pcpu) buffer.pointer = NULL; tmp_map = cpu_present_map; - mp_register_lapic(physid, lapic->flags.enabled); + mp_register_lapic(physid, lapic->lapic_flags & ACPI_MADT_ENABLED); /* * If mp_register_lapic successfully generates a new logical cpu @@ -619,36 +620,30 @@ acpi_scan_rsdp(unsigned long start, unsigned long length) return 0; } -static int __init acpi_parse_sbf(struct acpi_table_header *header) +static int __init acpi_parse_sbf(struct acpi_table_header *table) { - struct acpi_table_sbf *sb; - - if (!header) - return -EINVAL; + struct acpi_table_boot *sb; - sb = (struct acpi_table_sbf *)header; + sb = (struct acpi_table_boot *)table; if (!sb) { printk(KERN_WARNING PREFIX "Unable to map SBF\n"); return -ENODEV; } - sbf_port = sb->sbf_cmos; /* Save CMOS port */ + sbf_port = sb->cmos_index; /* Save CMOS port */ return 0; } #ifdef CONFIG_HPET_TIMER -static int __init acpi_parse_hpet(struct acpi_table_header *header) +static int __init acpi_parse_hpet(struct acpi_table_header *table) { struct acpi_table_hpet *hpet_tbl; struct resource *hpet_res; resource_size_t res_start; - if (!header) - return -EINVAL; - - hpet_tbl = (struct acpi_table_hpet *)header; + hpet_tbl = (struct acpi_table_hpet *)table; if (!hpet_tbl) { printk(KERN_WARNING PREFIX "Unable to map HPET\n"); return -ENODEV; @@ -706,35 +701,28 @@ static int __init acpi_parse_hpet(struct acpi_table_header *header) extern u32 pmtmr_ioport; #endif -static int __init acpi_parse_fadt(struct acpi_table_header *header) +static int __init acpi_parse_fadt(struct acpi_table_header *table) { - struct acpi_table_fadt *fadt = NULL; - - fadt = (struct acpi_table_fadt *)header; - if (!fadt) { - printk(KERN_WARNING PREFIX "Unable to map FADT\n"); - return 0; - } #ifdef CONFIG_X86_PM_TIMER /* detect the location of the ACPI PM Timer */ - if (fadt->header.revision >= FADT2_REVISION_ID) { + if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID) { /* FADT rev. 2 */ - if (fadt->xpm_timer_block.space_id != + if (acpi_gbl_FADT.xpm_timer_block.space_id != ACPI_ADR_SPACE_SYSTEM_IO) return 0; - pmtmr_ioport = fadt->xpm_timer_block.address; + pmtmr_ioport = acpi_gbl_FADT.xpm_timer_block.address; /* * "X" fields are optional extensions to the original V1.0 * fields, so we must selectively expand V1.0 fields if the * corresponding X field is zero. */ if (!pmtmr_ioport) - pmtmr_ioport = fadt->pm_timer_block; + pmtmr_ioport = acpi_gbl_FADT.pm_timer_block; } else { /* FADT rev. 1 */ - pmtmr_ioport = fadt->pm_timer_block; + pmtmr_ioport = acpi_gbl_FADT.pm_timer_block; } if (pmtmr_ioport) printk(KERN_INFO PREFIX "PM-Timer IO Port: %#x\n", @@ -776,13 +764,13 @@ static int __init acpi_parse_madt_lapic_entries(void) if (!cpu_has_apic) return -ENODEV; - /* + /* * Note that the LAPIC address is obtained from the MADT (32-bit value) * and (optionally) overriden by a LAPIC_ADDR_OVR entry (64-bit value). */ count = - acpi_table_parse_madt(ACPI_MADT_LAPIC_ADDR_OVR, + acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC_OVERRIDE, acpi_parse_lapic_addr_ovr, 0); if (count < 0) { printk(KERN_ERR PREFIX @@ -792,7 +780,7 @@ static int __init acpi_parse_madt_lapic_entries(void) mp_register_lapic_address(acpi_lapic_addr); - count = acpi_table_parse_madt(ACPI_MADT_LAPIC, acpi_parse_lapic, + count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC, acpi_parse_lapic, MAX_APICS); if (!count) { printk(KERN_ERR PREFIX "No LAPIC entries present\n"); @@ -805,7 +793,7 @@ static int __init acpi_parse_madt_lapic_entries(void) } count = - acpi_table_parse_madt(ACPI_MADT_LAPIC_NMI, acpi_parse_lapic_nmi, 0); + acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC_NMI, acpi_parse_lapic_nmi, 0); if (count < 0) { printk(KERN_ERR PREFIX "Error parsing LAPIC NMI entry\n"); /* TBD: Cleanup to allow fallback to MPS */ @@ -834,7 +822,7 @@ static int __init acpi_parse_madt_ioapic_entries(void) return -ENODEV; } - if (!cpu_has_apic) + if (!cpu_has_apic) return -ENODEV; /* @@ -847,7 +835,7 @@ static int __init acpi_parse_madt_ioapic_entries(void) } count = - acpi_table_parse_madt(ACPI_MADT_IOAPIC, acpi_parse_ioapic, + acpi_table_parse_madt(ACPI_MADT_TYPE_IO_APIC, acpi_parse_ioapic, MAX_IO_APICS); if (!count) { printk(KERN_ERR PREFIX "No IOAPIC entries present\n"); @@ -858,7 +846,7 @@ static int __init acpi_parse_madt_ioapic_entries(void) } count = - acpi_table_parse_madt(ACPI_MADT_INT_SRC_OVR, acpi_parse_int_src_ovr, + acpi_table_parse_madt(ACPI_MADT_TYPE_INTERRUPT_OVERRIDE, acpi_parse_int_src_ovr, NR_IRQ_VECTORS); if (count < 0) { printk(KERN_ERR PREFIX @@ -878,7 +866,7 @@ static int __init acpi_parse_madt_ioapic_entries(void) mp_config_acpi_legacy_irqs(); count = - acpi_table_parse_madt(ACPI_MADT_NMI_SRC, acpi_parse_nmi_src, + acpi_table_parse_madt(ACPI_MADT_TYPE_NMI_SOURCE, acpi_parse_nmi_src, NR_IRQ_VECTORS); if (count < 0) { printk(KERN_ERR PREFIX "Error parsing NMI SRC entry\n"); @@ -900,7 +888,7 @@ static void __init acpi_process_madt(void) #ifdef CONFIG_X86_LOCAL_APIC int count, error; - count = acpi_table_parse("APIC", acpi_parse_madt); + count = acpi_table_parse(ACPI_SIG_MADT, acpi_parse_madt); if (count >= 1) { /* @@ -1187,7 +1175,7 @@ int __init acpi_boot_table_init(void) if (acpi_disabled && !acpi_ht) return 1; - /* + /* * Initialize the ACPI boot-time table parser. */ error = acpi_table_init(); @@ -1196,7 +1184,7 @@ int __init acpi_boot_table_init(void) return error; } - acpi_table_parse("BOOT", acpi_parse_sbf); + acpi_table_parse(ACPI_SIG_BOOT, acpi_parse_sbf); /* * blacklist may disable ACPI entirely @@ -1224,7 +1212,7 @@ int __init acpi_boot_init(void) if (acpi_disabled && !acpi_ht) return 1; - acpi_table_parse("BOOT", acpi_parse_sbf); + acpi_table_parse(ACPI_SIG_BOOT, acpi_parse_sbf); /* * set sci_int and PM timer address @@ -1236,7 +1224,7 @@ int __init acpi_boot_init(void) */ acpi_process_madt(); - acpi_table_parse("HPET", acpi_parse_hpet); + acpi_table_parse(ACPI_SIG_HPET, acpi_parse_hpet); return 0; } @@ -1307,13 +1295,17 @@ static int __init setup_acpi_sci(char *s) if (!s) return -EINVAL; if (!strcmp(s, "edge")) - acpi_sci_flags.trigger = 1; + acpi_sci_flags = ACPI_MADT_TRIGGER_EDGE | + (acpi_sci_flags & ~ACPI_MADT_TRIGGER_MASK); else if (!strcmp(s, "level")) - acpi_sci_flags.trigger = 3; + acpi_sci_flags = ACPI_MADT_TRIGGER_LEVEL | + (acpi_sci_flags & ~ACPI_MADT_TRIGGER_MASK); else if (!strcmp(s, "high")) - acpi_sci_flags.polarity = 1; + acpi_sci_flags = ACPI_MADT_POLARITY_ACTIVE_HIGH | + (acpi_sci_flags & ~ACPI_MADT_POLARITY_MASK); else if (!strcmp(s, "low")) - acpi_sci_flags.polarity = 3; + acpi_sci_flags = ACPI_MADT_POLARITY_ACTIVE_LOW | + (acpi_sci_flags & ~ACPI_MADT_POLARITY_MASK); else return -EINVAL; return 0; diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index d37fb8e81898..4719e481d93b 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -55,7 +55,7 @@ #define BAD_MADT_ENTRY(entry, end) ( \ (!entry) || (unsigned long)entry + sizeof(*entry) > end || \ - ((acpi_table_entry_header *)entry)->length < sizeof(*entry)) + ((struct acpi_subtable_header *)entry)->length < sizeof(*entry)) #define PREFIX "ACPI: " @@ -94,7 +94,7 @@ const char *acpi_get_sysname(void) return "dig"; } - xsdt = (struct acpi_table_xsdt *)__va(rsdp->xsdt_address); + xsdt = (struct acpi_table_xsdt *)__va(rsdp->xsdt_physical_address); hdr = &xsdt->header; if (strncmp(hdr->signature, ACPI_SIG_XSDT, sizeof(ACPI_SIG_XSDT) - 1)) { printk(KERN_ERR @@ -169,12 +169,12 @@ struct acpi_table_madt *acpi_madt __initdata; static u8 has_8259; static int __init -acpi_parse_lapic_addr_ovr(acpi_table_entry_header * header, +acpi_parse_lapic_addr_ovr(struct acpi_subtable_header * header, const unsigned long end) { - struct acpi_table_lapic_addr_ovr *lapic; + struct acpi_madt_local_apic_override *lapic; - lapic = (struct acpi_table_lapic_addr_ovr *)header; + lapic = (struct acpi_madt_local_apic_override *)header; if (BAD_MADT_ENTRY(lapic, end)) return -EINVAL; @@ -187,21 +187,20 @@ acpi_parse_lapic_addr_ovr(acpi_table_entry_header * header, } static int __init -acpi_parse_lsapic(acpi_table_entry_header * header, const unsigned long end) +acpi_parse_lsapic(struct acpi_subtable_header * header, const unsigned long end) { - struct acpi_table_lsapic *lsapic; + struct acpi_madt_local_sapic *lsapic; - lsapic = (struct acpi_table_lsapic *)header; + lsapic = (struct acpi_madt_local_sapic *)header; - if (BAD_MADT_ENTRY(lsapic, end)) - return -EINVAL; + /*Skip BAD_MADT_ENTRY check, as lsapic size could vary */ - if (lsapic->flags.enabled) { + if (lsapic->lapic_flags & ACPI_MADT_ENABLED) { #ifdef CONFIG_SMP smp_boot_data.cpu_phys_id[available_cpus] = (lsapic->id << 8) | lsapic->eid; #endif - ia64_acpiid_to_sapicid[lsapic->acpi_id] = + ia64_acpiid_to_sapicid[lsapic->processor_id] = (lsapic->id << 8) | lsapic->eid; ++available_cpus; } @@ -211,11 +210,11 @@ acpi_parse_lsapic(acpi_table_entry_header * header, const unsigned long end) } static int __init -acpi_parse_lapic_nmi(acpi_table_entry_header * header, const unsigned long end) +acpi_parse_lapic_nmi(struct acpi_subtable_header * header, const unsigned long end) { - struct acpi_table_lapic_nmi *lacpi_nmi; + struct acpi_madt_local_apic_nmi *lacpi_nmi; - lacpi_nmi = (struct acpi_table_lapic_nmi *)header; + lacpi_nmi = (struct acpi_madt_local_apic_nmi *)header; if (BAD_MADT_ENTRY(lacpi_nmi, end)) return -EINVAL; @@ -225,11 +224,11 @@ acpi_parse_lapic_nmi(acpi_table_entry_header * header, const unsigned long end) } static int __init -acpi_parse_iosapic(acpi_table_entry_header * header, const unsigned long end) +acpi_parse_iosapic(struct acpi_subtable_header * header, const unsigned long end) { - struct acpi_table_iosapic *iosapic; + struct acpi_madt_io_sapic *iosapic; - iosapic = (struct acpi_table_iosapic *)header; + iosapic = (struct acpi_madt_io_sapic *)header; if (BAD_MADT_ENTRY(iosapic, end)) return -EINVAL; @@ -240,13 +239,13 @@ acpi_parse_iosapic(acpi_table_entry_header * header, const unsigned long end) static unsigned int __initdata acpi_madt_rev; static int __init -acpi_parse_plat_int_src(acpi_table_entry_header * header, +acpi_parse_plat_int_src(struct acpi_subtable_header * header, const unsigned long end) { - struct acpi_table_plat_int_src *plintsrc; + struct acpi_madt_interrupt_source *plintsrc; int vector; - plintsrc = (struct acpi_table_plat_int_src *)header; + plintsrc = (struct acpi_madt_interrupt_source *)header; if (BAD_MADT_ENTRY(plintsrc, end)) return -EINVAL; @@ -257,19 +256,19 @@ acpi_parse_plat_int_src(acpi_table_entry_header * header, */ vector = iosapic_register_platform_intr(plintsrc->type, plintsrc->global_irq, - plintsrc->iosapic_vector, + plintsrc->io_sapic_vector, plintsrc->eid, plintsrc->id, - (plintsrc->flags.polarity == - 1) ? IOSAPIC_POL_HIGH : - IOSAPIC_POL_LOW, - (plintsrc->flags.trigger == - 1) ? IOSAPIC_EDGE : - IOSAPIC_LEVEL); + ((plintsrc->inti_flags & ACPI_MADT_POLARITY_MASK) == + ACPI_MADT_POLARITY_ACTIVE_HIGH) ? + IOSAPIC_POL_HIGH : IOSAPIC_POL_LOW, + ((plintsrc->inti_flags & ACPI_MADT_TRIGGER_MASK) == + ACPI_MADT_TRIGGER_EDGE) ? + IOSAPIC_EDGE : IOSAPIC_LEVEL); platform_intr_list[plintsrc->type] = vector; if (acpi_madt_rev > 1) { - acpi_cpei_override = plintsrc->plint_flags.cpei_override_flag; + acpi_cpei_override = plintsrc->flags & ACPI_MADT_CPEI_OVERRIDE; } /* @@ -324,30 +323,32 @@ unsigned int get_cpei_target_cpu(void) } static int __init -acpi_parse_int_src_ovr(acpi_table_entry_header * header, +acpi_parse_int_src_ovr(struct acpi_subtable_header * header, const unsigned long end) { - struct acpi_table_int_src_ovr *p; + struct acpi_madt_interrupt_override *p; - p = (struct acpi_table_int_src_ovr *)header; + p = (struct acpi_madt_interrupt_override *)header; if (BAD_MADT_ENTRY(p, end)) return -EINVAL; - iosapic_override_isa_irq(p->bus_irq, p->global_irq, - (p->flags.polarity == - 1) ? IOSAPIC_POL_HIGH : IOSAPIC_POL_LOW, - (p->flags.trigger == - 1) ? IOSAPIC_EDGE : IOSAPIC_LEVEL); + iosapic_override_isa_irq(p->source_irq, p->global_irq, + ((p->inti_flags & ACPI_MADT_POLARITY_MASK) == + ACPI_MADT_POLARITY_ACTIVE_HIGH) ? + IOSAPIC_POL_HIGH : IOSAPIC_POL_LOW, + ((p->inti_flags & ACPI_MADT_TRIGGER_MASK) == + ACPI_MADT_TRIGGER_EDGE) ? + IOSAPIC_EDGE : IOSAPIC_LEVEL); return 0; } static int __init -acpi_parse_nmi_src(acpi_table_entry_header * header, const unsigned long end) +acpi_parse_nmi_src(struct acpi_subtable_header * header, const unsigned long end) { - struct acpi_table_nmi_src *nmi_src; + struct acpi_madt_nmi_source *nmi_src; - nmi_src = (struct acpi_table_nmi_src *)header; + nmi_src = (struct acpi_madt_nmi_source *)header; if (BAD_MADT_ENTRY(nmi_src, end)) return -EINVAL; @@ -371,12 +372,12 @@ static void __init acpi_madt_oem_check(char *oem_id, char *oem_table_id) } } -static int __init acpi_parse_madt(unsigned long phys_addr, unsigned long size) +static int __init acpi_parse_madt(struct acpi_table_header *table) { - if (!phys_addr || !size) + if (!table) return -EINVAL; - acpi_madt = (struct acpi_table_madt *)__va(phys_addr); + acpi_madt = (struct acpi_table_madt *)table; acpi_madt_rev = acpi_madt->header.revision; @@ -384,14 +385,14 @@ static int __init acpi_parse_madt(unsigned long phys_addr, unsigned long size) #ifdef CONFIG_ITANIUM has_8259 = 1; /* Firmware on old Itanium systems is broken */ #else - has_8259 = acpi_madt->flags.pcat_compat; + has_8259 = acpi_madt->flags & ACPI_MADT_PCAT_COMPAT; #endif iosapic_system_init(has_8259); /* Get base address of IPI Message Block */ - if (acpi_madt->lapic_address) - ipi_base_addr = ioremap(acpi_madt->lapic_address, 0); + if (acpi_madt->address) + ipi_base_addr = ioremap(acpi_madt->address, 0); printk(KERN_INFO PREFIX "Local APIC address %p\n", ipi_base_addr); @@ -413,23 +414,24 @@ static u32 __devinitdata pxm_flag[PXM_FLAG_LEN]; #define pxm_bit_test(bit) (test_bit(bit,(void *)pxm_flag)) static struct acpi_table_slit __initdata *slit_table; -static int get_processor_proximity_domain(struct acpi_table_processor_affinity *pa) +static int get_processor_proximity_domain(struct acpi_srat_cpu_affinity *pa) { int pxm; - pxm = pa->proximity_domain; + pxm = pa->proximity_domain_lo; if (ia64_platform_is("sn2")) - pxm += pa->reserved[0] << 8; + pxm += pa->proximity_domain_hi[0] << 8; return pxm; } -static int get_memory_proximity_domain(struct acpi_table_memory_affinity *ma) +static int get_memory_proximity_domain(struct acpi_srat_mem_affinity *ma) { int pxm; pxm = ma->proximity_domain; if (ia64_platform_is("sn2")) - pxm += ma->reserved1[0] << 8; + pxm += ma->reserved << 8; + return pxm; } @@ -442,7 +444,7 @@ void __init acpi_numa_slit_init(struct acpi_table_slit *slit) u32 len; len = sizeof(struct acpi_table_header) + 8 - + slit->localities * slit->localities; + + slit->locality_count * slit->locality_count; if (slit->header.length != len) { printk(KERN_ERR "ACPI 2.0 SLIT: size mismatch: %d expected, %d actual\n", @@ -454,11 +456,11 @@ void __init acpi_numa_slit_init(struct acpi_table_slit *slit) } void __init -acpi_numa_processor_affinity_init(struct acpi_table_processor_affinity *pa) +acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa) { int pxm; - if (!pa->flags.enabled) + if (!(pa->flags & ACPI_SRAT_CPU_ENABLED)) return; pxm = get_processor_proximity_domain(pa); @@ -467,14 +469,14 @@ acpi_numa_processor_affinity_init(struct acpi_table_processor_affinity *pa) pxm_bit_set(pxm); node_cpuid[srat_num_cpus].phys_id = - (pa->apic_id << 8) | (pa->lsapic_eid); + (pa->apic_id << 8) | (pa->local_sapic_eid); /* nid should be overridden as logical node id later */ node_cpuid[srat_num_cpus].nid = pxm; srat_num_cpus++; } void __init -acpi_numa_memory_affinity_init(struct acpi_table_memory_affinity *ma) +acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) { unsigned long paddr, size; int pxm; @@ -483,13 +485,11 @@ acpi_numa_memory_affinity_init(struct acpi_table_memory_affinity *ma) pxm = get_memory_proximity_domain(ma); /* fill node memory chunk structure */ - paddr = ma->base_addr_hi; - paddr = (paddr << 32) | ma->base_addr_lo; - size = ma->length_hi; - size = (size << 32) | ma->length_lo; + paddr = ma->base_address; + size = ma->length; /* Ignore disabled entries */ - if (!ma->flags.enabled) + if (!(ma->flags & ACPI_SRAT_MEM_ENABLED)) return; /* record this node in proximity bitmap */ @@ -560,16 +560,16 @@ void __init acpi_numa_arch_fixup(void) if (!slit_table) return; memset(numa_slit, -1, sizeof(numa_slit)); - for (i = 0; i < slit_table->localities; i++) { + for (i = 0; i < slit_table->locality_count; i++) { if (!pxm_bit_test(i)) continue; node_from = pxm_to_node(i); - for (j = 0; j < slit_table->localities; j++) { + for (j = 0; j < slit_table->locality_count; j++) { if (!pxm_bit_test(j)) continue; node_to = pxm_to_node(j); node_distance(node_from, node_to) = - slit_table->entry[i * slit_table->localities + j]; + slit_table->entry[i * slit_table->locality_count + j]; } } @@ -614,15 +614,15 @@ void acpi_unregister_gsi(u32 gsi) EXPORT_SYMBOL(acpi_unregister_gsi); -static int __init acpi_parse_fadt(unsigned long phys_addr, unsigned long size) +static int __init acpi_parse_fadt(struct acpi_table_header *table) { struct acpi_table_header *fadt_header; struct acpi_table_fadt *fadt; - if (!phys_addr || !size) + if (!table) return -EINVAL; - fadt_header = (struct acpi_table_header *)__va(phys_addr); + fadt_header = (struct acpi_table_header *)table; if (fadt_header->revision != 3) return -ENODEV; /* Only deal with ACPI 2.0 FADT */ @@ -655,7 +655,7 @@ int __init acpi_boot_init(void) * information -- the successor to MPS tables. */ - if (acpi_table_parse(ACPI_APIC, acpi_parse_madt) < 1) { + if (acpi_table_parse(ACPI_SIG_MADT, acpi_parse_madt) < 1) { printk(KERN_ERR PREFIX "Can't find MADT\n"); goto skip_madt; } @@ -663,40 +663,40 @@ int __init acpi_boot_init(void) /* Local APIC */ if (acpi_table_parse_madt - (ACPI_MADT_LAPIC_ADDR_OVR, acpi_parse_lapic_addr_ovr, 0) < 0) + (ACPI_MADT_TYPE_LOCAL_APIC_OVERRIDE, acpi_parse_lapic_addr_ovr, 0) < 0) printk(KERN_ERR PREFIX "Error parsing LAPIC address override entry\n"); - if (acpi_table_parse_madt(ACPI_MADT_LSAPIC, acpi_parse_lsapic, NR_CPUS) + if (acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_SAPIC, acpi_parse_lsapic, NR_CPUS) < 1) printk(KERN_ERR PREFIX "Error parsing MADT - no LAPIC entries\n"); - if (acpi_table_parse_madt(ACPI_MADT_LAPIC_NMI, acpi_parse_lapic_nmi, 0) + if (acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC_NMI, acpi_parse_lapic_nmi, 0) < 0) printk(KERN_ERR PREFIX "Error parsing LAPIC NMI entry\n"); /* I/O APIC */ if (acpi_table_parse_madt - (ACPI_MADT_IOSAPIC, acpi_parse_iosapic, NR_IOSAPICS) < 1) + (ACPI_MADT_TYPE_IO_SAPIC, acpi_parse_iosapic, NR_IOSAPICS) < 1) printk(KERN_ERR PREFIX "Error parsing MADT - no IOSAPIC entries\n"); /* System-Level Interrupt Routing */ if (acpi_table_parse_madt - (ACPI_MADT_PLAT_INT_SRC, acpi_parse_plat_int_src, + (ACPI_MADT_TYPE_INTERRUPT_SOURCE, acpi_parse_plat_int_src, ACPI_MAX_PLATFORM_INTERRUPTS) < 0) printk(KERN_ERR PREFIX "Error parsing platform interrupt source entry\n"); if (acpi_table_parse_madt - (ACPI_MADT_INT_SRC_OVR, acpi_parse_int_src_ovr, 0) < 0) + (ACPI_MADT_TYPE_INTERRUPT_OVERRIDE, acpi_parse_int_src_ovr, 0) < 0) printk(KERN_ERR PREFIX "Error parsing interrupt source overrides entry\n"); - if (acpi_table_parse_madt(ACPI_MADT_NMI_SRC, acpi_parse_nmi_src, 0) < 0) + if (acpi_table_parse_madt(ACPI_MADT_TYPE_NMI_SOURCE, acpi_parse_nmi_src, 0) < 0) printk(KERN_ERR PREFIX "Error parsing NMI SRC entry\n"); skip_madt: @@ -706,7 +706,7 @@ int __init acpi_boot_init(void) * gets interrupts such as power and sleep buttons. If it's not * on a Legacy interrupt, it needs to be setup. */ - if (acpi_table_parse(ACPI_FADT, acpi_parse_fadt) < 1) + if (acpi_table_parse(ACPI_SIG_FADT, acpi_parse_fadt) < 1) printk(KERN_ERR PREFIX "Can't find FADT\n"); #ifdef CONFIG_SMP @@ -839,7 +839,7 @@ int acpi_map_lsapic(acpi_handle handle, int *pcpu) { struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; union acpi_object *obj; - struct acpi_table_lsapic *lsapic; + struct acpi_madt_local_sapic *lsapic; cpumask_t tmp_map; long physid; int cpu; @@ -851,16 +851,16 @@ int acpi_map_lsapic(acpi_handle handle, int *pcpu) return -EINVAL; obj = buffer.pointer; - if (obj->type != ACPI_TYPE_BUFFER || - obj->buffer.length < sizeof(*lsapic)) { + if (obj->type != ACPI_TYPE_BUFFER) + { kfree(buffer.pointer); return -EINVAL; } - lsapic = (struct acpi_table_lsapic *)obj->buffer.pointer; + lsapic = (struct acpi_madt_local_sapic *)obj->buffer.pointer; - if ((lsapic->header.type != ACPI_MADT_LSAPIC) || - (!lsapic->flags.enabled)) { + if ((lsapic->header.type != ACPI_MADT_TYPE_LOCAL_SAPIC) || + (!lsapic->lapic_flags & ACPI_MADT_ENABLED)) { kfree(buffer.pointer); return -EINVAL; } @@ -880,7 +880,7 @@ int acpi_map_lsapic(acpi_handle handle, int *pcpu) cpu_set(cpu, cpu_present_map); ia64_cpu_to_sapicid[cpu] = physid; - ia64_acpiid_to_sapicid[lsapic->acpi_id] = ia64_cpu_to_sapicid[cpu]; + ia64_acpiid_to_sapicid[lsapic->processor_id] = ia64_cpu_to_sapicid[cpu]; *pcpu = cpu; return (0); @@ -917,7 +917,7 @@ acpi_map_iosapic(acpi_handle handle, u32 depth, void *context, void **ret) { struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; union acpi_object *obj; - struct acpi_table_iosapic *iosapic; + struct acpi_madt_io_sapic *iosapic; unsigned int gsi_base; int pxm, node; @@ -935,9 +935,9 @@ acpi_map_iosapic(acpi_handle handle, u32 depth, void *context, void **ret) return AE_OK; } - iosapic = (struct acpi_table_iosapic *)obj->buffer.pointer; + iosapic = (struct acpi_madt_io_sapic *)obj->buffer.pointer; - if (iosapic->header.type != ACPI_MADT_IOSAPIC) { + if (iosapic->header.type != ACPI_MADT_TYPE_IO_SAPIC) { kfree(buffer.pointer); return AE_OK; } -- cgit v1.2.3 From 15a58ed12142939d51076380e6e58af477ad96ec Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Fri, 2 Feb 2007 19:48:22 +0300 Subject: ACPICA: Remove duplicate table definitions (non-conflicting), cont Signed-off-by: Len Brown --- arch/i386/kernel/acpi/boot.c | 18 ++++++-------- arch/i386/kernel/acpi/earlyquirk.c | 2 +- arch/i386/pci/mmconfig.c | 24 +++++++++---------- arch/x86_64/kernel/early-quirks.c | 4 ++-- arch/x86_64/mm/srat.c | 48 ++++++++++++++++++++------------------ arch/x86_64/pci/mmconfig.c | 29 ++++++++++++----------- 6 files changed, 62 insertions(+), 63 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c index 5fafbacdd4cb..2147511ea78d 100644 --- a/arch/i386/kernel/acpi/boot.c +++ b/arch/i386/kernel/acpi/boot.c @@ -166,7 +166,7 @@ char *__acpi_map_table(unsigned long phys, unsigned long size) #ifdef CONFIG_PCI_MMCONFIG /* The physical address of the MMCONFIG aperture. Set from ACPI tables. */ -struct acpi_table_mcfg_config *pci_mmcfg_config; +struct acpi_mcfg_allocation *pci_mmcfg_config; int pci_mmcfg_config_num; int __init acpi_parse_mcfg(struct acpi_table_header *header) @@ -179,17 +179,13 @@ int __init acpi_parse_mcfg(struct acpi_table_header *header) return -EINVAL; mcfg = (struct acpi_table_mcfg *)header; - if (!mcfg) { - printk(KERN_WARNING PREFIX "Unable to map MCFG\n"); - return -ENODEV; - } /* how many config structures do we have */ pci_mmcfg_config_num = 0; i = header->length - sizeof(struct acpi_table_mcfg); - while (i >= sizeof(struct acpi_table_mcfg_config)) { + while (i >= sizeof(struct acpi_mcfg_allocation)) { ++pci_mmcfg_config_num; - i -= sizeof(struct acpi_table_mcfg_config); + i -= sizeof(struct acpi_mcfg_allocation); }; if (pci_mmcfg_config_num == 0) { printk(KERN_ERR PREFIX "MMCONFIG has no entries\n"); @@ -206,7 +202,7 @@ int __init acpi_parse_mcfg(struct acpi_table_header *header) memcpy(pci_mmcfg_config, &mcfg[1], config_size); for (i = 0; i < pci_mmcfg_config_num; ++i) { - if (pci_mmcfg_config[i].base_reserved) { + if (pci_mmcfg_config[i].address > 0xFFFFFFFF) { printk(KERN_ERR PREFIX "MMCONFIG not in low 4GB of memory\n"); kfree(pci_mmcfg_config); @@ -220,14 +216,14 @@ int __init acpi_parse_mcfg(struct acpi_table_header *header) #endif /* CONFIG_PCI_MMCONFIG */ #ifdef CONFIG_X86_LOCAL_APIC -static int __init acpi_parse_madt(struct acpi_table_header *header) +static int __init acpi_parse_madt(struct acpi_table_header *table) { struct acpi_table_madt *madt = NULL; - if (!header|| !cpu_has_apic) + if (!cpu_has_apic) return -EINVAL; - madt = (struct acpi_table_madt *)header; + madt = (struct acpi_table_madt *)table; if (!madt) { printk(KERN_WARNING PREFIX "Unable to map MADT\n"); return -ENODEV; diff --git a/arch/i386/kernel/acpi/earlyquirk.c b/arch/i386/kernel/acpi/earlyquirk.c index 4261c8501b7e..bf86f7662d8b 100644 --- a/arch/i386/kernel/acpi/earlyquirk.c +++ b/arch/i386/kernel/acpi/earlyquirk.c @@ -30,7 +30,7 @@ static int __init check_bridge(int vendor, int device) is enabled. */ if (!acpi_use_timer_override && vendor == PCI_VENDOR_ID_NVIDIA) { nvidia_hpet_detected = 0; - acpi_table_parse("HPET", nvidia_hpet_check); + acpi_table_parse(ACPI_SIG_HPET, nvidia_hpet_check); if (nvidia_hpet_detected == 0) { acpi_skip_timer_override = 1; printk(KERN_INFO "Nvidia board " diff --git a/arch/i386/pci/mmconfig.c b/arch/i386/pci/mmconfig.c index 80522e331e34..5700220dcf5f 100644 --- a/arch/i386/pci/mmconfig.c +++ b/arch/i386/pci/mmconfig.c @@ -36,7 +36,7 @@ static DECLARE_BITMAP(fallback_slots, MAX_CHECK_BUS*32); static u32 get_base_addr(unsigned int seg, int bus, unsigned devfn) { int cfg_num = -1; - struct acpi_table_mcfg_config *cfg; + struct acpi_mcfg_allocation *cfg; if (seg == 0 && bus < MAX_CHECK_BUS && test_bit(PCI_SLOT(devfn) + 32*bus, fallback_slots)) @@ -48,11 +48,11 @@ static u32 get_base_addr(unsigned int seg, int bus, unsigned devfn) break; } cfg = &pci_mmcfg_config[cfg_num]; - if (cfg->pci_segment_group_number != seg) + if (cfg->pci_segment != seg) continue; if ((cfg->start_bus_number <= bus) && (cfg->end_bus_number >= bus)) - return cfg->base_address; + return cfg->address; } /* Handle more broken MCFG tables on Asus etc. @@ -60,9 +60,9 @@ static u32 get_base_addr(unsigned int seg, int bus, unsigned devfn) this applies to all busses. */ cfg = &pci_mmcfg_config[0]; if (pci_mmcfg_config_num == 1 && - cfg->pci_segment_group_number == 0 && + cfg->pci_segment == 0 && (cfg->start_bus_number | cfg->end_bus_number) == 0) - return cfg->base_address; + return cfg->address; /* Fall back to type 0 */ return 0; @@ -125,7 +125,7 @@ static int pci_mmcfg_write(unsigned int seg, unsigned int bus, unsigned long flags; u32 base; - if ((bus > 255) || (devfn > 255) || (reg > 4095)) + if ((bus > 255) || (devfn > 255) || (reg > 4095)) return -EINVAL; base = get_base_addr(seg, bus, devfn); @@ -199,19 +199,19 @@ void __init pci_mmcfg_init(int type) if ((pci_probe & PCI_PROBE_MMCONF) == 0) return; - acpi_table_parse("MCFG", acpi_parse_mcfg); + acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg); if ((pci_mmcfg_config_num == 0) || (pci_mmcfg_config == NULL) || - (pci_mmcfg_config[0].base_address == 0)) + (pci_mmcfg_config[0].address == 0)) return; /* Only do this check when type 1 works. If it doesn't work assume we run on a Mac and always use MCFG */ - if (type == 1 && !e820_all_mapped(pci_mmcfg_config[0].base_address, - pci_mmcfg_config[0].base_address + MMCONFIG_APER_MIN, + if (type == 1 && !e820_all_mapped(pci_mmcfg_config[0].address, + pci_mmcfg_config[0].address + MMCONFIG_APER_MIN, E820_RESERVED)) { - printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %x is not E820-reserved\n", - pci_mmcfg_config[0].base_address); + printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %lx is not E820-reserved\n", + (unsigned long)pci_mmcfg_config[0].address); printk(KERN_ERR "PCI: Not using MMCONFIG.\n"); return; } diff --git a/arch/x86_64/kernel/early-quirks.c b/arch/x86_64/kernel/early-quirks.c index 49802f1bee94..bd30d138113f 100644 --- a/arch/x86_64/kernel/early-quirks.c +++ b/arch/x86_64/kernel/early-quirks.c @@ -32,7 +32,7 @@ static void via_bugs(void) static int nvidia_hpet_detected __initdata; -static int __init nvidia_hpet_check(unsigned long phys, unsigned long size) +static int __init nvidia_hpet_check(struct acpi_table_header *header) { nvidia_hpet_detected = 1; return 0; @@ -53,7 +53,7 @@ static void nvidia_bugs(void) return; nvidia_hpet_detected = 0; - acpi_table_parse(ACPI_HPET, nvidia_hpet_check); + acpi_table_parse(ACPI_SIG_HPET, nvidia_hpet_check); if (nvidia_hpet_detected == 0) { acpi_skip_timer_override = 1; printk(KERN_INFO "Nvidia board " diff --git a/arch/x86_64/mm/srat.c b/arch/x86_64/mm/srat.c index 1087e150a218..2efe215fc76a 100644 --- a/arch/x86_64/mm/srat.c +++ b/arch/x86_64/mm/srat.c @@ -101,7 +101,7 @@ static __init inline int srat_disabled(void) static __init int slit_valid(struct acpi_table_slit *slit) { int i, j; - int d = slit->localities; + int d = slit->locality_count; for (i = 0; i < d; i++) { for (j = 0; j < d; j++) { u8 val = slit->entry[d*i + j]; @@ -127,18 +127,18 @@ void __init acpi_numa_slit_init(struct acpi_table_slit *slit) /* Callback for Proximity Domain -> LAPIC mapping */ void __init -acpi_numa_processor_affinity_init(struct acpi_table_processor_affinity *pa) +acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa) { int pxm, node; if (srat_disabled()) return; - if (pa->header.length != sizeof(struct acpi_table_processor_affinity)) { + if (pa->header.length != sizeof(struct acpi_srat_cpu_affinity)) { bad_srat(); return; } - if (pa->flags.enabled == 0) + if ((pa->flags & ACPI_SRAT_CPU_ENABLED) == 0) return; - pxm = pa->proximity_domain; + pxm = pa->proximity_domain_lo; node = setup_node(pxm); if (node < 0) { printk(KERN_ERR "SRAT: Too many proximity domains %x\n", pxm); @@ -254,21 +254,21 @@ static int reserve_hotadd(int node, unsigned long start, unsigned long end) /* Looks good */ if (nd->start == nd->end) { - nd->start = start; - nd->end = end; + nd->start = start; + nd->end = end; changed = 1; - } else { - if (nd->start == end) { - nd->start = start; + } else { + if (nd->start == end) { + nd->start = start; changed = 1; } - if (nd->end == start) { - nd->end = end; + if (nd->end == start) { + nd->end = end; changed = 1; } if (!changed) printk(KERN_ERR "SRAT: Hotplug zone not continuous. Partly ignored\n"); - } + } ret = update_end_of_memory(nd->end); @@ -279,7 +279,7 @@ static int reserve_hotadd(int node, unsigned long start, unsigned long end) /* Callback for parsing of the Proximity Domain <-> Memory Area mappings */ void __init -acpi_numa_memory_affinity_init(struct acpi_table_memory_affinity *ma) +acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) { struct bootnode *nd, oldnode; unsigned long start, end; @@ -288,16 +288,17 @@ acpi_numa_memory_affinity_init(struct acpi_table_memory_affinity *ma) if (srat_disabled()) return; - if (ma->header.length != sizeof(struct acpi_table_memory_affinity)) { + if (ma->header.length != sizeof(struct acpi_srat_mem_affinity)) { bad_srat(); return; } - if (ma->flags.enabled == 0) + if ((ma->flags & ACPI_SRAT_MEM_ENABLED) == 0) return; - if (ma->flags.hot_pluggable && !save_add_info()) + + if ((ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) && !save_add_info()) return; - start = ma->base_addr_lo | ((u64)ma->base_addr_hi << 32); - end = start + (ma->length_lo | ((u64)ma->length_hi << 32)); + start = ma->base_address; + end = start + ma->length; pxm = ma->proximity_domain; node = setup_node(pxm); if (node < 0) { @@ -337,7 +338,8 @@ acpi_numa_memory_affinity_init(struct acpi_table_memory_affinity *ma) push_node_boundaries(node, nd->start >> PAGE_SHIFT, nd->end >> PAGE_SHIFT); - if (ma->flags.hot_pluggable && (reserve_hotadd(node, start, end) < 0)) { + if ((ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) && + (reserve_hotadd(node, start, end) < 0)) { /* Ignore hotadd region. Undo damage */ printk(KERN_NOTICE "SRAT: Hotplug region ignored\n"); *nd = oldnode; @@ -394,7 +396,7 @@ int __init acpi_scan_nodes(unsigned long start, unsigned long end) /* First clean up the node list */ for (i = 0; i < MAX_NUMNODES; i++) { - cutoff_node(i, start, end); + cutoff_node(i, start, end); if ((nodes[i].end - nodes[i].start) < NODE_MIN_SIZE) { unparse_node(i); node_set_offline(i); @@ -426,7 +428,7 @@ int __init acpi_scan_nodes(unsigned long start, unsigned long end) if (!node_online(i)) setup_node_bootmem(i, nodes[i].start, nodes[i].end); - for (i = 0; i < NR_CPUS; i++) { + for (i = 0; i < NR_CPUS; i++) { if (cpu_to_node[i] == NUMA_NO_NODE) continue; if (!node_isset(cpu_to_node[i], nodes_parsed)) @@ -461,7 +463,7 @@ int __node_distance(int a, int b) if (!acpi_slit) return a == b ? 10 : 20; - index = acpi_slit->localities * node_to_pxm(a); + index = acpi_slit->locality_count * node_to_pxm(a); return acpi_slit->entry[index + node_to_pxm(b)]; } diff --git a/arch/x86_64/pci/mmconfig.c b/arch/x86_64/pci/mmconfig.c index f8b6b2800a62..faabb6e87f12 100644 --- a/arch/x86_64/pci/mmconfig.c +++ b/arch/x86_64/pci/mmconfig.c @@ -1,6 +1,6 @@ /* * mmconfig.c - Low-level direct PCI config space access via MMCONFIG - * + * * This is an 64bit optimized version that always keeps the full mmconfig * space mapped. This allows lockless config space operation. */ @@ -25,7 +25,7 @@ static DECLARE_BITMAP(fallback_slots, 32*MAX_CHECK_BUS); /* Static virtual mapping of the MMCONFIG aperture */ struct mmcfg_virt { - struct acpi_table_mcfg_config *cfg; + struct acpi_mcfg_allocation *cfg; char __iomem *virt; }; static struct mmcfg_virt *pci_mmcfg_virt; @@ -33,14 +33,14 @@ static struct mmcfg_virt *pci_mmcfg_virt; static char __iomem *get_virt(unsigned int seg, unsigned bus) { int cfg_num = -1; - struct acpi_table_mcfg_config *cfg; + struct acpi_mcfg_allocation *cfg; while (1) { ++cfg_num; if (cfg_num >= pci_mmcfg_config_num) break; cfg = pci_mmcfg_virt[cfg_num].cfg; - if (cfg->pci_segment_group_number != seg) + if (cfg->pci_segment != seg) continue; if ((cfg->start_bus_number <= bus) && (cfg->end_bus_number >= bus)) @@ -52,7 +52,7 @@ static char __iomem *get_virt(unsigned int seg, unsigned bus) this applies to all busses. */ cfg = &pci_mmcfg_config[0]; if (pci_mmcfg_config_num == 1 && - cfg->pci_segment_group_number == 0 && + cfg->pci_segment == 0 && (cfg->start_bus_number | cfg->end_bus_number) == 0) return pci_mmcfg_virt[0].virt; @@ -170,19 +170,19 @@ void __init pci_mmcfg_init(int type) if ((pci_probe & PCI_PROBE_MMCONF) == 0) return; - acpi_table_parse(ACPI_MCFG, acpi_parse_mcfg); + acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg); if ((pci_mmcfg_config_num == 0) || (pci_mmcfg_config == NULL) || - (pci_mmcfg_config[0].base_address == 0)) + (pci_mmcfg_config[0].address == 0)) return; /* Only do this check when type 1 works. If it doesn't work assume we run on a Mac and always use MCFG */ - if (type == 1 && !e820_all_mapped(pci_mmcfg_config[0].base_address, - pci_mmcfg_config[0].base_address + MMCONFIG_APER_MIN, + if (type == 1 && !e820_all_mapped(pci_mmcfg_config[0].address, + pci_mmcfg_config[0].address + MMCONFIG_APER_MIN, E820_RESERVED)) { - printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %x is not E820-reserved\n", - pci_mmcfg_config[0].base_address); + printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %lx is not E820-reserved\n", + (unsigned long)pci_mmcfg_config[0].address); printk(KERN_ERR "PCI: Not using MMCONFIG.\n"); return; } @@ -194,15 +194,16 @@ void __init pci_mmcfg_init(int type) } for (i = 0; i < pci_mmcfg_config_num; ++i) { pci_mmcfg_virt[i].cfg = &pci_mmcfg_config[i]; - pci_mmcfg_virt[i].virt = ioremap_nocache(pci_mmcfg_config[i].base_address, + pci_mmcfg_virt[i].virt = ioremap_nocache(pci_mmcfg_config[i].address, MMCONFIG_APER_MAX); if (!pci_mmcfg_virt[i].virt) { printk(KERN_ERR "PCI: Cannot map mmconfig aperture for " "segment %d\n", - pci_mmcfg_config[i].pci_segment_group_number); + pci_mmcfg_config[i].pci_segment); return; } - printk(KERN_INFO "PCI: Using MMCONFIG at %x\n", pci_mmcfg_config[i].base_address); + printk(KERN_INFO "PCI: Using MMCONFIG at %lx\n", + (unsigned long)pci_mmcfg_config[i].address); } unreachable_devices(); -- cgit v1.2.3 From f18c5a08bf035b51939281f5b49aa3ae45cea6ce Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Fri, 2 Feb 2007 19:48:23 +0300 Subject: ACPICA: Allow ACPI id to be u32 instead of u8. Allow ACPI id to be u32 instead of u8. Requires drop of conversion tables with the acpiid as index. Signed-off-by: Len Brown --- arch/i386/kernel/acpi/boot.c | 17 ----------------- arch/ia64/kernel/acpi.c | 16 ---------------- 2 files changed, 33 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c index 2147511ea78d..e94aff6888ca 100644 --- a/arch/i386/kernel/acpi/boot.c +++ b/arch/i386/kernel/acpi/boot.c @@ -92,11 +92,6 @@ static u64 acpi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE; #warning ACPI uses CMPXCHG, i486 and later hardware #endif -#define MAX_MADT_ENTRIES 256 -u8 x86_acpiid_to_apicid[MAX_MADT_ENTRIES] = - {[0 ... MAX_MADT_ENTRIES - 1] = 0xff }; -EXPORT_SYMBOL(x86_acpiid_to_apicid); - /* -------------------------------------------------------------------------- Boot-time Configuration -------------------------------------------------------------------------- */ @@ -253,10 +248,6 @@ acpi_parse_lapic(struct acpi_subtable_header * header, const unsigned long end) acpi_table_print_madt_entry(header); - /* Record local apic id only when enabled */ - if (processor->lapic_flags & ACPI_MADT_ENABLED) - x86_acpiid_to_apicid[processor->processor_id] = processor->id; - /* * We need to register disabled CPU as well to permit * counting disabled CPUs. This allows us to size @@ -563,14 +554,6 @@ EXPORT_SYMBOL(acpi_map_lsapic); int acpi_unmap_lsapic(int cpu) { - int i; - - for_each_possible_cpu(i) { - if (x86_acpiid_to_apicid[i] == x86_cpu_to_apicid[cpu]) { - x86_acpiid_to_apicid[i] = -1; - break; - } - } x86_cpu_to_apicid[cpu] = -1; cpu_clear(cpu, cpu_present_map); num_processors--; diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index 4719e481d93b..989ffc3f7ce3 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -67,11 +67,6 @@ EXPORT_SYMBOL(pm_power_off); unsigned int acpi_cpei_override; unsigned int acpi_cpei_phys_cpuid; -#define MAX_SAPICS 256 -u16 ia64_acpiid_to_sapicid[MAX_SAPICS] = {[0 ... MAX_SAPICS - 1] = -1 }; - -EXPORT_SYMBOL(ia64_acpiid_to_sapicid); - const char *acpi_get_sysname(void) { #ifdef CONFIG_IA64_GENERIC @@ -200,8 +195,6 @@ acpi_parse_lsapic(struct acpi_subtable_header * header, const unsigned long end) smp_boot_data.cpu_phys_id[available_cpus] = (lsapic->id << 8) | lsapic->eid; #endif - ia64_acpiid_to_sapicid[lsapic->processor_id] = - (lsapic->id << 8) | lsapic->eid; ++available_cpus; } @@ -880,7 +873,6 @@ int acpi_map_lsapic(acpi_handle handle, int *pcpu) cpu_set(cpu, cpu_present_map); ia64_cpu_to_sapicid[cpu] = physid; - ia64_acpiid_to_sapicid[lsapic->processor_id] = ia64_cpu_to_sapicid[cpu]; *pcpu = cpu; return (0); @@ -890,14 +882,6 @@ EXPORT_SYMBOL(acpi_map_lsapic); int acpi_unmap_lsapic(int cpu) { - int i; - - for (i = 0; i < MAX_SAPICS; i++) { - if (ia64_acpiid_to_sapicid[i] == ia64_cpu_to_sapicid[cpu]) { - ia64_acpiid_to_sapicid[i] = -1; - break; - } - } ia64_cpu_to_sapicid[cpu] = -1; cpu_clear(cpu, cpu_present_map); -- cgit v1.2.3 From 0e5683350f5bcd23d5d579f91d488caeda432617 Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Fri, 2 Feb 2007 21:37:53 -0500 Subject: ACPI: build fix for IBM x440 - CONFIG_X86_SUMMIT i386 srat.c broke due to re-names from ACPICA table-manager re-write. Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- arch/i386/kernel/srat.c | 84 ++++++++++++++++++++++++------------------------- 1 file changed, 41 insertions(+), 43 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/srat.c b/arch/i386/kernel/srat.c index f7e735c077c3..2a8713ec0f9a 100644 --- a/arch/i386/kernel/srat.c +++ b/arch/i386/kernel/srat.c @@ -62,19 +62,19 @@ extern void * boot_ioremap(unsigned long, unsigned long); /* Identify CPU proximity domains */ static void __init parse_cpu_affinity_structure(char *p) { - struct acpi_table_processor_affinity *cpu_affinity = - (struct acpi_table_processor_affinity *) p; + struct acpi_srat_cpu_affinity *cpu_affinity = + (struct acpi_srat_cpu_affinity *) p; - if (!cpu_affinity->flags.enabled) + if ((cpu_affinity->flags & ACPI_SRAT_CPU_ENABLED) == 0) return; /* empty entry */ /* mark this node as "seen" in node bitmap */ - BMAP_SET(pxm_bitmap, cpu_affinity->proximity_domain); + BMAP_SET(pxm_bitmap, cpu_affinity->proximity_domain_lo); - apicid_to_pxm[cpu_affinity->apic_id] = cpu_affinity->proximity_domain; + apicid_to_pxm[cpu_affinity->apic_id] = cpu_affinity->proximity_domain_lo; printk("CPU 0x%02X in proximity domain 0x%02X\n", - cpu_affinity->apic_id, cpu_affinity->proximity_domain); + cpu_affinity->apic_id, cpu_affinity->proximity_domain_lo); } /* @@ -84,28 +84,27 @@ static void __init parse_cpu_affinity_structure(char *p) static void __init parse_memory_affinity_structure (char *sratp) { unsigned long long paddr, size; - unsigned long start_pfn, end_pfn; + unsigned long start_pfn, end_pfn; u8 pxm; struct node_memory_chunk_s *p, *q, *pend; - struct acpi_table_memory_affinity *memory_affinity = - (struct acpi_table_memory_affinity *) sratp; + struct acpi_srat_mem_affinity *memory_affinity = + (struct acpi_srat_mem_affinity *) sratp; - if (!memory_affinity->flags.enabled) + if ((memory_affinity->flags & ACPI_SRAT_MEM_ENABLED) == 0) return; /* empty entry */ + pxm = memory_affinity->proximity_domain & 0xff; + /* mark this node as "seen" in node bitmap */ - BMAP_SET(pxm_bitmap, memory_affinity->proximity_domain); + BMAP_SET(pxm_bitmap, pxm); /* calculate info for memory chunk structure */ - paddr = memory_affinity->base_addr_hi; - paddr = (paddr << 32) | memory_affinity->base_addr_lo; - size = memory_affinity->length_hi; - size = (size << 32) | memory_affinity->length_lo; - + paddr = memory_affinity->base_address; + size = memory_affinity->length; + start_pfn = paddr >> PAGE_SHIFT; end_pfn = (paddr + size) >> PAGE_SHIFT; - - pxm = memory_affinity->proximity_domain; + if (num_memory_chunks >= MAXCHUNKS) { printk("Too many mem chunks in SRAT. Ignoring %lld MBytes at %llx\n", @@ -132,8 +131,8 @@ static void __init parse_memory_affinity_structure (char *sratp) printk("Memory range 0x%lX to 0x%lX (type 0x%X) in proximity domain 0x%02X %s\n", start_pfn, end_pfn, memory_affinity->memory_type, - memory_affinity->proximity_domain, - (memory_affinity->flags.hot_pluggable ? + pxm, + ((memory_affinity->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) ? "enabled and removable" : "enabled" ) ); } @@ -185,10 +184,10 @@ static int __init acpi20_parse_srat(struct acpi_table_srat *sratp) num_memory_chunks = 0; while (p < end) { switch (*p) { - case ACPI_SRAT_PROCESSOR_AFFINITY: + case ACPI_SRAT_TYPE_CPU_AFFINITY: parse_cpu_affinity_structure(p); break; - case ACPI_SRAT_MEMORY_AFFINITY: + case ACPI_SRAT_TYPE_MEMORY_AFFINITY: parse_memory_affinity_structure(p); break; default: @@ -262,31 +261,30 @@ out_fail: return 0; } +struct acpi_static_rsdt { + struct acpi_table_rsdt table; + u32 padding[7]; /* Allow for 7 more table entries */ +}; + int __init get_memcfg_from_srat(void) { struct acpi_table_header *header = NULL; struct acpi_table_rsdp *rsdp = NULL; struct acpi_table_rsdt *rsdt = NULL; - struct acpi_pointer *rsdp_address = NULL; - struct acpi_table_rsdt saved_rsdt; + acpi_native_uint rsdp_address = 0; + struct acpi_static_rsdt saved_rsdt; int tables = 0; int i = 0; - if (ACPI_FAILURE(acpi_find_root_pointer(ACPI_PHYSICAL_ADDRESSING, - rsdp_address))) { + rsdp_address = acpi_find_rsdp(); + if (!rsdp_address) { printk("%s: System description tables not found\n", __FUNCTION__); goto out_err; } - if (rsdp_address->pointer_type == ACPI_PHYSICAL_POINTER) { - printk("%s: assigning address to rsdp\n", __FUNCTION__); - rsdp = (struct acpi_table_rsdp *) - (u32)rsdp_address->pointer.physical; - } else { - printk("%s: rsdp_address is not a physical pointer\n", __FUNCTION__); - goto out_err; - } + printk("%s: assigning address to rsdp\n", __FUNCTION__); + rsdp = (struct acpi_table_rsdp *)(u32)rsdp_address; if (!rsdp) { printk("%s: Didn't find ACPI root!\n", __FUNCTION__); goto out_err; @@ -295,13 +293,13 @@ int __init get_memcfg_from_srat(void) printk(KERN_INFO "%.8s v%d [%.6s]\n", rsdp->signature, rsdp->revision, rsdp->oem_id); - if (strncmp(rsdp->signature, RSDP_SIG,strlen(RSDP_SIG))) { + if (strncmp(rsdp->signature, ACPI_SIG_RSDP,strlen(ACPI_SIG_RSDP))) { printk(KERN_WARNING "%s: RSDP table signature incorrect\n", __FUNCTION__); goto out_err; } rsdt = (struct acpi_table_rsdt *) - boot_ioremap(rsdp->rsdt_address, sizeof(struct acpi_table_rsdt)); + boot_ioremap(rsdp->rsdt_physical_address, sizeof(struct acpi_table_rsdt)); if (!rsdt) { printk(KERN_WARNING @@ -310,9 +308,9 @@ int __init get_memcfg_from_srat(void) goto out_err; } - header = & rsdt->header; + header = &rsdt->header; - if (strncmp(header->signature, RSDT_SIG, strlen(RSDT_SIG))) { + if (strncmp(header->signature, ACPI_SIG_RSDT, strlen(ACPI_SIG_RSDT))) { printk(KERN_WARNING "ACPI: RSDT signature incorrect\n"); goto out_err; } @@ -330,9 +328,9 @@ int __init get_memcfg_from_srat(void) memcpy(&saved_rsdt, rsdt, sizeof(saved_rsdt)); - if (saved_rsdt.header.length > sizeof(saved_rsdt)) { + if (saved_rsdt.table.header.length > sizeof(saved_rsdt)) { printk(KERN_WARNING "ACPI: Too big length in RSDT: %d\n", - saved_rsdt.header.length); + saved_rsdt.table.header.length); goto out_err; } @@ -341,15 +339,15 @@ int __init get_memcfg_from_srat(void) for (i = 0; i < tables; i++) { /* Map in header, then map in full table length. */ header = (struct acpi_table_header *) - boot_ioremap(saved_rsdt.entry[i], sizeof(struct acpi_table_header)); + boot_ioremap(saved_rsdt.table.table_offset_entry[i], sizeof(struct acpi_table_header)); if (!header) break; header = (struct acpi_table_header *) - boot_ioremap(saved_rsdt.entry[i], header->length); + boot_ioremap(saved_rsdt.table.table_offset_entry[i], header->length); if (!header) break; - if (strncmp((char *) &header->signature, "SRAT", 4)) + if (strncmp((char *) &header->signature, ACPI_SIG_SRAT, 4)) continue; /* we've found the srat table. don't need to look at any more tables */ -- cgit v1.2.3 From defad23020bb7701b3ad414135c73fc03054507b Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Fri, 2 Feb 2007 22:02:55 -0500 Subject: ACPI_NUMA: fix HP IA64 simulator issue with extended memory domain ACPI 3.0 incorporated the SRAT spec, upping the table version to 2, and extending the size of the proximity domain from 1-byte to 4-bytes. This extension was into a reserved field that firmware should set to 0, but the HP simulator had non-zero values there resulting in unexpected huge numbers. So mask the domain down to 8-bits for now. A more general fix will be to check the table version supplied by firmware and get paranoid about reserved fields. Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- arch/ia64/kernel/acpi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index 989ffc3f7ce3..a99b0cc92881 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -422,8 +422,8 @@ static int get_memory_proximity_domain(struct acpi_srat_mem_affinity *ma) int pxm; pxm = ma->proximity_domain; - if (ia64_platform_is("sn2")) - pxm += ma->reserved << 8; + if (!ia64_platform_is("sn2")) + pxm &= 0xff; return pxm; } -- cgit v1.2.3 From 647fb47dfabeffd2f1706013ebf5cfc92b70d273 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Fri, 2 Feb 2007 22:14:22 -0500 Subject: ACPICA: reduce conflicts with Altix patch series Syntax only -- no functional changes. Signed-off-by: Len Brown --- arch/ia64/sn/kernel/io_common.c | 18 ++++++++++++------ arch/ia64/sn/kernel/iomv.c | 5 ++--- 2 files changed, 14 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/ia64/sn/kernel/io_common.c b/arch/ia64/sn/kernel/io_common.c index 65979f1fb353..75f0379958f9 100644 --- a/arch/ia64/sn/kernel/io_common.c +++ b/arch/ia64/sn/kernel/io_common.c @@ -25,6 +25,7 @@ #include "xtalk/xwidgetdev.h" #include #include +#include extern void sn_init_cpei_timer(void); extern void register_sn_procfs(void); @@ -36,6 +37,7 @@ extern void sn_legacy_pci_window_fixup(struct pci_controller *, u64, u64); extern void sn_io_acpi_init(void); extern void sn_io_init(void); + static struct list_head sn_sysdata_list; /* sysdata list struct */ @@ -48,7 +50,7 @@ int sn_ioif_inited; /* SN I/O infrastructure initialized? */ struct sn_pcibus_provider *sn_pci_provider[PCIIO_ASIC_MAX_TYPES]; /* indexed by asic type */ -int sn_acpi_base_support() +int sn_acpi_base_support(void) { struct acpi_table_header *header; (void)acpi_get_table_by_index(ACPI_TABLE_INDEX_DSDT, &header); @@ -293,7 +295,7 @@ void sn_pci_fixup_slot(struct pci_dev *dev) list_add_tail(&pcidev_info->pdi_list, &(SN_PLATFORM_DATA(dev->bus)->pcidev_info)); - if (sn_acpi_base_support()) + if (SN_ACPI_BASE_SUPPORT()) sn_acpi_slot_fixup(dev, pcidev_info); else sn_more_slot_fixup(dev, pcidev_info); @@ -505,7 +507,7 @@ void __devinit sn_pci_fixup_bus(struct pci_bus *bus) { - if (sn_acpi_base_support()) + if (SN_ACPI_BASE_SUPPORT()) sn_acpi_bus_fixup(bus); else sn_bus_fixup(bus); @@ -551,9 +553,13 @@ sn_io_early_init(void) register_sn_procfs(); #endif - printk(KERN_INFO "ACPI DSDT OEM Rev 0x%x\n", - acpi_gbl_DSDT->oem_revision); - if (sn_acpi_base_support()) + { + struct acpi_table_header *header; + (void)acpi_get_table_by_index(ACPI_TABLE_INDEX_DSDT, &header); + printk(KERN_INFO "ACPI DSDT OEM Rev 0x%x\n", + header->oem_revision); + } + if (SN_ACPI_BASE_SUPPORT()) sn_io_acpi_init(); else sn_io_init(); diff --git a/arch/ia64/sn/kernel/iomv.c b/arch/ia64/sn/kernel/iomv.c index b1a47da118b1..ab7e2fd40798 100644 --- a/arch/ia64/sn/kernel/iomv.c +++ b/arch/ia64/sn/kernel/iomv.c @@ -16,6 +16,7 @@ #include #include #include +#include #define IS_LEGACY_VGA_IOPORT(p) \ (((p) >= 0x3b0 && (p) <= 0x3bb) || ((p) >= 0x3c0 && (p) <= 0x3df)) @@ -29,8 +30,6 @@ * SN i/o address. Used by sn_in*() and sn_out*(). */ -extern int sn_acpi_base_support(); - void *sn_io_addr(unsigned long port) { if (!IS_RUNNING_ON_SIMULATOR()) { @@ -39,7 +38,7 @@ void *sn_io_addr(unsigned long port) /* On sn2, legacy I/O ports don't point at anything */ if (port < (64 * 1024)) return NULL; - if (sn_acpi_base_support()) + if (SN_ACPI_BASE_SUPPORT()) return (__ia64_mk_io_addr(port)); else return ((void *)(port | __IA64_UNCACHED_OFFSET)); -- cgit v1.2.3 From 6f09a9250a5d76c0765cd51a33e0a042e9761cfc Mon Sep 17 00:00:00 2001 From: John Keller Date: Tue, 30 Jan 2007 01:17:37 -0500 Subject: Altix: ACPI SSDT PCI device support Add SN platform support for running with an ACPI capable PROM that defines PCI devices in SSDT tables. There is a SSDT table for every occupied slot on a root bus, containing info for every PPB and/or device on the bus. The SSDTs will be dynamically loaded/unloaded at hotplug enable/disable. Platform specific information that is currently passed via a SAL call, will now be passed via the Vendor resource in the ACPI Device object(s) defined in each SSDT. Signed-off-by: John Keller Cc: Greg KH Cc: "Luck, Tony" Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- arch/ia64/sn/kernel/io_acpi_init.c | 314 +++++++++++++++++++++++++++++--- arch/ia64/sn/kernel/io_common.c | 91 ++------- arch/ia64/sn/kernel/io_init.c | 54 +++++- arch/ia64/sn/pci/pcibr/pcibr_provider.c | 6 +- 4 files changed, 362 insertions(+), 103 deletions(-) (limited to 'arch') diff --git a/arch/ia64/sn/kernel/io_acpi_init.c b/arch/ia64/sn/kernel/io_acpi_init.c index cb96b4ea7df6..8c331ca6e5c9 100644 --- a/arch/ia64/sn/kernel/io_acpi_init.c +++ b/arch/ia64/sn/kernel/io_acpi_init.c @@ -13,6 +13,7 @@ #include #include "xtalk/hubdev.h" #include +#include /* @@ -31,6 +32,12 @@ struct acpi_vendor_uuid sn_uuid = { 0xa2, 0x7c, 0x08, 0x00, 0x69, 0x13, 0xea, 0x51 }, }; +struct sn_pcidev_match { + u8 bus; + unsigned int devfn; + acpi_handle handle; +}; + /* * Perform the early IO init in PROM. */ @@ -119,9 +126,11 @@ sn_get_bussoft_ptr(struct pci_bus *bus) status = acpi_get_vendor_resource(handle, METHOD_NAME__CRS, &sn_uuid, &buffer); if (ACPI_FAILURE(status)) { - printk(KERN_ERR "get_acpi_pcibus_ptr: " - "get_acpi_bussoft_info() failed: %d\n", - status); + printk(KERN_ERR "%s: " + "acpi_get_vendor_resource() failed (0x%x) for: ", + __FUNCTION__, status); + acpi_ns_print_node_pathname(handle, NULL); + printk("\n"); return NULL; } resource = buffer.pointer; @@ -130,8 +139,8 @@ sn_get_bussoft_ptr(struct pci_bus *bus) if ((vendor->byte_length - sizeof(struct acpi_vendor_uuid)) != sizeof(struct pcibus_bussoft *)) { printk(KERN_ERR - "get_acpi_bussoft_ptr: Invalid vendor data " - "length %d\n", vendor->byte_length); + "%s: Invalid vendor data length %d\n", + __FUNCTION__, vendor->byte_length); kfree(buffer.pointer); return NULL; } @@ -143,34 +152,254 @@ sn_get_bussoft_ptr(struct pci_bus *bus) } /* - * sn_acpi_bus_fixup + * sn_extract_device_info - Extract the pcidev_info and the sn_irq_info + * pointers from the vendor resource using the + * provided acpi handle, and copy the structures + * into the argument buffers. */ -void -sn_acpi_bus_fixup(struct pci_bus *bus) +static int +sn_extract_device_info(acpi_handle handle, struct pcidev_info **pcidev_info, + struct sn_irq_info **sn_irq_info) { - struct pci_dev *pci_dev = NULL; - struct pcibus_bussoft *prom_bussoft_ptr; - extern void sn_common_bus_fixup(struct pci_bus *, - struct pcibus_bussoft *); + u64 addr; + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + struct sn_irq_info *irq_info, *irq_info_prom; + struct pcidev_info *pcidev_ptr, *pcidev_prom_ptr; + struct acpi_resource *resource; + int ret = 0; + acpi_status status; + struct acpi_resource_vendor_typed *vendor; - if (!bus->parent) { /* If root bus */ - prom_bussoft_ptr = sn_get_bussoft_ptr(bus); - if (prom_bussoft_ptr == NULL) { + /* + * The pointer to this device's pcidev_info structure in + * the PROM, is in the vendor resource. + */ + status = acpi_get_vendor_resource(handle, METHOD_NAME__CRS, + &sn_uuid, &buffer); + if (ACPI_FAILURE(status)) { + printk(KERN_ERR + "%s: acpi_get_vendor_resource() failed (0x%x) for: ", + __FUNCTION__, status); + acpi_ns_print_node_pathname(handle, NULL); + printk("\n"); + return 1; + } + + resource = buffer.pointer; + vendor = &resource->data.vendor_typed; + if ((vendor->byte_length - sizeof(struct acpi_vendor_uuid)) != + sizeof(struct pci_devdev_info *)) { + printk(KERN_ERR + "%s: Invalid vendor data length: %d for: ", + __FUNCTION__, vendor->byte_length); + acpi_ns_print_node_pathname(handle, NULL); + printk("\n"); + ret = 1; + goto exit; + } + + pcidev_ptr = kzalloc(sizeof(struct pcidev_info), GFP_KERNEL); + if (!pcidev_ptr) + panic("%s: Unable to alloc memory for pcidev_info", __FUNCTION__); + + memcpy(&addr, vendor->byte_data, sizeof(struct pcidev_info *)); + pcidev_prom_ptr = __va(addr); + memcpy(pcidev_ptr, pcidev_prom_ptr, sizeof(struct pcidev_info)); + + /* Get the IRQ info */ + irq_info = kzalloc(sizeof(struct sn_irq_info), GFP_KERNEL); + if (!irq_info) + panic("%s: Unable to alloc memory for sn_irq_info", __FUNCTION__); + + if (pcidev_ptr->pdi_sn_irq_info) { + irq_info_prom = __va(pcidev_ptr->pdi_sn_irq_info); + memcpy(irq_info, irq_info_prom, sizeof(struct sn_irq_info)); + } + + *pcidev_info = pcidev_ptr; + *sn_irq_info = irq_info; + +exit: + kfree(buffer.pointer); + return ret; +} + +static unsigned int +get_host_devfn(acpi_handle device_handle, acpi_handle rootbus_handle) +{ + unsigned long adr; + acpi_handle child; + unsigned int devfn; + int function; + acpi_handle parent; + int slot; + acpi_status status; + + /* + * Do an upward search to find the root bus device, and + * obtain the host devfn from the previous child device. + */ + child = device_handle; + while (child) { + status = acpi_get_parent(child, &parent); + if (ACPI_FAILURE(status)) { + printk(KERN_ERR "%s: acpi_get_parent() failed " + "(0x%x) for: ", __FUNCTION__, status); + acpi_ns_print_node_pathname(child, NULL); + printk("\n"); + panic("%s: Unable to find host devfn\n", __FUNCTION__); + } + if (parent == rootbus_handle) + break; + child = parent; + } + if (!child) { + printk(KERN_ERR "%s: Unable to find root bus for: ", + __FUNCTION__); + acpi_ns_print_node_pathname(device_handle, NULL); + printk("\n"); + BUG(); + } + + status = acpi_evaluate_integer(child, METHOD_NAME__ADR, NULL, &adr); + if (ACPI_FAILURE(status)) { + printk(KERN_ERR "%s: Unable to get _ADR (0x%x) for: ", + __FUNCTION__, status); + acpi_ns_print_node_pathname(child, NULL); + printk("\n"); + panic("%s: Unable to find host devfn\n", __FUNCTION__); + } + + slot = (adr >> 16) & 0xffff; + function = adr & 0xffff; + devfn = PCI_DEVFN(slot, function); + return devfn; +} + +/* + * find_matching_device - Callback routine to find the ACPI device + * that matches up with our pci_dev device. + * Matching is done on bus number and devfn. + * To find the bus number for a particular + * ACPI device, we must look at the _BBN method + * of its parent. + */ +static acpi_status +find_matching_device(acpi_handle handle, u32 lvl, void *context, void **rv) +{ + unsigned long bbn = -1; + unsigned long adr; + acpi_handle parent = NULL; + acpi_status status; + unsigned int devfn; + int function; + int slot; + struct sn_pcidev_match *info = context; + + status = acpi_evaluate_integer(handle, METHOD_NAME__ADR, NULL, + &adr); + if (ACPI_SUCCESS(status)) { + status = acpi_get_parent(handle, &parent); + if (ACPI_FAILURE(status)) { printk(KERN_ERR - "sn_pci_fixup_bus: 0x%04x:0x%02x Unable to " - "obtain prom_bussoft_ptr\n", - pci_domain_nr(bus), bus->number); - return; + "%s: acpi_get_parent() failed (0x%x) for: ", + __FUNCTION__, status); + acpi_ns_print_node_pathname(handle, NULL); + printk("\n"); + return AE_OK; + } + status = acpi_evaluate_integer(parent, METHOD_NAME__BBN, + NULL, &bbn); + if (ACPI_FAILURE(status)) { + printk(KERN_ERR + "%s: Failed to find _BBN in parent of: ", + __FUNCTION__); + acpi_ns_print_node_pathname(handle, NULL); + printk("\n"); + return AE_OK; + } + + slot = (adr >> 16) & 0xffff; + function = adr & 0xffff; + devfn = PCI_DEVFN(slot, function); + if ((info->devfn == devfn) && (info->bus == bbn)) { + /* We have a match! */ + info->handle = handle; + return 1; } - sn_common_bus_fixup(bus, prom_bussoft_ptr); } - list_for_each_entry(pci_dev, &bus->devices, bus_list) { - sn_pci_fixup_slot(pci_dev); + return AE_OK; +} + +/* + * sn_acpi_get_pcidev_info - Search ACPI namespace for the acpi + * device matching the specified pci_dev, + * and return the pcidev info and irq info. + */ +int +sn_acpi_get_pcidev_info(struct pci_dev *dev, struct pcidev_info **pcidev_info, + struct sn_irq_info **sn_irq_info) +{ + unsigned int host_devfn; + struct sn_pcidev_match pcidev_match; + acpi_handle rootbus_handle; + unsigned long segment; + acpi_status status; + + rootbus_handle = PCI_CONTROLLER(dev)->acpi_handle; + status = acpi_evaluate_integer(rootbus_handle, METHOD_NAME__SEG, NULL, + &segment); + if (ACPI_SUCCESS(status)) { + if (segment != pci_domain_nr(dev)) { + printk(KERN_ERR + "%s: Segment number mismatch, 0x%lx vs 0x%x for: ", + __FUNCTION__, segment, pci_domain_nr(dev)); + acpi_ns_print_node_pathname(rootbus_handle, NULL); + printk("\n"); + return 1; + } + } else { + printk(KERN_ERR "%s: Unable to get __SEG from: ", + __FUNCTION__); + acpi_ns_print_node_pathname(rootbus_handle, NULL); + printk("\n"); + return 1; + } + + /* + * We want to search all devices in this segment/domain + * of the ACPI namespace for the matching ACPI device, + * which holds the pcidev_info pointer in its vendor resource. + */ + pcidev_match.bus = dev->bus->number; + pcidev_match.devfn = dev->devfn; + pcidev_match.handle = NULL; + + acpi_walk_namespace(ACPI_TYPE_DEVICE, rootbus_handle, ACPI_UINT32_MAX, + find_matching_device, &pcidev_match, NULL); + + if (!pcidev_match.handle) { + printk(KERN_ERR + "%s: Could not find matching ACPI device for %s.\n", + __FUNCTION__, pci_name(dev)); + return 1; } + + if (sn_extract_device_info(pcidev_match.handle, pcidev_info, sn_irq_info)) + return 1; + + /* Build up the pcidev_info.pdi_slot_host_handle */ + host_devfn = get_host_devfn(pcidev_match.handle, rootbus_handle); + (*pcidev_info)->pdi_slot_host_handle = + ((unsigned long) pci_domain_nr(dev) << 40) | + /* bus == 0 */ + host_devfn; + return 0; } /* - * sn_acpi_slot_fixup - Perform any SN specific slot fixup. + * sn_acpi_slot_fixup - Obtain the pcidev_info and sn_irq_info. + * Perform any SN specific slot fixup. * At present there does not appear to be * any generic way to handle a ROM image * that has been shadowed by the PROM, so @@ -179,11 +408,18 @@ sn_acpi_bus_fixup(struct pci_bus *bus) */ void -sn_acpi_slot_fixup(struct pci_dev *dev, struct pcidev_info *pcidev_info) +sn_acpi_slot_fixup(struct pci_dev *dev) { void __iomem *addr; + struct pcidev_info *pcidev_info = NULL; + struct sn_irq_info *sn_irq_info = NULL; size_t size; + if (sn_acpi_get_pcidev_info(dev, &pcidev_info, &sn_irq_info)) { + panic("%s: Failure obtaining pcidev_info for %s\n", + __FUNCTION__, pci_name(dev)); + } + if (pcidev_info->pdi_pio_mapped_addr[PCI_ROM_RESOURCE]) { /* * A valid ROM image exists and has been shadowed by the @@ -200,8 +436,11 @@ sn_acpi_slot_fixup(struct pci_dev *dev, struct pcidev_info *pcidev_info) (unsigned long) addr + size; dev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_BIOS_COPY; } + sn_pci_fixup_slot(dev, pcidev_info, sn_irq_info); } +EXPORT_SYMBOL(sn_acpi_slot_fixup); + static struct acpi_driver acpi_sn_hubdev_driver = { .name = "SGI HUBDEV Driver", .ids = "SGIHUB,SGITIO", @@ -211,6 +450,33 @@ static struct acpi_driver acpi_sn_hubdev_driver = { }; +/* + * sn_acpi_bus_fixup - Perform SN specific setup of software structs + * (pcibus_bussoft, pcidev_info) and hardware + * registers, for the specified bus and devices under it. + */ +void +sn_acpi_bus_fixup(struct pci_bus *bus) +{ + struct pci_dev *pci_dev = NULL; + struct pcibus_bussoft *prom_bussoft_ptr; + + if (!bus->parent) { /* If root bus */ + prom_bussoft_ptr = sn_get_bussoft_ptr(bus); + if (prom_bussoft_ptr == NULL) { + printk(KERN_ERR + "%s: 0x%04x:0x%02x Unable to " + "obtain prom_bussoft_ptr\n", + __FUNCTION__, pci_domain_nr(bus), bus->number); + return; + } + sn_common_bus_fixup(bus, prom_bussoft_ptr); + } + list_for_each_entry(pci_dev, &bus->devices, bus_list) { + sn_acpi_slot_fixup(pci_dev); + } +} + /* * sn_io_acpi_init - PROM has ACPI support for IO, defining at a minimum the * nodes and root buses in the DSDT. As a result, bus scanning diff --git a/arch/ia64/sn/kernel/io_common.c b/arch/ia64/sn/kernel/io_common.c index 75f0379958f9..d48bcd83253c 100644 --- a/arch/ia64/sn/kernel/io_common.c +++ b/arch/ia64/sn/kernel/io_common.c @@ -26,14 +26,10 @@ #include #include #include +#include "acpi/acglobal.h" extern void sn_init_cpei_timer(void); extern void register_sn_procfs(void); -extern void sn_acpi_bus_fixup(struct pci_bus *); -extern void sn_bus_fixup(struct pci_bus *); -extern void sn_acpi_slot_fixup(struct pci_dev *, struct pcidev_info *); -extern void sn_more_slot_fixup(struct pci_dev *, struct pcidev_info *); -extern void sn_legacy_pci_window_fixup(struct pci_controller *, u64, u64); extern void sn_io_acpi_init(void); extern void sn_io_init(void); @@ -48,16 +44,10 @@ struct sysdata_el { int sn_ioif_inited; /* SN I/O infrastructure initialized? */ -struct sn_pcibus_provider *sn_pci_provider[PCIIO_ASIC_MAX_TYPES]; /* indexed by asic type */ +int sn_acpi_rev; /* SN ACPI revision */ +EXPORT_SYMBOL_GPL(sn_acpi_rev); -int sn_acpi_base_support(void) -{ - struct acpi_table_header *header; - (void)acpi_get_table_by_index(ACPI_TABLE_INDEX_DSDT, &header); - if (header && header->oem_revision >= 0x20101) - return 1; - return 0; -} +struct sn_pcibus_provider *sn_pci_provider[PCIIO_ASIC_MAX_TYPES]; /* indexed by asic type */ /* * Hooks and struct for unsupported pci providers @@ -107,25 +97,6 @@ sal_get_device_dmaflush_list(u64 nasid, u64 widget_num, u64 device_num, return ret_stuff.status; } -/* - * Retrieve the pci device information given the bus and device|function number. - */ -static inline u64 -sal_get_pcidev_info(u64 segment, u64 bus_number, u64 devfn, u64 pci_dev, - u64 sn_irq_info) -{ - struct ia64_sal_retval ret_stuff; - ret_stuff.status = 0; - ret_stuff.v0 = 0; - - SAL_CALL_NOLOCK(ret_stuff, - (u64) SN_SAL_IOIF_GET_PCIDEV_INFO, - (u64) segment, (u64) bus_number, (u64) devfn, - (u64) pci_dev, - sn_irq_info, 0, 0); - return ret_stuff.v0; -} - /* * sn_pcidev_info_get() - Retrieve the pcidev_info struct for the specified * device. @@ -258,50 +229,25 @@ void sn_pci_unfixup_slot(struct pci_dev *dev) } /* - * sn_pci_fixup_slot() - This routine sets up a slot's resources consistent - * with the Linux PCI abstraction layer. Resources - * acquired from our PCI provider include PIO maps - * to BAR space and interrupt objects. + * sn_pci_fixup_slot() */ -void sn_pci_fixup_slot(struct pci_dev *dev) +void sn_pci_fixup_slot(struct pci_dev *dev, struct pcidev_info *pcidev_info, + struct sn_irq_info *sn_irq_info) { int segment = pci_domain_nr(dev->bus); - int status = 0; struct pcibus_bussoft *bs; - struct pci_bus *host_pci_bus; - struct pci_dev *host_pci_dev; - struct pcidev_info *pcidev_info; - struct sn_irq_info *sn_irq_info; - unsigned int bus_no, devfn; + struct pci_bus *host_pci_bus; + struct pci_dev *host_pci_dev; + unsigned int bus_no, devfn; pci_dev_get(dev); /* for the sysdata pointer */ - pcidev_info = kzalloc(sizeof(struct pcidev_info), GFP_KERNEL); - if (!pcidev_info) - BUG(); /* Cannot afford to run out of memory */ - - sn_irq_info = kzalloc(sizeof(struct sn_irq_info), GFP_KERNEL); - if (!sn_irq_info) - BUG(); /* Cannot afford to run out of memory */ - - /* Call to retrieve pci device information needed by kernel. */ - status = sal_get_pcidev_info((u64) segment, (u64) dev->bus->number, - dev->devfn, - (u64) __pa(pcidev_info), - (u64) __pa(sn_irq_info)); - if (status) - BUG(); /* Cannot get platform pci device information */ /* Add pcidev_info to list in pci_controller.platform_data */ list_add_tail(&pcidev_info->pdi_list, &(SN_PLATFORM_DATA(dev->bus)->pcidev_info)); - - if (SN_ACPI_BASE_SUPPORT()) - sn_acpi_slot_fixup(dev, pcidev_info); - else - sn_more_slot_fixup(dev, pcidev_info); /* * Using the PROMs values for the PCI host bus, get the Linux - * PCI host_pci_dev struct and set up host bus linkages + * PCI host_pci_dev struct and set up host bus linkages */ bus_no = (pcidev_info->pdi_slot_host_handle >> 32) & 0xff; @@ -498,11 +444,6 @@ void sn_generate_path(struct pci_bus *pci_bus, char *address) sprintf(address, "%s^%d", address, geo_slot(geoid)); } -/* - * sn_pci_fixup_bus() - Perform SN specific setup of software structs - * (pcibus_bussoft, pcidev_info) and hardware - * registers, for the specified bus and devices under it. - */ void __devinit sn_pci_fixup_bus(struct pci_bus *bus) { @@ -528,6 +469,15 @@ sn_io_early_init(void) if (!ia64_platform_is("sn2") || IS_RUNNING_ON_FAKE_PROM()) return 0; + /* we set the acpi revision to that of the DSDT table OEM rev. */ + { + struct acpi_table_header *header = NULL; + + acpi_get_table_by_index(ACPI_TABLE_INDEX_DSDT, &header); + BUG_ON(header == NULL); + sn_acpi_rev = header->oem_revision; + } + /* * prime sn_pci_provider[]. Individial provider init routines will * override their respective default entries. @@ -618,7 +568,6 @@ sn_io_late_init(void) fs_initcall(sn_io_late_init); -EXPORT_SYMBOL(sn_pci_fixup_slot); EXPORT_SYMBOL(sn_pci_unfixup_slot); EXPORT_SYMBOL(sn_bus_store_sysdata); EXPORT_SYMBOL(sn_bus_free_sysdata); diff --git a/arch/ia64/sn/kernel/io_init.c b/arch/ia64/sn/kernel/io_init.c index 9ad843e0383b..600be3ebae05 100644 --- a/arch/ia64/sn/kernel/io_init.c +++ b/arch/ia64/sn/kernel/io_init.c @@ -56,6 +56,25 @@ static inline u64 sal_get_pcibus_info(u64 segment, u64 busnum, u64 address) return ret_stuff.v0; } +/* + * Retrieve the pci device information given the bus and device|function number. + */ +static inline u64 +sal_get_pcidev_info(u64 segment, u64 bus_number, u64 devfn, u64 pci_dev, + u64 sn_irq_info) +{ + struct ia64_sal_retval ret_stuff; + ret_stuff.status = 0; + ret_stuff.v0 = 0; + + SAL_CALL_NOLOCK(ret_stuff, + (u64) SN_SAL_IOIF_GET_PCIDEV_INFO, + (u64) segment, (u64) bus_number, (u64) devfn, + (u64) pci_dev, + sn_irq_info, 0, 0); + return ret_stuff.v0; +} + /* * sn_fixup_ionodes() - This routine initializes the HUB data structure for @@ -172,18 +191,40 @@ sn_pci_window_fixup(struct pci_dev *dev, unsigned int count, } /* - * sn_more_slot_fixup() - We are not running with an ACPI capable PROM, + * sn_io_slot_fixup() - We are not running with an ACPI capable PROM, * and need to convert the pci_dev->resource * 'start' and 'end' addresses to mapped addresses, * and setup the pci_controller->window array entries. */ void -sn_more_slot_fixup(struct pci_dev *dev, struct pcidev_info *pcidev_info) +sn_io_slot_fixup(struct pci_dev *dev) { unsigned int count = 0; int idx; s64 pci_addrs[PCI_ROM_RESOURCE + 1]; unsigned long addr, end, size, start; + struct pcidev_info *pcidev_info; + struct sn_irq_info *sn_irq_info; + int status; + + pcidev_info = kzalloc(sizeof(struct pcidev_info), GFP_KERNEL); + if (!pcidev_info) + panic("%s: Unable to alloc memory for pcidev_info", __FUNCTION__); + + sn_irq_info = kzalloc(sizeof(struct sn_irq_info), GFP_KERNEL); + if (!sn_irq_info) + panic("%s: Unable to alloc memory for sn_irq_info", __FUNCTION__); + + /* Call to retrieve pci device information needed by kernel. */ + status = sal_get_pcidev_info((u64) pci_domain_nr(dev), + (u64) dev->bus->number, + dev->devfn, + (u64) __pa(pcidev_info), + (u64) __pa(sn_irq_info)); + + if (status) + BUG(); /* Cannot get platform pci device information */ + /* Copy over PIO Mapped Addresses */ for (idx = 0; idx <= PCI_ROM_RESOURCE; idx++) { @@ -219,8 +260,12 @@ sn_more_slot_fixup(struct pci_dev *dev, struct pcidev_info *pcidev_info) */ if (count > 0) sn_pci_window_fixup(dev, count, pci_addrs); + + sn_pci_fixup_slot(dev, pcidev_info, sn_irq_info); } +EXPORT_SYMBOL(sn_io_slot_fixup); + /* * sn_pci_controller_fixup() - This routine sets up a bus's resources * consistent with the Linux PCI abstraction layer. @@ -272,9 +317,6 @@ sn_bus_fixup(struct pci_bus *bus) { struct pci_dev *pci_dev = NULL; struct pcibus_bussoft *prom_bussoft_ptr; - extern void sn_common_bus_fixup(struct pci_bus *, - struct pcibus_bussoft *); - if (!bus->parent) { /* If root bus */ prom_bussoft_ptr = PCI_CONTROLLER(bus)->platform_data; @@ -291,7 +333,7 @@ sn_bus_fixup(struct pci_bus *bus) prom_bussoft_ptr->bs_legacy_mem); } list_for_each_entry(pci_dev, &bus->devices, bus_list) { - sn_pci_fixup_slot(pci_dev); + sn_io_slot_fixup(pci_dev); } } diff --git a/arch/ia64/sn/pci/pcibr/pcibr_provider.c b/arch/ia64/sn/pci/pcibr/pcibr_provider.c index 6846dc9b432d..04a8256017eb 100644 --- a/arch/ia64/sn/pci/pcibr/pcibr_provider.c +++ b/arch/ia64/sn/pci/pcibr/pcibr_provider.c @@ -20,7 +20,8 @@ #include "xtalk/hubdev.h" int -sal_pcibr_slot_enable(struct pcibus_info *soft, int device, void *resp) +sal_pcibr_slot_enable(struct pcibus_info *soft, int device, void *resp, + char **ssdt) { struct ia64_sal_retval ret_stuff; u64 busnum; @@ -32,7 +33,8 @@ sal_pcibr_slot_enable(struct pcibus_info *soft, int device, void *resp) segment = soft->pbi_buscommon.bs_persist_segment; busnum = soft->pbi_buscommon.bs_persist_busnum; SAL_CALL_NOLOCK(ret_stuff, (u64) SN_SAL_IOIF_SLOT_ENABLE, segment, - busnum, (u64) device, (u64) resp, 0, 0, 0); + busnum, (u64) device, (u64) resp, (u64)ia64_tpa(ssdt), + 0, 0); return (int)ret_stuff.v0; } -- cgit v1.2.3 From 14796722839ee50ed2a2c7a6a135e7d0888aaada Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=B3=20Bilski?= Date: Fri, 19 Jan 2007 22:28:22 +0100 Subject: [CPUFREQ] Longhaul - Remove "ignore_latency" option MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There is no need to have this option in Longhaul anymore. It was for laptop with CLE266 chipset in times, when only ACPI C3 was used to switch frequency. Now we have native support not only for CLE266, but CN400 too. Would be good to have support for PN266, but I can't find datasheet for it. Looks like BIOS for CPU's faster then 1GHz don't support ACPI C2 nor C3. Signed-off-by: Rafa³ Bilski Signed-off-by: Dave Jones --- arch/i386/kernel/cpu/cpufreq/longhaul.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c index e940e00b96c9..b679aaf0c6b4 100644 --- a/arch/i386/kernel/cpu/cpufreq/longhaul.c +++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c @@ -76,7 +76,6 @@ static u8 longhaul_flags; /* Module parameters */ static int scale_voltage; -static int ignore_latency; #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "longhaul", msg) @@ -680,8 +679,7 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) /* Check ACPI support for C3 state */ if ((pr != NULL) && (longhaul_version == TYPE_POWERSAVER)) { cx = &pr->power.states[ACPI_STATE_C3]; - if (cx->address > 0 && - (cx->latency <= 1000 || ignore_latency != 0) ) { + if (cx->address > 0 && cx->latency <= 1000) { longhaul_flags |= USE_ACPI_C3; goto print_support_type; } @@ -800,8 +798,6 @@ static void __exit longhaul_exit(void) module_param (scale_voltage, int, 0644); MODULE_PARM_DESC(scale_voltage, "Scale voltage of processor"); -module_param(ignore_latency, int, 0644); -MODULE_PARM_DESC(ignore_latency, "Skip ACPI C3 latency test"); MODULE_AUTHOR ("Dave Jones "); MODULE_DESCRIPTION ("Longhaul driver for VIA Cyrix processors."); -- cgit v1.2.3 From 58389a86df48ff927846df9537ea34d9961b5c44 Mon Sep 17 00:00:00 2001 From: Joachim Deguara Date: Tue, 30 Jan 2007 16:53:54 +0100 Subject: [CPUFREQ] fix cpuinfo_cur_freq for CPU_HW_PSTATE This fixes the cpuinfo_cur_freq value by using the correct find_khz_freq_from_fiddid() when the CPU uses hardware p-states. Signed-off-by: Joachim Deguara Acked-by: Mark Langsdorf Signed-off-by: Dave Jones --- arch/i386/kernel/cpu/cpufreq/powernow-k8.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c index 2d6491672559..fe3b67005ebb 100644 --- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c @@ -1289,7 +1289,11 @@ static unsigned int powernowk8_get (unsigned int cpu) if (query_current_values_with_pending_wait(data)) goto out; - khz = find_khz_freq_from_fid(data->currfid); + if (cpu_family == CPU_HW_PSTATE) + khz = find_khz_freq_from_fiddid(data->currfid, data->currdid); + else + khz = find_khz_freq_from_fid(data->currfid); + out: set_cpus_allowed(current, oldmask); -- cgit v1.2.3 From 980342a7eb6b4ebcc5feffe6287ad5cda5a68a4b Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=B3=20Bilski?= Date: Wed, 31 Jan 2007 23:42:47 +0100 Subject: [CPUFREQ] Longhaul - Introduce Nehemiah C MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Looks like some time ago I introduced a bug to Longhaul. I had report that 9x133Mhz CPU is seen as 5x133MHz. So I changed multipliers table. That was a mistake. According to documentation table was correct. So only way to avoid 5 or 9 dilema is not use MaxMHzBR for PowerSaver 1.0. One code that works on all processors. To do it I need also separate flag for Nehemiah C (min = x4.0) and Nehemiah (min = x5.0). Signed-off-by: Rafa³ Bilski Signed-off-by: Dave Jones --- arch/i386/kernel/cpu/cpufreq/longhaul.c | 73 +++++++++++++-------------------- 1 file changed, 28 insertions(+), 45 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c index b679aaf0c6b4..849a6dfdfea8 100644 --- a/arch/i386/kernel/cpu/cpufreq/longhaul.c +++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c @@ -51,6 +51,7 @@ #define CPU_EZRA 3 #define CPU_EZRA_T 4 #define CPU_NEHEMIAH 5 +#define CPU_NEHEMIAH_C 6 /* Flags */ #define USE_ACPI_C3 (1 << 1) @@ -349,67 +350,47 @@ static int guess_fsb(int mult) static int __init longhaul_get_ranges(void) { - unsigned long invalue; - unsigned int ezra_t_multipliers[32]= { - 90, 30, 40, 100, 55, 35, 45, 95, - 50, 70, 80, 60, 120, 75, 85, 65, - -1, 110, 120, -1, 135, 115, 125, 105, - 130, 150, 160, 140, -1, 155, -1, 145 }; unsigned int j, k = 0; - union msr_longhaul longhaul; - int mult = 0; + int mult; + /* Get current frequency */ + mult = longhaul_get_cpu_mult(); + if (mult == -1) { + printk(KERN_INFO PFX "Invalid (reserved) multiplier!\n"); + return -EINVAL; + } + fsb = guess_fsb(mult); + if (fsb == 0) { + printk(KERN_INFO PFX "Invalid (reserved) FSB!\n"); + return -EINVAL; + } + /* Get max multiplier - as we always did. + * Longhaul MSR is usefull only when voltage scaling is enabled. + * C3 is booting at max anyway. */ + maxmult = mult; + /* Get min multiplier */ switch (longhaul_version) { case TYPE_LONGHAUL_V1: case TYPE_LONGHAUL_V2: - /* Ugh, Longhaul v1 didn't have the min/max MSRs. - Assume min=3.0x & max = whatever we booted at. */ minmult = 30; - maxmult = mult = longhaul_get_cpu_mult(); break; case TYPE_POWERSAVER: /* Ezra-T */ - if (cpu_model==CPU_EZRA_T) { + if (cpu_model == CPU_EZRA_T) minmult = 30; - rdmsrl (MSR_VIA_LONGHAUL, longhaul.val); - invalue = longhaul.bits.MaxMHzBR; - if (longhaul.bits.MaxMHzBR4) - invalue += 16; - maxmult = mult = ezra_t_multipliers[invalue]; - break; - } - /* Nehemiah */ - if (cpu_model==CPU_NEHEMIAH) { - rdmsrl (MSR_VIA_LONGHAUL, longhaul.val); - - /* - * TODO: This code works, but raises a lot of questions. - * - Some Nehemiah's seem to have broken Min/MaxMHzBR's. - * We get around this by using a hardcoded multiplier of 4.0x - * for the minimimum speed, and the speed we booted up at for the max. - * This is done in longhaul_get_cpu_mult() by reading the EBLCR register. - * - According to some VIA documentation EBLCR is only - * in pre-Nehemiah C3s. How this still works is a mystery. - * We're possibly using something undocumented and unsupported, - * But it works, so we don't grumble. - */ - minmult=40; - maxmult = mult = longhaul_get_cpu_mult(); - break; - } + else if (cpu_model == CPU_NEHEMIAH) + minmult = 50; + /* Nehemiah C */ + else if (cpu_model == CPU_NEHEMIAH_C) + minmult = 40; + break; } - fsb = guess_fsb(mult); dprintk ("MinMult:%d.%dx MaxMult:%d.%dx\n", minmult/10, minmult%10, maxmult/10, maxmult%10); - if (fsb == 0) { - printk (KERN_INFO PFX "Invalid (reserved) FSB!\n"); - return -EINVAL; - } - highest_speed = calc_speed(maxmult); lowest_speed = calc_speed(minmult); dprintk ("FSB:%dMHz Lowest speed: %s Highest speed:%s\n", fsb, @@ -634,21 +615,23 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) break; case 9: - cpu_model = CPU_NEHEMIAH; longhaul_version = TYPE_POWERSAVER; numscales=32; switch (c->x86_mask) { case 0 ... 1: + cpu_model = CPU_NEHEMIAH; cpuname = "C3 'Nehemiah A' [C5N]"; memcpy (clock_ratio, nehemiah_a_clock_ratio, sizeof(nehemiah_a_clock_ratio)); memcpy (eblcr_table, nehemiah_a_eblcr, sizeof(nehemiah_a_eblcr)); break; case 2 ... 4: + cpu_model = CPU_NEHEMIAH; cpuname = "C3 'Nehemiah B' [C5N]"; memcpy (clock_ratio, nehemiah_b_clock_ratio, sizeof(nehemiah_b_clock_ratio)); memcpy (eblcr_table, nehemiah_b_eblcr, sizeof(nehemiah_b_eblcr)); break; case 5 ... 15: + cpu_model = CPU_NEHEMIAH_C; cpuname = "C3 'Nehemiah C' [C5N]"; memcpy (clock_ratio, nehemiah_c_clock_ratio, sizeof(nehemiah_c_clock_ratio)); memcpy (eblcr_table, nehemiah_c_eblcr, sizeof(nehemiah_c_eblcr)); -- cgit v1.2.3 From 0d44b2ba287ea98547097ad2b8b0cc5f0589b8d2 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=B3=20Bilski?= Date: Wed, 31 Jan 2007 23:50:49 +0100 Subject: [CPUFREQ] Longhaul - Remove duplicate tables MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Now there is no need to depend on -1 in Nehemiah tables. After previous change code is eliminating multipliers lower then 5.0 by minmult for Nehemiah A and B. Signed-off-by: Rafa³ Bilski Signed-off-by: Dave Jones --- arch/i386/kernel/cpu/cpufreq/longhaul.c | 12 ++- arch/i386/kernel/cpu/cpufreq/longhaul.h | 153 ++------------------------------ 2 files changed, 11 insertions(+), 154 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c index 849a6dfdfea8..8ea34e951ea3 100644 --- a/arch/i386/kernel/cpu/cpufreq/longhaul.c +++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c @@ -616,25 +616,23 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) case 9: longhaul_version = TYPE_POWERSAVER; - numscales=32; + numscales = 32; + memcpy(clock_ratio, + nehemiah_clock_ratio, + sizeof(nehemiah_clock_ratio)); + memcpy(eblcr_table, nehemiah_eblcr, sizeof(nehemiah_eblcr)); switch (c->x86_mask) { case 0 ... 1: cpu_model = CPU_NEHEMIAH; cpuname = "C3 'Nehemiah A' [C5N]"; - memcpy (clock_ratio, nehemiah_a_clock_ratio, sizeof(nehemiah_a_clock_ratio)); - memcpy (eblcr_table, nehemiah_a_eblcr, sizeof(nehemiah_a_eblcr)); break; case 2 ... 4: cpu_model = CPU_NEHEMIAH; cpuname = "C3 'Nehemiah B' [C5N]"; - memcpy (clock_ratio, nehemiah_b_clock_ratio, sizeof(nehemiah_b_clock_ratio)); - memcpy (eblcr_table, nehemiah_b_eblcr, sizeof(nehemiah_b_eblcr)); break; case 5 ... 15: cpu_model = CPU_NEHEMIAH_C; cpuname = "C3 'Nehemiah C' [C5N]"; - memcpy (clock_ratio, nehemiah_c_clock_ratio, sizeof(nehemiah_c_clock_ratio)); - memcpy (eblcr_table, nehemiah_c_eblcr, sizeof(nehemiah_c_eblcr)); break; } break; diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.h b/arch/i386/kernel/cpu/cpufreq/longhaul.h index bc4682aad69b..bb0a04b1d1ab 100644 --- a/arch/i386/kernel/cpu/cpufreq/longhaul.h +++ b/arch/i386/kernel/cpu/cpufreq/longhaul.h @@ -235,84 +235,14 @@ static int __initdata ezrat_eblcr[32] = { /* * VIA C3 Nehemiah */ -static int __initdata nehemiah_a_clock_ratio[32] = { +static int __initdata nehemiah_clock_ratio[32] = { 100, /* 0000 -> 10.0x */ 160, /* 0001 -> 16.0x */ - -1, /* 0010 -> RESERVED */ - 90, /* 0011 -> 9.0x */ - 95, /* 0100 -> 9.5x */ - -1, /* 0101 -> RESERVED */ - -1, /* 0110 -> RESERVED */ - 55, /* 0111 -> 5.5x */ - 60, /* 1000 -> 6.0x */ - 70, /* 1001 -> 7.0x */ - 80, /* 1010 -> 8.0x */ - 50, /* 1011 -> 5.0x */ - 65, /* 1100 -> 6.5x */ - 75, /* 1101 -> 7.5x */ - 85, /* 1110 -> 8.5x */ - 120, /* 1111 -> 12.0x */ - 100, /* 0000 -> 10.0x */ - -1, /* 0001 -> RESERVED */ - 120, /* 0010 -> 12.0x */ - 90, /* 0011 -> 9.0x */ - 105, /* 0100 -> 10.5x */ - 115, /* 0101 -> 11.5x */ - 125, /* 0110 -> 12.5x */ - 135, /* 0111 -> 13.5x */ - 140, /* 1000 -> 14.0x */ - 150, /* 1001 -> 15.0x */ - 160, /* 1010 -> 16.0x */ - 130, /* 1011 -> 13.0x */ - 145, /* 1100 -> 14.5x */ - 155, /* 1101 -> 15.5x */ - -1, /* 1110 -> RESERVED (13.0x) */ - 120, /* 1111 -> 12.0x */ -}; - -static int __initdata nehemiah_b_clock_ratio[32] = { - 100, /* 0000 -> 10.0x */ - 160, /* 0001 -> 16.0x */ - -1, /* 0010 -> RESERVED */ - 90, /* 0011 -> 9.0x */ - 95, /* 0100 -> 9.5x */ - -1, /* 0101 -> RESERVED */ - -1, /* 0110 -> RESERVED */ - 55, /* 0111 -> 5.5x */ - 60, /* 1000 -> 6.0x */ - 70, /* 1001 -> 7.0x */ - 80, /* 1010 -> 8.0x */ - 50, /* 1011 -> 5.0x */ - 65, /* 1100 -> 6.5x */ - 75, /* 1101 -> 7.5x */ - 85, /* 1110 -> 8.5x */ - 120, /* 1111 -> 12.0x */ - 100, /* 0000 -> 10.0x */ - 110, /* 0001 -> 11.0x */ - 120, /* 0010 -> 12.0x */ - 90, /* 0011 -> 9.0x */ - 105, /* 0100 -> 10.5x */ - 115, /* 0101 -> 11.5x */ - 125, /* 0110 -> 12.5x */ - 135, /* 0111 -> 13.5x */ - 140, /* 1000 -> 14.0x */ - 150, /* 1001 -> 15.0x */ - 160, /* 1010 -> 16.0x */ - 130, /* 1011 -> 13.0x */ - 145, /* 1100 -> 14.5x */ - 155, /* 1101 -> 15.5x */ - -1, /* 1110 -> RESERVED (13.0x) */ - 120, /* 1111 -> 12.0x */ -}; - -static int __initdata nehemiah_c_clock_ratio[32] = { - 100, /* 0000 -> 10.0x */ - 160, /* 0001 -> 16.0x */ - 40, /* 0010 -> RESERVED */ + 40, /* 0010 -> 4.0x */ 90, /* 0011 -> 9.0x */ 95, /* 0100 -> 9.5x */ -1, /* 0101 -> RESERVED */ - 45, /* 0110 -> RESERVED */ + 45, /* 0110 -> 4.5x */ 55, /* 0111 -> 5.5x */ 60, /* 1000 -> 6.0x */ 70, /* 1001 -> 7.0x */ @@ -340,84 +270,14 @@ static int __initdata nehemiah_c_clock_ratio[32] = { 120, /* 1111 -> 12.0x */ }; -static int __initdata nehemiah_a_eblcr[32] = { - 50, /* 0000 -> 5.0x */ - 160, /* 0001 -> 16.0x */ - -1, /* 0010 -> RESERVED */ - 100, /* 0011 -> 10.0x */ - 55, /* 0100 -> 5.5x */ - -1, /* 0101 -> RESERVED */ - -1, /* 0110 -> RESERVED */ - 95, /* 0111 -> 9.5x */ - 90, /* 1000 -> 9.0x */ - 70, /* 1001 -> 7.0x */ - 80, /* 1010 -> 8.0x */ - 60, /* 1011 -> 6.0x */ - 120, /* 1100 -> 12.0x */ - 75, /* 1101 -> 7.5x */ - 85, /* 1110 -> 8.5x */ - 65, /* 1111 -> 6.5x */ - 90, /* 0000 -> 9.0x */ - -1, /* 0001 -> RESERVED */ - 120, /* 0010 -> 12.0x */ - 100, /* 0011 -> 10.0x */ - 135, /* 0100 -> 13.5x */ - 115, /* 0101 -> 11.5x */ - 125, /* 0110 -> 12.5x */ - 105, /* 0111 -> 10.5x */ - 130, /* 1000 -> 13.0x */ - 150, /* 1001 -> 15.0x */ - 160, /* 1010 -> 16.0x */ - 140, /* 1011 -> 14.0x */ - 120, /* 1100 -> 12.0x */ - 155, /* 1101 -> 15.5x */ - -1, /* 1110 -> RESERVED (13.0x) */ - 145 /* 1111 -> 14.5x */ - /* end of table */ -}; -static int __initdata nehemiah_b_eblcr[32] = { - 50, /* 0000 -> 5.0x */ - 160, /* 0001 -> 16.0x */ - -1, /* 0010 -> RESERVED */ - 100, /* 0011 -> 10.0x */ - 55, /* 0100 -> 5.5x */ - -1, /* 0101 -> RESERVED */ - -1, /* 0110 -> RESERVED */ - 95, /* 0111 -> 9.5x */ - 90, /* 1000 -> 9.0x */ - 70, /* 1001 -> 7.0x */ - 80, /* 1010 -> 8.0x */ - 60, /* 1011 -> 6.0x */ - 120, /* 1100 -> 12.0x */ - 75, /* 1101 -> 7.5x */ - 85, /* 1110 -> 8.5x */ - 65, /* 1111 -> 6.5x */ - 90, /* 0000 -> 9.0x */ - 110, /* 0001 -> 11.0x */ - 120, /* 0010 -> 12.0x */ - 100, /* 0011 -> 10.0x */ - 135, /* 0100 -> 13.5x */ - 115, /* 0101 -> 11.5x */ - 125, /* 0110 -> 12.5x */ - 105, /* 0111 -> 10.5x */ - 130, /* 1000 -> 13.0x */ - 150, /* 1001 -> 15.0x */ - 160, /* 1010 -> 16.0x */ - 140, /* 1011 -> 14.0x */ - 120, /* 1100 -> 12.0x */ - 155, /* 1101 -> 15.5x */ - -1, /* 1110 -> RESERVED (13.0x) */ - 145 /* 1111 -> 14.5x */ - /* end of table */ -}; -static int __initdata nehemiah_c_eblcr[32] = { +static int __initdata nehemiah_eblcr[32] = { 50, /* 0000 -> 5.0x */ 160, /* 0001 -> 16.0x */ - 40, /* 0010 -> RESERVED */ + 40, /* 0010 -> 4.0x */ 100, /* 0011 -> 10.0x */ 55, /* 0100 -> 5.5x */ -1, /* 0101 -> RESERVED */ - 45, /* 0110 -> RESERVED */ + 45, /* 0110 -> 4.5x */ 95, /* 0111 -> 9.5x */ 90, /* 1000 -> 9.0x */ 70, /* 1001 -> 7.0x */ @@ -443,7 +303,6 @@ static int __initdata nehemiah_c_eblcr[32] = { 155, /* 1101 -> 15.5x */ -1, /* 1110 -> RESERVED (13.0x) */ 145 /* 1111 -> 14.5x */ - /* end of table */ }; /* -- cgit v1.2.3 From 46ef955f5c9de0507859a3f9a92989b7425b73cc Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=B3=20Bilski?= Date: Sun, 4 Feb 2007 15:58:46 +0100 Subject: [CPUFREQ] Longhaul - Fix guess_fsb function This is bug reported by John-Marc Chandonia: > Detected 1002.292 MHz processor. > longhaul: VIA C3 'Nehemiah B' [C5N] CPU detected. Powersaver supported. > longhaul: Using throttling support. > longhaul: Invalid (reserved) FSB! FSB is correcly guessed for 999.554 MHz CPU. To fix this error: - ROUNDING should be range, not mask - at it's current value it is +7 -8, - more precise calculations inside guess_fsb - 7.5x133MHz is 1000MHz now. Signed-off-by: Rafal Bilski Signed-off-by: Dave Jones --- arch/i386/kernel/cpu/cpufreq/longhaul.c | 32 ++++++++++---------------------- 1 file changed, 10 insertions(+), 22 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c index 8ea34e951ea3..8b5ad308d656 100644 --- a/arch/i386/kernel/cpu/cpufreq/longhaul.c +++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c @@ -318,31 +318,19 @@ static void longhaul_setstate(unsigned int clock_ratio_index) #define ROUNDING 0xf -static int _guess(int guess, int mult) -{ - int target; - - target = ((mult/10)*guess); - if (mult%10 != 0) - target += (guess/2); - target += ROUNDING/2; - target &= ~ROUNDING; - return target; -} - - static int guess_fsb(int mult) { - int speed = (cpu_khz/1000); + int speed = cpu_khz / 1000; int i; - int speeds[] = { 66, 100, 133, 200 }; - - speed += ROUNDING/2; - speed &= ~ROUNDING; - - for (i=0; i<4; i++) { - if (_guess(speeds[i], mult) == speed) - return speeds[i]; + int speeds[] = { 666, 1000, 1333, 2000 }; + int f_max, f_min; + + for (i = 0; i < 4; i++) { + f_max = ((speeds[i] * mult) + 50) / 100; + f_max += (ROUNDING / 2); + f_min = f_max - ROUNDING; + if ((speed <= f_max) && (speed >= f_min)) + return speeds[i] / 10; } return 0; } -- cgit v1.2.3 From 786f46b262cb7a491f4b144e42f076d5a1ef8eef Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=B3=20Bilski?= Date: Sun, 4 Feb 2007 18:43:12 +0100 Subject: [CPUFREQ] Longhaul - Add VT8235 support I don't know why it is working and how, but it is working. On my Epia transition time is by default set to 100us. I'm changing it to 200us. After that I can change frequency from min (x4.0) to max (x7.5) without lockup. Many times. There is a paranoid check at a beginning of a patch. Probably dead code, but I don't have better ideas for CL10000 case at the moment. Only way to to detect broken chip seems to be looking in log for spurious interrupts. Signed-off-by: Rafal Bilski Signed-off-by: Dave Jones --- arch/i386/kernel/cpu/cpufreq/longhaul.c | 62 ++++++++++++++++++++++++++------- 1 file changed, 50 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c index 8b5ad308d656..98fbe28affff 100644 --- a/arch/i386/kernel/cpu/cpufreq/longhaul.c +++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c @@ -56,6 +56,7 @@ /* Flags */ #define USE_ACPI_C3 (1 << 1) #define USE_NORTHBRIDGE (1 << 2) +#define USE_VT8235 (1 << 3) static int cpu_model; static unsigned int numscales=16; @@ -544,20 +545,50 @@ static int enable_arbiter_disable(void) if (dev != NULL) { /* Enable access to port 0x22 */ pci_read_config_byte(dev, reg, &pci_cmd); - if ( !(pci_cmd & 1<<7) ) { + if (!(pci_cmd & 1<<7)) { pci_cmd |= 1<<7; pci_write_config_byte(dev, reg, pci_cmd); + pci_read_config_byte(dev, reg, &pci_cmd); + if (!(pci_cmd & 1<<7)) { + printk(KERN_ERR PFX + "Can't enable access to port 0x22.\n"); + return 0; + } } return 1; } return 0; } +static int longhaul_setup_vt8235(void) +{ + struct pci_dev *dev; + u8 pci_cmd; + + /* Find VT8235 southbridge */ + dev = pci_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, NULL); + if (dev != NULL) { + /* Set transition time to max */ + pci_read_config_byte(dev, 0xec, &pci_cmd); + pci_cmd &= ~(1 << 2); + pci_write_config_byte(dev, 0xec, pci_cmd); + pci_read_config_byte(dev, 0xe4, &pci_cmd); + pci_cmd &= ~(1 << 7); + pci_write_config_byte(dev, 0xe4, pci_cmd); + pci_read_config_byte(dev, 0xe5, &pci_cmd); + pci_cmd |= 1 << 7; + pci_write_config_byte(dev, 0xe5, pci_cmd); + return 1; + } + return 0; +} + static int __init longhaul_cpu_init(struct cpufreq_policy *policy) { struct cpuinfo_x86 *c = cpu_data; char *cpuname=NULL; int ret; + int vt8235_present; /* Check what we have on this motherboard */ switch (c->x86_model) { @@ -641,12 +672,16 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) break; }; + /* Doesn't hurt */ + vt8235_present = longhaul_setup_vt8235(); + /* Find ACPI data for processor */ - acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT, ACPI_UINT32_MAX, - &longhaul_walk_callback, NULL, (void *)&pr); + acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT, + ACPI_UINT32_MAX, &longhaul_walk_callback, + NULL, (void *)&pr); /* Check ACPI support for C3 state */ - if ((pr != NULL) && (longhaul_version == TYPE_POWERSAVER)) { + if (pr != NULL && longhaul_version == TYPE_POWERSAVER) { cx = &pr->power.states[ACPI_STATE_C3]; if (cx->address > 0 && cx->latency <= 1000) { longhaul_flags |= USE_ACPI_C3; @@ -658,8 +693,11 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) longhaul_flags |= USE_NORTHBRIDGE; goto print_support_type; } - - /* No ACPI C3 or we can't use it */ + /* Use VT8235 southbridge if present */ + if (longhaul_version == TYPE_POWERSAVER && vt8235_present) { + longhaul_flags |= USE_VT8235; + goto print_support_type; + } /* Check ACPI support for bus master arbiter disable */ if ((pr == NULL) || !(pr->flags.bm_control)) { printk(KERN_ERR PFX @@ -668,18 +706,18 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) } print_support_type: - if (!(longhaul_flags & USE_NORTHBRIDGE)) { - printk (KERN_INFO PFX "Using ACPI support.\n"); - } else { + if (longhaul_flags & USE_NORTHBRIDGE) printk (KERN_INFO PFX "Using northbridge support.\n"); - } + else if (longhaul_flags & USE_VT8235) + printk (KERN_INFO PFX "Using VT8235 support.\n"); + else + printk (KERN_INFO PFX "Using ACPI support.\n"); ret = longhaul_get_ranges(); if (ret != 0) return ret; - if ((longhaul_version==TYPE_LONGHAUL_V2 || longhaul_version==TYPE_POWERSAVER) && - (scale_voltage != 0)) + if ((longhaul_version != TYPE_LONGHAUL_V1) && (scale_voltage != 0)) longhaul_setup_voltagescaling(); policy->governor = CPUFREQ_DEFAULT_GOVERNOR; -- cgit v1.2.3 From bcb9b99d1fb6a1cbe592f131dc95450d2f18c91f Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 5 Feb 2007 15:43:42 +0900 Subject: [IA64] kexec: Fix CONFIG_SMP=n compilation Kexec support for 2.6.20 on ia64 does not build properly using a config made up by CONFIG_SMP=n and CONFIG_HOTPLUG_CPU=n: Signed-off-by: Magnus Damm Acked-by: Simon Horman Acked-by: Jay Lan Signed-off-by: Tony Luck --- arch/ia64/kernel/crash.c | 11 +++++++---- arch/ia64/kernel/machine_kexec.c | 2 ++ 2 files changed, 9 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/crash.c b/arch/ia64/kernel/crash.c index bc2f64d72244..2018e624f5e2 100644 --- a/arch/ia64/kernel/crash.c +++ b/arch/ia64/kernel/crash.c @@ -79,6 +79,7 @@ crash_save_this_cpu() final_note(buf); } +#ifdef CONFIG_SMP static int kdump_wait_cpu_freeze(void) { @@ -91,6 +92,7 @@ kdump_wait_cpu_freeze(void) } return 1; } +#endif void machine_crash_shutdown(struct pt_regs *pt) @@ -132,11 +134,12 @@ kdump_cpu_freeze(struct unw_frame_info *info, void *arg) atomic_inc(&kdump_cpu_freezed); kdump_status[cpuid] = 1; mb(); - if (cpuid == 0) { - for (;;) - cpu_relax(); - } else +#ifdef CONFIG_HOTPLUG_CPU + if (cpuid != 0) ia64_jump_to_sal(&sal_boot_rendez_state[cpuid]); +#endif + for (;;) + cpu_relax(); } static int diff --git a/arch/ia64/kernel/machine_kexec.c b/arch/ia64/kernel/machine_kexec.c index e2ccc9f660c5..714179587a7a 100644 --- a/arch/ia64/kernel/machine_kexec.c +++ b/arch/ia64/kernel/machine_kexec.c @@ -70,12 +70,14 @@ void machine_kexec_cleanup(struct kimage *image) void machine_shutdown(void) { +#ifdef CONFIG_HOTPLUG_CPU int cpu; for_each_online_cpu(cpu) { if (cpu != smp_processor_id()) cpu_down(cpu); } +#endif kexec_disable_iosapic(); } -- cgit v1.2.3 From 475c63bded322545d1e9ccc5930c8903d2c97c4c Mon Sep 17 00:00:00 2001 From: Horms Date: Mon, 5 Feb 2007 10:59:03 +0900 Subject: [IA64] Zero size /proc/vmcore on ia64 Set saved_max_pfn when discontig memory is in use. This sets up saved_max_pfn when disctontig memory is in use. This mirrors the code for contig memory. This patch does not entirely solve the problem of making vmcore work, however it does appear to be neccessary. Please consider applying. Signed-off-by: Simon Horman Signed-off-by: Tony Luck --- arch/ia64/mm/discontig.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c index 96722cb1b49d..d3edb12f3cf9 100644 --- a/arch/ia64/mm/discontig.c +++ b/arch/ia64/mm/discontig.c @@ -506,6 +506,12 @@ void __init find_memory(void) max_pfn = max_low_pfn; find_initrd(); + +#ifdef CONFIG_CRASH_DUMP + /* If we are doing a crash dump, we still need to know the real mem + * size before original memory map is reset. */ + saved_max_pfn = max_pfn; +#endif } #ifdef CONFIG_SMP -- cgit v1.2.3 From 233c2f99d6605343fa4a4c68560a4f74882b2693 Mon Sep 17 00:00:00 2001 From: Horms Date: Mon, 5 Feb 2007 11:05:29 +0900 Subject: [IA64] kexec: typo in the saved_max_pfn description in contig.c Fix a typo in the saved_max_pfn description in contig.c Signed-off-by: Simon Horman Signed-off-by: Tony Luck --- arch/ia64/mm/contig.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/ia64/mm/contig.c b/arch/ia64/mm/contig.c index 1e79551231b9..ec8657bb5bd2 100644 --- a/arch/ia64/mm/contig.c +++ b/arch/ia64/mm/contig.c @@ -177,7 +177,7 @@ find_memory (void) #ifdef CONFIG_CRASH_DUMP /* If we are doing a crash dump, we still need to know the real mem - * size before original memory map is * reset. */ + * size before original memory map is reset. */ saved_max_pfn = max_pfn; #endif } -- cgit v1.2.3 From 8a697d0a4c8e7ed51cf71a467ad59c25bfb85b44 Mon Sep 17 00:00:00 2001 From: Horms Date: Mon, 5 Feb 2007 10:17:22 +0900 Subject: [IA64] kexec: Minor enhancement to includes in crash.c linux/uaccess.h was being included, but it seems that really the following includes are needed. asm/page.h: for __va() and PAGE_SHIFT asm/uaccess.h: for copy_to_user() I guess that linux/uaccess.h pulls in both asm/page.h and asm/uaccess.h. I notices this while backporting the code to xen's linux-2.6.16.33, which does not have linux/uaccess.h. I'm posting it as I think it is a correct, though somewhat cosmetic fix. Signed-off-by: Simon Horman Signed-off-by: Tony Luck --- arch/ia64/kernel/crash_dump.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/ia64/kernel/crash_dump.c b/arch/ia64/kernel/crash_dump.c index 83b8c91c1408..da60e90eeeb1 100644 --- a/arch/ia64/kernel/crash_dump.c +++ b/arch/ia64/kernel/crash_dump.c @@ -9,7 +9,8 @@ #include #include -#include +#include +#include /** * copy_oldmem_page - copy one page from "oldmem" -- cgit v1.2.3 From abac08dbb4739f417f570e5bdf03af36150b28c3 Mon Sep 17 00:00:00 2001 From: Horms Date: Mon, 5 Feb 2007 10:16:20 +0900 Subject: [IA64] kexec: Remove inline declaration of efi_get_pal_addr() Remove the Remove inline declaration of efi_get_pal_addr() as it is declared in linux/efi.h. Signed-Off-By: Simon Horman Signed-off-by: Tony Luck --- arch/ia64/kernel/machine_kexec.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/ia64/kernel/machine_kexec.c b/arch/ia64/kernel/machine_kexec.c index 714179587a7a..655195d483df 100644 --- a/arch/ia64/kernel/machine_kexec.c +++ b/arch/ia64/kernel/machine_kexec.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include #include @@ -85,7 +86,6 @@ void machine_shutdown(void) * Do not allocate memory (or fail in any way) in machine_kexec(). * We are past the point of no return, committed to rebooting now. */ -extern void *efi_get_pal_addr(void); static void ia64_machine_kexec(struct unw_frame_info *info, void *arg) { struct kimage *image = arg; -- cgit v1.2.3 From 9473252f20e8482464415d9030b3957b5593796d Mon Sep 17 00:00:00 2001 From: Horms Date: Mon, 5 Feb 2007 10:17:38 +0900 Subject: [IA64] add newline to PAL-code warning message Signed-off-by: Simon Horman Signed-off-by: Tony Luck --- arch/ia64/kernel/efi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/ia64/kernel/efi.c b/arch/ia64/kernel/efi.c index 0b25a7d4e1e4..6c03928544c2 100644 --- a/arch/ia64/kernel/efi.c +++ b/arch/ia64/kernel/efi.c @@ -380,7 +380,7 @@ efi_get_pal_addr (void) #endif return __va(md->phys_addr); } - printk(KERN_WARNING "%s: no PAL-code memory-descriptor found", + printk(KERN_WARNING "%s: no PAL-code memory-descriptor found\n", __FUNCTION__); return NULL; } -- cgit v1.2.3 From 55dff5224abeb734b12c1661c34ccf534955bee7 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 5 Feb 2007 21:16:44 +0100 Subject: [S390] Move init_irq_proc to the other irq related functions. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/Makefile | 2 +- arch/s390/kernel/irq.c | 15 ++++++++++++--- arch/s390/kernel/profile.c | 20 -------------------- 3 files changed, 13 insertions(+), 24 deletions(-) delete mode 100644 arch/s390/kernel/profile.c (limited to 'arch') diff --git a/arch/s390/kernel/Makefile b/arch/s390/kernel/Makefile index a81881c9b297..2de811a71a39 100644 --- a/arch/s390/kernel/Makefile +++ b/arch/s390/kernel/Makefile @@ -6,7 +6,7 @@ EXTRA_AFLAGS := -traditional obj-y := bitmap.o traps.o time.o process.o reset.o \ setup.o sys_s390.o ptrace.o signal.o cpcmd.o ebcdic.o \ - semaphore.o s390_ext.o debug.o profile.o irq.o ipl.o + semaphore.o s390_ext.o debug.o irq.o ipl.o obj-y += $(if $(CONFIG_64BIT),entry64.o,entry.o) obj-y += $(if $(CONFIG_64BIT),reipl64.o,reipl.o) diff --git a/arch/s390/kernel/irq.c b/arch/s390/kernel/irq.c index 1eef50918615..8f0cbca31203 100644 --- a/arch/s390/kernel/irq.c +++ b/arch/s390/kernel/irq.c @@ -1,9 +1,9 @@ /* * arch/s390/kernel/irq.c * - * S390 version - * Copyright (C) 2004 IBM Deutschland Entwicklung GmbH, IBM Corporation + * Copyright IBM Corp. 2004,2007 * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com), + * Thomas Spatzier (tspat@de.ibm.com) * * This file contains interrupt related functions. */ @@ -14,6 +14,8 @@ #include #include #include +#include +#include /* * show_interrupts is needed by /proc/interrupts. @@ -93,5 +95,12 @@ asmlinkage void do_softirq(void) local_irq_restore(flags); } - EXPORT_SYMBOL(do_softirq); + +void init_irq_proc(void) +{ + struct proc_dir_entry *root_irq_dir; + + root_irq_dir = proc_mkdir("irq", NULL); + create_prof_cpu_mask(root_irq_dir); +} diff --git a/arch/s390/kernel/profile.c b/arch/s390/kernel/profile.c deleted file mode 100644 index b81aa1f569ca..000000000000 --- a/arch/s390/kernel/profile.c +++ /dev/null @@ -1,20 +0,0 @@ -/* - * arch/s390/kernel/profile.c - * - * Copyright (C) 2003 IBM Deutschland Entwicklung GmbH, IBM Corporation - * Author(s): Thomas Spatzier (tspat@de.ibm.com) - * - */ -#include -#include - -static struct proc_dir_entry * root_irq_dir; - -void init_irq_proc(void) -{ - /* create /proc/irq */ - root_irq_dir = proc_mkdir("irq", NULL); - - /* create /proc/irq/prof_cpu_mask */ - create_prof_cpu_mask(root_irq_dir); -} -- cgit v1.2.3 From 2b67fc46061b2171fb8fbb55d1ac717abd533569 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 5 Feb 2007 21:16:47 +0100 Subject: [S390] Get rid of a lot of sparse warnings. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/appldata/appldata_base.c | 2 +- arch/s390/appldata/appldata_mem.c | 2 +- arch/s390/appldata/appldata_net_sum.c | 2 +- arch/s390/crypto/aes_s390.c | 6 +++--- arch/s390/crypto/des_check_key.c | 1 + arch/s390/kernel/compat_exec_domain.c | 5 ++--- arch/s390/kernel/compat_linux.c | 18 ++++++++++-------- arch/s390/kernel/compat_signal.c | 6 +++--- arch/s390/kernel/crash.c | 1 + arch/s390/kernel/debug.c | 18 ++++++++---------- arch/s390/kernel/ebcdic.c | 1 + arch/s390/kernel/kprobes.c | 3 ++- arch/s390/kernel/machine_kexec.c | 1 + arch/s390/kernel/module.c | 1 + arch/s390/kernel/ptrace.c | 36 ++++++++++++++++++----------------- arch/s390/kernel/setup.c | 7 ++----- arch/s390/kernel/smp.c | 19 +++++------------- arch/s390/kernel/time.c | 4 +--- arch/s390/kernel/traps.c | 13 ++++++------- arch/s390/kernel/vtime.c | 2 +- arch/s390/lib/uaccess.h | 23 ++++++++++++++++++++++ arch/s390/lib/uaccess_mvcos.c | 27 +++++++++++--------------- arch/s390/lib/uaccess_pt.c | 1 + arch/s390/lib/uaccess_std.c | 23 +++++++++++----------- arch/s390/mm/cmm.c | 2 +- arch/s390/mm/fault.c | 5 ++--- arch/s390/mm/init.c | 3 +-- 27 files changed, 121 insertions(+), 111 deletions(-) create mode 100644 arch/s390/lib/uaccess.h (limited to 'arch') diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c index b8c237290263..c9da7d16145e 100644 --- a/arch/s390/appldata/appldata_base.c +++ b/arch/s390/appldata/appldata_base.c @@ -81,7 +81,7 @@ static struct ctl_table appldata_dir_table[] = { /* * Timer */ -DEFINE_PER_CPU(struct vtimer_list, appldata_timer); +static DEFINE_PER_CPU(struct vtimer_list, appldata_timer); static atomic_t appldata_expire_count = ATOMIC_INIT(0); static DEFINE_SPINLOCK(appldata_timer_lock); diff --git a/arch/s390/appldata/appldata_mem.c b/arch/s390/appldata/appldata_mem.c index 8aea3698a77b..4ca615788702 100644 --- a/arch/s390/appldata/appldata_mem.c +++ b/arch/s390/appldata/appldata_mem.c @@ -36,7 +36,7 @@ * book: * http://oss.software.ibm.com/developerworks/opensource/linux390/index.shtml */ -struct appldata_mem_data { +static struct appldata_mem_data { u64 timestamp; u32 sync_count_1; /* after VM collected the record data, */ u32 sync_count_2; /* sync_count_1 and sync_count_2 should be the diff --git a/arch/s390/appldata/appldata_net_sum.c b/arch/s390/appldata/appldata_net_sum.c index 075e619bf37d..f64b8c867ae2 100644 --- a/arch/s390/appldata/appldata_net_sum.c +++ b/arch/s390/appldata/appldata_net_sum.c @@ -34,7 +34,7 @@ * book: * http://oss.software.ibm.com/developerworks/opensource/linux390/index.shtml */ -struct appldata_net_sum_data { +static struct appldata_net_sum_data { u64 timestamp; u32 sync_count_1; /* after VM collected the record data, */ u32 sync_count_2; /* sync_count_1 and sync_count_2 should be the diff --git a/arch/s390/crypto/aes_s390.c b/arch/s390/crypto/aes_s390.c index 15c9eec02928..3bf9ea4c993f 100644 --- a/arch/s390/crypto/aes_s390.c +++ b/arch/s390/crypto/aes_s390.c @@ -27,9 +27,9 @@ /* data block size for all key lengths */ #define AES_BLOCK_SIZE 16 -int has_aes_128 = 0; -int has_aes_192 = 0; -int has_aes_256 = 0; +static int has_aes_128 = 0; +static int has_aes_192 = 0; +static int has_aes_256 = 0; struct s390_aes_ctx { u8 iv[AES_BLOCK_SIZE]; diff --git a/arch/s390/crypto/des_check_key.c b/arch/s390/crypto/des_check_key.c index e3f5c5f238fe..955c441808d7 100644 --- a/arch/s390/crypto/des_check_key.c +++ b/arch/s390/crypto/des_check_key.c @@ -30,6 +30,7 @@ #include #include #include +#include "crypto_des.h" #define ROR(d,c,o) ((d) = (d) >> (c) | (d) << (o)) diff --git a/arch/s390/kernel/compat_exec_domain.c b/arch/s390/kernel/compat_exec_domain.c index 71d27c493568..914d49444f92 100644 --- a/arch/s390/kernel/compat_exec_domain.c +++ b/arch/s390/kernel/compat_exec_domain.c @@ -12,10 +12,9 @@ #include #include -struct exec_domain s390_exec_domain; +static struct exec_domain s390_exec_domain; -static int __init -s390_init (void) +static int __init s390_init (void) { s390_exec_domain.name = "Linux/s390"; s390_exec_domain.handler = NULL; diff --git a/arch/s390/kernel/compat_linux.c b/arch/s390/kernel/compat_linux.c index 5b33f823863a..cf84d697daed 100644 --- a/arch/s390/kernel/compat_linux.c +++ b/arch/s390/kernel/compat_linux.c @@ -416,7 +416,7 @@ asmlinkage long sys32_sysinfo(struct sysinfo32 __user *info) mm_segment_t old_fs = get_fs (); set_fs (KERNEL_DS); - ret = sys_sysinfo((struct sysinfo __user *) &s); + ret = sys_sysinfo((struct sysinfo __force __user *) &s); set_fs (old_fs); err = put_user (s.uptime, &info->uptime); err |= __put_user (s.loads[0], &info->loads[0]); @@ -445,7 +445,8 @@ asmlinkage long sys32_sched_rr_get_interval(compat_pid_t pid, mm_segment_t old_fs = get_fs (); set_fs (KERNEL_DS); - ret = sys_sched_rr_get_interval(pid, (struct timespec __user *) &t); + ret = sys_sched_rr_get_interval(pid, + (struct timespec __force __user *) &t); set_fs (old_fs); if (put_compat_timespec(&t, interval)) return -EFAULT; @@ -472,8 +473,8 @@ asmlinkage long sys32_rt_sigprocmask(int how, compat_sigset_t __user *set, } set_fs (KERNEL_DS); ret = sys_rt_sigprocmask(how, - set ? (sigset_t __user *) &s : NULL, - oset ? (sigset_t __user *) &s : NULL, + set ? (sigset_t __force __user *) &s : NULL, + oset ? (sigset_t __force __user *) &s : NULL, sigsetsize); set_fs (old_fs); if (ret) return ret; @@ -499,7 +500,7 @@ asmlinkage long sys32_rt_sigpending(compat_sigset_t __user *set, mm_segment_t old_fs = get_fs(); set_fs (KERNEL_DS); - ret = sys_rt_sigpending((sigset_t __user *) &s, sigsetsize); + ret = sys_rt_sigpending((sigset_t __force __user *) &s, sigsetsize); set_fs (old_fs); if (!ret) { switch (_NSIG_WORDS) { @@ -524,7 +525,7 @@ sys32_rt_sigqueueinfo(int pid, int sig, compat_siginfo_t __user *uinfo) if (copy_siginfo_from_user32(&info, uinfo)) return -EFAULT; set_fs (KERNEL_DS); - ret = sys_rt_sigqueueinfo(pid, sig, (siginfo_t __user *) &info); + ret = sys_rt_sigqueueinfo(pid, sig, (siginfo_t __force __user *) &info); set_fs (old_fs); return ret; } @@ -682,7 +683,7 @@ asmlinkage long sys32_sendfile(int out_fd, int in_fd, compat_off_t __user *offse set_fs(KERNEL_DS); ret = sys_sendfile(out_fd, in_fd, - offset ? (off_t __user *) &of : NULL, count); + offset ? (off_t __force __user *) &of : NULL, count); set_fs(old_fs); if (offset && put_user(of, offset)) @@ -703,7 +704,8 @@ asmlinkage long sys32_sendfile64(int out_fd, int in_fd, set_fs(KERNEL_DS); ret = sys_sendfile64(out_fd, in_fd, - offset ? (loff_t __user *) &lof : NULL, count); + offset ? (loff_t __force __user *) &lof : NULL, + count); set_fs(old_fs); if (offset && put_user(lof, offset)) diff --git a/arch/s390/kernel/compat_signal.c b/arch/s390/kernel/compat_signal.c index 861888ab8c13..8d17b2ab6f21 100644 --- a/arch/s390/kernel/compat_signal.c +++ b/arch/s390/kernel/compat_signal.c @@ -275,8 +275,8 @@ sys32_sigaltstack(const stack_t32 __user *uss, stack_t32 __user *uoss, } set_fs (KERNEL_DS); - ret = do_sigaltstack((stack_t __user *) (uss ? &kss : NULL), - (stack_t __user *) (uoss ? &koss : NULL), + ret = do_sigaltstack((stack_t __force __user *) (uss ? &kss : NULL), + (stack_t __force __user *) (uoss ? &koss : NULL), regs->gprs[15]); set_fs (old_fs); @@ -401,7 +401,7 @@ asmlinkage long sys32_rt_sigreturn(struct pt_regs *regs) goto badframe; set_fs (KERNEL_DS); - do_sigaltstack((stack_t __user *)&st, NULL, regs->gprs[15]); + do_sigaltstack((stack_t __force __user *)&st, NULL, regs->gprs[15]); set_fs (old_fs); return regs->gprs[2]; diff --git a/arch/s390/kernel/crash.c b/arch/s390/kernel/crash.c index 926cceeae0fa..8cc7c9fa64f5 100644 --- a/arch/s390/kernel/crash.c +++ b/arch/s390/kernel/crash.c @@ -9,6 +9,7 @@ #include #include +#include void machine_crash_shutdown(struct pt_regs *regs) { diff --git a/arch/s390/kernel/debug.c b/arch/s390/kernel/debug.c index bb57bc0e3fc8..f4b62df02aa2 100644 --- a/arch/s390/kernel/debug.c +++ b/arch/s390/kernel/debug.c @@ -120,7 +120,7 @@ struct debug_view debug_hex_ascii_view = { NULL }; -struct debug_view debug_level_view = { +static struct debug_view debug_level_view = { "level", &debug_prolog_level_fn, NULL, @@ -129,7 +129,7 @@ struct debug_view debug_level_view = { NULL }; -struct debug_view debug_pages_view = { +static struct debug_view debug_pages_view = { "pages", &debug_prolog_pages_fn, NULL, @@ -138,7 +138,7 @@ struct debug_view debug_pages_view = { NULL }; -struct debug_view debug_flush_view = { +static struct debug_view debug_flush_view = { "flush", NULL, NULL, @@ -156,14 +156,14 @@ struct debug_view debug_sprintf_view = { NULL }; - +/* used by dump analysis tools to determine version of debug feature */ unsigned int debug_feature_version = __DEBUG_FEATURE_VERSION; /* static globals */ static debug_info_t *debug_area_first = NULL; static debug_info_t *debug_area_last = NULL; -DECLARE_MUTEX(debug_lock); +static DECLARE_MUTEX(debug_lock); static int initialized; @@ -905,7 +905,7 @@ static struct ctl_table s390dbf_dir_table[] = { { .ctl_name = 0 } }; -struct ctl_table_header *s390dbf_sysctl_header; +static struct ctl_table_header *s390dbf_sysctl_header; void debug_stop_all(void) @@ -1300,8 +1300,7 @@ out: * flushes debug areas */ -void -debug_flush(debug_info_t* id, int area) +static void debug_flush(debug_info_t* id, int area) { unsigned long flags; int i,j; @@ -1511,8 +1510,7 @@ out: /* * clean up module */ -void -__exit debug_exit(void) +static void __exit debug_exit(void) { debugfs_remove(debug_debugfs_root_entry); unregister_sysctl_table(s390dbf_sysctl_header); diff --git a/arch/s390/kernel/ebcdic.c b/arch/s390/kernel/ebcdic.c index bb0f973137f0..cc0dc609d738 100644 --- a/arch/s390/kernel/ebcdic.c +++ b/arch/s390/kernel/ebcdic.c @@ -11,6 +11,7 @@ #include #include +#include /* * ASCII (IBM PC 437) -> EBCDIC 037 diff --git a/arch/s390/kernel/kprobes.c b/arch/s390/kernel/kprobes.c index 576368c4f605..70db60cbe480 100644 --- a/arch/s390/kernel/kprobes.c +++ b/arch/s390/kernel/kprobes.c @@ -365,7 +365,8 @@ void __kprobes kretprobe_trampoline_holder(void) /* * Called when the probe at kretprobe trampoline is hit */ -int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) +static int __kprobes trampoline_probe_handler(struct kprobe *p, + struct pt_regs *regs) { struct kretprobe_instance *ri = NULL; struct hlist_head *head, empty_rp; diff --git a/arch/s390/kernel/machine_kexec.c b/arch/s390/kernel/machine_kexec.c index f6d9bcc0f75b..52f57af252b4 100644 --- a/arch/s390/kernel/machine_kexec.c +++ b/arch/s390/kernel/machine_kexec.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/s390/kernel/module.c b/arch/s390/kernel/module.c index d989ed45a7aa..f5476f5c2e96 100644 --- a/arch/s390/kernel/module.c +++ b/arch/s390/kernel/module.c @@ -30,6 +30,7 @@ #include #include #include +#include #if 0 #define DEBUGP printk diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c index 8f36504075ed..29fde70090fe 100644 --- a/arch/s390/kernel/ptrace.c +++ b/arch/s390/kernel/ptrace.c @@ -86,15 +86,13 @@ FixPerRegisters(struct task_struct *task) per_info->control_regs.bits.storage_alt_space_ctl = 0; } -void -set_single_step(struct task_struct *task) +static void set_single_step(struct task_struct *task) { task->thread.per_info.single_step = 1; FixPerRegisters(task); } -void -clear_single_step(struct task_struct *task) +static void clear_single_step(struct task_struct *task) { task->thread.per_info.single_step = 0; FixPerRegisters(task); @@ -309,7 +307,7 @@ do_ptrace_normal(struct task_struct *child, long request, long addr, long data) copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0); if (copied != sizeof(tmp)) return -EIO; - return put_user(tmp, (unsigned long __user *) data); + return put_user(tmp, (unsigned long __force __user *) data); case PTRACE_PEEKUSR: /* read the word at location addr in the USER area. */ @@ -331,7 +329,7 @@ do_ptrace_normal(struct task_struct *child, long request, long addr, long data) case PTRACE_PEEKUSR_AREA: case PTRACE_POKEUSR_AREA: - if (copy_from_user(&parea, (void __user *) addr, + if (copy_from_user(&parea, (void __force __user *) addr, sizeof(parea))) return -EFAULT; addr = parea.kernel_addr; @@ -341,10 +339,11 @@ do_ptrace_normal(struct task_struct *child, long request, long addr, long data) if (request == PTRACE_PEEKUSR_AREA) ret = peek_user(child, addr, data); else { - addr_t tmp; - if (get_user (tmp, (addr_t __user *) data)) + addr_t utmp; + if (get_user(utmp, + (addr_t __force __user *) data)) return -EFAULT; - ret = poke_user(child, addr, tmp); + ret = poke_user(child, addr, utmp); } if (ret) return ret; @@ -550,7 +549,7 @@ do_ptrace_emu31(struct task_struct *child, long request, long addr, long data) copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0); if (copied != sizeof(tmp)) return -EIO; - return put_user(tmp, (unsigned int __user *) data); + return put_user(tmp, (unsigned int __force __user *) data); case PTRACE_PEEKUSR: /* read the word at location addr in the USER area. */ @@ -571,7 +570,7 @@ do_ptrace_emu31(struct task_struct *child, long request, long addr, long data) case PTRACE_PEEKUSR_AREA: case PTRACE_POKEUSR_AREA: - if (copy_from_user(&parea, (void __user *) addr, + if (copy_from_user(&parea, (void __force __user *) addr, sizeof(parea))) return -EFAULT; addr = parea.kernel_addr; @@ -581,10 +580,11 @@ do_ptrace_emu31(struct task_struct *child, long request, long addr, long data) if (request == PTRACE_PEEKUSR_AREA) ret = peek_user_emu31(child, addr, data); else { - __u32 tmp; - if (get_user (tmp, (__u32 __user *) data)) + __u32 utmp; + if (get_user(utmp, + (__u32 __force __user *) data)) return -EFAULT; - ret = poke_user_emu31(child, addr, tmp); + ret = poke_user_emu31(child, addr, utmp); } if (ret) return ret; @@ -595,17 +595,19 @@ do_ptrace_emu31(struct task_struct *child, long request, long addr, long data) return 0; case PTRACE_GETEVENTMSG: return put_user((__u32) child->ptrace_message, - (unsigned int __user *) data); + (unsigned int __force __user *) data); case PTRACE_GETSIGINFO: if (child->last_siginfo == NULL) return -EINVAL; - return copy_siginfo_to_user32((compat_siginfo_t __user *) data, + return copy_siginfo_to_user32((compat_siginfo_t + __force __user *) data, child->last_siginfo); case PTRACE_SETSIGINFO: if (child->last_siginfo == NULL) return -EINVAL; return copy_siginfo_from_user32(child->last_siginfo, - (compat_siginfo_t __user *) data); + (compat_siginfo_t + __force __user *) data); } return ptrace_request(child, request, addr, data); } diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index 5d8ee3baac14..1cbf956cb6b3 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -38,6 +38,7 @@ #include #include #include +#include #include #include @@ -117,7 +118,7 @@ void __devinit cpu_init (void) */ char vmhalt_cmd[128] = ""; char vmpoff_cmd[128] = ""; -char vmpanic_cmd[128] = ""; +static char vmpanic_cmd[128] = ""; static inline void strncpy_skip_quote(char *dst, char *src, int n) { @@ -275,10 +276,6 @@ static void __init conmode_default(void) } #ifdef CONFIG_SMP -extern void machine_restart_smp(char *); -extern void machine_halt_smp(void); -extern void machine_power_off_smp(void); - void (*_machine_restart)(char *command) = machine_restart_smp; void (*_machine_halt)(void) = machine_halt_smp; void (*_machine_power_off)(void) = machine_power_off_smp; diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index c0cd255fddbd..3cb7e1032072 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -22,23 +22,23 @@ #include #include - #include #include #include #include - #include #include #include #include - +#include +#include #include #include #include #include #include #include +#include extern volatile int __cpu_logical_map[]; @@ -53,12 +53,6 @@ cpumask_t cpu_possible_map = CPU_MASK_NONE; static struct task_struct *current_set[NR_CPUS]; -/* - * Reboot, halt and power_off routines for SMP. - */ -extern char vmhalt_cmd[]; -extern char vmpoff_cmd[]; - static void smp_ext_bitcall(int, ec_bit_sig); static void smp_ext_bitcall_others(ec_bit_sig); @@ -298,7 +292,7 @@ void machine_power_off_smp(void) * cpus are handled. */ -void do_ext_call_interrupt(__u16 code) +static void do_ext_call_interrupt(__u16 code) { unsigned long bits; @@ -385,7 +379,7 @@ struct ec_creg_mask_parms { /* * callback for setting/clearing control bits */ -void smp_ctl_bit_callback(void *info) { +static void smp_ctl_bit_callback(void *info) { struct ec_creg_mask_parms *pp = info; unsigned long cregs[16]; int i; @@ -458,9 +452,6 @@ __init smp_count_cpus(void) /* * Activate a secondary processor. */ -extern void init_cpu_timer(void); -extern void init_cpu_vtimer(void); - int __devinit start_secondary(void *cpuvoid) { /* Setup the cpu */ diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c index 6cceed4df73e..5d4a190fa307 100644 --- a/arch/s390/kernel/time.c +++ b/arch/s390/kernel/time.c @@ -245,7 +245,7 @@ static struct notifier_block nohz_idle_nb = { .notifier_call = nohz_idle_notify, }; -void __init nohz_init(void) +static void __init nohz_init(void) { if (register_idle_notifier(&nohz_idle_nb)) panic("Couldn't register idle notifier"); @@ -271,8 +271,6 @@ void init_cpu_timer(void) __ctl_load(cr0, 0, 0); } -extern void vtime_init(void); - static cycle_t read_tod_clock(void) { return get_clock(); diff --git a/arch/s390/kernel/traps.c b/arch/s390/kernel/traps.c index 3cbb0dcf1f1d..aa0d7ee71c78 100644 --- a/arch/s390/kernel/traps.c +++ b/arch/s390/kernel/traps.c @@ -283,7 +283,7 @@ char *task_show_regs(struct task_struct *task, char *buffer) return buffer; } -DEFINE_SPINLOCK(die_lock); +static DEFINE_SPINLOCK(die_lock); void die(const char * str, struct pt_regs * regs, long err) { @@ -364,8 +364,7 @@ void __kprobes do_single_step(struct pt_regs *regs) force_sig(SIGTRAP, current); } -asmlinkage void -default_trap_handler(struct pt_regs * regs, long interruption_code) +static void default_trap_handler(struct pt_regs * regs, long interruption_code) { if (regs->psw.mask & PSW_MASK_PSTATE) { local_irq_enable(); @@ -376,7 +375,7 @@ default_trap_handler(struct pt_regs * regs, long interruption_code) } #define DO_ERROR_INFO(signr, str, name, sicode, siaddr) \ -asmlinkage void name(struct pt_regs * regs, long interruption_code) \ +static void name(struct pt_regs * regs, long interruption_code) \ { \ siginfo_t info; \ info.si_signo = signr; \ @@ -442,7 +441,7 @@ do_fp_trap(struct pt_regs *regs, void __user *location, "floating point exception", regs, &si); } -asmlinkage void illegal_op(struct pt_regs * regs, long interruption_code) +static void illegal_op(struct pt_regs * regs, long interruption_code) { siginfo_t info; __u8 opcode[6]; @@ -585,7 +584,7 @@ DO_ERROR_INFO(SIGILL, "specification exception", specification_exception, ILL_ILLOPN, get_check_address(regs)); #endif -asmlinkage void data_exception(struct pt_regs * regs, long interruption_code) +static void data_exception(struct pt_regs * regs, long interruption_code) { __u16 __user *location; int signal = 0; @@ -675,7 +674,7 @@ asmlinkage void data_exception(struct pt_regs * regs, long interruption_code) } } -asmlinkage void space_switch_exception(struct pt_regs * regs, long int_code) +static void space_switch_exception(struct pt_regs * regs, long int_code) { siginfo_t info; diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c index 21baaf5496d6..01f3d29bdb06 100644 --- a/arch/s390/kernel/vtime.c +++ b/arch/s390/kernel/vtime.c @@ -25,7 +25,7 @@ #include static ext_int_info_t ext_int_info_timer; -DEFINE_PER_CPU(struct vtimer_queue, virt_cpu_timer); +static DEFINE_PER_CPU(struct vtimer_queue, virt_cpu_timer); #ifdef CONFIG_VIRT_CPU_ACCOUNTING /* diff --git a/arch/s390/lib/uaccess.h b/arch/s390/lib/uaccess.h new file mode 100644 index 000000000000..126011df14f1 --- /dev/null +++ b/arch/s390/lib/uaccess.h @@ -0,0 +1,23 @@ +/* + * arch/s390/uaccess.h + * + * Copyright IBM Corp. 2007 + * + */ + +#ifndef __ARCH_S390_LIB_UACCESS_H +#define __ARCH_S390_LIB_UACCESS_H + +extern size_t copy_from_user_std(size_t, const void __user *, void *); +extern size_t copy_to_user_std(size_t, void __user *, const void *); +extern size_t strnlen_user_std(size_t, const char __user *); +extern size_t strncpy_from_user_std(size_t, const char __user *, char *); +extern int futex_atomic_cmpxchg_std(int __user *, int, int); +extern int futex_atomic_op_std(int, int __user *, int, int *); + +extern size_t copy_from_user_pt(size_t, const void __user *, void *); +extern size_t copy_to_user_pt(size_t, void __user *, const void *); +extern int futex_atomic_op_pt(int, int __user *, int, int *); +extern int futex_atomic_cmpxchg_pt(int __user *, int, int); + +#endif /* __ARCH_S390_LIB_UACCESS_H */ diff --git a/arch/s390/lib/uaccess_mvcos.c b/arch/s390/lib/uaccess_mvcos.c index f9a23d57eb79..78c48f88f5f7 100644 --- a/arch/s390/lib/uaccess_mvcos.c +++ b/arch/s390/lib/uaccess_mvcos.c @@ -12,6 +12,7 @@ #include #include #include +#include "uaccess.h" #ifndef __s390x__ #define AHI "ahi" @@ -27,10 +28,7 @@ #define SLR "slgr" #endif -extern size_t copy_from_user_std(size_t, const void __user *, void *); -extern size_t copy_to_user_std(size_t, void __user *, const void *); - -size_t copy_from_user_mvcos(size_t size, const void __user *ptr, void *x) +static size_t copy_from_user_mvcos(size_t size, const void __user *ptr, void *x) { register unsigned long reg0 asm("0") = 0x81UL; unsigned long tmp1, tmp2; @@ -69,14 +67,14 @@ size_t copy_from_user_mvcos(size_t size, const void __user *ptr, void *x) return size; } -size_t copy_from_user_mvcos_check(size_t size, const void __user *ptr, void *x) +static size_t copy_from_user_mvcos_check(size_t size, const void __user *ptr, void *x) { if (size <= 256) return copy_from_user_std(size, ptr, x); return copy_from_user_mvcos(size, ptr, x); } -size_t copy_to_user_mvcos(size_t size, void __user *ptr, const void *x) +static size_t copy_to_user_mvcos(size_t size, void __user *ptr, const void *x) { register unsigned long reg0 asm("0") = 0x810000UL; unsigned long tmp1, tmp2; @@ -105,14 +103,16 @@ size_t copy_to_user_mvcos(size_t size, void __user *ptr, const void *x) return size; } -size_t copy_to_user_mvcos_check(size_t size, void __user *ptr, const void *x) +static size_t copy_to_user_mvcos_check(size_t size, void __user *ptr, + const void *x) { if (size <= 256) return copy_to_user_std(size, ptr, x); return copy_to_user_mvcos(size, ptr, x); } -size_t copy_in_user_mvcos(size_t size, void __user *to, const void __user *from) +static size_t copy_in_user_mvcos(size_t size, void __user *to, + const void __user *from) { register unsigned long reg0 asm("0") = 0x810081UL; unsigned long tmp1, tmp2; @@ -134,7 +134,7 @@ size_t copy_in_user_mvcos(size_t size, void __user *to, const void __user *from) return size; } -size_t clear_user_mvcos(size_t size, void __user *to) +static size_t clear_user_mvcos(size_t size, void __user *to) { register unsigned long reg0 asm("0") = 0x810000UL; unsigned long tmp1, tmp2; @@ -162,11 +162,6 @@ size_t clear_user_mvcos(size_t size, void __user *to) return size; } -extern size_t strnlen_user_std(size_t, const char __user *); -extern size_t strncpy_from_user_std(size_t, const char __user *, char *); -extern int futex_atomic_op(int, int __user *, int, int *); -extern int futex_atomic_cmpxchg(int __user *, int, int); - struct uaccess_ops uaccess_mvcos = { .copy_from_user = copy_from_user_mvcos_check, .copy_from_user_small = copy_from_user_std, @@ -176,6 +171,6 @@ struct uaccess_ops uaccess_mvcos = { .clear_user = clear_user_mvcos, .strnlen_user = strnlen_user_std, .strncpy_from_user = strncpy_from_user_std, - .futex_atomic_op = futex_atomic_op, - .futex_atomic_cmpxchg = futex_atomic_cmpxchg, + .futex_atomic_op = futex_atomic_op_std, + .futex_atomic_cmpxchg = futex_atomic_cmpxchg_std, }; diff --git a/arch/s390/lib/uaccess_pt.c b/arch/s390/lib/uaccess_pt.c index 49c3e46b4065..24ead559c7bb 100644 --- a/arch/s390/lib/uaccess_pt.c +++ b/arch/s390/lib/uaccess_pt.c @@ -12,6 +12,7 @@ #include #include #include +#include "uaccess.h" static inline int __handle_fault(struct mm_struct *mm, unsigned long address, int write_access) diff --git a/arch/s390/lib/uaccess_std.c b/arch/s390/lib/uaccess_std.c index 56a0214e9928..28c4500a58d0 100644 --- a/arch/s390/lib/uaccess_std.c +++ b/arch/s390/lib/uaccess_std.c @@ -13,6 +13,7 @@ #include #include #include +#include "uaccess.h" #ifndef __s390x__ #define AHI "ahi" @@ -28,9 +29,6 @@ #define SLR "slgr" #endif -extern size_t copy_from_user_pt(size_t n, const void __user *from, void *to); -extern size_t copy_to_user_pt(size_t n, void __user *to, const void *from); - size_t copy_from_user_std(size_t size, const void __user *ptr, void *x) { unsigned long tmp1, tmp2; @@ -72,7 +70,8 @@ size_t copy_from_user_std(size_t size, const void __user *ptr, void *x) return size; } -size_t copy_from_user_std_check(size_t size, const void __user *ptr, void *x) +static size_t copy_from_user_std_check(size_t size, const void __user *ptr, + void *x) { if (size <= 1024) return copy_from_user_std(size, ptr, x); @@ -110,14 +109,16 @@ size_t copy_to_user_std(size_t size, void __user *ptr, const void *x) return size; } -size_t copy_to_user_std_check(size_t size, void __user *ptr, const void *x) +static size_t copy_to_user_std_check(size_t size, void __user *ptr, + const void *x) { if (size <= 1024) return copy_to_user_std(size, ptr, x); return copy_to_user_pt(size, ptr, x); } -size_t copy_in_user_std(size_t size, void __user *to, const void __user *from) +static size_t copy_in_user_std(size_t size, void __user *to, + const void __user *from) { unsigned long tmp1; @@ -148,7 +149,7 @@ size_t copy_in_user_std(size_t size, void __user *to, const void __user *from) return size; } -size_t clear_user_std(size_t size, void __user *to) +static size_t clear_user_std(size_t size, void __user *to) { unsigned long tmp1, tmp2; @@ -254,7 +255,7 @@ size_t strncpy_from_user_std(size_t size, const char __user *src, char *dst) : "0" (-EFAULT), "d" (oparg), "a" (uaddr), \ "m" (*uaddr) : "cc"); -int futex_atomic_op(int op, int __user *uaddr, int oparg, int *old) +int futex_atomic_op_std(int op, int __user *uaddr, int oparg, int *old) { int oldval = 0, newval, ret; @@ -286,7 +287,7 @@ int futex_atomic_op(int op, int __user *uaddr, int oparg, int *old) return ret; } -int futex_atomic_cmpxchg(int __user *uaddr, int oldval, int newval) +int futex_atomic_cmpxchg_std(int __user *uaddr, int oldval, int newval) { int ret; @@ -311,6 +312,6 @@ struct uaccess_ops uaccess_std = { .clear_user = clear_user_std, .strnlen_user = strnlen_user_std, .strncpy_from_user = strncpy_from_user_std, - .futex_atomic_op = futex_atomic_op, - .futex_atomic_cmpxchg = futex_atomic_cmpxchg, + .futex_atomic_op = futex_atomic_op_std, + .futex_atomic_cmpxchg = futex_atomic_cmpxchg_std, }; diff --git a/arch/s390/mm/cmm.c b/arch/s390/mm/cmm.c index 607f50ead1fd..fb87e2320eba 100644 --- a/arch/s390/mm/cmm.c +++ b/arch/s390/mm/cmm.c @@ -414,7 +414,7 @@ cmm_smsg_target(char *from, char *msg) } #endif -struct ctl_table_header *cmm_sysctl_header; +static struct ctl_table_header *cmm_sysctl_header; static int cmm_init (void) diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c index cd85e34d8703..3382e29f34a4 100644 --- a/arch/s390/mm/fault.c +++ b/arch/s390/mm/fault.c @@ -52,7 +52,7 @@ extern int sysctl_userprocess_debug; extern void die(const char *,struct pt_regs *,long); #ifdef CONFIG_KPROBES -ATOMIC_NOTIFIER_HEAD(notify_page_fault_chain); +static ATOMIC_NOTIFIER_HEAD(notify_page_fault_chain); int register_page_fault_notifier(struct notifier_block *nb) { return atomic_notifier_chain_register(¬ify_page_fault_chain, nb); @@ -452,8 +452,7 @@ void pfault_fini(void) : : "a" (&refbk), "m" (refbk) : "cc"); } -asmlinkage void -pfault_interrupt(__u16 error_code) +static void pfault_interrupt(__u16 error_code) { struct task_struct *tsk; __u16 subcode; diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c index 4bb21be3b007..6315f75d3bc0 100644 --- a/arch/s390/mm/init.c +++ b/arch/s390/mm/init.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include @@ -107,8 +108,6 @@ static void __init setup_ro_region(void) } } -extern void vmem_map_init(void); - /* * paging_init() sets up the page tables */ -- cgit v1.2.3 From 60383201c2c155fae2aaffd483d09eb4198b6356 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 5 Feb 2007 21:16:52 +0100 Subject: [S390] Remove pointless/unreliable kernel messages. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/setup.c | 3 --- arch/s390/mm/init.c | 2 -- 2 files changed, 5 deletions(-) (limited to 'arch') diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index 1cbf956cb6b3..25bf7277d311 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -492,9 +492,6 @@ static void __init setup_memory_end(void) } if (!memory_end) memory_end = memory_size; - if (real_size > memory_end) - printk("More memory detected than supported. Unused: %luk\n", - (real_size - memory_end) >> 10); } static void __init diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c index 6315f75d3bc0..0e7e9acab9e1 100644 --- a/arch/s390/mm/init.c +++ b/arch/s390/mm/init.c @@ -175,8 +175,6 @@ void __init mem_init(void) printk("Write protected kernel read-only data: %#lx - %#lx\n", (unsigned long)&__start_rodata, PFN_ALIGN((unsigned long)&__end_rodata) - 1); - printk("Virtual memmap size: %ldk\n", - (max_pfn * sizeof(struct page)) >> 10); } void free_initmem(void) -- cgit v1.2.3 From bda3563fb28e3a4260ac3566cf11700792a336bb Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Mon, 5 Feb 2007 21:16:54 +0100 Subject: [S390] cpcmd with vmalloc addresses. Change the bounce buffer logic of cpcmd. diag8 needs _real_ memory below 2GB. Therefore vmalloced data does not work. As the data might cross a page boundary, we cannot use virt_to_page either. The solution is to use virt_to_page only in the check for a bounce buffer. There was a redundant check for response==NULL. response < 2GB contains this check as well. I also removed the rlen==0 check, since rlen=0 and response!=NULL would be a caller bug and response==NULL is already checked. Signed-off-by: Christian Borntraeger Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/cpcmd.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/s390/kernel/cpcmd.c b/arch/s390/kernel/cpcmd.c index a5972f1541fe..6c89f30c8e31 100644 --- a/arch/s390/kernel/cpcmd.c +++ b/arch/s390/kernel/cpcmd.c @@ -16,6 +16,7 @@ #include #include #include +#include static DEFINE_SPINLOCK(cpcmd_lock); static char cpcmd_buf[241]; @@ -88,13 +89,8 @@ int cpcmd(const char *cmd, char *response, int rlen, int *response_code) int len; unsigned long flags; - if ((rlen == 0) || (response == NULL) - || !((unsigned long)response >> 31)) { - spin_lock_irqsave(&cpcmd_lock, flags); - len = __cpcmd(cmd, response, rlen, response_code); - spin_unlock_irqrestore(&cpcmd_lock, flags); - } - else { + if ((virt_to_phys(response) != (unsigned long) response) || + (((unsigned long)response + rlen) >> 31)) { lowbuf = kmalloc(rlen, GFP_KERNEL | GFP_DMA); if (!lowbuf) { printk(KERN_WARNING @@ -106,6 +102,10 @@ int cpcmd(const char *cmd, char *response, int rlen, int *response_code) spin_unlock_irqrestore(&cpcmd_lock, flags); memcpy(response, lowbuf, rlen); kfree(lowbuf); + } else { + spin_lock_irqsave(&cpcmd_lock, flags); + len = __cpcmd(cmd, response, rlen, response_code); + spin_unlock_irqrestore(&cpcmd_lock, flags); } return len; } -- cgit v1.2.3 From b075083f35309c4f3e50886d6f31a3a0e07a29b5 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 5 Feb 2007 21:17:07 +0100 Subject: [S390] Fix FCP dump feature detection. FCP dump feature detection works only if the sclp command in head.S was succesful. Since the sclp command is skipped if diag260 works, we don't have any dump feature detection anymore. Bug was introduced with d57de5a36791cb1b7285649c62f183b0d3505f7d. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/head64.S | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/s390/kernel/head64.S b/arch/s390/kernel/head64.S index 6ba3f4512dd1..e940e802cb40 100644 --- a/arch/s390/kernel/head64.S +++ b/arch/s390/kernel/head64.S @@ -81,7 +81,6 @@ startup_continue: aghi %r1,1 # size is one more than end larl %r2,memory_chunk stg %r1,8(%r2) # store size of chunk - j .Ldonemem .Lslowmemdetect: l %r2,.Lrcp-.LPG1(%r13) # Read SCP forced command word @@ -156,6 +155,11 @@ startup_continue: # # find memory chunks. # + larl %r9,memory_chunk # skip tprot loop if diag260 + lg %r9,8(%r9) # memory detection was successful + ltgr %r9,%r9 + jne .Ldonemem + lgr %r9,%r3 # end of mem larl %r1,.Lchkmem # set program check address stg %r1,__LC_PGM_NEW_PSW+8 -- cgit v1.2.3 From 444f0e5489e7ac4bca5c4748d7d846c352a5cd03 Mon Sep 17 00:00:00 2001 From: Gerald Schaefer Date: Mon, 5 Feb 2007 21:17:11 +0100 Subject: [S390] Show loaded DCSS segments under /proc/iomem. Currently loaded DCSS segments are now listed in /proc/iomem with their name followed by a trailing "(DCSS)". Signed-off-by: Gerald Schaefer Signed-off-by: Martin Schwidefsky --- arch/s390/mm/extmem.c | 64 +++++++++++++++++++++++++++++++++++++++++++-------- 1 file changed, 54 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/s390/mm/extmem.c b/arch/s390/mm/extmem.c index 775bf19e742b..8bffadb5e537 100644 --- a/arch/s390/mm/extmem.c +++ b/arch/s390/mm/extmem.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include #include @@ -70,6 +71,7 @@ struct qin64 { struct dcss_segment { struct list_head list; char dcss_name[8]; + char res_name[15]; unsigned long start_addr; unsigned long end; atomic_t ref_count; @@ -77,6 +79,7 @@ struct dcss_segment { unsigned int vm_segtype; struct qrange range[6]; int segcnt; + struct resource *res; }; static DEFINE_MUTEX(dcss_lock); @@ -303,6 +306,29 @@ __segment_load (char *name, int do_nonshared, unsigned long *addr, unsigned long goto out_free; } + seg->res = kzalloc(sizeof(struct resource), GFP_KERNEL); + if (seg->res == NULL) { + rc = -ENOMEM; + goto out_shared; + } + seg->res->flags = IORESOURCE_BUSY | IORESOURCE_MEM; + seg->res->start = seg->start_addr; + seg->res->end = seg->end; + memcpy(&seg->res_name, seg->dcss_name, 8); + EBCASC(seg->res_name, 8); + seg->res_name[8] = '\0'; + strncat(seg->res_name, " (DCSS)", 7); + seg->res->name = seg->res_name; + rc = seg->vm_segtype; + if (rc == SEG_TYPE_SC || + ((rc == SEG_TYPE_SR || rc == SEG_TYPE_ER) && !do_nonshared)) + seg->res->flags |= IORESOURCE_READONLY; + if (request_resource(&iomem_resource, seg->res)) { + rc = -EBUSY; + kfree(seg->res); + goto out_shared; + } + if (do_nonshared) dcss_command = DCSS_LOADNSR; else @@ -316,12 +342,11 @@ __segment_load (char *name, int do_nonshared, unsigned long *addr, unsigned long rc = dcss_diag_translate_rc (seg->end); dcss_diag(DCSS_PURGESEG, seg->dcss_name, &seg->start_addr, &seg->end); - goto out_shared; + goto out_resource; } seg->do_nonshared = do_nonshared; atomic_set(&seg->ref_count, 1); list_add(&seg->list, &dcss_list); - rc = seg->vm_segtype; *addr = seg->start_addr; *end = seg->end; if (do_nonshared) @@ -329,12 +354,16 @@ __segment_load (char *name, int do_nonshared, unsigned long *addr, unsigned long "type %s in non-shared mode\n", name, (void*)seg->start_addr, (void*)seg->end, segtype_string[seg->vm_segtype]); - else + else { PRINT_INFO ("segment_load: loaded segment %s range %p .. %p " "type %s in shared mode\n", name, (void*)seg->start_addr, (void*)seg->end, segtype_string[seg->vm_segtype]); + } goto out; + out_resource: + release_resource(seg->res); + kfree(seg->res); out_shared: remove_shared_memory(seg->start_addr, seg->end - seg->start_addr + 1); out_free: @@ -401,6 +430,7 @@ segment_load (char *name, int do_nonshared, unsigned long *addr, * -ENOENT : no such segment (segment gone!) * -EAGAIN : segment is in use by other exploiters, try later * -EINVAL : no segment with the given name is currently loaded - name invalid + * -EBUSY : segment can temporarily not be used (overlaps with dcss) * 0 : operation succeeded */ int @@ -428,12 +458,24 @@ segment_modify_shared (char *name, int do_nonshared) rc = -EAGAIN; goto out_unlock; } - dcss_diag(DCSS_PURGESEG, seg->dcss_name, - &dummy, &dummy); - if (do_nonshared) + release_resource(seg->res); + if (do_nonshared) { dcss_command = DCSS_LOADNSR; - else - dcss_command = DCSS_LOADNOLY; + seg->res->flags &= ~IORESOURCE_READONLY; + } else { + dcss_command = DCSS_LOADNOLY; + if (seg->vm_segtype == SEG_TYPE_SR || + seg->vm_segtype == SEG_TYPE_ER) + seg->res->flags |= IORESOURCE_READONLY; + } + if (request_resource(&iomem_resource, seg->res)) { + PRINT_WARN("segment_modify_shared: could not reload segment %s" + " - overlapping resources\n", name); + rc = -EBUSY; + kfree(seg->res); + goto out_del; + } + dcss_diag(DCSS_PURGESEG, seg->dcss_name, &dummy, &dummy); diag_cc = dcss_diag(dcss_command, seg->dcss_name, &seg->start_addr, &seg->end); if (diag_cc > 1) { @@ -446,9 +488,9 @@ segment_modify_shared (char *name, int do_nonshared) rc = 0; goto out_unlock; out_del: + remove_shared_memory(seg->start_addr, seg->end - seg->start_addr + 1); list_del(&seg->list); - dcss_diag(DCSS_PURGESEG, seg->dcss_name, - &dummy, &dummy); + dcss_diag(DCSS_PURGESEG, seg->dcss_name, &dummy, &dummy); kfree(seg); out_unlock: mutex_unlock(&dcss_lock); @@ -478,6 +520,8 @@ segment_unload(char *name) } if (atomic_dec_return(&seg->ref_count) != 0) goto out_unlock; + release_resource(seg->res); + kfree(seg->res); remove_shared_memory(seg->start_addr, seg->end - seg->start_addr + 1); list_del(&seg->list); dcss_diag(DCSS_PURGESEG, seg->dcss_name, &dummy, &dummy); -- cgit v1.2.3 From 35df8d53f5c951ac0cd79f1084e6787ca5980207 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 5 Feb 2007 21:17:29 +0100 Subject: [S390] Fix kprobes breakpoint handling. In case of an illegal op the die notifier gets called with DIE_TRAP instead of DIE_BPT first. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/traps.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/s390/kernel/traps.c b/arch/s390/kernel/traps.c index aa0d7ee71c78..f0e5a320e2ec 100644 --- a/arch/s390/kernel/traps.c +++ b/arch/s390/kernel/traps.c @@ -490,8 +490,15 @@ static void illegal_op(struct pt_regs * regs, long interruption_code) #endif } else signal = SIGILL; - } else - signal = SIGILL; + } else { + /* + * If we get an illegal op in kernel mode, send it through the + * kprobes notifier. If kprobes doesn't pick it up, SIGILL + */ + if (notify_die(DIE_BPT, "bpt", regs, interruption_code, + 3, SIGTRAP) != NOTIFY_STOP) + signal = SIGILL; + } #ifdef CONFIG_MATHEMU if (signal == SIGFPE) -- cgit v1.2.3 From d42335a33b2ca2406d57bb8f0cf00adbdda8cede Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 5 Feb 2007 21:17:32 +0100 Subject: [S390] kretprobe_trampoline_holder() in wrong section. kretprobe_trampoline_holder() is in kprobes section but used to register a kprobe in arch_init_kprobes(). Hence register_kprobe() and therefore arch_init_kprobes() will fail. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/kprobes.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/s390/kernel/kprobes.c b/arch/s390/kernel/kprobes.c index 70db60cbe480..b2e1dc89a8c6 100644 --- a/arch/s390/kernel/kprobes.c +++ b/arch/s390/kernel/kprobes.c @@ -356,7 +356,7 @@ no_kprobe: * - When the probed function returns, this probe * causes the handlers to fire */ -void __kprobes kretprobe_trampoline_holder(void) +void kretprobe_trampoline_holder(void) { asm volatile(".global kretprobe_trampoline\n" "kretprobe_trampoline: bcr 0,0\n"); -- cgit v1.2.3 From 86aa9fc2456d8a662f299a70bdb70987209170f0 Mon Sep 17 00:00:00 2001 From: Jan Glauber Date: Mon, 5 Feb 2007 21:18:14 +0100 Subject: [S390] move crypto options and some cleanup. This patch moves the config options for the s390 crypto instructions to the standard "Hardware crypto devices" menu. In addition some cleanup has been done: use a flag for supported keylengths, add a warning about machien limitation, return ENOTSUPP in case the hardware has no support, remove superfluous printks and update email addresses. Signed-off-by: Jan Glauber Signed-off-by: Martin Schwidefsky --- arch/s390/crypto/Kconfig | 60 ++++++++ arch/s390/crypto/Makefile | 2 - arch/s390/crypto/aes_s390.c | 47 +++--- arch/s390/crypto/crypt_s390.h | 280 ++++++++++++++++++------------------ arch/s390/crypto/crypt_s390_query.c | 129 ----------------- arch/s390/crypto/des_check_key.c | 5 +- arch/s390/crypto/des_s390.c | 8 +- arch/s390/crypto/sha1_s390.c | 83 +++++------ arch/s390/crypto/sha256_s390.c | 11 +- arch/s390/defconfig | 8 +- 10 files changed, 272 insertions(+), 361 deletions(-) create mode 100644 arch/s390/crypto/Kconfig delete mode 100644 arch/s390/crypto/crypt_s390_query.c (limited to 'arch') diff --git a/arch/s390/crypto/Kconfig b/arch/s390/crypto/Kconfig new file mode 100644 index 000000000000..99ff9f08e4d7 --- /dev/null +++ b/arch/s390/crypto/Kconfig @@ -0,0 +1,60 @@ +config CRYPTO_SHA1_S390 + tristate "SHA1 digest algorithm" + depends on S390 + select CRYPTO_ALGAPI + help + This is the s390 hardware accelerated implementation of the + SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2). + +config CRYPTO_SHA256_S390 + tristate "SHA256 digest algorithm" + depends on S390 + select CRYPTO_ALGAPI + help + This is the s390 hardware accelerated implementation of the + SHA256 secure hash standard (DFIPS 180-2). + + This version of SHA implements a 256 bit hash with 128 bits of + security against collision attacks. + +config CRYPTO_DES_S390 + tristate "DES and Triple DES cipher algorithms" + depends on S390 + select CRYPTO_ALGAPI + select CRYPTO_BLKCIPHER + help + This us the s390 hardware accelerated implementation of the + DES cipher algorithm (FIPS 46-2), and Triple DES EDE (FIPS 46-3). + +config CRYPTO_AES_S390 + tristate "AES cipher algorithms" + depends on S390 + select CRYPTO_ALGAPI + select CRYPTO_BLKCIPHER + help + This is the s390 hardware accelerated implementation of the + AES cipher algorithms (FIPS-197). AES uses the Rijndael + algorithm. + + Rijndael appears to be consistently a very good performer in + both hardware and software across a wide range of computing + environments regardless of its use in feedback or non-feedback + modes. Its key setup time is excellent, and its key agility is + good. Rijndael's very low memory requirements make it very well + suited for restricted-space environments, in which it also + demonstrates excellent performance. Rijndael's operations are + among the easiest to defend against power and timing attacks. + + On s390 the System z9-109 currently only supports the key size + of 128 bit. + +config S390_PRNG + tristate "Pseudo random number generator device driver" + depends on S390 + default "m" + help + Select this option if you want to use the s390 pseudo random number + generator. The PRNG is part of the cryptograhic processor functions + and uses triple-DES to generate secure random numbers like the + ANSI X9.17 standard. The PRNG is usable via the char device + /dev/prandom. diff --git a/arch/s390/crypto/Makefile b/arch/s390/crypto/Makefile index bfe2541dc5cf..21720c03d653 100644 --- a/arch/s390/crypto/Makefile +++ b/arch/s390/crypto/Makefile @@ -6,5 +6,3 @@ obj-$(CONFIG_CRYPTO_SHA1_S390) += sha1_s390.o obj-$(CONFIG_CRYPTO_SHA256_S390) += sha256_s390.o obj-$(CONFIG_CRYPTO_DES_S390) += des_s390.o des_check_key.o obj-$(CONFIG_CRYPTO_AES_S390) += aes_s390.o - -obj-$(CONFIG_CRYPTO_TEST) += crypt_s390_query.o diff --git a/arch/s390/crypto/aes_s390.c b/arch/s390/crypto/aes_s390.c index 3bf9ea4c993f..91636353f6f0 100644 --- a/arch/s390/crypto/aes_s390.c +++ b/arch/s390/crypto/aes_s390.c @@ -4,7 +4,7 @@ * s390 implementation of the AES Cipher Algorithm. * * s390 Version: - * Copyright (C) 2005 IBM Deutschland GmbH, IBM Corporation + * Copyright IBM Corp. 2005,2007 * Author(s): Jan Glauber (jang@de.ibm.com) * * Derived from "crypto/aes.c" @@ -27,9 +27,11 @@ /* data block size for all key lengths */ #define AES_BLOCK_SIZE 16 -static int has_aes_128 = 0; -static int has_aes_192 = 0; -static int has_aes_256 = 0; +#define AES_KEYLEN_128 1 +#define AES_KEYLEN_192 2 +#define AES_KEYLEN_256 4 + +static char keylen_flag = 0; struct s390_aes_ctx { u8 iv[AES_BLOCK_SIZE]; @@ -47,20 +49,19 @@ static int aes_set_key(struct crypto_tfm *tfm, const u8 *in_key, switch (key_len) { case 16: - if (!has_aes_128) + if (!(keylen_flag & AES_KEYLEN_128)) goto fail; break; case 24: - if (!has_aes_192) + if (!(keylen_flag & AES_KEYLEN_192)) goto fail; break; case 32: - if (!has_aes_256) + if (!(keylen_flag & AES_KEYLEN_256)) goto fail; break; default: - /* invalid key length */ goto fail; break; } @@ -322,34 +323,32 @@ static int __init aes_init(void) int ret; if (crypt_s390_func_available(KM_AES_128_ENCRYPT)) - has_aes_128 = 1; + keylen_flag |= AES_KEYLEN_128; if (crypt_s390_func_available(KM_AES_192_ENCRYPT)) - has_aes_192 = 1; + keylen_flag |= AES_KEYLEN_192; if (crypt_s390_func_available(KM_AES_256_ENCRYPT)) - has_aes_256 = 1; + keylen_flag |= AES_KEYLEN_256; + + if (!keylen_flag) + return -EOPNOTSUPP; - if (!has_aes_128 && !has_aes_192 && !has_aes_256) - return -ENOSYS; + /* z9 109 and z9 BC/EC only support 128 bit key length */ + if (keylen_flag == AES_KEYLEN_128) + printk(KERN_INFO + "aes_s390: hardware acceleration only available for" + "128 bit keys\n"); ret = crypto_register_alg(&aes_alg); - if (ret != 0) { - printk(KERN_INFO "crypt_s390: aes-s390 couldn't be loaded.\n"); + if (ret) goto aes_err; - } ret = crypto_register_alg(&ecb_aes_alg); - if (ret != 0) { - printk(KERN_INFO - "crypt_s390: ecb-aes-s390 couldn't be loaded.\n"); + if (ret) goto ecb_aes_err; - } ret = crypto_register_alg(&cbc_aes_alg); - if (ret != 0) { - printk(KERN_INFO - "crypt_s390: cbc-aes-s390 couldn't be loaded.\n"); + if (ret) goto cbc_aes_err; - } out: return ret; diff --git a/arch/s390/crypto/crypt_s390.h b/arch/s390/crypto/crypt_s390.h index 2b137089f625..2b92c2fd12d4 100644 --- a/arch/s390/crypto/crypt_s390.h +++ b/arch/s390/crypto/crypt_s390.h @@ -3,8 +3,9 @@ * * Support for s390 cryptographic instructions. * - * Copyright (C) 2003 IBM Deutschland GmbH, IBM Corporation - * Author(s): Thomas Spatzier (tspat@de.ibm.com) + * Copyright IBM Corp. 2003,2007 + * Author(s): Thomas Spatzier + * Jan Glauber (jan.glauber@de.ibm.com) * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the Free @@ -32,7 +33,8 @@ enum crypt_s390_operations { CRYPT_S390_KMAC = 0x0500 }; -/* function codes for KM (CIPHER MESSAGE) instruction +/* + * function codes for KM (CIPHER MESSAGE) instruction * 0x80 is the decipher modifier bit */ enum crypt_s390_km_func { @@ -51,7 +53,8 @@ enum crypt_s390_km_func { KM_AES_256_DECRYPT = CRYPT_S390_KM | 0x14 | 0x80, }; -/* function codes for KMC (CIPHER MESSAGE WITH CHAINING) +/* + * function codes for KMC (CIPHER MESSAGE WITH CHAINING) * instruction */ enum crypt_s390_kmc_func { @@ -70,7 +73,8 @@ enum crypt_s390_kmc_func { KMC_AES_256_DECRYPT = CRYPT_S390_KMC | 0x14 | 0x80, }; -/* function codes for KIMD (COMPUTE INTERMEDIATE MESSAGE DIGEST) +/* + * function codes for KIMD (COMPUTE INTERMEDIATE MESSAGE DIGEST) * instruction */ enum crypt_s390_kimd_func { @@ -79,7 +83,8 @@ enum crypt_s390_kimd_func { KIMD_SHA_256 = CRYPT_S390_KIMD | 2, }; -/* function codes for KLMD (COMPUTE LAST MESSAGE DIGEST) +/* + * function codes for KLMD (COMPUTE LAST MESSAGE DIGEST) * instruction */ enum crypt_s390_klmd_func { @@ -88,7 +93,8 @@ enum crypt_s390_klmd_func { KLMD_SHA_256 = CRYPT_S390_KLMD | 2, }; -/* function codes for KMAC (COMPUTE MESSAGE AUTHENTICATION CODE) +/* + * function codes for KMAC (COMPUTE MESSAGE AUTHENTICATION CODE) * instruction */ enum crypt_s390_kmac_func { @@ -98,229 +104,219 @@ enum crypt_s390_kmac_func { KMAC_TDEA_192 = CRYPT_S390_KMAC | 3 }; -/* status word for s390 crypto instructions' QUERY functions */ -struct crypt_s390_query_status { - u64 high; - u64 low; -}; - -/* +/** + * crypt_s390_km: + * @func: the function code passed to KM; see crypt_s390_km_func + * @param: address of parameter block; see POP for details on each func + * @dest: address of destination memory area + * @src: address of source memory area + * @src_len: length of src operand in bytes + * * Executes the KM (CIPHER MESSAGE) operation of the CPU. - * @param func: the function code passed to KM; see crypt_s390_km_func - * @param param: address of parameter block; see POP for details on each func - * @param dest: address of destination memory area - * @param src: address of source memory area - * @param src_len: length of src operand in bytes - * @returns < zero for failure, 0 for the query func, number of processed bytes - * for encryption/decryption funcs + * + * Returns -1 for failure, 0 for the query func, number of processed + * bytes for encryption/decryption funcs */ -static inline int -crypt_s390_km(long func, void* param, u8* dest, const u8* src, long src_len) +static inline int crypt_s390_km(long func, void *param, + u8 *dest, const u8 *src, long src_len) { register long __func asm("0") = func & CRYPT_S390_FUNC_MASK; - register void* __param asm("1") = param; - register const u8* __src asm("2") = src; + register void *__param asm("1") = param; + register const u8 *__src asm("2") = src; register long __src_len asm("3") = src_len; - register u8* __dest asm("4") = dest; + register u8 *__dest asm("4") = dest; int ret; asm volatile( "0: .insn rre,0xb92e0000,%3,%1 \n" /* KM opcode */ "1: brc 1,0b \n" /* handle partial completion */ - " ahi %0,%h7\n" - "2: ahi %0,%h8\n" - "3:\n" - EX_TABLE(0b,3b) EX_TABLE(1b,2b) + " la %0,0\n" + "2:\n" + EX_TABLE(0b,2b) EX_TABLE(1b,2b) : "=d" (ret), "+a" (__src), "+d" (__src_len), "+a" (__dest) - : "d" (__func), "a" (__param), "0" (-EFAULT), - "K" (ENOSYS), "K" (-ENOSYS + EFAULT) : "cc", "memory"); + : "d" (__func), "a" (__param), "0" (-1) : "cc", "memory"); if (ret < 0) return ret; return (func & CRYPT_S390_FUNC_MASK) ? src_len - __src_len : __src_len; } -/* +/** + * crypt_s390_kmc: + * @func: the function code passed to KM; see crypt_s390_kmc_func + * @param: address of parameter block; see POP for details on each func + * @dest: address of destination memory area + * @src: address of source memory area + * @src_len: length of src operand in bytes + * * Executes the KMC (CIPHER MESSAGE WITH CHAINING) operation of the CPU. - * @param func: the function code passed to KM; see crypt_s390_kmc_func - * @param param: address of parameter block; see POP for details on each func - * @param dest: address of destination memory area - * @param src: address of source memory area - * @param src_len: length of src operand in bytes - * @returns < zero for failure, 0 for the query func, number of processed bytes - * for encryption/decryption funcs + * + * Returns -1 for failure, 0 for the query func, number of processed + * bytes for encryption/decryption funcs */ -static inline int -crypt_s390_kmc(long func, void* param, u8* dest, const u8* src, long src_len) +static inline int crypt_s390_kmc(long func, void *param, + u8 *dest, const u8 *src, long src_len) { register long __func asm("0") = func & CRYPT_S390_FUNC_MASK; - register void* __param asm("1") = param; - register const u8* __src asm("2") = src; + register void *__param asm("1") = param; + register const u8 *__src asm("2") = src; register long __src_len asm("3") = src_len; - register u8* __dest asm("4") = dest; + register u8 *__dest asm("4") = dest; int ret; asm volatile( "0: .insn rre,0xb92f0000,%3,%1 \n" /* KMC opcode */ "1: brc 1,0b \n" /* handle partial completion */ - " ahi %0,%h7\n" - "2: ahi %0,%h8\n" - "3:\n" - EX_TABLE(0b,3b) EX_TABLE(1b,2b) + " la %0,0\n" + "2:\n" + EX_TABLE(0b,2b) EX_TABLE(1b,2b) : "=d" (ret), "+a" (__src), "+d" (__src_len), "+a" (__dest) - : "d" (__func), "a" (__param), "0" (-EFAULT), - "K" (ENOSYS), "K" (-ENOSYS + EFAULT) : "cc", "memory"); + : "d" (__func), "a" (__param), "0" (-1) : "cc", "memory"); if (ret < 0) return ret; return (func & CRYPT_S390_FUNC_MASK) ? src_len - __src_len : __src_len; } -/* +/** + * crypt_s390_kimd: + * @func: the function code passed to KM; see crypt_s390_kimd_func + * @param: address of parameter block; see POP for details on each func + * @src: address of source memory area + * @src_len: length of src operand in bytes + * * Executes the KIMD (COMPUTE INTERMEDIATE MESSAGE DIGEST) operation * of the CPU. - * @param func: the function code passed to KM; see crypt_s390_kimd_func - * @param param: address of parameter block; see POP for details on each func - * @param src: address of source memory area - * @param src_len: length of src operand in bytes - * @returns < zero for failure, 0 for the query func, number of processed bytes - * for digest funcs + * + * Returns -1 for failure, 0 for the query func, number of processed + * bytes for digest funcs */ -static inline int -crypt_s390_kimd(long func, void* param, const u8* src, long src_len) +static inline int crypt_s390_kimd(long func, void *param, + const u8 *src, long src_len) { register long __func asm("0") = func & CRYPT_S390_FUNC_MASK; - register void* __param asm("1") = param; - register const u8* __src asm("2") = src; + register void *__param asm("1") = param; + register const u8 *__src asm("2") = src; register long __src_len asm("3") = src_len; int ret; asm volatile( "0: .insn rre,0xb93e0000,%1,%1 \n" /* KIMD opcode */ "1: brc 1,0b \n" /* handle partial completion */ - " ahi %0,%h6\n" - "2: ahi %0,%h7\n" - "3:\n" - EX_TABLE(0b,3b) EX_TABLE(1b,2b) + " la %0,0\n" + "2:\n" + EX_TABLE(0b,2b) EX_TABLE(1b,2b) : "=d" (ret), "+a" (__src), "+d" (__src_len) - : "d" (__func), "a" (__param), "0" (-EFAULT), - "K" (ENOSYS), "K" (-ENOSYS + EFAULT) : "cc", "memory"); + : "d" (__func), "a" (__param), "0" (-1) : "cc", "memory"); if (ret < 0) return ret; return (func & CRYPT_S390_FUNC_MASK) ? src_len - __src_len : __src_len; } -/* +/** + * crypt_s390_klmd: + * @func: the function code passed to KM; see crypt_s390_klmd_func + * @param: address of parameter block; see POP for details on each func + * @src: address of source memory area + * @src_len: length of src operand in bytes + * * Executes the KLMD (COMPUTE LAST MESSAGE DIGEST) operation of the CPU. - * @param func: the function code passed to KM; see crypt_s390_klmd_func - * @param param: address of parameter block; see POP for details on each func - * @param src: address of source memory area - * @param src_len: length of src operand in bytes - * @returns < zero for failure, 0 for the query func, number of processed bytes - * for digest funcs + * + * Returns -1 for failure, 0 for the query func, number of processed + * bytes for digest funcs */ -static inline int -crypt_s390_klmd(long func, void* param, const u8* src, long src_len) +static inline int crypt_s390_klmd(long func, void *param, + const u8 *src, long src_len) { register long __func asm("0") = func & CRYPT_S390_FUNC_MASK; - register void* __param asm("1") = param; - register const u8* __src asm("2") = src; + register void *__param asm("1") = param; + register const u8 *__src asm("2") = src; register long __src_len asm("3") = src_len; int ret; asm volatile( "0: .insn rre,0xb93f0000,%1,%1 \n" /* KLMD opcode */ "1: brc 1,0b \n" /* handle partial completion */ - " ahi %0,%h6\n" - "2: ahi %0,%h7\n" - "3:\n" - EX_TABLE(0b,3b) EX_TABLE(1b,2b) + " la %0,0\n" + "2:\n" + EX_TABLE(0b,2b) EX_TABLE(1b,2b) : "=d" (ret), "+a" (__src), "+d" (__src_len) - : "d" (__func), "a" (__param), "0" (-EFAULT), - "K" (ENOSYS), "K" (-ENOSYS + EFAULT) : "cc", "memory"); + : "d" (__func), "a" (__param), "0" (-1) : "cc", "memory"); if (ret < 0) return ret; return (func & CRYPT_S390_FUNC_MASK) ? src_len - __src_len : __src_len; } -/* +/** + * crypt_s390_kmac: + * @func: the function code passed to KM; see crypt_s390_klmd_func + * @param: address of parameter block; see POP for details on each func + * @src: address of source memory area + * @src_len: length of src operand in bytes + * * Executes the KMAC (COMPUTE MESSAGE AUTHENTICATION CODE) operation * of the CPU. - * @param func: the function code passed to KM; see crypt_s390_klmd_func - * @param param: address of parameter block; see POP for details on each func - * @param src: address of source memory area - * @param src_len: length of src operand in bytes - * @returns < zero for failure, 0 for the query func, number of processed bytes - * for digest funcs + * + * Returns -1 for failure, 0 for the query func, number of processed + * bytes for digest funcs */ -static inline int -crypt_s390_kmac(long func, void* param, const u8* src, long src_len) +static inline int crypt_s390_kmac(long func, void *param, + const u8 *src, long src_len) { register long __func asm("0") = func & CRYPT_S390_FUNC_MASK; - register void* __param asm("1") = param; - register const u8* __src asm("2") = src; + register void *__param asm("1") = param; + register const u8 *__src asm("2") = src; register long __src_len asm("3") = src_len; int ret; asm volatile( "0: .insn rre,0xb91e0000,%1,%1 \n" /* KLAC opcode */ "1: brc 1,0b \n" /* handle partial completion */ - " ahi %0,%h6\n" - "2: ahi %0,%h7\n" - "3:\n" - EX_TABLE(0b,3b) EX_TABLE(1b,2b) + " la %0,0\n" + "2:\n" + EX_TABLE(0b,2b) EX_TABLE(1b,2b) : "=d" (ret), "+a" (__src), "+d" (__src_len) - : "d" (__func), "a" (__param), "0" (-EFAULT), - "K" (ENOSYS), "K" (-ENOSYS + EFAULT) : "cc", "memory"); + : "d" (__func), "a" (__param), "0" (-1) : "cc", "memory"); if (ret < 0) return ret; return (func & CRYPT_S390_FUNC_MASK) ? src_len - __src_len : __src_len; } /** + * crypt_s390_func_available: + * @func: the function code of the specific function; 0 if op in general + * * Tests if a specific crypto function is implemented on the machine. - * @param func: the function code of the specific function; 0 if op in general - * @return 1 if func available; 0 if func or op in general not available + * + * Returns 1 if func available; 0 if func or op in general not available */ -static inline int -crypt_s390_func_available(int func) +static inline int crypt_s390_func_available(int func) { + unsigned char status[16]; int ret; - struct crypt_s390_query_status status = { - .high = 0, - .low = 0 - }; - switch (func & CRYPT_S390_OP_MASK){ - case CRYPT_S390_KM: - ret = crypt_s390_km(KM_QUERY, &status, NULL, NULL, 0); - break; - case CRYPT_S390_KMC: - ret = crypt_s390_kmc(KMC_QUERY, &status, NULL, NULL, 0); - break; - case CRYPT_S390_KIMD: - ret = crypt_s390_kimd(KIMD_QUERY, &status, NULL, 0); - break; - case CRYPT_S390_KLMD: - ret = crypt_s390_klmd(KLMD_QUERY, &status, NULL, 0); - break; - case CRYPT_S390_KMAC: - ret = crypt_s390_kmac(KMAC_QUERY, &status, NULL, 0); - break; - default: - ret = 0; - return ret; - } - if (ret >= 0){ - func &= CRYPT_S390_FUNC_MASK; - func &= 0x7f; //mask modifier bit - if (func < 64){ - ret = (status.high >> (64 - func - 1)) & 0x1; - } else { - ret = (status.low >> (128 - func - 1)) & 0x1; - } - } else { - ret = 0; + switch (func & CRYPT_S390_OP_MASK) { + case CRYPT_S390_KM: + ret = crypt_s390_km(KM_QUERY, &status, NULL, NULL, 0); + break; + case CRYPT_S390_KMC: + ret = crypt_s390_kmc(KMC_QUERY, &status, NULL, NULL, 0); + break; + case CRYPT_S390_KIMD: + ret = crypt_s390_kimd(KIMD_QUERY, &status, NULL, 0); + break; + case CRYPT_S390_KLMD: + ret = crypt_s390_klmd(KLMD_QUERY, &status, NULL, 0); + break; + case CRYPT_S390_KMAC: + ret = crypt_s390_kmac(KMAC_QUERY, &status, NULL, 0); + break; + default: + return 0; } - return ret; + if (ret < 0) + return 0; + func &= CRYPT_S390_FUNC_MASK; + func &= 0x7f; /* mask modifier bit */ + return (status[func >> 3] & (0x80 >> (func & 7))) != 0; } -#endif // _CRYPTO_ARCH_S390_CRYPT_S390_H +#endif /* _CRYPTO_ARCH_S390_CRYPT_S390_H */ diff --git a/arch/s390/crypto/crypt_s390_query.c b/arch/s390/crypto/crypt_s390_query.c deleted file mode 100644 index 54fb11d7fadd..000000000000 --- a/arch/s390/crypto/crypt_s390_query.c +++ /dev/null @@ -1,129 +0,0 @@ -/* - * Cryptographic API. - * - * Support for s390 cryptographic instructions. - * Testing module for querying processor crypto capabilities. - * - * Copyright (c) 2003 IBM Deutschland Entwicklung GmbH, IBM Corporation - * Author(s): Thomas Spatzier (tspat@de.ibm.com) - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation; either version 2 of the License, or (at your option) - * any later version. - * - */ -#include -#include -#include -#include -#include "crypt_s390.h" - -static void query_available_functions(void) -{ - printk(KERN_INFO "#####################\n"); - - /* query available KM functions */ - printk(KERN_INFO "KM_QUERY: %d\n", - crypt_s390_func_available(KM_QUERY)); - printk(KERN_INFO "KM_DEA: %d\n", - crypt_s390_func_available(KM_DEA_ENCRYPT)); - printk(KERN_INFO "KM_TDEA_128: %d\n", - crypt_s390_func_available(KM_TDEA_128_ENCRYPT)); - printk(KERN_INFO "KM_TDEA_192: %d\n", - crypt_s390_func_available(KM_TDEA_192_ENCRYPT)); - printk(KERN_INFO "KM_AES_128: %d\n", - crypt_s390_func_available(KM_AES_128_ENCRYPT)); - printk(KERN_INFO "KM_AES_192: %d\n", - crypt_s390_func_available(KM_AES_192_ENCRYPT)); - printk(KERN_INFO "KM_AES_256: %d\n", - crypt_s390_func_available(KM_AES_256_ENCRYPT)); - - /* query available KMC functions */ - printk(KERN_INFO "KMC_QUERY: %d\n", - crypt_s390_func_available(KMC_QUERY)); - printk(KERN_INFO "KMC_DEA: %d\n", - crypt_s390_func_available(KMC_DEA_ENCRYPT)); - printk(KERN_INFO "KMC_TDEA_128: %d\n", - crypt_s390_func_available(KMC_TDEA_128_ENCRYPT)); - printk(KERN_INFO "KMC_TDEA_192: %d\n", - crypt_s390_func_available(KMC_TDEA_192_ENCRYPT)); - printk(KERN_INFO "KMC_AES_128: %d\n", - crypt_s390_func_available(KMC_AES_128_ENCRYPT)); - printk(KERN_INFO "KMC_AES_192: %d\n", - crypt_s390_func_available(KMC_AES_192_ENCRYPT)); - printk(KERN_INFO "KMC_AES_256: %d\n", - crypt_s390_func_available(KMC_AES_256_ENCRYPT)); - - /* query available KIMD functions */ - printk(KERN_INFO "KIMD_QUERY: %d\n", - crypt_s390_func_available(KIMD_QUERY)); - printk(KERN_INFO "KIMD_SHA_1: %d\n", - crypt_s390_func_available(KIMD_SHA_1)); - printk(KERN_INFO "KIMD_SHA_256: %d\n", - crypt_s390_func_available(KIMD_SHA_256)); - - /* query available KLMD functions */ - printk(KERN_INFO "KLMD_QUERY: %d\n", - crypt_s390_func_available(KLMD_QUERY)); - printk(KERN_INFO "KLMD_SHA_1: %d\n", - crypt_s390_func_available(KLMD_SHA_1)); - printk(KERN_INFO "KLMD_SHA_256: %d\n", - crypt_s390_func_available(KLMD_SHA_256)); - - /* query available KMAC functions */ - printk(KERN_INFO "KMAC_QUERY: %d\n", - crypt_s390_func_available(KMAC_QUERY)); - printk(KERN_INFO "KMAC_DEA: %d\n", - crypt_s390_func_available(KMAC_DEA)); - printk(KERN_INFO "KMAC_TDEA_128: %d\n", - crypt_s390_func_available(KMAC_TDEA_128)); - printk(KERN_INFO "KMAC_TDEA_192: %d\n", - crypt_s390_func_available(KMAC_TDEA_192)); -} - -static int init(void) -{ - struct crypt_s390_query_status status = { - .high = 0, - .low = 0 - }; - - printk(KERN_INFO "crypt_s390: querying available crypto functions\n"); - crypt_s390_km(KM_QUERY, &status, NULL, NULL, 0); - printk(KERN_INFO "KM:\t%016llx %016llx\n", - (unsigned long long) status.high, - (unsigned long long) status.low); - status.high = status.low = 0; - crypt_s390_kmc(KMC_QUERY, &status, NULL, NULL, 0); - printk(KERN_INFO "KMC:\t%016llx %016llx\n", - (unsigned long long) status.high, - (unsigned long long) status.low); - status.high = status.low = 0; - crypt_s390_kimd(KIMD_QUERY, &status, NULL, 0); - printk(KERN_INFO "KIMD:\t%016llx %016llx\n", - (unsigned long long) status.high, - (unsigned long long) status.low); - status.high = status.low = 0; - crypt_s390_klmd(KLMD_QUERY, &status, NULL, 0); - printk(KERN_INFO "KLMD:\t%016llx %016llx\n", - (unsigned long long) status.high, - (unsigned long long) status.low); - status.high = status.low = 0; - crypt_s390_kmac(KMAC_QUERY, &status, NULL, 0); - printk(KERN_INFO "KMAC:\t%016llx %016llx\n", - (unsigned long long) status.high, - (unsigned long long) status.low); - - query_available_functions(); - return -ECANCELED; -} - -static void __exit cleanup(void) -{ -} - -module_init(init); -module_exit(cleanup); - -MODULE_LICENSE("GPL"); diff --git a/arch/s390/crypto/des_check_key.c b/arch/s390/crypto/des_check_key.c index 955c441808d7..5706af266442 100644 --- a/arch/s390/crypto/des_check_key.c +++ b/arch/s390/crypto/des_check_key.c @@ -10,8 +10,9 @@ * scatterlist interface. Changed LGPL to GPL per section 3 of the LGPL. * * s390 Version: - * Copyright (C) 2003 IBM Deutschland GmbH, IBM Corporation - * Author(s): Thomas Spatzier (tspat@de.ibm.com) + * Copyright IBM Corp. 2003 + * Author(s): Thomas Spatzier + * Jan Glauber (jan.glauber@de.ibm.com) * * Derived from "crypto/des.c" * Copyright (c) 1992 Dana L. How. diff --git a/arch/s390/crypto/des_s390.c b/arch/s390/crypto/des_s390.c index 2aba04852fe3..ea22707f435f 100644 --- a/arch/s390/crypto/des_s390.c +++ b/arch/s390/crypto/des_s390.c @@ -3,9 +3,9 @@ * * s390 implementation of the DES Cipher Algorithm. * - * Copyright (c) 2003 IBM Deutschland Entwicklung GmbH, IBM Corporation - * Author(s): Thomas Spatzier (tspat@de.ibm.com) - * + * Copyright IBM Corp. 2003,2007 + * Author(s): Thomas Spatzier + * Jan Glauber (jan.glauber@de.ibm.com) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -557,7 +557,7 @@ static int init(void) if (!crypt_s390_func_available(KM_DEA_ENCRYPT) || !crypt_s390_func_available(KM_TDEA_128_ENCRYPT) || !crypt_s390_func_available(KM_TDEA_192_ENCRYPT)) - return -ENOSYS; + return -EOPNOTSUPP; ret = crypto_register_alg(&des_alg); if (ret) diff --git a/arch/s390/crypto/sha1_s390.c b/arch/s390/crypto/sha1_s390.c index 49ca8690ee39..969639f31977 100644 --- a/arch/s390/crypto/sha1_s390.c +++ b/arch/s390/crypto/sha1_s390.c @@ -8,8 +8,9 @@ * implementation written by Steve Reid. * * s390 Version: - * Copyright (C) 2003 IBM Deutschland GmbH, IBM Corporation - * Author(s): Thomas Spatzier (tspat@de.ibm.com) + * Copyright IBM Corp. 2003,2007 + * Author(s): Thomas Spatzier + * Jan Glauber (jan.glauber@de.ibm.com) * * Derived from "crypto/sha1.c" * Copyright (c) Alan Smithee. @@ -43,16 +44,14 @@ struct crypt_s390_sha1_ctx { static void sha1_init(struct crypto_tfm *tfm) { struct crypt_s390_sha1_ctx *ctx = crypto_tfm_ctx(tfm); - static const u32 initstate[5] = { - 0x67452301, - 0xEFCDAB89, - 0x98BADCFE, - 0x10325476, - 0xC3D2E1F0 - }; + + ctx->state[0] = 0x67452301; + ctx->state[1] = 0xEFCDAB89; + ctx->state[2] = 0x98BADCFE; + ctx->state[3] = 0x10325476; + ctx->state[4] = 0xC3D2E1F0; ctx->count = 0; - memcpy(ctx->state, &initstate, sizeof(initstate)); ctx->buf_len = 0; } @@ -63,13 +62,13 @@ static void sha1_update(struct crypto_tfm *tfm, const u8 *data, long imd_len; sctx = crypto_tfm_ctx(tfm); - sctx->count += len * 8; //message bit length + sctx->count += len * 8; /* message bit length */ - //anything in buffer yet? -> must be completed + /* anything in buffer yet? -> must be completed */ if (sctx->buf_len && (sctx->buf_len + len) >= SHA1_BLOCK_SIZE) { - //complete full block and hash + /* complete full block and hash */ memcpy(sctx->buffer + sctx->buf_len, data, - SHA1_BLOCK_SIZE - sctx->buf_len); + SHA1_BLOCK_SIZE - sctx->buf_len); crypt_s390_kimd(KIMD_SHA_1, sctx->state, sctx->buffer, SHA1_BLOCK_SIZE); data += SHA1_BLOCK_SIZE - sctx->buf_len; @@ -77,37 +76,36 @@ static void sha1_update(struct crypto_tfm *tfm, const u8 *data, sctx->buf_len = 0; } - //rest of data contains full blocks? + /* rest of data contains full blocks? */ imd_len = len & ~0x3ful; - if (imd_len){ + if (imd_len) { crypt_s390_kimd(KIMD_SHA_1, sctx->state, data, imd_len); data += imd_len; len -= imd_len; } - //anything left? store in buffer - if (len){ + /* anything left? store in buffer */ + if (len) { memcpy(sctx->buffer + sctx->buf_len , data, len); sctx->buf_len += len; } } -static void -pad_message(struct crypt_s390_sha1_ctx* sctx) +static void pad_message(struct crypt_s390_sha1_ctx* sctx) { int index; index = sctx->buf_len; - sctx->buf_len = (sctx->buf_len < 56)? - SHA1_BLOCK_SIZE:2 * SHA1_BLOCK_SIZE; - //start pad with 1 + sctx->buf_len = (sctx->buf_len < 56) ? + SHA1_BLOCK_SIZE:2 * SHA1_BLOCK_SIZE; + /* start pad with 1 */ sctx->buffer[index] = 0x80; - //pad with zeros + /* pad with zeros */ index++; memset(sctx->buffer + index, 0x00, sctx->buf_len - index); - //append length + /* append length */ memcpy(sctx->buffer + sctx->buf_len - 8, &sctx->count, - sizeof sctx->count); + sizeof sctx->count); } /* Add padding and return the message digest. */ @@ -115,47 +113,40 @@ static void sha1_final(struct crypto_tfm *tfm, u8 *out) { struct crypt_s390_sha1_ctx *sctx = crypto_tfm_ctx(tfm); - //must perform manual padding + /* must perform manual padding */ pad_message(sctx); crypt_s390_kimd(KIMD_SHA_1, sctx->state, sctx->buffer, sctx->buf_len); - //copy digest to out + /* copy digest to out */ memcpy(out, sctx->state, SHA1_DIGEST_SIZE); - /* Wipe context */ + /* wipe context */ memset(sctx, 0, sizeof *sctx); } static struct crypto_alg alg = { .cra_name = "sha1", - .cra_driver_name = "sha1-s390", + .cra_driver_name= "sha1-s390", .cra_priority = CRYPT_S390_PRIORITY, .cra_flags = CRYPTO_ALG_TYPE_DIGEST, .cra_blocksize = SHA1_BLOCK_SIZE, .cra_ctxsize = sizeof(struct crypt_s390_sha1_ctx), .cra_module = THIS_MODULE, - .cra_list = LIST_HEAD_INIT(alg.cra_list), + .cra_list = LIST_HEAD_INIT(alg.cra_list), .cra_u = { .digest = { .dia_digestsize = SHA1_DIGEST_SIZE, - .dia_init = sha1_init, - .dia_update = sha1_update, - .dia_final = sha1_final } } + .dia_init = sha1_init, + .dia_update = sha1_update, + .dia_final = sha1_final } } }; -static int -init(void) +static int __init init(void) { - int ret = -ENOSYS; + if (!crypt_s390_func_available(KIMD_SHA_1)) + return -EOPNOTSUPP; - if (crypt_s390_func_available(KIMD_SHA_1)){ - ret = crypto_register_alg(&alg); - if (ret == 0){ - printk(KERN_INFO "crypt_s390: sha1_s390 loaded.\n"); - } - } - return ret; + return crypto_register_alg(&alg); } -static void __exit -fini(void) +static void __exit fini(void) { crypto_unregister_alg(&alg); } diff --git a/arch/s390/crypto/sha256_s390.c b/arch/s390/crypto/sha256_s390.c index 8e4e67503fe7..78436c696d37 100644 --- a/arch/s390/crypto/sha256_s390.c +++ b/arch/s390/crypto/sha256_s390.c @@ -4,7 +4,7 @@ * s390 implementation of the SHA256 Secure Hash Algorithm. * * s390 Version: - * Copyright (C) 2005 IBM Deutschland GmbH, IBM Corporation + * Copyright IBM Corp. 2005,2007 * Author(s): Jan Glauber (jang@de.ibm.com) * * Derived from "crypto/sha256.c" @@ -143,15 +143,10 @@ static struct crypto_alg alg = { static int init(void) { - int ret; - if (!crypt_s390_func_available(KIMD_SHA_256)) - return -ENOSYS; + return -EOPNOTSUPP; - ret = crypto_register_alg(&alg); - if (ret != 0) - printk(KERN_INFO "crypt_s390: sha256_s390 couldn't be loaded."); - return ret; + return crypto_register_alg(&alg); } static void __exit fini(void) diff --git a/arch/s390/defconfig b/arch/s390/defconfig index 5368cf4a350e..46bb38515b0d 100644 --- a/arch/s390/defconfig +++ b/arch/s390/defconfig @@ -724,9 +724,7 @@ CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_SHA1 is not set -# CONFIG_CRYPTO_SHA1_S390 is not set # CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA256_S390 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set @@ -735,12 +733,10 @@ CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_CBC=y # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_DES_S390 is not set # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_SERPENT is not set # CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_AES_S390 is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set # CONFIG_CRYPTO_TEA is not set @@ -755,6 +751,10 @@ CONFIG_CRYPTO_CBC=y # # Hardware crypto devices # +# CONFIG_CRYPTO_SHA1_S390 is not set +# CONFIG_CRYPTO_SHA256_S390 is not set +# CONFIG_CRYPTO_DES_S390 is not set +# CONFIG_CRYPTO_AES_S390 is not set # # Library routines -- cgit v1.2.3 From c1821c2e9711adc3cd298a16b7237c92a2cee78d Mon Sep 17 00:00:00 2001 From: Gerald Schaefer Date: Mon, 5 Feb 2007 21:18:17 +0100 Subject: [S390] noexec protection This provides a noexec protection on s390 hardware. Our hardware does not have any bits left in the pte for a hw noexec bit, so this is a different approach using shadow page tables and a special addressing mode that allows separate address spaces for code and data. As a special feature of our "secondary-space" addressing mode, separate page tables can be specified for the translation of data addresses (storage operands) and instruction addresses. The shadow page table is used for the instruction addresses and the standard page table for the data addresses. The shadow page table is linked to the standard page table by a pointer in page->lru.next of the struct page corresponding to the page that contains the standard page table (since page->private is not really private with the pte_lock and the page table pages are not in the LRU list). Depending on the software bits of a pte, it is either inserted into both page tables or just into the standard (data) page table. Pages of a vma that does not have the VM_EXEC bit set get mapped only in the data address space. Any try to execute code on such a page will cause a page translation exception. The standard reaction to this is a SIGSEGV with two exceptions: the two system call opcodes 0x0a77 (sys_sigreturn) and 0x0aad (sys_rt_sigreturn) are allowed. They are stored by the kernel to the signal stack frame. Unfortunately, the signal return mechanism cannot be modified to use an SA_RESTORER because the exception unwinding code depends on the system call opcode stored behind the signal stack frame. This feature requires that user space is executed in secondary-space mode and the kernel in home-space mode, which means that the addressing modes need to be switched and that the noexec protection only works for user space. After switching the addressing modes, we cannot use the mvcp/mvcs instructions anymore to copy between kernel and user space. A new mvcos instruction has been added to the z9 EC/BC hardware which allows to copy between arbitrary address spaces, but on older hardware the page tables need to be walked manually. Signed-off-by: Gerald Schaefer Signed-off-by: Martin Schwidefsky --- arch/s390/Kconfig | 25 +++ arch/s390/defconfig | 2 + arch/s390/kernel/compat_linux.c | 6 + arch/s390/kernel/compat_linux.h | 31 ---- arch/s390/kernel/compat_signal.c | 2 +- arch/s390/kernel/ipl.c | 4 +- arch/s390/kernel/process.c | 4 +- arch/s390/kernel/ptrace.c | 10 +- arch/s390/kernel/setup.c | 98 +++++++++++- arch/s390/kernel/signal.c | 2 +- arch/s390/kernel/smp.c | 2 +- arch/s390/lib/uaccess_mvcos.c | 53 +++++++ arch/s390/lib/uaccess_pt.c | 320 ++++++++++++++++++++++++++++++++++++++- arch/s390/mm/fault.c | 88 ++++++++++- arch/s390/mm/init.c | 6 +- arch/s390/mm/vmem.c | 14 +- 16 files changed, 606 insertions(+), 61 deletions(-) (limited to 'arch') diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index 12272361c018..5c7e981c115b 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -134,6 +134,31 @@ config AUDIT_ARCH bool default y +config S390_SWITCH_AMODE + bool "Switch kernel/user addressing modes" + help + This option allows to switch the addressing modes of kernel and user + space. The kernel parameter switch_amode=on will enable this feature, + default is disabled. Enabling this (via kernel parameter) on machines + earlier than IBM System z9-109 EC/BC will reduce system performance. + + Note that this option will also be selected by selecting the execute + protection option below. Enabling the execute protection via the + noexec kernel parameter will also switch the addressing modes, + independent of the switch_amode kernel parameter. + + +config S390_EXEC_PROTECT + bool "Data execute protection" + select S390_SWITCH_AMODE + help + This option allows to enable a buffer overflow protection for user + space programs and it also selects the addressing mode option above. + The kernel parameter noexec=on will enable this feature and also + switch the addressing modes, default is disabled. Enabling this (via + kernel parameter) on machines earlier than IBM System z9-109 EC/BC + will reduce system performance. + comment "Code generation options" choice diff --git a/arch/s390/defconfig b/arch/s390/defconfig index 46bb38515b0d..12eb97f9c1d1 100644 --- a/arch/s390/defconfig +++ b/arch/s390/defconfig @@ -108,6 +108,8 @@ CONFIG_DEFAULT_MIGRATION_COST=1000000 CONFIG_COMPAT=y CONFIG_SYSVIPC_COMPAT=y CONFIG_AUDIT_ARCH=y +CONFIG_S390_SWITCH_AMODE=y +CONFIG_S390_EXEC_PROTECT=y # # Code generation options diff --git a/arch/s390/kernel/compat_linux.c b/arch/s390/kernel/compat_linux.c index cf84d697daed..666bb6daa148 100644 --- a/arch/s390/kernel/compat_linux.c +++ b/arch/s390/kernel/compat_linux.c @@ -69,6 +69,12 @@ #include "compat_linux.h" +long psw_user32_bits = (PSW_BASE32_BITS | PSW_MASK_DAT | PSW_ASC_HOME | + PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK | + PSW_MASK_PSTATE | PSW_DEFAULT_KEY); +long psw32_user_bits = (PSW32_BASE_BITS | PSW32_MASK_DAT | PSW32_ASC_HOME | + PSW32_MASK_IO | PSW32_MASK_EXT | PSW32_MASK_MCHECK | + PSW32_MASK_PSTATE); /* For this source file, we want overflow handling. */ diff --git a/arch/s390/kernel/compat_linux.h b/arch/s390/kernel/compat_linux.h index 1a18e29668ef..e89f8c0c42a0 100644 --- a/arch/s390/kernel/compat_linux.h +++ b/arch/s390/kernel/compat_linux.h @@ -115,37 +115,6 @@ typedef struct __u32 addr; } _psw_t32 __attribute__ ((aligned(8))); -#define PSW32_MASK_PER 0x40000000UL -#define PSW32_MASK_DAT 0x04000000UL -#define PSW32_MASK_IO 0x02000000UL -#define PSW32_MASK_EXT 0x01000000UL -#define PSW32_MASK_KEY 0x00F00000UL -#define PSW32_MASK_MCHECK 0x00040000UL -#define PSW32_MASK_WAIT 0x00020000UL -#define PSW32_MASK_PSTATE 0x00010000UL -#define PSW32_MASK_ASC 0x0000C000UL -#define PSW32_MASK_CC 0x00003000UL -#define PSW32_MASK_PM 0x00000f00UL - -#define PSW32_ADDR_AMODE31 0x80000000UL -#define PSW32_ADDR_INSN 0x7FFFFFFFUL - -#define PSW32_BASE_BITS 0x00080000UL - -#define PSW32_ASC_PRIMARY 0x00000000UL -#define PSW32_ASC_ACCREG 0x00004000UL -#define PSW32_ASC_SECONDARY 0x00008000UL -#define PSW32_ASC_HOME 0x0000C000UL - -#define PSW32_USER_BITS (PSW32_BASE_BITS | PSW32_MASK_DAT | PSW32_ASC_HOME | \ - PSW32_MASK_IO | PSW32_MASK_EXT | PSW32_MASK_MCHECK | \ - PSW32_MASK_PSTATE) - -#define PSW32_MASK_MERGE(CURRENT,NEW) \ - (((CURRENT) & ~(PSW32_MASK_CC|PSW32_MASK_PM)) | \ - ((NEW) & (PSW32_MASK_CC|PSW32_MASK_PM))) - - typedef struct { _psw_t32 psw; diff --git a/arch/s390/kernel/compat_signal.c b/arch/s390/kernel/compat_signal.c index 8d17b2ab6f21..887a9881d0d0 100644 --- a/arch/s390/kernel/compat_signal.c +++ b/arch/s390/kernel/compat_signal.c @@ -298,7 +298,7 @@ static int save_sigregs32(struct pt_regs *regs, _sigregs32 __user *sregs) _s390_regs_common32 regs32; int err, i; - regs32.psw.mask = PSW32_MASK_MERGE(PSW32_USER_BITS, + regs32.psw.mask = PSW32_MASK_MERGE(psw32_user_bits, (__u32)(regs->psw.mask >> 32)); regs32.psw.addr = PSW32_ADDR_AMODE31 | (__u32) regs->psw.addr; for (i = 0; i < NUM_GPRS; i++) diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c index 9e9972e8a52b..2c91226e1d40 100644 --- a/arch/s390/kernel/ipl.c +++ b/arch/s390/kernel/ipl.c @@ -1016,12 +1016,12 @@ void s390_reset_system(void) __ctl_clear_bit(0,28); /* Set new machine check handler */ - S390_lowcore.mcck_new_psw.mask = PSW_KERNEL_BITS & ~PSW_MASK_MCHECK; + S390_lowcore.mcck_new_psw.mask = psw_kernel_bits & ~PSW_MASK_MCHECK; S390_lowcore.mcck_new_psw.addr = PSW_ADDR_AMODE | (unsigned long) &reset_mcck_handler; /* Set new program check handler */ - S390_lowcore.program_new_psw.mask = PSW_KERNEL_BITS & ~PSW_MASK_MCHECK; + S390_lowcore.program_new_psw.mask = psw_kernel_bits & ~PSW_MASK_MCHECK; S390_lowcore.program_new_psw.addr = PSW_ADDR_AMODE | (unsigned long) &reset_pgm_handler; diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c index 6603fbb41d07..5acfac654f9d 100644 --- a/arch/s390/kernel/process.c +++ b/arch/s390/kernel/process.c @@ -144,7 +144,7 @@ static void default_idle(void) trace_hardirqs_on(); /* Wait for external, I/O or machine check interrupt. */ - __load_psw_mask(PSW_KERNEL_BITS | PSW_MASK_WAIT | + __load_psw_mask(psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_IO | PSW_MASK_EXT); } @@ -190,7 +190,7 @@ int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags) struct pt_regs regs; memset(®s, 0, sizeof(regs)); - regs.psw.mask = PSW_KERNEL_BITS | PSW_MASK_IO | PSW_MASK_EXT; + regs.psw.mask = psw_kernel_bits | PSW_MASK_IO | PSW_MASK_EXT; regs.psw.addr = (unsigned long) kernel_thread_starter | PSW_ADDR_AMODE; regs.gprs[9] = (unsigned long) fn; regs.gprs[10] = (unsigned long) arg; diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c index 29fde70090fe..2a8f0872ea8b 100644 --- a/arch/s390/kernel/ptrace.c +++ b/arch/s390/kernel/ptrace.c @@ -230,9 +230,9 @@ poke_user(struct task_struct *child, addr_t addr, addr_t data) */ if (addr == (addr_t) &dummy->regs.psw.mask && #ifdef CONFIG_COMPAT - data != PSW_MASK_MERGE(PSW_USER32_BITS, data) && + data != PSW_MASK_MERGE(psw_user32_bits, data) && #endif - data != PSW_MASK_MERGE(PSW_USER_BITS, data)) + data != PSW_MASK_MERGE(psw_user_bits, data)) /* Invalid psw mask. */ return -EINVAL; #ifndef CONFIG_64BIT @@ -393,7 +393,7 @@ peek_user_emu31(struct task_struct *child, addr_t addr, addr_t data) if (addr == (addr_t) &dummy32->regs.psw.mask) { /* Fake a 31 bit psw mask. */ tmp = (__u32)(task_pt_regs(child)->psw.mask >> 32); - tmp = PSW32_MASK_MERGE(PSW32_USER_BITS, tmp); + tmp = PSW32_MASK_MERGE(psw32_user_bits, tmp); } else if (addr == (addr_t) &dummy32->regs.psw.addr) { /* Fake a 31 bit psw address. */ tmp = (__u32) task_pt_regs(child)->psw.addr | @@ -468,11 +468,11 @@ poke_user_emu31(struct task_struct *child, addr_t addr, addr_t data) */ if (addr == (addr_t) &dummy32->regs.psw.mask) { /* Build a 64 bit psw mask from 31 bit mask. */ - if (tmp != PSW32_MASK_MERGE(PSW32_USER_BITS, tmp)) + if (tmp != PSW32_MASK_MERGE(psw32_user_bits, tmp)) /* Invalid psw mask. */ return -EINVAL; task_pt_regs(child)->psw.mask = - PSW_MASK_MERGE(PSW_USER32_BITS, (__u64) tmp << 32); + PSW_MASK_MERGE(psw_user32_bits, (__u64) tmp << 32); } else if (addr == (addr_t) &dummy32->regs.psw.addr) { /* Build a 64 bit psw address from 31 bit address. */ task_pt_regs(child)->psw.addr = diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index 25bf7277d311..b1b9a931237d 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -50,6 +50,13 @@ #include #include #include +#include + +long psw_kernel_bits = (PSW_BASE_BITS | PSW_MASK_DAT | PSW_ASC_PRIMARY | + PSW_MASK_MCHECK | PSW_DEFAULT_KEY); +long psw_user_bits = (PSW_BASE_BITS | PSW_MASK_DAT | PSW_ASC_HOME | + PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK | + PSW_MASK_PSTATE | PSW_DEFAULT_KEY); /* * User copy operations. @@ -383,6 +390,84 @@ static int __init early_parse_ipldelay(char *p) } early_param("ipldelay", early_parse_ipldelay); +#ifdef CONFIG_S390_SWITCH_AMODE +unsigned int switch_amode = 0; +EXPORT_SYMBOL_GPL(switch_amode); + +static inline void set_amode_and_uaccess(unsigned long user_amode, + unsigned long user32_amode) +{ + psw_user_bits = PSW_BASE_BITS | PSW_MASK_DAT | user_amode | + PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK | + PSW_MASK_PSTATE | PSW_DEFAULT_KEY; +#ifdef CONFIG_COMPAT + psw_user32_bits = PSW_BASE32_BITS | PSW_MASK_DAT | user_amode | + PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK | + PSW_MASK_PSTATE | PSW_DEFAULT_KEY; + psw32_user_bits = PSW32_BASE_BITS | PSW32_MASK_DAT | user32_amode | + PSW32_MASK_IO | PSW32_MASK_EXT | PSW32_MASK_MCHECK | + PSW32_MASK_PSTATE; +#endif + psw_kernel_bits = PSW_BASE_BITS | PSW_MASK_DAT | PSW_ASC_HOME | + PSW_MASK_MCHECK | PSW_DEFAULT_KEY; + + if (MACHINE_HAS_MVCOS) { + printk("mvcos available.\n"); + memcpy(&uaccess, &uaccess_mvcos_switch, sizeof(uaccess)); + } else { + printk("mvcos not available.\n"); + memcpy(&uaccess, &uaccess_pt, sizeof(uaccess)); + } +} + +/* + * Switch kernel/user addressing modes? + */ +static int __init early_parse_switch_amode(char *p) +{ + switch_amode = 1; + return 0; +} +early_param("switch_amode", early_parse_switch_amode); + +#else /* CONFIG_S390_SWITCH_AMODE */ +static inline void set_amode_and_uaccess(unsigned long user_amode, + unsigned long user32_amode) +{ +} +#endif /* CONFIG_S390_SWITCH_AMODE */ + +#ifdef CONFIG_S390_EXEC_PROTECT +unsigned int s390_noexec = 0; +EXPORT_SYMBOL_GPL(s390_noexec); + +/* + * Enable execute protection? + */ +static int __init early_parse_noexec(char *p) +{ + if (!strncmp(p, "off", 3)) + return 0; + switch_amode = 1; + s390_noexec = 1; + return 0; +} +early_param("noexec", early_parse_noexec); +#endif /* CONFIG_S390_EXEC_PROTECT */ + +static void setup_addressing_mode(void) +{ + if (s390_noexec) { + printk("S390 execute protection active, "); + set_amode_and_uaccess(PSW_ASC_SECONDARY, PSW32_ASC_SECONDARY); + return; + } + if (switch_amode) { + printk("S390 address spaces switched, "); + set_amode_and_uaccess(PSW_ASC_PRIMARY, PSW32_ASC_PRIMARY); + } +} + static void __init setup_lowcore(void) { @@ -399,19 +484,21 @@ setup_lowcore(void) lc->restart_psw.mask = PSW_BASE_BITS | PSW_DEFAULT_KEY; lc->restart_psw.addr = PSW_ADDR_AMODE | (unsigned long) restart_int_handler; - lc->external_new_psw.mask = PSW_KERNEL_BITS; + if (switch_amode) + lc->restart_psw.mask |= PSW_ASC_HOME; + lc->external_new_psw.mask = psw_kernel_bits; lc->external_new_psw.addr = PSW_ADDR_AMODE | (unsigned long) ext_int_handler; - lc->svc_new_psw.mask = PSW_KERNEL_BITS | PSW_MASK_IO | PSW_MASK_EXT; + lc->svc_new_psw.mask = psw_kernel_bits | PSW_MASK_IO | PSW_MASK_EXT; lc->svc_new_psw.addr = PSW_ADDR_AMODE | (unsigned long) system_call; - lc->program_new_psw.mask = PSW_KERNEL_BITS; + lc->program_new_psw.mask = psw_kernel_bits; lc->program_new_psw.addr = PSW_ADDR_AMODE | (unsigned long)pgm_check_handler; lc->mcck_new_psw.mask = - PSW_KERNEL_BITS & ~PSW_MASK_MCHECK & ~PSW_MASK_DAT; + psw_kernel_bits & ~PSW_MASK_MCHECK & ~PSW_MASK_DAT; lc->mcck_new_psw.addr = PSW_ADDR_AMODE | (unsigned long) mcck_int_handler; - lc->io_new_psw.mask = PSW_KERNEL_BITS; + lc->io_new_psw.mask = psw_kernel_bits; lc->io_new_psw.addr = PSW_ADDR_AMODE | (unsigned long) io_int_handler; lc->ipl_device = S390_lowcore.ipl_device; lc->jiffy_timer = -1LL; @@ -645,6 +732,7 @@ setup_arch(char **cmdline_p) parse_early_param(); setup_memory_end(); + setup_addressing_mode(); setup_memory(); setup_resources(); setup_lowcore(); diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c index 4c8a7954ef48..554f9cf7499c 100644 --- a/arch/s390/kernel/signal.c +++ b/arch/s390/kernel/signal.c @@ -119,7 +119,7 @@ static int save_sigregs(struct pt_regs *regs, _sigregs __user *sregs) /* Copy a 'clean' PSW mask to the user to avoid leaking information about whether PER is currently on. */ - user_sregs.regs.psw.mask = PSW_MASK_MERGE(PSW_USER_BITS, regs->psw.mask); + user_sregs.regs.psw.mask = PSW_MASK_MERGE(psw_user_bits, regs->psw.mask); user_sregs.regs.psw.addr = regs->psw.addr; memcpy(&user_sregs.regs.gprs, ®s->gprs, sizeof(sregs->regs.gprs)); memcpy(&user_sregs.regs.acrs, current->thread.acrs, diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index 3cb7e1032072..cb155d9fd749 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -244,7 +244,7 @@ static inline void do_wait_for_stop(void) void smp_send_stop(void) { /* Disable all interrupts/machine checks */ - __load_psw_mask(PSW_KERNEL_BITS & ~PSW_MASK_MCHECK); + __load_psw_mask(psw_kernel_bits & ~PSW_MASK_MCHECK); /* write magic number to zero page (absolute 0) */ lowcore_ptr[smp_processor_id()]->panic_magic = __PANIC_MAGIC; diff --git a/arch/s390/lib/uaccess_mvcos.c b/arch/s390/lib/uaccess_mvcos.c index 78c48f88f5f7..6d8772339d76 100644 --- a/arch/s390/lib/uaccess_mvcos.c +++ b/arch/s390/lib/uaccess_mvcos.c @@ -162,6 +162,44 @@ static size_t clear_user_mvcos(size_t size, void __user *to) return size; } +static size_t strnlen_user_mvcos(size_t count, const char __user *src) +{ + char buf[256]; + int rc; + size_t done, len, len_str; + + done = 0; + do { + len = min(count - done, (size_t) 256); + rc = uaccess.copy_from_user(len, src + done, buf); + if (unlikely(rc == len)) + return 0; + len -= rc; + len_str = strnlen(buf, len); + done += len_str; + } while ((len_str == len) && (done < count)); + return done + 1; +} + +static size_t strncpy_from_user_mvcos(size_t count, const char __user *src, + char *dst) +{ + int rc; + size_t done, len, len_str; + + done = 0; + do { + len = min(count - done, (size_t) 4096); + rc = uaccess.copy_from_user(len, src + done, dst); + if (unlikely(rc == len)) + return -EFAULT; + len -= rc; + len_str = strnlen(dst, len); + done += len_str; + } while ((len_str == len) && (done < count)); + return done; +} + struct uaccess_ops uaccess_mvcos = { .copy_from_user = copy_from_user_mvcos_check, .copy_from_user_small = copy_from_user_std, @@ -174,3 +212,18 @@ struct uaccess_ops uaccess_mvcos = { .futex_atomic_op = futex_atomic_op_std, .futex_atomic_cmpxchg = futex_atomic_cmpxchg_std, }; + +#ifdef CONFIG_S390_SWITCH_AMODE +struct uaccess_ops uaccess_mvcos_switch = { + .copy_from_user = copy_from_user_mvcos, + .copy_from_user_small = copy_from_user_mvcos, + .copy_to_user = copy_to_user_mvcos, + .copy_to_user_small = copy_to_user_mvcos, + .copy_in_user = copy_in_user_mvcos, + .clear_user = clear_user_mvcos, + .strnlen_user = strnlen_user_mvcos, + .strncpy_from_user = strncpy_from_user_mvcos, + .futex_atomic_op = futex_atomic_op_pt, + .futex_atomic_cmpxchg = futex_atomic_cmpxchg_pt, +}; +#endif diff --git a/arch/s390/lib/uaccess_pt.c b/arch/s390/lib/uaccess_pt.c index 24ead559c7bb..637192fa7c9a 100644 --- a/arch/s390/lib/uaccess_pt.c +++ b/arch/s390/lib/uaccess_pt.c @@ -1,7 +1,8 @@ /* * arch/s390/lib/uaccess_pt.c * - * User access functions based on page table walks. + * User access functions based on page table walks for enhanced + * system layout without hardware support. * * Copyright IBM Corp. 2006 * Author(s): Gerald Schaefer (gerald.schaefer@de.ibm.com) @@ -134,6 +135,49 @@ fault: goto retry; } +/* + * Do DAT for user address by page table walk, return kernel address. + * This function needs to be called with current->mm->page_table_lock held. + */ +static inline unsigned long __dat_user_addr(unsigned long uaddr) +{ + struct mm_struct *mm = current->mm; + unsigned long pfn, ret; + pgd_t *pgd; + pmd_t *pmd; + pte_t *pte; + int rc; + + ret = 0; +retry: + pgd = pgd_offset(mm, uaddr); + if (pgd_none(*pgd) || unlikely(pgd_bad(*pgd))) + goto fault; + + pmd = pmd_offset(pgd, uaddr); + if (pmd_none(*pmd) || unlikely(pmd_bad(*pmd))) + goto fault; + + pte = pte_offset_map(pmd, uaddr); + if (!pte || !pte_present(*pte)) + goto fault; + + pfn = pte_pfn(*pte); + if (!pfn_valid(pfn)) + goto out; + + ret = (pfn << PAGE_SHIFT) + (uaddr & (PAGE_SIZE - 1)); +out: + return ret; +fault: + spin_unlock(&mm->page_table_lock); + rc = __handle_fault(mm, uaddr, 0); + spin_lock(&mm->page_table_lock); + if (rc) + goto out; + goto retry; +} + size_t copy_from_user_pt(size_t n, const void __user *from, void *to) { size_t rc; @@ -156,3 +200,277 @@ size_t copy_to_user_pt(size_t n, void __user *to, const void *from) } return __user_copy_pt((unsigned long) to, (void *) from, n, 1); } + +static size_t clear_user_pt(size_t n, void __user *to) +{ + long done, size, ret; + + if (segment_eq(get_fs(), KERNEL_DS)) { + memset((void __kernel __force *) to, 0, n); + return 0; + } + done = 0; + do { + if (n - done > PAGE_SIZE) + size = PAGE_SIZE; + else + size = n - done; + ret = __user_copy_pt((unsigned long) to + done, + &empty_zero_page, size, 1); + done += size; + if (ret) + return ret + n - done; + } while (done < n); + return 0; +} + +static size_t strnlen_user_pt(size_t count, const char __user *src) +{ + char *addr; + unsigned long uaddr = (unsigned long) src; + struct mm_struct *mm = current->mm; + unsigned long offset, pfn, done, len; + pgd_t *pgd; + pmd_t *pmd; + pte_t *pte; + size_t len_str; + + if (segment_eq(get_fs(), KERNEL_DS)) + return strnlen((const char __kernel __force *) src, count) + 1; + done = 0; +retry: + spin_lock(&mm->page_table_lock); + do { + pgd = pgd_offset(mm, uaddr); + if (pgd_none(*pgd) || unlikely(pgd_bad(*pgd))) + goto fault; + + pmd = pmd_offset(pgd, uaddr); + if (pmd_none(*pmd) || unlikely(pmd_bad(*pmd))) + goto fault; + + pte = pte_offset_map(pmd, uaddr); + if (!pte || !pte_present(*pte)) + goto fault; + + pfn = pte_pfn(*pte); + if (!pfn_valid(pfn)) { + done = -1; + goto out; + } + + offset = uaddr & (PAGE_SIZE-1); + addr = (char *)(pfn << PAGE_SHIFT) + offset; + len = min(count - done, PAGE_SIZE - offset); + len_str = strnlen(addr, len); + done += len_str; + uaddr += len_str; + } while ((len_str == len) && (done < count)); +out: + spin_unlock(&mm->page_table_lock); + return done + 1; +fault: + spin_unlock(&mm->page_table_lock); + if (__handle_fault(mm, uaddr, 0)) { + return 0; + } + goto retry; +} + +static size_t strncpy_from_user_pt(size_t count, const char __user *src, + char *dst) +{ + size_t n = strnlen_user_pt(count, src); + + if (!n) + return -EFAULT; + if (n > count) + n = count; + if (segment_eq(get_fs(), KERNEL_DS)) { + memcpy(dst, (const char __kernel __force *) src, n); + if (dst[n-1] == '\0') + return n-1; + else + return n; + } + if (__user_copy_pt((unsigned long) src, dst, n, 0)) + return -EFAULT; + if (dst[n-1] == '\0') + return n-1; + else + return n; +} + +static size_t copy_in_user_pt(size_t n, void __user *to, + const void __user *from) +{ + struct mm_struct *mm = current->mm; + unsigned long offset_from, offset_to, offset_max, pfn_from, pfn_to, + uaddr, done, size; + unsigned long uaddr_from = (unsigned long) from; + unsigned long uaddr_to = (unsigned long) to; + pgd_t *pgd_from, *pgd_to; + pmd_t *pmd_from, *pmd_to; + pte_t *pte_from, *pte_to; + int write_user; + + done = 0; +retry: + spin_lock(&mm->page_table_lock); + do { + pgd_from = pgd_offset(mm, uaddr_from); + if (pgd_none(*pgd_from) || unlikely(pgd_bad(*pgd_from))) { + uaddr = uaddr_from; + write_user = 0; + goto fault; + } + pgd_to = pgd_offset(mm, uaddr_to); + if (pgd_none(*pgd_to) || unlikely(pgd_bad(*pgd_to))) { + uaddr = uaddr_to; + write_user = 1; + goto fault; + } + + pmd_from = pmd_offset(pgd_from, uaddr_from); + if (pmd_none(*pmd_from) || unlikely(pmd_bad(*pmd_from))) { + uaddr = uaddr_from; + write_user = 0; + goto fault; + } + pmd_to = pmd_offset(pgd_to, uaddr_to); + if (pmd_none(*pmd_to) || unlikely(pmd_bad(*pmd_to))) { + uaddr = uaddr_to; + write_user = 1; + goto fault; + } + + pte_from = pte_offset_map(pmd_from, uaddr_from); + if (!pte_from || !pte_present(*pte_from)) { + uaddr = uaddr_from; + write_user = 0; + goto fault; + } + pte_to = pte_offset_map(pmd_to, uaddr_to); + if (!pte_to || !pte_present(*pte_to) || !pte_write(*pte_to)) { + uaddr = uaddr_to; + write_user = 1; + goto fault; + } + + pfn_from = pte_pfn(*pte_from); + if (!pfn_valid(pfn_from)) + goto out; + pfn_to = pte_pfn(*pte_to); + if (!pfn_valid(pfn_to)) + goto out; + + offset_from = uaddr_from & (PAGE_SIZE-1); + offset_to = uaddr_from & (PAGE_SIZE-1); + offset_max = max(offset_from, offset_to); + size = min(n - done, PAGE_SIZE - offset_max); + + memcpy((void *)(pfn_to << PAGE_SHIFT) + offset_to, + (void *)(pfn_from << PAGE_SHIFT) + offset_from, size); + done += size; + uaddr_from += size; + uaddr_to += size; + } while (done < n); +out: + spin_unlock(&mm->page_table_lock); + return n - done; +fault: + spin_unlock(&mm->page_table_lock); + if (__handle_fault(mm, uaddr, write_user)) + return n - done; + goto retry; +} + +#define __futex_atomic_op(insn, ret, oldval, newval, uaddr, oparg) \ + asm volatile("0: l %1,0(%6)\n" \ + "1: " insn \ + "2: cs %1,%2,0(%6)\n" \ + "3: jl 1b\n" \ + " lhi %0,0\n" \ + "4:\n" \ + EX_TABLE(0b,4b) EX_TABLE(2b,4b) EX_TABLE(3b,4b) \ + : "=d" (ret), "=&d" (oldval), "=&d" (newval), \ + "=m" (*uaddr) \ + : "0" (-EFAULT), "d" (oparg), "a" (uaddr), \ + "m" (*uaddr) : "cc" ); + +int futex_atomic_op_pt(int op, int __user *uaddr, int oparg, int *old) +{ + int oldval = 0, newval, ret; + + spin_lock(¤t->mm->page_table_lock); + uaddr = (int __user *) __dat_user_addr((unsigned long) uaddr); + if (!uaddr) { + spin_unlock(¤t->mm->page_table_lock); + return -EFAULT; + } + get_page(virt_to_page(uaddr)); + spin_unlock(¤t->mm->page_table_lock); + switch (op) { + case FUTEX_OP_SET: + __futex_atomic_op("lr %2,%5\n", + ret, oldval, newval, uaddr, oparg); + break; + case FUTEX_OP_ADD: + __futex_atomic_op("lr %2,%1\nar %2,%5\n", + ret, oldval, newval, uaddr, oparg); + break; + case FUTEX_OP_OR: + __futex_atomic_op("lr %2,%1\nor %2,%5\n", + ret, oldval, newval, uaddr, oparg); + break; + case FUTEX_OP_ANDN: + __futex_atomic_op("lr %2,%1\nnr %2,%5\n", + ret, oldval, newval, uaddr, oparg); + break; + case FUTEX_OP_XOR: + __futex_atomic_op("lr %2,%1\nxr %2,%5\n", + ret, oldval, newval, uaddr, oparg); + break; + default: + ret = -ENOSYS; + } + put_page(virt_to_page(uaddr)); + *old = oldval; + return ret; +} + +int futex_atomic_cmpxchg_pt(int __user *uaddr, int oldval, int newval) +{ + int ret; + + spin_lock(¤t->mm->page_table_lock); + uaddr = (int __user *) __dat_user_addr((unsigned long) uaddr); + if (!uaddr) { + spin_unlock(¤t->mm->page_table_lock); + return -EFAULT; + } + get_page(virt_to_page(uaddr)); + spin_unlock(¤t->mm->page_table_lock); + asm volatile(" cs %1,%4,0(%5)\n" + "0: lr %0,%1\n" + "1:\n" + EX_TABLE(0b,1b) + : "=d" (ret), "+d" (oldval), "=m" (*uaddr) + : "0" (-EFAULT), "d" (newval), "a" (uaddr), "m" (*uaddr) + : "cc", "memory" ); + put_page(virt_to_page(uaddr)); + return ret; +} + +struct uaccess_ops uaccess_pt = { + .copy_from_user = copy_from_user_pt, + .copy_from_user_small = copy_from_user_pt, + .copy_to_user = copy_to_user_pt, + .copy_to_user_small = copy_to_user_pt, + .copy_in_user = copy_in_user_pt, + .clear_user = clear_user_pt, + .strnlen_user = strnlen_user_pt, + .strncpy_from_user = strncpy_from_user_pt, + .futex_atomic_op = futex_atomic_op_pt, + .futex_atomic_cmpxchg = futex_atomic_cmpxchg_pt, +}; diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c index 3382e29f34a4..9ff143e87746 100644 --- a/arch/s390/mm/fault.c +++ b/arch/s390/mm/fault.c @@ -137,7 +137,9 @@ static int __check_access_register(struct pt_regs *regs, int error_code) /* * Check which address space the address belongs to. - * Returns 1 for user space and 0 for kernel space. + * May return 1 or 2 for user space and 0 for kernel space. + * Returns 2 for user space in primary addressing mode with + * CONFIG_S390_EXEC_PROTECT on and kernel parameter noexec=on. */ static inline int check_user_space(struct pt_regs *regs, int error_code) { @@ -154,7 +156,7 @@ static inline int check_user_space(struct pt_regs *regs, int error_code) return __check_access_register(regs, error_code); if (descriptor == 2) return current->thread.mm_segment.ar4; - return descriptor != 0; + return ((descriptor != 0) ^ (switch_amode)) << s390_noexec; } /* @@ -183,6 +185,77 @@ static void do_sigsegv(struct pt_regs *regs, unsigned long error_code, force_sig_info(SIGSEGV, &si, current); } +#ifdef CONFIG_S390_EXEC_PROTECT +extern long sys_sigreturn(struct pt_regs *regs); +extern long sys_rt_sigreturn(struct pt_regs *regs); +extern long sys32_sigreturn(struct pt_regs *regs); +extern long sys32_rt_sigreturn(struct pt_regs *regs); + +static inline void do_sigreturn(struct mm_struct *mm, struct pt_regs *regs, + int rt) +{ + up_read(&mm->mmap_sem); + clear_tsk_thread_flag(current, TIF_SINGLE_STEP); +#ifdef CONFIG_COMPAT + if (test_tsk_thread_flag(current, TIF_31BIT)) { + if (rt) + sys32_rt_sigreturn(regs); + else + sys32_sigreturn(regs); + return; + } +#endif /* CONFIG_COMPAT */ + if (rt) + sys_rt_sigreturn(regs); + else + sys_sigreturn(regs); + return; +} + +static int signal_return(struct mm_struct *mm, struct pt_regs *regs, + unsigned long address, unsigned long error_code) +{ + pgd_t *pgd; + pmd_t *pmd; + pte_t *pte; + u16 *instruction; + unsigned long pfn, uaddr = regs->psw.addr; + + spin_lock(&mm->page_table_lock); + pgd = pgd_offset(mm, uaddr); + if (pgd_none(*pgd) || unlikely(pgd_bad(*pgd))) + goto out_fault; + pmd = pmd_offset(pgd, uaddr); + if (pmd_none(*pmd) || unlikely(pmd_bad(*pmd))) + goto out_fault; + pte = pte_offset_map(pmd_offset(pgd_offset(mm, uaddr), uaddr), uaddr); + if (!pte || !pte_present(*pte)) + goto out_fault; + pfn = pte_pfn(*pte); + if (!pfn_valid(pfn)) + goto out_fault; + spin_unlock(&mm->page_table_lock); + + instruction = (u16 *) ((pfn << PAGE_SHIFT) + (uaddr & (PAGE_SIZE-1))); + if (*instruction == 0x0a77) + do_sigreturn(mm, regs, 0); + else if (*instruction == 0x0aad) + do_sigreturn(mm, regs, 1); + else { + printk("- XXX - do_exception: task = %s, primary, NO EXEC " + "-> SIGSEGV\n", current->comm); + up_read(&mm->mmap_sem); + current->thread.prot_addr = address; + current->thread.trap_no = error_code; + do_sigsegv(regs, error_code, SEGV_MAPERR, address); + } + return 0; +out_fault: + spin_unlock(&mm->page_table_lock); + return -EFAULT; +} +#endif /* CONFIG_S390_EXEC_PROTECT */ + /* * This routine handles page faults. It determines the address, * and the problem, and then passes it off to one of the appropriate @@ -260,6 +333,17 @@ do_exception(struct pt_regs *regs, unsigned long error_code, int is_protection) vma = find_vma(mm, address); if (!vma) goto bad_area; + +#ifdef CONFIG_S390_EXEC_PROTECT + if (unlikely((user_address == 2) && !(vma->vm_flags & VM_EXEC))) + if (!signal_return(mm, regs, address, error_code)) + /* + * signal_return() has done an up_read(&mm->mmap_sem) + * if it returns 0. + */ + return; +#endif + if (vma->vm_start <= address) goto good_area; if (!(vma->vm_flags & VM_GROWSDOWN)) diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c index 0e7e9acab9e1..162a338a5575 100644 --- a/arch/s390/mm/init.c +++ b/arch/s390/mm/init.c @@ -104,7 +104,7 @@ static void __init setup_ro_region(void) pmd = pmd_offset(pgd, address); pte = pte_offset_kernel(pmd, address); new_pte = mk_pte_phys(address, __pgprot(_PAGE_RO)); - set_pte(pte, new_pte); + *pte = new_pte; } } @@ -124,11 +124,11 @@ void __init paging_init(void) #ifdef CONFIG_64BIT pgdir_k = (__pa(swapper_pg_dir) & PAGE_MASK) | _KERN_REGION_TABLE; for (i = 0; i < PTRS_PER_PGD; i++) - pgd_clear(pg_dir + i); + pgd_clear_kernel(pg_dir + i); #else pgdir_k = (__pa(swapper_pg_dir) & PAGE_MASK) | _KERNSEG_TABLE; for (i = 0; i < PTRS_PER_PGD; i++) - pmd_clear((pmd_t *)(pg_dir + i)); + pmd_clear_kernel((pmd_t *)(pg_dir + i)); #endif vmem_map_init(); setup_ro_region(); diff --git a/arch/s390/mm/vmem.c b/arch/s390/mm/vmem.c index cd3d93e8c211..92a565190028 100644 --- a/arch/s390/mm/vmem.c +++ b/arch/s390/mm/vmem.c @@ -82,7 +82,7 @@ static inline pmd_t *vmem_pmd_alloc(void) if (!pmd) return NULL; for (i = 0; i < PTRS_PER_PMD; i++) - pmd_clear(pmd + i); + pmd_clear_kernel(pmd + i); return pmd; } @@ -97,7 +97,7 @@ static inline pte_t *vmem_pte_alloc(void) return NULL; pte_val(empty_pte) = _PAGE_TYPE_EMPTY; for (i = 0; i < PTRS_PER_PTE; i++) - set_pte(pte + i, empty_pte); + pte[i] = empty_pte; return pte; } @@ -119,7 +119,7 @@ static int vmem_add_range(unsigned long start, unsigned long size) pm_dir = vmem_pmd_alloc(); if (!pm_dir) goto out; - pgd_populate(&init_mm, pg_dir, pm_dir); + pgd_populate_kernel(&init_mm, pg_dir, pm_dir); } pm_dir = pmd_offset(pg_dir, address); @@ -132,7 +132,7 @@ static int vmem_add_range(unsigned long start, unsigned long size) pt_dir = pte_offset_kernel(pm_dir, address); pte = pfn_pte(address >> PAGE_SHIFT, PAGE_KERNEL); - set_pte(pt_dir, pte); + *pt_dir = pte; } ret = 0; out: @@ -161,7 +161,7 @@ static void vmem_remove_range(unsigned long start, unsigned long size) if (pmd_none(*pm_dir)) continue; pt_dir = pte_offset_kernel(pm_dir, address); - set_pte(pt_dir, pte); + *pt_dir = pte; } flush_tlb_kernel_range(start, start + size); } @@ -191,7 +191,7 @@ static int vmem_add_mem_map(unsigned long start, unsigned long size) pm_dir = vmem_pmd_alloc(); if (!pm_dir) goto out; - pgd_populate(&init_mm, pg_dir, pm_dir); + pgd_populate_kernel(&init_mm, pg_dir, pm_dir); } pm_dir = pmd_offset(pg_dir, address); @@ -210,7 +210,7 @@ static int vmem_add_mem_map(unsigned long start, unsigned long size) if (!new_page) goto out; pte = pfn_pte(new_page >> PAGE_SHIFT, PAGE_KERNEL); - set_pte(pt_dir, pte); + *pt_dir = pte; } } ret = 0; -- cgit v1.2.3 From d54853ef8cb17296ac7bce9c77430fb7c80532d0 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Mon, 5 Feb 2007 21:18:19 +0100 Subject: [S390] ETR support. This patch adds support for clock synchronization to an external time reference (ETR). The external time reference sends an oscillator signal and a synchronization signal every 2^20 microseconds to keep the TOD clocks of all connected servers in sync. For availability two ETR units can be connected to a machine. If the clock deviates for more than the sync-check tolerance all cpus get a machine check that indicates that the clock is out of sync. For the lovely details how to get the clock back in sync see the code below. Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/s390_ext.c | 8 +- arch/s390/kernel/smp.c | 3 +- arch/s390/kernel/time.c | 1179 ++++++++++++++++++++++++++++++++++++++++--- arch/s390/kernel/vtime.c | 8 +- arch/s390/lib/delay.c | 48 +- 5 files changed, 1160 insertions(+), 86 deletions(-) (limited to 'arch') diff --git a/arch/s390/kernel/s390_ext.c b/arch/s390/kernel/s390_ext.c index bc5beaa8f98e..acf93dba7727 100644 --- a/arch/s390/kernel/s390_ext.c +++ b/arch/s390/kernel/s390_ext.c @@ -125,14 +125,12 @@ void do_extint(struct pt_regs *regs, unsigned short code) * Make sure that the i/o interrupt did not "overtake" * the last HZ timer interrupt. */ - account_ticks(); + account_ticks(S390_lowcore.int_clock); kstat_cpu(smp_processor_id()).irqs[EXTERNAL_INTERRUPT]++; index = ext_hash(code); for (p = ext_int_hash[index]; p; p = p->next) { - if (likely(p->code == code)) { - if (likely(p->handler)) - p->handler(code); - } + if (likely(p->code == code)) + p->handler(code); } irq_exit(); set_irq_regs(old_regs); diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index cb155d9fd749..08f9a4dfb18b 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -457,9 +457,10 @@ int __devinit start_secondary(void *cpuvoid) /* Setup the cpu */ cpu_init(); preempt_disable(); - /* init per CPU timer */ + /* Enable TOD clock interrupts on the secondary cpu. */ init_cpu_timer(); #ifdef CONFIG_VIRT_TIMER + /* Enable cpu timer interrupts on the secondary cpu. */ init_cpu_vtimer(); #endif /* Enable pfault pseudo page faults on this cpu. */ diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c index 5d4a190fa307..39a72d3cb89a 100644 --- a/arch/s390/kernel/time.c +++ b/arch/s390/kernel/time.c @@ -37,11 +37,15 @@ #include #include #include +#include /* change this if you have some constant time drift */ #define USECS_PER_JIFFY ((unsigned long) 1000000/HZ) #define CLK_TICKS_PER_JIFFY ((unsigned long) USECS_PER_JIFFY << 12) +/* The value of the TOD clock for 1.1.1970. */ +#define TOD_UNIX_EPOCH 0x7d91048bca000000ULL + /* * Create a small time difference between the timer interrupts * on the different cpus to avoid lock contention. @@ -51,6 +55,7 @@ #define TICK_SIZE tick static ext_int_info_t ext_int_info_cc; +static ext_int_info_t ext_int_etr_cc; static u64 init_timer_cc; static u64 jiffies_timer_cc; static u64 xtime_cc; @@ -89,29 +94,21 @@ void tod_to_timeval(__u64 todval, struct timespec *xtime) #define s390_do_profile() do { ; } while(0) #endif /* CONFIG_PROFILING */ - /* - * timer_interrupt() needs to keep up the real-time clock, - * as well as call the "do_timer()" routine every clocktick + * Advance the per cpu tick counter up to the time given with the + * "time" argument. The per cpu update consists of accounting + * the virtual cpu time, calling update_process_times and calling + * the profiling hook. If xtime is before time it is advanced as well. */ -void account_ticks(void) +void account_ticks(u64 time) { - __u64 tmp; __u32 ticks; + __u64 tmp; /* Calculate how many ticks have passed. */ - if (S390_lowcore.int_clock < S390_lowcore.jiffy_timer) { - /* - * We have to program the clock comparator even if - * no tick has passed. That happens if e.g. an i/o - * interrupt wakes up an idle processor that has - * switched off its hz timer. - */ - tmp = S390_lowcore.jiffy_timer + CPU_DEVIATION; - asm volatile ("SCKC %0" : : "m" (tmp)); + if (time < S390_lowcore.jiffy_timer) return; - } - tmp = S390_lowcore.int_clock - S390_lowcore.jiffy_timer; + tmp = time - S390_lowcore.jiffy_timer; if (tmp >= 2*CLK_TICKS_PER_JIFFY) { /* more than two ticks ? */ ticks = __div(tmp, CLK_TICKS_PER_JIFFY) + 1; S390_lowcore.jiffy_timer += @@ -124,10 +121,6 @@ void account_ticks(void) S390_lowcore.jiffy_timer += CLK_TICKS_PER_JIFFY; } - /* set clock comparator for next tick */ - tmp = S390_lowcore.jiffy_timer + CPU_DEVIATION; - asm volatile ("SCKC %0" : : "m" (tmp)); - #ifdef CONFIG_SMP /* * Do not rely on the boot cpu to do the calls to do_timer. @@ -210,7 +203,7 @@ static inline void stop_hz_timer(void) if (timer >= jiffies_timer_cc) todval = timer; } - asm volatile ("SCKC %0" : : "m" (todval)); + set_clock_comparator(todval); } /* @@ -223,7 +216,8 @@ static inline void start_hz_timer(void) if (!cpu_isset(smp_processor_id(), nohz_cpu_mask)) return; - account_ticks(); + account_ticks(get_clock()); + set_clock_comparator(S390_lowcore.jiffy_timer + CPU_DEVIATION); cpu_clear(smp_processor_id(), nohz_cpu_mask); } @@ -254,21 +248,56 @@ static void __init nohz_init(void) #endif /* - * Start the clock comparator on the current CPU. + * Set up per cpu jiffy timer and set the clock comparator. + */ +static void setup_jiffy_timer(void) +{ + /* Set up clock comparator to next jiffy. */ + S390_lowcore.jiffy_timer = + jiffies_timer_cc + (jiffies_64 + 1) * CLK_TICKS_PER_JIFFY; + set_clock_comparator(S390_lowcore.jiffy_timer + CPU_DEVIATION); +} + +/* + * Set up lowcore and control register of the current cpu to + * enable TOD clock and clock comparator interrupts. */ void init_cpu_timer(void) { - unsigned long cr0; - __u64 timer; + setup_jiffy_timer(); + + /* Enable clock comparator timer interrupt. */ + __ctl_set_bit(0,11); + + /* Always allow ETR external interrupts, even without an ETR. */ + __ctl_set_bit(0, 4); +} + +static void clock_comparator_interrupt(__u16 code) +{ + /* set clock comparator for next tick */ + set_clock_comparator(S390_lowcore.jiffy_timer + CPU_DEVIATION); +} + +static void etr_reset(void); +static void etr_init(void); +static void etr_ext_handler(__u16); + +/* + * Get the TOD clock running. + */ +static u64 __init reset_tod_clock(void) +{ + u64 time; + + etr_reset(); + if (store_clock(&time) == 0) + return time; + /* TOD clock not running. Set the clock to Unix Epoch. */ + if (set_clock(TOD_UNIX_EPOCH) != 0 || store_clock(&time) != 0) + panic("TOD clock not operational."); - timer = jiffies_timer_cc + jiffies_64 * CLK_TICKS_PER_JIFFY; - S390_lowcore.jiffy_timer = timer + CLK_TICKS_PER_JIFFY; - timer += CLK_TICKS_PER_JIFFY + CPU_DEVIATION; - asm volatile ("SCKC %0" : : "m" (timer)); - /* allow clock comparator timer interrupt */ - __ctl_store(cr0, 0, 0); - cr0 |= 0x800; - __ctl_load(cr0, 0, 0); + return TOD_UNIX_EPOCH; } static cycle_t read_tod_clock(void) @@ -293,48 +322,31 @@ static struct clocksource clocksource_tod = { */ void __init time_init(void) { - __u64 set_time_cc; - int cc; - - /* kick the TOD clock */ - asm volatile( - " stck 0(%2)\n" - " ipm %0\n" - " srl %0,28" - : "=d" (cc), "=m" (init_timer_cc) - : "a" (&init_timer_cc) : "cc"); - switch (cc) { - case 0: /* clock in set state: all is fine */ - break; - case 1: /* clock in non-set state: FIXME */ - printk("time_init: TOD clock in non-set state\n"); - break; - case 2: /* clock in error state: FIXME */ - printk("time_init: TOD clock in error state\n"); - break; - case 3: /* clock in stopped or not-operational state: FIXME */ - printk("time_init: TOD clock stopped/non-operational\n"); - break; - } + init_timer_cc = reset_tod_clock(); + xtime_cc = init_timer_cc + CLK_TICKS_PER_JIFFY; jiffies_timer_cc = init_timer_cc - jiffies_64 * CLK_TICKS_PER_JIFFY; /* set xtime */ - xtime_cc = init_timer_cc + CLK_TICKS_PER_JIFFY; - set_time_cc = init_timer_cc - 0x8126d60e46000000LL + - (0x3c26700LL*1000000*4096); - tod_to_timeval(set_time_cc, &xtime); + tod_to_timeval(init_timer_cc - TOD_UNIX_EPOCH, &xtime); set_normalized_timespec(&wall_to_monotonic, -xtime.tv_sec, -xtime.tv_nsec); /* request the clock comparator external interrupt */ - if (register_early_external_interrupt(0x1004, NULL, + if (register_early_external_interrupt(0x1004, + clock_comparator_interrupt, &ext_int_info_cc) != 0) panic("Couldn't request external interrupt 0x1004"); if (clocksource_register(&clocksource_tod) != 0) panic("Could not register TOD clock source"); - init_cpu_timer(); + /* request the etr external interrupt */ + if (register_early_external_interrupt(0x1406, etr_ext_handler, + &ext_int_etr_cc) != 0) + panic("Couldn't request external interrupt 0x1406"); + + /* Enable TOD clock interrupts on the boot cpu. */ + init_cpu_timer(); #ifdef CONFIG_NO_IDLE_HZ nohz_init(); @@ -343,5 +355,1048 @@ void __init time_init(void) #ifdef CONFIG_VIRT_TIMER vtime_init(); #endif + etr_init(); +} + +/* + * External Time Reference (ETR) code. + */ +static int etr_port0_online; +static int etr_port1_online; + +static int __init early_parse_etr(char *p) +{ + if (strncmp(p, "off", 3) == 0) + etr_port0_online = etr_port1_online = 0; + else if (strncmp(p, "port0", 5) == 0) + etr_port0_online = 1; + else if (strncmp(p, "port1", 5) == 0) + etr_port1_online = 1; + else if (strncmp(p, "on", 2) == 0) + etr_port0_online = etr_port1_online = 1; + return 0; +} +early_param("etr", early_parse_etr); + +enum etr_event { + ETR_EVENT_PORT0_CHANGE, + ETR_EVENT_PORT1_CHANGE, + ETR_EVENT_PORT_ALERT, + ETR_EVENT_SYNC_CHECK, + ETR_EVENT_SWITCH_LOCAL, + ETR_EVENT_UPDATE, +}; + +enum etr_flags { + ETR_FLAG_ENOSYS, + ETR_FLAG_EACCES, + ETR_FLAG_STEAI, +}; + +/* + * Valid bit combinations of the eacr register are (x = don't care): + * e0 e1 dp p0 p1 ea es sl + * 0 0 x 0 0 0 0 0 initial, disabled state + * 0 0 x 0 1 1 0 0 port 1 online + * 0 0 x 1 0 1 0 0 port 0 online + * 0 0 x 1 1 1 0 0 both ports online + * 0 1 x 0 1 1 0 0 port 1 online and usable, ETR or PPS mode + * 0 1 x 0 1 1 0 1 port 1 online, usable and ETR mode + * 0 1 x 0 1 1 1 0 port 1 online, usable, PPS mode, in-sync + * 0 1 x 0 1 1 1 1 port 1 online, usable, ETR mode, in-sync + * 0 1 x 1 1 1 0 0 both ports online, port 1 usable + * 0 1 x 1 1 1 1 0 both ports online, port 1 usable, PPS mode, in-sync + * 0 1 x 1 1 1 1 1 both ports online, port 1 usable, ETR mode, in-sync + * 1 0 x 1 0 1 0 0 port 0 online and usable, ETR or PPS mode + * 1 0 x 1 0 1 0 1 port 0 online, usable and ETR mode + * 1 0 x 1 0 1 1 0 port 0 online, usable, PPS mode, in-sync + * 1 0 x 1 0 1 1 1 port 0 online, usable, ETR mode, in-sync + * 1 0 x 1 1 1 0 0 both ports online, port 0 usable + * 1 0 x 1 1 1 1 0 both ports online, port 0 usable, PPS mode, in-sync + * 1 0 x 1 1 1 1 1 both ports online, port 0 usable, ETR mode, in-sync + * 1 1 x 1 1 1 1 0 both ports online & usable, ETR, in-sync + * 1 1 x 1 1 1 1 1 both ports online & usable, ETR, in-sync + */ +static struct etr_eacr etr_eacr; +static u64 etr_tolec; /* time of last eacr update */ +static unsigned long etr_flags; +static struct etr_aib etr_port0; +static int etr_port0_uptodate; +static struct etr_aib etr_port1; +static int etr_port1_uptodate; +static unsigned long etr_events; +static struct timer_list etr_timer; +static struct tasklet_struct etr_tasklet; +static DEFINE_PER_CPU(atomic_t, etr_sync_word); + +static void etr_timeout(unsigned long dummy); +static void etr_tasklet_fn(unsigned long dummy); + +/* + * The etr get_clock function. It will write the current clock value + * to the clock pointer and return 0 if the clock is in sync with the + * external time source. If the clock mode is local it will return + * -ENOSYS and -EAGAIN if the clock is not in sync with the external + * reference. This function is what ETR is all about.. + */ +int get_sync_clock(unsigned long long *clock) +{ + atomic_t *sw_ptr; + unsigned int sw0, sw1; + + sw_ptr = &get_cpu_var(etr_sync_word); + sw0 = atomic_read(sw_ptr); + *clock = get_clock(); + sw1 = atomic_read(sw_ptr); + put_cpu_var(etr_sync_sync); + if (sw0 == sw1 && (sw0 & 0x80000000U)) + /* Success: time is in sync. */ + return 0; + if (test_bit(ETR_FLAG_ENOSYS, &etr_flags)) + return -ENOSYS; + if (test_bit(ETR_FLAG_EACCES, &etr_flags)) + return -EACCES; + return -EAGAIN; +} +EXPORT_SYMBOL(get_sync_clock); + +/* + * Make get_sync_clock return -EAGAIN. + */ +static void etr_disable_sync_clock(void *dummy) +{ + atomic_t *sw_ptr = &__get_cpu_var(etr_sync_word); + /* + * Clear the in-sync bit 2^31. All get_sync_clock calls will + * fail until the sync bit is turned back on. In addition + * increase the "sequence" counter to avoid the race of an + * etr event and the complete recovery against get_sync_clock. + */ + atomic_clear_mask(0x80000000, sw_ptr); + atomic_inc(sw_ptr); +} + +/* + * Make get_sync_clock return 0 again. + * Needs to be called from a context disabled for preemption. + */ +static void etr_enable_sync_clock(void) +{ + atomic_t *sw_ptr = &__get_cpu_var(etr_sync_word); + atomic_set_mask(0x80000000, sw_ptr); +} + +/* + * Reset ETR attachment. + */ +static void etr_reset(void) +{ + etr_eacr = (struct etr_eacr) { + .e0 = 0, .e1 = 0, ._pad0 = 4, .dp = 0, + .p0 = 0, .p1 = 0, ._pad1 = 0, .ea = 0, + .es = 0, .sl = 0 }; + if (etr_setr(&etr_eacr) == 0) + etr_tolec = get_clock(); + else { + set_bit(ETR_FLAG_ENOSYS, &etr_flags); + if (etr_port0_online || etr_port1_online) { + printk(KERN_WARNING "Running on non ETR capable " + "machine, only local mode available.\n"); + etr_port0_online = etr_port1_online = 0; + } + } +} + +static void etr_init(void) +{ + struct etr_aib aib; + + if (test_bit(ETR_FLAG_ENOSYS, &etr_flags)) + return; + /* Check if this machine has the steai instruction. */ + if (etr_steai(&aib, ETR_STEAI_STEPPING_PORT) == 0) + set_bit(ETR_FLAG_STEAI, &etr_flags); + setup_timer(&etr_timer, etr_timeout, 0UL); + tasklet_init(&etr_tasklet, etr_tasklet_fn, 0); + if (!etr_port0_online && !etr_port1_online) + set_bit(ETR_FLAG_EACCES, &etr_flags); + if (etr_port0_online) { + set_bit(ETR_EVENT_PORT0_CHANGE, &etr_events); + tasklet_hi_schedule(&etr_tasklet); + } + if (etr_port1_online) { + set_bit(ETR_EVENT_PORT1_CHANGE, &etr_events); + tasklet_hi_schedule(&etr_tasklet); + } +} + +/* + * Two sorts of ETR machine checks. The architecture reads: + * "When a machine-check niterruption occurs and if a switch-to-local or + * ETR-sync-check interrupt request is pending but disabled, this pending + * disabled interruption request is indicated and is cleared". + * Which means that we can get etr_switch_to_local events from the machine + * check handler although the interruption condition is disabled. Lovely.. + */ + +/* + * Switch to local machine check. This is called when the last usable + * ETR port goes inactive. After switch to local the clock is not in sync. + */ +void etr_switch_to_local(void) +{ + if (!etr_eacr.sl) + return; + etr_disable_sync_clock(NULL); + set_bit(ETR_EVENT_SWITCH_LOCAL, &etr_events); + tasklet_hi_schedule(&etr_tasklet); +} + +/* + * ETR sync check machine check. This is called when the ETR OTE and the + * local clock OTE are farther apart than the ETR sync check tolerance. + * After a ETR sync check the clock is not in sync. The machine check + * is broadcasted to all cpus at the same time. + */ +void etr_sync_check(void) +{ + if (!etr_eacr.es) + return; + etr_disable_sync_clock(NULL); + set_bit(ETR_EVENT_SYNC_CHECK, &etr_events); + tasklet_hi_schedule(&etr_tasklet); +} + +/* + * ETR external interrupt. There are two causes: + * 1) port state change, check the usability of the port + * 2) port alert, one of the ETR-data-validity bits (v1-v2 bits of the + * sldr-status word) or ETR-data word 1 (edf1) or ETR-data word 3 (edf3) + * or ETR-data word 4 (edf4) has changed. + */ +static void etr_ext_handler(__u16 code) +{ + struct etr_interruption_parameter *intparm = + (struct etr_interruption_parameter *) &S390_lowcore.ext_params; + + if (intparm->pc0) + /* ETR port 0 state change. */ + set_bit(ETR_EVENT_PORT0_CHANGE, &etr_events); + if (intparm->pc1) + /* ETR port 1 state change. */ + set_bit(ETR_EVENT_PORT1_CHANGE, &etr_events); + if (intparm->eai) + /* + * ETR port alert on either port 0, 1 or both. + * Both ports are not up-to-date now. + */ + set_bit(ETR_EVENT_PORT_ALERT, &etr_events); + tasklet_hi_schedule(&etr_tasklet); +} + +static void etr_timeout(unsigned long dummy) +{ + set_bit(ETR_EVENT_UPDATE, &etr_events); + tasklet_hi_schedule(&etr_tasklet); +} + +/* + * Check if the etr mode is pss. + */ +static inline int etr_mode_is_pps(struct etr_eacr eacr) +{ + return eacr.es && !eacr.sl; +} + +/* + * Check if the etr mode is etr. + */ +static inline int etr_mode_is_etr(struct etr_eacr eacr) +{ + return eacr.es && eacr.sl; +} + +/* + * Check if the port can be used for TOD synchronization. + * For PPS mode the port has to receive OTEs. For ETR mode + * the port has to receive OTEs, the ETR stepping bit has to + * be zero and the validity bits for data frame 1, 2, and 3 + * have to be 1. + */ +static int etr_port_valid(struct etr_aib *aib, int port) +{ + unsigned int psc; + + /* Check that this port is receiving OTEs. */ + if (aib->tsp == 0) + return 0; + + psc = port ? aib->esw.psc1 : aib->esw.psc0; + if (psc == etr_lpsc_pps_mode) + return 1; + if (psc == etr_lpsc_operational_step) + return !aib->esw.y && aib->slsw.v1 && + aib->slsw.v2 && aib->slsw.v3; + return 0; +} + +/* + * Check if two ports are on the same network. + */ +static int etr_compare_network(struct etr_aib *aib1, struct etr_aib *aib2) +{ + // FIXME: any other fields we have to compare? + return aib1->edf1.net_id == aib2->edf1.net_id; +} + +/* + * Wrapper for etr_stei that converts physical port states + * to logical port states to be consistent with the output + * of stetr (see etr_psc vs. etr_lpsc). + */ +static void etr_steai_cv(struct etr_aib *aib, unsigned int func) +{ + BUG_ON(etr_steai(aib, func) != 0); + /* Convert port state to logical port state. */ + if (aib->esw.psc0 == 1) + aib->esw.psc0 = 2; + else if (aib->esw.psc0 == 0 && aib->esw.p == 0) + aib->esw.psc0 = 1; + if (aib->esw.psc1 == 1) + aib->esw.psc1 = 2; + else if (aib->esw.psc1 == 0 && aib->esw.p == 1) + aib->esw.psc1 = 1; +} + +/* + * Check if the aib a2 is still connected to the same attachment as + * aib a1, the etv values differ by one and a2 is valid. + */ +static int etr_aib_follows(struct etr_aib *a1, struct etr_aib *a2, int p) +{ + int state_a1, state_a2; + + /* Paranoia check: e0/e1 should better be the same. */ + if (a1->esw.eacr.e0 != a2->esw.eacr.e0 || + a1->esw.eacr.e1 != a2->esw.eacr.e1) + return 0; + + /* Still connected to the same etr ? */ + state_a1 = p ? a1->esw.psc1 : a1->esw.psc0; + state_a2 = p ? a2->esw.psc1 : a2->esw.psc0; + if (state_a1 == etr_lpsc_operational_step) { + if (state_a2 != etr_lpsc_operational_step || + a1->edf1.net_id != a2->edf1.net_id || + a1->edf1.etr_id != a2->edf1.etr_id || + a1->edf1.etr_pn != a2->edf1.etr_pn) + return 0; + } else if (state_a2 != etr_lpsc_pps_mode) + return 0; + + /* The ETV value of a2 needs to be ETV of a1 + 1. */ + if (a1->edf2.etv + 1 != a2->edf2.etv) + return 0; + + if (!etr_port_valid(a2, p)) + return 0; + + return 1; +} + +/* + * The time is "clock". xtime is what we think the time is. + * Adjust the value by a multiple of jiffies and add the delta to ntp. + * "delay" is an approximation how long the synchronization took. If + * the time correction is positive, then "delay" is subtracted from + * the time difference and only the remaining part is passed to ntp. + */ +static void etr_adjust_time(unsigned long long clock, unsigned long long delay) +{ + unsigned long long delta, ticks; + struct timex adjust; + + /* + * We don't have to take the xtime lock because the cpu + * executing etr_adjust_time is running disabled in + * tasklet context and all other cpus are looping in + * etr_sync_cpu_start. + */ + if (clock > xtime_cc) { + /* It is later than we thought. */ + delta = ticks = clock - xtime_cc; + delta = ticks = (delta < delay) ? 0 : delta - delay; + delta -= do_div(ticks, CLK_TICKS_PER_JIFFY); + init_timer_cc = init_timer_cc + delta; + jiffies_timer_cc = jiffies_timer_cc + delta; + xtime_cc = xtime_cc + delta; + adjust.offset = ticks * (1000000 / HZ); + } else { + /* It is earlier than we thought. */ + delta = ticks = xtime_cc - clock; + delta -= do_div(ticks, CLK_TICKS_PER_JIFFY); + init_timer_cc = init_timer_cc - delta; + jiffies_timer_cc = jiffies_timer_cc - delta; + xtime_cc = xtime_cc - delta; + adjust.offset = -ticks * (1000000 / HZ); + } + if (adjust.offset != 0) { + printk(KERN_NOTICE "etr: time adjusted by %li micro-seconds\n", + adjust.offset); + adjust.modes = ADJ_OFFSET_SINGLESHOT; + do_adjtimex(&adjust); + } +} + +static void etr_sync_cpu_start(void *dummy) +{ + int *in_sync = dummy; + + etr_enable_sync_clock(); + /* + * This looks like a busy wait loop but it isn't. etr_sync_cpus + * is called on all other cpus while the TOD clocks is stopped. + * __udelay will stop the cpu on an enabled wait psw until the + * TOD is running again. + */ + while (*in_sync == 0) + __udelay(1); + if (*in_sync != 1) + /* Didn't work. Clear per-cpu in sync bit again. */ + etr_disable_sync_clock(NULL); + /* + * This round of TOD syncing is done. Set the clock comparator + * to the next tick and let the processor continue. + */ + setup_jiffy_timer(); +} + +static void etr_sync_cpu_end(void *dummy) +{ +} + +/* + * Sync the TOD clock using the port refered to by aibp. This port + * has to be enabled and the other port has to be disabled. The + * last eacr update has to be more than 1.6 seconds in the past. + */ +static int etr_sync_clock(struct etr_aib *aib, int port) +{ + struct etr_aib *sync_port; + unsigned long long clock, delay; + int in_sync, follows; + int rc; + + /* Check if the current aib is adjacent to the sync port aib. */ + sync_port = (port == 0) ? &etr_port0 : &etr_port1; + follows = etr_aib_follows(sync_port, aib, port); + memcpy(sync_port, aib, sizeof(*aib)); + if (!follows) + return -EAGAIN; + + /* + * Catch all other cpus and make them wait until we have + * successfully synced the clock. smp_call_function will + * return after all other cpus are in etr_sync_cpu_start. + */ + in_sync = 0; + preempt_disable(); + smp_call_function(etr_sync_cpu_start,&in_sync,0,0); + local_irq_disable(); + etr_enable_sync_clock(); + + /* Set clock to next OTE. */ + __ctl_set_bit(14, 21); + __ctl_set_bit(0, 29); + clock = ((unsigned long long) (aib->edf2.etv + 1)) << 32; + if (set_clock(clock) == 0) { + __udelay(1); /* Wait for the clock to start. */ + __ctl_clear_bit(0, 29); + __ctl_clear_bit(14, 21); + etr_stetr(aib); + /* Adjust Linux timing variables. */ + delay = (unsigned long long) + (aib->edf2.etv - sync_port->edf2.etv) << 32; + etr_adjust_time(clock, delay); + setup_jiffy_timer(); + /* Verify that the clock is properly set. */ + if (!etr_aib_follows(sync_port, aib, port)) { + /* Didn't work. */ + etr_disable_sync_clock(NULL); + in_sync = -EAGAIN; + rc = -EAGAIN; + } else { + in_sync = 1; + rc = 0; + } + } else { + /* Could not set the clock ?!? */ + __ctl_clear_bit(0, 29); + __ctl_clear_bit(14, 21); + etr_disable_sync_clock(NULL); + in_sync = -EAGAIN; + rc = -EAGAIN; + } + local_irq_enable(); + smp_call_function(etr_sync_cpu_end,NULL,0,0); + preempt_enable(); + return rc; +} + +/* + * Handle the immediate effects of the different events. + * The port change event is used for online/offline changes. + */ +static struct etr_eacr etr_handle_events(struct etr_eacr eacr) +{ + if (test_and_clear_bit(ETR_EVENT_SYNC_CHECK, &etr_events)) + eacr.es = 0; + if (test_and_clear_bit(ETR_EVENT_SWITCH_LOCAL, &etr_events)) + eacr.es = eacr.sl = 0; + if (test_and_clear_bit(ETR_EVENT_PORT_ALERT, &etr_events)) + etr_port0_uptodate = etr_port1_uptodate = 0; + + if (test_and_clear_bit(ETR_EVENT_PORT0_CHANGE, &etr_events)) { + if (eacr.e0) + /* + * Port change of an enabled port. We have to + * assume that this can have caused an stepping + * port switch. + */ + etr_tolec = get_clock(); + eacr.p0 = etr_port0_online; + if (!eacr.p0) + eacr.e0 = 0; + etr_port0_uptodate = 0; + } + if (test_and_clear_bit(ETR_EVENT_PORT1_CHANGE, &etr_events)) { + if (eacr.e1) + /* + * Port change of an enabled port. We have to + * assume that this can have caused an stepping + * port switch. + */ + etr_tolec = get_clock(); + eacr.p1 = etr_port1_online; + if (!eacr.p1) + eacr.e1 = 0; + etr_port1_uptodate = 0; + } + clear_bit(ETR_EVENT_UPDATE, &etr_events); + return eacr; +} + +/* + * Set up a timer that expires after the etr_tolec + 1.6 seconds if + * one of the ports needs an update. + */ +static void etr_set_tolec_timeout(unsigned long long now) +{ + unsigned long micros; + + if ((!etr_eacr.p0 || etr_port0_uptodate) && + (!etr_eacr.p1 || etr_port1_uptodate)) + return; + micros = (now > etr_tolec) ? ((now - etr_tolec) >> 12) : 0; + micros = (micros > 1600000) ? 0 : 1600000 - micros; + mod_timer(&etr_timer, jiffies + (micros * HZ) / 1000000 + 1); +} + +/* + * Set up a time that expires after 1/2 second. + */ +static void etr_set_sync_timeout(void) +{ + mod_timer(&etr_timer, jiffies + HZ/2); +} + +/* + * Update the aib information for one or both ports. + */ +static struct etr_eacr etr_handle_update(struct etr_aib *aib, + struct etr_eacr eacr) +{ + /* With both ports disabled the aib information is useless. */ + if (!eacr.e0 && !eacr.e1) + return eacr; + + /* Update port0 or port1 with aib stored in etr_tasklet_fn. */ + if (aib->esw.q == 0) { + /* Information for port 0 stored. */ + if (eacr.p0 && !etr_port0_uptodate) { + etr_port0 = *aib; + if (etr_port0_online) + etr_port0_uptodate = 1; + } + } else { + /* Information for port 1 stored. */ + if (eacr.p1 && !etr_port1_uptodate) { + etr_port1 = *aib; + if (etr_port0_online) + etr_port1_uptodate = 1; + } + } + + /* + * Do not try to get the alternate port aib if the clock + * is not in sync yet. + */ + if (!eacr.es) + return eacr; + + /* + * If steai is available we can get the information about + * the other port immediately. If only stetr is available the + * data-port bit toggle has to be used. + */ + if (test_bit(ETR_FLAG_STEAI, &etr_flags)) { + if (eacr.p0 && !etr_port0_uptodate) { + etr_steai_cv(&etr_port0, ETR_STEAI_PORT_0); + etr_port0_uptodate = 1; + } + if (eacr.p1 && !etr_port1_uptodate) { + etr_steai_cv(&etr_port1, ETR_STEAI_PORT_1); + etr_port1_uptodate = 1; + } + } else { + /* + * One port was updated above, if the other + * port is not uptodate toggle dp bit. + */ + if ((eacr.p0 && !etr_port0_uptodate) || + (eacr.p1 && !etr_port1_uptodate)) + eacr.dp ^= 1; + else + eacr.dp = 0; + } + return eacr; +} + +/* + * Write new etr control register if it differs from the current one. + * Return 1 if etr_tolec has been updated as well. + */ +static void etr_update_eacr(struct etr_eacr eacr) +{ + int dp_changed; + + if (memcmp(&etr_eacr, &eacr, sizeof(eacr)) == 0) + /* No change, return. */ + return; + /* + * The disable of an active port of the change of the data port + * bit can/will cause a change in the data port. + */ + dp_changed = etr_eacr.e0 > eacr.e0 || etr_eacr.e1 > eacr.e1 || + (etr_eacr.dp ^ eacr.dp) != 0; + etr_eacr = eacr; + etr_setr(&etr_eacr); + if (dp_changed) + etr_tolec = get_clock(); +} + +/* + * ETR tasklet. In this function you'll find the main logic. In + * particular this is the only function that calls etr_update_eacr(), + * it "controls" the etr control register. + */ +static void etr_tasklet_fn(unsigned long dummy) +{ + unsigned long long now; + struct etr_eacr eacr; + struct etr_aib aib; + int sync_port; + + /* Create working copy of etr_eacr. */ + eacr = etr_eacr; + + /* Check for the different events and their immediate effects. */ + eacr = etr_handle_events(eacr); + + /* Check if ETR is supposed to be active. */ + eacr.ea = eacr.p0 || eacr.p1; + if (!eacr.ea) { + /* Both ports offline. Reset everything. */ + eacr.dp = eacr.es = eacr.sl = 0; + on_each_cpu(etr_disable_sync_clock, NULL, 0, 1); + del_timer_sync(&etr_timer); + etr_update_eacr(eacr); + set_bit(ETR_FLAG_EACCES, &etr_flags); + return; + } + + /* Store aib to get the current ETR status word. */ + BUG_ON(etr_stetr(&aib) != 0); + etr_port0.esw = etr_port1.esw = aib.esw; /* Copy status word. */ + now = get_clock(); + + /* + * Update the port information if the last stepping port change + * or data port change is older than 1.6 seconds. + */ + if (now >= etr_tolec + (1600000 << 12)) + eacr = etr_handle_update(&aib, eacr); + + /* + * Select ports to enable. The prefered synchronization mode is PPS. + * If a port can be enabled depends on a number of things: + * 1) The port needs to be online and uptodate. A port is not + * disabled just because it is not uptodate, but it is only + * enabled if it is uptodate. + * 2) The port needs to have the same mode (pps / etr). + * 3) The port needs to be usable -> etr_port_valid() == 1 + * 4) To enable the second port the clock needs to be in sync. + * 5) If both ports are useable and are ETR ports, the network id + * has to be the same. + * The eacr.sl bit is used to indicate etr mode vs. pps mode. + */ + if (eacr.p0 && aib.esw.psc0 == etr_lpsc_pps_mode) { + eacr.sl = 0; + eacr.e0 = 1; + if (!etr_mode_is_pps(etr_eacr)) + eacr.es = 0; + if (!eacr.es || !eacr.p1 || aib.esw.psc1 != etr_lpsc_pps_mode) + eacr.e1 = 0; + // FIXME: uptodate checks ? + else if (etr_port0_uptodate && etr_port1_uptodate) + eacr.e1 = 1; + sync_port = (etr_port0_uptodate && + etr_port_valid(&etr_port0, 0)) ? 0 : -1; + clear_bit(ETR_FLAG_EACCES, &etr_flags); + } else if (eacr.p1 && aib.esw.psc1 == etr_lpsc_pps_mode) { + eacr.sl = 0; + eacr.e0 = 0; + eacr.e1 = 1; + if (!etr_mode_is_pps(etr_eacr)) + eacr.es = 0; + sync_port = (etr_port1_uptodate && + etr_port_valid(&etr_port1, 1)) ? 1 : -1; + clear_bit(ETR_FLAG_EACCES, &etr_flags); + } else if (eacr.p0 && aib.esw.psc0 == etr_lpsc_operational_step) { + eacr.sl = 1; + eacr.e0 = 1; + if (!etr_mode_is_etr(etr_eacr)) + eacr.es = 0; + if (!eacr.es || !eacr.p1 || + aib.esw.psc1 != etr_lpsc_operational_alt) + eacr.e1 = 0; + else if (etr_port0_uptodate && etr_port1_uptodate && + etr_compare_network(&etr_port0, &etr_port1)) + eacr.e1 = 1; + sync_port = (etr_port0_uptodate && + etr_port_valid(&etr_port0, 0)) ? 0 : -1; + clear_bit(ETR_FLAG_EACCES, &etr_flags); + } else if (eacr.p1 && aib.esw.psc1 == etr_lpsc_operational_step) { + eacr.sl = 1; + eacr.e0 = 0; + eacr.e1 = 1; + if (!etr_mode_is_etr(etr_eacr)) + eacr.es = 0; + sync_port = (etr_port1_uptodate && + etr_port_valid(&etr_port1, 1)) ? 1 : -1; + clear_bit(ETR_FLAG_EACCES, &etr_flags); + } else { + /* Both ports not usable. */ + eacr.es = eacr.sl = 0; + sync_port = -1; + set_bit(ETR_FLAG_EACCES, &etr_flags); + } + + /* + * If the clock is in sync just update the eacr and return. + * If there is no valid sync port wait for a port update. + */ + if (eacr.es || sync_port < 0) { + etr_update_eacr(eacr); + etr_set_tolec_timeout(now); + return; + } + + /* + * Prepare control register for clock syncing + * (reset data port bit, set sync check control. + */ + eacr.dp = 0; + eacr.es = 1; + + /* + * Update eacr and try to synchronize the clock. If the update + * of eacr caused a stepping port switch (or if we have to + * assume that a stepping port switch has occured) or the + * clock syncing failed, reset the sync check control bit + * and set up a timer to try again after 0.5 seconds + */ + etr_update_eacr(eacr); + if (now < etr_tolec + (1600000 << 12) || + etr_sync_clock(&aib, sync_port) != 0) { + /* Sync failed. Try again in 1/2 second. */ + eacr.es = 0; + etr_update_eacr(eacr); + etr_set_sync_timeout(); + } else + etr_set_tolec_timeout(now); +} + +/* + * Sysfs interface functions + */ +static struct sysdev_class etr_sysclass = { + set_kset_name("etr") +}; + +static struct sys_device etr_port0_dev = { + .id = 0, + .cls = &etr_sysclass, +}; + +static struct sys_device etr_port1_dev = { + .id = 1, + .cls = &etr_sysclass, +}; + +/* + * ETR class attributes + */ +static ssize_t etr_stepping_port_show(struct sysdev_class *class, char *buf) +{ + return sprintf(buf, "%i\n", etr_port0.esw.p); +} + +static SYSDEV_CLASS_ATTR(stepping_port, 0400, etr_stepping_port_show, NULL); + +static ssize_t etr_stepping_mode_show(struct sysdev_class *class, char *buf) +{ + char *mode_str; + + if (etr_mode_is_pps(etr_eacr)) + mode_str = "pps"; + else if (etr_mode_is_etr(etr_eacr)) + mode_str = "etr"; + else + mode_str = "local"; + return sprintf(buf, "%s\n", mode_str); +} + +static SYSDEV_CLASS_ATTR(stepping_mode, 0400, etr_stepping_mode_show, NULL); + +/* + * ETR port attributes + */ +static inline struct etr_aib *etr_aib_from_dev(struct sys_device *dev) +{ + if (dev == &etr_port0_dev) + return etr_port0_online ? &etr_port0 : NULL; + else + return etr_port1_online ? &etr_port1 : NULL; +} + +static ssize_t etr_online_show(struct sys_device *dev, char *buf) +{ + unsigned int online; + + online = (dev == &etr_port0_dev) ? etr_port0_online : etr_port1_online; + return sprintf(buf, "%i\n", online); +} + +static ssize_t etr_online_store(struct sys_device *dev, + const char *buf, size_t count) +{ + unsigned int value; + + value = simple_strtoul(buf, NULL, 0); + if (value != 0 && value != 1) + return -EINVAL; + if (test_bit(ETR_FLAG_ENOSYS, &etr_flags)) + return -ENOSYS; + if (dev == &etr_port0_dev) { + if (etr_port0_online == value) + return count; /* Nothing to do. */ + etr_port0_online = value; + set_bit(ETR_EVENT_PORT0_CHANGE, &etr_events); + tasklet_hi_schedule(&etr_tasklet); + } else { + if (etr_port1_online == value) + return count; /* Nothing to do. */ + etr_port1_online = value; + set_bit(ETR_EVENT_PORT1_CHANGE, &etr_events); + tasklet_hi_schedule(&etr_tasklet); + } + return count; +} + +static SYSDEV_ATTR(online, 0600, etr_online_show, etr_online_store); + +static ssize_t etr_stepping_control_show(struct sys_device *dev, char *buf) +{ + return sprintf(buf, "%i\n", (dev == &etr_port0_dev) ? + etr_eacr.e0 : etr_eacr.e1); +} + +static SYSDEV_ATTR(stepping_control, 0400, etr_stepping_control_show, NULL); + +static ssize_t etr_mode_code_show(struct sys_device *dev, char *buf) +{ + if (!etr_port0_online && !etr_port1_online) + /* Status word is not uptodate if both ports are offline. */ + return -ENODATA; + return sprintf(buf, "%i\n", (dev == &etr_port0_dev) ? + etr_port0.esw.psc0 : etr_port0.esw.psc1); +} + +static SYSDEV_ATTR(state_code, 0400, etr_mode_code_show, NULL); + +static ssize_t etr_untuned_show(struct sys_device *dev, char *buf) +{ + struct etr_aib *aib = etr_aib_from_dev(dev); + + if (!aib || !aib->slsw.v1) + return -ENODATA; + return sprintf(buf, "%i\n", aib->edf1.u); +} + +static SYSDEV_ATTR(untuned, 0400, etr_untuned_show, NULL); + +static ssize_t etr_network_id_show(struct sys_device *dev, char *buf) +{ + struct etr_aib *aib = etr_aib_from_dev(dev); + + if (!aib || !aib->slsw.v1) + return -ENODATA; + return sprintf(buf, "%i\n", aib->edf1.net_id); +} + +static SYSDEV_ATTR(network, 0400, etr_network_id_show, NULL); + +static ssize_t etr_id_show(struct sys_device *dev, char *buf) +{ + struct etr_aib *aib = etr_aib_from_dev(dev); + + if (!aib || !aib->slsw.v1) + return -ENODATA; + return sprintf(buf, "%i\n", aib->edf1.etr_id); +} + +static SYSDEV_ATTR(id, 0400, etr_id_show, NULL); + +static ssize_t etr_port_number_show(struct sys_device *dev, char *buf) +{ + struct etr_aib *aib = etr_aib_from_dev(dev); + + if (!aib || !aib->slsw.v1) + return -ENODATA; + return sprintf(buf, "%i\n", aib->edf1.etr_pn); +} + +static SYSDEV_ATTR(port, 0400, etr_port_number_show, NULL); + +static ssize_t etr_coupled_show(struct sys_device *dev, char *buf) +{ + struct etr_aib *aib = etr_aib_from_dev(dev); + + if (!aib || !aib->slsw.v3) + return -ENODATA; + return sprintf(buf, "%i\n", aib->edf3.c); +} + +static SYSDEV_ATTR(coupled, 0400, etr_coupled_show, NULL); + +static ssize_t etr_local_time_show(struct sys_device *dev, char *buf) +{ + struct etr_aib *aib = etr_aib_from_dev(dev); + + if (!aib || !aib->slsw.v3) + return -ENODATA; + return sprintf(buf, "%i\n", aib->edf3.blto); +} + +static SYSDEV_ATTR(local_time, 0400, etr_local_time_show, NULL); + +static ssize_t etr_utc_offset_show(struct sys_device *dev, char *buf) +{ + struct etr_aib *aib = etr_aib_from_dev(dev); + + if (!aib || !aib->slsw.v3) + return -ENODATA; + return sprintf(buf, "%i\n", aib->edf3.buo); +} + +static SYSDEV_ATTR(utc_offset, 0400, etr_utc_offset_show, NULL); + +static struct sysdev_attribute *etr_port_attributes[] = { + &attr_online, + &attr_stepping_control, + &attr_state_code, + &attr_untuned, + &attr_network, + &attr_id, + &attr_port, + &attr_coupled, + &attr_local_time, + &attr_utc_offset, + NULL +}; + +static int __init etr_register_port(struct sys_device *dev) +{ + struct sysdev_attribute **attr; + int rc; + + rc = sysdev_register(dev); + if (rc) + goto out; + for (attr = etr_port_attributes; *attr; attr++) { + rc = sysdev_create_file(dev, *attr); + if (rc) + goto out_unreg; + } + return 0; +out_unreg: + for (; attr >= etr_port_attributes; attr--) + sysdev_remove_file(dev, *attr); + sysdev_unregister(dev); +out: + return rc; +} + +static void __init etr_unregister_port(struct sys_device *dev) +{ + struct sysdev_attribute **attr; + + for (attr = etr_port_attributes; *attr; attr++) + sysdev_remove_file(dev, *attr); + sysdev_unregister(dev); +} + +static int __init etr_init_sysfs(void) +{ + int rc; + + rc = sysdev_class_register(&etr_sysclass); + if (rc) + goto out; + rc = sysdev_class_create_file(&etr_sysclass, &attr_stepping_port); + if (rc) + goto out_unreg_class; + rc = sysdev_class_create_file(&etr_sysclass, &attr_stepping_mode); + if (rc) + goto out_remove_stepping_port; + rc = etr_register_port(&etr_port0_dev); + if (rc) + goto out_remove_stepping_mode; + rc = etr_register_port(&etr_port1_dev); + if (rc) + goto out_remove_port0; + return 0; + +out_remove_port0: + etr_unregister_port(&etr_port0_dev); +out_remove_stepping_mode: + sysdev_class_remove_file(&etr_sysclass, &attr_stepping_mode); +out_remove_stepping_port: + sysdev_class_remove_file(&etr_sysclass, &attr_stepping_port); +out_unreg_class: + sysdev_class_unregister(&etr_sysclass); +out: + return rc; } +device_initcall(etr_init_sysfs); diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c index 01f3d29bdb06..9d5b02801b46 100644 --- a/arch/s390/kernel/vtime.c +++ b/arch/s390/kernel/vtime.c @@ -524,16 +524,15 @@ EXPORT_SYMBOL(del_virt_timer); void init_cpu_vtimer(void) { struct vtimer_queue *vt_list; - unsigned long cr0; /* kick the virtual timer */ S390_lowcore.exit_timer = VTIMER_MAX_SLICE; S390_lowcore.last_update_timer = VTIMER_MAX_SLICE; asm volatile ("SPT %0" : : "m" (S390_lowcore.last_update_timer)); asm volatile ("STCK %0" : "=m" (S390_lowcore.last_update_clock)); - __ctl_store(cr0, 0, 0); - cr0 |= 0x400; - __ctl_load(cr0, 0, 0); + + /* enable cpu timer interrupts */ + __ctl_set_bit(0,10); vt_list = &per_cpu(virt_cpu_timer, smp_processor_id()); INIT_LIST_HEAD(&vt_list->list); @@ -572,6 +571,7 @@ void __init vtime_init(void) if (register_idle_notifier(&vtimer_idle_nb)) panic("Couldn't register idle notifier"); + /* Enable cpu timer interrupts on the boot cpu. */ init_cpu_vtimer(); } diff --git a/arch/s390/lib/delay.c b/arch/s390/lib/delay.c index 027c4742a001..02854449b74b 100644 --- a/arch/s390/lib/delay.c +++ b/arch/s390/lib/delay.c @@ -1,5 +1,5 @@ /* - * arch/s390/kernel/delay.c + * arch/s390/lib/delay.c * Precise Delay Loops for S390 * * S390 version @@ -13,10 +13,8 @@ #include #include - -#ifdef CONFIG_SMP -#include -#endif +#include +#include void __delay(unsigned long loops) { @@ -31,17 +29,39 @@ void __delay(unsigned long loops) } /* - * Waits for 'usecs' microseconds using the tod clock, giving up the time slice - * of the virtual PU inbetween to avoid congestion. + * Waits for 'usecs' microseconds using the TOD clock comparator. */ void __udelay(unsigned long usecs) { - uint64_t start_cc; + u64 end, time, jiffy_timer = 0; + unsigned long flags, cr0, mask, dummy; + + local_irq_save(flags); + if (raw_irqs_disabled_flags(flags)) { + jiffy_timer = S390_lowcore.jiffy_timer; + S390_lowcore.jiffy_timer = -1ULL - (4096 << 12); + __ctl_store(cr0, 0, 0); + dummy = (cr0 & 0xffff00e0) | 0x00000800; + __ctl_load(dummy , 0, 0); + mask = psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_EXT; + } else + mask = psw_kernel_bits | PSW_MASK_WAIT | + PSW_MASK_EXT | PSW_MASK_IO; + + end = get_clock() + ((u64) usecs << 12); + do { + time = end < S390_lowcore.jiffy_timer ? + end : S390_lowcore.jiffy_timer; + set_clock_comparator(time); + trace_hardirqs_on(); + __load_psw_mask(mask); + local_irq_disable(); + } while (get_clock() < end); - if (usecs == 0) - return; - start_cc = get_clock(); - do { - cpu_relax(); - } while (((get_clock() - start_cc)/4096) < usecs); + if (raw_irqs_disabled_flags(flags)) { + __ctl_load(cr0, 0, 0); + S390_lowcore.jiffy_timer = jiffy_timer; + } + set_clock_comparator(S390_lowcore.jiffy_timer); + local_irq_restore(flags); } -- cgit v1.2.3 From 1b2782948997cf5a0d1747de13d43ba7dfa7c543 Mon Sep 17 00:00:00 2001 From: Jan Glauber Date: Mon, 5 Feb 2007 21:18:22 +0100 Subject: [S390] Support for s390 Pseudo Random Number Generator Starting with the z9 the CPU Cryptographic Assist Facility comes with an integrated Pseudo Random Number Generator. The generator creates random numbers by an algorithm similar to the ANSI X9.17 standard. The pseudo-random numbers can be accessed via a character device driver node called /dev/prandom. Similar to /dev/urandom any amount of bytes can be read from the device without blocking. Signed-off-by: Jan Glauber Signed-off-by: Martin Schwidefsky --- arch/s390/crypto/Makefile | 1 + arch/s390/crypto/crypt_s390.h | 1 + arch/s390/crypto/prng.c | 213 ++++++++++++++++++++++++++++++++++++++++++ arch/s390/defconfig | 1 + 4 files changed, 216 insertions(+) create mode 100644 arch/s390/crypto/prng.c (limited to 'arch') diff --git a/arch/s390/crypto/Makefile b/arch/s390/crypto/Makefile index 21720c03d653..14e552c5cc43 100644 --- a/arch/s390/crypto/Makefile +++ b/arch/s390/crypto/Makefile @@ -6,3 +6,4 @@ obj-$(CONFIG_CRYPTO_SHA1_S390) += sha1_s390.o obj-$(CONFIG_CRYPTO_SHA256_S390) += sha256_s390.o obj-$(CONFIG_CRYPTO_DES_S390) += des_s390.o des_check_key.o obj-$(CONFIG_CRYPTO_AES_S390) += aes_s390.o +obj-$(CONFIG_S390_PRNG) += prng.o diff --git a/arch/s390/crypto/crypt_s390.h b/arch/s390/crypto/crypt_s390.h index 2b92c2fd12d4..2775d2618332 100644 --- a/arch/s390/crypto/crypt_s390.h +++ b/arch/s390/crypto/crypt_s390.h @@ -71,6 +71,7 @@ enum crypt_s390_kmc_func { KMC_AES_192_DECRYPT = CRYPT_S390_KMC | 0x13 | 0x80, KMC_AES_256_ENCRYPT = CRYPT_S390_KMC | 0x14, KMC_AES_256_DECRYPT = CRYPT_S390_KMC | 0x14 | 0x80, + KMC_PRNG = CRYPT_S390_KMC | 0x43, }; /* diff --git a/arch/s390/crypto/prng.c b/arch/s390/crypto/prng.c new file mode 100644 index 000000000000..8eb3a1aedc22 --- /dev/null +++ b/arch/s390/crypto/prng.c @@ -0,0 +1,213 @@ +/* + * Copyright IBM Corp. 2006,2007 + * Author(s): Jan Glauber + * Driver for the s390 pseudo random number generator + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "crypt_s390.h" + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Jan Glauber "); +MODULE_DESCRIPTION("s390 PRNG interface"); + +static int prng_chunk_size = 256; +module_param(prng_chunk_size, int, S_IRUSR | S_IRGRP | S_IROTH); +MODULE_PARM_DESC(prng_chunk_size, "PRNG read chunk size in bytes"); + +static int prng_entropy_limit = 4096; +module_param(prng_entropy_limit, int, S_IRUSR | S_IRGRP | S_IROTH | S_IWUSR); +MODULE_PARM_DESC(prng_entropy_limit, + "PRNG add entropy after that much bytes were produced"); + +/* + * Any one who considers arithmetical methods of producing random digits is, + * of course, in a state of sin. -- John von Neumann + */ + +struct s390_prng_data { + unsigned long count; /* how many bytes were produced */ + char *buf; +}; + +static struct s390_prng_data *p; + +/* copied from libica, use a non-zero initial parameter block */ +static unsigned char parm_block[32] = { +0x0F,0x2B,0x8E,0x63,0x8C,0x8E,0xD2,0x52,0x64,0xB7,0xA0,0x7B,0x75,0x28,0xB8,0xF4, +0x75,0x5F,0xD2,0xA6,0x8D,0x97,0x11,0xFF,0x49,0xD8,0x23,0xF3,0x7E,0x21,0xEC,0xA0, +}; + +static int prng_open(struct inode *inode, struct file *file) +{ + return nonseekable_open(inode, file); +} + +static void prng_add_entropy(void) +{ + __u64 entropy[4]; + unsigned int i; + int ret; + + for (i = 0; i < 16; i++) { + ret = crypt_s390_kmc(KMC_PRNG, parm_block, (char *)entropy, + (char *)entropy, sizeof(entropy)); + BUG_ON(ret < 0 || ret != sizeof(entropy)); + memcpy(parm_block, entropy, sizeof(entropy)); + } +} + +static void prng_seed(int nbytes) +{ + char buf[16]; + int i = 0; + + BUG_ON(nbytes > 16); + get_random_bytes(buf, nbytes); + + /* Add the entropy */ + while (nbytes >= 8) { + *((__u64 *)parm_block) ^= *((__u64 *)buf+i*8); + prng_add_entropy(); + i += 8; + nbytes -= 8; + } + prng_add_entropy(); +} + +static ssize_t prng_read(struct file *file, char __user *ubuf, size_t nbytes, + loff_t *ppos) +{ + int chunk, n; + int ret = 0; + int tmp; + + /* nbytes can be arbitrary long, we spilt it into chunks */ + while (nbytes) { + /* same as in extract_entropy_user in random.c */ + if (need_resched()) { + if (signal_pending(current)) { + if (ret == 0) + ret = -ERESTARTSYS; + break; + } + schedule(); + } + + /* + * we lose some random bytes if an attacker issues + * reads < 8 bytes, but we don't care + */ + chunk = min_t(int, nbytes, prng_chunk_size); + + /* PRNG only likes multiples of 8 bytes */ + n = (chunk + 7) & -8; + + if (p->count > prng_entropy_limit) + prng_seed(8); + + /* if the CPU supports PRNG stckf is present too */ + asm volatile(".insn s,0xb27c0000,%0" + : "=m" (*((unsigned long long *)p->buf)) : : "cc"); + + /* + * Beside the STCKF the input for the TDES-EDE is the output + * of the last operation. We differ here from X9.17 since we + * only store one timestamp into the buffer. Padding the whole + * buffer with timestamps does not improve security, since + * successive stckf have nearly constant offsets. + * If an attacker knows the first timestamp it would be + * trivial to guess the additional values. One timestamp + * is therefore enough and still guarantees unique input values. + * + * Note: you can still get strict X9.17 conformity by setting + * prng_chunk_size to 8 bytes. + */ + tmp = crypt_s390_kmc(KMC_PRNG, parm_block, p->buf, p->buf, n); + BUG_ON((tmp < 0) || (tmp != n)); + + p->count += n; + + if (copy_to_user(ubuf, p->buf, chunk)) + return -EFAULT; + + nbytes -= chunk; + ret += chunk; + ubuf += chunk; + } + return ret; +} + +static struct file_operations prng_fops = { + .owner = THIS_MODULE, + .open = &prng_open, + .release = NULL, + .read = &prng_read, +}; + +static struct miscdevice prng_dev = { + .name = "prandom", + .minor = MISC_DYNAMIC_MINOR, + .fops = &prng_fops, +}; + +static int __init prng_init(void) +{ + int ret; + + /* check if the CPU has a PRNG */ + if (!crypt_s390_func_available(KMC_PRNG)) + return -EOPNOTSUPP; + + if (prng_chunk_size < 8) + return -EINVAL; + + p = kmalloc(sizeof(struct s390_prng_data), GFP_KERNEL); + if (!p) + return -ENOMEM; + p->count = 0; + + p->buf = kmalloc(prng_chunk_size, GFP_KERNEL); + if (!p->buf) { + ret = -ENOMEM; + goto out_free; + } + + /* initialize the PRNG, add 128 bits of entropy */ + prng_seed(16); + + ret = misc_register(&prng_dev); + if (ret) { + printk(KERN_WARNING + "Could not register misc device for PRNG.\n"); + goto out_buf; + } + return 0; + +out_buf: + kfree(p->buf); +out_free: + kfree(p); + return ret; +} + +static void __exit prng_exit(void) +{ + /* wipe me */ + memset(p->buf, 0, prng_chunk_size); + kfree(p->buf); + kfree(p); + + misc_deregister(&prng_dev); +} + +module_init(prng_init); +module_exit(prng_exit); diff --git a/arch/s390/defconfig b/arch/s390/defconfig index 12eb97f9c1d1..dbe3df4b0dab 100644 --- a/arch/s390/defconfig +++ b/arch/s390/defconfig @@ -757,6 +757,7 @@ CONFIG_CRYPTO_CBC=y # CONFIG_CRYPTO_SHA256_S390 is not set # CONFIG_CRYPTO_DES_S390 is not set # CONFIG_CRYPTO_AES_S390 is not set +CONFIG_S390_PRNG=m # # Library routines -- cgit v1.2.3 From fe355b7f1c7400cbb71762a1237461be03f88265 Mon Sep 17 00:00:00 2001 From: Hongjie Yang Date: Mon, 5 Feb 2007 21:18:24 +0100 Subject: [S390] boot from NSS support Add support to boot from a named saved segment (NSS). Signed-off-by: Hongjie Yang Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/head31.S | 34 ++------ arch/s390/kernel/head64.S | 30 ++----- arch/s390/kernel/ipl.c | 87 ++++++++++++++++++++ arch/s390/kernel/setup.c | 178 +++++++++++++++++++++++++++++++++++++++-- arch/s390/kernel/vmlinux.lds.S | 10 +-- 5 files changed, 275 insertions(+), 64 deletions(-) (limited to 'arch') diff --git a/arch/s390/kernel/head31.S b/arch/s390/kernel/head31.S index eca507050e47..b3dcdcdc80c0 100644 --- a/arch/s390/kernel/head31.S +++ b/arch/s390/kernel/head31.S @@ -51,20 +51,12 @@ startup_continue: st %r15,__LC_KERNEL_STACK # set end of kernel stack ahi %r15,-96 xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) # clear backchain - - l %r14,.Lipl_save_parameters-.LPG1(%r13) - basr %r14,%r14 # -# clear bss memory +# Save ipl parameters, clear bss memory, initialize storage key for kernel pages, +# and create a kernel NSS if the SAVESYS= parm is defined # - l %r2,.Lbss_bgn-.LPG1(%r13) # start of bss - l %r3,.Lbss_end-.LPG1(%r13) # end of bss - sr %r3,%r2 # length of bss - sr %r4,%r4 - sr %r5,%r5 # set src,length and pad to zero - sr %r0,%r0 - mvcle %r2,%r4,0 # clear mem - jo .-4 # branch back, if not finish + l %r14,.Lstartup_init-.LPG1(%r13) + basr %r14,%r14 l %r2,.Lrcp-.LPG1(%r13) # Read SCP forced command word .Lservicecall: @@ -125,10 +117,10 @@ startup_continue: b .Lfchunk-.LPG1(%r13) .align 4 -.Lipl_save_parameters: - .long ipl_save_parameters .Linittu: .long init_thread_union +.Lstartup_init: + .long startup_init .Lpmask: .byte 0 .align 8 @@ -206,20 +198,6 @@ startup_continue: jl .Lloop .Ldonemem: l %r12,.Lmflags-.LPG1(%r13) # get address of machine_flags -# -# find out if we are running under VM -# - stidp __LC_CPUID # store cpuid - tm __LC_CPUID,0xff # running under VM ? - bno .Lnovm-.LPG1(%r13) - oi 3(%r12),1 # set VM flag -.Lnovm: - lh %r0,__LC_CPUID+4 # get cpu version - chi %r0,0x7490 # running on a P/390 ? - bne .Lnop390-.LPG1(%r13) - oi 3(%r12),4 # set P/390 flag -.Lnop390: - # # find out if we have an IEEE fpu # diff --git a/arch/s390/kernel/head64.S b/arch/s390/kernel/head64.S index e940e802cb40..030a1c95f47c 100644 --- a/arch/s390/kernel/head64.S +++ b/arch/s390/kernel/head64.S @@ -58,18 +58,11 @@ startup_continue: stg %r15,__LC_KERNEL_STACK # set end of kernel stack aghi %r15,-160 xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) # clear backchain - - brasl %r14,ipl_save_parameters # -# clear bss memory +# Save ipl parameters, clear bss memory, initialize storage key for kernel pages, +# and create a kernel NSS if the SAVESYS= parm is defined # - larl %r2,__bss_start # start of bss segment - larl %r3,_end # end of bss segment - sgr %r3,%r2 # length of bss - sgr %r4,%r4 # - sgr %r5,%r5 # set src,length and pad to zero - mvcle %r2,%r4,0 # clear mem - jo .-4 # branch back, if not finish + brasl %r14,startup_init # set program check new psw mask mvc __LC_PGM_NEW_PSW(8),.Lpcmsk-.LPG1(%r13) larl %r1,.Lslowmemdetect # set program check address @@ -78,6 +71,10 @@ startup_continue: diag %r0,%r1,0x260 # get memory size of virtual machine cgr %r0,%r1 # different? -> old detection routine jne .Lslowmemdetect + larl %r3,ipl_flags + llgt %r3,0(%r3) + chi %r3,4 # ipled from an kernel NSS + je .Lslowmemdetect aghi %r1,1 # size is one more than end larl %r2,memory_chunk stg %r1,8(%r2) # store size of chunk @@ -225,19 +222,6 @@ startup_continue: .Ldonemem: larl %r12,machine_flags -# -# find out if we are running under VM -# - stidp __LC_CPUID # store cpuid - tm __LC_CPUID,0xff # running under VM ? - bno 0f-.LPG1(%r13) - oi 7(%r12),1 # set VM flag -0: lh %r0,__LC_CPUID+4 # get cpu version - chi %r0,0x7490 # running on a P/390 ? - bne 1f-.LPG1(%r13) - oi 7(%r12),4 # set P/390 flag -1: - # # find out if we have the MVPG instruction # diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c index 2c91226e1d40..13eacce62011 100644 --- a/arch/s390/kernel/ipl.c +++ b/arch/s390/kernel/ipl.c @@ -34,12 +34,14 @@ enum ipl_type { IPL_TYPE_UNKNOWN = 2, IPL_TYPE_CCW = 4, IPL_TYPE_FCP = 8, + IPL_TYPE_NSS = 16, }; #define IPL_NONE_STR "none" #define IPL_UNKNOWN_STR "unknown" #define IPL_CCW_STR "ccw" #define IPL_FCP_STR "fcp" +#define IPL_NSS_STR "nss" static char *ipl_type_str(enum ipl_type type) { @@ -50,6 +52,8 @@ static char *ipl_type_str(enum ipl_type type) return IPL_CCW_STR; case IPL_TYPE_FCP: return IPL_FCP_STR; + case IPL_TYPE_NSS: + return IPL_NSS_STR; case IPL_TYPE_UNKNOWN: default: return IPL_UNKNOWN_STR; @@ -64,6 +68,7 @@ enum ipl_method { IPL_METHOD_FCP_RO_DIAG, IPL_METHOD_FCP_RW_DIAG, IPL_METHOD_FCP_RO_VM, + IPL_METHOD_NSS, }; enum shutdown_action { @@ -114,11 +119,14 @@ enum diag308_rc { static int diag308_set_works = 0; static int reipl_capabilities = IPL_TYPE_UNKNOWN; + static enum ipl_type reipl_type = IPL_TYPE_UNKNOWN; static enum ipl_method reipl_method = IPL_METHOD_NONE; static struct ipl_parameter_block *reipl_block_fcp; static struct ipl_parameter_block *reipl_block_ccw; +static char reipl_nss_name[NSS_NAME_SIZE + 1]; + static int dump_capabilities = IPL_TYPE_NONE; static enum ipl_type dump_type = IPL_TYPE_NONE; static enum ipl_method dump_method = IPL_METHOD_NONE; @@ -173,6 +181,24 @@ static struct subsys_attribute sys_##_prefix##_##_name##_attr = \ sys_##_prefix##_##_name##_show, \ sys_##_prefix##_##_name##_store); +#define DEFINE_IPL_ATTR_STR_RW(_prefix, _name, _fmt_out, _fmt_in, _value)\ +static ssize_t sys_##_prefix##_##_name##_show(struct subsystem *subsys, \ + char *page) \ +{ \ + return sprintf(page, _fmt_out, _value); \ +} \ +static ssize_t sys_##_prefix##_##_name##_store(struct subsystem *subsys,\ + const char *buf, size_t len) \ +{ \ + if (sscanf(buf, _fmt_in, _value) != 1) \ + return -EINVAL; \ + return len; \ +} \ +static struct subsys_attribute sys_##_prefix##_##_name##_attr = \ + __ATTR(_name,(S_IRUGO | S_IWUSR), \ + sys_##_prefix##_##_name##_show, \ + sys_##_prefix##_##_name##_store); + static void make_attrs_ro(struct attribute **attrs) { while (*attrs) { @@ -189,6 +215,8 @@ static enum ipl_type ipl_get_type(void) { struct ipl_parameter_block *ipl = IPL_PARMBLOCK_START; + if (ipl_flags & IPL_NSS_VALID) + return IPL_TYPE_NSS; if (!(ipl_flags & IPL_DEVNO_VALID)) return IPL_TYPE_UNKNOWN; if (!(ipl_flags & IPL_PARMBLOCK_VALID)) @@ -324,6 +352,20 @@ static struct attribute_group ipl_ccw_attr_group = { .attrs = ipl_ccw_attrs, }; +/* NSS ipl device attributes */ + +DEFINE_IPL_ATTR_RO(ipl_nss, name, "%s\n", kernel_nss_name); + +static struct attribute *ipl_nss_attrs[] = { + &sys_ipl_type_attr.attr, + &sys_ipl_nss_name_attr.attr, + NULL, +}; + +static struct attribute_group ipl_nss_attr_group = { + .attrs = ipl_nss_attrs, +}; + /* UNKNOWN ipl device attributes */ static struct attribute *ipl_unknown_attrs[] = { @@ -432,6 +474,21 @@ static struct attribute_group reipl_ccw_attr_group = { .attrs = reipl_ccw_attrs, }; + +/* NSS reipl device attributes */ + +DEFINE_IPL_ATTR_STR_RW(reipl_nss, name, "%s\n", "%s\n", reipl_nss_name); + +static struct attribute *reipl_nss_attrs[] = { + &sys_reipl_nss_name_attr.attr, + NULL, +}; + +static struct attribute_group reipl_nss_attr_group = { + .name = IPL_NSS_STR, + .attrs = reipl_nss_attrs, +}; + /* reipl type */ static int reipl_set_type(enum ipl_type type) @@ -454,6 +511,9 @@ static int reipl_set_type(enum ipl_type type) else reipl_method = IPL_METHOD_FCP_RO_DIAG; break; + case IPL_TYPE_NSS: + reipl_method = IPL_METHOD_NSS; + break; default: reipl_method = IPL_METHOD_NONE; } @@ -475,6 +535,8 @@ static ssize_t reipl_type_store(struct subsystem *subsys, const char *buf, rc = reipl_set_type(IPL_TYPE_CCW); else if (strncmp(buf, IPL_FCP_STR, strlen(IPL_FCP_STR)) == 0) rc = reipl_set_type(IPL_TYPE_FCP); + else if (strncmp(buf, IPL_NSS_STR, strlen(IPL_NSS_STR)) == 0) + rc = reipl_set_type(IPL_TYPE_NSS); return (rc != 0) ? rc : len; } @@ -647,6 +709,10 @@ void do_reipl(void) case IPL_METHOD_FCP_RO_VM: __cpcmd("IPL", NULL, 0, NULL); break; + case IPL_METHOD_NSS: + sprintf(buf, "IPL %s", reipl_nss_name); + __cpcmd(buf, NULL, 0, NULL); + break; case IPL_METHOD_NONE: default: if (MACHINE_IS_VM) @@ -733,6 +799,10 @@ static int __init ipl_init(void) case IPL_TYPE_FCP: rc = ipl_register_fcp_files(); break; + case IPL_TYPE_NSS: + rc = sysfs_create_group(&ipl_subsys.kset.kobj, + &ipl_nss_attr_group); + break; default: rc = sysfs_create_group(&ipl_subsys.kset.kobj, &ipl_unknown_attr_group); @@ -755,6 +825,20 @@ static void __init reipl_probe(void) free_page((unsigned long)buffer); } +static int __init reipl_nss_init(void) +{ + int rc; + + if (!MACHINE_IS_VM) + return 0; + rc = sysfs_create_group(&reipl_subsys.kset.kobj, &reipl_nss_attr_group); + if (rc) + return rc; + strncpy(reipl_nss_name, kernel_nss_name, NSS_NAME_SIZE + 1); + reipl_capabilities |= IPL_TYPE_NSS; + return 0; +} + static int __init reipl_ccw_init(void) { int rc; @@ -835,6 +919,9 @@ static int __init reipl_init(void) if (rc) return rc; rc = reipl_fcp_init(); + if (rc) + return rc; + rc = reipl_nss_init(); if (rc) return rc; rc = reipl_set_type(ipl_get_type()); diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index b1b9a931237d..2569aafcc543 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -38,6 +38,7 @@ #include #include #include +#include #include #include @@ -50,6 +51,7 @@ #include #include #include +#include #include long psw_kernel_bits = (PSW_BASE_BITS | PSW_MASK_DAT | PSW_ASC_PRIMARY | @@ -282,6 +284,140 @@ static void __init conmode_default(void) } } +/* + * Create a Kernel NSS if the SAVESYS= parameter is defined +*/ +#define DEFSYS_CMD_SIZE 96 +#define SAVESYS_CMD_SIZE 32 + +extern int _eshared; +char kernel_nss_name[NSS_NAME_SIZE + 1]; + +#ifdef CONFIG_SHARED_KERNEL +static __init void create_kernel_nss(void) +{ + unsigned int i, stext_pfn, eshared_pfn, end_pfn, min_size; +#ifdef CONFIG_BLK_DEV_INITRD + unsigned int sinitrd_pfn, einitrd_pfn; +#endif + int response; + char *savesys_ptr; + char upper_command_line[COMMAND_LINE_SIZE]; + char defsys_cmd[DEFSYS_CMD_SIZE]; + char savesys_cmd[SAVESYS_CMD_SIZE]; + + /* Do nothing if we are not running under VM */ + if (!MACHINE_IS_VM) + return; + + /* Convert COMMAND_LINE to upper case */ + for (i = 0; i < strlen(COMMAND_LINE); i++) + upper_command_line[i] = toupper(COMMAND_LINE[i]); + + savesys_ptr = strstr(upper_command_line, "SAVESYS="); + + if (!savesys_ptr) + return; + + savesys_ptr += 8; /* Point to the beginning of the NSS name */ + for (i = 0; i < NSS_NAME_SIZE; i++) { + if (savesys_ptr[i] == ' ' || savesys_ptr[i] == '\0') + break; + kernel_nss_name[i] = savesys_ptr[i]; + } + + stext_pfn = PFN_DOWN(__pa(&_stext)); + eshared_pfn = PFN_DOWN(__pa(&_eshared)); + end_pfn = PFN_UP(__pa(&_end)); + min_size = end_pfn << 2; + + sprintf(defsys_cmd, "DEFSYS %s 00000-%.5X EW %.5X-%.5X SR %.5X-%.5X", + kernel_nss_name, stext_pfn - 1, stext_pfn, eshared_pfn - 1, + eshared_pfn, end_pfn); + +#ifdef CONFIG_BLK_DEV_INITRD + if (INITRD_START && INITRD_SIZE) { + sinitrd_pfn = PFN_DOWN(__pa(INITRD_START)); + einitrd_pfn = PFN_UP(__pa(INITRD_START + INITRD_SIZE)); + min_size = einitrd_pfn << 2; + sprintf(defsys_cmd, "%s EW %.5X-%.5X", defsys_cmd, + sinitrd_pfn, einitrd_pfn); + } +#endif + + sprintf(defsys_cmd, "%s EW MINSIZE=%.7iK", defsys_cmd, min_size); + sprintf(savesys_cmd, "SAVESYS %s \n IPL %s", + kernel_nss_name, kernel_nss_name); + + __cpcmd(defsys_cmd, NULL, 0, &response); + + if (response != 0) + return; + + __cpcmd(savesys_cmd, NULL, 0, &response); + + if (response != strlen(savesys_cmd)) + return; + + ipl_flags = IPL_NSS_VALID; +} + +#else /* CONFIG_SHARED_KERNEL */ + +static inline void create_kernel_nss(void) { } + +#endif /* CONFIG_SHARED_KERNEL */ + +/* + * Clear bss memory + */ +static __init void clear_bss_section(void) +{ + memset(__bss_start, 0, _end - __bss_start); +} + +/* + * Initialize storage key for kernel pages + */ +static __init void init_kernel_storage_key(void) +{ + unsigned long end_pfn, init_pfn; + + end_pfn = PFN_UP(__pa(&_end)); + + for (init_pfn = 0 ; init_pfn < end_pfn; init_pfn++) + page_set_storage_key(init_pfn << PAGE_SHIFT, PAGE_DEFAULT_KEY); +} + +static __init void detect_machine_type(void) +{ + struct cpuinfo_S390 *cpuinfo = &S390_lowcore.cpu_data; + + asm volatile("stidp %0" : "=m" (S390_lowcore.cpu_data.cpu_id)); + + /* Running under z/VM ? */ + if (cpuinfo->cpu_id.version == 0xff) + machine_flags |= 1; + + /* Running on a P/390 ? */ + if (cpuinfo->cpu_id.machine == 0x7490) + machine_flags |= 4; +} + +/* + * Save ipl parameters, clear bss memory, initialize storage keys + * and create a kernel NSS at startup if the SAVESYS= parm is defined + */ +void __init startup_init(void) +{ + ipl_save_parameters(); + clear_bss_section(); + init_kernel_storage_key(); + lockdep_init(); + detect_machine_type(); + create_kernel_nss(); +} + #ifdef CONFIG_SMP void (*_machine_restart)(char *command) = machine_restart_smp; void (*_machine_halt)(void) = machine_halt_smp; @@ -523,7 +659,7 @@ setup_lowcore(void) static void __init setup_resources(void) { - struct resource *res; + struct resource *res, *sub_res; int i; code_resource.start = (unsigned long) &_text; @@ -548,8 +684,38 @@ setup_resources(void) res->start = memory_chunk[i].addr; res->end = memory_chunk[i].addr + memory_chunk[i].size - 1; request_resource(&iomem_resource, res); - request_resource(res, &code_resource); - request_resource(res, &data_resource); + + if (code_resource.start >= res->start && + code_resource.start <= res->end && + code_resource.end > res->end) { + sub_res = alloc_bootmem_low(sizeof(struct resource)); + memcpy(sub_res, &code_resource, + sizeof(struct resource)); + sub_res->end = res->end; + code_resource.start = res->end + 1; + request_resource(res, sub_res); + } + + if (code_resource.start >= res->start && + code_resource.start <= res->end && + code_resource.end <= res->end) + request_resource(res, &code_resource); + + if (data_resource.start >= res->start && + data_resource.start <= res->end && + data_resource.end > res->end) { + sub_res = alloc_bootmem_low(sizeof(struct resource)); + memcpy(sub_res, &data_resource, + sizeof(struct resource)); + sub_res->end = res->end; + data_resource.start = res->end + 1; + request_resource(res, sub_res); + } + + if (data_resource.start >= res->start && + data_resource.start <= res->end && + data_resource.end <= res->end) + request_resource(res, &data_resource); } } @@ -585,7 +751,7 @@ static void __init setup_memory(void) { unsigned long bootmap_size; - unsigned long start_pfn, end_pfn, init_pfn; + unsigned long start_pfn, end_pfn; int i; /* @@ -595,10 +761,6 @@ setup_memory(void) start_pfn = PFN_UP(__pa(&_end)); end_pfn = max_pfn = PFN_DOWN(memory_end); - /* Initialize storage key for kernel pages */ - for (init_pfn = 0 ; init_pfn < start_pfn; init_pfn++) - page_set_storage_key(init_pfn << PAGE_SHIFT, PAGE_DEFAULT_KEY); - #ifdef CONFIG_BLK_DEV_INITRD /* * Move the initrd in case the bitmap of the bootmem allocater diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S index fe0f2e97ba7b..8fedb1f9fc97 100644 --- a/arch/s390/kernel/vmlinux.lds.S +++ b/arch/s390/kernel/vmlinux.lds.S @@ -31,11 +31,6 @@ SECTIONS _etext = .; /* End of text section */ - . = ALIGN(16); /* Exception table */ - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - RODATA #ifdef CONFIG_SHARED_KERNEL @@ -44,6 +39,11 @@ SECTIONS _eshared = .; /* End of shareable data */ #endif + . = ALIGN(16); /* Exception table */ + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + .data : { /* Data */ *(.data) CONSTRUCTORS -- cgit v1.2.3 From 31cb4bd31a48f62105d037ad53192b94d4c08f53 Mon Sep 17 00:00:00 2001 From: Michael Holzheu Date: Mon, 5 Feb 2007 21:18:29 +0100 Subject: [S390] Hypervisor filesystem (s390_hypfs) for z/VM This is an extension of the already existing hypfs for LPAR (DIAG 204). Data returned by DIAG 2fc is exported using the s390_hypfs when Linux is running under z/VM. Information about cpus and memory is provided. Data is put into different virtual files which can be accessed from user space. All values are represented as ASCII strings Signed-off-by: Michael Holzheu Signed-off-by: Martin Schwidefsky --- arch/s390/hypfs/Makefile | 2 +- arch/s390/hypfs/hypfs.h | 9 ++ arch/s390/hypfs/hypfs_diag.h | 16 --- arch/s390/hypfs/hypfs_vm.c | 231 +++++++++++++++++++++++++++++++++++++++++++ arch/s390/hypfs/inode.c | 31 ++++-- 5 files changed, 262 insertions(+), 27 deletions(-) delete mode 100644 arch/s390/hypfs/hypfs_diag.h create mode 100644 arch/s390/hypfs/hypfs_vm.c (limited to 'arch') diff --git a/arch/s390/hypfs/Makefile b/arch/s390/hypfs/Makefile index f4b00cd81f7c..b08d2abf6178 100644 --- a/arch/s390/hypfs/Makefile +++ b/arch/s390/hypfs/Makefile @@ -4,4 +4,4 @@ obj-$(CONFIG_S390_HYPFS_FS) += s390_hypfs.o -s390_hypfs-objs := inode.o hypfs_diag.o +s390_hypfs-objs := inode.o hypfs_diag.o hypfs_vm.o diff --git a/arch/s390/hypfs/hypfs.h b/arch/s390/hypfs/hypfs.h index f3dbd91965c6..aea572009d60 100644 --- a/arch/s390/hypfs/hypfs.h +++ b/arch/s390/hypfs/hypfs.h @@ -27,4 +27,13 @@ extern struct dentry *hypfs_create_str(struct super_block *sb, struct dentry *dir, const char *name, char *string); +/* LPAR Hypervisor */ +extern int hypfs_diag_init(void); +extern void hypfs_diag_exit(void); +extern int hypfs_diag_create_files(struct super_block *sb, struct dentry *root); + +/* VM Hypervisor */ +extern int hypfs_vm_init(void); +extern int hypfs_vm_create_files(struct super_block *sb, struct dentry *root); + #endif /* _HYPFS_H_ */ diff --git a/arch/s390/hypfs/hypfs_diag.h b/arch/s390/hypfs/hypfs_diag.h deleted file mode 100644 index 256b384aebe1..000000000000 --- a/arch/s390/hypfs/hypfs_diag.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * arch/s390/hypfs_diag.h - * Hypervisor filesystem for Linux on s390. - * - * Copyright (C) IBM Corp. 2006 - * Author(s): Michael Holzheu - */ - -#ifndef _HYPFS_DIAG_H_ -#define _HYPFS_DIAG_H_ - -extern int hypfs_diag_init(void); -extern void hypfs_diag_exit(void); -extern int hypfs_diag_create_files(struct super_block *sb, struct dentry *root); - -#endif /* _HYPFS_DIAG_H_ */ diff --git a/arch/s390/hypfs/hypfs_vm.c b/arch/s390/hypfs/hypfs_vm.c new file mode 100644 index 000000000000..d01fc8f799f0 --- /dev/null +++ b/arch/s390/hypfs/hypfs_vm.c @@ -0,0 +1,231 @@ +/* + * Hypervisor filesystem for Linux on s390. z/VM implementation. + * + * Copyright (C) IBM Corp. 2006 + * Author(s): Michael Holzheu + */ + +#include +#include +#include +#include +#include +#include "hypfs.h" + +#define NAME_LEN 8 + +static char local_guest[] = " "; +static char all_guests[] = "* "; +static char *guest_query; + +struct diag2fc_data { + __u32 version; + __u32 flags; + __u64 used_cpu; + __u64 el_time; + __u64 mem_min_kb; + __u64 mem_max_kb; + __u64 mem_share_kb; + __u64 mem_used_kb; + __u32 pcpus; + __u32 lcpus; + __u32 vcpus; + __u32 cpu_min; + __u32 cpu_max; + __u32 cpu_shares; + __u32 cpu_use_samp; + __u32 cpu_delay_samp; + __u32 page_wait_samp; + __u32 idle_samp; + __u32 other_samp; + __u32 total_samp; + char guest_name[NAME_LEN]; +}; + +struct diag2fc_parm_list { + char userid[NAME_LEN]; + char aci_grp[NAME_LEN]; + __u64 addr; + __u32 size; + __u32 fmt; +}; + +static int diag2fc(int size, char* query, void *addr) +{ + unsigned long residual_cnt; + unsigned long rc; + struct diag2fc_parm_list parm_list; + + memcpy(parm_list.userid, query, NAME_LEN); + ASCEBC(parm_list.userid, NAME_LEN); + parm_list.addr = (unsigned long) addr ; + parm_list.size = size; + parm_list.fmt = 0x02; + memset(parm_list.aci_grp, 0x40, NAME_LEN); + rc = -1; + + asm volatile( + " diag %0,%1,0x2fc\n" + "0:\n" + EX_TABLE(0b,0b) + : "=d" (residual_cnt), "+d" (rc) : "0" (&parm_list) : "memory"); + + if ((rc != 0 ) && (rc != -2)) + return rc; + else + return -residual_cnt; +} + +static struct diag2fc_data *diag2fc_store(char *query, int *count) +{ + int size; + struct diag2fc_data *data; + + do { + size = diag2fc(0, query, NULL); + if (size < 0) + return ERR_PTR(-EACCES); + data = vmalloc(size); + if (!data) + return ERR_PTR(-ENOMEM); + if (diag2fc(size, query, data) == 0) + break; + vfree(data); + } while (1); + *count = (size / sizeof(*data)); + + return data; +} + +static void diag2fc_free(void *data) +{ + vfree(data); +} + +#define ATTRIBUTE(sb, dir, name, member) \ +do { \ + void *rc; \ + rc = hypfs_create_u64(sb, dir, name, member); \ + if (IS_ERR(rc)) \ + return PTR_ERR(rc); \ +} while(0) + +static int hpyfs_vm_create_guest(struct super_block *sb, + struct dentry *systems_dir, + struct diag2fc_data *data) +{ + char guest_name[NAME_LEN + 1] = {}; + struct dentry *guest_dir, *cpus_dir, *samples_dir, *mem_dir; + int dedicated_flag, capped_value; + + capped_value = (data->flags & 0x00000006) >> 1; + dedicated_flag = (data->flags & 0x00000008) >> 3; + + /* guest dir */ + memcpy(guest_name, data->guest_name, NAME_LEN); + EBCASC(guest_name, NAME_LEN); + strstrip(guest_name); + guest_dir = hypfs_mkdir(sb, systems_dir, guest_name); + if (IS_ERR(guest_dir)) + return PTR_ERR(guest_dir); + ATTRIBUTE(sb, guest_dir, "onlinetime_us", data->el_time); + + /* logical cpu information */ + cpus_dir = hypfs_mkdir(sb, guest_dir, "cpus"); + if (IS_ERR(cpus_dir)) + return PTR_ERR(cpus_dir); + ATTRIBUTE(sb, cpus_dir, "cputime_us", data->used_cpu); + ATTRIBUTE(sb, cpus_dir, "capped", capped_value); + ATTRIBUTE(sb, cpus_dir, "dedicated", dedicated_flag); + ATTRIBUTE(sb, cpus_dir, "count", data->vcpus); + ATTRIBUTE(sb, cpus_dir, "weight_min", data->cpu_min); + ATTRIBUTE(sb, cpus_dir, "weight_max", data->cpu_max); + ATTRIBUTE(sb, cpus_dir, "weight_cur", data->cpu_shares); + + /* memory information */ + mem_dir = hypfs_mkdir(sb, guest_dir, "mem"); + if (IS_ERR(mem_dir)) + return PTR_ERR(mem_dir); + ATTRIBUTE(sb, mem_dir, "min_KiB", data->mem_min_kb); + ATTRIBUTE(sb, mem_dir, "max_KiB", data->mem_max_kb); + ATTRIBUTE(sb, mem_dir, "used_KiB", data->mem_used_kb); + ATTRIBUTE(sb, mem_dir, "share_KiB", data->mem_share_kb); + + /* samples */ + samples_dir = hypfs_mkdir(sb, guest_dir, "samples"); + if (IS_ERR(samples_dir)) + return PTR_ERR(samples_dir); + ATTRIBUTE(sb, samples_dir, "cpu_using", data->cpu_use_samp); + ATTRIBUTE(sb, samples_dir, "cpu_delay", data->cpu_delay_samp); + ATTRIBUTE(sb, samples_dir, "mem_delay", data->page_wait_samp); + ATTRIBUTE(sb, samples_dir, "idle", data->idle_samp); + ATTRIBUTE(sb, samples_dir, "other", data->other_samp); + ATTRIBUTE(sb, samples_dir, "total", data->total_samp); + return 0; +} + +int hypfs_vm_create_files(struct super_block *sb, struct dentry *root) +{ + struct dentry *dir, *file; + struct diag2fc_data *data; + int rc, i, count = 0; + + data = diag2fc_store(guest_query, &count); + if (IS_ERR(data)) + return PTR_ERR(data); + + /* Hpervisor Info */ + dir = hypfs_mkdir(sb, root, "hyp"); + if (IS_ERR(dir)) { + rc = PTR_ERR(dir); + goto failed; + } + file = hypfs_create_str(sb, dir, "type", "z/VM Hypervisor"); + if (IS_ERR(file)) { + rc = PTR_ERR(file); + goto failed; + } + + /* physical cpus */ + dir = hypfs_mkdir(sb, root, "cpus"); + if (IS_ERR(dir)) { + rc = PTR_ERR(dir); + goto failed; + } + file = hypfs_create_u64(sb, dir, "count", data->lcpus); + if (IS_ERR(file)) { + rc = PTR_ERR(file); + goto failed; + } + + /* guests */ + dir = hypfs_mkdir(sb, root, "systems"); + if (IS_ERR(dir)) { + rc = PTR_ERR(dir); + goto failed; + } + + for (i = 0; i < count; i++) { + rc = hpyfs_vm_create_guest(sb, dir, &(data[i])); + if (rc) + goto failed; + } + diag2fc_free(data); + return 0; + +failed: + diag2fc_free(data); + return rc; +} + +int hypfs_vm_init(void) +{ + if (diag2fc(0, all_guests, NULL) > 0) + guest_query = all_guests; + else if (diag2fc(0, local_guest, NULL) > 0) + guest_query = local_guest; + else + return -EACCES; + + return 0; +} diff --git a/arch/s390/hypfs/inode.c b/arch/s390/hypfs/inode.c index b6716c4b9934..a4fda7b53640 100644 --- a/arch/s390/hypfs/inode.c +++ b/arch/s390/hypfs/inode.c @@ -19,7 +19,6 @@ #include #include #include "hypfs.h" -#include "hypfs_diag.h" #define HYPFS_MAGIC 0x687970 /* ASCII 'hyp' */ #define TMP_SIZE 64 /* size of temporary buffers */ @@ -192,7 +191,10 @@ static ssize_t hypfs_aio_write(struct kiocb *iocb, const struct iovec *iov, goto out; } hypfs_delete_tree(sb->s_root); - rc = hypfs_diag_create_files(sb, sb->s_root); + if (MACHINE_IS_VM) + rc = hypfs_vm_create_files(sb, sb->s_root); + else + rc = hypfs_diag_create_files(sb, sb->s_root); if (rc) { printk(KERN_ERR "hypfs: Update failed\n"); hypfs_delete_tree(sb->s_root); @@ -289,7 +291,10 @@ static int hypfs_fill_super(struct super_block *sb, void *data, int silent) rc = -ENOMEM; goto err_alloc; } - rc = hypfs_diag_create_files(sb, root_dentry); + if (MACHINE_IS_VM) + rc = hypfs_vm_create_files(sb, root_dentry); + else + rc = hypfs_diag_create_files(sb, root_dentry); if (rc) goto err_tree; sbi->update_file = hypfs_create_update_file(sb, root_dentry); @@ -462,11 +467,15 @@ static int __init hypfs_init(void) { int rc; - if (MACHINE_IS_VM) - return -ENODATA; - if (hypfs_diag_init()) { - rc = -ENODATA; - goto fail_diag; + if (MACHINE_IS_VM) { + if (hypfs_vm_init()) + /* no diag 2fc, just exit */ + return -ENODATA; + } else { + if (hypfs_diag_init()) { + rc = -ENODATA; + goto fail_diag; + } } kset_set_kset_s(&s390_subsys, hypervisor_subsys); rc = subsystem_register(&s390_subsys); @@ -480,7 +489,8 @@ static int __init hypfs_init(void) fail_filesystem: subsystem_unregister(&s390_subsys); fail_sysfs: - hypfs_diag_exit(); + if (!MACHINE_IS_VM) + hypfs_diag_exit(); fail_diag: printk(KERN_ERR "hypfs: Initialization failed with rc = %i.\n", rc); return rc; @@ -488,7 +498,8 @@ fail_diag: static void __exit hypfs_exit(void) { - hypfs_diag_exit(); + if (!MACHINE_IS_VM) + hypfs_diag_exit(); unregister_filesystem(&hypfs_type); subsystem_unregister(&s390_subsys); } -- cgit v1.2.3 From 31ee4b2f40994e8b21691f85cdd4052551a789b7 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Mon, 5 Feb 2007 21:18:31 +0100 Subject: [S390] Calibrate delay and bogomips. Preset the bogomips number to the cpu capacity value reported by store system information in SYSIB 1.2.2. This value is constant for a particular machine model and can be used to determine relative performance differences between machines. Signed-off-by: Martin Schwidefsky --- arch/s390/Kconfig | 4 --- arch/s390/kernel/setup.c | 1 + arch/s390/lib/Makefile | 2 +- arch/s390/lib/qrnnd.S | 77 +++++++++++++++++++++++++++++++++++++++++++ arch/s390/math-emu/Makefile | 2 +- arch/s390/math-emu/math.c | 2 +- arch/s390/math-emu/qrnnd.S | 77 ------------------------------------------- arch/s390/math-emu/sfp-util.h | 66 ------------------------------------- 8 files changed, 81 insertions(+), 150 deletions(-) create mode 100644 arch/s390/lib/qrnnd.S delete mode 100644 arch/s390/math-emu/qrnnd.S delete mode 100644 arch/s390/math-emu/sfp-util.h (limited to 'arch') diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index 5c7e981c115b..eaed402ad346 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -34,10 +34,6 @@ config GENERIC_HWEIGHT bool default y -config GENERIC_CALIBRATE_DELAY - bool - default y - config GENERIC_TIME def_bool y diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index 2569aafcc543..2fa866f6f711 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -938,6 +938,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) struct cpuinfo_S390 *cpuinfo; unsigned long n = (unsigned long) v - 1; + s390_adjust_jiffies(); preempt_disable(); if (!n) { seq_printf(m, "vendor_id : IBM/S390\n" diff --git a/arch/s390/lib/Makefile b/arch/s390/lib/Makefile index b5f94cf3bde8..7a44fed21b35 100644 --- a/arch/s390/lib/Makefile +++ b/arch/s390/lib/Makefile @@ -4,7 +4,7 @@ EXTRA_AFLAGS := -traditional -lib-y += delay.o string.o uaccess_std.o uaccess_pt.o +lib-y += delay.o string.o uaccess_std.o uaccess_pt.o qrnnd.o lib-$(CONFIG_32BIT) += div64.o lib-$(CONFIG_64BIT) += uaccess_mvcos.o lib-$(CONFIG_SMP) += spinlock.o diff --git a/arch/s390/lib/qrnnd.S b/arch/s390/lib/qrnnd.S new file mode 100644 index 000000000000..eb1df632e749 --- /dev/null +++ b/arch/s390/lib/qrnnd.S @@ -0,0 +1,77 @@ +# S/390 __udiv_qrnnd + +# r2 : &__r +# r3 : upper half of 64 bit word n +# r4 : lower half of 64 bit word n +# r5 : divisor d +# the reminder r of the division is to be stored to &__r and +# the quotient q is to be returned + + .text + .globl __udiv_qrnnd +__udiv_qrnnd: + st %r2,24(%r15) # store pointer to reminder for later + lr %r0,%r3 # reload n + lr %r1,%r4 + ltr %r2,%r5 # reload and test divisor + jp 5f + # divisor >= 0x80000000 + srdl %r0,2 # n/4 + srl %r2,1 # d/2 + slr %r1,%r2 # special case if last bit of d is set + brc 3,0f # (n/4) div (n/2) can overflow by 1 + ahi %r0,-1 # trick: subtract n/2, then divide +0: dr %r0,%r2 # signed division + ahi %r1,1 # trick part 2: add 1 to the quotient + # now (n >> 2) = (d >> 1) * %r1 + %r0 + lhi %r3,1 + nr %r3,%r1 # test last bit of q + jz 1f + alr %r0,%r2 # add (d>>1) to r +1: srl %r1,1 # q >>= 1 + # now (n >> 2) = (d&-2) * %r1 + %r0 + lhi %r3,1 + nr %r3,%r5 # test last bit of d + jz 2f + slr %r0,%r1 # r -= q + brc 3,2f # borrow ? + alr %r0,%r5 # r += d + ahi %r1,-1 +2: # now (n >> 2) = d * %r1 + %r0 + alr %r1,%r1 # q <<= 1 + alr %r0,%r0 # r <<= 1 + brc 12,3f # overflow on r ? + slr %r0,%r5 # r -= d + ahi %r1,1 # q += 1 +3: lhi %r3,2 + nr %r3,%r4 # test next to last bit of n + jz 4f + ahi %r0,1 # r += 1 +4: clr %r0,%r5 # r >= d ? + jl 6f + slr %r0,%r5 # r -= d + ahi %r1,1 # q += 1 + # now (n >> 1) = d * %r1 + %r0 + j 6f +5: # divisor < 0x80000000 + srdl %r0,1 + dr %r0,%r2 # signed division + # now (n >> 1) = d * %r1 + %r0 +6: alr %r1,%r1 # q <<= 1 + alr %r0,%r0 # r <<= 1 + brc 12,7f # overflow on r ? + slr %r0,%r5 # r -= d + ahi %r1,1 # q += 1 +7: lhi %r3,1 + nr %r3,%r4 # isolate last bit of n + alr %r0,%r3 # r += (n & 1) + clr %r0,%r5 # r >= d ? + jl 8f + slr %r0,%r5 # r -= d + ahi %r1,1 # q += 1 +8: # now n = d * %r1 + %r0 + l %r2,24(%r15) + st %r0,0(%r2) + lr %r2,%r1 + br %r14 + .end __udiv_qrnnd diff --git a/arch/s390/math-emu/Makefile b/arch/s390/math-emu/Makefile index c10df144f2ab..73b3e72efc46 100644 --- a/arch/s390/math-emu/Makefile +++ b/arch/s390/math-emu/Makefile @@ -2,7 +2,7 @@ # Makefile for the FPU instruction emulation. # -obj-$(CONFIG_MATHEMU) := math.o qrnnd.o +obj-$(CONFIG_MATHEMU) := math.o EXTRA_CFLAGS := -I$(src) -Iinclude/math-emu -w EXTRA_AFLAGS := -traditional diff --git a/arch/s390/math-emu/math.c b/arch/s390/math-emu/math.c index 6b9aec5a2c18..3ee78ccb617d 100644 --- a/arch/s390/math-emu/math.c +++ b/arch/s390/math-emu/math.c @@ -15,7 +15,7 @@ #include #include -#include "sfp-util.h" +#include #include #include #include diff --git a/arch/s390/math-emu/qrnnd.S b/arch/s390/math-emu/qrnnd.S deleted file mode 100644 index b01c2b648e22..000000000000 --- a/arch/s390/math-emu/qrnnd.S +++ /dev/null @@ -1,77 +0,0 @@ -# S/390 __udiv_qrnnd - -# r2 : &__r -# r3 : upper half of 64 bit word n -# r4 : lower half of 64 bit word n -# r5 : divisor d -# the reminder r of the division is to be stored to &__r and -# the quotient q is to be returned - - .text - .globl __udiv_qrnnd -__udiv_qrnnd: - st %r2,24(%r15) # store pointer to reminder for later - lr %r0,%r3 # reload n - lr %r1,%r4 - ltr %r2,%r5 # reload and test divisor - jp 5f - # divisor >= 0x80000000 - srdl %r0,2 # n/4 - srl %r2,1 # d/2 - slr %r1,%r2 # special case if last bit of d is set - brc 3,0f # (n/4) div (n/2) can overflow by 1 - ahi %r0,-1 # trick: subtract n/2, then divide -0: dr %r0,%r2 # signed division - ahi %r1,1 # trick part 2: add 1 to the quotient - # now (n >> 2) = (d >> 1) * %r1 + %r0 - lhi %r3,1 - nr %r3,%r1 # test last bit of q - jz 1f - alr %r0,%r2 # add (d>>1) to r -1: srl %r1,1 # q >>= 1 - # now (n >> 2) = (d&-2) * %r1 + %r0 - lhi %r3,1 - nr %r3,%r5 # test last bit of d - jz 2f - slr %r0,%r1 # r -= q - brc 3,2f # borrow ? - alr %r0,%r5 # r += d - ahi %r1,-1 -2: # now (n >> 2) = d * %r1 + %r0 - alr %r1,%r1 # q <<= 1 - alr %r0,%r0 # r <<= 1 - brc 12,3f # overflow on r ? - slr %r0,%r5 # r -= d - ahi %r1,1 # q += 1 -3: lhi %r3,2 - nr %r3,%r4 # test next to last bit of n - jz 4f - ahi %r0,1 # r += 1 -4: clr %r0,%r5 # r >= d ? - jl 6f - slr %r0,%r5 # r -= d - ahi %r1,1 # q += 1 - # now (n >> 1) = d * %r1 + %r0 - j 6f -5: # divisor < 0x80000000 - srdl %r0,1 - dr %r0,%r2 # signed division - # now (n >> 1) = d * %r1 + %r0 -6: alr %r1,%r1 # q <<= 1 - alr %r0,%r0 # r <<= 1 - brc 12,7f # overflow on r ? - slr %r0,%r5 # r -= d - ahi %r1,1 # q += 1 -7: lhi %r3,1 - nr %r3,%r4 # isolate last bit of n - alr %r0,%r3 # r += (n & 1) - clr %r0,%r5 # r >= d ? - jl 8f - slr %r0,%r5 # r -= d - ahi %r1,1 # q += 1 -8: # now n = d * %r1 + %r0 - l %r2,24(%r15) - st %r0,0(%r2) - lr %r2,%r1 - br %r14 - .end __udiv_qrnnd diff --git a/arch/s390/math-emu/sfp-util.h b/arch/s390/math-emu/sfp-util.h deleted file mode 100644 index 5b6ca4570ea4..000000000000 --- a/arch/s390/math-emu/sfp-util.h +++ /dev/null @@ -1,66 +0,0 @@ -#include -#include -#include -#include - -#define add_ssaaaa(sh, sl, ah, al, bh, bl) ({ \ - unsigned int __sh = (ah); \ - unsigned int __sl = (al); \ - asm volatile( \ - " alr %1,%3\n" \ - " brc 12,0f\n" \ - " ahi %0,1\n" \ - "0: alr %0,%2" \ - : "+&d" (__sh), "+d" (__sl) \ - : "d" (bh), "d" (bl) : "cc"); \ - (sh) = __sh; \ - (sl) = __sl; \ -}) - -#define sub_ddmmss(sh, sl, ah, al, bh, bl) ({ \ - unsigned int __sh = (ah); \ - unsigned int __sl = (al); \ - asm volatile( \ - " slr %1,%3\n" \ - " brc 3,0f\n" \ - " ahi %0,-1\n" \ - "0: slr %0,%2" \ - : "+&d" (__sh), "+d" (__sl) \ - : "d" (bh), "d" (bl) : "cc"); \ - (sh) = __sh; \ - (sl) = __sl; \ -}) - -/* a umul b = a mul b + (a>=2<<31) ? b<<32:0 + (b>=2<<31) ? a<<32:0 */ -#define umul_ppmm(wh, wl, u, v) ({ \ - unsigned int __wh = u; \ - unsigned int __wl = v; \ - asm volatile( \ - " ltr 1,%0\n" \ - " mr 0,%1\n" \ - " jnm 0f\n" \ - " alr 0,%1\n" \ - "0: ltr %1,%1\n" \ - " jnm 1f\n" \ - " alr 0,%0\n" \ - "1: lr %0,0\n" \ - " lr %1,1\n" \ - : "+d" (__wh), "+d" (__wl) \ - : : "0", "1", "cc"); \ - wh = __wh; \ - wl = __wl; \ -}) - -#define udiv_qrnnd(q, r, n1, n0, d) \ - do { unsigned long __r; \ - (q) = __udiv_qrnnd (&__r, (n1), (n0), (d)); \ - (r) = __r; \ - } while (0) -extern unsigned long __udiv_qrnnd (unsigned long *, unsigned long, - unsigned long , unsigned long); - -#define UDIV_NEEDS_NORMALIZATION 0 - -#define abort() return 0 - -#define __BYTE_ORDER __BIG_ENDIAN -- cgit v1.2.3 From ab14de6c37fae22911ba99f4171613e6d758050b Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 5 Feb 2007 21:18:37 +0100 Subject: [S390] Convert memory detection into C code. Hopefully this will make it more maintainable and less error prone. Code makes use of search_exception_tables(). Since it calls this function before the kernel exeception table is sorted, there is an early call to sort_main_extable(). This way it's easy to use the already present infrastructure of fixup sections. Also this would allows to easily convert the rest of head[31|64].S into C code. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/defconfig | 1 - arch/s390/kernel/Makefile | 2 +- arch/s390/kernel/base.S | 150 ++++++++++++++++++++++ arch/s390/kernel/early.c | 307 ++++++++++++++++++++++++++++++++++++++++++++++ arch/s390/kernel/head31.S | 164 +------------------------ arch/s390/kernel/head64.S | 175 -------------------------- arch/s390/kernel/ipl.c | 15 +-- arch/s390/kernel/reset.S | 90 -------------- arch/s390/kernel/setup.c | 134 -------------------- 9 files changed, 467 insertions(+), 571 deletions(-) create mode 100644 arch/s390/kernel/base.S create mode 100644 arch/s390/kernel/early.c delete mode 100644 arch/s390/kernel/reset.S (limited to 'arch') diff --git a/arch/s390/defconfig b/arch/s390/defconfig index dbe3df4b0dab..7c621b8ef683 100644 --- a/arch/s390/defconfig +++ b/arch/s390/defconfig @@ -433,7 +433,6 @@ CONFIG_TN3270_CONSOLE=y CONFIG_TN3215=y CONFIG_TN3215_CONSOLE=y CONFIG_CCW_CONSOLE=y -CONFIG_SCLP=y CONFIG_SCLP_TTY=y CONFIG_SCLP_CONSOLE=y CONFIG_SCLP_VT220_TTY=y diff --git a/arch/s390/kernel/Makefile b/arch/s390/kernel/Makefile index 2de811a71a39..5492d25d7d69 100644 --- a/arch/s390/kernel/Makefile +++ b/arch/s390/kernel/Makefile @@ -4,7 +4,7 @@ EXTRA_AFLAGS := -traditional -obj-y := bitmap.o traps.o time.o process.o reset.o \ +obj-y := bitmap.o traps.o time.o process.o base.o early.o \ setup.o sys_s390.o ptrace.o signal.o cpcmd.o ebcdic.o \ semaphore.o s390_ext.o debug.o irq.o ipl.o diff --git a/arch/s390/kernel/base.S b/arch/s390/kernel/base.S new file mode 100644 index 000000000000..dc7e5259770f --- /dev/null +++ b/arch/s390/kernel/base.S @@ -0,0 +1,150 @@ +/* + * arch/s390/kernel/base.S + * + * Copyright IBM Corp. 2006,2007 + * Author(s): Heiko Carstens + * Michael Holzheu + */ + +#include +#include + +#ifdef CONFIG_64BIT + + .globl s390_base_mcck_handler +s390_base_mcck_handler: + basr %r13,0 +0: lg %r15,__LC_PANIC_STACK # load panic stack + aghi %r15,-STACK_FRAME_OVERHEAD + larl %r1,s390_base_mcck_handler_fn + lg %r1,0(%r1) + ltgr %r1,%r1 + jz 1f + basr %r14,%r1 +1: la %r1,4095 + lmg %r0,%r15,__LC_GPREGS_SAVE_AREA-4095(%r1) + lpswe __LC_MCK_OLD_PSW + + .section .bss + .globl s390_base_mcck_handler_fn +s390_base_mcck_handler_fn: + .quad 0 + .previous + + .globl s390_base_ext_handler +s390_base_ext_handler: + stmg %r0,%r15,__LC_SAVE_AREA + basr %r13,0 +0: aghi %r15,-STACK_FRAME_OVERHEAD + larl %r1,s390_base_ext_handler_fn + lg %r1,0(%r1) + ltgr %r1,%r1 + jz 1f + basr %r14,%r1 +1: lmg %r0,%r15,__LC_SAVE_AREA + ni __LC_EXT_OLD_PSW+1,0xfd # clear wait state bit + lpswe __LC_EXT_OLD_PSW + + .section .bss + .globl s390_base_ext_handler_fn +s390_base_ext_handler_fn: + .quad 0 + .previous + + .globl s390_base_pgm_handler +s390_base_pgm_handler: + stmg %r0,%r15,__LC_SAVE_AREA + basr %r13,0 +0: aghi %r15,-STACK_FRAME_OVERHEAD + larl %r1,s390_base_pgm_handler_fn + lg %r1,0(%r1) + ltgr %r1,%r1 + jz 1f + basr %r14,%r1 + lmg %r0,%r15,__LC_SAVE_AREA + lpswe __LC_PGM_OLD_PSW +1: lpswe disabled_wait_psw-0b(%r13) + + .align 8 +disabled_wait_psw: + .quad 0x0002000180000000,0x0000000000000000 + s390_base_pgm_handler + + .section .bss + .globl s390_base_pgm_handler_fn +s390_base_pgm_handler_fn: + .quad 0 + .previous + +#else /* CONFIG_64BIT */ + + .globl s390_base_mcck_handler +s390_base_mcck_handler: + basr %r13,0 +0: l %r15,__LC_PANIC_STACK # load panic stack + ahi %r15,-STACK_FRAME_OVERHEAD + l %r1,2f-0b(%r13) + l %r1,0(%r1) + ltr %r1,%r1 + jz 1f + basr %r14,%r1 +1: lm %r0,%r15,__LC_GPREGS_SAVE_AREA + lpsw __LC_MCK_OLD_PSW + +2: .long s390_base_mcck_handler_fn + + .section .bss + .globl s390_base_mcck_handler_fn +s390_base_mcck_handler_fn: + .long 0 + .previous + + .globl s390_base_ext_handler +s390_base_ext_handler: + stm %r0,%r15,__LC_SAVE_AREA + basr %r13,0 +0: ahi %r15,-STACK_FRAME_OVERHEAD + l %r1,2f-0b(%r13) + l %r1,0(%r1) + ltr %r1,%r1 + jz 1f + basr %r14,%r1 +1: lm %r0,%r15,__LC_SAVE_AREA + ni __LC_EXT_OLD_PSW+1,0xfd # clear wait state bit + lpsw __LC_EXT_OLD_PSW + +2: .long s390_base_ext_handler_fn + + .section .bss + .globl s390_base_ext_handler_fn +s390_base_ext_handler_fn: + .long 0 + .previous + + .globl s390_base_pgm_handler +s390_base_pgm_handler: + stm %r0,%r15,__LC_SAVE_AREA + basr %r13,0 +0: ahi %r15,-STACK_FRAME_OVERHEAD + l %r1,2f-0b(%r13) + l %r1,0(%r1) + ltr %r1,%r1 + jz 1f + basr %r14,%r1 + lm %r0,%r15,__LC_SAVE_AREA + lpsw __LC_PGM_OLD_PSW + +1: lpsw disabled_wait_psw-0b(%r13) + +2: .long s390_base_pgm_handler_fn + +disabled_wait_psw: + .align 8 + .long 0x000a0000,0x00000000 + s390_base_pgm_handler + + .section .bss + .globl s390_base_pgm_handler_fn +s390_base_pgm_handler_fn: + .long 0 + .previous + +#endif /* CONFIG_64BIT */ diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c new file mode 100644 index 000000000000..40dd47970a33 --- /dev/null +++ b/arch/s390/kernel/early.c @@ -0,0 +1,307 @@ +/* + * arch/s390/kernel/early.c + * + * Copyright IBM Corp. 2007 + * Author(s): Hongjie Yang , + * Heiko Carstens + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * Create a Kernel NSS if the SAVESYS= parameter is defined + */ +#define DEFSYS_CMD_SIZE 96 +#define SAVESYS_CMD_SIZE 32 + +extern int _eshared; +char kernel_nss_name[NSS_NAME_SIZE + 1]; + +#ifdef CONFIG_SHARED_KERNEL +static noinline __init void create_kernel_nss(void) +{ + unsigned int i, stext_pfn, eshared_pfn, end_pfn, min_size; +#ifdef CONFIG_BLK_DEV_INITRD + unsigned int sinitrd_pfn, einitrd_pfn; +#endif + int response; + char *savesys_ptr; + char upper_command_line[COMMAND_LINE_SIZE]; + char defsys_cmd[DEFSYS_CMD_SIZE]; + char savesys_cmd[SAVESYS_CMD_SIZE]; + + /* Do nothing if we are not running under VM */ + if (!MACHINE_IS_VM) + return; + + /* Convert COMMAND_LINE to upper case */ + for (i = 0; i < strlen(COMMAND_LINE); i++) + upper_command_line[i] = toupper(COMMAND_LINE[i]); + + savesys_ptr = strstr(upper_command_line, "SAVESYS="); + + if (!savesys_ptr) + return; + + savesys_ptr += 8; /* Point to the beginning of the NSS name */ + for (i = 0; i < NSS_NAME_SIZE; i++) { + if (savesys_ptr[i] == ' ' || savesys_ptr[i] == '\0') + break; + kernel_nss_name[i] = savesys_ptr[i]; + } + + stext_pfn = PFN_DOWN(__pa(&_stext)); + eshared_pfn = PFN_DOWN(__pa(&_eshared)); + end_pfn = PFN_UP(__pa(&_end)); + min_size = end_pfn << 2; + + sprintf(defsys_cmd, "DEFSYS %s 00000-%.5X EW %.5X-%.5X SR %.5X-%.5X", + kernel_nss_name, stext_pfn - 1, stext_pfn, eshared_pfn - 1, + eshared_pfn, end_pfn); + +#ifdef CONFIG_BLK_DEV_INITRD + if (INITRD_START && INITRD_SIZE) { + sinitrd_pfn = PFN_DOWN(__pa(INITRD_START)); + einitrd_pfn = PFN_UP(__pa(INITRD_START + INITRD_SIZE)); + min_size = einitrd_pfn << 2; + sprintf(defsys_cmd, "%s EW %.5X-%.5X", defsys_cmd, + sinitrd_pfn, einitrd_pfn); + } +#endif + + sprintf(defsys_cmd, "%s EW MINSIZE=%.7iK", defsys_cmd, min_size); + sprintf(savesys_cmd, "SAVESYS %s \n IPL %s", + kernel_nss_name, kernel_nss_name); + + __cpcmd(defsys_cmd, NULL, 0, &response); + + if (response != 0) + return; + + __cpcmd(savesys_cmd, NULL, 0, &response); + + if (response != strlen(savesys_cmd)) + return; + + ipl_flags = IPL_NSS_VALID; +} + +#else /* CONFIG_SHARED_KERNEL */ + +static inline void create_kernel_nss(void) { } + +#endif /* CONFIG_SHARED_KERNEL */ + +/* + * Clear bss memory + */ +static noinline __init void clear_bss_section(void) +{ + memset(__bss_start, 0, _end - __bss_start); +} + +/* + * Initialize storage key for kernel pages + */ +static noinline __init void init_kernel_storage_key(void) +{ + unsigned long end_pfn, init_pfn; + + end_pfn = PFN_UP(__pa(&_end)); + + for (init_pfn = 0 ; init_pfn < end_pfn; init_pfn++) + page_set_storage_key(init_pfn << PAGE_SHIFT, PAGE_DEFAULT_KEY); +} + +static noinline __init void detect_machine_type(void) +{ + struct cpuinfo_S390 *cpuinfo = &S390_lowcore.cpu_data; + + asm volatile("stidp %0" : "=m" (S390_lowcore.cpu_data.cpu_id)); + + /* Running under z/VM ? */ + if (cpuinfo->cpu_id.version == 0xff) + machine_flags |= 1; + + /* Running on a P/390 ? */ + if (cpuinfo->cpu_id.machine == 0x7490) + machine_flags |= 4; +} + +static noinline __init int memory_fast_detect(void) +{ + + unsigned long val0 = 0; + unsigned long val1 = 0xc; + int ret = -ENOSYS; + + if (ipl_flags & IPL_NSS_VALID) + return -ENOSYS; + + asm volatile( + " diag %1,%2,0x260\n" + "0: lhi %0,0\n" + "1:\n" + EX_TABLE(0b,1b) + : "+d" (ret), "+d" (val0), "+d" (val1) : : "cc"); + + if (ret || val0 != val1) + return -ENOSYS; + + memory_chunk[0].size = val0; + return 0; +} + +#define ADDR2G (1UL << 31) + +static noinline __init unsigned long sclp_memory_detect(void) +{ + struct sclp_readinfo_sccb *sccb; + unsigned long long memsize; + + sccb = &s390_readinfo_sccb; + + if (sccb->header.response_code != 0x10) + return 0; + + if (sccb->rnsize) + memsize = sccb->rnsize << 20; + else + memsize = sccb->rnsize2 << 20; + if (sccb->rnmax) + memsize *= sccb->rnmax; + else + memsize *= sccb->rnmax2; +#ifndef CONFIG_64BIT + /* + * Can't deal with more than 2G in 31 bit addressing mode, so + * limit the value in order to avoid strange side effects. + */ + if (memsize > ADDR2G) + memsize = ADDR2G; +#endif + return (unsigned long) memsize; +} + +static inline __init unsigned long __tprot(unsigned long addr) +{ + int cc = -1; + + asm volatile( + " tprot 0(%1),0\n" + "0: ipm %0\n" + " srl %0,28\n" + "1:\n" + EX_TABLE(0b,1b) + : "+d" (cc) : "a" (addr) : "cc"); + return (unsigned long)cc; +} + +/* Checking memory in 128KB increments. */ +#define CHUNK_INCR (1UL << 17) + +static noinline __init void find_memory_chunks(unsigned long memsize) +{ + unsigned long addr = 0, old_addr = 0; + unsigned long old_cc = CHUNK_READ_WRITE; + unsigned long cc; + int chunk = 0; + + while (chunk < MEMORY_CHUNKS) { + cc = __tprot(addr); + while (cc == old_cc) { + addr += CHUNK_INCR; + cc = __tprot(addr); +#ifndef CONFIG_64BIT + if (addr == ADDR2G) + break; +#endif + } + + if (old_addr != addr && + (old_cc == CHUNK_READ_WRITE || old_cc == CHUNK_READ_ONLY)) { + memory_chunk[chunk].addr = old_addr; + memory_chunk[chunk].size = addr - old_addr; + memory_chunk[chunk].type = old_cc; + chunk++; + } + + old_addr = addr; + old_cc = cc; + +#ifndef CONFIG_64BIT + if (addr == ADDR2G) + break; +#endif + /* + * Finish memory detection at the first hole, unless + * - we reached the hsa -> skip it. + * - we know there must be more. + */ + if (cc == -1UL && !memsize && old_addr != ADDR2G) + break; + if (memsize && addr >= memsize) + break; + } +} + +static __init void early_pgm_check_handler(void) +{ + unsigned long addr; + const struct exception_table_entry *fixup; + + addr = S390_lowcore.program_old_psw.addr; + fixup = search_exception_tables(addr & PSW_ADDR_INSN); + if (!fixup) + disabled_wait(0); + S390_lowcore.program_old_psw.addr = fixup->fixup | PSW_ADDR_AMODE; +} + +static noinline __init void setup_lowcore_early(void) +{ + psw_t psw; + + psw.mask = PSW_BASE_BITS | PSW_DEFAULT_KEY; + psw.addr = PSW_ADDR_AMODE | (unsigned long) s390_base_ext_handler; + S390_lowcore.external_new_psw = psw; + psw.addr = PSW_ADDR_AMODE | (unsigned long) s390_base_pgm_handler; + S390_lowcore.program_new_psw = psw; + s390_base_pgm_handler_fn = early_pgm_check_handler; +} + +/* + * Save ipl parameters, clear bss memory, initialize storage keys + * and create a kernel NSS at startup if the SAVESYS= parm is defined + */ +void __init startup_init(void) +{ + unsigned long memsize; + + ipl_save_parameters(); + clear_bss_section(); + init_kernel_storage_key(); + lockdep_init(); + lockdep_off(); + detect_machine_type(); + create_kernel_nss(); + sort_main_extable(); + setup_lowcore_early(); + sclp_readinfo_early(); + memsize = sclp_memory_detect(); + if (memory_fast_detect() < 0) + find_memory_chunks(memsize); + lockdep_on(); +} diff --git a/arch/s390/kernel/head31.S b/arch/s390/kernel/head31.S index b3dcdcdc80c0..453fd3b4edea 100644 --- a/arch/s390/kernel/head31.S +++ b/arch/s390/kernel/head31.S @@ -58,145 +58,6 @@ startup_continue: l %r14,.Lstartup_init-.LPG1(%r13) basr %r14,%r14 - l %r2,.Lrcp-.LPG1(%r13) # Read SCP forced command word -.Lservicecall: - stosm .Lpmask-.LPG1(%r13),0x01 # authorize ext interrupts - - stctl %r0, %r0,.Lcr-.LPG1(%r13) # get cr0 - la %r1,0x200 # set bit 22 - o %r1,.Lcr-.LPG1(%r13) # or old cr0 with r1 - st %r1,.Lcr-.LPG1(%r13) - lctl %r0, %r0,.Lcr-.LPG1(%r13) # load modified cr0 - - mvc __LC_EXT_NEW_PSW(8),.Lpcext-.LPG1(%r13) # set postcall psw - la %r1, .Lsclph-.LPG1(%r13) - a %r1,__LC_EXT_NEW_PSW+4 # set handler - st %r1,__LC_EXT_NEW_PSW+4 - - l %r4,.Lsccbaddr-.LPG1(%r13) # %r4 is our index for sccb stuff - lr %r1,%r4 # our sccb - .insn rre,0xb2200000,%r2,%r1 # service call - ipm %r1 - srl %r1,28 # get cc code - xr %r3, %r3 - chi %r1,3 - be .Lfchunk-.LPG1(%r13) # leave - chi %r1,2 - be .Lservicecall-.LPG1(%r13) - lpsw .Lwaitsclp-.LPG1(%r13) -.Lsclph: - lh %r1,.Lsccbr-.Lsccb(%r4) - chi %r1,0x10 # 0x0010 is the sucess code - je .Lprocsccb # let's process the sccb - chi %r1,0x1f0 - bne .Lfchunk-.LPG1(%r13) # unhandled error code - c %r2, .Lrcp-.LPG1(%r13) # Did we try Read SCP forced - bne .Lfchunk-.LPG1(%r13) # if no, give up - l %r2, .Lrcp2-.LPG1(%r13) # try with Read SCP - b .Lservicecall-.LPG1(%r13) -.Lprocsccb: - lhi %r1,0 - icm %r1,3,.Lscpincr1-.Lsccb(%r4) # use this one if != 0 - jnz .Lscnd - lhi %r1,0x800 # otherwise report 2GB -.Lscnd: - lhi %r3,0x800 # limit reported memory size to 2GB - cr %r1,%r3 - jl .Lno2gb - lr %r1,%r3 -.Lno2gb: - xr %r3,%r3 # same logic - ic %r3,.Lscpa1-.Lsccb(%r4) - chi %r3,0x00 - jne .Lcompmem - l %r3,.Lscpa2-.Lsccb(%r4) -.Lcompmem: - mr %r2,%r1 # mem in MB on 128-bit - l %r1,.Lonemb-.LPG1(%r13) - mr %r2,%r1 # mem size in bytes in %r3 - b .Lfchunk-.LPG1(%r13) - - .align 4 -.Linittu: - .long init_thread_union -.Lstartup_init: - .long startup_init -.Lpmask: - .byte 0 - .align 8 -.Lpcext:.long 0x00080000,0x80000000 -.Lcr: - .long 0x00 # place holder for cr0 - .align 8 -.Lwaitsclp: - .long 0x010a0000,0x80000000 + .Lsclph -.Lrcp: - .int 0x00120001 # Read SCP forced code -.Lrcp2: - .int 0x00020001 # Read SCP code -.Lonemb: - .int 0x100000 -.Lfchunk: - -# -# find memory chunks. -# - lr %r9,%r3 # end of mem - mvc __LC_PGM_NEW_PSW(8),.Lpcmem-.LPG1(%r13) - la %r1,1 # test in increments of 128KB - sll %r1,17 - l %r3,.Lmchunk-.LPG1(%r13) # get pointer to memory_chunk array - slr %r4,%r4 # set start of chunk to zero - slr %r5,%r5 # set end of chunk to zero - slr %r6,%r6 # set access code to zero - la %r10,MEMORY_CHUNKS # number of chunks -.Lloop: - tprot 0(%r5),0 # test protection of first byte - ipm %r7 - srl %r7,28 - clr %r6,%r7 # compare cc with last access code - be .Lsame-.LPG1(%r13) - lhi %r8,0 # no program checks - b .Lsavchk-.LPG1(%r13) -.Lsame: - ar %r5,%r1 # add 128KB to end of chunk - bno .Lloop-.LPG1(%r13) # r1 < 0x80000000 -> loop -.Lchkmem: # > 2GB or tprot got a program check - lhi %r8,1 # set program check flag -.Lsavchk: - clr %r4,%r5 # chunk size > 0? - be .Lchkloop-.LPG1(%r13) - st %r4,0(%r3) # store start address of chunk - lr %r0,%r5 - slr %r0,%r4 - st %r0,4(%r3) # store size of chunk - st %r6,8(%r3) # store type of chunk - la %r3,12(%r3) - ahi %r10,-1 # update chunk number -.Lchkloop: - lr %r6,%r7 # set access code to last cc - # we got an exception or we're starting a new - # chunk , we must check if we should - # still try to find valid memory (if we detected - # the amount of available storage), and if we - # have chunks left - xr %r0,%r0 - clr %r0,%r9 # did we detect memory? - je .Ldonemem # if not, leave - chi %r10,0 # do we have chunks left? - je .Ldonemem - chi %r8,1 # program check ? - je .Lpgmchk - lr %r4,%r5 # potential new chunk - alr %r5,%r1 # add 128KB to end of chunk - j .Llpcnt -.Lpgmchk: - alr %r5,%r1 # add 128KB to end of chunk - lr %r4,%r5 # potential new chunk -.Llpcnt: - clr %r5,%r9 # should we go on? - jl .Lloop -.Ldonemem: l %r12,.Lmflags-.LPG1(%r13) # get address of machine_flags # # find out if we have an IEEE fpu @@ -273,7 +134,6 @@ startup_continue: .long 0 # cr15: linkage stack operations .Lduct: .long 0,0,0,0,0,0,0,0 .long 0,0,0,0,0,0,0,0 -.Lpcmem:.long 0x00080000,0x80000000 + .Lchkmem .Lpcfpu:.long 0x00080000,0x80000000 + .Lchkfpu .Lpccsp:.long 0x00080000,0x80000000 + .Lchkcsp .Lpcmvpg:.long 0x00080000,0x80000000 + .Lchkmvpg @@ -284,7 +144,9 @@ startup_continue: .Lbss_bgn: .long __bss_start .Lbss_end: .long _end .Lparmaddr: .long PARMAREA -.Lsccbaddr: .long .Lsccb +.Linittu: .long init_thread_union +.Lstartup_init: + .long startup_init .globl ipl_schib ipl_schib: @@ -300,26 +162,6 @@ ipl_devno: .word 0 .org 0x12000 -.globl s390_readinfo_sccb -s390_readinfo_sccb: -.Lsccb: - .hword 0x1000 # length, one page - .byte 0x00,0x00,0x00 - .byte 0x80 # variable response bit set -.Lsccbr: - .hword 0x00 # response code -.Lscpincr1: - .hword 0x00 -.Lscpa1: - .byte 0x00 - .fill 89,1,0 -.Lscpa2: - .int 0x00 -.Lscpincr2: - .quad 0x00 - .fill 3984,1,0 - .org 0x13000 - #ifdef CONFIG_SHARED_KERNEL .org 0x100000 #endif diff --git a/arch/s390/kernel/head64.S b/arch/s390/kernel/head64.S index 030a1c95f47c..b8fec4e5c5d4 100644 --- a/arch/s390/kernel/head64.S +++ b/arch/s390/kernel/head64.S @@ -65,162 +65,6 @@ startup_continue: brasl %r14,startup_init # set program check new psw mask mvc __LC_PGM_NEW_PSW(8),.Lpcmsk-.LPG1(%r13) - larl %r1,.Lslowmemdetect # set program check address - stg %r1,__LC_PGM_NEW_PSW+8 - lghi %r1,0xc - diag %r0,%r1,0x260 # get memory size of virtual machine - cgr %r0,%r1 # different? -> old detection routine - jne .Lslowmemdetect - larl %r3,ipl_flags - llgt %r3,0(%r3) - chi %r3,4 # ipled from an kernel NSS - je .Lslowmemdetect - aghi %r1,1 # size is one more than end - larl %r2,memory_chunk - stg %r1,8(%r2) # store size of chunk - -.Lslowmemdetect: - l %r2,.Lrcp-.LPG1(%r13) # Read SCP forced command word -.Lservicecall: - stosm .Lpmask-.LPG1(%r13),0x01 # authorize ext interrupts - - stctg %r0,%r0,.Lcr-.LPG1(%r13) # get cr0 - la %r1,0x200 # set bit 22 - og %r1,.Lcr-.LPG1(%r13) # or old cr0 with r1 - stg %r1,.Lcr-.LPG1(%r13) - lctlg %r0,%r0,.Lcr-.LPG1(%r13) # load modified cr0 - - mvc __LC_EXT_NEW_PSW(8),.Lpcmsk-.LPG1(%r13) # set postcall psw - larl %r1,.Lsclph - stg %r1,__LC_EXT_NEW_PSW+8 # set handler - - larl %r4,.Lsccb # %r4 is our index for sccb stuff - lgr %r1,%r4 # our sccb - .insn rre,0xb2200000,%r2,%r1 # service call - ipm %r1 - srl %r1,28 # get cc code - xr %r3,%r3 - chi %r1,3 - be .Lfchunk-.LPG1(%r13) # leave - chi %r1,2 - be .Lservicecall-.LPG1(%r13) - lpswe .Lwaitsclp-.LPG1(%r13) -.Lsclph: - lh %r1,.Lsccbr-.Lsccb(%r4) - chi %r1,0x10 # 0x0010 is the sucess code - je .Lprocsccb # let's process the sccb - chi %r1,0x1f0 - bne .Lfchunk-.LPG1(%r13) # unhandled error code - c %r2,.Lrcp-.LPG1(%r13) # Did we try Read SCP forced - bne .Lfchunk-.LPG1(%r13) # if no, give up - l %r2,.Lrcp2-.LPG1(%r13) # try with Read SCP - b .Lservicecall-.LPG1(%r13) -.Lprocsccb: - lghi %r1,0 - icm %r1,3,.Lscpincr1-.Lsccb(%r4) # use this one if != 0 - jnz .Lscnd - lg %r1,.Lscpincr2-.Lsccb(%r4) # otherwise use this one -.Lscnd: - xr %r3,%r3 # same logic - ic %r3,.Lscpa1-.Lsccb(%r4) - chi %r3,0x00 - jne .Lcompmem - l %r3,.Lscpa2-.Lsccb(%r4) -.Lcompmem: - mlgr %r2,%r1 # mem in MB on 128-bit - l %r1,.Lonemb-.LPG1(%r13) - mlgr %r2,%r1 # mem size in bytes in %r3 - b .Lfchunk-.LPG1(%r13) - - .align 4 -.Lpmask: - .byte 0 - .align 8 -.Lcr: - .quad 0x00 # place holder for cr0 -.Lwaitsclp: - .quad 0x0102000180000000,.Lsclph -.Lrcp: - .int 0x00120001 # Read SCP forced code -.Lrcp2: - .int 0x00020001 # Read SCP code -.Lonemb: - .int 0x100000 - -.Lfchunk: - -# -# find memory chunks. -# - larl %r9,memory_chunk # skip tprot loop if diag260 - lg %r9,8(%r9) # memory detection was successful - ltgr %r9,%r9 - jne .Ldonemem - - lgr %r9,%r3 # end of mem - larl %r1,.Lchkmem # set program check address - stg %r1,__LC_PGM_NEW_PSW+8 - la %r1,1 # test in increments of 128KB - sllg %r1,%r1,17 - larl %r3,memory_chunk - slgr %r4,%r4 # set start of chunk to zero - slgr %r5,%r5 # set end of chunk to zero - slr %r6,%r6 # set access code to zero - la %r10,MEMORY_CHUNKS # number of chunks -.Lloop: - tprot 0(%r5),0 # test protection of first byte - ipm %r7 - srl %r7,28 - clr %r6,%r7 # compare cc with last access code - je .Lsame - lghi %r8,0 # no program checks - j .Lsavchk -.Lsame: - algr %r5,%r1 # add 128KB to end of chunk - # no need to check here, - brc 12,.Lloop # this is the same chunk -.Lchkmem: # > 16EB or tprot got a program check - lghi %r8,1 # set program check flag -.Lsavchk: - clgr %r4,%r5 # chunk size > 0? - je .Lchkloop - stg %r4,0(%r3) # store start address of chunk - lgr %r0,%r5 - slgr %r0,%r4 - stg %r0,8(%r3) # store size of chunk - st %r6,20(%r3) # store type of chunk - la %r3,24(%r3) - ahi %r10,-1 # update chunk number -.Lchkloop: - lr %r6,%r7 # set access code to last cc - # we got an exception or we're starting a new - # chunk , we must check if we should - # still try to find valid memory (if we detected - # the amount of available storage), and if we - # have chunks left - lghi %r4,1 - sllg %r4,%r4,31 - clgr %r5,%r4 - je .Lhsaskip - xr %r0, %r0 - clgr %r0, %r9 # did we detect memory? - je .Ldonemem # if not, leave - chi %r10, 0 # do we have chunks left? - je .Ldonemem -.Lhsaskip: - chi %r8,1 # program check ? - je .Lpgmchk - lgr %r4,%r5 # potential new chunk - algr %r5,%r1 # add 128KB to end of chunk - j .Llpcnt -.Lpgmchk: - algr %r5,%r1 # add 128KB to end of chunk - lgr %r4,%r5 # potential new chunk -.Llpcnt: - clgr %r5,%r9 # should we go on? - jl .Lloop -.Ldonemem: - larl %r12,machine_flags # # find out if we have the MVPG instruction @@ -324,25 +168,6 @@ ipl_devno: .word 0 .org 0x12000 -.globl s390_readinfo_sccb -s390_readinfo_sccb: -.Lsccb: - .hword 0x1000 # length, one page - .byte 0x00,0x00,0x00 - .byte 0x80 # variable response bit set -.Lsccbr: - .hword 0x00 # response code -.Lscpincr1: - .hword 0x00 -.Lscpa1: - .byte 0x00 - .fill 89,1,0 -.Lscpa2: - .int 0x00 -.Lscpincr2: - .quad 0x00 - .fill 3984,1,0 - .org 0x13000 #ifdef CONFIG_SHARED_KERNEL .org 0x100000 diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c index 13eacce62011..052259530651 100644 --- a/arch/s390/kernel/ipl.c +++ b/arch/s390/kernel/ipl.c @@ -20,14 +20,13 @@ #include #include #include +#include #define IPL_PARM_BLOCK_VERSION 0 -#define LOADPARM_LEN 8 -extern char s390_readinfo_sccb[]; -#define SCCB_VALID (*((__u16*)&s390_readinfo_sccb[6]) == 0x0010) -#define SCCB_LOADPARM (&s390_readinfo_sccb[24]) -#define SCCB_FLAG (s390_readinfo_sccb[91]) +#define SCCB_VALID (s390_readinfo_sccb.header.response_code == 0x10) +#define SCCB_LOADPARM (&s390_readinfo_sccb.loadparm) +#define SCCB_FLAG (s390_readinfo_sccb.flags) enum ipl_type { IPL_TYPE_NONE = 1, @@ -1080,8 +1079,6 @@ static void do_reset_calls(void) reset->fn(); } -extern void reset_mcck_handler(void); -extern void reset_pgm_handler(void); extern __u32 dump_prefix_page; void s390_reset_system(void) @@ -1105,12 +1102,12 @@ void s390_reset_system(void) /* Set new machine check handler */ S390_lowcore.mcck_new_psw.mask = psw_kernel_bits & ~PSW_MASK_MCHECK; S390_lowcore.mcck_new_psw.addr = - PSW_ADDR_AMODE | (unsigned long) &reset_mcck_handler; + PSW_ADDR_AMODE | (unsigned long) s390_base_mcck_handler; /* Set new program check handler */ S390_lowcore.program_new_psw.mask = psw_kernel_bits & ~PSW_MASK_MCHECK; S390_lowcore.program_new_psw.addr = - PSW_ADDR_AMODE | (unsigned long) &reset_pgm_handler; + PSW_ADDR_AMODE | (unsigned long) s390_base_pgm_handler; do_reset_calls(); } diff --git a/arch/s390/kernel/reset.S b/arch/s390/kernel/reset.S deleted file mode 100644 index 8a87355161fa..000000000000 --- a/arch/s390/kernel/reset.S +++ /dev/null @@ -1,90 +0,0 @@ -/* - * arch/s390/kernel/reset.S - * - * Copyright (C) IBM Corp. 2006 - * Author(s): Heiko Carstens - * Michael Holzheu - */ - -#include -#include - -#ifdef CONFIG_64BIT - - .globl reset_mcck_handler -reset_mcck_handler: - basr %r13,0 -0: lg %r15,__LC_PANIC_STACK # load panic stack - aghi %r15,-STACK_FRAME_OVERHEAD - lg %r1,s390_reset_mcck_handler-0b(%r13) - ltgr %r1,%r1 - jz 1f - basr %r14,%r1 -1: la %r1,4095 - lmg %r0,%r15,__LC_GPREGS_SAVE_AREA-4095(%r1) - lpswe __LC_MCK_OLD_PSW - - .globl s390_reset_mcck_handler -s390_reset_mcck_handler: - .quad 0 - - .globl reset_pgm_handler -reset_pgm_handler: - stmg %r0,%r15,__LC_SAVE_AREA - basr %r13,0 -0: lg %r15,__LC_PANIC_STACK # load panic stack - aghi %r15,-STACK_FRAME_OVERHEAD - lg %r1,s390_reset_pgm_handler-0b(%r13) - ltgr %r1,%r1 - jz 1f - basr %r14,%r1 - lmg %r0,%r15,__LC_SAVE_AREA - lpswe __LC_PGM_OLD_PSW -1: lpswe disabled_wait_psw-0b(%r13) - .globl s390_reset_pgm_handler -s390_reset_pgm_handler: - .quad 0 - .align 8 -disabled_wait_psw: - .quad 0x0002000180000000,0x0000000000000000 + reset_pgm_handler - -#else /* CONFIG_64BIT */ - - .globl reset_mcck_handler -reset_mcck_handler: - basr %r13,0 -0: l %r15,__LC_PANIC_STACK # load panic stack - ahi %r15,-STACK_FRAME_OVERHEAD - l %r1,s390_reset_mcck_handler-0b(%r13) - ltr %r1,%r1 - jz 1f - basr %r14,%r1 -1: lm %r0,%r15,__LC_GPREGS_SAVE_AREA - lpsw __LC_MCK_OLD_PSW - - .globl s390_reset_mcck_handler -s390_reset_mcck_handler: - .long 0 - - .globl reset_pgm_handler -reset_pgm_handler: - stm %r0,%r15,__LC_SAVE_AREA - basr %r13,0 -0: l %r15,__LC_PANIC_STACK # load panic stack - ahi %r15,-STACK_FRAME_OVERHEAD - l %r1,s390_reset_pgm_handler-0b(%r13) - ltr %r1,%r1 - jz 1f - basr %r14,%r1 - lm %r0,%r15,__LC_SAVE_AREA - lpsw __LC_PGM_OLD_PSW - -1: lpsw disabled_wait_psw-0b(%r13) - .globl s390_reset_pgm_handler -s390_reset_pgm_handler: - .long 0 -disabled_wait_psw: - .align 8 - .long 0x000a0000,0x00000000 + reset_pgm_handler - -#endif /* CONFIG_64BIT */ diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index 2fa866f6f711..f73a11528217 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -284,140 +284,6 @@ static void __init conmode_default(void) } } -/* - * Create a Kernel NSS if the SAVESYS= parameter is defined -*/ -#define DEFSYS_CMD_SIZE 96 -#define SAVESYS_CMD_SIZE 32 - -extern int _eshared; -char kernel_nss_name[NSS_NAME_SIZE + 1]; - -#ifdef CONFIG_SHARED_KERNEL -static __init void create_kernel_nss(void) -{ - unsigned int i, stext_pfn, eshared_pfn, end_pfn, min_size; -#ifdef CONFIG_BLK_DEV_INITRD - unsigned int sinitrd_pfn, einitrd_pfn; -#endif - int response; - char *savesys_ptr; - char upper_command_line[COMMAND_LINE_SIZE]; - char defsys_cmd[DEFSYS_CMD_SIZE]; - char savesys_cmd[SAVESYS_CMD_SIZE]; - - /* Do nothing if we are not running under VM */ - if (!MACHINE_IS_VM) - return; - - /* Convert COMMAND_LINE to upper case */ - for (i = 0; i < strlen(COMMAND_LINE); i++) - upper_command_line[i] = toupper(COMMAND_LINE[i]); - - savesys_ptr = strstr(upper_command_line, "SAVESYS="); - - if (!savesys_ptr) - return; - - savesys_ptr += 8; /* Point to the beginning of the NSS name */ - for (i = 0; i < NSS_NAME_SIZE; i++) { - if (savesys_ptr[i] == ' ' || savesys_ptr[i] == '\0') - break; - kernel_nss_name[i] = savesys_ptr[i]; - } - - stext_pfn = PFN_DOWN(__pa(&_stext)); - eshared_pfn = PFN_DOWN(__pa(&_eshared)); - end_pfn = PFN_UP(__pa(&_end)); - min_size = end_pfn << 2; - - sprintf(defsys_cmd, "DEFSYS %s 00000-%.5X EW %.5X-%.5X SR %.5X-%.5X", - kernel_nss_name, stext_pfn - 1, stext_pfn, eshared_pfn - 1, - eshared_pfn, end_pfn); - -#ifdef CONFIG_BLK_DEV_INITRD - if (INITRD_START && INITRD_SIZE) { - sinitrd_pfn = PFN_DOWN(__pa(INITRD_START)); - einitrd_pfn = PFN_UP(__pa(INITRD_START + INITRD_SIZE)); - min_size = einitrd_pfn << 2; - sprintf(defsys_cmd, "%s EW %.5X-%.5X", defsys_cmd, - sinitrd_pfn, einitrd_pfn); - } -#endif - - sprintf(defsys_cmd, "%s EW MINSIZE=%.7iK", defsys_cmd, min_size); - sprintf(savesys_cmd, "SAVESYS %s \n IPL %s", - kernel_nss_name, kernel_nss_name); - - __cpcmd(defsys_cmd, NULL, 0, &response); - - if (response != 0) - return; - - __cpcmd(savesys_cmd, NULL, 0, &response); - - if (response != strlen(savesys_cmd)) - return; - - ipl_flags = IPL_NSS_VALID; -} - -#else /* CONFIG_SHARED_KERNEL */ - -static inline void create_kernel_nss(void) { } - -#endif /* CONFIG_SHARED_KERNEL */ - -/* - * Clear bss memory - */ -static __init void clear_bss_section(void) -{ - memset(__bss_start, 0, _end - __bss_start); -} - -/* - * Initialize storage key for kernel pages - */ -static __init void init_kernel_storage_key(void) -{ - unsigned long end_pfn, init_pfn; - - end_pfn = PFN_UP(__pa(&_end)); - - for (init_pfn = 0 ; init_pfn < end_pfn; init_pfn++) - page_set_storage_key(init_pfn << PAGE_SHIFT, PAGE_DEFAULT_KEY); -} - -static __init void detect_machine_type(void) -{ - struct cpuinfo_S390 *cpuinfo = &S390_lowcore.cpu_data; - - asm volatile("stidp %0" : "=m" (S390_lowcore.cpu_data.cpu_id)); - - /* Running under z/VM ? */ - if (cpuinfo->cpu_id.version == 0xff) - machine_flags |= 1; - - /* Running on a P/390 ? */ - if (cpuinfo->cpu_id.machine == 0x7490) - machine_flags |= 4; -} - -/* - * Save ipl parameters, clear bss memory, initialize storage keys - * and create a kernel NSS at startup if the SAVESYS= parm is defined - */ -void __init startup_init(void) -{ - ipl_save_parameters(); - clear_bss_section(); - init_kernel_storage_key(); - lockdep_init(); - detect_machine_type(); - create_kernel_nss(); -} - #ifdef CONFIG_SMP void (*_machine_restart)(char *command) = machine_restart_smp; void (*_machine_halt)(void) = machine_halt_smp; -- cgit v1.2.3 From 162e006ef59266b9ebf34e3d15ca1f3d9ee956d7 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 5 Feb 2007 21:18:41 +0100 Subject: [S390] Mark kernel text section read-only. Set read-only flag in the page table entries for the kernel image text section. This will catch all instruction caused corruptions withing the text section. Instruction replacement via kprobes still works, since it bypasses now dynamic address translation. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/early.c | 1 - arch/s390/kernel/kprobes.c | 27 +++++++++++++++++++++++---- arch/s390/kernel/vmlinux.lds.S | 3 ++- arch/s390/mm/init.c | 9 ++++----- 4 files changed, 29 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c index 40dd47970a33..e518dd53eff5 100644 --- a/arch/s390/kernel/early.c +++ b/arch/s390/kernel/early.c @@ -27,7 +27,6 @@ #define DEFSYS_CMD_SIZE 96 #define SAVESYS_CMD_SIZE 32 -extern int _eshared; char kernel_nss_name[NSS_NAME_SIZE + 1]; #ifdef CONFIG_SHARED_KERNEL diff --git a/arch/s390/kernel/kprobes.c b/arch/s390/kernel/kprobes.c index b2e1dc89a8c6..a466bab6677e 100644 --- a/arch/s390/kernel/kprobes.c +++ b/arch/s390/kernel/kprobes.c @@ -155,15 +155,34 @@ void __kprobes get_instruction_type(struct arch_specific_insn *ainsn) static int __kprobes swap_instruction(void *aref) { struct ins_replace_args *args = aref; + u32 *addr; + u32 instr; int err = -EFAULT; + /* + * Text segment is read-only, hence we use stura to bypass dynamic + * address translation to exchange the instruction. Since stura + * always operates on four bytes, but we only want to exchange two + * bytes do some calculations to get things right. In addition we + * shall not cross any page boundaries (vmalloc area!) when writing + * the new instruction. + */ + addr = (u32 *)ALIGN((unsigned long)args->ptr, 4); + if ((unsigned long)args->ptr & 2) + instr = ((*addr) & 0xffff0000) | args->new; + else + instr = ((*addr) & 0x0000ffff) | args->new << 16; + asm volatile( - "0: mvc 0(2,%2),0(%3)\n" - "1: la %0,0\n" + " lra %1,0(%1)\n" + "0: stura %2,%1\n" + "1: la %0,0\n" "2:\n" EX_TABLE(0b,2b) - : "+d" (err), "=m" (*args->ptr) - : "a" (args->ptr), "a" (&args->new), "m" (args->new)); + : "+d" (err) + : "a" (addr), "d" (instr) + : "memory", "cc"); + return err; } diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S index 8fedb1f9fc97..a48907392522 100644 --- a/arch/s390/kernel/vmlinux.lds.S +++ b/arch/s390/kernel/vmlinux.lds.S @@ -35,9 +35,10 @@ SECTIONS #ifdef CONFIG_SHARED_KERNEL . = ALIGN(1048576); /* VM shared segments are 1MB aligned */ +#endif + . = ALIGN(4096); _eshared = .; /* End of shareable data */ -#endif . = ALIGN(16); /* Exception table */ __start___ex_table = .; diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c index 162a338a5575..b3e7c45efb63 100644 --- a/arch/s390/mm/init.c +++ b/arch/s390/mm/init.c @@ -26,7 +26,6 @@ #include #include #include - #include #include #include @@ -96,8 +95,8 @@ static void __init setup_ro_region(void) pte_t new_pte; unsigned long address, end; - address = ((unsigned long)&__start_rodata) & PAGE_MASK; - end = PFN_ALIGN((unsigned long)&__end_rodata); + address = ((unsigned long)&_stext) & PAGE_MASK; + end = PFN_ALIGN((unsigned long)&_eshared); for (; address < end; address += PAGE_SIZE) { pgd = pgd_offset_k(address); @@ -173,8 +172,8 @@ void __init mem_init(void) datasize >>10, initsize >> 10); printk("Write protected kernel read-only data: %#lx - %#lx\n", - (unsigned long)&__start_rodata, - PFN_ALIGN((unsigned long)&__end_rodata) - 1); + (unsigned long)&_stext, + PFN_ALIGN((unsigned long)&_eshared) - 1); } void free_initmem(void) -- cgit v1.2.3 From 4d284cac76d0bfebc42d76b428c4e44d921200a9 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 5 Feb 2007 21:18:53 +0100 Subject: [S390] Avoid excessive inlining. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/binfmt_elf32.c | 2 +- arch/s390/kernel/module.c | 4 ++-- arch/s390/kernel/setup.c | 6 +++--- arch/s390/kernel/smp.c | 8 ++++---- arch/s390/kernel/stacktrace.c | 10 +++++----- arch/s390/kernel/time.c | 4 ++-- arch/s390/lib/uaccess_pt.c | 10 +++++----- arch/s390/mm/cmm.c | 2 +- arch/s390/mm/extmem.c | 2 +- 9 files changed, 24 insertions(+), 24 deletions(-) (limited to 'arch') diff --git a/arch/s390/kernel/binfmt_elf32.c b/arch/s390/kernel/binfmt_elf32.c index 5c46054195cb..f1e40ca00d8d 100644 --- a/arch/s390/kernel/binfmt_elf32.c +++ b/arch/s390/kernel/binfmt_elf32.c @@ -192,7 +192,7 @@ MODULE_AUTHOR("Gerhard Tonn "); #undef cputime_to_timeval #define cputime_to_timeval cputime_to_compat_timeval -static __inline__ void +static inline void cputime_to_compat_timeval(const cputime_t cputime, struct compat_timeval *value) { value->tv_usec = cputime % 1000000; diff --git a/arch/s390/kernel/module.c b/arch/s390/kernel/module.c index f5476f5c2e96..39d1dd752529 100644 --- a/arch/s390/kernel/module.c +++ b/arch/s390/kernel/module.c @@ -59,7 +59,7 @@ void module_free(struct module *mod, void *module_region) table entries. */ } -static inline void +static void check_rela(Elf_Rela *rela, struct module *me) { struct mod_arch_syminfo *info; @@ -182,7 +182,7 @@ apply_relocate(Elf_Shdr *sechdrs, const char *strtab, unsigned int symindex, return -ENOEXEC; } -static inline int +static int apply_rela(Elf_Rela *rela, Elf_Addr base, Elf_Sym *symtab, struct module *me) { diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index f73a11528217..03739813d3bf 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -129,7 +129,7 @@ char vmhalt_cmd[128] = ""; char vmpoff_cmd[128] = ""; static char vmpanic_cmd[128] = ""; -static inline void strncpy_skip_quote(char *dst, char *src, int n) +static void strncpy_skip_quote(char *dst, char *src, int n) { int sx, dx; @@ -396,8 +396,8 @@ early_param("ipldelay", early_parse_ipldelay); unsigned int switch_amode = 0; EXPORT_SYMBOL_GPL(switch_amode); -static inline void set_amode_and_uaccess(unsigned long user_amode, - unsigned long user32_amode) +static void set_amode_and_uaccess(unsigned long user_amode, + unsigned long user32_amode) { psw_user_bits = PSW_BASE_BITS | PSW_MASK_DAT | user_amode | PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK | diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index 08f9a4dfb18b..65b52320d145 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -194,7 +194,7 @@ int smp_call_function_on(void (*func) (void *info), void *info, } EXPORT_SYMBOL(smp_call_function_on); -static inline void do_send_stop(void) +static void do_send_stop(void) { int cpu, rc; @@ -208,7 +208,7 @@ static inline void do_send_stop(void) } } -static inline void do_store_status(void) +static void do_store_status(void) { int cpu, rc; @@ -224,7 +224,7 @@ static inline void do_store_status(void) } } -static inline void do_wait_for_stop(void) +static void do_wait_for_stop(void) { int cpu; @@ -534,7 +534,7 @@ smp_put_cpu(int cpu) spin_unlock_irqrestore(&smp_reserve_lock, flags); } -static inline int +static int cpu_stopped(int cpu) { __u32 status; diff --git a/arch/s390/kernel/stacktrace.c b/arch/s390/kernel/stacktrace.c index 0d14a4789bf2..2e5c65a1863e 100644 --- a/arch/s390/kernel/stacktrace.c +++ b/arch/s390/kernel/stacktrace.c @@ -11,11 +11,11 @@ #include #include -static inline unsigned long save_context_stack(struct stack_trace *trace, - unsigned int *skip, - unsigned long sp, - unsigned long low, - unsigned long high) +static unsigned long save_context_stack(struct stack_trace *trace, + unsigned int *skip, + unsigned long sp, + unsigned long low, + unsigned long high) { struct stack_frame *sf; struct pt_regs *regs; diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c index 39a72d3cb89a..3b91f27ab202 100644 --- a/arch/s390/kernel/time.c +++ b/arch/s390/kernel/time.c @@ -166,7 +166,7 @@ int sysctl_hz_timer = 1; * Stop the HZ tick on the current CPU. * Only cpu_idle may call this function. */ -static inline void stop_hz_timer(void) +static void stop_hz_timer(void) { unsigned long flags; unsigned long seq, next; @@ -210,7 +210,7 @@ static inline void stop_hz_timer(void) * Start the HZ tick on the current CPU. * Only cpu_idle may call this function. */ -static inline void start_hz_timer(void) +static void start_hz_timer(void) { BUG_ON(!in_interrupt()); diff --git a/arch/s390/lib/uaccess_pt.c b/arch/s390/lib/uaccess_pt.c index 637192fa7c9a..63181671e3e3 100644 --- a/arch/s390/lib/uaccess_pt.c +++ b/arch/s390/lib/uaccess_pt.c @@ -15,8 +15,8 @@ #include #include "uaccess.h" -static inline int __handle_fault(struct mm_struct *mm, unsigned long address, - int write_access) +static int __handle_fault(struct mm_struct *mm, unsigned long address, + int write_access) { struct vm_area_struct *vma; int ret = -EFAULT; @@ -81,8 +81,8 @@ out_sigbus: return ret; } -static inline size_t __user_copy_pt(unsigned long uaddr, void *kptr, - size_t n, int write_user) +static size_t __user_copy_pt(unsigned long uaddr, void *kptr, + size_t n, int write_user) { struct mm_struct *mm = current->mm; unsigned long offset, pfn, done, size; @@ -139,7 +139,7 @@ fault: * Do DAT for user address by page table walk, return kernel address. * This function needs to be called with current->mm->page_table_lock held. */ -static inline unsigned long __dat_user_addr(unsigned long uaddr) +static unsigned long __dat_user_addr(unsigned long uaddr) { struct mm_struct *mm = current->mm; unsigned long pfn, ret; diff --git a/arch/s390/mm/cmm.c b/arch/s390/mm/cmm.c index fb87e2320eba..f93a056869bc 100644 --- a/arch/s390/mm/cmm.c +++ b/arch/s390/mm/cmm.c @@ -245,7 +245,7 @@ cmm_set_timeout(long nr, long seconds) cmm_set_timer(); } -static inline int +static int cmm_skip_blanks(char *cp, char **endp) { char *str; diff --git a/arch/s390/mm/extmem.c b/arch/s390/mm/extmem.c index 8bffadb5e537..394980b05e6f 100644 --- a/arch/s390/mm/extmem.c +++ b/arch/s390/mm/extmem.c @@ -91,7 +91,7 @@ static char *segtype_string[] = { "SW", "EW", "SR", "ER", "SN", "EN", "SC", * Create the 8 bytes, ebcdic VM segment name from * an ascii name. */ -static void inline +static void dcss_mkname(char *name, char *dcss_name) { int i; -- cgit v1.2.3 From c237508afa5d47282d3047784864013eebdc68ab Mon Sep 17 00:00:00 2001 From: Horms Date: Mon, 5 Feb 2007 13:49:10 -0800 Subject: [IA64] kexec: Move machine_shutdown from machine_kexec.c to process.c This moves the ia64 implementation of machine_shutdown() from machine_kexec.c to process.c, which is in keeping with the implelmentation on other architectures, and seems like a much more appropriate home for it. Signed-off-by: Simon Horman Signed-off-by: Tony Luck --- arch/ia64/kernel/machine_kexec.c | 13 ------------- arch/ia64/kernel/process.c | 16 ++++++++++++++++ 2 files changed, 16 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/machine_kexec.c b/arch/ia64/kernel/machine_kexec.c index 655195d483df..e51cd904a23e 100644 --- a/arch/ia64/kernel/machine_kexec.c +++ b/arch/ia64/kernel/machine_kexec.c @@ -69,19 +69,6 @@ void machine_kexec_cleanup(struct kimage *image) { } -void machine_shutdown(void) -{ -#ifdef CONFIG_HOTPLUG_CPU - int cpu; - - for_each_online_cpu(cpu) { - if (cpu != smp_processor_id()) - cpu_down(cpu); - } -#endif - kexec_disable_iosapic(); -} - /* * Do not allocate memory (or fail in any way) in machine_kexec(). * We are past the point of no return, committed to rebooting now. diff --git a/arch/ia64/kernel/process.c b/arch/ia64/kernel/process.c index 17685abaf496..ae96d4176995 100644 --- a/arch/ia64/kernel/process.c +++ b/arch/ia64/kernel/process.c @@ -34,6 +34,7 @@ #include #include #include +#include #include #include #include @@ -803,6 +804,21 @@ cpu_halt (void) ia64_pal_halt(min_power_state); } +void machine_shutdown(void) +{ +#ifdef CONFIG_HOTPLUG_CPU + int cpu; + + for_each_online_cpu(cpu) { + if (cpu != smp_processor_id()) + cpu_down(cpu); + } +#endif +#ifdef CONFIG_KEXEC + kexec_disable_iosapic(); +#endif +} + void machine_restart (char *restart_cmd) { -- cgit v1.2.3 From 90f9d70a582c02f50b4dd847166cd5b037219891 Mon Sep 17 00:00:00 2001 From: "bibo,mao" Date: Wed, 31 Jan 2007 17:50:31 +0800 Subject: [IA64] enable singlestep on system call As is pointed out in http://www.gelato.org/community/view_linear.php?id=1_1036&from=authors&value=Ian%20Wienand#1_1039, if single step on break instruction, the break fault has higher priority than the single-step trap. When the break fault handler is entered, it advances the IP by 1 instruction so break instruction single-stepping is skipped, actually it is next instruction which is single stepped. This patch modifies this, it adds TIF_SINGLESTEP bit for thread flags, and generate a fake sigtrap when single stepping break instruction. Test case in attachment can verify this. Any comments is welcome. Signed-off-by: bibo, mao Signed-off-by: Tony Luck --- arch/ia64/kernel/ptrace.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/ptrace.c b/arch/ia64/kernel/ptrace.c index aa705e46b974..f1ec129ae3a1 100644 --- a/arch/ia64/kernel/ptrace.c +++ b/arch/ia64/kernel/ptrace.c @@ -1405,6 +1405,7 @@ ptrace_disable (struct task_struct *child) struct ia64_psr *child_psr = ia64_psr(task_pt_regs(child)); /* make sure the single step/taken-branch trap bits are not set: */ + clear_tsk_thread_flag(child, TIF_SINGLESTEP); child_psr->ss = 0; child_psr->tb = 0; } @@ -1525,6 +1526,7 @@ sys_ptrace (long request, pid_t pid, unsigned long addr, unsigned long data) * Make sure the single step/taken-branch trap bits * are not set: */ + clear_tsk_thread_flag(child, TIF_SINGLESTEP); ia64_psr(pt)->ss = 0; ia64_psr(pt)->tb = 0; @@ -1556,6 +1558,7 @@ sys_ptrace (long request, pid_t pid, unsigned long addr, unsigned long data) goto out_tsk; clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); + set_tsk_thread_flag(child, TIF_SINGLESTEP); if (request == PTRACE_SINGLESTEP) { ia64_psr(pt)->ss = 1; } else { @@ -1595,13 +1598,9 @@ sys_ptrace (long request, pid_t pid, unsigned long addr, unsigned long data) } -void +static void syscall_trace (void) { - if (!test_thread_flag(TIF_SYSCALL_TRACE)) - return; - if (!(current->ptrace & PT_PTRACED)) - return; /* * The 0x80 provides a way for the tracing parent to * distinguish between a syscall stop and SIGTRAP delivery. @@ -1664,7 +1663,8 @@ syscall_trace_leave (long arg0, long arg1, long arg2, long arg3, audit_syscall_exit(success, result); } - if (test_thread_flag(TIF_SYSCALL_TRACE) + if ((test_thread_flag(TIF_SYSCALL_TRACE) + || test_thread_flag(TIF_SINGLESTEP)) && (current->ptrace & PT_PTRACED)) syscall_trace(); } -- cgit v1.2.3 From ae0af3e3462fdada42deba30479aba70c6cf8b72 Mon Sep 17 00:00:00 2001 From: Aron Griffis Date: Mon, 5 Feb 2007 13:54:31 -0800 Subject: [IA64] use snprintf() on features field of /proc/cpuinfo Some patches have turned up on xen-devel recently to convert strcpy() to safer alternatives and so forth. While reviewing those patches I noticed that the features string building could be cleaned up. This patch uses snprintf() instead of strcpy() and direct character pointer manipulation. It makes the features string building safe and gets rid of the special case for features output in show_cpuinfo() Additionally I removed the (int) cast of ARRAY_SIZE, which seems to serve no purpose. Signed-off-by: Aron Griffis Signed-off-by: Tony Luck --- arch/ia64/kernel/setup.c | 31 ++++++++++++++----------------- 1 file changed, 14 insertions(+), 17 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index ad567b8d432e..83c2629e1c4c 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -569,34 +569,31 @@ show_cpuinfo (struct seq_file *m, void *v) { 1UL << 1, "spontaneous deferral"}, { 1UL << 2, "16-byte atomic ops" } }; - char features[128], *cp, sep; + char features[128], *cp, *sep; struct cpuinfo_ia64 *c = v; unsigned long mask; unsigned long proc_freq; - int i; + int i, size; mask = c->features; /* build the feature string: */ - memcpy(features, " standard", 10); + memcpy(features, "standard", 9); cp = features; - sep = 0; - for (i = 0; i < (int) ARRAY_SIZE(feature_bits); ++i) { + size = sizeof(features); + sep = ""; + for (i = 0; i < ARRAY_SIZE(feature_bits) && size > 1; ++i) { if (mask & feature_bits[i].mask) { - if (sep) - *cp++ = sep; - sep = ','; - *cp++ = ' '; - strcpy(cp, feature_bits[i].feature_name); - cp += strlen(feature_bits[i].feature_name); + cp += snprintf(cp, size, "%s%s", sep, + feature_bits[i].feature_name), + sep = ", "; mask &= ~feature_bits[i].mask; + size = sizeof(features) - (cp - features); } } - if (mask) { - /* print unknown features as a hex value: */ - if (sep) - *cp++ = sep; - sprintf(cp, " 0x%lx", mask); + if (mask && size > 1) { + /* print unknown features as a hex value */ + snprintf(cp, size, "%s0x%lx", sep, mask); } proc_freq = cpufreq_quick_get(cpunum); @@ -612,7 +609,7 @@ show_cpuinfo (struct seq_file *m, void *v) "model name : %s\n" "revision : %u\n" "archrev : %u\n" - "features :%s\n" /* don't change this---it _is_ right! */ + "features : %s\n" "cpu number : %lu\n" "cpu regs : %u\n" "cpu MHz : %lu.%06lu\n" -- cgit v1.2.3 From 87f76d3aafe5b5e0a1d6d857088a0263b35afa6b Mon Sep 17 00:00:00 2001 From: "bibo,mao" Date: Tue, 30 Jan 2007 11:02:19 +0800 Subject: [IA64] find thread for user rbs address I encountered one problem when running ptrace test case the situation is this: traced process's syscall parameter needs to be accessed, but for sys_clone system call with clone_flag (CLONE_VFORK | CLONE_VM | SIGCHLD) parameter. This syscall's parameter accessing result is wrong. The reason is that vforked child process mm point is the same, but tgid is different. Without this patch find_thread_for_addr will return vforked process if vforked process is also stopped, but not the thread which calls vfork syscall. Signed-off-by: Tony Luck --- arch/ia64/kernel/ptrace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/ia64/kernel/ptrace.c b/arch/ia64/kernel/ptrace.c index f1ec129ae3a1..3f8918782e0c 100644 --- a/arch/ia64/kernel/ptrace.c +++ b/arch/ia64/kernel/ptrace.c @@ -607,7 +607,7 @@ find_thread_for_addr (struct task_struct *child, unsigned long addr) */ list_for_each_safe(this, next, ¤t->children) { p = list_entry(this, struct task_struct, sibling); - if (p->mm != mm) + if (p->tgid != child->tgid) continue; if (thread_matches(p, addr)) { child = p; -- cgit v1.2.3 From c2c77fe8df3e0322a613ba1540910632ad14d96d Mon Sep 17 00:00:00 2001 From: Bernhard Walle Date: Sun, 28 Jan 2007 13:47:02 +0100 Subject: [IA64] Fix NULL-pointer dereference in ia64_machine_kexec() This patch fixes a NULL-pointer dereference in ia64_machine_kexec(). The variable ia64_kimage is set in machine_kexec_prepare() which is called from sys_kexec_load(). If kdump wasn't configured before, ia64_kimage is NULL. machine_kdump_on_init() passes ia64_kimage() to machine_kexec() which assumes a valid value. The patch also adds a few sanity checks for the image to simplify debugging of similar problems in future. Signed-off-by: Bernhard Walle Signed-off-by: Tony Luck --- arch/ia64/kernel/crash.c | 5 +++++ arch/ia64/kernel/machine_kexec.c | 2 ++ 2 files changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/ia64/kernel/crash.c b/arch/ia64/kernel/crash.c index 2018e624f5e2..9d92097ce96d 100644 --- a/arch/ia64/kernel/crash.c +++ b/arch/ia64/kernel/crash.c @@ -118,6 +118,11 @@ machine_crash_shutdown(struct pt_regs *pt) static void machine_kdump_on_init(void) { + if (!ia64_kimage) { + printk(KERN_NOTICE "machine_kdump_on_init(): " + "kdump not configured\n"); + return; + } local_irq_disable(); kexec_disable_iosapic(); machine_kexec(ia64_kimage); diff --git a/arch/ia64/kernel/machine_kexec.c b/arch/ia64/kernel/machine_kexec.c index e51cd904a23e..4f0f3b8c1ee2 100644 --- a/arch/ia64/kernel/machine_kexec.c +++ b/arch/ia64/kernel/machine_kexec.c @@ -82,6 +82,7 @@ static void ia64_machine_kexec(struct unw_frame_info *info, void *arg) unsigned long vector; int ii; + BUG_ON(!image); if (image->type == KEXEC_TYPE_CRASH) { crash_save_this_cpu(); current->thread.ksp = (__u64)info->sw - 16; @@ -120,6 +121,7 @@ static void ia64_machine_kexec(struct unw_frame_info *info, void *arg) void machine_kexec(struct kimage *image) { + BUG_ON(!image); unw_init_running(ia64_machine_kexec, image); for(;;); } -- cgit v1.2.3 From 06f87adff12e52429390b22c57443665b073cd82 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Fri, 26 Jan 2007 00:38:53 -0500 Subject: [IA64] fix ACPI Kconfig issues All IA64 systems except IA64_HP_SIM include ACPI and PCI. So prevent IA64 Kconfigs that try to do irritating things like building PCI without building ACPI. Signed-off-by: Len Brown Signed-off-by: Tony Luck --- arch/ia64/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index fcacfe291b9b..4b35c93eca2f 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -11,6 +11,8 @@ menu "Processor type and features" config IA64 bool + select PCI if (!IA64_HP_SIM) + select ACPI if (!IA64_HP_SIM) default y help The Itanium Processor Family is Intel's 64-bit successor to @@ -84,8 +86,6 @@ choice config IA64_GENERIC bool "generic" - select ACPI - select PCI select NUMA select ACPI_NUMA help -- cgit v1.2.3 From 451fe00cf7fd48ba55acd1c8b891e7a65e1b3f81 Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Wed, 24 Jan 2007 22:48:04 -0700 Subject: [IA64] Clear IRQ affinity when unregistered When we offline a CPU, migrate_irqs() tries to determine whether the affinity bits of the IRQ descriptor match any of the remaining online CPUs. If not, it fixes up the interrupt to point somewhere else. Unfortunately, if an IRQ is unregistered the IRQ descriptor may still have affinity to the CPU being offlined, but the no_irq_chip handler doesn't provide a set_affinity function. This causes us to hit the WARN_ON in migrate_irqs(). The easiest solution seems to be setting all the bits in the affinity mask when the last interrupt is removed from the vector. I hit this on an older kernel with Xen/ia64 using driver domains (so it probably needs more testing on upstream). Xen essentially uses the bind/unbind interface in sysfs to unregister a device from a driver and thus unregister the interrupt. Signed-off-by: Alex Williamson Signed-off-by: Tony Luck --- arch/ia64/kernel/iosapic.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/ia64/kernel/iosapic.c b/arch/ia64/kernel/iosapic.c index 0fc5fb7865cf..d6aab40c6416 100644 --- a/arch/ia64/kernel/iosapic.c +++ b/arch/ia64/kernel/iosapic.c @@ -925,6 +925,11 @@ iosapic_unregister_intr (unsigned int gsi) /* Clear the interrupt controller descriptor */ idesc->chip = &no_irq_type; +#ifdef CONFIG_SMP + /* Clear affinity */ + cpus_setall(idesc->affinity); +#endif + /* Clear the interrupt information */ memset(&iosapic_intr_info[vector], 0, sizeof(struct iosapic_intr_info)); -- cgit v1.2.3 From 980dbfd421c8d33edbd2fbc8f5a6233ccbefb052 Mon Sep 17 00:00:00 2001 From: Russ Anderson Date: Mon, 8 Jan 2007 16:05:08 -0600 Subject: [IA64-SGI] Check for TIO errors on shub2 Altix The shub2 error interrupt handler must check for TIO errors. Signed-off-by: Russ Anderson (rja@sgi.com) Signed-off-by: Tony Luck --- arch/ia64/sn/kernel/huberror.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/ia64/sn/kernel/huberror.c b/arch/ia64/sn/kernel/huberror.c index abca6bd7962f..fcf7f93c4b61 100644 --- a/arch/ia64/sn/kernel/huberror.c +++ b/arch/ia64/sn/kernel/huberror.c @@ -3,7 +3,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 1992 - 1997, 2000,2002-2005 Silicon Graphics, Inc. All rights reserved. + * Copyright (C) 1992 - 1997, 2000,2002-2007 Silicon Graphics, Inc. All rights reserved. */ #include @@ -38,12 +38,20 @@ static irqreturn_t hub_eint_handler(int irq, void *arg) (u64) nasid, 0, 0, 0, 0, 0, 0); if ((int)ret_stuff.v0) - panic("hubii_eint_handler(): Fatal TIO Error"); + panic("%s: Fatal %s Error", __FUNCTION__, + ((nasid & 1) ? "TIO" : "HUBII")); if (!(nasid & 1)) /* Not a TIO, handle CRB errors */ (void)hubiio_crb_error_handler(hubdev_info); - } else - bte_error_handler((unsigned long)NODEPDA(nasid_to_cnodeid(nasid))); + } else + if (nasid & 1) { /* TIO errors */ + SAL_CALL_NOLOCK(ret_stuff, SN_SAL_HUB_ERROR_INTERRUPT, + (u64) nasid, 0, 0, 0, 0, 0, 0); + + if ((int)ret_stuff.v0) + panic("%s: Fatal TIO Error", __FUNCTION__); + } else + bte_error_handler((unsigned long)NODEPDA(nasid_to_cnodeid(nasid))); return IRQ_HANDLED; } -- cgit v1.2.3 From d1598e05faa11d9f04e0a226122dd57674fb1dab Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Wed, 3 Jan 2007 09:26:21 +0000 Subject: [IA64] Enable SWIOTLB only when needed Don't force CONFIG_SWIOTLB on when not actually needed (i.e. HP_ZX1 and SGI_SN2). Signed-off-by: Jan Beulich Signed-off-by: Tony Luck --- arch/ia64/Kconfig | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 4b35c93eca2f..f1d2899e9a62 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -30,7 +30,6 @@ config MMU config SWIOTLB bool - default y config RWSEM_XCHGADD_ALGORITHM bool @@ -88,6 +87,7 @@ config IA64_GENERIC bool "generic" select NUMA select ACPI_NUMA + select SWIOTLB help This selects the system type of your hardware. A "generic" kernel will run on any supported IA-64 system. However, if you configure @@ -104,6 +104,7 @@ config IA64_GENERIC config IA64_DIG bool "DIG-compliant" + select SWIOTLB config IA64_HP_ZX1 bool "HP-zx1/sx1000" @@ -113,6 +114,7 @@ config IA64_HP_ZX1 config IA64_HP_ZX1_SWIOTLB bool "HP-zx1/sx1000 with software I/O TLB" + select SWIOTLB help Build a kernel that runs on HP zx1 and sx1000 systems even when they have broken PCI devices which cannot DMA to full 32 bits. Apart @@ -131,6 +133,7 @@ config IA64_SGI_SN2 config IA64_HP_SIM bool "Ski-simulator" + select SWIOTLB endchoice -- cgit v1.2.3 From 139b830477ccdca21b68c40f9a83ec327e65eb56 Mon Sep 17 00:00:00 2001 From: Bob Picco Date: Tue, 30 Jan 2007 02:11:09 -0800 Subject: [IA64] register memory ranges in a consistent manner While pursuing and unrelated issue with 64Mb granules I noticed a problem related to inconsistent use of add_active_range. There doesn't appear any reason to me why FLATMEM versus DISCONTIG_MEM should register memory to add_active_range with different code. So I've changed the code into a common implementation. The other subtle issue fixed by this patch was calling add_active_range in count_node_pages before granule aligning is performed. We were lucky with 16MB granules but not so with 64MB granules. count_node_pages has reserved regions filtered out and as a consequence linked kernel text and data aren't covered by calls to count_node_pages. So linked kernel regions wasn't reported to add_active_regions. This resulted in free_initmem causing numerous bad_page reports. This won't occur with this patch because now all known memory regions are reported by register_active_ranges. Acked-by: Mel Gorman Signed-off-by: Bob Picco Acked-by: Simon Horman Signed-off-by: Andrew Morton Signed-off-by: Tony Luck --- arch/ia64/mm/discontig.c | 4 +++- arch/ia64/mm/init.c | 19 +++++++++++++++++-- 2 files changed, 20 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c index d3edb12f3cf9..999cefd2b226 100644 --- a/arch/ia64/mm/discontig.c +++ b/arch/ia64/mm/discontig.c @@ -473,6 +473,9 @@ void __init find_memory(void) node_clear(node, memory_less_mask); mem_data[node].min_pfn = ~0UL; } + + efi_memmap_walk(register_active_ranges, NULL); + /* * Initialize the boot memory maps in reverse order since that's * what the bootmem allocator expects @@ -660,7 +663,6 @@ static __init int count_node_pages(unsigned long start, unsigned long len, int n { unsigned long end = start + len; - add_active_range(node, start >> PAGE_SHIFT, end >> PAGE_SHIFT); mem_data[node].num_physpages += len >> PAGE_SHIFT; if (start <= __pa(MAX_DMA_ADDRESS)) mem_data[node].num_dma_physpages += diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c index 1373fae7657f..8b7599808dd5 100644 --- a/arch/ia64/mm/init.c +++ b/arch/ia64/mm/init.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include @@ -595,13 +596,27 @@ find_largest_hole (u64 start, u64 end, void *arg) return 0; } +#endif /* CONFIG_VIRTUAL_MEM_MAP */ + int __init register_active_ranges(u64 start, u64 end, void *arg) { - add_active_range(0, __pa(start) >> PAGE_SHIFT, __pa(end) >> PAGE_SHIFT); + int nid = paddr_to_nid(__pa(start)); + + if (nid < 0) + nid = 0; +#ifdef CONFIG_KEXEC + if (start > crashk_res.start && start < crashk_res.end) + start = crashk_res.end; + if (end > crashk_res.start && end < crashk_res.end) + end = crashk_res.start; +#endif + + if (start < end) + add_active_range(nid, __pa(start) >> PAGE_SHIFT, + __pa(end) >> PAGE_SHIFT); return 0; } -#endif /* CONFIG_VIRTUAL_MEM_MAP */ static int __init count_reserved_pages (u64 start, u64 end, void *arg) -- cgit v1.2.3 From d00195ebc18049f067c8e389c186aa6f5d2b659f Mon Sep 17 00:00:00 2001 From: Kirill Korotaev Date: Mon, 5 Feb 2007 16:19:59 -0800 Subject: [IA64] alignment bug in ldscript Occasionally the FSYS_RETURN patch list can have an odd length, causing other data structures to get out of alignment. In OpenVZ it is odd and we get misaligned kernel image, which does not boot. Signed-off-by: Alexey Kuznetsov Signed-off-by: Kirill Korotaev Signed-off-by: Andrew Morton Signed-off-by: Tony Luck --- arch/ia64/kernel/vmlinux.lds.S | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/ia64/kernel/vmlinux.lds.S b/arch/ia64/kernel/vmlinux.lds.S index d6083a0936f4..8f3d0066f446 100644 --- a/arch/ia64/kernel/vmlinux.lds.S +++ b/arch/ia64/kernel/vmlinux.lds.S @@ -157,6 +157,7 @@ SECTIONS } #endif + . = ALIGN(8); __con_initcall_start = .; .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) { *(.con_initcall.init) } -- cgit v1.2.3 From 671496affdb5228786896864c3f900f66563e8c1 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Mon, 5 Feb 2007 16:20:03 -0800 Subject: [IA64] missing exports hwsw_sync_... Add missing exports to allow several drivers to be built as module with CONFIG_IA64_HP_ZX1_SWIOTLB. Signed-off-by: Jan Beulich Signed-off-by: Andrew Morton Signed-off-by: Tony Luck --- arch/ia64/hp/common/hwsw_iommu.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/ia64/hp/common/hwsw_iommu.c b/arch/ia64/hp/common/hwsw_iommu.c index a5a5637507be..2153bcacbe6c 100644 --- a/arch/ia64/hp/common/hwsw_iommu.c +++ b/arch/ia64/hp/common/hwsw_iommu.c @@ -192,3 +192,7 @@ EXPORT_SYMBOL(hwsw_unmap_sg); EXPORT_SYMBOL(hwsw_dma_supported); EXPORT_SYMBOL(hwsw_alloc_coherent); EXPORT_SYMBOL(hwsw_free_coherent); +EXPORT_SYMBOL(hwsw_sync_single_for_cpu); +EXPORT_SYMBOL(hwsw_sync_single_for_device); +EXPORT_SYMBOL(hwsw_sync_sg_for_cpu); +EXPORT_SYMBOL(hwsw_sync_sg_for_device); -- cgit v1.2.3 From f1c0afa2e8802c01cf82c915e2bb3cb2a81570d4 Mon Sep 17 00:00:00 2001 From: George Beshers Date: Mon, 5 Feb 2007 16:20:04 -0800 Subject: [IA64] show_mem() for IA64 sparsemem NUMA On the ia64 architecture only this patch upgrades show_mem() for sparse memory to be the same as it was for discontig memory. It has been shown to work on NUMA and flatmem architectures. Signed-off-by: George Beshers Signed-off-by: Andrew Morton Signed-off-by: Tony Luck --- arch/ia64/mm/contig.c | 74 +++++++++++++++++++++++++++++++++------------------ 1 file changed, 48 insertions(+), 26 deletions(-) (limited to 'arch') diff --git a/arch/ia64/mm/contig.c b/arch/ia64/mm/contig.c index ec8657bb5bd2..63e6d49c5813 100644 --- a/arch/ia64/mm/contig.c +++ b/arch/ia64/mm/contig.c @@ -30,47 +30,69 @@ static unsigned long max_gap; #endif /** - * show_mem - display a memory statistics summary + * show_mem - give short summary of memory stats * - * Just walks the pages in the system and describes where they're allocated. + * Shows a simple page count of reserved and used pages in the system. + * For discontig machines, it does this on a per-pgdat basis. */ -void -show_mem (void) +void show_mem(void) { - int i, total = 0, reserved = 0; - int shared = 0, cached = 0; + int i, total_reserved = 0; + int total_shared = 0, total_cached = 0; + unsigned long total_present = 0; + pg_data_t *pgdat; printk(KERN_INFO "Mem-info:\n"); show_free_areas(); - printk(KERN_INFO "Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10)); - i = max_mapnr; - for (i = 0; i < max_mapnr; i++) { - if (!pfn_valid(i)) { + printk(KERN_INFO "Node memory in pages:\n"); + for_each_online_pgdat(pgdat) { + unsigned long present; + unsigned long flags; + int shared = 0, cached = 0, reserved = 0; + + pgdat_resize_lock(pgdat, &flags); + present = pgdat->node_present_pages; + for(i = 0; i < pgdat->node_spanned_pages; i++) { + struct page *page; + if (pfn_valid(pgdat->node_start_pfn + i)) + page = pfn_to_page(pgdat->node_start_pfn + i); + else { #ifdef CONFIG_VIRTUAL_MEM_MAP - if (max_gap < LARGE_GAP) - continue; - i = vmemmap_find_next_valid_pfn(0, i) - 1; + if (max_gap < LARGE_GAP) + continue; #endif - continue; + i = vmemmap_find_next_valid_pfn(pgdat->node_id, + i) - 1; + continue; + } + if (PageReserved(page)) + reserved++; + else if (PageSwapCache(page)) + cached++; + else if (page_count(page)) + shared += page_count(page)-1; } - total++; - if (PageReserved(mem_map+i)) - reserved++; - else if (PageSwapCache(mem_map+i)) - cached++; - else if (page_count(mem_map + i)) - shared += page_count(mem_map + i) - 1; + pgdat_resize_unlock(pgdat, &flags); + total_present += present; + total_reserved += reserved; + total_cached += cached; + total_shared += shared; + printk(KERN_INFO "Node %4d: RAM: %11ld, rsvd: %8d, " + "shrd: %10d, swpd: %10d\n", pgdat->node_id, + present, reserved, shared, cached); } - printk(KERN_INFO "%d pages of RAM\n", total); - printk(KERN_INFO "%d reserved pages\n", reserved); - printk(KERN_INFO "%d pages shared\n", shared); - printk(KERN_INFO "%d pages swap cached\n", cached); - printk(KERN_INFO "%ld pages in page table cache\n", + printk(KERN_INFO "%ld pages of RAM\n", total_present); + printk(KERN_INFO "%d reserved pages\n", total_reserved); + printk(KERN_INFO "%d pages shared\n", total_shared); + printk(KERN_INFO "%d pages swap cached\n", total_cached); + printk(KERN_INFO "Total of %ld pages in page table cache\n", pgtable_quicklist_total_size()); + printk(KERN_INFO "%d free buffer pages\n", nr_free_buffer_pages()); } + /* physical address where the bootmem map is located */ unsigned long bootmap_start; -- cgit v1.2.3 From 524fd988bb83153ddc9cfea867129eb6efb7ac23 Mon Sep 17 00:00:00 2001 From: Bob Picco Date: Mon, 5 Feb 2007 16:20:08 -0800 Subject: [IA64] clean up sparsemem memory_present call Eliminate arch specific memory_present call ia64 NUMA by utilizing sparse_memory_present_with_active_regions. Acked-by: Mel Gorman Signed-off-by: Bob Picco Signed-off-by: Andrew Morton Signed-off-by: Tony Luck --- arch/ia64/mm/discontig.c | 36 +++--------------------------------- 1 file changed, 3 insertions(+), 33 deletions(-) (limited to 'arch') diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c index 999cefd2b226..6eae596c509d 100644 --- a/arch/ia64/mm/discontig.c +++ b/arch/ia64/mm/discontig.c @@ -412,37 +412,6 @@ static void __init memory_less_nodes(void) return; } -#ifdef CONFIG_SPARSEMEM -/** - * register_sparse_mem - notify SPARSEMEM that this memory range exists. - * @start: physical start of range - * @end: physical end of range - * @arg: unused - * - * Simply calls SPARSEMEM to register memory section(s). - */ -static int __init register_sparse_mem(unsigned long start, unsigned long end, - void *arg) -{ - int nid; - - start = __pa(start) >> PAGE_SHIFT; - end = __pa(end) >> PAGE_SHIFT; - nid = early_pfn_to_nid(start); - memory_present(nid, start, end); - - return 0; -} - -static void __init arch_sparse_init(void) -{ - efi_memmap_walk(register_sparse_mem, NULL); - sparse_init(); -} -#else -#define arch_sparse_init() do {} while (0) -#endif - /** * find_memory - walk the EFI memory map and setup the bootmem allocator * @@ -694,10 +663,11 @@ void __init paging_init(void) max_dma = virt_to_phys((void *) MAX_DMA_ADDRESS) >> PAGE_SHIFT; - arch_sparse_init(); - efi_memmap_walk(filter_rsvd_memory, count_node_pages); + sparse_memory_present_with_active_regions(MAX_NUMNODES); + sparse_init(); + #ifdef CONFIG_VIRTUAL_MEM_MAP vmalloc_end -= PAGE_ALIGN(ALIGN(max_low_pfn, MAX_ORDER_NR_PAGES) * sizeof(struct page)); -- cgit v1.2.3 From 86afa9eb88af2248bcc91d5b3568c63fdea65d6c Mon Sep 17 00:00:00 2001 From: Fenghua Yu Date: Mon, 5 Feb 2007 16:07:57 -0800 Subject: [IA64] Hook up getcpu system call for IA64 getcpu system call returns cpu# and node# on which this system call and its caller are running. This patch hooks up its implementation on IA64. Signed-off-by: Fenghua Yu Signed-off-by: Tony Luck --- arch/ia64/kernel/entry.S | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S index 15234ed3a341..e7873eeae448 100644 --- a/arch/ia64/kernel/entry.S +++ b/arch/ia64/kernel/entry.S @@ -1610,5 +1610,7 @@ sys_call_table: data8 sys_sync_file_range // 1300 data8 sys_tee data8 sys_vmsplice + data8 sys_ni_syscall // reserved for move_pages + data8 sys_getcpu .org sys_call_table + 8*NR_syscalls // guard against failures to increase NR_syscalls -- cgit v1.2.3 From cde14bbfb3aa79b479db35bd29e6c083513d8614 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Mon, 5 Feb 2007 18:46:40 -0800 Subject: [IA64] swiotlb bug fixes This patch fixes - marking I-cache clean of pages DMAed to now only done for IA64 - broken multiple inclusion in include/asm-x86_64/swiotlb.h - missing call to mark_clean in swiotlb_sync_sg() - a (perhaps only theoretical) issue in swiotlb_dma_supported() when io_tlb_end is exactly at the end of memory Signed-off-by: Jan Beulich Signed-off-by: Andrew Morton Signed-off-by: Tony Luck --- arch/ia64/mm/init.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'arch') diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c index 8b7599808dd5..faaca21a3718 100644 --- a/arch/ia64/mm/init.c +++ b/arch/ia64/mm/init.c @@ -129,6 +129,25 @@ lazy_mmu_prot_update (pte_t pte) set_bit(PG_arch_1, &page->flags); /* mark page as clean */ } +/* + * Since DMA is i-cache coherent, any (complete) pages that were written via + * DMA can be marked as "clean" so that lazy_mmu_prot_update() doesn't have to + * flush them when they get mapped into an executable vm-area. + */ +void +dma_mark_clean(void *addr, size_t size) +{ + unsigned long pg_addr, end; + + pg_addr = PAGE_ALIGN((unsigned long) addr); + end = (unsigned long) addr + size; + while (pg_addr + PAGE_SIZE <= end) { + struct page *page = virt_to_page(pg_addr); + set_bit(PG_arch_1, &page->flags); + pg_addr += PAGE_SIZE; + } +} + inline void ia64_set_rbs_bot (void) { -- cgit v1.2.3 From 563aaf064f3776623ff5e7aef511ac2eb7e5f0bb Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Mon, 5 Feb 2007 18:51:25 -0800 Subject: [IA64] swiotlb cleanup - add proper __init decoration to swiotlb's init code (and the code calling it, where not already the case) - replace uses of 'unsigned long' with dma_addr_t where appropriate - do miscellaneous simplicfication and cleanup Signed-off-by: Jan Beulich Signed-off-by: Andrew Morton Signed-off-by: Tony Luck --- arch/x86_64/kernel/pci-swiotlb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/pci-swiotlb.c b/arch/x86_64/kernel/pci-swiotlb.c index 697f0aa794b9..eb18be5a6569 100644 --- a/arch/x86_64/kernel/pci-swiotlb.c +++ b/arch/x86_64/kernel/pci-swiotlb.c @@ -29,7 +29,7 @@ struct dma_mapping_ops swiotlb_dma_ops = { .dma_supported = NULL, }; -void pci_swiotlb_init(void) +void __init pci_swiotlb_init(void) { /* don't initialize swiotlb if iommu=off (no_iommu=1) */ if (!iommu_detected && !no_iommu && end_pfn > MAX_DMA32_PFN) -- cgit v1.2.3 From b6ec8f069bf202d2bd888aa9137b2cc3aad4c573 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Mon, 8 Jan 2007 00:20:24 +0900 Subject: [MIPS] Remove unused rm9k_cpu_irq_disable() rm9k_cpu_irq_disable() is unused since commit 1603b5aca4f15b34848fb5594d0c7b6333b99144. Remove it. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/kernel/irq-rm9000.c | 9 --------- 1 file changed, 9 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/irq-rm9000.c b/arch/mips/kernel/irq-rm9000.c index 0e6f4c5349d2..2e68e4b639f7 100644 --- a/arch/mips/kernel/irq-rm9000.c +++ b/arch/mips/kernel/irq-rm9000.c @@ -39,15 +39,6 @@ static inline void rm9k_cpu_irq_enable(unsigned int irq) local_irq_restore(flags); } -static void rm9k_cpu_irq_disable(unsigned int irq) -{ - unsigned long flags; - - local_irq_save(flags); - mask_rm9k_irq(irq); - local_irq_restore(flags); -} - /* * Performance counter interrupts are global on all processors. */ -- cgit v1.2.3 From 97dcb82de6cc99a5669eb8e342efc24cceb1e77e Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Mon, 8 Jan 2007 02:14:29 +0900 Subject: [MIPS] Define MIPS_CPU_IRQ_BASE in generic header The irq_base for {mips,rm7k,rm9k}_cpu_irq_init() are constant on all platforms and are same value on most platforms (0 or 16, depends on CONFIG_I8259). Define them in asm-mips/mach-generic/irq.h and make them customizable. This will save a few cycle on each CPU interrupt. A good side effect is removing some dependencies to MALTA in generic SMTC code. Although MIPS_CPU_IRQ_BASE is customizable, this patch changes irq mappings on DDB5477, EMMA2RH and MIPS_SIM, since really customizing them might cause some header dependency problem and there seems no good reason to customize it. So currently only VR41XX is using custom MIPS_CPU_IRQ_BASE value, which is 0 regardless of CONFIG_I8259. Testing this patch on those platforms is greatly appreciated. Thank you. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/basler/excite/excite_irq.c | 6 +++--- arch/mips/cobalt/irq.c | 2 +- arch/mips/ddb5xxx/ddb5477/irq.c | 4 ++-- arch/mips/dec/setup.c | 12 ++++++------ arch/mips/emma2rh/markeins/irq.c | 2 +- arch/mips/gt64120/momenco_ocelot/irq.c | 4 ++-- arch/mips/gt64120/wrppmc/irq.c | 2 +- arch/mips/kernel/irq-rm7000.c | 11 ++++------- arch/mips/kernel/irq-rm9000.c | 11 ++++------- arch/mips/kernel/irq_cpu.c | 17 +++++++---------- arch/mips/kernel/rtlx.c | 4 ++-- arch/mips/kernel/smp-mt.c | 9 ++++----- arch/mips/kernel/smtc.c | 12 +----------- arch/mips/mips-boards/atlas/atlas_int.c | 2 +- arch/mips/mips-boards/malta/malta_int.c | 2 +- arch/mips/mips-boards/sead/sead_int.c | 2 +- arch/mips/mips-boards/sim/sim_int.c | 6 ++---- arch/mips/momentum/jaguar_atx/irq.c | 4 ++-- arch/mips/momentum/ocelot_3/irq.c | 2 +- arch/mips/momentum/ocelot_c/irq.c | 2 +- arch/mips/momentum/ocelot_g/irq.c | 4 ++-- arch/mips/pmc-sierra/yosemite/irq.c | 6 +++--- arch/mips/sgi-ip22/ip22-int.c | 5 ++--- arch/mips/vr41xx/common/irq.c | 2 +- 24 files changed, 55 insertions(+), 78 deletions(-) (limited to 'arch') diff --git a/arch/mips/basler/excite/excite_irq.c b/arch/mips/basler/excite/excite_irq.c index 2e2061a286c5..1ecab6350421 100644 --- a/arch/mips/basler/excite/excite_irq.c +++ b/arch/mips/basler/excite/excite_irq.c @@ -47,9 +47,9 @@ extern asmlinkage void excite_handle_int(void); */ void __init arch_init_irq(void) { - mips_cpu_irq_init(0); - rm7k_cpu_irq_init(8); - rm9k_cpu_irq_init(12); + mips_cpu_irq_init(); + rm7k_cpu_irq_init(); + rm9k_cpu_irq_init(); #ifdef CONFIG_KGDB excite_kgdb_init(); diff --git a/arch/mips/cobalt/irq.c b/arch/mips/cobalt/irq.c index 4c46f0e73783..fe93b846923b 100644 --- a/arch/mips/cobalt/irq.c +++ b/arch/mips/cobalt/irq.c @@ -104,7 +104,7 @@ void __init arch_init_irq(void) GT_WRITE(GT_INTRMASK_OFS, 0); init_i8259_irqs(); /* 0 ... 15 */ - mips_cpu_irq_init(COBALT_CPU_IRQ); /* 16 ... 23 */ + mips_cpu_irq_init(); /* 16 ... 23 */ /* * Mask all cpu interrupts diff --git a/arch/mips/ddb5xxx/ddb5477/irq.c b/arch/mips/ddb5xxx/ddb5477/irq.c index a8bd2e66705c..bd7cd7c5f485 100644 --- a/arch/mips/ddb5xxx/ddb5477/irq.c +++ b/arch/mips/ddb5xxx/ddb5477/irq.c @@ -17,6 +17,7 @@ #include #include +#include #include #include #include @@ -73,7 +74,6 @@ set_pci_int_attr(u32 pci, u32 intn, u32 active, u32 trigger) } extern void vrc5477_irq_init(u32 base); -extern void mips_cpu_irq_init(u32 base); static struct irqaction irq_cascade = { no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL }; void __init arch_init_irq(void) @@ -125,7 +125,7 @@ void __init arch_init_irq(void) /* init all controllers */ init_i8259_irqs(); - mips_cpu_irq_init(CPU_IRQ_BASE); + mips_cpu_irq_init(); vrc5477_irq_init(VRC5477_IRQ_BASE); diff --git a/arch/mips/dec/setup.c b/arch/mips/dec/setup.c index d34032ac492a..1058e2f409bb 100644 --- a/arch/mips/dec/setup.c +++ b/arch/mips/dec/setup.c @@ -234,7 +234,7 @@ static void __init dec_init_kn01(void) memcpy(&cpu_mask_nr_tbl, &kn01_cpu_mask_nr_tbl, sizeof(kn01_cpu_mask_nr_tbl)); - mips_cpu_irq_init(DEC_CPU_IRQ_BASE); + mips_cpu_irq_init(); } /* dec_init_kn01 */ @@ -309,7 +309,7 @@ static void __init dec_init_kn230(void) memcpy(&cpu_mask_nr_tbl, &kn230_cpu_mask_nr_tbl, sizeof(kn230_cpu_mask_nr_tbl)); - mips_cpu_irq_init(DEC_CPU_IRQ_BASE); + mips_cpu_irq_init(); } /* dec_init_kn230 */ @@ -403,7 +403,7 @@ static void __init dec_init_kn02(void) memcpy(&asic_mask_nr_tbl, &kn02_asic_mask_nr_tbl, sizeof(kn02_asic_mask_nr_tbl)); - mips_cpu_irq_init(DEC_CPU_IRQ_BASE); + mips_cpu_irq_init(); init_kn02_irqs(KN02_IRQ_BASE); } /* dec_init_kn02 */ @@ -504,7 +504,7 @@ static void __init dec_init_kn02ba(void) memcpy(&asic_mask_nr_tbl, &kn02ba_asic_mask_nr_tbl, sizeof(kn02ba_asic_mask_nr_tbl)); - mips_cpu_irq_init(DEC_CPU_IRQ_BASE); + mips_cpu_irq_init(); init_ioasic_irqs(IO_IRQ_BASE); } /* dec_init_kn02ba */ @@ -601,7 +601,7 @@ static void __init dec_init_kn02ca(void) memcpy(&asic_mask_nr_tbl, &kn02ca_asic_mask_nr_tbl, sizeof(kn02ca_asic_mask_nr_tbl)); - mips_cpu_irq_init(DEC_CPU_IRQ_BASE); + mips_cpu_irq_init(); init_ioasic_irqs(IO_IRQ_BASE); } /* dec_init_kn02ca */ @@ -702,7 +702,7 @@ static void __init dec_init_kn03(void) memcpy(&asic_mask_nr_tbl, &kn03_asic_mask_nr_tbl, sizeof(kn03_asic_mask_nr_tbl)); - mips_cpu_irq_init(DEC_CPU_IRQ_BASE); + mips_cpu_irq_init(); init_ioasic_irqs(IO_IRQ_BASE); } /* dec_init_kn03 */ diff --git a/arch/mips/emma2rh/markeins/irq.c b/arch/mips/emma2rh/markeins/irq.c index c93369cb4115..3299b6dfe764 100644 --- a/arch/mips/emma2rh/markeins/irq.c +++ b/arch/mips/emma2rh/markeins/irq.c @@ -106,7 +106,7 @@ void __init arch_init_irq(void) emma2rh_irq_init(EMMA2RH_IRQ_BASE); emma2rh_sw_irq_init(EMMA2RH_SW_IRQ_BASE); emma2rh_gpio_irq_init(EMMA2RH_GPIO_IRQ_BASE); - mips_cpu_irq_init(CPU_IRQ_BASE); + mips_cpu_irq_init(); /* setup cascade interrupts */ setup_irq(EMMA2RH_IRQ_BASE + EMMA2RH_SW_CASCADE, &irq_cascade); diff --git a/arch/mips/gt64120/momenco_ocelot/irq.c b/arch/mips/gt64120/momenco_ocelot/irq.c index d9294401ccb0..2585d9dbda33 100644 --- a/arch/mips/gt64120/momenco_ocelot/irq.c +++ b/arch/mips/gt64120/momenco_ocelot/irq.c @@ -90,6 +90,6 @@ void __init arch_init_irq(void) clear_c0_status(ST0_IM); local_irq_disable(); - mips_cpu_irq_init(0); - rm7k_cpu_irq_init(8); + mips_cpu_irq_init(); + rm7k_cpu_irq_init(); } diff --git a/arch/mips/gt64120/wrppmc/irq.c b/arch/mips/gt64120/wrppmc/irq.c index eedfc24e1eae..d3d96591780e 100644 --- a/arch/mips/gt64120/wrppmc/irq.c +++ b/arch/mips/gt64120/wrppmc/irq.c @@ -63,7 +63,7 @@ void gt64120_init_pic(void) void __init arch_init_irq(void) { /* IRQ 0 - 7 are for MIPS common irq_cpu controller */ - mips_cpu_irq_init(0); + mips_cpu_irq_init(); gt64120_init_pic(); } diff --git a/arch/mips/kernel/irq-rm7000.c b/arch/mips/kernel/irq-rm7000.c index 123324ba8c14..a60cfe5f4d18 100644 --- a/arch/mips/kernel/irq-rm7000.c +++ b/arch/mips/kernel/irq-rm7000.c @@ -17,16 +17,14 @@ #include #include -static int irq_base; - static inline void unmask_rm7k_irq(unsigned int irq) { - set_c0_intcontrol(0x100 << (irq - irq_base)); + set_c0_intcontrol(0x100 << (irq - RM7K_CPU_IRQ_BASE)); } static inline void mask_rm7k_irq(unsigned int irq) { - clear_c0_intcontrol(0x100 << (irq - irq_base)); + clear_c0_intcontrol(0x100 << (irq - RM7K_CPU_IRQ_BASE)); } static struct irq_chip rm7k_irq_controller = { @@ -37,8 +35,9 @@ static struct irq_chip rm7k_irq_controller = { .unmask = unmask_rm7k_irq, }; -void __init rm7k_cpu_irq_init(int base) +void __init rm7k_cpu_irq_init(void) { + int base = RM7K_CPU_IRQ_BASE; int i; clear_c0_intcontrol(0x00000f00); /* Mask all */ @@ -46,6 +45,4 @@ void __init rm7k_cpu_irq_init(int base) for (i = base; i < base + 4; i++) set_irq_chip_and_handler(i, &rm7k_irq_controller, handle_level_irq); - - irq_base = base; } diff --git a/arch/mips/kernel/irq-rm9000.c b/arch/mips/kernel/irq-rm9000.c index 2e68e4b639f7..27886db89a65 100644 --- a/arch/mips/kernel/irq-rm9000.c +++ b/arch/mips/kernel/irq-rm9000.c @@ -18,16 +18,14 @@ #include #include -static int irq_base; - static inline void unmask_rm9k_irq(unsigned int irq) { - set_c0_intcontrol(0x1000 << (irq - irq_base)); + set_c0_intcontrol(0x1000 << (irq - RM9K_CPU_IRQ_BASE)); } static inline void mask_rm9k_irq(unsigned int irq) { - clear_c0_intcontrol(0x1000 << (irq - irq_base)); + clear_c0_intcontrol(0x1000 << (irq - RM9K_CPU_IRQ_BASE)); } static inline void rm9k_cpu_irq_enable(unsigned int irq) @@ -93,8 +91,9 @@ unsigned int rm9000_perfcount_irq; EXPORT_SYMBOL(rm9000_perfcount_irq); -void __init rm9k_cpu_irq_init(int base) +void __init rm9k_cpu_irq_init(void) { + int base = RM9K_CPU_IRQ_BASE; int i; clear_c0_intcontrol(0x0000f000); /* Mask all */ @@ -106,6 +105,4 @@ void __init rm9k_cpu_irq_init(int base) rm9000_perfcount_irq = base + 1; set_irq_chip_and_handler(rm9000_perfcount_irq, &rm9k_perfcounter_irq, handle_level_irq); - - irq_base = base; } diff --git a/arch/mips/kernel/irq_cpu.c b/arch/mips/kernel/irq_cpu.c index fcc86b96ccf6..6e73ddaeae74 100644 --- a/arch/mips/kernel/irq_cpu.c +++ b/arch/mips/kernel/irq_cpu.c @@ -25,7 +25,7 @@ * Don't even think about using this on SMP. You have been warned. * * This file exports one global function: - * void mips_cpu_irq_init(int irq_base); + * void mips_cpu_irq_init(void); */ #include #include @@ -36,17 +36,15 @@ #include #include -static int mips_cpu_irq_base; - static inline void unmask_mips_irq(unsigned int irq) { - set_c0_status(0x100 << (irq - mips_cpu_irq_base)); + set_c0_status(0x100 << (irq - MIPS_CPU_IRQ_BASE)); irq_enable_hazard(); } static inline void mask_mips_irq(unsigned int irq) { - clear_c0_status(0x100 << (irq - mips_cpu_irq_base)); + clear_c0_status(0x100 << (irq - MIPS_CPU_IRQ_BASE)); irq_disable_hazard(); } @@ -70,7 +68,7 @@ static unsigned int mips_mt_cpu_irq_startup(unsigned int irq) { unsigned int vpflags = dvpe(); - clear_c0_cause(0x100 << (irq - mips_cpu_irq_base)); + clear_c0_cause(0x100 << (irq - MIPS_CPU_IRQ_BASE)); evpe(vpflags); unmask_mips_mt_irq(irq); @@ -84,7 +82,7 @@ static unsigned int mips_mt_cpu_irq_startup(unsigned int irq) static void mips_mt_cpu_irq_ack(unsigned int irq) { unsigned int vpflags = dvpe(); - clear_c0_cause(0x100 << (irq - mips_cpu_irq_base)); + clear_c0_cause(0x100 << (irq - MIPS_CPU_IRQ_BASE)); evpe(vpflags); mask_mips_mt_irq(irq); } @@ -99,8 +97,9 @@ static struct irq_chip mips_mt_cpu_irq_controller = { .eoi = unmask_mips_mt_irq, }; -void __init mips_cpu_irq_init(int irq_base) +void __init mips_cpu_irq_init(void) { + int irq_base = MIPS_CPU_IRQ_BASE; int i; /* Mask interrupts. */ @@ -118,6 +117,4 @@ void __init mips_cpu_irq_init(int irq_base) for (i = irq_base + 2; i < irq_base + 8; i++) set_irq_chip_and_handler(i, &mips_cpu_irq_controller, handle_level_irq); - - mips_cpu_irq_base = irq_base; } diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c index 5a99e3e0c96d..8610f4a925e9 100644 --- a/arch/mips/kernel/rtlx.c +++ b/arch/mips/kernel/rtlx.c @@ -63,7 +63,7 @@ extern void *vpe_get_shared(int index); static void rtlx_dispatch(void) { - do_IRQ(MIPSCPU_INT_BASE + MIPS_CPU_RTLX_IRQ); + do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_RTLX_IRQ); } @@ -491,7 +491,7 @@ static struct irqaction rtlx_irq = { .name = "RTLX", }; -static int rtlx_irq_num = MIPSCPU_INT_BASE + MIPS_CPU_RTLX_IRQ; +static int rtlx_irq_num = MIPS_CPU_IRQ_BASE + MIPS_CPU_RTLX_IRQ; static char register_chrdev_failed[] __initdata = KERN_ERR "rtlx_module_init: unable to register device\n"; diff --git a/arch/mips/kernel/smp-mt.c b/arch/mips/kernel/smp-mt.c index 1ee689c0e0c9..64b62bdfb4f6 100644 --- a/arch/mips/kernel/smp-mt.c +++ b/arch/mips/kernel/smp-mt.c @@ -35,7 +35,6 @@ #include #include #include -#include /* This is f*cking wrong */ #define MIPS_CPU_IPI_RESCHED_IRQ 0 #define MIPS_CPU_IPI_CALL_IRQ 1 @@ -108,12 +107,12 @@ void __init sanitize_tlb_entries(void) static void ipi_resched_dispatch(void) { - do_IRQ(MIPSCPU_INT_BASE + MIPS_CPU_IPI_RESCHED_IRQ); + do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ); } static void ipi_call_dispatch(void) { - do_IRQ(MIPSCPU_INT_BASE + MIPS_CPU_IPI_CALL_IRQ); + do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ); } static irqreturn_t ipi_resched_interrupt(int irq, void *dev_id) @@ -270,8 +269,8 @@ void __init plat_prepare_cpus(unsigned int max_cpus) set_vi_handler(MIPS_CPU_IPI_CALL_IRQ, ipi_call_dispatch); } - cpu_ipi_resched_irq = MIPSCPU_INT_BASE + MIPS_CPU_IPI_RESCHED_IRQ; - cpu_ipi_call_irq = MIPSCPU_INT_BASE + MIPS_CPU_IPI_CALL_IRQ; + cpu_ipi_resched_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ; + cpu_ipi_call_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ; setup_irq(cpu_ipi_resched_irq, &irq_resched); setup_irq(cpu_ipi_call_irq, &irq_call); diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c index 6a857bf030b0..6a2763143771 100644 --- a/arch/mips/kernel/smtc.c +++ b/arch/mips/kernel/smtc.c @@ -26,16 +26,6 @@ * This file should be built into the kernel only if CONFIG_MIPS_MT_SMTC is set. */ -/* - * MIPSCPU_INT_BASE is identically defined in both - * asm-mips/mips-boards/maltaint.h and asm-mips/mips-boards/simint.h, - * but as yet there's no properly organized include structure that - * will ensure that the right *int.h file will be included for a - * given platform build. - */ - -#define MIPSCPU_INT_BASE 16 - #define MIPS_CPU_IPI_IRQ 1 #define LOCK_MT_PRA() \ @@ -921,7 +911,7 @@ void smtc_timer_broadcast(int vpe) * interrupts. */ -static int cpu_ipi_irq = MIPSCPU_INT_BASE + MIPS_CPU_IPI_IRQ; +static int cpu_ipi_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_IRQ; static irqreturn_t ipi_interrupt(int irq, void *dev_idm) { diff --git a/arch/mips/mips-boards/atlas/atlas_int.c b/arch/mips/mips-boards/atlas/atlas_int.c index 43dba6ce6603..85482a631e8c 100644 --- a/arch/mips/mips-boards/atlas/atlas_int.c +++ b/arch/mips/mips-boards/atlas/atlas_int.c @@ -238,7 +238,7 @@ void __init arch_init_irq(void) init_atlas_irqs(ATLAS_INT_BASE); if (!cpu_has_veic) - mips_cpu_irq_init(MIPSCPU_INT_BASE); + mips_cpu_irq_init(); switch(mips_revision_corid) { case MIPS_REVISION_CORID_CORE_MSC: diff --git a/arch/mips/mips-boards/malta/malta_int.c b/arch/mips/mips-boards/malta/malta_int.c index 90ad5bf3e2f1..d9ddb170e595 100644 --- a/arch/mips/mips-boards/malta/malta_int.c +++ b/arch/mips/mips-boards/malta/malta_int.c @@ -310,7 +310,7 @@ void __init arch_init_irq(void) init_i8259_irqs(); if (!cpu_has_veic) - mips_cpu_irq_init (MIPSCPU_INT_BASE); + mips_cpu_irq_init(); switch(mips_revision_corid) { case MIPS_REVISION_CORID_CORE_MSC: diff --git a/arch/mips/mips-boards/sead/sead_int.c b/arch/mips/mips-boards/sead/sead_int.c index 874ccb0066b8..c4b9de3a7f27 100644 --- a/arch/mips/mips-boards/sead/sead_int.c +++ b/arch/mips/mips-boards/sead/sead_int.c @@ -113,5 +113,5 @@ asmlinkage void plat_irq_dispatch(void) void __init arch_init_irq(void) { - mips_cpu_irq_init(MIPSCPU_INT_BASE); + mips_cpu_irq_init(); } diff --git a/arch/mips/mips-boards/sim/sim_int.c b/arch/mips/mips-boards/sim/sim_int.c index 2ce449dce6f2..15ac0655c1ff 100644 --- a/arch/mips/mips-boards/sim/sim_int.c +++ b/arch/mips/mips-boards/sim/sim_int.c @@ -21,9 +21,7 @@ #include #include #include - - -extern void mips_cpu_irq_init(int); +#include static inline int clz(unsigned long x) { @@ -86,5 +84,5 @@ asmlinkage void plat_irq_dispatch(void) void __init arch_init_irq(void) { - mips_cpu_irq_init(MIPSCPU_INT_BASE); + mips_cpu_irq_init(); } diff --git a/arch/mips/momentum/jaguar_atx/irq.c b/arch/mips/momentum/jaguar_atx/irq.c index 2efb25aa1aed..f2b432585df2 100644 --- a/arch/mips/momentum/jaguar_atx/irq.c +++ b/arch/mips/momentum/jaguar_atx/irq.c @@ -82,8 +82,8 @@ void __init arch_init_irq(void) */ clear_c0_status(ST0_IM); - mips_cpu_irq_init(0); - rm7k_cpu_irq_init(8); + mips_cpu_irq_init(); + rm7k_cpu_irq_init(); /* set up the cascading interrupts */ setup_irq(8, &cascade_mv64340); diff --git a/arch/mips/momentum/ocelot_3/irq.c b/arch/mips/momentum/ocelot_3/irq.c index cea0e5deb80e..3862d1d1add4 100644 --- a/arch/mips/momentum/ocelot_3/irq.c +++ b/arch/mips/momentum/ocelot_3/irq.c @@ -65,7 +65,7 @@ void __init arch_init_irq(void) */ clear_c0_status(ST0_IM | ST0_BEV); - rm7k_cpu_irq_init(8); + rm7k_cpu_irq_init(); /* set up the cascading interrupts */ setup_irq(8, &cascade_mv64340); /* unmask intControl IM8, IRQ 9 */ diff --git a/arch/mips/momentum/ocelot_c/irq.c b/arch/mips/momentum/ocelot_c/irq.c index ea65223a6d2c..40472f7944d7 100644 --- a/arch/mips/momentum/ocelot_c/irq.c +++ b/arch/mips/momentum/ocelot_c/irq.c @@ -94,7 +94,7 @@ void __init arch_init_irq(void) */ clear_c0_status(ST0_IM); - mips_cpu_irq_init(0); + mips_cpu_irq_init(); /* set up the cascading interrupts */ setup_irq(3, &cascade_fpga); diff --git a/arch/mips/momentum/ocelot_g/irq.c b/arch/mips/momentum/ocelot_g/irq.c index da46524e87cb..273541fe7087 100644 --- a/arch/mips/momentum/ocelot_g/irq.c +++ b/arch/mips/momentum/ocelot_g/irq.c @@ -94,8 +94,8 @@ void __init arch_init_irq(void) clear_c0_status(ST0_IM); local_irq_disable(); - mips_cpu_irq_init(0); - rm7k_cpu_irq_init(8); + mips_cpu_irq_init(); + rm7k_cpu_irq_init(); gt64240_irq_init(); } diff --git a/arch/mips/pmc-sierra/yosemite/irq.c b/arch/mips/pmc-sierra/yosemite/irq.c index adb048527e76..428d1f45a287 100644 --- a/arch/mips/pmc-sierra/yosemite/irq.c +++ b/arch/mips/pmc-sierra/yosemite/irq.c @@ -148,9 +148,9 @@ void __init arch_init_irq(void) { clear_c0_status(ST0_IM); - mips_cpu_irq_init(0); - rm7k_cpu_irq_init(8); - rm9k_cpu_irq_init(12); + mips_cpu_irq_init(); + rm7k_cpu_irq_init(); + rm9k_cpu_irq_init(); #ifdef CONFIG_KGDB /* At this point, initialize the second serial port */ diff --git a/arch/mips/sgi-ip22/ip22-int.c b/arch/mips/sgi-ip22/ip22-int.c index c44f8be0644f..f3d2ae374c72 100644 --- a/arch/mips/sgi-ip22/ip22-int.c +++ b/arch/mips/sgi-ip22/ip22-int.c @@ -19,6 +19,7 @@ #include #include +#include #include #include @@ -253,8 +254,6 @@ asmlinkage void plat_irq_dispatch(void) indy_8254timer_irq(); } -extern void mips_cpu_irq_init(unsigned int irq_base); - void __init arch_init_irq(void) { int i; @@ -316,7 +315,7 @@ void __init arch_init_irq(void) sgint->cmeimask1 = 0; /* init CPU irqs */ - mips_cpu_irq_init(SGINT_CPU); + mips_cpu_irq_init(); for (i = SGINT_LOCAL0; i < SGI_INTERRUPTS; i++) { struct irq_chip *handler; diff --git a/arch/mips/vr41xx/common/irq.c b/arch/mips/vr41xx/common/irq.c index 16decf4ac2f4..697fcc260141 100644 --- a/arch/mips/vr41xx/common/irq.c +++ b/arch/mips/vr41xx/common/irq.c @@ -117,5 +117,5 @@ asmlinkage void plat_irq_dispatch(void) void __init arch_init_irq(void) { - mips_cpu_irq_init(MIPS_CPU_IRQ_BASE); + mips_cpu_irq_init(); } -- cgit v1.2.3 From 2fa7937bd8922e1fe4aae6a45e7e787fa45d6043 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Sun, 14 Jan 2007 23:41:42 +0900 Subject: [MIPS] Make I8259A_IRQ_BASE customizable Move I8259A_IRQ_BASE from asm/i8259.h to asm/mach-generic/irq.h and make it really customizable. And remove I8259_IRQ_BASE declared on some platforms. Currently only NEC_CMBVR4133 is using custom I8259A_IRQ_BASE value. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/ddb5xxx/ddb5477/irq.c | 5 ++-- arch/mips/kernel/i8259.c | 20 ++++++++++---- arch/mips/pci/fixup-vr4133.c | 13 ++------- arch/mips/vr41xx/nec-cmbvr4133/irq.c | 53 ++---------------------------------- 4 files changed, 20 insertions(+), 71 deletions(-) (limited to 'arch') diff --git a/arch/mips/ddb5xxx/ddb5477/irq.c b/arch/mips/ddb5xxx/ddb5477/irq.c index bd7cd7c5f485..2b23234a5b95 100644 --- a/arch/mips/ddb5xxx/ddb5477/irq.c +++ b/arch/mips/ddb5xxx/ddb5477/irq.c @@ -146,8 +146,7 @@ u8 i8259_interrupt_ack(void) irq = *(volatile u8 *) KSEG1ADDR(DDB_PCI_IACK_BASE); ddb_out32(DDB_PCIINIT10, reg); - /* i8259.c set the base vector to be 0x0 */ - return irq + I8259_IRQ_BASE; + return irq; } /* * the first level int-handler will jump here if it is a vrc5477 irq @@ -177,7 +176,7 @@ static void vrc5477_irq_dispatch(void) /* check for i8259 interrupts */ if (intStatus & (1 << VRC5477_I8259_CASCADE)) { int i8259_irq = i8259_interrupt_ack(); - do_IRQ(I8259_IRQ_BASE + i8259_irq); + do_IRQ(i8259_irq); return; } } diff --git a/arch/mips/kernel/i8259.c b/arch/mips/kernel/i8259.c index b59a676c6d0e..91de4223d638 100644 --- a/arch/mips/kernel/i8259.c +++ b/arch/mips/kernel/i8259.c @@ -54,9 +54,11 @@ static unsigned int cached_irq_mask = 0xffff; void disable_8259A_irq(unsigned int irq) { - unsigned int mask = 1 << irq; + unsigned int mask; unsigned long flags; + irq -= I8259A_IRQ_BASE; + mask = 1 << irq; spin_lock_irqsave(&i8259A_lock, flags); cached_irq_mask |= mask; if (irq & 8) @@ -68,9 +70,11 @@ void disable_8259A_irq(unsigned int irq) void enable_8259A_irq(unsigned int irq) { - unsigned int mask = ~(1 << irq); + unsigned int mask; unsigned long flags; + irq -= I8259A_IRQ_BASE; + mask = ~(1 << irq); spin_lock_irqsave(&i8259A_lock, flags); cached_irq_mask &= mask; if (irq & 8) @@ -82,10 +86,12 @@ void enable_8259A_irq(unsigned int irq) int i8259A_irq_pending(unsigned int irq) { - unsigned int mask = 1 << irq; + unsigned int mask; unsigned long flags; int ret; + irq -= I8259A_IRQ_BASE; + mask = 1 << irq; spin_lock_irqsave(&i8259A_lock, flags); if (irq < 8) ret = inb(PIC_MASTER_CMD) & mask; @@ -134,9 +140,11 @@ static inline int i8259A_irq_real(unsigned int irq) */ void mask_and_ack_8259A(unsigned int irq) { - unsigned int irqmask = 1 << irq; + unsigned int irqmask; unsigned long flags; + irq -= I8259A_IRQ_BASE; + irqmask = 1 << irq; spin_lock_irqsave(&i8259A_lock, flags); /* * Lightweight spurious IRQ detection. We do not want @@ -322,8 +330,8 @@ void __init init_i8259_irqs (void) init_8259A(0); - for (i = 0; i < 16; i++) + for (i = I8259A_IRQ_BASE; i < I8259A_IRQ_BASE + 16; i++) set_irq_chip_and_handler(i, &i8259A_chip, handle_level_irq); - setup_irq(PIC_CASCADE_IR, &irq2); + setup_irq(I8259A_IRQ_BASE + PIC_CASCADE_IR, &irq2); } diff --git a/arch/mips/pci/fixup-vr4133.c b/arch/mips/pci/fixup-vr4133.c index 597b89764ba1..b1a5b318f26f 100644 --- a/arch/mips/pci/fixup-vr4133.c +++ b/arch/mips/pci/fixup-vr4133.c @@ -19,6 +19,7 @@ #include #include +#include #include extern int vr4133_rockhopper; @@ -160,17 +161,7 @@ int rockhopper_get_irq(struct pci_dev *dev, u8 pin, u8 slot) #ifdef CONFIG_ROCKHOPPER void i8259_init(void) { - outb(0x11, 0x20); /* Master ICW1 */ - outb(I8259_IRQ_BASE, 0x21); /* Master ICW2 */ - outb(0x04, 0x21); /* Master ICW3 */ - outb(0x01, 0x21); /* Master ICW4 */ - outb(0xff, 0x21); /* Master IMW */ - - outb(0x11, 0xa0); /* Slave ICW1 */ - outb(I8259_IRQ_BASE + 8, 0xa1); /* Slave ICW2 */ - outb(0x02, 0xa1); /* Slave ICW3 */ - outb(0x01, 0xa1); /* Slave ICW4 */ - outb(0xff, 0xa1); /* Slave IMW */ + init_i8259_irqs(); outb(0x00, 0x4d0); outb(0x02, 0x4d1); /* USB IRQ9 is level */ diff --git a/arch/mips/vr41xx/nec-cmbvr4133/irq.c b/arch/mips/vr41xx/nec-cmbvr4133/irq.c index 128ed8d6f111..7d2d076b0f54 100644 --- a/arch/mips/vr41xx/nec-cmbvr4133/irq.c +++ b/arch/mips/vr41xx/nec-cmbvr4133/irq.c @@ -21,60 +21,16 @@ #include #include +#include #include -extern void enable_8259A_irq(unsigned int irq); -extern void disable_8259A_irq(unsigned int irq); -extern void mask_and_ack_8259A(unsigned int irq); -extern void init_8259A(int hoge); - extern int vr4133_rockhopper; -static void enable_i8259_irq(unsigned int irq) -{ - enable_8259A_irq(irq - I8259_IRQ_BASE); -} - -static void disable_i8259_irq(unsigned int irq) -{ - disable_8259A_irq(irq - I8259_IRQ_BASE); -} - -static void ack_i8259_irq(unsigned int irq) -{ - mask_and_ack_8259A(irq - I8259_IRQ_BASE); -} - -static struct irq_chip i8259_irq_type = { - .typename = "XT-PIC", - .ack = ack_i8259_irq, - .mask = disable_i8259_irq, - .mask_ack = ack_i8259_irq, - .unmask = enable_i8259_irq, -}; - static int i8259_get_irq_number(int irq) { - unsigned long isr; - - isr = inb(0x20); - irq = ffz(~isr); - if (irq == 2) { - isr = inb(0xa0); - irq = 8 + ffz(~isr); - } - - if (irq < 0 || irq > 15) - return -EINVAL; - - return I8259_IRQ_BASE + irq; + return i8259_irq(); } -static struct irqaction i8259_slave_cascade = { - .handler = &no_action, - .name = "cascade", -}; - void __init rockhopper_init_irq(void) { int i; @@ -84,11 +40,6 @@ void __init rockhopper_init_irq(void) return; } - for (i = I8259_IRQ_BASE; i <= I8259_IRQ_LAST; i++) - set_irq_chip_and_handler(i, &i8259_irq_type, handle_level_irq); - - setup_irq(I8259_SLAVE_IRQ, &i8259_slave_cascade); - vr41xx_set_irq_trigger(CMBVR41XX_INTC_PIN, TRIGGER_LEVEL, SIGNAL_THROUGH); vr41xx_set_irq_level(CMBVR41XX_INTC_PIN, LEVEL_HIGH); vr41xx_cascade_irq(CMBVR41XX_INTC_IRQ, i8259_get_irq_number); -- cgit v1.2.3 From c44e8d5e47b8ba672440b92eab0735628469116c Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Sat, 30 Dec 2006 00:43:59 +0900 Subject: [MIPS] prom_free_prom_memory cleanup Current prom_free_prom_memory() implementations are almost same as free_init_pages(), or no-op. Make free_init_pages() extern (again) and make prom_free_prom_memory() use it. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/arc/memory.c | 18 ++++-------------- arch/mips/au1000/common/prom.c | 3 +-- arch/mips/cobalt/setup.c | 3 +-- arch/mips/ddb5xxx/common/prom.c | 3 +-- arch/mips/dec/prom/memory.c | 17 +++-------------- arch/mips/gt64120/ev64120/setup.c | 3 +-- arch/mips/gt64120/momenco_ocelot/prom.c | 3 +-- arch/mips/gt64120/wrppmc/setup.c | 3 +-- arch/mips/jmr3927/common/prom.c | 3 +-- arch/mips/lasat/prom.c | 3 +-- arch/mips/mips-boards/generic/memory.c | 18 ++++-------------- arch/mips/mips-boards/sim/sim_mem.c | 16 +++------------- arch/mips/mm/init.c | 12 ++---------- arch/mips/momentum/jaguar_atx/prom.c | 3 +-- arch/mips/momentum/ocelot_3/prom.c | 3 +-- arch/mips/momentum/ocelot_c/prom.c | 3 +-- arch/mips/momentum/ocelot_g/prom.c | 3 +-- arch/mips/philips/pnx8550/common/prom.c | 3 +-- arch/mips/pmc-sierra/yosemite/prom.c | 3 +-- arch/mips/qemu/q-mem.c | 3 +-- arch/mips/sgi-ip22/ip22-mc.c | 3 +-- arch/mips/sgi-ip27/ip27-memory.c | 3 +-- arch/mips/sgi-ip32/ip32-memory.c | 3 +-- arch/mips/sibyte/cfe/setup.c | 3 +-- arch/mips/sibyte/sb1250/prom.c | 3 +-- arch/mips/sni/sniprom.c | 3 +-- .../tx4927/toshiba_rbtx4927/toshiba_rbtx4927_prom.c | 3 +-- arch/mips/tx4938/toshiba_rbtx4938/prom.c | 3 +-- arch/mips/vr41xx/common/init.c | 3 +-- 29 files changed, 40 insertions(+), 113 deletions(-) (limited to 'arch') diff --git a/arch/mips/arc/memory.c b/arch/mips/arc/memory.c index 8a9ef58cc399..456cb81a32d9 100644 --- a/arch/mips/arc/memory.c +++ b/arch/mips/arc/memory.c @@ -141,30 +141,20 @@ void __init prom_meminit(void) } } -unsigned long __init prom_free_prom_memory(void) +void __init prom_free_prom_memory(void) { - unsigned long freed = 0; unsigned long addr; int i; if (prom_flags & PROM_FLAG_DONT_FREE_TEMP) - return 0; + return; for (i = 0; i < boot_mem_map.nr_map; i++) { if (boot_mem_map.map[i].type != BOOT_MEM_ROM_DATA) continue; addr = boot_mem_map.map[i].addr; - while (addr < boot_mem_map.map[i].addr - + boot_mem_map.map[i].size) { - ClearPageReserved(virt_to_page(__va(addr))); - init_page_count(virt_to_page(__va(addr))); - free_page((unsigned long)__va(addr)); - addr += PAGE_SIZE; - freed += PAGE_SIZE; - } + free_init_pages("prom memory", + addr, addr + boot_mem_map.map[i].size); } - printk(KERN_INFO "Freeing prom memory: %ldkb freed\n", freed >> 10); - - return freed; } diff --git a/arch/mips/au1000/common/prom.c b/arch/mips/au1000/common/prom.c index 6fce60af005d..a8637cdb5b4b 100644 --- a/arch/mips/au1000/common/prom.c +++ b/arch/mips/au1000/common/prom.c @@ -149,9 +149,8 @@ int get_ethernet_addr(char *ethernet_addr) return 0; } -unsigned long __init prom_free_prom_memory(void) +void __init prom_free_prom_memory(void) { - return 0; } EXPORT_SYMBOL(prom_getcmdline); diff --git a/arch/mips/cobalt/setup.c b/arch/mips/cobalt/setup.c index e8f0f20b852d..a4b69b543bd9 100644 --- a/arch/mips/cobalt/setup.c +++ b/arch/mips/cobalt/setup.c @@ -204,8 +204,7 @@ void __init prom_init(void) add_memory_region(0x0, memsz, BOOT_MEM_RAM); } -unsigned long __init prom_free_prom_memory(void) +void __init prom_free_prom_memory(void) { /* Nothing to do! */ - return 0; } diff --git a/arch/mips/ddb5xxx/common/prom.c b/arch/mips/ddb5xxx/common/prom.c index efef0f57ce1e..54a857b5e3ba 100644 --- a/arch/mips/ddb5xxx/common/prom.c +++ b/arch/mips/ddb5xxx/common/prom.c @@ -59,9 +59,8 @@ void __init prom_init(void) #endif } -unsigned long __init prom_free_prom_memory(void) +void __init prom_free_prom_memory(void) { - return 0; } #if defined(CONFIG_DDB5477) diff --git a/arch/mips/dec/prom/memory.c b/arch/mips/dec/prom/memory.c index 3aa01d268f2d..5a557e268f78 100644 --- a/arch/mips/dec/prom/memory.c +++ b/arch/mips/dec/prom/memory.c @@ -92,9 +92,9 @@ void __init prom_meminit(u32 magic) rex_setup_memory_region(); } -unsigned long __init prom_free_prom_memory(void) +void __init prom_free_prom_memory(void) { - unsigned long addr, end; + unsigned long end; /* * Free everything below the kernel itself but leave @@ -114,16 +114,5 @@ unsigned long __init prom_free_prom_memory(void) #endif end = __pa(&_text); - addr = PAGE_SIZE; - while (addr < end) { - ClearPageReserved(virt_to_page(__va(addr))); - init_page_count(virt_to_page(__va(addr))); - free_page((unsigned long)__va(addr)); - addr += PAGE_SIZE; - } - - printk("Freeing unused PROM memory: %ldkb freed\n", - (end - PAGE_SIZE) >> 10); - - return end - PAGE_SIZE; + free_init_pages("unused PROM memory", PAGE_SIZE, end); } diff --git a/arch/mips/gt64120/ev64120/setup.c b/arch/mips/gt64120/ev64120/setup.c index 99c8d42212e2..477848c22a2c 100644 --- a/arch/mips/gt64120/ev64120/setup.c +++ b/arch/mips/gt64120/ev64120/setup.c @@ -59,9 +59,8 @@ extern void galileo_machine_power_off(void); */ extern struct pci_ops galileo_pci_ops; -unsigned long __init prom_free_prom_memory(void) +void __init prom_free_prom_memory(void) { - return 0; } /* diff --git a/arch/mips/gt64120/momenco_ocelot/prom.c b/arch/mips/gt64120/momenco_ocelot/prom.c index 8677b6d3ada7..78f393b2afd9 100644 --- a/arch/mips/gt64120/momenco_ocelot/prom.c +++ b/arch/mips/gt64120/momenco_ocelot/prom.c @@ -67,7 +67,6 @@ void __init prom_init(void) add_memory_region(0, 64 << 20, BOOT_MEM_RAM); } -unsigned long __init prom_free_prom_memory(void) +void __init prom_free_prom_memory(void) { - return 0; } diff --git a/arch/mips/gt64120/wrppmc/setup.c b/arch/mips/gt64120/wrppmc/setup.c index 429afc400cb4..121188d5ec4a 100644 --- a/arch/mips/gt64120/wrppmc/setup.c +++ b/arch/mips/gt64120/wrppmc/setup.c @@ -93,9 +93,8 @@ void __init wrppmc_early_printk(const char *fmt, ...) } #endif /* WRPPMC_EARLY_DEBUG */ -unsigned long __init prom_free_prom_memory(void) +void __init prom_free_prom_memory(void) { - return 0; } #ifdef CONFIG_SERIAL_8250 diff --git a/arch/mips/jmr3927/common/prom.c b/arch/mips/jmr3927/common/prom.c index 5d5838f41d23..aa481b774c42 100644 --- a/arch/mips/jmr3927/common/prom.c +++ b/arch/mips/jmr3927/common/prom.c @@ -75,7 +75,6 @@ void __init prom_init_cmdline(void) *cp = '\0'; } -unsigned long __init prom_free_prom_memory(void) +void __init prom_free_prom_memory(void) { - return 0; } diff --git a/arch/mips/lasat/prom.c b/arch/mips/lasat/prom.c index 88c7ab871ec4..d47692f73a26 100644 --- a/arch/mips/lasat/prom.c +++ b/arch/mips/lasat/prom.c @@ -132,9 +132,8 @@ void __init prom_init(void) add_memory_region(0, lasat_board_info.li_memsize, BOOT_MEM_RAM); } -unsigned long __init prom_free_prom_memory(void) +void __init prom_free_prom_memory(void) { - return 0; } const char *get_system_type(void) diff --git a/arch/mips/mips-boards/generic/memory.c b/arch/mips/mips-boards/generic/memory.c index eeed944e0f83..ebf0e16c5a0d 100644 --- a/arch/mips/mips-boards/generic/memory.c +++ b/arch/mips/mips-boards/generic/memory.c @@ -166,9 +166,8 @@ void __init prom_meminit(void) } } -unsigned long __init prom_free_prom_memory(void) +void __init prom_free_prom_memory(void) { - unsigned long freed = 0; unsigned long addr; int i; @@ -176,17 +175,8 @@ unsigned long __init prom_free_prom_memory(void) if (boot_mem_map.map[i].type != BOOT_MEM_ROM_DATA) continue; - addr = PAGE_ALIGN(boot_mem_map.map[i].addr); - while (addr < boot_mem_map.map[i].addr - + boot_mem_map.map[i].size) { - ClearPageReserved(virt_to_page(__va(addr))); - init_page_count(virt_to_page(__va(addr))); - free_page((unsigned long)__va(addr)); - addr += PAGE_SIZE; - freed += PAGE_SIZE; - } + addr = boot_mem_map.map[i].addr; + free_init_pages("prom memory", + addr, addr + boot_mem_map.map[i].size); } - printk("Freeing prom memory: %ldkb freed\n", freed >> 10); - - return freed; } diff --git a/arch/mips/mips-boards/sim/sim_mem.c b/arch/mips/mips-boards/sim/sim_mem.c index f7ce76983328..46bc16f8b15d 100644 --- a/arch/mips/mips-boards/sim/sim_mem.c +++ b/arch/mips/mips-boards/sim/sim_mem.c @@ -99,10 +99,9 @@ void __init prom_meminit(void) } } -unsigned long __init prom_free_prom_memory(void) +void __init prom_free_prom_memory(void) { int i; - unsigned long freed = 0; unsigned long addr; for (i = 0; i < boot_mem_map.nr_map; i++) { @@ -110,16 +109,7 @@ unsigned long __init prom_free_prom_memory(void) continue; addr = boot_mem_map.map[i].addr; - while (addr < boot_mem_map.map[i].addr - + boot_mem_map.map[i].size) { - ClearPageReserved(virt_to_page(__va(addr))); - init_page_count(virt_to_page(__va(addr))); - free_page((unsigned long)__va(addr)); - addr += PAGE_SIZE; - freed += PAGE_SIZE; - } + free_init_pages("prom memory", + addr, addr + boot_mem_map.map[i].size); } - printk("Freeing prom memory: %ldkb freed\n", freed >> 10); - - return freed; } diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c index 49065c133ebf..fb427dbfe71e 100644 --- a/arch/mips/mm/init.c +++ b/arch/mips/mm/init.c @@ -467,7 +467,7 @@ void __init mem_init(void) } #endif /* !CONFIG_NEED_MULTIPLE_NODES */ -static void free_init_pages(char *what, unsigned long begin, unsigned long end) +void free_init_pages(const char *what, unsigned long begin, unsigned long end) { unsigned long pfn; @@ -493,17 +493,9 @@ void free_initrd_mem(unsigned long start, unsigned long end) } #endif -extern unsigned long prom_free_prom_memory(void); - void free_initmem(void) { - unsigned long freed; - - freed = prom_free_prom_memory(); - if (freed) - printk(KERN_INFO "Freeing firmware memory: %ldkb freed\n", - freed >> 10); - + prom_free_prom_memory(); free_init_pages("unused kernel memory", __pa_symbol(&__init_begin), __pa_symbol(&__init_end)); diff --git a/arch/mips/momentum/jaguar_atx/prom.c b/arch/mips/momentum/jaguar_atx/prom.c index 3d2712929293..66371ffa2196 100644 --- a/arch/mips/momentum/jaguar_atx/prom.c +++ b/arch/mips/momentum/jaguar_atx/prom.c @@ -235,9 +235,8 @@ void __init prom_init(void) #endif } -unsigned long __init prom_free_prom_memory(void) +void __init prom_free_prom_memory(void) { - return 0; } void __init prom_fixup_mem_map(unsigned long start, unsigned long end) diff --git a/arch/mips/momentum/ocelot_3/prom.c b/arch/mips/momentum/ocelot_3/prom.c index 6ce9b7fdb824..8e02df63578a 100644 --- a/arch/mips/momentum/ocelot_3/prom.c +++ b/arch/mips/momentum/ocelot_3/prom.c @@ -180,9 +180,8 @@ void __init prom_init(void) #endif } -unsigned long __init prom_free_prom_memory(void) +void __init prom_free_prom_memory(void) { - return 0; } void __init prom_fixup_mem_map(unsigned long start, unsigned long end) diff --git a/arch/mips/momentum/ocelot_c/prom.c b/arch/mips/momentum/ocelot_c/prom.c index d0b77e101d74..b689ceea8cfb 100644 --- a/arch/mips/momentum/ocelot_c/prom.c +++ b/arch/mips/momentum/ocelot_c/prom.c @@ -178,7 +178,6 @@ void __init prom_init(void) #endif } -unsigned long __init prom_free_prom_memory(void) +void __init prom_free_prom_memory(void) { - return 0; } diff --git a/arch/mips/momentum/ocelot_g/prom.c b/arch/mips/momentum/ocelot_g/prom.c index 2f75c6b91ec5..836d0830720d 100644 --- a/arch/mips/momentum/ocelot_g/prom.c +++ b/arch/mips/momentum/ocelot_g/prom.c @@ -79,7 +79,6 @@ void __init prom_init(void) } } -unsigned long __init prom_free_prom_memory(void) +void __init prom_free_prom_memory(void) { - return 0; } diff --git a/arch/mips/philips/pnx8550/common/prom.c b/arch/mips/philips/pnx8550/common/prom.c index eb6ec11fef07..8aeed6c2b8c3 100644 --- a/arch/mips/philips/pnx8550/common/prom.c +++ b/arch/mips/philips/pnx8550/common/prom.c @@ -106,9 +106,8 @@ int get_ethernet_addr(char *ethernet_addr) return 0; } -unsigned long __init prom_free_prom_memory(void) +void __init prom_free_prom_memory(void) { - return 0; } extern int pnx8550_console_port; diff --git a/arch/mips/pmc-sierra/yosemite/prom.c b/arch/mips/pmc-sierra/yosemite/prom.c index 9fe4973377c3..1e1685e415a4 100644 --- a/arch/mips/pmc-sierra/yosemite/prom.c +++ b/arch/mips/pmc-sierra/yosemite/prom.c @@ -132,9 +132,8 @@ void __init prom_init(void) prom_grab_secondary(); } -unsigned long __init prom_free_prom_memory(void) +void __init prom_free_prom_memory(void) { - return 0; } void __init prom_fixup_mem_map(unsigned long start, unsigned long end) diff --git a/arch/mips/qemu/q-mem.c b/arch/mips/qemu/q-mem.c index d174fac43031..dae39b59de15 100644 --- a/arch/mips/qemu/q-mem.c +++ b/arch/mips/qemu/q-mem.c @@ -1,6 +1,5 @@ #include -unsigned long __init prom_free_prom_memory(void) +void __init prom_free_prom_memory(void) { - return 0UL; } diff --git a/arch/mips/sgi-ip22/ip22-mc.c b/arch/mips/sgi-ip22/ip22-mc.c index b58bd522262b..ddb6506d8341 100644 --- a/arch/mips/sgi-ip22/ip22-mc.c +++ b/arch/mips/sgi-ip22/ip22-mc.c @@ -202,7 +202,6 @@ void __init sgimc_init(void) } void __init prom_meminit(void) {} -unsigned long __init prom_free_prom_memory(void) +void __init prom_free_prom_memory(void) { - return 0; } diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c index 16e5682b01f1..0e3d535e9f43 100644 --- a/arch/mips/sgi-ip27/ip27-memory.c +++ b/arch/mips/sgi-ip27/ip27-memory.c @@ -498,10 +498,9 @@ void __init prom_meminit(void) } } -unsigned long __init prom_free_prom_memory(void) +void __init prom_free_prom_memory(void) { /* We got nothing to free here ... */ - return 0; } extern void pagetable_init(void); diff --git a/arch/mips/sgi-ip32/ip32-memory.c b/arch/mips/sgi-ip32/ip32-memory.c index d37d40a3cdae..849d392a0013 100644 --- a/arch/mips/sgi-ip32/ip32-memory.c +++ b/arch/mips/sgi-ip32/ip32-memory.c @@ -43,7 +43,6 @@ void __init prom_meminit (void) } -unsigned long __init prom_free_prom_memory (void) +void __init prom_free_prom_memory(void) { - return 0; } diff --git a/arch/mips/sibyte/cfe/setup.c b/arch/mips/sibyte/cfe/setup.c index 6e8952da6e2a..9e6099e69622 100644 --- a/arch/mips/sibyte/cfe/setup.c +++ b/arch/mips/sibyte/cfe/setup.c @@ -343,10 +343,9 @@ void __init prom_init(void) prom_meminit(); } -unsigned long __init prom_free_prom_memory(void) +void __init prom_free_prom_memory(void) { /* Not sure what I'm supposed to do here. Nothing, I think */ - return 0; } void prom_putchar(char c) diff --git a/arch/mips/sibyte/sb1250/prom.c b/arch/mips/sibyte/sb1250/prom.c index 3c33a4517bc3..257c4e674353 100644 --- a/arch/mips/sibyte/sb1250/prom.c +++ b/arch/mips/sibyte/sb1250/prom.c @@ -87,10 +87,9 @@ void __init prom_init(void) prom_meminit(); } -unsigned long __init prom_free_prom_memory(void) +void __init prom_free_prom_memory(void) { /* Not sure what I'm supposed to do here. Nothing, I think */ - return 0; } void prom_putchar(char c) diff --git a/arch/mips/sni/sniprom.c b/arch/mips/sni/sniprom.c index d1d0f1f493b4..1213d166f22e 100644 --- a/arch/mips/sni/sniprom.c +++ b/arch/mips/sni/sniprom.c @@ -67,9 +67,8 @@ void prom_printf(char *fmt, ...) va_end(args); } -unsigned long prom_free_prom_memory(void) +void __init prom_free_prom_memory(void) { - return 0; } /* diff --git a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_prom.c b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_prom.c index efe50562f0ce..9a3a5babd1fb 100644 --- a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_prom.c +++ b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_prom.c @@ -80,9 +80,8 @@ void __init prom_init(void) add_memory_region(0, msize << 20, BOOT_MEM_RAM); } -unsigned long __init prom_free_prom_memory(void) +void __init prom_free_prom_memory(void) { - return 0; } const char *get_system_type(void) diff --git a/arch/mips/tx4938/toshiba_rbtx4938/prom.c b/arch/mips/tx4938/toshiba_rbtx4938/prom.c index e44daf30a7c1..7dc6a0aae21c 100644 --- a/arch/mips/tx4938/toshiba_rbtx4938/prom.c +++ b/arch/mips/tx4938/toshiba_rbtx4938/prom.c @@ -56,9 +56,8 @@ void __init prom_init(void) return; } -unsigned long __init prom_free_prom_memory(void) +void __init prom_free_prom_memory(void) { - return 0; } void __init prom_fixup_mem_map(unsigned long start, unsigned long end) diff --git a/arch/mips/vr41xx/common/init.c b/arch/mips/vr41xx/common/init.c index a2e285c1d4d5..4f97e0ba9e24 100644 --- a/arch/mips/vr41xx/common/init.c +++ b/arch/mips/vr41xx/common/init.c @@ -81,7 +81,6 @@ void __init prom_init(void) } } -unsigned long __init prom_free_prom_memory (void) +void __init prom_free_prom_memory(void) { - return 0UL; } -- cgit v1.2.3 From a583158c9ce822c96a718fbf877cec1e5f9ad75d Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Mon, 18 Dec 2006 00:07:40 +0900 Subject: [MIPS] Unify memset.S The 32-bit version and 64-bit version are almost equal. Unify them. This makes further improvements (for example, supporting CDEX, etc.) easier. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/lib-32/Makefile | 2 +- arch/mips/lib-32/memset.S | 145 ---------------------------------------- arch/mips/lib-64/Makefile | 2 +- arch/mips/lib-64/memset.S | 142 --------------------------------------- arch/mips/lib/Makefile | 2 +- arch/mips/lib/memset.S | 166 ++++++++++++++++++++++++++++++++++++++++++++++ 6 files changed, 169 insertions(+), 290 deletions(-) delete mode 100644 arch/mips/lib-32/memset.S delete mode 100644 arch/mips/lib-64/memset.S create mode 100644 arch/mips/lib/memset.S (limited to 'arch') diff --git a/arch/mips/lib-32/Makefile b/arch/mips/lib-32/Makefile index dcd4d2ed2ac4..2036cf5e6857 100644 --- a/arch/mips/lib-32/Makefile +++ b/arch/mips/lib-32/Makefile @@ -2,7 +2,7 @@ # Makefile for MIPS-specific library files.. # -lib-y += memset.o watch.o +lib-y += watch.o obj-$(CONFIG_CPU_MIPS32) += dump_tlb.o obj-$(CONFIG_CPU_MIPS64) += dump_tlb.o diff --git a/arch/mips/lib-32/memset.S b/arch/mips/lib-32/memset.S deleted file mode 100644 index 1981485bd48b..000000000000 --- a/arch/mips/lib-32/memset.S +++ /dev/null @@ -1,145 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1998, 1999, 2000 by Ralf Baechle - * Copyright (C) 1999, 2000 Silicon Graphics, Inc. - */ -#include -#include -#include - -#define EX(insn,reg,addr,handler) \ -9: insn reg, addr; \ - .section __ex_table,"a"; \ - PTR 9b, handler; \ - .previous - - .macro f_fill64 dst, offset, val, fixup - EX(LONG_S, \val, (\offset + 0 * LONGSIZE)(\dst), \fixup) - EX(LONG_S, \val, (\offset + 1 * LONGSIZE)(\dst), \fixup) - EX(LONG_S, \val, (\offset + 2 * LONGSIZE)(\dst), \fixup) - EX(LONG_S, \val, (\offset + 3 * LONGSIZE)(\dst), \fixup) - EX(LONG_S, \val, (\offset + 4 * LONGSIZE)(\dst), \fixup) - EX(LONG_S, \val, (\offset + 5 * LONGSIZE)(\dst), \fixup) - EX(LONG_S, \val, (\offset + 6 * LONGSIZE)(\dst), \fixup) - EX(LONG_S, \val, (\offset + 7 * LONGSIZE)(\dst), \fixup) - EX(LONG_S, \val, (\offset + 8 * LONGSIZE)(\dst), \fixup) - EX(LONG_S, \val, (\offset + 9 * LONGSIZE)(\dst), \fixup) - EX(LONG_S, \val, (\offset + 10 * LONGSIZE)(\dst), \fixup) - EX(LONG_S, \val, (\offset + 11 * LONGSIZE)(\dst), \fixup) - EX(LONG_S, \val, (\offset + 12 * LONGSIZE)(\dst), \fixup) - EX(LONG_S, \val, (\offset + 13 * LONGSIZE)(\dst), \fixup) - EX(LONG_S, \val, (\offset + 14 * LONGSIZE)(\dst), \fixup) - EX(LONG_S, \val, (\offset + 15 * LONGSIZE)(\dst), \fixup) - .endm - -/* - * memset(void *s, int c, size_t n) - * - * a0: start of area to clear - * a1: char to fill with - * a2: size of area to clear - */ - .set noreorder - .align 5 -LEAF(memset) - beqz a1, 1f - move v0, a0 /* result */ - - andi a1, 0xff /* spread fillword */ - sll t1, a1, 8 - or a1, t1 - sll t1, a1, 16 - or a1, t1 -1: - -FEXPORT(__bzero) - sltiu t0, a2, LONGSIZE /* very small region? */ - bnez t0, small_memset - andi t0, a0, LONGMASK /* aligned? */ - - beqz t0, 1f - PTR_SUBU t0, LONGSIZE /* alignment in bytes */ - -#ifdef __MIPSEB__ - EX(swl, a1, (a0), first_fixup) /* make word aligned */ -#endif -#ifdef __MIPSEL__ - EX(swr, a1, (a0), first_fixup) /* make word aligned */ -#endif - PTR_SUBU a0, t0 /* long align ptr */ - PTR_ADDU a2, t0 /* correct size */ - -1: ori t1, a2, 0x3f /* # of full blocks */ - xori t1, 0x3f - beqz t1, memset_partial /* no block to fill */ - andi t0, a2, 0x3c - - PTR_ADDU t1, a0 /* end address */ - .set reorder -1: PTR_ADDIU a0, 64 - f_fill64 a0, -64, a1, fwd_fixup - bne t1, a0, 1b - .set noreorder - -memset_partial: - PTR_LA t1, 2f /* where to start */ - PTR_SUBU t1, t0 - jr t1 - PTR_ADDU a0, t0 /* dest ptr */ - - .set push - .set noreorder - .set nomacro - f_fill64 a0, -64, a1, partial_fixup /* ... but first do longs ... */ -2: .set pop - andi a2, LONGMASK /* At most one long to go */ - - beqz a2, 1f - PTR_ADDU a0, a2 /* What's left */ -#ifdef __MIPSEB__ - EX(swr, a1, -1(a0), last_fixup) -#endif -#ifdef __MIPSEL__ - EX(swl, a1, -1(a0), last_fixup) -#endif -1: jr ra - move a2, zero - -small_memset: - beqz a2, 2f - PTR_ADDU t1, a0, a2 - -1: PTR_ADDIU a0, 1 /* fill bytewise */ - bne t1, a0, 1b - sb a1, -1(a0) - -2: jr ra /* done */ - move a2, zero - END(memset) - -first_fixup: - jr ra - nop - -fwd_fixup: - PTR_L t0, TI_TASK($28) - LONG_L t0, THREAD_BUADDR(t0) - andi a2, 0x3f - LONG_ADDU a2, t1 - jr ra - LONG_SUBU a2, t0 - -partial_fixup: - PTR_L t0, TI_TASK($28) - LONG_L t0, THREAD_BUADDR(t0) - andi a2, LONGMASK - LONG_ADDU a2, t1 - jr ra - LONG_SUBU a2, t0 - -last_fixup: - jr ra - andi v1, a2, LONGMASK diff --git a/arch/mips/lib-64/Makefile b/arch/mips/lib-64/Makefile index dcd4d2ed2ac4..2036cf5e6857 100644 --- a/arch/mips/lib-64/Makefile +++ b/arch/mips/lib-64/Makefile @@ -2,7 +2,7 @@ # Makefile for MIPS-specific library files.. # -lib-y += memset.o watch.o +lib-y += watch.o obj-$(CONFIG_CPU_MIPS32) += dump_tlb.o obj-$(CONFIG_CPU_MIPS64) += dump_tlb.o diff --git a/arch/mips/lib-64/memset.S b/arch/mips/lib-64/memset.S deleted file mode 100644 index e2c42c85113b..000000000000 --- a/arch/mips/lib-64/memset.S +++ /dev/null @@ -1,142 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1998, 1999, 2000 by Ralf Baechle - * Copyright (C) 1999, 2000 Silicon Graphics, Inc. - */ -#include -#include -#include - -#define EX(insn,reg,addr,handler) \ -9: insn reg, addr; \ - .section __ex_table,"a"; \ - PTR 9b, handler; \ - .previous - - .macro f_fill64 dst, offset, val, fixup - EX(LONG_S, \val, (\offset + 0 * LONGSIZE)(\dst), \fixup) - EX(LONG_S, \val, (\offset + 1 * LONGSIZE)(\dst), \fixup) - EX(LONG_S, \val, (\offset + 2 * LONGSIZE)(\dst), \fixup) - EX(LONG_S, \val, (\offset + 3 * LONGSIZE)(\dst), \fixup) - EX(LONG_S, \val, (\offset + 4 * LONGSIZE)(\dst), \fixup) - EX(LONG_S, \val, (\offset + 5 * LONGSIZE)(\dst), \fixup) - EX(LONG_S, \val, (\offset + 6 * LONGSIZE)(\dst), \fixup) - EX(LONG_S, \val, (\offset + 7 * LONGSIZE)(\dst), \fixup) - .endm - -/* - * memset(void *s, int c, size_t n) - * - * a0: start of area to clear - * a1: char to fill with - * a2: size of area to clear - */ - .set noreorder - .align 5 -LEAF(memset) - beqz a1, 1f - move v0, a0 /* result */ - - andi a1, 0xff /* spread fillword */ - dsll t1, a1, 8 - or a1, t1 - dsll t1, a1, 16 - or a1, t1 - dsll t1, a1, 32 - or a1, t1 -1: - -FEXPORT(__bzero) - sltiu t0, a2, LONGSIZE /* very small region? */ - bnez t0, small_memset - andi t0, a0, LONGMASK /* aligned? */ - - beqz t0, 1f - PTR_SUBU t0, LONGSIZE /* alignment in bytes */ - -#ifdef __MIPSEB__ - EX(sdl, a1, (a0), first_fixup) /* make dword aligned */ -#endif -#ifdef __MIPSEL__ - EX(sdr, a1, (a0), first_fixup) /* make dword aligned */ -#endif - PTR_SUBU a0, t0 /* long align ptr */ - PTR_ADDU a2, t0 /* correct size */ - -1: ori t1, a2, 0x3f /* # of full blocks */ - xori t1, 0x3f - beqz t1, memset_partial /* no block to fill */ - andi t0, a2, 0x38 - - PTR_ADDU t1, a0 /* end address */ - .set reorder -1: PTR_ADDIU a0, 64 - f_fill64 a0, -64, a1, fwd_fixup - bne t1, a0, 1b - .set noreorder - -memset_partial: - PTR_LA t1, 2f /* where to start */ - .set noat - dsrl AT, t0, 1 - PTR_SUBU t1, AT - .set noat - jr t1 - PTR_ADDU a0, t0 /* dest ptr */ - - .set push - .set noreorder - .set nomacro - f_fill64 a0, -64, a1, partial_fixup /* ... but first do longs ... */ -2: .set pop - andi a2, LONGMASK /* At most one long to go */ - - beqz a2, 1f - PTR_ADDU a0, a2 /* What's left */ -#ifdef __MIPSEB__ - EX(sdr, a1, -1(a0), last_fixup) -#endif -#ifdef __MIPSEL__ - EX(sdl, a1, -1(a0), last_fixup) -#endif -1: jr ra - move a2, zero - -small_memset: - beqz a2, 2f - PTR_ADDU t1, a0, a2 - -1: PTR_ADDIU a0, 1 /* fill bytewise */ - bne t1, a0, 1b - sb a1, -1(a0) - -2: jr ra /* done */ - move a2, zero - END(memset) - -first_fixup: - jr ra - nop - -fwd_fixup: - PTR_L t0, TI_TASK($28) - LONG_L t0, THREAD_BUADDR(t0) - andi a2, 0x3f - LONG_ADDU a2, t1 - jr ra - LONG_SUBU a2, t0 - -partial_fixup: - PTR_L t0, TI_TASK($28) - LONG_L t0, THREAD_BUADDR(t0) - andi a2, LONGMASK - LONG_ADDU a2, t1 - jr ra - LONG_SUBU a2, t0 - -last_fixup: - jr ra - andi v1, a2, LONGMASK diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile index 989c900b8b14..5ad501b30b43 100644 --- a/arch/mips/lib/Makefile +++ b/arch/mips/lib/Makefile @@ -2,7 +2,7 @@ # Makefile for MIPS-specific library files.. # -lib-y += csum_partial.o memcpy.o promlib.o \ +lib-y += csum_partial.o memcpy.o memset.o promlib.o \ strlen_user.o strncpy_user.o strnlen_user.o uncached.o obj-y += iomap.o diff --git a/arch/mips/lib/memset.S b/arch/mips/lib/memset.S new file mode 100644 index 000000000000..3f8b8b3d0b23 --- /dev/null +++ b/arch/mips/lib/memset.S @@ -0,0 +1,166 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1998, 1999, 2000 by Ralf Baechle + * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + */ +#include +#include +#include + +#if LONGSIZE == 4 +#define LONG_S_L swl +#define LONG_S_R swr +#else +#define LONG_S_L sdl +#define LONG_S_R sdr +#endif + +#define EX(insn,reg,addr,handler) \ +9: insn reg, addr; \ + .section __ex_table,"a"; \ + PTR 9b, handler; \ + .previous + + .macro f_fill64 dst, offset, val, fixup + EX(LONG_S, \val, (\offset + 0 * LONGSIZE)(\dst), \fixup) + EX(LONG_S, \val, (\offset + 1 * LONGSIZE)(\dst), \fixup) + EX(LONG_S, \val, (\offset + 2 * LONGSIZE)(\dst), \fixup) + EX(LONG_S, \val, (\offset + 3 * LONGSIZE)(\dst), \fixup) + EX(LONG_S, \val, (\offset + 4 * LONGSIZE)(\dst), \fixup) + EX(LONG_S, \val, (\offset + 5 * LONGSIZE)(\dst), \fixup) + EX(LONG_S, \val, (\offset + 6 * LONGSIZE)(\dst), \fixup) + EX(LONG_S, \val, (\offset + 7 * LONGSIZE)(\dst), \fixup) +#if LONGSIZE == 4 + EX(LONG_S, \val, (\offset + 8 * LONGSIZE)(\dst), \fixup) + EX(LONG_S, \val, (\offset + 9 * LONGSIZE)(\dst), \fixup) + EX(LONG_S, \val, (\offset + 10 * LONGSIZE)(\dst), \fixup) + EX(LONG_S, \val, (\offset + 11 * LONGSIZE)(\dst), \fixup) + EX(LONG_S, \val, (\offset + 12 * LONGSIZE)(\dst), \fixup) + EX(LONG_S, \val, (\offset + 13 * LONGSIZE)(\dst), \fixup) + EX(LONG_S, \val, (\offset + 14 * LONGSIZE)(\dst), \fixup) + EX(LONG_S, \val, (\offset + 15 * LONGSIZE)(\dst), \fixup) +#endif + .endm + +/* + * memset(void *s, int c, size_t n) + * + * a0: start of area to clear + * a1: char to fill with + * a2: size of area to clear + */ + .set noreorder + .align 5 +LEAF(memset) + beqz a1, 1f + move v0, a0 /* result */ + + andi a1, 0xff /* spread fillword */ + LONG_SLL t1, a1, 8 + or a1, t1 + LONG_SLL t1, a1, 16 +#if LONGSIZE == 8 + or a1, t1 + LONG_SLL t1, a1, 32 +#endif + or a1, t1 +1: + +FEXPORT(__bzero) + sltiu t0, a2, LONGSIZE /* very small region? */ + bnez t0, small_memset + andi t0, a0, LONGMASK /* aligned? */ + + beqz t0, 1f + PTR_SUBU t0, LONGSIZE /* alignment in bytes */ + +#ifdef __MIPSEB__ + EX(LONG_S_L, a1, (a0), first_fixup) /* make word/dword aligned */ +#endif +#ifdef __MIPSEL__ + EX(LONG_S_R, a1, (a0), first_fixup) /* make word/dword aligned */ +#endif + PTR_SUBU a0, t0 /* long align ptr */ + PTR_ADDU a2, t0 /* correct size */ + +1: ori t1, a2, 0x3f /* # of full blocks */ + xori t1, 0x3f + beqz t1, memset_partial /* no block to fill */ + andi t0, a2, 0x40-LONGSIZE + + PTR_ADDU t1, a0 /* end address */ + .set reorder +1: PTR_ADDIU a0, 64 + f_fill64 a0, -64, a1, fwd_fixup + bne t1, a0, 1b + .set noreorder + +memset_partial: + PTR_LA t1, 2f /* where to start */ +#if LONGSIZE == 4 + PTR_SUBU t1, t0 +#else + .set noat + LONG_SRL AT, t0, 1 + PTR_SUBU t1, AT + .set noat +#endif + jr t1 + PTR_ADDU a0, t0 /* dest ptr */ + + .set push + .set noreorder + .set nomacro + f_fill64 a0, -64, a1, partial_fixup /* ... but first do longs ... */ +2: .set pop + andi a2, LONGMASK /* At most one long to go */ + + beqz a2, 1f + PTR_ADDU a0, a2 /* What's left */ +#ifdef __MIPSEB__ + EX(LONG_S_R, a1, -1(a0), last_fixup) +#endif +#ifdef __MIPSEL__ + EX(LONG_S_L, a1, -1(a0), last_fixup) +#endif +1: jr ra + move a2, zero + +small_memset: + beqz a2, 2f + PTR_ADDU t1, a0, a2 + +1: PTR_ADDIU a0, 1 /* fill bytewise */ + bne t1, a0, 1b + sb a1, -1(a0) + +2: jr ra /* done */ + move a2, zero + END(memset) + +first_fixup: + jr ra + nop + +fwd_fixup: + PTR_L t0, TI_TASK($28) + LONG_L t0, THREAD_BUADDR(t0) + andi a2, 0x3f + LONG_ADDU a2, t1 + jr ra + LONG_SUBU a2, t0 + +partial_fixup: + PTR_L t0, TI_TASK($28) + LONG_L t0, THREAD_BUADDR(t0) + andi a2, LONGMASK + LONG_ADDU a2, t1 + jr ra + LONG_SUBU a2, t0 + +last_fixup: + jr ra + andi v1, a2, LONGMASK -- cgit v1.2.3 From db84dc61552ae0d198a8133d28b80c3838930ba8 Mon Sep 17 00:00:00 2001 From: Franck Bui-Huu Date: Wed, 10 Jan 2007 09:44:04 +0100 Subject: [MIPS] Setup min_low_pfn/max_low_pfn correctly This patch makes a better usage of these two globals. 'min_low_pfn' is now correctly setup for all configs, which allow us to rely on it in boot memory code init. Signed-off-by: Franck Bui-Huu Signed-off-by: Ralf Baechle --- arch/mips/kernel/setup.c | 36 +++++++++++++++++++++++++++--------- arch/mips/mm/init.c | 23 +++++++++++------------ 2 files changed, 38 insertions(+), 21 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index 89440a0d8528..f352cd9c834b 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -271,8 +271,7 @@ static void __init bootmem_init(void) static void __init bootmem_init(void) { unsigned long reserved_end; - unsigned long highest = 0; - unsigned long mapstart = -1UL; + unsigned long mapstart = ~0UL; unsigned long bootmap_size; int i; @@ -283,6 +282,13 @@ static void __init bootmem_init(void) */ reserved_end = max(init_initrd(), PFN_UP(__pa_symbol(&_end))); + /* + * max_low_pfn is not a number of pages. The number of pages + * of the system is given by 'max_low_pfn - min_low_pfn'. + */ + min_low_pfn = ~0UL; + max_low_pfn = 0; + /* * Find the highest page frame number we have available. */ @@ -296,8 +302,10 @@ static void __init bootmem_init(void) end = PFN_DOWN(boot_mem_map.map[i].addr + boot_mem_map.map[i].size); - if (end > highest) - highest = end; + if (end > max_low_pfn) + max_low_pfn = end; + if (start < min_low_pfn) + min_low_pfn = start; if (end <= reserved_end) continue; if (start >= mapstart) @@ -305,22 +313,32 @@ static void __init bootmem_init(void) mapstart = max(reserved_end, start); } + if (min_low_pfn >= max_low_pfn) + panic("Incorrect memory mapping !!!"); + if (min_low_pfn > 0) { + printk(KERN_INFO + "Wasting %lu bytes for tracking %lu unused pages\n", + min_low_pfn * sizeof(struct page), + min_low_pfn); + min_low_pfn = 0; + } + /* * Determine low and high memory ranges */ - if (highest > PFN_DOWN(HIGHMEM_START)) { + if (max_low_pfn > PFN_DOWN(HIGHMEM_START)) { #ifdef CONFIG_HIGHMEM highstart_pfn = PFN_DOWN(HIGHMEM_START); - highend_pfn = highest; + highend_pfn = max_low_pfn; #endif - highest = PFN_DOWN(HIGHMEM_START); + max_low_pfn = PFN_DOWN(HIGHMEM_START); } /* * Initialize the boot-time allocator with low memory only. */ - bootmap_size = init_bootmem(mapstart, highest); - + bootmap_size = init_bootmem_node(NODE_DATA(0), mapstart, + min_low_pfn, max_low_pfn); /* * Register fully available low RAM pages with the bootmem allocator. */ diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c index fb427dbfe71e..5257f7b42fd2 100644 --- a/arch/mips/mm/init.c +++ b/arch/mips/mm/init.c @@ -341,7 +341,6 @@ static int __init page_is_ram(unsigned long pagenr) void __init paging_init(void) { unsigned long zones_size[MAX_NR_ZONES] = { 0, }; - unsigned long max_dma, low; #ifndef CONFIG_FLATMEM unsigned long zholes_size[MAX_NR_ZONES] = { 0, }; unsigned long i, j, pfn; @@ -354,19 +353,19 @@ void __init paging_init(void) #endif kmap_coherent_init(); - max_dma = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT; - low = max_low_pfn; - #ifdef CONFIG_ISA - if (low < max_dma) - zones_size[ZONE_DMA] = low; - else { - zones_size[ZONE_DMA] = max_dma; - zones_size[ZONE_NORMAL] = low - max_dma; - } -#else - zones_size[ZONE_DMA] = low; + if (max_low_pfn >= MAX_DMA_PFN) + if (min_low_pfn >= MAX_DMA_PFN) { + zones_size[ZONE_DMA] = 0; + zones_size[ZONE_NORMAL] = max_low_pfn - min_low_pfn; + } else { + zones_size[ZONE_DMA] = MAX_DMA_PFN - min_low_pfn; + zones_size[ZONE_NORMAL] = max_low_pfn - MAX_DMA_PFN; + } + else #endif + zones_size[ZONE_DMA] = max_low_pfn - min_low_pfn; + #ifdef CONFIG_HIGHMEM zones_size[ZONE_HIGHMEM] = highend_pfn - highstart_pfn; -- cgit v1.2.3 From 6f284a2ce7b8bc49cb8455b1763357897a899abb Mon Sep 17 00:00:00 2001 From: Franck Bui-Huu Date: Wed, 10 Jan 2007 09:44:05 +0100 Subject: [MIPS] FLATMEM: introduce PHYS_OFFSET. The old code was assuming that min_low_pfn was always 0. This means that platforms having a big hole at their memory start paid the price of wasting some memory for the allocation of unused entries in mem_map[]. This patch prevents this waste. It introduces PHYS_OFFSET define which is the start of the physical memory and uses it wherever needed. Specially when converting physical/virtual addresses into virtual/physical ones. Currently all platforms defines PHYS_OFFSET to 0. Signed-off-by: Franck Bui-Huu Signed-off-by: Ralf Baechle --- arch/mips/kernel/setup.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index f352cd9c834b..e1d76b87601c 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -315,13 +315,17 @@ static void __init bootmem_init(void) if (min_low_pfn >= max_low_pfn) panic("Incorrect memory mapping !!!"); - if (min_low_pfn > 0) { + if (min_low_pfn > ARCH_PFN_OFFSET) { printk(KERN_INFO "Wasting %lu bytes for tracking %lu unused pages\n", - min_low_pfn * sizeof(struct page), - min_low_pfn); - min_low_pfn = 0; + (min_low_pfn - ARCH_PFN_OFFSET) * sizeof(struct page), + min_low_pfn - ARCH_PFN_OFFSET); + } else if (min_low_pfn < ARCH_PFN_OFFSET) { + printk(KERN_INFO + "%lu free pages won't be used\n", + ARCH_PFN_OFFSET - min_low_pfn); } + min_low_pfn = ARCH_PFN_OFFSET; /* * Determine low and high memory ranges -- cgit v1.2.3 From 9a0ad9e9d8cae1087fe7b0b137e1c84d12dc0c76 Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Thu, 11 Jan 2007 23:53:18 +0900 Subject: [MIPS] vr41xx: add MACINT controls This patch has added MACINT controls. They are necessary for VR4133 ethernet driver. Signed-off-by: Yoichi Yuasa Signed-off-by: Ralf Baechle --- arch/mips/vr41xx/common/icu.c | 27 ++++++++++++++++++++++++++- 1 file changed, 26 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/vr41xx/common/icu.c b/arch/mips/vr41xx/common/icu.c index c075261976c5..34622f3f5ff4 100644 --- a/arch/mips/vr41xx/common/icu.c +++ b/arch/mips/vr41xx/common/icu.c @@ -3,7 +3,7 @@ * * Copyright (C) 2001-2002 MontaVista Software Inc. * Author: Yoichi Yuasa - * Copyright (C) 2003-2005 Yoichi Yuasa + * Copyright (C) 2003-2006 Yoichi Yuasa * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -68,6 +68,7 @@ static unsigned char sysint2_assign[16] = { #define MPIUINTREG 0x0e #define MAIUINTREG 0x10 #define MKIUINTREG 0x12 +#define MMACINTREG 0x12 #define MGIUINTLREG 0x14 #define MDSIUINTREG 0x16 #define NMIREG 0x18 @@ -241,6 +242,30 @@ void vr41xx_disable_kiuint(uint16_t mask) EXPORT_SYMBOL(vr41xx_disable_kiuint); +void vr41xx_enable_macint(uint16_t mask) +{ + struct irq_desc *desc = irq_desc + ETHERNET_IRQ; + unsigned long flags; + + spin_lock_irqsave(&desc->lock, flags); + icu1_set(MMACINTREG, mask); + spin_unlock_irqrestore(&desc->lock, flags); +} + +EXPORT_SYMBOL(vr41xx_enable_macint); + +void vr41xx_disable_macint(uint16_t mask) +{ + struct irq_desc *desc = irq_desc + ETHERNET_IRQ; + unsigned long flags; + + spin_lock_irqsave(&desc->lock, flags); + icu1_clear(MMACINTREG, mask); + spin_unlock_irqrestore(&desc->lock, flags); +} + +EXPORT_SYMBOL(vr41xx_disable_macint); + void vr41xx_enable_dsiuint(uint16_t mask) { struct irq_desc *desc = irq_desc + DSIU_IRQ; -- cgit v1.2.3 From ea6e942bea55b574bf2118bce8ee73185e754cfb Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Tue, 16 Jan 2007 23:29:11 +0900 Subject: [MIPS] Kconfig: Move some entries to appropriate menu Currently KEXEC is in "Machine selection", SECCOMP, PM, APM are in "Executable file formats" menu. Move KEXEC and SECCOMP to "Kernel type" and PM, APM to new "Power management options" menu. Also replace "config PM" with kernel/power/Kconfig. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 68 +++++++++++++++++++++++++++---------------------------- 1 file changed, 34 insertions(+), 34 deletions(-) (limited to 'arch') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index bbd386f572d9..21db07efd7a0 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -790,23 +790,6 @@ config TOSHIBA_RBTX4938 endchoice -config KEXEC - bool "Kexec system call (EXPERIMENTAL)" - depends on EXPERIMENTAL - help - kexec is a system call that implements the ability to shutdown your - current kernel, and to start another kernel. It is like a reboot - but it is indepedent of the system firmware. And like a reboot - you can start any kernel with it, not just Linux. - - The name comes from the similiarity to the exec system call. - - It is an ongoing process to be certain the hardware in a machine - is properly shutdown, so do not be surprised if this code does not - initially work for you. It may help to enable device hotplugging - support. As of this writing the exact hardware interface is - strongly in flux, so no good recommendation can be made. - source "arch/mips/ddb5xxx/Kconfig" source "arch/mips/gt64120/ev64120/Kconfig" source "arch/mips/jazz/Kconfig" @@ -1859,6 +1842,40 @@ config MIPS_INSANE_LARGE This will result in additional memory usage, so it is not recommended for normal users. +config KEXEC + bool "Kexec system call (EXPERIMENTAL)" + depends on EXPERIMENTAL + help + kexec is a system call that implements the ability to shutdown your + current kernel, and to start another kernel. It is like a reboot + but it is indepedent of the system firmware. And like a reboot + you can start any kernel with it, not just Linux. + + The name comes from the similiarity to the exec system call. + + It is an ongoing process to be certain the hardware in a machine + is properly shutdown, so do not be surprised if this code does not + initially work for you. It may help to enable device hotplugging + support. As of this writing the exact hardware interface is + strongly in flux, so no good recommendation can be made. + +config SECCOMP + bool "Enable seccomp to safely compute untrusted bytecode" + depends on PROC_FS && BROKEN + default y + help + This kernel feature is useful for number crunching applications + that may need to compute untrusted bytecode during their + execution. By using pipes or other transports made available to + the process as file descriptors supporting the read/write + syscalls, it's possible to isolate those applications in + their own address space using seccomp. Once seccomp is + enabled via /proc//seccomp, it cannot be disabled + and the task is only allowed to execute a few safe syscalls + defined by each seccomp mode. + + If unsure, say Y. Only embedded should say N here. + endmenu config RWSEM_GENERIC_SPINLOCK @@ -2025,23 +2042,6 @@ config BINFMT_ELF32 bool default y if MIPS32_O32 || MIPS32_N32 -config SECCOMP - bool "Enable seccomp to safely compute untrusted bytecode" - depends on PROC_FS && BROKEN - default y - help - This kernel feature is useful for number crunching applications - that may need to compute untrusted bytecode during their - execution. By using pipes or other transports made available to - the process as file descriptors supporting the read/write - syscalls, it's possible to isolate those applications in - their own address space using seccomp. Once seccomp is - enabled via /proc//seccomp, it cannot be disabled - and the task is only allowed to execute a few safe syscalls - defined by each seccomp mode. - - If unsure, say Y. Only embedded should say N here. - config PM bool "Power Management support (EXPERIMENTAL)" depends on EXPERIMENTAL && SOC_AU1X00 -- cgit v1.2.3 From 70d21cdeef6331e67ed87262c894cd6601f0dccc Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Mon, 15 Jan 2007 00:07:25 +0900 Subject: [MIPS] use name instead of typename for each irq_chip The "typename" field was obsoleted by the "name" field. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/au1000/common/irq.c | 8 ++++---- arch/mips/ddb5xxx/ddb5477/irq_5477.c | 2 +- arch/mips/dec/ioasic-irq.c | 4 ++-- arch/mips/dec/kn02-irq.c | 2 +- arch/mips/emma2rh/common/irq_emma2rh.c | 2 +- arch/mips/emma2rh/markeins/irq_markeins.c | 4 ++-- arch/mips/gt64120/ev64120/irq.c | 2 +- arch/mips/jazz/irq.c | 2 +- arch/mips/jmr3927/rbhma3100/irq.c | 2 +- arch/mips/kernel/irq-msc01.c | 4 ++-- arch/mips/kernel/irq-mv6434x.c | 2 +- arch/mips/kernel/irq-rm7000.c | 2 +- arch/mips/kernel/irq-rm9000.c | 4 ++-- arch/mips/kernel/irq_cpu.c | 4 ++-- arch/mips/lasat/interrupt.c | 2 +- arch/mips/mips-boards/atlas/atlas_int.c | 2 +- arch/mips/momentum/ocelot_c/cpci-irq.c | 2 +- arch/mips/momentum/ocelot_c/uart-irq.c | 2 +- arch/mips/philips/pnx8550/common/int.c | 2 +- arch/mips/sgi-ip22/ip22-eisa.c | 4 ++-- arch/mips/sgi-ip22/ip22-int.c | 8 ++++---- arch/mips/sgi-ip27/ip27-irq.c | 2 +- arch/mips/sgi-ip27/ip27-timer.c | 2 +- arch/mips/sgi-ip32/ip32-irq.c | 10 +++++----- arch/mips/sibyte/bcm1480/irq.c | 2 +- arch/mips/sibyte/sb1250/irq.c | 2 +- arch/mips/sni/irq.c | 2 +- arch/mips/tx4927/common/tx4927_irq.c | 4 ++-- arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c | 12 ++++++------ arch/mips/tx4938/common/irq.c | 4 ++-- arch/mips/tx4938/toshiba_rbtx4938/irq.c | 2 +- arch/mips/vr41xx/common/icu.c | 4 ++-- 32 files changed, 56 insertions(+), 56 deletions(-) (limited to 'arch') diff --git a/arch/mips/au1000/common/irq.c b/arch/mips/au1000/common/irq.c index 9cf7b6715836..ea6e99fbe2f7 100644 --- a/arch/mips/au1000/common/irq.c +++ b/arch/mips/au1000/common/irq.c @@ -233,7 +233,7 @@ void restore_local_and_enable(int controller, unsigned long mask) static struct irq_chip rise_edge_irq_type = { - .typename = "Au1000 Rise Edge", + .name = "Au1000 Rise Edge", .ack = mask_and_ack_rise_edge_irq, .mask = local_disable_irq, .mask_ack = mask_and_ack_rise_edge_irq, @@ -242,7 +242,7 @@ static struct irq_chip rise_edge_irq_type = { }; static struct irq_chip fall_edge_irq_type = { - .typename = "Au1000 Fall Edge", + .name = "Au1000 Fall Edge", .ack = mask_and_ack_fall_edge_irq, .mask = local_disable_irq, .mask_ack = mask_and_ack_fall_edge_irq, @@ -251,7 +251,7 @@ static struct irq_chip fall_edge_irq_type = { }; static struct irq_chip either_edge_irq_type = { - .typename = "Au1000 Rise or Fall Edge", + .name = "Au1000 Rise or Fall Edge", .ack = mask_and_ack_either_edge_irq, .mask = local_disable_irq, .mask_ack = mask_and_ack_either_edge_irq, @@ -260,7 +260,7 @@ static struct irq_chip either_edge_irq_type = { }; static struct irq_chip level_irq_type = { - .typename = "Au1000 Level", + .name = "Au1000 Level", .ack = mask_and_ack_level_irq, .mask = local_disable_irq, .mask_ack = mask_and_ack_level_irq, diff --git a/arch/mips/ddb5xxx/ddb5477/irq_5477.c b/arch/mips/ddb5xxx/ddb5477/irq_5477.c index 96249aa5df5d..98c3b15eb369 100644 --- a/arch/mips/ddb5xxx/ddb5477/irq_5477.c +++ b/arch/mips/ddb5xxx/ddb5477/irq_5477.c @@ -82,7 +82,7 @@ vrc5477_irq_end(unsigned int irq) } struct irq_chip vrc5477_irq_controller = { - .typename = "vrc5477_irq", + .name = "vrc5477_irq", .ack = vrc5477_irq_ack, .mask = vrc5477_irq_disable, .mask_ack = vrc5477_irq_ack, diff --git a/arch/mips/dec/ioasic-irq.c b/arch/mips/dec/ioasic-irq.c index 4c7cb4048d35..3acb133668dc 100644 --- a/arch/mips/dec/ioasic-irq.c +++ b/arch/mips/dec/ioasic-irq.c @@ -62,7 +62,7 @@ static inline void end_ioasic_irq(unsigned int irq) } static struct irq_chip ioasic_irq_type = { - .typename = "IO-ASIC", + .name = "IO-ASIC", .ack = ack_ioasic_irq, .mask = mask_ioasic_irq, .mask_ack = ack_ioasic_irq, @@ -84,7 +84,7 @@ static inline void end_ioasic_dma_irq(unsigned int irq) } static struct irq_chip ioasic_dma_irq_type = { - .typename = "IO-ASIC-DMA", + .name = "IO-ASIC-DMA", .ack = ack_ioasic_dma_irq, .mask = mask_ioasic_dma_irq, .mask_ack = ack_ioasic_dma_irq, diff --git a/arch/mips/dec/kn02-irq.c b/arch/mips/dec/kn02-irq.c index 916e46b8ccd8..02439dc0ba83 100644 --- a/arch/mips/dec/kn02-irq.c +++ b/arch/mips/dec/kn02-irq.c @@ -58,7 +58,7 @@ static void ack_kn02_irq(unsigned int irq) } static struct irq_chip kn02_irq_type = { - .typename = "KN02-CSR", + .name = "KN02-CSR", .ack = ack_kn02_irq, .mask = mask_kn02_irq, .mask_ack = ack_kn02_irq, diff --git a/arch/mips/emma2rh/common/irq_emma2rh.c b/arch/mips/emma2rh/common/irq_emma2rh.c index 8d880f0b06ec..96df37b77759 100644 --- a/arch/mips/emma2rh/common/irq_emma2rh.c +++ b/arch/mips/emma2rh/common/irq_emma2rh.c @@ -57,7 +57,7 @@ static void emma2rh_irq_disable(unsigned int irq) } struct irq_chip emma2rh_irq_controller = { - .typename = "emma2rh_irq", + .name = "emma2rh_irq", .ack = emma2rh_irq_disable, .mask = emma2rh_irq_disable, .mask_ack = emma2rh_irq_disable, diff --git a/arch/mips/emma2rh/markeins/irq_markeins.c b/arch/mips/emma2rh/markeins/irq_markeins.c index 2116d9be5fa9..fba5c156f472 100644 --- a/arch/mips/emma2rh/markeins/irq_markeins.c +++ b/arch/mips/emma2rh/markeins/irq_markeins.c @@ -49,7 +49,7 @@ static void emma2rh_sw_irq_disable(unsigned int irq) } struct irq_chip emma2rh_sw_irq_controller = { - .typename = "emma2rh_sw_irq", + .name = "emma2rh_sw_irq", .ack = emma2rh_sw_irq_disable, .mask = emma2rh_sw_irq_disable, .mask_ack = emma2rh_sw_irq_disable, @@ -115,7 +115,7 @@ static void emma2rh_gpio_irq_end(unsigned int irq) } struct irq_chip emma2rh_gpio_irq_controller = { - .typename = "emma2rh_gpio_irq", + .name = "emma2rh_gpio_irq", .ack = emma2rh_gpio_irq_ack, .mask = emma2rh_gpio_irq_disable, .mask_ack = emma2rh_gpio_irq_ack, diff --git a/arch/mips/gt64120/ev64120/irq.c b/arch/mips/gt64120/ev64120/irq.c index b3e5796c81d7..04572b9c9642 100644 --- a/arch/mips/gt64120/ev64120/irq.c +++ b/arch/mips/gt64120/ev64120/irq.c @@ -88,7 +88,7 @@ static void end_ev64120_irq(unsigned int irq) } static struct irq_chip ev64120_irq_type = { - .typename = "EV64120", + .name = "EV64120", .ack = disable_ev64120_irq, .mask = disable_ev64120_irq, .mask_ack = disable_ev64120_irq, diff --git a/arch/mips/jazz/irq.c b/arch/mips/jazz/irq.c index f8d417b5c2bb..295892e4ce53 100644 --- a/arch/mips/jazz/irq.c +++ b/arch/mips/jazz/irq.c @@ -40,7 +40,7 @@ void disable_r4030_irq(unsigned int irq) } static struct irq_chip r4030_irq_type = { - .typename = "R4030", + .name = "R4030", .ack = disable_r4030_irq, .mask = disable_r4030_irq, .mask_ack = disable_r4030_irq, diff --git a/arch/mips/jmr3927/rbhma3100/irq.c b/arch/mips/jmr3927/rbhma3100/irq.c index 3da49c5aaf49..7d2c203cb406 100644 --- a/arch/mips/jmr3927/rbhma3100/irq.c +++ b/arch/mips/jmr3927/rbhma3100/irq.c @@ -439,7 +439,7 @@ void __init arch_init_irq(void) } static struct irq_chip jmr3927_irq_controller = { - .typename = "jmr3927_irq", + .name = "jmr3927_irq", .ack = jmr3927_irq_ack, .mask = jmr3927_irq_disable, .mask_ack = jmr3927_irq_ack, diff --git a/arch/mips/kernel/irq-msc01.c b/arch/mips/kernel/irq-msc01.c index bcaad6696082..2967537221e2 100644 --- a/arch/mips/kernel/irq-msc01.c +++ b/arch/mips/kernel/irq-msc01.c @@ -112,7 +112,7 @@ msc_bind_eic_interrupt (unsigned int irq, unsigned int set) } struct irq_chip msc_levelirq_type = { - .typename = "SOC-it-Level", + .name = "SOC-it-Level", .ack = level_mask_and_ack_msc_irq, .mask = mask_msc_irq, .mask_ack = level_mask_and_ack_msc_irq, @@ -122,7 +122,7 @@ struct irq_chip msc_levelirq_type = { }; struct irq_chip msc_edgeirq_type = { - .typename = "SOC-it-Edge", + .name = "SOC-it-Edge", .ack = edge_mask_and_ack_msc_irq, .mask = mask_msc_irq, .mask_ack = edge_mask_and_ack_msc_irq, diff --git a/arch/mips/kernel/irq-mv6434x.c b/arch/mips/kernel/irq-mv6434x.c index efbd219845b5..bf6015ede00d 100644 --- a/arch/mips/kernel/irq-mv6434x.c +++ b/arch/mips/kernel/irq-mv6434x.c @@ -92,7 +92,7 @@ void ll_mv64340_irq(void) } struct irq_chip mv64340_irq_type = { - .typename = "MV-64340", + .name = "MV-64340", .ack = mask_mv64340_irq, .mask = mask_mv64340_irq, .mask_ack = mask_mv64340_irq, diff --git a/arch/mips/kernel/irq-rm7000.c b/arch/mips/kernel/irq-rm7000.c index a60cfe5f4d18..250732883488 100644 --- a/arch/mips/kernel/irq-rm7000.c +++ b/arch/mips/kernel/irq-rm7000.c @@ -28,7 +28,7 @@ static inline void mask_rm7k_irq(unsigned int irq) } static struct irq_chip rm7k_irq_controller = { - .typename = "RM7000", + .name = "RM7000", .ack = mask_rm7k_irq, .mask = mask_rm7k_irq, .mask_ack = mask_rm7k_irq, diff --git a/arch/mips/kernel/irq-rm9000.c b/arch/mips/kernel/irq-rm9000.c index 27886db89a65..ae83d2df6f31 100644 --- a/arch/mips/kernel/irq-rm9000.c +++ b/arch/mips/kernel/irq-rm9000.c @@ -70,7 +70,7 @@ static void rm9k_perfcounter_irq_shutdown(unsigned int irq) } static struct irq_chip rm9k_irq_controller = { - .typename = "RM9000", + .name = "RM9000", .ack = mask_rm9k_irq, .mask = mask_rm9k_irq, .mask_ack = mask_rm9k_irq, @@ -78,7 +78,7 @@ static struct irq_chip rm9k_irq_controller = { }; static struct irq_chip rm9k_perfcounter_irq = { - .typename = "RM9000", + .name = "RM9000", .startup = rm9k_perfcounter_irq_startup, .shutdown = rm9k_perfcounter_irq_shutdown, .ack = mask_rm9k_irq, diff --git a/arch/mips/kernel/irq_cpu.c b/arch/mips/kernel/irq_cpu.c index 6e73ddaeae74..7b66e03b5899 100644 --- a/arch/mips/kernel/irq_cpu.c +++ b/arch/mips/kernel/irq_cpu.c @@ -49,7 +49,7 @@ static inline void mask_mips_irq(unsigned int irq) } static struct irq_chip mips_cpu_irq_controller = { - .typename = "MIPS", + .name = "MIPS", .ack = mask_mips_irq, .mask = mask_mips_irq, .mask_ack = mask_mips_irq, @@ -88,7 +88,7 @@ static void mips_mt_cpu_irq_ack(unsigned int irq) } static struct irq_chip mips_mt_cpu_irq_controller = { - .typename = "MIPS", + .name = "MIPS", .startup = mips_mt_cpu_irq_startup, .ack = mips_mt_cpu_irq_ack, .mask = mask_mips_mt_irq, diff --git a/arch/mips/lasat/interrupt.c b/arch/mips/lasat/interrupt.c index 2affa5ff171c..9a622b9a1051 100644 --- a/arch/mips/lasat/interrupt.c +++ b/arch/mips/lasat/interrupt.c @@ -45,7 +45,7 @@ void enable_lasat_irq(unsigned int irq_nr) } static struct irq_chip lasat_irq_type = { - .typename = "Lasat", + .name = "Lasat", .ack = disable_lasat_irq, .mask = disable_lasat_irq, .mask_ack = disable_lasat_irq, diff --git a/arch/mips/mips-boards/atlas/atlas_int.c b/arch/mips/mips-boards/atlas/atlas_int.c index 85482a631e8c..6cfcd8fedcce 100644 --- a/arch/mips/mips-boards/atlas/atlas_int.c +++ b/arch/mips/mips-boards/atlas/atlas_int.c @@ -69,7 +69,7 @@ static void end_atlas_irq(unsigned int irq) } static struct irq_chip atlas_irq_type = { - .typename = "Atlas", + .name = "Atlas", .ack = disable_atlas_irq, .mask = disable_atlas_irq, .mask_ack = disable_atlas_irq, diff --git a/arch/mips/momentum/ocelot_c/cpci-irq.c b/arch/mips/momentum/ocelot_c/cpci-irq.c index bb11fef08472..186a140fd2a9 100644 --- a/arch/mips/momentum/ocelot_c/cpci-irq.c +++ b/arch/mips/momentum/ocelot_c/cpci-irq.c @@ -84,7 +84,7 @@ void ll_cpci_irq(void) } struct irq_chip cpci_irq_type = { - .typename = "CPCI/FPGA", + .name = "CPCI/FPGA", .ack = mask_cpci_irq, .mask = mask_cpci_irq, .mask_ack = mask_cpci_irq, diff --git a/arch/mips/momentum/ocelot_c/uart-irq.c b/arch/mips/momentum/ocelot_c/uart-irq.c index a7a80c0da569..de1a31ee52f3 100644 --- a/arch/mips/momentum/ocelot_c/uart-irq.c +++ b/arch/mips/momentum/ocelot_c/uart-irq.c @@ -77,7 +77,7 @@ void ll_uart_irq(void) } struct irq_chip uart_irq_type = { - .typename = "UART/FPGA", + .name = "UART/FPGA", .ack = mask_uart_irq, .mask = mask_uart_irq, .mask_ack = mask_uart_irq, diff --git a/arch/mips/philips/pnx8550/common/int.c b/arch/mips/philips/pnx8550/common/int.c index 2c36c108c4d6..d48665ebd33c 100644 --- a/arch/mips/philips/pnx8550/common/int.c +++ b/arch/mips/philips/pnx8550/common/int.c @@ -159,7 +159,7 @@ int pnx8550_set_gic_priority(int irq, int priority) } static struct irq_chip level_irq_type = { - .typename = "PNX Level IRQ", + .name = "PNX Level IRQ", .ack = mask_irq, .mask = mask_irq, .mask_ack = mask_irq, diff --git a/arch/mips/sgi-ip22/ip22-eisa.c b/arch/mips/sgi-ip22/ip22-eisa.c index a1a9af6da7bf..6b6e97b90c6e 100644 --- a/arch/mips/sgi-ip22/ip22-eisa.c +++ b/arch/mips/sgi-ip22/ip22-eisa.c @@ -139,7 +139,7 @@ static void end_eisa1_irq(unsigned int irq) } static struct irq_chip ip22_eisa1_irq_type = { - .typename = "IP22 EISA", + .name = "IP22 EISA", .startup = startup_eisa1_irq, .ack = mask_and_ack_eisa1_irq, .mask = disable_eisa1_irq, @@ -194,7 +194,7 @@ static void end_eisa2_irq(unsigned int irq) } static struct irq_chip ip22_eisa2_irq_type = { - .typename = "IP22 EISA", + .name = "IP22 EISA", .startup = startup_eisa2_irq, .ack = mask_and_ack_eisa2_irq, .mask = disable_eisa2_irq, diff --git a/arch/mips/sgi-ip22/ip22-int.c b/arch/mips/sgi-ip22/ip22-int.c index f3d2ae374c72..b454924aeb56 100644 --- a/arch/mips/sgi-ip22/ip22-int.c +++ b/arch/mips/sgi-ip22/ip22-int.c @@ -53,7 +53,7 @@ static void disable_local0_irq(unsigned int irq) } static struct irq_chip ip22_local0_irq_type = { - .typename = "IP22 local 0", + .name = "IP22 local 0", .ack = disable_local0_irq, .mask = disable_local0_irq, .mask_ack = disable_local0_irq, @@ -74,7 +74,7 @@ void disable_local1_irq(unsigned int irq) } static struct irq_chip ip22_local1_irq_type = { - .typename = "IP22 local 1", + .name = "IP22 local 1", .ack = disable_local1_irq, .mask = disable_local1_irq, .mask_ack = disable_local1_irq, @@ -95,7 +95,7 @@ void disable_local2_irq(unsigned int irq) } static struct irq_chip ip22_local2_irq_type = { - .typename = "IP22 local 2", + .name = "IP22 local 2", .ack = disable_local2_irq, .mask = disable_local2_irq, .mask_ack = disable_local2_irq, @@ -116,7 +116,7 @@ void disable_local3_irq(unsigned int irq) } static struct irq_chip ip22_local3_irq_type = { - .typename = "IP22 local 3", + .name = "IP22 local 3", .ack = disable_local3_irq, .mask = disable_local3_irq, .mask_ack = disable_local3_irq, diff --git a/arch/mips/sgi-ip27/ip27-irq.c b/arch/mips/sgi-ip27/ip27-irq.c index 319f8803ef6f..60ade7690e09 100644 --- a/arch/mips/sgi-ip27/ip27-irq.c +++ b/arch/mips/sgi-ip27/ip27-irq.c @@ -333,7 +333,7 @@ static inline void disable_bridge_irq(unsigned int irq) } static struct irq_chip bridge_irq_type = { - .typename = "bridge", + .name = "bridge", .startup = startup_bridge_irq, .shutdown = shutdown_bridge_irq, .ack = disable_bridge_irq, diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c index c20e9899b34b..9ce513629b14 100644 --- a/arch/mips/sgi-ip27/ip27-timer.c +++ b/arch/mips/sgi-ip27/ip27-timer.c @@ -181,7 +181,7 @@ static void disable_rt_irq(unsigned int irq) } static struct irq_chip rt_irq_type = { - .typename = "SN HUB RT timer", + .name = "SN HUB RT timer", .ack = disable_rt_irq, .mask = disable_rt_irq, .mask_ack = disable_rt_irq, diff --git a/arch/mips/sgi-ip32/ip32-irq.c b/arch/mips/sgi-ip32/ip32-irq.c index ae063864c026..8c450d9e8696 100644 --- a/arch/mips/sgi-ip32/ip32-irq.c +++ b/arch/mips/sgi-ip32/ip32-irq.c @@ -144,7 +144,7 @@ static void end_cpu_irq(unsigned int irq) } static struct irq_chip ip32_cpu_interrupt = { - .typename = "IP32 CPU", + .name = "IP32 CPU", .ack = disable_cpu_irq, .mask = disable_cpu_irq, .mask_ack = disable_cpu_irq, @@ -193,7 +193,7 @@ static void end_crime_irq(unsigned int irq) } static struct irq_chip ip32_crime_interrupt = { - .typename = "IP32 CRIME", + .name = "IP32 CRIME", .ack = mask_and_ack_crime_irq, .mask = disable_crime_irq, .mask_ack = mask_and_ack_crime_irq, @@ -234,7 +234,7 @@ static void end_macepci_irq(unsigned int irq) } static struct irq_chip ip32_macepci_interrupt = { - .typename = "IP32 MACE PCI", + .name = "IP32 MACE PCI", .ack = disable_macepci_irq, .mask = disable_macepci_irq, .mask_ack = disable_macepci_irq, @@ -347,7 +347,7 @@ static void end_maceisa_irq(unsigned irq) } static struct irq_chip ip32_maceisa_interrupt = { - .typename = "IP32 MACE ISA", + .name = "IP32 MACE ISA", .ack = mask_and_ack_maceisa_irq, .mask = disable_maceisa_irq, .mask_ack = mask_and_ack_maceisa_irq, @@ -379,7 +379,7 @@ static void end_mace_irq(unsigned int irq) } static struct irq_chip ip32_mace_interrupt = { - .typename = "IP32 MACE", + .name = "IP32 MACE", .ack = disable_mace_irq, .mask = disable_mace_irq, .mask_ack = disable_mace_irq, diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c index 2e8f6b2e2420..1dc5d05d8962 100644 --- a/arch/mips/sibyte/bcm1480/irq.c +++ b/arch/mips/sibyte/bcm1480/irq.c @@ -82,7 +82,7 @@ extern char sb1250_duart_present[]; #endif static struct irq_chip bcm1480_irq_type = { - .typename = "BCM1480-IMR", + .name = "BCM1480-IMR", .ack = ack_bcm1480_irq, .mask = disable_bcm1480_irq, .mask_ack = ack_bcm1480_irq, diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c index 82ce7533053f..148239446e6e 100644 --- a/arch/mips/sibyte/sb1250/irq.c +++ b/arch/mips/sibyte/sb1250/irq.c @@ -67,7 +67,7 @@ extern char sb1250_duart_present[]; #endif static struct irq_chip sb1250_irq_type = { - .typename = "SB1250-IMR", + .name = "SB1250-IMR", .ack = ack_sb1250_irq, .mask = disable_sb1250_irq, .mask_ack = ack_sb1250_irq, diff --git a/arch/mips/sni/irq.c b/arch/mips/sni/irq.c index 8511bcc6d99d..039e8e540508 100644 --- a/arch/mips/sni/irq.c +++ b/arch/mips/sni/irq.c @@ -37,7 +37,7 @@ static void end_pciasic_irq(unsigned int irq) } static struct irq_chip pciasic_irq_type = { - .typename = "ASIC-PCI", + .name = "ASIC-PCI", .ack = disable_pciasic_irq, .mask = disable_pciasic_irq, .mask_ack = disable_pciasic_irq, diff --git a/arch/mips/tx4927/common/tx4927_irq.c b/arch/mips/tx4927/common/tx4927_irq.c index ed4a19adf361..e7f3e5b84dcf 100644 --- a/arch/mips/tx4927/common/tx4927_irq.c +++ b/arch/mips/tx4927/common/tx4927_irq.c @@ -120,7 +120,7 @@ static void tx4927_irq_pic_disable(unsigned int irq); #define TX4927_CP0_NAME "TX4927-CP0" static struct irq_chip tx4927_irq_cp0_type = { - .typename = TX4927_CP0_NAME, + .name = TX4927_CP0_NAME, .ack = tx4927_irq_cp0_disable, .mask = tx4927_irq_cp0_disable, .mask_ack = tx4927_irq_cp0_disable, @@ -129,7 +129,7 @@ static struct irq_chip tx4927_irq_cp0_type = { #define TX4927_PIC_NAME "TX4927-PIC" static struct irq_chip tx4927_irq_pic_type = { - .typename = TX4927_PIC_NAME, + .name = TX4927_PIC_NAME, .ack = tx4927_irq_pic_disable, .mask = tx4927_irq_pic_disable, .mask_ack = tx4927_irq_pic_disable, diff --git a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c index b54b529a29f9..dcce88f403c9 100644 --- a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c +++ b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c @@ -228,7 +228,7 @@ static void toshiba_rbtx4927_irq_isa_mask_and_ack(unsigned int irq); #define TOSHIBA_RBTX4927_IOC_NAME "RBTX4927-IOC" static struct irq_chip toshiba_rbtx4927_irq_ioc_type = { - .typename = TOSHIBA_RBTX4927_IOC_NAME, + .name = TOSHIBA_RBTX4927_IOC_NAME, .ack = toshiba_rbtx4927_irq_ioc_disable, .mask = toshiba_rbtx4927_irq_ioc_disable, .mask_ack = toshiba_rbtx4927_irq_ioc_disable, @@ -241,7 +241,7 @@ static struct irq_chip toshiba_rbtx4927_irq_ioc_type = { #ifdef CONFIG_TOSHIBA_FPCIB0 #define TOSHIBA_RBTX4927_ISA_NAME "RBTX4927-ISA" static struct irq_chip toshiba_rbtx4927_irq_isa_type = { - .typename = TOSHIBA_RBTX4927_ISA_NAME, + .name = TOSHIBA_RBTX4927_ISA_NAME, .ack = toshiba_rbtx4927_irq_isa_mask_and_ack, .mask = toshiba_rbtx4927_irq_isa_disable, .mask_ack = toshiba_rbtx4927_irq_isa_mask_and_ack, @@ -490,13 +490,13 @@ void toshiba_rbtx4927_irq_dump(char *key) { u32 i, j = 0; for (i = 0; i < NR_IRQS; i++) { - if (strcmp(irq_desc[i].chip->typename, "none") + if (strcmp(irq_desc[i].chip->name, "none") == 0) continue; if ((i >= 1) - && (irq_desc[i - 1].chip->typename == - irq_desc[i].chip->typename)) { + && (irq_desc[i - 1].chip->name == + irq_desc[i].chip->name)) { j++; } else { j = 0; @@ -510,7 +510,7 @@ void toshiba_rbtx4927_irq_dump(char *key) (u32) (irq_desc[i].action ? irq_desc[i]. action->handler : 0), irq_desc[i].depth, - irq_desc[i].chip->typename, j); + irq_desc[i].chip->name, j); } } #endif diff --git a/arch/mips/tx4938/common/irq.c b/arch/mips/tx4938/common/irq.c index a347b424d91c..3a2dbfc25014 100644 --- a/arch/mips/tx4938/common/irq.c +++ b/arch/mips/tx4938/common/irq.c @@ -49,7 +49,7 @@ static void tx4938_irq_pic_disable(unsigned int irq); #define TX4938_CP0_NAME "TX4938-CP0" static struct irq_chip tx4938_irq_cp0_type = { - .typename = TX4938_CP0_NAME, + .name = TX4938_CP0_NAME, .ack = tx4938_irq_cp0_disable, .mask = tx4938_irq_cp0_disable, .mask_ack = tx4938_irq_cp0_disable, @@ -58,7 +58,7 @@ static struct irq_chip tx4938_irq_cp0_type = { #define TX4938_PIC_NAME "TX4938-PIC" static struct irq_chip tx4938_irq_pic_type = { - .typename = TX4938_PIC_NAME, + .name = TX4938_PIC_NAME, .ack = tx4938_irq_pic_disable, .mask = tx4938_irq_pic_disable, .mask_ack = tx4938_irq_pic_disable, diff --git a/arch/mips/tx4938/toshiba_rbtx4938/irq.c b/arch/mips/tx4938/toshiba_rbtx4938/irq.c index b6f363d08011..2e96dbb248b1 100644 --- a/arch/mips/tx4938/toshiba_rbtx4938/irq.c +++ b/arch/mips/tx4938/toshiba_rbtx4938/irq.c @@ -92,7 +92,7 @@ static void toshiba_rbtx4938_irq_ioc_disable(unsigned int irq); #define TOSHIBA_RBTX4938_IOC_NAME "RBTX4938-IOC" static struct irq_chip toshiba_rbtx4938_irq_ioc_type = { - .typename = TOSHIBA_RBTX4938_IOC_NAME, + .name = TOSHIBA_RBTX4938_IOC_NAME, .ack = toshiba_rbtx4938_irq_ioc_disable, .mask = toshiba_rbtx4938_irq_ioc_disable, .mask_ack = toshiba_rbtx4938_irq_ioc_disable, diff --git a/arch/mips/vr41xx/common/icu.c b/arch/mips/vr41xx/common/icu.c index 34622f3f5ff4..adabc6bad440 100644 --- a/arch/mips/vr41xx/common/icu.c +++ b/arch/mips/vr41xx/common/icu.c @@ -453,7 +453,7 @@ static void enable_sysint1_irq(unsigned int irq) } static struct irq_chip sysint1_irq_type = { - .typename = "SYSINT1", + .name = "SYSINT1", .ack = disable_sysint1_irq, .mask = disable_sysint1_irq, .mask_ack = disable_sysint1_irq, @@ -471,7 +471,7 @@ static void enable_sysint2_irq(unsigned int irq) } static struct irq_chip sysint2_irq_type = { - .typename = "SYSINT2", + .name = "SYSINT2", .ack = disable_sysint2_irq, .mask = disable_sysint2_irq, .mask_ack = disable_sysint2_irq, -- cgit v1.2.3 From 24d55728dc96d2cb8f49064e012559300eb97610 Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Thu, 18 Jan 2007 22:27:11 +0900 Subject: [MIPS] vr41xx: Use symbolic names for IRQ numers Signed-off-by: Yoichi Yuasa Signed-off-by: Ralf Baechle --- arch/mips/vr41xx/common/irq.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/mips/vr41xx/common/irq.c b/arch/mips/vr41xx/common/irq.c index 697fcc260141..cba36a247e32 100644 --- a/arch/mips/vr41xx/common/irq.c +++ b/arch/mips/vr41xx/common/irq.c @@ -95,22 +95,22 @@ asmlinkage void plat_irq_dispatch(void) unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM; if (pending & CAUSEF_IP7) - do_IRQ(7); + do_IRQ(TIMER_IRQ); else if (pending & 0x7800) { if (pending & CAUSEF_IP3) - irq_dispatch(3); + irq_dispatch(INT1_IRQ); else if (pending & CAUSEF_IP4) - irq_dispatch(4); + irq_dispatch(INT2_IRQ); else if (pending & CAUSEF_IP5) - irq_dispatch(5); + irq_dispatch(INT3_IRQ); else if (pending & CAUSEF_IP6) - irq_dispatch(6); + irq_dispatch(INT4_IRQ); } else if (pending & CAUSEF_IP2) - irq_dispatch(2); + irq_dispatch(INT0_IRQ); else if (pending & CAUSEF_IP0) - do_IRQ(0); + do_IRQ(MIPS_SOFTINT0_IRQ); else if (pending & CAUSEF_IP1) - do_IRQ(1); + do_IRQ(MIPS_SOFTINT1_IRQ); else spurious_interrupt(); } -- cgit v1.2.3 From 130e2fb78305b148b15cd3b5129596844c5f5e4f Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 6 Feb 2007 16:53:15 +0000 Subject: [MIPS] Kconfig: Provide sane NR_CPUS defaults for more configurations Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 35 ++++++++++++++++++++++++++++++++--- 1 file changed, 32 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 21db07efd7a0..44a0224c32dd 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -575,6 +575,7 @@ config SGI_IP27 select DMA_IP27 select EARLY_PRINTK select HW_HAS_PCI + select NR_CPUS_DEFAULT_64 select PCI_DOMAINS select SYS_HAS_CPU_R10000 select SYS_SUPPORTS_64BIT_KERNEL @@ -612,6 +613,7 @@ config SIBYTE_BIGSUR bool "Sibyte BCM91480B-BigSur" select BOOT_ELF32 select DMA_COHERENT + select NR_CPUS_DEFAULT_4 select PCI_DOMAINS select SIBYTE_BCM1x80 select SWAP_IO_SPACE @@ -623,6 +625,7 @@ config SIBYTE_SWARM bool "Sibyte BCM91250A-SWARM" select BOOT_ELF32 select DMA_COHERENT + select NR_CPUS_DEFAULT_2 select SIBYTE_SB1250 select SWAP_IO_SPACE select SYS_HAS_CPU_SB1 @@ -635,6 +638,7 @@ config SIBYTE_SENTOSA depends on EXPERIMENTAL select BOOT_ELF32 select DMA_COHERENT + select NR_CPUS_DEFAULT_2 select SIBYTE_SB1250 select SWAP_IO_SPACE select SYS_HAS_CPU_SB1 @@ -668,6 +672,7 @@ config SIBYTE_PTSWARM depends on EXPERIMENTAL select BOOT_ELF32 select DMA_COHERENT + select NR_CPUS_DEFAULT_2 select SIBYTE_SB1250 select SWAP_IO_SPACE select SYS_HAS_CPU_SB1 @@ -680,6 +685,7 @@ config SIBYTE_LITTLESUR depends on EXPERIMENTAL select BOOT_ELF32 select DMA_COHERENT + select NR_CPUS_DEFAULT_2 select SIBYTE_SB1250 select SWAP_IO_SPACE select SYS_HAS_CPU_SB1 @@ -1524,6 +1530,8 @@ config MIPS_MT_SMTC select CPU_MIPSR2_IRQ_VI select CPU_MIPSR2_SRS select MIPS_MT + select NR_CPUS_DEFAULT_2 + select NR_CPUS_DEFAULT_8 select SMP select SYS_SUPPORTS_SMP help @@ -1739,13 +1747,34 @@ config SMP config SYS_SUPPORTS_SMP bool +config NR_CPUS_DEFAULT_2 + bool + +config NR_CPUS_DEFAULT_4 + bool + +config NR_CPUS_DEFAULT_8 + bool + +config NR_CPUS_DEFAULT_16 + bool + +config NR_CPUS_DEFAULT_32 + bool + +config NR_CPUS_DEFAULT_64 + bool + config NR_CPUS int "Maximum number of CPUs (2-64)" range 2 64 depends on SMP - default "64" if SGI_IP27 - default "2" - default "8" if MIPS_MT_SMTC + default "2" if NR_CPUS_DEFAULT_2 + default "4" if NR_CPUS_DEFAULT_4 + default "8" if NR_CPUS_DEFAULT_8 + default "16" if NR_CPUS_DEFAULT_16 + default "32" if NR_CPUS_DEFAULT_32 + default "64" if NR_CPUS_DEFAULT_64 help This allows you to specify the maximum number of CPUs which this kernel will support. The maximum supported value is 32 for 32-bit -- cgit v1.2.3 From 69a6c312e5ebb2e929ceb67e6246e2d9314f1d29 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Wed, 24 Jan 2007 01:21:05 +0900 Subject: [MIPS] Move some kernel globals from asm file to C file. This get rid of some undesirable hole in BSS section due to random order of placement. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/kernel/asm-offsets.c | 4 ---- arch/mips/kernel/head.S | 25 ------------------------- arch/mips/kernel/setup.c | 3 +++ arch/mips/mm/init.c | 15 +++++++++++++++ 4 files changed, 18 insertions(+), 29 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/asm-offsets.c b/arch/mips/kernel/asm-offsets.c index ff88b06f89df..ea7df4b8da33 100644 --- a/arch/mips/kernel/asm-offsets.c +++ b/arch/mips/kernel/asm-offsets.c @@ -234,10 +234,6 @@ void output_mm_defines(void) constant("#define _PMD_SHIFT ", PMD_SHIFT); constant("#define _PGDIR_SHIFT ", PGDIR_SHIFT); linefeed; - constant("#define _PGD_ORDER ", PGD_ORDER); - constant("#define _PMD_ORDER ", PMD_ORDER); - constant("#define _PTE_ORDER ", PTE_ORDER); - linefeed; constant("#define _PTRS_PER_PGD ", PTRS_PER_PGD); constant("#define _PTRS_PER_PMD ", PTRS_PER_PMD); constant("#define _PTRS_PER_PTE ", PTRS_PER_PTE); diff --git a/arch/mips/kernel/head.S b/arch/mips/kernel/head.S index 9a7811d13db2..6f57ca44291f 100644 --- a/arch/mips/kernel/head.S +++ b/arch/mips/kernel/head.S @@ -231,28 +231,3 @@ NESTED(smp_bootstrap, 16, sp) #endif /* CONFIG_SMP */ __FINIT - - .comm kernelsp, NR_CPUS * 8, 8 - .comm pgd_current, NR_CPUS * 8, 8 - - .comm fw_arg0, SZREG, SZREG # firmware arguments - .comm fw_arg1, SZREG, SZREG - .comm fw_arg2, SZREG, SZREG - .comm fw_arg3, SZREG, SZREG - - .macro page name, order - .comm \name, (_PAGE_SIZE << \order), (_PAGE_SIZE << \order) - .endm - - /* - * On 64-bit we've got three-level pagetables with a slightly - * different layout ... - */ - page swapper_pg_dir, _PGD_ORDER -#ifdef CONFIG_64BIT -#if defined(CONFIG_MODULES) && !defined(CONFIG_BUILD_ELF64) - page module_pg_dir, _PGD_ORDER -#endif - page invalid_pmd_table, _PMD_ORDER -#endif - page invalid_pte_table, _PTE_ORDER diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index e1d76b87601c..c4359791bd5c 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -563,3 +563,6 @@ int __init dsp_disable(char *s) } __setup("nodsp", dsp_disable); + +unsigned long kernelsp[NR_CPUS]; +unsigned long fw_arg0, fw_arg1, fw_arg2, fw_arg3; diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c index 5257f7b42fd2..125a4a85ec05 100644 --- a/arch/mips/mm/init.c +++ b/arch/mips/mm/init.c @@ -499,3 +499,18 @@ void free_initmem(void) __pa_symbol(&__init_begin), __pa_symbol(&__init_end)); } + +unsigned long pgd_current[NR_CPUS]; +/* + * On 64-bit we've got three-level pagetables with a slightly + * different layout ... + */ +#define __page_aligned(order) __attribute__((__aligned__(PAGE_SIZE< Date: Tue, 6 Feb 2007 16:53:16 +0000 Subject: [MIPS] SMTC: remove unused atomic_postclear Signed-off-by: Ralf Baechle --- arch/mips/kernel/smtc.c | 22 ---------------------- 1 file changed, 22 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c index 6a2763143771..19c58fcd088c 100644 --- a/arch/mips/kernel/smtc.c +++ b/arch/mips/kernel/smtc.c @@ -676,28 +676,6 @@ static __inline__ int atomic_postincrement(unsigned int *pv) return result; } -/* No longer used in IPI dispatch, but retained for future recycling */ - -static __inline__ int atomic_postclear(unsigned int *pv) -{ - unsigned long result; - - unsigned long temp; - - __asm__ __volatile__( - "1: ll %0, %2 \n" - " or %1, $0, $0 \n" - " sc %1, %2 \n" - " beqz %1, 1b \n" - " sync \n" - : "=&r" (result), "=&r" (temp), "=m" (*pv) - : "m" (*pv) - : "memory"); - - return result; -} - - void smtc_send_ipi(int cpu, int type, unsigned int action) { int tcstatus; -- cgit v1.2.3 From be6e143741226ca59b24e6760de4578a5d4f98d7 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 6 Feb 2007 16:53:17 +0000 Subject: [MIPS] vpe_elfload and vpe_run are only used locally, make them static. Signed-off-by: Ralf Baechle --- arch/mips/kernel/vpe.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c index 458fccf87c54..f31b15a56a4f 100644 --- a/arch/mips/kernel/vpe.c +++ b/arch/mips/kernel/vpe.c @@ -695,7 +695,7 @@ static void dump_tclist(void) } /* We are prepared so configure and start the VPE... */ -int vpe_run(struct vpe * v) +static int vpe_run(struct vpe * v) { struct vpe_notifications *n; unsigned long val, dmt_flag; @@ -832,7 +832,7 @@ static int find_vpe_symbols(struct vpe * v, Elf_Shdr * sechdrs, * contents of the program (p)buffer performing relocatations/etc, free's it * when finished. */ -int vpe_elfload(struct vpe * v) +static int vpe_elfload(struct vpe * v) { Elf_Ehdr *hdr; Elf_Shdr *sechdrs; -- cgit v1.2.3 From 4a969e1e223d517dd568c84ba3a66542a72c3680 Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Thu, 1 Feb 2007 05:45:14 -0500 Subject: [MIPS] Remove superfluous "ifdef CONFIG_KGDB". Given that the Makefiles involved already have conditional compilation of the form: obj-$(CONFIG_KGDB) += dbg_io.o there seems to be little value for the dbg_io.c source files to check that config variable yet again. Signed-off-by: Robert P. J. Day Signed-off-by: Ralf Baechle --- arch/mips/gt64120/momenco_ocelot/dbg_io.c | 4 ---- arch/mips/momentum/ocelot_c/dbg_io.c | 4 ---- arch/mips/momentum/ocelot_g/dbg_io.c | 4 ---- 3 files changed, 12 deletions(-) (limited to 'arch') diff --git a/arch/mips/gt64120/momenco_ocelot/dbg_io.c b/arch/mips/gt64120/momenco_ocelot/dbg_io.c index 2128684584f5..32d6fb4ee679 100644 --- a/arch/mips/gt64120/momenco_ocelot/dbg_io.c +++ b/arch/mips/gt64120/momenco_ocelot/dbg_io.c @@ -1,6 +1,4 @@ -#ifdef CONFIG_KGDB - #include /* For the serial port location and base baud */ /* --- CONFIG --- */ @@ -121,5 +119,3 @@ int putDebugChar(uint8 byte) UART16550_WRITE(OFS_SEND_BUFFER, byte); return 1; } - -#endif diff --git a/arch/mips/momentum/ocelot_c/dbg_io.c b/arch/mips/momentum/ocelot_c/dbg_io.c index 2128684584f5..32d6fb4ee679 100644 --- a/arch/mips/momentum/ocelot_c/dbg_io.c +++ b/arch/mips/momentum/ocelot_c/dbg_io.c @@ -1,6 +1,4 @@ -#ifdef CONFIG_KGDB - #include /* For the serial port location and base baud */ /* --- CONFIG --- */ @@ -121,5 +119,3 @@ int putDebugChar(uint8 byte) UART16550_WRITE(OFS_SEND_BUFFER, byte); return 1; } - -#endif diff --git a/arch/mips/momentum/ocelot_g/dbg_io.c b/arch/mips/momentum/ocelot_g/dbg_io.c index 2128684584f5..32d6fb4ee679 100644 --- a/arch/mips/momentum/ocelot_g/dbg_io.c +++ b/arch/mips/momentum/ocelot_g/dbg_io.c @@ -1,6 +1,4 @@ -#ifdef CONFIG_KGDB - #include /* For the serial port location and base baud */ /* --- CONFIG --- */ @@ -121,5 +119,3 @@ int putDebugChar(uint8 byte) UART16550_WRITE(OFS_SEND_BUFFER, byte); return 1; } - -#endif -- cgit v1.2.3 From 06396094b2fad0c429cde795dac4a72bc4d32bf2 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 2 Feb 2007 11:13:35 +0000 Subject: [MIPS] Do not allow oprofile to be enabled on SMTC. Oprofile cannot work on SMTC due to the limited number of counters. Signed-off-by: Ralf Baechle --- arch/mips/oprofile/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/oprofile/Kconfig b/arch/mips/oprofile/Kconfig index 55feaf798596..ca395ef06d4e 100644 --- a/arch/mips/oprofile/Kconfig +++ b/arch/mips/oprofile/Kconfig @@ -11,7 +11,7 @@ config PROFILING config OPROFILE tristate "OProfile system profiling (EXPERIMENTAL)" - depends on PROFILING && EXPERIMENTAL + depends on PROFILING && !!MIPS_MT_SMTC && EXPERIMENTAL help OProfile is a profiling system capable of profiling the whole system, include the kernel, kernel modules, libraries, -- cgit v1.2.3 From 19487f1e8a288da0d84b48d086167cf328080938 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Sun, 4 Feb 2007 00:57:25 +0900 Subject: [MIPS] Fix pb1200/irqmap.c and apply some missed patches pb1200/irqmap.c had been broken a while due to non-named initializer and had missed some recent IRQ related changes. Apply these commits to this file. [MIPS] IRQ cleanups commit 1603b5aca4f15b34848fb5594d0c7b6333b99144 [MIPS] use generic_handle_irq, handle_level_irq, handle_percpu_irq commit 1417836e81c0ab8f5a0bfeafa90d3eaa41b2a067 [MIPS] Compile __do_IRQ() when really needed commit e77c232cfc6e1250b2916a7c69225d6634d05a49 Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/au1000/pb1200/irqmap.c | 32 ++++++++++---------------------- 1 file changed, 10 insertions(+), 22 deletions(-) (limited to 'arch') diff --git a/arch/mips/au1000/pb1200/irqmap.c b/arch/mips/au1000/pb1200/irqmap.c index 91983ba407c4..b73b2d18bf56 100644 --- a/arch/mips/au1000/pb1200/irqmap.c +++ b/arch/mips/au1000/pb1200/irqmap.c @@ -137,33 +137,20 @@ static void pb1200_shutdown_irq( unsigned int irq_nr ) return; } -static inline void pb1200_mask_and_ack_irq(unsigned int irq_nr) -{ - pb1200_disable_irq( irq_nr ); -} - -static void pb1200_end_irq(unsigned int irq_nr) -{ - if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))) { - pb1200_enable_irq(irq_nr); - } -} - static struct irq_chip external_irq_type = { #ifdef CONFIG_MIPS_PB1200 - "Pb1200 Ext", + .name = "Pb1200 Ext", #endif #ifdef CONFIG_MIPS_DB1200 - "Db1200 Ext", + .name = "Db1200 Ext", #endif - pb1200_startup_irq, - pb1200_shutdown_irq, - pb1200_enable_irq, - pb1200_disable_irq, - pb1200_mask_and_ack_irq, - pb1200_end_irq, - NULL + .startup = pb1200_startup_irq, + .shutdown = pb1200_shutdown_irq, + .ack = pb1200_disable_irq, + .mask = pb1200_disable_irq, + .mask_ack = pb1200_disable_irq, + .unmask = pb1200_enable_irq, }; void _board_init_irq(void) @@ -172,7 +159,8 @@ void _board_init_irq(void) for (irq_nr = PB1200_INT_BEGIN; irq_nr <= PB1200_INT_END; irq_nr++) { - irq_desc[irq_nr].chip = &external_irq_type; + set_irq_chip_and_handler(irq_nr, &external_irq_type, + handle_level_irq); pb1200_disable_irq(irq_nr); } -- cgit v1.2.3 From 811d944901705b8c14b945ba51caff5e912bb9e3 Mon Sep 17 00:00:00 2001 From: Mathieu Desnoyers Date: Sat, 3 Feb 2007 23:16:51 -0500 Subject: [MIPS] Add missing ifdef arch/mips/pmc-sierra/yosemite/setup.c early_serial_setup is only defined when CONFIG_SERIAL_8250 is set. Signed-off-by: Mathieu Desnoyers Signed-off-by: Ralf Baechle --- arch/mips/pmc-sierra/yosemite/setup.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/mips/pmc-sierra/yosemite/setup.c b/arch/mips/pmc-sierra/yosemite/setup.c index 1b9b0d396d3e..6a6e15e40009 100644 --- a/arch/mips/pmc-sierra/yosemite/setup.c +++ b/arch/mips/pmc-sierra/yosemite/setup.c @@ -171,6 +171,7 @@ static void __init py_map_ocd(void) static void __init py_uart_setup(void) { +#ifdef CONFIG_SERIAL_8250 struct uart_port up; /* @@ -188,6 +189,7 @@ static void __init py_uart_setup(void) if (early_serial_setup(&up)) printk(KERN_ERR "Early serial init of port 0 failed\n"); +#endif /* CONFIG_SERIAL_8250 */ } static void __init py_rtc_setup(void) -- cgit v1.2.3 From 3e7f9b8254b82f7261b2c56ffaf864198c135ee5 Mon Sep 17 00:00:00 2001 From: Jan Altenberg Date: Thu, 25 Jan 2007 20:46:14 +0100 Subject: [MIPS] Fix some whitespace damage Signed-off-by: Jan Altenberg Signed-off-by: Ralf Baechle --- arch/mips/Kconfig.debug | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug index 5d6afb52d904..9351f1c04a9d 100644 --- a/arch/mips/Kconfig.debug +++ b/arch/mips/Kconfig.debug @@ -22,10 +22,10 @@ config CMDLINE string "Default kernel command string" default "" help - On some platforms, there is currently no way for the boot loader to - pass arguments to the kernel. For these platforms, you can supply - some command-line options at build time by entering them here. In - other cases you can specify kernel args so that you don't have + On some platforms, there is currently no way for the boot loader to + pass arguments to the kernel. For these platforms, you can supply + some command-line options at build time by entering them here. In + other cases you can specify kernel args so that you don't have to set them up in board prom initialization routines. config DEBUG_STACK_USAGE -- cgit v1.2.3 From 25b8ac3ba46ee3d586a9c00c1771dca58314714e Mon Sep 17 00:00:00 2001 From: "Ahmed S. Darwish" Date: Mon, 5 Feb 2007 04:42:11 +0200 Subject: [MIPS] Use ARRAY_SIZE macro when appropriate Signed-off-by: Ahmed S. Darwish Signed-off-by: Ralf Baechle --- arch/mips/arc/identify.c | 2 +- arch/mips/jmr3927/rbhma3100/setup.c | 2 +- arch/mips/mips-boards/atlas/atlas_int.c | 5 +++-- arch/mips/mips-boards/malta/malta_int.c | 5 +++-- arch/mips/pci/fixup-vr4133.c | 3 ++- 5 files changed, 10 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/mips/arc/identify.c b/arch/mips/arc/identify.c index 3ba7c47f9f23..4b907369b0f9 100644 --- a/arch/mips/arc/identify.c +++ b/arch/mips/arc/identify.c @@ -77,7 +77,7 @@ static struct smatch * __init string_to_mach(const char *s) { int i; - for (i = 0; i < (sizeof(mach_table) / sizeof (mach_table[0])); i++) { + for (i = 0; i < ARRAY_SIZE(mach_table); i++) { if (!strcmp(s, mach_table[i].arcname)) return &mach_table[i]; } diff --git a/arch/mips/jmr3927/rbhma3100/setup.c b/arch/mips/jmr3927/rbhma3100/setup.c index 138f25efe38a..7ca3d6d07b34 100644 --- a/arch/mips/jmr3927/rbhma3100/setup.c +++ b/arch/mips/jmr3927/rbhma3100/setup.c @@ -434,7 +434,7 @@ void __init tx3927_setup(void) /* DMA */ tx3927_dmaptr->mcr = 0; - for (i = 0; i < sizeof(tx3927_dmaptr->ch) / sizeof(tx3927_dmaptr->ch[0]); i++) { + for (i = 0; i < ARRAY_SIZE(tx3927_dmaptr->ch); i++) { /* reset channel */ tx3927_dmaptr->ch[i].ccr = TX3927_DMA_CCR_CHRST; tx3927_dmaptr->ch[i].ccr = 0; diff --git a/arch/mips/mips-boards/atlas/atlas_int.c b/arch/mips/mips-boards/atlas/atlas_int.c index 6cfcd8fedcce..dfa0acbd7fc2 100644 --- a/arch/mips/mips-boards/atlas/atlas_int.c +++ b/arch/mips/mips-boards/atlas/atlas_int.c @@ -32,6 +32,7 @@ #include #include #include +#include #include #include @@ -220,7 +221,7 @@ msc_irqmap_t __initdata msc_irqmap[] = { {MSC01C_INT_TMR, MSC01_IRQ_EDGE, 0}, {MSC01C_INT_PCI, MSC01_IRQ_LEVEL, 0}, }; -int __initdata msc_nr_irqs = sizeof(msc_irqmap) / sizeof(*msc_irqmap); +int __initdata msc_nr_irqs = ARRAY_SIZE(msc_irqmap); msc_irqmap_t __initdata msc_eicirqmap[] = { {MSC01E_INT_SW0, MSC01_IRQ_LEVEL, 0}, @@ -231,7 +232,7 @@ msc_irqmap_t __initdata msc_eicirqmap[] = { {MSC01E_INT_PERFCTR, MSC01_IRQ_LEVEL, 0}, {MSC01E_INT_CPUCTR, MSC01_IRQ_LEVEL, 0} }; -int __initdata msc_nr_eicirqs = sizeof(msc_eicirqmap) / sizeof(*msc_eicirqmap); +int __initdata msc_nr_eicirqs = ARRAY_SIZE(msc_eicirqmap); void __init arch_init_irq(void) { diff --git a/arch/mips/mips-boards/malta/malta_int.c b/arch/mips/mips-boards/malta/malta_int.c index d9ddb170e595..3c206bb17160 100644 --- a/arch/mips/mips-boards/malta/malta_int.c +++ b/arch/mips/mips-boards/malta/malta_int.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include @@ -289,7 +290,7 @@ msc_irqmap_t __initdata msc_irqmap[] = { {MSC01C_INT_TMR, MSC01_IRQ_EDGE, 0}, {MSC01C_INT_PCI, MSC01_IRQ_LEVEL, 0}, }; -int __initdata msc_nr_irqs = sizeof(msc_irqmap)/sizeof(msc_irqmap_t); +int __initdata msc_nr_irqs = ARRAY_SIZE(msc_irqmap); msc_irqmap_t __initdata msc_eicirqmap[] = { {MSC01E_INT_SW0, MSC01_IRQ_LEVEL, 0}, @@ -303,7 +304,7 @@ msc_irqmap_t __initdata msc_eicirqmap[] = { {MSC01E_INT_PERFCTR, MSC01_IRQ_LEVEL, 0}, {MSC01E_INT_CPUCTR, MSC01_IRQ_LEVEL, 0} }; -int __initdata msc_nr_eicirqs = sizeof(msc_eicirqmap)/sizeof(msc_irqmap_t); +int __initdata msc_nr_eicirqs = ARRAY_SIZE(msc_eicirqmap); void __init arch_init_irq(void) { diff --git a/arch/mips/pci/fixup-vr4133.c b/arch/mips/pci/fixup-vr4133.c index b1a5b318f26f..a8d9d22b13df 100644 --- a/arch/mips/pci/fixup-vr4133.c +++ b/arch/mips/pci/fixup-vr4133.c @@ -17,6 +17,7 @@ */ #include #include +#include #include #include @@ -143,7 +144,7 @@ int rockhopper_get_irq(struct pci_dev *dev, u8 pin, u8 slot) if (bus == NULL) return -1; - for (i = 0; i < sizeof (int_map) / sizeof (int_map[0]); i++) { + for (i = 0; i < ARRAY_SIZE(int_map); i++) { if (int_map[i].bus == bus->number && int_map[i].slot == slot) { int line; for (line = 0; line < 4; line++) -- cgit v1.2.3 From 722b05a0c1498ef12972bbd5084eded498d75fb4 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 7 Nov 2006 10:22:31 +0000 Subject: [MIPS] Alchemy: Fix bunch more warnings. Signed-off-by: Ralf Baechle --- arch/mips/au1000/common/setup.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/mips/au1000/common/setup.c b/arch/mips/au1000/common/setup.c index 919172db560c..13fe187f35d6 100644 --- a/arch/mips/au1000/common/setup.c +++ b/arch/mips/au1000/common/setup.c @@ -141,17 +141,20 @@ void __init plat_mem_setup(void) /* This routine should be valid for all Au1x based boards */ phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size) { - u32 start, end; - /* Don't fixup 36 bit addresses */ - if ((phys_addr >> 32) != 0) return phys_addr; + if ((phys_addr >> 32) != 0) + return phys_addr; #ifdef CONFIG_PCI - start = (u32)Au1500_PCI_MEM_START; - end = (u32)Au1500_PCI_MEM_END; - /* check for pci memory window */ - if ((phys_addr >= start) && ((phys_addr + size) < end)) { - return (phys_t)((phys_addr - start) + Au1500_PCI_MEM_START); + { + u32 start, end; + + start = (u32)Au1500_PCI_MEM_START; + end = (u32)Au1500_PCI_MEM_END; + /* check for pci memory window */ + if ((phys_addr >= start) && ((phys_addr + size) < end)) + return (phys_t) + ((phys_addr - start) + Au1500_PCI_MEM_START); } #endif -- cgit v1.2.3 From e0daad449c5195fa4552c60392eeee4e5c58d31c Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 5 Feb 2007 00:10:11 +0000 Subject: [MIPS] Whitespace cleanups. Signed-off-by: Ralf Baechle --- arch/mips/kernel/cpu-probe.c | 2 +- arch/mips/kernel/gdb-stub.c | 6 +++--- arch/mips/kernel/i8259.c | 4 ++-- arch/mips/kernel/irq-mv6434x.c | 12 ++++++------ arch/mips/kernel/linux32.c | 28 ++++++++++++++-------------- arch/mips/kernel/proc.c | 8 ++++---- arch/mips/kernel/setup.c | 4 ++-- arch/mips/kernel/signal.c | 6 +++--- arch/mips/kernel/signal_n32.c | 4 ++-- arch/mips/kernel/smtc.c | 2 +- arch/mips/kernel/sysirix.c | 4 ++-- arch/mips/kernel/vpe.c | 32 ++++++++++++++++---------------- 12 files changed, 56 insertions(+), 56 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index 442839e9578c..f59ef271d247 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -565,7 +565,7 @@ static inline unsigned int decode_config3(struct cpuinfo_mips *c) if (config3 & MIPS_CONF3_VEIC) c->options |= MIPS_CPU_VEIC; if (config3 & MIPS_CONF3_MT) - c->ases |= MIPS_ASE_MIPSMT; + c->ases |= MIPS_ASE_MIPSMT; return config3 & MIPS_CONF_M; } diff --git a/arch/mips/kernel/gdb-stub.c b/arch/mips/kernel/gdb-stub.c index 719d26968cb2..7bc882049269 100644 --- a/arch/mips/kernel/gdb-stub.c +++ b/arch/mips/kernel/gdb-stub.c @@ -505,13 +505,13 @@ void show_gdbregs(struct gdb_regs * regs) */ printk("$0 : %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n", regs->reg0, regs->reg1, regs->reg2, regs->reg3, - regs->reg4, regs->reg5, regs->reg6, regs->reg7); + regs->reg4, regs->reg5, regs->reg6, regs->reg7); printk("$8 : %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n", regs->reg8, regs->reg9, regs->reg10, regs->reg11, - regs->reg12, regs->reg13, regs->reg14, regs->reg15); + regs->reg12, regs->reg13, regs->reg14, regs->reg15); printk("$16: %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n", regs->reg16, regs->reg17, regs->reg18, regs->reg19, - regs->reg20, regs->reg21, regs->reg22, regs->reg23); + regs->reg20, regs->reg21, regs->reg22, regs->reg23); printk("$24: %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n", regs->reg24, regs->reg25, regs->reg26, regs->reg27, regs->reg28, regs->reg29, regs->reg30, regs->reg31); diff --git a/arch/mips/kernel/i8259.c b/arch/mips/kernel/i8259.c index 91de4223d638..b33ba6cd7f5b 100644 --- a/arch/mips/kernel/i8259.c +++ b/arch/mips/kernel/i8259.c @@ -177,8 +177,8 @@ handle_real_irq: outb(0x60+irq,PIC_MASTER_CMD); /* 'Specific EOI to master */ } #ifdef CONFIG_MIPS_MT_SMTC - if (irq_hwmask[irq] & ST0_IM) - set_c0_status(irq_hwmask[irq] & ST0_IM); + if (irq_hwmask[irq] & ST0_IM) + set_c0_status(irq_hwmask[irq] & ST0_IM); #endif /* CONFIG_MIPS_MT_SMTC */ spin_unlock_irqrestore(&i8259A_lock, flags); return; diff --git a/arch/mips/kernel/irq-mv6434x.c b/arch/mips/kernel/irq-mv6434x.c index bf6015ede00d..3dd561832e4c 100644 --- a/arch/mips/kernel/irq-mv6434x.c +++ b/arch/mips/kernel/irq-mv6434x.c @@ -23,13 +23,13 @@ static unsigned int irq_base; static inline int ls1bit32(unsigned int x) { - int b = 31, s; + int b = 31, s; - s = 16; if (x << 16 == 0) s = 0; b -= s; x <<= s; - s = 8; if (x << 8 == 0) s = 0; b -= s; x <<= s; - s = 4; if (x << 4 == 0) s = 0; b -= s; x <<= s; - s = 2; if (x << 2 == 0) s = 0; b -= s; x <<= s; - s = 1; if (x << 1 == 0) s = 0; b -= s; + s = 16; if (x << 16 == 0) s = 0; b -= s; x <<= s; + s = 8; if (x << 8 == 0) s = 0; b -= s; x <<= s; + s = 4; if (x << 4 == 0) s = 0; b -= s; x <<= s; + s = 2; if (x << 2 == 0) s = 0; b -= s; x <<= s; + s = 1; if (x << 1 == 0) s = 0; b -= s; return b; } diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c index de3fae260ff8..0b8ce59429a8 100644 --- a/arch/mips/kernel/linux32.c +++ b/arch/mips/kernel/linux32.c @@ -194,15 +194,15 @@ sysn32_waitid(int which, compat_pid_t pid, } struct sysinfo32 { - s32 uptime; - u32 loads[3]; - u32 totalram; - u32 freeram; - u32 sharedram; - u32 bufferram; - u32 totalswap; - u32 freeswap; - u16 procs; + s32 uptime; + u32 loads[3]; + u32 totalram; + u32 freeram; + u32 sharedram; + u32 bufferram; + u32 totalswap; + u32 freeswap; + u16 procs; u32 totalhigh; u32 freehigh; u32 mem_unit; @@ -558,7 +558,7 @@ extern asmlinkage long sys_ustat(dev_t dev, struct ustat __user * ubuf); asmlinkage int sys32_ustat(dev_t dev, struct ustat32 __user * ubuf32) { int err; - struct ustat tmp; + struct ustat tmp; struct ustat32 tmp32; mm_segment_t old_fs = get_fs(); @@ -569,11 +569,11 @@ asmlinkage int sys32_ustat(dev_t dev, struct ustat32 __user * ubuf32) if (err) goto out; - memset(&tmp32,0,sizeof(struct ustat32)); - tmp32.f_tfree = tmp.f_tfree; - tmp32.f_tinode = tmp.f_tinode; + memset(&tmp32,0,sizeof(struct ustat32)); + tmp32.f_tfree = tmp.f_tfree; + tmp32.f_tinode = tmp.f_tinode; - err = copy_to_user(ubuf32,&tmp32,sizeof(struct ustat32)) ? -EFAULT : 0; + err = copy_to_user(ubuf32,&tmp32,sizeof(struct ustat32)) ? -EFAULT : 0; out: return err; diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c index 4ed37ba19731..5ddc2e9deecf 100644 --- a/arch/mips/kernel/proc.c +++ b/arch/mips/kernel/proc.c @@ -31,13 +31,13 @@ static const char *cpu_name[] = { [CPU_R4000PC] = "R4000PC", [CPU_R4000SC] = "R4000SC", [CPU_R4000MC] = "R4000MC", - [CPU_R4200] = "R4200", + [CPU_R4200] = "R4200", [CPU_R4400PC] = "R4400PC", [CPU_R4400SC] = "R4400SC", [CPU_R4400MC] = "R4400MC", [CPU_R4600] = "R4600", [CPU_R6000] = "R6000", - [CPU_R6000A] = "R6000A", + [CPU_R6000A] = "R6000A", [CPU_R8000] = "R8000", [CPU_R10000] = "R10000", [CPU_R12000] = "R12000", @@ -46,14 +46,14 @@ static const char *cpu_name[] = { [CPU_R4650] = "R4650", [CPU_R4700] = "R4700", [CPU_R5000] = "R5000", - [CPU_R5000A] = "R5000A", + [CPU_R5000A] = "R5000A", [CPU_R4640] = "R4640", [CPU_NEVADA] = "Nevada", [CPU_RM7000] = "RM7000", [CPU_RM9000] = "RM9000", [CPU_R5432] = "R5432", [CPU_4KC] = "MIPS 4Kc", - [CPU_5KC] = "MIPS 5Kc", + [CPU_5KC] = "MIPS 5Kc", [CPU_R4310] = "R4310", [CPU_SB1] = "SiByte SB1", [CPU_SB1A] = "SiByte SB1A", diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index c4359791bd5c..d2e01e7167b8 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -529,9 +529,9 @@ void __init setup_arch(char **cmdline_p) #if defined(CONFIG_VT) #if defined(CONFIG_VGA_CONSOLE) - conswitchp = &vga_con; + conswitchp = &vga_con; #elif defined(CONFIG_DUMMY_CONSOLE) - conswitchp = &dummy_con; + conswitchp = &dummy_con; #endif #endif diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c index b9d358e05214..9a44053cd9f1 100644 --- a/arch/mips/kernel/signal.c +++ b/arch/mips/kernel/signal.c @@ -89,7 +89,7 @@ _sys_rt_sigsuspend(nabi_no_regargs struct pt_regs regs) spin_lock_irq(¤t->sighand->siglock); current->saved_sigmask = current->blocked; current->blocked = newset; - recalc_sigpending(); + recalc_sigpending(); spin_unlock_irq(¤t->sighand->siglock); current->state = TASK_INTERRUPTIBLE; @@ -124,7 +124,7 @@ asmlinkage int sys_sigaction(int sig, const struct sigaction __user *act, if (!ret && oact) { if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact))) - return -EFAULT; + return -EFAULT; err |= __put_user(old_ka.sa.sa_flags, &oact->sa_flags); err |= __put_user(old_ka.sa.sa_handler, &oact->sa_handler); err |= __put_user(old_ka.sa.sa_mask.sig[0], oact->sa_mask.sig); @@ -304,7 +304,7 @@ int setup_frame(struct k_sigaction * ka, struct pt_regs *regs, current->comm, current->pid, frame, regs->cp0_epc, frame->regs[31]); #endif - return 0; + return 0; give_sigsegv: force_sigsegv(signr, current); diff --git a/arch/mips/kernel/signal_n32.c b/arch/mips/kernel/signal_n32.c index a67c18555ed3..b28646b3ceae 100644 --- a/arch/mips/kernel/signal_n32.c +++ b/arch/mips/kernel/signal_n32.c @@ -105,7 +105,7 @@ _sysn32_rt_sigsuspend(nabi_no_regargs struct pt_regs regs) spin_lock_irq(¤t->sighand->siglock); current->saved_sigmask = current->blocked; current->blocked = newset; - recalc_sigpending(); + recalc_sigpending(); spin_unlock_irq(¤t->sighand->siglock); current->state = TASK_INTERRUPTIBLE; @@ -184,7 +184,7 @@ int setup_rt_frame_n32(struct k_sigaction * ka, /* Create the ucontext. */ err |= __put_user(0, &frame->rs_uc.uc_flags); err |= __put_user(0, &frame->rs_uc.uc_link); - sp = (int) (long) current->sas_ss_sp; + sp = (int) (long) current->sas_ss_sp; err |= __put_user(sp, &frame->rs_uc.uc_stack.ss_sp); err |= __put_user(sas_ss_flags(regs->regs[29]), diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c index 19c58fcd088c..1475de8e79bf 100644 --- a/arch/mips/kernel/smtc.c +++ b/arch/mips/kernel/smtc.c @@ -1159,7 +1159,7 @@ void smtc_get_new_mmu_context(struct mm_struct *mm, unsigned long cpu) * It would be nice to be able to use a spinlock here, * but this is invoked from within TLB flush routines * that protect themselves with DVPE, so if a lock is - * held by another TC, it'll never be freed. + * held by another TC, it'll never be freed. * * DVPE/DMT must not be done with interrupts enabled, * so even so most callers will already have disabled diff --git a/arch/mips/kernel/sysirix.c b/arch/mips/kernel/sysirix.c index 6c2406a93f2b..93a148486f88 100644 --- a/arch/mips/kernel/sysirix.c +++ b/arch/mips/kernel/sysirix.c @@ -669,7 +669,7 @@ asmlinkage int irix_mount(char __user *dev_name, char __user *dir_name, struct irix_statfs { short f_type; - long f_bsize, f_frsize, f_blocks, f_bfree, f_files, f_ffree; + long f_bsize, f_frsize, f_blocks, f_bfree, f_files, f_ffree; char f_fname[6], f_fpack[6]; }; @@ -959,7 +959,7 @@ static inline loff_t llseek(struct file *file, loff_t offset, int origin) fn = default_llseek; if (file->f_op && file->f_op->llseek) - fn = file->f_op->llseek; + fn = file->f_op->llseek; lock_kernel(); retval = fn(file, offset, origin); unlock_kernel(); diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c index f31b15a56a4f..459624969c99 100644 --- a/arch/mips/kernel/vpe.c +++ b/arch/mips/kernel/vpe.c @@ -522,7 +522,7 @@ static int (*reloc_handlers[]) (struct module *me, uint32_t *location, }; static char *rstrs[] = { - [R_MIPS_NONE] = "MIPS_NONE", + [R_MIPS_NONE] = "MIPS_NONE", [R_MIPS_32] = "MIPS_32", [R_MIPS_26] = "MIPS_26", [R_MIPS_HI16] = "MIPS_HI16", @@ -713,16 +713,16 @@ static int vpe_run(struct vpe * v) dvpe(); if (!list_empty(&v->tc)) { - if ((t = list_entry(v->tc.next, struct tc, tc)) == NULL) { - printk(KERN_WARNING "VPE loader: TC %d is already in use.\n", - t->index); - return -ENOEXEC; - } - } else { - printk(KERN_WARNING "VPE loader: No TC's associated with VPE %d\n", - v->minor); - return -ENOEXEC; - } + if ((t = list_entry(v->tc.next, struct tc, tc)) == NULL) { + printk(KERN_WARNING "VPE loader: TC %d is already in use.\n", + t->index); + return -ENOEXEC; + } + } else { + printk(KERN_WARNING "VPE loader: No TC's associated with VPE %d\n", + v->minor); + return -ENOEXEC; + } /* Put MVPE's into 'configuration state' */ set_c0_mvpcontrol(MVPCONTROL_VPC); @@ -775,14 +775,14 @@ static int vpe_run(struct vpe * v) back_to_back_c0_hazard(); - /* Set up the XTC bit in vpeconf0 to point at our tc */ - write_vpe_c0_vpeconf0( (read_vpe_c0_vpeconf0() & ~(VPECONF0_XTC)) - | (t->index << VPECONF0_XTC_SHIFT)); + /* Set up the XTC bit in vpeconf0 to point at our tc */ + write_vpe_c0_vpeconf0( (read_vpe_c0_vpeconf0() & ~(VPECONF0_XTC)) + | (t->index << VPECONF0_XTC_SHIFT)); back_to_back_c0_hazard(); - /* enable this VPE */ - write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA); + /* enable this VPE */ + write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA); /* clear out any left overs from a previous program */ write_vpe_c0_status(0); -- cgit v1.2.3 From 786d7cdd06581773ee7913560838d6f4487d2d9f Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 7 Nov 2006 09:58:30 +0000 Subject: [MIPS] Alchemy: Fix bunch of warnings MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit CC arch/mips/au1000/common/pci.o arch/mips/au1000/common/pci.c:42: warning: large integer implicitly truncated to unsigned type arch/mips/au1000/common/pci.c:43: warning: large integer implicitly truncated to unsigned type arch/mips/au1000/common/pci.c:49: warning: large integer implicitly truncated to unsigned type arch/mips/au1000/common/pci.c:50: warning: large integer implicitly truncated to unsigned type arch/mips/au1000/common/pci.c: In function ‘au1x_pci_setup’: arch/mips/au1000/common/pci.c:82: warning: ISO C90 forbids mixed declarations and code Signed-off-by: Ralf Baechle --- arch/mips/au1000/common/pci.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/mips/au1000/common/pci.c b/arch/mips/au1000/common/pci.c index 9f8ce08e173b..6c25e6c09f78 100644 --- a/arch/mips/au1000/common/pci.c +++ b/arch/mips/au1000/common/pci.c @@ -76,13 +76,17 @@ static int __init au1x_pci_setup(void) } #ifdef CONFIG_DMA_NONCOHERENT - /* - * Set the NC bit in controller for Au1500 pre-AC silicon - */ - u32 prid = read_c0_prid(); - if ( (prid & 0xFF000000) == 0x01000000 && prid < 0x01030202) { - au_writel( 1<<16 | au_readl(Au1500_PCI_CFG), Au1500_PCI_CFG); - printk("Non-coherent PCI accesses enabled\n"); + { + /* + * Set the NC bit in controller for Au1500 pre-AC silicon + */ + u32 prid = read_c0_prid(); + + if ((prid & 0xFF000000) == 0x01000000 && prid < 0x01030202) { + au_writel((1 << 16) | au_readl(Au1500_PCI_CFG), + Au1500_PCI_CFG); + printk("Non-coherent PCI accesses enabled\n"); + } } #endif -- cgit v1.2.3 From 3f21cdee412089ed7ea12c3650bfb4211cf0b1d0 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 7 Nov 2006 10:19:05 +0000 Subject: [MIPS] PB1100: Fix pile of warnings MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit CC arch/mips/au1000/pb1100/board_setup.o arch/mips/au1000/pb1100/board_setup.c: In function ‘board_setup’: arch/mips/au1000/pb1100/board_setup.c:104: warning: passing argument 1 of ‘readb’ makes pointer from integer without a cast arch/mips/au1000/pb1100/board_setup.c:105: warning: passing argument 1 of ‘readb’ makes pointer from integer without a cast arch/mips/au1000/pb1100/board_setup.c:105: warning: passing argument 2 of ‘writeb’ makes pointer from integer without a cast arch/mips/au1000/pb1100/board_setup.c:109: warning: passing argument 1 of ‘readb’ makes pointer from integer without a cast arch/mips/au1000/pb1100/board_setup.c:110: warning: passing argument 1 of ‘readb’ makes pointer from integer without a cast arch/mips/au1000/pb1100/board_setup.c:110: warning: passing argument 2 of ‘writeb’ makes pointer from integer without a cast arch/mips/au1000/pb1100/board_setup.c:51: warning: unused variable ‘sys_clksrc’ arch/mips/au1000/pb1100/board_setup.c:51: warning: unused variable ‘sys_freqctrl’ arch/mips/au1000/pb1100/board_setup.c:50: warning: unused variable ‘pin_func’ Signed-off-by: Ralf Baechle --- arch/mips/au1000/pb1100/board_setup.c | 93 ++++++++++++++++++----------------- 1 file changed, 48 insertions(+), 45 deletions(-) (limited to 'arch') diff --git a/arch/mips/au1000/pb1100/board_setup.c b/arch/mips/au1000/pb1100/board_setup.c index 2d1533f116c0..6bc1f8e1b608 100644 --- a/arch/mips/au1000/pb1100/board_setup.c +++ b/arch/mips/au1000/pb1100/board_setup.c @@ -47,8 +47,7 @@ void board_reset (void) void __init board_setup(void) { - u32 pin_func; - u32 sys_freqctrl, sys_clksrc; + volatile void __iomem * base = (volatile void __iomem *) 0xac000000UL; // set AUX clock to 12MHz * 8 = 96 MHz au_writel(8, SYS_AUXPLL); @@ -56,58 +55,62 @@ void __init board_setup(void) udelay(100); #ifdef CONFIG_USB_OHCI - // configure pins GPIO[14:9] as GPIO - pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x80); - - /* zero and disable FREQ2 */ - sys_freqctrl = au_readl(SYS_FREQCTRL0); - sys_freqctrl &= ~0xFFF00000; - au_writel(sys_freqctrl, SYS_FREQCTRL0); - - /* zero and disable USBH/USBD/IrDA clock */ - sys_clksrc = au_readl(SYS_CLKSRC); - sys_clksrc &= ~0x0000001F; - au_writel(sys_clksrc, SYS_CLKSRC); - - sys_freqctrl = au_readl(SYS_FREQCTRL0); - sys_freqctrl &= ~0xFFF00000; - - sys_clksrc = au_readl(SYS_CLKSRC); - sys_clksrc &= ~0x0000001F; - - // FREQ2 = aux/2 = 48 MHz - sys_freqctrl |= ((0<<22) | (1<<21) | (1<<20)); - au_writel(sys_freqctrl, SYS_FREQCTRL0); - - /* - * Route 48MHz FREQ2 into USBH/USBD/IrDA - */ - sys_clksrc |= ((4<<2) | (0<<1) | 0 ); - au_writel(sys_clksrc, SYS_CLKSRC); - - /* setup the static bus controller */ - au_writel(0x00000002, MEM_STCFG3); /* type = PCMCIA */ - au_writel(0x280E3D07, MEM_STTIME3); /* 250ns cycle time */ - au_writel(0x10000000, MEM_STADDR3); /* any PCMCIA select */ - - // get USB Functionality pin state (device vs host drive pins) - pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8000); - // 2nd USB port is USB host - pin_func |= 0x8000; - au_writel(pin_func, SYS_PINFUNC); + { + u32 pin_func, sys_freqctrl, sys_clksrc; + + // configure pins GPIO[14:9] as GPIO + pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x80); + + /* zero and disable FREQ2 */ + sys_freqctrl = au_readl(SYS_FREQCTRL0); + sys_freqctrl &= ~0xFFF00000; + au_writel(sys_freqctrl, SYS_FREQCTRL0); + + /* zero and disable USBH/USBD/IrDA clock */ + sys_clksrc = au_readl(SYS_CLKSRC); + sys_clksrc &= ~0x0000001F; + au_writel(sys_clksrc, SYS_CLKSRC); + + sys_freqctrl = au_readl(SYS_FREQCTRL0); + sys_freqctrl &= ~0xFFF00000; + + sys_clksrc = au_readl(SYS_CLKSRC); + sys_clksrc &= ~0x0000001F; + + // FREQ2 = aux/2 = 48 MHz + sys_freqctrl |= ((0<<22) | (1<<21) | (1<<20)); + au_writel(sys_freqctrl, SYS_FREQCTRL0); + + /* + * Route 48MHz FREQ2 into USBH/USBD/IrDA + */ + sys_clksrc |= ((4<<2) | (0<<1) | 0 ); + au_writel(sys_clksrc, SYS_CLKSRC); + + /* setup the static bus controller */ + au_writel(0x00000002, MEM_STCFG3); /* type = PCMCIA */ + au_writel(0x280E3D07, MEM_STTIME3); /* 250ns cycle time */ + au_writel(0x10000000, MEM_STADDR3); /* any PCMCIA select */ + + // get USB Functionality pin state (device vs host drive pins) + pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8000); + // 2nd USB port is USB host + pin_func |= 0x8000; + au_writel(pin_func, SYS_PINFUNC); + } #endif // defined (CONFIG_USB_OHCI) /* Enable sys bus clock divider when IDLE state or no bus activity. */ au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL); // Enable the RTC if not already enabled - if (!(readb(0xac000028) & 0x20)) { - writeb(readb(0xac000028) | 0x20, 0xac000028); + if (!(readb(base + 0x28) & 0x20)) { + writeb(readb(base + 0x28) | 0x20, base + 0x28); au_sync(); } // Put the clock in BCD mode - if (readb(0xac00002C) & 0x4) { /* reg B */ - writeb(readb(0xac00002c) & ~0x4, 0xac00002c); + if (readb(base + 0x2C) & 0x4) { /* reg B */ + writeb(readb(base + 0x2c) & ~0x4, base + 0x2c); au_sync(); } } -- cgit v1.2.3 From c9170617510059c750cb91207b08f35001571a22 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 5 Feb 2007 00:05:08 +0000 Subject: [MIPS] IRIX: Linux coding style cleanups. Signed-off-by: Ralf Baechle --- arch/mips/kernel/irixelf.c | 331 ++++++++++++++++++++++++--------------------- 1 file changed, 178 insertions(+), 153 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/irixelf.c b/arch/mips/kernel/irixelf.c index 37cad5de515c..3cc25c05d367 100644 --- a/arch/mips/kernel/irixelf.c +++ b/arch/mips/kernel/irixelf.c @@ -10,6 +10,8 @@ * Copyright (C) 1996 - 2004 David S. Miller * Copyright (C) 2004 - 2005 Steven J. Hill */ +#undef DEBUG + #include #include #include @@ -40,8 +42,6 @@ #include -#undef DEBUG - static int load_irix_binary(struct linux_binprm * bprm, struct pt_regs * regs); static int load_irix_library(struct file *); static int irix_core_dump(long signr, struct pt_regs * regs, @@ -52,72 +52,102 @@ static struct linux_binfmt irix_format = { irix_core_dump, PAGE_SIZE }; -#ifdef DEBUG /* Debugging routines. */ static char *get_elf_p_type(Elf32_Word p_type) { - int i = (int) p_type; - - switch(i) { - case PT_NULL: return("PT_NULL"); break; - case PT_LOAD: return("PT_LOAD"); break; - case PT_DYNAMIC: return("PT_DYNAMIC"); break; - case PT_INTERP: return("PT_INTERP"); break; - case PT_NOTE: return("PT_NOTE"); break; - case PT_SHLIB: return("PT_SHLIB"); break; - case PT_PHDR: return("PT_PHDR"); break; - case PT_LOPROC: return("PT_LOPROC/REGINFO"); break; - case PT_HIPROC: return("PT_HIPROC"); break; - default: return("PT_BOGUS"); break; +#ifdef DEBUG + switch (p_type) { + case PT_NULL: + return "PT_NULL"; + break; + + case PT_LOAD: + return "PT_LOAD"; + break; + + case PT_DYNAMIC: + return "PT_DYNAMIC"; + break; + + case PT_INTERP: + return "PT_INTERP"; + break; + + case PT_NOTE: + return "PT_NOTE"; + break; + + case PT_SHLIB: + return "PT_SHLIB"; + break; + + case PT_PHDR: + return "PT_PHDR"; + break; + + case PT_LOPROC: + return "PT_LOPROC/REGINFO"; + break; + + case PT_HIPROC: + return "PT_HIPROC"; + break; + + default: + return "PT_BOGUS"; + break; } +#endif } static void print_elfhdr(struct elfhdr *ehp) { int i; - printk("ELFHDR: e_ident<"); - for(i = 0; i < (EI_NIDENT - 1); i++) printk("%x ", ehp->e_ident[i]); - printk("%x>\n", ehp->e_ident[i]); - printk(" e_type[%04x] e_machine[%04x] e_version[%08lx]\n", - (unsigned short) ehp->e_type, (unsigned short) ehp->e_machine, - (unsigned long) ehp->e_version); - printk(" e_entry[%08lx] e_phoff[%08lx] e_shoff[%08lx] " - "e_flags[%08lx]\n", - (unsigned long) ehp->e_entry, (unsigned long) ehp->e_phoff, - (unsigned long) ehp->e_shoff, (unsigned long) ehp->e_flags); - printk(" e_ehsize[%04x] e_phentsize[%04x] e_phnum[%04x]\n", - (unsigned short) ehp->e_ehsize, (unsigned short) ehp->e_phentsize, - (unsigned short) ehp->e_phnum); - printk(" e_shentsize[%04x] e_shnum[%04x] e_shstrndx[%04x]\n", - (unsigned short) ehp->e_shentsize, (unsigned short) ehp->e_shnum, - (unsigned short) ehp->e_shstrndx); + pr_debug("ELFHDR: e_ident<"); + for (i = 0; i < (EI_NIDENT - 1); i++) + pr_debug("%x ", ehp->e_ident[i]); + pr_debug("%x>\n", ehp->e_ident[i]); + pr_debug(" e_type[%04x] e_machine[%04x] e_version[%08lx]\n", + (unsigned short) ehp->e_type, (unsigned short) ehp->e_machine, + (unsigned long) ehp->e_version); + pr_debug(" e_entry[%08lx] e_phoff[%08lx] e_shoff[%08lx] " + "e_flags[%08lx]\n", + (unsigned long) ehp->e_entry, (unsigned long) ehp->e_phoff, + (unsigned long) ehp->e_shoff, (unsigned long) ehp->e_flags); + pr_debug(" e_ehsize[%04x] e_phentsize[%04x] e_phnum[%04x]\n", + (unsigned short) ehp->e_ehsize, + (unsigned short) ehp->e_phentsize, + (unsigned short) ehp->e_phnum); + pr_debug(" e_shentsize[%04x] e_shnum[%04x] e_shstrndx[%04x]\n", + (unsigned short) ehp->e_shentsize, + (unsigned short) ehp->e_shnum, + (unsigned short) ehp->e_shstrndx); } static void print_phdr(int i, struct elf_phdr *ep) { - printk("PHDR[%d]: p_type[%s] p_offset[%08lx] p_vaddr[%08lx] " - "p_paddr[%08lx]\n", i, get_elf_p_type(ep->p_type), - (unsigned long) ep->p_offset, (unsigned long) ep->p_vaddr, - (unsigned long) ep->p_paddr); - printk(" p_filesz[%08lx] p_memsz[%08lx] p_flags[%08lx] " - "p_align[%08lx]\n", (unsigned long) ep->p_filesz, - (unsigned long) ep->p_memsz, (unsigned long) ep->p_flags, - (unsigned long) ep->p_align); + pr_debug("PHDR[%d]: p_type[%s] p_offset[%08lx] p_vaddr[%08lx] " + "p_paddr[%08lx]\n", i, get_elf_p_type(ep->p_type), + (unsigned long) ep->p_offset, (unsigned long) ep->p_vaddr, + (unsigned long) ep->p_paddr); + pr_debug(" p_filesz[%08lx] p_memsz[%08lx] p_flags[%08lx] " + "p_align[%08lx]\n", (unsigned long) ep->p_filesz, + (unsigned long) ep->p_memsz, (unsigned long) ep->p_flags, + (unsigned long) ep->p_align); } static void dump_phdrs(struct elf_phdr *ep, int pnum) { int i; - for(i = 0; i < pnum; i++, ep++) { - if((ep->p_type == PT_LOAD) || - (ep->p_type == PT_INTERP) || - (ep->p_type == PT_PHDR)) + for (i = 0; i < pnum; i++, ep++) { + if ((ep->p_type == PT_LOAD) || + (ep->p_type == PT_INTERP) || + (ep->p_type == PT_PHDR)) print_phdr(i, ep); } } -#endif /* DEBUG */ static void set_brk(unsigned long start, unsigned long end) { @@ -156,11 +186,10 @@ static unsigned long * create_irix_tables(char * p, int argc, int envc, elf_addr_t *envp; elf_addr_t *sp, *csp; -#ifdef DEBUG - printk("create_irix_tables: p[%p] argc[%d] envc[%d] " - "load_addr[%08x] interp_load_addr[%08x]\n", - p, argc, envc, load_addr, interp_load_addr); -#endif + pr_debug("create_irix_tables: p[%p] argc[%d] envc[%d] " + "load_addr[%08x] interp_load_addr[%08x]\n", + p, argc, envc, load_addr, interp_load_addr); + sp = (elf_addr_t *) (~15UL & (unsigned long) p); csp = sp; csp -= exec ? DLINFO_ITEMS*2 : 2; @@ -181,7 +210,7 @@ static unsigned long * create_irix_tables(char * p, int argc, int envc, sp -= 2; NEW_AUX_ENT(0, AT_NULL, 0); - if(exec) { + if (exec) { sp -= 11*2; NEW_AUX_ENT (0, AT_PHDR, load_addr + exec->e_phoff); @@ -245,9 +274,7 @@ static unsigned int load_irix_interp(struct elfhdr * interp_elf_ex, last_bss = 0; error = load_addr = 0; -#ifdef DEBUG print_elfhdr(interp_elf_ex); -#endif /* First of all, some simple consistency checks */ if ((interp_elf_ex->e_type != ET_EXEC && @@ -258,7 +285,7 @@ static unsigned int load_irix_interp(struct elfhdr * interp_elf_ex, } /* Now read in all of the header information */ - if(sizeof(struct elf_phdr) * interp_elf_ex->e_phnum > PAGE_SIZE) { + if (sizeof(struct elf_phdr) * interp_elf_ex->e_phnum > PAGE_SIZE) { printk("IRIX interp header bigger than a page (%d)\n", (sizeof(struct elf_phdr) * interp_elf_ex->e_phnum)); return 0xffffffff; @@ -267,15 +294,15 @@ static unsigned int load_irix_interp(struct elfhdr * interp_elf_ex, elf_phdata = kmalloc(sizeof(struct elf_phdr) * interp_elf_ex->e_phnum, GFP_KERNEL); - if(!elf_phdata) { - printk("Cannot kmalloc phdata for IRIX interp.\n"); - return 0xffffffff; + if (!elf_phdata) { + printk("Cannot kmalloc phdata for IRIX interp.\n"); + return 0xffffffff; } /* If the size of this structure has changed, then punt, since * we will be doing the wrong thing. */ - if(interp_elf_ex->e_phentsize != 32) { + if (interp_elf_ex->e_phentsize != 32) { printk("IRIX interp e_phentsize == %d != 32 ", interp_elf_ex->e_phentsize); kfree(elf_phdata); @@ -286,61 +313,71 @@ static unsigned int load_irix_interp(struct elfhdr * interp_elf_ex, (char *) elf_phdata, sizeof(struct elf_phdr) * interp_elf_ex->e_phnum); -#ifdef DEBUG dump_phdrs(elf_phdata, interp_elf_ex->e_phnum); -#endif eppnt = elf_phdata; - for(i=0; ie_phnum; i++, eppnt++) { - if(eppnt->p_type == PT_LOAD) { - int elf_type = MAP_PRIVATE | MAP_DENYWRITE; - int elf_prot = 0; - unsigned long vaddr = 0; - if (eppnt->p_flags & PF_R) elf_prot = PROT_READ; - if (eppnt->p_flags & PF_W) elf_prot |= PROT_WRITE; - if (eppnt->p_flags & PF_X) elf_prot |= PROT_EXEC; - elf_type |= MAP_FIXED; - vaddr = eppnt->p_vaddr; - - pr_debug("INTERP do_mmap(%p, %08lx, %08lx, %08lx, %08lx, %08lx) ", - interpreter, vaddr, - (unsigned long) (eppnt->p_filesz + (eppnt->p_vaddr & 0xfff)), - (unsigned long) elf_prot, (unsigned long) elf_type, - (unsigned long) (eppnt->p_offset & 0xfffff000)); - down_write(¤t->mm->mmap_sem); - error = do_mmap(interpreter, vaddr, - eppnt->p_filesz + (eppnt->p_vaddr & 0xfff), - elf_prot, elf_type, - eppnt->p_offset & 0xfffff000); - up_write(¤t->mm->mmap_sem); - - if(error < 0 && error > -1024) { - printk("Aieee IRIX interp mmap error=%d\n", error); - break; /* Real error */ - } - pr_debug("error=%08lx ", (unsigned long) error); - if(!load_addr && interp_elf_ex->e_type == ET_DYN) { - load_addr = error; - pr_debug("load_addr = error "); - } - - /* Find the end of the file mapping for this phdr, and keep - * track of the largest address we see for this. - */ - k = eppnt->p_vaddr + eppnt->p_filesz; - if(k > elf_bss) elf_bss = k; - - /* Do the same thing for the memory mapping - between - * elf_bss and last_bss is the bss section. - */ - k = eppnt->p_memsz + eppnt->p_vaddr; - if(k > last_bss) last_bss = k; - pr_debug("\n"); - } + for (i = 0; i < interp_elf_ex->e_phnum; i++, eppnt++) { + if (eppnt->p_type == PT_LOAD) { + int elf_type = MAP_PRIVATE | MAP_DENYWRITE; + int elf_prot = 0; + unsigned long vaddr = 0; + if (eppnt->p_flags & PF_R) + elf_prot = PROT_READ; + if (eppnt->p_flags & PF_W) + elf_prot |= PROT_WRITE; + if (eppnt->p_flags & PF_X) + elf_prot |= PROT_EXEC; + elf_type |= MAP_FIXED; + vaddr = eppnt->p_vaddr; + + pr_debug("INTERP do_mmap" + "(%p, %08lx, %08lx, %08lx, %08lx, %08lx) ", + interpreter, vaddr, + (unsigned long) + (eppnt->p_filesz + (eppnt->p_vaddr & 0xfff)), + (unsigned long) + elf_prot, (unsigned long) elf_type, + (unsigned long) + (eppnt->p_offset & 0xfffff000)); + + down_write(¤t->mm->mmap_sem); + error = do_mmap(interpreter, vaddr, + eppnt->p_filesz + (eppnt->p_vaddr & 0xfff), + elf_prot, elf_type, + eppnt->p_offset & 0xfffff000); + up_write(¤t->mm->mmap_sem); + + if (error < 0 && error > -1024) { + printk("Aieee IRIX interp mmap error=%d\n", + error); + break; /* Real error */ + } + pr_debug("error=%08lx ", (unsigned long) error); + if (!load_addr && interp_elf_ex->e_type == ET_DYN) { + load_addr = error; + pr_debug("load_addr = error "); + } + + /* + * Find the end of the file mapping for this phdr, and + * keep track of the largest address we see for this. + */ + k = eppnt->p_vaddr + eppnt->p_filesz; + if (k > elf_bss) + elf_bss = k; + + /* Do the same thing for the memory mapping - between + * elf_bss and last_bss is the bss section. + */ + k = eppnt->p_memsz + eppnt->p_vaddr; + if (k > last_bss) + last_bss = k; + pr_debug("\n"); + } } /* Now use mmap to map the library into memory. */ - if(error < 0 && error > -1024) { + if (error < 0 && error > -1024) { pr_debug("got error %d\n", error); kfree(elf_phdata); return 0xffffffff; @@ -377,7 +414,7 @@ static int verify_binary(struct elfhdr *ehp, struct linux_binprm *bprm) return -ENOEXEC; /* First of all, some simple consistency checks */ - if((ehp->e_type != ET_EXEC && ehp->e_type != ET_DYN) || + if ((ehp->e_type != ET_EXEC && ehp->e_type != ET_DYN) || !bprm->file->f_op->mmap) { return -ENOEXEC; } @@ -388,7 +425,7 @@ static int verify_binary(struct elfhdr *ehp, struct linux_binprm *bprm) * XXX all registers as 64bits on cpu's capable of this at * XXX exception time plus frob the XTLB exception vector. */ - if((ehp->e_flags & EF_MIPS_ABI2)) + if ((ehp->e_flags & EF_MIPS_ABI2)) return -ENOEXEC; return 0; @@ -410,7 +447,7 @@ static inline int look_for_irix_interpreter(char **name, struct file *file = NULL; *name = NULL; - for(i = 0; i < pnum; i++, epp++) { + for (i = 0; i < pnum; i++, epp++) { if (epp->p_type != PT_INTERP) continue; @@ -467,8 +504,8 @@ static inline void map_executable(struct file *fp, struct elf_phdr *epp, int pnu unsigned int tmp; int i, prot; - for(i = 0; i < pnum; i++, epp++) { - if(epp->p_type != PT_LOAD) + for (i = 0; i < pnum; i++, epp++) { + if (epp->p_type != PT_LOAD) continue; /* Map it. */ @@ -483,23 +520,23 @@ static inline void map_executable(struct file *fp, struct elf_phdr *epp, int pnu up_write(¤t->mm->mmap_sem); /* Fixup location tracking vars. */ - if((epp->p_vaddr & 0xfffff000) < *estack) + if ((epp->p_vaddr & 0xfffff000) < *estack) *estack = (epp->p_vaddr & 0xfffff000); - if(!*laddr) + if (!*laddr) *laddr = epp->p_vaddr - epp->p_offset; - if(epp->p_vaddr < *scode) + if (epp->p_vaddr < *scode) *scode = epp->p_vaddr; tmp = epp->p_vaddr + epp->p_filesz; - if(tmp > *ebss) + if (tmp > *ebss) *ebss = tmp; - if((epp->p_flags & PF_X) && *ecode < tmp) + if ((epp->p_flags & PF_X) && *ecode < tmp) *ecode = tmp; - if(*edata < tmp) + if (*edata < tmp) *edata = tmp; tmp = epp->p_vaddr + epp->p_memsz; - if(tmp > *ebrk) + if (tmp > *ebrk) *ebrk = tmp; } @@ -513,12 +550,12 @@ static inline int map_interpreter(struct elf_phdr *epp, struct elfhdr *ihp, int i; *eentry = 0xffffffff; - for(i = 0; i < pnum; i++, epp++) { - if(epp->p_type != PT_INTERP) + for (i = 0; i < pnum; i++, epp++) { + if (epp->p_type != PT_INTERP) continue; /* We should have fielded this error elsewhere... */ - if(*eentry != 0xffffffff) + if (*eentry != 0xffffffff) return -1; set_fs(old_fs); @@ -604,9 +641,7 @@ static int load_irix_binary(struct linux_binprm * bprm, struct pt_regs * regs) if (elf_ex.e_shnum > 20) goto out; -#ifdef DEBUG print_elfhdr(&elf_ex); -#endif /* Now read in all of the header information */ size = elf_ex.e_phentsize * elf_ex.e_phnum; @@ -622,13 +657,11 @@ static int load_irix_binary(struct linux_binprm * bprm, struct pt_regs * regs) if (retval < 0) goto out_free_ph; -#ifdef DEBUG dump_phdrs(elf_phdata, elf_ex.e_phnum); -#endif /* Set some things for later. */ - for(i = 0; i < elf_ex.e_phnum; i++) { - switch(elf_phdata[i].p_type) { + for (i = 0; i < elf_ex.e_phnum; i++) { + switch (elf_phdata[i].p_type) { case PT_INTERP: has_interp = 1; elf_ihdr = &elf_phdata[i]; @@ -667,7 +700,7 @@ static int load_irix_binary(struct linux_binprm * bprm, struct pt_regs * regs) if (elf_interpreter) { retval = verify_irix_interpreter(&interp_elf_ex); - if(retval) + if (retval) goto out_free_interp; } @@ -706,12 +739,12 @@ static int load_irix_binary(struct linux_binprm * bprm, struct pt_regs * regs) &load_addr, &start_code, &elf_bss, &end_code, &end_data, &elf_brk); - if(elf_interpreter) { + if (elf_interpreter) { retval = map_interpreter(elf_phdata, &interp_elf_ex, interpreter, &interp_load_addr, elf_ex.e_phnum, old_fs, &elf_entry); kfree(elf_interpreter); - if(retval) { + if (retval) { set_fs(old_fs); printk("Unable to load IRIX ELF interpreter\n"); send_sig(SIGSEGV, current, 0); @@ -809,12 +842,12 @@ static int load_irix_library(struct file *file) return -ENOEXEC; /* First of all, some simple consistency checks. */ - if(elf_ex.e_type != ET_EXEC || elf_ex.e_phnum > 2 || + if (elf_ex.e_type != ET_EXEC || elf_ex.e_phnum > 2 || !file->f_op->mmap) return -ENOEXEC; /* Now read in all of the header information. */ - if(sizeof(struct elf_phdr) * elf_ex.e_phnum > PAGE_SIZE) + if (sizeof(struct elf_phdr) * elf_ex.e_phnum > PAGE_SIZE) return -ENOEXEC; elf_phdata = kmalloc(sizeof(struct elf_phdr) * elf_ex.e_phnum, GFP_KERNEL); @@ -825,15 +858,15 @@ static int load_irix_library(struct file *file) sizeof(struct elf_phdr) * elf_ex.e_phnum); j = 0; - for(i=0; ip_type == PT_LOAD) j++; + for (i=0; ip_type == PT_LOAD) j++; - if(j != 1) { + if (j != 1) { kfree(elf_phdata); return -ENOEXEC; } - while(elf_phdata->p_type != PT_LOAD) elf_phdata++; + while (elf_phdata->p_type != PT_LOAD) elf_phdata++; /* Now use mmap to map the library into memory. */ down_write(¤t->mm->mmap_sem); @@ -889,9 +922,7 @@ unsigned long irix_mapelf(int fd, struct elf_phdr __user *user_phdrp, int cnt) return -EFAULT; } -#ifdef DEBUG dump_phdrs(user_phdrp, cnt); -#endif for (i = 0; i < cnt; i++, hp++) { if (__get_user(type, &hp->p_type)) @@ -905,14 +936,14 @@ unsigned long irix_mapelf(int fd, struct elf_phdr __user *user_phdrp, int cnt) filp = fget(fd); if (!filp) return -EACCES; - if(!filp->f_op) { + if (!filp->f_op) { printk("irix_mapelf: Bogon filp!\n"); fput(filp); return -EACCES; } hp = user_phdrp; - for(i = 0; i < cnt; i++, hp++) { + for (i = 0; i < cnt; i++, hp++) { int prot; retval = __get_user(vaddr, &hp->p_vaddr); @@ -1015,8 +1046,6 @@ static int notesize(struct memelfnote *en) return sz; } -/* #define DEBUG */ - #define DUMP_WRITE(addr, nr) \ if (!dump_write(file, (addr), (nr))) \ goto end_coredump; @@ -1093,9 +1122,7 @@ static int irix_core_dump(long signr, struct pt_regs * regs, struct file *file) segs++; } -#ifdef DEBUG - printk("irix_core_dump: %d segs taking %d bytes\n", segs, size); -#endif + pr_debug("irix_core_dump: %d segs taking %d bytes\n", segs, size); /* Set up header. */ memcpy(elf.e_ident, ELFMAG, SELFMAG); @@ -1221,7 +1248,7 @@ static int irix_core_dump(long signr, struct pt_regs * regs, struct file *file) struct elf_phdr phdr; int sz = 0; - for(i = 0; i < numnote; i++) + for (i = 0; i < numnote; i++) sz += notesize(¬es[i]); phdr.p_type = PT_NOTE; @@ -1241,7 +1268,7 @@ static int irix_core_dump(long signr, struct pt_regs * regs, struct file *file) dataoff = offset = roundup(offset, PAGE_SIZE); /* Write program headers for segments dump. */ - for(vma = current->mm->mmap, i = 0; + for (vma = current->mm->mmap, i = 0; i < segs && vma != NULL; vma = vma->vm_next) { struct elf_phdr phdr; size_t sz; @@ -1267,7 +1294,7 @@ static int irix_core_dump(long signr, struct pt_regs * regs, struct file *file) DUMP_WRITE(&phdr, sizeof(phdr)); } - for(i = 0; i < numnote; i++) + for (i = 0; i < numnote; i++) if (!writenote(¬es[i], file)) goto end_coredump; @@ -1275,7 +1302,7 @@ static int irix_core_dump(long signr, struct pt_regs * regs, struct file *file) DUMP_SEEK(dataoff); - for(i = 0, vma = current->mm->mmap; + for (i = 0, vma = current->mm->mmap; i < segs && vma != NULL; vma = vma->vm_next) { unsigned long addr = vma->vm_start; @@ -1284,9 +1311,7 @@ static int irix_core_dump(long signr, struct pt_regs * regs, struct file *file) if (!maydump(vma)) continue; i++; -#ifdef DEBUG - printk("elf_core_dump: writing %08lx %lx\n", addr, len); -#endif + pr_debug("elf_core_dump: writing %08lx %lx\n", addr, len); DUMP_WRITE((void __user *)addr, len); } -- cgit v1.2.3 From 7418cb89af6f9e21660d60a4bd088a8b6fd11e81 Mon Sep 17 00:00:00 2001 From: David Quigley Date: Wed, 28 Jun 2006 09:36:46 -0400 Subject: [MIPS] SELinux: Add security hooks to mips-mt {get,set}affinity This patch adds LSM hooks into the setaffinity and getaffinity functions for the mips architecture to enable security modules to control these operations between tasks with different security attributes. This implementation uses the existing task_setscheduler and task_getscheduler LSM hooks. Signed-Off-By: David Quigley Acked-by: Stephen Smalley Signed-off-by: James Morris Signed-off-by: Ralf Baechle --- arch/mips/kernel/mips-mt.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/mips-mt.c b/arch/mips/kernel/mips-mt.c index c1373a6e668b..a32f6797353a 100644 --- a/arch/mips/kernel/mips-mt.c +++ b/arch/mips/kernel/mips-mt.c @@ -96,6 +96,10 @@ asmlinkage long mipsmt_sys_sched_setaffinity(pid_t pid, unsigned int len, goto out_unlock; } + retval = security_task_setscheduler(p, 0, NULL); + if (retval) + goto out_unlock; + /* Record new user-specified CPU set for future reference */ p->thread.user_cpus_allowed = new_mask; @@ -141,8 +145,9 @@ asmlinkage long mipsmt_sys_sched_getaffinity(pid_t pid, unsigned int len, p = find_process_by_pid(pid); if (!p) goto out_unlock; - - retval = 0; + retval = security_task_getscheduler(p); + if (retval) + goto out_unlock; cpus_and(mask, p->thread.user_cpus_allowed, cpu_possible_map); -- cgit v1.2.3 From 447deafba4de56bfa5ed5d5778e56afe55432394 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 5 Feb 2007 00:34:20 +0000 Subject: [MIPS] SMTC: Cleanup idle hook invocation. Signed-off-by: Ralf Baechle --- arch/mips/kernel/process.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c index ec8209f3a0c6..04e5b38d327d 100644 --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c @@ -41,10 +41,6 @@ #include #include #include -#ifdef CONFIG_MIPS_MT_SMTC -#include -extern void smtc_idle_loop_hook(void); -#endif /* CONFIG_MIPS_MT_SMTC */ /* * The idle thread. There's no useful work to be done, so just try to conserve @@ -57,6 +53,8 @@ ATTRIB_NORET void cpu_idle(void) while (1) { while (!need_resched()) { #ifdef CONFIG_MIPS_MT_SMTC + extern void smtc_idle_loop_hook(void); + smtc_idle_loop_hook(); #endif /* CONFIG_MIPS_MT_SMTC */ if (cpu_wait) -- cgit v1.2.3 From 99d233fa9bba1916050dd27d74530342af68b6db Mon Sep 17 00:00:00 2001 From: "Joseph S. Myers" Date: Wed, 10 Jan 2007 12:30:50 +0000 Subject: [MIPS] Use compat_sys_pselect6 The N32 and O32 pselect6 syscalls need to use compat_sys_pselect6 to translate arguments from 32-bit to 64-bit layout. Signed-off-by: Joseph Myers Signed-off-by: Ralf Baechle --- arch/mips/kernel/scall64-n32.S | 2 +- arch/mips/kernel/scall64-o32.S | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index a7bff2a54723..39add2341aa2 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -384,7 +384,7 @@ EXPORT(sysn32_call_table) PTR sys_readlinkat PTR sys_fchmodat PTR sys_faccessat - PTR sys_pselect6 + PTR compat_sys_pselect6 PTR sys_ppoll /* 6265 */ PTR sys_unshare PTR sys_splice diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index e91379c1be1d..c58b8e0105ea 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -506,7 +506,7 @@ sys_call_table: PTR sys_readlinkat PTR sys_fchmodat PTR sys_faccessat /* 4300 */ - PTR sys_pselect6 + PTR compat_sys_pselect6 PTR sys_ppoll PTR sys_unshare PTR sys_splice -- cgit v1.2.3 From 5868756dcbf4b585c3c485e43fc36844c038cef5 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 5 Feb 2007 00:33:21 +0000 Subject: [MIPS] SMTC: Make a bunch of functions and variables static. Signed-off-by: Ralf Baechle --- arch/mips/kernel/smtc.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c index 1475de8e79bf..9251ea824937 100644 --- a/arch/mips/kernel/smtc.c +++ b/arch/mips/kernel/smtc.c @@ -67,15 +67,15 @@ unsigned int ipi_timer_latch[NR_CPUS]; #define IPIBUF_PER_CPU 4 -struct smtc_ipi_q IPIQ[NR_CPUS]; -struct smtc_ipi_q freeIPIq; +static struct smtc_ipi_q IPIQ[NR_CPUS]; +static struct smtc_ipi_q freeIPIq; /* Forward declarations */ void ipi_decode(struct smtc_ipi *); -void post_direct_ipi(int cpu, struct smtc_ipi *pipi); -void setup_cross_vpe_interrupts(void); +static void post_direct_ipi(int cpu, struct smtc_ipi *pipi); +static void setup_cross_vpe_interrupts(void); void init_smtc_stats(void); /* Global SMTC Status */ @@ -190,7 +190,7 @@ void __init sanitize_tlb_entries(void) * Configure shared TLB - VPC configuration bit must be set by caller */ -void smtc_configure_tlb(void) +static void smtc_configure_tlb(void) { int i,tlbsiz,vpes; unsigned long mvpconf0; @@ -638,7 +638,7 @@ int setup_irq_smtc(unsigned int irq, struct irqaction * new, * the VPE. */ -void smtc_ipi_qdump(void) +static void smtc_ipi_qdump(void) { int i; @@ -749,7 +749,7 @@ void smtc_send_ipi(int cpu, int type, unsigned int action) /* * Send IPI message to Halted TC, TargTC/TargVPE already having been set */ -void post_direct_ipi(int cpu, struct smtc_ipi *pipi) +static void post_direct_ipi(int cpu, struct smtc_ipi *pipi) { struct pt_regs *kstack; unsigned long tcstatus; @@ -968,7 +968,7 @@ static void ipi_irq_dispatch(void) static struct irqaction irq_ipi; -void setup_cross_vpe_interrupts(void) +static void setup_cross_vpe_interrupts(void) { if (!cpu_has_vint) panic("SMTC Kernel requires Vectored Interupt support"); @@ -1264,7 +1264,7 @@ void smtc_flush_tlb_asid(unsigned long asid) * Support for single-threading cache flush operations. */ -int halt_state_save[NR_CPUS]; +static int halt_state_save[NR_CPUS]; /* * To really, really be sure that nothing is being done -- cgit v1.2.3 From 3d0f82aea19649a2fd1169cfe63a9b522355386b Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 7 Nov 2006 09:25:51 +0000 Subject: [MIPS] Jaguar: Fix MAC address detection after platform_device conversion. Signed-off-by: Ralf Baechle --- arch/mips/momentum/jaguar_atx/Makefile | 2 +- arch/mips/momentum/jaguar_atx/platform.c | 235 +++++++++++++++++++++++++++++++ arch/mips/momentum/jaguar_atx/prom.c | 55 -------- 3 files changed, 236 insertions(+), 56 deletions(-) create mode 100644 arch/mips/momentum/jaguar_atx/platform.c (limited to 'arch') diff --git a/arch/mips/momentum/jaguar_atx/Makefile b/arch/mips/momentum/jaguar_atx/Makefile index 67372f3f9654..2e8cebd49bc0 100644 --- a/arch/mips/momentum/jaguar_atx/Makefile +++ b/arch/mips/momentum/jaguar_atx/Makefile @@ -6,7 +6,7 @@ # unless it's something special (ie not a .c file). # -obj-y += irq.o prom.o reset.o setup.o +obj-y += irq.o platform.o prom.o reset.o setup.o obj-$(CONFIG_SERIAL_8250_CONSOLE) += ja-console.o obj-$(CONFIG_REMOTE_DEBUG) += dbg_io.o diff --git a/arch/mips/momentum/jaguar_atx/platform.c b/arch/mips/momentum/jaguar_atx/platform.c new file mode 100644 index 000000000000..035ea5137c71 --- /dev/null +++ b/arch/mips/momentum/jaguar_atx/platform.c @@ -0,0 +1,235 @@ +#include +#include +#include +#include +#include + +#include "jaguar_atx_fpga.h" + +#if defined(CONFIG_MV643XX_ETH) || defined(CONFIG_MV643XX_ETH_MODULE) + +static struct resource mv643xx_eth_shared_resources[] = { + [0] = { + .name = "ethernet shared base", + .start = 0xf1000000 + MV643XX_ETH_SHARED_REGS, + .end = 0xf1000000 + MV643XX_ETH_SHARED_REGS + + MV643XX_ETH_SHARED_REGS_SIZE - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device mv643xx_eth_shared_device = { + .name = MV643XX_ETH_SHARED_NAME, + .id = 0, + .num_resources = ARRAY_SIZE(mv643xx_eth_shared_resources), + .resource = mv643xx_eth_shared_resources, +}; + +#define MV_SRAM_BASE 0xfe000000UL +#define MV_SRAM_SIZE (256 * 1024) + +#define MV_SRAM_RXRING_SIZE (MV_SRAM_SIZE / 4) +#define MV_SRAM_TXRING_SIZE (MV_SRAM_SIZE / 4) + +#define MV_SRAM_BASE_ETH0 MV_SRAM_BASE +#define MV_SRAM_BASE_ETH1 (MV_SRAM_BASE + (MV_SRAM_SIZE / 2)) + +#define MV64x60_IRQ_ETH_0 48 +#define MV64x60_IRQ_ETH_1 49 +#define MV64x60_IRQ_ETH_2 50 + +#ifdef CONFIG_MV643XX_ETH_0 + +static struct resource mv64x60_eth0_resources[] = { + [0] = { + .name = "eth0 irq", + .start = MV64x60_IRQ_ETH_0, + .end = MV64x60_IRQ_ETH_0, + .flags = IORESOURCE_IRQ, + }, +}; + +static char eth0_mac_addr[ETH_ALEN]; + +static struct mv643xx_eth_platform_data eth0_pd = { + .mac_addr = eth0_mac_addr, + + .tx_sram_addr = MV_SRAM_BASE_ETH0, + .tx_sram_size = MV_SRAM_TXRING_SIZE, + .tx_queue_size = MV_SRAM_TXRING_SIZE / 16, + + .rx_sram_addr = MV_SRAM_BASE_ETH0 + MV_SRAM_TXRING_SIZE, + .rx_sram_size = MV_SRAM_RXRING_SIZE, + .rx_queue_size = MV_SRAM_RXRING_SIZE / 16, +}; + +static struct platform_device eth0_device = { + .name = MV643XX_ETH_NAME, + .id = 0, + .num_resources = ARRAY_SIZE(mv64x60_eth0_resources), + .resource = mv64x60_eth0_resources, + .dev = { + .platform_data = ð0_pd, + }, +}; +#endif /* CONFIG_MV643XX_ETH_0 */ + +#ifdef CONFIG_MV643XX_ETH_1 + +static struct resource mv64x60_eth1_resources[] = { + [0] = { + .name = "eth1 irq", + .start = MV64x60_IRQ_ETH_1, + .end = MV64x60_IRQ_ETH_1, + .flags = IORESOURCE_IRQ, + }, +}; + +static char eth1_mac_addr[ETH_ALEN]; + +static struct mv643xx_eth_platform_data eth1_pd = { + .mac_addr = eth1_mac_addr, + + .tx_sram_addr = MV_SRAM_BASE_ETH1, + .tx_sram_size = MV_SRAM_TXRING_SIZE, + .tx_queue_size = MV_SRAM_TXRING_SIZE / 16, + + .rx_sram_addr = MV_SRAM_BASE_ETH1 + MV_SRAM_TXRING_SIZE, + .rx_sram_size = MV_SRAM_RXRING_SIZE, + .rx_queue_size = MV_SRAM_RXRING_SIZE / 16, +}; + +static struct platform_device eth1_device = { + .name = MV643XX_ETH_NAME, + .id = 1, + .num_resources = ARRAY_SIZE(mv64x60_eth1_resources), + .resource = mv64x60_eth1_resources, + .dev = { + .platform_data = ð1_pd, + }, +}; +#endif /* CONFIG_MV643XX_ETH_1 */ + +#ifdef CONFIG_MV643XX_ETH_2 + +static struct resource mv64x60_eth2_resources[] = { + [0] = { + .name = "eth2 irq", + .start = MV64x60_IRQ_ETH_2, + .end = MV64x60_IRQ_ETH_2, + .flags = IORESOURCE_IRQ, + }, +}; + +static char eth2_mac_addr[ETH_ALEN]; + +static struct mv643xx_eth_platform_data eth2_pd = { + .mac_addr = eth2_mac_addr, +}; + +static struct platform_device eth2_device = { + .name = MV643XX_ETH_NAME, + .id = 1, + .num_resources = ARRAY_SIZE(mv64x60_eth2_resources), + .resource = mv64x60_eth2_resources, + .dev = { + .platform_data = ð2_pd, + }, +}; +#endif /* CONFIG_MV643XX_ETH_2 */ + +static struct platform_device *mv643xx_eth_pd_devs[] __initdata = { + &mv643xx_eth_shared_device, +#ifdef CONFIG_MV643XX_ETH_0 + ð0_device, +#endif +#ifdef CONFIG_MV643XX_ETH_1 + ð1_device, +#endif +#ifdef CONFIG_MV643XX_ETH_2 + ð2_device, +#endif +}; + +static u8 __init exchange_bit(u8 val, u8 cs) +{ + /* place the data */ + JAGUAR_FPGA_WRITE((val << 2) | cs, EEPROM_MODE); + udelay(1); + + /* turn the clock on */ + JAGUAR_FPGA_WRITE((val << 2) | cs | 0x2, EEPROM_MODE); + udelay(1); + + /* turn the clock off and read-strobe */ + JAGUAR_FPGA_WRITE((val << 2) | cs | 0x10, EEPROM_MODE); + + /* return the data */ + return (JAGUAR_FPGA_READ(EEPROM_MODE) >> 3) & 0x1; +} + +static void __init get_mac(char dest[6]) +{ + u8 read_opcode[12] = {1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; + int i,j; + + for (i = 0; i < 12; i++) + exchange_bit(read_opcode[i], 1); + + for (j = 0; j < 6; j++) { + dest[j] = 0; + for (i = 0; i < 8; i++) { + dest[j] <<= 1; + dest[j] |= exchange_bit(0, 1); + } + } + + /* turn off CS */ + exchange_bit(0,0); +} + +/* + * Copy and increment ethernet MAC address by a small value. + * + * This is useful for systems where the only one MAC address is stored in + * non-volatile memory for multiple ports. + */ +static inline void eth_mac_add(unsigned char *dst, unsigned char *src, + unsigned int add) +{ + int i; + + BUG_ON(add >= 256); + + for (i = ETH_ALEN; i >= 0; i--) { + dst[i] = src[i] + add; + add = dst[i] < src[i]; /* compute carry */ + } + + WARN_ON(add); +} + +static int __init mv643xx_eth_add_pds(void) +{ + unsigned char mac[ETH_ALEN]; + int ret; + + get_mac(mac); +#ifdef CONFIG_MV643XX_ETH_0 + eth_mac_add(eth1_mac_addr, mac, 0); +#endif +#ifdef CONFIG_MV643XX_ETH_1 + eth_mac_add(eth1_mac_addr, mac, 1); +#endif +#ifdef CONFIG_MV643XX_ETH_2 + eth_mac_add(eth2_mac_addr, mac, 2); +#endif + ret = platform_add_devices(mv643xx_eth_pd_devs, + ARRAY_SIZE(mv643xx_eth_pd_devs)); + + return ret; +} + +device_initcall(mv643xx_eth_add_pds); + +#endif /* defined(CONFIG_MV643XX_ETH) || defined(CONFIG_MV643XX_ETH_MODULE) */ diff --git a/arch/mips/momentum/jaguar_atx/prom.c b/arch/mips/momentum/jaguar_atx/prom.c index 66371ffa2196..5dd154ee58f6 100644 --- a/arch/mips/momentum/jaguar_atx/prom.c +++ b/arch/mips/momentum/jaguar_atx/prom.c @@ -39,56 +39,6 @@ const char *get_system_type(void) return "Momentum Jaguar-ATX"; } -#ifdef CONFIG_MV643XX_ETH -extern unsigned char prom_mac_addr_base[6]; - -static void burn_clocks(void) -{ - int i; - - /* this loop should burn at least 1us -- this should be plenty */ - for (i = 0; i < 0x10000; i++) - ; -} - -static u8 exchange_bit(u8 val, u8 cs) -{ - /* place the data */ - JAGUAR_FPGA_WRITE((val << 2) | cs, EEPROM_MODE); - burn_clocks(); - - /* turn the clock on */ - JAGUAR_FPGA_WRITE((val << 2) | cs | 0x2, EEPROM_MODE); - burn_clocks(); - - /* turn the clock off and read-strobe */ - JAGUAR_FPGA_WRITE((val << 2) | cs | 0x10, EEPROM_MODE); - - /* return the data */ - return ((JAGUAR_FPGA_READ(EEPROM_MODE) >> 3) & 0x1); -} - -void get_mac(char dest[6]) -{ - u8 read_opcode[12] = {1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; - int i,j; - - for (i = 0; i < 12; i++) - exchange_bit(read_opcode[i], 1); - - for (j = 0; j < 6; j++) { - dest[j] = 0; - for (i = 0; i < 8; i++) { - dest[j] <<= 1; - dest[j] |= exchange_bit(0, 1); - } - } - - /* turn off CS */ - exchange_bit(0,0); -} -#endif - #ifdef CONFIG_64BIT unsigned long signext(unsigned long addr) @@ -228,11 +178,6 @@ void __init prom_init(void) #endif /* CONFIG_64BIT */ mips_machgroup = MACH_GROUP_MOMENCO; mips_machtype = MACH_MOMENCO_JAGUAR_ATX; - -#ifdef CONFIG_MV643XX_ETH - /* get the base MAC address for on-board ethernet ports */ - get_mac(prom_mac_addr_base); -#endif } void __init prom_free_prom_memory(void) -- cgit v1.2.3 From b86b30f81c7601d9a410d2ce0c64d9ba50d673ae Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 7 Nov 2006 09:23:57 +0000 Subject: [MIPS] Jaguar ATX: Fix large number of warnings. Signed-off-by: Ralf Baechle --- arch/mips/momentum/jaguar_atx/jaguar_atx_fpga.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/mips/momentum/jaguar_atx/jaguar_atx_fpga.h b/arch/mips/momentum/jaguar_atx/jaguar_atx_fpga.h index 6978654c712b..022f6974b76e 100644 --- a/arch/mips/momentum/jaguar_atx/jaguar_atx_fpga.h +++ b/arch/mips/momentum/jaguar_atx/jaguar_atx_fpga.h @@ -46,7 +46,9 @@ extern unsigned long ja_fpga_base; -#define JAGUAR_FPGA_WRITE(x,y) writeb(x, ja_fpga_base + JAGUAR_ATX_REG_##y) -#define JAGUAR_FPGA_READ(x) readb(ja_fpga_base + JAGUAR_ATX_REG_##x) +#define __FPGA_REG_TO_ADDR(reg) \ + ((void *) ja_fpga_base + JAGUAR_ATX_REG_##reg) +#define JAGUAR_FPGA_WRITE(x, reg) writeb(x, __FPGA_REG_TO_ADDR(reg)) +#define JAGUAR_FPGA_READ(reg) readb(__FPGA_REG_TO_ADDR(reg)) #endif -- cgit v1.2.3 From 6d6671066a311703bca1b91645bb1e04cc983387 Mon Sep 17 00:00:00 2001 From: Chris Dearman Date: Thu, 1 Feb 2007 19:54:13 +0000 Subject: [MIPS] Check FCSR for pending interrupts before restoring from a context. Signed-off-by: Chris Dearman Signed-off-by: Ralf Baechle --- arch/mips/kernel/r4k_fpu.S | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'arch') diff --git a/arch/mips/kernel/r4k_fpu.S b/arch/mips/kernel/r4k_fpu.S index 880fa6e841ee..8b5ccfa99dd1 100644 --- a/arch/mips/kernel/r4k_fpu.S +++ b/arch/mips/kernel/r4k_fpu.S @@ -114,6 +114,14 @@ LEAF(_save_fp_context32) */ LEAF(_restore_fp_context) EX lw t0, SC_FPC_CSR(a0) + + /* Fail if the CSR has exceptions pending */ + srl t1, t0, 5 + and t1, t0 + andi t1, 0x1f << 7 + bnez t1, fault + nop + #ifdef CONFIG_64BIT EX ldc1 $f1, SC_FPREGS+8(a0) EX ldc1 $f3, SC_FPREGS+24(a0) @@ -157,6 +165,14 @@ LEAF(_restore_fp_context) LEAF(_restore_fp_context32) /* Restore an o32 sigcontext. */ EX lw t0, SC32_FPC_CSR(a0) + + /* Fail if the CSR has exceptions pending */ + srl t1, t0, 5 + and t1, t0 + andi t1, 0x1f << 7 + bnez t1, fault + nop + EX ldc1 $f0, SC32_FPREGS+0(a0) EX ldc1 $f2, SC32_FPREGS+16(a0) EX ldc1 $f4, SC32_FPREGS+32(a0) -- cgit v1.2.3 From 37f26742437df885ddd72150ab352d0a931cd3a7 Mon Sep 17 00:00:00 2001 From: Chris Dearman Date: Thu, 1 Feb 2007 19:54:13 +0000 Subject: [MIPS] Move .set reorder out of conditional code Signed-off-by: Chris Dearman Signed-off-by: Ralf Baechle --- arch/mips/kernel/r4k_fpu.S | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/kernel/r4k_fpu.S b/arch/mips/kernel/r4k_fpu.S index 8b5ccfa99dd1..59c1577ecbb3 100644 --- a/arch/mips/kernel/r4k_fpu.S +++ b/arch/mips/kernel/r4k_fpu.S @@ -193,9 +193,10 @@ LEAF(_restore_fp_context32) jr ra li v0, 0 # success END(_restore_fp_context32) - .set reorder #endif + .set reorder + .type fault@function .ent fault fault: li v0, -EFAULT # failure -- cgit v1.2.3 From c55197eb549dc09a52b6d91e6f26709a6d6815e5 Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Tue, 6 Feb 2007 10:59:22 +0900 Subject: [MIPS] Fix warnings in run_uncached on 32bit kernel arch/mips/lib/uncached.c: In function 'run_uncached': arch/mips/lib/uncached.c:47: warning: comparison is always true due to limited range of data type arch/mips/lib/uncached.c:48: warning: comparison is always false due to limited range of data type arch/mips/lib/uncached.c:57: warning: comparison is always true due to limited range of data type arch/mips/lib/uncached.c:58: warning: comparison is always false due to limited range of data type Signed-off-by: Yoichi Yuasa Signed-off-by: Ralf Baechle --- arch/mips/lib/uncached.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/mips/lib/uncached.c b/arch/mips/lib/uncached.c index 98ce89f8068b..2388f7f3ffde 100644 --- a/arch/mips/lib/uncached.c +++ b/arch/mips/lib/uncached.c @@ -44,20 +44,24 @@ unsigned long __init run_uncached(void *func) if (sp >= (long)CKSEG0 && sp < (long)CKSEG2) usp = CKSEG1ADDR(sp); +#ifdef CONFIG_64BIT else if ((long long)sp >= (long long)PHYS_TO_XKPHYS(0LL, 0) && (long long)sp < (long long)PHYS_TO_XKPHYS(8LL, 0)) usp = PHYS_TO_XKPHYS((long long)K_CALG_UNCACHED, XKPHYS_TO_PHYS((long long)sp)); +#endif else { BUG(); usp = sp; } if (lfunc >= (long)CKSEG0 && lfunc < (long)CKSEG2) ufunc = CKSEG1ADDR(lfunc); +#ifdef CONFIG_64BIT else if ((long long)lfunc >= (long long)PHYS_TO_XKPHYS(0LL, 0) && (long long)lfunc < (long long)PHYS_TO_XKPHYS(8LL, 0)) ufunc = PHYS_TO_XKPHYS((long long)K_CALG_UNCACHED, XKPHYS_TO_PHYS((long long)lfunc)); +#endif else { BUG(); ufunc = lfunc; -- cgit v1.2.3 From d390008ebf42bdfda106e9de2b2d0abcc9858e26 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 6 Feb 2007 16:43:31 +0000 Subject: [MIPS] Yosemite: Fix missing parens in SERIAL_READ_1 macro Signed-off-by: Ralf Baechle --- arch/mips/pmc-sierra/yosemite/dbg_io.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/pmc-sierra/yosemite/dbg_io.c b/arch/mips/pmc-sierra/yosemite/dbg_io.c index 0f659c9106ac..6362c702e389 100644 --- a/arch/mips/pmc-sierra/yosemite/dbg_io.c +++ b/arch/mips/pmc-sierra/yosemite/dbg_io.c @@ -93,7 +93,7 @@ * Functions to READ and WRITE to serial port 1 */ #define SERIAL_READ_1(ofs) (*((volatile unsigned char*) \ - (TITAN_SERIAL_BASE_1 + ofs) + (TITAN_SERIAL_BASE_1 + ofs))) #define SERIAL_WRITE_1(ofs, val) ((*((volatile unsigned char*) \ (TITAN_SERIAL_BASE_1 + ofs))) = val) -- cgit v1.2.3 From dbbb06b7f6ae8037a5f6b4498e492791e1929635 Mon Sep 17 00:00:00 2001 From: Vitaly Bordug Date: Wed, 24 Jan 2007 22:40:57 +0300 Subject: [POWERPC] 8xx: platform specific mmu updates This is just a straight port of the same done in arch/ppc by Marcelo Tosatti. One used to be [PATCH] ppc32 8xx: update_mmu_cache() needs unconditional tlbie, commit eb07d964b4491d1bb5864cd3d7e7633ccdda9a53 In a nutshell, the board is nearly stuck without this, yet without any visible failure - being just very slow. Signed-off-by: Vitaly Bordug Signed-off-by: Paul Mackerras --- arch/powerpc/mm/mem.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index d1c0758c5611..c85eda63d2b3 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -490,19 +490,19 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, !cpu_has_feature(CPU_FTR_NOEXECUTE) && pfn_valid(pfn)) { struct page *page = pfn_to_page(pfn); +#ifdef CONFIG_8xx + /* On 8xx, cache control instructions (particularly + * "dcbst" from flush_dcache_icache) fault as write + * operation if there is an unpopulated TLB entry + * for the address in question. To workaround that, + * we invalidate the TLB here, thus avoiding dcbst + * misbehaviour. + */ + _tlbie(address); +#endif if (!PageReserved(page) && !test_bit(PG_arch_1, &page->flags)) { if (vma->vm_mm == current->active_mm) { -#ifdef CONFIG_8xx - /* On 8xx, cache control instructions (particularly - * "dcbst" from flush_dcache_icache) fault as write - * operation if there is an unpopulated TLB entry - * for the address in question. To workaround that, - * we invalidate the TLB here, thus avoiding dcbst - * misbehaviour. - */ - _tlbie(address); -#endif __flush_dcache_icache((void *) address); } else flush_dcache_icache_page(page); -- cgit v1.2.3 From 5902ebce22fa5a1ac833565dbc4fde7e8a1bc737 Mon Sep 17 00:00:00 2001 From: Vitaly Bordug Date: Wed, 24 Jan 2007 22:41:06 +0300 Subject: [POWERPC] 8xx: generic 8xx code arch/powerpc port Including support for non-coherent cache, some mm-related things + relevant field in Kconfig and Makefiles. Also included rheap.o compilation if 8xx is defined. Non-coherent mapping were refined and renamed according to Cristoph Hellwig. Orphaned functions were cleaned up. [Also removed arch/ppc/kernel/dma-mapping.c, because otherwise compiling with ARCH=ppc for a non DMA-cache-coherent platform ends up with two copies of __dma_alloc_coherent etc. -- paulus.] Signed-off-by: Vitaly Bordug Signed-off-by: Paul Mackerras --- arch/powerpc/Kconfig | 11 +- arch/powerpc/lib/Makefile | 2 + arch/powerpc/lib/dma-noncoherent.c | 418 +++++++++++++++++++++++++++++++++++ arch/ppc/kernel/Makefile | 1 - arch/ppc/kernel/dma-mapping.c | 442 ------------------------------------- 5 files changed, 429 insertions(+), 445 deletions(-) create mode 100644 arch/powerpc/lib/dma-noncoherent.c delete mode 100644 arch/ppc/kernel/dma-mapping.c (limited to 'arch') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 54d77a5b59f6..ce431b4446f0 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -173,6 +173,11 @@ config PPC_86xx help The Freescale E600 SoCs have 74xx cores. +config PPC_8xx + bool "Freescale 8xx" + select FSL_SOC + select 8xx + config 40x bool "AMCC 40x" select PPC_DCR_NATIVE @@ -181,8 +186,6 @@ config 44x bool "AMCC 44x" select PPC_DCR_NATIVE -config 8xx - bool "Freescale 8xx" config E200 bool "Freescale e200" @@ -210,6 +213,10 @@ config POWER4 config 6xx bool +# this is temp to handle compat with arch=ppc +config 8xx + bool + # this is temp to handle compat with arch=ppc config 83xx bool diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile index a0360ae10d0c..e2d414160c83 100644 --- a/arch/powerpc/lib/Makefile +++ b/arch/powerpc/lib/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_PPC64) += checksum_64.o copypage_64.o copyuser_64.o \ strcase.o obj-$(CONFIG_QUICC_ENGINE) += rheap.o obj-$(CONFIG_XMON) += sstep.o +obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-noncoherent.o ifeq ($(CONFIG_PPC64),y) obj-$(CONFIG_SMP) += locks.o @@ -24,5 +25,6 @@ endif # Temporary hack until we have migrated to asm-powerpc ifeq ($(CONFIG_PPC_MERGE),y) +obj-$(CONFIG_8xx) += rheap.o obj-$(CONFIG_CPM2) += rheap.o endif diff --git a/arch/powerpc/lib/dma-noncoherent.c b/arch/powerpc/lib/dma-noncoherent.c new file mode 100644 index 000000000000..48f3d13a3de5 --- /dev/null +++ b/arch/powerpc/lib/dma-noncoherent.c @@ -0,0 +1,418 @@ +/* + * PowerPC version derived from arch/arm/mm/consistent.c + * Copyright (C) 2001 Dan Malek (dmalek@jlc.net) + * + * Copyright (C) 2000 Russell King + * + * Consistent memory allocators. Used for DMA devices that want to + * share uncached memory with the processor core. The function return + * is the virtual address and 'dma_handle' is the physical address. + * Mostly stolen from the ARM port, with some changes for PowerPC. + * -- Dan + * + * Reorganized to get rid of the arch-specific consistent_* functions + * and provide non-coherent implementations for the DMA API. -Matt + * + * Added in_interrupt() safe dma_alloc_coherent()/dma_free_coherent() + * implementation. This is pulled straight from ARM and barely + * modified. -Matt + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include + +/* + * This address range defaults to a value that is safe for all + * platforms which currently set CONFIG_NOT_COHERENT_CACHE. It + * can be further configured for specific applications under + * the "Advanced Setup" menu. -Matt + */ +#define CONSISTENT_BASE (CONFIG_CONSISTENT_START) +#define CONSISTENT_END (CONFIG_CONSISTENT_START + CONFIG_CONSISTENT_SIZE) +#define CONSISTENT_OFFSET(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PAGE_SHIFT) + +/* + * This is the page table (2MB) covering uncached, DMA consistent allocations + */ +static pte_t *consistent_pte; +static DEFINE_SPINLOCK(consistent_lock); + +/* + * VM region handling support. + * + * This should become something generic, handling VM region allocations for + * vmalloc and similar (ioremap, module space, etc). + * + * I envisage vmalloc()'s supporting vm_struct becoming: + * + * struct vm_struct { + * struct vm_region region; + * unsigned long flags; + * struct page **pages; + * unsigned int nr_pages; + * unsigned long phys_addr; + * }; + * + * get_vm_area() would then call vm_region_alloc with an appropriate + * struct vm_region head (eg): + * + * struct vm_region vmalloc_head = { + * .vm_list = LIST_HEAD_INIT(vmalloc_head.vm_list), + * .vm_start = VMALLOC_START, + * .vm_end = VMALLOC_END, + * }; + * + * However, vmalloc_head.vm_start is variable (typically, it is dependent on + * the amount of RAM found at boot time.) I would imagine that get_vm_area() + * would have to initialise this each time prior to calling vm_region_alloc(). + */ +struct vm_region { + struct list_head vm_list; + unsigned long vm_start; + unsigned long vm_end; +}; + +static struct vm_region consistent_head = { + .vm_list = LIST_HEAD_INIT(consistent_head.vm_list), + .vm_start = CONSISTENT_BASE, + .vm_end = CONSISTENT_END, +}; + +static struct vm_region * +vm_region_alloc(struct vm_region *head, size_t size, gfp_t gfp) +{ + unsigned long addr = head->vm_start, end = head->vm_end - size; + unsigned long flags; + struct vm_region *c, *new; + + new = kmalloc(sizeof(struct vm_region), gfp); + if (!new) + goto out; + + spin_lock_irqsave(&consistent_lock, flags); + + list_for_each_entry(c, &head->vm_list, vm_list) { + if ((addr + size) < addr) + goto nospc; + if ((addr + size) <= c->vm_start) + goto found; + addr = c->vm_end; + if (addr > end) + goto nospc; + } + + found: + /* + * Insert this entry _before_ the one we found. + */ + list_add_tail(&new->vm_list, &c->vm_list); + new->vm_start = addr; + new->vm_end = addr + size; + + spin_unlock_irqrestore(&consistent_lock, flags); + return new; + + nospc: + spin_unlock_irqrestore(&consistent_lock, flags); + kfree(new); + out: + return NULL; +} + +static struct vm_region *vm_region_find(struct vm_region *head, unsigned long addr) +{ + struct vm_region *c; + + list_for_each_entry(c, &head->vm_list, vm_list) { + if (c->vm_start == addr) + goto out; + } + c = NULL; + out: + return c; +} + +/* + * Allocate DMA-coherent memory space and return both the kernel remapped + * virtual and bus address for that space. + */ +void * +__dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp) +{ + struct page *page; + struct vm_region *c; + unsigned long order; + u64 mask = 0x00ffffff, limit; /* ISA default */ + + if (!consistent_pte) { + printk(KERN_ERR "%s: not initialised\n", __func__); + dump_stack(); + return NULL; + } + + size = PAGE_ALIGN(size); + limit = (mask + 1) & ~mask; + if ((limit && size >= limit) || size >= (CONSISTENT_END - CONSISTENT_BASE)) { + printk(KERN_WARNING "coherent allocation too big (requested %#x mask %#Lx)\n", + size, mask); + return NULL; + } + + order = get_order(size); + + if (mask != 0xffffffff) + gfp |= GFP_DMA; + + page = alloc_pages(gfp, order); + if (!page) + goto no_page; + + /* + * Invalidate any data that might be lurking in the + * kernel direct-mapped region for device DMA. + */ + { + unsigned long kaddr = (unsigned long)page_address(page); + memset(page_address(page), 0, size); + flush_dcache_range(kaddr, kaddr + size); + } + + /* + * Allocate a virtual address in the consistent mapping region. + */ + c = vm_region_alloc(&consistent_head, size, + gfp & ~(__GFP_DMA | __GFP_HIGHMEM)); + if (c) { + unsigned long vaddr = c->vm_start; + pte_t *pte = consistent_pte + CONSISTENT_OFFSET(vaddr); + struct page *end = page + (1 << order); + + split_page(page, order); + + /* + * Set the "dma handle" + */ + *handle = page_to_bus(page); + + do { + BUG_ON(!pte_none(*pte)); + + SetPageReserved(page); + set_pte_at(&init_mm, vaddr, + pte, mk_pte(page, pgprot_noncached(PAGE_KERNEL))); + page++; + pte++; + vaddr += PAGE_SIZE; + } while (size -= PAGE_SIZE); + + /* + * Free the otherwise unused pages. + */ + while (page < end) { + __free_page(page); + page++; + } + + return (void *)c->vm_start; + } + + if (page) + __free_pages(page, order); + no_page: + return NULL; +} +EXPORT_SYMBOL(__dma_alloc_coherent); + +/* + * free a page as defined by the above mapping. + */ +void __dma_free_coherent(size_t size, void *vaddr) +{ + struct vm_region *c; + unsigned long flags, addr; + pte_t *ptep; + + size = PAGE_ALIGN(size); + + spin_lock_irqsave(&consistent_lock, flags); + + c = vm_region_find(&consistent_head, (unsigned long)vaddr); + if (!c) + goto no_area; + + if ((c->vm_end - c->vm_start) != size) { + printk(KERN_ERR "%s: freeing wrong coherent size (%ld != %d)\n", + __func__, c->vm_end - c->vm_start, size); + dump_stack(); + size = c->vm_end - c->vm_start; + } + + ptep = consistent_pte + CONSISTENT_OFFSET(c->vm_start); + addr = c->vm_start; + do { + pte_t pte = ptep_get_and_clear(&init_mm, addr, ptep); + unsigned long pfn; + + ptep++; + addr += PAGE_SIZE; + + if (!pte_none(pte) && pte_present(pte)) { + pfn = pte_pfn(pte); + + if (pfn_valid(pfn)) { + struct page *page = pfn_to_page(pfn); + ClearPageReserved(page); + + __free_page(page); + continue; + } + } + + printk(KERN_CRIT "%s: bad page in kernel page table\n", + __func__); + } while (size -= PAGE_SIZE); + + flush_tlb_kernel_range(c->vm_start, c->vm_end); + + list_del(&c->vm_list); + + spin_unlock_irqrestore(&consistent_lock, flags); + + kfree(c); + return; + + no_area: + spin_unlock_irqrestore(&consistent_lock, flags); + printk(KERN_ERR "%s: trying to free invalid coherent area: %p\n", + __func__, vaddr); + dump_stack(); +} +EXPORT_SYMBOL(__dma_free_coherent); + +/* + * Initialise the consistent memory allocation. + */ +static int __init dma_alloc_init(void) +{ + pgd_t *pgd; + pmd_t *pmd; + pte_t *pte; + int ret = 0; + + do { + pgd = pgd_offset(&init_mm, CONSISTENT_BASE); + pmd = pmd_alloc(&init_mm, pgd, CONSISTENT_BASE); + if (!pmd) { + printk(KERN_ERR "%s: no pmd tables\n", __func__); + ret = -ENOMEM; + break; + } + WARN_ON(!pmd_none(*pmd)); + + pte = pte_alloc_kernel(pmd, CONSISTENT_BASE); + if (!pte) { + printk(KERN_ERR "%s: no pte tables\n", __func__); + ret = -ENOMEM; + break; + } + + consistent_pte = pte; + } while (0); + + return ret; +} + +core_initcall(dma_alloc_init); + +/* + * make an area consistent. + */ +void __dma_sync(void *vaddr, size_t size, int direction) +{ + unsigned long start = (unsigned long)vaddr; + unsigned long end = start + size; + + switch (direction) { + case DMA_NONE: + BUG(); + case DMA_FROM_DEVICE: /* invalidate only */ + invalidate_dcache_range(start, end); + break; + case DMA_TO_DEVICE: /* writeback only */ + clean_dcache_range(start, end); + break; + case DMA_BIDIRECTIONAL: /* writeback and invalidate */ + flush_dcache_range(start, end); + break; + } +} +EXPORT_SYMBOL(__dma_sync); + +#ifdef CONFIG_HIGHMEM +/* + * __dma_sync_page() implementation for systems using highmem. + * In this case, each page of a buffer must be kmapped/kunmapped + * in order to have a virtual address for __dma_sync(). This must + * not sleep so kmap_atomic()/kunmap_atomic() are used. + * + * Note: yes, it is possible and correct to have a buffer extend + * beyond the first page. + */ +static inline void __dma_sync_page_highmem(struct page *page, + unsigned long offset, size_t size, int direction) +{ + size_t seg_size = min((size_t)(PAGE_SIZE - offset), size); + size_t cur_size = seg_size; + unsigned long flags, start, seg_offset = offset; + int nr_segs = 1 + ((size - seg_size) + PAGE_SIZE - 1)/PAGE_SIZE; + int seg_nr = 0; + + local_irq_save(flags); + + do { + start = (unsigned long)kmap_atomic(page + seg_nr, + KM_PPC_SYNC_PAGE) + seg_offset; + + /* Sync this buffer segment */ + __dma_sync((void *)start, seg_size, direction); + kunmap_atomic((void *)start, KM_PPC_SYNC_PAGE); + seg_nr++; + + /* Calculate next buffer segment size */ + seg_size = min((size_t)PAGE_SIZE, size - cur_size); + + /* Add the segment size to our running total */ + cur_size += seg_size; + seg_offset = 0; + } while (seg_nr < nr_segs); + + local_irq_restore(flags); +} +#endif /* CONFIG_HIGHMEM */ + +/* + * __dma_sync_page makes memory consistent. identical to __dma_sync, but + * takes a struct page instead of a virtual address + */ +void __dma_sync_page(struct page *page, unsigned long offset, + size_t size, int direction) +{ +#ifdef CONFIG_HIGHMEM + __dma_sync_page_highmem(page, offset, size, direction); +#else + unsigned long start = (unsigned long)page_address(page) + offset; + __dma_sync((void *)start, size, direction); +#endif +} +EXPORT_SYMBOL(__dma_sync_page); diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile index 466437f4bcbb..6b4f022111e7 100644 --- a/arch/ppc/kernel/Makefile +++ b/arch/ppc/kernel/Makefile @@ -12,7 +12,6 @@ obj-y := entry.o traps.o time.o misc.o \ setup.o \ ppc_htab.o obj-$(CONFIG_MODULES) += ppc_ksyms.o -obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-mapping.o obj-$(CONFIG_PCI) += pci.o obj-$(CONFIG_RAPIDIO) += rio.o obj-$(CONFIG_KGDB) += ppc-stub.o diff --git a/arch/ppc/kernel/dma-mapping.c b/arch/ppc/kernel/dma-mapping.c deleted file mode 100644 index 10fec7363962..000000000000 --- a/arch/ppc/kernel/dma-mapping.c +++ /dev/null @@ -1,442 +0,0 @@ -/* - * PowerPC version derived from arch/arm/mm/consistent.c - * Copyright (C) 2001 Dan Malek (dmalek@jlc.net) - * - * Copyright (C) 2000 Russell King - * - * Consistent memory allocators. Used for DMA devices that want to - * share uncached memory with the processor core. The function return - * is the virtual address and 'dma_handle' is the physical address. - * Mostly stolen from the ARM port, with some changes for PowerPC. - * -- Dan - * - * Reorganized to get rid of the arch-specific consistent_* functions - * and provide non-coherent implementations for the DMA API. -Matt - * - * Added in_interrupt() safe dma_alloc_coherent()/dma_free_coherent() - * implementation. This is pulled straight from ARM and barely - * modified. -Matt - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -int map_page(unsigned long va, phys_addr_t pa, int flags); - -#include - -/* - * This address range defaults to a value that is safe for all - * platforms which currently set CONFIG_NOT_COHERENT_CACHE. It - * can be further configured for specific applications under - * the "Advanced Setup" menu. -Matt - */ -#define CONSISTENT_BASE (CONFIG_CONSISTENT_START) -#define CONSISTENT_END (CONFIG_CONSISTENT_START + CONFIG_CONSISTENT_SIZE) -#define CONSISTENT_OFFSET(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PAGE_SHIFT) - -/* - * This is the page table (2MB) covering uncached, DMA consistent allocations - */ -static pte_t *consistent_pte; -static DEFINE_SPINLOCK(consistent_lock); - -/* - * VM region handling support. - * - * This should become something generic, handling VM region allocations for - * vmalloc and similar (ioremap, module space, etc). - * - * I envisage vmalloc()'s supporting vm_struct becoming: - * - * struct vm_struct { - * struct vm_region region; - * unsigned long flags; - * struct page **pages; - * unsigned int nr_pages; - * unsigned long phys_addr; - * }; - * - * get_vm_area() would then call vm_region_alloc with an appropriate - * struct vm_region head (eg): - * - * struct vm_region vmalloc_head = { - * .vm_list = LIST_HEAD_INIT(vmalloc_head.vm_list), - * .vm_start = VMALLOC_START, - * .vm_end = VMALLOC_END, - * }; - * - * However, vmalloc_head.vm_start is variable (typically, it is dependent on - * the amount of RAM found at boot time.) I would imagine that get_vm_area() - * would have to initialise this each time prior to calling vm_region_alloc(). - */ -struct vm_region { - struct list_head vm_list; - unsigned long vm_start; - unsigned long vm_end; -}; - -static struct vm_region consistent_head = { - .vm_list = LIST_HEAD_INIT(consistent_head.vm_list), - .vm_start = CONSISTENT_BASE, - .vm_end = CONSISTENT_END, -}; - -static struct vm_region * -vm_region_alloc(struct vm_region *head, size_t size, gfp_t gfp) -{ - unsigned long addr = head->vm_start, end = head->vm_end - size; - unsigned long flags; - struct vm_region *c, *new; - - new = kmalloc(sizeof(struct vm_region), gfp); - if (!new) - goto out; - - spin_lock_irqsave(&consistent_lock, flags); - - list_for_each_entry(c, &head->vm_list, vm_list) { - if ((addr + size) < addr) - goto nospc; - if ((addr + size) <= c->vm_start) - goto found; - addr = c->vm_end; - if (addr > end) - goto nospc; - } - - found: - /* - * Insert this entry _before_ the one we found. - */ - list_add_tail(&new->vm_list, &c->vm_list); - new->vm_start = addr; - new->vm_end = addr + size; - - spin_unlock_irqrestore(&consistent_lock, flags); - return new; - - nospc: - spin_unlock_irqrestore(&consistent_lock, flags); - kfree(new); - out: - return NULL; -} - -static struct vm_region *vm_region_find(struct vm_region *head, unsigned long addr) -{ - struct vm_region *c; - - list_for_each_entry(c, &head->vm_list, vm_list) { - if (c->vm_start == addr) - goto out; - } - c = NULL; - out: - return c; -} - -/* - * Allocate DMA-coherent memory space and return both the kernel remapped - * virtual and bus address for that space. - */ -void * -__dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp) -{ - struct page *page; - struct vm_region *c; - unsigned long order; - u64 mask = 0x00ffffff, limit; /* ISA default */ - - if (!consistent_pte) { - printk(KERN_ERR "%s: not initialised\n", __func__); - dump_stack(); - return NULL; - } - - size = PAGE_ALIGN(size); - limit = (mask + 1) & ~mask; - if ((limit && size >= limit) || size >= (CONSISTENT_END - CONSISTENT_BASE)) { - printk(KERN_WARNING "coherent allocation too big (requested %#x mask %#Lx)\n", - size, mask); - return NULL; - } - - order = get_order(size); - - if (mask != 0xffffffff) - gfp |= GFP_DMA; - - page = alloc_pages(gfp, order); - if (!page) - goto no_page; - - /* - * Invalidate any data that might be lurking in the - * kernel direct-mapped region for device DMA. - */ - { - unsigned long kaddr = (unsigned long)page_address(page); - memset(page_address(page), 0, size); - flush_dcache_range(kaddr, kaddr + size); - } - - /* - * Allocate a virtual address in the consistent mapping region. - */ - c = vm_region_alloc(&consistent_head, size, - gfp & ~(__GFP_DMA | __GFP_HIGHMEM)); - if (c) { - unsigned long vaddr = c->vm_start; - pte_t *pte = consistent_pte + CONSISTENT_OFFSET(vaddr); - struct page *end = page + (1 << order); - - split_page(page, order); - - /* - * Set the "dma handle" - */ - *handle = page_to_bus(page); - - do { - BUG_ON(!pte_none(*pte)); - - SetPageReserved(page); - set_pte_at(&init_mm, vaddr, - pte, mk_pte(page, pgprot_noncached(PAGE_KERNEL))); - page++; - pte++; - vaddr += PAGE_SIZE; - } while (size -= PAGE_SIZE); - - /* - * Free the otherwise unused pages. - */ - while (page < end) { - __free_page(page); - page++; - } - - return (void *)c->vm_start; - } - - if (page) - __free_pages(page, order); - no_page: - return NULL; -} -EXPORT_SYMBOL(__dma_alloc_coherent); - -/* - * free a page as defined by the above mapping. - */ -void __dma_free_coherent(size_t size, void *vaddr) -{ - struct vm_region *c; - unsigned long flags, addr; - pte_t *ptep; - - size = PAGE_ALIGN(size); - - spin_lock_irqsave(&consistent_lock, flags); - - c = vm_region_find(&consistent_head, (unsigned long)vaddr); - if (!c) - goto no_area; - - if ((c->vm_end - c->vm_start) != size) { - printk(KERN_ERR "%s: freeing wrong coherent size (%ld != %d)\n", - __func__, c->vm_end - c->vm_start, size); - dump_stack(); - size = c->vm_end - c->vm_start; - } - - ptep = consistent_pte + CONSISTENT_OFFSET(c->vm_start); - addr = c->vm_start; - do { - pte_t pte = ptep_get_and_clear(&init_mm, addr, ptep); - unsigned long pfn; - - ptep++; - addr += PAGE_SIZE; - - if (!pte_none(pte) && pte_present(pte)) { - pfn = pte_pfn(pte); - - if (pfn_valid(pfn)) { - struct page *page = pfn_to_page(pfn); - ClearPageReserved(page); - - __free_page(page); - continue; - } - } - - printk(KERN_CRIT "%s: bad page in kernel page table\n", - __func__); - } while (size -= PAGE_SIZE); - - flush_tlb_kernel_range(c->vm_start, c->vm_end); - - list_del(&c->vm_list); - - spin_unlock_irqrestore(&consistent_lock, flags); - - kfree(c); - return; - - no_area: - spin_unlock_irqrestore(&consistent_lock, flags); - printk(KERN_ERR "%s: trying to free invalid coherent area: %p\n", - __func__, vaddr); - dump_stack(); -} -EXPORT_SYMBOL(__dma_free_coherent); - -/* - * Initialise the consistent memory allocation. - */ -static int __init dma_alloc_init(void) -{ - pgd_t *pgd; - pmd_t *pmd; - pte_t *pte; - int ret = 0; - - do { - pgd = pgd_offset(&init_mm, CONSISTENT_BASE); - pmd = pmd_alloc(&init_mm, pgd, CONSISTENT_BASE); - if (!pmd) { - printk(KERN_ERR "%s: no pmd tables\n", __func__); - ret = -ENOMEM; - break; - } - WARN_ON(!pmd_none(*pmd)); - - pte = pte_alloc_kernel(pmd, CONSISTENT_BASE); - if (!pte) { - printk(KERN_ERR "%s: no pte tables\n", __func__); - ret = -ENOMEM; - break; - } - - consistent_pte = pte; - } while (0); - - return ret; -} - -core_initcall(dma_alloc_init); - -/* - * make an area consistent. - */ -void __dma_sync(void *vaddr, size_t size, int direction) -{ - unsigned long start = (unsigned long)vaddr; - unsigned long end = start + size; - - switch (direction) { - case DMA_NONE: - BUG(); - case DMA_FROM_DEVICE: /* invalidate only */ - invalidate_dcache_range(start, end); - break; - case DMA_TO_DEVICE: /* writeback only */ - clean_dcache_range(start, end); - break; - case DMA_BIDIRECTIONAL: /* writeback and invalidate */ - flush_dcache_range(start, end); - break; - } -} -EXPORT_SYMBOL(__dma_sync); - -#ifdef CONFIG_HIGHMEM -/* - * __dma_sync_page() implementation for systems using highmem. - * In this case, each page of a buffer must be kmapped/kunmapped - * in order to have a virtual address for __dma_sync(). This must - * not sleep so kmap_atomic()/kunmap_atomic() are used. - * - * Note: yes, it is possible and correct to have a buffer extend - * beyond the first page. - */ -static inline void __dma_sync_page_highmem(struct page *page, - unsigned long offset, size_t size, int direction) -{ - size_t seg_size = min((size_t)(PAGE_SIZE - offset), size); - size_t cur_size = seg_size; - unsigned long flags, start, seg_offset = offset; - int nr_segs = 1 + ((size - seg_size) + PAGE_SIZE - 1)/PAGE_SIZE; - int seg_nr = 0; - - local_irq_save(flags); - - do { - start = (unsigned long)kmap_atomic(page + seg_nr, - KM_PPC_SYNC_PAGE) + seg_offset; - - /* Sync this buffer segment */ - __dma_sync((void *)start, seg_size, direction); - kunmap_atomic((void *)start, KM_PPC_SYNC_PAGE); - seg_nr++; - - /* Calculate next buffer segment size */ - seg_size = min((size_t)PAGE_SIZE, size - cur_size); - - /* Add the segment size to our running total */ - cur_size += seg_size; - seg_offset = 0; - } while (seg_nr < nr_segs); - - local_irq_restore(flags); -} -#endif /* CONFIG_HIGHMEM */ - -/* - * __dma_sync_page makes memory consistent. identical to __dma_sync, but - * takes a struct page instead of a virtual address - */ -void __dma_sync_page(struct page *page, unsigned long offset, - size_t size, int direction) -{ -#ifdef CONFIG_HIGHMEM - __dma_sync_page_highmem(page, offset, size, direction); -#else - unsigned long start = (unsigned long)page_address(page) + offset; - __dma_sync((void *)start, size, direction); -#endif -} -EXPORT_SYMBOL(__dma_sync_page); -- cgit v1.2.3 From 88bdc6f061cfb4579d2327fd457d4b7807525a0e Mon Sep 17 00:00:00 2001 From: Vitaly Bordug Date: Wed, 24 Jan 2007 22:41:15 +0300 Subject: [POWERPC] 8xx: platform related changes to the fsl_soc Added 8xx SoC peripherials: fec for Ethernet and smc for UARTs. Ordinary routines to extract values from the device tree and insert respective platform devices Signed-off-by: Vitaly Bordug Signed-off-by: Paul Mackerras --- arch/powerpc/sysdev/fsl_soc.c | 274 +++++++++++++++++++++++++++++++++++++++++- 1 file changed, 272 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index ad31e56e892b..9f2a9a444bfb 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -38,7 +38,8 @@ #include extern void init_fcc_ioports(struct fs_platform_info*); -extern void init_scc_ioports(struct fs_uart_platform_info*); +extern void init_fec_ioports(struct fs_platform_info*); +extern void init_smc_ioports(struct fs_uart_platform_info*); static phys_addr_t immrbase = -1; phys_addr_t get_immrbase(void) @@ -63,7 +64,7 @@ phys_addr_t get_immrbase(void) EXPORT_SYMBOL(get_immrbase); -#ifdef CONFIG_CPM2 +#if defined(CONFIG_CPM2) || defined(CONFIG_8xx) static u32 brgfreq = -1; @@ -544,6 +545,8 @@ arch_initcall(fsl_usb_of_init); #ifdef CONFIG_CPM2 +extern void init_scc_ioports(struct fs_uart_platform_info*); + static const char fcc_regs[] = "fcc_regs"; static const char fcc_regs_c[] = "fcc_regs_c"; static const char fcc_pram[] = "fcc_pram"; @@ -792,3 +795,270 @@ err: arch_initcall(cpm_uart_of_init); #endif /* CONFIG_CPM2 */ + +#ifdef CONFIG_8xx + +extern void init_scc_ioports(struct fs_platform_info*); +extern int platform_device_skip(char *model, int id); + +static int __init fs_enet_mdio_of_init(void) +{ + struct device_node *np; + unsigned int i; + struct platform_device *mdio_dev; + struct resource res; + int ret; + + for (np = NULL, i = 0; + (np = of_find_compatible_node(np, "mdio", "fs_enet")) != NULL; + i++) { + struct fs_mii_fec_platform_info mdio_data; + + memset(&res, 0, sizeof(res)); + memset(&mdio_data, 0, sizeof(mdio_data)); + + ret = of_address_to_resource(np, 0, &res); + if (ret) + goto err; + + mdio_dev = + platform_device_register_simple("fsl-cpm-fec-mdio", + res.start, &res, 1); + if (IS_ERR(mdio_dev)) { + ret = PTR_ERR(mdio_dev); + goto err; + } + + mdio_data.mii_speed = ((((ppc_proc_freq + 4999999) / 2500000) / 2) & 0x3F) << 1; + + ret = + platform_device_add_data(mdio_dev, &mdio_data, + sizeof(struct fs_mii_fec_platform_info)); + if (ret) + goto unreg; + } + return 0; + +unreg: + platform_device_unregister(mdio_dev); +err: + return ret; +} + +arch_initcall(fs_enet_mdio_of_init); + +static const char *enet_regs = "regs"; +static const char *enet_pram = "pram"; +static const char *enet_irq = "interrupt"; +static char bus_id[9][BUS_ID_SIZE]; + +static int __init fs_enet_of_init(void) +{ + struct device_node *np; + unsigned int i; + struct platform_device *fs_enet_dev = NULL; + struct resource res; + int ret; + + for (np = NULL, i = 0; + (np = of_find_compatible_node(np, "network", "fs_enet")) != NULL; + i++) { + struct resource r[4]; + struct device_node *phy = NULL, *mdio = NULL; + struct fs_platform_info fs_enet_data; + unsigned int *id, *phy_addr; + void *mac_addr; + phandle *ph; + char *model; + + memset(r, 0, sizeof(r)); + memset(&fs_enet_data, 0, sizeof(fs_enet_data)); + + model = (char *)get_property(np, "model", NULL); + if (model == NULL) { + ret = -ENODEV; + goto unreg; + } + + id = (u32 *) get_property(np, "device-id", NULL); + fs_enet_data.fs_no = *id; + + if (platform_device_skip(model, *id)) + continue; + + ret = of_address_to_resource(np, 0, &r[0]); + if (ret) + goto err; + r[0].name = enet_regs; + + mac_addr = (void *)get_property(np, "mac-address", NULL); + memcpy(fs_enet_data.macaddr, mac_addr, 6); + + ph = (phandle *) get_property(np, "phy-handle", NULL); + if (ph != NULL) + phy = of_find_node_by_phandle(*ph); + + if (phy != NULL) { + phy_addr = (u32 *) get_property(phy, "reg", NULL); + fs_enet_data.phy_addr = *phy_addr; + fs_enet_data.has_phy = 1; + + mdio = of_get_parent(phy); + ret = of_address_to_resource(mdio, 0, &res); + if (ret) { + of_node_put(phy); + of_node_put(mdio); + goto unreg; + } + } + + model = (char*)get_property(np, "model", NULL); + strcpy(fs_enet_data.fs_type, model); + + if (strstr(model, "FEC")) { + r[1].start = r[1].end = irq_of_parse_and_map(np, 0); + r[1].flags = IORESOURCE_IRQ; + r[1].name = enet_irq; + + fs_enet_dev = + platform_device_register_simple("fsl-cpm-fec", i, &r[0], 2); + + if (IS_ERR(fs_enet_dev)) { + ret = PTR_ERR(fs_enet_dev); + goto err; + } + + fs_enet_data.rx_ring = 128; + fs_enet_data.tx_ring = 16; + fs_enet_data.rx_copybreak = 240; + fs_enet_data.use_napi = 1; + fs_enet_data.napi_weight = 17; + + snprintf((char*)&bus_id[i], BUS_ID_SIZE, "%x:%02x", + (u32)res.start, fs_enet_data.phy_addr); + fs_enet_data.bus_id = (char*)&bus_id[i]; + fs_enet_data.init_ioports = init_fec_ioports; + } + if (strstr(model, "SCC")) { + ret = of_address_to_resource(np, 1, &r[1]); + if (ret) + goto err; + r[1].name = enet_pram; + + r[2].start = r[2].end = irq_of_parse_and_map(np, 0); + r[2].flags = IORESOURCE_IRQ; + r[2].name = enet_irq; + + fs_enet_dev = + platform_device_register_simple("fsl-cpm-scc", i, &r[0], 3); + + if (IS_ERR(fs_enet_dev)) { + ret = PTR_ERR(fs_enet_dev); + goto err; + } + + fs_enet_data.rx_ring = 64; + fs_enet_data.tx_ring = 8; + fs_enet_data.rx_copybreak = 240; + fs_enet_data.use_napi = 1; + fs_enet_data.napi_weight = 17; + + snprintf((char*)&bus_id[i], BUS_ID_SIZE, "%s", "fixed@10:1"); + fs_enet_data.bus_id = (char*)&bus_id[i]; + fs_enet_data.init_ioports = init_scc_ioports; + } + + of_node_put(phy); + of_node_put(mdio); + + ret = platform_device_add_data(fs_enet_dev, &fs_enet_data, + sizeof(struct + fs_platform_info)); + if (ret) + goto unreg; + } + return 0; + +unreg: + platform_device_unregister(fs_enet_dev); +err: + return ret; +} + +arch_initcall(fs_enet_of_init); + + +static const char *smc_regs = "regs"; +static const char *smc_pram = "pram"; + +static int __init cpm_smc_uart_of_init(void) +{ + struct device_node *np; + unsigned int i; + struct platform_device *cpm_uart_dev; + int ret; + + for (np = NULL, i = 0; + (np = of_find_compatible_node(np, "serial", "cpm_uart")) != NULL; + i++) { + struct resource r[3]; + struct fs_uart_platform_info cpm_uart_data; + int *id; + char *model; + + memset(r, 0, sizeof(r)); + memset(&cpm_uart_data, 0, sizeof(cpm_uart_data)); + + ret = of_address_to_resource(np, 0, &r[0]); + if (ret) + goto err; + + r[0].name = smc_regs; + + ret = of_address_to_resource(np, 1, &r[1]); + if (ret) + goto err; + r[1].name = smc_pram; + + r[2].start = r[2].end = irq_of_parse_and_map(np, 0); + r[2].flags = IORESOURCE_IRQ; + + cpm_uart_dev = + platform_device_register_simple("fsl-cpm-smc:uart", i, &r[0], 3); + + if (IS_ERR(cpm_uart_dev)) { + ret = PTR_ERR(cpm_uart_dev); + goto err; + } + + model = (char*)get_property(np, "model", NULL); + strcpy(cpm_uart_data.fs_type, model); + + id = (int*)get_property(np, "device-id", NULL); + cpm_uart_data.fs_no = *id; + cpm_uart_data.uart_clk = ppc_proc_freq; + + cpm_uart_data.tx_num_fifo = 4; + cpm_uart_data.tx_buf_size = 32; + cpm_uart_data.rx_num_fifo = 4; + cpm_uart_data.rx_buf_size = 32; + + ret = + platform_device_add_data(cpm_uart_dev, &cpm_uart_data, + sizeof(struct + fs_uart_platform_info)); + if (ret) + goto unreg; + } + + return 0; + +unreg: + platform_device_unregister(cpm_uart_dev); +err: + return ret; +} + +arch_initcall(cpm_smc_uart_of_init); + +#endif /* CONFIG_8xx */ -- cgit v1.2.3 From f2a0bd3753dad7ea4605ebd5435716b39e9f92bb Mon Sep 17 00:00:00 2001 From: Vitaly Bordug Date: Wed, 24 Jan 2007 22:41:24 +0300 Subject: [POWERPC] 8xx: powerpc port of core CPM PIC This covers common CPM access functions, CPM interrupt controller code, micropatch and a few compatibility things to kee the same driver base working with arch/ppc. This version is refined with all the comments (mostly PIC-related) addressed. Signed-off-by: Vitaly Bordug Signed-off-by: Paul Mackerras --- arch/powerpc/sysdev/Makefile | 2 + arch/powerpc/sysdev/commproc.c | 398 +++++++++++++++++++++ arch/powerpc/sysdev/micropatch.c | 743 +++++++++++++++++++++++++++++++++++++++ arch/powerpc/sysdev/mpc8xx_pic.c | 197 +++++++++++ arch/powerpc/sysdev/mpc8xx_pic.h | 12 + 5 files changed, 1352 insertions(+) create mode 100644 arch/powerpc/sysdev/commproc.c create mode 100644 arch/powerpc/sysdev/micropatch.c create mode 100644 arch/powerpc/sysdev/mpc8xx_pic.c create mode 100644 arch/powerpc/sysdev/mpc8xx_pic.h (limited to 'arch') diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index 2621a7e72d2d..85dcdf178415 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -22,4 +22,6 @@ endif ifeq ($(ARCH),powerpc) obj-$(CONFIG_MTD) += rom.o obj-$(CONFIG_CPM2) += cpm2_common.o cpm2_pic.o +obj-$(CONFIG_8xx) += mpc8xx_pic.o commproc.o +obj-$(CONFIG_UCODE_PATCH) += micropatch.o endif diff --git a/arch/powerpc/sysdev/commproc.c b/arch/powerpc/sysdev/commproc.c new file mode 100644 index 000000000000..9b4fafd9a840 --- /dev/null +++ b/arch/powerpc/sysdev/commproc.c @@ -0,0 +1,398 @@ +/* + * General Purpose functions for the global management of the + * Communication Processor Module. + * Copyright (c) 1997 Dan error_act (dmalek@jlc.net) + * + * In addition to the individual control of the communication + * channels, there are a few functions that globally affect the + * communication processor. + * + * Buffer descriptors must be allocated from the dual ported memory + * space. The allocator for that is here. When the communication + * process is reset, we reclaim the memory available. There is + * currently no deallocator for this memory. + * The amount of space available is platform dependent. On the + * MBX, the EPPC software loads additional microcode into the + * communication processor, and uses some of the DP ram for this + * purpose. Current, the first 512 bytes and the last 256 bytes of + * memory are used. Right now I am conservative and only use the + * memory that can never be used for microcode. If there are + * applications that require more DP ram, we can expand the boundaries + * but then we have to be careful of any downloaded microcode. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define CPM_MAP_SIZE (0x4000) + +static void m8xx_cpm_dpinit(void); +static uint host_buffer; /* One page of host buffer */ +static uint host_end; /* end + 1 */ +cpm8xx_t *cpmp; /* Pointer to comm processor space */ +cpic8xx_t *cpic_reg; + +static struct device_node *cpm_pic_node; +static struct irq_host *cpm_pic_host; + +static void cpm_mask_irq(unsigned int irq) +{ + unsigned int cpm_vec = (unsigned int)irq_map[irq].hwirq; + + clrbits32(&cpic_reg->cpic_cimr, (1 << cpm_vec)); +} + +static void cpm_unmask_irq(unsigned int irq) +{ + unsigned int cpm_vec = (unsigned int)irq_map[irq].hwirq; + + setbits32(&cpic_reg->cpic_cimr, (1 << cpm_vec)); +} + +static void cpm_end_irq(unsigned int irq) +{ + unsigned int cpm_vec = (unsigned int)irq_map[irq].hwirq; + + out_be32(&cpic_reg->cpic_cisr, (1 << cpm_vec)); +} + +static struct irq_chip cpm_pic = { + .typename = " CPM PIC ", + .mask = cpm_mask_irq, + .unmask = cpm_unmask_irq, + .eoi = cpm_end_irq, +}; + +int cpm_get_irq(void) +{ + int cpm_vec; + + /* Get the vector by setting the ACK bit and then reading + * the register. + */ + out_be16(&cpic_reg->cpic_civr, 1); + cpm_vec = in_be16(&cpic_reg->cpic_civr); + cpm_vec >>= 11; + + return irq_linear_revmap(cpm_pic_host, cpm_vec); +} + +static int cpm_pic_host_match(struct irq_host *h, struct device_node *node) +{ + return cpm_pic_node == node; +} + +static int cpm_pic_host_map(struct irq_host *h, unsigned int virq, + irq_hw_number_t hw) +{ + pr_debug("cpm_pic_host_map(%d, 0x%lx)\n", virq, hw); + + get_irq_desc(virq)->status |= IRQ_LEVEL; + set_irq_chip_and_handler(virq, &cpm_pic, handle_fasteoi_irq); + return 0; +} + +/* The CPM can generate the error interrupt when there is a race condition + * between generating and masking interrupts. All we have to do is ACK it + * and return. This is a no-op function so we don't need any special + * tests in the interrupt handler. + */ +static irqreturn_t cpm_error_interrupt(int irq, void *dev) +{ + return IRQ_HANDLED; +} + +static struct irqaction cpm_error_irqaction = { + .handler = cpm_error_interrupt, + .mask = CPU_MASK_NONE, + .name = "error", +}; + +static struct irq_host_ops cpm_pic_host_ops = { + .match = cpm_pic_host_match, + .map = cpm_pic_host_map, +}; + +unsigned int cpm_pic_init(void) +{ + struct device_node *np = NULL; + struct resource res; + unsigned int sirq = NO_IRQ, hwirq, eirq; + int ret; + + pr_debug("cpm_pic_init\n"); + + np = of_find_compatible_node(NULL, "cpm-pic", "CPM"); + if (np == NULL) { + printk(KERN_ERR "CPM PIC init: can not find cpm-pic node\n"); + return sirq; + } + ret = of_address_to_resource(np, 0, &res); + if (ret) + goto end; + + cpic_reg = (void *)ioremap(res.start, res.end - res.start + 1); + if (cpic_reg == NULL) + goto end; + + sirq = irq_of_parse_and_map(np, 0); + if (sirq == NO_IRQ) + goto end; + + /* Initialize the CPM interrupt controller. */ + hwirq = (unsigned int)irq_map[sirq].hwirq; + out_be32(&cpic_reg->cpic_cicr, + (CICR_SCD_SCC4 | CICR_SCC_SCC3 | CICR_SCB_SCC2 | CICR_SCA_SCC1) | + ((hwirq/2) << 13) | CICR_HP_MASK); + + out_be32(&cpic_reg->cpic_cimr, 0); + + cpm_pic_node = of_node_get(np); + + cpm_pic_host = irq_alloc_host(IRQ_HOST_MAP_LINEAR, 64, &cpm_pic_host_ops, 64); + if (cpm_pic_host == NULL) { + printk(KERN_ERR "CPM2 PIC: failed to allocate irq host!\n"); + sirq = NO_IRQ; + goto end; + } + of_node_put(np); + + /* Install our own error handler. */ + np = of_find_node_by_type(NULL, "cpm"); + if (np == NULL) { + printk(KERN_ERR "CPM PIC init: can not find cpm node\n"); + goto end; + } + eirq= irq_of_parse_and_map(np, 0); + if (eirq == NO_IRQ) + goto end; + + if (setup_irq(eirq, &cpm_error_irqaction)) + printk(KERN_ERR "Could not allocate CPM error IRQ!"); + + setbits32(&cpic_reg->cpic_cicr, CICR_IEN); + +end: + of_node_put(np); + return sirq; +} + +void cpm_reset(void) +{ + cpm8xx_t *commproc; + sysconf8xx_t *siu_conf; + + commproc = (cpm8xx_t *)ioremap(CPM_MAP_ADDR, CPM_MAP_SIZE); + +#ifdef CONFIG_UCODE_PATCH + /* Perform a reset. + */ + out_be16(&commproc->cp_cpcr, CPM_CR_RST | CPM_CR_FLG); + + /* Wait for it. + */ + while (in_be16(&commproc->cp_cpcr) & CPM_CR_FLG); + + cpm_load_patch(commproc); +#endif + + /* Set SDMA Bus Request priority 5. + * On 860T, this also enables FEC priority 6. I am not sure + * this is what we realy want for some applications, but the + * manual recommends it. + * Bit 25, FAM can also be set to use FEC aggressive mode (860T). + */ + siu_conf = (sysconf8xx_t*)immr_map(im_siu_conf); + out_be32(&siu_conf->sc_sdcr, 1); + immr_unmap(siu_conf); + + /* Reclaim the DP memory for our use. */ + m8xx_cpm_dpinit(); + + /* Tell everyone where the comm processor resides. + */ + cpmp = commproc; +} + +/* We used to do this earlier, but have to postpone as long as possible + * to ensure the kernel VM is now running. + */ +static void +alloc_host_memory(void) +{ + dma_addr_t physaddr; + + /* Set the host page for allocation. + */ + host_buffer = (uint)dma_alloc_coherent(NULL, PAGE_SIZE, &physaddr, + GFP_KERNEL); + host_end = host_buffer + PAGE_SIZE; +} + +/* We also own one page of host buffer space for the allocation of + * UART "fifos" and the like. + */ +uint +m8xx_cpm_hostalloc(uint size) +{ + uint retloc; + + if (host_buffer == 0) + alloc_host_memory(); + + if ((host_buffer + size) >= host_end) + return(0); + + retloc = host_buffer; + host_buffer += size; + + return(retloc); +} + +/* Set a baud rate generator. This needs lots of work. There are + * four BRGs, any of which can be wired to any channel. + * The internal baud rate clock is the system clock divided by 16. + * This assumes the baudrate is 16x oversampled by the uart. + */ +#define BRG_INT_CLK (get_brgfreq()) +#define BRG_UART_CLK (BRG_INT_CLK/16) +#define BRG_UART_CLK_DIV16 (BRG_UART_CLK/16) + +void +cpm_setbrg(uint brg, uint rate) +{ + volatile uint *bp; + + /* This is good enough to get SMCs running..... + */ + bp = (uint *)&cpmp->cp_brgc1; + bp += brg; + /* The BRG has a 12-bit counter. For really slow baud rates (or + * really fast processors), we may have to further divide by 16. + */ + if (((BRG_UART_CLK / rate) - 1) < 4096) + *bp = (((BRG_UART_CLK / rate) - 1) << 1) | CPM_BRG_EN; + else + *bp = (((BRG_UART_CLK_DIV16 / rate) - 1) << 1) | + CPM_BRG_EN | CPM_BRG_DIV16; +} + +/* + * dpalloc / dpfree bits. + */ +static spinlock_t cpm_dpmem_lock; +/* + * 16 blocks should be enough to satisfy all requests + * until the memory subsystem goes up... + */ +static rh_block_t cpm_boot_dpmem_rh_block[16]; +static rh_info_t cpm_dpmem_info; + +#define CPM_DPMEM_ALIGNMENT 8 +static u8* dpram_vbase; +static uint dpram_pbase; + +void m8xx_cpm_dpinit(void) +{ + spin_lock_init(&cpm_dpmem_lock); + + dpram_vbase = immr_map_size(im_cpm.cp_dpmem, CPM_DATAONLY_BASE + CPM_DATAONLY_SIZE); + dpram_pbase = (uint)&((immap_t *)IMAP_ADDR)->im_cpm.cp_dpmem; + + /* Initialize the info header */ + rh_init(&cpm_dpmem_info, CPM_DPMEM_ALIGNMENT, + sizeof(cpm_boot_dpmem_rh_block) / + sizeof(cpm_boot_dpmem_rh_block[0]), + cpm_boot_dpmem_rh_block); + + /* + * Attach the usable dpmem area. + * XXX: This is actually crap. CPM_DATAONLY_BASE and + * CPM_DATAONLY_SIZE are a subset of the available dparm. It varies + * with the processor and the microcode patches applied / activated. + * But the following should be at least safe. + */ + rh_attach_region(&cpm_dpmem_info, (void *)CPM_DATAONLY_BASE, CPM_DATAONLY_SIZE); +} + +/* + * Allocate the requested size worth of DP memory. + * This function returns an offset into the DPRAM area. + * Use cpm_dpram_addr() to get the virtual address of the area. + */ +uint cpm_dpalloc(uint size, uint align) +{ + void *start; + unsigned long flags; + + spin_lock_irqsave(&cpm_dpmem_lock, flags); + cpm_dpmem_info.alignment = align; + start = rh_alloc(&cpm_dpmem_info, size, "commproc"); + spin_unlock_irqrestore(&cpm_dpmem_lock, flags); + + return (uint)start; +} +EXPORT_SYMBOL(cpm_dpalloc); + +int cpm_dpfree(uint offset) +{ + int ret; + unsigned long flags; + + spin_lock_irqsave(&cpm_dpmem_lock, flags); + ret = rh_free(&cpm_dpmem_info, (void *)offset); + spin_unlock_irqrestore(&cpm_dpmem_lock, flags); + + return ret; +} +EXPORT_SYMBOL(cpm_dpfree); + +uint cpm_dpalloc_fixed(uint offset, uint size, uint align) +{ + void *start; + unsigned long flags; + + spin_lock_irqsave(&cpm_dpmem_lock, flags); + cpm_dpmem_info.alignment = align; + start = rh_alloc_fixed(&cpm_dpmem_info, (void *)offset, size, "commproc"); + spin_unlock_irqrestore(&cpm_dpmem_lock, flags); + + return (uint)start; +} +EXPORT_SYMBOL(cpm_dpalloc_fixed); + +void cpm_dpdump(void) +{ + rh_dump(&cpm_dpmem_info); +} +EXPORT_SYMBOL(cpm_dpdump); + +void *cpm_dpram_addr(uint offset) +{ + return (void *)(dpram_vbase + offset); +} +EXPORT_SYMBOL(cpm_dpram_addr); + +uint cpm_dpram_phys(u8* addr) +{ + return (dpram_pbase + (uint)(addr - dpram_vbase)); +} +EXPORT_SYMBOL(cpm_dpram_addr); diff --git a/arch/powerpc/sysdev/micropatch.c b/arch/powerpc/sysdev/micropatch.c new file mode 100644 index 000000000000..712b10a55f87 --- /dev/null +++ b/arch/powerpc/sysdev/micropatch.c @@ -0,0 +1,743 @@ + +/* Microcode patches for the CPM as supplied by Motorola. + * This is the one for IIC/SPI. There is a newer one that + * also relocates SMC2, but this would require additional changes + * to uart.c, so I am holding off on that for a moment. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * I2C/SPI relocation patch arrays. + */ + +#ifdef CONFIG_I2C_SPI_UCODE_PATCH + +uint patch_2000[] = { + 0x7FFFEFD9, + 0x3FFD0000, + 0x7FFB49F7, + 0x7FF90000, + 0x5FEFADF7, + 0x5F89ADF7, + 0x5FEFAFF7, + 0x5F89AFF7, + 0x3A9CFBC8, + 0xE7C0EDF0, + 0x77C1E1BB, + 0xF4DC7F1D, + 0xABAD932F, + 0x4E08FDCF, + 0x6E0FAFF8, + 0x7CCF76CF, + 0xFD1FF9CF, + 0xABF88DC6, + 0xAB5679F7, + 0xB0937383, + 0xDFCE79F7, + 0xB091E6BB, + 0xE5BBE74F, + 0xB3FA6F0F, + 0x6FFB76CE, + 0xEE0DF9CF, + 0x2BFBEFEF, + 0xCFEEF9CF, + 0x76CEAD24, + 0x90B2DF9A, + 0x7FDDD0BF, + 0x4BF847FD, + 0x7CCF76CE, + 0xCFEF7E1F, + 0x7F1D7DFD, + 0xF0B6EF71, + 0x7FC177C1, + 0xFBC86079, + 0xE722FBC8, + 0x5FFFDFFF, + 0x5FB2FFFB, + 0xFBC8F3C8, + 0x94A67F01, + 0x7F1D5F39, + 0xAFE85F5E, + 0xFFDFDF96, + 0xCB9FAF7D, + 0x5FC1AFED, + 0x8C1C5FC1, + 0xAFDD5FC3, + 0xDF9A7EFD, + 0xB0B25FB2, + 0xFFFEABAD, + 0x5FB2FFFE, + 0x5FCE600B, + 0xE6BB600B, + 0x5FCEDFC6, + 0x27FBEFDF, + 0x5FC8CFDE, + 0x3A9CE7C0, + 0xEDF0F3C8, + 0x7F0154CD, + 0x7F1D2D3D, + 0x363A7570, + 0x7E0AF1CE, + 0x37EF2E68, + 0x7FEE10EC, + 0xADF8EFDE, + 0xCFEAE52F, + 0x7D0FE12B, + 0xF1CE5F65, + 0x7E0A4DF8, + 0xCFEA5F72, + 0x7D0BEFEE, + 0xCFEA5F74, + 0xE522EFDE, + 0x5F74CFDA, + 0x0B627385, + 0xDF627E0A, + 0x30D8145B, + 0xBFFFF3C8, + 0x5FFFDFFF, + 0xA7F85F5E, + 0xBFFE7F7D, + 0x10D31450, + 0x5F36BFFF, + 0xAF785F5E, + 0xBFFDA7F8, + 0x5F36BFFE, + 0x77FD30C0, + 0x4E08FDCF, + 0xE5FF6E0F, + 0xAFF87E1F, + 0x7E0FFD1F, + 0xF1CF5F1B, + 0xABF80D5E, + 0x5F5EFFEF, + 0x79F730A2, + 0xAFDD5F34, + 0x47F85F34, + 0xAFED7FDD, + 0x50B24978, + 0x47FD7F1D, + 0x7DFD70AD, + 0xEF717EC1, + 0x6BA47F01, + 0x2D267EFD, + 0x30DE5F5E, + 0xFFFD5F5E, + 0xFFEF5F5E, + 0xFFDF0CA0, + 0xAFED0A9E, + 0xAFDD0C3A, + 0x5F3AAFBD, + 0x7FBDB082, + 0x5F8247F8 +}; + +uint patch_2f00[] = { + 0x3E303430, + 0x34343737, + 0xABF7BF9B, + 0x994B4FBD, + 0xBD599493, + 0x349FFF37, + 0xFB9B177D, + 0xD9936956, + 0xBBFDD697, + 0xBDD2FD11, + 0x31DB9BB3, + 0x63139637, + 0x93733693, + 0x193137F7, + 0x331737AF, + 0x7BB9B999, + 0xBB197957, + 0x7FDFD3D5, + 0x73B773F7, + 0x37933B99, + 0x1D115316, + 0x99315315, + 0x31694BF4, + 0xFBDBD359, + 0x31497353, + 0x76956D69, + 0x7B9D9693, + 0x13131979, + 0x79376935 +}; +#endif + +/* + * I2C/SPI/SMC1 relocation patch arrays. + */ + +#ifdef CONFIG_I2C_SPI_SMC1_UCODE_PATCH + +uint patch_2000[] = { + 0x3fff0000, + 0x3ffd0000, + 0x3ffb0000, + 0x3ff90000, + 0x5f13eff8, + 0x5eb5eff8, + 0x5f88adf7, + 0x5fefadf7, + 0x3a9cfbc8, + 0x77cae1bb, + 0xf4de7fad, + 0xabae9330, + 0x4e08fdcf, + 0x6e0faff8, + 0x7ccf76cf, + 0xfdaff9cf, + 0xabf88dc8, + 0xab5879f7, + 0xb0925d8d, + 0xdfd079f7, + 0xb090e6bb, + 0xe5bbe74f, + 0x9e046f0f, + 0x6ffb76ce, + 0xee0cf9cf, + 0x2bfbefef, + 0xcfeef9cf, + 0x76cead23, + 0x90b3df99, + 0x7fddd0c1, + 0x4bf847fd, + 0x7ccf76ce, + 0xcfef77ca, + 0x7eaf7fad, + 0x7dfdf0b7, + 0xef7a7fca, + 0x77cafbc8, + 0x6079e722, + 0xfbc85fff, + 0xdfff5fb3, + 0xfffbfbc8, + 0xf3c894a5, + 0xe7c9edf9, + 0x7f9a7fad, + 0x5f36afe8, + 0x5f5bffdf, + 0xdf95cb9e, + 0xaf7d5fc3, + 0xafed8c1b, + 0x5fc3afdd, + 0x5fc5df99, + 0x7efdb0b3, + 0x5fb3fffe, + 0xabae5fb3, + 0xfffe5fd0, + 0x600be6bb, + 0x600b5fd0, + 0xdfc827fb, + 0xefdf5fca, + 0xcfde3a9c, + 0xe7c9edf9, + 0xf3c87f9e, + 0x54ca7fed, + 0x2d3a3637, + 0x756f7e9a, + 0xf1ce37ef, + 0x2e677fee, + 0x10ebadf8, + 0xefdecfea, + 0xe52f7d9f, + 0xe12bf1ce, + 0x5f647e9a, + 0x4df8cfea, + 0x5f717d9b, + 0xefeecfea, + 0x5f73e522, + 0xefde5f73, + 0xcfda0b61, + 0x5d8fdf61, + 0xe7c9edf9, + 0x7e9a30d5, + 0x1458bfff, + 0xf3c85fff, + 0xdfffa7f8, + 0x5f5bbffe, + 0x7f7d10d0, + 0x144d5f33, + 0xbfffaf78, + 0x5f5bbffd, + 0xa7f85f33, + 0xbffe77fd, + 0x30bd4e08, + 0xfdcfe5ff, + 0x6e0faff8, + 0x7eef7e9f, + 0xfdeff1cf, + 0x5f17abf8, + 0x0d5b5f5b, + 0xffef79f7, + 0x309eafdd, + 0x5f3147f8, + 0x5f31afed, + 0x7fdd50af, + 0x497847fd, + 0x7f9e7fed, + 0x7dfd70a9, + 0xef7e7ece, + 0x6ba07f9e, + 0x2d227efd, + 0x30db5f5b, + 0xfffd5f5b, + 0xffef5f5b, + 0xffdf0c9c, + 0xafed0a9a, + 0xafdd0c37, + 0x5f37afbd, + 0x7fbdb081, + 0x5f8147f8, + 0x3a11e710, + 0xedf0ccdd, + 0xf3186d0a, + 0x7f0e5f06, + 0x7fedbb38, + 0x3afe7468, + 0x7fedf4fc, + 0x8ffbb951, + 0xb85f77fd, + 0xb0df5ddd, + 0xdefe7fed, + 0x90e1e74d, + 0x6f0dcbf7, + 0xe7decfed, + 0xcb74cfed, + 0xcfeddf6d, + 0x91714f74, + 0x5dd2deef, + 0x9e04e7df, + 0xefbb6ffb, + 0xe7ef7f0e, + 0x9e097fed, + 0xebdbeffa, + 0xeb54affb, + 0x7fea90d7, + 0x7e0cf0c3, + 0xbffff318, + 0x5fffdfff, + 0xac59efea, + 0x7fce1ee5, + 0xe2ff5ee1, + 0xaffbe2ff, + 0x5ee3affb, + 0xf9cc7d0f, + 0xaef8770f, + 0x7d0fb0c6, + 0xeffbbfff, + 0xcfef5ede, + 0x7d0fbfff, + 0x5ede4cf8, + 0x7fddd0bf, + 0x49f847fd, + 0x7efdf0bb, + 0x7fedfffd, + 0x7dfdf0b7, + 0xef7e7e1e, + 0x5ede7f0e, + 0x3a11e710, + 0xedf0ccab, + 0xfb18ad2e, + 0x1ea9bbb8, + 0x74283b7e, + 0x73c2e4bb, + 0x2ada4fb8, + 0xdc21e4bb, + 0xb2a1ffbf, + 0x5e2c43f8, + 0xfc87e1bb, + 0xe74ffd91, + 0x6f0f4fe8, + 0xc7ba32e2, + 0xf396efeb, + 0x600b4f78, + 0xe5bb760b, + 0x53acaef8, + 0x4ef88b0e, + 0xcfef9e09, + 0xabf8751f, + 0xefef5bac, + 0x741f4fe8, + 0x751e760d, + 0x7fdbf081, + 0x741cafce, + 0xefcc7fce, + 0x751e70ac, + 0x741ce7bb, + 0x3372cfed, + 0xafdbefeb, + 0xe5bb760b, + 0x53f2aef8, + 0xafe8e7eb, + 0x4bf8771e, + 0x7e247fed, + 0x4fcbe2cc, + 0x7fbc30a9, + 0x7b0f7a0f, + 0x34d577fd, + 0x308b5db7, + 0xde553e5f, + 0xaf78741f, + 0x741f30f0, + 0xcfef5e2c, + 0x741f3eac, + 0xafb8771e, + 0x5e677fed, + 0x0bd3e2cc, + 0x741ccfec, + 0xe5ca53cd, + 0x6fcb4f74, + 0x5dadde4b, + 0x2ab63d38, + 0x4bb3de30, + 0x751f741c, + 0x6c42effa, + 0xefea7fce, + 0x6ffc30be, + 0xefec3fca, + 0x30b3de2e, + 0xadf85d9e, + 0xaf7daefd, + 0x5d9ede2e, + 0x5d9eafdd, + 0x761f10ac, + 0x1da07efd, + 0x30adfffe, + 0x4908fb18, + 0x5fffdfff, + 0xafbb709b, + 0x4ef85e67, + 0xadf814ad, + 0x7a0f70ad, + 0xcfef50ad, + 0x7a0fde30, + 0x5da0afed, + 0x3c12780f, + 0xefef780f, + 0xefef790f, + 0xa7f85e0f, + 0xffef790f, + 0xefef790f, + 0x14adde2e, + 0x5d9eadfd, + 0x5e2dfffb, + 0xe79addfd, + 0xeff96079, + 0x607ae79a, + 0xddfceff9, + 0x60795dff, + 0x607acfef, + 0xefefefdf, + 0xefbfef7f, + 0xeeffedff, + 0xebffe7ff, + 0xafefafdf, + 0xafbfaf7f, + 0xaeffadff, + 0xabffa7ff, + 0x6fef6fdf, + 0x6fbf6f7f, + 0x6eff6dff, + 0x6bff67ff, + 0x2fef2fdf, + 0x2fbf2f7f, + 0x2eff2dff, + 0x2bff27ff, + 0x4e08fd1f, + 0xe5ff6e0f, + 0xaff87eef, + 0x7e0ffdef, + 0xf11f6079, + 0xabf8f542, + 0x7e0af11c, + 0x37cfae3a, + 0x7fec90be, + 0xadf8efdc, + 0xcfeae52f, + 0x7d0fe12b, + 0xf11c6079, + 0x7e0a4df8, + 0xcfea5dc4, + 0x7d0befec, + 0xcfea5dc6, + 0xe522efdc, + 0x5dc6cfda, + 0x4e08fd1f, + 0x6e0faff8, + 0x7c1f761f, + 0xfdeff91f, + 0x6079abf8, + 0x761cee24, + 0xf91f2bfb, + 0xefefcfec, + 0xf91f6079, + 0x761c27fb, + 0xefdf5da7, + 0xcfdc7fdd, + 0xd09c4bf8, + 0x47fd7c1f, + 0x761ccfcf, + 0x7eef7fed, + 0x7dfdf093, + 0xef7e7f1e, + 0x771efb18, + 0x6079e722, + 0xe6bbe5bb, + 0xae0ae5bb, + 0x600bae85, + 0xe2bbe2bb, + 0xe2bbe2bb, + 0xaf02e2bb, + 0xe2bb2ff9, + 0x6079e2bb +}; + +uint patch_2f00[] = { + 0x30303030, + 0x3e3e3434, + 0xabbf9b99, + 0x4b4fbdbd, + 0x59949334, + 0x9fff37fb, + 0x9b177dd9, + 0x936956bb, + 0xfbdd697b, + 0xdd2fd113, + 0x1db9f7bb, + 0x36313963, + 0x79373369, + 0x3193137f, + 0x7331737a, + 0xf7bb9b99, + 0x9bb19795, + 0x77fdfd3d, + 0x573b773f, + 0x737933f7, + 0xb991d115, + 0x31699315, + 0x31531694, + 0xbf4fbdbd, + 0x35931497, + 0x35376956, + 0xbd697b9d, + 0x96931313, + 0x19797937, + 0x6935af78, + 0xb9b3baa3, + 0xb8788683, + 0x368f78f7, + 0x87778733, + 0x3ffffb3b, + 0x8e8f78b8, + 0x1d118e13, + 0xf3ff3f8b, + 0x6bd8e173, + 0xd1366856, + 0x68d1687b, + 0x3daf78b8, + 0x3a3a3f87, + 0x8f81378f, + 0xf876f887, + 0x77fd8778, + 0x737de8d6, + 0xbbf8bfff, + 0xd8df87f7, + 0xfd876f7b, + 0x8bfff8bd, + 0x8683387d, + 0xb873d87b, + 0x3b8fd7f8, + 0xf7338883, + 0xbb8ee1f8, + 0xef837377, + 0x3337b836, + 0x817d11f8, + 0x7378b878, + 0xd3368b7d, + 0xed731b7d, + 0x833731f3, + 0xf22f3f23 +}; + +uint patch_2e00[] = { + 0x27eeeeee, + 0xeeeeeeee, + 0xeeeeeeee, + 0xeeeeeeee, + 0xee4bf4fb, + 0xdbd259bb, + 0x1979577f, + 0xdfd2d573, + 0xb773f737, + 0x4b4fbdbd, + 0x25b9b177, + 0xd2d17376, + 0x956bbfdd, + 0x697bdd2f, + 0xff9f79ff, + 0xff9ff22f +}; +#endif + +/* + * USB SOF patch arrays. + */ + +#ifdef CONFIG_USB_SOF_UCODE_PATCH + +uint patch_2000[] = { + 0x7fff0000, + 0x7ffd0000, + 0x7ffb0000, + 0x49f7ba5b, + 0xba383ffb, + 0xf9b8b46d, + 0xe5ab4e07, + 0xaf77bffe, + 0x3f7bbf79, + 0xba5bba38, + 0xe7676076, + 0x60750000 +}; + +uint patch_2f00[] = { + 0x3030304c, + 0xcab9e441, + 0xa1aaf220 +}; +#endif + +void +cpm_load_patch(cpm8xx_t *cp) +{ + volatile uint *dp; /* Dual-ported RAM. */ + volatile cpm8xx_t *commproc; + volatile iic_t *iip; + volatile spi_t *spp; + volatile smc_uart_t *smp; + int i; + + commproc = cp; + +#ifdef CONFIG_USB_SOF_UCODE_PATCH + commproc->cp_rccr = 0; + + dp = (uint *)(commproc->cp_dpmem); + for (i=0; i<(sizeof(patch_2000)/4); i++) + *dp++ = patch_2000[i]; + + dp = (uint *)&(commproc->cp_dpmem[0x0f00]); + for (i=0; i<(sizeof(patch_2f00)/4); i++) + *dp++ = patch_2f00[i]; + + commproc->cp_rccr = 0x0009; + + printk("USB SOF microcode patch installed\n"); +#endif /* CONFIG_USB_SOF_UCODE_PATCH */ + +#if defined(CONFIG_I2C_SPI_UCODE_PATCH) || \ + defined(CONFIG_I2C_SPI_SMC1_UCODE_PATCH) + + commproc->cp_rccr = 0; + + dp = (uint *)(commproc->cp_dpmem); + for (i=0; i<(sizeof(patch_2000)/4); i++) + *dp++ = patch_2000[i]; + + dp = (uint *)&(commproc->cp_dpmem[0x0f00]); + for (i=0; i<(sizeof(patch_2f00)/4); i++) + *dp++ = patch_2f00[i]; + + iip = (iic_t *)&commproc->cp_dparam[PROFF_IIC]; +# define RPBASE 0x0500 + iip->iic_rpbase = RPBASE; + + /* Put SPI above the IIC, also 32-byte aligned. + */ + i = (RPBASE + sizeof(iic_t) + 31) & ~31; + spp = (spi_t *)&commproc->cp_dparam[PROFF_SPI]; + spp->spi_rpbase = i; + +# if defined(CONFIG_I2C_SPI_UCODE_PATCH) + commproc->cp_cpmcr1 = 0x802a; + commproc->cp_cpmcr2 = 0x8028; + commproc->cp_cpmcr3 = 0x802e; + commproc->cp_cpmcr4 = 0x802c; + commproc->cp_rccr = 1; + + printk("I2C/SPI microcode patch installed.\n"); +# endif /* CONFIG_I2C_SPI_UCODE_PATCH */ + +# if defined(CONFIG_I2C_SPI_SMC1_UCODE_PATCH) + + dp = (uint *)&(commproc->cp_dpmem[0x0e00]); + for (i=0; i<(sizeof(patch_2e00)/4); i++) + *dp++ = patch_2e00[i]; + + commproc->cp_cpmcr1 = 0x8080; + commproc->cp_cpmcr2 = 0x808a; + commproc->cp_cpmcr3 = 0x8028; + commproc->cp_cpmcr4 = 0x802a; + commproc->cp_rccr = 3; + + smp = (smc_uart_t *)&commproc->cp_dparam[PROFF_SMC1]; + smp->smc_rpbase = 0x1FC0; + + printk("I2C/SPI/SMC1 microcode patch installed.\n"); +# endif /* CONFIG_I2C_SPI_SMC1_UCODE_PATCH) */ + +#endif /* some variation of the I2C/SPI patch was selected */ +} + +/* + * Take this entire routine out, since no one calls it and its + * logic is suspect. + */ + +#if 0 +void +verify_patch(volatile immap_t *immr) +{ + volatile uint *dp; + volatile cpm8xx_t *commproc; + int i; + + commproc = (cpm8xx_t *)&immr->im_cpm; + + printk("cp_rccr %x\n", commproc->cp_rccr); + commproc->cp_rccr = 0; + + dp = (uint *)(commproc->cp_dpmem); + for (i=0; i<(sizeof(patch_2000)/4); i++) + if (*dp++ != patch_2000[i]) { + printk("patch_2000 bad at %d\n", i); + dp--; + printk("found 0x%X, wanted 0x%X\n", *dp, patch_2000[i]); + break; + } + + dp = (uint *)&(commproc->cp_dpmem[0x0f00]); + for (i=0; i<(sizeof(patch_2f00)/4); i++) + if (*dp++ != patch_2f00[i]) { + printk("patch_2f00 bad at %d\n", i); + dp--; + printk("found 0x%X, wanted 0x%X\n", *dp, patch_2f00[i]); + break; + } + + commproc->cp_rccr = 0x0009; +} +#endif diff --git a/arch/powerpc/sysdev/mpc8xx_pic.c b/arch/powerpc/sysdev/mpc8xx_pic.c new file mode 100644 index 000000000000..2fc2bcd79b5e --- /dev/null +++ b/arch/powerpc/sysdev/mpc8xx_pic.c @@ -0,0 +1,197 @@ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "mpc8xx_pic.h" + + +#define PIC_VEC_SPURRIOUS 15 + +extern int cpm_get_irq(struct pt_regs *regs); + +static struct device_node *mpc8xx_pic_node; +static struct irq_host *mpc8xx_pic_host; +#define NR_MASK_WORDS ((NR_IRQS + 31) / 32) +static unsigned long ppc_cached_irq_mask[NR_MASK_WORDS]; +static sysconf8xx_t *siu_reg; + +int cpm_get_irq(struct pt_regs *regs); + +static void mpc8xx_unmask_irq(unsigned int virq) +{ + int bit, word; + unsigned int irq_nr = (unsigned int)irq_map[virq].hwirq; + + bit = irq_nr & 0x1f; + word = irq_nr >> 5; + + ppc_cached_irq_mask[word] |= (1 << (31-bit)); + out_be32(&siu_reg->sc_simask, ppc_cached_irq_mask[word]); +} + +static void mpc8xx_mask_irq(unsigned int virq) +{ + int bit, word; + unsigned int irq_nr = (unsigned int)irq_map[virq].hwirq; + + bit = irq_nr & 0x1f; + word = irq_nr >> 5; + + ppc_cached_irq_mask[word] &= ~(1 << (31-bit)); + out_be32(&siu_reg->sc_simask, ppc_cached_irq_mask[word]); +} + +static void mpc8xx_ack(unsigned int virq) +{ + int bit; + unsigned int irq_nr = (unsigned int)irq_map[virq].hwirq; + + bit = irq_nr & 0x1f; + out_be32(&siu_reg->sc_sipend, 1 << (31-bit)); +} + +static void mpc8xx_end_irq(unsigned int virq) +{ + int bit, word; + unsigned int irq_nr = (unsigned int)irq_map[virq].hwirq; + + bit = irq_nr & 0x1f; + word = irq_nr >> 5; + + ppc_cached_irq_mask[word] |= (1 << (31-bit)); + out_be32(&siu_reg->sc_simask, ppc_cached_irq_mask[word]); +} + +static int mpc8xx_set_irq_type(unsigned int virq, unsigned int flow_type) +{ + struct irq_desc *desc = get_irq_desc(virq); + + desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL); + desc->status |= flow_type & IRQ_TYPE_SENSE_MASK; + if (flow_type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) + desc->status |= IRQ_LEVEL; + + if (flow_type & IRQ_TYPE_EDGE_FALLING) { + irq_hw_number_t hw = (unsigned int)irq_map[virq].hwirq; + unsigned int siel = in_be32(&siu_reg->sc_siel); + + /* only external IRQ senses are programmable */ + if ((hw & 1) == 0) { + siel |= (0x80000000 >> hw); + out_be32(&siu_reg->sc_siel, siel); + desc->handle_irq = handle_edge_irq; + } + } + return 0; +} + +static struct irq_chip mpc8xx_pic = { + .typename = " MPC8XX SIU ", + .unmask = mpc8xx_unmask_irq, + .mask = mpc8xx_mask_irq, + .ack = mpc8xx_ack, + .eoi = mpc8xx_end_irq, + .set_type = mpc8xx_set_irq_type, +}; + +unsigned int mpc8xx_get_irq(void) +{ + int irq; + + /* For MPC8xx, read the SIVEC register and shift the bits down + * to get the irq number. + */ + irq = in_be32(&siu_reg->sc_sivec) >> 26; + + if (irq == PIC_VEC_SPURRIOUS) + irq = NO_IRQ; + + return irq_linear_revmap(mpc8xx_pic_host, irq); + +} + +static int mpc8xx_pic_host_match(struct irq_host *h, struct device_node *node) +{ + return mpc8xx_pic_node == node; +} + +static int mpc8xx_pic_host_map(struct irq_host *h, unsigned int virq, + irq_hw_number_t hw) +{ + pr_debug("mpc8xx_pic_host_map(%d, 0x%lx)\n", virq, hw); + + /* Set default irq handle */ + set_irq_chip_and_handler(virq, &mpc8xx_pic, handle_level_irq); + return 0; +} + + +static int mpc8xx_pic_host_xlate(struct irq_host *h, struct device_node *ct, + u32 *intspec, unsigned int intsize, + irq_hw_number_t *out_hwirq, unsigned int *out_flags) +{ + static unsigned char map_pic_senses[4] = { + IRQ_TYPE_EDGE_RISING, + IRQ_TYPE_LEVEL_LOW, + IRQ_TYPE_LEVEL_HIGH, + IRQ_TYPE_EDGE_FALLING, + }; + + *out_hwirq = intspec[0]; + if (intsize > 1 && intspec[1] < 4) + *out_flags = map_pic_senses[intspec[1]]; + else + *out_flags = IRQ_TYPE_NONE; + + return 0; +} + + +static struct irq_host_ops mpc8xx_pic_host_ops = { + .match = mpc8xx_pic_host_match, + .map = mpc8xx_pic_host_map, + .xlate = mpc8xx_pic_host_xlate, +}; + +int mpc8xx_pic_init(void) +{ + struct resource res; + struct device_node *np = NULL; + int ret; + + np = of_find_node_by_type(np, "mpc8xx-pic"); + + if (np == NULL) { + printk(KERN_ERR "Could not find open-pic node\n"); + return -ENOMEM; + } + + mpc8xx_pic_node = of_node_get(np); + + ret = of_address_to_resource(np, 0, &res); + of_node_put(np); + if (ret) + return ret; + + siu_reg = (void *)ioremap(res.start, res.end - res.start + 1); + if (siu_reg == NULL) + return -EINVAL; + + mpc8xx_pic_host = irq_alloc_host(IRQ_HOST_MAP_LINEAR, 64, &mpc8xx_pic_host_ops, 64); + if (mpc8xx_pic_host == NULL) { + printk(KERN_ERR "MPC8xx PIC: failed to allocate irq host!\n"); + ret = -ENOMEM; + } + + return ret; +} diff --git a/arch/powerpc/sysdev/mpc8xx_pic.h b/arch/powerpc/sysdev/mpc8xx_pic.h new file mode 100644 index 000000000000..afa2ee6717c1 --- /dev/null +++ b/arch/powerpc/sysdev/mpc8xx_pic.h @@ -0,0 +1,12 @@ +#ifndef _PPC_KERNEL_MPC8xx_H +#define _PPC_KERNEL_MPC8xx_H + +#include +#include + +extern struct hw_interrupt_type mpc8xx_pic; + +int mpc8xx_pic_init(void); +unsigned int mpc8xx_get_irq(void); + +#endif /* _PPC_KERNEL_PPC8xx_H */ -- cgit v1.2.3 From df34403dcaacef541a67c955aebc37c51f53ca7c Mon Sep 17 00:00:00 2001 From: Vitaly Bordug Date: Wed, 24 Jan 2007 22:41:42 +0300 Subject: [POWERPC] 8xx: Add mpc885ads support and common mpc8xx files This adds the core 8xx stuff and specifically mpc885ads board-specific bits to arch/powerpc. Respective Kconfig has been cleaned up from the stuff not yet ported over to avoid confusion. Updated and cleaned version. Signed-off-by: Vitaly Bordug Signed-off-by: Paul Mackerras --- arch/powerpc/boot/dts/mpc885ads.dts | 185 ++++++ arch/powerpc/configs/mpc885_ads_defconfig | 827 +++++++++++++++++++++++++++ arch/powerpc/platforms/8xx/Kconfig | 300 ++-------- arch/powerpc/platforms/8xx/Makefile | 5 + arch/powerpc/platforms/8xx/m8xx_setup.c | 303 ++++++++++ arch/powerpc/platforms/8xx/mpc885ads.h | 95 +++ arch/powerpc/platforms/8xx/mpc885ads_setup.c | 387 +++++++++++++ arch/powerpc/platforms/Makefile | 1 + 8 files changed, 1846 insertions(+), 257 deletions(-) create mode 100644 arch/powerpc/boot/dts/mpc885ads.dts create mode 100644 arch/powerpc/configs/mpc885_ads_defconfig create mode 100644 arch/powerpc/platforms/8xx/Makefile create mode 100644 arch/powerpc/platforms/8xx/m8xx_setup.c create mode 100644 arch/powerpc/platforms/8xx/mpc885ads.h create mode 100644 arch/powerpc/platforms/8xx/mpc885ads_setup.c (limited to 'arch') diff --git a/arch/powerpc/boot/dts/mpc885ads.dts b/arch/powerpc/boot/dts/mpc885ads.dts new file mode 100644 index 000000000000..cf1a19f962c5 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc885ads.dts @@ -0,0 +1,185 @@ +/* + * MPC885 ADS Device Tree Source + * + * Copyright 2006 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + + +/ { + model = "MPC885ADS"; + compatible = "mpc8xx"; + #address-cells = <1>; + #size-cells = <1>; + linux,phandle = <100>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + linux,phandle = <200>; + + PowerPC,885@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <2000>; // L1, 8K + i-cache-size = <2000>; // L1, 8K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + 32-bit; + interrupts = ; // decrementer interrupt + interrupt-parent = ; + linux,phandle = <201>; + linux,boot-cpu; + }; + }; + + memory { + device_type = "memory"; + linux,phandle = <300>; + reg = <00000000 800000>; + }; + + soc885@ff000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 ff000000 00100000>; + reg = ; + bus-frequency = <0>; + mdio@e80 { + device_type = "mdio"; + compatible = "fs_enet"; + reg = ; + linux,phandle = ; + #address-cells = <1>; + #size-cells = <0>; + ethernet-phy@0 { + linux,phandle = ; + reg = <0>; + device_type = "ethernet-phy"; + }; + ethernet-phy@1 { + linux,phandle = ; + reg = <1>; + device_type = "ethernet-phy"; + }; + ethernet-phy@2 { + linux,phandle = ; + reg = <2>; + device_type = "ethernet-phy"; + }; + }; + + fec@e00 { + device_type = "network"; + compatible = "fs_enet"; + model = "FEC"; + device-id = <1>; + reg = ; + mac-address = [ 00 00 0C 00 01 FD ]; + interrupts = <3 1>; + interrupt-parent = ; + phy-handle = ; + }; + + fec@1e00 { + device_type = "network"; + compatible = "fs_enet"; + model = "FEC"; + device-id = <2>; + reg = <1e00 188>; + mac-address = [ 00 00 0C 00 02 FD ]; + interrupts = <7 1>; + interrupt-parent = ; + phy-handle = ; + }; + + pic@ff000000 { + linux,phandle = ; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0 24>; + built-in; + device_type = "mpc8xx-pic"; + compatible = "CPM"; + }; + + cpm@ff000000 { + linux,phandle = ; + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "cpm"; + model = "CPM"; + ranges = <0 0 4000>; + reg = <860 f0>; + command-proc = <9c0>; + brg-frequency = <0>; + interrupts = <0 2>; // cpm error interrupt + interrupt-parent = <930>; + + pic@930 { + linux,phandle = <930>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + interrupts = <5 2 0 2>; + interrupt-parent = ; + reg = <930 20>; + built-in; + device_type = "cpm-pic"; + compatible = "CPM"; + }; + + smc@a80 { + device_type = "serial"; + compatible = "cpm_uart"; + model = "SMC"; + device-id = <1>; + reg = ; + clock-setup = <00ffffff 0>; + rx-clock = <1>; + tx-clock = <1>; + current-speed = <0>; + interrupts = <4 3>; + interrupt-parent = <930>; + }; + + smc@a90 { + device_type = "serial"; + compatible = "cpm_uart"; + model = "SMC"; + device-id = <2>; + reg = ; + clock-setup = ; + rx-clock = <2>; + tx-clock = <2>; + current-speed = <0>; + interrupts = <3 3>; + interrupt-parent = <930>; + }; + + scc@a40 { + device_type = "network"; + compatible = "fs_enet"; + model = "SCC"; + device-id = <3>; + reg = ; + mac-address = [ 00 00 0C 00 03 FD ]; + interrupts = <1c 3>; + interrupt-parent = <930>; + phy-handle = ; + }; + }; + }; +}; diff --git a/arch/powerpc/configs/mpc885_ads_defconfig b/arch/powerpc/configs/mpc885_ads_defconfig new file mode 100644 index 000000000000..e2c17d8da4fc --- /dev/null +++ b/arch/powerpc/configs/mpc885_ads_defconfig @@ -0,0 +1,827 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.19-rc4 +# Fri Nov 10 21:30:40 2006 +# +# CONFIG_PPC64 is not set +CONFIG_PPC32=y +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +# CONFIG_PPC_UDBG_16550 is not set +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +# CONFIG_DEFAULT_UIMAGE is not set + +# +# Processor support +# +# CONFIG_CLASSIC32 is not set +# CONFIG_PPC_52xx is not set +# CONFIG_PPC_82xx is not set +# CONFIG_PPC_83xx is not set +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_86xx is not set +CONFIG_PPC_8xx=y +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_8xx=y +CONFIG_NOT_COHERENT_CACHE=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_HOTPLUG is not set +CONFIG_PRINTK=y +# CONFIG_BUG is not set +CONFIG_ELF_CORE=y +# CONFIG_BASE_FULL is not set +CONFIG_FUTEX=y +# CONFIG_EPOLL is not set +CONFIG_SHMEM=y +CONFIG_SLAB=y +# CONFIG_VM_EVENT_COUNTERS is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=1 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +# CONFIG_MODULES is not set + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_WANT_EARLY_SERIAL is not set +CONFIG_EMBEDDEDBOOT=y +# CONFIG_MPIC is not set + +# +# Platform support +# +CONFIG_CPM1=y +# CONFIG_MPC8XXFADS is not set +# CONFIG_MPC86XADS is not set +CONFIG_MPC885ADS=y + +# +# MPC8xx CPM Options +# + +# +# Generic MPC8xx Options +# +CONFIG_8xx_COPYBACK=y +# CONFIG_8xx_CPU6 is not set +CONFIG_NO_UCODE_PATCH=y +# CONFIG_USB_SOF_UCODE_PATCH is not set +# CONFIG_I2C_SPI_UCODE_PATCH is not set +# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_HZ_100 is not set +# CONFIG_HZ_250 is not set +CONFIG_HZ_1000=y +CONFIG_HZ=1000 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_MATH_EMULATION=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PROC_DEVICETREE is not set +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +# CONFIG_SECCOMP is not set +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +CONFIG_FSL_SOC=y +# CONFIG_PCI is not set +# CONFIG_PCI_DOMAINS is not set +# CONFIG_PCI_QSPAN is not set + +# +# PCCARD (PCMCIA/CardBus) support +# + +# +# PCI Hotplug Support +# + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_CONSISTENT_START=0xff100000 +CONFIG_CONSISTENT_SIZE=0x00200000 +CONFIG_BOOT_LOAD=0x00400000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +# CONFIG_TIFM_CORE is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Macintosh device drivers +# +# CONFIG_WINDFARM is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# PHY device support +# +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +CONFIG_DAVICOM_PHY=y +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +CONFIG_FIXED_PHY=y +CONFIG_FIXED_MII_10_FDX=y +# CONFIG_FIXED_MII_100_FDX is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_FEC_8XX is not set +CONFIG_FS_ENET=y +CONFIG_FS_ENET_HAS_SCC=y +CONFIG_FS_ENET_HAS_FEC=y + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_CPM=y +CONFIG_SERIAL_CPM_CONSOLE=y +# CONFIG_SERIAL_CPM_SCC1 is not set +# CONFIG_SERIAL_CPM_SCC2 is not set +# CONFIG_SERIAL_CPM_SCC3 is not set +# CONFIG_SERIAL_CPM_SCC4 is not set +CONFIG_SERIAL_CPM_SMC1=y +CONFIG_SERIAL_CPM_SMC2=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +# CONFIG_EXT2_FS_POSIX_ACL is not set +# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +# CONFIG_PROC_KCORE is not set +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Library routines +# +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y + +# +# Instrumentation Support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set +# CONFIG_UNWIND_INFO is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_BOOTX_TEXT is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig index c8c0ba3cf8e8..beea6834bb7e 100644 --- a/arch/powerpc/platforms/8xx/Kconfig +++ b/arch/powerpc/platforms/8xx/Kconfig @@ -1,105 +1,16 @@ +menu "Platform support" + depends on PPC_8xx + config FADS bool +config CPM1 + bool + choice prompt "8xx Machine Type" depends on 8xx - default RPXLITE - -config RPXLITE - bool "RPX-Lite" - ---help--- - Single-board computers based around the PowerPC MPC8xx chips and - intended for embedded applications. The following types are - supported: - - RPX-Lite: - Embedded Planet RPX Lite. PC104 form-factor SBC based on the MPC823. - - RPX-Classic: - Embedded Planet RPX Classic Low-fat. Credit-card-size SBC based on - the MPC 860 - - BSE-IP: - Bright Star Engineering ip-Engine. - - TQM823L: - TQM850L: - TQM855L: - TQM860L: - MPC8xx based family of mini modules, half credit card size, - up to 64 MB of RAM, 8 MB Flash, (Fast) Ethernet, 2 x serial ports, - 2 x CAN bus interface, ... - Manufacturer: TQ Components, www.tq-group.de - Date of Release: October (?) 1999 - End of Life: not yet :-) - URL: - - module: - - starter kit: - - images: - - FPS850L: - FingerPrint Sensor System (based on TQM850L) - Manufacturer: IKENDI AG, - Date of Release: November 1999 - End of life: end 2000 ? - URL: see TQM850L - - IVMS8: - MPC860 based board used in the "Integrated Voice Mail System", - Small Version (8 voice channels) - Manufacturer: Speech Design, - Date of Release: December 2000 (?) - End of life: - - URL: - - IVML24: - MPC860 based board used in the "Integrated Voice Mail System", - Large Version (24 voice channels) - Manufacturer: Speech Design, - Date of Release: March 2001 (?) - End of life: - - URL: - - HERMES: - Hermes-Pro ISDN/LAN router with integrated 8 x hub - Manufacturer: Multidata Gesellschaft fur Datentechnik und Informatik - - Date of Release: 2000 (?) - End of life: - - URL: - - IP860: - VMEBus IP (Industry Pack) carrier board with MPC860 - Manufacturer: MicroSys GmbH, - Date of Release: ? - End of life: - - URL: - - PCU_E: - PCU = Peripheral Controller Unit, Extended - Manufacturer: Siemens AG, ICN (Information and Communication Networks) - - Date of Release: April 2001 - End of life: August 2001 - URL: n. a. - -config RPXCLASSIC - bool "RPX-Classic" - help - The RPX-Classic is a single-board computer based on the Motorola - MPC860. It features 16MB of DRAM and a variable amount of flash, - I2C EEPROM, thermal monitoring, a PCMCIA slot, a DIP switch and two - LEDs. Variants with Ethernet ports exist. Say Y here to support it - directly. - -config BSEIP - bool "BSE-IP" - help - Say Y here to support the Bright Star Engineering ipEngine SBC. - This is a credit-card-sized device featuring a MPC823 processor, - 26MB DRAM, 4MB flash, Ethernet, a 16K-gate FPGA, USB, an LCD/video - controller, and two RS232 ports. + default MPC885ADS config MPC8XXFADS bool "FADS" @@ -107,110 +18,58 @@ config MPC8XXFADS config MPC86XADS bool "MPC86XADS" + select CPM1 help MPC86x Application Development System by Freescale Semiconductor. The MPC86xADS is meant to serve as a platform for s/w and h/w development around the MPC86X processor families. - select FADS config MPC885ADS bool "MPC885ADS" + select CPM1 help Freescale Semiconductor MPC885 Application Development System (ADS). Also known as DUET. The MPC885ADS is meant to serve as a platform for s/w and h/w development around the MPC885 processor family. -config TQM823L - bool "TQM823L" - help - Say Y here to support the TQM823L, one of an MPC8xx-based family of - mini SBCs (half credit-card size) from TQ Components first released - in late 1999. Technical references are at - , and - , and an image at - . - -config TQM850L - bool "TQM850L" - help - Say Y here to support the TQM850L, one of an MPC8xx-based family of - mini SBCs (half credit-card size) from TQ Components first released - in late 1999. Technical references are at - , and - , and an image at - . - -config TQM855L - bool "TQM855L" - help - Say Y here to support the TQM855L, one of an MPC8xx-based family of - mini SBCs (half credit-card size) from TQ Components first released - in late 1999. Technical references are at - , and - , and an image at - . - -config TQM860L - bool "TQM860L" - help - Say Y here to support the TQM860L, one of an MPC8xx-based family of - mini SBCs (half credit-card size) from TQ Components first released - in late 1999. Technical references are at - , and - , and an image at - . - -config FPS850L - bool "FPS850L" - -config IVMS8 - bool "IVMS8" - help - Say Y here to support the Integrated Voice-Mail Small 8-channel SBC - from Speech Design, released March 2001. The manufacturer's website - is at . - -config IVML24 - bool "IVML24" - help - Say Y here to support the Integrated Voice-Mail Large 24-channel SBC - from Speech Design, released March 2001. The manufacturer's website - is at . - -config HERMES_PRO - bool "HERMES" - -config IP860 - bool "IP860" - -config LWMON - bool "LWMON" - -config PCU_E - bool "PCU_E" - -config CCM - bool "CCM" - -config LANTEC - bool "LANTEC" +endchoice -config MBX - bool "MBX" - help - MBX is a line of Motorola single-board computer based around the - MPC821 and MPC860 processors, and intended for embedded-controller - applications. Say Y here to support these boards directly. +menu "Freescale Ethernet driver platform-specific options" + depends on (FS_ENET && MPC885ADS) + + config MPC8xx_SECOND_ETH + bool "Second Ethernet channel" + depends on MPC885ADS + default y + help + This enables support for second Ethernet on MPC885ADS and MPC86xADS boards. + The latter will use SCC1, for 885ADS you can select it below. + + choice + prompt "Second Ethernet channel" + depends on MPC8xx_SECOND_ETH + default MPC8xx_SECOND_ETH_FEC2 + + config MPC8xx_SECOND_ETH_FEC2 + bool "FEC2" + depends on MPC885ADS + help + Enable FEC2 to serve as 2-nd Ethernet channel. Note that SMC2 + (often 2-nd UART) will not work if this is enabled. + + config MPC8xx_SECOND_ETH_SCC3 + bool "SCC3" + depends on MPC885ADS + help + Enable SCC3 to serve as 2-nd Ethernet channel. Note that SMC1 + (often 1-nd UART) will not work if this is enabled. + + endchoice -config WINCEPT - bool "WinCept" - help - The Wincept 100/110 is a Motorola single-board computer based on the - MPC821 PowerPC, introduced in 1998 and designed to be used in - thin-client machines. Say Y to support it directly. +endmenu -endchoice +endmenu # # MPC8xx Communication options @@ -219,79 +78,6 @@ endchoice menu "MPC8xx CPM Options" depends on 8xx -config SCC_ENET - bool "CPM SCC Ethernet" - depends on NET_ETHERNET - help - Enable Ethernet support via the Motorola MPC8xx serial - communications controller. - -choice - prompt "SCC used for Ethernet" - depends on SCC_ENET - default SCC1_ENET - -config SCC1_ENET - bool "SCC1" - help - Use MPC8xx serial communications controller 1 to drive Ethernet - (default). - -config SCC2_ENET - bool "SCC2" - help - Use MPC8xx serial communications controller 2 to drive Ethernet. - -config SCC3_ENET - bool "SCC3" - help - Use MPC8xx serial communications controller 3 to drive Ethernet. - -endchoice - -config FEC_ENET - bool "860T FEC Ethernet" - depends on NET_ETHERNET - help - Enable Ethernet support via the Fast Ethernet Controller (FCC) on - the Motorola MPC8260. - -config USE_MDIO - bool "Use MDIO for PHY configuration" - depends on FEC_ENET - help - On some boards the hardware configuration of the ethernet PHY can be - used without any software interaction over the MDIO interface, so - all MII code can be omitted. Say N here if unsure or if you don't - need link status reports. - -config FEC_AM79C874 - bool "Support AMD79C874 PHY" - depends on USE_MDIO - -config FEC_LXT970 - bool "Support LXT970 PHY" - depends on USE_MDIO - -config FEC_LXT971 - bool "Support LXT971 PHY" - depends on USE_MDIO - -config FEC_QS6612 - bool "Support QS6612 PHY" - depends on USE_MDIO - -config ENET_BIG_BUFFERS - bool "Use Big CPM Ethernet Buffers" - depends on SCC_ENET || FEC_ENET - help - Allocate large buffers for MPC8xx Ethernet. Increases throughput - and decreases the likelihood of dropped packets, but costs memory. - -config HTDMSOUND - bool "Embedded Planet HIOX Audio" - depends on SOUND=y - # This doesn't really belong here, but it is convenient to ask # 8xx specific questions. comment "Generic MPC8xx Options" diff --git a/arch/powerpc/platforms/8xx/Makefile b/arch/powerpc/platforms/8xx/Makefile new file mode 100644 index 000000000000..1b59ffa92521 --- /dev/null +++ b/arch/powerpc/platforms/8xx/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the PowerPC 8xx linux kernel. +# +obj-$(CONFIG_PPC_8xx) += m8xx_setup.o +obj-$(CONFIG_MPC885ADS) += mpc885ads_setup.o diff --git a/arch/powerpc/platforms/8xx/m8xx_setup.c b/arch/powerpc/platforms/8xx/m8xx_setup.c new file mode 100644 index 000000000000..9ed7125f0150 --- /dev/null +++ b/arch/powerpc/platforms/8xx/m8xx_setup.c @@ -0,0 +1,303 @@ +/* + * Copyright (C) 1995 Linus Torvalds + * Adapted from 'alpha' version by Gary Thomas + * Modified by Cort Dougan (cort@cs.nmt.edu) + * Modified for MBX using prep/chrp/pmac functions by Dan (dmalek@jlc.net) + * Further modified for generic 8xx by Dan. + */ + +/* + * bootup setup stuff.. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "sysdev/mpc8xx_pic.h" + +void m8xx_calibrate_decr(void); +extern void m8xx_wdt_handler_install(bd_t *bp); +extern int cpm_pic_init(void); +extern int cpm_get_irq(void); + +/* A place holder for time base interrupts, if they are ever enabled. */ +irqreturn_t timebase_interrupt(int irq, void * dev) +{ + printk ("timebase_interrupt()\n"); + + return IRQ_HANDLED; +} + +static struct irqaction tbint_irqaction = { + .handler = timebase_interrupt, + .mask = CPU_MASK_NONE, + .name = "tbint", +}; + +/* per-board overridable init_internal_rtc() function. */ +void __init __attribute__ ((weak)) +init_internal_rtc(void) +{ + sit8xx_t *sys_tmr = (sit8xx_t *) immr_map(im_sit); + + /* Disable the RTC one second and alarm interrupts. */ + clrbits16(&sys_tmr->sit_rtcsc, (RTCSC_SIE | RTCSC_ALE)); + + /* Enable the RTC */ + setbits16(&sys_tmr->sit_rtcsc, (RTCSC_RTF | RTCSC_RTE)); + immr_unmap(sys_tmr); +} + +static int __init get_freq(char *name, unsigned long *val) +{ + struct device_node *cpu; + unsigned int *fp; + int found = 0; + + /* The cpu node should have timebase and clock frequency properties */ + cpu = of_find_node_by_type(NULL, "cpu"); + + if (cpu) { + fp = (unsigned int *)get_property(cpu, name, NULL); + if (fp) { + found = 1; + *val = *fp++; + } + + of_node_put(cpu); + } + + return found; +} + +/* The decrementer counts at the system (internal) clock frequency divided by + * sixteen, or external oscillator divided by four. We force the processor + * to use system clock divided by sixteen. + */ +void __init mpc8xx_calibrate_decr(void) +{ + struct device_node *cpu; + cark8xx_t *clk_r1; + car8xx_t *clk_r2; + sitk8xx_t *sys_tmr1; + sit8xx_t *sys_tmr2; + int irq, virq; + + clk_r1 = (cark8xx_t *) immr_map(im_clkrstk); + + /* Unlock the SCCR. */ + out_be32(&clk_r1->cark_sccrk, ~KAPWR_KEY); + out_be32(&clk_r1->cark_sccrk, KAPWR_KEY); + immr_unmap(clk_r1); + + /* Force all 8xx processors to use divide by 16 processor clock. */ + clk_r2 = (car8xx_t *) immr_map(im_clkrst); + setbits32(&clk_r2->car_sccr, 0x02000000); + immr_unmap(clk_r2); + + /* Processor frequency is MHz. + */ + ppc_tb_freq = 50000000; + if (!get_freq("bus-frequency", &ppc_tb_freq)) { + printk(KERN_ERR "WARNING: Estimating decrementer frequency " + "(not found)\n"); + } + ppc_tb_freq /= 16; + ppc_proc_freq = 50000000; + if (!get_freq("clock-frequency", &ppc_proc_freq)) + printk(KERN_ERR "WARNING: Estimating processor frequency" + "(not found)\n"); + + printk("Decrementer Frequency = 0x%lx\n", ppc_tb_freq); + + /* Perform some more timer/timebase initialization. This used + * to be done elsewhere, but other changes caused it to get + * called more than once....that is a bad thing. + * + * First, unlock all of the registers we are going to modify. + * To protect them from corruption during power down, registers + * that are maintained by keep alive power are "locked". To + * modify these registers we have to write the key value to + * the key location associated with the register. + * Some boards power up with these unlocked, while others + * are locked. Writing anything (including the unlock code?) + * to the unlocked registers will lock them again. So, here + * we guarantee the registers are locked, then we unlock them + * for our use. + */ + sys_tmr1 = (sitk8xx_t *) immr_map(im_sitk); + out_be32(&sys_tmr1->sitk_tbscrk, ~KAPWR_KEY); + out_be32(&sys_tmr1->sitk_rtcsck, ~KAPWR_KEY); + out_be32(&sys_tmr1->sitk_tbk, ~KAPWR_KEY); + out_be32(&sys_tmr1->sitk_tbscrk, KAPWR_KEY); + out_be32(&sys_tmr1->sitk_rtcsck, KAPWR_KEY); + out_be32(&sys_tmr1->sitk_tbk, KAPWR_KEY); + immr_unmap(sys_tmr1); + + init_internal_rtc(); + + /* Enabling the decrementer also enables the timebase interrupts + * (or from the other point of view, to get decrementer interrupts + * we have to enable the timebase). The decrementer interrupt + * is wired into the vector table, nothing to do here for that. + */ + cpu = of_find_node_by_type(NULL, "cpu"); + virq= irq_of_parse_and_map(cpu, 0); + irq = irq_map[virq].hwirq; + + sys_tmr2 = (sit8xx_t *) immr_map(im_sit); + out_be16(&sys_tmr2->sit_tbscr, ((1 << (7 - (irq/2))) << 8) | + (TBSCR_TBF | TBSCR_TBE)); + immr_unmap(sys_tmr2); + + if (setup_irq(virq, &tbint_irqaction)) + panic("Could not allocate timer IRQ!"); + +#ifdef CONFIG_8xx_WDT + /* Install watchdog timer handler early because it might be + * already enabled by the bootloader + */ + m8xx_wdt_handler_install(binfo); +#endif +} + +/* The RTC on the MPC8xx is an internal register. + * We want to protect this during power down, so we need to unlock, + * modify, and re-lock. + */ + +int mpc8xx_set_rtc_time(struct rtc_time *tm) +{ + sitk8xx_t *sys_tmr1; + sit8xx_t *sys_tmr2; + int time; + + sys_tmr1 = (sitk8xx_t *) immr_map(im_sitk); + sys_tmr2 = (sit8xx_t *) immr_map(im_sit); + time = mktime(tm->tm_year+1900, tm->tm_mon+1, tm->tm_mday, + tm->tm_hour, tm->tm_min, tm->tm_sec); + + out_be32(&sys_tmr1->sitk_rtck, KAPWR_KEY); + out_be32(&sys_tmr2->sit_rtc, time); + out_be32(&sys_tmr1->sitk_rtck, ~KAPWR_KEY); + + immr_unmap(sys_tmr2); + immr_unmap(sys_tmr1); + return 0; +} + +void mpc8xx_get_rtc_time(struct rtc_time *tm) +{ + unsigned long data; + sit8xx_t *sys_tmr = (sit8xx_t *) immr_map(im_sit); + + /* Get time from the RTC. */ + data = in_be32(&sys_tmr->sit_rtc); + to_tm(data, tm); + tm->tm_year -= 1900; + tm->tm_mon -= 1; + immr_unmap(sys_tmr); + return; +} + +void mpc8xx_restart(char *cmd) +{ + __volatile__ unsigned char dummy; + car8xx_t * clk_r = (car8xx_t *) immr_map(im_clkrst); + + + local_irq_disable(); + + setbits32(&clk_r->car_plprcr, 0x00000080); + /* Clear the ME bit in MSR to cause checkstop on machine check + */ + mtmsr(mfmsr() & ~0x1000); + + dummy = in_8(&clk_r->res[0]); + printk("Restart failed\n"); + while(1); +} + +void mpc8xx_show_cpuinfo(struct seq_file *m) +{ + struct device_node *root; + uint memsize = total_memory; + const char *model = ""; + + seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n"); + + root = of_find_node_by_path("/"); + if (root) + model = get_property(root, "model", NULL); + seq_printf(m, "Machine\t\t: %s\n", model); + of_node_put(root); + + seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); +} + +static void cpm_cascade(unsigned int irq, struct irq_desc *desc) +{ + int cascade_irq; + + if ((cascade_irq = cpm_get_irq()) >= 0) { + struct irq_desc *cdesc = irq_desc + cascade_irq; + + generic_handle_irq(cascade_irq); + cdesc->chip->eoi(cascade_irq); + } + desc->chip->eoi(irq); +} + +/* Initialize the internal interrupt controller. The number of + * interrupts supported can vary with the processor type, and the + * 82xx family can have up to 64. + * External interrupts can be either edge or level triggered, and + * need to be initialized by the appropriate driver. + */ +void __init m8xx_pic_init(void) +{ + int irq; + + if (mpc8xx_pic_init()) { + printk(KERN_ERR "Failed interrupt 8xx controller initialization\n"); + return; + } + + irq = cpm_pic_init(); + if (irq != NO_IRQ) + set_irq_chained_handler(irq, cpm_cascade); +} diff --git a/arch/powerpc/platforms/8xx/mpc885ads.h b/arch/powerpc/platforms/8xx/mpc885ads.h new file mode 100644 index 000000000000..30cbebfe84c5 --- /dev/null +++ b/arch/powerpc/platforms/8xx/mpc885ads.h @@ -0,0 +1,95 @@ +/* + * A collection of structures, addresses, and values associated with + * the Freescale MPC885ADS board. + * Copied from the FADS stuff. + * + * Author: MontaVista Software, Inc. + * source@mvista.com + * + * 2005 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is licensed + * "as is" without any warranty of any kind, whether express or implied. + */ + +#ifdef __KERNEL__ +#ifndef __ASM_MPC885ADS_H__ +#define __ASM_MPC885ADS_H__ + +#include +#include + +/* U-Boot maps BCSR to 0xff080000 */ +#define BCSR_ADDR ((uint)0xff080000) +#define BCSR_SIZE ((uint)32) +#define BCSR0 ((uint)(BCSR_ADDR + 0x00)) +#define BCSR1 ((uint)(BCSR_ADDR + 0x04)) +#define BCSR2 ((uint)(BCSR_ADDR + 0x08)) +#define BCSR3 ((uint)(BCSR_ADDR + 0x0c)) +#define BCSR4 ((uint)(BCSR_ADDR + 0x10)) + +#define CFG_PHYDEV_ADDR ((uint)0xff0a0000) +#define BCSR5 ((uint)(CFG_PHYDEV_ADDR + 0x300)) + +#define IMAP_ADDR (get_immrbase()) +#define IMAP_SIZE ((uint)(64 * 1024)) + +#define MPC8xx_CPM_OFFSET (0x9c0) +#define CPM_MAP_ADDR (get_immrbase() + MPC8xx_CPM_OFFSET) +#define CPM_IRQ_OFFSET 16 // for compability with cpm_uart driver + +#define PCMCIA_MEM_ADDR (uint)0xff020000) +#define PCMCIA_MEM_SIZE ((uint)(64 * 1024)) + +/* Bits of interest in the BCSRs. + */ +#define BCSR1_ETHEN ((uint)0x20000000) +#define BCSR1_IRDAEN ((uint)0x10000000) +#define BCSR1_RS232EN_1 ((uint)0x01000000) +#define BCSR1_PCCEN ((uint)0x00800000) +#define BCSR1_PCCVCC0 ((uint)0x00400000) +#define BCSR1_PCCVPP0 ((uint)0x00200000) +#define BCSR1_PCCVPP1 ((uint)0x00100000) +#define BCSR1_PCCVPP_MASK (BCSR1_PCCVPP0 | BCSR1_PCCVPP1) +#define BCSR1_RS232EN_2 ((uint)0x00040000) +#define BCSR1_PCCVCC1 ((uint)0x00010000) +#define BCSR1_PCCVCC_MASK (BCSR1_PCCVCC0 | BCSR1_PCCVCC1) + +#define BCSR4_ETH10_RST ((uint)0x80000000) /* 10Base-T PHY reset*/ +#define BCSR4_USB_LO_SPD ((uint)0x04000000) +#define BCSR4_USB_VCC ((uint)0x02000000) +#define BCSR4_USB_FULL_SPD ((uint)0x00040000) +#define BCSR4_USB_EN ((uint)0x00020000) + +#define BCSR5_MII2_EN 0x40 +#define BCSR5_MII2_RST 0x20 +#define BCSR5_T1_RST 0x10 +#define BCSR5_ATM155_RST 0x08 +#define BCSR5_ATM25_RST 0x04 +#define BCSR5_MII1_EN 0x02 +#define BCSR5_MII1_RST 0x01 + +/* Interrupt level assignments */ +#define PHY_INTERRUPT SIU_IRQ7 /* PHY link change interrupt */ +#define SIU_INT_FEC1 SIU_LEVEL1 /* FEC1 interrupt */ +#define SIU_INT_FEC2 SIU_LEVEL3 /* FEC2 interrupt */ +#define FEC_INTERRUPT SIU_INT_FEC1 /* FEC interrupt */ + +/* We don't use the 8259 */ +#define NR_8259_INTS 0 + +/* CPM Ethernet through SCC3 */ +#define PA_ENET_RXD ((ushort)0x0040) +#define PA_ENET_TXD ((ushort)0x0080) +#define PE_ENET_TCLK ((uint)0x00004000) +#define PE_ENET_RCLK ((uint)0x00008000) +#define PE_ENET_TENA ((uint)0x00000010) +#define PC_ENET_CLSN ((ushort)0x0400) +#define PC_ENET_RENA ((ushort)0x0800) + +/* Control bits in the SICR to route TCLK (CLK5) and RCLK (CLK6) to + * SCC3. Also, make sure GR3 (bit 8) and SC3 (bit 9) are zero */ +#define SICR_ENET_MASK ((uint)0x00ff0000) +#define SICR_ENET_CLKRT ((uint)0x002c0000) + +#endif /* __ASM_MPC885ADS_H__ */ +#endif /* __KERNEL__ */ diff --git a/arch/powerpc/platforms/8xx/mpc885ads_setup.c b/arch/powerpc/platforms/8xx/mpc885ads_setup.c new file mode 100644 index 000000000000..c5fefdf66c0a --- /dev/null +++ b/arch/powerpc/platforms/8xx/mpc885ads_setup.c @@ -0,0 +1,387 @@ +/*arch/ppc/platforms/mpc885ads-setup.c + * + * Platform setup for the Freescale mpc885ads board + * + * Vitaly Bordug + * + * Copyright 2005 MontaVista Software Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +extern void cpm_reset(void); +extern void mpc8xx_show_cpuinfo(struct seq_file*); +extern void mpc8xx_restart(char *cmd); +extern void mpc8xx_calibrate_decr(void); +extern int mpc8xx_set_rtc_time(struct rtc_time *tm); +extern void mpc8xx_get_rtc_time(struct rtc_time *tm); +extern void m8xx_pic_init(void); +extern unsigned int mpc8xx_get_irq(void); + +static void init_smc1_uart_ioports(struct fs_uart_platform_info* fpi); +static void init_smc2_uart_ioports(struct fs_uart_platform_info* fpi); +static void init_scc3_ioports(struct fs_platform_info* ptr); + +void __init mpc885ads_board_setup(void) +{ + cpm8xx_t *cp; + unsigned int *bcsr_io; + u8 tmpval8; + +#ifdef CONFIG_FS_ENET + iop8xx_t *io_port; +#endif + + bcsr_io = ioremap(BCSR1, sizeof(unsigned long)); + cp = (cpm8xx_t *)immr_map(im_cpm); + + if (bcsr_io == NULL) { + printk(KERN_CRIT "Could not remap BCSR\n"); + return; + } +#ifdef CONFIG_SERIAL_CPM_SMC1 + clrbits32(bcsr_io, BCSR1_RS232EN_1); + clrbits32(&cp->cp_simode, 0xe0000000 >> 17); /* brg1 */ + tmpval8 = in_8(&(cp->cp_smc[0].smc_smcm)) | (SMCM_RX | SMCM_TX); + out_8(&(cp->cp_smc[0].smc_smcm), tmpval8); + clrbits16(&cp->cp_smc[0].smc_smcmr, SMCMR_REN | SMCMR_TEN); /* brg1 */ +#else + setbits32(bcsr_io,BCSR1_RS232EN_1); + out_be16(&cp->cp_smc[0].smc_smcmr, 0); + out_8(&cp->cp_smc[0].smc_smce, 0); +#endif + +#ifdef CONFIG_SERIAL_CPM_SMC2 + clrbits32(bcsr_io,BCSR1_RS232EN_2); + clrbits32(&cp->cp_simode, 0xe0000000 >> 1); + setbits32(&cp->cp_simode, 0x20000000 >> 1); /* brg2 */ + tmpval8 = in_8(&(cp->cp_smc[1].smc_smcm)) | (SMCM_RX | SMCM_TX); + out_8(&(cp->cp_smc[1].smc_smcm), tmpval8); + clrbits16(&cp->cp_smc[1].smc_smcmr, SMCMR_REN | SMCMR_TEN); + + init_smc2_uart_ioports(0); +#else + setbits32(bcsr_io,BCSR1_RS232EN_2); + out_be16(&cp->cp_smc[1].smc_smcmr, 0); + out_8(&cp->cp_smc[1].smc_smce, 0); +#endif + immr_unmap(cp); + iounmap(bcsr_io); + +#ifdef CONFIG_FS_ENET + /* use MDC for MII (common) */ + io_port = (iop8xx_t*)immr_map(im_ioport); + setbits16(&io_port->iop_pdpar, 0x0080); + clrbits16(&io_port->iop_pddir, 0x0080); + + bcsr_io = ioremap(BCSR5, sizeof(unsigned long)); + clrbits32(bcsr_io,BCSR5_MII1_EN); + clrbits32(bcsr_io,BCSR5_MII1_RST); +#ifndef CONFIG_FC_ENET_HAS_SCC + clrbits32(bcsr_io,BCSR5_MII2_EN); + clrbits32(bcsr_io,BCSR5_MII2_RST); + +#endif + iounmap(bcsr_io); + immr_unmap(io_port); + +#endif +} + + +static void init_fec1_ioports(struct fs_platform_info* ptr) +{ + cpm8xx_t *cp = (cpm8xx_t *)immr_map(im_cpm); + iop8xx_t *io_port = (iop8xx_t *)immr_map(im_ioport); + + /* configure FEC1 pins */ + setbits16(&io_port->iop_papar, 0xf830); + setbits16(&io_port->iop_padir, 0x0830); + clrbits16(&io_port->iop_padir, 0xf000); + + setbits32(&cp->cp_pbpar, 0x00001001); + clrbits32(&cp->cp_pbdir, 0x00001001); + + setbits16(&io_port->iop_pcpar, 0x000c); + clrbits16(&io_port->iop_pcdir, 0x000c); + + setbits32(&cp->cp_pepar, 0x00000003); + setbits32(&cp->cp_pedir, 0x00000003); + clrbits32(&cp->cp_peso, 0x00000003); + clrbits32(&cp->cp_cptr, 0x00000100); + + immr_unmap(io_port); + immr_unmap(cp); +} + + +static void init_fec2_ioports(struct fs_platform_info* ptr) +{ + cpm8xx_t *cp = (cpm8xx_t *)immr_map(im_cpm); + iop8xx_t *io_port = (iop8xx_t *)immr_map(im_ioport); + + /* configure FEC2 pins */ + setbits32(&cp->cp_pepar, 0x0003fffc); + setbits32(&cp->cp_pedir, 0x0003fffc); + clrbits32(&cp->cp_peso, 0x000087fc); + setbits32(&cp->cp_peso, 0x00037800); + clrbits32(&cp->cp_cptr, 0x00000080); + + immr_unmap(io_port); + immr_unmap(cp); +} + +void init_fec_ioports(struct fs_platform_info *fpi) +{ + int fec_no = fs_get_fec_index(fpi->fs_no); + + switch (fec_no) { + case 0: + init_fec1_ioports(fpi); + break; + case 1: + init_fec2_ioports(fpi); + break; + default: + printk(KERN_ERR "init_fec_ioports: invalid FEC number\n"); + return; + } +} + +static void init_scc3_ioports(struct fs_platform_info* fpi) +{ + unsigned *bcsr_io; + iop8xx_t *io_port; + cpm8xx_t *cp; + + bcsr_io = ioremap(BCSR_ADDR, BCSR_SIZE); + io_port = (iop8xx_t *)immr_map(im_ioport); + cp = (cpm8xx_t *)immr_map(im_cpm); + + if (bcsr_io == NULL) { + printk(KERN_CRIT "Could not remap BCSR\n"); + return; + } + + /* Enable the PHY. + */ + clrbits32(bcsr_io+4, BCSR4_ETH10_RST); + udelay(1000); + setbits32(bcsr_io+4, BCSR4_ETH10_RST); + /* Configure port A pins for Txd and Rxd. + */ + setbits16(&io_port->iop_papar, PA_ENET_RXD | PA_ENET_TXD); + clrbits16(&io_port->iop_padir, PA_ENET_RXD | PA_ENET_TXD); + + /* Configure port C pins to enable CLSN and RENA. + */ + clrbits16(&io_port->iop_pcpar, PC_ENET_CLSN | PC_ENET_RENA); + clrbits16(&io_port->iop_pcdir, PC_ENET_CLSN | PC_ENET_RENA); + setbits16(&io_port->iop_pcso, PC_ENET_CLSN | PC_ENET_RENA); + + /* Configure port E for TCLK and RCLK. + */ + setbits32(&cp->cp_pepar, PE_ENET_TCLK | PE_ENET_RCLK); + clrbits32(&cp->cp_pepar, PE_ENET_TENA); + clrbits32(&cp->cp_pedir, + PE_ENET_TCLK | PE_ENET_RCLK | PE_ENET_TENA); + clrbits32(&cp->cp_peso, PE_ENET_TCLK | PE_ENET_RCLK); + setbits32(&cp->cp_peso, PE_ENET_TENA); + + /* Configure Serial Interface clock routing. + * First, clear all SCC bits to zero, then set the ones we want. + */ + clrbits32(&cp->cp_sicr, SICR_ENET_MASK); + setbits32(&cp->cp_sicr, SICR_ENET_CLKRT); + + /* Disable Rx and Tx. SMC1 sshould be stopped if SCC3 eternet are used. + */ + clrbits16(&cp->cp_smc[0].smc_smcmr, SMCMR_REN | SMCMR_TEN); + /* On the MPC885ADS SCC ethernet PHY is initialized in the full duplex mode + * by H/W setting after reset. SCC ethernet controller support only half duplex. + * This discrepancy of modes causes a lot of carrier lost errors. + */ + + /* In the original SCC enet driver the following code is placed at + the end of the initialization */ + setbits32(&cp->cp_pepar, PE_ENET_TENA); + clrbits32(&cp->cp_pedir, PE_ENET_TENA); + setbits32(&cp->cp_peso, PE_ENET_TENA); + + setbits32(bcsr_io+4, BCSR1_ETHEN); + iounmap(bcsr_io); + immr_unmap(io_port); + immr_unmap(cp); +} + +void init_scc_ioports(struct fs_platform_info *fpi) +{ + int scc_no = fs_get_scc_index(fpi->fs_no); + + switch (scc_no) { + case 2: + init_scc3_ioports(fpi); + break; + default: + printk(KERN_ERR "init_scc_ioports: invalid SCC number\n"); + return; + } +} + + + +static void init_smc1_uart_ioports(struct fs_uart_platform_info* ptr) +{ + unsigned *bcsr_io; + cpm8xx_t *cp; + + cp = (cpm8xx_t *)immr_map(im_cpm); + setbits32(&cp->cp_pepar, 0x000000c0); + clrbits32(&cp->cp_pedir, 0x000000c0); + clrbits32(&cp->cp_peso, 0x00000040); + setbits32(&cp->cp_peso, 0x00000080); + immr_unmap(cp); + + bcsr_io = ioremap(BCSR1, sizeof(unsigned long)); + + if (bcsr_io == NULL) { + printk(KERN_CRIT "Could not remap BCSR1\n"); + return; + } + clrbits32(bcsr_io,BCSR1_RS232EN_1); + iounmap(bcsr_io); +} + +static void init_smc2_uart_ioports(struct fs_uart_platform_info* fpi) +{ + unsigned *bcsr_io; + cpm8xx_t *cp; + + cp = (cpm8xx_t *)immr_map(im_cpm); + setbits32(&cp->cp_pepar, 0x00000c00); + clrbits32(&cp->cp_pedir, 0x00000c00); + clrbits32(&cp->cp_peso, 0x00000400); + setbits32(&cp->cp_peso, 0x00000800); + immr_unmap(cp); + + bcsr_io = ioremap(BCSR1, sizeof(unsigned long)); + + if (bcsr_io == NULL) { + printk(KERN_CRIT "Could not remap BCSR1\n"); + return; + } + clrbits32(bcsr_io,BCSR1_RS232EN_2); + iounmap(bcsr_io); +} + +void init_smc_ioports(struct fs_uart_platform_info *data) +{ + int smc_no = fs_uart_id_fsid2smc(data->fs_no); + + switch (smc_no) { + case 0: + init_smc1_uart_ioports(data); + data->brg = data->clk_rx; + break; + case 1: + init_smc2_uart_ioports(data); + data->brg = data->clk_rx; + break; + default: + printk(KERN_ERR "init_scc_ioports: invalid SCC number\n"); + return; + } +} + +int platform_device_skip(char *model, int id) +{ +#ifdef CONFIG_MPC8xx_SECOND_ETH_SCC3 + const char *dev = "FEC"; + int n = 2; +#else + const char *dev = "SCC"; + int n = 3; +#endif + + if (!strcmp(model, dev) && n == id) + return 1; + + return 0; +} + +static void __init mpc885ads_setup_arch(void) +{ + struct device_node *cpu; + + cpu = of_find_node_by_type(NULL, "cpu"); + if (cpu != 0) { + const unsigned int *fp; + + fp = get_property(cpu, "clock-frequency", NULL); + if (fp != 0) + loops_per_jiffy = *fp / HZ; + else + loops_per_jiffy = 50000000 / HZ; + of_node_put(cpu); + } + + cpm_reset(); + + mpc885ads_board_setup(); + + ROOT_DEV = Root_NFS; +} + +static int __init mpc885ads_probe(void) +{ + char *model = of_get_flat_dt_prop(of_get_flat_dt_root(), + "model", NULL); + if (model == NULL) + return 0; + if (strcmp(model, "MPC885ADS")) + return 0; + + return 1; +} + +define_machine(mpc885_ads) { + .name = "MPC885 ADS", + .probe = mpc885ads_probe, + .setup_arch = mpc885ads_setup_arch, + .init_IRQ = m8xx_pic_init, + .show_cpuinfo = mpc8xx_show_cpuinfo, + .get_irq = mpc8xx_get_irq, + .restart = mpc8xx_restart, + .calibrate_decr = mpc8xx_calibrate_decr, + .set_rtc_time = mpc8xx_set_rtc_time, + .get_rtc_time = mpc8xx_get_rtc_time, +}; diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile index 507d1b98f270..7f03ea9ab366 100644 --- a/arch/powerpc/platforms/Makefile +++ b/arch/powerpc/platforms/Makefile @@ -8,6 +8,7 @@ endif obj-$(CONFIG_PPC_MPC52xx) += 52xx/ obj-$(CONFIG_PPC_CHRP) += chrp/ obj-$(CONFIG_4xx) += 4xx/ +obj-$(CONFIG_PPC_8xx) += 8xx/ obj-$(CONFIG_PPC_83xx) += 83xx/ obj-$(CONFIG_PPC_85xx) += 85xx/ obj-$(CONFIG_PPC_86xx) += 86xx/ -- cgit v1.2.3 From 29f1530f1958dc74f021186c9f31ed66a0c7b8ad Mon Sep 17 00:00:00 2001 From: Vitaly Bordug Date: Wed, 24 Jan 2007 22:42:10 +0300 Subject: [POWERPC] Add mpc866ads board-specific bits to arch/powerpc This add support of the Freescale mpc86xads reference board to arch/powerpc. Supported SMC1 and SMC2 (UART and serial console), FEC 100Mbps Ethernet, SCC1 Ethernet (10Mbps hdx) Signed-off-by: Vitaly Bordug Signed-off-by: Paul Mackerras --- arch/powerpc/boot/dts/mpc866ads.dts | 162 ++++++ arch/powerpc/configs/mpc866_ads_defconfig | 829 +++++++++++++++++++++++++++ arch/powerpc/platforms/8xx/Makefile | 1 + arch/powerpc/platforms/8xx/mpc86xads.h | 95 +++ arch/powerpc/platforms/8xx/mpc86xads_setup.c | 301 ++++++++++ 5 files changed, 1388 insertions(+) create mode 100644 arch/powerpc/boot/dts/mpc866ads.dts create mode 100644 arch/powerpc/configs/mpc866_ads_defconfig create mode 100644 arch/powerpc/platforms/8xx/mpc86xads.h create mode 100644 arch/powerpc/platforms/8xx/mpc86xads_setup.c (limited to 'arch') diff --git a/arch/powerpc/boot/dts/mpc866ads.dts b/arch/powerpc/boot/dts/mpc866ads.dts new file mode 100644 index 000000000000..5d4005239b83 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc866ads.dts @@ -0,0 +1,162 @@ +/* + * MPC866 ADS Device Tree Source + * + * Copyright 2006 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + + +/ { + model = "MPC866ADS"; + compatible = "mpc8xx"; + #address-cells = <1>; + #size-cells = <1>; + linux,phandle = <100>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + linux,phandle = <200>; + + PowerPC,866@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <2000>; // L1, 8K + i-cache-size = <4000>; // L1, 16K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + 32-bit; + interrupts = ; // decrementer interrupt + interrupt-parent = ; + linux,phandle = <201>; + linux,boot-cpu; + }; + }; + + memory { + device_type = "memory"; + linux,phandle = <300>; + reg = <00000000 800000>; + }; + + soc866@ff000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 ff000000 00100000>; + reg = ; + bus-frequency = <0>; + mdio@e80 { + device_type = "mdio"; + compatible = "fs_enet"; + reg = ; + linux,phandle = ; + #address-cells = <1>; + #size-cells = <0>; + ethernet-phy@f { + linux,phandle = ; + reg = ; + device_type = "ethernet-phy"; + }; + }; + + fec@e00 { + device_type = "network"; + compatible = "fs_enet"; + model = "FEC"; + device-id = <1>; + reg = ; + mac-address = [ 00 00 0C 00 01 FD ]; + interrupts = <3 1>; + interrupt-parent = ; + phy-handle = ; + }; + + pic@ff000000 { + linux,phandle = ; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0 24>; + built-in; + device_type = "mpc8xx-pic"; + compatible = "CPM"; + }; + + cpm@ff000000 { + linux,phandle = ; + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "cpm"; + model = "CPM"; + ranges = <0 0 4000>; + reg = <860 f0>; + command-proc = <9c0>; + brg-frequency = <0>; + interrupts = <0 2>; // cpm error interrupt + interrupt-parent = <930>; + + pic@930 { + linux,phandle = <930>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + interrupts = <5 2 0 2>; + interrupt-parent = ; + reg = <930 20>; + built-in; + device_type = "cpm-pic"; + compatible = "CPM"; + }; + + smc@a80 { + device_type = "serial"; + compatible = "cpm_uart"; + model = "SMC"; + device-id = <1>; + reg = ; + clock-setup = <00ffffff 0>; + rx-clock = <1>; + tx-clock = <1>; + current-speed = <0>; + interrupts = <4 3>; + interrupt-parent = <930>; + }; + + smc@a90 { + device_type = "serial"; + compatible = "cpm_uart"; + model = "SMC"; + device-id = <2>; + reg = ; + clock-setup = ; + rx-clock = <2>; + tx-clock = <2>; + current-speed = <0>; + interrupts = <3 3>; + interrupt-parent = <930>; + }; + + scc@a00 { + device_type = "network"; + compatible = "fs_enet"; + model = "SCC"; + device-id = <1>; + reg = ; + mac-address = [ 00 00 0C 00 03 FD ]; + interrupts = <1e 3>; + interrupt-parent = <930>; + }; + }; + }; +}; diff --git a/arch/powerpc/configs/mpc866_ads_defconfig b/arch/powerpc/configs/mpc866_ads_defconfig new file mode 100644 index 000000000000..539d9e3d3668 --- /dev/null +++ b/arch/powerpc/configs/mpc866_ads_defconfig @@ -0,0 +1,829 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.19-rc6 +# Fri Nov 24 21:13:55 2006 +# +# CONFIG_PPC64 is not set +CONFIG_PPC32=y +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +# CONFIG_PPC_UDBG_16550 is not set +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +# CONFIG_DEFAULT_UIMAGE is not set + +# +# Processor support +# +# CONFIG_CLASSIC32 is not set +# CONFIG_PPC_52xx is not set +# CONFIG_PPC_82xx is not set +# CONFIG_PPC_83xx is not set +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_86xx is not set +CONFIG_PPC_8xx=y +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_8xx=y +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_NOT_COHERENT_CACHE=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_HOTPLUG is not set +CONFIG_PRINTK=y +# CONFIG_BUG is not set +CONFIG_ELF_CORE=y +# CONFIG_BASE_FULL is not set +CONFIG_FUTEX=y +# CONFIG_EPOLL is not set +CONFIG_SHMEM=y +CONFIG_SLAB=y +# CONFIG_VM_EVENT_COUNTERS is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=1 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +# CONFIG_MODULES is not set + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_WANT_EARLY_SERIAL is not set +CONFIG_EMBEDDEDBOOT=y +# CONFIG_MPIC is not set + +# +# Platform support +# +CONFIG_CPM1=y +# CONFIG_MPC8XXFADS is not set +CONFIG_MPC86XADS=y +# CONFIG_MPC885ADS is not set + +# +# MPC8xx CPM Options +# + +# +# Generic MPC8xx Options +# +CONFIG_8xx_COPYBACK=y +CONFIG_8xx_CPU6=y +CONFIG_NO_UCODE_PATCH=y +# CONFIG_USB_SOF_UCODE_PATCH is not set +# CONFIG_I2C_SPI_UCODE_PATCH is not set +# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_HZ_100 is not set +# CONFIG_HZ_250 is not set +CONFIG_HZ_1000=y +CONFIG_HZ=1000 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_MATH_EMULATION=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PROC_DEVICETREE is not set +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +# CONFIG_SECCOMP is not set +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +CONFIG_FSL_SOC=y +# CONFIG_PCI is not set +# CONFIG_PCI_DOMAINS is not set +# CONFIG_PCI_QSPAN is not set + +# +# PCCARD (PCMCIA/CardBus) support +# + +# +# PCI Hotplug Support +# + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_CONSISTENT_START=0xff100000 +CONFIG_CONSISTENT_SIZE=0x00200000 +CONFIG_BOOT_LOAD=0x00400000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +# CONFIG_TIFM_CORE is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Macintosh device drivers +# +# CONFIG_WINDFARM is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# PHY device support +# +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +CONFIG_FIXED_PHY=y +CONFIG_FIXED_MII_10_FDX=y +CONFIG_FIXED_MII_100_FDX=y + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_FEC_8XX is not set +CONFIG_FS_ENET=y +CONFIG_FS_ENET_HAS_SCC=y +CONFIG_FS_ENET_HAS_FEC=y + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_CPM=y +CONFIG_SERIAL_CPM_CONSOLE=y +# CONFIG_SERIAL_CPM_SCC1 is not set +# CONFIG_SERIAL_CPM_SCC2 is not set +# CONFIG_SERIAL_CPM_SCC3 is not set +# CONFIG_SERIAL_CPM_SCC4 is not set +CONFIG_SERIAL_CPM_SMC1=y +CONFIG_SERIAL_CPM_SMC2=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +# CONFIG_EXT2_FS_POSIX_ACL is not set +# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +# CONFIG_PROC_KCORE is not set +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Library routines +# +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y + +# +# Instrumentation Support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set +# CONFIG_UNWIND_INFO is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_BOOTX_TEXT is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set diff --git a/arch/powerpc/platforms/8xx/Makefile b/arch/powerpc/platforms/8xx/Makefile index 1b59ffa92521..5e2dae3afd2f 100644 --- a/arch/powerpc/platforms/8xx/Makefile +++ b/arch/powerpc/platforms/8xx/Makefile @@ -3,3 +3,4 @@ # obj-$(CONFIG_PPC_8xx) += m8xx_setup.o obj-$(CONFIG_MPC885ADS) += mpc885ads_setup.o +obj-$(CONFIG_MPC86XADS) += mpc86xads_setup.o diff --git a/arch/powerpc/platforms/8xx/mpc86xads.h b/arch/powerpc/platforms/8xx/mpc86xads.h new file mode 100644 index 000000000000..b5d19dd0619c --- /dev/null +++ b/arch/powerpc/platforms/8xx/mpc86xads.h @@ -0,0 +1,95 @@ +/* + * A collection of structures, addresses, and values associated with + * the Freescale MPC86xADS board. + * Copied from the FADS stuff. + * + * Author: MontaVista Software, Inc. + * source@mvista.com + * + * 2005 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is licensed + * "as is" without any warranty of any kind, whether express or implied. + */ + +#ifdef __KERNEL__ +#ifndef __ASM_MPC86XADS_H__ +#define __ASM_MPC86XADS_H__ + +#include +#include + +/* U-Boot maps BCSR to 0xff080000 */ +#define BCSR_ADDR ((uint)0xff080000) +#define BCSR_SIZE ((uint)32) +#define BCSR0 ((uint)(BCSR_ADDR + 0x00)) +#define BCSR1 ((uint)(BCSR_ADDR + 0x04)) +#define BCSR2 ((uint)(BCSR_ADDR + 0x08)) +#define BCSR3 ((uint)(BCSR_ADDR + 0x0c)) +#define BCSR4 ((uint)(BCSR_ADDR + 0x10)) + +#define CFG_PHYDEV_ADDR ((uint)0xff0a0000) +#define BCSR5 ((uint)(CFG_PHYDEV_ADDR + 0x300)) + +#define IMAP_ADDR (get_immrbase()) +#define IMAP_SIZE ((uint)(64 * 1024)) + +#define MPC8xx_CPM_OFFSET (0x9c0) +#define CPM_MAP_ADDR (get_immrbase() + MPC8xx_CPM_OFFSET) +#define CPM_IRQ_OFFSET 16 // for compability with cpm_uart driver + +#define PCMCIA_MEM_ADDR (uint)0xff020000) +#define PCMCIA_MEM_SIZE ((uint)(64 * 1024)) + +/* Bits of interest in the BCSRs. + */ +#define BCSR1_ETHEN ((uint)0x20000000) +#define BCSR1_IRDAEN ((uint)0x10000000) +#define BCSR1_RS232EN_1 ((uint)0x01000000) +#define BCSR1_PCCEN ((uint)0x00800000) +#define BCSR1_PCCVCC0 ((uint)0x00400000) +#define BCSR1_PCCVPP0 ((uint)0x00200000) +#define BCSR1_PCCVPP1 ((uint)0x00100000) +#define BCSR1_PCCVPP_MASK (BCSR1_PCCVPP0 | BCSR1_PCCVPP1) +#define BCSR1_RS232EN_2 ((uint)0x00040000) +#define BCSR1_PCCVCC1 ((uint)0x00010000) +#define BCSR1_PCCVCC_MASK (BCSR1_PCCVCC0 | BCSR1_PCCVCC1) + +#define BCSR4_ETH10_RST ((uint)0x80000000) /* 10Base-T PHY reset*/ +#define BCSR4_USB_LO_SPD ((uint)0x04000000) +#define BCSR4_USB_VCC ((uint)0x02000000) +#define BCSR4_USB_FULL_SPD ((uint)0x00040000) +#define BCSR4_USB_EN ((uint)0x00020000) + +#define BCSR5_MII2_EN 0x40 +#define BCSR5_MII2_RST 0x20 +#define BCSR5_T1_RST 0x10 +#define BCSR5_ATM155_RST 0x08 +#define BCSR5_ATM25_RST 0x04 +#define BCSR5_MII1_EN 0x02 +#define BCSR5_MII1_RST 0x01 + +/* Interrupt level assignments */ +#define PHY_INTERRUPT SIU_IRQ7 /* PHY link change interrupt */ +#define SIU_INT_FEC1 SIU_LEVEL1 /* FEC1 interrupt */ +#define FEC_INTERRUPT SIU_INT_FEC1 /* FEC interrupt */ + +/* We don't use the 8259 */ +#define NR_8259_INTS 0 + +/* CPM Ethernet through SCC1 */ +#define PA_ENET_RXD ((ushort)0x0001) +#define PA_ENET_TXD ((ushort)0x0002) +#define PA_ENET_TCLK ((ushort)0x0100) +#define PA_ENET_RCLK ((ushort)0x0200) +#define PB_ENET_TENA ((uint)0x00001000) +#define PC_ENET_CLSN ((ushort)0x0010) +#define PC_ENET_RENA ((ushort)0x0020) + +/* Control bits in the SICR to route TCLK (CLK1) and RCLK (CLK2) to + * SCC1. Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero. + */ +#define SICR_ENET_MASK ((uint)0x000000ff) +#define SICR_ENET_CLKRT ((uint)0x0000002c) + +#endif /* __ASM_MPC86XADS_H__ */ +#endif /* __KERNEL__ */ diff --git a/arch/powerpc/platforms/8xx/mpc86xads_setup.c b/arch/powerpc/platforms/8xx/mpc86xads_setup.c new file mode 100644 index 000000000000..ef52ce701b0e --- /dev/null +++ b/arch/powerpc/platforms/8xx/mpc86xads_setup.c @@ -0,0 +1,301 @@ +/*arch/ppc/platforms/mpc86xads-setup.c + * + * Platform setup for the Freescale mpc86xads board + * + * Vitaly Bordug + * + * Copyright 2005 MontaVista Software Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +extern void cpm_reset(void); +extern void mpc8xx_show_cpuinfo(struct seq_file*); +extern void mpc8xx_restart(char *cmd); +extern void mpc8xx_calibrate_decr(void); +extern int mpc8xx_set_rtc_time(struct rtc_time *tm); +extern void mpc8xx_get_rtc_time(struct rtc_time *tm); +extern void m8xx_pic_init(void); +extern unsigned int mpc8xx_get_irq(void); + +static void init_smc1_uart_ioports(struct fs_uart_platform_info* fpi); +static void init_smc2_uart_ioports(struct fs_uart_platform_info* fpi); +static void init_scc1_ioports(struct fs_platform_info* ptr); + +void __init mpc86xads_board_setup(void) +{ + cpm8xx_t *cp; + unsigned int *bcsr_io; + u8 tmpval8; + + bcsr_io = ioremap(BCSR1, sizeof(unsigned long)); + cp = (cpm8xx_t *)immr_map(im_cpm); + + if (bcsr_io == NULL) { + printk(KERN_CRIT "Could not remap BCSR\n"); + return; + } +#ifdef CONFIG_SERIAL_CPM_SMC1 + clrbits32(bcsr_io, BCSR1_RS232EN_1); + clrbits32(&cp->cp_simode, 0xe0000000 >> 17); /* brg1 */ + tmpval8 = in_8(&(cp->cp_smc[0].smc_smcm)) | (SMCM_RX | SMCM_TX); + out_8(&(cp->cp_smc[0].smc_smcm), tmpval8); + clrbits16(&cp->cp_smc[0].smc_smcmr, SMCMR_REN | SMCMR_TEN); +#else + setbits32(bcsr_io,BCSR1_RS232EN_1); + out_be16(&cp->cp_smc[0].smc_smcmr, 0); + out_8(&cp->cp_smc[0].smc_smce, 0); +#endif + +#ifdef CONFIG_SERIAL_CPM_SMC2 + clrbits32(bcsr_io,BCSR1_RS232EN_2); + clrbits32(&cp->cp_simode, 0xe0000000 >> 1); + setbits32(&cp->cp_simode, 0x20000000 >> 1); /* brg2 */ + tmpval8 = in_8(&(cp->cp_smc[1].smc_smcm)) | (SMCM_RX | SMCM_TX); + out_8(&(cp->cp_smc[1].smc_smcm), tmpval8); + clrbits16(&cp->cp_smc[1].smc_smcmr, SMCMR_REN | SMCMR_TEN); + + init_smc2_uart_ioports(0); +#else + setbits32(bcsr_io,BCSR1_RS232EN_2); + out_be16(&cp->cp_smc[1].smc_smcmr, 0); + out_8(&cp->cp_smc[1].smc_smce, 0); +#endif + immr_unmap(cp); + iounmap(bcsr_io); +} + + +static void init_fec1_ioports(struct fs_platform_info* ptr) +{ + iop8xx_t *io_port = (iop8xx_t *)immr_map(im_ioport); + + /* configure FEC1 pins */ + + setbits16(&io_port->iop_pdpar, 0x1fff); + setbits16(&io_port->iop_pddir, 0x1fff); + + immr_unmap(io_port); +} + +void init_fec_ioports(struct fs_platform_info *fpi) +{ + int fec_no = fs_get_fec_index(fpi->fs_no); + + switch (fec_no) { + case 0: + init_fec1_ioports(fpi); + break; + default: + printk(KERN_ERR "init_fec_ioports: invalid FEC number\n"); + return; + } +} + +static void init_scc1_ioports(struct fs_platform_info* fpi) +{ + unsigned *bcsr_io; + iop8xx_t *io_port; + cpm8xx_t *cp; + + bcsr_io = ioremap(BCSR_ADDR, BCSR_SIZE); + io_port = (iop8xx_t *)immr_map(im_ioport); + cp = (cpm8xx_t *)immr_map(im_cpm); + + if (bcsr_io == NULL) { + printk(KERN_CRIT "Could not remap BCSR\n"); + return; + } + + /* Configure port A pins for Txd and Rxd. + */ + setbits16(&io_port->iop_papar, PA_ENET_RXD | PA_ENET_TXD); + clrbits16(&io_port->iop_padir, PA_ENET_RXD | PA_ENET_TXD); + clrbits16(&io_port->iop_paodr, PA_ENET_TXD); + + /* Configure port C pins to enable CLSN and RENA. + */ + clrbits16(&io_port->iop_pcpar, PC_ENET_CLSN | PC_ENET_RENA); + clrbits16(&io_port->iop_pcdir, PC_ENET_CLSN | PC_ENET_RENA); + setbits16(&io_port->iop_pcso, PC_ENET_CLSN | PC_ENET_RENA); + + /* Configure port A for TCLK and RCLK. + */ + setbits16(&io_port->iop_papar, PA_ENET_TCLK | PA_ENET_RCLK); + clrbits16(&io_port->iop_padir, PA_ENET_TCLK | PA_ENET_RCLK); + clrbits32(&cp->cp_pbpar, PB_ENET_TENA); + clrbits32(&cp->cp_pbdir, PB_ENET_TENA); + + /* Configure Serial Interface clock routing. + * First, clear all SCC bits to zero, then set the ones we want. + */ + clrbits32(&cp->cp_sicr, SICR_ENET_MASK); + setbits32(&cp->cp_sicr, SICR_ENET_CLKRT); + + /* In the original SCC enet driver the following code is placed at + the end of the initialization */ + setbits32(&cp->cp_pbpar, PB_ENET_TENA); + setbits32(&cp->cp_pbdir, PB_ENET_TENA); + + clrbits32(bcsr_io+1, BCSR1_ETHEN); + iounmap(bcsr_io); + immr_unmap(cp); + immr_unmap(io_port); +} + +void init_scc_ioports(struct fs_platform_info *fpi) +{ + int scc_no = fs_get_scc_index(fpi->fs_no); + + switch (scc_no) { + case 0: + init_scc1_ioports(fpi); + break; + default: + printk(KERN_ERR "init_scc_ioports: invalid SCC number\n"); + return; + } +} + + + +static void init_smc1_uart_ioports(struct fs_uart_platform_info* ptr) +{ + unsigned *bcsr_io; + cpm8xx_t *cp = (cpm8xx_t *)immr_map(im_cpm); + + setbits32(&cp->cp_pbpar, 0x000000c0); + clrbits32(&cp->cp_pbdir, 0x000000c0); + clrbits16(&cp->cp_pbodr, 0x00c0); + immr_unmap(cp); + + bcsr_io = ioremap(BCSR1, sizeof(unsigned long)); + + if (bcsr_io == NULL) { + printk(KERN_CRIT "Could not remap BCSR1\n"); + return; + } + clrbits32(bcsr_io,BCSR1_RS232EN_1); + iounmap(bcsr_io); +} + +static void init_smc2_uart_ioports(struct fs_uart_platform_info* fpi) +{ + unsigned *bcsr_io; + cpm8xx_t *cp = (cpm8xx_t *)immr_map(im_cpm); + + setbits32(&cp->cp_pbpar, 0x00000c00); + clrbits32(&cp->cp_pbdir, 0x00000c00); + clrbits16(&cp->cp_pbodr, 0x0c00); + immr_unmap(cp); + + bcsr_io = ioremap(BCSR1, sizeof(unsigned long)); + + if (bcsr_io == NULL) { + printk(KERN_CRIT "Could not remap BCSR1\n"); + return; + } + clrbits32(bcsr_io,BCSR1_RS232EN_2); + iounmap(bcsr_io); +} + +void init_smc_ioports(struct fs_uart_platform_info *data) +{ + int smc_no = fs_uart_id_fsid2smc(data->fs_no); + + switch (smc_no) { + case 0: + init_smc1_uart_ioports(data); + data->brg = data->clk_rx; + break; + case 1: + init_smc2_uart_ioports(data); + data->brg = data->clk_rx; + break; + default: + printk(KERN_ERR "init_scc_ioports: invalid SCC number\n"); + return; + } +} + +int platform_device_skip(char *model, int id) +{ + return 0; +} + +static void __init mpc86xads_setup_arch(void) +{ + struct device_node *cpu; + + cpu = of_find_node_by_type(NULL, "cpu"); + if (cpu != 0) { + const unsigned int *fp; + + fp = get_property(cpu, "clock-frequency", NULL); + if (fp != 0) + loops_per_jiffy = *fp / HZ; + else + loops_per_jiffy = 50000000 / HZ; + of_node_put(cpu); + } + + cpm_reset(); + + mpc86xads_board_setup(); + + ROOT_DEV = Root_NFS; +} + +static int __init mpc86xads_probe(void) +{ + char *model = of_get_flat_dt_prop(of_get_flat_dt_root(), + "model", NULL); + if (model == NULL) + return 0; + if (strcmp(model, "MPC866ADS")) + return 0; + + return 1; +} + +define_machine(mpc86x_ads) { + .name = "MPC86x ADS", + .probe = mpc86xads_probe, + .setup_arch = mpc86xads_setup_arch, + .init_IRQ = m8xx_pic_init, + .show_cpuinfo = mpc8xx_show_cpuinfo, + .get_irq = mpc8xx_get_irq, + .restart = mpc8xx_restart, + .calibrate_decr = mpc8xx_calibrate_decr, + .set_rtc_time = mpc8xx_set_rtc_time, + .get_rtc_time = mpc8xx_get_rtc_time, +}; -- cgit v1.2.3 From 59eaef9daef35129a982c9d2b464aacb13349cdf Mon Sep 17 00:00:00 2001 From: Nathan Lynch Date: Wed, 24 Jan 2007 15:57:06 -0600 Subject: [POWERPC] Maple: don't override bus-range supplied by firmware This workaround was copy-pasted from the powermac code. It's not necessary for maple. Signed-off-by: Nathan Lynch Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/maple/pci.c | 8 -------- 1 file changed, 8 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c index 011f0f14f0f2..73c59904697f 100644 --- a/arch/powerpc/platforms/maple/pci.c +++ b/arch/powerpc/platforms/maple/pci.c @@ -425,14 +425,6 @@ static void __init setup_u4_pcie(struct pci_controller* hose) hose->cfg_addr = ioremap(0xf0000000 + 0x800000, 0x1000); hose->cfg_data = ioremap(0xf0000000 + 0xc00000, 0x1000); - /* The bus contains a bridge from root -> device, we need to - * make it visible on bus 0 so that we pick the right type - * of config cycles. If we didn't, we would have to force all - * config cycles to be type 1. So we override the "bus-range" - * property here - */ - hose->first_busno = 0x00; - hose->last_busno = 0xff; u4_pcie = hose; } -- cgit v1.2.3 From 2dc08572cc11a1ab2e67b214a4f3d7d0997473f8 Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Thu, 25 Jan 2007 19:10:52 -0500 Subject: [POWERPC] Fix apparent typo "CONFIG_SERIAL_CPM_SMC". Replace an apparent typo of CONFIG_SERIAL_CPM_SMC with CONFIG_SERIAL_CPM_SMC2. Signed-off-by: Robert P. J. Day Acked-by: Kumar Gala Signed-off-by: Paul Mackerras --- arch/ppc/platforms/mpc866ads_setup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/ppc/platforms/mpc866ads_setup.c b/arch/ppc/platforms/mpc866ads_setup.c index 8a0c07eb4449..5b05d4bd0df7 100644 --- a/arch/ppc/platforms/mpc866ads_setup.c +++ b/arch/ppc/platforms/mpc866ads_setup.c @@ -369,7 +369,7 @@ int __init mpc866ads_init(void) ppc_sys_device_setfunc(MPC8xx_CPM_SMC1, PPC_SYS_FUNC_UART); #endif -#ifdef CONFIG_SERIAL_CPM_SMC +#ifdef CONFIG_SERIAL_CPM_SMC2 ppc_sys_device_enable(MPC8xx_CPM_SMC2); ppc_sys_device_setfunc(MPC8xx_CPM_SMC2, PPC_SYS_FUNC_UART); #endif -- cgit v1.2.3 From 25c4a46f0ed8ece9ac6699e200fcc83a4642dce7 Mon Sep 17 00:00:00 2001 From: Linas Vepstas Date: Fri, 26 Jan 2007 14:55:03 -0600 Subject: [POWERPC] pSeries: EEH improperly enabled for some Power4 systems It appears that EEH is improperly enabled for some Power4 systems. On these systems, the ibm,set-eeh-option returns a value of success even when EEH is not supported on the given node. Thus, an explicit check for support is required. During boot, on power4, without this patch, one sees messages similar to: EEH: event on unsupported device, rc=0 dn=/pci@400000000110/IBM,sp@1 EEH: event on unsupported device, rc=0 dn=/pci@400000000110/pci@2 EEH: event on unsupported device, rc=0 dn=/pci@400000000110/pci@2,2 etc. The patch makes these go away. Without this patch, EEH recovery does seem to work correctly for at least some devices (I tested ethernet e1000), but fails to recover others (the Emulex LightPulse LPFC, most notably). Off the top of my head, I don't remember why some devices are affected, but not others. The PAPR indicates that the correct way to test for EEH is as done in this patch; its not clear to me if this was in the PAPR all along, or recently added; if it was there all along, its not clear to me why this hadn't been fixed long ago. I suspect only certain firmware levels are affected. Signed-off-by: Linas Vepstas Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pseries/eeh.c | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c index da6e5362e7cd..9437f48cc9e7 100644 --- a/arch/powerpc/platforms/pseries/eeh.c +++ b/arch/powerpc/platforms/pseries/eeh.c @@ -747,6 +747,7 @@ struct eeh_early_enable_info { /* Enable eeh for the given device node. */ static void *early_enable_eeh(struct device_node *dn, void *data) { + unsigned int rets[3]; struct eeh_early_enable_info *info = data; int ret; const char *status = get_property(dn, "status", NULL); @@ -803,16 +804,14 @@ static void *early_enable_eeh(struct device_node *dn, void *data) regs[0], info->buid_hi, info->buid_lo, EEH_ENABLE); + enable = 0; if (ret == 0) { - eeh_subsystem_enabled = 1; - pdn->eeh_mode |= EEH_MODE_SUPPORTED; pdn->eeh_config_addr = regs[0]; /* If the newer, better, ibm,get-config-addr-info is supported, * then use that instead. */ pdn->eeh_pe_config_addr = 0; if (ibm_get_config_addr_info != RTAS_UNKNOWN_SERVICE) { - unsigned int rets[2]; ret = rtas_call (ibm_get_config_addr_info, 4, 2, rets, pdn->eeh_config_addr, info->buid_hi, info->buid_lo, @@ -820,6 +819,20 @@ static void *early_enable_eeh(struct device_node *dn, void *data) if (ret == 0) pdn->eeh_pe_config_addr = rets[0]; } + + /* Some older systems (Power4) allow the + * ibm,set-eeh-option call to succeed even on nodes + * where EEH is not supported. Verify support + * explicitly. */ + ret = read_slot_reset_state(pdn, rets); + if ((ret == 0) && (rets[1] == 1)) + enable = 1; + } + + if (enable) { + eeh_subsystem_enabled = 1; + pdn->eeh_mode |= EEH_MODE_SUPPORTED; + #ifdef DEBUG printk(KERN_DEBUG "EEH: %s: eeh enabled, config=%x pe_config=%x\n", dn->full_name, pdn->eeh_config_addr, pdn->eeh_pe_config_addr); -- cgit v1.2.3 From eebb81c13aa831a623e903bbae97a23fe9be93eb Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Fri, 26 Jan 2007 19:07:47 -0800 Subject: [POWERPC] ps3: repository misc fixes Various fixes for the PS3 repository code: - Sync signatures of function prototypes and implementations (enum vs. unsigned int) - Correct references to `regions' as `registers': o Correct enum ps3_region_type as enum ps3_reg_type, o Correct PS3_REGION_TYPE_* as PS3_REG_TYPE_*, o Correct ps3_repository_find_region() as ps3_repository_find_reg(). - Correct function name in pr_debug() call - Minor error condition improvements. Signed-off-by: Geert Uytterhoeven Signed-off-by: Geoff Levand Acked-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/ps3/repository.c | 32 +++++++++++++++++++------------- 1 file changed, 19 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/ps3/repository.c b/arch/powerpc/platforms/ps3/repository.c index 273a0d621bdd..9ef31a5b7035 100644 --- a/arch/powerpc/platforms/ps3/repository.c +++ b/arch/powerpc/platforms/ps3/repository.c @@ -257,7 +257,7 @@ int ps3_repository_read_dev_type(unsigned int bus_index, int ps3_repository_read_dev_intr(unsigned int bus_index, unsigned int dev_index, unsigned int intr_index, - unsigned int *intr_type, unsigned int* interrupt_id) + enum ps3_interrupt_type *intr_type, unsigned int* interrupt_id) { int result; u64 v1; @@ -275,7 +275,8 @@ int ps3_repository_read_dev_intr(unsigned int bus_index, } int ps3_repository_read_dev_reg_type(unsigned int bus_index, - unsigned int dev_index, unsigned int reg_index, unsigned int *reg_type) + unsigned int dev_index, unsigned int reg_index, + enum ps3_reg_type *reg_type) { int result; u64 v1; @@ -302,8 +303,8 @@ int ps3_repository_read_dev_reg_addr(unsigned int bus_index, } int ps3_repository_read_dev_reg(unsigned int bus_index, - unsigned int dev_index, unsigned int reg_index, unsigned int *reg_type, - u64 *bus_addr, u64 *len) + unsigned int dev_index, unsigned int reg_index, + enum ps3_reg_type *reg_type, u64 *bus_addr, u64 *len) { int result = ps3_repository_read_dev_reg_type(bus_index, dev_index, reg_index, reg_type); @@ -343,7 +344,7 @@ int ps3_repository_dump_resource_info(unsigned int bus_index, } for (res_index = 0; res_index < 10; res_index++) { - enum ps3_region_type reg_type; + enum ps3_reg_type reg_type; u64 bus_addr; u64 len; @@ -487,7 +488,8 @@ static int find_device(unsigned int bus_index, unsigned int num_dev, break; } - BUG_ON(dev_index == num_dev); + if (dev_index == num_dev) + return -1; pr_debug("%s:%d: found dev_type %u at dev_index %u\n", __func__, __LINE__, dev_type, dev_index); @@ -521,7 +523,7 @@ int ps3_repository_find_device (enum ps3_bus_type bus_type, pr_debug("%s:%d: find bus_type %u, dev_type %u\n", __func__, __LINE__, bus_type, dev_type); - dev->bus_index = UINT_MAX; + BUG_ON(start_dev && start_dev->bus_index > 10); for (bus_index = start_dev ? start_dev->bus_index : 0; bus_index < 10; bus_index++) { @@ -532,13 +534,15 @@ int ps3_repository_find_device (enum ps3_bus_type bus_type, if (result) { pr_debug("%s:%d read_bus_type failed\n", __func__, __LINE__); + dev->bus_index = UINT_MAX; return result; } if (x == bus_type) break; } - BUG_ON(bus_index == 10); + if (bus_index >= 10) + return -ENODEV; pr_debug("%s:%d: found bus_type %u at bus_index %u\n", __func__, __LINE__, bus_type, bus_index); @@ -604,7 +608,8 @@ int ps3_repository_find_interrupt(const struct ps3_repository_device *dev, } } - BUG_ON(res_index == 10); + if (res_index == 10) + return -ENODEV; pr_debug("%s:%d: found intr_type %u at res_index %u\n", __func__, __LINE__, intr_type, res_index); @@ -612,8 +617,8 @@ int ps3_repository_find_interrupt(const struct ps3_repository_device *dev, return result; } -int ps3_repository_find_region(const struct ps3_repository_device *dev, - enum ps3_region_type reg_type, u64 *bus_addr, u64 *len) +int ps3_repository_find_reg(const struct ps3_repository_device *dev, + enum ps3_reg_type reg_type, u64 *bus_addr, u64 *len) { int result = 0; unsigned int res_index; @@ -623,7 +628,7 @@ int ps3_repository_find_region(const struct ps3_repository_device *dev, *bus_addr = *len = 0; for (res_index = 0; res_index < 10; res_index++) { - enum ps3_region_type t; + enum ps3_reg_type t; u64 a; u64 l; @@ -643,7 +648,8 @@ int ps3_repository_find_region(const struct ps3_repository_device *dev, } } - BUG_ON(res_index == 10); + if (res_index == 10) + return -ENODEV; pr_debug("%s:%d: found reg_type %u at res_index %u\n", __func__, __LINE__, reg_type, res_index); -- cgit v1.2.3 From 6c7be7d385f4911895877e0f0697c598f600136f Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 26 Jan 2007 19:07:51 -0800 Subject: [POWERPC] ps3: repository storage support Handle storage-related repository data: - Add missing implementations of ps3_repository_read_stor_*() repository accessors. - Dump storage properties in debug mode - Add PS3_DEV_TYPE_STOR_{DISK,ROM,FLASH} device types (which are identical to the corresponding SCSI device types) to enum ps3_dev_type Signed-off-by: Geert Uytterhoeven Signed-off-by: Geoff Levand Acked-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/ps3/repository.c | 185 +++++++++++++++++++++++++++++++- 1 file changed, 183 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/ps3/repository.c b/arch/powerpc/platforms/ps3/repository.c index 9ef31a5b7035..2416bfadec9e 100644 --- a/arch/powerpc/platforms/ps3/repository.c +++ b/arch/powerpc/platforms/ps3/repository.c @@ -368,7 +368,55 @@ int ps3_repository_dump_resource_info(unsigned int bus_index, return result; } -static int dump_device_info(unsigned int bus_index, unsigned int num_dev) +static int dump_stor_dev_info(unsigned int bus_index, unsigned int dev_index) +{ + int result = 0; + unsigned int num_regions, region_index; + u64 port, blk_size, num_blocks; + + pr_debug(" -> %s:%d: (%u:%u)\n", __func__, __LINE__, + bus_index, dev_index); + + result = ps3_repository_read_stor_dev_info(bus_index, dev_index, &port, + &blk_size, &num_blocks, &num_regions); + if (result) { + pr_debug("%s:%d ps3_repository_read_stor_dev_info" + " (%u:%u) failed\n", __func__, __LINE__, + bus_index, dev_index); + goto out; + } + + pr_debug("%s:%d (%u:%u): port %lu, blk_size %lu, num_blocks " + "%lu, num_regions %u\n", + __func__, __LINE__, bus_index, dev_index, port, + blk_size, num_blocks, num_regions); + + for (region_index = 0; region_index < num_regions; region_index++) { + unsigned int region_id; + u64 region_start, region_size; + + result = ps3_repository_read_stor_dev_region(bus_index, + dev_index, region_index, ®ion_id, ®ion_start, + ®ion_size); + if (result) { + pr_debug("%s:%d ps3_repository_read_stor_dev_region" + " (%u:%u) failed\n", __func__, __LINE__, + bus_index, dev_index); + break; + } + + pr_debug("%s:%d (%u:%u) region_id %u, start %lxh, size %lxh\n", + __func__, __LINE__, bus_index, dev_index, region_id, + region_start, region_size); + } + +out: + pr_debug(" <- %s:%d\n", __func__, __LINE__); + return result; +} + +static int dump_device_info(unsigned int bus_index, enum ps3_bus_type bus_type, + unsigned int num_dev) { int result = 0; unsigned int dev_index; @@ -403,6 +451,9 @@ static int dump_device_info(unsigned int bus_index, unsigned int num_dev) __LINE__, bus_index, dev_index, dev_type, dev_id); ps3_repository_dump_resource_info(bus_index, dev_index); + + if (bus_type == PS3_BUS_TYPE_STORAGE) + dump_stor_dev_info(bus_index, dev_index); } pr_debug(" <- %s:%d\n", __func__, __LINE__); @@ -453,7 +504,7 @@ int ps3_repository_dump_bus_info(void) __func__, __LINE__, bus_index, bus_type, bus_id, num_dev); - dump_device_info(bus_index, num_dev); + dump_device_info(bus_index, bus_type, num_dev); } pr_debug(" <- %s:%d\n", __func__, __LINE__); @@ -657,6 +708,136 @@ int ps3_repository_find_reg(const struct ps3_repository_device *dev, return result; } +int ps3_repository_read_stor_dev_port(unsigned int bus_index, + unsigned int dev_index, u64 *port) +{ + return read_node(PS3_LPAR_ID_PME, + make_first_field("bus", bus_index), + make_field("dev", dev_index), + make_field("port", 0), + 0, port, 0); +} + +int ps3_repository_read_stor_dev_blk_size(unsigned int bus_index, + unsigned int dev_index, u64 *blk_size) +{ + return read_node(PS3_LPAR_ID_PME, + make_first_field("bus", bus_index), + make_field("dev", dev_index), + make_field("blk_size", 0), + 0, blk_size, 0); +} + +int ps3_repository_read_stor_dev_num_blocks(unsigned int bus_index, + unsigned int dev_index, u64 *num_blocks) +{ + return read_node(PS3_LPAR_ID_PME, + make_first_field("bus", bus_index), + make_field("dev", dev_index), + make_field("n_blocks", 0), + 0, num_blocks, 0); +} + +int ps3_repository_read_stor_dev_num_regions(unsigned int bus_index, + unsigned int dev_index, unsigned int *num_regions) +{ + int result; + u64 v1; + + result = read_node(PS3_LPAR_ID_PME, + make_first_field("bus", bus_index), + make_field("dev", dev_index), + make_field("n_regs", 0), + 0, &v1, 0); + *num_regions = v1; + return result; +} + +int ps3_repository_read_stor_dev_region_id(unsigned int bus_index, + unsigned int dev_index, unsigned int region_index, + unsigned int *region_id) +{ + int result; + u64 v1; + + result = read_node(PS3_LPAR_ID_PME, + make_first_field("bus", bus_index), + make_field("dev", dev_index), + make_field("region", region_index), + make_field("id", 0), + &v1, 0); + *region_id = v1; + return result; +} + +int ps3_repository_read_stor_dev_region_size(unsigned int bus_index, + unsigned int dev_index, unsigned int region_index, u64 *region_size) +{ + return read_node(PS3_LPAR_ID_PME, + make_first_field("bus", bus_index), + make_field("dev", dev_index), + make_field("region", region_index), + make_field("size", 0), + region_size, 0); +} + +int ps3_repository_read_stor_dev_region_start(unsigned int bus_index, + unsigned int dev_index, unsigned int region_index, u64 *region_start) +{ + return read_node(PS3_LPAR_ID_PME, + make_first_field("bus", bus_index), + make_field("dev", dev_index), + make_field("region", region_index), + make_field("start", 0), + region_start, 0); +} + +int ps3_repository_read_stor_dev_info(unsigned int bus_index, + unsigned int dev_index, u64 *port, u64 *blk_size, + u64 *num_blocks, unsigned int *num_regions) +{ + int result; + + result = ps3_repository_read_stor_dev_port(bus_index, dev_index, port); + if (result) + return result; + + result = ps3_repository_read_stor_dev_blk_size(bus_index, dev_index, + blk_size); + if (result) + return result; + + result = ps3_repository_read_stor_dev_num_blocks(bus_index, dev_index, + num_blocks); + if (result) + return result; + + result = ps3_repository_read_stor_dev_num_regions(bus_index, dev_index, + num_regions); + return result; +} + +int ps3_repository_read_stor_dev_region(unsigned int bus_index, + unsigned int dev_index, unsigned int region_index, + unsigned int *region_id, u64 *region_start, u64 *region_size) +{ + int result; + + result = ps3_repository_read_stor_dev_region_id(bus_index, dev_index, + region_index, region_id); + if (result) + return result; + + result = ps3_repository_read_stor_dev_region_start(bus_index, dev_index, + region_index, region_start); + if (result) + return result; + + result = ps3_repository_read_stor_dev_region_size(bus_index, dev_index, + region_index, region_size); + return result; +} + int ps3_repository_read_rm_size(unsigned int ppe_id, u64 *rm_size) { return read_node(PS3_LPAR_ID_CURRENT, -- cgit v1.2.3 From a8229a9e5211a52839268b82ae14cdf528d48f58 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Fri, 26 Jan 2007 19:07:56 -0800 Subject: [POWERPC] ps3: fix struct alignment attributes Remove incorrect alignment attributes in PS3 platform code for struct spe_shadow, struct os_area_header, and struct os_area_params. Signed-off-by: Geoff Levand Acked-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/ps3/os-area.c | 4 ++-- arch/powerpc/platforms/ps3/spu.c | 5 ++--- 2 files changed, 4 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/ps3/os-area.c b/arch/powerpc/platforms/ps3/os-area.c index 58358305dc10..b4ac924ada43 100644 --- a/arch/powerpc/platforms/ps3/os-area.c +++ b/arch/powerpc/platforms/ps3/os-area.c @@ -59,7 +59,7 @@ struct os_area_header { u32 ldr_format; u32 ldr_size; u32 _reserved_2[6]; -} __attribute__ ((packed)); +}; enum { PARAM_BOOT_FLAG_GAME_OS = 0, @@ -114,7 +114,7 @@ struct os_area_params { u8 dns_primary[4]; u8 dns_secondary[4]; u8 _reserved_5[8]; -} __attribute__ ((packed)); +}; /** * struct saved_params - Static working copies of data from the 'Other OS' area. diff --git a/arch/powerpc/platforms/ps3/spu.c b/arch/powerpc/platforms/ps3/spu.c index 644532c3b7c4..ed88dc6a7f2f 100644 --- a/arch/powerpc/platforms/ps3/spu.c +++ b/arch/powerpc/platforms/ps3/spu.c @@ -50,7 +50,7 @@ enum spe_type { */ struct spe_shadow { - u8 padding_0000[0x0140]; + u8 padding_0140[0x0140]; u64 int_status_class0_RW; /* 0x0140 */ u64 int_status_class1_RW; /* 0x0148 */ u64 int_status_class2_RW; /* 0x0150 */ @@ -67,8 +67,7 @@ struct spe_shadow { u8 padding_0c08[0x0f00-0x0c08]; u64 spe_execution_status; /* 0x0f00 */ u8 padding_0f08[0x1000-0x0f08]; -} __attribute__ ((packed)); - +}; /** * enum spe_ex_state - Logical spe execution state. -- cgit v1.2.3 From 9633ac8d172f74b8ee51e0fe85c06eb726039aa8 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Fri, 26 Jan 2007 19:07:59 -0800 Subject: [POWERPC] ps3: rename interrupt symbols Rename some PS3 interrupt symbols to avoid name clashes and aid debugging. No change to code. Signed-off-by: Geoff Levand Acked-by: Benjamin Herrenschmidt Acked-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/ps3/interrupt.c | 66 +++++++++++++++++----------------- 1 file changed, 33 insertions(+), 33 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/ps3/interrupt.c b/arch/powerpc/platforms/ps3/interrupt.c index 6f5de438b980..9c8f3b568a21 100644 --- a/arch/powerpc/platforms/ps3/interrupt.c +++ b/arch/powerpc/platforms/ps3/interrupt.c @@ -288,7 +288,7 @@ int ps3_free_spe_irq(unsigned int virq) #define PS3_PLUG_MAX 63 /** - * struct bmp - a per cpu irq status and mask bitmap structure + * struct ps3_bmp - a per cpu irq status and mask bitmap structure * @status: 256 bit status bitmap indexed by plug * @unused_1: * @mask: 256 bit mask bitmap indexed by plug @@ -311,7 +311,7 @@ int ps3_free_spe_irq(unsigned int virq) * can aquire. */ -struct bmp { +struct ps3_bmp { struct { unsigned long status; unsigned long unused_1[3]; @@ -323,16 +323,16 @@ struct bmp { }; /** - * struct private - a per cpu data structure + * struct ps3_private - a per cpu data structure * @node: HV node id * @cpu: HV thread id - * @bmp: an HV bmp structure + * @bmp: an HV ps3_bmp structure */ -struct private { +struct ps3_private { unsigned long node; unsigned int cpu; - struct bmp bmp; + struct ps3_bmp bmp; }; #if defined(DEBUG) @@ -353,7 +353,7 @@ static void __attribute__ ((unused)) _dump_256_bmp(const char *header, } #define dump_bmp(_x) _dump_bmp(_x, __func__, __LINE__) -static void _dump_bmp(struct private* pd, const char* func, int line) +static void _dump_bmp(struct ps3_private* pd, const char* func, int line) { unsigned long flags; @@ -364,7 +364,7 @@ static void _dump_bmp(struct private* pd, const char* func, int line) } #define dump_mask(_x) _dump_mask(_x, __func__, __LINE__) -static void __attribute__ ((unused)) _dump_mask(struct private* pd, +static void __attribute__ ((unused)) _dump_mask(struct ps3_private* pd, const char* func, int line) { unsigned long flags; @@ -374,13 +374,13 @@ static void __attribute__ ((unused)) _dump_mask(struct private* pd, spin_unlock_irqrestore(&pd->bmp.lock, flags); } #else -static void dump_bmp(struct private* pd) {}; +static void dump_bmp(struct ps3_private* pd) {}; #endif /* defined(DEBUG) */ -static void chip_mask(unsigned int virq) +static void ps3_chip_mask(unsigned int virq) { unsigned long flags; - struct private *pd = get_irq_chip_data(virq); + struct ps3_private *pd = get_irq_chip_data(virq); pr_debug("%s:%d: cpu %u, virq %d\n", __func__, __LINE__, pd->cpu, virq); @@ -394,10 +394,10 @@ static void chip_mask(unsigned int virq) lv1_did_update_interrupt_mask(pd->node, pd->cpu); } -static void chip_unmask(unsigned int virq) +static void ps3_chip_unmask(unsigned int virq) { unsigned long flags; - struct private *pd = get_irq_chip_data(virq); + struct ps3_private *pd = get_irq_chip_data(virq); pr_debug("%s:%d: cpu %u, virq %d\n", __func__, __LINE__, pd->cpu, virq); @@ -411,19 +411,19 @@ static void chip_unmask(unsigned int virq) lv1_did_update_interrupt_mask(pd->node, pd->cpu); } -static void chip_eoi(unsigned int virq) +static void ps3_chip_eoi(unsigned int virq) { lv1_end_of_interrupt(virq); } static struct irq_chip irq_chip = { .typename = "ps3", - .mask = chip_mask, - .unmask = chip_unmask, - .eoi = chip_eoi, + .mask = ps3_chip_mask, + .unmask = ps3_chip_unmask, + .eoi = ps3_chip_eoi, }; -static void host_unmap(struct irq_host *h, unsigned int virq) +static void ps3_host_unmap(struct irq_host *h, unsigned int virq) { int result; @@ -435,9 +435,9 @@ static void host_unmap(struct irq_host *h, unsigned int virq) BUG_ON(result); } -static DEFINE_PER_CPU(struct private, private); +static DEFINE_PER_CPU(struct ps3_private, ps3_private); -static int host_map(struct irq_host *h, unsigned int virq, +static int ps3_host_map(struct irq_host *h, unsigned int virq, irq_hw_number_t hwirq) { int result; @@ -460,7 +460,7 @@ static int host_map(struct irq_host *h, unsigned int virq, return -EPERM; } - result = set_irq_chip_data(virq, &per_cpu(private, cpu)); + result = set_irq_chip_data(virq, &per_cpu(ps3_private, cpu)); BUG_ON(result); set_irq_chip_and_handler(virq, &irq_chip, handle_fasteoi_irq); @@ -469,14 +469,14 @@ static int host_map(struct irq_host *h, unsigned int virq, return result; } -static struct irq_host_ops host_ops = { - .map = host_map, - .unmap = host_unmap, +static struct irq_host_ops ps3_host_ops = { + .map = ps3_host_map, + .unmap = ps3_host_unmap, }; void __init ps3_register_ipi_debug_brk(unsigned int cpu, unsigned int virq) { - struct private *pd = &per_cpu(private, cpu); + struct ps3_private *pd = &per_cpu(ps3_private, cpu); pd->bmp.ipi_debug_brk_mask = 0x8000000000000000UL >> virq; @@ -484,7 +484,7 @@ void __init ps3_register_ipi_debug_brk(unsigned int cpu, unsigned int virq) cpu, virq, pd->bmp.ipi_debug_brk_mask); } -static int bmp_get_and_clear_status_bit(struct bmp *m) +static int bmp_get_and_clear_status_bit(struct ps3_bmp *m) { unsigned long flags; unsigned int bit; @@ -519,22 +519,22 @@ unsigned int ps3_get_irq(void) { int plug; - struct private *pd = &__get_cpu_var(private); + struct ps3_private *pd = &__get_cpu_var(ps3_private); plug = bmp_get_and_clear_status_bit(&pd->bmp); if (plug < 1) { pr_debug("%s:%d: no plug found: cpu %u\n", __func__, __LINE__, pd->cpu); - dump_bmp(&per_cpu(private, 0)); - dump_bmp(&per_cpu(private, 1)); + dump_bmp(&per_cpu(ps3_private, 0)); + dump_bmp(&per_cpu(ps3_private, 1)); return NO_IRQ; } #if defined(DEBUG) if (plug < NUM_ISA_INTERRUPTS || plug > PS3_PLUG_MAX) { - dump_bmp(&per_cpu(private, 0)); - dump_bmp(&per_cpu(private, 1)); + dump_bmp(&per_cpu(ps3_private, 0)); + dump_bmp(&per_cpu(ps3_private, 1)); BUG(); } #endif @@ -550,13 +550,13 @@ void __init ps3_init_IRQ(void) lv1_get_logical_ppe_id(&node); - host = irq_alloc_host(IRQ_HOST_MAP_NOMAP, 0, &host_ops, + host = irq_alloc_host(IRQ_HOST_MAP_NOMAP, 0, &ps3_host_ops, PS3_INVALID_OUTLET); irq_set_default_host(host); irq_set_virq_count(PS3_PLUG_MAX + 1); for_each_possible_cpu(cpu) { - struct private *pd = &per_cpu(private, cpu); + struct ps3_private *pd = &per_cpu(ps3_private, cpu); pd->node = node; pd->cpu = cpu; -- cgit v1.2.3 From 407e24a0c78f585c228ec7e1152a9b23e262b200 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Fri, 26 Jan 2007 19:08:02 -0800 Subject: [POWERPC] ps3: smp interrupt fixes PS3 fixups for interrups on SMP. Fixes the alignment of the interrupt status bitmap, changes the hypervisor interrupt calls to the '_ext' versions that take an explicit processor thread ID. Signed-off-by: Geoff Levand Acked-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/ps3/interrupt.c | 60 ++++++++++++++++------------------ 1 file changed, 29 insertions(+), 31 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/ps3/interrupt.c b/arch/powerpc/platforms/ps3/interrupt.c index 9c8f3b568a21..7a4ca056dd3a 100644 --- a/arch/powerpc/platforms/ps3/interrupt.c +++ b/arch/powerpc/platforms/ps3/interrupt.c @@ -317,22 +317,23 @@ struct ps3_bmp { unsigned long unused_1[3]; unsigned long mask; unsigned long unused_2[3]; - } __attribute__ ((packed)); + } __attribute__ ((aligned (64))); + spinlock_t lock; unsigned long ipi_debug_brk_mask; }; /** * struct ps3_private - a per cpu data structure - * @node: HV node id - * @cpu: HV thread id - * @bmp: an HV ps3_bmp structure + * @bmp: ps3_bmp structure + * @node: HV logical_ppe_id + * @cpu: HV thread_id */ struct ps3_private { + struct ps3_bmp bmp; unsigned long node; unsigned int cpu; - struct ps3_bmp bmp; }; #if defined(DEBUG) @@ -389,9 +390,8 @@ static void ps3_chip_mask(unsigned int virq) spin_lock_irqsave(&pd->bmp.lock, flags); pd->bmp.mask &= ~(0x8000000000000000UL >> virq); - spin_unlock_irqrestore(&pd->bmp.lock, flags); - lv1_did_update_interrupt_mask(pd->node, pd->cpu); + spin_unlock_irqrestore(&pd->bmp.lock, flags); } static void ps3_chip_unmask(unsigned int virq) @@ -406,14 +406,14 @@ static void ps3_chip_unmask(unsigned int virq) spin_lock_irqsave(&pd->bmp.lock, flags); pd->bmp.mask |= (0x8000000000000000UL >> virq); - spin_unlock_irqrestore(&pd->bmp.lock, flags); - lv1_did_update_interrupt_mask(pd->node, pd->cpu); + spin_unlock_irqrestore(&pd->bmp.lock, flags); } static void ps3_chip_eoi(unsigned int virq) { - lv1_end_of_interrupt(virq); + const struct ps3_private *pd = get_irq_chip_data(virq); + lv1_end_of_interrupt_ext(pd->node, pd->cpu, virq); } static struct irq_chip irq_chip = { @@ -426,10 +426,12 @@ static struct irq_chip irq_chip = { static void ps3_host_unmap(struct irq_host *h, unsigned int virq) { int result; + const struct ps3_private *pd = get_irq_chip_data(virq); - pr_debug("%s:%d: virq %d\n", __func__, __LINE__, virq); + pr_debug("%s:%d: node %lu, cpu %d, virq %u\n", __func__, __LINE__, + pd->node, pd->cpu, virq); - lv1_disconnect_irq_plug(virq); + lv1_disconnect_irq_plug_ext(pd->node, pd->cpu, virq); result = set_irq_chip_data(virq, NULL); BUG_ON(result); @@ -441,31 +443,26 @@ static int ps3_host_map(struct irq_host *h, unsigned int virq, irq_hw_number_t hwirq) { int result; - unsigned int cpu; + struct ps3_private *pd = &__get_cpu_var(ps3_private); - pr_debug(" -> %s:%d\n", __func__, __LINE__); - pr_debug("%s:%d: hwirq %lu => virq %u\n", __func__, __LINE__, hwirq, - virq); + pr_debug("%s:%d: node %lu, cpu %d, hwirq %lu => virq %u\n", __func__, + __LINE__, pd->node, pd->cpu, hwirq, virq); - /* bind this virq to a cpu */ + /* Binds this virq to pd->cpu (current cpu) */ - preempt_disable(); - cpu = smp_processor_id(); - result = lv1_connect_irq_plug(virq, hwirq); - preempt_enable(); + result = lv1_connect_irq_plug_ext(pd->node, pd->cpu, virq, hwirq, 0); if (result) { - pr_info("%s:%d: lv1_connect_irq_plug failed:" + pr_info("%s:%d: lv1_connect_irq_plug_ext failed:" " %s\n", __func__, __LINE__, ps3_result(result)); return -EPERM; } - result = set_irq_chip_data(virq, &per_cpu(ps3_private, cpu)); + result = set_irq_chip_data(virq, pd); BUG_ON(result); set_irq_chip_and_handler(virq, &irq_chip, handle_fasteoi_irq); - pr_debug(" <- %s:%d\n", __func__, __LINE__); return result; } @@ -544,12 +541,9 @@ unsigned int ps3_get_irq(void) void __init ps3_init_IRQ(void) { int result; - unsigned long node; unsigned cpu; struct irq_host *host; - lv1_get_logical_ppe_id(&node); - host = irq_alloc_host(IRQ_HOST_MAP_NOMAP, 0, &ps3_host_ops, PS3_INVALID_OUTLET); irq_set_default_host(host); @@ -558,12 +552,16 @@ void __init ps3_init_IRQ(void) for_each_possible_cpu(cpu) { struct ps3_private *pd = &per_cpu(ps3_private, cpu); - pd->node = node; - pd->cpu = cpu; + lv1_get_logical_ppe_id(&pd->node); + pd->cpu = get_hard_smp_processor_id(cpu); spin_lock_init(&pd->bmp.lock); - result = lv1_configure_irq_state_bitmap(node, cpu, - ps3_mm_phys_to_lpar(__pa(&pd->bmp.status))); + pr_debug("%s:%d: node %lu, cpu %d, bmp %lxh\n", __func__, + __LINE__, pd->node, pd->cpu, + ps3_mm_phys_to_lpar(__pa(&pd->bmp))); + + result = lv1_configure_irq_state_bitmap(pd->node, pd->cpu, + ps3_mm_phys_to_lpar(__pa(&pd->bmp))); if (result) pr_debug("%s:%d: lv1_configure_irq_state_bitmap failed:" -- cgit v1.2.3 From 9cf9e19667f6ce01bd509a154157270069f836f9 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 26 Jan 2007 19:08:05 -0800 Subject: [POWERPC] ps3: cleanup interrupt bmp routines Change the PS3 interrupt bitmask routines to be lockless. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Geoff Levand Acked-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/ps3/interrupt.c | 85 +++++++++++++++------------------- 1 file changed, 38 insertions(+), 47 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/ps3/interrupt.c b/arch/powerpc/platforms/ps3/interrupt.c index 7a4ca056dd3a..d3c97fbff7ef 100644 --- a/arch/powerpc/platforms/ps3/interrupt.c +++ b/arch/powerpc/platforms/ps3/interrupt.c @@ -380,34 +380,50 @@ static void dump_bmp(struct ps3_private* pd) {}; static void ps3_chip_mask(unsigned int virq) { - unsigned long flags; struct ps3_private *pd = get_irq_chip_data(virq); + unsigned long bit = 0x8000000000000000UL >> virq; + unsigned long *p = &pd->bmp.mask; + unsigned long old; + unsigned long flags; pr_debug("%s:%d: cpu %u, virq %d\n", __func__, __LINE__, pd->cpu, virq); - BUG_ON(virq < NUM_ISA_INTERRUPTS); - BUG_ON(virq > PS3_PLUG_MAX); + local_irq_save(flags); + asm volatile( + "1: ldarx %0,0,%3\n" + "andc %0,%0,%2\n" + "stdcx. %0,0,%3\n" + "bne- 1b" + : "=&r" (old), "+m" (*p) + : "r" (bit), "r" (p) + : "cc" ); - spin_lock_irqsave(&pd->bmp.lock, flags); - pd->bmp.mask &= ~(0x8000000000000000UL >> virq); lv1_did_update_interrupt_mask(pd->node, pd->cpu); - spin_unlock_irqrestore(&pd->bmp.lock, flags); + local_irq_restore(flags); } static void ps3_chip_unmask(unsigned int virq) { - unsigned long flags; struct ps3_private *pd = get_irq_chip_data(virq); + unsigned long bit = 0x8000000000000000UL >> virq; + unsigned long *p = &pd->bmp.mask; + unsigned long old; + unsigned long flags; pr_debug("%s:%d: cpu %u, virq %d\n", __func__, __LINE__, pd->cpu, virq); - BUG_ON(virq < NUM_ISA_INTERRUPTS); - BUG_ON(virq > PS3_PLUG_MAX); + local_irq_save(flags); + asm volatile( + "1: ldarx %0,0,%3\n" + "or %0,%0,%2\n" + "stdcx. %0,0,%3\n" + "bne- 1b" + : "=&r" (old), "+m" (*p) + : "r" (bit), "r" (p) + : "cc" ); - spin_lock_irqsave(&pd->bmp.lock, flags); - pd->bmp.mask |= (0x8000000000000000UL >> virq); lv1_did_update_interrupt_mask(pd->node, pd->cpu); - spin_unlock_irqrestore(&pd->bmp.lock, flags); + local_irq_restore(flags); } static void ps3_chip_eoi(unsigned int virq) @@ -481,46 +497,21 @@ void __init ps3_register_ipi_debug_brk(unsigned int cpu, unsigned int virq) cpu, virq, pd->bmp.ipi_debug_brk_mask); } -static int bmp_get_and_clear_status_bit(struct ps3_bmp *m) +unsigned int ps3_get_irq(void) { - unsigned long flags; - unsigned int bit; - unsigned long x; - - spin_lock_irqsave(&m->lock, flags); + struct ps3_private *pd = &__get_cpu_var(ps3_private); + unsigned long x = (pd->bmp.status & pd->bmp.mask); + unsigned int plug; /* check for ipi break first to stop this cpu ASAP */ - if (m->status & m->ipi_debug_brk_mask) { - m->status &= ~m->ipi_debug_brk_mask; - spin_unlock_irqrestore(&m->lock, flags); - return __ilog2(m->ipi_debug_brk_mask); - } - - x = (m->status & m->mask); - - for (bit = NUM_ISA_INTERRUPTS, x <<= bit; x; bit++, x <<= 1) - if (x & 0x8000000000000000UL) { - m->status &= ~(0x8000000000000000UL >> bit); - spin_unlock_irqrestore(&m->lock, flags); - return bit; - } - - spin_unlock_irqrestore(&m->lock, flags); - - pr_debug("%s:%d: not found\n", __func__, __LINE__); - return -1; -} - -unsigned int ps3_get_irq(void) -{ - int plug; - - struct ps3_private *pd = &__get_cpu_var(ps3_private); + if (x & pd->bmp.ipi_debug_brk_mask) + x &= pd->bmp.ipi_debug_brk_mask; - plug = bmp_get_and_clear_status_bit(&pd->bmp); + asm volatile("cntlzd %0,%1" : "=r" (plug) : "r" (x)); + plug &= 0x3f; - if (plug < 1) { + if (unlikely(plug) == NO_IRQ) { pr_debug("%s:%d: no plug found: cpu %u\n", __func__, __LINE__, pd->cpu); dump_bmp(&per_cpu(ps3_private, 0)); @@ -529,7 +520,7 @@ unsigned int ps3_get_irq(void) } #if defined(DEBUG) - if (plug < NUM_ISA_INTERRUPTS || plug > PS3_PLUG_MAX) { + if (unlikely(plug < NUM_ISA_INTERRUPTS || plug > PS3_PLUG_MAX)) { dump_bmp(&per_cpu(ps3_private, 0)); dump_bmp(&per_cpu(ps3_private, 1)); BUG(); -- cgit v1.2.3 From 861be32ce7f1cf272a3f809e77213b83117a0bd2 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Fri, 26 Jan 2007 19:08:08 -0800 Subject: [POWERPC] ps3: bind interrupt to cpu Change the PS3 irq allocation routines to take an argument indicating which cpu (processor thread) the interrupt should be serviced on. The current system configuration favors device interrupts that are serviced on cpu0, so that is used as the default. Signed-off-by: Geoff Levand Acked-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/ps3/interrupt.c | 299 +++++++++++++++++++-------------- arch/powerpc/platforms/ps3/smp.c | 2 +- arch/powerpc/platforms/ps3/spu.c | 12 +- 3 files changed, 182 insertions(+), 131 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/ps3/interrupt.c b/arch/powerpc/platforms/ps3/interrupt.c index d3c97fbff7ef..27afd1f0358a 100644 --- a/arch/powerpc/platforms/ps3/interrupt.c +++ b/arch/powerpc/platforms/ps3/interrupt.c @@ -35,16 +35,141 @@ #define DBG(fmt...) do{if(0)printk(fmt);}while(0) #endif +/** + * struct ps3_bmp - a per cpu irq status and mask bitmap structure + * @status: 256 bit status bitmap indexed by plug + * @unused_1: + * @mask: 256 bit mask bitmap indexed by plug + * @unused_2: + * @lock: + * @ipi_debug_brk_mask: + * + * The HV mantains per SMT thread mappings of HV outlet to HV plug on + * behalf of the guest. These mappings are implemented as 256 bit guest + * supplied bitmaps indexed by plug number. The addresses of the bitmaps + * are registered with the HV through lv1_configure_irq_state_bitmap(). + * + * The HV supports 256 plugs per thread, assigned as {0..255}, for a total + * of 512 plugs supported on a processor. To simplify the logic this + * implementation equates HV plug value to Linux virq value, constrains each + * interrupt to have a system wide unique plug number, and limits the range + * of the plug values to map into the first dword of the bitmaps. This + * gives a usable range of plug values of {NUM_ISA_INTERRUPTS..63}. Note + * that there is no constraint on how many in this set an individual thread + * can acquire. + */ + +struct ps3_bmp { + struct { + u64 status; + u64 unused_1[3]; + u64 mask; + u64 unused_2[3]; + }; + u64 ipi_debug_brk_mask; + spinlock_t lock; +}; + +/** + * struct ps3_private - a per cpu data structure + * @bmp: ps3_bmp structure + * @node: HV logical_ppe_id + * @cpu: HV thread_id + */ + +struct ps3_private { + struct ps3_bmp bmp __attribute__ ((aligned (64))); + u64 node; + unsigned int cpu; +}; + +static DEFINE_PER_CPU(struct ps3_private, ps3_private); + +static int ps3_connect_irq(enum ps3_cpu_binding cpu, unsigned long outlet, + unsigned int *virq) +{ + int result; + struct ps3_private *pd; + + /* This defines the default interrupt distribution policy. */ + + if (cpu == PS3_BINDING_CPU_ANY) + cpu = 0; + + pd = &per_cpu(ps3_private, cpu); + + *virq = irq_create_mapping(NULL, outlet); + + if (*virq == NO_IRQ) { + pr_debug("%s:%d: irq_create_mapping failed: outlet %lu\n", + __func__, __LINE__, outlet); + result = -ENOMEM; + goto fail_create; + } + + /* Binds outlet to cpu + virq. */ + + result = lv1_connect_irq_plug_ext(pd->node, pd->cpu, *virq, outlet, 0); + + if (result) { + pr_info("%s:%d: lv1_connect_irq_plug_ext failed: %s\n", + __func__, __LINE__, ps3_result(result)); + result = -EPERM; + goto fail_connect; + } + + pr_debug("%s:%d: outlet %lu => cpu %u, virq %u\n", __func__, __LINE__, + outlet, cpu, *virq); + + result = set_irq_chip_data(*virq, pd); + + if (result) { + pr_debug("%s:%d: set_irq_chip_data failed\n", + __func__, __LINE__); + goto fail_set; + } + + return result; + +fail_set: + lv1_disconnect_irq_plug_ext(pd->node, pd->cpu, *virq); +fail_connect: + irq_dispose_mapping(*virq); +fail_create: + return result; +} + +static void ps3_disconnect_irq(unsigned int virq) +{ + int result; + const struct ps3_private *pd = get_irq_chip_data(virq); + + pr_debug("%s:%d: node %lu, cpu %d, virq %u\n", __func__, __LINE__, + pd->node, pd->cpu, virq); + + result = lv1_disconnect_irq_plug_ext(pd->node, pd->cpu, virq); + + if (result) + pr_info("%s:%d: lv1_disconnect_irq_plug_ext failed: %s\n", + __func__, __LINE__, ps3_result(result)); + + set_irq_chip_data(virq, NULL); + irq_dispose_mapping(virq); +} + /** * ps3_alloc_io_irq - Assign a virq to a system bus device. - * interrupt_id: The device interrupt id read from the system repository. + * @cpu: enum ps3_cpu_binding indicating the cpu the interrupt should be + * serviced on. + * @interrupt_id: The device interrupt id read from the system repository. * @virq: The assigned Linux virq. * * An io irq represents a non-virtualized device interrupt. interrupt_id * coresponds to the interrupt number of the interrupt controller. */ -int ps3_alloc_io_irq(unsigned int interrupt_id, unsigned int *virq) +int ps3_alloc_io_irq(enum ps3_cpu_binding cpu, unsigned int interrupt_id, + unsigned int *virq) { int result; unsigned long outlet; @@ -57,12 +182,10 @@ int ps3_alloc_io_irq(unsigned int interrupt_id, unsigned int *virq) return result; } - *virq = irq_create_mapping(NULL, outlet); - - pr_debug("%s:%d: interrupt_id %u => outlet %lu, virq %u\n", - __func__, __LINE__, interrupt_id, outlet, *virq); + result = ps3_connect_irq(cpu, outlet, virq); + BUG_ON(result); - return 0; + return result; } int ps3_free_io_irq(unsigned int virq) @@ -75,13 +198,15 @@ int ps3_free_io_irq(unsigned int virq) pr_debug("%s:%d: lv1_destruct_io_irq_outlet failed: %s\n", __func__, __LINE__, ps3_result(result)); - irq_dispose_mapping(virq); + ps3_disconnect_irq(virq); return result; } /** * ps3_alloc_event_irq - Allocate a virq for use with a system event. + * @cpu: enum ps3_cpu_binding indicating the cpu the interrupt should be + * serviced on. * @virq: The assigned Linux virq. * * The virq can be used with lv1_connect_interrupt_event_receive_port() to @@ -89,7 +214,7 @@ int ps3_free_io_irq(unsigned int virq) * events. */ -int ps3_alloc_event_irq(unsigned int *virq) +int ps3_alloc_event_irq(enum ps3_cpu_binding cpu, unsigned int *virq) { int result; unsigned long outlet; @@ -103,12 +228,10 @@ int ps3_alloc_event_irq(unsigned int *virq) return result; } - *virq = irq_create_mapping(NULL, outlet); - - pr_debug("%s:%d: outlet %lu, virq %u\n", __func__, __LINE__, outlet, - *virq); + result = ps3_connect_irq(cpu, outlet, virq); + BUG_ON(result); - return 0; + return result; } int ps3_free_event_irq(unsigned int virq) @@ -123,7 +246,7 @@ int ps3_free_event_irq(unsigned int virq) pr_debug("%s:%d: lv1_destruct_event_receive_port failed: %s\n", __func__, __LINE__, ps3_result(result)); - irq_dispose_mapping(virq); + ps3_disconnect_irq(virq); pr_debug(" <- %s:%d\n", __func__, __LINE__); return result; @@ -136,6 +259,8 @@ int ps3_send_event_locally(unsigned int virq) /** * ps3_connect_event_irq - Assign a virq to a system bus device. + * @cpu: enum ps3_cpu_binding indicating the cpu the interrupt should be + * serviced on. * @did: The HV device identifier read from the system repository. * @interrupt_id: The device interrupt id read from the system repository. * @virq: The assigned Linux virq. @@ -144,12 +269,13 @@ int ps3_send_event_locally(unsigned int virq) * coresponds to the software interrupt number. */ -int ps3_connect_event_irq(const struct ps3_device_id *did, - unsigned int interrupt_id, unsigned int *virq) +int ps3_connect_event_irq(enum ps3_cpu_binding cpu, + const struct ps3_device_id *did, unsigned int interrupt_id, + unsigned int *virq) { int result; - result = ps3_alloc_event_irq(virq); + result = ps3_alloc_event_irq(cpu, virq); if (result) return result; @@ -196,6 +322,8 @@ int ps3_disconnect_event_irq(const struct ps3_device_id *did, /** * ps3_alloc_vuart_irq - Configure the system virtual uart virq. + * @cpu: enum ps3_cpu_binding indicating the cpu the interrupt should be + * serviced on. * @virt_addr_bmp: The caller supplied virtual uart interrupt bitmap. * @virq: The assigned Linux virq. * @@ -203,13 +331,14 @@ int ps3_disconnect_event_irq(const struct ps3_device_id *did, * freeing the interrupt will return a wrong state error. */ -int ps3_alloc_vuart_irq(void* virt_addr_bmp, unsigned int *virq) +int ps3_alloc_vuart_irq(enum ps3_cpu_binding cpu, void* virt_addr_bmp, + unsigned int *virq) { int result; unsigned long outlet; - unsigned long lpar_addr; + u64 lpar_addr; - BUG_ON(!is_kernel_addr((unsigned long)virt_addr_bmp)); + BUG_ON(!is_kernel_addr((u64)virt_addr_bmp)); lpar_addr = ps3_mm_phys_to_lpar(__pa(virt_addr_bmp)); @@ -221,12 +350,10 @@ int ps3_alloc_vuart_irq(void* virt_addr_bmp, unsigned int *virq) return result; } - *virq = irq_create_mapping(NULL, outlet); - - pr_debug("%s:%d: outlet %lu, virq %u\n", __func__, __LINE__, - outlet, *virq); + result = ps3_connect_irq(cpu, outlet, virq); + BUG_ON(result); - return 0; + return result; } int ps3_free_vuart_irq(unsigned int virq) @@ -241,21 +368,23 @@ int ps3_free_vuart_irq(unsigned int virq) return result; } - irq_dispose_mapping(virq); + ps3_disconnect_irq(virq); return result; } /** * ps3_alloc_spe_irq - Configure an spe virq. + * @cpu: enum ps3_cpu_binding indicating the cpu the interrupt should be + * serviced on. * @spe_id: The spe_id returned from lv1_construct_logical_spe(). * @class: The spe interrupt class {0,1,2}. * @virq: The assigned Linux virq. * */ -int ps3_alloc_spe_irq(unsigned long spe_id, unsigned int class, - unsigned int *virq) +int ps3_alloc_spe_irq(enum ps3_cpu_binding cpu, unsigned long spe_id, + unsigned int class, unsigned int *virq) { int result; unsigned long outlet; @@ -270,74 +399,23 @@ int ps3_alloc_spe_irq(unsigned long spe_id, unsigned int class, return result; } - *virq = irq_create_mapping(NULL, outlet); - - pr_debug("%s:%d: spe_id %lu, class %u, outlet %lu, virq %u\n", - __func__, __LINE__, spe_id, class, outlet, *virq); + result = ps3_connect_irq(cpu, outlet, virq); + BUG_ON(result); - return 0; + return result; } int ps3_free_spe_irq(unsigned int virq) { - irq_dispose_mapping(virq); + ps3_disconnect_irq(virq); return 0; } #define PS3_INVALID_OUTLET ((irq_hw_number_t)-1) #define PS3_PLUG_MAX 63 -/** - * struct ps3_bmp - a per cpu irq status and mask bitmap structure - * @status: 256 bit status bitmap indexed by plug - * @unused_1: - * @mask: 256 bit mask bitmap indexed by plug - * @unused_2: - * @lock: - * @ipi_debug_brk_mask: - * - * The HV mantains per SMT thread mappings of HV outlet to HV plug on - * behalf of the guest. These mappings are implemented as 256 bit guest - * supplied bitmaps indexed by plug number. The address of the bitmaps are - * registered with the HV through lv1_configure_irq_state_bitmap(). - * - * The HV supports 256 plugs per thread, assigned as {0..255}, for a total - * of 512 plugs supported on a processor. To simplify the logic this - * implementation equates HV plug value to linux virq value, constrains each - * interrupt to have a system wide unique plug number, and limits the range - * of the plug values to map into the first dword of the bitmaps. This - * gives a usable range of plug values of {NUM_ISA_INTERRUPTS..63}. Note - * that there is no constraint on how many in this set an individual thread - * can aquire. - */ - -struct ps3_bmp { - struct { - unsigned long status; - unsigned long unused_1[3]; - unsigned long mask; - unsigned long unused_2[3]; - } __attribute__ ((aligned (64))); - - spinlock_t lock; - unsigned long ipi_debug_brk_mask; -}; - -/** - * struct ps3_private - a per cpu data structure - * @bmp: ps3_bmp structure - * @node: HV logical_ppe_id - * @cpu: HV thread_id - */ - -struct ps3_private { - struct ps3_bmp bmp; - unsigned long node; - unsigned int cpu; -}; - #if defined(DEBUG) -static void _dump_64_bmp(const char *header, const unsigned long *p, unsigned cpu, +static void _dump_64_bmp(const char *header, const u64 *p, unsigned cpu, const char* func, int line) { pr_debug("%s:%d: %s %u {%04lx_%04lx_%04lx_%04lx}\n", @@ -347,7 +425,7 @@ static void _dump_64_bmp(const char *header, const unsigned long *p, unsigned cp } static void __attribute__ ((unused)) _dump_256_bmp(const char *header, - const unsigned long *p, unsigned cpu, const char* func, int line) + const u64 *p, unsigned cpu, const char* func, int line) { pr_debug("%s:%d: %s %u {%016lx:%016lx:%016lx:%016lx}\n", func, line, header, cpu, p[0], p[1], p[2], p[3]); @@ -381,9 +459,9 @@ static void dump_bmp(struct ps3_private* pd) {}; static void ps3_chip_mask(unsigned int virq) { struct ps3_private *pd = get_irq_chip_data(virq); - unsigned long bit = 0x8000000000000000UL >> virq; - unsigned long *p = &pd->bmp.mask; - unsigned long old; + u64 bit = 0x8000000000000000UL >> virq; + u64 *p = &pd->bmp.mask; + u64 old; unsigned long flags; pr_debug("%s:%d: cpu %u, virq %d\n", __func__, __LINE__, pd->cpu, virq); @@ -405,9 +483,9 @@ static void ps3_chip_mask(unsigned int virq) static void ps3_chip_unmask(unsigned int virq) { struct ps3_private *pd = get_irq_chip_data(virq); - unsigned long bit = 0x8000000000000000UL >> virq; - unsigned long *p = &pd->bmp.mask; - unsigned long old; + u64 bit = 0x8000000000000000UL >> virq; + u64 *p = &pd->bmp.mask; + u64 old; unsigned long flags; pr_debug("%s:%d: cpu %u, virq %d\n", __func__, __LINE__, pd->cpu, virq); @@ -441,45 +519,18 @@ static struct irq_chip irq_chip = { static void ps3_host_unmap(struct irq_host *h, unsigned int virq) { - int result; - const struct ps3_private *pd = get_irq_chip_data(virq); - - pr_debug("%s:%d: node %lu, cpu %d, virq %u\n", __func__, __LINE__, - pd->node, pd->cpu, virq); - - lv1_disconnect_irq_plug_ext(pd->node, pd->cpu, virq); - - result = set_irq_chip_data(virq, NULL); - BUG_ON(result); + set_irq_chip_data(virq, NULL); } -static DEFINE_PER_CPU(struct ps3_private, ps3_private); - static int ps3_host_map(struct irq_host *h, unsigned int virq, irq_hw_number_t hwirq) { - int result; - struct ps3_private *pd = &__get_cpu_var(ps3_private); - - pr_debug("%s:%d: node %lu, cpu %d, hwirq %lu => virq %u\n", __func__, - __LINE__, pd->node, pd->cpu, hwirq, virq); - - /* Binds this virq to pd->cpu (current cpu) */ - - result = lv1_connect_irq_plug_ext(pd->node, pd->cpu, virq, hwirq, 0); - - if (result) { - pr_info("%s:%d: lv1_connect_irq_plug_ext failed:" - " %s\n", __func__, __LINE__, ps3_result(result)); - return -EPERM; - } - - result = set_irq_chip_data(virq, pd); - BUG_ON(result); + pr_debug("%s:%d: hwirq %lu, virq %u\n", __func__, __LINE__, hwirq, + virq); set_irq_chip_and_handler(virq, &irq_chip, handle_fasteoi_irq); - return result; + return 0; } static struct irq_host_ops ps3_host_ops = { @@ -500,7 +551,7 @@ void __init ps3_register_ipi_debug_brk(unsigned int cpu, unsigned int virq) unsigned int ps3_get_irq(void) { struct ps3_private *pd = &__get_cpu_var(ps3_private); - unsigned long x = (pd->bmp.status & pd->bmp.mask); + u64 x = (pd->bmp.status & pd->bmp.mask); unsigned int plug; /* check for ipi break first to stop this cpu ASAP */ diff --git a/arch/powerpc/platforms/ps3/smp.c b/arch/powerpc/platforms/ps3/smp.c index 11d2080607ed..bde71b0572bd 100644 --- a/arch/powerpc/platforms/ps3/smp.c +++ b/arch/powerpc/platforms/ps3/smp.c @@ -111,7 +111,7 @@ static void __init ps3_smp_setup_cpu(int cpu) BUILD_BUG_ON(PPC_MSG_DEBUGGER_BREAK != 3); for (i = 0; i < MSG_COUNT; i++) { - result = ps3_alloc_event_irq(&virqs[i]); + result = ps3_alloc_event_irq(cpu, &virqs[i]); if (result) continue; diff --git a/arch/powerpc/platforms/ps3/spu.c b/arch/powerpc/platforms/ps3/spu.c index ed88dc6a7f2f..9f6edc58568d 100644 --- a/arch/powerpc/platforms/ps3/spu.c +++ b/arch/powerpc/platforms/ps3/spu.c @@ -267,20 +267,20 @@ static int __init setup_interrupts(struct spu *spu) { int result; - result = ps3_alloc_spe_irq(spu_pdata(spu)->spe_id, 0, - &spu->irqs[0]); + result = ps3_alloc_spe_irq(PS3_BINDING_CPU_ANY, spu_pdata(spu)->spe_id, + 0, &spu->irqs[0]); if (result) goto fail_alloc_0; - result = ps3_alloc_spe_irq(spu_pdata(spu)->spe_id, 1, - &spu->irqs[1]); + result = ps3_alloc_spe_irq(PS3_BINDING_CPU_ANY, spu_pdata(spu)->spe_id, + 1, &spu->irqs[1]); if (result) goto fail_alloc_1; - result = ps3_alloc_spe_irq(spu_pdata(spu)->spe_id, 2, - &spu->irqs[2]); + result = ps3_alloc_spe_irq(PS3_BINDING_CPU_ANY, spu_pdata(spu)->spe_id, + 2, &spu->irqs[2]); if (result) goto fail_alloc_2; -- cgit v1.2.3 From b1eeb38e456281c37bbfc270a6ca08605b7e7045 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 26 Jan 2007 19:08:12 -0800 Subject: [POWERPC] ps3: add interrupt alloc for outlets PS3 interrupt core update: - Add ps3_alloc_irq() and ps3_free_irq(), to allocate a virtual interrupt number for an interrupt outlet, which is needed by the PS3 GPU frame buffer device and audio drivers Signed-off-by: Geert Uytterhoeven Signed-off-by: Geoff Levand Acked-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/ps3/interrupt.c | 24 ++++++++++++++---------- 1 file changed, 14 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/ps3/interrupt.c b/arch/powerpc/platforms/ps3/interrupt.c index 27afd1f0358a..3735cd14f614 100644 --- a/arch/powerpc/platforms/ps3/interrupt.c +++ b/arch/powerpc/platforms/ps3/interrupt.c @@ -85,7 +85,7 @@ struct ps3_private { static DEFINE_PER_CPU(struct ps3_private, ps3_private); -static int ps3_connect_irq(enum ps3_cpu_binding cpu, unsigned long outlet, +int ps3_alloc_irq(enum ps3_cpu_binding cpu, unsigned long outlet, unsigned int *virq) { int result; @@ -138,8 +138,9 @@ fail_connect: fail_create: return result; } +EXPORT_SYMBOL_GPL(ps3_alloc_irq); -static void ps3_disconnect_irq(unsigned int virq) +int ps3_free_irq(unsigned int virq) { int result; const struct ps3_private *pd = get_irq_chip_data(virq); @@ -155,7 +156,9 @@ static void ps3_disconnect_irq(unsigned int virq) set_irq_chip_data(virq, NULL); irq_dispose_mapping(virq); + return result; } +EXPORT_SYMBOL_GPL(ps3_free_irq); /** * ps3_alloc_io_irq - Assign a virq to a system bus device. @@ -182,7 +185,7 @@ int ps3_alloc_io_irq(enum ps3_cpu_binding cpu, unsigned int interrupt_id, return result; } - result = ps3_connect_irq(cpu, outlet, virq); + result = ps3_alloc_irq(cpu, outlet, virq); BUG_ON(result); return result; @@ -198,7 +201,7 @@ int ps3_free_io_irq(unsigned int virq) pr_debug("%s:%d: lv1_destruct_io_irq_outlet failed: %s\n", __func__, __LINE__, ps3_result(result)); - ps3_disconnect_irq(virq); + ps3_free_irq(virq); return result; } @@ -228,7 +231,7 @@ int ps3_alloc_event_irq(enum ps3_cpu_binding cpu, unsigned int *virq) return result; } - result = ps3_connect_irq(cpu, outlet, virq); + result = ps3_alloc_irq(cpu, outlet, virq); BUG_ON(result); return result; @@ -246,7 +249,7 @@ int ps3_free_event_irq(unsigned int virq) pr_debug("%s:%d: lv1_destruct_event_receive_port failed: %s\n", __func__, __LINE__, ps3_result(result)); - ps3_disconnect_irq(virq); + ps3_free_irq(virq); pr_debug(" <- %s:%d\n", __func__, __LINE__); return result; @@ -350,7 +353,7 @@ int ps3_alloc_vuart_irq(enum ps3_cpu_binding cpu, void* virt_addr_bmp, return result; } - result = ps3_connect_irq(cpu, outlet, virq); + result = ps3_alloc_irq(cpu, outlet, virq); BUG_ON(result); return result; @@ -368,7 +371,7 @@ int ps3_free_vuart_irq(unsigned int virq) return result; } - ps3_disconnect_irq(virq); + ps3_free_irq(virq); return result; } @@ -399,7 +402,7 @@ int ps3_alloc_spe_irq(enum ps3_cpu_binding cpu, unsigned long spe_id, return result; } - result = ps3_connect_irq(cpu, outlet, virq); + result = ps3_alloc_irq(cpu, outlet, virq); BUG_ON(result); return result; @@ -407,10 +410,11 @@ int ps3_alloc_spe_irq(enum ps3_cpu_binding cpu, unsigned long spe_id, int ps3_free_spe_irq(unsigned int virq) { - ps3_disconnect_irq(virq); + ps3_free_irq(virq); return 0; } + #define PS3_INVALID_OUTLET ((irq_hw_number_t)-1) #define PS3_PLUG_MAX 63 -- cgit v1.2.3 From 577157659fb0ace3b88dd75e2c6cb1af84b3040d Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Fri, 26 Jan 2007 19:08:16 -0800 Subject: [POWERPC] ps3: fix interrupt bmp Add a comment and a preprocessor macro to help clearify the alignment needs of the PS3 interrupt bitmap. Signed-off-by: Geoff Levand Acked-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/ps3/interrupt.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/ps3/interrupt.c b/arch/powerpc/platforms/ps3/interrupt.c index 3735cd14f614..95b128ba9087 100644 --- a/arch/powerpc/platforms/ps3/interrupt.c +++ b/arch/powerpc/platforms/ps3/interrupt.c @@ -48,6 +48,9 @@ * behalf of the guest. These mappings are implemented as 256 bit guest * supplied bitmaps indexed by plug number. The addresses of the bitmaps * are registered with the HV through lv1_configure_irq_state_bitmap(). + * The HV requires that the 512 bits of status + mask not cross a page + * boundary. PS3_BMP_MINALIGN is used to define this minimal 64 byte + * alignment. * * The HV supports 256 plugs per thread, assigned as {0..255}, for a total * of 512 plugs supported on a processor. To simplify the logic this @@ -59,6 +62,8 @@ * can acquire. */ +#define PS3_BMP_MINALIGN 64 + struct ps3_bmp { struct { u64 status; @@ -78,7 +83,7 @@ struct ps3_bmp { */ struct ps3_private { - struct ps3_bmp bmp __attribute__ ((aligned (64))); + struct ps3_bmp bmp __attribute__ ((aligned (PS3_BMP_MINALIGN))); u64 node; unsigned int cpu; }; -- cgit v1.2.3 From 73d976b33998bca9aa7300e59f5d6c756be38b87 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Fri, 26 Jan 2007 19:08:19 -0800 Subject: [POWERPC] ps3: remove cpuinfo Remove the unneded routine ps3_show_cpuinfo(). The common platform code now prints the same information. Signed-off-by: Geoff Levand Acked-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/ps3/setup.c | 6 ------ 1 file changed, 6 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/ps3/setup.c b/arch/powerpc/platforms/ps3/setup.c index d8b5cadbe80e..8b0569853fcd 100644 --- a/arch/powerpc/platforms/ps3/setup.c +++ b/arch/powerpc/platforms/ps3/setup.c @@ -41,11 +41,6 @@ #define DBG(fmt...) do{if(0)printk(fmt);}while(0) #endif -static void ps3_show_cpuinfo(struct seq_file *m) -{ - seq_printf(m, "machine\t\t: %s\n", ppc_md.name); -} - static void ps3_power_save(void) { /* @@ -156,7 +151,6 @@ define_machine(ps3) { .name = "PS3", .probe = ps3_probe, .setup_arch = ps3_setup_arch, - .show_cpuinfo = ps3_show_cpuinfo, .init_IRQ = ps3_init_IRQ, .panic = ps3_panic, .get_boot_time = ps3_get_boot_time, -- cgit v1.2.3 From 66b44954f8f2129a39d145991c8e635046a71be6 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Fri, 26 Jan 2007 19:08:21 -0800 Subject: [POWERPC] ps3: get firmware version Add a new routine ps3_get_firmware_version() and use it to output the firmware version to dmesg. Signed-off-by: Geoff Levand Acked-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/ps3/setup.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/platforms/ps3/setup.c b/arch/powerpc/platforms/ps3/setup.c index 8b0569853fcd..cb91a81352bf 100644 --- a/arch/powerpc/platforms/ps3/setup.c +++ b/arch/powerpc/platforms/ps3/setup.c @@ -32,6 +32,7 @@ #include #include #include +#include #include "platform.h" @@ -41,6 +42,19 @@ #define DBG(fmt...) do{if(0)printk(fmt);}while(0) #endif +int ps3_get_firmware_version(union ps3_firmware_version *v) +{ + int result = lv1_get_version_info(&v->raw); + + if (result) { + v->raw = 0; + return -1; + } + + return result; +} +EXPORT_SYMBOL_GPL(ps3_get_firmware_version); + static void ps3_power_save(void) { /* @@ -69,8 +83,14 @@ static void ps3_panic(char *str) static void __init ps3_setup_arch(void) { + union ps3_firmware_version v; + DBG(" -> %s:%d\n", __func__, __LINE__); + ps3_get_firmware_version(&v); + printk(KERN_INFO "PS3 firmware version %u.%u.%u\n", v.major, v.minor, + v.rev); + ps3_spu_set_platform(); ps3_map_htab(); -- cgit v1.2.3 From 098e27442713ef7921533130ebba5db6ef64aba6 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 26 Jan 2007 19:08:24 -0800 Subject: [POWERPC] ps3: get av_multi_out params Allow the PS3 AV settings driver to access the default video mode stored in the OS area. Signed-off-by: Geert Uytterhoeven Signed-off-by: Geoff Levand Acked-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/ps3/os-area.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/ps3/os-area.c b/arch/powerpc/platforms/ps3/os-area.c index b4ac924ada43..6d0d2ac39bd8 100644 --- a/arch/powerpc/platforms/ps3/os-area.c +++ b/arch/powerpc/platforms/ps3/os-area.c @@ -66,13 +66,6 @@ enum { PARAM_BOOT_FLAG_OTHER_OS = 1, }; -enum { - PARAM_AV_MULTI_OUT_NTSC = 0, - PARAM_AV_MULTI_OUT_PAL_RGB = 1, - PARAM_AV_MULTI_OUT_PAL_YCBCR = 2, - PARAM_AV_MULTI_OUT_SECAM = 3, -}; - enum { PARAM_CTRL_BUTTON_O_IS_YES = 0, PARAM_CTRL_BUTTON_X_IS_YES = 1, @@ -257,3 +250,13 @@ u64 ps3_os_area_rtc_diff(void) { return saved_params.rtc_diff ? saved_params.rtc_diff : 946684800UL; } + +/** + * ps3_os_area_get_av_multi_out - Returns the default video mode. + */ + +enum ps3_param_av_multi_out ps3_os_area_get_av_multi_out(void) +{ + return saved_params.av_multi_out; +} +EXPORT_SYMBOL_GPL(ps3_os_area_get_av_multi_out); -- cgit v1.2.3 From 5f3162f0664be49c72c1e6ce4a46848f9d96d790 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Fri, 26 Jan 2007 19:08:29 -0800 Subject: [POWERPC] ps3: ps3_defconfig updates Updates for ps3_defconfig. Signed-off-by: Geoff Levand Acked-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/configs/ps3_defconfig | 225 ++++++++++++++++++++++++++++++++----- 1 file changed, 200 insertions(+), 25 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig index 32560876c3dc..4d04ab26ce30 100644 --- a/arch/powerpc/configs/ps3_defconfig +++ b/arch/powerpc/configs/ps3_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20-rc5 -# Mon Jan 22 22:29:11 2007 +# Linux kernel version: 2.6.20-rc6 +# Thu Jan 25 13:35:34 2007 # CONFIG_PPC64=y CONFIG_64BIT=y @@ -70,10 +70,10 @@ CONFIG_SYSVIPC=y CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -# CONFIG_SYSCTL_SYSCALL is not set +# CONFIG_EMBEDDED is not set +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y @@ -160,7 +160,7 @@ CONFIG_SPU_BASE=y # PS3 Platform Options # CONFIG_PS3_HTAB_SIZE=20 -CONFIG_PS3_DYNAMIC_DMA=y +# CONFIG_PS3_DYNAMIC_DMA is not set CONFIG_PS3_USE_LPAR_ADDR=y CONFIG_PS3_VUART=y @@ -207,7 +207,7 @@ CONFIG_PPC_64K_PAGES=y # CONFIG_SCHED_SMT is not set CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="root=/dev/nfs rw ip=dhcp" +CONFIG_CMDLINE="root=/dev/sda1 ip=dhcp" # CONFIG_PM is not set # CONFIG_SECCOMP is not set CONFIG_ISA_DMA_API=y @@ -240,7 +240,8 @@ CONFIG_NET=y # Networking options # # CONFIG_NETDEBUG is not set -# CONFIG_PACKET is not set +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -353,6 +354,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set @@ -380,10 +382,11 @@ CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # -# CONFIG_BLK_DEV_SD is not set +CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set -# CONFIG_BLK_DEV_SR is not set +CONFIG_BLK_DEV_SR=y +# CONFIG_BLK_DEV_SR_VENDOR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set @@ -456,6 +459,7 @@ CONFIG_NETDEVICES=y # Ethernet (10 or 100Mbit) # # CONFIG_NET_ETHERNET is not set +CONFIG_MII=y # # Ethernet (1000 Mbit) @@ -504,10 +508,13 @@ CONFIG_INPUT=y # # Userland interfaces # -# CONFIG_INPUT_MOUSEDEV is not set +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_TSDEV is not set -CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set # @@ -598,6 +605,7 @@ CONFIG_GEN_RTC=y # Digital Video Broadcasting Devices # # CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set # # Graphics support @@ -626,14 +634,131 @@ CONFIG_HID=y # # USB support # -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +CONFIG_USB_DEBUG=y + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_SPLIT_ISO is not set +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_HCD_PPC_OF is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # +# +# may also be needed; see USB_STORAGE Help for more information +# +# CONFIG_USB_STORAGE is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_TOUCHSCREEN is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +CONFIG_USB_USBNET_MII=y +CONFIG_USB_USBNET=y +CONFIG_USB_NET_CDCETHER=y +# CONFIG_USB_NET_GL620A is not set +# CONFIG_USB_NET_NET1080 is not set +# CONFIG_USB_NET_PLUSB is not set +CONFIG_USB_NET_MCS7830=y +# CONFIG_USB_NET_RNDIS_HOST is not set +# CONFIG_USB_NET_CDC_SUBSET is not set +# CONFIG_USB_NET_ZAURUS is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set + +# +# USB DSL modem support +# + # # USB Gadget Support # @@ -691,8 +816,14 @@ CONFIG_HID=y # File systems # # CONFIG_EXT2_FS is not set -# CONFIG_EXT3_FS is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set @@ -712,8 +843,11 @@ CONFIG_DNOTIFY=y # # CD-ROM/DVD Filesystems # -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +# CONFIG_ZISOFS is not set +CONFIG_UDF_FS=y +CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems @@ -785,7 +919,46 @@ CONFIG_MSDOS_PARTITION=y # # Native Language Support # -# CONFIG_NLS is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set # # Distributed Lock Manager @@ -795,9 +968,10 @@ CONFIG_MSDOS_PARTITION=y # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set -# CONFIG_CRC32 is not set +CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_PLIST=y CONFIG_IOMAP_COPY=y @@ -821,22 +995,23 @@ CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=17 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_SLAB=y +# CONFIG_DEBUG_SLAB_LEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set CONFIG_DEBUG_SPINLOCK=y -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_RWSEMS is not set +CONFIG_DEBUG_MUTEXES=y +CONFIG_DEBUG_RWSEMS=y CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set CONFIG_DEBUG_LIST=y CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_DEBUG_STACKOVERFLOW is not set +CONFIG_DEBUG_STACKOVERFLOW=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUGGER is not set CONFIG_IRQSTACKS=y -- cgit v1.2.3 From 4942bd80e83d13bf394df4a8109bee39d861820f Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Sat, 27 Jan 2007 17:41:49 -0600 Subject: [POWERPC] Fix array indexing error in rheap grow() The grow() function in the rheap library allocates a larger array of blocks, copies the contents of the old blocks array to the newly allocated array and fixes the list_head pointers after the copy. At the end, the new blocks must be enqueued to the empty_list of the rh_info_t structure. This patch fixes a bug where the code was indexing past the end of the array when enqueueing blocks. The UCC ethernet driver, which uses the rheap allocator, experiences kernel panics because of this bug. Signed-off-by: Ionut Nicu Signed-off-by: Timur Tabi Signed-off-by: Paul Mackerras --- arch/powerpc/lib/rheap.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/lib/rheap.c b/arch/powerpc/lib/rheap.c index 57bf991ccd6e..4bbda6b2be45 100644 --- a/arch/powerpc/lib/rheap.c +++ b/arch/powerpc/lib/rheap.c @@ -85,7 +85,8 @@ static int grow(rh_info_t * info, int max_blocks) info->flags &= ~RHIF_STATIC_BLOCK; /* add all new blocks to the free list */ - for (i = 0, blk = block + info->max_blocks; i < new_blocks; i++, blk++) + blk = block + info->max_blocks - new_blocks; + for (i = 0; i < new_blocks; i++, blk++) list_add(&blk->list, &info->empty_list); return 0; -- cgit v1.2.3 From c69b767a2c871bb80cb9e346d6ebce248f711dfb Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Sun, 28 Jan 2007 21:23:14 -0600 Subject: [POWERPC] Oprofile cleanup Clean up the ctr_read/write a bit. It's currently defined in the include but only used in one C file each. The only exception is the classic version, so keep that in the include and define in the C file as appropriate. Signed-off-by: Olof Johansson Signed-off-by: Paul Mackerras --- arch/powerpc/oprofile/op_model_7450.c | 10 ++-- arch/powerpc/oprofile/op_model_fsl_booke.c | 81 ++++++++++++++++++++++++++++++ arch/powerpc/oprofile/op_model_power4.c | 10 ++-- arch/powerpc/oprofile/op_model_rs64.c | 10 ++-- 4 files changed, 96 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/oprofile/op_model_7450.c b/arch/powerpc/oprofile/op_model_7450.c index f481c0ed5e67..5d1bbaf35ccb 100644 --- a/arch/powerpc/oprofile/op_model_7450.c +++ b/arch/powerpc/oprofile/op_model_7450.c @@ -137,9 +137,9 @@ static void fsl7450_start(struct op_counter_config *ctr) for (i = 0; i < NUM_CTRS; ++i) { if (ctr[i].enabled) - ctr_write(i, reset_value[i]); + classic_ctr_write(i, reset_value[i]); else - ctr_write(i, 0); + classic_ctr_write(i, 0); } /* Clear the freeze bit, and enable the interrupt. @@ -179,13 +179,13 @@ static void fsl7450_handle_interrupt(struct pt_regs *regs, is_kernel = is_kernel_addr(pc); for (i = 0; i < NUM_CTRS; ++i) { - val = ctr_read(i); + val = classic_ctr_read(i); if (val < 0) { if (oprofile_running && ctr[i].enabled) { oprofile_add_ext_sample(pc, regs, i, is_kernel); - ctr_write(i, reset_value[i]); + classic_ctr_write(i, reset_value[i]); } else { - ctr_write(i, 0); + classic_ctr_write(i, 0); } } } diff --git a/arch/powerpc/oprofile/op_model_fsl_booke.c b/arch/powerpc/oprofile/op_model_fsl_booke.c index 0b3c31f5209e..2267eb8c661b 100644 --- a/arch/powerpc/oprofile/op_model_fsl_booke.c +++ b/arch/powerpc/oprofile/op_model_fsl_booke.c @@ -32,6 +32,87 @@ static unsigned long reset_value[OP_MAX_COUNTER]; static int num_counters; static int oprofile_running; +static inline u32 get_pmlca(int ctr) +{ + u32 pmlca; + + switch (ctr) { + case 0: + pmlca = mfpmr(PMRN_PMLCA0); + break; + case 1: + pmlca = mfpmr(PMRN_PMLCA1); + break; + case 2: + pmlca = mfpmr(PMRN_PMLCA2); + break; + case 3: + pmlca = mfpmr(PMRN_PMLCA3); + break; + default: + panic("Bad ctr number\n"); + } + + return pmlca; +} + +static inline void set_pmlca(int ctr, u32 pmlca) +{ + switch (ctr) { + case 0: + mtpmr(PMRN_PMLCA0, pmlca); + break; + case 1: + mtpmr(PMRN_PMLCA1, pmlca); + break; + case 2: + mtpmr(PMRN_PMLCA2, pmlca); + break; + case 3: + mtpmr(PMRN_PMLCA3, pmlca); + break; + default: + panic("Bad ctr number\n"); + } +} + +static inline unsigned int ctr_read(unsigned int i) +{ + switch(i) { + case 0: + return mfpmr(PMRN_PMC0); + case 1: + return mfpmr(PMRN_PMC1); + case 2: + return mfpmr(PMRN_PMC2); + case 3: + return mfpmr(PMRN_PMC3); + default: + return 0; + } +} + +static inline void ctr_write(unsigned int i, unsigned int val) +{ + switch(i) { + case 0: + mtpmr(PMRN_PMC0, val); + break; + case 1: + mtpmr(PMRN_PMC1, val); + break; + case 2: + mtpmr(PMRN_PMC2, val); + break; + case 3: + mtpmr(PMRN_PMC3, val); + break; + default: + break; + } +} + + static void init_pmc_stop(int ctr) { u32 pmlca = (PMLCA_FC | PMLCA_FCS | PMLCA_FCU | diff --git a/arch/powerpc/oprofile/op_model_power4.c b/arch/powerpc/oprofile/op_model_power4.c index 356709d515b9..fe597a154d4f 100644 --- a/arch/powerpc/oprofile/op_model_power4.c +++ b/arch/powerpc/oprofile/op_model_power4.c @@ -121,9 +121,9 @@ static void power4_start(struct op_counter_config *ctr) for (i = 0; i < cur_cpu_spec->num_pmcs; ++i) { if (ctr[i].enabled) { - ctr_write(i, reset_value[i]); + classic_ctr_write(i, reset_value[i]); } else { - ctr_write(i, 0); + classic_ctr_write(i, 0); } } @@ -254,13 +254,13 @@ static void power4_handle_interrupt(struct pt_regs *regs, mtmsrd(mfmsr() | MSR_PMM); for (i = 0; i < cur_cpu_spec->num_pmcs; ++i) { - val = ctr_read(i); + val = classic_ctr_read(i); if (val < 0) { if (oprofile_running && ctr[i].enabled) { oprofile_add_ext_sample(pc, regs, i, is_kernel); - ctr_write(i, reset_value[i]); + classic_ctr_write(i, reset_value[i]); } else { - ctr_write(i, 0); + classic_ctr_write(i, 0); } } } diff --git a/arch/powerpc/oprofile/op_model_rs64.c b/arch/powerpc/oprofile/op_model_rs64.c index 19c5ee089bc9..c731acbfb2a5 100644 --- a/arch/powerpc/oprofile/op_model_rs64.c +++ b/arch/powerpc/oprofile/op_model_rs64.c @@ -137,10 +137,10 @@ static void rs64_start(struct op_counter_config *ctr) for (i = 0; i < num_counters; ++i) { if (ctr[i].enabled) { - ctr_write(i, reset_value[i]); + classic_ctr_write(i, reset_value[i]); ctrl_write(i, ctr[i].event); } else { - ctr_write(i, 0); + classic_ctr_write(i, 0); } } @@ -186,13 +186,13 @@ static void rs64_handle_interrupt(struct pt_regs *regs, mtmsrd(mfmsr() | MSR_PMM); for (i = 0; i < num_counters; ++i) { - val = ctr_read(i); + val = classic_ctr_read(i); if (val < 0) { if (ctr[i].enabled) { oprofile_add_ext_sample(pc, regs, i, is_kernel); - ctr_write(i, reset_value[i]); + classic_ctr_write(i, reset_value[i]); } else { - ctr_write(i, 0); + classic_ctr_write(i, 0); } } } -- cgit v1.2.3 From 1bd2e5ae18a8f93333707d81d3dbd9209a255137 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Sun, 28 Jan 2007 21:23:54 -0600 Subject: [POWERPC] Add PMC type to cputable Add cputable entries for which type of PMC implementation the processor has. I've only filled in the current 64-bit processors, the unfilled default value will have same behaviour as before so it can be done over time as needed. Also tidy up the dummy_perf implementation a bit, aggregating it into one function with ifdefs instead of several. Signed-off-by: Olof Johansson Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/cputable.c | 17 +++++++++++++++++ arch/powerpc/kernel/pmc.c | 35 +++++++++-------------------------- 2 files changed, 26 insertions(+), 26 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index b742013bb9da..4939b3d56dfb 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -86,6 +86,7 @@ static struct cpu_spec cpu_specs[] = { .icache_bsize = 128, .dcache_bsize = 128, .num_pmcs = 8, + .pmc_type = PPC_PMC_IBM, .oprofile_cpu_type = "ppc64/power3", .oprofile_type = PPC_OPROFILE_RS64, .platform = "power3", @@ -99,6 +100,7 @@ static struct cpu_spec cpu_specs[] = { .icache_bsize = 128, .dcache_bsize = 128, .num_pmcs = 8, + .pmc_type = PPC_PMC_IBM, .oprofile_cpu_type = "ppc64/power3", .oprofile_type = PPC_OPROFILE_RS64, .platform = "power3", @@ -112,6 +114,7 @@ static struct cpu_spec cpu_specs[] = { .icache_bsize = 128, .dcache_bsize = 128, .num_pmcs = 8, + .pmc_type = PPC_PMC_IBM, .oprofile_cpu_type = "ppc64/rs64", .oprofile_type = PPC_OPROFILE_RS64, .platform = "rs64", @@ -125,6 +128,7 @@ static struct cpu_spec cpu_specs[] = { .icache_bsize = 128, .dcache_bsize = 128, .num_pmcs = 8, + .pmc_type = PPC_PMC_IBM, .oprofile_cpu_type = "ppc64/rs64", .oprofile_type = PPC_OPROFILE_RS64, .platform = "rs64", @@ -138,6 +142,7 @@ static struct cpu_spec cpu_specs[] = { .icache_bsize = 128, .dcache_bsize = 128, .num_pmcs = 8, + .pmc_type = PPC_PMC_IBM, .oprofile_cpu_type = "ppc64/rs64", .oprofile_type = PPC_OPROFILE_RS64, .platform = "rs64", @@ -151,6 +156,7 @@ static struct cpu_spec cpu_specs[] = { .icache_bsize = 128, .dcache_bsize = 128, .num_pmcs = 8, + .pmc_type = PPC_PMC_IBM, .oprofile_cpu_type = "ppc64/rs64", .oprofile_type = PPC_OPROFILE_RS64, .platform = "rs64", @@ -164,6 +170,7 @@ static struct cpu_spec cpu_specs[] = { .icache_bsize = 128, .dcache_bsize = 128, .num_pmcs = 8, + .pmc_type = PPC_PMC_IBM, .oprofile_cpu_type = "ppc64/power4", .oprofile_type = PPC_OPROFILE_POWER4, .platform = "power4", @@ -177,6 +184,7 @@ static struct cpu_spec cpu_specs[] = { .icache_bsize = 128, .dcache_bsize = 128, .num_pmcs = 8, + .pmc_type = PPC_PMC_IBM, .oprofile_cpu_type = "ppc64/power4", .oprofile_type = PPC_OPROFILE_POWER4, .platform = "power4", @@ -191,6 +199,7 @@ static struct cpu_spec cpu_specs[] = { .icache_bsize = 128, .dcache_bsize = 128, .num_pmcs = 8, + .pmc_type = PPC_PMC_IBM, .cpu_setup = __setup_cpu_ppc970, .cpu_restore = __restore_cpu_ppc970, .oprofile_cpu_type = "ppc64/970", @@ -207,6 +216,7 @@ static struct cpu_spec cpu_specs[] = { .icache_bsize = 128, .dcache_bsize = 128, .num_pmcs = 8, + .pmc_type = PPC_PMC_IBM, .cpu_setup = __setup_cpu_ppc970, .cpu_restore = __restore_cpu_ppc970, .oprofile_cpu_type = "ppc64/970", @@ -239,6 +249,7 @@ static struct cpu_spec cpu_specs[] = { .icache_bsize = 128, .dcache_bsize = 128, .num_pmcs = 8, + .pmc_type = PPC_PMC_IBM, .cpu_setup = __setup_cpu_ppc970, .oprofile_cpu_type = "ppc64/970", .oprofile_type = PPC_OPROFILE_POWER4, @@ -253,6 +264,7 @@ static struct cpu_spec cpu_specs[] = { .icache_bsize = 128, .dcache_bsize = 128, .num_pmcs = 6, + .pmc_type = PPC_PMC_IBM, .oprofile_cpu_type = "ppc64/power5", .oprofile_type = PPC_OPROFILE_POWER4, /* SIHV / SIPR bits are implemented on POWER4+ (GQ) @@ -271,6 +283,7 @@ static struct cpu_spec cpu_specs[] = { .icache_bsize = 128, .dcache_bsize = 128, .num_pmcs = 6, + .pmc_type = PPC_PMC_IBM, .oprofile_cpu_type = "ppc64/power5+", .oprofile_type = PPC_OPROFILE_POWER4, .oprofile_mmcra_sihv = MMCRA_SIHV, @@ -321,6 +334,7 @@ static struct cpu_spec cpu_specs[] = { .icache_bsize = 128, .dcache_bsize = 128, .num_pmcs = 6, + .pmc_type = PPC_PMC_IBM, .oprofile_cpu_type = "ppc64/power6", .oprofile_type = PPC_OPROFILE_POWER4, .oprofile_mmcra_sihv = POWER6_MMCRA_SIHV, @@ -340,6 +354,7 @@ static struct cpu_spec cpu_specs[] = { .icache_bsize = 128, .dcache_bsize = 128, .num_pmcs = 4, + .pmc_type = PPC_PMC_IBM, .oprofile_cpu_type = "ppc64/cell-be", .oprofile_type = PPC_OPROFILE_CELL, .platform = "ppc-cell-be", @@ -353,6 +368,7 @@ static struct cpu_spec cpu_specs[] = { .icache_bsize = 64, .dcache_bsize = 64, .num_pmcs = 6, + .pmc_type = PPC_PMC_PA6T, .platform = "pa6t", }, { /* default match */ @@ -364,6 +380,7 @@ static struct cpu_spec cpu_specs[] = { .icache_bsize = 128, .dcache_bsize = 128, .num_pmcs = 6, + .pmc_type = PPC_PMC_IBM, .platform = "power4", } #endif /* CONFIG_PPC64 */ diff --git a/arch/powerpc/kernel/pmc.c b/arch/powerpc/kernel/pmc.c index 3d8f6f44641e..e40f6ddd98a4 100644 --- a/arch/powerpc/kernel/pmc.c +++ b/arch/powerpc/kernel/pmc.c @@ -19,38 +19,21 @@ #include #include -#if defined(CONFIG_FSL_BOOKE) && !defined(CONFIG_E200) -static void dummy_perf(struct pt_regs *regs) -{ - unsigned int pmgc0 = mfpmr(PMRN_PMGC0); - - pmgc0 &= ~PMGC0_PMIE; - mtpmr(PMRN_PMGC0, pmgc0); -} -#elif defined(CONFIG_PPC64) || defined(CONFIG_6xx) - -#ifndef MMCR0_PMAO -#define MMCR0_PMAO 0 +#ifndef MMCR0_PMA0 +#define MMCR0_PMA0 0 #endif -/* Ensure exceptions are disabled */ static void dummy_perf(struct pt_regs *regs) { - unsigned int mmcr0 = mfspr(SPRN_MMCR0); - - mmcr0 &= ~(MMCR0_PMXE|MMCR0_PMAO); - mtspr(SPRN_MMCR0, mmcr0); -} +#if defined(CONFIG_FSL_BOOKE) && !defined(CONFIG_E200) + mtpmr(PMRN_PMGC0, mfpmr(PMRN_PMGC0) & ~PMGC0_PMIE); +#elif defined(CONFIG_PPC64) || defined(CONFIG_6xx) + mtspr(SPRN_MMCR0, mfspr(SPRN_MMCR0) & ~(MMCR0_PMXE|MMCR0_PMA0)); #else -/* Ensure exceptions are disabled */ -static void dummy_perf(struct pt_regs *regs) -{ - unsigned int mmcr0 = mfspr(SPRN_MMCR0); - - mmcr0 &= ~(MMCR0_PMXE); - mtspr(SPRN_MMCR0, mmcr0); -} + mtspr(SPRN_MMCR0, mfspr(SPRN_MMCR0) & ~MMCR0_PMXE); #endif +} + static DEFINE_SPINLOCK(pmc_owner_lock); static void *pmc_owner_caller; /* mostly for debugging */ -- cgit v1.2.3 From 6529c13dfe413e437ad1ed0e97783dcf69137114 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Sun, 28 Jan 2007 21:25:57 -0600 Subject: [POWERPC] PA6T PMC support Support for PA6T-style PMC registers. PMCs are completely implementation-dependent on PPC, and PA6T numbers them differently from the IBM model. Signed-off-by: Olof Johansson Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/pmc.c | 4 +- arch/powerpc/kernel/sysfs.c | 141 +++++++++++++++++++++++++++++--------------- 2 files changed, 95 insertions(+), 50 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/pmc.c b/arch/powerpc/kernel/pmc.c index e40f6ddd98a4..24d7b7c99bb9 100644 --- a/arch/powerpc/kernel/pmc.c +++ b/arch/powerpc/kernel/pmc.c @@ -17,6 +17,7 @@ #include #include +#include #include #ifndef MMCR0_PMA0 @@ -28,7 +29,8 @@ static void dummy_perf(struct pt_regs *regs) #if defined(CONFIG_FSL_BOOKE) && !defined(CONFIG_E200) mtpmr(PMRN_PMGC0, mfpmr(PMRN_PMGC0) & ~PMGC0_PMIE); #elif defined(CONFIG_PPC64) || defined(CONFIG_6xx) - mtspr(SPRN_MMCR0, mfspr(SPRN_MMCR0) & ~(MMCR0_PMXE|MMCR0_PMA0)); + if (cur_cpu_spec->pmc_type == PPC_PMC_IBM) + mtspr(SPRN_MMCR0, mfspr(SPRN_MMCR0) & ~(MMCR0_PMXE|MMCR0_PMA0)); #else mtspr(SPRN_MMCR0, mfspr(SPRN_MMCR0) & ~MMCR0_PMXE); #endif diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c index 400ab2b946e7..d57818aea081 100644 --- a/arch/powerpc/kernel/sysfs.c +++ b/arch/powerpc/kernel/sysfs.c @@ -169,6 +169,11 @@ static ssize_t __attribute_used__ \ return count; \ } + +/* Let's define all possible registers, we'll only hook up the ones + * that are implemented on the current processor + */ + SYSFS_PMCSETUP(mmcr0, SPRN_MMCR0); SYSFS_PMCSETUP(mmcr1, SPRN_MMCR1); SYSFS_PMCSETUP(mmcra, SPRN_MMCRA); @@ -184,55 +189,87 @@ SYSFS_PMCSETUP(purr, SPRN_PURR); SYSFS_PMCSETUP(spurr, SPRN_SPURR); SYSFS_PMCSETUP(dscr, SPRN_DSCR); -static SYSDEV_ATTR(mmcr0, 0600, show_mmcr0, store_mmcr0); -static SYSDEV_ATTR(mmcr1, 0600, show_mmcr1, store_mmcr1); +SYSFS_PMCSETUP(pa6t_pmc0, PA6T_SPRN_PMC0); +SYSFS_PMCSETUP(pa6t_pmc1, PA6T_SPRN_PMC1); +SYSFS_PMCSETUP(pa6t_pmc2, PA6T_SPRN_PMC2); +SYSFS_PMCSETUP(pa6t_pmc3, PA6T_SPRN_PMC3); +SYSFS_PMCSETUP(pa6t_pmc4, PA6T_SPRN_PMC4); +SYSFS_PMCSETUP(pa6t_pmc5, PA6T_SPRN_PMC5); + + static SYSDEV_ATTR(mmcra, 0600, show_mmcra, store_mmcra); -static SYSDEV_ATTR(pmc1, 0600, show_pmc1, store_pmc1); -static SYSDEV_ATTR(pmc2, 0600, show_pmc2, store_pmc2); -static SYSDEV_ATTR(pmc3, 0600, show_pmc3, store_pmc3); -static SYSDEV_ATTR(pmc4, 0600, show_pmc4, store_pmc4); -static SYSDEV_ATTR(pmc5, 0600, show_pmc5, store_pmc5); -static SYSDEV_ATTR(pmc6, 0600, show_pmc6, store_pmc6); -static SYSDEV_ATTR(pmc7, 0600, show_pmc7, store_pmc7); -static SYSDEV_ATTR(pmc8, 0600, show_pmc8, store_pmc8); -static SYSDEV_ATTR(purr, 0600, show_purr, NULL); static SYSDEV_ATTR(spurr, 0600, show_spurr, NULL); static SYSDEV_ATTR(dscr, 0600, show_dscr, store_dscr); +static SYSDEV_ATTR(purr, 0600, show_purr, store_purr); + +static struct sysdev_attribute ibm_common_attrs[] = { + _SYSDEV_ATTR(mmcr0, 0600, show_mmcr0, store_mmcr0), + _SYSDEV_ATTR(mmcr1, 0600, show_mmcr1, store_mmcr1), +}; + +static struct sysdev_attribute ibm_pmc_attrs[] = { + _SYSDEV_ATTR(pmc1, 0600, show_pmc1, store_pmc1), + _SYSDEV_ATTR(pmc2, 0600, show_pmc2, store_pmc2), + _SYSDEV_ATTR(pmc3, 0600, show_pmc3, store_pmc3), + _SYSDEV_ATTR(pmc4, 0600, show_pmc4, store_pmc4), + _SYSDEV_ATTR(pmc5, 0600, show_pmc5, store_pmc5), + _SYSDEV_ATTR(pmc6, 0600, show_pmc6, store_pmc6), + _SYSDEV_ATTR(pmc7, 0600, show_pmc7, store_pmc7), + _SYSDEV_ATTR(pmc8, 0600, show_pmc8, store_pmc8), +}; + +static struct sysdev_attribute pa6t_attrs[] = { + _SYSDEV_ATTR(mmcr0, 0600, show_mmcr0, store_mmcr0), + _SYSDEV_ATTR(mmcr1, 0600, show_mmcr1, store_mmcr1), + _SYSDEV_ATTR(pmc0, 0600, show_pa6t_pmc0, store_pa6t_pmc0), + _SYSDEV_ATTR(pmc1, 0600, show_pa6t_pmc1, store_pa6t_pmc1), + _SYSDEV_ATTR(pmc2, 0600, show_pa6t_pmc2, store_pa6t_pmc2), + _SYSDEV_ATTR(pmc3, 0600, show_pa6t_pmc3, store_pa6t_pmc3), + _SYSDEV_ATTR(pmc4, 0600, show_pa6t_pmc4, store_pa6t_pmc4), + _SYSDEV_ATTR(pmc5, 0600, show_pa6t_pmc5, store_pa6t_pmc5), +}; + static void register_cpu_online(unsigned int cpu) { struct cpu *c = &per_cpu(cpu_devices, cpu); struct sys_device *s = &c->sysdev; + struct sysdev_attribute *attrs, *pmc_attrs; + int i, nattrs; if (!firmware_has_feature(FW_FEATURE_ISERIES) && cpu_has_feature(CPU_FTR_SMT)) sysdev_create_file(s, &attr_smt_snooze_delay); /* PMC stuff */ + switch (cur_cpu_spec->pmc_type) { + case PPC_PMC_IBM: + attrs = ibm_common_attrs; + nattrs = sizeof(ibm_common_attrs) / sizeof(struct sysdev_attribute); + pmc_attrs = ibm_pmc_attrs; + break; + case PPC_PMC_PA6T: + /* PA Semi starts counting at PMC0 */ + attrs = pa6t_attrs; + nattrs = sizeof(pa6t_attrs) / sizeof(struct sysdev_attribute); + pmc_attrs = NULL; + break; + default: + attrs = NULL; + nattrs = 0; + pmc_attrs = NULL; + } + + for (i = 0; i < nattrs; i++) + sysdev_create_file(s, &attrs[i]); - sysdev_create_file(s, &attr_mmcr0); - sysdev_create_file(s, &attr_mmcr1); + if (pmc_attrs) + for (i = 0; i < cur_cpu_spec->num_pmcs; i++) + sysdev_create_file(s, &pmc_attrs[i]); if (cpu_has_feature(CPU_FTR_MMCRA)) sysdev_create_file(s, &attr_mmcra); - if (cur_cpu_spec->num_pmcs >= 1) - sysdev_create_file(s, &attr_pmc1); - if (cur_cpu_spec->num_pmcs >= 2) - sysdev_create_file(s, &attr_pmc2); - if (cur_cpu_spec->num_pmcs >= 3) - sysdev_create_file(s, &attr_pmc3); - if (cur_cpu_spec->num_pmcs >= 4) - sysdev_create_file(s, &attr_pmc4); - if (cur_cpu_spec->num_pmcs >= 5) - sysdev_create_file(s, &attr_pmc5); - if (cur_cpu_spec->num_pmcs >= 6) - sysdev_create_file(s, &attr_pmc6); - if (cur_cpu_spec->num_pmcs >= 7) - sysdev_create_file(s, &attr_pmc7); - if (cur_cpu_spec->num_pmcs >= 8) - sysdev_create_file(s, &attr_pmc8); - if (cpu_has_feature(CPU_FTR_PURR)) sysdev_create_file(s, &attr_purr); @@ -248,6 +285,8 @@ static void unregister_cpu_online(unsigned int cpu) { struct cpu *c = &per_cpu(cpu_devices, cpu); struct sys_device *s = &c->sysdev; + struct sysdev_attribute *attrs, *pmc_attrs; + int i, nattrs; BUG_ON(!c->hotpluggable); @@ -256,30 +295,34 @@ static void unregister_cpu_online(unsigned int cpu) sysdev_remove_file(s, &attr_smt_snooze_delay); /* PMC stuff */ + switch (cur_cpu_spec->pmc_type) { + case PPC_PMC_IBM: + attrs = ibm_common_attrs; + nattrs = sizeof(ibm_common_attrs) / sizeof(struct sysdev_attribute); + pmc_attrs = ibm_pmc_attrs; + break; + case PPC_PMC_PA6T: + /* PA Semi starts counting at PMC0 */ + attrs = pa6t_attrs; + nattrs = sizeof(pa6t_attrs) / sizeof(struct sysdev_attribute); + pmc_attrs = NULL; + break; + default: + attrs = NULL; + nattrs = 0; + pmc_attrs = NULL; + } - sysdev_remove_file(s, &attr_mmcr0); - sysdev_remove_file(s, &attr_mmcr1); + for (i = 0; i < nattrs; i++) + sysdev_remove_file(s, &attrs[i]); + + if (pmc_attrs) + for (i = 0; i < cur_cpu_spec->num_pmcs; i++) + sysdev_remove_file(s, &pmc_attrs[i]); if (cpu_has_feature(CPU_FTR_MMCRA)) sysdev_remove_file(s, &attr_mmcra); - if (cur_cpu_spec->num_pmcs >= 1) - sysdev_remove_file(s, &attr_pmc1); - if (cur_cpu_spec->num_pmcs >= 2) - sysdev_remove_file(s, &attr_pmc2); - if (cur_cpu_spec->num_pmcs >= 3) - sysdev_remove_file(s, &attr_pmc3); - if (cur_cpu_spec->num_pmcs >= 4) - sysdev_remove_file(s, &attr_pmc4); - if (cur_cpu_spec->num_pmcs >= 5) - sysdev_remove_file(s, &attr_pmc5); - if (cur_cpu_spec->num_pmcs >= 6) - sysdev_remove_file(s, &attr_pmc6); - if (cur_cpu_spec->num_pmcs >= 7) - sysdev_remove_file(s, &attr_pmc7); - if (cur_cpu_spec->num_pmcs >= 8) - sysdev_remove_file(s, &attr_pmc8); - if (cpu_has_feature(CPU_FTR_PURR)) sysdev_remove_file(s, &attr_purr); -- cgit v1.2.3 From 7df2457db83bc922fcc8b462526b77f1ffe8c84b Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Sun, 28 Jan 2007 23:33:18 -0600 Subject: [POWERPC] MPIC: support more than 256 sources Allow more than the default 256 MPIC sources. Allocates a new flag (MPIC_LARGE_VECTORS) to be used by platform code when instantiating the mpic. I picked 11 bits worth right now since it would cover the number of sources on any hardware I have seen. It can always be increased later if needed. Signed-off-by: Olof Johansson Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pasemi/setup.c | 5 +-- arch/powerpc/sysdev/mpic.c | 64 +++++++++++++++++++++++------------ 2 files changed, 45 insertions(+), 24 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/pasemi/setup.c b/arch/powerpc/platforms/pasemi/setup.c index bea7d1bb1a3b..0505dd884ae2 100644 --- a/arch/powerpc/platforms/pasemi/setup.c +++ b/arch/powerpc/platforms/pasemi/setup.c @@ -130,8 +130,9 @@ static __init void pas_init_IRQ(void) openpic_addr = of_read_number(opprop, naddr); printk(KERN_DEBUG "OpenPIC addr: %lx\n", openpic_addr); - mpic = mpic_alloc(mpic_node, openpic_addr, MPIC_PRIMARY, 0, 0, - " PAS-OPIC "); + mpic = mpic_alloc(mpic_node, openpic_addr, + MPIC_PRIMARY|MPIC_LARGE_VECTORS, + 0, 0, " PAS-OPIC "); BUG_ON(!mpic); mpic_assign_isu(mpic, 0, openpic_addr + 0x10000); diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 62262f2a4a83..aa701cc27ecc 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -496,13 +496,18 @@ static void __init mpic_scan_ht_pics(struct mpic *mpic) static struct mpic *mpic_find(unsigned int irq, unsigned int *is_ipi) { unsigned int src = mpic_irq_to_hw(irq); + struct mpic *mpic; if (irq < NUM_ISA_INTERRUPTS) return NULL; + + mpic = irq_desc[irq].chip_data; + if (is_ipi) - *is_ipi = (src >= MPIC_VEC_IPI_0 && src <= MPIC_VEC_IPI_3); + *is_ipi = (src >= mpic->ipi_vecs[0] && + src <= mpic->ipi_vecs[3]); - return irq_desc[irq].chip_data; + return mpic; } /* Convert a cpu mask from logical to physical cpu numbers. */ @@ -540,7 +545,11 @@ static inline void mpic_eoi(struct mpic *mpic) #ifdef CONFIG_SMP static irqreturn_t mpic_ipi_action(int irq, void *dev_id) { - smp_message_recv(mpic_irq_to_hw(irq) - MPIC_VEC_IPI_0); + struct mpic *mpic; + + mpic = mpic_find(irq, NULL); + smp_message_recv(mpic_irq_to_hw(irq) - mpic->ipi_vecs[0]); + return IRQ_HANDLED; } #endif /* CONFIG_SMP */ @@ -663,7 +672,7 @@ static void mpic_end_ht_irq(unsigned int irq) static void mpic_unmask_ipi(unsigned int irq) { struct mpic *mpic = mpic_from_ipi(irq); - unsigned int src = mpic_irq_to_hw(irq) - MPIC_VEC_IPI_0; + unsigned int src = mpic_irq_to_hw(irq) - mpic->ipi_vecs[0]; DBG("%s: enable_ipi: %d (ipi %d)\n", mpic->name, irq, src); mpic_ipi_write(src, mpic_ipi_read(src) & ~MPIC_VECPRI_MASK); @@ -807,11 +816,11 @@ static int mpic_host_map(struct irq_host *h, unsigned int virq, DBG("mpic: map virq %d, hwirq 0x%lx\n", virq, hw); - if (hw == MPIC_VEC_SPURRIOUS) + if (hw == mpic->spurious_vec) return -EINVAL; #ifdef CONFIG_SMP - else if (hw >= MPIC_VEC_IPI_0) { + else if (hw >= mpic->ipi_vecs[0]) { WARN_ON(!(mpic->flags & MPIC_PRIMARY)); DBG("mpic: mapping as IPI\n"); @@ -904,6 +913,7 @@ struct mpic * __init mpic_alloc(struct device_node *node, u32 reg; const char *vers; int i; + int intvec_top; u64 paddr = phys_addr; mpic = alloc_bootmem(sizeof(struct mpic)); @@ -914,9 +924,9 @@ struct mpic * __init mpic_alloc(struct device_node *node, mpic->name = name; mpic->of_node = of_node_get(node); - mpic->irqhost = irq_alloc_host(IRQ_HOST_MAP_LINEAR, 256, + mpic->irqhost = irq_alloc_host(IRQ_HOST_MAP_LINEAR, isu_size, &mpic_host_ops, - MPIC_VEC_SPURRIOUS); + flags & MPIC_LARGE_VECTORS ? 2048 : 256); if (mpic->irqhost == NULL) { of_node_put(node); return NULL; @@ -944,6 +954,21 @@ struct mpic * __init mpic_alloc(struct device_node *node, mpic->irq_count = irq_count; mpic->num_sources = 0; /* so far */ + if (flags & MPIC_LARGE_VECTORS) + intvec_top = 2047; + else + intvec_top = 255; + + mpic->timer_vecs[0] = intvec_top - 8; + mpic->timer_vecs[1] = intvec_top - 7; + mpic->timer_vecs[2] = intvec_top - 6; + mpic->timer_vecs[3] = intvec_top - 5; + mpic->ipi_vecs[0] = intvec_top - 4; + mpic->ipi_vecs[1] = intvec_top - 3; + mpic->ipi_vecs[2] = intvec_top - 2; + mpic->ipi_vecs[3] = intvec_top - 1; + mpic->spurious_vec = intvec_top; + /* Check for "big-endian" in device-tree */ if (node && get_property(node, "big-endian", NULL) != NULL) mpic->flags |= MPIC_BIG_ENDIAN; @@ -1084,11 +1109,6 @@ void __init mpic_init(struct mpic *mpic) int i; BUG_ON(mpic->num_sources == 0); - WARN_ON(mpic->num_sources > MPIC_VEC_IPI_0); - - /* Sanitize source count */ - if (mpic->num_sources > MPIC_VEC_IPI_0) - mpic->num_sources = MPIC_VEC_IPI_0; printk(KERN_INFO "mpic: Initializing for %d sources\n", mpic->num_sources); @@ -1104,7 +1124,7 @@ void __init mpic_init(struct mpic *mpic) i * MPIC_INFO(TIMER_STRIDE) + MPIC_INFO(TIMER_VECTOR_PRI), MPIC_VECPRI_MASK | - (MPIC_VEC_TIMER_0 + i)); + (mpic->timer_vecs[0] + i)); } /* Initialize IPIs to our reserved vectors and mark them disabled for now */ @@ -1113,7 +1133,7 @@ void __init mpic_init(struct mpic *mpic) mpic_ipi_write(i, MPIC_VECPRI_MASK | (10 << MPIC_VECPRI_PRIORITY_SHIFT) | - (MPIC_VEC_IPI_0 + i)); + (mpic->ipi_vecs[0] + i)); } /* Initialize interrupt sources */ @@ -1136,8 +1156,8 @@ void __init mpic_init(struct mpic *mpic) 1 << hard_smp_processor_id()); } - /* Init spurrious vector */ - mpic_write(mpic->gregs, MPIC_INFO(GREG_SPURIOUS), MPIC_VEC_SPURRIOUS); + /* Init spurious vector */ + mpic_write(mpic->gregs, MPIC_INFO(GREG_SPURIOUS), mpic->spurious_vec); /* Disable 8259 passthrough, if supported */ if (!(mpic->flags & MPIC_NO_PTHROU_DIS)) @@ -1184,9 +1204,9 @@ void mpic_irq_set_priority(unsigned int irq, unsigned int pri) spin_lock_irqsave(&mpic_lock, flags); if (is_ipi) { - reg = mpic_ipi_read(src - MPIC_VEC_IPI_0) & + reg = mpic_ipi_read(src - mpic->ipi_vecs[0]) & ~MPIC_VECPRI_PRIORITY_MASK; - mpic_ipi_write(src - MPIC_VEC_IPI_0, + mpic_ipi_write(src - mpic->ipi_vecs[0], reg | (pri << MPIC_VECPRI_PRIORITY_SHIFT)); } else { reg = mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI)) @@ -1207,7 +1227,7 @@ unsigned int mpic_irq_get_priority(unsigned int irq) spin_lock_irqsave(&mpic_lock, flags); if (is_ipi) - reg = mpic_ipi_read(src = MPIC_VEC_IPI_0); + reg = mpic_ipi_read(src = mpic->ipi_vecs[0]); else reg = mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI)); spin_unlock_irqrestore(&mpic_lock, flags); @@ -1313,7 +1333,7 @@ unsigned int mpic_get_one_irq(struct mpic *mpic) #ifdef DEBUG_LOW DBG("%s: get_one_irq(): %d\n", mpic->name, src); #endif - if (unlikely(src == MPIC_VEC_SPURRIOUS)) + if (unlikely(src == mpic->spurious_vec)) return NO_IRQ; return irq_linear_revmap(mpic->irqhost, src); } @@ -1345,7 +1365,7 @@ void mpic_request_ipis(void) for (i = 0; i < 4; i++) { unsigned int vipi = irq_create_mapping(mpic->irqhost, - MPIC_VEC_IPI_0 + i); + mpic->ipi_vecs[0] + i); if (vipi == NO_IRQ) { printk(KERN_ERR "Failed to map IPI %d\n", i); break; -- cgit v1.2.3 From 63c2f782e8f6aafbc11b14b2cb291b3dc9fc217d Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Tue, 30 Jan 2007 06:06:00 -0500 Subject: [POWERPC] Add "is_power_of_2" checking to log2.h. Add the inline function "is_power_of_2()" to log2.h, where the value zero is *not* considered to be a power of two. Signed-off-by: Robert P. J. Day Acked-by: Kumar Gala Signed-off-by: Paul Mackerras --- arch/powerpc/mm/pgtable_32.c | 5 +---- arch/ppc/mm/pgtable.c | 5 +---- arch/ppc/syslib/ppc85xx_rio.c | 2 -- 3 files changed, 2 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c index 1891dbeeb8e9..bd02272bcb0f 100644 --- a/arch/powerpc/mm/pgtable_32.c +++ b/arch/powerpc/mm/pgtable_32.c @@ -294,11 +294,8 @@ void __init mapin_ram(void) } } -/* is x a power of 2? */ -#define is_power_of_2(x) ((x) != 0 && (((x) & ((x) - 1)) == 0)) - /* is x a power of 4? */ -#define is_power_of_4(x) ((x) != 0 && (((x) & (x-1)) == 0) && (ffs(x) & 1)) +#define is_power_of_4(x) is_power_of_2(x) && (ffs(x) & 1)) /* * Set up a mapping for a block of I/O. diff --git a/arch/ppc/mm/pgtable.c b/arch/ppc/mm/pgtable.c index 354a9408f024..82b06a1ef95d 100644 --- a/arch/ppc/mm/pgtable.c +++ b/arch/ppc/mm/pgtable.c @@ -313,11 +313,8 @@ void __init mapin_ram(void) } } -/* is x a power of 2? */ -#define is_power_of_2(x) ((x) != 0 && (((x) & ((x) - 1)) == 0)) - /* is x a power of 4? */ -#define is_power_of_4(x) ((x) != 0 && (((x) & (x-1)) == 0) && (ffs(x) & 1)) +#define is_power_of_4(x) is_power_of_2(x) && (ffs(x) & 1)) /* * Set up a mapping for a block of I/O. diff --git a/arch/ppc/syslib/ppc85xx_rio.c b/arch/ppc/syslib/ppc85xx_rio.c index 05b0e9415085..2b097800cdd9 100644 --- a/arch/ppc/syslib/ppc85xx_rio.c +++ b/arch/ppc/syslib/ppc85xx_rio.c @@ -59,8 +59,6 @@ #define DBELL_TID(x) (*(u8 *)(x + DOORBELL_TID_OFFSET)) #define DBELL_INF(x) (*(u16 *)(x + DOORBELL_INFO_OFFSET)) -#define is_power_of_2(x) (((x) & ((x) - 1)) == 0) - struct rio_atmu_regs { u32 rowtar; u32 pad1; -- cgit v1.2.3 From 2a08ea69a3e448a5cc94e5da9eccc40cf13f9532 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Tue, 30 Jan 2007 15:20:27 -0800 Subject: [POWERPC] PS3: Move system bus to platform directory Move the PS3 system bus routines from drivers/ps3 to arch/powerpc/platforms/ps3. Signed-off-by: Geoff Levand Acked-by: Benjamin Herrenschmidt Acked-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/ps3/Makefile | 1 + arch/powerpc/platforms/ps3/htab.c | 1 - arch/powerpc/platforms/ps3/interrupt.c | 1 - arch/powerpc/platforms/ps3/mm.c | 1 - arch/powerpc/platforms/ps3/os-area.c | 1 - arch/powerpc/platforms/ps3/platform.h | 151 +++++++++++++ arch/powerpc/platforms/ps3/repository.c | 3 +- arch/powerpc/platforms/ps3/setup.c | 1 - arch/powerpc/platforms/ps3/smp.c | 1 - arch/powerpc/platforms/ps3/spu.c | 3 +- arch/powerpc/platforms/ps3/system-bus.c | 363 ++++++++++++++++++++++++++++++++ 11 files changed, 519 insertions(+), 8 deletions(-) create mode 100644 arch/powerpc/platforms/ps3/system-bus.c (limited to 'arch') diff --git a/arch/powerpc/platforms/ps3/Makefile b/arch/powerpc/platforms/ps3/Makefile index 1994904f580f..a0048fcf0866 100644 --- a/arch/powerpc/platforms/ps3/Makefile +++ b/arch/powerpc/platforms/ps3/Makefile @@ -1,5 +1,6 @@ obj-y += setup.o mm.o time.o hvcall.o htab.o repository.o obj-y += interrupt.o exports.o os-area.o +obj-y += system-bus.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_SPU_BASE) += spu.o diff --git a/arch/powerpc/platforms/ps3/htab.c b/arch/powerpc/platforms/ps3/htab.c index 8fe1769655a3..a4b5a1bc60f4 100644 --- a/arch/powerpc/platforms/ps3/htab.c +++ b/arch/powerpc/platforms/ps3/htab.c @@ -23,7 +23,6 @@ #include #include #include -#include #include #include "platform.h" diff --git a/arch/powerpc/platforms/ps3/interrupt.c b/arch/powerpc/platforms/ps3/interrupt.c index 95b128ba9087..bb17283275aa 100644 --- a/arch/powerpc/platforms/ps3/interrupt.c +++ b/arch/powerpc/platforms/ps3/interrupt.c @@ -24,7 +24,6 @@ #include #include -#include #include #include "platform.h" diff --git a/arch/powerpc/platforms/ps3/mm.c b/arch/powerpc/platforms/ps3/mm.c index 49c0d010d491..42354de3f557 100644 --- a/arch/powerpc/platforms/ps3/mm.c +++ b/arch/powerpc/platforms/ps3/mm.c @@ -25,7 +25,6 @@ #include #include #include -#include #include #include "platform.h" diff --git a/arch/powerpc/platforms/ps3/os-area.c b/arch/powerpc/platforms/ps3/os-area.c index 6d0d2ac39bd8..5c3da08bc0c4 100644 --- a/arch/powerpc/platforms/ps3/os-area.c +++ b/arch/powerpc/platforms/ps3/os-area.c @@ -22,7 +22,6 @@ #include #include -#include #include "platform.h" diff --git a/arch/powerpc/platforms/ps3/platform.h b/arch/powerpc/platforms/ps3/platform.h index 23b111bea9d0..ca04f03305c7 100644 --- a/arch/powerpc/platforms/ps3/platform.h +++ b/arch/powerpc/platforms/ps3/platform.h @@ -22,6 +22,9 @@ #define _PS3_PLATFORM_H #include +#include + +#include /* htab */ @@ -65,4 +68,152 @@ void ps3_spu_set_platform (void); static inline void ps3_spu_set_platform (void) {} #endif +/* repository bus info */ + +enum ps3_bus_type { + PS3_BUS_TYPE_SB = 4, + PS3_BUS_TYPE_STORAGE = 5, +}; + +enum ps3_dev_type { + PS3_DEV_TYPE_STOR_DISK = TYPE_DISK, /* 0 */ + PS3_DEV_TYPE_SB_GELIC = 3, + PS3_DEV_TYPE_SB_USB = 4, + PS3_DEV_TYPE_STOR_ROM = TYPE_ROM, /* 5 */ + PS3_DEV_TYPE_SB_GPIO = 6, + PS3_DEV_TYPE_STOR_FLASH = TYPE_RBC, /* 14 */ +}; + +int ps3_repository_read_bus_str(unsigned int bus_index, const char *bus_str, + u64 *value); +int ps3_repository_read_bus_id(unsigned int bus_index, unsigned int *bus_id); +int ps3_repository_read_bus_type(unsigned int bus_index, + enum ps3_bus_type *bus_type); +int ps3_repository_read_bus_num_dev(unsigned int bus_index, + unsigned int *num_dev); + +/* repository bus device info */ + +enum ps3_interrupt_type { + PS3_INTERRUPT_TYPE_EVENT_PORT = 2, + PS3_INTERRUPT_TYPE_SB_OHCI = 3, + PS3_INTERRUPT_TYPE_SB_EHCI = 4, + PS3_INTERRUPT_TYPE_OTHER = 5, +}; + +enum ps3_reg_type { + PS3_REG_TYPE_SB_OHCI = 3, + PS3_REG_TYPE_SB_EHCI = 4, + PS3_REG_TYPE_SB_GPIO = 5, +}; + +int ps3_repository_read_dev_str(unsigned int bus_index, + unsigned int dev_index, const char *dev_str, u64 *value); +int ps3_repository_read_dev_id(unsigned int bus_index, unsigned int dev_index, + unsigned int *dev_id); +int ps3_repository_read_dev_type(unsigned int bus_index, + unsigned int dev_index, enum ps3_dev_type *dev_type); +int ps3_repository_read_dev_intr(unsigned int bus_index, + unsigned int dev_index, unsigned int intr_index, + enum ps3_interrupt_type *intr_type, unsigned int *interrupt_id); +int ps3_repository_read_dev_reg_type(unsigned int bus_index, + unsigned int dev_index, unsigned int reg_index, + enum ps3_reg_type *reg_type); +int ps3_repository_read_dev_reg_addr(unsigned int bus_index, + unsigned int dev_index, unsigned int reg_index, u64 *bus_addr, + u64 *len); +int ps3_repository_read_dev_reg(unsigned int bus_index, + unsigned int dev_index, unsigned int reg_index, + enum ps3_reg_type *reg_type, u64 *bus_addr, u64 *len); + +/* repository bus enumerators */ + +struct ps3_repository_device { + unsigned int bus_index; + unsigned int dev_index; + struct ps3_device_id did; +}; + +int ps3_repository_find_device(enum ps3_bus_type bus_type, + enum ps3_dev_type dev_type, + const struct ps3_repository_device *start_dev, + struct ps3_repository_device *dev); +static inline int ps3_repository_find_first_device( + enum ps3_bus_type bus_type, enum ps3_dev_type dev_type, + struct ps3_repository_device *dev) +{ + return ps3_repository_find_device(bus_type, dev_type, NULL, dev); +} +int ps3_repository_find_interrupt(const struct ps3_repository_device *dev, + enum ps3_interrupt_type intr_type, unsigned int *interrupt_id); +int ps3_repository_find_reg(const struct ps3_repository_device *dev, + enum ps3_reg_type reg_type, u64 *bus_addr, u64 *len); + +/* repository block device info */ + +int ps3_repository_read_stor_dev_port(unsigned int bus_index, + unsigned int dev_index, u64 *port); +int ps3_repository_read_stor_dev_blk_size(unsigned int bus_index, + unsigned int dev_index, u64 *blk_size); +int ps3_repository_read_stor_dev_num_blocks(unsigned int bus_index, + unsigned int dev_index, u64 *num_blocks); +int ps3_repository_read_stor_dev_num_regions(unsigned int bus_index, + unsigned int dev_index, unsigned int *num_regions); +int ps3_repository_read_stor_dev_region_id(unsigned int bus_index, + unsigned int dev_index, unsigned int region_index, + unsigned int *region_id); +int ps3_repository_read_stor_dev_region_size(unsigned int bus_index, + unsigned int dev_index, unsigned int region_index, u64 *region_size); +int ps3_repository_read_stor_dev_region_start(unsigned int bus_index, + unsigned int dev_index, unsigned int region_index, u64 *region_start); +int ps3_repository_read_stor_dev_info(unsigned int bus_index, + unsigned int dev_index, u64 *port, u64 *blk_size, + u64 *num_blocks, unsigned int *num_regions); +int ps3_repository_read_stor_dev_region(unsigned int bus_index, + unsigned int dev_index, unsigned int region_index, + unsigned int *region_id, u64 *region_start, u64 *region_size); + +/* repository pu and memory info */ + +int ps3_repository_read_num_pu(unsigned int *num_pu); +int ps3_repository_read_ppe_id(unsigned int *pu_index, unsigned int *ppe_id); +int ps3_repository_read_rm_base(unsigned int ppe_id, u64 *rm_base); +int ps3_repository_read_rm_size(unsigned int ppe_id, u64 *rm_size); +int ps3_repository_read_region_total(u64 *region_total); +int ps3_repository_read_mm_info(u64 *rm_base, u64 *rm_size, + u64 *region_total); + +/* repository pme info */ + +int ps3_repository_read_num_be(unsigned int *num_be); +int ps3_repository_read_be_node_id(unsigned int be_index, u64 *node_id); +int ps3_repository_read_tb_freq(u64 node_id, u64 *tb_freq); +int ps3_repository_read_be_tb_freq(unsigned int be_index, u64 *tb_freq); + +/* repository 'Other OS' area */ + +int ps3_repository_read_boot_dat_addr(u64 *lpar_addr); +int ps3_repository_read_boot_dat_size(unsigned int *size); +int ps3_repository_read_boot_dat_info(u64 *lpar_addr, unsigned int *size); + +/* repository spu info */ + +/** + * enum spu_resource_type - Type of spu resource. + * @spu_resource_type_shared: Logical spu is shared with other partions. + * @spu_resource_type_exclusive: Logical spu is not shared with other partions. + * + * Returned by ps3_repository_read_spu_resource_id(). + */ + +enum ps3_spu_resource_type { + PS3_SPU_RESOURCE_TYPE_SHARED = 0, + PS3_SPU_RESOURCE_TYPE_EXCLUSIVE = 0x8000000000000000UL, +}; + +int ps3_repository_read_num_spu_reserved(unsigned int *num_spu_reserved); +int ps3_repository_read_num_spu_resource_id(unsigned int *num_resource_id); +int ps3_repository_read_spu_resource_id(unsigned int res_index, + enum ps3_spu_resource_type* resource_type, unsigned int *resource_id); + #endif diff --git a/arch/powerpc/platforms/ps3/repository.c b/arch/powerpc/platforms/ps3/repository.c index 2416bfadec9e..ae586a0e5d3f 100644 --- a/arch/powerpc/platforms/ps3/repository.c +++ b/arch/powerpc/platforms/ps3/repository.c @@ -18,9 +18,10 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#include #include +#include "platform.h" + enum ps3_vendor_id { PS3_VENDOR_ID_NONE = 0, PS3_VENDOR_ID_SONY = 0x8000000000000000UL, diff --git a/arch/powerpc/platforms/ps3/setup.c b/arch/powerpc/platforms/ps3/setup.c index cb91a81352bf..e62505e18813 100644 --- a/arch/powerpc/platforms/ps3/setup.c +++ b/arch/powerpc/platforms/ps3/setup.c @@ -32,7 +32,6 @@ #include #include #include -#include #include "platform.h" diff --git a/arch/powerpc/platforms/ps3/smp.c b/arch/powerpc/platforms/ps3/smp.c index bde71b0572bd..6fb887961a6d 100644 --- a/arch/powerpc/platforms/ps3/smp.c +++ b/arch/powerpc/platforms/ps3/smp.c @@ -23,7 +23,6 @@ #include #include -#include #include "platform.h" diff --git a/arch/powerpc/platforms/ps3/spu.c b/arch/powerpc/platforms/ps3/spu.c index 9f6edc58568d..d1929721b0e4 100644 --- a/arch/powerpc/platforms/ps3/spu.c +++ b/arch/powerpc/platforms/ps3/spu.c @@ -26,9 +26,10 @@ #include #include -#include #include +#include "platform.h" + /* spu_management_ops */ /** diff --git a/arch/powerpc/platforms/ps3/system-bus.c b/arch/powerpc/platforms/ps3/system-bus.c new file mode 100644 index 000000000000..9f2c6a909e4d --- /dev/null +++ b/arch/powerpc/platforms/ps3/system-bus.c @@ -0,0 +1,363 @@ +/* + * PS3 system bus driver. + * + * Copyright (C) 2006 Sony Computer Entertainment Inc. + * Copyright 2006 Sony Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "platform.h" + +#define dump_mmio_region(_a) _dump_mmio_region(_a, __func__, __LINE__) +static void _dump_mmio_region(const struct ps3_mmio_region* r, + const char* func, int line) +{ + pr_debug("%s:%d: dev %u:%u\n", func, line, r->did.bus_id, + r->did.dev_id); + pr_debug("%s:%d: bus_addr %lxh\n", func, line, r->bus_addr); + pr_debug("%s:%d: len %lxh\n", func, line, r->len); + pr_debug("%s:%d: lpar_addr %lxh\n", func, line, r->lpar_addr); +} + +int ps3_mmio_region_create(struct ps3_mmio_region *r) +{ + int result; + + result = lv1_map_device_mmio_region(r->did.bus_id, r->did.dev_id, + r->bus_addr, r->len, r->page_size, &r->lpar_addr); + + if (result) { + pr_debug("%s:%d: lv1_map_device_mmio_region failed: %s\n", + __func__, __LINE__, ps3_result(result)); + r->lpar_addr = 0; + } + + dump_mmio_region(r); + return result; +} + +int ps3_free_mmio_region(struct ps3_mmio_region *r) +{ + int result; + + result = lv1_unmap_device_mmio_region(r->did.bus_id, r->did.dev_id, + r->lpar_addr); + + if (result) + pr_debug("%s:%d: lv1_unmap_device_mmio_region failed: %s\n", + __func__, __LINE__, ps3_result(result)); + + r->lpar_addr = 0; + return result; +} + +static int ps3_system_bus_match(struct device *_dev, + struct device_driver *_drv) +{ + int result; + struct ps3_system_bus_driver *drv = to_ps3_system_bus_driver(_drv); + struct ps3_system_bus_device *dev = to_ps3_system_bus_device(_dev); + + result = dev->match_id == drv->match_id; + + pr_info("%s:%d: dev=%u(%s), drv=%u(%s): %s\n", __func__, __LINE__, + dev->match_id, dev->core.bus_id, drv->match_id, drv->core.name, + (result ? "match" : "miss")); + return result; +} + +static int ps3_system_bus_probe(struct device *_dev) +{ + int result; + struct ps3_system_bus_device *dev = to_ps3_system_bus_device(_dev); + struct ps3_system_bus_driver *drv = + to_ps3_system_bus_driver(_dev->driver); + + result = lv1_open_device(dev->did.bus_id, dev->did.dev_id, 0); + + if (result) { + pr_debug("%s:%d: lv1_open_device failed (%d)\n", + __func__, __LINE__, result); + result = -EACCES; + goto clean_none; + } + + if (dev->d_region->did.bus_id) { + result = ps3_dma_region_create(dev->d_region); + + if (result) { + pr_debug("%s:%d: ps3_dma_region_create failed (%d)\n", + __func__, __LINE__, result); + BUG_ON("check region type"); + result = -EINVAL; + goto clean_device; + } + } + + BUG_ON(!drv); + + if (drv->probe) + result = drv->probe(dev); + else + pr_info("%s:%d: %s no probe method\n", __func__, __LINE__, + dev->core.bus_id); + + if (result) { + pr_debug("%s:%d: drv->probe failed\n", __func__, __LINE__); + goto clean_dma; + } + + return result; + +clean_dma: + ps3_dma_region_free(dev->d_region); +clean_device: + lv1_close_device(dev->did.bus_id, dev->did.dev_id); +clean_none: + return result; +} + +static int ps3_system_bus_remove(struct device *_dev) +{ + struct ps3_system_bus_device *dev = to_ps3_system_bus_device(_dev); + struct ps3_system_bus_driver *drv = + to_ps3_system_bus_driver(_dev->driver); + + if (drv->remove) + drv->remove(dev); + else + pr_info("%s:%d: %s no remove method\n", __func__, __LINE__, + dev->core.bus_id); + + ps3_dma_region_free(dev->d_region); + ps3_free_mmio_region(dev->m_region); + lv1_close_device(dev->did.bus_id, dev->did.dev_id); + + return 0; +} + +struct bus_type ps3_system_bus_type = { + .name = "ps3_system_bus", + .match = ps3_system_bus_match, + .probe = ps3_system_bus_probe, + .remove = ps3_system_bus_remove, +}; + +int __init ps3_system_bus_init(void) +{ + int result; + + if (!firmware_has_feature(FW_FEATURE_PS3_LV1)) + return 0; + + result = bus_register(&ps3_system_bus_type); + BUG_ON(result); + return result; +} + +core_initcall(ps3_system_bus_init); + +/* Allocates a contiguous real buffer and creates mappings over it. + * Returns the virtual address of the buffer and sets dma_handle + * to the dma address (mapping) of the first page. + */ + +static void * ps3_alloc_coherent(struct device *_dev, size_t size, + dma_addr_t *dma_handle, gfp_t flag) +{ + int result; + struct ps3_system_bus_device *dev = to_ps3_system_bus_device(_dev); + unsigned long virt_addr; + + BUG_ON(!dev->d_region->bus_addr); + + flag &= ~(__GFP_DMA | __GFP_HIGHMEM); + flag |= __GFP_ZERO; + + virt_addr = __get_free_pages(flag, get_order(size)); + + if (!virt_addr) { + pr_debug("%s:%d: get_free_pages failed\n", __func__, __LINE__); + goto clean_none; + } + + result = ps3_dma_map(dev->d_region, virt_addr, size, dma_handle); + + if (result) { + pr_debug("%s:%d: ps3_dma_map failed (%d)\n", + __func__, __LINE__, result); + BUG_ON("check region type"); + goto clean_alloc; + } + + return (void*)virt_addr; + +clean_alloc: + free_pages(virt_addr, get_order(size)); +clean_none: + dma_handle = NULL; + return NULL; +} + +static void ps3_free_coherent(struct device *_dev, size_t size, void *vaddr, + dma_addr_t dma_handle) +{ + struct ps3_system_bus_device *dev = to_ps3_system_bus_device(_dev); + + ps3_dma_unmap(dev->d_region, dma_handle, size); + free_pages((unsigned long)vaddr, get_order(size)); +} + +/* Creates TCEs for a user provided buffer. The user buffer must be + * contiguous real kernel storage (not vmalloc). The address of the buffer + * passed here is the kernel (virtual) address of the buffer. The buffer + * need not be page aligned, the dma_addr_t returned will point to the same + * byte within the page as vaddr. + */ + +static dma_addr_t ps3_map_single(struct device *_dev, void *ptr, size_t size, + enum dma_data_direction direction) +{ + struct ps3_system_bus_device *dev = to_ps3_system_bus_device(_dev); + int result; + unsigned long bus_addr; + + result = ps3_dma_map(dev->d_region, (unsigned long)ptr, size, + &bus_addr); + + if (result) { + pr_debug("%s:%d: ps3_dma_map failed (%d)\n", + __func__, __LINE__, result); + } + + return bus_addr; +} + +static void ps3_unmap_single(struct device *_dev, dma_addr_t dma_addr, + size_t size, enum dma_data_direction direction) +{ + struct ps3_system_bus_device *dev = to_ps3_system_bus_device(_dev); + int result; + + result = ps3_dma_unmap(dev->d_region, dma_addr, size); + + if (result) { + pr_debug("%s:%d: ps3_dma_unmap failed (%d)\n", + __func__, __LINE__, result); + } +} + +static int ps3_map_sg(struct device *_dev, struct scatterlist *sg, int nents, + enum dma_data_direction direction) +{ +#if defined(CONFIG_PS3_DYNAMIC_DMA) + BUG_ON("do"); +#endif + return 0; +} + +static void ps3_unmap_sg(struct device *_dev, struct scatterlist *sg, + int nents, enum dma_data_direction direction) +{ +#if defined(CONFIG_PS3_DYNAMIC_DMA) + BUG_ON("do"); +#endif +} + +static int ps3_dma_supported(struct device *_dev, u64 mask) +{ + return 1; +} + +static struct dma_mapping_ops ps3_dma_ops = { + .alloc_coherent = ps3_alloc_coherent, + .free_coherent = ps3_free_coherent, + .map_single = ps3_map_single, + .unmap_single = ps3_unmap_single, + .map_sg = ps3_map_sg, + .unmap_sg = ps3_unmap_sg, + .dma_supported = ps3_dma_supported +}; + +/** + * ps3_system_bus_release_device - remove a device from the system bus + */ + +static void ps3_system_bus_release_device(struct device *_dev) +{ + struct ps3_system_bus_device *dev = to_ps3_system_bus_device(_dev); + kfree(dev); +} + +/** + * ps3_system_bus_device_register - add a device to the system bus + * + * ps3_system_bus_device_register() expects the dev object to be allocated + * dynamically by the caller. The system bus takes ownership of the dev + * object and frees the object in ps3_system_bus_release_device(). + */ + +int ps3_system_bus_device_register(struct ps3_system_bus_device *dev) +{ + int result; + static unsigned int dev_count = 1; + + dev->core.parent = NULL; + dev->core.bus = &ps3_system_bus_type; + dev->core.release = ps3_system_bus_release_device; + + dev->core.archdata.of_node = NULL; + dev->core.archdata.dma_ops = &ps3_dma_ops; + dev->core.archdata.numa_node = 0; + + snprintf(dev->core.bus_id, sizeof(dev->core.bus_id), "sb_%02x", + dev_count++); + + pr_debug("%s:%d add %s\n", __func__, __LINE__, dev->core.bus_id); + + result = device_register(&dev->core); + return result; +} + +EXPORT_SYMBOL_GPL(ps3_system_bus_device_register); + +int ps3_system_bus_driver_register(struct ps3_system_bus_driver *drv) +{ + int result; + + drv->core.bus = &ps3_system_bus_type; + + result = driver_register(&drv->core); + return result; +} + +EXPORT_SYMBOL_GPL(ps3_system_bus_driver_register); + +void ps3_system_bus_driver_unregister(struct ps3_system_bus_driver *drv) +{ + driver_unregister(&drv->core); +} + +EXPORT_SYMBOL_GPL(ps3_system_bus_driver_unregister); -- cgit v1.2.3 From 35063bb2eaf85bd0f6e3acefae2d95cb0120eb3e Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Tue, 30 Jan 2007 15:20:34 -0800 Subject: [POWERPC] PS3: Fix DMA scatter-gather Add the missing pieces to support DMA scatter-gather on the PS3 system bus. Signed-off-by: Geoff Levand Acked-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/ps3/system-bus.c | 23 +++++++++++++++++++++-- 1 file changed, 21 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/ps3/system-bus.c b/arch/powerpc/platforms/ps3/system-bus.c index 9f2c6a909e4d..bce6136cbce7 100644 --- a/arch/powerpc/platforms/ps3/system-bus.c +++ b/arch/powerpc/platforms/ps3/system-bus.c @@ -272,10 +272,29 @@ static void ps3_unmap_single(struct device *_dev, dma_addr_t dma_addr, static int ps3_map_sg(struct device *_dev, struct scatterlist *sg, int nents, enum dma_data_direction direction) { + struct ps3_system_bus_device *dev = to_ps3_system_bus_device(_dev); + int i; + #if defined(CONFIG_PS3_DYNAMIC_DMA) BUG_ON("do"); + return -EPERM; +#else + for (i = 0; i < nents; i++, sg++) { + int result = ps3_dma_map(dev->d_region, + page_to_phys(sg->page) + sg->offset, sg->length, + &sg->dma_address); + + if (result) { + pr_debug("%s:%d: ps3_dma_map failed (%d)\n", + __func__, __LINE__, result); + return -EINVAL; + } + + sg->dma_length = sg->length; + } + + return nents; #endif - return 0; } static void ps3_unmap_sg(struct device *_dev, struct scatterlist *sg, @@ -288,7 +307,7 @@ static void ps3_unmap_sg(struct device *_dev, struct scatterlist *sg, static int ps3_dma_supported(struct device *_dev, u64 mask) { - return 1; + return mask >= DMA_32BIT_MASK; } static struct dma_mapping_ops ps3_dma_ops = { -- cgit v1.2.3 From c19cdcb1b8d33a20d372191eced2def7f901806b Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Tue, 30 Jan 2007 15:20:37 -0800 Subject: [POWERPC] PS3: Enable USB mass storage Update ps3_defconfig to enable USB mass storage and VFAT. Signed-off-by: Geoff Levand Acked-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/configs/ps3_defconfig | 21 +++++++++++++++++---- 1 file changed, 17 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig index 4d04ab26ce30..ec644b34a082 100644 --- a/arch/powerpc/configs/ps3_defconfig +++ b/arch/powerpc/configs/ps3_defconfig @@ -677,7 +677,17 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # may also be needed; see USB_STORAGE Help for more information # -# CONFIG_USB_STORAGE is not set +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_LIBUSUAL is not set # @@ -852,8 +862,11 @@ CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems # +CONFIG_FAT_FS=y # CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # @@ -921,7 +934,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set +CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set @@ -945,7 +958,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set # CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set +CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set -- cgit v1.2.3 From 73844ecbaa58885c5e89af7d1b08faaffffa6833 Mon Sep 17 00:00:00 2001 From: Vitaly Bordug Date: Wed, 31 Jan 2007 02:08:54 +0300 Subject: [POWERPC] cpm2: CPM2 interrupt controller fix This contains important fixes for the CPM2 PIC code. Eliminated CPM_IRQ_OFFSET, pulling the respective interrupt numbers from the interrupt mapping. Updated devicetree files to reflect that. Changed direct IC-related IO accesses to the IO accessors. Fixed all the sense values to keep coherency with ipic. In the current code, CPM2 stuff will have no IRQs and hence could be hardly usable. Signed-off-by: Vitaly Bordug Signed-off-by: Paul Mackerras --- arch/powerpc/boot/dts/mpc8272ads.dts | 47 ++++++----- arch/powerpc/boot/dts/mpc8560ads.dts | 10 +-- arch/powerpc/sysdev/cpm2_pic.c | 150 +++++++++++++++++++++-------------- arch/powerpc/sysdev/cpm2_pic.h | 2 - 4 files changed, 121 insertions(+), 88 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/boot/dts/mpc8272ads.dts b/arch/powerpc/boot/dts/mpc8272ads.dts index 34efdd028c4f..286638e8af6e 100644 --- a/arch/powerpc/boot/dts/mpc8272ads.dts +++ b/arch/powerpc/boot/dts/mpc8272ads.dts @@ -53,6 +53,13 @@ reg = <00000000 4000000 f4500000 00000020>; }; + chosen { + name = "chosen"; + linux,platform = <0>; + interrupt-controller = <10c00>; + linux,phandle = <400>; + }; + soc8272@f0000000 { #address-cells = <1>; #size-cells = <1>; @@ -71,7 +78,7 @@ ethernet-phy@0 { linux,phandle = <2452000>; interrupt-parent = <10c00>; - interrupts = <19 1>; + interrupts = <17 4>; reg = <0>; bitbang = [ 12 12 13 02 02 01 ]; device_type = "ethernet-phy"; @@ -79,7 +86,7 @@ ethernet-phy@1 { linux,phandle = <2452001>; interrupt-parent = <10c00>; - interrupts = <19 1>; + interrupts = <17 4>; bitbang = [ 12 12 13 02 02 01 ]; reg = <3>; device_type = "ethernet-phy"; @@ -90,7 +97,7 @@ #address-cells = <1>; #size-cells = <0>; device_type = "network"; - device-id = <2>; + device-id = <1>; compatible = "fs_enet"; model = "FCC"; reg = <11300 20 8400 100 11380 30>; @@ -104,7 +111,7 @@ ethernet@25000 { device_type = "network"; - device-id = <3>; + device-id = <2>; compatible = "fs_enet"; model = "FCC"; reg = <11320 20 8500 100 113b0 30>; @@ -133,7 +140,7 @@ device_type = "serial"; compatible = "cpm_uart"; model = "SCC"; - device-id = <2>; + device-id = <1>; reg = <11a00 20 8000 100>; current-speed = <1c200>; interrupts = <28 2>; @@ -147,7 +154,7 @@ device_type = "serial"; compatible = "cpm_uart"; model = "SCC"; - device-id = <5>; + device-id = <4>; reg = <11a60 20 8300 100>; current-speed = <1c200>; interrupts = <2b 2>; @@ -181,24 +188,24 @@ interrupt-map = < /* IDSEL 0x16 */ - b000 0 0 1 f8200000 40 0 - b000 0 0 2 f8200000 41 0 - b000 0 0 3 f8200000 42 0 - b000 0 0 4 f8200000 43 0 + b000 0 0 1 f8200000 40 8 + b000 0 0 2 f8200000 41 8 + b000 0 0 3 f8200000 42 8 + b000 0 0 4 f8200000 43 8 /* IDSEL 0x17 */ - b800 0 0 1 f8200000 43 0 - b800 0 0 2 f8200000 40 0 - b800 0 0 3 f8200000 41 0 - b800 0 0 4 f8200000 42 0 + b800 0 0 1 f8200000 43 8 + b800 0 0 2 f8200000 40 8 + b800 0 0 3 f8200000 41 8 + b800 0 0 4 f8200000 42 8 /* IDSEL 0x18 */ - c000 0 0 1 f8200000 42 0 - c000 0 0 2 f8200000 43 0 - c000 0 0 3 f8200000 40 0 - c000 0 0 4 f8200000 41 0>; + c000 0 0 1 f8200000 42 8 + c000 0 0 2 f8200000 43 8 + c000 0 0 3 f8200000 40 8 + c000 0 0 4 f8200000 41 8>; interrupt-parent = <10c00>; - interrupts = <14 3>; + interrupts = <14 8>; bus-range = <0 0>; ranges = <02000000 0 80000000 80000000 0 40000000 01000000 0 00000000 f6000000 0 02000000>; @@ -210,7 +217,7 @@ model = "SEC2"; compatible = "talitos"; reg = <30000 10000>; - interrupts = ; + interrupts = ; interrupt-parent = <10c00>; num-channels = <4>; channel-fifo-len = <18>; diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts index 2b168486aeba..119bd5d3a834 100644 --- a/arch/powerpc/boot/dts/mpc8560ads.dts +++ b/arch/powerpc/boot/dts/mpc8560ads.dts @@ -200,7 +200,7 @@ a800 0 0 4 40000 31 1>; interrupt-parent = <40000>; - interrupts = <42 0>; + interrupts = <8 0>; bus-range = <0 0>; ranges = <02000000 0 80000000 80000000 0 20000000 01000000 0 00000000 e2000000 0 01000000>; @@ -250,7 +250,7 @@ rx-clock = <1>; tx-clock = <1>; current-speed = <1c200>; - interrupts = <64 1>; + interrupts = <28 8>; interrupt-parent = <90c00>; }; @@ -264,7 +264,7 @@ rx-clock = <2>; tx-clock = <2>; current-speed = <1c200>; - interrupts = <65 1>; + interrupts = <29 8>; interrupt-parent = <90c00>; }; @@ -278,7 +278,7 @@ clock-setup = ; rx-clock = <15>; tx-clock = <16>; - interrupts = <5d 1>; + interrupts = <21 8>; interrupt-parent = <90c00>; phy-handle = <2452002>; }; @@ -293,7 +293,7 @@ clock-setup = ; rx-clock = <17>; tx-clock = <18>; - interrupts = <5e 1>; + interrupts = <22 8>; interrupt-parent = <90c00>; phy-handle = <2452003>; }; diff --git a/arch/powerpc/sysdev/cpm2_pic.c b/arch/powerpc/sysdev/cpm2_pic.c index e2739eb93cdf..eabfe06fe05c 100644 --- a/arch/powerpc/sysdev/cpm2_pic.c +++ b/arch/powerpc/sysdev/cpm2_pic.c @@ -36,9 +36,20 @@ #include #include #include +#include #include "cpm2_pic.h" +/* External IRQS */ +#define CPM2_IRQ_EXT1 19 +#define CPM2_IRQ_EXT7 25 + +/* Port C IRQS */ +#define CPM2_IRQ_PORTC15 48 +#define CPM2_IRQ_PORTC0 63 + +static intctl_cpm2_t *cpm2_intctl; + static struct device_node *cpm2_pic_node; static struct irq_host *cpm2_pic_host; #define NR_MASK_WORDS ((NR_IRQS + 31) / 32) @@ -68,68 +79,55 @@ static const u_char irq_to_siubit[] = { 24, 25, 26, 27, 28, 29, 30, 31, }; -static void cpm2_mask_irq(unsigned int irq_nr) +static void cpm2_mask_irq(unsigned int virq) { int bit, word; - volatile uint *simr; - - irq_nr -= CPM_IRQ_OFFSET; + unsigned int irq_nr = virq_to_hw(virq); bit = irq_to_siubit[irq_nr]; word = irq_to_siureg[irq_nr]; - simr = &(cpm2_intctl->ic_simrh); ppc_cached_irq_mask[word] &= ~(1 << bit); - simr[word] = ppc_cached_irq_mask[word]; + out_be32(&cpm2_intctl->ic_simrh + word, ppc_cached_irq_mask[word]); } -static void cpm2_unmask_irq(unsigned int irq_nr) +static void cpm2_unmask_irq(unsigned int virq) { int bit, word; - volatile uint *simr; - - irq_nr -= CPM_IRQ_OFFSET; + unsigned int irq_nr = virq_to_hw(virq); bit = irq_to_siubit[irq_nr]; word = irq_to_siureg[irq_nr]; - simr = &(cpm2_intctl->ic_simrh); ppc_cached_irq_mask[word] |= 1 << bit; - simr[word] = ppc_cached_irq_mask[word]; + out_be32(&cpm2_intctl->ic_simrh + word, ppc_cached_irq_mask[word]); } -static void cpm2_mask_and_ack(unsigned int irq_nr) +static void cpm2_ack(unsigned int virq) { int bit, word; - volatile uint *simr, *sipnr; - - irq_nr -= CPM_IRQ_OFFSET; + unsigned int irq_nr = virq_to_hw(virq); bit = irq_to_siubit[irq_nr]; word = irq_to_siureg[irq_nr]; - simr = &(cpm2_intctl->ic_simrh); - sipnr = &(cpm2_intctl->ic_sipnrh); - ppc_cached_irq_mask[word] &= ~(1 << bit); - simr[word] = ppc_cached_irq_mask[word]; - sipnr[word] = 1 << bit; + out_be32(&cpm2_intctl->ic_sipnrh + word, 1 << bit); } -static void cpm2_end_irq(unsigned int irq_nr) +static void cpm2_end_irq(unsigned int virq) { int bit, word; - volatile uint *simr; + unsigned int irq_nr = virq_to_hw(virq); if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS)) && irq_desc[irq_nr].action) { - irq_nr -= CPM_IRQ_OFFSET; bit = irq_to_siubit[irq_nr]; word = irq_to_siureg[irq_nr]; - simr = &(cpm2_intctl->ic_simrh); ppc_cached_irq_mask[word] |= 1 << bit; - simr[word] = ppc_cached_irq_mask[word]; + out_be32(&cpm2_intctl->ic_simrh + word, ppc_cached_irq_mask[word]); + /* * Work around large numbers of spurious IRQs on PowerPC 82xx * systems. @@ -138,13 +136,59 @@ static void cpm2_end_irq(unsigned int irq_nr) } } +static int cpm2_set_irq_type(unsigned int virq, unsigned int flow_type) +{ + unsigned int src = virq_to_hw(virq); + struct irq_desc *desc = get_irq_desc(virq); + unsigned int vold, vnew, edibit; + + if (flow_type == IRQ_TYPE_NONE) + flow_type = IRQ_TYPE_LEVEL_LOW; + + if (flow_type & IRQ_TYPE_EDGE_RISING) { + printk(KERN_ERR "CPM2 PIC: sense type 0x%x not supported\n", + flow_type); + return -EINVAL; + } + + desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL); + desc->status |= flow_type & IRQ_TYPE_SENSE_MASK; + if (flow_type & IRQ_TYPE_LEVEL_LOW) { + desc->status |= IRQ_LEVEL; + desc->handle_irq = handle_level_irq; + } else + desc->handle_irq = handle_edge_irq; + + /* internal IRQ senses are LEVEL_LOW + * EXT IRQ and Port C IRQ senses are programmable + */ + if (src >= CPM2_IRQ_EXT1 && src <= CPM2_IRQ_EXT7) + edibit = (14 - (src - CPM2_IRQ_EXT1)); + else + if (src >= CPM2_IRQ_PORTC15 && src <= CPM2_IRQ_PORTC0) + edibit = (31 - (src - CPM2_IRQ_PORTC15)); + else + return (flow_type & IRQ_TYPE_LEVEL_LOW) ? 0 : -EINVAL; + + vold = in_be32(&cpm2_intctl->ic_siexr); + + if ((flow_type & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_FALLING) + vnew = vold | (1 << edibit); + else + vnew = vold & ~(1 << edibit); + + if (vold != vnew) + out_be32(&cpm2_intctl->ic_siexr, vnew); + return 0; +} + static struct irq_chip cpm2_pic = { .typename = " CPM2 SIU ", - .enable = cpm2_unmask_irq, - .disable = cpm2_mask_irq, + .mask = cpm2_mask_irq, .unmask = cpm2_unmask_irq, - .mask_ack = cpm2_mask_and_ack, - .end = cpm2_end_irq, + .ack = cpm2_ack, + .eoi = cpm2_end_irq, + .set_type = cpm2_set_irq_type, }; unsigned int cpm2_get_irq(void) @@ -154,17 +198,17 @@ unsigned int cpm2_get_irq(void) /* For CPM2, read the SIVEC register and shift the bits down * to get the irq number. */ - bits = cpm2_intctl->ic_sivec; + bits = in_be32(&cpm2_intctl->ic_sivec); irq = bits >> 26; if (irq == 0) return(-1); - return irq+CPM_IRQ_OFFSET; + return irq_linear_revmap(cpm2_pic_host, irq); } static int cpm2_pic_host_match(struct irq_host *h, struct device_node *node) { - return cpm2_pic_node == NULL || cpm2_pic_node == node; + return cpm2_pic_node == node; } static int cpm2_pic_host_map(struct irq_host *h, unsigned int virq, @@ -177,39 +221,21 @@ static int cpm2_pic_host_map(struct irq_host *h, unsigned int virq, return 0; } -static void cpm2_host_unmap(struct irq_host *h, unsigned int virq) -{ - /* Make sure irq is masked in hardware */ - cpm2_mask_irq(virq); - - /* remove chip and handler */ - set_irq_chip_and_handler(virq, NULL, NULL); -} - static int cpm2_pic_host_xlate(struct irq_host *h, struct device_node *ct, u32 *intspec, unsigned int intsize, irq_hw_number_t *out_hwirq, unsigned int *out_flags) { - static const unsigned char map_cpm2_senses[4] = { - IRQ_TYPE_LEVEL_LOW, - IRQ_TYPE_LEVEL_HIGH, - IRQ_TYPE_EDGE_FALLING, - IRQ_TYPE_EDGE_RISING, - }; - *out_hwirq = intspec[0]; - if (intsize > 1 && intspec[1] < 4) - *out_flags = map_cpm2_senses[intspec[1]]; + if (intsize > 1) + *out_flags = intspec[1]; else *out_flags = IRQ_TYPE_NONE; - return 0; } static struct irq_host_ops cpm2_pic_host_ops = { .match = cpm2_pic_host_match, .map = cpm2_pic_host_map, - .unmap = cpm2_host_unmap, .xlate = cpm2_pic_host_xlate, }; @@ -217,32 +243,34 @@ void cpm2_pic_init(struct device_node *node) { int i; + cpm2_intctl = cpm2_map(im_intctl); + /* Clear the CPM IRQ controller, in case it has any bits set * from the bootloader */ /* Mask out everything */ - cpm2_intctl->ic_simrh = 0x00000000; - cpm2_intctl->ic_simrl = 0x00000000; + out_be32(&cpm2_intctl->ic_simrh, 0x00000000); + out_be32(&cpm2_intctl->ic_simrl, 0x00000000); wmb(); /* Ack everything */ - cpm2_intctl->ic_sipnrh = 0xffffffff; - cpm2_intctl->ic_sipnrl = 0xffffffff; + out_be32(&cpm2_intctl->ic_sipnrh, 0xffffffff); + out_be32(&cpm2_intctl->ic_sipnrl, 0xffffffff); wmb(); /* Dummy read of the vector */ - i = cpm2_intctl->ic_sivec; + i = in_be32(&cpm2_intctl->ic_sivec); rmb(); /* Initialize the default interrupt mapping priorities, * in case the boot rom changed something on us. */ - cpm2_intctl->ic_sicr = 0; - cpm2_intctl->ic_scprrh = 0x05309770; - cpm2_intctl->ic_scprrl = 0x05309770; + out_be16(&cpm2_intctl->ic_sicr, 0); + out_be32(&cpm2_intctl->ic_scprrh, 0x05309770); + out_be32(&cpm2_intctl->ic_scprrl, 0x05309770); /* create a legacy host */ cpm2_pic_node = of_node_get(node); diff --git a/arch/powerpc/sysdev/cpm2_pic.h b/arch/powerpc/sysdev/cpm2_pic.h index 2840616529e4..30e5828a2781 100644 --- a/arch/powerpc/sysdev/cpm2_pic.h +++ b/arch/powerpc/sysdev/cpm2_pic.h @@ -1,8 +1,6 @@ #ifndef _PPC_KERNEL_CPM2_H #define _PPC_KERNEL_CPM2_H -extern intctl_cpm2_t *cpm2_intctl; - extern unsigned int cpm2_get_irq(void); extern void cpm2_pic_init(struct device_node*); -- cgit v1.2.3 From 5427828e83b7f3c000eaec1cfb09c9bc4d024ad1 Mon Sep 17 00:00:00 2001 From: Vitaly Bordug Date: Wed, 31 Jan 2007 02:09:00 +0300 Subject: [POWERPC] Fix kernel build errors for mpc8272ads and mpc8560ads Recent update of asm-powerpc/io.h caused cpm-related stuff to break in the current kernel. Current patch fixes it, as well as other inconsistencies expressed, that do not permit targets from working properly: - Updated dts with a chosen node with interrupt controller, - fixed messed device IDs among CPM2 SoC devices, - corrected odd header name and fixed type in defines, - Added 82xx subdir to the powerpc/platforms Makefile, missed during initial commit, - new solely-powerpc header file for 8260 family (was using one from arch/ppc, this one cleaned up from the extra stuff), in fact for now a placeholder to get the board-specific includes for stuff not yet capable to live with devicetree peeks only - Fixed couple of misprints in reference mpc8272 dts. Signed-off-by: Vitaly Bordug Signed-off-by: Paul Mackerras --- arch/powerpc/boot/dts/mpc8272ads.dts | 8 ++++---- arch/powerpc/platforms/82xx/mpc82xx.c | 2 +- arch/powerpc/platforms/82xx/mpc82xx_ads.c | 2 +- arch/powerpc/platforms/82xx/pq2ads.h | 5 +++-- arch/powerpc/platforms/Makefile | 1 + 5 files changed, 10 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/boot/dts/mpc8272ads.dts b/arch/powerpc/boot/dts/mpc8272ads.dts index 286638e8af6e..26b44f7513dc 100644 --- a/arch/powerpc/boot/dts/mpc8272ads.dts +++ b/arch/powerpc/boot/dts/mpc8272ads.dts @@ -65,8 +65,8 @@ #size-cells = <1>; #interrupt-cells = <2>; device_type = "soc"; - ranges = < 0 0 2 00000000 f0000000 00053000>; - reg = ; + ranges = <00000000 f0000000 00053000>; + reg = ; mdio@0 { device_type = "mdio"; @@ -130,8 +130,8 @@ #interrupt-cells = <2>; device_type = "cpm"; model = "CPM2"; - ranges = <00000000 00000000 3ffff>; - reg = <10d80 3280>; + ranges = <00000000 00000000 20000>; + reg = <0 20000>; command-proc = <119c0>; brg-frequency = <17D7840>; cpm_clk = ; diff --git a/arch/powerpc/platforms/82xx/mpc82xx.c b/arch/powerpc/platforms/82xx/mpc82xx.c index 0f5b30dc60da..74e7892cdfcf 100644 --- a/arch/powerpc/platforms/82xx/mpc82xx.c +++ b/arch/powerpc/platforms/82xx/mpc82xx.c @@ -50,7 +50,7 @@ #include #include -#include "pq2ads_pd.h" +#include "pq2ads.h" static int __init get_freq(char *name, unsigned long *val) { diff --git a/arch/powerpc/platforms/82xx/mpc82xx_ads.c b/arch/powerpc/platforms/82xx/mpc82xx_ads.c index ea880f1f0dcd..7334c1a15b90 100644 --- a/arch/powerpc/platforms/82xx/mpc82xx_ads.c +++ b/arch/powerpc/platforms/82xx/mpc82xx_ads.c @@ -51,7 +51,7 @@ #include #include <../sysdev/cpm2_pic.h> -#include "pq2ads_pd.h" +#include "pq2ads.h" #ifdef CONFIG_PCI static uint pci_clk_frq; diff --git a/arch/powerpc/platforms/82xx/pq2ads.h b/arch/powerpc/platforms/82xx/pq2ads.h index fb2f92bcd770..5b5cca6c8c88 100644 --- a/arch/powerpc/platforms/82xx/pq2ads.h +++ b/arch/powerpc/platforms/82xx/pq2ads.h @@ -22,6 +22,7 @@ #ifndef __MACH_ADS8260_DEFS #define __MACH_ADS8260_DEFS +#include #include /* For our show_cpuinfo hooks. */ @@ -46,12 +47,12 @@ #define BCSR1_RS232_EN1 ((uint)0x02000000) /* 0 ==enable */ #define BCSR1_RS232_EN2 ((uint)0x01000000) /* 0 ==enable */ #define BCSR3_FETHIEN2 ((uint)0x10000000) /* 0 == enable*/ -#define BCSR3_FETH2_RS ((uint)0x80000000) /* 0 == reset */ +#define BCSR3_FETH2_RST ((uint)0x80000000) /* 0 == reset */ /* cpm serial driver works with constants below */ #define SIU_INT_SMC1 ((uint)0x04+CPM_IRQ_OFFSET) -#define SIU_INT_SMC2i ((uint)0x05+CPM_IRQ_OFFSET) +#define SIU_INT_SMC2 ((uint)0x05+CPM_IRQ_OFFSET) #define SIU_INT_SCC1 ((uint)0x28+CPM_IRQ_OFFSET) #define SIU_INT_SCC2 ((uint)0x29+CPM_IRQ_OFFSET) #define SIU_INT_SCC3 ((uint)0x2a+CPM_IRQ_OFFSET) diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile index 7f03ea9ab366..f164005c66b9 100644 --- a/arch/powerpc/platforms/Makefile +++ b/arch/powerpc/platforms/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_PPC_MPC52xx) += 52xx/ obj-$(CONFIG_PPC_CHRP) += chrp/ obj-$(CONFIG_4xx) += 4xx/ obj-$(CONFIG_PPC_8xx) += 8xx/ +obj-$(CONFIG_PPC_82xx) += 82xx/ obj-$(CONFIG_PPC_83xx) += 83xx/ obj-$(CONFIG_PPC_85xx) += 85xx/ obj-$(CONFIG_PPC_86xx) += 86xx/ -- cgit v1.2.3 From c4cbfd64f933414eaa2042adcd276f088995898a Mon Sep 17 00:00:00 2001 From: Vitaly Bordug Date: Wed, 31 Jan 2007 02:09:06 +0300 Subject: [POWERPC] mpc8272ads: defconfig Default config file for mpc8272ads (powerpc port).Though relevant bits went in, it is required to keep proper default configuration for the target, which seems to be missed initially. Signed-off-by: Vitaly Bordug Signed-off-by: Paul Mackerras --- arch/powerpc/configs/mpc8272_ads_defconfig | 848 +++++++++++++++++++++++++++++ 1 file changed, 848 insertions(+) create mode 100644 arch/powerpc/configs/mpc8272_ads_defconfig (limited to 'arch') diff --git a/arch/powerpc/configs/mpc8272_ads_defconfig b/arch/powerpc/configs/mpc8272_ads_defconfig new file mode 100644 index 000000000000..2af45025082f --- /dev/null +++ b/arch/powerpc/configs/mpc8272_ads_defconfig @@ -0,0 +1,848 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.17-rc5 +# Fri Jul 14 20:36:35 2006 +# +# CONFIG_PPC64 is not set +CONFIG_PPC32=y +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +# CONFIG_PPC_UDBG_16550 is not set +# CONFIG_GENERIC_TBSYNC is not set +# CONFIG_DEFAULT_UIMAGE is not set + +# +# Processor support +# +# CONFIG_CLASSIC32 is not set +# CONFIG_PPC_52xx is not set +CONFIG_PPC_82xx=y +# CONFIG_PPC_83xx is not set +# CONFIG_PPC_85xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_8xx is not set +# CONFIG_E200 is not set +CONFIG_6xx=y +CONFIG_PPC_FPU=y +CONFIG_PPC_STD_MMU=y +CONFIG_PPC_STD_MMU_32=y +# CONFIG_SMP is not set + +# +# Code maturity level options +# +# CONFIG_EXPERIMENTAL is not set +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="powerpc8272" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_SLAB=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +# CONFIG_MODULES is not set + +# +# Block layer +# +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_PQ2ADS=y +CONFIG_8260=y +CONFIG_8272=y +CONFIG_CPM2=y +# CONFIG_WANT_EARLY_SERIAL is not set +CONFIG_EMBEDDEDBOOT=y + +# +# Platform support +# +CONFIG_ADS8272=y + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_MISC=y +# CONFIG_PC_KEYBOARD is not set +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +# CONFIG_SOFTWARE_SUSPEND is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +# CONFIG_PPC_I8259 is not set +CONFIG_FSL_SOC=y +# CONFIG_PCI is not set +# CONFIG_PCI_DOMAINS is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_BOOT_LOAD=0x00400000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +CONFIG_IPV6=y +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_IPV6_TUNNEL is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK is not set +# CONFIG_NETFILTER_XTABLES is not set + +# +# IP: Netfilter Configuration +# +# CONFIG_IP_NF_CONNTRACK is not set +# CONFIG_IP_NF_QUEUE is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +# CONFIG_IDE_GENERIC is not set +# CONFIG_IDE_ARM is not set +# CONFIG_BLK_DEV_IDEDMA is not set +# CONFIG_IDEDMA_AUTO is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Macintosh device drivers +# +# CONFIG_WINDFARM is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=y + +# +# PHY device support +# +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +CONFIG_DAVICOM_PHY=y +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_FIXED_PHY is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_FS_ENET=y +# CONFIG_FS_ENET_HAS_SCC is not set +CONFIG_FS_ENET_HAS_FCC=y + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +CONFIG_PPP=y +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=y +CONFIG_PPP_SYNC_TTY=y +CONFIG_PPP_DEFLATE=y +# CONFIG_PPP_BSDCOMP is not set +# CONFIG_SLIP is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_CPM=y +CONFIG_SERIAL_CPM_CONSOLE=y +CONFIG_SERIAL_CPM_SCC1=y +# CONFIG_SERIAL_CPM_SCC2 is not set +# CONFIG_SERIAL_CPM_SCC3 is not set +CONFIG_SERIAL_CPM_SCC4=y +# CONFIG_SERIAL_CPM_SMC1 is not set +# CONFIG_SERIAL_CPM_SMC2 is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_NVRAM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +CONFIG_VIDEO_V4L2=y + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_XFS_FS=y +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_SECURITY is not set +# CONFIG_XFS_POSIX_ACL is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y + +# +# Miscellaneous filesystems +# +# CONFIG_HFSPLUS_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SMB_FS=y +# CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y + +# +# Library routines +# +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_UNWIND_INFO is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_DEBUGGER is not set +# CONFIG_KGDB_CONSOLE is not set +CONFIG_BDI_SWITCH=y +# CONFIG_BOOTX_TEXT is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# -- cgit v1.2.3 From f79ce995d0a7bfc424b1ad8f315e62ff9f67bbfe Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Thu, 1 Feb 2007 16:36:04 +0100 Subject: [POWERPC] 86xx: local_irq_disable() is redundant after local_irq_save() arch/powerpc/platforms/86xx/mpc86xx_smp.c::smp_86xx_kick_cpu() contains local_irq_disable() call after local_irq_save(). This looks redundant. Signed-off-by: Jiri Kosina Acked-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/86xx/mpc86xx_smp.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/86xx/mpc86xx_smp.c b/arch/powerpc/platforms/86xx/mpc86xx_smp.c index bb7fb41933ad..7ef0c6854799 100644 --- a/arch/powerpc/platforms/86xx/mpc86xx_smp.c +++ b/arch/powerpc/platforms/86xx/mpc86xx_smp.c @@ -65,7 +65,6 @@ smp_86xx_kick_cpu(int nr) pr_debug("smp_86xx_kick_cpu: kick CPU #%d\n", nr); local_irq_save(flags); - local_irq_disable(); /* Save reset vector */ save_vector = *vector; -- cgit v1.2.3 From c23ef29c1efa6864527fb78249695679810d302e Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Thu, 1 Feb 2007 16:36:13 +0100 Subject: [POWERPC] powermac: local_irq_disable() is redundant after local_irq_save() arch/powerpc/platforms/powermac/smp.c::smp_core99_kick_cpu() contains local_irq_disable() call after local_irq_save(). This looks redundant. Signed-off-by: Jiri Kosina Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/powermac/smp.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c index eeb2ae5ffc58..d73fb73802bb 100644 --- a/arch/powerpc/platforms/powermac/smp.c +++ b/arch/powerpc/platforms/powermac/smp.c @@ -795,7 +795,6 @@ static void __devinit smp_core99_kick_cpu(int nr) ppc_md.progress("smp_core99_kick_cpu", 0x346); local_irq_save(flags); - local_irq_disable(); /* Save reset vector */ save_vector = *vector; -- cgit v1.2.3 From b8a590c496474ca80a8f1c2b228e8b8e6a33fb9d Mon Sep 17 00:00:00 2001 From: Ishizaki Kou Date: Fri, 2 Feb 2007 16:36:27 +0900 Subject: [POWERPC] Celleb: interfaces to the hypervisor This patch creates Celleb platform dependent files which add interfaces to call hypervisor. Signed-off-by: Kou Ishizaki Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/celleb/beat_wrapper.h | 220 ++++++++++++++++++++ arch/powerpc/platforms/celleb/hvCall.S | 287 +++++++++++++++++++++++++++ 2 files changed, 507 insertions(+) create mode 100644 arch/powerpc/platforms/celleb/beat_wrapper.h create mode 100644 arch/powerpc/platforms/celleb/hvCall.S (limited to 'arch') diff --git a/arch/powerpc/platforms/celleb/beat_wrapper.h b/arch/powerpc/platforms/celleb/beat_wrapper.h new file mode 100644 index 000000000000..76ea0a6a9011 --- /dev/null +++ b/arch/powerpc/platforms/celleb/beat_wrapper.h @@ -0,0 +1,220 @@ +/* + * Beat hypervisor call I/F + * + * (C) Copyright 2007 TOSHIBA CORPORATION + * + * This code is based on arch/powerpc/platforms/pseries/plpar_wrapper.h. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ +#ifndef BEAT_HCALL +#include "beat_syscall.h" + +/* defined in hvCall.S */ +extern s64 beat_hcall_norets(u64 opcode, ...); +extern s64 beat_hcall_norets8(u64 opcode, u64 arg1, u64 arg2, u64 arg3, + u64 arg4, u64 arg5, u64 arg6, u64 arg7, u64 arg8); +extern s64 beat_hcall1(u64 opcode, u64 retbuf[1], ...); +extern s64 beat_hcall2(u64 opcode, u64 retbuf[2], ...); +extern s64 beat_hcall3(u64 opcode, u64 retbuf[3], ...); +extern s64 beat_hcall4(u64 opcode, u64 retbuf[4], ...); +extern s64 beat_hcall5(u64 opcode, u64 retbuf[5], ...); +extern s64 beat_hcall6(u64 opcode, u64 retbuf[6], ...); + +static inline s64 beat_downcount_of_interrupt(u64 plug_id) +{ + return beat_hcall_norets(HV_downcount_of_interrupt, plug_id); +} + +static inline s64 beat_set_interrupt_mask(u64 index, + u64 val0, u64 val1, u64 val2, u64 val3) +{ + return beat_hcall_norets(HV_set_interrupt_mask, index, + val0, val1, val2, val3); +} + +static inline s64 beat_destruct_irq_plug(u64 plug_id) +{ + return beat_hcall_norets(HV_destruct_irq_plug, plug_id); +} + +static inline s64 beat_construct_and_connect_irq_plug(u64 plug_id, + u64 outlet_id) +{ + return beat_hcall_norets(HV_construct_and_connect_irq_plug, plug_id, + outlet_id); +} + +static inline s64 beat_detect_pending_interrupts(u64 index, u64 *retbuf) +{ + return beat_hcall4(HV_detect_pending_interrupts, retbuf, index); +} + +static inline s64 beat_pause(u64 style) +{ + return beat_hcall_norets(HV_pause, style); +} + +static inline s64 beat_read_htab_entries(u64 htab_id, u64 index, u64 *retbuf) +{ + return beat_hcall5(HV_read_htab_entries, retbuf, htab_id, index); +} + +static inline s64 beat_insert_htab_entry(u64 htab_id, u64 group, + u64 bitmask, u64 hpte_v, u64 hpte_r, u64 *slot) +{ + u64 dummy[3]; + s64 ret; + + ret = beat_hcall3(HV_insert_htab_entry, dummy, htab_id, group, + bitmask, hpte_v, hpte_r); + *slot = dummy[0]; + return ret; +} + +static inline s64 beat_write_htab_entry(u64 htab_id, u64 slot, + u64 hpte_v, u64 hpte_r, u64 mask_v, u64 mask_r, + u64 *ret_v, u64 *ret_r) +{ + u64 dummy[2]; + s64 ret; + + ret = beat_hcall2(HV_write_htab_entry, dummy, htab_id, slot, + hpte_v, hpte_r, mask_v, mask_r); + *ret_v = dummy[0]; + *ret_r = dummy[1]; + return ret; +} + +static inline void beat_shutdown_logical_partition(u64 code) +{ + (void)beat_hcall_norets(HV_shutdown_logical_partition, code); +} + +static inline s64 beat_rtc_write(u64 time_from_epoch) +{ + return beat_hcall_norets(HV_rtc_write, time_from_epoch); +} + +static inline s64 beat_rtc_read(u64 *time_from_epoch) +{ + u64 dummy[1]; + s64 ret; + + ret = beat_hcall1(HV_rtc_read, dummy); + *time_from_epoch = dummy[0]; + return ret; +} + +#define BEAT_NVRW_CNT (sizeof(u64) * 6) + +static inline s64 beat_eeprom_write(u64 index, u64 length, u8 *buffer) +{ + u64 b[6]; + + if (length > BEAT_NVRW_CNT) + return -1; + memcpy(b, buffer, sizeof(b)); + return beat_hcall_norets8(HV_eeprom_write, index, length, + b[0], b[1], b[2], b[3], b[4], b[5]); +} + +static inline s64 beat_eeprom_read(u64 index, u64 length, u8 *buffer) +{ + u64 b[6]; + s64 ret; + + if (length > BEAT_NVRW_CNT) + return -1; + ret = beat_hcall6(HV_eeprom_read, b, index, length); + memcpy(buffer, b, length); + return ret; +} + +static inline s64 beat_set_dabr(u64 value, u64 style) +{ + return beat_hcall_norets(HV_set_dabr, value, style); +} + +static inline s64 beat_get_characters_from_console(u64 termno, u64 *len, + u8 *buffer) +{ + u64 dummy[3]; + s64 ret; + + ret = beat_hcall3(HV_get_characters_from_console, dummy, termno, len); + *len = dummy[0]; + memcpy(buffer, dummy + 1, *len); + return ret; +} + +static inline s64 beat_put_characters_to_console(u64 termno, u64 len, + u8 *buffer) +{ + u64 b[2]; + + memcpy(b, buffer, len); + return beat_hcall_norets(HV_put_characters_to_console, termno, len, b[0], b[1]); +} + +static inline s64 beat_get_spe_privileged_state_1_registers( + u64 id, u64 offsetof, u64 *value) +{ + u64 dummy[1]; + s64 ret; + + ret = beat_hcall1(HV_get_spe_privileged_state_1_registers, dummy, id, + offsetof); + *value = dummy[0]; + return ret; +} + +static inline s64 beat_set_irq_mask_for_spe(u64 id, u64 class, u64 mask) +{ + return beat_hcall_norets(HV_set_irq_mask_for_spe, id, class, mask); +} + +static inline s64 beat_clear_interrupt_status_of_spe(u64 id, u64 class, + u64 mask) +{ + return beat_hcall_norets(HV_clear_interrupt_status_of_spe, + id, class, mask); +} + +static inline s64 beat_set_spe_privileged_state_1_registers( + u64 id, u64 offsetof, u64 value) +{ + return beat_hcall_norets(HV_set_spe_privileged_state_1_registers, + id, offsetof, value); +} + +static inline s64 beat_get_interrupt_status_of_spe(u64 id, u64 class, u64 *val) +{ + u64 dummy[1]; + s64 ret; + + ret = beat_hcall1(HV_get_interrupt_status_of_spe, dummy, id, class); + *val = dummy[0]; + return ret; +} + +static inline s64 beat_put_iopte(u64 ioas_id, u64 io_addr, u64 real_addr, + u64 ioid, u64 flags) +{ + return beat_hcall_norets(HV_put_iopte, ioas_id, io_addr, real_addr, + ioid, flags); +} + +#endif diff --git a/arch/powerpc/platforms/celleb/hvCall.S b/arch/powerpc/platforms/celleb/hvCall.S new file mode 100644 index 000000000000..74c817448948 --- /dev/null +++ b/arch/powerpc/platforms/celleb/hvCall.S @@ -0,0 +1,287 @@ +/* + * Beat hypervisor call I/F + * + * (C) Copyright 2007 TOSHIBA CORPORATION + * + * This code is based on arch/powerpc/platforms/pseries/hvCall.S. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include + +#define STK_PARM(i) (48 + ((i)-3)*8) + +/* Not implemented on Beat, now */ +#define HCALL_INST_PRECALL +#define HCALL_INST_POSTCALL + + .text + +#define HVSC .long 0x44000022 + +/* Note: takes only 7 input parameters at maximum */ +_GLOBAL(beat_hcall_norets) + HMT_MEDIUM + + mfcr r0 + stw r0,8(r1) + + HCALL_INST_PRECALL + + mr r11,r3 + mr r3,r4 + mr r4,r5 + mr r5,r6 + mr r6,r7 + mr r7,r8 + mr r8,r9 + + HVSC /* invoke the hypervisor */ + + HCALL_INST_POSTCALL + + lwz r0,8(r1) + mtcrf 0xff,r0 + + blr /* return r3 = status */ + +/* Note: takes 8 input parameters at maximum */ +_GLOBAL(beat_hcall_norets8) + HMT_MEDIUM + + mfcr r0 + stw r0,8(r1) + + HCALL_INST_PRECALL + + mr r11,r3 + mr r3,r4 + mr r4,r5 + mr r5,r6 + mr r6,r7 + mr r7,r8 + mr r8,r9 + ld r10,STK_PARM(r10)(r1) + + HVSC /* invoke the hypervisor */ + + HCALL_INST_POSTCALL + + lwz r0,8(r1) + mtcrf 0xff,r0 + + blr /* return r3 = status */ + +/* Note: takes only 6 input parameters, 1 output parameters at maximum */ +_GLOBAL(beat_hcall1) + HMT_MEDIUM + + mfcr r0 + stw r0,8(r1) + + HCALL_INST_PRECALL + + std r4,STK_PARM(r4)(r1) /* save ret buffer */ + + mr r11,r3 + mr r3,r5 + mr r4,r6 + mr r5,r7 + mr r6,r8 + mr r7,r9 + mr r8,r10 + + HVSC /* invoke the hypervisor */ + + HCALL_INST_POSTCALL + + ld r12,STK_PARM(r4)(r1) + std r4, 0(r12) + + lwz r0,8(r1) + mtcrf 0xff,r0 + + blr /* return r3 = status */ + +/* Note: takes only 6 input parameters, 2 output parameters at maximum */ +_GLOBAL(beat_hcall2) + HMT_MEDIUM + + mfcr r0 + stw r0,8(r1) + + HCALL_INST_PRECALL + + std r4,STK_PARM(r4)(r1) /* save ret buffer */ + + mr r11,r3 + mr r3,r5 + mr r4,r6 + mr r5,r7 + mr r6,r8 + mr r7,r9 + mr r8,r10 + + HVSC /* invoke the hypervisor */ + + HCALL_INST_POSTCALL + + ld r12,STK_PARM(r4)(r1) + std r4, 0(r12) + std r5, 8(r12) + + lwz r0,8(r1) + mtcrf 0xff,r0 + + blr /* return r3 = status */ + +/* Note: takes only 6 input parameters, 3 output parameters at maximum */ +_GLOBAL(beat_hcall3) + HMT_MEDIUM + + mfcr r0 + stw r0,8(r1) + + HCALL_INST_PRECALL + + std r4,STK_PARM(r4)(r1) /* save ret buffer */ + + mr r11,r3 + mr r3,r5 + mr r4,r6 + mr r5,r7 + mr r6,r8 + mr r7,r9 + mr r8,r10 + + HVSC /* invoke the hypervisor */ + + HCALL_INST_POSTCALL + + ld r12,STK_PARM(r4)(r1) + std r4, 0(r12) + std r5, 8(r12) + std r6, 16(r12) + + lwz r0,8(r1) + mtcrf 0xff,r0 + + blr /* return r3 = status */ + +/* Note: takes only 6 input parameters, 4 output parameters at maximum */ +_GLOBAL(beat_hcall4) + HMT_MEDIUM + + mfcr r0 + stw r0,8(r1) + + HCALL_INST_PRECALL + + std r4,STK_PARM(r4)(r1) /* save ret buffer */ + + mr r11,r3 + mr r3,r5 + mr r4,r6 + mr r5,r7 + mr r6,r8 + mr r7,r9 + mr r8,r10 + + HVSC /* invoke the hypervisor */ + + HCALL_INST_POSTCALL + + ld r12,STK_PARM(r4)(r1) + std r4, 0(r12) + std r5, 8(r12) + std r6, 16(r12) + std r7, 24(r12) + + lwz r0,8(r1) + mtcrf 0xff,r0 + + blr /* return r3 = status */ + +/* Note: takes only 6 input parameters, 5 output parameters at maximum */ +_GLOBAL(beat_hcall5) + HMT_MEDIUM + + mfcr r0 + stw r0,8(r1) + + HCALL_INST_PRECALL + + std r4,STK_PARM(r4)(r1) /* save ret buffer */ + + mr r11,r3 + mr r3,r5 + mr r4,r6 + mr r5,r7 + mr r6,r8 + mr r7,r9 + mr r8,r10 + + HVSC /* invoke the hypervisor */ + + HCALL_INST_POSTCALL + + ld r12,STK_PARM(r4)(r1) + std r4, 0(r12) + std r5, 8(r12) + std r6, 16(r12) + std r7, 24(r12) + std r8, 32(r12) + + lwz r0,8(r1) + mtcrf 0xff,r0 + + blr /* return r3 = status */ + +/* Note: takes only 6 input parameters, 6 output parameters at maximum */ +_GLOBAL(beat_hcall6) + HMT_MEDIUM + + mfcr r0 + stw r0,8(r1) + + HCALL_INST_PRECALL + + std r4,STK_PARM(r4)(r1) /* save ret buffer */ + + mr r11,r3 + mr r3,r5 + mr r4,r6 + mr r5,r7 + mr r6,r8 + mr r7,r9 + mr r8,r10 + + HVSC /* invoke the hypervisor */ + + HCALL_INST_POSTCALL + + ld r12,STK_PARM(r4)(r1) + std r4, 0(r12) + std r5, 8(r12) + std r6, 16(r12) + std r7, 24(r12) + std r8, 32(r12) + std r9, 40(r12) + + lwz r0,8(r1) + mtcrf 0xff,r0 + + blr /* return r3 = status */ -- cgit v1.2.3 From 32f39b055f3b7af4ee76a93ede5450ab2549328a Mon Sep 17 00:00:00 2001 From: Ishizaki Kou Date: Fri, 2 Feb 2007 16:37:30 +0900 Subject: [POWERPC] Celleb: support interrupts This patch creates Celleb platform dependent files to support interrupts. Signed-off-by: Kou Ishizaki Acked-by: Arnd Bergmann Acked-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/celleb/interrupt.c | 274 ++++++++++++++++++++++++++++++ arch/powerpc/platforms/celleb/interrupt.h | 33 ++++ 2 files changed, 307 insertions(+) create mode 100644 arch/powerpc/platforms/celleb/interrupt.c create mode 100644 arch/powerpc/platforms/celleb/interrupt.h (limited to 'arch') diff --git a/arch/powerpc/platforms/celleb/interrupt.c b/arch/powerpc/platforms/celleb/interrupt.c new file mode 100644 index 000000000000..98e6665681d3 --- /dev/null +++ b/arch/powerpc/platforms/celleb/interrupt.c @@ -0,0 +1,274 @@ +/* + * Celleb/Beat Interrupt controller + * + * (C) Copyright 2006-2007 TOSHIBA CORPORATION + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include +#include +#include +#include +#include + +#include + +#include "interrupt.h" +#include "beat_wrapper.h" + +#define MAX_IRQS NR_IRQS +static DEFINE_SPINLOCK(beatic_irq_mask_lock); +static uint64_t beatic_irq_mask_enable[(MAX_IRQS+255)/64]; +static uint64_t beatic_irq_mask_ack[(MAX_IRQS+255)/64]; + +static struct irq_host *beatic_host = NULL; + +/* + * In this implementation, "virq" == "IRQ plug number", + * "(irq_hw_number_t)hwirq" == "IRQ outlet number". + */ + +/* assumption: locked */ +static inline void beatic_update_irq_mask(unsigned int irq_plug) +{ + int off; + unsigned long masks[4]; + + off = (irq_plug / 256) * 4; + masks[0] = beatic_irq_mask_enable[off + 0] + & beatic_irq_mask_ack[off + 0]; + masks[1] = beatic_irq_mask_enable[off + 1] + & beatic_irq_mask_ack[off + 1]; + masks[2] = beatic_irq_mask_enable[off + 2] + & beatic_irq_mask_ack[off + 2]; + masks[3] = beatic_irq_mask_enable[off + 3] + & beatic_irq_mask_ack[off + 3]; + if (beat_set_interrupt_mask(irq_plug&~255UL, + masks[0], masks[1], masks[2], masks[3]) != 0) + panic("Failed to set mask IRQ!"); +} + +static void beatic_mask_irq(unsigned int irq_plug) +{ + unsigned long flags; + + spin_lock_irqsave(&beatic_irq_mask_lock, flags); + beatic_irq_mask_enable[irq_plug/64] &= ~(1UL << (63 - (irq_plug%64))); + beatic_update_irq_mask(irq_plug); + spin_unlock_irqrestore(&beatic_irq_mask_lock, flags); +} + +static void beatic_unmask_irq(unsigned int irq_plug) +{ + unsigned long flags; + + spin_lock_irqsave(&beatic_irq_mask_lock, flags); + beatic_irq_mask_enable[irq_plug/64] |= 1UL << (63 - (irq_plug%64)); + beatic_update_irq_mask(irq_plug); + spin_unlock_irqrestore(&beatic_irq_mask_lock, flags); +} + +static void beatic_ack_irq(unsigned int irq_plug) +{ + unsigned long flags; + + spin_lock_irqsave(&beatic_irq_mask_lock, flags); + beatic_irq_mask_ack[irq_plug/64] &= ~(1UL << (63 - (irq_plug%64))); + beatic_update_irq_mask(irq_plug); + spin_unlock_irqrestore(&beatic_irq_mask_lock, flags); +} + +static void beatic_end_irq(unsigned int irq_plug) +{ + s64 err; + unsigned long flags; + + if ((err = beat_downcount_of_interrupt(irq_plug)) != 0) { + if ((err & 0xFFFFFFFF) != 0xFFFFFFF5) /* -11: wrong state */ + panic("Failed to downcount IRQ! Error = %16lx", err); + + printk(KERN_ERR "IRQ over-downcounted, plug %d\n", irq_plug); + } + spin_lock_irqsave(&beatic_irq_mask_lock, flags); + beatic_irq_mask_ack[irq_plug/64] |= 1UL << (63 - (irq_plug%64)); + beatic_update_irq_mask(irq_plug); + spin_unlock_irqrestore(&beatic_irq_mask_lock, flags); +} + +static struct irq_chip beatic_pic = { + .typename = " CELL-BEAT ", + .unmask = beatic_unmask_irq, + .mask = beatic_mask_irq, + .eoi = beatic_end_irq, +}; + +/* + * Dispose binding hardware IRQ number (hw) and Virtuql IRQ number (virq), + * update flags. + * + * Note that the number (virq) is already assigned at upper layer. + */ +static void beatic_pic_host_unmap(struct irq_host *h, unsigned int virq) +{ + beat_destruct_irq_plug(virq); +} + +/* + * Create or update binding hardware IRQ number (hw) and Virtuql + * IRQ number (virq). This is called only once for a given mapping. + * + * Note that the number (virq) is already assigned at upper layer. + */ +static int beatic_pic_host_map(struct irq_host *h, unsigned int virq, + irq_hw_number_t hw) +{ + struct irq_desc *desc = get_irq_desc(virq); + int64_t err; + + if ((err = beat_construct_and_connect_irq_plug(virq, hw)) < 0) + return -EIO; + + desc->status |= IRQ_LEVEL; + set_irq_chip_and_handler(virq, &beatic_pic, handle_fasteoi_irq); + return 0; +} + +/* + * Update binding hardware IRQ number (hw) and Virtuql + * IRQ number (virq). This is called only once for a given mapping. + */ +static void beatic_pic_host_remap(struct irq_host *h, unsigned int virq, + irq_hw_number_t hw) +{ + beat_construct_and_connect_irq_plug(virq, hw); +} + +/* + * Translate device-tree interrupt spec to irq_hw_number_t style (ulong), + * to pass away to irq_create_mapping(). + * + * Called from irq_create_of_mapping() only. + * Note: We have only 1 entry to translate. + */ +static int beatic_pic_host_xlate(struct irq_host *h, struct device_node *ct, + u32 *intspec, unsigned int intsize, + irq_hw_number_t *out_hwirq, + unsigned int *out_flags) +{ + u64 *intspec2 = (u64 *)intspec; + + *out_hwirq = *intspec2; + *out_flags |= IRQ_TYPE_LEVEL_LOW; + return 0; +} + +static struct irq_host_ops beatic_pic_host_ops = { + .map = beatic_pic_host_map, + .remap = beatic_pic_host_remap, + .unmap = beatic_pic_host_unmap, + .xlate = beatic_pic_host_xlate, +}; + +/* + * Get an IRQ number + * Note: returns VIRQ + */ +static inline unsigned int beatic_get_irq_plug(void) +{ + int i; + uint64_t pending[4], ub; + + for (i = 0; i < MAX_IRQS; i += 256) { + beat_detect_pending_interrupts(i, pending); + __asm__ ("cntlzd %0,%1":"=r"(ub): + "r"(pending[0] & beatic_irq_mask_enable[i/64+0] + & beatic_irq_mask_ack[i/64+0])); + if (ub != 64) + return i + ub + 0; + __asm__ ("cntlzd %0,%1":"=r"(ub): + "r"(pending[1] & beatic_irq_mask_enable[i/64+1] + & beatic_irq_mask_ack[i/64+1])); + if (ub != 64) + return i + ub + 64; + __asm__ ("cntlzd %0,%1":"=r"(ub): + "r"(pending[2] & beatic_irq_mask_enable[i/64+2] + & beatic_irq_mask_ack[i/64+2])); + if (ub != 64) + return i + ub + 128; + __asm__ ("cntlzd %0,%1":"=r"(ub): + "r"(pending[3] & beatic_irq_mask_enable[i/64+3] + & beatic_irq_mask_ack[i/64+3])); + if (ub != 64) + return i + ub + 192; + } + + return NO_IRQ; +} +unsigned int beatic_get_irq(void) +{ + unsigned int ret; + + ret = beatic_get_irq_plug(); + if (ret != NO_IRQ) + beatic_ack_irq(ret); + return ret; +} + +/* + */ +void __init beatic_init_IRQ(void) +{ + int i; + + memset(beatic_irq_mask_enable, 0, sizeof(beatic_irq_mask_enable)); + memset(beatic_irq_mask_ack, 255, sizeof(beatic_irq_mask_ack)); + for (i = 0; i < MAX_IRQS; i += 256) + beat_set_interrupt_mask(i, 0L, 0L, 0L, 0L); + + /* Set out get_irq function */ + ppc_md.get_irq = beatic_get_irq; + + /* Allocate an irq host */ + beatic_host = irq_alloc_host(IRQ_HOST_MAP_NOMAP, 0, + &beatic_pic_host_ops, + 0); + BUG_ON(beatic_host == NULL); + irq_set_default_host(beatic_host); +} + +#ifdef CONFIG_SMP + +/* Nullified to compile with SMP mode */ +void beatic_setup_cpu(int cpu) +{ +} + +void beatic_cause_IPI(int cpu, int mesg) +{ +} + +void beatic_request_IPIs(void) +{ +} +#endif /* CONFIG_SMP */ + +void beatic_deinit_IRQ(void) +{ + int i; + + for (i = 1; i < NR_IRQS; i++) + beat_destruct_irq_plug(i); +} diff --git a/arch/powerpc/platforms/celleb/interrupt.h b/arch/powerpc/platforms/celleb/interrupt.h new file mode 100644 index 000000000000..b470fd0051f1 --- /dev/null +++ b/arch/powerpc/platforms/celleb/interrupt.h @@ -0,0 +1,33 @@ +/* + * Celleb/Beat Interrupt controller + * + * (C) Copyright 2006 TOSHIBA CORPORATION + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef ASM_BEAT_PIC_H +#define ASM_BEAT_PIC_H +#ifdef __KERNEL__ + +extern void beatic_init_IRQ(void); +extern unsigned int beatic_get_irq(void); +extern void beatic_cause_IPI(int cpu, int mesg); +extern void beatic_request_IPIs(void); +extern void beatic_setup_cpu(int); +extern void beatic_deinit_IRQ(void); + +#endif +#endif /* ASM_BEAT_PIC_H */ -- cgit v1.2.3 From 7163c7c9d266862ad9a0a0203d204113034cb5fb Mon Sep 17 00:00:00 2001 From: Ishizaki Kou Date: Fri, 2 Feb 2007 16:38:41 +0900 Subject: [POWERPC] Celleb: setup usb host controller in SCC USB host controller in SCC requires enable sequence. It should be done before USB host drivers start. Signed-off-by: Kou Ishizaki Acked-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/celleb/scc_uhc.c | 94 +++++++++++++++++++++++++++++++++ 1 file changed, 94 insertions(+) create mode 100644 arch/powerpc/platforms/celleb/scc_uhc.c (limited to 'arch') diff --git a/arch/powerpc/platforms/celleb/scc_uhc.c b/arch/powerpc/platforms/celleb/scc_uhc.c new file mode 100644 index 000000000000..a7c548bde2e3 --- /dev/null +++ b/arch/powerpc/platforms/celleb/scc_uhc.c @@ -0,0 +1,94 @@ +/* + * SCC (Super Companion Chip) UHC setup + * + * (C) Copyright 2006-2007 TOSHIBA CORPORATION + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include +#include + +#include +#include +#include + +#include "scc.h" + +#define UHC_RESET_WAIT_MAX 10000 + +static inline int uhc_clkctrl_ready(u32 val) +{ + const u32 mask = SCC_UHC_USBCEN | SCC_UHC_USBCEN; + return((val & mask) == mask); +} + +/* + * UHC(usb host controler) enable function. + * affect to both of OHCI and EHCI core module. + */ +static void enable_scc_uhc(struct pci_dev *dev) +{ + void __iomem *uhc_base; + u32 __iomem *uhc_clkctrl; + u32 __iomem *uhc_ecmode; + u32 val = 0; + int i; + + if (!machine_is(celleb)) + return; + + uhc_base = ioremap(pci_resource_start(dev, 0), + pci_resource_len(dev, 0)); + if (!uhc_base) { + printk(KERN_ERR "failed to map UHC register base.\n"); + return; + } + uhc_clkctrl = uhc_base + SCC_UHC_CKRCTRL; + uhc_ecmode = uhc_base + SCC_UHC_ECMODE; + + /* setup for normal mode */ + val |= SCC_UHC_F48MCKLEN; + out_be32(uhc_clkctrl, val); + val |= SCC_UHC_PHY_SUSPEND_SEL; + out_be32(uhc_clkctrl, val); + udelay(10); + val |= SCC_UHC_PHYEN; + out_be32(uhc_clkctrl, val); + udelay(50); + + /* disable reset */ + val |= SCC_UHC_HCLKEN; + out_be32(uhc_clkctrl, val); + val |= (SCC_UHC_USBCEN | SCC_UHC_USBEN); + out_be32(uhc_clkctrl, val); + i = 0; + while (!uhc_clkctrl_ready(in_be32(uhc_clkctrl))) { + udelay(10); + if (i++ > UHC_RESET_WAIT_MAX) { + printk(KERN_ERR "Failed to disable UHC reset %x\n", + in_be32(uhc_clkctrl)); + break; + } + } + + /* Endian Conversion Mode for Master ALL area */ + out_be32(uhc_ecmode, SCC_UHC_ECMODE_BY_BYTE); + + iounmap(uhc_base); +} + +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA_2, + PCI_DEVICE_ID_TOSHIBA_SCC_USB, enable_scc_uhc); -- cgit v1.2.3 From 97a9b58409403baf7a8b0ccbd3d27993790dcdab Mon Sep 17 00:00:00 2001 From: Ishizaki Kou Date: Fri, 2 Feb 2007 16:39:34 +0900 Subject: [POWERPC] Celleb: support iommu This patch creates Celleb platform dependent file to support iommu. Signed-off-by: Kou Ishizaki Acked-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/celleb/iommu.c | 104 ++++++++++++++++++++++++++++++++++ 1 file changed, 104 insertions(+) create mode 100644 arch/powerpc/platforms/celleb/iommu.c (limited to 'arch') diff --git a/arch/powerpc/platforms/celleb/iommu.c b/arch/powerpc/platforms/celleb/iommu.c new file mode 100644 index 000000000000..f63b94c65353 --- /dev/null +++ b/arch/powerpc/platforms/celleb/iommu.c @@ -0,0 +1,104 @@ +/* + * Support for IOMMU on Celleb platform. + * + * (C) Copyright 2006-2007 TOSHIBA CORPORATION + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include +#include +#include +#include + +#include + +#include "beat_wrapper.h" + +#define DMA_FLAGS 0xf800000000000000UL /* r/w permitted, coherency required, + strongest order */ + +static int __init find_dma_window(u64 *io_space_id, u64 *ioid, + u64 *base, u64 *size, u64 *io_page_size) +{ + struct device_node *dn; + const unsigned long *dma_window; + + for_each_node_by_type(dn, "ioif") { + dma_window = get_property(dn, "toshiba,dma-window", NULL); + if (dma_window) { + *io_space_id = (dma_window[0] >> 32) & 0xffffffffUL; + *ioid = dma_window[0] & 0x7ffUL; + *base = dma_window[1]; + *size = dma_window[2]; + *io_page_size = 1 << dma_window[3]; + of_node_put(dn); + return 1; + } + } + return 0; +} + +static void __init celleb_init_direct_mapping(void) +{ + u64 lpar_addr, io_addr; + u64 io_space_id, ioid, dma_base, dma_size, io_page_size; + + if (!find_dma_window(&io_space_id, &ioid, &dma_base, &dma_size, + &io_page_size)) { + pr_info("No dma window found !\n"); + return; + } + + for (lpar_addr = 0; lpar_addr < dma_size; lpar_addr += io_page_size) { + io_addr = lpar_addr + dma_base; + (void)beat_put_iopte(io_space_id, io_addr, lpar_addr, + ioid, DMA_FLAGS); + } + + dma_direct_offset = dma_base; +} + +static int celleb_of_bus_notify(struct notifier_block *nb, + unsigned long action, void *data) +{ + struct device *dev = data; + + /* We are only intereted in device addition */ + if (action != BUS_NOTIFY_ADD_DEVICE) + return 0; + + dev->archdata.dma_ops = pci_dma_ops; + + return 0; +} + +static struct notifier_block celleb_of_bus_notifier = { + .notifier_call = celleb_of_bus_notify +}; + +static int __init celleb_init_iommu(void) +{ + if (!machine_is(celleb)) + return -ENODEV; + + celleb_init_direct_mapping(); + pci_dma_ops = &dma_direct_ops; + bus_register_notifier(&of_platform_bus_type, &celleb_of_bus_notifier); + + return 0; +} + +arch_initcall(celleb_init_iommu); -- cgit v1.2.3 From fe4a0cf1c2e79c3c256992c4f731734ecacb45c3 Mon Sep 17 00:00:00 2001 From: Ishizaki Kou Date: Fri, 2 Feb 2007 16:42:28 +0900 Subject: [POWERPC] Celleb: htab routines Adds htab routines for Celleb platform. Signed-off-by: Kou Ishizaki Acked-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/celleb/htab.c | 311 +++++++++++++++++++++++++++++++++++ 1 file changed, 311 insertions(+) create mode 100644 arch/powerpc/platforms/celleb/htab.c (limited to 'arch') diff --git a/arch/powerpc/platforms/celleb/htab.c b/arch/powerpc/platforms/celleb/htab.c new file mode 100644 index 000000000000..ffa7c2c2030d --- /dev/null +++ b/arch/powerpc/platforms/celleb/htab.c @@ -0,0 +1,311 @@ +/* + * "Cell Reference Set" HTAB support. + * + * (C) Copyright 2006-2007 TOSHIBA CORPORATION + * + * This code is based on arch/powerpc/platforms/pseries/lpar.c: + * Copyright (C) 2001 Todd Inglett, IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#undef DEBUG_LOW + +#include +#include + +#include +#include +#include +#include +#include + +#include "beat_wrapper.h" + +#ifdef DEBUG_LOW +#define DBG_LOW(fmt...) do { udbg_printf(fmt); } while(0) +#else +#define DBG_LOW(fmt...) do { } while(0) +#endif + +static DEFINE_SPINLOCK(beat_htab_lock); + +static inline unsigned int beat_read_mask(unsigned hpte_group) +{ + unsigned long hpte_v[5]; + unsigned long rmask = 0; + + beat_read_htab_entries(0, hpte_group + 0, hpte_v); + if (!(hpte_v[0] & HPTE_V_BOLTED)) + rmask |= 0x8000; + if (!(hpte_v[1] & HPTE_V_BOLTED)) + rmask |= 0x4000; + if (!(hpte_v[2] & HPTE_V_BOLTED)) + rmask |= 0x2000; + if (!(hpte_v[3] & HPTE_V_BOLTED)) + rmask |= 0x1000; + beat_read_htab_entries(0, hpte_group + 4, hpte_v); + if (!(hpte_v[0] & HPTE_V_BOLTED)) + rmask |= 0x0800; + if (!(hpte_v[1] & HPTE_V_BOLTED)) + rmask |= 0x0400; + if (!(hpte_v[2] & HPTE_V_BOLTED)) + rmask |= 0x0200; + if (!(hpte_v[3] & HPTE_V_BOLTED)) + rmask |= 0x0100; + hpte_group = ~hpte_group & (htab_hash_mask * HPTES_PER_GROUP); + beat_read_htab_entries(0, hpte_group + 0, hpte_v); + if (!(hpte_v[0] & HPTE_V_BOLTED)) + rmask |= 0x80; + if (!(hpte_v[1] & HPTE_V_BOLTED)) + rmask |= 0x40; + if (!(hpte_v[2] & HPTE_V_BOLTED)) + rmask |= 0x20; + if (!(hpte_v[3] & HPTE_V_BOLTED)) + rmask |= 0x10; + beat_read_htab_entries(0, hpte_group + 4, hpte_v); + if (!(hpte_v[0] & HPTE_V_BOLTED)) + rmask |= 0x08; + if (!(hpte_v[1] & HPTE_V_BOLTED)) + rmask |= 0x04; + if (!(hpte_v[2] & HPTE_V_BOLTED)) + rmask |= 0x02; + if (!(hpte_v[3] & HPTE_V_BOLTED)) + rmask |= 0x01; + return rmask; +} + +static long beat_lpar_hpte_insert(unsigned long hpte_group, + unsigned long va, unsigned long pa, + unsigned long rflags, unsigned long vflags, + int psize) +{ + unsigned long lpar_rc; + unsigned long slot; + unsigned long hpte_v, hpte_r; + unsigned long flags; + + /* same as iseries */ + if (vflags & HPTE_V_SECONDARY) + return -1; + + if (!(vflags & HPTE_V_BOLTED)) + DBG_LOW("hpte_insert(group=%lx, va=%016lx, pa=%016lx, " + "rflags=%lx, vflags=%lx, psize=%d)\n", + hpte_group, va, pa, rflags, vflags, psize); + + hpte_v = hpte_encode_v(va, psize) | vflags | HPTE_V_VALID; + hpte_r = hpte_encode_r(pa, psize) | rflags; + + if (!(vflags & HPTE_V_BOLTED)) + DBG_LOW(" hpte_v=%016lx, hpte_r=%016lx\n", hpte_v, hpte_r); + + if (rflags & (_PAGE_GUARDED|_PAGE_NO_CACHE)) + hpte_r &= ~_PAGE_COHERENT; + + spin_lock_irqsave(&beat_htab_lock, flags); + if ((lpar_rc = beat_read_mask(hpte_group)) == 0) { + if (!(vflags & HPTE_V_BOLTED)) + DBG_LOW(" full\n"); + spin_unlock_irqrestore(&beat_htab_lock, flags); + return -1; + } + + lpar_rc = beat_insert_htab_entry(0, hpte_group, lpar_rc << 48, + hpte_v, hpte_r, &slot); + spin_unlock_irqrestore(&beat_htab_lock, flags); + + /* + * Since we try and ioremap PHBs we don't own, the pte insert + * will fail. However we must catch the failure in hash_page + * or we will loop forever, so return -2 in this case. + */ + if (unlikely(lpar_rc != 0)) { + if (!(vflags & HPTE_V_BOLTED)) + DBG_LOW(" lpar err %lx\n", lpar_rc); + return -2; + } + if (!(vflags & HPTE_V_BOLTED)) + DBG_LOW(" -> slot: %lx\n", slot); + + /* We have to pass down the secondary bucket bit here as well */ + return (slot ^ hpte_group) & 15; +} + +static long beat_lpar_hpte_remove(unsigned long hpte_group) +{ + DBG_LOW("hpte_remove(group=%lx)\n", hpte_group); + return -1; +} + +static unsigned long beat_lpar_hpte_getword0(unsigned long slot) +{ + unsigned long dword0, dword[5]; + unsigned long lpar_rc; + + lpar_rc = beat_read_htab_entries(0, slot & ~3UL, dword); + + dword0 = dword[slot&3]; + + BUG_ON(lpar_rc != 0); + + return dword0; +} + +static void beat_lpar_hptab_clear(void) +{ + unsigned long size_bytes = 1UL << ppc64_pft_size; + unsigned long hpte_count = size_bytes >> 4; + int i; + unsigned long dummy0, dummy1; + + /* TODO: Use bulk call */ + for (i = 0; i < hpte_count; i++) + beat_write_htab_entry(0, i, 0, 0, -1UL, -1UL, &dummy0, &dummy1); +} + +/* + * NOTE: for updatepp ops we are fortunate that the linux "newpp" bits and + * the low 3 bits of flags happen to line up. So no transform is needed. + * We can probably optimize here and assume the high bits of newpp are + * already zero. For now I am paranoid. + */ +static long beat_lpar_hpte_updatepp(unsigned long slot, + unsigned long newpp, + unsigned long va, + int psize, int local) +{ + unsigned long lpar_rc; + unsigned long dummy0, dummy1, want_v; + unsigned long flags; + + want_v = hpte_encode_v(va, psize); + + DBG_LOW(" update: " + "avpnv=%016lx, slot=%016lx, psize: %d, newpp %016lx ... ", + want_v & HPTE_V_AVPN, slot, psize, newpp); + + spin_lock_irqsave(&beat_htab_lock, flags); + dummy0 = beat_lpar_hpte_getword0(slot); + if ((dummy0 & ~0x7FUL) != (want_v & ~0x7FUL)) { + DBG_LOW("not found !\n"); + spin_unlock_irqrestore(&beat_htab_lock, flags); + return -1; + } + + lpar_rc = beat_write_htab_entry(0, slot, 0, newpp, 0, 7, &dummy0, + &dummy1); + spin_unlock_irqrestore(&beat_htab_lock, flags); + if (lpar_rc != 0 || dummy0 == 0) { + DBG_LOW("not found !\n"); + return -1; + } + + DBG_LOW("ok %lx %lx\n", dummy0, dummy1); + + BUG_ON(lpar_rc != 0); + + return 0; +} + +static long beat_lpar_hpte_find(unsigned long va, int psize) +{ + unsigned long hash; + unsigned long i, j; + long slot; + unsigned long want_v, hpte_v; + + hash = hpt_hash(va, mmu_psize_defs[psize].shift); + want_v = hpte_encode_v(va, psize); + + for (j = 0; j < 2; j++) { + slot = (hash & htab_hash_mask) * HPTES_PER_GROUP; + for (i = 0; i < HPTES_PER_GROUP; i++) { + hpte_v = beat_lpar_hpte_getword0(slot); + + if (HPTE_V_COMPARE(hpte_v, want_v) + && (hpte_v & HPTE_V_VALID) + && (!!(hpte_v & HPTE_V_SECONDARY) == j)) { + /* HPTE matches */ + if (j) + slot = -slot; + return slot; + } + ++slot; + } + hash = ~hash; + } + + return -1; +} + +static void beat_lpar_hpte_updateboltedpp(unsigned long newpp, + unsigned long ea, + int psize) +{ + unsigned long lpar_rc, slot, vsid, va, dummy0, dummy1; + unsigned long flags; + + vsid = get_kernel_vsid(ea); + va = (vsid << 28) | (ea & 0x0fffffff); + + spin_lock_irqsave(&beat_htab_lock, flags); + slot = beat_lpar_hpte_find(va, psize); + BUG_ON(slot == -1); + + lpar_rc = beat_write_htab_entry(0, slot, 0, newpp, 0, 7, + &dummy0, &dummy1); + spin_unlock_irqrestore(&beat_htab_lock, flags); + + BUG_ON(lpar_rc != 0); +} + +static void beat_lpar_hpte_invalidate(unsigned long slot, unsigned long va, + int psize, int local) +{ + unsigned long want_v; + unsigned long lpar_rc; + unsigned long dummy1, dummy2; + unsigned long flags; + + DBG_LOW(" inval : slot=%lx, va=%016lx, psize: %d, local: %d\n", + slot, va, psize, local); + want_v = hpte_encode_v(va, psize); + + spin_lock_irqsave(&beat_htab_lock, flags); + dummy1 = beat_lpar_hpte_getword0(slot); + + if ((dummy1 & ~0x7FUL) != (want_v & ~0x7FUL)) { + DBG_LOW("not found !\n"); + spin_unlock_irqrestore(&beat_htab_lock, flags); + return; + } + + lpar_rc = beat_write_htab_entry(0, slot, 0, 0, HPTE_V_VALID, 0, + &dummy1, &dummy2); + spin_unlock_irqrestore(&beat_htab_lock, flags); + + BUG_ON(lpar_rc != 0); +} + +void __init hpte_init_beat(void) +{ + ppc_md.hpte_invalidate = beat_lpar_hpte_invalidate; + ppc_md.hpte_updatepp = beat_lpar_hpte_updatepp; + ppc_md.hpte_updateboltedpp = beat_lpar_hpte_updateboltedpp; + ppc_md.hpte_insert = beat_lpar_hpte_insert; + ppc_md.hpte_remove = beat_lpar_hpte_remove; + ppc_md.hpte_clear_all = beat_lpar_hptab_clear; +} -- cgit v1.2.3 From d7480a9feaa970d9c37462f21bc27ebab2c56b0b Mon Sep 17 00:00:00 2001 From: Ishizaki Kou Date: Fri, 2 Feb 2007 16:43:21 +0900 Subject: [POWERPC] Celleb: support udbg This patch adds udbg support for Celleb platform. Signed-off-by: Kou Ishizaki Acked-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/udbg.c | 2 + arch/powerpc/platforms/celleb/udbg_beat.c | 97 +++++++++++++++++++++++++++++++ 2 files changed, 99 insertions(+) create mode 100644 arch/powerpc/platforms/celleb/udbg_beat.c (limited to 'arch') diff --git a/arch/powerpc/kernel/udbg.c b/arch/powerpc/kernel/udbg.c index 5730906b23d5..e225a761dc2a 100644 --- a/arch/powerpc/kernel/udbg.c +++ b/arch/powerpc/kernel/udbg.c @@ -45,6 +45,8 @@ void __init udbg_early_init(void) #elif defined(CONFIG_PPC_EARLY_DEBUG_ISERIES) /* For iSeries - hit Ctrl-x Ctrl-x to see the output */ udbg_init_iseries(); +#elif defined(CONFIG_PPC_EARLY_DEBUG_BEAT) + udbg_init_debug_beat(); #endif } diff --git a/arch/powerpc/platforms/celleb/udbg_beat.c b/arch/powerpc/platforms/celleb/udbg_beat.c new file mode 100644 index 000000000000..d888c4674c62 --- /dev/null +++ b/arch/powerpc/platforms/celleb/udbg_beat.c @@ -0,0 +1,97 @@ +/* + * udbg function for Beat + * + * (C) Copyright 2006 TOSHIBA CORPORATION + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include +#include + +#include +#include +#include + +#include "beat.h" + +#define celleb_vtermno 0 + +static void udbg_putc_beat(char c) +{ + unsigned long rc; + + if (c == '\n') + udbg_putc_beat('\r'); + + rc = beat_put_term_char(celleb_vtermno, 1, (uint64_t)c << 56, 0); +} + +/* Buffered chars getc */ +static long inbuflen; +static long inbuf[2]; /* must be 2 longs */ + +static int udbg_getc_poll_beat(void) +{ + /* The interface is tricky because it may return up to 16 chars. + * We save them statically for future calls to udbg_getc(). + */ + char ch, *buf = (char *)inbuf; + int i; + long rc; + if (inbuflen == 0) { + /* get some more chars. */ + inbuflen = 0; + rc = beat_get_term_char(celleb_vtermno, &inbuflen, inbuf+0, inbuf+1); + if (rc != 0) + inbuflen = 0; /* otherwise inbuflen is garbage */ + } + if (inbuflen <= 0 || inbuflen > 16) { + /* Catch error case as well as other oddities (corruption) */ + inbuflen = 0; + return -1; + } + ch = buf[0]; + for (i = 1; i < inbuflen; i++) /* shuffle them down. */ + buf[i-1] = buf[i]; + inbuflen--; + return ch; +} + +static int udbg_getc_beat(void) +{ + int ch; + for (;;) { + ch = udbg_getc_poll_beat(); + if (ch == -1) { + /* This shouldn't be needed...but... */ + volatile unsigned long delay; + for (delay=0; delay < 2000000; delay++) + ; + } else { + return ch; + } + } +} + +/* call this from early_init() for a working debug console on + * vterm capable LPAR machines + */ +void __init udbg_init_debug_beat(void) +{ + udbg_putc = udbg_putc_beat; + udbg_getc = udbg_getc_beat; + udbg_getc_poll = udbg_getc_poll_beat; +} -- cgit v1.2.3 From c9868fe0e091f64241a372b45f08097c013e41b2 Mon Sep 17 00:00:00 2001 From: Ishizaki Kou Date: Fri, 2 Feb 2007 16:45:33 +0900 Subject: [POWERPC] Celleb: consolidate spu management ops Spu management ops in arch/platforms/cell/spu_priv1_mmio.h can be used commonly in of based platform. This patch separates spu management ops from native cell code and uses on celleb platform. Signed-off-by: Arnd Bergmann Signed-off-by: Kou Ishizaki Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/Makefile | 7 +- arch/powerpc/platforms/cell/spu_manage.c | 420 ++++++++++++++++++++++++++ arch/powerpc/platforms/cell/spu_priv1_mmio.c | 422 ++------------------------- 3 files changed, 448 insertions(+), 401 deletions(-) create mode 100644 arch/powerpc/platforms/cell/spu_manage.c (limited to 'arch') diff --git a/arch/powerpc/platforms/cell/Makefile b/arch/powerpc/platforms/cell/Makefile index f90e8337796c..869af89df6ff 100644 --- a/arch/powerpc/platforms/cell/Makefile +++ b/arch/powerpc/platforms/cell/Makefile @@ -14,7 +14,12 @@ endif spufs-modular-$(CONFIG_SPU_FS) += spu_syscalls.o spu-priv1-$(CONFIG_PPC_CELL_NATIVE) += spu_priv1_mmio.o +spu-manage-$(CONFIG_PPC_CELLEB) += spu_manage.o +spu-manage-$(CONFIG_PPC_CELL_NATIVE) += spu_manage.o + obj-$(CONFIG_SPU_BASE) += spu_callbacks.o spu_base.o \ spu_coredump.o \ $(spufs-modular-m) \ - $(spu-priv1-y) spufs/ + $(spu-priv1-y) \ + $(spu-manage-y) \ + spufs/ diff --git a/arch/powerpc/platforms/cell/spu_manage.c b/arch/powerpc/platforms/cell/spu_manage.c new file mode 100644 index 000000000000..d8b39fe39cdd --- /dev/null +++ b/arch/powerpc/platforms/cell/spu_manage.c @@ -0,0 +1,420 @@ +/* + * spu management operations for of based platforms + * + * (C) Copyright IBM Deutschland Entwicklung GmbH 2005 + * Copyright 2006 Sony Corp. + * (C) Copyright 2007 TOSHIBA CORPORATION + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "interrupt.h" + +struct device_node *spu_devnode(struct spu *spu) +{ + return spu->devnode; +} + +EXPORT_SYMBOL_GPL(spu_devnode); + +static u64 __init find_spu_unit_number(struct device_node *spe) +{ + const unsigned int *prop; + int proplen; + prop = get_property(spe, "unit-id", &proplen); + if (proplen == 4) + return (u64)*prop; + + prop = get_property(spe, "reg", &proplen); + if (proplen == 4) + return (u64)*prop; + + return 0; +} + +static int __init cell_spuprop_present(struct spu *spu, struct device_node *spe, + const char *prop) +{ + const struct address_prop { + unsigned long address; + unsigned int len; + } __attribute__((packed)) *p; + int proplen; + + unsigned long start_pfn, nr_pages; + struct pglist_data *pgdata; + struct zone *zone; + int ret; + + p = get_property(spe, prop, &proplen); + WARN_ON(proplen != sizeof (*p)); + + start_pfn = p->address >> PAGE_SHIFT; + nr_pages = ((unsigned long)p->len + PAGE_SIZE - 1) >> PAGE_SHIFT; + + pgdata = NODE_DATA(spu->node); + zone = pgdata->node_zones; + + ret = __add_pages(zone, start_pfn, nr_pages); + + return ret; +} + +static void __iomem * __init map_spe_prop(struct spu *spu, + struct device_node *n, const char *name) +{ + const struct address_prop { + unsigned long address; + unsigned int len; + } __attribute__((packed)) *prop; + + const void *p; + int proplen; + void __iomem *ret = NULL; + int err = 0; + + p = get_property(n, name, &proplen); + if (proplen != sizeof (struct address_prop)) + return NULL; + + prop = p; + + err = cell_spuprop_present(spu, n, name); + if (err && (err != -EEXIST)) + goto out; + + ret = ioremap(prop->address, prop->len); + + out: + return ret; +} + +static void spu_unmap(struct spu *spu) +{ + if (!firmware_has_feature(FW_FEATURE_LPAR)) + iounmap(spu->priv1); + iounmap(spu->priv2); + iounmap(spu->problem); + iounmap((__force u8 __iomem *)spu->local_store); +} + +static int __init spu_map_interrupts_old(struct spu *spu, + struct device_node *np) +{ + unsigned int isrc; + const u32 *tmp; + int nid; + + /* Get the interrupt source unit from the device-tree */ + tmp = get_property(np, "isrc", NULL); + if (!tmp) + return -ENODEV; + isrc = tmp[0]; + + tmp = get_property(np->parent->parent, "node-id", NULL); + if (!tmp) { + printk(KERN_WARNING "%s: can't find node-id\n", __FUNCTION__); + nid = spu->node; + } else + nid = tmp[0]; + + /* Add the node number */ + isrc |= nid << IIC_IRQ_NODE_SHIFT; + + /* Now map interrupts of all 3 classes */ + spu->irqs[0] = irq_create_mapping(NULL, IIC_IRQ_CLASS_0 | isrc); + spu->irqs[1] = irq_create_mapping(NULL, IIC_IRQ_CLASS_1 | isrc); + spu->irqs[2] = irq_create_mapping(NULL, IIC_IRQ_CLASS_2 | isrc); + + /* Right now, we only fail if class 2 failed */ + return spu->irqs[2] == NO_IRQ ? -EINVAL : 0; +} + +static int __init spu_map_device_old(struct spu *spu) +{ + struct device_node *node = spu->devnode; + const char *prop; + int ret; + + ret = -ENODEV; + spu->name = get_property(node, "name", NULL); + if (!spu->name) + goto out; + + prop = get_property(node, "local-store", NULL); + if (!prop) + goto out; + spu->local_store_phys = *(unsigned long *)prop; + + /* we use local store as ram, not io memory */ + spu->local_store = (void __force *) + map_spe_prop(spu, node, "local-store"); + if (!spu->local_store) + goto out; + + prop = get_property(node, "problem", NULL); + if (!prop) + goto out_unmap; + spu->problem_phys = *(unsigned long *)prop; + + spu->problem = map_spe_prop(spu, node, "problem"); + if (!spu->problem) + goto out_unmap; + + spu->priv2 = map_spe_prop(spu, node, "priv2"); + if (!spu->priv2) + goto out_unmap; + + if (!firmware_has_feature(FW_FEATURE_LPAR)) { + spu->priv1 = map_spe_prop(spu, node, "priv1"); + if (!spu->priv1) + goto out_unmap; + } + + ret = 0; + goto out; + +out_unmap: + spu_unmap(spu); +out: + return ret; +} + +static int __init spu_map_interrupts(struct spu *spu, struct device_node *np) +{ + struct of_irq oirq; + int ret; + int i; + + for (i=0; i < 3; i++) { + ret = of_irq_map_one(np, i, &oirq); + if (ret) { + pr_debug("spu_new: failed to get irq %d\n", i); + goto err; + } + ret = -EINVAL; + pr_debug(" irq %d no 0x%x on %s\n", i, oirq.specifier[0], + oirq.controller->full_name); + spu->irqs[i] = irq_create_of_mapping(oirq.controller, + oirq.specifier, oirq.size); + if (spu->irqs[i] == NO_IRQ) { + pr_debug("spu_new: failed to map it !\n"); + goto err; + } + } + return 0; + +err: + pr_debug("failed to map irq %x for spu %s\n", *oirq.specifier, + spu->name); + for (; i >= 0; i--) { + if (spu->irqs[i] != NO_IRQ) + irq_dispose_mapping(spu->irqs[i]); + } + return ret; +} + +static int spu_map_resource(struct spu *spu, int nr, + void __iomem** virt, unsigned long *phys) +{ + struct device_node *np = spu->devnode; + unsigned long start_pfn, nr_pages; + struct pglist_data *pgdata; + struct zone *zone; + struct resource resource = { }; + unsigned long len; + int ret; + + ret = of_address_to_resource(np, nr, &resource); + if (ret) + goto out; + + if (phys) + *phys = resource.start; + len = resource.end - resource.start + 1; + *virt = ioremap(resource.start, len); + if (!*virt) + ret = -EINVAL; + + start_pfn = resource.start >> PAGE_SHIFT; + nr_pages = (len + PAGE_SIZE - 1) >> PAGE_SHIFT; + + pgdata = NODE_DATA(spu->node); + zone = pgdata->node_zones; + + ret = __add_pages(zone, start_pfn, nr_pages); + +out: + return ret; +} + +static int __init spu_map_device(struct spu *spu) +{ + struct device_node *np = spu->devnode; + int ret = -ENODEV; + + spu->name = get_property(np, "name", NULL); + if (!spu->name) + goto out; + + ret = spu_map_resource(spu, 0, (void __iomem**)&spu->local_store, + &spu->local_store_phys); + if (ret) { + pr_debug("spu_new: failed to map %s resource 0\n", + np->full_name); + goto out; + } + ret = spu_map_resource(spu, 1, (void __iomem**)&spu->problem, + &spu->problem_phys); + if (ret) { + pr_debug("spu_new: failed to map %s resource 1\n", + np->full_name); + goto out_unmap; + } + ret = spu_map_resource(spu, 2, (void __iomem**)&spu->priv2, NULL); + if (ret) { + pr_debug("spu_new: failed to map %s resource 2\n", + np->full_name); + goto out_unmap; + } + if (!firmware_has_feature(FW_FEATURE_LPAR)) + ret = spu_map_resource(spu, 3, + (void __iomem**)&spu->priv1, NULL); + if (ret) { + pr_debug("spu_new: failed to map %s resource 3\n", + np->full_name); + goto out_unmap; + } + pr_debug("spu_new: %s maps:\n", np->full_name); + pr_debug(" local store : 0x%016lx -> 0x%p\n", + spu->local_store_phys, spu->local_store); + pr_debug(" problem state : 0x%016lx -> 0x%p\n", + spu->problem_phys, spu->problem); + pr_debug(" priv2 : 0x%p\n", spu->priv2); + pr_debug(" priv1 : 0x%p\n", spu->priv1); + + return 0; + +out_unmap: + spu_unmap(spu); +out: + pr_debug("failed to map spe %s: %d\n", spu->name, ret); + return ret; +} + +static int __init of_enumerate_spus(int (*fn)(void *data)) +{ + int ret; + struct device_node *node; + + ret = -ENODEV; + for (node = of_find_node_by_type(NULL, "spe"); + node; node = of_find_node_by_type(node, "spe")) { + ret = fn(node); + if (ret) { + printk(KERN_WARNING "%s: Error initializing %s\n", + __FUNCTION__, node->name); + break; + } + } + return ret; +} + +static int __init of_create_spu(struct spu *spu, void *data) +{ + int ret; + struct device_node *spe = (struct device_node *)data; + static int legacy_map = 0, legacy_irq = 0; + + spu->devnode = of_node_get(spe); + spu->spe_id = find_spu_unit_number(spe); + + spu->node = of_node_to_nid(spe); + if (spu->node >= MAX_NUMNODES) { + printk(KERN_WARNING "SPE %s on node %d ignored," + " node number too big\n", spe->full_name, spu->node); + printk(KERN_WARNING "Check if CONFIG_NUMA is enabled.\n"); + ret = -ENODEV; + goto out; + } + + ret = spu_map_device(spu); + if (ret) { + if (!legacy_map) { + legacy_map = 1; + printk(KERN_WARNING "%s: Legacy device tree found, " + "trying to map old style\n", __FUNCTION__); + } + ret = spu_map_device_old(spu); + if (ret) { + printk(KERN_ERR "Unable to map %s\n", + spu->name); + goto out; + } + } + + ret = spu_map_interrupts(spu, spe); + if (ret) { + if (!legacy_irq) { + legacy_irq = 1; + printk(KERN_WARNING "%s: Legacy device tree found, " + "trying old style irq\n", __FUNCTION__); + } + ret = spu_map_interrupts_old(spu, spe); + if (ret) { + printk(KERN_ERR "%s: could not map interrupts", + spu->name); + goto out_unmap; + } + } + + pr_debug("Using SPE %s %p %p %p %p %d\n", spu->name, + spu->local_store, spu->problem, spu->priv1, + spu->priv2, spu->number); + goto out; + +out_unmap: + spu_unmap(spu); +out: + return ret; +} + +static int of_destroy_spu(struct spu *spu) +{ + spu_unmap(spu); + of_node_put(spu->devnode); + return 0; +} + +const struct spu_management_ops spu_management_of_ops = { + .enumerate_spus = of_enumerate_spus, + .create_spu = of_create_spu, + .destroy_spu = of_destroy_spu, +}; diff --git a/arch/powerpc/platforms/cell/spu_priv1_mmio.c b/arch/powerpc/platforms/cell/spu_priv1_mmio.c index 910a926b61a2..67fa7247b80a 100644 --- a/arch/powerpc/platforms/cell/spu_priv1_mmio.c +++ b/arch/powerpc/platforms/cell/spu_priv1_mmio.c @@ -37,490 +37,112 @@ #include "interrupt.h" #include "spu_priv1_mmio.h" -static DEFINE_MUTEX(add_spumem_mutex); - -struct spu_pdata { - struct device_node *devnode; - struct spu_priv1 __iomem *priv1; -}; - -static struct spu_pdata *spu_get_pdata(struct spu *spu) -{ - BUG_ON(!spu->pdata); - return spu->pdata; -} - -struct device_node *spu_devnode(struct spu *spu) -{ - return spu_get_pdata(spu)->devnode; -} - -EXPORT_SYMBOL_GPL(spu_devnode); - -static int __init cell_spuprop_present(struct spu *spu, struct device_node *spe, - const char *prop) -{ - const struct address_prop { - unsigned long address; - unsigned int len; - } __attribute__((packed)) *p; - int proplen; - - unsigned long start_pfn, nr_pages; - struct pglist_data *pgdata; - struct zone *zone; - int ret; - - p = get_property(spe, prop, &proplen); - WARN_ON(proplen != sizeof (*p)); - - start_pfn = p->address >> PAGE_SHIFT; - nr_pages = ((unsigned long)p->len + PAGE_SIZE - 1) >> PAGE_SHIFT; - - pgdata = NODE_DATA(spu->node); - zone = pgdata->node_zones; - - /* XXX rethink locking here */ - mutex_lock(&add_spumem_mutex); - ret = __add_pages(zone, start_pfn, nr_pages); - mutex_unlock(&add_spumem_mutex); - - return ret; -} - -static void __iomem * __init map_spe_prop(struct spu *spu, - struct device_node *n, const char *name) -{ - const struct address_prop { - unsigned long address; - unsigned int len; - } __attribute__((packed)) *prop; - - const void *p; - int proplen; - void __iomem *ret = NULL; - int err = 0; - - p = get_property(n, name, &proplen); - if (proplen != sizeof (struct address_prop)) - return NULL; - - prop = p; - - err = cell_spuprop_present(spu, n, name); - if (err && (err != -EEXIST)) - goto out; - - ret = ioremap(prop->address, prop->len); - - out: - return ret; -} - -static void spu_unmap(struct spu *spu) -{ - iounmap(spu->priv2); - iounmap(spu_get_pdata(spu)->priv1); - iounmap(spu->problem); - iounmap((__force u8 __iomem *)spu->local_store); -} - -static int __init spu_map_interrupts_old(struct spu *spu, - struct device_node *np) -{ - unsigned int isrc; - const u32 *tmp; - int nid; - - /* Get the interrupt source unit from the device-tree */ - tmp = get_property(np, "isrc", NULL); - if (!tmp) - return -ENODEV; - isrc = tmp[0]; - - tmp = get_property(np->parent->parent, "node-id", NULL); - if (!tmp) { - printk(KERN_WARNING "%s: can't find node-id\n", __FUNCTION__); - nid = spu->node; - } else - nid = tmp[0]; - - /* Add the node number */ - isrc |= nid << IIC_IRQ_NODE_SHIFT; - - /* Now map interrupts of all 3 classes */ - spu->irqs[0] = irq_create_mapping(NULL, IIC_IRQ_CLASS_0 | isrc); - spu->irqs[1] = irq_create_mapping(NULL, IIC_IRQ_CLASS_1 | isrc); - spu->irqs[2] = irq_create_mapping(NULL, IIC_IRQ_CLASS_2 | isrc); - - /* Right now, we only fail if class 2 failed */ - return spu->irqs[2] == NO_IRQ ? -EINVAL : 0; -} - -static int __init spu_map_device_old(struct spu *spu, struct device_node *node) -{ - const char *prop; - int ret; - - ret = -ENODEV; - spu->name = get_property(node, "name", NULL); - if (!spu->name) - goto out; - - prop = get_property(node, "local-store", NULL); - if (!prop) - goto out; - spu->local_store_phys = *(unsigned long *)prop; - - /* we use local store as ram, not io memory */ - spu->local_store = (void __force *) - map_spe_prop(spu, node, "local-store"); - if (!spu->local_store) - goto out; - - prop = get_property(node, "problem", NULL); - if (!prop) - goto out_unmap; - spu->problem_phys = *(unsigned long *)prop; - - spu->problem= map_spe_prop(spu, node, "problem"); - if (!spu->problem) - goto out_unmap; - - spu_get_pdata(spu)->priv1= map_spe_prop(spu, node, "priv1"); - - spu->priv2= map_spe_prop(spu, node, "priv2"); - if (!spu->priv2) - goto out_unmap; - ret = 0; - goto out; - -out_unmap: - spu_unmap(spu); -out: - return ret; -} - -static int __init spu_map_interrupts(struct spu *spu, struct device_node *np) -{ - struct of_irq oirq; - int ret; - int i; - - for (i=0; i < 3; i++) { - ret = of_irq_map_one(np, i, &oirq); - if (ret) { - pr_debug("spu_new: failed to get irq %d\n", i); - goto err; - } - ret = -EINVAL; - pr_debug(" irq %d no 0x%x on %s\n", i, oirq.specifier[0], - oirq.controller->full_name); - spu->irqs[i] = irq_create_of_mapping(oirq.controller, - oirq.specifier, oirq.size); - if (spu->irqs[i] == NO_IRQ) { - pr_debug("spu_new: failed to map it !\n"); - goto err; - } - } - return 0; - -err: - pr_debug("failed to map irq %x for spu %s\n", *oirq.specifier, - spu->name); - for (; i >= 0; i--) { - if (spu->irqs[i] != NO_IRQ) - irq_dispose_mapping(spu->irqs[i]); - } - return ret; -} - -static int spu_map_resource(struct spu *spu, int nr, - void __iomem** virt, unsigned long *phys) -{ - struct device_node *np = spu_get_pdata(spu)->devnode; - unsigned long start_pfn, nr_pages; - struct pglist_data *pgdata; - struct zone *zone; - struct resource resource = { }; - unsigned long len; - int ret; - - ret = of_address_to_resource(np, nr, &resource); - if (ret) - goto out; - - if (phys) - *phys = resource.start; - len = resource.end - resource.start + 1; - *virt = ioremap(resource.start, len); - if (!*virt) - ret = -EINVAL; - - start_pfn = resource.start >> PAGE_SHIFT; - nr_pages = (len + PAGE_SIZE - 1) >> PAGE_SHIFT; - - pgdata = NODE_DATA(spu->node); - zone = pgdata->node_zones; - - /* XXX rethink locking here */ - mutex_lock(&add_spumem_mutex); - ret = __add_pages(zone, start_pfn, nr_pages); - mutex_unlock(&add_spumem_mutex); - -out: - return ret; -} - -static int __init spu_map_device(struct spu *spu) -{ - struct device_node *np = spu_get_pdata(spu)->devnode; - int ret = -ENODEV; - - spu->name = get_property(np, "name", NULL); - if (!spu->name) - goto out; - - ret = spu_map_resource(spu, 0, (void __iomem**)&spu->local_store, - &spu->local_store_phys); - if (ret) { - pr_debug("spu_new: failed to map %s resource 0\n", - np->full_name); - goto out; - } - ret = spu_map_resource(spu, 1, (void __iomem**)&spu->problem, - &spu->problem_phys); - if (ret) { - pr_debug("spu_new: failed to map %s resource 1\n", - np->full_name); - goto out_unmap; - } - ret = spu_map_resource(spu, 2, (void __iomem**)&spu->priv2, NULL); - if (ret) { - pr_debug("spu_new: failed to map %s resource 2\n", - np->full_name); - goto out_unmap; - } - if (!firmware_has_feature(FW_FEATURE_LPAR)) - ret = spu_map_resource(spu, 3, - (void __iomem**)&spu_get_pdata(spu)->priv1, NULL); - if (ret) { - pr_debug("spu_new: failed to map %s resource 3\n", - np->full_name); - goto out_unmap; - } - pr_debug("spu_new: %s maps:\n", np->full_name); - pr_debug(" local store : 0x%016lx -> 0x%p\n", - spu->local_store_phys, spu->local_store); - pr_debug(" problem state : 0x%016lx -> 0x%p\n", - spu->problem_phys, spu->problem); - pr_debug(" priv2 : 0x%p\n", spu->priv2); - pr_debug(" priv1 : 0x%p\n", - spu_get_pdata(spu)->priv1); - - return 0; - -out_unmap: - spu_unmap(spu); -out: - pr_debug("failed to map spe %s: %d\n", spu->name, ret); - return ret; -} - -static int __init of_enumerate_spus(int (*fn)(void *data)) -{ - int ret; - struct device_node *node; - - ret = -ENODEV; - for (node = of_find_node_by_type(NULL, "spe"); - node; node = of_find_node_by_type(node, "spe")) { - ret = fn(node); - if (ret) { - printk(KERN_WARNING "%s: Error initializing %s\n", - __FUNCTION__, node->name); - break; - } - } - return ret; -} - -static int __init of_create_spu(struct spu *spu, void *data) -{ - int ret; - struct device_node *spe = (struct device_node *)data; - - spu->pdata = kzalloc(sizeof(struct spu_pdata), - GFP_KERNEL); - if (!spu->pdata) { - ret = -ENOMEM; - goto out; - } - spu_get_pdata(spu)->devnode = of_node_get(spe); - - spu->node = of_node_to_nid(spe); - if (spu->node >= MAX_NUMNODES) { - printk(KERN_WARNING "SPE %s on node %d ignored," - " node number too big\n", spe->full_name, spu->node); - printk(KERN_WARNING "Check if CONFIG_NUMA is enabled.\n"); - ret = -ENODEV; - goto out_free; - } - - ret = spu_map_device(spu); - /* try old method */ - if (ret) - ret = spu_map_device_old(spu, spe); - if (ret) - goto out_free; - - ret = spu_map_interrupts(spu, spe); - if (ret) - ret = spu_map_interrupts_old(spu, spe); - if (ret) - goto out_unmap; - - pr_debug(KERN_DEBUG "Using SPE %s %p %p %p %p %d\n", spu->name, - spu->local_store, spu->problem, spu_get_pdata(spu)->priv1, - spu->priv2, spu->number); - goto out; - -out_unmap: - spu_unmap(spu); -out_free: - kfree(spu->pdata); - spu->pdata = NULL; -out: - return ret; -} - -static int of_destroy_spu(struct spu *spu) -{ - spu_unmap(spu); - of_node_put(spu_get_pdata(spu)->devnode); - kfree(spu->pdata); - spu->pdata = NULL; - return 0; -} - -const struct spu_management_ops spu_management_of_ops = { - .enumerate_spus = of_enumerate_spus, - .create_spu = of_create_spu, - .destroy_spu = of_destroy_spu, -}; - static void int_mask_and(struct spu *spu, int class, u64 mask) { u64 old_mask; - old_mask = in_be64(&spu_get_pdata(spu)->priv1->int_mask_RW[class]); - out_be64(&spu_get_pdata(spu)->priv1->int_mask_RW[class], - old_mask & mask); + old_mask = in_be64(&spu->priv1->int_mask_RW[class]); + out_be64(&spu->priv1->int_mask_RW[class], old_mask & mask); } static void int_mask_or(struct spu *spu, int class, u64 mask) { u64 old_mask; - old_mask = in_be64(&spu_get_pdata(spu)->priv1->int_mask_RW[class]); - out_be64(&spu_get_pdata(spu)->priv1->int_mask_RW[class], - old_mask | mask); + old_mask = in_be64(&spu->priv1->int_mask_RW[class]); + out_be64(&spu->priv1->int_mask_RW[class], old_mask | mask); } static void int_mask_set(struct spu *spu, int class, u64 mask) { - out_be64(&spu_get_pdata(spu)->priv1->int_mask_RW[class], mask); + out_be64(&spu->priv1->int_mask_RW[class], mask); } static u64 int_mask_get(struct spu *spu, int class) { - return in_be64(&spu_get_pdata(spu)->priv1->int_mask_RW[class]); + return in_be64(&spu->priv1->int_mask_RW[class]); } static void int_stat_clear(struct spu *spu, int class, u64 stat) { - out_be64(&spu_get_pdata(spu)->priv1->int_stat_RW[class], stat); + out_be64(&spu->priv1->int_stat_RW[class], stat); } static u64 int_stat_get(struct spu *spu, int class) { - return in_be64(&spu_get_pdata(spu)->priv1->int_stat_RW[class]); + return in_be64(&spu->priv1->int_stat_RW[class]); } static void cpu_affinity_set(struct spu *spu, int cpu) { u64 target = iic_get_target_id(cpu); u64 route = target << 48 | target << 32 | target << 16; - out_be64(&spu_get_pdata(spu)->priv1->int_route_RW, route); + out_be64(&spu->priv1->int_route_RW, route); } static u64 mfc_dar_get(struct spu *spu) { - return in_be64(&spu_get_pdata(spu)->priv1->mfc_dar_RW); + return in_be64(&spu->priv1->mfc_dar_RW); } static u64 mfc_dsisr_get(struct spu *spu) { - return in_be64(&spu_get_pdata(spu)->priv1->mfc_dsisr_RW); + return in_be64(&spu->priv1->mfc_dsisr_RW); } static void mfc_dsisr_set(struct spu *spu, u64 dsisr) { - out_be64(&spu_get_pdata(spu)->priv1->mfc_dsisr_RW, dsisr); + out_be64(&spu->priv1->mfc_dsisr_RW, dsisr); } static void mfc_sdr_setup(struct spu *spu) { - out_be64(&spu_get_pdata(spu)->priv1->mfc_sdr_RW, mfspr(SPRN_SDR1)); + out_be64(&spu->priv1->mfc_sdr_RW, mfspr(SPRN_SDR1)); } static void mfc_sr1_set(struct spu *spu, u64 sr1) { - out_be64(&spu_get_pdata(spu)->priv1->mfc_sr1_RW, sr1); + out_be64(&spu->priv1->mfc_sr1_RW, sr1); } static u64 mfc_sr1_get(struct spu *spu) { - return in_be64(&spu_get_pdata(spu)->priv1->mfc_sr1_RW); + return in_be64(&spu->priv1->mfc_sr1_RW); } static void mfc_tclass_id_set(struct spu *spu, u64 tclass_id) { - out_be64(&spu_get_pdata(spu)->priv1->mfc_tclass_id_RW, tclass_id); + out_be64(&spu->priv1->mfc_tclass_id_RW, tclass_id); } static u64 mfc_tclass_id_get(struct spu *spu) { - return in_be64(&spu_get_pdata(spu)->priv1->mfc_tclass_id_RW); + return in_be64(&spu->priv1->mfc_tclass_id_RW); } static void tlb_invalidate(struct spu *spu) { - out_be64(&spu_get_pdata(spu)->priv1->tlb_invalidate_entry_W, 0ul); + out_be64(&spu->priv1->tlb_invalidate_entry_W, 0ul); } static void resource_allocation_groupID_set(struct spu *spu, u64 id) { - out_be64(&spu_get_pdata(spu)->priv1->resource_allocation_groupID_RW, - id); + out_be64(&spu->priv1->resource_allocation_groupID_RW, id); } static u64 resource_allocation_groupID_get(struct spu *spu) { - return in_be64( - &spu_get_pdata(spu)->priv1->resource_allocation_groupID_RW); + return in_be64(&spu->priv1->resource_allocation_groupID_RW); } static void resource_allocation_enable_set(struct spu *spu, u64 enable) { - out_be64(&spu_get_pdata(spu)->priv1->resource_allocation_enable_RW, - enable); + out_be64(&spu->priv1->resource_allocation_enable_RW, enable); } static u64 resource_allocation_enable_get(struct spu *spu) { - return in_be64( - &spu_get_pdata(spu)->priv1->resource_allocation_enable_RW); + return in_be64(&spu->priv1->resource_allocation_enable_RW); } const struct spu_priv1_ops spu_priv1_mmio_ops = -- cgit v1.2.3 From e107931956f8327637508b91a9ddd4ba35be289d Mon Sep 17 00:00:00 2001 From: Ishizaki Kou Date: Fri, 2 Feb 2007 16:46:22 +0900 Subject: [POWERPC] Celleb: support spu priv1 ops SPU support routines for Celleb platform. Signed-off-by: Kou Ishizaki Acked-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/celleb/spu_priv1.c | 208 ++++++++++++++++++++++++++++++ 1 file changed, 208 insertions(+) create mode 100644 arch/powerpc/platforms/celleb/spu_priv1.c (limited to 'arch') diff --git a/arch/powerpc/platforms/celleb/spu_priv1.c b/arch/powerpc/platforms/celleb/spu_priv1.c new file mode 100644 index 000000000000..2bf6700f747a --- /dev/null +++ b/arch/powerpc/platforms/celleb/spu_priv1.c @@ -0,0 +1,208 @@ +/* + * spu hypervisor abstraction for Beat + * + * (C) Copyright 2006-2007 TOSHIBA CORPORATION + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include + +#include +#include +#include + +#include "beat_wrapper.h" + +static inline void _int_mask_set(struct spu *spu, int class, u64 mask) +{ + spu->shadow_int_mask_RW[class] = mask; + beat_set_irq_mask_for_spe(spu->spe_id, class, mask); +} + +static inline u64 _int_mask_get(struct spu *spu, int class) +{ + return spu->shadow_int_mask_RW[class]; +} + +static void int_mask_set(struct spu *spu, int class, u64 mask) +{ + _int_mask_set(spu, class, mask); +} + +static u64 int_mask_get(struct spu *spu, int class) +{ + return _int_mask_get(spu, class); +} + +static void int_mask_and(struct spu *spu, int class, u64 mask) +{ + u64 old_mask; + old_mask = _int_mask_get(spu, class); + _int_mask_set(spu, class, old_mask & mask); +} + +static void int_mask_or(struct spu *spu, int class, u64 mask) +{ + u64 old_mask; + old_mask = _int_mask_get(spu, class); + _int_mask_set(spu, class, old_mask | mask); +} + +static void int_stat_clear(struct spu *spu, int class, u64 stat) +{ + beat_clear_interrupt_status_of_spe(spu->spe_id, class, stat); +} + +static u64 int_stat_get(struct spu *spu, int class) +{ + u64 int_stat; + beat_get_interrupt_status_of_spe(spu->spe_id, class, &int_stat); + return int_stat; +} + +static void cpu_affinity_set(struct spu *spu, int cpu) +{ + return; +} + +static u64 mfc_dar_get(struct spu *spu) +{ + u64 dar; + beat_get_spe_privileged_state_1_registers( + spu->spe_id, + offsetof(struct spu_priv1, mfc_dar_RW), &dar); + return dar; +} + +static u64 mfc_dsisr_get(struct spu *spu) +{ + u64 dsisr; + beat_get_spe_privileged_state_1_registers( + spu->spe_id, + offsetof(struct spu_priv1, mfc_dsisr_RW), &dsisr); + return dsisr; +} + +static void mfc_dsisr_set(struct spu *spu, u64 dsisr) +{ + beat_set_spe_privileged_state_1_registers( + spu->spe_id, + offsetof(struct spu_priv1, mfc_dsisr_RW), dsisr); +} + +static void mfc_sdr_setup(struct spu *spu) +{ + return; +} + +static void mfc_sr1_set(struct spu *spu, u64 sr1) +{ + beat_set_spe_privileged_state_1_registers( + spu->spe_id, + offsetof(struct spu_priv1, mfc_sr1_RW), sr1); +} + +static u64 mfc_sr1_get(struct spu *spu) +{ + u64 sr1; + beat_get_spe_privileged_state_1_registers( + spu->spe_id, + offsetof(struct spu_priv1, mfc_sr1_RW), &sr1); + return sr1; +} + +static void mfc_tclass_id_set(struct spu *spu, u64 tclass_id) +{ + beat_set_spe_privileged_state_1_registers( + spu->spe_id, + offsetof(struct spu_priv1, mfc_tclass_id_RW), tclass_id); +} + +static u64 mfc_tclass_id_get(struct spu *spu) +{ + u64 tclass_id; + beat_get_spe_privileged_state_1_registers( + spu->spe_id, + offsetof(struct spu_priv1, mfc_tclass_id_RW), &tclass_id); + return tclass_id; +} + +static void tlb_invalidate(struct spu *spu) +{ + beat_set_spe_privileged_state_1_registers( + spu->spe_id, + offsetof(struct spu_priv1, tlb_invalidate_entry_W), 0ul); +} + +static void resource_allocation_groupID_set(struct spu *spu, u64 id) +{ + beat_set_spe_privileged_state_1_registers( + spu->spe_id, + offsetof(struct spu_priv1, resource_allocation_groupID_RW), + id); +} + +static u64 resource_allocation_groupID_get(struct spu *spu) +{ + u64 id; + beat_get_spe_privileged_state_1_registers( + spu->spe_id, + offsetof(struct spu_priv1, resource_allocation_groupID_RW), + &id); + return id; +} + +static void resource_allocation_enable_set(struct spu *spu, u64 enable) +{ + beat_set_spe_privileged_state_1_registers( + spu->spe_id, + offsetof(struct spu_priv1, resource_allocation_enable_RW), + enable); +} + +static u64 resource_allocation_enable_get(struct spu *spu) +{ + u64 enable; + beat_get_spe_privileged_state_1_registers( + spu->spe_id, + offsetof(struct spu_priv1, resource_allocation_enable_RW), + &enable); + return enable; +} + +const struct spu_priv1_ops spu_priv1_beat_ops = +{ + .int_mask_and = int_mask_and, + .int_mask_or = int_mask_or, + .int_mask_set = int_mask_set, + .int_mask_get = int_mask_get, + .int_stat_clear = int_stat_clear, + .int_stat_get = int_stat_get, + .cpu_affinity_set = cpu_affinity_set, + .mfc_dar_get = mfc_dar_get, + .mfc_dsisr_get = mfc_dsisr_get, + .mfc_dsisr_set = mfc_dsisr_set, + .mfc_sdr_setup = mfc_sdr_setup, + .mfc_sr1_set = mfc_sr1_set, + .mfc_sr1_get = mfc_sr1_get, + .mfc_tclass_id_set = mfc_tclass_id_set, + .mfc_tclass_id_get = mfc_tclass_id_get, + .tlb_invalidate = tlb_invalidate, + .resource_allocation_groupID_set = resource_allocation_groupID_set, + .resource_allocation_groupID_get = resource_allocation_groupID_get, + .resource_allocation_enable_set = resource_allocation_enable_set, + .resource_allocation_enable_get = resource_allocation_enable_get, +}; -- cgit v1.2.3 From c347b7989e4d9e1c23cb5cfba78c63c031b7dcee Mon Sep 17 00:00:00 2001 From: Ishizaki Kou Date: Fri, 2 Feb 2007 16:47:17 +0900 Subject: [POWERPC] Celleb: basic support This patch adds base support for Celleb platform. Signed-off-by: Kou Ishizaki Acked-by: Arnd Bergmann Acked-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/Kconfig | 15 +++ arch/powerpc/Kconfig.debug | 7 ++ arch/powerpc/boot/Makefile | 1 + arch/powerpc/platforms/Makefile | 1 + arch/powerpc/platforms/celleb/Makefile | 9 ++ arch/powerpc/platforms/celleb/beat.c | 163 ++++++++++++++++++++++++++++ arch/powerpc/platforms/celleb/beat.h | 40 +++++++ arch/powerpc/platforms/celleb/setup.c | 191 +++++++++++++++++++++++++++++++++ arch/powerpc/platforms/celleb/smp.c | 124 +++++++++++++++++++++ 9 files changed, 551 insertions(+) create mode 100644 arch/powerpc/platforms/celleb/Makefile create mode 100644 arch/powerpc/platforms/celleb/beat.c create mode 100644 arch/powerpc/platforms/celleb/beat.h create mode 100644 arch/powerpc/platforms/celleb/setup.c create mode 100644 arch/powerpc/platforms/celleb/smp.c (limited to 'arch') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index ce431b4446f0..50bb5067d86e 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -539,6 +539,16 @@ config PPC_PS3 This option enables support for the Sony PS3 game console and other platforms using the PS3 hypervisor. +config PPC_CELLEB + bool "Toshiba's Cell Reference Set 'Celleb' Architecture" + depends on PPC_MULTIPLATFORM && PPC64 + select PPC_CELL + select PPC_OF_PLATFORM_PCI + select HAS_TXX9_SERIAL + select PPC_UDBG_BEAT + select USB_OHCI_BIG_ENDIAN_MMIO + select USB_EHCI_BIG_ENDIAN_MMIO + config PPC_NATIVE bool depends on PPC_MULTIPLATFORM @@ -552,6 +562,11 @@ config UDBG_RTAS_CONSOLE depends on PPC_RTAS default n +config PPC_UDBG_BEAT + bool "BEAT based debug console" + depends on PPC_CELLEB + default n + config XICS depends on PPC_PSERIES bool diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug index 6cb57e0e6b77..2bbeb1b19950 100644 --- a/arch/powerpc/Kconfig.debug +++ b/arch/powerpc/Kconfig.debug @@ -185,6 +185,13 @@ config PPC_EARLY_DEBUG_ISERIES Select this to enable early debugging for legacy iSeries. You need to hit "Ctrl-x Ctrl-x" to see the messages on the console. +config PPC_EARLY_DEBUG_BEAT + bool "Beat HV Console" + depends on PPC_CELLEB + select PPC_UDBG_BEAT + help + Select this to enable early debugging for Celleb with Beat. + endchoice endmenu diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index 98392fb5f581..dc779407de14 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -162,6 +162,7 @@ image-$(CONFIG_PPC_PSERIES) += zImage.pseries image-$(CONFIG_PPC_MAPLE) += zImage.pseries image-$(CONFIG_PPC_IBM_CELL_BLADE) += zImage.pseries image-$(CONFIG_PPC_PS3) += zImage.ps3 +image-$(CONFIG_PPC_CELLEB) += zImage.pseries image-$(CONFIG_PPC_CHRP) += zImage.chrp image-$(CONFIG_PPC_EFIKA) += zImage.chrp image-$(CONFIG_PPC_PMAC) += zImage.pmac diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile index f164005c66b9..65e612315b9b 100644 --- a/arch/powerpc/platforms/Makefile +++ b/arch/powerpc/platforms/Makefile @@ -19,4 +19,5 @@ obj-$(CONFIG_PPC_MAPLE) += maple/ obj-$(CONFIG_PPC_PASEMI) += pasemi/ obj-$(CONFIG_PPC_CELL) += cell/ obj-$(CONFIG_PPC_PS3) += ps3/ +obj-$(CONFIG_PPC_CELLEB) += celleb/ obj-$(CONFIG_EMBEDDED6xx) += embedded6xx/ diff --git a/arch/powerpc/platforms/celleb/Makefile b/arch/powerpc/platforms/celleb/Makefile new file mode 100644 index 000000000000..3baf658ac543 --- /dev/null +++ b/arch/powerpc/platforms/celleb/Makefile @@ -0,0 +1,9 @@ +obj-y += interrupt.o iommu.o setup.o \ + htab.o beat.o pci.o \ + scc_epci.o hvCall.o + +obj-$(CONFIG_SMP) += smp.o +obj-$(CONFIG_PPC_UDBG_BEAT) += udbg_beat.o +obj-$(CONFIG_USB) += scc_uhc.o +obj-$(CONFIG_HAS_TXX9_SERIAL) += scc_sio.o +obj-$(CONFIG_SPU_BASE) += spu_priv1.o diff --git a/arch/powerpc/platforms/celleb/beat.c b/arch/powerpc/platforms/celleb/beat.c new file mode 100644 index 000000000000..99341ce8a697 --- /dev/null +++ b/arch/powerpc/platforms/celleb/beat.c @@ -0,0 +1,163 @@ +/* + * Simple routines for Celleb/Beat + * + * (C) Copyright 2006-2007 TOSHIBA CORPORATION + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include +#include +#include +#include + +#include +#include + +#include "beat_wrapper.h" +#include "beat.h" + +void beat_restart(char *cmd) +{ + beat_shutdown_logical_partition(1); +} + +void beat_power_off(void) +{ + beat_shutdown_logical_partition(0); +} + +u64 beat_halt_code = 0x1000000000000000UL; + +void beat_halt(void) +{ + beat_shutdown_logical_partition(beat_halt_code); +} + +int beat_set_rtc_time(struct rtc_time *rtc_time) +{ + u64 tim; + tim = mktime(rtc_time->tm_year+1900, + rtc_time->tm_mon+1, rtc_time->tm_mday, + rtc_time->tm_hour, rtc_time->tm_min, rtc_time->tm_sec); + if (beat_rtc_write(tim)) + return -1; + return 0; +} + +void beat_get_rtc_time(struct rtc_time *rtc_time) +{ + u64 tim; + + if (beat_rtc_read(&tim)) + tim = 0; + to_tm(tim, rtc_time); + rtc_time->tm_year -= 1900; + rtc_time->tm_mon -= 1; +} + +#define BEAT_NVRAM_SIZE 4096 + +ssize_t beat_nvram_read(char *buf, size_t count, loff_t *index) +{ + unsigned int i; + unsigned long len; + char *p = buf; + + if (*index >= BEAT_NVRAM_SIZE) + return -ENODEV; + i = *index; + if (i + count > BEAT_NVRAM_SIZE) + count = BEAT_NVRAM_SIZE - i; + + for (; count != 0; count -= len) { + len = count; + if (len > BEAT_NVRW_CNT) + len = BEAT_NVRW_CNT; + if (beat_eeprom_read(i, len, p)) { + return -EIO; + } + + p += len; + i += len; + } + *index = i; + return p - buf; +} + +ssize_t beat_nvram_write(char *buf, size_t count, loff_t *index) +{ + unsigned int i; + unsigned long len; + char *p = buf; + + if (*index >= BEAT_NVRAM_SIZE) + return -ENODEV; + i = *index; + if (i + count > BEAT_NVRAM_SIZE) + count = BEAT_NVRAM_SIZE - i; + + for (; count != 0; count -= len) { + len = count; + if (len > BEAT_NVRW_CNT) + len = BEAT_NVRW_CNT; + if (beat_eeprom_write(i, len, p)) { + return -EIO; + } + + p += len; + i += len; + } + *index = i; + return p - buf; +} + +ssize_t beat_nvram_get_size(void) +{ + return BEAT_NVRAM_SIZE; +} + +int beat_set_xdabr(unsigned long dabr) +{ + if (beat_set_dabr(dabr, DABRX_KERNEL | DABRX_USER)) + return -1; + return 0; +} + +int64_t beat_get_term_char(u64 vterm, u64 *len, u64 *t1, u64 *t2) +{ + u64 db[2]; + s64 ret; + + ret = beat_get_characters_from_console(vterm, len, (u8*)db); + if (ret == 0) { + *t1 = db[0]; + *t2 = db[1]; + } + return ret; +} + +int64_t beat_put_term_char(u64 vterm, u64 len, u64 t1, u64 t2) +{ + u64 db[2]; + + db[0] = t1; + db[1] = t2; + return beat_put_characters_to_console(vterm, len, (u8*)db); +} + +EXPORT_SYMBOL(beat_get_term_char); +EXPORT_SYMBOL(beat_put_term_char); +EXPORT_SYMBOL(beat_halt_code); diff --git a/arch/powerpc/platforms/celleb/beat.h b/arch/powerpc/platforms/celleb/beat.h new file mode 100644 index 000000000000..2b16bf3bee89 --- /dev/null +++ b/arch/powerpc/platforms/celleb/beat.h @@ -0,0 +1,40 @@ +/* + * Guest OS Interfaces. + * + * (C) Copyright 2006 TOSHIBA CORPORATION + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef _CELLEB_BEAT_H +#define _CELLEB_BEAT_H + +#define DABRX_KERNEL (1UL<<1) +#define DABRX_USER (1UL<<0) + +int64_t beat_get_term_char(uint64_t,uint64_t*,uint64_t*,uint64_t*); +int64_t beat_put_term_char(uint64_t,uint64_t,uint64_t,uint64_t); +int64_t beat_repository_encode(int, const char *, uint64_t[4]); +void beat_restart(char *); +void beat_power_off(void); +void beat_halt(void); +int beat_set_rtc_time(struct rtc_time *); +void beat_get_rtc_time(struct rtc_time *); +ssize_t beat_nvram_get_size(void); +ssize_t beat_nvram_read(char *, size_t, loff_t *); +ssize_t beat_nvram_write(char *, size_t, loff_t *); +int beat_set_xdabr(unsigned long); + +#endif /* _CELLEB_BEAT_H */ diff --git a/arch/powerpc/platforms/celleb/setup.c b/arch/powerpc/platforms/celleb/setup.c new file mode 100644 index 000000000000..1de63acfda87 --- /dev/null +++ b/arch/powerpc/platforms/celleb/setup.c @@ -0,0 +1,191 @@ +/* + * Celleb setup code + * + * (C) Copyright 2006-2007 TOSHIBA CORPORATION + * + * This code is based on arch/powerpc/platforms/cell/setup.c: + * Copyright (C) 1995 Linus Torvalds + * Adapted from 'alpha' version by Gary Thomas + * Modified by Cort Dougan (cort@cs.nmt.edu) + * Modified by PPC64 Team, IBM Corp + * Modified by Cell Team, IBM Deutschland Entwicklung GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#undef DEBUG + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "interrupt.h" +#include "beat_wrapper.h" +#include "beat.h" +#include "pci.h" + +static char celleb_machine_type[128] = "Celleb"; + +static void celleb_show_cpuinfo(struct seq_file *m) +{ + struct device_node *root; + const char *model = ""; + + root = of_find_node_by_path("/"); + if (root) + model = get_property(root, "model", NULL); + /* using "CHRP" is to trick anaconda into installing FCx into Celleb */ + seq_printf(m, "machine\t\t: %s %s\n", celleb_machine_type, model); + of_node_put(root); +} + +static int celleb_machine_type_hack(char *ptr) +{ + strncpy(celleb_machine_type, ptr, sizeof(celleb_machine_type)); + celleb_machine_type[sizeof(celleb_machine_type)-1] = 0; + return 0; +} + +__setup("celleb_machine_type_hack", celleb_machine_type_hack); + +static void celleb_progress(char *s, unsigned short hex) +{ + printk("*** %04x : %s\n", hex, s ? s : ""); +} + +static void __init celleb_setup_arch(void) +{ +#ifdef CONFIG_SPU_BASE + spu_priv1_ops = &spu_priv1_beat_ops; + spu_management_ops = &spu_management_of_ops; +#endif + +#ifdef CONFIG_SMP + smp_init_celleb(); +#endif + + /* init to some ~sane value until calibrate_delay() runs */ + loops_per_jiffy = 50000000; + + if (ROOT_DEV == 0) { + printk("No ramdisk, default root is /dev/hda2\n"); + ROOT_DEV = Root_HDA2; + } + +#ifdef CONFIG_DUMMY_CONSOLE + conswitchp = &dummy_con; +#endif +} + +static void beat_power_save(void) +{ + beat_pause(0); +} + +static int __init celleb_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + if (!of_flat_dt_is_compatible(root, "Beat")) + return 0; + + powerpc_firmware_features |= FW_FEATURE_CELLEB_POSSIBLE; + hpte_init_beat(); + return 1; +} + +/* + * Cell has no legacy IO; anything calling this function has to + * fail or bad things will happen + */ +static int celleb_check_legacy_ioport(unsigned int baseport) +{ + return -ENODEV; +} + +static void celleb_kexec_cpu_down(int crash, int secondary) +{ + beatic_deinit_IRQ(); +} + +static struct of_device_id celleb_bus_ids[] = { + { .type = "scc", }, + { .type = "ioif", }, /* old style */ + {}, +}; + +static int __init celleb_publish_devices(void) +{ + if (!machine_is(celleb)) + return 0; + + /* Publish OF platform devices for southbridge IOs */ + of_platform_bus_probe(NULL, celleb_bus_ids, NULL); + + return 0; +} +device_initcall(celleb_publish_devices); + +define_machine(celleb) { + .name = "Cell Reference Set", + .probe = celleb_probe, + .setup_arch = celleb_setup_arch, + .show_cpuinfo = celleb_show_cpuinfo, + .restart = beat_restart, + .power_off = beat_power_off, + .halt = beat_halt, + .get_rtc_time = beat_get_rtc_time, + .set_rtc_time = beat_set_rtc_time, + .calibrate_decr = generic_calibrate_decr, + .check_legacy_ioport = celleb_check_legacy_ioport, + .progress = celleb_progress, + .power_save = beat_power_save, + .nvram_size = beat_nvram_get_size, + .nvram_read = beat_nvram_read, + .nvram_write = beat_nvram_write, + .set_dabr = beat_set_xdabr, + .init_IRQ = beatic_init_IRQ, + .get_irq = beatic_get_irq, + .pci_probe_mode = celleb_pci_probe_mode, + .pci_setup_phb = celleb_setup_phb, +#ifdef CONFIG_KEXEC + .kexec_cpu_down = celleb_kexec_cpu_down, + .machine_kexec = default_machine_kexec, + .machine_kexec_prepare = default_machine_kexec_prepare, + .machine_crash_shutdown = default_machine_crash_shutdown, +#endif +}; diff --git a/arch/powerpc/platforms/celleb/smp.c b/arch/powerpc/platforms/celleb/smp.c new file mode 100644 index 000000000000..a7631250aeb4 --- /dev/null +++ b/arch/powerpc/platforms/celleb/smp.c @@ -0,0 +1,124 @@ +/* + * SMP support for Celleb platform. (Incomplete) + * + * (C) Copyright 2006 TOSHIBA CORPORATION + * + * This code is based on arch/powerpc/platforms/cell/smp.c: + * Dave Engebretsen, Peter Bergner, and + * Mike Corrigan {engebret|bergner|mikec}@us.ibm.com + * Plus various changes from other IBM teams... + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#undef DEBUG + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "interrupt.h" + +#ifdef DEBUG +#define DBG(fmt...) udbg_printf(fmt) +#else +#define DBG(fmt...) +#endif + +/* + * The primary thread of each non-boot processor is recorded here before + * smp init. + */ +/* static cpumask_t of_spin_map; */ + +/** + * smp_startup_cpu() - start the given cpu + * + * At boot time, there is nothing to do for primary threads which were + * started from Open Firmware. For anything else, call RTAS with the + * appropriate start location. + * + * Returns: + * 0 - failure + * 1 - success + */ +static inline int __devinit smp_startup_cpu(unsigned int lcpu) +{ + return 0; +} + +static void smp_beatic_message_pass(int target, int msg) +{ + unsigned int i; + + if (target < NR_CPUS) { + beatic_cause_IPI(target, msg); + } else { + for_each_online_cpu(i) { + if (target == MSG_ALL_BUT_SELF + && i == smp_processor_id()) + continue; + beatic_cause_IPI(i, msg); + } + } +} + +static int __init smp_beatic_probe(void) +{ + return cpus_weight(cpu_possible_map); +} + +static void __devinit smp_beatic_setup_cpu(int cpu) +{ + beatic_setup_cpu(cpu); +} + +static void __devinit smp_celleb_kick_cpu(int nr) +{ + BUG_ON(nr < 0 || nr >= NR_CPUS); + + if (!smp_startup_cpu(nr)) + return; +} + +static int smp_celleb_cpu_bootable(unsigned int nr) +{ + return 1; +} +static struct smp_ops_t bpa_beatic_smp_ops = { + .message_pass = smp_beatic_message_pass, + .probe = smp_beatic_probe, + .kick_cpu = smp_celleb_kick_cpu, + .setup_cpu = smp_beatic_setup_cpu, + .cpu_bootable = smp_celleb_cpu_bootable, +}; + +/* This is called very early */ +void __init smp_init_celleb(void) +{ + DBG(" -> smp_init_celleb()\n"); + + smp_ops = &bpa_beatic_smp_ops; + + DBG(" <- smp_init_celleb()\n"); +} -- cgit v1.2.3 From 6e47a0f38203656125bb6b81216aa4a4f506e98c Mon Sep 17 00:00:00 2001 From: Ishizaki Kou Date: Fri, 2 Feb 2007 16:48:04 +0900 Subject: [POWERPC] Celleb: add celleb_defconfig This patch creates defconfig file for Celleb platform. Signed-off-by: Kou Ishizaki Acked-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/configs/celleb_defconfig | 1408 +++++++++++++++++++++++++++++++++ 1 file changed, 1408 insertions(+) create mode 100644 arch/powerpc/configs/celleb_defconfig (limited to 'arch') diff --git a/arch/powerpc/configs/celleb_defconfig b/arch/powerpc/configs/celleb_defconfig new file mode 100644 index 000000000000..a1fe97197ead --- /dev/null +++ b/arch/powerpc/configs/celleb_defconfig @@ -0,0 +1,1408 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.20-rc4 +# Thu Jan 11 20:55:33 2007 +# +CONFIG_PPC64=y +CONFIG_64BIT=y +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_ARCH_HAS_ILOG2_U64=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_COMPAT=y +CONFIG_SYSVIPC_COMPAT=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +# CONFIG_PPC_UDBG_16550 is not set +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +# CONFIG_DEFAULT_UIMAGE is not set + +# +# Processor support +# +# CONFIG_POWER4_ONLY is not set +CONFIG_POWER3=y +CONFIG_POWER4=y +CONFIG_PPC_FPU=y +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_PPC_OF_PLATFORM_PCI=y +CONFIG_ALTIVEC=y +CONFIG_PPC_STD_MMU=y +CONFIG_VIRT_CPU_ACCOUNTING=y +CONFIG_SMP=y +CONFIG_NR_CPUS=4 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +# CONFIG_CPUSETS is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_KMOD=y +CONFIG_STOP_MACHINE=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_BLK_DEV_IO_TRACE is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# Platform support +# +CONFIG_PPC_MULTIPLATFORM=y +# CONFIG_EMBEDDED6xx is not set +# CONFIG_APUS is not set +# CONFIG_PPC_PSERIES is not set +# CONFIG_PPC_ISERIES is not set +# CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_PMAC is not set +# CONFIG_PPC_MAPLE is not set +# CONFIG_PPC_PASEMI is not set +CONFIG_PPC_CELL=y +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PPC_IBM_CELL_BLADE is not set +# CONFIG_PPC_PS3 is not set +CONFIG_PPC_CELLEB=y +CONFIG_PPC_UDBG_BEAT=y +# CONFIG_U3_DART is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_WANT_EARLY_SERIAL is not set +# CONFIG_MPIC is not set + +# +# Cell Broadband Engine options +# +CONFIG_SPU_FS=y +CONFIG_SPU_BASE=y +# CONFIG_CBE_RAS is not set + +# +# Kernel options +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_PREEMPT_BKL=y +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_MISC=m +CONFIG_FORCE_MAX_ZONEORDER=13 +# CONFIG_IOMMU_VMERGE is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_KEXEC=y +# CONFIG_CRASH_DUMP is not set +# CONFIG_IRQ_ALL_CPUS is not set +CONFIG_NUMA=y +CONFIG_NODES_SHIFT=4 +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +# CONFIG_DISCONTIGMEM_MANUAL is not set +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_NEED_MULTIPLE_NODES=y +CONFIG_HAVE_MEMORY_PRESENT=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_EXTREME=y +CONFIG_MEMORY_HOTPLUG=y +CONFIG_MEMORY_HOTPLUG_SPARSE=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y +CONFIG_RESOURCES_64BIT=y +CONFIG_ARCH_MEMORY_PROBE=y +CONFIG_NODES_SPAN_OTHER_NODES=y +# CONFIG_PPC_64K_PAGES is not set +# CONFIG_SCHED_SMT is not set +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_GENERIC_ISA_DMA=y +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_INDIRECT_PCI is not set +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PCIEPORTBUS is not set +# CONFIG_PCI_DEBUG is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set +CONFIG_KERNEL_START=0xc000000000000000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +CONFIG_IPV6=y +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +# CONFIG_IPV6_MIP6 is not set +CONFIG_INET6_XFRM_TUNNEL=m +CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=y +CONFIG_INET6_XFRM_MODE_TUNNEL=y +CONFIG_INET6_XFRM_MODE_BEET=y +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=y +CONFIG_IPV6_TUNNEL=m +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK is not set +# CONFIG_NF_CONNTRACK_ENABLED is not set +# CONFIG_NETFILTER_XTABLES is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_QUEUE=m + +# +# IPv6: Netfilter Configuration (EXPERIMENTAL) +# +# CONFIG_IP6_NF_QUEUE is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=131072 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +CONFIG_IDEDISK_MULTI_MODE=y +CONFIG_BLK_DEV_IDECD=m +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_IDEPCI_SHARE_IRQ=y +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +CONFIG_IDEDMA_PCI_AUTO=y +# CONFIG_IDEDMA_ONLYDISK is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_JMICRON is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SL82C105 is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +CONFIG_BLK_DEV_IDE_CELLEB=y +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +CONFIG_IDEDMA_AUTO=y +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=m +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=m +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=m +# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +# CONFIG_MD_RAID10 is not set +# CONFIG_MD_RAID456 is not set +# CONFIG_MD_MULTIPATH is not set +# CONFIG_MD_FAULTY is not set +CONFIG_BLK_DEV_DM=m +# CONFIG_DM_DEBUG is not set +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +# CONFIG_DM_MULTIPATH_EMC is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# +# CONFIG_MAC_EMUMOUSEBTN is not set +# CONFIG_WINDFARM is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_NET_PCI is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +CONFIG_SPIDER_NET=y +# CONFIG_QLA3XXX is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_PCIPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_SERIAL_NONSTANDARD=y +# CONFIG_COMPUTONE is not set +# CONFIG_ROCKETPORT is not set +# CONFIG_CYCLADES is not set +# CONFIG_DIGIEPCA is not set +# CONFIG_MOXA_INTELLIO is not set +# CONFIG_MOXA_SMARTIO is not set +# CONFIG_MOXA_SMARTIO_NEW is not set +# CONFIG_ISI is not set +# CONFIG_SYNCLINK is not set +# CONFIG_SYNCLINKMP is not set +# CONFIG_SYNCLINK_GT is not set +# CONFIG_N_HDLC is not set +# CONFIG_SPECIALIX is not set +# CONFIG_SX is not set +# CONFIG_RIO is not set +# CONFIG_STALDRV is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_TXX9=y +CONFIG_HAS_TXX9_SERIAL=y +CONFIG_SERIAL_TXX9_CONSOLE=y +# CONFIG_SERIAL_TXX9_STDSERIAL is not set +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +CONFIG_HVC_DRIVER=y +CONFIG_HVC_BEAT=y + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +# CONFIG_HW_RANDOM is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +CONFIG_I2C=y +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB is not set +# CONFIG_FB_IBM_GXT4500 is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# HID Devices +# +CONFIG_HID=y + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_MULTITHREAD_PROBE is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=m +# CONFIG_USB_EHCI_SPLIT_ISO is not set +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=m +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +CONFIG_USB_HIDDEV=y +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_TOUCHSCREEN is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# Virtualization +# + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +CONFIG_EXT2_FS_XIP=y +CONFIG_FS_XIP=y +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +# CONFIG_ZISOFS is not set +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +CONFIG_HUGETLBFS=y +CONFIG_HUGETLB_PAGE=y +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +CONFIG_NFSD=m +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +# CONFIG_NFSD_V4 is not set +CONFIG_NFSD_TCP=y +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_ACL_SUPPORT=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +CONFIG_EFI_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=m +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_DEFLATE=m +CONFIG_PLIST=y +CONFIG_IOMAP_COPY=y + +# +# Instrumentation Support +# +# CONFIG_PROFILING is not set +# CONFIG_KPROBES is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_LOG_BUF_SHIFT=15 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_RWSEMS is not set +CONFIG_DEBUG_SPINLOCK_SLEEP=y +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_FORCED_INLINING is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUGGER=y +CONFIG_XMON=y +CONFIG_XMON_DEFAULT=y +CONFIG_XMON_DISASSEMBLY=y +CONFIG_IRQSTACKS=y +# CONFIG_BOOTX_TEXT is not set +CONFIG_PPC_EARLY_DEBUG=y +# CONFIG_PPC_EARLY_DEBUG_LPAR is not set +# CONFIG_PPC_EARLY_DEBUG_G5 is not set +# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set +# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set +# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set +# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set +CONFIG_PPC_EARLY_DEBUG_BEAT=y + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_TEST=m + +# +# Hardware crypto devices +# -- cgit v1.2.3 From a1fdf6940a2a3d3c7475755eba5881403473252d Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Sun, 4 Feb 2007 03:16:08 -0500 Subject: [POWERPC] Assign all PCI busses on G3 Blue & White G3 Blue & White is misconfigured by default so that CardBus controllers in PCI slots don't work. The PCI bridge is programmed to only allow access to bus 1 but not higher busses. The patch forces the PCI busses to be reassigned if a Grackle controller is found and the machine identifies itself as "PowerMac1,1" Signed-off-by: Pavel Roskin Acked-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/sysdev/grackle.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/sysdev/grackle.c b/arch/powerpc/sysdev/grackle.c index b6ec793a23be..42053625f498 100644 --- a/arch/powerpc/sysdev/grackle.c +++ b/arch/powerpc/sysdev/grackle.c @@ -56,6 +56,8 @@ static inline void grackle_set_loop_snoop(struct pci_controller *bp, int enable) void __init setup_grackle(struct pci_controller *hose) { setup_indirect_pci(hose, 0xfec00000, 0xfee00000); + if (machine_is_compatible("PowerMac1,1")) + pci_assign_all_buses = 1; if (machine_is_compatible("AAPL,PowerBook1998")) grackle_set_loop_snoop(hose, 1); #if 0 /* Disabled for now, HW problems ??? */ -- cgit v1.2.3 From 39c870d5b503fa684198baf90bab2daa35ef0151 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Sun, 4 Feb 2007 16:36:49 -0600 Subject: [POWERPC] pasemi: UART udbg support Early debug output for PA Semi UART. Uses the 2.05 CI real mode ops. Signed-off-by: Olof Johansson Signed-off-by: Paul Mackerras --- arch/powerpc/Kconfig.debug | 7 +++++++ arch/powerpc/kernel/misc_64.S | 40 ++++++++++++++++++++++++++++++++++++++++ arch/powerpc/kernel/udbg.c | 2 ++ arch/powerpc/kernel/udbg_16550.c | 24 ++++++++++++++++++++++++ 4 files changed, 73 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug index 2bbeb1b19950..d39d13327e6d 100644 --- a/arch/powerpc/Kconfig.debug +++ b/arch/powerpc/Kconfig.debug @@ -185,6 +185,13 @@ config PPC_EARLY_DEBUG_ISERIES Select this to enable early debugging for legacy iSeries. You need to hit "Ctrl-x Ctrl-x" to see the messages on the console. +config PPC_EARLY_DEBUG_PAS_REALMODE + bool "PA Semi real mode" + depends on PPC_PASEMI + help + Select this to enable early debugging for PA Semi. + Output will be on UART0. + config PPC_EARLY_DEBUG_BEAT bool "Beat HV Console" depends on PPC_CELLEB diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S index 21fd2c662a99..519861da0423 100644 --- a/arch/powerpc/kernel/misc_64.S +++ b/arch/powerpc/kernel/misc_64.S @@ -311,6 +311,46 @@ _GLOBAL(real_writeb) blr #endif /* defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE) */ +#ifdef CONFIG_PPC_PASEMI + +/* No support in all binutils for these yet, so use defines */ +#define LBZCIX(RT,RA,RB) .long (0x7c0006aa|(RT<<21)|(RA<<16)|(RB << 11)) +#define STBCIX(RS,RA,RB) .long (0x7c0007aa|(RS<<21)|(RA<<16)|(RB << 11)) + + +_GLOBAL(real_205_readb) + mfmsr r7 + ori r0,r7,MSR_DR + xori r0,r0,MSR_DR + sync + mtmsrd r0 + sync + isync + LBZCIX(r3,0,r3) + isync + mtmsrd r7 + sync + isync + blr + +_GLOBAL(real_205_writeb) + mfmsr r7 + ori r0,r7,MSR_DR + xori r0,r0,MSR_DR + sync + mtmsrd r0 + sync + isync + STBCIX(r3,0,r4) + isync + mtmsrd r7 + sync + isync + blr + +#endif /* CONFIG_PPC_PASEMI */ + + #ifdef CONFIG_CPU_FREQ_PMAC64 /* * SCOM access functions for 970 (FX only for now) diff --git a/arch/powerpc/kernel/udbg.c b/arch/powerpc/kernel/udbg.c index e225a761dc2a..8f5afdbad0d5 100644 --- a/arch/powerpc/kernel/udbg.c +++ b/arch/powerpc/kernel/udbg.c @@ -47,6 +47,8 @@ void __init udbg_early_init(void) udbg_init_iseries(); #elif defined(CONFIG_PPC_EARLY_DEBUG_BEAT) udbg_init_debug_beat(); +#elif defined(CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE) + udbg_init_pas_realmode(); #endif } diff --git a/arch/powerpc/kernel/udbg_16550.c b/arch/powerpc/kernel/udbg_16550.c index 2d17f2b8eda7..e738f93b42fe 100644 --- a/arch/powerpc/kernel/udbg_16550.c +++ b/arch/powerpc/kernel/udbg_16550.c @@ -14,6 +14,8 @@ extern u8 real_readb(volatile u8 __iomem *addr); extern void real_writeb(u8 data, volatile u8 __iomem *addr); +extern u8 real_205_readb(volatile u8 __iomem *addr); +extern void real_205_writeb(u8 data, volatile u8 __iomem *addr); struct NS16550 { /* this struct must be packed */ @@ -167,3 +169,25 @@ void __init udbg_init_maple_realmode(void) udbg_getc_poll = NULL; } #endif /* CONFIG_PPC_MAPLE */ + +#ifdef CONFIG_PPC_PASEMI +void udbg_pas_real_putc(char c) +{ + if (udbg_comport) { + while ((real_205_readb(&udbg_comport->lsr) & LSR_THRE) == 0) + /* wait for idle */; + real_205_writeb(c, &udbg_comport->thr); eieio(); + if (c == '\n') + udbg_pas_real_putc('\r'); + } +} + +void udbg_init_pas_realmode(void) +{ + udbg_comport = (volatile struct NS16550 __iomem *)0xfcff03f8; + + udbg_putc = udbg_pas_real_putc; + udbg_getc = NULL; + udbg_getc_poll = NULL; +} +#endif /* CONFIG_PPC_MAPLE */ -- cgit v1.2.3 From bfed9d32d968b2054a036d419537e9e9909bb343 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Sun, 4 Feb 2007 16:36:50 -0600 Subject: [POWERPC] pasemi: Machine check handler Print out decoded machine check information on PA6T. Signed-off-by: Olof Johansson Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pasemi/setup.c | 43 +++++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/platforms/pasemi/setup.c b/arch/powerpc/platforms/pasemi/setup.c index 0505dd884ae2..4142873a87ef 100644 --- a/arch/powerpc/platforms/pasemi/setup.c +++ b/arch/powerpc/platforms/pasemi/setup.c @@ -147,6 +147,48 @@ static void __init pas_progress(char *s, unsigned short hex) } +static int pas_machine_check_handler(struct pt_regs *regs) +{ + int cpu = smp_processor_id(); + unsigned long srr0, srr1, dsisr; + + srr0 = regs->nip; + srr1 = regs->msr; + dsisr = mfspr(SPRN_DSISR); + printk(KERN_ERR "Machine Check on CPU %d\n", cpu); + printk(KERN_ERR "SRR0 0x%016lx SRR1 0x%016lx\n", srr0, srr1); + printk(KERN_ERR "DSISR 0x%016lx DAR 0x%016lx\n", dsisr, regs->dar); + printk(KERN_ERR "Cause:\n"); + + if (srr1 & 0x200000) + printk(KERN_ERR "Signalled by SDC\n"); + if (srr1 & 0x100000) { + printk(KERN_ERR "Load/Store detected error:\n"); + if (dsisr & 0x8000) + printk(KERN_ERR "D-cache ECC double-bit error or bus error\n"); + if (dsisr & 0x4000) + printk(KERN_ERR "LSU snoop response error\n"); + if (dsisr & 0x2000) + printk(KERN_ERR "MMU SLB multi-hit or invalid B field\n"); + if (dsisr & 0x1000) + printk(KERN_ERR "Recoverable Duptags\n"); + if (dsisr & 0x800) + printk(KERN_ERR "Recoverable D-cache parity error count overflow\n"); + if (dsisr & 0x400) + printk(KERN_ERR "TLB parity error count overflow\n"); + } + if (srr1 & 0x80000) + printk(KERN_ERR "Bus Error\n"); + if (srr1 & 0x40000) + printk(KERN_ERR "I-side SLB multiple hit\n"); + if (srr1 & 0x20000) + printk(KERN_ERR "I-cache parity error hit\n"); + + /* SRR1[62] is from MSR[62] if recoverable, so pass that back */ + return !!(srr1 & 0x2); +} + + /* * Called very early, MMU is off, device-tree isn't unflattened */ @@ -175,4 +217,5 @@ define_machine(pas) { .calibrate_decr = generic_calibrate_decr, .check_legacy_ioport = pas_check_legacy_ioport, .progress = pas_progress, + .machine_check_exception = pas_machine_check_handler, }; -- cgit v1.2.3 From 1199919b69ff9559a3d3444fb5eb45b7cc48264d Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Sun, 4 Feb 2007 16:36:51 -0600 Subject: [POWERPC] pasemi: Idle loops Powersave support on PA6T. Right now it only uses 'doze' mode, and will default to no savings (spin). Signed-off-by: Olof Johansson Acked-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/Makefile | 1 + arch/powerpc/kernel/cpu_setup_pa6t.S | 44 ++++++++++++++++ arch/powerpc/kernel/cputable.c | 4 ++ arch/powerpc/platforms/pasemi/Makefile | 3 +- arch/powerpc/platforms/pasemi/idle.c | 88 +++++++++++++++++++++++++++++++ arch/powerpc/platforms/pasemi/pasemi.h | 7 +++ arch/powerpc/platforms/pasemi/powersave.S | 80 ++++++++++++++++++++++++++++ arch/powerpc/platforms/pasemi/setup.c | 2 +- 8 files changed, 227 insertions(+), 2 deletions(-) create mode 100644 arch/powerpc/kernel/cpu_setup_pa6t.S create mode 100644 arch/powerpc/platforms/pasemi/idle.c create mode 100644 arch/powerpc/platforms/pasemi/powersave.S (limited to 'arch') diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index d2ded19e4064..8120d428ebfd 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -17,6 +17,7 @@ obj-y += vdso32/ obj-$(CONFIG_PPC64) += setup_64.o binfmt_elf32.o sys_ppc32.o \ signal_64.o ptrace32.o \ paca.o cpu_setup_ppc970.o \ + cpu_setup_pa6t.o \ firmware.o sysfs.o nvram_64.o obj-$(CONFIG_PPC64) += vdso64/ obj-$(CONFIG_ALTIVEC) += vecemu.o vector.o diff --git a/arch/powerpc/kernel/cpu_setup_pa6t.S b/arch/powerpc/kernel/cpu_setup_pa6t.S new file mode 100644 index 000000000000..4047be25c4d2 --- /dev/null +++ b/arch/powerpc/kernel/cpu_setup_pa6t.S @@ -0,0 +1,44 @@ +/* + * Copyright (C) 2006-2007 PA Semi, Inc + * + * Maintained by: Olof Johansson + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include +#include +#include +#include +#include +#include + +/* Right now, restore and setup are the same thing */ +_GLOBAL(__restore_cpu_pa6t) +_GLOBAL(__setup_cpu_pa6t) + /* Do nothing if not running in HV mode */ + mfmsr r0 + rldicl. r0,r0,4,63 + beqlr + + mfspr r0,SPRN_HID5 + ori r0,r0,0x30 + mtspr SPRN_HID5,r0 + + mfspr r0,SPRN_LPCR + ori r0,r0,0x7000 + mtspr SPRN_LPCR,r0 + + blr diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 4939b3d56dfb..dd17dffbf058 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -43,6 +43,8 @@ extern void __setup_cpu_745x(unsigned long offset, struct cpu_spec* spec); #ifdef CONFIG_PPC64 extern void __setup_cpu_ppc970(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_ppc970MP(unsigned long offset, struct cpu_spec* spec); +extern void __setup_cpu_pa6t(unsigned long offset, struct cpu_spec* spec); +extern void __restore_cpu_pa6t(unsigned long offset, struct cpu_spec* spec); extern void __restore_cpu_ppc970(void); #endif /* CONFIG_PPC64 */ @@ -369,6 +371,8 @@ static struct cpu_spec cpu_specs[] = { .dcache_bsize = 64, .num_pmcs = 6, .pmc_type = PPC_PMC_PA6T, + .cpu_setup = __setup_cpu_pa6t, + .cpu_restore = __restore_cpu_pa6t, .platform = "pa6t", }, { /* default match */ diff --git a/arch/powerpc/platforms/pasemi/Makefile b/arch/powerpc/platforms/pasemi/Makefile index 1be1a993c5f5..fe4da46074bb 100644 --- a/arch/powerpc/platforms/pasemi/Makefile +++ b/arch/powerpc/platforms/pasemi/Makefile @@ -1 +1,2 @@ -obj-y += setup.o pci.o time.o +obj-y += setup.o pci.o time.o idle.o powersave.o + diff --git a/arch/powerpc/platforms/pasemi/idle.c b/arch/powerpc/platforms/pasemi/idle.c new file mode 100644 index 000000000000..1ca3ff381591 --- /dev/null +++ b/arch/powerpc/platforms/pasemi/idle.c @@ -0,0 +1,88 @@ +/* + * Copyright (C) 2006-2007 PA Semi, Inc + * + * Maintained by: Olof Johansson + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#undef DEBUG + +#include +#include + +#include +#include + +#include "pasemi.h" + +struct sleep_mode { + char *name; + void (*entry)(void); +}; + +static struct sleep_mode modes[] = { + { .name = "spin", .entry = &idle_spin }, + { .name = "doze", .entry = &idle_doze }, +}; + +static int current_mode = 0; + +static int pasemi_system_reset_exception(struct pt_regs *regs) +{ + /* If we were woken up from power savings, we need to return + * to the calling function, since nip is not saved across + * all modes. + */ + + if (regs->msr & SRR1_WAKEMASK) + regs->nip = regs->link; + + switch (regs->msr & SRR1_WAKEMASK) { + case SRR1_WAKEEE: + do_IRQ(regs); + break; + case SRR1_WAKEDEC: + timer_interrupt(regs); + break; + default: + /* do system reset */ + return 0; + } + /* everything handled */ + regs->msr |= MSR_RI; + return 1; +} + +void __init pasemi_idle_init(void) +{ + ppc_md.system_reset_exception = pasemi_system_reset_exception; + ppc_md.power_save = modes[current_mode].entry; + printk(KERN_INFO "Using PA6T idle loop (%s)\n", modes[current_mode].name); +} + +static int __init idle_param(char *p) +{ + int i; + for (i = 0; i < sizeof(modes)/sizeof(struct sleep_mode); i++) { + if (!strcmp(modes[i].name, p)) { + current_mode = i; + break; + } + } + return 0; +} + +early_param("idle", idle_param); diff --git a/arch/powerpc/platforms/pasemi/pasemi.h b/arch/powerpc/platforms/pasemi/pasemi.h index 51c2a2397ecf..94fd00cc6a10 100644 --- a/arch/powerpc/platforms/pasemi/pasemi.h +++ b/arch/powerpc/platforms/pasemi/pasemi.h @@ -4,4 +4,11 @@ extern unsigned long pas_get_boot_time(void); extern void pas_pci_init(void); +extern void __init pasemi_idle_init(void); + +/* Power savings modes, implemented in asm */ +extern void idle_spin(void); +extern void idle_doze(void); + + #endif /* _PASEMI_PASEMI_H */ diff --git a/arch/powerpc/platforms/pasemi/powersave.S b/arch/powerpc/platforms/pasemi/powersave.S new file mode 100644 index 000000000000..6d0fba6aab17 --- /dev/null +++ b/arch/powerpc/platforms/pasemi/powersave.S @@ -0,0 +1,80 @@ +/* + * Copyright (C) 2006-2007 PA Semi, Inc + * + * Maintained by: Olof Johansson + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include +#include +#include +#include +#include +#include +#include + +/* Power savings opcodes since not all binutils have them at this time */ +#define DOZE .long 0x4c000324 +#define NAP .long 0x4c000364 +#define SLEEP .long 0x4c0003a4 +#define RVW .long 0x4c0003e4 + +/* Common sequence to do before going to any of the + * powersavings modes. + */ + +#define PRE_SLEEP_SEQUENCE \ + std r3,8(r1); \ + ptesync ; \ + ld r3,8(r1); \ +1: cmpd r3,r3; \ + bne 1b + +_doze: + PRE_SLEEP_SEQUENCE + DOZE + b . + + +_GLOBAL(idle_spin) + blr + +_GLOBAL(idle_doze) + LOAD_REG_ADDR(r3, _doze) + b sleep_common + +/* Add more modes here later */ + +sleep_common: + mflr r0 + std r0, 16(r1) + stdu r1,-64(r1) + + LOAD_REG_IMMEDIATE(r6,MSR_DR|MSR_IR|MSR_ME|MSR_EE) + mfmsr r4 + andc r5,r4,r6 + mtmsrd r5,0 + + mtctr r3 + bctrl + + mtmsrd r4,0 + + addi r1,r1,64 + ld r0,16(r1) + mtlr r0 + blr + diff --git a/arch/powerpc/platforms/pasemi/setup.c b/arch/powerpc/platforms/pasemi/setup.c index 4142873a87ef..f69f5e76618f 100644 --- a/arch/powerpc/platforms/pasemi/setup.c +++ b/arch/powerpc/platforms/pasemi/setup.c @@ -82,7 +82,7 @@ void __init pas_setup_arch(void) conswitchp = &dummy_con; #endif - printk(KERN_DEBUG "Using default idle loop\n"); + pasemi_idle_init(); } /* No legacy IO on our parts */ -- cgit v1.2.3 From f620be99e9355c41693f0c748ba9260f69278ee0 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Sun, 4 Feb 2007 16:36:52 -0600 Subject: [POWERPC] pasemi: Implement restart Implement reset on platforms/pasemi. Default is just to reset the cpu using the SDC registers. Signed-off-by: Olof Johansson Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pasemi/setup.c | 24 +++++++++--------------- 1 file changed, 9 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/pasemi/setup.c b/arch/powerpc/platforms/pasemi/setup.c index f69f5e76618f..cabf7017c05e 100644 --- a/arch/powerpc/platforms/pasemi/setup.c +++ b/arch/powerpc/platforms/pasemi/setup.c @@ -38,21 +38,13 @@ #include "pasemi.h" -static void pas_restart(char *cmd) -{ - printk("restart unimplemented, looping...\n"); - for (;;) ; -} - -static void pas_power_off(void) -{ - printk("power off unimplemented, looping...\n"); - for (;;) ; -} +static void __iomem *reset_reg; -static void pas_halt(void) +static void pas_restart(char *cmd) { - pas_power_off(); + printk("Restarting...\n"); + while (1) + out_le32(reset_reg, 0x6000000); } #ifdef CONFIG_SMP @@ -82,6 +74,10 @@ void __init pas_setup_arch(void) conswitchp = &dummy_con; #endif + /* Remap SDC register for doing reset */ + /* XXXOJN This should maybe come out of the device tree */ + reset_reg = ioremap(0xfc101100, 4); + pasemi_idle_init(); } @@ -211,8 +207,6 @@ define_machine(pas) { .init_IRQ = pas_init_IRQ, .get_irq = mpic_get_irq, .restart = pas_restart, - .power_off = pas_power_off, - .halt = pas_halt, .get_boot_time = pas_get_boot_time, .calibrate_decr = generic_calibrate_decr, .check_legacy_ioport = pas_check_legacy_ioport, -- cgit v1.2.3 From c388cfebbf22acd2b6adf757b35e28d4be66ac7c Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Sun, 4 Feb 2007 16:36:53 -0600 Subject: [POWERPC] pasemi: SMP timebase sync Timebase update is simple on PA6T, since global updates can be done from one core by writing to an SPR. Signed-off-by: Olof Johansson Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pasemi/setup.c | 27 +++++++++++++++++++++++++-- 1 file changed, 25 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/pasemi/setup.c b/arch/powerpc/platforms/pasemi/setup.c index cabf7017c05e..2d9652b6acb3 100644 --- a/arch/powerpc/platforms/pasemi/setup.c +++ b/arch/powerpc/platforms/pasemi/setup.c @@ -48,13 +48,36 @@ static void pas_restart(char *cmd) } #ifdef CONFIG_SMP +static DEFINE_SPINLOCK(timebase_lock); + +static void __devinit pas_give_timebase(void) +{ + unsigned long tb; + + spin_lock(&timebase_lock); + mtspr(SPRN_TBCTL, TBCTL_FREEZE); + tb = mftb(); + mtspr(SPRN_TBCTL, TBCTL_UPDATE_LOWER | (tb & 0xffffffff)); + mtspr(SPRN_TBCTL, TBCTL_UPDATE_UPPER | (tb >> 32)); + mtspr(SPRN_TBCTL, TBCTL_RESTART); + spin_unlock(&timebase_lock); + pr_debug("pas_give_timebase: cpu %d gave tb %lx\n", + smp_processor_id(), tb); +} + +static void __devinit pas_take_timebase(void) +{ + pr_debug("pas_take_timebase: cpu %d has tb %lx\n", + smp_processor_id(), mftb()); +} + struct smp_ops_t pas_smp_ops = { .probe = smp_mpic_probe, .message_pass = smp_mpic_message_pass, .kick_cpu = smp_generic_kick_cpu, .setup_cpu = smp_mpic_setup_cpu, - .give_timebase = smp_generic_give_timebase, - .take_timebase = smp_generic_take_timebase, + .give_timebase = pas_give_timebase, + .take_timebase = pas_take_timebase, }; #endif /* CONFIG_SMP */ -- cgit v1.2.3 From f9fba5b72dbedc691dcb10ae666ec03f279b07f4 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Sun, 4 Feb 2007 16:36:54 -0600 Subject: [POWERPC] pasemi: Configure DMA controller interrupts The DMA controller on PWRficient is somewhat special -- has a PCI header so it looks like it's on the root PCI (-Express) root bus, but it uses more than the default number of interrupts (and they are hardwired). We need to wire up all interrupts for the DMA controller. The generic IRQ code will only map the primary interrupt from the PCI header (128), so add 129->211 by hand. Signed-off-by: Olof Johansson Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pasemi/pasemi.h | 1 + arch/powerpc/platforms/pasemi/pci.c | 13 +++++++++++++ arch/powerpc/platforms/pasemi/setup.c | 1 + 3 files changed, 15 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/platforms/pasemi/pasemi.h b/arch/powerpc/platforms/pasemi/pasemi.h index 94fd00cc6a10..8391e31d4733 100644 --- a/arch/powerpc/platforms/pasemi/pasemi.h +++ b/arch/powerpc/platforms/pasemi/pasemi.h @@ -3,6 +3,7 @@ extern unsigned long pas_get_boot_time(void); extern void pas_pci_init(void); +extern void __devinit pas_pci_irq_fixup(struct pci_dev *dev); extern void __init pasemi_idle_init(void); diff --git a/arch/powerpc/platforms/pasemi/pci.c b/arch/powerpc/platforms/pasemi/pci.c index faa618e04047..7ecb2ba24db9 100644 --- a/arch/powerpc/platforms/pasemi/pci.c +++ b/arch/powerpc/platforms/pasemi/pci.c @@ -163,6 +163,19 @@ static void __init pas_fixup_phb_resources(void) } +void __devinit pas_pci_irq_fixup(struct pci_dev *dev) +{ + /* DMA is special, 84 interrupts (128 -> 211), all but 128 + * need to be mapped by hand here. + */ + if (dev->vendor == 0x1959 && dev->device == 0xa007) { + int i; + for (i = 129; i < 212; i++) + irq_create_mapping(NULL, i); + } +} + + void __init pas_pci_init(void) { struct device_node *np, *root; diff --git a/arch/powerpc/platforms/pasemi/setup.c b/arch/powerpc/platforms/pasemi/setup.c index 2d9652b6acb3..9096aac1c622 100644 --- a/arch/powerpc/platforms/pasemi/setup.c +++ b/arch/powerpc/platforms/pasemi/setup.c @@ -235,4 +235,5 @@ define_machine(pas) { .check_legacy_ioport = pas_check_legacy_ioport, .progress = pas_progress, .machine_check_exception = pas_machine_check_handler, + .pci_irq_fixup = pas_pci_irq_fixup, }; -- cgit v1.2.3 From 31c56d820e03a2fd47f81d6c826f92caf511f9ee Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Sun, 4 Feb 2007 16:36:55 -0600 Subject: [POWERPC] pasemi: iommu support I/O TLB support for PA6T-1682M. Signed-off-by: Olof Johansson Signed-off-by: Paul Mackerras --- arch/powerpc/Kconfig | 1 + arch/powerpc/platforms/pasemi/Kconfig | 10 ++ arch/powerpc/platforms/pasemi/Makefile | 2 +- arch/powerpc/platforms/pasemi/iommu.c | 281 +++++++++++++++++++++++++++++++++ arch/powerpc/platforms/pasemi/pasemi.h | 4 + arch/powerpc/platforms/pasemi/setup.c | 13 +- 6 files changed, 306 insertions(+), 5 deletions(-) create mode 100644 arch/powerpc/platforms/pasemi/Kconfig create mode 100644 arch/powerpc/platforms/pasemi/iommu.c (limited to 'arch') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 50bb5067d86e..901f12de113a 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -720,6 +720,7 @@ source arch/powerpc/platforms/86xx/Kconfig source arch/powerpc/platforms/8xx/Kconfig source arch/powerpc/platforms/cell/Kconfig source arch/powerpc/platforms/ps3/Kconfig +source arch/powerpc/platforms/pasemi/Kconfig menu "Kernel options" diff --git a/arch/powerpc/platforms/pasemi/Kconfig b/arch/powerpc/platforms/pasemi/Kconfig new file mode 100644 index 000000000000..68dc529dfd2f --- /dev/null +++ b/arch/powerpc/platforms/pasemi/Kconfig @@ -0,0 +1,10 @@ +menu "PA Semi PWRficient options" + depends on PPC_PASEMI + +config PPC_PASEMI_IOMMU + bool "PA Semi IOMMU support" + depends on PPC_PASEMI + help + IOMMU support for PA6T-1682M + +endmenu diff --git a/arch/powerpc/platforms/pasemi/Makefile b/arch/powerpc/platforms/pasemi/Makefile index fe4da46074bb..e657ccae90a9 100644 --- a/arch/powerpc/platforms/pasemi/Makefile +++ b/arch/powerpc/platforms/pasemi/Makefile @@ -1,2 +1,2 @@ -obj-y += setup.o pci.o time.o idle.o powersave.o +obj-y += setup.o pci.o time.o idle.o powersave.o iommu.o diff --git a/arch/powerpc/platforms/pasemi/iommu.c b/arch/powerpc/platforms/pasemi/iommu.c new file mode 100644 index 000000000000..459a53b7d24d --- /dev/null +++ b/arch/powerpc/platforms/pasemi/iommu.c @@ -0,0 +1,281 @@ +/* + * Copyright (C) 2005-2007, PA Semi, Inc + * + * Maintained by: Olof Johansson + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#undef DEBUG + +#include +#include +#include +#include +#include +#include + + +#define IOBMAP_PAGE_SHIFT 12 +#define IOBMAP_PAGE_SIZE (1 << IOBMAP_PAGE_SHIFT) +#define IOBMAP_PAGE_MASK (IOBMAP_PAGE_SIZE - 1) + +#define IOBMAP_PAGE_FACTOR (PAGE_SHIFT - IOBMAP_PAGE_SHIFT) + +#define IOB_BASE 0xe0000000 +#define IOB_SIZE 0x3000 +/* Configuration registers */ +#define IOBCAP_REG 0x10 +#define IOBCOM_REG 0x40 +/* Enable IOB address translation */ +#define IOBCOM_ATEN 0x00000100 + +/* Address decode configuration register */ +#define IOB_AD_REG 0x53 +/* IOBCOM_AD_REG fields */ +#define IOB_AD_VGPRT 0x00000e00 +#define IOB_AD_VGAEN 0x00000100 +/* Direct mapping settings */ +#define IOB_AD_MPSEL_MASK 0x00000030 +#define IOB_AD_MPSEL_B38 0x00000000 +#define IOB_AD_MPSEL_B40 0x00000010 +#define IOB_AD_MPSEL_B42 0x00000020 +/* Translation window size / enable */ +#define IOB_AD_TRNG_MASK 0x00000003 +#define IOB_AD_TRNG_256M 0x00000000 +#define IOB_AD_TRNG_2G 0x00000001 +#define IOB_AD_TRNG_128G 0x00000003 + +#define IOB_TABLEBASE_REG 0x55 + +/* Base of the 64 4-byte L1 registers */ +#define IOB_XLT_L1_REGBASE 0xac0 + +/* Register to invalidate TLB entries */ +#define IOB_AT_INVAL_TLB_REG 0xb40 + +/* The top two bits of the level 1 entry contains valid and type flags */ +#define IOBMAP_L1E_V 0x40000000 +#define IOBMAP_L1E_V_B 0x80000000 + +/* For big page entries, the bottom two bits contains flags */ +#define IOBMAP_L1E_BIG_CACHED 0x00000002 +#define IOBMAP_L1E_BIG_PRIORITY 0x00000001 + +/* For regular level 2 entries, top 2 bits contain valid and cache flags */ +#define IOBMAP_L2E_V 0x80000000 +#define IOBMAP_L2E_V_CACHED 0xc0000000 + +static u32 *iob; +static u32 iob_l1_emptyval; +static u32 iob_l2_emptyval; +static u32 *iob_l2_base; + +static struct iommu_table iommu_table_iobmap; +static int iommu_table_iobmap_inited; + +static void iobmap_build(struct iommu_table *tbl, long index, + long npages, unsigned long uaddr, + enum dma_data_direction direction) +{ + u32 *ip; + u32 rpn; + unsigned long bus_addr; + + pr_debug("iobmap: build at: %lx, %lx, addr: %lx\n", index, npages, uaddr); + + bus_addr = (tbl->it_offset + index) << PAGE_SHIFT; + + npages <<= IOBMAP_PAGE_FACTOR; + index <<= IOBMAP_PAGE_FACTOR; + + ip = ((u32 *)tbl->it_base) + index; + + while (npages--) { + rpn = virt_to_abs(uaddr) >> IOBMAP_PAGE_SHIFT; + + *(ip++) = IOBMAP_L2E_V | rpn; + /* invalidate tlb, can be optimized more */ + out_le32(iob+IOB_AT_INVAL_TLB_REG, bus_addr >> 14); + + uaddr += IOBMAP_PAGE_SIZE; + bus_addr += IOBMAP_PAGE_SIZE; + } +} + + +static void iobmap_free(struct iommu_table *tbl, long index, + long npages) +{ + u32 *ip; + unsigned long bus_addr; + + pr_debug("iobmap: free at: %lx, %lx\n", index, npages); + + bus_addr = (tbl->it_offset + index) << PAGE_SHIFT; + + npages <<= IOBMAP_PAGE_FACTOR; + index <<= IOBMAP_PAGE_FACTOR; + + ip = ((u32 *)tbl->it_base) + index; + + while (npages--) { + *(ip++) = iob_l2_emptyval; + /* invalidate tlb, can be optimized more */ + out_le32(iob+IOB_AT_INVAL_TLB_REG, bus_addr >> 14); + bus_addr += IOBMAP_PAGE_SIZE; + } +} + + +static void iommu_table_iobmap_setup(void) +{ + pr_debug(" -> %s\n", __func__); + iommu_table_iobmap.it_busno = 0; + iommu_table_iobmap.it_offset = 0; + /* it_size is in number of entries */ + iommu_table_iobmap.it_size = 0x80000000 >> PAGE_SHIFT; + + /* Initialize the common IOMMU code */ + iommu_table_iobmap.it_base = (unsigned long)iob_l2_base; + iommu_table_iobmap.it_index = 0; + /* XXXOJN tune this to avoid IOB cache invals. + * Should probably be 8 (64 bytes) + */ + iommu_table_iobmap.it_blocksize = 4; + iommu_init_table(&iommu_table_iobmap, 0); + pr_debug(" <- %s\n", __func__); +} + + + +static void pci_dma_bus_setup_pasemi(struct pci_bus *bus) +{ + struct device_node *dn; + + pr_debug("pci_dma_bus_setup, bus %p, bus->self %p\n", bus, bus->self); + + if (!iommu_table_iobmap_inited) { + iommu_table_iobmap_inited = 1; + iommu_table_iobmap_setup(); + } + + dn = pci_bus_to_OF_node(bus); + + if (dn) + PCI_DN(dn)->iommu_table = &iommu_table_iobmap; + +} + + +static void pci_dma_dev_setup_pasemi(struct pci_dev *dev) +{ + pr_debug("pci_dma_dev_setup, dev %p (%s)\n", dev, pci_name(dev)); + + /* DMA device is untranslated, but all other PCI-e goes through + * the IOMMU + */ + if (dev->vendor == 0x1959 && dev->device == 0xa007) + dev->dev.archdata.dma_ops = &dma_direct_ops; + else + dev->dev.archdata.dma_data = &iommu_table_iobmap; +} + +static void pci_dma_bus_setup_null(struct pci_bus *b) { } +static void pci_dma_dev_setup_null(struct pci_dev *d) { } + +int iob_init(struct device_node *dn) +{ + unsigned long tmp; + u32 regword; + int i; + + pr_debug(" -> %s\n", __func__); + + /* Allocate a spare page to map all invalid IOTLB pages. */ + tmp = lmb_alloc(IOBMAP_PAGE_SIZE, IOBMAP_PAGE_SIZE); + if (!tmp) + panic("IOBMAP: Cannot allocate spare page!"); + /* Empty l1 is marked invalid */ + iob_l1_emptyval = 0; + /* Empty l2 is mapped to dummy page */ + iob_l2_emptyval = IOBMAP_L2E_V | (tmp >> IOBMAP_PAGE_SHIFT); + + iob = ioremap(IOB_BASE, IOB_SIZE); + if (!iob) + panic("IOBMAP: Cannot map registers!"); + + /* setup direct mapping of the L1 entries */ + for (i = 0; i < 64; i++) { + /* Each L1 covers 32MB, i.e. 8K entries = 32K of ram */ + regword = IOBMAP_L1E_V | (__pa(iob_l2_base + i*0x2000) >> 12); + out_le32(iob+IOB_XLT_L1_REGBASE+i, regword); + } + + /* set 2GB translation window, based at 0 */ + regword = in_le32(iob+IOB_AD_REG); + regword &= ~IOB_AD_TRNG_MASK; + regword |= IOB_AD_TRNG_2G; + out_le32(iob+IOB_AD_REG, regword); + + /* Enable translation */ + regword = in_le32(iob+IOBCOM_REG); + regword |= IOBCOM_ATEN; + out_le32(iob+IOBCOM_REG, regword); + + pr_debug(" <- %s\n", __func__); + + return 0; +} + + +/* These are called very early. */ +void iommu_init_early_pasemi(void) +{ + int iommu_off; + +#ifndef CONFIG_PPC_PASEMI_IOMMU + iommu_off = 1; +#else + iommu_off = of_chosen && + get_property(of_chosen, "linux,iommu-off", NULL); +#endif + if (iommu_off) { + /* Direct I/O, IOMMU off */ + ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_null; + ppc_md.pci_dma_bus_setup = pci_dma_bus_setup_null; + pci_dma_ops = &dma_direct_ops; + + return; + } + + iob_init(NULL); + + ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_pasemi; + ppc_md.pci_dma_bus_setup = pci_dma_bus_setup_pasemi; + ppc_md.tce_build = iobmap_build; + ppc_md.tce_free = iobmap_free; + pci_dma_ops = &dma_iommu_ops; +} + +void __init alloc_iobmap_l2(void) +{ +#ifndef CONFIG_PPC_PASEMI_IOMMU + return; +#endif + /* For 2G space, 8x64 pages (2^21 bytes) is max total l2 size */ + iob_l2_base = (u32 *)abs_to_virt(lmb_alloc_base(1UL<<21, 1UL<<21, 0x80000000)); + + printk(KERN_INFO "IOBMAP L2 allocated at: %p\n", iob_l2_base); +} diff --git a/arch/powerpc/platforms/pasemi/pasemi.h b/arch/powerpc/platforms/pasemi/pasemi.h index 8391e31d4733..2d3927e6edb0 100644 --- a/arch/powerpc/platforms/pasemi/pasemi.h +++ b/arch/powerpc/platforms/pasemi/pasemi.h @@ -4,6 +4,9 @@ extern unsigned long pas_get_boot_time(void); extern void pas_pci_init(void); extern void __devinit pas_pci_irq_fixup(struct pci_dev *dev); +extern void __devinit pas_pci_dma_dev_setup(struct pci_dev *dev); + +extern void __init alloc_iobmap_l2(void); extern void __init pasemi_idle_init(void); @@ -12,4 +15,5 @@ extern void idle_spin(void); extern void idle_doze(void); + #endif /* _PASEMI_PASEMI_H */ diff --git a/arch/powerpc/platforms/pasemi/setup.c b/arch/powerpc/platforms/pasemi/setup.c index 9096aac1c622..449cf1a08291 100644 --- a/arch/powerpc/platforms/pasemi/setup.c +++ b/arch/powerpc/platforms/pasemi/setup.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2006 PA Semi, Inc + * Copyright (C) 2006-2007 PA Semi, Inc * * Authors: Kip Walker, PA Semi * Olof Johansson, PA Semi @@ -87,9 +87,6 @@ void __init pas_setup_arch(void) /* Setup SMP callback */ smp_ops = &pas_smp_ops; #endif - /* no iommu yet */ - pci_dma_ops = &dma_direct_ops; - /* Lookup PCI hosts */ pas_pci_init(); @@ -207,6 +204,11 @@ static int pas_machine_check_handler(struct pt_regs *regs) return !!(srr1 & 0x2); } +static void __init pas_init_early(void) +{ + iommu_init_early_pasemi(); +} + /* * Called very early, MMU is off, device-tree isn't unflattened @@ -220,6 +222,8 @@ static int __init pas_probe(void) hpte_init_native(); + alloc_iobmap_l2(); + return 1; } @@ -227,6 +231,7 @@ define_machine(pas) { .name = "PA Semi PA6T-1682M", .probe = pas_probe, .setup_arch = pas_setup_arch, + .init_early = pas_init_early, .init_IRQ = pas_init_IRQ, .get_irq = mpic_get_irq, .restart = pas_restart, -- cgit v1.2.3 From 721e0c9037ef4e755f3bd87fee92beff452be420 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Sun, 4 Feb 2007 16:36:56 -0600 Subject: [POWERPC] pasemi: defconfig Base pasemi defconfig. Nothing special, just the native drivers plus common PCI-express/PCI cards. Signed-off-by: Olof Johansson Signed-off-by: Paul Mackerras --- arch/powerpc/configs/pasemi_defconfig | 1722 +++++++++++++++++++++++++++++++++ 1 file changed, 1722 insertions(+) create mode 100644 arch/powerpc/configs/pasemi_defconfig (limited to 'arch') diff --git a/arch/powerpc/configs/pasemi_defconfig b/arch/powerpc/configs/pasemi_defconfig new file mode 100644 index 000000000000..97a57e996663 --- /dev/null +++ b/arch/powerpc/configs/pasemi_defconfig @@ -0,0 +1,1722 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.20-rc6 +# Thu Feb 1 22:54:15 2007 +# +CONFIG_PPC64=y +CONFIG_64BIT=y +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_ARCH_HAS_ILOG2_U64=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_COMPAT=y +CONFIG_SYSVIPC_COMPAT=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_PPC_UDBG_16550=y +CONFIG_GENERIC_TBSYNC=y +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +# CONFIG_DEFAULT_UIMAGE is not set + +# +# Processor support +# +CONFIG_POWER4_ONLY=y +CONFIG_POWER4=y +CONFIG_PPC_FPU=y +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +# CONFIG_PPC_OF_PLATFORM_PCI is not set +CONFIG_ALTIVEC=y +CONFIG_PPC_STD_MMU=y +# CONFIG_VIRT_CPU_ACCOUNTING is not set +CONFIG_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +# CONFIG_CPUSETS is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set +CONFIG_STOP_MACHINE=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_BLK_DEV_IO_TRACE is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# Platform support +# +CONFIG_PPC_MULTIPLATFORM=y +# CONFIG_EMBEDDED6xx is not set +# CONFIG_APUS is not set +CONFIG_PPC_PSERIES=y +# CONFIG_PPC_ISERIES is not set +# CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_PMAC is not set +# CONFIG_PPC_MAPLE is not set +CONFIG_PPC_PASEMI=y +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PPC_IBM_CELL_BLADE is not set +# CONFIG_PPC_PS3 is not set +CONFIG_PPC_NATIVE=y +# CONFIG_UDBG_RTAS_CONSOLE is not set +CONFIG_XICS=y +# CONFIG_U3_DART is not set +CONFIG_PPC_RTAS=y +CONFIG_RTAS_ERROR_LOGGING=y +CONFIG_RTAS_PROC=y +# CONFIG_RTAS_FLASH is not set +# CONFIG_MMIO_NVRAM is not set +CONFIG_IBMVIO=y +# CONFIG_IBMEBUS is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_WANT_EARLY_SERIAL is not set +CONFIG_MPIC=y + +# +# PA Semi PWRficient options +# +CONFIG_PPC_PASEMI_IOMMU=y + +# +# Kernel options +# +CONFIG_HZ_100=y +# CONFIG_HZ_250 is not set +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=100 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_PREEMPT_BKL=y +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_FORCE_MAX_ZONEORDER=13 +CONFIG_IOMMU_VMERGE=y +# CONFIG_HOTPLUG_CPU is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +# CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set +# CONFIG_IRQ_ALL_CPUS is not set +# CONFIG_PPC_SPLPAR is not set +CONFIG_EEH=y +# CONFIG_SCANLOG is not set +# CONFIG_LPARCFG is not set +# CONFIG_NUMA is not set +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_RESOURCES_64BIT=y +# CONFIG_PPC_64K_PAGES is not set +# CONFIG_SCHED_SMT is not set +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +# CONFIG_SECCOMP is not set +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_GENERIC_ISA_DMA=y +# CONFIG_MPIC_WEIRD is not set +CONFIG_PPC_I8259=y +# CONFIG_PPC_INDIRECT_PCI is not set +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PCIEPORTBUS is not set +# CONFIG_PCI_DEBUG is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +CONFIG_PCCARD=y +CONFIG_PCMCIA_DEBUG=y +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y +CONFIG_CARDBUS=y + +# +# PC-card bridges +# +# CONFIG_YENTA is not set +# CONFIG_PD6729 is not set +# CONFIG_I82092 is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set +CONFIG_KERNEL_START=0xc000000000000000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_NET_KEY=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +CONFIG_NET_IPIP=y +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +CONFIG_INET_AH=y +CONFIG_INET_ESP=y +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=y +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +# CONFIG_MTD_PARTITIONS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +CONFIG_MTD_SLRAM=y +CONFIG_MTD_PHRAM=y +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_NAND_CAFE is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +CONFIG_IDEDISK_MULTI_MODE=y +# CONFIG_BLK_DEV_IDECS is not set +CONFIG_BLK_DEV_IDECD=y +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +CONFIG_BLK_DEV_IDESCSI=y +CONFIG_IDE_TASK_IOCTL=y + +# +# IDE chipset support/bugfixes +# +# CONFIG_IDE_GENERIC is not set +# CONFIG_BLK_DEV_IDEPCI is not set +# CONFIG_IDE_ARM is not set +# CONFIG_BLK_DEV_IDEDMA is not set +# CONFIG_IDEDMA_AUTO is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=y +CONFIG_CHR_DEV_OSST=y +CONFIG_BLK_DEV_SR=y +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=y +CONFIG_CHR_DEV_SCH=y + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_CONSTANTS=y +CONFIG_SCSI_LOGGING=y +# CONFIG_SCSI_SCAN_ASYNC is not set + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +CONFIG_BLK_DEV_3W_XXXX_RAID=y +CONFIG_SCSI_3W_9XXX=y +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_IBMVSCSI is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set + +# +# PCMCIA SCSI adapter support +# +# CONFIG_PCMCIA_FDOMAIN is not set +# CONFIG_PCMCIA_QLOGIC is not set +# CONFIG_PCMCIA_SYM53C500 is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +# CONFIG_SATA_AHCI is not set +CONFIG_SATA_SVW=y +# CONFIG_ATA_PIIX is not set +CONFIG_SATA_MV=y +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +CONFIG_SATA_SIL=y +CONFIG_SATA_SIL24=y +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +CONFIG_ATA_GENERIC=y +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PCMCIA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +CONFIG_IEEE1394=y + +# +# Subsystem Options +# +# CONFIG_IEEE1394_VERBOSEDEBUG is not set +# CONFIG_IEEE1394_OUI_DB is not set +# CONFIG_IEEE1394_EXTRA_CONFIG_ROMS is not set +# CONFIG_IEEE1394_EXPORT_FULL_API is not set + +# +# Device Drivers +# +CONFIG_IEEE1394_PCILYNX=y +CONFIG_IEEE1394_OHCI1394=y + +# +# Protocol Drivers +# +# CONFIG_IEEE1394_VIDEO1394 is not set +CONFIG_IEEE1394_SBP2=y +# CONFIG_IEEE1394_ETH1394 is not set +# CONFIG_IEEE1394_DV1394 is not set +CONFIG_IEEE1394_RAWIO=y + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# +# CONFIG_MAC_EMUMOUSEBTN is not set +# CONFIG_WINDFARM is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +CONFIG_DUMMY=y +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_IBMVETH=y +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +CONFIG_EEPRO100=y +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_VIA_RHINE is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +CONFIG_E1000=y +CONFIG_E1000_NAPI=y +# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +CONFIG_TIGON3=y +# CONFIG_BNX2 is not set +# CONFIG_QLA3XXX is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# PCMCIA network device support +# +# CONFIG_NET_PCMCIA is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +CONFIG_INPUT_JOYDEV=y +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_INPUT_MOUSE=y +# CONFIG_MOUSE_PS2 is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y +# CONFIG_SERIAL_8250_CS is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_ICOM is not set +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=4 +CONFIG_HVC_DRIVER=y +CONFIG_HVC_CONSOLE=y +CONFIG_HVC_RTAS=y +# CONFIG_HVCS is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y +CONFIG_GEN_RTC=y +CONFIG_GEN_RTC_X=y +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_AGP is not set +# CONFIG_DRM is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +CONFIG_RAW_DRIVER=y +CONFIG_MAX_RAW_DEVS=256 +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +CONFIG_I2C_ALGOPCF=y +CONFIG_I2C_ALGOPCA=y + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +CONFIG_SENSORS_EEPROM=y +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +CONFIG_I2C_DEBUG_BUS=y +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +CONFIG_HWMON_VID=y +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +CONFIG_SENSORS_LM85=y +# CONFIG_SENSORS_LM87 is not set +CONFIG_SENSORS_LM90=y +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +CONFIG_FIRMWARE_EDID=y +CONFIG_FB=y +CONFIG_FB_DDC=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_MACMODES=y +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_OF is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +CONFIG_FB_VGA16=y +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_NVIDIA=y +CONFIG_FB_NVIDIA_I2C=y +CONFIG_FB_RIVA=y +CONFIG_FB_RIVA_I2C=y +# CONFIG_FB_RIVA_DEBUG is not set +CONFIG_FB_MATROX=y +CONFIG_FB_MATROX_MILLENIUM=y +CONFIG_FB_MATROX_MYSTIQUE=y +CONFIG_FB_MATROX_G=y +CONFIG_FB_MATROX_I2C=y +CONFIG_FB_MATROX_MAVEN=y +CONFIG_FB_MATROX_MULTIHEAD=y +CONFIG_FB_RADEON=y +CONFIG_FB_RADEON_I2C=y +# CONFIG_FB_RADEON_DEBUG is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_IBM_GXT4500 is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +CONFIG_VGA_CONSOLE=y +CONFIG_VGACON_SOFT_SCROLLBACK=y +CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64 +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y + +# +# Logo configuration +# +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_HWDEP=y +CONFIG_SND_RAWMIDI=y +CONFIG_SND_SEQUENCER=y +# CONFIG_SND_SEQ_DUMMY is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# PCI devices +# +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS300 is not set +# CONFIG_SND_ALS4000 is not set +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_DARLA20 is not set +# CONFIG_SND_GINA20 is not set +# CONFIG_SND_LAYLA20 is not set +# CONFIG_SND_DARLA24 is not set +# CONFIG_SND_GINA24 is not set +# CONFIG_SND_LAYLA24 is not set +# CONFIG_SND_MONA is not set +# CONFIG_SND_MIA is not set +# CONFIG_SND_ECHO3G is not set +# CONFIG_SND_INDIGO is not set +# CONFIG_SND_INDIGOIO is not set +# CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RIPTIDE is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_YMFPCI is not set + +# +# ALSA PowerMac devices +# + +# +# USB devices +# +CONFIG_SND_USB_AUDIO=y +CONFIG_SND_USB_USX2Y=y + +# +# PCMCIA devices +# +# CONFIG_SND_VXPOCKET is not set +# CONFIG_SND_PDAUDIOCF is not set + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set + +# +# HID Devices +# +CONFIG_HID=y + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_SPLIT_ISO is not set +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_UHCI_HCD=y +CONFIG_USB_SL811_HCD=y +# CONFIG_USB_SL811_CS is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +CONFIG_USB_LIBUSUAL=y + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_TOUCHSCREEN is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set + +# +# RTC drivers +# +# CONFIG_RTC_DRV_X1205 is not set +CONFIG_RTC_DRV_DS1307=y +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_TEST is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# Virtualization +# + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +CONFIG_AUTOFS_FS=y +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +# CONFIG_JOLIET is not set +# CONFIG_ZISOFS is not set +CONFIG_UDF_FS=y +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +CONFIG_HUGETLBFS=y +CONFIG_HUGETLB_PAGE=y +CONFIG_RAMFS=y +CONFIG_CONFIGFS_FS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +CONFIG_MAC_PARTITION=y +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_IOMAP_COPY=y + +# +# Instrumentation Support +# +CONFIG_PROFILING=y +CONFIG_OPROFILE=y +# CONFIG_KPROBES is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_LOG_BUF_SHIFT=17 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RWSEMS is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUGGER=y +CONFIG_XMON=y +CONFIG_XMON_DEFAULT=y +CONFIG_XMON_DISASSEMBLY=y +# CONFIG_IRQSTACKS is not set +CONFIG_BOOTX_TEXT=y +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=y +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# -- cgit v1.2.3 From 4297c9869b3452860f1a2c588d43f9e62c701019 Mon Sep 17 00:00:00 2001 From: Nathan Lynch Date: Mon, 5 Feb 2007 20:01:15 -0600 Subject: [POWERPC] Maple: use mmio nvram Some systems supported by the maple platform (e.g. JS2x blades running SLOF) are able to use the mmio_nvram backend for reading and writing nvram. This is an improvement over the current situation -- no nvram access from userspace at all. Select MMIO_NVRAM for the maple platform. Initialize the mmio_nvram backend from maple setup code. Signed-off-by: Nathan Lynch Signed-off-by: Paul Mackerras --- arch/powerpc/Kconfig | 1 + arch/powerpc/platforms/maple/setup.c | 3 +++ 2 files changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 901f12de113a..5f80f0b828f2 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -491,6 +491,7 @@ config PPC_MAPLE select PPC_970_NAP select PPC_NATIVE select PPC_RTAS + select MMIO_NVRAM default n help This option enables support for the Maple 970FX Evaluation Board. diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c index 50855d4fd5a0..82d3f9e28d7c 100644 --- a/arch/powerpc/platforms/maple/setup.c +++ b/arch/powerpc/platforms/maple/setup.c @@ -62,6 +62,7 @@ #include #include #include +#include #include "maple.h" @@ -195,6 +196,8 @@ void __init maple_setup_arch(void) maple_use_rtas_reboot_and_halt_if_present(); printk(KERN_DEBUG "Using native/NAP idle loop\n"); + + mmio_nvram_init(); } /* -- cgit v1.2.3 From a2c70211fa072f4076f0e59f909b69105f69072e Mon Sep 17 00:00:00 2001 From: David Gibson Date: Tue, 6 Feb 2007 11:48:28 +1100 Subject: [POWERPC] Compile fixes for arch/powerpc dcr code The new dcr code does not currently compile when configured for native DCR access on ARCH=powerpc. This patch fixes the problems. Signed-off-by: David Gibson Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/ppc_ksyms.c | 1 + arch/ppc/kernel/ppc_ksyms.c | 1 + 2 files changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c index 95776b6af4e2..ecee596d28f6 100644 --- a/arch/powerpc/kernel/ppc_ksyms.c +++ b/arch/powerpc/kernel/ppc_ksyms.c @@ -44,6 +44,7 @@ #include #include #include +#include #ifdef CONFIG_8xx #include diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c index c8b65ca8a350..1f49503317cb 100644 --- a/arch/ppc/kernel/ppc_ksyms.c +++ b/arch/ppc/kernel/ppc_ksyms.c @@ -43,6 +43,7 @@ #include #include #include +#include #ifdef CONFIG_8xx #include -- cgit v1.2.3 From 449d846dbcbf61bdf7d50a923e4791102168c292 Mon Sep 17 00:00:00 2001 From: Livio Soares Date: Wed, 7 Feb 2007 12:51:36 +1100 Subject: [POWERPC] Fix performance monitor exception To the issue: some point during 2.6.20 development, Paul Mackerras introduced the "lazy IRQ disabling" patch (very cool work, BTW). In that patch, the performance monitor unit exception was marked as "maskable", in the sense that if interrupts were soft-disabled, that exception could be ignored. This broke my PowerPC profiling code. The symptom that I see is that a varying number of interrupts (from 0 to $n$, typically closer to 0) get delivered, when, in reality, it should always be very close to $n$. The issue stems from the way masking is being done. Masking in this fashion seems to work well with the decrementer and external interrupts, because they are raised again until "really" handled. For the PMU, however, this does not apply (at least on my Xserver machine with a 970FX processor). If the PMU exception is not handled, it will _not_ be re-raised (at least on my machine). The documentation states that the PMXE bit in MMCR0 is set to 0 when the PMU exception is raised. However, software must re-set the bit to re-enable PMU exceptions. If the exception is ignored (as currently) not only is that interrupt lost, but because software does not re-set PMXE, the PMU registers are "frozen" forever. [This patch means that performance monitor exceptions are taken and handled even if irqs are off, as long as some other interrupt hasn't come along and caused interrupts to be hard-disabled. In this sense the PMU exception becomes like an NMI. The oprofile code for most powerpc processors does nothing that is unsafe in an NMI context, but the Cell oprofile code does a spin_lock_irqsave. However, that turns out to be OK because Cell doesn't actually use the performance monitor exception; performance monitor interrupts come in as a regular interrupt on Cell, so will be disabled when irqs are off. -- paulus.] Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/head_64.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index 71b1fe58e9e4..97cedcd6c9b4 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -613,7 +613,7 @@ system_call_pSeries: /*** pSeries interrupt support ***/ /* moved from 0xf00 */ - MASKABLE_EXCEPTION_PSERIES(., performance_monitor) + STD_EXCEPTION_PSERIES(., performance_monitor) /* * An interrupt came in while soft-disabled; clear EE in SRR1, -- cgit v1.2.3 From e56a6e20f3029ed5c178dd0328bd688dbbc8272a Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Wed, 7 Feb 2007 13:13:26 +1100 Subject: [POWERPC] Clear RI bit in MSR before restoring r13 when returning to userspace Some instruction tracing tools use the RI (recoverable interrupt) bit in the MSR to indicate when it's safe to single-step. Currently we clear RI after restoring r13 when returning to userspace. However, if we single-step past the point where r13 is restored, we'll corrupt r13 in the exception entry code and not restore it. This moves the clearing of RI to just before r13 is restored so this doesn't happen. Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/entry_64.S | 59 +++++++++++++++++++++++------------------- 1 file changed, 33 insertions(+), 26 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index 2551c0884afc..2b66d53dcc55 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -172,13 +172,18 @@ syscall_error_cont: stdcx. r0,0,r1 /* to clear the reservation */ andi. r6,r8,MSR_PR ld r4,_LINK(r1) + /* + * Clear RI before restoring r13. If we are returning to + * userspace and we take an exception after restoring r13, + * we end up corrupting the userspace r13 value. + */ + li r12,MSR_RI + andc r11,r10,r12 + mtmsrd r11,1 /* clear MSR.RI */ beq- 1f ACCOUNT_CPU_USER_EXIT(r11, r12) ld r13,GPR13(r1) /* only restore r13 if returning to usermode */ 1: ld r2,GPR2(r1) - li r12,MSR_RI - andc r11,r10,r12 - mtmsrd r11,1 /* clear MSR.RI */ ld r1,GPR1(r1) mtlr r4 mtcr r5 @@ -488,42 +493,44 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) #endif stb r5,PACASOFTIRQEN(r13) + /* extract EE bit and use it to restore paca->hard_enabled */ ld r3,_MSR(r1) + rldicl r4,r3,49,63 /* r0 = (r3 >> 15) & 1 */ + stb r4,PACAHARDIRQEN(r13) + + ld r4,_CTR(r1) + ld r0,_LINK(r1) + mtctr r4 + mtlr r0 + ld r4,_XER(r1) + mtspr SPRN_XER,r4 + + REST_8GPRS(5, r1) + andi. r0,r3,MSR_RI beq- unrecov_restore - /* extract EE bit and use it to restore paca->hard_enabled */ - rldicl r4,r3,49,63 /* r0 = (r3 >> 15) & 1 */ - stb r4,PACAHARDIRQEN(r13) + stdcx. r0,0,r1 /* to clear the reservation */ - andi. r0,r3,MSR_PR + /* + * Clear RI before restoring r13. If we are returning to + * userspace and we take an exception after restoring r13, + * we end up corrupting the userspace r13 value. + */ + mfmsr r4 + andc r4,r4,r0 /* r0 contains MSR_RI here */ + mtmsrd r4,1 /* * r13 is our per cpu area, only restore it if we are returning to * userspace */ + andi. r0,r3,MSR_PR beq 1f - ACCOUNT_CPU_USER_EXIT(r3, r4) + ACCOUNT_CPU_USER_EXIT(r2, r4) REST_GPR(13, r1) 1: - ld r3,_CTR(r1) - ld r0,_LINK(r1) - mtctr r3 - mtlr r0 - ld r3,_XER(r1) - mtspr SPRN_XER,r3 - - REST_8GPRS(5, r1) - - stdcx. r0,0,r1 /* to clear the reservation */ - - mfmsr r0 - li r2, MSR_RI - andc r0,r0,r2 - mtmsrd r0,1 - - ld r0,_MSR(r1) - mtspr SPRN_SRR1,r0 + mtspr SPRN_SRR1,r3 ld r2,_CCR(r1) mtcrf 0xFF,r2 -- cgit v1.2.3 From f03e64f2ca6ee3d0b7824536b1940497701fe766 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Tue, 6 Feb 2007 21:10:31 +1100 Subject: [POWERPC] Make pSeries use the H_BULK_REMOVE hypervisor call H_BULK_REMOVE lets us remove 4 entries from the MMU hash table with one hypervisor call. This uses it in pSeries_lpar_hpte_invalidate so we can tear down mappings with fewer hypervisor calls. Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pseries/lpar.c | 51 +++++++++++++++++++++++++++++++---- 1 file changed, 46 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c index 721436db3ef0..5a684fbd8f27 100644 --- a/arch/powerpc/platforms/pseries/lpar.c +++ b/arch/powerpc/platforms/pseries/lpar.c @@ -502,23 +502,64 @@ static void pSeries_lpar_hpte_invalidate(unsigned long slot, unsigned long va, BUG_ON(lpar_rc != H_SUCCESS); } +/* Flag bits for H_BULK_REMOVE */ +#define HBR_REQUEST 0x4000000000000000UL +#define HBR_RESPONSE 0x8000000000000000UL +#define HBR_END 0xc000000000000000UL +#define HBR_AVPN 0x0200000000000000UL +#define HBR_ANDCOND 0x0100000000000000UL + /* * Take a spinlock around flushes to avoid bouncing the hypervisor tlbie * lock. */ static void pSeries_lpar_flush_hash_range(unsigned long number, int local) { - int i; - unsigned long flags = 0; + unsigned long i, pix, rc; + unsigned long flags; struct ppc64_tlb_batch *batch = &__get_cpu_var(ppc64_tlb_batch); int lock_tlbie = !cpu_has_feature(CPU_FTR_LOCKLESS_TLBIE); + unsigned long param[9]; + unsigned long va; + unsigned long hash, index, shift, hidx, slot; + real_pte_t pte; + int psize; if (lock_tlbie) spin_lock_irqsave(&pSeries_lpar_tlbie_lock, flags); - for (i = 0; i < number; i++) - flush_hash_page(batch->vaddr[i], batch->pte[i], - batch->psize, local); + psize = batch->psize; + pix = 0; + for (i = 0; i < number; i++) { + va = batch->vaddr[i]; + pte = batch->pte[i]; + pte_iterate_hashed_subpages(pte, psize, va, index, shift) { + hash = hpt_hash(va, shift); + hidx = __rpte_to_hidx(pte, index); + if (hidx & _PTEIDX_SECONDARY) + hash = ~hash; + slot = (hash & htab_hash_mask) * HPTES_PER_GROUP; + slot += hidx & _PTEIDX_GROUP_IX; + param[pix] = HBR_REQUEST | HBR_AVPN | slot; + param[pix+1] = hpte_encode_v(va, psize) & HPTE_V_AVPN; + pix += 2; + if (pix == 8) { + rc = plpar_hcall9(H_BULK_REMOVE, param, + param[0], param[1], param[2], + param[3], param[4], param[5], + param[6], param[7]); + BUG_ON(rc != H_SUCCESS); + pix = 0; + } + } pte_iterate_hashed_end(); + } + if (pix) { + param[pix] = HBR_END; + rc = plpar_hcall9(H_BULK_REMOVE, param, param[0], param[1], + param[2], param[3], param[4], param[5], + param[6], param[7]); + BUG_ON(rc != H_SUCCESS); + } if (lock_tlbie) spin_unlock_irqrestore(&pSeries_lpar_tlbie_lock, flags); -- cgit v1.2.3 From 8209003547c4b1006943eac8dc6c1fb6493cafda Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Tue, 6 Feb 2007 22:55:19 -0600 Subject: [POWERPC] Added kprobes support to ppc32 Added kprobes to ppc32 platforms that have use single_step_exception. This excludes 4xx and anything Book-E since their debug mechanisms for single stepping are completely different. Signed-off-by: Kumar Gala --- arch/powerpc/Kconfig | 2 +- arch/powerpc/kernel/kprobes.c | 8 ++++++-- arch/powerpc/lib/Makefile | 2 +- 3 files changed, 8 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index aeb53096acf7..0b6325a77c75 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -1206,7 +1206,7 @@ source "arch/powerpc/oprofile/Kconfig" config KPROBES bool "Kprobes (EXPERIMENTAL)" - depends on PPC64 && KALLSYMS && EXPERIMENTAL && MODULES + depends on !BOOKE && !4xx && KALLSYMS && EXPERIMENTAL && MODULES help Kprobes allows you to trap at almost any kernel address and execute a callback function. register_kprobe() establishes diff --git a/arch/powerpc/kernel/kprobes.c b/arch/powerpc/kernel/kprobes.c index 4657563f8813..dd2886f97e98 100644 --- a/arch/powerpc/kernel/kprobes.c +++ b/arch/powerpc/kernel/kprobes.c @@ -46,8 +46,8 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p) if ((unsigned long)p->addr & 0x03) { printk("Attempt to register kprobe at an unaligned address\n"); ret = -EINVAL; - } else if (IS_MTMSRD(insn) || IS_RFID(insn)) { - printk("Cannot register a kprobe on rfid or mtmsrd\n"); + } else if (IS_MTMSRD(insn) || IS_RFID(insn) || IS_RFI(insn)) { + printk("Cannot register a kprobe on rfi/rfid or mtmsr[d]\n"); ret = -EINVAL; } @@ -483,8 +483,12 @@ int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) memcpy(&kcb->jprobe_saved_regs, regs, sizeof(struct pt_regs)); /* setup return addr to the jprobe handler routine */ +#ifdef CONFIG_PPC64 regs->nip = (unsigned long)(((func_descr_t *)jp->entry)->entry); regs->gpr[2] = (unsigned long)(((func_descr_t *)jp->entry)->toc); +#else + regs->nip = (unsigned long)jp->entry; +#endif return 1; } diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile index e2d414160c83..4b1ba49fbd9e 100644 --- a/arch/powerpc/lib/Makefile +++ b/arch/powerpc/lib/Makefile @@ -16,11 +16,11 @@ obj-$(CONFIG_PPC64) += checksum_64.o copypage_64.o copyuser_64.o \ strcase.o obj-$(CONFIG_QUICC_ENGINE) += rheap.o obj-$(CONFIG_XMON) += sstep.o +obj-$(CONFIG_KPROBES) += sstep.o obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-noncoherent.o ifeq ($(CONFIG_PPC64),y) obj-$(CONFIG_SMP) += locks.o -obj-$(CONFIG_DEBUG_KERNEL) += sstep.o endif # Temporary hack until we have migrated to asm-powerpc -- cgit v1.2.3 From 04903a30a327513b97c1271fc6bc4dad6502d1b8 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 7 Feb 2007 01:13:32 -0600 Subject: [POWERPC] Enable interrupts if we are doing fp math emulation Anytime we are emulating an instruction we are going to be doing some form of get_user() to get the instruction image to decode. Since get_user() might sleep we need to ensure we have interrupts enabled or we might see something like: Debug: sleeping function called from invalid context at arch/powerpc/kernel/traps.c:697 in_atomic():0, irqs_disabled():1 Call Trace: [D6023EB0] [C0007F84] show_stack+0x58/0x174 (unreliable) [D6023EE0] [C0022C34] __might_sleep+0xbc/0xd0 [D6023EF0] [C000D158] program_check_exception+0x1d8/0x4fc [D6023F40] [C000E744] ret_from_except_full+0x0/0x4c --- Exception: 700 at 0x102a7100 LR = 0xdb9ef04 However, we want to ensure that interrupts are disabled when handling a trap exception that might be used for a kernel breakpoint. This is why ProgramCheck is marked as EXC_XFER_STD instead of EXC_XFER_EE. Signed-off-by: Kumar Gala --- arch/powerpc/kernel/traps.c | 29 +++++++++++++++-------------- 1 file changed, 15 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index 6915b91868b8..f038caa3c2b9 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -739,20 +739,7 @@ void __kprobes program_check_exception(struct pt_regs *regs) extern int do_mathemu(struct pt_regs *regs); /* We can now get here via a FP Unavailable exception if the core - * has no FPU, in that case no reason flags will be set */ -#ifdef CONFIG_MATH_EMULATION - /* (reason & REASON_ILLEGAL) would be the obvious thing here, - * but there seems to be a hardware bug on the 405GP (RevD) - * that means ESR is sometimes set incorrectly - either to - * ESR_DST (!?) or 0. In the process of chasing this with the - * hardware people - not sure if it can happen on any illegal - * instruction or only on FP instructions, whether there is a - * pattern to occurences etc. -dgibson 31/Mar/2003 */ - if (!(reason & REASON_TRAP) && do_mathemu(regs) == 0) { - emulate_single_step(regs); - return; - } -#endif /* CONFIG_MATH_EMULATION */ + * has no FPU, in that case the reason flags will be 0 */ if (reason & REASON_FP) { /* IEEE FP exception */ @@ -778,6 +765,20 @@ void __kprobes program_check_exception(struct pt_regs *regs) local_irq_enable(); +#ifdef CONFIG_MATH_EMULATION + /* (reason & REASON_ILLEGAL) would be the obvious thing here, + * but there seems to be a hardware bug on the 405GP (RevD) + * that means ESR is sometimes set incorrectly - either to + * ESR_DST (!?) or 0. In the process of chasing this with the + * hardware people - not sure if it can happen on any illegal + * instruction or only on FP instructions, whether there is a + * pattern to occurences etc. -dgibson 31/Mar/2003 */ + if (do_mathemu(regs) == 0) { + emulate_single_step(regs); + return; + } +#endif /* CONFIG_MATH_EMULATION */ + /* Try to emulate it if we should. */ if (reason & (REASON_ILLEGAL | REASON_PRIVILEGED)) { switch (emulate_instruction(regs)) { -- cgit v1.2.3 From 5fad293bcbd48d9a2370020cf60e4b4a42559b12 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 7 Feb 2007 01:47:59 -0600 Subject: [POWERPC] Fixup error handling when emulating a floating point instruction When we do full FP emulation its possible that we need to post a SIGFPE based on the results of the emulation. The previous code ignored this case completely. Additionally, the Soft_emulate_8xx case had two issues. One, we should never generate a SIGFPE since the code only does data movement. Second, we were interpreting the return codes incorrectly, it returns 0 on success, 1 on illop and -EFAULT on a data access error. Signed-off-by: Kumar Gala --- arch/powerpc/kernel/traps.c | 82 +++++++++++++++++++++++++++++++++------------ 1 file changed, 60 insertions(+), 22 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index f038caa3c2b9..dcc6f159fd94 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -535,34 +535,40 @@ static void emulate_single_step(struct pt_regs *regs) } } -static void parse_fpe(struct pt_regs *regs) +static inline int __parse_fpscr(unsigned long fpscr) { - int code = 0; - unsigned long fpscr; - - flush_fp_to_thread(current); - - fpscr = current->thread.fpscr.val; + int ret = 0; /* Invalid operation */ if ((fpscr & FPSCR_VE) && (fpscr & FPSCR_VX)) - code = FPE_FLTINV; + ret = FPE_FLTINV; /* Overflow */ else if ((fpscr & FPSCR_OE) && (fpscr & FPSCR_OX)) - code = FPE_FLTOVF; + ret = FPE_FLTOVF; /* Underflow */ else if ((fpscr & FPSCR_UE) && (fpscr & FPSCR_UX)) - code = FPE_FLTUND; + ret = FPE_FLTUND; /* Divide by zero */ else if ((fpscr & FPSCR_ZE) && (fpscr & FPSCR_ZX)) - code = FPE_FLTDIV; + ret = FPE_FLTDIV; /* Inexact result */ else if ((fpscr & FPSCR_XE) && (fpscr & FPSCR_XX)) - code = FPE_FLTRES; + ret = FPE_FLTRES; + + return ret; +} + +static void parse_fpe(struct pt_regs *regs) +{ + int code = 0; + + flush_fp_to_thread(current); + + code = __parse_fpscr(current->thread.fpscr.val); _exception(SIGFPE, regs, code, regs->nip); } @@ -773,10 +779,21 @@ void __kprobes program_check_exception(struct pt_regs *regs) * hardware people - not sure if it can happen on any illegal * instruction or only on FP instructions, whether there is a * pattern to occurences etc. -dgibson 31/Mar/2003 */ - if (do_mathemu(regs) == 0) { + switch (do_mathemu(regs)) { + case 0: emulate_single_step(regs); return; + case 1: { + int code = 0; + code = __parse_fpscr(current->thread.fpscr.val); + _exception(SIGFPE, regs, code, regs->nip); + return; + } + case -EFAULT: + _exception(SIGSEGV, regs, SEGV_MAPERR, regs->nip); + return; } + /* fall through on any other errors */ #endif /* CONFIG_MATH_EMULATION */ /* Try to emulate it if we should. */ @@ -892,18 +909,39 @@ void SoftwareEmulation(struct pt_regs *regs) #ifdef CONFIG_MATH_EMULATION errcode = do_mathemu(regs); + + switch (errcode) { + case 0: + emulate_single_step(regs); + return; + case 1: { + int code = 0; + code = __parse_fpscr(current->thread.fpscr.val); + _exception(SIGFPE, regs, code, regs->nip); + return; + } + case -EFAULT: + _exception(SIGSEGV, regs, SEGV_MAPERR, regs->nip); + return; + default: + _exception(SIGILL, regs, ILL_ILLOPC, regs->nip); + return; + } + #else errcode = Soft_emulate_8xx(regs); -#endif - if (errcode) { - if (errcode > 0) - _exception(SIGFPE, regs, 0, 0); - else if (errcode == -EFAULT) - _exception(SIGSEGV, regs, 0, 0); - else - _exception(SIGILL, regs, ILL_ILLOPC, regs->nip); - } else + switch (errcode) { + case 0: emulate_single_step(regs); + return; + case 1: + _exception(SIGILL, regs, ILL_ILLOPC, regs->nip); + return; + case -EFAULT: + _exception(SIGSEGV, regs, SEGV_MAPERR, regs->nip); + return; + } +#endif } #endif /* CONFIG_8xx */ -- cgit v1.2.3 From ad75a41085d80c8ce5e885962c15779935f8267e Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Mon, 15 Jan 2007 20:11:47 -0800 Subject: USB: ps3 ehci bus glue USB EHCI driver bus glue for the PS3 game console. Signed-off-by: Geoff Levand Cc: David Brownell Signed-off-by: Greg Kroah-Hartman --- arch/powerpc/Kconfig | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index d6abe495c6b0..c393e1540071 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -529,6 +529,8 @@ config PPC_PS3 bool "Sony PS3 (incomplete)" depends on PPC_MULTIPLATFORM && PPC64 select PPC_CELL + select USB_ARCH_HAS_EHCI + select USB_EHCI_BIG_ENDIAN_MMIO help This option enables support for the Sony PS3 game console and other platforms using the PS3 hypervisor. -- cgit v1.2.3 From 6a6c957eba20814456bc4bffbd4ec42406f9eb02 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Mon, 15 Jan 2007 20:12:10 -0800 Subject: USB: ps3 ohci bus glue USB OHCI driver bus glue for the PS3 game console. Signed-off-by: Geoff Levand Cc: David Brownell Signed-off-by: Greg Kroah-Hartman --- arch/powerpc/Kconfig | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index c393e1540071..c1e01b22addc 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -529,6 +529,9 @@ config PPC_PS3 bool "Sony PS3 (incomplete)" depends on PPC_MULTIPLATFORM && PPC64 select PPC_CELL + select USB_ARCH_HAS_OHCI + select USB_OHCI_LITTLE_ENDIAN + select USB_OHCI_BIG_ENDIAN_MMIO select USB_ARCH_HAS_EHCI select USB_EHCI_BIG_ENDIAN_MMIO help -- cgit v1.2.3 From 8255cf35d503db7c1b26ae53b6b7f23ada82316f Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Sat, 6 Jan 2007 21:48:41 +0100 Subject: PCI: make isa_bridge Alpha-only Since isa_bridge is neither assigned any value !NULL nor used on !Alpha, there's no reason for providing it. Signed-off-by: Adrian Bunk Signed-off-by: Greg Kroah-Hartman --- arch/alpha/kernel/pci.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/alpha/kernel/pci.c b/arch/alpha/kernel/pci.c index 3c10b9a1ddf5..ab642a4f08de 100644 --- a/arch/alpha/kernel/pci.c +++ b/arch/alpha/kernel/pci.c @@ -575,3 +575,7 @@ void pci_iounmap(struct pci_dev *dev, void __iomem * addr) EXPORT_SYMBOL(pci_iomap); EXPORT_SYMBOL(pci_iounmap); + +/* FIXME: Some boxes have multiple ISA bridges! */ +struct pci_dev *isa_bridge; +EXPORT_SYMBOL(isa_bridge); -- cgit v1.2.3 From 0fcfdabbdbedb3bdc63f29209aeeac805df78a92 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 25 Jan 2007 19:34:08 +1100 Subject: MSI: Remove pci_scan_msi_device() pci_scan_msi_device() doesn't do anything anymore, so remove it. Signed-off-by: Michael Ellerman Signed-off-by: Greg Kroah-Hartman --- arch/powerpc/kernel/pci_64.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c index 01f18c683407..2b52b087aaa8 100644 --- a/arch/powerpc/kernel/pci_64.c +++ b/arch/powerpc/kernel/pci_64.c @@ -381,8 +381,6 @@ struct pci_dev *of_create_pci_dev(struct device_node *node, pci_device_add(dev, bus); - /* XXX pci_scan_msi_device(dev); */ - return dev; } EXPORT_SYMBOL(of_create_pci_dev); -- cgit v1.2.3 From 5b912c108c8b1fcecbfe13d6d9a183db97b682d3 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Sun, 28 Jan 2007 12:52:03 -0700 Subject: msi: Kill the msi_desc array. We need to be able to get from an irq number to a struct msi_desc. The msi_desc array in msi.c had several short comings the big one was that it could not be used outside of msi.c. Using irq_data in struct irq_desc almost worked except on some architectures irq_data needs to be used for something else. So this patch adds a msi_desc pointer to irq_desc, adds the appropriate wrappers and changes all of the msi code to use them. The dynamic_irq_init/cleanup code was tweaked to ensure the new field is left in a well defined state. Signed-off-by: Eric W. Biederman Acked-by: Ingo Molnar Signed-off-by: Greg Kroah-Hartman --- arch/ia64/sn/kernel/msi_sn.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/ia64/sn/kernel/msi_sn.c b/arch/ia64/sn/kernel/msi_sn.c index b3a435fd70fb..31fbb859b67e 100644 --- a/arch/ia64/sn/kernel/msi_sn.c +++ b/arch/ia64/sn/kernel/msi_sn.c @@ -74,7 +74,7 @@ int sn_setup_msi_irq(unsigned int irq, struct pci_dev *pdev) struct pcibus_bussoft *bussoft = SN_PCIDEV_BUSSOFT(pdev); struct sn_pcibus_provider *provider = SN_PCIDEV_BUSPROVIDER(pdev); - entry = get_irq_data(irq); + entry = get_irq_msi(irq); if (!entry->msi_attrib.is_64) return -EINVAL; -- cgit v1.2.3 From f7feaca77d6ad6bcfcc88ac54e3188970448d6fe Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Sun, 28 Jan 2007 12:56:37 -0700 Subject: msi: Make MSI useable more architectures The arch hooks arch_setup_msi_irq and arch_teardown_msi_irq are now responsible for allocating and freeing the linux irq in addition to setting up the the linux irq to work with the interrupt. arch_setup_msi_irq now takes a pci_device and a msi_desc and returns an irq. With this change in place this code should be useable by all platforms except those that won't let the OS touch the hardware like ppc RTAS. Signed-off-by: Eric W. Biederman Acked-by: Ingo Molnar Signed-off-by: Greg Kroah-Hartman --- arch/i386/kernel/io_apic.c | 17 ++++++++++++----- arch/ia64/kernel/msi_ia64.c | 19 ++++++++++++------- arch/ia64/sn/kernel/msi_sn.c | 20 ++++++++++++++------ arch/x86_64/kernel/io_apic.c | 17 ++++++++++++----- 4 files changed, 50 insertions(+), 23 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c index 6a3875f81a0a..5592fa6e1fa1 100644 --- a/arch/i386/kernel/io_apic.c +++ b/arch/i386/kernel/io_apic.c @@ -2606,25 +2606,32 @@ static struct irq_chip msi_chip = { .retrigger = ioapic_retrigger_irq, }; -int arch_setup_msi_irq(unsigned int irq, struct pci_dev *dev) +int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc) { struct msi_msg msg; - int ret; + int irq, ret; + irq = create_irq(); + if (irq < 0) + return irq; + + set_irq_msi(irq, desc); ret = msi_compose_msg(dev, irq, &msg); - if (ret < 0) + if (ret < 0) { + destroy_irq(irq); return ret; + } write_msi_msg(irq, &msg); set_irq_chip_and_handler_name(irq, &msi_chip, handle_edge_irq, "edge"); - return 0; + return irq; } void arch_teardown_msi_irq(unsigned int irq) { - return; + destroy_irq(irq); } #endif /* CONFIG_PCI_MSI */ diff --git a/arch/ia64/kernel/msi_ia64.c b/arch/ia64/kernel/msi_ia64.c index 822e59a1b822..0d05450c91c4 100644 --- a/arch/ia64/kernel/msi_ia64.c +++ b/arch/ia64/kernel/msi_ia64.c @@ -64,12 +64,17 @@ static void ia64_set_msi_irq_affinity(unsigned int irq, cpumask_t cpu_mask) } #endif /* CONFIG_SMP */ -int ia64_setup_msi_irq(unsigned int irq, struct pci_dev *pdev) +int ia64_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc) { struct msi_msg msg; unsigned long dest_phys_id; - unsigned int vector; + unsigned int irq, vector; + irq = create_irq(); + if (irq < 0) + return irq; + + set_irq_msi(irq, desc); dest_phys_id = cpu_physical_id(first_cpu(cpu_online_map)); vector = irq; @@ -89,12 +94,12 @@ int ia64_setup_msi_irq(unsigned int irq, struct pci_dev *pdev) write_msi_msg(irq, &msg); set_irq_chip_and_handler(irq, &ia64_msi_chip, handle_edge_irq); - return 0; + return irq; } void ia64_teardown_msi_irq(unsigned int irq) { - return; /* no-op */ + destroy_irq(irq); } static void ia64_ack_msi_irq(unsigned int irq) @@ -126,12 +131,12 @@ static struct irq_chip ia64_msi_chip = { }; -int arch_setup_msi_irq(unsigned int irq, struct pci_dev *pdev) +int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc) { if (platform_setup_msi_irq) - return platform_setup_msi_irq(irq, pdev); + return platform_setup_msi_irq(pdev, desc); - return ia64_setup_msi_irq(irq, pdev); + return ia64_setup_msi_irq(pdev, desc); } void arch_teardown_msi_irq(unsigned int irq) diff --git a/arch/ia64/sn/kernel/msi_sn.c b/arch/ia64/sn/kernel/msi_sn.c index 31fbb859b67e..ea3dc38d73fd 100644 --- a/arch/ia64/sn/kernel/msi_sn.c +++ b/arch/ia64/sn/kernel/msi_sn.c @@ -59,13 +59,12 @@ void sn_teardown_msi_irq(unsigned int irq) sn_intr_free(nasid, widget, sn_irq_info); sn_msi_info[irq].sn_irq_info = NULL; - return; + destroy_irq(irq); } -int sn_setup_msi_irq(unsigned int irq, struct pci_dev *pdev) +int sn_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *entry) { struct msi_msg msg; - struct msi_desc *entry; int widget; int status; nasid_t nasid; @@ -73,8 +72,8 @@ int sn_setup_msi_irq(unsigned int irq, struct pci_dev *pdev) struct sn_irq_info *sn_irq_info; struct pcibus_bussoft *bussoft = SN_PCIDEV_BUSSOFT(pdev); struct sn_pcibus_provider *provider = SN_PCIDEV_BUSPROVIDER(pdev); + int irq; - entry = get_irq_msi(irq); if (!entry->msi_attrib.is_64) return -EINVAL; @@ -84,6 +83,11 @@ int sn_setup_msi_irq(unsigned int irq, struct pci_dev *pdev) if (provider == NULL || provider->dma_map_consistent == NULL) return -EINVAL; + irq = create_irq(); + if (irq < 0) + return irq; + + set_irq_msi(irq, entry); /* * Set up the vector plumbing. Let the prom (via sn_intr_alloc) * decide which cpu to direct this msi at by default. @@ -95,12 +99,15 @@ int sn_setup_msi_irq(unsigned int irq, struct pci_dev *pdev) SWIN_WIDGETNUM(bussoft->bs_base); sn_irq_info = kzalloc(sizeof(struct sn_irq_info), GFP_KERNEL); - if (! sn_irq_info) + if (! sn_irq_info) { + destroy_irq(irq); return -ENOMEM; + } status = sn_intr_alloc(nasid, widget, sn_irq_info, irq, -1, -1); if (status) { kfree(sn_irq_info); + destroy_irq(irq); return -ENOMEM; } @@ -121,6 +128,7 @@ int sn_setup_msi_irq(unsigned int irq, struct pci_dev *pdev) if (! bus_addr) { sn_intr_free(nasid, widget, sn_irq_info); kfree(sn_irq_info); + destroy_irq(irq); return -ENOMEM; } @@ -139,7 +147,7 @@ int sn_setup_msi_irq(unsigned int irq, struct pci_dev *pdev) write_msi_msg(irq, &msg); set_irq_chip_and_handler(irq, &sn_msi_chip, handle_edge_irq); - return 0; + return irq; } #ifdef CONFIG_SMP diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c index d7bad90a5ad8..6be6730acb5c 100644 --- a/arch/x86_64/kernel/io_apic.c +++ b/arch/x86_64/kernel/io_apic.c @@ -1956,24 +1956,31 @@ static struct irq_chip msi_chip = { .retrigger = ioapic_retrigger_irq, }; -int arch_setup_msi_irq(unsigned int irq, struct pci_dev *dev) +int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc) { struct msi_msg msg; - int ret; + int irq, ret; + irq = create_irq(); + if (irq < 0) + return irq; + + set_irq_msi(irq, desc); ret = msi_compose_msg(dev, irq, &msg); - if (ret < 0) + if (ret < 0) { + destroy_irq(irq); return ret; + } write_msi_msg(irq, &msg); set_irq_chip_and_handler_name(irq, &msi_chip, handle_edge_irq, "edge"); - return 0; + return irq; } void arch_teardown_msi_irq(unsigned int irq) { - return; + destroy_irq(irq); } #endif /* CONFIG_PCI_MSI */ -- cgit v1.2.3 From 12e86f92fcfe4f0bcab0ad7fa4088a64c60d9b38 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Thu, 8 Feb 2007 15:02:35 +1100 Subject: [POWERPC] Only use H_BULK_REMOVE if the firmware supports it The previous patch changing pSeries to use H_BULK_REMOVE broke the JS20 blade, where the firmware doesn't support H_BULK_REMOVE. This adds a firmware check so that on machines that don't have H_BULK_REMOVE, we just use the H_REMOVE call as before. Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pseries/firmware.c | 1 + arch/powerpc/platforms/pseries/lpar.c | 22 ++++++++++++++-------- 2 files changed, 15 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/pseries/firmware.c b/arch/powerpc/platforms/pseries/firmware.c index 1c7b2baa5f73..90522e3c9d46 100644 --- a/arch/powerpc/platforms/pseries/firmware.c +++ b/arch/powerpc/platforms/pseries/firmware.c @@ -59,6 +59,7 @@ firmware_features_table[FIRMWARE_MAX_FEATURES] = { {FW_FEATURE_XDABR, "hcall-xdabr"}, {FW_FEATURE_MULTITCE, "hcall-multi-tce"}, {FW_FEATURE_SPLPAR, "hcall-splpar"}, + {FW_FEATURE_BULK_REMOVE, "hcall-bulk"}, }; /* Build up the firmware features bitmask using the contents of diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c index 5a684fbd8f27..7496005566ef 100644 --- a/arch/powerpc/platforms/pseries/lpar.c +++ b/arch/powerpc/platforms/pseries/lpar.c @@ -516,7 +516,7 @@ static void pSeries_lpar_hpte_invalidate(unsigned long slot, unsigned long va, static void pSeries_lpar_flush_hash_range(unsigned long number, int local) { unsigned long i, pix, rc; - unsigned long flags; + unsigned long flags = 0; struct ppc64_tlb_batch *batch = &__get_cpu_var(ppc64_tlb_batch); int lock_tlbie = !cpu_has_feature(CPU_FTR_LOCKLESS_TLBIE); unsigned long param[9]; @@ -540,16 +540,22 @@ static void pSeries_lpar_flush_hash_range(unsigned long number, int local) hash = ~hash; slot = (hash & htab_hash_mask) * HPTES_PER_GROUP; slot += hidx & _PTEIDX_GROUP_IX; - param[pix] = HBR_REQUEST | HBR_AVPN | slot; - param[pix+1] = hpte_encode_v(va, psize) & HPTE_V_AVPN; - pix += 2; - if (pix == 8) { - rc = plpar_hcall9(H_BULK_REMOVE, param, + if (!firmware_has_feature(FW_FEATURE_BULK_REMOVE)) { + pSeries_lpar_hpte_invalidate(slot, va, psize, + local); + } else { + param[pix] = HBR_REQUEST | HBR_AVPN | slot; + param[pix+1] = hpte_encode_v(va, psize) & + HPTE_V_AVPN; + pix += 2; + if (pix == 8) { + rc = plpar_hcall9(H_BULK_REMOVE, param, param[0], param[1], param[2], param[3], param[4], param[5], param[6], param[7]); - BUG_ON(rc != H_SUCCESS); - pix = 0; + BUG_ON(rc != H_SUCCESS); + pix = 0; + } } } pte_iterate_hashed_end(); } -- cgit v1.2.3 From f42963f8646540ac7e5ba016a0ec1cc2e7386b57 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Tue, 12 Dec 2006 15:13:19 -0700 Subject: [POWERPC] Add mpc52xx/lite5200 PCI support Signed-off-by: Grant Likely Acked-by: Sylvain Munaut Signed-off-by: Paul Mackerras --- arch/powerpc/Kconfig | 17 +- arch/powerpc/platforms/52xx/Makefile | 1 + arch/powerpc/platforms/52xx/lite5200.c | 6 + arch/powerpc/platforms/52xx/mpc52xx_pci.c | 412 ++++++++++++++++++++++++++++++ 4 files changed, 435 insertions(+), 1 deletion(-) create mode 100644 arch/powerpc/platforms/52xx/mpc52xx_pci.c (limited to 'arch') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 0b6325a77c75..abc6bd2f858e 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -436,6 +436,21 @@ config PPC_MPC52xx bool default n +config PPC_MPC5200 + bool + select PPC_MPC52xx + default n + +config PPC_MPC5200_BUGFIX + bool "MPC5200 (L25R) bugfix support" + depends on PPC_MPC5200 + default n + help + Enable workarounds for original MPC5200 errata. This is not required + for MPC5200B based boards. + + It is safe to say 'Y' here + config PPC_EFIKA bool "bPlan Efika 5k2. MPC5200B based computer" depends on PPC_MULTIPLATFORM && PPC32 @@ -448,7 +463,7 @@ config PPC_EFIKA config PPC_LITE5200 bool "Freescale Lite5200 Eval Board" depends on PPC_MULTIPLATFORM && PPC32 - select PPC_MPC52xx + select PPC_MPC5200 default n config PPC_PMAC diff --git a/arch/powerpc/platforms/52xx/Makefile b/arch/powerpc/platforms/52xx/Makefile index a46184a0c750..795b713ec9ee 100644 --- a/arch/powerpc/platforms/52xx/Makefile +++ b/arch/powerpc/platforms/52xx/Makefile @@ -3,6 +3,7 @@ # ifeq ($(CONFIG_PPC_MERGE),y) obj-y += mpc52xx_pic.o mpc52xx_common.o +obj-$(CONFIG_PCI) += mpc52xx_pci.o endif obj-$(CONFIG_PPC_EFIKA) += efika-setup.o efika-pci.o diff --git a/arch/powerpc/platforms/52xx/lite5200.c b/arch/powerpc/platforms/52xx/lite5200.c index 0f21bab33f6c..cdb16bfa6ca6 100644 --- a/arch/powerpc/platforms/52xx/lite5200.c +++ b/arch/powerpc/platforms/52xx/lite5200.c @@ -107,6 +107,12 @@ static void __init lite52xx_setup_arch(void) mpc52xx_setup_cpu(); /* Generic */ lite52xx_setup_cpu(); /* Platorm specific */ +#ifdef CONFIG_PCI + np = of_find_node_by_type(np, "pci"); + if (np) + mpc52xx_add_bridge(np); +#endif + #ifdef CONFIG_BLK_DEV_INITRD if (initrd_start) ROOT_DEV = Root_RAM0; diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pci.c b/arch/powerpc/platforms/52xx/mpc52xx_pci.c new file mode 100644 index 000000000000..faf161bdbc1c --- /dev/null +++ b/arch/powerpc/platforms/52xx/mpc52xx_pci.c @@ -0,0 +1,412 @@ +/* + * PCI code for the Freescale MPC52xx embedded CPU. + * + * Copyright (C) 2006 Secret Lab Technologies Ltd. + * Grant Likely + * Copyright (C) 2004 Sylvain Munaut + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#undef DEBUG + +#include +#include +#include +#include +#include + + +/* ======================================================================== */ +/* PCI windows config */ +/* ======================================================================== */ + +#define MPC52xx_PCI_TARGET_IO 0xf0000000 +#define MPC52xx_PCI_TARGET_MEM 0x00000000 + + +/* ======================================================================== */ +/* Structures mapping & Defines for PCI Unit */ +/* ======================================================================== */ + +#define MPC52xx_PCI_GSCR_BM 0x40000000 +#define MPC52xx_PCI_GSCR_PE 0x20000000 +#define MPC52xx_PCI_GSCR_SE 0x10000000 +#define MPC52xx_PCI_GSCR_XLB2PCI_MASK 0x07000000 +#define MPC52xx_PCI_GSCR_XLB2PCI_SHIFT 24 +#define MPC52xx_PCI_GSCR_IPG2PCI_MASK 0x00070000 +#define MPC52xx_PCI_GSCR_IPG2PCI_SHIFT 16 +#define MPC52xx_PCI_GSCR_BME 0x00004000 +#define MPC52xx_PCI_GSCR_PEE 0x00002000 +#define MPC52xx_PCI_GSCR_SEE 0x00001000 +#define MPC52xx_PCI_GSCR_PR 0x00000001 + + +#define MPC52xx_PCI_IWBTAR_TRANSLATION(proc_ad,pci_ad,size) \ + ( ( (proc_ad) & 0xff000000 ) | \ + ( (((size) - 1) >> 8) & 0x00ff0000 ) | \ + ( ((pci_ad) >> 16) & 0x0000ff00 ) ) + +#define MPC52xx_PCI_IWCR_PACK(win0,win1,win2) (((win0) << 24) | \ + ((win1) << 16) | \ + ((win2) << 8)) + +#define MPC52xx_PCI_IWCR_DISABLE 0x0 +#define MPC52xx_PCI_IWCR_ENABLE 0x1 +#define MPC52xx_PCI_IWCR_READ 0x0 +#define MPC52xx_PCI_IWCR_READ_LINE 0x2 +#define MPC52xx_PCI_IWCR_READ_MULTI 0x4 +#define MPC52xx_PCI_IWCR_MEM 0x0 +#define MPC52xx_PCI_IWCR_IO 0x8 + +#define MPC52xx_PCI_TCR_P 0x01000000 +#define MPC52xx_PCI_TCR_LD 0x00010000 + +#define MPC52xx_PCI_TBATR_DISABLE 0x0 +#define MPC52xx_PCI_TBATR_ENABLE 0x1 + +struct mpc52xx_pci { + u32 idr; /* PCI + 0x00 */ + u32 scr; /* PCI + 0x04 */ + u32 ccrir; /* PCI + 0x08 */ + u32 cr1; /* PCI + 0x0C */ + u32 bar0; /* PCI + 0x10 */ + u32 bar1; /* PCI + 0x14 */ + u8 reserved1[16]; /* PCI + 0x18 */ + u32 ccpr; /* PCI + 0x28 */ + u32 sid; /* PCI + 0x2C */ + u32 erbar; /* PCI + 0x30 */ + u32 cpr; /* PCI + 0x34 */ + u8 reserved2[4]; /* PCI + 0x38 */ + u32 cr2; /* PCI + 0x3C */ + u8 reserved3[32]; /* PCI + 0x40 */ + u32 gscr; /* PCI + 0x60 */ + u32 tbatr0; /* PCI + 0x64 */ + u32 tbatr1; /* PCI + 0x68 */ + u32 tcr; /* PCI + 0x6C */ + u32 iw0btar; /* PCI + 0x70 */ + u32 iw1btar; /* PCI + 0x74 */ + u32 iw2btar; /* PCI + 0x78 */ + u8 reserved4[4]; /* PCI + 0x7C */ + u32 iwcr; /* PCI + 0x80 */ + u32 icr; /* PCI + 0x84 */ + u32 isr; /* PCI + 0x88 */ + u32 arb; /* PCI + 0x8C */ + u8 reserved5[104]; /* PCI + 0x90 */ + u32 car; /* PCI + 0xF8 */ + u8 reserved6[4]; /* PCI + 0xFC */ +}; + + +/* ======================================================================== */ +/* PCI configuration acess */ +/* ======================================================================== */ + +static int +mpc52xx_pci_read_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 *val) +{ + struct pci_controller *hose = bus->sysdata; + u32 value; + + if (ppc_md.pci_exclude_device) + if (ppc_md.pci_exclude_device(bus->number, devfn)) + return PCIBIOS_DEVICE_NOT_FOUND; + + out_be32(hose->cfg_addr, + (1 << 31) | + ((bus->number - hose->bus_offset) << 16) | + (devfn << 8) | + (offset & 0xfc)); + mb(); + +#if defined(CONFIG_PPC_MPC5200_BUGFIX) + if (bus->number != hose->bus_offset) { + /* workaround for the bug 435 of the MPC5200 (L25R); + * Don't do 32 bits config access during type-1 cycles */ + switch (len) { + case 1: + value = in_8(((u8 __iomem *)hose->cfg_data) + + (offset & 3)); + break; + case 2: + value = in_le16(((u16 __iomem *)hose->cfg_data) + + ((offset>>1) & 1)); + break; + + default: + value = in_le16((u16 __iomem *)hose->cfg_data) | + (in_le16(((u16 __iomem *)hose->cfg_data) + 1) << 16); + break; + } + } + else +#endif + { + value = in_le32(hose->cfg_data); + + if (len != 4) { + value >>= ((offset & 0x3) << 3); + value &= 0xffffffff >> (32 - (len << 3)); + } + } + + *val = value; + + out_be32(hose->cfg_addr, 0); + mb(); + + return PCIBIOS_SUCCESSFUL; +} + +static int +mpc52xx_pci_write_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 val) +{ + struct pci_controller *hose = bus->sysdata; + u32 value, mask; + + if (ppc_md.pci_exclude_device) + if (ppc_md.pci_exclude_device(bus->number, devfn)) + return PCIBIOS_DEVICE_NOT_FOUND; + + out_be32(hose->cfg_addr, + (1 << 31) | + ((bus->number - hose->bus_offset) << 16) | + (devfn << 8) | + (offset & 0xfc)); + mb(); + +#if defined(CONFIG_PPC_MPC5200_BUGFIX) + if (bus->number != hose->bus_offset) { + /* workaround for the bug 435 of the MPC5200 (L25R); + * Don't do 32 bits config access during type-1 cycles */ + switch (len) { + case 1: + out_8(((u8 __iomem *)hose->cfg_data) + + (offset & 3), val); + break; + case 2: + out_le16(((u16 __iomem *)hose->cfg_data) + + ((offset>>1) & 1), val); + break; + + default: + out_le16((u16 __iomem *)hose->cfg_data, + (u16)val); + out_le16(((u16 __iomem *)hose->cfg_data) + 1, + (u16)(val>>16)); + break; + } + } + else +#endif + { + if (len != 4) { + value = in_le32(hose->cfg_data); + + offset = (offset & 0x3) << 3; + mask = (0xffffffff >> (32 - (len << 3))); + mask <<= offset; + + value &= ~mask; + val = value | ((val << offset) & mask); + } + + out_le32(hose->cfg_data, val); + } + mb(); + + out_be32(hose->cfg_addr, 0); + mb(); + + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops mpc52xx_pci_ops = { + .read = mpc52xx_pci_read_config, + .write = mpc52xx_pci_write_config +}; + + +/* ======================================================================== */ +/* PCI setup */ +/* ======================================================================== */ + +static void __init +mpc52xx_pci_setup(struct pci_controller *hose, + struct mpc52xx_pci __iomem *pci_regs) +{ + struct resource *res; + u32 tmp; + int iwcr0 = 0, iwcr1 = 0, iwcr2 = 0; + + pr_debug("mpc52xx_pci_setup(hose=%p, pci_regs=%p)\n", hose, pci_regs); + + /* pci_process_bridge_OF_ranges() found all our addresses for us; + * now store them in the right places */ + hose->cfg_addr = &pci_regs->car; + hose->cfg_data = hose->io_base_virt; + + /* Control regs */ + tmp = in_be32(&pci_regs->scr); + tmp |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + out_be32(&pci_regs->scr, tmp); + + /* Memory windows */ + res = &hose->mem_resources[0]; + if (res->flags) { + pr_debug("mem_resource[0] = {.start=%x, .end=%x, .flags=%lx}\n", + res->start, res->end, res->flags); + out_be32(&pci_regs->iw0btar, + MPC52xx_PCI_IWBTAR_TRANSLATION(res->start, res->start, + res->end - res->start + 1)); + iwcr0 = MPC52xx_PCI_IWCR_ENABLE | MPC52xx_PCI_IWCR_MEM; + if (res->flags & IORESOURCE_PREFETCH) + iwcr0 |= MPC52xx_PCI_IWCR_READ_MULTI; + else + iwcr0 |= MPC52xx_PCI_IWCR_READ; + } + + res = &hose->mem_resources[1]; + if (res->flags) { + pr_debug("mem_resource[1] = {.start=%x, .end=%x, .flags=%lx}\n", + res->start, res->end, res->flags); + out_be32(&pci_regs->iw1btar, + MPC52xx_PCI_IWBTAR_TRANSLATION(res->start, res->start, + res->end - res->start + 1)); + iwcr1 = MPC52xx_PCI_IWCR_ENABLE | MPC52xx_PCI_IWCR_MEM; + if (res->flags & IORESOURCE_PREFETCH) + iwcr1 |= MPC52xx_PCI_IWCR_READ_MULTI; + else + iwcr1 |= MPC52xx_PCI_IWCR_READ; + } + + /* IO resources */ + res = &hose->io_resource; + if (!res) { + printk(KERN_ERR "%s: Didn't find IO resources\n", __FILE__); + return; + } + pr_debug(".io_resource={.start=%x,.end=%x,.flags=%lx} " + ".io_base_phys=0x%p\n", + res->start, res->end, res->flags, (void*)hose->io_base_phys); + out_be32(&pci_regs->iw2btar, + MPC52xx_PCI_IWBTAR_TRANSLATION(hose->io_base_phys, + res->start, + res->end - res->start + 1)); + iwcr2 = MPC52xx_PCI_IWCR_ENABLE | MPC52xx_PCI_IWCR_IO; + + /* Set all the IWCR fields at once; they're in the same reg */ + out_be32(&pci_regs->iwcr, MPC52xx_PCI_IWCR_PACK(iwcr0, iwcr1, iwcr2)); + + out_be32(&pci_regs->tbatr0, + MPC52xx_PCI_TBATR_ENABLE | MPC52xx_PCI_TARGET_IO ); + out_be32(&pci_regs->tbatr1, + MPC52xx_PCI_TBATR_ENABLE | MPC52xx_PCI_TARGET_MEM ); + + out_be32(&pci_regs->tcr, MPC52xx_PCI_TCR_LD); + + tmp = in_be32(&pci_regs->gscr); +#if 0 + /* Reset the exteral bus ( internal PCI controller is NOT resetted ) */ + /* Not necessary and can be a bad thing if for example the bootloader + is displaying a splash screen or ... Just left here for + documentation purpose if anyone need it */ + out_be32(&pci_regs->gscr, tmp | MPC52xx_PCI_GSCR_PR); + udelay(50); +#endif + + /* Make sure the PCI bridge is out of reset */ + out_be32(&pci_regs->gscr, tmp & ~MPC52xx_PCI_GSCR_PR); +} + +static void +mpc52xx_pci_fixup_resources(struct pci_dev *dev) +{ + int i; + + pr_debug("mpc52xx_pci_fixup_resources() %.4x:%.4x\n", + dev->vendor, dev->device); + + /* We don't rely on boot loader for PCI and resets all + devices */ + for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { + struct resource *res = &dev->resource[i]; + if (res->end > res->start) { /* Only valid resources */ + res->end -= res->start; + res->start = 0; + res->flags |= IORESOURCE_UNSET; + } + } + + /* The PCI Host bridge of MPC52xx has a prefetch memory resource + fixed to 1Gb. Doesn't fit in the resource system so we remove it */ + if ( (dev->vendor == PCI_VENDOR_ID_MOTOROLA) && + ( dev->device == PCI_DEVICE_ID_MOTOROLA_MPC5200 + || dev->device == PCI_DEVICE_ID_MOTOROLA_MPC5200B) ) { + struct resource *res = &dev->resource[1]; + res->start = res->end = res->flags = 0; + } +} + +int __init +mpc52xx_add_bridge(struct device_node *node) +{ + int len; + struct mpc52xx_pci __iomem *pci_regs; + struct pci_controller *hose; + const int *bus_range; + struct resource rsrc; + + pr_debug("Adding MPC52xx PCI host bridge %s\n", node->full_name); + + pci_assign_all_buses = 1; + + if (of_address_to_resource(node, 0, &rsrc) != 0) { + printk(KERN_ERR "Can't get %s resources\n", node->full_name); + return -EINVAL; + } + + bus_range = get_property(node, "bus-range", &len); + if (bus_range == NULL || len < 2 * sizeof(int)) { + printk(KERN_WARNING "Can't get %s bus-range, assume bus 0\n", + node->full_name); + bus_range = NULL; + } + + /* There are some PCI quirks on the 52xx, register the hook to + * fix them. */ + ppc_md.pcibios_fixup_resources = mpc52xx_pci_fixup_resources; + + /* Alloc and initialize the pci controller. Values in the device + * tree are needed to configure the 52xx PCI controller. Rather + * than parse the tree here, let pci_process_bridge_OF_ranges() + * do it for us and extract the values after the fact */ + hose = pcibios_alloc_controller(); + if (!hose) + return -ENOMEM; + + hose->arch_data = node; + hose->set_cfg_type = 1; + + hose->first_busno = bus_range ? bus_range[0] : 0; + hose->last_busno = bus_range ? bus_range[1] : 0xff; + + hose->bus_offset = 0; + hose->ops = &mpc52xx_pci_ops; + + pci_regs = ioremap(rsrc.start, rsrc.end - rsrc.start + 1); + if (!pci_regs) + return -ENOMEM; + + pci_process_bridge_OF_ranges(hose, node, 1); + + /* Finish setting up PCI using values obtained by + * pci_proces_bridge_OF_ranges */ + mpc52xx_pci_setup(hose, pci_regs); + + return 0; +} -- cgit v1.2.3 From 64a3de1c3d9c6dfa9be68529a519448e8017ddb0 Mon Sep 17 00:00:00 2001 From: Mariusz Kozlowski Date: Mon, 5 Feb 2007 16:14:03 -0800 Subject: [POWERPC] ppc: cs4218_tdm remove extra brace Signed-off-by: Mariusz Kozlowski Signed-off-by: Andrew Morton Signed-off-by: Paul Mackerras --- arch/ppc/8xx_io/cs4218_tdm.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/ppc/8xx_io/cs4218_tdm.c b/arch/ppc/8xx_io/cs4218_tdm.c index b7bb5f0b3c5f..684ed04eb8b8 100644 --- a/arch/ppc/8xx_io/cs4218_tdm.c +++ b/arch/ppc/8xx_io/cs4218_tdm.c @@ -1379,7 +1379,6 @@ static void cs_nosound(unsigned long xx) } static DEFINE_TIMER(beep_timer, cs_nosound, 0, 0); -}; static void cs_mksound(unsigned int hz, unsigned int ticks) { -- cgit v1.2.3 From f8b93a902315aeeedf51c45f01a407d5d8288c72 Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Mon, 5 Feb 2007 16:14:04 -0800 Subject: [POWERPC] ppc: use syslog macro for the printk log level Use the appropriate logging macro for the priority level for that printk call. Signed-off-by: Robert P. J. Day Signed-off-by: Andrew Morton Signed-off-by: Paul Mackerras --- arch/ppc/syslib/m8260_pci_erratum9.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/ppc/syslib/m8260_pci_erratum9.c b/arch/ppc/syslib/m8260_pci_erratum9.c index 5475709ce07b..ebb8c8f8f30c 100644 --- a/arch/ppc/syslib/m8260_pci_erratum9.c +++ b/arch/ppc/syslib/m8260_pci_erratum9.c @@ -105,7 +105,8 @@ void idma_pci9_init(void) idma_reg[IDMA_CHAN].idmr = 0; /* mask all IDMA interrupts */ idma_reg[IDMA_CHAN].idsr = 0xff; /* clear all event flags */ - printk("<4>Using IDMA%d for MPC8260 device erratum PCI 9 workaround\n", + printk(KERN_WARNING + "Using IDMA%d for MPC8260 device erratum PCI 9 workaround\n", IDMA_CHAN + 1); return; -- cgit v1.2.3 From 0524aad7b89671bc788d483b2c048ac7b79eefb9 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Mon, 5 Feb 2007 16:14:05 -0800 Subject: [POWERPC] Fix ppc64's writing to struct file_operations In preparation for marking file_operations as const. Cc: Benjamin Herrenschmidt Acked-by: Arjan van de Ven Signed-off-by: Stephen Rothwell Signed-off-by: Andrew Morton Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/lparcfg.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c index 41c05dcd68f4..0de5a08cf9b0 100644 --- a/arch/powerpc/kernel/lparcfg.c +++ b/arch/powerpc/kernel/lparcfg.c @@ -439,6 +439,10 @@ static ssize_t lparcfg_write(struct file *file, const char __user * buf, ssize_t retval = -ENOMEM; + if (!firmware_has_feature(FW_FEATURE_SPLPAR) || + firmware_has_feature(FW_FEATURE_ISERIES)) + return -EINVAL; + kbuf = kmalloc(count, GFP_KERNEL); if (!kbuf) goto out; @@ -517,7 +521,7 @@ static int pseries_lparcfg_data(struct seq_file *m, void *v) static ssize_t lparcfg_write(struct file *file, const char __user * buf, size_t count, loff_t * off) { - return count; + return -EINVAL; } #endif /* CONFIG_PPC_PSERIES */ @@ -570,6 +574,7 @@ static int lparcfg_open(struct inode *inode, struct file *file) struct file_operations lparcfg_fops = { .owner = THIS_MODULE, .read = seq_read, + .write = lparcfg_write, .open = lparcfg_open, .release = single_release, }; @@ -581,10 +586,8 @@ int __init lparcfg_init(void) /* Allow writing if we have FW_FEATURE_SPLPAR */ if (firmware_has_feature(FW_FEATURE_SPLPAR) && - !firmware_has_feature(FW_FEATURE_ISERIES)) { - lparcfg_fops.write = lparcfg_write; + !firmware_has_feature(FW_FEATURE_ISERIES)) mode |= S_IWUSR; - } ent = create_proc_entry("ppc64/lparcfg", mode, NULL); if (ent) { -- cgit v1.2.3 From 3839a5943977674d224cca541fd0914b942aa466 Mon Sep 17 00:00:00 2001 From: "Ahmed S. Darwish" Date: Mon, 5 Feb 2007 16:14:09 -0800 Subject: [POWERPC] Use ARRAY_SIZE macro when appropriate Use ARRAY_SIZE macro already defined in linux/kernel.h Signed-off-by: Ahmed S. Darwish Cc: Benjamin Herrenschmidt Signed-off-by: Andrew Morton Signed-off-by: Paul Mackerras --- arch/powerpc/lib/rheap.c | 3 ++- arch/powerpc/xmon/ppc-opc.c | 7 +++---- arch/powerpc/xmon/spu-opc.c | 4 ++-- 3 files changed, 7 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/lib/rheap.c b/arch/powerpc/lib/rheap.c index 4bbda6b2be45..6c5c5dd183ee 100644 --- a/arch/powerpc/lib/rheap.c +++ b/arch/powerpc/lib/rheap.c @@ -14,6 +14,7 @@ */ #include #include +#include #include #include @@ -671,7 +672,7 @@ void rh_dump(rh_info_t * info) int maxnr; int i, nr; - maxnr = sizeof(st) / sizeof(st[0]); + maxnr = ARRAY_SIZE(st); printk(KERN_INFO "info @0x%p (%d slots empty / %d max)\n", diff --git a/arch/powerpc/xmon/ppc-opc.c b/arch/powerpc/xmon/ppc-opc.c index 5d841f4b3530..af3780e52e76 100644 --- a/arch/powerpc/xmon/ppc-opc.c +++ b/arch/powerpc/xmon/ppc-opc.c @@ -21,6 +21,7 @@ 02110-1301, USA. */ #include +#include #include "nonstdio.h" #include "ppc.h" @@ -4932,8 +4933,7 @@ const struct powerpc_opcode powerpc_opcodes[] = { }; -const int powerpc_num_opcodes = - sizeof (powerpc_opcodes) / sizeof (powerpc_opcodes[0]); +const int powerpc_num_opcodes = ARRAY_SIZE(powerpc_opcodes); /* The macro table. This is only used by the assembler. */ @@ -4989,5 +4989,4 @@ const struct powerpc_macro powerpc_macros[] = { { "clrlslwi.",4, PPCCOM, "rlwinm. %0,%1,%3,(%2)-(%3),31-(%3)" }, }; -const int powerpc_num_macros = - sizeof (powerpc_macros) / sizeof (powerpc_macros[0]); +const int powerpc_num_macros = ARRAY_SIZE(powerpc_macros); diff --git a/arch/powerpc/xmon/spu-opc.c b/arch/powerpc/xmon/spu-opc.c index efffde9edc6e..530df3d6d7b2 100644 --- a/arch/powerpc/xmon/spu-opc.c +++ b/arch/powerpc/xmon/spu-opc.c @@ -18,6 +18,7 @@ with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. */ +#include #include "spu.h" /* This file holds the Spu opcode table */ @@ -40,5 +41,4 @@ const struct spu_opcode spu_opcodes[] = { #undef APUOPFB }; -const int spu_num_opcodes = - sizeof (spu_opcodes) / sizeof (spu_opcodes[0]); +const int spu_num_opcodes = ARRAY_SIZE(spu_opcodes); -- cgit v1.2.3 From 2366fb16abcd8dea96820d3cb4f1de3a868d268c Mon Sep 17 00:00:00 2001 From: "Ahmed S. Darwish" Date: Mon, 5 Feb 2007 16:14:10 -0800 Subject: [POWERPC] PPC: Use ARRAY_SIZE macro when appropriate Use ARRAY_SIZE macro already defined in linux/kernel.h Signed-off-by: Ahmed S. Darwish Cc: Benjamin Herrenschmidt Acked-by: Kumar Gala Signed-off-by: Andrew Morton Signed-off-by: Paul Mackerras --- arch/ppc/lib/rheap.c | 3 ++- arch/ppc/syslib/m8xx_setup.c | 2 +- arch/ppc/xmon/ppc-opc.c | 7 +++---- 3 files changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/ppc/lib/rheap.c b/arch/ppc/lib/rheap.c index 31e511856dc5..d40700795a9c 100644 --- a/arch/ppc/lib/rheap.c +++ b/arch/ppc/lib/rheap.c @@ -14,6 +14,7 @@ */ #include #include +#include #include #include @@ -654,7 +655,7 @@ void rh_dump(rh_info_t * info) int maxnr; int i, nr; - maxnr = sizeof(st) / sizeof(st[0]); + maxnr = ARRAY_SIZE(st); printk(KERN_INFO "info @0x%p (%d slots empty / %d max)\n", diff --git a/arch/ppc/syslib/m8xx_setup.c b/arch/ppc/syslib/m8xx_setup.c index d8d299bd1a12..01e48d88f22d 100644 --- a/arch/ppc/syslib/m8xx_setup.c +++ b/arch/ppc/syslib/m8xx_setup.c @@ -77,7 +77,7 @@ static struct mtd_partition mpc8xxads_partitions[] = { } }; -#define mpc8xxads_part_num (sizeof (mpc8xxads_partitions) / sizeof (mpc8xxads_partitions[0])) +#define mpc8xxads_part_num ARRAY_SIZE(mpc8xxads_partitions) #endif diff --git a/arch/ppc/xmon/ppc-opc.c b/arch/ppc/xmon/ppc-opc.c index 533a6c9973d4..034313cef6e7 100644 --- a/arch/ppc/xmon/ppc-opc.c +++ b/arch/ppc/xmon/ppc-opc.c @@ -19,6 +19,7 @@ along with this file; see the file COPYING. If not, write to the Free Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #include +#include #include "ansidecl.h" #include "ppc.h" @@ -2669,8 +2670,7 @@ const struct powerpc_opcode powerpc_opcodes[] = { }; -const int powerpc_num_opcodes = - sizeof (powerpc_opcodes) / sizeof (powerpc_opcodes[0]); +const int powerpc_num_opcodes = ARRAY_SIZE(powerpc_opcodes); /* The macro table. This is only used by the assembler. */ @@ -2717,5 +2717,4 @@ const struct powerpc_macro powerpc_macros[] = { }; -const int powerpc_num_macros = - sizeof (powerpc_macros) / sizeof (powerpc_macros[0]); +const int powerpc_num_macros = ARRAY_SIZE(powerpc_macros); -- cgit v1.2.3 From 92d4dda3332577bc2228b8d436f3d2796c59a520 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 13 Dec 2006 13:38:22 +0100 Subject: [POWERPC] Fix comment in kernel/irq.c kernel/irq.c contains a comment that speaks of -1 and -2 as interrupt numbers, but this is actually dependent on configuration options now. Replace by NO_IRQ and NO_IRQ_ENABLED. Signed-off-by: Johannes Berg Cc: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/irq.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 34dc37e0e369..919fbf568495 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -281,10 +281,10 @@ void do_IRQ(struct pt_regs *regs) /* * Every platform is required to implement ppc_md.get_irq. - * This function will either return an irq number or -1 to + * This function will either return an irq number or NO_IRQ to * indicate there are no more pending. - * The value -2 is for buggy hardware and means that this IRQ - * has already been handled. -- Tom + * The value NO_IRQ_IGNORE is for buggy hardware and means that this + * IRQ has already been handled. -- Tom */ irq = ppc_md.get_irq(); -- cgit v1.2.3 From bcff4948c64e1af09e9a986e324626ee873d3a07 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 7 Feb 2007 13:45:45 +0100 Subject: [POWERPC] Remove bogus comment about page_is_ram arch/powerpc/mm/mem.c states that page_is_ram is called by the code that implements /dev/mem, which isn't true. Remove the comment. Signed-off-by: Johannes Berg Cc: Paul Mackerras Signed-off-by: Paul Mackerras --- arch/powerpc/mm/mem.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index c85eda63d2b3..77b4637097e9 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -61,10 +61,6 @@ unsigned long memory_limit; extern void hash_preload(struct mm_struct *mm, unsigned long ea, unsigned long access, unsigned long trap); -/* - * This is called by /dev/mem to know if a given address has to - * be mapped non-cacheable or not - */ int page_is_ram(unsigned long pfn) { unsigned long paddr = (pfn << PAGE_SHIFT); -- cgit v1.2.3 From d003e7a1a569501cbe9a5ca14748177498c4893a Mon Sep 17 00:00:00 2001 From: Mathieu Desnoyers Date: Wed, 7 Feb 2007 19:04:44 -0500 Subject: [POWERPC] Add export of vgacon_remap_base The following macro : include/asm-powerpc/vga.h:#define VGA_MAP_MEM(x,s) (x + vgacon_remap_base) is used by drivers/video/console/vgacon.c which can be compiled as a module (drivers/video/vga16fb.ko). Therefore, vgacon_remap_base should be exported. Signed-off-by: Mathieu Desnoyers Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/setup_32.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index 61c65d19ef06..6a19fa40dcee 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -65,6 +65,7 @@ int have_of = 1; #ifdef CONFIG_VGA_CONSOLE unsigned long vgacon_remap_base; +EXPORT_SYMBOL(vgacon_remap_base); #endif /* -- cgit v1.2.3 From b359049f270dcaab8a5bbdbb966594c16caba16c Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Wed, 7 Feb 2007 22:19:12 -0600 Subject: [POWERPC] 83xx: Add base support for the MPC8313E RDB Add support for the MPC8313E Reference Development Board (RDB). The board is a mini-ITX reference board with 128M DDR2, 8M flash, 32M NAND, USB, PCI, gigabit ethernet, and serial. Signed-off-by: Wilson Lo Signed-off-by: Scott Wood Signed-off-by: Kim Phillips Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8313erdb.dts | 219 ++++++++++++++++++++++++++++++ arch/powerpc/platforms/83xx/Kconfig | 12 ++ arch/powerpc/platforms/83xx/Makefile | 1 + arch/powerpc/platforms/83xx/mpc8313_rdb.c | 99 ++++++++++++++ 4 files changed, 331 insertions(+) create mode 100644 arch/powerpc/boot/dts/mpc8313erdb.dts create mode 100644 arch/powerpc/platforms/83xx/mpc8313_rdb.c (limited to 'arch') diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts new file mode 100644 index 000000000000..3d2f5a06df3f --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8313erdb.dts @@ -0,0 +1,219 @@ +/* + * MPC8313E RDB Device Tree Source + * + * Copyright 2005, 2006, 2007 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/ { + model = "MPC8313ERDB"; + compatible = "MPC83xx"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8313@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <4000>; // L1, 16K + i-cache-size = <4000>; // L1, 16K + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + 32-bit; + }; + }; + + memory { + device_type = "memory"; + reg = <00000000 08000000>; // 128MB at 0 + }; + + soc8313@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 e0000000 00100000>; + reg = ; + bus-frequency = <0>; + + wdt@200 { + device_type = "watchdog"; + compatible = "mpc83xx_wdt"; + reg = <200 100>; + }; + + i2c@3000 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3000 100>; + interrupts = ; + interrupt-parent = <700>; + dfsrr; + }; + + i2c@3100 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3100 100>; + interrupts = ; + interrupt-parent = <700>; + dfsrr; + }; + + spi@7000 { + device_type = "spi"; + compatible = "mpc83xx_spi"; + reg = <7000 1000>; + interrupts = <10 8>; + interrupt-parent = <700>; + mode = <0>; + }; + + /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ + usb@23000 { + device_type = "usb"; + compatible = "fsl-usb2-dr"; + reg = <23000 1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <700>; + interrupts = <26 2>; + phy_type = "utmi_wide"; + }; + + mdio@24520 { + device_type = "mdio"; + compatible = "gianfar"; + reg = <24520 20>; + #address-cells = <1>; + #size-cells = <0>; + linux,phandle = <24520>; + ethernet-phy@1 { + linux,phandle = <2452001>; + interrupt-parent = <700>; + interrupts = <13 2>; + reg = <1>; + device_type = "ethernet-phy"; + }; + ethernet-phy@4 { + linux,phandle = <2452004>; + interrupt-parent = <700>; + interrupts = <14 2>; + reg = <4>; + device_type = "ethernet-phy"; + }; + }; + + ethernet@24000 { + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <24000 1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <25 8 24 8 23 8>; + interrupt-parent = <700>; + phy-handle = <2452001>; + }; + + ethernet@25000 { + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <25000 1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <22 8 21 8 20 8>; + interrupt-parent = <700>; + phy-handle = <2452004>; + }; + + serial@4500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4500 100>; + clock-frequency = <0>; + interrupts = <9 8>; + interrupt-parent = <700>; + }; + + serial@4600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4600 100>; + clock-frequency = <0>; + interrupts = ; + interrupt-parent = <700>; + }; + + pci@8500 { + interrupt-map-mask = ; + interrupt-map = < + + /* IDSEL 0x0E -mini PCI */ + 7000 0 0 1 700 12 8 + 7000 0 0 2 700 12 8 + 7000 0 0 3 700 12 8 + 7000 0 0 4 700 12 8 + + /* IDSEL 0x0F - PCI slot */ + 7800 0 0 1 700 11 8 + 7800 0 0 2 700 12 8 + 7800 0 0 3 700 11 8 + 7800 0 0 4 700 12 8>; + interrupt-parent = <700>; + interrupts = <42 8>; + bus-range = <0 0>; + ranges = <02000000 0 90000000 90000000 0 10000000 + 42000000 0 80000000 80000000 0 10000000 + 01000000 0 00000000 e2000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <8500 100>; + compatible = "83xx"; + device_type = "pci"; + }; + + crypto@30000 { + device_type = "crypto"; + model = "SEC2"; + compatible = "talitos"; + reg = <30000 7000>; + interrupts = ; + interrupt-parent = <700>; + /* Rev. 2.2 */ + num-channels = <1>; + channel-fifo-len = <18>; + exec-units-mask = <0000004c>; + descriptor-types-mask = <0122003f>; + }; + + /* IPIC + * interrupts cell = + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + pic@700 { + linux,phandle = <700>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <700 100>; + built-in; + device_type = "ipic"; + }; + }; +}; diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig index edcd5b875b66..46883c5136ac 100644 --- a/arch/powerpc/platforms/83xx/Kconfig +++ b/arch/powerpc/platforms/83xx/Kconfig @@ -5,6 +5,12 @@ choice prompt "Machine Type" default MPC834x_SYS +config MPC8313_RDB + bool "Freescale MPC8313 RDB" + select DEFAULT_UIMAGE + help + This option enables support for the MPC8313 RDB board. + config MPC832x_MDS bool "Freescale MPC832x MDS" select DEFAULT_UIMAGE @@ -41,6 +47,12 @@ config MPC8360E_PB endchoice +config PPC_MPC831x + bool + select PPC_UDBG_16550 + select PPC_INDIRECT_PCI + default y if MPC8313_RDB + config PPC_MPC832x bool select PPC_UDBG_16550 diff --git a/arch/powerpc/platforms/83xx/Makefile b/arch/powerpc/platforms/83xx/Makefile index f1aa7e24a938..0b732a79c0a8 100644 --- a/arch/powerpc/platforms/83xx/Makefile +++ b/arch/powerpc/platforms/83xx/Makefile @@ -3,6 +3,7 @@ # obj-y := misc.o obj-$(CONFIG_PCI) += pci.o +obj-$(CONFIG_MPC8313_RDB) += mpc8313_rdb.o obj-$(CONFIG_MPC834x_SYS) += mpc834x_sys.o obj-$(CONFIG_MPC834x_ITX) += mpc834x_itx.o obj-$(CONFIG_MPC8360E_PB) += mpc8360e_pb.o diff --git a/arch/powerpc/platforms/83xx/mpc8313_rdb.c b/arch/powerpc/platforms/83xx/mpc8313_rdb.c new file mode 100644 index 000000000000..c3b98c34eb6b --- /dev/null +++ b/arch/powerpc/platforms/83xx/mpc8313_rdb.c @@ -0,0 +1,99 @@ +/* + * arch/powerpc/platforms/83xx/mpc8313_rdb.c + * + * Description: MPC8313x RDB board specific routines. + * This file is based on mpc834x_sys.c + * Author: Lo Wlison + * + * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include + +#include +#include +#include + +#include "mpc83xx.h" + +#undef DEBUG +#ifdef DEBUG +#define DBG(fmt...) udbg_printf(fmt) +#else +#define DBG(fmt...) +#endif + +#ifndef CONFIG_PCI +unsigned long isa_io_base = 0; +unsigned long isa_mem_base = 0; +#endif + +/* ************************************************************************ + * + * Setup the architecture + * + */ +static void __init mpc8313_rdb_setup_arch(void) +{ + struct device_node *np; + + if (ppc_md.progress) + ppc_md.progress("mpc8313_rdb_setup_arch()", 0); + +#ifdef CONFIG_PCI + for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) + add_bridge(np); + + ppc_md.pci_exclude_device = mpc83xx_exclude_device; +#endif +} + +void __init mpc8313_rdb_init_IRQ(void) +{ + struct device_node *np; + + np = of_find_node_by_type(NULL, "ipic"); + if (!np) + return; + + ipic_init(np, 0); + + /* Initialize the default interrupt mapping priorities, + * in case the boot rom changed something on us. + */ + ipic_set_default_priority(); +} + +/* + * Called very early, MMU is off, device-tree isn't unflattened + */ +static int __init mpc8313_rdb_probe(void) +{ + char *model = of_get_flat_dt_prop(of_get_flat_dt_root(), + "model", NULL); + if (model == NULL) + return 0; + if (strcmp(model, "MPC8313ERDB")) + return 0; + + DBG("MPC8313 RDB found\n"); + + return 1; +} + +define_machine(mpc8313_rdb) { + .name = "MPC8313 RDB", + .probe = mpc8313_rdb_probe, + .setup_arch = mpc8313_rdb_setup_arch, + .init_IRQ = mpc8313_rdb_init_IRQ, + .get_irq = ipic_get_irq, + .restart = mpc83xx_restart, + .time_init = mpc83xx_time_init, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; -- cgit v1.2.3 From fd9aeb85273e9eb4d1a0b83487576a2e22da67fc Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Wed, 7 Feb 2007 22:19:45 -0600 Subject: [POWERPC] 83xx: add the mpc8313erdb defconfig Add the mpc8313erdb defconfig Signed-off-by: Wilson Lo Signed-off-by: Scott Wood Signed-off-by: Kim Phillips Signed-off-by: Kumar Gala --- arch/powerpc/configs/mpc8313_rdb_defconfig | 1409 ++++++++++++++++++++++++++++ 1 file changed, 1409 insertions(+) create mode 100644 arch/powerpc/configs/mpc8313_rdb_defconfig (limited to 'arch') diff --git a/arch/powerpc/configs/mpc8313_rdb_defconfig b/arch/powerpc/configs/mpc8313_rdb_defconfig new file mode 100644 index 000000000000..f87523716c44 --- /dev/null +++ b/arch/powerpc/configs/mpc8313_rdb_defconfig @@ -0,0 +1,1409 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.20 +# Wed Feb 7 22:08:04 2007 +# +# CONFIG_PPC64 is not set +CONFIG_PPC32=y +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +CONFIG_DEFAULT_UIMAGE=y + +# +# Processor support +# +# CONFIG_CLASSIC32 is not set +# CONFIG_PPC_82xx is not set +CONFIG_PPC_83xx=y +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_86xx is not set +# CONFIG_PPC_8xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_6xx=y +CONFIG_83xx=y +CONFIG_PPC_FPU=y +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_PPC_STD_MMU=y +CONFIG_PPC_STD_MMU_32=y +# CONFIG_SMP is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +# CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +# CONFIG_EPOLL is not set +CONFIG_SHMEM=y +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_PPC_GEN550=y +# CONFIG_WANT_EARLY_SERIAL is not set + +# +# Platform support +# +CONFIG_MPC8313_RDB=y +# CONFIG_MPC832x_MDS is not set +# CONFIG_MPC834x_SYS is not set +# CONFIG_MPC834x_ITX is not set +# CONFIG_MPC8360E_PB is not set +CONFIG_PPC_MPC831x=y +# CONFIG_MPIC is not set + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_GENERIC_ISA_DMA=y +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_FSL_SOC=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PCIEPORTBUS is not set +# CONFIG_PCI_DEBUG is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_BOOT_LOAD=0x00800000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +# CONFIG_MTD_PARTITIONS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +# CONFIG_MTD_BLKDEVS is not set +# CONFIG_MTD_BLOCK is not set +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0xfe000000 +CONFIG_MTD_PHYSMAP_LEN=0x1000000 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_PHYSMAP_OF is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_NAND_CAFE is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=32768 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +# CONFIG_BLK_DEV_SD is not set +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set + +# +# SCSI Transports +# +CONFIG_SCSI_SPI_ATTRS=y +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +CONFIG_MD=y +CONFIG_BLK_DEV_MD=y +CONFIG_MD_LINEAR=y +CONFIG_MD_RAID0=y +CONFIG_MD_RAID1=y +# CONFIG_MD_RAID10 is not set +# CONFIG_MD_RAID456 is not set +# CONFIG_MD_MULTIPATH is not set +# CONFIG_MD_FAULTY is not set +# CONFIG_BLK_DEV_DM is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# +# CONFIG_MAC_EMUMOUSEBTN is not set +# CONFIG_WINDFARM is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +CONFIG_CICADA_PHY=y +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +CONFIG_E100=y +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +CONFIG_GIANFAR=y +CONFIG_GFAR_NAPI=y +# CONFIG_QLA3XXX is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_83xx_WDT=y + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +CONFIG_I2C_MPC=y +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_M41T00 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BITBANG=y +CONFIG_SPI_MPC83xx=y + +# +# SPI Protocol Masters +# + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB is not set +# CONFIG_FB_IBM_GXT4500 is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# HID Devices +# +CONFIG_HID=y + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_SPLIT_ISO is not set +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_UHCI_HCD=y +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_TOUCHSCREEN is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +CONFIG_USB_GADGET_NET2280=y +CONFIG_USB_NET2280=y +# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=y +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +CONFIG_RTC_INTF_DEV_UIE_EMUL=y + +# +# RTC drivers +# +# CONFIG_RTC_DRV_X1205 is not set +CONFIG_RTC_DRV_DS1307=y +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_TEST is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# DMA Engine support +# +CONFIG_DMA_ENGINE=y + +# +# DMA Clients +# +CONFIG_NET_DMA=y + +# +# DMA Devices +# +CONFIG_INTEL_IOATDMA=y + +# +# Virtualization +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_IOMAP_COPY=y + +# +# Instrumentation Support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RWSEMS is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUGGER is not set +# CONFIG_BDI_SWITCH is not set +# CONFIG_BOOTX_TEXT is not set +# CONFIG_SERIAL_TEXT_DEBUG is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_ECB is not set +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# -- cgit v1.2.3 From ea5b7a61b606854bd17272cb0a751b6d0a8bfa6b Mon Sep 17 00:00:00 2001 From: Li Yang Date: Wed, 7 Feb 2007 13:51:09 +0800 Subject: [POWERPC] 83xx: Added new dr_mode property for usb controller on 83xx Added a new dr_mode property to describe what mode the DR controller is being used in (host, device, OTG). Updated the MPC8349E MDS dts with this new property. Signed-off-by: Li Yang Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8349emds.dts | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/boot/dts/mpc8349emds.dts b/arch/powerpc/boot/dts/mpc8349emds.dts index efceb3432653..dc121b3cb4a9 100644 --- a/arch/powerpc/boot/dts/mpc8349emds.dts +++ b/arch/powerpc/boot/dts/mpc8349emds.dts @@ -39,6 +39,11 @@ reg = <00000000 10000000>; // 256MB at 0 }; + bcsr@e2400000 { + device_type = "board-control"; + reg = ; + }; + soc8349@e0000000 { #address-cells = <1>; #size-cells = <1>; @@ -103,6 +108,7 @@ #size-cells = <0>; interrupt-parent = <700>; interrupts = <26 2>; + dr_mode = "otg"; phy_type = "ulpi"; }; -- cgit v1.2.3 From c161698287f501e7ea229672383af7aefe8a2056 Mon Sep 17 00:00:00 2001 From: Li Yang Date: Wed, 7 Feb 2007 13:47:56 +0800 Subject: [POWERPC] 83xx: Add USB setup code for MPC8349E MDS-PB Add board specific initialization code for USB to work in both MPH and DR mode for MPC8349E MDS-PB board. Signed-off-by: Li Yang Signed-off-by: Kumar Gala --- arch/powerpc/platforms/83xx/mpc834x_sys.c | 73 +++++++++++++++++++++++++++++++ arch/powerpc/platforms/83xx/mpc83xx.h | 18 ++++++++ 2 files changed, 91 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/platforms/83xx/mpc834x_sys.c b/arch/powerpc/platforms/83xx/mpc834x_sys.c index f30393f0b832..873ec543c361 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_sys.c +++ b/arch/powerpc/platforms/83xx/mpc834x_sys.c @@ -43,6 +43,76 @@ unsigned long isa_io_base = 0; unsigned long isa_mem_base = 0; #endif +#define BCSR5_INT_USB 0x02 +/* Note: This is only for PB, not for PB+PIB + * On PB only port0 is connected using ULPI */ +static int mpc834x_usb_cfg(void) +{ + unsigned long sccr, sicrl; + void __iomem *immap; + void __iomem *bcsr_regs = NULL; + u8 bcsr5; + struct device_node *np = NULL; + int port0_is_dr = 0; + + if ((np = of_find_compatible_node(np, "usb", "fsl-usb2-dr")) != NULL) + port0_is_dr = 1; + if ((np = of_find_compatible_node(np, "usb", "fsl-usb2-mph")) != NULL){ + if (port0_is_dr) { + printk(KERN_WARNING + "There is only one USB port on PB board! \n"); + return -1; + } else if (!port0_is_dr) + /* No usb port enabled */ + return -1; + } + + immap = ioremap(get_immrbase(), 0x1000); + if (!immap) + return -1; + + /* Configure clock */ + sccr = in_be32(immap + MPC83XX_SCCR_OFFS); + if (port0_is_dr) + sccr |= MPC83XX_SCCR_USB_DRCM_11; /* 1:3 */ + else + sccr |= MPC83XX_SCCR_USB_MPHCM_11; /* 1:3 */ + out_be32(immap + MPC83XX_SCCR_OFFS, sccr); + + /* Configure Pin */ + sicrl = in_be32(immap + MPC83XX_SICRL_OFFS); + /* set port0 only */ + if (port0_is_dr) + sicrl |= MPC83XX_SICRL_USB0; + else + sicrl &= ~(MPC83XX_SICRL_USB0); + out_be32(immap + MPC83XX_SICRL_OFFS, sicrl); + + iounmap(immap); + + /* Map BCSR area */ + np = of_find_node_by_name(NULL, "bcsr"); + if (np != 0) { + struct resource res; + + of_address_to_resource(np, 0, &res); + bcsr_regs = ioremap(res.start, res.end - res.start + 1); + of_node_put(np); + } + if (!bcsr_regs) + return -1; + + /* + * if SYS board is plug into PIB board, + * force to use the PHY on SYS board + */ + bcsr5 = in_8(bcsr_regs + 5); + if (!(bcsr5 & BCSR5_INT_USB)) + out_8(bcsr_regs + 5, (bcsr5 | BCSR5_INT_USB)); + iounmap(bcsr_regs); + return 0; +} + /* ************************************************************************ * * Setup the architecture @@ -65,6 +135,7 @@ static void __init mpc834x_sys_setup_arch(void) loops_per_jiffy = 50000000 / HZ; of_node_put(np); } + #ifdef CONFIG_PCI for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) add_bridge(np); @@ -72,6 +143,8 @@ static void __init mpc834x_sys_setup_arch(void) ppc_md.pci_exclude_device = mpc83xx_exclude_device; #endif + mpc834x_usb_cfg(); + #ifdef CONFIG_ROOT_NFS ROOT_DEV = Root_NFS; #else diff --git a/arch/powerpc/platforms/83xx/mpc83xx.h b/arch/powerpc/platforms/83xx/mpc83xx.h index 01cae106912b..9cd03b59c8f4 100644 --- a/arch/powerpc/platforms/83xx/mpc83xx.h +++ b/arch/powerpc/platforms/83xx/mpc83xx.h @@ -4,6 +4,24 @@ #include #include +/* System Clock Control Register */ +#define MPC83XX_SCCR_OFFS 0xA08 +#define MPC83XX_SCCR_USB_MPHCM_11 0x00c00000 +#define MPC83XX_SCCR_USB_MPHCM_01 0x00400000 +#define MPC83XX_SCCR_USB_MPHCM_10 0x00800000 +#define MPC83XX_SCCR_USB_DRCM_11 0x00300000 +#define MPC83XX_SCCR_USB_DRCM_01 0x00100000 +#define MPC83XX_SCCR_USB_DRCM_10 0x00200000 + +/* system i/o configuration register low */ +#define MPC83XX_SICRL_OFFS 0x114 +#define MPC83XX_SICRL_USB0 0x40000000 +#define MPC83XX_SICRL_USB1 0x20000000 + +/* system i/o configuration register high */ +#define MPC83XX_SICRH_OFFS 0x118 +#define MPC83XX_SICRH_USB_UTMI 0x00020000 + /* * Declaration for the various functions exported by the * mpc83xx_* files. Mostly for use by mpc83xx_setup -- cgit v1.2.3 From 97c5a20ae68774b4c9246c4657be0d88317f103f Mon Sep 17 00:00:00 2001 From: Li Yang Date: Wed, 7 Feb 2007 13:49:24 +0800 Subject: [POWERPC] 83xx: Add platform_device for USB DR peripheral driver Add platform_device setup code for OTG/peripheral mode of 834x DR module. It is needed for USB client driver to work. Signed-off-by: Li Yang Signed-off-by: Kumar Gala --- arch/powerpc/sysdev/fsl_soc.c | 78 ++++++++++++++++++++++++++++++++----------- 1 file changed, 59 insertions(+), 19 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index 9f2a9a444bfb..34161bc5a02f 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -441,7 +441,8 @@ static int __init fsl_usb_of_init(void) { struct device_node *np; unsigned int i; - struct platform_device *usb_dev_mph = NULL, *usb_dev_dr = NULL; + struct platform_device *usb_dev_mph = NULL, *usb_dev_dr_host = NULL, + *usb_dev_dr_client = NULL; int ret; for (np = NULL, i = 0; @@ -507,33 +508,72 @@ static int __init fsl_usb_of_init(void) of_irq_to_resource(np, 0, &r[1]); - usb_dev_dr = - platform_device_register_simple("fsl-ehci", i, r, 2); - if (IS_ERR(usb_dev_dr)) { - ret = PTR_ERR(usb_dev_dr); + prop = get_property(np, "dr_mode", NULL); + + if (!prop || !strcmp(prop, "host")) { + usb_data.operating_mode = FSL_USB2_DR_HOST; + usb_dev_dr_host = platform_device_register_simple( + "fsl-ehci", i, r, 2); + if (IS_ERR(usb_dev_dr_host)) { + ret = PTR_ERR(usb_dev_dr_host); + goto err; + } + } else if (prop && !strcmp(prop, "peripheral")) { + usb_data.operating_mode = FSL_USB2_DR_DEVICE; + usb_dev_dr_client = platform_device_register_simple( + "fsl-usb2-udc", i, r, 2); + if (IS_ERR(usb_dev_dr_client)) { + ret = PTR_ERR(usb_dev_dr_client); + goto err; + } + } else if (prop && !strcmp(prop, "otg")) { + usb_data.operating_mode = FSL_USB2_DR_OTG; + usb_dev_dr_host = platform_device_register_simple( + "fsl-ehci", i, r, 2); + if (IS_ERR(usb_dev_dr_host)) { + ret = PTR_ERR(usb_dev_dr_host); + goto err; + } + usb_dev_dr_client = platform_device_register_simple( + "fsl-usb2-udc", i, r, 2); + if (IS_ERR(usb_dev_dr_client)) { + ret = PTR_ERR(usb_dev_dr_client); + goto err; + } + } else { + ret = -EINVAL; goto err; } - usb_dev_dr->dev.coherent_dma_mask = 0xffffffffUL; - usb_dev_dr->dev.dma_mask = &usb_dev_dr->dev.coherent_dma_mask; - - usb_data.operating_mode = FSL_USB2_DR_HOST; - prop = get_property(np, "phy_type", NULL); usb_data.phy_mode = determine_usb_phy(prop); - ret = - platform_device_add_data(usb_dev_dr, &usb_data, - sizeof(struct - fsl_usb2_platform_data)); - if (ret) - goto unreg_dr; + if (usb_dev_dr_host) { + usb_dev_dr_host->dev.coherent_dma_mask = 0xffffffffUL; + usb_dev_dr_host->dev.dma_mask = &usb_dev_dr_host-> + dev.coherent_dma_mask; + if ((ret = platform_device_add_data(usb_dev_dr_host, + &usb_data, sizeof(struct + fsl_usb2_platform_data)))) + goto unreg_dr; + } + if (usb_dev_dr_client) { + usb_dev_dr_client->dev.coherent_dma_mask = 0xffffffffUL; + usb_dev_dr_client->dev.dma_mask = &usb_dev_dr_client-> + dev.coherent_dma_mask; + if ((ret = platform_device_add_data(usb_dev_dr_client, + &usb_data, sizeof(struct + fsl_usb2_platform_data)))) + goto unreg_dr; + } } return 0; unreg_dr: - if (usb_dev_dr) - platform_device_unregister(usb_dev_dr); + if (usb_dev_dr_host) + platform_device_unregister(usb_dev_dr_host); + if (usb_dev_dr_client) + platform_device_unregister(usb_dev_dr_client); unreg_mph: if (usb_dev_mph) platform_device_unregister(usb_dev_mph); @@ -699,7 +739,7 @@ static int __init fs_enet_of_init(void) if (ret) goto unreg; } - + of_node_put(phy); of_node_put(mdio); -- cgit v1.2.3 From 33a67fe898dbbe25589d2fca805cb68cfd7d311f Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Thu, 8 Feb 2007 13:36:44 -0800 Subject: [S390]: Rewrite of the IUCV base code, part 1 Remove the old IUCV code from drivers/s390/net Remove approprirate IUCV entries from drivers/s390/net/Makefile, drivers/s390/net/Kconfig and arch/s390/defconfig Signed-off-by: Frank Pavlic Signed-off-by: Martin Schwidefsky Signed-off-by: David S. Miller --- arch/s390/defconfig | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/s390/defconfig b/arch/s390/defconfig index 7c621b8ef683..7729ca114cc9 100644 --- a/arch/s390/defconfig +++ b/arch/s390/defconfig @@ -508,7 +508,6 @@ CONFIG_NET_ETHERNET=y # CONFIG_LCS=m CONFIG_CTC=m -CONFIG_IUCV=m # CONFIG_NETIUCV is not set # CONFIG_SMSGIUCV is not set # CONFIG_CLAW is not set -- cgit v1.2.3 From 2356f4cb191100a5e92d537f13e5efdbc697e9cb Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Thu, 8 Feb 2007 13:37:42 -0800 Subject: [S390]: Rewrite of the IUCV base code, part 2 Add rewritten IUCV base code to net/iucv. Signed-off-by: Frank Pavlic Signed-off-by: Martin Schwidefsky Signed-off-by: David S. Miller --- arch/s390/defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/s390/defconfig b/arch/s390/defconfig index 7729ca114cc9..46f2d4578e6b 100644 --- a/arch/s390/defconfig +++ b/arch/s390/defconfig @@ -179,6 +179,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set CONFIG_NET_KEY=y +CONFIG_IUCV=m CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set -- cgit v1.2.3 From eac3731bd04c7131478722a3c148b78774553116 Mon Sep 17 00:00:00 2001 From: Jennifer Hunt Date: Thu, 8 Feb 2007 13:51:54 -0800 Subject: [S390]: Add AF_IUCV socket support From: Jennifer Hunt This patch adds AF_IUCV socket support. Signed-off-by: Frank Pavlic Signed-off-by: Martin Schwidefsky Signed-off-by: David S. Miller --- arch/s390/defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/s390/defconfig b/arch/s390/defconfig index 46f2d4578e6b..1406400bf3ea 100644 --- a/arch/s390/defconfig +++ b/arch/s390/defconfig @@ -180,6 +180,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_SUB_POLICY is not set CONFIG_NET_KEY=y CONFIG_IUCV=m +CONFIG_AFIUCV=m CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set -- cgit v1.2.3 From 8f34f6cfa27ddae8faf10aef986db2fda1ba6791 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Thu, 8 Feb 2007 10:47:31 -0600 Subject: [POWERPC] QE: Rename ucc_slow_info.us_regs to ucc_slow_info.regs Rename the 'us_regs' field of the ucc_slow_info structure in ucc_slow.h to just 'regs'. The equivalent field in the ucc_fast_info structure is also called 'regs', so this patch makes them comparable, and makes the code a little easier to read, because there already is a 'us_regs' in another ucc_slow structure. Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala --- arch/powerpc/sysdev/qe_lib/ucc_slow.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/sysdev/qe_lib/ucc_slow.c b/arch/powerpc/sysdev/qe_lib/ucc_slow.c index 47b56203f47e..0e97e5c94f8a 100644 --- a/arch/powerpc/sysdev/qe_lib/ucc_slow.c +++ b/arch/powerpc/sysdev/qe_lib/ucc_slow.c @@ -179,7 +179,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc uccs->us_info = us_info; uccs->saved_uccm = 0; uccs->p_rx_frame = 0; - uccs->us_regs = us_info->us_regs; + uccs->us_regs = us_info->regs; us_regs = uccs->us_regs; uccs->p_ucce = (u16 *) & (us_regs->ucce); uccs->p_uccm = (u16 *) & (us_regs->uccm); @@ -206,7 +206,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc uccs->us_pram = qe_muram_addr(uccs->us_pram_offset); /* Init Guemr register */ - if ((ret = ucc_init_guemr((struct ucc_common *) (us_info->us_regs)))) { + if ((ret = ucc_init_guemr((struct ucc_common *) (us_info->regs)))) { uccs_err("ucc_slow_init: Could not init the guemr register."); ucc_slow_free(uccs); return ret; @@ -214,7 +214,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc /* Set UCC to slow type */ if ((ret = ucc_set_type(us_info->ucc_num, - (struct ucc_common *) (us_info->us_regs), + (struct ucc_common *) (us_info->regs), UCC_SPEED_TYPE_SLOW))) { uccs_err("ucc_slow_init: Could not init the guemr register."); ucc_slow_free(uccs); -- cgit v1.2.3 From 914ab06279f15d3f368f4fae74db58fdcf03a2ed Mon Sep 17 00:00:00 2001 From: David Brownell Date: Tue, 23 Jan 2007 20:12:15 -0800 Subject: [AVR32] /proc/interrupts display The /proc/interrupts file should also display the irq_chip associated with each irq ... e.g. INTC, EIM, GPIO. Signed-off-by: David Brownell Signed-off-by: Haavard Skinnemoen --- arch/avr32/kernel/irq.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/avr32/kernel/irq.c b/arch/avr32/kernel/irq.c index 856f3548e664..fd311248c143 100644 --- a/arch/avr32/kernel/irq.c +++ b/arch/avr32/kernel/irq.c @@ -57,6 +57,7 @@ int show_interrupts(struct seq_file *p, void *v) seq_printf(p, "%3d: ", i); for_each_online_cpu(cpu) seq_printf(p, "%10u ", kstat_cpu(cpu).irqs[i]); + seq_printf(p, " %8s", irq_desc[i].chip->name ? : "-"); seq_printf(p, " %s", action->name); for (action = action->next; action; action = action->next) seq_printf(p, ", %s", action->name); -- cgit v1.2.3 From a3d912c8fa709c4078ceaabf4d71001190e19325 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Tue, 23 Jan 2007 20:14:02 -0800 Subject: [AVR32] fix serial port setup on ATSTK1000 Fixes to USART setup on the stk-1000 ... don't configure USART 2, since its TXD/RXD are used for INT-A and INT-B buttons; and configure USART 0 (for IRDA, and with corrected IRQ) iff SW2 has a non-default setting. Signed-off-by: David Brownell Signed-off-by: Haavard Skinnemoen --- arch/avr32/boards/atstk1000/atstk1002.c | 16 +++++++++++++--- arch/avr32/mach-at32ap/at32ap7000.c | 4 ++-- 2 files changed, 15 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c index 32b361f31c2c..3787d6bfe0d7 100644 --- a/arch/avr32/boards/atstk1000/atstk1002.c +++ b/arch/avr32/boards/atstk1000/atstk1002.c @@ -20,6 +20,9 @@ #include #include + +#define SW2_DEFAULT /* MMCI and UART_A available */ + struct eth_addr { u8 addr[6]; }; @@ -86,9 +89,13 @@ static void __init set_hw_addr(struct platform_device *pdev) void __init setup_board(void) { - at32_map_usart(1, 0); /* /dev/ttyS0 */ - at32_map_usart(2, 1); /* /dev/ttyS1 */ - at32_map_usart(3, 2); /* /dev/ttyS2 */ +#ifdef SW2_DEFAULT + at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */ +#else + at32_map_usart(0, 1); /* USART 0/B: /dev/ttyS1, IRDA */ +#endif + /* USART 2/unused: expansion connector */ + at32_map_usart(3, 2); /* USART 3/C: /dev/ttyS2, DB9 */ at32_setup_serial_console(0); } @@ -97,8 +104,11 @@ static int __init atstk1002_init(void) { at32_add_system_devices(); +#ifdef SW2_DEFAULT at32_add_device_usart(0); +#else at32_add_device_usart(1); +#endif at32_add_device_usart(2); set_hw_addr(at32_add_device_eth(0, ð_data[0])); diff --git a/arch/avr32/mach-at32ap/at32ap7000.c b/arch/avr32/mach-at32ap/at32ap7000.c index 48f4ef38c70e..175853a3c32b 100644 --- a/arch/avr32/mach-at32ap/at32ap7000.c +++ b/arch/avr32/mach-at32ap/at32ap7000.c @@ -521,7 +521,7 @@ static struct atmel_uart_data atmel_usart0_data = { }; static struct resource atmel_usart0_resource[] = { PBMEM(0xffe00c00), - IRQ(7), + IRQ(6), }; DEFINE_DEV_DATA(atmel_usart, 0); DEV_CLK(usart, atmel_usart0, pba, 4); @@ -583,7 +583,7 @@ static inline void configure_usart3_pins(void) select_peripheral(PB(17), PERIPH_B, 0); /* TXD */ } -static struct platform_device *at32_usarts[4]; +static struct platform_device *__initdata at32_usarts[4]; void __init at32_map_usart(unsigned int hw_id, unsigned int line) { -- cgit v1.2.3 From 58febc0b1374de7506277d3aa9e9cddaea62ba65 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Tue, 23 Jan 2007 20:21:36 -0800 Subject: [AVR32] ext int fixes Bugfixes for external irq handler set_irq_type(): - If set_irq_type() can't set the type, don't change anything! - It's not OK to change the flow handler as part of set_irq_type(), among other issues that violates spinlock rules. Instead, we can call the relevant handler when we demux the external interrupts. - The external irq demux has no need to grab the spinlock. And in fact grabbing it that way was wrong, since that code might be pre-empted by an irq at a different priority level, and that code might then have tried to grab that spinlock... Signed-off-by: David Brownell Signed-off-by: Haavard Skinnemoen --- arch/avr32/mach-at32ap/extint.c | 36 +++++++++++++++++------------------- 1 file changed, 17 insertions(+), 19 deletions(-) (limited to 'arch') diff --git a/arch/avr32/mach-at32ap/extint.c b/arch/avr32/mach-at32ap/extint.c index b59272e81b9a..4a60eccfebd2 100644 --- a/arch/avr32/mach-at32ap/extint.c +++ b/arch/avr32/mach-at32ap/extint.c @@ -55,20 +55,11 @@ static int eim_set_irq_type(unsigned int irq, unsigned int flow_type) unsigned long flags; int ret = 0; + flow_type &= IRQ_TYPE_SENSE_MASK; if (flow_type == IRQ_TYPE_NONE) flow_type = IRQ_TYPE_LEVEL_LOW; desc = &irq_desc[irq]; - desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL); - desc->status |= flow_type & IRQ_TYPE_SENSE_MASK; - - if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) { - desc->status |= IRQ_LEVEL; - set_irq_handler(irq, handle_level_irq); - } else { - set_irq_handler(irq, handle_edge_irq); - } - spin_lock_irqsave(&sm->lock, flags); mode = sm_readl(sm, EIM_MODE); @@ -97,9 +88,16 @@ static int eim_set_irq_type(unsigned int irq, unsigned int flow_type) break; } - sm_writel(sm, EIM_MODE, mode); - sm_writel(sm, EIM_EDGE, edge); - sm_writel(sm, EIM_LEVEL, level); + if (ret == 0) { + sm_writel(sm, EIM_MODE, mode); + sm_writel(sm, EIM_EDGE, edge); + sm_writel(sm, EIM_LEVEL, level); + + if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) + flow_type |= IRQ_LEVEL; + desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL); + desc->status |= flow_type; + } spin_unlock_irqrestore(&sm->lock, flags); @@ -122,8 +120,6 @@ static void demux_eim_irq(unsigned int irq, struct irq_desc *desc) unsigned long status, pending; unsigned int i, ext_irq; - spin_lock(&sm->lock); - status = sm_readl(sm, EIM_ISR); pending = status & sm_readl(sm, EIM_IMR); @@ -133,10 +129,11 @@ static void demux_eim_irq(unsigned int irq, struct irq_desc *desc) ext_irq = i + sm->eim_first_irq; ext_desc = irq_desc + ext_irq; - ext_desc->handle_irq(ext_irq, ext_desc); + if (ext_desc->status & IRQ_LEVEL) + handle_level_irq(ext_irq, ext_desc); + else + handle_edge_irq(ext_irq, ext_desc); } - - spin_unlock(&sm->lock); } static int __init eim_init(void) @@ -168,8 +165,9 @@ static int __init eim_init(void) sm->eim_chip = &eim_chip; for (i = 0; i < nr_irqs; i++) { + /* NOTE the handler we set here is ignored by the demux */ set_irq_chip_and_handler(sm->eim_first_irq + i, &eim_chip, - handle_edge_irq); + handle_level_irq); set_irq_chip_data(sm->eim_first_irq + i, sm); } -- cgit v1.2.3 From 212868d387d0033b7e0029326a900126fe5e3d52 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Sun, 28 Jan 2007 12:56:42 -0800 Subject: [AVR32] Fix incorrect invalidation of shared cachelines Fix bug in dma_map_single(..., DMA_FROM_DEVICE) caused by incorrect invalidation of shared cachelines at the beginning and/or end of the specified buffer. Those shared cachelines need to be flushed, since they may hold valid data (which must not be discarded). Signed-off-by: David Brownell Signed-off-by: Haavard Skinnemoen --- arch/avr32/mm/cache.c | 32 ++++++++++++++++++++++++-------- 1 file changed, 24 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/avr32/mm/cache.c b/arch/avr32/mm/cache.c index 450515b245a0..fb13f72e9a02 100644 --- a/arch/avr32/mm/cache.c +++ b/arch/avr32/mm/cache.c @@ -22,18 +22,34 @@ void invalidate_dcache_region(void *start, size_t size) { - unsigned long v, begin, end, linesz; + unsigned long v, begin, end, linesz, mask; + int flush = 0; linesz = boot_cpu_data.dcache.linesz; + mask = linesz - 1; + + /* when first and/or last cachelines are shared, flush them + * instead of invalidating ... never discard valid data! + */ + begin = (unsigned long)start; + end = begin + size - 1; + + if (begin & mask) { + flush_dcache_line(start); + begin += linesz; + flush = 1; + } + if ((end & mask) != mask) { + flush_dcache_line((void *)end); + end -= linesz; + flush = 1; + } - //printk("invalidate dcache: %p + %u\n", start, size); - - /* You asked for it, you got it */ - begin = (unsigned long)start & ~(linesz - 1); - end = ((unsigned long)start + size + linesz - 1) & ~(linesz - 1); - - for (v = begin; v < end; v += linesz) + /* remaining cachelines only need invalidation */ + for (v = begin; v <= end; v += linesz) invalidate_dcache_line((void *)v); + if (flush) + flush_write_buffer(); } void clean_dcache_region(void *start, size_t size) -- cgit v1.2.3 From 10b50b7dd2716b944299d45452d0875dbeb5f0c2 Mon Sep 17 00:00:00 2001 From: "Ahmed S. Darwish" Date: Mon, 5 Feb 2007 04:41:27 +0200 Subject: [AVR32] Use ARRAY_SIZE macro when appropriate A patch to use ARRAY_SIZE macro already defined in linux/kernel.h Signed-off-by: Ahmed S. Darwish Signed-off-by: Haavard Skinnemoen --- arch/avr32/kernel/setup.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/avr32/kernel/setup.c b/arch/avr32/kernel/setup.c index a34211601008..c6734aefb559 100644 --- a/arch/avr32/kernel/setup.c +++ b/arch/avr32/kernel/setup.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include @@ -174,8 +175,7 @@ static int __init parse_tag_mem_range(struct tag *tag, * Copy the data so the bootmem init code doesn't need to care * about it. */ - if (mem_range_next_free >= - (sizeof(mem_range_cache) / sizeof(mem_range_cache[0]))) + if (mem_range_next_free >= ARRAY_SIZE(mem_range_cache)) panic("Physical memory map too complex!\n"); new = &mem_range_cache[mem_range_next_free++]; -- cgit v1.2.3 From 6a4e5227a33f60f918b30cf2001fb0bb259d9396 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Mon, 5 Feb 2007 16:57:13 +0100 Subject: [AVR32] GPIO API implementation Arch-neutral GPIO calls for AVR32. GPIO IRQ support written by David Brownell. Signed-off-by: Haavard Skinnemoen --- arch/avr32/mach-at32ap/Makefile | 2 +- arch/avr32/mach-at32ap/at32ap7000.c | 2 +- arch/avr32/mach-at32ap/pio.c | 233 +++++++++++++++++++++++++++++++++--- 3 files changed, 221 insertions(+), 16 deletions(-) (limited to 'arch') diff --git a/arch/avr32/mach-at32ap/Makefile b/arch/avr32/mach-at32ap/Makefile index f62eb6915510..b21bea9af8b1 100644 --- a/arch/avr32/mach-at32ap/Makefile +++ b/arch/avr32/mach-at32ap/Makefile @@ -1,2 +1,2 @@ -obj-y += at32ap.o clock.o pio.o intc.o extint.o hsmc.o +obj-y += at32ap.o clock.o intc.o extint.o pio.o hsmc.o obj-$(CONFIG_CPU_AT32AP7000) += at32ap7000.o diff --git a/arch/avr32/mach-at32ap/at32ap7000.c b/arch/avr32/mach-at32ap/at32ap7000.c index 175853a3c32b..21561ab60471 100644 --- a/arch/avr32/mach-at32ap/at32ap7000.c +++ b/arch/avr32/mach-at32ap/at32ap7000.c @@ -498,7 +498,7 @@ DEV_CLK(mck, pio3, pba, 13); void __init at32_add_system_devices(void) { - system_manager.eim_first_irq = NR_INTERNAL_IRQS; + system_manager.eim_first_irq = EIM_IRQ_BASE; platform_device_register(&at32_sm_device); platform_device_register(&at32_intc0_device); diff --git a/arch/avr32/mach-at32ap/pio.c b/arch/avr32/mach-at32ap/pio.c index f1280ed8ed6d..17e835de95cb 100644 --- a/arch/avr32/mach-at32ap/pio.c +++ b/arch/avr32/mach-at32ap/pio.c @@ -12,7 +12,9 @@ #include #include #include +#include +#include #include #include @@ -26,7 +28,8 @@ struct pio_device { const struct platform_device *pdev; struct clk *clk; u32 pinmux_mask; - char name[32]; + u32 gpio_mask; + char name[8]; }; static struct pio_device pio_dev[MAX_NR_PIO_DEVICES]; @@ -76,6 +79,9 @@ void __init at32_select_periph(unsigned int pin, unsigned int periph, if (!(flags & AT32_GPIOF_PULLUP)) pio_writel(pio, PUDR, mask); + /* gpio_request NOT allowed */ + set_bit(pin_index, &pio->gpio_mask); + return; fail: @@ -99,19 +105,29 @@ void __init at32_select_gpio(unsigned int pin, unsigned long flags) goto fail; } - pio_writel(pio, PUER, mask); - if (flags & AT32_GPIOF_HIGH) - pio_writel(pio, SODR, mask); - else - pio_writel(pio, CODR, mask); - if (flags & AT32_GPIOF_OUTPUT) + if (flags & AT32_GPIOF_OUTPUT) { + if (flags & AT32_GPIOF_HIGH) + pio_writel(pio, SODR, mask); + else + pio_writel(pio, CODR, mask); + pio_writel(pio, PUDR, mask); pio_writel(pio, OER, mask); - else + } else { + if (flags & AT32_GPIOF_PULLUP) + pio_writel(pio, PUER, mask); + else + pio_writel(pio, PUDR, mask); + if (flags & AT32_GPIOF_DEGLITCH) + pio_writel(pio, IFER, mask); + else + pio_writel(pio, IFDR, mask); pio_writel(pio, ODR, mask); + } pio_writel(pio, PER, mask); - if (!(flags & AT32_GPIOF_PULLUP)) - pio_writel(pio, PUDR, mask); + + /* gpio_request now allowed */ + clear_bit(pin_index, &pio->gpio_mask); return; @@ -119,20 +135,199 @@ fail: dump_stack(); } +/*--------------------------------------------------------------------------*/ + +/*--------------------------------------------------------------------------*/ + +/* GPIO API */ + +int gpio_request(unsigned int gpio, const char *label) +{ + struct pio_device *pio; + unsigned int pin; + + pio = gpio_to_pio(gpio); + if (!pio) + return -ENODEV; + + pin = gpio & 0x1f; + if (test_and_set_bit(pin, &pio->gpio_mask)) + return -EBUSY; + + return 0; +} +EXPORT_SYMBOL(gpio_request); + +void gpio_free(unsigned int gpio) +{ + struct pio_device *pio; + unsigned int pin; + + pio = gpio_to_pio(gpio); + if (!pio) { + printk(KERN_ERR + "gpio: attempted to free invalid pin %u\n", gpio); + return; + } + + pin = gpio & 0x1f; + if (!test_and_clear_bit(pin, &pio->gpio_mask)) + printk(KERN_ERR "gpio: freeing free or non-gpio pin %s-%u\n", + pio->name, pin); +} +EXPORT_SYMBOL(gpio_free); + +int gpio_direction_input(unsigned int gpio) +{ + struct pio_device *pio; + unsigned int pin; + + pio = gpio_to_pio(gpio); + if (!pio) + return -ENODEV; + + pin = gpio & 0x1f; + pio_writel(pio, ODR, 1 << pin); + + return 0; +} +EXPORT_SYMBOL(gpio_direction_input); + +int gpio_direction_output(unsigned int gpio) +{ + struct pio_device *pio; + unsigned int pin; + + pio = gpio_to_pio(gpio); + if (!pio) + return -ENODEV; + + pin = gpio & 0x1f; + pio_writel(pio, OER, 1 << pin); + + return 0; +} +EXPORT_SYMBOL(gpio_direction_output); + +int gpio_get_value(unsigned int gpio) +{ + struct pio_device *pio = &pio_dev[gpio >> 5]; + + return (pio_readl(pio, PDSR) >> (gpio & 0x1f)) & 1; +} +EXPORT_SYMBOL(gpio_get_value); + +void gpio_set_value(unsigned int gpio, int value) +{ + struct pio_device *pio = &pio_dev[gpio >> 5]; + u32 mask; + + mask = 1 << (gpio & 0x1f); + if (value) + pio_writel(pio, SODR, mask); + else + pio_writel(pio, CODR, mask); +} +EXPORT_SYMBOL(gpio_set_value); + +/*--------------------------------------------------------------------------*/ + +/* GPIO IRQ support */ + +static void gpio_irq_mask(unsigned irq) +{ + unsigned gpio = irq_to_gpio(irq); + struct pio_device *pio = &pio_dev[gpio >> 5]; + + pio_writel(pio, IDR, 1 << (gpio & 0x1f)); +} + +static void gpio_irq_unmask(unsigned irq) +{ + unsigned gpio = irq_to_gpio(irq); + struct pio_device *pio = &pio_dev[gpio >> 5]; + + pio_writel(pio, IER, 1 << (gpio & 0x1f)); +} + +static int gpio_irq_type(unsigned irq, unsigned type) +{ + if (type != IRQ_TYPE_EDGE_BOTH && type != IRQ_TYPE_NONE) + return -EINVAL; + + return 0; +} + +static struct irq_chip gpio_irqchip = { + .name = "gpio", + .mask = gpio_irq_mask, + .unmask = gpio_irq_unmask, + .set_type = gpio_irq_type, +}; + +static void gpio_irq_handler(unsigned irq, struct irq_desc *desc) +{ + struct pio_device *pio = get_irq_chip_data(irq); + unsigned gpio_irq; + + gpio_irq = (unsigned) get_irq_data(irq); + for (;;) { + u32 isr; + struct irq_desc *d; + + /* ack pending GPIO interrupts */ + isr = pio_readl(pio, ISR) & pio_readl(pio, IMR); + if (!isr) + break; + do { + int i; + + i = ffs(isr) - 1; + isr &= ~(1 << i); + + i += gpio_irq; + d = &irq_desc[i]; + + d->handle_irq(i, d); + } while (isr); + } +} + +static void __init +gpio_irq_setup(struct pio_device *pio, int irq, int gpio_irq) +{ + unsigned i; + + set_irq_chip_data(irq, pio); + set_irq_data(irq, (void *) gpio_irq); + + for (i = 0; i < 32; i++, gpio_irq++) { + set_irq_chip_data(gpio_irq, pio); + set_irq_chip_and_handler(gpio_irq, &gpio_irqchip, + handle_simple_irq); + } + + set_irq_chained_handler(irq, gpio_irq_handler); +} + +/*--------------------------------------------------------------------------*/ + static int __init pio_probe(struct platform_device *pdev) { struct pio_device *pio = NULL; + int irq = platform_get_irq(pdev, 0); + int gpio_irq_base = GPIO_IRQ_BASE + pdev->id * 32; BUG_ON(pdev->id >= MAX_NR_PIO_DEVICES); pio = &pio_dev[pdev->id]; BUG_ON(!pio->regs); - /* TODO: Interrupts */ + gpio_irq_setup(pio, irq, gpio_irq_base); platform_set_drvdata(pdev, pio); - printk(KERN_INFO "%s: Atmel Port Multiplexer at 0x%p (irq %d)\n", - pio->name, pio->regs, platform_get_irq(pdev, 0)); + printk(KERN_DEBUG "%s: base 0x%p, irq %d chains %d..%d\n", + pio->name, pio->regs, irq, gpio_irq_base, gpio_irq_base + 31); return 0; } @@ -148,7 +343,7 @@ static int __init pio_init(void) { return platform_driver_register(&pio_driver); } -subsys_initcall(pio_init); +postcore_initcall(pio_init); void __init at32_init_pio(struct platform_device *pdev) { @@ -184,6 +379,16 @@ void __init at32_init_pio(struct platform_device *pdev) pio->pdev = pdev; pio->regs = ioremap(regs->start, regs->end - regs->start + 1); + /* + * request_gpio() is only valid for pins that have been + * explicitly configured as GPIO and not previously requested + */ + pio->gpio_mask = ~0UL; + pio_writel(pio, ODR, ~0UL); pio_writel(pio, PER, ~0UL); + + /* start with irqs disabled and acked */ + pio_writel(pio, IDR, ~0UL); + (void) pio_readl(pio, ISR); } -- cgit v1.2.3 From dde251033f3e54619317269a908ce40e6f3a8d04 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Mon, 29 Jan 2007 17:59:40 +0100 Subject: [AVR32] Don't reset PIO state at bootup Leave the PIO lines as the bootloader left them. This allows us to use PIOE without disturbing the SDRAM muxing. Signed-off-by: Haavard Skinnemoen --- arch/avr32/mach-at32ap/pio.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'arch') diff --git a/arch/avr32/mach-at32ap/pio.c b/arch/avr32/mach-at32ap/pio.c index 17e835de95cb..c3f596ce5267 100644 --- a/arch/avr32/mach-at32ap/pio.c +++ b/arch/avr32/mach-at32ap/pio.c @@ -385,9 +385,6 @@ void __init at32_init_pio(struct platform_device *pdev) */ pio->gpio_mask = ~0UL; - pio_writel(pio, ODR, ~0UL); - pio_writel(pio, PER, ~0UL); - /* start with irqs disabled and acked */ pio_writel(pio, IDR, ~0UL); (void) pio_readl(pio, ISR); -- cgit v1.2.3 From e7f70b8cc69b1bcc56ed8d70f8e3671ec3956374 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Tue, 30 Jan 2007 11:01:23 +0100 Subject: [AVR32] Introduce at32_reserve_pin() at32_reserve_pin() can be used for reserving portmux pins without altering their configuration. Useful for e.g. SDRAM pins where we really don't want to change the bootloader-provided configuration. Signed-off-by: Haavard Skinnemoen --- arch/avr32/mach-at32ap/pio.c | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/avr32/mach-at32ap/pio.c b/arch/avr32/mach-at32ap/pio.c index c3f596ce5267..9ba5654cde11 100644 --- a/arch/avr32/mach-at32ap/pio.c +++ b/arch/avr32/mach-at32ap/pio.c @@ -135,7 +135,28 @@ fail: dump_stack(); } -/*--------------------------------------------------------------------------*/ +/* Reserve a pin, preventing anyone else from changing its configuration. */ +void __init at32_reserve_pin(unsigned int pin) +{ + struct pio_device *pio; + unsigned int pin_index = pin & 0x1f; + + pio = gpio_to_pio(pin); + if (unlikely(!pio)) { + printk("pio: invalid pin %u\n", pin); + goto fail; + } + + if (unlikely(test_and_set_bit(pin_index, &pio->pinmux_mask))) { + printk("%s: pin %u is busy\n", pio->name, pin_index); + goto fail; + } + + return; + +fail: + dump_stack(); +} /*--------------------------------------------------------------------------*/ -- cgit v1.2.3 From 7f9f4678637f9ee1a999cc0870c4668f32e1a7eb Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Tue, 30 Jan 2007 11:16:16 +0100 Subject: [AVR32] Add PIOE device and reserve SDRAM pins The PIOE device was left out before because it muxes SDRAM pins (and is therefore a bit dangerous to mess with) and because no existing drivers had any use for it. It is needed for CompactFlash, however, and now that we have a way to protect the SDRAM pins, it can be safely added. Signed-off-by: Haavard Skinnemoen --- arch/avr32/boards/atstk1000/atstk1002.c | 23 +++++++++++++++++++++++ arch/avr32/mach-at32ap/at32ap7000.c | 10 ++++++++++ 2 files changed, 33 insertions(+) (limited to 'arch') diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c index 3787d6bfe0d7..bca815ff11f2 100644 --- a/arch/avr32/boards/atstk1000/atstk1002.c +++ b/arch/avr32/boards/atstk1000/atstk1002.c @@ -19,6 +19,7 @@ #include #include #include +#include #define SW2_DEFAULT /* MMCI and UART_A available */ @@ -102,6 +103,28 @@ void __init setup_board(void) static int __init atstk1002_init(void) { + /* + * ATSTK1000 uses 32-bit SDRAM interface. Reserve the + * SDRAM-specific pins so that nobody messes with them. + */ + at32_reserve_pin(GPIO_PIN_PE(0)); /* DATA[16] */ + at32_reserve_pin(GPIO_PIN_PE(1)); /* DATA[17] */ + at32_reserve_pin(GPIO_PIN_PE(2)); /* DATA[18] */ + at32_reserve_pin(GPIO_PIN_PE(3)); /* DATA[19] */ + at32_reserve_pin(GPIO_PIN_PE(4)); /* DATA[20] */ + at32_reserve_pin(GPIO_PIN_PE(5)); /* DATA[21] */ + at32_reserve_pin(GPIO_PIN_PE(6)); /* DATA[22] */ + at32_reserve_pin(GPIO_PIN_PE(7)); /* DATA[23] */ + at32_reserve_pin(GPIO_PIN_PE(8)); /* DATA[24] */ + at32_reserve_pin(GPIO_PIN_PE(9)); /* DATA[25] */ + at32_reserve_pin(GPIO_PIN_PE(10)); /* DATA[26] */ + at32_reserve_pin(GPIO_PIN_PE(11)); /* DATA[27] */ + at32_reserve_pin(GPIO_PIN_PE(12)); /* DATA[28] */ + at32_reserve_pin(GPIO_PIN_PE(13)); /* DATA[29] */ + at32_reserve_pin(GPIO_PIN_PE(14)); /* DATA[30] */ + at32_reserve_pin(GPIO_PIN_PE(15)); /* DATA[31] */ + at32_reserve_pin(GPIO_PIN_PE(26)); /* SDCS */ + at32_add_system_devices(); #ifdef SW2_DEFAULT diff --git a/arch/avr32/mach-at32ap/at32ap7000.c b/arch/avr32/mach-at32ap/at32ap7000.c index 21561ab60471..981d553e471b 100644 --- a/arch/avr32/mach-at32ap/at32ap7000.c +++ b/arch/avr32/mach-at32ap/at32ap7000.c @@ -496,6 +496,13 @@ static struct resource pio3_resource[] = { DEFINE_DEV(pio, 3); DEV_CLK(mck, pio3, pba, 13); +static struct resource pio4_resource[] = { + PBMEM(0xffe03800), + IRQ(17), +}; +DEFINE_DEV(pio, 4); +DEV_CLK(mck, pio4, pba, 14); + void __init at32_add_system_devices(void) { system_manager.eim_first_irq = EIM_IRQ_BASE; @@ -509,6 +516,7 @@ void __init at32_add_system_devices(void) platform_device_register(&pio1_device); platform_device_register(&pio2_device); platform_device_register(&pio3_device); + platform_device_register(&pio4_device); } /* -------------------------------------------------------------------- @@ -860,6 +868,7 @@ struct clk *at32_clock_list[] = { &pio1_mck, &pio2_mck, &pio3_mck, + &pio4_mck, &atmel_usart0_usart, &atmel_usart1_usart, &atmel_usart2_usart, @@ -880,6 +889,7 @@ void __init at32_portmux_init(void) at32_init_pio(&pio1_device); at32_init_pio(&pio2_device); at32_init_pio(&pio3_device); + at32_init_pio(&pio4_device); } void __init at32_clock_init(void) -- cgit v1.2.3 From 3d60ee1b04320d0695e071828dbadf3564d4568a Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Wed, 10 Jan 2007 20:20:02 +0100 Subject: [AVR32] SPI platform code update Move stuff in spi.c into ATSTK1002 board code and update SPI platform device definitions according to the new GPIO API. Signed-off-by: Haavard Skinnemoen --- arch/avr32/boards/atstk1000/Makefile | 2 +- arch/avr32/boards/atstk1000/atstk1002.c | 14 +++++++++++ arch/avr32/boards/atstk1000/spi.c | 27 -------------------- arch/avr32/mach-at32ap/at32ap7000.c | 44 +++++++++++++++++++++++++++------ 4 files changed, 51 insertions(+), 36 deletions(-) delete mode 100644 arch/avr32/boards/atstk1000/spi.c (limited to 'arch') diff --git a/arch/avr32/boards/atstk1000/Makefile b/arch/avr32/boards/atstk1000/Makefile index df9499480530..8e0992201bb9 100644 --- a/arch/avr32/boards/atstk1000/Makefile +++ b/arch/avr32/boards/atstk1000/Makefile @@ -1,2 +1,2 @@ -obj-y += setup.o spi.o flash.o +obj-y += setup.o flash.o obj-$(CONFIG_BOARD_ATSTK1002) += atstk1002.o diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c index bca815ff11f2..d47e39f0e971 100644 --- a/arch/avr32/boards/atstk1000/atstk1002.c +++ b/arch/avr32/boards/atstk1000/atstk1002.c @@ -8,15 +8,18 @@ * published by the Free Software Foundation. */ #include +#include #include #include #include #include #include #include +#include #include #include +#include #include #include #include @@ -33,6 +36,16 @@ static struct eth_addr __initdata hw_addr[2]; static struct eth_platform_data __initdata eth_data[2]; extern struct lcdc_platform_data atstk1000_fb0_data; +static struct spi_board_info spi_board_info[] __initdata = { + { + .modalias = "ltv350qv", + .controller_data = (void *)GPIO_PIN_PA(4), + .max_speed_hz = 16000000, + .bus_num = 0, + .chip_select = 1, + }, +}; + /* * The next two functions should go away as the boot loader is * supposed to initialize the macb address registers with a valid @@ -136,6 +149,7 @@ static int __init atstk1002_init(void) set_hw_addr(at32_add_device_eth(0, ð_data[0])); + spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); at32_add_device_spi(0); at32_add_device_lcdc(0, &atstk1000_fb0_data); diff --git a/arch/avr32/boards/atstk1000/spi.c b/arch/avr32/boards/atstk1000/spi.c deleted file mode 100644 index 567726c82c6e..000000000000 --- a/arch/avr32/boards/atstk1000/spi.c +++ /dev/null @@ -1,27 +0,0 @@ -/* - * ATSTK1000 SPI devices - * - * Copyright (C) 2005 Atmel Norway - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include - -static struct spi_board_info spi_board_info[] __initdata = { - { - .modalias = "ltv350qv", - .max_speed_hz = 16000000, - .bus_num = 0, - .chip_select = 1, - }, -}; - -static int board_init_spi(void) -{ - spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); - return 0; -} -arch_initcall(board_init_spi); diff --git a/arch/avr32/mach-at32ap/at32ap7000.c b/arch/avr32/mach-at32ap/at32ap7000.c index 981d553e471b..c1e477ec7576 100644 --- a/arch/avr32/mach-at32ap/at32ap7000.c +++ b/arch/avr32/mach-at32ap/at32ap7000.c @@ -736,12 +736,19 @@ at32_add_device_eth(unsigned int id, struct eth_platform_data *data) /* -------------------------------------------------------------------- * SPI * -------------------------------------------------------------------- */ -static struct resource spi0_resource[] = { +static struct resource atmel_spi0_resource[] = { PBMEM(0xffe00000), IRQ(3), }; -DEFINE_DEV(spi, 0); -DEV_CLK(mck, spi0, pba, 0); +DEFINE_DEV(atmel_spi, 0); +DEV_CLK(spi_clk, atmel_spi0, pba, 0); + +static struct resource atmel_spi1_resource[] = { + PBMEM(0xffe00400), + IRQ(4), +}; +DEFINE_DEV(atmel_spi, 1); +DEV_CLK(spi_clk, atmel_spi1, pba, 1); struct platform_device *__init at32_add_device_spi(unsigned int id) { @@ -749,13 +756,33 @@ struct platform_device *__init at32_add_device_spi(unsigned int id) switch (id) { case 0: - pdev = &spi0_device; + pdev = &atmel_spi0_device; select_peripheral(PA(0), PERIPH_A, 0); /* MISO */ select_peripheral(PA(1), PERIPH_A, 0); /* MOSI */ select_peripheral(PA(2), PERIPH_A, 0); /* SCK */ - select_peripheral(PA(3), PERIPH_A, 0); /* NPCS0 */ - select_peripheral(PA(4), PERIPH_A, 0); /* NPCS1 */ - select_peripheral(PA(5), PERIPH_A, 0); /* NPCS2 */ + + /* NPCS[2:0] */ + at32_select_gpio(GPIO_PIN_PA(3), + AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH); + at32_select_gpio(GPIO_PIN_PA(4), + AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH); + at32_select_gpio(GPIO_PIN_PA(5), + AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH); + break; + + case 1: + pdev = &atmel_spi1_device; + select_peripheral(PB(0), PERIPH_B, 0); /* MISO */ + select_peripheral(PB(1), PERIPH_B, 0); /* MOSI */ + select_peripheral(PB(5), PERIPH_B, 0); /* SCK */ + + /* NPCS[2:0] */ + at32_select_gpio(GPIO_PIN_PB(2), + AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH); + at32_select_gpio(GPIO_PIN_PB(3), + AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH); + at32_select_gpio(GPIO_PIN_PB(4), + AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH); break; default: @@ -877,7 +904,8 @@ struct clk *at32_clock_list[] = { &macb0_pclk, &macb1_hclk, &macb1_pclk, - &spi0_mck, + &atmel_spi0_spi_clk, + &atmel_spi1_spi_clk, &lcdc0_hclk, &lcdc0_pixclk, }; -- cgit v1.2.3 From 9d4ad801372c688c6ae7e080f6fc6f802f53cbe3 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Fri, 9 Feb 2007 11:43:09 +0100 Subject: [AVR32] Remove last remains of libgcc Two libgcc headers were left around even though all the actual code borrowed from libgcc is gone. Delete them. Signed-off-by: Haavard Skinnemoen --- arch/avr32/lib/libgcc.h | 33 ---------------- arch/avr32/lib/longlong.h | 98 ----------------------------------------------- 2 files changed, 131 deletions(-) delete mode 100644 arch/avr32/lib/libgcc.h delete mode 100644 arch/avr32/lib/longlong.h (limited to 'arch') diff --git a/arch/avr32/lib/libgcc.h b/arch/avr32/lib/libgcc.h deleted file mode 100644 index 5a091b5e3618..000000000000 --- a/arch/avr32/lib/libgcc.h +++ /dev/null @@ -1,33 +0,0 @@ -/* Definitions for various functions 'borrowed' from gcc-3.4.3 */ - -#define BITS_PER_UNIT 8 - -typedef int QItype __attribute__ ((mode (QI))); -typedef unsigned int UQItype __attribute__ ((mode (QI))); -typedef int HItype __attribute__ ((mode (HI))); -typedef unsigned int UHItype __attribute__ ((mode (HI))); -typedef int SItype __attribute__ ((mode (SI))); -typedef unsigned int USItype __attribute__ ((mode (SI))); -typedef int DItype __attribute__ ((mode (DI))); -typedef unsigned int UDItype __attribute__ ((mode (DI))); -typedef float SFtype __attribute__ ((mode (SF))); -typedef float DFtype __attribute__ ((mode (DF))); -typedef int word_type __attribute__ ((mode (__word__))); - -#define W_TYPE_SIZE (4 * BITS_PER_UNIT) -#define Wtype SItype -#define UWtype USItype -#define HWtype SItype -#define UHWtype USItype -#define DWtype DItype -#define UDWtype UDItype -#define __NW(a,b) __ ## a ## si ## b -#define __NDW(a,b) __ ## a ## di ## b - -struct DWstruct {Wtype high, low;}; - -typedef union -{ - struct DWstruct s; - DWtype ll; -} DWunion; diff --git a/arch/avr32/lib/longlong.h b/arch/avr32/lib/longlong.h deleted file mode 100644 index cd5e369ac437..000000000000 --- a/arch/avr32/lib/longlong.h +++ /dev/null @@ -1,98 +0,0 @@ -/* longlong.h -- definitions for mixed size 32/64 bit arithmetic. - Copyright (C) 1991, 1992, 1994, 1995, 1996, 1997, 1998, 1999, 2000 - Free Software Foundation, Inc. - - This definition file is free software; you can redistribute it - and/or modify it under the terms of the GNU General Public - License as published by the Free Software Foundation; either - version 2, or (at your option) any later version. - - This definition file is distributed in the hope that it will be - useful, but WITHOUT ANY WARRANTY; without even the implied - warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - See the GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 59 Temple Place - Suite 330, - Boston, MA 02111-1307, USA. */ - -/* Borrowed from gcc-3.4.3 */ - -#define __BITS4 (W_TYPE_SIZE / 4) -#define __ll_B ((UWtype) 1 << (W_TYPE_SIZE / 2)) -#define __ll_lowpart(t) ((UWtype) (t) & (__ll_B - 1)) -#define __ll_highpart(t) ((UWtype) (t) >> (W_TYPE_SIZE / 2)) - -#define count_leading_zeros(count, x) ((count) = __builtin_clz(x)) - -#define __udiv_qrnnd_c(q, r, n1, n0, d) \ - do { \ - UWtype __d1, __d0, __q1, __q0; \ - UWtype __r1, __r0, __m; \ - __d1 = __ll_highpart (d); \ - __d0 = __ll_lowpart (d); \ - \ - __r1 = (n1) % __d1; \ - __q1 = (n1) / __d1; \ - __m = (UWtype) __q1 * __d0; \ - __r1 = __r1 * __ll_B | __ll_highpart (n0); \ - if (__r1 < __m) \ - { \ - __q1--, __r1 += (d); \ - if (__r1 >= (d)) /* i.e. we didn't get carry when adding to __r1 */\ - if (__r1 < __m) \ - __q1--, __r1 += (d); \ - } \ - __r1 -= __m; \ - \ - __r0 = __r1 % __d1; \ - __q0 = __r1 / __d1; \ - __m = (UWtype) __q0 * __d0; \ - __r0 = __r0 * __ll_B | __ll_lowpart (n0); \ - if (__r0 < __m) \ - { \ - __q0--, __r0 += (d); \ - if (__r0 >= (d)) \ - if (__r0 < __m) \ - __q0--, __r0 += (d); \ - } \ - __r0 -= __m; \ - \ - (q) = (UWtype) __q1 * __ll_B | __q0; \ - (r) = __r0; \ - } while (0) - -#define udiv_qrnnd __udiv_qrnnd_c - -#define sub_ddmmss(sh, sl, ah, al, bh, bl) \ - do { \ - UWtype __x; \ - __x = (al) - (bl); \ - (sh) = (ah) - (bh) - (__x > (al)); \ - (sl) = __x; \ - } while (0) - -#define umul_ppmm(w1, w0, u, v) \ - do { \ - UWtype __x0, __x1, __x2, __x3; \ - UHWtype __ul, __vl, __uh, __vh; \ - \ - __ul = __ll_lowpart (u); \ - __uh = __ll_highpart (u); \ - __vl = __ll_lowpart (v); \ - __vh = __ll_highpart (v); \ - \ - __x0 = (UWtype) __ul * __vl; \ - __x1 = (UWtype) __ul * __vh; \ - __x2 = (UWtype) __uh * __vl; \ - __x3 = (UWtype) __uh * __vh; \ - \ - __x1 += __ll_highpart (__x0);/* this can't give carry */ \ - __x1 += __x2; /* but this indeed can */ \ - if (__x1 < __x2) /* did we get it? */ \ - __x3 += __ll_B; /* yes, add it in the proper pos. */ \ - \ - (w1) = __x3 + __ll_highpart (__x1); \ - (w0) = __ll_lowpart (__x1) * __ll_B + __ll_lowpart (__x0); \ - } while (0) -- cgit v1.2.3 From 4ffabefb456f140eb47c7294e9158a9027a64ccc Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Fri, 9 Feb 2007 15:23:46 +0100 Subject: [AVR32] Add missing #include arch/avr32/kernel/cpu.c needs THIS_MODULE, so it must include linux/module.h. Signed-off-by: Haavard Skinnemoen --- arch/avr32/kernel/cpu.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/avr32/kernel/cpu.c b/arch/avr32/kernel/cpu.c index 342452ba2049..2e72fd2699df 100644 --- a/arch/avr32/kernel/cpu.c +++ b/arch/avr32/kernel/cpu.c @@ -9,6 +9,7 @@ #include #include #include +#include #include #include #include -- cgit v1.2.3 From 8dabba5d1a8f1893bc3db9bf66007de2020c8b62 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Fri, 9 Feb 2007 09:30:05 -0600 Subject: [POWERPC] Fix is_power_of_4(x) compile error When building an 85xx kernel we get: CC arch/powerpc/mm/pgtable_32.o arch/powerpc/mm/pgtable_32.c: In function 'io_block_mapping': arch/powerpc/mm/pgtable_32.c:330: error: expected identifier before '(' token arch/powerpc/mm/pgtable_32.c:330: error: expected statement before ')' token The is_power_of_2(x) fixup patch left an extra ')' on the is_power_of_4 macro. There is a similiar issue on the arch/ppc side. Signed-off-by: Kumar Gala --- arch/powerpc/mm/pgtable_32.c | 2 +- arch/ppc/mm/pgtable.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c index bd02272bcb0f..c284bdac9947 100644 --- a/arch/powerpc/mm/pgtable_32.c +++ b/arch/powerpc/mm/pgtable_32.c @@ -295,7 +295,7 @@ void __init mapin_ram(void) } /* is x a power of 4? */ -#define is_power_of_4(x) is_power_of_2(x) && (ffs(x) & 1)) +#define is_power_of_4(x) is_power_of_2(x) && (ffs(x) & 1) /* * Set up a mapping for a block of I/O. diff --git a/arch/ppc/mm/pgtable.c b/arch/ppc/mm/pgtable.c index 82b06a1ef95d..c023b7298809 100644 --- a/arch/ppc/mm/pgtable.c +++ b/arch/ppc/mm/pgtable.c @@ -314,7 +314,7 @@ void __init mapin_ram(void) } /* is x a power of 4? */ -#define is_power_of_4(x) is_power_of_2(x) && (ffs(x) & 1)) +#define is_power_of_4(x) is_power_of_2(x) && (ffs(x) & 1) /* * Set up a mapping for a block of I/O. -- cgit v1.2.3 From 27630bec9478a2dd387c68b5e435ed3fdd3a513e Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Fri, 9 Feb 2007 09:30:45 -0600 Subject: [POWERPC] 85xx: Marked functions static Marked a number of functions in 85xx board code as static. Also, some minor whitespace cleanup Signed-off-by: Kumar Gala --- arch/powerpc/platforms/85xx/mpc85xx_ads.c | 7 +++---- arch/powerpc/platforms/85xx/mpc85xx_cds.c | 17 +++++------------ 2 files changed, 8 insertions(+), 16 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c index bda2e55e6c4c..c56fce57621c 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c @@ -45,8 +45,7 @@ unsigned long isa_mem_base = 0; #endif #ifdef CONFIG_PCI -int -mpc85xx_exclude_device(u_char bus, u_char devfn) +static int mpc85xx_exclude_device(u_char bus, u_char devfn) { if (bus == 0 && PCI_SLOT(devfn) == 0) return PCIBIOS_DEVICE_NOT_FOUND; @@ -69,7 +68,7 @@ static void cpm2_cascade(unsigned int irq, struct irq_desc *desc) #endif /* CONFIG_CPM2 */ -void __init mpc85xx_ads_pic_init(void) +static void __init mpc85xx_ads_pic_init(void) { struct mpic *mpic; struct resource r; @@ -254,7 +253,7 @@ static void __init mpc85xx_ads_setup_arch(void) #endif } -void mpc85xx_ads_show_cpuinfo(struct seq_file *m) +static void mpc85xx_ads_show_cpuinfo(struct seq_file *m) { uint pvid, svid, phid1; uint memsize = total_memory; diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c index 953cd5dd3f54..abc0aca6de40 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c @@ -56,7 +56,6 @@ unsigned long isa_mem_base = 0; static int cds_pci_slot = 2; static volatile u8 *cadmus; - #ifdef CONFIG_PCI #define ARCADIA_HOST_BRIDGE_IDSEL 17 @@ -64,8 +63,7 @@ static volatile u8 *cadmus; extern int mpc85xx_pci2_busno; -int -mpc85xx_exclude_device(u_char bus, u_char devfn) +static int mpc85xx_exclude_device(u_char bus, u_char devfn) { if (bus == 0 && PCI_SLOT(devfn) == 0) return PCIBIOS_DEVICE_NOT_FOUND; @@ -81,8 +79,7 @@ mpc85xx_exclude_device(u_char bus, u_char devfn) return PCIBIOS_SUCCESSFUL; } -void __init -mpc85xx_cds_pcibios_fixup(void) +static void __init mpc85xx_cds_pcibios_fixup(void) { struct pci_dev *dev; u_char c; @@ -144,7 +141,7 @@ static void mpc85xx_8259_cascade(unsigned int irq, struct irq_desc *desc) #endif /* PPC_I8259 */ #endif /* CONFIG_PCI */ -void __init mpc85xx_cds_pic_init(void) +static void __init mpc85xx_cds_pic_init(void) { struct mpic *mpic; struct resource r; @@ -224,12 +221,10 @@ void __init mpc85xx_cds_pic_init(void) #endif /* CONFIG_PPC_I8259 */ } - /* * Setup the architecture */ -static void __init -mpc85xx_cds_setup_arch(void) +static void __init mpc85xx_cds_setup_arch(void) { struct device_node *cpu; #ifdef CONFIG_PCI @@ -276,9 +271,7 @@ mpc85xx_cds_setup_arch(void) #endif } - -void -mpc85xx_cds_show_cpuinfo(struct seq_file *m) +static void mpc85xx_cds_show_cpuinfo(struct seq_file *m) { uint pvid, svid, phid1; uint memsize = total_memory; -- cgit v1.2.3 From 862a7284980d809a583e9a34c774fab84e0a46f8 Mon Sep 17 00:00:00 2001 From: Rojhalat Ibrahim Date: Fri, 9 Feb 2007 15:10:38 +0100 Subject: [PPC] Fix compile error for e500 core based processors We get the following compiler error: CC arch/ppc/kernel/ppc_ksyms.o arch/ppc/kernel/ppc_ksyms.c:275: error: '__mtdcr' undeclared here (not in a function) arch/ppc/kernel/ppc_ksyms.c:275: warning: type defaults to 'int' in declaration of '__mtdcr' arch/ppc/kernel/ppc_ksyms.c:276: error: '__mfdcr' undeclared here (not in a function) arch/ppc/kernel/ppc_ksyms.c:276: warning: type defaults to 'int' in declaration of '__mfdcr' make[1]: *** [arch/ppc/kernel/ppc_ksyms.o] Error 1 This is due to the EXPORT_SYMBOL for __mtdcr/__mfdcr not having the proper CONFIG protection Signed-off-by: Rojhalat Ibrahim Signed-off-by: Kumar Gala --- arch/ppc/kernel/ppc_ksyms.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c index 1f49503317cb..1318b6f4c3df 100644 --- a/arch/ppc/kernel/ppc_ksyms.c +++ b/arch/ppc/kernel/ppc_ksyms.c @@ -271,7 +271,7 @@ EXPORT_SYMBOL(mmu_hash_lock); /* For MOL */ extern long *intercept_table; EXPORT_SYMBOL(intercept_table); #endif /* CONFIG_PPC_STD_MMU */ -#if defined(CONFIG_40x) || defined(CONFIG_BOOKE) +#ifdef CONFIG_PPC_DCR_NATIVE EXPORT_SYMBOL(__mtdcr); EXPORT_SYMBOL(__mfdcr); #endif -- cgit v1.2.3 From 33cf45b90eb73e1f3b784b50691d74f7ea381b21 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Mon, 5 Feb 2007 16:28:26 -0800 Subject: [TC] TURBOchannel support for the DECstation This is the platform-specific part of TURBOchannel bus support for the DECstation. It implements determining whether the bus is actually there, getting bus parameters, IRQ assignments for devices and protected accesses to possibly unoccupied slots that may trigger bus error exceptions. Signed-off-by: Maciej W. Rozycki Signed-off-by: Andrew Morton Signed-off-by: Ralf Baechle --- arch/mips/dec/Makefile | 1 + arch/mips/dec/prom/identify.c | 3 ++ arch/mips/dec/setup.c | 2 + arch/mips/dec/tc.c | 95 +++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 101 insertions(+) create mode 100644 arch/mips/dec/tc.c (limited to 'arch') diff --git a/arch/mips/dec/Makefile b/arch/mips/dec/Makefile index ed181fdc3ac9..8b790c2900d5 100644 --- a/arch/mips/dec/Makefile +++ b/arch/mips/dec/Makefile @@ -6,6 +6,7 @@ obj-y := ecc-berr.o int-handler.o ioasic-irq.o kn01-berr.o \ kn02-irq.o kn02xa-berr.o reset.o setup.o time.o obj-$(CONFIG_PROM_CONSOLE) += promcon.o +obj-$(CONFIG_TC) += tc.o obj-$(CONFIG_CPU_HAS_WB) += wbflush.o EXTRA_AFLAGS := $(CFLAGS) diff --git a/arch/mips/dec/prom/identify.c b/arch/mips/dec/prom/identify.c index 81d5e878ddce..c4e3c1ea0d48 100644 --- a/arch/mips/dec/prom/identify.c +++ b/arch/mips/dec/prom/identify.c @@ -88,6 +88,7 @@ static inline void prom_init_kn02(void) { dec_kn_slot_base = KN02_SLOT_BASE; dec_kn_slot_size = KN02_SLOT_SIZE; + dec_tc_bus = 1; dec_rtc_base = (void *)CKSEG1ADDR(dec_kn_slot_base + KN02_RTC); } @@ -96,6 +97,7 @@ static inline void prom_init_kn02xa(void) { dec_kn_slot_base = KN02XA_SLOT_BASE; dec_kn_slot_size = IOASIC_SLOT_SIZE; + dec_tc_bus = 1; ioasic_base = (void *)CKSEG1ADDR(dec_kn_slot_base + IOASIC_IOCTL); dec_rtc_base = (void *)CKSEG1ADDR(dec_kn_slot_base + IOASIC_TOY); @@ -105,6 +107,7 @@ static inline void prom_init_kn03(void) { dec_kn_slot_base = KN03_SLOT_BASE; dec_kn_slot_size = IOASIC_SLOT_SIZE; + dec_tc_bus = 1; ioasic_base = (void *)CKSEG1ADDR(dec_kn_slot_base + IOASIC_IOCTL); dec_rtc_base = (void *)CKSEG1ADDR(dec_kn_slot_base + IOASIC_TOY); diff --git a/arch/mips/dec/setup.c b/arch/mips/dec/setup.c index 1058e2f409bb..b8a5e75ba0ab 100644 --- a/arch/mips/dec/setup.c +++ b/arch/mips/dec/setup.c @@ -53,6 +53,8 @@ unsigned long dec_kn_slot_base, dec_kn_slot_size; EXPORT_SYMBOL(dec_kn_slot_base); EXPORT_SYMBOL(dec_kn_slot_size); +int dec_tc_bus; + spinlock_t ioasic_ssr_lock; volatile u32 *ioasic_base; diff --git a/arch/mips/dec/tc.c b/arch/mips/dec/tc.c new file mode 100644 index 000000000000..732027c79834 --- /dev/null +++ b/arch/mips/dec/tc.c @@ -0,0 +1,95 @@ +/* + * TURBOchannel architecture calls. + * + * Copyright (c) Harald Koerfgen, 1998 + * Copyright (c) 2001, 2003, 2005, 2006 Maciej W. Rozycki + * Copyright (c) 2005 James Simmons + * + * This file is subject to the terms and conditions of the GNU + * General Public License. See the file "COPYING" in the main + * directory of this archive for more details. + */ +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +/* + * Protected read byte from TURBOchannel slot space. + */ +int tc_preadb(u8 *valp, void __iomem *addr) +{ + return get_dbe(*valp, (u8 *)addr); +} + +/* + * Get TURBOchannel bus information as specified by the spec, plus + * the slot space base address and the number of slots. + */ +int __init tc_bus_get_info(struct tc_bus *tbus) +{ + if (!dec_tc_bus) + return -ENXIO; + + memcpy(&tbus->info, rex_gettcinfo(), sizeof(tbus->info)); + tbus->slot_base = CPHYSADDR((long)rex_slot_address(0)); + + switch (mips_machtype) { + case MACH_DS5000_200: + tbus->num_tcslots = 7; + break; + case MACH_DS5000_2X0: + case MACH_DS5900: + tbus->ext_slot_base = 0x20000000; + tbus->ext_slot_size = 0x20000000; + /* fall through */ + case MACH_DS5000_1XX: + tbus->num_tcslots = 3; + break; + case MACH_DS5000_XX: + tbus->num_tcslots = 2; + default: + break; + } + return 0; +} + +/* + * Get the IRQ for the specified slot. + */ +void __init tc_device_get_irq(struct tc_dev *tdev) +{ + switch (tdev->slot) { + case 0: + tdev->interrupt = dec_interrupt[DEC_IRQ_TC0]; + break; + case 1: + tdev->interrupt = dec_interrupt[DEC_IRQ_TC1]; + break; + case 2: + tdev->interrupt = dec_interrupt[DEC_IRQ_TC2]; + break; + /* + * Yuck! DS5000/200 onboard devices + */ + case 5: + tdev->interrupt = dec_interrupt[DEC_IRQ_TC5]; + break; + case 6: + tdev->interrupt = dec_interrupt[DEC_IRQ_TC6]; + break; + default: + tdev->interrupt = -1; + break; + } +} -- cgit v1.2.3 From 9288f5c3f190ef5ee8e50b27e8ae1152f19061e4 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 9 Feb 2007 16:05:27 +0000 Subject: [PATCH] ps3: missing exports Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/powerpc/platforms/ps3/interrupt.c | 2 ++ arch/powerpc/platforms/ps3/system-bus.c | 2 ++ 2 files changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/platforms/ps3/interrupt.c b/arch/powerpc/platforms/ps3/interrupt.c index bb17283275aa..631c30095617 100644 --- a/arch/powerpc/platforms/ps3/interrupt.c +++ b/arch/powerpc/platforms/ps3/interrupt.c @@ -194,6 +194,7 @@ int ps3_alloc_io_irq(enum ps3_cpu_binding cpu, unsigned int interrupt_id, return result; } +EXPORT_SYMBOL_GPL(ps3_alloc_io_irq); int ps3_free_io_irq(unsigned int virq) { @@ -209,6 +210,7 @@ int ps3_free_io_irq(unsigned int virq) return result; } +EXPORT_SYMBOL_GPL(ps3_free_io_irq); /** * ps3_alloc_event_irq - Allocate a virq for use with a system event. diff --git a/arch/powerpc/platforms/ps3/system-bus.c b/arch/powerpc/platforms/ps3/system-bus.c index bce6136cbce7..a9f7e4a39a2a 100644 --- a/arch/powerpc/platforms/ps3/system-bus.c +++ b/arch/powerpc/platforms/ps3/system-bus.c @@ -57,6 +57,7 @@ int ps3_mmio_region_create(struct ps3_mmio_region *r) dump_mmio_region(r); return result; } +EXPORT_SYMBOL_GPL(ps3_mmio_region_create); int ps3_free_mmio_region(struct ps3_mmio_region *r) { @@ -72,6 +73,7 @@ int ps3_free_mmio_region(struct ps3_mmio_region *r) r->lpar_addr = 0; return result; } +EXPORT_SYMBOL_GPL(ps3_free_mmio_region); static int ps3_system_bus_match(struct device *_dev, struct device_driver *_drv) -- cgit v1.2.3 From 75e7153abd220f1c4a731a9613fb705485b56aa8 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 9 Feb 2007 17:08:58 +0000 Subject: [APM] ARM: Convert to use shared APM emulation. Signed-off-by: Ralf Baechle --- arch/arm/Kconfig | 29 +- arch/arm/common/sharpsl_pm.c | 2 +- arch/arm/kernel/Makefile | 1 - arch/arm/kernel/apm.c | 672 ----------------------------------------- arch/arm/mach-pxa/corgi_pm.c | 2 +- arch/arm/mach-pxa/sharpsl_pm.c | 2 +- arch/arm/mach-pxa/spitz_pm.c | 2 +- 7 files changed, 8 insertions(+), 702 deletions(-) delete mode 100644 arch/arm/kernel/apm.c (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 6783c2e5512d..1523046e092b 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -9,6 +9,7 @@ config ARM bool default y select RTC_LIB + select SYS_SUPPORTS_APM_EMULATION help The ARM series is a line of low-power-consumption RISC chip designs licensed by ARM Ltd and targeted at embedded applications and @@ -17,6 +18,9 @@ config ARM Europe. There is an ARM Linux project with a web page at . +config SYS_SUPPORTS_APM_EMULATION + bool + config GENERIC_TIME bool default n @@ -856,31 +860,6 @@ menu "Power management options" source "kernel/power/Kconfig" -config APM - tristate "Advanced Power Management Emulation" - ---help--- - APM is a BIOS specification for saving power using several different - techniques. This is mostly useful for battery powered laptops with - APM compliant BIOSes. If you say Y here, the system time will be - reset after a RESUME operation, the /proc/apm device will provide - battery status information, and user-space programs will receive - notification of APM "events" (e.g. battery status change). - - In order to use APM, you will need supporting software. For location - and more information, read and the - Battery Powered Linux mini-HOWTO, available from - . - - This driver does not spin down disk drives (see the hdparm(8) - manpage ("man 8 hdparm") for that), and it doesn't turn off - VESA-compliant "green" monitors. - - Generally, if you don't have a battery in your machine, there isn't - much point in using this driver and you should say N. If you get - random kernel OOPSes or reboots that don't seem to be related to - anything, try disabling/enabling this option (or disabling/enabling - APM in your BIOS). - endmenu source "net/Kconfig" diff --git a/arch/arm/common/sharpsl_pm.c b/arch/arm/common/sharpsl_pm.c index b3599743093b..a3b450f8ef17 100644 --- a/arch/arm/common/sharpsl_pm.c +++ b/arch/arm/common/sharpsl_pm.c @@ -27,7 +27,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index ab06a86e85d5..1b935fb94b83 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -10,7 +10,6 @@ obj-y := compat.o entry-armv.o entry-common.o irq.o \ process.o ptrace.o semaphore.o setup.o signal.o sys_arm.o \ time.o traps.o -obj-$(CONFIG_APM) += apm.o obj-$(CONFIG_ISA_DMA_API) += dma.o obj-$(CONFIG_ARCH_ACORN) += ecard.o obj-$(CONFIG_FIQ) += fiq.o diff --git a/arch/arm/kernel/apm.c b/arch/arm/kernel/apm.c deleted file mode 100644 index 2c37b70b17ab..000000000000 --- a/arch/arm/kernel/apm.c +++ /dev/null @@ -1,672 +0,0 @@ -/* - * bios-less APM driver for ARM Linux - * Jamey Hicks - * adapted from the APM BIOS driver for Linux by Stephen Rothwell (sfr@linuxcare.com) - * - * APM 1.2 Reference: - * Intel Corporation, Microsoft Corporation. Advanced Power Management - * (APM) BIOS Interface Specification, Revision 1.2, February 1996. - * - * [This document is available from Microsoft at: - * http://www.microsoft.com/hwdev/busbios/amp_12.htm] - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include /* apm_power_info */ -#include - -/* - * The apm_bios device is one of the misc char devices. - * This is its minor number. - */ -#define APM_MINOR_DEV 134 - -/* - * See Documentation/Config.help for the configuration options. - * - * Various options can be changed at boot time as follows: - * (We allow underscores for compatibility with the modules code) - * apm=on/off enable/disable APM - */ - -/* - * Maximum number of events stored - */ -#define APM_MAX_EVENTS 16 - -struct apm_queue { - unsigned int event_head; - unsigned int event_tail; - apm_event_t events[APM_MAX_EVENTS]; -}; - -/* - * The per-file APM data - */ -struct apm_user { - struct list_head list; - - unsigned int suser: 1; - unsigned int writer: 1; - unsigned int reader: 1; - - int suspend_result; - unsigned int suspend_state; -#define SUSPEND_NONE 0 /* no suspend pending */ -#define SUSPEND_PENDING 1 /* suspend pending read */ -#define SUSPEND_READ 2 /* suspend read, pending ack */ -#define SUSPEND_ACKED 3 /* suspend acked */ -#define SUSPEND_WAIT 4 /* waiting for suspend */ -#define SUSPEND_DONE 5 /* suspend completed */ - - struct apm_queue queue; -}; - -/* - * Local variables - */ -static int suspends_pending; -static int apm_disabled; -static struct task_struct *kapmd_tsk; - -static DECLARE_WAIT_QUEUE_HEAD(apm_waitqueue); -static DECLARE_WAIT_QUEUE_HEAD(apm_suspend_waitqueue); - -/* - * This is a list of everyone who has opened /dev/apm_bios - */ -static DECLARE_RWSEM(user_list_lock); -static LIST_HEAD(apm_user_list); - -/* - * kapmd info. kapmd provides us a process context to handle - * "APM" events within - specifically necessary if we're going - * to be suspending the system. - */ -static DECLARE_WAIT_QUEUE_HEAD(kapmd_wait); -static DEFINE_SPINLOCK(kapmd_queue_lock); -static struct apm_queue kapmd_queue; - -static DEFINE_MUTEX(state_lock); - -static const char driver_version[] = "1.13"; /* no spaces */ - - - -/* - * Compatibility cruft until the IPAQ people move over to the new - * interface. - */ -static void __apm_get_power_status(struct apm_power_info *info) -{ -} - -/* - * This allows machines to provide their own "apm get power status" function. - */ -void (*apm_get_power_status)(struct apm_power_info *) = __apm_get_power_status; -EXPORT_SYMBOL(apm_get_power_status); - - -/* - * APM event queue management. - */ -static inline int queue_empty(struct apm_queue *q) -{ - return q->event_head == q->event_tail; -} - -static inline apm_event_t queue_get_event(struct apm_queue *q) -{ - q->event_tail = (q->event_tail + 1) % APM_MAX_EVENTS; - return q->events[q->event_tail]; -} - -static void queue_add_event(struct apm_queue *q, apm_event_t event) -{ - q->event_head = (q->event_head + 1) % APM_MAX_EVENTS; - if (q->event_head == q->event_tail) { - static int notified; - - if (notified++ == 0) - printk(KERN_ERR "apm: an event queue overflowed\n"); - q->event_tail = (q->event_tail + 1) % APM_MAX_EVENTS; - } - q->events[q->event_head] = event; -} - -static void queue_event(apm_event_t event) -{ - struct apm_user *as; - - down_read(&user_list_lock); - list_for_each_entry(as, &apm_user_list, list) { - if (as->reader) - queue_add_event(&as->queue, event); - } - up_read(&user_list_lock); - wake_up_interruptible(&apm_waitqueue); -} - -/* - * queue_suspend_event - queue an APM suspend event. - * - * Check that we're in a state where we can suspend. If not, - * return -EBUSY. Otherwise, queue an event to all "writer" - * users. If there are no "writer" users, return '1' to - * indicate that we can immediately suspend. - */ -static int queue_suspend_event(apm_event_t event, struct apm_user *sender) -{ - struct apm_user *as; - int ret = 1; - - mutex_lock(&state_lock); - down_read(&user_list_lock); - - /* - * If a thread is still processing, we can't suspend, so reject - * the request. - */ - list_for_each_entry(as, &apm_user_list, list) { - if (as != sender && as->reader && as->writer && as->suser && - as->suspend_state != SUSPEND_NONE) { - ret = -EBUSY; - goto out; - } - } - - list_for_each_entry(as, &apm_user_list, list) { - if (as != sender && as->reader && as->writer && as->suser) { - as->suspend_state = SUSPEND_PENDING; - suspends_pending++; - queue_add_event(&as->queue, event); - ret = 0; - } - } - out: - up_read(&user_list_lock); - mutex_unlock(&state_lock); - wake_up_interruptible(&apm_waitqueue); - return ret; -} - -static void apm_suspend(void) -{ - struct apm_user *as; - int err = pm_suspend(PM_SUSPEND_MEM); - - /* - * Anyone on the APM queues will think we're still suspended. - * Send a message so everyone knows we're now awake again. - */ - queue_event(APM_NORMAL_RESUME); - - /* - * Finally, wake up anyone who is sleeping on the suspend. - */ - mutex_lock(&state_lock); - down_read(&user_list_lock); - list_for_each_entry(as, &apm_user_list, list) { - if (as->suspend_state == SUSPEND_WAIT || - as->suspend_state == SUSPEND_ACKED) { - as->suspend_result = err; - as->suspend_state = SUSPEND_DONE; - } - } - up_read(&user_list_lock); - mutex_unlock(&state_lock); - - wake_up(&apm_suspend_waitqueue); -} - -static ssize_t apm_read(struct file *fp, char __user *buf, size_t count, loff_t *ppos) -{ - struct apm_user *as = fp->private_data; - apm_event_t event; - int i = count, ret = 0; - - if (count < sizeof(apm_event_t)) - return -EINVAL; - - if (queue_empty(&as->queue) && fp->f_flags & O_NONBLOCK) - return -EAGAIN; - - wait_event_interruptible(apm_waitqueue, !queue_empty(&as->queue)); - - while ((i >= sizeof(event)) && !queue_empty(&as->queue)) { - event = queue_get_event(&as->queue); - - ret = -EFAULT; - if (copy_to_user(buf, &event, sizeof(event))) - break; - - mutex_lock(&state_lock); - if (as->suspend_state == SUSPEND_PENDING && - (event == APM_SYS_SUSPEND || event == APM_USER_SUSPEND)) - as->suspend_state = SUSPEND_READ; - mutex_unlock(&state_lock); - - buf += sizeof(event); - i -= sizeof(event); - } - - if (i < count) - ret = count - i; - - return ret; -} - -static unsigned int apm_poll(struct file *fp, poll_table * wait) -{ - struct apm_user *as = fp->private_data; - - poll_wait(fp, &apm_waitqueue, wait); - return queue_empty(&as->queue) ? 0 : POLLIN | POLLRDNORM; -} - -/* - * apm_ioctl - handle APM ioctl - * - * APM_IOC_SUSPEND - * This IOCTL is overloaded, and performs two functions. It is used to: - * - initiate a suspend - * - acknowledge a suspend read from /dev/apm_bios. - * Only when everyone who has opened /dev/apm_bios with write permission - * has acknowledge does the actual suspend happen. - */ -static int -apm_ioctl(struct inode * inode, struct file *filp, u_int cmd, u_long arg) -{ - struct apm_user *as = filp->private_data; - unsigned long flags; - int err = -EINVAL; - - if (!as->suser || !as->writer) - return -EPERM; - - switch (cmd) { - case APM_IOC_SUSPEND: - mutex_lock(&state_lock); - - as->suspend_result = -EINTR; - - if (as->suspend_state == SUSPEND_READ) { - int pending; - - /* - * If we read a suspend command from /dev/apm_bios, - * then the corresponding APM_IOC_SUSPEND ioctl is - * interpreted as an acknowledge. - */ - as->suspend_state = SUSPEND_ACKED; - suspends_pending--; - pending = suspends_pending == 0; - mutex_unlock(&state_lock); - - /* - * If there are no further acknowledges required, - * suspend the system. - */ - if (pending) - apm_suspend(); - - /* - * Wait for the suspend/resume to complete. If there - * are pending acknowledges, we wait here for them. - * - * Note: we need to ensure that the PM subsystem does - * not kick us out of the wait when it suspends the - * threads. - */ - flags = current->flags; - current->flags |= PF_NOFREEZE; - - wait_event(apm_suspend_waitqueue, - as->suspend_state == SUSPEND_DONE); - } else { - as->suspend_state = SUSPEND_WAIT; - mutex_unlock(&state_lock); - - /* - * Otherwise it is a request to suspend the system. - * Queue an event for all readers, and expect an - * acknowledge from all writers who haven't already - * acknowledged. - */ - err = queue_suspend_event(APM_USER_SUSPEND, as); - if (err < 0) { - /* - * Avoid taking the lock here - this - * should be fine. - */ - as->suspend_state = SUSPEND_NONE; - break; - } - - if (err > 0) - apm_suspend(); - - /* - * Wait for the suspend/resume to complete. If there - * are pending acknowledges, we wait here for them. - * - * Note: we need to ensure that the PM subsystem does - * not kick us out of the wait when it suspends the - * threads. - */ - flags = current->flags; - current->flags |= PF_NOFREEZE; - - wait_event_interruptible(apm_suspend_waitqueue, - as->suspend_state == SUSPEND_DONE); - } - - current->flags = flags; - - mutex_lock(&state_lock); - err = as->suspend_result; - as->suspend_state = SUSPEND_NONE; - mutex_unlock(&state_lock); - break; - } - - return err; -} - -static int apm_release(struct inode * inode, struct file * filp) -{ - struct apm_user *as = filp->private_data; - int pending = 0; - - filp->private_data = NULL; - - down_write(&user_list_lock); - list_del(&as->list); - up_write(&user_list_lock); - - /* - * We are now unhooked from the chain. As far as new - * events are concerned, we no longer exist. However, we - * need to balance suspends_pending, which means the - * possibility of sleeping. - */ - mutex_lock(&state_lock); - if (as->suspend_state != SUSPEND_NONE) { - suspends_pending -= 1; - pending = suspends_pending == 0; - } - mutex_unlock(&state_lock); - if (pending) - apm_suspend(); - - kfree(as); - return 0; -} - -static int apm_open(struct inode * inode, struct file * filp) -{ - struct apm_user *as; - - as = kzalloc(sizeof(*as), GFP_KERNEL); - if (as) { - /* - * XXX - this is a tiny bit broken, when we consider BSD - * process accounting. If the device is opened by root, we - * instantly flag that we used superuser privs. Who knows, - * we might close the device immediately without doing a - * privileged operation -- cevans - */ - as->suser = capable(CAP_SYS_ADMIN); - as->writer = (filp->f_mode & FMODE_WRITE) == FMODE_WRITE; - as->reader = (filp->f_mode & FMODE_READ) == FMODE_READ; - - down_write(&user_list_lock); - list_add(&as->list, &apm_user_list); - up_write(&user_list_lock); - - filp->private_data = as; - } - - return as ? 0 : -ENOMEM; -} - -static struct file_operations apm_bios_fops = { - .owner = THIS_MODULE, - .read = apm_read, - .poll = apm_poll, - .ioctl = apm_ioctl, - .open = apm_open, - .release = apm_release, -}; - -static struct miscdevice apm_device = { - .minor = APM_MINOR_DEV, - .name = "apm_bios", - .fops = &apm_bios_fops -}; - - -#ifdef CONFIG_PROC_FS -/* - * Arguments, with symbols from linux/apm_bios.h. - * - * 0) Linux driver version (this will change if format changes) - * 1) APM BIOS Version. Usually 1.0, 1.1 or 1.2. - * 2) APM flags from APM Installation Check (0x00): - * bit 0: APM_16_BIT_SUPPORT - * bit 1: APM_32_BIT_SUPPORT - * bit 2: APM_IDLE_SLOWS_CLOCK - * bit 3: APM_BIOS_DISABLED - * bit 4: APM_BIOS_DISENGAGED - * 3) AC line status - * 0x00: Off-line - * 0x01: On-line - * 0x02: On backup power (BIOS >= 1.1 only) - * 0xff: Unknown - * 4) Battery status - * 0x00: High - * 0x01: Low - * 0x02: Critical - * 0x03: Charging - * 0x04: Selected battery not present (BIOS >= 1.2 only) - * 0xff: Unknown - * 5) Battery flag - * bit 0: High - * bit 1: Low - * bit 2: Critical - * bit 3: Charging - * bit 7: No system battery - * 0xff: Unknown - * 6) Remaining battery life (percentage of charge): - * 0-100: valid - * -1: Unknown - * 7) Remaining battery life (time units): - * Number of remaining minutes or seconds - * -1: Unknown - * 8) min = minutes; sec = seconds - */ -static int apm_get_info(char *buf, char **start, off_t fpos, int length) -{ - struct apm_power_info info; - char *units; - int ret; - - info.ac_line_status = 0xff; - info.battery_status = 0xff; - info.battery_flag = 0xff; - info.battery_life = -1; - info.time = -1; - info.units = -1; - - if (apm_get_power_status) - apm_get_power_status(&info); - - switch (info.units) { - default: units = "?"; break; - case 0: units = "min"; break; - case 1: units = "sec"; break; - } - - ret = sprintf(buf, "%s 1.2 0x%02x 0x%02x 0x%02x 0x%02x %d%% %d %s\n", - driver_version, APM_32_BIT_SUPPORT, - info.ac_line_status, info.battery_status, - info.battery_flag, info.battery_life, - info.time, units); - - return ret; -} -#endif - -static int kapmd(void *arg) -{ - do { - apm_event_t event; - int ret; - - wait_event_interruptible(kapmd_wait, - !queue_empty(&kapmd_queue) || kthread_should_stop()); - - if (kthread_should_stop()) - break; - - spin_lock_irq(&kapmd_queue_lock); - event = 0; - if (!queue_empty(&kapmd_queue)) - event = queue_get_event(&kapmd_queue); - spin_unlock_irq(&kapmd_queue_lock); - - switch (event) { - case 0: - break; - - case APM_LOW_BATTERY: - case APM_POWER_STATUS_CHANGE: - queue_event(event); - break; - - case APM_USER_SUSPEND: - case APM_SYS_SUSPEND: - ret = queue_suspend_event(event, NULL); - if (ret < 0) { - /* - * We were busy. Try again in 50ms. - */ - queue_add_event(&kapmd_queue, event); - msleep(50); - } - if (ret > 0) - apm_suspend(); - break; - - case APM_CRITICAL_SUSPEND: - apm_suspend(); - break; - } - } while (1); - - return 0; -} - -static int __init apm_init(void) -{ - int ret; - - if (apm_disabled) { - printk(KERN_NOTICE "apm: disabled on user request.\n"); - return -ENODEV; - } - - kapmd_tsk = kthread_create(kapmd, NULL, "kapmd"); - if (IS_ERR(kapmd_tsk)) { - ret = PTR_ERR(kapmd_tsk); - kapmd_tsk = NULL; - return ret; - } - kapmd_tsk->flags |= PF_NOFREEZE; - wake_up_process(kapmd_tsk); - -#ifdef CONFIG_PROC_FS - create_proc_info_entry("apm", 0, NULL, apm_get_info); -#endif - - ret = misc_register(&apm_device); - if (ret != 0) { - remove_proc_entry("apm", NULL); - kthread_stop(kapmd_tsk); - } - - return ret; -} - -static void __exit apm_exit(void) -{ - misc_deregister(&apm_device); - remove_proc_entry("apm", NULL); - - kthread_stop(kapmd_tsk); -} - -module_init(apm_init); -module_exit(apm_exit); - -MODULE_AUTHOR("Stephen Rothwell"); -MODULE_DESCRIPTION("Advanced Power Management"); -MODULE_LICENSE("GPL"); - -#ifndef MODULE -static int __init apm_setup(char *str) -{ - while ((str != NULL) && (*str != '\0')) { - if (strncmp(str, "off", 3) == 0) - apm_disabled = 1; - if (strncmp(str, "on", 2) == 0) - apm_disabled = 0; - str = strchr(str, ','); - if (str != NULL) - str += strspn(str, ", \t"); - } - return 1; -} - -__setup("apm=", apm_setup); -#endif - -/** - * apm_queue_event - queue an APM event for kapmd - * @event: APM event - * - * Queue an APM event for kapmd to process and ultimately take the - * appropriate action. Only a subset of events are handled: - * %APM_LOW_BATTERY - * %APM_POWER_STATUS_CHANGE - * %APM_USER_SUSPEND - * %APM_SYS_SUSPEND - * %APM_CRITICAL_SUSPEND - */ -void apm_queue_event(apm_event_t event) -{ - unsigned long flags; - - spin_lock_irqsave(&kapmd_queue_lock, flags); - queue_add_event(&kapmd_queue, event); - spin_unlock_irqrestore(&kapmd_queue_lock, flags); - - wake_up_interruptible(&kapmd_wait); -} -EXPORT_SYMBOL(apm_queue_event); diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c index 4c3de4008a43..165017de8d0d 100644 --- a/arch/arm/mach-pxa/corgi_pm.c +++ b/arch/arm/mach-pxa/corgi_pm.c @@ -16,7 +16,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c index db6e8f56a75f..b1d8cfca245a 100644 --- a/arch/arm/mach-pxa/sharpsl_pm.c +++ b/arch/arm/mach-pxa/sharpsl_pm.c @@ -23,7 +23,7 @@ #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c index 40be833079c7..b97d543d9364 100644 --- a/arch/arm/mach-pxa/spitz_pm.c +++ b/arch/arm/mach-pxa/spitz_pm.c @@ -16,7 +16,7 @@ #include #include #include -#include +#include #include #include #include -- cgit v1.2.3 From 2116245ee121af820225834e9695005ab07d1e84 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 9 Feb 2007 17:08:58 +0000 Subject: [APM] MIPS: Convert to use shared APM emulation. Also convert to use generic kernel/power/Kconfig to make the use of the shared APM emulation possible. Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 38 +-- arch/mips/kernel/Makefile | 2 - arch/mips/kernel/apm.c | 604 ---------------------------------------------- 3 files changed, 9 insertions(+), 635 deletions(-) delete mode 100644 arch/mips/kernel/apm.c (limited to 'arch') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 44a0224c32dd..9d839a9c4b1a 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -934,6 +934,9 @@ config CPU_LITTLE_ENDIAN endchoice +config SYS_SUPPORTS_APM_EMULATION + bool + config SYS_SUPPORTS_BIG_ENDIAN bool @@ -1001,6 +1004,7 @@ config SOC_AU1X00 bool select SYS_HAS_CPU_MIPS32_R1 select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_APM_EMULATION config PNX8550 bool @@ -2071,35 +2075,11 @@ config BINFMT_ELF32 bool default y if MIPS32_O32 || MIPS32_N32 -config PM - bool "Power Management support (EXPERIMENTAL)" - depends on EXPERIMENTAL && SOC_AU1X00 - -config APM - tristate "Advanced Power Management Emulation" - depends on PM - ---help--- - APM is a BIOS specification for saving power using several different - techniques. This is mostly useful for battery powered systems with - APM compliant BIOSes. If you say Y here, the system time will be - reset after a RESUME operation, the /proc/apm device will provide - battery status information, and user-space programs will receive - notification of APM "events" (e.g. battery status change). - - In order to use APM, you will need supporting software. For location - and more information, read and the - Battery Powered Linux mini-HOWTO, available from - . - - This driver does not spin down disk drives (see the hdparm(8) - manpage ("man 8 hdparm") for that), and it doesn't turn off - VESA-compliant "green" monitors. - - Generally, if you don't have a battery in your machine, there isn't - much point in using this driver and you should say N. If you get - random kernel OOPSes or reboots that don't seem to be related to - anything, try disabling/enabling this option (or disabling/enabling - APM in your BIOS). +endmenu + +menu "Power management options" + +source "kernel/power/Kconfig" endmenu diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index bbbb8d7cb89b..1bf2c8448912 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -14,8 +14,6 @@ binfmt_irix-objs := irixelf.o irixinv.o irixioctl.o irixsig.o \ obj-$(CONFIG_STACKTRACE) += stacktrace.o obj-$(CONFIG_MODULES) += mips_ksyms.o module.o -obj-$(CONFIG_APM) += apm.o - obj-$(CONFIG_CPU_R3000) += r2300_fpu.o r2300_switch.o obj-$(CONFIG_CPU_TX39XX) += r2300_fpu.o r2300_switch.o obj-$(CONFIG_CPU_TX49XX) += r4k_fpu.o r4k_switch.o diff --git a/arch/mips/kernel/apm.c b/arch/mips/kernel/apm.c deleted file mode 100644 index ba16d07588cb..000000000000 --- a/arch/mips/kernel/apm.c +++ /dev/null @@ -1,604 +0,0 @@ -/* - * bios-less APM driver for MIPS Linux - * Jamey Hicks - * adapted from the APM BIOS driver for Linux by Stephen Rothwell (sfr@linuxcare.com) - * - * APM 1.2 Reference: - * Intel Corporation, Microsoft Corporation. Advanced Power Management - * (APM) BIOS Interface Specification, Revision 1.2, February 1996. - * - * [This document is available from Microsoft at: - * http://www.microsoft.com/hwdev/busbios/amp_12.htm] - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include /* apm_power_info */ -#include - -/* - * The apm_bios device is one of the misc char devices. - * This is its minor number. - */ -#define APM_MINOR_DEV 134 - -/* - * See Documentation/Config.help for the configuration options. - * - * Various options can be changed at boot time as follows: - * (We allow underscores for compatibility with the modules code) - * apm=on/off enable/disable APM - */ - -/* - * Maximum number of events stored - */ -#define APM_MAX_EVENTS 16 - -struct apm_queue { - unsigned int event_head; - unsigned int event_tail; - apm_event_t events[APM_MAX_EVENTS]; -}; - -/* - * The per-file APM data - */ -struct apm_user { - struct list_head list; - - unsigned int suser: 1; - unsigned int writer: 1; - unsigned int reader: 1; - - int suspend_result; - unsigned int suspend_state; -#define SUSPEND_NONE 0 /* no suspend pending */ -#define SUSPEND_PENDING 1 /* suspend pending read */ -#define SUSPEND_READ 2 /* suspend read, pending ack */ -#define SUSPEND_ACKED 3 /* suspend acked */ -#define SUSPEND_DONE 4 /* suspend completed */ - - struct apm_queue queue; -}; - -/* - * Local variables - */ -static int suspends_pending; -static int apm_disabled; -static int mips_apm_active; - -static DECLARE_WAIT_QUEUE_HEAD(apm_waitqueue); -static DECLARE_WAIT_QUEUE_HEAD(apm_suspend_waitqueue); - -/* - * This is a list of everyone who has opened /dev/apm_bios - */ -static DECLARE_RWSEM(user_list_lock); -static LIST_HEAD(apm_user_list); - -/* - * kapmd info. kapmd provides us a process context to handle - * "APM" events within - specifically necessary if we're going - * to be suspending the system. - */ -static DECLARE_WAIT_QUEUE_HEAD(kapmd_wait); -static DECLARE_COMPLETION(kapmd_exit); -static DEFINE_SPINLOCK(kapmd_queue_lock); -static struct apm_queue kapmd_queue; - - -static const char driver_version[] = "1.13"; /* no spaces */ - - - -/* - * Compatibility cruft until the IPAQ people move over to the new - * interface. - */ -static void __apm_get_power_status(struct apm_power_info *info) -{ -} - -/* - * This allows machines to provide their own "apm get power status" function. - */ -void (*apm_get_power_status)(struct apm_power_info *) = __apm_get_power_status; -EXPORT_SYMBOL(apm_get_power_status); - - -/* - * APM event queue management. - */ -static inline int queue_empty(struct apm_queue *q) -{ - return q->event_head == q->event_tail; -} - -static inline apm_event_t queue_get_event(struct apm_queue *q) -{ - q->event_tail = (q->event_tail + 1) % APM_MAX_EVENTS; - return q->events[q->event_tail]; -} - -static void queue_add_event(struct apm_queue *q, apm_event_t event) -{ - q->event_head = (q->event_head + 1) % APM_MAX_EVENTS; - if (q->event_head == q->event_tail) { - static int notified; - - if (notified++ == 0) - printk(KERN_ERR "apm: an event queue overflowed\n"); - q->event_tail = (q->event_tail + 1) % APM_MAX_EVENTS; - } - q->events[q->event_head] = event; -} - -static void queue_event_one_user(struct apm_user *as, apm_event_t event) -{ - if (as->suser && as->writer) { - switch (event) { - case APM_SYS_SUSPEND: - case APM_USER_SUSPEND: - /* - * If this user already has a suspend pending, - * don't queue another one. - */ - if (as->suspend_state != SUSPEND_NONE) - return; - - as->suspend_state = SUSPEND_PENDING; - suspends_pending++; - break; - } - } - queue_add_event(&as->queue, event); -} - -static void queue_event(apm_event_t event, struct apm_user *sender) -{ - struct apm_user *as; - - down_read(&user_list_lock); - list_for_each_entry(as, &apm_user_list, list) { - if (as != sender && as->reader) - queue_event_one_user(as, event); - } - up_read(&user_list_lock); - wake_up_interruptible(&apm_waitqueue); -} - -static void apm_suspend(void) -{ - struct apm_user *as; - int err = pm_suspend(PM_SUSPEND_MEM); - - /* - * Anyone on the APM queues will think we're still suspended. - * Send a message so everyone knows we're now awake again. - */ - queue_event(APM_NORMAL_RESUME, NULL); - - /* - * Finally, wake up anyone who is sleeping on the suspend. - */ - down_read(&user_list_lock); - list_for_each_entry(as, &apm_user_list, list) { - as->suspend_result = err; - as->suspend_state = SUSPEND_DONE; - } - up_read(&user_list_lock); - - wake_up(&apm_suspend_waitqueue); -} - -static ssize_t apm_read(struct file *fp, char __user *buf, size_t count, loff_t *ppos) -{ - struct apm_user *as = fp->private_data; - apm_event_t event; - int i = count, ret = 0; - - if (count < sizeof(apm_event_t)) - return -EINVAL; - - if (queue_empty(&as->queue) && fp->f_flags & O_NONBLOCK) - return -EAGAIN; - - wait_event_interruptible(apm_waitqueue, !queue_empty(&as->queue)); - - while ((i >= sizeof(event)) && !queue_empty(&as->queue)) { - event = queue_get_event(&as->queue); - - ret = -EFAULT; - if (copy_to_user(buf, &event, sizeof(event))) - break; - - if (event == APM_SYS_SUSPEND || event == APM_USER_SUSPEND) - as->suspend_state = SUSPEND_READ; - - buf += sizeof(event); - i -= sizeof(event); - } - - if (i < count) - ret = count - i; - - return ret; -} - -static unsigned int apm_poll(struct file *fp, poll_table * wait) -{ - struct apm_user *as = fp->private_data; - - poll_wait(fp, &apm_waitqueue, wait); - return queue_empty(&as->queue) ? 0 : POLLIN | POLLRDNORM; -} - -/* - * apm_ioctl - handle APM ioctl - * - * APM_IOC_SUSPEND - * This IOCTL is overloaded, and performs two functions. It is used to: - * - initiate a suspend - * - acknowledge a suspend read from /dev/apm_bios. - * Only when everyone who has opened /dev/apm_bios with write permission - * has acknowledge does the actual suspend happen. - */ -static int -apm_ioctl(struct inode * inode, struct file *filp, unsigned int cmd, unsigned long arg) -{ - struct apm_user *as = filp->private_data; - unsigned long flags; - int err = -EINVAL; - - if (!as->suser || !as->writer) - return -EPERM; - - switch (cmd) { - case APM_IOC_SUSPEND: - as->suspend_result = -EINTR; - - if (as->suspend_state == SUSPEND_READ) { - /* - * If we read a suspend command from /dev/apm_bios, - * then the corresponding APM_IOC_SUSPEND ioctl is - * interpreted as an acknowledge. - */ - as->suspend_state = SUSPEND_ACKED; - suspends_pending--; - } else { - /* - * Otherwise it is a request to suspend the system. - * Queue an event for all readers, and expect an - * acknowledge from all writers who haven't already - * acknowledged. - */ - queue_event(APM_USER_SUSPEND, as); - } - - /* - * If there are no further acknowledges required, suspend - * the system. - */ - if (suspends_pending == 0) - apm_suspend(); - - /* - * Wait for the suspend/resume to complete. If there are - * pending acknowledges, we wait here for them. - * - * Note that we need to ensure that the PM subsystem does - * not kick us out of the wait when it suspends the threads. - */ - flags = current->flags; - current->flags |= PF_NOFREEZE; - - /* - * Note: do not allow a thread which is acking the suspend - * to escape until the resume is complete. - */ - if (as->suspend_state == SUSPEND_ACKED) - wait_event(apm_suspend_waitqueue, - as->suspend_state == SUSPEND_DONE); - else - wait_event_interruptible(apm_suspend_waitqueue, - as->suspend_state == SUSPEND_DONE); - - current->flags = flags; - err = as->suspend_result; - as->suspend_state = SUSPEND_NONE; - break; - } - - return err; -} - -static int apm_release(struct inode * inode, struct file * filp) -{ - struct apm_user *as = filp->private_data; - filp->private_data = NULL; - - down_write(&user_list_lock); - list_del(&as->list); - up_write(&user_list_lock); - - /* - * We are now unhooked from the chain. As far as new - * events are concerned, we no longer exist. However, we - * need to balance suspends_pending, which means the - * possibility of sleeping. - */ - if (as->suspend_state != SUSPEND_NONE) { - suspends_pending -= 1; - if (suspends_pending == 0) - apm_suspend(); - } - - kfree(as); - return 0; -} - -static int apm_open(struct inode * inode, struct file * filp) -{ - struct apm_user *as; - - as = kzalloc(sizeof(*as), GFP_KERNEL); - if (as) { - /* - * XXX - this is a tiny bit broken, when we consider BSD - * process accounting. If the device is opened by root, we - * instantly flag that we used superuser privs. Who knows, - * we might close the device immediately without doing a - * privileged operation -- cevans - */ - as->suser = capable(CAP_SYS_ADMIN); - as->writer = (filp->f_mode & FMODE_WRITE) == FMODE_WRITE; - as->reader = (filp->f_mode & FMODE_READ) == FMODE_READ; - - down_write(&user_list_lock); - list_add(&as->list, &apm_user_list); - up_write(&user_list_lock); - - filp->private_data = as; - } - - return as ? 0 : -ENOMEM; -} - -static struct file_operations apm_bios_fops = { - .owner = THIS_MODULE, - .read = apm_read, - .poll = apm_poll, - .ioctl = apm_ioctl, - .open = apm_open, - .release = apm_release, -}; - -static struct miscdevice apm_device = { - .minor = APM_MINOR_DEV, - .name = "apm_bios", - .fops = &apm_bios_fops -}; - - -#ifdef CONFIG_PROC_FS -/* - * Arguments, with symbols from linux/apm_bios.h. - * - * 0) Linux driver version (this will change if format changes) - * 1) APM BIOS Version. Usually 1.0, 1.1 or 1.2. - * 2) APM flags from APM Installation Check (0x00): - * bit 0: APM_16_BIT_SUPPORT - * bit 1: APM_32_BIT_SUPPORT - * bit 2: APM_IDLE_SLOWS_CLOCK - * bit 3: APM_BIOS_DISABLED - * bit 4: APM_BIOS_DISENGAGED - * 3) AC line status - * 0x00: Off-line - * 0x01: On-line - * 0x02: On backup power (BIOS >= 1.1 only) - * 0xff: Unknown - * 4) Battery status - * 0x00: High - * 0x01: Low - * 0x02: Critical - * 0x03: Charging - * 0x04: Selected battery not present (BIOS >= 1.2 only) - * 0xff: Unknown - * 5) Battery flag - * bit 0: High - * bit 1: Low - * bit 2: Critical - * bit 3: Charging - * bit 7: No system battery - * 0xff: Unknown - * 6) Remaining battery life (percentage of charge): - * 0-100: valid - * -1: Unknown - * 7) Remaining battery life (time units): - * Number of remaining minutes or seconds - * -1: Unknown - * 8) min = minutes; sec = seconds - */ -static int apm_get_info(char *buf, char **start, off_t fpos, int length) -{ - struct apm_power_info info; - char *units; - int ret; - - info.ac_line_status = 0xff; - info.battery_status = 0xff; - info.battery_flag = 0xff; - info.battery_life = -1; - info.time = -1; - info.units = -1; - - if (apm_get_power_status) - apm_get_power_status(&info); - - switch (info.units) { - default: units = "?"; break; - case 0: units = "min"; break; - case 1: units = "sec"; break; - } - - ret = sprintf(buf, "%s 1.2 0x%02x 0x%02x 0x%02x 0x%02x %d%% %d %s\n", - driver_version, APM_32_BIT_SUPPORT, - info.ac_line_status, info.battery_status, - info.battery_flag, info.battery_life, - info.time, units); - - return ret; -} -#endif - -static int kapmd(void *arg) -{ - daemonize("kapmd"); - current->flags |= PF_NOFREEZE; - - do { - apm_event_t event; - - wait_event_interruptible(kapmd_wait, - !queue_empty(&kapmd_queue) || !mips_apm_active); - - if (!mips_apm_active) - break; - - spin_lock_irq(&kapmd_queue_lock); - event = 0; - if (!queue_empty(&kapmd_queue)) - event = queue_get_event(&kapmd_queue); - spin_unlock_irq(&kapmd_queue_lock); - - switch (event) { - case 0: - break; - - case APM_LOW_BATTERY: - case APM_POWER_STATUS_CHANGE: - queue_event(event, NULL); - break; - - case APM_USER_SUSPEND: - case APM_SYS_SUSPEND: - queue_event(event, NULL); - if (suspends_pending == 0) - apm_suspend(); - break; - - case APM_CRITICAL_SUSPEND: - apm_suspend(); - break; - } - } while (1); - - complete_and_exit(&kapmd_exit, 0); -} - -static int __init apm_init(void) -{ - int ret; - - if (apm_disabled) { - printk(KERN_NOTICE "apm: disabled on user request.\n"); - return -ENODEV; - } - - mips_apm_active = 1; - - ret = kernel_thread(kapmd, NULL, CLONE_KERNEL); - if (ret < 0) { - mips_apm_active = 0; - return ret; - } - -#ifdef CONFIG_PROC_FS - create_proc_info_entry("apm", 0, NULL, apm_get_info); -#endif - - ret = misc_register(&apm_device); - if (ret != 0) { - remove_proc_entry("apm", NULL); - - mips_apm_active = 0; - wake_up(&kapmd_wait); - wait_for_completion(&kapmd_exit); - } - - return ret; -} - -static void __exit apm_exit(void) -{ - misc_deregister(&apm_device); - remove_proc_entry("apm", NULL); - - mips_apm_active = 0; - wake_up(&kapmd_wait); - wait_for_completion(&kapmd_exit); -} - -module_init(apm_init); -module_exit(apm_exit); - -MODULE_AUTHOR("Stephen Rothwell"); -MODULE_DESCRIPTION("Advanced Power Management"); -MODULE_LICENSE("GPL"); - -#ifndef MODULE -static int __init apm_setup(char *str) -{ - while ((str != NULL) && (*str != '\0')) { - if (strncmp(str, "off", 3) == 0) - apm_disabled = 1; - if (strncmp(str, "on", 2) == 0) - apm_disabled = 0; - str = strchr(str, ','); - if (str != NULL) - str += strspn(str, ", \t"); - } - return 1; -} - -__setup("apm=", apm_setup); -#endif - -/** - * apm_queue_event - queue an APM event for kapmd - * @event: APM event - * - * Queue an APM event for kapmd to process and ultimately take the - * appropriate action. Only a subset of events are handled: - * %APM_LOW_BATTERY - * %APM_POWER_STATUS_CHANGE - * %APM_USER_SUSPEND - * %APM_SYS_SUSPEND - * %APM_CRITICAL_SUSPEND - */ -void apm_queue_event(apm_event_t event) -{ - unsigned long flags; - - spin_lock_irqsave(&kapmd_queue_lock, flags); - queue_add_event(&kapmd_queue, event); - spin_unlock_irqrestore(&kapmd_queue_lock, flags); - - wake_up_interruptible(&kapmd_wait); -} -EXPORT_SYMBOL(apm_queue_event); -- cgit v1.2.3 From 0a9b0db19262dbb09f3a34195e68cafd5dc3fa10 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 24 Jan 2007 21:56:20 +0900 Subject: [APM] SH: Convert to use shared APM emulation. Signed-off-by: Paul Mundt Signed-off-by: Ralf Baechle --- arch/sh/Kconfig | 7 +- arch/sh/boards/hp6xx/hp6xx_apm.c | 68 ++--- arch/sh/kernel/Makefile | 1 - arch/sh/kernel/apm.c | 538 --------------------------------------- 4 files changed, 28 insertions(+), 586 deletions(-) delete mode 100644 arch/sh/kernel/apm.c (limited to 'arch') diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 3aa3b885ab36..4f3891215b87 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -48,6 +48,9 @@ config GENERIC_IOMAP config GENERIC_TIME def_bool n +config SYS_SUPPORTS_APM_EMULATION + bool + config ARCH_MAY_HAVE_PC_FDC bool @@ -126,6 +129,7 @@ config SH_7751_SYSTEMH config SH_HP6XX bool "HP6XX" + select SYS_SUPPORTS_APM_EMULATION help Select HP6XX if configuring for a HP jornada HP6xx. More information (hardware only) at @@ -694,9 +698,6 @@ depends on EXPERIMENTAL source kernel/power/Kconfig -config APM - bool "Advanced Power Management Emulation" - depends on PM endmenu source "net/Kconfig" diff --git a/arch/sh/boards/hp6xx/hp6xx_apm.c b/arch/sh/boards/hp6xx/hp6xx_apm.c index d146cdaa0b8b..d1c1460c8a06 100644 --- a/arch/sh/boards/hp6xx/hp6xx_apm.c +++ b/arch/sh/boards/hp6xx/hp6xx_apm.c @@ -7,12 +7,11 @@ * modify it under the terms of the GNU General Public License. */ #include -#include #include #include #include -#include -#include +#include +#include #include #include @@ -27,60 +26,41 @@ #define MODNAME "hp6x0_apm" -static int hp6x0_apm_get_info(char *buf, char **start, off_t fpos, int length) +static void hp6x0_apm_get_power_status(struct apm_power_info *info) { + int battery, backup, charging, percentage; u8 pgdr; - char *p; - int battery_status; - int battery_flag; - int ac_line_status; - int time_units = APM_BATTERY_LIFE_UNKNOWN; - int battery = adc_single(ADC_CHANNEL_BATTERY); - int backup = adc_single(ADC_CHANNEL_BACKUP); - int charging = adc_single(ADC_CHANNEL_CHARGE); - int percentage; + battery = adc_single(ADC_CHANNEL_BATTERY); + backup = adc_single(ADC_CHANNEL_BACKUP); + charging = adc_single(ADC_CHANNEL_CHARGE); percentage = 100 * (battery - HP680_BATTERY_MIN) / (HP680_BATTERY_MAX - HP680_BATTERY_MIN); - ac_line_status = (battery > HP680_BATTERY_AC_ON) ? + info->ac_line_status = (battery > HP680_BATTERY_AC_ON) ? APM_AC_ONLINE : APM_AC_OFFLINE; - p = buf; - pgdr = ctrl_inb(SH7709_PGDR); if (pgdr & PGDR_MAIN_BATTERY_OUT) { - battery_status = APM_BATTERY_STATUS_NOT_PRESENT; - battery_flag = 0x80; - percentage = -1; - } else if (charging < 8 ) { - battery_status = APM_BATTERY_STATUS_CHARGING; - battery_flag = 0x08; - ac_line_status = 0xff; + info->battery_status = APM_BATTERY_STATUS_NOT_PRESENT; + info->battery_flag = 0x80; + } else if (charging < 8) { + info->battery_status = APM_BATTERY_STATUS_CHARGING; + info->battery_flag = 0x08; + info->ac_line_status = 0xff; } else if (percentage <= APM_CRITICAL) { - battery_status = APM_BATTERY_STATUS_CRITICAL; - battery_flag = 0x04; + info->battery_status = APM_BATTERY_STATUS_CRITICAL; + info->battery_flag = 0x04; } else if (percentage <= APM_LOW) { - battery_status = APM_BATTERY_STATUS_LOW; - battery_flag = 0x02; + info->battery_status = APM_BATTERY_STATUS_LOW; + info->battery_flag = 0x02; } else { - battery_status = APM_BATTERY_STATUS_HIGH; - battery_flag = 0x01; + info->battery_status = APM_BATTERY_STATUS_HIGH; + info->battery_flag = 0x01; } - p += sprintf(p, "1.0 1.2 0x%02x 0x%02x 0x%02x 0x%02x %d%% %d %s\n", - APM_32_BIT_SUPPORT, - ac_line_status, - battery_status, - battery_flag, - percentage, - time_units, - "min"); - p += sprintf(p, "bat=%d backup=%d charge=%d\n", - battery, backup, charging); - - return p - buf; + info->units = 0; } static irqreturn_t hp6x0_apm_interrupt(int irq, void *dev) @@ -96,14 +76,14 @@ static int __init hp6x0_apm_init(void) int ret; ret = request_irq(HP680_BTN_IRQ, hp6x0_apm_interrupt, - IRQF_DISABLED, MODNAME, 0); + IRQF_DISABLED, MODNAME, NULL); if (unlikely(ret < 0)) { printk(KERN_ERR MODNAME ": IRQ %d request failed\n", HP680_BTN_IRQ); return ret; } - apm_get_info = hp6x0_apm_get_info; + apm_get_power_status = hp6x0_apm_get_power_status; return ret; } @@ -111,7 +91,7 @@ static int __init hp6x0_apm_init(void) static void __exit hp6x0_apm_exit(void) { free_irq(HP680_BTN_IRQ, 0); - apm_get_info = 0; + apm_get_info = NULL; } module_init(hp6x0_apm_init); diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile index 99c7e5249f7a..2f6d2bcb1c93 100644 --- a/arch/sh/kernel/Makefile +++ b/arch/sh/kernel/Makefile @@ -19,6 +19,5 @@ obj-$(CONFIG_SH_CPU_FREQ) += cpufreq.o obj-$(CONFIG_MODULES) += module.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o -obj-$(CONFIG_APM) += apm.o obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_STACKTRACE) += stacktrace.o diff --git a/arch/sh/kernel/apm.c b/arch/sh/kernel/apm.c deleted file mode 100644 index 4f66f91b1006..000000000000 --- a/arch/sh/kernel/apm.c +++ /dev/null @@ -1,538 +0,0 @@ -/* - * bios-less APM driver for hp680 - * - * Copyright 2005 (c) Andriy Skulysh - * - * based on ARM APM driver by - * Jamey Hicks - * - * adapted from the APM BIOS driver for Linux by - * Stephen Rothwell (sfr@linuxcare.com) - * - * APM 1.2 Reference: - * Intel Corporation, Microsoft Corporation. Advanced Power Management - * (APM) BIOS Interface Specification, Revision 1.2, February 1996. - * - * [This document is available from Microsoft at: - * http://www.microsoft.com/hwdev/busbios/amp_12.htm] - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define MODNAME "apm" - -/* - * The apm_bios device is one of the misc char devices. - * This is its minor number. - */ -#define APM_MINOR_DEV 134 - -/* - * Maximum number of events stored - */ -#define APM_MAX_EVENTS 16 - -struct apm_queue { - unsigned int event_head; - unsigned int event_tail; - apm_event_t events[APM_MAX_EVENTS]; -}; - -/* - * The per-file APM data - */ -struct apm_user { - struct list_head list; - - unsigned int suser: 1; - unsigned int writer: 1; - unsigned int reader: 1; - - int suspend_result; - unsigned int suspend_state; -#define SUSPEND_NONE 0 /* no suspend pending */ -#define SUSPEND_PENDING 1 /* suspend pending read */ -#define SUSPEND_READ 2 /* suspend read, pending ack */ -#define SUSPEND_ACKED 3 /* suspend acked */ -#define SUSPEND_DONE 4 /* suspend completed */ - - struct apm_queue queue; -}; - -/* - * Local variables - */ -static int suspends_pending; - -static DECLARE_WAIT_QUEUE_HEAD(apm_waitqueue); -static DECLARE_WAIT_QUEUE_HEAD(apm_suspend_waitqueue); - -/* - * This is a list of everyone who has opened /dev/apm_bios - */ -static DECLARE_RWSEM(user_list_lock); -static LIST_HEAD(apm_user_list); - -/* - * kapmd info. kapmd provides us a process context to handle - * "APM" events within - specifically necessary if we're going - * to be suspending the system. - */ -static DECLARE_WAIT_QUEUE_HEAD(kapmd_wait); -static DECLARE_COMPLETION(kapmd_exit); -static DEFINE_SPINLOCK(kapmd_queue_lock); -static struct apm_queue kapmd_queue; - -int apm_suspended; -EXPORT_SYMBOL(apm_suspended); - -/* Platform-specific apm_read_proc(). */ -int (*apm_get_info)(char *buf, char **start, off_t fpos, int length); -EXPORT_SYMBOL(apm_get_info); - -/* - * APM event queue management. - */ -static inline int queue_empty(struct apm_queue *q) -{ - return q->event_head == q->event_tail; -} - -static inline apm_event_t queue_get_event(struct apm_queue *q) -{ - q->event_tail = (q->event_tail + 1) % APM_MAX_EVENTS; - return q->events[q->event_tail]; -} - -static void queue_add_event(struct apm_queue *q, apm_event_t event) -{ - q->event_head = (q->event_head + 1) % APM_MAX_EVENTS; - if (q->event_head == q->event_tail) { - static int notified; - - if (notified++ == 0) - printk(KERN_ERR "apm: an event queue overflowed\n"); - - q->event_tail = (q->event_tail + 1) % APM_MAX_EVENTS; - } - q->events[q->event_head] = event; -} - -static void queue_event_one_user(struct apm_user *as, apm_event_t event) -{ - if (as->suser && as->writer) { - switch (event) { - case APM_SYS_SUSPEND: - case APM_USER_SUSPEND: - /* - * If this user already has a suspend pending, - * don't queue another one. - */ - if (as->suspend_state != SUSPEND_NONE) - return; - - as->suspend_state = SUSPEND_PENDING; - suspends_pending++; - break; - } - } - queue_add_event(&as->queue, event); -} - -static void queue_event(apm_event_t event, struct apm_user *sender) -{ - struct apm_user *as; - - down_read(&user_list_lock); - - list_for_each_entry(as, &apm_user_list, list) - if (as != sender && as->reader) - queue_event_one_user(as, event); - - up_read(&user_list_lock); - wake_up_interruptible(&apm_waitqueue); -} - -/** - * apm_queue_event - queue an APM event for kapmd - * @event: APM event - * - * Queue an APM event for kapmd to process and ultimately take the - * appropriate action. Only a subset of events are handled: - * %APM_LOW_BATTERY - * %APM_POWER_STATUS_CHANGE - * %APM_USER_SUSPEND - * %APM_SYS_SUSPEND - * %APM_CRITICAL_SUSPEND - */ -void apm_queue_event(apm_event_t event) -{ - spin_lock_irq(&kapmd_queue_lock); - queue_add_event(&kapmd_queue, event); - spin_unlock_irq(&kapmd_queue_lock); - - wake_up_interruptible(&kapmd_wait); -} -EXPORT_SYMBOL(apm_queue_event); - -static void apm_suspend(void) -{ - struct apm_user *as; - int err; - - apm_suspended = 1; - err = pm_suspend(PM_SUSPEND_MEM); - - /* - * Anyone on the APM queues will think we're still suspended. - * Send a message so everyone knows we're now awake again. - */ - queue_event(APM_NORMAL_RESUME, NULL); - - /* - * Finally, wake up anyone who is sleeping on the suspend. - */ - down_read(&user_list_lock); - list_for_each_entry(as, &apm_user_list, list) { - as->suspend_result = err; - as->suspend_state = SUSPEND_DONE; - } - up_read(&user_list_lock); - - wake_up(&apm_suspend_waitqueue); - apm_suspended = 0; -} - -static ssize_t apm_read(struct file *fp, char __user *buf, - size_t count, loff_t *ppos) -{ - struct apm_user *as = fp->private_data; - apm_event_t event; - int i = count, ret = 0; - - if (count < sizeof(apm_event_t)) - return -EINVAL; - - if (queue_empty(&as->queue) && fp->f_flags & O_NONBLOCK) - return -EAGAIN; - - wait_event_interruptible(apm_waitqueue, !queue_empty(&as->queue)); - - while ((i >= sizeof(event)) && !queue_empty(&as->queue)) { - event = queue_get_event(&as->queue); - - ret = -EFAULT; - if (copy_to_user(buf, &event, sizeof(event))) - break; - - if (event == APM_SYS_SUSPEND || event == APM_USER_SUSPEND) - as->suspend_state = SUSPEND_READ; - - buf += sizeof(event); - i -= sizeof(event); - } - - if (i < count) - ret = count - i; - - return ret; -} - -static unsigned int apm_poll(struct file *fp, poll_table * wait) -{ - struct apm_user *as = fp->private_data; - - poll_wait(fp, &apm_waitqueue, wait); - return queue_empty(&as->queue) ? 0 : POLLIN | POLLRDNORM; -} - -/* - * apm_ioctl - handle APM ioctl - * - * APM_IOC_SUSPEND - * This IOCTL is overloaded, and performs two functions. It is used to: - * - initiate a suspend - * - acknowledge a suspend read from /dev/apm_bios. - * Only when everyone who has opened /dev/apm_bios with write permission - * has acknowledge does the actual suspend happen. - */ -static int -apm_ioctl(struct inode * inode, struct file *filp, u_int cmd, u_long arg) -{ - struct apm_user *as = filp->private_data; - unsigned long flags; - int err = -EINVAL; - - if (!as->suser || !as->writer) - return -EPERM; - - switch (cmd) { - case APM_IOC_SUSPEND: - as->suspend_result = -EINTR; - - if (as->suspend_state == SUSPEND_READ) { - /* - * If we read a suspend command from /dev/apm_bios, - * then the corresponding APM_IOC_SUSPEND ioctl is - * interpreted as an acknowledge. - */ - as->suspend_state = SUSPEND_ACKED; - suspends_pending--; - } else { - /* - * Otherwise it is a request to suspend the system. - * Queue an event for all readers, and expect an - * acknowledge from all writers who haven't already - * acknowledged. - */ - queue_event(APM_USER_SUSPEND, as); - } - - /* - * If there are no further acknowledges required, suspend - * the system. - */ - if (suspends_pending == 0) - apm_suspend(); - - /* - * Wait for the suspend/resume to complete. If there are - * pending acknowledges, we wait here for them. - * - * Note that we need to ensure that the PM subsystem does - * not kick us out of the wait when it suspends the threads. - */ - flags = current->flags; - current->flags |= PF_NOFREEZE; - - /* - * Note: do not allow a thread which is acking the suspend - * to escape until the resume is complete. - */ - if (as->suspend_state == SUSPEND_ACKED) - wait_event(apm_suspend_waitqueue, - as->suspend_state == SUSPEND_DONE); - else - wait_event_interruptible(apm_suspend_waitqueue, - as->suspend_state == SUSPEND_DONE); - - current->flags = flags; - err = as->suspend_result; - as->suspend_state = SUSPEND_NONE; - break; - } - - return err; -} - -static int apm_release(struct inode * inode, struct file * filp) -{ - struct apm_user *as = filp->private_data; - filp->private_data = NULL; - - down_write(&user_list_lock); - list_del(&as->list); - up_write(&user_list_lock); - - /* - * We are now unhooked from the chain. As far as new - * events are concerned, we no longer exist. However, we - * need to balance suspends_pending, which means the - * possibility of sleeping. - */ - if (as->suspend_state != SUSPEND_NONE) { - suspends_pending -= 1; - if (suspends_pending == 0) - apm_suspend(); - } - - kfree(as); - return 0; -} - -static int apm_open(struct inode * inode, struct file * filp) -{ - struct apm_user *as; - - as = kzalloc(sizeof(*as), GFP_KERNEL); - if (as) { - /* - * XXX - this is a tiny bit broken, when we consider BSD - * process accounting. If the device is opened by root, we - * instantly flag that we used superuser privs. Who knows, - * we might close the device immediately without doing a - * privileged operation -- cevans - */ - as->suser = capable(CAP_SYS_ADMIN); - as->writer = (filp->f_mode & FMODE_WRITE) == FMODE_WRITE; - as->reader = (filp->f_mode & FMODE_READ) == FMODE_READ; - - down_write(&user_list_lock); - list_add(&as->list, &apm_user_list); - up_write(&user_list_lock); - - filp->private_data = as; - } - - return as ? 0 : -ENOMEM; -} - -static struct file_operations apm_bios_fops = { - .owner = THIS_MODULE, - .read = apm_read, - .poll = apm_poll, - .ioctl = apm_ioctl, - .open = apm_open, - .release = apm_release, -}; - -static struct miscdevice apm_device = { - .minor = APM_MINOR_DEV, - .name = "apm_bios", - .fops = &apm_bios_fops -}; - - -#ifdef CONFIG_PROC_FS -/* - * Arguments, with symbols from linux/apm_bios.h. - * - * 0) Linux driver version (this will change if format changes) - * 1) APM BIOS Version. Usually 1.0, 1.1 or 1.2. - * 2) APM flags from APM Installation Check (0x00): - * bit 0: APM_16_BIT_SUPPORT - * bit 1: APM_32_BIT_SUPPORT - * bit 2: APM_IDLE_SLOWS_CLOCK - * bit 3: APM_BIOS_DISABLED - * bit 4: APM_BIOS_DISENGAGED - * 3) AC line status - * 0x00: Off-line - * 0x01: On-line - * 0x02: On backup power (BIOS >= 1.1 only) - * 0xff: Unknown - * 4) Battery status - * 0x00: High - * 0x01: Low - * 0x02: Critical - * 0x03: Charging - * 0x04: Selected battery not present (BIOS >= 1.2 only) - * 0xff: Unknown - * 5) Battery flag - * bit 0: High - * bit 1: Low - * bit 2: Critical - * bit 3: Charging - * bit 7: No system battery - * 0xff: Unknown - * 6) Remaining battery life (percentage of charge): - * 0-100: valid - * -1: Unknown - * 7) Remaining battery life (time units): - * Number of remaining minutes or seconds - * -1: Unknown - * 8) min = minutes; sec = seconds - */ -static int apm_read_proc(char *buf, char **start, off_t fpos, int length) -{ - if (likely(apm_get_info)) - return apm_get_info(buf, start, fpos, length); - - return -EINVAL; -} -#endif - -static int kapmd(void *arg) -{ - daemonize("kapmd"); - current->flags |= PF_NOFREEZE; - - do { - apm_event_t event; - - wait_event_interruptible(kapmd_wait, - !queue_empty(&kapmd_queue) || !pm_active); - - if (!pm_active) - break; - - spin_lock_irq(&kapmd_queue_lock); - event = 0; - if (!queue_empty(&kapmd_queue)) - event = queue_get_event(&kapmd_queue); - spin_unlock_irq(&kapmd_queue_lock); - - switch (event) { - case 0: - break; - - case APM_LOW_BATTERY: - case APM_POWER_STATUS_CHANGE: - queue_event(event, NULL); - break; - - case APM_USER_SUSPEND: - case APM_SYS_SUSPEND: - queue_event(event, NULL); - if (suspends_pending == 0) - apm_suspend(); - break; - - case APM_CRITICAL_SUSPEND: - apm_suspend(); - break; - } - } while (1); - - complete_and_exit(&kapmd_exit, 0); -} - -static int __init apm_init(void) -{ - int ret; - - pm_active = 1; - - ret = kernel_thread(kapmd, NULL, CLONE_KERNEL); - if (unlikely(ret < 0)) { - pm_active = 0; - return ret; - } - - create_proc_info_entry("apm", 0, NULL, apm_read_proc); - - ret = misc_register(&apm_device); - if (unlikely(ret != 0)) { - remove_proc_entry("apm", NULL); - - pm_active = 0; - wake_up(&kapmd_wait); - wait_for_completion(&kapmd_exit); - } - - return ret; -} - -static void __exit apm_exit(void) -{ - misc_deregister(&apm_device); - remove_proc_entry("apm", NULL); - - pm_active = 0; - wake_up(&kapmd_wait); - wait_for_completion(&kapmd_exit); -} - -module_init(apm_init); -module_exit(apm_exit); - -MODULE_AUTHOR("Stephen Rothwell, Andriy Skulysh"); -MODULE_DESCRIPTION("Advanced Power Management"); -MODULE_LICENSE("GPL"); -- cgit v1.2.3 From ccbebdaccf53ef21663d3bde0ab7b3806d0aeb94 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 9 Feb 2007 16:38:10 +0000 Subject: [PATCH] arch/ia64: ansify Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/ia64/kernel/crash.c | 2 +- arch/ia64/kernel/smp.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/crash.c b/arch/ia64/kernel/crash.c index 9d92097ce96d..37bb16f07fc3 100644 --- a/arch/ia64/kernel/crash.c +++ b/arch/ia64/kernel/crash.c @@ -52,7 +52,7 @@ extern void ia64_dump_cpu_regs(void *); static DEFINE_PER_CPU(struct elf_prstatus, elf_prstatus); void -crash_save_this_cpu() +crash_save_this_cpu(void) { void *buf; unsigned long cfm, sof, sol; diff --git a/arch/ia64/kernel/smp.c b/arch/ia64/kernel/smp.c index f4c7f7769cf7..55ddd809b02d 100644 --- a/arch/ia64/kernel/smp.c +++ b/arch/ia64/kernel/smp.c @@ -221,13 +221,13 @@ send_IPI_self (int op) #ifdef CONFIG_KEXEC void -kdump_smp_send_stop() +kdump_smp_send_stop(void) { send_IPI_allbutself(IPI_KDUMP_CPU_STOP); } void -kdump_smp_send_init() +kdump_smp_send_init(void) { unsigned int cpu, self_cpu; self_cpu = smp_processor_id(); -- cgit v1.2.3 From 9340b0d356ee52783121af398fa6a332e19e37e2 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 9 Feb 2007 16:38:15 +0000 Subject: [PATCH] arch/powerpc trivial annotations Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/powerpc/platforms/cell/iommu.c | 5 +++-- arch/powerpc/platforms/chrp/setup.c | 4 ++-- arch/powerpc/xmon/spu-dis.c | 2 +- 3 files changed, 6 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c index b43466ba8096..67d617b60a23 100644 --- a/arch/powerpc/platforms/cell/iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -149,7 +149,8 @@ static int cbe_nr_iommus; static void invalidate_tce_cache(struct cbe_iommu *iommu, unsigned long *pte, long n_ptes) { - unsigned long *reg, val; + unsigned long __iomem *reg; + unsigned long val; long n; reg = iommu->xlate_regs + IOC_IOPT_CacheInvd; @@ -592,7 +593,7 @@ static void __init cell_iommu_init_one(struct device_node *np, unsigned long off /* Init base fields */ i = cbe_nr_iommus++; iommu = &iommus[i]; - iommu->stab = 0; + iommu->stab = NULL; iommu->nid = nid; snprintf(iommu->name, sizeof(iommu->name), "iommu%d", i); INIT_LIST_HEAD(&iommu->windows); diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c index e1f51d455984..117c9a0055bd 100644 --- a/arch/powerpc/platforms/chrp/setup.c +++ b/arch/powerpc/platforms/chrp/setup.c @@ -75,7 +75,7 @@ extern irqreturn_t xmon_irq(int, void *); extern unsigned long loops_per_jiffy; /* To be replaced by RTAS when available */ -static unsigned int *briq_SPOR; +static unsigned int __iomem *briq_SPOR; #ifdef CONFIG_SMP extern struct smp_ops_t chrp_smp_ops; @@ -267,7 +267,7 @@ void __init chrp_setup_arch(void) } else if (machine && strncmp(machine, "TotalImpact,BRIQ-1", 18) == 0) { _chrp_type = _CHRP_briq; /* Map the SPOR register on briq and change the restart hook */ - briq_SPOR = (unsigned int *)ioremap(0xff0000e8, 4); + briq_SPOR = ioremap(0xff0000e8, 4); ppc_md.restart = briq_restart; } else { /* Let's assume it is an IBM chrp if all else fails */ diff --git a/arch/powerpc/xmon/spu-dis.c b/arch/powerpc/xmon/spu-dis.c index ee929c641bf3..e5f89837c82e 100644 --- a/arch/powerpc/xmon/spu-dis.c +++ b/arch/powerpc/xmon/spu-dis.c @@ -85,7 +85,7 @@ get_index_for_opcode (unsigned int insn) if ((index = spu_disassemble_table[opcode & 0x7ff]) != 0) return index; - return 0; + return NULL; } /* Print a Spu instruction. */ -- cgit v1.2.3 From 5b71bddb78df5e292ae90f7603a996e51b3ecb88 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 9 Feb 2007 16:39:15 +0000 Subject: [PATCH] hpet: trivial __iomem annotations Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/i386/kernel/hpet.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/hpet.c b/arch/i386/kernel/hpet.c index 45a8685bb60b..0b29d41322a2 100644 --- a/arch/i386/kernel/hpet.c +++ b/arch/i386/kernel/hpet.c @@ -12,7 +12,7 @@ /* FSEC = 10^-15 NSEC = 10^-9 */ #define FSEC_PER_NSEC 1000000 -static void *hpet_ptr; +static void __iomem *hpet_ptr; static cycle_t read_hpet(void) { @@ -40,8 +40,7 @@ static int __init init_hpet_clocksource(void) return -ENODEV; /* calculate the hpet address: */ - hpet_base = - (void __iomem*)ioremap_nocache(hpet_address, HPET_MMAP_SIZE); + hpet_base = ioremap_nocache(hpet_address, HPET_MMAP_SIZE); hpet_ptr = hpet_base + HPET_COUNTER; /* calculate the frequency: */ -- cgit v1.2.3 From 11718b4d6ba03cf83e4cd856e5eda3a8d0d17652 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 9 Feb 2007 16:39:20 +0000 Subject: [PATCH] misc NULL noise removal Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/i386/mm/pageattr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/i386/mm/pageattr.c b/arch/i386/mm/pageattr.c index ad91528bdc14..e223b1d4981c 100644 --- a/arch/i386/mm/pageattr.c +++ b/arch/i386/mm/pageattr.c @@ -224,7 +224,7 @@ void global_flush_tlb(void) list_replace_init(&df_list, &l); spin_unlock_irq(&cpa_lock); if (!cpu_has_clflush) - flush_map(0); + flush_map(NULL); list_for_each_entry_safe(pg, next, &l, lru) { if (cpu_has_clflush) flush_map(page_address(pg)); -- cgit v1.2.3 From cb468984f624959995f1034197f3bae86108973b Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 9 Feb 2007 16:39:25 +0000 Subject: [PATCH] io_apic: trivial __iomem annotations Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/i386/kernel/io_apic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c index 5592fa6e1fa1..ba8d302a0b72 100644 --- a/arch/i386/kernel/io_apic.c +++ b/arch/i386/kernel/io_apic.c @@ -126,7 +126,7 @@ static inline void io_apic_write(unsigned int apic, unsigned int reg, unsigned i */ static inline void io_apic_modify(unsigned int apic, unsigned int reg, unsigned int value) { - volatile struct io_apic *io_apic = io_apic_base(apic); + volatile struct io_apic __iomem *io_apic = io_apic_base(apic); if (sis_apic_bug) writel(reg, &io_apic->index); writel(value, &io_apic->data); -- cgit v1.2.3 From f1fda89522c5aaa1bd4ef69605e85e6ee9c85faf Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 9 Feb 2007 16:39:50 +0000 Subject: [PATCH] powerpc: celleb trivial endianness and iomem annotations Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/powerpc/platforms/celleb/pci.c | 12 +++---- arch/powerpc/platforms/celleb/scc_epci.c | 56 ++++++++++++++++---------------- 2 files changed, 34 insertions(+), 34 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/celleb/pci.c b/arch/powerpc/platforms/celleb/pci.c index 867f83a7d0c9..98de836dfed3 100644 --- a/arch/powerpc/platforms/celleb/pci.c +++ b/arch/powerpc/platforms/celleb/pci.c @@ -65,13 +65,13 @@ static inline u8 celleb_fake_config_readb(void *addr) static inline u16 celleb_fake_config_readw(void *addr) { - u16 *p = addr; + __le16 *p = addr; return le16_to_cpu(*p); } static inline u32 celleb_fake_config_readl(void *addr) { - u32 *p = addr; + __le32 *p = addr; return le32_to_cpu(*p); } @@ -83,16 +83,16 @@ static inline void celleb_fake_config_writeb(u32 val, void *addr) static inline void celleb_fake_config_writew(u32 val, void *addr) { - u16 val16; - u16 *p = addr; + __le16 val16; + __le16 *p = addr; val16 = cpu_to_le16(val); *p = val16; } static inline void celleb_fake_config_writel(u32 val, void *addr) { - u32 val32; - u32 *p = addr; + __le32 val32; + __le32 *p = addr; val32 = cpu_to_le32(val); *p = val32; } diff --git a/arch/powerpc/platforms/celleb/scc_epci.c b/arch/powerpc/platforms/celleb/scc_epci.c index 0edbc0c4f338..c11b39c3776a 100644 --- a/arch/powerpc/platforms/celleb/scc_epci.c +++ b/arch/powerpc/platforms/celleb/scc_epci.c @@ -47,7 +47,7 @@ #if 0 /* test code for epci dummy read */ static void celleb_epci_dummy_read(struct pci_dev *dev) { - void *epci_base; + void __iomem *epci_base; struct device_node *node; struct pci_controller *hose; u32 val; @@ -58,7 +58,7 @@ static void celleb_epci_dummy_read(struct pci_dev *dev) if (!hose) return; - epci_base = (void *)hose->cfg_addr; + epci_base = hose->cfg_addr; val = in_be32(epci_base + SCC_EPCI_WATRP); iosync(); @@ -71,18 +71,18 @@ static inline void clear_and_disable_master_abort_interrupt( struct pci_controller *hose) { void __iomem *addr; - addr = (void *)hose->cfg_addr + PCI_COMMAND; + addr = hose->cfg_addr + PCI_COMMAND; out_be32(addr, in_be32(addr) | (PCI_STATUS_REC_MASTER_ABORT << 16)); } static int celleb_epci_check_abort(struct pci_controller *hose, - unsigned long addr) + void __iomem *addr) { void __iomem *reg, *epci_base; u32 val; iob(); - epci_base = (void *)hose->cfg_addr; + epci_base = hose->cfg_addr; reg = epci_base + PCI_COMMAND; val = in_be32(reg); @@ -108,23 +108,23 @@ static int celleb_epci_check_abort(struct pci_controller *hose, return PCIBIOS_SUCCESSFUL; } -static unsigned long celleb_epci_make_config_addr(struct pci_controller *hose, +static void __iomem *celleb_epci_make_config_addr(struct pci_controller *hose, unsigned int devfn, int where) { - unsigned long addr; + void __iomem *addr; struct pci_bus *bus = hose->bus; if (bus->self) - addr = (unsigned long)hose->cfg_data + + addr = hose->cfg_data + (((bus->number & 0xff) << 16) | ((devfn & 0xff) << 8) | (where & 0xff) | 0x01000000); else - addr = (unsigned long)hose->cfg_data + + addr = hose->cfg_data + (((devfn & 0xff) << 8) | (where & 0xff)); - pr_debug("EPCI: config_addr = 0x%016lx\n", addr); + pr_debug("EPCI: config_addr = 0x%p\n", addr); return addr; } @@ -132,7 +132,7 @@ static unsigned long celleb_epci_make_config_addr(struct pci_controller *hose, static int celleb_epci_read_config(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * val) { - unsigned long addr; + void __iomem *addr; struct device_node *node; struct pci_controller *hose; @@ -148,17 +148,17 @@ static int celleb_epci_read_config(struct pci_bus *bus, if (bus->number == hose->first_busno && devfn == 0) { /* EPCI controller self */ - addr = (unsigned long)hose->cfg_addr + where; + addr = hose->cfg_addr + where; switch (size) { case 1: - *val = in_8((u8 *)addr); + *val = in_8(addr); break; case 2: - *val = in_be16((u16 *)addr); + *val = in_be16(addr); break; case 4: - *val = in_be32((u32 *)addr); + *val = in_be32(addr); break; default: return PCIBIOS_DEVICE_NOT_FOUND; @@ -171,13 +171,13 @@ static int celleb_epci_read_config(struct pci_bus *bus, switch (size) { case 1: - *val = in_8((u8 *)addr); + *val = in_8(addr); break; case 2: - *val = in_le16((u16 *)addr); + *val = in_le16(addr); break; case 4: - *val = in_le32((u32 *)addr); + *val = in_le32(addr); break; default: return PCIBIOS_DEVICE_NOT_FOUND; @@ -188,13 +188,13 @@ static int celleb_epci_read_config(struct pci_bus *bus, "addr=0x%lx, devfn=0x%x, where=0x%x, size=0x%x, val=0x%x\n", addr, devfn, where, size, *val); - return celleb_epci_check_abort(hose, 0); + return celleb_epci_check_abort(hose, NULL); } static int celleb_epci_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val) { - unsigned long addr; + void __iomem *addr; struct device_node *node; struct pci_controller *hose; @@ -210,17 +210,17 @@ static int celleb_epci_write_config(struct pci_bus *bus, if (bus->number == hose->first_busno && devfn == 0) { /* EPCI controller self */ - addr = (unsigned long)hose->cfg_addr + where; + addr = hose->cfg_addr + where; switch (size) { case 1: - out_8((u8 *)addr, val); + out_8(addr, val); break; case 2: - out_be16((u16 *)addr, val); + out_be16(addr, val); break; case 4: - out_be32((u32 *)addr, val); + out_be32(addr, val); break; default: return PCIBIOS_DEVICE_NOT_FOUND; @@ -233,13 +233,13 @@ static int celleb_epci_write_config(struct pci_bus *bus, switch (size) { case 1: - out_8((u8 *)addr, val); + out_8(addr, val); break; case 2: - out_le16((u16 *)addr, val); + out_le16(addr, val); break; case 4: - out_le32((u32 *)addr, val); + out_le32(addr, val); break; default: return PCIBIOS_DEVICE_NOT_FOUND; @@ -261,7 +261,7 @@ static int __devinit celleb_epci_init(struct pci_controller *hose) void __iomem *reg, *epci_base; int hwres = 0; - epci_base = (void *)hose->cfg_addr; + epci_base = hose->cfg_addr; /* PCI core reset(Internal bus and PCI clock) */ reg = epci_base + SCC_EPCI_CKCTRL; -- cgit v1.2.3 From 7d91d531900bfa1165d445390b3b13a8013f98f7 Mon Sep 17 00:00:00 2001 From: Roland McGrath Date: Thu, 8 Feb 2007 14:20:42 -0800 Subject: [PATCH] i386 vDSO: use install_special_mapping This patch uses install_special_mapping for the i386 vDSO setup, consolidating duplicated code. Signed-off-by: Roland McGrath Cc: Ingo Molnar Cc: Paul Mackerras Cc: Benjamin Herrenschmidt Cc: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/sysenter.c | 53 ++++++++++----------------------------------- 1 file changed, 11 insertions(+), 42 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/sysenter.c b/arch/i386/kernel/sysenter.c index 5da744204d10..bc882a2b1db6 100644 --- a/arch/i386/kernel/sysenter.c +++ b/arch/i386/kernel/sysenter.c @@ -70,11 +70,12 @@ void enable_sep_cpu(void) */ extern const char vsyscall_int80_start, vsyscall_int80_end; extern const char vsyscall_sysenter_start, vsyscall_sysenter_end; -static void *syscall_page; +static struct page *syscall_pages[1]; int __init sysenter_setup(void) { - syscall_page = (void *)get_zeroed_page(GFP_ATOMIC); + void *syscall_page = (void *)get_zeroed_page(GFP_ATOMIC); + syscall_pages[0] = virt_to_page(syscall_page); #ifdef CONFIG_COMPAT_VDSO __set_fixmap(FIX_VDSO, __pa(syscall_page), PAGE_READONLY); @@ -96,31 +97,12 @@ int __init sysenter_setup(void) } #ifndef CONFIG_COMPAT_VDSO -static struct page *syscall_nopage(struct vm_area_struct *vma, - unsigned long adr, int *type) -{ - struct page *p = virt_to_page(adr - vma->vm_start + syscall_page); - get_page(p); - return p; -} - -/* Prevent VMA merging */ -static void syscall_vma_close(struct vm_area_struct *vma) -{ -} - -static struct vm_operations_struct syscall_vm_ops = { - .close = syscall_vma_close, - .nopage = syscall_nopage, -}; - /* Defined in vsyscall-sysenter.S */ extern void SYSENTER_RETURN; /* Setup a VMA at program startup for the vsyscall page */ int arch_setup_additional_pages(struct linux_binprm *bprm, int exstack) { - struct vm_area_struct *vma; struct mm_struct *mm = current->mm; unsigned long addr; int ret; @@ -132,38 +114,25 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int exstack) goto up_fail; } - vma = kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL); - if (!vma) { - ret = -ENOMEM; - goto up_fail; - } - - vma->vm_start = addr; - vma->vm_end = addr + PAGE_SIZE; - /* MAYWRITE to allow gdb to COW and set breakpoints */ - vma->vm_flags = VM_READ|VM_EXEC|VM_MAYREAD|VM_MAYEXEC|VM_MAYWRITE; /* + * MAYWRITE to allow gdb to COW and set breakpoints + * * Make sure the vDSO gets into every core dump. * Dumping its contents makes post-mortem fully interpretable later * without matching up the same kernel and hardware config to see * what PC values meant. */ - vma->vm_flags |= VM_ALWAYSDUMP; - vma->vm_flags |= mm->def_flags; - vma->vm_page_prot = protection_map[vma->vm_flags & 7]; - vma->vm_ops = &syscall_vm_ops; - vma->vm_mm = mm; - - ret = insert_vm_struct(mm, vma); - if (unlikely(ret)) { - kmem_cache_free(vm_area_cachep, vma); + ret = install_special_mapping(mm, addr, PAGE_SIZE, + VM_READ|VM_EXEC| + VM_MAYREAD|VM_MAYWRITE|VM_MAYEXEC| + VM_ALWAYSDUMP, + syscall_pages); + if (ret) goto up_fail; - } current->mm->context.vdso = (void *)addr; current_thread_info()->sysenter_return = (void *)VDSO_SYM(&SYSENTER_RETURN); - mm->total_vm++; up_fail: up_write(&mm->mmap_sem); return ret; -- cgit v1.2.3 From dc5882b20a69fb16219cc61ae3d21d73dd6360a7 Mon Sep 17 00:00:00 2001 From: Roland McGrath Date: Thu, 8 Feb 2007 14:20:43 -0800 Subject: [PATCH] x86_64 ia32 vDSO: use install_special_mapping This patch uses install_special_mapping for the ia32 vDSO setup, consolidating duplicated code. Signed-off-by: Roland McGrath Cc: Ingo Molnar Cc: Paul Mackerras Cc: Benjamin Herrenschmidt Cc: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86_64/ia32/syscall32.c | 59 ++++++++++---------------------------------- 1 file changed, 13 insertions(+), 46 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/ia32/syscall32.c b/arch/x86_64/ia32/syscall32.c index 59f1fa155915..568ff0df89e7 100644 --- a/arch/x86_64/ia32/syscall32.c +++ b/arch/x86_64/ia32/syscall32.c @@ -18,68 +18,34 @@ extern unsigned char syscall32_syscall[], syscall32_syscall_end[]; extern unsigned char syscall32_sysenter[], syscall32_sysenter_end[]; extern int sysctl_vsyscall32; -char *syscall32_page; +static struct page *syscall32_pages[1]; static int use_sysenter = -1; -static struct page * -syscall32_nopage(struct vm_area_struct *vma, unsigned long adr, int *type) -{ - struct page *p = virt_to_page(adr - vma->vm_start + syscall32_page); - get_page(p); - return p; -} - -/* Prevent VMA merging */ -static void syscall32_vma_close(struct vm_area_struct *vma) -{ -} - -static struct vm_operations_struct syscall32_vm_ops = { - .close = syscall32_vma_close, - .nopage = syscall32_nopage, -}; - struct linux_binprm; /* Setup a VMA at program startup for the vsyscall page */ int syscall32_setup_pages(struct linux_binprm *bprm, int exstack) { - int npages = (VSYSCALL32_END - VSYSCALL32_BASE) >> PAGE_SHIFT; - struct vm_area_struct *vma; struct mm_struct *mm = current->mm; int ret; - vma = kmem_cache_alloc(vm_area_cachep, GFP_KERNEL); - if (!vma) - return -ENOMEM; - - memset(vma, 0, sizeof(struct vm_area_struct)); - /* Could randomize here */ - vma->vm_start = VSYSCALL32_BASE; - vma->vm_end = VSYSCALL32_END; - /* MAYWRITE to allow gdb to COW and set breakpoints */ - vma->vm_flags = VM_READ|VM_EXEC|VM_MAYREAD|VM_MAYEXEC|VM_MAYWRITE; + down_write(&mm->mmap_sem); /* + * MAYWRITE to allow gdb to COW and set breakpoints + * * Make sure the vDSO gets into every core dump. * Dumping its contents makes post-mortem fully interpretable later * without matching up the same kernel and hardware config to see * what PC values meant. */ - vma->vm_flags |= VM_ALWAYSDUMP; - vma->vm_flags |= mm->def_flags; - vma->vm_page_prot = protection_map[vma->vm_flags & 7]; - vma->vm_ops = &syscall32_vm_ops; - vma->vm_mm = mm; - - down_write(&mm->mmap_sem); - if ((ret = insert_vm_struct(mm, vma))) { - up_write(&mm->mmap_sem); - kmem_cache_free(vm_area_cachep, vma); - return ret; - } - mm->total_vm += npages; + /* Could randomize here */ + ret = install_special_mapping(mm, VSYSCALL32_BASE, PAGE_SIZE, + VM_READ|VM_EXEC| + VM_MAYREAD|VM_MAYWRITE|VM_MAYEXEC| + VM_ALWAYSDUMP, + syscall32_pages); up_write(&mm->mmap_sem); - return 0; + return ret; } const char *arch_vma_name(struct vm_area_struct *vma) @@ -92,9 +58,10 @@ const char *arch_vma_name(struct vm_area_struct *vma) static int __init init_syscall32(void) { - syscall32_page = (void *)get_zeroed_page(GFP_KERNEL); + char *syscall32_page = (void *)get_zeroed_page(GFP_KERNEL); if (!syscall32_page) panic("Cannot allocate syscall32 page"); + syscall32_pages[0] = virt_to_page(syscall32_page); if (use_sysenter > 0) { memcpy(syscall32_page, syscall32_sysenter, syscall32_sysenter_end - syscall32_sysenter); -- cgit v1.2.3 From c13e4ca247311c294b032089e0d05e96f2708c16 Mon Sep 17 00:00:00 2001 From: Roland McGrath Date: Thu, 8 Feb 2007 14:20:43 -0800 Subject: [PATCH] powerpc vDSO: use install_special_mapping This patch uses install_special_mapping for the powerpc vDSO setup, consolidating duplicated code. Signed-off-by: Roland McGrath Cc: Ingo Molnar Cc: Paul Mackerras Cc: Benjamin Herrenschmidt Cc: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/powerpc/kernel/vdso.c | 104 ++++++++++++--------------------------------- 1 file changed, 27 insertions(+), 77 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c index ae0ede19879d..50149ec6efa4 100644 --- a/arch/powerpc/kernel/vdso.c +++ b/arch/powerpc/kernel/vdso.c @@ -49,9 +49,13 @@ /* Max supported size for symbol names */ #define MAX_SYMNAME 64 +#define VDSO32_MAXPAGES (((0x3000 + PAGE_MASK) >> PAGE_SHIFT) + 2) +#define VDSO64_MAXPAGES (((0x3000 + PAGE_MASK) >> PAGE_SHIFT) + 2) + extern char vdso32_start, vdso32_end; static void *vdso32_kbase = &vdso32_start; unsigned int vdso32_pages; +static struct page *vdso32_pagelist[VDSO32_MAXPAGES]; unsigned long vdso32_sigtramp; unsigned long vdso32_rt_sigtramp; @@ -59,6 +63,7 @@ unsigned long vdso32_rt_sigtramp; extern char vdso64_start, vdso64_end; static void *vdso64_kbase = &vdso64_start; unsigned int vdso64_pages; +static struct page *vdso64_pagelist[VDSO64_MAXPAGES]; unsigned long vdso64_rt_sigtramp; #endif /* CONFIG_PPC64 */ @@ -164,55 +169,6 @@ static void dump_vdso_pages(struct vm_area_struct * vma) } #endif /* DEBUG */ -/* - * Keep a dummy vma_close for now, it will prevent VMA merging. - */ -static void vdso_vma_close(struct vm_area_struct * vma) -{ -} - -/* - * Our nopage() function, maps in the actual vDSO kernel pages, they will - * be mapped read-only by do_no_page(), and eventually COW'ed, either - * right away for an initial write access, or by do_wp_page(). - */ -static struct page * vdso_vma_nopage(struct vm_area_struct * vma, - unsigned long address, int *type) -{ - unsigned long offset = address - vma->vm_start; - struct page *pg; -#ifdef CONFIG_PPC64 - void *vbase = (vma->vm_mm->task_size > TASK_SIZE_USER32) ? - vdso64_kbase : vdso32_kbase; -#else - void *vbase = vdso32_kbase; -#endif - - DBG("vdso_vma_nopage(current: %s, address: %016lx, off: %lx)\n", - current->comm, address, offset); - - if (address < vma->vm_start || address > vma->vm_end) - return NOPAGE_SIGBUS; - - /* - * Last page is systemcfg. - */ - if ((vma->vm_end - address) <= PAGE_SIZE) - pg = virt_to_page(vdso_data); - else - pg = virt_to_page(vbase + offset); - - get_page(pg); - DBG(" ->page count: %d\n", page_count(pg)); - - return pg; -} - -static struct vm_operations_struct vdso_vmops = { - .close = vdso_vma_close, - .nopage = vdso_vma_nopage, -}; - /* * This is called from binfmt_elf, we create the special vma for the * vDSO and insert it into the mm struct tree @@ -221,20 +177,23 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int executable_stack) { struct mm_struct *mm = current->mm; - struct vm_area_struct *vma; + struct page **vdso_pagelist; unsigned long vdso_pages; unsigned long vdso_base; int rc; #ifdef CONFIG_PPC64 if (test_thread_flag(TIF_32BIT)) { + vdso_pagelist = vdso32_pagelist; vdso_pages = vdso32_pages; vdso_base = VDSO32_MBASE; } else { + vdso_pagelist = vdso64_pagelist; vdso_pages = vdso64_pages; vdso_base = VDSO64_MBASE; } #else + vdso_pagelist = vdso32_pagelist; vdso_pages = vdso32_pages; vdso_base = VDSO32_MBASE; #endif @@ -262,17 +221,6 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, goto fail_mmapsem; } - - /* Allocate a VMA structure and fill it up */ - vma = kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL); - if (vma == NULL) { - rc = -ENOMEM; - goto fail_mmapsem; - } - vma->vm_mm = mm; - vma->vm_start = vdso_base; - vma->vm_end = vma->vm_start + (vdso_pages << PAGE_SHIFT); - /* * our vma flags don't have VM_WRITE so by default, the process isn't * allowed to write those pages. @@ -282,32 +230,26 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, * and your nice userland gettimeofday will be totally dead. * It's fine to use that for setting breakpoints in the vDSO code * pages though - */ - vma->vm_flags = VM_READ|VM_EXEC|VM_MAYREAD|VM_MAYWRITE|VM_MAYEXEC; - /* + * * Make sure the vDSO gets into every core dump. * Dumping its contents makes post-mortem fully interpretable later * without matching up the same kernel and hardware config to see * what PC values meant. */ - vma->vm_flags |= VM_ALWAYSDUMP; - vma->vm_flags |= mm->def_flags; - vma->vm_page_prot = protection_map[vma->vm_flags & 0x7]; - vma->vm_ops = &vdso_vmops; - - /* Insert new VMA */ - rc = insert_vm_struct(mm, vma); + rc = install_special_mapping(mm, vdso_base, vdso_pages << PAGE_SHIFT, + VM_READ|VM_EXEC| + VM_MAYREAD|VM_MAYWRITE|VM_MAYEXEC| + VM_ALWAYSDUMP, + vdso_pagelist); if (rc) - goto fail_vma; + goto fail_mmapsem; - /* Put vDSO base into mm struct and account for memory usage */ + /* Put vDSO base into mm struct */ current->mm->context.vdso_base = vdso_base; - mm->total_vm += (vma->vm_end - vma->vm_start) >> PAGE_SHIFT; + up_write(&mm->mmap_sem); return 0; - fail_vma: - kmem_cache_free(vm_area_cachep, vma); fail_mmapsem: up_write(&mm->mmap_sem); return rc; @@ -778,18 +720,26 @@ void __init vdso_init(void) } /* Make sure pages are in the correct state */ + BUG_ON(vdso32_pages + 2 > VDSO32_MAXPAGES); for (i = 0; i < vdso32_pages; i++) { struct page *pg = virt_to_page(vdso32_kbase + i*PAGE_SIZE); ClearPageReserved(pg); get_page(pg); - + vdso32_pagelist[i] = pg; } + vdso32_pagelist[i++] = virt_to_page(vdso_data); + vdso32_pagelist[i] = NULL; + #ifdef CONFIG_PPC64 + BUG_ON(vdso64_pages + 2 > VDSO64_MAXPAGES); for (i = 0; i < vdso64_pages; i++) { struct page *pg = virt_to_page(vdso64_kbase + i*PAGE_SIZE); ClearPageReserved(pg); get_page(pg); + vdso64_pagelist[i] = pg; } + vdso64_pagelist[i++] = virt_to_page(vdso_data); + vdso64_pagelist[i] = NULL; #endif /* CONFIG_PPC64 */ get_page(virt_to_page(vdso_data)); -- cgit v1.2.3 From 2affc857efdf7dacace234b63d289d67260c95a6 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 8 Feb 2007 14:20:44 -0800 Subject: [PATCH] SH vdso: use install_special_mapping() Signed-off-by: Paul Mundt Cc: Roland McGrath Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/sh/kernel/vsyscall/vsyscall.c | 58 ++++++-------------------------------- 1 file changed, 9 insertions(+), 49 deletions(-) (limited to 'arch') diff --git a/arch/sh/kernel/vsyscall/vsyscall.c b/arch/sh/kernel/vsyscall/vsyscall.c index deb46941f315..7b0f66f03319 100644 --- a/arch/sh/kernel/vsyscall/vsyscall.c +++ b/arch/sh/kernel/vsyscall/vsyscall.c @@ -37,11 +37,12 @@ __setup("vdso=", vdso_setup); * of the ELF DSO images included therein. */ extern const char vsyscall_trapa_start, vsyscall_trapa_end; -static void *syscall_page; +static struct page *syscall_pages[1]; int __init vsyscall_init(void) { - syscall_page = (void *)get_zeroed_page(GFP_ATOMIC); + void *syscall_page = (void *)get_zeroed_page(GFP_ATOMIC); + syscall_pages[0] = virt_to_page(syscall_page); /* * XXX: Map this page to a fixmap entry if we get around @@ -55,37 +56,10 @@ int __init vsyscall_init(void) return 0; } -static struct page *syscall_vma_nopage(struct vm_area_struct *vma, - unsigned long address, int *type) -{ - unsigned long offset = address - vma->vm_start; - struct page *page; - - if (address < vma->vm_start || address > vma->vm_end) - return NOPAGE_SIGBUS; - - page = virt_to_page(syscall_page + offset); - - get_page(page); - - return page; -} - -/* Prevent VMA merging */ -static void syscall_vma_close(struct vm_area_struct *vma) -{ -} - -static struct vm_operations_struct syscall_vm_ops = { - .nopage = syscall_vma_nopage, - .close = syscall_vma_close, -}; - /* Setup a VMA at program startup for the vsyscall page */ int arch_setup_additional_pages(struct linux_binprm *bprm, int executable_stack) { - struct vm_area_struct *vma; struct mm_struct *mm = current->mm; unsigned long addr; int ret; @@ -97,30 +71,16 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, goto up_fail; } - vma = kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL); - if (!vma) { - ret = -ENOMEM; + ret = install_special_mapping(mm, addr, PAGE_SIZE, + VM_READ | VM_EXEC | + VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC | + VM_ALWAYSDUMP, + syscall_pages); + if (unlikely(ret)) goto up_fail; - } - - vma->vm_start = addr; - vma->vm_end = addr + PAGE_SIZE; - /* MAYWRITE to allow gdb to COW and set breakpoints */ - vma->vm_flags = VM_READ|VM_EXEC|VM_MAYREAD|VM_MAYEXEC|VM_MAYWRITE; - vma->vm_flags |= mm->def_flags; - vma->vm_page_prot = protection_map[vma->vm_flags & 7]; - vma->vm_ops = &syscall_vm_ops; - vma->vm_mm = mm; - - ret = insert_vm_struct(mm, vma); - if (unlikely(ret)) { - kmem_cache_free(vm_area_cachep, vma); - goto up_fail; - } current->mm->context.vdso = (void *)addr; - mm->total_vm++; up_fail: up_write(&mm->mmap_sem); return ret; -- cgit v1.2.3 From 49baa91d6863df480fa05eb57524a274f77fa886 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 8 Feb 2007 01:11:00 -0600 Subject: [POWERPC] 83xx: Updated and renamed MPC834x SYS to MPC834x MDS The MPC834x SYS board has always been called the MPC834x MDS since its public release. Removed all references to SYS and replaced with MDS. Additionally renamed the .dts to match the defconfig (mpc834x_mds*). Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8349emds.dts | 334 ----------------------------- arch/powerpc/boot/dts/mpc834x_mds.dts | 334 +++++++++++++++++++++++++++++ arch/powerpc/configs/mpc834x_mds_defconfig | 9 +- arch/powerpc/platforms/83xx/Kconfig | 12 +- arch/powerpc/platforms/83xx/Makefile | 2 +- arch/powerpc/platforms/83xx/mpc834x_itx.c | 2 - arch/powerpc/platforms/83xx/mpc834x_mds.c | 213 ++++++++++++++++++ arch/powerpc/platforms/83xx/mpc834x_sys.c | 213 ------------------ arch/powerpc/platforms/83xx/mpc834x_sys.h | 23 -- 9 files changed, 559 insertions(+), 583 deletions(-) delete mode 100644 arch/powerpc/boot/dts/mpc8349emds.dts create mode 100644 arch/powerpc/boot/dts/mpc834x_mds.dts create mode 100644 arch/powerpc/platforms/83xx/mpc834x_mds.c delete mode 100644 arch/powerpc/platforms/83xx/mpc834x_sys.c delete mode 100644 arch/powerpc/platforms/83xx/mpc834x_sys.h (limited to 'arch') diff --git a/arch/powerpc/boot/dts/mpc8349emds.dts b/arch/powerpc/boot/dts/mpc8349emds.dts deleted file mode 100644 index dc121b3cb4a9..000000000000 --- a/arch/powerpc/boot/dts/mpc8349emds.dts +++ /dev/null @@ -1,334 +0,0 @@ -/* - * MPC8349E MDS Device Tree Source - * - * Copyright 2005, 2006 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -/ { - model = "MPC8349EMDS"; - compatible = "MPC834xMDS"; - #address-cells = <1>; - #size-cells = <1>; - - cpus { - #cpus = <1>; - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,8349@0 { - device_type = "cpu"; - reg = <0>; - d-cache-line-size = <20>; // 32 bytes - i-cache-line-size = <20>; // 32 bytes - d-cache-size = <8000>; // L1, 32K - i-cache-size = <8000>; // L1, 32K - timebase-frequency = <0>; // from bootloader - bus-frequency = <0>; // from bootloader - clock-frequency = <0>; // from bootloader - 32-bit; - }; - }; - - memory { - device_type = "memory"; - reg = <00000000 10000000>; // 256MB at 0 - }; - - bcsr@e2400000 { - device_type = "board-control"; - reg = ; - }; - - soc8349@e0000000 { - #address-cells = <1>; - #size-cells = <1>; - #interrupt-cells = <2>; - device_type = "soc"; - ranges = <0 e0000000 00100000>; - reg = ; - bus-frequency = <0>; - - wdt@200 { - device_type = "watchdog"; - compatible = "mpc83xx_wdt"; - reg = <200 100>; - }; - - i2c@3000 { - device_type = "i2c"; - compatible = "fsl-i2c"; - reg = <3000 100>; - interrupts = ; - interrupt-parent = <700>; - dfsrr; - }; - - i2c@3100 { - device_type = "i2c"; - compatible = "fsl-i2c"; - reg = <3100 100>; - interrupts = ; - interrupt-parent = <700>; - dfsrr; - }; - - spi@7000 { - device_type = "spi"; - compatible = "mpc83xx_spi"; - reg = <7000 1000>; - interrupts = <10 8>; - interrupt-parent = <700>; - mode = <0>; - }; - - /* phy type (ULPI or SERIAL) are only types supportted for MPH */ - /* port = 0 or 1 */ - usb@22000 { - device_type = "usb"; - compatible = "fsl-usb2-mph"; - reg = <22000 1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <700>; - interrupts = <27 2>; - phy_type = "ulpi"; - port1; - }; - /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ - usb@23000 { - device_type = "usb"; - compatible = "fsl-usb2-dr"; - reg = <23000 1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <700>; - interrupts = <26 2>; - dr_mode = "otg"; - phy_type = "ulpi"; - }; - - mdio@24520 { - device_type = "mdio"; - compatible = "gianfar"; - reg = <24520 20>; - #address-cells = <1>; - #size-cells = <0>; - linux,phandle = <24520>; - ethernet-phy@0 { - linux,phandle = <2452000>; - interrupt-parent = <700>; - interrupts = <11 2>; - reg = <0>; - device_type = "ethernet-phy"; - }; - ethernet-phy@1 { - linux,phandle = <2452001>; - interrupt-parent = <700>; - interrupts = <12 2>; - reg = <1>; - device_type = "ethernet-phy"; - }; - }; - - ethernet@24000 { - device_type = "network"; - model = "TSEC"; - compatible = "gianfar"; - reg = <24000 1000>; - address = [ 00 00 00 00 00 00 ]; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <20 8 21 8 22 8>; - interrupt-parent = <700>; - phy-handle = <2452000>; - }; - - ethernet@25000 { - #address-cells = <1>; - #size-cells = <0>; - device_type = "network"; - model = "TSEC"; - compatible = "gianfar"; - reg = <25000 1000>; - address = [ 00 00 00 00 00 00 ]; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <23 8 24 8 25 8>; - interrupt-parent = <700>; - phy-handle = <2452001>; - }; - - serial@4500 { - device_type = "serial"; - compatible = "ns16550"; - reg = <4500 100>; - clock-frequency = <0>; - interrupts = <9 8>; - interrupt-parent = <700>; - }; - - serial@4600 { - device_type = "serial"; - compatible = "ns16550"; - reg = <4600 100>; - clock-frequency = <0>; - interrupts = ; - interrupt-parent = <700>; - }; - - pci@8500 { - interrupt-map-mask = ; - interrupt-map = < - - /* IDSEL 0x11 */ - 8800 0 0 1 700 14 8 - 8800 0 0 2 700 15 8 - 8800 0 0 3 700 16 8 - 8800 0 0 4 700 17 8 - - /* IDSEL 0x12 */ - 9000 0 0 1 700 16 8 - 9000 0 0 2 700 17 8 - 9000 0 0 3 700 14 8 - 9000 0 0 4 700 15 8 - - /* IDSEL 0x13 */ - 9800 0 0 1 700 17 8 - 9800 0 0 2 700 14 8 - 9800 0 0 3 700 15 8 - 9800 0 0 4 700 16 8 - - /* IDSEL 0x15 */ - a800 0 0 1 700 14 8 - a800 0 0 2 700 15 8 - a800 0 0 3 700 16 8 - a800 0 0 4 700 17 8 - - /* IDSEL 0x16 */ - b000 0 0 1 700 17 8 - b000 0 0 2 700 14 8 - b000 0 0 3 700 15 8 - b000 0 0 4 700 16 8 - - /* IDSEL 0x17 */ - b800 0 0 1 700 16 8 - b800 0 0 2 700 17 8 - b800 0 0 3 700 14 8 - b800 0 0 4 700 15 8 - - /* IDSEL 0x18 */ - c000 0 0 1 700 15 8 - c000 0 0 2 700 16 8 - c000 0 0 3 700 17 8 - c000 0 0 4 700 14 8>; - interrupt-parent = <700>; - interrupts = <42 8>; - bus-range = <0 0>; - ranges = <02000000 0 a0000000 a0000000 0 10000000 - 42000000 0 80000000 80000000 0 10000000 - 01000000 0 00000000 e2000000 0 00100000>; - clock-frequency = <3f940aa>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <8500 100>; - compatible = "83xx"; - device_type = "pci"; - }; - - pci@8600 { - interrupt-map-mask = ; - interrupt-map = < - - /* IDSEL 0x11 */ - 8800 0 0 1 700 14 8 - 8800 0 0 2 700 15 8 - 8800 0 0 3 700 16 8 - 8800 0 0 4 700 17 8 - - /* IDSEL 0x12 */ - 9000 0 0 1 700 16 8 - 9000 0 0 2 700 17 8 - 9000 0 0 3 700 14 8 - 9000 0 0 4 700 15 8 - - /* IDSEL 0x13 */ - 9800 0 0 1 700 17 8 - 9800 0 0 2 700 14 8 - 9800 0 0 3 700 15 8 - 9800 0 0 4 700 16 8 - - /* IDSEL 0x15 */ - a800 0 0 1 700 14 8 - a800 0 0 2 700 15 8 - a800 0 0 3 700 16 8 - a800 0 0 4 700 17 8 - - /* IDSEL 0x16 */ - b000 0 0 1 700 17 8 - b000 0 0 2 700 14 8 - b000 0 0 3 700 15 8 - b000 0 0 4 700 16 8 - - /* IDSEL 0x17 */ - b800 0 0 1 700 16 8 - b800 0 0 2 700 17 8 - b800 0 0 3 700 14 8 - b800 0 0 4 700 15 8 - - /* IDSEL 0x18 */ - c000 0 0 1 700 15 8 - c000 0 0 2 700 16 8 - c000 0 0 3 700 17 8 - c000 0 0 4 700 14 8>; - interrupt-parent = <700>; - interrupts = <42 8>; - bus-range = <0 0>; - ranges = <02000000 0 b0000000 b0000000 0 10000000 - 42000000 0 90000000 90000000 0 10000000 - 01000000 0 00000000 e2100000 0 00100000>; - clock-frequency = <3f940aa>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <8600 100>; - compatible = "83xx"; - device_type = "pci"; - }; - - /* May need to remove if on a part without crypto engine */ - crypto@30000 { - device_type = "crypto"; - model = "SEC2"; - compatible = "talitos"; - reg = <30000 10000>; - interrupts = ; - interrupt-parent = <700>; - num-channels = <4>; - channel-fifo-len = <18>; - exec-units-mask = <0000007e>; - /* desc mask is for rev2.0, - * we need runtime fixup for >2.0 */ - descriptor-types-mask = <01010ebf>; - }; - - /* IPIC - * interrupts cell = - * sense values match linux IORESOURCE_IRQ_* defines: - * sense == 8: Level, low assertion - * sense == 2: Edge, high-to-low change - */ - pic@700 { - linux,phandle = <700>; - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <700 100>; - built-in; - device_type = "ipic"; - }; - }; -}; diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts new file mode 100644 index 000000000000..dc121b3cb4a9 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc834x_mds.dts @@ -0,0 +1,334 @@ +/* + * MPC8349E MDS Device Tree Source + * + * Copyright 2005, 2006 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/ { + model = "MPC8349EMDS"; + compatible = "MPC834xMDS"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8349@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <8000>; // L1, 32K + i-cache-size = <8000>; // L1, 32K + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + 32-bit; + }; + }; + + memory { + device_type = "memory"; + reg = <00000000 10000000>; // 256MB at 0 + }; + + bcsr@e2400000 { + device_type = "board-control"; + reg = ; + }; + + soc8349@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 e0000000 00100000>; + reg = ; + bus-frequency = <0>; + + wdt@200 { + device_type = "watchdog"; + compatible = "mpc83xx_wdt"; + reg = <200 100>; + }; + + i2c@3000 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3000 100>; + interrupts = ; + interrupt-parent = <700>; + dfsrr; + }; + + i2c@3100 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3100 100>; + interrupts = ; + interrupt-parent = <700>; + dfsrr; + }; + + spi@7000 { + device_type = "spi"; + compatible = "mpc83xx_spi"; + reg = <7000 1000>; + interrupts = <10 8>; + interrupt-parent = <700>; + mode = <0>; + }; + + /* phy type (ULPI or SERIAL) are only types supportted for MPH */ + /* port = 0 or 1 */ + usb@22000 { + device_type = "usb"; + compatible = "fsl-usb2-mph"; + reg = <22000 1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <700>; + interrupts = <27 2>; + phy_type = "ulpi"; + port1; + }; + /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ + usb@23000 { + device_type = "usb"; + compatible = "fsl-usb2-dr"; + reg = <23000 1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <700>; + interrupts = <26 2>; + dr_mode = "otg"; + phy_type = "ulpi"; + }; + + mdio@24520 { + device_type = "mdio"; + compatible = "gianfar"; + reg = <24520 20>; + #address-cells = <1>; + #size-cells = <0>; + linux,phandle = <24520>; + ethernet-phy@0 { + linux,phandle = <2452000>; + interrupt-parent = <700>; + interrupts = <11 2>; + reg = <0>; + device_type = "ethernet-phy"; + }; + ethernet-phy@1 { + linux,phandle = <2452001>; + interrupt-parent = <700>; + interrupts = <12 2>; + reg = <1>; + device_type = "ethernet-phy"; + }; + }; + + ethernet@24000 { + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <24000 1000>; + address = [ 00 00 00 00 00 00 ]; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <20 8 21 8 22 8>; + interrupt-parent = <700>; + phy-handle = <2452000>; + }; + + ethernet@25000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <25000 1000>; + address = [ 00 00 00 00 00 00 ]; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <23 8 24 8 25 8>; + interrupt-parent = <700>; + phy-handle = <2452001>; + }; + + serial@4500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4500 100>; + clock-frequency = <0>; + interrupts = <9 8>; + interrupt-parent = <700>; + }; + + serial@4600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4600 100>; + clock-frequency = <0>; + interrupts = ; + interrupt-parent = <700>; + }; + + pci@8500 { + interrupt-map-mask = ; + interrupt-map = < + + /* IDSEL 0x11 */ + 8800 0 0 1 700 14 8 + 8800 0 0 2 700 15 8 + 8800 0 0 3 700 16 8 + 8800 0 0 4 700 17 8 + + /* IDSEL 0x12 */ + 9000 0 0 1 700 16 8 + 9000 0 0 2 700 17 8 + 9000 0 0 3 700 14 8 + 9000 0 0 4 700 15 8 + + /* IDSEL 0x13 */ + 9800 0 0 1 700 17 8 + 9800 0 0 2 700 14 8 + 9800 0 0 3 700 15 8 + 9800 0 0 4 700 16 8 + + /* IDSEL 0x15 */ + a800 0 0 1 700 14 8 + a800 0 0 2 700 15 8 + a800 0 0 3 700 16 8 + a800 0 0 4 700 17 8 + + /* IDSEL 0x16 */ + b000 0 0 1 700 17 8 + b000 0 0 2 700 14 8 + b000 0 0 3 700 15 8 + b000 0 0 4 700 16 8 + + /* IDSEL 0x17 */ + b800 0 0 1 700 16 8 + b800 0 0 2 700 17 8 + b800 0 0 3 700 14 8 + b800 0 0 4 700 15 8 + + /* IDSEL 0x18 */ + c000 0 0 1 700 15 8 + c000 0 0 2 700 16 8 + c000 0 0 3 700 17 8 + c000 0 0 4 700 14 8>; + interrupt-parent = <700>; + interrupts = <42 8>; + bus-range = <0 0>; + ranges = <02000000 0 a0000000 a0000000 0 10000000 + 42000000 0 80000000 80000000 0 10000000 + 01000000 0 00000000 e2000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <8500 100>; + compatible = "83xx"; + device_type = "pci"; + }; + + pci@8600 { + interrupt-map-mask = ; + interrupt-map = < + + /* IDSEL 0x11 */ + 8800 0 0 1 700 14 8 + 8800 0 0 2 700 15 8 + 8800 0 0 3 700 16 8 + 8800 0 0 4 700 17 8 + + /* IDSEL 0x12 */ + 9000 0 0 1 700 16 8 + 9000 0 0 2 700 17 8 + 9000 0 0 3 700 14 8 + 9000 0 0 4 700 15 8 + + /* IDSEL 0x13 */ + 9800 0 0 1 700 17 8 + 9800 0 0 2 700 14 8 + 9800 0 0 3 700 15 8 + 9800 0 0 4 700 16 8 + + /* IDSEL 0x15 */ + a800 0 0 1 700 14 8 + a800 0 0 2 700 15 8 + a800 0 0 3 700 16 8 + a800 0 0 4 700 17 8 + + /* IDSEL 0x16 */ + b000 0 0 1 700 17 8 + b000 0 0 2 700 14 8 + b000 0 0 3 700 15 8 + b000 0 0 4 700 16 8 + + /* IDSEL 0x17 */ + b800 0 0 1 700 16 8 + b800 0 0 2 700 17 8 + b800 0 0 3 700 14 8 + b800 0 0 4 700 15 8 + + /* IDSEL 0x18 */ + c000 0 0 1 700 15 8 + c000 0 0 2 700 16 8 + c000 0 0 3 700 17 8 + c000 0 0 4 700 14 8>; + interrupt-parent = <700>; + interrupts = <42 8>; + bus-range = <0 0>; + ranges = <02000000 0 b0000000 b0000000 0 10000000 + 42000000 0 90000000 90000000 0 10000000 + 01000000 0 00000000 e2100000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <8600 100>; + compatible = "83xx"; + device_type = "pci"; + }; + + /* May need to remove if on a part without crypto engine */ + crypto@30000 { + device_type = "crypto"; + model = "SEC2"; + compatible = "talitos"; + reg = <30000 10000>; + interrupts = ; + interrupt-parent = <700>; + num-channels = <4>; + channel-fifo-len = <18>; + exec-units-mask = <0000007e>; + /* desc mask is for rev2.0, + * we need runtime fixup for >2.0 */ + descriptor-types-mask = <01010ebf>; + }; + + /* IPIC + * interrupts cell = + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + pic@700 { + linux,phandle = <700>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <700 100>; + built-in; + device_type = "ipic"; + }; + }; +}; diff --git a/arch/powerpc/configs/mpc834x_mds_defconfig b/arch/powerpc/configs/mpc834x_mds_defconfig index 9eaed3a36983..2e3f8efb6ab1 100644 --- a/arch/powerpc/configs/mpc834x_mds_defconfig +++ b/arch/powerpc/configs/mpc834x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20-rc5 -# Fri Jan 26 00:19:27 2007 +# Linux kernel version: 2.6.20 +# Thu Feb 8 01:00:48 2007 # # CONFIG_PPC64 is not set CONFIG_PPC32=y @@ -34,9 +34,9 @@ CONFIG_DEFAULT_UIMAGE=y CONFIG_PPC_83xx=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_86xx is not set +# CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set -# CONFIG_8xx is not set # CONFIG_E200 is not set CONFIG_6xx=y CONFIG_83xx=y @@ -128,8 +128,9 @@ CONFIG_PPC_GEN550=y # # Platform support # +# CONFIG_MPC8313_RDB is not set # CONFIG_MPC832x_MDS is not set -CONFIG_MPC834x_SYS=y +CONFIG_MPC834x_MDS=y # CONFIG_MPC834x_ITX is not set # CONFIG_MPC8360E_PB is not set CONFIG_MPC834x=y diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig index 46883c5136ac..1aea1e69ff31 100644 --- a/arch/powerpc/platforms/83xx/Kconfig +++ b/arch/powerpc/platforms/83xx/Kconfig @@ -3,7 +3,7 @@ menu "Platform support" choice prompt "Machine Type" - default MPC834x_SYS + default MPC834x_MDS config MPC8313_RDB bool "Freescale MPC8313 RDB" @@ -18,13 +18,13 @@ config MPC832x_MDS help This option enables support for the MPC832x MDS evaluation board. -config MPC834x_SYS - bool "Freescale MPC834x SYS" +config MPC834x_MDS + bool "Freescale MPC834x MDS" select DEFAULT_UIMAGE help - This option enables support for the MPC 834x SYS evaluation board. + This option enables support for the MPC 834x MDS evaluation board. - Be aware that PCI buses can only function when SYS board is plugged + Be aware that PCI buses can only function when MDS board is plugged into the PIB (Platform IO Board) board from Freescale which provide 3 PCI slots. The PIBs PCI initialization is the bootloader's responsibility. @@ -63,7 +63,7 @@ config MPC834x bool select PPC_UDBG_16550 select PPC_INDIRECT_PCI - default y if MPC834x_SYS || MPC834x_ITX + default y if MPC834x_MDS || MPC834x_ITX config PPC_MPC836x bool diff --git a/arch/powerpc/platforms/83xx/Makefile b/arch/powerpc/platforms/83xx/Makefile index 0b732a79c0a8..6c8199c4c382 100644 --- a/arch/powerpc/platforms/83xx/Makefile +++ b/arch/powerpc/platforms/83xx/Makefile @@ -4,7 +4,7 @@ obj-y := misc.o obj-$(CONFIG_PCI) += pci.o obj-$(CONFIG_MPC8313_RDB) += mpc8313_rdb.o -obj-$(CONFIG_MPC834x_SYS) += mpc834x_sys.o +obj-$(CONFIG_MPC834x_MDS) += mpc834x_mds.o obj-$(CONFIG_MPC834x_ITX) += mpc834x_itx.o obj-$(CONFIG_MPC8360E_PB) += mpc8360e_pb.o obj-$(CONFIG_MPC832x_MDS) += mpc832x_mds.o diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.c b/arch/powerpc/platforms/83xx/mpc834x_itx.c index 2446dea9407e..443a3172f370 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_itx.c +++ b/arch/powerpc/platforms/83xx/mpc834x_itx.c @@ -38,8 +38,6 @@ #include "mpc83xx.h" -#include - #ifndef CONFIG_PCI unsigned long isa_io_base = 0; unsigned long isa_mem_base = 0; diff --git a/arch/powerpc/platforms/83xx/mpc834x_mds.c b/arch/powerpc/platforms/83xx/mpc834x_mds.c new file mode 100644 index 000000000000..d2736da76c46 --- /dev/null +++ b/arch/powerpc/platforms/83xx/mpc834x_mds.c @@ -0,0 +1,213 @@ +/* + * arch/powerpc/platforms/83xx/mpc834x_mds.c + * + * MPC834x MDS board specific routines + * + * Maintainer: Kumar Gala + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "mpc83xx.h" + +#ifndef CONFIG_PCI +unsigned long isa_io_base = 0; +unsigned long isa_mem_base = 0; +#endif + +#define BCSR5_INT_USB 0x02 +/* Note: This is only for PB, not for PB+PIB + * On PB only port0 is connected using ULPI */ +static int mpc834x_usb_cfg(void) +{ + unsigned long sccr, sicrl; + void __iomem *immap; + void __iomem *bcsr_regs = NULL; + u8 bcsr5; + struct device_node *np = NULL; + int port0_is_dr = 0; + + if ((np = of_find_compatible_node(np, "usb", "fsl-usb2-dr")) != NULL) + port0_is_dr = 1; + if ((np = of_find_compatible_node(np, "usb", "fsl-usb2-mph")) != NULL){ + if (port0_is_dr) { + printk(KERN_WARNING + "There is only one USB port on PB board! \n"); + return -1; + } else if (!port0_is_dr) + /* No usb port enabled */ + return -1; + } + + immap = ioremap(get_immrbase(), 0x1000); + if (!immap) + return -1; + + /* Configure clock */ + sccr = in_be32(immap + MPC83XX_SCCR_OFFS); + if (port0_is_dr) + sccr |= MPC83XX_SCCR_USB_DRCM_11; /* 1:3 */ + else + sccr |= MPC83XX_SCCR_USB_MPHCM_11; /* 1:3 */ + out_be32(immap + MPC83XX_SCCR_OFFS, sccr); + + /* Configure Pin */ + sicrl = in_be32(immap + MPC83XX_SICRL_OFFS); + /* set port0 only */ + if (port0_is_dr) + sicrl |= MPC83XX_SICRL_USB0; + else + sicrl &= ~(MPC83XX_SICRL_USB0); + out_be32(immap + MPC83XX_SICRL_OFFS, sicrl); + + iounmap(immap); + + /* Map BCSR area */ + np = of_find_node_by_name(NULL, "bcsr"); + if (np != 0) { + struct resource res; + + of_address_to_resource(np, 0, &res); + bcsr_regs = ioremap(res.start, res.end - res.start + 1); + of_node_put(np); + } + if (!bcsr_regs) + return -1; + + /* + * if MDS board is plug into PIB board, + * force to use the PHY on MDS board + */ + bcsr5 = in_8(bcsr_regs + 5); + if (!(bcsr5 & BCSR5_INT_USB)) + out_8(bcsr_regs + 5, (bcsr5 | BCSR5_INT_USB)); + iounmap(bcsr_regs); + return 0; +} + +/* ************************************************************************ + * + * Setup the architecture + * + */ +static void __init mpc834x_mds_setup_arch(void) +{ + struct device_node *np; + + if (ppc_md.progress) + ppc_md.progress("mpc834x_mds_setup_arch()", 0); + + np = of_find_node_by_type(NULL, "cpu"); + if (np != 0) { + const unsigned int *fp = + get_property(np, "clock-frequency", NULL); + if (fp != 0) + loops_per_jiffy = *fp / HZ; + else + loops_per_jiffy = 50000000 / HZ; + of_node_put(np); + } + +#ifdef CONFIG_PCI + for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) + add_bridge(np); + + ppc_md.pci_exclude_device = mpc83xx_exclude_device; +#endif + + mpc834x_usb_cfg(); + +#ifdef CONFIG_ROOT_NFS + ROOT_DEV = Root_NFS; +#else + ROOT_DEV = Root_HDA1; +#endif +} + +static void __init mpc834x_mds_init_IRQ(void) +{ + struct device_node *np; + + np = of_find_node_by_type(NULL, "ipic"); + if (!np) + return; + + ipic_init(np, 0); + + /* Initialize the default interrupt mapping priorities, + * in case the boot rom changed something on us. + */ + ipic_set_default_priority(); +} + +#if defined(CONFIG_I2C_MPC) && defined(CONFIG_SENSORS_DS1374) +extern ulong ds1374_get_rtc_time(void); +extern int ds1374_set_rtc_time(ulong); + +static int __init mpc834x_rtc_hookup(void) +{ + struct timespec tv; + + ppc_md.get_rtc_time = ds1374_get_rtc_time; + ppc_md.set_rtc_time = ds1374_set_rtc_time; + + tv.tv_nsec = 0; + tv.tv_sec = (ppc_md.get_rtc_time) (); + do_settimeofday(&tv); + + return 0; +} + +late_initcall(mpc834x_rtc_hookup); +#endif + +/* + * Called very early, MMU is off, device-tree isn't unflattened + */ +static int __init mpc834x_mds_probe(void) +{ + /* We always match for now, eventually we should look at the flat + dev tree to ensure this is the board we are suppose to run on + */ + return 1; +} + +define_machine(mpc834x_mds) { + .name = "MPC834x MDS", + .probe = mpc834x_mds_probe, + .setup_arch = mpc834x_mds_setup_arch, + .init_IRQ = mpc834x_mds_init_IRQ, + .get_irq = ipic_get_irq, + .restart = mpc83xx_restart, + .time_init = mpc83xx_time_init, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/83xx/mpc834x_sys.c b/arch/powerpc/platforms/83xx/mpc834x_sys.c deleted file mode 100644 index 873ec543c361..000000000000 --- a/arch/powerpc/platforms/83xx/mpc834x_sys.c +++ /dev/null @@ -1,213 +0,0 @@ -/* - * arch/powerpc/platforms/83xx/mpc834x_sys.c - * - * MPC834x SYS board specific routines - * - * Maintainer: Kumar Gala - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "mpc83xx.h" - -#ifndef CONFIG_PCI -unsigned long isa_io_base = 0; -unsigned long isa_mem_base = 0; -#endif - -#define BCSR5_INT_USB 0x02 -/* Note: This is only for PB, not for PB+PIB - * On PB only port0 is connected using ULPI */ -static int mpc834x_usb_cfg(void) -{ - unsigned long sccr, sicrl; - void __iomem *immap; - void __iomem *bcsr_regs = NULL; - u8 bcsr5; - struct device_node *np = NULL; - int port0_is_dr = 0; - - if ((np = of_find_compatible_node(np, "usb", "fsl-usb2-dr")) != NULL) - port0_is_dr = 1; - if ((np = of_find_compatible_node(np, "usb", "fsl-usb2-mph")) != NULL){ - if (port0_is_dr) { - printk(KERN_WARNING - "There is only one USB port on PB board! \n"); - return -1; - } else if (!port0_is_dr) - /* No usb port enabled */ - return -1; - } - - immap = ioremap(get_immrbase(), 0x1000); - if (!immap) - return -1; - - /* Configure clock */ - sccr = in_be32(immap + MPC83XX_SCCR_OFFS); - if (port0_is_dr) - sccr |= MPC83XX_SCCR_USB_DRCM_11; /* 1:3 */ - else - sccr |= MPC83XX_SCCR_USB_MPHCM_11; /* 1:3 */ - out_be32(immap + MPC83XX_SCCR_OFFS, sccr); - - /* Configure Pin */ - sicrl = in_be32(immap + MPC83XX_SICRL_OFFS); - /* set port0 only */ - if (port0_is_dr) - sicrl |= MPC83XX_SICRL_USB0; - else - sicrl &= ~(MPC83XX_SICRL_USB0); - out_be32(immap + MPC83XX_SICRL_OFFS, sicrl); - - iounmap(immap); - - /* Map BCSR area */ - np = of_find_node_by_name(NULL, "bcsr"); - if (np != 0) { - struct resource res; - - of_address_to_resource(np, 0, &res); - bcsr_regs = ioremap(res.start, res.end - res.start + 1); - of_node_put(np); - } - if (!bcsr_regs) - return -1; - - /* - * if SYS board is plug into PIB board, - * force to use the PHY on SYS board - */ - bcsr5 = in_8(bcsr_regs + 5); - if (!(bcsr5 & BCSR5_INT_USB)) - out_8(bcsr_regs + 5, (bcsr5 | BCSR5_INT_USB)); - iounmap(bcsr_regs); - return 0; -} - -/* ************************************************************************ - * - * Setup the architecture - * - */ -static void __init mpc834x_sys_setup_arch(void) -{ - struct device_node *np; - - if (ppc_md.progress) - ppc_md.progress("mpc834x_sys_setup_arch()", 0); - - np = of_find_node_by_type(NULL, "cpu"); - if (np != 0) { - const unsigned int *fp = - get_property(np, "clock-frequency", NULL); - if (fp != 0) - loops_per_jiffy = *fp / HZ; - else - loops_per_jiffy = 50000000 / HZ; - of_node_put(np); - } - -#ifdef CONFIG_PCI - for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) - add_bridge(np); - - ppc_md.pci_exclude_device = mpc83xx_exclude_device; -#endif - - mpc834x_usb_cfg(); - -#ifdef CONFIG_ROOT_NFS - ROOT_DEV = Root_NFS; -#else - ROOT_DEV = Root_HDA1; -#endif -} - -static void __init mpc834x_sys_init_IRQ(void) -{ - struct device_node *np; - - np = of_find_node_by_type(NULL, "ipic"); - if (!np) - return; - - ipic_init(np, 0); - - /* Initialize the default interrupt mapping priorities, - * in case the boot rom changed something on us. - */ - ipic_set_default_priority(); -} - -#if defined(CONFIG_I2C_MPC) && defined(CONFIG_SENSORS_DS1374) -extern ulong ds1374_get_rtc_time(void); -extern int ds1374_set_rtc_time(ulong); - -static int __init mpc834x_rtc_hookup(void) -{ - struct timespec tv; - - ppc_md.get_rtc_time = ds1374_get_rtc_time; - ppc_md.set_rtc_time = ds1374_set_rtc_time; - - tv.tv_nsec = 0; - tv.tv_sec = (ppc_md.get_rtc_time) (); - do_settimeofday(&tv); - - return 0; -} - -late_initcall(mpc834x_rtc_hookup); -#endif - -/* - * Called very early, MMU is off, device-tree isn't unflattened - */ -static int __init mpc834x_sys_probe(void) -{ - /* We always match for now, eventually we should look at the flat - dev tree to ensure this is the board we are suppose to run on - */ - return 1; -} - -define_machine(mpc834x_sys) { - .name = "MPC834x SYS", - .probe = mpc834x_sys_probe, - .setup_arch = mpc834x_sys_setup_arch, - .init_IRQ = mpc834x_sys_init_IRQ, - .get_irq = ipic_get_irq, - .restart = mpc83xx_restart, - .time_init = mpc83xx_time_init, - .calibrate_decr = generic_calibrate_decr, - .progress = udbg_progress, -}; diff --git a/arch/powerpc/platforms/83xx/mpc834x_sys.h b/arch/powerpc/platforms/83xx/mpc834x_sys.h deleted file mode 100644 index 7d5bbef084e7..000000000000 --- a/arch/powerpc/platforms/83xx/mpc834x_sys.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * arch/powerpc/platforms/83xx/mpc834x_sys.h - * - * MPC834X SYS common board definitions - * - * Maintainer: Kumar Gala - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#ifndef __MACH_MPC83XX_SYS_H__ -#define __MACH_MPC83XX_SYS_H__ - -#define PIRQA MPC83xx_IRQ_EXT4 -#define PIRQB MPC83xx_IRQ_EXT5 -#define PIRQC MPC83xx_IRQ_EXT6 -#define PIRQD MPC83xx_IRQ_EXT7 - -#endif /* __MACH_MPC83XX_SYS_H__ */ -- cgit v1.2.3 From 8500adc79b15fa85b403dbf04aba3497c1f80e50 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Sun, 28 Jan 2007 23:31:08 +0100 Subject: [POWERPC] Update to linkstation / kurobox support Linkstation systems capable of running mainline kernels use u-boot as a bootloader, so, specifying a suitable kernel command is not a problem. Don't guess. Also extend linkstation_defconfig to support the linkstation HS model with a IT8212 IDE controller and kuroboxHD/HD-HLAN linkstation models with a tulip ethernet chip. The latter also require a slightly different .dts file, which is also included with this patch. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/kuroboxHD.dts | 148 +++++++++++++++++++++++ arch/powerpc/configs/linkstation_defconfig | 118 ++++++++++++------ arch/powerpc/platforms/embedded6xx/linkstation.c | 12 -- 3 files changed, 226 insertions(+), 52 deletions(-) create mode 100644 arch/powerpc/boot/dts/kuroboxHD.dts (limited to 'arch') diff --git a/arch/powerpc/boot/dts/kuroboxHD.dts b/arch/powerpc/boot/dts/kuroboxHD.dts new file mode 100644 index 000000000000..096e94ac415f --- /dev/null +++ b/arch/powerpc/boot/dts/kuroboxHD.dts @@ -0,0 +1,148 @@ +/* + * Device Tree Souce for Buffalo KuroboxHD + * + * Choose CONFIG_LINKSTATION to build a kernel for KuroboxHD, or use + * the default configuration linkstation_defconfig. + * + * Based on sandpoint.dts + * + * 2006 (c) G. Liakhovetski + * + * This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + +XXXX add flash parts, rtc, ?? + +build with: "dtc -f -I dts -O dtb -o kuroboxHD.dtb -V 16 kuroboxHD.dts" + + + */ + +/ { + linux,phandle = <1000>; + model = "KuroboxHD"; + compatible = "linkstation"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + linux,phandle = <2000>; + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,603e { /* Really 8241 */ + linux,phandle = <2100>; + linux,boot-cpu; + device_type = "cpu"; + reg = <0>; + clock-frequency = ; /* Fixed by bootwrapper */ + timebase-frequency = <1743000>; /* Fixed by bootwrapper */ + bus-frequency = <0>; /* From bootloader */ + /* Following required by dtc but not used */ + i-cache-line-size = <0>; + d-cache-line-size = <0>; + i-cache-size = <4000>; + d-cache-size = <4000>; + }; + }; + + memory { + linux,phandle = <3000>; + device_type = "memory"; + reg = <00000000 04000000>; + }; + + soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */ + linux,phandle = <4000>; + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + compatible = "mpc10x"; + store-gathering = <0>; /* 0 == off, !0 == on */ + reg = <80000000 00100000>; + ranges = <80000000 80000000 70000000 /* pci mem space */ + fc000000 fc000000 00100000 /* EUMB */ + fe000000 fe000000 00c00000 /* pci i/o space */ + fec00000 fec00000 00300000 /* pci cfg regs */ + fef00000 fef00000 00100000>; /* pci iack */ + + i2c@80003000 { + linux,phandle = <4300>; + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <80003000 1000>; + interrupts = <5 2>; + interrupt-parent = <4400>; + }; + + serial@80004500 { + linux,phandle = <4511>; + device_type = "serial"; + compatible = "ns16550"; + reg = <80004500 8>; + clock-frequency = <5d08d88>; + current-speed = <2580>; + interrupts = <9 2>; + interrupt-parent = <4400>; + }; + + serial@80004600 { + linux,phandle = <4512>; + device_type = "serial"; + compatible = "ns16550"; + reg = <80004600 8>; + clock-frequency = <5d08d88>; + current-speed = ; + interrupts = ; + interrupt-parent = <4400>; + }; + + pic@80040000 { + linux,phandle = <4400>; + #interrupt-cells = <2>; + #address-cells = <0>; + device_type = "open-pic"; + compatible = "chrp,open-pic"; + interrupt-controller; + reg = <80040000 40000>; + built-in; + }; + + pci@fec00000 { + linux,phandle = <4500>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "mpc10x-pci"; + reg = ; + ranges = <01000000 0 0 fe000000 0 00c00000 + 02000000 0 80000000 80000000 0 70000000>; + bus-range = <0 ff>; + clock-frequency = <7f28155>; + interrupt-parent = <4400>; + interrupt-map-mask = ; + interrupt-map = < + /* IDSEL 0x11 - IRQ0 ETH */ + 5800 0 0 1 4400 0 1 + 5800 0 0 2 4400 1 1 + 5800 0 0 3 4400 2 1 + 5800 0 0 4 4400 3 1 + /* IDSEL 0x12 - IRQ1 IDE0 */ + 6000 0 0 1 4400 1 1 + 6000 0 0 2 4400 2 1 + 6000 0 0 3 4400 3 1 + 6000 0 0 4 4400 0 1 + /* IDSEL 0x14 - IRQ3 USB2.0 */ + 7000 0 0 1 4400 3 1 + 7000 0 0 2 4400 3 1 + 7000 0 0 3 4400 3 1 + 7000 0 0 4 4400 3 1 + >; + }; + }; +}; diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig index 405c1c908213..dde66a597a8d 100644 --- a/arch/powerpc/configs/linkstation_defconfig +++ b/arch/powerpc/configs/linkstation_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20-rc5 -# Mon Jan 22 22:17:58 2007 +# Linux kernel version: 2.6.20-rc6 +# Sun Jan 28 23:13:56 2007 # # CONFIG_PPC64 is not set CONFIG_PPC32=y @@ -58,7 +58,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # -CONFIG_LOCALVERSION="-kuroboxHG" +CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y @@ -206,7 +206,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set -# CONFIG_SECCOMP is not set +CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y # @@ -312,39 +312,40 @@ CONFIG_NF_CONNTRACK=m # CONFIG_NF_CT_ACCT is not set # CONFIG_NF_CONNTRACK_MARK is not set # CONFIG_NF_CONNTRACK_EVENTS is not set -# CONFIG_NF_CT_PROTO_SCTP is not set -# CONFIG_NF_CONNTRACK_AMANDA is not set +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CONNTRACK_AMANDA=m CONFIG_NF_CONNTRACK_FTP=m -# CONFIG_NF_CONNTRACK_H323 is not set +CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m -# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set -# CONFIG_NF_CONNTRACK_PPTP is not set -# CONFIG_NF_CONNTRACK_SIP is not set +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m CONFIG_NETFILTER_XTABLES=m -CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set # CONFIG_NETFILTER_XT_TARGET_DSCP is not set -CONFIG_NETFILTER_XT_TARGET_MARK=m +# CONFIG_NETFILTER_XT_TARGET_MARK is not set # CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set -CONFIG_NETFILTER_XT_TARGET_NFLOG=m +# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set # CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set # CONFIG_NETFILTER_XT_MATCH_COMMENT is not set -CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set # CONFIG_NETFILTER_XT_MATCH_DCCP is not set # CONFIG_NETFILTER_XT_MATCH_DSCP is not set -CONFIG_NETFILTER_XT_MATCH_ESP=m -CONFIG_NETFILTER_XT_MATCH_HELPER=m -CONFIG_NETFILTER_XT_MATCH_LENGTH=m -CONFIG_NETFILTER_XT_MATCH_LIMIT=m +# CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_HELPER is not set +# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set +# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set CONFIG_NETFILTER_XT_MATCH_MAC=m -CONFIG_NETFILTER_XT_MATCH_MARK=m +# CONFIG_NETFILTER_XT_MATCH_MARK is not set # CONFIG_NETFILTER_XT_MATCH_POLICY is not set -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set # CONFIG_NETFILTER_XT_MATCH_REALM is not set # CONFIG_NETFILTER_XT_MATCH_SCTP is not set -# CONFIG_NETFILTER_XT_MATCH_STATE is not set +CONFIG_NETFILTER_XT_MATCH_STATE=m # CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set # CONFIG_NETFILTER_XT_MATCH_STRING is not set # CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set @@ -359,12 +360,12 @@ CONFIG_NF_CONNTRACK_PROC_COMPAT=y CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_IPRANGE=m # CONFIG_IP_NF_MATCH_TOS is not set -# CONFIG_IP_NF_MATCH_RECENT is not set +CONFIG_IP_NF_MATCH_RECENT=m # CONFIG_IP_NF_MATCH_ECN is not set # CONFIG_IP_NF_MATCH_AH is not set # CONFIG_IP_NF_MATCH_TTL is not set -# CONFIG_IP_NF_MATCH_OWNER is not set -# CONFIG_IP_NF_MATCH_ADDRTYPE is not set +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m # CONFIG_IP_NF_TARGET_LOG is not set @@ -374,16 +375,17 @@ CONFIG_NF_NAT=m CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m +# CONFIG_IP_NF_TARGET_NETMAP is not set +# CONFIG_IP_NF_TARGET_SAME is not set # CONFIG_NF_NAT_SNMP_BASIC is not set +CONFIG_NF_NAT_PROTO_GRE=m CONFIG_NF_NAT_FTP=m CONFIG_NF_NAT_IRC=m CONFIG_NF_NAT_TFTP=m -# CONFIG_NF_NAT_AMANDA is not set -# CONFIG_NF_NAT_PPTP is not set -# CONFIG_NF_NAT_H323 is not set -# CONFIG_NF_NAT_SIP is not set +CONFIG_NF_NAT_AMANDA=m +CONFIG_NF_NAT_PPTP=m +CONFIG_NF_NAT_H323=m +CONFIG_NF_NAT_SIP=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m @@ -472,6 +474,7 @@ CONFIG_MTD_PARTITIONS=y # User Modules And Translation Layers # CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set @@ -518,6 +521,7 @@ CONFIG_MTD_PHYSMAP=y CONFIG_MTD_PHYSMAP_START=0xffc00000 CONFIG_MTD_PHYSMAP_LEN=0x400000 CONFIG_MTD_PHYSMAP_BANKWIDTH=1 +# CONFIG_MTD_PHYSMAP_OF is not set # CONFIG_MTD_PLATRAM is not set # @@ -540,6 +544,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1 # NAND Flash Device Drivers # # CONFIG_MTD_NAND is not set +# CONFIG_MTD_NAND_CAFE is not set # # OneNAND Flash Device Drivers @@ -696,7 +701,7 @@ CONFIG_ATA=y # CONFIG_PATA_HPT37X is not set # CONFIG_PATA_HPT3X2N is not set # CONFIG_PATA_HPT3X3 is not set -# CONFIG_PATA_IT821X is not set +CONFIG_PATA_IT821X=y # CONFIG_PATA_JMICRON is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_MARVELL is not set @@ -763,11 +768,33 @@ CONFIG_TUN=m # # PHY device support # +# CONFIG_PHYLIB is not set # # Ethernet (10 or 100Mbit) # -# CONFIG_NET_ETHERNET is not set +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +CONFIG_NET_TULIP=y +# CONFIG_DE2104X is not set +CONFIG_TULIP=y +# CONFIG_TULIP_MWI is not set +CONFIG_TULIP_MMIO=y +# CONFIG_TULIP_NAPI is not set +# CONFIG_DE4X5 is not set +# CONFIG_WINBOND_840 is not set +# CONFIG_DM9102 is not set +# CONFIG_ULI526X is not set +# CONFIG_HP100 is not set +# CONFIG_NET_PCI is not set # # Ethernet (1000 Mbit) @@ -829,7 +856,8 @@ CONFIG_NET_RADIO=y # CONFIG_USB_ZD1201 is not set # CONFIG_HOSTAP is not set # CONFIG_BCM43XX is not set -# CONFIG_ZD1211RW is not set +CONFIG_ZD1211RW=m +# CONFIG_ZD1211RW_DEBUG is not set CONFIG_NET_WIRELESS=y # @@ -1098,7 +1126,7 @@ CONFIG_DUMMY_CONSOLE=y # # HID Devices # -CONFIG_HID=y +CONFIG_HID=m # # USB support @@ -1115,7 +1143,6 @@ CONFIG_USB=y CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_MULTITHREAD_PROBE is not set # CONFIG_USB_OTG is not set # @@ -1136,7 +1163,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # USB Device Class drivers # # CONFIG_USB_ACM is not set -# CONFIG_USB_PRINTER is not set +CONFIG_USB_PRINTER=m # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1371,7 +1398,11 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y -# CONFIG_XFS_FS is not set +CONFIG_XFS_FS=m +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_SECURITY is not set +# CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set @@ -1461,7 +1492,12 @@ CONFIG_SUNRPC_GSS=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -1495,7 +1531,7 @@ CONFIG_NLS_CODEPAGE_437=m # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set +CONFIG_NLS_CODEPAGE_932=m # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set @@ -1526,12 +1562,14 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y -# CONFIG_CRC_CCITT is not set +CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m CONFIG_PLIST=y CONFIG_IOMAP_COPY=y diff --git a/arch/powerpc/platforms/embedded6xx/linkstation.c b/arch/powerpc/platforms/embedded6xx/linkstation.c index 61599d919ea8..3f6c4114f908 100644 --- a/arch/powerpc/platforms/embedded6xx/linkstation.c +++ b/arch/powerpc/platforms/embedded6xx/linkstation.c @@ -13,7 +13,6 @@ #include #include #include -#include #include #include @@ -91,17 +90,6 @@ static void __init linkstation_setup_arch(void) ARRAY_SIZE(linkstation_physmap_partitions)); #endif -#ifdef CONFIG_BLK_DEV_INITRD - if (initrd_start) - ROOT_DEV = Root_RAM0; - else -#endif -#ifdef CONFIG_ROOT_NFS - ROOT_DEV = Root_NFS; -#else - ROOT_DEV = Root_HDA1; -#endif - /* Lookup PCI host bridges */ for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) add_bridge(np); -- cgit v1.2.3 From 1f95e49aae68794c4dc0d92fea8b4967dd49ae53 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Wed, 7 Feb 2007 11:35:29 +1000 Subject: [PATCH] m68knommu: remove regs arg from coldfire timer interrupt Fix coldfire kernel timer to remove regs arg. Signed-off-by: Greg Ungerer Signed-off-by: Linus Torvalds --- arch/m68knommu/kernel/time.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/m68knommu/kernel/time.c b/arch/m68knommu/kernel/time.c index 9226264abf1a..11ea217ed5cf 100644 --- a/arch/m68knommu/kernel/time.c +++ b/arch/m68knommu/kernel/time.c @@ -23,6 +23,7 @@ #include #include +#include #define TICK_SIZE (tick_nsec / 1000) @@ -38,7 +39,7 @@ static inline int set_rtc_mmss(unsigned long nowtime) * timer_interrupt() needs to keep up the real-time clock, * as well as call the "do_timer()" routine every clocktick */ -static irqreturn_t timer_interrupt(int irq, void *dummy, struct pt_regs * regs) +static irqreturn_t timer_interrupt(int irq, void *dummy) { /* last time the cmos clock got updated */ static long last_rtc_update=0; @@ -51,7 +52,7 @@ static irqreturn_t timer_interrupt(int irq, void *dummy, struct pt_regs * regs) do_timer(1); #ifndef CONFIG_SMP - update_process_times(user_mode(regs)); + update_process_times(user_mode(get_irq_regs())); #endif if (current->pid) profile_tick(CPU_PROFILING); -- cgit v1.2.3 From 56591b9961f7fb78c88354e59af7f0800f39dded Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Wed, 7 Feb 2007 11:45:43 +1000 Subject: [PATCH] m68knommu: include unused sections in linker script Include the unused sections in the m68knommu linker scripts. Needed for modules support. Signed-off-by: Greg Ungerer Signed-off-by: Linus Torvalds --- arch/m68knommu/kernel/vmlinux.lds.S | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch') diff --git a/arch/m68knommu/kernel/vmlinux.lds.S b/arch/m68knommu/kernel/vmlinux.lds.S index 2b2a10da64a4..bfade20a9e5e 100644 --- a/arch/m68knommu/kernel/vmlinux.lds.S +++ b/arch/m68knommu/kernel/vmlinux.lds.S @@ -87,6 +87,16 @@ SECTIONS { *(__ksymtab_gpl) __stop___ksymtab_gpl = .; + /* Kernel symbol table: Normal unused symbols */ + __start___ksymtab_unused = .; + *(__ksymtab_unused) + __stop___ksymtab_unused = .; + + /* Kernel symbol table: GPL-only unused symbols */ + __start___ksymtab_unused_gpl = .; + *(__ksymtab_unused_gpl) + __stop___ksymtab_unused_gpl = .; + /* Kernel symbol table: GPL-future symbols */ __start___ksymtab_gpl_future = .; *(__ksymtab_gpl_future) -- cgit v1.2.3 From 459c6a9b8ee931e48f6af6637c10ec45521f0536 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Wed, 7 Feb 2007 12:02:52 +1000 Subject: [PATCH] m68knommu: use irq_handler_t passing handler to PIT init Use irq_handler_t type for passing timer handler to timer init code. Signed-off-by: Greg Ungerer Signed-off-by: Linus Torvalds --- arch/m68knommu/platform/5307/pit.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/m68knommu/platform/5307/pit.c b/arch/m68knommu/platform/5307/pit.c index 9dc5688f71b5..aa15beeb36ca 100644 --- a/arch/m68knommu/platform/5307/pit.c +++ b/arch/m68knommu/platform/5307/pit.c @@ -43,7 +43,7 @@ void coldfire_pit_tick(void) /***************************************************************************/ -void coldfire_pit_init(irqreturn_t (*handler)(int, void *, struct pt_regs *)) +void coldfire_pit_init(irq_handler_t handler) { volatile unsigned char *icrp; volatile unsigned long *imrp; -- cgit v1.2.3 From c051b01129560ea02ea2cebdf00db0721cc9a618 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Wed, 7 Feb 2007 12:03:01 +1000 Subject: [PATCH] m68knommu: use irq_handler_t passing handler to clock init Use irq_handler_t for passing interrupt handler around. Fix optional profiler handler to return a irq_return_t type. Signed-off-by: Greg Ungerer Signed-off-by: Linus Torvalds --- arch/m68knommu/platform/5307/timers.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/m68knommu/platform/5307/timers.c b/arch/m68knommu/platform/5307/timers.c index e5668af19789..87b112b363a6 100644 --- a/arch/m68knommu/platform/5307/timers.c +++ b/arch/m68knommu/platform/5307/timers.c @@ -62,7 +62,7 @@ void coldfire_tick(void) /***************************************************************************/ -void coldfire_timer_init(irqreturn_t (*handler)(int, void *, struct pt_regs *)) +void coldfire_timer_init(irq_handler_t handler) { __raw_writew(MCFTIMER_TMR_DISABLE, TA(MCFTIMER_TMR)); __raw_writetrr(((MCF_BUSCLK / 16) / HZ), TA(MCFTIMER_TRR)); @@ -111,12 +111,13 @@ unsigned long coldfire_timer_offset(void) /* * Use the other timer to provide high accuracy profiling info. */ -void coldfire_profile_tick(int irq, void *dummy, struct pt_regs *regs) +irqreturn_t coldfire_profile_tick(int irq, void *dummy) { /* Reset ColdFire timer2 */ __raw_writeb(MCFTIMER_TER_CAP | MCFTIMER_TER_REF, PA(MCFTIMER_TER)); if (current->pid) profile_tick(CPU_PROFILING, regs); + return IRQ_HANDLED; } /***************************************************************************/ -- cgit v1.2.3 From eaefd5fb7d793c9c1bcef1b0c0d5ec3824a85b91 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Wed, 7 Feb 2007 12:03:19 +1000 Subject: [PATCH] m68knommu: use irq_handler_t for passing handler types Use irq_handler_t for passing clock handler routine around. Signed-off-by: Greg Ungerer Signed-off-by: Linus Torvalds --- arch/m68knommu/platform/5206/config.c | 2 +- arch/m68knommu/platform/5206e/config.c | 2 +- arch/m68knommu/platform/520x/config.c | 3 ++- arch/m68knommu/platform/523x/config.c | 2 +- arch/m68knommu/platform/5249/config.c | 3 ++- arch/m68knommu/platform/5272/config.c | 2 +- arch/m68knommu/platform/527x/config.c | 2 +- arch/m68knommu/platform/528x/config.c | 2 +- arch/m68knommu/platform/5307/config.c | 2 +- arch/m68knommu/platform/532x/config.c | 2 +- arch/m68knommu/platform/5407/config.c | 2 +- arch/m68knommu/platform/68328/config.c | 2 +- 12 files changed, 14 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/m68knommu/platform/5206/config.c b/arch/m68knommu/platform/5206/config.c index 34657f85e702..3343830aad10 100644 --- a/arch/m68knommu/platform/5206/config.c +++ b/arch/m68knommu/platform/5206/config.c @@ -26,7 +26,7 @@ /***************************************************************************/ void coldfire_tick(void); -void coldfire_timer_init(irqreturn_t (*handler)(int, void *, struct pt_regs *)); +void coldfire_timer_init(irq_handler_t handler); unsigned long coldfire_timer_offset(void); void coldfire_trap_init(void); void coldfire_reset(void); diff --git a/arch/m68knommu/platform/5206e/config.c b/arch/m68knommu/platform/5206e/config.c index 48e4d6266507..0f67320b4031 100644 --- a/arch/m68knommu/platform/5206e/config.c +++ b/arch/m68knommu/platform/5206e/config.c @@ -25,7 +25,7 @@ /***************************************************************************/ void coldfire_tick(void); -void coldfire_timer_init(irqreturn_t (*handler)(int, void *, struct pt_regs *)); +void coldfire_timer_init(irq_handler_t handler); unsigned long coldfire_timer_offset(void); void coldfire_trap_init(void); void coldfire_reset(void); diff --git a/arch/m68knommu/platform/520x/config.c b/arch/m68knommu/platform/520x/config.c index 823f561f35b0..58b2878deb61 100644 --- a/arch/m68knommu/platform/520x/config.c +++ b/arch/m68knommu/platform/520x/config.c @@ -13,6 +13,7 @@ #include #include +#include #include #include @@ -27,7 +28,7 @@ unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS]; /***************************************************************************/ void coldfire_pit_tick(void); -void coldfire_pit_init(irqreturn_t (*handler)(int, void *, struct pt_regs *)); +void coldfire_pit_init(irq_handler_t handler); unsigned long coldfire_pit_offset(void); void coldfire_trap_init(void); void coldfire_reset(void); diff --git a/arch/m68knommu/platform/523x/config.c b/arch/m68knommu/platform/523x/config.c index 85de817e9ec5..9b054e6caee2 100644 --- a/arch/m68knommu/platform/523x/config.c +++ b/arch/m68knommu/platform/523x/config.c @@ -27,7 +27,7 @@ /***************************************************************************/ void coldfire_pit_tick(void); -void coldfire_pit_init(irqreturn_t (*handler)(int, void *, struct pt_regs *)); +void coldfire_pit_init(irq_handler_t handler); unsigned long coldfire_pit_offset(void); void coldfire_trap_init(void); void coldfire_reset(void); diff --git a/arch/m68knommu/platform/5249/config.c b/arch/m68knommu/platform/5249/config.c index 9d19d5bdb8af..d6706079d64a 100644 --- a/arch/m68knommu/platform/5249/config.c +++ b/arch/m68knommu/platform/5249/config.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include #include @@ -24,7 +25,7 @@ /***************************************************************************/ void coldfire_tick(void); -void coldfire_timer_init(irqreturn_t (*handler)(int, void *, struct pt_regs *)); +void coldfire_timer_init(irq_handler_t handler); unsigned long coldfire_timer_offset(void); void coldfire_trap_init(void); void coldfire_reset(void); diff --git a/arch/m68knommu/platform/5272/config.c b/arch/m68knommu/platform/5272/config.c index d500e27eda57..6b437cc97776 100644 --- a/arch/m68knommu/platform/5272/config.c +++ b/arch/m68knommu/platform/5272/config.c @@ -26,7 +26,7 @@ /***************************************************************************/ void coldfire_tick(void); -void coldfire_timer_init(irqreturn_t (*handler)(int, void *, struct pt_regs *)); +void coldfire_timer_init(irq_handler_t handler); unsigned long coldfire_timer_offset(void); void coldfire_trap_init(void); void coldfire_reset(void); diff --git a/arch/m68knommu/platform/527x/config.c b/arch/m68knommu/platform/527x/config.c index bbae51597457..28e7d964eef1 100644 --- a/arch/m68knommu/platform/527x/config.c +++ b/arch/m68knommu/platform/527x/config.c @@ -27,7 +27,7 @@ /***************************************************************************/ void coldfire_pit_tick(void); -void coldfire_pit_init(irqreturn_t (*handler)(int, void *, struct pt_regs *)); +void coldfire_pit_init(irq_handler_t handler); unsigned long coldfire_pit_offset(void); void coldfire_trap_init(void); void coldfire_reset(void); diff --git a/arch/m68knommu/platform/528x/config.c b/arch/m68knommu/platform/528x/config.c index 18dad9046144..805b4f74ff19 100644 --- a/arch/m68knommu/platform/528x/config.c +++ b/arch/m68knommu/platform/528x/config.c @@ -27,7 +27,7 @@ /***************************************************************************/ void coldfire_pit_tick(void); -void coldfire_pit_init(irqreturn_t (*handler)(int, void *, struct pt_regs *)); +void coldfire_pit_init(irq_handler_t handler); unsigned long coldfire_pit_offset(void); void coldfire_trap_init(void); void coldfire_reset(void); diff --git a/arch/m68knommu/platform/5307/config.c b/arch/m68knommu/platform/5307/config.c index 8074ac56f479..e04b84deb57d 100644 --- a/arch/m68knommu/platform/5307/config.c +++ b/arch/m68knommu/platform/5307/config.c @@ -27,7 +27,7 @@ /***************************************************************************/ void coldfire_tick(void); -void coldfire_timer_init(irqreturn_t (*handler)(int, void *, struct pt_regs *)); +void coldfire_timer_init(irq_handler_t handler); unsigned long coldfire_timer_offset(void); void coldfire_trap_init(void); void coldfire_reset(void); diff --git a/arch/m68knommu/platform/532x/config.c b/arch/m68knommu/platform/532x/config.c index c7d6ad513820..664c3a12b0c1 100644 --- a/arch/m68knommu/platform/532x/config.c +++ b/arch/m68knommu/platform/532x/config.c @@ -35,7 +35,7 @@ /***************************************************************************/ void coldfire_tick(void); -void coldfire_timer_init(irqreturn_t (*handler)(int, void *, struct pt_regs *)); +void coldfire_timer_init(irq_handler_t handler); unsigned long coldfire_timer_offset(void); void coldfire_trap_init(void); void coldfire_reset(void); diff --git a/arch/m68knommu/platform/5407/config.c b/arch/m68knommu/platform/5407/config.c index 5aad2645f0f1..036f62876241 100644 --- a/arch/m68knommu/platform/5407/config.c +++ b/arch/m68knommu/platform/5407/config.c @@ -26,7 +26,7 @@ /***************************************************************************/ void coldfire_tick(void); -void coldfire_timer_init(irqreturn_t (*handler)(int, void *, struct pt_regs *)); +void coldfire_timer_init(irq_handler_t handler); unsigned long coldfire_timer_offset(void); void coldfire_trap_init(void); void coldfire_reset(void); diff --git a/arch/m68knommu/platform/68328/config.c b/arch/m68knommu/platform/68328/config.c index 26ffeba28642..e5c537d14dfb 100644 --- a/arch/m68knommu/platform/68328/config.c +++ b/arch/m68knommu/platform/68328/config.c @@ -34,7 +34,7 @@ /***************************************************************************/ -void m68328_timer_init(irqreturn_t (*timer_routine) (int, void *, struct pt_regs *)); +void m68328_timer_init(irq_handler_t timer_routine); void m68328_timer_tick(void); unsigned long m68328_timer_gettimeoffset(void); void m68328_timer_gettod(int *year, int *mon, int *day, int *hour, int *min, int *sec); -- cgit v1.2.3 From 27a3bbaf4b1e23a3afbae4d9f72b51a36859f74a Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 7 Feb 2007 13:48:59 +0000 Subject: [MIPS] VPE: Sprinkle device model code into code to make udev happier. Signed-off-by: Ralf Baechle --- arch/mips/kernel/mips-mt.c | 19 +++++++++++++++++++ arch/mips/kernel/vpe.c | 22 +++++++++++++++++++++- 2 files changed, 40 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/kernel/mips-mt.c b/arch/mips/kernel/mips-mt.c index a32f6797353a..ba01800b6018 100644 --- a/arch/mips/kernel/mips-mt.c +++ b/arch/mips/kernel/mips-mt.c @@ -3,9 +3,11 @@ * Copyright (C) 2005 Mips Technologies, Inc */ +#include #include #include #include +#include #include #include @@ -453,3 +455,20 @@ void mt_cflush_release(void) #endif /* CONFIG_MIPS_MT_SMTC */ /* FILL IN VSMP and AP/SP VERSIONS HERE */ } + +struct class *mt_class; + +static int __init mt_init(void) +{ + struct class *mtc; + + mtc = class_create(THIS_MODULE, "mt"); + if (IS_ERR(mtc)) + return PTR_ERR(mtc); + + mt_class = mtc; + + return 0; +} + +subsys_initcall(mt_init); diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c index 459624969c99..4e832da48c69 100644 --- a/arch/mips/kernel/vpe.c +++ b/arch/mips/kernel/vpe.c @@ -29,6 +29,7 @@ */ #include +#include #include #include #include @@ -48,6 +49,7 @@ #include #include #include +#include #include #include #include @@ -64,6 +66,7 @@ typedef void *vpe_handle; static char module_name[] = "vpe"; static int major; +static const int minor = 1; /* fixed for now */ #ifdef CONFIG_MIPS_APSP_KSPD static struct kspd_notifications kspd_events; @@ -1365,12 +1368,15 @@ static void kspd_sp_exit( int sp_id) } #endif +static struct device *vpe_dev; + static int __init vpe_module_init(void) { struct vpe *v = NULL; + struct device *dev; struct tc *t; unsigned long val; - int i; + int i, err; if (!cpu_has_mipsmt) { printk("VPE loader: not a MIPS MT capable processor\n"); @@ -1383,6 +1389,14 @@ static int __init vpe_module_init(void) return major; } + dev = device_create(mt_class, NULL, MKDEV(major, minor), + "tc%d", minor); + if (IS_ERR(dev)) { + err = PTR_ERR(dev); + goto out_chrdev; + } + vpe_dev = dev; + dmt(); dvpe(); @@ -1478,6 +1492,11 @@ static int __init vpe_module_init(void) kspd_events.kspd_sp_exit = kspd_sp_exit; #endif return 0; + +out_chrdev: + unregister_chrdev(major, module_name); + + return err; } static void __exit vpe_module_exit(void) @@ -1490,6 +1509,7 @@ static void __exit vpe_module_exit(void) } } + device_destroy(mt_class, MKDEV(major, minor)); unregister_chrdev(major, module_name); } -- cgit v1.2.3 From bb3d7c7ff1cc18b4cb83820327905f7e1f8dc414 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 7 Feb 2007 15:36:56 +0000 Subject: [MIPS] RTLX: Sprinkle device model code into code to make udev happier. Signed-off-by: Ralf Baechle --- arch/mips/kernel/rtlx.c | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c index 8610f4a925e9..f29e93c6ccfc 100644 --- a/arch/mips/kernel/rtlx.c +++ b/arch/mips/kernel/rtlx.c @@ -17,6 +17,7 @@ * */ +#include #include #include #include @@ -34,6 +35,7 @@ #include #include #include +#include #include #include #include @@ -498,7 +500,8 @@ static char register_chrdev_failed[] __initdata = static int rtlx_module_init(void) { - int i; + struct device *dev; + int i, err; major = register_chrdev(0, module_name, &rtlx_fops); if (major < 0) { @@ -511,6 +514,13 @@ static int rtlx_module_init(void) init_waitqueue_head(&channel_wqs[i].rt_queue); init_waitqueue_head(&channel_wqs[i].lx_queue); channel_wqs[i].in_open = 0; + + dev = device_create(mt_class, NULL, MKDEV(major, i), + "%s%d", module_name, i); + if (IS_ERR(dev)) { + err = PTR_ERR(dev); + goto out_chrdev; + } } /* set up notifiers */ @@ -525,10 +535,21 @@ static int rtlx_module_init(void) setup_irq(rtlx_irq_num, &rtlx_irq); return 0; + +out_chrdev: + for (i = 0; i < RTLX_CHANNELS; i++) + device_destroy(mt_class, MKDEV(major, i)); + + return err; } static void __exit rtlx_module_exit(void) { + int i; + + for (i = 0; i < RTLX_CHANNELS; i++) + device_destroy(mt_class, MKDEV(major, i)); + unregister_chrdev(major, module_name); } -- cgit v1.2.3 From 57340b2bad1de489902f6947f24fc334737e5b80 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 7 Feb 2007 20:41:36 +0300 Subject: [MIPS] RBTX49x7: declare prom_getcmdline() Fix a bunch of warnings caused by a missing prom_getcmdline() prototype. Signed-off-by: Sergei Shtylyov Signed-off-by: Ralf Baechle --- arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c index 735cb8778f4c..7316a78fdd68 100644 --- a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c +++ b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c @@ -137,6 +137,8 @@ int tx4927_using_backplane = 0; extern void gt64120_time_init(void); extern void toshiba_rbtx4927_irq_setup(void); +char *prom_getcmdline(void); + #ifdef CONFIG_PCI #define CONFIG_TX4927BUG_WORKAROUND #undef TX4927_SUPPORT_COMMAND_IO -- cgit v1.2.3 From 6a2603a2eaafc5faaae24f7250158a41931f77ee Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 7 Feb 2007 20:39:05 +0300 Subject: [MIPS] JMR3927 and RBTX49x7 support little endian Toshiba JMR3927 (RBHMA3100) and RBTX49[23]7 (RBHMA4[24]00) do support both little and big endian mode (if you flash the right PMON). Signed-off-by: Sergei Shtylyov Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 9d839a9c4b1a..b00a84b6e09d 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -753,6 +753,7 @@ config TOSHIBA_JMR3927 select SWAP_IO_SPACE select SYS_HAS_CPU_TX39XX select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_SUPPORTS_BIG_ENDIAN select TOSHIBA_BOARDS @@ -767,6 +768,7 @@ config TOSHIBA_RBTX4927 select SYS_HAS_CPU_TX49XX select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_SUPPORTS_BIG_ENDIAN select TOSHIBA_BOARDS select GENERIC_HARDIRQS_NO__DO_IRQ -- cgit v1.2.3 From 761fc19bdbe33ea8b7b88b88c7ca149a57a9e6b6 Mon Sep 17 00:00:00 2001 From: Dale Farnsworth Date: Fri, 9 Feb 2007 13:31:43 -0700 Subject: [MIPS] Fix eth2 platform device id for jaguar_atx and ocelot_3 platforms Signed-off-by: Dale Farnsowrth Signed-off-by: Ralf Baechle --- arch/mips/momentum/jaguar_atx/platform.c | 2 +- arch/mips/momentum/ocelot_3/platform.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/mips/momentum/jaguar_atx/platform.c b/arch/mips/momentum/jaguar_atx/platform.c index 035ea5137c71..81037709ba0d 100644 --- a/arch/mips/momentum/jaguar_atx/platform.c +++ b/arch/mips/momentum/jaguar_atx/platform.c @@ -129,7 +129,7 @@ static struct mv643xx_eth_platform_data eth2_pd = { static struct platform_device eth2_device = { .name = MV643XX_ETH_NAME, - .id = 1, + .id = 2, .num_resources = ARRAY_SIZE(mv64x60_eth2_resources), .resource = mv64x60_eth2_resources, .dev = { diff --git a/arch/mips/momentum/ocelot_3/platform.c b/arch/mips/momentum/ocelot_3/platform.c index eefe5841fbb2..57cfe5c6e4a8 100644 --- a/arch/mips/momentum/ocelot_3/platform.c +++ b/arch/mips/momentum/ocelot_3/platform.c @@ -129,7 +129,7 @@ static struct mv643xx_eth_platform_data eth2_pd = { static struct platform_device eth2_device = { .name = MV643XX_ETH_NAME, - .id = 1, + .id = 2, .num_resources = ARRAY_SIZE(mv64x60_eth2_resources), .resource = mv64x60_eth2_resources, .dev = { -- cgit v1.2.3 From a007b1f1c764c08896bc574fbd33e19ce898a188 Mon Sep 17 00:00:00 2001 From: Franck Bui-Huu Date: Mon, 5 Feb 2007 15:24:19 +0100 Subject: [MIPS] signals: reduce {setup,restore}_sigcontext sizes This trivial change reduces considerably code size of these 2 functions callers. For instance, here is the figures for arch/kernel/signal.o objects: text data bss dec hex filename 11972 0 0 11972 2ec4 arch/mips/kernel/signal.o~old 5380 0 0 5380 1504 arch/mips/kernel/signal.o~new Signed-off-by: Franck Bui-Huu Signed-off-by: Ralf Baechle --- arch/mips/kernel/signal-common.h | 66 +++++++++++++--------------------------- 1 file changed, 21 insertions(+), 45 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/signal-common.h b/arch/mips/kernel/signal-common.h index b1f09d54ebe6..bb3c631b808e 100644 --- a/arch/mips/kernel/signal-common.h +++ b/arch/mips/kernel/signal-common.h @@ -13,22 +13,13 @@ static inline int setup_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc) { int err = 0; + int i; err |= __put_user(regs->cp0_epc, &sc->sc_pc); -#define save_gp_reg(i) do { \ - err |= __put_user(regs->regs[i], &sc->sc_regs[i]); \ -} while(0) - __put_user(0, &sc->sc_regs[0]); save_gp_reg(1); save_gp_reg(2); - save_gp_reg(3); save_gp_reg(4); save_gp_reg(5); save_gp_reg(6); - save_gp_reg(7); save_gp_reg(8); save_gp_reg(9); save_gp_reg(10); - save_gp_reg(11); save_gp_reg(12); save_gp_reg(13); save_gp_reg(14); - save_gp_reg(15); save_gp_reg(16); save_gp_reg(17); save_gp_reg(18); - save_gp_reg(19); save_gp_reg(20); save_gp_reg(21); save_gp_reg(22); - save_gp_reg(23); save_gp_reg(24); save_gp_reg(25); save_gp_reg(26); - save_gp_reg(27); save_gp_reg(28); save_gp_reg(29); save_gp_reg(30); - save_gp_reg(31); -#undef save_gp_reg + err |= __put_user(0, &sc->sc_regs[0]); + for (i = 1; i < 32; i++) + err |= __put_user(regs->regs[i], &sc->sc_regs[i]); err |= __put_user(regs->hi, &sc->sc_mdhi); err |= __put_user(regs->lo, &sc->sc_mdlo); @@ -44,24 +35,21 @@ setup_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc) err |= __put_user(!!used_math(), &sc->sc_used_math); - if (!used_math()) - goto out; - - /* - * Save FPU state to signal context. Signal handler will "inherit" - * current FPU state. - */ - preempt_disable(); - - if (!is_fpu_owner()) { - own_fpu(); - restore_fp(current); + if (used_math()) { + /* + * Save FPU state to signal context. Signal handler + * will "inherit" current FPU state. + */ + preempt_disable(); + + if (!is_fpu_owner()) { + own_fpu(); + restore_fp(current); + } + err |= save_fp_context(sc); + + preempt_enable(); } - err |= save_fp_context(sc); - - preempt_enable(); - -out: return err; } @@ -71,6 +59,7 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc) unsigned int used_math; unsigned long treg; int err = 0; + int i; /* Always make any pending restarted system calls return -EINTR */ current_thread_info()->restart_block.fn = do_no_restart_syscall; @@ -88,21 +77,8 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc) err |= __get_user(treg, &sc->sc_dsp); wrdsp(treg, DSP_MASK); } -#define restore_gp_reg(i) do { \ - err |= __get_user(regs->regs[i], &sc->sc_regs[i]); \ -} while(0) - restore_gp_reg( 1); restore_gp_reg( 2); restore_gp_reg( 3); - restore_gp_reg( 4); restore_gp_reg( 5); restore_gp_reg( 6); - restore_gp_reg( 7); restore_gp_reg( 8); restore_gp_reg( 9); - restore_gp_reg(10); restore_gp_reg(11); restore_gp_reg(12); - restore_gp_reg(13); restore_gp_reg(14); restore_gp_reg(15); - restore_gp_reg(16); restore_gp_reg(17); restore_gp_reg(18); - restore_gp_reg(19); restore_gp_reg(20); restore_gp_reg(21); - restore_gp_reg(22); restore_gp_reg(23); restore_gp_reg(24); - restore_gp_reg(25); restore_gp_reg(26); restore_gp_reg(27); - restore_gp_reg(28); restore_gp_reg(29); restore_gp_reg(30); - restore_gp_reg(31); -#undef restore_gp_reg + for (i = 1; i < 32; i++) + err |= __get_user(regs->regs[i], &sc->sc_regs[i]); err |= __get_user(used_math, &sc->sc_used_math); conditional_used_math(used_math); -- cgit v1.2.3 From c3fc4ab36d495f50ccc89986fe32eeabc2549fa1 Mon Sep 17 00:00:00 2001 From: Franck Bui-Huu Date: Mon, 5 Feb 2007 15:24:20 +0100 Subject: [MIPS] signal: do not inline functions in signal-common.h These functions are quite big and there are no points to make them inlined. So this patch moves the functions implementation in signal.c and make them available for others source files which need them. Signed-off-by: Franck Bui-Huu Signed-off-by: Ralf Baechle --- arch/mips/kernel/signal-common.h | 150 ++++----------------------------------- arch/mips/kernel/signal.c | 139 ++++++++++++++++++++++++++++++++++++ 2 files changed, 153 insertions(+), 136 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/signal-common.h b/arch/mips/kernel/signal-common.h index bb3c631b808e..03d2b603fb84 100644 --- a/arch/mips/kernel/signal-common.h +++ b/arch/mips/kernel/signal-common.h @@ -8,145 +8,23 @@ * Copyright (C) 1999, 2000 Silicon Graphics, Inc. */ +#ifndef __SIGNAL_COMMON_H +#define __SIGNAL_COMMON_H -static inline int -setup_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc) -{ - int err = 0; - int i; - - err |= __put_user(regs->cp0_epc, &sc->sc_pc); - - err |= __put_user(0, &sc->sc_regs[0]); - for (i = 1; i < 32; i++) - err |= __put_user(regs->regs[i], &sc->sc_regs[i]); - - err |= __put_user(regs->hi, &sc->sc_mdhi); - err |= __put_user(regs->lo, &sc->sc_mdlo); - if (cpu_has_dsp) { - err |= __put_user(mfhi1(), &sc->sc_hi1); - err |= __put_user(mflo1(), &sc->sc_lo1); - err |= __put_user(mfhi2(), &sc->sc_hi2); - err |= __put_user(mflo2(), &sc->sc_lo2); - err |= __put_user(mfhi3(), &sc->sc_hi3); - err |= __put_user(mflo3(), &sc->sc_lo3); - err |= __put_user(rddsp(DSP_MASK), &sc->sc_dsp); - } - - err |= __put_user(!!used_math(), &sc->sc_used_math); - - if (used_math()) { - /* - * Save FPU state to signal context. Signal handler - * will "inherit" current FPU state. - */ - preempt_disable(); - - if (!is_fpu_owner()) { - own_fpu(); - restore_fp(current); - } - err |= save_fp_context(sc); - - preempt_enable(); - } - return err; -} - -static inline int -restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc) -{ - unsigned int used_math; - unsigned long treg; - int err = 0; - int i; - - /* Always make any pending restarted system calls return -EINTR */ - current_thread_info()->restart_block.fn = do_no_restart_syscall; - - err |= __get_user(regs->cp0_epc, &sc->sc_pc); - err |= __get_user(regs->hi, &sc->sc_mdhi); - err |= __get_user(regs->lo, &sc->sc_mdlo); - if (cpu_has_dsp) { - err |= __get_user(treg, &sc->sc_hi1); mthi1(treg); - err |= __get_user(treg, &sc->sc_lo1); mtlo1(treg); - err |= __get_user(treg, &sc->sc_hi2); mthi2(treg); - err |= __get_user(treg, &sc->sc_lo2); mtlo2(treg); - err |= __get_user(treg, &sc->sc_hi3); mthi3(treg); - err |= __get_user(treg, &sc->sc_lo3); mtlo3(treg); - err |= __get_user(treg, &sc->sc_dsp); wrdsp(treg, DSP_MASK); - } - - for (i = 1; i < 32; i++) - err |= __get_user(regs->regs[i], &sc->sc_regs[i]); - - err |= __get_user(used_math, &sc->sc_used_math); - conditional_used_math(used_math); - - preempt_disable(); - - if (used_math()) { - /* restore fpu context if we have used it before */ - own_fpu(); - err |= restore_fp_context(sc); - } else { - /* signal handler may have used FPU. Give it up. */ - lose_fpu(); - } - - preempt_enable(); - - return err; -} +/* + * handle hardware context + */ +extern int setup_sigcontext(struct pt_regs *, struct sigcontext __user *); +extern int restore_sigcontext(struct pt_regs *, struct sigcontext __user *); /* * Determine which stack to use.. */ -static inline void __user * -get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size) -{ - unsigned long sp; - - /* Default to using normal stack */ - sp = regs->regs[29]; - - /* - * FPU emulator may have it's own trampoline active just - * above the user stack, 16-bytes before the next lowest - * 16 byte boundary. Try to avoid trashing it. - */ - sp -= 32; - - /* This is the X/Open sanctioned signal stack switching. */ - if ((ka->sa.sa_flags & SA_ONSTACK) && (sas_ss_flags (sp) == 0)) - sp = current->sas_ss_sp + current->sas_ss_size; - - return (void __user *)((sp - frame_size) & (ICACHE_REFILLS_WORKAROUND_WAR ? ~(cpu_icache_line_size()-1) : ALMASK)); -} - -static inline int install_sigtramp(unsigned int __user *tramp, - unsigned int syscall) -{ - int err; - - /* - * Set up the return code ... - * - * li v0, __NR__foo_sigreturn - * syscall - */ - - err = __put_user(0x24020000 + syscall, tramp + 0); - err |= __put_user(0x0000000c , tramp + 1); - if (ICACHE_REFILLS_WORKAROUND_WAR) { - err |= __put_user(0, tramp + 2); - err |= __put_user(0, tramp + 3); - err |= __put_user(0, tramp + 4); - err |= __put_user(0, tramp + 5); - err |= __put_user(0, tramp + 6); - err |= __put_user(0, tramp + 7); - } - flush_cache_sigtramp((unsigned long) tramp); +extern void __user *get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, + size_t frame_size); +/* + * install trampoline code to get back from the sig handler + */ +extern int install_sigtramp(unsigned int __user *tramp, unsigned int syscall); - return err; -} +#endif /* __SIGNAL_COMMON_H */ diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c index 9a44053cd9f1..7d5a631d6cab 100644 --- a/arch/mips/kernel/signal.c +++ b/arch/mips/kernel/signal.c @@ -38,6 +38,145 @@ #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) +/* + * Helper routines + */ +int setup_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc) +{ + int err = 0; + int i; + + err |= __put_user(regs->cp0_epc, &sc->sc_pc); + + err |= __put_user(0, &sc->sc_regs[0]); + for (i = 1; i < 32; i++) + err |= __put_user(regs->regs[i], &sc->sc_regs[i]); + + err |= __put_user(regs->hi, &sc->sc_mdhi); + err |= __put_user(regs->lo, &sc->sc_mdlo); + if (cpu_has_dsp) { + err |= __put_user(mfhi1(), &sc->sc_hi1); + err |= __put_user(mflo1(), &sc->sc_lo1); + err |= __put_user(mfhi2(), &sc->sc_hi2); + err |= __put_user(mflo2(), &sc->sc_lo2); + err |= __put_user(mfhi3(), &sc->sc_hi3); + err |= __put_user(mflo3(), &sc->sc_lo3); + err |= __put_user(rddsp(DSP_MASK), &sc->sc_dsp); + } + + err |= __put_user(!!used_math(), &sc->sc_used_math); + + if (used_math()) { + /* + * Save FPU state to signal context. Signal handler + * will "inherit" current FPU state. + */ + preempt_disable(); + + if (!is_fpu_owner()) { + own_fpu(); + restore_fp(current); + } + err |= save_fp_context(sc); + + preempt_enable(); + } + return err; +} + +int restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc) +{ + unsigned int used_math; + unsigned long treg; + int err = 0; + int i; + + /* Always make any pending restarted system calls return -EINTR */ + current_thread_info()->restart_block.fn = do_no_restart_syscall; + + err |= __get_user(regs->cp0_epc, &sc->sc_pc); + err |= __get_user(regs->hi, &sc->sc_mdhi); + err |= __get_user(regs->lo, &sc->sc_mdlo); + if (cpu_has_dsp) { + err |= __get_user(treg, &sc->sc_hi1); mthi1(treg); + err |= __get_user(treg, &sc->sc_lo1); mtlo1(treg); + err |= __get_user(treg, &sc->sc_hi2); mthi2(treg); + err |= __get_user(treg, &sc->sc_lo2); mtlo2(treg); + err |= __get_user(treg, &sc->sc_hi3); mthi3(treg); + err |= __get_user(treg, &sc->sc_lo3); mtlo3(treg); + err |= __get_user(treg, &sc->sc_dsp); wrdsp(treg, DSP_MASK); + } + + for (i = 1; i < 32; i++) + err |= __get_user(regs->regs[i], &sc->sc_regs[i]); + + err |= __get_user(used_math, &sc->sc_used_math); + conditional_used_math(used_math); + + preempt_disable(); + + if (used_math()) { + /* restore fpu context if we have used it before */ + own_fpu(); + err |= restore_fp_context(sc); + } else { + /* signal handler may have used FPU. Give it up. */ + lose_fpu(); + } + + preempt_enable(); + + return err; +} + +void __user *get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, + size_t frame_size) +{ + unsigned long sp; + + /* Default to using normal stack */ + sp = regs->regs[29]; + + /* + * FPU emulator may have it's own trampoline active just + * above the user stack, 16-bytes before the next lowest + * 16 byte boundary. Try to avoid trashing it. + */ + sp -= 32; + + /* This is the X/Open sanctioned signal stack switching. */ + if ((ka->sa.sa_flags & SA_ONSTACK) && (sas_ss_flags (sp) == 0)) + sp = current->sas_ss_sp + current->sas_ss_size; + + return (void __user *)((sp - frame_size) & (ICACHE_REFILLS_WORKAROUND_WAR ? ~(cpu_icache_line_size()-1) : ALMASK)); +} + +int install_sigtramp(unsigned int __user *tramp, unsigned int syscall) +{ + int err; + + /* + * Set up the return code ... + * + * li v0, __NR__foo_sigreturn + * syscall + */ + + err = __put_user(0x24020000 + syscall, tramp + 0); + err |= __put_user(0x0000000c , tramp + 1); + if (ICACHE_REFILLS_WORKAROUND_WAR) { + err |= __put_user(0, tramp + 2); + err |= __put_user(0, tramp + 3); + err |= __put_user(0, tramp + 4); + err |= __put_user(0, tramp + 5); + err |= __put_user(0, tramp + 6); + err |= __put_user(0, tramp + 7); + } + flush_cache_sigtramp((unsigned long) tramp); + + return err; +} + /* * Atomically swap in the new signal mask, and wait for a signal. */ -- cgit v1.2.3 From c0b9bae9d18980afa1797fb7b75adb4fbc837b66 Mon Sep 17 00:00:00 2001 From: Franck Bui-Huu Date: Mon, 5 Feb 2007 15:24:21 +0100 Subject: [MIPS] signal: clean up sigframe structure This patch makes 'struct sigframe' declaration avalaible for all signals code. It allows signal32 to not have its own declaration. This patch also removes all ICACHE_REFILLS_WORKAROUND_WAR tests in structure declaration and hopefully make them more readable. Signed-off-by: Franck Bui-Huu Signed-off-by: Ralf Baechle --- arch/mips/kernel/signal-common.h | 26 +++++++++++++++++++ arch/mips/kernel/signal.c | 56 +++++++++++++++------------------------- arch/mips/kernel/signal32.c | 49 +++++++++++++++-------------------- arch/mips/kernel/signal_n32.c | 19 +++++++++----- 4 files changed, 81 insertions(+), 69 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/signal-common.h b/arch/mips/kernel/signal-common.h index 03d2b603fb84..6700bde06053 100644 --- a/arch/mips/kernel/signal-common.h +++ b/arch/mips/kernel/signal-common.h @@ -11,6 +11,32 @@ #ifndef __SIGNAL_COMMON_H #define __SIGNAL_COMMON_H +/* + * Horribly complicated - with the bloody RM9000 workarounds enabled + * the signal trampolines is moving to the end of the structure so we can + * increase the alignment without breaking software compatibility. + */ +#if ICACHE_REFILLS_WORKAROUND_WAR == 0 + +struct sigframe { + u32 sf_ass[4]; /* argument save space for o32 */ + u32 sf_code[2]; /* signal trampoline */ + struct sigcontext sf_sc; + sigset_t sf_mask; +}; + +#else /* ICACHE_REFILLS_WORKAROUND_WAR */ + +struct sigframe { + u32 sf_ass[4]; /* argument save space for o32 */ + u32 sf_pad[2]; + struct sigcontext sf_sc; /* hw context */ + sigset_t sf_mask; + u32 sf_code[8] ____cacheline_aligned; /* signal trampoline */ +}; + +#endif /* !ICACHE_REFILLS_WORKAROUND_WAR */ + /* * handle hardware context */ diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c index 7d5a631d6cab..4a7071863065 100644 --- a/arch/mips/kernel/signal.c +++ b/arch/mips/kernel/signal.c @@ -38,6 +38,27 @@ #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) +#if ICACHE_REFILLS_WORKAROUND_WAR == 0 + +struct rt_sigframe { + u32 rs_ass[4]; /* argument save space for o32 */ + u32 rs_code[2]; /* signal trampoline */ + struct siginfo rs_info; + struct ucontext rs_uc; +}; + +#else + +struct rt_sigframe { + u32 rs_ass[4]; /* argument save space for o32 */ + u32 rs_pad[2]; + struct siginfo rs_info; + struct ucontext rs_uc; + u32 rs_code[8] ____cacheline_aligned; /* signal trampoline */ +}; + +#endif + /* * Helper routines */ @@ -287,41 +308,6 @@ asmlinkage int sys_sigaltstack(nabi_no_regargs struct pt_regs regs) return do_sigaltstack(uss, uoss, usp); } -/* - * Horribly complicated - with the bloody RM9000 workarounds enabled - * the signal trampolines is moving to the end of the structure so we can - * increase the alignment without breaking software compatibility. - */ -#ifdef CONFIG_TRAD_SIGNALS -struct sigframe { - u32 sf_ass[4]; /* argument save space for o32 */ -#if ICACHE_REFILLS_WORKAROUND_WAR - u32 sf_pad[2]; -#else - u32 sf_code[2]; /* signal trampoline */ -#endif - struct sigcontext sf_sc; - sigset_t sf_mask; -#if ICACHE_REFILLS_WORKAROUND_WAR - u32 sf_code[8] ____cacheline_aligned; /* signal trampoline */ -#endif -}; -#endif - -struct rt_sigframe { - u32 rs_ass[4]; /* argument save space for o32 */ -#if ICACHE_REFILLS_WORKAROUND_WAR - u32 rs_pad[2]; -#else - u32 rs_code[2]; /* signal trampoline */ -#endif - struct siginfo rs_info; - struct ucontext rs_uc; -#if ICACHE_REFILLS_WORKAROUND_WAR - u32 rs_code[8] ____cacheline_aligned; /* signal trampoline */ -#endif -}; - #ifdef CONFIG_TRAD_SIGNALS save_static_function(sys_sigreturn); __attribute_used__ noinline static void diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c index c86a5ddff050..e0a855331826 100644 --- a/arch/mips/kernel/signal32.c +++ b/arch/mips/kernel/signal32.c @@ -139,6 +139,27 @@ struct ucontext32 { sigset_t32 uc_sigmask; /* mask last for extensibility */ }; +#if ICACHE_REFILLS_WORKAROUND_WAR == 0 + +struct rt_sigframe32 { + u32 rs_ass[4]; /* argument save space for o32 */ + u32 rs_code[2]; /* signal trampoline */ + compat_siginfo_t rs_info; + struct ucontext32 rs_uc; +}; + +#else /* ICACHE_REFILLS_WORKAROUND_WAR */ + +struct rt_sigframe32 { + u32 rs_ass[4]; /* argument save space for o32 */ + u32 rs_pad[2]; + compat_siginfo_t rs_info; + struct ucontext32 rs_uc; + u32 rs_code[8] __attribute__((aligned(32))); /* signal trampoline */ +}; + +#endif /* !ICACHE_REFILLS_WORKAROUND_WAR */ + extern void __put_sigset_unknown_nsig(void); extern void __get_sigset_unknown_nsig(void); @@ -383,34 +404,6 @@ static int restore_sigcontext32(struct pt_regs *regs, struct sigcontext32 __user return err; } -struct sigframe { - u32 sf_ass[4]; /* argument save space for o32 */ -#if ICACHE_REFILLS_WORKAROUND_WAR - u32 sf_pad[2]; -#else - u32 sf_code[2]; /* signal trampoline */ -#endif - struct sigcontext32 sf_sc; - sigset_t sf_mask; -#if ICACHE_REFILLS_WORKAROUND_WAR - u32 sf_code[8] ____cacheline_aligned; /* signal trampoline */ -#endif -}; - -struct rt_sigframe32 { - u32 rs_ass[4]; /* argument save space for o32 */ -#if ICACHE_REFILLS_WORKAROUND_WAR - u32 rs_pad[2]; -#else - u32 rs_code[2]; /* signal trampoline */ -#endif - compat_siginfo_t rs_info; - struct ucontext32 rs_uc; -#if ICACHE_REFILLS_WORKAROUND_WAR - u32 rs_code[8] __attribute__((aligned(32))); /* signal trampoline */ -#endif -}; - int copy_siginfo_to_user32(compat_siginfo_t __user *to, siginfo_t *from) { int err; diff --git a/arch/mips/kernel/signal_n32.c b/arch/mips/kernel/signal_n32.c index b28646b3ceae..192073ee098f 100644 --- a/arch/mips/kernel/signal_n32.c +++ b/arch/mips/kernel/signal_n32.c @@ -66,20 +66,27 @@ struct ucontextn32 { sigset_t uc_sigmask; /* mask last for extensibility */ }; +#if ICACHE_REFILLS_WORKAROUND_WAR == 0 + struct rt_sigframe_n32 { u32 rs_ass[4]; /* argument save space for o32 */ -#if ICACHE_REFILLS_WORKAROUND_WAR - u32 rs_pad[2]; -#else u32 rs_code[2]; /* signal trampoline */ -#endif struct siginfo rs_info; struct ucontextn32 rs_uc; -#if ICACHE_REFILLS_WORKAROUND_WAR +}; + +#else /* ICACHE_REFILLS_WORKAROUND_WAR */ + +struct rt_sigframe_n32 { + u32 rs_ass[4]; /* argument save space for o32 */ + u32 rs_pad[2]; + struct siginfo rs_info; + struct ucontextn32 rs_uc; u32 rs_code[8] ____cacheline_aligned; /* signal trampoline */ -#endif }; +#endif /* !ICACHE_REFILLS_WORKAROUND_WAR */ + extern void sigset_from_compat (sigset_t *set, compat_sigset_t *compat); save_static_function(sysn32_rt_sigsuspend); -- cgit v1.2.3 From 36a1f2c24f42fc2531d5e21914db56ce8ee346f6 Mon Sep 17 00:00:00 2001 From: Franck Bui-Huu Date: Mon, 5 Feb 2007 15:24:22 +0100 Subject: [MIPS] signal32: remove duplicate code There's no point for signal32.c to redefine get_sigframe(). It should use the one define in signal.c instead. The same stands for install_sigtramp(). Signed-off-by: Franck Bui-Huu Signed-off-by: Ralf Baechle --- arch/mips/kernel/signal32.c | 50 ++++----------------------------------------- 1 file changed, 4 insertions(+), 46 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c index e0a855331826..5934f33224f8 100644 --- a/arch/mips/kernel/signal32.c +++ b/arch/mips/kernel/signal32.c @@ -33,6 +33,8 @@ #include #include +#include "signal-common.h" + #define SI_PAD_SIZE32 ((SI_MAX_SIZE/sizeof(int)) - 3) typedef struct compat_siginfo { @@ -604,32 +606,6 @@ out: return err; } -/* - * Determine which stack to use.. - */ -static inline void __user *get_sigframe(struct k_sigaction *ka, - struct pt_regs *regs, - size_t frame_size) -{ - unsigned long sp; - - /* Default to using normal stack */ - sp = regs->regs[29]; - - /* - * FPU emulator may have it's own trampoline active just - * above the user stack, 16-bytes before the next lowest - * 16 byte boundary. Try to avoid trashing it. - */ - sp -= 32; - - /* This is the X/Open sanctioned signal stack switching. */ - if ((ka->sa.sa_flags & SA_ONSTACK) && (sas_ss_flags (sp) == 0)) - sp = current->sas_ss_sp + current->sas_ss_size; - - return (void __user *)((sp - frame_size) & ALMASK); -} - int setup_frame_32(struct k_sigaction * ka, struct pt_regs *regs, int signr, sigset_t *set) { @@ -640,15 +616,7 @@ int setup_frame_32(struct k_sigaction * ka, struct pt_regs *regs, if (!access_ok(VERIFY_WRITE, frame, sizeof (*frame))) goto give_sigsegv; - /* - * Set up the return code ... - * - * li v0, __NR_O32_sigreturn - * syscall - */ - err |= __put_user(0x24020000 + __NR_O32_sigreturn, frame->sf_code + 0); - err |= __put_user(0x0000000c , frame->sf_code + 1); - flush_cache_sigtramp((unsigned long) frame->sf_code); + err |= install_sigtramp(frame->sf_code, __NR_O32_sigreturn); err |= setup_sigcontext32(regs, &frame->sf_sc); err |= __copy_to_user(&frame->sf_mask, set, sizeof(*set)); @@ -695,17 +663,7 @@ int setup_rt_frame_32(struct k_sigaction * ka, struct pt_regs *regs, if (!access_ok(VERIFY_WRITE, frame, sizeof (*frame))) goto give_sigsegv; - /* Set up to return from userspace. If provided, use a stub already - in userspace. */ - /* - * Set up the return code ... - * - * li v0, __NR_O32_rt_sigreturn - * syscall - */ - err |= __put_user(0x24020000 + __NR_O32_rt_sigreturn, frame->rs_code + 0); - err |= __put_user(0x0000000c , frame->rs_code + 1); - flush_cache_sigtramp((unsigned long) frame->rs_code); + err |= install_sigtramp(frame->rs_code, __NR_O32_rt_sigreturn); /* Convert (siginfo_t -> compat_siginfo_t) and copy to user. */ err |= copy_siginfo_to_user32(&frame->rs_info, info); -- cgit v1.2.3 From 601dde45f698ee1be5fe03a68b895efe6ca6b858 Mon Sep 17 00:00:00 2001 From: Franck Bui-Huu Date: Mon, 5 Feb 2007 15:24:23 +0100 Subject: [MIPS] signal: test return value of install_sigtramp() Signed-off-by: Franck Bui-Huu Signed-off-by: Ralf Baechle --- arch/mips/kernel/signal.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c index 4a7071863065..d676805a34ba 100644 --- a/arch/mips/kernel/signal.c +++ b/arch/mips/kernel/signal.c @@ -184,7 +184,7 @@ int install_sigtramp(unsigned int __user *tramp, unsigned int syscall) */ err = __put_user(0x24020000 + syscall, tramp + 0); - err |= __put_user(0x0000000c , tramp + 1); + err |= __put_user(0x0000000c , tramp + 1); if (ICACHE_REFILLS_WORKAROUND_WAR) { err |= __put_user(0, tramp + 2); err |= __put_user(0, tramp + 3); @@ -400,7 +400,7 @@ int setup_frame(struct k_sigaction * ka, struct pt_regs *regs, if (!access_ok(VERIFY_WRITE, frame, sizeof (*frame))) goto give_sigsegv; - install_sigtramp(frame->sf_code, __NR_sigreturn); + err |= install_sigtramp(frame->sf_code, __NR_sigreturn); err |= setup_sigcontext(regs, &frame->sf_sc); err |= __copy_to_user(&frame->sf_mask, set, sizeof(*set)); @@ -447,7 +447,7 @@ int setup_rt_frame(struct k_sigaction * ka, struct pt_regs *regs, if (!access_ok(VERIFY_WRITE, frame, sizeof (*frame))) goto give_sigsegv; - install_sigtramp(frame->rs_code, __NR_rt_sigreturn); + err |= install_sigtramp(frame->rs_code, __NR_rt_sigreturn); /* Create siginfo. */ err |= copy_siginfo_to_user(&frame->rs_info, info); -- cgit v1.2.3 From 722bb63de630f9500db1f12ed32e1dd9349a8049 Mon Sep 17 00:00:00 2001 From: Franck Bui-Huu Date: Mon, 5 Feb 2007 15:24:24 +0100 Subject: [MIPS] signal: factorize debug code Signed-off-by: Franck Bui-Huu Signed-off-by: Ralf Baechle --- arch/mips/kernel/signal-common.h | 8 ++++++++ arch/mips/kernel/signal.c | 13 ++++--------- arch/mips/kernel/signal32.c | 16 ++++++---------- arch/mips/kernel/signal_n32.c | 7 ++----- 4 files changed, 20 insertions(+), 24 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/signal-common.h b/arch/mips/kernel/signal-common.h index 6700bde06053..9a8abd67ec5c 100644 --- a/arch/mips/kernel/signal-common.h +++ b/arch/mips/kernel/signal-common.h @@ -11,6 +11,14 @@ #ifndef __SIGNAL_COMMON_H #define __SIGNAL_COMMON_H +/* #define DEBUG_SIG */ + +#ifdef DEBUG_SIG +# define DEBUGP(fmt, args...) printk("%s: " fmt, __FUNCTION__ , ##args) +#else +# define DEBUGP(fmt, args...) +#endif + /* * Horribly complicated - with the bloody RM9000 workarounds enabled * the signal trampolines is moving to the end of the structure so we can diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c index d676805a34ba..a5adab1c94c3 100644 --- a/arch/mips/kernel/signal.c +++ b/arch/mips/kernel/signal.c @@ -34,8 +34,6 @@ #include "signal-common.h" -#define DEBUG_SIG 0 - #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) #if ICACHE_REFILLS_WORKAROUND_WAR == 0 @@ -424,11 +422,9 @@ int setup_frame(struct k_sigaction * ka, struct pt_regs *regs, regs->regs[31] = (unsigned long) frame->sf_code; regs->cp0_epc = regs->regs[25] = (unsigned long) ka->sa.sa_handler; -#if DEBUG_SIG - printk("SIG deliver (%s:%d): sp=0x%p pc=0x%lx ra=0x%p\n", + DEBUGP("SIG deliver (%s:%d): sp=0x%p pc=0x%lx ra=0x%lx\n", current->comm, current->pid, - frame, regs->cp0_epc, frame->regs[31]); -#endif + frame, regs->cp0_epc, regs->regs[31]); return 0; give_sigsegv: @@ -484,11 +480,10 @@ int setup_rt_frame(struct k_sigaction * ka, struct pt_regs *regs, regs->regs[31] = (unsigned long) frame->rs_code; regs->cp0_epc = regs->regs[25] = (unsigned long) ka->sa.sa_handler; -#if DEBUG_SIG - printk("SIG deliver (%s:%d): sp=0x%p pc=0x%lx ra=0x%p\n", + DEBUGP("SIG deliver (%s:%d): sp=0x%p pc=0x%lx ra=0x%lx\n", current->comm, current->pid, frame, regs->cp0_epc, regs->regs[31]); -#endif + return 0; give_sigsegv: diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c index 5934f33224f8..1a99a57739e1 100644 --- a/arch/mips/kernel/signal32.c +++ b/arch/mips/kernel/signal32.c @@ -104,8 +104,6 @@ typedef struct compat_siginfo { #define __NR_O32_rt_sigreturn 4193 #define __NR_O32_restart_syscall 4253 -#define DEBUG_SIG 0 - #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) /* 32-bit compatibility types */ @@ -640,11 +638,10 @@ int setup_frame_32(struct k_sigaction * ka, struct pt_regs *regs, regs->regs[31] = (unsigned long) frame->sf_code; regs->cp0_epc = regs->regs[25] = (unsigned long) ka->sa.sa_handler; -#if DEBUG_SIG - printk("SIG deliver (%s:%d): sp=0x%p pc=0x%lx ra=0x%p\n", + DEBUGP("SIG deliver (%s:%d): sp=0x%p pc=0x%lx ra=0x%lx\n", current->comm, current->pid, - frame, regs->cp0_epc, frame->sf_code); -#endif + frame, regs->cp0_epc, regs->regs[31]); + return 0; give_sigsegv: @@ -701,11 +698,10 @@ int setup_rt_frame_32(struct k_sigaction * ka, struct pt_regs *regs, regs->regs[31] = (unsigned long) frame->rs_code; regs->cp0_epc = regs->regs[25] = (unsigned long) ka->sa.sa_handler; -#if DEBUG_SIG - printk("SIG deliver (%s:%d): sp=0x%p pc=0x%lx ra=0x%p\n", + DEBUGP("SIG deliver (%s:%d): sp=0x%p pc=0x%lx ra=0x%lx\n", current->comm, current->pid, - frame, regs->cp0_epc, frame->rs_code); -#endif + frame, regs->cp0_epc, regs->regs[31]); + return 0; give_sigsegv: diff --git a/arch/mips/kernel/signal_n32.c b/arch/mips/kernel/signal_n32.c index 192073ee098f..1d4f39cd0386 100644 --- a/arch/mips/kernel/signal_n32.c +++ b/arch/mips/kernel/signal_n32.c @@ -47,8 +47,6 @@ #define __NR_N32_rt_sigreturn 6211 #define __NR_N32_restart_syscall 6214 -#define DEBUG_SIG 0 - #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) /* IRIX compatible stack_t */ @@ -221,11 +219,10 @@ int setup_rt_frame_n32(struct k_sigaction * ka, regs->regs[31] = (unsigned long) frame->rs_code; regs->cp0_epc = regs->regs[25] = (unsigned long) ka->sa.sa_handler; -#if DEBUG_SIG - printk("SIG deliver (%s:%d): sp=0x%p pc=0x%lx ra=0x%p\n", + DEBUGP("SIG deliver (%s:%d): sp=0x%p pc=0x%lx ra=0x%lx\n", current->comm, current->pid, frame, regs->cp0_epc, regs->regs[31]); -#endif + return 0; give_sigsegv: -- cgit v1.2.3 From 9432a9ba96ea8d007341c4e7859d393bfd357c5a Mon Sep 17 00:00:00 2001 From: Franck Bui-Huu Date: Mon, 5 Feb 2007 15:24:25 +0100 Subject: [MIPS] signal32: reduce {setup,restore}_sigcontext32 sizes This trivial changes should decrease a lot the size of these 2 functions. Signed-off-by: Franck Bui-Huu Signed-off-by: Ralf Baechle --- arch/mips/kernel/signal32.c | 211 ++++++++++++++++++++------------------------ 1 file changed, 97 insertions(+), 114 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c index 1a99a57739e1..5d102efbdbea 100644 --- a/arch/mips/kernel/signal32.c +++ b/arch/mips/kernel/signal32.c @@ -160,6 +160,103 @@ struct rt_sigframe32 { #endif /* !ICACHE_REFILLS_WORKAROUND_WAR */ +/* + * sigcontext handlers + */ +static int setup_sigcontext32(struct pt_regs *regs, + struct sigcontext32 __user *sc) +{ + int err = 0; + int i; + + err |= __put_user(regs->cp0_epc, &sc->sc_pc); + err |= __put_user(regs->cp0_status, &sc->sc_status); + + err |= __put_user(0, &sc->sc_regs[0]); + for (i = 1; i < 32; i++) + err |= __put_user(regs->regs[i], &sc->sc_regs[i]); + + err |= __put_user(regs->hi, &sc->sc_mdhi); + err |= __put_user(regs->lo, &sc->sc_mdlo); + if (cpu_has_dsp) { + err |= __put_user(rddsp(DSP_MASK), &sc->sc_dsp); + err |= __put_user(mfhi1(), &sc->sc_hi1); + err |= __put_user(mflo1(), &sc->sc_lo1); + err |= __put_user(mfhi2(), &sc->sc_hi2); + err |= __put_user(mflo2(), &sc->sc_lo2); + err |= __put_user(mfhi3(), &sc->sc_hi3); + err |= __put_user(mflo3(), &sc->sc_lo3); + } + + err |= __put_user(!!used_math(), &sc->sc_used_math); + + if (used_math()) { + /* + * Save FPU state to signal context. Signal handler + * will "inherit" current FPU state. + */ + preempt_disable(); + + if (!is_fpu_owner()) { + own_fpu(); + restore_fp(current); + } + err |= save_fp_context32(sc); + + preempt_enable(); + } + return err; +} + +static int restore_sigcontext32(struct pt_regs *regs, + struct sigcontext32 __user *sc) +{ + u32 used_math; + int err = 0; + s32 treg; + int i; + + /* Always make any pending restarted system calls return -EINTR */ + current_thread_info()->restart_block.fn = do_no_restart_syscall; + + err |= __get_user(regs->cp0_epc, &sc->sc_pc); + err |= __get_user(regs->hi, &sc->sc_mdhi); + err |= __get_user(regs->lo, &sc->sc_mdlo); + if (cpu_has_dsp) { + err |= __get_user(treg, &sc->sc_hi1); mthi1(treg); + err |= __get_user(treg, &sc->sc_lo1); mtlo1(treg); + err |= __get_user(treg, &sc->sc_hi2); mthi2(treg); + err |= __get_user(treg, &sc->sc_lo2); mtlo2(treg); + err |= __get_user(treg, &sc->sc_hi3); mthi3(treg); + err |= __get_user(treg, &sc->sc_lo3); mtlo3(treg); + err |= __get_user(treg, &sc->sc_dsp); wrdsp(treg, DSP_MASK); + } + + for (i = 1; i < 32; i++) + err |= __get_user(regs->regs[i], &sc->sc_regs[i]); + + err |= __get_user(used_math, &sc->sc_used_math); + conditional_used_math(used_math); + + preempt_disable(); + + if (used_math()) { + /* restore fpu context if we have used it before */ + own_fpu(); + err |= restore_fp_context32(sc); + } else { + /* signal handler may have used FPU. Give it up. */ + lose_fpu(); + } + + preempt_enable(); + + return err; +} + +/* + * + */ extern void __put_sigset_unknown_nsig(void); extern void __get_sigset_unknown_nsig(void); @@ -347,63 +444,6 @@ asmlinkage int sys32_sigaltstack(nabi_no_regargs struct pt_regs regs) return ret; } -static int restore_sigcontext32(struct pt_regs *regs, struct sigcontext32 __user *sc) -{ - u32 used_math; - int err = 0; - s32 treg; - - /* Always make any pending restarted system calls return -EINTR */ - current_thread_info()->restart_block.fn = do_no_restart_syscall; - - err |= __get_user(regs->cp0_epc, &sc->sc_pc); - err |= __get_user(regs->hi, &sc->sc_mdhi); - err |= __get_user(regs->lo, &sc->sc_mdlo); - if (cpu_has_dsp) { - err |= __get_user(treg, &sc->sc_hi1); mthi1(treg); - err |= __get_user(treg, &sc->sc_lo1); mtlo1(treg); - err |= __get_user(treg, &sc->sc_hi2); mthi2(treg); - err |= __get_user(treg, &sc->sc_lo2); mtlo2(treg); - err |= __get_user(treg, &sc->sc_hi3); mthi3(treg); - err |= __get_user(treg, &sc->sc_lo3); mtlo3(treg); - err |= __get_user(treg, &sc->sc_dsp); wrdsp(treg, DSP_MASK); - } - -#define restore_gp_reg(i) do { \ - err |= __get_user(regs->regs[i], &sc->sc_regs[i]); \ -} while(0) - restore_gp_reg( 1); restore_gp_reg( 2); restore_gp_reg( 3); - restore_gp_reg( 4); restore_gp_reg( 5); restore_gp_reg( 6); - restore_gp_reg( 7); restore_gp_reg( 8); restore_gp_reg( 9); - restore_gp_reg(10); restore_gp_reg(11); restore_gp_reg(12); - restore_gp_reg(13); restore_gp_reg(14); restore_gp_reg(15); - restore_gp_reg(16); restore_gp_reg(17); restore_gp_reg(18); - restore_gp_reg(19); restore_gp_reg(20); restore_gp_reg(21); - restore_gp_reg(22); restore_gp_reg(23); restore_gp_reg(24); - restore_gp_reg(25); restore_gp_reg(26); restore_gp_reg(27); - restore_gp_reg(28); restore_gp_reg(29); restore_gp_reg(30); - restore_gp_reg(31); -#undef restore_gp_reg - - err |= __get_user(used_math, &sc->sc_used_math); - conditional_used_math(used_math); - - preempt_disable(); - - if (used_math()) { - /* restore fpu context if we have used it before */ - own_fpu(); - err |= restore_fp_context32(sc); - } else { - /* signal handler may have used FPU. Give it up. */ - lose_fpu(); - } - - preempt_enable(); - - return err; -} - int copy_siginfo_to_user32(compat_siginfo_t __user *to, siginfo_t *from) { int err; @@ -547,63 +587,6 @@ badframe: force_sig(SIGSEGV, current); } -static inline int setup_sigcontext32(struct pt_regs *regs, - struct sigcontext32 __user *sc) -{ - int err = 0; - - err |= __put_user(regs->cp0_epc, &sc->sc_pc); - err |= __put_user(regs->cp0_status, &sc->sc_status); - -#define save_gp_reg(i) { \ - err |= __put_user(regs->regs[i], &sc->sc_regs[i]); \ -} while(0) - __put_user(0, &sc->sc_regs[0]); save_gp_reg(1); save_gp_reg(2); - save_gp_reg(3); save_gp_reg(4); save_gp_reg(5); save_gp_reg(6); - save_gp_reg(7); save_gp_reg(8); save_gp_reg(9); save_gp_reg(10); - save_gp_reg(11); save_gp_reg(12); save_gp_reg(13); save_gp_reg(14); - save_gp_reg(15); save_gp_reg(16); save_gp_reg(17); save_gp_reg(18); - save_gp_reg(19); save_gp_reg(20); save_gp_reg(21); save_gp_reg(22); - save_gp_reg(23); save_gp_reg(24); save_gp_reg(25); save_gp_reg(26); - save_gp_reg(27); save_gp_reg(28); save_gp_reg(29); save_gp_reg(30); - save_gp_reg(31); -#undef save_gp_reg - - err |= __put_user(regs->hi, &sc->sc_mdhi); - err |= __put_user(regs->lo, &sc->sc_mdlo); - if (cpu_has_dsp) { - err |= __put_user(rddsp(DSP_MASK), &sc->sc_dsp); - err |= __put_user(mfhi1(), &sc->sc_hi1); - err |= __put_user(mflo1(), &sc->sc_lo1); - err |= __put_user(mfhi2(), &sc->sc_hi2); - err |= __put_user(mflo2(), &sc->sc_lo2); - err |= __put_user(mfhi3(), &sc->sc_hi3); - err |= __put_user(mflo3(), &sc->sc_lo3); - } - - err |= __put_user(!!used_math(), &sc->sc_used_math); - - if (!used_math()) - goto out; - - /* - * Save FPU state to signal context. Signal handler will "inherit" - * current FPU state. - */ - preempt_disable(); - - if (!is_fpu_owner()) { - own_fpu(); - restore_fp(current); - } - err |= save_fp_context32(sc); - - preempt_enable(); - -out: - return err; -} - int setup_frame_32(struct k_sigaction * ka, struct pt_regs *regs, int signr, sigset_t *set) { -- cgit v1.2.3 From 6bfe96616062acb75c2460f01acc79236a8ba0e8 Mon Sep 17 00:00:00 2001 From: Franck Bui-Huu Date: Mon, 5 Feb 2007 15:24:26 +0100 Subject: [MIPS] signal32: no need to save c0_status register in setup_sigcontext32() All the information in the MIPS c0_status register is priviledged. Nothing that would constitute part of the thread context. The one flag one could possibly argument about might be c0_status.fr but none of the ABIs or tools or application software can make use of it. So for consistency with restore_sigcontext32(), which does not restore c0_status register, this patch remove the saving part. Signed-off-by: Franck Bui-Huu Signed-off-by: Ralf Baechle --- arch/mips/kernel/asm-offsets.c | 1 - arch/mips/kernel/signal32.c | 1 - 2 files changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/asm-offsets.c b/arch/mips/kernel/asm-offsets.c index ea7df4b8da33..c0b089d47181 100644 --- a/arch/mips/kernel/asm-offsets.c +++ b/arch/mips/kernel/asm-offsets.c @@ -249,7 +249,6 @@ void output_sc_defines(void) offset("#define SC_MDHI ", struct sigcontext, sc_mdhi); offset("#define SC_MDLO ", struct sigcontext, sc_mdlo); offset("#define SC_PC ", struct sigcontext, sc_pc); - offset("#define SC_STATUS ", struct sigcontext, sc_status); offset("#define SC_FPC_CSR ", struct sigcontext, sc_fpc_csr); offset("#define SC_FPC_EIR ", struct sigcontext, sc_fpc_eir); offset("#define SC_HI1 ", struct sigcontext, sc_hi1); diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c index 5d102efbdbea..0994d6e1d691 100644 --- a/arch/mips/kernel/signal32.c +++ b/arch/mips/kernel/signal32.c @@ -170,7 +170,6 @@ static int setup_sigcontext32(struct pt_regs *regs, int i; err |= __put_user(regs->cp0_epc, &sc->sc_pc); - err |= __put_user(regs->cp0_status, &sc->sc_status); err |= __put_user(0, &sc->sc_regs[0]); for (i = 1; i < 32; i++) -- cgit v1.2.3 From f90080a059fc19444b3a63affd1f4ecece62c11c Mon Sep 17 00:00:00 2001 From: Franck Bui-Huu Date: Mon, 5 Feb 2007 15:24:27 +0100 Subject: [MIPS] signal: do not use save_static_function() anymore This macro was used to save static registers before calling sys_sigsuspend() and sys_sigreturn(). For the sys_sigreturn() case, there's no point to save them since they have been already saved by setup_sigcontext() before calling the signal handler. For the sys_sigsuspend() case, I don't see any reasons... Signed-off-by: Franck Bui-Huu Signed-off-by: Ralf Baechle --- arch/mips/kernel/signal.c | 16 ++++------------ arch/mips/kernel/signal32.c | 16 ++++------------ arch/mips/kernel/signal_n32.c | 8 ++------ 3 files changed, 10 insertions(+), 30 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c index a5adab1c94c3..b3f8f0df1b68 100644 --- a/arch/mips/kernel/signal.c +++ b/arch/mips/kernel/signal.c @@ -201,9 +201,7 @@ int install_sigtramp(unsigned int __user *tramp, unsigned int syscall) */ #ifdef CONFIG_TRAD_SIGNALS -save_static_function(sys_sigsuspend); -__attribute_used__ noinline static int -_sys_sigsuspend(nabi_no_regargs struct pt_regs regs) +asmlinkage int sys_sigsuspend(nabi_no_regargs struct pt_regs regs) { sigset_t newset; sigset_t __user *uset; @@ -226,9 +224,7 @@ _sys_sigsuspend(nabi_no_regargs struct pt_regs regs) } #endif -save_static_function(sys_rt_sigsuspend); -__attribute_used__ noinline static int -_sys_rt_sigsuspend(nabi_no_regargs struct pt_regs regs) +asmlinkage int sys_rt_sigsuspend(nabi_no_regargs struct pt_regs regs) { sigset_t newset; sigset_t __user *unewset; @@ -307,9 +303,7 @@ asmlinkage int sys_sigaltstack(nabi_no_regargs struct pt_regs regs) } #ifdef CONFIG_TRAD_SIGNALS -save_static_function(sys_sigreturn); -__attribute_used__ noinline static void -_sys_sigreturn(nabi_no_regargs struct pt_regs regs) +asmlinkage void sys_sigreturn(nabi_no_regargs struct pt_regs regs) { struct sigframe __user *frame; sigset_t blocked; @@ -344,9 +338,7 @@ badframe: } #endif /* CONFIG_TRAD_SIGNALS */ -save_static_function(sys_rt_sigreturn); -__attribute_used__ noinline static void -_sys_rt_sigreturn(nabi_no_regargs struct pt_regs regs) +asmlinkage void sys_rt_sigreturn(nabi_no_regargs struct pt_regs regs) { struct rt_sigframe __user *frame; sigset_t set; diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c index 0994d6e1d691..183fc7e55f34 100644 --- a/arch/mips/kernel/signal32.c +++ b/arch/mips/kernel/signal32.c @@ -308,9 +308,7 @@ static inline int get_sigset(sigset_t *kbuf, const compat_sigset_t __user *ubuf) * Atomically swap in the new signal mask, and wait for a signal. */ -save_static_function(sys32_sigsuspend); -__attribute_used__ noinline static int -_sys32_sigsuspend(nabi_no_regargs struct pt_regs regs) +asmlinkage int sys32_sigsuspend(nabi_no_regargs struct pt_regs regs) { compat_sigset_t __user *uset; sigset_t newset; @@ -332,9 +330,7 @@ _sys32_sigsuspend(nabi_no_regargs struct pt_regs regs) return -ERESTARTNOHAND; } -save_static_function(sys32_rt_sigsuspend); -__attribute_used__ noinline static int -_sys32_rt_sigsuspend(nabi_no_regargs struct pt_regs regs) +asmlinkage int sys32_rt_sigsuspend(nabi_no_regargs struct pt_regs regs) { compat_sigset_t __user *uset; sigset_t newset; @@ -495,9 +491,7 @@ int copy_siginfo_to_user32(compat_siginfo_t __user *to, siginfo_t *from) return err; } -save_static_function(sys32_sigreturn); -__attribute_used__ noinline static void -_sys32_sigreturn(nabi_no_regargs struct pt_regs regs) +asmlinkage void sys32_sigreturn(nabi_no_regargs struct pt_regs regs) { struct sigframe __user *frame; sigset_t blocked; @@ -531,9 +525,7 @@ badframe: force_sig(SIGSEGV, current); } -save_static_function(sys32_rt_sigreturn); -__attribute_used__ noinline static void -_sys32_rt_sigreturn(nabi_no_regargs struct pt_regs regs) +asmlinkage void sys32_rt_sigreturn(nabi_no_regargs struct pt_regs regs) { struct rt_sigframe32 __user *frame; mm_segment_t old_fs; diff --git a/arch/mips/kernel/signal_n32.c b/arch/mips/kernel/signal_n32.c index 1d4f39cd0386..57456e6a0c62 100644 --- a/arch/mips/kernel/signal_n32.c +++ b/arch/mips/kernel/signal_n32.c @@ -87,9 +87,7 @@ struct rt_sigframe_n32 { extern void sigset_from_compat (sigset_t *set, compat_sigset_t *compat); -save_static_function(sysn32_rt_sigsuspend); -__attribute_used__ noinline static int -_sysn32_rt_sigsuspend(nabi_no_regargs struct pt_regs regs) +asmlinkage int sysn32_rt_sigsuspend(nabi_no_regargs struct pt_regs regs) { compat_sigset_t __user *unewset; compat_sigset_t uset; @@ -119,9 +117,7 @@ _sysn32_rt_sigsuspend(nabi_no_regargs struct pt_regs regs) return -ERESTARTNOHAND; } -save_static_function(sysn32_rt_sigreturn); -__attribute_used__ noinline static void -_sysn32_rt_sigreturn(nabi_no_regargs struct pt_regs regs) +asmlinkage void sysn32_rt_sigreturn(nabi_no_regargs struct pt_regs regs) { struct rt_sigframe_n32 __user *frame; sigset_t set; -- cgit v1.2.3 From e692eb30ffc2b99e62f766f9958f46dfdc1013cc Mon Sep 17 00:00:00 2001 From: Franck Bui-Huu Date: Mon, 5 Feb 2007 15:24:28 +0100 Subject: [MIPS] signal: do not inline handle_signal() Signed-off-by: Franck Bui-Huu Signed-off-by: Ralf Baechle --- arch/mips/kernel/signal.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c index b3f8f0df1b68..54398af2371f 100644 --- a/arch/mips/kernel/signal.c +++ b/arch/mips/kernel/signal.c @@ -483,7 +483,7 @@ give_sigsegv: return -EFAULT; } -static inline int handle_signal(unsigned long sig, siginfo_t *info, +static int handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, sigset_t *oldset, struct pt_regs *regs) { int ret; -- cgit v1.2.3 From 86acd49aa128bd7a1d4362c256c21fbdc2d5b1a0 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=B3=20Bilski?= Date: Mon, 5 Feb 2007 19:57:25 +0100 Subject: [CPUFREQ] Enhanced PowerSaver driver This is driver for Enhanced Powersaver which is present in VIA C7 processors. Beta tested by Jorgen (jorgen (at) greven dot dk). Thanks! Based on documentation provided by Dave Jones (Thanks!) and C7 Eden datasheet available from www.via.com.tw. Looks like all these C7 Eden CPU's don't have P-states in BIOS. I know that 2 p-states is low, but Jorgen finds it usefull anyway because board is passive cooled. There are 3 different types of C7 processors (called brands): 0. C7-M - these processors can set any maultiplier between min and max, any voltage between min and max. 1. C7 - only min and max states are supported. Voltage is different for min and max states. 2. Eden - only min and max states are supported. Looks like this brand can only change multiplier. Voltage seems to be the same for min and max frequency. Signed-off-by: Rafal Bilski Signed-off-by: Dave Jones --- arch/i386/kernel/cpu/cpufreq/Kconfig | 9 + arch/i386/kernel/cpu/cpufreq/Makefile | 1 + arch/i386/kernel/cpu/cpufreq/e_powersaver.c | 334 ++++++++++++++++++++++++++++ 3 files changed, 344 insertions(+) create mode 100644 arch/i386/kernel/cpu/cpufreq/e_powersaver.c (limited to 'arch') diff --git a/arch/i386/kernel/cpu/cpufreq/Kconfig b/arch/i386/kernel/cpu/cpufreq/Kconfig index 5299c5bf4454..6c52182ca323 100644 --- a/arch/i386/kernel/cpu/cpufreq/Kconfig +++ b/arch/i386/kernel/cpu/cpufreq/Kconfig @@ -217,6 +217,15 @@ config X86_LONGHAUL If in doubt, say N. +config X86_E_POWERSAVER + tristate "VIA C7 Enhanced PowerSaver (EXPERIMENTAL)" + select CPU_FREQ_TABLE + depends on EXPERIMENTAL + help + This adds the CPUFreq driver for VIA C7 processors. + + If in doubt, say N. + comment "shared options" config X86_ACPI_CPUFREQ_PROC_INTF diff --git a/arch/i386/kernel/cpu/cpufreq/Makefile b/arch/i386/kernel/cpu/cpufreq/Makefile index 8de3abe322a9..560f7760dae5 100644 --- a/arch/i386/kernel/cpu/cpufreq/Makefile +++ b/arch/i386/kernel/cpu/cpufreq/Makefile @@ -2,6 +2,7 @@ obj-$(CONFIG_X86_POWERNOW_K6) += powernow-k6.o obj-$(CONFIG_X86_POWERNOW_K7) += powernow-k7.o obj-$(CONFIG_X86_POWERNOW_K8) += powernow-k8.o obj-$(CONFIG_X86_LONGHAUL) += longhaul.o +obj-$(CONFIG_X86_E_POWERSAVER) += e_powersaver.o obj-$(CONFIG_ELAN_CPUFREQ) += elanfreq.o obj-$(CONFIG_SC520_CPUFREQ) += sc520_freq.o obj-$(CONFIG_X86_LONGRUN) += longrun.o diff --git a/arch/i386/kernel/cpu/cpufreq/e_powersaver.c b/arch/i386/kernel/cpu/cpufreq/e_powersaver.c new file mode 100644 index 000000000000..3243725f80ca --- /dev/null +++ b/arch/i386/kernel/cpu/cpufreq/e_powersaver.c @@ -0,0 +1,334 @@ +/* + * Based on documentation provided by Dave Jones. Thanks! + * + * Licensed under the terms of the GNU GPL License version 2. + * + * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#define EPS_BRAND_C7M 0 +#define EPS_BRAND_C7 1 +#define EPS_BRAND_EDEN 2 +#define EPS_BRAND_C3 3 + +struct eps_cpu_data { + u32 fsb; + struct cpufreq_frequency_table freq_table[]; +}; + +static struct eps_cpu_data *eps_cpu[NR_CPUS]; + + +static unsigned int eps_get(unsigned int cpu) +{ + struct eps_cpu_data *centaur; + u32 lo, hi; + + if (cpu) + return 0; + centaur = eps_cpu[cpu]; + if (centaur == NULL) + return 0; + + /* Return current frequency */ + rdmsr(MSR_IA32_PERF_STATUS, lo, hi); + return centaur->fsb * ((lo >> 8) & 0xff); +} + +static int eps_set_state(struct eps_cpu_data *centaur, + unsigned int cpu, + u32 dest_state) +{ + struct cpufreq_freqs freqs; + u32 lo, hi; + int err = 0; + int i; + + freqs.old = eps_get(cpu); + freqs.new = centaur->fsb * ((dest_state >> 8) & 0xff); + freqs.cpu = cpu; + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + + /* Wait while CPU is busy */ + rdmsr(MSR_IA32_PERF_STATUS, lo, hi); + i = 0; + while (lo & ((1 << 16) | (1 << 17))) { + udelay(16); + rdmsr(MSR_IA32_PERF_STATUS, lo, hi); + i++; + if (unlikely(i > 64)) { + err = -ENODEV; + goto postchange; + } + } + /* Set new multiplier and voltage */ + wrmsr(MSR_IA32_PERF_CTL, dest_state & 0xffff, 0); + /* Wait until transition end */ + i = 0; + do { + udelay(16); + rdmsr(MSR_IA32_PERF_STATUS, lo, hi); + i++; + if (unlikely(i > 64)) { + err = -ENODEV; + goto postchange; + } + } while (lo & ((1 << 16) | (1 << 17))); + + /* Return current frequency */ +postchange: + rdmsr(MSR_IA32_PERF_STATUS, lo, hi); + freqs.new = centaur->fsb * ((lo >> 8) & 0xff); + + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + return err; +} + +static int eps_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + struct eps_cpu_data *centaur; + unsigned int newstate = 0; + unsigned int cpu = policy->cpu; + unsigned int dest_state; + int ret; + + if (unlikely(eps_cpu[cpu] == NULL)) + return -ENODEV; + centaur = eps_cpu[cpu]; + + if (unlikely(cpufreq_frequency_table_target(policy, + &eps_cpu[cpu]->freq_table[0], + target_freq, + relation, + &newstate))) { + return -EINVAL; + } + + /* Make frequency transition */ + dest_state = centaur->freq_table[newstate].index & 0xffff; + ret = eps_set_state(centaur, cpu, dest_state); + if (ret) + printk(KERN_ERR "eps: Timeout!\n"); + return ret; +} + +static int eps_verify(struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, + &eps_cpu[policy->cpu]->freq_table[0]); +} + +static int eps_cpu_init(struct cpufreq_policy *policy) +{ + unsigned int i; + u32 lo, hi; + u64 val; + u8 current_multiplier, current_voltage; + u8 max_multiplier, max_voltage; + u8 min_multiplier, min_voltage; + u8 brand; + u32 fsb; + struct eps_cpu_data *centaur; + struct cpufreq_frequency_table *f_table; + int k, step, voltage; + int ret; + int states; + + if (policy->cpu != 0) + return -ENODEV; + + /* Check brand */ + printk("eps: Detected VIA "); + rdmsr(0x1153, lo, hi); + brand = (((lo >> 2) ^ lo) >> 18) & 3; + switch(brand) { + case EPS_BRAND_C7M: + printk("C7-M\n"); + break; + case EPS_BRAND_C7: + printk("C7\n"); + break; + case EPS_BRAND_EDEN: + printk("Eden\n"); + break; + case EPS_BRAND_C3: + printk("C3\n"); + return -ENODEV; + break; + } + /* Enable Enhanced PowerSaver */ + rdmsrl(MSR_IA32_MISC_ENABLE, val); + if (!(val & 1 << 16)) { + val |= 1 << 16; + wrmsrl(MSR_IA32_MISC_ENABLE, val); + /* Can be locked at 0 */ + rdmsrl(MSR_IA32_MISC_ENABLE, val); + if (!(val & 1 << 16)) { + printk("eps: Can't enable Enhanced PowerSaver\n"); + return -ENODEV; + } + } + + /* Print voltage and multiplier */ + rdmsr(MSR_IA32_PERF_STATUS, lo, hi); + current_voltage = lo & 0xff; + printk("eps: Current voltage = %dmV\n", current_voltage * 16 + 700); + current_multiplier = (lo >> 8) & 0xff; + printk("eps: Current multiplier = %d\n", current_multiplier); + + /* Print limits */ + max_voltage = hi & 0xff; + printk("eps: Highest voltage = %dmV\n", max_voltage * 16 + 700); + max_multiplier = (hi >> 8) & 0xff; + printk("eps: Highest multiplier = %d\n", max_multiplier); + min_voltage = (hi >> 16) & 0xff; + printk("eps: Lowest voltage = %dmV\n", min_voltage * 16 + 700); + min_multiplier = (hi >> 24) & 0xff; + printk("eps: Lowest multiplier = %d\n", min_multiplier); + + /* Sanity checks */ + if (current_multiplier == 0 || max_multiplier == 0 + || min_multiplier == 0) + return -EINVAL; + if (current_multiplier > max_multiplier + || max_multiplier <= min_multiplier) + return -EINVAL; + if (current_voltage > 0x1c || max_voltage > 0x1c) + return -EINVAL; + if (max_voltage < min_voltage) + return -EINVAL; + + /* Calc FSB speed */ + fsb = cpu_khz / current_multiplier; + /* Calc number of p-states supported */ + if (brand == EPS_BRAND_C7M) + states = max_multiplier - min_multiplier + 1; + else + states = 2; + + /* Allocate private data and frequency table for current cpu */ + centaur = kzalloc(sizeof(struct eps_cpu_data) + + (states + 1) * sizeof(struct cpufreq_frequency_table), + GFP_KERNEL); + if (!centaur) + return -ENOMEM; + eps_cpu[0] = centaur; + + /* Copy basic values */ + centaur->fsb = fsb; + + /* Fill frequency and MSR value table */ + f_table = ¢aur->freq_table[0]; + if (brand == EPS_BRAND_EDEN) { + f_table[0].frequency = fsb * min_multiplier; + f_table[0].index = (min_multiplier << 8) | min_voltage; + f_table[1].frequency = fsb * max_multiplier; + f_table[1].index = (max_multiplier << 8) | max_voltage; + f_table[2].frequency = CPUFREQ_TABLE_END; + } else { + k = 0; + step = ((max_voltage - min_voltage) * 256) + / (max_multiplier - min_multiplier); + for (i = min_multiplier; i <= max_multiplier; i++) { + voltage = (k * step) / 256 + min_voltage; + f_table[k].frequency = fsb * i; + f_table[k].index = (i << 8) | voltage; + k++; + } + f_table[k].frequency = CPUFREQ_TABLE_END; + } + + policy->governor = CPUFREQ_DEFAULT_GOVERNOR; + policy->cpuinfo.transition_latency = 140000; /* 844mV -> 700mV in ns */ + policy->cur = fsb * current_multiplier; + + ret = cpufreq_frequency_table_cpuinfo(policy, ¢aur->freq_table[0]); + if (ret) { + kfree(centaur); + return ret; + } + + cpufreq_frequency_table_get_attr(¢aur->freq_table[0], policy->cpu); + return 0; +} + +static int eps_cpu_exit(struct cpufreq_policy *policy) +{ + unsigned int cpu = policy->cpu; + struct eps_cpu_data *centaur; + u32 lo, hi; + + if (eps_cpu[cpu] == NULL) + return -ENODEV; + centaur = eps_cpu[cpu]; + + /* Get max frequency */ + rdmsr(MSR_IA32_PERF_STATUS, lo, hi); + /* Set max frequency */ + eps_set_state(centaur, cpu, hi & 0xffff); + /* Bye */ + cpufreq_frequency_table_put_attr(policy->cpu); + kfree(eps_cpu[cpu]); + eps_cpu[cpu] = NULL; + return 0; +} + +static struct freq_attr* eps_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + +static struct cpufreq_driver eps_driver = { + .verify = eps_verify, + .target = eps_target, + .init = eps_cpu_init, + .exit = eps_cpu_exit, + .get = eps_get, + .name = "e_powersaver", + .owner = THIS_MODULE, + .attr = eps_attr, +}; + +static int __init eps_init(void) +{ + struct cpuinfo_x86 *c = cpu_data; + + /* This driver will work only on Centaur C7 processors with + * Enhanced SpeedStep/PowerSaver registers */ + if (c->x86_vendor != X86_VENDOR_CENTAUR + || c->x86 != 6 || c->x86_model != 10) + return -ENODEV; + if (!cpu_has(c, X86_FEATURE_EST)) + return -ENODEV; + + if (cpufreq_register_driver(&eps_driver)) + return -EINVAL; + return 0; +} + +static void __exit eps_exit(void) +{ + cpufreq_unregister_driver(&eps_driver); +} + +MODULE_AUTHOR("Rafa³ Bilski "); +MODULE_DESCRIPTION("Enhanced PowerSaver driver for VIA C7 CPU's."); +MODULE_LICENSE("GPL"); + +module_init(eps_init); +module_exit(eps_exit); -- cgit v1.2.3 From 9addf3b6388459f315adc728d27d34603a00d427 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=B3=20Bilski?= Date: Wed, 7 Feb 2007 22:53:29 +0100 Subject: [CPUFREQ] Longhaul - Simplier minmult Simple cleanup in code which is setting minmult. Signed-off-by: Rafal Bilski Signed-off-by: Dave Jones --- arch/i386/kernel/cpu/cpufreq/longhaul.c | 23 ++++++++--------------- 1 file changed, 8 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c index 98fbe28affff..8f65ebe4de5b 100644 --- a/arch/i386/kernel/cpu/cpufreq/longhaul.c +++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c @@ -358,22 +358,15 @@ static int __init longhaul_get_ranges(void) * C3 is booting at max anyway. */ maxmult = mult; /* Get min multiplier */ - switch (longhaul_version) { - case TYPE_LONGHAUL_V1: - case TYPE_LONGHAUL_V2: - minmult = 30; + switch (cpu_model) { + case CPU_NEHEMIAH: + minmult = 50; break; - - case TYPE_POWERSAVER: - /* Ezra-T */ - if (cpu_model == CPU_EZRA_T) - minmult = 30; - /* Nehemiah */ - else if (cpu_model == CPU_NEHEMIAH) - minmult = 50; - /* Nehemiah C */ - else if (cpu_model == CPU_NEHEMIAH_C) - minmult = 40; + case CPU_NEHEMIAH_C: + minmult = 40; + break; + default: + minmult = 30; break; } -- cgit v1.2.3 From e57501c15f48d6b7a8fe2b023be8f4779484482d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=B3=20Bilski?= Date: Thu, 8 Feb 2007 23:12:02 +0100 Subject: [CPUFREQ] Longhaul - Models of Nehemiah Borowed from VIA driver. Signed-off-by: Rafal Bilski Signed-off-by: Dave Jones --- arch/i386/kernel/cpu/cpufreq/longhaul.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c index 8f65ebe4de5b..fc9afbb7c1fc 100644 --- a/arch/i386/kernel/cpu/cpufreq/longhaul.c +++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c @@ -636,15 +636,15 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) switch (c->x86_mask) { case 0 ... 1: cpu_model = CPU_NEHEMIAH; - cpuname = "C3 'Nehemiah A' [C5N]"; + cpuname = "C3 'Nehemiah A' [C5XLOE]"; break; case 2 ... 4: cpu_model = CPU_NEHEMIAH; - cpuname = "C3 'Nehemiah B' [C5N]"; + cpuname = "C3 'Nehemiah B' [C5XLOH]"; break; case 5 ... 15: cpu_model = CPU_NEHEMIAH_C; - cpuname = "C3 'Nehemiah C' [C5N]"; + cpuname = "C3 'Nehemiah C' [C5P]"; break; } break; -- cgit v1.2.3 From 348f31ed2bd18391fe5903aa0ad7bfcda6d8ca0b Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=B3=20Bilski?= Date: Thu, 8 Feb 2007 18:56:04 +0100 Subject: [CPUFREQ] Longhaul - Separate frequency and voltage transition This change should make Longhaul more compatible with both ver. 2 and Powersaver processors. Voltage transitions will be done before or after frequency transition. That depends on direction of change. I don't know how to force conservative governor when voltage scaling is enabled, so there is only a warning for user. Minimal voltage is calculated in different way now because in this way more power is saved at lower multipliers. Signed-off-by: Rafal Bilski Signed-off-by: Dave Jones --- arch/i386/kernel/cpu/cpufreq/longhaul.c | 109 +++++++++++++++++++++++++++----- 1 file changed, 93 insertions(+), 16 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c index fc9afbb7c1fc..8f40cb47720e 100644 --- a/arch/i386/kernel/cpu/cpufreq/longhaul.c +++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c @@ -65,7 +65,8 @@ static unsigned int fsb; static struct mV_pos *vrm_mV_table; static unsigned char *mV_vrm_table; struct f_msr { - unsigned char vrm; + u8 vrm; + u8 pos; }; static struct f_msr f_msr_table[32]; @@ -75,6 +76,7 @@ static int can_scale_voltage; static struct acpi_processor *pr = NULL; static struct acpi_processor_cx *cx = NULL; static u8 longhaul_flags; +static u8 longhaul_pos; /* Module parameters */ static int scale_voltage; @@ -165,26 +167,47 @@ static void do_longhaul1(unsigned int clock_ratio_index) static void do_powersaver(int cx_address, unsigned int clock_ratio_index) { union msr_longhaul longhaul; + u8 dest_pos; u32 t; + dest_pos = f_msr_table[clock_ratio_index].pos; + rdmsrl(MSR_VIA_LONGHAUL, longhaul.val); + /* Setup new frequency */ longhaul.bits.RevisionKey = longhaul.bits.RevisionID; longhaul.bits.SoftBusRatio = clock_ratio_index & 0xf; longhaul.bits.SoftBusRatio4 = (clock_ratio_index & 0x10) >> 4; - longhaul.bits.EnableSoftBusRatio = 1; - - if (can_scale_voltage) { + /* Setup new voltage */ + if (can_scale_voltage) longhaul.bits.SoftVID = f_msr_table[clock_ratio_index].vrm; + /* Sync to timer tick */ + safe_halt(); + /* Raise voltage if necessary */ + if (can_scale_voltage && longhaul_pos < dest_pos) { longhaul.bits.EnableSoftVID = 1; + wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); + /* Change voltage */ + if (!cx_address) { + ACPI_FLUSH_CPU_CACHE(); + halt(); + } else { + ACPI_FLUSH_CPU_CACHE(); + /* Invoke C3 */ + inb(cx_address); + /* Dummy op - must do something useless after P_LVL3 + * read */ + t = inl(acpi_fadt.xpm_tmr_blk.address); + } + longhaul.bits.EnableSoftVID = 0; + wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); + longhaul_pos = dest_pos; } - /* Sync to timer tick */ - safe_halt(); /* Change frequency on next halt or sleep */ + longhaul.bits.EnableSoftBusRatio = 1; wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); if (!cx_address) { ACPI_FLUSH_CPU_CACHE(); - /* Invoke C1 */ halt(); } else { ACPI_FLUSH_CPU_CACHE(); @@ -194,12 +217,29 @@ static void do_powersaver(int cx_address, unsigned int clock_ratio_index) t = inl(acpi_fadt.xpm_tmr_blk.address); } /* Disable bus ratio bit */ - local_irq_disable(); - longhaul.bits.RevisionKey = longhaul.bits.RevisionID; longhaul.bits.EnableSoftBusRatio = 0; - longhaul.bits.EnableSoftBSEL = 0; - longhaul.bits.EnableSoftVID = 0; wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); + + /* Reduce voltage if necessary */ + if (can_scale_voltage && longhaul_pos > dest_pos) { + longhaul.bits.EnableSoftVID = 1; + wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); + /* Change voltage */ + if (!cx_address) { + ACPI_FLUSH_CPU_CACHE(); + halt(); + } else { + ACPI_FLUSH_CPU_CACHE(); + /* Invoke C3 */ + inb(cx_address); + /* Dummy op - must do something useless after P_LVL3 + * read */ + t = inl(acpi_fadt.xpm_tmr_blk.address); + } + longhaul.bits.EnableSoftVID = 0; + wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); + longhaul_pos = dest_pos; + } } /** @@ -420,6 +460,7 @@ static void __init longhaul_setup_voltagescaling(void) union msr_longhaul longhaul; struct mV_pos minvid, maxvid; unsigned int j, speed, pos, kHz_step, numvscales; + int min_vid_speed; rdmsrl(MSR_VIA_LONGHAUL, longhaul.val); if (!(longhaul.bits.RevisionID & 1)) { @@ -439,8 +480,6 @@ static void __init longhaul_setup_voltagescaling(void) minvid = vrm_mV_table[longhaul.bits.MinimumVID]; maxvid = vrm_mV_table[longhaul.bits.MaximumVID]; - numvscales = maxvid.pos - minvid.pos + 1; - kHz_step = (highest_speed - lowest_speed) / numvscales; if (minvid.mV == 0 || maxvid.mV == 0 || minvid.mV > maxvid.mV) { printk (KERN_INFO PFX "Bogus values Min:%d.%03d Max:%d.%03d. " @@ -456,20 +495,58 @@ static void __init longhaul_setup_voltagescaling(void) return; } - printk(KERN_INFO PFX "Max VID=%d.%03d Min VID=%d.%03d, %d possible voltage scales\n", + /* How many voltage steps */ + numvscales = maxvid.pos - minvid.pos + 1; + printk(KERN_INFO PFX + "Max VID=%d.%03d " + "Min VID=%d.%03d, " + "%d possible voltage scales\n", maxvid.mV/1000, maxvid.mV%1000, minvid.mV/1000, minvid.mV%1000, numvscales); - + + /* Calculate max frequency at min voltage */ + j = longhaul.bits.MinMHzBR; + if (longhaul.bits.MinMHzBR4) + j += 16; + min_vid_speed = eblcr_table[j]; + if (min_vid_speed == -1) + return; + switch (longhaul.bits.MinMHzFSB) { + case 0: + min_vid_speed *= 13333; + break; + case 1: + min_vid_speed *= 10000; + break; + case 3: + min_vid_speed *= 6666; + break; + default: + return; + break; + } + if (min_vid_speed >= highest_speed) + return; + /* Calculate kHz for one voltage step */ + kHz_step = (highest_speed - min_vid_speed) / numvscales; + j = 0; while (longhaul_table[j].frequency != CPUFREQ_TABLE_END) { speed = longhaul_table[j].frequency; - pos = (speed - lowest_speed) / kHz_step + minvid.pos; + if (speed > min_vid_speed) + pos = (speed - min_vid_speed) / kHz_step + minvid.pos; + else + pos = minvid.pos; f_msr_table[longhaul_table[j].index].vrm = mV_vrm_table[pos]; + f_msr_table[longhaul_table[j].index].pos = pos; j++; } + longhaul_pos = maxvid.pos; can_scale_voltage = 1; + printk(KERN_INFO PFX "Voltage scaling enabled. " + "Use of \"conservative\" governor is highly recommended.\n"); } -- cgit v1.2.3 From cf69eab231bb748b5c34912412a8fc8c763bcf57 Mon Sep 17 00:00:00 2001 From: Fabio Massimo Di Nitto Date: Wed, 20 Dec 2006 09:22:28 -0800 Subject: [SPARC64]: Add obppath sysfs attribute for SBUS and PCI devices. Signed-off-by: Fabio Massimo Di Nitto Signed-off-by: David S. Miller --- arch/sparc64/kernel/pci_common.c | 25 ++++++++++++++++++++++++- 1 file changed, 24 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/pci_common.c b/arch/sparc64/kernel/pci_common.c index 827ae30aa497..5a92cb90ebe0 100644 --- a/arch/sparc64/kernel/pci_common.c +++ b/arch/sparc64/kernel/pci_common.c @@ -7,6 +7,8 @@ #include #include #include +#include +#include #include #include @@ -129,6 +131,20 @@ static void __init fixup_obp_assignments(struct pci_dev *pdev, } } +static ssize_t +show_pciobppath_attr(struct device * dev, struct device_attribute * attr, char * buf) +{ + struct pci_dev *pdev; + struct pcidev_cookie *sysdata; + + pdev = to_pci_dev(dev); + sysdata = pdev->sysdata; + + return snprintf (buf, PAGE_SIZE, "%s\n", sysdata->prom_node->full_name); +} + +static DEVICE_ATTR(obppath, S_IRUSR | S_IRGRP | S_IROTH, show_pciobppath_attr, NULL); + /* Fill in the PCI device cookie sysdata for the given * PCI device. This cookie is the means by which one * can get to OBP and PCI controller specific information @@ -142,7 +158,7 @@ static void __init pdev_cookie_fillin(struct pci_pbm_info *pbm, struct pcidev_cookie *pcp; struct device_node *dp; struct property *prop; - int nregs, len; + int nregs, len, err; dp = find_device_prom_node(pbm, pdev, bus_node, &pregs, &nregs); @@ -215,6 +231,13 @@ static void __init pdev_cookie_fillin(struct pci_pbm_info *pbm, fixup_obp_assignments(pdev, pcp); pdev->sysdata = pcp; + + /* we don't really care if we can create this file or not, + * but we need to assign the result of the call or the world will fall + * under alien invasion and everybody will be frozen on a spaceship + * ready to be eaten on alpha centauri by some green and jelly humanoid. + */ + err = sysfs_create_file(&pdev->dev.kobj, &dev_attr_obppath.attr); } void __init pci_fill_in_pbm_cookies(struct pci_bus *pbus, -- cgit v1.2.3 From 68c921869491c119142612fa5796c9f8b4e9970b Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 29 Jan 2007 12:12:28 -0800 Subject: [SPARC64] IRQ: Use irq_desc->chip_data instead of irq_desc->handler_data Otherwise we can't use the generic MSI code. Furthermore, properly use the {get,set}_irq_foo() abstracted interfaces instead of direct accesses to irq_desc[]->foo. Signed-off-by: David S. Miller --- arch/sparc64/kernel/irq.c | 44 ++++++++++++++++++++------------------------ 1 file changed, 20 insertions(+), 24 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c index c3d068c7a412..2873835e2626 100644 --- a/arch/sparc64/kernel/irq.c +++ b/arch/sparc64/kernel/irq.c @@ -268,8 +268,7 @@ static int irq_choose_cpu(unsigned int virt_irq) static void sun4u_irq_enable(unsigned int virt_irq) { - irq_desc_t *desc = irq_desc + virt_irq; - struct irq_handler_data *data = desc->handler_data; + struct irq_handler_data *data = get_irq_chip_data(virt_irq); if (likely(data)) { unsigned long cpuid, imap; @@ -286,8 +285,7 @@ static void sun4u_irq_enable(unsigned int virt_irq) static void sun4u_irq_disable(unsigned int virt_irq) { - irq_desc_t *desc = irq_desc + virt_irq; - struct irq_handler_data *data = desc->handler_data; + struct irq_handler_data *data = get_irq_chip_data(virt_irq); if (likely(data)) { unsigned long imap = data->imap; @@ -300,8 +298,7 @@ static void sun4u_irq_disable(unsigned int virt_irq) static void sun4u_irq_end(unsigned int virt_irq) { - irq_desc_t *desc = irq_desc + virt_irq; - struct irq_handler_data *data = desc->handler_data; + struct irq_handler_data *data = get_irq_chip_data(virt_irq); if (likely(data)) upa_writel(ICLR_IDLE, data->iclr); @@ -362,8 +359,7 @@ static void sun4v_irq_end(unsigned int virt_irq) static void run_pre_handler(unsigned int virt_irq) { struct ino_bucket *bucket = virt_irq_to_bucket(virt_irq); - irq_desc_t *desc = irq_desc + virt_irq; - struct irq_handler_data *data = desc->handler_data; + struct irq_handler_data *data = get_irq_chip_data(virt_irq); if (likely(data->pre_handler)) { data->pre_handler(__irq_ino(__irq(bucket)), @@ -406,26 +402,27 @@ void irq_install_pre_handler(int virt_irq, void (*func)(unsigned int, void *, void *), void *arg1, void *arg2) { - irq_desc_t *desc = irq_desc + virt_irq; - struct irq_handler_data *data = desc->handler_data; + struct irq_handler_data *data = get_irq_chip_data(virt_irq); + struct irq_chip *chip; data->pre_handler = func; data->pre_handler_arg1 = arg1; data->pre_handler_arg2 = arg2; - if (desc->chip == &sun4u_irq_ack || - desc->chip == &sun4v_irq_ack) + chip = get_irq_chip(virt_irq); + if (chip == &sun4u_irq_ack || + chip == &sun4v_irq_ack) return; - desc->chip = (desc->chip == &sun4u_irq ? - &sun4u_irq_ack : &sun4v_irq_ack); + chip = (chip == &sun4u_irq ? + &sun4u_irq_ack : &sun4v_irq_ack); + set_irq_chip(virt_irq, chip); } unsigned int build_irq(int inofixup, unsigned long iclr, unsigned long imap) { struct ino_bucket *bucket; struct irq_handler_data *data; - irq_desc_t *desc; int ino; BUG_ON(tlb_type == hypervisor); @@ -434,11 +431,11 @@ unsigned int build_irq(int inofixup, unsigned long iclr, unsigned long imap) bucket = &ivector_table[ino]; if (!bucket->virt_irq) { bucket->virt_irq = virt_irq_alloc(__irq(bucket)); - irq_desc[bucket->virt_irq].chip = &sun4u_irq; + set_irq_chip(bucket->virt_irq, &sun4u_irq); } - desc = irq_desc + bucket->virt_irq; - if (unlikely(desc->handler_data)) + data = get_irq_chip_data(bucket->virt_irq); + if (unlikely(data)) goto out; data = kzalloc(sizeof(struct irq_handler_data), GFP_ATOMIC); @@ -446,7 +443,7 @@ unsigned int build_irq(int inofixup, unsigned long iclr, unsigned long imap) prom_printf("IRQ: kzalloc(irq_handler_data) failed.\n"); prom_halt(); } - desc->handler_data = data; + set_irq_chip_data(bucket->virt_irq, data); data->imap = imap; data->iclr = iclr; @@ -460,7 +457,6 @@ unsigned int sun4v_build_irq(u32 devhandle, unsigned int devino) struct ino_bucket *bucket; struct irq_handler_data *data; unsigned long sysino; - irq_desc_t *desc; BUG_ON(tlb_type != hypervisor); @@ -468,11 +464,11 @@ unsigned int sun4v_build_irq(u32 devhandle, unsigned int devino) bucket = &ivector_table[sysino]; if (!bucket->virt_irq) { bucket->virt_irq = virt_irq_alloc(__irq(bucket)); - irq_desc[bucket->virt_irq].chip = &sun4v_irq; + set_irq_chip(bucket->virt_irq, &sun4v_irq); } - desc = irq_desc + bucket->virt_irq; - if (unlikely(desc->handler_data)) + data = get_irq_chip_data(bucket->virt_irq); + if (unlikely(data)) goto out; data = kzalloc(sizeof(struct irq_handler_data), GFP_ATOMIC); @@ -480,7 +476,7 @@ unsigned int sun4v_build_irq(u32 devhandle, unsigned int devino) prom_printf("IRQ: kzalloc(irq_handler_data) failed.\n"); prom_halt(); } - desc->handler_data = data; + set_irq_chip_data(bucket->virt_irq, data); /* Catch accidental accesses to these things. IMAP/ICLR handling * is done by hypervisor calls on sun4v platforms, not by direct -- cgit v1.2.3 From 35a17eb6a87c9ceb0d35dcb51f464fe6faf584ab Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sat, 10 Feb 2007 17:41:02 -0800 Subject: [SPARC64]: Add PCI MSI support on Niagara. This is kind of hokey, we could use the hardware provided facilities much better. MSIs are assosciated with MSI Queues. MSI Queues generate interrupts when any MSI assosciated with it is signalled. This suggests a two-tiered IRQ dispatch scheme: MSI Queue interrupt --> queue interrupt handler MSI dispatch --> driver interrupt handler But we just get one-level under Linux currently. What I'd like to do is possibly stick the IRQ actions into a per-MSI-Queue data structure, and dispatch them form there, but the generic IRQ layer doesn't provide a way to do that right now. So, the current kludge is to "ACK" the interrupt by processing the MSI Queue data structures and ACK'ing them, then we run the actual handler like normal. We are wasting a lot of useful information, for example the MSI data and address are provided with ever MSI, as well as a system tick if available. If we could pass this into the IRQ handler it could help with certain things, in particular for PCI-Express error messages. The MSI entries on sparc64 also tell you exactly which bus/device/fn sent the MSI, which would be great for error handling when no registered IRQ handler can service the interrupt. We override the disable/enable IRQ chip methods in sun4v_msi, so we have to call {mask,unmask}_msi_irq() directly from there. This is another ugly wart. Signed-off-by: David S. Miller --- arch/sparc64/kernel/irq.c | 104 ++++++++- arch/sparc64/kernel/pci.c | 35 +++ arch/sparc64/kernel/pci_sun4v.c | 444 ++++++++++++++++++++++++++++++++++++ arch/sparc64/kernel/pci_sun4v.h | 61 +++++ arch/sparc64/kernel/pci_sun4v_asm.S | 266 +++++++++++++++++++++ 5 files changed, 901 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c index 2873835e2626..b5ff3ee5ace1 100644 --- a/arch/sparc64/kernel/irq.c +++ b/arch/sparc64/kernel/irq.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include @@ -87,7 +88,6 @@ struct ino_bucket ivector_table[NUM_IVECS] __attribute__ ((aligned (SMP_CACHE_BY #define irq_work(__cpu) &(trap_block[(__cpu)].irq_worklist) static unsigned int virt_to_real_irq_table[NR_IRQS]; -static unsigned char virt_irq_cur = 1; static unsigned char virt_irq_alloc(unsigned int real_irq) { @@ -95,26 +95,32 @@ static unsigned char virt_irq_alloc(unsigned int real_irq) BUILD_BUG_ON(NR_IRQS >= 256); - ent = virt_irq_cur; + for (ent = 1; ent < NR_IRQS; ent++) { + if (!virt_to_real_irq_table[ent]) + break; + } if (ent >= NR_IRQS) { printk(KERN_ERR "IRQ: Out of virtual IRQs.\n"); return 0; } - virt_irq_cur = ent + 1; virt_to_real_irq_table[ent] = real_irq; return ent; } -#if 0 /* Currently unused. */ -static unsigned char real_to_virt_irq(unsigned int real_irq) +static void virt_irq_free(unsigned int virt_irq) { - struct ino_bucket *bucket = __bucket(real_irq); + unsigned int real_irq; - return bucket->virt_irq; + if (virt_irq >= NR_IRQS) + return; + + real_irq = virt_to_real_irq_table[virt_irq]; + virt_to_real_irq_table[virt_irq] = 0; + + __bucket(real_irq)->virt_irq = 0; } -#endif static unsigned int virt_to_real_irq(unsigned char virt_irq) { @@ -341,6 +347,20 @@ static void sun4v_irq_disable(unsigned int virt_irq) } } +#ifdef CONFIG_PCI_MSI +static void sun4v_msi_enable(unsigned int virt_irq) +{ + sun4v_irq_enable(virt_irq); + unmask_msi_irq(virt_irq); +} + +static void sun4v_msi_disable(unsigned int virt_irq) +{ + mask_msi_irq(virt_irq); + sun4v_irq_disable(virt_irq); +} +#endif + static void sun4v_irq_end(unsigned int virt_irq) { struct ino_bucket *bucket = virt_irq_to_bucket(virt_irq); @@ -398,6 +418,18 @@ static struct irq_chip sun4v_irq_ack = { .end = sun4v_irq_end, }; +#ifdef CONFIG_PCI_MSI +static struct irq_chip sun4v_msi = { + .typename = "sun4v+msi", + .mask = mask_msi_irq, + .unmask = unmask_msi_irq, + .enable = sun4v_msi_enable, + .disable = sun4v_msi_disable, + .ack = run_pre_handler, + .end = sun4v_irq_end, +}; +#endif + void irq_install_pre_handler(int virt_irq, void (*func)(unsigned int, void *, void *), void *arg1, void *arg2) @@ -411,7 +443,11 @@ void irq_install_pre_handler(int virt_irq, chip = get_irq_chip(virt_irq); if (chip == &sun4u_irq_ack || - chip == &sun4v_irq_ack) + chip == &sun4v_irq_ack +#ifdef CONFIG_PCI_MSI + || chip == &sun4v_msi +#endif + ) return; chip = (chip == &sun4u_irq ? @@ -489,6 +525,56 @@ out: return bucket->virt_irq; } +#ifdef CONFIG_PCI_MSI +unsigned int sun4v_build_msi(u32 devhandle, unsigned int *virt_irq_p, + unsigned int msi_start, unsigned int msi_end) +{ + struct ino_bucket *bucket; + struct irq_handler_data *data; + unsigned long sysino; + unsigned int devino; + + BUG_ON(tlb_type != hypervisor); + + /* Find a free devino in the given range. */ + for (devino = msi_start; devino < msi_end; devino++) { + sysino = sun4v_devino_to_sysino(devhandle, devino); + bucket = &ivector_table[sysino]; + if (!bucket->virt_irq) + break; + } + if (devino >= msi_end) + return 0; + + sysino = sun4v_devino_to_sysino(devhandle, devino); + bucket = &ivector_table[sysino]; + bucket->virt_irq = virt_irq_alloc(__irq(bucket)); + *virt_irq_p = bucket->virt_irq; + set_irq_chip(bucket->virt_irq, &sun4v_msi); + + data = get_irq_chip_data(bucket->virt_irq); + if (unlikely(data)) + return devino; + + data = kzalloc(sizeof(struct irq_handler_data), GFP_ATOMIC); + if (unlikely(!data)) { + prom_printf("IRQ: kzalloc(irq_handler_data) failed.\n"); + prom_halt(); + } + set_irq_chip_data(bucket->virt_irq, data); + + data->imap = ~0UL; + data->iclr = ~0UL; + + return devino; +} + +void sun4v_destroy_msi(unsigned int virt_irq) +{ + virt_irq_free(virt_irq); +} +#endif + void ack_bad_irq(unsigned int virt_irq) { struct ino_bucket *bucket = virt_irq_to_bucket(virt_irq); diff --git a/arch/sparc64/kernel/pci.c b/arch/sparc64/kernel/pci.c index dfc41cd4bb5d..6b740eb6fe7e 100644 --- a/arch/sparc64/kernel/pci.c +++ b/arch/sparc64/kernel/pci.c @@ -13,6 +13,8 @@ #include #include #include +#include +#include #include #include @@ -646,4 +648,37 @@ int pci_domain_nr(struct pci_bus *pbus) } EXPORT_SYMBOL(pci_domain_nr); +#ifdef CONFIG_PCI_MSI +int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc) +{ + struct pcidev_cookie *pcp = pdev->sysdata; + struct pci_pbm_info *pbm = pcp->pbm; + struct pci_controller_info *p = pbm->parent; + int virt_irq, err; + + if (!pbm->msi_num || !p->setup_msi_irq) + return -EINVAL; + + err = p->setup_msi_irq(&virt_irq, pdev, desc); + if (err < 0) + return err; + + return virt_irq; +} + +void arch_teardown_msi_irq(unsigned int virt_irq) +{ + struct msi_desc *entry = get_irq_data(virt_irq); + struct pci_dev *pdev = entry->dev; + struct pcidev_cookie *pcp = pdev->sysdata; + struct pci_pbm_info *pbm = pcp->pbm; + struct pci_controller_info *p = pbm->parent; + + if (!pbm->msi_num || !p->setup_msi_irq) + return; + + return p->teardown_msi_irq(virt_irq, pdev); +} +#endif /* !(CONFIG_PCI_MSI) */ + #endif /* !(CONFIG_PCI) */ diff --git a/arch/sparc64/kernel/pci_sun4v.c b/arch/sparc64/kernel/pci_sun4v.c index 6b04794b7a97..ec22cd61ec8c 100644 --- a/arch/sparc64/kernel/pci_sun4v.c +++ b/arch/sparc64/kernel/pci_sun4v.c @@ -10,6 +10,8 @@ #include #include #include +#include +#include #include #include @@ -1074,6 +1076,443 @@ static void pci_sun4v_get_bus_range(struct pci_pbm_info *pbm) } +#ifdef CONFIG_PCI_MSI +struct pci_sun4v_msiq_entry { + u64 version_type; +#define MSIQ_VERSION_MASK 0xffffffff00000000UL +#define MSIQ_VERSION_SHIFT 32 +#define MSIQ_TYPE_MASK 0x00000000000000ffUL +#define MSIQ_TYPE_SHIFT 0 +#define MSIQ_TYPE_NONE 0x00 +#define MSIQ_TYPE_MSG 0x01 +#define MSIQ_TYPE_MSI32 0x02 +#define MSIQ_TYPE_MSI64 0x03 +#define MSIQ_TYPE_INTX 0x08 +#define MSIQ_TYPE_NONE2 0xff + + u64 intx_sysino; + u64 reserved1; + u64 stick; + u64 req_id; /* bus/device/func */ +#define MSIQ_REQID_BUS_MASK 0xff00UL +#define MSIQ_REQID_BUS_SHIFT 8 +#define MSIQ_REQID_DEVICE_MASK 0x00f8UL +#define MSIQ_REQID_DEVICE_SHIFT 3 +#define MSIQ_REQID_FUNC_MASK 0x0007UL +#define MSIQ_REQID_FUNC_SHIFT 0 + + u64 msi_address; + + /* The format of this value is message type dependant. + * For MSI bits 15:0 are the data from the MSI packet. + * For MSI-X bits 31:0 are the data from the MSI packet. + * For MSG, the message code and message routing code where: + * bits 39:32 is the bus/device/fn of the msg target-id + * bits 18:16 is the message routing code + * bits 7:0 is the message code + * For INTx the low order 2-bits are: + * 00 - INTA + * 01 - INTB + * 10 - INTC + * 11 - INTD + */ + u64 msi_data; + + u64 reserved2; +}; + +/* For now this just runs as a pre-handler for the real interrupt handler. + * So we just walk through the queue and ACK all the entries, update the + * head pointer, and return. + * + * In the longer term it would be nice to do something more integrated + * wherein we can pass in some of this MSI info to the drivers. This + * would be most useful for PCIe fabric error messages, although we could + * invoke those directly from the loop here in order to pass the info around. + */ +static void pci_sun4v_msi_prehandler(unsigned int ino, void *data1, void *data2) +{ + struct pci_pbm_info *pbm = data1; + struct pci_sun4v_msiq_entry *base, *ep; + unsigned long msiqid, orig_head, head, type, err; + + msiqid = (unsigned long) data2; + + head = 0xdeadbeef; + err = pci_sun4v_msiq_gethead(pbm->devhandle, msiqid, &head); + if (unlikely(err)) + goto hv_error_get; + + if (unlikely(head >= (pbm->msiq_ent_count * sizeof(struct pci_sun4v_msiq_entry)))) + goto bad_offset; + + head /= sizeof(struct pci_sun4v_msiq_entry); + orig_head = head; + base = (pbm->msi_queues + ((msiqid - pbm->msiq_first) * + (pbm->msiq_ent_count * + sizeof(struct pci_sun4v_msiq_entry)))); + ep = &base[head]; + while ((ep->version_type & MSIQ_TYPE_MASK) != 0) { + type = (ep->version_type & MSIQ_TYPE_MASK) >> MSIQ_TYPE_SHIFT; + if (unlikely(type != MSIQ_TYPE_MSI32 && + type != MSIQ_TYPE_MSI64)) + goto bad_type; + + pci_sun4v_msi_setstate(pbm->devhandle, + ep->msi_data /* msi_num */, + HV_MSISTATE_IDLE); + + /* Clear the entry. */ + ep->version_type &= ~MSIQ_TYPE_MASK; + + /* Go to next entry in ring. */ + head++; + if (head >= pbm->msiq_ent_count) + head = 0; + ep = &base[head]; + } + + if (likely(head != orig_head)) { + /* ACK entries by updating head pointer. */ + head *= sizeof(struct pci_sun4v_msiq_entry); + err = pci_sun4v_msiq_sethead(pbm->devhandle, msiqid, head); + if (unlikely(err)) + goto hv_error_set; + } + return; + +hv_error_set: + printk(KERN_EMERG "MSI: Hypervisor set head gives error %lu\n", err); + goto hv_error_cont; + +hv_error_get: + printk(KERN_EMERG "MSI: Hypervisor get head gives error %lu\n", err); + +hv_error_cont: + printk(KERN_EMERG "MSI: devhandle[%x] msiqid[%lx] head[%lu]\n", + pbm->devhandle, msiqid, head); + return; + +bad_offset: + printk(KERN_EMERG "MSI: Hypervisor gives bad offset %lx max(%lx)\n", + head, pbm->msiq_ent_count * sizeof(struct pci_sun4v_msiq_entry)); + return; + +bad_type: + printk(KERN_EMERG "MSI: Entry has bad type %lx\n", type); + return; +} + +static int msi_bitmap_alloc(struct pci_pbm_info *pbm) +{ + unsigned long size, bits_per_ulong; + + bits_per_ulong = sizeof(unsigned long) * 8; + size = (pbm->msi_num + (bits_per_ulong - 1)) & ~(bits_per_ulong - 1); + size /= 8; + BUG_ON(size % sizeof(unsigned long)); + + pbm->msi_bitmap = kzalloc(size, GFP_KERNEL); + if (!pbm->msi_bitmap) + return -ENOMEM; + + return 0; +} + +static void msi_bitmap_free(struct pci_pbm_info *pbm) +{ + kfree(pbm->msi_bitmap); + pbm->msi_bitmap = NULL; +} + +static int msi_queue_alloc(struct pci_pbm_info *pbm) +{ + unsigned long q_size, alloc_size, pages, order; + int i; + + q_size = pbm->msiq_ent_count * sizeof(struct pci_sun4v_msiq_entry); + alloc_size = (pbm->msiq_num * q_size); + order = get_order(alloc_size); + pages = __get_free_pages(GFP_KERNEL | __GFP_COMP, order); + if (pages == 0UL) { + printk(KERN_ERR "MSI: Cannot allocate MSI queues (o=%lu).\n", + order); + return -ENOMEM; + } + memset((char *)pages, 0, PAGE_SIZE << order); + pbm->msi_queues = (void *) pages; + + for (i = 0; i < pbm->msiq_num; i++) { + unsigned long err, base = __pa(pages + (i * q_size)); + unsigned long ret1, ret2; + + err = pci_sun4v_msiq_conf(pbm->devhandle, + pbm->msiq_first + i, + base, pbm->msiq_ent_count); + if (err) { + printk(KERN_ERR "MSI: msiq register fails (err=%lu)\n", + err); + goto h_error; + } + + err = pci_sun4v_msiq_info(pbm->devhandle, + pbm->msiq_first + i, + &ret1, &ret2); + if (err) { + printk(KERN_ERR "MSI: Cannot read msiq (err=%lu)\n", + err); + goto h_error; + } + if (ret1 != base || ret2 != pbm->msiq_ent_count) { + printk(KERN_ERR "MSI: Bogus qconf " + "expected[%lx:%x] got[%lx:%lx]\n", + base, pbm->msiq_ent_count, + ret1, ret2); + goto h_error; + } + } + + return 0; + +h_error: + free_pages(pages, order); + return -EINVAL; +} + +static void pci_sun4v_msi_init(struct pci_pbm_info *pbm) +{ + u32 *val; + int len; + + val = of_get_property(pbm->prom_node, "#msi-eqs", &len); + if (!val || len != 4) + goto no_msi; + pbm->msiq_num = *val; + if (pbm->msiq_num) { + struct msiq_prop { + u32 first_msiq; + u32 num_msiq; + u32 first_devino; + } *mqp; + struct msi_range_prop { + u32 first_msi; + u32 num_msi; + } *mrng; + struct addr_range_prop { + u32 msi32_high; + u32 msi32_low; + u32 msi32_len; + u32 msi64_high; + u32 msi64_low; + u32 msi64_len; + } *arng; + + val = of_get_property(pbm->prom_node, "msi-eq-size", &len); + if (!val || len != 4) + goto no_msi; + + pbm->msiq_ent_count = *val; + + mqp = of_get_property(pbm->prom_node, + "msi-eq-to-devino", &len); + if (!mqp || len != sizeof(struct msiq_prop)) + goto no_msi; + + pbm->msiq_first = mqp->first_msiq; + pbm->msiq_first_devino = mqp->first_devino; + + val = of_get_property(pbm->prom_node, "#msi", &len); + if (!val || len != 4) + goto no_msi; + pbm->msi_num = *val; + + mrng = of_get_property(pbm->prom_node, "msi-ranges", &len); + if (!mrng || len != sizeof(struct msi_range_prop)) + goto no_msi; + pbm->msi_first = mrng->first_msi; + + val = of_get_property(pbm->prom_node, "msi-data-mask", &len); + if (!val || len != 4) + goto no_msi; + pbm->msi_data_mask = *val; + + val = of_get_property(pbm->prom_node, "msix-data-width", &len); + if (!val || len != 4) + goto no_msi; + pbm->msix_data_width = *val; + + arng = of_get_property(pbm->prom_node, "msi-address-ranges", + &len); + if (!arng || len != sizeof(struct addr_range_prop)) + goto no_msi; + pbm->msi32_start = ((u64)arng->msi32_high << 32) | + (u64) arng->msi32_low; + pbm->msi64_start = ((u64)arng->msi64_high << 32) | + (u64) arng->msi64_low; + pbm->msi32_len = arng->msi32_len; + pbm->msi64_len = arng->msi64_len; + + if (msi_bitmap_alloc(pbm)) + goto no_msi; + + if (msi_queue_alloc(pbm)) { + msi_bitmap_free(pbm); + goto no_msi; + } + + printk(KERN_INFO "%s: MSI Queue first[%u] num[%u] count[%u] " + "devino[0x%x]\n", + pbm->name, + pbm->msiq_first, pbm->msiq_num, + pbm->msiq_ent_count, + pbm->msiq_first_devino); + printk(KERN_INFO "%s: MSI first[%u] num[%u] mask[0x%x] " + "width[%u]\n", + pbm->name, + pbm->msi_first, pbm->msi_num, pbm->msi_data_mask, + pbm->msix_data_width); + printk(KERN_INFO "%s: MSI addr32[0x%lx:0x%x] " + "addr64[0x%lx:0x%x]\n", + pbm->name, + pbm->msi32_start, pbm->msi32_len, + pbm->msi64_start, pbm->msi64_len); + printk(KERN_INFO "%s: MSI queues at RA [%p]\n", + pbm->name, + pbm->msi_queues); + } + + return; + +no_msi: + pbm->msiq_num = 0; + printk(KERN_INFO "%s: No MSI support.\n", pbm->name); +} + +static int alloc_msi(struct pci_pbm_info *pbm) +{ + int i; + + for (i = 0; i < pbm->msi_num; i++) { + if (!test_and_set_bit(i, pbm->msi_bitmap)) + return i + pbm->msi_first; + } + + return -ENOENT; +} + +static void free_msi(struct pci_pbm_info *pbm, int msi_num) +{ + msi_num -= pbm->msi_first; + clear_bit(msi_num, pbm->msi_bitmap); +} + +static int pci_sun4v_setup_msi_irq(unsigned int *virt_irq_p, + struct pci_dev *pdev, + struct msi_desc *entry) +{ + struct pcidev_cookie *pcp = pdev->sysdata; + struct pci_pbm_info *pbm = pcp->pbm; + unsigned long devino, msiqid; + struct msi_msg msg; + int msi_num, err; + + *virt_irq_p = 0; + + msi_num = alloc_msi(pbm); + if (msi_num < 0) + return msi_num; + + devino = sun4v_build_msi(pbm->devhandle, virt_irq_p, + pbm->msiq_first_devino, + (pbm->msiq_first_devino + + pbm->msiq_num)); + err = -ENOMEM; + if (!devino) + goto out_err; + + set_irq_msi(*virt_irq_p, entry); + + msiqid = ((devino - pbm->msiq_first_devino) + + pbm->msiq_first); + + err = -EINVAL; + if (pci_sun4v_msiq_setstate(pbm->devhandle, msiqid, HV_MSIQSTATE_IDLE)) + if (err) + goto out_err; + + if (pci_sun4v_msiq_setvalid(pbm->devhandle, msiqid, HV_MSIQ_VALID)) + goto out_err; + + if (pci_sun4v_msi_setmsiq(pbm->devhandle, + msi_num, msiqid, + (entry->msi_attrib.is_64 ? + HV_MSITYPE_MSI64 : HV_MSITYPE_MSI32))) + goto out_err; + + if (pci_sun4v_msi_setstate(pbm->devhandle, msi_num, HV_MSISTATE_IDLE)) + goto out_err; + + if (pci_sun4v_msi_setvalid(pbm->devhandle, msi_num, HV_MSIVALID_VALID)) + goto out_err; + + pcp->msi_num = msi_num; + + if (entry->msi_attrib.is_64) { + msg.address_hi = pbm->msi64_start >> 32; + msg.address_lo = pbm->msi64_start & 0xffffffff; + } else { + msg.address_hi = 0; + msg.address_lo = pbm->msi32_start; + } + msg.data = msi_num; + write_msi_msg(*virt_irq_p, &msg); + + irq_install_pre_handler(*virt_irq_p, + pci_sun4v_msi_prehandler, + pbm, (void *) msiqid); + + return 0; + +out_err: + free_msi(pbm, msi_num); + sun4v_destroy_msi(*virt_irq_p); + *virt_irq_p = 0; + return err; + +} + +static void pci_sun4v_teardown_msi_irq(unsigned int virt_irq, + struct pci_dev *pdev) +{ + struct pcidev_cookie *pcp = pdev->sysdata; + struct pci_pbm_info *pbm = pcp->pbm; + unsigned long msiqid, err; + unsigned int msi_num; + + msi_num = pcp->msi_num; + err = pci_sun4v_msi_getmsiq(pbm->devhandle, msi_num, &msiqid); + if (err) { + printk(KERN_ERR "%s: getmsiq gives error %lu\n", + pbm->name, err); + return; + } + + pci_sun4v_msi_setvalid(pbm->devhandle, msi_num, HV_MSIVALID_INVALID); + pci_sun4v_msiq_setvalid(pbm->devhandle, msiqid, HV_MSIQ_INVALID); + + free_msi(pbm, msi_num); + + /* The sun4v_destroy_msi() will liberate the devino and thus the MSIQ + * allocation. + */ + sun4v_destroy_msi(virt_irq); +} +#else /* CONFIG_PCI_MSI */ +static void pci_sun4v_msi_init(struct pci_pbm_info *pbm) +{ +} +#endif /* !(CONFIG_PCI_MSI) */ + static void pci_sun4v_pbm_init(struct pci_controller_info *p, struct device_node *dp, u32 devhandle) { struct pci_pbm_info *pbm; @@ -1119,6 +1558,7 @@ static void pci_sun4v_pbm_init(struct pci_controller_info *p, struct device_node pci_sun4v_get_bus_range(pbm); pci_sun4v_iommu_init(pbm); + pci_sun4v_msi_init(pbm); pdev_htab_populate(pbm); } @@ -1187,6 +1627,10 @@ void sun4v_pci_init(struct device_node *dp, char *model_name) p->scan_bus = pci_sun4v_scan_bus; p->base_address_update = pci_sun4v_base_address_update; p->resource_adjust = pci_sun4v_resource_adjust; +#ifdef CONFIG_PCI_MSI + p->setup_msi_irq = pci_sun4v_setup_msi_irq; + p->teardown_msi_irq = pci_sun4v_teardown_msi_irq; +#endif p->pci_ops = &pci_sun4v_ops; /* Like PSYCHO and SCHIZO we have a 2GB aligned area diff --git a/arch/sparc64/kernel/pci_sun4v.h b/arch/sparc64/kernel/pci_sun4v.h index 884d25f6158d..8e9fc3a5b4f5 100644 --- a/arch/sparc64/kernel/pci_sun4v.h +++ b/arch/sparc64/kernel/pci_sun4v.h @@ -28,4 +28,65 @@ extern int pci_sun4v_config_put(unsigned long devhandle, unsigned long size, unsigned long data); +extern unsigned long pci_sun4v_msiq_conf(unsigned long devhandle, + unsigned long msiqid, + unsigned long msiq_paddr, + unsigned long num_entries); +extern unsigned long pci_sun4v_msiq_info(unsigned long devhandle, + unsigned long msiqid, + unsigned long *msiq_paddr, + unsigned long *num_entries); +extern unsigned long pci_sun4v_msiq_getvalid(unsigned long devhandle, + unsigned long msiqid, + unsigned long *valid); +extern unsigned long pci_sun4v_msiq_setvalid(unsigned long devhandle, + unsigned long msiqid, + unsigned long valid); +extern unsigned long pci_sun4v_msiq_getstate(unsigned long devhandle, + unsigned long msiqid, + unsigned long *state); +extern unsigned long pci_sun4v_msiq_setstate(unsigned long devhandle, + unsigned long msiqid, + unsigned long state); +extern unsigned long pci_sun4v_msiq_gethead(unsigned long devhandle, + unsigned long msiqid, + unsigned long *head); +extern unsigned long pci_sun4v_msiq_sethead(unsigned long devhandle, + unsigned long msiqid, + unsigned long head); +extern unsigned long pci_sun4v_msiq_gettail(unsigned long devhandle, + unsigned long msiqid, + unsigned long *head); +extern unsigned long pci_sun4v_msi_getvalid(unsigned long devhandle, + unsigned long msinum, + unsigned long *valid); +extern unsigned long pci_sun4v_msi_setvalid(unsigned long devhandle, + unsigned long msinum, + unsigned long valid); +extern unsigned long pci_sun4v_msi_getmsiq(unsigned long devhandle, + unsigned long msinum, + unsigned long *msiq); +extern unsigned long pci_sun4v_msi_setmsiq(unsigned long devhandle, + unsigned long msinum, + unsigned long msiq, + unsigned long msitype); +extern unsigned long pci_sun4v_msi_getstate(unsigned long devhandle, + unsigned long msinum, + unsigned long *state); +extern unsigned long pci_sun4v_msi_setstate(unsigned long devhandle, + unsigned long msinum, + unsigned long state); +extern unsigned long pci_sun4v_msg_getmsiq(unsigned long devhandle, + unsigned long msinum, + unsigned long *msiq); +extern unsigned long pci_sun4v_msg_setmsiq(unsigned long devhandle, + unsigned long msinum, + unsigned long msiq); +extern unsigned long pci_sun4v_msg_getvalid(unsigned long devhandle, + unsigned long msinum, + unsigned long *valid); +extern unsigned long pci_sun4v_msg_setvalid(unsigned long devhandle, + unsigned long msinum, + unsigned long valid); + #endif /* !(_PCI_SUN4V_H) */ diff --git a/arch/sparc64/kernel/pci_sun4v_asm.S b/arch/sparc64/kernel/pci_sun4v_asm.S index 6604fdbf746c..ecb81f389b06 100644 --- a/arch/sparc64/kernel/pci_sun4v_asm.S +++ b/arch/sparc64/kernel/pci_sun4v_asm.S @@ -93,3 +93,269 @@ pci_sun4v_config_put: mov -1, %o1 1: retl mov %o1, %o0 + + /* %o0: devhandle + * %o1: msiqid + * %o2: msiq phys address + * %o3: num entries + * + * returns %o0: status + * + * status will be zero if the operation completed + * successfully, else -1 if not + */ + .globl pci_sun4v_msiq_conf +pci_sun4v_msiq_conf: + mov HV_FAST_PCI_MSIQ_CONF, %o5 + ta HV_FAST_TRAP + retl + mov %o0, %o0 + + /* %o0: devhandle + * %o1: msiqid + * %o2: &msiq_phys_addr + * %o3: &msiq_num_entries + * + * returns %o0: status + */ + .globl pci_sun4v_msiq_info +pci_sun4v_msiq_info: + mov %o2, %o4 + mov HV_FAST_PCI_MSIQ_INFO, %o5 + ta HV_FAST_TRAP + stx %o1, [%o4] + stx %o2, [%o3] + retl + mov %o0, %o0 + + /* %o0: devhandle + * %o1: msiqid + * %o2: &valid + * + * returns %o0: status + */ + .globl pci_sun4v_msiq_getvalid +pci_sun4v_msiq_getvalid: + mov HV_FAST_PCI_MSIQ_GETVALID, %o5 + ta HV_FAST_TRAP + stx %o1, [%o2] + retl + mov %o0, %o0 + + /* %o0: devhandle + * %o1: msiqid + * %o2: valid + * + * returns %o0: status + */ + .globl pci_sun4v_msiq_setvalid +pci_sun4v_msiq_setvalid: + mov HV_FAST_PCI_MSIQ_SETVALID, %o5 + ta HV_FAST_TRAP + retl + mov %o0, %o0 + + /* %o0: devhandle + * %o1: msiqid + * %o2: &state + * + * returns %o0: status + */ + .globl pci_sun4v_msiq_getstate +pci_sun4v_msiq_getstate: + mov HV_FAST_PCI_MSIQ_GETSTATE, %o5 + ta HV_FAST_TRAP + stx %o1, [%o2] + retl + mov %o0, %o0 + + /* %o0: devhandle + * %o1: msiqid + * %o2: state + * + * returns %o0: status + */ + .globl pci_sun4v_msiq_setstate +pci_sun4v_msiq_setstate: + mov HV_FAST_PCI_MSIQ_SETSTATE, %o5 + ta HV_FAST_TRAP + retl + mov %o0, %o0 + + /* %o0: devhandle + * %o1: msiqid + * %o2: &head + * + * returns %o0: status + */ + .globl pci_sun4v_msiq_gethead +pci_sun4v_msiq_gethead: + mov HV_FAST_PCI_MSIQ_GETHEAD, %o5 + ta HV_FAST_TRAP + stx %o1, [%o2] + retl + mov %o0, %o0 + + /* %o0: devhandle + * %o1: msiqid + * %o2: head + * + * returns %o0: status + */ + .globl pci_sun4v_msiq_sethead +pci_sun4v_msiq_sethead: + mov HV_FAST_PCI_MSIQ_SETHEAD, %o5 + ta HV_FAST_TRAP + retl + mov %o0, %o0 + + /* %o0: devhandle + * %o1: msiqid + * %o2: &tail + * + * returns %o0: status + */ + .globl pci_sun4v_msiq_gettail +pci_sun4v_msiq_gettail: + mov HV_FAST_PCI_MSIQ_GETTAIL, %o5 + ta HV_FAST_TRAP + stx %o1, [%o2] + retl + mov %o0, %o0 + + /* %o0: devhandle + * %o1: msinum + * %o2: &valid + * + * returns %o0: status + */ + .globl pci_sun4v_msi_getvalid +pci_sun4v_msi_getvalid: + mov HV_FAST_PCI_MSI_GETVALID, %o5 + ta HV_FAST_TRAP + stx %o1, [%o2] + retl + mov %o0, %o0 + + /* %o0: devhandle + * %o1: msinum + * %o2: valid + * + * returns %o0: status + */ + .globl pci_sun4v_msi_setvalid +pci_sun4v_msi_setvalid: + mov HV_FAST_PCI_MSI_SETVALID, %o5 + ta HV_FAST_TRAP + retl + mov %o0, %o0 + + /* %o0: devhandle + * %o1: msinum + * %o2: &msiq + * + * returns %o0: status + */ + .globl pci_sun4v_msi_getmsiq +pci_sun4v_msi_getmsiq: + mov HV_FAST_PCI_MSI_GETMSIQ, %o5 + ta HV_FAST_TRAP + stx %o1, [%o2] + retl + mov %o0, %o0 + + /* %o0: devhandle + * %o1: msinum + * %o2: msitype + * %o3: msiq + * + * returns %o0: status + */ + .globl pci_sun4v_msi_setmsiq +pci_sun4v_msi_setmsiq: + mov HV_FAST_PCI_MSI_SETMSIQ, %o5 + ta HV_FAST_TRAP + retl + mov %o0, %o0 + + /* %o0: devhandle + * %o1: msinum + * %o2: &state + * + * returns %o0: status + */ + .globl pci_sun4v_msi_getstate +pci_sun4v_msi_getstate: + mov HV_FAST_PCI_MSI_GETSTATE, %o5 + ta HV_FAST_TRAP + stx %o1, [%o2] + retl + mov %o0, %o0 + + /* %o0: devhandle + * %o1: msinum + * %o2: state + * + * returns %o0: status + */ + .globl pci_sun4v_msi_setstate +pci_sun4v_msi_setstate: + mov HV_FAST_PCI_MSI_SETSTATE, %o5 + ta HV_FAST_TRAP + retl + mov %o0, %o0 + + /* %o0: devhandle + * %o1: msinum + * %o2: &msiq + * + * returns %o0: status + */ + .globl pci_sun4v_msg_getmsiq +pci_sun4v_msg_getmsiq: + mov HV_FAST_PCI_MSG_GETMSIQ, %o5 + ta HV_FAST_TRAP + stx %o1, [%o2] + retl + mov %o0, %o0 + + /* %o0: devhandle + * %o1: msinum + * %o2: msiq + * + * returns %o0: status + */ + .globl pci_sun4v_msg_setmsiq +pci_sun4v_msg_setmsiq: + mov HV_FAST_PCI_MSG_SETMSIQ, %o5 + ta HV_FAST_TRAP + retl + mov %o0, %o0 + + /* %o0: devhandle + * %o1: msinum + * %o2: &valid + * + * returns %o0: status + */ + .globl pci_sun4v_msg_getvalid +pci_sun4v_msg_getvalid: + mov HV_FAST_PCI_MSG_GETVALID, %o5 + ta HV_FAST_TRAP + stx %o1, [%o2] + retl + mov %o0, %o0 + + /* %o0: devhandle + * %o1: msinum + * %o2: valid + * + * returns %o0: status + */ + .globl pci_sun4v_msg_setvalid +pci_sun4v_msg_setvalid: + mov HV_FAST_PCI_MSG_SETVALID, %o5 + ta HV_FAST_TRAP + retl + mov %o0, %o0 + -- cgit v1.2.3 From 784020fb950741cbb7390c6b622321da626fb1e8 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sat, 10 Feb 2007 23:28:13 -0800 Subject: [SPARC64]: Update defconfig. Signed-off-by: David S. Miller --- arch/sparc64/defconfig | 41 ++++++++++++++++++++++++++++++++++------- 1 file changed, 34 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/defconfig b/arch/sparc64/defconfig index 5a9e68b13e60..069ee3ccd849 100644 --- a/arch/sparc64/defconfig +++ b/arch/sparc64/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20-rc2 -# Thu Dec 28 15:09:49 2006 +# Linux kernel version: 2.6.20 +# Sat Feb 10 23:08:12 2007 # CONFIG_SPARC=y CONFIG_SPARC64=y @@ -151,7 +151,7 @@ CONFIG_SUN_AUXIO=y CONFIG_SUN_IO=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y -# CONFIG_PCI_MULTITHREAD_PROBE is not set +CONFIG_PCI_MSI=y # CONFIG_PCI_DEBUG is not set CONFIG_SUN_OPENPROMFS=m CONFIG_SPARC32_COMPAT=y @@ -182,7 +182,9 @@ CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=m +CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set @@ -300,6 +302,7 @@ CONFIG_STANDALONE=y # CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # @@ -393,6 +396,7 @@ CONFIG_BLK_DEV_ALI15X3=y # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8213 is not set # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set @@ -402,6 +406,7 @@ CONFIG_BLK_DEV_ALI15X3=y # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_BLK_DEV_TC86C001 is not set # CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set @@ -579,6 +584,7 @@ CONFIG_NET_PCI=y # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_VIA_RHINE is not set +# CONFIG_SC92031 is not set # # Ethernet (1000 Mbit) @@ -601,11 +607,13 @@ CONFIG_E1000_NAPI=y CONFIG_TIGON3=m CONFIG_BNX2=m # CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set # # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set @@ -627,8 +635,17 @@ CONFIG_BNX2=m # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set -# CONFIG_PPP is not set +CONFIG_PPP=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_MPPE=m +CONFIG_PPPOE=m # CONFIG_SLIP is not set +CONFIG_SLHC=m # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set @@ -1042,6 +1059,11 @@ CONFIG_SND_ALI5451=m CONFIG_SND_SUN_CS4231=m # CONFIG_SND_SUN_DBRI is not set +# +# SoC audio support +# +# CONFIG_SND_SOC is not set + # # Open Sound System # @@ -1052,6 +1074,7 @@ CONFIG_AC97_BUS=m # HID Devices # CONFIG_HID=y +# CONFIG_HID_DEBUG is not set # # USB support @@ -1066,9 +1089,7 @@ CONFIG_USB=y # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_MULTITHREAD_PROBE is not set # CONFIG_USB_OTG is not set # @@ -1078,9 +1099,11 @@ CONFIG_USB_EHCI_HCD=m # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=m # CONFIG_USB_SL811_HCD is not set @@ -1132,6 +1155,7 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set +# CONFIG_USB_GTCO is not set # # USB Imaging devices @@ -1473,8 +1497,10 @@ CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_TWOFISH_COMMON=m @@ -1489,6 +1515,7 @@ CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_DEFLATE=y CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_CAMELLIA=m CONFIG_CRYPTO_TEST=m # -- cgit v1.2.3 From 96177299416dbccb73b54e6b344260154a445375 Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Sat, 10 Feb 2007 01:43:03 -0800 Subject: [PATCH] Drop free_pages() nr_free_pages is now a simple access to a global variable. Make it a macro instead of a function. The nr_free_pages now requires vmstat.h to be included. There is one occurrence in power management where we need to add the include. Directly refrer to global_page_state() there to clarify why the #include was added. [akpm@osdl.org: arm build fix] [akpm@osdl.org: sparc64 build fix] Signed-off-by: Christoph Lameter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/sparc64/mm/init.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index 054822a3e05e..09d434f41e4b 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -416,7 +416,7 @@ void show_mem(void) printk("Free swap: %6ldkB\n", nr_swap_pages << (PAGE_SHIFT-10)); printk("%ld pages of RAM\n", num_physpages); - printk("%d free pages\n", nr_free_pages()); + printk("%lu free pages\n", nr_free_pages()); } void mmu_info(struct seq_file *m) @@ -1593,7 +1593,7 @@ void __init mem_init(void) initpages = (((unsigned long) __init_end) - ((unsigned long) __init_begin)); initpages = PAGE_ALIGN(initpages) >> PAGE_SHIFT; - printk("Memory: %uk available (%ldk kernel code, %ldk data, %ldk init) [%016lx,%016lx]\n", + printk("Memory: %luk available (%ldk kernel code, %ldk data, %ldk init) [%016lx,%016lx]\n", nr_free_pages() << (PAGE_SHIFT-10), codepages << (PAGE_SHIFT-10), datapages << (PAGE_SHIFT-10), -- cgit v1.2.3 From 9195481d2f869a2707a272057f3f8664fd277534 Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Sat, 10 Feb 2007 01:43:04 -0800 Subject: [PATCH] Drop nr_free_pages_pgdat() Function is unnecessary now. We can use the summing features of the ZVCs to get the values we need. Signed-off-by: Christoph Lameter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ia64/mm/init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c index faaca21a3718..760dda4d5b6e 100644 --- a/arch/ia64/mm/init.c +++ b/arch/ia64/mm/init.c @@ -68,7 +68,7 @@ max_pgt_pages(void) #ifndef CONFIG_NUMA node_free_pages = nr_free_pages(); #else - node_free_pages = nr_free_pages_pgdat(NODE_DATA(numa_node_id())); + node_free_pages = node_page_state(numa_node_id(), NR_FREE_PAGES); #endif max_pgt_pages = node_free_pages / PGT_FRACTION_OF_NODE_MEM; max_pgt_pages = max(max_pgt_pages, MIN_PGT_PAGES); -- cgit v1.2.3 From 66701b1499a3ff11882c8c4aef36e8eac86e17b1 Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Sat, 10 Feb 2007 01:43:09 -0800 Subject: [PATCH] optional ZONE_DMA: introduce CONFIG_ZONE_DMA This patch simply defines CONFIG_ZONE_DMA for all arches. We later do special things with CONFIG_ZONE_DMA after the VM and an arch are prepared to work without ZONE_DMA. CONFIG_ZONE_DMA can be defined in two ways depending on how an architecture handles ISA DMA. First if CONFIG_GENERIC_ISA_DMA is set by the arch then we know that the arch needs ZONE_DMA because ISA DMA devices are supported. We can catch this in mm/Kconfig and do not need to modify arch code. Second, arches may use ZONE_DMA in an unknown way. We set CONFIG_ZONE_DMA for all arches that do not set CONFIG_GENERIC_ISA_DMA in order to insure backwards compatibility. The arches may later undefine ZONE_DMA if their arch code has been verified to not depend on ZONE_DMA. Signed-off-by: Christoph Lameter Cc: Andi Kleen Cc: "Luck, Tony" Cc: Kyle McMartin Cc: Matthew Wilcox Cc: James Bottomley Cc: Paul Mundt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/cris/Kconfig | 4 ++++ arch/frv/Kconfig | 4 ++++ arch/h8300/Kconfig | 4 ++++ arch/ia64/Kconfig | 4 ++++ arch/m68knommu/Kconfig | 4 ++++ arch/s390/Kconfig | 4 ++++ arch/v850/Kconfig | 3 +++ arch/xtensa/Kconfig | 4 ++++ 8 files changed, 31 insertions(+) (limited to 'arch') diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig index 3474309e049c..e3db1427dbe5 100644 --- a/arch/cris/Kconfig +++ b/arch/cris/Kconfig @@ -9,6 +9,10 @@ config MMU bool default y +config ZONE_DMA + bool + default y + config RWSEM_GENERIC_SPINLOCK bool default y diff --git a/arch/frv/Kconfig b/arch/frv/Kconfig index 7561d7b72e75..cea237413aa2 100644 --- a/arch/frv/Kconfig +++ b/arch/frv/Kconfig @@ -6,6 +6,10 @@ config FRV bool default y +config ZONE_DMA + bool + default y + config RWSEM_GENERIC_SPINLOCK bool default y diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig index 34a84bc4baf5..146eb28f6225 100644 --- a/arch/h8300/Kconfig +++ b/arch/h8300/Kconfig @@ -17,6 +17,10 @@ config SWAP bool default n +config ZONE_DMA + bool + default y + config FPU bool default n diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index f1d2899e9a62..549ead597934 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -24,6 +24,10 @@ config 64BIT bool default y +config ZONE_DMA + bool + default y + config MMU bool default y diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig index 25993c2a8fbb..c5fc5406dad0 100644 --- a/arch/m68knommu/Kconfig +++ b/arch/m68knommu/Kconfig @@ -17,6 +17,10 @@ config FPU bool default n +config ZONE_DMA + bool + default y + config RWSEM_GENERIC_SPINLOCK bool default y diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index eaed402ad346..c64973004261 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -7,6 +7,10 @@ config MMU bool default y +config ZONE_DMA + bool + default y + config LOCKDEP_SUPPORT bool default y diff --git a/arch/v850/Kconfig b/arch/v850/Kconfig index f0d4d72e560f..dbfab8fc9b49 100644 --- a/arch/v850/Kconfig +++ b/arch/v850/Kconfig @@ -10,6 +10,9 @@ mainmenu "uClinux/v850 (w/o MMU) Kernel Configuration" config MMU bool default n +config ZONE_DMA + bool + default y config RWSEM_GENERIC_SPINLOCK bool default y diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig index 2e74cb0b7807..7c99d518e49e 100644 --- a/arch/xtensa/Kconfig +++ b/arch/xtensa/Kconfig @@ -7,6 +7,10 @@ config FRAME_POINTER bool default n +config ZONE_DMA + bool + default y + config XTENSA bool default y -- cgit v1.2.3 From 09ae1f585e9def652cdb1d0484611d4f4dc2d5fd Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Sat, 10 Feb 2007 01:43:11 -0800 Subject: [PATCH] optional ZONE_DMA: optional ZONE_DMA for ia64 ZONE_DMA less operation for IA64 SGI platform Disable ZONE_DMA for SGI SN2. All memory is addressable by all devices and we do not need any special memory pool. Signed-off-by: Christoph Lameter Cc: "Luck, Tony" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ia64/Kconfig | 4 ++-- arch/ia64/mm/contig.c | 4 +++- arch/ia64/mm/discontig.c | 6 ++++++ 3 files changed, 11 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 549ead597934..db185f34e341 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -25,8 +25,8 @@ config 64BIT default y config ZONE_DMA - bool - default y + def_bool y + depends on !IA64_SGI_SN2 config MMU bool diff --git a/arch/ia64/mm/contig.c b/arch/ia64/mm/contig.c index 63e6d49c5813..ca4d41e5f177 100644 --- a/arch/ia64/mm/contig.c +++ b/arch/ia64/mm/contig.c @@ -259,9 +259,11 @@ paging_init (void) num_physpages = 0; efi_memmap_walk(count_pages, &num_physpages); - max_dma = virt_to_phys((void *) MAX_DMA_ADDRESS) >> PAGE_SHIFT; memset(max_zone_pfns, 0, sizeof(max_zone_pfns)); +#ifdef CONFIG_ZONE_DMA + max_dma = virt_to_phys((void *) MAX_DMA_ADDRESS) >> PAGE_SHIFT; max_zone_pfns[ZONE_DMA] = max_dma; +#endif max_zone_pfns[ZONE_NORMAL] = max_low_pfn; #ifdef CONFIG_VIRTUAL_MEM_MAP diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c index 6eae596c509d..16835108bb5b 100644 --- a/arch/ia64/mm/discontig.c +++ b/arch/ia64/mm/discontig.c @@ -37,7 +37,9 @@ struct early_node_data { unsigned long pernode_size; struct bootmem_data bootmem_data; unsigned long num_physpages; +#ifdef CONFIG_ZONE_DMA unsigned long num_dma_physpages; +#endif unsigned long min_pfn; unsigned long max_pfn; }; @@ -633,9 +635,11 @@ static __init int count_node_pages(unsigned long start, unsigned long len, int n unsigned long end = start + len; mem_data[node].num_physpages += len >> PAGE_SHIFT; +#ifdef CONFIG_ZONE_DMA if (start <= __pa(MAX_DMA_ADDRESS)) mem_data[node].num_dma_physpages += (min(end, __pa(MAX_DMA_ADDRESS)) - start) >>PAGE_SHIFT; +#endif start = GRANULEROUNDDOWN(start); start = ORDERROUNDDOWN(start); end = GRANULEROUNDUP(end); @@ -688,7 +692,9 @@ void __init paging_init(void) } memset(max_zone_pfns, 0, sizeof(max_zone_pfns)); +#ifdef CONFIG_ZONE_DMA max_zone_pfns[ZONE_DMA] = max_dma; +#endif max_zone_pfns[ZONE_NORMAL] = max_pfn; free_area_init_nodes(max_zone_pfns); -- cgit v1.2.3 From 005928374bf339e0b6783d78da8fd0701631e7ee Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Sat, 10 Feb 2007 01:43:12 -0800 Subject: [PATCH] optional ZONE_DMA: remove ZONE_DMA remains from parisc Remove ZONE_DMA remains from parisc so that kernels are build without ZONE_DMA. Signed-off-by: Christoph Lameter Cc: Kyle McMartin Cc: Matthew Wilcox Cc: James Bottomley Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/parisc/Kconfig | 3 --- arch/parisc/mm/init.c | 4 +--- 2 files changed, 1 insertion(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index 0f9ff618c6d7..28da4e71c443 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig @@ -50,9 +50,6 @@ config TIME_LOW_RES depends on SMP default y -config GENERIC_ISA_DMA - bool - config GENERIC_HARDIRQS def_bool y diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c index 0667f2b4f977..0c118e584e73 100644 --- a/arch/parisc/mm/init.c +++ b/arch/parisc/mm/init.c @@ -808,9 +808,7 @@ void __init paging_init(void) for (i = 0; i < npmem_ranges; i++) { unsigned long zones_size[MAX_NR_ZONES] = { 0, }; - /* We have an IOMMU, so all memory can go into a single - ZONE_DMA zone. */ - zones_size[ZONE_DMA] = pmem_ranges[i].pages; + zones_size[ZONE_NORMAL] = pmem_ranges[i].pages; #ifdef CONFIG_DISCONTIGMEM /* Need to initialize the pfnnid_map before we can initialize -- cgit v1.2.3 From 339ba9b15df58199b9783a23af234e947ec9e6ba Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Sat, 10 Feb 2007 01:43:13 -0800 Subject: [PATCH] optional ZONE_DMA: remove ZONE_DMA remains from sh/sh64 sh / sh64: Remove ZONE_DMA remains. Both arches do not need ZONE_DMA Signed-off-by: Paul Mundt Signed-off-by: Christoph Lameter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/sh/mm/init.c | 17 +---------------- arch/sh64/Kconfig | 3 --- arch/sh64/mm/init.c | 5 +---- 3 files changed, 2 insertions(+), 23 deletions(-) (limited to 'arch') diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c index 29bd37b1488e..bf0c263cb6fd 100644 --- a/arch/sh/mm/init.c +++ b/arch/sh/mm/init.c @@ -158,7 +158,6 @@ void __init paging_init(void) * Setup some defaults for the zone sizes.. these should be safe * regardless of distcontiguous memory or MMU settings. */ - zones_size[ZONE_DMA] = 0 >> PAGE_SHIFT; zones_size[ZONE_NORMAL] = __MEMORY_SIZE >> PAGE_SHIFT; #ifdef CONFIG_HIGHMEM zones_size[ZONE_HIGHMEM] = 0 >> PAGE_SHIFT; @@ -170,8 +169,6 @@ void __init paging_init(void) * the zone sizes accordingly, in addition to turning it on. */ { - unsigned long max_dma, low, start_pfn; - /* We don't need to map the kernel through the TLB, as * it is permanatly mapped using P1. So clear the * entire pgd. */ @@ -179,19 +176,7 @@ void __init paging_init(void) /* Turn on the MMU */ enable_mmu(); - - /* Fixup the zone sizes */ - start_pfn = START_PFN; - max_dma = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT; - low = MAX_LOW_PFN; - - if (low < max_dma) { - zones_size[ZONE_DMA] = low - start_pfn; - zones_size[ZONE_NORMAL] = 0; - } else { - zones_size[ZONE_DMA] = max_dma - start_pfn; - zones_size[ZONE_NORMAL] = low - max_dma; - } + zones_size[ZONE_NORMAL] = MAX_LOW_PFN - START_PFN; } /* Set an initial value for the MMU.TTB so we don't have to diff --git a/arch/sh64/Kconfig b/arch/sh64/Kconfig index 7bc0744b7ab6..e14b533558c8 100644 --- a/arch/sh64/Kconfig +++ b/arch/sh64/Kconfig @@ -36,9 +36,6 @@ config GENERIC_CALIBRATE_DELAY config RWSEM_XCHGADD_ALGORITHM bool -config GENERIC_ISA_DMA - bool - config ARCH_HAS_ILOG2_U32 bool default n diff --git a/arch/sh64/mm/init.c b/arch/sh64/mm/init.c index 83295bd21aa7..5dc08787259c 100644 --- a/arch/sh64/mm/init.c +++ b/arch/sh64/mm/init.c @@ -118,10 +118,7 @@ void __init paging_init(void) mmu_context_cache = MMU_CONTEXT_FIRST_VERSION; - /* - * All memory is good as ZONE_NORMAL (fall-through) and ZONE_DMA. - */ - zones_size[ZONE_DMA] = MAX_LOW_PFN - START_PFN; + zones_size[ZONE_NORMAL] = MAX_LOW_PFN - START_PFN; NODE_DATA(0)->node_mem_map = NULL; free_area_init_node(0, NODE_DATA(0), zones_size, __MEMORY_START >> PAGE_SHIFT, 0); } -- cgit v1.2.3 From 5ac6da669e2476dbdac89b357b05b5a79bc5b657 Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Sat, 10 Feb 2007 01:43:14 -0800 Subject: [PATCH] Set CONFIG_ZONE_DMA for arches with GENERIC_ISA_DMA As Andi pointed out: CONFIG_GENERIC_ISA_DMA only disables the ISA DMA channel management. Other functionality may still expect GFP_DMA to provide memory below 16M. So we need to make sure that CONFIG_ZONE_DMA is set independent of CONFIG_GENERIC_ISA_DMA. Undo the modifications to mm/Kconfig where we made ZONE_DMA dependent on GENERIC_ISA_DMA and set theses explicitly in each arches Kconfig. Reviews must occur for each arch in order to determine if ZONE_DMA can be switched off. It can only be switched off if we know that all devices supported by a platform are capable of performing DMA transfers to all of memory (Some arches already support this: uml, avr32, sh sh64, parisc and IA64/Altix). In order to switch ZONE_DMA off conditionally, one would have to establish a scheme by which one can assure that no drivers are enabled that are only capable of doing I/O to a part of memory, or one needs to provide an alternate means of performing an allocation from a specific range of memory (like provided by alloc_pages_range()) and insure that all drivers use that call. In that case the arches alloc_dma_coherent() may need to be modified to call alloc_pages_range() instead of relying on GFP_DMA. Signed-off-by: Christoph Lameter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/alpha/Kconfig | 4 ++++ arch/arm/Kconfig | 4 ++++ arch/arm26/Kconfig | 4 ++++ arch/i386/Kconfig | 4 ++++ arch/m32r/Kconfig | 4 ++++ arch/m68k/Kconfig | 4 ++++ arch/mips/Kconfig | 4 ++++ arch/powerpc/Kconfig | 4 ++++ arch/ppc/Kconfig | 4 ++++ arch/sparc/Kconfig | 4 ++++ arch/sparc64/Kconfig | 4 ++++ arch/x86_64/Kconfig | 4 ++++ 12 files changed, 48 insertions(+) (limited to 'arch') diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index 84caf50725b5..770f717bd250 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -41,6 +41,10 @@ config GENERIC_CALIBRATE_DELAY bool default y +config ZONE_DMA + bool + default y + config GENERIC_ISA_DMA bool default y diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 1523046e092b..fbf4b2a62b60 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -100,6 +100,10 @@ config GENERIC_BUST_SPINLOCK config ARCH_MAY_HAVE_PC_FDC bool +config ZONE_DMA + bool + default y + config GENERIC_ISA_DMA bool diff --git a/arch/arm26/Kconfig b/arch/arm26/Kconfig index 74eba8b5a8ca..989113dce415 100644 --- a/arch/arm26/Kconfig +++ b/arch/arm26/Kconfig @@ -60,6 +60,10 @@ config GENERIC_CALIBRATE_DELAY config GENERIC_BUST_SPINLOCK bool +config ZONE_DMA + bool + default y + config GENERIC_ISA_DMA bool diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig index 0dfee812811a..63d5e841caf5 100644 --- a/arch/i386/Kconfig +++ b/arch/i386/Kconfig @@ -38,6 +38,10 @@ config MMU bool default y +config ZONE_DMA + bool + default y + config SBUS bool diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig index f383dab973f5..565d0138078e 100644 --- a/arch/m32r/Kconfig +++ b/arch/m32r/Kconfig @@ -16,6 +16,10 @@ config GENERIC_ISA_DMA bool default y +config ZONE_DMA + bool + default y + config GENERIC_HARDIRQS bool default y diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 70a577c89c7c..0bffbe6e7e11 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -439,6 +439,10 @@ config GENERIC_ISA_DMA depends on Q40 || AMIGA_PCMCIA || GG2 default y +config ZONE_DMA + bool + default y + source "drivers/pci/Kconfig" source "drivers/zorro/Kconfig" diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 9d839a9c4b1a..1bc6d249be44 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -8,6 +8,10 @@ mainmenu "Linux/MIPS Kernel Configuration" menu "Machine selection" +config ZONE_DMA + bool + default y + choice prompt "System type" default SGI_IP22 diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index f08e80a0bf0a..0088c5ebca78 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -977,6 +977,10 @@ config ISA have an IBM RS/6000 or pSeries machine or a PReP machine, say Y. If you have an embedded board, consult your board documentation. +config ZONE_DMA + bool + default y + config GENERIC_ISA_DMA bool depends on PPC64 || POWER4 || 6xx && !CPM2 diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig index c22e60619d9b..0df9c33629fd 100644 --- a/arch/ppc/Kconfig +++ b/arch/ppc/Kconfig @@ -1177,6 +1177,10 @@ config ISA have an IBM RS/6000 or pSeries machine or a PReP machine, say Y. If you have an embedded board, consult your board documentation. +config ZONE_DMA + bool + default y + config GENERIC_ISA_DMA bool depends on 6xx && !CPM2 diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index d0dec1ea2eed..bd992c0048f0 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -13,6 +13,10 @@ config HIGHMEM bool default y +config ZONE_DMA + bool + default y + config GENERIC_ISA_DMA bool default y diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig index d41f66ac7fff..fb84647dbf3d 100644 --- a/arch/sparc64/Kconfig +++ b/arch/sparc64/Kconfig @@ -232,6 +232,10 @@ config LARGE_ALLOCS source "mm/Kconfig" +config ZONE_DMA + bool + default y + config GENERIC_ISA_DMA bool default y diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig index d4275537b25b..02dd39457bcf 100644 --- a/arch/x86_64/Kconfig +++ b/arch/x86_64/Kconfig @@ -44,6 +44,10 @@ config MMU bool default y +config ZONE_DMA + bool + default y + config ISA bool -- cgit v1.2.3 From c1725f2af89f1eda3cb9007290971b55084569a4 Mon Sep 17 00:00:00 2001 From: "Ahmed S. Darwish" Date: Sat, 10 Feb 2007 01:43:29 -0800 Subject: [PATCH] ARM26: Use ARRAY_SIZE macro when appropriate Use ARRAY_SIZE macro already defined in linux/kernel.h Signed-off-by: Ahmed S. Darwish Acked-by: Ian Molton Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/arm26/kernel/ecard.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm26/kernel/ecard.c b/arch/arm26/kernel/ecard.c index 9dbc17247c6f..e2bcefc91cc3 100644 --- a/arch/arm26/kernel/ecard.c +++ b/arch/arm26/kernel/ecard.c @@ -665,7 +665,7 @@ ecard_probe(int slot, card_type_t type) ec->fiqmask = 4; } - for (i = 0; i < sizeof(blacklist) / sizeof(*blacklist); i++) + for (i = 0; i < ARRAY_SIZE(blacklist); i++) if (blacklist[i].manufacturer == ec->cid.manufacturer && blacklist[i].product == ec->cid.product) { ec->card_desc = blacklist[i].type; -- cgit v1.2.3 From 9674dcf795a4c7384e4e42c8f38fcb87517b1a43 Mon Sep 17 00:00:00 2001 From: Hirokazu Takata Date: Sat, 10 Feb 2007 01:43:35 -0800 Subject: [PATCH] m32r: build fix for processors without ISA_DSP_LEVEL2 Additional fixes for processors without ISA_DSP_LEVEL2. sigcontext_t does not have dummy_acc1h, dummy_acc1l members any longer. Signed-off-by: Hirokazu Takata Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/m32r/kernel/process.c | 2 +- arch/m32r/kernel/signal.c | 26 ++++---------------------- 2 files changed, 5 insertions(+), 23 deletions(-) (limited to 'arch') diff --git a/arch/m32r/kernel/process.c b/arch/m32r/kernel/process.c index 44cbe0ce0f8f..a689e2978b6e 100644 --- a/arch/m32r/kernel/process.c +++ b/arch/m32r/kernel/process.c @@ -174,7 +174,7 @@ void show_regs(struct pt_regs * regs) regs->acc1h, regs->acc1l); #elif defined(CONFIG_ISA_M32R2) || defined(CONFIG_ISA_M32R) printk("ACCH[%08lx]:ACCL[%08lx]\n", \ - regs->acch, regs->accl); + regs->acc0h, regs->acc0l); #else #error unknown isa configuration #endif diff --git a/arch/m32r/kernel/signal.c b/arch/m32r/kernel/signal.c index 092ea86bb079..4b156054baa6 100644 --- a/arch/m32r/kernel/signal.c +++ b/arch/m32r/kernel/signal.c @@ -109,19 +109,10 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, COPY(r10); COPY(r11); COPY(r12); -#if defined(CONFIG_ISA_M32R2) && defined(CONFIG_ISA_DSP_LEVEL2) COPY(acc0h); COPY(acc0l); - COPY(acc1h); - COPY(acc1l); -#elif defined(CONFIG_ISA_M32R2) || defined(CONFIG_ISA_M32R) - COPY(acch); - COPY(accl); - COPY(dummy_acc1h); - COPY(dummy_acc1l); -#else -#error unknown isa configuration -#endif + COPY(acc1h); /* ISA_DSP_LEVEL2 only */ + COPY(acc1l); /* ISA_DSP_LEVEL2 only */ COPY(psw); COPY(bpc); COPY(bbpsw); @@ -196,19 +187,10 @@ setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, COPY(r10); COPY(r11); COPY(r12); -#if defined(CONFIG_ISA_M32R2) && defined(CONFIG_ISA_DSP_LEVEL2) COPY(acc0h); COPY(acc0l); - COPY(acc1h); - COPY(acc1l); -#elif defined(CONFIG_ISA_M32R2) || defined(CONFIG_ISA_M32R) - COPY(acch); - COPY(accl); - COPY(dummy_acc1h); - COPY(dummy_acc1l); -#else -#error unknown isa configuration -#endif + COPY(acc1h); /* ISA_DSP_LEVEL2 only */ + COPY(acc1l); /* ISA_DSP_LEVEL2 only */ COPY(psw); COPY(bpc); COPY(bbpsw); -- cgit v1.2.3 From 9b87ed790714bd3a8d492feb24f6c48f8bb59c3a Mon Sep 17 00:00:00 2001 From: Hirokazu Takata Date: Sat, 10 Feb 2007 01:43:37 -0800 Subject: [PATCH] m32r: fix do_page_fault and update_mmu_cache Fix do_page_fault and update_mmu_cache. * Fix do_page_fault (vmalloc_fault:) to pass error_code correctly to update_mmu_cache by using a thread-fault code for all m32r chips. * Fix update_mmu_cache for OPSP chip - #ifdef CONFIG_CHIP_OPSP portion is a workaround of OPSP; Add a notfound-case operation to update_mmu_cache for OPSP like other m32r chip. - Fix pte_data that was not initialized if no entry found. Signed-off-by: Kazuhiro Inaoka Signed-off-by: Hirokazu Takata Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/m32r/mm/fault.c | 40 +++++++++++++++++++--------------------- 1 file changed, 19 insertions(+), 21 deletions(-) (limited to 'arch') diff --git a/arch/m32r/mm/fault.c b/arch/m32r/mm/fault.c index 9b9feb0f1610..fc7ccdf829e2 100644 --- a/arch/m32r/mm/fault.c +++ b/arch/m32r/mm/fault.c @@ -362,8 +362,10 @@ vmalloc_fault: if (!pte_present(*pte_k)) goto no_context; - addr = (address & PAGE_MASK) | (error_code & ACE_INSTRUCTION); + addr = (address & PAGE_MASK); + set_thread_fault_code(error_code); update_mmu_cache(NULL, addr, *pte_k); + set_thread_fault_code(0); return; } } @@ -377,7 +379,7 @@ vmalloc_fault: void update_mmu_cache(struct vm_area_struct *vma, unsigned long vaddr, pte_t pte) { - unsigned long *entry1, *entry2; + volatile unsigned long *entry1, *entry2; unsigned long pte_data, flags; unsigned int *entry_dat; int inst = get_thread_fault_code() & ACE_INSTRUCTION; @@ -391,30 +393,26 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long vaddr, vaddr = (vaddr & PAGE_MASK) | get_asid(); + pte_data = pte_val(pte); + #ifdef CONFIG_CHIP_OPSP entry1 = (unsigned long *)ITLB_BASE; - for(i = 0 ; i < NR_TLB_ENTRIES; i++) { - if(*entry1++ == vaddr) { - pte_data = pte_val(pte); - set_tlb_data(entry1, pte_data); - break; - } - entry1++; + for (i = 0; i < NR_TLB_ENTRIES; i++) { + if (*entry1++ == vaddr) { + set_tlb_data(entry1, pte_data); + break; + } + entry1++; } entry2 = (unsigned long *)DTLB_BASE; - for(i = 0 ; i < NR_TLB_ENTRIES ; i++) { - if(*entry2++ == vaddr) { - pte_data = pte_val(pte); - set_tlb_data(entry2, pte_data); - break; - } - entry2++; + for (i = 0; i < NR_TLB_ENTRIES; i++) { + if (*entry2++ == vaddr) { + set_tlb_data(entry2, pte_data); + break; + } + entry2++; } - local_irq_restore(flags); - return; #else - pte_data = pte_val(pte); - /* * Update TLB entries * entry1: ITLB entry address @@ -439,6 +437,7 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long vaddr, "i" (MSVA_offset), "i" (MTOP_offset), "i" (MIDXI_offset) : "r4", "memory" ); +#endif if ((!inst && entry2 >= DTLB_END) || (inst && entry1 >= ITLB_END)) goto notfound; @@ -482,7 +481,6 @@ notfound: set_tlb_data(entry1, pte_data); goto found; -#endif } /*======================================================================* -- cgit v1.2.3 From 4aa3b3ccfc6abda052a1bbd9cf018d51c1689836 Mon Sep 17 00:00:00 2001 From: Hirokazu Takata Date: Sat, 10 Feb 2007 01:43:37 -0800 Subject: [PATCH] m32r: update defconfig files for v2.6.19 This patch upgrades defconfig files for all m32r platforms. Signed-off-by: Hirokazu Takata Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/m32r/defconfig | 525 ++++++++++++------ arch/m32r/m32104ut/defconfig.m32104ut | 752 ++++++++++++++++++++----- arch/m32r/m32700ut/defconfig.m32700ut.smp | 519 ++++++++++++------ arch/m32r/m32700ut/defconfig.m32700ut.up | 516 ++++++++++++----- arch/m32r/mappi/defconfig.nommu | 366 +++++++++---- arch/m32r/mappi/defconfig.smp | 382 +++++++++---- arch/m32r/mappi/defconfig.up | 380 +++++++++---- arch/m32r/mappi2/defconfig.opsp | 883 ++++++++++++++++++++++++++++++ arch/m32r/mappi2/defconfig.vdec2 | 388 +++++++++---- arch/m32r/mappi3/defconfig.smp | 373 +++++++++---- arch/m32r/oaks32r/defconfig.nommu | 348 ++++++++---- arch/m32r/opsput/defconfig.opsput | 383 +++++++++---- 12 files changed, 4433 insertions(+), 1382 deletions(-) create mode 100644 arch/m32r/mappi2/defconfig.opsp (limited to 'arch') diff --git a/arch/m32r/defconfig b/arch/m32r/defconfig index 853093093168..13579917afef 100644 --- a/arch/m32r/defconfig +++ b/arch/m32r/defconfig @@ -1,20 +1,18 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc5 -# Fri Jun 3 16:20:11 2005 +# Linux kernel version: 2.6.19 +# Tue Dec 12 17:52:38 2006 # CONFIG_M32R=y -# CONFIG_UID16 is not set CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -22,32 +20,40 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set # CONFIG_POSIX_MQUEUE is not set CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y -# CONFIG_IKCONFIG_PROC is not set +CONFIG_IKCONFIG_PROC=y +# CONFIG_CPUSETS is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -55,10 +61,29 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y +CONFIG_STOP_MACHINE=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_BLK_DEV_IO_TRACE is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" # # Processor type and features @@ -70,8 +95,10 @@ CONFIG_PLAT_M32700UT=y # CONFIG_PLAT_OAKS32R is not set # CONFIG_PLAT_MAPPI2 is not set # CONFIG_PLAT_MAPPI3 is not set +# CONFIG_PLAT_M32104UT is not set CONFIG_CHIP_M32700=y # CONFIG_CHIP_M32102 is not set +# CONFIG_CHIP_M32104 is not set # CONFIG_CHIP_VDEC2 is not set # CONFIG_CHIP_OPSP is not set CONFIG_MMU=y @@ -85,34 +112,39 @@ CONFIG_TIMER_DIVIDE=128 CONFIG_MEMORY_START=0x08000000 CONFIG_MEMORY_SIZE=0x01000000 CONFIG_NOHIGHMEM=y -# CONFIG_DISCONTIGMEM is not set +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +CONFIG_DISCONTIGMEM_MANUAL=y +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_DISCONTIGMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_NEED_MULTIPLE_NODES=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_IRAM_START=0x00f00000 +CONFIG_IRAM_SIZE=0x00080000 CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_PREEMPT=y -# CONFIG_HAVE_DEC_LOCK is not set -# CONFIG_SMP is not set +CONFIG_SMP=y +# CONFIG_CHIP_M32700_TS1 is not set +CONFIG_NR_CPUS=2 +CONFIG_NODES_SHIFT=1 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # -# CONFIG_PCI is not set # CONFIG_ISA is not set # # PCCARD (PCMCIA/CardBus) support # -CONFIG_PCCARD=y -# CONFIG_PCMCIA_DEBUG is not set -CONFIG_PCMCIA=y - -# -# PC-card bridges -# -# CONFIG_TCIC is not set -# CONFIG_M32R_PCC is not set -CONFIG_M32R_CFC=y -CONFIG_M32R_CFC_NUM=1 +# CONFIG_PCCARD is not set # # PCI Hotplug Support @@ -124,6 +156,94 @@ CONFIG_M32R_CFC_NUM=1 CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + # # Device Drivers # @@ -133,12 +253,100 @@ CONFIG_BINFMT_ELF=y # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set +CONFIG_FW_LOADER=y +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set # # Memory Technology Devices (MTD) # -# CONFIG_MTD is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_REDBOOT_PARTS=y +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 +# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set +# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +# CONFIG_MTD_CHAR is not set +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=m +CONFIG_MTD_JEDECPROBE=m +CONFIG_MTD_GEN_PROBE=m +CONFIG_MTD_CFI_ADV_OPTIONS=y +# CONFIG_MTD_CFI_NOSWAP is not set +CONFIG_MTD_CFI_BE_BYTE_SWAP=y +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +# CONFIG_MTD_CFI_I2 is not set +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=m +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=m +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set # # Parallel port support @@ -152,7 +360,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # # Block devices # -# CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set @@ -160,23 +367,21 @@ CONFIG_BLK_DEV_NBD=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_BLK_DEV_INITRD is not set -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CDROM_PKTCDVD is not set +CONFIG_ATA_OVER_ETH=m # -# IO Schedulers +# Misc devices # -CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set +# CONFIG_TIFM_CORE is not set # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # @@ -185,7 +390,6 @@ CONFIG_BLK_DEV_IDE=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECS=y CONFIG_BLK_DEV_IDECD=m # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set @@ -204,7 +408,9 @@ CONFIG_IDE_GENERIC=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set CONFIG_SCSI=m +# CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y # @@ -216,6 +422,7 @@ CONFIG_BLK_DEV_SD=m CONFIG_BLK_DEV_SR=m # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs @@ -225,26 +432,23 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_LOGGING is not set # -# SCSI Transport Attributes +# SCSI Transports # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set # # SCSI low-level drivers # -# CONFIG_SCSI_SATA is not set +# CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_DEBUG is not set # -# PCMCIA SCSI adapter support +# Serial ATA (prod) and Parallel ATA (experimental) drivers # -# CONFIG_PCMCIA_AHA152X is not set -# CONFIG_PCMCIA_FDOMAIN is not set -# CONFIG_PCMCIA_NINJA_SCSI is not set -# CONFIG_PCMCIA_QLOGIC is not set -# CONFIG_PCMCIA_SYM53C500 is not set # # Multi-device support (RAID and LVM) @@ -254,6 +458,7 @@ CONFIG_SCSI_MULTI_LUN=y # # Fusion MPT device support # +# CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support @@ -264,75 +469,19 @@ CONFIG_SCSI_MULTI_LUN=y # # -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing +# Network device support # -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# +# PHY device support +# +# CONFIG_PHYLIB is not set + # # Ethernet (10 or 100Mbit) # @@ -358,11 +507,6 @@ CONFIG_SMC91X=y # # CONFIG_NET_RADIO is not set -# -# PCMCIA network device support -# -# CONFIG_NET_PCMCIA is not set - # # Wan interfaces # @@ -371,6 +515,8 @@ CONFIG_SMC91X=y # CONFIG_SLIP is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -386,6 +532,7 @@ CONFIG_SMC91X=y # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces @@ -414,7 +561,6 @@ CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_LIBPS2 is not set # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices @@ -422,6 +568,7 @@ CONFIG_SOUND_GAMEPORT=y CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -450,8 +597,8 @@ CONFIG_LEGACY_PTY_COUNT=256 # Watchdog Cards # # CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y # CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set CONFIG_DS1302=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set @@ -459,52 +606,64 @@ CONFIG_DS1302=y # # Ftape, the floppy tape device driver # -# CONFIG_DRM is not set - -# -# PCMCIA character devices -# -# CONFIG_SYNCLINK_CS is not set # CONFIG_RAW_DRIVER is not set # # TPM devices # +# CONFIG_TCG_TPM is not set # # I2C support # # CONFIG_I2C is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # # CONFIG_W1 is not set # -# Misc devices +# Hardware Monitoring support # +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_HWMON_DEBUG_CHIP is not set # # Multimedia devices # -CONFIG_VIDEO_DEV=y +CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +CONFIG_VIDEO_V4L2=y # -# Video For Linux +# Video Capture Adapters # # -# Video Adapters +# Video Capture Adapters # +# CONFIG_VIDEO_ADV_DEBUG is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +# CONFIG_VIDEO_VIVI is not set # CONFIG_VIDEO_CPIA is not set -CONFIG_VIDEO_M32R_AR=y -CONFIG_VIDEO_M32R_AR_M64278=y +CONFIG_VIDEO_M32R_AR=m +CONFIG_VIDEO_M32R_AR_M64278=m # # Radio Adapters # -# CONFIG_RADIO_MAESTRO is not set # # Digital Video Broadcasting Devices @@ -514,15 +673,16 @@ CONFIG_VIDEO_M32R_AR_M64278=y # # Graphics support # +CONFIG_FIRMWARE_EDID=y CONFIG_FB=y -# CONFIG_FB_CFB_FILLRECT is not set -# CONFIG_FB_CFB_COPYAREA is not set -# CONFIG_FB_CFB_IMAGEBLIT is not set -# CONFIG_FB_SOFT_CURSOR is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set -# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_S1D13XXX=y # CONFIG_FB_VIRTUAL is not set # @@ -531,6 +691,7 @@ CONFIG_FB=y # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y @@ -542,6 +703,7 @@ CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_LOGO_M32R_CLUT224=y # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -554,6 +716,11 @@ CONFIG_LOGO_LINUX_CLUT224=y # # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# # # USB Gadget Support @@ -563,23 +730,62 @@ CONFIG_LOGO_LINUX_CLUT224=y # # MMC/SD Card support # -# CONFIG_MMC is not set +CONFIG_MMC=y +CONFIG_MMC_DEBUG=y +CONFIG_MMC_BLOCK=y +# CONFIG_MMC_TIFM_SD is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# # # InfiniBand support # -# CONFIG_INFINIBAND is not set + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# # # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set -CONFIG_EXT3_FS=m +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=m +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y CONFIG_JBD_DEBUG=y CONFIG_FS_MBCACHE=y CONFIG_REISERFS_FS=m @@ -587,17 +793,19 @@ CONFIG_REISERFS_FS=m # CONFIG_REISERFS_PROC_INFO is not set # CONFIG_REISERFS_FS_XATTR is not set # CONFIG_JFS_FS is not set - -# -# XFS support -# +# CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -623,15 +831,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y -CONFIG_DEVFS_FS=y -CONFIG_DEVFS_MOUNT=y -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -643,6 +849,8 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +# CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set @@ -655,12 +863,14 @@ CONFIG_RAMFS=y # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set @@ -669,6 +879,7 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -723,16 +934,23 @@ CONFIG_NLS_DEFAULT="iso8859-1" # # Profiling support # -# CONFIG_PROFILING is not set +CONFIG_PROFILING=y +CONFIG_OPROFILE=y # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 +CONFIG_LOG_BUF_SHIFT=15 # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_FS is not set # CONFIG_FRAME_POINTER is not set +# CONFIG_UNWIND_INFO is not set +# CONFIG_HEADERS_CHECK is not set # # Security options @@ -745,13 +963,10 @@ CONFIG_LOG_BUF_SHIFT=14 # # CONFIG_CRYPTO is not set -# -# Hardware crypto devices -# - # # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set diff --git a/arch/m32r/m32104ut/defconfig.m32104ut b/arch/m32r/m32104ut/defconfig.m32104ut index 454de336803a..7b68fe8d921e 100644 --- a/arch/m32r/m32104ut/defconfig.m32104ut +++ b/arch/m32r/m32104ut/defconfig.m32104ut @@ -1,20 +1,20 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14 -# Wed Nov 9 16:04:51 2005 +# Linux kernel version: 2.6.19 +# Wed Dec 13 17:22:20 2006 # CONFIG_M32R=y -# CONFIG_UID16 is not set CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 # @@ -22,33 +22,66 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -# CONFIG_KOBJECT_UEVENT is not set -# CONFIG_IKCONFIG is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" -CONFIG_EMBEDDED=y -# CONFIG_KALLSYMS is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y -# CONFIG_FUTEX is not set -# CONFIG_EPOLL is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support # -# CONFIG_MODULES is not set +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_BLK_DEV_IO_TRACE is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" # # Processor type and features @@ -70,40 +103,40 @@ CONFIG_ISA_M32R=y CONFIG_BUS_CLOCK=54000000 CONFIG_TIMER_DIVIDE=128 # CONFIG_CPU_LITTLE_ENDIAN is not set -CONFIG_MEMORY_START=04000000 -CONFIG_MEMORY_SIZE=01000000 +CONFIG_MEMORY_START=0x04000000 +CONFIG_MEMORY_SIZE=0x01000000 CONFIG_NOHIGHMEM=y -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_FLATMEM_MANUAL is not set +CONFIG_DISCONTIGMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y +CONFIG_DISCONTIGMEM=y CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_NEED_MULTIPLE_NODES=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_IRAM_START=0x00700000 +CONFIG_IRAM_SIZE=0x00010000 CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -# CONFIG_PREEMPT is not set +CONFIG_PREEMPT=y # CONFIG_SMP is not set +CONFIG_NODES_SHIFT=1 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # -# CONFIG_ISA is not set +CONFIG_ISA=y # # PCCARD (PCMCIA/CardBus) support # -CONFIG_PCCARD=y -# CONFIG_PCMCIA_DEBUG is not set -CONFIG_PCMCIA=y -CONFIG_PCMCIA_LOAD_CIS=y -CONFIG_PCMCIA_IOCTL=y - -# -# PC-card bridges -# +# CONFIG_PCCARD is not set # # PCI Hotplug Support @@ -112,10 +145,8 @@ CONFIG_PCMCIA_IOCTL=y # # Executable file formats # -CONFIG_BINFMT_FLAT=y -# CONFIG_BINFMT_ZFLAT is not set -# CONFIG_BINFMT_SHARED_FLAT is not set -# CONFIG_BINFMT_MISC is not set +# CONFIG_BINFMT_FLAT is not set +CONFIG_BINFMT_MISC=y # # Networking @@ -125,17 +156,19 @@ CONFIG_NET=y # # Networking options # -# CONFIG_PACKET is not set +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set +# CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set @@ -143,13 +176,87 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set # CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=m +# CONFIG_NF_CONNTRACK_ENABLED is not set +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +# CONFIG_NETFILTER_XT_MATCH_DSCP is not set +# CONFIG_NETFILTER_XT_MATCH_ESP is not set +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +# CONFIG_NETFILTER_XT_MATCH_POLICY is not set +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +# CONFIG_IP_NF_MATCH_AH is not set +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m # # DCCP Configuration (EXPERIMENTAL) @@ -160,6 +267,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -169,11 +281,14 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set +CONFIG_NET_CLS_ROUTE=y # # Network testing @@ -193,8 +308,8 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -# CONFIG_DEBUG_DRIVER is not set +# CONFIG_FW_LOADER is not set +# CONFIG_SYS_HYPERVISOR is not set # # Connector - unified userspace <-> kernelspace linker @@ -209,11 +324,21 @@ CONFIG_FW_LOADER=y # # Parallel port support # -# CONFIG_PARPORT is not set +CONFIG_PARPORT=m +# CONFIG_PARPORT_GSC is not set +# CONFIG_PARPORT_AX88796 is not set +CONFIG_PARPORT_1284=y # # Plug and Play support # +CONFIG_PNP=y +# CONFIG_PNP_DEBUG is not set + +# +# Protocols +# +CONFIG_ISAPNP=y # # Block devices @@ -221,37 +346,130 @@ CONFIG_FW_LOADER=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_NBD=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CDROM_PKTCDVD is not set +CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CDROM_PKTCDVD=m +CONFIG_CDROM_PKTCDVD_BUFFERS=8 +CONFIG_CDROM_PKTCDVD_WCACHE=y +# CONFIG_ATA_OVER_ETH is not set # -# IO Schedulers +# Misc devices # -CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -# CONFIG_ATA_OVER_ETH is not set +# CONFIG_TIFM_CORE is not set # # ATA/ATAPI/MFM/RLL support # -# CONFIG_IDE is not set +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_BLK_DEV_IDECD=y +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +# CONFIG_BLK_DEV_IDEPNP is not set +# CONFIG_IDE_ARM is not set +# CONFIG_IDE_CHIPSETS is not set +# CONFIG_BLK_DEV_IDEDMA is not set +# CONFIG_IDEDMA_AUTO is not set +# CONFIG_BLK_DEV_HD is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set +CONFIG_SCSI=y +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=m +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=m +# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_CONSTANTS=y +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transports +# +CONFIG_SCSI_SPI_ATTRS=y +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_AHA152X is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_IN2000 is not set +# CONFIG_SCSI_DTC3280 is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GENERIC_NCR5380 is not set +# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set +# CONFIG_SCSI_NCR53C406A is not set +# CONFIG_SCSI_PAS16 is not set +# CONFIG_SCSI_PSI240I is not set +# CONFIG_SCSI_QLOGIC_FAS is not set +# CONFIG_SCSI_SYM53C416 is not set +# CONFIG_SCSI_T128 is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# + +# +# Old CD-ROM drivers (not SCSI, not IDE) +# +# CONFIG_CD_NO_IDESCSI is not set # # Multi-device support (RAID and LVM) # -# CONFIG_MD is not set +CONFIG_MD=y +CONFIG_BLK_DEV_MD=y +# CONFIG_MD_LINEAR is not set +# CONFIG_MD_RAID0 is not set +CONFIG_MD_RAID1=y +# CONFIG_MD_RAID10 is not set +# CONFIG_MD_RAID456 is not set +# CONFIG_MD_MULTIPATH is not set +# CONFIG_MD_FAULTY is not set +CONFIG_BLK_DEV_DM=m +# CONFIG_DM_DEBUG is not set +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +# CONFIG_DM_MIRROR is not set +# CONFIG_DM_ZERO is not set +# CONFIG_DM_MULTIPATH is not set # # Fusion MPT device support @@ -270,10 +488,16 @@ CONFIG_IOSCHED_NOOP=y # Network device support # CONFIG_NETDEVICES=y -CONFIG_DUMMY=y +CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_NET_SB1000 is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set # # PHY device support @@ -285,8 +509,33 @@ CONFIG_DUMMY=y # CONFIG_NET_ETHERNET=y CONFIG_MII=y -CONFIG_SMC91X=y -# CONFIG_NE2000 is not set +CONFIG_NET_VENDOR_3COM=y +# CONFIG_EL1 is not set +# CONFIG_EL2 is not set +# CONFIG_EL16 is not set +# CONFIG_EL3 is not set +# CONFIG_NET_VENDOR_SMC is not set +# CONFIG_SMC91X is not set +# CONFIG_NET_VENDOR_RACAL is not set +# CONFIG_AT1700 is not set +# CONFIG_DEPCA is not set +# CONFIG_HP100 is not set +CONFIG_NET_ISA=y +# CONFIG_E2100 is not set +# CONFIG_EWRK3 is not set +# CONFIG_EEXPRESS is not set +# CONFIG_EEXPRESS_PRO is not set +# CONFIG_HPLAN_PLUS is not set +# CONFIG_HPLAN is not set +# CONFIG_LP486E is not set +# CONFIG_ETH16I is not set +CONFIG_NE2000=m +# CONFIG_SEEQ8005 is not set +CONFIG_NET_PCI=y +# CONFIG_AC3200 is not set +# CONFIG_APRICOT is not set +# CONFIG_CS89x0 is not set +# CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) @@ -299,21 +548,18 @@ CONFIG_SMC91X=y # # Token Ring devices # +# CONFIG_TR is not set # # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set -# -# PCMCIA network device support -# -# CONFIG_NET_PCMCIA is not set - # # Wan interfaces # # CONFIG_WAN is not set +# CONFIG_PLIP is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_SHAPER is not set @@ -334,35 +580,83 @@ CONFIG_SMC91X=y # # Input device support # -# CONFIG_INPUT is not set +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_INPORT is not set +# CONFIG_MOUSE_LOGIBM is not set +# CONFIG_MOUSE_PC110PAD is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set # # Hardware I/O ports # -# CONFIG_SERIO is not set +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_PARKBD is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set # # Character devices # -# CONFIG_VT is not set +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set # # Serial drivers # -# CONFIG_SERIAL_8250 is not set +CONFIG_SERIAL_8250=m +CONFIG_SERIAL_8250_PNP=m +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set # # Non-8250 serial port support # CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_M32R_SIO=y -CONFIG_SERIAL_M32R_SIO_CONSOLE=y +# CONFIG_SERIAL_M32R_SIO_CONSOLE is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_PRINTER is not set +# CONFIG_PPDEV is not set +# CONFIG_TIPAR is not set # # IPMI @@ -372,13 +666,8 @@ CONFIG_LEGACY_PTY_COUNT=256 # # Watchdog Cards # -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -CONFIG_SOFT_WATCHDOG=y +# CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set # CONFIG_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set @@ -386,21 +675,57 @@ CONFIG_SOFT_WATCHDOG=y # # Ftape, the floppy tape device driver # - -# -# PCMCIA character devices -# -# CONFIG_SYNCLINK_CS is not set # CONFIG_RAW_DRIVER is not set # # TPM devices # +# CONFIG_TCG_TPM is not set # # I2C support # -# CONFIG_I2C is not set +CONFIG_I2C=m +CONFIG_I2C_CHARDEV=m + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=m +CONFIG_I2C_ALGOPCF=m +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +CONFIG_I2C_ELEKTOR=m +CONFIG_I2C_ISA=m +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set # # Dallas's 1-wire bus @@ -410,21 +735,89 @@ CONFIG_SOFT_WATCHDOG=y # # Hardware Monitoring support # -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set +CONFIG_HWMON=y +CONFIG_HWMON_VID=m +# CONFIG_SENSORS_ABITUGURU is not set +CONFIG_SENSORS_ADM1021=m +CONFIG_SENSORS_ADM1025=m +# CONFIG_SENSORS_ADM1026 is not set +CONFIG_SENSORS_ADM1031=m +# CONFIG_SENSORS_ADM9240 is not set +CONFIG_SENSORS_ASB100=m +# CONFIG_SENSORS_ATXP1 is not set +CONFIG_SENSORS_DS1621=m +# CONFIG_SENSORS_F71805F is not set +CONFIG_SENSORS_FSCHER=m +# CONFIG_SENSORS_FSCPOS is not set +CONFIG_SENSORS_GL518SM=m +# CONFIG_SENSORS_GL520SM is not set +CONFIG_SENSORS_IT87=m +# CONFIG_SENSORS_LM63 is not set +CONFIG_SENSORS_LM75=m +CONFIG_SENSORS_LM77=m +CONFIG_SENSORS_LM78=m +CONFIG_SENSORS_LM80=m +CONFIG_SENSORS_LM83=m +CONFIG_SENSORS_LM85=m +# CONFIG_SENSORS_LM87 is not set +CONFIG_SENSORS_LM90=m +# CONFIG_SENSORS_LM92 is not set +CONFIG_SENSORS_MAX1619=m +# CONFIG_SENSORS_PC87360 is not set +CONFIG_SENSORS_SMSC47M1=m +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VT1211 is not set +CONFIG_SENSORS_W83781D=m +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +CONFIG_SENSORS_W83L785TS=m +CONFIG_SENSORS_W83627HF=m +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set # -# Misc devices +# Multimedia devices # +CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +CONFIG_VIDEO_V4L2=y # -# Multimedia Capabilities Port drivers +# Video Capture Adapters # # -# Multimedia devices +# Video Capture Adapters # -# CONFIG_VIDEO_DEV is not set +# CONFIG_VIDEO_ADV_DEBUG is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_PMS is not set +CONFIG_VIDEO_BWQCAM=m +CONFIG_VIDEO_CQCAM=m +# CONFIG_VIDEO_W9966 is not set +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_TUNER_3036 is not set +# CONFIG_VIDEO_M32R_AR is not set + +# +# Radio Adapters +# +# CONFIG_RADIO_CADET is not set +# CONFIG_RADIO_RTRACK is not set +# CONFIG_RADIO_RTRACK2 is not set +# CONFIG_RADIO_AZTECH is not set +# CONFIG_RADIO_GEMTEK is not set +# CONFIG_RADIO_SF16FMI is not set +# CONFIG_RADIO_SF16FMR2 is not set +# CONFIG_RADIO_TERRATEC is not set +# CONFIG_RADIO_TRUST is not set +# CONFIG_RADIO_TYPHOON is not set +# CONFIG_RADIO_ZOLTRIX is not set # # Digital Video Broadcasting Devices @@ -434,8 +827,18 @@ CONFIG_SOFT_WATCHDOG=y # # Graphics support # +CONFIG_FIRMWARE_EDID=y # CONFIG_FB is not set +# +# Console display driver support +# +CONFIG_VGA_CONSOLE=y +# CONFIG_VGACON_SOFT_SCROLLBACK is not set +# CONFIG_MDA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + # # Sound # @@ -446,6 +849,11 @@ CONFIG_SOFT_WATCHDOG=y # # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# # # USB Gadget Support @@ -457,34 +865,70 @@ CONFIG_SOFT_WATCHDOG=y # # CONFIG_MMC is not set +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + # # InfiniBand support # # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices # # # File systems # CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y -# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_EXT3_FS_SECURITY=y +# CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set +CONFIG_JBD_DEBUG=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_INOTIFY is not set +CONFIG_ROMFS_FS=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set @@ -494,8 +938,11 @@ CONFIG_DNOTIFY=y # # CD-ROM/DVD Filesystems # -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +# CONFIG_ZISOFS is not set +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems @@ -503,7 +950,7 @@ CONFIG_DNOTIFY=y CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=932 +CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set @@ -511,11 +958,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # Pseudo filesystems # CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set +CONFIG_CONFIGFS_FS=m # # Miscellaneous filesystems @@ -527,7 +976,7 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -CONFIG_CRAMFS=y +# CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set @@ -542,10 +991,14 @@ CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y +CONFIG_NFSD=m +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +# CONFIG_NFSD_V4 is not set +# CONFIG_NFSD_TCP is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set @@ -567,7 +1020,7 @@ CONFIG_MSDOS_PARTITION=y # Native Language Support # CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_DEFAULT="cp437" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set @@ -592,7 +1045,7 @@ CONFIG_NLS_CODEPAGE_932=y # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set # CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set +CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set @@ -605,32 +1058,28 @@ CONFIG_NLS_CODEPAGE_932=y # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set -CONFIG_NLS_UTF8=y +# CONFIG_NLS_UTF8 is not set # # Profiling support # -# CONFIG_PROFILING is not set +CONFIG_PROFILING=y +CONFIG_OPROFILE=m # # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y -CONFIG_MAGIC_SYSRQ=y +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_FS is not set # CONFIG_FRAME_POINTER is not set -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_UNWIND_INFO is not set +# CONFIG_HEADERS_CHECK is not set # # Security options @@ -641,7 +1090,38 @@ CONFIG_DEBUG_INFO=y # # Cryptographic options # -# CONFIG_CRYPTO is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +# CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +CONFIG_CRYPTO_CRC32C=m +# CONFIG_CRYPTO_TEST is not set # # Hardware crypto devices @@ -650,8 +1130,12 @@ CONFIG_DEBUG_INFO=y # # Library routines # -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set +CONFIG_CRC_CCITT=m +CONFIG_CRC16=m CONFIG_CRC32=y -CONFIG_LIBCRC32C=y -CONFIG_ZLIB_INFLATE=y +CONFIG_LIBCRC32C=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m +CONFIG_PLIST=y diff --git a/arch/m32r/m32700ut/defconfig.m32700ut.smp b/arch/m32r/m32700ut/defconfig.m32700ut.smp index 3e607d90b5f4..13579917afef 100644 --- a/arch/m32r/m32700ut/defconfig.m32700ut.smp +++ b/arch/m32r/m32700ut/defconfig.m32700ut.smp @@ -1,19 +1,18 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc5 -# Fri Jun 3 16:20:58 2005 +# Linux kernel version: 2.6.19 +# Tue Dec 12 17:52:38 2006 # CONFIG_M32R=y -# CONFIG_UID16 is not set CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -21,33 +20,40 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set # CONFIG_POSIX_MQUEUE is not set CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y -# CONFIG_IKCONFIG_PROC is not set +CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -55,12 +61,30 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y CONFIG_STOP_MACHINE=y +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_BLK_DEV_IO_TRACE is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" + # # Processor type and features # @@ -71,8 +95,10 @@ CONFIG_PLAT_M32700UT=y # CONFIG_PLAT_OAKS32R is not set # CONFIG_PLAT_MAPPI2 is not set # CONFIG_PLAT_MAPPI3 is not set +# CONFIG_PLAT_M32104UT is not set CONFIG_CHIP_M32700=y # CONFIG_CHIP_M32102 is not set +# CONFIG_CHIP_M32104 is not set # CONFIG_CHIP_VDEC2 is not set # CONFIG_CHIP_OPSP is not set CONFIG_MMU=y @@ -86,37 +112,39 @@ CONFIG_TIMER_DIVIDE=128 CONFIG_MEMORY_START=0x08000000 CONFIG_MEMORY_SIZE=0x01000000 CONFIG_NOHIGHMEM=y -# CONFIG_DISCONTIGMEM is not set +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +CONFIG_DISCONTIGMEM_MANUAL=y +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_DISCONTIGMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_NEED_MULTIPLE_NODES=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_IRAM_START=0x00f00000 +CONFIG_IRAM_SIZE=0x00080000 CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_PREEMPT=y -# CONFIG_HAVE_DEC_LOCK is not set CONFIG_SMP=y -CONFIG_CHIP_M32700_TS1=y +# CONFIG_CHIP_M32700_TS1 is not set CONFIG_NR_CPUS=2 -# CONFIG_NUMA is not set +CONFIG_NODES_SHIFT=1 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # -# CONFIG_PCI is not set # CONFIG_ISA is not set # # PCCARD (PCMCIA/CardBus) support # -CONFIG_PCCARD=y -# CONFIG_PCMCIA_DEBUG is not set -CONFIG_PCMCIA=y - -# -# PC-card bridges -# -# CONFIG_TCIC is not set -# CONFIG_M32R_PCC is not set -CONFIG_M32R_CFC=y -CONFIG_M32R_CFC_NUM=1 +# CONFIG_PCCARD is not set # # PCI Hotplug Support @@ -128,6 +156,94 @@ CONFIG_M32R_CFC_NUM=1 CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + # # Device Drivers # @@ -137,12 +253,100 @@ CONFIG_BINFMT_ELF=y # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set +CONFIG_FW_LOADER=y +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set # # Memory Technology Devices (MTD) # -# CONFIG_MTD is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_REDBOOT_PARTS=y +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 +# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set +# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +# CONFIG_MTD_CHAR is not set +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=m +CONFIG_MTD_JEDECPROBE=m +CONFIG_MTD_GEN_PROBE=m +CONFIG_MTD_CFI_ADV_OPTIONS=y +# CONFIG_MTD_CFI_NOSWAP is not set +CONFIG_MTD_CFI_BE_BYTE_SWAP=y +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +# CONFIG_MTD_CFI_I2 is not set +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=m +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=m +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set # # Parallel port support @@ -156,7 +360,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # # Block devices # -# CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set @@ -164,23 +367,21 @@ CONFIG_BLK_DEV_NBD=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_BLK_DEV_INITRD is not set -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CDROM_PKTCDVD is not set +CONFIG_ATA_OVER_ETH=m # -# IO Schedulers +# Misc devices # -CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set +# CONFIG_TIFM_CORE is not set # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # @@ -189,7 +390,6 @@ CONFIG_BLK_DEV_IDE=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECS=y CONFIG_BLK_DEV_IDECD=m # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set @@ -208,7 +408,9 @@ CONFIG_IDE_GENERIC=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set CONFIG_SCSI=m +# CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y # @@ -220,6 +422,7 @@ CONFIG_BLK_DEV_SD=m CONFIG_BLK_DEV_SR=m # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs @@ -229,26 +432,23 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_LOGGING is not set # -# SCSI Transport Attributes +# SCSI Transports # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set # # SCSI low-level drivers # -# CONFIG_SCSI_SATA is not set +# CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_DEBUG is not set # -# PCMCIA SCSI adapter support +# Serial ATA (prod) and Parallel ATA (experimental) drivers # -# CONFIG_PCMCIA_AHA152X is not set -# CONFIG_PCMCIA_FDOMAIN is not set -# CONFIG_PCMCIA_NINJA_SCSI is not set -# CONFIG_PCMCIA_QLOGIC is not set -# CONFIG_PCMCIA_SYM53C500 is not set # # Multi-device support (RAID and LVM) @@ -258,6 +458,7 @@ CONFIG_SCSI_MULTI_LUN=y # # Fusion MPT device support # +# CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support @@ -268,75 +469,19 @@ CONFIG_SCSI_MULTI_LUN=y # # -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing +# Network device support # -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# +# PHY device support +# +# CONFIG_PHYLIB is not set + # # Ethernet (10 or 100Mbit) # @@ -362,11 +507,6 @@ CONFIG_SMC91X=y # # CONFIG_NET_RADIO is not set -# -# PCMCIA network device support -# -# CONFIG_NET_PCMCIA is not set - # # Wan interfaces # @@ -375,6 +515,8 @@ CONFIG_SMC91X=y # CONFIG_SLIP is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -390,6 +532,7 @@ CONFIG_SMC91X=y # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces @@ -418,7 +561,6 @@ CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_LIBPS2 is not set # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices @@ -426,6 +568,7 @@ CONFIG_SOUND_GAMEPORT=y CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -454,8 +597,8 @@ CONFIG_LEGACY_PTY_COUNT=256 # Watchdog Cards # # CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y # CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set CONFIG_DS1302=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set @@ -463,52 +606,64 @@ CONFIG_DS1302=y # # Ftape, the floppy tape device driver # -# CONFIG_DRM is not set - -# -# PCMCIA character devices -# -# CONFIG_SYNCLINK_CS is not set # CONFIG_RAW_DRIVER is not set # # TPM devices # +# CONFIG_TCG_TPM is not set # # I2C support # # CONFIG_I2C is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # # CONFIG_W1 is not set # -# Misc devices +# Hardware Monitoring support # +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_HWMON_DEBUG_CHIP is not set # # Multimedia devices # -CONFIG_VIDEO_DEV=y +CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +CONFIG_VIDEO_V4L2=y # -# Video For Linux +# Video Capture Adapters # # -# Video Adapters +# Video Capture Adapters # +# CONFIG_VIDEO_ADV_DEBUG is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +# CONFIG_VIDEO_VIVI is not set # CONFIG_VIDEO_CPIA is not set -CONFIG_VIDEO_M32R_AR=y -CONFIG_VIDEO_M32R_AR_M64278=y +CONFIG_VIDEO_M32R_AR=m +CONFIG_VIDEO_M32R_AR_M64278=m # # Radio Adapters # -# CONFIG_RADIO_MAESTRO is not set # # Digital Video Broadcasting Devices @@ -518,15 +673,16 @@ CONFIG_VIDEO_M32R_AR_M64278=y # # Graphics support # +CONFIG_FIRMWARE_EDID=y CONFIG_FB=y -# CONFIG_FB_CFB_FILLRECT is not set -# CONFIG_FB_CFB_COPYAREA is not set -# CONFIG_FB_CFB_IMAGEBLIT is not set -# CONFIG_FB_SOFT_CURSOR is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set -# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_S1D13XXX=y # CONFIG_FB_VIRTUAL is not set # @@ -535,6 +691,7 @@ CONFIG_FB=y # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y @@ -546,6 +703,7 @@ CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_LOGO_M32R_CLUT224=y # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -558,6 +716,11 @@ CONFIG_LOGO_LINUX_CLUT224=y # # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# # # USB Gadget Support @@ -567,23 +730,62 @@ CONFIG_LOGO_LINUX_CLUT224=y # # MMC/SD Card support # -# CONFIG_MMC is not set +CONFIG_MMC=y +CONFIG_MMC_DEBUG=y +CONFIG_MMC_BLOCK=y +# CONFIG_MMC_TIFM_SD is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# # # InfiniBand support # -# CONFIG_INFINIBAND is not set + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# # # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set -CONFIG_EXT3_FS=m +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=m +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y CONFIG_JBD_DEBUG=y CONFIG_FS_MBCACHE=y CONFIG_REISERFS_FS=m @@ -591,17 +793,19 @@ CONFIG_REISERFS_FS=m # CONFIG_REISERFS_PROC_INFO is not set # CONFIG_REISERFS_FS_XATTR is not set # CONFIG_JFS_FS is not set - -# -# XFS support -# +# CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -627,15 +831,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y -CONFIG_DEVFS_FS=y -CONFIG_DEVFS_MOUNT=y -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -647,6 +849,8 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +# CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set @@ -659,12 +863,14 @@ CONFIG_RAMFS=y # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set @@ -673,6 +879,7 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -727,16 +934,23 @@ CONFIG_NLS_DEFAULT="iso8859-1" # # Profiling support # -# CONFIG_PROFILING is not set +CONFIG_PROFILING=y +CONFIG_OPROFILE=y # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=15 # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_FS is not set # CONFIG_FRAME_POINTER is not set +# CONFIG_UNWIND_INFO is not set +# CONFIG_HEADERS_CHECK is not set # # Security options @@ -749,13 +963,10 @@ CONFIG_LOG_BUF_SHIFT=15 # # CONFIG_CRYPTO is not set -# -# Hardware crypto devices -# - # # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set diff --git a/arch/m32r/m32700ut/defconfig.m32700ut.up b/arch/m32r/m32700ut/defconfig.m32700ut.up index 2d3e7cda8f46..190f961d33e2 100644 --- a/arch/m32r/m32700ut/defconfig.m32700ut.up +++ b/arch/m32r/m32700ut/defconfig.m32700ut.up @@ -1,19 +1,18 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc5 -# Fri Jun 3 16:21:34 2005 +# Linux kernel version: 2.6.19 +# Tue Dec 12 12:07:08 2006 # CONFIG_M32R=y -# CONFIG_UID16 is not set CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -22,32 +21,39 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set # CONFIG_POSIX_MQUEUE is not set CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y -# CONFIG_IKCONFIG_PROC is not set +CONFIG_IKCONFIG_PROC=y +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -55,11 +61,29 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_BLK_DEV_IO_TRACE is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" + # # Processor type and features # @@ -70,8 +94,10 @@ CONFIG_PLAT_M32700UT=y # CONFIG_PLAT_OAKS32R is not set # CONFIG_PLAT_MAPPI2 is not set # CONFIG_PLAT_MAPPI3 is not set +# CONFIG_PLAT_M32104UT is not set CONFIG_CHIP_M32700=y # CONFIG_CHIP_M32102 is not set +# CONFIG_CHIP_M32104 is not set # CONFIG_CHIP_VDEC2 is not set # CONFIG_CHIP_OPSP is not set CONFIG_MMU=y @@ -85,34 +111,37 @@ CONFIG_TIMER_DIVIDE=128 CONFIG_MEMORY_START=0x08000000 CONFIG_MEMORY_SIZE=0x01000000 CONFIG_NOHIGHMEM=y -# CONFIG_DISCONTIGMEM is not set +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +CONFIG_DISCONTIGMEM_MANUAL=y +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_DISCONTIGMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_NEED_MULTIPLE_NODES=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_IRAM_START=0x00f00000 +CONFIG_IRAM_SIZE=0x00080000 CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_PREEMPT=y -# CONFIG_HAVE_DEC_LOCK is not set # CONFIG_SMP is not set +CONFIG_NODES_SHIFT=1 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # -# CONFIG_PCI is not set # CONFIG_ISA is not set # # PCCARD (PCMCIA/CardBus) support # -CONFIG_PCCARD=y -# CONFIG_PCMCIA_DEBUG is not set -CONFIG_PCMCIA=y - -# -# PC-card bridges -# -# CONFIG_TCIC is not set -# CONFIG_M32R_PCC is not set -CONFIG_M32R_CFC=y -CONFIG_M32R_CFC_NUM=1 +# CONFIG_PCCARD is not set # # PCI Hotplug Support @@ -124,6 +153,94 @@ CONFIG_M32R_CFC_NUM=1 CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + # # Device Drivers # @@ -133,12 +250,100 @@ CONFIG_BINFMT_ELF=y # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set +CONFIG_FW_LOADER=y +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set # # Memory Technology Devices (MTD) # -# CONFIG_MTD is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_REDBOOT_PARTS=y +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 +# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set +# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +# CONFIG_MTD_CHAR is not set +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=m +CONFIG_MTD_JEDECPROBE=m +CONFIG_MTD_GEN_PROBE=m +CONFIG_MTD_CFI_ADV_OPTIONS=y +# CONFIG_MTD_CFI_NOSWAP is not set +CONFIG_MTD_CFI_BE_BYTE_SWAP=y +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +# CONFIG_MTD_CFI_I2 is not set +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=m +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=m +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set # # Parallel port support @@ -152,7 +357,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # # Block devices # -# CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set @@ -160,23 +364,21 @@ CONFIG_BLK_DEV_NBD=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_BLK_DEV_INITRD is not set -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CDROM_PKTCDVD is not set +CONFIG_ATA_OVER_ETH=m # -# IO Schedulers +# Misc devices # -CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set +# CONFIG_TIFM_CORE is not set # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # @@ -185,7 +387,6 @@ CONFIG_BLK_DEV_IDE=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECS=y CONFIG_BLK_DEV_IDECD=m # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set @@ -204,7 +405,9 @@ CONFIG_IDE_GENERIC=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set CONFIG_SCSI=m +# CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y # @@ -216,6 +419,7 @@ CONFIG_BLK_DEV_SD=m CONFIG_BLK_DEV_SR=m # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs @@ -225,26 +429,23 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_LOGGING is not set # -# SCSI Transport Attributes +# SCSI Transports # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set # # SCSI low-level drivers # -# CONFIG_SCSI_SATA is not set +# CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_DEBUG is not set # -# PCMCIA SCSI adapter support +# Serial ATA (prod) and Parallel ATA (experimental) drivers # -# CONFIG_PCMCIA_AHA152X is not set -# CONFIG_PCMCIA_FDOMAIN is not set -# CONFIG_PCMCIA_NINJA_SCSI is not set -# CONFIG_PCMCIA_QLOGIC is not set -# CONFIG_PCMCIA_SYM53C500 is not set # # Multi-device support (RAID and LVM) @@ -254,6 +455,7 @@ CONFIG_SCSI_MULTI_LUN=y # # Fusion MPT device support # +# CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support @@ -264,75 +466,19 @@ CONFIG_SCSI_MULTI_LUN=y # # -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing +# Network device support # -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# +# PHY device support +# +# CONFIG_PHYLIB is not set + # # Ethernet (10 or 100Mbit) # @@ -358,11 +504,6 @@ CONFIG_SMC91X=y # # CONFIG_NET_RADIO is not set -# -# PCMCIA network device support -# -# CONFIG_NET_PCMCIA is not set - # # Wan interfaces # @@ -371,6 +512,8 @@ CONFIG_SMC91X=y # CONFIG_SLIP is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -386,6 +529,7 @@ CONFIG_SMC91X=y # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces @@ -414,7 +558,6 @@ CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_LIBPS2 is not set # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices @@ -422,6 +565,7 @@ CONFIG_SOUND_GAMEPORT=y CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -450,8 +594,8 @@ CONFIG_LEGACY_PTY_COUNT=256 # Watchdog Cards # # CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y # CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set CONFIG_DS1302=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set @@ -459,52 +603,64 @@ CONFIG_DS1302=y # # Ftape, the floppy tape device driver # -# CONFIG_DRM is not set - -# -# PCMCIA character devices -# -# CONFIG_SYNCLINK_CS is not set # CONFIG_RAW_DRIVER is not set # # TPM devices # +# CONFIG_TCG_TPM is not set # # I2C support # # CONFIG_I2C is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # # CONFIG_W1 is not set # -# Misc devices +# Hardware Monitoring support # +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_HWMON_DEBUG_CHIP is not set # # Multimedia devices # -CONFIG_VIDEO_DEV=y +CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +CONFIG_VIDEO_V4L2=y # -# Video For Linux +# Video Capture Adapters # # -# Video Adapters +# Video Capture Adapters # +# CONFIG_VIDEO_ADV_DEBUG is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +# CONFIG_VIDEO_VIVI is not set # CONFIG_VIDEO_CPIA is not set -CONFIG_VIDEO_M32R_AR=y -CONFIG_VIDEO_M32R_AR_M64278=y +CONFIG_VIDEO_M32R_AR=m +CONFIG_VIDEO_M32R_AR_M64278=m # # Radio Adapters # -# CONFIG_RADIO_MAESTRO is not set # # Digital Video Broadcasting Devices @@ -514,15 +670,16 @@ CONFIG_VIDEO_M32R_AR_M64278=y # # Graphics support # +CONFIG_FIRMWARE_EDID=y CONFIG_FB=y -# CONFIG_FB_CFB_FILLRECT is not set -# CONFIG_FB_CFB_COPYAREA is not set -# CONFIG_FB_CFB_IMAGEBLIT is not set -# CONFIG_FB_SOFT_CURSOR is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set -# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_S1D13XXX=y # CONFIG_FB_VIRTUAL is not set # @@ -531,6 +688,7 @@ CONFIG_FB=y # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y @@ -542,6 +700,7 @@ CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_LOGO_M32R_CLUT224=y # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -554,6 +713,11 @@ CONFIG_LOGO_LINUX_CLUT224=y # # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# # # USB Gadget Support @@ -563,23 +727,62 @@ CONFIG_LOGO_LINUX_CLUT224=y # # MMC/SD Card support # -# CONFIG_MMC is not set +CONFIG_MMC=y +CONFIG_MMC_DEBUG=y +CONFIG_MMC_BLOCK=y +# CONFIG_MMC_TIFM_SD is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# # # InfiniBand support # -# CONFIG_INFINIBAND is not set + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# # # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set -CONFIG_EXT3_FS=m +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=m +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y CONFIG_JBD_DEBUG=y CONFIG_FS_MBCACHE=y CONFIG_REISERFS_FS=m @@ -587,17 +790,19 @@ CONFIG_REISERFS_FS=m # CONFIG_REISERFS_PROC_INFO is not set # CONFIG_REISERFS_FS_XATTR is not set # CONFIG_JFS_FS is not set - -# -# XFS support -# +# CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -623,15 +828,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y -CONFIG_DEVFS_FS=y -CONFIG_DEVFS_MOUNT=y -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -643,6 +846,8 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +# CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set @@ -655,12 +860,14 @@ CONFIG_RAMFS=y # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set @@ -669,6 +876,7 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -723,16 +931,23 @@ CONFIG_NLS_DEFAULT="iso8859-1" # # Profiling support # -# CONFIG_PROFILING is not set +CONFIG_PROFILING=y +CONFIG_OPROFILE=y # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_FS is not set # CONFIG_FRAME_POINTER is not set +# CONFIG_UNWIND_INFO is not set +# CONFIG_HEADERS_CHECK is not set # # Security options @@ -745,13 +960,10 @@ CONFIG_LOG_BUF_SHIFT=14 # # CONFIG_CRYPTO is not set -# -# Hardware crypto devices -# - # # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set diff --git a/arch/m32r/mappi/defconfig.nommu b/arch/m32r/mappi/defconfig.nommu index a8425fba340b..fbf6c384c9d0 100644 --- a/arch/m32r/mappi/defconfig.nommu +++ b/arch/m32r/mappi/defconfig.nommu @@ -1,19 +1,18 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc5 -# Fri Jun 3 16:21:46 2005 +# Linux kernel version: 2.6.19 +# Wed Dec 13 17:57:45 2006 # CONFIG_M32R=y -# CONFIG_UID16 is not set CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -22,29 +21,36 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SYSVIPC is not set # CONFIG_POSIX_MQUEUE is not set CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y # CONFIG_IKCONFIG_PROC is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -52,11 +58,29 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_BLK_DEV_IO_TRACE is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" + # # Processor type and features # @@ -67,8 +91,10 @@ CONFIG_PLAT_MAPPI=y # CONFIG_PLAT_OAKS32R is not set # CONFIG_PLAT_MAPPI2 is not set # CONFIG_PLAT_MAPPI3 is not set +# CONFIG_PLAT_M32104UT is not set CONFIG_CHIP_M32700=y # CONFIG_CHIP_M32102 is not set +# CONFIG_CHIP_M32104 is not set # CONFIG_CHIP_VDEC2 is not set # CONFIG_CHIP_OPSP is not set # CONFIG_MMU is not set @@ -82,18 +108,31 @@ CONFIG_TIMER_DIVIDE=128 CONFIG_MEMORY_START=0x00000000 CONFIG_MEMORY_SIZE=0x00E00000 CONFIG_NOHIGHMEM=y -# CONFIG_DISCONTIGMEM is not set +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +CONFIG_DISCONTIGMEM_MANUAL=y +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_DISCONTIGMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_NEED_MULTIPLE_NODES=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_IRAM_START=0x00f00000 +CONFIG_IRAM_SIZE=0x00080000 CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_PREEMPT=y -# CONFIG_HAVE_DEC_LOCK is not set # CONFIG_SMP is not set +CONFIG_NODES_SHIFT=1 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # -# CONFIG_PCI is not set # CONFIG_ISA is not set # @@ -102,12 +141,14 @@ CONFIG_PREEMPT=y CONFIG_PCCARD=y # CONFIG_PCMCIA_DEBUG is not set CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y # # PC-card bridges # -# CONFIG_TCIC is not set CONFIG_M32R_PCC=y +CONFIG_PCCARD_NONSTATIC=y # # PCI Hotplug Support @@ -121,6 +162,94 @@ CONFIG_BINFMT_FLAT=y # CONFIG_BINFMT_SHARED_FLAT is not set # CONFIG_BINFMT_MISC is not set +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + # # Device Drivers # @@ -130,7 +259,13 @@ CONFIG_BINFMT_FLAT=y # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set +CONFIG_FW_LOADER=y +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set # # Memory Technology Devices (MTD) @@ -149,7 +284,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # # Block devices # -# CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set @@ -157,18 +291,15 @@ CONFIG_BLK_DEV_NBD=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_BLK_DEV_INITRD is not set -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set # -# IO Schedulers +# Misc devices # -CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set +# CONFIG_TIFM_CORE is not set # # ATA/ATAPI/MFM/RLL support @@ -178,7 +309,13 @@ CONFIG_IOSCHED_CFQ=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# # # Multi-device support (RAID and LVM) @@ -188,6 +325,7 @@ CONFIG_IOSCHED_CFQ=y # # Fusion MPT device support # +# CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support @@ -198,75 +336,18 @@ CONFIG_IOSCHED_CFQ=y # # -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing +# Network device support # -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# +# PHY device support +# + # # Ethernet (10 or 100Mbit) # @@ -303,6 +384,8 @@ CONFIG_NE2000=y # CONFIG_SLIP is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -318,6 +401,7 @@ CONFIG_NE2000=y # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces @@ -346,7 +430,6 @@ CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_LIBPS2 is not set # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices @@ -366,7 +449,6 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_M32R_SIO=y CONFIG_SERIAL_M32R_SIO_CONSOLE=y -# CONFIG_SERIAL_M32R_PLDSIO is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -380,39 +462,53 @@ CONFIG_LEGACY_PTY_COUNT=256 # Watchdog Cards # # CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y # CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # # Ftape, the floppy tape device driver # -# CONFIG_DRM is not set # # PCMCIA character devices # # CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set # CONFIG_RAW_DRIVER is not set # # TPM devices # +# CONFIG_TCG_TPM is not set # # I2C support # # CONFIG_I2C is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # # CONFIG_W1 is not set # -# Misc devices +# Hardware Monitoring support # +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_HWMON_DEBUG_CHIP is not set # # Multimedia devices @@ -427,7 +523,9 @@ CONFIG_LEGACY_PTY_COUNT=256 # # Graphics support # +CONFIG_FIRMWARE_EDID=y # CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -439,6 +537,11 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# # # USB Gadget Support @@ -450,31 +553,73 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_MMC is not set +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + # # InfiniBand support # -# CONFIG_INFINIBAND is not set + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# # # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set - -# -# XFS support -# +# CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -493,15 +638,12 @@ CONFIG_DNOTIFY=y # Pseudo filesystems # CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y -CONFIG_DEVFS_FS=y -CONFIG_DEVFS_MOUNT=y -# CONFIG_DEVFS_DEBUG is not set -CONFIG_DEVPTS_FS_XATTR=y -CONFIG_DEVPTS_FS_SECURITY=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -525,12 +667,14 @@ CONFIG_RAMFS=y # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set @@ -539,6 +683,7 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -599,10 +744,16 @@ CONFIG_NLS_DEFAULT="iso8859-1" # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_FS is not set # CONFIG_FRAME_POINTER is not set +# CONFIG_UNWIND_INFO is not set +# CONFIG_HEADERS_CHECK is not set # # Security options @@ -615,13 +766,10 @@ CONFIG_LOG_BUF_SHIFT=14 # # CONFIG_CRYPTO is not set -# -# Hardware crypto devices -# - # # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set diff --git a/arch/m32r/mappi/defconfig.smp b/arch/m32r/mappi/defconfig.smp index 1a7f3cd42246..168669202b94 100644 --- a/arch/m32r/mappi/defconfig.smp +++ b/arch/m32r/mappi/defconfig.smp @@ -1,21 +1,18 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc5 -# Fri Jun 3 16:21:52 2005 +# Linux kernel version: 2.6.19 +# Wed Dec 13 17:50:59 2006 # CONFIG_M32R=y -# CONFIG_UID16 is not set CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options # CONFIG_EXPERIMENTAL=y -# CONFIG_CLEAN_COMPILE is not set -CONFIG_BROKEN=y -CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -23,32 +20,39 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -56,12 +60,30 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y CONFIG_STOP_MACHINE=y +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_BLK_DEV_IO_TRACE is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" + # # Processor type and features # @@ -72,8 +94,10 @@ CONFIG_PLAT_MAPPI=y # CONFIG_PLAT_OAKS32R is not set # CONFIG_PLAT_MAPPI2 is not set # CONFIG_PLAT_MAPPI3 is not set +# CONFIG_PLAT_M32104UT is not set CONFIG_CHIP_M32700=y # CONFIG_CHIP_M32102 is not set +# CONFIG_CHIP_M32104 is not set # CONFIG_CHIP_VDEC2 is not set # CONFIG_CHIP_OPSP is not set CONFIG_MMU=y @@ -87,23 +111,33 @@ CONFIG_TIMER_DIVIDE=128 CONFIG_MEMORY_START=0x08000000 CONFIG_MEMORY_SIZE=0x04000000 CONFIG_NOHIGHMEM=y +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +CONFIG_DISCONTIGMEM_MANUAL=y +# CONFIG_SPARSEMEM_MANUAL is not set CONFIG_DISCONTIGMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_NEED_MULTIPLE_NODES=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set CONFIG_IRAM_START=0x00f00000 CONFIG_IRAM_SIZE=0x00080000 CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_PREEMPT=y -# CONFIG_HAVE_DEC_LOCK is not set CONFIG_SMP=y CONFIG_CHIP_M32700_TS1=y CONFIG_NR_CPUS=2 -# CONFIG_NUMA is not set +CONFIG_NODES_SHIFT=1 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # -# CONFIG_PCI is not set # CONFIG_ISA is not set # @@ -112,12 +146,14 @@ CONFIG_NR_CPUS=2 CONFIG_PCCARD=y # CONFIG_PCMCIA_DEBUG is not set CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y # # PC-card bridges # -# CONFIG_TCIC is not set CONFIG_M32R_PCC=y +CONFIG_PCCARD_NONSTATIC=y # # PCI Hotplug Support @@ -129,6 +165,93 @@ CONFIG_M32R_PCC=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +# CONFIG_PACKET is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + # # Device Drivers # @@ -138,7 +261,13 @@ CONFIG_BINFMT_ELF=y # # CONFIG_STANDALONE is not set CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set +CONFIG_FW_LOADER=y +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set # # Memory Technology Devices (MTD) @@ -161,6 +290,8 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set # # RAM/ROM/Flash chip drivers @@ -186,6 +317,7 @@ CONFIG_MTD_CFI_I2=y # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers @@ -193,7 +325,6 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set # CONFIG_MTD_BLOCK2MTD is not set # @@ -208,6 +339,11 @@ CONFIG_MTD_CFI_I2=y # # CONFIG_MTD_NAND is not set +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + # # Parallel port support # @@ -220,7 +356,6 @@ CONFIG_MTD_CFI_I2=y # # Block devices # -# CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set @@ -228,23 +363,21 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set # -# IO Schedulers +# Misc devices # -CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set +# CONFIG_TIFM_CORE is not set # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=m +CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=m # @@ -271,7 +404,13 @@ CONFIG_IDE_GENERIC=m # # SCSI device support # +# CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# # # Multi-device support (RAID and LVM) @@ -281,85 +420,29 @@ CONFIG_IDE_GENERIC=m # # Fusion MPT device support # +# CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # -# CONFIG_IEEE1394 is not set # # I2O device support # # -# Networking support +# Network device support # -CONFIG_NET=y - -# -# Networking options -# -# CONFIG_PACKET is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# +# PHY device support +# + # # Ethernet (10 or 100Mbit) # @@ -396,6 +479,8 @@ CONFIG_NE2000=y # CONFIG_SLIP is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -411,6 +496,7 @@ CONFIG_NE2000=y # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces @@ -442,7 +528,6 @@ CONFIG_SERIO=y # CONFIG_SERIO_LIBPS2 is not set # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices @@ -462,7 +547,6 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_M32R_SIO=y CONFIG_SERIAL_M32R_SIO_CONSOLE=y -# CONFIG_SERIAL_M32R_PLDSIO is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -476,39 +560,53 @@ CONFIG_LEGACY_PTY_COUNT=256 # Watchdog Cards # # CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y # CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # # Ftape, the floppy tape device driver # -# CONFIG_DRM is not set # # PCMCIA character devices # # CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set # CONFIG_RAW_DRIVER is not set # # TPM devices # +# CONFIG_TCG_TPM is not set # # I2C support # # CONFIG_I2C is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # # CONFIG_W1 is not set # -# Misc devices +# Hardware Monitoring support # +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_HWMON_DEBUG_CHIP is not set # # Multimedia devices @@ -523,7 +621,9 @@ CONFIG_LEGACY_PTY_COUNT=256 # # Graphics support # +CONFIG_FIRMWARE_EDID=y # CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -535,6 +635,11 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# # # USB Gadget Support @@ -546,31 +651,74 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_MMC is not set +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + # # InfiniBand support # -# CONFIG_INFINIBAND is not set + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# # # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set - -# -# XFS support -# +# CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set CONFIG_ROMFS_FS=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -595,16 +743,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y -CONFIG_DEVFS_FS=y -CONFIG_DEVFS_MOUNT=y -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set -# CONFIG_HUGETLBFS is not set +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -621,8 +766,9 @@ CONFIG_JFFS_FS_VERBOSE=0 CONFIG_JFFS_PROC_FS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 -# CONFIG_JFFS2_FS_NAND is not set -# CONFIG_JFFS2_FS_NOR_ECC is not set +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y @@ -639,12 +785,14 @@ CONFIG_JFFS2_RTIME=y # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set @@ -653,6 +801,7 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -713,10 +862,16 @@ CONFIG_NLS_DEFAULT="iso8859-1" # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=15 # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_FS is not set # CONFIG_FRAME_POINTER is not set +# CONFIG_UNWIND_INFO is not set +# CONFIG_HEADERS_CHECK is not set # # Security options @@ -729,14 +884,11 @@ CONFIG_LOG_BUF_SHIFT=15 # # CONFIG_CRYPTO is not set -# -# Hardware crypto devices -# - # # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y diff --git a/arch/m32r/mappi/defconfig.up b/arch/m32r/mappi/defconfig.up index 38910fb76692..5ba00603c1a0 100644 --- a/arch/m32r/mappi/defconfig.up +++ b/arch/m32r/mappi/defconfig.up @@ -1,20 +1,18 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc5 -# Fri Jun 3 16:21:59 2005 +# Linux kernel version: 2.6.19 +# Wed Dec 13 17:51:20 2006 # CONFIG_M32R=y -# CONFIG_UID16 is not set CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options # CONFIG_EXPERIMENTAL=y -# CONFIG_CLEAN_COMPILE is not set -CONFIG_BROKEN=y CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -23,31 +21,38 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -55,11 +60,29 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_BLK_DEV_IO_TRACE is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" + # # Processor type and features # @@ -70,8 +93,10 @@ CONFIG_PLAT_MAPPI=y # CONFIG_PLAT_OAKS32R is not set # CONFIG_PLAT_MAPPI2 is not set # CONFIG_PLAT_MAPPI3 is not set +# CONFIG_PLAT_M32104UT is not set CONFIG_CHIP_M32700=y # CONFIG_CHIP_M32102 is not set +# CONFIG_CHIP_M32104 is not set # CONFIG_CHIP_VDEC2 is not set # CONFIG_CHIP_OPSP is not set CONFIG_MMU=y @@ -85,20 +110,31 @@ CONFIG_TIMER_DIVIDE=128 CONFIG_MEMORY_START=0x08000000 CONFIG_MEMORY_SIZE=0x04000000 CONFIG_NOHIGHMEM=y +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +CONFIG_DISCONTIGMEM_MANUAL=y +# CONFIG_SPARSEMEM_MANUAL is not set CONFIG_DISCONTIGMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_NEED_MULTIPLE_NODES=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set CONFIG_IRAM_START=0x00f00000 CONFIG_IRAM_SIZE=0x00080000 CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_PREEMPT=y -# CONFIG_HAVE_DEC_LOCK is not set # CONFIG_SMP is not set +CONFIG_NODES_SHIFT=1 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # -# CONFIG_PCI is not set # CONFIG_ISA is not set # @@ -107,12 +143,14 @@ CONFIG_PREEMPT=y CONFIG_PCCARD=y # CONFIG_PCMCIA_DEBUG is not set CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y # # PC-card bridges # -# CONFIG_TCIC is not set CONFIG_M32R_PCC=y +CONFIG_PCCARD_NONSTATIC=y # # PCI Hotplug Support @@ -124,6 +162,93 @@ CONFIG_M32R_PCC=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +# CONFIG_PACKET is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + # # Device Drivers # @@ -133,7 +258,13 @@ CONFIG_BINFMT_ELF=y # # CONFIG_STANDALONE is not set CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set +CONFIG_FW_LOADER=y +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set # # Memory Technology Devices (MTD) @@ -156,6 +287,8 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set # # RAM/ROM/Flash chip drivers @@ -181,6 +314,7 @@ CONFIG_MTD_CFI_I2=y # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers @@ -188,7 +322,6 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set # CONFIG_MTD_BLOCK2MTD is not set # @@ -203,6 +336,11 @@ CONFIG_MTD_CFI_I2=y # # CONFIG_MTD_NAND is not set +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + # # Parallel port support # @@ -215,7 +353,6 @@ CONFIG_MTD_CFI_I2=y # # Block devices # -# CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set @@ -223,23 +360,21 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set # -# IO Schedulers +# Misc devices # -CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set +# CONFIG_TIFM_CORE is not set # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=m +CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=m # @@ -266,7 +401,13 @@ CONFIG_IDE_GENERIC=m # # SCSI device support # +# CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# # # Multi-device support (RAID and LVM) @@ -276,85 +417,29 @@ CONFIG_IDE_GENERIC=m # # Fusion MPT device support # +# CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # -# CONFIG_IEEE1394 is not set # # I2O device support # # -# Networking support +# Network device support # -CONFIG_NET=y - -# -# Networking options -# -# CONFIG_PACKET is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# +# PHY device support +# + # # Ethernet (10 or 100Mbit) # @@ -391,6 +476,8 @@ CONFIG_NE2000=y # CONFIG_SLIP is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -406,6 +493,7 @@ CONFIG_NE2000=y # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces @@ -437,7 +525,6 @@ CONFIG_SERIO=y # CONFIG_SERIO_LIBPS2 is not set # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices @@ -457,7 +544,6 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_M32R_SIO=y CONFIG_SERIAL_M32R_SIO_CONSOLE=y -# CONFIG_SERIAL_M32R_PLDSIO is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -471,39 +557,53 @@ CONFIG_LEGACY_PTY_COUNT=256 # Watchdog Cards # # CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y # CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # # Ftape, the floppy tape device driver # -# CONFIG_DRM is not set # # PCMCIA character devices # # CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set # CONFIG_RAW_DRIVER is not set # # TPM devices # +# CONFIG_TCG_TPM is not set # # I2C support # # CONFIG_I2C is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # # CONFIG_W1 is not set # -# Misc devices +# Hardware Monitoring support # +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_HWMON_DEBUG_CHIP is not set # # Multimedia devices @@ -518,7 +618,9 @@ CONFIG_LEGACY_PTY_COUNT=256 # # Graphics support # +CONFIG_FIRMWARE_EDID=y # CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -530,6 +632,11 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# # # USB Gadget Support @@ -541,31 +648,74 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_MMC is not set +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + # # InfiniBand support # -# CONFIG_INFINIBAND is not set + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# # # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set - -# -# XFS support -# +# CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set CONFIG_ROMFS_FS=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -590,16 +740,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y -CONFIG_DEVFS_FS=y -CONFIG_DEVFS_MOUNT=y -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set -# CONFIG_HUGETLBFS is not set +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -616,8 +763,9 @@ CONFIG_JFFS_FS_VERBOSE=0 CONFIG_JFFS_PROC_FS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 -# CONFIG_JFFS2_FS_NAND is not set -# CONFIG_JFFS2_FS_NOR_ECC is not set +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y @@ -634,12 +782,14 @@ CONFIG_JFFS2_RTIME=y # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set @@ -648,6 +798,7 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -708,10 +859,16 @@ CONFIG_NLS_DEFAULT="iso8859-1" # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_FS is not set # CONFIG_FRAME_POINTER is not set +# CONFIG_UNWIND_INFO is not set +# CONFIG_HEADERS_CHECK is not set # # Security options @@ -724,14 +881,11 @@ CONFIG_LOG_BUF_SHIFT=14 # # CONFIG_CRYPTO is not set -# -# Hardware crypto devices -# - # # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y diff --git a/arch/m32r/mappi2/defconfig.opsp b/arch/m32r/mappi2/defconfig.opsp new file mode 100644 index 000000000000..b379ae96e6a7 --- /dev/null +++ b/arch/m32r/mappi2/defconfig.opsp @@ -0,0 +1,883 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.19 +# Wed Dec 13 19:40:30 2006 +# +CONFIG_M32R=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +# CONFIG_IKCONFIG_PROC is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +# CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +# CONFIG_FUTEX is not set +# CONFIG_EPOLL is not set +CONFIG_SHMEM=y +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_BLK_DEV_IO_TRACE is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" + +# +# Processor type and features +# +# CONFIG_PLAT_MAPPI is not set +# CONFIG_PLAT_USRV is not set +# CONFIG_PLAT_M32700UT is not set +# CONFIG_PLAT_OPSPUT is not set +# CONFIG_PLAT_OAKS32R is not set +CONFIG_PLAT_MAPPI2=y +# CONFIG_PLAT_MAPPI3 is not set +# CONFIG_PLAT_M32104UT is not set +# CONFIG_CHIP_M32700 is not set +# CONFIG_CHIP_M32102 is not set +# CONFIG_CHIP_M32104 is not set +# CONFIG_CHIP_VDEC2 is not set +CONFIG_CHIP_OPSP=y +CONFIG_MMU=y +CONFIG_TLB_ENTRIES=16 +CONFIG_ISA_M32R2=y +CONFIG_ISA_DSP_LEVEL2=y +CONFIG_ISA_DUAL_ISSUE=y +CONFIG_BUS_CLOCK=50000000 +CONFIG_TIMER_DIVIDE=128 +# CONFIG_CPU_LITTLE_ENDIAN is not set +CONFIG_MEMORY_START=0x08000000 +CONFIG_MEMORY_SIZE=0x01000000 +CONFIG_NOHIGHMEM=y +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +CONFIG_DISCONTIGMEM_MANUAL=y +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_DISCONTIGMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_NEED_MULTIPLE_NODES=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_IRAM_START=0x00f00000 +CONFIG_IRAM_SIZE=0x00008000 +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_PREEMPT=y +# CONFIG_SMP is not set +CONFIG_NODES_SHIFT=1 + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +# CONFIG_ISA is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y + +# +# PC-card bridges +# +# CONFIG_M32R_CFC is not set + +# +# PCI Hotplug Support +# + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_NBD=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +# CONFIG_TIFM_CORE is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_BLK_DEV_IDECS=y +CONFIG_BLK_DEV_IDECD=m +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +# CONFIG_IDE_ARM is not set +# CONFIG_BLK_DEV_IDEDMA is not set +# CONFIG_IDEDMA_AUTO is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=m +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=m +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=m +# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set + +# +# PCMCIA SCSI adapter support +# +# CONFIG_PCMCIA_AHA152X is not set +# CONFIG_PCMCIA_FDOMAIN is not set +# CONFIG_PCMCIA_NINJA_SCSI is not set +# CONFIG_PCMCIA_QLOGIC is not set +# CONFIG_PCMCIA_SYM53C500 is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_SMC91X=y +# CONFIG_NE2000 is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# PCMCIA network device support +# +# CONFIG_NET_PCMCIA is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_M32R_SIO=y +CONFIG_SERIAL_M32R_SIO_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Multimedia devices +# +CONFIG_VIDEO_DEV=y +CONFIG_VIDEO_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +CONFIG_VIDEO_V4L2=y + +# +# Video Capture Adapters +# + +# +# Video Capture Adapters +# +# CONFIG_VIDEO_ADV_DEBUG is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_M32R_AR is not set + +# +# Radio Adapters +# + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +CONFIG_JBD_DEBUG=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +# CONFIG_ZISOFS is not set +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_FRAME_POINTER is not set +# CONFIG_UNWIND_INFO is not set +# CONFIG_HEADERS_CHECK is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set diff --git a/arch/m32r/mappi2/defconfig.vdec2 b/arch/m32r/mappi2/defconfig.vdec2 index 56f287b65898..fe5b2a63cd68 100644 --- a/arch/m32r/mappi2/defconfig.vdec2 +++ b/arch/m32r/mappi2/defconfig.vdec2 @@ -1,19 +1,18 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc5 -# Fri Jun 3 16:22:02 2005 +# Linux kernel version: 2.6.19 +# Wed Dec 13 19:31:44 2006 # CONFIG_M32R=y -# CONFIG_UID16 is not set CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -22,32 +21,39 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set # CONFIG_POSIX_MQUEUE is not set CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y # CONFIG_IKCONFIG_PROC is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -55,11 +61,29 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_BLK_DEV_IO_TRACE is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" + # # Processor type and features # @@ -70,8 +94,10 @@ CONFIG_KMOD=y # CONFIG_PLAT_OAKS32R is not set CONFIG_PLAT_MAPPI2=y # CONFIG_PLAT_MAPPI3 is not set +# CONFIG_PLAT_M32104UT is not set # CONFIG_CHIP_M32700 is not set # CONFIG_CHIP_M32102 is not set +# CONFIG_CHIP_M32104 is not set CONFIG_CHIP_VDEC2=y # CONFIG_CHIP_OPSP is not set CONFIG_MMU=y @@ -83,18 +109,31 @@ CONFIG_TIMER_DIVIDE=128 CONFIG_MEMORY_START=0x08000000 CONFIG_MEMORY_SIZE=0x01000000 CONFIG_NOHIGHMEM=y -# CONFIG_DISCONTIGMEM is not set +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +CONFIG_DISCONTIGMEM_MANUAL=y +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_DISCONTIGMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_NEED_MULTIPLE_NODES=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_IRAM_START=0x00f00000 +CONFIG_IRAM_SIZE=0x00008000 CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_PREEMPT=y -# CONFIG_HAVE_DEC_LOCK is not set # CONFIG_SMP is not set +CONFIG_NODES_SHIFT=1 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # -# CONFIG_PCI is not set # CONFIG_ISA is not set # @@ -103,11 +142,12 @@ CONFIG_PREEMPT=y CONFIG_PCCARD=y # CONFIG_PCMCIA_DEBUG is not set CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y # # PC-card bridges # -# CONFIG_TCIC is not set # CONFIG_M32R_CFC is not set # @@ -120,6 +160,94 @@ CONFIG_PCMCIA=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + # # Device Drivers # @@ -129,7 +257,13 @@ CONFIG_BINFMT_ELF=y # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set +CONFIG_FW_LOADER=y +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set # # Memory Technology Devices (MTD) @@ -148,7 +282,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # # Block devices # -# CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set @@ -156,23 +289,21 @@ CONFIG_BLK_DEV_NBD=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_BLK_DEV_INITRD is not set -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set # -# IO Schedulers +# Misc devices # -CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set +# CONFIG_TIFM_CORE is not set # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # @@ -200,7 +331,9 @@ CONFIG_IDE_GENERIC=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set CONFIG_SCSI=m +# CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y # @@ -212,6 +345,7 @@ CONFIG_BLK_DEV_SD=m CONFIG_BLK_DEV_SR=m # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs @@ -221,16 +355,18 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_LOGGING is not set # -# SCSI Transport Attributes +# SCSI Transports # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set # # SCSI low-level drivers # -# CONFIG_SCSI_SATA is not set +# CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_DEBUG is not set # @@ -242,6 +378,10 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_PCMCIA_QLOGIC is not set # CONFIG_PCMCIA_SYM53C500 is not set +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# + # # Multi-device support (RAID and LVM) # @@ -250,6 +390,7 @@ CONFIG_SCSI_MULTI_LUN=y # # Fusion MPT device support # +# CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support @@ -260,75 +401,19 @@ CONFIG_SCSI_MULTI_LUN=y # # -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing +# Network device support # -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# +# PHY device support +# +# CONFIG_PHYLIB is not set + # # Ethernet (10 or 100Mbit) # @@ -367,6 +452,8 @@ CONFIG_SMC91X=y # CONFIG_SLIP is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -382,6 +469,7 @@ CONFIG_SMC91X=y # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces @@ -410,7 +498,6 @@ CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_LIBPS2 is not set # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices @@ -418,6 +505,7 @@ CONFIG_SOUND_GAMEPORT=y CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -432,7 +520,6 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_M32R_SIO=y CONFIG_SERIAL_M32R_SIO_CONSOLE=y -# CONFIG_SERIAL_M32R_PLDSIO is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -446,59 +533,78 @@ CONFIG_LEGACY_PTY_COUNT=256 # Watchdog Cards # # CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y # CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # # Ftape, the floppy tape device driver # -# CONFIG_DRM is not set # # PCMCIA character devices # # CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set # CONFIG_RAW_DRIVER is not set # # TPM devices # +# CONFIG_TCG_TPM is not set # # I2C support # # CONFIG_I2C is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # # CONFIG_W1 is not set # -# Misc devices +# Hardware Monitoring support # +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_HWMON_DEBUG_CHIP is not set # # Multimedia devices # CONFIG_VIDEO_DEV=y +CONFIG_VIDEO_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +CONFIG_VIDEO_V4L2=y # -# Video For Linux +# Video Capture Adapters # # -# Video Adapters +# Video Capture Adapters # +# CONFIG_VIDEO_ADV_DEBUG is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +# CONFIG_VIDEO_VIVI is not set # CONFIG_VIDEO_CPIA is not set # CONFIG_VIDEO_M32R_AR is not set # # Radio Adapters # -# CONFIG_RADIO_MAESTRO is not set # # Digital Video Broadcasting Devices @@ -508,6 +614,7 @@ CONFIG_VIDEO_DEV=y # # Graphics support # +CONFIG_FIRMWARE_EDID=y # CONFIG_FB is not set # @@ -515,6 +622,7 @@ CONFIG_VIDEO_DEV=y # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -526,6 +634,11 @@ CONFIG_DUMMY_CONSOLE=y # # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# # # USB Gadget Support @@ -537,39 +650,74 @@ CONFIG_DUMMY_CONSOLE=y # # CONFIG_MMC is not set +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + # # InfiniBand support # -# CONFIG_INFINIBAND is not set + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# # # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set -CONFIG_EXT3_FS=m +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=m +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y CONFIG_JBD_DEBUG=y CONFIG_FS_MBCACHE=y -CONFIG_REISERFS_FS=m -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -# CONFIG_REISERFS_FS_XATTR is not set +# CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set - -# -# XFS support -# +# CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -595,15 +743,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y -CONFIG_DEVFS_FS=y -CONFIG_DEVFS_MOUNT=y -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -627,12 +773,14 @@ CONFIG_RAMFS=y # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set @@ -641,6 +789,7 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -701,10 +850,16 @@ CONFIG_NLS_DEFAULT="iso8859-1" # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_FS is not set # CONFIG_FRAME_POINTER is not set +# CONFIG_UNWIND_INFO is not set +# CONFIG_HEADERS_CHECK is not set # # Security options @@ -717,13 +872,10 @@ CONFIG_LOG_BUF_SHIFT=14 # # CONFIG_CRYPTO is not set -# -# Hardware crypto devices -# - # # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set diff --git a/arch/m32r/mappi3/defconfig.smp b/arch/m32r/mappi3/defconfig.smp index 2eebe75fc071..2f352267a6d9 100644 --- a/arch/m32r/mappi3/defconfig.smp +++ b/arch/m32r/mappi3/defconfig.smp @@ -1,21 +1,18 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc5 -# Tue May 31 17:55:34 2005 +# Linux kernel version: 2.6.19 +# Mon Dec 11 19:57:33 2006 # CONFIG_M32R=y -# CONFIG_UID16 is not set CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options # CONFIG_EXPERIMENTAL=y -# CONFIG_CLEAN_COMPILE is not set -CONFIG_BROKEN=y -CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -23,32 +20,39 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -56,12 +60,30 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y CONFIG_STOP_MACHINE=y +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_BLK_DEV_IO_TRACE is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" + # # Processor type and features # @@ -72,8 +94,10 @@ CONFIG_STOP_MACHINE=y # CONFIG_PLAT_OAKS32R is not set # CONFIG_PLAT_MAPPI2 is not set CONFIG_PLAT_MAPPI3=y +# CONFIG_PLAT_M32104UT is not set CONFIG_CHIP_M32700=y # CONFIG_CHIP_M32102 is not set +# CONFIG_CHIP_M32104 is not set # CONFIG_CHIP_VDEC2 is not set # CONFIG_CHIP_OPSP is not set CONFIG_MMU=y @@ -87,23 +111,33 @@ CONFIG_TIMER_DIVIDE=128 CONFIG_MEMORY_START=0x08000000 CONFIG_MEMORY_SIZE=0x08000000 CONFIG_NOHIGHMEM=y +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +CONFIG_DISCONTIGMEM_MANUAL=y +# CONFIG_SPARSEMEM_MANUAL is not set CONFIG_DISCONTIGMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_NEED_MULTIPLE_NODES=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set CONFIG_IRAM_START=0x00f00000 CONFIG_IRAM_SIZE=0x00080000 CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_PREEMPT=y -# CONFIG_HAVE_DEC_LOCK is not set CONFIG_SMP=y # CONFIG_CHIP_M32700_TS1 is not set CONFIG_NR_CPUS=2 -# CONFIG_NUMA is not set +CONFIG_NODES_SHIFT=1 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # -# CONFIG_PCI is not set # CONFIG_ISA is not set # @@ -112,11 +146,12 @@ CONFIG_NR_CPUS=2 CONFIG_PCCARD=y # CONFIG_PCMCIA_DEBUG is not set CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y # # PC-card bridges # -# CONFIG_TCIC is not set # CONFIG_M32R_PCC is not set # CONFIG_M32R_CFC is not set @@ -130,6 +165,93 @@ CONFIG_PCMCIA=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +# CONFIG_PACKET is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + # # Device Drivers # @@ -140,6 +262,12 @@ CONFIG_BINFMT_ELF=y CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set # # Memory Technology Devices (MTD) @@ -162,6 +290,8 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set # # RAM/ROM/Flash chip drivers @@ -187,6 +317,7 @@ CONFIG_MTD_CFI_I2=y # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers @@ -194,7 +325,6 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set # CONFIG_MTD_BLOCK2MTD is not set # @@ -209,6 +339,11 @@ CONFIG_MTD_CFI_I2=y # # CONFIG_MTD_NAND is not set +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + # # Parallel port support # @@ -221,7 +356,6 @@ CONFIG_MTD_CFI_I2=y # # Block devices # -# CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set @@ -229,23 +363,21 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set # -# IO Schedulers +# Misc devices # -CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set +# CONFIG_TIFM_CORE is not set # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # @@ -254,7 +386,7 @@ CONFIG_BLK_DEV_IDE=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECS=y +CONFIG_BLK_DEV_IDECS=m CONFIG_BLK_DEV_IDECD=m # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set @@ -272,7 +404,13 @@ CONFIG_IDE_GENERIC=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# # # Multi-device support (RAID and LVM) @@ -282,85 +420,30 @@ CONFIG_IDE_GENERIC=y # # Fusion MPT device support # +# CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # -# CONFIG_IEEE1394 is not set # # I2O device support # # -# Networking support +# Network device support # -CONFIG_NET=y - -# -# Networking options -# -# CONFIG_PACKET is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# +# PHY device support +# +# CONFIG_PHYLIB is not set + # # Ethernet (10 or 100Mbit) # @@ -399,6 +482,8 @@ CONFIG_SMC91X=y # CONFIG_SLIP is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -414,6 +499,7 @@ CONFIG_SMC91X=y # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces @@ -445,7 +531,6 @@ CONFIG_SERIO=y # CONFIG_SERIO_LIBPS2 is not set # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices @@ -465,7 +550,6 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_M32R_SIO=y CONFIG_SERIAL_M32R_SIO_CONSOLE=y -# CONFIG_SERIAL_M32R_PLDSIO is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -479,39 +563,53 @@ CONFIG_LEGACY_PTY_COUNT=256 # Watchdog Cards # # CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y # CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # # Ftape, the floppy tape device driver # -# CONFIG_DRM is not set # # PCMCIA character devices # # CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set # CONFIG_RAW_DRIVER is not set # # TPM devices # +# CONFIG_TCG_TPM is not set # # I2C support # # CONFIG_I2C is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # # CONFIG_W1 is not set # -# Misc devices +# Hardware Monitoring support # +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_HWMON_DEBUG_CHIP is not set # # Multimedia devices @@ -526,7 +624,9 @@ CONFIG_LEGACY_PTY_COUNT=256 # # Graphics support # +CONFIG_FIRMWARE_EDID=y # CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -538,6 +638,11 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# # # USB Gadget Support @@ -549,36 +654,74 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_MMC is not set +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + # # InfiniBand support # -# CONFIG_INFINIBAND is not set + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# # # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set - -# -# XFS support -# +# CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set CONFIG_ROMFS_FS=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -603,16 +746,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y -CONFIG_DEVFS_FS=y -CONFIG_DEVFS_MOUNT=y -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set -# CONFIG_HUGETLBFS is not set +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -629,8 +769,9 @@ CONFIG_JFFS_FS_VERBOSE=0 CONFIG_JFFS_PROC_FS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 -# CONFIG_JFFS2_FS_NAND is not set -# CONFIG_JFFS2_FS_NOR_ECC is not set +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y @@ -647,12 +788,14 @@ CONFIG_JFFS2_RTIME=y # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set @@ -661,6 +804,7 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -721,10 +865,16 @@ CONFIG_NLS_DEFAULT="iso8859-1" # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=15 # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_FS is not set # CONFIG_FRAME_POINTER is not set +# CONFIG_UNWIND_INFO is not set +# CONFIG_HEADERS_CHECK is not set # # Security options @@ -737,14 +887,11 @@ CONFIG_LOG_BUF_SHIFT=15 # # CONFIG_CRYPTO is not set -# -# Hardware crypto devices -# - # # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y diff --git a/arch/m32r/oaks32r/defconfig.nommu b/arch/m32r/oaks32r/defconfig.nommu index 3f9fe519acb2..aaa00828e0d3 100644 --- a/arch/m32r/oaks32r/defconfig.nommu +++ b/arch/m32r/oaks32r/defconfig.nommu @@ -1,19 +1,18 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc5 -# Fri Jun 3 16:22:04 2005 +# Linux kernel version: 2.6.19 +# Tue Dec 12 12:09:17 2006 # CONFIG_M32R=y -# CONFIG_UID16 is not set CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -22,28 +21,35 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SYSVIPC is not set # CONFIG_POSIX_MQUEUE is not set CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -51,11 +57,29 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_BLK_DEV_IO_TRACE is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" + # # Processor type and features # @@ -66,8 +90,10 @@ CONFIG_KMOD=y CONFIG_PLAT_OAKS32R=y # CONFIG_PLAT_MAPPI2 is not set # CONFIG_PLAT_MAPPI3 is not set +# CONFIG_PLAT_M32104UT is not set # CONFIG_CHIP_M32700 is not set CONFIG_CHIP_M32102=y +# CONFIG_CHIP_M32104 is not set # CONFIG_CHIP_VDEC2 is not set # CONFIG_CHIP_OPSP is not set CONFIG_ISA_M32R=y @@ -77,18 +103,31 @@ CONFIG_TIMER_DIVIDE=128 CONFIG_MEMORY_START=0x01000000 CONFIG_MEMORY_SIZE=0x00800000 CONFIG_NOHIGHMEM=y -# CONFIG_DISCONTIGMEM is not set +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +CONFIG_DISCONTIGMEM_MANUAL=y +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_DISCONTIGMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_NEED_MULTIPLE_NODES=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_IRAM_START=0x00f00000 +CONFIG_IRAM_SIZE=0x00010000 CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_PREEMPT=y -# CONFIG_HAVE_DEC_LOCK is not set # CONFIG_SMP is not set +CONFIG_NODES_SHIFT=1 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # -# CONFIG_PCI is not set # CONFIG_ISA is not set # @@ -108,6 +147,94 @@ CONFIG_BINFMT_FLAT=y # CONFIG_BINFMT_SHARED_FLAT is not set # CONFIG_BINFMT_MISC is not set +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + # # Device Drivers # @@ -118,6 +245,12 @@ CONFIG_BINFMT_FLAT=y CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set # # Memory Technology Devices (MTD) @@ -136,7 +269,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # # Block devices # -# CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set @@ -144,18 +276,15 @@ CONFIG_BLK_DEV_NBD=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_BLK_DEV_INITRD is not set -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set # -# IO Schedulers +# Misc devices # -CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set +# CONFIG_TIFM_CORE is not set # # ATA/ATAPI/MFM/RLL support @@ -165,7 +294,13 @@ CONFIG_IOSCHED_CFQ=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# # # Multi-device support (RAID and LVM) @@ -175,6 +310,7 @@ CONFIG_IOSCHED_CFQ=y # # Fusion MPT device support # +# CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support @@ -185,75 +321,18 @@ CONFIG_IOSCHED_CFQ=y # # -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing +# Network device support # -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# +# PHY device support +# + # # Ethernet (10 or 100Mbit) # @@ -285,6 +364,8 @@ CONFIG_NE2000=y # CONFIG_SLIP is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -300,6 +381,7 @@ CONFIG_NE2000=y # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces @@ -328,7 +410,6 @@ CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_LIBPS2 is not set # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices @@ -348,7 +429,6 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_M32R_SIO=y CONFIG_SERIAL_M32R_SIO_CONSOLE=y -# CONFIG_SERIAL_M32R_PLDSIO is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -362,34 +442,46 @@ CONFIG_LEGACY_PTY_COUNT=256 # Watchdog Cards # # CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y # CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # # Ftape, the floppy tape device driver # -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set # # TPM devices # +# CONFIG_TCG_TPM is not set # # I2C support # # CONFIG_I2C is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # # CONFIG_W1 is not set # -# Misc devices +# Hardware Monitoring support # +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_HWMON_DEBUG_CHIP is not set # # Multimedia devices @@ -404,7 +496,9 @@ CONFIG_LEGACY_PTY_COUNT=256 # # Graphics support # +CONFIG_FIRMWARE_EDID=y # CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -416,6 +510,11 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# # # USB Gadget Support @@ -427,10 +526,44 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_MMC is not set +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + # # InfiniBand support # -# CONFIG_INFINIBAND is not set + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# # # File systems @@ -438,20 +571,22 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set +# CONFIG_EXT4DEV_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set - -# -# XFS support -# +# CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -470,13 +605,12 @@ CONFIG_DNOTIFY=y # Pseudo filesystems # CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -CONFIG_DEVPTS_FS_XATTR=y -CONFIG_DEVPTS_FS_SECURITY=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -500,12 +634,14 @@ CONFIG_RAMFS=y # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set @@ -514,6 +650,7 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -574,10 +711,16 @@ CONFIG_NLS_DEFAULT="iso8859-1" # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_FS is not set # CONFIG_FRAME_POINTER is not set +# CONFIG_UNWIND_INFO is not set +# CONFIG_HEADERS_CHECK is not set # # Security options @@ -590,13 +733,10 @@ CONFIG_LOG_BUF_SHIFT=14 # # CONFIG_CRYPTO is not set -# -# Hardware crypto devices -# - # # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set diff --git a/arch/m32r/opsput/defconfig.opsput b/arch/m32r/opsput/defconfig.opsput index 66adec6a701a..461f95e72d17 100644 --- a/arch/m32r/opsput/defconfig.opsput +++ b/arch/m32r/opsput/defconfig.opsput @@ -1,19 +1,18 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc5 -# Fri Jun 3 16:22:06 2005 +# Linux kernel version: 2.6.19 +# Wed Dec 13 18:34:36 2006 # CONFIG_M32R=y -# CONFIG_UID16 is not set CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -21,32 +20,39 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set # CONFIG_POSIX_MQUEUE is not set CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y # CONFIG_IKCONFIG_PROC is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -54,11 +60,29 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_BLK_DEV_IO_TRACE is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" + # # Processor type and features # @@ -69,8 +93,10 @@ CONFIG_PLAT_OPSPUT=y # CONFIG_PLAT_OAKS32R is not set # CONFIG_PLAT_MAPPI2 is not set # CONFIG_PLAT_MAPPI3 is not set +# CONFIG_PLAT_M32104UT is not set # CONFIG_CHIP_M32700 is not set # CONFIG_CHIP_M32102 is not set +# CONFIG_CHIP_M32104 is not set # CONFIG_CHIP_VDEC2 is not set CONFIG_CHIP_OPSP=y CONFIG_MMU=y @@ -84,17 +110,31 @@ CONFIG_TIMER_DIVIDE=128 CONFIG_MEMORY_START=0x08000000 CONFIG_MEMORY_SIZE=0x01000000 CONFIG_NOHIGHMEM=y -# CONFIG_DISCONTIGMEM is not set +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +CONFIG_DISCONTIGMEM_MANUAL=y +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_DISCONTIGMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_NEED_MULTIPLE_NODES=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_IRAM_START=0x00f00000 +CONFIG_IRAM_SIZE=0x00010000 CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y # CONFIG_PREEMPT is not set # CONFIG_SMP is not set +CONFIG_NODES_SHIFT=1 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # -# CONFIG_PCI is not set # CONFIG_ISA is not set # @@ -103,13 +143,15 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_PCCARD=y # CONFIG_PCMCIA_DEBUG is not set CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y # # PC-card bridges # -# CONFIG_TCIC is not set CONFIG_M32R_CFC=y CONFIG_M32R_CFC_NUM=1 +CONFIG_PCCARD_NONSTATIC=y # # PCI Hotplug Support @@ -121,6 +163,94 @@ CONFIG_M32R_CFC_NUM=1 CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + # # Device Drivers # @@ -130,8 +260,14 @@ CONFIG_BINFMT_ELF=y # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set +CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set # # Memory Technology Devices (MTD) @@ -150,7 +286,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # # Block devices # -# CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set @@ -158,18 +293,15 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_BLK_DEV_INITRD is not set -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set # -# IO Schedulers +# Misc devices # -CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set +# CONFIG_TIFM_CORE is not set # # ATA/ATAPI/MFM/RLL support @@ -179,7 +311,9 @@ CONFIG_IOSCHED_CFQ=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set CONFIG_SCSI=m +# CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y # @@ -191,6 +325,7 @@ CONFIG_BLK_DEV_SD=m CONFIG_BLK_DEV_SR=m # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs @@ -200,16 +335,18 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_LOGGING is not set # -# SCSI Transport Attributes +# SCSI Transports # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set # # SCSI low-level drivers # -# CONFIG_SCSI_SATA is not set +# CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_DEBUG is not set # @@ -221,6 +358,10 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_PCMCIA_QLOGIC is not set # CONFIG_PCMCIA_SYM53C500 is not set +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# + # # Multi-device support (RAID and LVM) # @@ -229,6 +370,7 @@ CONFIG_SCSI_MULTI_LUN=y # # Fusion MPT device support # +# CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support @@ -239,75 +381,19 @@ CONFIG_SCSI_MULTI_LUN=y # # -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) +# Network device support # -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# +# PHY device support +# +# CONFIG_PHYLIB is not set + # # Ethernet (10 or 100Mbit) # @@ -346,6 +432,8 @@ CONFIG_SMC91X=y # CONFIG_SLIP is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -361,6 +449,7 @@ CONFIG_SMC91X=y # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces @@ -389,7 +478,6 @@ CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_LIBPS2 is not set # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices @@ -423,8 +511,8 @@ CONFIG_LEGACY_PTY_COUNT=256 # Watchdog Cards # # CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y # CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set CONFIG_DS1302=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set @@ -432,31 +520,45 @@ CONFIG_DS1302=y # # Ftape, the floppy tape device driver # -# CONFIG_DRM is not set # # PCMCIA character devices # # CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set # CONFIG_RAW_DRIVER is not set # # TPM devices # +# CONFIG_TCG_TPM is not set # # I2C support # # CONFIG_I2C is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # # CONFIG_W1 is not set # -# Misc devices +# Hardware Monitoring support # +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_HWMON_DEBUG_CHIP is not set # # Multimedia devices @@ -471,7 +573,9 @@ CONFIG_DS1302=y # # Graphics support # +CONFIG_FIRMWARE_EDID=y # CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -483,6 +587,11 @@ CONFIG_DS1302=y # # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# # # USB Gadget Support @@ -494,39 +603,74 @@ CONFIG_DS1302=y # # CONFIG_MMC is not set +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + # # InfiniBand support # -# CONFIG_INFINIBAND is not set + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# # # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set -CONFIG_EXT3_FS=m +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=m +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y CONFIG_JBD_DEBUG=y CONFIG_FS_MBCACHE=y -CONFIG_REISERFS_FS=m -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -# CONFIG_REISERFS_FS_XATTR is not set +# CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set - -# -# XFS support -# +# CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -552,15 +696,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y -CONFIG_DEVFS_FS=y -CONFIG_DEVFS_MOUNT=y -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -584,12 +726,14 @@ CONFIG_RAMFS=y # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set @@ -598,6 +742,7 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -658,21 +803,32 @@ CONFIG_NLS_DEFAULT="iso8859-1" # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y +CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RWSEMS is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set # CONFIG_FRAME_POINTER is not set +# CONFIG_UNWIND_INFO is not set +CONFIG_FORCED_INLINING=y +# CONFIG_HEADERS_CHECK is not set +# CONFIG_RCU_TORTURE_TEST is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # # Security options @@ -685,13 +841,10 @@ CONFIG_DEBUG_INFO=y # # CONFIG_CRYPTO is not set -# -# Hardware crypto devices -# - # # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set -- cgit v1.2.3 From 3d60f849341ac00e3dc47a3af94aaf9ba46d00fb Mon Sep 17 00:00:00 2001 From: Hirokazu Takata Date: Sat, 10 Feb 2007 01:43:39 -0800 Subject: [PATCH] m32r: fix kernel entry address of vmlinux This patch fixes the kernel entry point address of vmlinux. The m32r kernel entry address is 0x08002000 (physical). But, so far, the ENTRY point written in vmlinux.lds.S was not point the correct kernel entry address. (before fix) $ objdump -x vmlinux vmlinux: file format elf32-m32r-linux vmlinux architecture: m32r2, flags 0x00000112: EXEC_P, HAS_SYMS, D_PAGED start address 0x88002090 /* NG */ : Sections: Idx Name Size VMA LMA File off Algn 0 .empty_zero_page 00001000 88001000 88001000 00001000 2**12 CONTENTS, ALLOC, LOAD, DATA 1 .boot 0000008c 88002000 88002000 00002000 2**2 CONTENTS, ALLOC, LOAD, READONLY, CODE 2 .text 001ab694 88002090 88002090 00002090 2**4 CONTENTS, ALLOC, LOAD, READONLY, CODE : (after fix) $ objdump -x vmlinux vmlinux: file format elf32-m32r-linux vmlinux architecture: m32r2, flags 0x00000112: EXEC_P, HAS_SYMS, D_PAGED start address 0x08002000 /* OK */ : This fix also remedies the following GDB error message (of gdb-6.4 or after) at the first operation of kernel debugging: "Previous frame identical to this frame (corrupt stack?)". Signed-off-by: Hirokazu Takata Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/m32r/Makefile | 2 +- arch/m32r/kernel/vmlinux.lds.S | 5 ++++- 2 files changed, 5 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/m32r/Makefile b/arch/m32r/Makefile index f219c47d334f..cdf63b210c53 100644 --- a/arch/m32r/Makefile +++ b/arch/m32r/Makefile @@ -7,7 +7,7 @@ LDFLAGS := OBJCOPYFLAGS := -O binary -R .note -R .comment -S -LDFLAGS_vmlinux := -e startup_32 +LDFLAGS_vmlinux := CFLAGS += -pipe -fno-schedule-insns CFLAGS_KERNEL += -mmodel=medium diff --git a/arch/m32r/kernel/vmlinux.lds.S b/arch/m32r/kernel/vmlinux.lds.S index 358b9cee2c65..c497a2fc88ed 100644 --- a/arch/m32r/kernel/vmlinux.lds.S +++ b/arch/m32r/kernel/vmlinux.lds.S @@ -6,12 +6,15 @@ #include OUTPUT_ARCH(m32r) -ENTRY(startup_32) #if defined(__LITTLE_ENDIAN__) jiffies = jiffies_64; #else jiffies = jiffies_64 + 4; #endif + +kernel_entry = boot - 0x80000000; +ENTRY(kernel_entry) + SECTIONS { . = CONFIG_MEMORY_START + __PAGE_OFFSET; -- cgit v1.2.3 From fabb626ad6a3744b9f0eaae215a2418d521c1e14 Mon Sep 17 00:00:00 2001 From: Hirokazu Takata Date: Sat, 10 Feb 2007 01:43:40 -0800 Subject: [PATCH] m32r: cosmetic updates and trivial fixes Cosmetic updates and trivial fixes of m32r arch-dependent files. - Remove RCS ID strings and trailing white lines - Other misc. cosmetic updates Signed-off-by: Hirokazu Takata Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/m32r/kernel/head.S | 2 -- arch/m32r/lib/ashxdi3.S | 3 --- arch/m32r/lib/checksum.S | 3 +-- arch/m32r/lib/delay.c | 2 -- arch/m32r/lib/memcpy.S | 2 -- arch/m32r/lib/memset.S | 2 -- arch/m32r/lib/strlen.S | 2 -- arch/m32r/mm/fault-nommu.c | 5 +---- arch/m32r/mm/mmu.S | 5 +---- 9 files changed, 3 insertions(+), 23 deletions(-) (limited to 'arch') diff --git a/arch/m32r/kernel/head.S b/arch/m32r/kernel/head.S index 0d3c8ee0e03d..dab7436d7bbe 100644 --- a/arch/m32r/kernel/head.S +++ b/arch/m32r/kernel/head.S @@ -7,8 +7,6 @@ * Hitoshi Yamamoto */ -/* $Id$ */ - #include __INIT __INITDATA diff --git a/arch/m32r/lib/ashxdi3.S b/arch/m32r/lib/ashxdi3.S index 107594b65d58..7fc0c19801ba 100644 --- a/arch/m32r/lib/ashxdi3.S +++ b/arch/m32r/lib/ashxdi3.S @@ -4,8 +4,6 @@ * Copyright (C) 2001,2002 Hiroyuki Kondo, and Hirokazu Takata * */ -/* $Id$ */ - ; ; input (r0,r1) src @@ -293,4 +291,3 @@ __lshrdi3: #endif /* not CONFIG_ISA_DUAL_ISSUE */ .end - diff --git a/arch/m32r/lib/checksum.S b/arch/m32r/lib/checksum.S index cfbe00e5184a..0af0360c76d9 100644 --- a/arch/m32r/lib/checksum.S +++ b/arch/m32r/lib/checksum.S @@ -25,8 +25,6 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ -/* $Id$ */ - #include #include @@ -319,3 +317,4 @@ ENTRY(csum_partial_copy_generic) nop nop + .end diff --git a/arch/m32r/lib/delay.c b/arch/m32r/lib/delay.c index 06382a38c318..59bfc34e0d9f 100644 --- a/arch/m32r/lib/delay.c +++ b/arch/m32r/lib/delay.c @@ -5,8 +5,6 @@ * Copyright (c) 2004 Hirokazu Takata */ -/* $Id$ */ - #include #ifdef CONFIG_SMP #include diff --git a/arch/m32r/lib/memcpy.S b/arch/m32r/lib/memcpy.S index 2089a215314e..05987cd639ef 100644 --- a/arch/m32r/lib/memcpy.S +++ b/arch/m32r/lib/memcpy.S @@ -10,8 +10,6 @@ * src: r1 * n : r2 */ -/* $Id$ */ - .text #include diff --git a/arch/m32r/lib/memset.S b/arch/m32r/lib/memset.S index b47fa3537aa4..2b2831a37927 100644 --- a/arch/m32r/lib/memset.S +++ b/arch/m32r/lib/memset.S @@ -12,8 +12,6 @@ * ret: r0 * */ -/* $Id$ */ - .text .global memset diff --git a/arch/m32r/lib/strlen.S b/arch/m32r/lib/strlen.S index 5f41aacd7b3e..916de9e8f801 100644 --- a/arch/m32r/lib/strlen.S +++ b/arch/m32r/lib/strlen.S @@ -6,8 +6,6 @@ * size_t strlen(const char *s); * */ -/* $Id$ */ - #include #include diff --git a/arch/m32r/mm/fault-nommu.c b/arch/m32r/mm/fault-nommu.c index 03fc4c858e0e..0a09cc01212b 100644 --- a/arch/m32r/mm/fault-nommu.c +++ b/arch/m32r/mm/fault-nommu.c @@ -7,8 +7,6 @@ * Copyright (C) 1995 Linus Torvalds */ -/* $Id: fault-nommu.c,v 1.1 2004/03/30 06:40:59 sakugawa Exp $ */ - #include #include #include @@ -67,7 +65,7 @@ void bust_spinlocks(int yes) * without oops_in_progress set so that printk will give klogd * a poke. Hold onto your hats... */ - console_loglevel = 15; /* NMI oopser may have shut the console up */ + console_loglevel = 15; /* NMI oopser may have shut the console up */ printk(" "); console_loglevel = loglevel_save; } @@ -161,4 +159,3 @@ void local_flush_tlb_all(void) { BUG(); } - diff --git a/arch/m32r/mm/mmu.S b/arch/m32r/mm/mmu.S index 9a4d40b3d6a2..8bb74b10dca7 100644 --- a/arch/m32r/mm/mmu.S +++ b/arch/m32r/mm/mmu.S @@ -4,8 +4,6 @@ * Copyright (C) 2001 by Hiroyuki Kondo */ -/* $Id: mmu.S,v 1.15 2004/03/16 02:56:27 takata Exp $ */ - #include #include #include @@ -345,5 +343,4 @@ ENTRY(m32r_otlb_entrys) #endif /* CONFIG_MMU */ -.end - + .end -- cgit v1.2.3 From bf0059b23fd2f0b304f647d87fad0aa626ecf0c0 Mon Sep 17 00:00:00 2001 From: "Ahmed S. Darwish" Date: Sat, 10 Feb 2007 01:43:46 -0800 Subject: [PATCH] M68KNOMMU: user ARRAY_SIZE macro when appropriate Use ARRAY_SIZE macro already defined in linux/kernel.h Signed-off-by: Ahmed S. Darwish Signed-off-by: Greg Ungerer Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/m68knommu/kernel/ptrace.c | 4 ++-- arch/m68knommu/kernel/traps.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/m68knommu/kernel/ptrace.c b/arch/m68knommu/kernel/ptrace.c index 9130119537b9..72d349623575 100644 --- a/arch/m68knommu/kernel/ptrace.c +++ b/arch/m68knommu/kernel/ptrace.c @@ -62,7 +62,7 @@ static inline long get_reg(struct task_struct *task, int regno) if (regno == PT_USP) addr = &task->thread.usp; - else if (regno < sizeof(regoff)/sizeof(regoff[0])) + else if (regno < ARRAY_SIZE(regoff)) addr = (unsigned long *)(task->thread.esp0 + regoff[regno]); else return 0; @@ -79,7 +79,7 @@ static inline int put_reg(struct task_struct *task, int regno, if (regno == PT_USP) addr = &task->thread.usp; - else if (regno < sizeof(regoff)/sizeof(regoff[0])) + else if (regno < ARRAY_SIZE(regoff)) addr = (unsigned long *) (task->thread.esp0 + regoff[regno]); else return -1; diff --git a/arch/m68knommu/kernel/traps.c b/arch/m68knommu/kernel/traps.c index 9129b3a5258b..bed5f47bf568 100644 --- a/arch/m68knommu/kernel/traps.c +++ b/arch/m68knommu/kernel/traps.c @@ -158,7 +158,7 @@ void show_stack(struct task_struct *task, unsigned long *stack) void bad_super_trap(struct frame *fp) { console_verbose(); - if (fp->ptregs.vector < 4*sizeof(vec_names)/sizeof(vec_names[0])) + if (fp->ptregs.vector < 4 * ARRAY_SIZE(vec_names)) printk (KERN_WARNING "*** %s *** FORMAT=%X\n", vec_names[(fp->ptregs.vector) >> 2], fp->ptregs.format); -- cgit v1.2.3 From ea5e1a827abe1e9ba1c8d214b7408b6c363d764a Mon Sep 17 00:00:00 2001 From: "Ahmed S. Darwish" Date: Sat, 10 Feb 2007 01:43:47 -0800 Subject: [PATCH] M68K: user ARRAY_SIZE macro when appropriate Use ARRAY_SIZE macro already defined in linux/kernel.h Signed-off-by: Ahmed S. Darwish Cc: Roman Zippel Cc: Geert Uytterhoeven Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/m68k/kernel/ptrace.c | 4 ++-- arch/m68k/kernel/traps.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/m68k/kernel/ptrace.c b/arch/m68k/kernel/ptrace.c index ef89060ea328..7fd2720c3841 100644 --- a/arch/m68k/kernel/ptrace.c +++ b/arch/m68k/kernel/ptrace.c @@ -76,7 +76,7 @@ static inline long get_reg(struct task_struct *task, int regno) if (regno == PT_USP) addr = &task->thread.usp; - else if (regno < sizeof(regoff)/sizeof(regoff[0])) + else if (regno < ARRAY_SIZE(regoff)) addr = (unsigned long *)(task->thread.esp0 + regoff[regno]); else return 0; @@ -93,7 +93,7 @@ static inline int put_reg(struct task_struct *task, int regno, if (regno == PT_USP) addr = &task->thread.usp; - else if (regno < sizeof(regoff)/sizeof(regoff[0])) + else if (regno < ARRAY_SIZE(regoff)) addr = (unsigned long *)(task->thread.esp0 + regoff[regno]); else return -1; diff --git a/arch/m68k/kernel/traps.c b/arch/m68k/kernel/traps.c index 759fa244e6cd..a27a4fa33296 100644 --- a/arch/m68k/kernel/traps.c +++ b/arch/m68k/kernel/traps.c @@ -1011,7 +1011,7 @@ EXPORT_SYMBOL(dump_stack); void bad_super_trap (struct frame *fp) { console_verbose(); - if (fp->ptregs.vector < 4*sizeof(vec_names)/sizeof(vec_names[0])) + if (fp->ptregs.vector < 4 * ARRAY_SIZE(vec_names)) printk ("*** %s *** FORMAT=%X\n", vec_names[(fp->ptregs.vector) >> 2], fp->ptregs.format); -- cgit v1.2.3 From 7c101b7b13707f84791441fd04f11cf710d0d2d9 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Sat, 10 Feb 2007 01:43:49 -0800 Subject: [PATCH] CRIS: local_irq_disable() is redundant after local_irq_save() arch/cris/arch-v10/kernel/time.c::get_ns_in_jiffie() contains local_irq_disable() call after local_irq_save(). This looks redundant. arch/cris/kernel/time.c::do_gettimeofday() contains local_irq_disable() call after local_irq_save(). This looks redundant. Signed-off-by: Jiri Kosina Cc: Mikael Starvik Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/cris/arch-v10/kernel/time.c | 1 - arch/cris/kernel/time.c | 1 - 2 files changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/cris/arch-v10/kernel/time.c b/arch/cris/arch-v10/kernel/time.c index ebacf1457d91..077e973c33f0 100644 --- a/arch/cris/arch-v10/kernel/time.c +++ b/arch/cris/arch-v10/kernel/time.c @@ -38,7 +38,6 @@ unsigned long get_ns_in_jiffie(void) unsigned long flags; local_irq_save(flags); - local_irq_disable(); timer_count = *R_TIMER0_DATA; presc_count = *R_TIM_PRESC_STATUS; /* presc_count might be wrapped */ diff --git a/arch/cris/kernel/time.c b/arch/cris/kernel/time.c index 0f9213cbd48e..22a1aa511aea 100644 --- a/arch/cris/kernel/time.c +++ b/arch/cris/kernel/time.c @@ -55,7 +55,6 @@ void do_gettimeofday(struct timeval *tv) unsigned long flags; signed long usec, sec; local_irq_save(flags); - local_irq_disable(); usec = do_gettimeoffset(); /* -- cgit v1.2.3 From 8447157a1ac467fae2125074f3693f557c8e05d3 Mon Sep 17 00:00:00 2001 From: "Ahmed S. Darwish" Date: Sat, 10 Feb 2007 01:43:51 -0800 Subject: [PATCH] CRIS: user ARRAY_SIZE macro when appropriate Use ARRAY_SIZE macro already defined in linux/kernel.h Signed-off-by: Ahmed S. Darwish Cc: Mikael Starvik Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/cris/arch-v10/drivers/axisflashmap.c | 3 +-- arch/cris/mm/tlb.c | 3 ++- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/cris/arch-v10/drivers/axisflashmap.c b/arch/cris/arch-v10/drivers/axisflashmap.c index ffade19a14e6..efd7b0f3a910 100644 --- a/arch/cris/arch-v10/drivers/axisflashmap.c +++ b/arch/cris/arch-v10/drivers/axisflashmap.c @@ -359,8 +359,7 @@ static struct mtd_info *flash_probe(void) * So we use the MTD concatenation layer instead of further * complicating the probing procedure. */ - mtd_cse = mtd_concat_create(mtds, - sizeof(mtds) / sizeof(mtds[0]), + mtd_cse = mtd_concat_create(mtds, ARRAY_SIZE(mtds), "cse0+cse1"); #else printk(KERN_ERR "%s and %s: Cannot concatenate due to kernel " diff --git a/arch/cris/mm/tlb.c b/arch/cris/mm/tlb.c index 0df390a656cd..c4a98e2e529e 100644 --- a/arch/cris/mm/tlb.c +++ b/arch/cris/mm/tlb.c @@ -8,6 +8,7 @@ */ #include +#include #include #define D(x) @@ -100,7 +101,7 @@ tlb_init(void) /* clear the page_id map */ - for (i = 1; i < sizeof (page_id_map) / sizeof (page_id_map[0]); i++) + for (i = 1; i < ARRAY_SIZE(page_id_map); i++) page_id_map[i] = NULL; /* invalidate the entire TLB */ -- cgit v1.2.3 From 5cf885d01f30be710a339976c485f92bb8a8946d Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Sat, 10 Feb 2007 01:43:51 -0800 Subject: [PATCH] CRIS: TLB handling: turn local_save_flags() + local_irq_disable() into local_irq_save() TLB handling for CRIS contains local_irq_disable() after local_save_flags(). Turn this into local_irq_save(). Signed-off-by: Jiri Kosina Cc: Mikael Starvik Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/cris/arch-v10/mm/tlb.c | 9 +++------ arch/cris/arch-v32/mm/tlb.c | 9 +++------ 2 files changed, 6 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/cris/arch-v10/mm/tlb.c b/arch/cris/arch-v10/mm/tlb.c index 70a5523eff78..7d9fec88dee5 100644 --- a/arch/cris/arch-v10/mm/tlb.c +++ b/arch/cris/arch-v10/mm/tlb.c @@ -42,8 +42,7 @@ flush_tlb_all(void) * in the same 4-way entry group. details.. */ - local_save_flags(flags); - local_irq_disable(); + local_irq_save(flags); for(i = 0; i < NUM_TLB_ENTRIES; i++) { *R_TLB_SELECT = ( IO_FIELD(R_TLB_SELECT, index, i) ); *R_TLB_HI = ( IO_FIELD(R_TLB_HI, page_id, INVALID_PAGEID ) | @@ -78,8 +77,7 @@ flush_tlb_mm(struct mm_struct *mm) * global pages. is it worth the extra I/O ? */ - local_save_flags(flags); - local_irq_disable(); + local_irq_save(flags); for(i = 0; i < NUM_TLB_ENTRIES; i++) { *R_TLB_SELECT = IO_FIELD(R_TLB_SELECT, index, i); if (IO_EXTRACT(R_TLB_HI, page_id, *R_TLB_HI) == page_id) { @@ -118,8 +116,7 @@ flush_tlb_page(struct vm_area_struct *vma, * and the virtual address requested */ - local_save_flags(flags); - local_irq_disable(); + local_irq_save(flags); for(i = 0; i < NUM_TLB_ENTRIES; i++) { unsigned long tlb_hi; *R_TLB_SELECT = IO_FIELD(R_TLB_SELECT, index, i); diff --git a/arch/cris/arch-v32/mm/tlb.c b/arch/cris/arch-v32/mm/tlb.c index 9d75d7692303..c2d12e9c40d7 100644 --- a/arch/cris/arch-v32/mm/tlb.c +++ b/arch/cris/arch-v32/mm/tlb.c @@ -54,8 +54,7 @@ __flush_tlb_all(void) * Mask with 0xf so similar TLB entries aren't written in the same 4-way * entry group. */ - local_save_flags(flags); - local_irq_disable(); + local_irq_save(flags); for (mmu = 1; mmu <= 2; mmu++) { SUPP_BANK_SEL(mmu); /* Select the MMU */ @@ -92,8 +91,7 @@ __flush_tlb_mm(struct mm_struct *mm) return; /* Mark the TLB entries that match the page_id as invalid. */ - local_save_flags(flags); - local_irq_disable(); + local_irq_save(flags); for (mmu = 1; mmu <= 2; mmu++) { SUPP_BANK_SEL(mmu); @@ -140,8 +138,7 @@ __flush_tlb_page(struct vm_area_struct *vma, unsigned long addr) * Invalidate those TLB entries that match both the mm context and the * requested virtual address. */ - local_save_flags(flags); - local_irq_disable(); + local_irq_save(flags); for (mmu = 1; mmu <= 2; mmu++) { SUPP_BANK_SEL(mmu); -- cgit v1.2.3 From d79a580936396bbcd2f4fae2c6215f9cf81e3c0d Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Sat, 10 Feb 2007 01:43:52 -0800 Subject: [PATCH] uml: console locking fixes Clean up the console driver locking. There are various problems here, including sleeping under a spinlock and spinlock recursion, some of which are fixed here. This patch deals with the locking involved with opens and closes. The problem is that an mconsole request to change a console's configuration can race with an open. Changing a configuration should only be done when a console isn't opened. Also, an open must be looking at a stable configuration. In addition, a get configuration request must observe the same locking since it must also see a stable configuration. With the old locking, it was possible for this to hang indefinitely in some cases because open would block for a long time waiting for a connection from the host while holding the lock needed by the mconsole request. As explained in the long comment, this is fixed by adding a spinlock for the use count and configuration and a mutex for the actual open and close. Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/drivers/line.c | 186 ++++++++++++++++++++++++++-------------- arch/um/drivers/stdio_console.c | 6 +- arch/um/include/line.h | 14 +-- 3 files changed, 134 insertions(+), 72 deletions(-) (limited to 'arch') diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c index 83301e1ef67c..799fca3644e9 100644 --- a/arch/um/drivers/line.c +++ b/arch/um/drivers/line.c @@ -191,7 +191,6 @@ void line_flush_buffer(struct tty_struct *tty) /*XXX: copied from line_write, verify if it is correct!*/ if(tty->stopped) return; - //return 0; spin_lock_irqsave(&line->lock, flags); err = flush_buffer(line); @@ -421,42 +420,84 @@ int line_setup_irq(int fd, int input, int output, struct line *line, void *data) return err; } +/* Normally, a driver like this can rely mostly on the tty layer + * locking, particularly when it comes to the driver structure. + * However, in this case, mconsole requests can come in "from the + * side", and race with opens and closes. + * + * The problem comes from line_setup not wanting to sleep if + * the device is open or being opened. This can happen because the + * first opener of a device is responsible for setting it up on the + * host, and that can sleep. The open of a port device will sleep + * until someone telnets to it. + * + * The obvious solution of putting everything under a mutex fails + * because then trying (and failing) to change the configuration of an + * open(ing) device will block until the open finishes. The right + * thing to happen is for it to fail immediately. + * + * We can put the opening (and closing) of the host device under a + * separate lock, but that has to be taken before the count lock is + * released. Otherwise, you open a window in which another open can + * come through and assume that the host side is opened and working. + * + * So, if the tty count is one, open will take the open mutex + * inside the count lock. Otherwise, it just returns. This will sleep + * if the last close is pending, and will block a setup or get_config, + * but that should not last long. + * + * So, what we end up with is that open and close take the count lock. + * If the first open or last close are happening, then the open mutex + * is taken inside the count lock and the host opening or closing is done. + * + * setup and get_config only take the count lock. setup modifies the + * device configuration only if the open count is zero. Arbitrarily + * long blocking of setup doesn't happen because something would have to be + * waiting for an open to happen. However, a second open with + * tty->count == 1 can't happen, and a close can't happen until the open + * had finished. + * + * We can't maintain our own count here because the tty layer doesn't + * match opens and closes. It will call close if an open failed, and + * a tty hangup will result in excess closes. So, we rely on + * tty->count instead. It is one on both the first open and last close. + */ + int line_open(struct line *lines, struct tty_struct *tty) { - struct line *line; + struct line *line = &lines[tty->index]; int err = -ENODEV; - line = &lines[tty->index]; - tty->driver_data = line; + spin_lock(&line->count_lock); + if(!line->valid) + goto out_unlock; + + err = 0; + if(tty->count > 1) + goto out_unlock; - /* The IRQ which takes this lock is not yet enabled and won't be run - * before the end, so we don't need to use spin_lock_irq.*/ - spin_lock(&line->lock); + mutex_lock(&line->open_mutex); + spin_unlock(&line->count_lock); tty->driver_data = line; line->tty = tty; - if(!line->valid) - goto out; - if(tty->count == 1){ - /* Here the device is opened, if necessary, and interrupt - * is registered. - */ - enable_chan(line); - INIT_DELAYED_WORK(&line->task, line_timer_cb); - - if(!line->sigio){ - chan_enable_winch(&line->chan_list, tty); - line->sigio = 1; - } + enable_chan(line); + INIT_DELAYED_WORK(&line->task, line_timer_cb); - chan_window_size(&line->chan_list, &tty->winsize.ws_row, - &tty->winsize.ws_col); + if(!line->sigio){ + chan_enable_winch(&line->chan_list, tty); + line->sigio = 1; } - err = 0; -out: - spin_unlock(&line->lock); + chan_window_size(&line->chan_list, &tty->winsize.ws_row, + &tty->winsize.ws_col); + + mutex_unlock(&line->open_mutex); + return err; + +out_unlock: + spin_unlock(&line->count_lock); return err; } @@ -466,25 +507,38 @@ void line_close(struct tty_struct *tty, struct file * filp) { struct line *line = tty->driver_data; - /* XXX: I assume this should be called in process context, not with - * interrupts disabled! - */ - spin_lock_irq(&line->lock); + /* If line_open fails (and tty->driver_data is never set), + * tty_open will call line_close. So just return in this case. + */ + if(line == NULL) + return; /* We ignore the error anyway! */ flush_buffer(line); - if(tty->count == 1){ - line->tty = NULL; - tty->driver_data = NULL; + spin_lock(&line->count_lock); + if(!line->valid) + goto out_unlock; + + if(tty->count > 1) + goto out_unlock; - if(line->sigio){ - unregister_winch(tty); - line->sigio = 0; - } + mutex_lock(&line->open_mutex); + spin_unlock(&line->count_lock); + + line->tty = NULL; + tty->driver_data = NULL; + + if(line->sigio){ + unregister_winch(tty); + line->sigio = 0; } - spin_unlock_irq(&line->lock); + mutex_unlock(&line->open_mutex); + return; + +out_unlock: + spin_unlock(&line->count_lock); } void close_lines(struct line *lines, int nlines) @@ -495,6 +549,30 @@ void close_lines(struct line *lines, int nlines) close_chan(&lines[i].chan_list, 0); } +static void setup_one_line(struct line *lines, int n, char *init, int init_prio) +{ + struct line *line = &lines[n]; + + spin_lock(&line->count_lock); + + if(line->tty != NULL){ + printk("line_setup - device %d is open\n", n); + goto out; + } + + if (line->init_pri <= init_prio){ + line->init_pri = init_prio; + if (!strcmp(init, "none")) + line->valid = 0; + else { + line->init_str = init; + line->valid = 1; + } + } +out: + spin_unlock(&line->count_lock); +} + /* Common setup code for both startup command line and mconsole initialization. * @lines contains the array (of size @num) to modify; * @init is the setup string; @@ -526,32 +604,11 @@ int line_setup(struct line *lines, unsigned int num, char *init) n, num - 1); return 0; } - else if (n >= 0){ - if (lines[n].tty != NULL) { - printk("line_setup - device %d is open\n", n); - return 0; - } - if (lines[n].init_pri <= INIT_ONE){ - lines[n].init_pri = INIT_ONE; - if (!strcmp(init, "none")) - lines[n].valid = 0; - else { - lines[n].init_str = init; - lines[n].valid = 1; - } - } - } + else if (n >= 0) + setup_one_line(lines, n, init, INIT_ONE); else { - for(i = 0; i < num; i++){ - if(lines[i].init_pri <= INIT_ALL){ - lines[i].init_pri = INIT_ALL; - if(!strcmp(init, "none")) lines[i].valid = 0; - else { - lines[i].init_str = init; - lines[i].valid = 1; - } - } - } + for(i = 0; i < num; i++) + setup_one_line(lines, i, init, INIT_ALL); } return n == -1 ? num : n; } @@ -602,13 +659,13 @@ int line_get_config(char *name, struct line *lines, unsigned int num, char *str, line = &lines[dev]; - spin_lock(&line->lock); + spin_lock(&line->count_lock); if(!line->valid) CONFIG_CHUNK(str, size, n, "none", 1); else if(line->tty == NULL) CONFIG_CHUNK(str, size, n, line->init_str, 1); else n = chan_config_string(&line->chan_list, str, size, error_out); - spin_unlock(&line->lock); + spin_unlock(&line->count_lock); return n; } @@ -688,6 +745,7 @@ void lines_init(struct line *lines, int nlines, struct chan_opts *opts) for(i = 0; i < nlines; i++){ line = &lines[i]; INIT_LIST_HEAD(&line->chan_list); + mutex_init(&line->open_mutex); if(line->init_str == NULL) continue; diff --git a/arch/um/drivers/stdio_console.c b/arch/um/drivers/stdio_console.c index 7a4897e27f42..9b2dd0b8a43b 100644 --- a/arch/um/drivers/stdio_console.c +++ b/arch/um/drivers/stdio_console.c @@ -83,9 +83,9 @@ static struct lines console_lines = LINES_INIT(MAX_TTYS); /* The array is initialized by line_init, which is an initcall. The * individual elements are protected by individual semaphores. */ -struct line vts[MAX_TTYS] = { LINE_INIT(CONFIG_CON_ZERO_CHAN, &driver), - [ 1 ... MAX_TTYS - 1 ] = - LINE_INIT(CONFIG_CON_CHAN, &driver) }; +static struct line vts[MAX_TTYS] = { LINE_INIT(CONFIG_CON_ZERO_CHAN, &driver), + [ 1 ... MAX_TTYS - 1 ] = + LINE_INIT(CONFIG_CON_CHAN, &driver) }; static int con_config(char *str) { diff --git a/arch/um/include/line.h b/arch/um/include/line.h index 5f232ae89fbb..b79643eeee08 100644 --- a/arch/um/include/line.h +++ b/arch/um/include/line.h @@ -11,6 +11,7 @@ #include "linux/tty.h" #include "linux/interrupt.h" #include "linux/spinlock.h" +#include "linux/mutex.h" #include "chan_user.h" #include "mconsole_kern.h" @@ -32,15 +33,17 @@ struct line_driver { struct line { struct tty_struct *tty; + spinlock_t count_lock; + int valid; + + struct mutex open_mutex; char *init_str; int init_pri; struct list_head chan_list; - int valid; - int count; - int throttled; + /*This lock is actually, mostly, local to*/ spinlock_t lock; - + int throttled; /* Yes, this is a real circular buffer. * XXX: And this should become a struct kfifo! * @@ -57,7 +60,8 @@ struct line { }; #define LINE_INIT(str, d) \ - { .init_str = str, \ + { .count_lock = SPIN_LOCK_UNLOCKED, \ + .init_str = str, \ .init_pri = INIT_STATIC, \ .valid = 1, \ .lock = SPIN_LOCK_UNLOCKED, \ -- cgit v1.2.3 From f28169d2000177e8b72ccc6d72887be779dceca8 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Sat, 10 Feb 2007 01:43:53 -0800 Subject: [PATCH] uml: return hotplug errors to host I noticed that errors happening while hotplugging devices from the host were never returned back to the mconsole client. In some cases, success was returned instead of even an information-free error. This patch cleans that up by having the low-level configuration code pass back an error string along with an error code. At the top level, which knows whether it is early boot time or responding to an mconsole request, the string is printk'd or returned to the mconsole client. There are also whitespace and trivial code cleanups in the surrounding code. Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/drivers/chan_kern.c | 77 +++++++---------------- arch/um/drivers/line.c | 66 ++++++++++++-------- arch/um/drivers/mconsole_kern.c | 40 ++++++++---- arch/um/drivers/net_kern.c | 97 ++++++++++++++--------------- arch/um/drivers/ssl.c | 24 +++++--- arch/um/drivers/stdio_console.c | 22 ++++--- arch/um/drivers/ubd_kern.c | 132 ++++++++++++++++++++++------------------ arch/um/include/chan_kern.h | 2 +- arch/um/include/line.h | 8 ++- arch/um/include/mconsole_kern.h | 15 +---- arch/um/kernel/tt/gdb.c | 4 +- arch/um/kernel/tt/gdb_kern.c | 4 +- 12 files changed, 253 insertions(+), 238 deletions(-) (limited to 'arch') diff --git a/arch/um/drivers/chan_kern.c b/arch/um/drivers/chan_kern.c index 7d4190e55654..4e7e3cfa21f9 100644 --- a/arch/um/drivers/chan_kern.c +++ b/arch/um/drivers/chan_kern.c @@ -19,44 +19,11 @@ #include "line.h" #include "os.h" -/* XXX: could well be moved to somewhere else, if needed. */ -static int my_printf(const char * fmt, ...) - __attribute__ ((format (printf, 1, 2))); - -static int my_printf(const char * fmt, ...) -{ - /* Yes, can be called on atomic context.*/ - char *buf = kmalloc(4096, GFP_ATOMIC); - va_list args; - int r; - - if (!buf) { - /* We print directly fmt. - * Yes, yes, yes, feel free to complain. */ - r = strlen(fmt); - } else { - va_start(args, fmt); - r = vsprintf(buf, fmt, args); - va_end(args); - fmt = buf; - } - - if (r) - r = os_write_file(1, fmt, r); - return r; - -} - #ifdef CONFIG_NOCONFIG_CHAN -/* Despite its name, there's no added trailing newline. */ -static int my_puts(const char * buf) +static void *not_configged_init(char *str, int device, + const struct chan_opts *opts) { - return os_write_file(1, buf, strlen(buf)); -} - -static void *not_configged_init(char *str, int device, struct chan_opts *opts) -{ - my_puts("Using a channel type which is configured out of " + printk("Using a channel type which is configured out of " "UML\n"); return NULL; } @@ -64,34 +31,34 @@ static void *not_configged_init(char *str, int device, struct chan_opts *opts) static int not_configged_open(int input, int output, int primary, void *data, char **dev_out) { - my_puts("Using a channel type which is configured out of " + printk("Using a channel type which is configured out of " "UML\n"); return -ENODEV; } static void not_configged_close(int fd, void *data) { - my_puts("Using a channel type which is configured out of " + printk("Using a channel type which is configured out of " "UML\n"); } static int not_configged_read(int fd, char *c_out, void *data) { - my_puts("Using a channel type which is configured out of " + printk("Using a channel type which is configured out of " "UML\n"); return -EIO; } static int not_configged_write(int fd, const char *buf, int len, void *data) { - my_puts("Using a channel type which is configured out of " + printk("Using a channel type which is configured out of " "UML\n"); return -EIO; } static int not_configged_console_write(int fd, const char *buf, int len) { - my_puts("Using a channel type which is configured out of " + printk("Using a channel type which is configured out of " "UML\n"); return -EIO; } @@ -99,14 +66,14 @@ static int not_configged_console_write(int fd, const char *buf, int len) static int not_configged_window_size(int fd, void *data, unsigned short *rows, unsigned short *cols) { - my_puts("Using a channel type which is configured out of " + printk("Using a channel type which is configured out of " "UML\n"); return -ENODEV; } static void not_configged_free(void *data) { - my_puts("Using a channel type which is configured out of " + printk("Using a channel type which is configured out of " "UML\n"); } @@ -534,7 +501,7 @@ static const struct chan_type chan_table[] = { }; static struct chan *parse_chan(struct line *line, char *str, int device, - const struct chan_opts *opts) + const struct chan_opts *opts, char **error_out) { const struct chan_type *entry; const struct chan_ops *ops; @@ -553,19 +520,21 @@ static struct chan *parse_chan(struct line *line, char *str, int device, } } if(ops == NULL){ - my_printf("parse_chan couldn't parse \"%s\"\n", - str); + *error_out = "No match for configured backends"; return NULL; } - if(ops->init == NULL) - return NULL; + data = (*ops->init)(str, device, opts); - if(data == NULL) + if(data == NULL){ + *error_out = "Configuration failed"; return NULL; + } chan = kmalloc(sizeof(*chan), GFP_ATOMIC); - if(chan == NULL) + if(chan == NULL){ + *error_out = "Memory allocation failed"; return NULL; + } *chan = ((struct chan) { .list = LIST_HEAD_INIT(chan->list), .free_list = LIST_HEAD_INIT(chan->free_list), @@ -582,7 +551,7 @@ static struct chan *parse_chan(struct line *line, char *str, int device, } int parse_chan_pair(char *str, struct line *line, int device, - const struct chan_opts *opts) + const struct chan_opts *opts, char **error_out) { struct list_head *chans = &line->chan_list; struct chan *new, *chan; @@ -599,14 +568,14 @@ int parse_chan_pair(char *str, struct line *line, int device, in = str; *out = '\0'; out++; - new = parse_chan(line, in, device, opts); + new = parse_chan(line, in, device, opts, error_out); if(new == NULL) return -1; new->input = 1; list_add(&new->list, chans); - new = parse_chan(line, out, device, opts); + new = parse_chan(line, out, device, opts, error_out); if(new == NULL) return -1; @@ -614,7 +583,7 @@ int parse_chan_pair(char *str, struct line *line, int device, new->output = 1; } else { - new = parse_chan(line, str, device, opts); + new = parse_chan(line, str, device, opts, error_out); if(new == NULL) return -1; diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c index 799fca3644e9..e620ed46ed3f 100644 --- a/arch/um/drivers/line.c +++ b/arch/um/drivers/line.c @@ -549,14 +549,16 @@ void close_lines(struct line *lines, int nlines) close_chan(&lines[i].chan_list, 0); } -static void setup_one_line(struct line *lines, int n, char *init, int init_prio) +static int setup_one_line(struct line *lines, int n, char *init, int init_prio, + char **error_out) { struct line *line = &lines[n]; + int err = -EINVAL; spin_lock(&line->count_lock); if(line->tty != NULL){ - printk("line_setup - device %d is open\n", n); + *error_out = "Device is already open"; goto out; } @@ -569,18 +571,22 @@ static void setup_one_line(struct line *lines, int n, char *init, int init_prio) line->valid = 1; } } + err = 0; out: spin_unlock(&line->count_lock); + return err; } /* Common setup code for both startup command line and mconsole initialization. * @lines contains the array (of size @num) to modify; * @init is the setup string; + * @error_out is an error string in the case of failure; */ -int line_setup(struct line *lines, unsigned int num, char *init) +int line_setup(struct line *lines, unsigned int num, char *init, + char **error_out) { - int i, n; + int i, n, err; char *end; if(*init == '=') { @@ -591,52 +597,56 @@ int line_setup(struct line *lines, unsigned int num, char *init) else { n = simple_strtoul(init, &end, 0); if(*end != '='){ - printk(KERN_ERR "line_setup failed to parse \"%s\"\n", - init); - return 0; + *error_out = "Couldn't parse device number"; + return -EINVAL; } init = end; } init++; if (n >= (signed int) num) { - printk("line_setup - %d out of range ((0 ... %d) allowed)\n", - n, num - 1); - return 0; + *error_out = "Device number out of range"; + return -EINVAL; + } + else if (n >= 0){ + err = setup_one_line(lines, n, init, INIT_ONE, error_out); + if(err) + return err; } - else if (n >= 0) - setup_one_line(lines, n, init, INIT_ONE); else { - for(i = 0; i < num; i++) - setup_one_line(lines, i, init, INIT_ALL); + for(i = 0; i < num; i++){ + err = setup_one_line(lines, i, init, INIT_ALL, + error_out); + if(err) + return err; + } } return n == -1 ? num : n; } int line_config(struct line *lines, unsigned int num, char *str, - const struct chan_opts *opts) + const struct chan_opts *opts, char **error_out) { struct line *line; char *new; int n; if(*str == '='){ - printk("line_config - can't configure all devices from " - "mconsole\n"); - return 1; + *error_out = "Can't configure all devices from mconsole"; + return -EINVAL; } new = kstrdup(str, GFP_KERNEL); if(new == NULL){ - printk("line_config - kstrdup failed\n"); - return 1; + *error_out = "Failed to allocate memory"; + return -ENOMEM; } - n = line_setup(lines, num, new); + n = line_setup(lines, num, new, error_out); if(n < 0) - return 1; + return n; line = &lines[n]; - return parse_chan_pair(line->init_str, line, n, opts); + return parse_chan_pair(line->init_str, line, n, opts, error_out); } int line_get_config(char *name, struct line *lines, unsigned int num, char *str, @@ -685,13 +695,13 @@ int line_id(char **str, int *start_out, int *end_out) return n; } -int line_remove(struct line *lines, unsigned int num, int n) +int line_remove(struct line *lines, unsigned int num, int n, char **error_out) { int err; char config[sizeof("conxxxx=none\0")]; sprintf(config, "%d=none", n); - err = line_setup(lines, num, config); + err = line_setup(lines, num, config, error_out); if(err >= 0) err = 0; return err; @@ -740,6 +750,7 @@ static LIST_HEAD(winch_handlers); void lines_init(struct line *lines, int nlines, struct chan_opts *opts) { struct line *line; + char *error; int i; for(i = 0; i < nlines; i++){ @@ -754,8 +765,9 @@ void lines_init(struct line *lines, int nlines, struct chan_opts *opts) if(line->init_str == NULL) printk("lines_init - kstrdup returned NULL\n"); - if(parse_chan_pair(line->init_str, line, i, opts)){ - printk("parse_chan_pair failed for device %d\n", i); + if(parse_chan_pair(line->init_str, line, i, opts, &error)){ + printk("parse_chan_pair failed for device %d : %s\n", + i, error); line->valid = 0; } } diff --git a/arch/um/drivers/mconsole_kern.c b/arch/um/drivers/mconsole_kern.c index 96f0189327af..832d5c766ca8 100644 --- a/arch/um/drivers/mconsole_kern.c +++ b/arch/um/drivers/mconsole_kern.c @@ -371,14 +371,16 @@ static unsigned long long unplugged_pages_count = 0; static struct list_head unplugged_pages = LIST_HEAD_INIT(unplugged_pages); static int unplug_index = UNPLUGGED_PER_PAGE; -static int mem_config(char *str) +static int mem_config(char *str, char **error_out) { unsigned long long diff; int err = -EINVAL, i, add; char *ret; - if(str[0] != '=') + if(str[0] != '='){ + *error_out = "Expected '=' after 'mem'"; goto out; + } str++; if(str[0] == '-') @@ -386,12 +388,17 @@ static int mem_config(char *str) else if(str[0] == '+'){ add = 1; } - else goto out; + else { + *error_out = "Expected increment to start with '-' or '+'"; + goto out; + } str++; diff = memparse(str, &ret); - if(*ret != '\0') + if(*ret != '\0'){ + *error_out = "Failed to parse memory increment"; goto out; + } diff /= PAGE_SIZE; @@ -435,11 +442,14 @@ static int mem_config(char *str) unplugged = list_entry(entry, struct unplugged_pages, list); - unplugged->pages[unplug_index++] = addr; err = os_drop_memory(addr, PAGE_SIZE); - if(err) + if(err){ printk("Failed to release memory - " "errno = %d\n", err); + *error_out = "Failed to release memory"; + goto out; + } + unplugged->pages[unplug_index++] = addr; } unplugged_pages_count++; @@ -470,8 +480,9 @@ static int mem_id(char **str, int *start_out, int *end_out) return 0; } -static int mem_remove(int n) +static int mem_remove(int n, char **error_out) { + *error_out = "Memory doesn't support the remove operation"; return -EBUSY; } @@ -542,7 +553,7 @@ static void mconsole_get_config(int (*get_config)(char *, char *, int, void mconsole_config(struct mc_request *req) { struct mc_device *dev; - char *ptr = req->request.data, *name; + char *ptr = req->request.data, *name, *error_string = ""; int err; ptr += strlen("config"); @@ -559,8 +570,8 @@ void mconsole_config(struct mc_request *req) ptr++; if(*ptr == '='){ - err = (*dev->config)(name); - mconsole_reply(req, "", err, 0); + err = (*dev->config)(name, &error_string); + mconsole_reply(req, error_string, err, 0); } else mconsole_get_config(dev->get_config, req, name); } @@ -595,13 +606,16 @@ void mconsole_remove(struct mc_request *req) goto out; } - err = (*dev->remove)(n); + err_msg = NULL; + err = (*dev->remove)(n, &err_msg); switch(err){ case -ENODEV: - err_msg = "Device doesn't exist"; + if(err_msg == NULL) + err_msg = "Device doesn't exist"; break; case -EBUSY: - err_msg = "Device is currently open"; + if(err_msg == NULL) + err_msg = "Device is currently open"; break; default: break; diff --git a/arch/um/drivers/net_kern.c b/arch/um/drivers/net_kern.c index afe3d427ddfa..07e839e387db 100644 --- a/arch/um/drivers/net_kern.c +++ b/arch/um/drivers/net_kern.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2001 Lennert Buytenhek (buytenh@gnu.org) and + * Copyright (C) 2001 Lennert Buytenhek (buytenh@gnu.org) and * James Leu (jleu@mindspring.net). * Copyright (C) 2001 by various other people who didn't put their name here. * Licensed under the GPL. @@ -91,8 +91,8 @@ irqreturn_t uml_net_interrupt(int irq, void *dev_id) spin_lock(&lp->lock); while((err = uml_net_rx(dev)) > 0) ; if(err < 0) { - printk(KERN_ERR - "Device '%s' read returned %d, shutting it down\n", + printk(KERN_ERR + "Device '%s' read returned %d, shutting it down\n", dev->name, err); /* dev_close can't be called in interrupt context, and takes * again lp->lock. @@ -159,7 +159,7 @@ out: static int uml_net_close(struct net_device *dev) { struct uml_net_private *lp = dev->priv; - + netif_stop_queue(dev); free_irq(dev->irq, dev); @@ -194,7 +194,7 @@ static int uml_net_start_xmit(struct sk_buff *skb, struct net_device *dev) /* this is normally done in the interrupt when tx finishes */ netif_wake_queue(dev); - } + } else if(len == 0){ netif_start_queue(dev); lp->stats.tx_dropped++; @@ -333,7 +333,7 @@ static int eth_configure(int n, void *init, char *mac, struct uml_net_private *lp; int save, err, size; - size = transport->private_size + sizeof(struct uml_net_private) + + size = transport->private_size + sizeof(struct uml_net_private) + sizeof(((struct uml_net_private *) 0)->user); device = kzalloc(sizeof(*device), GFP_KERNEL); @@ -438,7 +438,7 @@ static int eth_configure(int n, void *init, char *mac, lp->tl.function = uml_net_user_timer_expire; memcpy(lp->mac, device->mac, sizeof(lp->mac)); - if (transport->user->init) + if (transport->user->init) (*transport->user->init)(&lp->user, dev); set_ether_mac(dev, device->mac); @@ -463,35 +463,33 @@ static struct uml_net *find_device(int n) return(device); } -static int eth_parse(char *str, int *index_out, char **str_out) +static int eth_parse(char *str, int *index_out, char **str_out, + char **error_out) { char *end; - int n; + int n, err = -EINVAL;; n = simple_strtoul(str, &end, 0); if(end == str){ - printk(KERN_ERR "eth_setup: Failed to parse '%s'\n", str); - return(1); - } - if(n < 0){ - printk(KERN_ERR "eth_setup: device %d is negative\n", n); - return(1); + *error_out = "Bad device number"; + return err; } + str = end; if(*str != '='){ - printk(KERN_ERR - "eth_setup: expected '=' after device number\n"); - return(1); + *error_out = "Expected '=' after device number"; + return err; } + str++; if(find_device(n)){ - printk(KERN_ERR "eth_setup: Device %d already configured\n", - n); - return(1); + *error_out = "Device already configured"; + return err; } - if(index_out) *index_out = n; + + *index_out = n; *str_out = str; - return(0); + return 0; } struct eth_init { @@ -581,11 +579,15 @@ static int eth_setup_common(char *str, int index) static int eth_setup(char *str) { struct eth_init *new; + char *error; int n, err; - err = eth_parse(str, &n, &str); - if(err) + err = eth_parse(str, &n, &str, &error); + if(err){ + printk(KERN_ERR "eth_setup - Couldn't parse '%s' : %s\n", + str, error); return 1; + } new = alloc_bootmem(sizeof(*new)); if (new == NULL){ @@ -619,26 +621,30 @@ static int eth_init(void) if(eth_setup_common(eth->init, eth->index)) list_del(ð->list); } - + return(1); } __initcall(eth_init); #endif -static int net_config(char *str) +static int net_config(char *str, char **error_out) { int n, err; - err = eth_parse(str, &n, &str); - if(err) return(err); + err = eth_parse(str, &n, &str, error_out); + if(err) + return err; + /* This string is broken up and the pieces used by the underlying + * driver. So, it is freed only if eth_setup_common fails. + */ str = kstrdup(str, GFP_KERNEL); if(str == NULL){ - printk(KERN_ERR "net_config failed to strdup string\n"); - return(-1); + *error_out = "net_config failed to strdup string"; + return -ENOMEM; } err = !eth_setup_common(str, n); - if(err) + if(err) kfree(str); return(err); } @@ -658,7 +664,7 @@ static int net_id(char **str, int *start_out, int *end_out) return n; } -static int net_remove(int n) +static int net_remove(int n, char **error_out) { struct uml_net *device; struct net_device *dev; @@ -727,7 +733,7 @@ struct notifier_block uml_inetaddr_notifier = { static int uml_net_init(void) { struct list_head *ele; - struct uml_net_private *lp; + struct uml_net_private *lp; struct in_device *ip; struct in_ifaddr *in; @@ -747,7 +753,7 @@ static int uml_net_init(void) uml_inetaddr_event(NULL, NETDEV_UP, in); in = in->ifa_next; } - } + } return(0); } @@ -783,8 +789,8 @@ struct sk_buff *ether_adjust_skb(struct sk_buff *skb, int extra) return(skb); } -void iter_addresses(void *d, void (*cb)(unsigned char *, unsigned char *, - void *), +void iter_addresses(void *d, void (*cb)(unsigned char *, unsigned char *, + void *), void *arg) { struct net_device *dev = d; @@ -809,11 +815,11 @@ int dev_netmask(void *d, void *m) struct in_ifaddr *in; __be32 *mask_out = m; - if(ip == NULL) + if(ip == NULL) return(1); in = ip->ifa_list; - if(in == NULL) + if(in == NULL) return(1); *mask_out = in->ifa_mask; @@ -835,7 +841,7 @@ void free_output_buffer(void *buffer) free_pages((unsigned long) buffer, 0); } -int tap_setup_common(char *str, char *type, char **dev_name, char **mac_out, +int tap_setup_common(char *str, char *type, char **dev_name, char **mac_out, char **gate_addr) { char *remain; @@ -854,14 +860,3 @@ unsigned short eth_protocol(struct sk_buff *skb) { return(eth_type_trans(skb, skb->dev)); } - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/drivers/ssl.c b/arch/um/drivers/ssl.c index ed9c59082d0d..1e82430b8444 100644 --- a/arch/um/drivers/ssl.c +++ b/arch/um/drivers/ssl.c @@ -46,9 +46,9 @@ static struct chan_opts opts = { .in_kernel = 1, }; -static int ssl_config(char *str); +static int ssl_config(char *str, char **error_out); static int ssl_get_config(char *dev, char *str, int size, char **error_out); -static int ssl_remove(int n); +static int ssl_remove(int n, char **error_out); static struct line_driver driver = { .name = "UML serial line", @@ -80,9 +80,10 @@ static struct line serial_lines[NR_PORTS] = static struct lines lines = LINES_INIT(NR_PORTS); -static int ssl_config(char *str) +static int ssl_config(char *str, char **error_out) { - return line_config(serial_lines, ARRAY_SIZE(serial_lines), str, &opts); + return line_config(serial_lines, ARRAY_SIZE(serial_lines), str, &opts, + error_out); } static int ssl_get_config(char *dev, char *str, int size, char **error_out) @@ -91,9 +92,10 @@ static int ssl_get_config(char *dev, char *str, int size, char **error_out) size, error_out); } -static int ssl_remove(int n) +static int ssl_remove(int n, char **error_out) { - return line_remove(serial_lines, ARRAY_SIZE(serial_lines), n); + return line_remove(serial_lines, ARRAY_SIZE(serial_lines), n, + error_out); } static int ssl_open(struct tty_struct *tty, struct file *filp) @@ -212,7 +214,15 @@ __uml_exitcall(ssl_exit); static int ssl_chan_setup(char *str) { - return line_setup(serial_lines, ARRAY_SIZE(serial_lines), str); + char *error; + int ret; + + ret = line_setup(serial_lines, ARRAY_SIZE(serial_lines), str, &error); + if(ret < 0) + printk(KERN_ERR "Failed to set up serial line with " + "configuration string \"%s\" : %s\n", str, error); + + return 1; } __setup("ssl", ssl_chan_setup); diff --git a/arch/um/drivers/stdio_console.c b/arch/um/drivers/stdio_console.c index 9b2dd0b8a43b..3cbfe3a88607 100644 --- a/arch/um/drivers/stdio_console.c +++ b/arch/um/drivers/stdio_console.c @@ -52,9 +52,9 @@ static struct chan_opts opts = { .in_kernel = 1, }; -static int con_config(char *str); +static int con_config(char *str, char **error_out); static int con_get_config(char *dev, char *str, int size, char **error_out); -static int con_remove(int n); +static int con_remove(int n, char **con_remove); static struct line_driver driver = { .name = "UML console", @@ -87,9 +87,9 @@ static struct line vts[MAX_TTYS] = { LINE_INIT(CONFIG_CON_ZERO_CHAN, &driver), [ 1 ... MAX_TTYS - 1 ] = LINE_INIT(CONFIG_CON_CHAN, &driver) }; -static int con_config(char *str) +static int con_config(char *str, char **error_out) { - return line_config(vts, ARRAY_SIZE(vts), str, &opts); + return line_config(vts, ARRAY_SIZE(vts), str, &opts, error_out); } static int con_get_config(char *dev, char *str, int size, char **error_out) @@ -97,9 +97,9 @@ static int con_get_config(char *dev, char *str, int size, char **error_out) return line_get_config(dev, vts, ARRAY_SIZE(vts), str, size, error_out); } -static int con_remove(int n) +static int con_remove(int n, char **error_out) { - return line_remove(vts, ARRAY_SIZE(vts), n); + return line_remove(vts, ARRAY_SIZE(vts), n, error_out); } static int con_open(struct tty_struct *tty, struct file *filp) @@ -192,7 +192,15 @@ __uml_exitcall(console_exit); static int console_chan_setup(char *str) { - return line_setup(vts, ARRAY_SIZE(vts), str); + char *error; + int ret; + + ret = line_setup(vts, ARRAY_SIZE(vts), str, &error); + if(ret < 0) + printk(KERN_ERR "Failed to set up console with " + "configuration string \"%s\" : %s\n", str, error); + + return 1; } __setup("con", console_chan_setup); __channel_help(console_chan_setup, "con"); diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c index 49c047b75cc5..f4db97efc014 100644 --- a/arch/um/drivers/ubd_kern.c +++ b/arch/um/drivers/ubd_kern.c @@ -286,7 +286,7 @@ static int parse_unit(char **ptr) * otherwise, the str pointer is used (and owned) inside ubd_devs array, so it * should not be freed on exit. */ -static int ubd_setup_common(char *str, int *index_out) +static int ubd_setup_common(char *str, int *index_out, char **error_out) { struct ubd *ubd_dev; struct openflags flags = global_openflags; @@ -302,56 +302,54 @@ static int ubd_setup_common(char *str, int *index_out) str++; if(!strcmp(str, "sync")){ global_openflags = of_sync(global_openflags); - return(0); + return 0; } major = simple_strtoul(str, &end, 0); if((*end != '\0') || (end == str)){ - printk(KERN_ERR - "ubd_setup : didn't parse major number\n"); - return(1); + *error_out = "Didn't parse major number"; + return -EINVAL; } - err = 1; - mutex_lock(&ubd_lock); - if(fake_major != MAJOR_NR){ - printk(KERN_ERR "Can't assign a fake major twice\n"); - goto out1; - } + err = -EINVAL; + mutex_lock(&ubd_lock); + if(fake_major != MAJOR_NR){ + *error_out = "Can't assign a fake major twice"; + goto out1; + } - fake_major = major; + fake_major = major; printk(KERN_INFO "Setting extra ubd major number to %d\n", major); - err = 0; - out1: - mutex_unlock(&ubd_lock); - return(err); + err = 0; + out1: + mutex_unlock(&ubd_lock); + return err; } n = parse_unit(&str); if(n < 0){ - printk(KERN_ERR "ubd_setup : couldn't parse unit number " - "'%s'\n", str); - return(1); + *error_out = "Couldn't parse device number"; + return -EINVAL; } if(n >= MAX_DEV){ - printk(KERN_ERR "ubd_setup : index %d out of range " - "(%d devices, from 0 to %d)\n", n, MAX_DEV, MAX_DEV - 1); - return(1); + *error_out = "Device number out of range"; + return 1; } - err = 1; + err = -EBUSY; mutex_lock(&ubd_lock); ubd_dev = &ubd_devs[n]; if(ubd_dev->file != NULL){ - printk(KERN_ERR "ubd_setup : device already configured\n"); + *error_out = "Device is already configured"; goto out; } if (index_out) *index_out = n; + err = -EINVAL; for (i = 0; i < sizeof("rscd="); i++) { switch (*str) { case 'r': @@ -370,47 +368,54 @@ static int ubd_setup_common(char *str, int *index_out) str++; goto break_loop; default: - printk(KERN_ERR "ubd_setup : Expected '=' or flag letter (r, s, c, or d)\n"); + *error_out = "Expected '=' or flag letter " + "(r, s, c, or d)"; goto out; } str++; } - if (*str == '=') - printk(KERN_ERR "ubd_setup : Too many flags specified\n"); - else - printk(KERN_ERR "ubd_setup : Expected '='\n"); + if (*str == '=') + *error_out = "Too many flags specified"; + else + *error_out = "Missing '='"; goto out; break_loop: - err = 0; backing_file = strchr(str, ','); - if (!backing_file) { + if (backing_file == NULL) backing_file = strchr(str, ':'); - } - if(backing_file){ - if(ubd_dev->no_cow) - printk(KERN_ERR "Can't specify both 'd' and a " - "cow file\n"); + if(backing_file != NULL){ + if(ubd_dev->no_cow){ + *error_out = "Can't specify both 'd' and a cow file"; + goto out; + } else { *backing_file = '\0'; backing_file++; } } + err = 0; ubd_dev->file = str; ubd_dev->cow.file = backing_file; ubd_dev->boot_openflags = flags; out: mutex_unlock(&ubd_lock); - return(err); + return err; } static int ubd_setup(char *str) { - ubd_setup_common(str, NULL); - return(1); + char *error; + int err; + + err = ubd_setup_common(str, NULL, &error); + if(err) + printk(KERN_ERR "Failed to initialize device with \"%s\" : " + "%s\n", str, error); + return 1; } __setup("ubd", ubd_setup); @@ -422,7 +427,7 @@ __uml_help(ubd_setup, " use either a ':' or a ',': the first one allows writing things like;\n" " ubd0=~/Uml/root_cow:~/Uml/root_backing_file\n" " while with a ',' the shell would not expand the 2nd '~'.\n" -" When using only one filename, UML will detect whether to thread it like\n" +" When using only one filename, UML will detect whether to treat it like\n" " a COW file or a backing file. To override this detection, add the 'd'\n" " flag:\n" " ubd0d=BackingFile\n" @@ -668,18 +673,19 @@ static int ubd_disk_register(int major, u64 size, int unit, #define ROUND_BLOCK(n) ((n + ((1 << 9) - 1)) & (-1 << 9)) -static int ubd_add(int n) +static int ubd_add(int n, char **error_out) { struct ubd *ubd_dev = &ubd_devs[n]; - int err; + int err = 0; - err = -ENODEV; if(ubd_dev->file == NULL) goto out; err = ubd_file_size(ubd_dev, &ubd_dev->size); - if(err < 0) + if(err < 0){ + *error_out = "Couldn't determine size of device's file"; goto out; + } ubd_dev->size = ROUND_BLOCK(ubd_dev->size); @@ -701,28 +707,31 @@ out: return err; } -static int ubd_config(char *str) +static int ubd_config(char *str, char **error_out) { int n, ret; + /* This string is possibly broken up and stored, so it's only + * freed if ubd_setup_common fails, or if only general options + * were set. + */ str = kstrdup(str, GFP_KERNEL); if (str == NULL) { - printk(KERN_ERR "ubd_config failed to strdup string\n"); - ret = 1; - goto out; + *error_out = "Failed to allocate memory"; + return -ENOMEM; } - ret = ubd_setup_common(str, &n); - if (ret) { - ret = -1; + + ret = ubd_setup_common(str, &n, error_out); + if (ret) goto err_free; - } + if (n == -1) { ret = 0; goto err_free; } mutex_lock(&ubd_lock); - ret = ubd_add(n); + ret = ubd_add(n, error_out); if (ret) ubd_devs[n].file = NULL; mutex_unlock(&ubd_lock); @@ -777,7 +786,7 @@ static int ubd_id(char **str, int *start_out, int *end_out) return n; } -static int ubd_remove(int n) +static int ubd_remove(int n, char **error_out) { struct ubd *ubd_dev; int err = -ENODEV; @@ -815,7 +824,9 @@ out: return err; } -/* All these are called by mconsole in process context and without ubd-specific locks. */ +/* All these are called by mconsole in process context and without + * ubd-specific locks. + */ static struct mc_device ubd_mc = { .name = "ubd", .config = ubd_config, @@ -851,7 +862,8 @@ static struct platform_driver ubd_driver = { static int __init ubd_init(void) { - int i; + char *error; + int i, err; if (register_blkdev(MAJOR_NR, "ubd")) return -1; @@ -870,8 +882,12 @@ static int __init ubd_init(void) return -1; } platform_driver_register(&ubd_driver); - for (i = 0; i < MAX_DEV; i++) - ubd_add(i); + for (i = 0; i < MAX_DEV; i++){ + err = ubd_add(i, &error); + if(err) + printk(KERN_ERR "Failed to initialize ubd device %d :" + "%s\n", i, error); + } return 0; } diff --git a/arch/um/include/chan_kern.h b/arch/um/include/chan_kern.h index 9003a343e148..2d9aa7ef4c27 100644 --- a/arch/um/include/chan_kern.h +++ b/arch/um/include/chan_kern.h @@ -30,7 +30,7 @@ struct chan { extern void chan_interrupt(struct list_head *chans, struct delayed_work *task, struct tty_struct *tty, int irq); extern int parse_chan_pair(char *str, struct line *line, int device, - const struct chan_opts *opts); + const struct chan_opts *opts, char **error_out); extern int open_chan(struct list_head *chans); extern int write_chan(struct list_head *chans, const char *buf, int len, int write_irq); diff --git a/arch/um/include/line.h b/arch/um/include/line.h index b79643eeee08..a2486b4cc9fe 100644 --- a/arch/um/include/line.h +++ b/arch/um/include/line.h @@ -76,7 +76,7 @@ struct lines { extern void line_close(struct tty_struct *tty, struct file * filp); extern int line_open(struct line *lines, struct tty_struct *tty); extern int line_setup(struct line *lines, unsigned int sizeof_lines, - char *init); + char *init, char **error_out); extern int line_write(struct tty_struct *tty, const unsigned char *buf, int len); extern void line_put_char(struct tty_struct *tty, unsigned char ch); @@ -102,9 +102,11 @@ extern void lines_init(struct line *lines, int nlines, struct chan_opts *opts); extern void close_lines(struct line *lines, int nlines); extern int line_config(struct line *lines, unsigned int sizeof_lines, - char *str, const struct chan_opts *opts); + char *str, const struct chan_opts *opts, + char **error_out); extern int line_id(char **str, int *start_out, int *end_out); -extern int line_remove(struct line *lines, unsigned int sizeof_lines, int n); +extern int line_remove(struct line *lines, unsigned int sizeof_lines, int n, + char **error_out); extern int line_get_config(char *dev, struct line *lines, unsigned int sizeof_lines, char *str, int size, char **error_out); diff --git a/arch/um/include/mconsole_kern.h b/arch/um/include/mconsole_kern.h index 1ea6d928e1cd..73030e52b2ce 100644 --- a/arch/um/include/mconsole_kern.h +++ b/arch/um/include/mconsole_kern.h @@ -18,10 +18,10 @@ struct mconsole_entry { struct mc_device { struct list_head list; char *name; - int (*config)(char *); + int (*config)(char *, char **); int (*get_config)(char *, char *, int, char **); int (*id)(char **, int *, int *); - int (*remove)(int); + int (*remove)(int, char **); }; #define CONFIG_CHUNK(str, size, current, chunk, end) \ @@ -50,14 +50,3 @@ static inline void mconsole_register_dev(struct mc_device *new) #endif #endif - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/kernel/tt/gdb.c b/arch/um/kernel/tt/gdb.c index 786e4edd86c5..8eba8f7dca68 100644 --- a/arch/um/kernel/tt/gdb.c +++ b/arch/um/kernel/tt/gdb.c @@ -139,7 +139,7 @@ static void config_gdb_cb(void *arg) init_proxy(debugger_pid, 0, 0); } -int gdb_config(char *str) +int gdb_config(char *str, char **error_out) { struct gdb_data data; @@ -154,7 +154,7 @@ void remove_gdb_cb(void *unused) exit_debugger_cb(NULL); } -int gdb_remove(int unused) +int gdb_remove(int unused, char **error_out) { initial_thread_cb(remove_gdb_cb, NULL); return 0; diff --git a/arch/um/kernel/tt/gdb_kern.c b/arch/um/kernel/tt/gdb_kern.c index 68e1bf63cd0a..a1af96ef9ee2 100644 --- a/arch/um/kernel/tt/gdb_kern.c +++ b/arch/um/kernel/tt/gdb_kern.c @@ -8,8 +8,8 @@ #ifdef CONFIG_MCONSOLE -extern int gdb_config(char *str); -extern int gdb_remove(int n); +extern int gdb_config(char *str, char **error_out); +extern int gdb_remove(int n, char **error_out); static struct mc_device gdb_mc = { .name = "gdb", -- cgit v1.2.3 From 894be2a485b75bce9a4d45d3e431aafd4c89f1ea Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Sat, 10 Feb 2007 01:43:54 -0800 Subject: [PATCH] uml: console whitespace and comment tidying Some comment and whitespace cleanups in the console and mconsole code. Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/drivers/stdio_console.c | 2 -- arch/um/include/mconsole_kern.h | 2 +- 2 files changed, 1 insertion(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/um/drivers/stdio_console.c b/arch/um/drivers/stdio_console.c index 3cbfe3a88607..0b1bca498049 100644 --- a/arch/um/drivers/stdio_console.c +++ b/arch/um/drivers/stdio_console.c @@ -30,8 +30,6 @@ #define MAX_TTYS (16) -/* ----------------------------------------------------------------------------- */ - /* Referenced only by tty_driver below - presumably it's locked correctly * by the tty driver. */ diff --git a/arch/um/include/mconsole_kern.h b/arch/um/include/mconsole_kern.h index 73030e52b2ce..d2fe07e78958 100644 --- a/arch/um/include/mconsole_kern.h +++ b/arch/um/include/mconsole_kern.h @@ -20,7 +20,7 @@ struct mc_device { char *name; int (*config)(char *, char **); int (*get_config)(char *, char *, int, char **); - int (*id)(char **, int *, int *); + int (*id)(char **, int *, int *); int (*remove)(int, char **); }; -- cgit v1.2.3 From 190c3e456325942a17785332fe15b68eeb3775ca Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Sat, 10 Feb 2007 01:43:55 -0800 Subject: [PATCH] uml: lock the irqs_to_free list Fix (i.e. add some) the locking around the irqs_to_free list. Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/drivers/chan_kern.c | 21 ++++++++++++++++++--- 1 file changed, 18 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/um/drivers/chan_kern.c b/arch/um/drivers/chan_kern.c index 4e7e3cfa21f9..bce9b3427b09 100644 --- a/arch/um/drivers/chan_kern.c +++ b/arch/um/drivers/chan_kern.c @@ -222,15 +222,28 @@ void enable_chan(struct line *line) } } +/* Items are added in IRQ context, when free_irq can't be called, and + * removed in process context, when it can. + * This handles interrupt sources which disappear, and which need to + * be permanently disabled. This is discovered in IRQ context, but + * the freeing of the IRQ must be done later. + */ +static DEFINE_SPINLOCK(irqs_to_free_lock); static LIST_HEAD(irqs_to_free); void free_irqs(void) { struct chan *chan; + LIST_HEAD(list); + struct list_head *ele; + + spin_lock_irq(&irqs_to_free_lock); + list_splice_init(&irqs_to_free, &list); + INIT_LIST_HEAD(&irqs_to_free); + spin_unlock_irq(&irqs_to_free_lock); - while(!list_empty(&irqs_to_free)){ - chan = list_entry(irqs_to_free.next, struct chan, free_list); - list_del(&chan->free_list); + list_for_each(ele, &list){ + chan = list_entry(ele, struct chan, free_list); if(chan->input) free_irq(chan->line->driver->read_irq, chan); @@ -246,7 +259,9 @@ static void close_one_chan(struct chan *chan, int delay_free_irq) return; if(delay_free_irq){ + spin_lock_irq(&irqs_to_free_lock); list_add(&chan->free_list, &irqs_to_free); + spin_unlock_irq(&irqs_to_free_lock); } else { if(chan->input) -- cgit v1.2.3 From d3b7f69de2b92e4b6057d81e6c52f629a8663368 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Sat, 10 Feb 2007 01:43:56 -0800 Subject: [PATCH] uml: add locking to network transport registration The registration of host network transports needed some locking. The transport list itself is locked, but calls to the registration routines are not. This is compensated for by checking that a transport structure is not yet on any list. I also took the opportunity to const all fields in the transport structure except the list, which obviously can be modified. Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/drivers/net_kern.c | 9 +++++---- arch/um/include/net_kern.h | 8 ++++---- 2 files changed, 9 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/um/drivers/net_kern.c b/arch/um/drivers/net_kern.c index 07e839e387db..b10154cc46b6 100644 --- a/arch/um/drivers/net_kern.c +++ b/arch/um/drivers/net_kern.c @@ -498,10 +498,8 @@ struct eth_init { int index; }; -/* Filled in at boot time. Will need locking if the transports become - * modular. - */ -struct list_head transports = LIST_HEAD_INIT(transports); +static DEFINE_SPINLOCK(transports_lock); +static LIST_HEAD(transports); /* Filled in during early boot */ struct list_head eth_cmd_line = LIST_HEAD_INIT(eth_cmd_line); @@ -540,7 +538,10 @@ void register_transport(struct transport *new) char *mac = NULL; int match; + spin_lock(&transports_lock); + BUG_ON(!list_empty(&new->list)); list_add(&new->list, &transports); + spin_unlock(&transports_lock); list_for_each_safe(ele, next, ð_cmd_line){ eth = list_entry(ele, struct eth_init, list); diff --git a/arch/um/include/net_kern.h b/arch/um/include/net_kern.h index 218f8b47fdcd..92f76d82a6ef 100644 --- a/arch/um/include/net_kern.h +++ b/arch/um/include/net_kern.h @@ -52,12 +52,12 @@ struct net_kern_info { struct transport { struct list_head list; - char *name; - int (*setup)(char *, char **, void *); + const char *name; + int (* const setup)(char *, char **, void *); const struct net_user_info *user; const struct net_kern_info *kern; - int private_size; - int setup_size; + const int private_size; + const int setup_size; }; extern struct net_device *ether_init(int); -- cgit v1.2.3 From 4ea21cd9173a0ffa75dc74cc46d08dfc45654f29 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Sat, 10 Feb 2007 01:43:56 -0800 Subject: [PATCH] uml: network driver whitespace and style fixes Some whitespace and coding style cleanups in the network driver code. Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Acked-by: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/drivers/net_kern.c | 29 +++++++++++++++-------------- arch/um/include/net_kern.h | 6 +++--- 2 files changed, 18 insertions(+), 17 deletions(-) (limited to 'arch') diff --git a/arch/um/drivers/net_kern.c b/arch/um/drivers/net_kern.c index b10154cc46b6..eede892a4f38 100644 --- a/arch/um/drivers/net_kern.c +++ b/arch/um/drivers/net_kern.c @@ -108,7 +108,7 @@ irqreturn_t uml_net_interrupt(int irq, void *dev_id) out: spin_unlock(&lp->lock); - return(IRQ_HANDLED); + return IRQ_HANDLED; } static int uml_net_open(struct net_device *dev) @@ -239,7 +239,7 @@ static int uml_net_set_mac(struct net_device *dev, void *addr) set_ether_mac(dev, hwaddr->sa_data); spin_unlock_irq(&lp->lock); - return(0); + return 0; } static int uml_net_change_mtu(struct net_device *dev, int new_mtu) @@ -460,7 +460,7 @@ static struct uml_net *find_device(int n) device = NULL; out: spin_unlock(&devices_lock); - return(device); + return device; } static int eth_parse(char *str, int *index_out, char **str_out, @@ -511,23 +511,23 @@ static int check_transport(struct transport *transport, char *eth, int n, len = strlen(transport->name); if(strncmp(eth, transport->name, len)) - return(0); + return 0; eth += len; if(*eth == ',') eth++; else if(*eth != '\0') - return(0); + return 0; *init_out = kmalloc(transport->setup_size, GFP_KERNEL); if(*init_out == NULL) - return(1); + return 1; if(!transport->setup(eth, mac_out, *init_out)){ kfree(*init_out); *init_out = NULL; } - return(1); + return 1; } void register_transport(struct transport *new) @@ -572,9 +572,9 @@ static int eth_setup_common(char *str, int index) eth_configure(index, init, mac, transport); kfree(init); } - return(1); + return 1; } - return(0); + return 0; } static int eth_setup(char *str) @@ -678,7 +678,7 @@ static int net_remove(int n, char **error_out) dev = device->dev; lp = dev->priv; if(lp->fd > 0) - return -EBUSY; + return -EBUSY; if(lp->remove != NULL) (*lp->remove)(&lp->user); unregister_netdev(dev); platform_device_unregister(&device->pdev); @@ -693,7 +693,7 @@ static struct mc_device net_mc = { .name = "eth", .config = net_config, .get_config = NULL, - .id = net_id, + .id = net_id, .remove = net_remove, }; @@ -706,7 +706,8 @@ static int uml_inetaddr_event(struct notifier_block *this, unsigned long event, void (*proc)(unsigned char *, unsigned char *, void *); unsigned char addr_buf[4], netmask_buf[4]; - if(dev->open != uml_net_open) return(NOTIFY_DONE); + if(dev->open != uml_net_open) + return NOTIFY_DONE; lp = dev->priv; @@ -724,7 +725,7 @@ static int uml_inetaddr_event(struct notifier_block *this, unsigned long event, memcpy(netmask_buf, &ifa->ifa_mask, sizeof(netmask_buf)); (*proc)(addr_buf, netmask_buf, &lp->user); } - return(NOTIFY_DONE); + return NOTIFY_DONE; } struct notifier_block uml_inetaddr_notifier = { @@ -834,7 +835,7 @@ void *get_output_buffer(int *len_out) ret = (void *) __get_free_pages(GFP_KERNEL, 0); if(ret) *len_out = PAGE_SIZE; else *len_out = 0; - return(ret); + return ret; } void free_output_buffer(void *buffer) diff --git a/arch/um/include/net_kern.h b/arch/um/include/net_kern.h index 92f76d82a6ef..125ab42df18a 100644 --- a/arch/um/include/net_kern.h +++ b/arch/um/include/net_kern.h @@ -1,4 +1,4 @@ -/* +/* * Copyright (C) 2002 Jeff Dike (jdike@karaya.com) * Licensed under the GPL */ @@ -36,7 +36,7 @@ struct uml_net_private { void (*remove)(void *); int (*read)(int, struct sk_buff **skb, struct uml_net_private *); int (*write)(int, struct sk_buff **skb, struct uml_net_private *); - + void (*add_address)(unsigned char *, unsigned char *, void *); void (*delete_address)(unsigned char *, unsigned char *, void *); int (*set_mtu)(int mtu, void *); @@ -63,7 +63,7 @@ struct transport { extern struct net_device *ether_init(int); extern unsigned short ether_protocol(struct sk_buff *); extern struct sk_buff *ether_adjust_skb(struct sk_buff *skb, int extra); -extern int tap_setup_common(char *str, char *type, char **dev_name, +extern int tap_setup_common(char *str, char *type, char **dev_name, char **mac_out, char **gate_addr); extern void register_transport(struct transport *new); extern unsigned short eth_protocol(struct sk_buff *skb); -- cgit v1.2.3 From 42d36115d25725fb551250c8f70602a12aa8dee2 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Sat, 10 Feb 2007 01:43:57 -0800 Subject: [PATCH] uml: watchdog driver locking Replace BKL use with a spinlock. Also fix the control so that open doesn't return holding a lock. Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/drivers/harddog_kern.c | 23 +++++++++++++++-------- 1 file changed, 15 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/um/drivers/harddog_kern.c b/arch/um/drivers/harddog_kern.c index 64ff22aa077b..94bbcb5b9227 100644 --- a/arch/um/drivers/harddog_kern.c +++ b/arch/um/drivers/harddog_kern.c @@ -44,12 +44,13 @@ #include #include #include +#include #include #include "mconsole.h" MODULE_LICENSE("GPL"); -/* Locked by the BKL in harddog_open and harddog_release */ +static DEFINE_SPINLOCK(lock); static int timer_alive; static int harddog_in_fd = -1; static int harddog_out_fd = -1; @@ -62,12 +63,12 @@ extern int start_watchdog(int *in_fd_ret, int *out_fd_ret, char *sock); static int harddog_open(struct inode *inode, struct file *file) { - int err; + int err = -EBUSY; char *sock = NULL; - lock_kernel(); + spin_lock(&lock); if(timer_alive) - return -EBUSY; + goto err; #ifdef CONFIG_HARDDOG_NOWAYOUT __module_get(THIS_MODULE); #endif @@ -76,11 +77,15 @@ static int harddog_open(struct inode *inode, struct file *file) sock = mconsole_notify_socket(); #endif err = start_watchdog(&harddog_in_fd, &harddog_out_fd, sock); - if(err) return(err); + if(err) + goto err; timer_alive = 1; - unlock_kernel(); + spin_unlock(&lock); return nonseekable_open(inode, file); +err: + spin_unlock(&lock); + return err; } extern void stop_watchdog(int in_fd, int out_fd); @@ -90,14 +95,16 @@ static int harddog_release(struct inode *inode, struct file *file) /* * Shut off the timer. */ - lock_kernel(); + + spin_lock(&lock); stop_watchdog(harddog_in_fd, harddog_out_fd); harddog_in_fd = -1; harddog_out_fd = -1; timer_alive=0; - unlock_kernel(); + spin_unlock(&lock); + return 0; } -- cgit v1.2.3 From 5bbcbeca2c8933ee2b3402ea5eca523d971a8785 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Sat, 10 Feb 2007 01:43:58 -0800 Subject: [PATCH] uml: watchdog driver formatting Whitespace and style fixes. Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/drivers/harddog_kern.c | 33 +++++++++++---------------------- arch/um/drivers/harddog_user.c | 23 ++++++----------------- 2 files changed, 17 insertions(+), 39 deletions(-) (limited to 'arch') diff --git a/arch/um/drivers/harddog_kern.c b/arch/um/drivers/harddog_kern.c index 94bbcb5b9227..73c5caa7a150 100644 --- a/arch/um/drivers/harddog_kern.c +++ b/arch/um/drivers/harddog_kern.c @@ -9,10 +9,10 @@ * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. - * - * Neither Alan Cox nor CymruNet Ltd. admit liability nor provide - * warranty for any of this software. This material is provided - * "AS-IS" and at no charge. + * + * Neither Alan Cox nor CymruNet Ltd. admit liability nor provide + * warranty for any of this software. This material is provided + * "AS-IS" and at no charge. * * (c) Copyright 1995 Alan Cox * @@ -29,11 +29,11 @@ * Made SMP safe for 2.3.x * * 20011127 Joel Becker (jlbec@evilplan.org> - * Added soft_noboot; Allows testing the softdog trigger without + * Added soft_noboot; Allows testing the softdog trigger without * requiring a recompile. * Added WDIOC_GETTIMEOUT and WDIOC_SETTIMOUT. */ - + #include #include #include @@ -58,7 +58,7 @@ static int harddog_out_fd = -1; /* * Allow only one person to hold it open */ - + extern int start_watchdog(int *in_fd_ret, int *out_fd_ret, char *sock); static int harddog_open(struct inode *inode, struct file *file) @@ -69,7 +69,7 @@ static int harddog_open(struct inode *inode, struct file *file) spin_lock(&lock); if(timer_alive) goto err; -#ifdef CONFIG_HARDDOG_NOWAYOUT +#ifdef CONFIG_HARDDOG_NOWAYOUT __module_get(THIS_MODULE); #endif @@ -117,7 +117,7 @@ static ssize_t harddog_write(struct file *file, const char __user *data, size_t * Refresh the timer. */ if(len) - return(ping_watchdog(harddog_out_fd)); + return ping_watchdog(harddog_out_fd); return 0; } @@ -141,7 +141,7 @@ static int harddog_ioctl(struct inode *inode, struct file *file, case WDIOC_GETBOOTSTATUS: return put_user(0,(int __user *)argp); case WDIOC_KEEPALIVE: - return(ping_watchdog(harddog_out_fd)); + return ping_watchdog(harddog_out_fd); } } @@ -172,7 +172,7 @@ static int __init harddog_init(void) printk(banner); - return(0); + return 0; } static void __exit harddog_exit(void) @@ -182,14 +182,3 @@ static void __exit harddog_exit(void) module_init(harddog_init); module_exit(harddog_exit); - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/drivers/harddog_user.c b/arch/um/drivers/harddog_user.c index def013b5a3c7..c495ecf263b1 100644 --- a/arch/um/drivers/harddog_user.c +++ b/arch/um/drivers/harddog_user.c @@ -1,4 +1,4 @@ -/* +/* * Copyright (C) 2002 Jeff Dike (jdike@karaya.com) * Licensed under the GPL */ @@ -38,7 +38,7 @@ int start_watchdog(int *in_fd_ret, int *out_fd_ret, char *sock) int in_fds[2], out_fds[2], pid, n, err; char pid_buf[sizeof("nnnnn\0")], c; char *pid_args[] = { "/usr/bin/uml_watchdog", "-pid", pid_buf, NULL }; - char *mconsole_args[] = { "/usr/bin/uml_watchdog", "-mconsole", NULL, + char *mconsole_args[] = { "/usr/bin/uml_watchdog", "-mconsole", NULL, NULL }; char **args = NULL; @@ -96,7 +96,7 @@ int start_watchdog(int *in_fd_ret, int *out_fd_ret, char *sock) } *in_fd_ret = in_fds[0]; *out_fd_ret = out_fds[1]; - return(0); + return 0; out_close_in: os_close_file(in_fds[0]); @@ -105,7 +105,7 @@ int start_watchdog(int *in_fd_ret, int *out_fd_ret, char *sock) os_close_file(out_fds[0]); os_close_file(out_fds[1]); out: - return(err); + return err; } void stop_watchdog(int in_fd, int out_fd) @@ -123,20 +123,9 @@ int ping_watchdog(int fd) if(n != sizeof(c)){ printk("ping_watchdog - write failed, err = %d\n", -n); if(n < 0) - return(n); - return(-EIO); + return n; + return -EIO; } return 1; } - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ -- cgit v1.2.3 From b612e475e75f860002d88dd8440ce250506c5094 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Sat, 10 Feb 2007 01:43:59 -0800 Subject: [PATCH] uml: audio driver locking Comment the lack of locking and make a couple of variables static. Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/drivers/hostaudio_kern.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/um/drivers/hostaudio_kern.c b/arch/um/drivers/hostaudio_kern.c index a0d148ea63d6..f61fa0562202 100644 --- a/arch/um/drivers/hostaudio_kern.c +++ b/arch/um/drivers/hostaudio_kern.c @@ -25,9 +25,12 @@ struct hostmixer_state { #define HOSTAUDIO_DEV_DSP "/dev/sound/dsp" #define HOSTAUDIO_DEV_MIXER "/dev/sound/mixer" -/* Only changed from linux_main at boot time */ -char *dsp = HOSTAUDIO_DEV_DSP; -char *mixer = HOSTAUDIO_DEV_MIXER; +/* Changed either at boot time or module load time. At boot, this is + * single-threaded; at module load, multiple modules would each have + * their own copy of these variables. + */ +static char *dsp = HOSTAUDIO_DEV_DSP; +static char *mixer = HOSTAUDIO_DEV_MIXER; #define DSP_HELP \ " This is used to specify the host dsp device to the hostaudio driver.\n" \ -- cgit v1.2.3 From d471c0fca7eae1ffd4f7d4c11ee835ff70aaa71f Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Sat, 10 Feb 2007 01:44:00 -0800 Subject: [PATCH] uml: audio driver formatting Whitespace and style fixes. Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/drivers/hostaudio_kern.c | 160 ++++++++++++++++++--------------------- 1 file changed, 73 insertions(+), 87 deletions(-) (limited to 'arch') diff --git a/arch/um/drivers/hostaudio_kern.c b/arch/um/drivers/hostaudio_kern.c index f61fa0562202..10e08a8c17c3 100644 --- a/arch/um/drivers/hostaudio_kern.c +++ b/arch/um/drivers/hostaudio_kern.c @@ -15,11 +15,11 @@ #include "os.h" struct hostaudio_state { - int fd; + int fd; }; struct hostmixer_state { - int fd; + int fd; }; #define HOSTAUDIO_DEV_DSP "/dev/sound/dsp" @@ -72,12 +72,12 @@ MODULE_PARM_DESC(mixer, MIXER_HELP); static ssize_t hostaudio_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos) { - struct hostaudio_state *state = file->private_data; + struct hostaudio_state *state = file->private_data; void *kbuf; int err; #ifdef DEBUG - printk("hostaudio: read called, count = %d\n", count); + printk("hostaudio: read called, count = %d\n", count); #endif kbuf = kmalloc(count, GFP_KERNEL); @@ -91,7 +91,7 @@ static ssize_t hostaudio_read(struct file *file, char __user *buffer, if(copy_to_user(buffer, kbuf, err)) err = -EFAULT; - out: +out: kfree(kbuf); return(err); } @@ -99,12 +99,12 @@ static ssize_t hostaudio_read(struct file *file, char __user *buffer, static ssize_t hostaudio_write(struct file *file, const char __user *buffer, size_t count, loff_t *ppos) { - struct hostaudio_state *state = file->private_data; + struct hostaudio_state *state = file->private_data; void *kbuf; int err; #ifdef DEBUG - printk("hostaudio: write called, count = %d\n", count); + printk("hostaudio: write called, count = %d\n", count); #endif kbuf = kmalloc(count, GFP_KERNEL); @@ -128,24 +128,24 @@ static ssize_t hostaudio_write(struct file *file, const char __user *buffer, static unsigned int hostaudio_poll(struct file *file, struct poll_table_struct *wait) { - unsigned int mask = 0; + unsigned int mask = 0; #ifdef DEBUG - printk("hostaudio: poll called (unimplemented)\n"); + printk("hostaudio: poll called (unimplemented)\n"); #endif - return(mask); + return(mask); } static int hostaudio_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) { - struct hostaudio_state *state = file->private_data; + struct hostaudio_state *state = file->private_data; unsigned long data = 0; int err; #ifdef DEBUG - printk("hostaudio: ioctl called, cmd = %u\n", cmd); + printk("hostaudio: ioctl called, cmd = %u\n", cmd); #endif switch(cmd){ case SNDCTL_DSP_SPEED: @@ -182,42 +182,40 @@ static int hostaudio_ioctl(struct inode *inode, struct file *file, static int hostaudio_open(struct inode *inode, struct file *file) { - struct hostaudio_state *state; - int r = 0, w = 0; - int ret; + struct hostaudio_state *state; + int r = 0, w = 0; + int ret; #ifdef DEBUG - printk("hostaudio: open called (host: %s)\n", dsp); + printk("hostaudio: open called (host: %s)\n", dsp); #endif - state = kmalloc(sizeof(struct hostaudio_state), GFP_KERNEL); - if(state == NULL) + state = kmalloc(sizeof(struct hostaudio_state), GFP_KERNEL); + if(state == NULL) return(-ENOMEM); - if(file->f_mode & FMODE_READ) r = 1; - if(file->f_mode & FMODE_WRITE) w = 1; + if(file->f_mode & FMODE_READ) r = 1; + if(file->f_mode & FMODE_WRITE) w = 1; ret = os_open_file(dsp, of_set_rw(OPENFLAGS(), r, w), 0); - if(ret < 0){ + if(ret < 0){ kfree(state); return(ret); - } - + } state->fd = ret; - file->private_data = state; - return(0); + file->private_data = state; + return(0); } static int hostaudio_release(struct inode *inode, struct file *file) { - struct hostaudio_state *state = file->private_data; + struct hostaudio_state *state = file->private_data; #ifdef DEBUG - printk("hostaudio: release called\n"); + printk("hostaudio: release called\n"); #endif - - os_close_file(state->fd); - kfree(state); + os_close_file(state->fd); + kfree(state); return(0); } @@ -227,10 +225,10 @@ static int hostaudio_release(struct inode *inode, struct file *file) static int hostmixer_ioctl_mixdev(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) { - struct hostmixer_state *state = file->private_data; + struct hostmixer_state *state = file->private_data; #ifdef DEBUG - printk("hostmixer: ioctl called\n"); + printk("hostmixer: ioctl called\n"); #endif return(os_ioctl_generic(state->fd, cmd, arg)); @@ -238,68 +236,67 @@ static int hostmixer_ioctl_mixdev(struct inode *inode, struct file *file, static int hostmixer_open_mixdev(struct inode *inode, struct file *file) { - struct hostmixer_state *state; - int r = 0, w = 0; - int ret; + struct hostmixer_state *state; + int r = 0, w = 0; + int ret; #ifdef DEBUG - printk("hostmixer: open called (host: %s)\n", mixer); + printk("hostmixer: open called (host: %s)\n", mixer); #endif - state = kmalloc(sizeof(struct hostmixer_state), GFP_KERNEL); - if(state == NULL) return(-ENOMEM); + state = kmalloc(sizeof(struct hostmixer_state), GFP_KERNEL); + if(state == NULL) return(-ENOMEM); - if(file->f_mode & FMODE_READ) r = 1; - if(file->f_mode & FMODE_WRITE) w = 1; + if(file->f_mode & FMODE_READ) r = 1; + if(file->f_mode & FMODE_WRITE) w = 1; ret = os_open_file(mixer, of_set_rw(OPENFLAGS(), r, w), 0); - if(ret < 0){ + if(ret < 0){ printk("hostaudio_open_mixdev failed to open '%s', err = %d\n", dsp, -ret); kfree(state); return(ret); - } + } - file->private_data = state; - return(0); + file->private_data = state; + return(0); } static int hostmixer_release(struct inode *inode, struct file *file) { - struct hostmixer_state *state = file->private_data; + struct hostmixer_state *state = file->private_data; #ifdef DEBUG - printk("hostmixer: release called\n"); + printk("hostmixer: release called\n"); #endif - os_close_file(state->fd); - kfree(state); + os_close_file(state->fd); + kfree(state); return(0); } - /* kernel module operations */ static const struct file_operations hostaudio_fops = { - .owner = THIS_MODULE, - .llseek = no_llseek, - .read = hostaudio_read, - .write = hostaudio_write, - .poll = hostaudio_poll, - .ioctl = hostaudio_ioctl, - .mmap = NULL, - .open = hostaudio_open, - .release = hostaudio_release, + .owner = THIS_MODULE, + .llseek = no_llseek, + .read = hostaudio_read, + .write = hostaudio_write, + .poll = hostaudio_poll, + .ioctl = hostaudio_ioctl, + .mmap = NULL, + .open = hostaudio_open, + .release = hostaudio_release, }; static const struct file_operations hostmixer_fops = { - .owner = THIS_MODULE, - .llseek = no_llseek, - .ioctl = hostmixer_ioctl_mixdev, - .open = hostmixer_open_mixdev, - .release = hostmixer_release, + .owner = THIS_MODULE, + .llseek = no_llseek, + .ioctl = hostmixer_ioctl_mixdev, + .open = hostmixer_open_mixdev, + .release = hostmixer_release, }; struct { @@ -313,42 +310,31 @@ MODULE_LICENSE("GPL"); static int __init hostaudio_init_module(void) { - printk(KERN_INFO "UML Audio Relay (host dsp = %s, host mixer = %s)\n", + printk(KERN_INFO "UML Audio Relay (host dsp = %s, host mixer = %s)\n", dsp, mixer); module_data.dev_audio = register_sound_dsp(&hostaudio_fops, -1); - if(module_data.dev_audio < 0){ - printk(KERN_ERR "hostaudio: couldn't register DSP device!\n"); - return -ENODEV; - } + if(module_data.dev_audio < 0){ + printk(KERN_ERR "hostaudio: couldn't register DSP device!\n"); + return -ENODEV; + } module_data.dev_mixer = register_sound_mixer(&hostmixer_fops, -1); - if(module_data.dev_mixer < 0){ - printk(KERN_ERR "hostmixer: couldn't register mixer " + if(module_data.dev_mixer < 0){ + printk(KERN_ERR "hostmixer: couldn't register mixer " "device!\n"); - unregister_sound_dsp(module_data.dev_audio); - return -ENODEV; - } + unregister_sound_dsp(module_data.dev_audio); + return -ENODEV; + } - return 0; + return 0; } static void __exit hostaudio_cleanup_module (void) { - unregister_sound_mixer(module_data.dev_mixer); - unregister_sound_dsp(module_data.dev_audio); + unregister_sound_mixer(module_data.dev_mixer); + unregister_sound_dsp(module_data.dev_audio); } module_init(hostaudio_init_module); module_exit(hostaudio_cleanup_module); - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ -- cgit v1.2.3 From 84f48d4f2b511db15fda67fd38462b91abd0af53 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Sat, 10 Feb 2007 01:44:01 -0800 Subject: [PATCH] uml: mconsole locking Locking fixes. Locking was totally lacking for the mconsole_devices, which got a spin lock, and the unplugged pages data, which got a mutex. The locking of the mconsole console output code was confused. Now, the console_lock (renamed to client_lock) protects the clients list. Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/drivers/mconsole_kern.c | 21 +++++++++++++++------ arch/um/drivers/net_kern.c | 1 + arch/um/drivers/ssl.c | 1 + arch/um/drivers/ubd_kern.c | 1 + arch/um/kernel/tt/gdb_kern.c | 1 + 5 files changed, 19 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/um/drivers/mconsole_kern.c b/arch/um/drivers/mconsole_kern.c index 832d5c766ca8..b4dbd102da0e 100644 --- a/arch/um/drivers/mconsole_kern.c +++ b/arch/um/drivers/mconsole_kern.c @@ -337,13 +337,15 @@ void mconsole_stop(struct mc_request *req) mconsole_reply(req, "", 0, 0); } -/* This list is populated by __initcall routines. */ - +static DEFINE_SPINLOCK(mc_devices_lock); static LIST_HEAD(mconsole_devices); void mconsole_register_dev(struct mc_device *new) { + spin_lock(&mc_devices_lock); + BUG_ON(!list_empty(&new->list)); list_add(&new->list, &mconsole_devices); + spin_unlock(&mc_devices_lock); } static struct mc_device *mconsole_find_dev(char *name) @@ -367,6 +369,7 @@ struct unplugged_pages { void *pages[UNPLUGGED_PER_PAGE]; }; +static DECLARE_MUTEX(plug_mem_mutex); static unsigned long long unplugged_pages_count = 0; static struct list_head unplugged_pages = LIST_HEAD_INIT(unplugged_pages); static int unplug_index = UNPLUGGED_PER_PAGE; @@ -402,6 +405,7 @@ static int mem_config(char *str, char **error_out) diff /= PAGE_SIZE; + down(&plug_mem_mutex); for(i = 0; i < diff; i++){ struct unplugged_pages *unplugged; void *addr; @@ -447,7 +451,7 @@ static int mem_config(char *str, char **error_out) printk("Failed to release memory - " "errno = %d\n", err); *error_out = "Failed to release memory"; - goto out; + goto out_unlock; } unplugged->pages[unplug_index++] = addr; } @@ -457,6 +461,8 @@ static int mem_config(char *str, char **error_out) } err = 0; +out_unlock: + up(&plug_mem_mutex); out: return err; } @@ -487,6 +493,7 @@ static int mem_remove(int n, char **error_out) } static struct mc_device mem_mc = { + .list = LIST_HEAD_INIT(mem_mc.list), .name = "mem", .config = mem_config, .get_config = mem_get_config, @@ -629,7 +636,7 @@ struct mconsole_output { struct mc_request *req; }; -static DEFINE_SPINLOCK(console_lock); +static DEFINE_SPINLOCK(client_lock); static LIST_HEAD(clients); static char console_buf[MCONSOLE_MAX_DATA]; static int console_index = 0; @@ -684,16 +691,18 @@ static void with_console(struct mc_request *req, void (*proc)(void *), unsigned long flags; entry.req = req; + spin_lock_irqsave(&client_lock, flags); list_add(&entry.list, &clients); - spin_lock_irqsave(&console_lock, flags); + spin_unlock_irqrestore(&client_lock, flags); (*proc)(arg); mconsole_reply_len(req, console_buf, console_index, 0, 0); console_index = 0; - spin_unlock_irqrestore(&console_lock, flags); + spin_lock_irqsave(&client_lock, flags); list_del(&entry.list); + spin_unlock_irqrestore(&client_lock, flags); } #ifdef CONFIG_MAGIC_SYSRQ diff --git a/arch/um/drivers/net_kern.c b/arch/um/drivers/net_kern.c index eede892a4f38..c1838645ae28 100644 --- a/arch/um/drivers/net_kern.c +++ b/arch/um/drivers/net_kern.c @@ -690,6 +690,7 @@ static int net_remove(int n, char **error_out) } static struct mc_device net_mc = { + .list = LIST_HEAD_INIT(net_mc.list), .name = "eth", .config = net_config, .get_config = NULL, diff --git a/arch/um/drivers/ssl.c b/arch/um/drivers/ssl.c index 1e82430b8444..fe400acc9751 100644 --- a/arch/um/drivers/ssl.c +++ b/arch/um/drivers/ssl.c @@ -64,6 +64,7 @@ static struct line_driver driver = { .symlink_from = "serial", .symlink_to = "tts", .mc = { + .list = LIST_HEAD_INIT(driver.mc.list), .name = "ssl", .config = ssl_config, .get_config = ssl_get_config, diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c index f4db97efc014..c1d40fb738e6 100644 --- a/arch/um/drivers/ubd_kern.c +++ b/arch/um/drivers/ubd_kern.c @@ -828,6 +828,7 @@ out: * ubd-specific locks. */ static struct mc_device ubd_mc = { + .list = LIST_HEAD_INIT(ubd_mc.list), .name = "ubd", .config = ubd_config, .get_config = ubd_get_config, diff --git a/arch/um/kernel/tt/gdb_kern.c b/arch/um/kernel/tt/gdb_kern.c index a1af96ef9ee2..03b06bc00771 100644 --- a/arch/um/kernel/tt/gdb_kern.c +++ b/arch/um/kernel/tt/gdb_kern.c @@ -12,6 +12,7 @@ extern int gdb_config(char *str, char **error_out); extern int gdb_remove(int n, char **error_out); static struct mc_device gdb_mc = { + .list = INIT_LIST_HEAD(gdb_mc.list), .name = "gdb", .config = gdb_config, .remove = gdb_remove, -- cgit v1.2.3 From d832fc60d533d52da7170cf5f95271c331259bca Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Sat, 10 Feb 2007 01:44:01 -0800 Subject: [PATCH] uml: make two variables static Make a couple of variables static. Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/drivers/port_kern.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/um/drivers/port_kern.c b/arch/um/drivers/port_kern.c index 6dfe632f1c14..c688da722177 100644 --- a/arch/um/drivers/port_kern.c +++ b/arch/um/drivers/port_kern.c @@ -129,8 +129,8 @@ static int port_accept(struct port_list *port) return(ret); } -DECLARE_MUTEX(ports_sem); -struct list_head ports = LIST_HEAD_INIT(ports); +static DECLARE_MUTEX(ports_sem); +static struct list_head ports = LIST_HEAD_INIT(ports); void port_work_proc(struct work_struct *unused) { -- cgit v1.2.3 From 67608e0c809ceca1b44755ee818199af7478ca77 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Sat, 10 Feb 2007 01:44:02 -0800 Subject: [PATCH] uml: port driver formatting Whitespace and style fixes. Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/drivers/port_kern.c | 46 ++++++++++++++++++++-------------------- arch/um/drivers/port_user.c | 51 ++++++++++++++++++--------------------------- 2 files changed, 43 insertions(+), 54 deletions(-) (limited to 'arch') diff --git a/arch/um/drivers/port_kern.c b/arch/um/drivers/port_kern.c index c688da722177..4dd7d8a11db2 100644 --- a/arch/um/drivers/port_kern.c +++ b/arch/um/drivers/port_kern.c @@ -1,4 +1,4 @@ -/* +/* * Copyright (C) 2001, 2002 Jeff Dike (jdike@karaya.com) * Licensed under the GPL */ @@ -55,9 +55,9 @@ static irqreturn_t pipe_interrupt(int irq, void *data) fd = os_rcv_fd(conn->socket[0], &conn->helper_pid); if(fd < 0){ if(fd == -EAGAIN) - return(IRQ_NONE); + return IRQ_NONE; - printk(KERN_ERR "pipe_interrupt : os_rcv_fd returned %d\n", + printk(KERN_ERR "pipe_interrupt : os_rcv_fd returned %d\n", -fd); os_close_file(conn->fd); } @@ -68,7 +68,7 @@ static irqreturn_t pipe_interrupt(int irq, void *data) list_add(&conn->list, &conn->port->connections); complete(&conn->port->done); - return(IRQ_HANDLED); + return IRQ_HANDLED; } #define NO_WAITER_MSG \ @@ -97,14 +97,14 @@ static int port_accept(struct port_list *port) "connection\n"); goto out_close; } - *conn = ((struct connection) + *conn = ((struct connection) { .list = LIST_HEAD_INIT(conn->list), .fd = fd, .socket = { socket[0], socket[1] }, .telnetd_pid = pid, .port = port }); - if(um_request_irq(TELNETD_IRQ, socket[0], IRQ_READ, pipe_interrupt, + if(um_request_irq(TELNETD_IRQ, socket[0], IRQ_READ, pipe_interrupt, IRQF_DISABLED | IRQF_SHARED | IRQF_SAMPLE_RANDOM, "telnetd", conn)){ printk(KERN_ERR "port_accept : failed to get IRQ for " @@ -117,17 +117,17 @@ static int port_accept(struct port_list *port) printk("No one waiting for port\n"); } list_add(&conn->list, &port->pending); - return(1); + return 1; out_free: kfree(conn); out_close: os_close_file(fd); - if(pid != -1) + if(pid != -1) os_kill_process(pid, 1); out: - return(ret); -} + return ret; +} static DECLARE_MUTEX(ports_sem); static struct list_head ports = LIST_HEAD_INIT(ports); @@ -158,8 +158,8 @@ static irqreturn_t port_interrupt(int irq, void *data) port->has_connection = 1; schedule_work(&port_work); - return(IRQ_HANDLED); -} + return IRQ_HANDLED; +} void *port_data(int port_num) { @@ -185,14 +185,14 @@ void *port_data(int port_num) port_num, -fd); goto out_free; } - if(um_request_irq(ACCEPT_IRQ, fd, IRQ_READ, port_interrupt, - IRQF_DISABLED | IRQF_SHARED | IRQF_SAMPLE_RANDOM, "port", - port)){ + if(um_request_irq(ACCEPT_IRQ, fd, IRQ_READ, port_interrupt, + IRQF_DISABLED | IRQF_SHARED | IRQF_SAMPLE_RANDOM, + "port", port)){ printk(KERN_ERR "Failed to get IRQ for port %d\n", port_num); goto out_close; } - *port = ((struct port_list) + *port = ((struct port_list) { .list = LIST_HEAD_INIT(port->list), .wait_count = ATOMIC_INIT(0), .has_connection = 0, @@ -222,7 +222,7 @@ void *port_data(int port_num) os_close_file(fd); out: up(&ports_sem); - return(dev); + return dev; } int port_wait(void *data) @@ -232,15 +232,15 @@ int port_wait(void *data) struct port_list *port = dev->port; int fd; - atomic_inc(&port->wait_count); + atomic_inc(&port->wait_count); while(1){ fd = -ERESTARTSYS; - if(wait_for_completion_interruptible(&port->done)) - goto out; + if(wait_for_completion_interruptible(&port->done)) + goto out; spin_lock(&port->lock); - conn = list_entry(port->connections.next, struct connection, + conn = list_entry(port->connections.next, struct connection, list); list_del(&conn->list); spin_unlock(&port->lock); @@ -248,12 +248,12 @@ int port_wait(void *data) os_shutdown_socket(conn->socket[0], 1, 1); os_close_file(conn->socket[0]); os_shutdown_socket(conn->socket[1], 1, 1); - os_close_file(conn->socket[1]); + os_close_file(conn->socket[1]); /* This is done here because freeing an IRQ can't be done * within the IRQ handler. So, pipe_interrupt always ups * the semaphore regardless of whether it got a successful - * connection. Then we loop here throwing out failed + * connection. Then we loop here throwing out failed * connections until a good one is found. */ free_irq(TELNETD_IRQ, conn); diff --git a/arch/um/drivers/port_user.c b/arch/um/drivers/port_user.c index bc6afaf74c1a..80508023054f 100644 --- a/arch/um/drivers/port_user.c +++ b/arch/um/drivers/port_user.c @@ -1,4 +1,4 @@ -/* +/* * Copyright (C) 2001 Jeff Dike (jdike@karaya.com) * Licensed under the GPL */ @@ -38,18 +38,18 @@ static void *port_init(char *str, int device, const struct chan_opts *opts) if(*str != ':'){ printk("port_init : channel type 'port' must specify a " "port number\n"); - return(NULL); + return NULL; } str++; port = strtoul(str, &end, 0); if((*end != '\0') || (end == str)){ printk("port_init : couldn't parse port '%s'\n", str); - return(NULL); + return NULL; } kern_data = port_data(port); if(kern_data == NULL) - return(NULL); + return NULL; data = um_kmalloc(sizeof(*data)); if(data == NULL) @@ -59,10 +59,10 @@ static void *port_init(char *str, int device, const struct chan_opts *opts) .kernel_data = kern_data }); sprintf(data->dev, "%d", port); - return(data); + return data; err: port_kern_free(kern_data); - return(NULL); + return NULL; } static void port_free(void *d) @@ -83,14 +83,14 @@ static int port_open(int input, int output, int primary, void *d, if((fd >= 0) && data->raw){ CATCH_EINTR(err = tcgetattr(fd, &data->tt)); if(err) - return(err); + return err; err = raw(fd); if(err) - return(err); + return err; } *dev_out = data->dev; - return(fd); + return fd; } static void port_close(int fd, void *d) @@ -120,8 +120,8 @@ int port_listen_fd(int port) int fd, err, arg; fd = socket(PF_INET, SOCK_STREAM, 0); - if(fd == -1) - return(-errno); + if(fd == -1) + return -errno; arg = 1; if(setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, &arg, sizeof(arg)) < 0){ @@ -136,7 +136,7 @@ int port_listen_fd(int port) err = -errno; goto out; } - + if(listen(fd, 1) < 0){ err = -errno; goto out; @@ -146,10 +146,10 @@ int port_listen_fd(int port) if(err < 0) goto out; - return(fd); + return fd; out: os_close_file(fd); - return(err); + return err; } struct port_pre_exec_data { @@ -173,13 +173,13 @@ void port_pre_exec(void *arg) int port_connection(int fd, int *socket, int *pid_out) { int new, err; - char *argv[] = { "/usr/sbin/in.telnetd", "-L", + char *argv[] = { "/usr/sbin/in.telnetd", "-L", "/usr/lib/uml/port-helper", NULL }; struct port_pre_exec_data data; new = os_accept_connection(fd); if(new < 0) - return(new); + return new; err = os_pipe(socket, 0, 0); if(err < 0) @@ -190,29 +190,18 @@ int port_connection(int fd, int *socket, int *pid_out) .pipe_fd = socket[1] }); err = run_helper(port_pre_exec, &data, argv, NULL); - if(err < 0) + if(err < 0) goto out_shutdown; *pid_out = err; - return(new); + return new; out_shutdown: os_shutdown_socket(socket[0], 1, 1); os_close_file(socket[0]); - os_shutdown_socket(socket[1], 1, 1); + os_shutdown_socket(socket[1], 1, 1); os_close_file(socket[1]); out_close: os_close_file(new); - return(err); + return err; } - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ -- cgit v1.2.3 From f9795220521e0575dfd4ed0737d3a7848264662c Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Sat, 10 Feb 2007 01:44:03 -0800 Subject: [PATCH] uml: Kill a compilation warning Kill a compilation warning. Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/kernel/exec.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/um/kernel/exec.c b/arch/um/kernel/exec.c index 8d56ec6cca79..121166400e25 100644 --- a/arch/um/kernel/exec.c +++ b/arch/um/kernel/exec.c @@ -39,9 +39,9 @@ static long execve1(char *file, char __user * __user *argv, char __user *__user *env) { long error; +#ifdef CONFIG_TTY_LOG struct tty_struct *tty; -#ifdef CONFIG_TTY_LOG mutex_lock(&tty_mutex); tty = get_current_tty(); if (tty) -- cgit v1.2.3 From c862fc32a3ee4319c652f4ff39462d030120c380 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Sat, 10 Feb 2007 01:44:04 -0800 Subject: [PATCH] uml: network driver locking and code cleanup Add some missing locking to walks of the transports and opened lists. Delete some dead code. Comment the lack of some locking. Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/drivers/net_kern.c | 42 ++++++++++++++++++------------------------ 1 file changed, 18 insertions(+), 24 deletions(-) (limited to 'arch') diff --git a/arch/um/drivers/net_kern.c b/arch/um/drivers/net_kern.c index c1838645ae28..04e31f86c10a 100644 --- a/arch/um/drivers/net_kern.c +++ b/arch/um/drivers/net_kern.c @@ -502,7 +502,7 @@ static DEFINE_SPINLOCK(transports_lock); static LIST_HEAD(transports); /* Filled in during early boot */ -struct list_head eth_cmd_line = LIST_HEAD_INIT(eth_cmd_line); +static LIST_HEAD(eth_cmd_line); static int check_transport(struct transport *transport, char *eth, int n, void **init_out, char **mac_out) @@ -563,7 +563,9 @@ static int eth_setup_common(char *str, int index) struct transport *transport; void *init; char *mac = NULL; + int found = 0; + spin_lock(&transports_lock); list_for_each(ele, &transports){ transport = list_entry(ele, struct transport, list); if(!check_transport(transport, str, index, &init, &mac)) @@ -572,9 +574,12 @@ static int eth_setup_common(char *str, int index) eth_configure(index, init, mac, transport); kfree(init); } - return 1; + found = 1; + break; } - return 0; + + spin_unlock(&transports_lock); + return found; } static int eth_setup(char *str) @@ -610,24 +615,6 @@ __uml_help(eth_setup, " Configure a network device.\n\n" ); -#if 0 -static int eth_init(void) -{ - struct list_head *ele, *next; - struct eth_init *eth; - - list_for_each_safe(ele, next, ð_cmd_line){ - eth = list_entry(ele, struct eth_init, list); - - if(eth_setup_common(eth->init, eth->index)) - list_del(ð->list); - } - - return(1); -} -__initcall(eth_init); -#endif - static int net_config(char *str, char **error_out) { int n, err; @@ -729,6 +716,7 @@ static int uml_inetaddr_event(struct notifier_block *this, unsigned long event, return NOTIFY_DONE; } +/* uml_net_init shouldn't be called twice on two CPUs at the same time */ struct notifier_block uml_inetaddr_notifier = { .notifier_call = uml_inetaddr_event, }; @@ -747,18 +735,21 @@ static int uml_net_init(void) * didn't get a chance to run for them. This fakes it so that * addresses which have already been set up get handled properly. */ + spin_lock(&opened_lock); list_for_each(ele, &opened){ lp = list_entry(ele, struct uml_net_private, list); ip = lp->dev->ip_ptr; - if(ip == NULL) continue; + if(ip == NULL) + continue; in = ip->ifa_list; while(in != NULL){ uml_inetaddr_event(NULL, NETDEV_UP, in); in = in->ifa_next; } } + spin_unlock(&opened_lock); - return(0); + return 0; } __initcall(uml_net_init); @@ -768,13 +759,16 @@ static void close_devices(void) struct list_head *ele; struct uml_net_private *lp; + spin_lock(&opened_lock); list_for_each(ele, &opened){ lp = list_entry(ele, struct uml_net_private, list); free_irq(lp->dev->irq, lp->dev); if((lp->close != NULL) && (lp->fd >= 0)) (*lp->close)(lp->fd, &lp->user); - if(lp->remove != NULL) (*lp->remove)(&lp->user); + if(lp->remove != NULL) + (*lp->remove)(&lp->user); } + spin_unlock(&opened_lock); } __uml_exitcall(close_devices); -- cgit v1.2.3 From c59bce6262f9511c8e2504231f60609bf7332833 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Sat, 10 Feb 2007 01:44:04 -0800 Subject: [PATCH] uml: use LIST_HEAD where possible A couple of list_head declarations can be improved through the use of LIST_HEAD(). Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/drivers/mconsole_kern.c | 2 +- arch/um/drivers/port_kern.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/um/drivers/mconsole_kern.c b/arch/um/drivers/mconsole_kern.c index b4dbd102da0e..a5a683d6fc5c 100644 --- a/arch/um/drivers/mconsole_kern.c +++ b/arch/um/drivers/mconsole_kern.c @@ -371,7 +371,7 @@ struct unplugged_pages { static DECLARE_MUTEX(plug_mem_mutex); static unsigned long long unplugged_pages_count = 0; -static struct list_head unplugged_pages = LIST_HEAD_INIT(unplugged_pages); +static LIST_HEAD(unplugged_pages); static int unplug_index = UNPLUGGED_PER_PAGE; static int mem_config(char *str, char **error_out) diff --git a/arch/um/drivers/port_kern.c b/arch/um/drivers/port_kern.c index 4dd7d8a11db2..1c8efd95c421 100644 --- a/arch/um/drivers/port_kern.c +++ b/arch/um/drivers/port_kern.c @@ -130,7 +130,7 @@ static int port_accept(struct port_list *port) } static DECLARE_MUTEX(ports_sem); -static struct list_head ports = LIST_HEAD_INIT(ports); +static LIST_HEAD(ports); void port_work_proc(struct work_struct *unused) { -- cgit v1.2.3 From 99b0278f95fc9d55adf65133dc678167a88b632a Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Sat, 10 Feb 2007 01:44:05 -0800 Subject: [PATCH] uml: locking commentary in the random driver Comment the lack of locking. Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/drivers/random.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/um/drivers/random.c b/arch/um/drivers/random.c index 73b2bdd6d2d3..e942e836f995 100644 --- a/arch/um/drivers/random.c +++ b/arch/um/drivers/random.c @@ -78,6 +78,7 @@ static const struct file_operations rng_chrdev_ops = { .read = rng_dev_read, }; +/* rng_init shouldn't be called more than once at boot time */ static struct miscdevice rng_miscdev = { RNG_MISCDEV_MINOR, RNG_MODULE_NAME, -- cgit v1.2.3 From a52f362f864f56238c9036f5c56f763a80e2ddd5 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Sat, 10 Feb 2007 01:44:06 -0800 Subject: [PATCH] uml: mostly const a structure The chan_opts structure is mostly const, and needs no locking. Comment the lack of locking on the one field that can change. Make all the other fields const. It turned out that console_open_chan didn't use its chan_opts argument, so that is deleted from the function and its callers. Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/drivers/chan_kern.c | 5 ++--- arch/um/drivers/ssl.c | 3 ++- arch/um/drivers/stdio_console.c | 3 ++- arch/um/include/chan_kern.h | 3 +-- arch/um/include/chan_user.h | 8 ++++---- 5 files changed, 11 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/um/drivers/chan_kern.c b/arch/um/drivers/chan_kern.c index bce9b3427b09..7b8baf146acc 100644 --- a/arch/um/drivers/chan_kern.c +++ b/arch/um/drivers/chan_kern.c @@ -354,8 +354,7 @@ int console_write_chan(struct list_head *chans, const char *buf, int len) return ret; } -int console_open_chan(struct line *line, struct console *co, - const struct chan_opts *opts) +int console_open_chan(struct line *line, struct console *co) { int err; @@ -363,7 +362,7 @@ int console_open_chan(struct line *line, struct console *co, if(err) return err; - printk("Console initialized on /dev/%s%d\n",co->name,co->index); + printk("Console initialized on /dev/%s%d\n", co->name, co->index); return 0; } diff --git a/arch/um/drivers/ssl.c b/arch/um/drivers/ssl.c index fe400acc9751..475de52783e4 100644 --- a/arch/um/drivers/ssl.c +++ b/arch/um/drivers/ssl.c @@ -38,6 +38,7 @@ static void ssl_announce(char *dev_name, int dev) dev_name); } +/* Almost const, except that xterm_title may be changed in an initcall */ static struct chan_opts opts = { .announce = ssl_announce, .xterm_title = "Serial Line #%d", @@ -171,7 +172,7 @@ static int ssl_console_setup(struct console *co, char *options) { struct line *line = &serial_lines[co->index]; - return console_open_chan(line, co, &opts); + return console_open_chan(line, co); } static struct console ssl_cons = { diff --git a/arch/um/drivers/stdio_console.c b/arch/um/drivers/stdio_console.c index 0b1bca498049..a83c42c263b3 100644 --- a/arch/um/drivers/stdio_console.c +++ b/arch/um/drivers/stdio_console.c @@ -42,6 +42,7 @@ void stdio_announce(char *dev_name, int dev) dev_name); } +/* Almost const, except that xterm_title may be changed in an initcall */ static struct chan_opts opts = { .announce = stdio_announce, .xterm_title = "Virtual Console #%d", @@ -144,7 +145,7 @@ static int uml_console_setup(struct console *co, char *options) { struct line *line = &vts[co->index]; - return console_open_chan(line, co, &opts); + return console_open_chan(line, co); } static struct console stdiocons = { diff --git a/arch/um/include/chan_kern.h b/arch/um/include/chan_kern.h index 2d9aa7ef4c27..c4b41bb1035f 100644 --- a/arch/um/include/chan_kern.h +++ b/arch/um/include/chan_kern.h @@ -36,8 +36,7 @@ extern int write_chan(struct list_head *chans, const char *buf, int len, int write_irq); extern int console_write_chan(struct list_head *chans, const char *buf, int len); -extern int console_open_chan(struct line *line, struct console *co, - const struct chan_opts *opts); +extern int console_open_chan(struct line *line, struct console *co); extern void deactivate_chan(struct list_head *chans, int irq); extern void reactivate_chan(struct list_head *chans, int irq); extern void chan_enable_winch(struct list_head *chans, struct tty_struct *tty); diff --git a/arch/um/include/chan_user.h b/arch/um/include/chan_user.h index a795547a1dbd..ad671eb9edeb 100644 --- a/arch/um/include/chan_user.h +++ b/arch/um/include/chan_user.h @@ -9,11 +9,11 @@ #include "init.h" struct chan_opts { - void (*announce)(char *dev_name, int dev); + void (*const announce)(char *dev_name, int dev); char *xterm_title; - int raw; - unsigned long tramp_stack; - int in_kernel; + const int raw; + const unsigned long tramp_stack; + const int in_kernel; }; enum chan_init_pri { INIT_STATIC, INIT_ALL, INIT_ONE }; -- cgit v1.2.3 From b4ac91a0eac36f347a509afda07e4305e931de61 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Sat, 10 Feb 2007 01:44:07 -0800 Subject: [PATCH] uml: chan_user.h formatting fixes Whitespace fixes and emacs comment removal. Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/include/chan_user.h | 13 +------------ 1 file changed, 1 insertion(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/um/include/chan_user.h b/arch/um/include/chan_user.h index ad671eb9edeb..38f16d812e7c 100644 --- a/arch/um/include/chan_user.h +++ b/arch/um/include/chan_user.h @@ -1,4 +1,4 @@ -/* +/* * Copyright (C) 2000, 2001 Jeff Dike (jdike@karaya.com) * Licensed under the GPL */ @@ -54,14 +54,3 @@ __uml_help(fn, prefix "[0-9]*=\n" \ ); #endif - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ -- cgit v1.2.3 From d5c9ffc6c6d15d4f655236e26942a21ad61fe3ad Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Sat, 10 Feb 2007 01:44:08 -0800 Subject: [PATCH] uml: console locking commentary and code cleanup Remove the last vestiges of devfs from console registration. Change the name of the function, plus remove a couple of unused fields from the line_driver structure. struct lines is no longer needed, all traces of it are gone. The only way that I can see to mark a structure as being almost-const is to individually const the fields. This is the case for the line_driver structure, which has only one modifiable field - a list_head in a sub-structure. Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/drivers/line.c | 7 +++---- arch/um/drivers/ssl.c | 16 +++++++--------- arch/um/drivers/stdio_console.c | 17 +++++++---------- arch/um/include/line.h | 36 ++++++++++++++---------------------- 4 files changed, 31 insertions(+), 45 deletions(-) (limited to 'arch') diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c index e620ed46ed3f..433e572fb196 100644 --- a/arch/um/drivers/line.c +++ b/arch/um/drivers/line.c @@ -707,10 +707,9 @@ int line_remove(struct line *lines, unsigned int num, int n, char **error_out) return err; } -struct tty_driver *line_register_devfs(struct lines *set, - struct line_driver *line_driver, - const struct tty_operations *ops, - struct line *lines, int nlines) +struct tty_driver *register_lines(struct line_driver *line_driver, + const struct tty_operations *ops, + struct line *lines, int nlines) { int i; struct tty_driver *driver = alloc_tty_driver(nlines); diff --git a/arch/um/drivers/ssl.c b/arch/um/drivers/ssl.c index 475de52783e4..fc22b9bd9153 100644 --- a/arch/um/drivers/ssl.c +++ b/arch/um/drivers/ssl.c @@ -51,6 +51,8 @@ static int ssl_config(char *str, char **error_out); static int ssl_get_config(char *dev, char *str, int size, char **error_out); static int ssl_remove(int n, char **error_out); + +/* Const, except for .mc.list */ static struct line_driver driver = { .name = "UML serial line", .device_name = "ttyS", @@ -62,8 +64,6 @@ static struct line_driver driver = { .read_irq_name = "ssl", .write_irq = SSL_WRITE_IRQ, .write_irq_name = "ssl-write", - .symlink_from = "serial", - .symlink_to = "tts", .mc = { .list = LIST_HEAD_INIT(driver.mc.list), .name = "ssl", @@ -74,14 +74,12 @@ static struct line_driver driver = { }, }; -/* The array is initialized by line_init, which is an initcall. The - * individual elements are protected by individual semaphores. +/* The array is initialized by line_init, at initcall time. The + * elements are locked individually as needed. */ static struct line serial_lines[NR_PORTS] = { [0 ... NR_PORTS - 1] = LINE_INIT(CONFIG_SSL_CHAN, &driver) }; -static struct lines lines = LINES_INIT(NR_PORTS); - static int ssl_config(char *str, char **error_out) { return line_config(serial_lines, ARRAY_SIZE(serial_lines), str, &opts, @@ -175,6 +173,7 @@ static int ssl_console_setup(struct console *co, char *options) return console_open_chan(line, co); } +/* No locking for register_console call - relies on single-threaded initcalls */ static struct console ssl_cons = { .name = "ttyS", .write = ssl_console_write, @@ -190,9 +189,8 @@ static int ssl_init(void) printk(KERN_INFO "Initializing software serial port version %d\n", ssl_version); - ssl_driver = line_register_devfs(&lines, &driver, &ssl_ops, - serial_lines, - ARRAY_SIZE(serial_lines)); + ssl_driver = register_lines(&driver, &ssl_ops, serial_lines, + ARRAY_SIZE(serial_lines)); lines_init(serial_lines, ARRAY_SIZE(serial_lines), &opts); diff --git a/arch/um/drivers/stdio_console.c b/arch/um/drivers/stdio_console.c index a83c42c263b3..8dccdd193d94 100644 --- a/arch/um/drivers/stdio_console.c +++ b/arch/um/drivers/stdio_console.c @@ -55,6 +55,8 @@ static int con_config(char *str, char **error_out); static int con_get_config(char *dev, char *str, int size, char **error_out); static int con_remove(int n, char **con_remove); + +/* Const, except for .mc.list */ static struct line_driver driver = { .name = "UML console", .device_name = "tty", @@ -66,8 +68,6 @@ static struct line_driver driver = { .read_irq_name = "console", .write_irq = CONSOLE_WRITE_IRQ, .write_irq_name = "console-write", - .symlink_from = "ttys", - .symlink_to = "vc", .mc = { .name = "con", .config = con_config, @@ -77,10 +77,8 @@ static struct line_driver driver = { }, }; -static struct lines console_lines = LINES_INIT(MAX_TTYS); - -/* The array is initialized by line_init, which is an initcall. The - * individual elements are protected by individual semaphores. +/* The array is initialized by line_init, at initcall time. The + * elements are locked individually as needed. */ static struct line vts[MAX_TTYS] = { LINE_INIT(CONFIG_CON_ZERO_CHAN, &driver), [ 1 ... MAX_TTYS - 1 ] = @@ -148,6 +146,7 @@ static int uml_console_setup(struct console *co, char *options) return console_open_chan(line, co); } +/* No locking for register_console call - relies on single-threaded initcalls */ static struct console stdiocons = { .name = "tty", .write = uml_console_write, @@ -155,16 +154,14 @@ static struct console stdiocons = { .setup = uml_console_setup, .flags = CON_PRINTBUFFER, .index = -1, - .data = &vts, }; int stdio_init(void) { char *new_title; - console_driver = line_register_devfs(&console_lines, &driver, - &console_ops, vts, - ARRAY_SIZE(vts)); + console_driver = register_lines(&driver, &console_ops, vts, + ARRAY_SIZE(vts)); if (console_driver == NULL) return -1; printk(KERN_INFO "Initialized stdio console driver\n"); diff --git a/arch/um/include/line.h b/arch/um/include/line.h index a2486b4cc9fe..3477a858eaa9 100644 --- a/arch/um/include/line.h +++ b/arch/um/include/line.h @@ -15,19 +15,18 @@ #include "chan_user.h" #include "mconsole_kern.h" +/* There's only one modifiable field in this - .mc.list */ struct line_driver { - char *name; - char *device_name; - short major; - short minor_start; - short type; - short subtype; - int read_irq; - char *read_irq_name; - int write_irq; - char *write_irq_name; - char *symlink_from; - char *symlink_to; + const char *name; + const char *device_name; + const short major; + const short minor_start; + const short type; + const short subtype; + const int read_irq; + const char *read_irq_name; + const int write_irq; + const char *write_irq_name; struct mc_device mc; }; @@ -67,12 +66,6 @@ struct line { .lock = SPIN_LOCK_UNLOCKED, \ .driver = d } -struct lines { - int num; -}; - -#define LINES_INIT(n) { .num = n } - extern void line_close(struct tty_struct *tty, struct file * filp); extern int line_open(struct line *lines, struct tty_struct *tty); extern int line_setup(struct line *lines, unsigned int sizeof_lines, @@ -94,10 +87,9 @@ extern char *add_xterm_umid(char *base); extern int line_setup_irq(int fd, int input, int output, struct line *line, void *data); extern void line_close_chan(struct line *line); -extern struct tty_driver * line_register_devfs(struct lines *set, - struct line_driver *line_driver, - const struct tty_operations *driver, - struct line *lines, int nlines); +extern struct tty_driver *register_lines(struct line_driver *line_driver, + const struct tty_operations *driver, + struct line *lines, int nlines); extern void lines_init(struct line *lines, int nlines, struct chan_opts *opts); extern void close_lines(struct line *lines, int nlines); -- cgit v1.2.3 From c6256c68248cfccbeec07ced442ffe395fa393e8 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Sat, 10 Feb 2007 01:44:08 -0800 Subject: [PATCH] uml: fix previous console locking Eliminate the open_mutex after complaints from Blaisorblade. It turns out that the tty count provides the information needed to tell whether we are the first opener or last closer. Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/drivers/line.c | 48 ++++++++---------------------------------------- arch/um/include/line.h | 1 - 2 files changed, 8 insertions(+), 41 deletions(-) (limited to 'arch') diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c index 433e572fb196..0e1e9a20a4d6 100644 --- a/arch/um/drivers/line.c +++ b/arch/um/drivers/line.c @@ -425,42 +425,15 @@ int line_setup_irq(int fd, int input, int output, struct line *line, void *data) * However, in this case, mconsole requests can come in "from the * side", and race with opens and closes. * - * The problem comes from line_setup not wanting to sleep if - * the device is open or being opened. This can happen because the - * first opener of a device is responsible for setting it up on the - * host, and that can sleep. The open of a port device will sleep - * until someone telnets to it. + * mconsole config requests will want to be sure the device isn't in + * use, and get_config, open, and close will want a stable + * configuration. The checking and modification of the configuration + * is done under a spinlock. Checking whether the device is in use is + * line->tty->count > 1, also under the spinlock. * - * The obvious solution of putting everything under a mutex fails - * because then trying (and failing) to change the configuration of an - * open(ing) device will block until the open finishes. The right - * thing to happen is for it to fail immediately. - * - * We can put the opening (and closing) of the host device under a - * separate lock, but that has to be taken before the count lock is - * released. Otherwise, you open a window in which another open can - * come through and assume that the host side is opened and working. - * - * So, if the tty count is one, open will take the open mutex - * inside the count lock. Otherwise, it just returns. This will sleep - * if the last close is pending, and will block a setup or get_config, - * but that should not last long. - * - * So, what we end up with is that open and close take the count lock. - * If the first open or last close are happening, then the open mutex - * is taken inside the count lock and the host opening or closing is done. - * - * setup and get_config only take the count lock. setup modifies the - * device configuration only if the open count is zero. Arbitrarily - * long blocking of setup doesn't happen because something would have to be - * waiting for an open to happen. However, a second open with - * tty->count == 1 can't happen, and a close can't happen until the open - * had finished. - * - * We can't maintain our own count here because the tty layer doesn't - * match opens and closes. It will call close if an open failed, and - * a tty hangup will result in excess closes. So, we rely on - * tty->count instead. It is one on both the first open and last close. + * tty->count serves to decide whether the device should be enabled or + * disabled on the host. If it's equal to 1, then we are doing the + * first open or last close. Otherwise, open and close just return. */ int line_open(struct line *lines, struct tty_struct *tty) @@ -476,7 +449,6 @@ int line_open(struct line *lines, struct tty_struct *tty) if(tty->count > 1) goto out_unlock; - mutex_lock(&line->open_mutex); spin_unlock(&line->count_lock); tty->driver_data = line; @@ -493,7 +465,6 @@ int line_open(struct line *lines, struct tty_struct *tty) chan_window_size(&line->chan_list, &tty->winsize.ws_row, &tty->winsize.ws_col); - mutex_unlock(&line->open_mutex); return err; out_unlock: @@ -523,7 +494,6 @@ void line_close(struct tty_struct *tty, struct file * filp) if(tty->count > 1) goto out_unlock; - mutex_lock(&line->open_mutex); spin_unlock(&line->count_lock); line->tty = NULL; @@ -534,7 +504,6 @@ void line_close(struct tty_struct *tty, struct file * filp) line->sigio = 0; } - mutex_unlock(&line->open_mutex); return; out_unlock: @@ -755,7 +724,6 @@ void lines_init(struct line *lines, int nlines, struct chan_opts *opts) for(i = 0; i < nlines; i++){ line = &lines[i]; INIT_LIST_HEAD(&line->chan_list); - mutex_init(&line->open_mutex); if(line->init_str == NULL) continue; diff --git a/arch/um/include/line.h b/arch/um/include/line.h index 3477a858eaa9..1223f2c844b4 100644 --- a/arch/um/include/line.h +++ b/arch/um/include/line.h @@ -35,7 +35,6 @@ struct line { spinlock_t count_lock; int valid; - struct mutex open_mutex; char *init_str; int init_pri; struct list_head chan_list; -- cgit v1.2.3 From 94c282d79e17a83ccc876990e05378ed6dfbccae Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Sat, 10 Feb 2007 01:44:09 -0800 Subject: [PATCH] uml: locking comments in iomem driver Comment some lack of locking in the iomem driver. Also, a couple of variables are in the wrong place, so they are moved. Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/kernel/mem.c | 10 ---------- arch/um/kernel/physmem.c | 17 +++++++++++++++++ 2 files changed, 17 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/um/kernel/mem.c b/arch/um/kernel/mem.c index c95855ba6ab5..fb11992f0b8a 100644 --- a/arch/um/kernel/mem.c +++ b/arch/um/kernel/mem.c @@ -367,16 +367,6 @@ struct page *pte_alloc_one(struct mm_struct *mm, unsigned long address) return pte; } -struct iomem_region *iomem_regions = NULL; -int iomem_size = 0; - -extern int parse_iomem(char *str, int *add) __init; - -__uml_setup("iomem=", parse_iomem, -"iomem=,\n" -" Configure as an IO memory region named .\n\n" -); - /* * Overrides for Emacs so that we follow Linus's tabbing style. * Emacs will notice this stuff at the end of the file and automatically diff --git a/arch/um/kernel/physmem.c b/arch/um/kernel/physmem.c index abafa64b8727..22d3cf359669 100644 --- a/arch/um/kernel/physmem.c +++ b/arch/um/kernel/physmem.c @@ -398,6 +398,23 @@ __uml_setup("mem=", uml_mem_setup, " Example: mem=64M\n\n" ); +extern int __init parse_iomem(char *str, int *add); + +__uml_setup("iomem=", parse_iomem, +"iomem=,\n" +" Configure as an IO memory region named .\n\n" +); + +/* + * This list is constructed in parse_iomem and addresses filled in in + * setup_iomem, both of which run during early boot. Afterwards, it's + * unchanged. + */ +struct iomem_region *iomem_regions = NULL; + +/* Initialized in parse_iomem */ +int iomem_size = 0; + unsigned long find_iomem(char *driver, unsigned long *len_out) { struct iomem_region *region = iomem_regions; -- cgit v1.2.3 From 60678bbc76685bea47043e61981b8fc5cffc10da Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Sat, 10 Feb 2007 01:44:10 -0800 Subject: [PATCH] uml: mem.c and physmem.c formatting fixes Fix a bunch of style violations in mem.c and physmem.c Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/kernel/mem.c | 77 +++++++++++++++++++++--------------------------- arch/um/kernel/physmem.c | 57 +++++++++++++++-------------------- 2 files changed, 57 insertions(+), 77 deletions(-) (limited to 'arch') diff --git a/arch/um/kernel/mem.c b/arch/um/kernel/mem.c index fb11992f0b8a..d1480ff0f2a6 100644 --- a/arch/um/kernel/mem.c +++ b/arch/um/kernel/mem.c @@ -65,8 +65,8 @@ void mem_init(void) { max_low_pfn = (high_physmem - uml_physmem) >> PAGE_SHIFT; - /* clear the zero-page */ - memset((void *) empty_zero_page, 0, PAGE_SIZE); + /* clear the zero-page */ + memset((void *) empty_zero_page, 0, PAGE_SIZE); /* Map in the area just after the brk now that kmalloc is about * to be turned on. @@ -253,8 +253,10 @@ struct page *arch_validate(struct page *page, gfp_t mask, int order) int i; again: - if(page == NULL) return(page); - if(PageHighMem(page)) return(page); + if(page == NULL) + return page; + if(PageHighMem(page)) + return page; addr = (unsigned long) page_address(page); for(i = 0; i < (1 << order); i++){ @@ -263,13 +265,15 @@ struct page *arch_validate(struct page *page, gfp_t mask, int order) sizeof(zero), ¤t->thread.fault_addr, ¤t->thread.fault_catcher)){ - if(!(mask & __GFP_WAIT)) return(NULL); + if(!(mask & __GFP_WAIT)) + return NULL; else break; } addr += PAGE_SIZE; } - if(i == (1 << order)) return(page); + if(i == (1 << order)) + return page; page = alloc_pages(mask, order); goto again; } @@ -283,7 +287,6 @@ void free_initmem(void) } #ifdef CONFIG_BLK_DEV_INITRD - void free_initrd_mem(unsigned long start, unsigned long end) { if (start < end) @@ -296,37 +299,36 @@ void free_initrd_mem(unsigned long start, unsigned long end) totalram_pages++; } } - #endif void show_mem(void) { - int pfn, total = 0, reserved = 0; - int shared = 0, cached = 0; - int highmem = 0; + int pfn, total = 0, reserved = 0; + int shared = 0, cached = 0; + int highmem = 0; struct page *page; - printk("Mem-info:\n"); - show_free_areas(); - printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10)); - pfn = max_mapnr; - while(pfn-- > 0) { + printk("Mem-info:\n"); + show_free_areas(); + printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10)); + pfn = max_mapnr; + while(pfn-- > 0) { page = pfn_to_page(pfn); - total++; - if(PageHighMem(page)) - highmem++; - if(PageReserved(page)) - reserved++; - else if(PageSwapCache(page)) - cached++; - else if(page_count(page)) - shared += page_count(page) - 1; - } - printk("%d pages of RAM\n", total); - printk("%d pages of HIGHMEM\n", highmem); - printk("%d reserved pages\n", reserved); - printk("%d pages shared\n", shared); - printk("%d pages swap cached\n", cached); + total++; + if(PageHighMem(page)) + highmem++; + if(PageReserved(page)) + reserved++; + else if(PageSwapCache(page)) + cached++; + else if(page_count(page)) + shared += page_count(page) - 1; + } + printk("%d pages of RAM\n", total); + printk("%d pages of HIGHMEM\n", highmem); + printk("%d reserved pages\n", reserved); + printk("%d pages shared\n", shared); + printk("%d pages swap cached\n", cached); } /* @@ -362,18 +364,7 @@ pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address) struct page *pte_alloc_one(struct mm_struct *mm, unsigned long address) { struct page *pte; - + pte = alloc_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO); return pte; } - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/kernel/physmem.c b/arch/um/kernel/physmem.c index 22d3cf359669..638f3b5f6094 100644 --- a/arch/um/kernel/physmem.c +++ b/arch/um/kernel/physmem.c @@ -40,7 +40,7 @@ static struct rb_node **find_rb(void *virt) while(*n != NULL){ d = rb_entry(*n, struct phys_desc, rb); if(d->virt == virt) - return(n); + return n; if(d->virt > virt) n = &(*n)->rb_left; @@ -48,7 +48,7 @@ static struct rb_node **find_rb(void *virt) n = &(*n)->rb_right; } - return(n); + return n; } static struct phys_desc *find_phys_mapping(void *virt) @@ -56,9 +56,9 @@ static struct phys_desc *find_phys_mapping(void *virt) struct rb_node **n = find_rb(virt); if(*n == NULL) - return(NULL); + return NULL; - return(rb_entry(*n, struct phys_desc, rb)); + return rb_entry(*n, struct phys_desc, rb); } static void insert_phys_mapping(struct phys_desc *desc) @@ -89,10 +89,10 @@ static struct desc_mapping *find_mapping(int fd) list_for_each(ele, &descriptor_mappings){ desc = list_entry(ele, struct desc_mapping, list); if(desc->fd == fd) - return(desc); + return desc; } - return(NULL); + return NULL; } static struct desc_mapping *descriptor_mapping(int fd) @@ -101,11 +101,11 @@ static struct desc_mapping *descriptor_mapping(int fd) desc = find_mapping(fd); if(desc != NULL) - return(desc); + return desc; desc = kmalloc(sizeof(*desc), GFP_ATOMIC); if(desc == NULL) - return(NULL); + return NULL; *desc = ((struct desc_mapping) { .fd = fd, @@ -113,7 +113,7 @@ static struct desc_mapping *descriptor_mapping(int fd) .pages = LIST_HEAD_INIT(desc->pages) }); list_add(&desc->list, &descriptor_mappings); - return(desc); + return desc; } int physmem_subst_mapping(void *virt, int fd, __u64 offset, int w) @@ -125,11 +125,11 @@ int physmem_subst_mapping(void *virt, int fd, __u64 offset, int w) fd_maps = descriptor_mapping(fd); if(fd_maps == NULL) - return(-ENOMEM); + return -ENOMEM; phys = __pa(virt); desc = find_phys_mapping(virt); - if(desc != NULL) + if(desc != NULL) panic("Address 0x%p is already substituted\n", virt); err = -ENOMEM; @@ -155,7 +155,7 @@ int physmem_subst_mapping(void *virt, int fd, __u64 offset, int w) rb_erase(&desc->rb, &phys_mappings); kfree(desc); out: - return(err); + return err; } static int physmem_fd = -1; @@ -182,10 +182,10 @@ int physmem_remove_mapping(void *virt) virt = (void *) ((unsigned long) virt & PAGE_MASK); desc = find_phys_mapping(virt); if(desc == NULL) - return(0); + return 0; remove_mapping(desc); - return(1); + return 1; } void physmem_forget_descriptor(int fd) @@ -239,9 +239,9 @@ void arch_free_page(struct page *page, int order) int is_remapped(void *virt) { - struct phys_desc *desc = find_phys_mapping(virt); + struct phys_desc *desc = find_phys_mapping(virt); - return(desc != NULL); + return desc != NULL; } /* Changed during early boot */ @@ -276,7 +276,7 @@ int init_maps(unsigned long physmem, unsigned long iomem, unsigned long highmem) else map = alloc_bootmem_low_pages(total_len); if(map == NULL) - return(-ENOMEM); + return -ENOMEM; for(i = 0; i < total_pages; i++){ p = &map[i]; @@ -286,7 +286,7 @@ int init_maps(unsigned long physmem, unsigned long iomem, unsigned long highmem) } max_mapnr = total_pages; - return(0); + return 0; } /* Changed during early boot */ @@ -296,7 +296,7 @@ unsigned long get_kmem_end(void) { if(kmem_top == 0) kmem_top = CHOOSE_MODE(kmem_end_tt, kmem_end_skas); - return(kmem_top); + return kmem_top; } void map_memory(unsigned long virt, unsigned long phys, unsigned long len, @@ -379,7 +379,7 @@ int phys_mapping(unsigned long phys, __u64 *offset_out) *offset_out = phys - iomem_size; } - return(fd); + return fd; } static int __init uml_mem_setup(char *line, int *add) @@ -422,13 +422,13 @@ unsigned long find_iomem(char *driver, unsigned long *len_out) while(region != NULL){ if(!strcmp(region->driver, driver)){ *len_out = region->size; - return(region->virt); + return region->virt; } region = region->next; } - return(0); + return 0; } int setup_iomem(void) @@ -452,18 +452,7 @@ int setup_iomem(void) region = region->next; } - return(0); + return 0; } __initcall(setup_iomem); - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ -- cgit v1.2.3 From c0961c1804c46bf5bb253e1bd6bc93e4627b79a1 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Sat, 10 Feb 2007 01:44:11 -0800 Subject: [PATCH] uml: initialize a list head We need to initialize lists properly. Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/drivers/stdio_console.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/um/drivers/stdio_console.c b/arch/um/drivers/stdio_console.c index 8dccdd193d94..7ff0b0fc37e7 100644 --- a/arch/um/drivers/stdio_console.c +++ b/arch/um/drivers/stdio_console.c @@ -69,6 +69,7 @@ static struct line_driver driver = { .write_irq = CONSOLE_WRITE_IRQ, .write_irq_name = "console-write", .mc = { + .list = LIST_HEAD_INIT(driver.mc.list), .name = "con", .config = con_config, .get_config = con_get_config, -- cgit v1.2.3 From 490ba1714b31a131cdc6318231aa227d19bf0761 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Sat, 10 Feb 2007 01:44:12 -0800 Subject: [PATCH] uml: make time data per-cpu prev_nsecs and delta need to be arrays, and indexed by CPU number. Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/kernel/time.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/um/kernel/time.c b/arch/um/kernel/time.c index 2e354b3ca060..b1f8b0752419 100644 --- a/arch/um/kernel/time.c +++ b/arch/um/kernel/time.c @@ -35,31 +35,31 @@ unsigned long long sched_clock(void) return (unsigned long long)jiffies_64 * (1000000000 / HZ); } -static unsigned long long prev_nsecs; +static unsigned long long prev_nsecs[NR_CPUS]; #ifdef CONFIG_UML_REAL_TIME_CLOCK -static long long delta; /* Deviation per interval */ +static long long delta[NR_CPUS]; /* Deviation per interval */ #endif void timer_irq(union uml_pt_regs *regs) { unsigned long long ticks = 0; - #ifdef CONFIG_UML_REAL_TIME_CLOCK - if(prev_nsecs){ + int c = cpu(); + if(prev_nsecs[c]){ /* We've had 1 tick */ unsigned long long nsecs = os_nsecs(); - delta += nsecs - prev_nsecs; - prev_nsecs = nsecs; + delta[c] += nsecs - prev_nsecs[c]; + prev_nsecs[c] = nsecs; /* Protect against the host clock being set backwards */ - if(delta < 0) - delta = 0; + if(delta[c] < 0) + delta[c] = 0; - ticks += (delta * HZ) / BILLION; - delta -= (ticks * BILLION) / HZ; + ticks += (delta[c] * HZ) / BILLION; + delta[c] -= (ticks * BILLION) / HZ; } - else prev_nsecs = os_nsecs(); + else prev_nsecs[c] = os_nsecs(); #else ticks = 1; #endif @@ -69,8 +69,8 @@ void timer_irq(union uml_pt_regs *regs) } } +/* Protects local_offset */ static DEFINE_SPINLOCK(timer_spinlock); - static unsigned long long local_offset = 0; static inline unsigned long long get_time(void) -- cgit v1.2.3 From b42e1eacc1f245581a2f7580ec1082ff4d6c65cd Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Sat, 10 Feb 2007 01:44:12 -0800 Subject: [PATCH] uml: delete unused file It turns out that resource.c isn't needed. Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/kernel/Makefile | 2 +- arch/um/kernel/resource.c | 23 ----------------------- 2 files changed, 1 insertion(+), 24 deletions(-) delete mode 100644 arch/um/kernel/resource.c (limited to 'arch') diff --git a/arch/um/kernel/Makefile b/arch/um/kernel/Makefile index 6fa63a2a89e3..c5cf4a0827b0 100644 --- a/arch/um/kernel/Makefile +++ b/arch/um/kernel/Makefile @@ -7,7 +7,7 @@ extra-y := vmlinux.lds clean-files := obj-y = config.o exec.o exitcode.o init_task.o irq.o ksyms.o mem.o \ - physmem.o process.o ptrace.o reboot.o resource.o sigio.o \ + physmem.o process.o ptrace.o reboot.o sigio.o \ signal.o smp.o syscall.o sysrq.o time.o tlb.o trap.o uaccess.o \ um_arch.o umid.o diff --git a/arch/um/kernel/resource.c b/arch/um/kernel/resource.c deleted file mode 100644 index 32188e12e8af..000000000000 --- a/arch/um/kernel/resource.c +++ /dev/null @@ -1,23 +0,0 @@ -/* - * Copyright (C) 2000 Jeff Dike (jdike@karaya.com) - * Licensed under the GPL - */ - -#include "linux/pci.h" - -unsigned long resource_fixup(struct pci_dev * dev, struct resource * res, - unsigned long start, unsigned long size) -{ - return start; -} - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ -- cgit v1.2.3 From 6d1b18b16fc917e5c9af568a53c7e37923821d70 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Sat, 10 Feb 2007 01:44:13 -0800 Subject: [PATCH] uml: remove unused variable and function syscall_index and next_syscall_index turn out not to be used. Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/include/kern_util.h | 1 - arch/um/kernel/syscall.c | 16 ---------------- 2 files changed, 17 deletions(-) (limited to 'arch') diff --git a/arch/um/include/kern_util.h b/arch/um/include/kern_util.h index cec9fcc57bf5..3368ef974379 100644 --- a/arch/um/include/kern_util.h +++ b/arch/um/include/kern_util.h @@ -61,7 +61,6 @@ extern int set_signals(int enable); extern void force_sigbus(void); extern int pid_to_processor_id(int pid); extern void deliver_signals(void *t); -extern int next_syscall_index(int max); extern int next_trap_index(int max); extern void default_idle(void); extern void finish_fork(void); diff --git a/arch/um/kernel/syscall.c b/arch/um/kernel/syscall.c index f5ed8624648b..2828c5283227 100644 --- a/arch/um/kernel/syscall.c +++ b/arch/um/kernel/syscall.c @@ -149,22 +149,6 @@ long sys_olduname(struct oldold_utsname __user * name) return error; } -DEFINE_SPINLOCK(syscall_lock); - -static int syscall_index = 0; - -int next_syscall_index(int limit) -{ - int ret; - - spin_lock(&syscall_lock); - ret = syscall_index; - if(++syscall_index == limit) - syscall_index = 0; - spin_unlock(&syscall_lock); - return(ret); -} - int kernel_execve(const char *filename, char *const argv[], char *const envp[]) { mm_segment_t fs; -- cgit v1.2.3 From 27aa6ef3c0e8220b27b0a8d2d0bae7cd0a6d2f78 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Sat, 10 Feb 2007 01:44:14 -0800 Subject: [PATCH] uml: make signal handlers static A bunch of the signal handlers can be made static. Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/include/kern_util.h | 4 ---- arch/um/kernel/trap.c | 28 ++++++++++++++-------------- 2 files changed, 14 insertions(+), 18 deletions(-) (limited to 'arch') diff --git a/arch/um/include/kern_util.h b/arch/um/include/kern_util.h index 3368ef974379..173af029d12b 100644 --- a/arch/um/include/kern_util.h +++ b/arch/um/include/kern_util.h @@ -87,7 +87,6 @@ extern void timer_irq(union uml_pt_regs *regs); extern void unprotect_stack(unsigned long stack); extern void do_uml_exitcalls(void); extern int attach_debugger(int idle_pid, int pid, int stop); -extern void bad_segv(struct faultinfo fi, unsigned long ip); extern int config_gdb(char *str); extern int remove_gdb(void); extern char *uml_strdup(char *string); @@ -103,8 +102,6 @@ extern int clear_user_proc(void *buf, int size); extern int copy_to_user_proc(void *to, void *from, int size); extern int copy_from_user_proc(void *to, void *from, int size); extern int strlen_user_proc(char *str); -extern void bus_handler(int sig, union uml_pt_regs *regs); -extern void winch(int sig, union uml_pt_regs *regs); extern long execute_syscall(void *r); extern int smp_sigio_handler(void); extern void *get_current(void); @@ -119,7 +116,6 @@ extern void time_init_kern(void); /* Are we disallowed to sleep? Used to choose between GFP_KERNEL and GFP_ATOMIC. */ extern int __cant_sleep(void); -extern void segv_handler(int sig, union uml_pt_regs *regs); extern void sigio_handler(int sig, union uml_pt_regs *regs); #endif diff --git a/arch/um/kernel/trap.c b/arch/um/kernel/trap.c index b5f124a2f6ae..26f15c458574 100644 --- a/arch/um/kernel/trap.c +++ b/arch/um/kernel/trap.c @@ -128,7 +128,18 @@ out_of_memory: goto out; } -void segv_handler(int sig, union uml_pt_regs *regs) +static void bad_segv(struct faultinfo fi, unsigned long ip) +{ + struct siginfo si; + + si.si_signo = SIGSEGV; + si.si_code = SEGV_ACCERR; + si.si_addr = (void __user *) FAULT_ADDRESS(fi); + current->thread.arch.faultinfo = fi; + force_sig_info(SIGSEGV, &si, current); +} + +static void segv_handler(int sig, union uml_pt_regs *regs) { struct faultinfo * fi = UPT_FAULTINFO(regs); @@ -205,17 +216,6 @@ unsigned long segv(struct faultinfo fi, unsigned long ip, int is_user, void *sc) return(0); } -void bad_segv(struct faultinfo fi, unsigned long ip) -{ - struct siginfo si; - - si.si_signo = SIGSEGV; - si.si_code = SEGV_ACCERR; - si.si_addr = (void __user *) FAULT_ADDRESS(fi); - current->thread.arch.faultinfo = fi; - force_sig_info(SIGSEGV, &si, current); -} - void relay_signal(int sig, union uml_pt_regs *regs) { if(arch_handle_signal(sig, regs)) @@ -232,14 +232,14 @@ void relay_signal(int sig, union uml_pt_regs *regs) force_sig(sig, current); } -void bus_handler(int sig, union uml_pt_regs *regs) +static void bus_handler(int sig, union uml_pt_regs *regs) { if(current->thread.fault_catcher != NULL) do_longjmp(current->thread.fault_catcher, 1); else relay_signal(sig, regs); } -void winch(int sig, union uml_pt_regs *regs) +static void winch(int sig, union uml_pt_regs *regs) { do_IRQ(WINCH_IRQ, regs); } -- cgit v1.2.3 From 0d0d0ed426f8f5ba6b74ba30fcdcd27c54ce4724 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Sat, 10 Feb 2007 01:44:15 -0800 Subject: [PATCH] uml: const a variable kstack_depth_to_print can be made const. Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/kernel/sysrq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/um/kernel/sysrq.c b/arch/um/kernel/sysrq.c index 239c98054dec..f9e02b31a97a 100644 --- a/arch/um/kernel/sysrq.c +++ b/arch/um/kernel/sysrq.c @@ -50,7 +50,7 @@ void dump_stack(void) EXPORT_SYMBOL(dump_stack); /*Stolen from arch/i386/kernel/traps.c */ -static int kstack_depth_to_print = 24; +static const int kstack_depth_to_print = 24; /* This recently started being used in arch-independent code too, as in * kernel/sched.c.*/ -- cgit v1.2.3 From 92b4202f38cf630350a9e1eb0ab23ca4fc5b687b Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Sat, 10 Feb 2007 01:44:15 -0800 Subject: [PATCH] uml: remove code controlled by non-existent config option CONFIG_HOST_TASK_SIZE doesn't exist any more. Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/kernel/skas/mem.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/um/kernel/skas/mem.c b/arch/um/kernel/skas/mem.c index 0d2cce621134..7c18dfcd7d8e 100644 --- a/arch/um/kernel/skas/mem.c +++ b/arch/um/kernel/skas/mem.c @@ -14,13 +14,9 @@ unsigned long set_task_sizes_skas(unsigned long *task_size_out) unsigned long host_task_size = ROUND_4M((unsigned long) &host_task_size); -#ifdef CONFIG_HOST_TASK_SIZE - *host_size_out = ROUND_4M(CONFIG_HOST_TASK_SIZE); - *task_size_out = CONFIG_HOST_TASK_SIZE; -#else if (!skas_needs_stub) *task_size_out = host_task_size; else *task_size_out = CONFIG_STUB_START & PGDIR_MASK; -#endif + return host_task_size; } -- cgit v1.2.3 From 62f96cb01e8de7a5daee472e540f726db2801499 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Sat, 10 Feb 2007 01:44:16 -0800 Subject: [PATCH] uml: add per-device queues and locks to ubd driver Replace global queue and lock with per-device queues and locks. Mostly a straightforward replacement of ubd_io_lock with dev->lock and ubd_queue with dev->queue. Complications - There was no way to get a request struct (and queue) from the structure sent to the io_thread, so a pointer to the request was added. This is needed in ubd_handler in order to kick do_ubd_request to process another request. Queue initialization is moved from ubd_init to ubd_add. Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Cc: Jens Axboe Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/drivers/ubd_kern.c | 70 ++++++++++++++++++++++++++-------------------- 1 file changed, 40 insertions(+), 30 deletions(-) (limited to 'arch') diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c index c1d40fb738e6..d863482cdd27 100644 --- a/arch/um/drivers/ubd_kern.c +++ b/arch/um/drivers/ubd_kern.c @@ -56,6 +56,7 @@ enum ubd_req { UBD_READ, UBD_WRITE }; struct io_thread_req { + struct request *req; enum ubd_req op; int fds[2]; unsigned long offsets[2]; @@ -106,10 +107,6 @@ static inline void ubd_set_bit(__u64 bit, unsigned char *data) #define DRIVER_NAME "uml-blkdev" -/* Can be taken in interrupt context, and is passed to the block layer to lock - * the request queue. Kernel side code knows that. */ -static DEFINE_SPINLOCK(ubd_io_lock); - static DEFINE_MUTEX(ubd_lock); /* XXX - this made sense in 2.4 days, now it's only used as a boolean, and @@ -132,9 +129,6 @@ static struct block_device_operations ubd_blops = { .getgeo = ubd_getgeo, }; -/* Protected by the queue_lock */ -static request_queue_t *ubd_queue; - /* Protected by ubd_lock */ static int fake_major = MAJOR_NR; @@ -178,6 +172,8 @@ struct ubd { unsigned no_cow:1; struct cow cow; struct platform_device pdev; + struct request_queue *queue; + spinlock_t lock; }; #define DEFAULT_COW { \ @@ -198,6 +194,7 @@ struct ubd { .no_cow = 0, \ .shared = 0, \ .cow = DEFAULT_COW, \ + .lock = SPIN_LOCK_UNLOCKED, \ } struct ubd ubd_devs[MAX_DEV] = { [ 0 ... MAX_DEV - 1 ] = DEFAULT_UBD }; @@ -504,17 +501,20 @@ static void __ubd_finish(struct request *req, int error) * spin_lock_irq()/spin_lock_irqsave() */ static inline void ubd_finish(struct request *req, int error) { - spin_lock(&ubd_io_lock); + struct ubd *dev = req->rq_disk->private_data; + + spin_lock(&dev->lock); __ubd_finish(req, error); - spin_unlock(&ubd_io_lock); + spin_unlock(&dev->lock); } /* XXX - move this inside ubd_intr. */ -/* Called without ubd_io_lock held, and only in interrupt context. */ +/* Called without dev->lock held, and only in interrupt context. */ static void ubd_handler(void) { struct io_thread_req req; - struct request *rq = elv_next_request(ubd_queue); + struct request *rq; + struct ubd *dev; int n; do_ubd = 0; @@ -523,17 +523,17 @@ static void ubd_handler(void) if(n != sizeof(req)){ printk(KERN_ERR "Pid %d - spurious interrupt in ubd_handler, " "err = %d\n", os_getpid(), -n); - spin_lock(&ubd_io_lock); - end_request(rq, 0); - spin_unlock(&ubd_io_lock); return; } + rq = req.req; + dev = rq->rq_disk->private_data; + ubd_finish(rq, req.error); - reactivate_fd(thread_fd, UBD_IRQ); - spin_lock(&ubd_io_lock); - do_ubd_request(ubd_queue); - spin_unlock(&ubd_io_lock); + reactivate_fd(thread_fd, UBD_IRQ); + spin_lock(&dev->lock); + do_ubd_request(dev->queue); + spin_unlock(&dev->lock); } static irqreturn_t ubd_intr(int irq, void *dev) @@ -664,7 +664,7 @@ static int ubd_disk_register(int major, u64 size, int unit, } disk->private_data = &ubd_devs[unit]; - disk->queue = ubd_queue; + disk->queue = ubd_devs[unit].queue; add_disk(disk); *disk_out = disk; @@ -689,13 +689,23 @@ static int ubd_add(int n, char **error_out) ubd_dev->size = ROUND_BLOCK(ubd_dev->size); - err = ubd_disk_register(MAJOR_NR, ubd_dev->size, n, &ubd_gendisk[n]); - if(err) + err = -ENOMEM; + ubd_dev->queue = blk_init_queue(do_ubd_request, &ubd_dev->lock); + if (ubd_dev->queue == NULL) { + *error_out = "Failed to initialize device queue"; goto out; + } + ubd_dev->queue->queuedata = ubd_dev; + + err = ubd_disk_register(MAJOR_NR, ubd_dev->size, n, &ubd_gendisk[n]); + if(err){ + *error_out = "Failed to register device"; + goto out_cleanup; + } if(fake_major != MAJOR_NR) ubd_disk_register(fake_major, ubd_dev->size, n, - &fake_gendisk[n]); + &fake_gendisk[n]); /* perhaps this should also be under the "if (fake_major)" above */ /* using the fake_disk->disk_name and also the fakehd_set name */ @@ -705,6 +715,10 @@ static int ubd_add(int n, char **error_out) err = 0; out: return err; + +out_cleanup: + blk_cleanup_queue(ubd_dev->queue); + goto out; } static int ubd_config(char *str, char **error_out) @@ -816,6 +830,7 @@ static int ubd_remove(int n, char **error_out) fake_gendisk[n] = NULL; } + blk_cleanup_queue(ubd_dev->queue); platform_device_unregister(&ubd_dev->pdev); *ubd_dev = ((struct ubd) DEFAULT_UBD); err = 0; @@ -869,12 +884,6 @@ static int __init ubd_init(void) if (register_blkdev(MAJOR_NR, "ubd")) return -1; - ubd_queue = blk_init_queue(do_ubd_request, &ubd_io_lock); - if (!ubd_queue) { - unregister_blkdev(MAJOR_NR, "ubd"); - return -1; - } - if (fake_major != MAJOR_NR) { char name[sizeof("ubd_nnn\0")]; @@ -1020,7 +1029,7 @@ static void cowify_req(struct io_thread_req *req, unsigned long *bitmap, req->bitmap_words, bitmap_len); } -/* Called with ubd_io_lock held */ +/* Called with dev->lock held */ static int prepare_request(struct request *req, struct io_thread_req *io_req) { struct gendisk *disk = req->rq_disk; @@ -1039,6 +1048,7 @@ static int prepare_request(struct request *req, struct io_thread_req *io_req) offset = ((__u64) req->sector) << 9; len = req->current_nr_sectors << 9; + io_req->req = req; io_req->fds[0] = (ubd_dev->cow.file != NULL) ? ubd_dev->cow.fd : ubd_dev->fd; io_req->fds[1] = ubd_dev->fd; io_req->cow_offset = -1; @@ -1060,7 +1070,7 @@ static int prepare_request(struct request *req, struct io_thread_req *io_req) return(0); } -/* Called with ubd_io_lock held */ +/* Called with dev->lock held */ static void do_ubd_request(request_queue_t *q) { struct io_thread_req io_req; -- cgit v1.2.3 From b8831a1d2c78c03b8193ab3acf56664fa3457265 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Sat, 10 Feb 2007 01:44:17 -0800 Subject: [PATCH] uml: locking fixes in the ubd driver Some small locking and formatting fixes in the ubd driver. Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/drivers/ubd_kern.c | 35 +++++++++++++++-------------------- 1 file changed, 15 insertions(+), 20 deletions(-) (limited to 'arch') diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c index d863482cdd27..da0badcd7551 100644 --- a/arch/um/drivers/ubd_kern.c +++ b/arch/um/drivers/ubd_kern.c @@ -131,7 +131,6 @@ static struct block_device_operations ubd_blops = { /* Protected by ubd_lock */ static int fake_major = MAJOR_NR; - static struct gendisk *ubd_gendisk[MAX_DEV]; static struct gendisk *fake_gendisk[MAX_DEV]; @@ -142,10 +141,6 @@ static struct gendisk *fake_gendisk[MAX_DEV]; #define OPEN_FLAGS ((struct openflags) { .r = 1, .w = 1, .s = 0, .c = 0, \ .cl = 1 }) #endif - -/* Not protected - changed only in ubd_setup_common and then only to - * to enable O_SYNC. - */ static struct openflags global_openflags = OPEN_FLAGS; struct cow { @@ -197,6 +192,7 @@ struct ubd { .lock = SPIN_LOCK_UNLOCKED, \ } +/* Protected by ubd_lock */ struct ubd ubd_devs[MAX_DEV] = { [ 0 ... MAX_DEV - 1 ] = DEFAULT_UBD }; /* Only changed by fake_ide_setup which is a setup */ @@ -288,7 +284,7 @@ static int ubd_setup_common(char *str, int *index_out, char **error_out) struct ubd *ubd_dev; struct openflags flags = global_openflags; char *backing_file; - int n, err, i; + int n, err = 0, i; if(index_out) *index_out = -1; n = *str; @@ -299,15 +295,16 @@ static int ubd_setup_common(char *str, int *index_out, char **error_out) str++; if(!strcmp(str, "sync")){ global_openflags = of_sync(global_openflags); - return 0; + goto out1; } + + err = -EINVAL; major = simple_strtoul(str, &end, 0); if((*end != '\0') || (end == str)){ *error_out = "Didn't parse major number"; - return -EINVAL; + goto out1; } - err = -EINVAL; mutex_lock(&ubd_lock); if(fake_major != MAJOR_NR){ *error_out = "Can't assign a fake major twice"; @@ -473,12 +470,6 @@ static void do_ubd_request(request_queue_t * q); /* Only changed by ubd_init, which is an initcall. */ int thread_fd = -1; -/* Changed by ubd_handler, which is serialized because interrupts only - * happen on CPU 0. - * XXX: currently unused. - */ -static int intr_count = 0; - /* call ubd_finish if you need to serialize */ static void __ubd_finish(struct request *req, int error) { @@ -518,7 +509,6 @@ static void ubd_handler(void) int n; do_ubd = 0; - intr_count++; n = os_read_file(thread_fd, &req, sizeof(req)); if(n != sizeof(req)){ printk(KERN_ERR "Pid %d - spurious interrupt in ubd_handler, " @@ -637,8 +627,7 @@ static int ubd_open_dev(struct ubd *ubd_dev) } static int ubd_disk_register(int major, u64 size, int unit, - struct gendisk **disk_out) - + struct gendisk **disk_out) { struct gendisk *disk; @@ -840,7 +829,7 @@ out: } /* All these are called by mconsole in process context and without - * ubd-specific locks. + * ubd-specific locks. The structure itself is const except for .list. */ static struct mc_device ubd_mc = { .list = LIST_HEAD_INIT(ubd_mc.list), @@ -863,13 +852,17 @@ static int __init ubd0_init(void) { struct ubd *ubd_dev = &ubd_devs[0]; + mutex_lock(&ubd_lock); if(ubd_dev->file == NULL) ubd_dev->file = "root_fs"; + mutex_unlock(&ubd_lock); + return(0); } __initcall(ubd0_init); +/* Used in ubd_init, which is an initcall */ static struct platform_driver ubd_driver = { .driver = { .name = DRIVER_NAME, @@ -892,12 +885,14 @@ static int __init ubd_init(void) return -1; } platform_driver_register(&ubd_driver); + mutex_lock(&ubd_lock); for (i = 0; i < MAX_DEV; i++){ err = ubd_add(i, &error); if(err) printk(KERN_ERR "Failed to initialize ubd device %d :" "%s\n", i, error); } + mutex_unlock(&ubd_lock); return 0; } @@ -1129,7 +1124,7 @@ static int ubd_ioctl(struct inode * inode, struct file * file, sizeof(ubd_id))) return(-EFAULT); return(0); - + case CDROMVOLREAD: if(copy_from_user(&volume, (char __user *) arg, sizeof(volume))) return(-EFAULT); -- cgit v1.2.3 From 6bf79482f3288e19697d08c456b0bd6b1755d467 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Sat, 10 Feb 2007 01:44:18 -0800 Subject: [PATCH] uml: locking comments in memory and tempfile code Locking comments and emacs comment removal in the low-level memory and temp file code. Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/include/tempfile.h | 10 ---------- arch/um/kernel/mem.c | 3 ++- arch/um/os-Linux/mem.c | 7 +++++++ 3 files changed, 9 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/um/include/tempfile.h b/arch/um/include/tempfile.h index e36d9e0f5105..d441eac936b9 100644 --- a/arch/um/include/tempfile.h +++ b/arch/um/include/tempfile.h @@ -9,13 +9,3 @@ extern int make_tempfile(const char *template, char **tempname, int do_unlink); #endif -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/kernel/mem.c b/arch/um/kernel/mem.c index d1480ff0f2a6..e85d65deea0d 100644 --- a/arch/um/kernel/mem.c +++ b/arch/um/kernel/mem.c @@ -24,8 +24,9 @@ #include "init.h" #include "kern_constants.h" -/* Changed during early boot */ +/* allocated in paging_init, zeroed in mem_init, and unchanged thereafter */ unsigned long *empty_zero_page = NULL; +/* allocated in paging_init and unchanged thereafter */ unsigned long *empty_bad_page = NULL; pgd_t swapper_pg_dir[PTRS_PER_PGD]; unsigned long long highmem; diff --git a/arch/um/os-Linux/mem.c b/arch/um/os-Linux/mem.c index 4203681e508d..82b874580f63 100644 --- a/arch/um/os-Linux/mem.c +++ b/arch/um/os-Linux/mem.c @@ -20,7 +20,13 @@ #include +/* Modified by which_tmpdir, which is called during early boot */ static char *default_tmpdir = "/tmp"; + +/* + * Modified when creating the physical memory file and when checking + * the tmp filesystem for usability, both happening during early boot. + */ static char *tempdir = NULL; static void __init find_tempdir(void) @@ -83,6 +89,7 @@ static int next(int fd, char *buf, int size, char c) return 1; } +/* which_tmpdir is called only during early boot */ static int checked_tmpdir = 0; /* Look for a tmpfs mounted at /dev/shm. I couldn't find a cleaner -- cgit v1.2.3 From 7242a4005d1c496bc1140d56a0d898cde1b3e3f6 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Sat, 10 Feb 2007 01:44:19 -0800 Subject: [PATCH] uml: locking comments in startup code Add a couple of comments about some non-locked data. Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/os-Linux/start_up.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/um/os-Linux/start_up.c b/arch/um/os-Linux/start_up.c index 7fe92680c7dd..5d3bff430d96 100644 --- a/arch/um/os-Linux/start_up.c +++ b/arch/um/os-Linux/start_up.c @@ -133,6 +133,7 @@ static int stop_ptraced_child(int pid, void *stack, int exitcode, return ret; } +/* Changed only during early boot */ int ptrace_faultinfo = 1; int ptrace_ldt = 1; int proc_mm = 1; @@ -160,6 +161,7 @@ __uml_setup("mode=skas0", mode_skas0_cmd_param, " specify mode=tt. Note that this was recently added - on \n" " older kernels you must use simply \"skas0\".\n\n"); +/* Changed only during early boot */ static int force_sysemu_disabled = 0; static int __init nosysemu_cmd_param(char *str, int* add) -- cgit v1.2.3 From 9eae9b132cd2cebf98cc45550049d421302b9aba Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Sat, 10 Feb 2007 01:44:20 -0800 Subject: [PATCH] uml: style fixes in startup code Some style fixes in startup.c. Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/os-Linux/start_up.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/um/os-Linux/start_up.c b/arch/um/os-Linux/start_up.c index 5d3bff430d96..537084fd834f 100644 --- a/arch/um/os-Linux/start_up.c +++ b/arch/um/os-Linux/start_up.c @@ -95,7 +95,7 @@ static int start_ptraced_child(void **stack_out) status); *stack_out = stack; - return(pid); + return pid; } /* When testing for SYSEMU support, if it is one of the broken versions, we @@ -182,7 +182,7 @@ __uml_setup("nosysemu", nosysemu_cmd_param, static void __init check_sysemu(void) { void *stack; - int pid, n, status, count=0; + int pid, n, status, count=0; printf("Checking syscall emulation patch for ptrace..."); sysemu_supported = 0; @@ -418,7 +418,7 @@ static inline void check_skas3_proc_mm(void) { printf(" - /proc/mm..."); if (os_access("/proc/mm", OS_ACC_W_OK) < 0) { - proc_mm = 0; + proc_mm = 0; printf("not found\n"); } else { @@ -445,7 +445,7 @@ int can_do_skas(void) #else int can_do_skas(void) { - return(0); + return 0; } #endif @@ -493,11 +493,11 @@ int __init parse_iomem(char *str, int *add) iomem_regions = new; iomem_size += new->size + UM_KERN_PAGE_SIZE; - return(0); + return 0; out_close: os_close_file(fd); out: - return(1); + return 1; } -- cgit v1.2.3 From 73c8f4441f07dd3b9d198ec0e97ce83138a6224c Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Sat, 10 Feb 2007 01:44:20 -0800 Subject: [PATCH] uml: libc-dependent code should call libc directly We shouldn't be using the os wrappers from os code - we can use libc directly. This patch replaces wrapper calls with libc calls. It turns out that os_sigio_async had only one caller, which was in startup.c, so that function is moved there and its name changed. Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/include/os.h | 1 - arch/um/os-Linux/file.c | 19 ------------------- arch/um/os-Linux/start_up.c | 39 ++++++++++++++++++++++++++++----------- 3 files changed, 28 insertions(+), 31 deletions(-) (limited to 'arch') diff --git a/arch/um/include/os.h b/arch/um/include/os.h index 13a86bd383d3..8f602667296d 100644 --- a/arch/um/include/os.h +++ b/arch/um/include/os.h @@ -137,7 +137,6 @@ extern int os_new_tty_pgrp(int fd, int pid); extern int os_get_ifname(int fd, char *namebuf); extern int os_set_slip(int fd); extern int os_set_owner(int fd, int pid); -extern int os_sigio_async(int master, int slave); extern int os_mode_fd(int fd, int mode); extern int os_seek_file(int fd, __u64 offset); diff --git a/arch/um/os-Linux/file.c b/arch/um/os-Linux/file.c index 189fa677085a..371b4335f46d 100644 --- a/arch/um/os-Linux/file.c +++ b/arch/um/os-Linux/file.c @@ -162,25 +162,6 @@ int os_set_owner(int fd, int pid) return 0; } -/* FIXME? moved wholesale from sigio_user.c to get fcntls out of that file */ -int os_sigio_async(int master, int slave) -{ - int flags; - - flags = fcntl(master, F_GETFL); - if(flags < 0) - return -errno; - - if((fcntl(master, F_SETFL, flags | O_NONBLOCK | O_ASYNC) < 0) || - (fcntl(master, F_SETOWN, os_getpid()) < 0)) - return -errno; - - if((fcntl(slave, F_SETFL, flags | O_NONBLOCK) < 0)) - return -errno; - - return(0); -} - int os_mode_fd(int fd, int mode) { int err; diff --git a/arch/um/os-Linux/start_up.c b/arch/um/os-Linux/start_up.c index 537084fd834f..735d035a7f33 100644 --- a/arch/um/os-Linux/start_up.c +++ b/arch/um/os-Linux/start_up.c @@ -54,7 +54,7 @@ static int ptrace_child(void *arg) perror("ptrace"); os_kill_process(pid, 0); } - os_stop_process(pid); + kill(pid, SIGSTOP); /*This syscall will be intercepted by the parent. Don't call more than * once, please.*/ @@ -417,7 +417,7 @@ static inline void check_skas3_ptrace_ldt(void) static inline void check_skas3_proc_mm(void) { printf(" - /proc/mm..."); - if (os_access("/proc/mm", OS_ACC_W_OK) < 0) { + if (access("/proc/mm", W_OK) < 0) { proc_mm = 0; printf("not found\n"); } @@ -452,9 +452,9 @@ int can_do_skas(void) int __init parse_iomem(char *str, int *add) { struct iomem_region *new; - struct uml_stat buf; + struct stat64 buf; char *file, *driver; - int fd, err, size; + int fd, size; driver = str; file = strchr(str,','); @@ -464,15 +464,14 @@ int __init parse_iomem(char *str, int *add) } *file = '\0'; file++; - fd = os_open_file(file, of_rdwr(OPENFLAGS()), 0); + fd = open(file, O_RDWR, 0); if(fd < 0){ os_print_error(fd, "parse_iomem - Couldn't open io file"); goto out; } - err = os_stat_fd(fd, &buf); - if(err < 0){ - os_print_error(err, "parse_iomem - cannot stat_fd file"); + if(fstat64(fd, &buf) < 0){ + perror("parse_iomem - cannot stat_fd file"); goto out_close; } @@ -482,7 +481,7 @@ int __init parse_iomem(char *str, int *add) goto out_close; } - size = (buf.ust_size + UM_KERN_PAGE_SIZE) & ~(UM_KERN_PAGE_SIZE - 1); + size = (buf.st_size + UM_KERN_PAGE_SIZE) & ~(UM_KERN_PAGE_SIZE - 1); *new = ((struct iomem_region) { .next = iomem_regions, .driver = driver, @@ -495,7 +494,7 @@ int __init parse_iomem(char *str, int *add) return 0; out_close: - os_close_file(fd); + close(fd); out: return 1; } @@ -528,6 +527,24 @@ static void openpty_cb(void *arg) info->err = -errno; } +static int async_pty(int master, int slave) +{ + int flags; + + flags = fcntl(master, F_GETFL); + if(flags < 0) + return -errno; + + if((fcntl(master, F_SETFL, flags | O_NONBLOCK | O_ASYNC) < 0) || + (fcntl(master, F_SETOWN, os_getpid()) < 0)) + return -errno; + + if((fcntl(slave, F_SETFL, flags | O_NONBLOCK) < 0)) + return -errno; + + return(0); +} + static void __init check_one_sigio(void (*proc)(int, int)) { struct sigaction old, new; @@ -553,7 +570,7 @@ static void __init check_one_sigio(void (*proc)(int, int)) if (err < 0) panic("check_sigio : __raw failed, errno = %d\n", -err); - err = os_sigio_async(master, slave); + err = async_pty(master, slave); if(err < 0) panic("tty_fds : sigio_async failed, err = %d\n", -err); -- cgit v1.2.3 From 81999a01c786e26c2058968d76b595df60d2f8da Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Sat, 10 Feb 2007 01:44:21 -0800 Subject: [PATCH] uml: fix style violations Fix a bunch of style violations in mem.c. Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/os-Linux/mem.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/um/os-Linux/mem.c b/arch/um/os-Linux/mem.c index 82b874580f63..f1ea169db85e 100644 --- a/arch/um/os-Linux/mem.c +++ b/arch/um/os-Linux/mem.c @@ -35,7 +35,8 @@ static void __init find_tempdir(void) int i; char *dir = NULL; - if(tempdir != NULL) return; /* We've already been called */ + if(tempdir != NULL) /* We've already been called */ + return; for(i = 0; dirs[i]; i++){ dir = getenv(dirs[i]); if((dir != NULL) && (*dir != '\0')) @@ -193,7 +194,7 @@ int make_tempfile(const char *template, char **out_tempname, int do_unlink) } else { free(tempname); } - return(fd); + return fd; out: free(tempname); return -1; @@ -238,7 +239,7 @@ int create_tmp_file(unsigned long long len) exit(1); } - return(fd); + return fd; } int create_mem_file(unsigned long long len) @@ -252,7 +253,7 @@ int create_mem_file(unsigned long long len) errno = -err; perror("exec_close"); } - return(fd); + return fd; } -- cgit v1.2.3 From f2e62992a232544d612b7b95e932fbf3592944e1 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Sat, 10 Feb 2007 01:44:23 -0800 Subject: [PATCH] uml: IRQ handler tidying Tidying the irq code - make a variable static activate_fd can call kmalloc directly since it's now kernel code added a no-locking comment fixed a style violation Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/kernel/irq.c | 7 +++---- arch/um/os-Linux/irq.c | 6 +++++- 2 files changed, 8 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/um/kernel/irq.c b/arch/um/kernel/irq.c index 5c1e611f628d..50a288bb875a 100644 --- a/arch/um/kernel/irq.c +++ b/arch/um/kernel/irq.c @@ -79,7 +79,7 @@ skip: return 0; } -struct irq_fd *active_fds = NULL; +static struct irq_fd *active_fds = NULL; static struct irq_fd **last_irq_ptr = &active_fds; extern void free_irqs(void); @@ -124,8 +124,8 @@ int activate_fd(int irq, int fd, int type, void *dev_id) if (err < 0) goto out; - new_fd = um_kmalloc(sizeof(*new_fd)); err = -ENOMEM; + new_fd = kmalloc(sizeof(struct irq_fd), GFP_KERNEL); if (new_fd == NULL) goto out; @@ -176,9 +176,8 @@ int activate_fd(int irq, int fd, int type, void *dev_id) */ spin_unlock_irqrestore(&irq_lock, flags); kfree(tmp_pfd); - tmp_pfd = NULL; - tmp_pfd = um_kmalloc(n); + tmp_pfd = kmalloc(n, GFP_KERNEL); if (tmp_pfd == NULL) goto out_kfree; diff --git a/arch/um/os-Linux/irq.c b/arch/um/os-Linux/irq.c index d46b818c1311..d1b61d474e0a 100644 --- a/arch/um/os-Linux/irq.c +++ b/arch/um/os-Linux/irq.c @@ -20,6 +20,10 @@ #include "os.h" #include "um_malloc.h" +/* + * Locked by irq_lock in arch/um/kernel/irq.c. Changed by os_create_pollfd + * and os_free_irq_by_cb, which are called under irq_lock. + */ static struct pollfd *pollfds = NULL; static int pollfds_num = 0; static int pollfds_size = 0; @@ -58,7 +62,7 @@ int os_create_pollfd(int fd, int events, void *tmp_pfd, int size_tmpfds) if (pollfds_num == pollfds_size) { if (size_tmpfds <= pollfds_size * sizeof(pollfds[0])) { /* return min size needed for new pollfds area */ - return((pollfds_size + 1) * sizeof(pollfds[0])); + return (pollfds_size + 1) * sizeof(pollfds[0]); } if (pollfds != NULL) { -- cgit v1.2.3 From d9f9d31983aac7764d178583d0777199d081cb1a Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Sat, 10 Feb 2007 01:44:23 -0800 Subject: [PATCH] uml: SIGIO locking comment Comment the use of a mysterious-looking lock. Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/kernel/sigio.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/um/kernel/sigio.c b/arch/um/kernel/sigio.c index 2b0ab438301c..1c831f9ee09f 100644 --- a/arch/um/kernel/sigio.c +++ b/arch/um/kernel/sigio.c @@ -42,6 +42,7 @@ int write_sigio_irq(int fd) return(0); } +/* These are called from os-Linux/sigio.c to protect its pollfds arrays. */ static DEFINE_SPINLOCK(sigio_spinlock); void sigio_lock(void) -- cgit v1.2.3 From 4cffb7fa69349d48d900d98766dc9ad52d9c851e Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Sat, 10 Feb 2007 01:44:24 -0800 Subject: [PATCH] uml: SIGIO formatting fixes Fix formatting in the sigio code. Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/include/sigio.h | 11 ----------- arch/um/kernel/sigio.c | 6 +++--- 2 files changed, 3 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/um/include/sigio.h b/arch/um/include/sigio.h index fe99ea163c2e..434f1a9ae4b3 100644 --- a/arch/um/include/sigio.h +++ b/arch/um/include/sigio.h @@ -12,14 +12,3 @@ extern void sigio_lock(void); extern void sigio_unlock(void); #endif - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/kernel/sigio.c b/arch/um/kernel/sigio.c index 1c831f9ee09f..89f9866a1354 100644 --- a/arch/um/kernel/sigio.c +++ b/arch/um/kernel/sigio.c @@ -23,7 +23,7 @@ static irqreturn_t sigio_interrupt(int irq, void *data) os_read_file(sigio_irq_fd, &c, sizeof(c)); reactivate_fd(sigio_irq_fd, SIGIO_WRITE_IRQ); - return(IRQ_HANDLED); + return IRQ_HANDLED; } int write_sigio_irq(int fd) @@ -36,10 +36,10 @@ int write_sigio_irq(int fd) if(err){ printk("write_sigio_irq : um_request_irq failed, err = %d\n", err); - return(-1); + return -1; } sigio_irq_fd = fd; - return(0); + return 0; } /* These are called from os-Linux/sigio.c to protect its pollfds arrays. */ -- cgit v1.2.3 From de5fe76e436d9e98f8af8005ff23a2e6066aea10 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Sat, 10 Feb 2007 01:44:25 -0800 Subject: [PATCH] uml: umid tidying Add an error message when two umids are put on the command line. umid.h is kind of pointless since it only declares one thing, and that is already declared in os.h. Commented the lack of locking of some data in os-Linux/umid.h. Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/drivers/mconsole_kern.c | 1 - arch/um/drivers/mconsole_user.c | 2 +- arch/um/include/umid.h | 22 ---------------------- arch/um/kernel/um_arch.c | 1 - arch/um/kernel/umid.c | 4 +++- arch/um/os-Linux/umid.c | 3 ++- 6 files changed, 6 insertions(+), 27 deletions(-) delete mode 100644 arch/um/include/umid.h (limited to 'arch') diff --git a/arch/um/drivers/mconsole_kern.c b/arch/um/drivers/mconsole_kern.c index a5a683d6fc5c..178b2eff4a8c 100644 --- a/arch/um/drivers/mconsole_kern.c +++ b/arch/um/drivers/mconsole_kern.c @@ -33,7 +33,6 @@ #include "irq_user.h" #include "init.h" #include "os.h" -#include "umid.h" #include "irq_kern.h" #include "choose-mode.h" diff --git a/arch/um/drivers/mconsole_user.c b/arch/um/drivers/mconsole_user.c index 75aef6f7ef6e..f02634fbf32a 100644 --- a/arch/um/drivers/mconsole_user.c +++ b/arch/um/drivers/mconsole_user.c @@ -16,7 +16,7 @@ #include "user.h" #include "sysdep/ptrace.h" #include "mconsole.h" -#include "umid.h" +#include "os.h" #include "user_util.h" static struct mconsole_command commands[] = { diff --git a/arch/um/include/umid.h b/arch/um/include/umid.h deleted file mode 100644 index 11373c851f15..000000000000 --- a/arch/um/include/umid.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Copyright (C) 2001 Jeff Dike (jdike@karaya.com) - * Licensed under the GPL - */ - -#ifndef __UMID_H__ -#define __UMID_H__ - -extern int umid_file_name(char *name, char *buf, int len); - -#endif - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/kernel/um_arch.c b/arch/um/kernel/um_arch.c index 66f43c906821..84e57f6da1d3 100644 --- a/arch/um/kernel/um_arch.c +++ b/arch/um/kernel/um_arch.c @@ -30,7 +30,6 @@ #include "kern.h" #include "mem_user.h" #include "mem.h" -#include "umid.h" #include "initrd.h" #include "init.h" #include "os.h" diff --git a/arch/um/kernel/umid.c b/arch/um/kernel/umid.c index 4eaee823bfd2..039e16efcd55 100644 --- a/arch/um/kernel/umid.c +++ b/arch/um/kernel/umid.c @@ -16,8 +16,10 @@ static int __init set_umid_arg(char *name, int *add) { int err; - if(umid_inited) + if(umid_inited){ + printf("umid already set\n"); return 0; + } *add = 0; err = set_umid(name); diff --git a/arch/um/os-Linux/umid.c b/arch/um/os-Linux/umid.c index 48092b95c8ab..b462863f7172 100644 --- a/arch/um/os-Linux/umid.c +++ b/arch/um/os-Linux/umid.c @@ -18,7 +18,7 @@ #define UMID_LEN 64 /* Changed by set_umid, which is run early in boot */ -char umid[UMID_LEN] = { 0 }; +static char umid[UMID_LEN] = { 0 }; /* Changed by set_uml_dir and make_uml_dir, which are run early in boot */ static char *uml_dir = UML_DIR; @@ -235,6 +235,7 @@ int __init set_umid(char *name) return 0; } +/* Changed in make_umid, which is called during early boot */ static int umid_setup = 0; int __init make_umid(void) -- cgit v1.2.3 From c538b391a7e8f3cb5d7756ec68d1864429d26a0c Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Sat, 10 Feb 2007 01:44:26 -0800 Subject: [PATCH] uml: ELF locking commentary Comment the lack of locking of the elf data extracted from the ELF headers passed to UML. Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/os-Linux/elf_aux.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/um/os-Linux/elf_aux.c b/arch/um/os-Linux/elf_aux.c index 5a99dd3fbed0..3a8d7e3aae0a 100644 --- a/arch/um/os-Linux/elf_aux.c +++ b/arch/um/os-Linux/elf_aux.c @@ -21,12 +21,11 @@ typedef Elf32_auxv_t elf_auxv_t; typedef Elf64_auxv_t elf_auxv_t; #endif +/* These are initialized very early in boot and never changed */ char * elf_aux_platform; long elf_aux_hwcap; - unsigned long vsyscall_ehdr; unsigned long vsyscall_end; - unsigned long __kernel_vsyscall; __init void scan_elf_aux( char **envp) -- cgit v1.2.3 From 6c59e2f593d0c00c78ec48146de6eaf52a342dd5 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Sat, 10 Feb 2007 01:44:26 -0800 Subject: [PATCH] uml: register handling formatting fixes Formatting fixes in the register handling code. Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/os-Linux/sys-i386/registers.c | 14 +++++++------- arch/um/os-Linux/sys-x86_64/registers.c | 6 +++--- 2 files changed, 10 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/um/os-Linux/sys-i386/registers.c b/arch/um/os-Linux/sys-i386/registers.c index 7cd0369e02b3..79cd93c8c5ed 100644 --- a/arch/um/os-Linux/sys-i386/registers.c +++ b/arch/um/os-Linux/sys-i386/registers.c @@ -34,27 +34,27 @@ void init_thread_registers(union uml_pt_regs *to) int save_fp_registers(int pid, unsigned long *fp_regs) { if(ptrace(PTRACE_GETFPREGS, pid, 0, fp_regs) < 0) - return(-errno); - return(0); + return -errno; + return 0; } int restore_fp_registers(int pid, unsigned long *fp_regs) { if(ptrace(PTRACE_SETFPREGS, pid, 0, fp_regs) < 0) - return(-errno); - return(0); + return -errno; + return 0; } static int move_registers(int pid, int int_op, union uml_pt_regs *regs, int fp_op, unsigned long *fp_regs) { if(ptrace(int_op, pid, 0, regs->skas.regs) < 0) - return(-errno); + return -errno; if(ptrace(fp_op, pid, 0, fp_regs) < 0) - return(-errno); + return -errno; - return(0); + return 0; } void save_registers(int pid, union uml_pt_regs *regs) diff --git a/arch/um/os-Linux/sys-x86_64/registers.c b/arch/um/os-Linux/sys-x86_64/registers.c index cb8e8a263280..a2d7e0c603f7 100644 --- a/arch/um/os-Linux/sys-x86_64/registers.c +++ b/arch/um/os-Linux/sys-x86_64/registers.c @@ -27,12 +27,12 @@ static int move_registers(int pid, int int_op, int fp_op, union uml_pt_regs *regs) { if(ptrace(int_op, pid, 0, regs->skas.regs) < 0) - return(-errno); + return -errno; if(ptrace(fp_op, pid, 0, regs->skas.fp) < 0) - return(-errno); + return -errno; - return(0); + return 0; } void save_registers(int pid, union uml_pt_regs *regs) -- cgit v1.2.3 From 9683da91e2db323ee728041576e29ad7fa9547b9 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Sat, 10 Feb 2007 01:44:27 -0800 Subject: [PATCH] uml: AIO locking and tidying Comment the lack of locking of data that's set up once at boot time. Also fixed a couple of bogus printks. Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/os-Linux/aio.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/um/os-Linux/aio.c b/arch/um/os-Linux/aio.c index f897140cc4ae..6ff12743a0bd 100644 --- a/arch/um/os-Linux/aio.c +++ b/arch/um/os-Linux/aio.c @@ -24,9 +24,6 @@ struct aio_thread_req { struct aio_context *aio; }; -static int aio_req_fd_r = -1; -static int aio_req_fd_w = -1; - #if defined(HAVE_AIO_ABI) #include @@ -111,6 +108,7 @@ static int do_aio(aio_context_t ctx, enum aio_type type, int fd, char *buf, return err; } +/* Initialized in an initcall and unchanged thereafter */ static aio_context_t ctx = 0; static int aio_thread(void *arg) @@ -137,7 +135,7 @@ static int aio_thread(void *arg) err = os_write_file(reply_fd, &reply, sizeof(reply)); if(err != sizeof(reply)) printk("aio_thread - write failed, fd = %d, " - "err = %d\n", aio_req_fd_r, -err); + "err = %d\n", reply_fd, -err); } } return 0; @@ -182,6 +180,11 @@ out: return err; } +/* These are initialized in initcalls and not changed */ +static int aio_req_fd_r = -1; +static int aio_req_fd_w = -1; +static int aio_pid = -1; + static int not_aio_thread(void *arg) { struct aio_thread_req req; @@ -208,14 +211,12 @@ static int not_aio_thread(void *arg) err = os_write_file(req.aio->reply_fd, &reply, sizeof(reply)); if(err != sizeof(reply)) printk("not_aio_thread - write failed, fd = %d, " - "err = %d\n", aio_req_fd_r, -err); + "err = %d\n", req.aio->reply_fd, -err); } return 0; } -static int aio_pid = -1; - static int init_aio_24(void) { unsigned long stack; @@ -308,6 +309,7 @@ static int submit_aio_26(enum aio_type type, int io_fd, char *buf, int len, } #endif +/* Initialized in an initcall and unchanged thereafter */ static int aio_24 = DEFAULT_24_AIO; static int __init set_aio_24(char *name, int *add) -- cgit v1.2.3 From 3a150e1da8bc4e840d5a09fc089052011b5b6503 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Sat, 10 Feb 2007 01:44:28 -0800 Subject: [PATCH] uml: fix error output during early boot The startup code panics a lot if anything goes wrong early on. This is wrong for several reasons, like the kernel isn't running, so you can't really be calling into it yet, but the harm comes from useful error messages being trapped in the printk ring where no one will ever see them. This patch changes these panics to perror and printf in wrappers which also exit. Normal, informational, prints are also wrapped so that fflush(stdout) is called after each one. This is so the output appears in the correct sequence in the event of an error. Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/os-Linux/start_up.c | 154 ++++++++++++++++++++++++++------------------ 1 file changed, 92 insertions(+), 62 deletions(-) (limited to 'arch') diff --git a/arch/um/os-Linux/start_up.c b/arch/um/os-Linux/start_up.c index 735d035a7f33..5178eba9afa5 100644 --- a/arch/um/os-Linux/start_up.c +++ b/arch/um/os-Linux/start_up.c @@ -73,6 +73,34 @@ static int ptrace_child(void *arg) _exit(ret); } +static void fatal_perror(char *str) +{ + perror(str); + exit(1); +} + +static void fatal(char *fmt, ...) +{ + va_list list; + + va_start(list, fmt); + vprintf(fmt, list); + va_end(list); + fflush(stdout); + + exit(1); +} + +static void non_fatal(char *fmt, ...) +{ + va_list list; + + va_start(list, fmt); + vprintf(fmt, list); + va_end(list); + fflush(stdout); +} + static int start_ptraced_child(void **stack_out) { void *stack; @@ -82,16 +110,16 @@ static int start_ptraced_child(void **stack_out) stack = mmap(NULL, PAGE_SIZE, PROT_READ | PROT_WRITE | PROT_EXEC, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0); if(stack == MAP_FAILED) - panic("check_ptrace : mmap failed, errno = %d", errno); + fatal_perror("check_ptrace : mmap failed"); sp = (unsigned long) stack + PAGE_SIZE - sizeof(void *); pid = clone(ptrace_child, (void *) sp, SIGCHLD, NULL); if(pid < 0) - panic("start_ptraced_child : clone failed, errno = %d", errno); + fatal_perror("start_ptraced_child : clone failed"); CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED)); if(n < 0) - panic("check_ptrace : clone failed, errno = %d", errno); + fatal_perror("check_ptrace : clone failed"); if(!WIFSTOPPED(status) || (WSTOPSIG(status) != SIGSTOP)) - panic("check_ptrace : expected SIGSTOP, got status = %d", + fatal("check_ptrace : expected SIGSTOP, got status = %d", status); *stack_out = stack; @@ -105,31 +133,30 @@ static int start_ptraced_child(void **stack_out) * must work anyway! */ static int stop_ptraced_child(int pid, void *stack, int exitcode, - int mustpanic) + int mustexit) { int status, n, ret = 0; if(ptrace(PTRACE_CONT, pid, 0, 0) < 0) - panic("check_ptrace : ptrace failed, errno = %d", errno); + fatal_perror("stop_ptraced_child : ptrace failed"); CATCH_EINTR(n = waitpid(pid, &status, 0)); if(!WIFEXITED(status) || (WEXITSTATUS(status) != exitcode)) { int exit_with = WEXITSTATUS(status); if (exit_with == 2) - printf("check_ptrace : child exited with status 2. " - "Serious trouble happening! Try updating your " - "host skas patch!\nDisabling SYSEMU support."); - printf("check_ptrace : child exited with exitcode %d, while " - "expecting %d; status 0x%x", exit_with, - exitcode, status); - if (mustpanic) - panic("\n"); - else - printf("\n"); + non_fatal("check_ptrace : child exited with status 2. " + "Serious trouble happening! Try updating " + "your host skas patch!\nDisabling SYSEMU " + "support."); + non_fatal("check_ptrace : child exited with exitcode %d, while " + "expecting %d; status 0x%x\n", exit_with, + exitcode, status); + if (mustexit) + exit(1); ret = -1; } if(munmap(stack, PAGE_SIZE) < 0) - panic("check_ptrace : munmap failed, errno = %d", errno); + fatal_perror("check_ptrace : munmap failed"); return ret; } @@ -184,7 +211,7 @@ static void __init check_sysemu(void) void *stack; int pid, n, status, count=0; - printf("Checking syscall emulation patch for ptrace..."); + non_fatal("Checking syscall emulation patch for ptrace..."); sysemu_supported = 0; pid = start_ptraced_child(&stack); @@ -193,31 +220,30 @@ static void __init check_sysemu(void) CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED)); if (n < 0) - panic("check_sysemu : wait failed, errno = %d", errno); + fatal_perror("check_sysemu : wait failed"); if(!WIFSTOPPED(status) || (WSTOPSIG(status) != SIGTRAP)) - panic("check_sysemu : expected SIGTRAP, " - "got status = %d", status); + fatal("check_sysemu : expected SIGTRAP, got status = %d", + status); n = ptrace(PTRACE_POKEUSR, pid, PT_SYSCALL_RET_OFFSET, os_getpid()); if(n < 0) - panic("check_sysemu : failed to modify system " - "call return, errno = %d", errno); + fatal_perror("check_sysemu : failed to modify system call " + "return"); if (stop_ptraced_child(pid, stack, 0, 0) < 0) goto fail_stopped; sysemu_supported = 1; - printf("OK\n"); + non_fatal("OK\n"); set_using_sysemu(!force_sysemu_disabled); - printf("Checking advanced syscall emulation patch for ptrace..."); + non_fatal("Checking advanced syscall emulation patch for ptrace..."); pid = start_ptraced_child(&stack); - if(ptrace(PTRACE_OLDSETOPTIONS, pid, 0, - (void *) PTRACE_O_TRACESYSGOOD) < 0) - panic("check_ptrace: PTRACE_OLDSETOPTIONS failed, errno = %d", - errno); + if((ptrace(PTRACE_OLDSETOPTIONS, pid, 0, + (void *) PTRACE_O_TRACESYSGOOD) < 0)) + fatal_perror("check_ptrace: PTRACE_OLDSETOPTIONS failed"); while(1){ count++; @@ -225,29 +251,30 @@ static void __init check_sysemu(void) goto fail; CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED)); if(n < 0) - panic("check_ptrace : wait failed, errno = %d", errno); + fatal_perror("check_ptrace : wait failed"); + if(WIFSTOPPED(status) && (WSTOPSIG(status) == (SIGTRAP|0x80))){ if (!count) - panic("check_ptrace : SYSEMU_SINGLESTEP " + fatal("check_ptrace : SYSEMU_SINGLESTEP " "doesn't singlestep"); n = ptrace(PTRACE_POKEUSR, pid, PT_SYSCALL_RET_OFFSET, os_getpid()); if(n < 0) - panic("check_sysemu : failed to modify system " - "call return, errno = %d", errno); + fatal_perror("check_sysemu : failed to modify " + "system call return"); break; } else if(WIFSTOPPED(status) && (WSTOPSIG(status) == SIGTRAP)) count++; else - panic("check_ptrace : expected SIGTRAP or " - "(SIGTRAP|0x80), got status = %d", status); + fatal("check_ptrace : expected SIGTRAP or " + "(SIGTRAP | 0x80), got status = %d", status); } if (stop_ptraced_child(pid, stack, 0, 0) < 0) goto fail_stopped; sysemu_supported = 2; - printf("OK\n"); + non_fatal("OK\n"); if ( !force_sysemu_disabled ) set_using_sysemu(sysemu_supported); @@ -256,7 +283,7 @@ static void __init check_sysemu(void) fail: stop_ptraced_child(pid, stack, 1, 0); fail_stopped: - printf("missing\n"); + non_fatal("missing\n"); } static void __init check_ptrace(void) @@ -264,22 +291,25 @@ static void __init check_ptrace(void) void *stack; int pid, syscall, n, status; - printf("Checking that ptrace can change system call numbers..."); + non_fatal("Checking that ptrace can change system call numbers..."); pid = start_ptraced_child(&stack); - if(ptrace(PTRACE_OLDSETOPTIONS, pid, 0, (void *)PTRACE_O_TRACESYSGOOD) < 0) - panic("check_ptrace: PTRACE_OLDSETOPTIONS failed, errno = %d", errno); + if((ptrace(PTRACE_OLDSETOPTIONS, pid, 0, + (void *) PTRACE_O_TRACESYSGOOD) < 0)) + fatal_perror("check_ptrace: PTRACE_OLDSETOPTIONS failed"); while(1){ if(ptrace(PTRACE_SYSCALL, pid, 0, 0) < 0) - panic("check_ptrace : ptrace failed, errno = %d", - errno); + fatal_perror("check_ptrace : ptrace failed"); + CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED)); if(n < 0) - panic("check_ptrace : wait failed, errno = %d", errno); - if(!WIFSTOPPED(status) || (WSTOPSIG(status) != (SIGTRAP|0x80))) - panic("check_ptrace : expected (SIGTRAP|0x80), " - "got status = %d", status); + fatal_perror("check_ptrace : wait failed"); + + if(!WIFSTOPPED(status) || + (WSTOPSIG(status) != (SIGTRAP | 0x80))) + fatal("check_ptrace : expected (SIGTRAP|0x80), " + "got status = %d", status); syscall = ptrace(PTRACE_PEEKUSR, pid, PT_SYSCALL_NR_OFFSET, 0); @@ -287,13 +317,13 @@ static void __init check_ptrace(void) n = ptrace(PTRACE_POKEUSR, pid, PT_SYSCALL_NR_OFFSET, __NR_getppid); if(n < 0) - panic("check_ptrace : failed to modify system " - "call, errno = %d", errno); + fatal_perror("check_ptrace : failed to modify " + "system call"); break; } } stop_ptraced_child(pid, stack, 0, 1); - printf("OK\n"); + non_fatal("OK\n"); check_sysemu(); } @@ -352,22 +382,22 @@ static inline void check_skas3_ptrace_faultinfo(void) void *stack; int pid, n; - printf(" - PTRACE_FAULTINFO..."); + non_fatal(" - PTRACE_FAULTINFO..."); pid = start_ptraced_child(&stack); n = ptrace(PTRACE_FAULTINFO, pid, 0, &fi); if (n < 0) { ptrace_faultinfo = 0; if(errno == EIO) - printf("not found\n"); + non_fatal("not found\n"); else perror("not found"); } else { if (!ptrace_faultinfo) - printf("found but disabled on command line\n"); + non_fatal("found but disabled on command line\n"); else - printf("found\n"); + non_fatal("found\n"); } init_registers(pid); @@ -385,13 +415,13 @@ static inline void check_skas3_ptrace_ldt(void) .ptr = ldtbuf, .bytecount = sizeof(ldtbuf)}; - printf(" - PTRACE_LDT..."); + non_fatal(" - PTRACE_LDT..."); pid = start_ptraced_child(&stack); n = ptrace(PTRACE_LDT, pid, 0, (unsigned long) &ldt_op); if (n < 0) { if(errno == EIO) - printf("not found\n"); + non_fatal("not found\n"); else { perror("not found"); } @@ -399,9 +429,9 @@ static inline void check_skas3_ptrace_ldt(void) } else { if(ptrace_ldt) - printf("found\n"); + non_fatal("found\n"); else - printf("found, but use is disabled\n"); + non_fatal("found, but use is disabled\n"); } stop_ptraced_child(pid, stack, 1, 1); @@ -416,22 +446,22 @@ static inline void check_skas3_ptrace_ldt(void) static inline void check_skas3_proc_mm(void) { - printf(" - /proc/mm..."); + non_fatal(" - /proc/mm..."); if (access("/proc/mm", W_OK) < 0) { proc_mm = 0; - printf("not found\n"); + perror("not found"); } else { if (!proc_mm) - printf("found but disabled on command line\n"); + non_fatal("found but disabled on command line\n"); else - printf("found\n"); + non_fatal("found\n"); } } int can_do_skas(void) { - printf("Checking for the skas3 patch in the host:\n"); + non_fatal("Checking for the skas3 patch in the host:\n"); check_skas3_proc_mm(); check_skas3_ptrace_faultinfo(); -- cgit v1.2.3 From f355559cf78455ed6be103b020e4b800230c64eb Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Sat, 10 Feb 2007 01:44:29 -0800 Subject: [PATCH] uml: x86_64 thread fixes x86_64 needs some TLS fixes. What was missing was remembering the child thread id during clone and stuffing it into the child during each context switch. The %fs value is stored separately in the thread structure since the host controls what effect it has on the actual register file. The host also needs to store it in its own thread struct, so we need the value kept outside the register file. arch_prctl_skas was fixed to call PTRACE_ARCH_PRCTL appropriately. There is some saving and restoring of registers in the ARCH_SET_* cases so that the correct set of registers are changed on the host and restored to the process when it runs again. Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/include/os.h | 2 + arch/um/os-Linux/sys-x86_64/Makefile | 2 +- arch/um/os-Linux/sys-x86_64/prctl.c | 12 ++++++ arch/um/sys-x86_64/syscalls.c | 73 +++++++++++++++++++++++++++--------- arch/um/sys-x86_64/tls.c | 11 ++++-- 5 files changed, 77 insertions(+), 23 deletions(-) create mode 100644 arch/um/os-Linux/sys-x86_64/prctl.c (limited to 'arch') diff --git a/arch/um/include/os.h b/arch/um/include/os.h index 8f602667296d..8629bd191492 100644 --- a/arch/um/include/os.h +++ b/arch/um/include/os.h @@ -340,4 +340,6 @@ extern void maybe_sigio_broken(int fd, int read); extern void sig_handler_common_skas(int sig, void *sc_ptr); extern void user_signal(int sig, union uml_pt_regs *regs, int pid); +extern int os_arch_prctl(int pid, int code, unsigned long *addr); + #endif diff --git a/arch/um/os-Linux/sys-x86_64/Makefile b/arch/um/os-Linux/sys-x86_64/Makefile index f67842a7735b..7955e061a678 100644 --- a/arch/um/os-Linux/sys-x86_64/Makefile +++ b/arch/um/os-Linux/sys-x86_64/Makefile @@ -3,7 +3,7 @@ # Licensed under the GPL # -obj-$(CONFIG_MODE_SKAS) = registers.o signal.o +obj-$(CONFIG_MODE_SKAS) = registers.o prctl.o signal.o USER_OBJS := $(obj-y) diff --git a/arch/um/os-Linux/sys-x86_64/prctl.c b/arch/um/os-Linux/sys-x86_64/prctl.c new file mode 100644 index 000000000000..9d34eddb517f --- /dev/null +++ b/arch/um/os-Linux/sys-x86_64/prctl.c @@ -0,0 +1,12 @@ +/* + * Copyright (C) 2007 Jeff Dike (jdike@{addtoit.com,linux.intel.com}) + * Licensed under the GPL + */ + +#include +#include + +int os_arch_prctl(int pid, int code, unsigned long *addr) +{ + return ptrace(PTRACE_ARCH_PRCTL, pid, (unsigned long) addr, code); +} diff --git a/arch/um/sys-x86_64/syscalls.c b/arch/um/sys-x86_64/syscalls.c index 73ce4463f70c..f309fa9bc232 100644 --- a/arch/um/sys-x86_64/syscalls.c +++ b/arch/um/sys-x86_64/syscalls.c @@ -16,6 +16,7 @@ #include "asm/prctl.h" /* XXX This should get the constants from libc */ #include "choose-mode.h" #include "kern.h" +#include "os.h" asmlinkage long sys_uname64(struct new_utsname __user * name) { @@ -58,40 +59,67 @@ static long arch_prctl_tt(int code, unsigned long addr) #ifdef CONFIG_MODE_SKAS -/* XXX: Must also call arch_prctl in the host, beside saving the segment bases! */ -static long arch_prctl_skas(int code, unsigned long addr) +static long arch_prctl_skas(int code, unsigned long __user *addr) { - long ret = 0; + unsigned long *ptr = addr, tmp; + long ret; + int pid = current->mm->context.skas.id.u.pid; + /* + * With ARCH_SET_FS (and ARCH_SET_GS is treated similarly to + * be safe), we need to call arch_prctl on the host because + * setting %fs may result in something else happening (like a + * GDT being set instead). So, we let the host fiddle the + * registers and restore them afterwards. + * + * So, the saved registers are stored to the process (this + * needed because a stub may have been the last thing to run), + * arch_prctl is run on the host, then the registers are read + * back. + */ switch(code){ case ARCH_SET_FS: - current->thread.regs.regs.skas.regs[FS_BASE / sizeof(unsigned long)] = addr; - break; case ARCH_SET_GS: - current->thread.regs.regs.skas.regs[GS_BASE / sizeof(unsigned long)] = addr; + restore_registers(pid, ¤t->thread.regs.regs); + break; + case ARCH_GET_FS: + case ARCH_GET_GS: + /* + * With these two, we read to a local pointer and + * put_user it to the userspace pointer that we were + * given. If addr isn't valid (because it hasn't been + * faulted in or is just bogus), we want put_user to + * fault it in (or return -EFAULT) instead of having + * the host return -EFAULT. + */ + ptr = &tmp; + } + + ret = os_arch_prctl(pid, code, ptr); + if(ret) + return ret; + + switch(code){ + case ARCH_SET_FS: + case ARCH_SET_GS: + save_registers(pid, ¤t->thread.regs.regs); break; case ARCH_GET_FS: - ret = put_user(current->thread.regs.regs.skas. - regs[FS_BASE / sizeof(unsigned long)], - (unsigned long __user *)addr); + ret = put_user(tmp, addr); break; case ARCH_GET_GS: - ret = put_user(current->thread.regs.regs.skas. - regs[GS_BASE / sizeof(unsigned long)], - (unsigned long __user *)addr); + ret = put_user(tmp, addr); break; - default: - ret = -EINVAL; - break; } - return(ret); + return ret; } #endif long sys_arch_prctl(int code, unsigned long addr) { - return(CHOOSE_MODE_PROC(arch_prctl_tt, arch_prctl_skas, code, addr)); + return CHOOSE_MODE_PROC(arch_prctl_tt, arch_prctl_skas, code, + (unsigned long __user *) addr); } long sys_clone(unsigned long clone_flags, unsigned long newsp, @@ -105,5 +133,14 @@ long sys_clone(unsigned long clone_flags, unsigned long newsp, ret = do_fork(clone_flags, newsp, ¤t->thread.regs, 0, parent_tid, child_tid); current->thread.forking = 0; - return(ret); + return ret; +} + +void arch_switch_to_skas(struct task_struct *from, struct task_struct *to) +{ + if(to->thread.arch.fs == 0) + return; + + arch_prctl_skas(ARCH_SET_FS, (void __user *) to->thread.arch.fs); } + diff --git a/arch/um/sys-x86_64/tls.c b/arch/um/sys-x86_64/tls.c index ce1bf1b81c43..febbc94be25f 100644 --- a/arch/um/sys-x86_64/tls.c +++ b/arch/um/sys-x86_64/tls.c @@ -1,14 +1,17 @@ #include "linux/sched.h" -void debug_arch_force_load_TLS(void) -{ -} - void clear_flushed_tls(struct task_struct *task) { } int arch_copy_tls(struct task_struct *t) { + /* + * If CLONE_SETTLS is set, we need to save the thread id + * (which is argument 5, child_tid, of clone) so it can be set + * during context switches. + */ + t->thread.arch.fs = t->thread.regs.regs.skas.regs[R8 / sizeof(long)]; + return 0; } -- cgit v1.2.3 From 6e6d74cfac782a3a4cb5111bd9c25cd95d6b7c6c Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Sat, 10 Feb 2007 01:44:30 -0800 Subject: [PATCH] uml: x86_64 ptrace fixes This patch fixes some missing ptrace bits on x86_64. PTRACE_ARCH_PRCTL is hooked up and implemented. This required generalizing arch_prctl_skas slightly to take a task_struct to modify. Previously, it always operated on current. Reading and writing the debug registers is also enabled by un-ifdefing the code that implements that. It turns out that x86_64 is identical to i386, so the same code can be used. Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/kernel/ptrace.c | 7 +++++++ arch/um/sys-x86_64/ptrace.c | 5 ----- arch/um/sys-x86_64/syscalls.c | 14 ++++++++------ 3 files changed, 15 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/um/kernel/ptrace.c b/arch/um/kernel/ptrace.c index 9a77fb3c269d..627742d89434 100644 --- a/arch/um/kernel/ptrace.c +++ b/arch/um/kernel/ptrace.c @@ -18,6 +18,7 @@ #include "kern_util.h" #include "skas_ptrace.h" #include "sysdep/ptrace.h" +#include "os.h" static inline void set_singlestepping(struct task_struct *child, int on) { @@ -240,6 +241,12 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) ret = 0; break; } +#endif +#ifdef PTRACE_ARCH_PRCTL + case PTRACE_ARCH_PRCTL: + /* XXX Calls ptrace on the host - needs some SMP thinking */ + ret = arch_prctl_skas(child, data, (void *) addr); + break; #endif default: ret = ptrace_request(child, request, addr, data); diff --git a/arch/um/sys-x86_64/ptrace.c b/arch/um/sys-x86_64/ptrace.c index 147bbf05cbc2..55b66e09a98c 100644 --- a/arch/um/sys-x86_64/ptrace.c +++ b/arch/um/sys-x86_64/ptrace.c @@ -71,8 +71,6 @@ int poke_user(struct task_struct *child, long addr, long data) if (addr < MAX_REG_OFFSET) return putreg(child, addr, data); - -#if 0 /* Need x86_64 debugregs handling */ else if((addr >= offsetof(struct user, u_debugreg[0])) && (addr <= offsetof(struct user, u_debugreg[7]))){ addr -= offsetof(struct user, u_debugreg[0]); @@ -81,7 +79,6 @@ int poke_user(struct task_struct *child, long addr, long data) child->thread.arch.debugregs[addr] = data; return 0; } -#endif return -EIO; } @@ -119,14 +116,12 @@ int peek_user(struct task_struct *child, long addr, long data) if(addr < MAX_REG_OFFSET){ tmp = getreg(child, addr); } -#if 0 /* Need x86_64 debugregs handling */ else if((addr >= offsetof(struct user, u_debugreg[0])) && (addr <= offsetof(struct user, u_debugreg[7]))){ addr -= offsetof(struct user, u_debugreg[0]); addr = addr >> 2; tmp = child->thread.arch.debugregs[addr]; } -#endif return put_user(tmp, (unsigned long *) data); } diff --git a/arch/um/sys-x86_64/syscalls.c b/arch/um/sys-x86_64/syscalls.c index f309fa9bc232..01b91f9fa789 100644 --- a/arch/um/sys-x86_64/syscalls.c +++ b/arch/um/sys-x86_64/syscalls.c @@ -59,18 +59,20 @@ static long arch_prctl_tt(int code, unsigned long addr) #ifdef CONFIG_MODE_SKAS -static long arch_prctl_skas(int code, unsigned long __user *addr) +long arch_prctl_skas(struct task_struct *task, int code, + unsigned long __user *addr) { unsigned long *ptr = addr, tmp; long ret; - int pid = current->mm->context.skas.id.u.pid; + int pid = task->mm->context.skas.id.u.pid; /* * With ARCH_SET_FS (and ARCH_SET_GS is treated similarly to * be safe), we need to call arch_prctl on the host because * setting %fs may result in something else happening (like a - * GDT being set instead). So, we let the host fiddle the - * registers and restore them afterwards. + * GDT or thread.fs being set instead). So, we let the host + * fiddle the registers and thread struct and restore the + * registers afterwards. * * So, the saved registers are stored to the process (this * needed because a stub may have been the last thing to run), @@ -118,7 +120,7 @@ static long arch_prctl_skas(int code, unsigned long __user *addr) long sys_arch_prctl(int code, unsigned long addr) { - return CHOOSE_MODE_PROC(arch_prctl_tt, arch_prctl_skas, code, + return CHOOSE_MODE_PROC(arch_prctl_tt, arch_prctl_skas, current, code, (unsigned long __user *) addr); } @@ -141,6 +143,6 @@ void arch_switch_to_skas(struct task_struct *from, struct task_struct *to) if(to->thread.arch.fs == 0) return; - arch_prctl_skas(ARCH_SET_FS, (void __user *) to->thread.arch.fs); + arch_prctl_skas(to, ARCH_SET_FS, (void __user *) to->thread.arch.fs); } -- cgit v1.2.3 From 81d79bec348ab06cba9ae9fc03eb015b6b83703a Mon Sep 17 00:00:00 2001 From: "Ahmed S. Darwish" Date: Sat, 10 Feb 2007 01:44:30 -0800 Subject: [PATCH] V850: user ARRAY_SIZE macro when appropriate Use ARRAY_SIZE macro already defined in linux/kernel.h Signed-off-by: Ahmed S. Darwish Cc: Miles Bader Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/v850/kernel/anna.c | 2 +- arch/v850/kernel/as85ep1.c | 2 +- arch/v850/kernel/fpga85e2c.c | 2 +- arch/v850/kernel/gbus_int.c | 6 +++--- arch/v850/kernel/ma.c | 2 +- arch/v850/kernel/me2.c | 2 +- arch/v850/kernel/rte_cb.c | 4 ++-- arch/v850/kernel/rte_mb_a_pci.c | 3 +-- arch/v850/kernel/rte_me2_cb.c | 3 +-- arch/v850/kernel/teg.c | 2 +- 10 files changed, 13 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/v850/kernel/anna.c b/arch/v850/kernel/anna.c index 40892d3e3c24..0e429041a117 100644 --- a/arch/v850/kernel/anna.c +++ b/arch/v850/kernel/anna.c @@ -114,7 +114,7 @@ static struct v850e_intc_irq_init irq_inits[] = { { "ST", IRQ_INTST(0), IRQ_INTST_NUM, 3, 5 }, { 0 } }; -#define NUM_IRQ_INITS ((sizeof irq_inits / sizeof irq_inits[0]) - 1) +#define NUM_IRQ_INITS (ARRAY_SIZE(irq_inits) - 1) static struct hw_interrupt_type hw_itypes[NUM_IRQ_INITS]; diff --git a/arch/v850/kernel/as85ep1.c b/arch/v850/kernel/as85ep1.c index 5352f8a5aa07..18437bc5c3ad 100644 --- a/arch/v850/kernel/as85ep1.c +++ b/arch/v850/kernel/as85ep1.c @@ -142,7 +142,7 @@ static struct v850e_intc_irq_init irq_inits[] = { { "ST", IRQ_INTST(0), IRQ_INTST_NUM, 3, 5 }, { 0 } }; -#define NUM_IRQ_INITS ((sizeof irq_inits / sizeof irq_inits[0]) - 1) +#define NUM_IRQ_INITS (ARRAY_SIZE(irq_inits) - 1) static struct hw_interrupt_type hw_itypes[NUM_IRQ_INITS]; diff --git a/arch/v850/kernel/fpga85e2c.c b/arch/v850/kernel/fpga85e2c.c index cb04a6954ccb..5c4923558a75 100644 --- a/arch/v850/kernel/fpga85e2c.c +++ b/arch/v850/kernel/fpga85e2c.c @@ -138,7 +138,7 @@ struct v850e_intc_irq_init irq_inits[] = { { "RPU", IRQ_RPU(0), IRQ_RPU_NUM, 1, 6 }, { 0 } }; -#define NUM_IRQ_INITS ((sizeof irq_inits / sizeof irq_inits[0]) - 1) +#define NUM_IRQ_INITS (ARRAY_SIZE(irq_inits) - 1) struct hw_interrupt_type hw_itypes[NUM_IRQ_INITS]; diff --git a/arch/v850/kernel/gbus_int.c b/arch/v850/kernel/gbus_int.c index 25d636e79e6a..b2bcc251f65b 100644 --- a/arch/v850/kernel/gbus_int.c +++ b/arch/v850/kernel/gbus_int.c @@ -16,6 +16,7 @@ #include #include #include +#include #include @@ -36,7 +37,7 @@ struct used_gint { { 1, GBUS_INT_PRIORITY_HIGH }, { 3, GBUS_INT_PRIORITY_LOW } }; -#define NUM_USED_GINTS (sizeof used_gint / sizeof used_gint[0]) +#define NUM_USED_GINTS ARRAY_SIZE(used_gint) /* A table of which GINT is used by each GBUS interrupts (they are assigned based on priority). */ @@ -231,8 +232,7 @@ struct gbus_int_irq_init gbus_irq_inits[] __initdata = { { "GBUS_INT", IRQ_GBUS_INT(0), IRQ_GBUS_INT_NUM, 1, 6}, { 0 } }; -#define NUM_GBUS_IRQ_INITS \ - ((sizeof gbus_irq_inits / sizeof gbus_irq_inits[0]) - 1) +#define NUM_GBUS_IRQ_INITS (ARRAY_SIZE(gbus_irq_inits) - 1) static struct hw_interrupt_type gbus_hw_itypes[NUM_GBUS_IRQ_INITS]; diff --git a/arch/v850/kernel/ma.c b/arch/v850/kernel/ma.c index 2aa8ab0f7edc..143774de75e1 100644 --- a/arch/v850/kernel/ma.c +++ b/arch/v850/kernel/ma.c @@ -43,7 +43,7 @@ static struct v850e_intc_irq_init irq_inits[] = { { "ST", IRQ_INTST(0), IRQ_INTST_NUM, 4, 5 }, { 0 } }; -#define NUM_IRQ_INITS ((sizeof irq_inits / sizeof irq_inits[0]) - 1) +#define NUM_IRQ_INITS (ARRAY_SIZE(irq_inits) - 1) static struct hw_interrupt_type hw_itypes[NUM_IRQ_INITS]; diff --git a/arch/v850/kernel/me2.c b/arch/v850/kernel/me2.c index 14b0c8858aa4..38be5c194f6b 100644 --- a/arch/v850/kernel/me2.c +++ b/arch/v850/kernel/me2.c @@ -44,7 +44,7 @@ static struct v850e_intc_irq_init irq_inits[] = { { "UBTITO", IRQ_INTUBTITO(0), IRQ_INTUBTITO_NUM, 5, 4 }, { 0 } }; -#define NUM_IRQ_INITS ((sizeof irq_inits / sizeof irq_inits[0]) - 1) +#define NUM_IRQ_INITS (ARRAY_SIZE(irq_inits) - 1) static struct hw_interrupt_type hw_itypes[NUM_IRQ_INITS]; diff --git a/arch/v850/kernel/rte_cb.c b/arch/v850/kernel/rte_cb.c index 0f7f6cd705a2..43018e1edebd 100644 --- a/arch/v850/kernel/rte_cb.c +++ b/arch/v850/kernel/rte_cb.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include @@ -176,8 +177,7 @@ static struct gbus_int_irq_init gbus_irq_inits[] = { #endif { 0 } }; -#define NUM_GBUS_IRQ_INITS \ - ((sizeof gbus_irq_inits / sizeof gbus_irq_inits[0]) - 1) +#define NUM_GBUS_IRQ_INITS (ARRAY_SIZE(gbus_irq_inits) - 1) static struct hw_interrupt_type gbus_hw_itypes[NUM_GBUS_IRQ_INITS]; diff --git a/arch/v850/kernel/rte_mb_a_pci.c b/arch/v850/kernel/rte_mb_a_pci.c index 35213fa9f7d8..35a4bd5515cb 100644 --- a/arch/v850/kernel/rte_mb_a_pci.c +++ b/arch/v850/kernel/rte_mb_a_pci.c @@ -70,8 +70,7 @@ static struct mb_pci_dev_irq mb_pci_dev_irqs[] = { /* PCI slot 2 */ { 9, IRQ_MB_A_PCI2(0), 1 } }; -#define NUM_MB_PCI_DEV_IRQS \ - (sizeof mb_pci_dev_irqs / sizeof mb_pci_dev_irqs[0]) +#define NUM_MB_PCI_DEV_IRQS ARRAY_SIZE(mb_pci_dev_irqs) /* PCI configuration primitives. */ diff --git a/arch/v850/kernel/rte_me2_cb.c b/arch/v850/kernel/rte_me2_cb.c index 3be355a029e2..46803d48dffe 100644 --- a/arch/v850/kernel/rte_me2_cb.c +++ b/arch/v850/kernel/rte_me2_cb.c @@ -170,8 +170,7 @@ static struct cb_pic_irq_init cb_pic_irq_inits[] = { { "CB_EXTTM2", IRQ_CB_EXTTM2, 1, 1, 6 }, { 0 } }; -#define NUM_CB_PIC_IRQ_INITS \ - ((sizeof cb_pic_irq_inits / sizeof cb_pic_irq_inits[0]) - 1) +#define NUM_CB_PIC_IRQ_INITS (ARRAY_SIZE(cb_pic_irq_inits) - 1) static struct hw_interrupt_type cb_pic_hw_itypes[NUM_CB_PIC_IRQ_INITS]; static unsigned char cb_pic_active_irqs = 0; diff --git a/arch/v850/kernel/teg.c b/arch/v850/kernel/teg.c index 290d50665016..699248f92aae 100644 --- a/arch/v850/kernel/teg.c +++ b/arch/v850/kernel/teg.c @@ -43,7 +43,7 @@ static struct v850e_intc_irq_init irq_inits[] = { { "ST", IRQ_INTST(0), IRQ_INTST_NUM, 1, 5 }, { 0 } }; -#define NUM_IRQ_INITS ((sizeof irq_inits / sizeof irq_inits[0]) - 1) +#define NUM_IRQ_INITS (ARRAY_SIZE(irq_inits) - 1) static struct hw_interrupt_type hw_itypes[NUM_IRQ_INITS]; -- cgit v1.2.3 From 67d38229dfa64cf9a75f83746dde345f47bbd8dc Mon Sep 17 00:00:00 2001 From: Jean-Paul Saman Date: Sat, 10 Feb 2007 01:44:44 -0800 Subject: [PATCH] disable init/initramfs.c: architectures Update all arch/*/kernel/vmlinux.lds.S to not include space for initramfs when CONFIG_BLK_DEV_INITRAMFS is not selected. This saves another 4 kbytes on most platfoms (some reserve PAGE_SIZE for initramfs). Signed-off-by: Jean-Paul Saman Cc: Al Viro Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/alpha/kernel/vmlinux.lds.S | 2 ++ arch/arm/kernel/vmlinux.lds.S | 2 ++ arch/arm26/kernel/vmlinux-arm26-xip.lds.in | 2 ++ arch/arm26/kernel/vmlinux-arm26.lds.in | 2 ++ arch/avr32/kernel/vmlinux.lds.c | 2 ++ arch/cris/arch-v10/vmlinux.lds.S | 4 +++- arch/cris/arch-v32/vmlinux.lds.S | 2 ++ arch/frv/kernel/vmlinux.lds.S | 2 ++ arch/h8300/kernel/vmlinux.lds.S | 2 ++ arch/i386/kernel/vmlinux.lds.S | 2 ++ arch/ia64/kernel/vmlinux.lds.S | 2 ++ arch/m32r/kernel/vmlinux.lds.S | 4 ++++ arch/m68k/kernel/vmlinux-std.lds | 2 ++ arch/m68k/kernel/vmlinux-sun3.lds | 2 ++ arch/m68knommu/kernel/vmlinux.lds.S | 2 ++ arch/mips/kernel/vmlinux.lds.S | 2 ++ arch/parisc/kernel/vmlinux.lds.S | 2 ++ arch/powerpc/kernel/vmlinux.lds.S | 4 ++-- arch/ppc/kernel/vmlinux.lds.S | 2 ++ arch/s390/kernel/vmlinux.lds.S | 3 +++ arch/sh/kernel/vmlinux.lds.S | 4 ++++ arch/sh64/kernel/vmlinux.lds.S | 4 ++++ arch/sparc/kernel/vmlinux.lds.S | 4 ++++ arch/sparc64/kernel/vmlinux.lds.S | 4 ++++ arch/v850/kernel/vmlinux.lds.S | 4 ++++ arch/x86_64/kernel/vmlinux.lds.S | 4 ++++ arch/xtensa/kernel/vmlinux.lds.S | 2 ++ 27 files changed, 70 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/alpha/kernel/vmlinux.lds.S b/arch/alpha/kernel/vmlinux.lds.S index 76bf071e376c..4cc44bd33d33 100644 --- a/arch/alpha/kernel/vmlinux.lds.S +++ b/arch/alpha/kernel/vmlinux.lds.S @@ -52,10 +52,12 @@ SECTIONS } __initcall_end = .; +#ifdef CONFIG_BLK_DEV_INITRD . = ALIGN(8192); __initramfs_start = .; .init.ramfs : { *(.init.ramfs) } __initramfs_end = .; +#endif . = ALIGN(8); .con_initcall.init : { diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index a8fa75ea07a9..b929a60f7547 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -53,10 +53,12 @@ SECTIONS __security_initcall_start = .; *(.security_initcall.init) __security_initcall_end = .; +#ifdef CONFIG_BLK_DEV_INITRD . = ALIGN(32); __initramfs_start = .; usr/built-in.o(.init.ramfs) __initramfs_end = .; +#endif . = ALIGN(64); __per_cpu_start = .; *(.data.percpu) diff --git a/arch/arm26/kernel/vmlinux-arm26-xip.lds.in b/arch/arm26/kernel/vmlinux-arm26-xip.lds.in index ca61ec8218fe..046a85054018 100644 --- a/arch/arm26/kernel/vmlinux-arm26-xip.lds.in +++ b/arch/arm26/kernel/vmlinux-arm26-xip.lds.in @@ -46,10 +46,12 @@ SECTIONS __con_initcall_start = .; *(.con_initcall.init) __con_initcall_end = .; +#ifdef CONFIG_BLK_DEV_INITRD . = ALIGN(32); __initramfs_start = .; usr/built-in.o(.init.ramfs) __initramfs_end = .; +#endif . = ALIGN(32768); __init_end = .; } diff --git a/arch/arm26/kernel/vmlinux-arm26.lds.in b/arch/arm26/kernel/vmlinux-arm26.lds.in index d1d3418d7eb6..1d2949e83be8 100644 --- a/arch/arm26/kernel/vmlinux-arm26.lds.in +++ b/arch/arm26/kernel/vmlinux-arm26.lds.in @@ -47,10 +47,12 @@ SECTIONS __con_initcall_start = .; *(.con_initcall.init) __con_initcall_end = .; +#ifdef CONFIG_BLK_DEV_INITRD . = ALIGN(32); __initramfs_start = .; usr/built-in.o(.init.ramfs) __initramfs_end = .; +#endif . = ALIGN(32768); __init_end = .; } diff --git a/arch/avr32/kernel/vmlinux.lds.c b/arch/avr32/kernel/vmlinux.lds.c index 5c4424e362b5..ef13b7c78935 100644 --- a/arch/avr32/kernel/vmlinux.lds.c +++ b/arch/avr32/kernel/vmlinux.lds.c @@ -46,10 +46,12 @@ SECTIONS __security_initcall_start = .; *(.security_initcall.init) __security_initcall_end = .; +#ifdef CONFIG_BLK_DEV_INITRD . = ALIGN(32); __initramfs_start = .; *(.init.ramfs) __initramfs_end = .; +#endif . = ALIGN(4096); __init_end = .; } diff --git a/arch/cris/arch-v10/vmlinux.lds.S b/arch/cris/arch-v10/vmlinux.lds.S index 689729a7e66e..4b348b38cf33 100644 --- a/arch/cris/arch-v10/vmlinux.lds.S +++ b/arch/cris/arch-v10/vmlinux.lds.S @@ -82,7 +82,8 @@ SECTIONS __con_initcall_end = .; } SECURITY_INIT - + +#ifdef CONFIG_BLK_DEV_INITRD .init.ramfs : { __initramfs_start = .; *(.init.ramfs) @@ -93,6 +94,7 @@ SECTIONS FILL (0); . = ALIGN (8192); } +#endif __vmlinux_end = .; /* last address of the physical file */ __init_end = .; diff --git a/arch/cris/arch-v32/vmlinux.lds.S b/arch/cris/arch-v32/vmlinux.lds.S index 472d4b3c4cf4..e124fcd766d5 100644 --- a/arch/cris/arch-v32/vmlinux.lds.S +++ b/arch/cris/arch-v32/vmlinux.lds.S @@ -95,6 +95,7 @@ SECTIONS .data.percpu : { *(.data.percpu) } __per_cpu_end = .; +#ifdef CONFIG_BLK_DEV_INITRD .init.ramfs : { __initramfs_start = .; *(.init.ramfs) @@ -107,6 +108,7 @@ SECTIONS FILL (0); . = ALIGN (8192); } +#endif __vmlinux_end = .; /* Last address of the physical file. */ __init_end = .; diff --git a/arch/frv/kernel/vmlinux.lds.S b/arch/frv/kernel/vmlinux.lds.S index 9c1fb12367fa..97910e016825 100644 --- a/arch/frv/kernel/vmlinux.lds.S +++ b/arch/frv/kernel/vmlinux.lds.S @@ -61,10 +61,12 @@ SECTIONS .data.percpu : { *(.data.percpu) } __per_cpu_end = .; +#ifdef CONFIG_BLK_DEV_INITRD . = ALIGN(4096); __initramfs_start = .; .init.ramfs : { *(.init.ramfs) } __initramfs_end = .; +#endif . = ALIGN(THREAD_SIZE); __init_end = .; diff --git a/arch/h8300/kernel/vmlinux.lds.S b/arch/h8300/kernel/vmlinux.lds.S index f05288be8878..65f1cdc5ee04 100644 --- a/arch/h8300/kernel/vmlinux.lds.S +++ b/arch/h8300/kernel/vmlinux.lds.S @@ -126,10 +126,12 @@ SECTIONS ___con_initcall_end = .; *(.exit.text) *(.exit.data) +#if defined(CONFIG_BLK_DEV_INITRD) . = ALIGN(4); ___initramfs_start = .; *(.init.ramfs) ___initramfs_end = .; +#endif . = ALIGN(0x4) ; ___init_end = .; __edata = . ; diff --git a/arch/i386/kernel/vmlinux.lds.S b/arch/i386/kernel/vmlinux.lds.S index a53c8b1854b5..5038a73d554e 100644 --- a/arch/i386/kernel/vmlinux.lds.S +++ b/arch/i386/kernel/vmlinux.lds.S @@ -181,12 +181,14 @@ SECTIONS from .altinstructions and .eh_frame */ .exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) { *(.exit.text) } .exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) { *(.exit.data) } +#if defined(CONFIG_BLK_DEV_INITRD) . = ALIGN(4096); .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) { __initramfs_start = .; *(.init.ramfs) __initramfs_end = .; } +#endif . = ALIGN(L1_CACHE_BYTES); .data.percpu : AT(ADDR(.data.percpu) - LOAD_OFFSET) { __per_cpu_start = .; diff --git a/arch/ia64/kernel/vmlinux.lds.S b/arch/ia64/kernel/vmlinux.lds.S index 8f3d0066f446..25dd55e4db24 100644 --- a/arch/ia64/kernel/vmlinux.lds.S +++ b/arch/ia64/kernel/vmlinux.lds.S @@ -111,12 +111,14 @@ SECTIONS .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) { *(.init.data) } +#ifdef CONFIG_BLK_DEV_INITRD .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) { __initramfs_start = .; *(.init.ramfs) __initramfs_end = .; } +#endif . = ALIGN(16); .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) diff --git a/arch/m32r/kernel/vmlinux.lds.S b/arch/m32r/kernel/vmlinux.lds.S index c497a2fc88ed..439cc257cd1d 100644 --- a/arch/m32r/kernel/vmlinux.lds.S +++ b/arch/m32r/kernel/vmlinux.lds.S @@ -102,10 +102,14 @@ SECTIONS from .altinstructions and .eh_frame */ .exit.text : { *(.exit.text) } .exit.data : { *(.exit.data) } + +#ifdef CONFIG_BLK_DEV_INITRD . = ALIGN(4096); __initramfs_start = .; .init.ramfs : { *(.init.ramfs) } __initramfs_end = .; +#endif + . = ALIGN(32); __per_cpu_start = .; .data.percpu : { *(.data.percpu) } diff --git a/arch/m68k/kernel/vmlinux-std.lds b/arch/m68k/kernel/vmlinux-std.lds index d2794452b195..437b4f8d86c5 100644 --- a/arch/m68k/kernel/vmlinux-std.lds +++ b/arch/m68k/kernel/vmlinux-std.lds @@ -61,10 +61,12 @@ SECTIONS .con_initcall.init : { *(.con_initcall.init) } __con_initcall_end = .; SECURITY_INIT +#ifdef CONFIG_BLK_DEV_INITRD . = ALIGN(8192); __initramfs_start = .; .init.ramfs : { *(.init.ramfs) } __initramfs_end = .; +#endif . = ALIGN(8192); __init_end = .; diff --git a/arch/m68k/kernel/vmlinux-sun3.lds b/arch/m68k/kernel/vmlinux-sun3.lds index 8c7eccbfc982..2868e206fc76 100644 --- a/arch/m68k/kernel/vmlinux-sun3.lds +++ b/arch/m68k/kernel/vmlinux-sun3.lds @@ -55,10 +55,12 @@ __init_begin = .; .con_initcall.init : { *(.con_initcall.init) } __con_initcall_end = .; SECURITY_INIT +#ifdef CONFIG_BLK_DEV_INITRD . = ALIGN(8192); __initramfs_start = .; .init.ramfs : { *(.init.ramfs) } __initramfs_end = .; +#endif . = ALIGN(8192); __init_end = .; .data.init.task : { *(.data.init_task) } diff --git a/arch/m68knommu/kernel/vmlinux.lds.S b/arch/m68knommu/kernel/vmlinux.lds.S index bfade20a9e5e..c86a1bf589d4 100644 --- a/arch/m68knommu/kernel/vmlinux.lds.S +++ b/arch/m68knommu/kernel/vmlinux.lds.S @@ -159,10 +159,12 @@ SECTIONS { __security_initcall_start = .; *(.security_initcall.init) __security_initcall_end = .; +#ifdef CONFIG_BLK_DEV_INITRD . = ALIGN(4); __initramfs_start = .; *(.init.ramfs) __initramfs_end = .; +#endif . = ALIGN(4096); __init_end = .; } > INIT diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S index cecff24cc972..c76b793310c2 100644 --- a/arch/mips/kernel/vmlinux.lds.S +++ b/arch/mips/kernel/vmlinux.lds.S @@ -113,10 +113,12 @@ SECTIONS references from .rodata */ .exit.text : { *(.exit.text) } .exit.data : { *(.exit.data) } +#if defined(CONFIG_BLK_DEV_INITRD) . = ALIGN(_PAGE_SIZE); __initramfs_start = .; .init.ramfs : { *(.init.ramfs) } __initramfs_end = .; +#endif . = ALIGN(32); __per_cpu_start = .; .data.percpu : { *(.data.percpu) } diff --git a/arch/parisc/kernel/vmlinux.lds.S b/arch/parisc/kernel/vmlinux.lds.S index 7b943b45f7cd..3b78c2794c36 100644 --- a/arch/parisc/kernel/vmlinux.lds.S +++ b/arch/parisc/kernel/vmlinux.lds.S @@ -173,10 +173,12 @@ SECTIONS from .altinstructions and .eh_frame */ .exit.text : { *(.exit.text) } .exit.data : { *(.exit.data) } +#ifdef CONFIG_BLK_DEV_INITRD . = ALIGN(ASM_PAGE_SIZE); __initramfs_start = .; .init.ramfs : { *(.init.ramfs) } __initramfs_end = .; +#endif . = ALIGN(32); __per_cpu_start = .; .data.percpu : { *(.data.percpu) } diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S index 04b8e71bf5b0..7eefeb4a30e7 100644 --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -131,14 +131,14 @@ SECTIONS __stop___fw_ftr_fixup = .; } #endif - +#ifdef CONFIG_BLK_DEV_INITRD . = ALIGN(PAGE_SIZE); .init.ramfs : { __initramfs_start = .; *(.init.ramfs) __initramfs_end = .; } - +#endif #ifdef CONFIG_PPC32 . = ALIGN(32); #else diff --git a/arch/ppc/kernel/vmlinux.lds.S b/arch/ppc/kernel/vmlinux.lds.S index 61921268a0d0..a0625562a44b 100644 --- a/arch/ppc/kernel/vmlinux.lds.S +++ b/arch/ppc/kernel/vmlinux.lds.S @@ -135,10 +135,12 @@ SECTIONS .data.percpu : { *(.data.percpu) } __per_cpu_end = .; +#ifdef CONFIG_BLK_DEV_INITRD . = ALIGN(4096); __initramfs_start = .; .init.ramfs : { *(.init.ramfs) } __initramfs_end = .; +#endif . = ALIGN(4096); __init_end = .; diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S index a48907392522..c30716ae130c 100644 --- a/arch/s390/kernel/vmlinux.lds.S +++ b/arch/s390/kernel/vmlinux.lds.S @@ -91,11 +91,14 @@ SECTIONS .con_initcall.init : { *(.con_initcall.init) } __con_initcall_end = .; SECURITY_INIT + +#ifdef CONFIG_BLK_DEV_INITRD . = ALIGN(256); __initramfs_start = .; .init.ramfs : { *(.init.initramfs) } . = ALIGN(2); __initramfs_end = .; +#endif . = ALIGN(256); __per_cpu_start = .; .data.percpu : { *(.data.percpu) } diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S index f34bdcc33a7d..75de165867a0 100644 --- a/arch/sh/kernel/vmlinux.lds.S +++ b/arch/sh/kernel/vmlinux.lds.S @@ -83,9 +83,13 @@ SECTIONS .con_initcall.init : { *(.con_initcall.init) } __con_initcall_end = .; SECURITY_INIT + +#ifdef CONFIG_BLK_DEV_INITRD __initramfs_start = .; .init.ramfs : { *(.init.ramfs) } __initramfs_end = .; +#endif + __machvec_start = .; .init.machvec : { *(.init.machvec) } __machvec_end = .; diff --git a/arch/sh64/kernel/vmlinux.lds.S b/arch/sh64/kernel/vmlinux.lds.S index 95c4d753e357..a59c5e998131 100644 --- a/arch/sh64/kernel/vmlinux.lds.S +++ b/arch/sh64/kernel/vmlinux.lds.S @@ -115,9 +115,13 @@ SECTIONS .con_initcall.init : C_PHYS(.con_initcall.init) { *(.con_initcall.init) } __con_initcall_end = .; SECURITY_INIT + +#ifdef CONFIG_BLK_DEV_INITRD __initramfs_start = .; .init.ramfs : C_PHYS(.init.ramfs) { *(.init.ramfs) } __initramfs_end = .; +#endif + . = ALIGN(PAGE_SIZE); __init_end = .; diff --git a/arch/sparc/kernel/vmlinux.lds.S b/arch/sparc/kernel/vmlinux.lds.S index b73e6b9067ed..e5c24e0521de 100644 --- a/arch/sparc/kernel/vmlinux.lds.S +++ b/arch/sparc/kernel/vmlinux.lds.S @@ -57,10 +57,14 @@ SECTIONS .con_initcall.init : { *(.con_initcall.init) } __con_initcall_end = .; SECURITY_INIT + +#ifdef CONFIG_BLK_DEV_INITRD . = ALIGN(4096); __initramfs_start = .; .init.ramfs : { *(.init.ramfs) } __initramfs_end = .; +#endif + . = ALIGN(32); __per_cpu_start = .; .data.percpu : { *(.data.percpu) } diff --git a/arch/sparc64/kernel/vmlinux.lds.S b/arch/sparc64/kernel/vmlinux.lds.S index 4a6063f33e7a..13fa2a2e4513 100644 --- a/arch/sparc64/kernel/vmlinux.lds.S +++ b/arch/sparc64/kernel/vmlinux.lds.S @@ -81,10 +81,14 @@ SECTIONS __sun4v_2insn_patch = .; .sun4v_2insn_patch : { *(.sun4v_2insn_patch) } __sun4v_2insn_patch_end = .; + +#ifdef CONFIG_BLK_DEV_INITRD . = ALIGN(8192); __initramfs_start = .; .init.ramfs : { *(.init.ramfs) } __initramfs_end = .; +#endif + . = ALIGN(8192); __per_cpu_start = .; .data.percpu : { *(.data.percpu) } diff --git a/arch/v850/kernel/vmlinux.lds.S b/arch/v850/kernel/vmlinux.lds.S index 3a5fd07fe064..356308221251 100644 --- a/arch/v850/kernel/vmlinux.lds.S +++ b/arch/v850/kernel/vmlinux.lds.S @@ -190,12 +190,16 @@ __root_fs_image_start = . ; \ *(.root) \ __root_fs_image_end = . ; + +#ifdef CONFIG_BLK_DEV_INITRD /* The initramfs archive. */ #define INITRAMFS_CONTENTS \ . = ALIGN (4) ; \ ___initramfs_start = . ; \ *(.init.ramfs) \ ___initramfs_end = . ; +#endif + /* Where the initial bootmap (bitmap for the boot-time memory allocator) should be place. */ #define BOOTMAP_CONTENTS \ diff --git a/arch/x86_64/kernel/vmlinux.lds.S b/arch/x86_64/kernel/vmlinux.lds.S index 1e54ddf2338d..c360c4225244 100644 --- a/arch/x86_64/kernel/vmlinux.lds.S +++ b/arch/x86_64/kernel/vmlinux.lds.S @@ -192,10 +192,14 @@ SECTIONS from .altinstructions and .eh_frame */ .exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) { *(.exit.text) } .exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) { *(.exit.data) } + +#ifdef CONFIG_BLK_DEV_INITRD . = ALIGN(4096); __initramfs_start = .; .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) { *(.init.ramfs) } __initramfs_end = .; +#endif + . = ALIGN(CONFIG_X86_L1_CACHE_BYTES); __per_cpu_start = .; .data.percpu : AT(ADDR(.data.percpu) - LOAD_OFFSET) { *(.data.percpu) } diff --git a/arch/xtensa/kernel/vmlinux.lds.S b/arch/xtensa/kernel/vmlinux.lds.S index a36c104c3a52..ab6370054cee 100644 --- a/arch/xtensa/kernel/vmlinux.lds.S +++ b/arch/xtensa/kernel/vmlinux.lds.S @@ -203,10 +203,12 @@ SECTIONS .data.percpu : { *(.data.percpu) } __per_cpu_end = .; +#ifdef CONFIG_BLK_DEV_INITRD . = ALIGN(4096); __initramfs_start =.; .init.ramfs : { *(.init.ramfs) } __initramfs_end = .; +#endif /* We need this dummy segment here */ -- cgit v1.2.3 From 4564f9e5fd00767d11fcf61e0d52787706dfcc87 Mon Sep 17 00:00:00 2001 From: Tilman Schmidt Date: Sat, 10 Feb 2007 01:45:00 -0800 Subject: [PATCH] consolidate line discipline number definitions The line discipline numbers N_* are currently defined for each architecture individually, but (except for a seeming mistake) identically, in asm/termios.h. There is no obvious reason why these numbers should be architecture specific, nor any apparent relationship with the termios structure. The total number of these, NR_LDISCS, is defined in linux/tty.h anyway. So I propose the following patch which moves the definitions of the individual line disciplines to linux/tty.h too. Three of these numbers (N_MASC, N_PROFIBUS_FDL, and N_SMSBLOCK) are unused in the current kernel, but the patch still keeps the complete set in case there are plans to use them yet. Signed-off-by: Tilman Schmidt Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/sparc/kernel/sunos_ioctl.c | 1 + arch/sparc64/kernel/sunos_ioctl32.c | 1 + 2 files changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/sparc/kernel/sunos_ioctl.c b/arch/sparc/kernel/sunos_ioctl.c index a6ba3d26222c..32e8274e4357 100644 --- a/arch/sparc/kernel/sunos_ioctl.c +++ b/arch/sparc/kernel/sunos_ioctl.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/sparc64/kernel/sunos_ioctl32.c b/arch/sparc64/kernel/sunos_ioctl32.c index 3f619ead22cc..a05e43d51755 100644 --- a/arch/sparc64/kernel/sunos_ioctl32.c +++ b/arch/sparc64/kernel/sunos_ioctl32.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include #include -- cgit v1.2.3 From c376222960ae91d5ffb9197ee36771aaed1d9f90 Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Sat, 10 Feb 2007 01:45:03 -0800 Subject: [PATCH] Transform kmem_cache_alloc()+memset(0) -> kmem_cache_zalloc(). Replace appropriate pairs of "kmem_cache_alloc()" + "memset(0)" with the corresponding "kmem_cache_zalloc()" call. Signed-off-by: Robert P. J. Day Cc: "Luck, Tony" Cc: Andi Kleen Cc: Roland McGrath Cc: James Bottomley Cc: Greg KH Acked-by: Joel Becker Cc: Steven Whitehouse Cc: Jan Kara Cc: Michael Halcrow Cc: "David S. Miller" Cc: Stephen Smalley Cc: James Morris Cc: Chris Wright Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ia64/ia32/binfmt_elf32.c | 13 ++++--------- arch/ia64/kernel/perfmon.c | 3 +-- arch/ia64/mm/init.c | 6 ++---- arch/x86_64/ia32/ia32_binfmt.c | 4 +--- 4 files changed, 8 insertions(+), 18 deletions(-) (limited to 'arch') diff --git a/arch/ia64/ia32/binfmt_elf32.c b/arch/ia64/ia32/binfmt_elf32.c index 578737ec7629..c05bda662364 100644 --- a/arch/ia64/ia32/binfmt_elf32.c +++ b/arch/ia64/ia32/binfmt_elf32.c @@ -91,9 +91,8 @@ ia64_elf32_init (struct pt_regs *regs) * it with privilege level 3 because the IVE uses non-privileged accesses to these * tables. IA-32 segmentation is used to protect against IA-32 accesses to them. */ - vma = kmem_cache_alloc(vm_area_cachep, GFP_KERNEL); + vma = kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL); if (vma) { - memset(vma, 0, sizeof(*vma)); vma->vm_mm = current->mm; vma->vm_start = IA32_GDT_OFFSET; vma->vm_end = vma->vm_start + PAGE_SIZE; @@ -117,9 +116,8 @@ ia64_elf32_init (struct pt_regs *regs) * code is locked in specific gate page, which is pointed by pretcode * when setup_frame_ia32 */ - vma = kmem_cache_alloc(vm_area_cachep, GFP_KERNEL); + vma = kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL); if (vma) { - memset(vma, 0, sizeof(*vma)); vma->vm_mm = current->mm; vma->vm_start = IA32_GATE_OFFSET; vma->vm_end = vma->vm_start + PAGE_SIZE; @@ -142,9 +140,8 @@ ia64_elf32_init (struct pt_regs *regs) * Install LDT as anonymous memory. This gives us all-zero segment descriptors * until a task modifies them via modify_ldt(). */ - vma = kmem_cache_alloc(vm_area_cachep, GFP_KERNEL); + vma = kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL); if (vma) { - memset(vma, 0, sizeof(*vma)); vma->vm_mm = current->mm; vma->vm_start = IA32_LDT_OFFSET; vma->vm_end = vma->vm_start + PAGE_ALIGN(IA32_LDT_ENTRIES*IA32_LDT_ENTRY_SIZE); @@ -214,12 +211,10 @@ ia32_setup_arg_pages (struct linux_binprm *bprm, int executable_stack) bprm->loader += stack_base; bprm->exec += stack_base; - mpnt = kmem_cache_alloc(vm_area_cachep, GFP_KERNEL); + mpnt = kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL); if (!mpnt) return -ENOMEM; - memset(mpnt, 0, sizeof(*mpnt)); - down_write(¤t->mm->mmap_sem); { mpnt->vm_mm = current->mm; diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c index aa94f60fa8e7..86e144f321ff 100644 --- a/arch/ia64/kernel/perfmon.c +++ b/arch/ia64/kernel/perfmon.c @@ -2301,12 +2301,11 @@ pfm_smpl_buffer_alloc(struct task_struct *task, pfm_context_t *ctx, unsigned lon DPRINT(("smpl_buf @%p\n", smpl_buf)); /* allocate vma */ - vma = kmem_cache_alloc(vm_area_cachep, GFP_KERNEL); + vma = kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL); if (!vma) { DPRINT(("Cannot allocate vma\n")); goto error_kmem; } - memset(vma, 0, sizeof(*vma)); /* * partially initialize the vma for the sampling buffer diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c index 760dda4d5b6e..f225dd72968b 100644 --- a/arch/ia64/mm/init.c +++ b/arch/ia64/mm/init.c @@ -176,9 +176,8 @@ ia64_init_addr_space (void) * the problem. When the process attempts to write to the register backing store * for the first time, it will get a SEGFAULT in this case. */ - vma = kmem_cache_alloc(vm_area_cachep, GFP_KERNEL); + vma = kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL); if (vma) { - memset(vma, 0, sizeof(*vma)); vma->vm_mm = current->mm; vma->vm_start = current->thread.rbs_bot & PAGE_MASK; vma->vm_end = vma->vm_start + PAGE_SIZE; @@ -195,9 +194,8 @@ ia64_init_addr_space (void) /* map NaT-page at address zero to speed up speculative dereferencing of NULL: */ if (!(current->personality & MMAP_PAGE_ZERO)) { - vma = kmem_cache_alloc(vm_area_cachep, GFP_KERNEL); + vma = kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL); if (vma) { - memset(vma, 0, sizeof(*vma)); vma->vm_mm = current->mm; vma->vm_end = PAGE_SIZE; vma->vm_page_prot = __pgprot(pgprot_val(PAGE_READONLY) | _PAGE_MA_NAT); diff --git a/arch/x86_64/ia32/ia32_binfmt.c b/arch/x86_64/ia32/ia32_binfmt.c index 5ce0bd486bbf..6efe04f3cbca 100644 --- a/arch/x86_64/ia32/ia32_binfmt.c +++ b/arch/x86_64/ia32/ia32_binfmt.c @@ -300,12 +300,10 @@ int ia32_setup_arg_pages(struct linux_binprm *bprm, unsigned long stack_top, bprm->loader += stack_base; bprm->exec += stack_base; - mpnt = kmem_cache_alloc(vm_area_cachep, GFP_KERNEL); + mpnt = kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL); if (!mpnt) return -ENOMEM; - memset(mpnt, 0, sizeof(*mpnt)); - down_write(&mm->mmap_sem); { mpnt->vm_mm = mm; -- cgit v1.2.3 From b035b6de24932ffd4a2b1c6619a2f5711da6920f Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Sat, 10 Feb 2007 01:45:10 -0800 Subject: [PATCH] Consolidate default sched_clock() Use attribute(weak). Signed-off-by: Alexey Dobriyan Acked-by: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/alpha/kernel/time.c | 11 ----------- arch/arm/kernel/time.c | 10 ---------- arch/arm26/kernel/time.c | 8 -------- arch/avr32/kernel/time.c | 9 --------- arch/cris/kernel/time.c | 8 -------- arch/h8300/kernel/time.c | 6 ------ arch/m32r/kernel/time.c | 8 -------- arch/m68k/kernel/time.c | 9 --------- arch/m68knommu/kernel/time.c | 9 --------- arch/mips/kernel/time.c | 5 ----- arch/parisc/kernel/time.c | 11 ----------- arch/sh/kernel/time.c | 8 -------- arch/sh64/kernel/time.c | 9 --------- arch/sparc/kernel/time.c | 9 --------- arch/v850/kernel/time.c | 8 -------- arch/xtensa/kernel/time.c | 9 --------- 16 files changed, 137 deletions(-) (limited to 'arch') diff --git a/arch/alpha/kernel/time.c b/arch/alpha/kernel/time.c index d7053eb4ffcf..4748e14a28bc 100644 --- a/arch/alpha/kernel/time.c +++ b/arch/alpha/kernel/time.c @@ -90,17 +90,6 @@ static inline __u32 rpcc(void) return result; } -/* - * Scheduler clock - returns current time in nanosec units. - * - * Copied from ARM code for expediency... ;-} - */ -unsigned long long sched_clock(void) -{ - return (unsigned long long)jiffies * (1000000000 / HZ); -} - - /* * timer_interrupt() needs to keep up the real-time clock, * as well as call the "do_timer()" routine every clocktick diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c index 3c8cdcfe8d4a..ee47c532e210 100644 --- a/arch/arm/kernel/time.c +++ b/arch/arm/kernel/time.c @@ -77,16 +77,6 @@ static unsigned long dummy_gettimeoffset(void) } #endif -/* - * Scheduler clock - returns current time in nanosec units. - * This is the default implementation. Sub-architecture - * implementations can override this. - */ -unsigned long long __attribute__((weak)) sched_clock(void) -{ - return (unsigned long long)jiffies * (1000000000 / HZ); -} - /* * An implementation of printk_clock() independent from * sched_clock(). This avoids non-bootable kernels when diff --git a/arch/arm26/kernel/time.c b/arch/arm26/kernel/time.c index 1206469b2b86..0f1d57fbd3d7 100644 --- a/arch/arm26/kernel/time.c +++ b/arch/arm26/kernel/time.c @@ -89,14 +89,6 @@ static unsigned long gettimeoffset(void) return (offset + LATCH/2) / LATCH; } -/* - * Scheduler clock - returns current time in nanosec units. - */ -unsigned long long sched_clock(void) -{ - return (unsigned long long)jiffies * (1000000000 / HZ); -} - static unsigned long next_rtc_update; /* diff --git a/arch/avr32/kernel/time.c b/arch/avr32/kernel/time.c index 5a247ba71a72..a2f74affaa98 100644 --- a/arch/avr32/kernel/time.c +++ b/arch/avr32/kernel/time.c @@ -109,15 +109,6 @@ static void avr32_hpt_init(unsigned int count) sysreg_write(COUNT, count); } -/* - * Scheduler clock - returns current time in nanosec units. - */ -unsigned long long sched_clock(void) -{ - /* There must be better ways...? */ - return (unsigned long long)jiffies * (1000000000 / HZ); -} - /* * local_timer_interrupt() does profiling and process accounting on a * per-CPU basis. diff --git a/arch/cris/kernel/time.c b/arch/cris/kernel/time.c index 22a1aa511aea..acfd04559405 100644 --- a/arch/cris/kernel/time.c +++ b/arch/cris/kernel/time.c @@ -216,14 +216,6 @@ cris_do_profile(struct pt_regs* regs) #endif } -/* - * Scheduler clock - returns current time in nanosec units. - */ -unsigned long long sched_clock(void) -{ - return (unsigned long long)jiffies * (1000000000 / HZ); -} - static int __init init_udelay(void) { diff --git a/arch/h8300/kernel/time.c b/arch/h8300/kernel/time.c index 8abab3bc2b6f..d1ef615ba895 100644 --- a/arch/h8300/kernel/time.c +++ b/arch/h8300/kernel/time.c @@ -118,9 +118,3 @@ int do_settimeofday(struct timespec *tv) } EXPORT_SYMBOL(do_settimeofday); - -unsigned long long sched_clock(void) -{ - return (unsigned long long)jiffies * (1000000000 / HZ); - -} diff --git a/arch/m32r/kernel/time.c b/arch/m32r/kernel/time.c index a09038282c78..3858c9f39ba5 100644 --- a/arch/m32r/kernel/time.c +++ b/arch/m32r/kernel/time.c @@ -286,11 +286,3 @@ void __init time_init(void) #error no chip configuration #endif } - -/* - * Scheduler clock - returns current time in nanosec units. - */ -unsigned long long sched_clock(void) -{ - return (unsigned long long)jiffies * (1000000000 / HZ); -} diff --git a/arch/m68k/kernel/time.c b/arch/m68k/kernel/time.c index 2a599c3ed787..4c065f9ceffc 100644 --- a/arch/m68k/kernel/time.c +++ b/arch/m68k/kernel/time.c @@ -159,12 +159,3 @@ int do_settimeofday(struct timespec *tv) } EXPORT_SYMBOL(do_settimeofday); - -/* - * Scheduler clock - returns current time in ns units. - */ -unsigned long long sched_clock(void) -{ - return (unsigned long long)jiffies*(1000000000/HZ); -} - diff --git a/arch/m68knommu/kernel/time.c b/arch/m68knommu/kernel/time.c index 11ea217ed5cf..467053da2d08 100644 --- a/arch/m68knommu/kernel/time.c +++ b/arch/m68knommu/kernel/time.c @@ -174,13 +174,4 @@ int do_settimeofday(struct timespec *tv) clock_was_set(); return 0; } - -/* - * Scheduler clock - returns current time in nanosec units. - */ -unsigned long long sched_clock(void) -{ - return (unsigned long long)jiffies * (1000000000 / HZ); -} - EXPORT_SYMBOL(do_settimeofday); diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c index 8aa544f73a5e..545fcbc8cea2 100644 --- a/arch/mips/kernel/time.c +++ b/arch/mips/kernel/time.c @@ -455,8 +455,3 @@ EXPORT_SYMBOL(rtc_lock); EXPORT_SYMBOL(to_tm); EXPORT_SYMBOL(rtc_mips_set_time); EXPORT_SYMBOL(rtc_mips_get_time); - -unsigned long long sched_clock(void) -{ - return (unsigned long long)jiffies*(1000000000/HZ); -} diff --git a/arch/parisc/kernel/time.c b/arch/parisc/kernel/time.c index bad7d1eb62b9..5f1b51af06a9 100644 --- a/arch/parisc/kernel/time.c +++ b/arch/parisc/kernel/time.c @@ -288,17 +288,6 @@ do_settimeofday (struct timespec *tv) } EXPORT_SYMBOL(do_settimeofday); -/* - * XXX: We can do better than this. - * Returns nanoseconds - */ - -unsigned long long sched_clock(void) -{ - return (unsigned long long)jiffies * (1000000000 / HZ); -} - - void __init start_cpu_itimer(void) { unsigned int cpu = smp_processor_id(); diff --git a/arch/sh/kernel/time.c b/arch/sh/kernel/time.c index c206c9504c4b..d47e775962e9 100644 --- a/arch/sh/kernel/time.c +++ b/arch/sh/kernel/time.c @@ -41,14 +41,6 @@ static int null_rtc_set_time(const time_t secs) void (*rtc_sh_get_time)(struct timespec *) = null_rtc_get_time; int (*rtc_sh_set_time)(const time_t) = null_rtc_set_time; -/* - * Scheduler clock - returns current time in nanosec units. - */ -unsigned long long __attribute__ ((weak)) sched_clock(void) -{ - return (unsigned long long)jiffies * (1000000000 / HZ); -} - #ifndef CONFIG_GENERIC_TIME void do_gettimeofday(struct timeval *tv) { diff --git a/arch/sh64/kernel/time.c b/arch/sh64/kernel/time.c index 9c4a38a8698c..390b40de7cef 100644 --- a/arch/sh64/kernel/time.c +++ b/arch/sh64/kernel/time.c @@ -579,12 +579,3 @@ void enter_deep_standby(void) asm __volatile__ ("nop"); panic("Unexpected wakeup!\n"); } - -/* - * Scheduler clock - returns current time in nanosec units. - */ -unsigned long long sched_clock(void) -{ - return (unsigned long long)jiffies * (1000000000 / HZ); -} - diff --git a/arch/sparc/kernel/time.c b/arch/sparc/kernel/time.c index 2fcce000d877..9bb1240aaf8a 100644 --- a/arch/sparc/kernel/time.c +++ b/arch/sparc/kernel/time.c @@ -436,15 +436,6 @@ static inline unsigned long do_gettimeoffset(void) return (*master_l10_counter >> 10) & 0x1fffff; } -/* - * Returns nanoseconds - * XXX This is a suboptimal implementation. - */ -unsigned long long sched_clock(void) -{ - return (unsigned long long)jiffies * (1000000000 / HZ); -} - /* Ok, my cute asm atomicity trick doesn't work anymore. * There are just too many variables that need to be protected * now (both members of xtime, et al.) diff --git a/arch/v850/kernel/time.c b/arch/v850/kernel/time.c index cd06f47c0ea7..486e3a441c86 100644 --- a/arch/v850/kernel/time.c +++ b/arch/v850/kernel/time.c @@ -27,14 +27,6 @@ #define TICK_SIZE (tick_nsec / 1000) -/* - * Scheduler clock - returns current time in nanosec units. - */ -unsigned long long sched_clock(void) -{ - return (unsigned long long)jiffies * (1000000000 / HZ); -} - /* * timer_interrupt() needs to keep up the real-time clock, * as well as call the "do_timer()" routine every clocktick diff --git a/arch/xtensa/kernel/time.c b/arch/xtensa/kernel/time.c index a350431363a0..22949be4a5d8 100644 --- a/arch/xtensa/kernel/time.c +++ b/arch/xtensa/kernel/time.c @@ -38,15 +38,6 @@ unsigned long ccount_nsec; /* nsec per ccount increment */ unsigned int last_ccount_stamp; static long last_rtc_update = 0; -/* - * Scheduler clock - returns current tim in nanosec units. - */ - -unsigned long long sched_clock(void) -{ - return (unsigned long long)jiffies * (1000000000 / HZ); -} - static irqreturn_t timer_interrupt(int irq, void *dev_id); static struct irqaction timer_irqaction = { .handler = timer_interrupt, -- cgit v1.2.3 From 3de3af130b75a79c7381573e5ea69cb59502023f Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Sat, 10 Feb 2007 01:45:52 -0800 Subject: [PATCH] Remove unnecessary memset(0) calls after kzalloc() calls. Delete the few remaining unnecessary calls to memset(0) after a call to kzalloc(). Signed-off-by: Robert P. J. Day Cc: Andi Kleen Cc: Dmitry Torokhov Cc: Adam Belay Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86_64/kernel/mce_amd.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/mce_amd.c b/arch/x86_64/kernel/mce_amd.c index fa09debad4b7..93c707257637 100644 --- a/arch/x86_64/kernel/mce_amd.c +++ b/arch/x86_64/kernel/mce_amd.c @@ -401,7 +401,6 @@ static __cpuinit int allocate_threshold_blocks(unsigned int cpu, b = kzalloc(sizeof(struct threshold_block), GFP_KERNEL); if (!b) return -ENOMEM; - memset(b, 0, sizeof(struct threshold_block)); b->block = block; b->bank = bank; @@ -490,7 +489,6 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank) err = -ENOMEM; goto out; } - memset(b, 0, sizeof(struct threshold_bank)); kobject_set_name(&b->kobj, "threshold_bank%i", bank); b->kobj.parent = &per_cpu(device_mce, cpu).kobj; -- cgit v1.2.3 From b653d081c17e26101980c858a9808740533b78b4 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Sat, 10 Feb 2007 01:45:54 -0800 Subject: [PATCH] proc: remove useless (and buggy) ->nlink settings Bug: pnx8550 code creates directory but resets ->nlink to 1. create_proc_entry() et al will correctly set ->nlink for you. Signed-off-by: Alexey Dobriyan Cc: Ralf Baechle Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Jeff Dike Cc: Corey Minyard Cc: Alan Cox Cc: Kyle McMartin Cc: Martin Schwidefsky Cc: Greg KH Cc: Ingo Molnar Cc: Thomas Gleixner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/mips/philips/pnx8550/common/proc.c | 7 +------ arch/powerpc/kernel/proc_ppc64.c | 1 - arch/powerpc/kernel/rtas_flash.c | 1 - arch/powerpc/platforms/iseries/mf.c | 4 ---- arch/powerpc/platforms/pseries/reconfig.c | 1 - arch/um/drivers/ubd_kern.c | 1 - 6 files changed, 1 insertion(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/mips/philips/pnx8550/common/proc.c b/arch/mips/philips/pnx8550/common/proc.c index 72a016767e09..3f097558ef13 100644 --- a/arch/mips/philips/pnx8550/common/proc.c +++ b/arch/mips/philips/pnx8550/common/proc.c @@ -79,10 +79,7 @@ static int pnx8550_proc_init( void ) // Create /proc/pnx8550 pnx8550_dir = create_proc_entry("pnx8550", S_IFDIR|S_IRUGO, NULL); - if (pnx8550_dir){ - pnx8550_dir->nlink = 1; - } - else { + if (!pnx8550_dir) { printk(KERN_ERR "Can't create pnx8550 proc dir\n"); return -1; } @@ -90,7 +87,6 @@ static int pnx8550_proc_init( void ) // Create /proc/pnx8550/timers pnx8550_timers = create_proc_entry("timers", S_IFREG|S_IRUGO, pnx8550_dir ); if (pnx8550_timers){ - pnx8550_timers->nlink = 1; pnx8550_timers->read_proc = pnx8550_timers_read; } else { @@ -100,7 +96,6 @@ static int pnx8550_proc_init( void ) // Create /proc/pnx8550/registers pnx8550_registers = create_proc_entry("registers", S_IFREG|S_IRUGO, pnx8550_dir ); if (pnx8550_registers){ - pnx8550_registers->nlink = 1; pnx8550_registers->read_proc = pnx8550_registers_read; } else { diff --git a/arch/powerpc/kernel/proc_ppc64.c b/arch/powerpc/kernel/proc_ppc64.c index dd7001cacf75..3d437c32546e 100644 --- a/arch/powerpc/kernel/proc_ppc64.c +++ b/arch/powerpc/kernel/proc_ppc64.c @@ -71,7 +71,6 @@ static int __init proc_ppc64_init(void) pde = create_proc_entry("ppc64/systemcfg", S_IFREG|S_IRUGO, NULL); if (!pde) return 1; - pde->nlink = 1; pde->data = vdso_data; pde->size = PAGE_SIZE; pde->proc_fops = &page_map_fops; diff --git a/arch/powerpc/kernel/rtas_flash.c b/arch/powerpc/kernel/rtas_flash.c index 0c4fcd34bfe5..65e4ebe8db31 100644 --- a/arch/powerpc/kernel/rtas_flash.c +++ b/arch/powerpc/kernel/rtas_flash.c @@ -708,7 +708,6 @@ static struct proc_dir_entry *create_flash_pde(const char *filename, ent = create_proc_entry(filename, S_IRUSR | S_IWUSR, NULL); if (ent != NULL) { - ent->nlink = 1; ent->proc_fops = fops; ent->owner = THIS_MODULE; } diff --git a/arch/powerpc/platforms/iseries/mf.c b/arch/powerpc/platforms/iseries/mf.c index 1ad0e4aaad1a..90d3d49f713e 100644 --- a/arch/powerpc/platforms/iseries/mf.c +++ b/arch/powerpc/platforms/iseries/mf.c @@ -1253,7 +1253,6 @@ static int __init mf_proc_init(void) ent = create_proc_entry("cmdline", S_IFREG|S_IRUSR|S_IWUSR, mf); if (!ent) return 1; - ent->nlink = 1; ent->data = (void *)(long)i; ent->read_proc = proc_mf_dump_cmdline; ent->write_proc = proc_mf_change_cmdline; @@ -1264,7 +1263,6 @@ static int __init mf_proc_init(void) ent = create_proc_entry("vmlinux", S_IFREG|S_IWUSR, mf); if (!ent) return 1; - ent->nlink = 1; ent->data = (void *)(long)i; ent->proc_fops = &proc_vmlinux_operations; } @@ -1272,7 +1270,6 @@ static int __init mf_proc_init(void) ent = create_proc_entry("side", S_IFREG|S_IRUSR|S_IWUSR, mf_proc_root); if (!ent) return 1; - ent->nlink = 1; ent->data = (void *)0; ent->read_proc = proc_mf_dump_side; ent->write_proc = proc_mf_change_side; @@ -1280,7 +1277,6 @@ static int __init mf_proc_init(void) ent = create_proc_entry("src", S_IFREG|S_IRUSR|S_IWUSR, mf_proc_root); if (!ent) return 1; - ent->nlink = 1; ent->data = (void *)0; ent->read_proc = proc_mf_dump_src; ent->write_proc = proc_mf_change_src; diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c index 4ad33e41b008..789a5e99aefd 100644 --- a/arch/powerpc/platforms/pseries/reconfig.c +++ b/arch/powerpc/platforms/pseries/reconfig.c @@ -513,7 +513,6 @@ static int proc_ppc64_create_ofdt(void) ent = create_proc_entry("ppc64/ofdt", S_IWUSR, NULL); if (ent) { - ent->nlink = 1; ent->data = NULL; ent->size = 0; ent->proc_fops = &ofdt_fops; diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c index da0badcd7551..f98d26e51381 100644 --- a/arch/um/drivers/ubd_kern.c +++ b/arch/um/drivers/ubd_kern.c @@ -235,7 +235,6 @@ static void make_ide_entries(char *dev_name) ent = create_proc_entry("media", S_IFREG|S_IRUGO, dir); if(!ent) return; - ent->nlink = 1; ent->data = NULL; ent->read_proc = proc_ide_read_media; ent->write_proc = NULL; -- cgit v1.2.3 From d4d23add3abcd18d8021b99f230df608ccb2f007 Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Sat, 10 Feb 2007 01:46:00 -0800 Subject: [PATCH] Common compat_sys_sysinfo I noticed that almost all architectures implemented exactly the same sys32_sysinfo... except parisc, where a bug was to be found in handling of the uptime. So let's remove a whole whack of code for fun and profit. Cribbed compat_sys_sysinfo from x86_64's implementation, since I figured it would be the best tested. This patch incorporates Arnd's suggestion of not using set_fs/get_fs, but instead extracting out the common code from sys_sysinfo. Cc: Christoph Hellwig Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ia64/ia32/ia32_entry.S | 2 +- arch/ia64/ia32/sys_ia32.c | 68 -------------------------------------- arch/mips/kernel/linux32.c | 44 ------------------------ arch/mips/kernel/scall64-n32.S | 2 +- arch/mips/kernel/scall64-o32.S | 2 +- arch/parisc/kernel/sys_parisc32.c | 64 ----------------------------------- arch/parisc/kernel/syscall_table.S | 2 +- arch/powerpc/kernel/sys_ppc32.c | 67 ------------------------------------- arch/s390/kernel/compat_linux.c | 45 ------------------------- arch/s390/kernel/compat_wrapper.S | 6 ++-- arch/s390/kernel/syscalls.S | 2 +- arch/sparc64/kernel/sys_sparc32.c | 64 ----------------------------------- arch/sparc64/kernel/systbls.S | 2 +- arch/x86_64/ia32/ia32entry.S | 2 +- arch/x86_64/ia32/sys_ia32.c | 66 ------------------------------------ 15 files changed, 10 insertions(+), 428 deletions(-) (limited to 'arch') diff --git a/arch/ia64/ia32/ia32_entry.S b/arch/ia64/ia32/ia32_entry.S index a32cd59b81ed..687e5fdc9683 100644 --- a/arch/ia64/ia32/ia32_entry.S +++ b/arch/ia64/ia32/ia32_entry.S @@ -326,7 +326,7 @@ ia32_syscall_table: data8 sys_ni_syscall data8 compat_sys_wait4 data8 sys_swapoff /* 115 */ - data8 sys32_sysinfo + data8 compat_sys_sysinfo data8 sys32_ipc data8 sys_fsync data8 sys32_sigreturn diff --git a/arch/ia64/ia32/sys_ia32.c b/arch/ia64/ia32/sys_ia32.c index 957681c39ad9..d430d36ae49d 100644 --- a/arch/ia64/ia32/sys_ia32.c +++ b/arch/ia64/ia32/sys_ia32.c @@ -2209,74 +2209,6 @@ sys32_fstat64 (unsigned int fd, struct stat64 __user *statbuf) return ret; } -struct sysinfo32 { - s32 uptime; - u32 loads[3]; - u32 totalram; - u32 freeram; - u32 sharedram; - u32 bufferram; - u32 totalswap; - u32 freeswap; - u16 procs; - u16 pad; - u32 totalhigh; - u32 freehigh; - u32 mem_unit; - char _f[8]; -}; - -asmlinkage long -sys32_sysinfo (struct sysinfo32 __user *info) -{ - struct sysinfo s; - long ret, err; - int bitcount = 0; - mm_segment_t old_fs = get_fs(); - - set_fs(KERNEL_DS); - ret = sys_sysinfo((struct sysinfo __user *) &s); - set_fs(old_fs); - /* Check to see if any memory value is too large for 32-bit and - * scale down if needed. - */ - if ((s.totalram >> 32) || (s.totalswap >> 32)) { - while (s.mem_unit < PAGE_SIZE) { - s.mem_unit <<= 1; - bitcount++; - } - s.totalram >>= bitcount; - s.freeram >>= bitcount; - s.sharedram >>= bitcount; - s.bufferram >>= bitcount; - s.totalswap >>= bitcount; - s.freeswap >>= bitcount; - s.totalhigh >>= bitcount; - s.freehigh >>= bitcount; - } - - if (!access_ok(VERIFY_WRITE, info, sizeof(*info))) - return -EFAULT; - - err = __put_user(s.uptime, &info->uptime); - err |= __put_user(s.loads[0], &info->loads[0]); - err |= __put_user(s.loads[1], &info->loads[1]); - err |= __put_user(s.loads[2], &info->loads[2]); - err |= __put_user(s.totalram, &info->totalram); - err |= __put_user(s.freeram, &info->freeram); - err |= __put_user(s.sharedram, &info->sharedram); - err |= __put_user(s.bufferram, &info->bufferram); - err |= __put_user(s.totalswap, &info->totalswap); - err |= __put_user(s.freeswap, &info->freeswap); - err |= __put_user(s.procs, &info->procs); - err |= __put_user (s.totalhigh, &info->totalhigh); - err |= __put_user (s.freehigh, &info->freehigh); - err |= __put_user (s.mem_unit, &info->mem_unit); - if (err) - return -EFAULT; - return ret; -} - asmlinkage long sys32_sched_rr_get_interval (pid_t pid, struct compat_timespec __user *interval) { diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c index 0b8ce59429a8..ca7ad78f4def 100644 --- a/arch/mips/kernel/linux32.c +++ b/arch/mips/kernel/linux32.c @@ -193,50 +193,6 @@ sysn32_waitid(int which, compat_pid_t pid, return ret; } -struct sysinfo32 { - s32 uptime; - u32 loads[3]; - u32 totalram; - u32 freeram; - u32 sharedram; - u32 bufferram; - u32 totalswap; - u32 freeswap; - u16 procs; - u32 totalhigh; - u32 freehigh; - u32 mem_unit; - char _f[8]; -}; - -asmlinkage int sys32_sysinfo(struct sysinfo32 __user *info) -{ - struct sysinfo s; - int ret, err; - mm_segment_t old_fs = get_fs (); - - set_fs (KERNEL_DS); - ret = sys_sysinfo((struct sysinfo __user *)&s); - set_fs (old_fs); - err = put_user (s.uptime, &info->uptime); - err |= __put_user (s.loads[0], &info->loads[0]); - err |= __put_user (s.loads[1], &info->loads[1]); - err |= __put_user (s.loads[2], &info->loads[2]); - err |= __put_user (s.totalram, &info->totalram); - err |= __put_user (s.freeram, &info->freeram); - err |= __put_user (s.sharedram, &info->sharedram); - err |= __put_user (s.bufferram, &info->bufferram); - err |= __put_user (s.totalswap, &info->totalswap); - err |= __put_user (s.freeswap, &info->freeswap); - err |= __put_user (s.procs, &info->procs); - err |= __put_user (s.totalhigh, &info->totalhigh); - err |= __put_user (s.freehigh, &info->freehigh); - err |= __put_user (s.mem_unit, &info->mem_unit); - if (err) - return -EFAULT; - return ret; -} - #define RLIM_INFINITY32 0x7fffffff #define RESOURCE32(x) ((x > RLIM_INFINITY32) ? RLIM_INFINITY32 : x) diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index 39add2341aa2..ee8802b59758 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -217,7 +217,7 @@ EXPORT(sysn32_call_table) PTR sys32_gettimeofday PTR compat_sys_getrlimit /* 6095 */ PTR compat_sys_getrusage - PTR sys32_sysinfo + PTR compat_sys_sysinfo PTR compat_sys_times PTR sys32_ptrace PTR sys_getuid /* 6100 */ diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index c58b8e0105ea..c5f590ca99b0 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -321,7 +321,7 @@ sys_call_table: PTR sys_ni_syscall /* sys_vm86 */ PTR compat_sys_wait4 PTR sys_swapoff /* 4115 */ - PTR sys32_sysinfo + PTR compat_sys_sysinfo PTR sys32_ipc PTR sys_fsync PTR sys32_sigreturn diff --git a/arch/parisc/kernel/sys_parisc32.c b/arch/parisc/kernel/sys_parisc32.c index 29be4377aca6..ce3245f87fdd 100644 --- a/arch/parisc/kernel/sys_parisc32.c +++ b/arch/parisc/kernel/sys_parisc32.c @@ -579,70 +579,6 @@ asmlinkage int sys32_sendfile64(int out_fd, int in_fd, compat_loff_t __user *off } -struct sysinfo32 { - s32 uptime; - u32 loads[3]; - u32 totalram; - u32 freeram; - u32 sharedram; - u32 bufferram; - u32 totalswap; - u32 freeswap; - unsigned short procs; - u32 totalhigh; - u32 freehigh; - u32 mem_unit; - char _f[12]; -}; - -/* We used to call sys_sysinfo and translate the result. But sys_sysinfo - * undoes the good work done elsewhere, and rather than undoing the - * damage, I decided to just duplicate the code from sys_sysinfo here. - */ - -asmlinkage int sys32_sysinfo(struct sysinfo32 __user *info) -{ - struct sysinfo val; - int err; - unsigned long seq; - - /* We don't need a memset here because we copy the - * struct to userspace once element at a time. - */ - - do { - seq = read_seqbegin(&xtime_lock); - val.uptime = jiffies / HZ; - - val.loads[0] = avenrun[0] << (SI_LOAD_SHIFT - FSHIFT); - val.loads[1] = avenrun[1] << (SI_LOAD_SHIFT - FSHIFT); - val.loads[2] = avenrun[2] << (SI_LOAD_SHIFT - FSHIFT); - - val.procs = nr_threads; - } while (read_seqretry(&xtime_lock, seq)); - - - si_meminfo(&val); - si_swapinfo(&val); - - err = put_user (val.uptime, &info->uptime); - err |= __put_user (val.loads[0], &info->loads[0]); - err |= __put_user (val.loads[1], &info->loads[1]); - err |= __put_user (val.loads[2], &info->loads[2]); - err |= __put_user (val.totalram, &info->totalram); - err |= __put_user (val.freeram, &info->freeram); - err |= __put_user (val.sharedram, &info->sharedram); - err |= __put_user (val.bufferram, &info->bufferram); - err |= __put_user (val.totalswap, &info->totalswap); - err |= __put_user (val.freeswap, &info->freeswap); - err |= __put_user (val.procs, &info->procs); - err |= __put_user (val.totalhigh, &info->totalhigh); - err |= __put_user (val.freehigh, &info->freehigh); - err |= __put_user (val.mem_unit, &info->mem_unit); - return err ? -EFAULT : 0; -} - - /* lseek() needs a wrapper because 'offset' can be negative, but the top * half of the argument has been zeroed by syscall.S. */ diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S index 701d66a596e8..be8eb9a0d24a 100644 --- a/arch/parisc/kernel/syscall_table.S +++ b/arch/parisc/kernel/syscall_table.S @@ -197,7 +197,7 @@ /* struct rusage contains longs... */ ENTRY_COMP(wait4) ENTRY_SAME(swapoff) /* 115 */ - ENTRY_DIFF(sysinfo) + ENTRY_COMP(sysinfo) ENTRY_SAME(shutdown) ENTRY_SAME(fsync) ENTRY_SAME(madvise) diff --git a/arch/powerpc/kernel/sys_ppc32.c b/arch/powerpc/kernel/sys_ppc32.c index 03a2a2f30d66..673e8d9df7f5 100644 --- a/arch/powerpc/kernel/sys_ppc32.c +++ b/arch/powerpc/kernel/sys_ppc32.c @@ -198,73 +198,6 @@ static inline long put_tv32(struct compat_timeval __user *o, struct timeval *i) __put_user(i->tv_usec, &o->tv_usec))); } -struct sysinfo32 { - s32 uptime; - u32 loads[3]; - u32 totalram; - u32 freeram; - u32 sharedram; - u32 bufferram; - u32 totalswap; - u32 freeswap; - unsigned short procs; - unsigned short pad; - u32 totalhigh; - u32 freehigh; - u32 mem_unit; - char _f[20-2*sizeof(int)-sizeof(int)]; -}; - -asmlinkage long compat_sys_sysinfo(struct sysinfo32 __user *info) -{ - struct sysinfo s; - int ret, err; - int bitcount=0; - mm_segment_t old_fs = get_fs (); - - /* The __user cast is valid due to set_fs() */ - set_fs (KERNEL_DS); - ret = sys_sysinfo((struct sysinfo __user *)&s); - set_fs (old_fs); - - /* Check to see if any memory value is too large for 32-bit and - * scale down if needed. - */ - if ((s.totalram >> 32) || (s.totalswap >> 32)) { - while (s.mem_unit < PAGE_SIZE) { - s.mem_unit <<= 1; - bitcount++; - } - s.totalram >>=bitcount; - s.freeram >>= bitcount; - s.sharedram >>= bitcount; - s.bufferram >>= bitcount; - s.totalswap >>= bitcount; - s.freeswap >>= bitcount; - s.totalhigh >>= bitcount; - s.freehigh >>= bitcount; - } - - err = put_user (s.uptime, &info->uptime); - err |= __put_user (s.loads[0], &info->loads[0]); - err |= __put_user (s.loads[1], &info->loads[1]); - err |= __put_user (s.loads[2], &info->loads[2]); - err |= __put_user (s.totalram, &info->totalram); - err |= __put_user (s.freeram, &info->freeram); - err |= __put_user (s.sharedram, &info->sharedram); - err |= __put_user (s.bufferram, &info->bufferram); - err |= __put_user (s.totalswap, &info->totalswap); - err |= __put_user (s.freeswap, &info->freeswap); - err |= __put_user (s.procs, &info->procs); - err |= __put_user (s.totalhigh, &info->totalhigh); - err |= __put_user (s.freehigh, &info->freehigh); - err |= __put_user (s.mem_unit, &info->mem_unit); - if (err) - return -EFAULT; - - return ret; -} - diff --git a/arch/s390/kernel/compat_linux.c b/arch/s390/kernel/compat_linux.c index 666bb6daa148..664c669b1856 100644 --- a/arch/s390/kernel/compat_linux.c +++ b/arch/s390/kernel/compat_linux.c @@ -398,51 +398,6 @@ int cp_compat_stat(struct kstat *stat, struct compat_stat __user *statbuf) return err; } -struct sysinfo32 { - s32 uptime; - u32 loads[3]; - u32 totalram; - u32 freeram; - u32 sharedram; - u32 bufferram; - u32 totalswap; - u32 freeswap; - unsigned short procs; - unsigned short pads; - u32 totalhigh; - u32 freehigh; - unsigned int mem_unit; - char _f[8]; -}; - -asmlinkage long sys32_sysinfo(struct sysinfo32 __user *info) -{ - struct sysinfo s; - int ret, err; - mm_segment_t old_fs = get_fs (); - - set_fs (KERNEL_DS); - ret = sys_sysinfo((struct sysinfo __force __user *) &s); - set_fs (old_fs); - err = put_user (s.uptime, &info->uptime); - err |= __put_user (s.loads[0], &info->loads[0]); - err |= __put_user (s.loads[1], &info->loads[1]); - err |= __put_user (s.loads[2], &info->loads[2]); - err |= __put_user (s.totalram, &info->totalram); - err |= __put_user (s.freeram, &info->freeram); - err |= __put_user (s.sharedram, &info->sharedram); - err |= __put_user (s.bufferram, &info->bufferram); - err |= __put_user (s.totalswap, &info->totalswap); - err |= __put_user (s.freeswap, &info->freeswap); - err |= __put_user (s.procs, &info->procs); - err |= __put_user (s.totalhigh, &info->totalhigh); - err |= __put_user (s.freehigh, &info->freehigh); - err |= __put_user (s.mem_unit, &info->mem_unit); - if (err) - return -EFAULT; - return ret; -} - asmlinkage long sys32_sched_rr_get_interval(compat_pid_t pid, struct compat_timespec __user *interval) { diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S index 71e54ef0931e..97901296894e 100644 --- a/arch/s390/kernel/compat_wrapper.S +++ b/arch/s390/kernel/compat_wrapper.S @@ -517,10 +517,10 @@ sys32_swapoff_wrapper: llgtr %r2,%r2 # const char * jg sys_swapoff # branch to system call - .globl sys32_sysinfo_wrapper -sys32_sysinfo_wrapper: + .globl compat_sys_sysinfo_wrapper +compat_sys_sysinfo_wrapper: llgtr %r2,%r2 # struct sysinfo_emu31 * - jg sys32_sysinfo # branch to system call + jg compat_sys_sysinfo # branch to system call .globl sys32_ipc_wrapper sys32_ipc_wrapper: diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S index a4ceae3dbcf1..a52c44455bf0 100644 --- a/arch/s390/kernel/syscalls.S +++ b/arch/s390/kernel/syscalls.S @@ -124,7 +124,7 @@ NI_SYSCALL /* old "idle" system call */ NI_SYSCALL /* vm86old for i386 */ SYSCALL(sys_wait4,sys_wait4,compat_sys_wait4_wrapper) SYSCALL(sys_swapoff,sys_swapoff,sys32_swapoff_wrapper) /* 115 */ -SYSCALL(sys_sysinfo,sys_sysinfo,sys32_sysinfo_wrapper) +SYSCALL(sys_sysinfo,sys_sysinfo,compat_sys_sysinfo_wrapper) SYSCALL(sys_ipc,sys_ipc,sys32_ipc_wrapper) SYSCALL(sys_fsync,sys_fsync,sys32_fsync_wrapper) SYSCALL(sys_sigreturn_glue,sys_sigreturn_glue,sys32_sigreturn_glue) diff --git a/arch/sparc64/kernel/sys_sparc32.c b/arch/sparc64/kernel/sys_sparc32.c index e27cb71bd8e2..7876a0226285 100644 --- a/arch/sparc64/kernel/sys_sparc32.c +++ b/arch/sparc64/kernel/sys_sparc32.c @@ -459,70 +459,6 @@ asmlinkage long compat_sys_sysfs(int option, u32 arg1, u32 arg2) return sys_sysfs(option, arg1, arg2); } -struct sysinfo32 { - s32 uptime; - u32 loads[3]; - u32 totalram; - u32 freeram; - u32 sharedram; - u32 bufferram; - u32 totalswap; - u32 freeswap; - unsigned short procs; - unsigned short pad; - u32 totalhigh; - u32 freehigh; - u32 mem_unit; - char _f[20-2*sizeof(int)-sizeof(int)]; -}; - -asmlinkage long sys32_sysinfo(struct sysinfo32 __user *info) -{ - struct sysinfo s; - int ret, err; - int bitcount = 0; - mm_segment_t old_fs = get_fs (); - - set_fs(KERNEL_DS); - ret = sys_sysinfo((struct sysinfo __user *) &s); - set_fs(old_fs); - /* Check to see if any memory value is too large for 32-bit and - * scale down if needed. - */ - if ((s.totalram >> 32) || (s.totalswap >> 32)) { - while (s.mem_unit < PAGE_SIZE) { - s.mem_unit <<= 1; - bitcount++; - } - s.totalram >>= bitcount; - s.freeram >>= bitcount; - s.sharedram >>= bitcount; - s.bufferram >>= bitcount; - s.totalswap >>= bitcount; - s.freeswap >>= bitcount; - s.totalhigh >>= bitcount; - s.freehigh >>= bitcount; - } - - err = put_user (s.uptime, &info->uptime); - err |= __put_user (s.loads[0], &info->loads[0]); - err |= __put_user (s.loads[1], &info->loads[1]); - err |= __put_user (s.loads[2], &info->loads[2]); - err |= __put_user (s.totalram, &info->totalram); - err |= __put_user (s.freeram, &info->freeram); - err |= __put_user (s.sharedram, &info->sharedram); - err |= __put_user (s.bufferram, &info->bufferram); - err |= __put_user (s.totalswap, &info->totalswap); - err |= __put_user (s.freeswap, &info->freeswap); - err |= __put_user (s.procs, &info->procs); - err |= __put_user (s.totalhigh, &info->totalhigh); - err |= __put_user (s.freehigh, &info->freehigh); - err |= __put_user (s.mem_unit, &info->mem_unit); - if (err) - return -EFAULT; - return ret; -} - asmlinkage long compat_sys_sched_rr_get_interval(compat_pid_t pid, struct compat_timespec __user *interval) { struct timespec t; diff --git a/arch/sparc64/kernel/systbls.S b/arch/sparc64/kernel/systbls.S index 9a8026797ac0..948b7d2d5874 100644 --- a/arch/sparc64/kernel/systbls.S +++ b/arch/sparc64/kernel/systbls.S @@ -61,7 +61,7 @@ sys_call_table32: .word sys32_epoll_wait, sys32_ioprio_set, sys_getppid, sys32_sigaction, sys_sgetmask /*200*/ .word sys32_ssetmask, sys_sigsuspend, compat_sys_newlstat, sys_uselib, compat_sys_old_readdir .word sys32_readahead, sys32_socketcall, sys32_syslog, sys32_lookup_dcookie, sys32_fadvise64 -/*210*/ .word sys32_fadvise64_64, sys32_tgkill, sys32_waitpid, sys_swapoff, sys32_sysinfo +/*210*/ .word sys32_fadvise64_64, sys32_tgkill, sys32_waitpid, sys_swapoff, compat_sys_sysinfo .word sys32_ipc, sys32_sigreturn, sys_clone, sys32_ioprio_get, compat_sys_adjtimex /*220*/ .word sys32_sigprocmask, sys_ni_syscall, sys32_delete_module, sys_ni_syscall, sys32_getpgid .word sys32_bdflush, sys32_sysfs, sys_nis_syscall, sys32_setfsuid16, sys32_setfsgid16 diff --git a/arch/x86_64/ia32/ia32entry.S b/arch/x86_64/ia32/ia32entry.S index b4aa875e175b..5f32cf4de5fb 100644 --- a/arch/x86_64/ia32/ia32entry.S +++ b/arch/x86_64/ia32/ia32entry.S @@ -515,7 +515,7 @@ ia32_sys_call_table: .quad sys32_vm86_warning /* vm86old */ .quad compat_sys_wait4 .quad sys_swapoff /* 115 */ - .quad sys32_sysinfo + .quad compat_sys_sysinfo .quad sys32_ipc .quad sys_fsync .quad stub32_sigreturn diff --git a/arch/x86_64/ia32/sys_ia32.c b/arch/x86_64/ia32/sys_ia32.c index c9bac3af29d6..200fdde18d96 100644 --- a/arch/x86_64/ia32/sys_ia32.c +++ b/arch/x86_64/ia32/sys_ia32.c @@ -523,72 +523,6 @@ sys32_sysfs(int option, u32 arg1, u32 arg2) return sys_sysfs(option, arg1, arg2); } -struct sysinfo32 { - s32 uptime; - u32 loads[3]; - u32 totalram; - u32 freeram; - u32 sharedram; - u32 bufferram; - u32 totalswap; - u32 freeswap; - unsigned short procs; - unsigned short pad; - u32 totalhigh; - u32 freehigh; - u32 mem_unit; - char _f[20-2*sizeof(u32)-sizeof(int)]; -}; - -asmlinkage long -sys32_sysinfo(struct sysinfo32 __user *info) -{ - struct sysinfo s; - int ret; - mm_segment_t old_fs = get_fs (); - int bitcount = 0; - - set_fs (KERNEL_DS); - ret = sys_sysinfo((struct sysinfo __user *)&s); - set_fs (old_fs); - - /* Check to see if any memory value is too large for 32-bit and scale - * down if needed - */ - if ((s.totalram >> 32) || (s.totalswap >> 32)) { - while (s.mem_unit < PAGE_SIZE) { - s.mem_unit <<= 1; - bitcount++; - } - s.totalram >>= bitcount; - s.freeram >>= bitcount; - s.sharedram >>= bitcount; - s.bufferram >>= bitcount; - s.totalswap >>= bitcount; - s.freeswap >>= bitcount; - s.totalhigh >>= bitcount; - s.freehigh >>= bitcount; - } - - if (!access_ok(VERIFY_WRITE, info, sizeof(struct sysinfo32)) || - __put_user (s.uptime, &info->uptime) || - __put_user (s.loads[0], &info->loads[0]) || - __put_user (s.loads[1], &info->loads[1]) || - __put_user (s.loads[2], &info->loads[2]) || - __put_user (s.totalram, &info->totalram) || - __put_user (s.freeram, &info->freeram) || - __put_user (s.sharedram, &info->sharedram) || - __put_user (s.bufferram, &info->bufferram) || - __put_user (s.totalswap, &info->totalswap) || - __put_user (s.freeswap, &info->freeswap) || - __put_user (s.procs, &info->procs) || - __put_user (s.totalhigh, &info->totalhigh) || - __put_user (s.freehigh, &info->freehigh) || - __put_user (s.mem_unit, &info->mem_unit)) - return -EFAULT; - return 0; -} - asmlinkage long sys32_sched_rr_get_interval(compat_pid_t pid, struct compat_timespec __user *interval) { -- cgit v1.2.3 From 85cc9b11446fb8e2762269cfbc28676bfe2eaa4b Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Sat, 10 Feb 2007 01:46:11 -0800 Subject: [PATCH] sn2: use static ->proc_fops fix-rmmod-read-write-races-in-proc-entries.patch doesn't want dynamically allocated ->proc_fops, because it will set it to NULL at module unload time. Regardless of module status, switch to statically allocated ->proc_fops which leads to simpler code without wrappers. AFAICS, also fix the following bug: "sn_force_interrupt" proc entry set ->write for itself, but was created with 0444 permissions. Change to 0644. Signed-off-by: Alexey Dobriyan Cc: Al Viro Cc: "Eric W. Biederman" Cc: "Luck, Tony" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ia64/sn/kernel/sn2/sn_proc_fs.c | 105 +++++++++++++++++++++-------------- 1 file changed, 62 insertions(+), 43 deletions(-) (limited to 'arch') diff --git a/arch/ia64/sn/kernel/sn2/sn_proc_fs.c b/arch/ia64/sn/kernel/sn2/sn_proc_fs.c index 43ddc2eccb96..62b3e9a496ac 100644 --- a/arch/ia64/sn/kernel/sn2/sn_proc_fs.c +++ b/arch/ia64/sn/kernel/sn2/sn_proc_fs.c @@ -89,61 +89,80 @@ static int coherence_id_open(struct inode *inode, struct file *file) return single_open(file, coherence_id_show, NULL); } -static struct proc_dir_entry -*sn_procfs_create_entry(const char *name, struct proc_dir_entry *parent, - int (*openfunc)(struct inode *, struct file *), - int (*releasefunc)(struct inode *, struct file *), - ssize_t (*write) (struct file *, const char __user *, size_t, loff_t *)) -{ - struct proc_dir_entry *e = create_proc_entry(name, 0444, parent); - - if (e) { - struct file_operations *f; - - f = kzalloc(sizeof(*f), GFP_KERNEL); - if (f) { - f->open = openfunc; - f->read = seq_read; - f->llseek = seq_lseek; - f->release = releasefunc; - f->write = write; - e->proc_fops = f; - } - } - - return e; -} - /* /proc/sgi_sn/sn_topology uses seq_file, see sn_hwperf.c */ extern int sn_topology_open(struct inode *, struct file *); extern int sn_topology_release(struct inode *, struct file *); +static const struct file_operations proc_partition_id_fops = { + .open = partition_id_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static const struct file_operations proc_system_sn_fops = { + .open = system_serial_number_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static const struct file_operations proc_license_id_fops = { + .open = licenseID_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static const struct file_operations proc_sn_force_intr_fops = { + .open = sn_force_interrupt_open, + .read = seq_read, + .write = sn_force_interrupt_write_proc, + .llseek = seq_lseek, + .release = single_release, +}; + +static const struct file_operations proc_coherence_id_fops = { + .open = coherence_id_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static const struct file_operations proc_sn_topo_fops = { + .open = sn_topology_open, + .read = seq_read, + .llseek = seq_lseek, + .release = sn_topology_release, +}; + void register_sn_procfs(void) { static struct proc_dir_entry *sgi_proc_dir = NULL; + struct proc_dir_entry *pde; BUG_ON(sgi_proc_dir != NULL); if (!(sgi_proc_dir = proc_mkdir("sgi_sn", NULL))) return; - sn_procfs_create_entry("partition_id", sgi_proc_dir, - partition_id_open, single_release, NULL); - - sn_procfs_create_entry("system_serial_number", sgi_proc_dir, - system_serial_number_open, single_release, NULL); - - sn_procfs_create_entry("licenseID", sgi_proc_dir, - licenseID_open, single_release, NULL); - - sn_procfs_create_entry("sn_force_interrupt", sgi_proc_dir, - sn_force_interrupt_open, single_release, - sn_force_interrupt_write_proc); - - sn_procfs_create_entry("coherence_id", sgi_proc_dir, - coherence_id_open, single_release, NULL); - - sn_procfs_create_entry("sn_topology", sgi_proc_dir, - sn_topology_open, sn_topology_release, NULL); + pde = create_proc_entry("partition_id", 0444, sgi_proc_dir); + if (pde) + pde->proc_fops = &proc_partition_id_fops; + pde = create_proc_entry("system_serial_number", 0444, sgi_proc_dir); + if (pde) + pde->proc_fops = &proc_system_sn_fops; + pde = create_proc_entry("licenseID", 0444, sgi_proc_dir); + if (pde) + pde->proc_fops = &proc_license_id_fops; + pde = create_proc_entry("sn_force_interrupt", 0644, sgi_proc_dir); + if (pde) + pde->proc_fops = &proc_sn_force_intr_fops; + pde = create_proc_entry("coherence_id", 0444, sgi_proc_dir); + if (pde) + pde->proc_fops = &proc_coherence_id_fops; + pde = create_proc_entry("sn_topology", 0444, sgi_proc_dir); + if (pde) + pde->proc_fops = &proc_sn_topo_fops; } #endif /* CONFIG_PROC_FS */ -- cgit v1.2.3 From cefc8be82403cfc4325e7b9b063f77dc0f34e19e Mon Sep 17 00:00:00 2001 From: Kirill Korotaev Date: Sat, 10 Feb 2007 01:46:18 -0800 Subject: [PATCH] Consolidate bust_spinlocks() Part of long forgotten patch http://groups.google.com/group/fa.linux.kernel/msg/e98e941ce1cf29f6?dmode=source Since then, m32r grabbed two copies. Leave s390 copy because of important absence of CONFIG_VT, but remove references to non-existent timerlist_lock. ia64 also loses timerlist_lock. Signed-off-by: Alexey Dobriyan Acked-by: Martin Schwidefsky Cc: Andi Kleen Cc: "Luck, Tony" Cc: Hirokazu Takata Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/mm/fault.c | 26 -------------------------- arch/ia64/kernel/traps.c | 30 ------------------------------ arch/m32r/mm/fault-nommu.c | 26 -------------------------- arch/m32r/mm/fault.c | 26 -------------------------- arch/s390/mm/fault.c | 4 +--- arch/x86_64/mm/fault.c | 21 --------------------- 6 files changed, 1 insertion(+), 132 deletions(-) (limited to 'arch') diff --git a/arch/i386/mm/fault.c b/arch/i386/mm/fault.c index aaaa4d225f7e..cba9b3894a33 100644 --- a/arch/i386/mm/fault.c +++ b/arch/i386/mm/fault.c @@ -59,32 +59,6 @@ static inline int notify_page_fault(enum die_val val, const char *str, return atomic_notifier_call_chain(¬ify_page_fault_chain, val, &args); } -/* - * Unlock any spinlocks which will prevent us from getting the - * message out - */ -void bust_spinlocks(int yes) -{ - int loglevel_save = console_loglevel; - - if (yes) { - oops_in_progress = 1; - return; - } -#ifdef CONFIG_VT - unblank_screen(); -#endif - oops_in_progress = 0; - /* - * OK, the message is on the console. Now we call printk() - * without oops_in_progress set so that printk will give klogd - * a poke. Hold onto your hats... - */ - console_loglevel = 15; /* NMI oopser may have shut the console up */ - printk(" "); - console_loglevel = loglevel_save; -} - /* * Return EIP plus the CS segment base. The segment limit is also * adjusted, clamped to the kernel/user address space (whichever is diff --git a/arch/ia64/kernel/traps.c b/arch/ia64/kernel/traps.c index ab684747036f..765cbe5ba6ae 100644 --- a/arch/ia64/kernel/traps.c +++ b/arch/ia64/kernel/traps.c @@ -24,8 +24,6 @@ #include #include -extern spinlock_t timerlist_lock; - fpswa_interface_t *fpswa_interface; EXPORT_SYMBOL(fpswa_interface); @@ -53,34 +51,6 @@ trap_init (void) fpswa_interface = __va(ia64_boot_param->fpswa); } -/* - * Unlock any spinlocks which will prevent us from getting the message out (timerlist_lock - * is acquired through the console unblank code) - */ -void -bust_spinlocks (int yes) -{ - int loglevel_save = console_loglevel; - - if (yes) { - oops_in_progress = 1; - return; - } - -#ifdef CONFIG_VT - unblank_screen(); -#endif - oops_in_progress = 0; - /* - * OK, the message is on the console. Now we call printk() without - * oops_in_progress set so that printk will give klogd a poke. Hold onto - * your hats... - */ - console_loglevel = 15; /* NMI oopser may have shut the console up */ - printk(" "); - console_loglevel = loglevel_save; -} - void die (const char *str, struct pt_regs *regs, long err) { diff --git a/arch/m32r/mm/fault-nommu.c b/arch/m32r/mm/fault-nommu.c index 0a09cc01212b..9880abac3f54 100644 --- a/arch/m32r/mm/fault-nommu.c +++ b/arch/m32r/mm/fault-nommu.c @@ -44,32 +44,6 @@ unsigned int tlb_entry_d_dat[NR_CPUS]; #define tlb_entry_d tlb_entry_d_dat[smp_processor_id()] #endif -/* - * Unlock any spinlocks which will prevent us from getting the - * message out - */ -void bust_spinlocks(int yes) -{ - int loglevel_save = console_loglevel; - - if (yes) { - oops_in_progress = 1; - return; - } -#ifdef CONFIG_VT - unblank_screen(); -#endif - oops_in_progress = 0; - /* - * OK, the message is on the console. Now we call printk() - * without oops_in_progress set so that printk will give klogd - * a poke. Hold onto your hats... - */ - console_loglevel = 15; /* NMI oopser may have shut the console up */ - printk(" "); - console_loglevel = loglevel_save; -} - void do_BUG(const char *file, int line) { bust_spinlocks(1); diff --git a/arch/m32r/mm/fault.c b/arch/m32r/mm/fault.c index fc7ccdf829e2..037d58e82fb5 100644 --- a/arch/m32r/mm/fault.c +++ b/arch/m32r/mm/fault.c @@ -49,32 +49,6 @@ unsigned int tlb_entry_d_dat[NR_CPUS]; extern void init_tlb(void); -/* - * Unlock any spinlocks which will prevent us from getting the - * message out - */ -void bust_spinlocks(int yes) -{ - int loglevel_save = console_loglevel; - - if (yes) { - oops_in_progress = 1; - return; - } -#ifdef CONFIG_VT - unblank_screen(); -#endif - oops_in_progress = 0; - /* - * OK, the message is on the console. Now we call printk() - * without oops_in_progress set so that printk will give klogd - * a poke. Hold onto your hats... - */ - console_loglevel = 15; /* NMI oopser may have shut the console up */ - printk(" "); - console_loglevel = loglevel_save; -} - /*======================================================================* * do_page_fault() *======================================================================* diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c index 9ff143e87746..641aef36ccc4 100644 --- a/arch/s390/mm/fault.c +++ b/arch/s390/mm/fault.c @@ -83,12 +83,10 @@ static inline int notify_page_fault(enum die_val val, const char *str, } #endif -extern spinlock_t timerlist_lock; /* * Unlock any spinlocks which will prevent us from getting the - * message out (timerlist_lock is acquired through the - * console unblank code) + * message out. */ void bust_spinlocks(int yes) { diff --git a/arch/x86_64/mm/fault.c b/arch/x86_64/mm/fault.c index a65fc6f1dcaf..49e8cf2e06f8 100644 --- a/arch/x86_64/mm/fault.c +++ b/arch/x86_64/mm/fault.c @@ -69,27 +69,6 @@ static inline int notify_page_fault(enum die_val val, const char *str, return atomic_notifier_call_chain(¬ify_page_fault_chain, val, &args); } -void bust_spinlocks(int yes) -{ - int loglevel_save = console_loglevel; - if (yes) { - oops_in_progress = 1; - } else { -#ifdef CONFIG_VT - unblank_screen(); -#endif - oops_in_progress = 0; - /* - * OK, the message is on the console. Now we call printk() - * without oops_in_progress set so that printk will give klogd - * a poke. Hold onto your hats... - */ - console_loglevel = 15; /* NMI oopser may have shut the console up */ - printk(" "); - console_loglevel = loglevel_save; - } -} - /* Sometimes the CPU reports invalid exceptions on prefetch. Check that here and ignore. Opcode checker based on code by Richard Brunner */ -- cgit v1.2.3 From 82ddcb040570411fc2d421d96b3e69711c670328 Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Sat, 10 Feb 2007 01:46:20 -0800 Subject: [PATCH] extend the set of "__attribute__" shortcut macros Extend the set of "__attribute__" shortcut macros, and remove identical (and now superfluous) definitions from a couple of source files. based on a page at robert love's blog: http://rlove.org/log/2005102601 extend the set of shortcut macros defined in compiler-gcc.h with the following: #define __packed __attribute__((packed)) #define __weak __attribute__((weak)) #define __naked __attribute__((naked)) #define __noreturn __attribute__((noreturn)) #define __pure __attribute__((pure)) #define __aligned(x) __attribute__((aligned(x))) #define __printf(a,b) __attribute__((format(printf,a,b))) Once these are in place, it's up to subsystem maintainers to decide if they want to take advantage of them. there is already a strong precedent for using shortcuts like this in the source tree. The ones that might give people pause are "__aligned" and "__printf", but shortcuts for both of those are already in use, and in some ways very confusingly. note the two very different definitions for a macro named "ALIGNED": drivers/net/sgiseeq.c:#define ALIGNED(x) ((((unsigned long)(x)) + 0xf) & ~(0xf)) drivers/scsi/ultrastor.c:#define ALIGNED(x) __attribute__((aligned(x))) also: include/acpi/platform/acgcc.h: #define ACPI_PRINTF_LIKE(c) __attribute__ ((__format__ (__printf__, c, c+1))) Given the precedent, then, it seems logical to at least standardize on a consistent set of these macros. Signed-off-by: Robert P. J. Day Acked-by: Ralf Baechle Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/mips/mm/cache.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c index 1f954a238a63..31819c58bffa 100644 --- a/arch/mips/mm/cache.c +++ b/arch/mips/mm/cache.c @@ -107,8 +107,6 @@ void __update_cache(struct vm_area_struct *vma, unsigned long address, } } -#define __weak __attribute__((weak)) - static char cache_panic[] __initdata = "Yeee, unsupported cache architecture."; void __init cpu_cache_init(void) -- cgit v1.2.3 From 656dad312fb41ed95ef08325e9df9bece3aacbbb Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Sat, 10 Feb 2007 01:46:36 -0800 Subject: [PATCH] highmem: catch illegal nesting Catch illegally nested kmap_atomic()s even if the page that is mapped by the 'inner' instance is from lowmem. This avoids spuriously zapped kmap-atomic ptes and turns hard to find crashes into clear asserts at the bug site. Signed-off-by: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/mm/highmem.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/i386/mm/highmem.c b/arch/i386/mm/highmem.c index e0fa6cb655a8..bb2de1089add 100644 --- a/arch/i386/mm/highmem.c +++ b/arch/i386/mm/highmem.c @@ -33,13 +33,14 @@ void *kmap_atomic(struct page *page, enum km_type type) /* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */ pagefault_disable(); + + idx = type + KM_TYPE_NR*smp_processor_id(); + BUG_ON(!pte_none(*(kmap_pte-idx))); + if (!PageHighMem(page)) return page_address(page); - idx = type + KM_TYPE_NR*smp_processor_id(); vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx); - if (!pte_none(*(kmap_pte-idx))) - BUG(); set_pte(kmap_pte-idx, mk_pte(page, kmap_prot)); return (void*) vaddr; -- cgit v1.2.3 From 5ea8176994003483a18c8fed580901e2125f8a83 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 11 Feb 2007 15:41:31 +0000 Subject: [PATCH] sort the devres mess out * Split the implementation-agnostic stuff in separate files. * Make sure that targets using non-default request_irq() pull kernel/irq/devres.o * Introduce new symbols (HAS_IOPORT and HAS_IOMEM) defaulting to positive; allow architectures to turn them off (we needed these symbols anyway for dependencies of quite a few drivers). * protect the ioport-related parts of lib/devres.o with CONFIG_HAS_IOPORT. Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/arm/Kconfig | 5 +++++ arch/cris/Kconfig | 3 +++ arch/h8300/Kconfig | 3 +++ arch/h8300/kernel/Makefile | 4 +++- arch/m32r/Kconfig | 3 +++ arch/m68k/Kconfig | 3 +++ arch/m68k/kernel/Makefile | 4 +++- arch/m68knommu/Kconfig | 3 +++ arch/s390/Kconfig | 3 +++ arch/sparc/kernel/Makefile | 4 +++- arch/um/Kconfig | 3 +++ arch/xtensa/Kconfig | 3 +++ 12 files changed, 38 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index fbf4b2a62b60..5c795193ebba 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -29,6 +29,10 @@ config MMU bool default y +config NO_IOPORT + bool + default n + config EISA bool ---help--- @@ -298,6 +302,7 @@ config ARCH_RPC select TIMER_ACORN select ARCH_MAY_HAVE_PC_FDC select ISA_DMA_API + select NO_IOPORT help On the Acorn Risc-PC, Linux can support the internal IDE disk and CD-ROM interface, serial and parallel port, and the floppy drive. diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig index e3db1427dbe5..4b41248b61ad 100644 --- a/arch/cris/Kconfig +++ b/arch/cris/Kconfig @@ -44,6 +44,9 @@ config IRQ_PER_CPU bool default y +config NO_IOPORT + def_bool y + config CRIS bool default y diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig index 146eb28f6225..1734d96422c6 100644 --- a/arch/h8300/Kconfig +++ b/arch/h8300/Kconfig @@ -57,6 +57,9 @@ config TIME_LOW_RES bool default y +config NO_IOPORT + def_bool y + config ISA bool default y diff --git a/arch/h8300/kernel/Makefile b/arch/h8300/kernel/Makefile index 71b6131e98b8..4edbc2ef6ca2 100644 --- a/arch/h8300/kernel/Makefile +++ b/arch/h8300/kernel/Makefile @@ -6,6 +6,8 @@ extra-y := vmlinux.lds obj-y := process.o traps.o ptrace.o ints.o \ sys_h8300.o time.o semaphore.o signal.o \ - setup.o gpio.o init_task.o syscalls.o + setup.o gpio.o init_task.o syscalls.o devres.o + +devres-y = ../../../kernel/irq/devres.o obj-$(CONFIG_MODULES) += module.o h8300_ksyms.o diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig index 565d0138078e..9740d6b8ae11 100644 --- a/arch/m32r/Kconfig +++ b/arch/m32r/Kconfig @@ -28,6 +28,9 @@ config GENERIC_IRQ_PROBE bool default y +config NO_IOPORT + def_bool y + source "init/Kconfig" diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 0bffbe6e7e11..a8e1e604dfa8 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -42,6 +42,9 @@ config ARCH_MAY_HAVE_PC_FDC depends on Q40 || (BROKEN && SUN3X) default y +config NO_IOPORT + def_bool y + mainmenu "Linux/68k Kernel Configuration" source "init/Kconfig" diff --git a/arch/m68k/kernel/Makefile b/arch/m68k/kernel/Makefile index 1c9ecaa473d5..0b68ab8d63d1 100644 --- a/arch/m68k/kernel/Makefile +++ b/arch/m68k/kernel/Makefile @@ -10,7 +10,9 @@ endif extra-y += vmlinux.lds obj-y := entry.o process.o traps.o ints.o signal.o ptrace.o \ - sys_m68k.o time.o semaphore.o setup.o m68k_ksyms.o + sys_m68k.o time.o semaphore.o setup.o m68k_ksyms.o devres.o + +devres-y = ../../../kernel/irq/devres.o obj-$(CONFIG_PCI) += bios32.o obj-$(CONFIG_MODULES) += module.o diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig index c5fc5406dad0..823f73736bb5 100644 --- a/arch/m68knommu/Kconfig +++ b/arch/m68knommu/Kconfig @@ -53,6 +53,9 @@ config TIME_LOW_RES bool default y +config NO_IOPORT + def_bool y + source "init/Kconfig" menu "Processor type and features" diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index c64973004261..0c83d26ef09a 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -41,6 +41,9 @@ config GENERIC_HWEIGHT config GENERIC_TIME def_bool y +config NO_IOPORT + def_bool y + mainmenu "Linux Kernel Configuration" config S390 diff --git a/arch/sparc/kernel/Makefile b/arch/sparc/kernel/Makefile index 6616ee05c313..e795f282dece 100644 --- a/arch/sparc/kernel/Makefile +++ b/arch/sparc/kernel/Makefile @@ -12,7 +12,9 @@ obj-y := entry.o wof.o wuf.o etrap.o rtrap.o traps.o $(IRQ_OBJS) \ sys_sparc.o sunos_asm.o systbls.o \ time.o windows.o cpu.o devices.o sclow.o \ tadpole.o tick14.o ptrace.o sys_solaris.o \ - unaligned.o muldiv.o semaphore.o prom.o of_device.o + unaligned.o muldiv.o semaphore.o prom.o of_device.o devres.o + +devres-y = ../../../kernel/irq/devres.o obj-$(CONFIG_PCI) += pcic.o obj-$(CONFIG_SUN4) += sun4setup.o diff --git a/arch/um/Kconfig b/arch/um/Kconfig index d32a80e6668c..b3a21ba77cd2 100644 --- a/arch/um/Kconfig +++ b/arch/um/Kconfig @@ -16,6 +16,9 @@ config MMU bool default y +config NO_IOMEM + def_bool y + mainmenu "Linux/Usermode Kernel Configuration" config ISA diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig index 7c99d518e49e..7fbb44bea37f 100644 --- a/arch/xtensa/Kconfig +++ b/arch/xtensa/Kconfig @@ -46,6 +46,9 @@ config ARCH_HAS_ILOG2_U64 bool default n +config NO_IOPORT + def_bool y + source "init/Kconfig" menu "Processor type and features" -- cgit v1.2.3 From 23db764d3db5a4bb1e104ad9310e5dc18e4ffa1b Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 11 Feb 2007 18:15:29 +0000 Subject: [PATCH] Switch s390 to NO_IOMEM Martin Schwidefsky wrote: "s390 does not even need (in|out)b(_p|). I wondered what else from io.h do we not need. The answer is: almost nothing. With the devres patch from Al and the dma-mapping patch from Heiko we can get rid of iomem and all associated definitions." So we'll just need to replace NO_IOPORT with NO_IOMEM in Kconfig and kill arch/s390/mm/ioremap.c. BTW, there's an annoying bit of junk in there - IO_SPACE_LIMIT. We only need it for /proc/ioports, which AFAICS shouldn't even be there on s390 (or uml). OTOH, removing that thing would mean a user-visible change - we go from "empty file in /proc" to "no such file in /proc"... Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/s390/Kconfig | 2 +- arch/s390/mm/Makefile | 2 +- arch/s390/mm/ioremap.c | 58 -------------------------------------------------- 3 files changed, 2 insertions(+), 60 deletions(-) delete mode 100644 arch/s390/mm/ioremap.c (limited to 'arch') diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index 0c83d26ef09a..eaaac3788110 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -41,7 +41,7 @@ config GENERIC_HWEIGHT config GENERIC_TIME def_bool y -config NO_IOPORT +config NO_IOMEM def_bool y mainmenu "Linux Kernel Configuration" diff --git a/arch/s390/mm/Makefile b/arch/s390/mm/Makefile index 8e09db1edbb9..f95449b29fa5 100644 --- a/arch/s390/mm/Makefile +++ b/arch/s390/mm/Makefile @@ -2,6 +2,6 @@ # Makefile for the linux s390-specific parts of the memory manager. # -obj-y := init.o fault.o ioremap.o extmem.o mmap.o vmem.o +obj-y := init.o fault.o extmem.o mmap.o vmem.o obj-$(CONFIG_CMM) += cmm.o diff --git a/arch/s390/mm/ioremap.c b/arch/s390/mm/ioremap.c deleted file mode 100644 index 3d2100a4e209..000000000000 --- a/arch/s390/mm/ioremap.c +++ /dev/null @@ -1,58 +0,0 @@ -/* - * arch/s390/mm/ioremap.c - * - * S390 version - * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation - * Author(s): Hartmut Penner (hp@de.ibm.com) - * - * Derived from "arch/i386/mm/extable.c" - * (C) Copyright 1995 1996 Linus Torvalds - * - * Re-map IO memory to kernel address space so that we can access it. - * This is needed for high PCI addresses that aren't mapped in the - * 640k-1MB IO memory area on PC's - */ - -#include -#include -#include -#include - -/* - * Generic mapping function (not visible outside): - */ - -/* - * Remap an arbitrary physical address space into the kernel virtual - * address space. Needed when the kernel wants to access high addresses - * directly. - */ -void * __ioremap(unsigned long phys_addr, unsigned long size, unsigned long flags) -{ - void * addr; - struct vm_struct * area; - - if (phys_addr < virt_to_phys(high_memory)) - return phys_to_virt(phys_addr); - if (phys_addr & ~PAGE_MASK) - return NULL; - size = PAGE_ALIGN(size); - if (!size || size > phys_addr + size) - return NULL; - area = get_vm_area(size, VM_IOREMAP); - if (!area) - return NULL; - addr = area->addr; - if (ioremap_page_range((unsigned long)addr, (unsigned long)addr + size, - phys_addr, __pgprot(flags))) { - vfree(addr); - return NULL; - } - return addr; -} - -void iounmap(void *addr) -{ - if (addr > high_memory) - vfree(addr); -} -- cgit v1.2.3 From 0ec67667ab414b18a0518d5b11c842fd342e9cb1 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 12 Feb 2007 15:47:04 +0100 Subject: [S390] smp_call_function/smp_call_function_on locking. smp_call_function and smp_call_function_on share the same lock and smp_call_function_on disables softirq's so it can be called from softirq context as well. Hence smp_call_function muss disable softirqs as well to avoid deadlocks. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/smp.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index 65b52320d145..83a4ea6e3d60 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -57,7 +57,7 @@ static void smp_ext_bitcall(int, ec_bit_sig); static void smp_ext_bitcall_others(ec_bit_sig); /* -5B * Structure and data for smp_call_function(). This is designed to minimise + * Structure and data for smp_call_function(). This is designed to minimise * static memory requirements. It also looks cleaner. */ static DEFINE_SPINLOCK(call_lock); @@ -104,7 +104,7 @@ int smp_call_function (void (*func) (void *info), void *info, int nonatomic, * remote CPUs are nearly ready to execute <> or are or have executed. * * You must not call this function with disabled interrupts or from a - * hardware interrupt handler or from a bottom half handler. + * hardware interrupt handler. */ { struct call_data_struct data; @@ -113,8 +113,8 @@ int smp_call_function (void (*func) (void *info), void *info, int nonatomic, if (cpus <= 0) return 0; - /* Can deadlock when called with interrupts disabled */ - WARN_ON(irqs_disabled()); + /* Can deadlock when interrupts are disabled or if in wrong context */ + WARN_ON(irqs_disabled() || in_irq()); data.func = func; data.info = info; @@ -123,7 +123,7 @@ int smp_call_function (void (*func) (void *info), void *info, int nonatomic, if (wait) atomic_set(&data.finished, 0); - spin_lock(&call_lock); + spin_lock_bh(&call_lock); call_data = &data; /* Send a message to all other CPUs and wait for them to respond */ smp_ext_bitcall_others(ec_call_function); @@ -135,7 +135,7 @@ int smp_call_function (void (*func) (void *info), void *info, int nonatomic, if (wait) while (atomic_read(&data.finished) != cpus) cpu_relax(); - spin_unlock(&call_lock); + spin_unlock_bh(&call_lock); return 0; } @@ -159,6 +159,9 @@ int smp_call_function_on(void (*func) (void *info), void *info, if (!cpu_online(cpu)) return -EINVAL; + /* Can deadlock when interrupts are disabled or if in wrong context */ + WARN_ON(irqs_disabled() || in_irq()); + /* disable preemption for local function call */ curr_cpu = get_cpu(); -- cgit v1.2.3 From 0e25338bc11fa8e41e44e4db5b5101e3d882dc5b Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Mon, 12 Feb 2007 00:52:54 -0800 Subject: [PATCH] signal: use kill_pgrp not kill_pg in the sunos compatibility code I am slowly moving to a model where all process killing is struct pid based instead of pid_t based. The sunos compatibility code is one of the last users of the old pid_t based kill_pg in the kernel. By being complete I allow for the future removal of kill_pg from the kernel, which will ensure I don't miss something. Signed-off-by: Eric W. Biederman Cc: Alan Cox Cc: Oleg Nesterov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/sparc/kernel/sys_sunos.c | 10 ++++++---- arch/sparc64/kernel/sys_sunos32.c | 11 +++++++++-- 2 files changed, 15 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/sparc/kernel/sys_sunos.c b/arch/sparc/kernel/sys_sunos.c index 0bf8c165fc92..da6606f0cffc 100644 --- a/arch/sparc/kernel/sys_sunos.c +++ b/arch/sparc/kernel/sys_sunos.c @@ -859,14 +859,16 @@ asmlinkage int sunos_wait4(pid_t pid, unsigned int __user *stat_addr, return ret; } -extern int kill_pg(int, int, int); asmlinkage int sunos_killpg(int pgrp, int sig) { int ret; - lock_kernel(); - ret = kill_pg(pgrp, sig, 0); - unlock_kernel(); + rcu_read_lock(); + ret = -EINVAL; + if (pgrp > 0) + ret = kill_pgrp(find_pid(pgrp), sig, 0); + rcu_read_unlock(); + return ret; } diff --git a/arch/sparc64/kernel/sys_sunos32.c b/arch/sparc64/kernel/sys_sunos32.c index 2ebc2c051383..4cff95b7b3a4 100644 --- a/arch/sparc64/kernel/sys_sunos32.c +++ b/arch/sparc64/kernel/sys_sunos32.c @@ -824,10 +824,17 @@ asmlinkage int sunos_wait4(compat_pid_t pid, compat_uint_t __user *stat_addr, in return ret; } -extern int kill_pg(int, int, int); asmlinkage int sunos_killpg(int pgrp, int sig) { - return kill_pg(pgrp, sig, 0); + int ret; + + rcu_read_lock(); + ret = -EINVAL; + if (pgrp > 0) + ret = kill_pgrp(find_pid(pgrp), sig, 0); + rcu_read_unlock(); + + return ret; } asmlinkage int sunos_audit(void) -- cgit v1.2.3 From ab521dc0f8e117fd808d3e425216864d60390500 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Mon, 12 Feb 2007 00:53:00 -0800 Subject: [PATCH] tty: update the tty layer to work with struct pid Of kernel subsystems that work with pids the tty layer is probably the largest consumer. But it has the nice virtue that the assiation with a session only lasts until the session leader exits. Which means that no reference counting is required. So using struct pid winds up being a simple optimization to avoid hash table lookups. In the long term the use of pid_nr also ensures that when we have multiple pid spaces mixed everything will work correctly. Signed-off-by: Eric W. Biederman Cc: Alan Cox Cc: Oleg Nesterov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/drivers/line.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c index 0e1e9a20a4d6..01d4ab6b0ef1 100644 --- a/arch/um/drivers/line.c +++ b/arch/um/drivers/line.c @@ -774,7 +774,7 @@ static irqreturn_t winch_interrupt(int irq, void *data) line = tty->driver_data; chan_window_size(&line->chan_list, &tty->winsize.ws_row, &tty->winsize.ws_col); - kill_pg(tty->pgrp, SIGWINCH, 1); + kill_pgrp(tty->pgrp, SIGWINCH, 1); } out: if(winch->fd != -1) -- cgit v1.2.3 From a31c4eea2127ee52b5c7c1befada4664963ad030 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 12 Feb 2007 00:53:13 -0800 Subject: [PATCH] AT91 GPIO wrappers This is a first cut at making the AT91 code use the generic GPIO calls. Note that the original AT91 GPIO calls merged the "mux pin as GPIO" and "set GPIO direction" functionality into one API call, contrary to what's specified as a cross-platform portable model. So this involved a few non-inlinable functions. [akpm@osdl.org: cleanups] Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/arm/mach-at91rm9200/gpio.c | 48 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 48 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-at91rm9200/gpio.c b/arch/arm/mach-at91rm9200/gpio.c index af22659c8a28..15eb5b6b29f2 100644 --- a/arch/arm/mach-at91rm9200/gpio.c +++ b/arch/arm/mach-at91rm9200/gpio.c @@ -64,6 +64,24 @@ static inline unsigned pin_to_mask(unsigned pin) */ +/* + * mux the pin to the "GPIO" peripheral role. + */ +int __init_or_module at91_set_GPIO_periph(unsigned pin, int use_pullup) +{ + void __iomem *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + if (!pio) + return -EINVAL; + __raw_writel(mask, pio + PIO_IDR); + __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR)); + __raw_writel(mask, pio + PIO_PER); + return 0; +} +EXPORT_SYMBOL(at91_set_GPIO_periph); + + /* * mux the pin to the "A" internal peripheral role. */ @@ -181,6 +199,36 @@ EXPORT_SYMBOL(at91_set_multi_drive); /*--------------------------------------------------------------------------*/ +/* new-style GPIO calls; these expect at91_set_GPIO_periph to have been + * called, and maybe at91_set_multi_drive() for putout pins. + */ + +int gpio_direction_input(unsigned pin) +{ + void __iomem *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + if (!pio || !(__raw_readl(pio + PIO_PSR) & mask)) + return -EINVAL; + __raw_writel(mask, pio + PIO_OER); + return 0; +} +EXPORT_SYMBOL(gpio_direction_input); + +int gpio_direction_output(unsigned pin) +{ + void __iomem *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + if (!pio || !(__raw_readl(pio + PIO_PSR) & mask)) + return -EINVAL; + __raw_writel(mask, pio + PIO_OER); + return 0; +} +EXPORT_SYMBOL(gpio_direction_output); + +/*--------------------------------------------------------------------------*/ + /* * assuming the pin is muxed as a gpio output, set its value. */ -- cgit v1.2.3 From 3c253ca0f0930b767a5d6ac0c1b3c6f5619e28f9 Mon Sep 17 00:00:00 2001 From: Alon Bar-Lev Date: Mon, 12 Feb 2007 00:54:05 -0800 Subject: [PATCH] Dynamic kernel command-line: alpha 1. Rename saved_command_line into boot_command_line. 2. Set command_line as __initdata. Signed-off-by: Alon Bar-Lev Cc: Richard Henderson Cc: Ivan Kokshaysky Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/alpha/kernel/setup.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/alpha/kernel/setup.c b/arch/alpha/kernel/setup.c index 1aea7c7c683c..d352c2b05f1a 100644 --- a/arch/alpha/kernel/setup.c +++ b/arch/alpha/kernel/setup.c @@ -122,7 +122,7 @@ static void get_sysnames(unsigned long, unsigned long, unsigned long, char **, char **); static void determine_cpu_caches (unsigned int); -static char command_line[COMMAND_LINE_SIZE]; +static char __initdata command_line[COMMAND_LINE_SIZE]; /* * The format of "screen_info" is strange, and due to early @@ -547,7 +547,7 @@ setup_arch(char **cmdline_p) } else { strlcpy(command_line, COMMAND_LINE, sizeof command_line); } - strcpy(saved_command_line, command_line); + strcpy(boot_command_line, command_line); *cmdline_p = command_line; /* @@ -589,7 +589,7 @@ setup_arch(char **cmdline_p) } /* Replace the command line, now that we've killed it with strsep. */ - strcpy(command_line, saved_command_line); + strcpy(command_line, boot_command_line); /* If we want SRM console printk echoing early, do it now. */ if (alpha_using_srm && srmcons_output) { -- cgit v1.2.3 From cd81899a7d9e77ffd5280b10d0413fb241b18388 Mon Sep 17 00:00:00 2001 From: Alon Bar-Lev Date: Mon, 12 Feb 2007 00:54:06 -0800 Subject: [PATCH] Dynamic kernel command-line: arm 1. Rename saved_command_line into boot_command_line. 2. Set command_line as __initdata. Signed-off-by: Alon Bar-Lev Cc: Russell King Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/arm/kernel/setup.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index bbab134cd82d..ed522151878b 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -106,7 +106,7 @@ unsigned long phys_initrd_size __initdata = 0; static struct meminfo meminfo __initdata = { 0, }; static const char *cpu_name; static const char *machine_name; -static char command_line[COMMAND_LINE_SIZE]; +static char __initdata command_line[COMMAND_LINE_SIZE]; static char default_command_line[COMMAND_LINE_SIZE] __initdata = CONFIG_CMDLINE; static union { char c[4]; unsigned long l; } endian_test __initdata = { { 'l', '?', '?', 'b' } }; @@ -803,8 +803,8 @@ void __init setup_arch(char **cmdline_p) init_mm.end_data = (unsigned long) &_edata; init_mm.brk = (unsigned long) &_end; - memcpy(saved_command_line, from, COMMAND_LINE_SIZE); - saved_command_line[COMMAND_LINE_SIZE-1] = '\0'; + memcpy(boot_command_line, from, COMMAND_LINE_SIZE); + boot_command_line[COMMAND_LINE_SIZE-1] = '\0'; parse_cmdline(cmdline_p, from); paging_init(&meminfo, mdesc); request_standard_resources(&meminfo, mdesc); -- cgit v1.2.3 From 64d5a70f956071f8434f403d44835a4895abb78e Mon Sep 17 00:00:00 2001 From: Alon Bar-Lev Date: Mon, 12 Feb 2007 00:54:07 -0800 Subject: [PATCH] Dynamic kernel command-line: arm26 1. Rename saved_command_line into boot_command_line. 2. Set command_line as __initdata. Signed-off-by: Alon Bar-Lev Cc: Ian Molton Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/arm26/kernel/setup.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm26/kernel/setup.c b/arch/arm26/kernel/setup.c index 466ddb54b44f..0e006c6cd5a0 100644 --- a/arch/arm26/kernel/setup.c +++ b/arch/arm26/kernel/setup.c @@ -80,7 +80,7 @@ unsigned long phys_initrd_size __initdata = 0; static struct meminfo meminfo __initdata = { 0, }; static struct proc_info_item proc_info; static const char *machine_name; -static char command_line[COMMAND_LINE_SIZE]; +static char __initdata command_line[COMMAND_LINE_SIZE]; static char default_command_line[COMMAND_LINE_SIZE] __initdata = CONFIG_CMDLINE; @@ -492,8 +492,8 @@ void __init setup_arch(char **cmdline_p) init_mm.end_data = (unsigned long) &_edata; init_mm.brk = (unsigned long) &_end; - memcpy(saved_command_line, from, COMMAND_LINE_SIZE); - saved_command_line[COMMAND_LINE_SIZE-1] = '\0'; + memcpy(boot_command_line, from, COMMAND_LINE_SIZE); + boot_command_line[COMMAND_LINE_SIZE-1] = '\0'; parse_cmdline(&meminfo, cmdline_p, from); bootmem_init(&meminfo); paging_init(&meminfo); -- cgit v1.2.3 From bf4352c0fc82e6dadfa7eea506c19dea0106baac Mon Sep 17 00:00:00 2001 From: Alon Bar-Lev Date: Mon, 12 Feb 2007 00:54:08 -0800 Subject: [PATCH] Dynamic kernel command-line: avr32 1. Rename saved_command_line into boot_command_line. 2. Set command_line as __initdata. Signed-off-by: Alon Bar-Lev Acked-by: Haavard Skinnemoen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/avr32/kernel/setup.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/avr32/kernel/setup.c b/arch/avr32/kernel/setup.c index c6734aefb559..a1a7c3c3f522 100644 --- a/arch/avr32/kernel/setup.c +++ b/arch/avr32/kernel/setup.c @@ -45,7 +45,7 @@ struct avr32_cpuinfo boot_cpu_data = { }; EXPORT_SYMBOL(boot_cpu_data); -static char command_line[COMMAND_LINE_SIZE]; +static char __initdata command_line[COMMAND_LINE_SIZE]; /* * Should be more than enough, but if you have a _really_ complex @@ -202,7 +202,7 @@ __tagtable(ATAG_MEM, parse_tag_mem); static int __init parse_tag_cmdline(struct tag *tag) { - strlcpy(saved_command_line, tag->u.cmdline.cmdline, COMMAND_LINE_SIZE); + strlcpy(boot_command_line, tag->u.cmdline.cmdline, COMMAND_LINE_SIZE); return 0; } __tagtable(ATAG_CMDLINE, parse_tag_cmdline); @@ -294,7 +294,7 @@ void __init setup_arch (char **cmdline_p) init_mm.end_data = (unsigned long) &_edata; init_mm.brk = (unsigned long) &_end; - strlcpy(command_line, saved_command_line, COMMAND_LINE_SIZE); + strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE); *cmdline_p = command_line; parse_early_param(); -- cgit v1.2.3 From 87e1f9c6dcb4829fd8a68a3af87098cee8ef955b Mon Sep 17 00:00:00 2001 From: Alon Bar-Lev Date: Mon, 12 Feb 2007 00:54:09 -0800 Subject: [PATCH] Dynamic kernel command-line: cris 1. Rename saved_command_line into boot_command_line. 2. Set cris_command_line as __initdata. Signed-off-by: Alon Bar-Lev Cc: Mikael Starvik Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/cris/kernel/setup.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/cris/kernel/setup.c b/arch/cris/kernel/setup.c index ca8b45a0fe2e..65466c49d7a9 100644 --- a/arch/cris/kernel/setup.c +++ b/arch/cris/kernel/setup.c @@ -29,7 +29,7 @@ struct screen_info screen_info; extern int root_mountflags; extern char _etext, _edata, _end; -char cris_command_line[COMMAND_LINE_SIZE] = { 0, }; +char __initdata cris_command_line[COMMAND_LINE_SIZE] = { 0, }; extern const unsigned long text_start, edata; /* set by the linker script */ extern unsigned long dram_start, dram_end; @@ -153,8 +153,8 @@ setup_arch(char **cmdline_p) #endif /* Save command line for future references. */ - memcpy(saved_command_line, cris_command_line, COMMAND_LINE_SIZE); - saved_command_line[COMMAND_LINE_SIZE - 1] = '\0'; + memcpy(boot_command_line, cris_command_line, COMMAND_LINE_SIZE); + boot_command_line[COMMAND_LINE_SIZE - 1] = '\0'; /* give credit for the CRIS port */ show_etrax_copyright(); -- cgit v1.2.3 From 9c00f7613249b3b42782a226308353a4033c11c3 Mon Sep 17 00:00:00 2001 From: Alon Bar-Lev Date: Mon, 12 Feb 2007 00:54:09 -0800 Subject: [PATCH] Dynamic kernel command-line: frv 1. Rename saved_command_line into boot_command_line. 2. Set command_line as __initdata. Signed-off-by: Alon Bar-Lev Cc: David Howells Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/frv/kernel/setup.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/frv/kernel/setup.c b/arch/frv/kernel/setup.c index 1a5eb6c301c9..8ea3ca2aba62 100644 --- a/arch/frv/kernel/setup.c +++ b/arch/frv/kernel/setup.c @@ -110,7 +110,7 @@ unsigned long __initdata num_mappedpages; struct cpuinfo_frv __nongprelbss boot_cpu_data; -char command_line[COMMAND_LINE_SIZE]; +char __initdata command_line[COMMAND_LINE_SIZE]; char __initdata redboot_command_line[COMMAND_LINE_SIZE]; #ifdef CONFIG_PM @@ -762,7 +762,7 @@ void __init setup_arch(char **cmdline_p) printk("uClinux FR-V port done by Red Hat Inc \n"); #endif - memcpy(saved_command_line, redboot_command_line, COMMAND_LINE_SIZE); + memcpy(boot_command_line, redboot_command_line, COMMAND_LINE_SIZE); determine_cpu(); determine_clocks(1); @@ -803,7 +803,7 @@ void __init setup_arch(char **cmdline_p) #endif /* deal with the command line - RedBoot may have passed one to the kernel */ - memcpy(command_line, saved_command_line, sizeof(command_line)); + memcpy(command_line, boot_command_line, sizeof(command_line)); *cmdline_p = &command_line[0]; parse_cmdline_early(command_line); -- cgit v1.2.3 From 5ff625904cd4e41d70bc01e6683cbb58f312f709 Mon Sep 17 00:00:00 2001 From: Alon Bar-Lev Date: Mon, 12 Feb 2007 00:54:10 -0800 Subject: [PATCH] Dynamic kernel command-line: h8300 1. Rename saved_command_line into boot_command_line. 2. Set command_line as __initdata. Signed-off-by: Alon Bar-Lev Cc: Yoshinori Sato Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/h8300/kernel/setup.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/h8300/kernel/setup.c b/arch/h8300/kernel/setup.c index 6adf8f41d2a1..313cd8081044 100644 --- a/arch/h8300/kernel/setup.c +++ b/arch/h8300/kernel/setup.c @@ -54,7 +54,7 @@ unsigned long rom_length; unsigned long memory_start; unsigned long memory_end; -char command_line[COMMAND_LINE_SIZE]; +char __initdata command_line[COMMAND_LINE_SIZE]; extern int _stext, _etext, _sdata, _edata, _sbss, _ebss, _end; extern int _ramstart, _ramend; @@ -154,8 +154,8 @@ void __init setup_arch(char **cmdline_p) #endif /* Keep a copy of command line */ *cmdline_p = &command_line[0]; - memcpy(saved_command_line, command_line, COMMAND_LINE_SIZE); - saved_command_line[COMMAND_LINE_SIZE-1] = 0; + memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE); + boot_command_line[COMMAND_LINE_SIZE-1] = 0; #ifdef DEBUG if (strlen(*cmdline_p)) -- cgit v1.2.3 From 4e498b66104af914ef04d6e7fbbbc13a4f7c936e Mon Sep 17 00:00:00 2001 From: Alon Bar-Lev Date: Mon, 12 Feb 2007 00:54:11 -0800 Subject: [PATCH] Dynamic kernel command-line: i386 1. Rename saved_command_line into boot_command_line. 2. Set command_line as __initdata. Signed-off-by: Alon Bar-Lev Cc: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/head.S | 2 +- arch/i386/kernel/setup.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/head.S b/arch/i386/kernel/head.S index edef5084ce17..cb9abdfced9b 100644 --- a/arch/i386/kernel/head.S +++ b/arch/i386/kernel/head.S @@ -103,7 +103,7 @@ ENTRY(startup_32) movzwl OLD_CL_OFFSET,%esi addl $(OLD_CL_BASE_ADDR),%esi 2: - movl $(saved_command_line - __PAGE_OFFSET),%edi + movl $(boot_command_line - __PAGE_OFFSET),%edi movl $(COMMAND_LINE_SIZE/4),%ecx rep movsl diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c index 4b31ad70c1ac..4694ac980cd2 100644 --- a/arch/i386/kernel/setup.c +++ b/arch/i386/kernel/setup.c @@ -132,7 +132,7 @@ unsigned long saved_videomode; #define RAMDISK_PROMPT_FLAG 0x8000 #define RAMDISK_LOAD_FLAG 0x4000 -static char command_line[COMMAND_LINE_SIZE]; +static char __initdata command_line[COMMAND_LINE_SIZE]; unsigned char __initdata boot_params[PARAM_SIZE]; @@ -576,7 +576,7 @@ void __init setup_arch(char **cmdline_p) print_memory_map("user"); } - strlcpy(command_line, saved_command_line, COMMAND_LINE_SIZE); + strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE); *cmdline_p = command_line; max_low_pfn = setup_memory(); -- cgit v1.2.3 From a8d91b8477aa433ee0131b031d782411976e1726 Mon Sep 17 00:00:00 2001 From: Alon Bar-Lev Date: Mon, 12 Feb 2007 00:54:12 -0800 Subject: [PATCH] Dynamic kernel command-line: ia64 1. Rename saved_command_line into boot_command_line. 2. Set command_line as __initdata. [akpm@osdl.org: move some declarations to the right place] Signed-off-by: Alon Bar-Lev Cc: "Luck, Tony" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ia64/kernel/efi.c | 5 +++-- arch/ia64/kernel/sal.c | 5 +++-- arch/ia64/kernel/setup.c | 4 ++-- 3 files changed, 8 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/efi.c b/arch/ia64/kernel/efi.c index 6c03928544c2..b12d6d13202a 100644 --- a/arch/ia64/kernel/efi.c +++ b/arch/ia64/kernel/efi.c @@ -405,6 +405,8 @@ efi_map_pal_code (void) ia64_srlz_i(); } +extern char __initdata boot_command_line[]; + void __init efi_init (void) { @@ -413,11 +415,10 @@ efi_init (void) efi_char16_t *c16; u64 efi_desc_size; char *cp, vendor[100] = "unknown"; - extern char saved_command_line[]; int i; /* it's too early to be able to use the standard kernel command line support... */ - for (cp = saved_command_line; *cp; ) { + for (cp = boot_command_line; *cp; ) { if (memcmp(cp, "mem=", 4) == 0) { mem_limit = memparse(cp + 4, &cp); } else if (memcmp(cp, "max_addr=", 9) == 0) { diff --git a/arch/ia64/kernel/sal.c b/arch/ia64/kernel/sal.c index 20bad78b5073..831d57f257db 100644 --- a/arch/ia64/kernel/sal.c +++ b/arch/ia64/kernel/sal.c @@ -190,13 +190,14 @@ sal_desc_ap_wakeup (void *p) } } +extern char __initdata boot_command_line[]; + static void __init chk_nointroute_opt(void) { char *cp; - extern char saved_command_line[]; - for (cp = saved_command_line; *cp; ) { + for (cp = boot_command_line; *cp; ) { if (memcmp(cp, "nointroute", 10) == 0) { no_int_routing = 1; printk ("no_int_routing on\n"); diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index 83c2629e1c4c..5fa09d141ab7 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -262,7 +262,7 @@ reserve_memory (void) * appropriate after a kernel panic. */ { - char *from = strstr(saved_command_line, "crashkernel="); + char *from = strstr(boot_command_line, "crashkernel="); unsigned long base, size; if (from) { size = memparse(from + 12, &from); @@ -463,7 +463,7 @@ setup_arch (char **cmdline_p) ia64_patch_vtop((u64) __start___vtop_patchlist, (u64) __end___vtop_patchlist); *cmdline_p = __va(ia64_boot_param->command_line); - strlcpy(saved_command_line, *cmdline_p, COMMAND_LINE_SIZE); + strlcpy(boot_command_line, *cmdline_p, COMMAND_LINE_SIZE); efi_init(); io_port_init(); -- cgit v1.2.3 From 3561794d80843588ed8b47fffb20e2dcd9c40ff3 Mon Sep 17 00:00:00 2001 From: Alon Bar-Lev Date: Mon, 12 Feb 2007 00:54:13 -0800 Subject: [PATCH] Dynamic kernel command-line: m32r 1. Rename saved_command_line into boot_command_line. 2. Set command_line as __initdata. Signed-off-by: Alon Bar-Lev Cc: Hirokazu Takata Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/m32r/kernel/setup.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/m32r/kernel/setup.c b/arch/m32r/kernel/setup.c index 936205f7aba0..d64814385d70 100644 --- a/arch/m32r/kernel/setup.c +++ b/arch/m32r/kernel/setup.c @@ -64,7 +64,7 @@ struct screen_info screen_info = { extern int root_mountflags; -static char command_line[COMMAND_LINE_SIZE]; +static char __initdata command_line[COMMAND_LINE_SIZE]; static struct resource data_resource = { .name = "Kernel data", @@ -95,8 +95,8 @@ static __inline__ void parse_mem_cmdline(char ** cmdline_p) int usermem = 0; /* Save unparsed command line copy for /proc/cmdline */ - memcpy(saved_command_line, COMMAND_LINE, COMMAND_LINE_SIZE); - saved_command_line[COMMAND_LINE_SIZE-1] = '\0'; + memcpy(boot_command_line, COMMAND_LINE, COMMAND_LINE_SIZE); + boot_command_line[COMMAND_LINE_SIZE-1] = '\0'; memory_start = (unsigned long)CONFIG_MEMORY_START+PAGE_OFFSET; memory_end = memory_start+(unsigned long)CONFIG_MEMORY_SIZE; -- cgit v1.2.3 From 187959f31e92cde16b274f0b61dfaca3a8b14089 Mon Sep 17 00:00:00 2001 From: Alon Bar-Lev Date: Mon, 12 Feb 2007 00:54:14 -0800 Subject: [PATCH] Dynamic kernel command-line: m68k Rename saved_command_line into boot_command_line. Signed-off-by: Alon Bar-Lev Cc: Geert Uytterhoeven Cc: Roman Zippel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/m68k/kernel/setup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/m68k/kernel/setup.c b/arch/m68k/kernel/setup.c index 9af3ee0e555d..42b8fd09ea8f 100644 --- a/arch/m68k/kernel/setup.c +++ b/arch/m68k/kernel/setup.c @@ -256,7 +256,7 @@ void __init setup_arch(char **cmdline_p) init_mm.brk = (unsigned long) &_end; *cmdline_p = m68k_command_line; - memcpy(saved_command_line, *cmdline_p, CL_SIZE); + memcpy(boot_command_line, *cmdline_p, CL_SIZE); /* Parse the command line for arch-specific options. * For the m68k, this is currently only "debug=xxx" to enable printing -- cgit v1.2.3 From f2a09e19cae45b7dfa4b72d70182b5bc9afa2ddb Mon Sep 17 00:00:00 2001 From: Alon Bar-Lev Date: Mon, 12 Feb 2007 00:54:14 -0800 Subject: [PATCH] Dynamic kernel command-line: m68knommu 1. Rename saved_command_line into boot_command_line. 2. Set command_line as __initdata. Signed-off-by: Alon Bar-Lev Cc: Greg Ungerer Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/m68knommu/kernel/setup.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/m68knommu/kernel/setup.c b/arch/m68knommu/kernel/setup.c index 9cf2e4d1fc77..d5c25d27b64d 100644 --- a/arch/m68knommu/kernel/setup.c +++ b/arch/m68knommu/kernel/setup.c @@ -44,7 +44,7 @@ unsigned long memory_end; EXPORT_SYMBOL(memory_start); EXPORT_SYMBOL(memory_end); -char command_line[COMMAND_LINE_SIZE]; +char __initdata command_line[COMMAND_LINE_SIZE]; /* setup some dummy routines */ static void dummy_waitbut(void) @@ -231,8 +231,8 @@ void setup_arch(char **cmdline_p) /* Keep a copy of command line */ *cmdline_p = &command_line[0]; - memcpy(saved_command_line, command_line, COMMAND_LINE_SIZE); - saved_command_line[COMMAND_LINE_SIZE-1] = 0; + memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE); + boot_command_line[COMMAND_LINE_SIZE-1] = 0; #ifdef DEBUG if (strlen(*cmdline_p)) -- cgit v1.2.3 From 43cd34645d3bf35cbaa68f28b85d12d0b9e08ab9 Mon Sep 17 00:00:00 2001 From: Alon Bar-Lev Date: Mon, 12 Feb 2007 00:54:15 -0800 Subject: [PATCH] Dynamic kernel command-line: mips Rename saved_command_line into boot_command_line. Signed-off-by: Alon Bar-Lev Cc: Ralf Baechle Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/mips/kernel/setup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index d2e01e7167b8..394540fad769 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -452,7 +452,7 @@ static void __init arch_mem_init(char **cmdline_p) print_memory_map(); strlcpy(command_line, arcs_cmdline, sizeof(command_line)); - strlcpy(saved_command_line, command_line, COMMAND_LINE_SIZE); + strlcpy(boot_command_line, command_line, COMMAND_LINE_SIZE); *cmdline_p = command_line; -- cgit v1.2.3 From 668f9931c812224ab2a6d57cdf2f0ec3865b68d2 Mon Sep 17 00:00:00 2001 From: Alon Bar-Lev Date: Mon, 12 Feb 2007 00:54:16 -0800 Subject: [PATCH] Dynamic kernel command-line: parisc 1. Rename saved_command_line into boot_command_line. 2. Set command_line as __initdata. Signed-off-by: Alon Bar-Lev Cc: Ralf Baechle Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/parisc/kernel/setup.c | 8 ++++---- arch/parisc/mm/init.c | 4 ++-- 2 files changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/parisc/kernel/setup.c b/arch/parisc/kernel/setup.c index 3c7a3faf78ed..74b3686dd1e0 100644 --- a/arch/parisc/kernel/setup.c +++ b/arch/parisc/kernel/setup.c @@ -45,7 +45,7 @@ #include #include -char command_line[COMMAND_LINE_SIZE] __read_mostly; +char __initdata command_line[COMMAND_LINE_SIZE] __read_mostly; /* Intended for ccio/sba/cpu statistics under /proc/bus/{runway|gsc} */ struct proc_dir_entry * proc_runway_root __read_mostly = NULL; @@ -71,9 +71,9 @@ void __init setup_cmdline(char **cmdline_p) /* boot_args[0] is free-mem start, boot_args[1] is ptr to command line */ if (boot_args[0] < 64) { /* called from hpux boot loader */ - saved_command_line[0] = '\0'; + boot_command_line[0] = '\0'; } else { - strcpy(saved_command_line, (char *)__va(boot_args[1])); + strcpy(boot_command_line, (char *)__va(boot_args[1])); #ifdef CONFIG_BLK_DEV_INITRD if (boot_args[2] != 0) /* did palo pass us a ramdisk? */ @@ -84,7 +84,7 @@ void __init setup_cmdline(char **cmdline_p) #endif } - strcpy(command_line, saved_command_line); + strcpy(command_line, boot_command_line); *cmdline_p = command_line; } diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c index 0c118e584e73..f355fb591e7f 100644 --- a/arch/parisc/mm/init.c +++ b/arch/parisc/mm/init.c @@ -77,12 +77,12 @@ static void __init mem_limit_func(void) { char *cp, *end; unsigned long limit; - extern char saved_command_line[]; + extern char __initdata boot_command_line[]; /* We need this before __setup() functions are called */ limit = MAX_MEM; - for (cp = saved_command_line; *cp; ) { + for (cp = boot_command_line; *cp; ) { if (memcmp(cp, "mem=", 4) == 0) { cp += 4; limit = memparse(cp, &end); -- cgit v1.2.3 From b8757b21f7628c57cb20e55be324fdef283a56e9 Mon Sep 17 00:00:00 2001 From: Alon Bar-Lev Date: Mon, 12 Feb 2007 00:54:17 -0800 Subject: [PATCH] Dynamic kernel command-line: powerpc Rename saved_command_line into boot_command_line. Signed-off-by: Alon Bar-Lev Cc: Paul Mackerras Cc: Benjamin Herrenschmidt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/powerpc/kernel/legacy_serial.c | 2 +- arch/powerpc/kernel/prom.c | 2 +- arch/powerpc/kernel/udbg.c | 2 +- arch/powerpc/platforms/powermac/setup.c | 4 ++-- 4 files changed, 5 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c index 5e6ddfa474c0..89f46f377922 100644 --- a/arch/powerpc/kernel/legacy_serial.c +++ b/arch/powerpc/kernel/legacy_serial.c @@ -498,7 +498,7 @@ static int __init check_legacy_serial_console(void) DBG(" -> check_legacy_serial_console()\n"); /* The user has requested a console so this is already set up. */ - if (strstr(saved_command_line, "console=")) { + if (strstr(boot_command_line, "console=")) { DBG(" console was specified !\n"); return -EBUSY; } diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 3be52d693eca..3e86e6e0f778 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -991,7 +991,7 @@ void __init early_init_devtree(void *params) of_scan_flat_dt(early_init_dt_scan_memory, NULL); /* Save command line for /proc/cmdline and then parse parameters */ - strlcpy(saved_command_line, cmd_line, COMMAND_LINE_SIZE); + strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE); parse_early_param(); /* Reserve LMB regions used by kernel, initrd, dt, etc... */ diff --git a/arch/powerpc/kernel/udbg.c b/arch/powerpc/kernel/udbg.c index 8f5afdbad0d5..194a93eeb3e7 100644 --- a/arch/powerpc/kernel/udbg.c +++ b/arch/powerpc/kernel/udbg.c @@ -150,7 +150,7 @@ void __init disable_early_printk(void) { if (!early_console_initialized) return; - if (strstr(saved_command_line, "udbg-immortal")) { + if (strstr(boot_command_line, "udbg-immortal")) { printk(KERN_INFO "early console immortal !\n"); return; } diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c index d949e9df41ef..651fa424ea06 100644 --- a/arch/powerpc/platforms/powermac/setup.c +++ b/arch/powerpc/platforms/powermac/setup.c @@ -506,8 +506,8 @@ void note_bootable_part(dev_t dev, int part, int goodness) if ((goodness <= current_root_goodness) && ROOT_DEV != DEFAULT_ROOT_DEVICE) return; - p = strstr(saved_command_line, "root="); - if (p != NULL && (p == saved_command_line || p[-1] == ' ')) + p = strstr(boot_command_line, "root="); + if (p != NULL && (p == boot_command_line || p[-1] == ' ')) return; if (!found_boot) { -- cgit v1.2.3 From bf71cecbe4282fbb8ec035a7199fa4aca64db54c Mon Sep 17 00:00:00 2001 From: Alon Bar-Lev Date: Mon, 12 Feb 2007 00:54:18 -0800 Subject: [PATCH] Dynamic kernel command-line: ppc Rename saved_command_line into boot_command_line. Signed-off-by: Alon Bar-Lev Cc: Paul Mackerras Cc: Benjamin Herrenschmidt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc/kernel/setup.c | 2 +- arch/ppc/platforms/lopec.c | 2 +- arch/ppc/platforms/pplus.c | 2 +- arch/ppc/platforms/prep_setup.c | 4 ++-- 4 files changed, 5 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c index 3c506af19880..c79704f5409c 100644 --- a/arch/ppc/kernel/setup.c +++ b/arch/ppc/kernel/setup.c @@ -543,7 +543,7 @@ void __init setup_arch(char **cmdline_p) init_mm.brk = (unsigned long) klimit; /* Save unparsed command line copy for /proc/cmdline */ - strlcpy(saved_command_line, cmd_line, COMMAND_LINE_SIZE); + strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE); *cmdline_p = cmd_line; parse_early_param(); diff --git a/arch/ppc/platforms/lopec.c b/arch/ppc/platforms/lopec.c index 18dc6e8dd4f4..b947c774f524 100644 --- a/arch/ppc/platforms/lopec.c +++ b/arch/ppc/platforms/lopec.c @@ -344,7 +344,7 @@ lopec_setup_arch(void) if (bootargs != NULL) { strcpy(cmd_line, bootargs); /* again.. */ - strcpy(saved_command_line, cmd_line); + strcpy(boot_command_line, cmd_line); } } #endif diff --git a/arch/ppc/platforms/pplus.c b/arch/ppc/platforms/pplus.c index 9778105d4dfe..8a1788c48155 100644 --- a/arch/ppc/platforms/pplus.c +++ b/arch/ppc/platforms/pplus.c @@ -592,7 +592,7 @@ static void __init pplus_setup_arch(void) if (bootargs != NULL) { strcpy(cmd_line, bootargs); /* again.. */ - strcpy(saved_command_line, cmd_line); + strcpy(boot_command_line, cmd_line); } } #endif diff --git a/arch/ppc/platforms/prep_setup.c b/arch/ppc/platforms/prep_setup.c index 1cb75a1f825e..f166299571d6 100644 --- a/arch/ppc/platforms/prep_setup.c +++ b/arch/ppc/platforms/prep_setup.c @@ -634,7 +634,7 @@ static void __init prep_init_sound(void) /* * Find a way to push these informations to the cs4232 driver * Give it out with printk, when not in cmd_line? - * Append it to cmd_line and saved_command_line? + * Append it to cmd_line and boot_command_line? * Format is cs4232=io,irq,dma,dma2 */ } @@ -897,7 +897,7 @@ prep_setup_arch(void) if (bootargs != NULL) { strcpy(cmd_line, bootargs); /* again.. */ - strcpy(saved_command_line, cmd_line); + strcpy(boot_command_line, cmd_line); } } -- cgit v1.2.3 From e06b1a3513bdd897e3c37c98ed7b16fa237dcb63 Mon Sep 17 00:00:00 2001 From: Alon Bar-Lev Date: Mon, 12 Feb 2007 00:54:19 -0800 Subject: [PATCH] Dynamic kernel command-line: s390 Rename saved_command_line into boot_command_line. Signed-off-by: Alon Bar-Lev Cc: Heiko Carstens Cc: Martin Schwidefsky Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/s390/kernel/setup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index 03739813d3bf..50c5210fbc64 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -740,7 +740,7 @@ setup_arch(char **cmdline_p) #endif /* CONFIG_64BIT */ /* Save unparsed command line copy for /proc/cmdline */ - strlcpy(saved_command_line, COMMAND_LINE, COMMAND_LINE_SIZE); + strlcpy(boot_command_line, COMMAND_LINE, COMMAND_LINE_SIZE); *cmdline_p = COMMAND_LINE; *(*cmdline_p + COMMAND_LINE_SIZE - 1) = '\0'; -- cgit v1.2.3 From 53c82622c2db808c015953336faecefc0ebf29bc Mon Sep 17 00:00:00 2001 From: Alon Bar-Lev Date: Mon, 12 Feb 2007 00:54:19 -0800 Subject: [PATCH] Dynamic kernel command-line: sh 1. Rename saved_command_line into boot_command_line. 2. Set command_line as __initdata. Signed-off-by: Alon Bar-Lev Acked-by: Paul Mundt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/sh/kernel/setup.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index 225f9ea5cdd7..d6b817aa568f 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -75,7 +75,7 @@ static struct sh_machine_vector* __init get_mv_byname(const char* name); #define RAMDISK_PROMPT_FLAG 0x8000 #define RAMDISK_LOAD_FLAG 0x4000 -static char command_line[COMMAND_LINE_SIZE] = { 0, }; +static char __initdata command_line[COMMAND_LINE_SIZE] = { 0, }; static struct resource code_resource = { .name = "Kernel code", }; static struct resource data_resource = { .name = "Kernel data", }; @@ -90,8 +90,8 @@ static inline void parse_cmdline (char ** cmdline_p, char mv_name[MV_NAME_SIZE], int len = 0; /* Save unparsed command line copy for /proc/cmdline */ - memcpy(saved_command_line, COMMAND_LINE, COMMAND_LINE_SIZE); - saved_command_line[COMMAND_LINE_SIZE-1] = '\0'; + memcpy(boot_command_line, COMMAND_LINE, COMMAND_LINE_SIZE); + boot_command_line[COMMAND_LINE_SIZE-1] = '\0'; memory_start = (unsigned long)PAGE_OFFSET+__MEMORY_START; memory_end = memory_start + __MEMORY_SIZE; -- cgit v1.2.3 From 3e42ff6c65cf40caa1f6ca51a4c3d552803e0957 Mon Sep 17 00:00:00 2001 From: Alon Bar-Lev Date: Mon, 12 Feb 2007 00:54:20 -0800 Subject: [PATCH] Dynamic kernel command-line: sh64 1. Rename saved_command_line into boot_command_line. 2. Set command_line as __initdata. Signed-off-by: Alon Bar-Lev Acked-by: Paul Mundt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/sh64/kernel/setup.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/sh64/kernel/setup.c b/arch/sh64/kernel/setup.c index b9e7d54d7b85..53e9d20a874a 100644 --- a/arch/sh64/kernel/setup.c +++ b/arch/sh64/kernel/setup.c @@ -83,7 +83,7 @@ extern int sh64_tlb_init(void); #define RAMDISK_PROMPT_FLAG 0x8000 #define RAMDISK_LOAD_FLAG 0x4000 -static char command_line[COMMAND_LINE_SIZE] = { 0, }; +static char __initdata command_line[COMMAND_LINE_SIZE] = { 0, }; unsigned long long memory_start = CONFIG_MEMORY_START; unsigned long long memory_end = CONFIG_MEMORY_START + (CONFIG_MEMORY_SIZE_IN_MB * 1024 * 1024); @@ -95,8 +95,8 @@ static inline void parse_mem_cmdline (char ** cmdline_p) int len = 0; /* Save unparsed command line copy for /proc/cmdline */ - memcpy(saved_command_line, COMMAND_LINE, COMMAND_LINE_SIZE); - saved_command_line[COMMAND_LINE_SIZE-1] = '\0'; + memcpy(boot_command_line, COMMAND_LINE, COMMAND_LINE_SIZE); + boot_command_line[COMMAND_LINE_SIZE-1] = '\0'; for (;;) { /* -- cgit v1.2.3 From 08e7ca11eed86acde42ee97b9392faa10f9c70d1 Mon Sep 17 00:00:00 2001 From: Alon Bar-Lev Date: Mon, 12 Feb 2007 00:54:21 -0800 Subject: [PATCH] Dynamic kernel command-line: sparc Rename saved_command_line into boot_command_line. Signed-off-by: Alon Bar-Lev Cc: William Lee Irwin III Cc: "David S. Miller" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/sparc/kernel/setup.c | 2 +- arch/sparc/kernel/sparc_ksyms.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sparc/kernel/setup.c b/arch/sparc/kernel/setup.c index 383526ad94fc..eccd8e87f529 100644 --- a/arch/sparc/kernel/setup.c +++ b/arch/sparc/kernel/setup.c @@ -246,7 +246,7 @@ void __init setup_arch(char **cmdline_p) /* Initialize PROM console and command line. */ *cmdline_p = prom_getbootargs(); - strcpy(saved_command_line, *cmdline_p); + strcpy(boot_command_line, *cmdline_p); /* Set sparc_cpu_model */ sparc_cpu_model = sun_unknown; diff --git a/arch/sparc/kernel/sparc_ksyms.c b/arch/sparc/kernel/sparc_ksyms.c index d8e008a04e2b..bba1b0e02f94 100644 --- a/arch/sparc/kernel/sparc_ksyms.c +++ b/arch/sparc/kernel/sparc_ksyms.c @@ -229,7 +229,7 @@ EXPORT_SYMBOL(prom_getproplen); EXPORT_SYMBOL(prom_getproperty); EXPORT_SYMBOL(prom_node_has_property); EXPORT_SYMBOL(prom_setprop); -EXPORT_SYMBOL(saved_command_line); +EXPORT_SYMBOL(boot_command_line); EXPORT_SYMBOL(prom_apply_obio_ranges); EXPORT_SYMBOL(prom_feval); EXPORT_SYMBOL(prom_getbool); -- cgit v1.2.3 From 383464c0fb067f5beb96e28ff376d2280808dd54 Mon Sep 17 00:00:00 2001 From: Alon Bar-Lev Date: Mon, 12 Feb 2007 00:54:22 -0800 Subject: [PATCH] Dynamic kernel command-line: sparc64 Rename saved_command_line into boot_command_line. Signed-off-by: Alon Bar-Lev Cc: "David S. Miller" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/sparc64/kernel/setup.c | 2 +- arch/sparc64/kernel/sparc64_ksyms.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c index bf033b31d437..451028341c75 100644 --- a/arch/sparc64/kernel/setup.c +++ b/arch/sparc64/kernel/setup.c @@ -315,7 +315,7 @@ void __init setup_arch(char **cmdline_p) { /* Initialize PROM console and command line. */ *cmdline_p = prom_getbootargs(); - strcpy(saved_command_line, *cmdline_p); + strcpy(boot_command_line, *cmdline_p); if (tlb_type == hypervisor) printk("ARCH: SUN4V\n"); diff --git a/arch/sparc64/kernel/sparc64_ksyms.c b/arch/sparc64/kernel/sparc64_ksyms.c index beffc82a1e85..f7d78e05e7fc 100644 --- a/arch/sparc64/kernel/sparc64_ksyms.c +++ b/arch/sparc64/kernel/sparc64_ksyms.c @@ -253,7 +253,7 @@ EXPORT_SYMBOL(prom_getproplen); EXPORT_SYMBOL(prom_getproperty); EXPORT_SYMBOL(prom_node_has_property); EXPORT_SYMBOL(prom_setprop); -EXPORT_SYMBOL(saved_command_line); +EXPORT_SYMBOL(boot_command_line); EXPORT_SYMBOL(prom_finddevice); EXPORT_SYMBOL(prom_feval); EXPORT_SYMBOL(prom_getbool); -- cgit v1.2.3 From 19bf7e7a414711dec0058556feda778105798f99 Mon Sep 17 00:00:00 2001 From: Alon Bar-Lev Date: Mon, 12 Feb 2007 00:54:23 -0800 Subject: [PATCH] Dynamic kernel command-line: um 1. Rename saved_command_line into boot_command_line. 2. Set command_line as __initdata. Signed-off-by: Alon Bar-Lev Cc: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/include/user_util.h | 2 +- arch/um/kernel/um_arch.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/um/include/user_util.h b/arch/um/include/user_util.h index 06625fefef33..0f63003a2a35 100644 --- a/arch/um/include/user_util.h +++ b/arch/um/include/user_util.h @@ -38,7 +38,7 @@ extern unsigned long long highmem; extern char host_info[]; -extern char saved_command_line[]; +extern char __initdata boot_command_line[]; extern unsigned long _stext, _etext, _sdata, _edata, __bss_start, _end; extern unsigned long _unprotected_end; diff --git a/arch/um/kernel/um_arch.c b/arch/um/kernel/um_arch.c index 84e57f6da1d3..668eba2d2e83 100644 --- a/arch/um/kernel/um_arch.c +++ b/arch/um/kernel/um_arch.c @@ -481,7 +481,7 @@ void __init setup_arch(char **cmdline_p) atomic_notifier_chain_register(&panic_notifier_list, &panic_exit_notifier); paging_init(); - strlcpy(saved_command_line, command_line, COMMAND_LINE_SIZE); + strlcpy(boot_command_line, command_line, COMMAND_LINE_SIZE); *cmdline_p = command_line; setup_hostinfo(); } -- cgit v1.2.3 From 712f77b5659208b43c925e1b28c4f44891c4d94f Mon Sep 17 00:00:00 2001 From: Alon Bar-Lev Date: Mon, 12 Feb 2007 00:54:24 -0800 Subject: [PATCH] Dynamic kernel command-line: v850 1. Rename saved_command_line into boot_command_line. 2. Set command_line as __initdata. Signed-off-by: Alon Bar-Lev Cc: Miles Bader Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/v850/kernel/setup.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/v850/kernel/setup.c b/arch/v850/kernel/setup.c index 1bf672a25692..a914f244f494 100644 --- a/arch/v850/kernel/setup.c +++ b/arch/v850/kernel/setup.c @@ -42,7 +42,7 @@ extern char _root_fs_image_start __attribute__ ((__weak__)); extern char _root_fs_image_end __attribute__ ((__weak__)); -char command_line[COMMAND_LINE_SIZE]; +char __initdata command_line[COMMAND_LINE_SIZE]; /* Memory not used by the kernel. */ static unsigned long total_ram_pages; @@ -64,8 +64,8 @@ void __init setup_arch (char **cmdline) { /* Keep a copy of command line */ *cmdline = command_line; - memcpy (saved_command_line, command_line, COMMAND_LINE_SIZE); - saved_command_line[COMMAND_LINE_SIZE - 1] = '\0'; + memcpy (boot_command_line, command_line, COMMAND_LINE_SIZE); + boot_command_line[COMMAND_LINE_SIZE - 1] = '\0'; console_verbose (); -- cgit v1.2.3 From adf48856db47f4f0f661f2f4b7004890408135cf Mon Sep 17 00:00:00 2001 From: Alon Bar-Lev Date: Mon, 12 Feb 2007 00:54:25 -0800 Subject: [PATCH] Dynamic kernel command-line: x86_64 1. Rename saved_command_line into boot_command_line. 2. Set command_line as __initdata. Signed-off-by: Alon Bar-Lev Cc: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86_64/kernel/head64.c | 4 ++-- arch/x86_64/kernel/setup.c | 6 +++--- 2 files changed, 5 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/head64.c b/arch/x86_64/kernel/head64.c index cc230b93cd1c..be4bfb43d6dd 100644 --- a/arch/x86_64/kernel/head64.c +++ b/arch/x86_64/kernel/head64.c @@ -34,7 +34,7 @@ static void __init clear_bss(void) #define OLD_CL_BASE_ADDR 0x90000 #define OLD_CL_OFFSET 0x90022 -extern char saved_command_line[]; +extern char __initdata boot_command_line[]; static void __init copy_bootdata(char *real_mode_data) { @@ -50,7 +50,7 @@ static void __init copy_bootdata(char *real_mode_data) new_data = OLD_CL_BASE_ADDR + * (u16 *) OLD_CL_OFFSET; } command_line = (char *) ((u64)(new_data)); - memcpy(saved_command_line, command_line, COMMAND_LINE_SIZE); + memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE); } void __init x86_64_start_kernel(char * real_mode_data) diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c index af425a8049fb..60477244d1a3 100644 --- a/arch/x86_64/kernel/setup.c +++ b/arch/x86_64/kernel/setup.c @@ -100,7 +100,7 @@ EXPORT_SYMBOL_GPL(edid_info); extern int root_mountflags; -char command_line[COMMAND_LINE_SIZE]; +char __initdata command_line[COMMAND_LINE_SIZE]; struct resource standard_io_resources[] = { { .name = "dma1", .start = 0x00, .end = 0x1f, @@ -343,7 +343,7 @@ static void discover_ebda(void) void __init setup_arch(char **cmdline_p) { - printk(KERN_INFO "Command line: %s\n", saved_command_line); + printk(KERN_INFO "Command line: %s\n", boot_command_line); ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV); screen_info = SCREEN_INFO; @@ -373,7 +373,7 @@ void __init setup_arch(char **cmdline_p) early_identify_cpu(&boot_cpu_data); - strlcpy(command_line, saved_command_line, COMMAND_LINE_SIZE); + strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE); *cmdline_p = command_line; parse_early_param(); -- cgit v1.2.3 From d3e9cceafd9c886561f602bcdcb03efd96e187ab Mon Sep 17 00:00:00 2001 From: Alon Bar-Lev Date: Mon, 12 Feb 2007 00:54:25 -0800 Subject: [PATCH] Dynamic kernel command-line: xtensa 1. Rename saved_command_line into boot_command_line. 2. Set command_line as __initdata. Signed-off-by: Alon Bar-Lev Cc: Chris Zankel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/xtensa/kernel/setup.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c index b6374c09de20..1ecf6716c327 100644 --- a/arch/xtensa/kernel/setup.c +++ b/arch/xtensa/kernel/setup.c @@ -78,7 +78,7 @@ extern unsigned long loops_per_jiffy; /* Command line specified as configuration option. */ -static char command_line[COMMAND_LINE_SIZE]; +static char __initdata command_line[COMMAND_LINE_SIZE]; #ifdef CONFIG_CMDLINE_BOOL static char default_command_line[COMMAND_LINE_SIZE] __initdata = CONFIG_CMDLINE; @@ -253,8 +253,8 @@ void __init setup_arch(char **cmdline_p) extern int mem_reserve(unsigned long, unsigned long, int); extern void bootmem_init(void); - memcpy(saved_command_line, command_line, COMMAND_LINE_SIZE); - saved_command_line[COMMAND_LINE_SIZE-1] = '\0'; + memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE); + boot_command_line[COMMAND_LINE_SIZE-1] = '\0'; *cmdline_p = command_line; /* Reserve some memory regions */ -- cgit v1.2.3 From 7a3a06d0e158fc82a6bf13e18439285c7791d2b8 Mon Sep 17 00:00:00 2001 From: Alon Bar-Lev Date: Mon, 12 Feb 2007 00:54:26 -0800 Subject: [PATCH] Dynamic kernel command-line: fixups Remove in-source externs, linux/init.h is included in all cases. This is a fixups for "Dynamic kernel command-line" patch. It also includes some uml __init fixups so that we can __initdata also its command_line. Signed-off-by: Alon Bar-Lev Cc: Jeff Dike Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ia64/kernel/efi.c | 2 -- arch/ia64/kernel/sal.c | 2 -- arch/parisc/mm/init.c | 1 - arch/um/include/user_util.h | 2 -- arch/um/kernel/um_arch.c | 6 +++--- arch/x86_64/kernel/head64.c | 2 -- 6 files changed, 3 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/efi.c b/arch/ia64/kernel/efi.c index b12d6d13202a..772ba6fe110f 100644 --- a/arch/ia64/kernel/efi.c +++ b/arch/ia64/kernel/efi.c @@ -405,8 +405,6 @@ efi_map_pal_code (void) ia64_srlz_i(); } -extern char __initdata boot_command_line[]; - void __init efi_init (void) { diff --git a/arch/ia64/kernel/sal.c b/arch/ia64/kernel/sal.c index 831d57f257db..37c876f95dba 100644 --- a/arch/ia64/kernel/sal.c +++ b/arch/ia64/kernel/sal.c @@ -190,8 +190,6 @@ sal_desc_ap_wakeup (void *p) } } -extern char __initdata boot_command_line[]; - static void __init chk_nointroute_opt(void) { diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c index f355fb591e7f..12117db0043b 100644 --- a/arch/parisc/mm/init.c +++ b/arch/parisc/mm/init.c @@ -77,7 +77,6 @@ static void __init mem_limit_func(void) { char *cp, *end; unsigned long limit; - extern char __initdata boot_command_line[]; /* We need this before __setup() functions are called */ diff --git a/arch/um/include/user_util.h b/arch/um/include/user_util.h index 0f63003a2a35..023575f67343 100644 --- a/arch/um/include/user_util.h +++ b/arch/um/include/user_util.h @@ -38,8 +38,6 @@ extern unsigned long long highmem; extern char host_info[]; -extern char __initdata boot_command_line[]; - extern unsigned long _stext, _etext, _sdata, _edata, __bss_start, _end; extern unsigned long _unprotected_end; extern unsigned long brk_start; diff --git a/arch/um/kernel/um_arch.c b/arch/um/kernel/um_arch.c index 668eba2d2e83..89c6dba731f8 100644 --- a/arch/um/kernel/um_arch.c +++ b/arch/um/kernel/um_arch.c @@ -43,9 +43,9 @@ #define DEFAULT_COMMAND_LINE "root=98:0" /* Changed in linux_main and setup_arch, which run before SMP is started */ -static char command_line[COMMAND_LINE_SIZE] = { 0 }; +static char __initdata command_line[COMMAND_LINE_SIZE] = { 0 }; -static void add_arg(char *arg) +static void __init add_arg(char *arg) { if (strlen(command_line) + strlen(arg) + 1 > COMMAND_LINE_SIZE) { printf("add_arg: Too many command line arguments!\n"); @@ -330,7 +330,7 @@ EXPORT_SYMBOL(end_iomem); extern char __binary_start; -int linux_main(int argc, char **argv) +int __init linux_main(int argc, char **argv) { unsigned long avail, diff; unsigned long virtmem_size, max_physmem; diff --git a/arch/x86_64/kernel/head64.c b/arch/x86_64/kernel/head64.c index be4bfb43d6dd..5f197b0a330a 100644 --- a/arch/x86_64/kernel/head64.c +++ b/arch/x86_64/kernel/head64.c @@ -34,8 +34,6 @@ static void __init clear_bss(void) #define OLD_CL_BASE_ADDR 0x90000 #define OLD_CL_OFFSET 0x90022 -extern char __initdata boot_command_line[]; - static void __init copy_bootdata(char *real_mode_data) { int new_data; -- cgit v1.2.3 From 11227fd1922dc5dda691586852cfd220dd383f37 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 12 Feb 2007 00:55:16 -0800 Subject: [PATCH] ps3: AV Settings Driver Add the PS3 AV Settings Driver. The AV Settings driver is used to control Audio and Video settings. It communicates with the policy manager through the virtual uart. Signed-off-by: Geert Uytterhoeven Cc: James Simmons Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/powerpc/platforms/ps3/Kconfig | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/platforms/ps3/Kconfig b/arch/powerpc/platforms/ps3/Kconfig index de52ec4e9e58..4be3943d1c0d 100644 --- a/arch/powerpc/platforms/ps3/Kconfig +++ b/arch/powerpc/platforms/ps3/Kconfig @@ -51,4 +51,15 @@ config PS3_VUART including the System Manager and AV Settings. In general, all users will say Y. +config PS3_PS3AV + tristate "PS3 AV settings driver" + depends on PPC_PS3 + select PS3_VUART + default y + help + Include support for the PS3 AV Settings driver. + + This support is required for graphics and sound. In + general, all users will say Y or M. + endmenu -- cgit v1.2.3 From fbdb3e5be36619c4acf415d870eceab4cbce2850 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 12 Feb 2007 00:55:22 -0800 Subject: [PATCH] ps3: Preallocate bootmem memory for ps3fb Preallocate bootmem memory for the PS3 frame buffer device, which needs a large block of physically-contiguous memory. The size of this memory block is configurable: - The config option CONFIG_FB_PS3_DEFAULT_SIZE_M allows to specify the default amount of memory (in MiB) allocated to the virtual frame buffer. - The early boot parameter `ps3fb=xxx' allows to override the default value. It will be rounded up to a multiple of 1 MiB, if needed. Signed-off-by: Geert Uytterhoeven Signed-off-by: Geoff Levand Cc: James Simmons Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/powerpc/platforms/ps3/setup.c | 42 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/platforms/ps3/setup.c b/arch/powerpc/platforms/ps3/setup.c index e62505e18813..13d669a8ecae 100644 --- a/arch/powerpc/platforms/ps3/setup.c +++ b/arch/powerpc/platforms/ps3/setup.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include @@ -80,6 +81,46 @@ static void ps3_panic(char *str) for (;;) ; } + +static void prealloc(struct ps3_prealloc *p) +{ + if (!p->size) + return; + + p->address = __alloc_bootmem(p->size, p->align, __pa(MAX_DMA_ADDRESS)); + if (!p->address) { + printk(KERN_ERR "%s: Cannot allocate %s\n", __FUNCTION__, + p->name); + return; + } + + printk(KERN_INFO "%s: %lu bytes at %p\n", p->name, p->size, + p->address); +} + +#ifdef CONFIG_FB_PS3 +struct ps3_prealloc ps3fb_videomemory = { + .name = "ps3fb videomemory", + .size = CONFIG_FB_PS3_DEFAULT_SIZE_M*1024*1024, + .align = 1024*1024 /* the GPU requires 1 MiB alignment */ +}; +#define prealloc_ps3fb_videomemory() prealloc(&ps3fb_videomemory) + +static int __init early_parse_ps3fb(char *p) +{ + if (!p) + return 1; + + ps3fb_videomemory.size = _ALIGN_UP(memparse(p, &p), + ps3fb_videomemory.align); + return 0; +} +early_param("ps3fb", early_parse_ps3fb); +#else +#define prealloc_ps3fb_videomemory() do { } while (0) +#endif + + static void __init ps3_setup_arch(void) { union ps3_firmware_version v; @@ -101,6 +142,7 @@ static void __init ps3_setup_arch(void) conswitchp = &dummy_con; #endif + prealloc_ps3fb_videomemory(); ppc_md.power_save = ps3_power_save; DBG(" <- %s:%d\n", __func__, __LINE__); -- cgit v1.2.3 From 36dff96b3b83c5d79a45b221adf137b571b03d65 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 12 Feb 2007 00:55:26 -0800 Subject: [PATCH] ps3: cleanup ps3fb before clearing HPTE PS3: Cleanup the frame buffer device before clearing the HPTE mapping Signed-off-by: Geert Uytterhoeven Cc: James Simmons Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/powerpc/platforms/ps3/htab.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/ps3/htab.c b/arch/powerpc/platforms/ps3/htab.c index a4b5a1bc60f4..e12e59fea13a 100644 --- a/arch/powerpc/platforms/ps3/htab.c +++ b/arch/powerpc/platforms/ps3/htab.c @@ -2,7 +2,7 @@ * PS3 pagetable management routines. * * Copyright (C) 2006 Sony Computer Entertainment Inc. - * Copyright 2006 Sony Corp. + * Copyright 2006, 2007 Sony Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -24,6 +24,7 @@ #include #include #include +#include #include "platform.h" @@ -233,6 +234,9 @@ static void ps3_hpte_invalidate(unsigned long slot, unsigned long va, static void ps3_hpte_clear(void) { + /* Make sure to clean up the frame buffer device first */ + ps3fb_cleanup(); + lv1_unmap_htab(htab_addr); } -- cgit v1.2.3 From f59e5e82096f81a2cb7d7833001956d81e9fa6fb Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 12 Feb 2007 00:55:27 -0800 Subject: [PATCH] ps3: ps3av/fb defconfig updates PS3: defconfig updates for ps3av and ps3fb Signed-off-by: Geert Uytterhoeven Cc: James Simmons Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/powerpc/configs/ps3_defconfig | 29 ++++++++++++++++++++++++++++- 1 file changed, 28 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig index ec644b34a082..0345a2ceec59 100644 --- a/arch/powerpc/configs/ps3_defconfig +++ b/arch/powerpc/configs/ps3_defconfig @@ -163,6 +163,7 @@ CONFIG_PS3_HTAB_SIZE=20 # CONFIG_PS3_DYNAMIC_DMA is not set CONFIG_PS3_USE_LPAR_ADDR=y CONFIG_PS3_VUART=y +CONFIG_PS3_PS3AV=y # # Kernel options @@ -611,14 +612,40 @@ CONFIG_GEN_RTC=y # Graphics support # # CONFIG_FIRMWARE_EDID is not set -# CONFIG_FB is not set +CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set +# CONFIG_FB_OF is not set +# CONFIG_FB_VGA16 is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_IBM_GXT4500 is not set +CONFIG_FB_PS3=y +CONFIG_FB_PS3_DEFAULT_SIZE_M=18 +# CONFIG_FB_VIRTUAL is not set # # Console display driver support # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y + +# +# Logo configuration +# +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -- cgit v1.2.3 From 5dfe4c964a0dd7bb3a1d64a4166835a153146207 Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Mon, 12 Feb 2007 00:55:31 -0800 Subject: [PATCH] mark struct file_operations const 2 Many struct file_operations in the kernel can be "const". Marking them const moves these to the .rodata section, which avoids false sharing with potential dirty data. In addition it'll catch accidental writes at compile time to these shared resources. [akpm@osdl.org: sparc64 fix] Signed-off-by: Arjan van de Ven Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/arm/common/rtctime.c | 2 +- arch/arm/mach-at91rm9200/clock.c | 2 +- arch/avr32/mm/tlb.c | 2 +- arch/cris/arch-v10/drivers/ds1302.c | 2 +- arch/cris/arch-v10/drivers/eeprom.c | 2 +- arch/cris/arch-v10/drivers/gpio.c | 2 +- arch/cris/arch-v10/drivers/i2c.c | 2 +- arch/cris/arch-v10/drivers/pcf8563.c | 2 +- arch/cris/arch-v32/drivers/cryptocop.c | 2 +- arch/cris/arch-v32/drivers/gpio.c | 2 +- arch/cris/arch-v32/drivers/i2c.c | 2 +- arch/cris/arch-v32/drivers/pcf8563.c | 2 +- arch/cris/arch-v32/drivers/sync_serial.c | 2 +- arch/cris/kernel/profile.c | 2 +- arch/i386/kernel/apm.c | 2 +- arch/i386/kernel/cpu/mtrr/if.c | 2 +- arch/i386/kernel/cpuid.c | 2 +- arch/i386/kernel/microcode.c | 2 +- arch/i386/kernel/msr.c | 2 +- arch/ia64/hp/common/sba_iommu.c | 2 +- arch/ia64/kernel/perfmon.c | 6 ++--- arch/ia64/kernel/salinfo.c | 4 +-- arch/ia64/sn/kernel/sn2/sn2_smp.c | 2 +- arch/ia64/sn/kernel/sn2/sn_hwperf.c | 2 +- arch/m68k/bvme6000/rtc.c | 2 +- arch/m68k/mvme16x/rtc.c | 2 +- arch/mips/kernel/rtlx.c | 2 +- arch/mips/kernel/vpe.c | 2 +- arch/mips/sibyte/sb1250/bcm1250_tbprof.c | 2 +- arch/parisc/kernel/perf.c | 2 +- arch/powerpc/kernel/lparcfg.c | 2 +- arch/powerpc/kernel/nvram_64.c | 2 +- arch/powerpc/kernel/proc_ppc64.c | 2 +- arch/powerpc/kernel/rtas-proc.c | 14 +++++----- arch/powerpc/kernel/rtas_flash.c | 8 +++--- arch/powerpc/platforms/cell/spufs/file.c | 40 ++++++++++++++-------------- arch/powerpc/platforms/cell/spufs/inode.c | 4 +-- arch/powerpc/platforms/iseries/lpevents.c | 2 +- arch/powerpc/platforms/iseries/mf.c | 2 +- arch/powerpc/platforms/iseries/proc.c | 2 +- arch/powerpc/platforms/iseries/viopath.c | 2 +- arch/powerpc/platforms/pseries/eeh.c | 2 +- arch/powerpc/platforms/pseries/hvCall_inst.c | 2 +- arch/powerpc/platforms/pseries/reconfig.c | 2 +- arch/powerpc/platforms/pseries/rtasd.c | 2 +- arch/powerpc/platforms/pseries/scanlog.c | 2 +- arch/ppc/8xx_io/cs4218_tdm.c | 6 ++--- arch/s390/hypfs/inode.c | 4 +-- arch/s390/kernel/debug.c | 2 +- arch/sh/boards/landisk/landisk_pwb.c | 2 +- arch/sh/mm/cache-debugfs.c | 2 +- arch/sh/mm/pmb.c | 2 +- arch/sh/oprofile/op_model_sh7750.c | 2 +- arch/sparc/kernel/apc.c | 2 +- arch/sparc64/kernel/time.c | 2 +- arch/sparc64/solaris/socksys.c | 2 +- arch/um/drivers/harddog_kern.c | 2 +- arch/v850/kernel/rte_cb_leds.c | 2 +- arch/x86_64/kernel/mce.c | 2 +- 59 files changed, 94 insertions(+), 94 deletions(-) (limited to 'arch') diff --git a/arch/arm/common/rtctime.c b/arch/arm/common/rtctime.c index 4e5445cfb0ea..bf1075e1f571 100644 --- a/arch/arm/common/rtctime.c +++ b/arch/arm/common/rtctime.c @@ -329,7 +329,7 @@ static int rtc_fasync(int fd, struct file *file, int on) return fasync_helper(fd, file, on, &rtc_async_queue); } -static struct file_operations rtc_fops = { +static const struct file_operations rtc_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .read = rtc_read, diff --git a/arch/arm/mach-at91rm9200/clock.c b/arch/arm/mach-at91rm9200/clock.c index 4dee21fefe5a..36a8e4d1cc6d 100644 --- a/arch/arm/mach-at91rm9200/clock.c +++ b/arch/arm/mach-at91rm9200/clock.c @@ -407,7 +407,7 @@ static int at91_clk_open(struct inode *inode, struct file *file) return single_open(file, at91_clk_show, NULL); } -static struct file_operations at91_clk_operations = { +static const struct file_operations at91_clk_operations = { .open = at91_clk_open, .read = seq_read, .llseek = seq_lseek, diff --git a/arch/avr32/mm/tlb.c b/arch/avr32/mm/tlb.c index 7b073052203d..56672018e42f 100644 --- a/arch/avr32/mm/tlb.c +++ b/arch/avr32/mm/tlb.c @@ -360,7 +360,7 @@ static int tlb_open(struct inode *inode, struct file *file) return seq_open(file, &tlb_ops); } -static struct file_operations proc_tlb_operations = { +static const struct file_operations proc_tlb_operations = { .open = tlb_open, .read = seq_read, .llseek = seq_lseek, diff --git a/arch/cris/arch-v10/drivers/ds1302.c b/arch/cris/arch-v10/drivers/ds1302.c index 3cf4f23de1d0..88eff7f54ea6 100644 --- a/arch/cris/arch-v10/drivers/ds1302.c +++ b/arch/cris/arch-v10/drivers/ds1302.c @@ -499,7 +499,7 @@ print_rtc_status(void) /* The various file operations we support. */ -static struct file_operations rtc_fops = { +static const struct file_operations rtc_fops = { .owner = THIS_MODULE, .ioctl = rtc_ioctl, }; diff --git a/arch/cris/arch-v10/drivers/eeprom.c b/arch/cris/arch-v10/drivers/eeprom.c index 284ebfda03f0..be35a70798aa 100644 --- a/arch/cris/arch-v10/drivers/eeprom.c +++ b/arch/cris/arch-v10/drivers/eeprom.c @@ -172,7 +172,7 @@ static const char eeprom_name[] = "eeprom"; static struct eeprom_type eeprom; /* This is the exported file-operations structure for this device. */ -struct file_operations eeprom_fops = +const struct file_operations eeprom_fops = { .llseek = eeprom_lseek, .read = eeprom_read, diff --git a/arch/cris/arch-v10/drivers/gpio.c b/arch/cris/arch-v10/drivers/gpio.c index 9aba18b931dd..f389ed6998fe 100644 --- a/arch/cris/arch-v10/drivers/gpio.c +++ b/arch/cris/arch-v10/drivers/gpio.c @@ -838,7 +838,7 @@ gpio_leds_ioctl(unsigned int cmd, unsigned long arg) return 0; } -struct file_operations gpio_fops = { +const struct file_operations gpio_fops = { .owner = THIS_MODULE, .poll = gpio_poll, .ioctl = gpio_ioctl, diff --git a/arch/cris/arch-v10/drivers/i2c.c b/arch/cris/arch-v10/drivers/i2c.c index 092c724a645f..aca81ddaf60f 100644 --- a/arch/cris/arch-v10/drivers/i2c.c +++ b/arch/cris/arch-v10/drivers/i2c.c @@ -692,7 +692,7 @@ i2c_ioctl(struct inode *inode, struct file *file, return 0; } -static struct file_operations i2c_fops = { +static const struct file_operations i2c_fops = { .owner = THIS_MODULE, .ioctl = i2c_ioctl, .open = i2c_open, diff --git a/arch/cris/arch-v10/drivers/pcf8563.c b/arch/cris/arch-v10/drivers/pcf8563.c index 8c830eefc89c..107796e50149 100644 --- a/arch/cris/arch-v10/drivers/pcf8563.c +++ b/arch/cris/arch-v10/drivers/pcf8563.c @@ -56,7 +56,7 @@ static const unsigned char days_in_month[] = int pcf8563_ioctl(struct inode *, struct file *, unsigned int, unsigned long); -static struct file_operations pcf8563_fops = { +static const struct file_operations pcf8563_fops = { .owner = THIS_MODULE, .ioctl = pcf8563_ioctl, }; diff --git a/arch/cris/arch-v32/drivers/cryptocop.c b/arch/cris/arch-v32/drivers/cryptocop.c index 2449637e6fc0..1a071f17446d 100644 --- a/arch/cris/arch-v32/drivers/cryptocop.c +++ b/arch/cris/arch-v32/drivers/cryptocop.c @@ -266,7 +266,7 @@ static void print_user_dma_lists(struct cryptocop_dma_list_operation *dma_op); -struct file_operations cryptocop_fops = { +const struct file_operations cryptocop_fops = { owner: THIS_MODULE, open: cryptocop_open, release: cryptocop_release, diff --git a/arch/cris/arch-v32/drivers/gpio.c b/arch/cris/arch-v32/drivers/gpio.c index 08d36f0955c6..d82c5c561135 100644 --- a/arch/cris/arch-v32/drivers/gpio.c +++ b/arch/cris/arch-v32/drivers/gpio.c @@ -705,7 +705,7 @@ gpio_leds_ioctl(unsigned int cmd, unsigned long arg) return 0; } -struct file_operations gpio_fops = { +const struct file_operations gpio_fops = { .owner = THIS_MODULE, .poll = gpio_poll, .ioctl = gpio_ioctl, diff --git a/arch/cris/arch-v32/drivers/i2c.c b/arch/cris/arch-v32/drivers/i2c.c index 95f00188c628..5d6c52737df3 100644 --- a/arch/cris/arch-v32/drivers/i2c.c +++ b/arch/cris/arch-v32/drivers/i2c.c @@ -573,7 +573,7 @@ i2c_ioctl(struct inode *inode, struct file *file, return 0; } -static struct file_operations i2c_fops = { +static const struct file_operations i2c_fops = { owner: THIS_MODULE, ioctl: i2c_ioctl, open: i2c_open, diff --git a/arch/cris/arch-v32/drivers/pcf8563.c b/arch/cris/arch-v32/drivers/pcf8563.c index 2fc7d75a35de..544ab0179411 100644 --- a/arch/cris/arch-v32/drivers/pcf8563.c +++ b/arch/cris/arch-v32/drivers/pcf8563.c @@ -50,7 +50,7 @@ int pcf8563_ioctl(struct inode *, struct file *, unsigned int, unsigned long); int pcf8563_open(struct inode *, struct file *); int pcf8563_release(struct inode *, struct file *); -static struct file_operations pcf8563_fops = { +static const struct file_operations pcf8563_fops = { owner: THIS_MODULE, ioctl: pcf8563_ioctl, open: pcf8563_open, diff --git a/arch/cris/arch-v32/drivers/sync_serial.c b/arch/cris/arch-v32/drivers/sync_serial.c index 424eb0eb1cd5..df89298aafc4 100644 --- a/arch/cris/arch-v32/drivers/sync_serial.c +++ b/arch/cris/arch-v32/drivers/sync_serial.c @@ -187,7 +187,7 @@ static struct sync_port ports[]= #define NUMBER_OF_PORTS (sizeof(ports)/sizeof(sync_port)) -static struct file_operations sync_serial_fops = { +static const struct file_operations sync_serial_fops = { .owner = THIS_MODULE, .write = sync_serial_write, .read = sync_serial_read, diff --git a/arch/cris/kernel/profile.c b/arch/cris/kernel/profile.c index f60ab785f235..4cfcae620507 100644 --- a/arch/cris/kernel/profile.c +++ b/arch/cris/kernel/profile.c @@ -50,7 +50,7 @@ write_cris_profile(struct file *file, const char __user *buf, memset(sample_buffer, 0, SAMPLE_BUFFER_SIZE); } -static struct file_operations cris_proc_profile_operations = { +static const struct file_operations cris_proc_profile_operations = { .read = read_cris_profile, .write = write_cris_profile, }; diff --git a/arch/i386/kernel/apm.c b/arch/i386/kernel/apm.c index 199016927541..db99a8948dae 100644 --- a/arch/i386/kernel/apm.c +++ b/arch/i386/kernel/apm.c @@ -1894,7 +1894,7 @@ static int __init apm_setup(char *str) __setup("apm=", apm_setup); #endif -static struct file_operations apm_bios_fops = { +static const struct file_operations apm_bios_fops = { .owner = THIS_MODULE, .read = do_read, .poll = do_poll, diff --git a/arch/i386/kernel/cpu/mtrr/if.c b/arch/i386/kernel/cpu/mtrr/if.c index 5ae1705eafa6..ee771f305f96 100644 --- a/arch/i386/kernel/cpu/mtrr/if.c +++ b/arch/i386/kernel/cpu/mtrr/if.c @@ -339,7 +339,7 @@ static int mtrr_open(struct inode *inode, struct file *file) return single_open(file, mtrr_seq_show, NULL); } -static struct file_operations mtrr_fops = { +static const struct file_operations mtrr_fops = { .owner = THIS_MODULE, .open = mtrr_open, .read = seq_read, diff --git a/arch/i386/kernel/cpuid.c b/arch/i386/kernel/cpuid.c index 51130b39cd2e..4da75fa3208d 100644 --- a/arch/i386/kernel/cpuid.c +++ b/arch/i386/kernel/cpuid.c @@ -148,7 +148,7 @@ static int cpuid_open(struct inode *inode, struct file *file) /* * File operations we support */ -static struct file_operations cpuid_fops = { +static const struct file_operations cpuid_fops = { .owner = THIS_MODULE, .llseek = cpuid_seek, .read = cpuid_read, diff --git a/arch/i386/kernel/microcode.c b/arch/i386/kernel/microcode.c index c8fa13721bcb..381252bae3d8 100644 --- a/arch/i386/kernel/microcode.c +++ b/arch/i386/kernel/microcode.c @@ -451,7 +451,7 @@ static ssize_t microcode_write (struct file *file, const char __user *buf, size_ return ret; } -static struct file_operations microcode_fops = { +static const struct file_operations microcode_fops = { .owner = THIS_MODULE, .write = microcode_write, .open = microcode_open, diff --git a/arch/i386/kernel/msr.c b/arch/i386/kernel/msr.c index 4a472a17d1c6..4e14264f392a 100644 --- a/arch/i386/kernel/msr.c +++ b/arch/i386/kernel/msr.c @@ -230,7 +230,7 @@ static int msr_open(struct inode *inode, struct file *file) /* * File operations we support */ -static struct file_operations msr_fops = { +static const struct file_operations msr_fops = { .owner = THIS_MODULE, .llseek = msr_seek, .read = msr_read, diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c index ce49fe3a3b56..c1dca226b479 100644 --- a/arch/ia64/hp/common/sba_iommu.c +++ b/arch/ia64/hp/common/sba_iommu.c @@ -1881,7 +1881,7 @@ ioc_open(struct inode *inode, struct file *file) return seq_open(file, &ioc_seq_ops); } -static struct file_operations ioc_fops = { +static const struct file_operations ioc_fops = { .open = ioc_open, .read = seq_read, .llseek = seq_lseek, diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c index 86e144f321ff..9860794a68fb 100644 --- a/arch/ia64/kernel/perfmon.c +++ b/arch/ia64/kernel/perfmon.c @@ -621,7 +621,7 @@ EXPORT_PER_CPU_SYMBOL_GPL(pfm_syst_info); /* forward declaration */ -static struct file_operations pfm_file_ops; +static const struct file_operations pfm_file_ops; /* * forward declarations @@ -2126,7 +2126,7 @@ pfm_no_open(struct inode *irrelevant, struct file *dontcare) -static struct file_operations pfm_file_ops = { +static const struct file_operations pfm_file_ops = { .llseek = no_llseek, .read = pfm_read, .write = pfm_write, @@ -6596,7 +6596,7 @@ found: return 0; } -static struct file_operations pfm_proc_fops = { +static const struct file_operations pfm_proc_fops = { .open = pfm_proc_open, .read = seq_read, .llseek = seq_lseek, diff --git a/arch/ia64/kernel/salinfo.c b/arch/ia64/kernel/salinfo.c index e375a2f0f2c3..af9f8754d847 100644 --- a/arch/ia64/kernel/salinfo.c +++ b/arch/ia64/kernel/salinfo.c @@ -352,7 +352,7 @@ retry: return size; } -static struct file_operations salinfo_event_fops = { +static const struct file_operations salinfo_event_fops = { .open = salinfo_event_open, .read = salinfo_event_read, }; @@ -568,7 +568,7 @@ salinfo_log_write(struct file *file, const char __user *buffer, size_t count, lo return count; } -static struct file_operations salinfo_data_fops = { +static const struct file_operations salinfo_data_fops = { .open = salinfo_log_open, .release = salinfo_log_release, .read = salinfo_log_read, diff --git a/arch/ia64/sn/kernel/sn2/sn2_smp.c b/arch/ia64/sn/kernel/sn2/sn2_smp.c index d9d306c79f2d..601747b1e22a 100644 --- a/arch/ia64/sn/kernel/sn2/sn2_smp.c +++ b/arch/ia64/sn/kernel/sn2/sn2_smp.c @@ -455,7 +455,7 @@ static int sn2_ptc_proc_open(struct inode *inode, struct file *file) return seq_open(file, &sn2_ptc_seq_ops); } -static struct file_operations proc_sn2_ptc_operations = { +static const struct file_operations proc_sn2_ptc_operations = { .open = sn2_ptc_proc_open, .read = seq_read, .llseek = seq_lseek, diff --git a/arch/ia64/sn/kernel/sn2/sn_hwperf.c b/arch/ia64/sn/kernel/sn2/sn_hwperf.c index 33367996d72d..6da9854751cd 100644 --- a/arch/ia64/sn/kernel/sn2/sn_hwperf.c +++ b/arch/ia64/sn/kernel/sn2/sn_hwperf.c @@ -865,7 +865,7 @@ error: return r; } -static struct file_operations sn_hwperf_fops = { +static const struct file_operations sn_hwperf_fops = { .ioctl = sn_hwperf_ioctl, }; diff --git a/arch/m68k/bvme6000/rtc.c b/arch/m68k/bvme6000/rtc.c index 15c16b62dff5..a812d03879f8 100644 --- a/arch/m68k/bvme6000/rtc.c +++ b/arch/m68k/bvme6000/rtc.c @@ -159,7 +159,7 @@ static int rtc_release(struct inode *inode, struct file *file) * The various file operations we support. */ -static struct file_operations rtc_fops = { +static const struct file_operations rtc_fops = { .ioctl = rtc_ioctl, .open = rtc_open, .release = rtc_release, diff --git a/arch/m68k/mvme16x/rtc.c b/arch/m68k/mvme16x/rtc.c index b0e4c084df8a..272d47eac58d 100644 --- a/arch/m68k/mvme16x/rtc.c +++ b/arch/m68k/mvme16x/rtc.c @@ -147,7 +147,7 @@ static int rtc_release(struct inode *inode, struct file *file) * The various file operations we support. */ -static struct file_operations rtc_fops = { +static const struct file_operations rtc_fops = { .ioctl = rtc_ioctl, .open = rtc_open, .release = rtc_release, diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c index f29e93c6ccfc..d92c48e0d7a6 100644 --- a/arch/mips/kernel/rtlx.c +++ b/arch/mips/kernel/rtlx.c @@ -478,7 +478,7 @@ static ssize_t file_write(struct file *file, const char __user * buffer, return rtlx_write(minor, (void *)buffer, count, 1); } -static struct file_operations rtlx_fops = { +static const struct file_operations rtlx_fops = { .owner = THIS_MODULE, .open = file_open, .release = file_release, diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c index 4e832da48c69..9aca871a307f 100644 --- a/arch/mips/kernel/vpe.c +++ b/arch/mips/kernel/vpe.c @@ -1208,7 +1208,7 @@ static ssize_t vpe_write(struct file *file, const char __user * buffer, return ret; } -static struct file_operations vpe_fops = { +static const struct file_operations vpe_fops = { .owner = THIS_MODULE, .open = vpe_open, .release = vpe_release, diff --git a/arch/mips/sibyte/sb1250/bcm1250_tbprof.c b/arch/mips/sibyte/sb1250/bcm1250_tbprof.c index d1a906e683b2..212547c57310 100644 --- a/arch/mips/sibyte/sb1250/bcm1250_tbprof.c +++ b/arch/mips/sibyte/sb1250/bcm1250_tbprof.c @@ -374,7 +374,7 @@ static long sbprof_tb_ioctl(struct file *filp, return error; } -static struct file_operations sbprof_tb_fops = { +static const struct file_operations sbprof_tb_fops = { .owner = THIS_MODULE, .open = sbprof_tb_open, .release = sbprof_tb_release, diff --git a/arch/parisc/kernel/perf.c b/arch/parisc/kernel/perf.c index ac8ee205c351..a46bc62b643e 100644 --- a/arch/parisc/kernel/perf.c +++ b/arch/parisc/kernel/perf.c @@ -479,7 +479,7 @@ static long perf_ioctl(struct file *file, unsigned int cmd, unsigned long arg) return error; } -static struct file_operations perf_fops = { +static const struct file_operations perf_fops = { .llseek = no_llseek, .read = perf_read, .write = perf_write, diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c index 0de5a08cf9b0..89486b631284 100644 --- a/arch/powerpc/kernel/lparcfg.c +++ b/arch/powerpc/kernel/lparcfg.c @@ -571,7 +571,7 @@ static int lparcfg_open(struct inode *inode, struct file *file) return single_open(file, lparcfg_data, NULL); } -struct file_operations lparcfg_fops = { +const struct file_operations lparcfg_fops = { .owner = THIS_MODULE, .read = seq_read, .write = lparcfg_write, diff --git a/arch/powerpc/kernel/nvram_64.c b/arch/powerpc/kernel/nvram_64.c index 869cebbba967..f9676f52c6d8 100644 --- a/arch/powerpc/kernel/nvram_64.c +++ b/arch/powerpc/kernel/nvram_64.c @@ -179,7 +179,7 @@ static int dev_nvram_ioctl(struct inode *inode, struct file *file, } } -struct file_operations nvram_fops = { +const struct file_operations nvram_fops = { .owner = THIS_MODULE, .llseek = dev_nvram_llseek, .read = dev_nvram_read, diff --git a/arch/powerpc/kernel/proc_ppc64.c b/arch/powerpc/kernel/proc_ppc64.c index 3d437c32546e..f78dfce1b771 100644 --- a/arch/powerpc/kernel/proc_ppc64.c +++ b/arch/powerpc/kernel/proc_ppc64.c @@ -33,7 +33,7 @@ static ssize_t page_map_read( struct file *file, char __user *buf, size_t nbytes loff_t *ppos); static int page_map_mmap( struct file *file, struct vm_area_struct *vma ); -static struct file_operations page_map_fops = { +static const struct file_operations page_map_fops = { .llseek = page_map_seek, .read = page_map_read, .mmap = page_map_mmap diff --git a/arch/powerpc/kernel/rtas-proc.c b/arch/powerpc/kernel/rtas-proc.c index 2fe82abf1c52..6cbf2ae5d7aa 100644 --- a/arch/powerpc/kernel/rtas-proc.c +++ b/arch/powerpc/kernel/rtas-proc.c @@ -160,7 +160,7 @@ static int sensors_open(struct inode *inode, struct file *file) return single_open(file, ppc_rtas_sensors_show, NULL); } -struct file_operations ppc_rtas_sensors_operations = { +const struct file_operations ppc_rtas_sensors_operations = { .open = sensors_open, .read = seq_read, .llseek = seq_lseek, @@ -172,7 +172,7 @@ static int poweron_open(struct inode *inode, struct file *file) return single_open(file, ppc_rtas_poweron_show, NULL); } -struct file_operations ppc_rtas_poweron_operations = { +const struct file_operations ppc_rtas_poweron_operations = { .open = poweron_open, .read = seq_read, .llseek = seq_lseek, @@ -185,7 +185,7 @@ static int progress_open(struct inode *inode, struct file *file) return single_open(file, ppc_rtas_progress_show, NULL); } -struct file_operations ppc_rtas_progress_operations = { +const struct file_operations ppc_rtas_progress_operations = { .open = progress_open, .read = seq_read, .llseek = seq_lseek, @@ -198,7 +198,7 @@ static int clock_open(struct inode *inode, struct file *file) return single_open(file, ppc_rtas_clock_show, NULL); } -struct file_operations ppc_rtas_clock_operations = { +const struct file_operations ppc_rtas_clock_operations = { .open = clock_open, .read = seq_read, .llseek = seq_lseek, @@ -211,7 +211,7 @@ static int tone_freq_open(struct inode *inode, struct file *file) return single_open(file, ppc_rtas_tone_freq_show, NULL); } -struct file_operations ppc_rtas_tone_freq_operations = { +const struct file_operations ppc_rtas_tone_freq_operations = { .open = tone_freq_open, .read = seq_read, .llseek = seq_lseek, @@ -224,7 +224,7 @@ static int tone_volume_open(struct inode *inode, struct file *file) return single_open(file, ppc_rtas_tone_volume_show, NULL); } -struct file_operations ppc_rtas_tone_volume_operations = { +const struct file_operations ppc_rtas_tone_volume_operations = { .open = tone_volume_open, .read = seq_read, .llseek = seq_lseek, @@ -237,7 +237,7 @@ static int rmo_buf_open(struct inode *inode, struct file *file) return single_open(file, ppc_rtas_rmo_buf_show, NULL); } -struct file_operations ppc_rtas_rmo_buf_ops = { +const struct file_operations ppc_rtas_rmo_buf_ops = { .open = rmo_buf_open, .read = seq_read, .llseek = seq_lseek, diff --git a/arch/powerpc/kernel/rtas_flash.c b/arch/powerpc/kernel/rtas_flash.c index 65e4ebe8db31..f72118c0844f 100644 --- a/arch/powerpc/kernel/rtas_flash.c +++ b/arch/powerpc/kernel/rtas_flash.c @@ -702,7 +702,7 @@ static int initialize_flash_pde_data(const char *rtas_call_name, } static struct proc_dir_entry *create_flash_pde(const char *filename, - struct file_operations *fops) + const struct file_operations *fops) { struct proc_dir_entry *ent = NULL; @@ -715,21 +715,21 @@ static struct proc_dir_entry *create_flash_pde(const char *filename, return ent; } -static struct file_operations rtas_flash_operations = { +static const struct file_operations rtas_flash_operations = { .read = rtas_flash_read, .write = rtas_flash_write, .open = rtas_excl_open, .release = rtas_flash_release, }; -static struct file_operations manage_flash_operations = { +static const struct file_operations manage_flash_operations = { .read = manage_flash_read, .write = manage_flash_write, .open = rtas_excl_open, .release = rtas_excl_release, }; -static struct file_operations validate_flash_operations = { +static const struct file_operations validate_flash_operations = { .read = validate_flash_read, .write = validate_flash_write, .open = rtas_excl_open, diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c index 347eff56fcbd..af9e9455a706 100644 --- a/arch/powerpc/platforms/cell/spufs/file.c +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -144,7 +144,7 @@ spufs_mem_mmap(struct file *file, struct vm_area_struct *vma) return 0; } -static struct file_operations spufs_mem_fops = { +static const struct file_operations spufs_mem_fops = { .open = spufs_mem_open, .read = spufs_mem_read, .write = spufs_mem_write, @@ -249,7 +249,7 @@ static int spufs_cntl_open(struct inode *inode, struct file *file) spufs_cntl_set, "0x%08lx"); } -static struct file_operations spufs_cntl_fops = { +static const struct file_operations spufs_cntl_fops = { .open = spufs_cntl_open, .release = simple_attr_close, .read = simple_attr_read, @@ -309,7 +309,7 @@ spufs_regs_write(struct file *file, const char __user *buffer, return ret; } -static struct file_operations spufs_regs_fops = { +static const struct file_operations spufs_regs_fops = { .open = spufs_regs_open, .read = spufs_regs_read, .write = spufs_regs_write, @@ -360,7 +360,7 @@ spufs_fpcr_write(struct file *file, const char __user * buffer, return ret; } -static struct file_operations spufs_fpcr_fops = { +static const struct file_operations spufs_fpcr_fops = { .open = spufs_regs_open, .read = spufs_fpcr_read, .write = spufs_fpcr_write, @@ -426,7 +426,7 @@ static ssize_t spufs_mbox_read(struct file *file, char __user *buf, return count; } -static struct file_operations spufs_mbox_fops = { +static const struct file_operations spufs_mbox_fops = { .open = spufs_pipe_open, .read = spufs_mbox_read, }; @@ -452,7 +452,7 @@ static ssize_t spufs_mbox_stat_read(struct file *file, char __user *buf, return 4; } -static struct file_operations spufs_mbox_stat_fops = { +static const struct file_operations spufs_mbox_stat_fops = { .open = spufs_pipe_open, .read = spufs_mbox_stat_read, }; @@ -559,7 +559,7 @@ static unsigned int spufs_ibox_poll(struct file *file, poll_table *wait) return mask; } -static struct file_operations spufs_ibox_fops = { +static const struct file_operations spufs_ibox_fops = { .open = spufs_pipe_open, .read = spufs_ibox_read, .poll = spufs_ibox_poll, @@ -585,7 +585,7 @@ static ssize_t spufs_ibox_stat_read(struct file *file, char __user *buf, return 4; } -static struct file_operations spufs_ibox_stat_fops = { +static const struct file_operations spufs_ibox_stat_fops = { .open = spufs_pipe_open, .read = spufs_ibox_stat_read, }; @@ -692,7 +692,7 @@ static unsigned int spufs_wbox_poll(struct file *file, poll_table *wait) return mask; } -static struct file_operations spufs_wbox_fops = { +static const struct file_operations spufs_wbox_fops = { .open = spufs_pipe_open, .write = spufs_wbox_write, .poll = spufs_wbox_poll, @@ -718,7 +718,7 @@ static ssize_t spufs_wbox_stat_read(struct file *file, char __user *buf, return 4; } -static struct file_operations spufs_wbox_stat_fops = { +static const struct file_operations spufs_wbox_stat_fops = { .open = spufs_pipe_open, .read = spufs_wbox_stat_read, }; @@ -823,7 +823,7 @@ static int spufs_signal1_mmap(struct file *file, struct vm_area_struct *vma) return 0; } -static struct file_operations spufs_signal1_fops = { +static const struct file_operations spufs_signal1_fops = { .open = spufs_signal1_open, .read = spufs_signal1_read, .write = spufs_signal1_write, @@ -934,7 +934,7 @@ static int spufs_signal2_mmap(struct file *file, struct vm_area_struct *vma) #define spufs_signal2_mmap NULL #endif /* !SPUFS_MMAP_4K */ -static struct file_operations spufs_signal2_fops = { +static const struct file_operations spufs_signal2_fops = { .open = spufs_signal2_open, .read = spufs_signal2_read, .write = spufs_signal2_write, @@ -1037,7 +1037,7 @@ static int spufs_mss_open(struct inode *inode, struct file *file) return nonseekable_open(inode, file); } -static struct file_operations spufs_mss_fops = { +static const struct file_operations spufs_mss_fops = { .open = spufs_mss_open, .mmap = spufs_mss_mmap, }; @@ -1076,7 +1076,7 @@ static int spufs_psmap_open(struct inode *inode, struct file *file) return nonseekable_open(inode, file); } -static struct file_operations spufs_psmap_fops = { +static const struct file_operations spufs_psmap_fops = { .open = spufs_psmap_open, .mmap = spufs_psmap_mmap, }; @@ -1393,7 +1393,7 @@ static int spufs_mfc_fasync(int fd, struct file *file, int on) return fasync_helper(fd, file, on, &ctx->mfc_fasync); } -static struct file_operations spufs_mfc_fops = { +static const struct file_operations spufs_mfc_fops = { .open = spufs_mfc_open, .read = spufs_mfc_read, .write = spufs_mfc_write, @@ -1650,7 +1650,7 @@ static ssize_t spufs_mbox_info_read(struct file *file, char __user *buf, return ret; } -static struct file_operations spufs_mbox_info_fops = { +static const struct file_operations spufs_mbox_info_fops = { .open = spufs_info_open, .read = spufs_mbox_info_read, .llseek = generic_file_llseek, @@ -1688,7 +1688,7 @@ static ssize_t spufs_ibox_info_read(struct file *file, char __user *buf, return ret; } -static struct file_operations spufs_ibox_info_fops = { +static const struct file_operations spufs_ibox_info_fops = { .open = spufs_info_open, .read = spufs_ibox_info_read, .llseek = generic_file_llseek, @@ -1729,7 +1729,7 @@ static ssize_t spufs_wbox_info_read(struct file *file, char __user *buf, return ret; } -static struct file_operations spufs_wbox_info_fops = { +static const struct file_operations spufs_wbox_info_fops = { .open = spufs_info_open, .read = spufs_wbox_info_read, .llseek = generic_file_llseek, @@ -1779,7 +1779,7 @@ static ssize_t spufs_dma_info_read(struct file *file, char __user *buf, return ret; } -static struct file_operations spufs_dma_info_fops = { +static const struct file_operations spufs_dma_info_fops = { .open = spufs_info_open, .read = spufs_dma_info_read, }; @@ -1830,7 +1830,7 @@ static ssize_t spufs_proxydma_info_read(struct file *file, char __user *buf, return ret; } -static struct file_operations spufs_proxydma_info_fops = { +static const struct file_operations spufs_proxydma_info_fops = { .open = spufs_info_open, .read = spufs_proxydma_info_read, }; diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c index 738b9244382f..bffc934ceadb 100644 --- a/arch/powerpc/platforms/cell/spufs/inode.c +++ b/arch/powerpc/platforms/cell/spufs/inode.c @@ -224,7 +224,7 @@ struct inode_operations spufs_dir_inode_operations = { .lookup = simple_lookup, }; -struct file_operations spufs_context_fops = { +const struct file_operations spufs_context_fops = { .open = dcache_dir_open, .release = spufs_dir_close, .llseek = dcache_dir_lseek, @@ -372,7 +372,7 @@ static int spufs_gang_close(struct inode *inode, struct file *file) return dcache_dir_close(inode, file); } -struct file_operations spufs_gang_fops = { +const struct file_operations spufs_gang_fops = { .open = dcache_dir_open, .release = spufs_gang_close, .llseek = dcache_dir_lseek, diff --git a/arch/powerpc/platforms/iseries/lpevents.c b/arch/powerpc/platforms/iseries/lpevents.c index c1f4502a3c6a..91df52a1899a 100644 --- a/arch/powerpc/platforms/iseries/lpevents.c +++ b/arch/powerpc/platforms/iseries/lpevents.c @@ -308,7 +308,7 @@ static int proc_lpevents_open(struct inode *inode, struct file *file) return single_open(file, proc_lpevents_show, NULL); } -static struct file_operations proc_lpevents_operations = { +static const struct file_operations proc_lpevents_operations = { .open = proc_lpevents_open, .read = seq_read, .llseek = seq_lseek, diff --git a/arch/powerpc/platforms/iseries/mf.c b/arch/powerpc/platforms/iseries/mf.c index 90d3d49f713e..b1187d95e3b2 100644 --- a/arch/powerpc/platforms/iseries/mf.c +++ b/arch/powerpc/platforms/iseries/mf.c @@ -1224,7 +1224,7 @@ out: return rc; } -static struct file_operations proc_vmlinux_operations = { +static const struct file_operations proc_vmlinux_operations = { .write = proc_mf_change_vmlinux, }; diff --git a/arch/powerpc/platforms/iseries/proc.c b/arch/powerpc/platforms/iseries/proc.c index b54e37101e69..f2cde4180204 100644 --- a/arch/powerpc/platforms/iseries/proc.c +++ b/arch/powerpc/platforms/iseries/proc.c @@ -101,7 +101,7 @@ static int proc_titantod_open(struct inode *inode, struct file *file) return single_open(file, proc_titantod_show, NULL); } -static struct file_operations proc_titantod_operations = { +static const struct file_operations proc_titantod_operations = { .open = proc_titantod_open, .read = seq_read, .llseek = seq_lseek, diff --git a/arch/powerpc/platforms/iseries/viopath.c b/arch/powerpc/platforms/iseries/viopath.c index a6799ed34a66..e2100ece9c65 100644 --- a/arch/powerpc/platforms/iseries/viopath.c +++ b/arch/powerpc/platforms/iseries/viopath.c @@ -173,7 +173,7 @@ static int proc_viopath_open(struct inode *inode, struct file *file) return single_open(file, proc_viopath_show, NULL); } -static struct file_operations proc_viopath_operations = { +static const struct file_operations proc_viopath_operations = { .open = proc_viopath_open, .read = seq_read, .llseek = seq_lseek, diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c index 9437f48cc9e7..6cedbc002e0f 100644 --- a/arch/powerpc/platforms/pseries/eeh.c +++ b/arch/powerpc/platforms/pseries/eeh.c @@ -1078,7 +1078,7 @@ static int proc_eeh_open(struct inode *inode, struct file *file) return single_open(file, proc_eeh_show, NULL); } -static struct file_operations proc_eeh_operations = { +static const struct file_operations proc_eeh_operations = { .open = proc_eeh_open, .read = seq_read, .llseek = seq_lseek, diff --git a/arch/powerpc/platforms/pseries/hvCall_inst.c b/arch/powerpc/platforms/pseries/hvCall_inst.c index 3ddc04925d50..eae51ef9af24 100644 --- a/arch/powerpc/platforms/pseries/hvCall_inst.c +++ b/arch/powerpc/platforms/pseries/hvCall_inst.c @@ -90,7 +90,7 @@ static int hcall_inst_seq_open(struct inode *inode, struct file *file) return rc; } -static struct file_operations hcall_inst_seq_fops = { +static const struct file_operations hcall_inst_seq_fops = { .open = hcall_inst_seq_open, .read = seq_read, .llseek = seq_lseek, diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c index 789a5e99aefd..5aa97aff3391 100644 --- a/arch/powerpc/platforms/pseries/reconfig.c +++ b/arch/powerpc/platforms/pseries/reconfig.c @@ -499,7 +499,7 @@ out: return rv ? rv : count; } -static struct file_operations ofdt_fops = { +static const struct file_operations ofdt_fops = { .write = ofdt_write }; diff --git a/arch/powerpc/platforms/pseries/rtasd.c b/arch/powerpc/platforms/pseries/rtasd.c index 8ca2612221d6..77d0937d5c07 100644 --- a/arch/powerpc/platforms/pseries/rtasd.c +++ b/arch/powerpc/platforms/pseries/rtasd.c @@ -331,7 +331,7 @@ static unsigned int rtas_log_poll(struct file *file, poll_table * wait) return 0; } -struct file_operations proc_rtas_log_operations = { +const struct file_operations proc_rtas_log_operations = { .read = rtas_log_read, .poll = rtas_log_poll, .open = rtas_log_open, diff --git a/arch/powerpc/platforms/pseries/scanlog.c b/arch/powerpc/platforms/pseries/scanlog.c index 45368a57d7dd..8e1ef168e2dd 100644 --- a/arch/powerpc/platforms/pseries/scanlog.c +++ b/arch/powerpc/platforms/pseries/scanlog.c @@ -184,7 +184,7 @@ static int scanlog_release(struct inode * inode, struct file * file) return 0; } -struct file_operations scanlog_fops = { +const struct file_operations scanlog_fops = { .owner = THIS_MODULE, .read = scanlog_read, .write = scanlog_write, diff --git a/arch/ppc/8xx_io/cs4218_tdm.c b/arch/ppc/8xx_io/cs4218_tdm.c index 684ed04eb8b8..a956f28ab162 100644 --- a/arch/ppc/8xx_io/cs4218_tdm.c +++ b/arch/ppc/8xx_io/cs4218_tdm.c @@ -1711,7 +1711,7 @@ static int mixer_ioctl(struct inode *inode, struct file *file, u_int cmd, } -static struct file_operations mixer_fops = +static const struct file_operations mixer_fops = { .owner = THIS_MODULE, .llseek = sound_lseek, @@ -2298,7 +2298,7 @@ static int sq_ioctl(struct inode *inode, struct file *file, u_int cmd, -static struct file_operations sq_fops = +static const struct file_operations sq_fops = { .owner = THIS_MODULE, .llseek = sound_lseek, @@ -2433,7 +2433,7 @@ static ssize_t state_read(struct file *file, char *buf, size_t count, } -static struct file_operations state_fops = +static const struct file_operations state_fops = { .owner = THIS_MODULE, .llseek = sound_lseek, diff --git a/arch/s390/hypfs/inode.c b/arch/s390/hypfs/inode.c index a4fda7b53640..ba5d3167df0d 100644 --- a/arch/s390/hypfs/inode.c +++ b/arch/s390/hypfs/inode.c @@ -34,7 +34,7 @@ struct hypfs_sb_info { struct mutex lock; /* lock to protect update process */ }; -static struct file_operations hypfs_file_ops; +static const struct file_operations hypfs_file_ops; static struct file_system_type hypfs_type; static struct super_operations hypfs_s_ops; @@ -440,7 +440,7 @@ struct dentry *hypfs_create_str(struct super_block *sb, struct dentry *dir, return dentry; } -static struct file_operations hypfs_file_ops = { +static const struct file_operations hypfs_file_ops = { .open = hypfs_open, .release = hypfs_release, .read = do_sync_read, diff --git a/arch/s390/kernel/debug.c b/arch/s390/kernel/debug.c index f4b62df02aa2..51653d82d7df 100644 --- a/arch/s390/kernel/debug.c +++ b/arch/s390/kernel/debug.c @@ -167,7 +167,7 @@ static DECLARE_MUTEX(debug_lock); static int initialized; -static struct file_operations debug_file_ops = { +static const struct file_operations debug_file_ops = { .owner = THIS_MODULE, .read = debug_output, .write = debug_input, diff --git a/arch/sh/boards/landisk/landisk_pwb.c b/arch/sh/boards/landisk/landisk_pwb.c index e62524978160..47a63c6617ed 100644 --- a/arch/sh/boards/landisk/landisk_pwb.c +++ b/arch/sh/boards/landisk/landisk_pwb.c @@ -150,7 +150,7 @@ static irqreturn_t sw_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } -static struct file_operations swdrv_fops = { +static const struct file_operations swdrv_fops = { .read = swdrv_read, /* read */ .write = swdrv_write, /* write */ .open = swdrv_open, /* open */ diff --git a/arch/sh/mm/cache-debugfs.c b/arch/sh/mm/cache-debugfs.c index e0122bd33ddb..909dcfa8c8c6 100644 --- a/arch/sh/mm/cache-debugfs.c +++ b/arch/sh/mm/cache-debugfs.c @@ -114,7 +114,7 @@ static int cache_debugfs_open(struct inode *inode, struct file *file) return single_open(file, cache_seq_show, inode->i_private); } -static struct file_operations cache_debugfs_fops = { +static const struct file_operations cache_debugfs_fops = { .owner = THIS_MODULE, .open = cache_debugfs_open, .read = seq_read, diff --git a/arch/sh/mm/pmb.c b/arch/sh/mm/pmb.c index b60ad83a7635..d0d45e2e0ab3 100644 --- a/arch/sh/mm/pmb.c +++ b/arch/sh/mm/pmb.c @@ -378,7 +378,7 @@ static int pmb_debugfs_open(struct inode *inode, struct file *file) return single_open(file, pmb_seq_show, NULL); } -static struct file_operations pmb_debugfs_fops = { +static const struct file_operations pmb_debugfs_fops = { .owner = THIS_MODULE, .open = pmb_debugfs_open, .read = seq_read, diff --git a/arch/sh/oprofile/op_model_sh7750.c b/arch/sh/oprofile/op_model_sh7750.c index 60402eec4b4d..0104e44bc76a 100644 --- a/arch/sh/oprofile/op_model_sh7750.c +++ b/arch/sh/oprofile/op_model_sh7750.c @@ -187,7 +187,7 @@ static ssize_t sh7750_write_count(struct file *file, const char __user *buf, return count; } -static struct file_operations count_fops = { +static const struct file_operations count_fops = { .read = sh7750_read_count, .write = sh7750_write_count, }; diff --git a/arch/sparc/kernel/apc.c b/arch/sparc/kernel/apc.c index 406dd94afb45..d06a405ca718 100644 --- a/arch/sparc/kernel/apc.c +++ b/arch/sparc/kernel/apc.c @@ -127,7 +127,7 @@ static int apc_ioctl(struct inode *inode, struct file *f, return 0; } -static struct file_operations apc_fops = { +static const struct file_operations apc_fops = { .ioctl = apc_ioctl, .open = apc_open, .release = apc_release, diff --git a/arch/sparc64/kernel/time.c b/arch/sparc64/kernel/time.c index 061e1b1fa583..f84da4f1b706 100644 --- a/arch/sparc64/kernel/time.c +++ b/arch/sparc64/kernel/time.c @@ -1327,7 +1327,7 @@ static int mini_rtc_release(struct inode *inode, struct file *file) } -static struct file_operations mini_rtc_fops = { +static const struct file_operations mini_rtc_fops = { .owner = THIS_MODULE, .ioctl = mini_rtc_ioctl, .open = mini_rtc_open, diff --git a/arch/sparc64/solaris/socksys.c b/arch/sparc64/solaris/socksys.c index 89a4757f192f..c2864447de82 100644 --- a/arch/sparc64/solaris/socksys.c +++ b/arch/sparc64/solaris/socksys.c @@ -163,7 +163,7 @@ static unsigned int socksys_poll(struct file * filp, poll_table * wait) return mask; } -static struct file_operations socksys_fops = { +static const struct file_operations socksys_fops = { .open = socksys_open, .release = socksys_release, }; diff --git a/arch/um/drivers/harddog_kern.c b/arch/um/drivers/harddog_kern.c index 73c5caa7a150..55601687b3bc 100644 --- a/arch/um/drivers/harddog_kern.c +++ b/arch/um/drivers/harddog_kern.c @@ -145,7 +145,7 @@ static int harddog_ioctl(struct inode *inode, struct file *file, } } -static struct file_operations harddog_fops = { +static const struct file_operations harddog_fops = { .owner = THIS_MODULE, .write = harddog_write, .ioctl = harddog_ioctl, diff --git a/arch/v850/kernel/rte_cb_leds.c b/arch/v850/kernel/rte_cb_leds.c index 996bd4f33ecb..aa47ab1dcd87 100644 --- a/arch/v850/kernel/rte_cb_leds.c +++ b/arch/v850/kernel/rte_cb_leds.c @@ -117,7 +117,7 @@ static loff_t leds_dev_lseek (struct file *file, loff_t offs, int whence) return 0; } -static struct file_operations leds_fops = { +static const struct file_operations leds_fops = { .read = leds_dev_read, .write = leds_dev_write, .llseek = leds_dev_lseek diff --git a/arch/x86_64/kernel/mce.c b/arch/x86_64/kernel/mce.c index ac085038af29..bdb54a2c9f18 100644 --- a/arch/x86_64/kernel/mce.c +++ b/arch/x86_64/kernel/mce.c @@ -516,7 +516,7 @@ static int mce_ioctl(struct inode *i, struct file *f,unsigned int cmd, unsigned } } -static struct file_operations mce_chrdev_ops = { +static const struct file_operations mce_chrdev_ops = { .read = mce_read, .ioctl = mce_ioctl, }; -- cgit v1.2.3 From 9c2e08c592cd357a8330c34def1e8ecfdcf53275 Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Mon, 12 Feb 2007 00:55:37 -0800 Subject: [PATCH] mark struct file_operations const 9 Many struct file_operations in the kernel can be "const". Marking them const moves these to the .rodata section, which avoids false sharing with potential dirty data. In addition it'll catch accidental writes at compile time to these shared resources. Signed-off-by: Arjan van de Ven Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/powerpc/platforms/cell/spufs/spufs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h index 70fb13395c04..56864469215e 100644 --- a/arch/powerpc/platforms/cell/spufs/spufs.h +++ b/arch/powerpc/platforms/cell/spufs/spufs.h @@ -149,7 +149,7 @@ long spufs_run_spu(struct file *file, struct spu_context *ctx, u32 *npc, u32 *status); long spufs_create(struct nameidata *nd, unsigned int flags, mode_t mode); -extern struct file_operations spufs_context_fops; +extern const struct file_operations spufs_context_fops; /* gang management */ struct spu_gang *alloc_spu_gang(void); -- cgit v1.2.3 From 754661f143e70d66eae6c48532ca245aa05dec0e Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Mon, 12 Feb 2007 00:55:38 -0800 Subject: [PATCH] mark struct inode_operations const 1 Many struct inode_operations in the kernel can be "const". Marking them const moves these to the .rodata section, which avoids false sharing with potential dirty data. In addition it'll catch accidental writes at compile time to these shared resources. Signed-off-by: Arjan van de Ven Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/powerpc/platforms/cell/spufs/inode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c index bffc934ceadb..8079983ef94f 100644 --- a/arch/powerpc/platforms/cell/spufs/inode.c +++ b/arch/powerpc/platforms/cell/spufs/inode.c @@ -220,7 +220,7 @@ static int spufs_dir_close(struct inode *inode, struct file *file) return dcache_dir_close(inode, file); } -struct inode_operations spufs_dir_inode_operations = { +const struct inode_operations spufs_dir_inode_operations = { .lookup = simple_lookup, }; -- cgit v1.2.3 From 1b51d3a08b6c80a1e47d4c579c41abbe56cd3c44 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 12 Feb 2007 00:13:31 -0800 Subject: [SPARC64]: We do not need ZONE_DMA. Signed-off-by: David S. Miller --- arch/sparc64/Kconfig | 8 -------- arch/sparc64/defconfig | 13 ++++++++----- arch/sparc64/mm/init.c | 4 ++-- 3 files changed, 10 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig index fb84647dbf3d..f75a686ba644 100644 --- a/arch/sparc64/Kconfig +++ b/arch/sparc64/Kconfig @@ -232,14 +232,6 @@ config LARGE_ALLOCS source "mm/Kconfig" -config ZONE_DMA - bool - default y - -config GENERIC_ISA_DMA - bool - default y - config ISA bool help diff --git a/arch/sparc64/defconfig b/arch/sparc64/defconfig index 069ee3ccd849..0f44a6a6675f 100644 --- a/arch/sparc64/defconfig +++ b/arch/sparc64/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.20 -# Sat Feb 10 23:08:12 2007 +# Sun Feb 11 23:47:40 2007 # CONFIG_SPARC=y CONFIG_SPARC64=y @@ -49,7 +49,6 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_IKCONFIG is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_RELAY=y -CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set @@ -144,7 +143,7 @@ CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_EXTREME=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y -CONFIG_GENERIC_ISA_DMA=y +CONFIG_ZONE_DMA_FLAG=0 CONFIG_SBUS=y CONFIG_SBUSCHAR=y CONFIG_SUN_AUXIO=y @@ -1259,6 +1258,10 @@ CONFIG_USB_HIDDEV=y # DMA Devices # +# +# Auxiliary Display support +# + # # Virtualization # @@ -1450,7 +1453,6 @@ CONFIG_SCHEDSTATS=y # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_RWSEMS is not set # CONFIG_DEBUG_LOCK_ALLOC is not set # CONFIG_PROVE_LOCKING is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set @@ -1533,4 +1535,5 @@ CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_PLIST=y -CONFIG_IOMAP_COPY=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index 09d434f41e4b..b1a1ee0cc6bd 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -1467,8 +1467,8 @@ void __init paging_init(void) for (znum = 0; znum < MAX_NR_ZONES; znum++) zones_size[znum] = zholes_size[znum] = 0; - zones_size[ZONE_DMA] = end_pfn; - zholes_size[ZONE_DMA] = end_pfn - pages_avail; + zones_size[ZONE_NORMAL] = end_pfn; + zholes_size[ZONE_NORMAL] = end_pfn - pages_avail; free_area_init_node(0, &contig_page_data, zones_size, __pa(PAGE_OFFSET) >> PAGE_SHIFT, -- cgit v1.2.3 From 34cc560e6a72ff414ff7d107426a411b0a093ad3 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 12 Feb 2007 15:10:56 -0800 Subject: [SPARC]: Re-export saved_command_line to modules. This reverts some bogosity from the dynamic command-line changes made on sparc32 and sparc64. Drivers such as drivers/sbus/char/openprom.c reference saved_command_line, and can be modular. The boot_command_line is __initdata, yet the dynamic command-line changes add modular exports of that symbol, obviously wrong. Signed-off-by: David S. Miller --- arch/sparc/kernel/sparc_ksyms.c | 2 +- arch/sparc64/kernel/sparc64_ksyms.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sparc/kernel/sparc_ksyms.c b/arch/sparc/kernel/sparc_ksyms.c index bba1b0e02f94..d8e008a04e2b 100644 --- a/arch/sparc/kernel/sparc_ksyms.c +++ b/arch/sparc/kernel/sparc_ksyms.c @@ -229,7 +229,7 @@ EXPORT_SYMBOL(prom_getproplen); EXPORT_SYMBOL(prom_getproperty); EXPORT_SYMBOL(prom_node_has_property); EXPORT_SYMBOL(prom_setprop); -EXPORT_SYMBOL(boot_command_line); +EXPORT_SYMBOL(saved_command_line); EXPORT_SYMBOL(prom_apply_obio_ranges); EXPORT_SYMBOL(prom_feval); EXPORT_SYMBOL(prom_getbool); diff --git a/arch/sparc64/kernel/sparc64_ksyms.c b/arch/sparc64/kernel/sparc64_ksyms.c index f7d78e05e7fc..beffc82a1e85 100644 --- a/arch/sparc64/kernel/sparc64_ksyms.c +++ b/arch/sparc64/kernel/sparc64_ksyms.c @@ -253,7 +253,7 @@ EXPORT_SYMBOL(prom_getproplen); EXPORT_SYMBOL(prom_getproperty); EXPORT_SYMBOL(prom_node_has_property); EXPORT_SYMBOL(prom_setprop); -EXPORT_SYMBOL(boot_command_line); +EXPORT_SYMBOL(saved_command_line); EXPORT_SYMBOL(prom_finddevice); EXPORT_SYMBOL(prom_feval); EXPORT_SYMBOL(prom_getbool); -- cgit v1.2.3 From f413d0d9fa7abcecc40e115cf4aead372d164a75 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 13 Dec 2006 17:40:05 +0900 Subject: sh: Use a jump call table for debug trap handlers. This rips out most of the needlessly complicated sh_bios and kgdb trap handling, and forces it all through a common fast dispatch path. As more debug traps are inserted, it's important to keep them in sync for all of the parts, not just SH-3/4. As the SH-2 parts are unable to do traps in the >= 0x40 range, we restrict the debug traps to the 0x30-0x3f range on all parts, and also bump the kgdb breakpoint trap down in to this range (from 0xff to 0x3c) so it's possible to use for nommu. Optionally, this table can be padded out to catch spurious traps for SH-3/4, but we don't do that yet.. Signed-off-by: Paul Mundt --- arch/sh/kernel/Makefile | 3 +- arch/sh/kernel/cpu/sh2/entry.S | 2 +- arch/sh/kernel/cpu/sh3/entry.S | 2 +- arch/sh/kernel/debugtraps.S | 41 ++++++++++++++ arch/sh/kernel/entry-common.S | 119 +++++++++++++++-------------------------- arch/sh/kernel/kgdb_stub.c | 7 +-- arch/sh/kernel/process.c | 24 +++++++-- 7 files changed, 113 insertions(+), 85 deletions(-) create mode 100644 arch/sh/kernel/debugtraps.S (limited to 'arch') diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile index 2f6d2bcb1c93..ff30d7f58043 100644 --- a/arch/sh/kernel/Makefile +++ b/arch/sh/kernel/Makefile @@ -6,7 +6,8 @@ extra-y := head.o init_task.o vmlinux.lds obj-y := process.o signal.o traps.o irq.o \ ptrace.o setup.o time.o sys_sh.o semaphore.o \ - io.o io_generic.o sh_ksyms.o syscalls.o + io.o io_generic.o sh_ksyms.o syscalls.o \ + debugtraps.o obj-y += cpu/ timers/ obj-$(CONFIG_VSYSCALL) += vsyscall/ diff --git a/arch/sh/kernel/cpu/sh2/entry.S b/arch/sh/kernel/cpu/sh2/entry.S index d51fa5e9904a..8de48102ac85 100644 --- a/arch/sh/kernel/cpu/sh2/entry.S +++ b/arch/sh/kernel/cpu/sh2/entry.S @@ -206,7 +206,7 @@ trap_entry: #if defined(CONFIG_SH_STANDARD_BIOS) /* Unwind the stack and jmp to the debug entry */ -debug_kernel_fw: +ENTRY(sh_bios_handler) mov r15,r0 add #(22-4)*4-4,r0 ldc.l @r0+,gbr diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S index 8c0dc2700c69..014ac37ca16a 100644 --- a/arch/sh/kernel/cpu/sh3/entry.S +++ b/arch/sh/kernel/cpu/sh3/entry.S @@ -173,7 +173,7 @@ call_dae: #if defined(CONFIG_SH_STANDARD_BIOS) /* Unwind the stack and jmp to the debug entry */ -debug_kernel_fw: +ENTRY(sh_bios_handler) mov.l @r15+, r0 mov.l @r15+, r1 mov.l @r15+, r2 diff --git a/arch/sh/kernel/debugtraps.S b/arch/sh/kernel/debugtraps.S new file mode 100644 index 000000000000..13b66746410a --- /dev/null +++ b/arch/sh/kernel/debugtraps.S @@ -0,0 +1,41 @@ +/* + * arch/sh/kernel/debugtraps.S + * + * Debug trap jump tables for SuperH + * + * Copyright (C) 2006 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include + +#if !defined(CONFIG_SH_KGDB) +#define kgdb_handle_exception debug_trap_handler +#endif + +#if !defined(CONFIG_SH_STANDARD_BIOS) +#define sh_bios_handler debug_trap_handler +#endif + + .data + +ENTRY(debug_trap_table) + .long debug_trap_handler /* 0x30 */ + .long debug_trap_handler /* 0x31 */ + .long debug_trap_handler /* 0x32 */ + .long debug_trap_handler /* 0x33 */ + .long debug_trap_handler /* 0x34 */ + .long debug_trap_handler /* 0x35 */ + .long debug_trap_handler /* 0x36 */ + .long debug_trap_handler /* 0x37 */ + .long debug_trap_handler /* 0x38 */ + .long debug_trap_handler /* 0x39 */ + .long debug_trap_handler /* 0x3a */ + .long debug_trap_handler /* 0x3b */ + .long kgdb_handle_exception /* 0x3c */ + .long debug_trap_handler /* 0x3d */ + .long bug_trap_handler /* 0x3e */ + .long sh_bios_handler /* 0x3f */ diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S index fc279aeb73ab..ab4ebb856c2a 100644 --- a/arch/sh/kernel/entry-common.S +++ b/arch/sh/kernel/entry-common.S @@ -54,79 +54,24 @@ # define resume_kernel __restore_all #endif -#if defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB) -! Handle kernel debug if either kgdb (SW) or gdb-stub (FW) is present. -! If both are configured, handle the debug traps (breakpoints) in SW, -! but still allow BIOS traps to FW. - - .align 2 -debug_kernel: -#if defined(CONFIG_SH_STANDARD_BIOS) && defined(CONFIG_SH_KGDB) - /* Force BIOS call to FW (debug_trap put TRA in r8) */ - mov r8,r0 - shlr2 r0 - cmp/eq #0x3f,r0 - bt debug_kernel_fw -#endif /* CONFIG_SH_STANDARD_BIOS && CONFIG_SH_KGDB */ - -debug_enter: -#if defined(CONFIG_SH_KGDB) - /* Jump to kgdb, pass stacked regs as arg */ -debug_kernel_sw: - mov.l 3f, r0 - jmp @r0 - mov r15, r4 - .align 2 -3: .long kgdb_handle_exception -#endif /* CONFIG_SH_KGDB */ -#ifdef CONFIG_SH_STANDARD_BIOS - bra debug_kernel_fw - nop -#endif -#endif /* CONFIG_SH_STANDARD_BIOS || CONFIG_SH_KGDB */ - - .align 2 -debug_trap: -#if defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB) - mov r8, r0 - shlr2 r0 - cmp/eq #0x3f, r0 ! sh_bios() trap - bf 1f -#ifdef CONFIG_SH_KGDB - cmp/eq #0xff, r0 ! XXX: KGDB trap, fix for SH-2. - bf 1f -#endif - mov #OFF_SR, r0 - mov.l @(r0,r15), r0 ! get status register - shll r0 - shll r0 ! kernel space? - bt/s debug_kernel -1: -#endif - mov.l @r15, r0 ! Restore R0 value - mov.l 1f, r8 - jmp @r8 - nop .align 2 ENTRY(exception_error) ! #ifdef CONFIG_TRACE_IRQFLAGS - mov.l 3f, r0 + mov.l 2f, r0 jsr @r0 nop #endif sti - mov.l 2f, r0 + mov.l 1f, r0 jmp @r0 nop -! .align 2 -1: .long break_point_trap_software -2: .long do_exception_error +1: .long do_exception_error #ifdef CONFIG_TRACE_IRQFLAGS -3: .long trace_hardirqs_on +2: .long trace_hardirqs_on #endif .align 2 @@ -330,17 +275,32 @@ __restore_all: .align 2 1: .long restore_all - .align 2 -not_syscall_tra: - bra debug_trap - nop - .align 2 syscall_badsys: ! Bad syscall number mov #-ENOSYS, r0 bra resume_userspace mov.l r0, @(OFF_R0,r15) ! Return value - + +/* + * The main debug trap handler. + * + * r8=TRA (not the trap number!) + * + * Note: This assumes that the trapa value is left in its original + * form (without the shlr2 shift) so the calculation for the jump + * call table offset remains a simple in place mask. + */ +debug_trap: + mov r8, r0 + and #(0xf << 2), r0 + mov.l 1f, r8 + add r0, r8 + mov.l @r8, r8 + jmp @r8 + nop + + .align 2 +1: .long debug_trap_table /* * Syscall interface: @@ -348,17 +308,19 @@ syscall_badsys: ! Bad syscall number * Syscall #: R3 * Arguments #0 to #3: R4--R7 * Arguments #4 to #6: R0, R1, R2 - * TRA: (number of arguments + 0x10) x 4 + * TRA: (number of arguments + ABI revision) x 4 * * This code also handles delegating other traps to the BIOS/gdb stub * according to: * * Trap number - * (TRA>>2) Purpose - * -------- ------- - * 0x0-0xf old syscall ABI - * 0x10-0x1f new syscall ABI - * 0x20-0xff delegated through debug_trap to BIOS/gdb stub. + * (TRA>>2) Purpose + * -------- ------- + * 0x00-0x0f original SH-3/4 syscall ABI (not in general use). + * 0x10-0x1f general SH-3/4 syscall ABI. + * 0x20-0x2f syscall ABI for SH-2 parts. + * 0x30-0x3f debug traps used by the kernel. + * 0x40-0xff Not supported by all parts, so left unhandled. * * Note: When we're first called, the TRA value must be shifted * right 2 bits in order to get the value that was used as the "trapa" @@ -375,17 +337,22 @@ ret_from_fork: nop .align 2 1: .long schedule_tail - ! + +/* + * The poorly named main trapa decode and dispatch routine, for + * system calls and debug traps through their respective jump tables. + */ ENTRY(system_call) #if !defined(CONFIG_CPU_SH2) mov.l 1f, r9 mov.l @r9, r8 ! Read from TRA (Trap Address) Register #endif - ! - ! Is the trap argument >= 0x20? (TRA will be >= 0x80) - mov #0x7f, r9 + /* + * Check the trap type + */ + mov #((0x20 << 2) - 1), r9 cmp/hi r9, r8 - bt/s not_syscall_tra + bt/s debug_trap ! it's a debug trap.. mov #OFF_TRA, r9 add r15, r9 mov.l r8, @r9 ! set TRA value to tra diff --git a/arch/sh/kernel/kgdb_stub.c b/arch/sh/kernel/kgdb_stub.c index 9c6315f0335d..d8927d85492e 100644 --- a/arch/sh/kernel/kgdb_stub.c +++ b/arch/sh/kernel/kgdb_stub.c @@ -1323,8 +1323,11 @@ static void kgdb_command_loop(const int excep_code, const int trapa_value) } /* There has been an exception, most likely a breakpoint. */ -void kgdb_handle_exception(struct pt_regs *regs) +asmlinkage void kgdb_handle_exception(unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7, + struct pt_regs __regs) { + struct pt_regs *regs = RELOC_HIDE(&__regs, 0); int excep_code, vbr_val; int count; int trapa_value = ctrl_inl(TRA); @@ -1368,8 +1371,6 @@ void kgdb_handle_exception(struct pt_regs *regs) vbr_val = trap_registers.vbr; asm("ldc %0, vbr": :"r"(vbr_val)); - - return; } /* Trigger a breakpoint by function */ diff --git a/arch/sh/kernel/process.c b/arch/sh/kernel/process.c index 486c06e18033..cc8f306fd682 100644 --- a/arch/sh/kernel/process.c +++ b/arch/sh/kernel/process.c @@ -493,9 +493,27 @@ asmlinkage void break_point_trap(void) force_sig(SIGTRAP, current); } -asmlinkage void break_point_trap_software(unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7, - struct pt_regs __regs) +/* + * Generic trap handler. + */ +asmlinkage void debug_trap_handler(unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7, + struct pt_regs __regs) +{ + struct pt_regs *regs = RELOC_HIDE(&__regs, 0); + + /* Rewind */ + regs->pc -= 2; + + force_sig(SIGTRAP, current); +} + +/* + * Special handler for BUG() traps. + */ +asmlinkage void bug_trap_handler(unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7, + struct pt_regs __regs) { struct pt_regs *regs = RELOC_HIDE(&__regs, 0); -- cgit v1.2.3 From 702dd80375046d36f892a0f86c83f8549c623b35 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 19 Dec 2006 12:05:17 +0900 Subject: sh: Use proper SH-2A CFLAGS on newer compilers. -m2 doesn't end up working particularly well when we've got a constrained toolchain target. Switch to the same semantics used by SH-4A to attempt to get it right. Spotted by Alex Song . Signed-off-by: Paul Mundt --- arch/sh/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/sh/Makefile b/arch/sh/Makefile index c1dbef212634..4903c7c665a9 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -35,6 +35,7 @@ endif endif cflags-$(CONFIG_CPU_SH2) := -m2 +cflags-$(CONFIG_CPU_SH2A) := -m2a $(call cc-option,-m2a-nofpu,) cflags-$(CONFIG_CPU_SH3) := -m3 cflags-$(CONFIG_CPU_SH4) := -m4 \ $(call cc-option,-mno-implicit-fp,-m4-nofpu) -- cgit v1.2.3 From 4aa362bbdd801dd971acbe3db479fe871f2fed0b Mon Sep 17 00:00:00 2001 From: Yoshinori Sato Date: Tue, 19 Dec 2006 12:10:48 +0900 Subject: sh: Update SH-2 to use the debug trap jump table. Signed-off-by: Yoshinori Sato Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh2/entry.S | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/sh/kernel/cpu/sh2/entry.S b/arch/sh/kernel/cpu/sh2/entry.S index 8de48102ac85..7f7d292f36ec 100644 --- a/arch/sh/kernel/cpu/sh2/entry.S +++ b/arch/sh/kernel/cpu/sh2/entry.S @@ -178,12 +178,10 @@ interrupt_entry: 8: .long do_exception_error trap_entry: - /* verbose BUG trapa entry check */ - mov #0x3e,r8 - cmp/ge r8,r9 - bf/s 1f - add #-0x10,r9 - add #0x10,r9 + mov #0x30,r8 + cmp/ge r8,r9 ! vector 0x20-0x2f is systemcall + bt 1f + add #-0x10,r9 ! convert SH2 to SH3/4 ABI 1: shll2 r9 ! TRA mov #OFF_TRA,r8 -- cgit v1.2.3 From 5c67cd05e3e9b6f08c3472dd66f0d8d03e1ee870 Mon Sep 17 00:00:00 2001 From: Yoshinori Sato Date: Tue, 19 Dec 2006 12:12:01 +0900 Subject: sh: sh7619 / sh7206 IPR initialize update IPR initialize proceduere update. Signed-off-by: Yoshinori Sato Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh2/setup-sh7619.c | 62 +++++++++++------------ arch/sh/kernel/cpu/sh2a/setup-sh7206.c | 89 ++++++++++++++++------------------ 2 files changed, 72 insertions(+), 79 deletions(-) (limited to 'arch') diff --git a/arch/sh/kernel/cpu/sh2/setup-sh7619.c b/arch/sh/kernel/cpu/sh2/setup-sh7619.c index 79283e6c1d8f..f83ff8a68f35 100644 --- a/arch/sh/kernel/cpu/sh2/setup-sh7619.c +++ b/arch/sh/kernel/cpu/sh2/setup-sh7619.c @@ -52,42 +52,38 @@ static int __init sh7619_devices_setup(void) } __initcall(sh7619_devices_setup); -#define INTC_IPRC 0xf8080000UL -#define INTC_IPRD 0xf8080002UL - -#define CMI0_IRQ 86 - -#define SCIF0_ERI_IRQ 88 -#define SCIF0_RXI_IRQ 89 -#define SCIF0_BRI_IRQ 90 -#define SCIF0_TXI_IRQ 91 - -#define SCIF1_ERI_IRQ 92 -#define SCIF1_RXI_IRQ 93 -#define SCIF1_BRI_IRQ 94 -#define SCIF1_TXI_IRQ 95 - -#define SCIF2_BRI_IRQ 96 -#define SCIF2_ERI_IRQ 97 -#define SCIF2_RXI_IRQ 98 -#define SCIF2_TXI_IRQ 99 - static struct ipr_data sh7619_ipr_map[] = { - { CMI0_IRQ, INTC_IPRC, 1, 2 }, - { SCIF0_ERI_IRQ, INTC_IPRD, 3, 3 }, - { SCIF0_RXI_IRQ, INTC_IPRD, 3, 3 }, - { SCIF0_BRI_IRQ, INTC_IPRD, 3, 3 }, - { SCIF0_TXI_IRQ, INTC_IPRD, 3, 3 }, - { SCIF1_ERI_IRQ, INTC_IPRD, 2, 3 }, - { SCIF1_RXI_IRQ, INTC_IPRD, 2, 3 }, - { SCIF1_BRI_IRQ, INTC_IPRD, 2, 3 }, - { SCIF1_TXI_IRQ, INTC_IPRD, 2, 3 }, - { SCIF2_ERI_IRQ, INTC_IPRD, 1, 3 }, - { SCIF2_RXI_IRQ, INTC_IPRD, 1, 3 }, - { SCIF2_BRI_IRQ, INTC_IPRD, 1, 3 }, - { SCIF2_TXI_IRQ, INTC_IPRD, 1, 3 }, + { 86, 0, 4, 2 }, /* CMI0 */ + { 88, 1, 12, 3 }, /* SCIF0_ERI */ + { 89, 1, 12, 3 }, /* SCIF0_RXI */ + { 90, 1, 12, 3 }, /* SCIF0_BRI */ + { 91, 1, 12, 3 }, /* SCIF0_TXI */ + { 92, 1, 8, 3 }, /* SCIF1_ERI */ + { 93, 1, 8, 3 }, /* SCIF1_RXI */ + { 94, 1, 8, 3 }, /* SCIF1_BRI */ + { 95, 1, 8, 3 }, /* SCIF1_TXI */ + { 96, 1, 4, 3 }, /* SCIF2_ERI */ + { 97, 1, 4, 3 }, /* SCIF2_RXI */ + { 98, 1, 4, 3 }, /* SCIF2_BRI */ + { 99, 1, 4, 3 }, /* SCIF2_TXI */ }; +static unsigned int ipr_offsets[] = { + 0xf8080000, /* IPRC */ + 0xf8080002, /* IPRD */ + 0xf8080004, /* IPRE */ + 0xf8080006, /* IPRF */ + 0xf8080008, /* IPRG */ +}; + +/* given the IPR index return the address of the IPR register */ +unsigned int map_ipridx_to_addr(int idx) +{ + if (unlikely(idx >= ARRAY_SIZE(ipr_offsets))) + return 0; + return ipr_offsets[idx]; +} + void __init init_IRQ_ipr(void) { make_ipr_irq(sh7619_ipr_map, ARRAY_SIZE(sh7619_ipr_map)); diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c index 4b60fcc7d667..4ed9110632bc 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c +++ b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c @@ -57,55 +57,52 @@ static int __init sh7206_devices_setup(void) } __initcall(sh7206_devices_setup); -#define INTC_IPR08 0xfffe0c04UL -#define INTC_IPR09 0xfffe0c06UL -#define INTC_IPR14 0xfffe0c10UL - -#define CMI0_IRQ 140 - -#define MTU1_TGI1A 164 - -#define SCIF0_BRI_IRQ 240 -#define SCIF0_ERI_IRQ 241 -#define SCIF0_RXI_IRQ 242 -#define SCIF0_TXI_IRQ 243 - -#define SCIF1_BRI_IRQ 244 -#define SCIF1_ERI_IRQ 245 -#define SCIF1_RXI_IRQ 246 -#define SCIF1_TXI_IRQ 247 - -#define SCIF2_BRI_IRQ 248 -#define SCIF2_ERI_IRQ 249 -#define SCIF2_RXI_IRQ 250 -#define SCIF2_TXI_IRQ 251 - -#define SCIF3_BRI_IRQ 252 -#define SCIF3_ERI_IRQ 253 -#define SCIF3_RXI_IRQ 254 -#define SCIF3_TXI_IRQ 255 - static struct ipr_data sh7206_ipr_map[] = { - { CMI0_IRQ, INTC_IPR08, 3, 2 }, - { MTU2_TGI1A, INTC_IPR09, 1, 2 }, - { SCIF0_ERI_IRQ, INTC_IPR14, 3, 3 }, - { SCIF0_RXI_IRQ, INTC_IPR14, 3, 3 }, - { SCIF0_BRI_IRQ, INTC_IPR14, 3, 3 }, - { SCIF0_TXI_IRQ, INTC_IPR14, 3, 3 }, - { SCIF1_ERI_IRQ, INTC_IPR14, 2, 3 }, - { SCIF1_RXI_IRQ, INTC_IPR14, 2, 3 }, - { SCIF1_BRI_IRQ, INTC_IPR14, 2, 3 }, - { SCIF1_TXI_IRQ, INTC_IPR14, 2, 3 }, - { SCIF2_ERI_IRQ, INTC_IPR14, 1, 3 }, - { SCIF2_RXI_IRQ, INTC_IPR14, 1, 3 }, - { SCIF2_BRI_IRQ, INTC_IPR14, 1, 3 }, - { SCIF2_TXI_IRQ, INTC_IPR14, 1, 3 }, - { SCIF3_ERI_IRQ, INTC_IPR14, 0, 3 }, - { SCIF3_RXI_IRQ, INTC_IPR14, 0, 3 }, - { SCIF3_BRI_IRQ, INTC_IPR14, 0, 3 }, - { SCIF3_TXI_IRQ, INTC_IPR14, 0, 3 }, + { 140, 7, 12, 2 }, /* CMI0 */ + { 164, 8, 4, 2 }, /* MTU2_TGI1A */ + { 240, 13, 12, 3 }, /* SCIF0_BRI */ + { 241, 13, 12, 3 }, /* SCIF0_ERI */ + { 242, 13, 12, 3 }, /* SCIF0_RXI */ + { 243, 13, 12, 3 }, /* SCIF0_TXI */ + { 244, 13, 8, 3 }, /* SCIF1_BRI */ + { 245, 13, 8, 3 }, /* SCIF1_ERI */ + { 246, 13, 8, 3 }, /* SCIF1_RXI */ + { 247, 13, 8, 3 }, /* SCIF1_TXI */ + { 248, 13, 4, 3 }, /* SCIF2_BRI */ + { 249, 13, 4, 3 }, /* SCIF2_ERI */ + { 250, 13, 4, 3 }, /* SCIF2_RXI */ + { 251, 13, 4, 3 }, /* SCIF2_TXI */ + { 252, 13, 0, 3 }, /* SCIF3_BRI */ + { 253, 13, 0, 3 }, /* SCIF3_ERI */ + { 254, 13, 0, 3 }, /* SCIF3_RXI */ + { 255, 13, 0, 3 }, /* SCIF3_TXI */ +}; + +static unsigned int ipr_offsets[] = { + 0xfffe0818, /* IPR01 */ + 0xfffe081a, /* IPR02 */ + 0, /* unused */ + 0, /* unused */ + 0xfffe0820, /* IPR05 */ + 0xfffe0c00, /* IPR06 */ + 0xfffe0c02, /* IPR07 */ + 0xfffe0c04, /* IPR08 */ + 0xfffe0c06, /* IPR09 */ + 0xfffe0c08, /* IPR10 */ + 0xfffe0c0a, /* IPR11 */ + 0xfffe0c0c, /* IPR12 */ + 0xfffe0c0e, /* IPR13 */ + 0xfffe0c10, /* IPR14 */ }; +/* given the IPR index return the address of the IPR register */ +unsigned int map_ipridx_to_addr(int idx) +{ + if (unlikely(idx >= ARRAY_SIZE(ipr_offsets))) + return 0; + return ipr_offsets[idx]; +} + void __init init_IRQ_ipr(void) { make_ipr_irq(sh7206_ipr_map, ARRAY_SIZE(sh7206_ipr_map)); -- cgit v1.2.3 From 703404ea441fc198d03ca3e9edbac6e09b5415f4 Mon Sep 17 00:00:00 2001 From: Jamie Lenehan Date: Tue, 19 Dec 2006 12:16:06 +0900 Subject: sh: allow earlyprintk baud rate to be set via command line This allows the baud rate for earlyprintk for sh4 without the standard BIOS to be set via the command line. This uses the same format as i386 and x86_64, which is: earlyprintk=serial,ttySC1,38400 The second parameter (ttySC1 above) is usually the console device name or the io address of the serial port. I allow that to be specified but ignore it in order to keep the format the same as i386/x86_64. Signed-off-by: Jamie Lenehan Signed-off-by: Paul Mundt --- arch/sh/kernel/early_printk.c | 24 ++++++++++++++++++++++-- 1 file changed, 22 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sh/kernel/early_printk.c b/arch/sh/kernel/early_printk.c index 560b91cdd15c..9048c0326d87 100644 --- a/arch/sh/kernel/early_printk.c +++ b/arch/sh/kernel/early_printk.c @@ -106,12 +106,32 @@ static struct console scif_console = { }; #if defined(CONFIG_CPU_SH4) && !defined(CONFIG_SH_STANDARD_BIOS) +#define DEFAULT_BAUD 115200 /* * Simple SCIF init, primarily aimed at SH7750 and other similar SH-4 * devices that aren't using sh-ipl+g. */ -static void scif_sercon_init(int baud) +static void scif_sercon_init(char *s) { + unsigned baud = DEFAULT_BAUD; + char *e; + + if (*s == ',') + ++s; + + if (*s) { + /* ignore ioport/device name */ + s += strcspn(s, ","); + if (*s == ',') + s++; + } + + if (*s) { + baud = simple_strtoul(s, &e, 0); + if (baud == 0 || s == e) + baud = DEFAULT_BAUD; + } + ctrl_outw(0, scif_port.mapbase + 8); ctrl_outw(0, scif_port.mapbase); @@ -167,7 +187,7 @@ int __init setup_early_printk(char *buf) early_console = &scif_console; #if defined(CONFIG_CPU_SH4) && !defined(CONFIG_SH_STANDARD_BIOS) - scif_sercon_init(115200); + scif_sercon_init(buf + 6); #endif } #endif -- cgit v1.2.3 From 2c081e71baadccb4543815ef42c5290ac2961546 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 25 Dec 2006 18:28:33 +0900 Subject: sh: Fixup R7780RP iVDR clock enable. The iVDR clock enable bit happens to actually reside in a rather different place than what is documented, so fix it up accordingly. This fixes up SATA boot for some of the R7780RP boards that didn't default-enable the clock in the loader. Signed-off-by: Paul Mundt --- arch/sh/boards/renesas/r7780rp/setup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sh/boards/renesas/r7780rp/setup.c b/arch/sh/boards/renesas/r7780rp/setup.c index 9f89c8de9db9..b48f19f512ca 100644 --- a/arch/sh/boards/renesas/r7780rp/setup.c +++ b/arch/sh/boards/renesas/r7780rp/setup.c @@ -148,7 +148,7 @@ static void __init r7780rp_setup(char **cmdline_p) #ifndef CONFIG_SH_R7780MP ctrl_outw(0x0001, PA_SDPOW); /* SD Power ON */ #endif - ctrl_outw(ctrl_inw(PA_IVDRCTL) | 0x0100, PA_IVDRCTL); /* Si13112 */ + ctrl_outw(ctrl_inw(PA_IVDRCTL) | 0x01, PA_IVDRCTL); /* Si13112 */ pm_power_off = r7780rp_power_off; } -- cgit v1.2.3 From f725b5ee1e392ab1299c9317236cf736af1183ab Mon Sep 17 00:00:00 2001 From: Takashi YOSHII Date: Mon, 25 Dec 2006 18:35:24 +0900 Subject: sh: shmin updates. This fixes up shmin (and SH7706/SH7708) IPR support for some of the recent API changes. Signed-off-by: Takashi YOSHII Signed-off-by: Paul Mundt --- arch/sh/boards/shmin/setup.c | 12 +++++++++++- arch/sh/kernel/cpu/irq/ipr.c | 19 ++++++++++++++++--- arch/sh/kernel/cpu/sh3/setup-sh7709.c | 21 +++++++++++++++++++++ arch/sh/mm/Kconfig | 2 ++ 4 files changed, 50 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/sh/boards/shmin/setup.c b/arch/sh/boards/shmin/setup.c index a31a1d1e2681..bed9ca653d3a 100644 --- a/arch/sh/boards/shmin/setup.c +++ b/arch/sh/boards/shmin/setup.c @@ -12,12 +12,22 @@ #include #include -#define PFC_PHCR 0xa400010e +#define PFC_PHCR 0xa400010eUL +#define INTC_ICR1 0xffd00000UL +#define INTC_IPRC 0xa4000016UL + +static struct ipr_data shmin_ipr_map[] = { + { .irq=32, .addr=INTC_IPRC, .shift= 0, .priority=0 }, + { .irq=33, .addr=INTC_IPRC, .shift= 4, .priority=0 }, + { .irq=34, .addr=INTC_IPRC, .shift= 8, .priority=8 }, + { .irq=35, .addr=INTC_IPRC, .shift=12, .priority=0 }, +}; static void __init init_shmin_irq(void) { ctrl_outw(0x2a00, PFC_PHCR); // IRQ0-3=IRQ ctrl_outw(0x0aaa, INTC_ICR1); // IRQ0-3=IRQ-mode,Low-active. + make_ipr_irq(shmin_ipr_map, ARRAY_SIZE(shmin_ipr_map)); } static void __iomem *shmin_ioport_map(unsigned long port, unsigned int size) diff --git a/arch/sh/kernel/cpu/irq/ipr.c b/arch/sh/kernel/cpu/irq/ipr.c index 35eb5751a3aa..210280b6fddf 100644 --- a/arch/sh/kernel/cpu/irq/ipr.c +++ b/arch/sh/kernel/cpu/irq/ipr.c @@ -43,16 +43,29 @@ static struct irq_chip ipr_irq_chip = { .mask_ack = disable_ipr_irq, }; +unsigned int map_ipridx_to_addr(int idx) __attribute__ ((weak)); +unsigned int map_ipridx_to_addr(int idx) +{ + return 0; +} + void make_ipr_irq(struct ipr_data *table, unsigned int nr_irqs) { int i; for (i = 0; i < nr_irqs; i++) { unsigned int irq = table[i].irq; - table[i].addr = map_ipridx_to_addr(table[i].ipr_idx); + + if (!irq) + irq = table[i].irq = i; + /* could the IPR index be mapped, if not we ignore this */ - if (table[i].addr == 0) - continue; + if (!table[i].addr) { + table[i].addr = map_ipridx_to_addr(table[i].ipr_idx); + if (!table[i].addr) + continue; + } + disable_irq_nosync(irq); set_irq_chip_and_handler_name(irq, &ipr_irq_chip, handle_level_irq, "level"); diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7709.c b/arch/sh/kernel/cpu/sh3/setup-sh7709.c index ff43ef2a1f0c..dc9b211cf87f 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7709.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7709.c @@ -51,3 +51,24 @@ static int __init sh7709_devices_setup(void) ARRAY_SIZE(sh7709_devices)); } __initcall(sh7709_devices_setup); + +#define IPRx(A,N) .addr=A, .shift=0*N*-1 +#define IPRA(N) IPRx(0xfffffee2UL,N) +#define IPRB(N) IPRx(0xfffffee4UL,N) +#define IPRE(N) IPRx(0xa400001aUL,N) + +static struct ipr_data sh7709_ipr_map[] = { + [16] = { IPRA(15-12), 2 }, /* TMU TUNI0 */ + [17] = { IPRA(11-8), 4 }, /* TMU TUNI1 */ + [22] = { IPRA(3-0), 2 }, /* RTC CUI */ + [23 ... 26] = { IPRB(7-4), 3 }, /* SCI */ + [27] = { IPRB(15-12), 2 }, /* WDT ITI */ + [48 ... 51] = { IPRE(15-12), 7 }, /* DMA */ + [52 ... 55] = { IPRE(11-8), 3 }, /* IRDA */ + [56 ... 59] = { IPRE(7-4), 3 }, /* SCIF */ +}; + +void __init init_IRQ_ipr() +{ + make_ipr_irq(sh7709_ipr_map, ARRAY_SIZE(sh7709_ipr_map)); +} diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig index 29f4ee35c6dc..fddf6680ec4f 100644 --- a/arch/sh/mm/Kconfig +++ b/arch/sh/mm/Kconfig @@ -72,6 +72,7 @@ config CPU_SUBTYPE_SH7705 config CPU_SUBTYPE_SH7706 bool "Support SH7706 processor" select CPU_SH3 + select CPU_HAS_IPR_IRQ help Select SH7706 if you have a 133 Mhz SH-3 HD6417706 CPU. @@ -92,6 +93,7 @@ config CPU_SUBTYPE_SH7708 config CPU_SUBTYPE_SH7709 bool "Support SH7709 processor" select CPU_SH3 + select CPU_HAS_IPR_IRQ select CPU_HAS_PINT_IRQ help Select SH7709 if you have a 80 Mhz SH-3 HD6417709 CPU. -- cgit v1.2.3 From 08d2e099fb19ec2edef548a2988c824c8ec0b071 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Fri, 29 Dec 2006 01:44:32 +0900 Subject: sh: Solution Engine 7750's defconfig update. Update se7750_defconfig. Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Paul Mundt --- arch/sh/configs/se7750_defconfig | 140 +++++++++++++++++++++++++++++++++------ 1 file changed, 120 insertions(+), 20 deletions(-) (limited to 'arch') diff --git a/arch/sh/configs/se7750_defconfig b/arch/sh/configs/se7750_defconfig index 5d357d68b234..4e6e77fa4ce7 100644 --- a/arch/sh/configs/se7750_defconfig +++ b/arch/sh/configs/se7750_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18 -# Tue Oct 3 11:49:01 2006 +# Linux kernel version: 2.6.20-rc2 +# Thu Dec 28 23:15:49 2006 # CONFIG_SUPERH=y CONFIG_RWSEM_GENERIC_SPINLOCK=y @@ -10,6 +10,11 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_GENERIC_TIME is not set +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -35,6 +40,7 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -116,6 +122,8 @@ CONFIG_SH_SOLUTION_ENGINE=y # CONFIG_SH_LANDISK is not set # CONFIG_SH_TITAN is not set # CONFIG_SH_SHMIN is not set +# CONFIG_SH_7206_SOLUTION_ENGINE is not set +# CONFIG_SH_7619_SOLUTION_ENGINE is not set # CONFIG_SH_UNKNOWN is not set # @@ -127,6 +135,12 @@ CONFIG_CPU_SH4=y # SH-2 Processor Support # # CONFIG_CPU_SUBTYPE_SH7604 is not set +# CONFIG_CPU_SUBTYPE_SH7619 is not set + +# +# SH-2A Processor Support +# +# CONFIG_CPU_SUBTYPE_SH7206 is not set # # SH-3 Processor Support @@ -162,12 +176,14 @@ CONFIG_CPU_SUBTYPE_SH7750=y # # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set +# CONFIG_CPU_SUBTYPE_SH7785 is not set # # SH4AL-DSP Processor Support # # CONFIG_CPU_SUBTYPE_SH73180 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set # # Memory management options @@ -177,6 +193,9 @@ CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x02000000 CONFIG_VSYSCALL=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_64KB is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -202,17 +221,22 @@ CONFIG_CF_BASE_ADDR=0xb8000000 # Processor features # CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_CPU_BIG_ENDIAN is not set CONFIG_SH_FPU=y # CONFIG_SH_DSP is not set # CONFIG_SH_STORE_QUEUES is not set CONFIG_CPU_HAS_INTEVT=y +CONFIG_CPU_HAS_IPR_IRQ=y CONFIG_CPU_HAS_SR_RB=y +CONFIG_CPU_HAS_PTEA=y # # Timer support # CONFIG_SH_TMU=y -CONFIG_SH_PCLK_FREQ=50000000 +CONFIG_SH_TIMER_IRQ=16 +# CONFIG_NO_IDLE_HZ is not set +CONFIG_SH_PCLK_FREQ=33333333 # # CPU Frequency scaling @@ -230,11 +254,17 @@ CONFIG_SH_PCLK_FREQ=50000000 # CONFIG_HD6446X_SERIES is not set CONFIG_HEARTBEAT=y +# +# Additional SuperH Device Drivers +# +# CONFIG_PUSH_SWITCH is not set + # # Kernel features # # CONFIG_HZ_100 is not set CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 # CONFIG_KEXEC is not set @@ -249,8 +279,7 @@ CONFIG_PREEMPT_NONE=y CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 # CONFIG_UBC_WAKEUP is not set -CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="console=ttySC1,38400 root=/dev/nfs ip=bootp" +# CONFIG_CMDLINE_BOOL is not set # # Bus options @@ -313,11 +342,13 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set @@ -479,17 +510,80 @@ CONFIG_MTD_ROM=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# +# Misc devices +# +# CONFIG_TIFM_CORE is not set + # # ATA/ATAPI/MFM/RLL support # -# CONFIG_IDE is not set +CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +# CONFIG_IDE_GENERIC is not set +# CONFIG_IDE_ARM is not set +# CONFIG_BLK_DEV_IDEDMA is not set +# CONFIG_IDEDMA_AUTO is not set +# CONFIG_BLK_DEV_HD is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set +CONFIG_SCSI=y +# CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +# CONFIG_BLK_DEV_SD is not set +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set # # Serial ATA (prod) and Parallel ATA (experimental) drivers @@ -633,17 +727,12 @@ CONFIG_HW_RANDOM=y # CONFIG_GEN_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_RAW_DRIVER is not set # # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -659,6 +748,7 @@ CONFIG_HW_RANDOM=y # # Dallas's 1-wire bus # +# CONFIG_W1 is not set # # Hardware Monitoring support @@ -667,18 +757,14 @@ CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_HWMON_DEBUG_CHIP is not set -# -# Misc devices -# - # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -757,15 +843,21 @@ CONFIG_FIRMWARE_EDID=y # DMA Devices # +# +# Virtualization +# + # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -814,7 +906,6 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y @@ -874,6 +965,11 @@ CONFIG_PARTITION_ADVANCED=y # # CONFIG_NLS is not set +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + # # Profiling support # @@ -882,14 +978,16 @@ CONFIG_PARTITION_ADVANCED=y # # Kernel hacking # +CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_ENABLE_MUST_CHECK is not set # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_FS is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_KGDB is not set @@ -908,6 +1006,7 @@ CONFIG_LOG_BUF_SHIFT=14 # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC32=y @@ -915,3 +1014,4 @@ CONFIG_CRC32=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_PLIST=y +CONFIG_IOMAP_COPY=y -- cgit v1.2.3 From aa4a5db52a440d32eab134bfb79d2c9af71eedb4 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Fri, 29 Dec 2006 01:50:35 +0900 Subject: sh: Solution Engine 770x IPR irq setup. Fixups for external IPR IRQs for the SE770x FPGA. Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Paul Mundt --- arch/sh/boards/se/770x/irq.c | 108 ++++++++++++++++++++++++++++------------- arch/sh/boards/se/770x/setup.c | 8 +-- 2 files changed, 75 insertions(+), 41 deletions(-) (limited to 'arch') diff --git a/arch/sh/boards/se/770x/irq.c b/arch/sh/boards/se/770x/irq.c index fcd7cd7fa05f..307ca5da6232 100644 --- a/arch/sh/boards/se/770x/irq.c +++ b/arch/sh/boards/se/770x/irq.c @@ -2,56 +2,96 @@ * linux/arch/sh/boards/se/770x/irq.c * * Copyright (C) 2000 Kazumoto Kojima + * Copyright (C) 2006 Nobuhiro Iwamatsu * * Hitachi SolutionEngine Support. * */ #include +#include #include #include #include #include +/* + * If the problem of make_ipr_irq is solved, + * this code will become unnecessary. :-) + */ +static void se770x_disable_ipr_irq(unsigned int irq) +{ + struct ipr_data *p = get_irq_chip_data(irq); + + ctrl_outw(ctrl_inw(p->addr) & (0xffff ^ (0xf << p->shift)), p->addr); +} + +static void se770x_enable_ipr_irq(unsigned int irq) +{ + struct ipr_data *p = get_irq_chip_data(irq); + + ctrl_outw(ctrl_inw(p->addr) | (p->priority << p->shift), p->addr); +} + +static struct irq_chip se770x_irq_chip = { + .name = "MS770xSE-FPGA", + .mask = se770x_disable_ipr_irq, + .unmask = se770x_enable_ipr_irq, + .mask_ack = se770x_disable_ipr_irq, +}; + +void make_se770x_irq(struct ipr_data *table, unsigned int nr_irqs) +{ + int i; + + for (i = 0; i < nr_irqs; i++) { + unsigned int irq = table[i].irq; + disable_irq_nosync(irq); + set_irq_chip_and_handler_name(irq, &se770x_irq_chip, + handle_level_irq, "level"); + set_irq_chip_data(irq, &table[i]); + se770x_enable_ipr_irq(irq); + } +} + static struct ipr_data se770x_ipr_map[] = { #if defined(CONFIG_CPU_SUBTYPE_SH7705) /* This is default value */ - { 0xf-0x2, BCR_ILCRA, 2, 0x2 }, - { 0xf-0xa, BCR_ILCRA, 1, 0xa }, - { 0xf-0x5, BCR_ILCRB, 0, 0x5 }, - { 0xf-0x8, BCR_ILCRC, 1, 0x8 }, - { 0xf-0xc, BCR_ILCRC, 0, 0xc }, - { 0xf-0xe, BCR_ILCRD, 3, 0xe }, - { 0xf-0x3, BCR_ILCRD, 1, 0x3 }, /* LAN */ - { 0xf-0xd, BCR_ILCRE, 2, 0xd }, - { 0xf-0x9, BCR_ILCRE, 1, 0x9 }, - { 0xf-0x1, BCR_ILCRE, 0, 0x1 }, - { 0xf-0xf, BCR_ILCRF, 3, 0xf }, - { 0xf-0xb, BCR_ILCRF, 1, 0xb }, - { 0xf-0x7, BCR_ILCRG, 3, 0x7 }, - { 0xf-0x6, BCR_ILCRG, 2, 0x6 }, - { 0xf-0x4, BCR_ILCRG, 1, 0x4 }, + { 0xf-0x2, 0, 8, 0x2 , BCR_ILCRA}, + { 0xf-0xa, 0, 4, 0xa , BCR_ILCRA}, + { 0xf-0x5, 0, 0, 0x5 , BCR_ILCRB}, + { 0xf-0x8, 0, 4, 0x8 , BCR_ILCRC}, + { 0xf-0xc, 0, 0, 0xc , BCR_ILCRC}, + { 0xf-0xe, 0, 12, 0xe , BCR_ILCRD}, + { 0xf-0x3, 0, 4, 0x3 , BCR_ILCRD}, /* LAN */ + { 0xf-0xd, 0, 8, 0xd , BCR_ILCRE}, + { 0xf-0x9, 0, 4, 0x9 , BCR_ILCRE}, + { 0xf-0x1, 0, 0, 0x1 , BCR_ILCRE}, + { 0xf-0xf, 0, 12, 0xf , BCR_ILCRF}, + { 0xf-0xb, 0, 4, 0xb , BCR_ILCRF}, + { 0xf-0x7, 0, 12, 0x7 , BCR_ILCRG}, + { 0xf-0x6, 0, 8, 0x6 , BCR_ILCRG}, + { 0xf-0x4, 0, 4, 0x4 , BCR_ILCRG}, #else - { 14, BCR_ILCRA, 2, 0x0f-14 }, - { 12, BCR_ILCRA, 1, 0x0f-12 }, - { 8, BCR_ILCRB, 1, 0x0f- 8 }, - { 6, BCR_ILCRC, 3, 0x0f- 6 }, - { 5, BCR_ILCRC, 2, 0x0f- 5 }, - { 4, BCR_ILCRC, 1, 0x0f- 4 }, - { 3, BCR_ILCRC, 0, 0x0f- 3 }, - { 1, BCR_ILCRD, 3, 0x0f- 1 }, - - { 10, BCR_ILCRD, 1, 0x0f-10 }, /* LAN */ - - { 0, BCR_ILCRE, 3, 0x0f- 0 }, /* PCIRQ3 */ - { 11, BCR_ILCRE, 2, 0x0f-11 }, /* PCIRQ2 */ - { 9, BCR_ILCRE, 1, 0x0f- 9 }, /* PCIRQ1 */ - { 7, BCR_ILCRE, 0, 0x0f- 7 }, /* PCIRQ0 */ - + { 14, 0, 8, 0x0f-14 ,BCR_ILCRA}, + { 12, 0, 4, 0x0f-12 ,BCR_ILCRA}, + { 8, 0, 4, 0x0f- 8 ,BCR_ILCRB}, + { 6, 0, 12, 0x0f- 6 ,BCR_ILCRC}, + { 5, 0, 8, 0x0f- 5 ,BCR_ILCRC}, + { 4, 0, 4, 0x0f- 4 ,BCR_ILCRC}, + { 3, 0, 0, 0x0f- 3 ,BCR_ILCRC}, + { 1, 0, 12, 0x0f- 1 ,BCR_ILCRD}, + /* ST NIC */ + { 10, 0, 4, 0x0f-10 ,BCR_ILCRD}, /* LAN */ + /* MRSHPC IRQs setting */ + { 0, 0, 12, 0x0f- 0 ,BCR_ILCRE}, /* PCIRQ3 */ + { 11, 0, 8, 0x0f-11 ,BCR_ILCRE}, /* PCIRQ2 */ + { 9, 0, 4, 0x0f- 9 ,BCR_ILCRE}, /* PCIRQ1 */ + { 7, 0, 0, 0x0f- 7 ,BCR_ILCRE}, /* PCIRQ0 */ /* #2, #13 are allocated for SLOT IRQ #1 and #2 (for now) */ /* NOTE: #2 and #13 are not used on PC */ - { 13, BCR_ILCRG, 1, 0x0f-13 }, /* SLOTIRQ2 */ - { 2, BCR_ILCRG, 0, 0x0f- 2 }, /* SLOTIRQ1 */ + { 13, 0, 4, 0x0f-13 ,BCR_ILCRG}, /* SLOTIRQ2 */ + { 2, 0, 0, 0x0f- 2 ,BCR_ILCRG}, /* SLOTIRQ1 */ #endif }; @@ -81,5 +121,5 @@ void __init init_se_IRQ(void) ctrl_outw(0, BCR_ILCRF); ctrl_outw(0, BCR_ILCRG); #endif - make_ipr_irq(se770x_ipr_map, ARRAY_SIZE(se770x_ipr_map)); + make_se770x_irq(se770x_ipr_map, ARRAY_SIZE(se770x_ipr_map)); } diff --git a/arch/sh/boards/se/770x/setup.c b/arch/sh/boards/se/770x/setup.c index a1d51d5fa925..84f2e4857c63 100644 --- a/arch/sh/boards/se/770x/setup.c +++ b/arch/sh/boards/se/770x/setup.c @@ -1,5 +1,4 @@ -/* $Id: setup.c,v 1.1.2.4 2002/03/02 21:57:07 lethal Exp $ - * +/* * linux/arch/sh/boards/se/770x/setup.c * * Copyright (C) 2000 Kazumoto Kojima @@ -36,11 +35,6 @@ static void __init smsc_setup(char **cmdline_p) smsc_config(ACTIVATE_INDEX, 0x01); smsc_config(IRQ_SELECT_INDEX, 6); /* IRQ6 */ - /* IDE1 */ - smsc_config(CURRENT_LDN_INDEX, LDN_IDE1); - smsc_config(ACTIVATE_INDEX, 0x01); - smsc_config(IRQ_SELECT_INDEX, 14); /* IRQ14 */ - /* AUXIO (GPIO): to use IDE1 */ smsc_config(CURRENT_LDN_INDEX, LDN_AUXIO); smsc_config(GPIO46_INDEX, 0x00); /* nIOROP */ -- cgit v1.2.3 From 7a847f819063b80cc5b38d39e8aad4d60f6ca2fd Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 26 Dec 2006 15:29:19 +0900 Subject: sh: More tidying for large base pages. There were a few more things that needed fixing up, namely THREAD_SIZE and the TLB miss handler where certain PTRS_PER_PGD == PTRS_PER_PTE assumptions were being made. Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 2 ++ arch/sh/kernel/cpu/sh3/entry.S | 10 +++------- 2 files changed, 5 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 4f3891215b87..04cbc88e9b9f 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -596,6 +596,8 @@ menu "Boot options" config ZERO_PAGE_OFFSET hex "Zero page offset" default "0x00004000" if SH_MPC1211 || SH_SH03 + default "0x00010000" if PAGE_SIZE_64KB + default "0x00002000" if PAGE_SIZE_8KB default "0x00001000" help This sets the default offset of zero page. diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S index 014ac37ca16a..1c520358ba90 100644 --- a/arch/sh/kernel/cpu/sh3/entry.S +++ b/arch/sh/kernel/cpu/sh3/entry.S @@ -332,12 +332,6 @@ general_exception: ! ! -/* This code makes some assumptions to improve performance. - * Make sure they are stil true. */ -#if PTRS_PER_PGD != PTRS_PER_PTE -#error PGD and PTE sizes don't match -#endif - /* gas doesn't flag impossible values for mov #immediate as an error */ #if (_PAGE_PRESENT >> 2) > 0x7f #error cannot load PAGE_PRESENT as an immediate @@ -399,6 +393,7 @@ tlb_miss: bt 20f ! 110 BR + mov.w 3f, k3 ! 8 LS (latency=2) (PTRS_PER_PTE-1) << 2 and k3, k0 ! 78 EX mov.w 5f, k4 ! 8 LS (latency=2) _PAGE_PRESENT @@ -491,8 +486,9 @@ tlb_miss: .align 5 ! Once cache line if possible... 1: .long swapper_pg_dir +3: .short (PTRS_PER_PTE-1) << 2 4: .short (PTRS_PER_PGD-1) << 2 -5: .short _PAGE_PRESENT +5: .long _PAGE_PRESENT 7: .long _PAGE_FLAGS_HARDWARE_MASK 8: .long MMU_PTEH #ifdef COUNT_EXCEPTIONS -- cgit v1.2.3 From 26b7a78c55fbc0e23a7dc19e89fd50f200efc002 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 28 Dec 2006 10:31:48 +0900 Subject: sh: Lazy dcache writeback optimizations. This converts the lazy dcache handling to the model described in Documentation/cachetlb.txt and drops the ptep_get_and_clear() hacks used for the aliasing dcaches on SH-4 and SH7705 in 32kB mode. As a bonus, this slightly cuts down on the cache flushing frequency. With that and the PTEA handling out of the way, the update_mmu_cache() implementations can be consolidated, and we no longer have to worry about which configuration the cache is in for the SH7705 case. And finally, explicitly disable the lazy writeback on SMP (SH-4A). Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh4/probe.c | 4 --- arch/sh/mm/Kconfig | 2 +- arch/sh/mm/cache-sh4.c | 12 +++++++- arch/sh/mm/cache-sh7705.c | 9 ++++-- arch/sh/mm/pg-sh4.c | 22 -------------- arch/sh/mm/pg-sh7705.c | 31 ++----------------- arch/sh/mm/tlb-flush.c | 55 +++++++++++++++++++++++++++++++++- arch/sh/mm/tlb-sh3.c | 63 +------------------------------------- arch/sh/mm/tlb-sh4.c | 68 +----------------------------------------- 9 files changed, 76 insertions(+), 190 deletions(-) (limited to 'arch') diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c index 9031a22a2ce7..b26e2bc5894d 100644 --- a/arch/sh/kernel/cpu/sh4/probe.c +++ b/arch/sh/kernel/cpu/sh4/probe.c @@ -181,10 +181,6 @@ int __init detect_cpu_and_cache_system(void) cpu_data->dcache.ways = 1; #endif -#ifdef CONFIG_CPU_HAS_PTEA - cpu_data->flags |= CPU_HAS_PTEA; -#endif - /* * On anything that's not a direct-mapped cache, look to the CVR * for I/D-cache specifics. diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig index fddf6680ec4f..28b5102e1cdc 100644 --- a/arch/sh/mm/Kconfig +++ b/arch/sh/mm/Kconfig @@ -20,7 +20,7 @@ config CPU_SH4 bool select CPU_HAS_INTEVT select CPU_HAS_SR_RB - select CPU_HAS_PTEA if !CPU_SUBTYPE_ST40 + select CPU_HAS_PTEA if (!CPU_SUBTYPE_ST40 && !CPU_SH4A) || CPU_SHX2 config CPU_SH4A bool diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c index c6955157c989..72bb48773337 100644 --- a/arch/sh/mm/cache-sh4.c +++ b/arch/sh/mm/cache-sh4.c @@ -236,10 +236,20 @@ static inline void flush_cache_4096(unsigned long start, /* * Write back & invalidate the D-cache of the page. * (To avoid "alias" issues) + * + * This uses a lazy write-back on UP, which is explicitly + * disabled on SMP. */ void flush_dcache_page(struct page *page) { - if (test_bit(PG_mapped, &page->flags)) { +#ifndef CONFIG_SMP + struct address_space *mapping = page_mapping(page); + + if (mapping && !mapping_mapped(mapping)) + set_bit(PG_dcache_dirty, &page->flags); + else +#endif + { unsigned long phys = PHYSADDR(page_address(page)); unsigned long addr = CACHE_OC_ADDRESS_ARRAY; int i, n; diff --git a/arch/sh/mm/cache-sh7705.c b/arch/sh/mm/cache-sh7705.c index 045abdf078f5..2808b580d984 100644 --- a/arch/sh/mm/cache-sh7705.c +++ b/arch/sh/mm/cache-sh7705.c @@ -3,11 +3,11 @@ * * Copyright (C) 1999, 2000 Niibe Yutaka * Copyright (C) 2004 Alex Song + * Copyright (C) 2006 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. - * */ #include #include @@ -51,7 +51,6 @@ static inline void cache_wback_all(void) if ((data & v) == v) ctrl_outl(data & ~v, addr); - } addrstart += cpu_data->dcache.way_incr; @@ -128,7 +127,11 @@ static void __flush_dcache_page(unsigned long phys) */ void flush_dcache_page(struct page *page) { - if (test_bit(PG_mapped, &page->flags)) + struct address_space *mapping = page_mapping(page); + + if (mapping && !mapping_mapped(mapping)) + set_bit(PG_dcache_dirty, &page->flags); + else __flush_dcache_page(PHYSADDR(page_address(page))); } diff --git a/arch/sh/mm/pg-sh4.c b/arch/sh/mm/pg-sh4.c index 3f98d2a4f936..cfc323551741 100644 --- a/arch/sh/mm/pg-sh4.c +++ b/arch/sh/mm/pg-sh4.c @@ -23,7 +23,6 @@ extern struct mutex p3map_mutex[]; */ void clear_user_page(void *to, unsigned long address, struct page *page) { - __set_bit(PG_mapped, &page->flags); if (((address ^ (unsigned long)to) & CACHE_ALIAS) == 0) clear_page(to); else { @@ -59,7 +58,6 @@ void clear_user_page(void *to, unsigned long address, struct page *page) void copy_user_page(void *to, void *from, unsigned long address, struct page *page) { - __set_bit(PG_mapped, &page->flags); if (((address ^ (unsigned long)to) & CACHE_ALIAS) == 0) copy_page(to, from); else { @@ -84,23 +82,3 @@ void copy_user_page(void *to, void *from, unsigned long address, mutex_unlock(&p3map_mutex[(address & CACHE_ALIAS)>>12]); } } - -/* - * For SH-4, we have our own implementation for ptep_get_and_clear - */ -inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) -{ - pte_t pte = *ptep; - - pte_clear(mm, addr, ptep); - if (!pte_not_present(pte)) { - unsigned long pfn = pte_pfn(pte); - if (pfn_valid(pfn)) { - struct page *page = pfn_to_page(pfn); - struct address_space *mapping = page_mapping(page); - if (!mapping || !mapping_writably_mapped(mapping)) - __clear_bit(PG_mapped, &page->flags); - } - } - return pte; -} diff --git a/arch/sh/mm/pg-sh7705.c b/arch/sh/mm/pg-sh7705.c index ff9ece986cbc..b052d0fee827 100644 --- a/arch/sh/mm/pg-sh7705.c +++ b/arch/sh/mm/pg-sh7705.c @@ -7,9 +7,7 @@ * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. - * */ - #include #include #include @@ -76,7 +74,6 @@ void clear_user_page(void *to, unsigned long address, struct page *pg) { struct page *page = virt_to_page(to); - __set_bit(PG_mapped, &page->flags); if (((address ^ (unsigned long)to) & CACHE_ALIAS) == 0) { clear_page(to); __flush_wback_region(to, PAGE_SIZE); @@ -95,12 +92,11 @@ void clear_user_page(void *to, unsigned long address, struct page *pg) * @from: P1 address * @address: U0 address to be mapped */ -void copy_user_page(void *to, void *from, unsigned long address, struct page *pg) +void copy_user_page(void *to, void *from, unsigned long address, + struct page *pg) { struct page *page = virt_to_page(to); - - __set_bit(PG_mapped, &page->flags); if (((address ^ (unsigned long)to) & CACHE_ALIAS) == 0) { copy_page(to, from); __flush_wback_region(to, PAGE_SIZE); @@ -112,26 +108,3 @@ void copy_user_page(void *to, void *from, unsigned long address, struct page *pg __flush_wback_region(to, PAGE_SIZE); } } - -/* - * For SH7705, we have our own implementation for ptep_get_and_clear - * Copied from pg-sh4.c - */ -inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) -{ - pte_t pte = *ptep; - - pte_clear(mm, addr, ptep); - if (!pte_not_present(pte)) { - unsigned long pfn = pte_pfn(pte); - if (pfn_valid(pfn)) { - struct page *page = pfn_to_page(pfn); - struct address_space *mapping = page_mapping(page); - if (!mapping || !mapping_writably_mapped(mapping)) - __clear_bit(PG_mapped, &page->flags); - } - } - - return pte; -} - diff --git a/arch/sh/mm/tlb-flush.c b/arch/sh/mm/tlb-flush.c index 73ec7f6084fa..9347534aa894 100644 --- a/arch/sh/mm/tlb-flush.c +++ b/arch/sh/mm/tlb-flush.c @@ -2,15 +2,17 @@ * TLB flushing operations for SH with an MMU. * * Copyright (C) 1999 Niibe Yutaka - * Copyright (C) 2003 Paul Mundt + * Copyright (C) 2003 - 2006 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. */ #include +#include #include #include +#include void flush_tlb_page(struct vm_area_struct *vma, unsigned long page) { @@ -132,3 +134,54 @@ void flush_tlb_all(void) ctrl_barrier(); local_irq_restore(flags); } + +void update_mmu_cache(struct vm_area_struct *vma, + unsigned long address, pte_t pte) +{ + unsigned long flags; + unsigned long pteval; + unsigned long vpn; + struct page *page; + unsigned long pfn = pte_pfn(pte); + struct address_space *mapping; + + if (!pfn_valid(pfn)) + return; + + page = pfn_to_page(pfn); + mapping = page_mapping(page); + if (mapping) { + unsigned long phys = pte_val(pte) & PTE_PHYS_MASK; + int dirty = test_and_clear_bit(PG_dcache_dirty, &page->flags); + + if (dirty) + __flush_wback_region((void *)P1SEGADDR(phys), + PAGE_SIZE); + } + + local_irq_save(flags); + + /* Set PTEH register */ + vpn = (address & MMU_VPN_MASK) | get_asid(); + ctrl_outl(vpn, MMU_PTEH); + + pteval = pte_val(pte); + +#ifdef CONFIG_CPU_HAS_PTEA + /* Set PTEA register */ + /* TODO: make this look less hacky */ + ctrl_outl(((pteval >> 28) & 0xe) | (pteval & 0x1), MMU_PTEA); +#endif + + /* Set PTEL register */ + pteval &= _PAGE_FLAGS_HARDWARE_MASK; /* drop software flags */ +#ifdef CONFIG_SH_WRITETHROUGH + pteval |= _PAGE_WT; +#endif + /* conveniently, we want all the software flags to be 0 anyway */ + ctrl_outl(pteval, MMU_PTEL); + + /* Load the TLB */ + asm volatile("ldtlb": /* no output */ : /* no input */ : "memory"); + local_irq_restore(flags); +} diff --git a/arch/sh/mm/tlb-sh3.c b/arch/sh/mm/tlb-sh3.c index 46b09e26e082..16627069c536 100644 --- a/arch/sh/mm/tlb-sh3.c +++ b/arch/sh/mm/tlb-sh3.c @@ -8,69 +8,9 @@ * * Released under the terms of the GNU GPL v2.0. */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - +#include #include -#include -#include -#include #include -#include - -void update_mmu_cache(struct vm_area_struct * vma, - unsigned long address, pte_t pte) -{ - unsigned long flags; - unsigned long pteval; - unsigned long vpn; - - /* Ptrace may call this routine. */ - if (vma && current->active_mm != vma->vm_mm) - return; - -#if defined(CONFIG_SH7705_CACHE_32KB) - { - struct page *page = pte_page(pte); - unsigned long pfn = pte_pfn(pte); - - if (pfn_valid(pfn) && !test_bit(PG_mapped, &page->flags)) { - unsigned long phys = pte_val(pte) & PTE_PHYS_MASK; - - __flush_wback_region((void *)P1SEGADDR(phys), - PAGE_SIZE); - __set_bit(PG_mapped, &page->flags); - } - } -#endif - - local_irq_save(flags); - - /* Set PTEH register */ - vpn = (address & MMU_VPN_MASK) | get_asid(); - ctrl_outl(vpn, MMU_PTEH); - - pteval = pte_val(pte); - - /* Set PTEL register */ - pteval &= _PAGE_FLAGS_HARDWARE_MASK; /* drop software flags */ - /* conveniently, we want all the software flags to be 0 anyway */ - ctrl_outl(pteval, MMU_PTEL); - - /* Load the TLB */ - asm volatile("ldtlb": /* no output */ : /* no input */ : "memory"); - local_irq_restore(flags); -} void __flush_tlb_page(unsigned long asid, unsigned long page) { @@ -94,4 +34,3 @@ void __flush_tlb_page(unsigned long asid, unsigned long page) for (i = 0; i < ways; i++) ctrl_outl(data, addr + (i << 8)); } - diff --git a/arch/sh/mm/tlb-sh4.c b/arch/sh/mm/tlb-sh4.c index 812b2d567de2..758d8dec622b 100644 --- a/arch/sh/mm/tlb-sh4.c +++ b/arch/sh/mm/tlb-sh4.c @@ -8,74 +8,9 @@ * * Released under the terms of the GNU GPL v2.0. */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - +#include #include -#include -#include -#include #include -#include - -void update_mmu_cache(struct vm_area_struct * vma, - unsigned long address, pte_t pte) -{ - unsigned long flags; - unsigned long pteval; - unsigned long vpn; - struct page *page; - unsigned long pfn; - - /* Ptrace may call this routine. */ - if (vma && current->active_mm != vma->vm_mm) - return; - - pfn = pte_pfn(pte); - if (pfn_valid(pfn)) { - page = pfn_to_page(pfn); - if (!test_bit(PG_mapped, &page->flags)) { - unsigned long phys = pte_val(pte) & PTE_PHYS_MASK; - __flush_wback_region((void *)P1SEGADDR(phys), PAGE_SIZE); - __set_bit(PG_mapped, &page->flags); - } - } - - local_irq_save(flags); - - /* Set PTEH register */ - vpn = (address & MMU_VPN_MASK) | get_asid(); - ctrl_outl(vpn, MMU_PTEH); - - pteval = pte_val(pte); - - /* Set PTEA register */ - if (cpu_data->flags & CPU_HAS_PTEA) - /* TODO: make this look less hacky */ - ctrl_outl(((pteval >> 28) & 0xe) | (pteval & 0x1), MMU_PTEA); - - /* Set PTEL register */ - pteval &= _PAGE_FLAGS_HARDWARE_MASK; /* drop software flags */ -#ifdef CONFIG_SH_WRITETHROUGH - pteval |= _PAGE_WT; -#endif - /* conveniently, we want all the software flags to be 0 anyway */ - ctrl_outl(pteval, MMU_PTEL); - - /* Load the TLB */ - asm volatile("ldtlb": /* no output */ : /* no input */ : "memory"); - local_irq_restore(flags); -} void __flush_tlb_page(unsigned long asid, unsigned long page) { @@ -93,4 +28,3 @@ void __flush_tlb_page(unsigned long asid, unsigned long page) ctrl_outl(data, addr); back_to_P1(); } - -- cgit v1.2.3 From adac9570966eb2eb137209e552b258d4d1d4825b Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 28 Dec 2006 10:54:01 +0900 Subject: sh: Don't set reserved _PAGE_WT bit on SH-3. Only SH-4 needs to set _PAGE_WT when using write-through caching, don't attempt to set it on SH-3 where it ends up being a reserved bit. Signed-off-by: Paul Mundt --- arch/sh/mm/tlb-flush.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sh/mm/tlb-flush.c b/arch/sh/mm/tlb-flush.c index 9347534aa894..ef3e4d477864 100644 --- a/arch/sh/mm/tlb-flush.c +++ b/arch/sh/mm/tlb-flush.c @@ -175,7 +175,7 @@ void update_mmu_cache(struct vm_area_struct *vma, /* Set PTEL register */ pteval &= _PAGE_FLAGS_HARDWARE_MASK; /* drop software flags */ -#ifdef CONFIG_SH_WRITETHROUGH +#if defined(CONFIG_SH_WRITETHROUGH) && defined(CONFIG_CPU_SH4) pteval |= _PAGE_WT; #endif /* conveniently, we want all the software flags to be 0 anyway */ -- cgit v1.2.3 From 86b67ef7518d1fcd4489dc464d4c33a274a1c635 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Mon, 1 Jan 2007 09:21:43 +0900 Subject: sh: Fix handle_BUG() compile error. handle_BUG() uses TRAPA_BUG_OPCODE which is only defined for CONFIG_BUG, make sure it's not built when CONFIG_BUG=n. Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Paul Mundt --- arch/sh/kernel/traps.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sh/kernel/traps.c b/arch/sh/kernel/traps.c index ec110157992d..e91224faf6c4 100644 --- a/arch/sh/kernel/traps.c +++ b/arch/sh/kernel/traps.c @@ -156,13 +156,13 @@ static inline void do_bug_verbose(struct pt_regs *regs) { } #endif /* CONFIG_DEBUG_BUGVERBOSE */ -#endif /* CONFIG_BUG */ void handle_BUG(struct pt_regs *regs) { do_bug_verbose(regs); die("Kernel BUG", regs, TRAPA_BUG_OPCODE & 0xff); } +#endif /* CONFIG_BUG */ /* * handle an instruction that does an unaligned memory access by emulating the -- cgit v1.2.3 From 6dcda6f1ecef86209ac161631837bc57172ba049 Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Thu, 25 Jan 2007 15:21:03 +0900 Subject: sh: add SH7760 IPR IRQ data Add SH7760 IPR IRQ data; makes 2.6.20-rc bootable again. Signed-off-by: Manuel Lauss Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh4/setup-sh7760.c | 66 +++++++++++++++++++++++++++-------- arch/sh/mm/Kconfig | 1 + 2 files changed, 52 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7760.c b/arch/sh/kernel/cpu/sh4/setup-sh7760.c index 07e5377bf550..b7c702821e6f 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7760.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7760.c @@ -52,17 +52,11 @@ static int __init sh7760_devices_setup(void) } __initcall(sh7760_devices_setup); -/* - * SH7760 INTC2-Style interrupts, vectors IRQ48-111 INTEVT 0x800-0xFE0 - */ static struct intc2_data intc2_irq_table[] = { - /* INTPRIO0 | INTMSK0 */ {48, 0, 28, 0, 31, 3}, /* IRQ 4 */ {49, 0, 24, 0, 30, 3}, /* IRQ 3 */ {50, 0, 20, 0, 29, 3}, /* IRQ 2 */ {51, 0, 16, 0, 28, 3}, /* IRQ 1 */ - /* 52-55 (INTEVT 0x880-0x8E0) unused/reserved */ - /* INTPRIO4 | INTMSK0 */ {56, 4, 28, 0, 25, 3}, /* HCAN2_CHAN0 */ {57, 4, 24, 0, 24, 3}, /* HCAN2_CHAN1 */ {58, 4, 20, 0, 23, 3}, /* I2S_CHAN0 */ @@ -71,18 +65,15 @@ static struct intc2_data intc2_irq_table[] = { {61, 4, 8, 0, 20, 3}, /* AC97_CHAN1 */ {62, 4, 4, 0, 19, 3}, /* I2C_CHAN0 */ {63, 4, 0, 0, 18, 3}, /* I2C_CHAN1 */ - /* INTPRIO8 | INTMSK0 */ {52, 8, 16, 0, 11, 3}, /* SCIF0_ERI_IRQ */ {53, 8, 16, 0, 10, 3}, /* SCIF0_RXI_IRQ */ {54, 8, 16, 0, 9, 3}, /* SCIF0_BRI_IRQ */ {55, 8, 16, 0, 8, 3}, /* SCIF0_TXI_IRQ */ {64, 8, 28, 0, 17, 3}, /* USBHI_IRQ */ {65, 8, 24, 0, 16, 3}, /* LCDC */ - /* 66, 67 unused */ {68, 8, 20, 0, 14, 13}, /* DMABRGI0_IRQ */ {69, 8, 20, 0, 13, 13}, /* DMABRGI1_IRQ */ {70, 8, 20, 0, 12, 13}, /* DMABRGI2_IRQ */ - /* 71 unused */ {72, 8, 12, 0, 7, 3}, /* SCIF1_ERI_IRQ */ {73, 8, 12, 0, 6, 3}, /* SCIF1_RXI_IRQ */ {74, 8, 12, 0, 5, 3}, /* SCIF1_BRI_IRQ */ @@ -91,26 +82,71 @@ static struct intc2_data intc2_irq_table[] = { {77, 8, 8, 0, 2, 3}, /* SCIF2_RXI_IRQ */ {78, 8, 8, 0, 1, 3}, /* SCIF2_BRI_IRQ */ {79, 8, 8, 0, 0, 3}, /* SCIF2_TXI_IRQ */ - /* | INTMSK4 */ {80, 8, 4, 4, 23, 3}, /* SIM_ERI */ {81, 8, 4, 4, 22, 3}, /* SIM_RXI */ {82, 8, 4, 4, 21, 3}, /* SIM_TXI */ {83, 8, 4, 4, 20, 3}, /* SIM_TEI */ {84, 8, 0, 4, 19, 3}, /* HSPII */ - /* INTPRIOC | INTMSK4 */ - /* 85-87 unused/reserved */ {88, 12, 20, 4, 18, 3}, /* MMCI0 */ {89, 12, 20, 4, 17, 3}, /* MMCI1 */ {90, 12, 20, 4, 16, 3}, /* MMCI2 */ {91, 12, 20, 4, 15, 3}, /* MMCI3 */ - {92, 12, 12, 4, 6, 3}, /* MFI (unsure, bug? in my 7760 manual*/ - /* 93-107 reserved/undocumented */ + {92, 12, 12, 4, 6, 3}, /* MFI */ {108,12, 4, 4, 1, 3}, /* ADC */ {109,12, 0, 4, 0, 3}, /* CMTI */ - /* 110-111 reserved/unused */ }; +static struct ipr_data sh7760_ipr_map[] = { + /* IRQ, IPR-idx, shift, priority */ + { 16, 0, 12, 2 }, /* TMU0 TUNI*/ + { 17, 0, 8, 2 }, /* TMU1 TUNI */ + { 18, 0, 4, 2 }, /* TMU2 TUNI */ + { 19, 0, 4, 2 }, /* TMU2 TIPCI */ + { 27, 1, 12, 2 }, /* WDT ITI */ + { 28, 1, 8, 2 }, /* REF RCMI */ + { 29, 1, 8, 2 }, /* REF ROVI */ + { 32, 2, 0, 7 }, /* HUDI */ + { 33, 2, 12, 7 }, /* GPIOI */ + { 34, 2, 8, 7 }, /* DMAC DMTE0 */ + { 35, 2, 8, 7 }, /* DMAC DMTE1 */ + { 36, 2, 8, 7 }, /* DMAC DMTE2 */ + { 37, 2, 8, 7 }, /* DMAC DMTE3 */ + { 38, 2, 8, 7 }, /* DMAC DMAE */ + { 44, 2, 8, 7 }, /* DMAC DMTE4 */ + { 45, 2, 8, 7 }, /* DMAC DMTE5 */ + { 46, 2, 8, 7 }, /* DMAC DMTE6 */ + { 47, 2, 8, 7 }, /* DMAC DMTE7 */ +/* these here are only valid if INTC_ICR bit 7 is set to 1! + * XXX: maybe CONFIG_SH_IRLMODE symbol? SH7751 could use it too */ +#if 0 + { 2, 3, 12, 3 }, /* IRL0 */ + { 5, 3, 8, 3 }, /* IRL1 */ + { 8, 3, 4, 3 }, /* IRL2 */ + { 11, 3, 0, 3 }, /* IRL3 */ +#endif +}; + +static unsigned long ipr_offsets[] = { + 0xffd00004UL, /* 0: IPRA */ + 0xffd00008UL, /* 1: IPRB */ + 0xffd0000cUL, /* 2: IPRC */ + 0xffd00010UL, /* 3: IPRD */ +}; + +/* given the IPR index return the address of the IPR register */ +unsigned int map_ipridx_to_addr(int idx) +{ + if (idx >= ARRAY_SIZE(ipr_offsets)) + return 0; + return ipr_offsets[idx]; +} + void __init init_IRQ_intc2(void) { make_intc2_irq(intc2_irq_table, ARRAY_SIZE(intc2_irq_table)); } + +void __init init_IRQ_ipr(void) +{ + make_ipr_irq(sh7760_ipr_map, ARRAY_SIZE(sh7760_ipr_map)); +} diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig index 28b5102e1cdc..6b0d28ac9241 100644 --- a/arch/sh/mm/Kconfig +++ b/arch/sh/mm/Kconfig @@ -151,6 +151,7 @@ config CPU_SUBTYPE_SH7760 bool "Support SH7760 processor" select CPU_SH4 select CPU_HAS_INTC2_IRQ + select CPU_HAS_IPR_IRQ config CPU_SUBTYPE_SH4_202 bool "Support SH4-202 processor" -- cgit v1.2.3 From 9f8a5e3a44d81bbf19fddeb74645dec6b0e23b23 Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Thu, 25 Jan 2007 15:22:11 +0900 Subject: sh: SH-DMAC compile fixes This patch does the following: - remove the make_ipr_irq stuff from dma-sh.c and replace it with a simple channel<->irq mapping table. - add DMTEx_IRQ constants for sh4 cpus - fix sh7751 DMAE irq number The SH7780 uses the same IRQs for DMA as other SH4 types, so I put the constants on top of the dma.h file. Other CPU types need to #define their own DMTEx_IRQ contants in their appropriate header. Signed-off-by: Manuel Lauss Signed-off-by: Paul Mundt --- arch/sh/drivers/dma/dma-sh.c | 45 +++++++++++++---------------------- arch/sh/kernel/cpu/sh4/setup-sh7750.c | 2 +- 2 files changed, 17 insertions(+), 30 deletions(-) (limited to 'arch') diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c index f63721ed86c2..06ed0609a95d 100644 --- a/arch/sh/drivers/dma/dma-sh.c +++ b/arch/sh/drivers/dma/dma-sh.c @@ -19,34 +19,26 @@ #include #include "dma-sh.h" - - -#ifdef CONFIG_CPU_SH4 -static struct ipr_data dmae_ipr_map[] = { - { DMAE_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, -}; +static int dmte_irq_map[] = { + DMTE0_IRQ, + DMTE1_IRQ, + DMTE2_IRQ, + DMTE3_IRQ, +#if defined(CONFIG_CPU_SUBTYPE_SH7751R) || \ + defined(CONFIG_CPU_SUBTYPE_SH7760) || \ + defined(CONFIG_CPU_SUBTYPE_SH7780) + DMTE4_IRQ, + DMTE5_IRQ, + DMTE6_IRQ, + DMTE7_IRQ, #endif -static struct ipr_data dmte_ipr_map[] = { - /* - * Normally we could just do DMTE0_IRQ + chan outright, though in the - * case of the 7751R, the DMTE IRQs for channels > 4 start right above - * the SCIF - */ - { DMTE0_IRQ + 0, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, - { DMTE0_IRQ + 1, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, - { DMTE0_IRQ + 2, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, - { DMTE0_IRQ + 3, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, - { DMTE4_IRQ + 0, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, - { DMTE4_IRQ + 1, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, - { DMTE4_IRQ + 2, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, - { DMTE4_IRQ + 3, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, }; static inline unsigned int get_dmte_irq(unsigned int chan) { unsigned int irq = 0; - if (chan < ARRAY_SIZE(dmte_ipr_map)) - irq = dmte_ipr_map[chan].irq; + if (chan < ARRAY_SIZE(dmte_irq_map)) + irq = dmte_irq_map[chan]; return irq; } @@ -103,7 +95,7 @@ static void sh_dmac_free_dma(struct dma_channel *chan) free_irq(get_dmte_irq(chan->chan), chan); } -static void +static int sh_dmac_configure_channel(struct dma_channel *chan, unsigned long chcr) { if (!chcr) @@ -119,6 +111,7 @@ sh_dmac_configure_channel(struct dma_channel *chan, unsigned long chcr) ctrl_outl(chcr, CHCR[chan->chan]); chan->flags |= DMA_CONFIGURED; + return 0; } static void sh_dmac_enable_dma(struct dma_channel *chan) @@ -262,17 +255,11 @@ static int __init sh_dmac_init(void) int i; #ifdef CONFIG_CPU_SH4 - make_ipr_irq(dmae_ipr_map, ARRAY_SIZE(dmae_ipr_map)); i = request_irq(DMAE_IRQ, dma_err, IRQF_DISABLED, "DMAC Address Error", 0); if (unlikely(i < 0)) return i; #endif - i = info->nr_channels; - if (i > ARRAY_SIZE(dmte_ipr_map)) - i = ARRAY_SIZE(dmte_ipr_map); - make_ipr_irq(dmte_ipr_map, i); - /* * Initialize DMAOR, and clean up any error flags that may have * been set. diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7750.c b/arch/sh/kernel/cpu/sh4/setup-sh7750.c index cbac27634c0b..aa26245f0344 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7750.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7750.c @@ -101,7 +101,7 @@ static struct ipr_data sh7750_ipr_map[] = { { 35, 2, 8, 7 }, /* DMAC DMTE1 */ { 36, 2, 8, 7 }, /* DMAC DMTE2 */ { 37, 2, 8, 7 }, /* DMAC DMTE3 */ - { 28, 2, 8, 7 }, /* DMAC DMAE */ + { 38, 2, 8, 7 }, /* DMAC DMAE */ }; static struct ipr_data sh7751_ipr_map[] = { -- cgit v1.2.3 From dbbfa2da27fbf353caa8934768afbbf8d5e73d9b Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Wed, 7 Feb 2007 13:54:39 +0900 Subject: sh: Fixup SHMIN INTC register definitions. Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Paul Mundt --- arch/sh/boards/shmin/setup.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/sh/boards/shmin/setup.c b/arch/sh/boards/shmin/setup.c index bed9ca653d3a..4a9df4a6b034 100644 --- a/arch/sh/boards/shmin/setup.c +++ b/arch/sh/boards/shmin/setup.c @@ -13,14 +13,14 @@ #include #define PFC_PHCR 0xa400010eUL -#define INTC_ICR1 0xffd00000UL +#define INTC_ICR1 0xa4000010UL #define INTC_IPRC 0xa4000016UL static struct ipr_data shmin_ipr_map[] = { - { .irq=32, .addr=INTC_IPRC, .shift= 0, .priority=0 }, - { .irq=33, .addr=INTC_IPRC, .shift= 4, .priority=0 }, - { .irq=34, .addr=INTC_IPRC, .shift= 8, .priority=8 }, - { .irq=35, .addr=INTC_IPRC, .shift=12, .priority=0 }, + { .irq=32, .addr=INTC_IPRC, .shift= 0, .priority=0 }, + { .irq=33, .addr=INTC_IPRC, .shift= 4, .priority=0 }, + { .irq=34, .addr=INTC_IPRC, .shift= 8, .priority=8 }, + { .irq=35, .addr=INTC_IPRC, .shift=12, .priority=0 }, }; static void __init init_shmin_irq(void) -- cgit v1.2.3 From 506b85f4114b912d2e91fab8da9849289e43857f Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 7 Feb 2007 13:56:44 +0900 Subject: sh: add SH_CLK_MD Kconfig default. This option needs a default - otherwise `make allmodconfig' gets stuck in an infinite loop. Signed-off-by: Andrew Morton Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 04cbc88e9b9f..d18310ab4c70 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -481,6 +481,7 @@ config SH_PCLK_FREQ config SH_CLK_MD int "CPU Mode Pin Setting" + default 0 depends on CPU_SUBTYPE_SH7619 || CPU_SUBTYPE_SH7206 help MD2 - MD0 pin setting. -- cgit v1.2.3 From aec5e0e1c179fac4bbca4007a3f0d3107275a73c Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 25 Dec 2006 09:51:47 +0900 Subject: sh: Use a per-cpu ASID cache. Previously this was implemented using a global cache, cache this per-CPU instead and bump up the number of context IDs to match NR_CPUS. Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/init.c | 11 ++++++-- arch/sh/kernel/process.c | 66 ++++++++++++++++++++--------------------------- arch/sh/mm/init.c | 5 ---- arch/sh/mm/tlb-flush.c | 26 ++++++++++++------- 4 files changed, 53 insertions(+), 55 deletions(-) (limited to 'arch') diff --git a/arch/sh/kernel/cpu/init.c b/arch/sh/kernel/cpu/init.c index 48121766e8d2..6c3c7687e81f 100644 --- a/arch/sh/kernel/cpu/init.c +++ b/arch/sh/kernel/cpu/init.c @@ -3,7 +3,7 @@ * * CPU init code * - * Copyright (C) 2002, 2003 Paul Mundt + * Copyright (C) 2002 - 2006 Paul Mundt * Copyright (C) 2003 Richard Curnow * * This file is subject to the terms and conditions of the GNU General Public @@ -12,6 +12,8 @@ */ #include #include +#include +#include #include #include #include @@ -218,6 +220,12 @@ asmlinkage void __init sh_cpu_init(void) clear_used_math(); } + /* + * Initialize the per-CPU ASID cache very early, since the + * TLB flushing routines depend on this being setup. + */ + current_cpu_data.asid_cache = NO_CONTEXT; + #ifdef CONFIG_SH_DSP /* Probe for DSP */ dsp_init(); @@ -240,4 +248,3 @@ asmlinkage void __init sh_cpu_init(void) ubc_wakeup(); #endif } - diff --git a/arch/sh/kernel/process.c b/arch/sh/kernel/process.c index cc8f306fd682..0298f0faa6e6 100644 --- a/arch/sh/kernel/process.c +++ b/arch/sh/kernel/process.c @@ -1,42 +1,30 @@ -/* $Id: process.c,v 1.28 2004/05/05 16:54:23 lethal Exp $ +/* + * arch/sh/kernel/process.c * - * linux/arch/sh/kernel/process.c + * This file handles the architecture-dependent parts of process handling.. * * Copyright (C) 1995 Linus Torvalds * * SuperH version: Copyright (C) 1999, 2000 Niibe Yutaka & Kaz Kojima * Copyright (C) 2006 Lineo Solutions Inc. support SH4A UBC + * Copyright (C) 2002 - 2006 Paul Mundt */ - -/* - * This file handles the architecture-dependent parts of process handling.. - */ - #include -#include #include #include -#include -#include #include -#include #include #include - -#include #include #include -#include #include -static int hlt_counter=0; - +static int hlt_counter; int ubc_usercnt = 0; #define HARD_IDLE_TIMEOUT (HZ / 3) void (*pm_idle)(void); - void (*pm_power_off)(void); EXPORT_SYMBOL(pm_power_off); @@ -44,14 +32,12 @@ void disable_hlt(void) { hlt_counter++; } - EXPORT_SYMBOL(disable_hlt); void enable_hlt(void) { hlt_counter--; } - EXPORT_SYMBOL(enable_hlt); void default_idle(void) @@ -152,19 +138,21 @@ __asm__(".align 5\n" ".align 2\n\t" "1:.long do_exit"); +/* Don't use this in BL=1(cli). Or else, CPU resets! */ int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags) -{ /* Don't use this in BL=1(cli). Or else, CPU resets! */ +{ struct pt_regs regs; memset(®s, 0, sizeof(regs)); - regs.regs[4] = (unsigned long) arg; - regs.regs[5] = (unsigned long) fn; + regs.regs[4] = (unsigned long)arg; + regs.regs[5] = (unsigned long)fn; - regs.pc = (unsigned long) kernel_thread_helper; + regs.pc = (unsigned long)kernel_thread_helper; regs.sr = (1 << 30); /* Ok, create the new process.. */ - return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, ®s, 0, NULL, NULL); + return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, + ®s, 0, NULL, NULL); } /* @@ -211,21 +199,20 @@ int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpu) return fpvalid; } -/* +/* * Capture the user space registers if the task is not running (in user space) */ int dump_task_regs(struct task_struct *tsk, elf_gregset_t *regs) { struct pt_regs ptregs; - + ptregs = *task_pt_regs(tsk); elf_core_copy_regs(regs, &ptregs); return 1; } -int -dump_task_fpu (struct task_struct *tsk, elf_fpregset_t *fpu) +int dump_task_fpu(struct task_struct *tsk, elf_fpregset_t *fpu) { int fpvalid = 0; @@ -263,12 +250,14 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp, childregs->regs[15] = usp; ti->addr_limit = USER_DS; } else { - childregs->regs[15] = (unsigned long)task_stack_page(p) + THREAD_SIZE; + childregs->regs[15] = (unsigned long)task_stack_page(p) + + THREAD_SIZE; ti->addr_limit = KERNEL_DS; } - if (clone_flags & CLONE_SETTLS) { + + if (clone_flags & CLONE_SETTLS) childregs->gbr = childregs->regs[0]; - } + childregs->regs[0] = 0; /* Set return value for child */ p->thread.sp = (unsigned long) childregs; @@ -280,8 +269,7 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp, } /* Tracing by user break controller. */ -static void -ubc_set_tracing(int asid, unsigned long pc) +static void ubc_set_tracing(int asid, unsigned long pc) { #if defined(CONFIG_CPU_SH4A) unsigned long val; @@ -297,7 +285,7 @@ ubc_set_tracing(int asid, unsigned long pc) val = (UBC_CRR_RES | UBC_CRR_PCB | UBC_CRR_BIE); ctrl_outl(val, UBC_CRR0); - /* Read UBC register that we writed last. For chekking UBC Register changed */ + /* Read UBC register that we wrote last, for checking update */ val = ctrl_inl(UBC_CRR0); #else /* CONFIG_CPU_SH4A */ @@ -325,7 +313,8 @@ ubc_set_tracing(int asid, unsigned long pc) * switch_to(x,y) should switch tasks from x to y. * */ -struct task_struct *__switch_to(struct task_struct *prev, struct task_struct *next) +struct task_struct *__switch_to(struct task_struct *prev, + struct task_struct *next) { #if defined(CONFIG_SH_FPU) unlazy_fpu(prev, task_pt_regs(prev)); @@ -354,7 +343,7 @@ struct task_struct *__switch_to(struct task_struct *prev, struct task_struct *ne #ifdef CONFIG_MMU /* * Restore the kernel mode register - * k7 (r7_bank1) + * k7 (r7_bank1) */ asm volatile("ldc %0, r7_bank" : /* no output */ @@ -367,7 +356,7 @@ struct task_struct *__switch_to(struct task_struct *prev, struct task_struct *ne else if (next->thread.ubc_pc && next->mm) { int asid = 0; #ifdef CONFIG_MMU - asid |= next->mm->context.id & MMU_CONTEXT_ASID_MASK; + asid |= cpu_asid(smp_processor_id(), next->mm); #endif ubc_set_tracing(asid, next->thread.ubc_pc); } else { @@ -405,7 +394,8 @@ asmlinkage int sys_clone(unsigned long clone_flags, unsigned long newsp, if (!newsp) newsp = regs->regs[15]; return do_fork(clone_flags, newsp, regs, 0, - (int __user *)parent_tidptr, (int __user *)child_tidptr); + (int __user *)parent_tidptr, + (int __user *)child_tidptr); } /* diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c index bf0c263cb6fd..d172065182fb 100644 --- a/arch/sh/mm/init.c +++ b/arch/sh/mm/init.c @@ -39,11 +39,6 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); pgd_t swapper_pg_dir[PTRS_PER_PGD]; -/* - * Cache of MMU context last used. - */ -unsigned long mmu_context_cache = NO_CONTEXT; - #ifdef CONFIG_MMU /* It'd be good if these lines were in the standard header file. */ #define START_PFN (NODE_DATA(0)->bdata->node_boot_start >> PAGE_SHIFT) diff --git a/arch/sh/mm/tlb-flush.c b/arch/sh/mm/tlb-flush.c index ef3e4d477864..b829c17c1d17 100644 --- a/arch/sh/mm/tlb-flush.c +++ b/arch/sh/mm/tlb-flush.c @@ -16,12 +16,14 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long page) { - if (vma->vm_mm && vma->vm_mm->context.id != NO_CONTEXT) { + unsigned int cpu = smp_processor_id(); + + if (vma->vm_mm && cpu_context(cpu, vma->vm_mm) != NO_CONTEXT) { unsigned long flags; unsigned long asid; unsigned long saved_asid = MMU_NO_ASID; - asid = vma->vm_mm->context.id & MMU_CONTEXT_ASID_MASK; + asid = cpu_asid(cpu, vma->vm_mm); page &= PAGE_MASK; local_irq_save(flags); @@ -40,22 +42,23 @@ void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end) { struct mm_struct *mm = vma->vm_mm; + unsigned int cpu = smp_processor_id(); - if (mm->context.id != NO_CONTEXT) { + if (cpu_context(cpu, mm) != NO_CONTEXT) { unsigned long flags; int size; local_irq_save(flags); size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT; if (size > (MMU_NTLB_ENTRIES/4)) { /* Too many TLB to flush */ - mm->context.id = NO_CONTEXT; + cpu_context(cpu, mm) = NO_CONTEXT; if (mm == current->mm) - activate_context(mm); + activate_context(mm, cpu); } else { unsigned long asid; unsigned long saved_asid = MMU_NO_ASID; - asid = mm->context.id & MMU_CONTEXT_ASID_MASK; + asid = cpu_asid(cpu, mm); start &= PAGE_MASK; end += (PAGE_SIZE - 1); end &= PAGE_MASK; @@ -76,6 +79,7 @@ void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, void flush_tlb_kernel_range(unsigned long start, unsigned long end) { + unsigned int cpu = smp_processor_id(); unsigned long flags; int size; @@ -87,7 +91,7 @@ void flush_tlb_kernel_range(unsigned long start, unsigned long end) unsigned long asid; unsigned long saved_asid = get_asid(); - asid = init_mm.context.id & MMU_CONTEXT_ASID_MASK; + asid = cpu_asid(cpu, &init_mm); start &= PAGE_MASK; end += (PAGE_SIZE - 1); end &= PAGE_MASK; @@ -103,15 +107,17 @@ void flush_tlb_kernel_range(unsigned long start, unsigned long end) void flush_tlb_mm(struct mm_struct *mm) { + unsigned int cpu = smp_processor_id(); + /* Invalidate all TLB of this process. */ /* Instead of invalidating each TLB, we get new MMU context. */ - if (mm->context.id != NO_CONTEXT) { + if (cpu_context(cpu, mm) != NO_CONTEXT) { unsigned long flags; local_irq_save(flags); - mm->context.id = NO_CONTEXT; + cpu_context(cpu, mm) = NO_CONTEXT; if (mm == current->mm) - activate_context(mm); + activate_context(mm, cpu); local_irq_restore(flags); } } -- cgit v1.2.3 From 11c1965687b0a472add948d4240dfe65a2fcb298 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 25 Dec 2006 10:19:56 +0900 Subject: sh: Fixup cpu_data references for the non-boot CPUs. There are a lot of bogus cpu_data-> references that only end up working for the boot CPU, convert these to current_cpu_data to fixup SMP. Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/init.c | 30 +++--- arch/sh/kernel/cpu/sh2/probe.c | 32 +++---- arch/sh/kernel/cpu/sh2a/probe.c | 16 ++-- arch/sh/kernel/cpu/sh3/probe.c | 42 ++++----- arch/sh/kernel/cpu/sh4/probe.c | 185 +++++++++++++++++++------------------ arch/sh/kernel/process.c | 5 +- arch/sh/kernel/setup.c | 49 +++++----- arch/sh/kernel/signal.c | 6 +- arch/sh/kernel/traps.c | 2 +- arch/sh/mm/cache-debugfs.c | 4 +- arch/sh/mm/cache-sh3.c | 8 +- arch/sh/mm/cache-sh4.c | 65 ++++++------- arch/sh/mm/cache-sh7705.c | 20 ++-- arch/sh/mm/pg-sh4.c | 2 +- arch/sh/mm/pg-sh7705.c | 6 +- arch/sh/mm/tlb-sh3.c | 2 +- arch/sh/oprofile/op_model_sh7750.c | 2 +- 17 files changed, 244 insertions(+), 232 deletions(-) (limited to 'arch') diff --git a/arch/sh/kernel/cpu/init.c b/arch/sh/kernel/cpu/init.c index 6c3c7687e81f..4b339a640b13 100644 --- a/arch/sh/kernel/cpu/init.c +++ b/arch/sh/kernel/cpu/init.c @@ -48,7 +48,7 @@ static void __init cache_init(void) { unsigned long ccr, flags; - if (cpu_data->type == CPU_SH_NONE) + if (current_cpu_data.type == CPU_SH_NONE) panic("Unknown CPU"); jump_to_P2(); @@ -68,7 +68,7 @@ static void __init cache_init(void) if (ccr & CCR_CACHE_ENABLE) { unsigned long ways, waysize, addrstart; - waysize = cpu_data->dcache.sets; + waysize = current_cpu_data.dcache.sets; #ifdef CCR_CACHE_ORA /* @@ -79,7 +79,7 @@ static void __init cache_init(void) waysize >>= 1; #endif - waysize <<= cpu_data->dcache.entry_shift; + waysize <<= current_cpu_data.dcache.entry_shift; #ifdef CCR_CACHE_EMODE /* If EMODE is not set, we only have 1 way to flush. */ @@ -87,7 +87,7 @@ static void __init cache_init(void) ways = 1; else #endif - ways = cpu_data->dcache.ways; + ways = current_cpu_data.dcache.ways; addrstart = CACHE_OC_ADDRESS_ARRAY; do { @@ -95,10 +95,10 @@ static void __init cache_init(void) for (addr = addrstart; addr < addrstart + waysize; - addr += cpu_data->dcache.linesz) + addr += current_cpu_data.dcache.linesz) ctrl_outl(0, addr); - addrstart += cpu_data->dcache.way_incr; + addrstart += current_cpu_data.dcache.way_incr; } while (--ways); } @@ -110,7 +110,7 @@ static void __init cache_init(void) #ifdef CCR_CACHE_EMODE /* Force EMODE if possible */ - if (cpu_data->dcache.ways > 1) + if (current_cpu_data.dcache.ways > 1) flags |= CCR_CACHE_EMODE; else flags &= ~CCR_CACHE_EMODE; @@ -127,10 +127,10 @@ static void __init cache_init(void) #ifdef CONFIG_SH_OCRAM /* Turn on OCRAM -- halve the OC */ flags |= CCR_CACHE_ORA; - cpu_data->dcache.sets >>= 1; + current_cpu_data.dcache.sets >>= 1; - cpu_data->dcache.way_size = cpu_data->dcache.sets * - cpu_data->dcache.linesz; + current_cpu_data.dcache.way_size = current_cpu_data.dcache.sets * + current_cpu_data.dcache.linesz; #endif ctrl_outl(flags, CCR); @@ -172,7 +172,7 @@ static void __init dsp_init(void) /* If the DSP bit is still set, this CPU has a DSP */ if (sr & SR_DSP) - cpu_data->flags |= CPU_HAS_DSP; + current_cpu_data.flags |= CPU_HAS_DSP; /* Now that we've determined the DSP status, clear the DSP bit. */ release_dsp(); @@ -204,18 +204,18 @@ asmlinkage void __init sh_cpu_init(void) cache_init(); shm_align_mask = max_t(unsigned long, - cpu_data->dcache.way_size - 1, + current_cpu_data.dcache.way_size - 1, PAGE_SIZE - 1); /* Disable the FPU */ if (fpu_disabled) { printk("FPU Disabled\n"); - cpu_data->flags &= ~CPU_HAS_FPU; + current_cpu_data.flags &= ~CPU_HAS_FPU; disable_fpu(); } /* FPU initialization */ - if ((cpu_data->flags & CPU_HAS_FPU)) { + if ((current_cpu_data.flags & CPU_HAS_FPU)) { clear_thread_flag(TIF_USEDFPU); clear_used_math(); } @@ -233,7 +233,7 @@ asmlinkage void __init sh_cpu_init(void) /* Disable the DSP */ if (dsp_disabled) { printk("DSP Disabled\n"); - cpu_data->flags &= ~CPU_HAS_DSP; + current_cpu_data.flags &= ~CPU_HAS_DSP; release_dsp(); } #endif diff --git a/arch/sh/kernel/cpu/sh2/probe.c b/arch/sh/kernel/cpu/sh2/probe.c index ba527d9b5024..108e81b682ed 100644 --- a/arch/sh/kernel/cpu/sh2/probe.c +++ b/arch/sh/kernel/cpu/sh2/probe.c @@ -18,27 +18,27 @@ int __init detect_cpu_and_cache_system(void) { #if defined(CONFIG_CPU_SUBTYPE_SH7604) - cpu_data->type = CPU_SH7604; - cpu_data->dcache.ways = 4; - cpu_data->dcache.way_incr = (1<<10); - cpu_data->dcache.sets = 64; - cpu_data->dcache.entry_shift = 4; - cpu_data->dcache.linesz = L1_CACHE_BYTES; - cpu_data->dcache.flags = 0; + current_cpu_data.type = CPU_SH7604; + current_cpu_data.dcache.ways = 4; + current_cpu_data.dcache.way_incr = (1<<10); + current_cpu_data.dcache.sets = 64; + current_cpu_data.dcache.entry_shift = 4; + current_cpu_data.dcache.linesz = L1_CACHE_BYTES; + current_cpu_data.dcache.flags = 0; #elif defined(CONFIG_CPU_SUBTYPE_SH7619) - cpu_data->type = CPU_SH7619; - cpu_data->dcache.ways = 4; - cpu_data->dcache.way_incr = (1<<12); - cpu_data->dcache.sets = 256; - cpu_data->dcache.entry_shift = 4; - cpu_data->dcache.linesz = L1_CACHE_BYTES; - cpu_data->dcache.flags = 0; + current_cpu_data.type = CPU_SH7619; + current_cpu_data.dcache.ways = 4; + current_cpu_data.dcache.way_incr = (1<<12); + current_cpu_data.dcache.sets = 256; + current_cpu_data.dcache.entry_shift = 4; + current_cpu_data.dcache.linesz = L1_CACHE_BYTES; + current_cpu_data.dcache.flags = 0; #endif /* * SH-2 doesn't have separate caches */ - cpu_data->dcache.flags |= SH_CACHE_COMBINED; - cpu_data->icache = cpu_data->dcache; + current_cpu_data.dcache.flags |= SH_CACHE_COMBINED; + current_cpu_data.icache = current_cpu_data.dcache; return 0; } diff --git a/arch/sh/kernel/cpu/sh2a/probe.c b/arch/sh/kernel/cpu/sh2a/probe.c index 87c6c0542089..426f6db01fc6 100644 --- a/arch/sh/kernel/cpu/sh2a/probe.c +++ b/arch/sh/kernel/cpu/sh2a/probe.c @@ -17,14 +17,14 @@ int __init detect_cpu_and_cache_system(void) { /* Just SH7206 for now .. */ - cpu_data->type = CPU_SH7206; + current_cpu_data.type = CPU_SH7206; - cpu_data->dcache.ways = 4; - cpu_data->dcache.way_incr = (1 << 11); - cpu_data->dcache.sets = 128; - cpu_data->dcache.entry_shift = 4; - cpu_data->dcache.linesz = L1_CACHE_BYTES; - cpu_data->dcache.flags = 0; + current_cpu_data.dcache.ways = 4; + current_cpu_data.dcache.way_incr = (1 << 11); + current_cpu_data.dcache.sets = 128; + current_cpu_data.dcache.entry_shift = 4; + current_cpu_data.dcache.linesz = L1_CACHE_BYTES; + current_cpu_data.dcache.flags = 0; /* * The icache is the same as the dcache as far as this setup is @@ -32,7 +32,7 @@ int __init detect_cpu_and_cache_system(void) * lacks the U bit that the dcache has, none of this has any bearing * on the cache info. */ - cpu_data->icache = cpu_data->dcache; + current_cpu_data.icache = current_cpu_data.dcache; return 0; } diff --git a/arch/sh/kernel/cpu/sh3/probe.c b/arch/sh/kernel/cpu/sh3/probe.c index e67098836290..821b0ab7b528 100644 --- a/arch/sh/kernel/cpu/sh3/probe.c +++ b/arch/sh/kernel/cpu/sh3/probe.c @@ -50,41 +50,41 @@ int __init detect_cpu_and_cache_system(void) back_to_P1(); - cpu_data->dcache.ways = 4; - cpu_data->dcache.entry_shift = 4; - cpu_data->dcache.linesz = L1_CACHE_BYTES; - cpu_data->dcache.flags = 0; + current_cpu_data.dcache.ways = 4; + current_cpu_data.dcache.entry_shift = 4; + current_cpu_data.dcache.linesz = L1_CACHE_BYTES; + current_cpu_data.dcache.flags = 0; /* * 7709A/7729 has 16K cache (256-entry), while 7702 has only * 2K(direct) 7702 is not supported (yet) */ if (data0 == data1 && data2 == data3) { /* Shadow */ - cpu_data->dcache.way_incr = (1 << 11); - cpu_data->dcache.entry_mask = 0x7f0; - cpu_data->dcache.sets = 128; - cpu_data->type = CPU_SH7708; + current_cpu_data.dcache.way_incr = (1 << 11); + current_cpu_data.dcache.entry_mask = 0x7f0; + current_cpu_data.dcache.sets = 128; + current_cpu_data.type = CPU_SH7708; - cpu_data->flags |= CPU_HAS_MMU_PAGE_ASSOC; + current_cpu_data.flags |= CPU_HAS_MMU_PAGE_ASSOC; } else { /* 7709A or 7729 */ - cpu_data->dcache.way_incr = (1 << 12); - cpu_data->dcache.entry_mask = 0xff0; - cpu_data->dcache.sets = 256; - cpu_data->type = CPU_SH7729; + current_cpu_data.dcache.way_incr = (1 << 12); + current_cpu_data.dcache.entry_mask = 0xff0; + current_cpu_data.dcache.sets = 256; + current_cpu_data.type = CPU_SH7729; #if defined(CONFIG_CPU_SUBTYPE_SH7706) - cpu_data->type = CPU_SH7706; + current_cpu_data.type = CPU_SH7706; #endif #if defined(CONFIG_CPU_SUBTYPE_SH7710) - cpu_data->type = CPU_SH7710; + current_cpu_data.type = CPU_SH7710; #endif #if defined(CONFIG_CPU_SUBTYPE_SH7705) - cpu_data->type = CPU_SH7705; + current_cpu_data.type = CPU_SH7705; #if defined(CONFIG_SH7705_CACHE_32KB) - cpu_data->dcache.way_incr = (1 << 13); - cpu_data->dcache.entry_mask = 0x1ff0; - cpu_data->dcache.sets = 512; + current_cpu_data.dcache.way_incr = (1 << 13); + current_cpu_data.dcache.entry_mask = 0x1ff0; + current_cpu_data.dcache.sets = 512; ctrl_outl(CCR_CACHE_32KB, CCR3); #else ctrl_outl(CCR_CACHE_16KB, CCR3); @@ -95,8 +95,8 @@ int __init detect_cpu_and_cache_system(void) /* * SH-3 doesn't have separate caches */ - cpu_data->dcache.flags |= SH_CACHE_COMBINED; - cpu_data->icache = cpu_data->dcache; + current_cpu_data.dcache.flags |= SH_CACHE_COMBINED; + current_cpu_data.icache = current_cpu_data.dcache; return 0; } diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c index b26e2bc5894d..9d28c88d2f9d 100644 --- a/arch/sh/kernel/cpu/sh4/probe.c +++ b/arch/sh/kernel/cpu/sh4/probe.c @@ -10,11 +10,10 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. */ - #include +#include #include #include -#include int __init detect_cpu_and_cache_system(void) { @@ -36,20 +35,20 @@ int __init detect_cpu_and_cache_system(void) /* * Setup some sane SH-4 defaults for the icache */ - cpu_data->icache.way_incr = (1 << 13); - cpu_data->icache.entry_shift = 5; - cpu_data->icache.sets = 256; - cpu_data->icache.ways = 1; - cpu_data->icache.linesz = L1_CACHE_BYTES; + current_cpu_data.icache.way_incr = (1 << 13); + current_cpu_data.icache.entry_shift = 5; + current_cpu_data.icache.sets = 256; + current_cpu_data.icache.ways = 1; + current_cpu_data.icache.linesz = L1_CACHE_BYTES; /* * And again for the dcache .. */ - cpu_data->dcache.way_incr = (1 << 14); - cpu_data->dcache.entry_shift = 5; - cpu_data->dcache.sets = 512; - cpu_data->dcache.ways = 1; - cpu_data->dcache.linesz = L1_CACHE_BYTES; + current_cpu_data.dcache.way_incr = (1 << 14); + current_cpu_data.dcache.entry_shift = 5; + current_cpu_data.dcache.sets = 512; + current_cpu_data.dcache.ways = 1; + current_cpu_data.dcache.linesz = L1_CACHE_BYTES; /* * Setup some generic flags we can probe @@ -57,16 +56,16 @@ int __init detect_cpu_and_cache_system(void) */ if (((pvr >> 16) & 0xff) == 0x10) { if ((cvr & 0x02000000) == 0) - cpu_data->flags |= CPU_HAS_L2_CACHE; + current_cpu_data.flags |= CPU_HAS_L2_CACHE; if ((cvr & 0x10000000) == 0) - cpu_data->flags |= CPU_HAS_DSP; + current_cpu_data.flags |= CPU_HAS_DSP; - cpu_data->flags |= CPU_HAS_LLSC; + current_cpu_data.flags |= CPU_HAS_LLSC; } /* FPU detection works for everyone */ if ((cvr & 0x20000000) == 1) - cpu_data->flags |= CPU_HAS_FPU; + current_cpu_data.flags |= CPU_HAS_FPU; /* Mask off the upper chip ID */ pvr &= 0xffff; @@ -77,147 +76,151 @@ int __init detect_cpu_and_cache_system(void) */ switch (pvr) { case 0x205: - cpu_data->type = CPU_SH7750; - cpu_data->flags |= CPU_HAS_P2_FLUSH_BUG | CPU_HAS_FPU | + current_cpu_data.type = CPU_SH7750; + current_cpu_data.flags |= CPU_HAS_P2_FLUSH_BUG | CPU_HAS_FPU | CPU_HAS_PERF_COUNTER; break; case 0x206: - cpu_data->type = CPU_SH7750S; - cpu_data->flags |= CPU_HAS_P2_FLUSH_BUG | CPU_HAS_FPU | + current_cpu_data.type = CPU_SH7750S; + current_cpu_data.flags |= CPU_HAS_P2_FLUSH_BUG | CPU_HAS_FPU | CPU_HAS_PERF_COUNTER; break; case 0x1100: - cpu_data->type = CPU_SH7751; - cpu_data->flags |= CPU_HAS_FPU; + current_cpu_data.type = CPU_SH7751; + current_cpu_data.flags |= CPU_HAS_FPU; break; case 0x2000: - cpu_data->type = CPU_SH73180; - cpu_data->icache.ways = 4; - cpu_data->dcache.ways = 4; - cpu_data->flags |= CPU_HAS_LLSC; + current_cpu_data.type = CPU_SH73180; + current_cpu_data.icache.ways = 4; + current_cpu_data.dcache.ways = 4; + current_cpu_data.flags |= CPU_HAS_LLSC; break; case 0x2001: case 0x2004: - cpu_data->type = CPU_SH7770; - cpu_data->icache.ways = 4; - cpu_data->dcache.ways = 4; + current_cpu_data.type = CPU_SH7770; + current_cpu_data.icache.ways = 4; + current_cpu_data.dcache.ways = 4; - cpu_data->flags |= CPU_HAS_FPU | CPU_HAS_LLSC; + current_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_LLSC; break; case 0x2006: case 0x200A: if (prr == 0x61) - cpu_data->type = CPU_SH7781; + current_cpu_data.type = CPU_SH7781; else - cpu_data->type = CPU_SH7780; + current_cpu_data.type = CPU_SH7780; - cpu_data->icache.ways = 4; - cpu_data->dcache.ways = 4; + current_cpu_data.icache.ways = 4; + current_cpu_data.dcache.ways = 4; - cpu_data->flags |= CPU_HAS_FPU | CPU_HAS_PERF_COUNTER | + current_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_PERF_COUNTER | CPU_HAS_LLSC; break; case 0x3000: case 0x3003: case 0x3009: - cpu_data->type = CPU_SH7343; - cpu_data->icache.ways = 4; - cpu_data->dcache.ways = 4; - cpu_data->flags |= CPU_HAS_LLSC; + current_cpu_data.type = CPU_SH7343; + current_cpu_data.icache.ways = 4; + current_cpu_data.dcache.ways = 4; + current_cpu_data.flags |= CPU_HAS_LLSC; break; case 0x3008: if (prr == 0xa0) { - cpu_data->type = CPU_SH7722; - cpu_data->icache.ways = 4; - cpu_data->dcache.ways = 4; - cpu_data->flags |= CPU_HAS_LLSC; + current_cpu_data.type = CPU_SH7722; + current_cpu_data.icache.ways = 4; + current_cpu_data.dcache.ways = 4; + current_cpu_data.flags |= CPU_HAS_LLSC; } break; case 0x8000: - cpu_data->type = CPU_ST40RA; - cpu_data->flags |= CPU_HAS_FPU; + current_cpu_data.type = CPU_ST40RA; + current_cpu_data.flags |= CPU_HAS_FPU; break; case 0x8100: - cpu_data->type = CPU_ST40GX1; - cpu_data->flags |= CPU_HAS_FPU; + current_cpu_data.type = CPU_ST40GX1; + current_cpu_data.flags |= CPU_HAS_FPU; break; case 0x700: - cpu_data->type = CPU_SH4_501; - cpu_data->icache.ways = 2; - cpu_data->dcache.ways = 2; + current_cpu_data.type = CPU_SH4_501; + current_cpu_data.icache.ways = 2; + current_cpu_data.dcache.ways = 2; break; case 0x600: - cpu_data->type = CPU_SH4_202; - cpu_data->icache.ways = 2; - cpu_data->dcache.ways = 2; - cpu_data->flags |= CPU_HAS_FPU; + current_cpu_data.type = CPU_SH4_202; + current_cpu_data.icache.ways = 2; + current_cpu_data.dcache.ways = 2; + current_cpu_data.flags |= CPU_HAS_FPU; break; case 0x500 ... 0x501: switch (prr) { case 0x10: - cpu_data->type = CPU_SH7750R; + current_cpu_data.type = CPU_SH7750R; break; case 0x11: - cpu_data->type = CPU_SH7751R; + current_cpu_data.type = CPU_SH7751R; break; case 0x50 ... 0x5f: - cpu_data->type = CPU_SH7760; + current_cpu_data.type = CPU_SH7760; break; } - cpu_data->icache.ways = 2; - cpu_data->dcache.ways = 2; + current_cpu_data.icache.ways = 2; + current_cpu_data.dcache.ways = 2; - cpu_data->flags |= CPU_HAS_FPU; + current_cpu_data.flags |= CPU_HAS_FPU; break; default: - cpu_data->type = CPU_SH_NONE; + current_cpu_data.type = CPU_SH_NONE; break; } #ifdef CONFIG_SH_DIRECT_MAPPED - cpu_data->icache.ways = 1; - cpu_data->dcache.ways = 1; + current_cpu_data.icache.ways = 1; + current_cpu_data.dcache.ways = 1; +#endif + +#ifdef CONFIG_CPU_HAS_PTEA + current_cpu_data.flags |= CPU_HAS_PTEA; #endif /* * On anything that's not a direct-mapped cache, look to the CVR * for I/D-cache specifics. */ - if (cpu_data->icache.ways > 1) { + if (current_cpu_data.icache.ways > 1) { size = sizes[(cvr >> 20) & 0xf]; - cpu_data->icache.way_incr = (size >> 1); - cpu_data->icache.sets = (size >> 6); + current_cpu_data.icache.way_incr = (size >> 1); + current_cpu_data.icache.sets = (size >> 6); } /* Setup the rest of the I-cache info */ - cpu_data->icache.entry_mask = cpu_data->icache.way_incr - - cpu_data->icache.linesz; + current_cpu_data.icache.entry_mask = current_cpu_data.icache.way_incr - + current_cpu_data.icache.linesz; - cpu_data->icache.way_size = cpu_data->icache.sets * - cpu_data->icache.linesz; + current_cpu_data.icache.way_size = current_cpu_data.icache.sets * + current_cpu_data.icache.linesz; /* And the rest of the D-cache */ - if (cpu_data->dcache.ways > 1) { + if (current_cpu_data.dcache.ways > 1) { size = sizes[(cvr >> 16) & 0xf]; - cpu_data->dcache.way_incr = (size >> 1); - cpu_data->dcache.sets = (size >> 6); + current_cpu_data.dcache.way_incr = (size >> 1); + current_cpu_data.dcache.sets = (size >> 6); } - cpu_data->dcache.entry_mask = cpu_data->dcache.way_incr - - cpu_data->dcache.linesz; + current_cpu_data.dcache.entry_mask = current_cpu_data.dcache.way_incr - + current_cpu_data.dcache.linesz; - cpu_data->dcache.way_size = cpu_data->dcache.sets * - cpu_data->dcache.linesz; + current_cpu_data.dcache.way_size = current_cpu_data.dcache.sets * + current_cpu_data.dcache.linesz; /* * Setup the L2 cache desc * * SH-4A's have an optional PIPT L2. */ - if (cpu_data->flags & CPU_HAS_L2_CACHE) { + if (current_cpu_data.flags & CPU_HAS_L2_CACHE) { /* * Size calculation is much more sensible * than it is for the L1. @@ -228,16 +231,22 @@ int __init detect_cpu_and_cache_system(void) BUG_ON(!size); - cpu_data->scache.way_incr = (1 << 16); - cpu_data->scache.entry_shift = 5; - cpu_data->scache.ways = 4; - cpu_data->scache.linesz = L1_CACHE_BYTES; - cpu_data->scache.entry_mask = - (cpu_data->scache.way_incr - cpu_data->scache.linesz); - cpu_data->scache.sets = size / - (cpu_data->scache.linesz * cpu_data->scache.ways); - cpu_data->scache.way_size = - (cpu_data->scache.sets * cpu_data->scache.linesz); + current_cpu_data.scache.way_incr = (1 << 16); + current_cpu_data.scache.entry_shift = 5; + current_cpu_data.scache.ways = 4; + current_cpu_data.scache.linesz = L1_CACHE_BYTES; + + current_cpu_data.scache.entry_mask = + (current_cpu_data.scache.way_incr - + current_cpu_data.scache.linesz); + + current_cpu_data.scache.sets = size / + (current_cpu_data.scache.linesz * + current_cpu_data.scache.ways); + + current_cpu_data.scache.way_size = + (current_cpu_data.scache.sets * + current_cpu_data.scache.linesz); } return 0; diff --git a/arch/sh/kernel/process.c b/arch/sh/kernel/process.c index 0298f0faa6e6..9d6a438b3eaf 100644 --- a/arch/sh/kernel/process.c +++ b/arch/sh/kernel/process.c @@ -293,13 +293,14 @@ static void ubc_set_tracing(int asid, unsigned long pc) #ifdef CONFIG_MMU /* We don't have any ASID settings for the SH-2! */ - if (cpu_data->type != CPU_SH7604) + if (current_cpu_data.type != CPU_SH7604) ctrl_outb(asid, UBC_BASRA); #endif ctrl_outl(0, UBC_BAMRA); - if (cpu_data->type == CPU_SH7729 || cpu_data->type == CPU_SH7710) { + if (current_cpu_data.type == CPU_SH7729 || + current_cpu_data.type == CPU_SH7710) { ctrl_outw(BBR_INST | BBR_READ | BBR_CPU, UBC_BBRA); ctrl_outl(BRCR_PCBA | BRCR_PCTE, UBC_BRCR); } else { diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index d6b817aa568f..98802ab28211 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -1,14 +1,11 @@ /* - * linux/arch/sh/kernel/setup.c + * arch/sh/kernel/setup.c * - * Copyright (C) 1999 Niibe Yutaka - * Copyright (C) 2002, 2003 Paul Mundt - */ - -/* * This file handles the architecture-dependent parts of initialization + * + * Copyright (C) 1999 Niibe Yutaka + * Copyright (C) 2002 - 2006 Paul Mundt */ - #include #include #include @@ -395,9 +392,9 @@ static const char *cpu_name[] = { [CPU_SH_NONE] = "Unknown" }; -const char *get_cpu_subtype(void) +const char *get_cpu_subtype(struct sh_cpuinfo *c) { - return cpu_name[boot_cpu_data.type]; + return cpu_name[c->type]; } #ifdef CONFIG_PROC_FS @@ -407,19 +404,19 @@ static const char *cpu_flags[] = { "ptea", "llsc", "l2", NULL }; -static void show_cpuflags(struct seq_file *m) +static void show_cpuflags(struct seq_file *m, struct sh_cpuinfo *c) { unsigned long i; seq_printf(m, "cpu flags\t:"); - if (!cpu_data->flags) { + if (!c->flags) { seq_printf(m, " %s\n", cpu_flags[0]); return; } for (i = 0; cpu_flags[i]; i++) - if ((cpu_data->flags & (1 << i))) + if ((c->flags & (1 << i))) seq_printf(m, " %s", cpu_flags[i+1]); seq_printf(m, "\n"); @@ -441,16 +438,20 @@ static void show_cacheinfo(struct seq_file *m, const char *type, */ static int show_cpuinfo(struct seq_file *m, void *v) { - unsigned int cpu = smp_processor_id(); + struct sh_cpuinfo *c = v; + unsigned int cpu = c - cpu_data; + + if (!cpu_online(cpu)) + return 0; - if (!cpu && cpu_online(cpu)) + if (cpu == 0) seq_printf(m, "machine\t\t: %s\n", get_system_type()); seq_printf(m, "processor\t: %d\n", cpu); seq_printf(m, "cpu family\t: %s\n", init_utsname()->machine); - seq_printf(m, "cpu type\t: %s\n", get_cpu_subtype()); + seq_printf(m, "cpu type\t: %s\n", get_cpu_subtype(c)); - show_cpuflags(m); + show_cpuflags(m, c); seq_printf(m, "cache type\t: "); @@ -459,22 +460,22 @@ static int show_cpuinfo(struct seq_file *m, void *v) * unified cache on the SH-2 and SH-3, as well as the harvard * style cache on the SH-4. */ - if (boot_cpu_data.icache.flags & SH_CACHE_COMBINED) { + if (c->icache.flags & SH_CACHE_COMBINED) { seq_printf(m, "unified\n"); - show_cacheinfo(m, "cache", boot_cpu_data.icache); + show_cacheinfo(m, "cache", c->icache); } else { seq_printf(m, "split (harvard)\n"); - show_cacheinfo(m, "icache", boot_cpu_data.icache); - show_cacheinfo(m, "dcache", boot_cpu_data.dcache); + show_cacheinfo(m, "icache", c->icache); + show_cacheinfo(m, "dcache", c->dcache); } /* Optional secondary cache */ - if (boot_cpu_data.flags & CPU_HAS_L2_CACHE) - show_cacheinfo(m, "scache", boot_cpu_data.scache); + if (c->flags & CPU_HAS_L2_CACHE) + show_cacheinfo(m, "scache", c->scache); seq_printf(m, "bogomips\t: %lu.%02lu\n", - boot_cpu_data.loops_per_jiffy/(500000/HZ), - (boot_cpu_data.loops_per_jiffy/(5000/HZ)) % 100); + c->loops_per_jiffy/(500000/HZ), + (c->loops_per_jiffy/(5000/HZ)) % 100); return show_clocks(m); } diff --git a/arch/sh/kernel/signal.c b/arch/sh/kernel/signal.c index 379c88bf5d9a..32f10a03fbb5 100644 --- a/arch/sh/kernel/signal.c +++ b/arch/sh/kernel/signal.c @@ -127,7 +127,7 @@ static inline int restore_sigcontext_fpu(struct sigcontext __user *sc) { struct task_struct *tsk = current; - if (!(cpu_data->flags & CPU_HAS_FPU)) + if (!(current_cpu_data.flags & CPU_HAS_FPU)) return 0; set_used_math(); @@ -140,7 +140,7 @@ static inline int save_sigcontext_fpu(struct sigcontext __user *sc, { struct task_struct *tsk = current; - if (!(cpu_data->flags & CPU_HAS_FPU)) + if (!(current_cpu_data.flags & CPU_HAS_FPU)) return 0; if (!used_math()) { @@ -181,7 +181,7 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, int *r0_p #undef COPY #ifdef CONFIG_SH_FPU - if (cpu_data->flags & CPU_HAS_FPU) { + if (current_cpu_data.flags & CPU_HAS_FPU) { int owned_fp; struct task_struct *tsk = current; diff --git a/arch/sh/kernel/traps.c b/arch/sh/kernel/traps.c index e91224faf6c4..e9f168f60f95 100644 --- a/arch/sh/kernel/traps.c +++ b/arch/sh/kernel/traps.c @@ -641,7 +641,7 @@ int is_dsp_inst(struct pt_regs *regs) * Safe guard if DSP mode is already enabled or we're lacking * the DSP altogether. */ - if (!(cpu_data->flags & CPU_HAS_DSP) || (regs->sr & SR_DSP)) + if (!(current_cpu_data.flags & CPU_HAS_DSP) || (regs->sr & SR_DSP)) return 0; get_user(inst, ((unsigned short *) regs->pc)); diff --git a/arch/sh/mm/cache-debugfs.c b/arch/sh/mm/cache-debugfs.c index 909dcfa8c8c6..de6d2c9aa477 100644 --- a/arch/sh/mm/cache-debugfs.c +++ b/arch/sh/mm/cache-debugfs.c @@ -46,10 +46,10 @@ static int cache_seq_show(struct seq_file *file, void *iter) if (cache_type == CACHE_TYPE_DCACHE) { base = CACHE_OC_ADDRESS_ARRAY; - cache = &cpu_data->dcache; + cache = ¤t_cpu_data.dcache; } else { base = CACHE_IC_ADDRESS_ARRAY; - cache = &cpu_data->icache; + cache = ¤t_cpu_data.icache; } /* diff --git a/arch/sh/mm/cache-sh3.c b/arch/sh/mm/cache-sh3.c index 838731fc608d..6d1dbec08ad4 100644 --- a/arch/sh/mm/cache-sh3.c +++ b/arch/sh/mm/cache-sh3.c @@ -44,11 +44,11 @@ void __flush_wback_region(void *start, int size) for (v = begin; v < end; v+=L1_CACHE_BYTES) { unsigned long addrstart = CACHE_OC_ADDRESS_ARRAY; - for (j = 0; j < cpu_data->dcache.ways; j++) { + for (j = 0; j < current_cpu_data.dcache.ways; j++) { unsigned long data, addr, p; p = __pa(v); - addr = addrstart | (v & cpu_data->dcache.entry_mask); + addr = addrstart | (v & current_cpu_data.dcache.entry_mask); local_irq_save(flags); data = ctrl_inl(addr); @@ -60,7 +60,7 @@ void __flush_wback_region(void *start, int size) break; } local_irq_restore(flags); - addrstart += cpu_data->dcache.way_incr; + addrstart += current_cpu_data.dcache.way_incr; } } } @@ -85,7 +85,7 @@ void __flush_purge_region(void *start, int size) data = (v & 0xfffffc00); /* _Virtual_ address, ~U, ~V */ addr = CACHE_OC_ADDRESS_ARRAY | - (v & cpu_data->dcache.entry_mask) | SH_CACHE_ASSOC; + (v & current_cpu_data.dcache.entry_mask) | SH_CACHE_ASSOC; ctrl_outl(data, addr); } } diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c index 72bb48773337..e0cd4b7f4aeb 100644 --- a/arch/sh/mm/cache-sh4.c +++ b/arch/sh/mm/cache-sh4.c @@ -54,21 +54,21 @@ static void __init emit_cache_params(void) ctrl_inl(CCN_CVR), ctrl_inl(CCN_PRR)); printk("I-cache : n_ways=%d n_sets=%d way_incr=%d\n", - cpu_data->icache.ways, - cpu_data->icache.sets, - cpu_data->icache.way_incr); + current_cpu_data.icache.ways, + current_cpu_data.icache.sets, + current_cpu_data.icache.way_incr); printk("I-cache : entry_mask=0x%08x alias_mask=0x%08x n_aliases=%d\n", - cpu_data->icache.entry_mask, - cpu_data->icache.alias_mask, - cpu_data->icache.n_aliases); + current_cpu_data.icache.entry_mask, + current_cpu_data.icache.alias_mask, + current_cpu_data.icache.n_aliases); printk("D-cache : n_ways=%d n_sets=%d way_incr=%d\n", - cpu_data->dcache.ways, - cpu_data->dcache.sets, - cpu_data->dcache.way_incr); + current_cpu_data.dcache.ways, + current_cpu_data.dcache.sets, + current_cpu_data.dcache.way_incr); printk("D-cache : entry_mask=0x%08x alias_mask=0x%08x n_aliases=%d\n", - cpu_data->dcache.entry_mask, - cpu_data->dcache.alias_mask, - cpu_data->dcache.n_aliases); + current_cpu_data.dcache.entry_mask, + current_cpu_data.dcache.alias_mask, + current_cpu_data.dcache.n_aliases); if (!__flush_dcache_segment_fn) panic("unknown number of cache ways\n"); @@ -87,10 +87,10 @@ void __init p3_cache_init(void) { int i; - compute_alias(&cpu_data->icache); - compute_alias(&cpu_data->dcache); + compute_alias(¤t_cpu_data.icache); + compute_alias(¤t_cpu_data.dcache); - switch (cpu_data->dcache.ways) { + switch (current_cpu_data.dcache.ways) { case 1: __flush_dcache_segment_fn = __flush_dcache_segment_1way; break; @@ -110,7 +110,7 @@ void __init p3_cache_init(void) if (ioremap_page_range(P3SEG, P3SEG + (PAGE_SIZE * 4), 0, PAGE_KERNEL)) panic("%s failed.", __FUNCTION__); - for (i = 0; i < cpu_data->dcache.n_aliases; i++) + for (i = 0; i < current_cpu_data.dcache.n_aliases; i++) mutex_init(&p3map_mutex[i]); } @@ -200,13 +200,14 @@ void flush_cache_sigtramp(unsigned long addr) : /* no output */ : "m" (__m(v))); - index = CACHE_IC_ADDRESS_ARRAY | (v & cpu_data->icache.entry_mask); + index = CACHE_IC_ADDRESS_ARRAY | + (v & current_cpu_data.icache.entry_mask); local_irq_save(flags); jump_to_P2(); - for (i = 0; i < cpu_data->icache.ways; - i++, index += cpu_data->icache.way_incr) + for (i = 0; i < current_cpu_data.icache.ways; + i++, index += current_cpu_data.icache.way_incr) ctrl_outl(0, index); /* Clear out Valid-bit */ back_to_P1(); @@ -223,7 +224,7 @@ static inline void flush_cache_4096(unsigned long start, * All types of SH-4 require PC to be in P2 to operate on the I-cache. * Some types of SH-4 require PC to be in P2 to operate on the D-cache. */ - if ((cpu_data->flags & CPU_HAS_P2_FLUSH_BUG) || + if ((current_cpu_data.flags & CPU_HAS_P2_FLUSH_BUG) || (start < CACHE_OC_ADDRESS_ARRAY)) exec_offset = 0x20000000; @@ -255,7 +256,7 @@ void flush_dcache_page(struct page *page) int i, n; /* Loop all the D-cache */ - n = cpu_data->dcache.n_aliases; + n = current_cpu_data.dcache.n_aliases; for (i = 0; i < n; i++, addr += 4096) flush_cache_4096(addr, phys); } @@ -287,7 +288,7 @@ static inline void flush_icache_all(void) void flush_dcache_all(void) { - (*__flush_dcache_segment_fn)(0UL, cpu_data->dcache.way_size); + (*__flush_dcache_segment_fn)(0UL, current_cpu_data.dcache.way_size); wmb(); } @@ -301,8 +302,8 @@ static void __flush_cache_mm(struct mm_struct *mm, unsigned long start, unsigned long end) { unsigned long d = 0, p = start & PAGE_MASK; - unsigned long alias_mask = cpu_data->dcache.alias_mask; - unsigned long n_aliases = cpu_data->dcache.n_aliases; + unsigned long alias_mask = current_cpu_data.dcache.alias_mask; + unsigned long n_aliases = current_cpu_data.dcache.n_aliases; unsigned long select_bit; unsigned long all_aliases_mask; unsigned long addr_offset; @@ -389,7 +390,7 @@ void flush_cache_mm(struct mm_struct *mm) * If cache is only 4k-per-way, there are never any 'aliases'. Since * the cache is physically tagged, the data can just be left in there. */ - if (cpu_data->dcache.n_aliases == 0) + if (current_cpu_data.dcache.n_aliases == 0) return; /* @@ -426,7 +427,7 @@ void flush_cache_page(struct vm_area_struct *vma, unsigned long address, unsigned long phys = pfn << PAGE_SHIFT; unsigned int alias_mask; - alias_mask = cpu_data->dcache.alias_mask; + alias_mask = current_cpu_data.dcache.alias_mask; /* We only need to flush D-cache when we have alias */ if ((address^phys) & alias_mask) { @@ -440,7 +441,7 @@ void flush_cache_page(struct vm_area_struct *vma, unsigned long address, phys); } - alias_mask = cpu_data->icache.alias_mask; + alias_mask = current_cpu_data.icache.alias_mask; if (vma->vm_flags & VM_EXEC) { /* * Evict entries from the portion of the cache from which code @@ -472,7 +473,7 @@ void flush_cache_range(struct vm_area_struct *vma, unsigned long start, * If cache is only 4k-per-way, there are never any 'aliases'. Since * the cache is physically tagged, the data can just be left in there. */ - if (cpu_data->dcache.n_aliases == 0) + if (current_cpu_data.dcache.n_aliases == 0) return; /* @@ -533,7 +534,7 @@ static void __flush_cache_4096(unsigned long addr, unsigned long phys, unsigned long a, ea, p; unsigned long temp_pc; - dcache = &cpu_data->dcache; + dcache = ¤t_cpu_data.dcache; /* Write this way for better assembly. */ way_count = dcache->ways; way_incr = dcache->way_incr; @@ -608,7 +609,7 @@ static void __flush_dcache_segment_1way(unsigned long start, base_addr = ((base_addr >> 16) << 16); base_addr |= start; - dcache = &cpu_data->dcache; + dcache = ¤t_cpu_data.dcache; linesz = dcache->linesz; way_incr = dcache->way_incr; way_size = dcache->way_size; @@ -650,7 +651,7 @@ static void __flush_dcache_segment_2way(unsigned long start, base_addr = ((base_addr >> 16) << 16); base_addr |= start; - dcache = &cpu_data->dcache; + dcache = ¤t_cpu_data.dcache; linesz = dcache->linesz; way_incr = dcache->way_incr; way_size = dcache->way_size; @@ -709,7 +710,7 @@ static void __flush_dcache_segment_4way(unsigned long start, base_addr = ((base_addr >> 16) << 16); base_addr |= start; - dcache = &cpu_data->dcache; + dcache = ¤t_cpu_data.dcache; linesz = dcache->linesz; way_incr = dcache->way_incr; way_size = dcache->way_size; diff --git a/arch/sh/mm/cache-sh7705.c b/arch/sh/mm/cache-sh7705.c index 2808b580d984..31f8deb7a158 100644 --- a/arch/sh/mm/cache-sh7705.c +++ b/arch/sh/mm/cache-sh7705.c @@ -32,9 +32,9 @@ static inline void cache_wback_all(void) { unsigned long ways, waysize, addrstart; - ways = cpu_data->dcache.ways; - waysize = cpu_data->dcache.sets; - waysize <<= cpu_data->dcache.entry_shift; + ways = current_cpu_data.dcache.ways; + waysize = current_cpu_data.dcache.sets; + waysize <<= current_cpu_data.dcache.entry_shift; addrstart = CACHE_OC_ADDRESS_ARRAY; @@ -43,7 +43,7 @@ static inline void cache_wback_all(void) for (addr = addrstart; addr < addrstart + waysize; - addr += cpu_data->dcache.linesz) { + addr += current_cpu_data.dcache.linesz) { unsigned long data; int v = SH_CACHE_UPDATED | SH_CACHE_VALID; @@ -53,7 +53,7 @@ static inline void cache_wback_all(void) ctrl_outl(data & ~v, addr); } - addrstart += cpu_data->dcache.way_incr; + addrstart += current_cpu_data.dcache.way_incr; } while (--ways); } @@ -93,9 +93,9 @@ static void __flush_dcache_page(unsigned long phys) local_irq_save(flags); jump_to_P2(); - ways = cpu_data->dcache.ways; - waysize = cpu_data->dcache.sets; - waysize <<= cpu_data->dcache.entry_shift; + ways = current_cpu_data.dcache.ways; + waysize = current_cpu_data.dcache.sets; + waysize <<= current_cpu_data.dcache.entry_shift; addrstart = CACHE_OC_ADDRESS_ARRAY; @@ -104,7 +104,7 @@ static void __flush_dcache_page(unsigned long phys) for (addr = addrstart; addr < addrstart + waysize; - addr += cpu_data->dcache.linesz) { + addr += current_cpu_data.dcache.linesz) { unsigned long data; data = ctrl_inl(addr) & (0x1ffffC00 | SH_CACHE_VALID); @@ -114,7 +114,7 @@ static void __flush_dcache_page(unsigned long phys) } } - addrstart += cpu_data->dcache.way_incr; + addrstart += current_cpu_data.dcache.way_incr; } while (--ways); back_to_P1(); diff --git a/arch/sh/mm/pg-sh4.c b/arch/sh/mm/pg-sh4.c index cfc323551741..b529d809dd4b 100644 --- a/arch/sh/mm/pg-sh4.c +++ b/arch/sh/mm/pg-sh4.c @@ -13,7 +13,7 @@ extern struct mutex p3map_mutex[]; -#define CACHE_ALIAS (cpu_data->dcache.alias_mask) +#define CACHE_ALIAS (current_cpu_data.dcache.alias_mask) /* * clear_user_page diff --git a/arch/sh/mm/pg-sh7705.c b/arch/sh/mm/pg-sh7705.c index b052d0fee827..887ab9d18ccd 100644 --- a/arch/sh/mm/pg-sh7705.c +++ b/arch/sh/mm/pg-sh7705.c @@ -43,13 +43,13 @@ static inline void __flush_purge_virtual_region(void *p1, void *virt, int size) p = __pa(p1_begin); - ways = cpu_data->dcache.ways; + ways = current_cpu_data.dcache.ways; addr = CACHE_OC_ADDRESS_ARRAY; do { unsigned long data; - addr |= (v & cpu_data->dcache.entry_mask); + addr |= (v & current_cpu_data.dcache.entry_mask); data = ctrl_inl(addr); if ((data & CACHE_PHYSADDR_MASK) == @@ -58,7 +58,7 @@ static inline void __flush_purge_virtual_region(void *p1, void *virt, int size) ctrl_outl(data, addr); } - addr += cpu_data->dcache.way_incr; + addr += current_cpu_data.dcache.way_incr; } while (--ways); p1_begin += L1_CACHE_BYTES; diff --git a/arch/sh/mm/tlb-sh3.c b/arch/sh/mm/tlb-sh3.c index 16627069c536..598c998dba5c 100644 --- a/arch/sh/mm/tlb-sh3.c +++ b/arch/sh/mm/tlb-sh3.c @@ -26,7 +26,7 @@ void __flush_tlb_page(unsigned long asid, unsigned long page) addr = MMU_TLB_ADDRESS_ARRAY | (page & 0x1F000); data = (page & 0xfffe0000) | asid; /* VALID bit is off */ - if ((cpu_data->flags & CPU_HAS_MMU_PAGE_ASSOC)) { + if ((current_cpu_data.flags & CPU_HAS_MMU_PAGE_ASSOC)) { addr |= MMU_PAGE_ASSOC_BIT; ways = 1; /* we already know the way .. */ } diff --git a/arch/sh/oprofile/op_model_sh7750.c b/arch/sh/oprofile/op_model_sh7750.c index 0104e44bc76a..ebee7e24ede9 100644 --- a/arch/sh/oprofile/op_model_sh7750.c +++ b/arch/sh/oprofile/op_model_sh7750.c @@ -259,7 +259,7 @@ static struct oprofile_operations sh7750_perf_counter_ops = { int __init oprofile_arch_init(struct oprofile_operations **ops) { - if (!(cpu_data->flags & CPU_HAS_PERF_COUNTER)) + if (!(current_cpu_data.flags & CPU_HAS_PERF_COUNTER)) return -ENODEV; sh7750_perf_counter_ops.cpu_type = (char *)get_cpu_subtype(); -- cgit v1.2.3 From ea9af69481730e3d712104dfd549ba6c8ddd29f1 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 25 Dec 2006 19:28:54 +0900 Subject: sh: Local TLB flushing variants for SMP prep. Rename the existing flush routines to local_ variants for use by the IPI-backed global flush routines on SMP. Signed-off-by: Paul Mundt --- arch/sh/kernel/sh_ksyms.c | 1 - arch/sh/mm/init.c | 2 +- arch/sh/mm/pg-sh4.c | 4 ++-- arch/sh/mm/tlb-flush.c | 20 ++++++++++---------- arch/sh/mm/tlb-nommu.c | 19 ++++++------------- arch/sh/mm/tlb-sh3.c | 2 +- arch/sh/mm/tlb-sh4.c | 2 +- 7 files changed, 21 insertions(+), 29 deletions(-) (limited to 'arch') diff --git a/arch/sh/kernel/sh_ksyms.c b/arch/sh/kernel/sh_ksyms.c index e6106239a0fe..fe1b276c97c6 100644 --- a/arch/sh/kernel/sh_ksyms.c +++ b/arch/sh/kernel/sh_ksyms.c @@ -105,7 +105,6 @@ EXPORT_SYMBOL(__flush_purge_region); EXPORT_SYMBOL(clear_user_page); #endif -EXPORT_SYMBOL(flush_tlb_page); EXPORT_SYMBOL(__down_trylock); #ifdef CONFIG_SMP diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c index d172065182fb..ae957a932375 100644 --- a/arch/sh/mm/init.c +++ b/arch/sh/mm/init.c @@ -106,7 +106,7 @@ static void set_pte_phys(unsigned long addr, unsigned long phys, pgprot_t prot) set_pte(pte, pfn_pte(phys >> PAGE_SHIFT, prot)); - __flush_tlb_page(get_asid(), addr); + flush_tlb_one(get_asid(), addr); } /* diff --git a/arch/sh/mm/pg-sh4.c b/arch/sh/mm/pg-sh4.c index b529d809dd4b..969efeceb928 100644 --- a/arch/sh/mm/pg-sh4.c +++ b/arch/sh/mm/pg-sh4.c @@ -39,7 +39,7 @@ void clear_user_page(void *to, unsigned long address, struct page *page) mutex_lock(&p3map_mutex[(address & CACHE_ALIAS)>>12]); set_pte(pte, entry); local_irq_save(flags); - __flush_tlb_page(get_asid(), p3_addr); + flush_tlb_one(get_asid(), p3_addr); local_irq_restore(flags); update_mmu_cache(NULL, p3_addr, entry); __clear_user_page((void *)p3_addr, to); @@ -74,7 +74,7 @@ void copy_user_page(void *to, void *from, unsigned long address, mutex_lock(&p3map_mutex[(address & CACHE_ALIAS)>>12]); set_pte(pte, entry); local_irq_save(flags); - __flush_tlb_page(get_asid(), p3_addr); + flush_tlb_one(get_asid(), p3_addr); local_irq_restore(flags); update_mmu_cache(NULL, p3_addr, entry); __copy_user_page((void *)p3_addr, from, to); diff --git a/arch/sh/mm/tlb-flush.c b/arch/sh/mm/tlb-flush.c index b829c17c1d17..dcaf98e82be8 100644 --- a/arch/sh/mm/tlb-flush.c +++ b/arch/sh/mm/tlb-flush.c @@ -14,7 +14,7 @@ #include #include -void flush_tlb_page(struct vm_area_struct *vma, unsigned long page) +void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page) { unsigned int cpu = smp_processor_id(); @@ -31,15 +31,15 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long page) saved_asid = get_asid(); set_asid(asid); } - __flush_tlb_page(asid, page); + flush_tlb_one(asid, page); if (saved_asid != MMU_NO_ASID) set_asid(saved_asid); local_irq_restore(flags); } } -void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, - unsigned long end) +void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, + unsigned long end) { struct mm_struct *mm = vma->vm_mm; unsigned int cpu = smp_processor_id(); @@ -67,7 +67,7 @@ void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, set_asid(asid); } while (start < end) { - __flush_tlb_page(asid, start); + flush_tlb_one(asid, start); start += PAGE_SIZE; } if (saved_asid != MMU_NO_ASID) @@ -77,7 +77,7 @@ void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, } } -void flush_tlb_kernel_range(unsigned long start, unsigned long end) +void local_flush_tlb_kernel_range(unsigned long start, unsigned long end) { unsigned int cpu = smp_processor_id(); unsigned long flags; @@ -86,7 +86,7 @@ void flush_tlb_kernel_range(unsigned long start, unsigned long end) local_irq_save(flags); size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT; if (size > (MMU_NTLB_ENTRIES/4)) { /* Too many TLB to flush */ - flush_tlb_all(); + local_flush_tlb_all(); } else { unsigned long asid; unsigned long saved_asid = get_asid(); @@ -97,7 +97,7 @@ void flush_tlb_kernel_range(unsigned long start, unsigned long end) end &= PAGE_MASK; set_asid(asid); while (start < end) { - __flush_tlb_page(asid, start); + flush_tlb_one(asid, start); start += PAGE_SIZE; } set_asid(saved_asid); @@ -105,7 +105,7 @@ void flush_tlb_kernel_range(unsigned long start, unsigned long end) local_irq_restore(flags); } -void flush_tlb_mm(struct mm_struct *mm) +void local_flush_tlb_mm(struct mm_struct *mm) { unsigned int cpu = smp_processor_id(); @@ -122,7 +122,7 @@ void flush_tlb_mm(struct mm_struct *mm) } } -void flush_tlb_all(void) +void local_flush_tlb_all(void) { unsigned long flags, status; diff --git a/arch/sh/mm/tlb-nommu.c b/arch/sh/mm/tlb-nommu.c index e55cfea01092..1ccca7c0532e 100644 --- a/arch/sh/mm/tlb-nommu.c +++ b/arch/sh/mm/tlb-nommu.c @@ -13,39 +13,33 @@ /* * Nothing too terribly exciting here .. */ - -void flush_tlb(void) -{ - BUG(); -} - -void flush_tlb_all(void) +void local_flush_tlb_all(void) { BUG(); } -void flush_tlb_mm(struct mm_struct *mm) +void local_flush_tlb_mm(struct mm_struct *mm) { BUG(); } -void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, +void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end) { BUG(); } -void flush_tlb_page(struct vm_area_struct *vma, unsigned long page) +void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page) { BUG(); } -void __flush_tlb_page(unsigned long asid, unsigned long page) +void local_flush_tlb_one(unsigned long asid, unsigned long page) { BUG(); } -void flush_tlb_kernel_range(unsigned long start, unsigned long end) +void local_flush_tlb_kernel_range(unsigned long start, unsigned long end) { BUG(); } @@ -55,4 +49,3 @@ void update_mmu_cache(struct vm_area_struct * vma, { BUG(); } - diff --git a/arch/sh/mm/tlb-sh3.c b/arch/sh/mm/tlb-sh3.c index 598c998dba5c..e5e76eb7ee09 100644 --- a/arch/sh/mm/tlb-sh3.c +++ b/arch/sh/mm/tlb-sh3.c @@ -12,7 +12,7 @@ #include #include -void __flush_tlb_page(unsigned long asid, unsigned long page) +void local_flush_tlb_one(unsigned long asid, unsigned long page) { unsigned long addr, data; int i, ways = MMU_NTLB_WAYS; diff --git a/arch/sh/mm/tlb-sh4.c b/arch/sh/mm/tlb-sh4.c index 758d8dec622b..221e7095473d 100644 --- a/arch/sh/mm/tlb-sh4.c +++ b/arch/sh/mm/tlb-sh4.c @@ -12,7 +12,7 @@ #include #include -void __flush_tlb_page(unsigned long asid, unsigned long page) +void local_flush_tlb_one(unsigned long asid, unsigned long page) { unsigned long addr, data; -- cgit v1.2.3 From 0072032d7babc4347556c1863919f3c532d9cf5b Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 25 Dec 2006 19:37:56 +0900 Subject: sh: Switch to local TLB flush variants in additional callsites. Convert some of the global flush users over to using the local variants that don't need to use the global routines. Signed-off-by: Paul Mundt --- arch/sh/mm/tlb-flush.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/sh/mm/tlb-flush.c b/arch/sh/mm/tlb-flush.c index dcaf98e82be8..d2f7b4a2eb05 100644 --- a/arch/sh/mm/tlb-flush.c +++ b/arch/sh/mm/tlb-flush.c @@ -31,7 +31,7 @@ void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page) saved_asid = get_asid(); set_asid(asid); } - flush_tlb_one(asid, page); + local_flush_tlb_one(asid, page); if (saved_asid != MMU_NO_ASID) set_asid(saved_asid); local_irq_restore(flags); @@ -67,7 +67,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, set_asid(asid); } while (start < end) { - flush_tlb_one(asid, start); + local_flush_tlb_one(asid, start); start += PAGE_SIZE; } if (saved_asid != MMU_NO_ASID) @@ -97,7 +97,7 @@ void local_flush_tlb_kernel_range(unsigned long start, unsigned long end) end &= PAGE_MASK; set_asid(asid); while (start < end) { - flush_tlb_one(asid, start); + local_flush_tlb_one(asid, start); start += PAGE_SIZE; } set_asid(saved_asid); -- cgit v1.2.3 From 5904539b7f21ae97f16278ea4bfb81fd19749e1a Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 7 Feb 2007 18:35:39 +0900 Subject: sh: dcache write-back for R7780RP PIO. Signed-off-by: Paul Mundt --- arch/sh/boards/renesas/r7780rp/io.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/sh/boards/renesas/r7780rp/io.c b/arch/sh/boards/renesas/r7780rp/io.c index 311ccccba718..369cbf1cd471 100644 --- a/arch/sh/boards/renesas/r7780rp/io.c +++ b/arch/sh/boards/renesas/r7780rp/io.c @@ -214,6 +214,8 @@ void r7780rp_insw(unsigned long port, void *dst, unsigned long count) while (count--) *buf++ = *p; + + flush_dcache_all(); } void r7780rp_insl(unsigned long port, void *dst, unsigned long count) @@ -271,6 +273,8 @@ void r7780rp_outsw(unsigned long port, const void *src, unsigned long count) while (count--) *p = *buf++; + + flush_dcache_all(); } void r7780rp_outsl(unsigned long port, const void *src, unsigned long count) -- cgit v1.2.3 From b37814352d2c4b83e0636e57f997c3a79d33be05 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 7 Feb 2007 19:11:35 +0900 Subject: sh: Fix syscall numbering breakage. We accidentally broke the inotify syscalls, fix those up again. Signed-off-by: Paul Mundt --- arch/sh/kernel/syscalls.S | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/sh/kernel/syscalls.S b/arch/sh/kernel/syscalls.S index ca81976e9e34..38fc8cd3ea3a 100644 --- a/arch/sh/kernel/syscalls.S +++ b/arch/sh/kernel/syscalls.S @@ -319,15 +319,15 @@ ENTRY(sys_call_table) .long sys_mq_getsetattr .long sys_kexec_load .long sys_waitid - .long sys_ni_syscall /* 285 */ - .long sys_add_key + .long sys_add_key /* 285 */ .long sys_request_key .long sys_keyctl .long sys_ioprio_set - .long sys_ioprio_get /* 290 */ - .long sys_inotify_init + .long sys_ioprio_get + .long sys_inotify_init /* 290 */ .long sys_inotify_add_watch .long sys_inotify_rm_watch + .long sys_ni_syscall .long sys_migrate_pages .long sys_openat /* 295 */ .long sys_mkdirat -- cgit v1.2.3 From ca43ecbf6e5c7216152e5a388f2ecdd87e07a293 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 7 Feb 2007 21:27:50 +0900 Subject: sh: Kill dead/unused ISA code from __ioremap(). Signed-off-by: Paul Mundt --- arch/sh/mm/ioremap.c | 6 ------ 1 file changed, 6 deletions(-) (limited to 'arch') diff --git a/arch/sh/mm/ioremap.c b/arch/sh/mm/ioremap.c index 90b494a0cf45..be03d74e99cb 100644 --- a/arch/sh/mm/ioremap.c +++ b/arch/sh/mm/ioremap.c @@ -44,12 +44,6 @@ void __iomem *__ioremap(unsigned long phys_addr, unsigned long size, if (!size || last_addr < phys_addr) return NULL; - /* - * Don't remap the low PCI/ISA area, it's always mapped.. - */ - if (phys_addr >= 0xA0000 && last_addr < 0x100000) - return (void __iomem *)phys_to_virt(phys_addr); - /* * If we're on an SH7751 or SH7780 PCI controller, PCI memory is * mapped at the end of the address space (typically 0xfd000000) -- cgit v1.2.3 From 8ce0a7df6e6117d8814e976d4b7ce6a6b2c9cf93 Mon Sep 17 00:00:00 2001 From: Becky Bruce Date: Mon, 12 Feb 2007 17:43:46 -0600 Subject: [POWERPC] 85xx: Don't write reserved values to MAS1[TSIZE] Some of the current tlbwe instructions early on in head_fsl_booke.S take advantage of unarchitected behavior that allows the writing of reserved values to the TSIZE field. This patch corrects that, as well as an error where an uninitialized (by linux) value was written into a MAS register and used for a tlbwe. Correct this for both arch/ppc and arch/powerpc. Signed-off-by: Becky Bruce Signed-off-by: Kumar Gala --- arch/powerpc/kernel/head_fsl_booke.S | 5 ++++- arch/ppc/kernel/head_fsl_booke.S | 5 ++++- 2 files changed, 8 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S index 66877bdfe0b7..54f40d95cdb9 100644 --- a/arch/powerpc/kernel/head_fsl_booke.S +++ b/arch/powerpc/kernel/head_fsl_booke.S @@ -206,7 +206,8 @@ skpinv: addi r6,r6,1 /* Increment */ rlwimi r7,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */ mtspr SPRN_MAS0,r7 tlbre - li r6,0 + mfspr r6,SPRN_MAS1 + rlwinm r6,r6,0,2,0 /* clear IPROT */ mtspr SPRN_MAS1,r6 tlbwe /* Invalidate TLB1 */ @@ -248,6 +249,8 @@ skpinv: addi r6,r6,1 /* Increment */ rlwimi r7,r5,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r5) */ mtspr SPRN_MAS0,r7 tlbre + mfspr r8,SPRN_MAS1 + rlwinm r8,r8,0,2,0 /* clear IPROT */ mtspr SPRN_MAS1,r8 tlbwe /* Invalidate TLB1 */ diff --git a/arch/ppc/kernel/head_fsl_booke.S b/arch/ppc/kernel/head_fsl_booke.S index 66877bdfe0b7..54f40d95cdb9 100644 --- a/arch/ppc/kernel/head_fsl_booke.S +++ b/arch/ppc/kernel/head_fsl_booke.S @@ -206,7 +206,8 @@ skpinv: addi r6,r6,1 /* Increment */ rlwimi r7,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */ mtspr SPRN_MAS0,r7 tlbre - li r6,0 + mfspr r6,SPRN_MAS1 + rlwinm r6,r6,0,2,0 /* clear IPROT */ mtspr SPRN_MAS1,r6 tlbwe /* Invalidate TLB1 */ @@ -248,6 +249,8 @@ skpinv: addi r6,r6,1 /* Increment */ rlwimi r7,r5,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r5) */ mtspr SPRN_MAS0,r7 tlbre + mfspr r8,SPRN_MAS1 + rlwinm r8,r8,0,2,0 /* clear IPROT */ mtspr SPRN_MAS1,r8 tlbwe /* Invalidate TLB1 */ -- cgit v1.2.3 From 1f1fec94589ed0b14c749eb9494bb690dbdf8d5a Mon Sep 17 00:00:00 2001 From: David Gibson Date: Tue, 6 Feb 2007 12:48:31 +1100 Subject: [POWERPC] Remove ibm4{xx,4x}.h from arch/powerpc ARCH=powerpc should not use the ghastly un-multiplatformable tangle of includes that starts with asm-ppc/ibm4xx.h. This patch removes a compile-breaking include of it from head_44x.S. Signed-off-by: David Gibson Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/head_44x.S | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S index accb39d49911..a15d4b8cce48 100644 --- a/arch/powerpc/kernel/head_44x.S +++ b/arch/powerpc/kernel/head_44x.S @@ -32,8 +32,6 @@ #include #include #include -#include -#include #include #include #include -- cgit v1.2.3 From cbca567ea5b337eaa2685606cbb9183e79b8f97f Mon Sep 17 00:00:00 2001 From: Akira Iguchi Date: Fri, 9 Feb 2007 16:53:59 +0900 Subject: [POWERPC] Celleb: improve MMU hashtable locking Disabling IRQ is required only in invalidation. This changes "spin_lock_irqsave" to "spin_lock" in other ops. Signed-off-by: Kou Ishizaki Signed-off-by: Akira Iguchi Acked-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/celleb/htab.c | 19 ++++++++----------- 1 file changed, 8 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/celleb/htab.c b/arch/powerpc/platforms/celleb/htab.c index ffa7c2c2030d..279d7339e170 100644 --- a/arch/powerpc/platforms/celleb/htab.c +++ b/arch/powerpc/platforms/celleb/htab.c @@ -95,7 +95,6 @@ static long beat_lpar_hpte_insert(unsigned long hpte_group, unsigned long lpar_rc; unsigned long slot; unsigned long hpte_v, hpte_r; - unsigned long flags; /* same as iseries */ if (vflags & HPTE_V_SECONDARY) @@ -115,17 +114,17 @@ static long beat_lpar_hpte_insert(unsigned long hpte_group, if (rflags & (_PAGE_GUARDED|_PAGE_NO_CACHE)) hpte_r &= ~_PAGE_COHERENT; - spin_lock_irqsave(&beat_htab_lock, flags); + spin_lock(&beat_htab_lock); if ((lpar_rc = beat_read_mask(hpte_group)) == 0) { if (!(vflags & HPTE_V_BOLTED)) DBG_LOW(" full\n"); - spin_unlock_irqrestore(&beat_htab_lock, flags); + spin_unlock(&beat_htab_lock); return -1; } lpar_rc = beat_insert_htab_entry(0, hpte_group, lpar_rc << 48, hpte_v, hpte_r, &slot); - spin_unlock_irqrestore(&beat_htab_lock, flags); + spin_unlock(&beat_htab_lock); /* * Since we try and ioremap PHBs we don't own, the pte insert @@ -189,7 +188,6 @@ static long beat_lpar_hpte_updatepp(unsigned long slot, { unsigned long lpar_rc; unsigned long dummy0, dummy1, want_v; - unsigned long flags; want_v = hpte_encode_v(va, psize); @@ -197,17 +195,17 @@ static long beat_lpar_hpte_updatepp(unsigned long slot, "avpnv=%016lx, slot=%016lx, psize: %d, newpp %016lx ... ", want_v & HPTE_V_AVPN, slot, psize, newpp); - spin_lock_irqsave(&beat_htab_lock, flags); + spin_lock(&beat_htab_lock); dummy0 = beat_lpar_hpte_getword0(slot); if ((dummy0 & ~0x7FUL) != (want_v & ~0x7FUL)) { DBG_LOW("not found !\n"); - spin_unlock_irqrestore(&beat_htab_lock, flags); + spin_unlock(&beat_htab_lock); return -1; } lpar_rc = beat_write_htab_entry(0, slot, 0, newpp, 0, 7, &dummy0, &dummy1); - spin_unlock_irqrestore(&beat_htab_lock, flags); + spin_unlock(&beat_htab_lock); if (lpar_rc != 0 || dummy0 == 0) { DBG_LOW("not found !\n"); return -1; @@ -256,18 +254,17 @@ static void beat_lpar_hpte_updateboltedpp(unsigned long newpp, int psize) { unsigned long lpar_rc, slot, vsid, va, dummy0, dummy1; - unsigned long flags; vsid = get_kernel_vsid(ea); va = (vsid << 28) | (ea & 0x0fffffff); - spin_lock_irqsave(&beat_htab_lock, flags); + spin_lock(&beat_htab_lock); slot = beat_lpar_hpte_find(va, psize); BUG_ON(slot == -1); lpar_rc = beat_write_htab_entry(0, slot, 0, newpp, 0, 7, &dummy0, &dummy1); - spin_unlock_irqrestore(&beat_htab_lock, flags); + spin_unlock(&beat_htab_lock); BUG_ON(lpar_rc != 0); } -- cgit v1.2.3 From 2d99c41f05fc2a26737aacf943db03ca89841199 Mon Sep 17 00:00:00 2001 From: Olaf Hering Date: Sat, 10 Feb 2007 21:38:37 +0100 Subject: [POWERPC] Mark winbond IDE PCI resources with start 0 as unassigned libata calls pci_request_regions to claim PCI BAR 0 - 5 pci_request_regions fails if one of the regions cant be claimed. bar 5 has start == 0, __request_resource will fail. Tested on a p630 in SMP mode with pata_sl82c105 00:03.1 IDE interface: Symphony Labs SL82c105 (rev 05) (prog-if 8f [Master SecP SecO PriP PriO]) Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pseries/pci.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/platforms/pseries/pci.c b/arch/powerpc/platforms/pseries/pci.c index c69bd15ced9c..fa59124ce3fe 100644 --- a/arch/powerpc/platforms/pseries/pci.c +++ b/arch/powerpc/platforms/pseries/pci.c @@ -98,6 +98,10 @@ static void fixup_winbond_82c105(struct pci_dev* dev) if (dev->resource[i].flags & IORESOURCE_IO && dev->bus->number == 0 && dev->devfn == 0x81) dev->resource[i].flags &= ~IORESOURCE_IO; + if (dev->resource[i].start == 0 && dev->resource[i].end) { + dev->resource[i].flags = 0; + dev->resource[i].end = 0; + } } } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_WINBOND, PCI_DEVICE_ID_WINBOND_82C105, -- cgit v1.2.3 From 7ac9a13717c10c5ee074a6b23096c8d277fa5712 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 12 Feb 2007 13:31:08 +1100 Subject: [POWERPC] Fix vDSO page count calculation The recent vDSO consolidation patches broke powerpc due to a mistake in the definition of MAXPAGES constants. This fixes it by moving to a dynamically allocated array of pages instead as I don't like much hard coded size limits. Also move the vdso initialisation to an initcall since it doesn't really need to be done -that- early. Applogies for not catching the breakage earlier, Roland _did_ CC me on his patches a while ago, I got busy with other things and forgot to test them. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/vdso.c | 34 +++++++++++++++++++++++----------- arch/powerpc/mm/mem.c | 3 --- 2 files changed, 23 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c index 50149ec6efa4..e46c31b36641 100644 --- a/arch/powerpc/kernel/vdso.c +++ b/arch/powerpc/kernel/vdso.c @@ -49,24 +49,23 @@ /* Max supported size for symbol names */ #define MAX_SYMNAME 64 -#define VDSO32_MAXPAGES (((0x3000 + PAGE_MASK) >> PAGE_SHIFT) + 2) -#define VDSO64_MAXPAGES (((0x3000 + PAGE_MASK) >> PAGE_SHIFT) + 2) - extern char vdso32_start, vdso32_end; static void *vdso32_kbase = &vdso32_start; -unsigned int vdso32_pages; -static struct page *vdso32_pagelist[VDSO32_MAXPAGES]; +static unsigned int vdso32_pages; +static struct page **vdso32_pagelist; unsigned long vdso32_sigtramp; unsigned long vdso32_rt_sigtramp; #ifdef CONFIG_PPC64 extern char vdso64_start, vdso64_end; static void *vdso64_kbase = &vdso64_start; -unsigned int vdso64_pages; -static struct page *vdso64_pagelist[VDSO64_MAXPAGES]; +static unsigned int vdso64_pages; +static struct page **vdso64_pagelist; unsigned long vdso64_rt_sigtramp; #endif /* CONFIG_PPC64 */ +static int vdso_ready; + /* * The vdso data page (aka. systemcfg for old ppc64 fans) is here. * Once the early boot kernel code no longer needs to muck around @@ -182,6 +181,9 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, unsigned long vdso_base; int rc; + if (!vdso_ready) + return 0; + #ifdef CONFIG_PPC64 if (test_thread_flag(TIF_32BIT)) { vdso_pagelist = vdso32_pagelist; @@ -661,7 +663,7 @@ static void __init vdso_setup_syscall_map(void) } -void __init vdso_init(void) +static int __init vdso_init(void) { int i; @@ -716,11 +718,13 @@ void __init vdso_init(void) #ifdef CONFIG_PPC64 vdso64_pages = 0; #endif - return; + return 0; } /* Make sure pages are in the correct state */ - BUG_ON(vdso32_pages + 2 > VDSO32_MAXPAGES); + vdso32_pagelist = kzalloc(sizeof(struct page *) * (vdso32_pages + 2), + GFP_KERNEL); + BUG_ON(vdso32_pagelist == NULL); for (i = 0; i < vdso32_pages; i++) { struct page *pg = virt_to_page(vdso32_kbase + i*PAGE_SIZE); ClearPageReserved(pg); @@ -731,7 +735,9 @@ void __init vdso_init(void) vdso32_pagelist[i] = NULL; #ifdef CONFIG_PPC64 - BUG_ON(vdso64_pages + 2 > VDSO64_MAXPAGES); + vdso64_pagelist = kzalloc(sizeof(struct page *) * (vdso64_pages + 2), + GFP_KERNEL); + BUG_ON(vdso64_pagelist == NULL); for (i = 0; i < vdso64_pages; i++) { struct page *pg = virt_to_page(vdso64_kbase + i*PAGE_SIZE); ClearPageReserved(pg); @@ -743,7 +749,13 @@ void __init vdso_init(void) #endif /* CONFIG_PPC64 */ get_page(virt_to_page(vdso_data)); + + smp_wmb(); + vdso_ready = 1; + + return 0; } +arch_initcall(vdso_init); int in_gate_area_no_task(unsigned long addr) { diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index 77b4637097e9..52f397c108a7 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -384,9 +384,6 @@ void __init mem_init(void) initsize >> 10); mem_init_done = 1; - - /* Initialize the vDSO */ - vdso_init(); } /* -- cgit v1.2.3 From ab9367e38fa97c2ed7f72fd5fa29d0d70d58df89 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Mon, 12 Feb 2007 11:29:04 +0100 Subject: [POWERPC] ppc: Add support for AMCC Taishan 440GX eval board This patch adds support for the AMCC Taishan PPC440GX evaluation board. This is still an arch/ppc port. I'm aware that the move of 4xx to arch/powerpc is making good progress right now. So this patch is mainly intended to make the Taishan support available for the community right now. Signed-off-by: Stefan Roese Signed-off-by: Paul Mackerras --- arch/ppc/configs/taishan_defconfig | 1077 ++++++++++++++++++++++++++++++++++++ arch/ppc/platforms/4xx/Kconfig | 10 +- arch/ppc/platforms/4xx/Makefile | 1 + arch/ppc/platforms/4xx/taishan.c | 395 +++++++++++++ arch/ppc/platforms/4xx/taishan.h | 67 +++ arch/ppc/syslib/Makefile | 1 + 6 files changed, 1549 insertions(+), 2 deletions(-) create mode 100644 arch/ppc/configs/taishan_defconfig create mode 100644 arch/ppc/platforms/4xx/taishan.c create mode 100644 arch/ppc/platforms/4xx/taishan.h (limited to 'arch') diff --git a/arch/ppc/configs/taishan_defconfig b/arch/ppc/configs/taishan_defconfig new file mode 100644 index 000000000000..1ca0204267b1 --- /dev/null +++ b/arch/ppc/configs/taishan_defconfig @@ -0,0 +1,1077 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.20 +# Mon Feb 12 11:11:58 2007 +# +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_PPC=y +CONFIG_PPC32=y +CONFIG_GENERIC_NVRAM=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_GENERIC_BUG=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_HOTPLUG is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# Processor +# +# CONFIG_6xx is not set +# CONFIG_40x is not set +CONFIG_44x=y +# CONFIG_8xx is not set +# CONFIG_E200 is not set +# CONFIG_E500 is not set +CONFIG_PPC_DCR_NATIVE=y +CONFIG_PPC_DCR=y +CONFIG_BOOKE=y +CONFIG_PTE_64BIT=y +CONFIG_PHYS_64BIT=y +# CONFIG_MATH_EMULATION is not set +# CONFIG_KEXEC is not set +# CONFIG_CPU_FREQ is not set +CONFIG_4xx=y +CONFIG_WANT_EARLY_SERIAL=y + +# +# IBM 4xx options +# +# CONFIG_BAMBOO is not set +# CONFIG_EBONY is not set +# CONFIG_LUAN is not set +# CONFIG_YUCCA is not set +# CONFIG_OCOTEA is not set +CONFIG_TAISHAN=y +CONFIG_440GX=y +CONFIG_440A=y +CONFIG_IBM_OCP=y +CONFIG_IBM_EMAC4=y +CONFIG_PPC4xx_DMA=y +CONFIG_PPC4xx_EDMA=y +CONFIG_PPC_GEN550=y +CONFIG_NOT_COHERENT_CACHE=y + +# +# Platform options +# +# CONFIG_PC_KEYBOARD is not set +# CONFIG_HIGHMEM is not set +CONFIG_ARCH_POPULATES_NODE_MAP=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_RESOURCES_64BIT=y +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="ip=on console=ttyS0,115200" +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +# CONFIG_PPC_I8259 is not set +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PCI_DEBUG is not set + +# +# PCCARD (PCMCIA/CardBus) support +# + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_CONSISTENT_START=0xff100000 +CONFIG_CONSISTENT_SIZE=0x00200000 +CONFIG_BOOT_LOAD=0x01000000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_MULTIPLE_TABLES is not set +# CONFIG_IP_ROUTE_MULTIPATH is not set +# CONFIG_IP_ROUTE_VERBOSE is not set +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +CONFIG_BRIDGE=y +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +CONFIG_LLC=y +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +# CONFIG_STANDALONE is not set +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_GEOMETRY is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x8000000 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_PCI is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_NAND_CAFE is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=65536 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# +# CONFIG_MAC_EMUMOUSEBTN is not set +# CONFIG_WINDFARM is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_IBM_EMAC=y +CONFIG_IBM_EMAC_RXB=128 +CONFIG_IBM_EMAC_TXB=128 +CONFIG_IBM_EMAC_POLL_WEIGHT=32 +CONFIG_IBM_EMAC_RX_COPY_THRESHOLD=256 +CONFIG_IBM_EMAC_RX_SKB_HEADROOM=0 +CONFIG_IBM_EMAC_PHY_RX_CLK_FIX=y +# CONFIG_IBM_EMAC_DEBUG is not set +CONFIG_IBM_EMAC_ZMII=y +CONFIG_IBM_EMAC_RGMII=y +CONFIG_IBM_EMAC_TAH=y +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +CONFIG_E100=y +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set +# CONFIG_SC92031 is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +CONFIG_PPP=y +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +# CONFIG_PPP_ASYNC is not set +# CONFIG_PPP_SYNC_TTY is not set +# CONFIG_PPP_DEFLATE is not set +# CONFIG_PPP_BSDCOMP is not set +# CONFIG_PPP_MPPE is not set +CONFIG_PPPOE=y +# CONFIG_SLIP is not set +CONFIG_SLHC=y +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PCIPS2 is not set +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +# CONFIG_SERIAL_8250_MANY_PORTS is not set +CONFIG_SERIAL_8250_SHARE_IRQ=y +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +# CONFIG_SERIAL_8250_RSA is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=m +# CONFIG_NVRAM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +CONFIG_I2C_IBM_IIC=y +# CONFIG_I2C_MPC is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +CONFIG_SENSORS_EEPROM=y +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_M41T00 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB is not set +# CONFIG_FB_IBM_GXT4500 is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# Auxiliary Display support +# + +# +# Virtualization +# + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +CONFIG_EXT2_FS_XIP=y +CONFIG_FS_XIP=y +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +CONFIG_JBD_DEBUG=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +CONFIG_JFFS2_SUMMARY=y +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_KGDB is not set +# CONFIG_XMON is not set +CONFIG_BDI_SWITCH=y +# CONFIG_SERIAL_TEXT_DEBUG is not set +CONFIG_PPC_OCP=y + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set diff --git a/arch/ppc/platforms/4xx/Kconfig b/arch/ppc/platforms/4xx/Kconfig index 6980de420e92..705ae56016f0 100644 --- a/arch/ppc/platforms/4xx/Kconfig +++ b/arch/ppc/platforms/4xx/Kconfig @@ -98,6 +98,12 @@ config OCOTEA help This option enables support for the IBM PPC440GX evaluation board. +config TAISHAN + bool "Taishan" + select WANT_EARLY_SERIAL + help + This option enables support for the AMCC PPC440GX evaluation board. + endchoice config EP405PC @@ -126,7 +132,7 @@ config 440GP config 440GX bool - depends on OCOTEA + depends on OCOTEA || TAISHAN default y config 440SP @@ -173,7 +179,7 @@ config BOOKE config IBM_OCP bool - depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || YUCCA || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT + depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || YUCCA || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || TAISHAN || WALNUT default y config IBM_EMAC4 diff --git a/arch/ppc/platforms/4xx/Makefile b/arch/ppc/platforms/4xx/Makefile index a04a0d0a0f5c..fa6610bccaf9 100644 --- a/arch/ppc/platforms/4xx/Makefile +++ b/arch/ppc/platforms/4xx/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_OCOTEA) += ocotea.o obj-$(CONFIG_REDWOOD_5) += redwood5.o obj-$(CONFIG_REDWOOD_6) += redwood6.o obj-$(CONFIG_SYCAMORE) += sycamore.o +obj-$(CONFIG_TAISHAN) += taishan.o obj-$(CONFIG_WALNUT) += walnut.o obj-$(CONFIG_XILINX_ML300) += xilinx_ml300.o obj-$(CONFIG_XILINX_ML403) += xilinx_ml403.o diff --git a/arch/ppc/platforms/4xx/taishan.c b/arch/ppc/platforms/4xx/taishan.c new file mode 100644 index 000000000000..bb0253eef45a --- /dev/null +++ b/arch/ppc/platforms/4xx/taishan.c @@ -0,0 +1,395 @@ +/* + * arch/ppc/platforms/4xx/taishan.c + * + * AMCC Taishan board specific routines + * + * Copyright 2007 DENX Software Engineering, Stefan Roese + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include + +extern bd_t __res; + +static struct ibm44x_clocks clocks __initdata; + +/* + * NOR FLASH configuration (using mtd physmap driver) + */ + +/* start will be added dynamically, end is always fixed */ +static struct resource taishan_nor_resource = { + .start = TAISHAN_FLASH_ADDR, + .end = 0x1ffffffffULL, + .flags = IORESOURCE_MEM, +}; + +#define RW_PART0_OF 0 +#define RW_PART0_SZ 0x180000 +#define RW_PART1_SZ 0x200000 +/* Partition 2 will be autosized dynamically... */ +#define RW_PART3_SZ 0x80000 +#define RW_PART4_SZ 0x40000 + +static struct mtd_partition taishan_nor_parts[] = { + { + .name = "kernel", + .offset = 0, + .size = RW_PART0_SZ + }, + { + .name = "root", + .offset = MTDPART_OFS_APPEND, + .size = RW_PART1_SZ, + }, + { + .name = "user", + .offset = MTDPART_OFS_APPEND, +/* .size = RW_PART2_SZ */ /* will be adjusted dynamically */ + }, + { + .name = "env", + .offset = MTDPART_OFS_APPEND, + .size = RW_PART3_SZ, + }, + { + .name = "u-boot", + .offset = MTDPART_OFS_APPEND, + .size = RW_PART4_SZ, + } +}; + +static struct physmap_flash_data taishan_nor_data = { + .width = 4, + .parts = taishan_nor_parts, + .nr_parts = ARRAY_SIZE(taishan_nor_parts), +}; + +static struct platform_device taishan_nor_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &taishan_nor_data, + }, + .num_resources = 1, + .resource = &taishan_nor_resource, +}; + +static int taishan_setup_flash(void) +{ + /* + * Adjust partition 2 to flash size + */ + taishan_nor_parts[2].size = __res.bi_flashsize - + RW_PART0_SZ - RW_PART1_SZ - RW_PART3_SZ - RW_PART4_SZ; + + platform_device_register(&taishan_nor_device); + + return 0; +} +arch_initcall(taishan_setup_flash); + +static void __init +taishan_calibrate_decr(void) +{ + unsigned int freq; + + if (mfspr(SPRN_CCR1) & CCR1_TCS) + freq = TAISHAN_TMR_CLK; + else + freq = clocks.cpu; + + ibm44x_calibrate_decr(freq); +} + +static int +taishan_show_cpuinfo(struct seq_file *m) +{ + seq_printf(m, "vendor\t\t: AMCC\n"); + seq_printf(m, "machine\t\t: PPC440GX EVB (Taishan)\n"); + ibm440gx_show_cpuinfo(m); + return 0; +} + +static inline int +taishan_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) +{ + static char pci_irq_table[][4] = + /* + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + { + { 23, 24, 25, 26 }, /* IDSEL 1 - PCI Slot 0 */ + { 24, 25, 26, 23 }, /* IDSEL 2 - PCI Slot 1 */ + }; + + const long min_idsel = 1, max_idsel = 2, irqs_per_slot = 4; + return PCI_IRQ_TABLE_LOOKUP; +} + +static void __init taishan_set_emacdata(void) +{ + struct ocp_def *def; + struct ocp_func_emac_data *emacdata; + int i; + + /* Set phy_map, phy_mode, and mac_addr for each EMAC */ + for (i=2; i<4; i++) { + def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, i); + emacdata = def->additions; + if (i < 2) { + emacdata->phy_map = 0x00000001; /* Skip 0x00 */ + emacdata->phy_mode = PHY_MODE_SMII; + } else { + emacdata->phy_map = 0x00000001; /* Skip 0x00 */ + emacdata->phy_mode = PHY_MODE_RGMII; + } + if (i == 0) + memcpy(emacdata->mac_addr, "\0\0\0\0\0\0", 6); + else if (i == 1) + memcpy(emacdata->mac_addr, "\0\0\0\0\0\0", 6); + else if (i == 2) + memcpy(emacdata->mac_addr, __res.bi_enetaddr, 6); + else if (i == 3) + memcpy(emacdata->mac_addr, __res.bi_enet1addr, 6); + } +} + +#define PCIX_READW(offset) \ + (readw(pcix_reg_base+offset)) + +#define PCIX_WRITEW(value, offset) \ + (writew(value, pcix_reg_base+offset)) + +#define PCIX_WRITEL(value, offset) \ + (writel(value, pcix_reg_base+offset)) + +/* + * FIXME: This is only here to "make it work". This will move + * to a ibm_pcix.c which will contain a generic IBM PCIX bridge + * configuration library. -Matt + */ +static void __init +taishan_setup_pcix(void) +{ + void *pcix_reg_base; + + pcix_reg_base = ioremap64(PCIX0_REG_BASE, PCIX_REG_SIZE); + + /* Enable PCIX0 I/O, Mem, and Busmaster cycles */ + PCIX_WRITEW(PCIX_READW(PCIX0_COMMAND) | PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER, PCIX0_COMMAND); + + /* Disable all windows */ + PCIX_WRITEL(0, PCIX0_POM0SA); + PCIX_WRITEL(0, PCIX0_POM1SA); + PCIX_WRITEL(0, PCIX0_POM2SA); + PCIX_WRITEL(0, PCIX0_PIM0SA); + PCIX_WRITEL(0, PCIX0_PIM0SAH); + PCIX_WRITEL(0, PCIX0_PIM1SA); + PCIX_WRITEL(0, PCIX0_PIM2SA); + PCIX_WRITEL(0, PCIX0_PIM2SAH); + + /* Setup 2GB PLB->PCI outbound mem window (3_8000_0000->0_8000_0000) */ + PCIX_WRITEL(0x00000003, PCIX0_POM0LAH); + PCIX_WRITEL(0x80000000, PCIX0_POM0LAL); + PCIX_WRITEL(0x00000000, PCIX0_POM0PCIAH); + PCIX_WRITEL(0x80000000, PCIX0_POM0PCIAL); + PCIX_WRITEL(0x80000001, PCIX0_POM0SA); + + /* Setup 2GB PCI->PLB inbound memory window at 0, enable MSIs */ + PCIX_WRITEL(0x00000000, PCIX0_PIM0LAH); + PCIX_WRITEL(0x00000000, PCIX0_PIM0LAL); + PCIX_WRITEL(0xe0000007, PCIX0_PIM0SA); + PCIX_WRITEL(0xffffffff, PCIX0_PIM0SAH); + + iounmap(pcix_reg_base); + + eieio(); +} + +static void __init +taishan_setup_hose(void) +{ + struct pci_controller *hose; + + /* Configure windows on the PCI-X host bridge */ + taishan_setup_pcix(); + + hose = pcibios_alloc_controller(); + + if (!hose) + return; + + hose->first_busno = 0; + hose->last_busno = 0xff; + + hose->pci_mem_offset = TAISHAN_PCI_MEM_OFFSET; + + pci_init_resource(&hose->io_resource, + TAISHAN_PCI_LOWER_IO, + TAISHAN_PCI_UPPER_IO, + IORESOURCE_IO, + "PCI host bridge"); + + pci_init_resource(&hose->mem_resources[0], + TAISHAN_PCI_LOWER_MEM, + TAISHAN_PCI_UPPER_MEM, + IORESOURCE_MEM, + "PCI host bridge"); + + hose->io_space.start = TAISHAN_PCI_LOWER_IO; + hose->io_space.end = TAISHAN_PCI_UPPER_IO; + hose->mem_space.start = TAISHAN_PCI_LOWER_MEM; + hose->mem_space.end = TAISHAN_PCI_UPPER_MEM; + hose->io_base_virt = ioremap64(TAISHAN_PCI_IO_BASE, TAISHAN_PCI_IO_SIZE); + isa_io_base = (unsigned long) hose->io_base_virt; + + setup_indirect_pci(hose, + TAISHAN_PCI_CFGA_PLB32, + TAISHAN_PCI_CFGD_PLB32); + hose->set_cfg_type = 1; + + hose->last_busno = pciauto_bus_scan(hose, hose->first_busno); + + ppc_md.pci_swizzle = common_swizzle; + ppc_md.pci_map_irq = taishan_map_irq; +} + + +static void __init +taishan_early_serial_map(void) +{ + struct uart_port port; + + /* Setup ioremapped serial port access */ + memset(&port, 0, sizeof(port)); + port.membase = ioremap64(PPC440GX_UART0_ADDR, 8); + port.irq = UART0_INT; + port.uartclk = clocks.uart0; + port.regshift = 0; + port.iotype = UPIO_MEM; + port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST; + port.line = 0; + + if (early_serial_setup(&port) != 0) + printk("Early serial init of port 0 failed\n"); + +#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB) + /* Configure debug serial access */ + gen550_init(0, &port); + + /* Purge TLB entry added in head_44x.S for early serial access */ + _tlbie(UART0_IO_BASE); +#endif + + port.membase = ioremap64(PPC440GX_UART1_ADDR, 8); + port.irq = UART1_INT; + port.uartclk = clocks.uart1; + port.line = 1; + + if (early_serial_setup(&port) != 0) + printk("Early serial init of port 1 failed\n"); + +#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB) + /* Configure debug serial access */ + gen550_init(1, &port); +#endif +} + +static void __init +taishan_setup_arch(void) +{ + taishan_set_emacdata(); + + ibm440gx_tah_enable(); + + /* + * Determine various clocks. + * To be completely correct we should get SysClk + * from FPGA, because it can be changed by on-board switches + * --ebs + */ + ibm440gx_get_clocks(&clocks, 33333333, 6 * 1843200); + ocp_sys_info.opb_bus_freq = clocks.opb; + + /* init to some ~sane value until calibrate_delay() runs */ + loops_per_jiffy = 50000000/HZ; + + /* Setup PCI host bridge */ + taishan_setup_hose(); + +#ifdef CONFIG_BLK_DEV_INITRD + if (initrd_start) + ROOT_DEV = Root_RAM0; + else +#endif +#ifdef CONFIG_ROOT_NFS + ROOT_DEV = Root_NFS; +#else + ROOT_DEV = Root_HDA1; +#endif + + taishan_early_serial_map(); + + /* Identify the system */ + printk("AMCC PowerPC 440GX Taishan Platform\n"); +} + +static void __init taishan_init(void) +{ + ibm440gx_l2c_setup(&clocks); +} + +void __init platform_init(unsigned long r3, unsigned long r4, + unsigned long r5, unsigned long r6, unsigned long r7) +{ + ibm44x_platform_init(r3, r4, r5, r6, r7); + + ppc_md.setup_arch = taishan_setup_arch; + ppc_md.show_cpuinfo = taishan_show_cpuinfo; + ppc_md.get_irq = NULL; /* Set in ppc4xx_pic_init() */ + + ppc_md.calibrate_decr = taishan_calibrate_decr; + +#ifdef CONFIG_KGDB + ppc_md.early_serial_map = taishan_early_serial_map; +#endif + ppc_md.init = taishan_init; +} + diff --git a/arch/ppc/platforms/4xx/taishan.h b/arch/ppc/platforms/4xx/taishan.h new file mode 100644 index 000000000000..ea7561a80457 --- /dev/null +++ b/arch/ppc/platforms/4xx/taishan.h @@ -0,0 +1,67 @@ +/* + * arch/ppc/platforms/4xx/taishan.h + * + * AMCC Taishan board definitions + * + * Copyright 2007 DENX Software Engineering, Stefan Roese + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifdef __KERNEL__ +#ifndef __ASM_TAISHAN_H__ +#define __ASM_TAISHAN_H__ + +#include + +/* External timer clock frequency */ +#define TAISHAN_TMR_CLK 25000000 + +/* Flash */ +#define TAISHAN_FPGA_ADDR 0x0000000141000000ULL +#define TAISHAN_LCM_ADDR 0x0000000142000000ULL +#define TAISHAN_FLASH_ADDR 0x00000001fc000000ULL +#define TAISHAN_FLASH_SIZE 0x4000000 + +/* + * Serial port defines + */ +#define RS_TABLE_SIZE 2 + +/* head_44x.S created UART mapping, used before early_serial_setup. + * We cannot use default OpenBIOS UART mappings because they + * don't work for configurations with more than 512M RAM. --ebs + */ +#define UART0_IO_BASE 0xF0000200 +#define UART1_IO_BASE 0xF0000300 + +#define BASE_BAUD 11059200/16 +#define STD_UART_OP(num) \ + { 0, BASE_BAUD, 0, UART##num##_INT, \ + (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \ + iomem_base: (void*)UART##num##_IO_BASE, \ + io_type: SERIAL_IO_MEM}, + +#define SERIAL_PORT_DFNS \ + STD_UART_OP(0) \ + STD_UART_OP(1) + +/* PCI support */ +#define TAISHAN_PCI_LOWER_IO 0x00000000 +#define TAISHAN_PCI_UPPER_IO 0x0000ffff +#define TAISHAN_PCI_LOWER_MEM 0x80000000 +#define TAISHAN_PCI_UPPER_MEM 0xffffefff + +#define TAISHAN_PCI_CFGA_PLB32 0x0ec00000 +#define TAISHAN_PCI_CFGD_PLB32 0x0ec00004 + +#define TAISHAN_PCI_IO_BASE 0x0000000208000000ULL +#define TAISHAN_PCI_IO_SIZE 0x00010000 +#define TAISHAN_PCI_MEM_OFFSET 0x00000000 + +#endif /* __ASM_TAISHAN_H__ */ +#endif /* __KERNEL__ */ diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile index d84f04666972..09911118c675 100644 --- a/arch/ppc/syslib/Makefile +++ b/arch/ppc/syslib/Makefile @@ -69,6 +69,7 @@ obj-$(CONFIG_SANDPOINT) += pci_auto.o todc_time.o obj-$(CONFIG_SBC82xx) += todc_time.o obj-$(CONFIG_SPRUCE) += cpc700_pic.o pci_auto.o \ todc_time.o +obj-$(CONFIG_TAISHAN) += pci_auto.o obj-$(CONFIG_8260) += m8260_setup.o pq2_devices.o pq2_sys.o \ ppc_sys.o obj-$(CONFIG_PCI_8260) += m82xx_pci.o pci_auto.o -- cgit v1.2.3 From 40d244d69a3871dd05a5fdae29f36823a6ee3e33 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Mon, 12 Feb 2007 22:10:48 +1100 Subject: [POWERPC] correct a prototype This rids us of a warning. Signed-off-by: Stephen Rothwell Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/cputable.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index dd17dffbf058..7ec4ac77c0fa 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -44,7 +44,7 @@ extern void __setup_cpu_745x(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_ppc970(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_ppc970MP(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_pa6t(unsigned long offset, struct cpu_spec* spec); -extern void __restore_cpu_pa6t(unsigned long offset, struct cpu_spec* spec); +extern void __restore_cpu_pa6t(void); extern void __restore_cpu_ppc970(void); #endif /* CONFIG_PPC64 */ -- cgit v1.2.3 From e3aba81d154c53a82e2a7e0ff5e7f1162a53cf27 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Mon, 12 Feb 2007 13:36:55 -0700 Subject: [POWERPC] Fixup mp5200 drivers to match device tree changes Signed-off-by: Grant Likely Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/52xx/lite5200.c | 29 ++++++++++++++-------------- arch/powerpc/platforms/52xx/mpc52xx_common.c | 4 ++-- arch/powerpc/platforms/52xx/mpc52xx_pic.c | 10 +++++----- 3 files changed, 22 insertions(+), 21 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/52xx/lite5200.c b/arch/powerpc/platforms/52xx/lite5200.c index cdb16bfa6ca6..cc3b40de21dd 100644 --- a/arch/powerpc/platforms/52xx/lite5200.c +++ b/arch/powerpc/platforms/52xx/lite5200.c @@ -51,13 +51,13 @@ */ static void __init -lite52xx_setup_cpu(void) +lite5200_setup_cpu(void) { struct mpc52xx_gpio __iomem *gpio; u32 port_config; /* Map zones */ - gpio = mpc52xx_find_and_map("mpc52xx-gpio"); + gpio = mpc52xx_find_and_map("mpc5200-gpio"); if (!gpio) { printk(KERN_ERR __FILE__ ": " "Error while mapping GPIO register for port config. " @@ -85,12 +85,12 @@ error: iounmap(gpio); } -static void __init lite52xx_setup_arch(void) +static void __init lite5200_setup_arch(void) { struct device_node *np; if (ppc_md.progress) - ppc_md.progress("lite52xx_setup_arch()", 0); + ppc_md.progress("lite5200_setup_arch()", 0); np = of_find_node_by_type(NULL, "cpu"); if (np) { @@ -105,7 +105,7 @@ static void __init lite52xx_setup_arch(void) /* CPU & Port mux setup */ mpc52xx_setup_cpu(); /* Generic */ - lite52xx_setup_cpu(); /* Platorm specific */ + lite5200_setup_cpu(); /* Platorm specific */ #ifdef CONFIG_PCI np = of_find_node_by_type(np, "pci"); @@ -126,7 +126,7 @@ static void __init lite52xx_setup_arch(void) } -void lite52xx_show_cpuinfo(struct seq_file *m) +void lite5200_show_cpuinfo(struct seq_file *m) { struct device_node* np = of_find_all_nodes(NULL); const char *model = NULL; @@ -143,25 +143,26 @@ void lite52xx_show_cpuinfo(struct seq_file *m) /* * Called very early, MMU is off, device-tree isn't unflattened */ -static int __init lite52xx_probe(void) +static int __init lite5200_probe(void) { unsigned long node = of_get_flat_dt_root(); const char *model = of_get_flat_dt_prop(node, "model", NULL); - if (!of_flat_dt_is_compatible(node, "lite52xx")) + if (!of_flat_dt_is_compatible(node, "fsl,lite5200") && + !of_flat_dt_is_compatible(node, "fsl,lite5200b")) return 0; - pr_debug("%s board w/ mpc52xx found\n", model ? model : "unknown"); + pr_debug("%s board found\n", model ? model : "unknown"); return 1; } -define_machine(lite52xx) { - .name = "lite52xx", - .probe = lite52xx_probe, - .setup_arch = lite52xx_setup_arch, +define_machine(lite5200) { + .name = "lite5200", + .probe = lite5200_probe, + .setup_arch = lite5200_setup_arch, .init = mpc52xx_declare_of_platform_devices, .init_IRQ = mpc52xx_init_irq, .get_irq = mpc52xx_get_irq, - .show_cpuinfo = lite52xx_show_cpuinfo, + .show_cpuinfo = lite5200_show_cpuinfo, .calibrate_decr = generic_calibrate_decr, }; diff --git a/arch/powerpc/platforms/52xx/mpc52xx_common.c b/arch/powerpc/platforms/52xx/mpc52xx_common.c index cc40889074bd..ed0cb694aea8 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_common.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_common.c @@ -83,8 +83,8 @@ mpc52xx_setup_cpu(void) struct mpc52xx_xlb __iomem *xlb; /* Map zones */ - cdm = mpc52xx_find_and_map("mpc52xx-cdm"); - xlb = mpc52xx_find_and_map("mpc52xx-xlb"); + cdm = mpc52xx_find_and_map("mpc5200-cdm"); + xlb = mpc52xx_find_and_map("mpc5200-xlb"); if (!cdm || !xlb) { printk(KERN_ERR __FILE__ ": " diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pic.c b/arch/powerpc/platforms/52xx/mpc52xx_pic.c index cd91a6c3aafa..c75192567e55 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_pic.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_pic.c @@ -383,16 +383,16 @@ void __init mpc52xx_init_irq(void) struct device_node *picnode; /* Remap the necessary zones */ - picnode = of_find_compatible_node(NULL, NULL, "mpc52xx-pic"); + picnode = of_find_compatible_node(NULL, NULL, "mpc5200-pic"); - intr = mpc52xx_find_and_map("mpc52xx-pic"); + intr = mpc52xx_find_and_map("mpc5200-pic"); if (!intr) - panic(__FILE__ ": find_and_map failed on 'mpc52xx-pic'. " + panic(__FILE__ ": find_and_map failed on 'mpc5200-pic'. " "Check node !"); - sdma = mpc52xx_find_and_map("mpc52xx-bestcomm"); + sdma = mpc52xx_find_and_map("mpc5200-bestcomm"); if (!sdma) - panic(__FILE__ ": find_and_map failed on 'mpc52xx-bestcomm'. " + panic(__FILE__ ": find_and_map failed on 'mpc5200-bestcomm'. " "Check node !"); /* Disable all interrupt sources. */ -- cgit v1.2.3 From 05cbbc692f513c0e62372abeab01b04b07096582 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Mon, 12 Feb 2007 13:36:54 -0700 Subject: [POWERPC] mpc5200 device tree bindings refinement Much needed refinement of mpc5200 device tree binding specifications. Short list: - drop mpc52xx designator; only two supported chips exist, 5200 and 5200b. It's premature to refer to them as '52xx'. - Specify optional 'model' and 'revision' properties in the soc5200 node - Specify reqiured 'cell-index' property to identify between multiple SOC devices of the same type. (Useful for arbitrating shared register access) - Specify optional 'port-number' property for adjusting the logical serial port assignments. - Specify optional 'has-wdt' property for gpt0 node. - Add system-frequency property to soc5200 node Signed-off-by: Grant Likely Signed-off-by: Paul Mackerras --- arch/powerpc/boot/dts/lite5200.dts | 135 +++++++++++++++++++++--------------- arch/powerpc/boot/dts/lite5200b.dts | 135 +++++++++++++++++++++--------------- 2 files changed, 158 insertions(+), 112 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts index 186870704ad9..c03103c63285 100644 --- a/arch/powerpc/boot/dts/lite5200.dts +++ b/arch/powerpc/boot/dts/lite5200.dts @@ -1,7 +1,7 @@ /* * Lite5200 board Device Tree Source * - * Copyright 2006 Secret Lab Technologies Ltd. + * Copyright 2006-2007 Secret Lab Technologies Ltd. * Grant Likely * * This program is free software; you can redistribute it and/or modify it @@ -17,8 +17,9 @@ */ / { - model = "Lite5200"; - compatible = "lite5200\0lite52xx\0mpc5200\0mpc52xx"; + model = "fsl,lite5200"; + // revision = "1.0"; + compatible = "fsl,lite5200\0generic-mpc5200"; #address-cells = <1>; #size-cells = <1>; @@ -47,14 +48,17 @@ }; soc5200@f0000000 { + model = "fsl,mpc5200"; + revision = "" // from bootloader #interrupt-cells = <3>; device_type = "soc"; ranges = <0 f0000000 f0010000>; reg = ; bus-frequency = <0>; // from bootloader + system-frequency = <0>; // from bootloader cdm@200 { - compatible = "mpc5200-cdm\0mpc52xx-cdm"; + compatible = "mpc5200-cdm"; reg = <200 38>; }; @@ -64,77 +68,86 @@ interrupt-controller; #interrupt-cells = <3>; device_type = "interrupt-controller"; - compatible = "mpc5200-pic\0mpc52xx-pic"; + compatible = "mpc5200-pic"; reg = <500 80>; built-in; }; gpt@600 { // General Purpose Timer - compatible = "mpc5200-gpt\0mpc52xx-gpt"; + compatible = "mpc5200-gpt"; device_type = "gpt"; + cell-index = <0>; reg = <600 10>; interrupts = <1 9 0>; interrupt-parent = <500>; + has-wdt; }; gpt@610 { // General Purpose Timer - compatible = "mpc5200-gpt\0mpc52xx-gpt"; + compatible = "mpc5200-gpt"; device_type = "gpt"; + cell-index = <1>; reg = <610 10>; interrupts = <1 a 0>; interrupt-parent = <500>; }; gpt@620 { // General Purpose Timer - compatible = "mpc5200-gpt\0mpc52xx-gpt"; + compatible = "mpc5200-gpt"; device_type = "gpt"; + cell-index = <2>; reg = <620 10>; interrupts = <1 b 0>; interrupt-parent = <500>; }; gpt@630 { // General Purpose Timer - compatible = "mpc5200-gpt\0mpc52xx-gpt"; + compatible = "mpc5200-gpt"; device_type = "gpt"; + cell-index = <3>; reg = <630 10>; interrupts = <1 c 0>; interrupt-parent = <500>; }; gpt@640 { // General Purpose Timer - compatible = "mpc5200-gpt\0mpc52xx-gpt"; + compatible = "mpc5200-gpt"; device_type = "gpt"; + cell-index = <4>; reg = <640 10>; interrupts = <1 d 0>; interrupt-parent = <500>; }; gpt@650 { // General Purpose Timer - compatible = "mpc5200-gpt\0mpc52xx-gpt"; + compatible = "mpc5200-gpt"; device_type = "gpt"; + cell-index = <5>; reg = <650 10>; interrupts = <1 e 0>; interrupt-parent = <500>; }; gpt@660 { // General Purpose Timer - compatible = "mpc5200-gpt\0mpc52xx-gpt"; + compatible = "mpc5200-gpt"; device_type = "gpt"; + cell-index = <6>; reg = <660 10>; interrupts = <1 f 0>; interrupt-parent = <500>; }; gpt@670 { // General Purpose Timer - compatible = "mpc5200-gpt\0mpc52xx-gpt"; + compatible = "mpc5200-gpt"; device_type = "gpt"; + cell-index = <7>; reg = <670 10>; interrupts = <1 10 0>; interrupt-parent = <500>; }; rtc@800 { // Real time clock - compatible = "mpc5200-rtc\0mpc52xx-rtc"; + compatible = "mpc5200-rtc"; device_type = "rtc"; reg = <800 100>; interrupts = <1 5 0 1 6 0>; @@ -143,7 +156,8 @@ mscan@900 { device_type = "mscan"; - compatible = "mpc5200-mscan\0mpc52xx-mscan"; + compatible = "mpc5200-mscan"; + cell-index = <0>; interrupts = <2 11 0>; interrupt-parent = <500>; reg = <900 80>; @@ -151,21 +165,22 @@ mscan@980 { device_type = "mscan"; - compatible = "mpc5200-mscan\0mpc52xx-mscan"; + compatible = "mpc5200-mscan"; + cell-index = <1>; interrupts = <1 12 0>; interrupt-parent = <500>; reg = <980 80>; }; gpio@b00 { - compatible = "mpc5200-gpio\0mpc52xx-gpio"; + compatible = "mpc5200-gpio"; reg = ; interrupts = <1 7 0>; interrupt-parent = <500>; }; gpio-wkup@b00 { - compatible = "mpc5200-gpio-wkup\0mpc52xx-gpio-wkup"; + compatible = "mpc5200-gpio-wkup"; reg = ; interrupts = <1 8 0 0 3 0>; interrupt-parent = <500>; @@ -176,7 +191,7 @@ #size-cells = <2>; #address-cells = <3>; device_type = "pci"; - compatible = "mpc5200-pci\0mpc52xx-pci"; + compatible = "mpc5200-pci"; reg = ; interrupt-map-mask = ; interrupt-map = ; interrupts = <2 d 0 2 e 0>; interrupt-parent = <500>; @@ -202,7 +217,7 @@ usb@1000 { device_type = "usb-ohci-be"; - compatible = "mpc5200-ohci\0mpc52xx-ohci\0ohci-be"; + compatible = "mpc5200-ohci\0ohci-be"; reg = <1000 ff>; interrupts = <2 6 0>; interrupt-parent = <500>; @@ -210,7 +225,7 @@ bestcomm@1200 { device_type = "dma-controller"; - compatible = "mpc5200-bestcomm\0mpc52xx-bestcomm"; + compatible = "mpc5200-bestcomm"; reg = <1200 80>; interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 3 4 0 3 5 0 3 6 0 3 7 0 @@ -220,67 +235,73 @@ }; xlb@1f00 { - compatible = "mpc5200-xlb\0mpc52xx-xlb"; + compatible = "mpc5200-xlb"; reg = <1f00 100>; }; serial@2000 { // PSC1 device_type = "serial"; - compatible = "mpc5200-psc-uart\0mpc52xx-psc-uart"; + compatible = "mpc5200-psc-uart"; port-number = <0>; // Logical port assignment + cell-index = <0>; reg = <2000 100>; interrupts = <2 1 0>; interrupt-parent = <500>; }; - // PSC2 in spi mode example - spi@2200 { // PSC2 - device_type = "spi"; - compatible = "mpc5200-psc-spi\0mpc52xx-psc-spi"; - reg = <2200 100>; - interrupts = <2 2 0>; - interrupt-parent = <500>; - }; + // PSC2 in ac97 mode example + //ac97@2200 { // PSC2 + // device_type = "sound"; + // compatible = "mpc5200-psc-ac97"; + // cell-index = <1>; + // reg = <2200 100>; + // interrupts = <2 2 0>; + // interrupt-parent = <500>; + //}; // PSC3 in CODEC mode example - i2s@2400 { // PSC3 - device_type = "sound"; - compatible = "mpc5200-psc-i2s\0mpc52xx-psc-i2s"; - reg = <2400 100>; - interrupts = <2 3 0>; - interrupt-parent = <500>; - }; + //i2s@2400 { // PSC3 + // device_type = "sound"; + // compatible = "mpc5200-psc-i2s"; + // cell-index = <2>; + // reg = <2400 100>; + // interrupts = <2 3 0>; + // interrupt-parent = <500>; + //}; - // PSC4 unconfigured + // PSC4 in uart mode example //serial@2600 { // PSC4 // device_type = "serial"; - // compatible = "mpc5200-psc-uart\0mpc52xx-psc-uart"; + // compatible = "mpc5200-psc-uart"; + // cell-index = <3>; // reg = <2600 100>; // interrupts = <2 b 0>; // interrupt-parent = <500>; //}; - // PSC5 unconfigured + // PSC5 in uart mode example //serial@2800 { // PSC5 // device_type = "serial"; - // compatible = "mpc5200-psc-uart\0mpc52xx-psc-uart"; + // compatible = "mpc5200-psc-uart"; + // cell-index = <4>; // reg = <2800 100>; // interrupts = <2 c 0>; // interrupt-parent = <500>; //}; - // PSC6 in AC97 mode example - ac97@2c00 { // PSC6 - device_type = "sound"; - compatible = "mpc5200-psc-ac97\0mpc52xx-psc-ac97"; - reg = <2c00 100>; - interrupts = <2 4 0>; - interrupt-parent = <500>; - }; + // PSC6 in spi mode example + //spi@2c00 { // PSC6 + // device_type = "spi"; + // compatible = "mpc5200-psc-spi"; + // cell-index = <5>; + // reg = <2c00 100>; + // interrupts = <2 4 0>; + // interrupt-parent = <500>; + //}; ethernet@3000 { device_type = "network"; - compatible = "mpc5200-fec\0mpc52xx-fec"; + compatible = "mpc5200-fec"; reg = <3000 800>; mac-address = [ 02 03 04 05 06 07 ]; // Bad! interrupts = <2 5 0>; @@ -289,7 +310,7 @@ ata@3a00 { device_type = "ata"; - compatible = "mpc5200-ata\0mpc52xx-ata"; + compatible = "mpc5200-ata"; reg = <3a00 100>; interrupts = <2 7 0>; interrupt-parent = <500>; @@ -297,7 +318,8 @@ i2c@3d00 { device_type = "i2c"; - compatible = "mpc5200-i2c\0mpc52xx-i2c"; + compatible = "mpc5200-i2c"; + cell-index = <0>; reg = <3d00 40>; interrupts = <2 f 0>; interrupt-parent = <500>; @@ -305,14 +327,15 @@ i2c@3d40 { device_type = "i2c"; - compatible = "mpc5200-i2c\0mpc52xx-i2c"; + compatible = "mpc5200-i2c"; + cell-index = <1>; reg = <3d40 40>; interrupts = <2 10 0>; interrupt-parent = <500>; }; sram@8000 { device_type = "sram"; - compatible = "mpc5200-sram\0mpc52xx-sram\0sram"; + compatible = "mpc5200-sram\0sram"; reg = <8000 4000>; }; }; diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts index 5bb2760d7c30..3875ca9a9a62 100644 --- a/arch/powerpc/boot/dts/lite5200b.dts +++ b/arch/powerpc/boot/dts/lite5200b.dts @@ -1,7 +1,7 @@ /* * Lite5200B board Device Tree Source * - * Copyright 2006 Secret Lab Technologies Ltd. + * Copyright 2006-2007 Secret Lab Technologies Ltd. * Grant Likely * * This program is free software; you can redistribute it and/or modify it @@ -17,8 +17,9 @@ */ / { - model = "Lite5200b"; - compatible = "lite5200b\0lite52xx\0mpc5200b\0mpc52xx"; + model = "fsl,lite5200b"; + // revision = "1.0"; + compatible = "fsl,lite5200b\0generic-mpc5200"; #address-cells = <1>; #size-cells = <1>; @@ -47,14 +48,17 @@ }; soc5200@f0000000 { + model = "fsl,mpc5200b"; + revision = ""; // from bootloader #interrupt-cells = <3>; device_type = "soc"; ranges = <0 f0000000 f0010000>; reg = ; bus-frequency = <0>; // from bootloader + system-frequency = <0>; // from bootloader cdm@200 { - compatible = "mpc5200b-cdm\0mpc52xx-cdm"; + compatible = "mpc5200b-cdm\0mpc5200-cdm"; reg = <200 38>; }; @@ -64,77 +68,86 @@ interrupt-controller; #interrupt-cells = <3>; device_type = "interrupt-controller"; - compatible = "mpc5200b-pic\0mpc52xx-pic"; + compatible = "mpc5200b-pic\0mpc5200-pic"; reg = <500 80>; built-in; }; gpt@600 { // General Purpose Timer - compatible = "mpc5200b-gpt\0mpc52xx-gpt"; + compatible = "mpc5200b-gpt\0mpc5200-gpt"; device_type = "gpt"; + cell-index = <0>; reg = <600 10>; interrupts = <1 9 0>; interrupt-parent = <500>; + has-wdt; }; gpt@610 { // General Purpose Timer - compatible = "mpc5200b-gpt\0mpc52xx-gpt"; + compatible = "mpc5200b-gpt\0mpc5200-gpt"; device_type = "gpt"; + cell-index = <1>; reg = <610 10>; interrupts = <1 a 0>; interrupt-parent = <500>; }; gpt@620 { // General Purpose Timer - compatible = "mpc5200b-gpt\0mpc52xx-gpt"; + compatible = "mpc5200b-gpt\0mpc5200-gpt"; device_type = "gpt"; + cell-index = <2>; reg = <620 10>; interrupts = <1 b 0>; interrupt-parent = <500>; }; gpt@630 { // General Purpose Timer - compatible = "mpc5200b-gpt\0mpc52xx-gpt"; + compatible = "mpc5200b-gpt\0mpc5200-gpt"; device_type = "gpt"; + cell-index = <3>; reg = <630 10>; interrupts = <1 c 0>; interrupt-parent = <500>; }; gpt@640 { // General Purpose Timer - compatible = "mpc5200b-gpt\0mpc52xx-gpt"; + compatible = "mpc5200b-gpt\0mpc5200-gpt"; device_type = "gpt"; + cell-index = <4>; reg = <640 10>; interrupts = <1 d 0>; interrupt-parent = <500>; }; gpt@650 { // General Purpose Timer - compatible = "mpc5200b-gpt\0mpc52xx-gpt"; + compatible = "mpc5200b-gpt\0mpc5200-gpt"; device_type = "gpt"; + cell-index = <5>; reg = <650 10>; interrupts = <1 e 0>; interrupt-parent = <500>; }; gpt@660 { // General Purpose Timer - compatible = "mpc5200b-gpt\0mpc52xx-gpt"; + compatible = "mpc5200b-gpt\0mpc5200-gpt"; device_type = "gpt"; + cell-index = <6>; reg = <660 10>; interrupts = <1 f 0>; interrupt-parent = <500>; }; gpt@670 { // General Purpose Timer - compatible = "mpc5200b-gpt\0mpc52xx-gpt"; + compatible = "mpc5200b-gpt\0mpc5200-gpt"; device_type = "gpt"; + cell-index = <7>; reg = <670 10>; interrupts = <1 10 0>; interrupt-parent = <500>; }; rtc@800 { // Real time clock - compatible = "mpc5200b-rtc\0mpc52xx-rtc"; + compatible = "mpc5200b-rtc\0mpc5200-rtc"; device_type = "rtc"; reg = <800 100>; interrupts = <1 5 0 1 6 0>; @@ -143,7 +156,8 @@ mscan@900 { device_type = "mscan"; - compatible = "mpc5200b-mscan\0mpc52xx-mscan"; + compatible = "mpc5200b-mscan\0mpc5200-mscan"; + cell-index = <0>; interrupts = <2 11 0>; interrupt-parent = <500>; reg = <900 80>; @@ -151,21 +165,22 @@ mscan@980 { device_type = "mscan"; - compatible = "mpc5200b-mscan\0mpc52xx-mscan"; + compatible = "mpc5200b-mscan\0mpc5200-mscan"; + cell-index = <1>; interrupts = <1 12 0>; interrupt-parent = <500>; reg = <980 80>; }; gpio@b00 { - compatible = "mpc5200b-gpio\0mpc52xx-gpio"; + compatible = "mpc5200b-gpio\0mpc5200-gpio"; reg = ; interrupts = <1 7 0>; interrupt-parent = <500>; }; gpio-wkup@b00 { - compatible = "mpc5200b-gpio-wkup\0mpc52xx-gpio-wkup"; + compatible = "mpc5200b-gpio-wkup\0mpc5200-gpio-wkup"; reg = ; interrupts = <1 8 0 0 3 0>; interrupt-parent = <500>; @@ -176,7 +191,7 @@ #size-cells = <2>; #address-cells = <3>; device_type = "pci"; - compatible = "mpc5200b-pci\0mpc52xx-pci"; + compatible = "mpc5200b-pci\0mpc5200-pci"; reg = ; interrupt-map-mask = ; interrupt-map = ; interrupts = <2 d 0 2 e 0>; interrupt-parent = <500>; @@ -207,7 +222,7 @@ usb@1000 { device_type = "usb-ohci-be"; - compatible = "mpc5200b-ohci\0mpc52xx-ohci\0ohci-be"; + compatible = "mpc5200b-ohci\0mpc5200-ohci\0ohci-be"; reg = <1000 ff>; interrupts = <2 6 0>; interrupt-parent = <500>; @@ -215,7 +230,7 @@ bestcomm@1200 { device_type = "dma-controller"; - compatible = "mpc5200b-bestcomm\0mpc52xx-bestcomm"; + compatible = "mpc5200b-bestcomm\0mpc5200-bestcomm"; reg = <1200 80>; interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 3 4 0 3 5 0 3 6 0 3 7 0 @@ -225,67 +240,73 @@ }; xlb@1f00 { - compatible = "mpc5200b-xlb\0mpc52xx-xlb"; + compatible = "mpc5200b-xlb\0mpc5200-xlb"; reg = <1f00 100>; }; serial@2000 { // PSC1 device_type = "serial"; - compatible = "mpc5200b-psc-uart\0mpc52xx-psc-uart"; + compatible = "mpc5200b-psc-uart\0mpc5200-psc-uart"; port-number = <0>; // Logical port assignment + cell-index = <0>; reg = <2000 100>; interrupts = <2 1 0>; interrupt-parent = <500>; }; - // PSC2 in spi mode example - spi@2200 { // PSC2 - device_type = "spi"; - compatible = "mpc5200b-psc-spi\0mpc52xx-psc-spi"; - reg = <2200 100>; - interrupts = <2 2 0>; - interrupt-parent = <500>; - }; + // PSC2 in ac97 mode example + //ac97@2200 { // PSC2 + // device_type = "sound"; + // compatible = "mpc5200b-psc-ac97\0mpc5200-psc-ac97"; + // cell-index = <1>; + // reg = <2200 100>; + // interrupts = <2 2 0>; + // interrupt-parent = <500>; + //}; // PSC3 in CODEC mode example - i2s@2400 { // PSC3 - device_type = "sound"; - compatible = "mpc5200b-psc-i2s\0mpc52xx-psc-i2s"; - reg = <2400 100>; - interrupts = <2 3 0>; - interrupt-parent = <500>; - }; + //i2s@2400 { // PSC3 + // device_type = "sound"; + // compatible = "mpc5200b-psc-i2s"; //not 5200 compatible + // cell-index = <2>; + // reg = <2400 100>; + // interrupts = <2 3 0>; + // interrupt-parent = <500>; + //}; - // PSC4 unconfigured + // PSC4 in uart mode example //serial@2600 { // PSC4 // device_type = "serial"; - // compatible = "mpc5200b-psc-uart\0mpc52xx-psc-uart"; + // compatible = "mpc5200b-psc-uart\0mpc5200-psc-uart"; + // cell-index = <3>; // reg = <2600 100>; // interrupts = <2 b 0>; // interrupt-parent = <500>; //}; - // PSC5 unconfigured + // PSC5 in uart mode example //serial@2800 { // PSC5 // device_type = "serial"; - // compatible = "mpc5200b-psc-uart\0mpc52xx-psc-uart"; + // compatible = "mpc5200b-psc-uart\0mpc5200-psc-uart"; + // cell-index = <4>; // reg = <2800 100>; // interrupts = <2 c 0>; // interrupt-parent = <500>; //}; - // PSC6 in AC97 mode example - ac97@2c00 { // PSC6 - device_type = "sound"; - compatible = "mpc5200b-psc-ac97\0mpc52xx-psc-ac97"; - reg = <2c00 100>; - interrupts = <2 4 0>; - interrupt-parent = <500>; - }; + // PSC6 in spi mode example + //spi@2c00 { // PSC6 + // device_type = "spi"; + // compatible = "mpc5200b-psc-spi\0mpc5200-psc-spi"; + // cell-index = <5>; + // reg = <2c00 100>; + // interrupts = <2 4 0>; + // interrupt-parent = <500>; + //}; ethernet@3000 { device_type = "network"; - compatible = "mpc5200b-fec\0mpc52xx-fec"; + compatible = "mpc5200b-fec\0mpc5200-fec"; reg = <3000 800>; mac-address = [ 02 03 04 05 06 07 ]; // Bad! interrupts = <2 5 0>; @@ -294,7 +315,7 @@ ata@3a00 { device_type = "ata"; - compatible = "mpc5200b-ata\0mpc52xx-ata"; + compatible = "mpc5200b-ata\0mpc5200-ata"; reg = <3a00 100>; interrupts = <2 7 0>; interrupt-parent = <500>; @@ -302,7 +323,8 @@ i2c@3d00 { device_type = "i2c"; - compatible = "mpc5200b-i2c\0mpc52xx-i2c"; + compatible = "mpc5200b-i2c\0mpc5200-i2c"; + cell-index = <0>; reg = <3d00 40>; interrupts = <2 f 0>; interrupt-parent = <500>; @@ -310,14 +332,15 @@ i2c@3d40 { device_type = "i2c"; - compatible = "mpc5200b-i2c\0mpc52xx-i2c"; + compatible = "mpc5200b-i2c\0mpc5200-i2c"; + cell-index = <1>; reg = <3d40 40>; interrupts = <2 10 0>; interrupt-parent = <500>; }; sram@8000 { device_type = "sram"; - compatible = "mpc5200b-sram\0mpc52xx-sram\0sram"; + compatible = "mpc5200b-sram\0mpc5200-sram\0sram"; reg = <8000 4000>; }; }; -- cgit v1.2.3 From 88fd2a9d681f261ebd55a6843a03ea2a1bb9eb39 Mon Sep 17 00:00:00 2001 From: Sylvain Munaut Date: Mon, 12 Feb 2007 23:13:20 +0100 Subject: [POWERPC] Add device tree fixups for the EFIKA We make the efika device tree compliant with the defined bindings (at least compliant enough). This is mostly done by mangling the device_type and compatible properties, but also adding some missing bits. Signed-off-by: Sylvain Munaut Acked-by: Grant Likely Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/prom_init.c | 81 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 81 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index 520ef42f642e..4fb5938ce6d3 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -2117,11 +2117,92 @@ static void __init fixup_device_tree_pmac(void) #define fixup_device_tree_pmac() #endif +#ifdef CONFIG_PPC_EFIKA +/* The current fw of the Efika has a device tree needs quite a few + * fixups to be compliant with the mpc52xx bindings. It's currently + * unknown if it will ever be compliant (come on bPlan ...) so we do fixups. + * NOTE that we (barely) tolerate it because the EFIKA was out before + * the bindings were finished, for any new boards -> RTFM ! */ + +struct subst_entry { + char *path; + char *property; + void *value; + int value_len; +}; + +static void __init fixup_device_tree_efika(void) +{ + /* Substitution table */ + #define prop_cstr(x) x, sizeof(x) + int prop_sound_irq[3] = { 2, 2, 0 }; + int prop_bcomm_irq[3*16] = { 3,0,0, 3,1,0, 3,2,0, 3,3,0, + 3,4,0, 3,5,0, 3,6,0, 3,7,0, + 3,8,0, 3,9,0, 3,10,0, 3,11,0, + 3,12,0, 3,13,0, 3,14,0, 3,15,0 }; + struct subst_entry efika_subst_table[] = { + { "/", "device_type", prop_cstr("efika") }, + { "/builtin", "compatible", prop_cstr("soc") }, + { "/builtin/ata", "compatible", prop_cstr("mpc5200b-ata\0mpc5200-ata"), }, + { "/builtin/bestcomm", "compatible", prop_cstr("mpc5200b-bestcomm\0mpc5200-bestcomm") }, + { "/builtin/bestcomm", "interrupts", prop_bcomm_irq, sizeof(prop_bcomm_irq) }, + { "/builtin/ethernet", "compatible", prop_cstr("mpc5200b-fec\0mpc5200-fec") }, + { "/builtin/pic", "compatible", prop_cstr("mpc5200b-pic\0mpc5200-pic") }, + { "/builtin/serial", "compatible", prop_cstr("mpc5200b-psc-uart\0mpc5200-psc-uart") }, + { "/builtin/sound", "compatible", prop_cstr("mpc5200b-psc-ac97\0mpc5200-psc-ac97") }, + { "/builtin/sound", "interrupts", prop_sound_irq, sizeof(prop_sound_irq) }, + { "/builtin/sram", "compatible", prop_cstr("mpc5200b-sram\0mpc5200-sram") }, + { "/builtin/sram", "device_type", prop_cstr("sram") }, + {} + }; + #undef prop_cstr + + /* Vars */ + u32 node; + char prop[64]; + int rv, i; + + /* Check if we're really running on a EFIKA */ + node = call_prom("finddevice", 1, 1, ADDR("/")); + if (!PHANDLE_VALID(node)) + return; + + rv = prom_getprop(node, "model", prop, sizeof(prop)); + if (rv == PROM_ERROR) + return; + if (strcmp(prop, "EFIKA5K2")) + return; + + prom_printf("Applying EFIKA device tree fixups\n"); + + /* Process substitution table */ + for (i=0; efika_subst_table[i].path; i++) { + struct subst_entry *se = &efika_subst_table[i]; + + node = call_prom("finddevice", 1, 1, ADDR(se->path)); + if (!PHANDLE_VALID(node)) { + prom_printf("fixup_device_tree_efika: ", + "skipped entry %x - not found\n", i); + continue; + } + + rv = prom_setprop(node, se->path, se->property, + se->value, se->value_len ); + if (rv == PROM_ERROR) + prom_printf("fixup_device_tree_efika: ", + "skipped entry %x - setprop error\n", i); + } +} +#else +#define fixup_device_tree_efika() +#endif + static void __init fixup_device_tree(void) { fixup_device_tree_maple(); fixup_device_tree_chrp(); fixup_device_tree_pmac(); + fixup_device_tree_efika(); } static void __init prom_find_boot_cpu(void) -- cgit v1.2.3 From b6a591b2c59935eef5dd31790323ca6014e28f01 Mon Sep 17 00:00:00 2001 From: Sylvain Munaut Date: Mon, 12 Feb 2007 23:13:21 +0100 Subject: [POWERPC] Restore 'proper' link order in platform The 52xx was put before CHRP to allow EFIKA to be recognized properly. Now the efika tree is fixed up in prom_init so no need for this ugly hack. So we restore the 'normal' order. Signed-off-by: Sylvain Munaut Acked-by: Grant Likely Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile index 65e612315b9b..452004283f17 100644 --- a/arch/powerpc/platforms/Makefile +++ b/arch/powerpc/platforms/Makefile @@ -5,9 +5,9 @@ ifeq ($(CONFIG_PPC64),y) obj-$(CONFIG_PPC_PMAC) += powermac/ endif endif -obj-$(CONFIG_PPC_MPC52xx) += 52xx/ obj-$(CONFIG_PPC_CHRP) += chrp/ obj-$(CONFIG_4xx) += 4xx/ +obj-$(CONFIG_PPC_MPC52xx) += 52xx/ obj-$(CONFIG_PPC_8xx) += 8xx/ obj-$(CONFIG_PPC_82xx) += 82xx/ obj-$(CONFIG_PPC_83xx) += 83xx/ -- cgit v1.2.3 From 82a03b92279f2ea80e11dc2c419fdaa3800401a2 Mon Sep 17 00:00:00 2001 From: Sylvain Munaut Date: Mon, 12 Feb 2007 23:13:22 +0100 Subject: [POWERPC] Use common 52xx of_platform probe code for EFIKA Now that the device tree has the good properties, we can remove all the efika_init code by a single call to common code. While we're modifying that file, a few whitespaces/alignement/typo fixes are made (nothing significant). Signed-off-by: Sylvain Munaut Acked-by: Grant Likely Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/52xx/efika-setup.c | 64 +++++++++---------------------- 1 file changed, 18 insertions(+), 46 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/52xx/efika-setup.c b/arch/powerpc/platforms/52xx/efika-setup.c index 110c980ed1e0..d61ce84e201f 100644 --- a/arch/powerpc/platforms/52xx/efika-setup.c +++ b/arch/powerpc/platforms/52xx/efika-setup.c @@ -2,7 +2,7 @@ * * Efika 5K2 platform setup * Some code really inspired from the lite5200b platform. - * + * * Copyright (C) 2006 bplan GmbH * * This file is licensed under the terms of the GNU General Public License @@ -81,35 +81,7 @@ static void __init efika_setup_arch(void) efika_pcisetup(); if (ppc_md.progress) - ppc_md.progress("Linux/PPC " UTS_RELEASE " runnung on Efika ;-)\n", 0x0); -} - -static void __init efika_init(void) -{ - struct device_node *np; - struct device_node *cnp = NULL; - const u32 *base; - - /* Find every child of the SOC node and add it to of_platform */ - np = of_find_node_by_name(NULL, "builtin"); - if (np) { - char name[BUS_ID_SIZE]; - while ((cnp = of_get_next_child(np, cnp))) { - strcpy(name, cnp->name); - - base = get_property(cnp, "reg", NULL); - if (base == NULL) - continue; - - snprintf(name+strlen(name), BUS_ID_SIZE, "@%x", *base); - of_platform_device_create(cnp, name, NULL); - - printk(KERN_INFO EFIKA_PLATFORM_NAME" : Added %s (type '%s' at '%s') to the known devices\n", name, cnp->type, cnp->full_name); - } - } - - if (ppc_md.progress) - ppc_md.progress(" Have fun with your Efika! ", 0x7777); + ppc_md.progress("Linux/PPC " UTS_RELEASE " running on Efika ;-)\n", 0x0); } static int __init efika_probe(void) @@ -131,20 +103,20 @@ static int __init efika_probe(void) define_machine(efika) { - .name = EFIKA_PLATFORM_NAME, - .probe = efika_probe, - .setup_arch = efika_setup_arch, - .init = efika_init, - .show_cpuinfo = efika_show_cpuinfo, - .init_IRQ = mpc52xx_init_irq, - .get_irq = mpc52xx_get_irq, - .restart = rtas_restart, - .power_off = rtas_power_off, - .halt = rtas_halt, - .set_rtc_time = rtas_set_rtc_time, - .get_rtc_time = rtas_get_rtc_time, - .progress = rtas_progress, - .get_boot_time = rtas_get_boot_time, - .calibrate_decr = generic_calibrate_decr, - .phys_mem_access_prot = pci_phys_mem_access_prot, + .name = EFIKA_PLATFORM_NAME, + .probe = efika_probe, + .setup_arch = efika_setup_arch, + .init = mpc52xx_declare_of_platform_devices, + .show_cpuinfo = efika_show_cpuinfo, + .init_IRQ = mpc52xx_init_irq, + .get_irq = mpc52xx_get_irq, + .restart = rtas_restart, + .power_off = rtas_power_off, + .halt = rtas_halt, + .set_rtc_time = rtas_set_rtc_time, + .get_rtc_time = rtas_get_rtc_time, + .progress = rtas_progress, + .get_boot_time = rtas_get_boot_time, + .calibrate_decr = generic_calibrate_decr, + .phys_mem_access_prot = pci_phys_mem_access_prot, }; -- cgit v1.2.3 From 46e4cf6c14e0a5b8916a1236a7079ccad3f4352a Mon Sep 17 00:00:00 2001 From: Sylvain Munaut Date: Mon, 12 Feb 2007 23:13:23 +0100 Subject: [POWERPC] Fix unbalanced of_node_{get,put} in efika-setup.c Signed-off-by: Sylvain Munaut Acked-by: Grant Likely Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/52xx/efika-setup.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/52xx/efika-setup.c b/arch/powerpc/platforms/52xx/efika-setup.c index d61ce84e201f..b6945cbbfba6 100644 --- a/arch/powerpc/platforms/52xx/efika-setup.c +++ b/arch/powerpc/platforms/52xx/efika-setup.c @@ -42,14 +42,13 @@ static void efika_show_cpuinfo(struct seq_file *m) const char *codegenvendor = NULL; root = of_find_node_by_path("/"); - if (root) { - revision = get_property(root, "revision", NULL); - codegendescription = - get_property(root, "CODEGEN,description", NULL); - codegenvendor = get_property(root, "CODEGEN,vendor", NULL); + if (!root) + return; - of_node_put(root); - } + revision = get_property(root, "revision", NULL); + codegendescription = + get_property(root, "CODEGEN,description", NULL); + codegenvendor = get_property(root, "CODEGEN,vendor", NULL); if (codegendescription) seq_printf(m, "machine\t\t: %s\n", codegendescription); -- cgit v1.2.3 From 9724b86f0706ca9b552d82e013cb0c208b4f5529 Mon Sep 17 00:00:00 2001 From: Sylvain Munaut Date: Mon, 12 Feb 2007 23:13:24 +0100 Subject: [POWERPC] Small cleanup of EFIKA platform The efika platform used three files efika-pci.c efika-setup.c and a 2 line efika.h to link the two. The total of code in those is really not much and therefore, I think they're better merged in a single file. There is absolutely _no_code_change_ at all, just merged the files. Signed-off-by: Sylvain Munaut Acked-by: Grant Likely Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/52xx/Makefile | 2 +- arch/powerpc/platforms/52xx/efika-pci.c | 119 --------------- arch/powerpc/platforms/52xx/efika-setup.c | 121 --------------- arch/powerpc/platforms/52xx/efika.c | 243 ++++++++++++++++++++++++++++++ arch/powerpc/platforms/52xx/efika.h | 19 --- 5 files changed, 244 insertions(+), 260 deletions(-) delete mode 100644 arch/powerpc/platforms/52xx/efika-pci.c delete mode 100644 arch/powerpc/platforms/52xx/efika-setup.c create mode 100644 arch/powerpc/platforms/52xx/efika.c delete mode 100644 arch/powerpc/platforms/52xx/efika.h (limited to 'arch') diff --git a/arch/powerpc/platforms/52xx/Makefile b/arch/powerpc/platforms/52xx/Makefile index 795b713ec9ee..07cdbcacf156 100644 --- a/arch/powerpc/platforms/52xx/Makefile +++ b/arch/powerpc/platforms/52xx/Makefile @@ -6,5 +6,5 @@ obj-y += mpc52xx_pic.o mpc52xx_common.o obj-$(CONFIG_PCI) += mpc52xx_pci.o endif -obj-$(CONFIG_PPC_EFIKA) += efika-setup.o efika-pci.o +obj-$(CONFIG_PPC_EFIKA) += efika.o obj-$(CONFIG_PPC_LITE5200) += lite5200.o diff --git a/arch/powerpc/platforms/52xx/efika-pci.c b/arch/powerpc/platforms/52xx/efika-pci.c deleted file mode 100644 index 62e05b2a9227..000000000000 --- a/arch/powerpc/platforms/52xx/efika-pci.c +++ /dev/null @@ -1,119 +0,0 @@ - -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include - -#include "efika.h" - -#ifdef CONFIG_PCI -/* - * Access functions for PCI config space using RTAS calls. - */ -static int rtas_read_config(struct pci_bus *bus, unsigned int devfn, int offset, - int len, u32 * val) -{ - struct pci_controller *hose = bus->sysdata; - unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8) - | (((bus->number - hose->first_busno) & 0xff) << 16) - | (hose->index << 24); - int ret = -1; - int rval; - - rval = rtas_call(rtas_token("read-pci-config"), 2, 2, &ret, addr, len); - *val = ret; - return rval ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; -} - -static int rtas_write_config(struct pci_bus *bus, unsigned int devfn, - int offset, int len, u32 val) -{ - struct pci_controller *hose = bus->sysdata; - unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8) - | (((bus->number - hose->first_busno) & 0xff) << 16) - | (hose->index << 24); - int rval; - - rval = rtas_call(rtas_token("write-pci-config"), 3, 1, NULL, - addr, len, val); - return rval ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; -} - -static struct pci_ops rtas_pci_ops = { - rtas_read_config, - rtas_write_config -}; - -void __init efika_pcisetup(void) -{ - const int *bus_range; - int len; - struct pci_controller *hose; - struct device_node *root; - struct device_node *pcictrl; - - root = of_find_node_by_path("/"); - if (root == NULL) { - printk(KERN_WARNING EFIKA_PLATFORM_NAME - ": Unable to find the root node\n"); - return; - } - - for (pcictrl = NULL;;) { - pcictrl = of_get_next_child(root, pcictrl); - if ((pcictrl == NULL) || (strcmp(pcictrl->name, "pci") == 0)) - break; - } - - of_node_put(root); - - if (pcictrl == NULL) { - printk(KERN_WARNING EFIKA_PLATFORM_NAME - ": Unable to find the PCI bridge node\n"); - return; - } - - bus_range = get_property(pcictrl, "bus-range", &len); - if (bus_range == NULL || len < 2 * sizeof(int)) { - printk(KERN_WARNING EFIKA_PLATFORM_NAME - ": Can't get bus-range for %s\n", pcictrl->full_name); - return; - } - - if (bus_range[1] == bus_range[0]) - printk(KERN_INFO EFIKA_PLATFORM_NAME ": PCI bus %d", - bus_range[0]); - else - printk(KERN_INFO EFIKA_PLATFORM_NAME ": PCI buses %d..%d", - bus_range[0], bus_range[1]); - printk(" controlled by %s\n", pcictrl->full_name); - printk("\n"); - - hose = pcibios_alloc_controller(); - if (!hose) { - printk(KERN_WARNING EFIKA_PLATFORM_NAME - ": Can't allocate PCI controller structure for %s\n", - pcictrl->full_name); - return; - } - - hose->arch_data = of_node_get(pcictrl); - hose->first_busno = bus_range[0]; - hose->last_busno = bus_range[1]; - hose->ops = &rtas_pci_ops; - - pci_process_bridge_OF_ranges(hose, pcictrl, 0); -} - -#else -void __init efika_pcisetup(void) -{} -#endif diff --git a/arch/powerpc/platforms/52xx/efika-setup.c b/arch/powerpc/platforms/52xx/efika-setup.c deleted file mode 100644 index b6945cbbfba6..000000000000 --- a/arch/powerpc/platforms/52xx/efika-setup.c +++ /dev/null @@ -1,121 +0,0 @@ -/* - * - * Efika 5K2 platform setup - * Some code really inspired from the lite5200b platform. - * - * Copyright (C) 2006 bplan GmbH - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include - -#include "efika.h" - -static void efika_show_cpuinfo(struct seq_file *m) -{ - struct device_node *root; - const char *revision = NULL; - const char *codegendescription = NULL; - const char *codegenvendor = NULL; - - root = of_find_node_by_path("/"); - if (!root) - return; - - revision = get_property(root, "revision", NULL); - codegendescription = - get_property(root, "CODEGEN,description", NULL); - codegenvendor = get_property(root, "CODEGEN,vendor", NULL); - - if (codegendescription) - seq_printf(m, "machine\t\t: %s\n", codegendescription); - else - seq_printf(m, "machine\t\t: Efika\n"); - - if (revision) - seq_printf(m, "revision\t: %s\n", revision); - - if (codegenvendor) - seq_printf(m, "vendor\t\t: %s\n", codegenvendor); - - of_node_put(root); -} - -static void __init efika_setup_arch(void) -{ - rtas_initialize(); - -#ifdef CONFIG_BLK_DEV_INITRD - initrd_below_start_ok = 1; - - if (initrd_start) - ROOT_DEV = Root_RAM0; - else -#endif - ROOT_DEV = Root_SDA2; /* sda2 (sda1 is for the kernel) */ - - efika_pcisetup(); - - if (ppc_md.progress) - ppc_md.progress("Linux/PPC " UTS_RELEASE " running on Efika ;-)\n", 0x0); -} - -static int __init efika_probe(void) -{ - char *model = of_get_flat_dt_prop(of_get_flat_dt_root(), - "model", NULL); - - if (model == NULL) - return 0; - if (strcmp(model, "EFIKA5K2")) - return 0; - - ISA_DMA_THRESHOLD = ~0L; - DMA_MODE_READ = 0x44; - DMA_MODE_WRITE = 0x48; - - return 1; -} - -define_machine(efika) -{ - .name = EFIKA_PLATFORM_NAME, - .probe = efika_probe, - .setup_arch = efika_setup_arch, - .init = mpc52xx_declare_of_platform_devices, - .show_cpuinfo = efika_show_cpuinfo, - .init_IRQ = mpc52xx_init_irq, - .get_irq = mpc52xx_get_irq, - .restart = rtas_restart, - .power_off = rtas_power_off, - .halt = rtas_halt, - .set_rtc_time = rtas_set_rtc_time, - .get_rtc_time = rtas_get_rtc_time, - .progress = rtas_progress, - .get_boot_time = rtas_get_boot_time, - .calibrate_decr = generic_calibrate_decr, - .phys_mem_access_prot = pci_phys_mem_access_prot, -}; diff --git a/arch/powerpc/platforms/52xx/efika.c b/arch/powerpc/platforms/52xx/efika.c new file mode 100644 index 000000000000..8de034116681 --- /dev/null +++ b/arch/powerpc/platforms/52xx/efika.c @@ -0,0 +1,243 @@ +/* + * Efika 5K2 platform code + * Some code really inspired from the lite5200b platform. + * + * Copyright (C) 2006 bplan GmbH + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + + +#define EFIKA_PLATFORM_NAME "Efika" + + +/* ------------------------------------------------------------------------ */ +/* PCI accesses thru RTAS */ +/* ------------------------------------------------------------------------ */ + +#ifdef CONFIG_PCI + +/* + * Access functions for PCI config space using RTAS calls. + */ +static int rtas_read_config(struct pci_bus *bus, unsigned int devfn, int offset, + int len, u32 * val) +{ + struct pci_controller *hose = bus->sysdata; + unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8) + | (((bus->number - hose->first_busno) & 0xff) << 16) + | (hose->index << 24); + int ret = -1; + int rval; + + rval = rtas_call(rtas_token("read-pci-config"), 2, 2, &ret, addr, len); + *val = ret; + return rval ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; +} + +static int rtas_write_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 val) +{ + struct pci_controller *hose = bus->sysdata; + unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8) + | (((bus->number - hose->first_busno) & 0xff) << 16) + | (hose->index << 24); + int rval; + + rval = rtas_call(rtas_token("write-pci-config"), 3, 1, NULL, + addr, len, val); + return rval ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops rtas_pci_ops = { + rtas_read_config, + rtas_write_config +}; + + +void __init efika_pcisetup(void) +{ + const int *bus_range; + int len; + struct pci_controller *hose; + struct device_node *root; + struct device_node *pcictrl; + + root = of_find_node_by_path("/"); + if (root == NULL) { + printk(KERN_WARNING EFIKA_PLATFORM_NAME + ": Unable to find the root node\n"); + return; + } + + for (pcictrl = NULL;;) { + pcictrl = of_get_next_child(root, pcictrl); + if ((pcictrl == NULL) || (strcmp(pcictrl->name, "pci") == 0)) + break; + } + + of_node_put(root); + + if (pcictrl == NULL) { + printk(KERN_WARNING EFIKA_PLATFORM_NAME + ": Unable to find the PCI bridge node\n"); + return; + } + + bus_range = get_property(pcictrl, "bus-range", &len); + if (bus_range == NULL || len < 2 * sizeof(int)) { + printk(KERN_WARNING EFIKA_PLATFORM_NAME + ": Can't get bus-range for %s\n", pcictrl->full_name); + return; + } + + if (bus_range[1] == bus_range[0]) + printk(KERN_INFO EFIKA_PLATFORM_NAME ": PCI bus %d", + bus_range[0]); + else + printk(KERN_INFO EFIKA_PLATFORM_NAME ": PCI buses %d..%d", + bus_range[0], bus_range[1]); + printk(" controlled by %s\n", pcictrl->full_name); + printk("\n"); + + hose = pcibios_alloc_controller(); + if (!hose) { + printk(KERN_WARNING EFIKA_PLATFORM_NAME + ": Can't allocate PCI controller structure for %s\n", + pcictrl->full_name); + return; + } + + hose->arch_data = of_node_get(pcictrl); + hose->first_busno = bus_range[0]; + hose->last_busno = bus_range[1]; + hose->ops = &rtas_pci_ops; + + pci_process_bridge_OF_ranges(hose, pcictrl, 0); +} + +#else +void __init efika_pcisetup(void) +{} +#endif + + + +/* ------------------------------------------------------------------------ */ +/* Platform setup */ +/* ------------------------------------------------------------------------ */ + +static void efika_show_cpuinfo(struct seq_file *m) +{ + struct device_node *root; + const char *revision = NULL; + const char *codegendescription = NULL; + const char *codegenvendor = NULL; + + root = of_find_node_by_path("/"); + if (!root) + return; + + revision = get_property(root, "revision", NULL); + codegendescription = + get_property(root, "CODEGEN,description", NULL); + codegenvendor = get_property(root, "CODEGEN,vendor", NULL); + + if (codegendescription) + seq_printf(m, "machine\t\t: %s\n", codegendescription); + else + seq_printf(m, "machine\t\t: Efika\n"); + + if (revision) + seq_printf(m, "revision\t: %s\n", revision); + + if (codegenvendor) + seq_printf(m, "vendor\t\t: %s\n", codegenvendor); + + of_node_put(root); +} + +static void __init efika_setup_arch(void) +{ + rtas_initialize(); + +#ifdef CONFIG_BLK_DEV_INITRD + initrd_below_start_ok = 1; + + if (initrd_start) + ROOT_DEV = Root_RAM0; + else +#endif + ROOT_DEV = Root_SDA2; /* sda2 (sda1 is for the kernel) */ + + efika_pcisetup(); + + if (ppc_md.progress) + ppc_md.progress("Linux/PPC " UTS_RELEASE " running on Efika ;-)\n", 0x0); +} + +static int __init efika_probe(void) +{ + char *model = of_get_flat_dt_prop(of_get_flat_dt_root(), + "model", NULL); + + if (model == NULL) + return 0; + if (strcmp(model, "EFIKA5K2")) + return 0; + + ISA_DMA_THRESHOLD = ~0L; + DMA_MODE_READ = 0x44; + DMA_MODE_WRITE = 0x48; + + return 1; +} + +define_machine(efika) +{ + .name = EFIKA_PLATFORM_NAME, + .probe = efika_probe, + .setup_arch = efika_setup_arch, + .init = mpc52xx_declare_of_platform_devices, + .show_cpuinfo = efika_show_cpuinfo, + .init_IRQ = mpc52xx_init_irq, + .get_irq = mpc52xx_get_irq, + .restart = rtas_restart, + .power_off = rtas_power_off, + .halt = rtas_halt, + .set_rtc_time = rtas_set_rtc_time, + .get_rtc_time = rtas_get_rtc_time, + .progress = rtas_progress, + .get_boot_time = rtas_get_boot_time, + .calibrate_decr = generic_calibrate_decr, + .phys_mem_access_prot = pci_phys_mem_access_prot, +}; + diff --git a/arch/powerpc/platforms/52xx/efika.h b/arch/powerpc/platforms/52xx/efika.h deleted file mode 100644 index 2f060fd097d7..000000000000 --- a/arch/powerpc/platforms/52xx/efika.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Efika 5K2 platform setup - Header file - * - * Copyright (C) 2006 bplan GmbH - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - * - */ - -#ifndef __ARCH_POWERPC_EFIKA__ -#define __ARCH_POWERPC_EFIKA__ - -#define EFIKA_PLATFORM_NAME "Efika" - -extern void __init efika_pcisetup(void); - -#endif -- cgit v1.2.3 From 78bde53e351bc89cff85d1c2c7e6d7c2ffdf120d Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 13 Feb 2007 11:46:06 +1100 Subject: [POWERPC] spufs: remove need for struct page for SPEs This patch removes the need for struct page for SPE local store and registers from spufs. It also makes the locking much more obvious and no longer relying on the truncate logic black magic for protecting against races between unmap_mapping_range() and new pages faulted in. It does so by switching to a nopfn() handler and using the new vm_insert_pfn() to setup the PTEs itself while holding a lock on the SPE. The nice thing is that this patch actually removes a lot more code than it adds :-) Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/Kconfig | 2 +- arch/powerpc/platforms/cell/spu_manage.c | 102 ++++++-------------------- arch/powerpc/platforms/cell/spufs/file.c | 121 ++++++++++++++----------------- 3 files changed, 80 insertions(+), 145 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 0088c5ebca78..340d9beab6d1 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -876,7 +876,7 @@ config ARCH_SPARSEMEM_ENABLE config ARCH_SPARSEMEM_DEFAULT def_bool y - depends on (SMP && PPC_PSERIES) || PPC_CELL + depends on (SMP && PPC_PSERIES) || PPC_PS3 config ARCH_POPULATES_NODE_MAP def_bool y diff --git a/arch/powerpc/platforms/cell/spu_manage.c b/arch/powerpc/platforms/cell/spu_manage.c index d8b39fe39cdd..e34599f53d28 100644 --- a/arch/powerpc/platforms/cell/spu_manage.c +++ b/arch/powerpc/platforms/cell/spu_manage.c @@ -59,63 +59,6 @@ static u64 __init find_spu_unit_number(struct device_node *spe) return 0; } -static int __init cell_spuprop_present(struct spu *spu, struct device_node *spe, - const char *prop) -{ - const struct address_prop { - unsigned long address; - unsigned int len; - } __attribute__((packed)) *p; - int proplen; - - unsigned long start_pfn, nr_pages; - struct pglist_data *pgdata; - struct zone *zone; - int ret; - - p = get_property(spe, prop, &proplen); - WARN_ON(proplen != sizeof (*p)); - - start_pfn = p->address >> PAGE_SHIFT; - nr_pages = ((unsigned long)p->len + PAGE_SIZE - 1) >> PAGE_SHIFT; - - pgdata = NODE_DATA(spu->node); - zone = pgdata->node_zones; - - ret = __add_pages(zone, start_pfn, nr_pages); - - return ret; -} - -static void __iomem * __init map_spe_prop(struct spu *spu, - struct device_node *n, const char *name) -{ - const struct address_prop { - unsigned long address; - unsigned int len; - } __attribute__((packed)) *prop; - - const void *p; - int proplen; - void __iomem *ret = NULL; - int err = 0; - - p = get_property(n, name, &proplen); - if (proplen != sizeof (struct address_prop)) - return NULL; - - prop = p; - - err = cell_spuprop_present(spu, n, name); - if (err && (err != -EEXIST)) - goto out; - - ret = ioremap(prop->address, prop->len); - - out: - return ret; -} - static void spu_unmap(struct spu *spu) { if (!firmware_has_feature(FW_FEATURE_LPAR)) @@ -157,6 +100,23 @@ static int __init spu_map_interrupts_old(struct spu *spu, return spu->irqs[2] == NO_IRQ ? -EINVAL : 0; } +static void __iomem * __init spu_map_prop_old(struct spu *spu, + struct device_node *n, + const char *name) +{ + const struct address_prop { + unsigned long address; + unsigned int len; + } __attribute__((packed)) *prop; + int proplen; + + prop = get_property(n, name, &proplen); + if (prop == NULL || proplen != sizeof (struct address_prop)) + return NULL; + + return ioremap(prop->address, prop->len); +} + static int __init spu_map_device_old(struct spu *spu) { struct device_node *node = spu->devnode; @@ -175,7 +135,7 @@ static int __init spu_map_device_old(struct spu *spu) /* we use local store as ram, not io memory */ spu->local_store = (void __force *) - map_spe_prop(spu, node, "local-store"); + spu_map_prop_old(spu, node, "local-store"); if (!spu->local_store) goto out; @@ -184,16 +144,16 @@ static int __init spu_map_device_old(struct spu *spu) goto out_unmap; spu->problem_phys = *(unsigned long *)prop; - spu->problem = map_spe_prop(spu, node, "problem"); + spu->problem = spu_map_prop_old(spu, node, "problem"); if (!spu->problem) goto out_unmap; - spu->priv2 = map_spe_prop(spu, node, "priv2"); + spu->priv2 = spu_map_prop_old(spu, node, "priv2"); if (!spu->priv2) goto out_unmap; if (!firmware_has_feature(FW_FEATURE_LPAR)) { - spu->priv1 = map_spe_prop(spu, node, "priv1"); + spu->priv1 = spu_map_prop_old(spu, node, "priv1"); if (!spu->priv1) goto out_unmap; } @@ -245,34 +205,20 @@ static int spu_map_resource(struct spu *spu, int nr, void __iomem** virt, unsigned long *phys) { struct device_node *np = spu->devnode; - unsigned long start_pfn, nr_pages; - struct pglist_data *pgdata; - struct zone *zone; struct resource resource = { }; unsigned long len; int ret; ret = of_address_to_resource(np, nr, &resource); if (ret) - goto out; - + return ret; if (phys) *phys = resource.start; len = resource.end - resource.start + 1; *virt = ioremap(resource.start, len); if (!*virt) - ret = -EINVAL; - - start_pfn = resource.start >> PAGE_SHIFT; - nr_pages = (len + PAGE_SIZE - 1) >> PAGE_SHIFT; - - pgdata = NODE_DATA(spu->node); - zone = pgdata->node_zones; - - ret = __add_pages(zone, start_pfn, nr_pages); - -out: - return ret; + return -EINVAL; + return 0; } static int __init spu_map_device(struct spu *spu) diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c index af9e9455a706..7fb9a6dc4f18 100644 --- a/arch/powerpc/platforms/cell/spufs/file.c +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -95,14 +95,12 @@ spufs_mem_write(struct file *file, const char __user *buffer, return ret; } -static struct page * -spufs_mem_mmap_nopage(struct vm_area_struct *vma, - unsigned long address, int *type) +static unsigned long spufs_mem_mmap_nopfn(struct vm_area_struct *vma, + unsigned long address) { - struct page *page = NOPAGE_SIGBUS; - struct spu_context *ctx = vma->vm_file->private_data; - unsigned long offset = address - vma->vm_start; + unsigned long pfn, offset = address - vma->vm_start; + offset += vma->vm_pgoff << PAGE_SHIFT; spu_acquire(ctx); @@ -110,24 +108,22 @@ spufs_mem_mmap_nopage(struct vm_area_struct *vma, if (ctx->state == SPU_STATE_SAVED) { vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) & ~_PAGE_NO_CACHE); - page = vmalloc_to_page(ctx->csa.lscsa->ls + offset); + pfn = vmalloc_to_pfn(ctx->csa.lscsa->ls + offset); } else { vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) - | _PAGE_NO_CACHE); - page = pfn_to_page((ctx->spu->local_store_phys + offset) - >> PAGE_SHIFT); + | _PAGE_NO_CACHE); + pfn = (ctx->spu->local_store_phys + offset) >> PAGE_SHIFT; } - spu_release(ctx); + vm_insert_pfn(vma, address, pfn); - if (type) - *type = VM_FAULT_MINOR; + spu_release(ctx); - page_cache_get(page); - return page; + return NOPFN_REFAULT; } + static struct vm_operations_struct spufs_mem_mmap_vmops = { - .nopage = spufs_mem_mmap_nopage, + .nopfn = spufs_mem_mmap_nopfn, }; static int @@ -136,7 +132,7 @@ spufs_mem_mmap(struct file *file, struct vm_area_struct *vma) if (!(vma->vm_flags & VM_SHARED)) return -EINVAL; - vma->vm_flags |= VM_IO; + vma->vm_flags |= VM_IO | VM_PFNMAP; vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) | _PAGE_NO_CACHE); @@ -152,49 +148,42 @@ static const struct file_operations spufs_mem_fops = { .mmap = spufs_mem_mmap, }; -static struct page *spufs_ps_nopage(struct vm_area_struct *vma, +static unsigned long spufs_ps_nopfn(struct vm_area_struct *vma, unsigned long address, - int *type, unsigned long ps_offs, + unsigned long ps_offs, unsigned long ps_size) { - struct page *page = NOPAGE_SIGBUS; - int fault_type = VM_FAULT_SIGBUS; struct spu_context *ctx = vma->vm_file->private_data; - unsigned long offset = address - vma->vm_start; - unsigned long area; + unsigned long area, offset = address - vma->vm_start; int ret; offset += vma->vm_pgoff << PAGE_SHIFT; if (offset >= ps_size) - goto out; + return NOPFN_SIGBUS; + /* error here usually means a signal.. we might want to test + * the error code more precisely though + */ ret = spu_acquire_runnable(ctx); if (ret) - goto out; + return NOPFN_REFAULT; area = ctx->spu->problem_phys + ps_offs; - page = pfn_to_page((area + offset) >> PAGE_SHIFT); - fault_type = VM_FAULT_MINOR; - page_cache_get(page); - + vm_insert_pfn(vma, address, (area + offset) >> PAGE_SHIFT); spu_release(ctx); - out: - if (type) - *type = fault_type; - - return page; + return NOPFN_REFAULT; } #if SPUFS_MMAP_4K -static struct page *spufs_cntl_mmap_nopage(struct vm_area_struct *vma, - unsigned long address, int *type) +static unsigned long spufs_cntl_mmap_nopfn(struct vm_area_struct *vma, + unsigned long address) { - return spufs_ps_nopage(vma, address, type, 0x4000, 0x1000); + return spufs_ps_nopfn(vma, address, 0x4000, 0x1000); } static struct vm_operations_struct spufs_cntl_mmap_vmops = { - .nopage = spufs_cntl_mmap_nopage, + .nopfn = spufs_cntl_mmap_nopfn, }; /* @@ -205,7 +194,7 @@ static int spufs_cntl_mmap(struct file *file, struct vm_area_struct *vma) if (!(vma->vm_flags & VM_SHARED)) return -EINVAL; - vma->vm_flags |= VM_IO; + vma->vm_flags |= VM_IO | VM_PFNMAP; vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) | _PAGE_NO_CACHE | _PAGE_GUARDED); @@ -791,23 +780,23 @@ static ssize_t spufs_signal1_write(struct file *file, const char __user *buf, return 4; } -static struct page *spufs_signal1_mmap_nopage(struct vm_area_struct *vma, - unsigned long address, int *type) +static unsigned long spufs_signal1_mmap_nopfn(struct vm_area_struct *vma, + unsigned long address) { #if PAGE_SIZE == 0x1000 - return spufs_ps_nopage(vma, address, type, 0x14000, 0x1000); + return spufs_ps_nopfn(vma, address, 0x14000, 0x1000); #elif PAGE_SIZE == 0x10000 /* For 64k pages, both signal1 and signal2 can be used to mmap the whole * signal 1 and 2 area */ - return spufs_ps_nopage(vma, address, type, 0x10000, 0x10000); + return spufs_ps_nopfn(vma, address, 0x10000, 0x10000); #else #error unsupported page size #endif } static struct vm_operations_struct spufs_signal1_mmap_vmops = { - .nopage = spufs_signal1_mmap_nopage, + .nopfn = spufs_signal1_mmap_nopfn, }; static int spufs_signal1_mmap(struct file *file, struct vm_area_struct *vma) @@ -815,7 +804,7 @@ static int spufs_signal1_mmap(struct file *file, struct vm_area_struct *vma) if (!(vma->vm_flags & VM_SHARED)) return -EINVAL; - vma->vm_flags |= VM_IO; + vma->vm_flags |= VM_IO | VM_PFNMAP; vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) | _PAGE_NO_CACHE | _PAGE_GUARDED); @@ -899,23 +888,23 @@ static ssize_t spufs_signal2_write(struct file *file, const char __user *buf, } #if SPUFS_MMAP_4K -static struct page *spufs_signal2_mmap_nopage(struct vm_area_struct *vma, - unsigned long address, int *type) +static unsigned long spufs_signal2_mmap_nopfn(struct vm_area_struct *vma, + unsigned long address) { #if PAGE_SIZE == 0x1000 - return spufs_ps_nopage(vma, address, type, 0x1c000, 0x1000); + return spufs_ps_nopfn(vma, address, 0x1c000, 0x1000); #elif PAGE_SIZE == 0x10000 /* For 64k pages, both signal1 and signal2 can be used to mmap the whole * signal 1 and 2 area */ - return spufs_ps_nopage(vma, address, type, 0x10000, 0x10000); + return spufs_ps_nopfn(vma, address, 0x10000, 0x10000); #else #error unsupported page size #endif } static struct vm_operations_struct spufs_signal2_mmap_vmops = { - .nopage = spufs_signal2_mmap_nopage, + .nopfn = spufs_signal2_mmap_nopfn, }; static int spufs_signal2_mmap(struct file *file, struct vm_area_struct *vma) @@ -923,7 +912,7 @@ static int spufs_signal2_mmap(struct file *file, struct vm_area_struct *vma) if (!(vma->vm_flags & VM_SHARED)) return -EINVAL; - vma->vm_flags |= VM_IO; + vma->vm_flags |= VM_IO | VM_PFNMAP; vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) | _PAGE_NO_CACHE | _PAGE_GUARDED); @@ -1000,14 +989,14 @@ DEFINE_SIMPLE_ATTRIBUTE(spufs_signal2_type, spufs_signal2_type_get, spufs_signal2_type_set, "%llu"); #if SPUFS_MMAP_4K -static struct page *spufs_mss_mmap_nopage(struct vm_area_struct *vma, - unsigned long address, int *type) +static unsigned long spufs_mss_mmap_nopfn(struct vm_area_struct *vma, + unsigned long address) { - return spufs_ps_nopage(vma, address, type, 0x0000, 0x1000); + return spufs_ps_nopfn(vma, address, 0x0000, 0x1000); } static struct vm_operations_struct spufs_mss_mmap_vmops = { - .nopage = spufs_mss_mmap_nopage, + .nopfn = spufs_mss_mmap_nopfn, }; /* @@ -1018,7 +1007,7 @@ static int spufs_mss_mmap(struct file *file, struct vm_area_struct *vma) if (!(vma->vm_flags & VM_SHARED)) return -EINVAL; - vma->vm_flags |= VM_IO; + vma->vm_flags |= VM_IO | VM_PFNMAP; vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) | _PAGE_NO_CACHE | _PAGE_GUARDED); @@ -1042,14 +1031,14 @@ static const struct file_operations spufs_mss_fops = { .mmap = spufs_mss_mmap, }; -static struct page *spufs_psmap_mmap_nopage(struct vm_area_struct *vma, - unsigned long address, int *type) +static unsigned long spufs_psmap_mmap_nopfn(struct vm_area_struct *vma, + unsigned long address) { - return spufs_ps_nopage(vma, address, type, 0x0000, 0x20000); + return spufs_ps_nopfn(vma, address, 0x0000, 0x20000); } static struct vm_operations_struct spufs_psmap_mmap_vmops = { - .nopage = spufs_psmap_mmap_nopage, + .nopfn = spufs_psmap_mmap_nopfn, }; /* @@ -1060,7 +1049,7 @@ static int spufs_psmap_mmap(struct file *file, struct vm_area_struct *vma) if (!(vma->vm_flags & VM_SHARED)) return -EINVAL; - vma->vm_flags |= VM_IO; + vma->vm_flags |= VM_IO | VM_PFNMAP; vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) | _PAGE_NO_CACHE | _PAGE_GUARDED); @@ -1083,14 +1072,14 @@ static const struct file_operations spufs_psmap_fops = { #if SPUFS_MMAP_4K -static struct page *spufs_mfc_mmap_nopage(struct vm_area_struct *vma, - unsigned long address, int *type) +static unsigned long spufs_mfc_mmap_nopfn(struct vm_area_struct *vma, + unsigned long address) { - return spufs_ps_nopage(vma, address, type, 0x3000, 0x1000); + return spufs_ps_nopfn(vma, address, 0x3000, 0x1000); } static struct vm_operations_struct spufs_mfc_mmap_vmops = { - .nopage = spufs_mfc_mmap_nopage, + .nopfn = spufs_mfc_mmap_nopfn, }; /* @@ -1101,7 +1090,7 @@ static int spufs_mfc_mmap(struct file *file, struct vm_area_struct *vma) if (!(vma->vm_flags & VM_SHARED)) return -EINVAL; - vma->vm_flags |= VM_IO; + vma->vm_flags |= VM_IO | VM_PFNMAP; vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) | _PAGE_NO_CACHE | _PAGE_GUARDED); -- cgit v1.2.3 From 44430e0d3916ab6aaf0451fdb811f4f1803b741e Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 13 Feb 2007 11:46:07 +1100 Subject: [POWERPC] powerpc: Remove SPU struct pages for PS3 Struct page are no longer needed for SPUs, so let's not create them on PS3 anymore. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/ps3/spu.c | 42 ++-------------------------------------- 1 file changed, 2 insertions(+), 40 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/ps3/spu.c b/arch/powerpc/platforms/ps3/spu.c index d1929721b0e4..a397e4e17c13 100644 --- a/arch/powerpc/platforms/ps3/spu.c +++ b/arch/powerpc/platforms/ps3/spu.c @@ -170,31 +170,6 @@ static int __init construct_spu(struct spu *spu) return result; } -static int __init add_spu_pages(unsigned long start_addr, unsigned long size) -{ - int result; - unsigned long start_pfn; - unsigned long nr_pages; - struct pglist_data *pgdata; - struct zone *zone; - - BUG_ON(!mem_init_done); - - start_pfn = start_addr >> PAGE_SHIFT; - nr_pages = (size + PAGE_SIZE - 1) >> PAGE_SHIFT; - - pgdata = NODE_DATA(0); - zone = pgdata->node_zones; - - result = __add_pages(zone, start_pfn, nr_pages); - - if (result) - pr_debug("%s:%d: __add_pages failed: (%d)\n", - __func__, __LINE__, result); - - return result; -} - static void spu_unmap(struct spu *spu) { iounmap(spu->priv2); @@ -206,19 +181,6 @@ static void spu_unmap(struct spu *spu) static int __init setup_areas(struct spu *spu) { struct table {char* name; unsigned long addr; unsigned long size;}; - int result; - - /* setup pages */ - - result = add_spu_pages(spu->local_store_phys, LS_SIZE); - if (result) - goto fail_add; - - result = add_spu_pages(spu->problem_phys, sizeof(struct spu_problem)); - if (result) - goto fail_add; - - /* ioremap */ spu_pdata(spu)->shadow = __ioremap( spu_pdata(spu)->shadow_addr, sizeof(struct spe_shadow), @@ -260,8 +222,8 @@ static int __init setup_areas(struct spu *spu) fail_ioremap: spu_unmap(spu); -fail_add: - return result; + + return -ENOMEM; } static int __init setup_interrupts(struct spu *spu) -- cgit v1.2.3 From 17e0e27020d028a790d97699aff85a43af5be472 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 13 Feb 2007 11:46:08 +1100 Subject: [POWERPC] spufs: Fix bitrot of the SPU mmap facility It looks like we've had some serious bitrot there mostly due to tracking of address_space's of mmap'ed files getting out of sync with the actual mmap code. The mfc, mss and psmap were not tracked properly and thus not invalidated on context switches (oops !) I also removed the various file->f_mapping = inode->i_mapping; assignments that were done in the other open() routines since that is already done for us by __dentry_open. One improvement we might want to do later is to assign the various ctx-> fields at mmap time instead of file open/close time so that we don't call unmap_mapping_range() on thing that have not been mmap'ed Finally, I added some smp_wmb's after assigning the ctx-> fields to make sure they are visible to other CPUs. I don't think this is really necessary as I suspect locking in the fs layer will make that happen anyway but better safe than sorry. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/spufs/context.c | 12 ++++++++---- arch/powerpc/platforms/cell/spufs/file.c | 16 ++++++++++++---- arch/powerpc/platforms/cell/spufs/spufs.h | 2 ++ 3 files changed, 22 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c index 0870009f56db..28c718ca3b51 100644 --- a/arch/powerpc/platforms/cell/spufs/context.c +++ b/arch/powerpc/platforms/cell/spufs/context.c @@ -111,13 +111,17 @@ void spu_unmap_mappings(struct spu_context *ctx) if (ctx->local_store) unmap_mapping_range(ctx->local_store, 0, LS_SIZE, 1); if (ctx->mfc) - unmap_mapping_range(ctx->mfc, 0, 0x4000, 1); + unmap_mapping_range(ctx->mfc, 0, 0x1000, 1); if (ctx->cntl) - unmap_mapping_range(ctx->cntl, 0, 0x4000, 1); + unmap_mapping_range(ctx->cntl, 0, 0x1000, 1); if (ctx->signal1) - unmap_mapping_range(ctx->signal1, 0, 0x4000, 1); + unmap_mapping_range(ctx->signal1, 0, PAGE_SIZE, 1); if (ctx->signal2) - unmap_mapping_range(ctx->signal2, 0, 0x4000, 1); + unmap_mapping_range(ctx->signal2, 0, PAGE_SIZE, 1); + if (ctx->mss) + unmap_mapping_range(ctx->mss, 0, 0x1000, 1); + if (ctx->psmap) + unmap_mapping_range(ctx->psmap, 0, 0x20000, 1); } int spu_acquire_exclusive(struct spu_context *ctx) diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c index 7fb9a6dc4f18..a528020baa18 100644 --- a/arch/powerpc/platforms/cell/spufs/file.c +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -45,8 +45,8 @@ spufs_mem_open(struct inode *inode, struct file *file) struct spufs_inode_info *i = SPUFS_I(inode); struct spu_context *ctx = i->i_ctx; file->private_data = ctx; - file->f_mapping = inode->i_mapping; ctx->local_store = inode->i_mapping; + smp_wmb(); return 0; } @@ -232,8 +232,8 @@ static int spufs_cntl_open(struct inode *inode, struct file *file) struct spu_context *ctx = i->i_ctx; file->private_data = ctx; - file->f_mapping = inode->i_mapping; ctx->cntl = inode->i_mapping; + smp_wmb(); return simple_attr_open(inode, file, spufs_cntl_get, spufs_cntl_set, "0x%08lx"); } @@ -717,8 +717,8 @@ static int spufs_signal1_open(struct inode *inode, struct file *file) struct spufs_inode_info *i = SPUFS_I(inode); struct spu_context *ctx = i->i_ctx; file->private_data = ctx; - file->f_mapping = inode->i_mapping; ctx->signal1 = inode->i_mapping; + smp_wmb(); return nonseekable_open(inode, file); } @@ -824,8 +824,8 @@ static int spufs_signal2_open(struct inode *inode, struct file *file) struct spufs_inode_info *i = SPUFS_I(inode); struct spu_context *ctx = i->i_ctx; file->private_data = ctx; - file->f_mapping = inode->i_mapping; ctx->signal2 = inode->i_mapping; + smp_wmb(); return nonseekable_open(inode, file); } @@ -1021,8 +1021,11 @@ static int spufs_mss_mmap(struct file *file, struct vm_area_struct *vma) static int spufs_mss_open(struct inode *inode, struct file *file) { struct spufs_inode_info *i = SPUFS_I(inode); + struct spu_context *ctx = i->i_ctx; file->private_data = i->i_ctx; + ctx->mss = inode->i_mapping; + smp_wmb(); return nonseekable_open(inode, file); } @@ -1060,8 +1063,11 @@ static int spufs_psmap_mmap(struct file *file, struct vm_area_struct *vma) static int spufs_psmap_open(struct inode *inode, struct file *file) { struct spufs_inode_info *i = SPUFS_I(inode); + struct spu_context *ctx = i->i_ctx; file->private_data = i->i_ctx; + ctx->psmap = inode->i_mapping; + smp_wmb(); return nonseekable_open(inode, file); } @@ -1114,6 +1120,8 @@ static int spufs_mfc_open(struct inode *inode, struct file *file) return -EBUSY; file->private_data = ctx; + ctx->mfc = inode->i_mapping; + smp_wmb(); return nonseekable_open(inode, file); } diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h index 56864469215e..0941c56df9b5 100644 --- a/arch/powerpc/platforms/cell/spufs/spufs.h +++ b/arch/powerpc/platforms/cell/spufs/spufs.h @@ -51,6 +51,8 @@ struct spu_context { struct address_space *cntl; /* 'control' area mappings. */ struct address_space *signal1; /* 'signal1' area mappings. */ struct address_space *signal2; /* 'signal2' area mappings. */ + struct address_space *mss; /* 'mss' area mappings. */ + struct address_space *psmap; /* 'psmap' area mappings. */ u64 object_id; /* user space pointer for oprofile */ enum { SPU_STATE_RUNNABLE, SPU_STATE_SAVED } state; -- cgit v1.2.3 From 3b4d9539628502768fe7f8fd4b48f2fbf2426255 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 13 Feb 2007 15:42:28 +0900 Subject: sh: heartbeat consolidation for banked LEDs. This consolidates the various board heartbeat LED implementations, used for strobing the load average across a LED bank. Those boards not implementing a full bank can hook in via the LED class. We leave the compat hook in the machvec for now until those non-banked boards are able to migrate to the drivers/leds. Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 3 +- arch/sh/boards/mpc1211/Makefile | 2 +- arch/sh/boards/mpc1211/led.c | 63 ------------------------------ arch/sh/boards/mpc1211/setup.c | 31 +++++++++++++-- arch/sh/boards/renesas/r7780rp/Makefile | 1 - arch/sh/boards/renesas/r7780rp/led.c | 43 -------------------- arch/sh/boards/renesas/r7780rp/setup.c | 25 ++++++++++-- arch/sh/boards/renesas/rts7751r2d/Makefile | 1 - arch/sh/boards/renesas/rts7751r2d/led.c | 44 --------------------- arch/sh/boards/renesas/rts7751r2d/setup.c | 19 +++++++-- arch/sh/boards/se/7206/Makefile | 2 - arch/sh/boards/se/7206/led.c | 57 --------------------------- arch/sh/boards/se/7206/setup.c | 34 ++++++++++++---- arch/sh/boards/se/7300/Makefile | 2 - arch/sh/boards/se/7300/led.c | 54 ------------------------- arch/sh/boards/se/7300/setup.c | 36 ++++++++++++++--- arch/sh/boards/se/73180/Makefile | 2 - arch/sh/boards/se/73180/led.c | 53 ------------------------- arch/sh/boards/se/73180/setup.c | 31 +++++++++++++-- arch/sh/boards/se/7343/Makefile | 2 - arch/sh/boards/se/7343/led.c | 44 --------------------- arch/sh/boards/se/7343/setup.c | 26 ++++++++---- arch/sh/boards/se/770x/Makefile | 1 - arch/sh/boards/se/770x/led.c | 52 ------------------------ arch/sh/boards/se/770x/setup.c | 35 +++++++++++++++-- arch/sh/boards/se/7751/Makefile | 1 - arch/sh/boards/se/7751/led.c | 51 ------------------------ arch/sh/boards/se/7751/setup.c | 36 ++++++++++++++--- arch/sh/boards/sh03/Makefile | 1 - arch/sh/boards/sh03/led.c | 48 ----------------------- arch/sh/boards/sh03/setup.c | 30 ++++++++++++-- arch/sh/drivers/Makefile | 1 + 32 files changed, 260 insertions(+), 571 deletions(-) delete mode 100644 arch/sh/boards/mpc1211/led.c delete mode 100644 arch/sh/boards/renesas/r7780rp/led.c delete mode 100644 arch/sh/boards/renesas/rts7751r2d/led.c delete mode 100644 arch/sh/boards/se/7206/led.c delete mode 100644 arch/sh/boards/se/7300/led.c delete mode 100644 arch/sh/boards/se/73180/led.c delete mode 100644 arch/sh/boards/se/7343/led.c delete mode 100644 arch/sh/boards/se/770x/led.c delete mode 100644 arch/sh/boards/se/7751/led.c delete mode 100644 arch/sh/boards/sh03/led.c (limited to 'arch') diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index d18310ab4c70..90c8c42e7e8b 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -512,7 +512,8 @@ config HEARTBEAT bool "Heartbeat LED" depends on SH_MPC1211 || SH_SH03 || \ SH_BIGSUR || SOLUTION_ENGINE || \ - SH_RTS7751R2D || SH_SH4202_MICRODEV || SH_LANDISK + SH_RTS7751R2D || SH_SH4202_MICRODEV || SH_LANDISK || \ + SH_R7780RP help Use the power-on LED on your machine as a load meter. The exact behavior is platform-dependent, but normally the flash frequency is diff --git a/arch/sh/boards/mpc1211/Makefile b/arch/sh/boards/mpc1211/Makefile index 1644ebed78cb..8cd31b5d200b 100644 --- a/arch/sh/boards/mpc1211/Makefile +++ b/arch/sh/boards/mpc1211/Makefile @@ -2,7 +2,7 @@ # Makefile for the Interface (CTP/PCI/MPC-SH02) specific parts of the kernel # -obj-y := setup.o rtc.o led.o +obj-y := setup.o rtc.o obj-$(CONFIG_PCI) += pci.o diff --git a/arch/sh/boards/mpc1211/led.c b/arch/sh/boards/mpc1211/led.c deleted file mode 100644 index 8df1591823d6..000000000000 --- a/arch/sh/boards/mpc1211/led.c +++ /dev/null @@ -1,63 +0,0 @@ -/* - * linux/arch/sh/boards/mpc1211/led.c - * - * Copyright (C) 2001 Saito.K & Jeanne - * - * This file contains Interface MPC-1211 specific LED code. - */ - - -static void mach_led(int position, int value) -{ - volatile unsigned char* p = (volatile unsigned char*)0xa2000000; - - if (value) { - *p |= 1; - } else { - *p &= ~1; - } -} - -#ifdef CONFIG_HEARTBEAT - -#include - -/* Cycle the LED's in the clasic Knightrider/Sun pattern */ -void heartbeat_mpc1211(void) -{ - static unsigned int cnt = 0, period = 0; - volatile unsigned char* p = (volatile unsigned char*)0xa2000000; - static unsigned bit = 0, up = 1; - - cnt += 1; - if (cnt < period) { - return; - } - - cnt = 0; - - /* Go through the points (roughly!): - * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110 - */ - period = 110 - ( (300< #include #include +#include #include #include #include @@ -281,6 +282,32 @@ static int put_smb_blk(unsigned char *p, int address, int command, int no) return 0; } +static struct resource heartbeat_resources[] = { + [0] = { + .start = 0xa2000000, + .end = 0xa2000000 + 8 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + +static struct platform_device *mpc1211_devices[] __initdata = { + &heartbeat_device, +}; + +static int __init mpc1211_devices_setup(void) +{ + return platform_add_devices(mpc1211_devices, + ARRAY_SIZE(mpc1211_devices)); +} +__initcall(mpc1211_devices_setup); + /* arch/sh/boards/mpc1211/rtc.c */ void mpc1211_time_init(void); @@ -317,9 +344,5 @@ struct sh_machine_vector mv_mpc1211 __initmv = { .mv_nr_irqs = 48, .mv_irq_demux = mpc1211_irq_demux, .mv_init_irq = init_mpc1211_IRQ, - -#ifdef CONFIG_HEARTBEAT - .mv_heartbeat = heartbeat_mpc1211, -#endif }; ALIAS_MV(mpc1211) diff --git a/arch/sh/boards/renesas/r7780rp/Makefile b/arch/sh/boards/renesas/r7780rp/Makefile index 574b0316ed56..3c93012e91a3 100644 --- a/arch/sh/boards/renesas/r7780rp/Makefile +++ b/arch/sh/boards/renesas/r7780rp/Makefile @@ -4,5 +4,4 @@ obj-y := setup.o io.o irq.o -obj-$(CONFIG_HEARTBEAT) += led.o obj-$(CONFIG_PUSH_SWITCH) += psw.o diff --git a/arch/sh/boards/renesas/r7780rp/led.c b/arch/sh/boards/renesas/r7780rp/led.c deleted file mode 100644 index 6a00a257afd2..000000000000 --- a/arch/sh/boards/renesas/r7780rp/led.c +++ /dev/null @@ -1,43 +0,0 @@ -/* - * Copyright (C) Atom Create Engineering Co., Ltd. - * - * May be copied or modified under the terms of GNU General Public - * License. See linux/COPYING for more information. - * - * This file contains Renesas Solutions HIGHLANDER R7780RP-1 specific LED code. - */ -#include -#include -#include - -/* Cycle the LED's in the clasic Knightriger/Sun pattern */ -void heartbeat_r7780rp(void) -{ - static unsigned int cnt = 0, period = 0; - volatile unsigned short *p = (volatile unsigned short *)PA_OBLED; - static unsigned bit = 0, up = 1; - unsigned bit_pos[] = {2, 1, 0, 3, 6, 5, 4, 7}; - - cnt += 1; - if (cnt < period) - return; - - cnt = 0; - - /* Go through the points (roughly!): - * f(0)=10, f(1)=16, f(2)=20, f(5)=35, f(int)->110 - */ - period = 110 - ((300 << FSHIFT)/((avenrun[0]/5) + (3< #include -extern void heartbeat_r7780rp(void); extern void init_r7780rp_IRQ(void); static struct resource m66596_usb_host_resources[] = { @@ -72,9 +71,30 @@ static struct platform_device cf_ide_device = { .resource = cf_ide_resources, }; +static unsigned char heartbeat_bit_pos[] = { 2, 1, 0, 3, 6, 5, 4, 7 }; + +static struct resource heartbeat_resources[] = { + [0] = { + .start = PA_OBLED, + .end = PA_OBLED + ARRAY_SIZE(heartbeat_bit_pos) - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .dev = { + .platform_data = heartbeat_bit_pos, + }, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + static struct platform_device *r7780rp_devices[] __initdata = { &m66596_usb_host_device, &cf_ide_device, + &heartbeat_device, }; static int __init r7780rp_devices_setup(void) @@ -185,8 +205,5 @@ struct sh_machine_vector mv_r7780rp __initmv = { .mv_ioport_map = r7780rp_ioport_map, .mv_init_irq = init_r7780rp_IRQ, -#ifdef CONFIG_HEARTBEAT - .mv_heartbeat = heartbeat_r7780rp, -#endif }; ALIAS_MV(r7780rp) diff --git a/arch/sh/boards/renesas/rts7751r2d/Makefile b/arch/sh/boards/renesas/rts7751r2d/Makefile index 686fc9ea5989..833de1eac0e8 100644 --- a/arch/sh/boards/renesas/rts7751r2d/Makefile +++ b/arch/sh/boards/renesas/rts7751r2d/Makefile @@ -3,4 +3,3 @@ # obj-y := setup.o io.o irq.o -obj-$(CONFIG_HEARTBEAT) += led.o diff --git a/arch/sh/boards/renesas/rts7751r2d/led.c b/arch/sh/boards/renesas/rts7751r2d/led.c deleted file mode 100644 index 509f548bdce0..000000000000 --- a/arch/sh/boards/renesas/rts7751r2d/led.c +++ /dev/null @@ -1,44 +0,0 @@ -/* - * linux/arch/sh/boards/renesas/rts7751r2d/led.c - * - * Copyright (C) Atom Create Engineering Co., Ltd. - * - * May be copied or modified under the terms of GNU General Public - * License. See linux/COPYING for more information. - * - * This file contains Renesas Technology Sales RTS7751R2D specific LED code. - */ -#include -#include -#include - -/* Cycle the LED's in the clasic Knightriger/Sun pattern */ -void heartbeat_rts7751r2d(void) -{ - static unsigned int cnt = 0, period = 0; - volatile unsigned short *p = (volatile unsigned short *)PA_OUTPORT; - static unsigned bit = 0, up = 1; - - cnt += 1; - if (cnt < period) - return; - - cnt = 0; - - /* Go through the points (roughly!): - * f(0)=10, f(1)=16, f(2)=20, f(5)=35, f(int)->110 - */ - period = 110 - ((300 << FSHIFT)/((avenrun[0]/5) + (3< - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * This file contains Solution Engine specific LED code. - */ - -#include -#include - -#ifdef CONFIG_HEARTBEAT - -#include - -/* Cycle the LED's in the clasic Knightrider/Sun pattern */ -void heartbeat_se(void) -{ - static unsigned int cnt = 0, period = 0; - volatile unsigned short* p = (volatile unsigned short*)PA_LED; - static unsigned bit = 0, up = 1; - - cnt += 1; - if (cnt < period) { - return; - } - - cnt = 0; - - /* Go through the points (roughly!): - * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110 - */ - period = 110 - ( (300< - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * This file contains Solution Engine specific LED code. - */ - -#include -#include - -/* Cycle the LED's in the clasic Knightrider/Sun pattern */ -void heartbeat_7300se(void) -{ - static unsigned int cnt = 0, period = 0; - volatile unsigned short *p = (volatile unsigned short *) PA_LED; - static unsigned bit = 0, up = 1; - - cnt += 1; - if (cnt < period) { - return; - } - - cnt = 0; - - /* Go through the points (roughly!): - * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110 - */ - period = 110 - ((300 << FSHIFT) / ((avenrun[0] / 5) + (3 << FSHIFT))); - - if (up) { - if (bit == 7) { - bit--; - up = 0; - } else { - bit++; - } - } else { - if (bit == 0) { - bit++; - up = 1; - } else { - bit--; - } - } - *p = 1 << (bit + 8); - -} - diff --git a/arch/sh/boards/se/7300/setup.c b/arch/sh/boards/se/7300/setup.c index 6f082a722d42..f1960956bad0 100644 --- a/arch/sh/boards/se/7300/setup.c +++ b/arch/sh/boards/se/7300/setup.c @@ -6,14 +6,43 @@ * SH-Mobile SolutionEngine 7300 Support. * */ - #include +#include #include #include -void heartbeat_7300se(void); void init_7300se_IRQ(void); +static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 }; + +static struct resource heartbeat_resources[] = { + [0] = { + .start = PA_LED, + .end = PA_LED + ARRAY_SIZE(heartbeat_bit_pos) - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .dev = { + .platform_data = heartbeat_bit_pos, + }, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + +static struct platform_device *se7300_devices[] __initdata = { + &heartbeat_device, +}; + +static int __init se7300_devices_setup(void) +{ + return platform_add_devices(se7300_devices, ARRAY_SIZE(se7300_devices)); +} +__initcall(se7300_devices_setup); + /* * The Machine Vector */ @@ -42,8 +71,5 @@ struct sh_machine_vector mv_7300se __initmv = { .mv_outsl = sh7300se_outsl, .mv_init_irq = init_7300se_IRQ, -#ifdef CONFIG_HEARTBEAT - .mv_heartbeat = heartbeat_7300se, -#endif }; ALIAS_MV(7300se) diff --git a/arch/sh/boards/se/73180/Makefile b/arch/sh/boards/se/73180/Makefile index 8f63886a0f3f..e7c09967c529 100644 --- a/arch/sh/boards/se/73180/Makefile +++ b/arch/sh/boards/se/73180/Makefile @@ -3,5 +3,3 @@ # obj-y := setup.o io.o irq.o - -obj-$(CONFIG_HEARTBEAT) += led.o diff --git a/arch/sh/boards/se/73180/led.c b/arch/sh/boards/se/73180/led.c deleted file mode 100644 index 4b72e9a3ead9..000000000000 --- a/arch/sh/boards/se/73180/led.c +++ /dev/null @@ -1,53 +0,0 @@ -/* - * arch/sh/boards/se/73180/led.c - * - * Derived from arch/sh/boards/se/770x/led.c - * - * Copyright (C) 2000 Stuart Menefy - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * This file contains Solution Engine specific LED code. - */ - -#include -#include - -/* Cycle the LED's in the clasic Knightrider/Sun pattern */ -void heartbeat_73180se(void) -{ - static unsigned int cnt = 0, period = 0; - volatile unsigned short *p = (volatile unsigned short *) PA_LED; - static unsigned bit = 0, up = 1; - - cnt += 1; - if (cnt < period) { - return; - } - - cnt = 0; - - /* Go through the points (roughly!): - * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110 - */ - period = 110 - ((300 << FSHIFT) / ((avenrun[0] / 5) + (3 << FSHIFT))); - - if (up) { - if (bit == 7) { - bit--; - up = 0; - } else { - bit++; - } - } else { - if (bit == 0) { - bit++; - up = 1; - } else { - bit--; - } - } - *p = 1 << (bit + LED_SHIFT); - -} diff --git a/arch/sh/boards/se/73180/setup.c b/arch/sh/boards/se/73180/setup.c index b38ef50a160a..911ce1cdbd7f 100644 --- a/arch/sh/boards/se/73180/setup.c +++ b/arch/sh/boards/se/73180/setup.c @@ -10,13 +10,39 @@ */ #include +#include #include #include #include -void heartbeat_73180se(void); void init_73180se_IRQ(void); +static struct resource heartbeat_resources[] = { + [0] = { + .start = PA_LED, + .end = PA_LED + 8 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + +static struct platform_device *se73180_devices[] __initdata = { + &heartbeat_device, +}; + +static int __init se73180_devices_setup(void) +{ + return platform_add_devices(sh7343se_platform_devices, + ARRAY_SIZE(sh7343se_platform_devices)); +} +__initcall(se73180_devices_setup); + /* * The Machine Vector */ @@ -46,8 +72,5 @@ struct sh_machine_vector mv_73180se __initmv = { .mv_init_irq = init_73180se_IRQ, .mv_irq_demux = shmse_irq_demux, -#ifdef CONFIG_HEARTBEAT - .mv_heartbeat = heartbeat_73180se, -#endif }; ALIAS_MV(73180se) diff --git a/arch/sh/boards/se/7343/Makefile b/arch/sh/boards/se/7343/Makefile index 4291069c0b4f..3024796c6203 100644 --- a/arch/sh/boards/se/7343/Makefile +++ b/arch/sh/boards/se/7343/Makefile @@ -3,5 +3,3 @@ # obj-y := setup.o io.o irq.o - -obj-$(CONFIG_HEARTBEAT) += led.o diff --git a/arch/sh/boards/se/7343/led.c b/arch/sh/boards/se/7343/led.c deleted file mode 100644 index 6b39e191c420..000000000000 --- a/arch/sh/boards/se/7343/led.c +++ /dev/null @@ -1,44 +0,0 @@ -/* - * arch/sh/boards/se/7343/led.c - * - */ -#include -#include - -/* Cycle the LED's in the clasic Knightrider/Sun pattern */ -void heartbeat_7343se(void) -{ - static unsigned int cnt = 0, period = 0; - volatile unsigned short *p = (volatile unsigned short *) PA_LED; - static unsigned bit = 0, up = 1; - - cnt += 1; - if (cnt < period) { - return; - } - - cnt = 0; - - /* Go through the points (roughly!): - * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110 - */ - period = 110 - ((300 << FSHIFT) / ((avenrun[0] / 5) + (3 << FSHIFT))); - - if (up) { - if (bit == 7) { - bit--; - up = 0; - } else { - bit++; - } - } else { - if (bit == 0) { - bit++; - up = 1; - } else { - bit--; - } - } - *p = 1 << (bit + LED_SHIFT); - -} diff --git a/arch/sh/boards/se/7343/setup.c b/arch/sh/boards/se/7343/setup.c index c7d17fe7764e..3fdb16f2cef1 100644 --- a/arch/sh/boards/se/7343/setup.c +++ b/arch/sh/boards/se/7343/setup.c @@ -4,7 +4,6 @@ #include #include -void heartbeat_7343se(void); void init_7343se_IRQ(void); static struct resource smc91x_resources[] = { @@ -31,14 +30,30 @@ static struct platform_device smc91x_device = { .resource = smc91x_resources, }; -static struct platform_device *smc91x_platform_devices[] __initdata = { +static struct resource heartbeat_resources[] = { + [0] = { + .start = PA_LED, + .end = PA_LED + 8 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + +static struct platform_device *sh7343se_platform_devices[] __initdata = { &smc91x_device, + &heartbeat_device, }; static int __init sh7343se_devices_setup(void) { - return platform_add_devices(smc91x_platform_devices, - ARRAY_SIZE(smc91x_platform_devices)); + return platform_add_devices(sh7343se_platform_devices, + ARRAY_SIZE(sh7343se_platform_devices)); } static void __init sh7343se_setup(char **cmdline_p) @@ -76,8 +91,5 @@ struct sh_machine_vector mv_7343se __initmv = { .mv_init_irq = init_7343se_IRQ, .mv_irq_demux = shmse_irq_demux, -#ifdef CONFIG_HEARTBEAT - .mv_heartbeat = heartbeat_7343se, -#endif }; ALIAS_MV(7343se) diff --git a/arch/sh/boards/se/770x/Makefile b/arch/sh/boards/se/770x/Makefile index 9a5035f80ec0..8e624b06d5ea 100644 --- a/arch/sh/boards/se/770x/Makefile +++ b/arch/sh/boards/se/770x/Makefile @@ -3,4 +3,3 @@ # obj-y := setup.o io.o irq.o -obj-$(CONFIG_HEARTBEAT) += led.o diff --git a/arch/sh/boards/se/770x/led.c b/arch/sh/boards/se/770x/led.c deleted file mode 100644 index d93dd831b2ad..000000000000 --- a/arch/sh/boards/se/770x/led.c +++ /dev/null @@ -1,52 +0,0 @@ -/* - * linux/arch/sh/boards/se/770x/led.c - * - * Copyright (C) 2000 Stuart Menefy - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * This file contains Solution Engine specific LED code. - */ - -#include -#include - -/* Cycle the LED's in the clasic Knightrider/Sun pattern */ -void heartbeat_se(void) -{ - static unsigned int cnt = 0, period = 0; - volatile unsigned short* p = (volatile unsigned short*)PA_LED; - static unsigned bit = 0, up = 1; - - cnt += 1; - if (cnt < period) { - return; - } - - cnt = 0; - - /* Go through the points (roughly!): - * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110 - */ - period = 110 - ( (300< +#include #include #include #include #include -void heartbeat_se(void); void init_se_IRQ(void); /* @@ -63,6 +63,36 @@ static void __init smsc_setup(char **cmdline_p) outb_p(CONFIG_EXIT, CONFIG_PORT); } +static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 }; + +static struct resource heartbeat_resources[] = { + [0] = { + .start = PA_LED, + .end = PA_LED + ARRAY_SIZE(heartbeat_bit_pos) - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .dev = { + .platform_data = heartbeat_bit_pos, + }, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + +static struct platform_device *se_devices[] __initdata = { + &heartbeat_device, +}; + +static int __init se_devices_setup(void) +{ + return platform_add_devices(se_devices, ARRAY_SIZE(se_devices)); +} +__initcall(se_devices_setup); + /* * The Machine Vector */ @@ -101,8 +131,5 @@ struct sh_machine_vector mv_se __initmv = { .mv_outsl = se_outsl, .mv_init_irq = init_se_IRQ, -#ifdef CONFIG_HEARTBEAT - .mv_heartbeat = heartbeat_se, -#endif }; ALIAS_MV(se) diff --git a/arch/sh/boards/se/7751/Makefile b/arch/sh/boards/se/7751/Makefile index 188900c48321..dbc29f3a9de5 100644 --- a/arch/sh/boards/se/7751/Makefile +++ b/arch/sh/boards/se/7751/Makefile @@ -5,4 +5,3 @@ obj-y := setup.o io.o irq.o obj-$(CONFIG_PCI) += pci.o -obj-$(CONFIG_HEARTBEAT) += led.o diff --git a/arch/sh/boards/se/7751/led.c b/arch/sh/boards/se/7751/led.c deleted file mode 100644 index de4194d97c88..000000000000 --- a/arch/sh/boards/se/7751/led.c +++ /dev/null @@ -1,51 +0,0 @@ -/* - * linux/arch/sh/boards/se/7751/led.c - * - * Copyright (C) 2000 Stuart Menefy - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * This file contains Solution Engine specific LED code. - */ -#include -#include - -/* Cycle the LED's in the clasic Knightrider/Sun pattern */ -void heartbeat_7751se(void) -{ - static unsigned int cnt = 0, period = 0; - volatile unsigned short* p = (volatile unsigned short*)PA_LED; - static unsigned bit = 0, up = 1; - - cnt += 1; - if (cnt < period) { - return; - } - - cnt = 0; - - /* Go through the points (roughly!): - * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110 - */ - period = 110 - ( (300< +#include #include #include #include -void heartbeat_7751se(void); void init_7751se_IRQ(void); #ifdef CONFIG_SH_KGDB @@ -161,11 +161,40 @@ static int kgdb_uart_setup(void) } #endif /* CONFIG_SH_KGDB */ +static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 }; + +static struct resource heartbeat_resources[] = { + [0] = { + .start = PA_LED, + .end = PA_LED + ARRAY_SIZE(heartbeat_bit_pos) - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .dev = { + .platform_data = heartbeat_bit_pos, + }, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + +static struct platform_device *se7751_devices[] __initdata = { + &smc91x_device, + &heartbeat_device, +}; + +static int __init se7751_devices_setup(void) +{ + return platform_add_devices(se7751_devices, ARRAY_SIZE(se7751_devices)); +} +__initcall(se7751_devices_setup); /* * The Machine Vector */ - struct sh_machine_vector mv_7751se __initmv = { .mv_name = "7751 SolutionEngine", .mv_setup = sh7751se_setup, @@ -189,8 +218,5 @@ struct sh_machine_vector mv_7751se __initmv = { .mv_outsl = sh7751se_outsl, .mv_init_irq = init_7751se_IRQ, -#ifdef CONFIG_HEARTBEAT - .mv_heartbeat = heartbeat_7751se, -#endif }; ALIAS_MV(7751se) diff --git a/arch/sh/boards/sh03/Makefile b/arch/sh/boards/sh03/Makefile index 321be50e36a5..400306a796ec 100644 --- a/arch/sh/boards/sh03/Makefile +++ b/arch/sh/boards/sh03/Makefile @@ -3,4 +3,3 @@ # obj-y := setup.o rtc.o -obj-$(CONFIG_HEARTBEAT) += led.o diff --git a/arch/sh/boards/sh03/led.c b/arch/sh/boards/sh03/led.c deleted file mode 100644 index d38562ad6be8..000000000000 --- a/arch/sh/boards/sh03/led.c +++ /dev/null @@ -1,48 +0,0 @@ -/* - * linux/arch/sh/boards/sh03/led.c - * - * Copyright (C) 2004 Saito.K Interface Corporation. - * - * This file contains Interface CTP/PCI-SH03 specific LED code. - */ - -#include - -/* Cycle the LED's in the clasic Knightrider/Sun pattern */ -void heartbeat_sh03(void) -{ - static unsigned int cnt = 0, period = 0; - volatile unsigned char* p = (volatile unsigned char*)0xa0800000; - static unsigned bit = 0, up = 1; - - cnt += 1; - if (cnt < period) { - return; - } - - cnt = 0; - - /* Go through the points (roughly!): - * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110 - */ - period = 110 - ( (300< #include #include +#include #include #include #include @@ -48,15 +49,36 @@ static void __init sh03_setup(char **cmdline_p) board_time_init = sh03_time_init; } +static struct resource heartbeat_resources[] = { + [0] = { + .start = 0xa0800000, + .end = 0xa0800000 + 8 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + +static struct platform_device *sh03_devices[] __initdata = { + &heartbeat_device, +}; + +static int __init sh03_devices_setup(void) +{ + return platform_add_devices(sh03_devices, ARRAY_SIZE(sh03_devices)); +} +__initcall(sh03_devices_setup); + struct sh_machine_vector mv_sh03 __initmv = { .mv_name = "Interface (CTP/PCI-SH03)", .mv_setup = sh03_setup, .mv_nr_irqs = 48, .mv_ioport_map = sh03_ioport_map, .mv_init_irq = init_sh03_IRQ, - -#ifdef CONFIG_HEARTBEAT - .mv_heartbeat = heartbeat_sh03, -#endif }; ALIAS_MV(sh03) diff --git a/arch/sh/drivers/Makefile b/arch/sh/drivers/Makefile index bf18dbfb6787..6cb92676c5fc 100644 --- a/arch/sh/drivers/Makefile +++ b/arch/sh/drivers/Makefile @@ -6,3 +6,4 @@ obj-$(CONFIG_PCI) += pci/ obj-$(CONFIG_SH_DMA) += dma/ obj-$(CONFIG_SUPERHYWAY) += superhyway/ obj-$(CONFIG_PUSH_SWITCH) += push-switch.o +obj-$(CONFIG_HEARTBEAT) += heartbeat.o -- cgit v1.2.3 From 401e9093a326725780aed270a6eb53e7ddab14ff Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 13 Feb 2007 15:46:39 +0900 Subject: sh: Compile fix for heartbeat consolidation. Signed-off-by: Paul Mundt --- arch/sh/drivers/heartbeat.c | 132 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 132 insertions(+) create mode 100644 arch/sh/drivers/heartbeat.c (limited to 'arch') diff --git a/arch/sh/drivers/heartbeat.c b/arch/sh/drivers/heartbeat.c new file mode 100644 index 000000000000..bc59cb6cd78b --- /dev/null +++ b/arch/sh/drivers/heartbeat.c @@ -0,0 +1,132 @@ +/* + * Generic heartbeat driver for regular LED banks + * + * Copyright (C) 2007 Paul Mundt + * + * Most SH reference boards include a number of individual LEDs that can + * be independently controlled (either via a pre-defined hardware + * function or via the LED class, if desired -- the hardware tends to + * encapsulate some of the same "triggers" that the LED class supports, + * so there's not too much value in it). + * + * Additionally, most of these boards also have a LED bank that we've + * traditionally used for strobing the load average. This use case is + * handled by this driver, rather than giving each LED bit position its + * own struct device. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "heartbeat" +#define DRV_VERSION "0.1.0" + +struct heartbeat_data { + void __iomem *base; + unsigned char bit_pos[8]; + struct timer_list timer; +}; + +static void heartbeat_timer(unsigned long data) +{ + struct heartbeat_data *hd = (struct heartbeat_data *)data; + static unsigned bit = 0, up = 1; + + ctrl_outw(1 << hd->bit_pos[bit], (unsigned long)hd->base); + if (up) + if (bit == (ARRAY_SIZE(hd->bit_pos) - 1)) { + bit--; + up = 0; + } else + bit++; + else if (bit == 0) + up = 1; + else + bit--; + + mod_timer(&hd->timer, jiffies + (110 - ((300 << FSHIFT) / + ((avenrun[0] / 5) + (3 << FSHIFT))))); +} + +static int heartbeat_drv_probe(struct platform_device *pdev) +{ + struct resource *res; + struct heartbeat_data *hd; + + if (unlikely(pdev->num_resources != 1)) { + dev_err(&pdev->dev, "invalid number of resources\n"); + return -EINVAL; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (unlikely(res == NULL)) { + dev_err(&pdev->dev, "invalid resource\n"); + return -EINVAL; + } + + hd = kmalloc(sizeof(struct heartbeat_data), GFP_KERNEL); + if (unlikely(!hd)) + return -ENOMEM; + + if (pdev->dev.platform_data) { + memcpy(hd->bit_pos, pdev->dev.platform_data, + ARRAY_SIZE(hd->bit_pos)); + } else { + int i; + + for (i = 0; i < ARRAY_SIZE(hd->bit_pos); i++) + hd->bit_pos[i] = i; + } + + hd->base = (void __iomem *)res->start; + + setup_timer(&hd->timer, heartbeat_timer, (unsigned long)hd); + platform_set_drvdata(pdev, hd); + + return mod_timer(&hd->timer, jiffies + 1); +} + +static int heartbeat_drv_remove(struct platform_device *pdev) +{ + struct heartbeat_data *hd = platform_get_drvdata(pdev); + + del_timer_sync(&hd->timer); + + platform_set_drvdata(pdev, NULL); + + kfree(hd); + + return 0; +} + +static struct platform_driver heartbeat_driver = { + .probe = heartbeat_drv_probe, + .remove = heartbeat_drv_remove, + .driver = { + .name = DRV_NAME, + }, +}; + +static int __init heartbeat_init(void) +{ + printk(KERN_NOTICE DRV_NAME ": version %s loaded\n", DRV_VERSION); + return platform_driver_register(&heartbeat_driver); +} + +static void __exit heartbeat_exit(void) +{ + platform_driver_unregister(&heartbeat_driver); +} +module_init(heartbeat_init); +module_exit(heartbeat_exit); + +MODULE_VERSION(DRV_VERSION); +MODULE_AUTHOR("Paul Mundt"); +MODULE_LICENSE("GPLv2"); -- cgit v1.2.3 From 7f8f97c3cc75d5783d0b45cf323dedf17684be19 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Sat, 10 Feb 2007 21:28:03 -0500 Subject: ACPI: acpi_table_parse() now returns success/fail, not count Returning count for tables that are supposed to be unique was useless and confusing. Signed-off-by: Len Brown --- arch/i386/kernel/acpi/boot.c | 5 ++--- arch/x86_64/kernel/early-quirks.c | 4 +++- arch/x86_64/pci/mmconfig.c | 4 +++- 3 files changed, 8 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c index e94aff6888ca..7ac7b67b8519 100644 --- a/arch/i386/kernel/acpi/boot.c +++ b/arch/i386/kernel/acpi/boot.c @@ -865,10 +865,9 @@ static inline int acpi_parse_madt_ioapic_entries(void) static void __init acpi_process_madt(void) { #ifdef CONFIG_X86_LOCAL_APIC - int count, error; + int error; - count = acpi_table_parse(ACPI_SIG_MADT, acpi_parse_madt); - if (count >= 1) { + if (!acpi_table_parse(ACPI_SIG_MADT, acpi_parse_madt)) { /* * Parse MADT LAPIC entries diff --git a/arch/x86_64/kernel/early-quirks.c b/arch/x86_64/kernel/early-quirks.c index bd30d138113f..8047ea8c2ab2 100644 --- a/arch/x86_64/kernel/early-quirks.c +++ b/arch/x86_64/kernel/early-quirks.c @@ -53,7 +53,9 @@ static void nvidia_bugs(void) return; nvidia_hpet_detected = 0; - acpi_table_parse(ACPI_SIG_HPET, nvidia_hpet_check); + if (acpi_table_parse(ACPI_SIG_HPET, nvidia_hpet_check)) + return; + if (nvidia_hpet_detected == 0) { acpi_skip_timer_override = 1; printk(KERN_INFO "Nvidia board " diff --git a/arch/x86_64/pci/mmconfig.c b/arch/x86_64/pci/mmconfig.c index faabb6e87f12..98202cb50d8a 100644 --- a/arch/x86_64/pci/mmconfig.c +++ b/arch/x86_64/pci/mmconfig.c @@ -170,7 +170,9 @@ void __init pci_mmcfg_init(int type) if ((pci_probe & PCI_PROBE_MMCONF) == 0) return; - acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg); + if (acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg)) + return; + if ((pci_mmcfg_config_num == 0) || (pci_mmcfg_config == NULL) || (pci_mmcfg_config[0].address == 0)) -- cgit v1.2.3 From 287eeb5e02bfd9ddcb881f47400510b5cda686d1 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Tue, 13 Feb 2007 13:26:19 +0100 Subject: [PATCH] x86-64: Update defconfig Signed-off-by: Andi Kleen --- arch/x86_64/defconfig | 45 ++++++++++++++++++++++++++++++++++----------- 1 file changed, 34 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/defconfig b/arch/x86_64/defconfig index 69584c295305..293a4a4c609e 100644 --- a/arch/x86_64/defconfig +++ b/arch/x86_64/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20-rc3 -# Fri Jan 5 11:54:41 2007 +# Linux kernel version: 2.6.20-git8 +# Tue Feb 13 11:25:16 2007 # CONFIG_X86_64=y CONFIG_64BIT=y @@ -11,6 +11,7 @@ CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_MMU=y +CONFIG_ZONE_DMA=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y @@ -153,6 +154,7 @@ CONFIG_NEED_MULTIPLE_NODES=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y +CONFIG_ZONE_DMA_FLAG=1 CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y CONFIG_OUT_OF_LINE_PFN_TO_PAGE=y CONFIG_NR_CPUS=32 @@ -201,13 +203,14 @@ CONFIG_ACPI=y CONFIG_ACPI_SLEEP=y CONFIG_ACPI_SLEEP_PROC_FS=y CONFIG_ACPI_SLEEP_PROC_SLEEP=y +CONFIG_ACPI_PROCFS=y CONFIG_ACPI_AC=y CONFIG_ACPI_BATTERY=y CONFIG_ACPI_BUTTON=y -# CONFIG_ACPI_VIDEO is not set # CONFIG_ACPI_HOTKEY is not set CONFIG_ACPI_FAN=y # CONFIG_ACPI_DOCK is not set +# CONFIG_ACPI_BAY is not set CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_HOTPLUG_CPU=y CONFIG_ACPI_THERMAL=y @@ -263,7 +266,6 @@ CONFIG_PCI_MMCONFIG=y CONFIG_PCIEPORTBUS=y CONFIG_PCIEAER=y CONFIG_PCI_MSI=y -# CONFIG_PCI_MULTITHREAD_PROBE is not set # CONFIG_PCI_DEBUG is not set # CONFIG_HT_IRQ is not set @@ -398,6 +400,7 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # @@ -466,6 +469,7 @@ CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set +CONFIG_BLK_DEV_IDEACPI=y # CONFIG_IDE_TASK_IOCTL is not set # @@ -497,6 +501,7 @@ CONFIG_BLK_DEV_ATIIXP=y # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set CONFIG_BLK_DEV_PIIX=y +# CONFIG_BLK_DEV_IT8213 is not set # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set @@ -507,6 +512,7 @@ CONFIG_BLK_DEV_PDC202XX_NEW=y # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_BLK_DEV_TC86C001 is not set # CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set @@ -599,6 +605,7 @@ CONFIG_MEGARAID_SAS=y # Serial ATA (prod) and Parallel ATA (experimental) drivers # CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_AHCI=y CONFIG_SATA_SVW=y CONFIG_ATA_PIIX=y @@ -614,6 +621,7 @@ CONFIG_SATA_SIL=y # CONFIG_SATA_ULI is not set CONFIG_SATA_VIA=y # CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set CONFIG_SATA_INTEL_COMBINED=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set @@ -630,6 +638,7 @@ CONFIG_SATA_INTEL_COMBINED=y # CONFIG_PATA_HPT3X2N is not set # CONFIG_PATA_HPT3X3 is not set # CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set # CONFIG_PATA_JMICRON is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_MARVELL is not set @@ -682,9 +691,7 @@ CONFIG_IEEE1394=y # Subsystem Options # # CONFIG_IEEE1394_VERBOSEDEBUG is not set -# CONFIG_IEEE1394_OUI_DB is not set # CONFIG_IEEE1394_EXTRA_CONFIG_ROMS is not set -# CONFIG_IEEE1394_EXPORT_FULL_API is not set # # Device Drivers @@ -706,6 +713,11 @@ CONFIG_IEEE1394_RAWIO=y # # CONFIG_I2O is not set +# +# Macintosh device drivers +# +# CONFIG_MAC_EMUMOUSEBTN is not set + # # Network device support # @@ -774,6 +786,7 @@ CONFIG_8139TOO=y # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_VIA_RHINE is not set +# CONFIG_SC92031 is not set # # Ethernet (1000 Mbit) @@ -795,11 +808,13 @@ CONFIG_E1000=y CONFIG_TIGON3=y CONFIG_BNX2=y # CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set # # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set # CONFIG_IXGB is not set CONFIG_S2IO=m # CONFIG_S2IO_NAPI is not set @@ -1115,6 +1130,7 @@ CONFIG_SOUND=y # Open Sound System # CONFIG_SOUND_PRIME=y +CONFIG_OBSOLETE_OSS=y # CONFIG_SOUND_BT878 is not set # CONFIG_SOUND_ES1371 is not set CONFIG_SOUND_ICH=y @@ -1128,6 +1144,7 @@ CONFIG_SOUND_ICH=y # HID Devices # CONFIG_HID=y +# CONFIG_HID_DEBUG is not set # # USB support @@ -1142,10 +1159,8 @@ CONFIG_USB=y # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_SUSPEND is not set -# CONFIG_USB_MULTITHREAD_PROBE is not set # CONFIG_USB_OTG is not set # @@ -1155,9 +1170,11 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set @@ -1208,6 +1225,7 @@ CONFIG_USB_HID=y # CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set +# CONFIG_USB_GTCO is not set # # USB Imaging devices @@ -1312,6 +1330,10 @@ CONFIG_USB_MON=y # DMA Devices # +# +# Auxiliary Display support +# + # # Virtualization # @@ -1512,6 +1534,7 @@ CONFIG_UNUSED_SYMBOLS=y CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set CONFIG_LOG_BUF_SHIFT=18 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set @@ -1520,7 +1543,6 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_RWSEMS is not set # CONFIG_DEBUG_LOCK_ALLOC is not set # CONFIG_PROVE_LOCKING is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set @@ -1560,4 +1582,5 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_PLIST=y -CONFIG_IOMAP_COPY=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y -- cgit v1.2.3 From ee55c0be30429d7c3e61fa26c7f7e323c80e14f0 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Tue, 13 Feb 2007 13:26:19 +0100 Subject: [PATCH] i386: Update defconfig Signed-off-by: Andi Kleen --- arch/i386/defconfig | 51 +++++++++++++++++++++++++++++++++++++-------------- 1 file changed, 37 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/i386/defconfig b/arch/i386/defconfig index bb0c376b62b3..5ae1e0bc8fd7 100644 --- a/arch/i386/defconfig +++ b/arch/i386/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20-rc3 -# Fri Jan 5 11:54:46 2007 +# Linux kernel version: 2.6.20-git8 +# Tue Feb 13 11:25:18 2007 # CONFIG_X86_32=y CONFIG_GENERIC_TIME=y @@ -10,6 +10,7 @@ CONFIG_STACKTRACE_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_X86=y CONFIG_MMU=y +CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_BUG=y @@ -139,7 +140,6 @@ CONFIG_MPENTIUMIII=y # CONFIG_MVIAC3_2 is not set CONFIG_X86_GENERIC=y CONFIG_X86_CMPXCHG=y -CONFIG_X86_XADD=y CONFIG_X86_L1_CACHE_SHIFT=7 CONFIG_RWSEM_XCHGADD_ALGORITHM=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set @@ -198,6 +198,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y +CONFIG_ZONE_DMA_FLAG=1 # CONFIG_HIGHPTE is not set # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y @@ -211,6 +212,7 @@ CONFIG_HZ_250=y CONFIG_HZ=250 # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_PHYSICAL_START=0x100000 # CONFIG_RELOCATABLE is not set CONFIG_PHYSICAL_ALIGN=0x100000 # CONFIG_HOTPLUG_CPU is not set @@ -229,13 +231,14 @@ CONFIG_PM_SYSFS_DEPRECATED=y # ACPI (Advanced Configuration and Power Interface) Support # CONFIG_ACPI=y +CONFIG_ACPI_PROCFS=y CONFIG_ACPI_AC=y CONFIG_ACPI_BATTERY=y CONFIG_ACPI_BUTTON=y -# CONFIG_ACPI_VIDEO is not set # CONFIG_ACPI_HOTKEY is not set CONFIG_ACPI_FAN=y # CONFIG_ACPI_DOCK is not set +# CONFIG_ACPI_BAY is not set CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_THERMAL=y # CONFIG_ACPI_ASUS is not set @@ -306,7 +309,6 @@ CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y # CONFIG_PCIEPORTBUS is not set CONFIG_PCI_MSI=y -# CONFIG_PCI_MULTITHREAD_PROBE is not set # CONFIG_PCI_DEBUG is not set # CONFIG_HT_IRQ is not set CONFIG_ISA_DMA_API=y @@ -347,6 +349,7 @@ CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -446,6 +449,7 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # @@ -466,8 +470,7 @@ CONFIG_FW_LOADER=y # # Plug and Play support # -CONFIG_PNP=y -CONFIG_PNPACPI=y +# CONFIG_PNP is not set # # Block devices @@ -515,6 +518,7 @@ CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set +CONFIG_BLK_DEV_IDEACPI=y # CONFIG_IDE_TASK_IOCTL is not set # @@ -547,6 +551,7 @@ CONFIG_BLK_DEV_AMD74XX=y # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set CONFIG_BLK_DEV_PIIX=y +# CONFIG_BLK_DEV_IT8213 is not set # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set @@ -557,6 +562,7 @@ CONFIG_BLK_DEV_PIIX=y # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_BLK_DEV_TC86C001 is not set # CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set @@ -655,6 +661,7 @@ CONFIG_AIC79XX_DEBUG_MASK=0 # Serial ATA (prod) and Parallel ATA (experimental) drivers # CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_AHCI=y CONFIG_SATA_SVW=y CONFIG_ATA_PIIX=y @@ -670,6 +677,7 @@ CONFIG_SATA_SIL=y # CONFIG_SATA_ULI is not set CONFIG_SATA_VIA=y # CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set CONFIG_SATA_INTEL_COMBINED=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set @@ -687,6 +695,7 @@ CONFIG_SATA_INTEL_COMBINED=y # CONFIG_PATA_HPT3X2N is not set # CONFIG_PATA_HPT3X3 is not set # CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set # CONFIG_PATA_JMICRON is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_MARVELL is not set @@ -739,9 +748,7 @@ CONFIG_IEEE1394=y # Subsystem Options # # CONFIG_IEEE1394_VERBOSEDEBUG is not set -# CONFIG_IEEE1394_OUI_DB is not set # CONFIG_IEEE1394_EXTRA_CONFIG_ROMS is not set -# CONFIG_IEEE1394_EXPORT_FULL_API is not set # # Device Drivers @@ -766,6 +773,11 @@ CONFIG_IEEE1394_RAWIO=y # # CONFIG_I2O is not set +# +# Macintosh device drivers +# +# CONFIG_MAC_EMUMOUSEBTN is not set + # # Network device support # @@ -833,6 +845,7 @@ CONFIG_8139TOO=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set +# CONFIG_SC92031 is not set # # Ethernet (1000 Mbit) @@ -855,11 +868,13 @@ CONFIG_SKY2=y CONFIG_TIGON3=y CONFIG_BNX2=y # CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set # # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set @@ -1090,6 +1105,7 @@ CONFIG_SOUND=y # Open Sound System # CONFIG_SOUND_PRIME=y +CONFIG_OBSOLETE_OSS=y # CONFIG_SOUND_BT878 is not set # CONFIG_SOUND_ES1371 is not set CONFIG_SOUND_ICH=y @@ -1103,6 +1119,7 @@ CONFIG_SOUND_ICH=y # HID Devices # CONFIG_HID=y +# CONFIG_HID_DEBUG is not set # # USB support @@ -1117,10 +1134,8 @@ CONFIG_USB=y # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_SUSPEND is not set -# CONFIG_USB_MULTITHREAD_PROBE is not set # CONFIG_USB_OTG is not set # @@ -1130,9 +1145,11 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set @@ -1183,6 +1200,7 @@ CONFIG_USB_HID=y # CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set +# CONFIG_USB_GTCO is not set # # USB Imaging devices @@ -1287,6 +1305,10 @@ CONFIG_USB_MON=y # DMA Devices # +# +# Auxiliary Display support +# + # # Virtualization # @@ -1480,6 +1502,7 @@ CONFIG_UNUSED_SYMBOLS=y # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set CONFIG_LOG_BUF_SHIFT=18 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set @@ -1488,7 +1511,6 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_RWSEMS is not set # CONFIG_DEBUG_LOCK_ALLOC is not set # CONFIG_PROVE_LOCKING is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set @@ -1533,7 +1555,8 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_PLIST=y -CONFIG_IOMAP_COPY=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y -- cgit v1.2.3 From 0812a579c92fefa57506821fa08e90f47cb6dbdd Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Tue, 13 Feb 2007 13:26:19 +0100 Subject: [PATCH] x86-64: Add __copy_from_user_nocache This does user copies in fs write() into the page cache with write combining. This pushes the destination out of the CPU's cache, but allows higher bandwidth in some case. The theory is that the page cache data is usually not touched by the CPU again and it's better to not pollute the cache with it. Also it is a little faster. Signed-off-by: Andi Kleen --- arch/x86_64/kernel/x8664_ksyms.c | 1 + arch/x86_64/lib/Makefile | 2 +- arch/x86_64/lib/copy_user_nocache.S | 217 ++++++++++++++++++++++++++++++++++++ 3 files changed, 219 insertions(+), 1 deletion(-) create mode 100644 arch/x86_64/lib/copy_user_nocache.S (limited to 'arch') diff --git a/arch/x86_64/kernel/x8664_ksyms.c b/arch/x86_64/kernel/x8664_ksyms.c index 6d77e4797a47..23a7da312f30 100644 --- a/arch/x86_64/kernel/x8664_ksyms.c +++ b/arch/x86_64/kernel/x8664_ksyms.c @@ -26,6 +26,7 @@ EXPORT_SYMBOL(__put_user_4); EXPORT_SYMBOL(__put_user_8); EXPORT_SYMBOL(copy_user_generic); +EXPORT_SYMBOL(__copy_user_nocache); EXPORT_SYMBOL(copy_from_user); EXPORT_SYMBOL(copy_to_user); EXPORT_SYMBOL(__copy_from_user_inatomic); diff --git a/arch/x86_64/lib/Makefile b/arch/x86_64/lib/Makefile index b78d4170fce2..8d5f835af481 100644 --- a/arch/x86_64/lib/Makefile +++ b/arch/x86_64/lib/Makefile @@ -9,4 +9,4 @@ obj-y := io.o iomap_copy.o lib-y := csum-partial.o csum-copy.o csum-wrappers.o delay.o \ usercopy.o getuser.o putuser.o \ thunk.o clear_page.o copy_page.o bitstr.o bitops.o -lib-y += memcpy.o memmove.o memset.o copy_user.o rwlock.o +lib-y += memcpy.o memmove.o memset.o copy_user.o rwlock.o copy_user_nocache.o diff --git a/arch/x86_64/lib/copy_user_nocache.S b/arch/x86_64/lib/copy_user_nocache.S new file mode 100644 index 000000000000..4620efb12f13 --- /dev/null +++ b/arch/x86_64/lib/copy_user_nocache.S @@ -0,0 +1,217 @@ +/* Copyright 2002 Andi Kleen, SuSE Labs. + * Subject to the GNU Public License v2. + * + * Functions to copy from and to user space. + */ + +#include +#include + +#define FIX_ALIGNMENT 1 + +#include +#include +#include +#include + +/* + * copy_user_nocache - Uncached memory copy with exception handling + * This will force destination/source out of cache for more performance. + * + * Input: + * rdi destination + * rsi source + * rdx count + * rcx zero flag when 1 zero on exception + * + * Output: + * eax uncopied bytes or 0 if successful. + */ +ENTRY(__copy_user_nocache) + CFI_STARTPROC + pushq %rbx + CFI_ADJUST_CFA_OFFSET 8 + CFI_REL_OFFSET rbx, 0 + pushq %rcx /* save zero flag */ + CFI_ADJUST_CFA_OFFSET 8 + CFI_REL_OFFSET rcx, 0 + + xorl %eax,%eax /* zero for the exception handler */ + +#ifdef FIX_ALIGNMENT + /* check for bad alignment of destination */ + movl %edi,%ecx + andl $7,%ecx + jnz .Lbad_alignment +.Lafter_bad_alignment: +#endif + + movq %rdx,%rcx + + movl $64,%ebx + shrq $6,%rdx + decq %rdx + js .Lhandle_tail + + .p2align 4 +.Lloop: +.Ls1: movq (%rsi),%r11 +.Ls2: movq 1*8(%rsi),%r8 +.Ls3: movq 2*8(%rsi),%r9 +.Ls4: movq 3*8(%rsi),%r10 +.Ld1: movnti %r11,(%rdi) +.Ld2: movnti %r8,1*8(%rdi) +.Ld3: movnti %r9,2*8(%rdi) +.Ld4: movnti %r10,3*8(%rdi) + +.Ls5: movq 4*8(%rsi),%r11 +.Ls6: movq 5*8(%rsi),%r8 +.Ls7: movq 6*8(%rsi),%r9 +.Ls8: movq 7*8(%rsi),%r10 +.Ld5: movnti %r11,4*8(%rdi) +.Ld6: movnti %r8,5*8(%rdi) +.Ld7: movnti %r9,6*8(%rdi) +.Ld8: movnti %r10,7*8(%rdi) + + dec %rdx + + leaq 64(%rsi),%rsi + leaq 64(%rdi),%rdi + + jns .Lloop + + .p2align 4 +.Lhandle_tail: + movl %ecx,%edx + andl $63,%ecx + shrl $3,%ecx + jz .Lhandle_7 + movl $8,%ebx + .p2align 4 +.Lloop_8: +.Ls9: movq (%rsi),%r8 +.Ld9: movnti %r8,(%rdi) + decl %ecx + leaq 8(%rdi),%rdi + leaq 8(%rsi),%rsi + jnz .Lloop_8 + +.Lhandle_7: + movl %edx,%ecx + andl $7,%ecx + jz .Lende + .p2align 4 +.Lloop_1: +.Ls10: movb (%rsi),%bl +.Ld10: movb %bl,(%rdi) + incq %rdi + incq %rsi + decl %ecx + jnz .Lloop_1 + + CFI_REMEMBER_STATE +.Lende: + popq %rcx + CFI_ADJUST_CFA_OFFSET -8 + CFI_RESTORE %rcx + popq %rbx + CFI_ADJUST_CFA_OFFSET -8 + CFI_RESTORE rbx + ret + CFI_RESTORE_STATE + +#ifdef FIX_ALIGNMENT + /* align destination */ + .p2align 4 +.Lbad_alignment: + movl $8,%r9d + subl %ecx,%r9d + movl %r9d,%ecx + cmpq %r9,%rdx + jz .Lhandle_7 + js .Lhandle_7 +.Lalign_1: +.Ls11: movb (%rsi),%bl +.Ld11: movb %bl,(%rdi) + incq %rsi + incq %rdi + decl %ecx + jnz .Lalign_1 + subq %r9,%rdx + jmp .Lafter_bad_alignment +#endif + + /* table sorted by exception address */ + .section __ex_table,"a" + .align 8 + .quad .Ls1,.Ls1e + .quad .Ls2,.Ls2e + .quad .Ls3,.Ls3e + .quad .Ls4,.Ls4e + .quad .Ld1,.Ls1e + .quad .Ld2,.Ls2e + .quad .Ld3,.Ls3e + .quad .Ld4,.Ls4e + .quad .Ls5,.Ls5e + .quad .Ls6,.Ls6e + .quad .Ls7,.Ls7e + .quad .Ls8,.Ls8e + .quad .Ld5,.Ls5e + .quad .Ld6,.Ls6e + .quad .Ld7,.Ls7e + .quad .Ld8,.Ls8e + .quad .Ls9,.Le_quad + .quad .Ld9,.Le_quad + .quad .Ls10,.Le_byte + .quad .Ld10,.Le_byte +#ifdef FIX_ALIGNMENT + .quad .Ls11,.Lzero_rest + .quad .Ld11,.Lzero_rest +#endif + .quad .Le5,.Le_zero + .previous + + /* compute 64-offset for main loop. 8 bytes accuracy with error on the + pessimistic side. this is gross. it would be better to fix the + interface. */ + /* eax: zero, ebx: 64 */ +.Ls1e: addl $8,%eax +.Ls2e: addl $8,%eax +.Ls3e: addl $8,%eax +.Ls4e: addl $8,%eax +.Ls5e: addl $8,%eax +.Ls6e: addl $8,%eax +.Ls7e: addl $8,%eax +.Ls8e: addl $8,%eax + addq %rbx,%rdi /* +64 */ + subq %rax,%rdi /* correct destination with computed offset */ + + shlq $6,%rdx /* loop counter * 64 (stride length) */ + addq %rax,%rdx /* add offset to loopcnt */ + andl $63,%ecx /* remaining bytes */ + addq %rcx,%rdx /* add them */ + jmp .Lzero_rest + + /* exception on quad word loop in tail handling */ + /* ecx: loopcnt/8, %edx: length, rdi: correct */ +.Le_quad: + shll $3,%ecx + andl $7,%edx + addl %ecx,%edx + /* edx: bytes to zero, rdi: dest, eax:zero */ +.Lzero_rest: + cmpl $0,(%rsp) /* zero flag set? */ + jz .Le_zero + movq %rdx,%rcx +.Le_byte: + xorl %eax,%eax +.Le5: rep + stosb + /* when there is another exception while zeroing the rest just return */ +.Le_zero: + movq %rdx,%rax + jmp .Lende + CFI_ENDPROC +ENDPROC(__copy_user_nocache) + + -- cgit v1.2.3 From 076422d2af7e3d8e72c6e70843f6ea377714b082 Mon Sep 17 00:00:00 2001 From: Amul Shah Date: Tue, 13 Feb 2007 13:26:19 +0100 Subject: [PATCH] x86-64: Allocate the NUMA hash function nodemap dynamically Remove the statically allocated memory to NUMA node hash map in favor of a dynamically allocated memory to node hash map (it is cache aligned). This patch has the nice side effect in that it allows the hash map to grow for systems with large amounts of memory (256GB - 1TB), but suffer from having small PCI space tacked onto the boot node (which is somewhere between 192MB to 512MB on the ES7000). Signed-off-by: Amul Shah Signed-off-by: Andi Kleen Cc: Andi Kleen Cc: Rohit Seth Signed-off-by: Andrew Morton --- arch/x86_64/kernel/e820.c | 7 +++++ arch/x86_64/kernel/setup.c | 5 ++++ arch/x86_64/mm/numa.c | 74 ++++++++++++++++++++++++++++++++++++++++------ 3 files changed, 77 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/e820.c b/arch/x86_64/kernel/e820.c index 6fe191c58084..9d67955bbc31 100644 --- a/arch/x86_64/kernel/e820.c +++ b/arch/x86_64/kernel/e820.c @@ -83,6 +83,13 @@ static inline int bad_addr(unsigned long *addrp, unsigned long size) return 1; } +#ifdef CONFIG_NUMA + /* NUMA memory to node map */ + if (last >= nodemap_addr && addr < nodemap_addr + nodemap_size) { + *addrp = nodemap_addr + nodemap_size; + return 1; + } +#endif /* XXX ramdisk image here? */ return 0; } diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c index 60477244d1a3..f330f8285499 100644 --- a/arch/x86_64/kernel/setup.c +++ b/arch/x86_64/kernel/setup.c @@ -444,6 +444,11 @@ void __init setup_arch(char **cmdline_p) /* reserve ebda region */ if (ebda_addr) reserve_bootmem_generic(ebda_addr, ebda_size); +#ifdef CONFIG_NUMA + /* reserve nodemap region */ + if (nodemap_addr) + reserve_bootmem_generic(nodemap_addr, nodemap_size); +#endif #ifdef CONFIG_SMP /* diff --git a/arch/x86_64/mm/numa.c b/arch/x86_64/mm/numa.c index 2ee2e003606c..7d9c428f4094 100644 --- a/arch/x86_64/mm/numa.c +++ b/arch/x86_64/mm/numa.c @@ -36,6 +36,8 @@ unsigned char apicid_to_node[MAX_LOCAL_APIC] __cpuinitdata = { cpumask_t node_to_cpumask[MAX_NUMNODES] __read_mostly; int numa_off __initdata; +unsigned long __initdata nodemap_addr; +unsigned long __initdata nodemap_size; /* @@ -52,34 +54,87 @@ populate_memnodemap(const struct bootnode *nodes, int numnodes, int shift) int res = -1; unsigned long addr, end; - if (shift >= 64) - return -1; - memset(memnodemap, 0xff, sizeof(memnodemap)); + memset(memnodemap, 0xff, memnodemapsize); for (i = 0; i < numnodes; i++) { addr = nodes[i].start; end = nodes[i].end; if (addr >= end) continue; - if ((end >> shift) >= NODEMAPSIZE) + if ((end >> shift) >= memnodemapsize) return 0; do { if (memnodemap[addr >> shift] != 0xff) return -1; memnodemap[addr >> shift] = i; - addr += (1UL << shift); + addr += (1UL << shift); } while (addr < end); res = 1; } return res; } -int __init compute_hash_shift(struct bootnode *nodes, int numnodes) +static int __init allocate_cachealigned_memnodemap(void) +{ + unsigned long pad, pad_addr; + + memnodemap = memnode.embedded_map; + if (memnodemapsize <= 48) { + printk(KERN_DEBUG "NUMA: Allocated memnodemap from %lx - %lx\n", + nodemap_addr, nodemap_addr + nodemap_size); + return 0; + } + + pad = L1_CACHE_BYTES - 1; + pad_addr = 0x8000; + nodemap_size = pad + memnodemapsize; + nodemap_addr = find_e820_area(pad_addr, end_pfn<= 0) - shift++; + for (i = 0; i < numnodes; i++) { + start = nodes[i].start; + end = nodes[i].end; + if (start >= end) + continue; + bitfield |= start | end; + if (end > memtop) + memtop = end; + } + i = find_first_bit(&bitfield, sizeof(unsigned long)*8); + memnodemapsize = (memtop >> i)+1; + return i; +} + +int __init compute_hash_shift(struct bootnode *nodes, int numnodes) +{ + int shift; + shift = extract_lsb_from_nodes(nodes, numnodes); + if (allocate_cachealigned_memnodemap()) + return -1; printk(KERN_DEBUG "NUMA: Using %d for the hash shift.\n", shift); @@ -290,6 +345,7 @@ void __init numa_initmem_init(unsigned long start_pfn, unsigned long end_pfn) end_pfn << PAGE_SHIFT); /* setup dummy node covering all memory */ memnode_shift = 63; + memnodemap = memnode.embedded_map; memnodemap[0] = 0; nodes_clear(node_online_map); node_set_online(0); -- cgit v1.2.3 From 54413927f022292aeccadd268fbf1c0b42129945 Mon Sep 17 00:00:00 2001 From: Amul Shah Date: Tue, 13 Feb 2007 13:26:20 +0100 Subject: [PATCH] x86-64: x86_64-make-the-numa-hash-function-nodemap-allocation fix fix - Removed an extraneous debug message from allocate_cachealigned_map - Changed extract_lsb_from_nodes to return 63 for the case where there was only one memory node. The prevents the creation of the dynamic hashmap. - Changed extract_lsb_from_nodes to use only the starting memory address of a node. On an ES7000, our nodes overlap the starting and ending address, meaning, that we see nodes like 00000 - 10000 10000 - 20000 But other systems have nodes whose start and end addresses do not overlap. For example: 00000 - 0FFFF 10000 - 1FFFF In this case, using the ending address will result in an LSB much lower than what is possible. In this case an LSB of 1 when in reality it should be 16. Cc: Andi Kleen Cc: Rohit Seth Signed-off-by: Andrew Morton Signed-off-by: Andi Kleen --- arch/x86_64/mm/numa.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/mm/numa.c b/arch/x86_64/mm/numa.c index 7d9c428f4094..1ec16ea97519 100644 --- a/arch/x86_64/mm/numa.c +++ b/arch/x86_64/mm/numa.c @@ -78,11 +78,8 @@ static int __init allocate_cachealigned_memnodemap(void) unsigned long pad, pad_addr; memnodemap = memnode.embedded_map; - if (memnodemapsize <= 48) { - printk(KERN_DEBUG "NUMA: Allocated memnodemap from %lx - %lx\n", - nodemap_addr, nodemap_addr + nodemap_size); + if (memnodemapsize <= 48) return 0; - } pad = L1_CACHE_BYTES - 1; pad_addr = 0x8000; @@ -110,7 +107,7 @@ static int __init allocate_cachealigned_memnodemap(void) static int __init extract_lsb_from_nodes (const struct bootnode *nodes, int numnodes) { - int i; + int i, nodes_used = 0; unsigned long start, end; unsigned long bitfield = 0, memtop = 0; @@ -119,11 +116,15 @@ extract_lsb_from_nodes (const struct bootnode *nodes, int numnodes) end = nodes[i].end; if (start >= end) continue; - bitfield |= start | end; + bitfield |= start; + nodes_used++; if (end > memtop) memtop = end; } - i = find_first_bit(&bitfield, sizeof(unsigned long)*8); + if (nodes_used <= 1) + i = 63; + else + i = find_first_bit(&bitfield, sizeof(unsigned long)*8); memnodemapsize = (memtop >> i)+1; return i; } -- cgit v1.2.3 From 464d1a78fbf8cf6c7fd970e7b3e2db50a320ce28 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Tue, 13 Feb 2007 13:26:20 +0100 Subject: [PATCH] i386: Convert i386 PDA code to use %fs Convert the PDA code to use %fs rather than %gs as the segment for per-processor data. This is because some processors show a small but measurable performance gain for reloading a NULL segment selector (as %fs generally is in user-space) versus a non-NULL one (as %gs generally is). On modern processors the difference is very small, perhaps undetectable. Some old AMD "K6 3D+" processors are noticably slower when %fs is used rather than %gs; I have no idea why this might be, but I think they're sufficiently rare that it doesn't matter much. This patch also fixes the math emulator, which had not been adjusted to match the changed struct pt_regs. [frederik.deweerdt@gmail.com: fixit with gdb] [mingo@elte.hu: Fix KVM too] Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Andi Kleen Cc: Ian Campbell Acked-by: Ingo Molnar Acked-by: Zachary Amsden Cc: Eric Dumazet Signed-off-by: Frederik Deweerdt Signed-off-by: Andrew Morton --- arch/i386/kernel/asm-offsets.c | 2 +- arch/i386/kernel/cpu/common.c | 14 +++++++------- arch/i386/kernel/entry.S | 32 ++++++++++++++++---------------- arch/i386/kernel/head.S | 6 +++--- arch/i386/kernel/kprobes.c | 4 ++-- arch/i386/kernel/process.c | 24 +++++++++++------------- arch/i386/kernel/ptrace.c | 16 ++++++++-------- arch/i386/kernel/signal.c | 10 +++++----- arch/i386/kernel/traps.c | 7 ++++--- arch/i386/kernel/vm86.c | 33 +++++++++++++++++---------------- arch/i386/math-emu/get_address.c | 14 +++++--------- 11 files changed, 79 insertions(+), 83 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/asm-offsets.c b/arch/i386/kernel/asm-offsets.c index 1b2f3cd33270..c37535163bfc 100644 --- a/arch/i386/kernel/asm-offsets.c +++ b/arch/i386/kernel/asm-offsets.c @@ -72,7 +72,7 @@ void foo(void) OFFSET(PT_EAX, pt_regs, eax); OFFSET(PT_DS, pt_regs, xds); OFFSET(PT_ES, pt_regs, xes); - OFFSET(PT_GS, pt_regs, xgs); + OFFSET(PT_FS, pt_regs, xfs); OFFSET(PT_ORIG_EAX, pt_regs, orig_eax); OFFSET(PT_EIP, pt_regs, eip); OFFSET(PT_CS, pt_regs, xcs); diff --git a/arch/i386/kernel/cpu/common.c b/arch/i386/kernel/cpu/common.c index 8a8bbdaaf38a..dcbbd0a8bfc2 100644 --- a/arch/i386/kernel/cpu/common.c +++ b/arch/i386/kernel/cpu/common.c @@ -605,7 +605,7 @@ void __init early_cpu_init(void) struct pt_regs * __devinit idle_regs(struct pt_regs *regs) { memset(regs, 0, sizeof(struct pt_regs)); - regs->xgs = __KERNEL_PDA; + regs->xfs = __KERNEL_PDA; return regs; } @@ -662,12 +662,12 @@ struct i386_pda boot_pda = { .pcurrent = &init_task, }; -static inline void set_kernel_gs(void) +static inline void set_kernel_fs(void) { - /* Set %gs for this CPU's PDA. Memory clobber is to create a + /* Set %fs for this CPU's PDA. Memory clobber is to create a barrier with respect to any PDA operations, so the compiler doesn't move any before here. */ - asm volatile ("mov %0, %%gs" : : "r" (__KERNEL_PDA) : "memory"); + asm volatile ("mov %0, %%fs" : : "r" (__KERNEL_PDA) : "memory"); } /* Initialize the CPU's GDT and PDA. The boot CPU does this for @@ -718,7 +718,7 @@ void __cpuinit cpu_set_gdt(int cpu) the boot CPU, this will transition from the boot gdt+pda to the real ones). */ load_gdt(cpu_gdt_descr); - set_kernel_gs(); + set_kernel_fs(); } /* Common CPU init for both boot and secondary CPUs */ @@ -764,8 +764,8 @@ static void __cpuinit _cpu_init(int cpu, struct task_struct *curr) __set_tss_desc(cpu, GDT_ENTRY_DOUBLEFAULT_TSS, &doublefault_tss); #endif - /* Clear %fs. */ - asm volatile ("mov %0, %%fs" : : "r" (0)); + /* Clear %gs. */ + asm volatile ("mov %0, %%gs" : : "r" (0)); /* Clear all 6 debug registers: */ set_debugreg(0, 0); diff --git a/arch/i386/kernel/entry.S b/arch/i386/kernel/entry.S index 5e47683fc63a..8c6a22a42d2e 100644 --- a/arch/i386/kernel/entry.S +++ b/arch/i386/kernel/entry.S @@ -30,7 +30,7 @@ * 18(%esp) - %eax * 1C(%esp) - %ds * 20(%esp) - %es - * 24(%esp) - %gs + * 24(%esp) - %fs * 28(%esp) - orig_eax * 2C(%esp) - %eip * 30(%esp) - %cs @@ -99,9 +99,9 @@ VM_MASK = 0x00020000 #define SAVE_ALL \ cld; \ - pushl %gs; \ + pushl %fs; \ CFI_ADJUST_CFA_OFFSET 4;\ - /*CFI_REL_OFFSET gs, 0;*/\ + /*CFI_REL_OFFSET fs, 0;*/\ pushl %es; \ CFI_ADJUST_CFA_OFFSET 4;\ /*CFI_REL_OFFSET es, 0;*/\ @@ -133,7 +133,7 @@ VM_MASK = 0x00020000 movl %edx, %ds; \ movl %edx, %es; \ movl $(__KERNEL_PDA), %edx; \ - movl %edx, %gs + movl %edx, %fs #define RESTORE_INT_REGS \ popl %ebx; \ @@ -166,9 +166,9 @@ VM_MASK = 0x00020000 2: popl %es; \ CFI_ADJUST_CFA_OFFSET -4;\ /*CFI_RESTORE es;*/\ -3: popl %gs; \ +3: popl %fs; \ CFI_ADJUST_CFA_OFFSET -4;\ - /*CFI_RESTORE gs;*/\ + /*CFI_RESTORE fs;*/\ .pushsection .fixup,"ax"; \ 4: movl $0,(%esp); \ jmp 1b; \ @@ -349,11 +349,11 @@ sysenter_past_esp: movl PT_OLDESP(%esp), %ecx xorl %ebp,%ebp TRACE_IRQS_ON -1: mov PT_GS(%esp), %gs +1: mov PT_FS(%esp), %fs ENABLE_INTERRUPTS_SYSEXIT CFI_ENDPROC .pushsection .fixup,"ax" -2: movl $0,PT_GS(%esp) +2: movl $0,PT_FS(%esp) jmp 1b .section __ex_table,"a" .align 4 @@ -550,7 +550,7 @@ syscall_badsys: #define FIXUP_ESPFIX_STACK \ /* since we are on a wrong stack, we cant make it a C code :( */ \ - movl %gs:PDA_cpu, %ebx; \ + movl %fs:PDA_cpu, %ebx; \ PER_CPU(cpu_gdt_descr, %ebx); \ movl GDS_address(%ebx), %ebx; \ GET_DESC_BASE(GDT_ENTRY_ESPFIX_SS, %ebx, %eax, %ax, %al, %ah); \ @@ -632,7 +632,7 @@ KPROBE_ENTRY(page_fault) CFI_ADJUST_CFA_OFFSET 4 ALIGN error_code: - /* the function address is in %gs's slot on the stack */ + /* the function address is in %fs's slot on the stack */ pushl %es CFI_ADJUST_CFA_OFFSET 4 /*CFI_REL_OFFSET es, 0*/ @@ -661,20 +661,20 @@ error_code: CFI_ADJUST_CFA_OFFSET 4 CFI_REL_OFFSET ebx, 0 cld - pushl %gs + pushl %fs CFI_ADJUST_CFA_OFFSET 4 - /*CFI_REL_OFFSET gs, 0*/ + /*CFI_REL_OFFSET fs, 0*/ movl $(__KERNEL_PDA), %ecx - movl %ecx, %gs + movl %ecx, %fs UNWIND_ESPFIX_STACK popl %ecx CFI_ADJUST_CFA_OFFSET -4 /*CFI_REGISTER es, ecx*/ - movl PT_GS(%esp), %edi # get the function address + movl PT_FS(%esp), %edi # get the function address movl PT_ORIG_EAX(%esp), %edx # get the error code movl $-1, PT_ORIG_EAX(%esp) # no syscall to restart - mov %ecx, PT_GS(%esp) - /*CFI_REL_OFFSET gs, ES*/ + mov %ecx, PT_FS(%esp) + /*CFI_REL_OFFSET fs, ES*/ movl $(__USER_DS), %ecx movl %ecx, %ds movl %ecx, %es diff --git a/arch/i386/kernel/head.S b/arch/i386/kernel/head.S index cb9abdfced9b..15336c8b5960 100644 --- a/arch/i386/kernel/head.S +++ b/arch/i386/kernel/head.S @@ -319,12 +319,12 @@ is386: movl $2,%ecx # set MP movl %eax,%ds movl %eax,%es - xorl %eax,%eax # Clear FS and LDT - movl %eax,%fs + xorl %eax,%eax # Clear GS and LDT + movl %eax,%gs lldt %ax movl $(__KERNEL_PDA),%eax - mov %eax,%gs + mov %eax,%fs cld # gcc2 wants the direction flag cleared at all times pushl $0 # fake return address for unwinder diff --git a/arch/i386/kernel/kprobes.c b/arch/i386/kernel/kprobes.c index af1d53344993..b85cfa3ce1dd 100644 --- a/arch/i386/kernel/kprobes.c +++ b/arch/i386/kernel/kprobes.c @@ -363,7 +363,7 @@ no_kprobe: " pushf\n" /* skip cs, eip, orig_eax */ " subl $12, %esp\n" - " pushl %gs\n" + " pushl %fs\n" " pushl %ds\n" " pushl %es\n" " pushl %eax\n" @@ -387,7 +387,7 @@ no_kprobe: " popl %edi\n" " popl %ebp\n" " popl %eax\n" - /* skip eip, orig_eax, es, ds, gs */ + /* skip eip, orig_eax, es, ds, fs */ " addl $20, %esp\n" " popf\n" " ret\n"); diff --git a/arch/i386/kernel/process.c b/arch/i386/kernel/process.c index c641056233a6..23ae198dbbc3 100644 --- a/arch/i386/kernel/process.c +++ b/arch/i386/kernel/process.c @@ -308,8 +308,8 @@ void show_regs(struct pt_regs * regs) regs->eax,regs->ebx,regs->ecx,regs->edx); printk("ESI: %08lx EDI: %08lx EBP: %08lx", regs->esi, regs->edi, regs->ebp); - printk(" DS: %04x ES: %04x GS: %04x\n", - 0xffff & regs->xds,0xffff & regs->xes, 0xffff & regs->xgs); + printk(" DS: %04x ES: %04x FS: %04x\n", + 0xffff & regs->xds,0xffff & regs->xes, 0xffff & regs->xfs); cr0 = read_cr0(); cr2 = read_cr2(); @@ -340,7 +340,7 @@ int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags) regs.xds = __USER_DS; regs.xes = __USER_DS; - regs.xgs = __KERNEL_PDA; + regs.xfs = __KERNEL_PDA; regs.orig_eax = -1; regs.eip = (unsigned long) kernel_thread_helper; regs.xcs = __KERNEL_CS | get_kernel_rpl(); @@ -425,7 +425,7 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long esp, p->thread.eip = (unsigned long) ret_from_fork; - savesegment(fs,p->thread.fs); + savesegment(gs,p->thread.gs); tsk = current; if (unlikely(test_tsk_thread_flag(tsk, TIF_IO_BITMAP))) { @@ -501,8 +501,8 @@ void dump_thread(struct pt_regs * regs, struct user * dump) dump->regs.eax = regs->eax; dump->regs.ds = regs->xds; dump->regs.es = regs->xes; - savesegment(fs,dump->regs.fs); - dump->regs.gs = regs->xgs; + dump->regs.fs = regs->xfs; + savesegment(gs,dump->regs.gs); dump->regs.orig_eax = regs->orig_eax; dump->regs.eip = regs->eip; dump->regs.cs = regs->xcs; @@ -653,7 +653,7 @@ struct task_struct fastcall * __switch_to(struct task_struct *prev_p, struct tas load_esp0(tss, next); /* - * Save away %fs. No need to save %gs, as it was saved on the + * Save away %gs. No need to save %fs, as it was saved on the * stack on entry. No need to save %es and %ds, as those are * always kernel segments while inside the kernel. Doing this * before setting the new TLS descriptors avoids the situation @@ -662,7 +662,7 @@ struct task_struct fastcall * __switch_to(struct task_struct *prev_p, struct tas * used %fs or %gs (it does not today), or if the kernel is * running inside of a hypervisor layer. */ - savesegment(fs, prev->fs); + savesegment(gs, prev->gs); /* * Load the per-thread Thread-Local Storage descriptor. @@ -670,12 +670,10 @@ struct task_struct fastcall * __switch_to(struct task_struct *prev_p, struct tas load_TLS(next, cpu); /* - * Restore %fs if needed. - * - * Glibc normally makes %fs be zero. + * Restore %gs if needed (which is common) */ - if (unlikely(prev->fs | next->fs)) - loadsegment(fs, next->fs); + if (prev->gs | next->gs) + loadsegment(gs, next->gs); write_pda(pcurrent, next_p); diff --git a/arch/i386/kernel/ptrace.c b/arch/i386/kernel/ptrace.c index af8aabe85800..4a8f8a259723 100644 --- a/arch/i386/kernel/ptrace.c +++ b/arch/i386/kernel/ptrace.c @@ -89,14 +89,14 @@ static int putreg(struct task_struct *child, unsigned long regno, unsigned long value) { switch (regno >> 2) { - case FS: + case GS: if (value && (value & 3) != 3) return -EIO; - child->thread.fs = value; + child->thread.gs = value; return 0; case DS: case ES: - case GS: + case FS: if (value && (value & 3) != 3) return -EIO; value &= 0xffff; @@ -112,7 +112,7 @@ static int putreg(struct task_struct *child, value |= get_stack_long(child, EFL_OFFSET) & ~FLAG_MASK; break; } - if (regno > ES*4) + if (regno > FS*4) regno -= 1*4; put_stack_long(child, regno, value); return 0; @@ -124,18 +124,18 @@ static unsigned long getreg(struct task_struct *child, unsigned long retval = ~0UL; switch (regno >> 2) { - case FS: - retval = child->thread.fs; + case GS: + retval = child->thread.gs; break; case DS: case ES: - case GS: + case FS: case SS: case CS: retval = 0xffff; /* fall through */ default: - if (regno > ES*4) + if (regno > FS*4) regno -= 1*4; retval &= get_stack_long(child, regno); } diff --git a/arch/i386/kernel/signal.c b/arch/i386/kernel/signal.c index 65d7620eaa09..8f4afcc7d2ab 100644 --- a/arch/i386/kernel/signal.c +++ b/arch/i386/kernel/signal.c @@ -128,8 +128,8 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, int *peax X86_EFLAGS_TF | X86_EFLAGS_SF | X86_EFLAGS_ZF | \ X86_EFLAGS_AF | X86_EFLAGS_PF | X86_EFLAGS_CF) - COPY_SEG(gs); - GET_SEG(fs); + GET_SEG(gs); + COPY_SEG(fs); COPY_SEG(es); COPY_SEG(ds); COPY(edi); @@ -244,9 +244,9 @@ setup_sigcontext(struct sigcontext __user *sc, struct _fpstate __user *fpstate, { int tmp, err = 0; - err |= __put_user(regs->xgs, (unsigned int __user *)&sc->gs); - savesegment(fs, tmp); - err |= __put_user(tmp, (unsigned int __user *)&sc->fs); + err |= __put_user(regs->xfs, (unsigned int __user *)&sc->fs); + savesegment(gs, tmp); + err |= __put_user(tmp, (unsigned int __user *)&sc->gs); err |= __put_user(regs->xes, (unsigned int __user *)&sc->es); err |= __put_user(regs->xds, (unsigned int __user *)&sc->ds); diff --git a/arch/i386/kernel/traps.c b/arch/i386/kernel/traps.c index 0efad8aeb41a..4ec21037a361 100644 --- a/arch/i386/kernel/traps.c +++ b/arch/i386/kernel/traps.c @@ -291,10 +291,11 @@ void show_registers(struct pt_regs *regs) int i; int in_kernel = 1; unsigned long esp; - unsigned short ss; + unsigned short ss, gs; esp = (unsigned long) (®s->esp); savesegment(ss, ss); + savesegment(gs, gs); if (user_mode_vm(regs)) { in_kernel = 0; esp = regs->esp; @@ -313,8 +314,8 @@ void show_registers(struct pt_regs *regs) regs->eax, regs->ebx, regs->ecx, regs->edx); printk(KERN_EMERG "esi: %08lx edi: %08lx ebp: %08lx esp: %08lx\n", regs->esi, regs->edi, regs->ebp, esp); - printk(KERN_EMERG "ds: %04x es: %04x ss: %04x\n", - regs->xds & 0xffff, regs->xes & 0xffff, ss); + printk(KERN_EMERG "ds: %04x es: %04x fs: %04x gs: %04x ss: %04x\n", + regs->xds & 0xffff, regs->xes & 0xffff, regs->xfs & 0xffff, gs, ss); printk(KERN_EMERG "Process %.*s (pid: %d, ti=%p task=%p task.ti=%p)", TASK_COMM_LEN, current->comm, current->pid, current_thread_info(), current, current->thread_info); diff --git a/arch/i386/kernel/vm86.c b/arch/i386/kernel/vm86.c index be2f96e67f78..d1b8f2b7aea6 100644 --- a/arch/i386/kernel/vm86.c +++ b/arch/i386/kernel/vm86.c @@ -96,12 +96,12 @@ static int copy_vm86_regs_to_user(struct vm86_regs __user *user, { int ret = 0; - /* kernel_vm86_regs is missing xfs, so copy everything up to - (but not including) xgs, and then rest after xgs. */ - ret += copy_to_user(user, regs, offsetof(struct kernel_vm86_regs, pt.xgs)); - ret += copy_to_user(&user->__null_gs, ®s->pt.xgs, + /* kernel_vm86_regs is missing xgs, so copy everything up to + (but not including) orig_eax, and then rest including orig_eax. */ + ret += copy_to_user(user, regs, offsetof(struct kernel_vm86_regs, pt.orig_eax)); + ret += copy_to_user(&user->orig_eax, ®s->pt.orig_eax, sizeof(struct kernel_vm86_regs) - - offsetof(struct kernel_vm86_regs, pt.xgs)); + offsetof(struct kernel_vm86_regs, pt.orig_eax)); return ret; } @@ -113,12 +113,13 @@ static int copy_vm86_regs_from_user(struct kernel_vm86_regs *regs, { int ret = 0; - ret += copy_from_user(regs, user, offsetof(struct kernel_vm86_regs, pt.xgs)); - ret += copy_from_user(®s->pt.xgs, &user->__null_gs, + /* copy eax-xfs inclusive */ + ret += copy_from_user(regs, user, offsetof(struct kernel_vm86_regs, pt.orig_eax)); + /* copy orig_eax-__gsh+extra */ + ret += copy_from_user(®s->pt.orig_eax, &user->orig_eax, sizeof(struct kernel_vm86_regs) - - offsetof(struct kernel_vm86_regs, pt.xgs) + + offsetof(struct kernel_vm86_regs, pt.orig_eax) + extra); - return ret; } @@ -157,8 +158,8 @@ struct pt_regs * fastcall save_v86_state(struct kernel_vm86_regs * regs) ret = KVM86->regs32; - loadsegment(fs, current->thread.saved_fs); - ret->xgs = current->thread.saved_gs; + ret->xfs = current->thread.saved_fs; + loadsegment(gs, current->thread.saved_gs); return ret; } @@ -285,9 +286,9 @@ static void do_sys_vm86(struct kernel_vm86_struct *info, struct task_struct *tsk */ info->regs.pt.xds = 0; info->regs.pt.xes = 0; - info->regs.pt.xgs = 0; + info->regs.pt.xfs = 0; -/* we are clearing fs later just before "jmp resume_userspace", +/* we are clearing gs later just before "jmp resume_userspace", * because it is not saved/restored. */ @@ -321,8 +322,8 @@ static void do_sys_vm86(struct kernel_vm86_struct *info, struct task_struct *tsk */ info->regs32->eax = 0; tsk->thread.saved_esp0 = tsk->thread.esp0; - savesegment(fs, tsk->thread.saved_fs); - tsk->thread.saved_gs = info->regs32->xgs; + tsk->thread.saved_fs = info->regs32->xfs; + savesegment(gs, tsk->thread.saved_gs); tss = &per_cpu(init_tss, get_cpu()); tsk->thread.esp0 = (unsigned long) &info->VM86_TSS_ESP0; @@ -342,7 +343,7 @@ static void do_sys_vm86(struct kernel_vm86_struct *info, struct task_struct *tsk __asm__ __volatile__( "movl %0,%%esp\n\t" "movl %1,%%ebp\n\t" - "mov %2, %%fs\n\t" + "mov %2, %%gs\n\t" "jmp resume_userspace" : /* no outputs */ :"r" (&info->regs), "r" (task_thread_info(tsk)), "r" (0)); diff --git a/arch/i386/math-emu/get_address.c b/arch/i386/math-emu/get_address.c index 9819b705efa4..2e2c51a8bd3a 100644 --- a/arch/i386/math-emu/get_address.c +++ b/arch/i386/math-emu/get_address.c @@ -56,15 +56,14 @@ static int reg_offset_vm86[] = { #define VM86_REG_(x) (*(unsigned short *) \ (reg_offset_vm86[((unsigned)x)]+(u_char *) FPU_info)) -/* These are dummy, fs and gs are not saved on the stack. */ -#define ___FS ___ds +/* This dummy, gs is not saved on the stack. */ #define ___GS ___ds static int reg_offset_pm[] = { offsetof(struct info,___cs), offsetof(struct info,___ds), offsetof(struct info,___es), - offsetof(struct info,___FS), + offsetof(struct info,___fs), offsetof(struct info,___GS), offsetof(struct info,___ss), offsetof(struct info,___ds) @@ -169,13 +168,10 @@ static long pm_address(u_char FPU_modrm, u_char segment, switch ( segment ) { - /* fs and gs aren't used by the kernel, so they still have their - user-space values. */ - case PREFIX_FS_-1: - /* N.B. - movl %seg, mem is a 2 byte write regardless of prefix */ - savesegment(fs, addr->selector); - break; + /* gs isn't used by the kernel, so it still has its + user-space value. */ case PREFIX_GS_-1: + /* N.B. - movl %seg, mem is a 2 byte write regardless of prefix */ savesegment(gs, addr->selector); break; default: -- cgit v1.2.3 From 2e188938ab2358034801938c2329b016ca135823 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Tue, 13 Feb 2007 13:26:20 +0100 Subject: [PATCH] i386: Fix a typo in an IRQ handler name The "fasteoi" IRQ handler is named "fasteio" incorrectly. This is a fix. Signed-off-by: Maciej W. Rozycki Signed-off-by: Andi Kleen Cc: Andi Kleen Signed-off-by: Andrew Morton --- arch/i386/kernel/io_apic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c index ba8d302a0b72..1711f4e1093f 100644 --- a/arch/i386/kernel/io_apic.c +++ b/arch/i386/kernel/io_apic.c @@ -2310,7 +2310,7 @@ static inline void __init check_timer(void) disable_8259A_irq(0); set_irq_chip_and_handler_name(0, &lapic_chip, handle_fasteoi_irq, - "fasteio"); + "fasteoi"); apic_write_around(APIC_LVT0, APIC_DM_FIXED | vector); /* Fixed mode */ enable_8259A_irq(0); -- cgit v1.2.3 From b78673944b22b662b270c8bba5c198f19e4ee4e1 Mon Sep 17 00:00:00 2001 From: Olivier Galibert Date: Tue, 13 Feb 2007 13:26:20 +0100 Subject: [PATCH] mmconfig: Share parts of mmconfig code between i386 and x86-64 i386 and x86-64 pci mmconfig code have a lot in common. So share what's shareable between the two. Signed-off-by: Olivier Galibert Signed-off-by: Andi Kleen Cc: Andi Kleen Signed-off-by: Andrew Morton --- arch/i386/pci/Makefile | 2 +- arch/i386/pci/mmconfig-shared.c | 86 +++++++++++++++++++++++++++++++++++++++++ arch/i386/pci/mmconfig.c | 74 ++--------------------------------- arch/i386/pci/pci.h | 6 +++ arch/x86_64/pci/Makefile | 3 +- arch/x86_64/pci/mmconfig.c | 76 ++++++------------------------------ 6 files changed, 111 insertions(+), 136 deletions(-) create mode 100644 arch/i386/pci/mmconfig-shared.c (limited to 'arch') diff --git a/arch/i386/pci/Makefile b/arch/i386/pci/Makefile index 1594d2f55c8f..44650e03308b 100644 --- a/arch/i386/pci/Makefile +++ b/arch/i386/pci/Makefile @@ -1,7 +1,7 @@ obj-y := i386.o init.o obj-$(CONFIG_PCI_BIOS) += pcbios.o -obj-$(CONFIG_PCI_MMCONFIG) += mmconfig.o direct.o +obj-$(CONFIG_PCI_MMCONFIG) += mmconfig.o direct.o mmconfig-shared.o obj-$(CONFIG_PCI_DIRECT) += direct.o pci-y := fixup.o diff --git a/arch/i386/pci/mmconfig-shared.c b/arch/i386/pci/mmconfig-shared.c new file mode 100644 index 000000000000..998e04f6d68f --- /dev/null +++ b/arch/i386/pci/mmconfig-shared.c @@ -0,0 +1,86 @@ +/* + * mmconfig-shared.c - Low-level direct PCI config space access via + * MMCONFIG - common code between i386 and x86-64. + * + * This code does: + * - ACPI decoding and validation + * + * Per-architecture code takes care of the mappings and accesses + * themselves. + */ + +#include +#include +#include +#include +#include + +#include "pci.h" + +/* aperture is up to 256MB but BIOS may reserve less */ +#define MMCONFIG_APER_MIN (2 * 1024*1024) +#define MMCONFIG_APER_MAX (256 * 1024*1024) + +/* Verify the first 16 busses. We assume that systems with more busses + get MCFG right. */ +#define PCI_MMCFG_MAX_CHECK_BUS 16 + +DECLARE_BITMAP(pci_mmcfg_fallback_slots, 32*PCI_MMCFG_MAX_CHECK_BUS); + +/* K8 systems have some devices (typically in the builtin northbridge) + that are only accessible using type1 + Normally this can be expressed in the MCFG by not listing them + and assigning suitable _SEGs, but this isn't implemented in some BIOS. + Instead try to discover all devices on bus 0 that are unreachable using MM + and fallback for them. */ +static __init void unreachable_devices(void) +{ + int i, k; + /* Use the max bus number from ACPI here? */ + for (k = 0; k < PCI_MMCFG_MAX_CHECK_BUS; k++) { + for (i = 0; i < 32; i++) { + u32 val1, val2; + + pci_conf1_read(0, k, PCI_DEVFN(i,0), 0, 4, &val1); + if (val1 == 0xffffffff) + continue; + + raw_pci_ops->read(0, k, PCI_DEVFN(i, 0), 0, 4, &val2); + if (val1 != val2) { + set_bit(i + 32*k, pci_mmcfg_fallback_slots); + printk(KERN_NOTICE "PCI: No mmconfig possible" + " on device %02x:%02x\n", k, i); + } + } + } +} + +void __init pci_mmcfg_init(int type) +{ + if ((pci_probe & PCI_PROBE_MMCONF) == 0) + return; + + acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg); + + if ((pci_mmcfg_config_num == 0) || + (pci_mmcfg_config == NULL) || + (pci_mmcfg_config[0].address == 0)) + return; + + /* Only do this check when type 1 works. If it doesn't work + assume we run on a Mac and always use MCFG */ + if (type == 1 && + !e820_all_mapped(pci_mmcfg_config[0].address, + pci_mmcfg_config[0].address + MMCONFIG_APER_MIN, + E820_RESERVED)) { + printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %Lx is not E820-reserved\n", + pci_mmcfg_config[0].address); + printk(KERN_ERR "PCI: Not using MMCONFIG.\n"); + return; + } + + if (pci_mmcfg_arch_init()) { + unreachable_devices(); + pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF; + } +} diff --git a/arch/i386/pci/mmconfig.c b/arch/i386/pci/mmconfig.c index 5700220dcf5f..97dcaaa0de0f 100644 --- a/arch/i386/pci/mmconfig.c +++ b/arch/i386/pci/mmconfig.c @@ -15,21 +15,13 @@ #include #include "pci.h" -/* aperture is up to 256MB but BIOS may reserve less */ -#define MMCONFIG_APER_MIN (2 * 1024*1024) -#define MMCONFIG_APER_MAX (256 * 1024*1024) - /* Assume systems with more busses have correct MCFG */ -#define MAX_CHECK_BUS 16 - #define mmcfg_virt_addr ((void __iomem *) fix_to_virt(FIX_PCIE_MCFG)) /* The base address of the last MMCONFIG device accessed */ static u32 mmcfg_last_accessed_device; static int mmcfg_last_accessed_cpu; -static DECLARE_BITMAP(fallback_slots, MAX_CHECK_BUS*32); - /* * Functions for accessing PCI configuration space with MMCONFIG accesses */ @@ -38,8 +30,8 @@ static u32 get_base_addr(unsigned int seg, int bus, unsigned devfn) int cfg_num = -1; struct acpi_mcfg_allocation *cfg; - if (seg == 0 && bus < MAX_CHECK_BUS && - test_bit(PCI_SLOT(devfn) + 32*bus, fallback_slots)) + if (seg == 0 && bus < PCI_MMCFG_MAX_CHECK_BUS && + test_bit(PCI_SLOT(devfn) + 32*bus, pci_mmcfg_fallback_slots)) return 0; while (1) { @@ -158,67 +150,9 @@ static struct pci_raw_ops pci_mmcfg = { .write = pci_mmcfg_write, }; -/* K8 systems have some devices (typically in the builtin northbridge) - that are only accessible using type1 - Normally this can be expressed in the MCFG by not listing them - and assigning suitable _SEGs, but this isn't implemented in some BIOS. - Instead try to discover all devices on bus 0 that are unreachable using MM - and fallback for them. */ -static __init void unreachable_devices(void) +int __init pci_mmcfg_arch_init(void) { - int i, k; - unsigned long flags; - - for (k = 0; k < MAX_CHECK_BUS; k++) { - for (i = 0; i < 32; i++) { - u32 val1; - u32 addr; - - pci_conf1_read(0, k, PCI_DEVFN(i, 0), 0, 4, &val1); - if (val1 == 0xffffffff) - continue; - - /* Locking probably not needed, but safer */ - spin_lock_irqsave(&pci_config_lock, flags); - addr = get_base_addr(0, k, PCI_DEVFN(i, 0)); - if (addr != 0) - pci_exp_set_dev_base(addr, k, PCI_DEVFN(i, 0)); - if (addr == 0 || - readl((u32 __iomem *)mmcfg_virt_addr) != val1) { - set_bit(i + 32*k, fallback_slots); - printk(KERN_NOTICE - "PCI: No mmconfig possible on %x:%x\n", k, i); - } - spin_unlock_irqrestore(&pci_config_lock, flags); - } - } -} - -void __init pci_mmcfg_init(int type) -{ - if ((pci_probe & PCI_PROBE_MMCONF) == 0) - return; - - acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg); - if ((pci_mmcfg_config_num == 0) || - (pci_mmcfg_config == NULL) || - (pci_mmcfg_config[0].address == 0)) - return; - - /* Only do this check when type 1 works. If it doesn't work - assume we run on a Mac and always use MCFG */ - if (type == 1 && !e820_all_mapped(pci_mmcfg_config[0].address, - pci_mmcfg_config[0].address + MMCONFIG_APER_MIN, - E820_RESERVED)) { - printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %lx is not E820-reserved\n", - (unsigned long)pci_mmcfg_config[0].address); - printk(KERN_ERR "PCI: Not using MMCONFIG.\n"); - return; - } - printk(KERN_INFO "PCI: Using MMCONFIG\n"); raw_pci_ops = &pci_mmcfg; - pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF; - - unreachable_devices(); + return 1; } diff --git a/arch/i386/pci/pci.h b/arch/i386/pci/pci.h index a0a25180b61a..0270c80d99cc 100644 --- a/arch/i386/pci/pci.h +++ b/arch/i386/pci/pci.h @@ -94,3 +94,9 @@ extern void pci_pcbios_init(void); extern void pci_mmcfg_init(int type); extern void pcibios_sort(void); +/* pci-mmconfig.c */ + +#define PCI_MMCFG_MAX_CHECK_BUS 16 +extern DECLARE_BITMAP(pci_mmcfg_fallback_slots, 32*PCI_MMCFG_MAX_CHECK_BUS); + +extern int pci_mmcfg_arch_init(void); diff --git a/arch/x86_64/pci/Makefile b/arch/x86_64/pci/Makefile index 149aba05a5b8..c9eddc8859c0 100644 --- a/arch/x86_64/pci/Makefile +++ b/arch/x86_64/pci/Makefile @@ -11,7 +11,7 @@ obj-y += fixup.o init.o obj-$(CONFIG_ACPI) += acpi.o obj-y += legacy.o irq.o common.o early.o # mmconfig has a 64bit special -obj-$(CONFIG_PCI_MMCONFIG) += mmconfig.o direct.o +obj-$(CONFIG_PCI_MMCONFIG) += mmconfig.o direct.o mmconfig-shared.o obj-$(CONFIG_NUMA) += k8-bus.o @@ -24,3 +24,4 @@ fixup-y += ../../i386/pci/fixup.o i386-y += ../../i386/pci/i386.o init-y += ../../i386/pci/init.o early-y += ../../i386/pci/early.o +mmconfig-shared-y += ../../i386/pci/mmconfig-shared.o diff --git a/arch/x86_64/pci/mmconfig.c b/arch/x86_64/pci/mmconfig.c index faabb6e87f12..0847735bb31e 100644 --- a/arch/x86_64/pci/mmconfig.c +++ b/arch/x86_64/pci/mmconfig.c @@ -19,9 +19,7 @@ /* Verify the first 16 busses. We assume that systems with more busses get MCFG right. */ -#define MAX_CHECK_BUS 16 - -static DECLARE_BITMAP(fallback_slots, 32*MAX_CHECK_BUS); +#define PCI_MMCFG_MAX_CHECK_BUS 16 /* Static virtual mapping of the MMCONFIG aperture */ struct mmcfg_virt { @@ -63,8 +61,8 @@ static char __iomem *get_virt(unsigned int seg, unsigned bus) static char __iomem *pci_dev_base(unsigned int seg, unsigned int bus, unsigned int devfn) { char __iomem *addr; - if (seg == 0 && bus < MAX_CHECK_BUS && - test_bit(32*bus + PCI_SLOT(devfn), fallback_slots)) + if (seg == 0 && bus < PCI_MMCFG_MAX_CHECK_BUS && + test_bit(32*bus + PCI_SLOT(devfn), pci_mmcfg_fallback_slots)) return NULL; addr = get_virt(seg, bus); if (!addr) @@ -135,63 +133,16 @@ static struct pci_raw_ops pci_mmcfg = { .write = pci_mmcfg_write, }; -/* K8 systems have some devices (typically in the builtin northbridge) - that are only accessible using type1 - Normally this can be expressed in the MCFG by not listing them - and assigning suitable _SEGs, but this isn't implemented in some BIOS. - Instead try to discover all devices on bus 0 that are unreachable using MM - and fallback for them. */ -static __init void unreachable_devices(void) -{ - int i, k; - /* Use the max bus number from ACPI here? */ - for (k = 0; k < MAX_CHECK_BUS; k++) { - for (i = 0; i < 32; i++) { - u32 val1; - char __iomem *addr; - - pci_conf1_read(0, k, PCI_DEVFN(i,0), 0, 4, &val1); - if (val1 == 0xffffffff) - continue; - addr = pci_dev_base(0, k, PCI_DEVFN(i, 0)); - if (addr == NULL|| readl(addr) != val1) { - set_bit(i + 32*k, fallback_slots); - printk(KERN_NOTICE "PCI: No mmconfig possible" - " on device %02x:%02x\n", k, i); - } - } - } -} - -void __init pci_mmcfg_init(int type) +int __init pci_mmcfg_arch_init(void) { int i; - - if ((pci_probe & PCI_PROBE_MMCONF) == 0) - return; - - acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg); - if ((pci_mmcfg_config_num == 0) || - (pci_mmcfg_config == NULL) || - (pci_mmcfg_config[0].address == 0)) - return; - - /* Only do this check when type 1 works. If it doesn't work - assume we run on a Mac and always use MCFG */ - if (type == 1 && !e820_all_mapped(pci_mmcfg_config[0].address, - pci_mmcfg_config[0].address + MMCONFIG_APER_MIN, - E820_RESERVED)) { - printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %lx is not E820-reserved\n", - (unsigned long)pci_mmcfg_config[0].address); - printk(KERN_ERR "PCI: Not using MMCONFIG.\n"); - return; - } - - pci_mmcfg_virt = kmalloc(sizeof(*pci_mmcfg_virt) * pci_mmcfg_config_num, GFP_KERNEL); + pci_mmcfg_virt = kmalloc(sizeof(*pci_mmcfg_virt) * + pci_mmcfg_config_num, GFP_KERNEL); if (pci_mmcfg_virt == NULL) { printk(KERN_ERR "PCI: Can not allocate memory for mmconfig structures\n"); - return; + return 0; } + for (i = 0; i < pci_mmcfg_config_num; ++i) { pci_mmcfg_virt[i].cfg = &pci_mmcfg_config[i]; pci_mmcfg_virt[i].virt = ioremap_nocache(pci_mmcfg_config[i].address, @@ -200,14 +151,11 @@ void __init pci_mmcfg_init(int type) printk(KERN_ERR "PCI: Cannot map mmconfig aperture for " "segment %d\n", pci_mmcfg_config[i].pci_segment); - return; + return 0; } - printk(KERN_INFO "PCI: Using MMCONFIG at %lx\n", - (unsigned long)pci_mmcfg_config[i].address); + printk(KERN_INFO "PCI: Using MMCONFIG at %Lx\n", + pci_mmcfg_config[i].address); } - - unreachable_devices(); - raw_pci_ops = &pci_mmcfg; - pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF; + return 1; } -- cgit v1.2.3 From 5f027387bbdb5a4a4c1babd557fd976cd09d7495 Mon Sep 17 00:00:00 2001 From: Olivier Galibert Date: Tue, 13 Feb 2007 13:26:20 +0100 Subject: [PATCH] i386: Only call unreachable_devices() when type 1 is available. unreachable_devices compares between the results of pci configuration accesses through type1 and mmconfig, so it should be called only if type1 actually works in the first place. Signed-off-by: Olivier Galibert Signed-off-by: Andi Kleen Cc: Andi Kleen Signed-off-by: Andrew Morton --- arch/i386/pci/mmconfig-shared.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/i386/pci/mmconfig-shared.c b/arch/i386/pci/mmconfig-shared.c index 998e04f6d68f..779c987acc5b 100644 --- a/arch/i386/pci/mmconfig-shared.c +++ b/arch/i386/pci/mmconfig-shared.c @@ -80,7 +80,8 @@ void __init pci_mmcfg_init(int type) } if (pci_mmcfg_arch_init()) { - unreachable_devices(); + if (type == 1) + unreachable_devices(); pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF; } } -- cgit v1.2.3 From 9358c693c5ac1afde28f24ac651f7903d32a850c Mon Sep 17 00:00:00 2001 From: Olivier Galibert Date: Tue, 13 Feb 2007 13:26:20 +0100 Subject: [PATCH] mmconfig: Detect and support the E7520 and the 945G/GZ/P/PL It seems that the only way to reliably support mmconfig in the presence of funky biosen is to detect the hostbridge and read where the window is mapped from its registers. Do that for the E7520 and the 945G/GZ/P/PL for a start. Signed-off-by: Olivier Galibert Signed-off-by: Andi Kleen Cc: Andi Kleen Signed-off-by: Andrew Morton --- arch/i386/pci/mmconfig-shared.c | 121 +++++++++++++++++++++++++++++++++++++++- 1 file changed, 119 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/i386/pci/mmconfig-shared.c b/arch/i386/pci/mmconfig-shared.c index 779c987acc5b..d72f0439147c 100644 --- a/arch/i386/pci/mmconfig-shared.c +++ b/arch/i386/pci/mmconfig-shared.c @@ -3,6 +3,7 @@ * MMCONFIG - common code between i386 and x86-64. * * This code does: + * - known chipset handling * - ACPI decoding and validation * * Per-architecture code takes care of the mappings and accesses @@ -55,12 +56,128 @@ static __init void unreachable_devices(void) } } +static __init const char *pci_mmcfg_e7520(void) +{ + u32 win; + pci_conf1_read(0, 0, PCI_DEVFN(0,0), 0xce, 2, &win); + + pci_mmcfg_config_num = 1; + pci_mmcfg_config = kzalloc(sizeof(pci_mmcfg_config[0]), GFP_KERNEL); + if (!pci_mmcfg_config) + return NULL; + pci_mmcfg_config[0].address = (win & 0xf000) << 16; + pci_mmcfg_config[0].pci_segment = 0; + pci_mmcfg_config[0].start_bus_number = 0; + pci_mmcfg_config[0].end_bus_number = 255; + + return "Intel Corporation E7520 Memory Controller Hub"; +} + +static __init const char *pci_mmcfg_intel_945(void) +{ + u32 pciexbar, mask = 0, len = 0; + + pci_mmcfg_config_num = 1; + + pci_conf1_read(0, 0, PCI_DEVFN(0,0), 0x48, 4, &pciexbar); + + /* Enable bit */ + if (!(pciexbar & 1)) + pci_mmcfg_config_num = 0; + + /* Size bits */ + switch ((pciexbar >> 1) & 3) { + case 0: + mask = 0xf0000000U; + len = 0x10000000U; + break; + case 1: + mask = 0xf8000000U; + len = 0x08000000U; + break; + case 2: + mask = 0xfc000000U; + len = 0x04000000U; + break; + default: + pci_mmcfg_config_num = 0; + } + + /* Errata #2, things break when not aligned on a 256Mb boundary */ + /* Can only happen in 64M/128M mode */ + + if ((pciexbar & mask) & 0x0fffffffU) + pci_mmcfg_config_num = 0; + + if (pci_mmcfg_config_num) { + pci_mmcfg_config = kzalloc(sizeof(pci_mmcfg_config[0]), GFP_KERNEL); + if (!pci_mmcfg_config) + return NULL; + pci_mmcfg_config[0].address = pciexbar & mask; + pci_mmcfg_config[0].pci_segment = 0; + pci_mmcfg_config[0].start_bus_number = 0; + pci_mmcfg_config[0].end_bus_number = (len >> 20) - 1; + } + + return "Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub"; +} + +struct pci_mmcfg_hostbridge_probe { + u32 vendor; + u32 device; + const char *(*probe)(void); +}; + +static __initdata struct pci_mmcfg_hostbridge_probe pci_mmcfg_probes[] = { + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, pci_mmcfg_e7520 }, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82945G_HB, pci_mmcfg_intel_945 }, +}; + +static int __init pci_mmcfg_check_hostbridge(void) +{ + u32 l; + u16 vendor, device; + int i; + const char *name; + + pci_conf1_read(0, 0, PCI_DEVFN(0,0), 0, 4, &l); + vendor = l & 0xffff; + device = (l >> 16) & 0xffff; + + pci_mmcfg_config_num = 0; + pci_mmcfg_config = NULL; + name = NULL; + + for (i = 0; !name && i < ARRAY_SIZE(pci_mmcfg_probes); i++) + if ((pci_mmcfg_probes[i].vendor == PCI_ANY_ID || + pci_mmcfg_probes[i].vendor == vendor) && + (pci_mmcfg_probes[i].device == PCI_ANY_ID || + pci_mmcfg_probes[i].device == device)) + name = pci_mmcfg_probes[i].probe(); + + if (name) { + if (pci_mmcfg_config_num) + printk(KERN_INFO "PCI: Found %s with MMCONFIG support.\n", name); + else + printk(KERN_INFO "PCI: Found %s without MMCONFIG support.\n", + name); + } + + return name != NULL; +} + void __init pci_mmcfg_init(int type) { + int known_bridge = 0; + if ((pci_probe & PCI_PROBE_MMCONF) == 0) return; - acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg); + if (type == 1 && pci_mmcfg_check_hostbridge()) + known_bridge = 1; + + if (!known_bridge) + acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg); if ((pci_mmcfg_config_num == 0) || (pci_mmcfg_config == NULL) || @@ -69,7 +186,7 @@ void __init pci_mmcfg_init(int type) /* Only do this check when type 1 works. If it doesn't work assume we run on a Mac and always use MCFG */ - if (type == 1 && + if (type == 1 && !known_bridge && !e820_all_mapped(pci_mmcfg_config[0].address, pci_mmcfg_config[0].address + MMCONFIG_APER_MIN, E820_RESERVED)) { -- cgit v1.2.3 From 6a0668fc41fa479df617151c2d4e297299a4ffe2 Mon Sep 17 00:00:00 2001 From: Olivier Galibert Date: Tue, 13 Feb 2007 13:26:20 +0100 Subject: [PATCH] mmconfig: Reserve resources but only when we're sure about them. Put back the resource reservation as per 4c6e052adfe285ede5884e4e8c4d33af33932c13 but use it *only* when the range(s) come from a chipset probe instead of the bios. Signed-off-by: Olivier Galibert Signed-off-by: Andi Kleen Cc: Andi Kleen Signed-off-by: Andrew Morton --- arch/i386/pci/mmconfig-shared.c | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) (limited to 'arch') diff --git a/arch/i386/pci/mmconfig-shared.c b/arch/i386/pci/mmconfig-shared.c index d72f0439147c..4757554b08cf 100644 --- a/arch/i386/pci/mmconfig-shared.c +++ b/arch/i386/pci/mmconfig-shared.c @@ -166,6 +166,37 @@ static int __init pci_mmcfg_check_hostbridge(void) return name != NULL; } +static __init void pci_mmcfg_insert_resources(void) +{ +#define PCI_MMCFG_RESOURCE_NAME_LEN 19 + int i; + struct resource *res; + char *names; + unsigned num_buses; + + res = kcalloc(PCI_MMCFG_RESOURCE_NAME_LEN + sizeof(*res), + pci_mmcfg_config_num, GFP_KERNEL); + + if (!res) { + printk(KERN_ERR "PCI: Unable to allocate MMCONFIG resources\n"); + return; + } + + names = (void *)&res[pci_mmcfg_config_num]; + for (i = 0; i < pci_mmcfg_config_num; i++, res++) { + num_buses = pci_mmcfg_config[i].end_bus_number - + pci_mmcfg_config[i].start_bus_number + 1; + res->name = names; + snprintf(names, PCI_MMCFG_RESOURCE_NAME_LEN, "PCI MMCONFIG %u", + pci_mmcfg_config[i].pci_segment); + res->start = pci_mmcfg_config[i].address; + res->end = res->start + (num_buses << 20) - 1; + res->flags = IORESOURCE_MEM | IORESOURCE_BUSY; + insert_resource(&iomem_resource, res); + names += PCI_MMCFG_RESOURCE_NAME_LEN; + } +} + void __init pci_mmcfg_init(int type) { int known_bridge = 0; @@ -199,6 +230,8 @@ void __init pci_mmcfg_init(int type) if (pci_mmcfg_arch_init()) { if (type == 1) unreachable_devices(); + if (known_bridge) + pci_mmcfg_insert_resources(); pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF; } } -- cgit v1.2.3 From faed197b7b44a6c4e6b81dd2db649fd452b0a7ef Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Tue, 13 Feb 2007 13:26:20 +0100 Subject: [PATCH] mmconfig: Fix x86_64 ioremap base_address Current mmconfig has some problems of remapped range. a) In the case of broken MCFG tables on Asus etc., we need to remap 256M range, but currently only remap 1M. b) The base address always corresponds to bus number 0, but currently we are assuming it corresponds to start bus number. This patch fixes the above problems. (akpm: Arjan suggests that if the MCFG table is broken we just shouldn't use it, rather than try to work around things). Signed-off-by: OGAWA Hirofumi Signed-off-by: Andi Kleen Cc: Arjan van de Ven Cc: Andi Kleen Signed-off-by: Andrew Morton --- arch/x86_64/pci/mmconfig.c | 46 +++++++++++++++++++++++++++++++++++----------- 1 file changed, 35 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/pci/mmconfig.c b/arch/x86_64/pci/mmconfig.c index 0847735bb31e..8e05449660fe 100644 --- a/arch/x86_64/pci/mmconfig.c +++ b/arch/x86_64/pci/mmconfig.c @@ -28,6 +28,39 @@ struct mmcfg_virt { }; static struct mmcfg_virt *pci_mmcfg_virt; +static inline int mcfg_broken(void) +{ + struct acpi_mcfg_allocation *cfg = &pci_mmcfg_config[0]; + + /* Handle more broken MCFG tables on Asus etc. + They only contain a single entry for bus 0-0. Assume + this applies to all busses. */ + if (pci_mmcfg_config_num == 1 && + cfg->pci_segment_group_number == 0 && + (cfg->start_bus_number | cfg->end_bus_number) == 0) + return 1; + return 0; +} + +static void __iomem *mcfg_ioremap(struct acpi_mcfg_allocation *cfg) +{ + void __iomem *addr; + u32 size; + + if (mcfg_broken()) + size = 256 << 20; + else + size = (cfg->end_bus_number + 1) << 20; + + addr = ioremap_nocache(cfg->base_address, size); + if (addr) { + printk(KERN_INFO "PCI: Using MMCONFIG at %x - %x\n", + cfg->base_address, + cfg->base_address + size - 1); + } + return addr; +} + static char __iomem *get_virt(unsigned int seg, unsigned bus) { int cfg_num = -1; @@ -45,13 +78,7 @@ static char __iomem *get_virt(unsigned int seg, unsigned bus) return pci_mmcfg_virt[cfg_num].virt; } - /* Handle more broken MCFG tables on Asus etc. - They only contain a single entry for bus 0-0. Assume - this applies to all busses. */ - cfg = &pci_mmcfg_config[0]; - if (pci_mmcfg_config_num == 1 && - cfg->pci_segment == 0 && - (cfg->start_bus_number | cfg->end_bus_number) == 0) + if (mcfg_broken()) return pci_mmcfg_virt[0].virt; /* Fall back to type 0 */ @@ -145,16 +172,13 @@ int __init pci_mmcfg_arch_init(void) for (i = 0; i < pci_mmcfg_config_num; ++i) { pci_mmcfg_virt[i].cfg = &pci_mmcfg_config[i]; - pci_mmcfg_virt[i].virt = ioremap_nocache(pci_mmcfg_config[i].address, - MMCONFIG_APER_MAX); + pci_mmcfg_virt[i].virt = mcfg_ioremap(&pci_mmcfg_config[i]); if (!pci_mmcfg_virt[i].virt) { printk(KERN_ERR "PCI: Cannot map mmconfig aperture for " "segment %d\n", pci_mmcfg_config[i].pci_segment); return 0; } - printk(KERN_INFO "PCI: Using MMCONFIG at %Lx\n", - pci_mmcfg_config[i].address); } raw_pci_ops = &pci_mmcfg; return 1; -- cgit v1.2.3 From 44de0203fab205417b24322272c53ee0883c36e7 Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Tue, 13 Feb 2007 13:26:20 +0100 Subject: [PATCH] mmconfig: Reject a broken MCFG tables on Asus etc This rejects broken MCFG tables on Asus. When the table looks bogus just disable mmconfig Arjan and Andi suggested this. Signed-off-by: OGAWA Hirofumi Signed-off-by: Andi Kleen --- arch/i386/pci/mmconfig-shared.c | 24 +++++++++++++++++++- arch/i386/pci/mmconfig.c | 9 -------- arch/x86_64/pci/mmconfig.c | 50 ++++++++++++----------------------------- 3 files changed, 37 insertions(+), 46 deletions(-) (limited to 'arch') diff --git a/arch/i386/pci/mmconfig-shared.c b/arch/i386/pci/mmconfig-shared.c index 4757554b08cf..77de6de94f1f 100644 --- a/arch/i386/pci/mmconfig-shared.c +++ b/arch/i386/pci/mmconfig-shared.c @@ -197,6 +197,26 @@ static __init void pci_mmcfg_insert_resources(void) } } +static void __init pci_mmcfg_reject_broken(void) +{ + typeof(pci_mmcfg_config[0]) *cfg = &pci_mmcfg_config[0]; + + /* + * Handle more broken MCFG tables on Asus etc. + * They only contain a single entry for bus 0-0. + */ + if (pci_mmcfg_config_num == 1 && + cfg->pci_segment == 0 && + (cfg->start_bus_number | cfg->end_bus_number) == 0) { + kfree(pci_mmcfg_config); + pci_mmcfg_config = NULL; + pci_mmcfg_config_num = 0; + + printk(KERN_ERR "PCI: start and end of bus number is 0. " + "Rejected as broken MCFG."); + } +} + void __init pci_mmcfg_init(int type) { int known_bridge = 0; @@ -207,8 +227,10 @@ void __init pci_mmcfg_init(int type) if (type == 1 && pci_mmcfg_check_hostbridge()) known_bridge = 1; - if (!known_bridge) + if (!known_bridge) { acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg); + pci_mmcfg_reject_broken(); + } if ((pci_mmcfg_config_num == 0) || (pci_mmcfg_config == NULL) || diff --git a/arch/i386/pci/mmconfig.c b/arch/i386/pci/mmconfig.c index 97dcaaa0de0f..3325b79e651c 100644 --- a/arch/i386/pci/mmconfig.c +++ b/arch/i386/pci/mmconfig.c @@ -47,15 +47,6 @@ static u32 get_base_addr(unsigned int seg, int bus, unsigned devfn) return cfg->address; } - /* Handle more broken MCFG tables on Asus etc. - They only contain a single entry for bus 0-0. Assume - this applies to all busses. */ - cfg = &pci_mmcfg_config[0]; - if (pci_mmcfg_config_num == 1 && - cfg->pci_segment == 0 && - (cfg->start_bus_number | cfg->end_bus_number) == 0) - return cfg->address; - /* Fall back to type 0 */ return 0; } diff --git a/arch/x86_64/pci/mmconfig.c b/arch/x86_64/pci/mmconfig.c index 8e05449660fe..78e50b2c5cc5 100644 --- a/arch/x86_64/pci/mmconfig.c +++ b/arch/x86_64/pci/mmconfig.c @@ -28,39 +28,6 @@ struct mmcfg_virt { }; static struct mmcfg_virt *pci_mmcfg_virt; -static inline int mcfg_broken(void) -{ - struct acpi_mcfg_allocation *cfg = &pci_mmcfg_config[0]; - - /* Handle more broken MCFG tables on Asus etc. - They only contain a single entry for bus 0-0. Assume - this applies to all busses. */ - if (pci_mmcfg_config_num == 1 && - cfg->pci_segment_group_number == 0 && - (cfg->start_bus_number | cfg->end_bus_number) == 0) - return 1; - return 0; -} - -static void __iomem *mcfg_ioremap(struct acpi_mcfg_allocation *cfg) -{ - void __iomem *addr; - u32 size; - - if (mcfg_broken()) - size = 256 << 20; - else - size = (cfg->end_bus_number + 1) << 20; - - addr = ioremap_nocache(cfg->base_address, size); - if (addr) { - printk(KERN_INFO "PCI: Using MMCONFIG at %x - %x\n", - cfg->base_address, - cfg->base_address + size - 1); - } - return addr; -} - static char __iomem *get_virt(unsigned int seg, unsigned bus) { int cfg_num = -1; @@ -78,9 +45,6 @@ static char __iomem *get_virt(unsigned int seg, unsigned bus) return pci_mmcfg_virt[cfg_num].virt; } - if (mcfg_broken()) - return pci_mmcfg_virt[0].virt; - /* Fall back to type 0 */ return NULL; } @@ -160,6 +124,20 @@ static struct pci_raw_ops pci_mmcfg = { .write = pci_mmcfg_write, }; +static void __iomem * __init mcfg_ioremap(struct acpi_mcfg_allocation *cfg) +{ + void __iomem *addr; + u32 size; + + size = (cfg->end_bus_number + 1) << 20; + addr = ioremap_nocache(cfg->address, size); + if (addr) { + printk(KERN_INFO "PCI: Using MMCONFIG at %Lx - %Lx\n", + cfg->address, cfg->address + size - 1); + } + return addr; +} + int __init pci_mmcfg_arch_init(void) { int i; -- cgit v1.2.3 From a4ec1b2c9fe9492c9ab30261b411d836527fe0b6 Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Tue, 13 Feb 2007 13:26:20 +0100 Subject: [PATCH] mmconfig: remove #define MMCONFIG_APER_XXX MMCONFIG_APER_XXX is unneeded in arch/x86_64/pci/mmconfig.c. Signed-off-by: OGAWA Hirofumi Signed-off-by: Andi Kleen --- arch/x86_64/pci/mmconfig.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/pci/mmconfig.c b/arch/x86_64/pci/mmconfig.c index 78e50b2c5cc5..50512a8fc9e8 100644 --- a/arch/x86_64/pci/mmconfig.c +++ b/arch/x86_64/pci/mmconfig.c @@ -13,10 +13,6 @@ #include "pci.h" -/* aperture is up to 256MB but BIOS may reserve less */ -#define MMCONFIG_APER_MIN (2 * 1024*1024) -#define MMCONFIG_APER_MAX (256 * 1024*1024) - /* Verify the first 16 busses. We assume that systems with more busses get MCFG right. */ #define PCI_MMCFG_MAX_CHECK_BUS 16 -- cgit v1.2.3 From 429d512e532ec9c969aa6f66ddbc542f3a5fe4da Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Tue, 13 Feb 2007 13:26:20 +0100 Subject: [PATCH] mmconfig: minor cleanup in mmconfig code This just cleans up. Signed-off-by: OGAWA Hirofumi Signed-off-by: Andi Kleen --- arch/i386/pci/mmconfig-shared.c | 52 +++++++++++++++++------------------------ arch/i386/pci/mmconfig.c | 13 ++++------- arch/i386/pci/pci.h | 4 +++- arch/x86_64/pci/mmconfig.c | 16 ++++--------- 4 files changed, 33 insertions(+), 52 deletions(-) (limited to 'arch') diff --git a/arch/i386/pci/mmconfig-shared.c b/arch/i386/pci/mmconfig-shared.c index 77de6de94f1f..4ea0852487a4 100644 --- a/arch/i386/pci/mmconfig-shared.c +++ b/arch/i386/pci/mmconfig-shared.c @@ -22,10 +22,6 @@ #define MMCONFIG_APER_MIN (2 * 1024*1024) #define MMCONFIG_APER_MAX (256 * 1024*1024) -/* Verify the first 16 busses. We assume that systems with more busses - get MCFG right. */ -#define PCI_MMCFG_MAX_CHECK_BUS 16 - DECLARE_BITMAP(pci_mmcfg_fallback_slots, 32*PCI_MMCFG_MAX_CHECK_BUS); /* K8 systems have some devices (typically in the builtin northbridge) @@ -34,29 +30,30 @@ DECLARE_BITMAP(pci_mmcfg_fallback_slots, 32*PCI_MMCFG_MAX_CHECK_BUS); and assigning suitable _SEGs, but this isn't implemented in some BIOS. Instead try to discover all devices on bus 0 that are unreachable using MM and fallback for them. */ -static __init void unreachable_devices(void) +static void __init unreachable_devices(void) { - int i, k; + int i, bus; /* Use the max bus number from ACPI here? */ - for (k = 0; k < PCI_MMCFG_MAX_CHECK_BUS; k++) { + for (bus = 0; bus < PCI_MMCFG_MAX_CHECK_BUS; bus++) { for (i = 0; i < 32; i++) { + unsigned int devfn = PCI_DEVFN(i, 0); u32 val1, val2; - pci_conf1_read(0, k, PCI_DEVFN(i,0), 0, 4, &val1); + pci_conf1_read(0, bus, devfn, 0, 4, &val1); if (val1 == 0xffffffff) continue; - raw_pci_ops->read(0, k, PCI_DEVFN(i, 0), 0, 4, &val2); + raw_pci_ops->read(0, bus, devfn, 0, 4, &val2); if (val1 != val2) { - set_bit(i + 32*k, pci_mmcfg_fallback_slots); + set_bit(i + 32 * bus, pci_mmcfg_fallback_slots); printk(KERN_NOTICE "PCI: No mmconfig possible" - " on device %02x:%02x\n", k, i); + " on device %02x:%02x\n", bus, i); } } } } -static __init const char *pci_mmcfg_e7520(void) +static const char __init *pci_mmcfg_e7520(void) { u32 win; pci_conf1_read(0, 0, PCI_DEVFN(0,0), 0xce, 2, &win); @@ -73,7 +70,7 @@ static __init const char *pci_mmcfg_e7520(void) return "Intel Corporation E7520 Memory Controller Hub"; } -static __init const char *pci_mmcfg_intel_945(void) +static const char __init *pci_mmcfg_intel_945(void) { u32 pciexbar, mask = 0, len = 0; @@ -128,7 +125,7 @@ struct pci_mmcfg_hostbridge_probe { const char *(*probe)(void); }; -static __initdata struct pci_mmcfg_hostbridge_probe pci_mmcfg_probes[] = { +static struct pci_mmcfg_hostbridge_probe pci_mmcfg_probes[] __initdata = { { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, pci_mmcfg_e7520 }, { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82945G_HB, pci_mmcfg_intel_945 }, }; @@ -148,25 +145,21 @@ static int __init pci_mmcfg_check_hostbridge(void) pci_mmcfg_config = NULL; name = NULL; - for (i = 0; !name && i < ARRAY_SIZE(pci_mmcfg_probes); i++) - if ((pci_mmcfg_probes[i].vendor == PCI_ANY_ID || - pci_mmcfg_probes[i].vendor == vendor) && - (pci_mmcfg_probes[i].device == PCI_ANY_ID || - pci_mmcfg_probes[i].device == device)) + for (i = 0; !name && i < ARRAY_SIZE(pci_mmcfg_probes); i++) { + if (pci_mmcfg_probes[i].vendor == vendor && + pci_mmcfg_probes[i].device == device) name = pci_mmcfg_probes[i].probe(); + } if (name) { - if (pci_mmcfg_config_num) - printk(KERN_INFO "PCI: Found %s with MMCONFIG support.\n", name); - else - printk(KERN_INFO "PCI: Found %s without MMCONFIG support.\n", - name); + printk(KERN_INFO "PCI: Found %s %s MMCONFIG support.\n", + name, pci_mmcfg_config_num ? "with" : "without"); } return name != NULL; } -static __init void pci_mmcfg_insert_resources(void) +static void __init pci_mmcfg_insert_resources(void) { #define PCI_MMCFG_RESOURCE_NAME_LEN 19 int i; @@ -176,7 +169,6 @@ static __init void pci_mmcfg_insert_resources(void) res = kcalloc(PCI_MMCFG_RESOURCE_NAME_LEN + sizeof(*res), pci_mmcfg_config_num, GFP_KERNEL); - if (!res) { printk(KERN_ERR "PCI: Unable to allocate MMCONFIG resources\n"); return; @@ -184,12 +176,12 @@ static __init void pci_mmcfg_insert_resources(void) names = (void *)&res[pci_mmcfg_config_num]; for (i = 0; i < pci_mmcfg_config_num; i++, res++) { - num_buses = pci_mmcfg_config[i].end_bus_number - - pci_mmcfg_config[i].start_bus_number + 1; + struct acpi_mcfg_allocation *cfg = &pci_mmcfg_config[i]; + num_buses = cfg->end_bus_number - cfg->start_bus_number + 1; res->name = names; snprintf(names, PCI_MMCFG_RESOURCE_NAME_LEN, "PCI MMCONFIG %u", - pci_mmcfg_config[i].pci_segment); - res->start = pci_mmcfg_config[i].address; + cfg->pci_segment); + res->start = cfg->address; res->end = res->start + (num_buses << 20) - 1; res->flags = IORESOURCE_MEM | IORESOURCE_BUSY; insert_resource(&iomem_resource, res); diff --git a/arch/i386/pci/mmconfig.c b/arch/i386/pci/mmconfig.c index 3325b79e651c..11be089efd7d 100644 --- a/arch/i386/pci/mmconfig.c +++ b/arch/i386/pci/mmconfig.c @@ -27,22 +27,17 @@ static int mmcfg_last_accessed_cpu; */ static u32 get_base_addr(unsigned int seg, int bus, unsigned devfn) { - int cfg_num = -1; struct acpi_mcfg_allocation *cfg; + int cfg_num; if (seg == 0 && bus < PCI_MMCFG_MAX_CHECK_BUS && test_bit(PCI_SLOT(devfn) + 32*bus, pci_mmcfg_fallback_slots)) return 0; - while (1) { - ++cfg_num; - if (cfg_num >= pci_mmcfg_config_num) { - break; - } + for (cfg_num = 0; cfg_num < pci_mmcfg_config_num; cfg_num++) { cfg = &pci_mmcfg_config[cfg_num]; - if (cfg->pci_segment != seg) - continue; - if ((cfg->start_bus_number <= bus) && + if (cfg->pci_segment == seg && + (cfg->start_bus_number <= bus) && (cfg->end_bus_number >= bus)) return cfg->address; } diff --git a/arch/i386/pci/pci.h b/arch/i386/pci/pci.h index 0270c80d99cc..2ce3d44b09d4 100644 --- a/arch/i386/pci/pci.h +++ b/arch/i386/pci/pci.h @@ -96,7 +96,9 @@ extern void pcibios_sort(void); /* pci-mmconfig.c */ +/* Verify the first 16 busses. We assume that systems with more busses + get MCFG right. */ #define PCI_MMCFG_MAX_CHECK_BUS 16 extern DECLARE_BITMAP(pci_mmcfg_fallback_slots, 32*PCI_MMCFG_MAX_CHECK_BUS); -extern int pci_mmcfg_arch_init(void); +extern int __init pci_mmcfg_arch_init(void); diff --git a/arch/x86_64/pci/mmconfig.c b/arch/x86_64/pci/mmconfig.c index 50512a8fc9e8..918fc5b95a06 100644 --- a/arch/x86_64/pci/mmconfig.c +++ b/arch/x86_64/pci/mmconfig.c @@ -13,10 +13,6 @@ #include "pci.h" -/* Verify the first 16 busses. We assume that systems with more busses - get MCFG right. */ -#define PCI_MMCFG_MAX_CHECK_BUS 16 - /* Static virtual mapping of the MMCONFIG aperture */ struct mmcfg_virt { struct acpi_mcfg_allocation *cfg; @@ -26,17 +22,13 @@ static struct mmcfg_virt *pci_mmcfg_virt; static char __iomem *get_virt(unsigned int seg, unsigned bus) { - int cfg_num = -1; struct acpi_mcfg_allocation *cfg; + int cfg_num; - while (1) { - ++cfg_num; - if (cfg_num >= pci_mmcfg_config_num) - break; + for (cfg_num = 0; cfg_num < pci_mmcfg_config_num; cfg_num++) { cfg = pci_mmcfg_virt[cfg_num].cfg; - if (cfg->pci_segment != seg) - continue; - if ((cfg->start_bus_number <= bus) && + if (cfg->pci_segment == seg && + (cfg->start_bus_number <= bus) && (cfg->end_bus_number >= bus)) return pci_mmcfg_virt[cfg_num].virt; } -- cgit v1.2.3 From 56829d1982b6f1150553c049d372728b9eda5aec Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Tue, 13 Feb 2007 13:26:20 +0100 Subject: [PATCH] mmconfig: fix unreachable_devices() Currently, unreachable_devices() compares value of mmconfig and value of conf1. But it doesn't check the device is reachable or not. Signed-off-by: OGAWA Hirofumi Signed-off-by: Andi Kleen --- arch/i386/pci/mmconfig-shared.c | 12 +++++++----- arch/i386/pci/mmconfig.c | 6 ++++++ arch/i386/pci/pci.h | 2 ++ arch/x86_64/pci/mmconfig.c | 6 ++++++ 4 files changed, 21 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/i386/pci/mmconfig-shared.c b/arch/i386/pci/mmconfig-shared.c index 4ea0852487a4..473db6257013 100644 --- a/arch/i386/pci/mmconfig-shared.c +++ b/arch/i386/pci/mmconfig-shared.c @@ -43,12 +43,14 @@ static void __init unreachable_devices(void) if (val1 == 0xffffffff) continue; - raw_pci_ops->read(0, bus, devfn, 0, 4, &val2); - if (val1 != val2) { - set_bit(i + 32 * bus, pci_mmcfg_fallback_slots); - printk(KERN_NOTICE "PCI: No mmconfig possible" - " on device %02x:%02x\n", bus, i); + if (pci_mmcfg_arch_reachable(0, bus, devfn)) { + raw_pci_ops->read(0, bus, devfn, 0, 4, &val2); + if (val1 == val2) + continue; } + set_bit(i + 32 * bus, pci_mmcfg_fallback_slots); + printk(KERN_NOTICE "PCI: No mmconfig possible on device" + " %02x:%02x\n", bus, i); } } } diff --git a/arch/i386/pci/mmconfig.c b/arch/i386/pci/mmconfig.c index 11be089efd7d..bb1afd9e589d 100644 --- a/arch/i386/pci/mmconfig.c +++ b/arch/i386/pci/mmconfig.c @@ -136,6 +136,12 @@ static struct pci_raw_ops pci_mmcfg = { .write = pci_mmcfg_write, }; +int __init pci_mmcfg_arch_reachable(unsigned int seg, unsigned int bus, + unsigned int devfn) +{ + return get_base_addr(seg, bus, devfn) != 0; +} + int __init pci_mmcfg_arch_init(void) { printk(KERN_INFO "PCI: Using MMCONFIG\n"); diff --git a/arch/i386/pci/pci.h b/arch/i386/pci/pci.h index 2ce3d44b09d4..e58bae2076ad 100644 --- a/arch/i386/pci/pci.h +++ b/arch/i386/pci/pci.h @@ -101,4 +101,6 @@ extern void pcibios_sort(void); #define PCI_MMCFG_MAX_CHECK_BUS 16 extern DECLARE_BITMAP(pci_mmcfg_fallback_slots, 32*PCI_MMCFG_MAX_CHECK_BUS); +extern int __init pci_mmcfg_arch_reachable(unsigned int seg, unsigned int bus, + unsigned int devfn); extern int __init pci_mmcfg_arch_init(void); diff --git a/arch/x86_64/pci/mmconfig.c b/arch/x86_64/pci/mmconfig.c index 918fc5b95a06..65d82736987e 100644 --- a/arch/x86_64/pci/mmconfig.c +++ b/arch/x86_64/pci/mmconfig.c @@ -126,6 +126,12 @@ static void __iomem * __init mcfg_ioremap(struct acpi_mcfg_allocation *cfg) return addr; } +int __init pci_mmcfg_arch_reachable(unsigned int seg, unsigned int bus, + unsigned int devfn) +{ + return pci_dev_base(seg, bus, devfn) != NULL; +} + int __init pci_mmcfg_arch_init(void) { int i; -- cgit v1.2.3 From 26054ed02bb20f5b2e02d92cb6f0be0e2b0196d5 Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Tue, 13 Feb 2007 13:26:20 +0100 Subject: [PATCH] mmconfig: Move e820 check into pci_mmcfg_reject_broken() This is just cleanup. It moves to e820 check into pci_mmcfg_reject_broken(). Signed-off-by: OGAWA Hirofumi Signed-off-by: Andi Kleen --- arch/i386/pci/mmconfig-shared.c | 51 +++++++++++++++++++++++++---------------- 1 file changed, 31 insertions(+), 20 deletions(-) (limited to 'arch') diff --git a/arch/i386/pci/mmconfig-shared.c b/arch/i386/pci/mmconfig-shared.c index 473db6257013..747d8c63b0c4 100644 --- a/arch/i386/pci/mmconfig-shared.c +++ b/arch/i386/pci/mmconfig-shared.c @@ -191,9 +191,16 @@ static void __init pci_mmcfg_insert_resources(void) } } -static void __init pci_mmcfg_reject_broken(void) +static void __init pci_mmcfg_reject_broken(int type) { - typeof(pci_mmcfg_config[0]) *cfg = &pci_mmcfg_config[0]; + typeof(pci_mmcfg_config[0]) *cfg; + + if ((pci_mmcfg_config_num == 0) || + (pci_mmcfg_config == NULL) || + (pci_mmcfg_config[0].address == 0)) + return; + + cfg = &pci_mmcfg_config[0]; /* * Handle more broken MCFG tables on Asus etc. @@ -202,13 +209,29 @@ static void __init pci_mmcfg_reject_broken(void) if (pci_mmcfg_config_num == 1 && cfg->pci_segment == 0 && (cfg->start_bus_number | cfg->end_bus_number) == 0) { - kfree(pci_mmcfg_config); - pci_mmcfg_config = NULL; - pci_mmcfg_config_num = 0; - printk(KERN_ERR "PCI: start and end of bus number is 0. " - "Rejected as broken MCFG."); + "Rejected as broken MCFG.\n"); + goto reject; + } + + /* + * Only do this check when type 1 works. If it doesn't work + * assume we run on a Mac and always use MCFG + */ + if (type == 1 && !e820_all_mapped(cfg->address, + cfg->address + MMCONFIG_APER_MIN, + E820_RESERVED)) { + printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %Lx is not" + " E820-reserved\n", cfg->address); + goto reject; } + return; + +reject: + printk(KERN_ERR "PCI: Not using MMCONFIG.\n"); + kfree(pci_mmcfg_config); + pci_mmcfg_config = NULL; + pci_mmcfg_config_num = 0; } void __init pci_mmcfg_init(int type) @@ -223,7 +246,7 @@ void __init pci_mmcfg_init(int type) if (!known_bridge) { acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg); - pci_mmcfg_reject_broken(); + pci_mmcfg_reject_broken(type); } if ((pci_mmcfg_config_num == 0) || @@ -231,18 +254,6 @@ void __init pci_mmcfg_init(int type) (pci_mmcfg_config[0].address == 0)) return; - /* Only do this check when type 1 works. If it doesn't work - assume we run on a Mac and always use MCFG */ - if (type == 1 && !known_bridge && - !e820_all_mapped(pci_mmcfg_config[0].address, - pci_mmcfg_config[0].address + MMCONFIG_APER_MIN, - E820_RESERVED)) { - printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %Lx is not E820-reserved\n", - pci_mmcfg_config[0].address); - printk(KERN_ERR "PCI: Not using MMCONFIG.\n"); - return; - } - if (pci_mmcfg_arch_init()) { if (type == 1) unreachable_devices(); -- cgit v1.2.3 From 5558870bfbcca10cfc7b13ab866687012ea3c9af Mon Sep 17 00:00:00 2001 From: Karsten Weiss Date: Tue, 13 Feb 2007 13:26:21 +0100 Subject: [PATCH] x86-64: improved iommu documentation - add SWIOTLB config help text - mention Documentation/x86_64/boot-options.txt in Documentation/kernel-parameters.txt - remove the duplication of the iommu kernel parameter documentation. - Better explanation of some of the iommu kernel parameter options. - "32MB< Signed-off-by: Andi Kleen Acked-by: Muli Ben-Yehuda Cc: Andi Kleen Signed-off-by: Andrew Morton --- arch/x86_64/Kconfig | 10 ++++++++-- arch/x86_64/kernel/pci-dma.c | 28 ++++------------------------ 2 files changed, 12 insertions(+), 26 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig index 02dd39457bcf..a55382a1bb46 100644 --- a/arch/x86_64/Kconfig +++ b/arch/x86_64/Kconfig @@ -458,8 +458,8 @@ config IOMMU on systems with more than 3GB. This is usually needed for USB, sound, many IDE/SATA chipsets and some other devices. Provides a driver for the AMD Athlon64/Opteron/Turion/Sempron GART - based IOMMU and a software bounce buffer based IOMMU used on Intel - systems and as fallback. + based hardware IOMMU and a software bounce buffer based IOMMU used + on Intel systems and as fallback. The code is only active when needed (enough memory and limited device) unless CONFIG_IOMMU_DEBUG or iommu=force is specified too. @@ -496,6 +496,12 @@ config CALGARY_IOMMU_ENABLED_BY_DEFAULT # need this always selected by IOMMU for the VIA workaround config SWIOTLB bool + help + Support for software bounce buffers used on x86-64 systems + which don't have a hardware IOMMU (e.g. the current generation + of Intel's x86-64 CPUs). Using this PCI devices which can only + access 32-bits of memory can be used on systems with more than + 3 GB of memory. If unsure, say Y. config X86_MCE bool "Machine check support" if EMBEDDED diff --git a/arch/x86_64/kernel/pci-dma.c b/arch/x86_64/kernel/pci-dma.c index 683b7a5c1ab3..651ccfb06697 100644 --- a/arch/x86_64/kernel/pci-dma.c +++ b/arch/x86_64/kernel/pci-dma.c @@ -223,30 +223,10 @@ int dma_set_mask(struct device *dev, u64 mask) } EXPORT_SYMBOL(dma_set_mask); -/* iommu=[size][,noagp][,off][,force][,noforce][,leak][,memaper[=order]][,merge] - [,forcesac][,fullflush][,nomerge][,biomerge] - size set size of iommu (in bytes) - noagp don't initialize the AGP driver and use full aperture. - off don't use the IOMMU - leak turn on simple iommu leak tracing (only when CONFIG_IOMMU_LEAK is on) - memaper[=order] allocate an own aperture over RAM with size 32MB^order. - noforce don't force IOMMU usage. Default. - force Force IOMMU. - merge Do lazy merging. This may improve performance on some block devices. - Implies force (experimental) - biomerge Do merging at the BIO layer. This is more efficient than merge, - but should be only done with very big IOMMUs. Implies merge,force. - nomerge Don't do SG merging. - forcesac For SAC mode for masks <40bits (experimental) - fullflush Flush IOMMU on each allocation (default) - nofullflush Don't use IOMMU fullflush - allowed overwrite iommu off workarounds for specific chipsets. - soft Use software bounce buffering (default for Intel machines) - noaperture Don't touch the aperture for AGP. - allowdac Allow DMA >4GB - nodac Forbid DMA >4GB - panic Force panic when IOMMU overflows -*/ +/* + * See for the iommu kernel parameter + * documentation. + */ __init int iommu_setup(char *p) { iommu_merge = 1; -- cgit v1.2.3 From 006e84ee3a54e393ec6bef2a9bc891dc5bde2843 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Tue, 13 Feb 2007 13:26:21 +0100 Subject: [PATCH] x86-64: do not always end the stack trace with ULONG_MAX It makes more sense to end the stack trace with ULONG_MAX only if nr_entries < max_entries. Otherwise, we lose one entry in the long stack traces and cannot know whether the trace was complete or not. Signed-off-by: Catalin Marinas Signed-off-by: Andi Kleen Cc: Andi Kleen Cc: Jan Beulich Signed-off-by: Andrew Morton --- arch/x86_64/kernel/stacktrace.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/stacktrace.c b/arch/x86_64/kernel/stacktrace.c index 6026b31d037e..65ac2c6b34a6 100644 --- a/arch/x86_64/kernel/stacktrace.c +++ b/arch/x86_64/kernel/stacktrace.c @@ -32,7 +32,7 @@ static void save_stack_address(void *data, unsigned long addr) trace->skip--; return; } - if (trace->nr_entries < trace->max_entries - 1) + if (trace->nr_entries < trace->max_entries) trace->entries[trace->nr_entries++] = addr; } @@ -49,7 +49,8 @@ static struct stacktrace_ops save_stack_ops = { void save_stack_trace(struct stack_trace *trace, struct task_struct *task) { dump_trace(task, NULL, NULL, &save_stack_ops, trace); - trace->entries[trace->nr_entries++] = ULONG_MAX; + if (trace->nr_entries < trace->max_entries) + trace->entries[trace->nr_entries++] = ULONG_MAX; } EXPORT_SYMBOL(save_stack_trace); -- cgit v1.2.3 From 90611fe923aa3ac7ffb9e5df45c83860b0f00227 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 13 Feb 2007 13:26:21 +0100 Subject: [PATCH] i386: arch/i386/kernel/e820.c should #include Signed-off-by: Andrew Morton Signed-off-by: Andi Kleen --- arch/i386/kernel/e820.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/i386/kernel/e820.c b/arch/i386/kernel/e820.c index f391abcf7da9..9ded1e49119e 100644 --- a/arch/i386/kernel/e820.c +++ b/arch/i386/kernel/e820.c @@ -14,6 +14,7 @@ #include #include #include +#include #ifdef CONFIG_EFI int efi_enabled = 0; -- cgit v1.2.3 From c119ecce894120790903ef535dac3e105f3d6cde Mon Sep 17 00:00:00 2001 From: Zachary Amsden Date: Tue, 13 Feb 2007 13:26:21 +0100 Subject: [PATCH] MM: page allocation hooks for VMI backend The VMI backend uses explicit page type notification to track shadow page tables. The allocation of page table roots is especially tricky. We need to clone the root for non-PAE mode while it is protected under the pgd lock to correctly copy the shadow. We don't need to allocate pgds in PAE mode, (PDPs in Intel terminology) as they only have 4 entries, and are cached entirely by the processor, which makes shadowing them rather simple. For base page table level allocation, pmd_populate provides the exact hook point we need. Also, we need to allocate pages when splitting a large page, and we must release pages before returning the page to any free pool. Despite being required with these slightly odd semantics for VMI, Xen also uses these hooks to determine the exact moment when page tables are created or released. AK: All nops for other architectures Signed-off-by: Zachary Amsden Signed-off-by: Andi Kleen Cc: Andi Kleen Cc: Jeremy Fitzhardinge Cc: Rusty Russell Cc: Chris Wright Signed-off-by: Andrew Morton --- arch/i386/kernel/paravirt.c | 6 ++++++ arch/i386/mm/init.c | 4 ++++ arch/i386/mm/pageattr.c | 2 ++ arch/i386/mm/pgtable.c | 24 ++++++++++++++++++++---- 4 files changed, 32 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/paravirt.c b/arch/i386/kernel/paravirt.c index e55fd05da0f5..7329ec9fcc99 100644 --- a/arch/i386/kernel/paravirt.c +++ b/arch/i386/kernel/paravirt.c @@ -550,6 +550,12 @@ struct paravirt_ops paravirt_ops = { .flush_tlb_kernel = native_flush_tlb_global, .flush_tlb_single = native_flush_tlb_single, + .alloc_pt = (void *)native_nop, + .alloc_pd = (void *)native_nop, + .alloc_pd_clone = (void *)native_nop, + .release_pt = (void *)native_nop, + .release_pd = (void *)native_nop, + .set_pte = native_set_pte, .set_pte_at = native_set_pte_at, .set_pmd = native_set_pmd, diff --git a/arch/i386/mm/init.c b/arch/i386/mm/init.c index c5c5ea700cc7..ae436882af7a 100644 --- a/arch/i386/mm/init.c +++ b/arch/i386/mm/init.c @@ -62,6 +62,7 @@ static pmd_t * __init one_md_table_init(pgd_t *pgd) #ifdef CONFIG_X86_PAE pmd_table = (pmd_t *) alloc_bootmem_low_pages(PAGE_SIZE); + paravirt_alloc_pd(__pa(pmd_table) >> PAGE_SHIFT); set_pgd(pgd, __pgd(__pa(pmd_table) | _PAGE_PRESENT)); pud = pud_offset(pgd, 0); if (pmd_table != pmd_offset(pud, 0)) @@ -82,6 +83,7 @@ static pte_t * __init one_page_table_init(pmd_t *pmd) { if (pmd_none(*pmd)) { pte_t *page_table = (pte_t *) alloc_bootmem_low_pages(PAGE_SIZE); + paravirt_alloc_pt(__pa(page_table) >> PAGE_SHIFT); set_pmd(pmd, __pmd(__pa(page_table) | _PAGE_TABLE)); if (page_table != pte_offset_kernel(pmd, 0)) BUG(); @@ -345,6 +347,8 @@ static void __init pagetable_init (void) /* Init entries of the first-level page table to the zero page */ for (i = 0; i < PTRS_PER_PGD; i++) set_pgd(pgd_base + i, __pgd(__pa(empty_zero_page) | _PAGE_PRESENT)); +#else + paravirt_alloc_pd(__pa(swapper_pg_dir) >> PAGE_SHIFT); #endif /* Enable PSE if available */ diff --git a/arch/i386/mm/pageattr.c b/arch/i386/mm/pageattr.c index e223b1d4981c..412ebbd8adb0 100644 --- a/arch/i386/mm/pageattr.c +++ b/arch/i386/mm/pageattr.c @@ -60,6 +60,7 @@ static struct page *split_large_page(unsigned long address, pgprot_t prot, address = __pa(address); addr = address & LARGE_PAGE_MASK; pbase = (pte_t *)page_address(base); + paravirt_alloc_pt(page_to_pfn(base)); for (i = 0; i < PTRS_PER_PTE; i++, addr += PAGE_SIZE) { set_pte(&pbase[i], pfn_pte(addr >> PAGE_SHIFT, addr == address ? prot : ref_prot)); @@ -172,6 +173,7 @@ __change_page_attr(struct page *page, pgprot_t prot) if (!PageReserved(kpte_page)) { if (cpu_has_pse && (page_private(kpte_page) == 0)) { ClearPagePrivate(kpte_page); + paravirt_release_pt(page_to_pfn(kpte_page)); list_add(&kpte_page->lru, &df_list); revert_page(kpte_page, address); } diff --git a/arch/i386/mm/pgtable.c b/arch/i386/mm/pgtable.c index f349eaf450b0..b5f538f52272 100644 --- a/arch/i386/mm/pgtable.c +++ b/arch/i386/mm/pgtable.c @@ -248,9 +248,15 @@ void pgd_ctor(void *pgd, struct kmem_cache *cache, unsigned long unused) clone_pgd_range((pgd_t *)pgd + USER_PTRS_PER_PGD, swapper_pg_dir + USER_PTRS_PER_PGD, KERNEL_PGD_PTRS); + if (PTRS_PER_PMD > 1) return; + /* must happen under lock */ + paravirt_alloc_pd_clone(__pa(pgd) >> PAGE_SHIFT, + __pa(swapper_pg_dir) >> PAGE_SHIFT, + USER_PTRS_PER_PGD, PTRS_PER_PGD - USER_PTRS_PER_PGD); + pgd_list_add(pgd); spin_unlock_irqrestore(&pgd_lock, flags); } @@ -260,6 +266,7 @@ void pgd_dtor(void *pgd, struct kmem_cache *cache, unsigned long unused) { unsigned long flags; /* can be called from interrupt context */ + paravirt_release_pd(__pa(pgd) >> PAGE_SHIFT); spin_lock_irqsave(&pgd_lock, flags); pgd_list_del(pgd); spin_unlock_irqrestore(&pgd_lock, flags); @@ -277,13 +284,18 @@ pgd_t *pgd_alloc(struct mm_struct *mm) pmd_t *pmd = kmem_cache_alloc(pmd_cache, GFP_KERNEL); if (!pmd) goto out_oom; + paravirt_alloc_pd(__pa(pmd) >> PAGE_SHIFT); set_pgd(&pgd[i], __pgd(1 + __pa(pmd))); } return pgd; out_oom: - for (i--; i >= 0; i--) - kmem_cache_free(pmd_cache, (void *)__va(pgd_val(pgd[i])-1)); + for (i--; i >= 0; i--) { + pgd_t pgdent = pgd[i]; + void* pmd = (void *)__va(pgd_val(pgdent)-1); + paravirt_release_pd(__pa(pmd) >> PAGE_SHIFT); + kmem_cache_free(pmd_cache, pmd); + } kmem_cache_free(pgd_cache, pgd); return NULL; } @@ -294,8 +306,12 @@ void pgd_free(pgd_t *pgd) /* in the PAE case user pgd entries are overwritten before usage */ if (PTRS_PER_PMD > 1) - for (i = 0; i < USER_PTRS_PER_PGD; ++i) - kmem_cache_free(pmd_cache, (void *)__va(pgd_val(pgd[i])-1)); + for (i = 0; i < USER_PTRS_PER_PGD; ++i) { + pgd_t pgdent = pgd[i]; + void* pmd = (void *)__va(pgd_val(pgdent)-1); + paravirt_release_pd(__pa(pmd) >> PAGE_SHIFT); + kmem_cache_free(pmd_cache, pmd); + } /* in the non-PAE case, free_pgtables() clears user pgd entries */ kmem_cache_free(pgd_cache, pgd); } -- cgit v1.2.3 From 9226d125d94c7e4964dd41cc5e9ca2ff84091d01 Mon Sep 17 00:00:00 2001 From: Zachary Amsden Date: Tue, 13 Feb 2007 13:26:21 +0100 Subject: [PATCH] i386: paravirt CPU hypercall batching mode The VMI ROM has a mode where hypercalls can be queued and batched. This turns out to be a significant win during context switch, but must be done at a specific point before side effects to CPU state are visible to subsequent instructions. This is similar to the MMU batching hooks already provided. The same hooks could be used by the Xen backend to implement a context switch multicall. To explain a bit more about lazy modes in the paravirt patches, basically, the idea is that only one of lazy CPU or MMU mode can be active at any given time. Lazy MMU mode is similar to this lazy CPU mode, and allows for batching of multiple PTE updates (say, inside a remap loop), but to avoid keeping some kind of state machine about when to flush cpu or mmu updates, we just allow one or the other to be active. Although there is no real reason a more comprehensive scheme could not be implemented, there is also no demonstrated need for this extra complexity. Signed-off-by: Zachary Amsden Signed-off-by: Andi Kleen Cc: Andi Kleen Cc: Jeremy Fitzhardinge Cc: Rusty Russell Cc: Chris Wright Signed-off-by: Andrew Morton --- arch/i386/kernel/paravirt.c | 1 + arch/i386/kernel/process.c | 25 +++++++++++++++++-------- 2 files changed, 18 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/paravirt.c b/arch/i386/kernel/paravirt.c index 7329ec9fcc99..4dfdac4550dd 100644 --- a/arch/i386/kernel/paravirt.c +++ b/arch/i386/kernel/paravirt.c @@ -545,6 +545,7 @@ struct paravirt_ops paravirt_ops = { .apic_write_atomic = native_apic_write_atomic, .apic_read = native_apic_read, #endif + .set_lazy_mode = (void *)native_nop, .flush_tlb_user = native_flush_tlb, .flush_tlb_kernel = native_flush_tlb_global, diff --git a/arch/i386/kernel/process.c b/arch/i386/kernel/process.c index 23ae198dbbc3..cfae587bf7d2 100644 --- a/arch/i386/kernel/process.c +++ b/arch/i386/kernel/process.c @@ -669,14 +669,6 @@ struct task_struct fastcall * __switch_to(struct task_struct *prev_p, struct tas */ load_TLS(next, cpu); - /* - * Restore %gs if needed (which is common) - */ - if (prev->gs | next->gs) - loadsegment(gs, next->gs); - - write_pda(pcurrent, next_p); - /* * Now maybe handle debug registers and/or IO bitmaps */ @@ -686,6 +678,15 @@ struct task_struct fastcall * __switch_to(struct task_struct *prev_p, struct tas disable_tsc(prev_p, next_p); + /* + * Leave lazy mode, flushing any hypercalls made here. + * This must be done before restoring TLS segments so + * the GDT and LDT are properly updated, and must be + * done before math_state_restore, so the TS bit is up + * to date. + */ + arch_leave_lazy_cpu_mode(); + /* If the task has used fpu the last 5 timeslices, just do a full * restore of the math state immediately to avoid the trap; the * chances of needing FPU soon are obviously high now @@ -693,6 +694,14 @@ struct task_struct fastcall * __switch_to(struct task_struct *prev_p, struct tas if (next_p->fpu_counter > 5) math_state_restore(); + /* + * Restore %gs if needed (which is common) + */ + if (prev->gs | next->gs) + loadsegment(gs, next->gs); + + write_pda(pcurrent, next_p); + return prev_p; } -- cgit v1.2.3 From 8b15114434998a78aa50f8559d69c7a400cff267 Mon Sep 17 00:00:00 2001 From: Zachary Amsden Date: Tue, 13 Feb 2007 13:26:21 +0100 Subject: [PATCH] i386: iOPL handling for paravirt guests I found a clever way to make the extra IOPL switching invisible to non-paravirt compiles - since kernel_rpl is statically defined to be zero there, and only non-zero rpl kernel have a problem restoring IOPL, as popf does not restore IOPL flags unless run at CPL-0. Signed-off-by: Zachary Amsden Signed-off-by: Andi Kleen Cc: Andi Kleen Cc: Jeremy Fitzhardinge Cc: Rusty Russell Cc: Chris Wright Signed-off-by: Andrew Morton --- arch/i386/kernel/process.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch') diff --git a/arch/i386/kernel/process.c b/arch/i386/kernel/process.c index cfae587bf7d2..05be77413351 100644 --- a/arch/i386/kernel/process.c +++ b/arch/i386/kernel/process.c @@ -669,6 +669,15 @@ struct task_struct fastcall * __switch_to(struct task_struct *prev_p, struct tas */ load_TLS(next, cpu); + /* + * Restore IOPL if needed. In normal use, the flags restore + * in the switch assembly will handle this. But if the kernel + * is running virtualized at a non-zero CPL, the popf will + * not restore flags, so it must be done in a separate step. + */ + if (get_kernel_rpl() && unlikely(prev->iopl != next->iopl)) + set_iopl_mask(next->iopl); + /* * Now maybe handle debug registers and/or IO bitmaps */ -- cgit v1.2.3 From ae5da273fe3352febd38658d8d34484cbcfb3423 Mon Sep 17 00:00:00 2001 From: Zachary Amsden Date: Tue, 13 Feb 2007 13:26:21 +0100 Subject: [PATCH] i386: SMP boot hook for paravirt Add VMI SMP boot hook. We emulate a regular boot sequence and use the same APIC IPI initiation, we just poke magic values to load into the CPU state when the startup IPI is received, rather than having to jump through a real mode trampoline. This is all that was needed to get SMP to work. Signed-off-by: Zachary Amsden Signed-off-by: Andi Kleen Cc: Andi Kleen Cc: Jeremy Fitzhardinge Cc: Rusty Russell Cc: Chris Wright Signed-off-by: Andrew Morton --- arch/i386/kernel/paravirt.c | 2 ++ arch/i386/kernel/smpboot.c | 7 +++++++ 2 files changed, 9 insertions(+) (limited to 'arch') diff --git a/arch/i386/kernel/paravirt.c b/arch/i386/kernel/paravirt.c index 4dfdac4550dd..5bf81059a7e6 100644 --- a/arch/i386/kernel/paravirt.c +++ b/arch/i386/kernel/paravirt.c @@ -572,6 +572,8 @@ struct paravirt_ops paravirt_ops = { .irq_enable_sysexit = native_irq_enable_sysexit, .iret = native_iret, + + .startup_ipi_hook = (void *)native_nop, }; /* diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c index 8c6c8c52b95c..1908afa265b9 100644 --- a/arch/i386/kernel/smpboot.c +++ b/arch/i386/kernel/smpboot.c @@ -834,6 +834,13 @@ wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip) else num_starts = 0; + /* + * Paravirt / VMI wants a startup IPI hook here to set up the + * target processor state. + */ + startup_ipi_hook(phys_apicid, (unsigned long) start_secondary, + (unsigned long) stack_start.esp); + /* * Run STARTUP IPI loop. */ -- cgit v1.2.3 From 7ce0bcfd1667736f1293cff845139bbee53186de Mon Sep 17 00:00:00 2001 From: Zachary Amsden Date: Tue, 13 Feb 2007 13:26:21 +0100 Subject: [PATCH] i386: vMI backend for paravirt-ops Fairly straightforward implementation of VMI backend for paravirt-ops. [Adrian Bunk: some cleanups] Signed-off-by: Zachary Amsden Signed-off-by: Andi Kleen Cc: Andi Kleen Cc: Jeremy Fitzhardinge Cc: Rusty Russell Cc: Chris Wright Signed-off-by: Andrew Morton --- arch/i386/Kconfig | 9 + arch/i386/kernel/Makefile | 2 + arch/i386/kernel/head.S | 2 +- arch/i386/kernel/io_apic.c | 2 +- arch/i386/kernel/setup.c | 9 + arch/i386/kernel/smpboot.c | 4 + arch/i386/kernel/vmi.c | 904 +++++++++++++++++++++++++++++++++++++++++++++ arch/i386/mm/pgtable.c | 2 + 8 files changed, 932 insertions(+), 2 deletions(-) create mode 100644 arch/i386/kernel/vmi.c (limited to 'arch') diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig index 63d5e841caf5..a3b3f6ee3642 100644 --- a/arch/i386/Kconfig +++ b/arch/i386/Kconfig @@ -203,6 +203,15 @@ config PARAVIRT However, when run without a hypervisor the kernel is theoretically slower. If in doubt, say N. +config VMI + bool "VMI Paravirt-ops support" + depends on PARAVIRT + default y + help + VMI provides a paravirtualized interface to multiple hypervisors + include VMware ESX server and Xen by connecting to a ROM module + provided by the hypervisor. + config ACPI_SRAT bool default y diff --git a/arch/i386/kernel/Makefile b/arch/i386/kernel/Makefile index 1e8988e558c5..9cfb58911f14 100644 --- a/arch/i386/kernel/Makefile +++ b/arch/i386/kernel/Makefile @@ -40,6 +40,8 @@ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_HPET_TIMER) += hpet.o obj-$(CONFIG_K8_NB) += k8.o +obj-$(CONFIG_VMI) += vmi.o + # Make sure this is linked after any other paravirt_ops structs: see head.S obj-$(CONFIG_PARAVIRT) += paravirt.o diff --git a/arch/i386/kernel/head.S b/arch/i386/kernel/head.S index 15336c8b5960..6c7f71176977 100644 --- a/arch/i386/kernel/head.S +++ b/arch/i386/kernel/head.S @@ -360,7 +360,7 @@ check_x87: * cpu_gdt_table and boot_pda; for secondary CPUs, these will be * that CPU's GDT and PDA. */ -setup_pda: +ENTRY(setup_pda) /* get the PDA pointer */ movl start_pda, %eax diff --git a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c index 1711f4e1093f..e30ccedad0b9 100644 --- a/arch/i386/kernel/io_apic.c +++ b/arch/i386/kernel/io_apic.c @@ -1920,7 +1920,7 @@ static void __init setup_ioapic_ids_from_mpc(void) static void __init setup_ioapic_ids_from_mpc(void) { } #endif -static int no_timer_check __initdata; +int no_timer_check __initdata; static int __init notimercheck(char *s) { diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c index 4694ac980cd2..bd8c218d94af 100644 --- a/arch/i386/kernel/setup.c +++ b/arch/i386/kernel/setup.c @@ -60,6 +60,7 @@ #include #include #include +#include #include #include @@ -581,6 +582,14 @@ void __init setup_arch(char **cmdline_p) max_low_pfn = setup_memory(); +#ifdef CONFIG_VMI + /* + * Must be after max_low_pfn is determined, and before kernel + * pagetables are setup. + */ + vmi_init(); +#endif + /* * NOTE: before this point _nobody_ is allowed to allocate * any memory using the bootmem allocator. Although the diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c index 1908afa265b9..42502d820e4f 100644 --- a/arch/i386/kernel/smpboot.c +++ b/arch/i386/kernel/smpboot.c @@ -63,6 +63,7 @@ #include #include #include +#include /* Set if we find a B stepping CPU */ static int __devinitdata smp_b_stepping; @@ -545,6 +546,9 @@ static void __cpuinit start_secondary(void *unused) * booting is too fragile that we want to limit the * things done here to the most necessary things. */ +#ifdef CONFIG_VMI + vmi_bringup(); +#endif secondary_cpu_init(); preempt_disable(); smp_callin(); diff --git a/arch/i386/kernel/vmi.c b/arch/i386/kernel/vmi.c new file mode 100644 index 000000000000..a94d64b10f75 --- /dev/null +++ b/arch/i386/kernel/vmi.c @@ -0,0 +1,904 @@ +/* + * VMI specific paravirt-ops implementation + * + * Copyright (C) 2005, VMware, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Send feedback to zach@vmware.com + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Convenient for calling VMI functions indirectly in the ROM */ +typedef u32 __attribute__((regparm(1))) (VROMFUNC)(void); +typedef u64 __attribute__((regparm(2))) (VROMLONGFUNC)(int); + +#define call_vrom_func(rom,func) \ + (((VROMFUNC *)(rom->func))()) + +#define call_vrom_long_func(rom,func,arg) \ + (((VROMLONGFUNC *)(rom->func)) (arg)) + +static struct vrom_header *vmi_rom; +static int license_gplok; +static int disable_nodelay; +static int disable_pge; +static int disable_pse; +static int disable_sep; +static int disable_tsc; +static int disable_mtrr; + +/* Cached VMI operations */ +struct { + void (*cpuid)(void /* non-c */); + void (*_set_ldt)(u32 selector); + void (*set_tr)(u32 selector); + void (*set_kernel_stack)(u32 selector, u32 esp0); + void (*allocate_page)(u32, u32, u32, u32, u32); + void (*release_page)(u32, u32); + void (*set_pte)(pte_t, pte_t *, unsigned); + void (*update_pte)(pte_t *, unsigned); + void (*set_linear_mapping)(int, u32, u32, u32); + void (*flush_tlb)(int); + void (*set_initial_ap_state)(int, int); +} vmi_ops; + +/* XXX move this to alternative.h */ +extern struct paravirt_patch __start_parainstructions[], + __stop_parainstructions[]; + +/* + * VMI patching routines. + */ +#define MNEM_CALL 0xe8 +#define MNEM_JMP 0xe9 +#define MNEM_RET 0xc3 + +static char irq_save_disable_callout[] = { + MNEM_CALL, 0, 0, 0, 0, + MNEM_CALL, 0, 0, 0, 0, + MNEM_RET +}; +#define IRQ_PATCH_INT_MASK 0 +#define IRQ_PATCH_DISABLE 5 + +static inline void patch_offset(unsigned char *eip, unsigned char *dest) +{ + *(unsigned long *)(eip+1) = dest-eip-5; +} + +static unsigned patch_internal(int call, unsigned len, void *insns) +{ + u64 reloc; + struct vmi_relocation_info *const rel = (struct vmi_relocation_info *)&reloc; + reloc = call_vrom_long_func(vmi_rom, get_reloc, call); + switch(rel->type) { + case VMI_RELOCATION_CALL_REL: + BUG_ON(len < 5); + *(char *)insns = MNEM_CALL; + patch_offset(insns, rel->eip); + return 5; + + case VMI_RELOCATION_JUMP_REL: + BUG_ON(len < 5); + *(char *)insns = MNEM_JMP; + patch_offset(insns, rel->eip); + return 5; + + case VMI_RELOCATION_NOP: + /* obliterate the whole thing */ + return 0; + + case VMI_RELOCATION_NONE: + /* leave native code in place */ + break; + + default: + BUG(); + } + return len; +} + +/* + * Apply patch if appropriate, return length of new instruction + * sequence. The callee does nop padding for us. + */ +static unsigned vmi_patch(u8 type, u16 clobbers, void *insns, unsigned len) +{ + switch (type) { + case PARAVIRT_IRQ_DISABLE: + return patch_internal(VMI_CALL_DisableInterrupts, len, insns); + case PARAVIRT_IRQ_ENABLE: + return patch_internal(VMI_CALL_EnableInterrupts, len, insns); + case PARAVIRT_RESTORE_FLAGS: + return patch_internal(VMI_CALL_SetInterruptMask, len, insns); + case PARAVIRT_SAVE_FLAGS: + return patch_internal(VMI_CALL_GetInterruptMask, len, insns); + case PARAVIRT_SAVE_FLAGS_IRQ_DISABLE: + if (len >= 10) { + patch_internal(VMI_CALL_GetInterruptMask, len, insns); + patch_internal(VMI_CALL_DisableInterrupts, len-5, insns+5); + return 10; + } else { + /* + * You bastards didn't leave enough room to + * patch save_flags_irq_disable inline. Patch + * to a helper + */ + BUG_ON(len < 5); + *(char *)insns = MNEM_CALL; + patch_offset(insns, irq_save_disable_callout); + return 5; + } + case PARAVIRT_INTERRUPT_RETURN: + return patch_internal(VMI_CALL_IRET, len, insns); + case PARAVIRT_STI_SYSEXIT: + return patch_internal(VMI_CALL_SYSEXIT, len, insns); + default: + break; + } + return len; +} + +/* CPUID has non-C semantics, and paravirt-ops API doesn't match hardware ISA */ +static void vmi_cpuid(unsigned int *eax, unsigned int *ebx, + unsigned int *ecx, unsigned int *edx) +{ + int override = 0; + if (*eax == 1) + override = 1; + asm volatile ("call *%6" + : "=a" (*eax), + "=b" (*ebx), + "=c" (*ecx), + "=d" (*edx) + : "0" (*eax), "2" (*ecx), "r" (vmi_ops.cpuid)); + if (override) { + if (disable_pse) + *edx &= ~X86_FEATURE_PSE; + if (disable_pge) + *edx &= ~X86_FEATURE_PGE; + if (disable_sep) + *edx &= ~X86_FEATURE_SEP; + if (disable_tsc) + *edx &= ~X86_FEATURE_TSC; + if (disable_mtrr) + *edx &= ~X86_FEATURE_MTRR; + } +} + +static inline void vmi_maybe_load_tls(struct desc_struct *gdt, int nr, struct desc_struct *new) +{ + if (gdt[nr].a != new->a || gdt[nr].b != new->b) + write_gdt_entry(gdt, nr, new->a, new->b); +} + +static void vmi_load_tls(struct thread_struct *t, unsigned int cpu) +{ + struct desc_struct *gdt = get_cpu_gdt_table(cpu); + vmi_maybe_load_tls(gdt, GDT_ENTRY_TLS_MIN + 0, &t->tls_array[0]); + vmi_maybe_load_tls(gdt, GDT_ENTRY_TLS_MIN + 1, &t->tls_array[1]); + vmi_maybe_load_tls(gdt, GDT_ENTRY_TLS_MIN + 2, &t->tls_array[2]); +} + +static void vmi_set_ldt(const void *addr, unsigned entries) +{ + unsigned cpu = smp_processor_id(); + u32 low, high; + + pack_descriptor(&low, &high, (unsigned long)addr, + entries * sizeof(struct desc_struct) - 1, + DESCTYPE_LDT, 0); + write_gdt_entry(get_cpu_gdt_table(cpu), GDT_ENTRY_LDT, low, high); + vmi_ops._set_ldt(entries ? GDT_ENTRY_LDT*sizeof(struct desc_struct) : 0); +} + +static void vmi_set_tr(void) +{ + vmi_ops.set_tr(GDT_ENTRY_TSS*sizeof(struct desc_struct)); +} + +static void vmi_load_esp0(struct tss_struct *tss, + struct thread_struct *thread) +{ + tss->esp0 = thread->esp0; + + /* This can only happen when SEP is enabled, no need to test "SEP"arately */ + if (unlikely(tss->ss1 != thread->sysenter_cs)) { + tss->ss1 = thread->sysenter_cs; + wrmsr(MSR_IA32_SYSENTER_CS, thread->sysenter_cs, 0); + } + vmi_ops.set_kernel_stack(__KERNEL_DS, tss->esp0); +} + +static void vmi_flush_tlb_user(void) +{ + vmi_ops.flush_tlb(VMI_FLUSH_TLB); +} + +static void vmi_flush_tlb_kernel(void) +{ + vmi_ops.flush_tlb(VMI_FLUSH_TLB | VMI_FLUSH_GLOBAL); +} + +/* Stub to do nothing at all; used for delays and unimplemented calls */ +static void vmi_nop(void) +{ +} + + +#ifdef CONFIG_DEBUG_PAGE_TYPE + +#ifdef CONFIG_X86_PAE +#define MAX_BOOT_PTS (2048+4+1) +#else +#define MAX_BOOT_PTS (1024+1) +#endif + +/* + * During boot, mem_map is not yet available in paging_init, so stash + * all the boot page allocations here. + */ +static struct { + u32 pfn; + int type; +} boot_page_allocations[MAX_BOOT_PTS]; +static int num_boot_page_allocations; +static int boot_allocations_applied; + +void vmi_apply_boot_page_allocations(void) +{ + int i; + BUG_ON(!mem_map); + for (i = 0; i < num_boot_page_allocations; i++) { + struct page *page = pfn_to_page(boot_page_allocations[i].pfn); + page->type = boot_page_allocations[i].type; + page->type = boot_page_allocations[i].type & + ~(VMI_PAGE_ZEROED | VMI_PAGE_CLONE); + } + boot_allocations_applied = 1; +} + +static void record_page_type(u32 pfn, int type) +{ + BUG_ON(num_boot_page_allocations >= MAX_BOOT_PTS); + boot_page_allocations[num_boot_page_allocations].pfn = pfn; + boot_page_allocations[num_boot_page_allocations].type = type; + num_boot_page_allocations++; +} + +static void check_zeroed_page(u32 pfn, int type, struct page *page) +{ + u32 *ptr; + int i; + int limit = PAGE_SIZE / sizeof(int); + + if (page_address(page)) + ptr = (u32 *)page_address(page); + else + ptr = (u32 *)__va(pfn << PAGE_SHIFT); + /* + * When cloning the root in non-PAE mode, only the userspace + * pdes need to be zeroed. + */ + if (type & VMI_PAGE_CLONE) + limit = USER_PTRS_PER_PGD; + for (i = 0; i < limit; i++) + BUG_ON(ptr[i]); +} + +/* + * We stash the page type into struct page so we can verify the page + * types are used properly. + */ +static void vmi_set_page_type(u32 pfn, int type) +{ + /* PAE can have multiple roots per page - don't track */ + if (PTRS_PER_PMD > 1 && (type & VMI_PAGE_PDP)) + return; + + if (boot_allocations_applied) { + struct page *page = pfn_to_page(pfn); + if (type != VMI_PAGE_NORMAL) + BUG_ON(page->type); + else + BUG_ON(page->type == VMI_PAGE_NORMAL); + page->type = type & ~(VMI_PAGE_ZEROED | VMI_PAGE_CLONE); + if (type & VMI_PAGE_ZEROED) + check_zeroed_page(pfn, type, page); + } else { + record_page_type(pfn, type); + } +} + +static void vmi_check_page_type(u32 pfn, int type) +{ + /* PAE can have multiple roots per page - skip checks */ + if (PTRS_PER_PMD > 1 && (type & VMI_PAGE_PDP)) + return; + + type &= ~(VMI_PAGE_ZEROED | VMI_PAGE_CLONE); + if (boot_allocations_applied) { + struct page *page = pfn_to_page(pfn); + BUG_ON((page->type ^ type) & VMI_PAGE_PAE); + BUG_ON(type == VMI_PAGE_NORMAL && page->type); + BUG_ON((type & page->type) == 0); + } +} +#else +#define vmi_set_page_type(p,t) do { } while (0) +#define vmi_check_page_type(p,t) do { } while (0) +#endif + +static void vmi_allocate_pt(u32 pfn) +{ + vmi_set_page_type(pfn, VMI_PAGE_L1); + vmi_ops.allocate_page(pfn, VMI_PAGE_L1, 0, 0, 0); +} + +static void vmi_allocate_pd(u32 pfn) +{ + /* + * This call comes in very early, before mem_map is setup. + * It is called only for swapper_pg_dir, which already has + * data on it. + */ + vmi_set_page_type(pfn, VMI_PAGE_L2); + vmi_ops.allocate_page(pfn, VMI_PAGE_L2, 0, 0, 0); +} + +static void vmi_allocate_pd_clone(u32 pfn, u32 clonepfn, u32 start, u32 count) +{ + vmi_set_page_type(pfn, VMI_PAGE_L2 | VMI_PAGE_CLONE); + vmi_check_page_type(clonepfn, VMI_PAGE_L2); + vmi_ops.allocate_page(pfn, VMI_PAGE_L2 | VMI_PAGE_CLONE, clonepfn, start, count); +} + +static void vmi_release_pt(u32 pfn) +{ + vmi_ops.release_page(pfn, VMI_PAGE_L1); + vmi_set_page_type(pfn, VMI_PAGE_NORMAL); +} + +static void vmi_release_pd(u32 pfn) +{ + vmi_ops.release_page(pfn, VMI_PAGE_L2); + vmi_set_page_type(pfn, VMI_PAGE_NORMAL); +} + +/* + * Helper macros for MMU update flags. We can defer updates until a flush + * or page invalidation only if the update is to the current address space + * (otherwise, there is no flush). We must check against init_mm, since + * this could be a kernel update, which usually passes init_mm, although + * sometimes this check can be skipped if we know the particular function + * is only called on user mode PTEs. We could change the kernel to pass + * current->active_mm here, but in particular, I was unsure if changing + * mm/highmem.c to do this would still be correct on other architectures. + */ +#define is_current_as(mm, mustbeuser) ((mm) == current->active_mm || \ + (!mustbeuser && (mm) == &init_mm)) +#define vmi_flags_addr(mm, addr, level, user) \ + ((level) | (is_current_as(mm, user) ? \ + (VMI_PAGE_CURRENT_AS | ((addr) & VMI_PAGE_VA_MASK)) : 0)) +#define vmi_flags_addr_defer(mm, addr, level, user) \ + ((level) | (is_current_as(mm, user) ? \ + (VMI_PAGE_DEFER | VMI_PAGE_CURRENT_AS | ((addr) & VMI_PAGE_VA_MASK)) : 0)) + +static void vmi_update_pte(struct mm_struct *mm, u32 addr, pte_t *ptep) +{ + vmi_check_page_type(__pa(ptep) >> PAGE_SHIFT, VMI_PAGE_PTE); + vmi_ops.update_pte(ptep, vmi_flags_addr(mm, addr, VMI_PAGE_PT, 0)); +} + +static void vmi_update_pte_defer(struct mm_struct *mm, u32 addr, pte_t *ptep) +{ + vmi_check_page_type(__pa(ptep) >> PAGE_SHIFT, VMI_PAGE_PTE); + vmi_ops.update_pte(ptep, vmi_flags_addr_defer(mm, addr, VMI_PAGE_PT, 0)); +} + +static void vmi_set_pte(pte_t *ptep, pte_t pte) +{ + /* XXX because of set_pmd_pte, this can be called on PT or PD layers */ + vmi_check_page_type(__pa(ptep) >> PAGE_SHIFT, VMI_PAGE_PTE | VMI_PAGE_PD); + vmi_ops.set_pte(pte, ptep, VMI_PAGE_PT); +} + +static void vmi_set_pte_at(struct mm_struct *mm, u32 addr, pte_t *ptep, pte_t pte) +{ + vmi_check_page_type(__pa(ptep) >> PAGE_SHIFT, VMI_PAGE_PTE); + vmi_ops.set_pte(pte, ptep, vmi_flags_addr(mm, addr, VMI_PAGE_PT, 0)); +} + +static void vmi_set_pmd(pmd_t *pmdp, pmd_t pmdval) +{ +#ifdef CONFIG_X86_PAE + const pte_t pte = { pmdval.pmd, pmdval.pmd >> 32 }; + vmi_check_page_type(__pa(pmdp) >> PAGE_SHIFT, VMI_PAGE_PMD); +#else + const pte_t pte = { pmdval.pud.pgd.pgd }; + vmi_check_page_type(__pa(pmdp) >> PAGE_SHIFT, VMI_PAGE_PGD); +#endif + vmi_ops.set_pte(pte, (pte_t *)pmdp, VMI_PAGE_PD); +} + +#ifdef CONFIG_X86_PAE + +static void vmi_set_pte_atomic(pte_t *ptep, pte_t pteval) +{ + /* + * XXX This is called from set_pmd_pte, but at both PT + * and PD layers so the VMI_PAGE_PT flag is wrong. But + * it is only called for large page mapping changes, + * the Xen backend, doesn't support large pages, and the + * ESX backend doesn't depend on the flag. + */ + set_64bit((unsigned long long *)ptep,pte_val(pteval)); + vmi_ops.update_pte(ptep, VMI_PAGE_PT); +} + +static void vmi_set_pte_present(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte) +{ + vmi_check_page_type(__pa(ptep) >> PAGE_SHIFT, VMI_PAGE_PTE); + vmi_ops.set_pte(pte, ptep, vmi_flags_addr_defer(mm, addr, VMI_PAGE_PT, 1)); +} + +static void vmi_set_pud(pud_t *pudp, pud_t pudval) +{ + /* Um, eww */ + const pte_t pte = { pudval.pgd.pgd, pudval.pgd.pgd >> 32 }; + vmi_check_page_type(__pa(pudp) >> PAGE_SHIFT, VMI_PAGE_PGD); + vmi_ops.set_pte(pte, (pte_t *)pudp, VMI_PAGE_PDP); +} + +static void vmi_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) +{ + const pte_t pte = { 0 }; + vmi_check_page_type(__pa(ptep) >> PAGE_SHIFT, VMI_PAGE_PTE); + vmi_ops.set_pte(pte, ptep, vmi_flags_addr(mm, addr, VMI_PAGE_PT, 0)); +} + +void vmi_pmd_clear(pmd_t *pmd) +{ + const pte_t pte = { 0 }; + vmi_check_page_type(__pa(pmd) >> PAGE_SHIFT, VMI_PAGE_PMD); + vmi_ops.set_pte(pte, (pte_t *)pmd, VMI_PAGE_PD); +} +#endif + +#ifdef CONFIG_SMP +struct vmi_ap_state ap; +extern void setup_pda(void); + +static void __init /* XXX cpu hotplug */ +vmi_startup_ipi_hook(int phys_apicid, unsigned long start_eip, + unsigned long start_esp) +{ + /* Default everything to zero. This is fine for most GPRs. */ + memset(&ap, 0, sizeof(struct vmi_ap_state)); + + ap.gdtr_limit = GDT_SIZE - 1; + ap.gdtr_base = (unsigned long) get_cpu_gdt_table(phys_apicid); + + ap.idtr_limit = IDT_ENTRIES * 8 - 1; + ap.idtr_base = (unsigned long) idt_table; + + ap.ldtr = 0; + + ap.cs = __KERNEL_CS; + ap.eip = (unsigned long) start_eip; + ap.ss = __KERNEL_DS; + ap.esp = (unsigned long) start_esp; + + ap.ds = __USER_DS; + ap.es = __USER_DS; + ap.fs = __KERNEL_PDA; + ap.gs = 0; + + ap.eflags = 0; + + setup_pda(); + +#ifdef CONFIG_X86_PAE + /* efer should match BSP efer. */ + if (cpu_has_nx) { + unsigned l, h; + rdmsr(MSR_EFER, l, h); + ap.efer = (unsigned long long) h << 32 | l; + } +#endif + + ap.cr3 = __pa(swapper_pg_dir); + /* Protected mode, paging, AM, WP, NE, MP. */ + ap.cr0 = 0x80050023; + ap.cr4 = mmu_cr4_features; + vmi_ops.set_initial_ap_state(__pa(&ap), phys_apicid); +} +#endif + +static inline int __init check_vmi_rom(struct vrom_header *rom) +{ + struct pci_header *pci; + struct pnp_header *pnp; + const char *manufacturer = "UNKNOWN"; + const char *product = "UNKNOWN"; + const char *license = "unspecified"; + + if (rom->rom_signature != 0xaa55) + return 0; + if (rom->vrom_signature != VMI_SIGNATURE) + return 0; + if (rom->api_version_maj != VMI_API_REV_MAJOR || + rom->api_version_min+1 < VMI_API_REV_MINOR+1) { + printk(KERN_WARNING "VMI: Found mismatched rom version %d.%d\n", + rom->api_version_maj, + rom->api_version_min); + return 0; + } + + /* + * Relying on the VMI_SIGNATURE field is not 100% safe, so check + * the PCI header and device type to make sure this is really a + * VMI device. + */ + if (!rom->pci_header_offs) { + printk(KERN_WARNING "VMI: ROM does not contain PCI header.\n"); + return 0; + } + + pci = (struct pci_header *)((char *)rom+rom->pci_header_offs); + if (pci->vendorID != PCI_VENDOR_ID_VMWARE || + pci->deviceID != PCI_DEVICE_ID_VMWARE_VMI) { + /* Allow it to run... anyways, but warn */ + printk(KERN_WARNING "VMI: ROM from unknown manufacturer\n"); + } + + if (rom->pnp_header_offs) { + pnp = (struct pnp_header *)((char *)rom+rom->pnp_header_offs); + if (pnp->manufacturer_offset) + manufacturer = (const char *)rom+pnp->manufacturer_offset; + if (pnp->product_offset) + product = (const char *)rom+pnp->product_offset; + } + + if (rom->license_offs) + license = (char *)rom+rom->license_offs; + + printk(KERN_INFO "VMI: Found %s %s, API version %d.%d, ROM version %d.%d\n", + manufacturer, product, + rom->api_version_maj, rom->api_version_min, + pci->rom_version_maj, pci->rom_version_min); + + license_gplok = license_is_gpl_compatible(license); + if (!license_gplok) { + printk(KERN_WARNING "VMI: ROM license '%s' taints kernel... " + "inlining disabled\n", + license); + add_taint(TAINT_PROPRIETARY_MODULE); + } + return 1; +} + +/* + * Probe for the VMI option ROM + */ +static inline int __init probe_vmi_rom(void) +{ + unsigned long base; + + /* VMI ROM is in option ROM area, check signature */ + for (base = 0xC0000; base < 0xE0000; base += 2048) { + struct vrom_header *romstart; + romstart = (struct vrom_header *)isa_bus_to_virt(base); + if (check_vmi_rom(romstart)) { + vmi_rom = romstart; + return 1; + } + } + return 0; +} + +/* + * VMI setup common to all processors + */ +void vmi_bringup(void) +{ + /* We must establish the lowmem mapping for MMU ops to work */ + if (vmi_rom) + vmi_ops.set_linear_mapping(0, __PAGE_OFFSET, max_low_pfn, 0); +} + +/* + * Return a pointer to the VMI function or a NOP stub + */ +static void *vmi_get_function(int vmicall) +{ + u64 reloc; + const struct vmi_relocation_info *rel = (struct vmi_relocation_info *)&reloc; + reloc = call_vrom_long_func(vmi_rom, get_reloc, vmicall); + BUG_ON(rel->type == VMI_RELOCATION_JUMP_REL); + if (rel->type == VMI_RELOCATION_CALL_REL) + return (void *)rel->eip; + else + return (void *)vmi_nop; +} + +/* + * Helper macro for making the VMI paravirt-ops fill code readable. + * For unimplemented operations, fall back to default. + */ +#define para_fill(opname, vmicall) \ +do { \ + reloc = call_vrom_long_func(vmi_rom, get_reloc, \ + VMI_CALL_##vmicall); \ + if (rel->type != VMI_RELOCATION_NONE) { \ + BUG_ON(rel->type != VMI_RELOCATION_CALL_REL); \ + paravirt_ops.opname = (void *)rel->eip; \ + } \ +} while (0) + +/* + * Activate the VMI interface and switch into paravirtualized mode + */ +static inline int __init activate_vmi(void) +{ + short kernel_cs; + u64 reloc; + const struct vmi_relocation_info *rel = (struct vmi_relocation_info *)&reloc; + + if (call_vrom_func(vmi_rom, vmi_init) != 0) { + printk(KERN_ERR "VMI ROM failed to initialize!"); + return 0; + } + savesegment(cs, kernel_cs); + + paravirt_ops.paravirt_enabled = 1; + paravirt_ops.kernel_rpl = kernel_cs & SEGMENT_RPL_MASK; + + paravirt_ops.patch = vmi_patch; + paravirt_ops.name = "vmi"; + + /* + * Many of these operations are ABI compatible with VMI. + * This means we can fill in the paravirt-ops with direct + * pointers into the VMI ROM. If the calling convention for + * these operations changes, this code needs to be updated. + * + * Exceptions + * CPUID paravirt-op uses pointers, not the native ISA + * halt has no VMI equivalent; all VMI halts are "safe" + * no MSR support yet - just trap and emulate. VMI uses the + * same ABI as the native ISA, but Linux wants exceptions + * from bogus MSR read / write handled + * rdpmc is not yet used in Linux + */ + + /* CPUID is special, so very special */ + reloc = call_vrom_long_func(vmi_rom, get_reloc, VMI_CALL_CPUID); + if (rel->type != VMI_RELOCATION_NONE) { + BUG_ON(rel->type != VMI_RELOCATION_CALL_REL); + vmi_ops.cpuid = (void *)rel->eip; + paravirt_ops.cpuid = vmi_cpuid; + } + + para_fill(clts, CLTS); + para_fill(get_debugreg, GetDR); + para_fill(set_debugreg, SetDR); + para_fill(read_cr0, GetCR0); + para_fill(read_cr2, GetCR2); + para_fill(read_cr3, GetCR3); + para_fill(read_cr4, GetCR4); + para_fill(write_cr0, SetCR0); + para_fill(write_cr2, SetCR2); + para_fill(write_cr3, SetCR3); + para_fill(write_cr4, SetCR4); + para_fill(save_fl, GetInterruptMask); + para_fill(restore_fl, SetInterruptMask); + para_fill(irq_disable, DisableInterrupts); + para_fill(irq_enable, EnableInterrupts); + /* irq_save_disable !!! sheer pain */ + patch_offset(&irq_save_disable_callout[IRQ_PATCH_INT_MASK], + (char *)paravirt_ops.save_fl); + patch_offset(&irq_save_disable_callout[IRQ_PATCH_DISABLE], + (char *)paravirt_ops.irq_disable); + para_fill(safe_halt, Halt); + para_fill(wbinvd, WBINVD); + /* paravirt_ops.read_msr = vmi_rdmsr */ + /* paravirt_ops.write_msr = vmi_wrmsr */ + para_fill(read_tsc, RDTSC); + /* paravirt_ops.rdpmc = vmi_rdpmc */ + + /* TR interface doesn't pass TR value */ + reloc = call_vrom_long_func(vmi_rom, get_reloc, VMI_CALL_SetTR); + if (rel->type != VMI_RELOCATION_NONE) { + BUG_ON(rel->type != VMI_RELOCATION_CALL_REL); + vmi_ops.set_tr = (void *)rel->eip; + paravirt_ops.load_tr_desc = vmi_set_tr; + } + + /* LDT is special, too */ + reloc = call_vrom_long_func(vmi_rom, get_reloc, VMI_CALL_SetLDT); + if (rel->type != VMI_RELOCATION_NONE) { + BUG_ON(rel->type != VMI_RELOCATION_CALL_REL); + vmi_ops._set_ldt = (void *)rel->eip; + paravirt_ops.set_ldt = vmi_set_ldt; + } + + para_fill(load_gdt, SetGDT); + para_fill(load_idt, SetIDT); + para_fill(store_gdt, GetGDT); + para_fill(store_idt, GetIDT); + para_fill(store_tr, GetTR); + paravirt_ops.load_tls = vmi_load_tls; + para_fill(write_ldt_entry, WriteLDTEntry); + para_fill(write_gdt_entry, WriteGDTEntry); + para_fill(write_idt_entry, WriteIDTEntry); + reloc = call_vrom_long_func(vmi_rom, get_reloc, + VMI_CALL_UpdateKernelStack); + if (rel->type != VMI_RELOCATION_NONE) { + BUG_ON(rel->type != VMI_RELOCATION_CALL_REL); + vmi_ops.set_kernel_stack = (void *)rel->eip; + paravirt_ops.load_esp0 = vmi_load_esp0; + } + + para_fill(set_iopl_mask, SetIOPLMask); + paravirt_ops.io_delay = (void *)vmi_nop; + if (!disable_nodelay) { + paravirt_ops.const_udelay = (void *)vmi_nop; + } + + para_fill(set_lazy_mode, SetLazyMode); + + reloc = call_vrom_long_func(vmi_rom, get_reloc, VMI_CALL_FlushTLB); + if (rel->type != VMI_RELOCATION_NONE) { + vmi_ops.flush_tlb = (void *)rel->eip; + paravirt_ops.flush_tlb_user = vmi_flush_tlb_user; + paravirt_ops.flush_tlb_kernel = vmi_flush_tlb_kernel; + } + para_fill(flush_tlb_single, InvalPage); + + /* + * Until a standard flag format can be agreed on, we need to + * implement these as wrappers in Linux. Get the VMI ROM + * function pointers for the two backend calls. + */ +#ifdef CONFIG_X86_PAE + vmi_ops.set_pte = vmi_get_function(VMI_CALL_SetPxELong); + vmi_ops.update_pte = vmi_get_function(VMI_CALL_UpdatePxELong); +#else + vmi_ops.set_pte = vmi_get_function(VMI_CALL_SetPxE); + vmi_ops.update_pte = vmi_get_function(VMI_CALL_UpdatePxE); +#endif + vmi_ops.set_linear_mapping = vmi_get_function(VMI_CALL_SetLinearMapping); + vmi_ops.allocate_page = vmi_get_function(VMI_CALL_AllocatePage); + vmi_ops.release_page = vmi_get_function(VMI_CALL_ReleasePage); + + paravirt_ops.alloc_pt = vmi_allocate_pt; + paravirt_ops.alloc_pd = vmi_allocate_pd; + paravirt_ops.alloc_pd_clone = vmi_allocate_pd_clone; + paravirt_ops.release_pt = vmi_release_pt; + paravirt_ops.release_pd = vmi_release_pd; + paravirt_ops.set_pte = vmi_set_pte; + paravirt_ops.set_pte_at = vmi_set_pte_at; + paravirt_ops.set_pmd = vmi_set_pmd; + paravirt_ops.pte_update = vmi_update_pte; + paravirt_ops.pte_update_defer = vmi_update_pte_defer; +#ifdef CONFIG_X86_PAE + paravirt_ops.set_pte_atomic = vmi_set_pte_atomic; + paravirt_ops.set_pte_present = vmi_set_pte_present; + paravirt_ops.set_pud = vmi_set_pud; + paravirt_ops.pte_clear = vmi_pte_clear; + paravirt_ops.pmd_clear = vmi_pmd_clear; +#endif + /* + * These MUST always be patched. Don't support indirect jumps + * through these operations, as the VMI interface may use either + * a jump or a call to get to these operations, depending on + * the backend. They are performance critical anyway, so requiring + * a patch is not a big problem. + */ + paravirt_ops.irq_enable_sysexit = (void *)0xfeedbab0; + paravirt_ops.iret = (void *)0xbadbab0; + +#ifdef CONFIG_SMP + paravirt_ops.startup_ipi_hook = vmi_startup_ipi_hook; + vmi_ops.set_initial_ap_state = vmi_get_function(VMI_CALL_SetInitialAPState); +#endif + +#ifdef CONFIG_X86_LOCAL_APIC + paravirt_ops.apic_read = vmi_get_function(VMI_CALL_APICRead); + paravirt_ops.apic_write = vmi_get_function(VMI_CALL_APICWrite); + paravirt_ops.apic_write_atomic = vmi_get_function(VMI_CALL_APICWrite); +#endif + + /* + * Alternative instruction rewriting doesn't happen soon enough + * to convert VMI_IRET to a call instead of a jump; so we have + * to do this before IRQs get reenabled. Fortunately, it is + * idempotent. + */ + apply_paravirt(__start_parainstructions, __stop_parainstructions); + + vmi_bringup(); + + return 1; +} + +#undef para_fill + +void __init vmi_init(void) +{ + unsigned long flags; + + if (!vmi_rom) + probe_vmi_rom(); + else + check_vmi_rom(vmi_rom); + + /* In case probing for or validating the ROM failed, basil */ + if (!vmi_rom) + return; + + reserve_top_address(-vmi_rom->virtual_top); + + local_irq_save(flags); + activate_vmi(); +#ifdef CONFIG_SMP + no_timer_check = 1; +#endif + local_irq_restore(flags & X86_EFLAGS_IF); +} + +static int __init parse_vmi(char *arg) +{ + if (!arg) + return -EINVAL; + + if (!strcmp(arg, "disable_nodelay")) + disable_nodelay = 1; + else if (!strcmp(arg, "disable_pge")) { + clear_bit(X86_FEATURE_PGE, boot_cpu_data.x86_capability); + disable_pge = 1; + } else if (!strcmp(arg, "disable_pse")) { + clear_bit(X86_FEATURE_PSE, boot_cpu_data.x86_capability); + disable_pse = 1; + } else if (!strcmp(arg, "disable_sep")) { + clear_bit(X86_FEATURE_SEP, boot_cpu_data.x86_capability); + disable_sep = 1; + } else if (!strcmp(arg, "disable_tsc")) { + clear_bit(X86_FEATURE_TSC, boot_cpu_data.x86_capability); + disable_tsc = 1; + } else if (!strcmp(arg, "disable_mtrr")) { + clear_bit(X86_FEATURE_MTRR, boot_cpu_data.x86_capability); + disable_mtrr = 1; + } + return 0; +} + +early_param("vmi", parse_vmi); diff --git a/arch/i386/mm/pgtable.c b/arch/i386/mm/pgtable.c index b5f538f52272..fa0cfbd551e1 100644 --- a/arch/i386/mm/pgtable.c +++ b/arch/i386/mm/pgtable.c @@ -171,6 +171,8 @@ void __set_fixmap (enum fixed_addresses idx, unsigned long phys, pgprot_t flags) void reserve_top_address(unsigned long reserve) { BUG_ON(fixmaps > 0); + printk(KERN_INFO "Reserving virtual address space above 0x%08x\n", + (int)-reserve); #ifdef CONFIG_COMPAT_VDSO BUG_ON(reserve != 0); #else -- cgit v1.2.3 From bbab4f3bb7f528d2b8ccb5de9ae5f6ff3fb29684 Mon Sep 17 00:00:00 2001 From: Zachary Amsden Date: Tue, 13 Feb 2007 13:26:21 +0100 Subject: [PATCH] i386: vMI timer patches VMI timer code. It works by taking over the local APIC clock when APIC is configured, which requires a couple hooks into the APIC code. The backend timer code could be commonized into the timer infrastructure, but there are some pieces missing (stolen time, in particular), and the exact semantics of when to do accounting for NO_IDLE need to be shared between different hypervisors as well. So for now, VMI timer is a separate module. [Adrian Bunk: cleanups] Subject: VMI timer patches Signed-off-by: Zachary Amsden Signed-off-by: Andi Kleen Cc: Andi Kleen Cc: Jeremy Fitzhardinge Cc: Rusty Russell Cc: Chris Wright Signed-off-by: Andrew Morton --- arch/i386/Kconfig | 9 + arch/i386/kernel/Makefile | 2 +- arch/i386/kernel/apic.c | 2 +- arch/i386/kernel/entry.S | 5 + arch/i386/kernel/paravirt.c | 2 + arch/i386/kernel/smpboot.c | 4 +- arch/i386/kernel/time.c | 4 +- arch/i386/kernel/tsc.c | 4 + arch/i386/kernel/vmi.c | 45 ++++ arch/i386/kernel/vmitime.c | 495 ++++++++++++++++++++++++++++++++++++++++++++ 10 files changed, 567 insertions(+), 5 deletions(-) create mode 100644 arch/i386/kernel/vmitime.c (limited to 'arch') diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig index a3b3f6ee3642..595fb771366e 100644 --- a/arch/i386/Kconfig +++ b/arch/i386/Kconfig @@ -1272,3 +1272,12 @@ config X86_TRAMPOLINE config KTIME_SCALAR bool default y + +config NO_IDLE_HZ + bool + depends on PARAVIRT + default y + help + Switches the regular HZ timer off when the system is going idle. + This helps a hypervisor detect that the Linux system is idle, + reducing the overhead of idle systems. diff --git a/arch/i386/kernel/Makefile b/arch/i386/kernel/Makefile index 9cfb58911f14..97f1e961d684 100644 --- a/arch/i386/kernel/Makefile +++ b/arch/i386/kernel/Makefile @@ -40,7 +40,7 @@ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_HPET_TIMER) += hpet.o obj-$(CONFIG_K8_NB) += k8.o -obj-$(CONFIG_VMI) += vmi.o +obj-$(CONFIG_VMI) += vmi.o vmitime.o # Make sure this is linked after any other paravirt_ops structs: see head.S obj-$(CONFIG_PARAVIRT) += paravirt.o diff --git a/arch/i386/kernel/apic.c b/arch/i386/kernel/apic.c index 776d9be26af9..629c5ed94260 100644 --- a/arch/i386/kernel/apic.c +++ b/arch/i386/kernel/apic.c @@ -1395,7 +1395,7 @@ int __init APIC_init_uniprocessor (void) if (!skip_ioapic_setup && nr_ioapics) setup_IO_APIC(); #endif - setup_boot_APIC_clock(); + setup_boot_clock(); return 0; } diff --git a/arch/i386/kernel/entry.S b/arch/i386/kernel/entry.S index 8c6a22a42d2e..d4b4ffc9eacb 100644 --- a/arch/i386/kernel/entry.S +++ b/arch/i386/kernel/entry.S @@ -626,6 +626,11 @@ ENTRY(name) \ /* The include is where all of the SMP etc. interrupts come from */ #include "entry_arch.h" +/* This alternate entry is needed because we hijack the apic LVTT */ +#if defined(CONFIG_VMI) && defined(CONFIG_X86_LOCAL_APIC) +BUILD_INTERRUPT(apic_vmi_timer_interrupt,LOCAL_TIMER_VECTOR) +#endif + KPROBE_ENTRY(page_fault) RING0_EC_FRAME pushl $do_page_fault diff --git a/arch/i386/kernel/paravirt.c b/arch/i386/kernel/paravirt.c index 5bf81059a7e6..2003733310dc 100644 --- a/arch/i386/kernel/paravirt.c +++ b/arch/i386/kernel/paravirt.c @@ -544,6 +544,8 @@ struct paravirt_ops paravirt_ops = { .apic_write = native_apic_write, .apic_write_atomic = native_apic_write_atomic, .apic_read = native_apic_read, + .setup_boot_clock = setup_boot_APIC_clock, + .setup_secondary_clock = setup_secondary_APIC_clock, #endif .set_lazy_mode = (void *)native_nop, diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c index 42502d820e4f..5a00b07e7194 100644 --- a/arch/i386/kernel/smpboot.c +++ b/arch/i386/kernel/smpboot.c @@ -554,7 +554,7 @@ static void __cpuinit start_secondary(void *unused) smp_callin(); while (!cpu_isset(smp_processor_id(), smp_commenced_mask)) rep_nop(); - setup_secondary_APIC_clock(); + setup_secondary_clock(); if (nmi_watchdog == NMI_IO_APIC) { disable_8259A_irq(0); enable_NMI_through_LVT0(NULL); @@ -1331,7 +1331,7 @@ static void __init smp_boot_cpus(unsigned int max_cpus) smpboot_setup_io_apic(); - setup_boot_APIC_clock(); + setup_boot_clock(); /* * Synchronize the TSC with the AP diff --git a/arch/i386/kernel/time.c b/arch/i386/kernel/time.c index c505b16c0990..9603ccaba997 100644 --- a/arch/i386/kernel/time.c +++ b/arch/i386/kernel/time.c @@ -232,6 +232,7 @@ EXPORT_SYMBOL(get_cmos_time); static void sync_cmos_clock(unsigned long dummy); static DEFINE_TIMER(sync_cmos_timer, sync_cmos_clock, 0, 0); +int no_sync_cmos_clock; static void sync_cmos_clock(unsigned long dummy) { @@ -275,7 +276,8 @@ static void sync_cmos_clock(unsigned long dummy) void notify_arch_cmos_timer(void) { - mod_timer(&sync_cmos_timer, jiffies + 1); + if (!no_sync_cmos_clock) + mod_timer(&sync_cmos_timer, jiffies + 1); } static long clock_cmos_diff; diff --git a/arch/i386/kernel/tsc.c b/arch/i386/kernel/tsc.c index 2cfc7b09b925..12fef14995a5 100644 --- a/arch/i386/kernel/tsc.c +++ b/arch/i386/kernel/tsc.c @@ -23,6 +23,7 @@ * an extra value to store the TSC freq */ unsigned int tsc_khz; +unsigned long long (*custom_sched_clock)(void); int tsc_disable; @@ -107,6 +108,9 @@ unsigned long long sched_clock(void) { unsigned long long this_offset; + if (unlikely(custom_sched_clock)) + return (*custom_sched_clock)(); + /* * in the NUMA case we dont use the TSC as they are not * synchronized across all CPUs. diff --git a/arch/i386/kernel/vmi.c b/arch/i386/kernel/vmi.c index a94d64b10f75..bb5a7abf949c 100644 --- a/arch/i386/kernel/vmi.c +++ b/arch/i386/kernel/vmi.c @@ -34,6 +34,7 @@ #include #include #include +#include /* Convenient for calling VMI functions indirectly in the ROM */ typedef u32 __attribute__((regparm(1))) (VROMFUNC)(void); @@ -67,6 +68,7 @@ struct { void (*set_linear_mapping)(int, u32, u32, u32); void (*flush_tlb)(int); void (*set_initial_ap_state)(int, int); + void (*halt)(void); } vmi_ops; /* XXX move this to alternative.h */ @@ -252,6 +254,19 @@ static void vmi_nop(void) { } +/* For NO_IDLE_HZ, we stop the clock when halting the kernel */ +#ifdef CONFIG_NO_IDLE_HZ +static fastcall void vmi_safe_halt(void) +{ + int idle = vmi_stop_hz_timer(); + vmi_ops.halt(); + if (idle) { + local_irq_disable(); + vmi_account_time_restart_hz_timer(); + local_irq_enable(); + } +} +#endif #ifdef CONFIG_DEBUG_PAGE_TYPE @@ -727,7 +742,12 @@ static inline int __init activate_vmi(void) (char *)paravirt_ops.save_fl); patch_offset(&irq_save_disable_callout[IRQ_PATCH_DISABLE], (char *)paravirt_ops.irq_disable); +#ifndef CONFIG_NO_IDLE_HZ para_fill(safe_halt, Halt); +#else + vmi_ops.halt = vmi_get_function(VMI_CALL_Halt); + paravirt_ops.safe_halt = vmi_safe_halt; +#endif para_fill(wbinvd, WBINVD); /* paravirt_ops.read_msr = vmi_rdmsr */ /* paravirt_ops.write_msr = vmi_wrmsr */ @@ -837,6 +857,31 @@ static inline int __init activate_vmi(void) paravirt_ops.apic_write_atomic = vmi_get_function(VMI_CALL_APICWrite); #endif + /* + * Check for VMI timer functionality by probing for a cycle frequency method + */ + reloc = call_vrom_long_func(vmi_rom, get_reloc, VMI_CALL_GetCycleFrequency); + if (rel->type != VMI_RELOCATION_NONE) { + vmi_timer_ops.get_cycle_frequency = (void *)rel->eip; + vmi_timer_ops.get_cycle_counter = + vmi_get_function(VMI_CALL_GetCycleCounter); + vmi_timer_ops.get_wallclock = + vmi_get_function(VMI_CALL_GetWallclockTime); + vmi_timer_ops.wallclock_updated = + vmi_get_function(VMI_CALL_WallclockUpdated); + vmi_timer_ops.set_alarm = vmi_get_function(VMI_CALL_SetAlarm); + vmi_timer_ops.cancel_alarm = + vmi_get_function(VMI_CALL_CancelAlarm); + paravirt_ops.time_init = vmi_time_init; + paravirt_ops.get_wallclock = vmi_get_wallclock; + paravirt_ops.set_wallclock = vmi_set_wallclock; +#ifdef CONFIG_X86_LOCAL_APIC + paravirt_ops.setup_boot_clock = vmi_timer_setup_boot_alarm; + paravirt_ops.setup_secondary_clock = vmi_timer_setup_secondary_alarm; +#endif + custom_sched_clock = vmi_sched_clock; + } + /* * Alternative instruction rewriting doesn't happen soon enough * to convert VMI_IRET to a call instead of a jump; so we have diff --git a/arch/i386/kernel/vmitime.c b/arch/i386/kernel/vmitime.c new file mode 100644 index 000000000000..7c3033dbe5f5 --- /dev/null +++ b/arch/i386/kernel/vmitime.c @@ -0,0 +1,495 @@ +/* + * VMI paravirtual timer support routines. + * + * Copyright (C) 2005, VMware, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Send feedback to dhecht@vmware.com + * + */ + +/* + * Portions of this code from arch/i386/kernel/timers/timer_tsc.c. + * Portions of the CONFIG_NO_IDLE_HZ code from arch/s390/kernel/time.c. + * See comments there for proper credits. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include + +#ifdef CONFIG_X86_LOCAL_APIC +#define VMI_ALARM_WIRING VMI_ALARM_WIRED_LVTT +#else +#define VMI_ALARM_WIRING VMI_ALARM_WIRED_IRQ0 +#endif + +/* Cached VMI operations */ +struct vmi_timer_ops vmi_timer_ops; + +#ifdef CONFIG_NO_IDLE_HZ + +/* /proc/sys/kernel/hz_timer state. */ +int sysctl_hz_timer; + +/* Some stats */ +static DEFINE_PER_CPU(unsigned long, vmi_idle_no_hz_irqs); +static DEFINE_PER_CPU(unsigned long, vmi_idle_no_hz_jiffies); +static DEFINE_PER_CPU(unsigned long, idle_start_jiffies); + +#endif /* CONFIG_NO_IDLE_HZ */ + +/* Number of alarms per second. By default this is CONFIG_VMI_ALARM_HZ. */ +static int alarm_hz = CONFIG_VMI_ALARM_HZ; + +/* Cache of the value get_cycle_frequency / HZ. */ +static signed long long cycles_per_jiffy; + +/* Cache of the value get_cycle_frequency / alarm_hz. */ +static signed long long cycles_per_alarm; + +/* The number of cycles accounted for by the 'jiffies'/'xtime' count. + * Protected by xtime_lock. */ +static unsigned long long real_cycles_accounted_system; + +/* The number of cycles accounted for by update_process_times(), per cpu. */ +static DEFINE_PER_CPU(unsigned long long, process_times_cycles_accounted_cpu); + +/* The number of stolen cycles accounted, per cpu. */ +static DEFINE_PER_CPU(unsigned long long, stolen_cycles_accounted_cpu); + +/* Clock source. */ +static cycle_t read_real_cycles(void) +{ + return vmi_timer_ops.get_cycle_counter(VMI_CYCLES_REAL); +} + +static cycle_t read_available_cycles(void) +{ + return vmi_timer_ops.get_cycle_counter(VMI_CYCLES_AVAILABLE); +} + +#if 0 +static cycle_t read_stolen_cycles(void) +{ + return vmi_timer_ops.get_cycle_counter(VMI_CYCLES_STOLEN); +} +#endif /* 0 */ + +static struct clocksource clocksource_vmi = { + .name = "vmi-timer", + .rating = 450, + .read = read_real_cycles, + .mask = CLOCKSOURCE_MASK(64), + .mult = 0, /* to be set */ + .shift = 22, + .is_continuous = 1, +}; + + +/* Timer interrupt handler. */ +static irqreturn_t vmi_timer_interrupt(int irq, void *dev_id); + +static struct irqaction vmi_timer_irq = { + vmi_timer_interrupt, + SA_INTERRUPT, + CPU_MASK_NONE, + "VMI-alarm", + NULL, + NULL +}; + +/* Alarm rate */ +static int __init vmi_timer_alarm_rate_setup(char* str) +{ + int alarm_rate; + if (get_option(&str, &alarm_rate) == 1 && alarm_rate > 0) { + alarm_hz = alarm_rate; + printk(KERN_WARNING "VMI timer alarm HZ set to %d\n", alarm_hz); + } + return 1; +} +__setup("vmi_timer_alarm_hz=", vmi_timer_alarm_rate_setup); + + +/* Initialization */ +static void vmi_get_wallclock_ts(struct timespec *ts) +{ + unsigned long long wallclock; + wallclock = vmi_timer_ops.get_wallclock(); // nsec units + ts->tv_nsec = do_div(wallclock, 1000000000); + ts->tv_sec = wallclock; +} + +static void update_xtime_from_wallclock(void) +{ + struct timespec ts; + vmi_get_wallclock_ts(&ts); + do_settimeofday(&ts); +} + +unsigned long vmi_get_wallclock(void) +{ + struct timespec ts; + vmi_get_wallclock_ts(&ts); + return ts.tv_sec; +} + +int vmi_set_wallclock(unsigned long now) +{ + return -1; +} + +unsigned long long vmi_sched_clock(void) +{ + return read_available_cycles(); +} + +void __init vmi_time_init(void) +{ + unsigned long long cycles_per_sec, cycles_per_msec; + + setup_irq(0, &vmi_timer_irq); +#ifdef CONFIG_X86_LOCAL_APIC + set_intr_gate(LOCAL_TIMER_VECTOR, apic_vmi_timer_interrupt); +#endif + + no_sync_cmos_clock = 1; + + vmi_get_wallclock_ts(&xtime); + set_normalized_timespec(&wall_to_monotonic, + -xtime.tv_sec, -xtime.tv_nsec); + + real_cycles_accounted_system = read_real_cycles(); + update_xtime_from_wallclock(); + per_cpu(process_times_cycles_accounted_cpu, 0) = read_available_cycles(); + + cycles_per_sec = vmi_timer_ops.get_cycle_frequency(); + + cycles_per_jiffy = cycles_per_sec; + (void)do_div(cycles_per_jiffy, HZ); + cycles_per_alarm = cycles_per_sec; + (void)do_div(cycles_per_alarm, alarm_hz); + cycles_per_msec = cycles_per_sec; + (void)do_div(cycles_per_msec, 1000); + cpu_khz = cycles_per_msec; + + printk(KERN_WARNING "VMI timer cycles/sec = %llu ; cycles/jiffy = %llu ;" + "cycles/alarm = %llu\n", cycles_per_sec, cycles_per_jiffy, + cycles_per_alarm); + + clocksource_vmi.mult = clocksource_khz2mult(cycles_per_msec, + clocksource_vmi.shift); + if (clocksource_register(&clocksource_vmi)) + printk(KERN_WARNING "Error registering VMITIME clocksource."); + + /* Disable PIT. */ + outb_p(0x3a, PIT_MODE); /* binary, mode 5, LSB/MSB, ch 0 */ + + /* schedule the alarm. do this in phase with process_times_cycles_accounted_cpu + * reduce the latency calling update_process_times. */ + vmi_timer_ops.set_alarm( + VMI_ALARM_WIRED_IRQ0 | VMI_ALARM_IS_PERIODIC | VMI_CYCLES_AVAILABLE, + per_cpu(process_times_cycles_accounted_cpu, 0) + cycles_per_alarm, + cycles_per_alarm); +} + +#ifdef CONFIG_X86_LOCAL_APIC + +void __init vmi_timer_setup_boot_alarm(void) +{ + local_irq_disable(); + + /* Route the interrupt to the correct vector. */ + apic_write_around(APIC_LVTT, LOCAL_TIMER_VECTOR); + + /* Cancel the IRQ0 wired alarm, and setup the LVTT alarm. */ + vmi_timer_ops.cancel_alarm(VMI_CYCLES_AVAILABLE); + vmi_timer_ops.set_alarm( + VMI_ALARM_WIRED_LVTT | VMI_ALARM_IS_PERIODIC | VMI_CYCLES_AVAILABLE, + per_cpu(process_times_cycles_accounted_cpu, 0) + cycles_per_alarm, + cycles_per_alarm); + local_irq_enable(); +} + +/* Initialize the time accounting variables for an AP on an SMP system. + * Also, set the local alarm for the AP. */ +void __init vmi_timer_setup_secondary_alarm(void) +{ + int cpu = smp_processor_id(); + + /* Route the interrupt to the correct vector. */ + apic_write_around(APIC_LVTT, LOCAL_TIMER_VECTOR); + + per_cpu(process_times_cycles_accounted_cpu, cpu) = read_available_cycles(); + + vmi_timer_ops.set_alarm( + VMI_ALARM_WIRED_LVTT | VMI_ALARM_IS_PERIODIC | VMI_CYCLES_AVAILABLE, + per_cpu(process_times_cycles_accounted_cpu, cpu) + cycles_per_alarm, + cycles_per_alarm); +} + +#endif + +/* Update system wide (real) time accounting (e.g. jiffies, xtime). */ +static void vmi_account_real_cycles(unsigned long long cur_real_cycles) +{ + long long cycles_not_accounted; + + write_seqlock(&xtime_lock); + + cycles_not_accounted = cur_real_cycles - real_cycles_accounted_system; + while (cycles_not_accounted >= cycles_per_jiffy) { + /* systems wide jiffies and wallclock. */ + do_timer(1); + + cycles_not_accounted -= cycles_per_jiffy; + real_cycles_accounted_system += cycles_per_jiffy; + } + + if (vmi_timer_ops.wallclock_updated()) + update_xtime_from_wallclock(); + + write_sequnlock(&xtime_lock); +} + +/* Update per-cpu process times. */ +static void vmi_account_process_times_cycles(struct pt_regs *regs, int cpu, + unsigned long long cur_process_times_cycles) +{ + long long cycles_not_accounted; + cycles_not_accounted = cur_process_times_cycles - + per_cpu(process_times_cycles_accounted_cpu, cpu); + + while (cycles_not_accounted >= cycles_per_jiffy) { + /* Account time to the current process. This includes + * calling into the scheduler to decrement the timeslice + * and possibly reschedule.*/ + update_process_times(user_mode(regs)); + /* XXX handle /proc/profile multiplier. */ + profile_tick(CPU_PROFILING); + + cycles_not_accounted -= cycles_per_jiffy; + per_cpu(process_times_cycles_accounted_cpu, cpu) += cycles_per_jiffy; + } +} + +#ifdef CONFIG_NO_IDLE_HZ +/* Update per-cpu idle times. Used when a no-hz halt is ended. */ +static void vmi_account_no_hz_idle_cycles(int cpu, + unsigned long long cur_process_times_cycles) +{ + long long cycles_not_accounted; + unsigned long no_idle_hz_jiffies = 0; + + cycles_not_accounted = cur_process_times_cycles - + per_cpu(process_times_cycles_accounted_cpu, cpu); + + while (cycles_not_accounted >= cycles_per_jiffy) { + no_idle_hz_jiffies++; + cycles_not_accounted -= cycles_per_jiffy; + per_cpu(process_times_cycles_accounted_cpu, cpu) += cycles_per_jiffy; + } + /* Account time to the idle process. */ + account_steal_time(idle_task(cpu), jiffies_to_cputime(no_idle_hz_jiffies)); +} +#endif + +/* Update per-cpu stolen time. */ +static void vmi_account_stolen_cycles(int cpu, + unsigned long long cur_real_cycles, + unsigned long long cur_avail_cycles) +{ + long long stolen_cycles_not_accounted; + unsigned long stolen_jiffies = 0; + + if (cur_real_cycles < cur_avail_cycles) + return; + + stolen_cycles_not_accounted = cur_real_cycles - cur_avail_cycles - + per_cpu(stolen_cycles_accounted_cpu, cpu); + + while (stolen_cycles_not_accounted >= cycles_per_jiffy) { + stolen_jiffies++; + stolen_cycles_not_accounted -= cycles_per_jiffy; + per_cpu(stolen_cycles_accounted_cpu, cpu) += cycles_per_jiffy; + } + /* HACK: pass NULL to force time onto cpustat->steal. */ + account_steal_time(NULL, jiffies_to_cputime(stolen_jiffies)); +} + +/* Body of either IRQ0 interrupt handler (UP no local-APIC) or + * local-APIC LVTT interrupt handler (UP & local-APIC or SMP). */ +static void vmi_local_timer_interrupt(int cpu) +{ + unsigned long long cur_real_cycles, cur_process_times_cycles; + + cur_real_cycles = read_real_cycles(); + cur_process_times_cycles = read_available_cycles(); + /* Update system wide (real) time state (xtime, jiffies). */ + vmi_account_real_cycles(cur_real_cycles); + /* Update per-cpu process times. */ + vmi_account_process_times_cycles(get_irq_regs(), cpu, cur_process_times_cycles); + /* Update time stolen from this cpu by the hypervisor. */ + vmi_account_stolen_cycles(cpu, cur_real_cycles, cur_process_times_cycles); +} + +#ifdef CONFIG_NO_IDLE_HZ + +/* Must be called only from idle loop, with interrupts disabled. */ +int vmi_stop_hz_timer(void) +{ + /* Note that cpu_set, cpu_clear are (SMP safe) atomic on x86. */ + + unsigned long seq, next; + unsigned long long real_cycles_expiry; + int cpu = smp_processor_id(); + int idle; + + BUG_ON(!irqs_disabled()); + if (sysctl_hz_timer != 0) + return 0; + + cpu_set(cpu, nohz_cpu_mask); + smp_mb(); + if (rcu_needs_cpu(cpu) || local_softirq_pending() || + (next = next_timer_interrupt(), time_before_eq(next, jiffies))) { + cpu_clear(cpu, nohz_cpu_mask); + next = jiffies; + idle = 0; + } else + idle = 1; + + /* Convert jiffies to the real cycle counter. */ + do { + seq = read_seqbegin(&xtime_lock); + real_cycles_expiry = real_cycles_accounted_system + + (long)(next - jiffies) * cycles_per_jiffy; + } while (read_seqretry(&xtime_lock, seq)); + + /* This cpu is going idle. Disable the periodic alarm. */ + if (idle) { + vmi_timer_ops.cancel_alarm(VMI_CYCLES_AVAILABLE); + per_cpu(idle_start_jiffies, cpu) = jiffies; + } + + /* Set the real time alarm to expire at the next event. */ + vmi_timer_ops.set_alarm( + VMI_ALARM_WIRING | VMI_ALARM_IS_ONESHOT | VMI_CYCLES_REAL, + real_cycles_expiry, 0); + + return idle; +} + +static void vmi_reenable_hz_timer(int cpu) +{ + /* For /proc/vmi/info idle_hz stat. */ + per_cpu(vmi_idle_no_hz_jiffies, cpu) += jiffies - per_cpu(idle_start_jiffies, cpu); + per_cpu(vmi_idle_no_hz_irqs, cpu)++; + + /* Don't bother explicitly cancelling the one-shot alarm -- at + * worse we will receive a spurious timer interrupt. */ + vmi_timer_ops.set_alarm( + VMI_ALARM_WIRING | VMI_ALARM_IS_PERIODIC | VMI_CYCLES_AVAILABLE, + per_cpu(process_times_cycles_accounted_cpu, cpu) + cycles_per_alarm, + cycles_per_alarm); + /* Indicate this cpu is no longer nohz idle. */ + cpu_clear(cpu, nohz_cpu_mask); +} + +/* Called from interrupt handlers when (local) HZ timer is disabled. */ +void vmi_account_time_restart_hz_timer(void) +{ + unsigned long long cur_real_cycles, cur_process_times_cycles; + int cpu = smp_processor_id(); + + BUG_ON(!irqs_disabled()); + /* Account the time during which the HZ timer was disabled. */ + cur_real_cycles = read_real_cycles(); + cur_process_times_cycles = read_available_cycles(); + /* Update system wide (real) time state (xtime, jiffies). */ + vmi_account_real_cycles(cur_real_cycles); + /* Update per-cpu idle times. */ + vmi_account_no_hz_idle_cycles(cpu, cur_process_times_cycles); + /* Update time stolen from this cpu by the hypervisor. */ + vmi_account_stolen_cycles(cpu, cur_real_cycles, cur_process_times_cycles); + /* Reenable the hz timer. */ + vmi_reenable_hz_timer(cpu); +} + +#endif /* CONFIG_NO_IDLE_HZ */ + +/* UP (and no local-APIC) VMI-timer alarm interrupt handler. + * Handler for IRQ0. Not used when SMP or X86_LOCAL_APIC after + * APIC setup and setup_boot_vmi_alarm() is called. */ +static irqreturn_t vmi_timer_interrupt(int irq, void *dev_id) +{ + vmi_local_timer_interrupt(smp_processor_id()); + return IRQ_HANDLED; +} + +#ifdef CONFIG_X86_LOCAL_APIC + +/* SMP VMI-timer alarm interrupt handler. Handler for LVTT vector. + * Also used in UP when CONFIG_X86_LOCAL_APIC. + * The wrapper code is from arch/i386/kernel/apic.c#smp_apic_timer_interrupt. */ +void smp_apic_vmi_timer_interrupt(struct pt_regs *regs) +{ + struct pt_regs *old_regs = set_irq_regs(regs); + int cpu = smp_processor_id(); + + /* + * the NMI deadlock-detector uses this. + */ + per_cpu(irq_stat,cpu).apic_timer_irqs++; + + /* + * NOTE! We'd better ACK the irq immediately, + * because timer handling can be slow. + */ + ack_APIC_irq(); + + /* + * update_process_times() expects us to have done irq_enter(). + * Besides, if we don't timer interrupts ignore the global + * interrupt lock, which is the WrongThing (tm) to do. + */ + irq_enter(); + vmi_local_timer_interrupt(cpu); + irq_exit(); + set_irq_regs(old_regs); +} + +#endif /* CONFIG_X86_LOCAL_APIC */ -- cgit v1.2.3 From 7b3552024380f306a6c50d5105d18d9d4258fa4e Mon Sep 17 00:00:00 2001 From: Zachary Amsden Date: Tue, 13 Feb 2007 13:26:21 +0100 Subject: [PATCH] i386: Profile pc badness Profile_pc was broken when using paravirtualization because the assumption the kernel was running at CPL 0 was violated, causing bad logic to read a random value off the stack. The only way to be in kernel lock functions is to be in kernel code, so validate that assumption explicitly by checking the CS value. We don't want to be fooled by BIOS / APM segments and try to read those stacks, so only match KERNEL_CS. I moved some stuff in segment.h to make it prettier. Signed-off-by: Zachary Amsden Signed-off-by: Andi Kleen --- arch/i386/kernel/time.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/time.c b/arch/i386/kernel/time.c index 9603ccaba997..a4f67a6e6821 100644 --- a/arch/i386/kernel/time.c +++ b/arch/i386/kernel/time.c @@ -131,15 +131,13 @@ unsigned long profile_pc(struct pt_regs *regs) unsigned long pc = instruction_pointer(regs); #ifdef CONFIG_SMP - if (!user_mode_vm(regs) && in_lock_functions(pc)) { + if (!v8086_mode(regs) && SEGMENT_IS_KERNEL_CODE(regs->xcs) && + in_lock_functions(pc)) { #ifdef CONFIG_FRAME_POINTER return *(unsigned long *)(regs->ebp + 4); #else - unsigned long *sp; - if ((regs->xcs & 3) == 0) - sp = (unsigned long *)®s->esp; - else - sp = (unsigned long *)regs->esp; + unsigned long *sp = (unsigned long *)®s->esp; + /* Return address is either directly at stack pointer or above a saved eflags. Eflags has bits 22-31 zero, kernel addresses don't. */ -- cgit v1.2.3 From ac3b6faff961dd52fde71fb199ec3cf68ba35052 Mon Sep 17 00:00:00 2001 From: Zachary Amsden Date: Tue, 13 Feb 2007 13:26:21 +0100 Subject: [PATCH] i386: Kprobe rpl fix Kprobes bugfix for paravirt compatibility - RPL on the CS when inserting BPs must match running kernel. Signed-off-by: Zachary Amsden Signed-off-by: Andi Kleen CC: Eric Biederman --- arch/i386/kernel/kprobes.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/i386/kernel/kprobes.c b/arch/i386/kernel/kprobes.c index b85cfa3ce1dd..b545bc746fce 100644 --- a/arch/i386/kernel/kprobes.c +++ b/arch/i386/kernel/kprobes.c @@ -408,7 +408,7 @@ fastcall void *__kprobes trampoline_handler(struct pt_regs *regs) spin_lock_irqsave(&kretprobe_lock, flags); head = kretprobe_inst_table_head(current); /* fixup registers */ - regs->xcs = __KERNEL_CS; + regs->xcs = __KERNEL_CS | get_kernel_rpl(); regs->eip = trampoline_address; regs->orig_eax = 0xffffffff; -- cgit v1.2.3 From 90736e20e3805dd1ffff60e4750495944956cd44 Mon Sep 17 00:00:00 2001 From: Zachary Amsden Date: Tue, 13 Feb 2007 13:26:21 +0100 Subject: [PATCH] i386: Vmi timer race Because timer code moves around, and we might eventually move our init to a late_time_init hook, save and restore IRQs around this code because it is definitely not interrupt safe. Signed-off-by: Zachary Amsden Signed-off-by: Andi Kleen --- arch/i386/kernel/vmitime.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/i386/kernel/vmitime.c b/arch/i386/kernel/vmitime.c index 7c3033dbe5f5..2e2d8dbcbd68 100644 --- a/arch/i386/kernel/vmitime.c +++ b/arch/i386/kernel/vmitime.c @@ -180,7 +180,9 @@ unsigned long long vmi_sched_clock(void) void __init vmi_time_init(void) { unsigned long long cycles_per_sec, cycles_per_msec; + unsigned long flags; + local_irq_save(flags); setup_irq(0, &vmi_timer_irq); #ifdef CONFIG_X86_LOCAL_APIC set_intr_gate(LOCAL_TIMER_VECTOR, apic_vmi_timer_interrupt); @@ -224,6 +226,8 @@ void __init vmi_time_init(void) VMI_ALARM_WIRED_IRQ0 | VMI_ALARM_IS_PERIODIC | VMI_CYCLES_AVAILABLE, per_cpu(process_times_cycles_accounted_cpu, 0) + cycles_per_alarm, cycles_per_alarm); + + local_irq_restore(flags); } #ifdef CONFIG_X86_LOCAL_APIC -- cgit v1.2.3 From 7c0b49f9d1d59b3638c884b346a92dcb4ea1560a Mon Sep 17 00:00:00 2001 From: Zachary Amsden Date: Tue, 13 Feb 2007 13:26:22 +0100 Subject: [PATCH] i386: Paravirt debug defaults off Deliberate register clobber around performance critical inline code is great for testing, bad to leave on by default. Many people ship with DEBUG_KERNEL turned on, so stop making DEBUG_PARAVIRT default on. Signed-off-by: Zachary Amsden Signed-off-by: Andi Kleen --- arch/i386/Kconfig.debug | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/i386/Kconfig.debug b/arch/i386/Kconfig.debug index f68cc6f215f8..458bc1611933 100644 --- a/arch/i386/Kconfig.debug +++ b/arch/i386/Kconfig.debug @@ -87,7 +87,7 @@ config DOUBLEFAULT config DEBUG_PARAVIRT bool "Enable some paravirtualization debugging" - default y + default n depends on PARAVIRT && DEBUG_KERNEL help Currently deliberately clobbers regs which are allowed to be -- cgit v1.2.3 From f8657e1b55901e6c227094258d1fa3642fa242bd Mon Sep 17 00:00:00 2001 From: Vivek Goyal Date: Tue, 13 Feb 2007 13:26:22 +0100 Subject: [PATCH] i386: move startup_32() in text.head section o Entry startup_32 was in .text section but it was accessing some init data too and it prompts MODPOST to generate compilation warnings. WARNING: vmlinux - Section mismatch: reference to .init.data:boot_params from .text between '_text' (at offset 0xc0100029) and 'startup_32_smp' WARNING: vmlinux - Section mismatch: reference to .init.data:boot_params from .text between '_text' (at offset 0xc0100037) and 'startup_32_smp' WARNING: vmlinux - Section mismatch: reference to .init.data:init_pg_tables_end from .text between '_text' (at offset 0xc0100099) and 'startup_32_smp' o Can't move startup_32 to .init.text as this entry point has to be at the start of bzImage. Hence moved startup_32 to a new section .text.head and instructed MODPOST to not to generate warnings if init data is being accessed from .text.head section. This code has been audited. o SMP boot up code (startup_32_smp) can go into .init.text if CPU hotplug is not supported. Otherwise it generates more warnings WARNING: vmlinux - Section mismatch: reference to .init.data:new_cpu_data from .text between 'checkCPUtype' (at offset 0xc0100126) and 'is486' WARNING: vmlinux - Section mismatch: reference to .init.data:new_cpu_data from .text between 'checkCPUtype' (at offset 0xc0100130) and 'is486' Signed-off-by: Vivek Goyal Signed-off-by: Andrew Morton Signed-off-by: Andi Kleen --- arch/i386/kernel/head.S | 17 ++++++++++++++--- arch/i386/kernel/vmlinux.lds.S | 7 ++++++- 2 files changed, 20 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/head.S b/arch/i386/kernel/head.S index 6c7f71176977..734be5572eb9 100644 --- a/arch/i386/kernel/head.S +++ b/arch/i386/kernel/head.S @@ -53,6 +53,7 @@ * any particular GDT layout, because we load our own as soon as we * can. */ +.section .text.head,"ax",@progbits ENTRY(startup_32) #ifdef CONFIG_PARAVIRT @@ -141,16 +142,25 @@ page_pde_offset = (__PAGE_OFFSET >> 20); jb 10b movl %edi,(init_pg_tables_end - __PAGE_OFFSET) -#ifdef CONFIG_SMP xorl %ebx,%ebx /* This is the boot CPU (BSP) */ jmp 3f - /* * Non-boot CPU entry point; entered from trampoline.S * We can't lgdt here, because lgdt itself uses a data segment, but * we know the trampoline has already loaded the boot_gdt_table GDT * for us. + * + * If cpu hotplug is not supported then this code can go in init section + * which will be freed later */ + +#ifdef CONFIG_HOTPLUG_CPU +.section .text,"ax",@progbits +#else +.section .init.text,"ax",@progbits +#endif + +#ifdef CONFIG_SMP ENTRY(startup_32_smp) cld movl $(__BOOT_DS),%eax @@ -208,8 +218,8 @@ ENTRY(startup_32_smp) xorl %ebx,%ebx incl %ebx -3: #endif /* CONFIG_SMP */ +3: /* * Enable paging @@ -492,6 +502,7 @@ ignore_int: #endif iret +.section .text #ifdef CONFIG_PARAVIRT startup_paravirt: cld diff --git a/arch/i386/kernel/vmlinux.lds.S b/arch/i386/kernel/vmlinux.lds.S index 5038a73d554e..ca51610955df 100644 --- a/arch/i386/kernel/vmlinux.lds.S +++ b/arch/i386/kernel/vmlinux.lds.S @@ -37,9 +37,14 @@ SECTIONS { . = LOAD_OFFSET + LOAD_PHYSICAL_ADDR; phys_startup_32 = startup_32 - LOAD_OFFSET; + + .text.head : AT(ADDR(.text.head) - LOAD_OFFSET) { + _text = .; /* Text and read-only data */ + *(.text.head) + } :text = 0x9090 + /* read-only */ .text : AT(ADDR(.text) - LOAD_OFFSET) { - _text = .; /* Text and read-only data */ *(.text) SCHED_TEXT LOCK_TEXT -- cgit v1.2.3 From 86a978837ca739842317c4cf433de36aeb85ea3b Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 13 Feb 2007 13:26:22 +0100 Subject: [PATCH] i386: arch/i386/kernel/cpu/mcheck/mce.c should #include Every file should include the headers containing the prototypes for it's global functions. Signed-off-by: Adrian Bunk Signed-off-by: Andrew Morton Signed-off-by: Andi Kleen --- arch/i386/kernel/cpu/mcheck/mce.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/i386/kernel/cpu/mcheck/mce.c b/arch/i386/kernel/cpu/mcheck/mce.c index d555bec0db99..4f10c62d180c 100644 --- a/arch/i386/kernel/cpu/mcheck/mce.c +++ b/arch/i386/kernel/cpu/mcheck/mce.c @@ -12,6 +12,7 @@ #include #include +#include #include "mce.h" -- cgit v1.2.3 From 2ff2d3d74705d34ab71b21f54634fcf50d57bdd5 Mon Sep 17 00:00:00 2001 From: Stephane Eranian Date: Tue, 13 Feb 2007 13:26:22 +0100 Subject: [PATCH] i386: add idle notifier Add a notifier mechanism to the low level idle loop. You can register a callback function which gets invoked on entry and exit from the low level idle loop. The low level idle loop is defined as the polling loop, low-power call, or the mwait instruction. Interrupts processed by the idle thread are not considered part of the low level loop. The notifier can be used to measure precisely how much is spent in useless execution (or low power mode). The perfmon subsystem uses it to turn on/off monitoring. Signed-off-by: stephane eranian Signed-off-by: Andrew Morton Signed-off-by: Andi Kleen --- arch/i386/kernel/apic.c | 4 +++ arch/i386/kernel/cpu/mcheck/p4.c | 2 ++ arch/i386/kernel/irq.c | 3 +++ arch/i386/kernel/process.c | 53 +++++++++++++++++++++++++++++++++++++++- arch/i386/kernel/smp.c | 2 ++ 5 files changed, 63 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/i386/kernel/apic.c b/arch/i386/kernel/apic.c index 629c5ed94260..f4159e0a7ae9 100644 --- a/arch/i386/kernel/apic.c +++ b/arch/i386/kernel/apic.c @@ -36,6 +36,7 @@ #include #include #include +#include #include #include @@ -1255,6 +1256,7 @@ fastcall void smp_apic_timer_interrupt(struct pt_regs *regs) * Besides, if we don't timer interrupts ignore the global * interrupt lock, which is the WrongThing (tm) to do. */ + exit_idle(); irq_enter(); smp_local_timer_interrupt(); irq_exit(); @@ -1305,6 +1307,7 @@ fastcall void smp_spurious_interrupt(struct pt_regs *regs) { unsigned long v; + exit_idle(); irq_enter(); /* * Check if this really is a spurious interrupt and ACK it @@ -1329,6 +1332,7 @@ fastcall void smp_error_interrupt(struct pt_regs *regs) { unsigned long v, v1; + exit_idle(); irq_enter(); /* First tickle the hardware, only then report what went on. -- REW */ v = apic_read(APIC_ESR); diff --git a/arch/i386/kernel/cpu/mcheck/p4.c b/arch/i386/kernel/cpu/mcheck/p4.c index 504434a46011..8359c19d3a23 100644 --- a/arch/i386/kernel/cpu/mcheck/p4.c +++ b/arch/i386/kernel/cpu/mcheck/p4.c @@ -12,6 +12,7 @@ #include #include #include +#include #include @@ -59,6 +60,7 @@ static void (*vendor_thermal_interrupt)(struct pt_regs *regs) = unexpected_therm fastcall void smp_thermal_interrupt(struct pt_regs *regs) { + exit_idle(); irq_enter(); vendor_thermal_interrupt(regs); irq_exit(); diff --git a/arch/i386/kernel/irq.c b/arch/i386/kernel/irq.c index 3201d421090a..5785d84103a6 100644 --- a/arch/i386/kernel/irq.c +++ b/arch/i386/kernel/irq.c @@ -19,6 +19,8 @@ #include #include +#include + DEFINE_PER_CPU(irq_cpustat_t, irq_stat) ____cacheline_internodealigned_in_smp; EXPORT_PER_CPU_SYMBOL(irq_stat); @@ -61,6 +63,7 @@ fastcall unsigned int do_IRQ(struct pt_regs *regs) union irq_ctx *curctx, *irqctx; u32 *isp; #endif + exit_idle(); if (unlikely((unsigned)irq >= NR_IRQS)) { printk(KERN_EMERG "%s: cannot handle IRQ %d\n", diff --git a/arch/i386/kernel/process.c b/arch/i386/kernel/process.c index 05be77413351..7845d480c293 100644 --- a/arch/i386/kernel/process.c +++ b/arch/i386/kernel/process.c @@ -48,6 +48,7 @@ #include #include #include +#include #ifdef CONFIG_MATH_EMULATION #include #endif @@ -80,6 +81,42 @@ void (*pm_idle)(void); EXPORT_SYMBOL(pm_idle); static DEFINE_PER_CPU(unsigned int, cpu_idle_state); +static ATOMIC_NOTIFIER_HEAD(idle_notifier); + +void idle_notifier_register(struct notifier_block *n) +{ + atomic_notifier_chain_register(&idle_notifier, n); +} + +void idle_notifier_unregister(struct notifier_block *n) +{ + atomic_notifier_chain_unregister(&idle_notifier, n); +} + +static DEFINE_PER_CPU(volatile unsigned long, idle_state); + +void enter_idle(void) +{ + /* needs to be atomic w.r.t. interrupts, not against other CPUs */ + __set_bit(0, &__get_cpu_var(idle_state)); + atomic_notifier_call_chain(&idle_notifier, IDLE_START, NULL); +} + +static void __exit_idle(void) +{ + /* needs to be atomic w.r.t. interrupts, not against other CPUs */ + if (__test_and_clear_bit(0, &__get_cpu_var(idle_state)) == 0) + return; + atomic_notifier_call_chain(&idle_notifier, IDLE_END, NULL); +} + +void exit_idle(void) +{ + if (current->pid) + return; + __exit_idle(); +} + void disable_hlt(void) { hlt_counter++; @@ -130,6 +167,7 @@ EXPORT_SYMBOL(default_idle); */ static void poll_idle (void) { + local_irq_enable(); cpu_relax(); } @@ -189,7 +227,16 @@ void cpu_idle(void) play_dead(); __get_cpu_var(irq_stat).idle_timestamp = jiffies; + + /* + * Idle routines should keep interrupts disabled + * from here on, until they go to idle. + * Otherwise, idle callbacks can misfire. + */ + local_irq_disable(); + enter_idle(); idle(); + __exit_idle(); } preempt_enable_no_resched(); schedule(); @@ -243,7 +290,11 @@ void mwait_idle_with_hints(unsigned long eax, unsigned long ecx) __monitor((void *)¤t_thread_info()->flags, 0, 0); smp_mb(); if (!need_resched()) - __mwait(eax, ecx); + __sti_mwait(eax, ecx); + else + local_irq_enable(); + } else { + local_irq_enable(); } } diff --git a/arch/i386/kernel/smp.c b/arch/i386/kernel/smp.c index 5285aff8367f..ffc4f65c5189 100644 --- a/arch/i386/kernel/smp.c +++ b/arch/i386/kernel/smp.c @@ -23,6 +23,7 @@ #include #include +#include #include /* @@ -624,6 +625,7 @@ fastcall void smp_call_function_interrupt(struct pt_regs *regs) /* * At this point the info structure may be out of scope unless wait==1 */ + exit_idle(); irq_enter(); (*func)(info); irq_exit(); -- cgit v1.2.3 From f9690982b8c2f9a2c65acdc113e758ec356676a3 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Tue, 13 Feb 2007 13:26:22 +0100 Subject: [PATCH] i386: improve sched_clock() on i686 Clean up sched_clock() on i686: it will use the TSC if available and falls back to jiffies only if the user asked for it to be disabled via notsc or the CPU calibration code didnt figure out the right cpu_khz. This generally makes the scheduler timestamps more finegrained, on all hardware. (the current scheduler is pretty resistant against asynchronous sched_clock() values on different CPUs, it will allow at most up to a jiffy of jitter.) Also simplify sched_clock()'s check for TSC availability: propagate the desire and ability to use the TSC into the tsc_disable flag, previously this flag only indicated whether the notsc option was passed. This makes the rare low-res sched_clock() codepath a single branch off a read-mostly flag. Signed-off-by: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Andi Kleen --- arch/i386/kernel/tsc.c | 22 ++++++++++++++-------- 1 file changed, 14 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/tsc.c b/arch/i386/kernel/tsc.c index 12fef14995a5..46f752a8bbf3 100644 --- a/arch/i386/kernel/tsc.c +++ b/arch/i386/kernel/tsc.c @@ -112,13 +112,10 @@ unsigned long long sched_clock(void) return (*custom_sched_clock)(); /* - * in the NUMA case we dont use the TSC as they are not - * synchronized across all CPUs. + * Fall back to jiffies if there's no TSC available: */ -#ifndef CONFIG_NUMA - if (!cpu_khz || check_tsc_unstable()) -#endif - /* no locking but a rare wrong value is not a big deal */ + if (unlikely(tsc_disable)) + /* No locking but a rare wrong value is not a big deal: */ return (jiffies_64 - INITIAL_JIFFIES) * (1000000000 / HZ); /* read the Time Stamp Counter: */ @@ -198,13 +195,13 @@ EXPORT_SYMBOL(recalibrate_cpu_khz); void __init tsc_init(void) { if (!cpu_has_tsc || tsc_disable) - return; + goto out_no_tsc; cpu_khz = calculate_cpu_khz(); tsc_khz = cpu_khz; if (!cpu_khz) - return; + goto out_no_tsc; printk("Detected %lu.%03lu MHz processor.\n", (unsigned long)cpu_khz / 1000, @@ -212,6 +209,15 @@ void __init tsc_init(void) set_cyc2ns_scale(cpu_khz); use_tsc_delay(); + return; + +out_no_tsc: + /* + * Set the tsc_disable flag if there's no TSC support, this + * makes it a fast flag for the kernel to see whether it + * should be using the TSC. + */ + tsc_disable = 1; } #ifdef CONFIG_CPU_FREQ -- cgit v1.2.3 From 3b3d5e1db66cd66148b2cebd2c38aff2a8df03d6 Mon Sep 17 00:00:00 2001 From: Rene Herman Date: Tue, 13 Feb 2007 13:26:22 +0100 Subject: [PATCH] i386: romsignature/checksum cleanup Use adding __init to romsignature() (it's only called from probe_roms() which is itself __init) as an excuse to submit a pedantic cleanup. Signed-off-by: Rene Herman Signed-off-by: Andi Kleen Cc: Andi Kleen Signed-off-by: Andrew Morton --- arch/i386/kernel/e820.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/e820.c b/arch/i386/kernel/e820.c index 9ded1e49119e..70f39560846a 100644 --- a/arch/i386/kernel/e820.c +++ b/arch/i386/kernel/e820.c @@ -157,21 +157,22 @@ static struct resource standard_io_resources[] = { { .flags = IORESOURCE_BUSY | IORESOURCE_IO } }; -static int romsignature(const unsigned char *x) +#define ROMSIGNATURE 0xaa55 + +static int __init romsignature(const unsigned char *rom) { unsigned short sig; - int ret = 0; - if (probe_kernel_address((const unsigned short *)x, sig) == 0) - ret = (sig == 0xaa55); - return ret; + + return probe_kernel_address((const unsigned short *)rom, sig) == 0 && + sig == ROMSIGNATURE; } static int __init romchecksum(unsigned char *rom, unsigned long length) { - unsigned char *p, sum = 0; + unsigned char sum; - for (p = rom; p < rom + length; p++) - sum += *p; + for (sum = 0; length; length--) + sum += *rom++; return sum == 0; } -- cgit v1.2.3 From 53fee04f318222a3179ca5933d8bda82c1eef17a Mon Sep 17 00:00:00 2001 From: Rohit Seth Date: Tue, 13 Feb 2007 13:26:22 +0100 Subject: [PATCH] x86-64: Fix fake numa for x86_64 machines with big IO hole This patch resolves the issue of running with numa=fake=X on kernel command line on x86_64 machines that have big IO hole. While calculating the size of each node now we look at the total hole size in that range. Previously there were nodes that only had IO holes in them causing kernel boot problems. We now use the NODE_MIN_SIZE (64MB) as the minimum size of memory that any node must have. We reduce the number of allocated nodes if the number of nodes specified on kernel command line results in any node getting memory smaller than NODE_MIN_SIZE. This change allows the extra memory to be incremented in NODE_MIN_SIZE granule and uniformly distribute among as many nodes (called big nodes) as possible. [akpm@osdl.org: build fix] Signed-off-by: David Rientjes Signed-off-by: Paul Menage Signed-off-by: Rohit Seth Signed-off-by: Andi Kleen Cc: Andi Kleen Signed-off-by: Andrew Morton --- arch/x86_64/kernel/e820.c | 31 +++++++++++++ arch/x86_64/mm/numa.c | 110 ++++++++++++++++++++++++++++++++++++++++------ 2 files changed, 127 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/e820.c b/arch/x86_64/kernel/e820.c index 9d67955bbc31..4651fd22b213 100644 --- a/arch/x86_64/kernel/e820.c +++ b/arch/x86_64/kernel/e820.c @@ -190,6 +190,37 @@ unsigned long __init e820_end_of_ram(void) return end_pfn; } +/* + * Find the hole size in the range. + */ +unsigned long __init e820_hole_size(unsigned long start, unsigned long end) +{ + unsigned long ram = 0; + int i; + + for (i = 0; i < e820.nr_map; i++) { + struct e820entry *ei = &e820.map[i]; + unsigned long last, addr; + + if (ei->type != E820_RAM || + ei->addr+ei->size <= start || + ei->addr >= end) + continue; + + addr = round_up(ei->addr, PAGE_SIZE); + if (addr < start) + addr = start; + + last = round_down(ei->addr + ei->size, PAGE_SIZE); + if (last >= end) + last = end; + + if (last > addr) + ram += last - addr; + } + return ((end - start) - ram); +} + /* * Mark e820 reserved areas as busy for the resource manager. */ diff --git a/arch/x86_64/mm/numa.c b/arch/x86_64/mm/numa.c index 1ec16ea97519..d3f747dd61d3 100644 --- a/arch/x86_64/mm/numa.c +++ b/arch/x86_64/mm/numa.c @@ -272,31 +272,113 @@ void __init numa_init_array(void) } #ifdef CONFIG_NUMA_EMU +/* Numa emulation */ int numa_fake __initdata = 0; -/* Numa emulation */ +/* + * This function is used to find out if the start and end correspond to + * different zones. + */ +int zone_cross_over(unsigned long start, unsigned long end) +{ + if ((start < (MAX_DMA32_PFN << PAGE_SHIFT)) && + (end >= (MAX_DMA32_PFN << PAGE_SHIFT))) + return 1; + return 0; +} + static int __init numa_emulation(unsigned long start_pfn, unsigned long end_pfn) { - int i; + int i, big; struct bootnode nodes[MAX_NUMNODES]; - unsigned long sz = ((end_pfn - start_pfn)< 1) { - unsigned long x = 1; - while ((x << 1) < sz) - x <<= 1; - if (x < sz/2) - printk(KERN_ERR "Numa emulation unbalanced. Complain to maintainer\n"); - sz = x; - } + old_sz = sz; + /* + * Round down to the nearest FAKE_NODE_MIN_SIZE. + */ + sz &= FAKE_NODE_MIN_HASH_MASK; + + /* + * We ensure that each node is at least 64MB big. Smaller than this + * size can cause VM hiccups. + */ + if (sz == 0) { + printk(KERN_INFO "Not enough memory for %d nodes. Reducing " + "the number of nodes\n", numa_fake); + numa_fake = (max_addr - start - hole_size) / FAKE_NODE_MIN_SIZE; + printk(KERN_INFO "Number of fake nodes will be = %d\n", + numa_fake); + sz = FAKE_NODE_MIN_SIZE; + } + /* + * Find out how many nodes can get an extra NODE_MIN_SIZE granule. + * This logic ensures the extra memory gets distributed among as many + * nodes as possible (as compared to one single node getting all that + * extra memory. + */ + big = ((old_sz - sz) * numa_fake) / FAKE_NODE_MIN_SIZE; + printk(KERN_INFO "Fake node Size: %luMB hole_size: %luMB big nodes: " + "%d\n", + (sz >> 20), (hole_size >> 20), big); memset(&nodes,0,sizeof(nodes)); + end = start; for (i = 0; i < numa_fake; i++) { - nodes[i].start = (start_pfn<= max_addr) { + numa_fake = i - 1; + break; + } + start = nodes[i].start = end; + /* + * Final node can have all the remaining memory. + */ if (i == numa_fake-1) - sz = (end_pfn<= max_addr) + break; + } + /* + * Look at the next node to make sure there is some real memory + * to map. Bad things happen when the only memory present + * in a zone on a fake node is IO hole. + */ + while (e820_hole_size(end, end + FAKE_NODE_MIN_SIZE) > 0) { + if (zone_cross_over(start, end + sz)) { + end = (MAX_DMA32_PFN << PAGE_SHIFT); + break; + } + if (end >= max_addr) + break; + end += FAKE_NODE_MIN_SIZE; + } + if (end > max_addr) + end = max_addr; + nodes[i].end = end; printk(KERN_INFO "Faking node %d at %016Lx-%016Lx (%LuMB)\n", i, nodes[i].start, nodes[i].end, -- cgit v1.2.3 From c49c5330c9592f29a69bb2ea8f6e7fd5d9c151e8 Mon Sep 17 00:00:00 2001 From: Glauber de Oliveira Costa Date: Tue, 13 Feb 2007 13:26:22 +0100 Subject: [PATCH] x86-64: Remove fastcall references in x86_64 code Unlike x86, x86_64 already passes arguments in registers. The use of regparm attribute makes no difference in produced code, and the use of fastcall just bloats the code. Signed-off-by: Glauber de Oliveira Costa Signed-off-by: Andi Kleen Cc: Andi Kleen Signed-off-by: Andrew Morton --- arch/x86_64/kernel/acpi/sleep.c | 2 +- arch/x86_64/kernel/x8664_ksyms.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/acpi/sleep.c b/arch/x86_64/kernel/acpi/sleep.c index 5ebf62c7a3d2..23178ce6c783 100644 --- a/arch/x86_64/kernel/acpi/sleep.c +++ b/arch/x86_64/kernel/acpi/sleep.c @@ -58,7 +58,7 @@ unsigned long acpi_wakeup_address = 0; unsigned long acpi_video_flags; extern char wakeup_start, wakeup_end; -extern unsigned long FASTCALL(acpi_copy_wakeup_routine(unsigned long)); +extern unsigned long acpi_copy_wakeup_routine(unsigned long); static pgd_t low_ptr; diff --git a/arch/x86_64/kernel/x8664_ksyms.c b/arch/x86_64/kernel/x8664_ksyms.c index 23a7da312f30..0dffae69f4ad 100644 --- a/arch/x86_64/kernel/x8664_ksyms.c +++ b/arch/x86_64/kernel/x8664_ksyms.c @@ -35,8 +35,8 @@ EXPORT_SYMBOL(copy_page); EXPORT_SYMBOL(clear_page); #ifdef CONFIG_SMP -extern void FASTCALL( __write_lock_failed(rwlock_t *rw)); -extern void FASTCALL( __read_lock_failed(rwlock_t *rw)); +extern void __write_lock_failed(rwlock_t *rw); +extern void __read_lock_failed(rwlock_t *rw); EXPORT_SYMBOL(__write_lock_failed); EXPORT_SYMBOL(__read_lock_failed); #endif -- cgit v1.2.3 From 4c3cbf75b262433afc90b5c35510d1e5744d3b94 Mon Sep 17 00:00:00 2001 From: Glauber de Oliveira Costa Date: Tue, 13 Feb 2007 13:26:22 +0100 Subject: [PATCH] x86-64: Use constant instead of raw number in x86_64 ioperm.c This is a tiny cleanup to increase readability Signed-off-by: Glauber de Oliveira Costa Signed-off-by: Andi Kleen Cc: Andi Kleen Signed-off-by: Andrew Morton --- arch/x86_64/kernel/ioport.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/ioport.c b/arch/x86_64/kernel/ioport.c index fe063d3cfe42..745b1f0f494e 100644 --- a/arch/x86_64/kernel/ioport.c +++ b/arch/x86_64/kernel/ioport.c @@ -114,6 +114,6 @@ asmlinkage long sys_iopl(unsigned int level, struct pt_regs *regs) if (!capable(CAP_SYS_RAWIO)) return -EPERM; } - regs->eflags = (regs->eflags &~ 0x3000UL) | (level << 12); + regs->eflags = (regs->eflags &~ X86_EFLAGS_IOPL) | (level << 12); return 0; } -- cgit v1.2.3 From 1676193937a538fdb92a2916a86a705093cfd613 Mon Sep 17 00:00:00 2001 From: Venkatesh Pallipadi Date: Tue, 13 Feb 2007 13:26:22 +0100 Subject: [PATCH] x86-64: Handle 32 bit PerfMon Counter writes cleanly in x86_64 nmi_watchdog P6 CPUs and Core/Core 2 CPUs which has 'architectural perf mon' feature, only supports write of low 32 bits in Performance Monitoring Counters. Bits 32..39 are sign extended based on bit 31 and bits 40..63 are reserved and should be zero. This patch: Change x86_64 nmi handler to handle this case cleanly. Signed-off-by: Venkatesh Pallipadi Signed-off-by: Andi Kleen --- arch/x86_64/kernel/nmi.c | 46 ++++++++++++++++++++++++++++++++-------------- 1 file changed, 32 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/nmi.c b/arch/x86_64/kernel/nmi.c index 9cb42ecb7f89..e59cda134166 100644 --- a/arch/x86_64/kernel/nmi.c +++ b/arch/x86_64/kernel/nmi.c @@ -214,6 +214,23 @@ static __init void nmi_cpu_busy(void *data) } #endif +static unsigned int adjust_for_32bit_ctr(unsigned int hz) +{ + unsigned int retval = hz; + + /* + * On Intel CPUs with ARCH_PERFMON only 32 bits in the counter + * are writable, with higher bits sign extending from bit 31. + * So, we can only program the counter with 31 bit values and + * 32nd bit should be 1, for 33.. to be 1. + * Find the appropriate nmi_hz + */ + if ((((u64)cpu_khz * 1000) / retval) > 0x7fffffffULL) { + retval = ((u64)cpu_khz * 1000) / 0x7fffffffUL + 1; + } + return retval; +} + int __init check_nmi_watchdog (void) { int *counts; @@ -268,17 +285,8 @@ int __init check_nmi_watchdog (void) struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); nmi_hz = 1; - /* - * On Intel CPUs with ARCH_PERFMON only 32 bits in the counter - * are writable, with higher bits sign extending from bit 31. - * So, we can only program the counter with 31 bit values and - * 32nd bit should be 1, for 33.. to be 1. - * Find the appropriate nmi_hz - */ - if (wd->perfctr_msr == MSR_ARCH_PERFMON_PERFCTR0 && - ((u64)cpu_khz * 1000) > 0x7fffffffULL) { - nmi_hz = ((u64)cpu_khz * 1000) / 0x7fffffffUL + 1; - } + if (wd->perfctr_msr == MSR_ARCH_PERFMON_PERFCTR0) + nmi_hz = adjust_for_32bit_ctr(nmi_hz); } kfree(counts); @@ -634,7 +642,9 @@ static int setup_intel_arch_watchdog(void) /* setup the timer */ wrmsr(evntsel_msr, evntsel, 0); - wrmsrl(perfctr_msr, -((u64)cpu_khz * 1000 / nmi_hz)); + + nmi_hz = adjust_for_32bit_ctr(nmi_hz); + wrmsr(perfctr_msr, (u32)(-((u64)cpu_khz * 1000 / nmi_hz)), 0); apic_write(APIC_LVTPC, APIC_DM_NMI); evntsel |= ARCH_PERFMON_EVENTSEL0_ENABLE; @@ -855,15 +865,23 @@ int __kprobes nmi_watchdog_tick(struct pt_regs * regs, unsigned reason) dummy &= ~P4_CCCR_OVF; wrmsrl(wd->cccr_msr, dummy); apic_write(APIC_LVTPC, APIC_DM_NMI); + /* start the cycle over again */ + wrmsrl(wd->perfctr_msr, + -((u64)cpu_khz * 1000 / nmi_hz)); } else if (wd->perfctr_msr == MSR_ARCH_PERFMON_PERFCTR0) { /* * ArchPerfom/Core Duo needs to re-unmask * the apic vector */ apic_write(APIC_LVTPC, APIC_DM_NMI); + /* ARCH_PERFMON has 32 bit counter writes */ + wrmsr(wd->perfctr_msr, + (u32)(-((u64)cpu_khz * 1000 / nmi_hz)), 0); + } else { + /* start the cycle over again */ + wrmsrl(wd->perfctr_msr, + -((u64)cpu_khz * 1000 / nmi_hz)); } - /* start the cycle over again */ - wrmsrl(wd->perfctr_msr, -((u64)cpu_khz * 1000 / nmi_hz)); rc = 1; } else if (nmi_watchdog == NMI_IO_APIC) { /* don't know how to accurately check for this. -- cgit v1.2.3 From 90ce4bc4542c10b63dc6482ac920ff1226a6e5ff Mon Sep 17 00:00:00 2001 From: Venkatesh Pallipadi Date: Tue, 13 Feb 2007 13:26:22 +0100 Subject: [PATCH] i386: Handle 32 bit PerfMon Counter writes cleanly in i386 nmi_watchdog Change i386 nmi handler to handle 32 bit perfmon counter MSR writes cleanly. Signed-off-by: Venkatesh Pallipadi Signed-off-by: Andi Kleen --- arch/i386/kernel/nmi.c | 64 +++++++++++++++++++++++++++++++++++++------------- 1 file changed, 48 insertions(+), 16 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/nmi.c b/arch/i386/kernel/nmi.c index 1a6f8bb8881c..7d3f4e22d6fb 100644 --- a/arch/i386/kernel/nmi.c +++ b/arch/i386/kernel/nmi.c @@ -216,6 +216,28 @@ static __init void nmi_cpu_busy(void *data) } #endif +static unsigned int adjust_for_32bit_ctr(unsigned int hz) +{ + u64 counter_val; + unsigned int retval = hz; + + /* + * On Intel CPUs with P6/ARCH_PERFMON only 32 bits in the counter + * are writable, with higher bits sign extending from bit 31. + * So, we can only program the counter with 31 bit values and + * 32nd bit should be 1, for 33.. to be 1. + * Find the appropriate nmi_hz + */ + counter_val = (u64)cpu_khz * 1000; + do_div(counter_val, retval); + if (counter_val > 0x7fffffffULL) { + u64 count = (u64)cpu_khz * 1000; + do_div(count, 0x7fffffffUL); + retval = count + 1; + } + return retval; +} + static int __init check_nmi_watchdog(void) { unsigned int *prev_nmi_count; @@ -281,18 +303,10 @@ static int __init check_nmi_watchdog(void) struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); nmi_hz = 1; - /* - * On Intel CPUs with ARCH_PERFMON only 32 bits in the counter - * are writable, with higher bits sign extending from bit 31. - * So, we can only program the counter with 31 bit values and - * 32nd bit should be 1, for 33.. to be 1. - * Find the appropriate nmi_hz - */ - if (wd->perfctr_msr == MSR_ARCH_PERFMON_PERFCTR0 && - ((u64)cpu_khz * 1000) > 0x7fffffffULL) { - u64 count = (u64)cpu_khz * 1000; - do_div(count, 0x7fffffffUL); - nmi_hz = count + 1; + + if (wd->perfctr_msr == MSR_P6_PERFCTR0 || + wd->perfctr_msr == MSR_ARCH_PERFMON_PERFCTR0) { + nmi_hz = adjust_for_32bit_ctr(nmi_hz); } } @@ -442,6 +456,17 @@ static void write_watchdog_counter(unsigned int perfctr_msr, const char *descr) wrmsrl(perfctr_msr, 0 - count); } +static void write_watchdog_counter32(unsigned int perfctr_msr, + const char *descr) +{ + u64 count = (u64)cpu_khz * 1000; + + do_div(count, nmi_hz); + if(descr) + Dprintk("setting %s to -0x%08Lx\n", descr, count); + wrmsr(perfctr_msr, (u32)(-count), 0); +} + /* Note that these events don't tick when the CPU idles. This means the frequency varies with CPU load. */ @@ -531,7 +556,8 @@ static int setup_p6_watchdog(void) /* setup the timer */ wrmsr(evntsel_msr, evntsel, 0); - write_watchdog_counter(perfctr_msr, "P6_PERFCTR0"); + nmi_hz = adjust_for_32bit_ctr(nmi_hz); + write_watchdog_counter32(perfctr_msr, "P6_PERFCTR0"); apic_write(APIC_LVTPC, APIC_DM_NMI); evntsel |= P6_EVNTSEL0_ENABLE; wrmsr(evntsel_msr, evntsel, 0); @@ -704,7 +730,8 @@ static int setup_intel_arch_watchdog(void) /* setup the timer */ wrmsr(evntsel_msr, evntsel, 0); - write_watchdog_counter(perfctr_msr, "INTEL_ARCH_PERFCTR0"); + nmi_hz = adjust_for_32bit_ctr(nmi_hz); + write_watchdog_counter32(perfctr_msr, "INTEL_ARCH_PERFCTR0"); apic_write(APIC_LVTPC, APIC_DM_NMI); evntsel |= ARCH_PERFMON_EVENTSEL0_ENABLE; wrmsr(evntsel_msr, evntsel, 0); @@ -956,6 +983,8 @@ __kprobes int nmi_watchdog_tick(struct pt_regs * regs, unsigned reason) dummy &= ~P4_CCCR_OVF; wrmsrl(wd->cccr_msr, dummy); apic_write(APIC_LVTPC, APIC_DM_NMI); + /* start the cycle over again */ + write_watchdog_counter(wd->perfctr_msr, NULL); } else if (wd->perfctr_msr == MSR_P6_PERFCTR0 || wd->perfctr_msr == MSR_ARCH_PERFMON_PERFCTR0) { @@ -964,9 +993,12 @@ __kprobes int nmi_watchdog_tick(struct pt_regs * regs, unsigned reason) * other P6 variant. * ArchPerfom/Core Duo also needs this */ apic_write(APIC_LVTPC, APIC_DM_NMI); + /* P6/ARCH_PERFMON has 32 bit counter write */ + write_watchdog_counter32(wd->perfctr_msr, NULL); + } else { + /* start the cycle over again */ + write_watchdog_counter(wd->perfctr_msr, NULL); } - /* start the cycle over again */ - write_watchdog_counter(wd->perfctr_msr, NULL); rc = 1; } else if (nmi_watchdog == NMI_IO_APIC) { /* don't know how to accurately check for this. -- cgit v1.2.3 From 44264261d8fb87849118e41b2735bd95db28126f Mon Sep 17 00:00:00 2001 From: Venkatesh Pallipadi Date: Tue, 13 Feb 2007 13:26:23 +0100 Subject: [PATCH] i386: Handle 32 bit PerfMon Counter writes cleanly in oprofile Handle these 32 bit perfmon counter MSR writes cleanly in oprofile. Signed-off-by: Venkatesh Pallipadi Signed-off-by: Andi Kleen --- arch/i386/oprofile/op_model_ppro.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/i386/oprofile/op_model_ppro.c b/arch/i386/oprofile/op_model_ppro.c index ca2447e05e15..c554f52cb808 100644 --- a/arch/i386/oprofile/op_model_ppro.c +++ b/arch/i386/oprofile/op_model_ppro.c @@ -24,7 +24,8 @@ #define CTR_IS_RESERVED(msrs,c) (msrs->counters[(c)].addr ? 1 : 0) #define CTR_READ(l,h,msrs,c) do {rdmsr(msrs->counters[(c)].addr, (l), (h));} while (0) -#define CTR_WRITE(l,msrs,c) do {wrmsr(msrs->counters[(c)].addr, -(u32)(l), -1);} while (0) +#define CTR_32BIT_WRITE(l,msrs,c) \ + do {wrmsr(msrs->counters[(c)].addr, -(u32)(l), 0);} while (0) #define CTR_OVERFLOWED(n) (!((n) & (1U<<31))) #define CTRL_IS_RESERVED(msrs,c) (msrs->controls[(c)].addr ? 1 : 0) @@ -79,7 +80,7 @@ static void ppro_setup_ctrs(struct op_msrs const * const msrs) for (i = 0; i < NUM_COUNTERS; ++i) { if (unlikely(!CTR_IS_RESERVED(msrs,i))) continue; - CTR_WRITE(1, msrs, i); + CTR_32BIT_WRITE(1, msrs, i); } /* enable active counters */ @@ -87,7 +88,7 @@ static void ppro_setup_ctrs(struct op_msrs const * const msrs) if ((counter_config[i].enabled) && (CTR_IS_RESERVED(msrs,i))) { reset_value[i] = counter_config[i].count; - CTR_WRITE(counter_config[i].count, msrs, i); + CTR_32BIT_WRITE(counter_config[i].count, msrs, i); CTRL_READ(low, high, msrs, i); CTRL_CLEAR(low); @@ -116,7 +117,7 @@ static int ppro_check_ctrs(struct pt_regs * const regs, CTR_READ(low, high, msrs, i); if (CTR_OVERFLOWED(low)) { oprofile_add_sample(regs, i); - CTR_WRITE(reset_value[i], msrs, i); + CTR_32BIT_WRITE(reset_value[i], msrs, i); } } -- cgit v1.2.3 From 9b355897562fe2291248a7aec8e479c2c98cf117 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Tue, 13 Feb 2007 13:26:23 +0100 Subject: [PATCH] x86: simplify notify_page_fault() Remove all parameters from this function that aren't really variable. Signed-off-by: Jan Beulich Signed-off-by: Andi Kleen --- arch/i386/mm/fault.c | 18 ++++++++---------- arch/x86_64/mm/fault.c | 18 ++++++++---------- 2 files changed, 16 insertions(+), 20 deletions(-) (limited to 'arch') diff --git a/arch/i386/mm/fault.c b/arch/i386/mm/fault.c index cba9b3894a33..b8c4e259fc8b 100644 --- a/arch/i386/mm/fault.c +++ b/arch/i386/mm/fault.c @@ -46,17 +46,17 @@ int unregister_page_fault_notifier(struct notifier_block *nb) } EXPORT_SYMBOL_GPL(unregister_page_fault_notifier); -static inline int notify_page_fault(enum die_val val, const char *str, - struct pt_regs *regs, long err, int trap, int sig) +static inline int notify_page_fault(struct pt_regs *regs, long err) { struct die_args args = { .regs = regs, - .str = str, + .str = "page fault", .err = err, - .trapnr = trap, - .signr = sig + .trapnr = 14, + .signr = SIGSEGV }; - return atomic_notifier_call_chain(¬ify_page_fault_chain, val, &args); + return atomic_notifier_call_chain(¬ify_page_fault_chain, + DIE_PAGE_FAULT, &args); } /* @@ -327,8 +327,7 @@ fastcall void __kprobes do_page_fault(struct pt_regs *regs, if (unlikely(address >= TASK_SIZE)) { if (!(error_code & 0x0000000d) && vmalloc_fault(address) >= 0) return; - if (notify_page_fault(DIE_PAGE_FAULT, "page fault", regs, error_code, 14, - SIGSEGV) == NOTIFY_STOP) + if (notify_page_fault(regs, error_code) == NOTIFY_STOP) return; /* * Don't take the mm semaphore here. If we fixup a prefetch @@ -337,8 +336,7 @@ fastcall void __kprobes do_page_fault(struct pt_regs *regs, goto bad_area_nosemaphore; } - if (notify_page_fault(DIE_PAGE_FAULT, "page fault", regs, error_code, 14, - SIGSEGV) == NOTIFY_STOP) + if (notify_page_fault(regs, error_code) == NOTIFY_STOP) return; /* It's safe to allow irq's after cr2 has been saved and the vmalloc diff --git a/arch/x86_64/mm/fault.c b/arch/x86_64/mm/fault.c index 49e8cf2e06f8..6ada7231f3ab 100644 --- a/arch/x86_64/mm/fault.c +++ b/arch/x86_64/mm/fault.c @@ -56,17 +56,17 @@ int unregister_page_fault_notifier(struct notifier_block *nb) } EXPORT_SYMBOL_GPL(unregister_page_fault_notifier); -static inline int notify_page_fault(enum die_val val, const char *str, - struct pt_regs *regs, long err, int trap, int sig) +static inline int notify_page_fault(struct pt_regs *regs, long err) { struct die_args args = { .regs = regs, - .str = str, + .str = "page fault", .err = err, - .trapnr = trap, - .signr = sig + .trapnr = 14, + .signr = SIGSEGV }; - return atomic_notifier_call_chain(¬ify_page_fault_chain, val, &args); + return atomic_notifier_call_chain(¬ify_page_fault_chain, + DIE_PAGE_FAULT, &args); } /* Sometimes the CPU reports invalid exceptions on prefetch. @@ -355,8 +355,7 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, if (vmalloc_fault(address) >= 0) return; } - if (notify_page_fault(DIE_PAGE_FAULT, "page fault", regs, error_code, 14, - SIGSEGV) == NOTIFY_STOP) + if (notify_page_fault(regs, error_code) == NOTIFY_STOP) return; /* * Don't take the mm semaphore here. If we fixup a prefetch @@ -365,8 +364,7 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, goto bad_area_nosemaphore; } - if (notify_page_fault(DIE_PAGE_FAULT, "page fault", regs, error_code, 14, - SIGSEGV) == NOTIFY_STOP) + if (notify_page_fault(regs, error_code) == NOTIFY_STOP) return; if (likely(regs->eflags & X86_EFLAGS_IF)) -- cgit v1.2.3 From 24ce0e96f2dea558762c994d054ea2f3c01fa95a Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Tue, 13 Feb 2007 13:26:23 +0100 Subject: [PATCH] x86-64: Tighten mce_amd driver MSR reads while debugging an unrelated problem in Xen, I noticed odd reads from non-existent MSRs. Having now found time to look why these happen, I came up with below patch, which - prevents accessing MCi_MISCj with j > 0 when the block pointer in MCi_MISC0 is zero - accesses only contiguous MCi_MISCj until a non-implemented one is found - doesn't touch unimplemented blocks in mce_threshold_interrupt at all - gives names to two bits previously derived from MASK_VALID_HI (it took me some time to understand the code without this) The first three items, besides being apparently closer to the spec, should namely help cutting down on the time mce_threshold_interrupt() takes. Signed-off-by: Andi Kleen --- arch/x86_64/kernel/mce_amd.c | 40 +++++++++++++++++++++++++--------------- 1 file changed, 25 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/mce_amd.c b/arch/x86_64/kernel/mce_amd.c index 93c707257637..cd8dbe57b33a 100644 --- a/arch/x86_64/kernel/mce_amd.c +++ b/arch/x86_64/kernel/mce_amd.c @@ -37,6 +37,8 @@ #define THRESHOLD_MAX 0xFFF #define INT_TYPE_APIC 0x00020000 #define MASK_VALID_HI 0x80000000 +#define MASK_CNTP_HI 0x40000000 +#define MASK_LOCKED_HI 0x20000000 #define MASK_LVTOFF_HI 0x00F00000 #define MASK_COUNT_EN_HI 0x00080000 #define MASK_INT_TYPE_HI 0x00060000 @@ -122,14 +124,17 @@ void __cpuinit mce_amd_feature_init(struct cpuinfo_x86 *c) for (block = 0; block < NR_BLOCKS; ++block) { if (block == 0) address = MSR_IA32_MC0_MISC + bank * 4; - else if (block == 1) - address = MCG_XBLK_ADDR - + ((low & MASK_BLKPTR_LO) >> 21); + else if (block == 1) { + address = (low & MASK_BLKPTR_LO) >> 21; + if (!address) + break; + address += MCG_XBLK_ADDR; + } else ++address; if (rdmsr_safe(address, &low, &high)) - continue; + break; if (!(high & MASK_VALID_HI)) { if (block) @@ -138,8 +143,8 @@ void __cpuinit mce_amd_feature_init(struct cpuinfo_x86 *c) break; } - if (!(high & MASK_VALID_HI >> 1) || - (high & MASK_VALID_HI >> 2)) + if (!(high & MASK_CNTP_HI) || + (high & MASK_LOCKED_HI)) continue; if (!block) @@ -187,17 +192,22 @@ asmlinkage void mce_threshold_interrupt(void) /* assume first bank caused it */ for (bank = 0; bank < NR_BANKS; ++bank) { + if (!(per_cpu(bank_map, m.cpu) & (1 << bank))) + continue; for (block = 0; block < NR_BLOCKS; ++block) { if (block == 0) address = MSR_IA32_MC0_MISC + bank * 4; - else if (block == 1) - address = MCG_XBLK_ADDR - + ((low & MASK_BLKPTR_LO) >> 21); + else if (block == 1) { + address = (low & MASK_BLKPTR_LO) >> 21; + if (!address) + break; + address += MCG_XBLK_ADDR; + } else ++address; if (rdmsr_safe(address, &low, &high)) - continue; + break; if (!(high & MASK_VALID_HI)) { if (block) @@ -206,8 +216,8 @@ asmlinkage void mce_threshold_interrupt(void) break; } - if (!(high & MASK_VALID_HI >> 1) || - (high & MASK_VALID_HI >> 2)) + if (!(high & MASK_CNTP_HI) || + (high & MASK_LOCKED_HI)) continue; if (high & MASK_OVERFLOW_HI) { @@ -385,7 +395,7 @@ static __cpuinit int allocate_threshold_blocks(unsigned int cpu, return 0; if (rdmsr_safe(address, &low, &high)) - goto recurse; + return 0; if (!(high & MASK_VALID_HI)) { if (block) @@ -394,8 +404,8 @@ static __cpuinit int allocate_threshold_blocks(unsigned int cpu, return 0; } - if (!(high & MASK_VALID_HI >> 1) || - (high & MASK_VALID_HI >> 2)) + if (!(high & MASK_CNTP_HI) || + (high & MASK_LOCKED_HI)) goto recurse; b = kzalloc(sizeof(struct threshold_block), GFP_KERNEL); -- cgit v1.2.3 From a98f0dd34d94ea0b5f3816196bea5dba467827bb Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Tue, 13 Feb 2007 13:26:23 +0100 Subject: [PATCH] x86-64: Allow to run a program when a machine check event is detected When a machine check event is detected (including a AMD RevF threshold overflow event) allow to run a "trigger" program. This allows user space to react to such events sooner. The trigger is configured using a new trigger entry in the machinecheck sysfs interface. It is currently shared between all CPUs. I also fixed the AMD threshold handler to run the machine check polling code immediately to actually log any events that might have caused the threshold interrupt. Also added some documentation for the mce sysfs interface. Signed-off-by: Andi Kleen --- arch/x86_64/kernel/mce.c | 66 ++++++++++++++++++++++++++++++++++++-------- arch/x86_64/kernel/mce_amd.c | 4 +++ 2 files changed, 58 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/mce.c b/arch/x86_64/kernel/mce.c index bdb54a2c9f18..8011a8e1c7d4 100644 --- a/arch/x86_64/kernel/mce.c +++ b/arch/x86_64/kernel/mce.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include #include @@ -42,6 +43,10 @@ static unsigned long console_logged; static int notify_user; static int rip_msr; static int mce_bootlog = 1; +static atomic_t mce_events; + +static char trigger[128]; +static char *trigger_argv[2] = { trigger, NULL }; /* * Lockless MCE logging infrastructure. @@ -57,6 +62,7 @@ struct mce_log mcelog = { void mce_log(struct mce *mce) { unsigned next, entry; + atomic_inc(&mce_events); mce->finished = 0; wmb(); for (;;) { @@ -161,6 +167,17 @@ static inline void mce_get_rip(struct mce *m, struct pt_regs *regs) } } +static void do_mce_trigger(void) +{ + static atomic_t mce_logged; + int events = atomic_read(&mce_events); + if (events != atomic_read(&mce_logged) && trigger[0]) { + /* Small race window, but should be harmless. */ + atomic_set(&mce_logged, events); + call_usermodehelper(trigger, trigger_argv, NULL, -1); + } +} + /* * The actual machine check handler */ @@ -234,8 +251,12 @@ void do_machine_check(struct pt_regs * regs, long error_code) } /* Never do anything final in the polling timer */ - if (!regs) + if (!regs) { + /* Normal interrupt context here. Call trigger for any new + events. */ + do_mce_trigger(); goto out; + } /* If we didn't find an uncorrectable error, pick the last one (shouldn't happen, just being safe). */ @@ -606,17 +627,42 @@ DEFINE_PER_CPU(struct sys_device, device_mce); } \ static SYSDEV_ATTR(name, 0644, show_ ## name, set_ ## name); +/* TBD should generate these dynamically based on number of available banks */ ACCESSOR(bank0ctl,bank[0],mce_restart()) ACCESSOR(bank1ctl,bank[1],mce_restart()) ACCESSOR(bank2ctl,bank[2],mce_restart()) ACCESSOR(bank3ctl,bank[3],mce_restart()) ACCESSOR(bank4ctl,bank[4],mce_restart()) ACCESSOR(bank5ctl,bank[5],mce_restart()) -static struct sysdev_attribute * bank_attributes[NR_BANKS] = { - &attr_bank0ctl, &attr_bank1ctl, &attr_bank2ctl, - &attr_bank3ctl, &attr_bank4ctl, &attr_bank5ctl}; + +static ssize_t show_trigger(struct sys_device *s, char *buf) +{ + strcpy(buf, trigger); + strcat(buf, "\n"); + return strlen(trigger) + 1; +} + +static ssize_t set_trigger(struct sys_device *s,const char *buf,size_t siz) +{ + char *p; + int len; + strncpy(trigger, buf, sizeof(trigger)); + trigger[sizeof(trigger)-1] = 0; + len = strlen(trigger); + p = strchr(trigger, '\n'); + if (*p) *p = 0; + return len; +} + +static SYSDEV_ATTR(trigger, 0644, show_trigger, set_trigger); ACCESSOR(tolerant,tolerant,) ACCESSOR(check_interval,check_interval,mce_restart()) +static struct sysdev_attribute *mce_attributes[] = { + &attr_bank0ctl, &attr_bank1ctl, &attr_bank2ctl, + &attr_bank3ctl, &attr_bank4ctl, &attr_bank5ctl, + &attr_tolerant, &attr_check_interval, &attr_trigger, + NULL +}; /* Per cpu sysdev init. All of the cpus still share the same ctl bank */ static __cpuinit int mce_create_device(unsigned int cpu) @@ -632,11 +678,9 @@ static __cpuinit int mce_create_device(unsigned int cpu) err = sysdev_register(&per_cpu(device_mce,cpu)); if (!err) { - for (i = 0; i < banks; i++) + for (i = 0; mce_attributes[i]; i++) sysdev_create_file(&per_cpu(device_mce,cpu), - bank_attributes[i]); - sysdev_create_file(&per_cpu(device_mce,cpu), &attr_tolerant); - sysdev_create_file(&per_cpu(device_mce,cpu), &attr_check_interval); + mce_attributes[i]); } return err; } @@ -645,11 +689,9 @@ static void mce_remove_device(unsigned int cpu) { int i; - for (i = 0; i < banks; i++) + for (i = 0; mce_attributes[i]; i++) sysdev_remove_file(&per_cpu(device_mce,cpu), - bank_attributes[i]); - sysdev_remove_file(&per_cpu(device_mce,cpu), &attr_tolerant); - sysdev_remove_file(&per_cpu(device_mce,cpu), &attr_check_interval); + mce_attributes[i]); sysdev_unregister(&per_cpu(device_mce,cpu)); memset(&per_cpu(device_mce, cpu).kobj, 0, sizeof(struct kobject)); } diff --git a/arch/x86_64/kernel/mce_amd.c b/arch/x86_64/kernel/mce_amd.c index cd8dbe57b33a..d0bd5d66e103 100644 --- a/arch/x86_64/kernel/mce_amd.c +++ b/arch/x86_64/kernel/mce_amd.c @@ -220,6 +220,10 @@ asmlinkage void mce_threshold_interrupt(void) (high & MASK_LOCKED_HI)) continue; + /* Log the machine check that caused the threshold + event. */ + do_machine_check(NULL, 0); + if (high & MASK_OVERFLOW_HI) { rdmsrl(address, m.misc); rdmsrl(MSR_IA32_MC0_STATUS + bank * 4, -- cgit v1.2.3 From 8c40ad02e5b026902b8ce134f895b3b09803db39 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Tue, 13 Feb 2007 13:26:23 +0100 Subject: [PATCH] i386: Small cleanup to TLB flush code - Remove outdated comment - Use cpu_relax() in a busy loop Signed-off-by: Andi Kleen --- arch/i386/kernel/smp.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/smp.c b/arch/i386/kernel/smp.c index ffc4f65c5189..9bd9637ae692 100644 --- a/arch/i386/kernel/smp.c +++ b/arch/i386/kernel/smp.c @@ -375,8 +375,7 @@ static void flush_tlb_others(cpumask_t cpumask, struct mm_struct *mm, /* * i'm not happy about this global shared spinlock in the * MM hot path, but we'll see how contended it is. - * Temporarily this turns IRQs off, so that lockups are - * detected by the NMI watchdog. + * AK: x86-64 has a faster method that could be ported. */ spin_lock(&tlbstate_lock); @@ -401,7 +400,7 @@ static void flush_tlb_others(cpumask_t cpumask, struct mm_struct *mm, while (!cpus_empty(flush_cpumask)) /* nothing. lockup detection does not belong here */ - mb(); + cpu_relax(); flush_mm = NULL; flush_va = 0; -- cgit v1.2.3 From edf8dd36b53fdd558bc9a8ac5be793d27e110f90 Mon Sep 17 00:00:00 2001 From: Nicolas Kaiser Date: Tue, 13 Feb 2007 13:26:23 +0100 Subject: [PATCH] x86-64: Kconfig typos Some typos in Kconfig. Signed-off-by: Nicolas Kaiser Signed-off-by: Andi Kleen --- arch/x86_64/Kconfig | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig index a55382a1bb46..7982cbc3bc94 100644 --- a/arch/x86_64/Kconfig +++ b/arch/x86_64/Kconfig @@ -152,18 +152,18 @@ config MPSC Optimize for Intel Pentium 4 and older Nocona/Dempsey Xeon CPUs with Intel Extended Memory 64 Technology(EM64T). For details see . - Note the the latest Xeons (Xeon 51xx and 53xx) are not based on the - Netburst core and shouldn't use this option. You can distingush them + Note that the latest Xeons (Xeon 51xx and 53xx) are not based on the + Netburst core and shouldn't use this option. You can distinguish them using the cpu family field - in /proc/cpuinfo. Family 15 is a older Xeon, Family 6 a newer one - (this rule only applies to system that support EM64T) + in /proc/cpuinfo. Family 15 is an older Xeon, Family 6 a newer one + (this rule only applies to systems that support EM64T) config MCORE2 bool "Intel Core2 / newer Xeon" help Optimize for Intel Core2 and newer Xeons (51xx) - You can distingush the newer Xeons from the older ones using - the cpu family field in /proc/cpuinfo. 15 is a older Xeon + You can distinguish the newer Xeons from the older ones using + the cpu family field in /proc/cpuinfo. 15 is an older Xeon (use CONFIG_MPSC then), 6 is a newer one. This rule only applies to CPUs that support EM64T. -- cgit v1.2.3 From d958f143329e685d114725b64fe6bef22994c74c Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Tue, 13 Feb 2007 13:26:23 +0100 Subject: [PATCH] i386: use smp_call_function_single() It will execute rdmsr and wrmsr only on the cpu we need. Signed-off-by: Alexey Dobriyan Signed-off-by: Andi Kleen --- arch/i386/kernel/msr.c | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/msr.c b/arch/i386/kernel/msr.c index 4e14264f392a..bcaa6e9b6197 100644 --- a/arch/i386/kernel/msr.c +++ b/arch/i386/kernel/msr.c @@ -68,7 +68,6 @@ static inline int rdmsr_eio(u32 reg, u32 *eax, u32 *edx) #ifdef CONFIG_SMP struct msr_command { - int cpu; int err; u32 reg; u32 data[2]; @@ -78,16 +77,14 @@ static void msr_smp_wrmsr(void *cmd_block) { struct msr_command *cmd = (struct msr_command *)cmd_block; - if (cmd->cpu == smp_processor_id()) - cmd->err = wrmsr_eio(cmd->reg, cmd->data[0], cmd->data[1]); + cmd->err = wrmsr_eio(cmd->reg, cmd->data[0], cmd->data[1]); } static void msr_smp_rdmsr(void *cmd_block) { struct msr_command *cmd = (struct msr_command *)cmd_block; - if (cmd->cpu == smp_processor_id()) - cmd->err = rdmsr_eio(cmd->reg, &cmd->data[0], &cmd->data[1]); + cmd->err = rdmsr_eio(cmd->reg, &cmd->data[0], &cmd->data[1]); } static inline int do_wrmsr(int cpu, u32 reg, u32 eax, u32 edx) @@ -99,12 +96,11 @@ static inline int do_wrmsr(int cpu, u32 reg, u32 eax, u32 edx) if (cpu == smp_processor_id()) { ret = wrmsr_eio(reg, eax, edx); } else { - cmd.cpu = cpu; cmd.reg = reg; cmd.data[0] = eax; cmd.data[1] = edx; - smp_call_function(msr_smp_wrmsr, &cmd, 1, 1); + smp_call_function_single(cpu, msr_smp_wrmsr, &cmd, 1, 1); ret = cmd.err; } preempt_enable(); @@ -120,10 +116,9 @@ static inline int do_rdmsr(int cpu, u32 reg, u32 * eax, u32 * edx) if (cpu == smp_processor_id()) { ret = rdmsr_eio(reg, eax, edx); } else { - cmd.cpu = cpu; cmd.reg = reg; - smp_call_function(msr_smp_rdmsr, &cmd, 1, 1); + smp_call_function_single(cpu, msr_smp_rdmsr, &cmd, 1, 1); *eax = cmd.data[0]; *edx = cmd.data[1]; -- cgit v1.2.3 From ad4e680fb2220518de5118a8e734240d4c374fe2 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Tue, 13 Feb 2007 13:26:23 +0100 Subject: [PATCH] i386: use smp_call_function_single() It will execure cpuid only on the cpu we need. Signed-off-by: Alexey Dobriyan Signed-off-by: Andi Kleen --- arch/i386/kernel/cpuid.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/cpuid.c b/arch/i386/kernel/cpuid.c index 4da75fa3208d..eeae0d992337 100644 --- a/arch/i386/kernel/cpuid.c +++ b/arch/i386/kernel/cpuid.c @@ -48,7 +48,6 @@ static struct class *cpuid_class; #ifdef CONFIG_SMP struct cpuid_command { - int cpu; u32 reg; u32 *data; }; @@ -57,8 +56,7 @@ static void cpuid_smp_cpuid(void *cmd_block) { struct cpuid_command *cmd = (struct cpuid_command *)cmd_block; - if (cmd->cpu == smp_processor_id()) - cpuid(cmd->reg, &cmd->data[0], &cmd->data[1], &cmd->data[2], + cpuid(cmd->reg, &cmd->data[0], &cmd->data[1], &cmd->data[2], &cmd->data[3]); } @@ -70,11 +68,10 @@ static inline void do_cpuid(int cpu, u32 reg, u32 * data) if (cpu == smp_processor_id()) { cpuid(reg, &data[0], &data[1], &data[2], &data[3]); } else { - cmd.cpu = cpu; cmd.reg = reg; cmd.data = data; - smp_call_function(cpuid_smp_cpuid, &cmd, 1, 1); + smp_call_function_single(cpu, cpuid_smp_cpuid, &cmd, 1, 1); } preempt_enable(); } -- cgit v1.2.3 From 016d6f35803667ffbe3e7bba8b58a6b611fac998 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Tue, 13 Feb 2007 13:26:23 +0100 Subject: [PATCH] i386: Convert /proc/apm to seqfile Byte-to-byte identical /proc/apm here. Signed-off-by: Alexey Dobriyan Signed-off-by: Andi Kleen --- arch/i386/kernel/apm.c | 26 ++++++++++++++++++-------- 1 file changed, 18 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/apm.c b/arch/i386/kernel/apm.c index db99a8948dae..f9ba0af7ee1f 100644 --- a/arch/i386/kernel/apm.c +++ b/arch/i386/kernel/apm.c @@ -211,6 +211,7 @@ #include #include #include +#include #include #include #include @@ -1636,9 +1637,8 @@ static int do_open(struct inode * inode, struct file * filp) return 0; } -static int apm_get_info(char *buf, char **start, off_t fpos, int length) +static int proc_apm_show(struct seq_file *m, void *v) { - char * p; unsigned short bx; unsigned short cx; unsigned short dx; @@ -1650,8 +1650,6 @@ static int apm_get_info(char *buf, char **start, off_t fpos, int length) int time_units = -1; char *units = "?"; - p = buf; - if ((num_online_cpus() == 1) && !(error = apm_get_power_status(&bx, &cx, &dx))) { ac_line_status = (bx >> 8) & 0xff; @@ -1705,7 +1703,7 @@ static int apm_get_info(char *buf, char **start, off_t fpos, int length) -1: Unknown 8) min = minutes; sec = seconds */ - p += sprintf(p, "%s %d.%d 0x%02x 0x%02x 0x%02x 0x%02x %d%% %d %s\n", + seq_printf(m, "%s %d.%d 0x%02x 0x%02x 0x%02x 0x%02x %d%% %d %s\n", driver_version, (apm_info.bios.version >> 8) & 0xff, apm_info.bios.version & 0xff, @@ -1716,10 +1714,22 @@ static int apm_get_info(char *buf, char **start, off_t fpos, int length) percentage, time_units, units); + return 0; +} - return p - buf; +static int proc_apm_open(struct inode *inode, struct file *file) +{ + return single_open(file, proc_apm_show, NULL); } +static const struct file_operations apm_file_ops = { + .owner = THIS_MODULE, + .open = proc_apm_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + static int apm(void *unused) { unsigned short bx; @@ -2341,9 +2351,9 @@ static int __init apm_init(void) set_base(gdt[APM_DS >> 3], __va((unsigned long)apm_info.bios.dseg << 4)); - apm_proc = create_proc_info_entry("apm", 0, NULL, apm_get_info); + apm_proc = create_proc_entry("apm", 0, NULL); if (apm_proc) - apm_proc->owner = THIS_MODULE; + apm_proc->proc_fops = &apm_file_ops; kapmd_task = kthread_create(apm, NULL, "kapmd"); if (IS_ERR(kapmd_task)) { -- cgit v1.2.3 From 6c5806cae50717f31878d0da29109b10610ab862 Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Tue, 13 Feb 2007 13:26:23 +0100 Subject: [PATCH] i386: fix size_or_mask and size_and_mask mtrr: fix size_or_mask and size_and_mask This fixes two bugs in /proc/mtrr interface: o If physical address size crosses the 44 bit boundary size_or_mask is evaluated wrong. o size_and_mask limits width of physical base address for an MTRR to be less than 44 bits. TBD: later patch had one more change, but I think that was bogus. TBD: need to double check Signed-off-by: Andreas Herrmann Signed-off-by: Andi Kleen --- arch/i386/kernel/cpu/mtrr/main.c | 6 +++--- arch/i386/kernel/cpu/mtrr/mtrr.h | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/cpu/mtrr/main.c b/arch/i386/kernel/cpu/mtrr/main.c index 16bb7ea87145..0acfb6a5a220 100644 --- a/arch/i386/kernel/cpu/mtrr/main.c +++ b/arch/i386/kernel/cpu/mtrr/main.c @@ -50,7 +50,7 @@ u32 num_var_ranges = 0; unsigned int *usage_table; static DEFINE_MUTEX(mtrr_mutex); -u32 size_or_mask, size_and_mask; +u64 size_or_mask, size_and_mask; static struct mtrr_ops * mtrr_ops[X86_VENDOR_NUM] = {}; @@ -662,8 +662,8 @@ void __init mtrr_bp_init(void) boot_cpu_data.x86_mask == 0x4)) phys_addr = 36; - size_or_mask = ~((1 << (phys_addr - PAGE_SHIFT)) - 1); - size_and_mask = ~size_or_mask & 0xfff00000; + size_or_mask = ~((1ULL << (phys_addr - PAGE_SHIFT)) - 1); + size_and_mask = ~size_or_mask & 0xfffff00000ULL; } else if (boot_cpu_data.x86_vendor == X86_VENDOR_CENTAUR && boot_cpu_data.x86 == 6) { /* VIA C* family have Intel style MTRRs, but diff --git a/arch/i386/kernel/cpu/mtrr/mtrr.h b/arch/i386/kernel/cpu/mtrr/mtrr.h index d61ea9db6cfe..289dfe6030e3 100644 --- a/arch/i386/kernel/cpu/mtrr/mtrr.h +++ b/arch/i386/kernel/cpu/mtrr/mtrr.h @@ -84,7 +84,7 @@ void get_mtrr_state(void); extern void set_mtrr_ops(struct mtrr_ops * ops); -extern u32 size_or_mask, size_and_mask; +extern u64 size_or_mask, size_and_mask; extern struct mtrr_ops * mtrr_if; #define is_cpu(vnd) (mtrr_if && mtrr_if->vendor == X86_VENDOR_##vnd) -- cgit v1.2.3 From 2f7a2a79c3ebb44f8b1b7d9b4fd3a650eb69e544 Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Tue, 13 Feb 2007 13:26:24 +0100 Subject: [PATCH] x86-64: - Ignore long SMI interrupts in clock calibration code - update 1 Add failsafe mechanism to HPET/TSC clock calibration. Signed-off-by: Jack Steiner Updated to include failsafe mechanism & additional community feedback. Patch built on latest 2.6.20-rc4-mm1 tree. Signed-off-by: Andi Kleen --- arch/x86_64/kernel/time.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c index 335cc91c49b7..9c7fba30dac1 100644 --- a/arch/x86_64/kernel/time.c +++ b/arch/x86_64/kernel/time.c @@ -657,6 +657,7 @@ core_initcall(cpufreq_tsc); #define TICK_COUNT 100000000 #define TICK_MIN 5000 +#define MAX_READ_RETRIES 5 /* * Some platforms take periodic SMI interrupts with 5ms duration. Make sure none @@ -664,13 +665,17 @@ core_initcall(cpufreq_tsc); */ static void __init read_hpet_tsc(int *hpet, int *tsc) { - int tsc1, tsc2, hpet1; + int tsc1, tsc2, hpet1, retries = 0; + static int msg; do { tsc1 = get_cycles_sync(); hpet1 = hpet_readl(HPET_COUNTER); tsc2 = get_cycles_sync(); - } while (tsc2 - tsc1 > TICK_MIN); + } while (tsc2 - tsc1 > TICK_MIN && retries++ < MAX_READ_RETRIES); + if (retries >= MAX_READ_RETRIES && !msg++) + printk(KERN_WARNING + "hpet.c: exceeded max retries to read HPET & TSC\n"); *hpet = hpet1; *tsc = tsc2; } -- cgit v1.2.3 From f49481bc50fce428521497977861b8115666dbe7 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Tue, 13 Feb 2007 13:26:24 +0100 Subject: [PATCH] x86-64: Check return value of putreg in PTRACE_SETREGS This means if an illegal value is set for the segment registers there ptrace will error out now with an errno instead of silently ignoring it. Signed-off-by: Andi Kleen --- arch/x86_64/kernel/ptrace.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/ptrace.c b/arch/x86_64/kernel/ptrace.c index addc14af0c56..4326a690a509 100644 --- a/arch/x86_64/kernel/ptrace.c +++ b/arch/x86_64/kernel/ptrace.c @@ -536,8 +536,12 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) } ret = 0; for (ui = 0; ui < sizeof(struct user_regs_struct); ui += sizeof(long)) { - ret |= __get_user(tmp, (unsigned long __user *) data); - putreg(child, ui, tmp); + ret = __get_user(tmp, (unsigned long __user *) data); + if (ret) + break; + ret = putreg(child, ui, tmp); + if (ret) + break; data += sizeof(long); } break; -- cgit v1.2.3 From 9a11ff68273f440b1d33fcc4d550ffc881e6a0b4 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Tue, 13 Feb 2007 13:26:24 +0100 Subject: [PATCH] x86-64: Unexport __supported_pte_mask The symbol is needed to manipulate page tables, and modules shouldn't do that. Leftover from 2.4, but no in tree module should need it now. Signed-off-by: Andi Kleen --- arch/x86_64/kernel/setup64.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/setup64.c b/arch/x86_64/kernel/setup64.c index 8c4b80fe71a1..6a70b55f719d 100644 --- a/arch/x86_64/kernel/setup64.c +++ b/arch/x86_64/kernel/setup64.c @@ -37,7 +37,6 @@ struct desc_ptr idt_descr = { 256 * 16 - 1, (unsigned long) idt_table }; char boot_cpu_stack[IRQSTACKSIZE] __attribute__((section(".bss.page_aligned"))); unsigned long __supported_pte_mask __read_mostly = ~0UL; -EXPORT_SYMBOL(__supported_pte_mask); static int do_not_nx __cpuinitdata = 0; /* noexec=on|off -- cgit v1.2.3 From ffb6017563aa15f9a8cff9a30b861d42c2695894 Mon Sep 17 00:00:00 2001 From: Zachary Amsden Date: Tue, 13 Feb 2007 13:26:24 +0100 Subject: [PATCH] x86-64: x86_64 - Fix FS/GS registers for VT execution Initialize FS and GS to __KERNEL_DS as well. The actual value of them is not important, but it is important to reload them in protected mode. At this time, they still retain the real mode values from initial boot. VT disallows execution of code under such conditions, which means hardware virtualization can not be used to boot the kernel on Intel platforms, making the boot time painfully slow. This requires moving the GS load before the load of GS_BASE, so just move all the segments loads there to keep them together in the code. Signed-off-by: Zachary Amsden Signed-off-by: Andi Kleen --- arch/x86_64/kernel/head.S | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/head.S b/arch/x86_64/kernel/head.S index 1e6f80870679..598a4d0351fc 100644 --- a/arch/x86_64/kernel/head.S +++ b/arch/x86_64/kernel/head.S @@ -163,6 +163,20 @@ startup_64: */ lgdt cpu_gdt_descr + /* set up data segments. actually 0 would do too */ + movl $__KERNEL_DS,%eax + movl %eax,%ds + movl %eax,%ss + movl %eax,%es + + /* + * We don't really need to load %fs or %gs, but load them anyway + * to kill any stale realmode selectors. This allows execution + * under VT hardware. + */ + movl %eax,%fs + movl %eax,%gs + /* * Setup up a dummy PDA. this is just for some early bootup code * that does in_interrupt() @@ -173,12 +187,6 @@ startup_64: shrq $32,%rdx wrmsr - /* set up data segments. actually 0 would do too */ - movl $__KERNEL_DS,%eax - movl %eax,%ds - movl %eax,%ss - movl %eax,%es - /* esi is pointer to real mode structure with interesting info. pass it to C */ movl %esi, %edi -- cgit v1.2.3 From 00edefae050c2c2d1e26fa9984f8f529fbc45989 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Tue, 13 Feb 2007 13:26:24 +0100 Subject: [PATCH] x86-64: Fix off by one error in IOMMU boundary checking Should be harmless because there is normally no memory there, but technically it was incorrect. Pointed out by Leo Duran Signed-off-by: Andi Kleen --- arch/x86_64/kernel/pci-gart.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/pci-gart.c b/arch/x86_64/kernel/pci-gart.c index fc1960f1f243..030eb3753358 100644 --- a/arch/x86_64/kernel/pci-gart.c +++ b/arch/x86_64/kernel/pci-gart.c @@ -185,7 +185,7 @@ static void iommu_full(struct device *dev, size_t size, int dir) static inline int need_iommu(struct device *dev, unsigned long addr, size_t size) { u64 mask = *dev->dma_mask; - int high = addr + size >= mask; + int high = addr + size > mask; int mmu = high; if (force_iommu) mmu = 1; @@ -195,7 +195,7 @@ static inline int need_iommu(struct device *dev, unsigned long addr, size_t size static inline int nonforced_iommu(struct device *dev, unsigned long addr, size_t size) { u64 mask = *dev->dma_mask; - int high = addr + size >= mask; + int high = addr + size > mask; int mmu = high; return mmu; } -- cgit v1.2.3 From fc986db4fc1e773e240a19bc8b407ead88982cea Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Tue, 13 Feb 2007 13:26:24 +0100 Subject: [PATCH] x86-64: Don't reserve ROMs We trust the e820 table, so explicitely reserving ROMs shouldn't be needed. Signed-off-by: Andi Kleen --- arch/x86_64/kernel/setup.c | 130 +-------------------------------------------- 1 file changed, 2 insertions(+), 128 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c index f330f8285499..e82c1a155af5 100644 --- a/arch/x86_64/kernel/setup.c +++ b/arch/x86_64/kernel/setup.c @@ -138,128 +138,6 @@ struct resource code_resource = { .flags = IORESOURCE_RAM, }; -#define IORESOURCE_ROM (IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM) - -static struct resource system_rom_resource = { - .name = "System ROM", - .start = 0xf0000, - .end = 0xfffff, - .flags = IORESOURCE_ROM, -}; - -static struct resource extension_rom_resource = { - .name = "Extension ROM", - .start = 0xe0000, - .end = 0xeffff, - .flags = IORESOURCE_ROM, -}; - -static struct resource adapter_rom_resources[] = { - { .name = "Adapter ROM", .start = 0xc8000, .end = 0, - .flags = IORESOURCE_ROM }, - { .name = "Adapter ROM", .start = 0, .end = 0, - .flags = IORESOURCE_ROM }, - { .name = "Adapter ROM", .start = 0, .end = 0, - .flags = IORESOURCE_ROM }, - { .name = "Adapter ROM", .start = 0, .end = 0, - .flags = IORESOURCE_ROM }, - { .name = "Adapter ROM", .start = 0, .end = 0, - .flags = IORESOURCE_ROM }, - { .name = "Adapter ROM", .start = 0, .end = 0, - .flags = IORESOURCE_ROM } -}; - -static struct resource video_rom_resource = { - .name = "Video ROM", - .start = 0xc0000, - .end = 0xc7fff, - .flags = IORESOURCE_ROM, -}; - -static struct resource video_ram_resource = { - .name = "Video RAM area", - .start = 0xa0000, - .end = 0xbffff, - .flags = IORESOURCE_RAM, -}; - -#define romsignature(x) (*(unsigned short *)(x) == 0xaa55) - -static int __init romchecksum(unsigned char *rom, unsigned long length) -{ - unsigned char *p, sum = 0; - - for (p = rom; p < rom + length; p++) - sum += *p; - return sum == 0; -} - -static void __init probe_roms(void) -{ - unsigned long start, length, upper; - unsigned char *rom; - int i; - - /* video rom */ - upper = adapter_rom_resources[0].start; - for (start = video_rom_resource.start; start < upper; start += 2048) { - rom = isa_bus_to_virt(start); - if (!romsignature(rom)) - continue; - - video_rom_resource.start = start; - - /* 0 < length <= 0x7f * 512, historically */ - length = rom[2] * 512; - - /* if checksum okay, trust length byte */ - if (length && romchecksum(rom, length)) - video_rom_resource.end = start + length - 1; - - request_resource(&iomem_resource, &video_rom_resource); - break; - } - - start = (video_rom_resource.end + 1 + 2047) & ~2047UL; - if (start < upper) - start = upper; - - /* system rom */ - request_resource(&iomem_resource, &system_rom_resource); - upper = system_rom_resource.start; - - /* check for extension rom (ignore length byte!) */ - rom = isa_bus_to_virt(extension_rom_resource.start); - if (romsignature(rom)) { - length = extension_rom_resource.end - extension_rom_resource.start + 1; - if (romchecksum(rom, length)) { - request_resource(&iomem_resource, &extension_rom_resource); - upper = extension_rom_resource.start; - } - } - - /* check for adapter roms on 2k boundaries */ - for (i = 0; i < ARRAY_SIZE(adapter_rom_resources) && start < upper; - start += 2048) { - rom = isa_bus_to_virt(start); - if (!romsignature(rom)) - continue; - - /* 0 < length <= 0x7f * 512, historically */ - length = rom[2] * 512; - - /* but accept any length that fits if checksum okay */ - if (!length || start + length > upper || !romchecksum(rom, length)) - continue; - - adapter_rom_resources[i].start = start; - adapter_rom_resources[i].end = start + length - 1; - request_resource(&iomem_resource, &adapter_rom_resources[i]); - - start = adapter_rom_resources[i++].end & ~2047UL; - } -} - #ifdef CONFIG_PROC_VMCORE /* elfcorehdr= specifies the location of elf core header * stored by the crashed kernel. This option will be passed @@ -524,15 +402,11 @@ void __init setup_arch(char **cmdline_p) init_apic_mappings(); /* - * Request address space for all standard RAM and ROM resources - * and also for regions reported as reserved by the e820. - */ - probe_roms(); + * We trust e820 completely. No explicit ROM probing in memory. + */ e820_reserve_resources(); e820_mark_nosave_regions(); - request_resource(&iomem_resource, &video_ram_resource); - { unsigned i; /* request I/O space for devices used on all i[345]86 PCs */ -- cgit v1.2.3 From 310adfdd9153f6ae818981a38a48dd2330990d8d Mon Sep 17 00:00:00 2001 From: Muli Ben-Yehuda Date: Tue, 13 Feb 2007 13:26:24 +0100 Subject: [PATCH] x86-64: robustify bad_dma_address handling - set bad_dma_address explicitly to 0x0 - reserve 32 pages from bad_dma_address and up - WARN_ON() a driver feeding us bad_dma_address Thanks to Leo Duran for the suggestion. Signed-off-by: Muli Ben-Yehuda Signed-off-by: Andi Kleen Cc: Leo Duran Cc: Job Mason --- arch/x86_64/kernel/pci-calgary.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/pci-calgary.c b/arch/x86_64/kernel/pci-calgary.c index 3d65b1d4c2b3..04480c3b68f5 100644 --- a/arch/x86_64/kernel/pci-calgary.c +++ b/arch/x86_64/kernel/pci-calgary.c @@ -138,6 +138,8 @@ static const unsigned long phb_debug_offsets[] = { #define PHB_DEBUG_STUFF_OFFSET 0x0020 +#define EMERGENCY_PAGES 32 /* = 128KB */ + unsigned int specified_table_size = TCE_TABLE_SIZE_UNSPECIFIED; static int translate_empty_slots __read_mostly = 0; static int calgary_detected __read_mostly = 0; @@ -296,6 +298,16 @@ static void __iommu_free(struct iommu_table *tbl, dma_addr_t dma_addr, { unsigned long entry; unsigned long badbit; + unsigned long badend; + + /* were we called with bad_dma_address? */ + badend = bad_dma_address + (EMERGENCY_PAGES * PAGE_SIZE); + if (unlikely((dma_addr >= bad_dma_address) && (dma_addr < badend))) { + printk(KERN_ERR "Calgary: driver tried unmapping bad DMA " + "address 0x%Lx\n", dma_addr); + WARN_ON(1); + return; + } entry = dma_addr >> PAGE_SHIFT; @@ -656,8 +668,8 @@ static void __init calgary_reserve_regions(struct pci_dev *dev) u64 start; struct iommu_table *tbl = dev->sysdata; - /* reserve bad_dma_address in case it's a legal address */ - iommu_range_reserve(tbl, bad_dma_address, 1); + /* reserve EMERGENCY_PAGES from bad_dma_address and up */ + iommu_range_reserve(tbl, bad_dma_address, EMERGENCY_PAGES); /* avoid the BIOS/VGA first 640KB-1MB region */ start = (640 * 1024); @@ -1176,6 +1188,7 @@ int __init calgary_iommu_init(void) } force_iommu = 1; + bad_dma_address = 0x0; dma_ops = &calgary_dma_ops; return 0; -- cgit v1.2.3 From 5d0e600d903caa09e790824cc5812f0d97113b23 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Tue, 13 Feb 2007 13:26:24 +0100 Subject: [PATCH] x86: fix laptop bootup hang in init_acpi() During kernel bootup, a new T60 laptop (CoreDuo, 32-bit) hangs about 10%-20% of the time in acpi_init(): Calling initcall 0xc055ce1a: topology_init+0x0/0x2f() Calling initcall 0xc055d75e: mtrr_init_finialize+0x0/0x2c() Calling initcall 0xc05664f3: param_sysfs_init+0x0/0x175() Calling initcall 0xc014cb65: pm_sysrq_init+0x0/0x17() Calling initcall 0xc0569f99: init_bio+0x0/0xf4() Calling initcall 0xc056b865: genhd_device_init+0x0/0x50() Calling initcall 0xc056c4bd: fbmem_init+0x0/0x87() Calling initcall 0xc056dd74: acpi_init+0x0/0x1ee() It's a hard hang that not even an NMI could punch through! Frustratingly, adding printks or function tracing to the ACPI code made the hangs go away ... After some time an additional detail emerged: disabling the NMI watchdog made these occasional hangs go away. So i spent the better part of today trying to debug this and trying out various theories when i finally found the likely reason for the hang: if acpi_ns_initialize_devices() executes an _INI AML method and an NMI happens to hit that AML execution in the wrong moment, the machine would hang. (my theory is that this must be some sort of chipset setup method doing stores to chipset mmio registers?) Unfortunately given the characteristics of the hang it was sheer impossible to figure out which of the numerous AML methods is impacted by this problem. As a workaround i wrote an interface to disable chipset-based NMIs while executing _INI sections - and indeed this fixed the hang. I did a boot-loop of 100 separate reboots and none hung - while without the patch it would hang every 5-10 attempts. Out of caution i did not touch the nmi_watchdog=2 case (it's not related to the chipset anyway and didnt hang). I implemented this for both x86_64 and i686, tested the i686 laptop both with nmi_watchdog=1 [which triggered the hangs] and nmi_watchdog=2, and tested an Athlon64 box with the 64-bit kernel as well. Everything builds and works with the patch applied. Signed-off-by: Ingo Molnar Signed-off-by: Andi Kleen Cc: Andi Kleen Cc: Len Brown Signed-off-by: Andrew Morton --- arch/i386/kernel/nmi.c | 28 ++++++++++++++++++++++++++++ arch/x86_64/kernel/nmi.c | 27 +++++++++++++++++++++++++++ 2 files changed, 55 insertions(+) (limited to 'arch') diff --git a/arch/i386/kernel/nmi.c b/arch/i386/kernel/nmi.c index 7d3f4e22d6fb..b11abacc5cfd 100644 --- a/arch/i386/kernel/nmi.c +++ b/arch/i386/kernel/nmi.c @@ -383,6 +383,34 @@ void enable_timer_nmi_watchdog(void) } } +static void __acpi_nmi_disable(void *__unused) +{ + apic_write_around(APIC_LVT0, APIC_DM_NMI | APIC_LVT_MASKED); +} + +/* + * Disable timer based NMIs on all CPUs: + */ +void acpi_nmi_disable(void) +{ + if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC) + on_each_cpu(__acpi_nmi_disable, NULL, 0, 1); +} + +static void __acpi_nmi_enable(void *__unused) +{ + apic_write_around(APIC_LVT0, APIC_DM_NMI); +} + +/* + * Enable timer based NMIs on all CPUs: + */ +void acpi_nmi_enable(void) +{ + if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC) + on_each_cpu(__acpi_nmi_enable, NULL, 0, 1); +} + #ifdef CONFIG_PM static int nmi_pm_active; /* nmi_active before suspend */ diff --git a/arch/x86_64/kernel/nmi.c b/arch/x86_64/kernel/nmi.c index e59cda134166..269fe585e71e 100644 --- a/arch/x86_64/kernel/nmi.c +++ b/arch/x86_64/kernel/nmi.c @@ -368,6 +368,33 @@ void enable_timer_nmi_watchdog(void) } } +static void __acpi_nmi_disable(void *__unused) +{ + apic_write(APIC_LVT0, APIC_DM_NMI | APIC_LVT_MASKED); +} + +/* + * Disable timer based NMIs on all CPUs: + */ +void acpi_nmi_disable(void) +{ + if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC) + on_each_cpu(__acpi_nmi_disable, NULL, 0, 1); +} + +static void __acpi_nmi_enable(void *__unused) +{ + apic_write(APIC_LVT0, APIC_DM_NMI); +} + +/* + * Enable timer based NMIs on all CPUs: + */ +void acpi_nmi_enable(void) +{ + if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC) + on_each_cpu(__acpi_nmi_enable, NULL, 0, 1); +} #ifdef CONFIG_PM static int nmi_pm_active; /* nmi_active before suspend */ -- cgit v1.2.3 From 30b82ea08c3365a6fc916250ff2ad634717fc81b Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Tue, 13 Feb 2007 13:26:24 +0100 Subject: [PATCH] i386: All Transmeta CPUs have constant TSCs All Transmeta CPUs ever produced have constant-rate TSCs. Signed-off-by: H. Peter Anvin Signed-off-by: Andi Kleen Cc: Andi Kleen Signed-off-by: Andrew Morton --- arch/i386/kernel/cpu/transmeta.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/i386/kernel/cpu/transmeta.c b/arch/i386/kernel/cpu/transmeta.c index 4056fb7d2cdf..b536e810d27e 100644 --- a/arch/i386/kernel/cpu/transmeta.c +++ b/arch/i386/kernel/cpu/transmeta.c @@ -72,6 +72,9 @@ static void __cpuinit init_transmeta(struct cpuinfo_x86 *c) wrmsr(0x80860004, ~0, uk); c->x86_capability[0] = cpuid_edx(0x00000001); wrmsr(0x80860004, cap_mask, uk); + + /* All Transmeta CPUs have a constant TSC */ + set_bit(X86_FEATURE_CONSTANT_TSC, c->x86_capability); /* If we can run i686 user-space code, call us an i686 */ #define USER686 (X86_FEATURE_TSC|X86_FEATURE_CX8|X86_FEATURE_CMOV) -- cgit v1.2.3 From 3101673b659b916c965271c7f7c9b99cb353c01c Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 13 Feb 2007 13:26:24 +0100 Subject: [PATCH] i386: avoid gcc extension setcc() in math-emu is written as a gcc extension statement expression macro that returns a value. However, it's not used that way and it's not needed like that, so just make it a inline function so that we don't use an extension when it's not needed. Signed-off-by: Randy Dunlap Signed-off-by: Andi Kleen Cc: Andi Kleen Cc: Christoph Hellwig Cc: Segher Boessenkool Signed-off-by: Andrew Morton --- arch/i386/math-emu/status_w.h | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/i386/math-emu/status_w.h b/arch/i386/math-emu/status_w.h index 78d7b7689dd6..59e73302aa60 100644 --- a/arch/i386/math-emu/status_w.h +++ b/arch/i386/math-emu/status_w.h @@ -48,9 +48,11 @@ #define status_word() \ ((partial_status & ~SW_Top & 0xffff) | ((top << SW_Top_Shift) & SW_Top)) -#define setcc(cc) ({ \ - partial_status &= ~(SW_C0|SW_C1|SW_C2|SW_C3); \ - partial_status |= (cc) & (SW_C0|SW_C1|SW_C2|SW_C3); }) +static inline void setcc(int cc) +{ + partial_status &= ~(SW_C0|SW_C1|SW_C2|SW_C3); + partial_status |= (cc) & (SW_C0|SW_C1|SW_C2|SW_C3); +} #ifdef PECULIAR_486 /* Default, this conveys no information, but an 80486 does it. */ -- cgit v1.2.3 From 2632f01a66d75f4ad59653a7efa506c6ea6845d0 Mon Sep 17 00:00:00 2001 From: takada Date: Tue, 13 Feb 2007 13:26:24 +0100 Subject: [PATCH] i386: support Classic MediaGXm I hope to support "classic" MediaGXm in kernel. The DIR1 register of MediaGXm( or Geode) shows the following values for identify CPU. For example, My MediaGXm shows 0x42. We can read National Semiconductor's datasheet without any NDAs. http://www.national.com/pf/GX/GXLV.html from datasheets: DIR1 0x30 - 0x33 GXm rev. 1.0 - 2.3 0x34 - 0x4f GXm rev. 2.4 - 3.x 0x5x GXm rev. 5.0 - 5.4 0x6x GXLV 0x7x (unknow) 0x8x Gx1 In nsc driver of X, accept 0x30 through 0x82. What will 0x7x mean? Cc: Jordan Crouse Cc: Andi Kleen Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Andi Kleen --- arch/i386/kernel/cpu/cyrix.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/cpu/cyrix.c b/arch/i386/kernel/cpu/cyrix.c index c0c3b59de32c..69b263f5632a 100644 --- a/arch/i386/kernel/cpu/cyrix.c +++ b/arch/i386/kernel/cpu/cyrix.c @@ -285,10 +285,15 @@ static void __cpuinit init_cyrix(struct cpuinfo_x86 *c) /* GXm supports extended cpuid levels 'ala' AMD */ if (c->cpuid_level == 2) { /* Enable cxMMX extensions (GX1 Datasheet 54) */ - setCx86(CX86_CCR7, getCx86(CX86_CCR7)|1); + setCx86(CX86_CCR7, getCx86(CX86_CCR7) | 1); - /* GXlv/GXm/GX1 */ - if((dir1 >= 0x50 && dir1 <= 0x54) || dir1 >= 0x63) + /* + * GXm : 0x30 ... 0x5f GXm datasheet 51 + * GXlv: 0x6x GXlv datasheet 54 + * ? : 0x7x + * GX1 : 0x8x GX1 datasheet 56 + */ + if((0x30 <= dir1 && dir1 <= 0x6f) || (0x80 <=dir1 && dir1 <= 0x8f)) geode_configure(); get_model_name(c); /* get CPU marketing name */ return; -- cgit v1.2.3 From 47a55cd795656d11bb18a7885583361f02a6baa8 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Tue, 13 Feb 2007 13:26:24 +0100 Subject: [PATCH] i386: entry.S END/ENDPROC annotations Annotate i386/kernel/entry.S with END/ENDPROC to assist disassemblers and other analysis tools. Signed-off-by: Jan Beulich Signed-off-by: Andi Kleen Cc: Andi Kleen Signed-off-by: Andrew Morton --- arch/i386/kernel/entry.S | 41 +++++++++++++++++++++++++++++++++++++---- 1 file changed, 37 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/entry.S b/arch/i386/kernel/entry.S index d4b4ffc9eacb..18bddcb8e9e8 100644 --- a/arch/i386/kernel/entry.S +++ b/arch/i386/kernel/entry.S @@ -227,6 +227,7 @@ ENTRY(ret_from_fork) CFI_ADJUST_CFA_OFFSET -4 jmp syscall_exit CFI_ENDPROC +END(ret_from_fork) /* * Return to user mode is not as complex as all this looks, @@ -258,6 +259,7 @@ ENTRY(resume_userspace) # int/exception return? jne work_pending jmp restore_all +END(ret_from_exception) #ifdef CONFIG_PREEMPT ENTRY(resume_kernel) @@ -272,6 +274,7 @@ need_resched: jz restore_all call preempt_schedule_irq jmp need_resched +END(resume_kernel) #endif CFI_ENDPROC @@ -359,6 +362,7 @@ sysenter_past_esp: .align 4 .long 1b,2b .popsection +ENDPROC(sysenter_entry) # system call handler stub ENTRY(system_call) @@ -459,6 +463,7 @@ ldt_ss: CFI_ADJUST_CFA_OFFSET -8 jmp restore_nocheck CFI_ENDPROC +ENDPROC(system_call) # perform work that needs to be done immediately before resumption ALIGN @@ -504,6 +509,7 @@ work_notifysig_v86: xorl %edx, %edx call do_notify_resume jmp resume_userspace_sig +END(work_pending) # perform syscall exit tracing ALIGN @@ -519,6 +525,7 @@ syscall_trace_entry: cmpl $(nr_syscalls), %eax jnae syscall_call jmp syscall_exit +END(syscall_trace_entry) # perform syscall exit tracing ALIGN @@ -532,6 +539,7 @@ syscall_exit_work: movl $1, %edx call do_syscall_trace jmp resume_userspace +END(syscall_exit_work) CFI_ENDPROC RING0_INT_FRAME # can't unwind into user space anyway @@ -542,10 +550,12 @@ syscall_fault: GET_THREAD_INFO(%ebp) movl $-EFAULT,PT_EAX(%esp) jmp resume_userspace +END(syscall_fault) syscall_badsys: movl $-ENOSYS,PT_EAX(%esp) jmp resume_userspace +END(syscall_badsys) CFI_ENDPROC #define FIXUP_ESPFIX_STACK \ @@ -581,9 +591,9 @@ syscall_badsys: ENTRY(interrupt) .text -vector=0 ENTRY(irq_entries_start) RING0_INT_FRAME +vector=0 .rept NR_IRQS ALIGN .if vector @@ -592,11 +602,16 @@ ENTRY(irq_entries_start) 1: pushl $~(vector) CFI_ADJUST_CFA_OFFSET 4 jmp common_interrupt -.data + .previous .long 1b -.text + .text vector=vector+1 .endr +END(irq_entries_start) + +.previous +END(interrupt) +.previous /* * the CPU automatically disables interrupts when executing an IRQ vector, @@ -609,6 +624,7 @@ common_interrupt: movl %esp,%eax call do_IRQ jmp ret_from_intr +ENDPROC(common_interrupt) CFI_ENDPROC #define BUILD_INTERRUPT(name, nr) \ @@ -621,7 +637,8 @@ ENTRY(name) \ movl %esp,%eax; \ call smp_/**/name; \ jmp ret_from_intr; \ - CFI_ENDPROC + CFI_ENDPROC; \ +ENDPROC(name) /* The include is where all of the SMP etc. interrupts come from */ #include "entry_arch.h" @@ -697,6 +714,7 @@ ENTRY(coprocessor_error) CFI_ADJUST_CFA_OFFSET 4 jmp error_code CFI_ENDPROC +END(coprocessor_error) ENTRY(simd_coprocessor_error) RING0_INT_FRAME @@ -706,6 +724,7 @@ ENTRY(simd_coprocessor_error) CFI_ADJUST_CFA_OFFSET 4 jmp error_code CFI_ENDPROC +END(simd_coprocessor_error) ENTRY(device_not_available) RING0_INT_FRAME @@ -726,6 +745,7 @@ device_not_available_emulate: CFI_ADJUST_CFA_OFFSET -4 jmp ret_from_exception CFI_ENDPROC +END(device_not_available) /* * Debug traps and NMI can happen at the one SYSENTER instruction @@ -869,10 +889,12 @@ ENTRY(native_iret) .align 4 .long 1b,iret_exc .previous +END(native_iret) ENTRY(native_irq_enable_sysexit) sti sysexit +END(native_irq_enable_sysexit) #endif KPROBE_ENTRY(int3) @@ -895,6 +917,7 @@ ENTRY(overflow) CFI_ADJUST_CFA_OFFSET 4 jmp error_code CFI_ENDPROC +END(overflow) ENTRY(bounds) RING0_INT_FRAME @@ -904,6 +927,7 @@ ENTRY(bounds) CFI_ADJUST_CFA_OFFSET 4 jmp error_code CFI_ENDPROC +END(bounds) ENTRY(invalid_op) RING0_INT_FRAME @@ -913,6 +937,7 @@ ENTRY(invalid_op) CFI_ADJUST_CFA_OFFSET 4 jmp error_code CFI_ENDPROC +END(invalid_op) ENTRY(coprocessor_segment_overrun) RING0_INT_FRAME @@ -922,6 +947,7 @@ ENTRY(coprocessor_segment_overrun) CFI_ADJUST_CFA_OFFSET 4 jmp error_code CFI_ENDPROC +END(coprocessor_segment_overrun) ENTRY(invalid_TSS) RING0_EC_FRAME @@ -929,6 +955,7 @@ ENTRY(invalid_TSS) CFI_ADJUST_CFA_OFFSET 4 jmp error_code CFI_ENDPROC +END(invalid_TSS) ENTRY(segment_not_present) RING0_EC_FRAME @@ -936,6 +963,7 @@ ENTRY(segment_not_present) CFI_ADJUST_CFA_OFFSET 4 jmp error_code CFI_ENDPROC +END(segment_not_present) ENTRY(stack_segment) RING0_EC_FRAME @@ -943,6 +971,7 @@ ENTRY(stack_segment) CFI_ADJUST_CFA_OFFSET 4 jmp error_code CFI_ENDPROC +END(stack_segment) KPROBE_ENTRY(general_protection) RING0_EC_FRAME @@ -958,6 +987,7 @@ ENTRY(alignment_check) CFI_ADJUST_CFA_OFFSET 4 jmp error_code CFI_ENDPROC +END(alignment_check) ENTRY(divide_error) RING0_INT_FRAME @@ -967,6 +997,7 @@ ENTRY(divide_error) CFI_ADJUST_CFA_OFFSET 4 jmp error_code CFI_ENDPROC +END(divide_error) #ifdef CONFIG_X86_MCE ENTRY(machine_check) @@ -977,6 +1008,7 @@ ENTRY(machine_check) CFI_ADJUST_CFA_OFFSET 4 jmp error_code CFI_ENDPROC +END(machine_check) #endif ENTRY(spurious_interrupt_bug) @@ -987,6 +1019,7 @@ ENTRY(spurious_interrupt_bug) CFI_ADJUST_CFA_OFFSET 4 jmp error_code CFI_ENDPROC +END(spurious_interrupt_bug) ENTRY(kernel_thread_helper) pushl $0 # fake return address for unwinder -- cgit v1.2.3 From f0a5a58aa812b31fd9f197c4ba48245942364eae Mon Sep 17 00:00:00 2001 From: Bob Picco Date: Tue, 13 Feb 2007 13:26:25 +0100 Subject: [PATCH] x86-64: clean up sparsemem memory_present call Eliminate arch specific memory_present call x86_64 NUMA by utilizing sparse_memory_present_with_active_regions. Acked-by: Mel Gorman Signed-off-by: Bob Picco Signed-off-by: Andi Kleen Cc: Andi Kleen Signed-off-by: Andrew Morton --- arch/x86_64/mm/numa.c | 17 ++--------------- 1 file changed, 2 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/mm/numa.c b/arch/x86_64/mm/numa.c index d3f747dd61d3..41b8fb069924 100644 --- a/arch/x86_64/mm/numa.c +++ b/arch/x86_64/mm/numa.c @@ -460,20 +460,6 @@ unsigned long __init numa_free_all_bootmem(void) return pages; } -#ifdef CONFIG_SPARSEMEM -static void __init arch_sparse_init(void) -{ - int i; - - for_each_online_node(i) - memory_present(i, node_start_pfn(i), node_end_pfn(i)); - - sparse_init(); -} -#else -#define arch_sparse_init() do {} while (0) -#endif - void __init paging_init(void) { int i; @@ -483,7 +469,8 @@ void __init paging_init(void) max_zone_pfns[ZONE_DMA32] = MAX_DMA32_PFN; max_zone_pfns[ZONE_NORMAL] = end_pfn; - arch_sparse_init(); + sparse_memory_present_with_active_regions(MAX_NUMNODES); + sparse_init(); for_each_online_node(i) { setup_node_zones(i); -- cgit v1.2.3 From a4af60aa64c828b7c047e7a67b2f896d4bfbd700 Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Tue, 13 Feb 2007 13:26:25 +0100 Subject: [PATCH] i386: Remove unused kernel config option X86_XADD Remove the unused kernel config option X86_XADD, which is unused in any source or header file. Signed-off-by: Robert P. J. Day Signed-off-by: Andi Kleen Cc: Andi Kleen Signed-off-by: Andrew Morton --- arch/i386/Kconfig.cpu | 5 ----- 1 file changed, 5 deletions(-) (limited to 'arch') diff --git a/arch/i386/Kconfig.cpu b/arch/i386/Kconfig.cpu index 2aecfba4ac4f..b99c0e2a4e63 100644 --- a/arch/i386/Kconfig.cpu +++ b/arch/i386/Kconfig.cpu @@ -226,11 +226,6 @@ config X86_CMPXCHG depends on !M386 default y -config X86_XADD - bool - depends on !M386 - default y - config X86_L1_CACHE_SHIFT int default "7" if MPENTIUM4 || X86_GENERIC -- cgit v1.2.3 From ee4eff6ff6cbfc8ce38131058a18802bf6206879 Mon Sep 17 00:00:00 2001 From: Benjamin Romer Date: Tue, 13 Feb 2007 13:26:25 +0100 Subject: [PATCH] x86-64: update IO-APIC dest field to 8-bit for xAPIC On the Unisys ES7000/ONE system, we encountered a problem where performing a kexec reboot or dump on any cell other than cell 0 causes the system timer to stop working, resulting in a hang during timer calibration in the new kernel. We traced the problem to one line of code in disable_IO_APIC(), which needs to restore the timer's IO-APIC configuration before rebooting. The code is currently using the 4-bit physical destination field, rather than using the 8-bit logical destination field, and it cuts off the upper 4 bits of the timer's APIC ID. If we change this to use the logical destination field, the timer works and we can kexec on the upper cells. This was tested on two different cells (0 and 2) in an ES7000/ONE system. For reference, the relevant Intel xAPIC spec is kept at ftp://download.intel.com/design/chipsets/e8501/datashts/30962001.pdf, specifically on page 334. Signed-off-by: Benjamin M Romer Signed-off-by: Andi Kleen Cc: Andi Kleen Cc: "Eric W. Biederman" Cc: Vivek Goyal Signed-off-by: Andrew Morton --- arch/x86_64/kernel/io_apic.c | 24 +++++++++++------------- 1 file changed, 11 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c index 6be6730acb5c..566e64d966c4 100644 --- a/arch/x86_64/kernel/io_apic.c +++ b/arch/x86_64/kernel/io_apic.c @@ -831,7 +831,7 @@ static void __init setup_IO_APIC_irq(int apic, int pin, int idx, int irq) entry.delivery_mode = INT_DELIVERY_MODE; entry.dest_mode = INT_DEST_MODE; entry.mask = 0; /* enable IRQ */ - entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS); + entry.dest = cpu_mask_to_apicid(TARGET_CPUS); entry.trigger = irq_trigger(idx); entry.polarity = irq_polarity(idx); @@ -839,7 +839,7 @@ static void __init setup_IO_APIC_irq(int apic, int pin, int idx, int irq) if (irq_trigger(idx)) { entry.trigger = 1; entry.mask = 1; - entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS); + entry.dest = cpu_mask_to_apicid(TARGET_CPUS); } if (!apic && !IO_APIC_IRQ(irq)) @@ -851,7 +851,7 @@ static void __init setup_IO_APIC_irq(int apic, int pin, int idx, int irq) if (vector < 0) return; - entry.dest.logical.logical_dest = cpu_mask_to_apicid(mask); + entry.dest = cpu_mask_to_apicid(mask); entry.vector = vector; ioapic_register_intr(irq, vector, IOAPIC_AUTO); @@ -920,7 +920,7 @@ static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, in */ entry.dest_mode = INT_DEST_MODE; entry.mask = 0; /* unmask IRQ now */ - entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS); + entry.dest = cpu_mask_to_apicid(TARGET_CPUS); entry.delivery_mode = INT_DELIVERY_MODE; entry.polarity = 0; entry.trigger = 0; @@ -1020,18 +1020,17 @@ void __apicdebuginit print_IO_APIC(void) printk(KERN_DEBUG ".... IRQ redirection table:\n"); - printk(KERN_DEBUG " NR Log Phy Mask Trig IRR Pol" - " Stat Dest Deli Vect: \n"); + printk(KERN_DEBUG " NR Dst Mask Trig IRR Pol" + " Stat Dmod Deli Vect: \n"); for (i = 0; i <= reg_01.bits.entries; i++) { struct IO_APIC_route_entry entry; entry = ioapic_read_entry(apic, i); - printk(KERN_DEBUG " %02x %03X %02X ", + printk(KERN_DEBUG " %02x %03X ", i, - entry.dest.logical.logical_dest, - entry.dest.physical.physical_dest + entry.dest ); printk("%1d %1d %1d %1d %1d %1d %1d %02X\n", @@ -1293,8 +1292,7 @@ void disable_IO_APIC(void) entry.dest_mode = 0; /* Physical */ entry.delivery_mode = dest_ExtINT; /* ExtInt */ entry.vector = 0; - entry.dest.physical.physical_dest = - GET_APIC_ID(apic_read(APIC_ID)); + entry.dest = GET_APIC_ID(apic_read(APIC_ID)); /* * Add it to the IO-APIC irq-routing table: @@ -1556,7 +1554,7 @@ static inline void unlock_ExtINT_logic(void) entry1.dest_mode = 0; /* physical delivery */ entry1.mask = 0; /* unmask IRQ now */ - entry1.dest.physical.physical_dest = hard_smp_processor_id(); + entry1.dest = hard_smp_processor_id(); entry1.delivery_mode = dest_ExtINT; entry1.polarity = entry0.polarity; entry1.trigger = 0; @@ -2131,7 +2129,7 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int triggering, int p entry.delivery_mode = INT_DELIVERY_MODE; entry.dest_mode = INT_DEST_MODE; - entry.dest.logical.logical_dest = cpu_mask_to_apicid(mask); + entry.dest = cpu_mask_to_apicid(mask); entry.trigger = triggering; entry.polarity = polarity; entry.mask = 1; /* Disabled (masked) */ -- cgit v1.2.3 From 3e94fb8f54c5305ed472e0867cd67d53e05bfb64 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 13 Feb 2007 13:26:25 +0100 Subject: [PATCH] x86-64: avoid warning message livelock I've seen my box paralyzed by an endless spew of rtc: lost some interrupts at 1024Hz. messages on the serial console. What seems to be happening is that something real causes an interrupt to be lost and triggers the message. But then printing the message to the serial console (from the hpet interrupt handler) takes more than 1/1024th of a second, and then some more interrupts are lost, so the message triggers again.... Fix this by adding a printk_ratelimit() before printing the warning. Signed-off-by: Roland Dreier Signed-off-by: Andrew Morton Signed-off-by: Andi Kleen --- arch/x86_64/kernel/time.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c index 9c7fba30dac1..3cc6886f1fb7 100644 --- a/arch/x86_64/kernel/time.c +++ b/arch/x86_64/kernel/time.c @@ -1226,8 +1226,9 @@ static void hpet_rtc_timer_reinit(void) if (PIE_on) PIE_count += lost_ints; - printk(KERN_WARNING "rtc: lost some interrupts at %ldHz.\n", - hpet_rtc_int_freq); + if (printk_ratelimit()) + printk(KERN_WARNING "rtc: lost some interrupts at %ldHz.\n", + hpet_rtc_int_freq); } } -- cgit v1.2.3 From 8469adde5932f2879688fd5f183a6e9dadbf7b9f Mon Sep 17 00:00:00 2001 From: Evgeniy Polyakov Date: Tue, 13 Feb 2007 13:26:25 +0100 Subject: [PATCH] x86-64: Minor patch for compilation warning in x86_64 signal code If DEBUG_SIG is enbaled in source code, ia32_signal.c compiles with warning due to wrong format string. Attached patch fixes that. It is quite minor update, since by default DEBUG_SIG is not enabled and can not be turned on without code modification. Signed-off-by: Evgeniy Polyakov Signed-off-by: Andi Kleen Cc: Andi Kleen Signed-off-by: Andrew Morton --- arch/x86_64/ia32/ia32_signal.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/ia32/ia32_signal.c b/arch/x86_64/ia32/ia32_signal.c index ff499ef2a1ba..490f7c1b7c84 100644 --- a/arch/x86_64/ia32/ia32_signal.c +++ b/arch/x86_64/ia32/ia32_signal.c @@ -495,7 +495,7 @@ int ia32_setup_frame(int sig, struct k_sigaction *ka, ptrace_notify(SIGTRAP); #if DEBUG_SIG - printk("SIG deliver (%s:%d): sp=%p pc=%p ra=%p\n", + printk("SIG deliver (%s:%d): sp=%p pc=%lx ra=%u\n", current->comm, current->pid, frame, regs->rip, frame->pretcode); #endif @@ -601,7 +601,7 @@ int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, ptrace_notify(SIGTRAP); #if DEBUG_SIG - printk("SIG deliver (%s:%d): sp=%p pc=%p ra=%p\n", + printk("SIG deliver (%s:%d): sp=%p pc=%lx ra=%u\n", current->comm, current->pid, frame, regs->rip, frame->pretcode); #endif -- cgit v1.2.3 From 86c418374223be3f328b5522545196db02c8ceda Mon Sep 17 00:00:00 2001 From: Chuck Ebbert Date: Tue, 13 Feb 2007 13:26:25 +0100 Subject: [PATCH] i386: add option to show more code in oops reports Sometimes developers need to see more object code in an oops report, e.g. when kernel may be corrupted at runtime. Add the "code_bytes" option for this. Signed-off-by: Chuck Ebbert Signed-off-by: Andi Kleen Cc: Andi Kleen Signed-off-by: Andrew Morton --- arch/i386/kernel/traps.c | 20 ++++++++++++++++---- 1 file changed, 16 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/traps.c b/arch/i386/kernel/traps.c index 4ec21037a361..af0d3f70a817 100644 --- a/arch/i386/kernel/traps.c +++ b/arch/i386/kernel/traps.c @@ -94,6 +94,7 @@ asmlinkage void spurious_interrupt_bug(void); asmlinkage void machine_check(void); int kstack_depth_to_print = 24; +static unsigned int code_bytes = 64; ATOMIC_NOTIFIER_HEAD(i386die_chain); int register_die_notifier(struct notifier_block *nb) @@ -325,7 +326,8 @@ void show_registers(struct pt_regs *regs) */ if (in_kernel) { u8 *eip; - int code_bytes = 64; + unsigned int code_prologue = code_bytes * 43 / 64; + unsigned int code_len = code_bytes; unsigned char c; printk("\n" KERN_EMERG "Stack: "); @@ -333,14 +335,14 @@ void show_registers(struct pt_regs *regs) printk(KERN_EMERG "Code: "); - eip = (u8 *)regs->eip - 43; + eip = (u8 *)regs->eip - code_prologue; if (eip < (u8 *)PAGE_OFFSET || probe_kernel_address(eip, c)) { /* try starting at EIP */ eip = (u8 *)regs->eip; - code_bytes = 32; + code_len = code_len - code_prologue + 1; } - for (i = 0; i < code_bytes; i++, eip++) { + for (i = 0; i < code_len; i++, eip++) { if (eip < (u8 *)PAGE_OFFSET || probe_kernel_address(eip, c)) { printk(" Bad EIP value."); @@ -1192,3 +1194,13 @@ static int __init kstack_setup(char *s) return 1; } __setup("kstack=", kstack_setup); + +static int __init code_bytes_setup(char *s) +{ + code_bytes = simple_strtoul(s, NULL, 0); + if (code_bytes > 8192) + code_bytes = 8192; + + return 1; +} +__setup("code_bytes=", code_bytes_setup); -- cgit v1.2.3 From bcde1ebb81c51ebdfa02887703e4d21c1bbc2431 Mon Sep 17 00:00:00 2001 From: TAKADA Yoshihito Date: Tue, 13 Feb 2007 13:26:25 +0100 Subject: [PATCH] i386: geode configuration fixes Original code doesn't write back to CCR4 register. This patch reflects a value of a register. Cc: Jordan Crouse Acked-by: Alan Cox Cc: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Andi Kleen --- arch/i386/kernel/cpu/cyrix.c | 21 ++++++++++----------- 1 file changed, 10 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/cpu/cyrix.c b/arch/i386/kernel/cpu/cyrix.c index 69b263f5632a..408a74e5c424 100644 --- a/arch/i386/kernel/cpu/cyrix.c +++ b/arch/i386/kernel/cpu/cyrix.c @@ -161,19 +161,19 @@ static void __cpuinit set_cx86_inc(void) static void __cpuinit geode_configure(void) { unsigned long flags; - u8 ccr3, ccr4; + u8 ccr3; local_irq_save(flags); /* Suspend on halt power saving and enable #SUSP pin */ setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x88); ccr3 = getCx86(CX86_CCR3); - setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* Enable */ - - ccr4 = getCx86(CX86_CCR4); - ccr4 |= 0x38; /* FPU fast, DTE cache, Mem bypass */ + setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */ - setCx86(CX86_CCR3, ccr3); + + /* FPU fast, DTE cache, Mem bypass */ + setCx86(CX86_CCR4, getCx86(CX86_CCR4) | 0x38); + setCx86(CX86_CCR3, ccr3); /* disable MAPEN */ set_cx86_memwb(); set_cx86_reorder(); @@ -420,15 +420,14 @@ static void __cpuinit cyrix_identify(struct cpuinfo_x86 * c) if (dir0 == 5 || dir0 == 3) { - unsigned char ccr3, ccr4; + unsigned char ccr3; unsigned long flags; printk(KERN_INFO "Enabling CPUID on Cyrix processor.\n"); local_irq_save(flags); ccr3 = getCx86(CX86_CCR3); - setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */ - ccr4 = getCx86(CX86_CCR4); - setCx86(CX86_CCR4, ccr4 | 0x80); /* enable cpuid */ - setCx86(CX86_CCR3, ccr3); /* disable MAPEN */ + setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */ + setCx86(CX86_CCR4, getCx86(CX86_CCR4) | 0x80); /* enable cpuid */ + setCx86(CX86_CCR3, ccr3); /* disable MAPEN */ local_irq_restore(flags); } } -- cgit v1.2.3 From 2fb12a9bca5ad9aa6dcd2c639b4a7656a8843ef8 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Tue, 13 Feb 2007 13:26:25 +0100 Subject: [PATCH] x86-64: survive having no irq mapping for a vector Occasionally the kernel has bugs that result in no irq being found for a given cpu vector. If we acknowledge the irq the system has a good chance of continuing even though we dropped an irq message. If we continue to simply print a message and not acknowledge the irq the system is likely to become non-responsive shortly there after. AK: Fixed compilation for UP kernels Signed-off-by: Eric W. Biederman Signed-off-by: Andi Kleen Cc: "Luigi Genoni" Cc: Andi Kleen Signed-off-by: Andrew Morton --- arch/x86_64/kernel/irq.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/irq.c b/arch/x86_64/kernel/irq.c index 0c06af6c13bc..3bc30d2c13d3 100644 --- a/arch/x86_64/kernel/irq.c +++ b/arch/x86_64/kernel/irq.c @@ -18,6 +18,7 @@ #include #include #include +#include atomic_t irq_err_count; @@ -120,9 +121,14 @@ asmlinkage unsigned int do_IRQ(struct pt_regs *regs) if (likely(irq < NR_IRQS)) generic_handle_irq(irq); - else if (printk_ratelimit()) - printk(KERN_EMERG "%s: %d.%d No irq handler for vector\n", - __func__, smp_processor_id(), vector); + else { + if (!disable_apic) + ack_APIC_irq(); + + if (printk_ratelimit()) + printk(KERN_EMERG "%s: %d.%d No irq handler for vector\n", + __func__, smp_processor_id(), vector); + } irq_exit(); -- cgit v1.2.3 From 1a1eecd1c272f704f135a7d8060ec3da1c201b4c Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Tue, 13 Feb 2007 13:26:25 +0100 Subject: [PATCH] i386: Remove fastcall in paravirt.[ch] Not needed because fastcall is always default now Signed-off-by: Andi Kleen --- arch/i386/kernel/paravirt.c | 102 ++++++++++++++++++++++---------------------- 1 file changed, 51 insertions(+), 51 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/paravirt.c b/arch/i386/kernel/paravirt.c index 2003733310dc..ebe82552ad30 100644 --- a/arch/i386/kernel/paravirt.c +++ b/arch/i386/kernel/paravirt.c @@ -92,7 +92,7 @@ static unsigned native_patch(u8 type, u16 clobbers, void *insns, unsigned len) return insn_len; } -static fastcall unsigned long native_get_debugreg(int regno) +static unsigned long native_get_debugreg(int regno) { unsigned long val = 0; /* Damn you, gcc! */ @@ -115,7 +115,7 @@ static fastcall unsigned long native_get_debugreg(int regno) return val; } -static fastcall void native_set_debugreg(int regno, unsigned long value) +static void native_set_debugreg(int regno, unsigned long value) { switch (regno) { case 0: @@ -146,55 +146,55 @@ void init_IRQ(void) paravirt_ops.init_IRQ(); } -static fastcall void native_clts(void) +static void native_clts(void) { asm volatile ("clts"); } -static fastcall unsigned long native_read_cr0(void) +static unsigned long native_read_cr0(void) { unsigned long val; asm volatile("movl %%cr0,%0\n\t" :"=r" (val)); return val; } -static fastcall void native_write_cr0(unsigned long val) +static void native_write_cr0(unsigned long val) { asm volatile("movl %0,%%cr0": :"r" (val)); } -static fastcall unsigned long native_read_cr2(void) +static unsigned long native_read_cr2(void) { unsigned long val; asm volatile("movl %%cr2,%0\n\t" :"=r" (val)); return val; } -static fastcall void native_write_cr2(unsigned long val) +static void native_write_cr2(unsigned long val) { asm volatile("movl %0,%%cr2": :"r" (val)); } -static fastcall unsigned long native_read_cr3(void) +static unsigned long native_read_cr3(void) { unsigned long val; asm volatile("movl %%cr3,%0\n\t" :"=r" (val)); return val; } -static fastcall void native_write_cr3(unsigned long val) +static void native_write_cr3(unsigned long val) { asm volatile("movl %0,%%cr3": :"r" (val)); } -static fastcall unsigned long native_read_cr4(void) +static unsigned long native_read_cr4(void) { unsigned long val; asm volatile("movl %%cr4,%0\n\t" :"=r" (val)); return val; } -static fastcall unsigned long native_read_cr4_safe(void) +static unsigned long native_read_cr4_safe(void) { unsigned long val; /* This could fault if %cr4 does not exist */ @@ -207,51 +207,51 @@ static fastcall unsigned long native_read_cr4_safe(void) return val; } -static fastcall void native_write_cr4(unsigned long val) +static void native_write_cr4(unsigned long val) { asm volatile("movl %0,%%cr4": :"r" (val)); } -static fastcall unsigned long native_save_fl(void) +static unsigned long native_save_fl(void) { unsigned long f; asm volatile("pushfl ; popl %0":"=g" (f): /* no input */); return f; } -static fastcall void native_restore_fl(unsigned long f) +static void native_restore_fl(unsigned long f) { asm volatile("pushl %0 ; popfl": /* no output */ :"g" (f) :"memory", "cc"); } -static fastcall void native_irq_disable(void) +static void native_irq_disable(void) { asm volatile("cli": : :"memory"); } -static fastcall void native_irq_enable(void) +static void native_irq_enable(void) { asm volatile("sti": : :"memory"); } -static fastcall void native_safe_halt(void) +static void native_safe_halt(void) { asm volatile("sti; hlt": : :"memory"); } -static fastcall void native_halt(void) +static void native_halt(void) { asm volatile("hlt": : :"memory"); } -static fastcall void native_wbinvd(void) +static void native_wbinvd(void) { asm volatile("wbinvd": : :"memory"); } -static fastcall unsigned long long native_read_msr(unsigned int msr, int *err) +static unsigned long long native_read_msr(unsigned int msr, int *err) { unsigned long long val; @@ -270,7 +270,7 @@ static fastcall unsigned long long native_read_msr(unsigned int msr, int *err) return val; } -static fastcall int native_write_msr(unsigned int msr, unsigned long long val) +static int native_write_msr(unsigned int msr, unsigned long long val) { int err; asm volatile("2: wrmsr ; xorl %0,%0\n" @@ -288,53 +288,53 @@ static fastcall int native_write_msr(unsigned int msr, unsigned long long val) return err; } -static fastcall unsigned long long native_read_tsc(void) +static unsigned long long native_read_tsc(void) { unsigned long long val; asm volatile("rdtsc" : "=A" (val)); return val; } -static fastcall unsigned long long native_read_pmc(void) +static unsigned long long native_read_pmc(void) { unsigned long long val; asm volatile("rdpmc" : "=A" (val)); return val; } -static fastcall void native_load_tr_desc(void) +static void native_load_tr_desc(void) { asm volatile("ltr %w0"::"q" (GDT_ENTRY_TSS*8)); } -static fastcall void native_load_gdt(const struct Xgt_desc_struct *dtr) +static void native_load_gdt(const struct Xgt_desc_struct *dtr) { asm volatile("lgdt %0"::"m" (*dtr)); } -static fastcall void native_load_idt(const struct Xgt_desc_struct *dtr) +static void native_load_idt(const struct Xgt_desc_struct *dtr) { asm volatile("lidt %0"::"m" (*dtr)); } -static fastcall void native_store_gdt(struct Xgt_desc_struct *dtr) +static void native_store_gdt(struct Xgt_desc_struct *dtr) { asm ("sgdt %0":"=m" (*dtr)); } -static fastcall void native_store_idt(struct Xgt_desc_struct *dtr) +static void native_store_idt(struct Xgt_desc_struct *dtr) { asm ("sidt %0":"=m" (*dtr)); } -static fastcall unsigned long native_store_tr(void) +static unsigned long native_store_tr(void) { unsigned long tr; asm ("str %0":"=r" (tr)); return tr; } -static fastcall void native_load_tls(struct thread_struct *t, unsigned int cpu) +static void native_load_tls(struct thread_struct *t, unsigned int cpu) { #define C(i) get_cpu_gdt_table(cpu)[GDT_ENTRY_TLS_MIN + i] = t->tls_array[i] C(0); C(1); C(2); @@ -348,22 +348,22 @@ static inline void native_write_dt_entry(void *dt, int entry, u32 entry_low, u32 lp[1] = entry_high; } -static fastcall void native_write_ldt_entry(void *dt, int entrynum, u32 low, u32 high) +static void native_write_ldt_entry(void *dt, int entrynum, u32 low, u32 high) { native_write_dt_entry(dt, entrynum, low, high); } -static fastcall void native_write_gdt_entry(void *dt, int entrynum, u32 low, u32 high) +static void native_write_gdt_entry(void *dt, int entrynum, u32 low, u32 high) { native_write_dt_entry(dt, entrynum, low, high); } -static fastcall void native_write_idt_entry(void *dt, int entrynum, u32 low, u32 high) +static void native_write_idt_entry(void *dt, int entrynum, u32 low, u32 high) { native_write_dt_entry(dt, entrynum, low, high); } -static fastcall void native_load_esp0(struct tss_struct *tss, +static void native_load_esp0(struct tss_struct *tss, struct thread_struct *thread) { tss->esp0 = thread->esp0; @@ -375,12 +375,12 @@ static fastcall void native_load_esp0(struct tss_struct *tss, } } -static fastcall void native_io_delay(void) +static void native_io_delay(void) { asm volatile("outb %al,$0x80"); } -static fastcall void native_flush_tlb(void) +static void native_flush_tlb(void) { __native_flush_tlb(); } @@ -389,49 +389,49 @@ static fastcall void native_flush_tlb(void) * Global pages have to be flushed a bit differently. Not a real * performance problem because this does not happen often. */ -static fastcall void native_flush_tlb_global(void) +static void native_flush_tlb_global(void) { __native_flush_tlb_global(); } -static fastcall void native_flush_tlb_single(u32 addr) +static void native_flush_tlb_single(u32 addr) { __native_flush_tlb_single(addr); } #ifndef CONFIG_X86_PAE -static fastcall void native_set_pte(pte_t *ptep, pte_t pteval) +static void native_set_pte(pte_t *ptep, pte_t pteval) { *ptep = pteval; } -static fastcall void native_set_pte_at(struct mm_struct *mm, u32 addr, pte_t *ptep, pte_t pteval) +static void native_set_pte_at(struct mm_struct *mm, u32 addr, pte_t *ptep, pte_t pteval) { *ptep = pteval; } -static fastcall void native_set_pmd(pmd_t *pmdp, pmd_t pmdval) +static void native_set_pmd(pmd_t *pmdp, pmd_t pmdval) { *pmdp = pmdval; } #else /* CONFIG_X86_PAE */ -static fastcall void native_set_pte(pte_t *ptep, pte_t pte) +static void native_set_pte(pte_t *ptep, pte_t pte) { ptep->pte_high = pte.pte_high; smp_wmb(); ptep->pte_low = pte.pte_low; } -static fastcall void native_set_pte_at(struct mm_struct *mm, u32 addr, pte_t *ptep, pte_t pte) +static void native_set_pte_at(struct mm_struct *mm, u32 addr, pte_t *ptep, pte_t pte) { ptep->pte_high = pte.pte_high; smp_wmb(); ptep->pte_low = pte.pte_low; } -static fastcall void native_set_pte_present(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte) +static void native_set_pte_present(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte) { ptep->pte_low = 0; smp_wmb(); @@ -440,29 +440,29 @@ static fastcall void native_set_pte_present(struct mm_struct *mm, unsigned long ptep->pte_low = pte.pte_low; } -static fastcall void native_set_pte_atomic(pte_t *ptep, pte_t pteval) +static void native_set_pte_atomic(pte_t *ptep, pte_t pteval) { set_64bit((unsigned long long *)ptep,pte_val(pteval)); } -static fastcall void native_set_pmd(pmd_t *pmdp, pmd_t pmdval) +static void native_set_pmd(pmd_t *pmdp, pmd_t pmdval) { set_64bit((unsigned long long *)pmdp,pmd_val(pmdval)); } -static fastcall void native_set_pud(pud_t *pudp, pud_t pudval) +static void native_set_pud(pud_t *pudp, pud_t pudval) { *pudp = pudval; } -static fastcall void native_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) +static void native_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) { ptep->pte_low = 0; smp_wmb(); ptep->pte_high = 0; } -static fastcall void native_pmd_clear(pmd_t *pmd) +static void native_pmd_clear(pmd_t *pmd) { u32 *tmp = (u32 *)pmd; *tmp = 0; @@ -472,8 +472,8 @@ static fastcall void native_pmd_clear(pmd_t *pmd) #endif /* CONFIG_X86_PAE */ /* These are in entry.S */ -extern fastcall void native_iret(void); -extern fastcall void native_irq_enable_sysexit(void); +extern void native_iret(void); +extern void native_irq_enable_sysexit(void); static int __init print_banner(void) { -- cgit v1.2.3 From f790cd30d002949a12623b2a8cec4d4e5a8887ef Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Tue, 13 Feb 2007 13:26:25 +0100 Subject: [PATCH] x86: Add new CPUID bits for AMD Family 10 CPUs in /proc/cpuinfo Just various new acronyms. The new popcnt bit is in the middle of Intel space. This looks a little weird, but I've been assured it's ok. Also I fixed RDTSCP for i386 which was at the wrong place. For i386 and x86-64. Signed-off-by: Andi Kleen --- arch/i386/kernel/cpu/proc.c | 14 +++++++++----- arch/x86_64/kernel/setup.c | 14 ++++++++++---- 2 files changed, 19 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/cpu/proc.c b/arch/i386/kernel/cpu/proc.c index 6624d8583c42..47e3ebbfb28d 100644 --- a/arch/i386/kernel/cpu/proc.c +++ b/arch/i386/kernel/cpu/proc.c @@ -29,7 +29,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, "syscall", NULL, NULL, NULL, NULL, NULL, NULL, NULL, "mp", "nx", NULL, "mmxext", NULL, - NULL, "fxsr_opt", "rdtscp", NULL, NULL, "lm", "3dnowext", "3dnow", + NULL, "fxsr_opt", "pdpe1gb", "rdtscp", NULL, "lm", "3dnowext", "3dnow", /* Transmeta-defined */ "recovery", "longrun", NULL, "lrti", NULL, NULL, NULL, NULL, @@ -47,7 +47,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) /* Intel-defined (#2) */ "pni", NULL, NULL, "monitor", "ds_cpl", "vmx", "smx", "est", "tm2", "ssse3", "cid", NULL, NULL, "cx16", "xtpr", NULL, - NULL, NULL, "dca", NULL, NULL, NULL, NULL, NULL, + NULL, NULL, "dca", NULL, NULL, NULL, NULL, "popcnt", NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, /* VIA/Cyrix/Centaur-defined */ @@ -57,8 +57,9 @@ static int show_cpuinfo(struct seq_file *m, void *v) NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, /* AMD-defined (#2) */ - "lahf_lm", "cmp_legacy", "svm", NULL, "cr8legacy", NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + "lahf_lm", "cmp_legacy", "svm", "extapic", "cr8legacy", "abm", + "sse4a", "misalignsse", + "3dnowprefetch", "osvw", "ibs", NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, }; @@ -69,8 +70,11 @@ static int show_cpuinfo(struct seq_file *m, void *v) "ttp", /* thermal trip */ "tm", "stc", + "100mhzsteps", + "hwpstate", NULL, - /* nothing */ /* constant_tsc - moved to flags */ + NULL, /* constant_tsc - moved to flags */ + /* nothing */ }; struct cpuinfo_x86 *c = v; int i, n = c - cpu_data; diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c index e82c1a155af5..13daaf359d21 100644 --- a/arch/x86_64/kernel/setup.c +++ b/arch/x86_64/kernel/setup.c @@ -942,7 +942,8 @@ static int show_cpuinfo(struct seq_file *m, void *v) NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, "syscall", NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, "nx", NULL, "mmxext", NULL, - NULL, "fxsr_opt", NULL, "rdtscp", NULL, "lm", "3dnowext", "3dnow", + NULL, "fxsr_opt", "pdpe1gb", "rdtscp", NULL, "lm", + "3dnowext", "3dnow", /* Transmeta-defined */ "recovery", "longrun", NULL, "lrti", NULL, NULL, NULL, NULL, @@ -960,7 +961,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) /* Intel-defined (#2) */ "pni", NULL, NULL, "monitor", "ds_cpl", "vmx", "smx", "est", "tm2", "ssse3", "cid", NULL, NULL, "cx16", "xtpr", NULL, - NULL, NULL, "dca", NULL, NULL, NULL, NULL, NULL, + NULL, NULL, "dca", NULL, NULL, NULL, NULL, "popcnt", NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, /* VIA/Cyrix/Centaur-defined */ @@ -970,8 +971,10 @@ static int show_cpuinfo(struct seq_file *m, void *v) NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, /* AMD-defined (#2) */ - "lahf_lm", "cmp_legacy", "svm", NULL, "cr8_legacy", NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + "lahf_lm", "cmp_legacy", "svm", "extapic", "cr8_legacy", + "altmovcr8", "abm", "sse4a", + "misalignsse", "3dnowprefetch", + "osvw", "ibs", NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, }; @@ -982,6 +985,9 @@ static int show_cpuinfo(struct seq_file *m, void *v) "ttp", /* thermal trip */ "tm", "stc", + "100mhzsteps", + "hwpstate", + NULL, /* tsc invariant mapped to constant_tsc */ NULL, /* nothing */ /* constant_tsc - moved to flags */ }; -- cgit v1.2.3 From 0a4599c894d880763eec6cb93f6c246dac6c3269 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Tue, 13 Feb 2007 13:26:25 +0100 Subject: [PATCH] x86: Enable NMI watchdog for AMD Family 0x10 CPUs For i386/x86-64. Straight forward -- just reuse the Family 0xf code. Signed-off-by: Andi Kleen --- arch/i386/kernel/nmi.c | 6 ++++-- arch/x86_64/kernel/nmi.c | 2 +- 2 files changed, 5 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/nmi.c b/arch/i386/kernel/nmi.c index b11abacc5cfd..5d8a07c20281 100644 --- a/arch/i386/kernel/nmi.c +++ b/arch/i386/kernel/nmi.c @@ -185,7 +185,8 @@ static __cpuinit inline int nmi_known_cpu(void) { switch (boot_cpu_data.x86_vendor) { case X86_VENDOR_AMD: - return ((boot_cpu_data.x86 == 15) || (boot_cpu_data.x86 == 6)); + return ((boot_cpu_data.x86 == 15) || (boot_cpu_data.x86 == 6) + || (boot_cpu_data.x86 == 16)); case X86_VENDOR_INTEL: if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) return 1; @@ -817,7 +818,8 @@ void setup_apic_nmi_watchdog (void *unused) if (nmi_watchdog == NMI_LOCAL_APIC) { switch (boot_cpu_data.x86_vendor) { case X86_VENDOR_AMD: - if (boot_cpu_data.x86 != 6 && boot_cpu_data.x86 != 15) + if (boot_cpu_data.x86 != 6 && boot_cpu_data.x86 != 15 && + boot_cpu_data.x86 != 16) return; if (!setup_k7_watchdog()) return; diff --git a/arch/x86_64/kernel/nmi.c b/arch/x86_64/kernel/nmi.c index 269fe585e71e..486f4c61a948 100644 --- a/arch/x86_64/kernel/nmi.c +++ b/arch/x86_64/kernel/nmi.c @@ -172,7 +172,7 @@ static __cpuinit inline int nmi_known_cpu(void) { switch (boot_cpu_data.x86_vendor) { case X86_VENDOR_AMD: - return boot_cpu_data.x86 == 15; + return boot_cpu_data.x86 == 15 || boot_cpu_data.x86 == 16; case X86_VENDOR_INTEL: if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) return 1; -- cgit v1.2.3 From 2ba1ff2b796746722fc4fe8bdcd1f30a834e3d0a Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Tue, 13 Feb 2007 13:26:25 +0100 Subject: [PATCH] i386: Fix warning in microcode.c MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix bogus gcc warning linux/arch/i386/kernel/microcode.c:387: warning: ‘new_mc’ may be used uninitialized in this function Signed-off-by: Andi Kleen --- arch/i386/kernel/microcode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/i386/kernel/microcode.c b/arch/i386/kernel/microcode.c index 381252bae3d8..b8f16633a6ec 100644 --- a/arch/i386/kernel/microcode.c +++ b/arch/i386/kernel/microcode.c @@ -384,7 +384,7 @@ static int do_microcode_update (void) { long cursor = 0; int error = 0; - void *new_mc; + void *new_mc = NULL; int cpu; cpumask_t old; -- cgit v1.2.3 From 7de6d3618b09c39fdaa6125e23fcf465a65bc266 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Tue, 13 Feb 2007 13:26:25 +0100 Subject: [PATCH] i386: Fix warning in cpu initialization MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix bogus warning linux/arch/i386/kernel/cpu/transmeta.c:12: warning: ‘cpu_freq’ may be used uninitialized in this function Signed-off-by: Andi Kleen --- arch/i386/kernel/cpu/transmeta.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/i386/kernel/cpu/transmeta.c b/arch/i386/kernel/cpu/transmeta.c index b536e810d27e..5678d46863c6 100644 --- a/arch/i386/kernel/cpu/transmeta.c +++ b/arch/i386/kernel/cpu/transmeta.c @@ -9,7 +9,7 @@ static void __cpuinit init_transmeta(struct cpuinfo_x86 *c) { unsigned int cap_mask, uk, max, dummy; unsigned int cms_rev1, cms_rev2; - unsigned int cpu_rev, cpu_freq, cpu_flags, new_cpu_rev; + unsigned int cpu_rev, cpu_freq = 0, cpu_flags, new_cpu_rev; char cpu_info[65]; get_model_name(c); /* Same as AMD/Cyrix */ -- cgit v1.2.3 From 120fad72401ebec2a126c16cc48f56c28f3eefe2 Mon Sep 17 00:00:00 2001 From: Alan Date: Tue, 13 Feb 2007 13:26:26 +0100 Subject: [PATCH] i386: Fix Cyrix MediaGX detection The old Cyrix 5520 CPU detection code relied upon the PCI layer setup being done earlier than the CPU setup, which is no longer true. Fortunately we know that if the processor is a MediaGX we can do type 1 pci config accesses to check the companion chip. We thus do those directly and from this find the 5520 and implement the workarounds for the timer problem Original report from takada@mbf.nifty.com, I sent a proposed patch which Takara then corrected, tested and sent back to the list on 10th January. Submitting for merging as it seems to have been missed AK: Changed to use pci-direct.h and fix warning for !CONFIG_PCI (later AK: originally from akpm) Signed-off-by: Alan Cox Signed-off-by: Andi Kleen Cc: Andi Kleen Cc: Cc: Jordan Crouse Signed-off-by: Andrew Morton --- arch/i386/kernel/cpu/cyrix.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/cpu/cyrix.c b/arch/i386/kernel/cpu/cyrix.c index 408a74e5c424..de27bd07bc9c 100644 --- a/arch/i386/kernel/cpu/cyrix.c +++ b/arch/i386/kernel/cpu/cyrix.c @@ -6,6 +6,7 @@ #include #include #include +#include #include "cpu.h" @@ -183,14 +184,6 @@ static void __cpuinit geode_configure(void) } -#ifdef CONFIG_PCI -static struct pci_device_id __cpuinitdata cyrix_55x0[] = { - { PCI_DEVICE(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5510) }, - { PCI_DEVICE(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520) }, - { }, -}; -#endif - static void __cpuinit init_cyrix(struct cpuinfo_x86 *c) { unsigned char dir0, dir0_msn, dir0_lsn, dir1 = 0; @@ -258,6 +251,8 @@ static void __cpuinit init_cyrix(struct cpuinfo_x86 *c) case 4: /* MediaGX/GXm or Geode GXM/GXLV/GX1 */ #ifdef CONFIG_PCI + { + u32 vendor, device; /* It isn't really a PCI quirk directly, but the cure is the same. The MediaGX has deep magic SMM stuff that handles the SB emulation. It thows away the fifo on disable_dma() which @@ -273,12 +268,19 @@ static void __cpuinit init_cyrix(struct cpuinfo_x86 *c) printk(KERN_INFO "Working around Cyrix MediaGX virtual DMA bugs.\n"); isa_dma_bridge_buggy = 2; + /* We do this before the PCI layer is running. However we + are safe here as we know the bridge must be a Cyrix + companion and must be present */ + vendor = read_pci_config_16(0, 0, 0x12, PCI_VENDOR_ID); + device = read_pci_config_16(0, 0, 0x12, PCI_DEVICE_ID); /* * The 5510/5520 companion chips have a funky PIT. */ - if (pci_dev_present(cyrix_55x0)) + if (vendor == PCI_VENDOR_ID_CYRIX && + (device == PCI_DEVICE_ID_CYRIX_5510 || device == PCI_DEVICE_ID_CYRIX_5520)) pit_latch_buggy = 1; + } #endif c->x86_cache_size=16; /* Yep 16K integrated cache thats it */ -- cgit v1.2.3 From 9fbbd4dd17d0712054368e5e939e28b2456bfe1b Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Tue, 13 Feb 2007 13:26:26 +0100 Subject: [PATCH] x86: Don't require the vDSO for handling a.out signals and in other strange binfmts. vDSO is not necessarily mapped there. Signed-off-by: Andi Kleen --- arch/i386/kernel/signal.c | 6 +++++- arch/x86_64/ia32/ia32_signal.c | 7 ++++++- 2 files changed, 11 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/signal.c b/arch/i386/kernel/signal.c index 8f4afcc7d2ab..4f99e870c986 100644 --- a/arch/i386/kernel/signal.c +++ b/arch/i386/kernel/signal.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include @@ -349,7 +350,10 @@ static int setup_frame(int sig, struct k_sigaction *ka, goto give_sigsegv; } - restorer = (void *)VDSO_SYM(&__kernel_sigreturn); + if (current->binfmt->hasvdso) + restorer = (void *)VDSO_SYM(&__kernel_sigreturn); + else + restorer = (void *)&frame->retcode; if (ka->sa.sa_flags & SA_RESTORER) restorer = ka->sa.sa_restorer; diff --git a/arch/x86_64/ia32/ia32_signal.c b/arch/x86_64/ia32/ia32_signal.c index 490f7c1b7c84..359eacc38509 100644 --- a/arch/x86_64/ia32/ia32_signal.c +++ b/arch/x86_64/ia32/ia32_signal.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include @@ -449,7 +450,11 @@ int ia32_setup_frame(int sig, struct k_sigaction *ka, /* Return stub is in 32bit vsyscall page */ { - void __user *restorer = VSYSCALL32_SIGRETURN; + void __user *restorer; + if (current->binfmt->hasvdso) + restorer = VSYSCALL32_SIGRETURN; + else + restorer = (void *)&frame->retcode; if (ka->sa.sa_flags & SA_RESTORER) restorer = ka->sa.sa_restorer; err |= __put_user(ptr_to_compat(restorer), &frame->pretcode); -- cgit v1.2.3 From 9af3cf054615862c86efcf55a37bb40f0d96e406 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 13 Feb 2007 13:26:26 +0100 Subject: [PATCH] x86_64: Wire up compat epoll_pwait > Which remembers me that I think that MIPS is using the non-compat version > of sys_epoll_pwait for compat syscalls. But maybe MIPS doesn't need a compat > syscall for some reason. Dunno. Which reminds me that x86_64 i386 compat doesn't wire up sys_epoll_pwait ;-) Signed-off-by: Ralf Baechle Signed-off-by: Andi Kleen --- arch/x86_64/ia32/ia32entry.S | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/x86_64/ia32/ia32entry.S b/arch/x86_64/ia32/ia32entry.S index 5f32cf4de5fb..eda7a0d4dc15 100644 --- a/arch/x86_64/ia32/ia32entry.S +++ b/arch/x86_64/ia32/ia32entry.S @@ -718,4 +718,5 @@ ia32_sys_call_table: .quad compat_sys_vmsplice .quad compat_sys_move_pages .quad sys_getcpu + .quad sys_epoll_pwait ia32_syscall_end: -- cgit v1.2.3 From 992af68147299bb635be97f789e4f66ba7add477 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Tue, 13 Feb 2007 13:26:26 +0100 Subject: [PATCH] i386: paravirt unhandled fallthrough The current code simply calls "start_kernel" directly if we're under a hypervisor and no paravirt_ops backend wants us, because paravirt.c registers that as a backend. This was always a vain hope; start_kernel won't get far without setup. It's also impossible for paravirt_ops backends which don't sit in the arch/i386/kernel directory: they can't link before paravirt.o anyway. Keep it simple: if we pass all the registered paravirt probes, BUG(). Signed-off-by: Rusty Russell Signed-off-by: Andi Kleen --- arch/i386/kernel/Makefile | 2 -- arch/i386/kernel/head.S | 7 ++++++- arch/i386/kernel/paravirt.c | 3 --- 3 files changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/Makefile b/arch/i386/kernel/Makefile index 97f1e961d684..223969377de4 100644 --- a/arch/i386/kernel/Makefile +++ b/arch/i386/kernel/Makefile @@ -41,8 +41,6 @@ obj-$(CONFIG_HPET_TIMER) += hpet.o obj-$(CONFIG_K8_NB) += k8.o obj-$(CONFIG_VMI) += vmi.o vmitime.o - -# Make sure this is linked after any other paravirt_ops structs: see head.S obj-$(CONFIG_PARAVIRT) += paravirt.o EXTRA_AFLAGS := -traditional diff --git a/arch/i386/kernel/head.S b/arch/i386/kernel/head.S index 734be5572eb9..b322f72ffaad 100644 --- a/arch/i386/kernel/head.S +++ b/arch/i386/kernel/head.S @@ -513,10 +513,11 @@ startup_paravirt: pushl %ecx pushl %eax - /* paravirt.o is last in link, and that probe fn never returns */ pushl $__start_paravirtprobe 1: movl 0(%esp), %eax + cmpl $__stop_paravirtprobe, %eax + je unhandled_paravirt pushl (%eax) movl 8(%esp), %eax call *(%esp) @@ -528,6 +529,10 @@ startup_paravirt: addl $4, (%esp) jmp 1b + +unhandled_paravirt: + /* Nothing wanted us: we're screwed. */ + ud2 #endif /* diff --git a/arch/i386/kernel/paravirt.c b/arch/i386/kernel/paravirt.c index ebe82552ad30..c156ecfa3872 100644 --- a/arch/i386/kernel/paravirt.c +++ b/arch/i386/kernel/paravirt.c @@ -482,9 +482,6 @@ static int __init print_banner(void) } core_initcall(print_banner); -/* We simply declare start_kernel to be the paravirt probe of last resort. */ -paravirt_probe(start_kernel); - struct paravirt_ops paravirt_ops = { .name = "bare hardware", .paravirt_enabled = 0, -- cgit v1.2.3 From 105fddb862d3da2f414329ff7719794fb2bd706b Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Tue, 13 Feb 2007 13:26:26 +0100 Subject: [PATCH] i386: Move mce_disabled to asm/mce.h Allows external actors to disable mce. Signed-off-by: Rusty Russell Signed-off-by: Andi Kleen =================================================================== --- arch/i386/kernel/cpu/mcheck/mce.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/i386/kernel/cpu/mcheck/mce.h b/arch/i386/kernel/cpu/mcheck/mce.h index 84fd4cf7d0fb..81fb6e2d35f3 100644 --- a/arch/i386/kernel/cpu/mcheck/mce.h +++ b/arch/i386/kernel/cpu/mcheck/mce.h @@ -1,4 +1,5 @@ #include +#include void amd_mcheck_init(struct cpuinfo_x86 *c); void intel_p4_mcheck_init(struct cpuinfo_x86 *c); @@ -9,6 +10,5 @@ void winchip_mcheck_init(struct cpuinfo_x86 *c); /* Call the installed machine check handler for this CPU setup. */ extern fastcall void (*machine_check_vector)(struct pt_regs *, long error_code); -extern int mce_disabled; extern int nr_mce_banks; -- cgit v1.2.3 From 2a57ff1a7051f0936b57342a57c25658d7ca3cc6 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Tue, 13 Feb 2007 13:26:26 +0100 Subject: [PATCH] i386: Rename cpu_gdt_descr and remove extern declaration from smpboot.c When I implemented the DECLARE_PER_CPU(var) macros, I was careful that people couldn't use "var" in a non-percpu context, by prepending percpu__. I never considered that this would allow them to overload the same name for a per-cpu and a non-percpu variable. It is only one of many horrors in the i386 boot code, but let's rename the non-perpcu cpu_gdt_descr to early_gdt_descr (not boot_gdt_descr, that's something else...) Signed-off-by: Rusty Russell Signed-off-by: Andi Kleen =================================================================== --- arch/i386/kernel/head.S | 6 +++--- arch/i386/kernel/smpboot.c | 1 - 2 files changed, 3 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/head.S b/arch/i386/kernel/head.S index b322f72ffaad..3fa7f9389afe 100644 --- a/arch/i386/kernel/head.S +++ b/arch/i386/kernel/head.S @@ -319,7 +319,7 @@ is386: movl $2,%ecx # set MP call check_x87 call setup_pda - lgdt cpu_gdt_descr + lgdt early_gdt_descr lidt idt_descr ljmp $(__KERNEL_CS),$1f 1: movl $(__KERNEL_DS),%eax # reload all the segment registers @@ -375,7 +375,7 @@ ENTRY(setup_pda) movl start_pda, %eax /* slot the PDA address into the GDT */ - mov cpu_gdt_descr+2, %ecx + mov early_gdt_descr+2, %ecx mov %ax, (__KERNEL_PDA+0+2)(%ecx) /* base & 0x0000ffff */ shr $16, %eax mov %al, (__KERNEL_PDA+4+0)(%ecx) /* base & 0x00ff0000 */ @@ -597,7 +597,7 @@ idt_descr: # boot GDT descriptor (later on used by CPU#0): .word 0 # 32 bit align gdt_desc.address -ENTRY(cpu_gdt_descr) +ENTRY(early_gdt_descr) .word GDT_ENTRIES*8-1 .long cpu_gdt_table diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c index 5a00b07e7194..f46a4d095e6c 100644 --- a/arch/i386/kernel/smpboot.c +++ b/arch/i386/kernel/smpboot.c @@ -623,7 +623,6 @@ extern struct { unsigned short ss; } stack_start; extern struct i386_pda *start_pda; -extern struct Xgt_desc_struct cpu_gdt_descr; #ifdef CONFIG_NUMA -- cgit v1.2.3 From 40d22c1b5675e428b3f3f9a945d0bd62e94ca2f1 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Tue, 13 Feb 2007 13:26:26 +0100 Subject: [PATCH] i386: Remove extern declaration from mm/discontig.c, put in header. Extern declarations belong in headers. Times, they are a'changin. Signed-off-by: Rusty Russell Signed-off-by: Andi Kleen =================================================================== --- arch/i386/mm/discontig.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/i386/mm/discontig.c b/arch/i386/mm/discontig.c index e0c390d6ceb5..aa58720f6871 100644 --- a/arch/i386/mm/discontig.c +++ b/arch/i386/mm/discontig.c @@ -101,7 +101,6 @@ extern void find_max_pfn(void); extern void add_one_highpage_init(struct page *, int, int); extern struct e820map e820; -extern unsigned long init_pg_tables_end; extern unsigned long highend_pfn, highstart_pfn; extern unsigned long max_low_pfn; extern unsigned long totalram_pages; -- cgit v1.2.3 From 62cc49396e593dd71c6595302bb10b085aefbfa5 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Tue, 13 Feb 2007 13:26:26 +0100 Subject: [PATCH] x86: Unify pcspeaker platform device code between i386/x86-64 Trivial cleanup. Only change is that it is always compiled in now on x86-64 like on i386. Signed-off-by: Andi Kleen --- arch/i386/kernel/Makefile | 1 + arch/i386/kernel/pcspeaker.c | 20 ++++++++++++++++++++ arch/i386/kernel/setup.c | 26 -------------------------- arch/x86_64/kernel/Makefile | 2 ++ arch/x86_64/kernel/setup.c | 20 -------------------- 5 files changed, 23 insertions(+), 46 deletions(-) create mode 100644 arch/i386/kernel/pcspeaker.c (limited to 'arch') diff --git a/arch/i386/kernel/Makefile b/arch/i386/kernel/Makefile index 223969377de4..cbe4e601885c 100644 --- a/arch/i386/kernel/Makefile +++ b/arch/i386/kernel/Makefile @@ -42,6 +42,7 @@ obj-$(CONFIG_K8_NB) += k8.o obj-$(CONFIG_VMI) += vmi.o vmitime.o obj-$(CONFIG_PARAVIRT) += paravirt.o +obj-y += pcspeaker.o EXTRA_AFLAGS := -traditional diff --git a/arch/i386/kernel/pcspeaker.c b/arch/i386/kernel/pcspeaker.c new file mode 100644 index 000000000000..bc1f2d3ea277 --- /dev/null +++ b/arch/i386/kernel/pcspeaker.c @@ -0,0 +1,20 @@ +#include +#include +#include + +static __init int add_pcspkr(void) +{ + struct platform_device *pd; + int ret; + + pd = platform_device_alloc("pcspkr", -1); + if (!pd) + return -ENOMEM; + + ret = platform_device_add(pd); + if (ret) + platform_device_put(pd); + + return ret; +} +device_initcall(add_pcspkr); diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c index bd8c218d94af..122623dcc6e1 100644 --- a/arch/i386/kernel/setup.c +++ b/arch/i386/kernel/setup.c @@ -33,7 +33,6 @@ #include #include #include -#include #include #include #include @@ -660,28 +659,3 @@ void __init setup_arch(char **cmdline_p) #endif tsc_init(); } - -static __init int add_pcspkr(void) -{ - struct platform_device *pd; - int ret; - - pd = platform_device_alloc("pcspkr", -1); - if (!pd) - return -ENOMEM; - - ret = platform_device_add(pd); - if (ret) - platform_device_put(pd); - - return ret; -} -device_initcall(add_pcspkr); - -/* - * Local Variables: - * mode:c - * c-file-style:"k&r" - * c-basic-offset:8 - * End: - */ diff --git a/arch/x86_64/kernel/Makefile b/arch/x86_64/kernel/Makefile index 3c7cbff04d3d..ae399458024b 100644 --- a/arch/x86_64/kernel/Makefile +++ b/arch/x86_64/kernel/Makefile @@ -43,6 +43,7 @@ obj-$(CONFIG_PCI) += early-quirks.o obj-y += topology.o obj-y += intel_cacheinfo.o +obj-y += pcspeaker.o CFLAGS_vsyscall.o := $(PROFILING) -g0 @@ -56,3 +57,4 @@ quirks-y += ../../i386/kernel/quirks.o i8237-y += ../../i386/kernel/i8237.o msr-$(subst m,y,$(CONFIG_X86_MSR)) += ../../i386/kernel/msr.o alternative-y += ../../i386/kernel/alternative.o +pcspeaker-y += ../../i386/kernel/pcspeaker.o diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c index 13daaf359d21..3d98b696881d 100644 --- a/arch/x86_64/kernel/setup.c +++ b/arch/x86_64/kernel/setup.c @@ -1104,23 +1104,3 @@ struct seq_operations cpuinfo_op = { .stop = c_stop, .show = show_cpuinfo, }; - -#if defined(CONFIG_INPUT_PCSPKR) || defined(CONFIG_INPUT_PCSPKR_MODULE) -#include -static __init int add_pcspkr(void) -{ - struct platform_device *pd; - int ret; - - pd = platform_device_alloc("pcspkr", -1); - if (!pd) - return -ENOMEM; - - ret = platform_device_add(pd); - if (ret) - platform_device_put(pd); - - return ret; -} -device_initcall(add_pcspkr); -#endif -- cgit v1.2.3 From 98838ec984b78c625bbf9a5daaf001cd216b8f86 Mon Sep 17 00:00:00 2001 From: Giuliano Procida Date: Tue, 13 Feb 2007 13:26:26 +0100 Subject: [PATCH] i386: fix 32-bit ioctls on x64_32 [MTRR] fix 32-bit ioctls on x64_32 Signed-off-by: Giuliano Procida Signed-off-by: Andi Kleen --- arch/i386/kernel/cpu/mtrr/if.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) (limited to 'arch') diff --git a/arch/i386/kernel/cpu/mtrr/if.c b/arch/i386/kernel/cpu/mtrr/if.c index ee771f305f96..c7d8f1756745 100644 --- a/arch/i386/kernel/cpu/mtrr/if.c +++ b/arch/i386/kernel/cpu/mtrr/if.c @@ -211,6 +211,9 @@ mtrr_ioctl(struct file *file, unsigned int cmd, unsigned long __arg) default: return -ENOTTY; case MTRRIOC_ADD_ENTRY: +#ifdef CONFIG_COMPAT + case MTRRIOC32_ADD_ENTRY: +#endif if (!capable(CAP_SYS_ADMIN)) return -EPERM; err = @@ -218,21 +221,33 @@ mtrr_ioctl(struct file *file, unsigned int cmd, unsigned long __arg) file, 0); break; case MTRRIOC_SET_ENTRY: +#ifdef CONFIG_COMPAT + case MTRRIOC32_SET_ENTRY: +#endif if (!capable(CAP_SYS_ADMIN)) return -EPERM; err = mtrr_add(sentry.base, sentry.size, sentry.type, 0); break; case MTRRIOC_DEL_ENTRY: +#ifdef CONFIG_COMPAT + case MTRRIOC32_DEL_ENTRY: +#endif if (!capable(CAP_SYS_ADMIN)) return -EPERM; err = mtrr_file_del(sentry.base, sentry.size, file, 0); break; case MTRRIOC_KILL_ENTRY: +#ifdef CONFIG_COMPAT + case MTRRIOC32_KILL_ENTRY: +#endif if (!capable(CAP_SYS_ADMIN)) return -EPERM; err = mtrr_del(-1, sentry.base, sentry.size); break; case MTRRIOC_GET_ENTRY: +#ifdef CONFIG_COMPAT + case MTRRIOC32_GET_ENTRY: +#endif if (gentry.regnum >= num_var_ranges) return -EINVAL; mtrr_if->get(gentry.regnum, &gentry.base, &size, &type); @@ -249,6 +264,9 @@ mtrr_ioctl(struct file *file, unsigned int cmd, unsigned long __arg) break; case MTRRIOC_ADD_PAGE_ENTRY: +#ifdef CONFIG_COMPAT + case MTRRIOC32_ADD_PAGE_ENTRY: +#endif if (!capable(CAP_SYS_ADMIN)) return -EPERM; err = @@ -256,21 +274,33 @@ mtrr_ioctl(struct file *file, unsigned int cmd, unsigned long __arg) file, 1); break; case MTRRIOC_SET_PAGE_ENTRY: +#ifdef CONFIG_COMPAT + case MTRRIOC32_SET_PAGE_ENTRY: +#endif if (!capable(CAP_SYS_ADMIN)) return -EPERM; err = mtrr_add_page(sentry.base, sentry.size, sentry.type, 0); break; case MTRRIOC_DEL_PAGE_ENTRY: +#ifdef CONFIG_COMPAT + case MTRRIOC32_DEL_PAGE_ENTRY: +#endif if (!capable(CAP_SYS_ADMIN)) return -EPERM; err = mtrr_file_del(sentry.base, sentry.size, file, 1); break; case MTRRIOC_KILL_PAGE_ENTRY: +#ifdef CONFIG_COMPAT + case MTRRIOC32_KILL_PAGE_ENTRY: +#endif if (!capable(CAP_SYS_ADMIN)) return -EPERM; err = mtrr_del_page(-1, sentry.base, sentry.size); break; case MTRRIOC_GET_PAGE_ENTRY: +#ifdef CONFIG_COMPAT + case MTRRIOC32_GET_PAGE_ENTRY: +#endif if (gentry.regnum >= num_var_ranges) return -EINVAL; mtrr_if->get(gentry.regnum, &gentry.base, &size, &type); -- cgit v1.2.3 From 22c5ace7290b792faf64ffe90cf933950fbf52db Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Tue, 13 Feb 2007 13:26:26 +0100 Subject: [PATCH] i386: Fix broken CONFIG_COMPAT_VDSO on i386 After updating several machines to 2.6.20, I can't boot anymore the single one of them that supports the NX bit and is configured as a 32-bit system. My understanding is that the VDSO changes in 2.6.20-rc7 were not fully cooked, in that with that config option enabled VDSO_SYM(x) now equals x, meaning that an address in the fixmap area is now being passed to apps via AT_SYSINFO. However, the page is mapped with PAGE_READONLY rather than PAGE_READONLY_EXEC. I'm not certain whether having app code go through the fixmap area is intended, but in case it is here is the simple patch that makes things work again. Signed-off-by: Jan Beulich Signed-off-by: Andi Kleen --- arch/i386/kernel/sysenter.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/i386/kernel/sysenter.c b/arch/i386/kernel/sysenter.c index bc882a2b1db6..13ca54a85a1c 100644 --- a/arch/i386/kernel/sysenter.c +++ b/arch/i386/kernel/sysenter.c @@ -78,7 +78,7 @@ int __init sysenter_setup(void) syscall_pages[0] = virt_to_page(syscall_page); #ifdef CONFIG_COMPAT_VDSO - __set_fixmap(FIX_VDSO, __pa(syscall_page), PAGE_READONLY); + __set_fixmap(FIX_VDSO, __pa(syscall_page), PAGE_READONLY_EXEC); printk("Compat vDSO mapped to %08lx.\n", __fix_to_virt(FIX_VDSO)); #endif -- cgit v1.2.3 From 126b1922367fbe5513daa675a2abd13ed3917f4e Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Tue, 13 Feb 2007 13:26:26 +0100 Subject: [PATCH] x86-64: Remove mk_pte_phys() - Convert last user to pfn_pte - Remove mk_pte_phys Suggested by Jan Beulich Signed-off-by: Andi Kleen --- arch/x86_64/mm/pageattr.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86_64/mm/pageattr.c b/arch/x86_64/mm/pageattr.c index ccb91dd996a9..65c5eaa59905 100644 --- a/arch/x86_64/mm/pageattr.c +++ b/arch/x86_64/mm/pageattr.c @@ -107,6 +107,7 @@ static void revert_page(unsigned long address, pgprot_t ref_prot) pud_t *pud; pmd_t *pmd; pte_t large_pte; + unsigned long pfn; pgd = pgd_offset_k(address); BUG_ON(pgd_none(*pgd)); @@ -114,7 +115,8 @@ static void revert_page(unsigned long address, pgprot_t ref_prot) BUG_ON(pud_none(*pud)); pmd = pmd_offset(pud, address); BUG_ON(pmd_val(*pmd) & _PAGE_PSE); - large_pte = mk_pte_phys(__pa(address) & LARGE_PAGE_MASK, ref_prot); + pfn = (__pa(address) & LARGE_PAGE_MASK) >> PAGE_SHIFT; + large_pte = pfn_pte(pfn, ref_prot); large_pte = pte_mkhuge(large_pte); set_pte((pte_t *)pmd, large_pte); } -- cgit v1.2.3 From c2882bb12cbd8a4170e673e6a33c6be047b75bc1 Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Fri, 9 Feb 2007 17:28:31 -0600 Subject: [POWERPC] 85xx: Add support for the 8568 MDS board Add support for the MPC8568 MDS reference board Signed-off-by: Andrew Fleming Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8568mds.dts | 380 ++++++++++++++++++++++++++++++ arch/powerpc/platforms/85xx/Kconfig | 13 + arch/powerpc/platforms/85xx/Makefile | 1 + arch/powerpc/platforms/85xx/mpc8568_mds.c | 246 +++++++++++++++++++ 4 files changed, 640 insertions(+) create mode 100644 arch/powerpc/boot/dts/mpc8568mds.dts create mode 100644 arch/powerpc/platforms/85xx/mpc8568_mds.c (limited to 'arch') diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts new file mode 100644 index 000000000000..06d24653e422 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8568mds.dts @@ -0,0 +1,380 @@ +/* + * MPC8568E MDS Device Tree Source + * + * Copyright 2007 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + + +/* +/memreserve/ 00000000 1000000; +*/ + +/ { + model = "MPC8568EMDS"; + compatible = "MPC85xxMDS"; + #address-cells = <1>; + #size-cells = <1>; + linux,phandle = <100>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + linux,phandle = <200>; + + PowerPC,8568@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <8000>; // L1, 32K + i-cache-size = <8000>; // L1, 32K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + 32-bit; + linux,phandle = <201>; + }; + }; + + memory { + device_type = "memory"; + linux,phandle = <300>; + reg = <00000000 10000000>; + }; + + bcsr@f8000000 { + device_type = "board-control"; + reg = ; + }; + + soc8568@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 e0000000 00100000>; + reg = ; + bus-frequency = <0>; + + i2c@3000 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3000 100>; + interrupts = <1b 2>; + interrupt-parent = <40000>; + dfsrr; + }; + + i2c@3100 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3100 100>; + interrupts = <1b 2>; + interrupt-parent = <40000>; + dfsrr; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "mdio"; + compatible = "gianfar"; + reg = <24520 20>; + linux,phandle = <24520>; + ethernet-phy@0 { + linux,phandle = <2452000>; + interrupt-parent = <40000>; + interrupts = <31 1>; + reg = <0>; + device_type = "ethernet-phy"; + }; + ethernet-phy@1 { + linux,phandle = <2452001>; + interrupt-parent = <40000>; + interrupts = <32 1>; + reg = <1>; + device_type = "ethernet-phy"; + }; + + ethernet-phy@2 { + linux,phandle = <2452002>; + interrupt-parent = <40000>; + interrupts = <31 1>; + reg = <2>; + device_type = "ethernet-phy"; + }; + ethernet-phy@3 { + linux,phandle = <2452003>; + interrupt-parent = <40000>; + interrupts = <32 1>; + reg = <3>; + device_type = "ethernet-phy"; + }; + }; + + ethernet@24000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <24000 1000>; + mac-address = [ 00 00 00 00 00 00 ]; + interrupts = ; + interrupt-parent = <40000>; + phy-handle = <2452002>; + }; + + ethernet@25000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <25000 1000>; + mac-address = [ 00 00 00 00 00 00]; + interrupts = <13 2 14 2 18 2>; + interrupt-parent = <40000>; + phy-handle = <2452003>; + }; + + serial@4500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4500 100>; + clock-frequency = <0>; + interrupts = <1a 2>; + interrupt-parent = <40000>; + }; + + serial@4600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4600 100>; + clock-frequency = <0>; + interrupts = <1a 2>; + interrupt-parent = <40000>; + }; + + crypto@30000 { + device_type = "crypto"; + model = "SEC2"; + compatible = "talitos"; + reg = <30000 f000>; + interrupts = <1d 2>; + interrupt-parent = <40000>; + num-channels = <4>; + channel-fifo-len = <18>; + exec-units-mask = <000000fe>; + descriptor-types-mask = <012b0ebf>; + }; + + pic@40000 { + linux,phandle = <40000>; + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <40000 40000>; + built-in; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + big-endian; + }; + par_io@e0100 { + reg = ; + device_type = "par_io"; + num-ports = <7>; + + ucc_pin@01 { + linux,phandle = ; + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 4 0a 1 0 2 0 /* TxD0 */ + 4 09 1 0 2 0 /* TxD1 */ + 4 08 1 0 2 0 /* TxD2 */ + 4 07 1 0 2 0 /* TxD3 */ + 4 17 1 0 2 0 /* TxD4 */ + 4 16 1 0 2 0 /* TxD5 */ + 4 15 1 0 2 0 /* TxD6 */ + 4 14 1 0 2 0 /* TxD7 */ + 4 0f 2 0 2 0 /* RxD0 */ + 4 0e 2 0 2 0 /* RxD1 */ + 4 0d 2 0 2 0 /* RxD2 */ + 4 0c 2 0 2 0 /* RxD3 */ + 4 1d 2 0 2 0 /* RxD4 */ + 4 1c 2 0 2 0 /* RxD5 */ + 4 1b 2 0 2 0 /* RxD6 */ + 4 1a 2 0 2 0 /* RxD7 */ + 4 0b 1 0 2 0 /* TX_EN */ + 4 18 1 0 2 0 /* TX_ER */ + 4 0f 2 0 2 0 /* RX_DV */ + 4 1e 2 0 2 0 /* RX_ER */ + 4 11 2 0 2 0 /* RX_CLK */ + 4 13 1 0 2 0 /* GTX_CLK */ + 1 1f 2 0 3 0>; /* GTX125 */ + }; + ucc_pin@02 { + linux,phandle = ; + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 5 0a 1 0 2 0 /* TxD0 */ + 5 09 1 0 2 0 /* TxD1 */ + 5 08 1 0 2 0 /* TxD2 */ + 5 07 1 0 2 0 /* TxD3 */ + 5 17 1 0 2 0 /* TxD4 */ + 5 16 1 0 2 0 /* TxD5 */ + 5 15 1 0 2 0 /* TxD6 */ + 5 14 1 0 2 0 /* TxD7 */ + 5 0f 2 0 2 0 /* RxD0 */ + 5 0e 2 0 2 0 /* RxD1 */ + 5 0d 2 0 2 0 /* RxD2 */ + 5 0c 2 0 2 0 /* RxD3 */ + 5 1d 2 0 2 0 /* RxD4 */ + 5 1c 2 0 2 0 /* RxD5 */ + 5 1b 2 0 2 0 /* RxD6 */ + 5 1a 2 0 2 0 /* RxD7 */ + 5 0b 1 0 2 0 /* TX_EN */ + 5 18 1 0 2 0 /* TX_ER */ + 5 10 2 0 2 0 /* RX_DV */ + 5 1e 2 0 2 0 /* RX_ER */ + 5 11 2 0 2 0 /* RX_CLK */ + 5 13 1 0 2 0 /* GTX_CLK */ + 1 1f 2 0 3 0 /* GTX125 */ + 4 06 3 0 2 0 /* MDIO */ + 4 05 1 0 2 0>; /* MDC */ + }; + }; + }; + + qe@e0080000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "qe"; + model = "QE"; + ranges = <0 e0080000 00040000>; + reg = ; + brg-frequency = <0>; + bus-frequency = <179A7B00>; + + muram@10000 { + device_type = "muram"; + ranges = <0 00010000 0000c000>; + + data-only@0{ + reg = <0 c000>; + }; + }; + + spi@4c0 { + device_type = "spi"; + compatible = "fsl_spi"; + reg = <4c0 40>; + interrupts = <2>; + interrupt-parent = <80>; + mode = "cpu"; + }; + + spi@500 { + device_type = "spi"; + compatible = "fsl_spi"; + reg = <500 40>; + interrupts = <1>; + interrupt-parent = <80>; + mode = "cpu"; + }; + + ucc@2000 { + device_type = "network"; + compatible = "ucc_geth"; + model = "UCC"; + device-id = <1>; + reg = <2000 200>; + interrupts = <20>; + interrupt-parent = <80>; + mac-address = [ 00 04 9f 00 23 23 ]; + rx-clock = <0>; + tx-clock = <19>; + phy-handle = <212000>; + pio-handle = ; + }; + + ucc@3000 { + device_type = "network"; + compatible = "ucc_geth"; + model = "UCC"; + device-id = <2>; + reg = <3000 200>; + interrupts = <21>; + interrupt-parent = <80>; + mac-address = [ 00 11 22 33 44 55 ]; + rx-clock = <0>; + tx-clock = <14>; + phy-handle = <212001>; + pio-handle = ; + }; + + mdio@2120 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2120 18>; + device_type = "mdio"; + compatible = "ucc_geth_phy"; + + /* These are the same PHYs as on + * gianfar's MDIO bus */ + ethernet-phy@00 { + linux,phandle = <212000>; + interrupt-parent = <40000>; + interrupts = <31 1>; + reg = <0>; + device_type = "ethernet-phy"; + interface = <6>; //ENET_1000_GMII + }; + ethernet-phy@01 { + linux,phandle = <212001>; + interrupt-parent = <40000>; + interrupts = <32 1>; + reg = <1>; + device_type = "ethernet-phy"; + interface = <6>; + }; + ethernet-phy@02 { + linux,phandle = <212002>; + interrupt-parent = <40000>; + interrupts = <31 1>; + reg = <2>; + device_type = "ethernet-phy"; + interface = <6>; //ENET_1000_GMII + }; + ethernet-phy@03 { + linux,phandle = <212003>; + interrupt-parent = <40000>; + interrupts = <32 1>; + reg = <3>; + device_type = "ethernet-phy"; + interface = <6>; //ENET_1000_GMII + }; + }; + + qeic@80 { + linux,phandle = <80>; + interrupt-controller; + device_type = "qeic"; + #address-cells = <0>; + #interrupt-cells = <1>; + reg = <80 80>; + built-in; + big-endian; + interrupts = <1e 2 1e 2>; //high:30 low:30 + interrupt-parent = <40000>; + }; + + }; +}; diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index 0584f3c7e884..0efdd2f1babe 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -23,6 +23,13 @@ config MPC85xx_CDS help This option enables support for the MPC85xx CDS board +config MPC8568_MDS + bool "Freescale MPC8568 MDS" + select DEFAULT_UIMAGE +# select QUICC_ENGINE + help + This option enables support for the MPC8568 MDS board + endchoice config MPC8540 @@ -36,6 +43,12 @@ config MPC8560 select PPC_INDIRECT_PCI default y if MPC8560_ADS +config MPC85xx + bool + select PPC_UDBG_16550 + select PPC_INDIRECT_PCI + default y if MPC8540_ADS || MPC85xx_CDS || MPC8560_ADS || MPC8568_MDS + config PPC_INDIRECT_PCI_BE bool depends on PPC_85xx diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile index 282f5d0d0152..e40e521816b8 100644 --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -5,3 +5,4 @@ obj-$(CONFIG_PPC_85xx) += misc.o pci.o obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o +obj-$(CONFIG_MPC8568_MDS) += mpc8568_mds.o diff --git a/arch/powerpc/platforms/85xx/mpc8568_mds.c b/arch/powerpc/platforms/85xx/mpc8568_mds.c new file mode 100644 index 000000000000..0861d1107bc8 --- /dev/null +++ b/arch/powerpc/platforms/85xx/mpc8568_mds.c @@ -0,0 +1,246 @@ +/* + * Copyright (C) Freescale Semicondutor, Inc. 2006-2007. All rights reserved. + * + * Author: Andy Fleming + * + * Based on 83xx/mpc8360e_pb.c by: + * Li Yang + * Yin Olivia + * + * Description: + * MPC8568E MDS PB board specific routines. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "mpc85xx.h" + +#undef DEBUG +#ifdef DEBUG +#define DBG(fmt...) udbg_printf(fmt) +#else +#define DBG(fmt...) +#endif + +#ifndef CONFIG_PCI +unsigned long isa_io_base = 0; +unsigned long isa_mem_base = 0; +#endif + +/* ************************************************************************ + * + * Setup the architecture + * + */ +static void __init mpc8568_mds_setup_arch(void) +{ + struct device_node *np; + static u8 *bcsr_regs = NULL; + + + if (ppc_md.progress) + ppc_md.progress("mpc8568_mds_setup_arch()", 0); + + np = of_find_node_by_type(NULL, "cpu"); + if (np != NULL) { + const unsigned int *fp = + get_property(np, "clock-frequency", NULL); + if (fp != NULL) + loops_per_jiffy = *fp / HZ; + else + loops_per_jiffy = 50000000 / HZ; + of_node_put(np); + } + + /* Map BCSR area */ + np = of_find_node_by_name(NULL, "bcsr"); + if (np != NULL) { + struct resource res; + + of_address_to_resource(np, 0, &res); + bcsr_regs = ioremap(res.start, res.end - res.start +1); + of_node_put(np); + } + +#ifdef CONFIG_PCI + for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) { + add_bridge(np); + } + of_node_put(np); +#endif + +#ifdef CONFIG_QUICC_ENGINE + if ((np = of_find_node_by_name(NULL, "qe")) != NULL) { + qe_reset(); + of_node_put(np); + } + + if ((np = of_find_node_by_name(NULL, "par_io")) != NULL) { + struct device_node *ucc = NULL; + + par_io_init(np); + of_node_put(np); + + for ( ;(ucc = of_find_node_by_name(ucc, "ucc")) != NULL;) + par_io_of_config(ucc); + + of_node_put(ucc); + } + + if (bcsr_regs) { + u8 bcsr_phy; + + /* Reset the Ethernet PHY */ + bcsr_phy = in_be8(&bcsr_regs[9]); + bcsr_phy &= ~0x20; + out_be8(&bcsr_regs[9], bcsr_phy); + + udelay(1000); + + bcsr_phy = in_be8(&bcsr_regs[9]); + bcsr_phy |= 0x20; + out_be8(&bcsr_regs[9], bcsr_phy); + + iounmap(bcsr_regs); + } + +#endif /* CONFIG_QUICC_ENGINE */ +} + +static struct of_device_id mpc8568_ids[] = { + { .type = "soc", }, + { .compatible = "soc", }, + { .type = "qe", }, + {}, +}; + +static int __init mpc8568_publish_devices(void) +{ + if (!machine_is(mpc8568_mds)) + return 0; + + /* Publish the QE devices */ + of_platform_bus_probe(NULL,mpc8568_ids,NULL); + + return 0; +} +device_initcall(mpc8568_publish_devices); + +static void __init mpc8568_mds_pic_init(void) +{ + struct mpic *mpic; + struct resource r; + struct device_node *np = NULL; + + np = of_find_node_by_type(NULL, "open-pic"); + if (!np) + return; + + if (of_address_to_resource(np, 0, &r)) { + printk(KERN_ERR "Failed to map mpic register space\n"); + of_node_put(np); + return; + } + + mpic = mpic_alloc(np, r.start, + MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, + 4, 0, " OpenPIC "); + BUG_ON(mpic == NULL); + of_node_put(np); + + /* Internal Interrupts */ + mpic_assign_isu(mpic, 0, r.start + 0x10200); + mpic_assign_isu(mpic, 1, r.start + 0x10280); + mpic_assign_isu(mpic, 2, r.start + 0x10300); + mpic_assign_isu(mpic, 3, r.start + 0x10380); + mpic_assign_isu(mpic, 4, r.start + 0x10400); + mpic_assign_isu(mpic, 5, r.start + 0x10480); + mpic_assign_isu(mpic, 6, r.start + 0x10500); + mpic_assign_isu(mpic, 7, r.start + 0x10580); + mpic_assign_isu(mpic, 8, r.start + 0x10600); + mpic_assign_isu(mpic, 9, r.start + 0x10680); + mpic_assign_isu(mpic, 10, r.start + 0x10700); + mpic_assign_isu(mpic, 11, r.start + 0x10780); + + /* External Interrupts */ + mpic_assign_isu(mpic, 12, r.start + 0x10000); + mpic_assign_isu(mpic, 13, r.start + 0x10080); + mpic_assign_isu(mpic, 14, r.start + 0x10100); + + mpic_init(mpic); + + +#ifdef CONFIG_QUICC_ENGINE + np = of_find_node_by_type(NULL, "qeic"); + if (!np) + return; + + qe_ic_init(np, 0); + of_node_put(np); +#endif /* CONFIG_QUICC_ENGINE */ +} + + +static int __init mpc8568_mds_probe(void) +{ + char *model = of_get_flat_dt_prop(of_get_flat_dt_root(), + "model", NULL); + if (model == NULL) + return 0; + if (strcmp(model, "MPC8568EMDS")) + return 0; + + DBG("MPC8568EMDS found\n"); + + return 1; +} + + +define_machine(mpc8568_mds) { + .name = "MPC8568E MDS", + .probe = mpc8568_mds_probe, + .setup_arch = mpc8568_mds_setup_arch, + .init_IRQ = mpc8568_mds_pic_init, + .get_irq = mpic_get_irq, + .restart = mpc85xx_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; -- cgit v1.2.3 From eb11a720a85833bbd9b92628f196583ee1d50d4e Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Fri, 9 Feb 2007 17:30:09 -0600 Subject: [POWERPC] 85xx: Add a defconfig for the 8568 MDS Add defconfig for the MPC8568 MDS reference board Signed-off-by: Andrew Fleming Signed-off-by: Kumar Gala --- arch/powerpc/configs/mpc8568mds_defconfig | 992 ++++++++++++++++++++++++++++++ 1 file changed, 992 insertions(+) create mode 100644 arch/powerpc/configs/mpc8568mds_defconfig (limited to 'arch') diff --git a/arch/powerpc/configs/mpc8568mds_defconfig b/arch/powerpc/configs/mpc8568mds_defconfig new file mode 100644 index 000000000000..058e06d88bc1 --- /dev/null +++ b/arch/powerpc/configs/mpc8568mds_defconfig @@ -0,0 +1,992 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.20-rc5 +# Wed Feb 7 23:54:25 2007 +# +# CONFIG_PPC64 is not set +CONFIG_PPC32=y +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +CONFIG_DEFAULT_UIMAGE=y + +# +# Processor support +# +# CONFIG_CLASSIC32 is not set +# CONFIG_PPC_82xx is not set +# CONFIG_PPC_83xx is not set +CONFIG_PPC_85xx=y +# CONFIG_PPC_86xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_8xx is not set +# CONFIG_E200 is not set +CONFIG_85xx=y +CONFIG_E500=y +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_BOOKE=y +CONFIG_FSL_BOOKE=y +# CONFIG_PHYS_64BIT is not set +CONFIG_SPE=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +# CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +# CONFIG_EPOLL is not set +CONFIG_SHMEM=y +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_WANT_EARLY_SERIAL is not set + +# +# Platform support +# +# CONFIG_MPC8540_ADS is not set +# CONFIG_MPC8560_ADS is not set +# CONFIG_MPC85xx_CDS is not set +CONFIG_MPC8568_MDS=y +CONFIG_MPC85xx=y +CONFIG_PPC_INDIRECT_PCI_BE=y +CONFIG_MPIC=y + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_MATH_EMULATION=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_FSL_SOC=y +# CONFIG_PCI is not set +# CONFIG_PCI_DOMAINS is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_BOOT_LOAD=0x00800000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=32768 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +# CONFIG_TIFM_CORE is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +# CONFIG_BLK_DEV_SD is not set +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Macintosh device drivers +# +# CONFIG_MAC_EMUMOUSEBTN is not set +# CONFIG_WINDFARM is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# PHY device support +# +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +CONFIG_MARVELL_PHY=y +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y + +# +# Ethernet (1000 Mbit) +# +CONFIG_GIANFAR=y +CONFIG_GFAR_NAPI=y + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_BOOKE_WDT is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +CONFIG_I2C_MPC=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_M41T00 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB is not set +# CONFIG_FB_IBM_GXT4500 is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# HID Devices +# +CONFIG_HID=y + +# +# USB support +# +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# Virtualization +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +# CONFIG_MSDOS_PARTITION is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_IOMAP_COPY=y + +# +# Instrumentation Support +# +CONFIG_PROFILING=y +CONFIG_OPROFILE=y + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RWSEMS is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +CONFIG_DEBUGGER=y +# CONFIG_XMON is not set +# CONFIG_BDI_SWITCH is not set +CONFIG_BOOTX_TEXT=y +CONFIG_PPC_EARLY_DEBUG=y +# CONFIG_PPC_EARLY_DEBUG_LPAR is not set +# CONFIG_PPC_EARLY_DEBUG_G5 is not set +# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set +# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set +# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set +# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# -- cgit v1.2.3 From 8c4a013da84e69e4d736363921792e1b37525577 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Fri, 9 Feb 2007 14:00:36 -0600 Subject: [POWERPC] 83xx: Add support for MPC8349E-mITX-GP This patch adds a defconfig and a DTS for the MPC8349E-mITX-GP, a variant of the MPC8349E-mITX. USB is disabled because the only USB port is not setup properly by firmware/kernel Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8349emitxgp.dts | 187 ++++ arch/powerpc/configs/mpc834x_itxgp_defconfig | 1174 ++++++++++++++++++++++++++ 2 files changed, 1361 insertions(+) create mode 100644 arch/powerpc/boot/dts/mpc8349emitxgp.dts create mode 100644 arch/powerpc/configs/mpc834x_itxgp_defconfig (limited to 'arch') diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts new file mode 100644 index 000000000000..3190774de1d8 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts @@ -0,0 +1,187 @@ +/* + * MPC8349E-mITX-GP Device Tree Source + * + * Copyright 2007 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +/ { + model = "MPC8349EMITXGP"; + compatible = "MPC834xMITXGP"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8349@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; + i-cache-line-size = <20>; + d-cache-size = <8000>; + i-cache-size = <8000>; + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + 32-bit; + }; + }; + + memory { + device_type = "memory"; + reg = <00000000 10000000>; + }; + + soc8349@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 e0000000 00100000>; + reg = ; + bus-frequency = <0>; // from bootloader + + wdt@200 { + device_type = "watchdog"; + compatible = "mpc83xx_wdt"; + reg = <200 100>; + }; + + i2c@3000 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3000 100>; + interrupts = ; + interrupt-parent = <700>; + dfsrr; + }; + + i2c@3100 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3100 100>; + interrupts = ; + interrupt-parent = <700>; + dfsrr; + }; + + spi@7000 { + device_type = "spi"; + compatible = "mpc83xx_spi"; + reg = <7000 1000>; + interrupts = <10 8>; + interrupt-parent = <700>; + mode = <0>; + }; + + usb@23000 { + device_type = "usb"; + compatible = "fsl-usb2-dr"; + reg = <23000 1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <700>; + interrupts = <26 2>; + dr_mode = "otg"; + phy_type = "ulpi"; + }; + + mdio@24520 { + device_type = "mdio"; + compatible = "gianfar"; + reg = <24520 20>; + #address-cells = <1>; + #size-cells = <0>; + linux,phandle = <24520>; + + /* Vitesse 8201 */ + ethernet-phy@1c { + linux,phandle = <245201c>; + interrupt-parent = <700>; + interrupts = <12 2>; + reg = <1c>; + device_type = "ethernet-phy"; + }; + }; + + ethernet@24000 { + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <24000 1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <20 8 21 8 22 8>; + interrupt-parent = <700>; + phy-handle = <245201c>; + }; + + serial@4500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4500 100>; + clock-frequency = <0>; // from bootloader + interrupts = <9 8>; + interrupt-parent = <700>; + }; + + serial@4600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4600 100>; + clock-frequency = <0>; // from bootloader + interrupts = ; + interrupt-parent = <700>; + }; + + pci@8600 { + interrupt-map-mask = ; + interrupt-map = < + /* IDSEL 0x0F - PCI Slot */ + 7800 0 0 1 700 14 8 /* PCI_INTA */ + 7800 0 0 2 700 15 8 /* PCI_INTB */ + >; + interrupt-parent = <700>; + interrupts = <43 8>; + bus-range = <1 1>; + ranges = <42000000 0 a0000000 a0000000 0 10000000 + 02000000 0 b0000000 b0000000 0 10000000 + 01000000 0 00000000 e3000000 0 01000000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <8600 100>; + compatible = "83xx"; + device_type = "pci"; + }; + + crypto@30000 { + device_type = "crypto"; + model = "SEC2"; + compatible = "talitos"; + reg = <30000 10000>; + interrupts = ; + interrupt-parent = <700>; + num-channels = <4>; + channel-fifo-len = <18>; + exec-units-mask = <0000007e>; + descriptor-types-mask = <01010ebf>; + }; + + pic@700 { + linux,phandle = <700>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <700 100>; + built-in; + device_type = "ipic"; + }; + }; +}; diff --git a/arch/powerpc/configs/mpc834x_itxgp_defconfig b/arch/powerpc/configs/mpc834x_itxgp_defconfig new file mode 100644 index 000000000000..4aa666c9cb94 --- /dev/null +++ b/arch/powerpc/configs/mpc834x_itxgp_defconfig @@ -0,0 +1,1174 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.20 +# Fri Feb 9 13:28:19 2007 +# +# CONFIG_PPC64 is not set +CONFIG_PPC32=y +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +CONFIG_DEFAULT_UIMAGE=y + +# +# Processor support +# +# CONFIG_CLASSIC32 is not set +# CONFIG_PPC_82xx is not set +CONFIG_PPC_83xx=y +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_86xx is not set +# CONFIG_PPC_8xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_6xx=y +CONFIG_83xx=y +CONFIG_PPC_FPU=y +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_PPC_STD_MMU=y +CONFIG_PPC_STD_MMU_32=y +# CONFIG_SMP is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +# CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +# CONFIG_EPOLL is not set +CONFIG_SHMEM=y +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_PPC_GEN550=y +# CONFIG_WANT_EARLY_SERIAL is not set + +# +# Platform support +# +# CONFIG_MPC832x_MDS is not set +# CONFIG_MPC834x_SYS is not set +CONFIG_MPC834x_ITX=y +# CONFIG_MPC8360E_PB is not set +CONFIG_MPC834x=y +# CONFIG_MPIC is not set + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_GENERIC_ISA_DMA=y +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_FSL_SOC=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PCIEPORTBUS is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_BOOT_LOAD=0x00800000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +# CONFIG_MTD_PARTITIONS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +# CONFIG_MTD_BLKDEVS is not set +# CONFIG_MTD_BLOCK is not set +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0xfe000000 +CONFIG_MTD_PHYSMAP_LEN=0x800000 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_PHYSMAP_OF is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_NAND_CAFE is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=32768 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set + +# +# SCSI Transports +# +CONFIG_SCSI_SPI_ATTRS=y +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# +# CONFIG_MAC_EMUMOUSEBTN is not set +# CONFIG_WINDFARM is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +CONFIG_CICADA_PHY=y +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set + +# +# Ethernet (10 or 100Mbit) +# +# CONFIG_NET_ETHERNET is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +CONFIG_GIANFAR=y +CONFIG_GFAR_NAPI=y +# CONFIG_QLA3XXX is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_SERIAL_8250_PCI is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_83xx_WDT=y + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +CONFIG_I2C_MPC=y +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +CONFIG_SENSORS_PCF8574=y +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_M41T00 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BITBANG=y +CONFIG_SPI_MPC83xx=y + +# +# SPI Protocol Masters +# + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB is not set +# CONFIG_FB_IBM_GXT4500 is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +CONFIG_RTC_INTF_DEV_UIE_EMUL=y + +# +# RTC drivers +# +# CONFIG_RTC_DRV_X1205 is not set +CONFIG_RTC_DRV_DS1307=y +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_TEST is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# DMA Engine support +# +CONFIG_DMA_ENGINE=y + +# +# DMA Clients +# +CONFIG_NET_DMA=y + +# +# DMA Devices +# +CONFIG_INTEL_IOATDMA=y + +# +# Virtualization +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +CONFIG_MAC_PARTITION=y +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_IOMAP_COPY=y + +# +# Instrumentation Support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_BOOTX_TEXT is not set +# CONFIG_SERIAL_TEXT_DEBUG is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_ECB is not set +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# -- cgit v1.2.3 From a20d0ce694e56f94857eacdc8534357d798460fd Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Fri, 9 Feb 2007 10:01:50 -0600 Subject: [POWERPC] 83xx: Updated mpc834x_itx_defconfig This patch updates the defconfig for the MPC8349E-mITX. In addition to picking up changes from recent kernels, disables support for e100 (which doesn't ship with the system), turns off input devices, turns on some I2C support, turns off HW monitoring (HW not yet supported), turns off OHCI USB (not used), turns off USB gadget support (HW not yet supported), turns on DOS FS support, and turns off kernel debugging. Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala --- arch/powerpc/configs/mpc834x_itx_defconfig | 232 ++++++++--------------------- 1 file changed, 60 insertions(+), 172 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/configs/mpc834x_itx_defconfig b/arch/powerpc/configs/mpc834x_itx_defconfig index 7902806429f8..23d8964846e0 100644 --- a/arch/powerpc/configs/mpc834x_itx_defconfig +++ b/arch/powerpc/configs/mpc834x_itx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20-rc5 -# Fri Jan 26 00:19:02 2007 +# Linux kernel version: 2.6.20 +# Wed Feb 7 13:12:18 2007 # # CONFIG_PPC64 is not set CONFIG_PPC32=y @@ -34,9 +34,9 @@ CONFIG_DEFAULT_UIMAGE=y CONFIG_PPC_83xx=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_86xx is not set +# CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set -# CONFIG_8xx is not set # CONFIG_E200 is not set CONFIG_6xx=y CONFIG_83xx=y @@ -178,7 +178,6 @@ CONFIG_FSL_SOC=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_PCIEPORTBUS is not set -# CONFIG_PCI_DEBUG is not set # # PCCARD (PCMCIA/CardBus) support @@ -303,7 +302,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set -# CONFIG_DEBUG_DRIVER is not set # CONFIG_SYS_HYPERVISOR is not set # @@ -523,6 +521,7 @@ CONFIG_SCSI_SPI_ATTRS=y # Serial ATA (prod) and Parallel ATA (experimental) drivers # CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set @@ -647,37 +646,7 @@ CONFIG_CICADA_PHY=y # # Ethernet (10 or 100Mbit) # -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set -# CONFIG_EEPRO100 is not set -CONFIG_E100=y -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set +# CONFIG_NET_ETHERNET is not set # # Ethernet (1000 Mbit) @@ -693,7 +662,6 @@ CONFIG_E100=y # CONFIG_SKGE is not set # CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set CONFIG_GIANFAR=y @@ -746,26 +714,7 @@ CONFIG_GFAR_NAPI=y # # Input device support # -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set +# CONFIG_INPUT is not set # # Hardware I/O ports @@ -784,7 +733,7 @@ CONFIG_INPUT=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_PCI=y +# CONFIG_SERIAL_8250_PCI is not set CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set @@ -887,7 +836,7 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set +CONFIG_SENSORS_PCF8574=y # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_M41T00 is not set @@ -901,7 +850,6 @@ CONFIG_I2C_MPC=y # SPI support # CONFIG_SPI=y -# CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y # @@ -922,52 +870,8 @@ CONFIG_SPI_MPC83xx=y # # Hardware Monitoring support # -CONFIG_HWMON=y +# CONFIG_HWMON is not set # CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM70 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_PC87427 is not set -# CONFIG_SENSORS_SIS5595 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47M192 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_VT1211 is not set -# CONFIG_SENSORS_VT8231 is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83791D is not set -# CONFIG_SENSORS_W83792D is not set -# CONFIG_SENSORS_W83793 is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # # Multimedia devices @@ -983,7 +887,7 @@ CONFIG_HWMON=y # # Graphics support # -CONFIG_FIRMWARE_EDID=y +# CONFIG_FIRMWARE_EDID is not set # CONFIG_FB is not set # CONFIG_FB_IBM_GXT4500 is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set @@ -993,11 +897,6 @@ CONFIG_FIRMWARE_EDID=y # # CONFIG_SOUND is not set -# -# HID Devices -# -CONFIG_HID=y - # # USB support # @@ -1023,10 +922,8 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_ISP116X_HCD is not set -CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -CONFIG_USB_UHCI_HCD=y +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # @@ -1058,25 +955,10 @@ CONFIG_USB_STORAGE=y # # USB Input Devices # -# CONFIG_USB_HID is not set # # USB HID Boot Protocol drivers # -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_TOUCHSCREEN is not set -# CONFIG_USB_YEALINK is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_ATI_REMOTE2 is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set # # USB Imaging devices @@ -1133,25 +1015,7 @@ CONFIG_USB_MON=y # # USB Gadget Support # -CONFIG_USB_GADGET=y -# CONFIG_USB_GADGET_DEBUG_FILES is not set -CONFIG_USB_GADGET_SELECTED=y -CONFIG_USB_GADGET_NET2280=y -CONFIG_USB_NET2280=y -# CONFIG_USB_GADGET_PXA2XX is not set -# CONFIG_USB_GADGET_GOKU is not set -# CONFIG_USB_GADGET_LH7A40X is not set -# CONFIG_USB_GADGET_OMAP is not set -# CONFIG_USB_GADGET_AT91 is not set -# CONFIG_USB_GADGET_DUMMY_HCD is not set -CONFIG_USB_GADGET_DUALSPEED=y -# CONFIG_USB_ZERO is not set -CONFIG_USB_ETH=y -CONFIG_USB_ETH_RNDIS=y -# CONFIG_USB_GADGETFS is not set -# CONFIG_USB_FILE_STORAGE is not set -# CONFIG_USB_G_SERIAL is not set -# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_GADGET is not set # # MMC/SD Card support @@ -1273,8 +1137,11 @@ CONFIG_DNOTIFY=y # # DOS/FAT/NT Filesystems # -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # @@ -1340,7 +1207,7 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_OSF_PARTITION is not set # CONFIG_AMIGA_PARTITION is not set # CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set +CONFIG_MAC_PARTITION=y CONFIG_MSDOS_PARTITION=y # CONFIG_BSD_DISKLABEL is not set # CONFIG_MINIX_SUBPARTITION is not set @@ -1356,7 +1223,46 @@ CONFIG_MSDOS_PARTITION=y # # Native Language Support # -# CONFIG_NLS is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set # # Distributed Lock Manager @@ -1388,27 +1294,9 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_RWSEMS is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_LIST is not set -CONFIG_FORCED_INLINING=y -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_DEBUGGER is not set -# CONFIG_BDI_SWITCH is not set # CONFIG_BOOTX_TEXT is not set # CONFIG_SERIAL_TEXT_DEBUG is not set # CONFIG_PPC_EARLY_DEBUG is not set -- cgit v1.2.3 From 30a6c337dcefa7583fe9289fedb28783af980c0c Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 13 Feb 2007 21:36:45 +0100 Subject: [POWERPC] spufs: remove SPU_CONTEXT_PREEMPT Remove the SPU_CONTEXT_PREEMPT define. It's unused and won't be used in this form after the scheduler rework. Signed-off-by: Christoph Hellwig Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/spufs/spufs.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h index 0941c56df9b5..9b44abe921cc 100644 --- a/arch/powerpc/platforms/cell/spufs/spufs.h +++ b/arch/powerpc/platforms/cell/spufs/spufs.h @@ -37,9 +37,6 @@ enum { }; struct spu_context_ops; - -#define SPU_CONTEXT_PREEMPT 0UL - struct spu_gang; struct spu_context { -- cgit v1.2.3 From 5cb23afc9e64841adb43d46160a5c63a80ebfd54 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 13 Feb 2007 21:36:46 +0100 Subject: [POWERPC] spufs: remove empty last line in run.c Remove the empty last line in arch/powerpc/platforms/cell/spufs/run.c. Signed-off-by: Christoph Hellwig Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/spufs/run.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c index 1acc2ffef8c8..51b78da2f0d3 100644 --- a/arch/powerpc/platforms/cell/spufs/run.c +++ b/arch/powerpc/platforms/cell/spufs/run.c @@ -361,4 +361,3 @@ out: up(&ctx->run_sema); return ret; } - -- cgit v1.2.3 From aa56c16807ba7b8e801216cab012d2f498755ba5 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 13 Feb 2007 21:36:47 +0100 Subject: [POWERPC] spufs: remove superfluous SPU_STATE_SAVED assignments unbind_context already sets the context state to SPU_STATE_SAVED, thus the spu_deactivate callers don't need to do it again. Signed-off-by: Christoph Hellwig Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/spufs/context.c | 4 +--- arch/powerpc/platforms/cell/spufs/sched.c | 1 - 2 files changed, 1 insertion(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c index 28c718ca3b51..dd89aa7c1f16 100644 --- a/arch/powerpc/platforms/cell/spufs/context.c +++ b/arch/powerpc/platforms/cell/spufs/context.c @@ -197,10 +197,8 @@ void spu_acquire_saved(struct spu_context *ctx) up_read(&ctx->state_sema); down_write(&ctx->state_sema); - if (ctx->state == SPU_STATE_RUNNABLE) { + if (ctx->state == SPU_STATE_RUNNABLE) spu_deactivate(ctx); - ctx->state = SPU_STATE_SAVED; - } downgrade_write(&ctx->state_sema); } diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index bd6fe4b7a84b..6599cba9689b 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -315,7 +315,6 @@ void spu_yield(struct spu_context *ctx) pr_debug("%s: yielding SPU %d NODE %d\n", __FUNCTION__, spu->number, spu->node); spu_deactivate(ctx); - ctx->state = SPU_STATE_SAVED; need_yield = 1; } else { spu->prio = MAX_PRIO; -- cgit v1.2.3 From 81998bafe299b8b675157f0a4dfe8dad43215da9 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 13 Feb 2007 21:36:48 +0100 Subject: [POWERPC] spufs: bind_context sets SPU_STATE_RUNNABLE Only bind_context/unbind_context change the spu context state. Thus we can move all assignents of SPU_STATE_RUNNABLE into bind_context, which parallels the unbind side aswell. Signed-off-by: Christoph Hellwig Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/spufs/context.c | 2 -- arch/powerpc/platforms/cell/spufs/sched.c | 2 ++ 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c index dd89aa7c1f16..ccffc449763b 100644 --- a/arch/powerpc/platforms/cell/spufs/context.c +++ b/arch/powerpc/platforms/cell/spufs/context.c @@ -139,7 +139,6 @@ int spu_acquire_exclusive(struct spu_context *ctx) ret = spu_activate(ctx, 0); if (ret) goto out; - ctx->state = SPU_STATE_RUNNABLE; } else { /* We need to exclude userspace access to the context. */ spu_unmap_mappings(ctx); @@ -173,7 +172,6 @@ int spu_acquire_runnable(struct spu_context *ctx) ret = spu_activate(ctx, 0); if (ret) goto out; - ctx->state = SPU_STATE_RUNNABLE; } downgrade_write(&ctx->state_sema); diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index 6599cba9689b..7e9657eb690c 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -118,6 +118,8 @@ static inline void bind_context(struct spu *spu, struct spu_context *ctx) spu->timestamp = jiffies; spu_cpu_affinity_set(spu, raw_smp_processor_id()); spu_switch_notify(spu, ctx); + + ctx->state = SPU_STATE_RUNNABLE; } static inline void unbind_context(struct spu *spu, struct spu_context *ctx) -- cgit v1.2.3 From 202557d29eae528f464652e92085f3b19b05a0a7 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 13 Feb 2007 21:36:49 +0100 Subject: [POWERPC] spufs: sched.c cleanups Various cleanups to sched.c that don't change the global control flow: - add kerneldoc comments to various functions - add spu_ prefixes to various functions - add/remove context from the runqueue in bind/unbind_context as it's part of the logical operation - add a call to put_active_spu to spu_unbind_contex as it's logically part of the unbind operation Signed-off-by: Christoph Hellwig Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/spufs/sched.c | 98 +++++++++++++++++++------------ 1 file changed, 61 insertions(+), 37 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index 7e9657eb690c..1d330f67f5ae 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -68,6 +68,43 @@ static inline int node_allowed(int node) return 1; } +/** + * spu_add_to_active_list - add spu to active list + * @spu: spu to add to the active list + */ +static void spu_add_to_active_list(struct spu *spu) +{ + mutex_lock(&spu_prio->active_mutex[spu->node]); + list_add_tail(&spu->list, &spu_prio->active_list[spu->node]); + mutex_unlock(&spu_prio->active_mutex[spu->node]); +} + +/** + * spu_remove_from_active_list - remove spu from active list + * @spu: spu to remove from the active list + * + * This function removes an spu from the active list. If the spu was + * found on the active list the function returns 1, else it doesn't do + * anything and returns 0. + */ +static int spu_remove_from_active_list(struct spu *spu) +{ + int node = spu->node; + struct spu *tmp; + int rc = 0; + + mutex_lock(&spu_prio->active_mutex[node]); + list_for_each_entry(tmp, &spu_prio->active_list[node], list) { + if (tmp == spu) { + list_del_init(&spu->list); + rc = 1; + break; + } + } + mutex_unlock(&spu_prio->active_mutex[node]); + return rc; +} + static inline void mm_needs_global_tlbie(struct mm_struct *mm) { int nr = (NR_CPUS > 1) ? NR_CPUS : NR_CPUS + 1; @@ -94,8 +131,12 @@ int spu_switch_event_unregister(struct notifier_block * n) return blocking_notifier_chain_unregister(&spu_switch_notifier, n); } - -static inline void bind_context(struct spu *spu, struct spu_context *ctx) +/** + * spu_bind_context - bind spu context to physical spu + * @spu: physical spu to bind to + * @ctx: context to bind + */ +static void spu_bind_context(struct spu *spu, struct spu_context *ctx) { pr_debug("%s: pid=%d SPU=%d NODE=%d\n", __FUNCTION__, current->pid, spu->number, spu->node); @@ -118,14 +159,24 @@ static inline void bind_context(struct spu *spu, struct spu_context *ctx) spu->timestamp = jiffies; spu_cpu_affinity_set(spu, raw_smp_processor_id()); spu_switch_notify(spu, ctx); - + spu_add_to_active_list(spu); ctx->state = SPU_STATE_RUNNABLE; } -static inline void unbind_context(struct spu *spu, struct spu_context *ctx) +/** + * spu_unbind_context - unbind spu context from physical spu + * @spu: physical spu to unbind from + * @ctx: context to unbind + * + * If the spu was on the active list the function returns 1, else 0. + */ +static int spu_unbind_context(struct spu *spu, struct spu_context *ctx) { + int was_active = spu_remove_from_active_list(spu); + pr_debug("%s: unbind pid=%d SPU=%d NODE=%d\n", __FUNCTION__, spu->pid, spu->number, spu->node); + spu_switch_notify(spu, NULL); spu_unmap_mappings(ctx); spu_save(&ctx->csa, spu); @@ -143,6 +194,8 @@ static inline void unbind_context(struct spu *spu, struct spu_context *ctx) ctx->spu = NULL; spu->flags = 0; spu->ctx = NULL; + + return was_active; } static inline void spu_add_wq(wait_queue_head_t * wq, wait_queue_t * wait, @@ -199,33 +252,6 @@ static void spu_prio_wakeup(void) } } -static int get_active_spu(struct spu *spu) -{ - int node = spu->node; - struct spu *tmp; - int rc = 0; - - mutex_lock(&spu_prio->active_mutex[node]); - list_for_each_entry(tmp, &spu_prio->active_list[node], list) { - if (tmp == spu) { - list_del_init(&spu->list); - rc = 1; - break; - } - } - mutex_unlock(&spu_prio->active_mutex[node]); - return rc; -} - -static void put_active_spu(struct spu *spu) -{ - int node = spu->node; - - mutex_lock(&spu_prio->active_mutex[node]); - list_add_tail(&spu->list, &spu_prio->active_list[node]); - mutex_unlock(&spu_prio->active_mutex[node]); -} - static struct spu *spu_get_idle(struct spu_context *ctx, u64 flags) { struct spu *spu = NULL; @@ -275,8 +301,7 @@ int spu_activate(struct spu_context *ctx, u64 flags) spu_prio_wakeup(); break; } - bind_context(spu, ctx); - put_active_spu(spu); + spu_bind_context(spu, ctx); break; } spu_prio_wait(ctx, flags); @@ -292,14 +317,13 @@ int spu_activate(struct spu_context *ctx, u64 flags) void spu_deactivate(struct spu_context *ctx) { struct spu *spu; - int needs_idle; + int was_active; spu = ctx->spu; if (!spu) return; - needs_idle = get_active_spu(spu); - unbind_context(spu, ctx); - if (needs_idle) { + was_active = spu_unbind_context(spu, ctx); + if (was_active) { spu_free(spu); spu_prio_wakeup(); } -- cgit v1.2.3 From 650f8b0291ecd0abdeadbd0ff3d70c3538e55405 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 13 Feb 2007 21:36:50 +0100 Subject: [POWERPC] spufs: simplify state_mutex The r/w semaphore to lock the spus was overkill and can be replaced with a mutex to make it faster, simpler and easier to debug. It also helps to allow making most spufs interruptible in future patches. Signed-off-by: Christoph Hellwig Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/spufs/context.c | 33 +++++++++-------------------- arch/powerpc/platforms/cell/spufs/sched.c | 8 +++---- arch/powerpc/platforms/cell/spufs/spufs.h | 6 +++--- 3 files changed, 17 insertions(+), 30 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c index ccffc449763b..c9aab9b1cd8a 100644 --- a/arch/powerpc/platforms/cell/spufs/context.c +++ b/arch/powerpc/platforms/cell/spufs/context.c @@ -42,7 +42,7 @@ struct spu_context *alloc_spu_context(struct spu_gang *gang) } spin_lock_init(&ctx->mmio_lock); kref_init(&ctx->kref); - init_rwsem(&ctx->state_sema); + mutex_init(&ctx->state_mutex); init_MUTEX(&ctx->run_sema); init_waitqueue_head(&ctx->ibox_wq); init_waitqueue_head(&ctx->wbox_wq); @@ -65,9 +65,9 @@ void destroy_spu_context(struct kref *kref) { struct spu_context *ctx; ctx = container_of(kref, struct spu_context, kref); - down_write(&ctx->state_sema); + mutex_lock(&ctx->state_mutex); spu_deactivate(ctx); - up_write(&ctx->state_sema); + mutex_unlock(&ctx->state_mutex); spu_fini_csa(&ctx->csa); if (ctx->gang) spu_gang_remove_ctx(ctx->gang, ctx); @@ -98,12 +98,12 @@ void spu_forget(struct spu_context *ctx) void spu_acquire(struct spu_context *ctx) { - down_read(&ctx->state_sema); + mutex_lock(&ctx->state_mutex); } void spu_release(struct spu_context *ctx) { - up_read(&ctx->state_sema); + mutex_unlock(&ctx->state_mutex); } void spu_unmap_mappings(struct spu_context *ctx) @@ -128,7 +128,7 @@ int spu_acquire_exclusive(struct spu_context *ctx) { int ret = 0; - down_write(&ctx->state_sema); + mutex_lock(&ctx->state_mutex); /* ctx is about to be freed, can't acquire any more */ if (!ctx->owner) { ret = -EINVAL; @@ -146,7 +146,7 @@ int spu_acquire_exclusive(struct spu_context *ctx) out: if (ret) - up_write(&ctx->state_sema); + mutex_unlock(&ctx->state_mutex); return ret; } @@ -154,14 +154,12 @@ int spu_acquire_runnable(struct spu_context *ctx) { int ret = 0; - down_read(&ctx->state_sema); + mutex_lock(&ctx->state_mutex); if (ctx->state == SPU_STATE_RUNNABLE) { ctx->spu->prio = current->prio; return 0; } - up_read(&ctx->state_sema); - down_write(&ctx->state_sema); /* ctx is about to be freed, can't acquire any more */ if (!ctx->owner) { ret = -EINVAL; @@ -174,29 +172,18 @@ int spu_acquire_runnable(struct spu_context *ctx) goto out; } - downgrade_write(&ctx->state_sema); /* On success, we return holding the lock */ - return ret; out: /* Release here, to simplify calling code. */ - up_write(&ctx->state_sema); + mutex_unlock(&ctx->state_mutex); return ret; } void spu_acquire_saved(struct spu_context *ctx) { - down_read(&ctx->state_sema); - - if (ctx->state == SPU_STATE_SAVED) - return; - - up_read(&ctx->state_sema); - down_write(&ctx->state_sema); - + mutex_lock(&ctx->state_mutex); if (ctx->state == SPU_STATE_RUNNABLE) spu_deactivate(ctx); - - downgrade_write(&ctx->state_sema); } diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index 1d330f67f5ae..c61a34b14083 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -233,11 +233,11 @@ static void spu_prio_wait(struct spu_context *ctx, u64 flags) spu_add_wq(wq, &wait, prio); if (!signal_pending(current)) { - up_write(&ctx->state_sema); + mutex_unlock(&ctx->state_mutex); pr_debug("%s: pid=%d prio=%d\n", __FUNCTION__, current->pid, current->prio); schedule(); - down_write(&ctx->state_sema); + mutex_lock(&ctx->state_mutex); } spu_del_wq(wq, &wait, prio); @@ -334,7 +334,7 @@ void spu_yield(struct spu_context *ctx) struct spu *spu; int need_yield = 0; - if (down_write_trylock(&ctx->state_sema)) { + if (mutex_trylock(&ctx->state_mutex)) { if ((spu = ctx->spu) != NULL) { int best = sched_find_first_bit(spu_prio->bitmap); if (best < MAX_PRIO) { @@ -346,7 +346,7 @@ void spu_yield(struct spu_context *ctx) spu->prio = MAX_PRIO; } } - up_write(&ctx->state_sema); + mutex_unlock(&ctx->state_mutex); } if (unlikely(need_yield)) yield(); diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h index 9b44abe921cc..de2401afb226 100644 --- a/arch/powerpc/platforms/cell/spufs/spufs.h +++ b/arch/powerpc/platforms/cell/spufs/spufs.h @@ -23,7 +23,7 @@ #define SPUFS_H #include -#include +#include #include #include @@ -53,7 +53,7 @@ struct spu_context { u64 object_id; /* user space pointer for oprofile */ enum { SPU_STATE_RUNNABLE, SPU_STATE_SAVED } state; - struct rw_semaphore state_sema; + struct mutex state_mutex; struct semaphore run_sema; struct mm_struct *owner; @@ -173,7 +173,7 @@ int spu_acquire_exclusive(struct spu_context *ctx); static inline void spu_release_exclusive(struct spu_context *ctx) { - up_write(&ctx->state_sema); + mutex_unlock(&ctx->state_mutex); } int spu_activate(struct spu_context *ctx, u64 flags); -- cgit v1.2.3 From 6a0641e51011def4e308fd07387047f5ee50647f Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 13 Feb 2007 21:54:21 +0100 Subject: [POWERPC] spufs: state_mutex cleanup Various cleanups in code surrounding the state semaphore: - inline spu_acquire/spu_release - cleanup spu_acquire_* and add kerneldoc comments to these functions - remove spu_release_exclusive and replace it with spu_release Signed-off-by: Christoph Hellwig Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/spufs/context.c | 97 ++++++++++++++++------------- arch/powerpc/platforms/cell/spufs/run.c | 2 +- arch/powerpc/platforms/cell/spufs/spufs.h | 18 +++--- 3 files changed, 64 insertions(+), 53 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c index c9aab9b1cd8a..f2630dc0db89 100644 --- a/arch/powerpc/platforms/cell/spufs/context.c +++ b/arch/powerpc/platforms/cell/spufs/context.c @@ -96,16 +96,6 @@ void spu_forget(struct spu_context *ctx) spu_release(ctx); } -void spu_acquire(struct spu_context *ctx) -{ - mutex_lock(&ctx->state_mutex); -} - -void spu_release(struct spu_context *ctx) -{ - mutex_unlock(&ctx->state_mutex); -} - void spu_unmap_mappings(struct spu_context *ctx) { if (ctx->local_store) @@ -124,66 +114,85 @@ void spu_unmap_mappings(struct spu_context *ctx) unmap_mapping_range(ctx->psmap, 0, 0x20000, 1); } +/** + * spu_acquire_exclusive - lock spu contex and protect against userspace access + * @ctx: spu contex to lock + * + * Note: + * Returns 0 and with the context locked on success + * Returns negative error and with the context _unlocked_ on failure. + */ int spu_acquire_exclusive(struct spu_context *ctx) { - int ret = 0; + int ret = -EINVAL; - mutex_lock(&ctx->state_mutex); - /* ctx is about to be freed, can't acquire any more */ - if (!ctx->owner) { - ret = -EINVAL; - goto out; - } + spu_acquire(ctx); + /* + * Context is about to be freed, so we can't acquire it anymore. + */ + if (!ctx->owner) + goto out_unlock; if (ctx->state == SPU_STATE_SAVED) { ret = spu_activate(ctx, 0); if (ret) - goto out; + goto out_unlock; } else { - /* We need to exclude userspace access to the context. */ + /* + * We need to exclude userspace access to the context. + * + * To protect against memory access we invalidate all ptes + * and make sure the pagefault handlers block on the mutex. + */ spu_unmap_mappings(ctx); } -out: - if (ret) - mutex_unlock(&ctx->state_mutex); + return 0; + + out_unlock: + spu_release(ctx); return ret; } +/** + * spu_acquire_runnable - lock spu contex and make sure it is in runnable state + * @ctx: spu contex to lock + * + * Note: + * Returns 0 and with the context locked on success + * Returns negative error and with the context _unlocked_ on failure. + */ int spu_acquire_runnable(struct spu_context *ctx) { - int ret = 0; - - mutex_lock(&ctx->state_mutex); - if (ctx->state == SPU_STATE_RUNNABLE) { - ctx->spu->prio = current->prio; - return 0; - } - - /* ctx is about to be freed, can't acquire any more */ - if (!ctx->owner) { - ret = -EINVAL; - goto out; - } + int ret = -EINVAL; + spu_acquire(ctx); if (ctx->state == SPU_STATE_SAVED) { + /* + * Context is about to be freed, so we can't acquire it anymore. + */ + if (!ctx->owner) + goto out_unlock; ret = spu_activate(ctx, 0); if (ret) - goto out; - } + goto out_unlock; + } else + ctx->spu->prio = current->prio; - /* On success, we return holding the lock */ - return ret; -out: - /* Release here, to simplify calling code. */ - mutex_unlock(&ctx->state_mutex); + return 0; + out_unlock: + spu_release(ctx); return ret; } +/** + * spu_acquire_saved - lock spu contex and make sure it is in saved state + * @ctx: spu contex to lock + */ void spu_acquire_saved(struct spu_context *ctx) { - mutex_lock(&ctx->state_mutex); - if (ctx->state == SPU_STATE_RUNNABLE) + spu_acquire(ctx); + if (ctx->state != SPU_STATE_SAVED) spu_deactivate(ctx); } diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c index 51b78da2f0d3..e1647311044b 100644 --- a/arch/powerpc/platforms/cell/spufs/run.c +++ b/arch/powerpc/platforms/cell/spufs/run.c @@ -133,7 +133,7 @@ out_drop_priv: spu_mfc_sr1_set(ctx->spu, sr1); out_unlock: - spu_release_exclusive(ctx); + spu_release(ctx); out: return ret; } diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h index de2401afb226..fa07ec2e2c1a 100644 --- a/arch/powerpc/platforms/cell/spufs/spufs.h +++ b/arch/powerpc/platforms/cell/spufs/spufs.h @@ -158,6 +158,16 @@ void spu_gang_remove_ctx(struct spu_gang *gang, struct spu_context *ctx); void spu_gang_add_ctx(struct spu_gang *gang, struct spu_context *ctx); /* context management */ +static inline void spu_acquire(struct spu_context *ctx) +{ + mutex_lock(&ctx->state_mutex); +} + +static inline void spu_release(struct spu_context *ctx) +{ + mutex_unlock(&ctx->state_mutex); +} + struct spu_context * alloc_spu_context(struct spu_gang *gang); void destroy_spu_context(struct kref *kref); struct spu_context * get_spu_context(struct spu_context *ctx); @@ -165,17 +175,9 @@ int put_spu_context(struct spu_context *ctx); void spu_unmap_mappings(struct spu_context *ctx); void spu_forget(struct spu_context *ctx); -void spu_acquire(struct spu_context *ctx); -void spu_release(struct spu_context *ctx); int spu_acquire_runnable(struct spu_context *ctx); void spu_acquire_saved(struct spu_context *ctx); int spu_acquire_exclusive(struct spu_context *ctx); - -static inline void spu_release_exclusive(struct spu_context *ctx) -{ - mutex_unlock(&ctx->state_mutex); -} - int spu_activate(struct spu_context *ctx, u64 flags); void spu_deactivate(struct spu_context *ctx); void spu_yield(struct spu_context *ctx); -- cgit v1.2.3 From 8389998ae9ea2888c86c446f7911ddced50052a1 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 13 Feb 2007 21:54:22 +0100 Subject: [POWERPC] spufs: move prio to spu_context It doesn't make any sense to have a priority field in the physical spu structure. Move it into the spu context instead. Signed-off-by: Christoph Hellwig Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/spufs/context.c | 4 ++-- arch/powerpc/platforms/cell/spufs/sched.c | 6 +----- arch/powerpc/platforms/cell/spufs/spufs.h | 3 +++ arch/powerpc/xmon/xmon.c | 1 - 4 files changed, 6 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c index f2630dc0db89..88a887186303 100644 --- a/arch/powerpc/platforms/cell/spufs/context.c +++ b/arch/powerpc/platforms/cell/spufs/context.c @@ -53,6 +53,7 @@ struct spu_context *alloc_spu_context(struct spu_gang *gang) ctx->owner = get_task_mm(current); if (gang) spu_gang_add_ctx(gang, ctx); + ctx->prio = current->prio; goto out; out_free: kfree(ctx); @@ -176,8 +177,7 @@ int spu_acquire_runnable(struct spu_context *ctx) ret = spu_activate(ctx, 0); if (ret) goto out_unlock; - } else - ctx->spu->prio = current->prio; + } return 0; diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index c61a34b14083..03b357ce3987 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -145,7 +145,6 @@ static void spu_bind_context(struct spu *spu, struct spu_context *ctx) ctx->spu = spu; ctx->ops = &spu_hw_ops; spu->pid = current->pid; - spu->prio = current->prio; spu->mm = ctx->owner; mm_needs_global_tlbie(spu->mm); spu->ibox_callback = spufs_ibox_callback; @@ -189,7 +188,6 @@ static int spu_unbind_context(struct spu *spu, struct spu_context *ctx) spu->dma_callback = NULL; spu->mm = NULL; spu->pid = 0; - spu->prio = MAX_PRIO; ctx->ops = &spu_backing_ops; ctx->spu = NULL; spu->flags = 0; @@ -223,7 +221,7 @@ static inline void spu_del_wq(wait_queue_head_t * wq, wait_queue_t * wait, static void spu_prio_wait(struct spu_context *ctx, u64 flags) { - int prio = current->prio; + int prio = ctx->prio; wait_queue_head_t *wq = &spu_prio->waitq[prio]; DEFINE_WAIT(wait); @@ -342,8 +340,6 @@ void spu_yield(struct spu_context *ctx) __FUNCTION__, spu->number, spu->node); spu_deactivate(ctx); need_yield = 1; - } else { - spu->prio = MAX_PRIO; } } mutex_unlock(&ctx->state_mutex); diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h index fa07ec2e2c1a..b500e94188b5 100644 --- a/arch/powerpc/platforms/cell/spufs/spufs.h +++ b/arch/powerpc/platforms/cell/spufs/spufs.h @@ -74,6 +74,9 @@ struct spu_context { struct list_head gang_list; struct spu_gang *gang; + + /* scheduler fields */ + int prio; }; struct spu_gang { diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index 77540a2f7704..0183e5fbaf46 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -2811,7 +2811,6 @@ static void dump_spu_fields(struct spu *spu) DUMP_FIELD(spu, "0x%lx", irqs[2]); DUMP_FIELD(spu, "0x%x", slb_replace); DUMP_FIELD(spu, "%d", pid); - DUMP_FIELD(spu, "%d", prio); DUMP_FIELD(spu, "0x%p", mm); DUMP_FIELD(spu, "0x%p", ctx); DUMP_FIELD(spu, "0x%p", rq); -- cgit v1.2.3 From 079cdb61614c466c939ebf74c7ef6745667bc61e Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 13 Feb 2007 21:54:23 +0100 Subject: [POWERPC] spufs: runqueue simplification This is the biggest patch in this series, and it reworks the guts of the spu scheduler runqueue mechanism: - instead of embedding a waitqueue in the runqueue there is now a simple doubly-linked list, the actual wakeups happen by reusing the stop_wq in the spu context (maybe we should rename it one day) - spu_free and spu_prio_wakeup are merged into a single spu_reschedule function - various functionality is split out into small helpers, and kerneldoc comments are added in various places to document what's going on. - spu_activate is rewritten into a tight loop by removing test for various impossible conditions and using the infrastructure in this patch. Signed-off-by: Christoph Hellwig Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/spufs/sched.c | 159 +++++++++++++++++------------- arch/powerpc/platforms/cell/spufs/spufs.h | 1 + 2 files changed, 93 insertions(+), 67 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index 03b357ce3987..6f8e2257c5a6 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -49,7 +49,8 @@ #define SPU_BITMAP_SIZE (((MAX_PRIO+BITS_PER_LONG)/BITS_PER_LONG)+1) struct spu_prio_array { unsigned long bitmap[SPU_BITMAP_SIZE]; - wait_queue_head_t waitq[MAX_PRIO]; + struct list_head runq[MAX_PRIO]; + spinlock_t runq_lock; struct list_head active_list[MAX_NUMNODES]; struct mutex active_mutex[MAX_NUMNODES]; }; @@ -196,61 +197,91 @@ static int spu_unbind_context(struct spu *spu, struct spu_context *ctx) return was_active; } -static inline void spu_add_wq(wait_queue_head_t * wq, wait_queue_t * wait, - int prio) +/** + * spu_add_to_rq - add a context to the runqueue + * @ctx: context to add + */ +static void spu_add_to_rq(struct spu_context *ctx) { - prepare_to_wait_exclusive(wq, wait, TASK_INTERRUPTIBLE); - set_bit(prio, spu_prio->bitmap); + spin_lock(&spu_prio->runq_lock); + list_add_tail(&ctx->rq, &spu_prio->runq[ctx->prio]); + set_bit(ctx->prio, spu_prio->bitmap); + spin_unlock(&spu_prio->runq_lock); } -static inline void spu_del_wq(wait_queue_head_t * wq, wait_queue_t * wait, - int prio) +/** + * spu_del_from_rq - remove a context from the runqueue + * @ctx: context to remove + */ +static void spu_del_from_rq(struct spu_context *ctx) { - u64 flags; - - __set_current_state(TASK_RUNNING); - - spin_lock_irqsave(&wq->lock, flags); + spin_lock(&spu_prio->runq_lock); + list_del_init(&ctx->rq); + if (list_empty(&spu_prio->runq[ctx->prio])) + clear_bit(ctx->prio, spu_prio->bitmap); + spin_unlock(&spu_prio->runq_lock); +} - remove_wait_queue_locked(wq, wait); - if (list_empty(&wq->task_list)) - clear_bit(prio, spu_prio->bitmap); +/** + * spu_grab_context - remove one context from the runqueue + * @prio: priority of the context to be removed + * + * This function removes one context from the runqueue for priority @prio. + * If there is more than one context with the given priority the first + * task on the runqueue will be taken. + * + * Returns the spu_context it just removed. + * + * Must be called with spu_prio->runq_lock held. + */ +static struct spu_context *spu_grab_context(int prio) +{ + struct list_head *rq = &spu_prio->runq[prio]; - spin_unlock_irqrestore(&wq->lock, flags); + if (list_empty(rq)) + return NULL; + return list_entry(rq->next, struct spu_context, rq); } -static void spu_prio_wait(struct spu_context *ctx, u64 flags) +static void spu_prio_wait(struct spu_context *ctx) { - int prio = ctx->prio; - wait_queue_head_t *wq = &spu_prio->waitq[prio]; DEFINE_WAIT(wait); - if (ctx->spu) - return; - - spu_add_wq(wq, &wait, prio); + prepare_to_wait_exclusive(&ctx->stop_wq, &wait, TASK_INTERRUPTIBLE); if (!signal_pending(current)) { mutex_unlock(&ctx->state_mutex); - pr_debug("%s: pid=%d prio=%d\n", __FUNCTION__, - current->pid, current->prio); schedule(); mutex_lock(&ctx->state_mutex); } - - spu_del_wq(wq, &wait, prio); + __set_current_state(TASK_RUNNING); + remove_wait_queue(&ctx->stop_wq, &wait); } -static void spu_prio_wakeup(void) +/** + * spu_reschedule - try to find a runnable context for a spu + * @spu: spu available + * + * This function is called whenever a spu becomes idle. It looks for the + * most suitable runnable spu context and schedules it for execution. + */ +static void spu_reschedule(struct spu *spu) { - int best = sched_find_first_bit(spu_prio->bitmap); + int best; + + spu_free(spu); + + spin_lock(&spu_prio->runq_lock); + best = sched_find_first_bit(spu_prio->bitmap); if (best < MAX_PRIO) { - wait_queue_head_t *wq = &spu_prio->waitq[best]; - wake_up_interruptible_nr(wq, 1); + struct spu_context *ctx = spu_grab_context(best); + if (ctx) + wake_up(&ctx->stop_wq); } + spin_unlock(&spu_prio->runq_lock); } -static struct spu *spu_get_idle(struct spu_context *ctx, u64 flags) +static struct spu *spu_get_idle(struct spu_context *ctx) { struct spu *spu = NULL; int node = cpu_to_node(raw_smp_processor_id()); @@ -267,15 +298,6 @@ static struct spu *spu_get_idle(struct spu_context *ctx, u64 flags) return spu; } -static inline struct spu *spu_get(struct spu_context *ctx, u64 flags) -{ - /* Future: spu_get_idle() if possible, - * otherwise try to preempt an active - * context. - */ - return spu_get_idle(ctx, flags); -} - /* The three externally callable interfaces * for the scheduler begin here. * @@ -284,32 +306,36 @@ static inline struct spu *spu_get(struct spu_context *ctx, u64 flags) * spu_yield - yield an SPU if others are waiting. */ +/** + * spu_activate - find a free spu for a context and execute it + * @ctx: spu context to schedule + * @flags: flags (currently ignored) + * + * Tries to find a free spu to run @ctx. If no free spu is availble + * add the context to the runqueue so it gets woken up once an spu + * is available. + */ int spu_activate(struct spu_context *ctx, u64 flags) { - struct spu *spu; - int ret = 0; - for (;;) { - if (ctx->spu) - return 0; - spu = spu_get(ctx, flags); - if (spu != NULL) { - if (ctx->spu != NULL) { - spu_free(spu); - spu_prio_wakeup(); - break; - } + if (ctx->spu) + return 0; + + do { + struct spu *spu; + + spu = spu_get_idle(ctx); + if (spu) { spu_bind_context(spu, ctx); - break; - } - spu_prio_wait(ctx, flags); - if (signal_pending(current)) { - ret = -ERESTARTSYS; - spu_prio_wakeup(); - break; + return 0; } - } - return ret; + + spu_add_to_rq(ctx); + spu_prio_wait(ctx); + spu_del_from_rq(ctx); + } while (!signal_pending(current)); + + return -ERESTARTSYS; } void spu_deactivate(struct spu_context *ctx) @@ -321,10 +347,8 @@ void spu_deactivate(struct spu_context *ctx) if (!spu) return; was_active = spu_unbind_context(spu, ctx); - if (was_active) { - spu_free(spu); - spu_prio_wakeup(); - } + if (was_active) + spu_reschedule(spu); } void spu_yield(struct spu_context *ctx) @@ -359,7 +383,7 @@ int __init spu_sched_init(void) return 1; } for (i = 0; i < MAX_PRIO; i++) { - init_waitqueue_head(&spu_prio->waitq[i]); + INIT_LIST_HEAD(&spu_prio->runq[i]); __clear_bit(i, spu_prio->bitmap); } __set_bit(MAX_PRIO, spu_prio->bitmap); @@ -367,6 +391,7 @@ int __init spu_sched_init(void) mutex_init(&spu_prio->active_mutex[i]); INIT_LIST_HEAD(&spu_prio->active_list[i]); } + spin_lock_init(&spu_prio->runq_lock); return 0; } diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h index b500e94188b5..7f5a4fc03c00 100644 --- a/arch/powerpc/platforms/cell/spufs/spufs.h +++ b/arch/powerpc/platforms/cell/spufs/spufs.h @@ -76,6 +76,7 @@ struct spu_context { struct spu_gang *gang; /* scheduler fields */ + struct list_head rq; int prio; }; -- cgit v1.2.3 From 26bec67386dbf6ef887254e815398842e182cdcd Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 13 Feb 2007 21:54:24 +0100 Subject: [POWERPC] spufs: optimize spu_run There is no need to directly wake up contexts in spu_activate when called from spu_run, so add a flag to surpress this wakeup. Signed-off-by: Christoph Hellwig Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/spufs/context.c | 4 ++-- arch/powerpc/platforms/cell/spufs/file.c | 4 ++-- arch/powerpc/platforms/cell/spufs/run.c | 4 ++-- arch/powerpc/platforms/cell/spufs/sched.c | 10 ++++++---- arch/powerpc/platforms/cell/spufs/spufs.h | 13 +++++++++++-- 5 files changed, 23 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c index 88a887186303..056a8ad02385 100644 --- a/arch/powerpc/platforms/cell/spufs/context.c +++ b/arch/powerpc/platforms/cell/spufs/context.c @@ -163,7 +163,7 @@ int spu_acquire_exclusive(struct spu_context *ctx) * Returns 0 and with the context locked on success * Returns negative error and with the context _unlocked_ on failure. */ -int spu_acquire_runnable(struct spu_context *ctx) +int spu_acquire_runnable(struct spu_context *ctx, unsigned long flags) { int ret = -EINVAL; @@ -174,7 +174,7 @@ int spu_acquire_runnable(struct spu_context *ctx) */ if (!ctx->owner) goto out_unlock; - ret = spu_activate(ctx, 0); + ret = spu_activate(ctx, flags); if (ret) goto out_unlock; } diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c index a528020baa18..c729813043a6 100644 --- a/arch/powerpc/platforms/cell/spufs/file.c +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -164,7 +164,7 @@ static unsigned long spufs_ps_nopfn(struct vm_area_struct *vma, /* error here usually means a signal.. we might want to test * the error code more precisely though */ - ret = spu_acquire_runnable(ctx); + ret = spu_acquire_runnable(ctx, 0); if (ret) return NOPFN_REFAULT; @@ -1306,7 +1306,7 @@ static ssize_t spufs_mfc_write(struct file *file, const char __user *buffer, if (ret) goto out; - spu_acquire_runnable(ctx); + spu_acquire_runnable(ctx, 0); if (file->f_flags & O_NONBLOCK) { ret = ctx->ops->send_mfc_command(ctx, &cmd); } else { diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c index e1647311044b..a973e79e9fdc 100644 --- a/arch/powerpc/platforms/cell/spufs/run.c +++ b/arch/powerpc/platforms/cell/spufs/run.c @@ -143,7 +143,7 @@ static inline int spu_run_init(struct spu_context *ctx, u32 * npc) int ret; unsigned long runcntl = SPU_RUNCNTL_RUNNABLE; - ret = spu_acquire_runnable(ctx); + ret = spu_acquire_runnable(ctx, SPU_ACTIVATE_NOWAKE); if (ret) return ret; @@ -155,7 +155,7 @@ static inline int spu_run_init(struct spu_context *ctx, u32 * npc) spu_release(ctx); ret = spu_setup_isolated(ctx); if (!ret) - ret = spu_acquire_runnable(ctx); + ret = spu_acquire_runnable(ctx, SPU_ACTIVATE_NOWAKE); } /* if userspace has set the runcntrl register (eg, to issue an diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index 6f8e2257c5a6..07d0d095c62a 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -247,8 +247,8 @@ static void spu_prio_wait(struct spu_context *ctx) { DEFINE_WAIT(wait); + set_bit(SPU_SCHED_WAKE, &ctx->sched_flags); prepare_to_wait_exclusive(&ctx->stop_wq, &wait, TASK_INTERRUPTIBLE); - if (!signal_pending(current)) { mutex_unlock(&ctx->state_mutex); schedule(); @@ -256,6 +256,7 @@ static void spu_prio_wait(struct spu_context *ctx) } __set_current_state(TASK_RUNNING); remove_wait_queue(&ctx->stop_wq, &wait); + clear_bit(SPU_SCHED_WAKE, &ctx->sched_flags); } /** @@ -275,7 +276,7 @@ static void spu_reschedule(struct spu *spu) best = sched_find_first_bit(spu_prio->bitmap); if (best < MAX_PRIO) { struct spu_context *ctx = spu_grab_context(best); - if (ctx) + if (ctx && test_bit(SPU_SCHED_WAKE, &ctx->sched_flags)) wake_up(&ctx->stop_wq); } spin_unlock(&spu_prio->runq_lock); @@ -315,7 +316,7 @@ static struct spu *spu_get_idle(struct spu_context *ctx) * add the context to the runqueue so it gets woken up once an spu * is available. */ -int spu_activate(struct spu_context *ctx, u64 flags) +int spu_activate(struct spu_context *ctx, unsigned long flags) { if (ctx->spu) @@ -331,7 +332,8 @@ int spu_activate(struct spu_context *ctx, u64 flags) } spu_add_to_rq(ctx); - spu_prio_wait(ctx); + if (!(flags & SPU_ACTIVATE_NOWAKE)) + spu_prio_wait(ctx); spu_del_from_rq(ctx); } while (!signal_pending(current)); diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h index 7f5a4fc03c00..421f59167c55 100644 --- a/arch/powerpc/platforms/cell/spufs/spufs.h +++ b/arch/powerpc/platforms/cell/spufs/spufs.h @@ -39,6 +39,11 @@ enum { struct spu_context_ops; struct spu_gang; +/* ctx->sched_flags */ +enum { + SPU_SCHED_WAKE = 0, +}; + struct spu_context { struct spu *spu; /* pointer to a physical SPU */ struct spu_state csa; /* SPU context save area. */ @@ -77,6 +82,7 @@ struct spu_context { /* scheduler fields */ struct list_head rq; + unsigned long sched_flags; int prio; }; @@ -179,10 +185,13 @@ int put_spu_context(struct spu_context *ctx); void spu_unmap_mappings(struct spu_context *ctx); void spu_forget(struct spu_context *ctx); -int spu_acquire_runnable(struct spu_context *ctx); +int spu_acquire_runnable(struct spu_context *ctx, unsigned long flags); void spu_acquire_saved(struct spu_context *ctx); int spu_acquire_exclusive(struct spu_context *ctx); -int spu_activate(struct spu_context *ctx, u64 flags); +enum { + SPU_ACTIVATE_NOWAKE = 1, +}; +int spu_activate(struct spu_context *ctx, unsigned long flags); void spu_deactivate(struct spu_context *ctx); void spu_yield(struct spu_context *ctx); int __init spu_sched_init(void); -- cgit v1.2.3 From 678b2ff1e65ecccdb15cbfe97081572fc35944b7 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 13 Feb 2007 21:54:25 +0100 Subject: [POWERPC] spu sched: simplity spu_remove_from_active_list If we call spu_remove_from_active_list that spu is always guaranteed to be on the active list and in runnable state, so we can simply do a list_del to remove it and unconditionally take the was_active codepath. Signed-off-by: Christoph Hellwig Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/spufs/sched.c | 44 +++++++++++-------------------- 1 file changed, 15 insertions(+), 29 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index 07d0d095c62a..40202a752a7a 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -83,27 +83,14 @@ static void spu_add_to_active_list(struct spu *spu) /** * spu_remove_from_active_list - remove spu from active list * @spu: spu to remove from the active list - * - * This function removes an spu from the active list. If the spu was - * found on the active list the function returns 1, else it doesn't do - * anything and returns 0. */ -static int spu_remove_from_active_list(struct spu *spu) +static void spu_remove_from_active_list(struct spu *spu) { int node = spu->node; - struct spu *tmp; - int rc = 0; mutex_lock(&spu_prio->active_mutex[node]); - list_for_each_entry(tmp, &spu_prio->active_list[node], list) { - if (tmp == spu) { - list_del_init(&spu->list); - rc = 1; - break; - } - } + list_del_init(&spu->list); mutex_unlock(&spu_prio->active_mutex[node]); - return rc; } static inline void mm_needs_global_tlbie(struct mm_struct *mm) @@ -167,16 +154,13 @@ static void spu_bind_context(struct spu *spu, struct spu_context *ctx) * spu_unbind_context - unbind spu context from physical spu * @spu: physical spu to unbind from * @ctx: context to unbind - * - * If the spu was on the active list the function returns 1, else 0. */ -static int spu_unbind_context(struct spu *spu, struct spu_context *ctx) +static void spu_unbind_context(struct spu *spu, struct spu_context *ctx) { - int was_active = spu_remove_from_active_list(spu); - pr_debug("%s: unbind pid=%d SPU=%d NODE=%d\n", __FUNCTION__, spu->pid, spu->number, spu->node); + spu_remove_from_active_list(spu); spu_switch_notify(spu, NULL); spu_unmap_mappings(ctx); spu_save(&ctx->csa, spu); @@ -193,8 +177,6 @@ static int spu_unbind_context(struct spu *spu, struct spu_context *ctx) ctx->spu = NULL; spu->flags = 0; spu->ctx = NULL; - - return was_active; } /** @@ -340,17 +322,21 @@ int spu_activate(struct spu_context *ctx, unsigned long flags) return -ERESTARTSYS; } +/** + * spu_deactivate - unbind a context from it's physical spu + * @ctx: spu context to unbind + * + * Unbind @ctx from the physical spu it is running on and schedule + * the highest priority context to run on the freed physical spu. + */ void spu_deactivate(struct spu_context *ctx) { - struct spu *spu; - int was_active; + struct spu *spu = ctx->spu; - spu = ctx->spu; - if (!spu) - return; - was_active = spu_unbind_context(spu, ctx); - if (was_active) + if (spu) { + spu_unbind_context(spu, ctx); spu_reschedule(spu); + } } void spu_yield(struct spu_context *ctx) -- cgit v1.2.3 From ae7b4c5284d11d49ed9432c16505fcbeb8d3b8cf Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 13 Feb 2007 21:54:26 +0100 Subject: [POWERPC] spu sched: update some comments Give spu_yield a kerneldoc comment and remove the old comment documenting spu_activate, spu_deactive and spu_yield as all of them now have descriptive kerneldoc comments of their own. Signed-off-by: Christoph Hellwig Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/spufs/sched.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index 40202a752a7a..eb06a030ca09 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -281,14 +281,6 @@ static struct spu *spu_get_idle(struct spu_context *ctx) return spu; } -/* The three externally callable interfaces - * for the scheduler begin here. - * - * spu_activate - bind a context to SPU, waiting as needed. - * spu_deactivate - unbind a context from its SPU. - * spu_yield - yield an SPU if others are waiting. - */ - /** * spu_activate - find a free spu for a context and execute it * @ctx: spu context to schedule @@ -339,6 +331,14 @@ void spu_deactivate(struct spu_context *ctx) } } +/** + * spu_yield - yield a physical spu if others are waiting + * @ctx: spu context to yield + * + * Check if there is a higher priority context waiting and if yes + * unbind @ctx from the physical spu and schedule the highest + * priority context to run on the freed physical spu instead. + */ void spu_yield(struct spu_context *ctx) { struct spu *spu; -- cgit v1.2.3 From 52f04fcf66a5d5d90790d6cfde52e391ecf2b882 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 13 Feb 2007 21:54:27 +0100 Subject: [POWERPC] spu sched: forced preemption at execution If we start a spu context with realtime priority we want it to run immediately and not wait until some other lower priority thread has finished. Try to find a suitable victim and use it's spu in this case. Signed-off-by: Christoph Hellwig Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/spufs/context.c | 1 + arch/powerpc/platforms/cell/spufs/sched.c | 74 +++++++++++++++++++++++++++++ arch/powerpc/platforms/cell/spufs/spufs.h | 1 + 3 files changed, 76 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c index 056a8ad02385..d581f4ec99ba 100644 --- a/arch/powerpc/platforms/cell/spufs/context.c +++ b/arch/powerpc/platforms/cell/spufs/context.c @@ -53,6 +53,7 @@ struct spu_context *alloc_spu_context(struct spu_gang *gang) ctx->owner = get_task_mm(current); if (gang) spu_gang_add_ctx(gang, ctx); + ctx->rt_priority = current->rt_priority; ctx->prio = current->prio; goto out; out_free: diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index eb06a030ca09..814f65e025f1 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -281,6 +281,74 @@ static struct spu *spu_get_idle(struct spu_context *ctx) return spu; } +/** + * find_victim - find a lower priority context to preempt + * @ctx: canidate context for running + * + * Returns the freed physical spu to run the new context on. + */ +static struct spu *find_victim(struct spu_context *ctx) +{ + struct spu_context *victim = NULL; + struct spu *spu; + int node, n; + + /* + * Look for a possible preemption candidate on the local node first. + * If there is no candidate look at the other nodes. This isn't + * exactly fair, but so far the whole spu schedule tries to keep + * a strong node affinity. We might want to fine-tune this in + * the future. + */ + restart: + node = cpu_to_node(raw_smp_processor_id()); + for (n = 0; n < MAX_NUMNODES; n++, node++) { + node = (node < MAX_NUMNODES) ? node : 0; + if (!node_allowed(node)) + continue; + + mutex_lock(&spu_prio->active_mutex[node]); + list_for_each_entry(spu, &spu_prio->active_list[node], list) { + struct spu_context *tmp = spu->ctx; + + if (tmp->rt_priority < ctx->rt_priority && + (!victim || tmp->rt_priority < victim->rt_priority)) + victim = spu->ctx; + } + mutex_unlock(&spu_prio->active_mutex[node]); + + if (victim) { + /* + * This nests ctx->state_mutex, but we always lock + * higher priority contexts before lower priority + * ones, so this is safe until we introduce + * priority inheritance schemes. + */ + if (!mutex_trylock(&victim->state_mutex)) { + victim = NULL; + goto restart; + } + + spu = victim->spu; + if (!spu) { + /* + * This race can happen because we've dropped + * the active list mutex. No a problem, just + * restart the search. + */ + mutex_unlock(&victim->state_mutex); + victim = NULL; + goto restart; + } + spu_unbind_context(spu, victim); + mutex_unlock(&victim->state_mutex); + return spu; + } + } + + return NULL; +} + /** * spu_activate - find a free spu for a context and execute it * @ctx: spu context to schedule @@ -300,6 +368,12 @@ int spu_activate(struct spu_context *ctx, unsigned long flags) struct spu *spu; spu = spu_get_idle(ctx); + /* + * If this is a realtime thread we try to get it running by + * preempting a lower priority thread. + */ + if (!spu && ctx->rt_priority) + spu = find_victim(ctx); if (spu) { spu_bind_context(spu, ctx); return 0; diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h index 421f59167c55..85b182d16464 100644 --- a/arch/powerpc/platforms/cell/spufs/spufs.h +++ b/arch/powerpc/platforms/cell/spufs/spufs.h @@ -83,6 +83,7 @@ struct spu_context { /* scheduler fields */ struct list_head rq; unsigned long sched_flags; + unsigned long rt_priority; int prio; }; -- cgit v1.2.3 From 72cb360839f88c02ccf38f1df214316e05886ff3 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 13 Feb 2007 21:54:28 +0100 Subject: [POWERPC] spu sched: use DECLARE_BITMAP use DECLARE_BITMAP in the spu scheduler instead of reimplementing it. Signed-off-by: Christoph Hellwig Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/spufs/sched.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index 814f65e025f1..ba4b01e01ace 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -46,9 +46,8 @@ #define SPU_MIN_TIMESLICE (100 * HZ / 1000) -#define SPU_BITMAP_SIZE (((MAX_PRIO+BITS_PER_LONG)/BITS_PER_LONG)+1) struct spu_prio_array { - unsigned long bitmap[SPU_BITMAP_SIZE]; + DECLARE_BITMAP(bitmap, MAX_PRIO); struct list_head runq[MAX_PRIO]; spinlock_t runq_lock; struct list_head active_list[MAX_NUMNODES]; -- cgit v1.2.3 From 2eb1b12049844a8ebc670e0e4fc908bc3f8933d3 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 13 Feb 2007 21:54:29 +0100 Subject: [POWERPC] spu sched: static timeslicing for SCHED_RR contexts For SCHED_RR tasks we can do some really trivial timeslicing. Basically we fire up a time for every scheduler tick that searches for a higher or same priority thread that is on the runqueue and if there is one context switches to it. Because we can't lock spus from timer context we actually run this from a delayed runqueue instead of a timer. A nice optimization would be to skip the actual priority bitmap search when there are less contexts than physical spus available. To implement this I need a so far unpublished patch from Andre, and it will be added after we have that patch in. Note that right now we only do the time slicing for SCHED_RR tasks. The code would work for SCHED_OTHER tasks aswell, but their prio value is defered from the one the PPU thread has at time of spu_run, and using this for spu scheduling decisions would make the code very unfair. SCHED_OTHER support will be enabled once we the spu scheduler knows how to calculcate cpu_context.prio (very soon) Signed-off-by: Christoph Hellwig Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/spufs/context.c | 2 ++ arch/powerpc/platforms/cell/spufs/run.c | 9 ++++-- arch/powerpc/platforms/cell/spufs/sched.c | 43 ++++++++++++++++++++++++++++- arch/powerpc/platforms/cell/spufs/spufs.h | 5 ++++ 4 files changed, 56 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c index d581f4ec99ba..04ad2e364e97 100644 --- a/arch/powerpc/platforms/cell/spufs/context.c +++ b/arch/powerpc/platforms/cell/spufs/context.c @@ -54,7 +54,9 @@ struct spu_context *alloc_spu_context(struct spu_gang *gang) if (gang) spu_gang_add_ctx(gang, ctx); ctx->rt_priority = current->rt_priority; + ctx->policy = current->policy; ctx->prio = current->prio; + INIT_DELAYED_WORK(&ctx->sched_work, spu_sched_tick); goto out; out_free: kfree(ctx); diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c index a973e79e9fdc..353a8fa07ab8 100644 --- a/arch/powerpc/platforms/cell/spufs/run.c +++ b/arch/powerpc/platforms/cell/spufs/run.c @@ -164,8 +164,10 @@ static inline int spu_run_init(struct spu_context *ctx, u32 * npc) (SPU_RUNCNTL_RUNNABLE | SPU_RUNCNTL_ISOLATE); if (runcntl == 0) runcntl = SPU_RUNCNTL_RUNNABLE; - } else + } else { + spu_start_tick(ctx); ctx->ops->npc_write(ctx, *npc); + } ctx->ops->runcntl_write(ctx, runcntl); return ret; @@ -176,6 +178,7 @@ static inline int spu_run_fini(struct spu_context *ctx, u32 * npc, { int ret = 0; + spu_stop_tick(ctx); *status = ctx->ops->status_read(ctx); *npc = ctx->ops->npc_read(ctx); spu_release(ctx); @@ -329,8 +332,10 @@ long spufs_run_spu(struct file *file, struct spu_context *ctx, } if (unlikely(ctx->state != SPU_STATE_RUNNABLE)) { ret = spu_reacquire_runnable(ctx, npc, &status); - if (ret) + if (ret) { + spu_stop_tick(ctx); goto out2; + } continue; } ret = spu_process_events(ctx); diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index ba4b01e01ace..2f25e68b4bac 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -44,7 +44,7 @@ #include #include "spufs.h" -#define SPU_MIN_TIMESLICE (100 * HZ / 1000) +#define SPU_TIMESLICE (HZ) struct spu_prio_array { DECLARE_BITMAP(bitmap, MAX_PRIO); @@ -55,6 +55,7 @@ struct spu_prio_array { }; static struct spu_prio_array *spu_prio; +static struct workqueue_struct *spu_sched_wq; static inline int node_allowed(int node) { @@ -68,6 +69,40 @@ static inline int node_allowed(int node) return 1; } +void spu_start_tick(struct spu_context *ctx) +{ + if (ctx->policy == SCHED_RR) + queue_delayed_work(spu_sched_wq, &ctx->sched_work, SPU_TIMESLICE); +} + +void spu_stop_tick(struct spu_context *ctx) +{ + if (ctx->policy == SCHED_RR) + cancel_delayed_work(&ctx->sched_work); +} + +void spu_sched_tick(struct work_struct *work) +{ + struct spu_context *ctx = + container_of(work, struct spu_context, sched_work.work); + struct spu *spu; + int rearm = 1; + + mutex_lock(&ctx->state_mutex); + spu = ctx->spu; + if (spu) { + int best = sched_find_first_bit(spu_prio->bitmap); + if (best <= ctx->prio) { + spu_deactivate(ctx); + rearm = 0; + } + } + mutex_unlock(&ctx->state_mutex); + + if (rearm) + spu_start_tick(ctx); +} + /** * spu_add_to_active_list - add spu to active list * @spu: spu to add to the active list @@ -437,10 +472,15 @@ int __init spu_sched_init(void) { int i; + spu_sched_wq = create_singlethread_workqueue("spusched"); + if (!spu_sched_wq) + return 1; + spu_prio = kzalloc(sizeof(struct spu_prio_array), GFP_KERNEL); if (!spu_prio) { printk(KERN_WARNING "%s: Unable to allocate priority queue.\n", __FUNCTION__); + destroy_workqueue(spu_sched_wq); return 1; } for (i = 0; i < MAX_PRIO; i++) { @@ -471,4 +511,5 @@ void __exit spu_sched_exit(void) mutex_unlock(&spu_prio->active_mutex[node]); } kfree(spu_prio); + destroy_workqueue(spu_sched_wq); } diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h index 85b182d16464..0c437891dfd5 100644 --- a/arch/powerpc/platforms/cell/spufs/spufs.h +++ b/arch/powerpc/platforms/cell/spufs/spufs.h @@ -82,8 +82,10 @@ struct spu_context { /* scheduler fields */ struct list_head rq; + struct delayed_work sched_work; unsigned long sched_flags; unsigned long rt_priority; + int policy; int prio; }; @@ -195,6 +197,9 @@ enum { int spu_activate(struct spu_context *ctx, unsigned long flags); void spu_deactivate(struct spu_context *ctx); void spu_yield(struct spu_context *ctx); +void spu_start_tick(struct spu_context *ctx); +void spu_stop_tick(struct spu_context *ctx); +void spu_sched_tick(struct work_struct *work); int __init spu_sched_init(void); void __exit spu_sched_exit(void); -- cgit v1.2.3 From 128b8546a83a9e37448bc126e1045dc1db291165 Mon Sep 17 00:00:00 2001 From: Masato Noguchi Date: Tue, 13 Feb 2007 21:54:30 +0100 Subject: [POWERPC] spufs: avoid accessing kernel memory through mmapped /mem node I found an exploit in current kernel. Currently, there is no range check about mmapping "/mem" node in spufs. Thus, an application can access privilege memory region. In case this kernel already worked on a public server, I send this information only here. If there are such servers in somewhere, please replace it, ASAP. Signed-off-by: Masato Noguchi Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/spufs/file.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c index c729813043a6..b00653d69c01 100644 --- a/arch/powerpc/platforms/cell/spufs/file.c +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -103,6 +103,9 @@ static unsigned long spufs_mem_mmap_nopfn(struct vm_area_struct *vma, offset += vma->vm_pgoff << PAGE_SHIFT; + if (offset >= LS_SIZE) + return NOPFN_SIGBUS; + spu_acquire(ctx); if (ctx->state == SPU_STATE_SAVED) { -- cgit v1.2.3 From bcb63e25ed3c56ee40cca4d18fbaac1d2a40c1d6 Mon Sep 17 00:00:00 2001 From: Carl Love Date: Tue, 13 Feb 2007 22:02:02 +0100 Subject: [POWERPC] cell: PPU Oprofile cleanup patch This is a clean up patch that includes the following changes: -Some comments were added to clarify the code based on feedback from the community. -The write_pm_cntrl() and set_count_mode() were passed a structure element from a global variable. The argument was removed so the functions now just operate on the global directly. -The set_pm_event() function call in the cell_virtual_cntr() routine was moved to a for-loop before the for_each_cpu loop Signed-off-by: Carl Love Signed-off-by: Maynard Johnson Signed-off-by: Arnd Bergmann --- arch/powerpc/oprofile/op_model_cell.c | 104 ++++++++++++++++++++-------------- arch/powerpc/platforms/cell/pmu.c | 14 ++--- 2 files changed, 67 insertions(+), 51 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c index 2eb15f388103..8d4a9586464d 100644 --- a/arch/powerpc/oprofile/op_model_cell.c +++ b/arch/powerpc/oprofile/op_model_cell.c @@ -41,8 +41,12 @@ #define PPU_CYCLES_EVENT_NUM 1 /* event number for CYCLES */ #define CBE_COUNT_ALL_CYCLES 0x42800000 /* PPU cycle event specifier */ -#define NUM_THREADS 2 -#define VIRT_CNTR_SW_TIME_NS 100000000 // 0.5 seconds +#define NUM_THREADS 2 /* number of physical threads in + * physical processor + */ +#define NUM_TRACE_BUS_WORDS 4 +#define NUM_INPUT_BUS_WORDS 2 + struct pmc_cntrl_data { unsigned long vcntr; @@ -93,7 +97,6 @@ static struct { u32 pm07_cntrl[NR_PHYS_CTRS]; } pm_regs; - #define GET_SUB_UNIT(x) ((x & 0x0000f000) >> 12) #define GET_BUS_WORD(x) ((x & 0x000000f0) >> 4) #define GET_BUS_TYPE(x) ((x & 0x00000300) >> 8) @@ -101,7 +104,6 @@ static struct { #define GET_COUNT_CYCLES(x) (x & 0x00000001) #define GET_INPUT_CONTROL(x) ((x & 0x00000004) >> 2) - static DEFINE_PER_CPU(unsigned long[NR_PHYS_CTRS], pmc_values); static struct pmc_cntrl_data pmc_cntrl[NUM_THREADS][NR_PHYS_CTRS]; @@ -129,8 +131,8 @@ static spinlock_t virt_cntr_lock = SPIN_LOCK_UNLOCKED; static u32 ctr_enabled; -static unsigned char trace_bus[4]; -static unsigned char input_bus[2]; +static unsigned char trace_bus[NUM_TRACE_BUS_WORDS]; +static unsigned char input_bus[NUM_INPUT_BUS_WORDS]; /* * Firmware interface functions @@ -183,7 +185,8 @@ static void pm_rtas_activate_signals(u32 node, u32 count) for (j = 0; j < count; j++) { /* fw expects physical cpu # */ pm_signal_local[j].cpu = node; - pm_signal_local[j].signal_group = pm_signal[j].signal_group; + pm_signal_local[j].signal_group + = pm_signal[j].signal_group; pm_signal_local[j].bus_word = pm_signal[j].bus_word; pm_signal_local[j].sub_unit = pm_signal[j].sub_unit; pm_signal_local[j].bit = pm_signal[j].bit; @@ -232,13 +235,21 @@ static void set_pm_event(u32 ctr, int event, u32 unit_mask) p->signal_group = event / 100; p->bus_word = bus_word; - p->sub_unit = unit_mask & 0x0000f000; + p->sub_unit = (unit_mask & 0x0000f000) >> 12; pm_regs.pm07_cntrl[ctr] = 0; pm_regs.pm07_cntrl[ctr] |= PM07_CTR_COUNT_CYCLES(count_cycles); pm_regs.pm07_cntrl[ctr] |= PM07_CTR_POLARITY(polarity); pm_regs.pm07_cntrl[ctr] |= PM07_CTR_INPUT_CONTROL(input_control); + /* Some of the islands signal selection is based on 64 bit words. + * The debug bus words are 32 bits, the input words to the performance + * counters are defined as 32 bits. Need to convert the 64 bit island + * specification to the appropriate 32 input bit and bus word for the + * performance counter event selection. See the CELL Performance + * monitoring signals manual and the Perf cntr hardware descriptions + * for the details. + */ if (input_control == 0) { if (signal_bit > 31) { signal_bit -= 32; @@ -259,12 +270,12 @@ static void set_pm_event(u32 ctr, int event, u32 unit_mask) p->bit = signal_bit; } - for (i = 0; i < 4; i++) { + for (i = 0; i < NUM_TRACE_BUS_WORDS; i++) { if (bus_word & (1 << i)) { pm_regs.debug_bus_control |= (bus_type << (31 - (2 * i) + 1)); - for (j = 0; j < 2; j++) { + for (j = 0; j < NUM_INPUT_BUS_WORDS; j++) { if (input_bus[j] == 0xff) { input_bus[j] = i; pm_regs.group_control |= @@ -278,52 +289,58 @@ out: ; } -static void write_pm_cntrl(int cpu, struct pm_cntrl *pm_cntrl) +static void write_pm_cntrl(int cpu) { - /* Oprofile will use 32 bit counters, set bits 7:10 to 0 */ + /* Oprofile will use 32 bit counters, set bits 7:10 to 0 + * pmregs.pm_cntrl is a global + */ + u32 val = 0; - if (pm_cntrl->enable == 1) + if (pm_regs.pm_cntrl.enable == 1) val |= CBE_PM_ENABLE_PERF_MON; - if (pm_cntrl->stop_at_max == 1) + if (pm_regs.pm_cntrl.stop_at_max == 1) val |= CBE_PM_STOP_AT_MAX; - if (pm_cntrl->trace_mode == 1) - val |= CBE_PM_TRACE_MODE_SET(pm_cntrl->trace_mode); + if (pm_regs.pm_cntrl.trace_mode == 1) + val |= CBE_PM_TRACE_MODE_SET(pm_regs.pm_cntrl.trace_mode); - if (pm_cntrl->freeze == 1) + if (pm_regs.pm_cntrl.freeze == 1) val |= CBE_PM_FREEZE_ALL_CTRS; /* Routine set_count_mode must be called previously to set * the count mode based on the user selection of user and kernel. */ - val |= CBE_PM_COUNT_MODE_SET(pm_cntrl->count_mode); + val |= CBE_PM_COUNT_MODE_SET(pm_regs.pm_cntrl.count_mode); cbe_write_pm(cpu, pm_control, val); } static inline void -set_count_mode(u32 kernel, u32 user, struct pm_cntrl *pm_cntrl) +set_count_mode(u32 kernel, u32 user) { /* The user must specify user and kernel if they want them. If - * neither is specified, OProfile will count in hypervisor mode + * neither is specified, OProfile will count in hypervisor mode. + * pm_regs.pm_cntrl is a global */ if (kernel) { if (user) - pm_cntrl->count_mode = CBE_COUNT_ALL_MODES; + pm_regs.pm_cntrl.count_mode = CBE_COUNT_ALL_MODES; else - pm_cntrl->count_mode = CBE_COUNT_SUPERVISOR_MODE; + pm_regs.pm_cntrl.count_mode = + CBE_COUNT_SUPERVISOR_MODE; } else { if (user) - pm_cntrl->count_mode = CBE_COUNT_PROBLEM_MODE; + pm_regs.pm_cntrl.count_mode = CBE_COUNT_PROBLEM_MODE; else - pm_cntrl->count_mode = CBE_COUNT_HYPERVISOR_MODE; + pm_regs.pm_cntrl.count_mode = + CBE_COUNT_HYPERVISOR_MODE; } } static inline void enable_ctr(u32 cpu, u32 ctr, u32 * pm07_cntrl) { - pm07_cntrl[ctr] |= PM07_CTR_ENABLE(1); + pm07_cntrl[ctr] |= CBE_PM_CTR_ENABLE; cbe_write_pm07_control(cpu, ctr, pm07_cntrl[ctr]); } @@ -365,6 +382,14 @@ static void cell_virtual_cntr(unsigned long data) hdw_thread = 1 ^ hdw_thread; next_hdw_thread = hdw_thread; + for (i = 0; i < num_counters; i++) + /* There are some per thread events. Must do the + * set event, for the thread that is being started + */ + set_pm_event(i, + pmc_cntrl[next_hdw_thread][i].evnts, + pmc_cntrl[next_hdw_thread][i].masks); + /* The following is done only once per each node, but * we need cpu #, not node #, to pass to the cbe_xxx functions. */ @@ -385,12 +410,13 @@ static void cell_virtual_cntr(unsigned long data) == 0xFFFFFFFF) /* If the cntr value is 0xffffffff, we must * reset that to 0xfffffff0 when the current - * thread is restarted. This will generate a new - * interrupt and make sure that we never restore - * the counters to the max value. If the counters - * were restored to the max value, they do not - * increment and no interrupts are generated. Hence - * no more samples will be collected on that cpu. + * thread is restarted. This will generate a + * new interrupt and make sure that we never + * restore the counters to the max value. If + * the counters were restored to the max value, + * they do not increment and no interrupts are + * generated. Hence no more samples will be + * collected on that cpu. */ cbe_write_ctr(cpu, i, 0xFFFFFFF0); else @@ -410,9 +436,6 @@ static void cell_virtual_cntr(unsigned long data) * Must do the set event, enable_cntr * for each cpu. */ - set_pm_event(i, - pmc_cntrl[next_hdw_thread][i].evnts, - pmc_cntrl[next_hdw_thread][i].masks); enable_ctr(cpu, i, pm_regs.pm07_cntrl); } else { @@ -465,8 +488,7 @@ cell_reg_setup(struct op_counter_config *ctr, pm_regs.pm_cntrl.trace_mode = 0; pm_regs.pm_cntrl.freeze = 1; - set_count_mode(sys->enable_kernel, sys->enable_user, - &pm_regs.pm_cntrl); + set_count_mode(sys->enable_kernel, sys->enable_user); /* Setup the thread 0 events */ for (i = 0; i < num_ctrs; ++i) { @@ -498,10 +520,10 @@ cell_reg_setup(struct op_counter_config *ctr, pmc_cntrl[1][i].vcntr = i; } - for (i = 0; i < 4; i++) + for (i = 0; i < NUM_TRACE_BUS_WORDS; i++) trace_bus[i] = 0xff; - for (i = 0; i < 2; i++) + for (i = 0; i < NUM_INPUT_BUS_WORDS; i++) input_bus[i] = 0xff; /* Our counters count up, and "count" refers to @@ -560,7 +582,7 @@ static void cell_cpu_setup(struct op_counter_config *cntr) cbe_write_pm(cpu, pm_start_stop, 0); cbe_write_pm(cpu, group_control, pm_regs.group_control); cbe_write_pm(cpu, debug_bus_control, pm_regs.debug_bus_control); - write_pm_cntrl(cpu, &pm_regs.pm_cntrl); + write_pm_cntrl(cpu); for (i = 0; i < num_counters; ++i) { if (ctr_enabled & (1 << i)) { @@ -602,7 +624,7 @@ static void cell_global_start(struct op_counter_config *ctr) } } - cbe_clear_pm_interrupts(cpu); + cbe_get_and_clear_pm_interrupts(cpu); cbe_enable_pm_interrupts(cpu, hdw_thread, interrupt_mask); cbe_enable_pm(cpu); } @@ -672,7 +694,7 @@ cell_handle_interrupt(struct pt_regs *regs, struct op_counter_config *ctr) cbe_disable_pm(cpu); - interrupt_mask = cbe_clear_pm_interrupts(cpu); + interrupt_mask = cbe_get_and_clear_pm_interrupts(cpu); /* If the interrupt mask has been cleared, then the virt cntr * has cleared the interrupt. When the thread that generated diff --git a/arch/powerpc/platforms/cell/pmu.c b/arch/powerpc/platforms/cell/pmu.c index d04ae1671e6c..66ca4b5a1dbc 100644 --- a/arch/powerpc/platforms/cell/pmu.c +++ b/arch/powerpc/platforms/cell/pmu.c @@ -345,18 +345,12 @@ EXPORT_SYMBOL_GPL(cbe_read_trace_buffer); * Enabling/disabling interrupts for the entire performance monitoring unit. */ -u32 cbe_query_pm_interrupts(u32 cpu) -{ - return cbe_read_pm(cpu, pm_status); -} -EXPORT_SYMBOL_GPL(cbe_query_pm_interrupts); - -u32 cbe_clear_pm_interrupts(u32 cpu) +u32 cbe_get_and_clear_pm_interrupts(u32 cpu) { /* Reading pm_status clears the interrupt bits. */ - return cbe_query_pm_interrupts(cpu); + return cbe_read_pm(cpu, pm_status); } -EXPORT_SYMBOL_GPL(cbe_clear_pm_interrupts); +EXPORT_SYMBOL_GPL(cbe_get_and_clear_pm_interrupts); void cbe_enable_pm_interrupts(u32 cpu, u32 thread, u32 mask) { @@ -371,7 +365,7 @@ EXPORT_SYMBOL_GPL(cbe_enable_pm_interrupts); void cbe_disable_pm_interrupts(u32 cpu) { - cbe_clear_pm_interrupts(cpu); + cbe_get_and_clear_pm_interrupts(cpu); cbe_write_pm(cpu, pm_status, 0); } EXPORT_SYMBOL_GPL(cbe_disable_pm_interrupts); -- cgit v1.2.3 From c7eb734766217b9ddac217cbccae3aedcfa67520 Mon Sep 17 00:00:00 2001 From: Maynard Johnson Date: Tue, 13 Feb 2007 22:02:03 +0100 Subject: [POWERPC] cell: pm_rtas_activat_signals routine cleanup The code was setting up the debug bus for group 21 when profiling on the event PPU CYCLES. The debug bus is not actually used by the hardware performance counters when counting PPU CYCLES. Setting up the debug bus for PPU CYCLES causes signal routing conflicts on the debug bus when profiling PPU cycles and another PPU event. This patch fixes the code to only setup the debug bus to route the performance signals for the non PPU CYCLE events. Signed-off-by: Maynard Johnson Signed-off-by: Carl Love Signed-off-by: Arnd Bergmann --- arch/powerpc/oprofile/op_model_cell.c | 49 +++++++++++++++++++++++------------ 1 file changed, 33 insertions(+), 16 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c index 8d4a9586464d..e08e1d7b3dc5 100644 --- a/arch/powerpc/oprofile/op_model_cell.c +++ b/arch/powerpc/oprofile/op_model_cell.c @@ -39,6 +39,9 @@ #include "../platforms/cell/interrupt.h" #define PPU_CYCLES_EVENT_NUM 1 /* event number for CYCLES */ +#define PPU_CYCLES_GRP_NUM 1 /* special group number for identifying + * PPU_CYCLES event + */ #define CBE_COUNT_ALL_CYCLES 0x42800000 /* PPU cycle event specifier */ #define NUM_THREADS 2 /* number of physical threads in @@ -62,7 +65,7 @@ struct pmc_cntrl_data { struct pm_signal { u16 cpu; /* Processor to modify */ u16 sub_unit; /* hw subunit this applies to (if applicable) */ - u16 signal_group; /* Signal Group to Enable/Disable */ + short int signal_group; /* Signal Group to Enable/Disable */ u8 bus_word; /* Enable/Disable on this Trace/Trigger/Event * Bus Word(s) (bitmask) */ @@ -179,26 +182,40 @@ static void pm_rtas_reset_signals(u32 node) static void pm_rtas_activate_signals(u32 node, u32 count) { int ret; - int j; + int i, j; struct pm_signal pm_signal_local[NR_PHYS_CTRS]; + /* There is no debug setup required for the cycles event. + * Note that only events in the same group can be used. + * Otherwise, there will be conflicts in correctly routing + * the signals on the debug bus. It is the responsiblity + * of the OProfile user tool to check the events are in + * the same group. + */ + i = 0; for (j = 0; j < count; j++) { - /* fw expects physical cpu # */ - pm_signal_local[j].cpu = node; - pm_signal_local[j].signal_group - = pm_signal[j].signal_group; - pm_signal_local[j].bus_word = pm_signal[j].bus_word; - pm_signal_local[j].sub_unit = pm_signal[j].sub_unit; - pm_signal_local[j].bit = pm_signal[j].bit; + if (pm_signal[j].signal_group != PPU_CYCLES_GRP_NUM) { + + /* fw expects physical cpu # */ + pm_signal_local[i].cpu = node; + pm_signal_local[i].signal_group + = pm_signal[j].signal_group; + pm_signal_local[i].bus_word = pm_signal[j].bus_word; + pm_signal_local[i].sub_unit = pm_signal[j].sub_unit; + pm_signal_local[i].bit = pm_signal[j].bit; + i++; + } } - ret = rtas_ibm_cbe_perftools(SUBFUNC_ACTIVATE, PASSTHRU_ENABLE, - pm_signal_local, - count * sizeof(struct pm_signal)); + if (i != 0) { + ret = rtas_ibm_cbe_perftools(SUBFUNC_ACTIVATE, PASSTHRU_ENABLE, + pm_signal_local, + i * sizeof(struct pm_signal)); - if (ret) - printk(KERN_WARNING "%s: rtas returned: %d\n", - __FUNCTION__, ret); + if (ret) + printk(KERN_WARNING "%s: rtas returned: %d\n", + __FUNCTION__, ret); + } } /* @@ -215,7 +232,7 @@ static void set_pm_event(u32 ctr, int event, u32 unit_mask) /* Special Event: Count all cpu cycles */ pm_regs.pm07_cntrl[ctr] = CBE_COUNT_ALL_CYCLES; p = &(pm_signal[ctr]); - p->signal_group = 21; + p->signal_group = PPU_CYCLES_GRP_NUM; p->bus_word = 1; p->sub_unit = 0; p->bit = 0; -- cgit v1.2.3 From 02ed82ccc5171bc3c88666568edcb71f3d4a79f6 Mon Sep 17 00:00:00 2001 From: Becky Bruce Date: Tue, 13 Feb 2007 16:00:49 -0600 Subject: [POWERPC] 85xx: Drop use of SYNC macro in head_fsl_booke.S Eliminate needless invocation of the SYNC macro (which always evaluates to nothing on BookE) from head_fsl_booke.S (for both arch/ppc & arch/powerpc). Signed-off-by: Becky Bruce Signed-off-by: Kumar Gala --- arch/powerpc/kernel/head_fsl_booke.S | 2 -- arch/ppc/kernel/head_fsl_booke.S | 2 -- 2 files changed, 4 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S index 54f40d95cdb9..1f155d399d57 100644 --- a/arch/powerpc/kernel/head_fsl_booke.S +++ b/arch/powerpc/kernel/head_fsl_booke.S @@ -892,7 +892,6 @@ load_up_spe: REST_GPR(9, r11) REST_GPR(12, r11) lwz r11,GPR11(r11) - SYNC rfi /* @@ -956,7 +955,6 @@ _GLOBAL(giveup_altivec) _GLOBAL(giveup_spe) mfmsr r5 oris r5,r5,MSR_SPE@h - SYNC mtmsr r5 /* enable use of SPE now */ isync cmpi 0,r3,0 diff --git a/arch/ppc/kernel/head_fsl_booke.S b/arch/ppc/kernel/head_fsl_booke.S index 54f40d95cdb9..1f155d399d57 100644 --- a/arch/ppc/kernel/head_fsl_booke.S +++ b/arch/ppc/kernel/head_fsl_booke.S @@ -892,7 +892,6 @@ load_up_spe: REST_GPR(9, r11) REST_GPR(12, r11) lwz r11,GPR11(r11) - SYNC rfi /* @@ -956,7 +955,6 @@ _GLOBAL(giveup_altivec) _GLOBAL(giveup_spe) mfmsr r5 oris r5,r5,MSR_SPE@h - SYNC mtmsr r5 /* enable use of SPE now */ isync cmpi 0,r3,0 -- cgit v1.2.3 From 9a88cbb5227970757881b1a65be01dea61fe2584 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 16 Nov 2006 02:56:12 +0000 Subject: [MIPS] Unify dma-{coherent,noncoherent.ip27,ip32} Platforms will now have to supply a function dma_device_is_coherent which returns if a particular device participates in the coherence domain. For most platforms this function will always return 0 or 1. Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 5 - arch/mips/mm/Makefile | 14 +- arch/mips/mm/dma-coherent.c | 254 --------------------------- arch/mips/mm/dma-default.c | 363 ++++++++++++++++++++++++++++++++++++++ arch/mips/mm/dma-ip27.c | 257 --------------------------- arch/mips/mm/dma-ip32.c | 383 ----------------------------------------- arch/mips/mm/dma-noncoherent.c | 370 --------------------------------------- arch/mips/pci/Makefile | 2 +- arch/mips/pci/pci-dac.c | 79 +++++++++ 9 files changed, 445 insertions(+), 1282 deletions(-) delete mode 100644 arch/mips/mm/dma-coherent.c create mode 100644 arch/mips/mm/dma-default.c delete mode 100644 arch/mips/mm/dma-ip27.c delete mode 100644 arch/mips/mm/dma-ip32.c delete mode 100644 arch/mips/mm/dma-noncoherent.c create mode 100644 arch/mips/pci/pci-dac.c (limited to 'arch') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 5fe195a41a80..a92ce6bd7cf1 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -598,8 +598,6 @@ config SGI_IP32 select ARC select ARC32 select BOOT_ELF32 - select OWN_DMA - select DMA_IP32 select DMA_NONCOHERENT select HW_HAS_PCI select R5000_CPU_SCACHE @@ -883,9 +881,6 @@ config DMA_NONCOHERENT config DMA_NEED_PCI_MAP_STATE bool -config OWN_DMA - bool - config EARLY_PRINTK bool diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile index 19e41fd186c4..de5727385bc6 100644 --- a/arch/mips/mm/Makefile +++ b/arch/mips/mm/Makefile @@ -2,8 +2,8 @@ # Makefile for the Linux/MIPS-specific parts of the memory manager. # -obj-y += cache.o extable.o fault.o init.o pgtable.o \ - tlbex.o tlbex-fault.o +obj-y += cache.o dma-default.o extable.o fault.o \ + init.o pgtable.o tlbex.o tlbex-fault.o obj-$(CONFIG_32BIT) += ioremap.o pgtable-32.o obj-$(CONFIG_64BIT) += pgtable-64.o @@ -32,14 +32,4 @@ obj-$(CONFIG_R5000_CPU_SCACHE) += sc-r5k.o obj-$(CONFIG_RM7000_CPU_SCACHE) += sc-rm7k.o obj-$(CONFIG_MIPS_CPU_SCACHE) += sc-mips.o -# -# Choose one DMA coherency model -# -ifndef CONFIG_OWN_DMA -obj-$(CONFIG_DMA_COHERENT) += dma-coherent.o -obj-$(CONFIG_DMA_NONCOHERENT) += dma-noncoherent.o -endif -obj-$(CONFIG_DMA_IP27) += dma-ip27.o -obj-$(CONFIG_DMA_IP32) += dma-ip32.o - EXTRA_AFLAGS := $(CFLAGS) diff --git a/arch/mips/mm/dma-coherent.c b/arch/mips/mm/dma-coherent.c deleted file mode 100644 index 5697c6e250a3..000000000000 --- a/arch/mips/mm/dma-coherent.c +++ /dev/null @@ -1,254 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2000 Ani Joshi - * Copyright (C) 2000, 2001 Ralf Baechle - * swiped from i386, and cloned for MIPS by Geert, polished by Ralf. - */ -#include -#include -#include -#include -#include - -#include -#include - -void *dma_alloc_noncoherent(struct device *dev, size_t size, - dma_addr_t * dma_handle, gfp_t gfp) -{ - void *ret; - /* ignore region specifiers */ - gfp &= ~(__GFP_DMA | __GFP_HIGHMEM); - - if (dev == NULL || (dev->coherent_dma_mask < 0xffffffff)) - gfp |= GFP_DMA; - ret = (void *) __get_free_pages(gfp, get_order(size)); - - if (ret != NULL) { - memset(ret, 0, size); - *dma_handle = virt_to_phys(ret); - } - - return ret; -} - -EXPORT_SYMBOL(dma_alloc_noncoherent); - -void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t * dma_handle, gfp_t gfp) - __attribute__((alias("dma_alloc_noncoherent"))); - -EXPORT_SYMBOL(dma_alloc_coherent); - -void dma_free_noncoherent(struct device *dev, size_t size, void *vaddr, - dma_addr_t dma_handle) -{ - unsigned long addr = (unsigned long) vaddr; - - free_pages(addr, get_order(size)); -} - -EXPORT_SYMBOL(dma_free_noncoherent); - -void dma_free_coherent(struct device *dev, size_t size, void *vaddr, - dma_addr_t dma_handle) __attribute__((alias("dma_free_noncoherent"))); - -EXPORT_SYMBOL(dma_free_coherent); - -dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); - - return __pa(ptr); -} - -EXPORT_SYMBOL(dma_map_single); - -void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_unmap_single); - -int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, - enum dma_data_direction direction) -{ - int i; - - BUG_ON(direction == DMA_NONE); - - for (i = 0; i < nents; i++, sg++) { - sg->dma_address = (dma_addr_t)page_to_phys(sg->page) + sg->offset; - } - - return nents; -} - -EXPORT_SYMBOL(dma_map_sg); - -dma_addr_t dma_map_page(struct device *dev, struct page *page, - unsigned long offset, size_t size, enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); - - return page_to_phys(page) + offset; -} - -EXPORT_SYMBOL(dma_map_page); - -void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_unmap_page); - -void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_unmap_sg); - -void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, - size_t size, enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_sync_single_for_cpu); - -void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, - size_t size, enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_sync_single_for_device); - -void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle, - unsigned long offset, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_sync_single_range_for_cpu); - -void dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle, - unsigned long offset, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_sync_single_range_for_device); - -void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_sync_sg_for_cpu); - -void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_sync_sg_for_device); - -int dma_mapping_error(dma_addr_t dma_addr) -{ - return 0; -} - -EXPORT_SYMBOL(dma_mapping_error); - -int dma_supported(struct device *dev, u64 mask) -{ - /* - * we fall back to GFP_DMA when the mask isn't all 1s, - * so we can't guarantee allocations that must be - * within a tighter range than GFP_DMA.. - */ - if (mask < 0x00ffffff) - return 0; - - return 1; -} - -EXPORT_SYMBOL(dma_supported); - -int dma_is_consistent(struct device *dev, dma_addr_t dma_addr) -{ - return 1; -} - -EXPORT_SYMBOL(dma_is_consistent); - -void dma_cache_sync(struct device *dev, void *vaddr, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_cache_sync); - -/* The DAC routines are a PCIism.. */ - -#ifdef CONFIG_PCI - -#include - -dma64_addr_t pci_dac_page_to_dma(struct pci_dev *pdev, - struct page *page, unsigned long offset, int direction) -{ - return (dma64_addr_t)page_to_phys(page) + offset; -} - -EXPORT_SYMBOL(pci_dac_page_to_dma); - -struct page *pci_dac_dma_to_page(struct pci_dev *pdev, - dma64_addr_t dma_addr) -{ - return mem_map + (dma_addr >> PAGE_SHIFT); -} - -EXPORT_SYMBOL(pci_dac_dma_to_page); - -unsigned long pci_dac_dma_to_offset(struct pci_dev *pdev, - dma64_addr_t dma_addr) -{ - return dma_addr & ~PAGE_MASK; -} - -EXPORT_SYMBOL(pci_dac_dma_to_offset); - -void pci_dac_dma_sync_single_for_cpu(struct pci_dev *pdev, - dma64_addr_t dma_addr, size_t len, int direction) -{ - BUG_ON(direction == PCI_DMA_NONE); -} - -EXPORT_SYMBOL(pci_dac_dma_sync_single_for_cpu); - -void pci_dac_dma_sync_single_for_device(struct pci_dev *pdev, - dma64_addr_t dma_addr, size_t len, int direction) -{ - BUG_ON(direction == PCI_DMA_NONE); -} - -EXPORT_SYMBOL(pci_dac_dma_sync_single_for_device); - -#endif /* CONFIG_PCI */ diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c new file mode 100644 index 000000000000..4a32e939698f --- /dev/null +++ b/arch/mips/mm/dma-default.c @@ -0,0 +1,363 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2000 Ani Joshi + * Copyright (C) 2000, 2001, 06 Ralf Baechle + * swiped from i386, and cloned for MIPS by Geert, polished by Ralf. + */ + +#include +#include +#include +#include +#include + +#include +#include + +#include + +/* + * Warning on the terminology - Linux calls an uncached area coherent; + * MIPS terminology calls memory areas with hardware maintained coherency + * coherent. + */ + +static inline int cpu_is_noncoherent_r10000(struct device *dev) +{ + return !plat_device_is_coherent(dev) && + (current_cpu_data.cputype == CPU_R10000 && + current_cpu_data.cputype == CPU_R12000); +} + +void *dma_alloc_noncoherent(struct device *dev, size_t size, + dma_addr_t * dma_handle, gfp_t gfp) +{ + void *ret; + + /* ignore region specifiers */ + gfp &= ~(__GFP_DMA | __GFP_HIGHMEM); + + if (dev == NULL || (dev->coherent_dma_mask < 0xffffffff)) + gfp |= GFP_DMA; + ret = (void *) __get_free_pages(gfp, get_order(size)); + + if (ret != NULL) { + memset(ret, 0, size); + *dma_handle = plat_map_dma_mem(dev, ret, size); + } + + return ret; +} + +EXPORT_SYMBOL(dma_alloc_noncoherent); + +void *dma_alloc_coherent(struct device *dev, size_t size, + dma_addr_t * dma_handle, gfp_t gfp) +{ + void *ret; + + /* ignore region specifiers */ + gfp &= ~(__GFP_DMA | __GFP_HIGHMEM); + + if (dev == NULL || (dev->coherent_dma_mask < 0xffffffff)) + gfp |= GFP_DMA; + ret = (void *) __get_free_pages(gfp, get_order(size)); + + if (ret) { + memset(ret, 0, size); + *dma_handle = plat_map_dma_mem(dev, ret, size); + + if (!plat_device_is_coherent(dev)) { + dma_cache_wback_inv((unsigned long) ret, size); + ret = UNCAC_ADDR(ret); + } + } + + return ret; +} + +EXPORT_SYMBOL(dma_alloc_coherent); + +void dma_free_noncoherent(struct device *dev, size_t size, void *vaddr, + dma_addr_t dma_handle) +{ + free_pages((unsigned long) vaddr, get_order(size)); +} + +EXPORT_SYMBOL(dma_free_noncoherent); + +void dma_free_coherent(struct device *dev, size_t size, void *vaddr, + dma_addr_t dma_handle) +{ + unsigned long addr = (unsigned long) vaddr; + + if (!plat_device_is_coherent(dev)) + addr = CAC_ADDR(addr); + + free_pages(addr, get_order(size)); +} + +EXPORT_SYMBOL(dma_free_coherent); + +static inline void __dma_sync(unsigned long addr, size_t size, + enum dma_data_direction direction) +{ + switch (direction) { + case DMA_TO_DEVICE: + dma_cache_wback(addr, size); + break; + + case DMA_FROM_DEVICE: + dma_cache_inv(addr, size); + break; + + case DMA_BIDIRECTIONAL: + dma_cache_wback_inv(addr, size); + break; + + default: + BUG(); + } +} + +dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size, + enum dma_data_direction direction) +{ + unsigned long addr = (unsigned long) ptr; + + if (!plat_device_is_coherent(dev)) + __dma_sync(addr, size, direction); + + return plat_map_dma_mem(dev, ptr, size); +} + +EXPORT_SYMBOL(dma_map_single); + +void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, + enum dma_data_direction direction) +{ + if (cpu_is_noncoherent_r10000(dev)) + __dma_sync(plat_dma_addr_to_phys(dma_addr) + PAGE_OFFSET, size, + direction); + + plat_unmap_dma_mem(dma_addr); +} + +EXPORT_SYMBOL(dma_unmap_single); + +int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, + enum dma_data_direction direction) +{ + int i; + + BUG_ON(direction == DMA_NONE); + + for (i = 0; i < nents; i++, sg++) { + unsigned long addr; + + addr = (unsigned long) page_address(sg->page); + if (!plat_device_is_coherent(dev) && addr) + __dma_sync(addr + sg->offset, sg->length, direction); + sg->dma_address = plat_map_dma_mem_page(dev, sg->page) + + sg->offset; + } + + return nents; +} + +EXPORT_SYMBOL(dma_map_sg); + +dma_addr_t dma_map_page(struct device *dev, struct page *page, + unsigned long offset, size_t size, enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); + + if (!plat_device_is_coherent(dev)) { + unsigned long addr; + + addr = (unsigned long) page_address(page) + offset; + dma_cache_wback_inv(addr, size); + } + + return plat_map_dma_mem_page(dev, page) + offset; +} + +EXPORT_SYMBOL(dma_map_page); + +void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size, + enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); + + if (!plat_device_is_coherent(dev) && direction != DMA_TO_DEVICE) { + unsigned long addr; + + addr = plat_dma_addr_to_phys(dma_address); + dma_cache_wback_inv(addr, size); + } + + plat_unmap_dma_mem(dma_address); +} + +EXPORT_SYMBOL(dma_unmap_page); + +void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries, + enum dma_data_direction direction) +{ + unsigned long addr; + int i; + + BUG_ON(direction == DMA_NONE); + + for (i = 0; i < nhwentries; i++, sg++) { + if (!plat_device_is_coherent(dev) && + direction != DMA_TO_DEVICE) { + addr = (unsigned long) page_address(sg->page); + if (addr) + __dma_sync(addr + sg->offset, sg->length, + direction); + } + plat_unmap_dma_mem(sg->dma_address); + } +} + +EXPORT_SYMBOL(dma_unmap_sg); + +void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, + size_t size, enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); + + if (cpu_is_noncoherent_r10000(dev)) { + unsigned long addr; + + addr = PAGE_OFFSET + plat_dma_addr_to_phys(dma_handle); + __dma_sync(addr, size, direction); + } +} + +EXPORT_SYMBOL(dma_sync_single_for_cpu); + +void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, + size_t size, enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); + + if (cpu_is_noncoherent_r10000(dev)) { + unsigned long addr; + + addr = plat_dma_addr_to_phys(dma_handle); + __dma_sync(addr, size, direction); + } +} + +EXPORT_SYMBOL(dma_sync_single_for_device); + +void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle, + unsigned long offset, size_t size, enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); + + if (cpu_is_noncoherent_r10000(dev)) { + unsigned long addr; + + addr = PAGE_OFFSET + plat_dma_addr_to_phys(dma_handle); + __dma_sync(addr + offset, size, direction); + } +} + +EXPORT_SYMBOL(dma_sync_single_range_for_cpu); + +void dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle, + unsigned long offset, size_t size, enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); + + if (cpu_is_noncoherent_r10000(dev)) { + unsigned long addr; + + addr = PAGE_OFFSET + plat_dma_addr_to_phys(dma_handle); + __dma_sync(addr + offset, size, direction); + } +} + +EXPORT_SYMBOL(dma_sync_single_range_for_device); + +void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems, + enum dma_data_direction direction) +{ + int i; + + BUG_ON(direction == DMA_NONE); + + /* Make sure that gcc doesn't leave the empty loop body. */ + for (i = 0; i < nelems; i++, sg++) { + if (!plat_device_is_coherent(dev)) + __dma_sync((unsigned long)page_address(sg->page), + sg->length, direction); + plat_unmap_dma_mem(sg->dma_address); + } +} + +EXPORT_SYMBOL(dma_sync_sg_for_cpu); + +void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems, + enum dma_data_direction direction) +{ + int i; + + BUG_ON(direction == DMA_NONE); + + /* Make sure that gcc doesn't leave the empty loop body. */ + for (i = 0; i < nelems; i++, sg++) { + if (!plat_device_is_coherent(dev)) + __dma_sync((unsigned long)page_address(sg->page), + sg->length, direction); + plat_unmap_dma_mem(sg->dma_address); + } +} + +EXPORT_SYMBOL(dma_sync_sg_for_device); + +int dma_mapping_error(dma_addr_t dma_addr) +{ + return 0; +} + +EXPORT_SYMBOL(dma_mapping_error); + +int dma_supported(struct device *dev, u64 mask) +{ + /* + * we fall back to GFP_DMA when the mask isn't all 1s, + * so we can't guarantee allocations that must be + * within a tighter range than GFP_DMA.. + */ + if (mask < 0x00ffffff) + return 0; + + return 1; +} + +EXPORT_SYMBOL(dma_supported); + +int dma_is_consistent(struct device *dev, dma_addr_t dma_addr) +{ + return plat_device_is_coherent(dev); +} + +EXPORT_SYMBOL(dma_is_consistent); + +void dma_cache_sync(struct device *dev, void *vaddr, size_t size, + enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); + + if (!plat_device_is_coherent(dev)) + dma_cache_wback_inv((unsigned long)vaddr, size); +} + +EXPORT_SYMBOL(dma_cache_sync); diff --git a/arch/mips/mm/dma-ip27.c b/arch/mips/mm/dma-ip27.c deleted file mode 100644 index f088344db465..000000000000 --- a/arch/mips/mm/dma-ip27.c +++ /dev/null @@ -1,257 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2000 Ani Joshi - * Copyright (C) 2000, 2001 Ralf Baechle - * swiped from i386, and cloned for MIPS by Geert, polished by Ralf. - */ -#include -#include -#include -#include -#include - -#include -#include - -#define pdev_to_baddr(pdev, addr) \ - (BRIDGE_CONTROLLER(pdev->bus)->baddr + (addr)) -#define dev_to_baddr(dev, addr) \ - pdev_to_baddr(to_pci_dev(dev), (addr)) - -void *dma_alloc_noncoherent(struct device *dev, size_t size, - dma_addr_t * dma_handle, gfp_t gfp) -{ - void *ret; - - /* ignore region specifiers */ - gfp &= ~(__GFP_DMA | __GFP_HIGHMEM); - - if (dev == NULL || (dev->coherent_dma_mask < 0xffffffff)) - gfp |= GFP_DMA; - ret = (void *) __get_free_pages(gfp, get_order(size)); - - if (ret != NULL) { - memset(ret, 0, size); - *dma_handle = dev_to_baddr(dev, virt_to_phys(ret)); - } - - return ret; -} - -EXPORT_SYMBOL(dma_alloc_noncoherent); - -void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t * dma_handle, gfp_t gfp) - __attribute__((alias("dma_alloc_noncoherent"))); - -EXPORT_SYMBOL(dma_alloc_coherent); - -void dma_free_noncoherent(struct device *dev, size_t size, void *vaddr, - dma_addr_t dma_handle) -{ - unsigned long addr = (unsigned long) vaddr; - - free_pages(addr, get_order(size)); -} - -EXPORT_SYMBOL(dma_free_noncoherent); - -void dma_free_coherent(struct device *dev, size_t size, void *vaddr, - dma_addr_t dma_handle) __attribute__((alias("dma_free_noncoherent"))); - -EXPORT_SYMBOL(dma_free_coherent); - -dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); - - return dev_to_baddr(dev, __pa(ptr)); -} - -EXPORT_SYMBOL(dma_map_single); - -void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_unmap_single); - -int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, - enum dma_data_direction direction) -{ - int i; - - BUG_ON(direction == DMA_NONE); - - for (i = 0; i < nents; i++, sg++) { - sg->dma_address = (dma_addr_t) dev_to_baddr(dev, - page_to_phys(sg->page) + sg->offset); - } - - return nents; -} - -EXPORT_SYMBOL(dma_map_sg); - -dma_addr_t dma_map_page(struct device *dev, struct page *page, - unsigned long offset, size_t size, enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); - - return dev_to_baddr(dev, page_to_phys(page) + offset); -} - -EXPORT_SYMBOL(dma_map_page); - -void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_unmap_page); - -void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_unmap_sg); - -void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_sync_single_for_cpu); - -void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_sync_single_for_device); - -void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle, - unsigned long offset, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_sync_single_range_for_cpu); - -void dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle, - unsigned long offset, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_sync_single_range_for_device); - -void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_sync_sg_for_cpu); - -void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_sync_sg_for_device); - -int dma_mapping_error(dma_addr_t dma_addr) -{ - return 0; -} - -EXPORT_SYMBOL(dma_mapping_error); - -int dma_supported(struct device *dev, u64 mask) -{ - /* - * we fall back to GFP_DMA when the mask isn't all 1s, - * so we can't guarantee allocations that must be - * within a tighter range than GFP_DMA.. - */ - if (mask < 0x00ffffff) - return 0; - - return 1; -} - -EXPORT_SYMBOL(dma_supported); - -int dma_is_consistent(struct device *dev, dma_addr_t dma_addr) -{ - return 1; -} - -EXPORT_SYMBOL(dma_is_consistent); - -void dma_cache_sync(struct device *dev, void *vaddr, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_cache_sync); - -dma64_addr_t pci_dac_page_to_dma(struct pci_dev *pdev, - struct page *page, unsigned long offset, int direction) -{ - dma64_addr_t addr = page_to_phys(page) + offset; - - return (dma64_addr_t) pdev_to_baddr(pdev, addr); -} - -EXPORT_SYMBOL(pci_dac_page_to_dma); - -struct page *pci_dac_dma_to_page(struct pci_dev *pdev, - dma64_addr_t dma_addr) -{ - struct bridge_controller *bc = BRIDGE_CONTROLLER(pdev->bus); - - return pfn_to_page((dma_addr - bc->baddr) >> PAGE_SHIFT); -} - -EXPORT_SYMBOL(pci_dac_dma_to_page); - -unsigned long pci_dac_dma_to_offset(struct pci_dev *pdev, - dma64_addr_t dma_addr) -{ - return dma_addr & ~PAGE_MASK; -} - -EXPORT_SYMBOL(pci_dac_dma_to_offset); - -void pci_dac_dma_sync_single_for_cpu(struct pci_dev *pdev, - dma64_addr_t dma_addr, size_t len, int direction) -{ - BUG_ON(direction == PCI_DMA_NONE); -} - -EXPORT_SYMBOL(pci_dac_dma_sync_single_for_cpu); - -void pci_dac_dma_sync_single_for_device(struct pci_dev *pdev, - dma64_addr_t dma_addr, size_t len, int direction) -{ - BUG_ON(direction == PCI_DMA_NONE); -} - -EXPORT_SYMBOL(pci_dac_dma_sync_single_for_device); diff --git a/arch/mips/mm/dma-ip32.c b/arch/mips/mm/dma-ip32.c deleted file mode 100644 index b42b6f7456e6..000000000000 --- a/arch/mips/mm/dma-ip32.c +++ /dev/null @@ -1,383 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2000 Ani Joshi - * Copyright (C) 2000, 2001 Ralf Baechle - * Copyright (C) 2005 Ilya A. Volynets-Evenbakh - * swiped from i386, and cloned for MIPS by Geert, polished by Ralf. - * IP32 changes by Ilya. - */ -#include -#include -#include -#include -#include - -#include -#include -#include - -/* - * Warning on the terminology - Linux calls an uncached area coherent; - * MIPS terminology calls memory areas with hardware maintained coherency - * coherent. - */ - -/* - * Few notes. - * 1. CPU sees memory as two chunks: 0-256M@0x0, and the rest @0x40000000+256M - * 2. PCI sees memory as one big chunk @0x0 (or we could use 0x40000000 for native-endian) - * 3. All other devices see memory as one big chunk at 0x40000000 - * 4. Non-PCI devices will pass NULL as struct device* - * Thus we translate differently, depending on device. - */ - -#define RAM_OFFSET_MASK 0x3fffffff - -void *dma_alloc_noncoherent(struct device *dev, size_t size, - dma_addr_t * dma_handle, gfp_t gfp) -{ - void *ret; - /* ignore region specifiers */ - gfp &= ~(__GFP_DMA | __GFP_HIGHMEM); - - if (dev == NULL || (dev->coherent_dma_mask < 0xffffffff)) - gfp |= GFP_DMA; - ret = (void *) __get_free_pages(gfp, get_order(size)); - - if (ret != NULL) { - unsigned long addr = virt_to_phys(ret)&RAM_OFFSET_MASK; - memset(ret, 0, size); - if(dev==NULL) - addr+= CRIME_HI_MEM_BASE; - *dma_handle = addr; - } - - return ret; -} - -EXPORT_SYMBOL(dma_alloc_noncoherent); - -void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t * dma_handle, gfp_t gfp) -{ - void *ret; - - ret = dma_alloc_noncoherent(dev, size, dma_handle, gfp); - if (ret) { - dma_cache_wback_inv((unsigned long) ret, size); - ret = UNCAC_ADDR(ret); - } - - return ret; -} - -EXPORT_SYMBOL(dma_alloc_coherent); - -void dma_free_noncoherent(struct device *dev, size_t size, void *vaddr, - dma_addr_t dma_handle) -{ - free_pages((unsigned long) vaddr, get_order(size)); -} - -EXPORT_SYMBOL(dma_free_noncoherent); - -void dma_free_coherent(struct device *dev, size_t size, void *vaddr, - dma_addr_t dma_handle) -{ - unsigned long addr = (unsigned long) vaddr; - - addr = CAC_ADDR(addr); - free_pages(addr, get_order(size)); -} - -EXPORT_SYMBOL(dma_free_coherent); - -static inline void __dma_sync(unsigned long addr, size_t size, - enum dma_data_direction direction) -{ - switch (direction) { - case DMA_TO_DEVICE: - dma_cache_wback(addr, size); - break; - - case DMA_FROM_DEVICE: - dma_cache_inv(addr, size); - break; - - case DMA_BIDIRECTIONAL: - dma_cache_wback_inv(addr, size); - break; - - default: - BUG(); - } -} - -dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size, - enum dma_data_direction direction) -{ - unsigned long addr = (unsigned long) ptr; - - switch (direction) { - case DMA_TO_DEVICE: - dma_cache_wback(addr, size); - break; - - case DMA_FROM_DEVICE: - dma_cache_inv(addr, size); - break; - - case DMA_BIDIRECTIONAL: - dma_cache_wback_inv(addr, size); - break; - - default: - BUG(); - } - - addr = virt_to_phys(ptr)&RAM_OFFSET_MASK; - if(dev == NULL) - addr+=CRIME_HI_MEM_BASE; - return (dma_addr_t)addr; -} - -EXPORT_SYMBOL(dma_map_single); - -void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, - enum dma_data_direction direction) -{ - switch (direction) { - case DMA_TO_DEVICE: - break; - - case DMA_FROM_DEVICE: - break; - - case DMA_BIDIRECTIONAL: - break; - - default: - BUG(); - } -} - -EXPORT_SYMBOL(dma_unmap_single); - -int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, - enum dma_data_direction direction) -{ - int i; - - BUG_ON(direction == DMA_NONE); - - for (i = 0; i < nents; i++, sg++) { - unsigned long addr; - - addr = (unsigned long) page_address(sg->page)+sg->offset; - if (addr) - __dma_sync(addr, sg->length, direction); - addr = __pa(addr)&RAM_OFFSET_MASK; - if(dev == NULL) - addr += CRIME_HI_MEM_BASE; - sg->dma_address = (dma_addr_t)addr; - } - - return nents; -} - -EXPORT_SYMBOL(dma_map_sg); - -dma_addr_t dma_map_page(struct device *dev, struct page *page, - unsigned long offset, size_t size, enum dma_data_direction direction) -{ - unsigned long addr; - - BUG_ON(direction == DMA_NONE); - - addr = (unsigned long) page_address(page) + offset; - dma_cache_wback_inv(addr, size); - addr = __pa(addr)&RAM_OFFSET_MASK; - if(dev == NULL) - addr += CRIME_HI_MEM_BASE; - - return (dma_addr_t)addr; -} - -EXPORT_SYMBOL(dma_map_page); - -void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); - - if (direction != DMA_TO_DEVICE) { - unsigned long addr; - - dma_address&=RAM_OFFSET_MASK; - addr = dma_address + PAGE_OFFSET; - if(dma_address>=256*1024*1024) - addr+=CRIME_HI_MEM_BASE; - dma_cache_wback_inv(addr, size); - } -} - -EXPORT_SYMBOL(dma_unmap_page); - -void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries, - enum dma_data_direction direction) -{ - unsigned long addr; - int i; - - BUG_ON(direction == DMA_NONE); - - if (direction == DMA_TO_DEVICE) - return; - - for (i = 0; i < nhwentries; i++, sg++) { - addr = (unsigned long) page_address(sg->page); - if (!addr) - continue; - dma_cache_wback_inv(addr + sg->offset, sg->length); - } -} - -EXPORT_SYMBOL(dma_unmap_sg); - -void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, - size_t size, enum dma_data_direction direction) -{ - unsigned long addr; - - BUG_ON(direction == DMA_NONE); - - dma_handle&=RAM_OFFSET_MASK; - addr = dma_handle + PAGE_OFFSET; - if(dma_handle>=256*1024*1024) - addr+=CRIME_HI_MEM_BASE; - __dma_sync(addr, size, direction); -} - -EXPORT_SYMBOL(dma_sync_single_for_cpu); - -void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, - size_t size, enum dma_data_direction direction) -{ - unsigned long addr; - - BUG_ON(direction == DMA_NONE); - - dma_handle&=RAM_OFFSET_MASK; - addr = dma_handle + PAGE_OFFSET; - if(dma_handle>=256*1024*1024) - addr+=CRIME_HI_MEM_BASE; - __dma_sync(addr, size, direction); -} - -EXPORT_SYMBOL(dma_sync_single_for_device); - -void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle, - unsigned long offset, size_t size, enum dma_data_direction direction) -{ - unsigned long addr; - - BUG_ON(direction == DMA_NONE); - - dma_handle&=RAM_OFFSET_MASK; - addr = dma_handle + offset + PAGE_OFFSET; - if(dma_handle>=256*1024*1024) - addr+=CRIME_HI_MEM_BASE; - __dma_sync(addr, size, direction); -} - -EXPORT_SYMBOL(dma_sync_single_range_for_cpu); - -void dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle, - unsigned long offset, size_t size, enum dma_data_direction direction) -{ - unsigned long addr; - - BUG_ON(direction == DMA_NONE); - - dma_handle&=RAM_OFFSET_MASK; - addr = dma_handle + offset + PAGE_OFFSET; - if(dma_handle>=256*1024*1024) - addr+=CRIME_HI_MEM_BASE; - __dma_sync(addr, size, direction); -} - -EXPORT_SYMBOL(dma_sync_single_range_for_device); - -void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems, - enum dma_data_direction direction) -{ - int i; - - BUG_ON(direction == DMA_NONE); - - /* Make sure that gcc doesn't leave the empty loop body. */ - for (i = 0; i < nelems; i++, sg++) - __dma_sync((unsigned long)page_address(sg->page), - sg->length, direction); -} - -EXPORT_SYMBOL(dma_sync_sg_for_cpu); - -void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems, - enum dma_data_direction direction) -{ - int i; - - BUG_ON(direction == DMA_NONE); - - /* Make sure that gcc doesn't leave the empty loop body. */ - for (i = 0; i < nelems; i++, sg++) - __dma_sync((unsigned long)page_address(sg->page), - sg->length, direction); -} - -EXPORT_SYMBOL(dma_sync_sg_for_device); - -int dma_mapping_error(dma_addr_t dma_addr) -{ - return 0; -} - -EXPORT_SYMBOL(dma_mapping_error); - -int dma_supported(struct device *dev, u64 mask) -{ - /* - * we fall back to GFP_DMA when the mask isn't all 1s, - * so we can't guarantee allocations that must be - * within a tighter range than GFP_DMA.. - */ - if (mask < 0x00ffffff) - return 0; - - return 1; -} - -EXPORT_SYMBOL(dma_supported); - -int dma_is_consistent(struct device *dev, dma_addr_t dma_addr) -{ - return 1; -} - -EXPORT_SYMBOL(dma_is_consistent); - -void dma_cache_sync(struct device *dev, void *vaddr, size_t size, - enum dma_data_direction direction) -{ - if (direction == DMA_NONE) - return; - - dma_cache_wback_inv((unsigned long)vaddr, size); -} - -EXPORT_SYMBOL(dma_cache_sync); - diff --git a/arch/mips/mm/dma-noncoherent.c b/arch/mips/mm/dma-noncoherent.c deleted file mode 100644 index 8cecef0957c3..000000000000 --- a/arch/mips/mm/dma-noncoherent.c +++ /dev/null @@ -1,370 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2000 Ani Joshi - * Copyright (C) 2000, 2001 Ralf Baechle - * swiped from i386, and cloned for MIPS by Geert, polished by Ralf. - */ -#include -#include -#include -#include -#include - -#include -#include - -/* - * Warning on the terminology - Linux calls an uncached area coherent; - * MIPS terminology calls memory areas with hardware maintained coherency - * coherent. - */ - -void *dma_alloc_noncoherent(struct device *dev, size_t size, - dma_addr_t * dma_handle, gfp_t gfp) -{ - void *ret; - /* ignore region specifiers */ - gfp &= ~(__GFP_DMA | __GFP_HIGHMEM); - - if (dev == NULL || (dev->coherent_dma_mask < 0xffffffff)) - gfp |= GFP_DMA; - ret = (void *) __get_free_pages(gfp, get_order(size)); - - if (ret != NULL) { - memset(ret, 0, size); - *dma_handle = virt_to_phys(ret); - } - - return ret; -} - -EXPORT_SYMBOL(dma_alloc_noncoherent); - -void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t * dma_handle, gfp_t gfp) -{ - void *ret; - - ret = dma_alloc_noncoherent(dev, size, dma_handle, gfp); - if (ret) { - dma_cache_wback_inv((unsigned long) ret, size); - ret = UNCAC_ADDR(ret); - } - - return ret; -} - -EXPORT_SYMBOL(dma_alloc_coherent); - -void dma_free_noncoherent(struct device *dev, size_t size, void *vaddr, - dma_addr_t dma_handle) -{ - free_pages((unsigned long) vaddr, get_order(size)); -} - -EXPORT_SYMBOL(dma_free_noncoherent); - -void dma_free_coherent(struct device *dev, size_t size, void *vaddr, - dma_addr_t dma_handle) -{ - unsigned long addr = (unsigned long) vaddr; - - addr = CAC_ADDR(addr); - free_pages(addr, get_order(size)); -} - -EXPORT_SYMBOL(dma_free_coherent); - -static inline void __dma_sync(unsigned long addr, size_t size, - enum dma_data_direction direction) -{ - switch (direction) { - case DMA_TO_DEVICE: - dma_cache_wback(addr, size); - break; - - case DMA_FROM_DEVICE: - dma_cache_inv(addr, size); - break; - - case DMA_BIDIRECTIONAL: - dma_cache_wback_inv(addr, size); - break; - - default: - BUG(); - } -} - -dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size, - enum dma_data_direction direction) -{ - unsigned long addr = (unsigned long) ptr; - - __dma_sync(addr, size, direction); - - return virt_to_phys(ptr); -} - -EXPORT_SYMBOL(dma_map_single); - -void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, - enum dma_data_direction direction) -{ - unsigned long addr; - addr = dma_addr + PAGE_OFFSET; - - //__dma_sync(addr, size, direction); -} - -EXPORT_SYMBOL(dma_unmap_single); - -int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, - enum dma_data_direction direction) -{ - int i; - - BUG_ON(direction == DMA_NONE); - - for (i = 0; i < nents; i++, sg++) { - unsigned long addr; - - addr = (unsigned long) page_address(sg->page); - if (addr) { - __dma_sync(addr + sg->offset, sg->length, direction); - sg->dma_address = (dma_addr_t)page_to_phys(sg->page) - + sg->offset; - } - } - - return nents; -} - -EXPORT_SYMBOL(dma_map_sg); - -dma_addr_t dma_map_page(struct device *dev, struct page *page, - unsigned long offset, size_t size, enum dma_data_direction direction) -{ - unsigned long addr; - - BUG_ON(direction == DMA_NONE); - - addr = (unsigned long) page_address(page) + offset; - dma_cache_wback_inv(addr, size); - - return page_to_phys(page) + offset; -} - -EXPORT_SYMBOL(dma_map_page); - -void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); - - if (direction != DMA_TO_DEVICE) { - unsigned long addr; - - addr = dma_address + PAGE_OFFSET; - dma_cache_wback_inv(addr, size); - } -} - -EXPORT_SYMBOL(dma_unmap_page); - -void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries, - enum dma_data_direction direction) -{ - unsigned long addr; - int i; - - BUG_ON(direction == DMA_NONE); - - if (direction == DMA_TO_DEVICE) - return; - - for (i = 0; i < nhwentries; i++, sg++) { - addr = (unsigned long) page_address(sg->page); - if (addr) - __dma_sync(addr + sg->offset, sg->length, direction); - } -} - -EXPORT_SYMBOL(dma_unmap_sg); - -void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, - size_t size, enum dma_data_direction direction) -{ - unsigned long addr; - - BUG_ON(direction == DMA_NONE); - - addr = dma_handle + PAGE_OFFSET; - __dma_sync(addr, size, direction); -} - -EXPORT_SYMBOL(dma_sync_single_for_cpu); - -void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, - size_t size, enum dma_data_direction direction) -{ - unsigned long addr; - - BUG_ON(direction == DMA_NONE); - - addr = dma_handle + PAGE_OFFSET; - __dma_sync(addr, size, direction); -} - -EXPORT_SYMBOL(dma_sync_single_for_device); - -void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle, - unsigned long offset, size_t size, enum dma_data_direction direction) -{ - unsigned long addr; - - BUG_ON(direction == DMA_NONE); - - addr = dma_handle + offset + PAGE_OFFSET; - __dma_sync(addr, size, direction); -} - -EXPORT_SYMBOL(dma_sync_single_range_for_cpu); - -void dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle, - unsigned long offset, size_t size, enum dma_data_direction direction) -{ - unsigned long addr; - - BUG_ON(direction == DMA_NONE); - - addr = dma_handle + offset + PAGE_OFFSET; - __dma_sync(addr, size, direction); -} - -EXPORT_SYMBOL(dma_sync_single_range_for_device); - -void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems, - enum dma_data_direction direction) -{ - int i; - - BUG_ON(direction == DMA_NONE); - - /* Make sure that gcc doesn't leave the empty loop body. */ - for (i = 0; i < nelems; i++, sg++) - __dma_sync((unsigned long)page_address(sg->page), - sg->length, direction); -} - -EXPORT_SYMBOL(dma_sync_sg_for_cpu); - -void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems, - enum dma_data_direction direction) -{ - int i; - - BUG_ON(direction == DMA_NONE); - - /* Make sure that gcc doesn't leave the empty loop body. */ - for (i = 0; i < nelems; i++, sg++) - __dma_sync((unsigned long)page_address(sg->page), - sg->length, direction); -} - -EXPORT_SYMBOL(dma_sync_sg_for_device); - -int dma_mapping_error(dma_addr_t dma_addr) -{ - return 0; -} - -EXPORT_SYMBOL(dma_mapping_error); - -int dma_supported(struct device *dev, u64 mask) -{ - /* - * we fall back to GFP_DMA when the mask isn't all 1s, - * so we can't guarantee allocations that must be - * within a tighter range than GFP_DMA.. - */ - if (mask < 0x00ffffff) - return 0; - - return 1; -} - -EXPORT_SYMBOL(dma_supported); - -int dma_is_consistent(struct device *dev, dma_addr_t dma_addr) -{ - return 1; -} - -EXPORT_SYMBOL(dma_is_consistent); - -void dma_cache_sync(struct device *dev, void *vaddr, size_t size, - enum dma_data_direction direction) -{ - if (direction == DMA_NONE) - return; - - dma_cache_wback_inv((unsigned long)vaddr, size); -} - -EXPORT_SYMBOL(dma_cache_sync); - -/* The DAC routines are a PCIism.. */ - -#ifdef CONFIG_PCI - -#include - -dma64_addr_t pci_dac_page_to_dma(struct pci_dev *pdev, - struct page *page, unsigned long offset, int direction) -{ - return (dma64_addr_t)page_to_phys(page) + offset; -} - -EXPORT_SYMBOL(pci_dac_page_to_dma); - -struct page *pci_dac_dma_to_page(struct pci_dev *pdev, - dma64_addr_t dma_addr) -{ - return mem_map + (dma_addr >> PAGE_SHIFT); -} - -EXPORT_SYMBOL(pci_dac_dma_to_page); - -unsigned long pci_dac_dma_to_offset(struct pci_dev *pdev, - dma64_addr_t dma_addr) -{ - return dma_addr & ~PAGE_MASK; -} - -EXPORT_SYMBOL(pci_dac_dma_to_offset); - -void pci_dac_dma_sync_single_for_cpu(struct pci_dev *pdev, - dma64_addr_t dma_addr, size_t len, int direction) -{ - BUG_ON(direction == PCI_DMA_NONE); - - dma_cache_wback_inv(dma_addr + PAGE_OFFSET, len); -} - -EXPORT_SYMBOL(pci_dac_dma_sync_single_for_cpu); - -void pci_dac_dma_sync_single_for_device(struct pci_dev *pdev, - dma64_addr_t dma_addr, size_t len, int direction) -{ - BUG_ON(direction == PCI_DMA_NONE); - - dma_cache_wback_inv(dma_addr + PAGE_OFFSET, len); -} - -EXPORT_SYMBOL(pci_dac_dma_sync_single_for_device); - -#endif /* CONFIG_PCI */ diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index 82b20c28bef8..bf85995ca042 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -2,7 +2,7 @@ # Makefile for the PCI specific kernel interface routines under Linux. # -obj-y += pci.o +obj-y += pci.o pci-dac.o # # PCI bus host bridge specific code diff --git a/arch/mips/pci/pci-dac.c b/arch/mips/pci/pci-dac.c new file mode 100644 index 000000000000..0f0ea1b7d4dd --- /dev/null +++ b/arch/mips/pci/pci-dac.c @@ -0,0 +1,79 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2000 Ani Joshi + * Copyright (C) 2000, 2001, 06 Ralf Baechle + * swiped from i386, and cloned for MIPS by Geert, polished by Ralf. + */ + +#include +#include +#include +#include +#include + +#include +#include + +#include + +#include + +dma64_addr_t pci_dac_page_to_dma(struct pci_dev *pdev, + struct page *page, unsigned long offset, int direction) +{ + struct device *dev = &pdev->dev; + + BUG_ON(direction == DMA_NONE); + + if (!plat_device_is_coherent(dev)) { + unsigned long addr; + + addr = (unsigned long) page_address(page) + offset; + dma_cache_wback_inv(addr, PAGE_SIZE); + } + + return plat_map_dma_mem_page(dev, page) + offset; +} + +EXPORT_SYMBOL(pci_dac_page_to_dma); + +struct page *pci_dac_dma_to_page(struct pci_dev *pdev, + dma64_addr_t dma_addr) +{ + return pfn_to_page(plat_dma_addr_to_phys(dma_addr) >> PAGE_SHIFT); +} + +EXPORT_SYMBOL(pci_dac_dma_to_page); + +unsigned long pci_dac_dma_to_offset(struct pci_dev *pdev, + dma64_addr_t dma_addr) +{ + return dma_addr & ~PAGE_MASK; +} + +EXPORT_SYMBOL(pci_dac_dma_to_offset); + +void pci_dac_dma_sync_single_for_cpu(struct pci_dev *pdev, + dma64_addr_t dma_addr, size_t len, int direction) +{ + BUG_ON(direction == PCI_DMA_NONE); + + if (!plat_device_is_coherent(&pdev->dev)) + dma_cache_wback_inv(dma_addr + PAGE_OFFSET, len); +} + +EXPORT_SYMBOL(pci_dac_dma_sync_single_for_cpu); + +void pci_dac_dma_sync_single_for_device(struct pci_dev *pdev, + dma64_addr_t dma_addr, size_t len, int direction) +{ + BUG_ON(direction == PCI_DMA_NONE); + + if (!plat_device_is_coherent(&pdev->dev)) + dma_cache_wback_inv(dma_addr + PAGE_OFFSET, len); +} + +EXPORT_SYMBOL(pci_dac_dma_sync_single_for_device); -- cgit v1.2.3 From af3d10d52d38d2c56a8bca9943c07b00031fc718 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 12 Feb 2007 23:26:01 +0000 Subject: [MIPS] IP27: Enable N32 support in defconfig. Signed-off-by: Ralf Baechle --- arch/mips/configs/ip27_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig index 96090f28373b..f21186c12d81 100644 --- a/arch/mips/configs/ip27_defconfig +++ b/arch/mips/configs/ip27_defconfig @@ -264,7 +264,7 @@ CONFIG_BINFMT_ELF=y CONFIG_MIPS32_COMPAT=y CONFIG_COMPAT=y CONFIG_MIPS32_O32=y -# CONFIG_MIPS32_N32 is not set +CONFIG_MIPS32_N32=y CONFIG_BINFMT_ELF32=y # -- cgit v1.2.3 From dd02f06aa96ab4590da12704366450a2d4753d3c Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 13 Feb 2007 00:50:57 +0000 Subject: [MIPS] signal: Fix warnings in o32 compat code. Signed-off-by: Ralf Baechle --- arch/mips/kernel/signal32.c | 26 +++++++++++++++++++++++--- 1 file changed, 23 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c index 183fc7e55f34..1b9262d3fd23 100644 --- a/arch/mips/kernel/signal32.c +++ b/arch/mips/kernel/signal32.c @@ -139,8 +139,20 @@ struct ucontext32 { sigset_t32 uc_sigmask; /* mask last for extensibility */ }; +/* + * Horribly complicated - with the bloody RM9000 workarounds enabled + * the signal trampolines is moving to the end of the structure so we can + * increase the alignment without breaking software compatibility. + */ #if ICACHE_REFILLS_WORKAROUND_WAR == 0 +struct sigframe32 { + u32 sf_ass[4]; /* argument save space for o32 */ + u32 sf_code[2]; /* signal trampoline */ + struct sigcontext32 sf_sc; + sigset_t sf_mask; +}; + struct rt_sigframe32 { u32 rs_ass[4]; /* argument save space for o32 */ u32 rs_code[2]; /* signal trampoline */ @@ -150,6 +162,14 @@ struct rt_sigframe32 { #else /* ICACHE_REFILLS_WORKAROUND_WAR */ +struct sigframe32 { + u32 sf_ass[4]; /* argument save space for o32 */ + u32 sf_pad[2]; + struct sigcontext32 sf_sc; /* hw context */ + sigset_t sf_mask; + u32 sf_code[8] ____cacheline_aligned; /* signal trampoline */ +}; + struct rt_sigframe32 { u32 rs_ass[4]; /* argument save space for o32 */ u32 rs_pad[2]; @@ -493,10 +513,10 @@ int copy_siginfo_to_user32(compat_siginfo_t __user *to, siginfo_t *from) asmlinkage void sys32_sigreturn(nabi_no_regargs struct pt_regs regs) { - struct sigframe __user *frame; + struct sigframe32 __user *frame; sigset_t blocked; - frame = (struct sigframe __user *) regs.regs[29]; + frame = (struct sigframe32 __user *) regs.regs[29]; if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) goto badframe; if (__copy_from_user(&blocked, &frame->sf_mask, sizeof(blocked))) @@ -581,7 +601,7 @@ badframe: int setup_frame_32(struct k_sigaction * ka, struct pt_regs *regs, int signr, sigset_t *set) { - struct sigframe __user *frame; + struct sigframe32 __user *frame; int err = 0; frame = get_sigframe(ka, regs, sizeof(*frame)); -- cgit v1.2.3 From 205d84aaea380bbd1cc1079d44086cd50c2c2dad Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 13 Feb 2007 01:28:09 +0000 Subject: [MIPS] signal: Move {restore,setup}_sigcontext prototypes to their user Signed-off-by: Ralf Baechle --- arch/mips/kernel/signal-common.h | 6 ------ arch/mips/kernel/signal_n32.c | 4 ++++ 2 files changed, 4 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/signal-common.h b/arch/mips/kernel/signal-common.h index 9a8abd67ec5c..d9a832f67e8a 100644 --- a/arch/mips/kernel/signal-common.h +++ b/arch/mips/kernel/signal-common.h @@ -45,12 +45,6 @@ struct sigframe { #endif /* !ICACHE_REFILLS_WORKAROUND_WAR */ -/* - * handle hardware context - */ -extern int setup_sigcontext(struct pt_regs *, struct sigcontext __user *); -extern int restore_sigcontext(struct pt_regs *, struct sigcontext __user *); - /* * Determine which stack to use.. */ diff --git a/arch/mips/kernel/signal_n32.c b/arch/mips/kernel/signal_n32.c index 57456e6a0c62..b17ef04691e3 100644 --- a/arch/mips/kernel/signal_n32.c +++ b/arch/mips/kernel/signal_n32.c @@ -49,6 +49,10 @@ #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) +extern int setup_sigcontext(struct pt_regs *, struct sigcontext __user *); +extern int restore_sigcontext(struct pt_regs *, struct sigcontext __user *); + + /* IRIX compatible stack_t */ typedef struct sigaltstack32 { s32 ss_sp; -- cgit v1.2.3 From 66680583461d7cae281cef63c050c9b6371e3286 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 13 Feb 2007 01:31:48 +0000 Subject: [MIPS] signal: Move sigframe definition for native O32/N64 into signal.c Signed-off-by: Ralf Baechle --- arch/mips/kernel/signal-common.h | 26 -------------------------- arch/mips/kernel/signal.c | 20 ++++++++++++++++++++ 2 files changed, 20 insertions(+), 26 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/signal-common.h b/arch/mips/kernel/signal-common.h index d9a832f67e8a..b95e542ace27 100644 --- a/arch/mips/kernel/signal-common.h +++ b/arch/mips/kernel/signal-common.h @@ -19,32 +19,6 @@ # define DEBUGP(fmt, args...) #endif -/* - * Horribly complicated - with the bloody RM9000 workarounds enabled - * the signal trampolines is moving to the end of the structure so we can - * increase the alignment without breaking software compatibility. - */ -#if ICACHE_REFILLS_WORKAROUND_WAR == 0 - -struct sigframe { - u32 sf_ass[4]; /* argument save space for o32 */ - u32 sf_code[2]; /* signal trampoline */ - struct sigcontext sf_sc; - sigset_t sf_mask; -}; - -#else /* ICACHE_REFILLS_WORKAROUND_WAR */ - -struct sigframe { - u32 sf_ass[4]; /* argument save space for o32 */ - u32 sf_pad[2]; - struct sigcontext sf_sc; /* hw context */ - sigset_t sf_mask; - u32 sf_code[8] ____cacheline_aligned; /* signal trampoline */ -}; - -#endif /* !ICACHE_REFILLS_WORKAROUND_WAR */ - /* * Determine which stack to use.. */ diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c index 54398af2371f..e7b04928caec 100644 --- a/arch/mips/kernel/signal.c +++ b/arch/mips/kernel/signal.c @@ -36,8 +36,20 @@ #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) +/* + * Horribly complicated - with the bloody RM9000 workarounds enabled + * the signal trampolines is moving to the end of the structure so we can + * increase the alignment without breaking software compatibility. + */ #if ICACHE_REFILLS_WORKAROUND_WAR == 0 +struct sigframe { + u32 sf_ass[4]; /* argument save space for o32 */ + u32 sf_code[2]; /* signal trampoline */ + struct sigcontext sf_sc; + sigset_t sf_mask; +}; + struct rt_sigframe { u32 rs_ass[4]; /* argument save space for o32 */ u32 rs_code[2]; /* signal trampoline */ @@ -47,6 +59,14 @@ struct rt_sigframe { #else +struct sigframe { + u32 sf_ass[4]; /* argument save space for o32 */ + u32 sf_pad[2]; + struct sigcontext sf_sc; /* hw context */ + sigset_t sf_mask; + u32 sf_code[8] ____cacheline_aligned; /* signal trampoline */ +}; + struct rt_sigframe { u32 rs_ass[4]; /* argument save space for o32 */ u32 rs_pad[2]; -- cgit v1.2.3 From 24c556e99ec8a61ce1fbc75bee61dc19edf2c4df Mon Sep 17 00:00:00 2001 From: Franck Bui-Huu Date: Fri, 9 Feb 2007 16:07:37 +0100 Subject: [MIPS] signals: make common _BLOCKABLE macro Signed-off-by: Franck Bui-Huu Signed-off-by: Ralf Baechle --- arch/mips/kernel/signal-common.h | 2 ++ arch/mips/kernel/signal.c | 2 -- arch/mips/kernel/signal32.c | 2 -- arch/mips/kernel/signal_n32.c | 2 -- 4 files changed, 2 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/signal-common.h b/arch/mips/kernel/signal-common.h index b95e542ace27..fdbdbdc65b54 100644 --- a/arch/mips/kernel/signal-common.h +++ b/arch/mips/kernel/signal-common.h @@ -19,6 +19,8 @@ # define DEBUGP(fmt, args...) #endif +#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) + /* * Determine which stack to use.. */ diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c index e7b04928caec..b2e9ab1bb101 100644 --- a/arch/mips/kernel/signal.c +++ b/arch/mips/kernel/signal.c @@ -34,8 +34,6 @@ #include "signal-common.h" -#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) - /* * Horribly complicated - with the bloody RM9000 workarounds enabled * the signal trampolines is moving to the end of the structure so we can diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c index 1b9262d3fd23..db00c333bff3 100644 --- a/arch/mips/kernel/signal32.c +++ b/arch/mips/kernel/signal32.c @@ -104,8 +104,6 @@ typedef struct compat_siginfo { #define __NR_O32_rt_sigreturn 4193 #define __NR_O32_restart_syscall 4253 -#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) - /* 32-bit compatibility types */ #define _NSIG_BPW32 32 diff --git a/arch/mips/kernel/signal_n32.c b/arch/mips/kernel/signal_n32.c index b17ef04691e3..1a5f248faf3b 100644 --- a/arch/mips/kernel/signal_n32.c +++ b/arch/mips/kernel/signal_n32.c @@ -47,8 +47,6 @@ #define __NR_N32_rt_sigreturn 6211 #define __NR_N32_restart_syscall 6214 -#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) - extern int setup_sigcontext(struct pt_regs *, struct sigcontext __user *); extern int restore_sigcontext(struct pt_regs *, struct sigcontext __user *); -- cgit v1.2.3 From d01f06ef0c783eceb53030fc5407caa94586bd6a Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Mon, 12 Feb 2007 23:48:26 +0900 Subject: [MIPS] DECstation: Fix irq handling When I post a patch (commit f431baa55abf8adeed0c718b51deacbc151f58f1), I just tried to not change behavior of existing codes, but it seems dec/int-handler.S had been broken since its previous commit 937a801576f954bd030d7c4a5a94571710d87c0b. The caller of plat_irq_dispatch do setup/restore TI_REGS($28), so dec's plat_irq_dispatch should not do it, and there is no need to adjust RA. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/dec/int-handler.S | 4 ---- 1 file changed, 4 deletions(-) (limited to 'arch') diff --git a/arch/mips/dec/int-handler.S b/arch/mips/dec/int-handler.S index b251ef864c33..00cecdcc75f2 100644 --- a/arch/mips/dec/int-handler.S +++ b/arch/mips/dec/int-handler.S @@ -264,9 +264,6 @@ srlv t3,t1,t2 handle_it: - LONG_L s0, TI_REGS($28) - LONG_S sp, TI_REGS($28) - PTR_LA ra, ret_from_irq j dec_irq_dispatch nop @@ -277,7 +274,6 @@ fpu: #endif spurious: - PTR_LA ra, _ret_from_irq j spurious_interrupt nop END(plat_irq_dispatch) -- cgit v1.2.3 From 7da8a581f5ec0ecac5f0afc9ec26ce13b780d48d Mon Sep 17 00:00:00 2001 From: Franck Bui-Huu Date: Tue, 13 Feb 2007 14:50:18 +0100 Subject: [MIPS] Make entry.S a little more readable. When CONFIG_PREEMPT is not set, it also moves one branch instruction from ret_from_irq() to ret_from_exception(). Therefore we favour the return from irq case which should be more common than the other one. Signed-off-by: Franck Bui-Huu Acked-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/kernel/entry.S | 19 ++++++++----------- 1 file changed, 8 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/entry.S b/arch/mips/kernel/entry.S index f10b6a19f8bf..0b78fcbf044a 100644 --- a/arch/mips/kernel/entry.S +++ b/arch/mips/kernel/entry.S @@ -21,24 +21,21 @@ #endif #ifndef CONFIG_PREEMPT - .macro preempt_stop - local_irq_disable - .endm #define resume_kernel restore_all +#else +#define __ret_from_irq ret_from_exception #endif .text .align 5 -FEXPORT(ret_from_irq) - LONG_S s0, TI_REGS($28) -#ifdef CONFIG_PREEMPT -FEXPORT(ret_from_exception) -#else - b _ret_from_irq +#ifndef CONFIG_PREEMPT FEXPORT(ret_from_exception) - preempt_stop + local_irq_disable # preempt stop + b __ret_from_irq #endif -FEXPORT(_ret_from_irq) +FEXPORT(ret_from_irq) + LONG_S s0, TI_REGS($28) +FEXPORT(__ret_from_irq) LONG_L t0, PT_STATUS(sp) # returning to kernel mode? andi t0, t0, KU_USER beqz t0, resume_kernel -- cgit v1.2.3 From 366d6aef281a670b32a51d289fc07bf0e5e72d9a Mon Sep 17 00:00:00 2001 From: Andrew Sharp Date: Fri, 9 Feb 2007 17:35:28 -0800 Subject: [MIPS] Fix uniprocessor Sibyte builds. Signed-off-by: Andrew Sharp Signed-off-by: Ralf Baechle --- arch/mips/mm/c-sb1.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/mips/mm/c-sb1.c b/arch/mips/mm/c-sb1.c index 3a8afd47feaa..9ea460b16bda 100644 --- a/arch/mips/mm/c-sb1.c +++ b/arch/mips/mm/c-sb1.c @@ -259,6 +259,12 @@ static void sb1_flush_cache_data_page(unsigned long addr) on_each_cpu(sb1_flush_cache_data_page_ipi, (void *) addr, 1, 1); } #else + +static void local_sb1_flush_cache_data_page(unsigned long addr) +{ + __sb1_writeback_inv_dcache_range(addr, addr + PAGE_SIZE); +} + void sb1_flush_cache_data_page(unsigned long) __attribute__((alias("local_sb1_flush_cache_data_page"))); #endif -- cgit v1.2.3 From 431dc8040354db65e4f8d4d4e21ae4fab41f5bc3 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 13 Feb 2007 00:05:11 +0000 Subject: [MIPS] Fix sigset_t endianess swapping issues in 32-bit compat code. Signed-off-by: Ralf Baechle --- arch/mips/kernel/linux32.c | 47 ++++++++++++++++++++++++++++++++++++++++++ arch/mips/kernel/scall64-64.S | 2 +- arch/mips/kernel/scall64-n32.S | 2 +- arch/mips/kernel/signal32.c | 11 ++++++---- arch/mips/kernel/signal_n32.c | 7 ++++--- 5 files changed, 60 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c index ca7ad78f4def..fc4dd6c9dd80 100644 --- a/arch/mips/kernel/linux32.c +++ b/arch/mips/kernel/linux32.c @@ -39,6 +39,7 @@ #include #include +#include #include #include #include @@ -736,3 +737,49 @@ _sys32_clone(nabi_no_regargs struct pt_regs regs) return do_fork(clone_flags, newsp, ®s, 0, parent_tidptr, child_tidptr); } + +/* + * Implement the event wait interface for the eventpoll file. It is the kernel + * part of the user space epoll_pwait(2). + */ +asmlinkage long compat_sys_epoll_pwait(int epfd, + struct epoll_event __user *events, int maxevents, int timeout, + const compat_sigset_t __user *sigmask, size_t sigsetsize) +{ + int error; + sigset_t ksigmask, sigsaved; + + /* + * If the caller wants a certain signal mask to be set during the wait, + * we apply it here. + */ + if (sigmask) { + if (sigsetsize != sizeof(sigset_t)) + return -EINVAL; + if (!access_ok(VERIFY_READ, sigmask, sizeof(ksigmask))) + return -EFAULT; + if (__copy_conv_sigset_from_user(&ksigmask, sigmask)) + return -EFAULT; + sigdelsetmask(&ksigmask, sigmask(SIGKILL) | sigmask(SIGSTOP)); + sigprocmask(SIG_SETMASK, &ksigmask, &sigsaved); + } + + error = sys_epoll_wait(epfd, events, maxevents, timeout); + + /* + * If we changed the signal mask, we need to restore the original one. + * In case we've got a signal while waiting, we do not restore the + * signal mask yet, and we allow do_signal() to deliver the signal on + * the way back to userspace, before the signal mask is restored. + */ + if (sigmask) { + if (error == -EINTR) { + memcpy(¤t->saved_sigmask, &sigsaved, + sizeof(sigsaved)); + set_thread_flag(TIF_RESTORE_SIGMASK); + } else + sigprocmask(SIG_SETMASK, &sigsaved, NULL); + } + + return error; +} diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S index e569b846e9a3..10e9a18630aa 100644 --- a/arch/mips/kernel/scall64-64.S +++ b/arch/mips/kernel/scall64-64.S @@ -470,4 +470,4 @@ sys_call_table: PTR sys_get_robust_list PTR sys_kexec_load /* 5270 */ PTR sys_getcpu - PTR sys_epoll_pwait + PTR compat_sys_epoll_pwait diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index ee8802b59758..2ceda4644a4d 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -396,4 +396,4 @@ EXPORT(sysn32_call_table) PTR compat_sys_get_robust_list PTR compat_sys_kexec_load PTR sys_getcpu - PTR sys_epoll_pwait + PTR compat_sys_epoll_pwait diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c index db00c333bff3..c28cb21514c8 100644 --- a/arch/mips/kernel/signal32.c +++ b/arch/mips/kernel/signal32.c @@ -8,6 +8,7 @@ * Copyright (C) 1999, 2000 Silicon Graphics, Inc. */ #include +#include #include #include #include @@ -24,6 +25,7 @@ #include #include +#include #include #include #include @@ -517,7 +519,7 @@ asmlinkage void sys32_sigreturn(nabi_no_regargs struct pt_regs regs) frame = (struct sigframe32 __user *) regs.regs[29]; if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) goto badframe; - if (__copy_from_user(&blocked, &frame->sf_mask, sizeof(blocked))) + if (__copy_conv_sigset_from_user(&blocked, &frame->sf_mask)) goto badframe; sigdelsetmask(&blocked, ~_BLOCKABLE); @@ -554,7 +556,7 @@ asmlinkage void sys32_rt_sigreturn(nabi_no_regargs struct pt_regs regs) frame = (struct rt_sigframe32 __user *) regs.regs[29]; if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) goto badframe; - if (__copy_from_user(&set, &frame->rs_uc.uc_sigmask, sizeof(set))) + if (__copy_conv_sigset_from_user(&set, &frame->rs_uc.uc_sigmask)) goto badframe; sigdelsetmask(&set, ~_BLOCKABLE); @@ -609,7 +611,8 @@ int setup_frame_32(struct k_sigaction * ka, struct pt_regs *regs, err |= install_sigtramp(frame->sf_code, __NR_O32_sigreturn); err |= setup_sigcontext32(regs, &frame->sf_sc); - err |= __copy_to_user(&frame->sf_mask, set, sizeof(*set)); + err |= __copy_conv_sigset_to_user(&frame->sf_mask, set); + if (err) goto give_sigsegv; @@ -668,7 +671,7 @@ int setup_rt_frame_32(struct k_sigaction * ka, struct pt_regs *regs, err |= __put_user(current->sas_ss_size, &frame->rs_uc.uc_stack.ss_size); err |= setup_sigcontext32(regs, &frame->rs_uc.uc_mcontext); - err |= __copy_to_user(&frame->rs_uc.uc_sigmask, set, sizeof(*set)); + err |= __copy_conv_sigset_to_user(&frame->rs_uc.uc_sigmask, set); if (err) goto give_sigsegv; diff --git a/arch/mips/kernel/signal_n32.c b/arch/mips/kernel/signal_n32.c index 1a5f248faf3b..7ca2a078841f 100644 --- a/arch/mips/kernel/signal_n32.c +++ b/arch/mips/kernel/signal_n32.c @@ -31,6 +31,7 @@ #include #include +#include #include #include #include @@ -63,7 +64,7 @@ struct ucontextn32 { s32 uc_link; stack32_t uc_stack; struct sigcontext uc_mcontext; - sigset_t uc_sigmask; /* mask last for extensibility */ + compat_sigset_t uc_sigmask; /* mask last for extensibility */ }; #if ICACHE_REFILLS_WORKAROUND_WAR == 0 @@ -129,7 +130,7 @@ asmlinkage void sysn32_rt_sigreturn(nabi_no_regargs struct pt_regs regs) frame = (struct rt_sigframe_n32 __user *) regs.regs[29]; if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) goto badframe; - if (__copy_from_user(&set, &frame->rs_uc.uc_sigmask, sizeof(set))) + if (__copy_conv_sigset_from_user(&set, &frame->rs_uc.uc_sigmask)) goto badframe; sigdelsetmask(&set, ~_BLOCKABLE); @@ -195,7 +196,7 @@ int setup_rt_frame_n32(struct k_sigaction * ka, err |= __put_user(current->sas_ss_size, &frame->rs_uc.uc_stack.ss_size); err |= setup_sigcontext(regs, &frame->rs_uc.uc_mcontext); - err |= __copy_to_user(&frame->rs_uc.uc_sigmask, set, sizeof(*set)); + err |= __copy_conv_sigset_to_user(&frame->rs_uc.uc_sigmask, set); if (err) goto give_sigsegv; -- cgit v1.2.3 From 577830b034bc11c93d4b9e21e8782900d5485e7f Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 8 Feb 2007 18:33:51 +1100 Subject: [POWERPC] Consolidate pseries platform header files into pseries.h Following the example of platforms/pasemi, consolidate a couple of tiny header files in platforms/pseries into pseries.h. This gives us a convenient place to put things that need to be available to the platform code, but not public. And hopefully will help people resist the temptation of sticking externs in C files. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pseries/firmware.h | 17 ----------------- arch/powerpc/platforms/pseries/pseries.h | 20 ++++++++++++++++++++ arch/powerpc/platforms/pseries/ras.c | 2 +- arch/powerpc/platforms/pseries/ras.h | 9 --------- arch/powerpc/platforms/pseries/setup.c | 4 ++-- 5 files changed, 23 insertions(+), 29 deletions(-) delete mode 100644 arch/powerpc/platforms/pseries/firmware.h create mode 100644 arch/powerpc/platforms/pseries/pseries.h delete mode 100644 arch/powerpc/platforms/pseries/ras.h (limited to 'arch') diff --git a/arch/powerpc/platforms/pseries/firmware.h b/arch/powerpc/platforms/pseries/firmware.h deleted file mode 100644 index 714f56f55362..000000000000 --- a/arch/powerpc/platforms/pseries/firmware.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * Copyright 2006 IBM Corporation. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _PSERIES_FIRMWARE_H -#define _PSERIES_FIRMWARE_H - -#include - -extern void __init fw_feature_init(void); - -#endif /* _PSERIES_FIRMWARE_H */ diff --git a/arch/powerpc/platforms/pseries/pseries.h b/arch/powerpc/platforms/pseries/pseries.h new file mode 100644 index 000000000000..37618cb896cb --- /dev/null +++ b/arch/powerpc/platforms/pseries/pseries.h @@ -0,0 +1,20 @@ +/* + * Copyright 2006 IBM Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _PSERIES_PSERIES_H +#define _PSERIES_PSERIES_H + +extern void __init fw_feature_init(void); + +struct pt_regs; + +extern int pSeries_system_reset_exception(struct pt_regs *regs); +extern int pSeries_machine_check_exception(struct pt_regs *regs); + +#endif /* _PSERIES_PSERIES_H */ diff --git a/arch/powerpc/platforms/pseries/ras.c b/arch/powerpc/platforms/pseries/ras.c index b1d3d161249e..edc038873113 100644 --- a/arch/powerpc/platforms/pseries/ras.c +++ b/arch/powerpc/platforms/pseries/ras.c @@ -51,7 +51,7 @@ #include #include -#include "ras.h" +#include "pseries.h" static unsigned char ras_log_buf[RTAS_ERROR_LOG_MAX]; static DEFINE_SPINLOCK(ras_log_buf_lock); diff --git a/arch/powerpc/platforms/pseries/ras.h b/arch/powerpc/platforms/pseries/ras.h deleted file mode 100644 index 0e66b0da55e2..000000000000 --- a/arch/powerpc/platforms/pseries/ras.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef _PSERIES_RAS_H -#define _PSERIES_RAS_H - -struct pt_regs; - -extern int pSeries_system_reset_exception(struct pt_regs *regs); -extern int pSeries_machine_check_exception(struct pt_regs *regs); - -#endif /* _PSERIES_RAS_H */ diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 042ecae107ac..a28264ce1044 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -65,10 +65,10 @@ #include #include #include +#include #include "plpar_wrappers.h" -#include "ras.h" -#include "firmware.h" +#include "pseries.h" #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) -- cgit v1.2.3 From 8feaeca23ab8f520e7af2a862fd6ea8e7bfd8854 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 8 Feb 2007 18:33:55 +1100 Subject: [POWERPC] Cleanup pseries smp initialisation code Move some extern declarations from setup.c into the new pseries.h. While we're at it, provide dummy implementations for !SMP, to avoid cluttering the C file with more #ifdefs. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pseries/pseries.h | 8 ++++++++ arch/powerpc/platforms/pseries/setup.c | 6 ------ arch/powerpc/platforms/pseries/smp.c | 1 + 3 files changed, 9 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/pseries/pseries.h b/arch/powerpc/platforms/pseries/pseries.h index 37618cb896cb..36c791572682 100644 --- a/arch/powerpc/platforms/pseries/pseries.h +++ b/arch/powerpc/platforms/pseries/pseries.h @@ -17,4 +17,12 @@ struct pt_regs; extern int pSeries_system_reset_exception(struct pt_regs *regs); extern int pSeries_machine_check_exception(struct pt_regs *regs); +#ifdef CONFIG_SMP +extern void smp_init_pseries_mpic(void); +extern void smp_init_pseries_xics(void); +#else +static inline smp_init_pseries_mpic(void) { }; +static inline smp_init_pseries_xics(void) { }; +#endif + #endif /* _PSERIES_PSERIES_H */ diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index a28264ce1044..769815680be1 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -77,8 +77,6 @@ #endif /* move those away to a .h */ -extern void smp_init_pseries_mpic(void); -extern void smp_init_pseries_xics(void); extern void find_udbg_vterm(void); int fwnmi_active; /* TRUE if an FWNMI handler is present */ @@ -272,18 +270,14 @@ static void __init pseries_discover_pic(void) #ifdef CONFIG_KEXEC ppc_md.kexec_cpu_down = pseries_kexec_cpu_down_mpic; #endif -#ifdef CONFIG_SMP smp_init_pseries_mpic(); -#endif return; } else if (strstr(typep, "ppc-xicp")) { ppc_md.init_IRQ = xics_init_IRQ; #ifdef CONFIG_KEXEC ppc_md.kexec_cpu_down = pseries_kexec_cpu_down_xics; #endif -#ifdef CONFIG_SMP smp_init_pseries_xics(); -#endif return; } } diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c index 4408518eaebe..116305b22a2b 100644 --- a/arch/powerpc/platforms/pseries/smp.c +++ b/arch/powerpc/platforms/pseries/smp.c @@ -48,6 +48,7 @@ #include #include "plpar_wrappers.h" +#include "pseries.h" #ifdef DEBUG #include -- cgit v1.2.3 From dce623e0827e8d0ad60ce7f385c3394bf1b0bae0 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 8 Feb 2007 18:33:55 +1100 Subject: [POWERPC] Cleanup pseries kexec code Move all the pseries kexec code into one file, platforms/pseries/kexec.c Provide helpers for setting up ppc_md.kexec_cpu_down, so that we don't have to have #ifdef CONFIG_KEXEC in setup.c Move the initialisation of the ppc_md kexec callbacks into an init routine. This is well and truly early enough to cause no change in behaviour, we can't kexec until userspace has given us a kernel to kexec into. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pseries/Makefile | 1 + arch/powerpc/platforms/pseries/kexec.c | 72 ++++++++++++++++++++++++++++++++ arch/powerpc/platforms/pseries/pseries.h | 8 ++++ arch/powerpc/platforms/pseries/setup.c | 50 +--------------------- 4 files changed, 83 insertions(+), 48 deletions(-) create mode 100644 arch/powerpc/platforms/pseries/kexec.c (limited to 'arch') diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile index 69590fbf83da..dc0583bdbc63 100644 --- a/arch/powerpc/platforms/pseries/Makefile +++ b/arch/powerpc/platforms/pseries/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_XICS) += xics.o obj-$(CONFIG_SCANLOG) += scanlog.o obj-$(CONFIG_EEH) += eeh.o eeh_cache.o eeh_driver.o eeh_event.o +obj-$(CONFIG_KEXEC) += kexec.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug-cpu.o diff --git a/arch/powerpc/platforms/pseries/kexec.c b/arch/powerpc/platforms/pseries/kexec.c new file mode 100644 index 000000000000..af2685607458 --- /dev/null +++ b/arch/powerpc/platforms/pseries/kexec.c @@ -0,0 +1,72 @@ +/* + * Copyright 2006 Michael Ellerman, IBM Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include + +#include "pseries.h" +#include "xics.h" +#include "plpar_wrappers.h" + +static void pseries_kexec_cpu_down(int crash_shutdown, int secondary) +{ + /* Don't risk a hypervisor call if we're crashing */ + if (firmware_has_feature(FW_FEATURE_SPLPAR) && !crash_shutdown) { + unsigned long addr; + + addr = __pa(get_slb_shadow()); + if (unregister_slb_shadow(hard_smp_processor_id(), addr)) + printk("SLB shadow buffer deregistration of " + "cpu %u (hw_cpu_id %d) failed\n", + smp_processor_id(), + hard_smp_processor_id()); + + addr = __pa(get_lppaca()); + if (unregister_vpa(hard_smp_processor_id(), addr)) { + printk("VPA deregistration of cpu %u (hw_cpu_id %d) " + "failed\n", smp_processor_id(), + hard_smp_processor_id()); + } + } +} + +static void pseries_kexec_cpu_down_mpic(int crash_shutdown, int secondary) +{ + pseries_kexec_cpu_down(crash_shutdown, secondary); + mpic_teardown_this_cpu(secondary); +} + +void __init setup_kexec_cpu_down_mpic(void) +{ + ppc_md.kexec_cpu_down = pseries_kexec_cpu_down_mpic; +} + +static void pseries_kexec_cpu_down_xics(int crash_shutdown, int secondary) +{ + pseries_kexec_cpu_down(crash_shutdown, secondary); + xics_teardown_cpu(secondary); +} + +void __init setup_kexec_cpu_down_xics(void) +{ + ppc_md.kexec_cpu_down = pseries_kexec_cpu_down_xics; +} + +static int __init pseries_kexec_setup(void) +{ + ppc_md.machine_kexec = default_machine_kexec; + ppc_md.machine_kexec_prepare = default_machine_kexec_prepare; + ppc_md.machine_crash_shutdown = default_machine_crash_shutdown; + + return 0; +} +__initcall(pseries_kexec_setup); diff --git a/arch/powerpc/platforms/pseries/pseries.h b/arch/powerpc/platforms/pseries/pseries.h index 36c791572682..b43f1397a5b6 100644 --- a/arch/powerpc/platforms/pseries/pseries.h +++ b/arch/powerpc/platforms/pseries/pseries.h @@ -25,4 +25,12 @@ static inline smp_init_pseries_mpic(void) { }; static inline smp_init_pseries_xics(void) { }; #endif +#ifdef CONFIG_KEXEC +extern void setup_kexec_cpu_down_xics(void); +extern void setup_kexec_cpu_down_mpic(void); +#else +static inline setup_kexec_cpu_down_xics(void) { }; +static inline setup_kexec_cpu_down_mpic(void) { }; +#endif + #endif /* _PSERIES_PSERIES_H */ diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 769815680be1..435a04596526 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -55,7 +55,6 @@ #include #include #include -#include #include #include #include "xics.h" @@ -219,42 +218,6 @@ static void pseries_lpar_enable_pmcs(void) get_lppaca()->pmcregs_in_use = 1; } -#ifdef CONFIG_KEXEC -static void pseries_kexec_cpu_down(int crash_shutdown, int secondary) -{ - /* Don't risk a hypervisor call if we're crashing */ - if (firmware_has_feature(FW_FEATURE_SPLPAR) && !crash_shutdown) { - unsigned long addr; - - addr = __pa(get_slb_shadow()); - if (unregister_slb_shadow(hard_smp_processor_id(), addr)) - printk("SLB shadow buffer deregistration of " - "cpu %u (hw_cpu_id %d) failed\n", - smp_processor_id(), - hard_smp_processor_id()); - - addr = __pa(get_lppaca()); - if (unregister_vpa(hard_smp_processor_id(), addr)) { - printk("VPA deregistration of cpu %u (hw_cpu_id %d) " - "failed\n", smp_processor_id(), - hard_smp_processor_id()); - } - } -} - -static void pseries_kexec_cpu_down_mpic(int crash_shutdown, int secondary) -{ - pseries_kexec_cpu_down(crash_shutdown, secondary); - mpic_teardown_this_cpu(secondary); -} - -static void pseries_kexec_cpu_down_xics(int crash_shutdown, int secondary) -{ - pseries_kexec_cpu_down(crash_shutdown, secondary); - xics_teardown_cpu(secondary); -} -#endif /* CONFIG_KEXEC */ - static void __init pseries_discover_pic(void) { struct device_node *np; @@ -267,16 +230,12 @@ static void __init pseries_discover_pic(void) pSeries_mpic_node = of_node_get(np); ppc_md.init_IRQ = pseries_mpic_init_IRQ; ppc_md.get_irq = mpic_get_irq; -#ifdef CONFIG_KEXEC - ppc_md.kexec_cpu_down = pseries_kexec_cpu_down_mpic; -#endif + setup_kexec_cpu_down_mpic(); smp_init_pseries_mpic(); return; } else if (strstr(typep, "ppc-xicp")) { ppc_md.init_IRQ = xics_init_IRQ; -#ifdef CONFIG_KEXEC - ppc_md.kexec_cpu_down = pseries_kexec_cpu_down_xics; -#endif + setup_kexec_cpu_down_xics(); smp_init_pseries_xics(); return; } @@ -548,9 +507,4 @@ define_machine(pseries) { .check_legacy_ioport = pSeries_check_legacy_ioport, .system_reset_exception = pSeries_system_reset_exception, .machine_check_exception = pSeries_machine_check_exception, -#ifdef CONFIG_KEXEC - .machine_kexec = default_machine_kexec, - .machine_kexec_prepare = default_machine_kexec_prepare, - .machine_crash_shutdown = default_machine_crash_shutdown, -#endif }; -- cgit v1.2.3 From 775aeff44774c6933d8f9c14e1f325d8acd03136 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 8 Feb 2007 18:34:04 +1100 Subject: [POWERPC] Move MPIC smp routines into mpic.c Move a couple of MPIC smp routines into mpic.c, they're inside an SMP block in mpic.c - so they're still only built for SMP. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/smp.c | 23 ----------------------- arch/powerpc/sysdev/mpic.c | 21 +++++++++++++++++++++ 2 files changed, 21 insertions(+), 23 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 0e8beca460af..924d692bc8f9 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -78,29 +78,6 @@ int smt_enabled_at_boot = 1; static void (*crash_ipi_function_ptr)(struct pt_regs *) = NULL; -#ifdef CONFIG_MPIC -int __init smp_mpic_probe(void) -{ - int nr_cpus; - - DBG("smp_mpic_probe()...\n"); - - nr_cpus = cpus_weight(cpu_possible_map); - - DBG("nr_cpus: %d\n", nr_cpus); - - if (nr_cpus > 1) - mpic_request_ipis(); - - return nr_cpus; -} - -void __devinit smp_mpic_setup_cpu(int cpu) -{ - mpic_setup_this_cpu(); -} -#endif /* CONFIG_MPIC */ - #ifdef CONFIG_PPC64 void __devinit smp_generic_kick_cpu(int nr) { diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index aa701cc27ecc..4e54a09dd33b 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -1395,4 +1395,25 @@ void smp_mpic_message_pass(int target, int msg) break; } } + +int __init smp_mpic_probe(void) +{ + int nr_cpus; + + DBG("smp_mpic_probe()...\n"); + + nr_cpus = cpus_weight(cpu_possible_map); + + DBG("nr_cpus: %d\n", nr_cpus); + + if (nr_cpus > 1) + mpic_request_ipis(); + + return nr_cpus; +} + +void __devinit smp_mpic_setup_cpu(int cpu) +{ + mpic_setup_this_cpu(); +} #endif /* CONFIG_SMP */ -- cgit v1.2.3 From 8d38a5b2fab1397d35ba1c92828a91b77ce9f865 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 13 Feb 2007 21:35:38 +0100 Subject: [POWERPC] Open Firmware serial port driver This can be used for serial ports that are connected to an OF platform bus but are not autodetected by the lecacy serial support. It will automatically take over devices that come from the legacy serial detection, which usually is only one device. In some cases, rtas may be set up to use the serial port in the firmware, which allows easier debugging before probing the serial ports. In this case, the "used-by-rtas" property must be set by the firmware. This patch also adds code to the legacy serial driver to check for this. Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/legacy_serial.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c index 89f46f377922..325f490a10cc 100644 --- a/arch/powerpc/kernel/legacy_serial.c +++ b/arch/powerpc/kernel/legacy_serial.c @@ -124,6 +124,10 @@ static int __init add_legacy_soc_port(struct device_node *np, if (get_property(np, "clock-frequency", NULL) == NULL) return -1; + /* if rtas uses this device, don't try to use it as well */ + if (get_property(np, "used-by-rtas", NULL) != NULL) + return -1; + /* Get the address */ addrp = of_get_address(soc_dev, 0, NULL, NULL); if (addrp == NULL) @@ -334,6 +338,17 @@ void __init find_legacy_serial_ports(void) of_node_put(tsi); } + /* First fill our array with opb bus ports */ + for (np = NULL; (np = of_find_compatible_node(np, "serial", "ns16750")) != NULL;) { + struct device_node *opb = of_get_parent(np); + if (opb && !strcmp(opb->type, "opb")) { + index = add_legacy_soc_port(np, np); + if (index >= 0 && np == stdout) + legacy_serial_console = index; + } + of_node_put(opb); + } + #ifdef CONFIG_PCI /* Next, try to locate PCI ports */ for (np = NULL; (np = of_find_all_nodes(np));) { -- cgit v1.2.3 From 719c91ccadd3ed26570dbb29d54166914832eee9 Mon Sep 17 00:00:00 2001 From: David Gibson Date: Tue, 13 Feb 2007 15:54:22 +1100 Subject: [POWERPC] Use udbg_early_init() on ppc32 udbg_early_init() is a function used on 64 bit systems, which initializes whichever early udbg backend is configured. This function is not called on 32-bit, however if btext early debug is enabled it does have an explicit, inline, #ifdef-ed assignment performing analagous initialization. This patch makes things more uniform by folding the btext initialization as an option into udbg_early_init() and calling that from the 32-bit setup path. Signed-off-by: David Gibson Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/btext.c | 9 +++++++++ arch/powerpc/kernel/setup_32.c | 8 ++------ arch/powerpc/kernel/udbg.c | 2 ++ 3 files changed, 13 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/btext.c b/arch/powerpc/kernel/btext.c index 93f21aaf7c8e..3678997339d6 100644 --- a/arch/powerpc/kernel/btext.c +++ b/arch/powerpc/kernel/btext.c @@ -18,6 +18,7 @@ #include #include #include +#include #define NO_SCROLL @@ -912,3 +913,11 @@ static unsigned char vga_font[cmapsz] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, }; + +void __init udbg_init_btext(void) +{ + /* If btext is enabled, we might have a BAT setup for early display, + * thus we do enable some very basic udbg output + */ + udbg_putc = btext_drawchar; +} diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index 6a19fa40dcee..44a6a3c47feb 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -116,12 +116,8 @@ unsigned long __init early_init(unsigned long dt_ptr) */ void __init machine_init(unsigned long dt_ptr, unsigned long phys) { - /* If btext is enabled, we might have a BAT setup for early display, - * thus we do enable some very basic udbg output - */ -#ifdef CONFIG_BOOTX_TEXT - udbg_putc = btext_drawchar; -#endif + /* Enable early debugging if any specified (see udbg.h) */ + udbg_early_init(); /* Do some early initialization based on the flat device tree */ early_init_devtree(__va(dt_ptr)); diff --git a/arch/powerpc/kernel/udbg.c b/arch/powerpc/kernel/udbg.c index 194a93eeb3e7..7e0971868fc2 100644 --- a/arch/powerpc/kernel/udbg.c +++ b/arch/powerpc/kernel/udbg.c @@ -49,6 +49,8 @@ void __init udbg_early_init(void) udbg_init_debug_beat(); #elif defined(CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE) udbg_init_pas_realmode(); +#elif defined(CONFIG_BOOTX_TEXT) + udbg_init_btext(); #endif } -- cgit v1.2.3 From b6f45a4b071d77777d70e097d429273aeedff717 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=B3=20Bilski?= Date: Mon, 12 Feb 2007 22:19:12 +0100 Subject: [CPUFREQ] EPS - Correct 2nd brand test Solution for small, but nasty bug: access beyond end of f_table for C7 brand. Signed-off-by: Rafal Bilski Signed-off-by: Dave Jones --- arch/i386/kernel/cpu/cpufreq/e_powersaver.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/i386/kernel/cpu/cpufreq/e_powersaver.c b/arch/i386/kernel/cpu/cpufreq/e_powersaver.c index 3243725f80ca..f43d98e11cc7 100644 --- a/arch/i386/kernel/cpu/cpufreq/e_powersaver.c +++ b/arch/i386/kernel/cpu/cpufreq/e_powersaver.c @@ -234,7 +234,7 @@ static int eps_cpu_init(struct cpufreq_policy *policy) /* Fill frequency and MSR value table */ f_table = ¢aur->freq_table[0]; - if (brand == EPS_BRAND_EDEN) { + if (brand != EPS_BRAND_C7M) { f_table[0].frequency = fsb * min_multiplier; f_table[0].index = (min_multiplier << 8) | min_voltage; f_table[1].frequency = fsb * max_multiplier; -- cgit v1.2.3 From db2e1fa3f0eefbbe04e90d6e4d290ee176b28248 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 14 Feb 2007 14:13:10 +0900 Subject: sh: Revert TLB miss fast-path changes that broke PTEA parts. This ended up causing problems for older parts (particularly ones using PTEA). Revert this for now, it can be added back in once it's had some more testing. Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh3/entry.S | 201 ++++------------------------------------- arch/sh/mm/fault.c | 87 ++++++++++++++++++ 2 files changed, 107 insertions(+), 181 deletions(-) (limited to 'arch') diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S index 1c520358ba90..c19205b0f2c0 100644 --- a/arch/sh/kernel/cpu/sh3/entry.S +++ b/arch/sh/kernel/cpu/sh3/entry.S @@ -13,10 +13,8 @@ #include #include #include -#include #include -#include -#include +#include ! NOTE: ! GNU as (as of 2.9.1) changes bf/s into bt/s and bra, when the address @@ -138,14 +136,29 @@ ENTRY(tlb_protection_violation_store) call_dpf: mov.l 1f, r0 - mov.l @r0, r6 ! address + mov r5, r8 + mov.l @r0, r6 + mov r6, r9 + mov.l 2f, r0 + sts pr, r10 + jsr @r0 + mov r15, r4 + ! + tst r0, r0 + bf/s 0f + lds r10, pr + rts + nop +0: sti mov.l 3f, r0 - + mov r9, r6 + mov r8, r5 jmp @r0 - mov r15, r4 ! regs + mov r15, r4 .align 2 1: .long MMU_TEA +2: .long __do_page_fault 3: .long do_page_fault .align 2 @@ -332,171 +345,9 @@ general_exception: ! ! -/* gas doesn't flag impossible values for mov #immediate as an error */ -#if (_PAGE_PRESENT >> 2) > 0x7f -#error cannot load PAGE_PRESENT as an immediate -#endif -#if _PAGE_DIRTY > 0x7f -#error cannot load PAGE_DIRTY as an immediate -#endif -#if (_PAGE_PRESENT << 2) != _PAGE_ACCESSED -#error cannot derive PAGE_ACCESSED from PAGE_PRESENT -#endif - -#if defined(CONFIG_CPU_SH4) -#define ldmmupteh(r) mov.l 8f, r -#else -#define ldmmupteh(r) mov #MMU_PTEH, r -#endif - .balign 1024,0,1024 tlb_miss: -#ifdef COUNT_EXCEPTIONS - ! Increment the counts - mov.l 9f, k1 - mov.l @k1, k2 - add #1, k2 - mov.l k2, @k1 -#endif - - ! k0 scratch - ! k1 pgd and pte pointers - ! k2 faulting address - ! k3 pgd and pte index masks - ! k4 shift - - ! Load up the pgd entry (k1) - - ldmmupteh(k0) ! 9 LS (latency=2) MMU_PTEH - - mov.w 4f, k3 ! 8 LS (latency=2) (PTRS_PER_PGD-1) << 2 - mov #-(PGDIR_SHIFT-2), k4 ! 6 EX - - mov.l @(MMU_TEA-MMU_PTEH,k0), k2 ! 18 LS (latency=2) - - mov.l @(MMU_TTB-MMU_PTEH,k0), k1 ! 18 LS (latency=2) - - mov k2, k0 ! 5 MT (latency=0) - shld k4, k0 ! 99 EX - - and k3, k0 ! 78 EX - - mov.l @(k0, k1), k1 ! 21 LS (latency=2) - mov #-(PAGE_SHIFT-2), k4 ! 6 EX - - ! Load up the pte entry (k2) - - mov k2, k0 ! 5 MT (latency=0) - shld k4, k0 ! 99 EX - - tst k1, k1 ! 86 MT - - bt 20f ! 110 BR - - mov.w 3f, k3 ! 8 LS (latency=2) (PTRS_PER_PTE-1) << 2 - and k3, k0 ! 78 EX - mov.w 5f, k4 ! 8 LS (latency=2) _PAGE_PRESENT - - mov.l @(k0, k1), k2 ! 21 LS (latency=2) - add k0, k1 ! 49 EX - -#ifdef CONFIG_CPU_HAS_PTEA - ! Test the entry for present and _PAGE_ACCESSED - - mov #-28, k3 ! 6 EX - mov k2, k0 ! 5 MT (latency=0) - - tst k4, k2 ! 68 MT - shld k3, k0 ! 99 EX - - bt 20f ! 110 BR - - ! Set PTEA register - ! MMU_PTEA = ((pteval >> 28) & 0xe) | (pteval & 0x1) - ! - ! k0=pte>>28, k1=pte*, k2=pte, k3=, k4=_PAGE_PRESENT - - and #0xe, k0 ! 79 EX - - mov k0, k3 ! 5 MT (latency=0) - mov k2, k0 ! 5 MT (latency=0) - - and #1, k0 ! 79 EX - - or k0, k3 ! 82 EX - - ldmmupteh(k0) ! 9 LS (latency=2) - shll2 k4 ! 101 EX _PAGE_ACCESSED - - tst k4, k2 ! 68 MT - - mov.l k3, @(MMU_PTEA-MMU_PTEH,k0) ! 27 LS - - mov.l 7f, k3 ! 9 LS (latency=2) _PAGE_FLAGS_HARDWARE_MASK - - ! k0=MMU_PTEH, k1=pte*, k2=pte, k3=_PAGE_FLAGS_HARDWARE, k4=_PAGE_ACCESSED -#else - - ! Test the entry for present and _PAGE_ACCESSED - - mov.l 7f, k3 ! 9 LS (latency=2) _PAGE_FLAGS_HARDWARE_MASK - tst k4, k2 ! 68 MT - - shll2 k4 ! 101 EX _PAGE_ACCESSED - ldmmupteh(k0) ! 9 LS (latency=2) - - bt 20f ! 110 BR - tst k4, k2 ! 68 MT - - ! k0=MMU_PTEH, k1=pte*, k2=pte, k3=_PAGE_FLAGS_HARDWARE, k4=_PAGE_ACCESSED - -#endif - - ! Set up the entry - - and k2, k3 ! 78 EX - bt/s 10f ! 108 BR - - mov.l k3, @(MMU_PTEL-MMU_PTEH,k0) ! 27 LS - - ldtlb ! 128 CO - - ! At least one instruction between ldtlb and rte - nop ! 119 NOP - - rte ! 126 CO - - nop ! 119 NOP - - -10: or k4, k2 ! 82 EX - - ldtlb ! 128 CO - - ! At least one instruction between ldtlb and rte - mov.l k2, @k1 ! 27 LS - - rte ! 126 CO - - ! Note we cannot execute mov here, because it is executed after - ! restoring SSR, so would be executed in user space. - nop ! 119 NOP - - - .align 5 - ! Once cache line if possible... -1: .long swapper_pg_dir -3: .short (PTRS_PER_PTE-1) << 2 -4: .short (PTRS_PER_PGD-1) << 2 -5: .long _PAGE_PRESENT -7: .long _PAGE_FLAGS_HARDWARE_MASK -8: .long MMU_PTEH -#ifdef COUNT_EXCEPTIONS -9: .long exception_count_miss -#endif - - ! Either pgd or pte not present -20: mov.l 1f, k2 + mov.l 1f, k2 mov.l 4f, k3 bra handle_exception mov.l @k2, k2 @@ -647,15 +498,6 @@ skip_save: bf interrupt_exception shlr2 r8 shlr r8 - -#ifdef COUNT_EXCEPTIONS - mov.l 5f, r9 - add r8, r9 - mov.l @r9, r10 - add #1, r10 - mov.l r10, @r9 -#endif - mov.l 4f, r9 add r8, r9 mov.l @r9, r9 @@ -669,9 +511,6 @@ skip_save: 2: .long 0x000080f0 ! FD=1, IMASK=15 3: .long 0xcfffffff ! RB=0, BL=0 4: .long exception_handling_table -#ifdef COUNT_EXCEPTIONS -5: .long exception_count_table -#endif interrupt_exception: mov.l 1f, r9 diff --git a/arch/sh/mm/fault.c b/arch/sh/mm/fault.c index 716ebf568af2..fa5d7f0b9f18 100644 --- a/arch/sh/mm/fault.c +++ b/arch/sh/mm/fault.c @@ -17,6 +17,7 @@ #include #include #include +#include #include extern void die(const char *,struct pt_regs *,long); @@ -224,3 +225,89 @@ do_sigbus: if (!user_mode(regs)) goto no_context; } + +#ifdef CONFIG_SH_STORE_QUEUES +/* + * This is a special case for the SH-4 store queues, as pages for this + * space still need to be faulted in before it's possible to flush the + * store queue cache for writeout to the remapped region. + */ +#define P3_ADDR_MAX (P4SEG_STORE_QUE + 0x04000000) +#else +#define P3_ADDR_MAX P4SEG +#endif + +/* + * Called with interrupts disabled. + */ +asmlinkage int __kprobes __do_page_fault(struct pt_regs *regs, + unsigned long writeaccess, + unsigned long address) +{ + pgd_t *pgd; + pud_t *pud; + pmd_t *pmd; + pte_t *pte; + pte_t entry; + struct mm_struct *mm = current->mm; + spinlock_t *ptl; + int ret = 1; + +#ifdef CONFIG_SH_KGDB + if (kgdb_nofault && kgdb_bus_err_hook) + kgdb_bus_err_hook(); +#endif + + /* + * We don't take page faults for P1, P2, and parts of P4, these + * are always mapped, whether it be due to legacy behaviour in + * 29-bit mode, or due to PMB configuration in 32-bit mode. + */ + if (address >= P3SEG && address < P3_ADDR_MAX) { + pgd = pgd_offset_k(address); + mm = NULL; + } else { + if (unlikely(address >= TASK_SIZE || !mm)) + return 1; + + pgd = pgd_offset(mm, address); + } + + pud = pud_offset(pgd, address); + if (pud_none_or_clear_bad(pud)) + return 1; + pmd = pmd_offset(pud, address); + if (pmd_none_or_clear_bad(pmd)) + return 1; + + if (mm) + pte = pte_offset_map_lock(mm, pmd, address, &ptl); + else + pte = pte_offset_kernel(pmd, address); + + entry = *pte; + if (unlikely(pte_none(entry) || pte_not_present(entry))) + goto unlock; + if (unlikely(writeaccess && !pte_write(entry))) + goto unlock; + + if (writeaccess) + entry = pte_mkdirty(entry); + entry = pte_mkyoung(entry); + +#ifdef CONFIG_CPU_SH4 + /* + * ITLB is not affected by "ldtlb" instruction. + * So, we need to flush the entry by ourselves. + */ + local_flush_tlb_one(get_asid(), address & PAGE_MASK); +#endif + + set_pte(pte, entry); + update_mmu_cache(NULL, address, entry); + ret = 0; +unlock: + if (mm) + pte_unmap_unlock(pte, ptl); + return ret; +} -- cgit v1.2.3 From 71074d3a2c70aa8a213222fef5014bfd9b3daf1f Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 14 Feb 2007 14:49:04 +0900 Subject: sh: Fixup r7780rp pata_platform for devres conversion. Tidy up the R7780RP I/O mapping routines and switch the pata_platform resources to IORESOURCE_MEM types, killing off the useless port->addr conversion. This fixes up R7780RP to boot after the recent devres conversion. Signed-off-by: Paul Mundt --- arch/sh/boards/renesas/r7780rp/io.c | 148 +++++++++------------------------ arch/sh/boards/renesas/r7780rp/setup.c | 22 +++-- 2 files changed, 53 insertions(+), 117 deletions(-) (limited to 'arch') diff --git a/arch/sh/boards/renesas/r7780rp/io.c b/arch/sh/boards/renesas/r7780rp/io.c index 369cbf1cd471..f74d2ffb3851 100644 --- a/arch/sh/boards/renesas/r7780rp/io.c +++ b/arch/sh/boards/renesas/r7780rp/io.c @@ -11,22 +11,9 @@ #include #include #include +#include #include #include -#include - -static inline unsigned long port2adr(unsigned int port) -{ - if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6) - if (port == 0x3f6) - return (PA_AREA5_IO + 0x80c); - else - return (PA_AREA5_IO + 0x1000 + ((port-0x1f0) << 1)); - else - maybebadio((unsigned long)port); - - return port; -} static inline unsigned long port88796l(unsigned int port, int flag) { @@ -40,18 +27,6 @@ static inline unsigned long port88796l(unsigned int port, int flag) return addr; } -/* The 7780 R7780RP-1 seems to have everything hooked */ -/* up pretty normally (nothing on high-bytes only...) so this */ -/* shouldn't be needed */ -static inline int shifted_port(unsigned long port) -{ - /* For IDE registers, value is not shifted */ - if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6) - return 0; - else - return 1; -} - #if defined(CONFIG_NE2000) || defined(CONFIG_NE2000_MODULE) #define CHECK_AX88796L_PORT(port) \ ((port >= AX88796L_IO_BASE) && (port < (AX88796L_IO_BASE+0x20))) @@ -70,12 +45,10 @@ u8 r7780rp_inb(unsigned long port) { if (CHECK_AX88796L_PORT(port)) return ctrl_inw(port88796l(port, 0)) & 0xff; - else if (PXSEG(port)) - return ctrl_inb(port); - else if (is_pci_ioaddr(port) || shifted_port(port)) + else if (is_pci_ioaddr(port)) return ctrl_inb(pci_ioaddr(port)); - return ctrl_inw(port2adr(port)) & 0xff; + return ctrl_inw(port) & 0xff; } u8 r7780rp_inb_p(unsigned long port) @@ -84,12 +57,10 @@ u8 r7780rp_inb_p(unsigned long port) if (CHECK_AX88796L_PORT(port)) v = ctrl_inw(port88796l(port, 0)) & 0xff; - else if (PXSEG(port)) - v = ctrl_inb(port); - else if (is_pci_ioaddr(port) || shifted_port(port)) + else if (is_pci_ioaddr(port)) v = ctrl_inb(pci_ioaddr(port)); else - v = ctrl_inw(port2adr(port)) & 0xff; + v = ctrl_inw(port) & 0xff; ctrl_delay(); @@ -98,80 +69,56 @@ u8 r7780rp_inb_p(unsigned long port) u16 r7780rp_inw(unsigned long port) { - if (CHECK_AX88796L_PORT(port)) - maybebadio(port); - else if (PXSEG(port)) - return ctrl_inw(port); - else if (is_pci_ioaddr(port) || shifted_port(port)) + if (is_pci_ioaddr(port)) return ctrl_inw(pci_ioaddr(port)); - else - maybebadio(port); - return 0; + return ctrl_inw(port); } u32 r7780rp_inl(unsigned long port) { - if (CHECK_AX88796L_PORT(port)) - maybebadio(port); - else if (PXSEG(port)) - return ctrl_inl(port); - else if (is_pci_ioaddr(port) || shifted_port(port)) + if (is_pci_ioaddr(port)) return ctrl_inl(pci_ioaddr(port)); - else - maybebadio(port); - return 0; + return ctrl_inl(port); } void r7780rp_outb(u8 value, unsigned long port) { if (CHECK_AX88796L_PORT(port)) ctrl_outw(value, port88796l(port, 0)); - else if (PXSEG(port)) - ctrl_outb(value, port); - else if (is_pci_ioaddr(port) || shifted_port(port)) + else if (is_pci_ioaddr(port)) ctrl_outb(value, pci_ioaddr(port)); else - ctrl_outw(value, port2adr(port)); + ctrl_outb(value, port); } void r7780rp_outb_p(u8 value, unsigned long port) { if (CHECK_AX88796L_PORT(port)) ctrl_outw(value, port88796l(port, 0)); - else if (PXSEG(port)) - ctrl_outb(value, port); - else if (is_pci_ioaddr(port) || shifted_port(port)) + else if (is_pci_ioaddr(port)) ctrl_outb(value, pci_ioaddr(port)); else - ctrl_outw(value, port2adr(port)); + ctrl_outb(value, port); ctrl_delay(); } void r7780rp_outw(u16 value, unsigned long port) { - if (CHECK_AX88796L_PORT(port)) - maybebadio(port); - else if (PXSEG(port)) - ctrl_outw(value, port); - else if (is_pci_ioaddr(port) || shifted_port(port)) + if (is_pci_ioaddr(port)) ctrl_outw(value, pci_ioaddr(port)); else - maybebadio(port); + ctrl_outw(value, port); } void r7780rp_outl(u32 value, unsigned long port) { - if (CHECK_AX88796L_PORT(port)) - maybebadio(port); - else if (PXSEG(port)) - ctrl_outl(value, port); - else if (is_pci_ioaddr(port) || shifted_port(port)) + if (is_pci_ioaddr(port)) ctrl_outl(value, pci_ioaddr(port)); else - maybebadio(port); + ctrl_outl(value, port); } void r7780rp_insb(unsigned long port, void *dst, unsigned long count) @@ -183,16 +130,13 @@ void r7780rp_insb(unsigned long port, void *dst, unsigned long count) p = (volatile u16 *)port88796l(port, 0); while (count--) *buf++ = *p & 0xff; - } else if (PXSEG(port)) { - while (count--) - *buf++ = *(volatile u8 *)port; - } else if (is_pci_ioaddr(port) || shifted_port(port)) { + } else if (is_pci_ioaddr(port)) { volatile u8 *bp = (volatile u8 *)pci_ioaddr(port); while (count--) *buf++ = *bp; } else { - p = (volatile u16 *)port2adr(port); + p = (volatile u16 *)port; while (count--) *buf++ = *p & 0xff; } @@ -205,12 +149,10 @@ void r7780rp_insw(unsigned long port, void *dst, unsigned long count) if (CHECK_AX88796L_PORT(port)) p = (volatile u16 *)port88796l(port, 1); - else if (PXSEG(port)) - p = (volatile u16 *)port; - else if (is_pci_ioaddr(port) || shifted_port(port)) + else if (is_pci_ioaddr(port)) p = (volatile u16 *)pci_ioaddr(port); else - p = (volatile u16 *)port2adr(port); + p = (volatile u16 *)port; while (count--) *buf++ = *p; @@ -220,17 +162,13 @@ void r7780rp_insw(unsigned long port, void *dst, unsigned long count) void r7780rp_insl(unsigned long port, void *dst, unsigned long count) { - u32 *buf = dst; - - if (CHECK_AX88796L_PORT(port)) - maybebadio(port); - else if (is_pci_ioaddr(port) || shifted_port(port)) { + if (is_pci_ioaddr(port)) { volatile u32 *p = (volatile u32 *)pci_ioaddr(port); + u32 *buf = dst; while (count--) *buf++ = *p; - } else - maybebadio(port); + } } void r7780rp_outsb(unsigned long port, const void *src, unsigned long count) @@ -242,19 +180,14 @@ void r7780rp_outsb(unsigned long port, const void *src, unsigned long count) p = (volatile u16 *)port88796l(port, 0); while (count--) *p = *buf++; - } else if (PXSEG(port)) - while (count--) - ctrl_outb(*buf++, port); - else if (is_pci_ioaddr(port) || shifted_port(port)) { + } else if (is_pci_ioaddr(port)) { volatile u8 *bp = (volatile u8 *)pci_ioaddr(port); while (count--) *bp = *buf++; - } else { - p = (volatile u16 *)port2adr(port); + } else while (count--) - *p = *buf++; - } + ctrl_outb(*buf++, port); } void r7780rp_outsw(unsigned long port, const void *src, unsigned long count) @@ -264,12 +197,10 @@ void r7780rp_outsw(unsigned long port, const void *src, unsigned long count) if (CHECK_AX88796L_PORT(port)) p = (volatile u16 *)port88796l(port, 1); - else if (PXSEG(port)) - p = (volatile u16 *)port; - else if (is_pci_ioaddr(port) || shifted_port(port)) + else if (is_pci_ioaddr(port)) p = (volatile u16 *)pci_ioaddr(port); else - p = (volatile u16 *)port2adr(port); + p = (volatile u16 *)port; while (count--) *p = *buf++; @@ -280,26 +211,23 @@ void r7780rp_outsw(unsigned long port, const void *src, unsigned long count) void r7780rp_outsl(unsigned long port, const void *src, unsigned long count) { const u32 *buf = src; + u32 *p; - if (CHECK_AX88796L_PORT(port)) - maybebadio(port); - else if (is_pci_ioaddr(port) || shifted_port(port)) { - volatile u32 *p = (volatile u32 *)pci_ioaddr(port); + if (is_pci_ioaddr(port)) + p = (u32 *)pci_ioaddr(port); + else + p = (u32 *)port; - while (count--) - *p = *buf++; - } else - maybebadio(port); + while (count--) + ctrl_outl(*buf++, (unsigned long)p); } void __iomem *r7780rp_ioport_map(unsigned long port, unsigned int size) { if (CHECK_AX88796L_PORT(port)) return (void __iomem *)port88796l(port, size > 1); - else if (PXSEG(port)) - return (void __iomem *)port; - else if (is_pci_ioaddr(port) || shifted_port(port)) + else if (is_pci_ioaddr(port)) return (void __iomem *)pci_ioaddr(port); - return (void __iomem *)port2adr(port); + return (void __iomem *)port; } diff --git a/arch/sh/boards/renesas/r7780rp/setup.c b/arch/sh/boards/renesas/r7780rp/setup.c index c40f85cc3e5e..0d74db9f1792 100644 --- a/arch/sh/boards/renesas/r7780rp/setup.c +++ b/arch/sh/boards/renesas/r7780rp/setup.c @@ -2,7 +2,7 @@ * arch/sh/boards/renesas/r7780rp/setup.c * * Copyright (C) 2002 Atom Create Engineering Co., Ltd. - * Copyright (C) 2005, 2006 Paul Mundt + * Copyright (C) 2005 - 2007 Paul Mundt * * Renesas Solutions Highlander R7780RP-1 Support. * @@ -12,6 +12,7 @@ */ #include #include +#include #include #include #include @@ -45,14 +46,14 @@ static struct platform_device m66596_usb_host_device = { static struct resource cf_ide_resources[] = { [0] = { - .start = 0x1f0, - .end = 0x1f0 + 8, - .flags = IORESOURCE_IO, + .start = PA_AREA5_IO + 0x1000, + .end = PA_AREA5_IO + 0x1000 + 0x08 - 1, + .flags = IORESOURCE_MEM, }, [1] = { - .start = 0x1f0 + 0x206, - .end = 0x1f0 + 8 + 0x206 + 8, - .flags = IORESOURCE_IO, + .start = PA_AREA5_IO + 0x80c, + .end = PA_AREA5_IO + 0x80c + 0x16 - 1, + .flags = IORESOURCE_MEM, }, [2] = { #ifdef CONFIG_SH_R7780MP @@ -64,11 +65,18 @@ static struct resource cf_ide_resources[] = { }, }; +static struct pata_platform_info pata_info = { + .ioport_shift = 1, +}; + static struct platform_device cf_ide_device = { .name = "pata_platform", .id = -1, .num_resources = ARRAY_SIZE(cf_ide_resources), .resource = cf_ide_resources, + .dev = { + .platform_data = &pata_info, + }, }; static unsigned char heartbeat_bit_pos[] = { 2, 1, 0, 3, 6, 5, 4, 7 }; -- cgit v1.2.3 From e65fa9f59e9230b72ac298d445b4a18a4eefeb34 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 14 Feb 2007 15:06:09 +0900 Subject: sh: Kill off dead bigsur and ec3104 boards. Neither of these have had any maintenance in years, and there's no interest in keeping them straggling along. These have already been slated for removal some time, so finally just get rid of them. Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 11 +- arch/sh/Makefile | 2 - arch/sh/boards/bigsur/Makefile | 6 - arch/sh/boards/bigsur/io.c | 120 -------------- arch/sh/boards/bigsur/irq.c | 334 --------------------------------------- arch/sh/boards/bigsur/led.c | 54 ------- arch/sh/boards/bigsur/setup.c | 88 ----------- arch/sh/boards/ec3104/Makefile | 6 - arch/sh/boards/ec3104/io.c | 81 ---------- arch/sh/boards/ec3104/irq.c | 196 ----------------------- arch/sh/boards/ec3104/setup.c | 65 -------- arch/sh/drivers/pci/Makefile | 1 - arch/sh/drivers/pci/ops-bigsur.c | 83 ---------- arch/sh/drivers/pci/pci-sh7751.c | 9 -- arch/sh/tools/mach-types | 1 - 15 files changed, 1 insertion(+), 1056 deletions(-) delete mode 100644 arch/sh/boards/bigsur/Makefile delete mode 100644 arch/sh/boards/bigsur/io.c delete mode 100644 arch/sh/boards/bigsur/irq.c delete mode 100644 arch/sh/boards/bigsur/led.c delete mode 100644 arch/sh/boards/bigsur/setup.c delete mode 100644 arch/sh/boards/ec3104/Makefile delete mode 100644 arch/sh/boards/ec3104/io.c delete mode 100644 arch/sh/boards/ec3104/irq.c delete mode 100644 arch/sh/boards/ec3104/setup.c delete mode 100644 arch/sh/drivers/pci/ops-bigsur.c (limited to 'arch') diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 90c8c42e7e8b..4d16d8917074 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -135,12 +135,6 @@ config SH_HP6XX More information (hardware only) at . -config SH_EC3104 - bool "EC3104" - help - Select EC3104 if configuring for a system with an Eclipse - International EC3104 chip, e.g. the Harris AD2000. - config SH_SATURN bool "Saturn" select CPU_SUBTYPE_SH7604 @@ -156,9 +150,6 @@ config SH_DREAMCAST . There is a Dreamcast project is at . -config SH_BIGSUR - bool "BigSur" - config SH_MPC1211 bool "Interface MPC1211" help @@ -511,7 +502,7 @@ source "arch/sh/cchips/Kconfig" config HEARTBEAT bool "Heartbeat LED" depends on SH_MPC1211 || SH_SH03 || \ - SH_BIGSUR || SOLUTION_ENGINE || \ + SOLUTION_ENGINE || \ SH_RTS7751R2D || SH_SH4202_MICRODEV || SH_LANDISK || \ SH_R7780RP help diff --git a/arch/sh/Makefile b/arch/sh/Makefile index 4903c7c665a9..bd9b1729f8b8 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -94,10 +94,8 @@ machdir-$(CONFIG_SH_7300_SOLUTION_ENGINE) := se/7300 machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE) := se/7343 machdir-$(CONFIG_SH_73180_SOLUTION_ENGINE) := se/73180 machdir-$(CONFIG_SH_HP6XX) := hp6xx -machdir-$(CONFIG_SH_EC3104) := ec3104 machdir-$(CONFIG_SH_SATURN) := saturn machdir-$(CONFIG_SH_DREAMCAST) := dreamcast -machdir-$(CONFIG_SH_BIGSUR) := bigsur machdir-$(CONFIG_SH_MPC1211) := mpc1211 machdir-$(CONFIG_SH_SH03) := sh03 machdir-$(CONFIG_SH_SECUREEDGE5410) := snapgear diff --git a/arch/sh/boards/bigsur/Makefile b/arch/sh/boards/bigsur/Makefile deleted file mode 100644 index 0ff9497ac58e..000000000000 --- a/arch/sh/boards/bigsur/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# -# Makefile for the BigSur specific parts of the kernel -# - -obj-y := setup.o io.o irq.o led.o - diff --git a/arch/sh/boards/bigsur/io.c b/arch/sh/boards/bigsur/io.c deleted file mode 100644 index 23071f97eec3..000000000000 --- a/arch/sh/boards/bigsur/io.c +++ /dev/null @@ -1,120 +0,0 @@ -/* - * arch/sh/boards/bigsur/io.c - * - * By Dustin McIntire (dustin@sensoria.com) (c)2001 - * Derived from io_hd64465.h, which bore the message: - * By Greg Banks - * (c) 2000 PocketPenguins Inc. - * and from io_hd64461.h, which bore the message: - * Copyright 2000 Stuart Menefy (stuart.menefy@st.com) - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * IO functions for a Hitachi Big Sur Evaluation Board. - */ - -#include -#include -#include -#include -#include - -/* Low iomap maps port 0-1K to addresses in 8byte chunks */ -#define BIGSUR_IOMAP_LO_THRESH 0x400 -#define BIGSUR_IOMAP_LO_SHIFT 3 -#define BIGSUR_IOMAP_LO_MASK ((1<>BIGSUR_IOMAP_LO_SHIFT) -static u32 bigsur_iomap_lo[BIGSUR_IOMAP_LO_NMAP]; -static u8 bigsur_iomap_lo_shift[BIGSUR_IOMAP_LO_NMAP]; - -/* High iomap maps port 1K-64K to addresses in 1K chunks */ -#define BIGSUR_IOMAP_HI_THRESH 0x10000 -#define BIGSUR_IOMAP_HI_SHIFT 10 -#define BIGSUR_IOMAP_HI_MASK ((1<>BIGSUR_IOMAP_HI_SHIFT) -static u32 bigsur_iomap_hi[BIGSUR_IOMAP_HI_NMAP]; -static u8 bigsur_iomap_hi_shift[BIGSUR_IOMAP_HI_NMAP]; - -void bigsur_port_map(u32 baseport, u32 nports, u32 addr, u8 shift) -{ - u32 port, endport = baseport + nports; - - pr_debug("bigsur_port_map(base=0x%0x, n=0x%0x, addr=0x%08x)\n", - baseport, nports, addr); - - for (port = baseport ; - port < endport && port < BIGSUR_IOMAP_LO_THRESH ; - port += (1<>BIGSUR_IOMAP_LO_SHIFT] = addr; - bigsur_iomap_lo_shift[port>>BIGSUR_IOMAP_LO_SHIFT] = shift; - addr += (1<<(BIGSUR_IOMAP_LO_SHIFT)); - } - - for (port = max_t(u32, baseport, BIGSUR_IOMAP_LO_THRESH); - port < endport && port < BIGSUR_IOMAP_HI_THRESH ; - port += (1<>BIGSUR_IOMAP_HI_SHIFT] = addr; - bigsur_iomap_hi_shift[port>>BIGSUR_IOMAP_HI_SHIFT] = shift; - addr += (1<<(BIGSUR_IOMAP_HI_SHIFT)); - } -} -EXPORT_SYMBOL(bigsur_port_map); - -void bigsur_port_unmap(u32 baseport, u32 nports) -{ - u32 port, endport = baseport + nports; - - pr_debug("bigsur_port_unmap(base=0x%0x, n=0x%0x)\n", baseport, nports); - - for (port = baseport ; - port < endport && port < BIGSUR_IOMAP_LO_THRESH ; - port += (1<>BIGSUR_IOMAP_LO_SHIFT] = 0; - } - - for (port = max_t(u32, baseport, BIGSUR_IOMAP_LO_THRESH); - port < endport && port < BIGSUR_IOMAP_HI_THRESH ; - port += (1<>BIGSUR_IOMAP_HI_SHIFT] = 0; - } -} -EXPORT_SYMBOL(bigsur_port_unmap); - -unsigned long bigsur_isa_port2addr(unsigned long port) -{ - unsigned long addr = 0; - unsigned char shift; - - /* Physical address not in P0, do nothing */ - if (PXSEG(port)) { - addr = port; - /* physical address in P0, map to P2 */ - } else if (port >= 0x30000) { - addr = P2SEGADDR(port); - /* Big Sur I/O + HD64465 registers 0x10000-0x30000 */ - } else if (port >= BIGSUR_IOMAP_HI_THRESH) { - addr = BIGSUR_INTERNAL_BASE + (port - BIGSUR_IOMAP_HI_THRESH); - /* Handle remapping of high IO/PCI IO ports */ - } else if (port >= BIGSUR_IOMAP_LO_THRESH) { - addr = bigsur_iomap_hi[port >> BIGSUR_IOMAP_HI_SHIFT]; - shift = bigsur_iomap_hi_shift[port >> BIGSUR_IOMAP_HI_SHIFT]; - - if (addr != 0) - addr += (port & BIGSUR_IOMAP_HI_MASK) << shift; - } else { - /* Handle remapping of low IO ports */ - addr = bigsur_iomap_lo[port >> BIGSUR_IOMAP_LO_SHIFT]; - shift = bigsur_iomap_lo_shift[port >> BIGSUR_IOMAP_LO_SHIFT]; - - if (addr != 0) - addr += (port & BIGSUR_IOMAP_LO_MASK) << shift; - } - - pr_debug("%s(0x%08lx) = 0x%08lx\n", __FUNCTION__, port, addr); - - return addr; -} - diff --git a/arch/sh/boards/bigsur/irq.c b/arch/sh/boards/bigsur/irq.c deleted file mode 100644 index 1ab04da36382..000000000000 --- a/arch/sh/boards/bigsur/irq.c +++ /dev/null @@ -1,334 +0,0 @@ -/* - * - * By Dustin McIntire (dustin@sensoria.com) (c)2001 - * - * Setup and IRQ handling code for the HD64465 companion chip. - * by Greg Banks - * Copyright (c) 2000 PocketPenguins Inc - * - * Derived from setup_hd64465.c which bore the message: - * Greg Banks - * Copyright (c) 2000 PocketPenguins Inc and - * Copyright (C) 2000 YAEGASHI Takeshi - * and setup_cqreek.c which bore message: - * Copyright (C) 2000 Niibe Yutaka - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * IRQ functions for a Hitachi Big Sur Evaluation Board. - * - */ -#undef DEBUG - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include -#include -#include - -//#define BIGSUR_DEBUG 3 -#undef BIGSUR_DEBUG - -#ifdef BIGSUR_DEBUG -#define DIPRINTK(n, args...) if (BIGSUR_DEBUG>(n)) printk(args) -#else -#define DIPRINTK(n, args...) -#endif /* BIGSUR_DEBUG */ - -#ifdef CONFIG_HD64465 -extern int hd64465_irq_demux(int irq); -#endif /* CONFIG_HD64465 */ - - -/*===========================================================*/ -// Big Sur CPLD IRQ Routines -/*===========================================================*/ - -/* Level 1 IRQ routines */ -static void disable_bigsur_l1irq(unsigned int irq) -{ - unsigned char mask; - unsigned int mask_port = ((irq - BIGSUR_IRQ_LOW)/8) ? BIGSUR_IRLMR1 : BIGSUR_IRLMR0; - unsigned char bit = (1 << ((irq - MGATE_IRQ_LOW)%8) ); - - if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) { - pr_debug("Disable L1 IRQ %d\n", irq); - DIPRINTK(2,"disable_bigsur_l1irq: IMR=0x%08x mask=0x%x\n", - mask_port, bit); - - /* Disable IRQ - set mask bit */ - mask = inb(mask_port) | bit; - outb(mask, mask_port); - return; - } - pr_debug("disable_bigsur_l1irq: Invalid IRQ %d\n", irq); -} - -static void enable_bigsur_l1irq(unsigned int irq) -{ - unsigned char mask; - unsigned int mask_port = ((irq - BIGSUR_IRQ_LOW)/8) ? BIGSUR_IRLMR1 : BIGSUR_IRLMR0; - unsigned char bit = (1 << ((irq - MGATE_IRQ_LOW)%8) ); - - if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) { - pr_debug("Enable L1 IRQ %d\n", irq); - DIPRINTK(2,"enable_bigsur_l1irq: IMR=0x%08x mask=0x%x\n", - mask_port, bit); - /* Enable L1 IRQ - clear mask bit */ - mask = inb(mask_port) & ~bit; - outb(mask, mask_port); - return; - } - pr_debug("enable_bigsur_l1irq: Invalid IRQ %d\n", irq); -} - - -/* Level 2 irq masks and registers for L2 decoding */ -/* Level2 bitmasks for each level 1 IRQ */ -const u32 bigsur_l2irq_mask[] = - {0x40,0x80,0x08,0x01,0x01,0x3C,0x3E,0xFF,0x40,0x80,0x06,0x03}; -/* Level2 to ISR[n] map for each level 1 IRQ */ -const u32 bigsur_l2irq_reg[] = - { 2, 2, 3, 3, 1, 2, 1, 0, 1, 1, 3, 2}; -/* Level2 to Level 1 IRQ map */ -const u32 bigsur_l2_l1_map[] = - {7,7,7,7,7,7,7,7, 4,6,6,6,6,6,8,9, 11,11,5,5,5,5,0,1, 3,10,10,2,-1,-1,-1,-1}; -/* IRQ inactive level (high or low) */ -const u32 bigsur_l2_inactv_state[] = {0x00, 0xBE, 0xFC, 0xF7}; - -/* CPLD external status and mask registers base and offsets */ -static const u32 isr_base = BIGSUR_IRQ0; -static const u32 isr_offset = BIGSUR_IRQ0 - BIGSUR_IRQ1; -static const u32 imr_base = BIGSUR_IMR0; -static const u32 imr_offset = BIGSUR_IMR0 - BIGSUR_IMR1; - -#define REG_NUM(irq) ((irq-BIGSUR_2NDLVL_IRQ_LOW)/8 ) - -/* Level 2 IRQ routines */ -static void disable_bigsur_l2irq(unsigned int irq) -{ - unsigned char mask; - unsigned char bit = 1 << ((irq-BIGSUR_2NDLVL_IRQ_LOW)%8); - unsigned int mask_port = imr_base - REG_NUM(irq)*imr_offset; - - if(irq >= BIGSUR_2NDLVL_IRQ_LOW && irq < BIGSUR_2NDLVL_IRQ_HIGH) { - pr_debug("Disable L2 IRQ %d\n", irq); - DIPRINTK(2,"disable_bigsur_l2irq: IMR=0x%08x mask=0x%x\n", - mask_port, bit); - - /* Disable L2 IRQ - set mask bit */ - mask = inb(mask_port) | bit; - outb(mask, mask_port); - return; - } - pr_debug("disable_bigsur_l2irq: Invalid IRQ %d\n", irq); -} - -static void enable_bigsur_l2irq(unsigned int irq) -{ - unsigned char mask; - unsigned char bit = 1 << ((irq-BIGSUR_2NDLVL_IRQ_LOW)%8); - unsigned int mask_port = imr_base - REG_NUM(irq)*imr_offset; - - if(irq >= BIGSUR_2NDLVL_IRQ_LOW && irq < BIGSUR_2NDLVL_IRQ_HIGH) { - pr_debug("Enable L2 IRQ %d\n", irq); - DIPRINTK(2,"enable_bigsur_l2irq: IMR=0x%08x mask=0x%x\n", - mask_port, bit); - - /* Enable L2 IRQ - clear mask bit */ - mask = inb(mask_port) & ~bit; - outb(mask, mask_port); - return; - } - pr_debug("enable_bigsur_l2irq: Invalid IRQ %d\n", irq); -} - -static void mask_and_ack_bigsur(unsigned int irq) -{ - pr_debug("mask_and_ack_bigsur IRQ %d\n", irq); - if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) - disable_bigsur_l1irq(irq); - else - disable_bigsur_l2irq(irq); -} - -static void end_bigsur_irq(unsigned int irq) -{ - pr_debug("end_bigsur_irq IRQ %d\n", irq); - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) { - if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) - enable_bigsur_l1irq(irq); - else - enable_bigsur_l2irq(irq); - } -} - -static unsigned int startup_bigsur_irq(unsigned int irq) -{ - u8 mask; - u32 reg; - - pr_debug("startup_bigsur_irq IRQ %d\n", irq); - - if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) { - /* Enable the L1 IRQ */ - enable_bigsur_l1irq(irq); - /* Enable all L2 IRQs in this L1 IRQ */ - mask = ~(bigsur_l2irq_mask[irq-BIGSUR_IRQ_LOW]); - reg = imr_base - bigsur_l2irq_reg[irq-BIGSUR_IRQ_LOW] * imr_offset; - mask &= inb(reg); - outb(mask,reg); - DIPRINTK(2,"startup_bigsur_irq: IMR=0x%08x mask=0x%x\n",reg,inb(reg)); - } - else { - /* Enable the L2 IRQ - clear mask bit */ - enable_bigsur_l2irq(irq); - /* Enable the L1 bit masking this L2 IRQ */ - enable_bigsur_l1irq(bigsur_l2_l1_map[irq-BIGSUR_2NDLVL_IRQ_LOW]); - DIPRINTK(2,"startup_bigsur_irq: L1=%d L2=%d\n", - bigsur_l2_l1_map[irq-BIGSUR_2NDLVL_IRQ_LOW],irq); - } - return 0; -} - -static void shutdown_bigsur_irq(unsigned int irq) -{ - pr_debug("shutdown_bigsur_irq IRQ %d\n", irq); - if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) - disable_bigsur_l1irq(irq); - else - disable_bigsur_l2irq(irq); -} - -/* Define the IRQ structures for the L1 and L2 IRQ types */ -static struct hw_interrupt_type bigsur_l1irq_type = { - .typename = "BigSur-CPLD-Level1-IRQ", - .startup = startup_bigsur_irq, - .shutdown = shutdown_bigsur_irq, - .enable = enable_bigsur_l1irq, - .disable = disable_bigsur_l1irq, - .ack = mask_and_ack_bigsur, - .end = end_bigsur_irq -}; - -static struct hw_interrupt_type bigsur_l2irq_type = { - .typename = "BigSur-CPLD-Level2-IRQ", - .startup = startup_bigsur_irq, - .shutdown =shutdown_bigsur_irq, - .enable = enable_bigsur_l2irq, - .disable = disable_bigsur_l2irq, - .ack = mask_and_ack_bigsur, - .end = end_bigsur_irq -}; - - -static void make_bigsur_l1isr(unsigned int irq) { - - /* sanity check first */ - if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) { - /* save the handler in the main description table */ - irq_desc[irq].chip = &bigsur_l1irq_type; - irq_desc[irq].status = IRQ_DISABLED; - irq_desc[irq].action = 0; - irq_desc[irq].depth = 1; - - disable_bigsur_l1irq(irq); - return; - } - pr_debug("make_bigsur_l1isr: bad irq, %d\n", irq); - return; -} - -static void make_bigsur_l2isr(unsigned int irq) { - - /* sanity check first */ - if(irq >= BIGSUR_2NDLVL_IRQ_LOW && irq < BIGSUR_2NDLVL_IRQ_HIGH) { - /* save the handler in the main description table */ - irq_desc[irq].chip = &bigsur_l2irq_type; - irq_desc[irq].status = IRQ_DISABLED; - irq_desc[irq].action = 0; - irq_desc[irq].depth = 1; - - disable_bigsur_l2irq(irq); - return; - } - pr_debug("make_bigsur_l2isr: bad irq, %d\n", irq); - return; -} - -/* The IRQ's will be decoded as follows: - * If a level 2 handler exists and there is an unmasked active - * IRQ, the 2nd level handler will be called. - * If a level 2 handler does not exist for the active IRQ - * the 1st level handler will be called. - */ - -int bigsur_irq_demux(int irq) -{ - int dmux_irq = irq; - u8 mask, actv_irqs; - u32 reg_num; - - DIPRINTK(3,"bigsur_irq_demux, irq=%d\n", irq); - /* decode the 1st level IRQ */ - if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) { - /* Get corresponding L2 ISR bitmask and ISR number */ - mask = bigsur_l2irq_mask[irq-BIGSUR_IRQ_LOW]; - reg_num = bigsur_l2irq_reg[irq-BIGSUR_IRQ_LOW]; - /* find the active IRQ's (XOR with inactive level)*/ - actv_irqs = inb(isr_base-reg_num*isr_offset) ^ - bigsur_l2_inactv_state[reg_num]; - /* decode active IRQ's */ - actv_irqs = actv_irqs & mask & ~(inb(imr_base-reg_num*imr_offset)); - /* if NEZ then we have an active L2 IRQ */ - if(actv_irqs) dmux_irq = ffz(~actv_irqs) + reg_num*8+BIGSUR_2NDLVL_IRQ_LOW; - /* if no 2nd level IRQ action, but has 1st level, use 1st level handler */ - if(!irq_desc[dmux_irq].action && irq_desc[irq].action) - dmux_irq = irq; - DIPRINTK(1,"bigsur_irq_demux: irq=%d dmux_irq=%d mask=0x%04x reg=%d\n", - irq, dmux_irq, mask, reg_num); - } -#ifdef CONFIG_HD64465 - dmux_irq = hd64465_irq_demux(dmux_irq); -#endif /* CONFIG_HD64465 */ - DIPRINTK(3,"bigsur_irq_demux, demux_irq=%d\n", dmux_irq); - - return dmux_irq; -} - -/*===========================================================*/ -// Big Sur Init Routines -/*===========================================================*/ -void __init init_bigsur_IRQ(void) -{ - int i; - - if (!MACH_BIGSUR) return; - - /* Create ISR's for Big Sur CPLD IRQ's */ - /*==============================================================*/ - for(i=BIGSUR_IRQ_LOW;i - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * This file contains Big Sur specific LED code. - */ - -#include -#include - -static void mach_led(int position, int value) -{ - int word; - - word = bigsur_inl(BIGSUR_CSLR); - if (value) { - bigsur_outl(word & ~BIGSUR_LED, BIGSUR_CSLR); - } else { - bigsur_outl(word | BIGSUR_LED, BIGSUR_CSLR); - } -} - -#ifdef CONFIG_HEARTBEAT - -#include - -/* Cycle the LED on/off */ -void heartbeat_bigsur(void) -{ - static unsigned cnt = 0, period = 0, dist = 0; - - if (cnt == 0 || cnt == dist) - mach_led( -1, 1); - else if (cnt == 7 || cnt == dist+7) - mach_led( -1, 0); - - if (++cnt > period) { - cnt = 0; - /* The hyperbolic function below modifies the heartbeat period - * length in dependency of the current (5min) load. It goes - * through the points f(0)=126, f(1)=86, f(5)=51, - * f(inf)->30. */ - period = ((672< - * Copyright (c) 2000 PocketPenguins Inc - * - * Derived from setup_hd64465.c which bore the message: - * Greg Banks - * Copyright (c) 2000 PocketPenguins Inc and - * Copyright (C) 2000 YAEGASHI Takeshi - * and setup_cqreek.c which bore message: - * Copyright (C) 2000 Niibe Yutaka - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * Setup functions for a Hitachi Big Sur Evaluation Board. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -/*===========================================================*/ -// Big Sur Init Routines -/*===========================================================*/ - -static void __init bigsur_setup(char **cmdline_p) -{ - /* Mask all 2nd level IRQ's */ - outb(-1,BIGSUR_IMR0); - outb(-1,BIGSUR_IMR1); - outb(-1,BIGSUR_IMR2); - outb(-1,BIGSUR_IMR3); - - /* Mask 1st level interrupts */ - outb(-1,BIGSUR_IRLMR0); - outb(-1,BIGSUR_IRLMR1); - -#if defined (CONFIG_HD64465) && defined (CONFIG_SERIAL) - /* remap IO ports for first ISA serial port to HD64465 UART */ - bigsur_port_map(0x3f8, 8, CONFIG_HD64465_IOBASE + 0x8000, 1); -#endif /* CONFIG_HD64465 && CONFIG_SERIAL */ - /* TODO: setup IDE registers */ - bigsur_port_map(BIGSUR_IDECTL_IOPORT, 2, BIGSUR_ICTL, 8); - /* Setup the Ethernet port to BIGSUR_ETHER_IOPORT */ - bigsur_port_map(BIGSUR_ETHER_IOPORT, 16, BIGSUR_ETHR+BIGSUR_ETHER_IOPORT, 0); - /* set page to 1 */ - outw(1, BIGSUR_ETHR+0xe); - /* set the IO port to BIGSUR_ETHER_IOPORT */ - outw(BIGSUR_ETHER_IOPORT<<3, BIGSUR_ETHR+0x2); -} - -/* - * The Machine Vector - */ -extern void heartbeat_bigsur(void); -extern void init_bigsur_IRQ(void); - -struct sh_machine_vector mv_bigsur __initmv = { - .mv_name = "Big Sur", - .mv_setup = bigsur_setup, - - .mv_isa_port2addr = bigsur_isa_port2addr, - .mv_irq_demux = bigsur_irq_demux, - - .mv_init_irq = init_bigsur_IRQ, -#ifdef CONFIG_HEARTBEAT - .mv_heartbeat = heartbeat_bigsur, -#endif -}; -ALIAS_MV(bigsur) diff --git a/arch/sh/boards/ec3104/Makefile b/arch/sh/boards/ec3104/Makefile deleted file mode 100644 index 178891534b67..000000000000 --- a/arch/sh/boards/ec3104/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# -# Makefile for the EC3104 specific parts of the kernel -# - -obj-y := setup.o io.o irq.o - diff --git a/arch/sh/boards/ec3104/io.c b/arch/sh/boards/ec3104/io.c deleted file mode 100644 index 2f86394b280b..000000000000 --- a/arch/sh/boards/ec3104/io.c +++ /dev/null @@ -1,81 +0,0 @@ -/* - * linux/arch/sh/boards/ec3104/io.c - * EC3104 companion chip support - * - * Copyright (C) 2000 Philipp Rumpf - * - */ -/* EC3104 note: - * This code was written without any documentation about the EC3104 chip. While - * I hope I got most of the basic functionality right, the register names I use - * are most likely completely different from those in the chip documentation. - * - * If you have any further information about the EC3104, please tell me - * (prumpf@tux.org). - */ - -#include -#include -#include -#include -#include - -/* - * EC3104 has a real ISA bus which we redirect low port accesses to (the - * actual device on mine is a ESS 1868, and I don't want to hack the driver - * more than strictly necessary). I am not going to duplicate the - * hard coding of PC addresses (for the 16550s aso) here though; it's just - * too ugly. - */ - -#define low_port(port) ((port) < 0x10000) - -static inline unsigned long port2addr(unsigned long port) -{ - switch(port >> 16) { - case 0: - return EC3104_ISA_BASE + port * 2; - - /* XXX hack. it's unclear what to do about the serial ports */ - case 1: - return EC3104_BASE + (port&0xffff) * 4; - - default: - /* XXX PCMCIA */ - return 0; - } -} - -unsigned char ec3104_inb(unsigned long port) -{ - u8 ret; - - ret = *(volatile u8 *)port2addr(port); - - return ret; -} - -unsigned short ec3104_inw(unsigned long port) -{ - BUG(); -} - -unsigned long ec3104_inl(unsigned long port) -{ - BUG(); -} - -void ec3104_outb(unsigned char data, unsigned long port) -{ - *(volatile u8 *)port2addr(port) = data; -} - -void ec3104_outw(unsigned short data, unsigned long port) -{ - BUG(); -} - -void ec3104_outl(unsigned long data, unsigned long port) -{ - BUG(); -} diff --git a/arch/sh/boards/ec3104/irq.c b/arch/sh/boards/ec3104/irq.c deleted file mode 100644 index ffa4ff1f090f..000000000000 --- a/arch/sh/boards/ec3104/irq.c +++ /dev/null @@ -1,196 +0,0 @@ -/* - * linux/arch/sh/boards/ec3104/irq.c - * EC3104 companion chip support - * - * Copyright (C) 2000 Philipp Rumpf - * - */ - -#include -#include -#include - -/* This is for debugging mostly; here's the table that I intend to keep - * in here: - * - * index function base addr power interrupt bit - * 0 power b0ec0000 --- 00000001 (unused) - * 1 irqs b0ec1000 --- 00000002 (unused) - * 2 ?? b0ec2000 b0ec0008 00000004 - * 3 PS2 (1) b0ec3000 b0ec000c 00000008 - * 4 PS2 (2) b0ec4000 b0ec0010 00000010 - * 5 ?? b0ec5000 b0ec0014 00000020 - * 6 I2C b0ec6000 b0ec0018 00000040 - * 7 serial (1) b0ec7000 b0ec001c 00000080 - * 8 serial (2) b0ec8000 b0ec0020 00000100 - * 9 serial (3) b0ec9000 b0ec0024 00000200 - * 10 serial (4) b0eca000 b0ec0028 00000400 - * 12 GPIO (1) b0ecc000 b0ec0030 - * 13 GPIO (2) b0ecc000 b0ec0030 - * 16 pcmcia (1) b0ed0000 b0ec0040 00010000 - * 17 pcmcia (2) b0ed1000 b0ec0044 00020000 - */ - -/* I used the register names from another interrupt controller I worked with, - * since it seems to be identical to the ec3104 except that all bits are - * inverted: - * - * IRR: Interrupt Request Register (pending and enabled interrupts) - * IMR: Interrupt Mask Register (which interrupts are enabled) - * IPR: Interrupt Pending Register (pending interrupts, even disabled ones) - * - * 0 bits mean pending or enabled, 1 bits mean not pending or disabled. all - * IRQs seem to be level-triggered. - */ - -#define EC3104_IRR (EC3104_BASE + 0x1000) -#define EC3104_IMR (EC3104_BASE + 0x1004) -#define EC3104_IPR (EC3104_BASE + 0x1008) - -#define ctrl_readl(addr) (*(volatile u32 *)(addr)) -#define ctrl_writel(data,addr) (*(volatile u32 *)(addr) = (data)) -#define ctrl_readb(addr) (*(volatile u8 *)(addr)) - -static char *ec3104_name(unsigned index) -{ - switch(index) { - case 0: - return "power management"; - case 1: - return "interrupts"; - case 3: - return "PS2 (1)"; - case 4: - return "PS2 (2)"; - case 5: - return "I2C (1)"; - case 6: - return "I2C (2)"; - case 7: - return "serial (1)"; - case 8: - return "serial (2)"; - case 9: - return "serial (3)"; - case 10: - return "serial (4)"; - case 16: - return "pcmcia (1)"; - case 17: - return "pcmcia (2)"; - default: { - static char buf[32]; - - sprintf(buf, "unknown (%d)", index); - - return buf; - } - } -} - -int get_pending_interrupts(char *buf) -{ - u32 ipr; - u32 bit; - char *p = buf; - - p += sprintf(p, "pending: ("); - - ipr = ctrl_inl(EC3104_IPR); - - for (bit = 1; bit < 32; bit++) - if (!(ipr & (1< - * - */ -/* EC3104 note: - * This code was written without any documentation about the EC3104 chip. While - * I hope I got most of the basic functionality right, the register names I use - * are most likely completely different from those in the chip documentation. - * - * If you have any further information about the EC3104, please tell me - * (prumpf@tux.org). - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -static void __init ec3104_setup(char **cmdline_p) -{ - char str[8]; - int i; - - for (i=0; i<8; i++) - str[i] = ctrl_readb(EC3104_BASE + i); - - for (i = EC3104_IRQBASE; i < EC3104_IRQBASE + 32; i++) - irq_desc[i].handler = &ec3104_int; - - printk("initializing EC3104 \"%.8s\" at %08x, IRQ %d, IRQ base %d\n", - str, EC3104_BASE, EC3104_IRQ, EC3104_IRQBASE); - - /* mask all interrupts. this should have been done by the boot - * loader for us but we want to be sure ... */ - ctrl_writel(0xffffffff, EC3104_IMR); -} - -/* - * The Machine Vector - */ -struct sh_machine_vector mv_ec3104 __initmv = { - .mv_name = "EC3104", - .mv_setup = ec3104_setup, - .mv_nr_irqs = 96, - - .mv_inb = ec3104_inb, - .mv_inw = ec3104_inw, - .mv_inl = ec3104_inl, - .mv_outb = ec3104_outb, - .mv_outw = ec3104_outw, - .mv_outl = ec3104_outl, - - .mv_irq_demux = ec3104_irq_demux, -}; -ALIAS_MV(ec3104) diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile index 9e00cb8a39e9..cc8d0d0b1427 100644 --- a/arch/sh/drivers/pci/Makefile +++ b/arch/sh/drivers/pci/Makefile @@ -12,7 +12,6 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7780) += pci-sh7780.o ops-sh4.o obj-$(CONFIG_SH_DREAMCAST) += ops-dreamcast.o fixups-dreamcast.o \ dma-dreamcast.o obj-$(CONFIG_SH_SECUREEDGE5410) += ops-snapgear.o -obj-$(CONFIG_SH_BIGSUR) += ops-bigsur.o obj-$(CONFIG_SH_RTS7751R2D) += ops-rts7751r2d.o fixups-rts7751r2d.o obj-$(CONFIG_SH_SH03) += ops-sh03.o fixups-sh03.o obj-$(CONFIG_SH_R7780RP) += ops-r7780rp.o fixups-r7780rp.o diff --git a/arch/sh/drivers/pci/ops-bigsur.c b/arch/sh/drivers/pci/ops-bigsur.c deleted file mode 100644 index eb31be751524..000000000000 --- a/arch/sh/drivers/pci/ops-bigsur.c +++ /dev/null @@ -1,83 +0,0 @@ -/* - * linux/arch/sh/drivers/pci/ops-bigsur.c - * - * By Dustin McIntire (dustin@sensoria.com) (c)2001 - * - * Ported to new API by Paul Mundt . - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * PCI initialization for the Hitachi Big Sur Evaluation Board - */ -#include -#include -#include -#include -#include -#include "pci-sh4.h" -#include - -#define BIGSUR_PCI_IO 0x4000 -#define BIGSUR_PCI_MEM 0xfd000000 - -static struct resource sh7751_io_resource = { - .name = "SH7751 IO", - .start = BIGSUR_PCI_IO, - .end = BIGSUR_PCI_IO + (64*1024) - 1, - .flags = IORESOURCE_IO, -}; - -static struct resource sh7751_mem_resource = { - .name = "SH7751 mem", - .start = BIGSUR_PCI_MEM, - .end = BIGSUR_PCI_MEM + (64*1024*1024) - 1, - .flags = IORESOURCE_MEM, -}; - -extern struct pci_ops sh7751_pci_ops; - -struct pci_channel board_pci_channels[] = { - { &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, - { 0, } -}; - -static struct sh4_pci_address_map sh7751_pci_map = { - .window0 = { - .base = SH7751_CS3_BASE_ADDR, - .size = BIGSUR_LSR0_SIZE, - }, - - .window1 = { - .base = SH7751_CS3_BASE_ADDR, - .size = BIGSUR_LSR1_SIZE, - }, -}; - -/* - * Initialize the Big Sur PCI interface - * Setup hardware to be Central Funtion - * Copy the BSR regs to the PCI interface - * Setup PCI windows into local RAM - */ -int __init pcibios_init_platform(void) -{ - return sh7751_pcic_init(&sh7751_pci_map); -} - -int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) -{ - /* - * The Big Sur can be used in a CPCI chassis, but the SH7751 PCI - * interface is on the wrong end of the board so that it can also - * support a V320 CPI interface chip... Therefor the IRQ mapping is - * somewhat use dependent... I'l assume a linear map for now, i.e. - * INTA=slot0,pin0... INTD=slot3,pin0... - */ - int irq = (slot + pin-1) % 4 + BIGSUR_SH7751_PCI_IRQ_BASE; - - PCIDBG(2, "PCI: Mapping Big Sur IRQ for slot %d, pin %c to irq %d\n", - slot, pin-1+'A', irq); - - return irq; -} diff --git a/arch/sh/drivers/pci/pci-sh7751.c b/arch/sh/drivers/pci/pci-sh7751.c index 85e1ee2e2e7b..9ddff760d3c6 100644 --- a/arch/sh/drivers/pci/pci-sh7751.c +++ b/arch/sh/drivers/pci/pci-sh7751.c @@ -157,15 +157,6 @@ int __init sh7751_pcic_init(struct sh4_pci_address_map *map) PCIBIOS_MIN_IO, (64 << 10), SH7751_PCI_IO_BASE + PCIBIOS_MIN_IO); - /* - * XXX: For now, leave this board-specific. In the event we have other - * boards that need to do similar work, this can be wrapped. - */ -#ifdef CONFIG_SH_BIGSUR - bigsur_port_map(PCIBIOS_MIN_IO, (64 << 10), - SH7751_PCI_IO_BASE + PCIBIOS_MIN_IO, 0); -#endif - /* Make sure the MSB's of IO window are set to access PCI space * correctly */ word = PCIBIOS_MIN_IO & SH4_PCIIOBR_MASK; diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types index 0571755e9a84..4fe0f94cbf42 100644 --- a/arch/sh/tools/mach-types +++ b/arch/sh/tools/mach-types @@ -16,7 +16,6 @@ HD64461 HD64461 HD64465 HD64465 SATURN SH_SATURN DREAMCAST SH_DREAMCAST -BIGSUR SH_BIGSUR MPC1211 SH_MPC1211 SNAPGEAR SH_SECUREEDGE5410 HS7751RVOIP SH_HS7751RVOIP -- cgit v1.2.3 From 38515e908ba3a9c467ad3bf347b9bce69216df94 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 14 Feb 2007 00:33:16 -0800 Subject: [PATCH] Scheduled removal of SA_xxx interrupt flags fixups The obsolete SA_xxx interrupt flags have been used despite the scheduled removal. Fixup the remaining users. Signed-off-by: Thomas Gleixner Acked-by: Ingo Molnar Cc: "Luck, Tony" Cc: Roman Zippel Cc: Geert Uytterhoeven Cc: Jeff Garzik Cc: Wim Van Sebroeck Cc: Roland Dreier Cc: Alessandro Zummo Cc: James Bottomley Cc: Greg KH Cc: Dave Airlie Cc: James Simmons Cc: "Antonino A. Daplas" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ia64/kernel/irq_ia64.c | 2 +- arch/m68k/atari/stdma.c | 2 +- arch/ppc/syslib/i8259.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/irq_ia64.c b/arch/ia64/kernel/irq_ia64.c index ba3ba8bc50be..456f57b087ca 100644 --- a/arch/ia64/kernel/irq_ia64.c +++ b/arch/ia64/kernel/irq_ia64.c @@ -275,7 +275,7 @@ static struct irqaction ipi_irqaction = { static struct irqaction resched_irqaction = { .handler = dummy_handler, - .flags = SA_INTERRUPT, + .flags = IRQF_DISABLED, .name = "resched" }; #endif diff --git a/arch/m68k/atari/stdma.c b/arch/m68k/atari/stdma.c index d01deb46ebbc..ab3fd5202b24 100644 --- a/arch/m68k/atari/stdma.c +++ b/arch/m68k/atari/stdma.c @@ -174,7 +174,7 @@ int stdma_islocked(void) void __init stdma_init(void) { stdma_isr = NULL; - request_irq(IRQ_MFP_FDC, stdma_int, IRQ_TYPE_SLOW | SA_SHIRQ, + request_irq(IRQ_MFP_FDC, stdma_int, IRQ_TYPE_SLOW | IRQF_SHARED, "ST-DMA: floppy/ACSI/IDE/Falcon-SCSI", stdma_int); } diff --git a/arch/ppc/syslib/i8259.c b/arch/ppc/syslib/i8259.c index a43dda5a8334..1e5a00a4b5f5 100644 --- a/arch/ppc/syslib/i8259.c +++ b/arch/ppc/syslib/i8259.c @@ -154,7 +154,7 @@ static struct resource pic_edgectrl_iores = { static struct irqaction i8259_irqaction = { .handler = no_action, - .flags = SA_INTERRUPT, + .flags = IRQF_DISABLED, .mask = CPU_MASK_NONE, .name = "82c59 secondary cascade", }; -- cgit v1.2.3 From 462591b8868a18e52494e223d1a8f13311f50104 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Wed, 14 Feb 2007 00:33:36 -0800 Subject: [PATCH] sysctl: move CTL_PM into sysctl.h where it belongs Signed-off-by: Eric W. Biederman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/frv/kernel/pm.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/frv/kernel/pm.c b/arch/frv/kernel/pm.c index ee677ced7b68..6b764666ad29 100644 --- a/arch/frv/kernel/pm.c +++ b/arch/frv/kernel/pm.c @@ -125,7 +125,6 @@ unsigned long sleep_phys_sp(void *sp) * Use a temporary sysctl number. Horrid, but will be cleaned up in 2.6 * when all the PM interfaces exist nicely. */ -#define CTL_PM 9899 #define CTL_PM_SUSPEND 1 #define CTL_PM_CMODE 2 #define CTL_PM_P0 4 -- cgit v1.2.3 From febe1c257901c766a938007ed3710e7d54618756 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Wed, 14 Feb 2007 00:33:37 -0800 Subject: [PATCH] sysctl: frv: pm remove unnecessary insert_at_head flag With unique binary numbers setting insert_at_head to insert yourself at the head of sysctl list and thus override existing sysctl entries serves no point. Signed-off-by: Eric W. Biederman Acked-by: David Howells Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/frv/kernel/pm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/frv/kernel/pm.c b/arch/frv/kernel/pm.c index 6b764666ad29..c1840d6b0933 100644 --- a/arch/frv/kernel/pm.c +++ b/arch/frv/kernel/pm.c @@ -419,7 +419,7 @@ static struct ctl_table pm_dir_table[] = */ static int __init pm_init(void) { - register_sysctl_table(pm_dir_table, 1); + register_sysctl_table(pm_dir_table, 0); return 0; } -- cgit v1.2.3 From 77f6dfb1295cae6e4cbbb90fc6da88fdf27ee95e Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Wed, 14 Feb 2007 00:33:37 -0800 Subject: [PATCH] sysctl: move CTL_FRV into sysctl.h where it belongs Signed-off-by: Eric W. Biederman Acked-by: David Howells Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/frv/kernel/sysctl.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/frv/kernel/sysctl.c b/arch/frv/kernel/sysctl.c index ce676803eb6f..2f4da32fba20 100644 --- a/arch/frv/kernel/sysctl.c +++ b/arch/frv/kernel/sysctl.c @@ -186,7 +186,6 @@ static struct ctl_table frv_table[] = * Use a temporary sysctl number. Horrid, but will be cleaned up in 2.6 * when all the PM interfaces exist nicely. */ -#define CTL_FRV 9898 static struct ctl_table frv_dir_table[] = { {CTL_FRV, "frv", NULL, 0, 0555, frv_table}, -- cgit v1.2.3 From c8d1a1ac160421fda233def89065149ba7b0a00a Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Wed, 14 Feb 2007 00:33:38 -0800 Subject: [PATCH] sysctl: frv: remove unnecessary insert_at_head flag Since the binary sysctl numbers are unique putting the registered sysctls at the head of the sysctl list where they can override existing sysctls serves no useful purpose. Signed-off-by: Eric W. Biederman Acked-by: David Howells Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/frv/kernel/sysctl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/frv/kernel/sysctl.c b/arch/frv/kernel/sysctl.c index 2f4da32fba20..37528ebef759 100644 --- a/arch/frv/kernel/sysctl.c +++ b/arch/frv/kernel/sysctl.c @@ -197,7 +197,7 @@ static struct ctl_table frv_dir_table[] = */ static int __init frv_sysctl_init(void) { - register_sysctl_table(frv_dir_table, 1); + register_sysctl_table(frv_dir_table, 0); return 0; } -- cgit v1.2.3 From dfd007a667982372bfb05583c17bf5d4124c3c50 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Wed, 14 Feb 2007 00:33:39 -0800 Subject: [PATCH] sysctl: C99 convert arch/frv/kernel/pm.c Signed-off-by: Eric W. Biederman Acked-by: David Howells Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/frv/kernel/pm.c | 50 +++++++++++++++++++++++++++++++++++++++++++------- 1 file changed, 43 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/frv/kernel/pm.c b/arch/frv/kernel/pm.c index c1840d6b0933..aa503338985f 100644 --- a/arch/frv/kernel/pm.c +++ b/arch/frv/kernel/pm.c @@ -401,17 +401,53 @@ static int cm_sysctl(ctl_table *table, int __user *name, int nlen, static struct ctl_table pm_table[] = { - {CTL_PM_SUSPEND, "suspend", NULL, 0, 0200, NULL, &sysctl_pm_do_suspend}, - {CTL_PM_CMODE, "cmode", &clock_cmode_current, sizeof(int), 0644, NULL, &cmode_procctl, &cmode_sysctl, NULL}, - {CTL_PM_P0, "p0", &clock_p0_current, sizeof(int), 0644, NULL, &p0_procctl, &p0_sysctl, NULL}, - {CTL_PM_CM, "cm", &clock_cm_current, sizeof(int), 0644, NULL, &cm_procctl, &cm_sysctl, NULL}, - {0} + { + .ctl_name = CTL_PM_SUSPEND, + .procname = "suspend", + .data = NULL, + .maxlen = 0, + .mode = 0200, + .proc_handler = &sysctl_pm_do_suspend, + }, + { + .ctl_name = CTL_PM_CMODE, + .procname = "cmode", + .data = &clock_cmode_current, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = &cmode_procctl, + .strategy = &cmode_sysctl, + }, + { + .ctl_name = CTL_PM_P0, + .procname = "p0", + .data = &clock_p0_current, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = &p0_procctl, + .strategy = &p0_sysctl, + }, + { + .ctl_name = CTL_PM_CM, + .procname = "cm", + .data = &clock_cm_current, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = &cm_procctl, + .strategy = &cm_sysctl, + }, + { .ctl_name = 0} }; static struct ctl_table pm_dir_table[] = { - {CTL_PM, "pm", NULL, 0, 0555, pm_table}, - {0} + { + .ctl_name = CTL_PM, + .procname = "pm", + .mode = 0555, + .child = pm_table, + }, + { .ctl_name = 0} }; /* -- cgit v1.2.3 From 317ed68c01cd936a3651c2eb63c47ef2a1ff54e5 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Wed, 14 Feb 2007 00:33:39 -0800 Subject: [PATCH] sysctl: C99 convert arch/frv/kernel/sysctl.c Signed-off-by: Eric W. Biederman Acked-by: David Howells Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/frv/kernel/sysctl.c | 29 ++++++++++++++++++++++++----- 1 file changed, 24 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/frv/kernel/sysctl.c b/arch/frv/kernel/sysctl.c index 37528ebef759..577ad16cf840 100644 --- a/arch/frv/kernel/sysctl.c +++ b/arch/frv/kernel/sysctl.c @@ -175,11 +175,25 @@ static int procctl_frv_pin_cxnr(ctl_table *table, int write, struct file *filp, */ static struct ctl_table frv_table[] = { - { 1, "cache-mode", NULL, 0, 0644, NULL, &procctl_frv_cachemode }, + { + .ctl_name = 1, + .procname = "cache-mode", + .data = NULL, + .maxlen = 0, + .mode = 0644, + .proc_handler = &procctl_frv_cachemode, + }, #ifdef CONFIG_MMU - { 2, "pin-cxnr", NULL, 0, 0644, NULL, &procctl_frv_pin_cxnr }, + { + .ctl_name = 2, + .procname = "pin-cxnr", + .data = NULL, + .maxlen = 0, + .mode = 0644, + .proc_handler = &procctl_frv_pin_cxnr + }, #endif - { 0 } + {} }; /* @@ -188,8 +202,13 @@ static struct ctl_table frv_table[] = */ static struct ctl_table frv_dir_table[] = { - {CTL_FRV, "frv", NULL, 0, 0555, frv_table}, - {0} + { + .ctl_name = CTL_FRV, + .procname = "frv", + .mode = 0555, + .child = frv_table + }, + {} }; /* -- cgit v1.2.3 From 79eec3d3d928e8ea20160c941236f11ecca99071 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Wed, 14 Feb 2007 00:33:40 -0800 Subject: [PATCH] sysctl: sn: remove sysctl ABI BREAKAGE By not using the enumeration in sysctl.h (or even understanding it) the SN platform placed their arch specific xpc directory on top of CTL_KERN and only because they didn't have 4 entries in their xpc directory got lucky and didn't break glibc. This is totally irresponsible. So this patch entirely removes sys_sysctl support from their sysctl code. Hopefully they don't have ascii name conflicts as well. And now that they have no ABI numbers add them to the end instead of the sysctl list instead of the head so nothing else will be overridden. Cc: Tony Luck Signed-off-by: Eric W. Biederman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ia64/sn/kernel/xpc_main.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/ia64/sn/kernel/xpc_main.c b/arch/ia64/sn/kernel/xpc_main.c index 7a387d237363..24adb7566e8b 100644 --- a/arch/ia64/sn/kernel/xpc_main.c +++ b/arch/ia64/sn/kernel/xpc_main.c @@ -101,7 +101,7 @@ static int xpc_disengage_request_max_timelimit = 120; static ctl_table xpc_sys_xpc_hb_dir[] = { { - 1, + CTL_UNNUMBERED, "hb_interval", &xpc_hb_interval, sizeof(int), @@ -114,7 +114,7 @@ static ctl_table xpc_sys_xpc_hb_dir[] = { &xpc_hb_max_interval }, { - 2, + CTL_UNNUMBERED, "hb_check_interval", &xpc_hb_check_interval, sizeof(int), @@ -130,7 +130,7 @@ static ctl_table xpc_sys_xpc_hb_dir[] = { }; static ctl_table xpc_sys_xpc_dir[] = { { - 1, + CTL_UNNUMBERED, "hb", NULL, 0, @@ -138,7 +138,7 @@ static ctl_table xpc_sys_xpc_dir[] = { xpc_sys_xpc_hb_dir }, { - 2, + CTL_UNNUMBERED, "disengage_request_timelimit", &xpc_disengage_request_timelimit, sizeof(int), @@ -154,7 +154,7 @@ static ctl_table xpc_sys_xpc_dir[] = { }; static ctl_table xpc_sys_dir[] = { { - 1, + CTL_UNNUMBERED, "xpc", NULL, 0, @@ -1251,7 +1251,7 @@ xpc_init(void) snprintf(xpc_part->bus_id, BUS_ID_SIZE, "part"); snprintf(xpc_chan->bus_id, BUS_ID_SIZE, "chan"); - xpc_sysctl = register_sysctl_table(xpc_sys_dir, 1); + xpc_sysctl = register_sysctl_table(xpc_sys_dir, 0); /* * The first few fields of each entry of xpc_partitions[] need to -- cgit v1.2.3 From 68cbf0753681b3f79437f16d2f9a259b9346cf84 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Wed, 14 Feb 2007 00:33:41 -0800 Subject: [PATCH] sysctl: C99 Convert arch/ia64/sn/kernel/xpc_main.c Signed-off-by: Eric W. Biederman Cc: "Luck, Tony" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ia64/sn/kernel/xpc_main.c | 86 +++++++++++++++++++----------------------- 1 file changed, 38 insertions(+), 48 deletions(-) (limited to 'arch') diff --git a/arch/ia64/sn/kernel/xpc_main.c b/arch/ia64/sn/kernel/xpc_main.c index 24adb7566e8b..e04f7b5f2aab 100644 --- a/arch/ia64/sn/kernel/xpc_main.c +++ b/arch/ia64/sn/kernel/xpc_main.c @@ -101,67 +101,57 @@ static int xpc_disengage_request_max_timelimit = 120; static ctl_table xpc_sys_xpc_hb_dir[] = { { - CTL_UNNUMBERED, - "hb_interval", - &xpc_hb_interval, - sizeof(int), - 0644, - NULL, - &proc_dointvec_minmax, - &sysctl_intvec, - NULL, - &xpc_hb_min_interval, - &xpc_hb_max_interval + .ctl_name = CTL_UNNUMBERED, + .procname = "hb_interval", + .data = &xpc_hb_interval, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = &proc_dointvec_minmax, + .strategy = &sysctl_intvec, + .extra1 = &xpc_hb_min_interval, + .extra2 = &xpc_hb_max_interval }, { - CTL_UNNUMBERED, - "hb_check_interval", - &xpc_hb_check_interval, - sizeof(int), - 0644, - NULL, - &proc_dointvec_minmax, - &sysctl_intvec, - NULL, - &xpc_hb_check_min_interval, - &xpc_hb_check_max_interval + .ctl_name = CTL_UNNUMBERED, + .procname = "hb_check_interval", + .data = &xpc_hb_check_interval, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = &proc_dointvec_minmax, + .strategy = &sysctl_intvec, + .extra1 = &xpc_hb_check_min_interval, + .extra2 = &xpc_hb_check_max_interval }, - {0} + {} }; static ctl_table xpc_sys_xpc_dir[] = { { - CTL_UNNUMBERED, - "hb", - NULL, - 0, - 0555, - xpc_sys_xpc_hb_dir + .ctl_name = CTL_UNNUMBERED, + .procname = "hb", + .mode = 0555, + .child = xpc_sys_xpc_hb_dir }, { - CTL_UNNUMBERED, - "disengage_request_timelimit", - &xpc_disengage_request_timelimit, - sizeof(int), - 0644, - NULL, - &proc_dointvec_minmax, - &sysctl_intvec, - NULL, - &xpc_disengage_request_min_timelimit, - &xpc_disengage_request_max_timelimit + .ctl_name = CTL_UNNUMBERED, + .procname = "disengage_request_timelimit", + .data = &xpc_disengage_request_timelimit, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = &proc_dointvec_minmax, + .strategy = &sysctl_intvec, + .extra1 = &xpc_disengage_request_min_timelimit, + .extra2 = &xpc_disengage_request_max_timelimit }, - {0} + {} }; static ctl_table xpc_sys_dir[] = { { - CTL_UNNUMBERED, - "xpc", - NULL, - 0, - 0555, - xpc_sys_xpc_dir + .ctl_name = CTL_UNNUMBERED, + .procname = "xpc", + .mode = 0555, + .child = xpc_sys_xpc_dir }, - {0} + {} }; static struct ctl_table_header *xpc_sysctl; -- cgit v1.2.3 From 4e0099011838cc72ae693ef9c549bdd20704512d Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Wed, 14 Feb 2007 00:33:42 -0800 Subject: [PATCH] sysctl: C99 convert arch/ia64/kernel/perfmon and remove ABI breakage This convters the sysctl ctl_tables to use C99 initializers. While I was looking at it I discovered it was using a portion of the sysctl binary addresses space under CTL_KERN KERN_OSTYPE which was completely inappropriate. So I completely removed all of the sysctl binary names, to remove and avoid the ABI conflict. Signed-off-by: Eric W. Biederman Cc: "Luck, Tony" Cc: Stephane Eranian Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ia64/kernel/perfmon.c | 56 ++++++++++++++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c index 9860794a68fb..d2f299d98977 100644 --- a/arch/ia64/kernel/perfmon.c +++ b/arch/ia64/kernel/perfmon.c @@ -521,19 +521,57 @@ pfm_sysctl_t pfm_sysctl; EXPORT_SYMBOL(pfm_sysctl); static ctl_table pfm_ctl_table[]={ - {1, "debug", &pfm_sysctl.debug, sizeof(int), 0666, NULL, &proc_dointvec, NULL,}, - {2, "debug_ovfl", &pfm_sysctl.debug_ovfl, sizeof(int), 0666, NULL, &proc_dointvec, NULL,}, - {3, "fastctxsw", &pfm_sysctl.fastctxsw, sizeof(int), 0600, NULL, &proc_dointvec, NULL,}, - {4, "expert_mode", &pfm_sysctl.expert_mode, sizeof(int), 0600, NULL, &proc_dointvec, NULL,}, - { 0, }, + { + .ctl_name = CTL_UNNUMBERED, + .procname = "debug", + .data = &pfm_sysctl.debug, + .maxlen = sizeof(int), + .mode = 0666, + .proc_handler = &proc_dointvec, + }, + { + .ctl_name = CTL_UNNUMBERED, + .procname = "debug_ovfl", + .data = &pfm_sysctl.debug_ovfl, + .maxlen = sizeof(int), + .mode = 0666, + .proc_handler = &proc_dointvec, + }, + { + .ctl_name = CTL_UNNUMBERED, + .procname = "fastctxsw", + .data = &pfm_sysctl.fastctxsw, + .maxlen = sizeof(int), + .mode = 0600, + .proc_handler = &proc_dointvec, + }, + { + .ctl_name = CTL_UNNUMBERED, + .procname = "expert_mode", + .data = &pfm_sysctl.expert_mode, + .maxlen = sizeof(int), + .mode = 0600, + .proc_handler = &proc_dointvec, + }, + {} }; static ctl_table pfm_sysctl_dir[] = { - {1, "perfmon", NULL, 0, 0755, pfm_ctl_table, }, - {0,}, + { + .ctl_name = CTL_UNNUMBERED, + .procname = "perfmon", + .mode = 0755, + .child = pfm_ctl_table, + }, + {} }; static ctl_table pfm_sysctl_root[] = { - {1, "kernel", NULL, 0, 0755, pfm_sysctl_dir, }, - {0,}, + { + .ctl_name = CTL_KERN, + .procname = "kernel", + .mode = 0755, + .child = pfm_sysctl_dir, + }, + {} }; static struct ctl_table_header *pfm_sysctl_header; -- cgit v1.2.3 From ee404566f97f9254433399fbbcfa05390c7c55f7 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Wed, 14 Feb 2007 00:33:43 -0800 Subject: [PATCH] sysctl: mips/au1000: remove sys_sysctl support The assignment of binary numbers for sys_sysctl use was in shambles and despite requiring methods. Nothing was implemented on the sys_sysctl side. So this patch gives a mercy killing to the sys_sysctl support for powermanagment on mips/au1000. Signed-off-by: Eric W. Biederman Acked-by: Ralf Baechle Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/mips/au1000/common/power.c | 16 +++++----------- 1 file changed, 5 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/mips/au1000/common/power.c b/arch/mips/au1000/common/power.c index 7504a6364616..b531ab747c90 100644 --- a/arch/mips/au1000/common/power.c +++ b/arch/mips/au1000/common/power.c @@ -62,12 +62,6 @@ extern unsigned long save_local_and_disable(int controller); extern void restore_local_and_enable(int controller, unsigned long mask); extern void local_enable_irq(unsigned int irq_nr); -/* Quick acpi hack. This will have to change! */ -#define CTL_ACPI 9999 -#define ACPI_S1_SLP_TYP 19 -#define ACPI_SLEEP 21 - - static DEFINE_SPINLOCK(pm_lock); /* We need to save/restore a bunch of core registers that are @@ -425,14 +419,14 @@ static int pm_do_freq(ctl_table * ctl, int write, struct file *file, static struct ctl_table pm_table[] = { - {ACPI_S1_SLP_TYP, "suspend", NULL, 0, 0600, NULL, &pm_do_suspend}, - {ACPI_SLEEP, "sleep", NULL, 0, 0600, NULL, &pm_do_sleep}, - {CTL_ACPI, "freq", NULL, 0, 0600, NULL, &pm_do_freq}, + {CTL_UNNUMBERED, "suspend", NULL, 0, 0600, NULL, &pm_do_suspend}, + {CTL_UNNUMBERED, "sleep", NULL, 0, 0600, NULL, &pm_do_sleep}, + {CTL_UNNUMBERED, "freq", NULL, 0, 0600, NULL, &pm_do_freq}, {0} }; static struct ctl_table pm_dir_table[] = { - {CTL_ACPI, "pm", NULL, 0, 0555, pm_table}, + {CTL_UNNUMBERED, "pm", NULL, 0, 0555, pm_table}, {0} }; @@ -441,7 +435,7 @@ static struct ctl_table pm_dir_table[] = { */ static int __init pm_init(void) { - register_sysctl_table(pm_dir_table, 1); + register_sysctl_table(pm_dir_table, 0); return 0; } -- cgit v1.2.3 From 7ed744d1e8faed90aa027c08eeed21c4120e623d Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Wed, 14 Feb 2007 00:33:43 -0800 Subject: [PATCH] sysctl: C99 convert the ctl_tables in arch/mips/au1000/common/power.c Signed-off-by: Eric W. Biederman Acked-by: Ralf Baechle Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/mips/au1000/common/power.c | 38 ++++++++++++++++++++++++++++++++------ 1 file changed, 32 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/mips/au1000/common/power.c b/arch/mips/au1000/common/power.c index b531ab747c90..31256b85df6d 100644 --- a/arch/mips/au1000/common/power.c +++ b/arch/mips/au1000/common/power.c @@ -419,15 +419,41 @@ static int pm_do_freq(ctl_table * ctl, int write, struct file *file, static struct ctl_table pm_table[] = { - {CTL_UNNUMBERED, "suspend", NULL, 0, 0600, NULL, &pm_do_suspend}, - {CTL_UNNUMBERED, "sleep", NULL, 0, 0600, NULL, &pm_do_sleep}, - {CTL_UNNUMBERED, "freq", NULL, 0, 0600, NULL, &pm_do_freq}, - {0} + { + .ctl_name = CTL_UNNUMBERED, + .procname = "suspend", + .data = NULL, + .maxlen = 0, + .mode = 0600, + .proc_handler = &pm_do_suspend + }, + { + .ctl_name = CTL_UNNUMBERED, + .procname = "sleep", + .data = NULL, + .maxlen = 0, + .mode = 0600, + .proc_handler = &pm_do_sleep + }, + { + .ctl_name = CTL_UNNUMBERED, + .procname = "freq", + .data = NULL, + .maxlen = 0, + .mode = 0600, + .proc_handler = &pm_do_freq + }, + {} }; static struct ctl_table pm_dir_table[] = { - {CTL_UNNUMBERED, "pm", NULL, 0, 0555, pm_table}, - {0} + { + .ctl_name = CTL_UNNUMBERED, + .procname = "pm", + .mode = 0555, + .child = pm_table + }, + {} }; /* -- cgit v1.2.3 From 8d8cb8a1bbd92a77208bdeaa25c3f17f5da9297d Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Wed, 14 Feb 2007 00:33:44 -0800 Subject: [PATCH] sysctl: C99 convert arch/mips/lasat/sysctl.c and remove ABI breakage While C99 converting the ctl_table initializers I realized that the binary sysctl numbers were in conflict with the binary values under CTL_KERN. Including CTL_KERN KERN_VERSION as used by glibc. So I just removed the sysctl binary interface for these values, as it was unsupportable. Luckily these sysctl were inserted at the end of the sysctl list so this bug was not visible to userspace. Signed-off-by: Eric W. Biederman Acked-by: Ralf Baechle Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/mips/lasat/sysctl.c | 145 +++++++++++++++++++++++++++++++++++++---------- 1 file changed, 116 insertions(+), 29 deletions(-) (limited to 'arch') diff --git a/arch/mips/lasat/sysctl.c b/arch/mips/lasat/sysctl.c index 12878359f2c8..c04e82fb9d59 100644 --- a/arch/mips/lasat/sysctl.c +++ b/arch/mips/lasat/sysctl.c @@ -302,42 +302,129 @@ extern int lasat_boot_to_service; #ifdef CONFIG_SYSCTL static ctl_table lasat_table[] = { - {LASAT_CPU_HZ, "cpu-hz", &lasat_board_info.li_cpu_hz, sizeof(int), - 0444, NULL, &proc_dointvec, &sysctl_intvec}, - {LASAT_BUS_HZ, "bus-hz", &lasat_board_info.li_bus_hz, sizeof(int), - 0444, NULL, &proc_dointvec, &sysctl_intvec}, - {LASAT_MODEL, "bmid", &lasat_board_info.li_bmid, sizeof(int), - 0444, NULL, &proc_dointvec, &sysctl_intvec}, - {LASAT_PRID, "prid", &lasat_board_info.li_prid, sizeof(int), - 0644, NULL, &proc_lasat_eeprom_value, &sysctl_lasat_eeprom_value}, + { + .ctl_name = CTL_UNNUMBERED, + .procname = "cpu-hz", + .data = &lasat_board_info.li_cpu_hz, + .maxlen = sizeof(int), + .mode = 0444, + .proc_handler = &proc_dointvec, + .strategy = &sysctl_intvec + }, + { + .ctl_name = CTL_UNNUMBERED, + .procname = "bus-hz", + .data = &lasat_board_info.li_bus_hz, + .maxlen = sizeof(int), + .mode = 0444, + .proc_handler = &proc_dointvec, + .strategy = &sysctl_intvec + }, + { + .ctl_name = CTL_UNNUMBERED, + .procname = "bmid", + .data = &lasat_board_info.li_bmid, + .maxlen = sizeof(int), + .mode = 0444, + .proc_handler = &proc_dointvec, + .strategy = &sysctl_intvec + }, + { + .ctl_name = CTL_UNNUMBERED, + .procname = "prid", + .data = &lasat_board_info.li_prid, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = &proc_lasat_eeprom_value, + .strategy = &sysctl_lasat_eeprom_value + }, #ifdef CONFIG_INET - {LASAT_IPADDR, "ipaddr", &lasat_board_info.li_eeprom_info.ipaddr, sizeof(int), - 0644, NULL, &proc_lasat_ip, &sysctl_lasat_intvec}, - {LASAT_NETMASK, "netmask", &lasat_board_info.li_eeprom_info.netmask, sizeof(int), - 0644, NULL, &proc_lasat_ip, &sysctl_lasat_intvec}, - {LASAT_BCAST, "bcastaddr", &lasat_bcastaddr, - sizeof(lasat_bcastaddr), 0600, NULL, - &proc_dostring, &sysctl_string}, + { + .ctl_name = CTL_UNNUMBERED, + .procname = "ipaddr", + .data = &lasat_board_info.li_eeprom_info.ipaddr, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = &proc_lasat_ip, + .strategy = &sysctl_lasat_intvec + }, + { + .ctl_name = LASAT_NETMASK, + .procname = "netmask", + .data = &lasat_board_info.li_eeprom_info.netmask, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = &proc_lasat_ip, + .strategy = &sysctl_lasat_intvec + }, + { + .ctl_name = CTL_UNNUMBERED, + .procname = "bcastaddr", + .data = &lasat_bcastaddr, + .maxlen = sizeof(lasat_bcastaddr), + .mode = 0600, + .proc_handler = &proc_dostring, + .strategy = &sysctl_string + }, #endif - {LASAT_PASSWORD, "passwd_hash", &lasat_board_info.li_eeprom_info.passwd_hash, sizeof(lasat_board_info.li_eeprom_info.passwd_hash), - 0600, NULL, &proc_dolasatstring, &sysctl_lasatstring}, - {LASAT_SBOOT, "boot-service", &lasat_boot_to_service, sizeof(int), - 0644, NULL, &proc_dointvec, &sysctl_intvec}, + { + .ctl_name = CTL_UNNUMBERED, + .procname = "passwd_hash", + .data = &lasat_board_info.li_eeprom_info.passwd_hash, + .maxlen = sizeof(lasat_board_info.li_eeprom_info.passwd_hash), + .mode = 0600, + .proc_handler = &proc_dolasatstring, + .strategy = &sysctl_lasatstring + }, + { + .ctl_name = CTL_UNNUMBERED, + .procname = "boot-service", + .data = &lasat_boot_to_service, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = &proc_dointvec, + .strategy = &sysctl_intvec + }, #ifdef CONFIG_DS1603 - {LASAT_RTC, "rtc", &rtctmp, sizeof(int), - 0644, NULL, &proc_dolasatrtc, &sysctl_lasat_rtc}, + { + .ctl_name = CTL_UNNUMBERED, + .procname = "rtc", + .data = &rtctmp, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = &proc_dolasatrtc, + .strategy = &sysctl_lasat_rtc + }, #endif - {LASAT_NAMESTR, "namestr", &lasat_board_info.li_namestr, sizeof(lasat_board_info.li_namestr), - 0444, NULL, &proc_dostring, &sysctl_string}, - {LASAT_TYPESTR, "typestr", &lasat_board_info.li_typestr, sizeof(lasat_board_info.li_typestr), - 0444, NULL, &proc_dostring, &sysctl_string}, - {0} + { + .ctl_name = CTL_UNNUMBERED, + .procname = "namestr", + .data = &lasat_board_info.li_namestr, + .maxlen = sizeof(lasat_board_info.li_namestr), + .mode = 0444, + .proc_handler = &proc_dostring, + .strategy = &sysctl_string + }, + { + .ctl_name = CTL_UNNUMBERED, + .procname = "typestr", + .data = &lasat_board_info.li_typestr, + .maxlen = sizeof(lasat_board_info.li_typestr), + .mode = 0444, + .proc_handler = &proc_dostring, + .strategy = &sysctl_string + }, + {} }; -#define CTL_LASAT 1 // CTL_ANY ??? static ctl_table lasat_root_table[] = { - { CTL_LASAT, "lasat", NULL, 0, 0555, lasat_table }, - { 0 } + { + .ctl_name = CTL_UNNUMBERED, + .procname = "lasat", + .mode = 0555, + .child = lasat_table + }, + {} }; static int __init lasat_register_sysctl(void) -- cgit v1.2.3 From feceb63ec589380f2125edcb70127e6a635af1cc Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Wed, 14 Feb 2007 00:33:45 -0800 Subject: [PATCH] sysctl: s390: move sysctl definitions to sysctl.h We need to have the the definition of all top level sysctl directories registers in sysctl.h so we don't conflict by accident and cause abi problems. Signed-off-by: Eric W. Biederman Acked-by: Martin Schwidefsky Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/s390/appldata/appldata.h | 3 +-- arch/s390/kernel/debug.c | 1 - arch/s390/mm/cmm.c | 4 ---- 3 files changed, 1 insertion(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/s390/appldata/appldata.h b/arch/s390/appldata/appldata.h index 0429481dea63..4069b81f7f1d 100644 --- a/arch/s390/appldata/appldata.h +++ b/arch/s390/appldata/appldata.h @@ -21,8 +21,7 @@ #define APPLDATA_RECORD_NET_SUM_ID 0x03 /* must be < 256 ! */ #define APPLDATA_RECORD_PROC_ID 0x04 -#define CTL_APPLDATA 2120 /* sysctl IDs, must be unique */ -#define CTL_APPLDATA_TIMER 2121 +#define CTL_APPLDATA_TIMER 2121 /* sysctl IDs, must be unique */ #define CTL_APPLDATA_INTERVAL 2122 #define CTL_APPLDATA_MEM 2123 #define CTL_APPLDATA_OS 2124 diff --git a/arch/s390/kernel/debug.c b/arch/s390/kernel/debug.c index 51653d82d7df..3fcde156ff3a 100644 --- a/arch/s390/kernel/debug.c +++ b/arch/s390/kernel/debug.c @@ -852,7 +852,6 @@ debug_finish_entry(debug_info_t * id, debug_entry_t* active, int level, static int debug_stoppable=1; static int debug_active=1; -#define CTL_S390DBF 5677 #define CTL_S390DBF_STOPPABLE 5678 #define CTL_S390DBF_ACTIVE 5679 diff --git a/arch/s390/mm/cmm.c b/arch/s390/mm/cmm.c index f93a056869bc..ccb9ab5c73b3 100644 --- a/arch/s390/mm/cmm.c +++ b/arch/s390/mm/cmm.c @@ -256,10 +256,6 @@ cmm_skip_blanks(char *cp, char **endp) } #ifdef CONFIG_CMM_PROC -/* These will someday get removed. */ -#define VM_CMM_PAGES 1111 -#define VM_CMM_TIMED_PAGES 1112 -#define VM_CMM_TIMEOUT 1113 static struct ctl_table cmm_table[]; -- cgit v1.2.3 From 481f7337a1316c11b357ab838653f7f9254643be Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Wed, 14 Feb 2007 00:33:46 -0800 Subject: [PATCH] sysctl: s390: remove unnecessary use of insert_at_head Signed-off-by: Eric W. Biederman Acked-by: Martin Schwidefsky Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/s390/appldata/appldata_base.c | 4 ++-- arch/s390/kernel/debug.c | 2 +- arch/s390/mm/cmm.c | 2 +- 3 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c index c9da7d16145e..58cefcf2d2cc 100644 --- a/arch/s390/appldata/appldata_base.c +++ b/arch/s390/appldata/appldata_base.c @@ -506,7 +506,7 @@ int appldata_register_ops(struct appldata_ops *ops) ops->ctl_table[3].ctl_name = 0; - ops->sysctl_header = register_sysctl_table(ops->ctl_table,1); + ops->sysctl_header = register_sysctl_table(ops->ctl_table,0); P_INFO("%s-ops registered!\n", ops->name); return 0; @@ -606,7 +606,7 @@ static int __init appldata_init(void) /* Register cpu hotplug notifier */ register_hotcpu_notifier(&appldata_nb); - appldata_sysctl_header = register_sysctl_table(appldata_dir_table, 1); + appldata_sysctl_header = register_sysctl_table(appldata_dir_table, 0); #ifdef MODULE appldata_dir_table[0].de->owner = THIS_MODULE; appldata_table[0].de->owner = THIS_MODULE; diff --git a/arch/s390/kernel/debug.c b/arch/s390/kernel/debug.c index 3fcde156ff3a..1b95148dc73b 100644 --- a/arch/s390/kernel/debug.c +++ b/arch/s390/kernel/debug.c @@ -1053,7 +1053,7 @@ __init debug_init(void) { int rc = 0; - s390dbf_sysctl_header = register_sysctl_table(s390dbf_dir_table, 1); + s390dbf_sysctl_header = register_sysctl_table(s390dbf_dir_table, 0); down(&debug_lock); debug_debugfs_root_entry = debugfs_create_dir(DEBUG_DIR_ROOT,NULL); printk(KERN_INFO "debug: Initialization complete\n"); diff --git a/arch/s390/mm/cmm.c b/arch/s390/mm/cmm.c index ccb9ab5c73b3..c6d6ddeb5e33 100644 --- a/arch/s390/mm/cmm.c +++ b/arch/s390/mm/cmm.c @@ -418,7 +418,7 @@ cmm_init (void) int rc = -ENOMEM; #ifdef CONFIG_CMM_PROC - cmm_sysctl_header = register_sysctl_table(cmm_dir_table, 1); + cmm_sysctl_header = register_sysctl_table(cmm_dir_table, 0); if (!cmm_sysctl_header) goto out; #endif -- cgit v1.2.3 From f5f106784eba94a00bbe73be651e423386ebe6d4 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Wed, 14 Feb 2007 00:33:46 -0800 Subject: [PATCH] sysctl: C99 convert ctl_tables in arch/powerpc/kernel/idle.c This was partially done already and there was no ABI breakage what a relief. Signed-off-by: Eric W. Biederman Acked-by: Benjamin Herrenschmidt Cc: Paul Mackerras Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/powerpc/kernel/idle.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/idle.c b/arch/powerpc/kernel/idle.c index 8994af327b47..8b27bb1a5b31 100644 --- a/arch/powerpc/kernel/idle.c +++ b/arch/powerpc/kernel/idle.c @@ -110,11 +110,16 @@ static ctl_table powersave_nap_ctl_table[]={ .mode = 0644, .proc_handler = &proc_dointvec, }, - { 0, }, + {} }; static ctl_table powersave_nap_sysctl_root[] = { - { 1, "kernel", NULL, 0, 0755, powersave_nap_ctl_table, }, - { 0,}, + { + .ctl_name = CTL_KERN, + .procname = "kernel", + .mode = 0755, + .child = powersave_nap_ctl_table, + }, + {} }; static int __init -- cgit v1.2.3 From ded2e9bdfc5ac09f29b9f73fc1b75b1080edef90 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Wed, 14 Feb 2007 00:33:47 -0800 Subject: [PATCH] sysctl: C99 convert ctl_tables entries in arch/ppc/kernel/ppc_htab.c And make the mode of the kernel directory 0555 no one is allowed to write to sysctl directories. Signed-off-by: Eric W. Biederman Acked-by: Benjamin Herrenschmidt Cc: Paul Mackerras Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc/kernel/ppc_htab.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/ppc/kernel/ppc_htab.c b/arch/ppc/kernel/ppc_htab.c index bd129d3c2cc1..77b20ff672b8 100644 --- a/arch/ppc/kernel/ppc_htab.c +++ b/arch/ppc/kernel/ppc_htab.c @@ -442,11 +442,16 @@ static ctl_table htab_ctl_table[]={ .mode = 0644, .proc_handler = &proc_dol2crvec, }, - { 0, }, + {} }; static ctl_table htab_sysctl_root[] = { - { 1, "kernel", NULL, 0, 0755, htab_ctl_table, }, - { 0,}, + { + .ctl_name = CTL_KERN, + .procname = "kernel", + .mode = 0555, + .child = htab_ctl_table, + }, + {} }; static int __init -- cgit v1.2.3 From e3c6449dcdfa023ca45b7ef1f7dce102f34f25ad Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Wed, 14 Feb 2007 00:33:48 -0800 Subject: [PATCH] sysctl: C99 convert arch/sh64/kernel/traps.c and remove ABI breakage While doing the C99 conversion I notices that the top level sh64 directory was using the binary number for CTL_KERN. That is a no-no so I removed the support for the sysctl binary interface only leaving sysctl /proc support. At least the sysctl tables were placed at the end of the list so user space did not see this mistake. Signed-off-by: Eric W. Biederman Acked-by: Paul Mundt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/sh64/kernel/traps.c | 49 +++++++++++++++++++++++++++++++++++++----------- 1 file changed, 38 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/sh64/kernel/traps.c b/arch/sh64/kernel/traps.c index 224b7f5b9224..02cca742cf03 100644 --- a/arch/sh64/kernel/traps.c +++ b/arch/sh64/kernel/traps.c @@ -910,25 +910,52 @@ static int misaligned_fixup(struct pt_regs *regs) } static ctl_table unaligned_table[] = { - {1, "kernel_reports", &kernel_mode_unaligned_fixup_count, - sizeof(int), 0644, NULL, &proc_dointvec}, + { + .ctl_name = CTL_UNNUMBERED, + .procname = "kernel_reports", + .data = &kernel_mode_unaligned_fixup_count, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = &proc_dointvec + }, #if defined(CONFIG_SH64_USER_MISALIGNED_FIXUP) - {2, "user_reports", &user_mode_unaligned_fixup_count, - sizeof(int), 0644, NULL, &proc_dointvec}, - {3, "user_enable", &user_mode_unaligned_fixup_enable, - sizeof(int), 0644, NULL, &proc_dointvec}, + { + .ctl_name = CTL_UNNUMBERED, + .procname = "user_reports", + .data = &user_mode_unaligned_fixup_count, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = &proc_dointvec + }, + { + .ctl_name = CTL_UNNUMBERED, + .procname = "user_enable", + .data = &user_mode_unaligned_fixup_enable, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = &proc_dointvec}, #endif - {0} + {} }; static ctl_table unaligned_root[] = { - {1, "unaligned_fixup", NULL, 0, 0555, unaligned_table}, - {0} + { + .ctl_name = CTL_UNNUMBERED, + .procname = "unaligned_fixup", + .mode = 0555, + unaligned_table + }, + {} }; static ctl_table sh64_root[] = { - {1, "sh64", NULL, 0, 0555, unaligned_root}, - {0} + { + .ctl_name = CTL_UNNUMBERED, + .procname = "sh64", + .mode = 0555, + .child = unaligned_root + }, + {} }; static struct ctl_table_header *sysctl_header; static int __init init_sysctl(void) -- cgit v1.2.3 From f3854517f3b4cf372d3d5a2a71969c9b26090b7a Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Wed, 14 Feb 2007 00:33:49 -0800 Subject: [PATCH] sysctl: x86_64: remove unnecessary use of insert_at_head The only sysctl x86_64 provides are not provided elsewhere, so insert_at_head is unnecessary. Signed-off-by: Eric W. Biederman Acked-by: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86_64/ia32/ia32_binfmt.c | 2 +- arch/x86_64/mm/init.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/ia32/ia32_binfmt.c b/arch/x86_64/ia32/ia32_binfmt.c index 6efe04f3cbca..44c83be70e08 100644 --- a/arch/x86_64/ia32/ia32_binfmt.c +++ b/arch/x86_64/ia32/ia32_binfmt.c @@ -357,7 +357,7 @@ static ctl_table abi_root_table2[] = { static __init int ia32_binfmt_init(void) { - register_sysctl_table(abi_root_table2, 1); + register_sysctl_table(abi_root_table2, 0); return 0; } __initcall(ia32_binfmt_init); diff --git a/arch/x86_64/mm/init.c b/arch/x86_64/mm/init.c index 2968b90ef8ad..65aa66c35295 100644 --- a/arch/x86_64/mm/init.c +++ b/arch/x86_64/mm/init.c @@ -724,7 +724,7 @@ static ctl_table debug_root_table2[] = { static __init int x8664_sysctl_init(void) { - register_sysctl_table(debug_root_table2, 1); + register_sysctl_table(debug_root_table2, 0); return 0; } __initcall(x8664_sysctl_init); -- cgit v1.2.3 From 306421f387ccea0e8eeb04425e674910f100952b Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Wed, 14 Feb 2007 00:33:49 -0800 Subject: [PATCH] sysctl: C99 convert ctl_tables in arch/x86_64/ia32/ia32_binfmt.c Signed-off-by: Eric W. Biederman Acked-by: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86_64/ia32/ia32_binfmt.c | 30 ++++++++++++++++++++---------- 1 file changed, 20 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/ia32/ia32_binfmt.c b/arch/x86_64/ia32/ia32_binfmt.c index 44c83be70e08..354a0a01ec2d 100644 --- a/arch/x86_64/ia32/ia32_binfmt.c +++ b/arch/x86_64/ia32/ia32_binfmt.c @@ -344,16 +344,26 @@ EXPORT_SYMBOL(ia32_setup_arg_pages); #include static ctl_table abi_table2[] = { - { 99, "vsyscall32", &sysctl_vsyscall32, sizeof(int), 0644, NULL, - proc_dointvec }, - { 0, } -}; - -static ctl_table abi_root_table2[] = { - { .ctl_name = CTL_ABI, .procname = "abi", .mode = 0555, - .child = abi_table2 }, - { 0 }, -}; + { + .ctl_name = 99, + .procname = "vsyscall32", + .data = &sysctl_vsyscall32, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = proc_dointvec + }, + {} +}; + +static ctl_table abi_root_table2[] = { + { + .ctl_name = CTL_ABI, + .procname = "abi", + .mode = 0555, + .child = abi_table2 + }, + {} +}; static __init int ia32_binfmt_init(void) { -- cgit v1.2.3 From 7a44d37d8c633cfee145c7276c0777defd964858 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Wed, 14 Feb 2007 00:33:50 -0800 Subject: [PATCH] sysctl: C99 convert ctl_tables in arch/x86_64/kernel/vsyscall.c Basically everything was done but I removed all element initializers from the trailing entries to make it clear the entire last entry should be zero filled. Signed-off-by: Eric W. Biederman Acked-by: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86_64/kernel/vsyscall.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/vsyscall.c b/arch/x86_64/kernel/vsyscall.c index 2433d6fc68b1..c0e2b48be308 100644 --- a/arch/x86_64/kernel/vsyscall.c +++ b/arch/x86_64/kernel/vsyscall.c @@ -235,13 +235,13 @@ static ctl_table kernel_table2[] = { .data = &sysctl_vsyscall, .maxlen = sizeof(int), .mode = 0644, .strategy = vsyscall_sysctl_nostrat, .proc_handler = vsyscall_sysctl_change }, - { 0, } + {} }; static ctl_table kernel_root_table2[] = { { .ctl_name = CTL_KERN, .procname = "kernel", .mode = 0555, .child = kernel_table2 }, - { 0 }, + {} }; #endif -- cgit v1.2.3 From c37ce0324962010e768f2570e2603553263ff219 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Wed, 14 Feb 2007 00:33:51 -0800 Subject: [PATCH] sysctl: C99 convert ctl_tables in arch/x86_64/mm/init.c Signed-off-by: Eric W. Biederman Acked-by: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86_64/mm/init.c | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/mm/init.c b/arch/x86_64/mm/init.c index 65aa66c35295..a5c12ea57683 100644 --- a/arch/x86_64/mm/init.c +++ b/arch/x86_64/mm/init.c @@ -711,15 +711,25 @@ int kern_addr_valid(unsigned long addr) extern int exception_trace, page_fault_trace; static ctl_table debug_table2[] = { - { 99, "exception-trace", &exception_trace, sizeof(int), 0644, NULL, - proc_dointvec }, - { 0, } + { + .ctl_name = 99, + .procname = "exception-trace", + .data = &exception_trace, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = proc_dointvec + }, + {} }; static ctl_table debug_root_table2[] = { - { .ctl_name = CTL_DEBUG, .procname = "debug", .mode = 0555, - .child = debug_table2 }, - { 0 }, + { + .ctl_name = CTL_DEBUG, + .procname = "debug", + .mode = 0555, + .child = debug_table2 + }, + {} }; static __init int x8664_sysctl_init(void) -- cgit v1.2.3 From 0b4d414714f0d2f922d39424b0c5c82ad900a381 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Wed, 14 Feb 2007 00:34:09 -0800 Subject: [PATCH] sysctl: remove insert_at_head from register_sysctl The semantic effect of insert_at_head is that it would allow new registered sysctl entries to override existing sysctl entries of the same name. Which is pain for caching and the proc interface never implemented. I have done an audit and discovered that none of the current users of register_sysctl care as (excpet for directories) they do not register duplicate sysctl entries. So this patch simply removes the support for overriding existing entries in the sys_sysctl interface since no one uses it or cares and it makes future enhancments harder. Signed-off-by: Eric W. Biederman Acked-by: Ralf Baechle Acked-by: Martin Schwidefsky Cc: Russell King Cc: David Howells Cc: "Luck, Tony" Cc: Ralf Baechle Cc: Paul Mackerras Cc: Martin Schwidefsky Cc: Andi Kleen Cc: Jens Axboe Cc: Corey Minyard Cc: Neil Brown Cc: "John W. Linville" Cc: James Bottomley Cc: Jan Kara Cc: Trond Myklebust Cc: Mark Fasheh Cc: David Chinner Cc: "David S. Miller" Cc: Patrick McHardy Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/arm/kernel/isa.c | 2 +- arch/frv/kernel/pm.c | 2 +- arch/frv/kernel/sysctl.c | 2 +- arch/ia64/kernel/crash.c | 2 +- arch/ia64/kernel/perfmon.c | 2 +- arch/ia64/sn/kernel/xpc_main.c | 2 +- arch/mips/au1000/common/power.c | 2 +- arch/mips/lasat/sysctl.c | 2 +- arch/powerpc/kernel/idle.c | 2 +- arch/ppc/kernel/ppc_htab.c | 2 +- arch/s390/appldata/appldata_base.c | 4 ++-- arch/s390/kernel/debug.c | 2 +- arch/s390/mm/cmm.c | 2 +- arch/sh64/kernel/traps.c | 2 +- arch/x86_64/ia32/ia32_binfmt.c | 2 +- arch/x86_64/kernel/vsyscall.c | 2 +- arch/x86_64/mm/init.c | 2 +- 17 files changed, 18 insertions(+), 18 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/isa.c b/arch/arm/kernel/isa.c index 54bbd9fe255c..50a30bc91872 100644 --- a/arch/arm/kernel/isa.c +++ b/arch/arm/kernel/isa.c @@ -70,5 +70,5 @@ register_isa_ports(unsigned int membase, unsigned int portbase, unsigned int por isa_membase = membase; isa_portbase = portbase; isa_portshift = portshift; - isa_sysctl_header = register_sysctl_table(ctl_bus, 0); + isa_sysctl_header = register_sysctl_table(ctl_bus); } diff --git a/arch/frv/kernel/pm.c b/arch/frv/kernel/pm.c index aa503338985f..c57ce3f1f2e2 100644 --- a/arch/frv/kernel/pm.c +++ b/arch/frv/kernel/pm.c @@ -455,7 +455,7 @@ static struct ctl_table pm_dir_table[] = */ static int __init pm_init(void) { - register_sysctl_table(pm_dir_table, 0); + register_sysctl_table(pm_dir_table); return 0; } diff --git a/arch/frv/kernel/sysctl.c b/arch/frv/kernel/sysctl.c index 577ad16cf840..3e9d7e03fb95 100644 --- a/arch/frv/kernel/sysctl.c +++ b/arch/frv/kernel/sysctl.c @@ -216,7 +216,7 @@ static struct ctl_table frv_dir_table[] = */ static int __init frv_sysctl_init(void) { - register_sysctl_table(frv_dir_table, 0); + register_sysctl_table(frv_dir_table); return 0; } diff --git a/arch/ia64/kernel/crash.c b/arch/ia64/kernel/crash.c index 37bb16f07fc3..5cdd2f5fa064 100644 --- a/arch/ia64/kernel/crash.c +++ b/arch/ia64/kernel/crash.c @@ -222,7 +222,7 @@ machine_crash_setup(void) if((ret = register_die_notifier(&kdump_init_notifier_nb)) != 0) return ret; #ifdef CONFIG_SYSCTL - register_sysctl_table(sys_table, 0); + register_sysctl_table(sys_table); #endif return 0; } diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c index d2f299d98977..2ecb20b551e1 100644 --- a/arch/ia64/kernel/perfmon.c +++ b/arch/ia64/kernel/perfmon.c @@ -6726,7 +6726,7 @@ pfm_init(void) /* * create /proc/sys/kernel/perfmon (for debugging purposes) */ - pfm_sysctl_header = register_sysctl_table(pfm_sysctl_root, 0); + pfm_sysctl_header = register_sysctl_table(pfm_sysctl_root); /* * initialize all our spinlocks diff --git a/arch/ia64/sn/kernel/xpc_main.c b/arch/ia64/sn/kernel/xpc_main.c index e04f7b5f2aab..68355ef6f841 100644 --- a/arch/ia64/sn/kernel/xpc_main.c +++ b/arch/ia64/sn/kernel/xpc_main.c @@ -1241,7 +1241,7 @@ xpc_init(void) snprintf(xpc_part->bus_id, BUS_ID_SIZE, "part"); snprintf(xpc_chan->bus_id, BUS_ID_SIZE, "chan"); - xpc_sysctl = register_sysctl_table(xpc_sys_dir, 0); + xpc_sysctl = register_sysctl_table(xpc_sys_dir); /* * The first few fields of each entry of xpc_partitions[] need to diff --git a/arch/mips/au1000/common/power.c b/arch/mips/au1000/common/power.c index 31256b85df6d..3901e8e04755 100644 --- a/arch/mips/au1000/common/power.c +++ b/arch/mips/au1000/common/power.c @@ -461,7 +461,7 @@ static struct ctl_table pm_dir_table[] = { */ static int __init pm_init(void) { - register_sysctl_table(pm_dir_table, 0); + register_sysctl_table(pm_dir_table); return 0; } diff --git a/arch/mips/lasat/sysctl.c b/arch/mips/lasat/sysctl.c index c04e82fb9d59..699ab1886ceb 100644 --- a/arch/mips/lasat/sysctl.c +++ b/arch/mips/lasat/sysctl.c @@ -432,7 +432,7 @@ static int __init lasat_register_sysctl(void) struct ctl_table_header *lasat_table_header; lasat_table_header = - register_sysctl_table(lasat_root_table, 0); + register_sysctl_table(lasat_root_table); return 0; } diff --git a/arch/powerpc/kernel/idle.c b/arch/powerpc/kernel/idle.c index 8b27bb1a5b31..6e7f50967bab 100644 --- a/arch/powerpc/kernel/idle.c +++ b/arch/powerpc/kernel/idle.c @@ -125,7 +125,7 @@ static ctl_table powersave_nap_sysctl_root[] = { static int __init register_powersave_nap_sysctl(void) { - register_sysctl_table(powersave_nap_sysctl_root, 0); + register_sysctl_table(powersave_nap_sysctl_root); return 0; } diff --git a/arch/ppc/kernel/ppc_htab.c b/arch/ppc/kernel/ppc_htab.c index 77b20ff672b8..0a7e42d54eaf 100644 --- a/arch/ppc/kernel/ppc_htab.c +++ b/arch/ppc/kernel/ppc_htab.c @@ -457,7 +457,7 @@ static ctl_table htab_sysctl_root[] = { static int __init register_ppc_htab_sysctl(void) { - register_sysctl_table(htab_sysctl_root, 0); + register_sysctl_table(htab_sysctl_root); return 0; } diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c index 58cefcf2d2cc..0c3cf4b16ae4 100644 --- a/arch/s390/appldata/appldata_base.c +++ b/arch/s390/appldata/appldata_base.c @@ -506,7 +506,7 @@ int appldata_register_ops(struct appldata_ops *ops) ops->ctl_table[3].ctl_name = 0; - ops->sysctl_header = register_sysctl_table(ops->ctl_table,0); + ops->sysctl_header = register_sysctl_table(ops->ctl_table); P_INFO("%s-ops registered!\n", ops->name); return 0; @@ -606,7 +606,7 @@ static int __init appldata_init(void) /* Register cpu hotplug notifier */ register_hotcpu_notifier(&appldata_nb); - appldata_sysctl_header = register_sysctl_table(appldata_dir_table, 0); + appldata_sysctl_header = register_sysctl_table(appldata_dir_table); #ifdef MODULE appldata_dir_table[0].de->owner = THIS_MODULE; appldata_table[0].de->owner = THIS_MODULE; diff --git a/arch/s390/kernel/debug.c b/arch/s390/kernel/debug.c index 1b95148dc73b..eca3fe595ff4 100644 --- a/arch/s390/kernel/debug.c +++ b/arch/s390/kernel/debug.c @@ -1053,7 +1053,7 @@ __init debug_init(void) { int rc = 0; - s390dbf_sysctl_header = register_sysctl_table(s390dbf_dir_table, 0); + s390dbf_sysctl_header = register_sysctl_table(s390dbf_dir_table); down(&debug_lock); debug_debugfs_root_entry = debugfs_create_dir(DEBUG_DIR_ROOT,NULL); printk(KERN_INFO "debug: Initialization complete\n"); diff --git a/arch/s390/mm/cmm.c b/arch/s390/mm/cmm.c index c6d6ddeb5e33..c5b2f4f078bc 100644 --- a/arch/s390/mm/cmm.c +++ b/arch/s390/mm/cmm.c @@ -418,7 +418,7 @@ cmm_init (void) int rc = -ENOMEM; #ifdef CONFIG_CMM_PROC - cmm_sysctl_header = register_sysctl_table(cmm_dir_table, 0); + cmm_sysctl_header = register_sysctl_table(cmm_dir_table); if (!cmm_sysctl_header) goto out; #endif diff --git a/arch/sh64/kernel/traps.c b/arch/sh64/kernel/traps.c index 02cca742cf03..c346d7ef9280 100644 --- a/arch/sh64/kernel/traps.c +++ b/arch/sh64/kernel/traps.c @@ -960,7 +960,7 @@ static ctl_table sh64_root[] = { static struct ctl_table_header *sysctl_header; static int __init init_sysctl(void) { - sysctl_header = register_sysctl_table(sh64_root, 0); + sysctl_header = register_sysctl_table(sh64_root); return 0; } diff --git a/arch/x86_64/ia32/ia32_binfmt.c b/arch/x86_64/ia32/ia32_binfmt.c index 354a0a01ec2d..071100ea1251 100644 --- a/arch/x86_64/ia32/ia32_binfmt.c +++ b/arch/x86_64/ia32/ia32_binfmt.c @@ -367,7 +367,7 @@ static ctl_table abi_root_table2[] = { static __init int ia32_binfmt_init(void) { - register_sysctl_table(abi_root_table2, 0); + register_sysctl_table(abi_root_table2); return 0; } __initcall(ia32_binfmt_init); diff --git a/arch/x86_64/kernel/vsyscall.c b/arch/x86_64/kernel/vsyscall.c index c0e2b48be308..313dc6ad780b 100644 --- a/arch/x86_64/kernel/vsyscall.c +++ b/arch/x86_64/kernel/vsyscall.c @@ -301,7 +301,7 @@ static int __init vsyscall_init(void) BUG_ON((unsigned long) &vgetcpu != VSYSCALL_ADDR(__NR_vgetcpu)); map_vsyscall(); #ifdef CONFIG_SYSCTL - register_sysctl_table(kernel_root_table2, 0); + register_sysctl_table(kernel_root_table2); #endif on_each_cpu(cpu_vsyscall_init, NULL, 0, 1); hotcpu_notifier(cpu_vsyscall_notifier, 0); diff --git a/arch/x86_64/mm/init.c b/arch/x86_64/mm/init.c index a5c12ea57683..ec31534eb104 100644 --- a/arch/x86_64/mm/init.c +++ b/arch/x86_64/mm/init.c @@ -734,7 +734,7 @@ static ctl_table debug_root_table2[] = { static __init int x8664_sysctl_init(void) { - register_sysctl_table(debug_root_table2, 0); + register_sysctl_table(debug_root_table2); return 0; } __initcall(x8664_sysctl_init); -- cgit v1.2.3 From 2b8c0e13026c30bd154dc521ffc235360830c712 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=B3=20Bilski?= Date: Wed, 14 Feb 2007 22:00:37 +0100 Subject: [CPUFREQ] Longhaul - Redo Longhaul ver. 2 Start using v2 version of Longhaul when available. It provides voltage scaling and can use ACPI C3 state. That's curious. CPU will not change frequency on ACPI C3 when v1 is in use, but it will when v2 is used. Driver will return max frequency all the time if this isn't true for all processors. There is strange thing with mobile voltage. Looks like only Nehemiah (C3-M) supports it. Earlier processors have different mobile VRM (in docs), but I can't find any which is using it. Looks like all are using VRM 8.5. So fail for non Nehemiah with mobile VRM. Signed-off-by: Rafal Bilski Signed-off-by: Dave Jones --- arch/i386/kernel/cpu/cpufreq/longhaul.c | 53 +++++++++++++++++++-------------- 1 file changed, 31 insertions(+), 22 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c index fa5cac255c16..b59878a0d9b3 100644 --- a/arch/i386/kernel/cpu/cpufreq/longhaul.c +++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c @@ -8,12 +8,11 @@ * VIA have currently 3 different versions of Longhaul. * Version 1 (Longhaul) uses the BCR2 MSR at 0x1147. * It is present only in Samuel 1 (C5A), Samuel 2 (C5B) stepping 0. - * Version 2 of longhaul is the same as v1, but adds voltage scaling. - * Present in Samuel 2 (steppings 1-7 only) (C5B), and Ezra (C5C) - * voltage scaling support has currently been disabled in this driver - * until we have code that gets it right. + * Version 2 of longhaul is backward compatible with v1, but adds + * LONGHAUL MSR for purpose of both frequency and voltage scaling. + * Present in Samuel 2 (steppings 1-7 only) (C5B), and Ezra (C5C). * Version 3 of longhaul got renamed to Powersaver and redesigned - * to use the POWERSAVER MSR at 0x110a. + * to use only the POWERSAVER MSR at 0x110a. * It is present in Ezra-T (C5M), Nehemiah (C5X) and above. * It's pretty much the same feature wise to longhaul v2, though * there is provision for scaling FSB too, but this doesn't work @@ -298,26 +297,19 @@ static void longhaul_setstate(unsigned int clock_ratio_index) /* * Longhaul v1. (Samuel[C5A] and Samuel2 stepping 0[C5B]) * Software controlled multipliers only. - * - * *NB* Until we get voltage scaling working v1 & v2 are the same code. - * Longhaul v2 appears in Samuel2 Steppings 1->7 [C5b] and Ezra [C5C] */ case TYPE_LONGHAUL_V1: - case TYPE_LONGHAUL_V2: do_longhaul1(clock_ratio_index); break; /* + * Longhaul v2 appears in Samuel2 Steppings 1->7 [C5B] and Ezra [C5C] + * * Longhaul v3 (aka Powersaver). (Ezra-T [C5M] & Nehemiah [C5N]) - * We can scale voltage with this too, but that's currently - * disabled until we come up with a decent 'match freq to voltage' - * algorithm. - * When we add voltage scaling, we will also need to do the - * voltage/freq setting in order depending on the direction - * of scaling (like we do in powernow-k7.c) * Nehemiah can do FSB scaling too, but this has never been proven * to work in practice. */ + case TYPE_LONGHAUL_V2: case TYPE_POWERSAVER: if (longhaul_flags & USE_ACPI_C3) { /* Don't allow wakeup */ @@ -342,6 +334,7 @@ static void longhaul_setstate(unsigned int clock_ratio_index) local_irq_restore(flags); preempt_enable(); + freqs.new = calc_speed(longhaul_get_cpu_mult()); cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); } @@ -471,6 +464,8 @@ static void __init longhaul_setup_voltagescaling(void) mV_vrm_table = &mV_vrm85[0]; } else { printk (KERN_INFO PFX "Mobile VRM\n"); + if (cpu_model < CPU_NEHEMIAH) + return; vrm_mV_table = &mobilevrm_mV[0]; mV_vrm_table = &mV_mobilevrm[0]; } @@ -656,6 +651,7 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) struct cpuinfo_x86 *c = cpu_data; char *cpuname=NULL; int ret; + u32 lo, hi; int vt8235_present; /* Check what we have on this motherboard */ @@ -669,16 +665,20 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) break; case 7: - longhaul_version = TYPE_LONGHAUL_V1; switch (c->x86_mask) { case 0: + longhaul_version = TYPE_LONGHAUL_V1; cpu_model = CPU_SAMUEL2; cpuname = "C3 'Samuel 2' [C5B]"; - /* Note, this is not a typo, early Samuel2's had Samuel1 ratios. */ - memcpy (clock_ratio, samuel1_clock_ratio, sizeof(samuel1_clock_ratio)); - memcpy (eblcr_table, samuel2_eblcr, sizeof(samuel2_eblcr)); + /* Note, this is not a typo, early Samuel2's had + * Samuel1 ratios. */ + memcpy(clock_ratio, samuel1_clock_ratio, + sizeof(samuel1_clock_ratio)); + memcpy(eblcr_table, samuel2_eblcr, + sizeof(samuel2_eblcr)); break; case 1 ... 15: + longhaul_version = TYPE_LONGHAUL_V2; if (c->x86_mask < 8) { cpu_model = CPU_SAMUEL2; cpuname = "C3 'Samuel 2' [C5B]"; @@ -686,8 +686,10 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) cpu_model = CPU_EZRA; cpuname = "C3 'Ezra' [C5C]"; } - memcpy (clock_ratio, ezra_clock_ratio, sizeof(ezra_clock_ratio)); - memcpy (eblcr_table, ezra_eblcr, sizeof(ezra_eblcr)); + memcpy(clock_ratio, ezra_clock_ratio, + sizeof(ezra_clock_ratio)); + memcpy(eblcr_table, ezra_eblcr, + sizeof(ezra_eblcr)); break; } break; @@ -728,6 +730,13 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) cpuname = "Unknown"; break; } + /* Check Longhaul ver. 2 */ + if (longhaul_version == TYPE_LONGHAUL_V2) { + rdmsr(MSR_VIA_LONGHAUL, lo, hi); + if (lo == 0 && hi == 0) + /* Looks like MSR isn't present */ + longhaul_version = TYPE_LONGHAUL_V1; + } printk (KERN_INFO PFX "VIA %s CPU detected. ", cpuname); switch (longhaul_version) { @@ -749,7 +758,7 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) NULL, (void *)&pr); /* Check ACPI support for C3 state */ - if (pr != NULL && longhaul_version == TYPE_POWERSAVER) { + if (pr != NULL && longhaul_version != TYPE_LONGHAUL_V1) { cx = &pr->power.states[ACPI_STATE_C3]; if (cx->address > 0 && cx->latency <= 1000) { longhaul_flags |= USE_ACPI_C3; -- cgit v1.2.3 From 9c57548f17806ffd8e4dc4f7973ce78bbfbc2079 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 15 Feb 2007 18:20:52 +0900 Subject: sh: rts7751r2d board updates. This tidies up some of the rts7751r2d mess and gets it booting again. Update the defconfig, too. Signed-off-by: Masayuki Hosokawa Signed-off-by: Paul Mundt --- arch/sh/boards/renesas/rts7751r2d/Makefile | 2 +- arch/sh/boards/renesas/rts7751r2d/io.c | 302 ---------------------------- arch/sh/boards/renesas/rts7751r2d/irq.c | 80 ++------ arch/sh/boards/renesas/rts7751r2d/setup.c | 123 ++++++------ arch/sh/cchips/voyagergx/irq.c | 70 +++---- arch/sh/cchips/voyagergx/setup.c | 4 +- arch/sh/configs/rts7751r2d_defconfig | 308 ++++++++++++++++++++++++----- arch/sh/kernel/cpu/sh4/setup-sh7750.c | 2 + arch/sh/kernel/io_generic.c | 12 +- 9 files changed, 386 insertions(+), 517 deletions(-) delete mode 100644 arch/sh/boards/renesas/rts7751r2d/io.c (limited to 'arch') diff --git a/arch/sh/boards/renesas/rts7751r2d/Makefile b/arch/sh/boards/renesas/rts7751r2d/Makefile index 833de1eac0e8..0d4c75a72be0 100644 --- a/arch/sh/boards/renesas/rts7751r2d/Makefile +++ b/arch/sh/boards/renesas/rts7751r2d/Makefile @@ -2,4 +2,4 @@ # Makefile for the RTS7751R2D specific parts of the kernel # -obj-y := setup.o io.o irq.o +obj-y := setup.o irq.o diff --git a/arch/sh/boards/renesas/rts7751r2d/io.c b/arch/sh/boards/renesas/rts7751r2d/io.c deleted file mode 100644 index f2507a804979..000000000000 --- a/arch/sh/boards/renesas/rts7751r2d/io.c +++ /dev/null @@ -1,302 +0,0 @@ -/* - * Copyright (C) 2001 Ian da Silva, Jeremy Siegel - * Based largely on io_se.c. - * - * I/O routine for Renesas Technology sales RTS7751R2D. - * - * Initial version only to support LAN access; some - * placeholder code from io_rts7751r2d.c left in with the - * expectation of later SuperIO and PCMCIA access. - */ -#include -#include -#include -#include -#include -#include - -/* - * The 7751R RTS7751R2D uses the built-in PCI controller (PCIC) - * of the 7751R processor, and has a SuperIO accessible via the PCI. - * The board also includes a PCMCIA controller on its memory bus, - * like the other Solution Engine boards. - */ - -static inline unsigned long port2adr(unsigned int port) -{ - if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6) - if (port == 0x3f6) - return (PA_AREA5_IO + 0x80c); - else - return (PA_AREA5_IO + 0x1000 + ((port-0x1f0) << 1)); - else - maybebadio((unsigned long)port); - - return port; -} - -static inline unsigned long port88796l(unsigned int port, int flag) -{ - unsigned long addr; - - if (flag) - addr = PA_AX88796L + ((port - AX88796L_IO_BASE) << 1); - else - addr = PA_AX88796L + ((port - AX88796L_IO_BASE) << 1) + 0x1000; - - return addr; -} - -/* The 7751R RTS7751R2D seems to have everything hooked */ -/* up pretty normally (nothing on high-bytes only...) so this */ -/* shouldn't be needed */ -static inline int shifted_port(unsigned long port) -{ - /* For IDE registers, value is not shifted */ - if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6) - return 0; - else - return 1; -} - -#if defined(CONFIG_NE2000) || defined(CONFIG_NE2000_MODULE) -#define CHECK_AX88796L_PORT(port) \ - ((port >= AX88796L_IO_BASE) && (port < (AX88796L_IO_BASE+0x20))) -#else -#define CHECK_AX88796L_PORT(port) (0) -#endif - -/* - * General outline: remap really low stuff [eventually] to SuperIO, - * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO) - * is mapped through the PCI IO window. Stuff with high bits (PXSEG) - * should be way beyond the window, and is used w/o translation for - * compatibility. - */ -unsigned char rts7751r2d_inb(unsigned long port) -{ - if (CHECK_AX88796L_PORT(port)) - return (*(volatile unsigned short *)port88796l(port, 0)) & 0xff; - else if (PXSEG(port)) - return *(volatile unsigned char *)port; - else if (is_pci_ioaddr(port) || shifted_port(port)) - return *(volatile unsigned char *)pci_ioaddr(port); - else - return (*(volatile unsigned short *)port2adr(port) & 0xff); -} - -unsigned char rts7751r2d_inb_p(unsigned long port) -{ - unsigned char v; - - if (CHECK_AX88796L_PORT(port)) - v = (*(volatile unsigned short *)port88796l(port, 0)) & 0xff; - else if (PXSEG(port)) - v = *(volatile unsigned char *)port; - else if (is_pci_ioaddr(port) || shifted_port(port)) - v = *(volatile unsigned char *)pci_ioaddr(port); - else - v = (*(volatile unsigned short *)port2adr(port) & 0xff); - - ctrl_delay(); - - return v; -} - -unsigned short rts7751r2d_inw(unsigned long port) -{ - if (CHECK_AX88796L_PORT(port)) - maybebadio(port); - else if (PXSEG(port)) - return *(volatile unsigned short *)port; - else if (is_pci_ioaddr(port) || shifted_port(port)) - return *(volatile unsigned short *)pci_ioaddr(port); - else - maybebadio(port); - - return 0; -} - -unsigned int rts7751r2d_inl(unsigned long port) -{ - if (CHECK_AX88796L_PORT(port)) - maybebadio(port); - else if (PXSEG(port)) - return *(volatile unsigned long *)port; - else if (is_pci_ioaddr(port) || shifted_port(port)) - return *(volatile unsigned long *)pci_ioaddr(port); - else - maybebadio(port); - - return 0; -} - -void rts7751r2d_outb(unsigned char value, unsigned long port) -{ - if (CHECK_AX88796L_PORT(port)) - *((volatile unsigned short *)port88796l(port, 0)) = value; - else if (PXSEG(port)) - *(volatile unsigned char *)port = value; - else if (is_pci_ioaddr(port) || shifted_port(port)) - *(volatile unsigned char *)pci_ioaddr(port) = value; - else - *(volatile unsigned short *)port2adr(port) = value; -} - -void rts7751r2d_outb_p(unsigned char value, unsigned long port) -{ - if (CHECK_AX88796L_PORT(port)) - *((volatile unsigned short *)port88796l(port, 0)) = value; - else if (PXSEG(port)) - *(volatile unsigned char *)port = value; - else if (is_pci_ioaddr(port) || shifted_port(port)) - *(volatile unsigned char *)pci_ioaddr(port) = value; - else - *(volatile unsigned short *)port2adr(port) = value; - - ctrl_delay(); -} - -void rts7751r2d_outw(unsigned short value, unsigned long port) -{ - if (CHECK_AX88796L_PORT(port)) - maybebadio(port); - else if (PXSEG(port)) - *(volatile unsigned short *)port = value; - else if (is_pci_ioaddr(port) || shifted_port(port)) - *(volatile unsigned short *)pci_ioaddr(port) = value; - else - maybebadio(port); -} - -void rts7751r2d_outl(unsigned int value, unsigned long port) -{ - if (CHECK_AX88796L_PORT(port)) - maybebadio(port); - else if (PXSEG(port)) - *(volatile unsigned long *)port = value; - else if (is_pci_ioaddr(port) || shifted_port(port)) - *(volatile unsigned long *)pci_ioaddr(port) = value; - else - maybebadio(port); -} - -void rts7751r2d_insb(unsigned long port, void *addr, unsigned long count) -{ - unsigned long a = (unsigned long)addr; - volatile __u8 *bp; - volatile __u16 *p; - - if (CHECK_AX88796L_PORT(port)) { - p = (volatile unsigned short *)port88796l(port, 0); - while (count--) - ctrl_outb(*p & 0xff, a++); - } else if (PXSEG(port)) - while (count--) - ctrl_outb(ctrl_inb(port), a++); - else if (is_pci_ioaddr(port) || shifted_port(port)) { - bp = (__u8 *)pci_ioaddr(port); - while (count--) - ctrl_outb(*bp, a++); - } else { - p = (volatile unsigned short *)port2adr(port); - while (count--) - ctrl_outb(*p & 0xff, a++); - } -} - -void rts7751r2d_insw(unsigned long port, void *addr, unsigned long count) -{ - unsigned long a = (unsigned long)addr; - volatile __u16 *p; - - if (CHECK_AX88796L_PORT(port)) - p = (volatile unsigned short *)port88796l(port, 1); - else if (PXSEG(port)) - p = (volatile unsigned short *)port; - else if (is_pci_ioaddr(port) || shifted_port(port)) - p = (volatile unsigned short *)pci_ioaddr(port); - else - p = (volatile unsigned short *)port2adr(port); - while (count--) - ctrl_outw(*p, a++); -} - -void rts7751r2d_insl(unsigned long port, void *addr, unsigned long count) -{ - if (CHECK_AX88796L_PORT(port)) - maybebadio(port); - else if (is_pci_ioaddr(port) || shifted_port(port)) { - unsigned long a = (unsigned long)addr; - - while (count--) { - ctrl_outl(ctrl_inl(pci_ioaddr(port)), a); - a += 4; - } - } else - maybebadio(port); -} - -void rts7751r2d_outsb(unsigned long port, const void *addr, unsigned long count) -{ - unsigned long a = (unsigned long)addr; - volatile __u8 *bp; - volatile __u16 *p; - - if (CHECK_AX88796L_PORT(port)) { - p = (volatile unsigned short *)port88796l(port, 0); - while (count--) - *p = ctrl_inb(a++); - } else if (PXSEG(port)) - while (count--) - ctrl_outb(a++, port); - else if (is_pci_ioaddr(port) || shifted_port(port)) { - bp = (__u8 *)pci_ioaddr(port); - while (count--) - *bp = ctrl_inb(a++); - } else { - p = (volatile unsigned short *)port2adr(port); - while (count--) - *p = ctrl_inb(a++); - } -} - -void rts7751r2d_outsw(unsigned long port, const void *addr, unsigned long count) -{ - unsigned long a = (unsigned long)addr; - volatile __u16 *p; - - if (CHECK_AX88796L_PORT(port)) - p = (volatile unsigned short *)port88796l(port, 1); - else if (PXSEG(port)) - p = (volatile unsigned short *)port; - else if (is_pci_ioaddr(port) || shifted_port(port)) - p = (volatile unsigned short *)pci_ioaddr(port); - else - p = (volatile unsigned short *)port2adr(port); - - while (count--) { - ctrl_outw(*p, a); - a += 2; - } -} - -void rts7751r2d_outsl(unsigned long port, const void *addr, unsigned long count) -{ - if (CHECK_AX88796L_PORT(port)) - maybebadio(port); - else if (is_pci_ioaddr(port) || shifted_port(port)) { - unsigned long a = (unsigned long)addr; - - while (count--) { - ctrl_outl(ctrl_inl(a), pci_ioaddr(port)); - a += 4; - } - } else - maybebadio(port); -} - -unsigned long rts7751r2d_isa_port2addr(unsigned long offset) -{ - return port2adr(offset); -} diff --git a/arch/sh/boards/renesas/rts7751r2d/irq.c b/arch/sh/boards/renesas/rts7751r2d/irq.c index cb0eb20d1b43..0bae9041aceb 100644 --- a/arch/sh/boards/renesas/rts7751r2d/irq.c +++ b/arch/sh/boards/renesas/rts7751r2d/irq.c @@ -9,7 +9,9 @@ * Atom Create Engineering Co., Ltd. 2002. */ #include +#include #include +#include #include #include @@ -22,79 +24,31 @@ static int mask_pos[] = {6, 11, 9, 8, 12, 10, 5, 4, 7, 14, 13, 0, 0, 0, 0}; extern int voyagergx_irq_demux(int irq); extern void setup_voyagergx_irq(void); -static void enable_rts7751r2d_irq(unsigned int irq); -static void disable_rts7751r2d_irq(unsigned int irq); - -/* shutdown is same as "disable" */ -#define shutdown_rts7751r2d_irq disable_rts7751r2d_irq - -static void ack_rts7751r2d_irq(unsigned int irq); -static void end_rts7751r2d_irq(unsigned int irq); - -static unsigned int startup_rts7751r2d_irq(unsigned int irq) +static void enable_rts7751r2d_irq(unsigned int irq) { - enable_rts7751r2d_irq(irq); - return 0; /* never anything pending */ + /* Set priority in IPR back to original value */ + ctrl_outw(ctrl_inw(IRLCNTR1) | (1 << mask_pos[irq]), IRLCNTR1); } static void disable_rts7751r2d_irq(unsigned int irq) { - unsigned short val; - unsigned short mask = 0xffff ^ (0x0001 << mask_pos[irq]); - /* Set the priority in IPR to 0 */ - val = ctrl_inw(IRLCNTR1); - val &= mask; - ctrl_outw(val, IRLCNTR1); -} - -static void enable_rts7751r2d_irq(unsigned int irq) -{ - unsigned short val; - unsigned short value = (0x0001 << mask_pos[irq]); - - /* Set priority in IPR back to original value */ - val = ctrl_inw(IRLCNTR1); - val |= value; - ctrl_outw(val, IRLCNTR1); + ctrl_outw(ctrl_inw(IRLCNTR1) & (0xffff ^ (1 << mask_pos[irq])), + IRLCNTR1); } int rts7751r2d_irq_demux(int irq) { - int demux_irq; - - demux_irq = voyagergx_irq_demux(irq); - return demux_irq; -} - -static void ack_rts7751r2d_irq(unsigned int irq) -{ - disable_rts7751r2d_irq(irq); + return voyagergx_irq_demux(irq); } -static void end_rts7751r2d_irq(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) - enable_rts7751r2d_irq(irq); -} - -static struct hw_interrupt_type rts7751r2d_irq_type = { - .typename = "RTS7751R2D IRQ", - .startup = startup_rts7751r2d_irq, - .shutdown = shutdown_rts7751r2d_irq, - .enable = enable_rts7751r2d_irq, - .disable = disable_rts7751r2d_irq, - .ack = ack_rts7751r2d_irq, - .end = end_rts7751r2d_irq, +static struct irq_chip rts7751r2d_irq_chip __read_mostly = { + .name = "rts7751r2d", + .mask = disable_rts7751r2d_irq, + .unmask = enable_rts7751r2d_irq, + .mask_ack = disable_rts7751r2d_irq, }; -static void make_rts7751r2d_irq(unsigned int irq) -{ - disable_irq_nosync(irq); - irq_desc[irq].chip = &rts7751r2d_irq_type; - disable_rts7751r2d_irq(irq); -} - /* * Initialize IRQ setting */ @@ -119,8 +73,12 @@ void __init init_rts7751r2d_IRQ(void) * IRL14=Extention #3 */ - for (i=0; i<15; i++) - make_rts7751r2d_irq(i); + for (i=0; i<15; i++) { + disable_irq_nosync(i); + set_irq_chip_and_handler_name(i, &rts7751r2d_irq_chip, + handle_level_irq, "level"); + enable_rts7751r2d_irq(i); + } setup_voyagergx_irq(); } diff --git a/arch/sh/boards/renesas/rts7751r2d/setup.c b/arch/sh/boards/renesas/rts7751r2d/setup.c index d97be1202245..44b42082a0af 100644 --- a/arch/sh/boards/renesas/rts7751r2d/setup.c +++ b/arch/sh/boards/renesas/rts7751r2d/setup.c @@ -1,8 +1,8 @@ /* * Renesas Technology Sales RTS7751R2D Support. * - * Copyright (C) 2002 Atom Create Engineering Co., Ltd. - * Copyright (C) 2004 - 2006 Paul Mundt + * Copyright (C) 2002 - 2006 Atom Create Engineering Co., Ltd. + * Copyright (C) 2004 - 2007 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -10,33 +10,13 @@ */ #include #include +#include #include #include #include -#include -#include +#include #include - -extern void heartbeat_rts7751r2d(void); -extern void init_rts7751r2d_IRQ(void); -extern int rts7751r2d_irq_demux(int irq); - -extern void *voyagergx_consistent_alloc(struct device *, size_t, dma_addr_t *, gfp_t); -extern int voyagergx_consistent_free(struct device *, size_t, void *, dma_addr_t); - -static struct plat_serial8250_port uart_platform_data[] = { - { - .membase = (void *)VOYAGER_UART_BASE, - .mapbase = VOYAGER_UART_BASE, - .iotype = UPIO_MEM, - .irq = VOYAGER_UART0_IRQ, - .flags = UPF_BOOT_AUTOCONF, - .regshift = 2, - .uartclk = (9600 * 16), - }, { - .flags = 0, - }, -}; +#include static void __init voyagergx_serial_init(void) { @@ -45,25 +25,72 @@ static void __init voyagergx_serial_init(void) /* * GPIO Control */ - val = inl(GPIO_MUX_HIGH); + val = readl((void __iomem *)GPIO_MUX_HIGH); val |= 0x00001fe0; - outl(val, GPIO_MUX_HIGH); + writel(val, (void __iomem *)GPIO_MUX_HIGH); /* * Power Mode Gate */ - val = inl(POWER_MODE0_GATE); + val = readl((void __iomem *)POWER_MODE0_GATE); val |= (POWER_MODE0_GATE_U0 | POWER_MODE0_GATE_U1); - outl(val, POWER_MODE0_GATE); + writel(val, (void __iomem *)POWER_MODE0_GATE); - val = inl(POWER_MODE1_GATE); + val = readl((void __iomem *)POWER_MODE1_GATE); val |= (POWER_MODE1_GATE_U0 | POWER_MODE1_GATE_U1); - outl(val, POWER_MODE1_GATE); + writel(val, (void __iomem *)POWER_MODE1_GATE); } +static struct resource cf_ide_resources[] = { + [0] = { + .start = PA_AREA5_IO + 0x1000, + .end = PA_AREA5_IO + 0x1000 + 0x08 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = PA_AREA5_IO + 0x80c, + .end = PA_AREA5_IO + 0x80c + 0x16 - 1, + .flags = IORESOURCE_MEM, + }, + [2] = { +#ifdef CONFIG_RTS7751R2D_REV11 + .start = 1, +#else + .start = 2, +#endif + .flags = IORESOURCE_IRQ, + }, +}; + +static struct pata_platform_info pata_info = { + .ioport_shift = 1, +}; + +static struct platform_device cf_ide_device = { + .name = "pata_platform", + .id = -1, + .num_resources = ARRAY_SIZE(cf_ide_resources), + .resource = cf_ide_resources, + .dev = { + .platform_data = &pata_info, + }, +}; + +static struct plat_serial8250_port uart_platform_data[] = { + { + .membase = (void __iomem *)VOYAGER_UART_BASE, + .mapbase = VOYAGER_UART_BASE, + .iotype = UPIO_MEM, + .irq = VOYAGER_UART0_IRQ, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .regshift = 2, + .uartclk = (9600 * 16), + } +}; + static struct platform_device uart_device = { .name = "serial8250", - .id = -1, + .id = PLAT8250_DEV_PLATFORM, .dev = { .platform_data = uart_platform_data, }, @@ -87,6 +114,7 @@ static struct platform_device heartbeat_device = { static struct platform_device *rts7751r2d_devices[] __initdata = { &uart_device, &heartbeat_device, + &cf_ide_device, }; static int __init rts7751r2d_devices_setup(void) @@ -94,6 +122,7 @@ static int __init rts7751r2d_devices_setup(void) return platform_add_devices(rts7751r2d_devices, ARRAY_SIZE(rts7751r2d_devices)); } +__initcall(rts7751r2d_devices_setup); static void rts7751r2d_power_off(void) { @@ -105,14 +134,17 @@ static void rts7751r2d_power_off(void) */ static void __init rts7751r2d_setup(char **cmdline_p) { - device_initcall(rts7751r2d_devices_setup); + u16 ver = ctrl_inw(PA_VERREG); + + printk(KERN_INFO "Renesas Technology Sales RTS7751R2D support.\n"); + + printk(KERN_INFO "FPGA version:%d (revision:%d)\n", + (ver >> 4) & 0xf, ver & 0xf); ctrl_outw(0x0000, PA_OUTPORT); pm_power_off = rts7751r2d_power_off; voyagergx_serial_init(); - - printk(KERN_INFO "Renesas Technology Sales RTS7751R2D support.\n"); } /* @@ -123,27 +155,6 @@ struct sh_machine_vector mv_rts7751r2d __initmv = { .mv_setup = rts7751r2d_setup, .mv_nr_irqs = 72, - .mv_inb = rts7751r2d_inb, - .mv_inw = rts7751r2d_inw, - .mv_inl = rts7751r2d_inl, - .mv_outb = rts7751r2d_outb, - .mv_outw = rts7751r2d_outw, - .mv_outl = rts7751r2d_outl, - - .mv_inb_p = rts7751r2d_inb_p, - .mv_inw_p = rts7751r2d_inw, - .mv_inl_p = rts7751r2d_inl, - .mv_outb_p = rts7751r2d_outb_p, - .mv_outw_p = rts7751r2d_outw, - .mv_outl_p = rts7751r2d_outl, - - .mv_insb = rts7751r2d_insb, - .mv_insw = rts7751r2d_insw, - .mv_insl = rts7751r2d_insl, - .mv_outsb = rts7751r2d_outsb, - .mv_outsw = rts7751r2d_outsw, - .mv_outsl = rts7751r2d_outsl, - .mv_init_irq = init_rts7751r2d_IRQ, .mv_irq_demux = rts7751r2d_irq_demux, diff --git a/arch/sh/cchips/voyagergx/irq.c b/arch/sh/cchips/voyagergx/irq.c index f7ea700d05ae..70f12907647f 100644 --- a/arch/sh/cchips/voyagergx/irq.c +++ b/arch/sh/cchips/voyagergx/irq.c @@ -28,21 +28,21 @@ static void disable_voyagergx_irq(unsigned int irq) unsigned long val; unsigned long mask = 1 << (irq - VOYAGER_IRQ_BASE); - pr_debug("disable_voyagergx_irq(%d): mask=%lx\n", irq, mask); - val = inl(VOYAGER_INT_MASK); - val &= ~mask; - outl(val, VOYAGER_INT_MASK); + pr_debug("disable_voyagergx_irq(%d): mask=%x\n", irq, mask); + val = readl((void __iomem *)VOYAGER_INT_MASK); + val &= ~mask; + writel(val, (void __iomem *)VOYAGER_INT_MASK); } static void enable_voyagergx_irq(unsigned int irq) { - unsigned long val; - unsigned long mask = 1 << (irq - VOYAGER_IRQ_BASE); + unsigned long val; + unsigned long mask = 1 << (irq - VOYAGER_IRQ_BASE); - pr_debug("disable_voyagergx_irq(%d): mask=%lx\n", irq, mask); - val = inl(VOYAGER_INT_MASK); - val |= mask; - outl(val, VOYAGER_INT_MASK); + pr_debug("disable_voyagergx_irq(%d): mask=%x\n", irq, mask); + val = readl((void __iomem *)VOYAGER_INT_MASK); + val |= mask; + writel(val, (void __iomem *)VOYAGER_INT_MASK); } static void mask_and_ack_voyagergx(unsigned int irq) @@ -68,20 +68,20 @@ static void shutdown_voyagergx_irq(unsigned int irq) } static struct hw_interrupt_type voyagergx_irq_type = { - .typename = "VOYAGERGX-IRQ", - .startup = startup_voyagergx_irq, - .shutdown = shutdown_voyagergx_irq, - .enable = enable_voyagergx_irq, - .disable = disable_voyagergx_irq, - .ack = mask_and_ack_voyagergx, - .end = end_voyagergx_irq, + .typename = "VOYAGERGX-IRQ", + .startup = startup_voyagergx_irq, + .shutdown = shutdown_voyagergx_irq, + .enable = enable_voyagergx_irq, + .disable = disable_voyagergx_irq, + .ack = mask_and_ack_voyagergx, + .end = end_voyagergx_irq, }; static irqreturn_t voyagergx_interrupt(int irq, void *dev_id) { printk(KERN_INFO "VoyagerGX: spurious interrupt, status: 0x%x\n", - inl(INT_STATUS)); + (unsigned int)readl((void __iomem *)INT_STATUS)); return IRQ_HANDLED; } @@ -93,13 +93,13 @@ static struct { void voyagergx_register_irq_demux(int irq, int (*demux)(int irq, void *dev), void *dev) { - voyagergx_demux[irq - VOYAGER_IRQ_BASE].func = demux; - voyagergx_demux[irq - VOYAGER_IRQ_BASE].dev = dev; + voyagergx_demux[irq - VOYAGER_IRQ_BASE].func = demux; + voyagergx_demux[irq - VOYAGER_IRQ_BASE].dev = dev; } void voyagergx_unregister_irq_demux(int irq) { - voyagergx_demux[irq - VOYAGER_IRQ_BASE].func = 0; + voyagergx_demux[irq - VOYAGER_IRQ_BASE].func = 0; } int voyagergx_irq_demux(int irq) @@ -107,31 +107,25 @@ int voyagergx_irq_demux(int irq) if (irq == IRQ_VOYAGER ) { unsigned long i = 0, bit __attribute__ ((unused)); - unsigned long val = inl(INT_STATUS); -#if 1 - if ( val & ( 1 << 1 )){ + unsigned long val = readl((void __iomem *)INT_STATUS); + + if (val & (1 << 1)) i = 1; - } else if ( val & ( 1 << 2 )){ + else if (val & (1 << 2)) i = 2; - } else if ( val & ( 1 << 6 )){ + else if (val & (1 << 6)) i = 6; - } else if( val & ( 1 << 10 )){ + else if (val & (1 << 10)) i = 10; - } else if( val & ( 1 << 11 )){ + else if (val & (1 << 11)) i = 11; - } else if( val & ( 1 << 12 )){ + else if (val & (1 << 12)) i = 12; - } else if( val & ( 1 << 17 )){ + else if (val & (1 << 17)) i = 17; - } else { + else printk("Unexpected IRQ irq = %d status = 0x%08lx\n", irq, val); - } - pr_debug("voyagergx_irq_demux %ld\n", i); -#else - for (bit = 1, i = 0 ; i < VOYAGER_IRQ_NUM ; bit <<= 1, i++) - if (val & bit) - break; -#endif + pr_debug("voyagergx_irq_demux %d \n", i); if (i < VOYAGER_IRQ_NUM) { irq = VOYAGER_IRQ_BASE + i; if (voyagergx_demux[i].func != 0) diff --git a/arch/sh/cchips/voyagergx/setup.c b/arch/sh/cchips/voyagergx/setup.c index 66b2fedd7ad9..33f03027c193 100644 --- a/arch/sh/cchips/voyagergx/setup.c +++ b/arch/sh/cchips/voyagergx/setup.c @@ -19,7 +19,7 @@ static int __init setup_voyagergx(void) { unsigned long val; - val = inl(DRAM_CTRL); + val = readl((void __iomem *)DRAM_CTRL); val |= (DRAM_CTRL_CPU_COLUMN_SIZE_256 | DRAM_CTRL_CPU_ACTIVE_PRECHARGE | DRAM_CTRL_CPU_RESET | @@ -29,7 +29,7 @@ static int __init setup_voyagergx(void) DRAM_CTRL_ACTIVE_PRECHARGE | DRAM_CTRL_RESET | DRAM_CTRL_REMAIN_ACTIVE); - outl(val, DRAM_CTRL); + writel(val, (void __iomem *)DRAM_CTRL); return 0; } diff --git a/arch/sh/configs/rts7751r2d_defconfig b/arch/sh/configs/rts7751r2d_defconfig index 099e98f14729..db6a02df5af6 100644 --- a/arch/sh/configs/rts7751r2d_defconfig +++ b/arch/sh/configs/rts7751r2d_defconfig @@ -1,15 +1,21 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18 -# Tue Oct 3 11:38:36 2006 +# Linux kernel version: 2.6.20 +# Thu Feb 15 17:17:29 2007 # CONFIG_SUPERH=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_GENERIC_TIME is not set +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -33,8 +39,8 @@ CONFIG_SYSVIPC=y # CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y @@ -97,10 +103,8 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_SH_73180_SOLUTION_ENGINE is not set # CONFIG_SH_7751_SYSTEMH is not set # CONFIG_SH_HP6XX is not set -# CONFIG_SH_EC3104 is not set # CONFIG_SH_SATURN is not set # CONFIG_SH_DREAMCAST is not set -# CONFIG_SH_BIGSUR is not set # CONFIG_SH_MPC1211 is not set # CONFIG_SH_SH03 is not set # CONFIG_SH_SECUREEDGE5410 is not set @@ -113,6 +117,9 @@ CONFIG_SH_RTS7751R2D=y # CONFIG_SH_LANDISK is not set # CONFIG_SH_TITAN is not set # CONFIG_SH_SHMIN is not set +# CONFIG_SH_7206_SOLUTION_ENGINE is not set +# CONFIG_SH_7619_SOLUTION_ENGINE is not set +# CONFIG_SH_ASDAP310 is not set # CONFIG_SH_UNKNOWN is not set # @@ -124,6 +131,12 @@ CONFIG_CPU_SH4=y # SH-2 Processor Support # # CONFIG_CPU_SUBTYPE_SH7604 is not set +# CONFIG_CPU_SUBTYPE_SH7619 is not set + +# +# SH-2A Processor Support +# +# CONFIG_CPU_SUBTYPE_SH7206 is not set # # SH-3 Processor Support @@ -159,12 +172,14 @@ CONFIG_CPU_SUBTYPE_SH7751R=y # # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set +# CONFIG_CPU_SUBTYPE_SH7785 is not set # # SH4AL-DSP Processor Support # # CONFIG_CPU_SUBTYPE_SH73180 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set # # Memory management options @@ -174,6 +189,9 @@ CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x04000000 CONFIG_VSYSCALL=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_64KB is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -183,6 +201,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 # # Cache configuration @@ -195,11 +214,14 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # Processor features # CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_CPU_BIG_ENDIAN is not set CONFIG_SH_FPU=y # CONFIG_SH_DSP is not set # CONFIG_SH_STORE_QUEUES is not set CONFIG_CPU_HAS_INTEVT=y +CONFIG_CPU_HAS_IPR_IRQ=y CONFIG_CPU_HAS_SR_RB=y +CONFIG_CPU_HAS_PTEA=y # # Timer support @@ -210,6 +232,8 @@ CONFIG_SH_TMU=y # RTS7751R2D options # CONFIG_RTS7751R2D_REV11=y +CONFIG_SH_TIMER_IRQ=16 +# CONFIG_NO_IDLE_HZ is not set CONFIG_SH_PCLK_FREQ=60000000 # @@ -231,11 +255,17 @@ CONFIG_VOYAGERGX=y # CONFIG_HD6446X_SERIES is not set CONFIG_HEARTBEAT=y +# +# Additional SuperH Device Drivers +# +# CONFIG_PUSH_SWITCH is not set + # # Kernel features # # CONFIG_HZ_100 is not set CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 # CONFIG_KEXEC is not set @@ -251,7 +281,7 @@ CONFIG_ZERO_PAGE_OFFSET=0x00010000 CONFIG_BOOT_LINK_OFFSET=0x00800000 # CONFIG_UBC_WAKEUP is not set CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="mem=64M console=ttySC0,115200 root=/dev/hda1" +CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1" # # Bus options @@ -260,7 +290,6 @@ CONFIG_PCI=y CONFIG_SH_PCIDMA_NONCOHERENT=y CONFIG_PCI_AUTO=y CONFIG_PCI_AUTO_UPDATE_RESOURCES=y -# CONFIG_PCI_MULTITHREAD_PROBE is not set # # PCCARD (PCMCIA/CardBus) support @@ -302,6 +331,7 @@ CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -319,11 +349,13 @@ CONFIG_IP_FIB_HASH=y # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set @@ -380,7 +412,7 @@ CONFIG_WIRELESS_EXT=y # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set +CONFIG_FW_LOADER=m # CONFIG_SYS_HYPERVISOR is not set # @@ -422,44 +454,145 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_ATA_OVER_ETH is not set # -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=4 -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives +# Misc devices # -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_IDE_TASK_IOCTL is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set # -# IDE chipset support/bugfixes +# ATA/ATAPI/MFM/RLL support # -CONFIG_IDE_GENERIC=y -# CONFIG_BLK_DEV_IDEPCI is not set -# CONFIG_IDE_ARM is not set -# CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set +# CONFIG_IDE is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set +CONFIG_SCSI=y +# CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set # # Serial ATA (prod) and Parallel ATA (experimental) drivers # -# CONFIG_ATA is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SVW is not set +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set +CONFIG_PATA_PLATFORM=y # # Multi-device support (RAID and LVM) @@ -470,6 +603,9 @@ CONFIG_IDE_GENERIC=y # Fusion MPT device support # # CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -540,6 +676,7 @@ CONFIG_8139TOO=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set +# CONFIG_SC92031 is not set # # Ethernet (1000 Mbit) @@ -559,14 +696,17 @@ CONFIG_8139TOO=y # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set # # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set # # Token Ring devices @@ -611,6 +751,7 @@ CONFIG_NET_WIRELESS=y # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set +# CONFIG_NET_FC is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set @@ -646,14 +787,23 @@ CONFIG_NET_WIRELESS=y # # Serial drivers # -# CONFIG_SERIAL_8250 is not set +CONFIG_SERIAL_8250=y +# CONFIG_SERIAL_8250_CONSOLE is not set +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set # # Non-8250 serial port support # -# CONFIG_SERIAL_SH_SCI is not set +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=1 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set -# CONFIG_UNIX98_PTYS is not set +CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -671,10 +821,6 @@ CONFIG_HW_RANDOM=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set @@ -682,7 +828,6 @@ CONFIG_HW_RANDOM=y # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -698,6 +843,7 @@ CONFIG_HW_RANDOM=y # # Dallas's 1-wire bus # +# CONFIG_W1 is not set # # Hardware Monitoring support @@ -706,18 +852,14 @@ CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_HWMON_DEBUG_CHIP is not set -# -# Misc devices -# - # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -759,7 +901,6 @@ CONFIG_SND_VERBOSE_PROCFS=y CONFIG_SND_MPU401_UART=m CONFIG_SND_OPL3_LIB=m CONFIG_SND_AC97_CODEC=m -CONFIG_SND_AC97_BUS=m # CONFIG_SND_DUMMY is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set @@ -782,6 +923,18 @@ CONFIG_SND_AC97_BUS=m # CONFIG_SND_CMIPCI is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set +# CONFIG_SND_DARLA20 is not set +# CONFIG_SND_GINA20 is not set +# CONFIG_SND_LAYLA20 is not set +# CONFIG_SND_DARLA24 is not set +# CONFIG_SND_GINA24 is not set +# CONFIG_SND_LAYLA24 is not set +# CONFIG_SND_MONA is not set +# CONFIG_SND_MIA is not set +# CONFIG_SND_ECHO3G is not set +# CONFIG_SND_INDIGO is not set +# CONFIG_SND_INDIGOIO is not set +# CONFIG_SND_INDIGODJ is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set @@ -801,6 +954,7 @@ CONFIG_SND_AC97_BUS=m # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set # CONFIG_SND_PCXHR is not set +# CONFIG_SND_RIPTIDE is not set # CONFIG_SND_RME32 is not set # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set @@ -812,18 +966,23 @@ CONFIG_SND_AC97_BUS=m CONFIG_SND_YMFPCI=m # CONFIG_SND_AC97_POWER_SAVE is not set +# +# SoC audio support +# +# CONFIG_SND_SOC is not set + # # Open Sound System # CONFIG_SOUND_PRIME=m -# CONFIG_OSS_OBSOLETE_DRIVER is not set +# CONFIG_OBSOLETE_OSS is not set # CONFIG_SOUND_BT878 is not set -# CONFIG_SOUND_ES1371 is not set # CONFIG_SOUND_ICH is not set # CONFIG_SOUND_TRIDENT is not set # CONFIG_SOUND_MSNDCLAS is not set # CONFIG_SOUND_MSNDPIN is not set # CONFIG_SOUND_VIA82CXXX is not set +CONFIG_AC97_BUS=m # # USB support @@ -872,7 +1031,29 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # Real Time Clock # -# CONFIG_RTC_CLASS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set + +# +# RTC drivers +# +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +CONFIG_RTC_DRV_SH=y +# CONFIG_RTC_DRV_TEST is not set +# CONFIG_RTC_DRV_V3020 is not set # # DMA Engine support @@ -887,6 +1068,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y # DMA Devices # +# +# Auxiliary Display support +# + +# +# Virtualization +# + # # File systems # @@ -894,10 +1083,12 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_MINIX_FS=y # CONFIG_ROMFS_FS is not set @@ -932,7 +1123,8 @@ CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y -# CONFIG_TMPFS is not set +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y @@ -1017,6 +1209,11 @@ CONFIG_NLS_CODEPAGE_932=y # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + # # Profiling support # @@ -1026,16 +1223,20 @@ CONFIG_OPROFILE=y # # Kernel hacking # +CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_FS is not set # CONFIG_SH_STANDARD_BIOS is not set -# CONFIG_EARLY_SCIF_CONSOLE is not set +CONFIG_EARLY_SCIF_CONSOLE=y +CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe80000 +CONFIG_EARLY_PRINTK=y # CONFIG_KGDB is not set # @@ -1052,8 +1253,11 @@ CONFIG_LOG_BUF_SHIFT=14 # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7750.c b/arch/sh/kernel/cpu/sh4/setup-sh7750.c index aa26245f0344..6f8f458912c7 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7750.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7750.c @@ -46,11 +46,13 @@ static struct platform_device rtc_device = { static struct plat_sci_port sci_platform_data[] = { { +#ifndef CONFIG_SH_RTS7751R2D .mapbase = 0xffe00000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCI, .irqs = { 23, 24, 25, 0 }, }, { +#endif .mapbase = 0xffe80000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, diff --git a/arch/sh/kernel/io_generic.c b/arch/sh/kernel/io_generic.c index 28ec7487de8c..66626c03e1ee 100644 --- a/arch/sh/kernel/io_generic.c +++ b/arch/sh/kernel/io_generic.c @@ -1,9 +1,8 @@ -/* $Id: io_generic.c,v 1.2 2003/05/04 19:29:53 lethal Exp $ - * - * linux/arch/sh/kernel/io_generic.c +/* + * arch/sh/kernel/io_generic.c * * Copyright (C) 2000 Niibe Yutaka - * Copyright (C) 2005 Paul Mundt + * Copyright (C) 2005 - 2007 Paul Mundt * * Generic I/O routine. These can be used where a machine specific version * is not required. @@ -13,8 +12,9 @@ * for more details. */ #include -#include +#include #include +#include #ifdef CONFIG_CPU_SH3 /* SH3 has a PCMCIA bug that needs a dummy read from area 6 for a @@ -96,6 +96,7 @@ void generic_insw(unsigned long port, void *dst, unsigned long count) while (count--) *buf++ = *port_addr; + flush_dcache_all(); dummy_read(); } @@ -170,6 +171,7 @@ void generic_outsw(unsigned long port, const void *src, unsigned long count) while (count--) *port_addr = *buf++; + flush_dcache_all(); dummy_read(); } -- cgit v1.2.3 From 9f271d576a79f74a543c4099a014d8d4eafa737d Mon Sep 17 00:00:00 2001 From: "Zhang, Yanmin" Date: Fri, 9 Feb 2007 11:29:51 +0800 Subject: ATA convert GSI to irq on ia64 If an ATA drive uses legacy mode, ata driver will choose 14 and 15 as the fixed irq number. On ia64 platform, such numbers are GSI and should be converted to irq vector. Below patch against kernel 2.6.20 fixes it. Signed-off-by: Zhang Yanmin Signed-off-by: Jeff Garzik --- arch/ia64/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index db185f34e341..d51f0f11f7f9 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -22,6 +22,7 @@ config IA64 config 64BIT bool + select ATA_NONSTANDARD if ATA default y config ZONE_DMA -- cgit v1.2.3 From fde5efd0e50e026f3f69629fc5790a4f0533dcaa Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Wed, 7 Feb 2007 12:20:01 -0800 Subject: [POWERPC] PS3: System manager support Add PS3 system manager support and the ppc_md routines restart() and power_off(). The system manager provides an event notification mechanism for reporting events like thermal alert and button presses. It also provides support to control system shutdown and startup. Signed-off-by: Geoff Levand Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/ps3/Kconfig | 10 ++++++++++ arch/powerpc/platforms/ps3/setup.c | 27 +++++++++++++++++++++++---- 2 files changed, 33 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/ps3/Kconfig b/arch/powerpc/platforms/ps3/Kconfig index 4be3943d1c0d..d270a1e374d5 100644 --- a/arch/powerpc/platforms/ps3/Kconfig +++ b/arch/powerpc/platforms/ps3/Kconfig @@ -62,4 +62,14 @@ config PS3_PS3AV This support is required for graphics and sound. In general, all users will say Y or M. +config PS3_SYS_MANAGER + bool "PS3 System Manager driver" + select PS3_VUART + default y + help + Include support for the PS3 System Manager. + + This support is required for system control. In + general, all users will say Y. + endmenu diff --git a/arch/powerpc/platforms/ps3/setup.c b/arch/powerpc/platforms/ps3/setup.c index 13d669a8ecae..ac5df9688dcb 100644 --- a/arch/powerpc/platforms/ps3/setup.c +++ b/arch/powerpc/platforms/ps3/setup.c @@ -42,6 +42,10 @@ #define DBG(fmt...) do{if(0)printk(fmt);}while(0) #endif +#if !defined(CONFIG_SMP) +static void smp_send_stop(void) {} +#endif + int ps3_get_firmware_version(union ps3_firmware_version *v) { int result = lv1_get_version_info(&v->raw); @@ -66,22 +70,35 @@ static void ps3_power_save(void) lv1_pause(0); } +static void ps3_restart(char *cmd) +{ + DBG("%s:%d cmd '%s'\n", __func__, __LINE__, cmd); + + smp_send_stop(); + ps3_sys_manager_restart(); /* never returns */ +} + +static void ps3_power_off(void) +{ + DBG("%s:%d\n", __func__, __LINE__); + + smp_send_stop(); + ps3_sys_manager_power_off(); /* never returns */ +} + static void ps3_panic(char *str) { DBG("%s:%d %s\n", __func__, __LINE__, str); -#ifdef CONFIG_SMP smp_send_stop(); -#endif printk("\n"); printk(" System does not reboot automatically.\n"); printk(" Please press POWER button.\n"); printk("\n"); - for (;;) ; + while(1); } - static void prealloc(struct ps3_prealloc *p) { if (!p->size) @@ -219,6 +236,8 @@ define_machine(ps3) { .get_rtc_time = ps3_get_rtc_time, .calibrate_decr = ps3_calibrate_decr, .progress = ps3_progress, + .restart = ps3_restart, + .power_off = ps3_power_off, #if defined(CONFIG_KEXEC) .kexec_cpu_down = ps3_kexec_cpu_down, .machine_kexec = ps3_machine_kexec, -- cgit v1.2.3 From 0e8266437c62f4848676ea6e87a1ff10367502a9 Mon Sep 17 00:00:00 2001 From: Christian Krafft Date: Wed, 14 Feb 2007 14:09:45 +0100 Subject: [POWERPC] Add PMI driver for cell blade This adds driver code for the PMI device found in future IBM products. PMI stands for "Platform Management Interrupt" and is a way to communicate with the BMC (Baseboard Management Controller). It provides bidirectional communication with a low latency. Signed-off-by: Christian Krafft Acked-by: Arnd Bergmann Acked-by: Heiko J Schick Signed-off-by: Paul Mackerras --- arch/powerpc/Kconfig | 9 ++ arch/powerpc/configs/cell_defconfig | 1 + arch/powerpc/sysdev/Makefile | 1 + arch/powerpc/sysdev/pmi.c | 305 ++++++++++++++++++++++++++++++++++++ 4 files changed, 316 insertions(+) create mode 100644 arch/powerpc/sysdev/pmi.c (limited to 'arch') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 340d9beab6d1..6dfbd52694ab 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -620,6 +620,15 @@ config RTAS_FLASH tristate "Firmware flash interface" depends on PPC64 && RTAS_PROC +config PPC_PMI + tristate "Support for PMI" + depends PPC_IBM_CELL_BLADE + help + PMI (Platform Management Interrupt) is a way to + communicate with the BMC (Baseboard Mangement Controller). + It is used in some IBM Cell blades. + default m + config MMIO_NVRAM bool default n diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig index e956548da00c..24367319ce24 100644 --- a/arch/powerpc/configs/cell_defconfig +++ b/arch/powerpc/configs/cell_defconfig @@ -147,6 +147,7 @@ CONFIG_PPC_RTAS=y # CONFIG_RTAS_ERROR_LOGGING is not set CONFIG_RTAS_PROC=y CONFIG_RTAS_FLASH=y +CONFIG_PPC_PMI=m CONFIG_MMIO_NVRAM=y # CONFIG_PPC_MPC106 is not set # CONFIG_PPC_970_NAP is not set diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index 85dcdf178415..26ca3ffbc1de 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -7,6 +7,7 @@ obj-$(CONFIG_PPC_INDIRECT_PCI) += indirect_pci.o obj-$(CONFIG_PPC_MPC106) += grackle.o obj-$(CONFIG_PPC_DCR) += dcr.o obj-$(CONFIG_PPC_DCR_NATIVE) += dcr-low.o +obj-$(CONFIG_PPC_PMI) += pmi.o obj-$(CONFIG_U3_DART) += dart_iommu.o obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o obj-$(CONFIG_FSL_SOC) += fsl_soc.o diff --git a/arch/powerpc/sysdev/pmi.c b/arch/powerpc/sysdev/pmi.c new file mode 100644 index 000000000000..a5282011d39e --- /dev/null +++ b/arch/powerpc/sysdev/pmi.c @@ -0,0 +1,305 @@ +/* + * pmi driver + * + * (C) Copyright IBM Deutschland Entwicklung GmbH 2005 + * + * PMI (Platform Management Interrupt) is a way to communicate + * with the BMC (Baseboard Management Controller) via interrupts. + * Unlike IPMI it is bidirectional and has a low latency. + * + * Author: Christian Krafft + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include + +#include +#include +#include +#include + + +struct pmi_data { + struct list_head handler; + spinlock_t handler_spinlock; + spinlock_t pmi_spinlock; + struct mutex msg_mutex; + pmi_message_t msg; + struct completion *completion; + struct of_device *dev; + int irq; + u8 __iomem *pmi_reg; + struct work_struct work; +}; + + + +static void __iomem *of_iomap(struct device_node *np) +{ + struct resource res; + + if (of_address_to_resource(np, 0, &res)) + return NULL; + + pr_debug("Resource start: 0x%lx\n", res.start); + pr_debug("Resource end: 0x%lx\n", res.end); + + return ioremap(res.start, 1 + res.end - res.start); +} + + +static int pmi_irq_handler(int irq, void *dev_id) +{ + struct pmi_data *data; + u8 type; + int rc; + + data = dev_id; + + spin_lock(&data->pmi_spinlock); + + type = ioread8(data->pmi_reg + PMI_READ_TYPE); + pr_debug("pmi: got message of type %d\n", type); + + if (type & PMI_ACK && !data->completion) { + printk(KERN_WARNING "pmi: got unexpected ACK message.\n"); + rc = -EIO; + goto unlock; + } + + if (data->completion && !(type & PMI_ACK)) { + printk(KERN_WARNING "pmi: expected ACK, but got %d\n", type); + rc = -EIO; + goto unlock; + } + + data->msg.type = type; + data->msg.data0 = ioread8(data->pmi_reg + PMI_READ_DATA0); + data->msg.data1 = ioread8(data->pmi_reg + PMI_READ_DATA1); + data->msg.data2 = ioread8(data->pmi_reg + PMI_READ_DATA2); + rc = 0; +unlock: + spin_unlock(&data->pmi_spinlock); + + if (rc == -EIO) { + rc = IRQ_HANDLED; + goto out; + } + + if (data->msg.type & PMI_ACK) { + complete(data->completion); + rc = IRQ_HANDLED; + goto out; + } + + schedule_work(&data->work); + + rc = IRQ_HANDLED; +out: + return rc; +} + + +static struct of_device_id pmi_match[] = { + { .type = "ibm,pmi", .name = "ibm,pmi" }, + {}, +}; + +MODULE_DEVICE_TABLE(of, pmi_match); + +static void pmi_notify_handlers(struct work_struct *work) +{ + struct pmi_data *data; + struct pmi_handler *handler; + + data = container_of(work, struct pmi_data, work); + + spin_lock(&data->handler_spinlock); + list_for_each_entry(handler, &data->handler, node) { + pr_debug(KERN_INFO "pmi: notifying handler %p\n", handler); + if (handler->type == data->msg.type) + handler->handle_pmi_message(data->dev, data->msg); + } + spin_unlock(&data->handler_spinlock); +} + +static int pmi_of_probe(struct of_device *dev, + const struct of_device_id *match) +{ + struct device_node *np = dev->node; + struct pmi_data *data; + int rc; + + data = kzalloc(sizeof(struct pmi_data), GFP_KERNEL); + if (!data) { + printk(KERN_ERR "pmi: could not allocate memory.\n"); + rc = -ENOMEM; + goto out; + } + + data->pmi_reg = of_iomap(np); + if (!data->pmi_reg) { + printk(KERN_ERR "pmi: invalid register address.\n"); + rc = -EFAULT; + goto error_cleanup_data; + } + + INIT_LIST_HEAD(&data->handler); + + mutex_init(&data->msg_mutex); + spin_lock_init(&data->pmi_spinlock); + spin_lock_init(&data->handler_spinlock); + + INIT_WORK(&data->work, pmi_notify_handlers); + + dev->dev.driver_data = data; + data->dev = dev; + + data->irq = irq_of_parse_and_map(np, 0); + if (data->irq == NO_IRQ) { + printk(KERN_ERR "pmi: invalid interrupt.\n"); + rc = -EFAULT; + goto error_cleanup_iomap; + } + + rc = request_irq(data->irq, pmi_irq_handler, 0, "pmi", data); + if (rc) { + printk(KERN_ERR "pmi: can't request IRQ %d: returned %d\n", + data->irq, rc); + goto error_cleanup_iomap; + } + + printk(KERN_INFO "pmi: found pmi device at addr %p.\n", data->pmi_reg); + + goto out; + +error_cleanup_iomap: + iounmap(data->pmi_reg); + +error_cleanup_data: + kfree(data); + +out: + return rc; +} + +static int pmi_of_remove(struct of_device *dev) +{ + struct pmi_data *data; + struct pmi_handler *handler, *tmp; + + data = dev->dev.driver_data; + + free_irq(data->irq, data); + iounmap(data->pmi_reg); + + spin_lock(&data->handler_spinlock); + + list_for_each_entry_safe(handler, tmp, &data->handler, node) + list_del(&handler->node); + + spin_unlock(&data->handler_spinlock); + + kfree(dev->dev.driver_data); + + return 0; +} + +static struct of_platform_driver pmi_of_platform_driver = { + .name = "pmi", + .match_table = pmi_match, + .probe = pmi_of_probe, + .remove = pmi_of_remove +}; + +static int __init pmi_module_init(void) +{ + return of_register_platform_driver(&pmi_of_platform_driver); +} +module_init(pmi_module_init); + +static void __exit pmi_module_exit(void) +{ + of_unregister_platform_driver(&pmi_of_platform_driver); +} +module_exit(pmi_module_exit); + +void pmi_send_message(struct of_device *device, pmi_message_t msg) +{ + struct pmi_data *data; + unsigned long flags; + DECLARE_COMPLETION_ONSTACK(completion); + + data = device->dev.driver_data; + + mutex_lock(&data->msg_mutex); + + data->msg = msg; + pr_debug("pmi_send_message: msg is %08x\n", *(u32*)&msg); + + data->completion = &completion; + + spin_lock_irqsave(&data->pmi_spinlock, flags); + iowrite8(msg.data0, data->pmi_reg + PMI_WRITE_DATA0); + iowrite8(msg.data1, data->pmi_reg + PMI_WRITE_DATA1); + iowrite8(msg.data2, data->pmi_reg + PMI_WRITE_DATA2); + iowrite8(msg.type, data->pmi_reg + PMI_WRITE_TYPE); + spin_unlock_irqrestore(&data->pmi_spinlock, flags); + + pr_debug("pmi_send_message: wait for completion\n"); + + wait_for_completion_interruptible_timeout(data->completion, + PMI_TIMEOUT); + + data->completion = NULL; + + mutex_unlock(&data->msg_mutex); +} +EXPORT_SYMBOL_GPL(pmi_send_message); + +void pmi_register_handler(struct of_device *device, + struct pmi_handler *handler) +{ + struct pmi_data *data; + data = device->dev.driver_data; + + spin_lock(&data->handler_spinlock); + list_add_tail(&handler->node, &data->handler); + spin_unlock(&data->handler_spinlock); +} +EXPORT_SYMBOL_GPL(pmi_register_handler); + +void pmi_unregister_handler(struct of_device *device, + struct pmi_handler *handler) +{ + struct pmi_data *data; + + pr_debug("pmi: unregistering handler %p\n", handler); + + data = device->dev.driver_data; + + spin_lock(&data->handler_spinlock); + list_del(&handler->node); + spin_unlock(&data->handler_spinlock); +} +EXPORT_SYMBOL_GPL(pmi_unregister_handler); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Christian Krafft "); +MODULE_DESCRIPTION("IBM Platform Management Interrupt driver"); -- cgit v1.2.3 From 087d7ecd5273b480d13f4309a159842700afe276 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 12 Feb 2007 16:20:18 +0100 Subject: [POWERPC] mpic: set IPIs to be per-CPU This patch changes the MPIC IPIs to be per-CPU to avoid getting a warning ("Cannot set affinity for irq 251") when taking a CPU offline via sysfs or during suspend. Signed-off-by: Johannes Berg Signed-off-by: Paul Mackerras --- arch/powerpc/sysdev/mpic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 4e54a09dd33b..bcfb900481f8 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -1370,7 +1370,7 @@ void mpic_request_ipis(void) printk(KERN_ERR "Failed to map IPI %d\n", i); break; } - request_irq(vipi, mpic_ipi_action, IRQF_DISABLED, + request_irq(vipi, mpic_ipi_action, IRQF_DISABLED|IRQF_PERCPU, ipi_names[i], mpic); } } -- cgit v1.2.3 From 2333eae215442768478d7661d372ff017e3f0151 Mon Sep 17 00:00:00 2001 From: Ishizaki Kou Date: Wed, 14 Feb 2007 15:55:14 +0900 Subject: [POWERPC] celleb: fix CONFIG_KEXEC dependency celleb_kexec_cpu_down() depends on CONFIG_KEXEC. Signed-off-by: Kou Ishizaki Acked-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/celleb/setup.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/platforms/celleb/setup.c b/arch/powerpc/platforms/celleb/setup.c index 1de63acfda87..5f4d0d933238 100644 --- a/arch/powerpc/platforms/celleb/setup.c +++ b/arch/powerpc/platforms/celleb/setup.c @@ -137,10 +137,12 @@ static int celleb_check_legacy_ioport(unsigned int baseport) return -ENODEV; } +#ifdef CONFIG_KEXEC static void celleb_kexec_cpu_down(int crash, int secondary) { beatic_deinit_IRQ(); } +#endif static struct of_device_id celleb_bus_ids[] = { { .type = "scc", }, -- cgit v1.2.3 From 89680a8c3c35a3e9a7e97fbe66a34b0a73e221d1 Mon Sep 17 00:00:00 2001 From: Ishizaki Kou Date: Wed, 14 Feb 2007 15:59:15 +0900 Subject: [POWERPC] celleb: fix scc_uhc.c dependency scc_uhc.c depends on CONFIG_PCI, not CONFIG_USB. Because CONFIG_PCI is always "y" on Celleb platform, we move scc_uhc.o to obj-y. Signed-off-by: Kou Ishizaki Acked-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/celleb/Makefile | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/celleb/Makefile b/arch/powerpc/platforms/celleb/Makefile index 3baf658ac543..f4f82520dc4f 100644 --- a/arch/powerpc/platforms/celleb/Makefile +++ b/arch/powerpc/platforms/celleb/Makefile @@ -1,9 +1,8 @@ obj-y += interrupt.o iommu.o setup.o \ htab.o beat.o pci.o \ - scc_epci.o hvCall.o + scc_epci.o scc_uhc.o hvCall.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_PPC_UDBG_BEAT) += udbg_beat.o -obj-$(CONFIG_USB) += scc_uhc.o obj-$(CONFIG_HAS_TXX9_SERIAL) += scc_sio.o obj-$(CONFIG_SPU_BASE) += spu_priv1.o -- cgit v1.2.3 From 32aed2a5ce31dc8f42811a0e74020f230241165a Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Wed, 14 Feb 2007 15:29:07 -0600 Subject: [POWERPC] Delete boot-cpu property from all DTS files The 'linux,boot-cpu' property is obsolete, so remove it from all of the DTS files and from booting-without-of.txt. The boot CPU is actually defined in the device tree header, and U-Boot sets that field. The device tree compiler also complains if the property exists. Signed-off-by: Timur Tabi Signed-off-by: Stuart Yoder Acked-by: David Gibson Signed-off-by: Paul Mackerras --- arch/powerpc/boot/dts/kuroboxHD.dts | 1 - arch/powerpc/boot/dts/kuroboxHG.dts | 1 - arch/powerpc/boot/dts/mpc7448hpc2.dts | 1 - arch/powerpc/boot/dts/mpc8272ads.dts | 1 - arch/powerpc/boot/dts/mpc8323emds.dts | 1 - arch/powerpc/boot/dts/mpc8360emds.dts | 1 - arch/powerpc/boot/dts/mpc8560ads.dts | 1 - arch/powerpc/boot/dts/mpc8641_hpcn.dts | 1 - arch/powerpc/boot/dts/mpc866ads.dts | 1 - arch/powerpc/boot/dts/mpc885ads.dts | 1 - 10 files changed, 10 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/boot/dts/kuroboxHD.dts b/arch/powerpc/boot/dts/kuroboxHD.dts index 096e94ac415f..b89791802e86 100644 --- a/arch/powerpc/boot/dts/kuroboxHD.dts +++ b/arch/powerpc/boot/dts/kuroboxHD.dts @@ -35,7 +35,6 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHD.dtb -V 16 kuroboxHD.dts" PowerPC,603e { /* Really 8241 */ linux,phandle = <2100>; - linux,boot-cpu; device_type = "cpu"; reg = <0>; clock-frequency = ; /* Fixed by bootwrapper */ diff --git a/arch/powerpc/boot/dts/kuroboxHG.dts b/arch/powerpc/boot/dts/kuroboxHG.dts index d06b0b018899..753102752d8b 100644 --- a/arch/powerpc/boot/dts/kuroboxHG.dts +++ b/arch/powerpc/boot/dts/kuroboxHG.dts @@ -35,7 +35,6 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHG.dtb -V 16 kuroboxHG.dts" PowerPC,603e { /* Really 8241 */ linux,phandle = <2100>; - linux,boot-cpu; device_type = "cpu"; reg = <0>; clock-frequency = ; /* Fixed by bootwrapper */ diff --git a/arch/powerpc/boot/dts/mpc7448hpc2.dts b/arch/powerpc/boot/dts/mpc7448hpc2.dts index c4d9562cbaad..41d0720c5900 100644 --- a/arch/powerpc/boot/dts/mpc7448hpc2.dts +++ b/arch/powerpc/boot/dts/mpc7448hpc2.dts @@ -36,7 +36,6 @@ bus-frequency = <0>; // From U-Boot 32-bit; linux,phandle = <201>; - linux,boot-cpu; }; }; diff --git a/arch/powerpc/boot/dts/mpc8272ads.dts b/arch/powerpc/boot/dts/mpc8272ads.dts index 26b44f7513dc..260b2e447779 100644 --- a/arch/powerpc/boot/dts/mpc8272ads.dts +++ b/arch/powerpc/boot/dts/mpc8272ads.dts @@ -34,7 +34,6 @@ clock-frequency = <0>; 32-bit; linux,phandle = <201>; - linux,boot-cpu; }; }; diff --git a/arch/powerpc/boot/dts/mpc8323emds.dts b/arch/powerpc/boot/dts/mpc8323emds.dts index fa7ef24d205b..57a3665f82ed 100644 --- a/arch/powerpc/boot/dts/mpc8323emds.dts +++ b/arch/powerpc/boot/dts/mpc8323emds.dts @@ -34,7 +34,6 @@ clock-frequency = <0>; 32-bit; linux,phandle = <201>; - linux,boot-cpu; }; }; diff --git a/arch/powerpc/boot/dts/mpc8360emds.dts b/arch/powerpc/boot/dts/mpc8360emds.dts index 9022192155b9..303bd668deb7 100644 --- a/arch/powerpc/boot/dts/mpc8360emds.dts +++ b/arch/powerpc/boot/dts/mpc8360emds.dts @@ -39,7 +39,6 @@ clock-frequency = <1F78A400>; 32-bit; linux,phandle = <201>; - linux,boot-cpu; }; }; diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts index 119bd5d3a834..c74d6ebc5c8a 100644 --- a/arch/powerpc/boot/dts/mpc8560ads.dts +++ b/arch/powerpc/boot/dts/mpc8560ads.dts @@ -35,7 +35,6 @@ clock-frequency = <312c8040>; 32-bit; linux,phandle = <201>; - linux,boot-cpu; }; }; diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts index f0c7731743ea..8c75e4e1258f 100644 --- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts +++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts @@ -32,7 +32,6 @@ bus-frequency = <0>; // From uboot clock-frequency = <0>; // From uboot 32-bit; - linux,boot-cpu; }; PowerPC,8641@1 { device_type = "cpu"; diff --git a/arch/powerpc/boot/dts/mpc866ads.dts b/arch/powerpc/boot/dts/mpc866ads.dts index 5d4005239b83..2b56b5df451a 100644 --- a/arch/powerpc/boot/dts/mpc866ads.dts +++ b/arch/powerpc/boot/dts/mpc866ads.dts @@ -37,7 +37,6 @@ interrupts = ; // decrementer interrupt interrupt-parent = ; linux,phandle = <201>; - linux,boot-cpu; }; }; diff --git a/arch/powerpc/boot/dts/mpc885ads.dts b/arch/powerpc/boot/dts/mpc885ads.dts index cf1a19f962c5..faecd08c54da 100644 --- a/arch/powerpc/boot/dts/mpc885ads.dts +++ b/arch/powerpc/boot/dts/mpc885ads.dts @@ -37,7 +37,6 @@ interrupts = ; // decrementer interrupt interrupt-parent = ; linux,phandle = <201>; - linux,boot-cpu; }; }; -- cgit v1.2.3 From ae50517ef16bd264c0d68f7b81c143fd9f01a40a Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Wed, 14 Feb 2007 16:54:31 -0500 Subject: [POWERPC] Export of_find_property Without this, building drivers/serial/of_serial.c as a module fails. WARNING: ".of_find_property" [drivers/serial/of_serial.ko] undefined! Signed-off-by: Dave Jones Acked-by: Arnd Bergmann Signed-off-by: Andrew Morton Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/prom.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 3e86e6e0f778..8d52b23348bd 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -1599,6 +1599,7 @@ struct property *of_find_property(const struct device_node *np, return pp; } +EXPORT_SYMBOL(of_find_property); /* * Find a property with a given name for a given node -- cgit v1.2.3 From 8c0238b3f1a7849b89707ac6b7b0c84e1ed2df70 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Wed, 14 Feb 2007 16:08:05 +1100 Subject: [POWERPC] Fix cut and paste breakage in arch/powerpc/platforms/pseries/pseries.h My "cleanup" patch (dce623e0827e8d0ad60ce7f385c3394bf1b0bae0) had a cut and paste error for the !CONFIG_KEXEC case. Fifty lashes for me. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pseries/pseries.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/pseries/pseries.h b/arch/powerpc/platforms/pseries/pseries.h index b43f1397a5b6..35264f9af0ff 100644 --- a/arch/powerpc/platforms/pseries/pseries.h +++ b/arch/powerpc/platforms/pseries/pseries.h @@ -29,8 +29,8 @@ static inline smp_init_pseries_xics(void) { }; extern void setup_kexec_cpu_down_xics(void); extern void setup_kexec_cpu_down_mpic(void); #else -static inline setup_kexec_cpu_down_xics(void) { }; -static inline setup_kexec_cpu_down_mpic(void) { }; +static inline void setup_kexec_cpu_down_xics(void) { } +static inline void setup_kexec_cpu_down_mpic(void) { } #endif #endif /* _PSERIES_PSERIES_H */ -- cgit v1.2.3 From a32525449b30dfbae804f6b05cde041f35f5a811 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 15 Feb 2007 18:29:32 +1100 Subject: [POWERPC] Fix bug with early ioremap and 64k pages The code for bolting hash entries for ioremap done before proper mm initialization has a grown a bug when using 64K pages on a machine where non-cacheable mappings are demoted to 4K HW pages. The wrong page size index is being passed to the hash table mapping functions causing a crash at boot on some pSeries machines using bare metal linux. This fixes it. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/mm/pgtable_64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c index 16e4ee1c2318..1d443407423c 100644 --- a/arch/powerpc/mm/pgtable_64.c +++ b/arch/powerpc/mm/pgtable_64.c @@ -103,7 +103,7 @@ static int map_io_page(unsigned long ea, unsigned long pa, int flags) * */ if (htab_bolt_mapping(ea, ea + PAGE_SIZE, pa, flags, - mmu_virtual_psize)) { + mmu_io_psize)) { printk(KERN_ERR "Failed to do bolted mapping IO " "memory at %016lx !\n", pa); return -ENOMEM; -- cgit v1.2.3 From 1a6f1436d5fdecd4b395815c130df3c834892ab6 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Thu, 15 Feb 2007 10:01:11 +0100 Subject: [AVR32] Wire up the SysV IPC calls properly Wire up the individual sysvipc system calls and remove sys_ipc. Strictly speaking, this breaks the ABI, but since sys_ipc never worked anyway due to a silly bug, it isn't actually a regression. Signed-off-by: Haavard Skinnemoen --- arch/avr32/kernel/syscall_table.S | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/avr32/kernel/syscall_table.S b/arch/avr32/kernel/syscall_table.S index db8f8b55ffdf..52919c0eaa56 100644 --- a/arch/avr32/kernel/syscall_table.S +++ b/arch/avr32/kernel/syscall_table.S @@ -10,10 +10,6 @@ #if !defined(CONFIG_NFSD) && !defined(CONFIG_NFSD_MODULE) #define sys_nfsservctl sys_ni_syscall -#endif - -#if !defined(CONFIG_SYSV_IPC) -# define sys_ipc sys_ni_syscall #endif .section .rodata,"a",@progbits @@ -129,7 +125,7 @@ sys_call_table: .long sys_getitimer /* 105 */ .long sys_swapoff .long sys_sysinfo - .long sys_ipc + .long sys_ni_syscall /* was sys_ipc briefly */ .long sys_sendfile .long sys_setdomainname /* 110 */ .long sys_newuname @@ -287,4 +283,16 @@ sys_call_table: .long sys_tee .long sys_vmsplice .long __sys_epoll_pwait /* 265 */ + .long sys_msgget + .long sys_msgsnd + .long sys_msgrcv + .long sys_msgctl + .long sys_semget /* 270 */ + .long sys_semop + .long sys_semctl + .long sys_semtimedop + .long sys_shmat + .long sys_shmget /* 275 */ + .long sys_shmdt + .long sys_shmctl .long sys_ni_syscall /* r8 is saturated at nr_syscalls */ -- cgit v1.2.3 From 160f34531a71fdbbdb593a094273711ffb1257d7 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Thu, 15 Feb 2007 16:22:17 +0100 Subject: [AVR32] Remove unnecessary sys_nfsservctl conditional kernel/sys_ni.c defines sys_nfsservctl as a weak alias for sys_ni_syscall, so it's always safe to include it in the system call table. Signed-off-by: Haavard Skinnemoen --- arch/avr32/kernel/syscall_table.S | 4 ---- 1 file changed, 4 deletions(-) (limited to 'arch') diff --git a/arch/avr32/kernel/syscall_table.S b/arch/avr32/kernel/syscall_table.S index 52919c0eaa56..7c279586fbba 100644 --- a/arch/avr32/kernel/syscall_table.S +++ b/arch/avr32/kernel/syscall_table.S @@ -8,10 +8,6 @@ * published by the Free Software Foundation. */ -#if !defined(CONFIG_NFSD) && !defined(CONFIG_NFSD_MODULE) -#define sys_nfsservctl sys_ni_syscall -#endif - .section .rodata,"a",@progbits .type sys_call_table,@object .global sys_call_table -- cgit v1.2.3 From 7a5fe2387925405da0319330986184792ce48ad1 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Fri, 16 Feb 2007 13:14:33 +0100 Subject: [AVR32] Make sure all genclocks have a parent Initialize the parent field of each generic clock by looking at the PM registers. This means that the genclock operations can always assume that the parent field is non-null, so they don't have to check. Also remove a few unnecessary BUG_ON()s. Extracted from a patch by David Brownell. Signed-off-by: Haavard Skinnemoen --- arch/avr32/mach-at32ap/at32ap7000.c | 89 ++++++++++++++++++++++++++++++------- 1 file changed, 73 insertions(+), 16 deletions(-) (limited to 'arch') diff --git a/arch/avr32/mach-at32ap/at32ap7000.c b/arch/avr32/mach-at32ap/at32ap7000.c index c1e477ec7576..a5037aa102fb 100644 --- a/arch/avr32/mach-at32ap/at32ap7000.c +++ b/arch/avr32/mach-at32ap/at32ap7000.c @@ -310,8 +310,6 @@ static void genclk_mode(struct clk *clk, int enabled) { u32 control; - BUG_ON(clk->index > 7); - control = sm_readl(&system_manager, PM_GCCTRL + 4 * clk->index); if (enabled) control |= SM_BIT(CEN); @@ -325,11 +323,6 @@ static unsigned long genclk_get_rate(struct clk *clk) u32 control; unsigned long div = 1; - BUG_ON(clk->index > 7); - - if (!clk->parent) - return 0; - control = sm_readl(&system_manager, PM_GCCTRL + 4 * clk->index); if (control & SM_BIT(DIVEN)) div = 2 * (SM_BFEXT(DIV, control) + 1); @@ -342,11 +335,6 @@ static long genclk_set_rate(struct clk *clk, unsigned long rate, int apply) u32 control; unsigned long parent_rate, actual_rate, div; - BUG_ON(clk->index > 7); - - if (!clk->parent) - return 0; - parent_rate = clk->parent->get_rate(clk->parent); control = sm_readl(&system_manager, PM_GCCTRL + 4 * clk->index); @@ -373,11 +361,8 @@ int genclk_set_parent(struct clk *clk, struct clk *parent) { u32 control; - BUG_ON(clk->index > 7); - printk("clk %s: new parent %s (was %s)\n", - clk->name, parent->name, - clk->parent ? clk->parent->name : "(null)"); + clk->name, parent->name, clk->parent->name); control = sm_readl(&system_manager, PM_GCCTRL + 4 * clk->index); @@ -399,6 +384,22 @@ int genclk_set_parent(struct clk *clk, struct clk *parent) return 0; } +static void __init genclk_init_parent(struct clk *clk) +{ + u32 control; + struct clk *parent; + + BUG_ON(clk->index > 7); + + control = sm_readl(&system_manager, PM_GCCTRL + 4 * clk->index); + if (control & SM_BIT(OSCSEL)) + parent = (control & SM_BIT(PLLSEL)) ? &pll1 : &osc1; + else + parent = (control & SM_BIT(PLLSEL)) ? &pll0 : &osc0; + + clk->parent = parent; +} + /* -------------------------------------------------------------------- * System peripherals * -------------------------------------------------------------------- */ @@ -872,6 +873,50 @@ at32_add_device_lcdc(unsigned int id, struct lcdc_platform_data *data) return pdev; } +/* -------------------------------------------------------------------- + * GCLK + * -------------------------------------------------------------------- */ +static struct clk gclk0 = { + .name = "gclk0", + .mode = genclk_mode, + .get_rate = genclk_get_rate, + .set_rate = genclk_set_rate, + .set_parent = genclk_set_parent, + .index = 0, +}; +static struct clk gclk1 = { + .name = "gclk1", + .mode = genclk_mode, + .get_rate = genclk_get_rate, + .set_rate = genclk_set_rate, + .set_parent = genclk_set_parent, + .index = 1, +}; +static struct clk gclk2 = { + .name = "gclk2", + .mode = genclk_mode, + .get_rate = genclk_get_rate, + .set_rate = genclk_set_rate, + .set_parent = genclk_set_parent, + .index = 2, +}; +static struct clk gclk3 = { + .name = "gclk3", + .mode = genclk_mode, + .get_rate = genclk_get_rate, + .set_rate = genclk_set_rate, + .set_parent = genclk_set_parent, + .index = 3, +}; +static struct clk gclk4 = { + .name = "gclk4", + .mode = genclk_mode, + .get_rate = genclk_get_rate, + .set_rate = genclk_set_rate, + .set_parent = genclk_set_parent, + .index = 4, +}; + struct clk *at32_clock_list[] = { &osc32k, &osc0, @@ -908,6 +953,11 @@ struct clk *at32_clock_list[] = { &atmel_spi1_spi_clk, &lcdc0_hclk, &lcdc0_pixclk, + &gclk0, + &gclk1, + &gclk2, + &gclk3, + &gclk4, }; unsigned int at32_nr_clocks = ARRAY_SIZE(at32_clock_list); @@ -936,6 +986,13 @@ void __init at32_clock_init(void) if (sm_readl(sm, PM_PLL1) & SM_BIT(PLLOSC)) pll1.parent = &osc1; + genclk_init_parent(&gclk0); + genclk_init_parent(&gclk1); + genclk_init_parent(&gclk2); + genclk_init_parent(&gclk3); + genclk_init_parent(&gclk4); + genclk_init_parent(&lcdc0_pixclk); + /* * Turn on all clocks that have at least one user already, and * turn off everything else. We only do this for module -- cgit v1.2.3 From 23cebe2287474720c2eb0673581056cfb285a69f Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Fri, 16 Feb 2007 13:19:47 +0100 Subject: [AVR32] Warn, don't BUG if clk_disable is called too many times Print a helpful warning along with a stack dump if clk_disable is called on a already-disabled clock. Remove the BUG_ON(). Extracted from a patch by David Brownell. Signed-off-by: Haavard Skinnemoen --- arch/avr32/mach-at32ap/clock.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/avr32/mach-at32ap/clock.c b/arch/avr32/mach-at32ap/clock.c index 3d0d1097389f..49e7b12fe710 100644 --- a/arch/avr32/mach-at32ap/clock.c +++ b/arch/avr32/mach-at32ap/clock.c @@ -63,7 +63,11 @@ EXPORT_SYMBOL(clk_enable); static void __clk_disable(struct clk *clk) { - BUG_ON(clk->users == 0); + if (clk->users == 0) { + printk(KERN_ERR "%s: mismatched disable\n", clk->name); + WARN_ON(1); + return; + } if (--clk->users == 0 && clk->mode) clk->mode(clk, 0); -- cgit v1.2.3 From 41d8ca452f523b9245704c7dd8ef290fa7b78e6b Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Fri, 16 Feb 2007 13:56:11 +0100 Subject: [AVR32] Use per-controller spi_board_info structures Set up one spi_board_info array per controller and pass this to at32_add_device_spi so that it can set up any GPIO pins for chip selects based on this information. Extracted from a patch by David Brownell and adapted slightly. Signed-off-by: Haavard Skinnemoen --- arch/avr32/boards/atstk1000/atstk1002.c | 9 ++---- arch/avr32/mach-at32ap/at32ap7000.c | 55 +++++++++++++++++++++++---------- 2 files changed, 41 insertions(+), 23 deletions(-) (limited to 'arch') diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c index d47e39f0e971..5974768a59e5 100644 --- a/arch/avr32/boards/atstk1000/atstk1002.c +++ b/arch/avr32/boards/atstk1000/atstk1002.c @@ -8,7 +8,6 @@ * published by the Free Software Foundation. */ #include -#include #include #include #include @@ -36,12 +35,11 @@ static struct eth_addr __initdata hw_addr[2]; static struct eth_platform_data __initdata eth_data[2]; extern struct lcdc_platform_data atstk1000_fb0_data; -static struct spi_board_info spi_board_info[] __initdata = { +static struct spi_board_info spi0_board_info[] __initdata = { { + /* QVGA display */ .modalias = "ltv350qv", - .controller_data = (void *)GPIO_PIN_PA(4), .max_speed_hz = 16000000, - .bus_num = 0, .chip_select = 1, }, }; @@ -149,8 +147,7 @@ static int __init atstk1002_init(void) set_hw_addr(at32_add_device_eth(0, ð_data[0])); - spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); - at32_add_device_spi(0); + at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info)); at32_add_device_lcdc(0, &atstk1000_fb0_data); return 0; diff --git a/arch/avr32/mach-at32ap/at32ap7000.c b/arch/avr32/mach-at32ap/at32ap7000.c index a5037aa102fb..bc235507c5c7 100644 --- a/arch/avr32/mach-at32ap/at32ap7000.c +++ b/arch/avr32/mach-at32ap/at32ap7000.c @@ -8,6 +8,7 @@ #include #include #include +#include #include @@ -751,8 +752,41 @@ static struct resource atmel_spi1_resource[] = { DEFINE_DEV(atmel_spi, 1); DEV_CLK(spi_clk, atmel_spi1, pba, 1); -struct platform_device *__init at32_add_device_spi(unsigned int id) +static void +at32_spi_setup_slaves(unsigned int bus_num, struct spi_board_info *b, + unsigned int n, const u8 *pins) { + unsigned int pin, mode; + + for (; n; n--, b++) { + b->bus_num = bus_num; + if (b->chip_select >= 4) + continue; + pin = (unsigned)b->controller_data; + if (!pin) { + pin = pins[b->chip_select]; + b->controller_data = (void *)pin; + } + mode = AT32_GPIOF_OUTPUT; + if (!(b->mode & SPI_CS_HIGH)) + mode |= AT32_GPIOF_HIGH; + at32_select_gpio(pin, mode); + } +} + +struct platform_device *__init +at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n) +{ + /* + * Manage the chipselects as GPIOs, normally using the same pins + * the SPI controller expects; but boards can use other pins. + */ + static u8 __initdata spi0_pins[] = + { GPIO_PIN_PA(3), GPIO_PIN_PA(4), + GPIO_PIN_PA(5), GPIO_PIN_PA(20), }; + static u8 __initdata spi1_pins[] = + { GPIO_PIN_PB(2), GPIO_PIN_PB(3), + GPIO_PIN_PB(4), GPIO_PIN_PA(27), }; struct platform_device *pdev; switch (id) { @@ -761,14 +795,7 @@ struct platform_device *__init at32_add_device_spi(unsigned int id) select_peripheral(PA(0), PERIPH_A, 0); /* MISO */ select_peripheral(PA(1), PERIPH_A, 0); /* MOSI */ select_peripheral(PA(2), PERIPH_A, 0); /* SCK */ - - /* NPCS[2:0] */ - at32_select_gpio(GPIO_PIN_PA(3), - AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH); - at32_select_gpio(GPIO_PIN_PA(4), - AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH); - at32_select_gpio(GPIO_PIN_PA(5), - AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH); + at32_spi_setup_slaves(0, b, n, spi0_pins); break; case 1: @@ -776,20 +803,14 @@ struct platform_device *__init at32_add_device_spi(unsigned int id) select_peripheral(PB(0), PERIPH_B, 0); /* MISO */ select_peripheral(PB(1), PERIPH_B, 0); /* MOSI */ select_peripheral(PB(5), PERIPH_B, 0); /* SCK */ - - /* NPCS[2:0] */ - at32_select_gpio(GPIO_PIN_PB(2), - AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH); - at32_select_gpio(GPIO_PIN_PB(3), - AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH); - at32_select_gpio(GPIO_PIN_PB(4), - AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH); + at32_spi_setup_slaves(1, b, n, spi1_pins); break; default: return NULL; } + spi_register_board_info(b, n); platform_device_register(pdev); return pdev; } -- cgit v1.2.3 From d71a1dc62b0380ab9c4022dcba02775a791c3d7e Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Fri, 16 Feb 2007 09:57:22 -0600 Subject: [POWERPC] 83xx: Cleaned up 83xx platform dts files * Fixed up top level compatible property for all boards * Removed explicit linux,phandle usage. Use references and labels now * Fixed interrupt sense attribute, some interrupts were marked edge, that are level Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8313erdb.dts | 62 ++++++------ arch/powerpc/boot/dts/mpc8323emds.dts | 119 ++++++++++------------ arch/powerpc/boot/dts/mpc8349emitx.dts | 60 ++++++----- arch/powerpc/boot/dts/mpc8349emitxgp.dts | 39 ++++---- arch/powerpc/boot/dts/mpc834x_mds.dts | 164 +++++++++++++++---------------- arch/powerpc/boot/dts/mpc8360emds.dts | 123 +++++++++++------------ 6 files changed, 265 insertions(+), 302 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts index 3d2f5a06df3f..6d721900d00e 100644 --- a/arch/powerpc/boot/dts/mpc8313erdb.dts +++ b/arch/powerpc/boot/dts/mpc8313erdb.dts @@ -11,7 +11,7 @@ / { model = "MPC8313ERDB"; - compatible = "MPC83xx"; + compatible = "MPC8313ERDB", "MPC831xRDB", "MPC83xxRDB"; #address-cells = <1>; #size-cells = <1>; @@ -59,7 +59,7 @@ compatible = "fsl-i2c"; reg = <3000 100>; interrupts = ; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; dfsrr; }; @@ -68,7 +68,7 @@ compatible = "fsl-i2c"; reg = <3100 100>; interrupts = ; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; dfsrr; }; @@ -77,7 +77,7 @@ compatible = "mpc83xx_spi"; reg = <7000 1000>; interrupts = <10 8>; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; mode = <0>; }; @@ -88,8 +88,8 @@ reg = <23000 1000>; #address-cells = <1>; #size-cells = <0>; - interrupt-parent = <700>; - interrupts = <26 2>; + interrupt-parent = < &ipic >; + interrupts = <26 8>; phy_type = "utmi_wide"; }; @@ -99,18 +99,15 @@ reg = <24520 20>; #address-cells = <1>; #size-cells = <0>; - linux,phandle = <24520>; - ethernet-phy@1 { - linux,phandle = <2452001>; - interrupt-parent = <700>; - interrupts = <13 2>; + phy1: ethernet-phy@1 { + interrupt-parent = < &ipic >; + interrupts = <13 8>; reg = <1>; device_type = "ethernet-phy"; }; - ethernet-phy@4 { - linux,phandle = <2452004>; - interrupt-parent = <700>; - interrupts = <14 2>; + phy4: ethernet-phy@4 { + interrupt-parent = < &ipic >; + interrupts = <14 8>; reg = <4>; device_type = "ethernet-phy"; }; @@ -123,8 +120,8 @@ reg = <24000 1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <25 8 24 8 23 8>; - interrupt-parent = <700>; - phy-handle = <2452001>; + interrupt-parent = < &ipic >; + phy-handle = < &phy1 >; }; ethernet@25000 { @@ -134,8 +131,8 @@ reg = <25000 1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <22 8 21 8 20 8>; - interrupt-parent = <700>; - phy-handle = <2452004>; + interrupt-parent = < &ipic >; + phy-handle = < &phy4 >; }; serial@4500 { @@ -144,7 +141,7 @@ reg = <4500 100>; clock-frequency = <0>; interrupts = <9 8>; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; }; serial@4600 { @@ -153,7 +150,7 @@ reg = <4600 100>; clock-frequency = <0>; interrupts = ; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; }; pci@8500 { @@ -161,17 +158,17 @@ interrupt-map = < /* IDSEL 0x0E -mini PCI */ - 7000 0 0 1 700 12 8 - 7000 0 0 2 700 12 8 - 7000 0 0 3 700 12 8 - 7000 0 0 4 700 12 8 + 7000 0 0 1 &ipic 12 8 + 7000 0 0 2 &ipic 12 8 + 7000 0 0 3 &ipic 12 8 + 7000 0 0 4 &ipic 12 8 /* IDSEL 0x0F - PCI slot */ - 7800 0 0 1 700 11 8 - 7800 0 0 2 700 12 8 - 7800 0 0 3 700 11 8 - 7800 0 0 4 700 12 8>; - interrupt-parent = <700>; + 7800 0 0 1 &ipic 11 8 + 7800 0 0 2 &ipic 12 8 + 7800 0 0 3 &ipic 11 8 + 7800 0 0 4 &ipic 12 8>; + interrupt-parent = < &ipic >; interrupts = <42 8>; bus-range = <0 0>; ranges = <02000000 0 90000000 90000000 0 10000000 @@ -192,7 +189,7 @@ compatible = "talitos"; reg = <30000 7000>; interrupts = ; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; /* Rev. 2.2 */ num-channels = <1>; channel-fifo-len = <18>; @@ -206,8 +203,7 @@ * sense == 8: Level, low assertion * sense == 2: Edge, high-to-low change */ - pic@700 { - linux,phandle = <700>; + ipic: pic@700 { interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; diff --git a/arch/powerpc/boot/dts/mpc8323emds.dts b/arch/powerpc/boot/dts/mpc8323emds.dts index 57a3665f82ed..06b310698a02 100644 --- a/arch/powerpc/boot/dts/mpc8323emds.dts +++ b/arch/powerpc/boot/dts/mpc8323emds.dts @@ -11,16 +11,14 @@ / { model = "MPC8323EMDS"; - compatible = "MPC83xx"; + compatible = "MPC8323EMDS", "MPC832xMDS", "MPC83xxMDS"; #address-cells = <1>; #size-cells = <1>; - linux,phandle = <100>; cpus { #cpus = <1>; #address-cells = <1>; #size-cells = <0>; - linux,phandle = <200>; PowerPC,8323@0 { device_type = "cpu"; @@ -33,13 +31,11 @@ bus-frequency = <0>; clock-frequency = <0>; 32-bit; - linux,phandle = <201>; }; }; memory { device_type = "memory"; - linux,phandle = <300>; reg = <00000000 08000000>; }; @@ -68,7 +64,7 @@ compatible = "fsl-i2c"; reg = <3000 100>; interrupts = ; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; dfsrr; }; @@ -78,7 +74,7 @@ reg = <4500 100>; clock-frequency = <0>; interrupts = <9 8>; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; }; serial@4600 { @@ -87,7 +83,7 @@ reg = <4600 100>; clock-frequency = <0>; interrupts = ; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; }; crypto@30000 { @@ -96,7 +92,7 @@ compatible = "talitos"; reg = <30000 7000>; interrupts = ; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; /* Rev. 2.2 */ num-channels = <1>; channel-fifo-len = <18>; @@ -105,51 +101,50 @@ }; pci@8500 { - linux,phandle = <8500>; interrupt-map-mask = ; interrupt-map = < /* IDSEL 0x11 AD17 */ - 8800 0 0 1 700 14 8 - 8800 0 0 2 700 15 8 - 8800 0 0 3 700 16 8 - 8800 0 0 4 700 17 8 + 8800 0 0 1 &ipic 14 8 + 8800 0 0 2 &ipic 15 8 + 8800 0 0 3 &ipic 16 8 + 8800 0 0 4 &ipic 17 8 /* IDSEL 0x12 AD18 */ - 9000 0 0 1 700 16 8 - 9000 0 0 2 700 17 8 - 9000 0 0 3 700 14 8 - 9000 0 0 4 700 15 8 + 9000 0 0 1 &ipic 16 8 + 9000 0 0 2 &ipic 17 8 + 9000 0 0 3 &ipic 14 8 + 9000 0 0 4 &ipic 15 8 /* IDSEL 0x13 AD19 */ - 9800 0 0 1 700 17 8 - 9800 0 0 2 700 14 8 - 9800 0 0 3 700 15 8 - 9800 0 0 4 700 16 8 + 9800 0 0 1 &ipic 17 8 + 9800 0 0 2 &ipic 14 8 + 9800 0 0 3 &ipic 15 8 + 9800 0 0 4 &ipic 16 8 /* IDSEL 0x15 AD21*/ - a800 0 0 1 700 14 8 - a800 0 0 2 700 15 8 - a800 0 0 3 700 16 8 - a800 0 0 4 700 17 8 + a800 0 0 1 &ipic 14 8 + a800 0 0 2 &ipic 15 8 + a800 0 0 3 &ipic 16 8 + a800 0 0 4 &ipic 17 8 /* IDSEL 0x16 AD22*/ - b000 0 0 1 700 17 8 - b000 0 0 2 700 14 8 - b000 0 0 3 700 15 8 - b000 0 0 4 700 16 8 + b000 0 0 1 &ipic 17 8 + b000 0 0 2 &ipic 14 8 + b000 0 0 3 &ipic 15 8 + b000 0 0 4 &ipic 16 8 /* IDSEL 0x17 AD23*/ - b800 0 0 1 700 16 8 - b800 0 0 2 700 17 8 - b800 0 0 3 700 14 8 - b800 0 0 4 700 15 8 + b800 0 0 1 &ipic 16 8 + b800 0 0 2 &ipic 17 8 + b800 0 0 3 &ipic 14 8 + b800 0 0 4 &ipic 15 8 /* IDSEL 0x18 AD24*/ - c000 0 0 1 700 15 8 - c000 0 0 2 700 16 8 - c000 0 0 3 700 17 8 - c000 0 0 4 700 14 8>; - interrupt-parent = <700>; + c000 0 0 1 &ipic 15 8 + c000 0 0 2 &ipic 16 8 + c000 0 0 3 &ipic 17 8 + c000 0 0 4 &ipic 14 8>; + interrupt-parent = < &ipic >; interrupts = <42 8>; bus-range = <0 0>; ranges = <02000000 0 a0000000 90000000 0 10000000 @@ -164,8 +159,7 @@ device_type = "pci"; }; - pic@700 { - linux,phandle = <700>; + ipic: pic@700 { interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; @@ -179,8 +173,7 @@ device_type = "par_io"; num-ports = <7>; - ucc_pin@03 { - linux,phandle = <140003>; + pio3: ucc_pin@03 { pio-map = < /* port pin dir open_drain assignment has_irq */ 3 4 3 0 2 0 /* MDIO */ @@ -203,8 +196,7 @@ 1 c 1 0 1 0 /* TX_EN */ 1 d 2 0 1 0>;/* CRS */ }; - ucc_pin@04 { - linux,phandle = <140004>; + pio4: ucc_pin@04 { pio-map = < /* port pin dir open_drain assignment has_irq */ 3 1f 2 0 1 0 /* RX_CLK (CLK7) */ @@ -251,7 +243,7 @@ compatible = "fsl_spi"; reg = <4c0 40>; interrupts = <2>; - interrupt-parent = <80>; + interrupt-parent = < &qeic >; mode = "cpu"; }; @@ -260,7 +252,7 @@ compatible = "fsl_spi"; reg = <500 40>; interrupts = <1>; - interrupt-parent = <80>; + interrupt-parent = < &qeic >; mode = "cpu"; }; @@ -269,7 +261,7 @@ compatible = "qe_udc"; reg = <6c0 40 8B00 100>; interrupts = ; - interrupt-parent = <80>; + interrupt-parent = < &qeic >; mode = "slave"; }; @@ -280,12 +272,12 @@ device-id = <3>; reg = <2200 200>; interrupts = <22>; - interrupt-parent = <80>; + interrupt-parent = < &qeic >; mac-address = [ 00 04 9f 00 23 23 ]; rx-clock = <19>; tx-clock = <1a>; - phy-handle = <212003>; - pio-handle = <140003>; + phy-handle = < &phy3 >; + pio-handle = < &pio3 >; }; ucc@3200 { @@ -295,12 +287,12 @@ device-id = <4>; reg = <3000 200>; interrupts = <23>; - interrupt-parent = <80>; + interrupt-parent = < &qeic >; mac-address = [ 00 11 22 33 44 55 ]; rx-clock = <17>; tx-clock = <18>; - phy-handle = <212004>; - pio-handle = <140004>; + phy-handle = < &phy4 >; + pio-handle = < &pio4 >; }; mdio@2320 { @@ -310,26 +302,23 @@ device_type = "mdio"; compatible = "ucc_geth_phy"; - ethernet-phy@03 { - linux,phandle = <212003>; - interrupt-parent = <700>; - interrupts = <11 2>; + phy3: ethernet-phy@03 { + interrupt-parent = < &ipic >; + interrupts = <11 8>; reg = <3>; device_type = "ethernet-phy"; interface = <3>; //ENET_100_MII }; - ethernet-phy@04 { - linux,phandle = <212004>; - interrupt-parent = <700>; - interrupts = <12 2>; + phy4: ethernet-phy@04 { + interrupt-parent = < &ipic >; + interrupts = <12 8>; reg = <4>; device_type = "ethernet-phy"; interface = <3>; }; }; - qeic@80 { - linux,phandle = <80>; + qeic: qeic@80 { interrupt-controller; device_type = "qeic"; #address-cells = <0>; @@ -338,7 +327,7 @@ built-in; big-endian; interrupts = <20 8 21 8>; //high:32 low:33 - interrupt-parent = <700>; + interrupt-parent = < &ipic >; }; }; }; diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts index 27807fc45888..61b550bf1645 100644 --- a/arch/powerpc/boot/dts/mpc8349emitx.dts +++ b/arch/powerpc/boot/dts/mpc8349emitx.dts @@ -10,7 +10,7 @@ */ / { model = "MPC8349EMITX"; - compatible = "MPC834xMITX"; + compatible = "MPC8349EMITX", "MPC834xMITX", "MPC83xxMITX"; #address-cells = <1>; #size-cells = <1>; @@ -58,7 +58,7 @@ compatible = "fsl-i2c"; reg = <3000 100>; interrupts = ; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; dfsrr; }; @@ -67,7 +67,7 @@ compatible = "fsl-i2c"; reg = <3100 100>; interrupts = ; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; dfsrr; }; @@ -76,7 +76,7 @@ compatible = "mpc83xx_spi"; reg = <7000 1000>; interrupts = <10 8>; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; mode = <0>; }; @@ -86,8 +86,8 @@ reg = <22000 1000>; #address-cells = <1>; #size-cells = <0>; - interrupt-parent = <700>; - interrupts = <27 2>; + interrupt-parent = < &ipic >; + interrupts = <27 8>; phy_type = "ulpi"; port1; }; @@ -98,8 +98,8 @@ reg = <23000 1000>; #address-cells = <1>; #size-cells = <0>; - interrupt-parent = <700>; - interrupts = <26 2>; + interrupt-parent = < &ipic >; + interrupts = <26 8>; phy_type = "ulpi"; }; @@ -109,22 +109,19 @@ reg = <24520 20>; #address-cells = <1>; #size-cells = <0>; - linux,phandle = <24520>; /* Vitesse 8201 */ - ethernet-phy@1c { - linux,phandle = <245201c>; - interrupt-parent = <700>; - interrupts = <12 2>; + phy1c: ethernet-phy@1c { + interrupt-parent = < &ipic >; + interrupts = <12 8>; reg = <1c>; device_type = "ethernet-phy"; }; /* Vitesse 7385 */ - ethernet-phy@1f { - linux,phandle = <245201f>; - interrupt-parent = <700>; - interrupts = <12 2>; + phy1f: ethernet-phy@1f { + interrupt-parent = < &ipic >; + interrupts = <12 8>; reg = <1f>; device_type = "ethernet-phy"; }; @@ -138,8 +135,8 @@ address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <20 8 21 8 22 8>; - interrupt-parent = <700>; - phy-handle = <245201c>; + interrupt-parent = < &ipic >; + phy-handle = < &phy1c >; }; ethernet@25000 { @@ -152,8 +149,8 @@ address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <23 8 24 8 25 8>; - interrupt-parent = <700>; - phy-handle = <245201f>; + interrupt-parent = < &ipic >; + phy-handle = < &phy1f >; }; serial@4500 { @@ -162,7 +159,7 @@ reg = <4500 100>; clock-frequency = <0>; // from bootloader interrupts = <9 8>; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; }; serial@4600 { @@ -171,16 +168,16 @@ reg = <4600 100>; clock-frequency = <0>; // from bootloader interrupts = ; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; }; pci@8500 { interrupt-map-mask = ; interrupt-map = < /* IDSEL 0x10 - SATA */ - 8000 0 0 1 700 16 8 /* SATA_INTA */ + 8000 0 0 1 &ipic 16 8 /* SATA_INTA */ >; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; interrupts = <42 8>; bus-range = <0 0>; ranges = <42000000 0 80000000 80000000 0 10000000 @@ -199,13 +196,13 @@ interrupt-map-mask = ; interrupt-map = < /* IDSEL 0x0E - MiniPCI Slot */ - 7000 0 0 1 700 15 8 /* PCI_INTA */ + 7000 0 0 1 &ipic 15 8 /* PCI_INTA */ /* IDSEL 0x0F - PCI Slot */ - 7800 0 0 1 700 14 8 /* PCI_INTA */ - 7800 0 0 2 700 15 8 /* PCI_INTB */ + 7800 0 0 1 &ipic 14 8 /* PCI_INTA */ + 7800 0 0 2 &ipic 15 8 /* PCI_INTB */ >; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; interrupts = <43 8>; bus-range = <1 1>; ranges = <42000000 0 a0000000 a0000000 0 10000000 @@ -226,15 +223,14 @@ compatible = "talitos"; reg = <30000 10000>; interrupts = ; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; num-channels = <4>; channel-fifo-len = <18>; exec-units-mask = <0000007e>; descriptor-types-mask = <01010ebf>; }; - pic@700 { - linux,phandle = <700>; + ipic: pic@700 { interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts index 3190774de1d8..b2e1a5ec3779 100644 --- a/arch/powerpc/boot/dts/mpc8349emitxgp.dts +++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts @@ -10,7 +10,7 @@ */ / { model = "MPC8349EMITXGP"; - compatible = "MPC834xMITXGP"; + compatible = "MPC8349EMITXGP", "MPC834xMITX", "MPC83xxMITX"; #address-cells = <1>; #size-cells = <1>; @@ -58,7 +58,7 @@ compatible = "fsl-i2c"; reg = <3000 100>; interrupts = ; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; dfsrr; }; @@ -67,7 +67,7 @@ compatible = "fsl-i2c"; reg = <3100 100>; interrupts = ; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; dfsrr; }; @@ -76,7 +76,7 @@ compatible = "mpc83xx_spi"; reg = <7000 1000>; interrupts = <10 8>; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; mode = <0>; }; @@ -86,8 +86,8 @@ reg = <23000 1000>; #address-cells = <1>; #size-cells = <0>; - interrupt-parent = <700>; - interrupts = <26 2>; + interrupt-parent = < &ipic >; + interrupts = <26 8>; dr_mode = "otg"; phy_type = "ulpi"; }; @@ -98,13 +98,11 @@ reg = <24520 20>; #address-cells = <1>; #size-cells = <0>; - linux,phandle = <24520>; /* Vitesse 8201 */ - ethernet-phy@1c { - linux,phandle = <245201c>; - interrupt-parent = <700>; - interrupts = <12 2>; + phy1c: ethernet-phy@1c { + interrupt-parent = < &ipic >; + interrupts = <12 8>; reg = <1c>; device_type = "ethernet-phy"; }; @@ -117,8 +115,8 @@ reg = <24000 1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <20 8 21 8 22 8>; - interrupt-parent = <700>; - phy-handle = <245201c>; + interrupt-parent = < &ipic >; + phy-handle = < &phy1c >; }; serial@4500 { @@ -127,7 +125,7 @@ reg = <4500 100>; clock-frequency = <0>; // from bootloader interrupts = <9 8>; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; }; serial@4600 { @@ -136,17 +134,17 @@ reg = <4600 100>; clock-frequency = <0>; // from bootloader interrupts = ; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; }; pci@8600 { interrupt-map-mask = ; interrupt-map = < /* IDSEL 0x0F - PCI Slot */ - 7800 0 0 1 700 14 8 /* PCI_INTA */ - 7800 0 0 2 700 15 8 /* PCI_INTB */ + 7800 0 0 1 &ipic 14 8 /* PCI_INTA */ + 7800 0 0 2 &ipic 15 8 /* PCI_INTB */ >; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; interrupts = <43 8>; bus-range = <1 1>; ranges = <42000000 0 a0000000 a0000000 0 10000000 @@ -167,15 +165,14 @@ compatible = "talitos"; reg = <30000 10000>; interrupts = ; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; num-channels = <4>; channel-fifo-len = <18>; exec-units-mask = <0000007e>; descriptor-types-mask = <01010ebf>; }; - pic@700 { - linux,phandle = <700>; + ipic: pic@700 { interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts index dc121b3cb4a9..e4b43c24bc0b 100644 --- a/arch/powerpc/boot/dts/mpc834x_mds.dts +++ b/arch/powerpc/boot/dts/mpc834x_mds.dts @@ -11,7 +11,7 @@ / { model = "MPC8349EMDS"; - compatible = "MPC834xMDS"; + compatible = "MPC8349EMDS", "MPC834xMDS", "MPC83xxMDS"; #address-cells = <1>; #size-cells = <1>; @@ -64,7 +64,7 @@ compatible = "fsl-i2c"; reg = <3000 100>; interrupts = ; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; dfsrr; }; @@ -73,7 +73,7 @@ compatible = "fsl-i2c"; reg = <3100 100>; interrupts = ; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; dfsrr; }; @@ -82,7 +82,7 @@ compatible = "mpc83xx_spi"; reg = <7000 1000>; interrupts = <10 8>; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; mode = <0>; }; @@ -94,8 +94,8 @@ reg = <22000 1000>; #address-cells = <1>; #size-cells = <0>; - interrupt-parent = <700>; - interrupts = <27 2>; + interrupt-parent = < &ipic >; + interrupts = <27 8>; phy_type = "ulpi"; port1; }; @@ -106,8 +106,8 @@ reg = <23000 1000>; #address-cells = <1>; #size-cells = <0>; - interrupt-parent = <700>; - interrupts = <26 2>; + interrupt-parent = < &ipic >; + interrupts = <26 8>; dr_mode = "otg"; phy_type = "ulpi"; }; @@ -118,18 +118,15 @@ reg = <24520 20>; #address-cells = <1>; #size-cells = <0>; - linux,phandle = <24520>; - ethernet-phy@0 { - linux,phandle = <2452000>; - interrupt-parent = <700>; - interrupts = <11 2>; + phy0: ethernet-phy@0 { + interrupt-parent = < &ipic >; + interrupts = <11 8>; reg = <0>; device_type = "ethernet-phy"; }; - ethernet-phy@1 { - linux,phandle = <2452001>; - interrupt-parent = <700>; - interrupts = <12 2>; + phy1: ethernet-phy@1 { + interrupt-parent = < &ipic >; + interrupts = <12 8>; reg = <1>; device_type = "ethernet-phy"; }; @@ -143,8 +140,8 @@ address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <20 8 21 8 22 8>; - interrupt-parent = <700>; - phy-handle = <2452000>; + interrupt-parent = < &ipic >; + phy-handle = < &phy0 >; }; ethernet@25000 { @@ -157,8 +154,8 @@ address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <23 8 24 8 25 8>; - interrupt-parent = <700>; - phy-handle = <2452001>; + interrupt-parent = < &ipic >; + phy-handle = < &phy1 >; }; serial@4500 { @@ -167,7 +164,7 @@ reg = <4500 100>; clock-frequency = <0>; interrupts = <9 8>; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; }; serial@4600 { @@ -176,7 +173,7 @@ reg = <4600 100>; clock-frequency = <0>; interrupts = ; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; }; pci@8500 { @@ -184,47 +181,47 @@ interrupt-map = < /* IDSEL 0x11 */ - 8800 0 0 1 700 14 8 - 8800 0 0 2 700 15 8 - 8800 0 0 3 700 16 8 - 8800 0 0 4 700 17 8 + 8800 0 0 1 &ipic 14 8 + 8800 0 0 2 &ipic 15 8 + 8800 0 0 3 &ipic 16 8 + 8800 0 0 4 &ipic 17 8 /* IDSEL 0x12 */ - 9000 0 0 1 700 16 8 - 9000 0 0 2 700 17 8 - 9000 0 0 3 700 14 8 - 9000 0 0 4 700 15 8 + 9000 0 0 1 &ipic 16 8 + 9000 0 0 2 &ipic 17 8 + 9000 0 0 3 &ipic 14 8 + 9000 0 0 4 &ipic 15 8 /* IDSEL 0x13 */ - 9800 0 0 1 700 17 8 - 9800 0 0 2 700 14 8 - 9800 0 0 3 700 15 8 - 9800 0 0 4 700 16 8 + 9800 0 0 1 &ipic 17 8 + 9800 0 0 2 &ipic 14 8 + 9800 0 0 3 &ipic 15 8 + 9800 0 0 4 &ipic 16 8 /* IDSEL 0x15 */ - a800 0 0 1 700 14 8 - a800 0 0 2 700 15 8 - a800 0 0 3 700 16 8 - a800 0 0 4 700 17 8 + a800 0 0 1 &ipic 14 8 + a800 0 0 2 &ipic 15 8 + a800 0 0 3 &ipic 16 8 + a800 0 0 4 &ipic 17 8 /* IDSEL 0x16 */ - b000 0 0 1 700 17 8 - b000 0 0 2 700 14 8 - b000 0 0 3 700 15 8 - b000 0 0 4 700 16 8 + b000 0 0 1 &ipic 17 8 + b000 0 0 2 &ipic 14 8 + b000 0 0 3 &ipic 15 8 + b000 0 0 4 &ipic 16 8 /* IDSEL 0x17 */ - b800 0 0 1 700 16 8 - b800 0 0 2 700 17 8 - b800 0 0 3 700 14 8 - b800 0 0 4 700 15 8 + b800 0 0 1 &ipic 16 8 + b800 0 0 2 &ipic 17 8 + b800 0 0 3 &ipic 14 8 + b800 0 0 4 &ipic 15 8 /* IDSEL 0x18 */ - c000 0 0 1 700 15 8 - c000 0 0 2 700 16 8 - c000 0 0 3 700 17 8 - c000 0 0 4 700 14 8>; - interrupt-parent = <700>; + c000 0 0 1 &ipic 15 8 + c000 0 0 2 &ipic 16 8 + c000 0 0 3 &ipic 17 8 + c000 0 0 4 &ipic 14 8>; + interrupt-parent = < &ipic >; interrupts = <42 8>; bus-range = <0 0>; ranges = <02000000 0 a0000000 a0000000 0 10000000 @@ -244,47 +241,47 @@ interrupt-map = < /* IDSEL 0x11 */ - 8800 0 0 1 700 14 8 - 8800 0 0 2 700 15 8 - 8800 0 0 3 700 16 8 - 8800 0 0 4 700 17 8 + 8800 0 0 1 &ipic 14 8 + 8800 0 0 2 &ipic 15 8 + 8800 0 0 3 &ipic 16 8 + 8800 0 0 4 &ipic 17 8 /* IDSEL 0x12 */ - 9000 0 0 1 700 16 8 - 9000 0 0 2 700 17 8 - 9000 0 0 3 700 14 8 - 9000 0 0 4 700 15 8 + 9000 0 0 1 &ipic 16 8 + 9000 0 0 2 &ipic 17 8 + 9000 0 0 3 &ipic 14 8 + 9000 0 0 4 &ipic 15 8 /* IDSEL 0x13 */ - 9800 0 0 1 700 17 8 - 9800 0 0 2 700 14 8 - 9800 0 0 3 700 15 8 - 9800 0 0 4 700 16 8 + 9800 0 0 1 &ipic 17 8 + 9800 0 0 2 &ipic 14 8 + 9800 0 0 3 &ipic 15 8 + 9800 0 0 4 &ipic 16 8 /* IDSEL 0x15 */ - a800 0 0 1 700 14 8 - a800 0 0 2 700 15 8 - a800 0 0 3 700 16 8 - a800 0 0 4 700 17 8 + a800 0 0 1 &ipic 14 8 + a800 0 0 2 &ipic 15 8 + a800 0 0 3 &ipic 16 8 + a800 0 0 4 &ipic 17 8 /* IDSEL 0x16 */ - b000 0 0 1 700 17 8 - b000 0 0 2 700 14 8 - b000 0 0 3 700 15 8 - b000 0 0 4 700 16 8 + b000 0 0 1 &ipic 17 8 + b000 0 0 2 &ipic 14 8 + b000 0 0 3 &ipic 15 8 + b000 0 0 4 &ipic 16 8 /* IDSEL 0x17 */ - b800 0 0 1 700 16 8 - b800 0 0 2 700 17 8 - b800 0 0 3 700 14 8 - b800 0 0 4 700 15 8 + b800 0 0 1 &ipic 16 8 + b800 0 0 2 &ipic 17 8 + b800 0 0 3 &ipic 14 8 + b800 0 0 4 &ipic 15 8 /* IDSEL 0x18 */ - c000 0 0 1 700 15 8 - c000 0 0 2 700 16 8 - c000 0 0 3 700 17 8 - c000 0 0 4 700 14 8>; - interrupt-parent = <700>; + c000 0 0 1 &ipic 15 8 + c000 0 0 2 &ipic 16 8 + c000 0 0 3 &ipic 17 8 + c000 0 0 4 &ipic 14 8>; + interrupt-parent = < &ipic >; interrupts = <42 8>; bus-range = <0 0>; ranges = <02000000 0 b0000000 b0000000 0 10000000 @@ -306,7 +303,7 @@ compatible = "talitos"; reg = <30000 10000>; interrupts = ; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; num-channels = <4>; channel-fifo-len = <18>; exec-units-mask = <0000007e>; @@ -321,8 +318,7 @@ * sense == 8: Level, low assertion * sense == 2: Edge, high-to-low change */ - pic@700 { - linux,phandle = <700>; + ipic: pic@700 { interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; diff --git a/arch/powerpc/boot/dts/mpc8360emds.dts b/arch/powerpc/boot/dts/mpc8360emds.dts index 303bd668deb7..4fe45c021848 100644 --- a/arch/powerpc/boot/dts/mpc8360emds.dts +++ b/arch/powerpc/boot/dts/mpc8360emds.dts @@ -15,17 +15,15 @@ */ / { - model = "MPC8360EPB"; - compatible = "MPC83xx"; + model = "MPC8360MDS"; + compatible = "MPC8360EMDS", "MPC836xMDS", "MPC83xxMDS"; #address-cells = <1>; #size-cells = <1>; - linux,phandle = <100>; cpus { #cpus = <1>; #address-cells = <1>; #size-cells = <0>; - linux,phandle = <200>; PowerPC,8360@0 { device_type = "cpu"; @@ -38,13 +36,11 @@ bus-frequency = ; clock-frequency = <1F78A400>; 32-bit; - linux,phandle = <201>; }; }; memory { device_type = "memory"; - linux,phandle = <300>; reg = <00000000 10000000>; }; @@ -73,7 +69,7 @@ compatible = "fsl-i2c"; reg = <3000 100>; interrupts = ; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; dfsrr; }; @@ -82,7 +78,7 @@ compatible = "fsl-i2c"; reg = <3100 100>; interrupts = ; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; dfsrr; }; @@ -92,7 +88,7 @@ reg = <4500 100>; clock-frequency = ; interrupts = <9 8>; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; }; serial@4600 { @@ -101,7 +97,7 @@ reg = <4600 100>; clock-frequency = ; interrupts = ; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; }; crypto@30000 { @@ -110,7 +106,7 @@ compatible = "talitos"; reg = <30000 10000>; interrupts = ; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; num-channels = <4>; channel-fifo-len = <18>; exec-units-mask = <0000007e>; @@ -119,52 +115,51 @@ }; pci@8500 { - linux,phandle = <8500>; interrupt-map-mask = ; interrupt-map = < /* IDSEL 0x11 AD17 */ - 8800 0 0 1 700 14 8 - 8800 0 0 2 700 15 8 - 8800 0 0 3 700 16 8 - 8800 0 0 4 700 17 8 + 8800 0 0 1 &ipic 14 8 + 8800 0 0 2 &ipic 15 8 + 8800 0 0 3 &ipic 16 8 + 8800 0 0 4 &ipic 17 8 /* IDSEL 0x12 AD18 */ - 9000 0 0 1 700 16 8 - 9000 0 0 2 700 17 8 - 9000 0 0 3 700 14 8 - 9000 0 0 4 700 15 8 + 9000 0 0 1 &ipic 16 8 + 9000 0 0 2 &ipic 17 8 + 9000 0 0 3 &ipic 14 8 + 9000 0 0 4 &ipic 15 8 /* IDSEL 0x13 AD19 */ - 9800 0 0 1 700 17 8 - 9800 0 0 2 700 14 8 - 9800 0 0 3 700 15 8 - 9800 0 0 4 700 16 8 + 9800 0 0 1 &ipic 17 8 + 9800 0 0 2 &ipic 14 8 + 9800 0 0 3 &ipic 15 8 + 9800 0 0 4 &ipic 16 8 /* IDSEL 0x15 AD21*/ - a800 0 0 1 700 14 8 - a800 0 0 2 700 15 8 - a800 0 0 3 700 16 8 - a800 0 0 4 700 17 8 + a800 0 0 1 &ipic 14 8 + a800 0 0 2 &ipic 15 8 + a800 0 0 3 &ipic 16 8 + a800 0 0 4 &ipic 17 8 /* IDSEL 0x16 AD22*/ - b000 0 0 1 700 17 8 - b000 0 0 2 700 14 8 - b000 0 0 3 700 15 8 - b000 0 0 4 700 16 8 + b000 0 0 1 &ipic 17 8 + b000 0 0 2 &ipic 14 8 + b000 0 0 3 &ipic 15 8 + b000 0 0 4 &ipic 16 8 /* IDSEL 0x17 AD23*/ - b800 0 0 1 700 16 8 - b800 0 0 2 700 17 8 - b800 0 0 3 700 14 8 - b800 0 0 4 700 15 8 + b800 0 0 1 &ipic 16 8 + b800 0 0 2 &ipic 17 8 + b800 0 0 3 &ipic 14 8 + b800 0 0 4 &ipic 15 8 /* IDSEL 0x18 AD24*/ - c000 0 0 1 700 15 8 - c000 0 0 2 700 16 8 - c000 0 0 3 700 17 8 - c000 0 0 4 700 14 8>; - interrupt-parent = <700>; + c000 0 0 1 &ipic 15 8 + c000 0 0 2 &ipic 16 8 + c000 0 0 3 &ipic 17 8 + c000 0 0 4 &ipic 14 8>; + interrupt-parent = < &ipic >; interrupts = <42 8>; bus-range = <0 0>; ranges = <02000000 0 a0000000 a0000000 0 10000000 @@ -179,8 +174,7 @@ device_type = "pci"; }; - pic@700 { - linux,phandle = <700>; + ipic: pic@700 { interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; @@ -194,8 +188,7 @@ device_type = "par_io"; num-ports = <7>; - ucc_pin@01 { - linux,phandle = <140001>; + pio1: ucc_pin@01 { pio-map = < /* port pin dir open_drain assignment has_irq */ 0 3 1 0 1 0 /* TxD0 */ @@ -222,8 +215,7 @@ 2 9 1 0 3 0 /* GTX_CLK - CLK10 */ 2 8 2 0 1 0>; /* GTX125 - CLK9 */ }; - ucc_pin@02 { - linux,phandle = <140002>; + pio2: ucc_pin@02 { pio-map = < /* port pin dir open_drain assignment has_irq */ 0 11 1 0 1 0 /* TxD0 */ @@ -280,7 +272,7 @@ compatible = "fsl_spi"; reg = <4c0 40>; interrupts = <2>; - interrupt-parent = <80>; + interrupt-parent = < &qeic >; mode = "cpu"; }; @@ -289,7 +281,7 @@ compatible = "fsl_spi"; reg = <500 40>; interrupts = <1>; - interrupt-parent = <80>; + interrupt-parent = < &qeic >; mode = "cpu"; }; @@ -298,7 +290,7 @@ compatible = "qe_udc"; reg = <6c0 40 8B00 100>; interrupts = ; - interrupt-parent = <80>; + interrupt-parent = < &qeic >; mode = "slave"; }; @@ -309,12 +301,12 @@ device-id = <1>; reg = <2000 200>; interrupts = <20>; - interrupt-parent = <80>; + interrupt-parent = < &qeic >; mac-address = [ 00 04 9f 00 23 23 ]; rx-clock = <0>; tx-clock = <19>; - phy-handle = <212000>; - pio-handle = <140001>; + phy-handle = < &phy0 >; + pio-handle = < &pio1 >; }; ucc@3000 { @@ -324,12 +316,12 @@ device-id = <2>; reg = <3000 200>; interrupts = <21>; - interrupt-parent = <80>; + interrupt-parent = < &qeic >; mac-address = [ 00 11 22 33 44 55 ]; rx-clock = <0>; tx-clock = <14>; - phy-handle = <212001>; - pio-handle = <140002>; + phy-handle = < &phy1 >; + pio-handle = < &pio2 >; }; mdio@2120 { @@ -339,26 +331,23 @@ device_type = "mdio"; compatible = "ucc_geth_phy"; - ethernet-phy@00 { - linux,phandle = <212000>; - interrupt-parent = <700>; - interrupts = <11 2>; + phy0: ethernet-phy@00 { + interrupt-parent = < &ipic >; + interrupts = <11 8>; reg = <0>; device_type = "ethernet-phy"; interface = <6>; //ENET_1000_GMII }; - ethernet-phy@01 { - linux,phandle = <212001>; - interrupt-parent = <700>; - interrupts = <12 2>; + phy1: ethernet-phy@01 { + interrupt-parent = < &ipic >; + interrupts = <12 8>; reg = <1>; device_type = "ethernet-phy"; interface = <6>; }; }; - qeic@80 { - linux,phandle = <80>; + qeic: qeic@80 { interrupt-controller; device_type = "qeic"; #address-cells = <0>; @@ -367,7 +356,7 @@ built-in; big-endian; interrupts = <20 8 21 8>; //high:32 low:33 - interrupt-parent = <700>; + interrupt-parent = < &ipic >; }; }; -- cgit v1.2.3 From 838e56a11cdb2abaf490eb7879ab021db938d47d Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Fri, 16 Feb 2007 01:27:21 -0800 Subject: [PATCH] uml: fix 2.6.20 hang A previous cleanup misused need_poll, which had a fairly broken interface. It implemented a growable array, changing the used elements count itself, but leaving it up to the caller to fill in the actual elements, including the entire array if the array had to be reallocated. This worked because the previous users were switching between two such structures, and the elements were copied from the inactive array to the active array after making sure the active array had enough room. maybe_sigio_broken was made to use need_poll, but it was operating on a single array, so when the buffer was reallocated, the previous contents were lost. This patch makes need_poll implement more sane semantics. It merely assures that the array is of the proper size and that the contents are preserved. It is up to the caller to adjust the used elements count and to ensure that the proper elements are resent. This manifested itself as a hang in 2.6.20 as the uninitialized buffer convinced UML that one of its own file descriptors didn't support SIGIO and needed to be watched by poll in a separate thread. The result was an interrupt flood as control traffic over this descriptor sparked interrupts, which resulted in more control traffic, ad nauseum. Signed-off-by: Jeff Dike Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/os-Linux/sigio.c | 38 ++++++++++++++++++++------------------ 1 file changed, 20 insertions(+), 18 deletions(-) (limited to 'arch') diff --git a/arch/um/os-Linux/sigio.c b/arch/um/os-Linux/sigio.c index 925a65240cfe..b2e1fd8e3571 100644 --- a/arch/um/os-Linux/sigio.c +++ b/arch/um/os-Linux/sigio.c @@ -97,20 +97,22 @@ static int write_sigio_thread(void *unused) static int need_poll(struct pollfds *polls, int n) { - if(n <= polls->size){ - polls->used = n; + struct pollfd *new; + + if(n <= polls->size) return 0; - } - kfree(polls->poll); - polls->poll = um_kmalloc_atomic(n * sizeof(struct pollfd)); - if(polls->poll == NULL){ + + new = um_kmalloc_atomic(n * sizeof(struct pollfd)); + if(new == NULL){ printk("need_poll : failed to allocate new pollfds\n"); - polls->size = 0; - polls->used = 0; return -ENOMEM; } + + memcpy(new, polls->poll, polls->used * sizeof(struct pollfd)); + kfree(polls->poll); + + polls->poll = new; polls->size = n; - polls->used = n; return 0; } @@ -171,15 +173,15 @@ int add_sigio_fd(int fd) goto out; } - n = current_poll.used + 1; - err = need_poll(&next_poll, n); + n = current_poll.used; + err = need_poll(&next_poll, n + 1); if(err) goto out; - for(i = 0; i < current_poll.used; i++) - next_poll.poll[i] = current_poll.poll[i]; - - next_poll.poll[n - 1] = *p; + memcpy(next_poll.poll, current_poll.poll, + current_poll.used * sizeof(struct pollfd)); + next_poll.poll[n] = *p; + next_poll.used = n + 1; update_thread(); out: sigio_unlock(); @@ -214,6 +216,7 @@ int ignore_sigio_fd(int fd) if(p->fd != fd) next_poll.poll[n++] = *p; } + next_poll.used = current_poll.used - 1; update_thread(); out: @@ -331,10 +334,9 @@ void maybe_sigio_broken(int fd, int read) sigio_lock(); err = need_poll(&all_sigio_fds, all_sigio_fds.used + 1); - if(err){ - printk("maybe_sigio_broken - failed to add pollfd\n"); + if(err) goto out; - } + all_sigio_fds.poll[all_sigio_fds.used++] = ((struct pollfd) { .fd = fd, .events = read ? POLLIN : POLLOUT, -- cgit v1.2.3 From b463fc60730bea6cdd73fec6edc6ec4658d47d37 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Fri, 16 Feb 2007 01:27:23 -0800 Subject: [PATCH] vmi-versus-hrtimers arch/i386/kernel/built-in.o: In function `vmi_stop_hz_timer': : undefined reference to `next_timer_interrupt' If CONFIG_NO_HZ, next_timer_interrupt() doesn't exist (and presumably doesn't make sense). Perhaps VMI shouildn't be playing with timer internals at this level. Cc: Zachary Amsden Cc: Andi Kleen Cc: Jeremy Fitzhardinge Cc: Rusty Russell Cc: Chris Wright Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig index 595fb771366e..4ea31c327d1f 100644 --- a/arch/i386/Kconfig +++ b/arch/i386/Kconfig @@ -205,7 +205,7 @@ config PARAVIRT config VMI bool "VMI Paravirt-ops support" - depends on PARAVIRT + depends on PARAVIRT && !NO_HZ default y help VMI provides a paravirtualized interface to multiple hypervisors -- cgit v1.2.3 From 950f4427c2ddc921164088a20f01304cf231437c Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 16 Feb 2007 01:27:24 -0800 Subject: [PATCH] Add irq flag to disable balancing for an interrupt Add a flag so we can prevent the irq balancing of an interrupt. Move the bits, so we have room for more :) Necessary for the ability to setup clocksources more flexible (e.g. use the different HPET channels per CPU) Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar Cc: john stultz Cc: Roman Zippel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/io_apic.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c index e30ccedad0b9..c76be1110922 100644 --- a/arch/i386/kernel/io_apic.c +++ b/arch/i386/kernel/io_apic.c @@ -482,8 +482,8 @@ static void do_irq_balance(void) package_index = CPU_TO_PACKAGEINDEX(i); for (j = 0; j < NR_IRQS; j++) { unsigned long value_now, delta; - /* Is this an active IRQ? */ - if (!irq_desc[j].action) + /* Is this an active IRQ or balancing disabled ? */ + if (!irq_desc[j].action || irq_balancing_disabled(j)) continue; if ( package_index == i ) IRQ_DELTA(package_index,j) = 0; -- cgit v1.2.3 From c1d370e167d66b10bca3b602d3740405469383de Mon Sep 17 00:00:00 2001 From: John Stultz Date: Fri, 16 Feb 2007 01:27:31 -0800 Subject: [PATCH] i386: use GTOD persistent clock support Persistent clock support: do proper timekeeping across suspend/resume, i386 arch support. [bunk@stusta.de: cleanup] Build-fixes-from: Andrew Morton Signed-off-by: John Stultz Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar Cc: Roman Zippel Cc: Adrian Bunk Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/apm.c | 44 ---------------------------------------- arch/i386/kernel/time.c | 54 +------------------------------------------------ 2 files changed, 1 insertion(+), 97 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/apm.c b/arch/i386/kernel/apm.c index f9ba0af7ee1f..064bbf2861f4 100644 --- a/arch/i386/kernel/apm.c +++ b/arch/i386/kernel/apm.c @@ -236,7 +236,6 @@ #include "io_ports.h" -extern unsigned long get_cmos_time(void); extern void machine_real_restart(unsigned char *, int); #if defined(CONFIG_APM_DISPLAY_BLANK) && defined(CONFIG_VT) @@ -1176,28 +1175,6 @@ out: spin_unlock(&user_list_lock); } -static void set_time(void) -{ - struct timespec ts; - if (got_clock_diff) { /* Must know time zone in order to set clock */ - ts.tv_sec = get_cmos_time() + clock_cmos_diff; - ts.tv_nsec = 0; - do_settimeofday(&ts); - } -} - -static void get_time_diff(void) -{ -#ifndef CONFIG_APM_RTC_IS_GMT - /* - * Estimate time zone so that set_time can update the clock - */ - clock_cmos_diff = -get_cmos_time(); - clock_cmos_diff += get_seconds(); - got_clock_diff = 1; -#endif -} - static void reinit_timer(void) { #ifdef INIT_TIMER_AFTER_SUSPEND @@ -1237,19 +1214,6 @@ static int suspend(int vetoable) local_irq_disable(); device_power_down(PMSG_SUSPEND); - /* serialize with the timer interrupt */ - write_seqlock(&xtime_lock); - - /* protect against access to timer chip registers */ - spin_lock(&i8253_lock); - - get_time_diff(); - /* - * Irq spinlock must be dropped around set_system_power_state. - * We'll undo any timer changes due to interrupts below. - */ - spin_unlock(&i8253_lock); - write_sequnlock(&xtime_lock); local_irq_enable(); save_processor_state(); @@ -1258,7 +1222,6 @@ static int suspend(int vetoable) restore_processor_state(); local_irq_disable(); - set_time(); reinit_timer(); if (err == APM_NO_ERROR) @@ -1288,11 +1251,6 @@ static void standby(void) local_irq_disable(); device_power_down(PMSG_SUSPEND); - /* serialize with the timer interrupt */ - write_seqlock(&xtime_lock); - /* If needed, notify drivers here */ - get_time_diff(); - write_sequnlock(&xtime_lock); local_irq_enable(); err = set_system_power_state(APM_STATE_STANDBY); @@ -1386,7 +1344,6 @@ static void check_events(void) ignore_bounce = 1; if ((event != APM_NORMAL_RESUME) || (ignore_normal_resume == 0)) { - set_time(); device_resume(); pm_send_all(PM_RESUME, (void *)0); queue_event(event, NULL); @@ -1402,7 +1359,6 @@ static void check_events(void) break; case APM_UPDATE_TIME: - set_time(); break; case APM_CRITICAL_SUSPEND: diff --git a/arch/i386/kernel/time.c b/arch/i386/kernel/time.c index a4f67a6e6821..044c17572eef 100644 --- a/arch/i386/kernel/time.c +++ b/arch/i386/kernel/time.c @@ -212,7 +212,7 @@ irqreturn_t timer_interrupt(int irq, void *dev_id) } /* not static: needed by APM */ -unsigned long get_cmos_time(void) +unsigned long read_persistent_clock(void) { unsigned long retval; unsigned long flags; @@ -225,7 +225,6 @@ unsigned long get_cmos_time(void) return retval; } -EXPORT_SYMBOL(get_cmos_time); static void sync_cmos_clock(unsigned long dummy); @@ -278,58 +277,19 @@ void notify_arch_cmos_timer(void) mod_timer(&sync_cmos_timer, jiffies + 1); } -static long clock_cmos_diff; -static unsigned long sleep_start; - -static int timer_suspend(struct sys_device *dev, pm_message_t state) -{ - /* - * Estimate time zone so that set_time can update the clock - */ - unsigned long ctime = get_cmos_time(); - - clock_cmos_diff = -ctime; - clock_cmos_diff += get_seconds(); - sleep_start = ctime; - return 0; -} - static int timer_resume(struct sys_device *dev) { - unsigned long flags; - unsigned long sec; - unsigned long ctime = get_cmos_time(); - long sleep_length = (ctime - sleep_start) * HZ; - struct timespec ts; - - if (sleep_length < 0) { - printk(KERN_WARNING "CMOS clock skew detected in timer resume!\n"); - /* The time after the resume must not be earlier than the time - * before the suspend or some nasty things will happen - */ - sleep_length = 0; - ctime = sleep_start; - } #ifdef CONFIG_HPET_TIMER if (is_hpet_enabled()) hpet_reenable(); #endif setup_pit_timer(); - - sec = ctime + clock_cmos_diff; - ts.tv_sec = sec; - ts.tv_nsec = 0; - do_settimeofday(&ts); - write_seqlock_irqsave(&xtime_lock, flags); - jiffies_64 += sleep_length; - write_sequnlock_irqrestore(&xtime_lock, flags); touch_softlockup_watchdog(); return 0; } static struct sysdev_class timer_sysclass = { .resume = timer_resume, - .suspend = timer_suspend, set_kset_name("timer"), }; @@ -355,12 +315,6 @@ extern void (*late_time_init)(void); /* Duplicate of time_init() below, with hpet_enable part added */ static void __init hpet_time_init(void) { - struct timespec ts; - ts.tv_sec = get_cmos_time(); - ts.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ); - - do_settimeofday(&ts); - if ((hpet_enable() >= 0) && hpet_use_timer) { printk("Using HPET for base-timer\n"); } @@ -371,7 +325,6 @@ static void __init hpet_time_init(void) void __init time_init(void) { - struct timespec ts; #ifdef CONFIG_HPET_TIMER if (is_hpet_capable()) { /* @@ -382,10 +335,5 @@ void __init time_init(void) return; } #endif - ts.tv_sec = get_cmos_time(); - ts.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ); - - do_settimeofday(&ts); - do_time_init(); } -- cgit v1.2.3 From 26a08eb301a2e3fce5a501e3dd26cf3ec46591d7 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 16 Feb 2007 01:27:32 -0800 Subject: [PATCH] i386 Remove useless code in tsc.c The delayed work code in arch/i386/kernel/tsc.c is an unused leftover of the GTOD conversion. Remove it. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar Cc: john stultz Cc: Roman Zippel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/tsc.c | 40 ++-------------------------------------- 1 file changed, 2 insertions(+), 38 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/tsc.c b/arch/i386/kernel/tsc.c index 46f752a8bbf3..d4000649942a 100644 --- a/arch/i386/kernel/tsc.c +++ b/arch/i386/kernel/tsc.c @@ -222,34 +222,6 @@ out_no_tsc: #ifdef CONFIG_CPU_FREQ -static unsigned int cpufreq_delayed_issched = 0; -static unsigned int cpufreq_init = 0; -static struct work_struct cpufreq_delayed_get_work; - -static void handle_cpufreq_delayed_get(struct work_struct *work) -{ - unsigned int cpu; - - for_each_online_cpu(cpu) - cpufreq_get(cpu); - - cpufreq_delayed_issched = 0; -} - -/* - * if we notice cpufreq oddness, schedule a call to cpufreq_get() as it tries - * to verify the CPU frequency the timing core thinks the CPU is running - * at is still correct. - */ -static inline void cpufreq_delayed_get(void) -{ - if (cpufreq_init && !cpufreq_delayed_issched) { - cpufreq_delayed_issched = 1; - printk(KERN_DEBUG "Checking if CPU frequency changed.\n"); - schedule_work(&cpufreq_delayed_get_work); - } -} - /* * if the CPU frequency is scaled, TSC-based delays will need a different * loops_per_jiffy value to function properly. @@ -313,17 +285,9 @@ static struct notifier_block time_cpufreq_notifier_block = { static int __init cpufreq_tsc(void) { - int ret; - - INIT_WORK(&cpufreq_delayed_get_work, handle_cpufreq_delayed_get); - ret = cpufreq_register_notifier(&time_cpufreq_notifier_block, - CPUFREQ_TRANSITION_NOTIFIER); - if (!ret) - cpufreq_init = 1; - - return ret; + return cpufreq_register_notifier(&time_cpufreq_notifier_block, + CPUFREQ_TRANSITION_NOTIFIER); } - core_initcall(cpufreq_tsc); #endif -- cgit v1.2.3 From 92c7e00254b2d0efc1e36ac3e45474ce1871b6b2 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 16 Feb 2007 01:27:33 -0800 Subject: [PATCH] Simplify the registration of clocksources Enqueue clocksources in rating order to make selection of the clocksource easier. Also check the match with an user override at enqueue time. Preparatory patch for the generic clocksource verification. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar Cc: john stultz Cc: Roman Zippel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/tsc.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/tsc.c b/arch/i386/kernel/tsc.c index d4000649942a..6f6971da761c 100644 --- a/arch/i386/kernel/tsc.c +++ b/arch/i386/kernel/tsc.c @@ -323,8 +323,7 @@ static int tsc_update_callback(void) /* check to see if we should switch to the safe clocksource: */ if (clocksource_tsc.rating != 0 && check_tsc_unstable()) { - clocksource_tsc.rating = 0; - clocksource_reselect(); + clocksource_change_rating(&clocksource_tsc, 0); change = 1; } -- cgit v1.2.3 From 95492e4646e5de8b43d9a7908d6177fb737b61f0 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Fri, 16 Feb 2007 01:27:34 -0800 Subject: [PATCH] x86: rewrite SMP TSC sync code make the TSC synchronization code more robust, and unify it between x86_64 and i386. The biggest change is the removal of the 'fix up TSCs' code on x86_64 and i386, in some rare cases it was /causing/ time-warps on SMP systems. The new code only checks for TSC asynchronity - and if it can prove a time-warp (if it can observe the TSC going backwards when going from one CPU to another within a critical section), then the TSC clock-source is turned off. The TSC synchronization-checking code also got moved into a separate file. Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner Cc: john stultz Cc: Roman Zippel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/Makefile | 2 +- arch/i386/kernel/smpboot.c | 178 +++----------------------------- arch/i386/kernel/tsc.c | 4 +- arch/i386/kernel/tsc_sync.c | 1 + arch/x86_64/kernel/Makefile | 2 +- arch/x86_64/kernel/smpboot.c | 230 ++---------------------------------------- arch/x86_64/kernel/time.c | 11 ++ arch/x86_64/kernel/tsc_sync.c | 187 ++++++++++++++++++++++++++++++++++ 8 files changed, 227 insertions(+), 388 deletions(-) create mode 100644 arch/i386/kernel/tsc_sync.c create mode 100644 arch/x86_64/kernel/tsc_sync.c (limited to 'arch') diff --git a/arch/i386/kernel/Makefile b/arch/i386/kernel/Makefile index cbe4e601885c..c2b3b79dc436 100644 --- a/arch/i386/kernel/Makefile +++ b/arch/i386/kernel/Makefile @@ -18,7 +18,7 @@ obj-$(CONFIG_X86_MSR) += msr.o obj-$(CONFIG_X86_CPUID) += cpuid.o obj-$(CONFIG_MICROCODE) += microcode.o obj-$(CONFIG_APM) += apm.o -obj-$(CONFIG_X86_SMP) += smp.o smpboot.o +obj-$(CONFIG_X86_SMP) += smp.o smpboot.o tsc_sync.o obj-$(CONFIG_X86_TRAMPOLINE) += trampoline.o obj-$(CONFIG_X86_MPPARSE) += mpparse.o obj-$(CONFIG_X86_LOCAL_APIC) += apic.o nmi.o diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c index f46a4d095e6c..6ddffe8aabb2 100644 --- a/arch/i386/kernel/smpboot.c +++ b/arch/i386/kernel/smpboot.c @@ -94,12 +94,6 @@ cpumask_t cpu_possible_map; EXPORT_SYMBOL(cpu_possible_map); static cpumask_t smp_commenced_mask; -/* TSC's upper 32 bits can't be written in eariler CPU (before prescott), there - * is no way to resync one AP against BP. TBD: for prescott and above, we - * should use IA64's algorithm - */ -static int __devinitdata tsc_sync_disabled; - /* Per CPU bogomips and other parameters */ struct cpuinfo_x86 cpu_data[NR_CPUS] __cacheline_aligned; EXPORT_SYMBOL(cpu_data); @@ -216,151 +210,6 @@ valid_k7: ; } -/* - * TSC synchronization. - * - * We first check whether all CPUs have their TSC's synchronized, - * then we print a warning if not, and always resync. - */ - -static struct { - atomic_t start_flag; - atomic_t count_start; - atomic_t count_stop; - unsigned long long values[NR_CPUS]; -} tsc __cpuinitdata = { - .start_flag = ATOMIC_INIT(0), - .count_start = ATOMIC_INIT(0), - .count_stop = ATOMIC_INIT(0), -}; - -#define NR_LOOPS 5 - -static void __init synchronize_tsc_bp(void) -{ - int i; - unsigned long long t0; - unsigned long long sum, avg; - long long delta; - unsigned int one_usec; - int buggy = 0; - - printk(KERN_INFO "checking TSC synchronization across %u CPUs: ", num_booting_cpus()); - - /* convert from kcyc/sec to cyc/usec */ - one_usec = cpu_khz / 1000; - - atomic_set(&tsc.start_flag, 1); - wmb(); - - /* - * We loop a few times to get a primed instruction cache, - * then the last pass is more or less synchronized and - * the BP and APs set their cycle counters to zero all at - * once. This reduces the chance of having random offsets - * between the processors, and guarantees that the maximum - * delay between the cycle counters is never bigger than - * the latency of information-passing (cachelines) between - * two CPUs. - */ - for (i = 0; i < NR_LOOPS; i++) { - /* - * all APs synchronize but they loop on '== num_cpus' - */ - while (atomic_read(&tsc.count_start) != num_booting_cpus()-1) - cpu_relax(); - atomic_set(&tsc.count_stop, 0); - wmb(); - /* - * this lets the APs save their current TSC: - */ - atomic_inc(&tsc.count_start); - - rdtscll(tsc.values[smp_processor_id()]); - /* - * We clear the TSC in the last loop: - */ - if (i == NR_LOOPS-1) - write_tsc(0, 0); - - /* - * Wait for all APs to leave the synchronization point: - */ - while (atomic_read(&tsc.count_stop) != num_booting_cpus()-1) - cpu_relax(); - atomic_set(&tsc.count_start, 0); - wmb(); - atomic_inc(&tsc.count_stop); - } - - sum = 0; - for (i = 0; i < NR_CPUS; i++) { - if (cpu_isset(i, cpu_callout_map)) { - t0 = tsc.values[i]; - sum += t0; - } - } - avg = sum; - do_div(avg, num_booting_cpus()); - - for (i = 0; i < NR_CPUS; i++) { - if (!cpu_isset(i, cpu_callout_map)) - continue; - delta = tsc.values[i] - avg; - if (delta < 0) - delta = -delta; - /* - * We report bigger than 2 microseconds clock differences. - */ - if (delta > 2*one_usec) { - long long realdelta; - - if (!buggy) { - buggy = 1; - printk("\n"); - } - realdelta = delta; - do_div(realdelta, one_usec); - if (tsc.values[i] < avg) - realdelta = -realdelta; - - if (realdelta) - printk(KERN_INFO "CPU#%d had %Ld usecs TSC " - "skew, fixed it up.\n", i, realdelta); - } - } - if (!buggy) - printk("passed.\n"); -} - -static void __cpuinit synchronize_tsc_ap(void) -{ - int i; - - /* - * Not every cpu is online at the time - * this gets called, so we first wait for the BP to - * finish SMP initialization: - */ - while (!atomic_read(&tsc.start_flag)) - cpu_relax(); - - for (i = 0; i < NR_LOOPS; i++) { - atomic_inc(&tsc.count_start); - while (atomic_read(&tsc.count_start) != num_booting_cpus()) - cpu_relax(); - - rdtscll(tsc.values[smp_processor_id()]); - if (i == NR_LOOPS-1) - write_tsc(0, 0); - - atomic_inc(&tsc.count_stop); - while (atomic_read(&tsc.count_stop) != num_booting_cpus()) - cpu_relax(); - } -} -#undef NR_LOOPS - extern void calibrate_delay(void); static atomic_t init_deasserted; @@ -446,12 +295,6 @@ static void __cpuinit smp_callin(void) * Allow the master to continue. */ cpu_set(cpuid, cpu_callin_map); - - /* - * Synchronize the TSC with the BP - */ - if (cpu_has_tsc && cpu_khz && !tsc_sync_disabled) - synchronize_tsc_ap(); } static int cpucount; @@ -554,6 +397,11 @@ static void __cpuinit start_secondary(void *unused) smp_callin(); while (!cpu_isset(smp_processor_id(), smp_commenced_mask)) rep_nop(); + /* + * Check TSC synchronization with the BP: + */ + check_tsc_sync_target(); + setup_secondary_clock(); if (nmi_watchdog == NMI_IO_APIC) { disable_8259A_irq(0); @@ -1125,8 +973,6 @@ static int __cpuinit __smp_prepare_cpu(int cpu) info.cpu = cpu; INIT_WORK(&info.task, do_warm_boot_cpu); - tsc_sync_disabled = 1; - /* init low mem mapping */ clone_pgd_range(swapper_pg_dir, swapper_pg_dir + USER_PGD_PTRS, min_t(unsigned long, KERNEL_PGD_PTRS, USER_PGD_PTRS)); @@ -1134,7 +980,6 @@ static int __cpuinit __smp_prepare_cpu(int cpu) schedule_work(&info.task); wait_for_completion(&done); - tsc_sync_disabled = 0; zap_low_mappings(); ret = 0; exit: @@ -1331,12 +1176,6 @@ static void __init smp_boot_cpus(unsigned int max_cpus) smpboot_setup_io_apic(); setup_boot_clock(); - - /* - * Synchronize the TSC with the AP - */ - if (cpu_has_tsc && cpucount && cpu_khz) - synchronize_tsc_bp(); } /* These are wrappers to interface to the new boot process. Someone @@ -1471,9 +1310,16 @@ int __cpuinit __cpu_up(unsigned int cpu) } local_irq_enable(); + per_cpu(cpu_state, cpu) = CPU_UP_PREPARE; /* Unleash the CPU! */ cpu_set(cpu, smp_commenced_mask); + + /* + * Check TSC synchronization with the AP: + */ + check_tsc_sync_source(cpu); + while (!cpu_isset(cpu, cpu_online_map)) cpu_relax(); diff --git a/arch/i386/kernel/tsc.c b/arch/i386/kernel/tsc.c index 6f6971da761c..0fd93107ff9a 100644 --- a/arch/i386/kernel/tsc.c +++ b/arch/i386/kernel/tsc.c @@ -406,8 +406,10 @@ out: * Make an educated guess if the TSC is trustworthy and synchronized * over all CPUs. */ -static __init int unsynchronized_tsc(void) +__cpuinit int unsynchronized_tsc(void) { + if (!cpu_has_tsc || tsc_unstable) + return 1; /* * Intel systems are normally all synchronized. * Exceptions must mark TSC as unstable: diff --git a/arch/i386/kernel/tsc_sync.c b/arch/i386/kernel/tsc_sync.c new file mode 100644 index 000000000000..12424629af87 --- /dev/null +++ b/arch/i386/kernel/tsc_sync.c @@ -0,0 +1 @@ +#include "../../x86_64/kernel/tsc_sync.c" diff --git a/arch/x86_64/kernel/Makefile b/arch/x86_64/kernel/Makefile index ae399458024b..6465eee6d920 100644 --- a/arch/x86_64/kernel/Makefile +++ b/arch/x86_64/kernel/Makefile @@ -19,7 +19,7 @@ obj-$(CONFIG_ACPI) += acpi/ obj-$(CONFIG_X86_MSR) += msr.o obj-$(CONFIG_MICROCODE) += microcode.o obj-$(CONFIG_X86_CPUID) += cpuid.o -obj-$(CONFIG_SMP) += smp.o smpboot.o trampoline.o +obj-$(CONFIG_SMP) += smp.o smpboot.o trampoline.o tsc_sync.o obj-y += apic.o nmi.o obj-y += io_apic.o mpparse.o \ genapic.o genapic_cluster.o genapic_flat.o diff --git a/arch/x86_64/kernel/smpboot.c b/arch/x86_64/kernel/smpboot.c index daf19332f0dd..62d828433c30 100644 --- a/arch/x86_64/kernel/smpboot.c +++ b/arch/x86_64/kernel/smpboot.c @@ -148,217 +148,6 @@ static void __cpuinit smp_store_cpu_info(int id) print_cpu_info(c); } -/* - * New Funky TSC sync algorithm borrowed from IA64. - * Main advantage is that it doesn't reset the TSCs fully and - * in general looks more robust and it works better than my earlier - * attempts. I believe it was written by David Mosberger. Some minor - * adjustments for x86-64 by me -AK - * - * Original comment reproduced below. - * - * Synchronize TSC of the current (slave) CPU with the TSC of the - * MASTER CPU (normally the time-keeper CPU). We use a closed loop to - * eliminate the possibility of unaccounted-for errors (such as - * getting a machine check in the middle of a calibration step). The - * basic idea is for the slave to ask the master what itc value it has - * and to read its own itc before and after the master responds. Each - * iteration gives us three timestamps: - * - * slave master - * - * t0 ---\ - * ---\ - * ---> - * tm - * /--- - * /--- - * t1 <--- - * - * - * The goal is to adjust the slave's TSC such that tm falls exactly - * half-way between t0 and t1. If we achieve this, the clocks are - * synchronized provided the interconnect between the slave and the - * master is symmetric. Even if the interconnect were asymmetric, we - * would still know that the synchronization error is smaller than the - * roundtrip latency (t0 - t1). - * - * When the interconnect is quiet and symmetric, this lets us - * synchronize the TSC to within one or two cycles. However, we can - * only *guarantee* that the synchronization is accurate to within a - * round-trip time, which is typically in the range of several hundred - * cycles (e.g., ~500 cycles). In practice, this means that the TSCs - * are usually almost perfectly synchronized, but we shouldn't assume - * that the accuracy is much better than half a micro second or so. - * - * [there are other errors like the latency of RDTSC and of the - * WRMSR. These can also account to hundreds of cycles. So it's - * probably worse. It claims 153 cycles error on a dual Opteron, - * but I suspect the numbers are actually somewhat worse -AK] - */ - -#define MASTER 0 -#define SLAVE (SMP_CACHE_BYTES/8) - -/* Intentionally don't use cpu_relax() while TSC synchronization - because we don't want to go into funky power save modi or cause - hypervisors to schedule us away. Going to sleep would likely affect - latency and low latency is the primary objective here. -AK */ -#define no_cpu_relax() barrier() - -static __cpuinitdata DEFINE_SPINLOCK(tsc_sync_lock); -static volatile __cpuinitdata unsigned long go[SLAVE + 1]; -static int notscsync __cpuinitdata; - -#undef DEBUG_TSC_SYNC - -#define NUM_ROUNDS 64 /* magic value */ -#define NUM_ITERS 5 /* likewise */ - -/* Callback on boot CPU */ -static __cpuinit void sync_master(void *arg) -{ - unsigned long flags, i; - - go[MASTER] = 0; - - local_irq_save(flags); - { - for (i = 0; i < NUM_ROUNDS*NUM_ITERS; ++i) { - while (!go[MASTER]) - no_cpu_relax(); - go[MASTER] = 0; - rdtscll(go[SLAVE]); - } - } - local_irq_restore(flags); -} - -/* - * Return the number of cycles by which our tsc differs from the tsc - * on the master (time-keeper) CPU. A positive number indicates our - * tsc is ahead of the master, negative that it is behind. - */ -static inline long -get_delta(long *rt, long *master) -{ - unsigned long best_t0 = 0, best_t1 = ~0UL, best_tm = 0; - unsigned long tcenter, t0, t1, tm; - int i; - - for (i = 0; i < NUM_ITERS; ++i) { - rdtscll(t0); - go[MASTER] = 1; - while (!(tm = go[SLAVE])) - no_cpu_relax(); - go[SLAVE] = 0; - rdtscll(t1); - - if (t1 - t0 < best_t1 - best_t0) - best_t0 = t0, best_t1 = t1, best_tm = tm; - } - - *rt = best_t1 - best_t0; - *master = best_tm - best_t0; - - /* average best_t0 and best_t1 without overflow: */ - tcenter = (best_t0/2 + best_t1/2); - if (best_t0 % 2 + best_t1 % 2 == 2) - ++tcenter; - return tcenter - best_tm; -} - -static __cpuinit void sync_tsc(unsigned int master) -{ - int i, done = 0; - long delta, adj, adjust_latency = 0; - unsigned long flags, rt, master_time_stamp, bound; -#ifdef DEBUG_TSC_SYNC - static struct syncdebug { - long rt; /* roundtrip time */ - long master; /* master's timestamp */ - long diff; /* difference between midpoint and master's timestamp */ - long lat; /* estimate of tsc adjustment latency */ - } t[NUM_ROUNDS] __cpuinitdata; -#endif - - printk(KERN_INFO "CPU %d: Syncing TSC to CPU %u.\n", - smp_processor_id(), master); - - go[MASTER] = 1; - - /* It is dangerous to broadcast IPI as cpus are coming up, - * as they may not be ready to accept them. So since - * we only need to send the ipi to the boot cpu direct - * the message, and avoid the race. - */ - smp_call_function_single(master, sync_master, NULL, 1, 0); - - while (go[MASTER]) /* wait for master to be ready */ - no_cpu_relax(); - - spin_lock_irqsave(&tsc_sync_lock, flags); - { - for (i = 0; i < NUM_ROUNDS; ++i) { - delta = get_delta(&rt, &master_time_stamp); - if (delta == 0) { - done = 1; /* let's lock on to this... */ - bound = rt; - } - - if (!done) { - unsigned long t; - if (i > 0) { - adjust_latency += -delta; - adj = -delta + adjust_latency/4; - } else - adj = -delta; - - rdtscll(t); - wrmsrl(MSR_IA32_TSC, t + adj); - } -#ifdef DEBUG_TSC_SYNC - t[i].rt = rt; - t[i].master = master_time_stamp; - t[i].diff = delta; - t[i].lat = adjust_latency/4; -#endif - } - } - spin_unlock_irqrestore(&tsc_sync_lock, flags); - -#ifdef DEBUG_TSC_SYNC - for (i = 0; i < NUM_ROUNDS; ++i) - printk("rt=%5ld master=%5ld diff=%5ld adjlat=%5ld\n", - t[i].rt, t[i].master, t[i].diff, t[i].lat); -#endif - - printk(KERN_INFO - "CPU %d: synchronized TSC with CPU %u (last diff %ld cycles, " - "maxerr %lu cycles)\n", - smp_processor_id(), master, delta, rt); -} - -static void __cpuinit tsc_sync_wait(void) -{ - /* - * When the CPU has synchronized TSCs assume the BIOS - * or the hardware already synced. Otherwise we could - * mess up a possible perfect synchronization with a - * not-quite-perfect algorithm. - */ - if (notscsync || !cpu_has_tsc || !unsynchronized_tsc()) - return; - sync_tsc(0); -} - -static __init int notscsync_setup(char *s) -{ - notscsync = 1; - return 1; -} -__setup("notscsync", notscsync_setup); - static atomic_t init_deasserted __cpuinitdata; /* @@ -546,6 +335,11 @@ void __cpuinit start_secondary(void) /* otherwise gcc will move up the smp_processor_id before the cpu_init */ barrier(); + /* + * Check TSC sync first: + */ + check_tsc_sync_target(); + Dprintk("cpu %d: setting up apic clock\n", smp_processor_id()); setup_secondary_APIC_clock(); @@ -565,14 +359,6 @@ void __cpuinit start_secondary(void) */ set_cpu_sibling_map(smp_processor_id()); - /* - * Wait for TSC sync to not schedule things before. - * We still process interrupts, which could see an inconsistent - * time in that window unfortunately. - * Do this here because TSC sync has global unprotected state. - */ - tsc_sync_wait(); - /* * We need to hold call_lock, so there is no inconsistency * between the time smp_call_function() determines number of @@ -592,6 +378,7 @@ void __cpuinit start_secondary(void) cpu_set(smp_processor_id(), cpu_online_map); per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE; spin_unlock(&vector_lock); + unlock_ipi_call_lock(); cpu_idle(); @@ -1168,6 +955,11 @@ int __cpuinit __cpu_up(unsigned int cpu) /* Unleash the CPU! */ Dprintk("waiting for cpu %d\n", cpu); + /* + * Make sure and check TSC sync: + */ + check_tsc_sync_source(cpu); + while (!cpu_isset(cpu, cpu_online_map)) cpu_relax(); diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c index 3cc6886f1fb7..8cb2b2d35f5d 100644 --- a/arch/x86_64/kernel/time.c +++ b/arch/x86_64/kernel/time.c @@ -944,12 +944,23 @@ void __init time_init(void) #endif } +static int tsc_unstable = 0; + +void mark_tsc_unstable(void) +{ + tsc_unstable = 1; +} +EXPORT_SYMBOL_GPL(mark_tsc_unstable); + /* * Make an educated guess if the TSC is trustworthy and synchronized * over all CPUs. */ __cpuinit int unsynchronized_tsc(void) { + if (tsc_unstable) + return 1; + #ifdef CONFIG_SMP if (apic_is_clustered_box()) return 1; diff --git a/arch/x86_64/kernel/tsc_sync.c b/arch/x86_64/kernel/tsc_sync.c new file mode 100644 index 000000000000..014f0db45dfa --- /dev/null +++ b/arch/x86_64/kernel/tsc_sync.c @@ -0,0 +1,187 @@ +/* + * arch/x86_64/kernel/tsc_sync.c: check TSC synchronization. + * + * Copyright (C) 2006, Red Hat, Inc., Ingo Molnar + * + * We check whether all boot CPUs have their TSC's synchronized, + * print a warning if not and turn off the TSC clock-source. + * + * The warp-check is point-to-point between two CPUs, the CPU + * initiating the bootup is the 'source CPU', the freshly booting + * CPU is the 'target CPU'. + * + * Only two CPUs may participate - they can enter in any order. + * ( The serial nature of the boot logic and the CPU hotplug lock + * protects against more than 2 CPUs entering this code. ) + */ +#include +#include +#include +#include +#include +#include + +/* + * Entry/exit counters that make sure that both CPUs + * run the measurement code at once: + */ +static __cpuinitdata atomic_t start_count; +static __cpuinitdata atomic_t stop_count; + +/* + * We use a raw spinlock in this exceptional case, because + * we want to have the fastest, inlined, non-debug version + * of a critical section, to be able to prove TSC time-warps: + */ +static __cpuinitdata raw_spinlock_t sync_lock = __RAW_SPIN_LOCK_UNLOCKED; +static __cpuinitdata cycles_t last_tsc; +static __cpuinitdata cycles_t max_warp; +static __cpuinitdata int nr_warps; + +/* + * TSC-warp measurement loop running on both CPUs: + */ +static __cpuinit void check_tsc_warp(void) +{ + cycles_t start, now, prev, end; + int i; + + start = get_cycles_sync(); + /* + * The measurement runs for 20 msecs: + */ + end = start + cpu_khz * 20ULL; + now = start; + + for (i = 0; ; i++) { + /* + * We take the global lock, measure TSC, save the + * previous TSC that was measured (possibly on + * another CPU) and update the previous TSC timestamp. + */ + __raw_spin_lock(&sync_lock); + prev = last_tsc; + now = get_cycles_sync(); + last_tsc = now; + __raw_spin_unlock(&sync_lock); + + /* + * Be nice every now and then (and also check whether + * measurement is done [we also insert a 100 million + * loops safety exit, so we dont lock up in case the + * TSC readout is totally broken]): + */ + if (unlikely(!(i & 7))) { + if (now > end || i > 100000000) + break; + cpu_relax(); + touch_nmi_watchdog(); + } + /* + * Outside the critical section we can now see whether + * we saw a time-warp of the TSC going backwards: + */ + if (unlikely(prev > now)) { + __raw_spin_lock(&sync_lock); + max_warp = max(max_warp, prev - now); + nr_warps++; + __raw_spin_unlock(&sync_lock); + } + + } +} + +/* + * Source CPU calls into this - it waits for the freshly booted + * target CPU to arrive and then starts the measurement: + */ +void __cpuinit check_tsc_sync_source(int cpu) +{ + int cpus = 2; + + /* + * No need to check if we already know that the TSC is not + * synchronized: + */ + if (unsynchronized_tsc()) + return; + + printk(KERN_INFO "checking TSC synchronization [CPU#%d -> CPU#%d]:", + smp_processor_id(), cpu); + + /* + * Reset it - in case this is a second bootup: + */ + atomic_set(&stop_count, 0); + + /* + * Wait for the target to arrive: + */ + while (atomic_read(&start_count) != cpus-1) + cpu_relax(); + /* + * Trigger the target to continue into the measurement too: + */ + atomic_inc(&start_count); + + check_tsc_warp(); + + while (atomic_read(&stop_count) != cpus-1) + cpu_relax(); + + /* + * Reset it - just in case we boot another CPU later: + */ + atomic_set(&start_count, 0); + + if (nr_warps) { + printk("\n"); + printk(KERN_WARNING "Measured %Ld cycles TSC warp between CPUs," + " turning off TSC clock.\n", max_warp); + mark_tsc_unstable(); + nr_warps = 0; + max_warp = 0; + last_tsc = 0; + } else { + printk(" passed.\n"); + } + + /* + * Let the target continue with the bootup: + */ + atomic_inc(&stop_count); +} + +/* + * Freshly booted CPUs call into this: + */ +void __cpuinit check_tsc_sync_target(void) +{ + int cpus = 2; + + if (unsynchronized_tsc()) + return; + + /* + * Register this CPU's participation and wait for the + * source CPU to start the measurement: + */ + atomic_inc(&start_count); + while (atomic_read(&start_count) != cpus) + cpu_relax(); + + check_tsc_warp(); + + /* + * Ok, we are done: + */ + atomic_inc(&stop_count); + + /* + * Wait for the source CPU to print stuff: + */ + while (atomic_read(&stop_count) != cpus) + cpu_relax(); +} +#undef NR_LOOPS + -- cgit v1.2.3 From 73b08d2aa4245806ef1bdd48463e9a0b045c62cf Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 16 Feb 2007 01:27:36 -0800 Subject: [PATCH] clocksource: replace is_continuous by a flag field Using a flag filed allows to encode more than one information into a variable. Preparatory patch for the generic clocksource verification. [mingo@elte.hu: convert vmitime.c to the new clocksource flag] Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar Cc: john stultz Cc: Roman Zippel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/hpet.c | 2 +- arch/i386/kernel/tsc.c | 7 +++++-- arch/i386/kernel/vmitime.c | 2 +- 3 files changed, 7 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/hpet.c b/arch/i386/kernel/hpet.c index 0b29d41322a2..7d2739fff3a3 100644 --- a/arch/i386/kernel/hpet.c +++ b/arch/i386/kernel/hpet.c @@ -26,7 +26,7 @@ static struct clocksource clocksource_hpet = { .mask = HPET_MASK, .mult = 0, /* set below */ .shift = HPET_SHIFT, - .is_continuous = 1, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; static int __init init_hpet_clocksource(void) diff --git a/arch/i386/kernel/tsc.c b/arch/i386/kernel/tsc.c index 0fd93107ff9a..a37654991788 100644 --- a/arch/i386/kernel/tsc.c +++ b/arch/i386/kernel/tsc.c @@ -314,7 +314,8 @@ static struct clocksource clocksource_tsc = { .mult = 0, /* to be set */ .shift = 22, .update_callback = tsc_update_callback, - .is_continuous = 1, + .flags = CLOCK_SOURCE_IS_CONTINUOUS | + CLOCK_SOURCE_MUST_VERIFY, }; static int tsc_update_callback(void) @@ -434,8 +435,10 @@ static int __init init_tsc_clocksource(void) clocksource_tsc.mult = clocksource_khz2mult(current_tsc_khz, clocksource_tsc.shift); /* lower the rating if we already know its unstable: */ - if (check_tsc_unstable()) + if (check_tsc_unstable()) { clocksource_tsc.rating = 0; + clocksource_tsc.flags &= ~CLOCK_SOURCE_IS_CONTINUOUS; + } init_timer(&verify_tsc_freq_timer); verify_tsc_freq_timer.function = verify_tsc_freq; diff --git a/arch/i386/kernel/vmitime.c b/arch/i386/kernel/vmitime.c index 2e2d8dbcbd68..76d2adcae5a3 100644 --- a/arch/i386/kernel/vmitime.c +++ b/arch/i386/kernel/vmitime.c @@ -115,7 +115,7 @@ static struct clocksource clocksource_vmi = { .mask = CLOCKSOURCE_MASK(64), .mult = 0, /* to be set */ .shift = 22, - .is_continuous = 1, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; -- cgit v1.2.3 From c66699a749eb0d84c6ebc3aac659e9f71d1aba14 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 16 Feb 2007 01:27:37 -0800 Subject: [PATCH] clocksource: fixup is_continous changes on ARM Fixup the is_contionous replacement by a flag field. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar Cc: Russell King Cc: john stultz Cc: Roman Zippel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/arm/mach-imx/time.c | 2 +- arch/arm/mach-ixp4xx/common.c | 2 +- arch/arm/mach-netx/time.c | 2 +- arch/arm/mach-pxa/time.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c index 40039b2a90b3..2703a730baf7 100644 --- a/arch/arm/mach-imx/time.c +++ b/arch/arm/mach-imx/time.c @@ -87,7 +87,7 @@ static struct clocksource clocksource_imx = { .read = imx_get_cycles, .mask = 0xFFFFFFFF, .shift = 20, - .is_continuous = 1, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; static int __init imx_clocksource_init(void) diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index 2ec9a9e9a04d..45068c3d8dcc 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -395,7 +395,7 @@ static struct clocksource clocksource_ixp4xx = { .read = ixp4xx_get_cycles, .mask = CLOCKSOURCE_MASK(32), .shift = 20, - .is_continuous = 1, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; unsigned long ixp4xx_timer_freq = FREQ; diff --git a/arch/arm/mach-netx/time.c b/arch/arm/mach-netx/time.c index 5773b55ef4a6..7e132fcccd47 100644 --- a/arch/arm/mach-netx/time.c +++ b/arch/arm/mach-netx/time.c @@ -62,7 +62,7 @@ static struct clocksource clocksource_netx = { .read = netx_get_cycles, .mask = CLOCKSOURCE_MASK(32), .shift = 20, - .is_continuous = 1, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; /* diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c index ee2beb400414..fc3b82a740a0 100644 --- a/arch/arm/mach-pxa/time.c +++ b/arch/arm/mach-pxa/time.c @@ -112,7 +112,7 @@ static struct clocksource clocksource_pxa = { .read = pxa_get_cycles, .mask = CLOCKSOURCE_MASK(32), .shift = 20, - .is_continuous = 1, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; static void __init pxa_timer_init(void) -- cgit v1.2.3 From 2693506c41c20362eefb38005ee34dca7ac8dc71 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 16 Feb 2007 01:27:38 -0800 Subject: [PATCH] clocksource: fixup is_continous changes on AVR32 Fixup the is_contionous replacement by a flag field. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar Cc: Haavard Skinnemoen Cc: john stultz Cc: Roman Zippel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/avr32/kernel/time.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/avr32/kernel/time.c b/arch/avr32/kernel/time.c index a2f74affaa98..c10833f2ee0c 100644 --- a/arch/avr32/kernel/time.c +++ b/arch/avr32/kernel/time.c @@ -37,7 +37,7 @@ static struct clocksource clocksource_avr32 = { .read = read_cycle_count, .mask = CLOCKSOURCE_MASK(32), .shift = 16, - .is_continuous = 1, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; /* -- cgit v1.2.3 From cc02d809cc629f4e90b917aa0f9efea85221ccdb Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 16 Feb 2007 01:27:39 -0800 Subject: [PATCH] clocksource: fixup is_continous changes on S390 Fixup the is_contionous replacement by a flag field. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar Cc: Martin Schwidefsky Cc: john stultz Cc: Roman Zippel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/s390/kernel/time.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c index 3b91f27ab202..ee9fd7b85928 100644 --- a/arch/s390/kernel/time.c +++ b/arch/s390/kernel/time.c @@ -312,7 +312,7 @@ static struct clocksource clocksource_tod = { .mask = -1ULL, .mult = 1000, .shift = 12, - .is_continuous = 1, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; -- cgit v1.2.3 From 877fe38029366c19def24359627db8cc24d9fef6 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 16 Feb 2007 01:27:40 -0800 Subject: [PATCH] clocksource: fixup is_continous changes on MIPS Fixup the is_contionous replacement by a flag field. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar Cc: Ralf Baechle Cc: john stultz Cc: Roman Zippel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/mips/kernel/time.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c index 545fcbc8cea2..e5e56bd498db 100644 --- a/arch/mips/kernel/time.c +++ b/arch/mips/kernel/time.c @@ -307,7 +307,7 @@ static unsigned int __init calibrate_hpt(void) struct clocksource clocksource_mips = { .name = "MIPS", .mask = 0xffffffff, - .is_continuous = 1, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; static void __init init_mips_clocksource(void) -- cgit v1.2.3 From 7e69f2b1ead2a4c51c12817f18263ff0e59335a6 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 16 Feb 2007 01:27:42 -0800 Subject: [PATCH] clocksource: Remove the update callback The clocksource code allows direct updates of the rating of a given clocksource now. Change TSC unstable tracking to use this interface and remove the update callback. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar Cc: john stultz Cc: Roman Zippel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/tsc.c | 50 +++++++++++++++++--------------------------------- 1 file changed, 17 insertions(+), 33 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/tsc.c b/arch/i386/kernel/tsc.c index a37654991788..b4b2be21d1c7 100644 --- a/arch/i386/kernel/tsc.c +++ b/arch/i386/kernel/tsc.c @@ -60,12 +60,6 @@ static inline int check_tsc_unstable(void) return tsc_unstable; } -void mark_tsc_unstable(void) -{ - tsc_unstable = 1; -} -EXPORT_SYMBOL_GPL(mark_tsc_unstable); - /* Accellerators for sched_clock() * convert from cycles(64bits) => nanoseconds (64bits) * basic equation: @@ -295,7 +289,6 @@ core_initcall(cpufreq_tsc); /* clock source code */ static unsigned long current_tsc_khz = 0; -static int tsc_update_callback(void); static cycle_t read_tsc(void) { @@ -313,37 +306,28 @@ static struct clocksource clocksource_tsc = { .mask = CLOCKSOURCE_MASK(64), .mult = 0, /* to be set */ .shift = 22, - .update_callback = tsc_update_callback, .flags = CLOCK_SOURCE_IS_CONTINUOUS | CLOCK_SOURCE_MUST_VERIFY, }; -static int tsc_update_callback(void) +void mark_tsc_unstable(void) { - int change = 0; - - /* check to see if we should switch to the safe clocksource: */ - if (clocksource_tsc.rating != 0 && check_tsc_unstable()) { - clocksource_change_rating(&clocksource_tsc, 0); - change = 1; - } - - /* only update if tsc_khz has changed: */ - if (current_tsc_khz != tsc_khz) { - current_tsc_khz = tsc_khz; - clocksource_tsc.mult = clocksource_khz2mult(current_tsc_khz, - clocksource_tsc.shift); - change = 1; + if (!tsc_unstable) { + tsc_unstable = 1; + /* Can be called before registration */ + if (clocksource_tsc.mult) + clocksource_change_rating(&clocksource_tsc, 0); + else + clocksource_tsc.rating = 0; } - - return change; } +EXPORT_SYMBOL_GPL(mark_tsc_unstable); static int __init dmi_mark_tsc_unstable(struct dmi_system_id *d) { printk(KERN_NOTICE "%s detected: marking TSC unstable.\n", d->ident); - mark_tsc_unstable(); + tsc_unstable = 1; return 0; } @@ -415,11 +399,12 @@ __cpuinit int unsynchronized_tsc(void) * Intel systems are normally all synchronized. * Exceptions must mark TSC as unstable: */ - if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) - return 0; - - /* assume multi socket systems are not synchronized: */ - return num_possible_cpus() > 1; + if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL) { + /* assume multi socket systems are not synchronized: */ + if (num_possible_cpus() > 1) + tsc_unstable = 1; + } + return tsc_unstable; } static int __init init_tsc_clocksource(void) @@ -429,8 +414,7 @@ static int __init init_tsc_clocksource(void) /* check blacklist */ dmi_check_system(bad_tsc_dmi_table); - if (unsynchronized_tsc()) /* mark unstable if unsynced */ - mark_tsc_unstable(); + unsynchronized_tsc(); current_tsc_khz = tsc_khz; clocksource_tsc.mult = clocksource_khz2mult(current_tsc_khz, clocksource_tsc.shift); -- cgit v1.2.3 From 5d8b34fdcb384161552d01ee8f34af5ff11f9684 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 16 Feb 2007 01:27:43 -0800 Subject: [PATCH] clocksource: Add verification (watchdog) helper The TSC needs to be verified against another clocksource. Instead of using hardwired assumptions of available hardware, provide a generic verification mechanism. The verification uses the best available clocksource and handles the usability for high resolution timers / dynticks of the clocksource which needs to be verified. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar Cc: john stultz Cc: Roman Zippel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/Kconfig | 4 ++++ arch/i386/kernel/tsc.c | 49 ------------------------------------------------- 2 files changed, 4 insertions(+), 49 deletions(-) (limited to 'arch') diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig index 4ea31c327d1f..458b3aad3eb3 100644 --- a/arch/i386/Kconfig +++ b/arch/i386/Kconfig @@ -18,6 +18,10 @@ config GENERIC_TIME bool default y +config CLOCKSOURCE_WATCHDOG + bool + default y + config LOCKDEP_SUPPORT bool default y diff --git a/arch/i386/kernel/tsc.c b/arch/i386/kernel/tsc.c index b4b2be21d1c7..22931d24027c 100644 --- a/arch/i386/kernel/tsc.c +++ b/arch/i386/kernel/tsc.c @@ -344,49 +344,6 @@ static struct dmi_system_id __initdata bad_tsc_dmi_table[] = { {} }; -#define TSC_FREQ_CHECK_INTERVAL (10*MSEC_PER_SEC) /* 10sec in MS */ -static struct timer_list verify_tsc_freq_timer; - -/* XXX - Probably should add locking */ -static void verify_tsc_freq(unsigned long unused) -{ - static u64 last_tsc; - static unsigned long last_jiffies; - - u64 now_tsc, interval_tsc; - unsigned long now_jiffies, interval_jiffies; - - - if (check_tsc_unstable()) - return; - - rdtscll(now_tsc); - now_jiffies = jiffies; - - if (!last_jiffies) { - goto out; - } - - interval_jiffies = now_jiffies - last_jiffies; - interval_tsc = now_tsc - last_tsc; - interval_tsc *= HZ; - do_div(interval_tsc, cpu_khz*1000); - - if (interval_tsc < (interval_jiffies * 3 / 4)) { - printk("TSC appears to be running slowly. " - "Marking it as unstable\n"); - mark_tsc_unstable(); - return; - } - -out: - last_tsc = now_tsc; - last_jiffies = now_jiffies; - /* set us up to go off on the next interval: */ - mod_timer(&verify_tsc_freq_timer, - jiffies + msecs_to_jiffies(TSC_FREQ_CHECK_INTERVAL)); -} - /* * Make an educated guess if the TSC is trustworthy and synchronized * over all CPUs. @@ -424,12 +381,6 @@ static int __init init_tsc_clocksource(void) clocksource_tsc.flags &= ~CLOCK_SOURCE_IS_CONTINUOUS; } - init_timer(&verify_tsc_freq_timer); - verify_tsc_freq_timer.function = verify_tsc_freq; - verify_tsc_freq_timer.expires = - jiffies + msecs_to_jiffies(TSC_FREQ_CHECK_INTERVAL); - add_timer(&verify_tsc_freq_timer); - return clocksource_register(&clocksource_tsc); } -- cgit v1.2.3 From 07190a08eef3666a8687070226c8d403c1d548b7 Mon Sep 17 00:00:00 2001 From: Marcelo Tosatti Date: Fri, 16 Feb 2007 01:27:44 -0800 Subject: [PATCH] Mark TSC on GeodeLX reliable The Geode can safely use the TSC for highres, since: 1) Does not support frequency scaling, 2) The TSC _does_ count when the CPU is halted. Furthermore, the Geode supports a mode called "suspension on halt", where Suspend mode (which interacts with the power management states) is entered. TSC counting during suspend mode is controlled by bit 8 of the Bus Controller Configuration Register #0 (thanks Tom!). 3) no SMP :) Check if "RTSC counts during suspension" and remove the requirement for verification, so the clocksource code can safely select it as an timesource for the highres timers subsystem. Signed-off-by: Marcelo Tosatti Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar Cc: john stultz Cc: Roman Zippel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/tsc.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'arch') diff --git a/arch/i386/kernel/tsc.c b/arch/i386/kernel/tsc.c index 22931d24027c..3082a418635c 100644 --- a/arch/i386/kernel/tsc.c +++ b/arch/i386/kernel/tsc.c @@ -364,6 +364,25 @@ __cpuinit int unsynchronized_tsc(void) return tsc_unstable; } +/* + * Geode_LX - the OLPC CPU has a possibly a very reliable TSC + */ +#ifdef CONFIG_MGEODE_LX +/* RTSC counts during suspend */ +#define RTSC_SUSP 0x100 + +static void __init check_geode_tsc_reliable(void) +{ + unsigned long val; + + rdmsrl(MSR_GEODE_BUSCONT_CONF0, val); + if ((val & RTSC_SUSP)) + clocksource_tsc.flags &= ~CLOCK_SOURCE_MUST_VERIFY; +} +#else +static inline void check_geode_tsc_reliable(void) { } +#endif + static int __init init_tsc_clocksource(void) { @@ -372,6 +391,7 @@ static int __init init_tsc_clocksource(void) dmi_check_system(bad_tsc_dmi_table); unsynchronized_tsc(); + check_geode_tsc_reliable(); current_tsc_khz = tsc_khz; clocksource_tsc.mult = clocksource_khz2mult(current_tsc_khz, clocksource_tsc.shift); -- cgit v1.2.3 From d66bea57e779cd592657cca6e61345ae899b78d9 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 16 Feb 2007 01:27:57 -0800 Subject: [PATCH] Allow early access to the power management timer Allow early access to the power management timer by exposing the verified read function and providing a helper function which checks the pmtmr_ioport variable and returns either the pm timer readout or 0 in case the pm timer is not available. Create a new header file and replace also the ifdef'ed extern definition in arch/i386/kernel/acpi/boot.c This is a preperatory patch for the rework of the local apic timer calibration. No functional changes. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar Cc: john stultz Cc: Roman Zippel Cc: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/acpi/boot.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c index e94aff6888ca..56818cf5bc40 100644 --- a/arch/i386/kernel/acpi/boot.c +++ b/arch/i386/kernel/acpi/boot.c @@ -25,6 +25,7 @@ #include #include +#include #include #include #include @@ -676,10 +677,6 @@ static int __init acpi_parse_hpet(struct acpi_table_header *table) #define acpi_parse_hpet NULL #endif -#ifdef CONFIG_X86_PM_TIMER -extern u32 pmtmr_ioport; -#endif - static int __init acpi_parse_fadt(struct acpi_table_header *table) { -- cgit v1.2.3 From e05d723f98595b2f4d368f63636a997d98703304 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 16 Feb 2007 01:27:58 -0800 Subject: [PATCH] i386, apic: clean up the APIC code The apic code is quite unstructured and missing a lot of comments. - Restructure the code into helper functions, timer, setup/shutdown, interrupt and power management blocks. - Fixup comments. - Namespace fixups - Inline helpers for version and is_integrated - Combine the ack_bad_irq functions No functional changes. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar Cc: Zachary Amsden Cc: "Eric W. Biederman" Cc: Rohit Seth Cc: Andi Kleen Cc: john stultz Cc: Roman Zippel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/apic.c | 2073 ++++++++++++++++++++++---------------------- arch/i386/kernel/io_apic.c | 2 +- arch/i386/kernel/irq.c | 22 +- arch/i386/kernel/smpboot.c | 4 +- 4 files changed, 1075 insertions(+), 1026 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/apic.c b/arch/i386/kernel/apic.c index f4159e0a7ae9..b56448f214a7 100644 --- a/arch/i386/kernel/apic.c +++ b/arch/i386/kernel/apic.c @@ -44,6 +44,13 @@ #include "io_ports.h" +/* + * Sanity check + */ +#if (SPURIOUS_APIC_VECTOR & 0x0F) != 0x0F +# error SPURIOUS_APIC_VECTOR definition error +#endif + /* * cpu_mask that denotes the CPUs that needs timer interrupt coming in as * IPIs in place of local APIC timers @@ -52,561 +59,560 @@ static cpumask_t timer_bcast_ipi; /* * Knob to control our willingness to enable the local APIC. + * + * -1=force-disable, +1=force-enable */ -static int enable_local_apic __initdata = 0; /* -1=force-disable, +1=force-enable */ - -static inline void lapic_disable(void) -{ - enable_local_apic = -1; - clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability); -} - -static inline void lapic_enable(void) -{ - enable_local_apic = 1; -} +static int enable_local_apic __initdata = 0; /* - * Debug level + * Debug level, exported for io_apic.c */ int apic_verbosity; - static void apic_pm_activate(void); -static int modern_apic(void) + +/* Using APIC to generate smp_local_timer_interrupt? */ +int using_apic_timer __read_mostly = 0; + +/* Local APIC was disabled by the BIOS and enabled by the kernel */ +static int enabled_via_apicbase; + +/* + * Get the LAPIC version + */ +static inline int lapic_get_version(void) { - unsigned int lvr, version; - /* AMD systems use old APIC versions, so check the CPU */ - if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD && - boot_cpu_data.x86 >= 0xf) - return 1; - lvr = apic_read(APIC_LVR); - version = GET_APIC_VERSION(lvr); - return version >= 0x14; + return GET_APIC_VERSION(apic_read(APIC_LVR)); } /* - * 'what should we do if we get a hw irq event on an illegal vector'. - * each architecture has to answer this themselves. + * Check, if the APIC is integrated or a seperate chip */ -void ack_bad_irq(unsigned int irq) +static inline int lapic_is_integrated(void) { - printk("unexpected IRQ trap at vector %02x\n", irq); - /* - * Currently unexpected vectors happen only on SMP and APIC. - * We _must_ ack these because every local APIC has only N - * irq slots per priority level, and a 'hanging, unacked' IRQ - * holds up an irq slot - in excessive cases (when multiple - * unexpected vectors occur) that might lock up the APIC - * completely. - * But only ack when the APIC is enabled -AK - */ - if (cpu_has_apic) - ack_APIC_irq(); + return APIC_INTEGRATED(lapic_get_version()); } -void __init apic_intr_init(void) +/* + * Check, whether this is a modern or a first generation APIC + */ +static int modern_apic(void) { -#ifdef CONFIG_SMP - smp_intr_init(); -#endif - /* self generated IPI for local APIC timer */ - set_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); - - /* IPI vectors for APIC spurious and error interrupts */ - set_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); - set_intr_gate(ERROR_APIC_VECTOR, error_interrupt); - - /* thermal monitor LVT interrupt */ -#ifdef CONFIG_X86_MCE_P4THERMAL - set_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); -#endif + /* AMD systems use old APIC versions, so check the CPU */ + if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD && + boot_cpu_data.x86 >= 0xf) + return 1; + return lapic_get_version() >= 0x14; } -/* Using APIC to generate smp_local_timer_interrupt? */ -int using_apic_timer __read_mostly = 0; - -static int enabled_via_apicbase; - +/** + * enable_NMI_through_LVT0 - enable NMI through local vector table 0 + */ void enable_NMI_through_LVT0 (void * dummy) { - unsigned int v, ver; + unsigned int v = APIC_DM_NMI; - ver = apic_read(APIC_LVR); - ver = GET_APIC_VERSION(ver); - v = APIC_DM_NMI; /* unmask and set to NMI */ - if (!APIC_INTEGRATED(ver)) /* 82489DX */ + /* Level triggered for 82489DX */ + if (!lapic_is_integrated()) v |= APIC_LVT_LEVEL_TRIGGER; apic_write_around(APIC_LVT0, v); } +/** + * get_physical_broadcast - Get number of physical broadcast IDs + */ int get_physical_broadcast(void) { - if (modern_apic()) - return 0xff; - else - return 0xf; + return modern_apic() ? 0xff : 0xf; } -int get_maxlvt(void) +/** + * lapic_get_maxlvt - get the maximum number of local vector table entries + */ +int lapic_get_maxlvt(void) { - unsigned int v, ver, maxlvt; + unsigned int v = apic_read(APIC_LVR); - v = apic_read(APIC_LVR); - ver = GET_APIC_VERSION(v); /* 82489DXs do not report # of LVT entries. */ - maxlvt = APIC_INTEGRATED(ver) ? GET_APIC_MAXLVT(v) : 2; - return maxlvt; + return APIC_INTEGRATED(GET_APIC_VERSION(v)) ? GET_APIC_MAXLVT(v) : 2; } -void clear_local_APIC(void) +/* + * Local APIC timer + */ + +/* + * This part sets up the APIC 32 bit clock in LVTT1, with HZ interrupts + * per second. We assume that the caller has already set up the local + * APIC. + * + * The APIC timer is not exactly sync with the external timer chip, it + * closely follows bus clocks. + */ + +/* + * The timer chip is already set up at HZ interrupts per second here, + * but we do not accept timer interrupts yet. We only allow the BP + * to calibrate. + */ +static unsigned int __devinit get_8254_timer_count(void) { - int maxlvt; - unsigned long v; + unsigned long flags; - maxlvt = get_maxlvt(); + unsigned int count; - /* - * Masking an LVT entry can trigger a local APIC error - * if the vector is zero. Mask LVTERR first to prevent this. - */ - if (maxlvt >= 3) { - v = ERROR_APIC_VECTOR; /* any non-zero vector will do */ - apic_write_around(APIC_LVTERR, v | APIC_LVT_MASKED); - } - /* - * Careful: we have to set masks only first to deassert - * any level-triggered sources. - */ - v = apic_read(APIC_LVTT); - apic_write_around(APIC_LVTT, v | APIC_LVT_MASKED); - v = apic_read(APIC_LVT0); - apic_write_around(APIC_LVT0, v | APIC_LVT_MASKED); - v = apic_read(APIC_LVT1); - apic_write_around(APIC_LVT1, v | APIC_LVT_MASKED); - if (maxlvt >= 4) { - v = apic_read(APIC_LVTPC); - apic_write_around(APIC_LVTPC, v | APIC_LVT_MASKED); - } + spin_lock_irqsave(&i8253_lock, flags); -/* lets not touch this if we didn't frob it */ -#ifdef CONFIG_X86_MCE_P4THERMAL - if (maxlvt >= 5) { - v = apic_read(APIC_LVTTHMR); - apic_write_around(APIC_LVTTHMR, v | APIC_LVT_MASKED); - } -#endif - /* - * Clean APIC state for other OSs: - */ - apic_write_around(APIC_LVTT, APIC_LVT_MASKED); - apic_write_around(APIC_LVT0, APIC_LVT_MASKED); - apic_write_around(APIC_LVT1, APIC_LVT_MASKED); - if (maxlvt >= 3) - apic_write_around(APIC_LVTERR, APIC_LVT_MASKED); - if (maxlvt >= 4) - apic_write_around(APIC_LVTPC, APIC_LVT_MASKED); + outb_p(0x00, PIT_MODE); + count = inb_p(PIT_CH0); + count |= inb_p(PIT_CH0) << 8; -#ifdef CONFIG_X86_MCE_P4THERMAL - if (maxlvt >= 5) - apic_write_around(APIC_LVTTHMR, APIC_LVT_MASKED); -#endif - v = GET_APIC_VERSION(apic_read(APIC_LVR)); - if (APIC_INTEGRATED(v)) { /* !82489DX */ - if (maxlvt > 3) /* Due to Pentium errata 3AP and 11AP. */ - apic_write(APIC_ESR, 0); - apic_read(APIC_ESR); - } -} + spin_unlock_irqrestore(&i8253_lock, flags); -void __init connect_bsp_APIC(void) -{ - if (pic_mode) { - /* - * Do not trust the local APIC being empty at bootup. - */ - clear_local_APIC(); - /* - * PIC mode, enable APIC mode in the IMCR, i.e. - * connect BSP's local APIC to INT and NMI lines. - */ - apic_printk(APIC_VERBOSE, "leaving PIC mode, " - "enabling APIC mode.\n"); - outb(0x70, 0x22); - outb(0x01, 0x23); - } - enable_apic_mode(); + return count; } -void disconnect_bsp_APIC(int virt_wire_setup) +/* next tick in 8254 can be caught by catching timer wraparound */ +static void __devinit wait_8254_wraparound(void) { - if (pic_mode) { - /* - * Put the board back into PIC mode (has an effect - * only on certain older boards). Note that APIC - * interrupts, including IPIs, won't work beyond - * this point! The only exception are INIT IPIs. - */ - apic_printk(APIC_VERBOSE, "disabling APIC mode, " - "entering PIC mode.\n"); - outb(0x70, 0x22); - outb(0x00, 0x23); - } - else { - /* Go back to Virtual Wire compatibility mode */ - unsigned long value; + unsigned int curr_count, prev_count; - /* For the spurious interrupt use vector F, and enable it */ - value = apic_read(APIC_SPIV); - value &= ~APIC_VECTOR_MASK; - value |= APIC_SPIV_APIC_ENABLED; - value |= 0xf; - apic_write_around(APIC_SPIV, value); + curr_count = get_8254_timer_count(); + do { + prev_count = curr_count; + curr_count = get_8254_timer_count(); - if (!virt_wire_setup) { - /* For LVT0 make it edge triggered, active high, external and enabled */ - value = apic_read(APIC_LVT0); - value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING | - APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | - APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED ); - value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING; - value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT); - apic_write_around(APIC_LVT0, value); - } - else { - /* Disable LVT0 */ - apic_write_around(APIC_LVT0, APIC_LVT_MASKED); - } + /* workaround for broken Mercury/Neptune */ + if (prev_count >= curr_count + 0x100) + curr_count = get_8254_timer_count(); - /* For LVT1 make it edge triggered, active high, nmi and enabled */ - value = apic_read(APIC_LVT1); - value &= ~( - APIC_MODE_MASK | APIC_SEND_PENDING | - APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | - APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED); - value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING; - value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI); - apic_write_around(APIC_LVT1, value); - } + } while (prev_count >= curr_count); } -void disable_local_APIC(void) +/* + * Default initialization for 8254 timers. If we use other timers like HPET, + * we override this later + */ +void (*wait_timer_tick)(void) __devinitdata = wait_8254_wraparound; + +/* + * This function sets up the local APIC timer, with a timeout of + * 'clocks' APIC bus clock. During calibration we actually call + * this function twice on the boot CPU, once with a bogus timeout + * value, second time for real. The other (noncalibrating) CPUs + * call this function only once, with the real, calibrated value. + * + * We do reads before writes even if unnecessary, to get around the + * P5 APIC double write bug. + */ + +#define APIC_DIVISOR 16 + +static void __setup_APIC_LVTT(unsigned int clocks) { - unsigned long value; + unsigned int lvtt_value, tmp_value; + int cpu = smp_processor_id(); - clear_local_APIC(); + lvtt_value = APIC_LVT_TIMER_PERIODIC | LOCAL_TIMER_VECTOR; + if (!lapic_is_integrated()) + lvtt_value |= SET_APIC_TIMER_BASE(APIC_TIMER_BASE_DIV); + + if (cpu_isset(cpu, timer_bcast_ipi)) + lvtt_value |= APIC_LVT_MASKED; + + apic_write_around(APIC_LVTT, lvtt_value); /* - * Disable APIC (implies clearing of registers - * for 82489DX!). + * Divide PICLK by 16 */ - value = apic_read(APIC_SPIV); - value &= ~APIC_SPIV_APIC_ENABLED; - apic_write_around(APIC_SPIV, value); + tmp_value = apic_read(APIC_TDCR); + apic_write_around(APIC_TDCR, (tmp_value + & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE)) + | APIC_TDR_DIV_16); - if (enabled_via_apicbase) { - unsigned int l, h; - rdmsr(MSR_IA32_APICBASE, l, h); - l &= ~MSR_IA32_APICBASE_ENABLE; - wrmsr(MSR_IA32_APICBASE, l, h); - } + apic_write_around(APIC_TMICT, clocks/APIC_DIVISOR); } -/* - * This is to verify that we're looking at a real local APIC. - * Check these against your board if the CPUs aren't getting - * started for no apparent reason. - */ -int __init verify_local_APIC(void) +static void __devinit setup_APIC_timer(unsigned int clocks) { - unsigned int reg0, reg1; + unsigned long flags; + + local_irq_save(flags); /* - * The version register is read-only in a real APIC. + * Wait for IRQ0's slice: */ - reg0 = apic_read(APIC_LVR); - apic_printk(APIC_DEBUG, "Getting VERSION: %x\n", reg0); - apic_write(APIC_LVR, reg0 ^ APIC_LVR_MASK); - reg1 = apic_read(APIC_LVR); - apic_printk(APIC_DEBUG, "Getting VERSION: %x\n", reg1); + wait_timer_tick(); + + __setup_APIC_LVTT(clocks); + + local_irq_restore(flags); +} + +/* + * In this function we calibrate APIC bus clocks to the external + * timer. Unfortunately we cannot use jiffies and the timer irq + * to calibrate, since some later bootup code depends on getting + * the first irq? Ugh. + * + * We want to do the calibration only once since we + * want to have local timer irqs syncron. CPUs connected + * by the same APIC bus have the very same bus frequency. + * And we want to have irqs off anyways, no accidental + * APIC irq that way. + */ + +static int __init calibrate_APIC_clock(void) +{ + unsigned long long t1 = 0, t2 = 0; + long tt1, tt2; + long result; + int i; + const int LOOPS = HZ/10; + + apic_printk(APIC_VERBOSE, "calibrating APIC timer ...\n"); /* - * The two version reads above should print the same - * numbers. If the second one is different, then we - * poke at a non-APIC. + * Put whatever arbitrary (but long enough) timeout + * value into the APIC clock, we just want to get the + * counter running for calibration. */ - if (reg1 != reg0) - return 0; + __setup_APIC_LVTT(1000000000); /* - * Check if the version looks reasonably. + * The timer chip counts down to zero. Let's wait + * for a wraparound to start exact measurement: + * (the current tick might have been already half done) */ - reg1 = GET_APIC_VERSION(reg0); - if (reg1 == 0x00 || reg1 == 0xff) - return 0; - reg1 = get_maxlvt(); - if (reg1 < 0x02 || reg1 == 0xff) - return 0; + + wait_timer_tick(); /* - * The ID register is read/write in a real APIC. + * We wrapped around just now. Let's start: */ - reg0 = apic_read(APIC_ID); - apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg0); + if (cpu_has_tsc) + rdtscll(t1); + tt1 = apic_read(APIC_TMCCT); /* - * The next two are just to see if we have sane values. - * They're only really relevant if we're in Virtual Wire - * compatibility mode, but most boxes are anymore. + * Let's wait LOOPS wraprounds: */ - reg0 = apic_read(APIC_LVT0); - apic_printk(APIC_DEBUG, "Getting LVT0: %x\n", reg0); - reg1 = apic_read(APIC_LVT1); - apic_printk(APIC_DEBUG, "Getting LVT1: %x\n", reg1); + for (i = 0; i < LOOPS; i++) + wait_timer_tick(); - return 1; -} + tt2 = apic_read(APIC_TMCCT); + if (cpu_has_tsc) + rdtscll(t2); -void __init sync_Arb_IDs(void) -{ - /* Unsupported on P4 - see Intel Dev. Manual Vol. 3, Ch. 8.6.1 - And not needed on AMD */ - if (modern_apic()) - return; /* - * Wait for idle. + * The APIC bus clock counter is 32 bits only, it + * might have overflown, but note that we use signed + * longs, thus no extra care needed. + * + * underflown to be exact, as the timer counts down ;) */ - apic_wait_icr_idle(); - apic_printk(APIC_DEBUG, "Synchronizing Arb IDs.\n"); - apic_write_around(APIC_ICR, APIC_DEST_ALLINC | APIC_INT_LEVELTRIG - | APIC_DM_INIT); + result = (tt1-tt2)*APIC_DIVISOR/LOOPS; + + if (cpu_has_tsc) + apic_printk(APIC_VERBOSE, "..... CPU clock speed is " + "%ld.%04ld MHz.\n", + ((long)(t2-t1)/LOOPS)/(1000000/HZ), + ((long)(t2-t1)/LOOPS)%(1000000/HZ)); + + apic_printk(APIC_VERBOSE, "..... host bus clock speed is " + "%ld.%04ld MHz.\n", + result/(1000000/HZ), + result%(1000000/HZ)); + + return result; } -extern void __error_in_apic_c (void); +static unsigned int calibration_result; -/* - * An initial setup of the virtual wire mode. - */ -void __init init_bsp_APIC(void) +void __init setup_boot_APIC_clock(void) { - unsigned long value, ver; + unsigned long flags; + apic_printk(APIC_VERBOSE, "Using local APIC timer interrupts.\n"); + using_apic_timer = 1; + + local_irq_save(flags); + calibration_result = calibrate_APIC_clock(); /* - * Don't do the setup now if we have a SMP BIOS as the - * through-I/O-APIC virtual wire mode might be active. + * Now set up the timer for real. */ - if (smp_found_config || !cpu_has_apic) - return; + setup_APIC_timer(calibration_result); + + local_irq_restore(flags); +} - value = apic_read(APIC_LVR); - ver = GET_APIC_VERSION(value); +void __devinit setup_secondary_APIC_clock(void) +{ + setup_APIC_timer(calibration_result); +} - /* - * Do not trust the local APIC being empty at bootup. - */ - clear_local_APIC(); +void disable_APIC_timer(void) +{ + if (using_apic_timer) { + unsigned long v; - /* - * Enable APIC. - */ - value = apic_read(APIC_SPIV); - value &= ~APIC_VECTOR_MASK; - value |= APIC_SPIV_APIC_ENABLED; - - /* This bit is reserved on P4/Xeon and should be cleared */ - if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && (boot_cpu_data.x86 == 15)) - value &= ~APIC_SPIV_FOCUS_DISABLED; - else - value |= APIC_SPIV_FOCUS_DISABLED; - value |= SPURIOUS_APIC_VECTOR; - apic_write_around(APIC_SPIV, value); + v = apic_read(APIC_LVTT); + /* + * When an illegal vector value (0-15) is written to an LVT + * entry and delivery mode is Fixed, the APIC may signal an + * illegal vector error, with out regard to whether the mask + * bit is set or whether an interrupt is actually seen on + * input. + * + * Boot sequence might call this function when the LVTT has + * '0' vector value. So make sure vector field is set to + * valid value. + */ + v |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR); + apic_write_around(APIC_LVTT, v); + } +} - /* - * Set up the virtual wire mode. - */ - apic_write_around(APIC_LVT0, APIC_DM_EXTINT); - value = APIC_DM_NMI; - if (!APIC_INTEGRATED(ver)) /* 82489DX */ - value |= APIC_LVT_LEVEL_TRIGGER; - apic_write_around(APIC_LVT1, value); +void enable_APIC_timer(void) +{ + int cpu = smp_processor_id(); + + if (using_apic_timer && !cpu_isset(cpu, timer_bcast_ipi)) { + unsigned long v; + + v = apic_read(APIC_LVTT); + apic_write_around(APIC_LVTT, v & ~APIC_LVT_MASKED); + } } -void __devinit setup_local_APIC(void) +void switch_APIC_timer_to_ipi(void *cpumask) { - unsigned long oldvalue, value, ver, maxlvt; - int i, j; + cpumask_t mask = *(cpumask_t *)cpumask; + int cpu = smp_processor_id(); - /* Pound the ESR really hard over the head with a big hammer - mbligh */ - if (esr_disable) { - apic_write(APIC_ESR, 0); - apic_write(APIC_ESR, 0); - apic_write(APIC_ESR, 0); - apic_write(APIC_ESR, 0); + if (cpu_isset(cpu, mask) && + !cpu_isset(cpu, timer_bcast_ipi)) { + disable_APIC_timer(); + cpu_set(cpu, timer_bcast_ipi); } +} +EXPORT_SYMBOL(switch_APIC_timer_to_ipi); + +void switch_ipi_to_APIC_timer(void *cpumask) +{ + cpumask_t mask = *(cpumask_t *)cpumask; + int cpu = smp_processor_id(); - value = apic_read(APIC_LVR); - ver = GET_APIC_VERSION(value); + if (cpu_isset(cpu, mask) && + cpu_isset(cpu, timer_bcast_ipi)) { + cpu_clear(cpu, timer_bcast_ipi); + enable_APIC_timer(); + } +} +EXPORT_SYMBOL(switch_ipi_to_APIC_timer); - if ((SPURIOUS_APIC_VECTOR & 0x0f) != 0x0f) - __error_in_apic_c(); +/* + * Local timer interrupt handler. It does both profiling and + * process statistics/rescheduling. + */ +inline void smp_local_timer_interrupt(void) +{ + profile_tick(CPU_PROFILING); +#ifdef CONFIG_SMP + update_process_times(user_mode_vm(get_irq_regs())); +#endif /* - * Double-check whether this APIC is really registered. + * We take the 'long' return path, and there every subsystem + * grabs the apropriate locks (kernel lock/ irq lock). + * + * we might want to decouple profiling from the 'long path', + * and do the profiling totally in assembly. + * + * Currently this isn't too much of an issue (performance wise), + * we can take more than 100K local irqs per second on a 100 MHz P5. */ - if (!apic_id_registered()) - BUG(); +} + +/* + * Local APIC timer interrupt. This is the most natural way for doing + * local interrupts, but local timer interrupts can be emulated by + * broadcast interrupts too. [in case the hw doesn't support APIC timers] + * + * [ if a single-CPU system runs an SMP kernel then we call the local + * interrupt as well. Thus we cannot inline the local irq ... ] + */ + +fastcall void smp_apic_timer_interrupt(struct pt_regs *regs) +{ + struct pt_regs *old_regs = set_irq_regs(regs); + int cpu = smp_processor_id(); /* - * Intel recommends to set DFR, LDR and TPR before enabling - * an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel - * document number 292116). So here it goes... + * the NMI deadlock-detector uses this. */ - init_apic_ldr(); + per_cpu(irq_stat, cpu).apic_timer_irqs++; /* - * Set Task Priority to 'accept all'. We never change this - * later on. + * NOTE! We'd better ACK the irq immediately, + * because timer handling can be slow. */ - value = apic_read(APIC_TASKPRI); - value &= ~APIC_TPRI_MASK; - apic_write_around(APIC_TASKPRI, value); - + ack_APIC_irq(); /* - * After a crash, we no longer service the interrupts and a pending - * interrupt from previous kernel might still have ISR bit set. - * - * Most probably by now CPU has serviced that pending interrupt and - * it might not have done the ack_APIC_irq() because it thought, - * interrupt came from i8259 as ExtInt. LAPIC did not get EOI so it - * does not clear the ISR bit and cpu thinks it has already serivced - * the interrupt. Hence a vector might get locked. It was noticed - * for timer irq (vector 0x31). Issue an extra EOI to clear ISR. + * update_process_times() expects us to have done irq_enter(). + * Besides, if we don't timer interrupts ignore the global + * interrupt lock, which is the WrongThing (tm) to do. */ - for (i = APIC_ISR_NR - 1; i >= 0; i--) { - value = apic_read(APIC_ISR + i*0x10); - for (j = 31; j >= 0; j--) { - if (value & (1<= 3) { + v = ERROR_APIC_VECTOR; /* any non-zero vector will do */ + apic_write_around(APIC_LVTERR, v | APIC_LVT_MASKED); + } /* - * TODO: set up through-local-APIC from through-I/O-APIC? --macro + * Careful: we have to set masks only first to deassert + * any level-triggered sources. */ - value = apic_read(APIC_LVT0) & APIC_LVT_MASKED; - if (!smp_processor_id() && (pic_mode || !value)) { - value = APIC_DM_EXTINT; - apic_printk(APIC_VERBOSE, "enabled ExtINT on CPU#%d\n", - smp_processor_id()); - } else { - value = APIC_DM_EXTINT | APIC_LVT_MASKED; - apic_printk(APIC_VERBOSE, "masked ExtINT on CPU#%d\n", - smp_processor_id()); + v = apic_read(APIC_LVTT); + apic_write_around(APIC_LVTT, v | APIC_LVT_MASKED); + v = apic_read(APIC_LVT0); + apic_write_around(APIC_LVT0, v | APIC_LVT_MASKED); + v = apic_read(APIC_LVT1); + apic_write_around(APIC_LVT1, v | APIC_LVT_MASKED); + if (maxlvt >= 4) { + v = apic_read(APIC_LVTPC); + apic_write_around(APIC_LVTPC, v | APIC_LVT_MASKED); } - apic_write_around(APIC_LVT0, value); + /* lets not touch this if we didn't frob it */ +#ifdef CONFIG_X86_MCE_P4THERMAL + if (maxlvt >= 5) { + v = apic_read(APIC_LVTTHMR); + apic_write_around(APIC_LVTTHMR, v | APIC_LVT_MASKED); + } +#endif /* - * only the BP should see the LINT1 NMI signal, obviously. + * Clean APIC state for other OSs: */ - if (!smp_processor_id()) - value = APIC_DM_NMI; - else - value = APIC_DM_NMI | APIC_LVT_MASKED; - if (!APIC_INTEGRATED(ver)) /* 82489DX */ - value |= APIC_LVT_LEVEL_TRIGGER; - apic_write_around(APIC_LVT1, value); - - if (APIC_INTEGRATED(ver) && !esr_disable) { /* !82489DX */ - maxlvt = get_maxlvt(); - if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */ - apic_write(APIC_ESR, 0); - oldvalue = apic_read(APIC_ESR); + apic_write_around(APIC_LVTT, APIC_LVT_MASKED); + apic_write_around(APIC_LVT0, APIC_LVT_MASKED); + apic_write_around(APIC_LVT1, APIC_LVT_MASKED); + if (maxlvt >= 3) + apic_write_around(APIC_LVTERR, APIC_LVT_MASKED); + if (maxlvt >= 4) + apic_write_around(APIC_LVTPC, APIC_LVT_MASKED); - value = ERROR_APIC_VECTOR; // enables sending errors - apic_write_around(APIC_LVTERR, value); - /* - * spec says clear errors after enabling vector. - */ +#ifdef CONFIG_X86_MCE_P4THERMAL + if (maxlvt >= 5) + apic_write_around(APIC_LVTTHMR, APIC_LVT_MASKED); +#endif + /* Integrated APIC (!82489DX) ? */ + if (lapic_is_integrated()) { if (maxlvt > 3) + /* Clear ESR due to Pentium errata 3AP and 11AP */ apic_write(APIC_ESR, 0); - value = apic_read(APIC_ESR); - if (value != oldvalue) - apic_printk(APIC_VERBOSE, "ESR value before enabling " - "vector: 0x%08lx after: 0x%08lx\n", - oldvalue, value); - } else { - if (esr_disable) - /* - * Something untraceble is creating bad interrupts on - * secondary quads ... for the moment, just leave the - * ESR disabled - we can't do anything useful with the - * errors anyway - mbligh - */ - printk("Leaving ESR disabled.\n"); - else - printk("No ESR for 82489DX.\n"); + apic_read(APIC_ESR); } +} - setup_apic_nmi_watchdog(NULL); - apic_pm_activate(); +/** + * disable_local_APIC - clear and disable the local APIC + */ +void disable_local_APIC(void) +{ + unsigned long value; + + clear_local_APIC(); + + /* + * Disable APIC (implies clearing of registers + * for 82489DX!). + */ + value = apic_read(APIC_SPIV); + value &= ~APIC_SPIV_APIC_ENABLED; + apic_write_around(APIC_SPIV, value); + + /* + * When LAPIC was disabled by the BIOS and enabled by the kernel, + * restore the disabled state. + */ + if (enabled_via_apicbase) { + unsigned int l, h; + + rdmsr(MSR_IA32_APICBASE, l, h); + l &= ~MSR_IA32_APICBASE_ENABLE; + wrmsr(MSR_IA32_APICBASE, l, h); + } } /* - * If Linux enabled the LAPIC against the BIOS default - * disable it down before re-entering the BIOS on shutdown. - * Otherwise the BIOS may get confused and not power-off. - * Additionally clear all LVT entries before disable_local_APIC + * If Linux enabled the LAPIC against the BIOS default disable it down before + * re-entering the BIOS on shutdown. Otherwise the BIOS may get confused and + * not power-off. Additionally clear all LVT entries before disable_local_APIC * for the case where Linux didn't enable the LAPIC. */ void lapic_shutdown(void) @@ -625,168 +631,296 @@ void lapic_shutdown(void) local_irq_restore(flags); } -#ifdef CONFIG_PM - -static struct { - int active; - /* r/w apic fields */ - unsigned int apic_id; - unsigned int apic_taskpri; - unsigned int apic_ldr; - unsigned int apic_dfr; - unsigned int apic_spiv; - unsigned int apic_lvtt; - unsigned int apic_lvtpc; - unsigned int apic_lvt0; - unsigned int apic_lvt1; - unsigned int apic_lvterr; - unsigned int apic_tmict; - unsigned int apic_tdcr; - unsigned int apic_thmr; -} apic_pm_state; - -static int lapic_suspend(struct sys_device *dev, pm_message_t state) +/* + * This is to verify that we're looking at a real local APIC. + * Check these against your board if the CPUs aren't getting + * started for no apparent reason. + */ +int __init verify_local_APIC(void) { - unsigned long flags; - int maxlvt; + unsigned int reg0, reg1; - if (!apic_pm_state.active) + /* + * The version register is read-only in a real APIC. + */ + reg0 = apic_read(APIC_LVR); + apic_printk(APIC_DEBUG, "Getting VERSION: %x\n", reg0); + apic_write(APIC_LVR, reg0 ^ APIC_LVR_MASK); + reg1 = apic_read(APIC_LVR); + apic_printk(APIC_DEBUG, "Getting VERSION: %x\n", reg1); + + /* + * The two version reads above should print the same + * numbers. If the second one is different, then we + * poke at a non-APIC. + */ + if (reg1 != reg0) return 0; - maxlvt = get_maxlvt(); + /* + * Check if the version looks reasonably. + */ + reg1 = GET_APIC_VERSION(reg0); + if (reg1 == 0x00 || reg1 == 0xff) + return 0; + reg1 = lapic_get_maxlvt(); + if (reg1 < 0x02 || reg1 == 0xff) + return 0; - apic_pm_state.apic_id = apic_read(APIC_ID); - apic_pm_state.apic_taskpri = apic_read(APIC_TASKPRI); - apic_pm_state.apic_ldr = apic_read(APIC_LDR); - apic_pm_state.apic_dfr = apic_read(APIC_DFR); - apic_pm_state.apic_spiv = apic_read(APIC_SPIV); - apic_pm_state.apic_lvtt = apic_read(APIC_LVTT); - if (maxlvt >= 4) - apic_pm_state.apic_lvtpc = apic_read(APIC_LVTPC); - apic_pm_state.apic_lvt0 = apic_read(APIC_LVT0); - apic_pm_state.apic_lvt1 = apic_read(APIC_LVT1); - apic_pm_state.apic_lvterr = apic_read(APIC_LVTERR); - apic_pm_state.apic_tmict = apic_read(APIC_TMICT); - apic_pm_state.apic_tdcr = apic_read(APIC_TDCR); -#ifdef CONFIG_X86_MCE_P4THERMAL - if (maxlvt >= 5) - apic_pm_state.apic_thmr = apic_read(APIC_LVTTHMR); -#endif - - local_irq_save(flags); - disable_local_APIC(); - local_irq_restore(flags); - return 0; + /* + * The ID register is read/write in a real APIC. + */ + reg0 = apic_read(APIC_ID); + apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg0); + + /* + * The next two are just to see if we have sane values. + * They're only really relevant if we're in Virtual Wire + * compatibility mode, but most boxes are anymore. + */ + reg0 = apic_read(APIC_LVT0); + apic_printk(APIC_DEBUG, "Getting LVT0: %x\n", reg0); + reg1 = apic_read(APIC_LVT1); + apic_printk(APIC_DEBUG, "Getting LVT1: %x\n", reg1); + + return 1; } -static int lapic_resume(struct sys_device *dev) +/** + * sync_Arb_IDs - synchronize APIC bus arbitration IDs + */ +void __init sync_Arb_IDs(void) { - unsigned int l, h; - unsigned long flags; - int maxlvt; + /* + * Unsupported on P4 - see Intel Dev. Manual Vol. 3, Ch. 8.6.1 And not + * needed on AMD. + */ + if (modern_apic()) + return; + /* + * Wait for idle. + */ + apic_wait_icr_idle(); - if (!apic_pm_state.active) - return 0; + apic_printk(APIC_DEBUG, "Synchronizing Arb IDs.\n"); + apic_write_around(APIC_ICR, APIC_DEST_ALLINC | APIC_INT_LEVELTRIG + | APIC_DM_INIT); +} - maxlvt = get_maxlvt(); +/* + * An initial setup of the virtual wire mode. + */ +void __init init_bsp_APIC(void) +{ + unsigned long value; - local_irq_save(flags); + /* + * Don't do the setup now if we have a SMP BIOS as the + * through-I/O-APIC virtual wire mode might be active. + */ + if (smp_found_config || !cpu_has_apic) + return; /* - * Make sure the APICBASE points to the right address - * - * FIXME! This will be wrong if we ever support suspend on - * SMP! We'll need to do this as part of the CPU restore! + * Do not trust the local APIC being empty at bootup. */ - rdmsr(MSR_IA32_APICBASE, l, h); - l &= ~MSR_IA32_APICBASE_BASE; - l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr; - wrmsr(MSR_IA32_APICBASE, l, h); + clear_local_APIC(); - apic_write(APIC_LVTERR, ERROR_APIC_VECTOR | APIC_LVT_MASKED); - apic_write(APIC_ID, apic_pm_state.apic_id); - apic_write(APIC_DFR, apic_pm_state.apic_dfr); - apic_write(APIC_LDR, apic_pm_state.apic_ldr); - apic_write(APIC_TASKPRI, apic_pm_state.apic_taskpri); - apic_write(APIC_SPIV, apic_pm_state.apic_spiv); - apic_write(APIC_LVT0, apic_pm_state.apic_lvt0); - apic_write(APIC_LVT1, apic_pm_state.apic_lvt1); -#ifdef CONFIG_X86_MCE_P4THERMAL - if (maxlvt >= 5) - apic_write(APIC_LVTTHMR, apic_pm_state.apic_thmr); -#endif - if (maxlvt >= 4) - apic_write(APIC_LVTPC, apic_pm_state.apic_lvtpc); - apic_write(APIC_LVTT, apic_pm_state.apic_lvtt); - apic_write(APIC_TDCR, apic_pm_state.apic_tdcr); - apic_write(APIC_TMICT, apic_pm_state.apic_tmict); - apic_write(APIC_ESR, 0); - apic_read(APIC_ESR); - apic_write(APIC_LVTERR, apic_pm_state.apic_lvterr); - apic_write(APIC_ESR, 0); - apic_read(APIC_ESR); - local_irq_restore(flags); - return 0; + /* + * Enable APIC. + */ + value = apic_read(APIC_SPIV); + value &= ~APIC_VECTOR_MASK; + value |= APIC_SPIV_APIC_ENABLED; + + /* This bit is reserved on P4/Xeon and should be cleared */ + if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && + (boot_cpu_data.x86 == 15)) + value &= ~APIC_SPIV_FOCUS_DISABLED; + else + value |= APIC_SPIV_FOCUS_DISABLED; + value |= SPURIOUS_APIC_VECTOR; + apic_write_around(APIC_SPIV, value); + + /* + * Set up the virtual wire mode. + */ + apic_write_around(APIC_LVT0, APIC_DM_EXTINT); + value = APIC_DM_NMI; + if (!lapic_is_integrated()) /* 82489DX */ + value |= APIC_LVT_LEVEL_TRIGGER; + apic_write_around(APIC_LVT1, value); } -/* - * This device has no shutdown method - fully functioning local APICs - * are needed on every CPU up until machine_halt/restart/poweroff. +/** + * setup_local_APIC - setup the local APIC */ +void __devinit setup_local_APIC(void) +{ + unsigned long oldvalue, value, maxlvt, integrated; + int i, j; -static struct sysdev_class lapic_sysclass = { - set_kset_name("lapic"), - .resume = lapic_resume, - .suspend = lapic_suspend, -}; + /* Pound the ESR really hard over the head with a big hammer - mbligh */ + if (esr_disable) { + apic_write(APIC_ESR, 0); + apic_write(APIC_ESR, 0); + apic_write(APIC_ESR, 0); + apic_write(APIC_ESR, 0); + } -static struct sys_device device_lapic = { - .id = 0, - .cls = &lapic_sysclass, -}; + integrated = lapic_is_integrated(); -static void __devinit apic_pm_activate(void) -{ - apic_pm_state.active = 1; -} + /* + * Double-check whether this APIC is really registered. + */ + if (!apic_id_registered()) + BUG(); -static int __init init_lapic_sysfs(void) -{ - int error; + /* + * Intel recommends to set DFR, LDR and TPR before enabling + * an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel + * document number 292116). So here it goes... + */ + init_apic_ldr(); - if (!cpu_has_apic) - return 0; - /* XXX: remove suspend/resume procs if !apic_pm_state.active? */ + /* + * Set Task Priority to 'accept all'. We never change this + * later on. + */ + value = apic_read(APIC_TASKPRI); + value &= ~APIC_TPRI_MASK; + apic_write_around(APIC_TASKPRI, value); - error = sysdev_class_register(&lapic_sysclass); - if (!error) - error = sysdev_register(&device_lapic); - return error; -} -device_initcall(init_lapic_sysfs); + /* + * After a crash, we no longer service the interrupts and a pending + * interrupt from previous kernel might still have ISR bit set. + * + * Most probably by now CPU has serviced that pending interrupt and + * it might not have done the ack_APIC_irq() because it thought, + * interrupt came from i8259 as ExtInt. LAPIC did not get EOI so it + * does not clear the ISR bit and cpu thinks it has already serivced + * the interrupt. Hence a vector might get locked. It was noticed + * for timer irq (vector 0x31). Issue an extra EOI to clear ISR. + */ + for (i = APIC_ISR_NR - 1; i >= 0; i--) { + value = apic_read(APIC_ISR + i*0x10); + for (j = 31; j >= 0; j--) { + if (value & (1< 3) /* Due to the Pentium erratum 3AP. */ + apic_write(APIC_ESR, 0); + oldvalue = apic_read(APIC_ESR); + + /* enables sending errors */ + value = ERROR_APIC_VECTOR; + apic_write_around(APIC_LVTERR, value); + /* + * spec says clear errors after enabling vector. + */ + if (maxlvt > 3) + apic_write(APIC_ESR, 0); + value = apic_read(APIC_ESR); + if (value != oldvalue) + apic_printk(APIC_VERBOSE, "ESR value before enabling " + "vector: 0x%08lx after: 0x%08lx\n", + oldvalue, value); + } else { + if (esr_disable) + /* + * Something untraceble is creating bad interrupts on + * secondary quads ... for the moment, just leave the + * ESR disabled - we can't do anything useful with the + * errors anyway - mbligh + */ + printk(KERN_INFO "Leaving ESR disabled.\n"); + else + printk(KERN_INFO "No ESR for 82489DX.\n"); + } -static int __init apic_set_verbosity(char *str) -{ - if (strcmp("debug", str) == 0) - apic_verbosity = APIC_DEBUG; - else if (strcmp("verbose", str) == 0) - apic_verbosity = APIC_VERBOSE; - return 1; + setup_apic_nmi_watchdog(NULL); + apic_pm_activate(); } -__setup("apic=", apic_set_verbosity); - +/* + * Detect and initialize APIC + */ static int __init detect_init_APIC (void) { u32 h, l, features; @@ -798,7 +932,7 @@ static int __init detect_init_APIC (void) switch (boot_cpu_data.x86_vendor) { case X86_VENDOR_AMD: if ((boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model > 1) || - (boot_cpu_data.x86 == 15)) + (boot_cpu_data.x86 == 15)) break; goto no_apic; case X86_VENDOR_INTEL: @@ -812,23 +946,23 @@ static int __init detect_init_APIC (void) if (!cpu_has_apic) { /* - * Over-ride BIOS and try to enable the local - * APIC only if "lapic" specified. + * Over-ride BIOS and try to enable the local APIC only if + * "lapic" specified. */ if (enable_local_apic <= 0) { - printk("Local APIC disabled by BIOS -- " + printk(KERN_INFO "Local APIC disabled by BIOS -- " "you can enable it with \"lapic\"\n"); return -1; } /* - * Some BIOSes disable the local APIC in the - * APIC_BASE MSR. This can only be done in - * software for Intel P6 or later and AMD K7 - * (Model > 1) or later. + * Some BIOSes disable the local APIC in the APIC_BASE + * MSR. This can only be done in software for Intel P6 or later + * and AMD K7 (Model > 1) or later. */ rdmsr(MSR_IA32_APICBASE, l, h); if (!(l & MSR_IA32_APICBASE_ENABLE)) { - printk("Local APIC disabled by BIOS -- reenabling.\n"); + printk(KERN_INFO + "Local APIC disabled by BIOS -- reenabling.\n"); l &= ~MSR_IA32_APICBASE_BASE; l |= MSR_IA32_APICBASE_ENABLE | APIC_DEFAULT_PHYS_BASE; wrmsr(MSR_IA32_APICBASE, l, h); @@ -841,7 +975,7 @@ static int __init detect_init_APIC (void) */ features = cpuid_edx(1); if (!(features & (1 << X86_FEATURE_APIC))) { - printk("Could not enable APIC!\n"); + printk(KERN_WARNING "Could not enable APIC!\n"); return -1; } set_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability); @@ -849,457 +983,167 @@ static int __init detect_init_APIC (void) /* The BIOS may have set up the APIC at some other address */ rdmsr(MSR_IA32_APICBASE, l, h); - if (l & MSR_IA32_APICBASE_ENABLE) - mp_lapic_addr = l & MSR_IA32_APICBASE_BASE; - - if (nmi_watchdog != NMI_NONE) - nmi_watchdog = NMI_LOCAL_APIC; - - printk("Found and enabled local APIC!\n"); - - apic_pm_activate(); - - return 0; - -no_apic: - printk("No local APIC present or hardware disabled\n"); - return -1; -} - -void __init init_apic_mappings(void) -{ - unsigned long apic_phys; - - /* - * If no local APIC can be found then set up a fake all - * zeroes page to simulate the local APIC and another - * one for the IO-APIC. - */ - if (!smp_found_config && detect_init_APIC()) { - apic_phys = (unsigned long) alloc_bootmem_pages(PAGE_SIZE); - apic_phys = __pa(apic_phys); - } else - apic_phys = mp_lapic_addr; - - set_fixmap_nocache(FIX_APIC_BASE, apic_phys); - printk(KERN_DEBUG "mapped APIC to %08lx (%08lx)\n", APIC_BASE, - apic_phys); - - /* - * Fetch the APIC ID of the BSP in case we have a - * default configuration (or the MP table is broken). - */ - if (boot_cpu_physical_apicid == -1U) - boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID)); - -#ifdef CONFIG_X86_IO_APIC - { - unsigned long ioapic_phys, idx = FIX_IO_APIC_BASE_0; - int i; - - for (i = 0; i < nr_ioapics; i++) { - if (smp_found_config) { - ioapic_phys = mp_ioapics[i].mpc_apicaddr; - if (!ioapic_phys) { - printk(KERN_ERR - "WARNING: bogus zero IO-APIC " - "address found in MPTABLE, " - "disabling IO/APIC support!\n"); - smp_found_config = 0; - skip_ioapic_setup = 1; - goto fake_ioapic_page; - } - } else { -fake_ioapic_page: - ioapic_phys = (unsigned long) - alloc_bootmem_pages(PAGE_SIZE); - ioapic_phys = __pa(ioapic_phys); - } - set_fixmap_nocache(idx, ioapic_phys); - printk(KERN_DEBUG "mapped IOAPIC to %08lx (%08lx)\n", - __fix_to_virt(idx), ioapic_phys); - idx++; - } - } -#endif -} - -/* - * This part sets up the APIC 32 bit clock in LVTT1, with HZ interrupts - * per second. We assume that the caller has already set up the local - * APIC. - * - * The APIC timer is not exactly sync with the external timer chip, it - * closely follows bus clocks. - */ - -/* - * The timer chip is already set up at HZ interrupts per second here, - * but we do not accept timer interrupts yet. We only allow the BP - * to calibrate. - */ -static unsigned int __devinit get_8254_timer_count(void) -{ - unsigned long flags; - - unsigned int count; - - spin_lock_irqsave(&i8253_lock, flags); - - outb_p(0x00, PIT_MODE); - count = inb_p(PIT_CH0); - count |= inb_p(PIT_CH0) << 8; - - spin_unlock_irqrestore(&i8253_lock, flags); - - return count; -} - -/* next tick in 8254 can be caught by catching timer wraparound */ -static void __devinit wait_8254_wraparound(void) -{ - unsigned int curr_count, prev_count; - - curr_count = get_8254_timer_count(); - do { - prev_count = curr_count; - curr_count = get_8254_timer_count(); - - /* workaround for broken Mercury/Neptune */ - if (prev_count >= curr_count + 0x100) - curr_count = get_8254_timer_count(); - - } while (prev_count >= curr_count); -} - -/* - * Default initialization for 8254 timers. If we use other timers like HPET, - * we override this later - */ -void (*wait_timer_tick)(void) __devinitdata = wait_8254_wraparound; - -/* - * This function sets up the local APIC timer, with a timeout of - * 'clocks' APIC bus clock. During calibration we actually call - * this function twice on the boot CPU, once with a bogus timeout - * value, second time for real. The other (noncalibrating) CPUs - * call this function only once, with the real, calibrated value. - * - * We do reads before writes even if unnecessary, to get around the - * P5 APIC double write bug. - */ - -#define APIC_DIVISOR 16 - -static void __setup_APIC_LVTT(unsigned int clocks) -{ - unsigned int lvtt_value, tmp_value, ver; - int cpu = smp_processor_id(); - - ver = GET_APIC_VERSION(apic_read(APIC_LVR)); - lvtt_value = APIC_LVT_TIMER_PERIODIC | LOCAL_TIMER_VECTOR; - if (!APIC_INTEGRATED(ver)) - lvtt_value |= SET_APIC_TIMER_BASE(APIC_TIMER_BASE_DIV); - - if (cpu_isset(cpu, timer_bcast_ipi)) - lvtt_value |= APIC_LVT_MASKED; - - apic_write_around(APIC_LVTT, lvtt_value); - - /* - * Divide PICLK by 16 - */ - tmp_value = apic_read(APIC_TDCR); - apic_write_around(APIC_TDCR, (tmp_value - & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE)) - | APIC_TDR_DIV_16); - - apic_write_around(APIC_TMICT, clocks/APIC_DIVISOR); -} - -static void __devinit setup_APIC_timer(unsigned int clocks) -{ - unsigned long flags; - - local_irq_save(flags); - - /* - * Wait for IRQ0's slice: - */ - wait_timer_tick(); - - __setup_APIC_LVTT(clocks); - - local_irq_restore(flags); -} - -/* - * In this function we calibrate APIC bus clocks to the external - * timer. Unfortunately we cannot use jiffies and the timer irq - * to calibrate, since some later bootup code depends on getting - * the first irq? Ugh. - * - * We want to do the calibration only once since we - * want to have local timer irqs syncron. CPUs connected - * by the same APIC bus have the very same bus frequency. - * And we want to have irqs off anyways, no accidental - * APIC irq that way. - */ - -static int __init calibrate_APIC_clock(void) -{ - unsigned long long t1 = 0, t2 = 0; - long tt1, tt2; - long result; - int i; - const int LOOPS = HZ/10; - - apic_printk(APIC_VERBOSE, "calibrating APIC timer ...\n"); - - /* - * Put whatever arbitrary (but long enough) timeout - * value into the APIC clock, we just want to get the - * counter running for calibration. - */ - __setup_APIC_LVTT(1000000000); - - /* - * The timer chip counts down to zero. Let's wait - * for a wraparound to start exact measurement: - * (the current tick might have been already half done) - */ - - wait_timer_tick(); - - /* - * We wrapped around just now. Let's start: - */ - if (cpu_has_tsc) - rdtscll(t1); - tt1 = apic_read(APIC_TMCCT); - - /* - * Let's wait LOOPS wraprounds: - */ - for (i = 0; i < LOOPS; i++) - wait_timer_tick(); - - tt2 = apic_read(APIC_TMCCT); - if (cpu_has_tsc) - rdtscll(t2); - - /* - * The APIC bus clock counter is 32 bits only, it - * might have overflown, but note that we use signed - * longs, thus no extra care needed. - * - * underflown to be exact, as the timer counts down ;) - */ + if (l & MSR_IA32_APICBASE_ENABLE) + mp_lapic_addr = l & MSR_IA32_APICBASE_BASE; - result = (tt1-tt2)*APIC_DIVISOR/LOOPS; + if (nmi_watchdog != NMI_NONE) + nmi_watchdog = NMI_LOCAL_APIC; - if (cpu_has_tsc) - apic_printk(APIC_VERBOSE, "..... CPU clock speed is " - "%ld.%04ld MHz.\n", - ((long)(t2-t1)/LOOPS)/(1000000/HZ), - ((long)(t2-t1)/LOOPS)%(1000000/HZ)); + printk(KERN_INFO "Found and enabled local APIC!\n"); - apic_printk(APIC_VERBOSE, "..... host bus clock speed is " - "%ld.%04ld MHz.\n", - result/(1000000/HZ), - result%(1000000/HZ)); + apic_pm_activate(); - return result; -} + return 0; -static unsigned int calibration_result; +no_apic: + printk(KERN_INFO "No local APIC present or hardware disabled\n"); + return -1; +} -void __init setup_boot_APIC_clock(void) +/** + * init_apic_mappings - initialize APIC mappings + */ +void __init init_apic_mappings(void) { - unsigned long flags; - apic_printk(APIC_VERBOSE, "Using local APIC timer interrupts.\n"); - using_apic_timer = 1; - - local_irq_save(flags); + unsigned long apic_phys; - calibration_result = calibrate_APIC_clock(); /* - * Now set up the timer for real. + * If no local APIC can be found then set up a fake all + * zeroes page to simulate the local APIC and another + * one for the IO-APIC. */ - setup_APIC_timer(calibration_result); + if (!smp_found_config && detect_init_APIC()) { + apic_phys = (unsigned long) alloc_bootmem_pages(PAGE_SIZE); + apic_phys = __pa(apic_phys); + } else + apic_phys = mp_lapic_addr; - local_irq_restore(flags); -} + set_fixmap_nocache(FIX_APIC_BASE, apic_phys); + printk(KERN_DEBUG "mapped APIC to %08lx (%08lx)\n", APIC_BASE, + apic_phys); -void __devinit setup_secondary_APIC_clock(void) -{ - setup_APIC_timer(calibration_result); -} + /* + * Fetch the APIC ID of the BSP in case we have a + * default configuration (or the MP table is broken). + */ + if (boot_cpu_physical_apicid == -1U) + boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID)); -void disable_APIC_timer(void) -{ - if (using_apic_timer) { - unsigned long v; +#ifdef CONFIG_X86_IO_APIC + { + unsigned long ioapic_phys, idx = FIX_IO_APIC_BASE_0; + int i; - v = apic_read(APIC_LVTT); - /* - * When an illegal vector value (0-15) is written to an LVT - * entry and delivery mode is Fixed, the APIC may signal an - * illegal vector error, with out regard to whether the mask - * bit is set or whether an interrupt is actually seen on input. - * - * Boot sequence might call this function when the LVTT has - * '0' vector value. So make sure vector field is set to - * valid value. - */ - v |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR); - apic_write_around(APIC_LVTT, v); + for (i = 0; i < nr_ioapics; i++) { + if (smp_found_config) { + ioapic_phys = mp_ioapics[i].mpc_apicaddr; + if (!ioapic_phys) { + printk(KERN_ERR + "WARNING: bogus zero IO-APIC " + "address found in MPTABLE, " + "disabling IO/APIC support!\n"); + smp_found_config = 0; + skip_ioapic_setup = 1; + goto fake_ioapic_page; + } + } else { +fake_ioapic_page: + ioapic_phys = (unsigned long) + alloc_bootmem_pages(PAGE_SIZE); + ioapic_phys = __pa(ioapic_phys); + } + set_fixmap_nocache(idx, ioapic_phys); + printk(KERN_DEBUG "mapped IOAPIC to %08lx (%08lx)\n", + __fix_to_virt(idx), ioapic_phys); + idx++; + } } +#endif } -void enable_APIC_timer(void) +/* + * This initializes the IO-APIC and APIC hardware if this is + * a UP kernel. + */ +int __init APIC_init_uniprocessor (void) { - int cpu = smp_processor_id(); - - if (using_apic_timer && - !cpu_isset(cpu, timer_bcast_ipi)) { - unsigned long v; - - v = apic_read(APIC_LVTT); - apic_write_around(APIC_LVTT, v & ~APIC_LVT_MASKED); - } -} + if (enable_local_apic < 0) + clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability); -void switch_APIC_timer_to_ipi(void *cpumask) -{ - cpumask_t mask = *(cpumask_t *)cpumask; - int cpu = smp_processor_id(); + if (!smp_found_config && !cpu_has_apic) + return -1; - if (cpu_isset(cpu, mask) && - !cpu_isset(cpu, timer_bcast_ipi)) { - disable_APIC_timer(); - cpu_set(cpu, timer_bcast_ipi); + /* + * Complain if the BIOS pretends there is one. + */ + if (!cpu_has_apic && + APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) { + printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n", + boot_cpu_physical_apicid); + clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability); + return -1; } -} -EXPORT_SYMBOL(switch_APIC_timer_to_ipi); -void switch_ipi_to_APIC_timer(void *cpumask) -{ - cpumask_t mask = *(cpumask_t *)cpumask; - int cpu = smp_processor_id(); + verify_local_APIC(); - if (cpu_isset(cpu, mask) && - cpu_isset(cpu, timer_bcast_ipi)) { - cpu_clear(cpu, timer_bcast_ipi); - enable_APIC_timer(); - } -} -EXPORT_SYMBOL(switch_ipi_to_APIC_timer); + connect_bsp_APIC(); -#undef APIC_DIVISOR + /* + * Hack: In case of kdump, after a crash, kernel might be booting + * on a cpu with non-zero lapic id. But boot_cpu_physical_apicid + * might be zero if read from MP tables. Get it from LAPIC. + */ +#ifdef CONFIG_CRASH_DUMP + boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID)); +#endif + phys_cpu_present_map = physid_mask_of_physid(boot_cpu_physical_apicid); -/* - * Local timer interrupt handler. It does both profiling and - * process statistics/rescheduling. - * - * We do profiling in every local tick, statistics/rescheduling - * happen only every 'profiling multiplier' ticks. The default - * multiplier is 1 and it can be changed by writing the new multiplier - * value into /proc/profile. - */ + setup_local_APIC(); -inline void smp_local_timer_interrupt(void) -{ - profile_tick(CPU_PROFILING); -#ifdef CONFIG_SMP - update_process_times(user_mode_vm(get_irq_regs())); +#ifdef CONFIG_X86_IO_APIC + if (smp_found_config) + if (!skip_ioapic_setup && nr_ioapics) + setup_IO_APIC(); #endif + setup_boot_clock(); - /* - * We take the 'long' return path, and there every subsystem - * grabs the apropriate locks (kernel lock/ irq lock). - * - * we might want to decouple profiling from the 'long path', - * and do the profiling totally in assembly. - * - * Currently this isn't too much of an issue (performance wise), - * we can take more than 100K local irqs per second on a 100 MHz P5. - */ + return 0; } /* - * Local APIC timer interrupt. This is the most natural way for doing - * local interrupts, but local timer interrupts can be emulated by - * broadcast interrupts too. [in case the hw doesn't support APIC timers] - * - * [ if a single-CPU system runs an SMP kernel then we call the local - * interrupt as well. Thus we cannot inline the local irq ... ] + * APIC command line parameters */ - -fastcall void smp_apic_timer_interrupt(struct pt_regs *regs) -{ - struct pt_regs *old_regs = set_irq_regs(regs); - int cpu = smp_processor_id(); - - /* - * the NMI deadlock-detector uses this. - */ - per_cpu(irq_stat, cpu).apic_timer_irqs++; - - /* - * NOTE! We'd better ACK the irq immediately, - * because timer handling can be slow. - */ - ack_APIC_irq(); - /* - * update_process_times() expects us to have done irq_enter(). - * Besides, if we don't timer interrupts ignore the global - * interrupt lock, which is the WrongThing (tm) to do. - */ - exit_idle(); - irq_enter(); - smp_local_timer_interrupt(); - irq_exit(); - set_irq_regs(old_regs); -} - -#ifndef CONFIG_SMP -static void up_apic_timer_interrupt_call(void) +static int __init parse_lapic(char *arg) { - int cpu = smp_processor_id(); - - /* - * the NMI deadlock-detector uses this. - */ - per_cpu(irq_stat, cpu).apic_timer_irqs++; - - smp_local_timer_interrupt(); + enable_local_apic = 1; + return 0; } -#endif +early_param("lapic", parse_lapic); -void smp_send_timer_broadcast_ipi(void) +static int __init parse_nolapic(char *arg) { - cpumask_t mask; - - cpus_and(mask, cpu_online_map, timer_bcast_ipi); - if (!cpus_empty(mask)) { -#ifdef CONFIG_SMP - send_IPI_mask(mask, LOCAL_TIMER_VECTOR); -#else - /* - * We can directly call the apic timer interrupt handler - * in UP case. Minus all irq related functions - */ - up_apic_timer_interrupt_call(); -#endif - } + enable_local_apic = -1; + clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability); + return 0; } +early_param("nolapic", parse_nolapic); -int setup_profiling_timer(unsigned int multiplier) +static int __init apic_set_verbosity(char *str) { - return -EINVAL; + if (strcmp("debug", str) == 0) + apic_verbosity = APIC_DEBUG; + else if (strcmp("verbose", str) == 0) + apic_verbosity = APIC_VERBOSE; + return 1; } +__setup("apic=", apic_set_verbosity); + + +/* + * Local APIC interrupts + */ + /* * This interrupt should _never_ happen with our APIC/SMP architecture */ @@ -1319,15 +1163,14 @@ fastcall void smp_spurious_interrupt(struct pt_regs *regs) ack_APIC_irq(); /* see sw-dev-man vol 3, chapter 7.4.13.5 */ - printk(KERN_INFO "spurious APIC interrupt on CPU#%d, should never happen.\n", - smp_processor_id()); + printk(KERN_INFO "spurious APIC interrupt on CPU#%d, " + "should never happen.\n", smp_processor_id()); irq_exit(); } /* * This interrupt should never happen with our APIC/SMP architecture */ - fastcall void smp_error_interrupt(struct pt_regs *regs) { unsigned long v, v1; @@ -1352,69 +1195,261 @@ fastcall void smp_error_interrupt(struct pt_regs *regs) 7: Illegal register address */ printk (KERN_DEBUG "APIC error on CPU%d: %02lx(%02lx)\n", - smp_processor_id(), v , v1); + smp_processor_id(), v , v1); irq_exit(); } /* - * This initializes the IO-APIC and APIC hardware if this is - * a UP kernel. + * Initialize APIC interrupts */ -int __init APIC_init_uniprocessor (void) +void __init apic_intr_init(void) { - if (enable_local_apic < 0) - clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability); +#ifdef CONFIG_SMP + smp_intr_init(); +#endif + /* self generated IPI for local APIC timer */ + set_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); - if (!smp_found_config && !cpu_has_apic) - return -1; + /* IPI vectors for APIC spurious and error interrupts */ + set_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); + set_intr_gate(ERROR_APIC_VECTOR, error_interrupt); - /* - * Complain if the BIOS pretends there is one. - */ - if (!cpu_has_apic && APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) { - printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n", - boot_cpu_physical_apicid); - clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability); - return -1; + /* thermal monitor LVT interrupt */ +#ifdef CONFIG_X86_MCE_P4THERMAL + set_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); +#endif +} + +/** + * connect_bsp_APIC - attach the APIC to the interrupt system + */ +void __init connect_bsp_APIC(void) +{ + if (pic_mode) { + /* + * Do not trust the local APIC being empty at bootup. + */ + clear_local_APIC(); + /* + * PIC mode, enable APIC mode in the IMCR, i.e. connect BSP's + * local APIC to INT and NMI lines. + */ + apic_printk(APIC_VERBOSE, "leaving PIC mode, " + "enabling APIC mode.\n"); + outb(0x70, 0x22); + outb(0x01, 0x23); } + enable_apic_mode(); +} - verify_local_APIC(); +/** + * disconnect_bsp_APIC - detach the APIC from the interrupt system + * @virt_wire_setup: indicates, whether virtual wire mode is selected + * + * Virtual wire mode is necessary to deliver legacy interrupts even when the + * APIC is disabled. + */ +void disconnect_bsp_APIC(int virt_wire_setup) +{ + if (pic_mode) { + /* + * Put the board back into PIC mode (has an effect only on + * certain older boards). Note that APIC interrupts, including + * IPIs, won't work beyond this point! The only exception are + * INIT IPIs. + */ + apic_printk(APIC_VERBOSE, "disabling APIC mode, " + "entering PIC mode.\n"); + outb(0x70, 0x22); + outb(0x00, 0x23); + } else { + /* Go back to Virtual Wire compatibility mode */ + unsigned long value; - connect_bsp_APIC(); + /* For the spurious interrupt use vector F, and enable it */ + value = apic_read(APIC_SPIV); + value &= ~APIC_VECTOR_MASK; + value |= APIC_SPIV_APIC_ENABLED; + value |= 0xf; + apic_write_around(APIC_SPIV, value); - /* - * Hack: In case of kdump, after a crash, kernel might be booting - * on a cpu with non-zero lapic id. But boot_cpu_physical_apicid - * might be zero if read from MP tables. Get it from LAPIC. - */ -#ifdef CONFIG_CRASH_DUMP - boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID)); -#endif - phys_cpu_present_map = physid_mask_of_physid(boot_cpu_physical_apicid); + if (!virt_wire_setup) { + /* + * For LVT0 make it edge triggered, active high, + * external and enabled + */ + value = apic_read(APIC_LVT0); + value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING | + APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | + APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED ); + value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING; + value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT); + apic_write_around(APIC_LVT0, value); + } else { + /* Disable LVT0 */ + apic_write_around(APIC_LVT0, APIC_LVT_MASKED); + } - setup_local_APIC(); + /* + * For LVT1 make it edge triggered, active high, nmi and + * enabled + */ + value = apic_read(APIC_LVT1); + value &= ~( + APIC_MODE_MASK | APIC_SEND_PENDING | + APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | + APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED); + value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING; + value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI); + apic_write_around(APIC_LVT1, value); + } +} -#ifdef CONFIG_X86_IO_APIC - if (smp_found_config) - if (!skip_ioapic_setup && nr_ioapics) - setup_IO_APIC(); +/* + * Power management + */ +#ifdef CONFIG_PM + +static struct { + int active; + /* r/w apic fields */ + unsigned int apic_id; + unsigned int apic_taskpri; + unsigned int apic_ldr; + unsigned int apic_dfr; + unsigned int apic_spiv; + unsigned int apic_lvtt; + unsigned int apic_lvtpc; + unsigned int apic_lvt0; + unsigned int apic_lvt1; + unsigned int apic_lvterr; + unsigned int apic_tmict; + unsigned int apic_tdcr; + unsigned int apic_thmr; +} apic_pm_state; + +static int lapic_suspend(struct sys_device *dev, pm_message_t state) +{ + unsigned long flags; + int maxlvt; + + if (!apic_pm_state.active) + return 0; + + maxlvt = lapic_get_maxlvt(); + + apic_pm_state.apic_id = apic_read(APIC_ID); + apic_pm_state.apic_taskpri = apic_read(APIC_TASKPRI); + apic_pm_state.apic_ldr = apic_read(APIC_LDR); + apic_pm_state.apic_dfr = apic_read(APIC_DFR); + apic_pm_state.apic_spiv = apic_read(APIC_SPIV); + apic_pm_state.apic_lvtt = apic_read(APIC_LVTT); + if (maxlvt >= 4) + apic_pm_state.apic_lvtpc = apic_read(APIC_LVTPC); + apic_pm_state.apic_lvt0 = apic_read(APIC_LVT0); + apic_pm_state.apic_lvt1 = apic_read(APIC_LVT1); + apic_pm_state.apic_lvterr = apic_read(APIC_LVTERR); + apic_pm_state.apic_tmict = apic_read(APIC_TMICT); + apic_pm_state.apic_tdcr = apic_read(APIC_TDCR); +#ifdef CONFIG_X86_MCE_P4THERMAL + if (maxlvt >= 5) + apic_pm_state.apic_thmr = apic_read(APIC_LVTTHMR); #endif - setup_boot_clock(); + local_irq_save(flags); + disable_local_APIC(); + local_irq_restore(flags); return 0; } -static int __init parse_lapic(char *arg) +static int lapic_resume(struct sys_device *dev) { - lapic_enable(); + unsigned int l, h; + unsigned long flags; + int maxlvt; + + if (!apic_pm_state.active) + return 0; + + maxlvt = lapic_get_maxlvt(); + + local_irq_save(flags); + + /* + * Make sure the APICBASE points to the right address + * + * FIXME! This will be wrong if we ever support suspend on + * SMP! We'll need to do this as part of the CPU restore! + */ + rdmsr(MSR_IA32_APICBASE, l, h); + l &= ~MSR_IA32_APICBASE_BASE; + l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr; + wrmsr(MSR_IA32_APICBASE, l, h); + + apic_write(APIC_LVTERR, ERROR_APIC_VECTOR | APIC_LVT_MASKED); + apic_write(APIC_ID, apic_pm_state.apic_id); + apic_write(APIC_DFR, apic_pm_state.apic_dfr); + apic_write(APIC_LDR, apic_pm_state.apic_ldr); + apic_write(APIC_TASKPRI, apic_pm_state.apic_taskpri); + apic_write(APIC_SPIV, apic_pm_state.apic_spiv); + apic_write(APIC_LVT0, apic_pm_state.apic_lvt0); + apic_write(APIC_LVT1, apic_pm_state.apic_lvt1); +#ifdef CONFIG_X86_MCE_P4THERMAL + if (maxlvt >= 5) + apic_write(APIC_LVTTHMR, apic_pm_state.apic_thmr); +#endif + if (maxlvt >= 4) + apic_write(APIC_LVTPC, apic_pm_state.apic_lvtpc); + apic_write(APIC_LVTT, apic_pm_state.apic_lvtt); + apic_write(APIC_TDCR, apic_pm_state.apic_tdcr); + apic_write(APIC_TMICT, apic_pm_state.apic_tmict); + apic_write(APIC_ESR, 0); + apic_read(APIC_ESR); + apic_write(APIC_LVTERR, apic_pm_state.apic_lvterr); + apic_write(APIC_ESR, 0); + apic_read(APIC_ESR); + local_irq_restore(flags); return 0; } -early_param("lapic", parse_lapic); -static int __init parse_nolapic(char *arg) +/* + * This device has no shutdown method - fully functioning local APICs + * are needed on every CPU up until machine_halt/restart/poweroff. + */ + +static struct sysdev_class lapic_sysclass = { + set_kset_name("lapic"), + .resume = lapic_resume, + .suspend = lapic_suspend, +}; + +static struct sys_device device_lapic = { + .id = 0, + .cls = &lapic_sysclass, +}; + +static void __devinit apic_pm_activate(void) { - lapic_disable(); - return 0; + apic_pm_state.active = 1; } -early_param("nolapic", parse_nolapic); +static int __init init_lapic_sysfs(void) +{ + int error; + + if (!cpu_has_apic) + return 0; + /* XXX: remove suspend/resume procs if !apic_pm_state.active? */ + + error = sysdev_class_register(&lapic_sysclass); + if (!error) + error = sysdev_register(&device_lapic); + return error; +} +device_initcall(init_lapic_sysfs); + +#else /* CONFIG_PM */ + +static void apic_pm_activate(void) { } + +#endif /* CONFIG_PM */ diff --git a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c index c76be1110922..f003a4ce0a93 100644 --- a/arch/i386/kernel/io_apic.c +++ b/arch/i386/kernel/io_apic.c @@ -1588,7 +1588,7 @@ void /*__init*/ print_local_APIC(void * dummy) v = apic_read(APIC_LVR); printk(KERN_INFO "... APIC VERSION: %08x\n", v); ver = GET_APIC_VERSION(v); - maxlvt = get_maxlvt(); + maxlvt = lapic_get_maxlvt(); v = apic_read(APIC_TASKPRI); printk(KERN_DEBUG "... APIC TASKPRI: %08x (%02x)\n", v, v & APIC_TPRI_MASK); diff --git a/arch/i386/kernel/irq.c b/arch/i386/kernel/irq.c index 5785d84103a6..0f2ca590bf23 100644 --- a/arch/i386/kernel/irq.c +++ b/arch/i386/kernel/irq.c @@ -10,7 +10,6 @@ * io_apic.c.) */ -#include #include #include #include @@ -21,19 +20,34 @@ #include +#include +#include + DEFINE_PER_CPU(irq_cpustat_t, irq_stat) ____cacheline_internodealigned_in_smp; EXPORT_PER_CPU_SYMBOL(irq_stat); -#ifndef CONFIG_X86_LOCAL_APIC /* * 'what should we do if we get a hw irq event on an illegal vector'. * each architecture has to answer this themselves. */ void ack_bad_irq(unsigned int irq) { - printk("unexpected IRQ trap at vector %02x\n", irq); -} + printk(KERN_ERR "unexpected IRQ trap at vector %02x\n", irq); + +#ifdef CONFIG_X86_LOCAL_APIC + /* + * Currently unexpected vectors happen only on SMP and APIC. + * We _must_ ack these because every local APIC has only N + * irq slots per priority level, and a 'hanging, unacked' IRQ + * holds up an irq slot - in excessive cases (when multiple + * unexpected vectors occur) that might lock up the APIC + * completely. + * But only ack when the APIC is enabled -AK + */ + if (cpu_has_apic) + ack_APIC_irq(); #endif +} #ifdef CONFIG_4KSTACKS /* diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c index 6ddffe8aabb2..6cdd941fc2f2 100644 --- a/arch/i386/kernel/smpboot.c +++ b/arch/i386/kernel/smpboot.c @@ -600,7 +600,7 @@ wakeup_secondary_cpu(int logical_apicid, unsigned long start_eip) /* * Due to the Pentium erratum 3AP. */ - maxlvt = get_maxlvt(); + maxlvt = lapic_get_maxlvt(); if (maxlvt > 3) { apic_read_around(APIC_SPIV); apic_write(APIC_ESR, 0); @@ -697,7 +697,7 @@ wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip) */ Dprintk("#startup loops: %d.\n", num_starts); - maxlvt = get_maxlvt(); + maxlvt = lapic_get_maxlvt(); for (j = 1; j <= num_starts; j++) { Dprintk("Sending STARTUP #%d.\n",j); -- cgit v1.2.3 From e9e2cdb412412326c4827fc78ba27f410d837e6e Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 16 Feb 2007 01:28:04 -0800 Subject: [PATCH] clockevents: i386 drivers Add clockevent drivers for i386: lapic (local) and PIT/HPET (global). Update the timer IRQ to call into the PIT/HPET driver's event handler and the lapic-timer IRQ to call into the lapic clockevent driver. The assignement of timer functionality is delegated to the core framework code and replaces the compile and runtime evalution in do_timer_interrupt_hook() Use the clockevents broadcast support and implement the lapic_broadcast function for ACPI. No changes to existing functionality. [ kdump fix from Vivek Goyal ] [ fixes based on review feedback from Arjan van de Ven ] Cleanups-from: Adrian Bunk Build-fixes-from: Andrew Morton Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar Cc: john stultz Cc: Roman Zippel Cc: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/Kconfig | 8 + arch/i386/kernel/Makefile | 1 - arch/i386/kernel/apic.c | 291 ++++++++++++------------ arch/i386/kernel/hpet.c | 496 ++++++++++++++++++++++++++++++++++++++-- arch/i386/kernel/i8253.c | 96 +++++++- arch/i386/kernel/i8259.c | 6 - arch/i386/kernel/smpboot.c | 5 +- arch/i386/kernel/time.c | 70 +----- arch/i386/kernel/time_hpet.c | 497 ----------------------------------------- arch/i386/mach-default/setup.c | 8 +- 10 files changed, 732 insertions(+), 746 deletions(-) delete mode 100644 arch/i386/kernel/time_hpet.c (limited to 'arch') diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig index 458b3aad3eb3..490be6f77bbf 100644 --- a/arch/i386/Kconfig +++ b/arch/i386/Kconfig @@ -22,6 +22,14 @@ config CLOCKSOURCE_WATCHDOG bool default y +config GENERIC_CLOCKEVENTS + bool + default y + +config GENERIC_CLOCKEVENTS_BROADCAST + bool + default y + config LOCKDEP_SUPPORT bool default y diff --git a/arch/i386/kernel/Makefile b/arch/i386/kernel/Makefile index c2b3b79dc436..4ae3dcf1d2f0 100644 --- a/arch/i386/kernel/Makefile +++ b/arch/i386/kernel/Makefile @@ -32,7 +32,6 @@ obj-$(CONFIG_KPROBES) += kprobes.o obj-$(CONFIG_MODULES) += module.o obj-y += sysenter.o vsyscall.o obj-$(CONFIG_ACPI_SRAT) += srat.o -obj-$(CONFIG_HPET_TIMER) += time_hpet.o obj-$(CONFIG_EFI) += efi.o efi_stub.o obj-$(CONFIG_DOUBLEFAULT) += doublefault.o obj-$(CONFIG_VM86) += vm86.o diff --git a/arch/i386/kernel/apic.c b/arch/i386/kernel/apic.c index b56448f214a7..e98b5c750bdf 100644 --- a/arch/i386/kernel/apic.c +++ b/arch/i386/kernel/apic.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include @@ -51,12 +52,6 @@ # error SPURIOUS_APIC_VECTOR definition error #endif -/* - * cpu_mask that denotes the CPUs that needs timer interrupt coming in as - * IPIs in place of local APIC timers - */ -static cpumask_t timer_bcast_ipi; - /* * Knob to control our willingness to enable the local APIC. * @@ -64,16 +59,38 @@ static cpumask_t timer_bcast_ipi; */ static int enable_local_apic __initdata = 0; +/* Enable local APIC timer for highres/dyntick on UP */ +static int enable_local_apic_timer __initdata = 0; + /* * Debug level, exported for io_apic.c */ int apic_verbosity; -static void apic_pm_activate(void); +static unsigned int calibration_result; +static int lapic_next_event(unsigned long delta, + struct clock_event_device *evt); +static void lapic_timer_setup(enum clock_event_mode mode, + struct clock_event_device *evt); +static void lapic_timer_broadcast(cpumask_t mask); +static void apic_pm_activate(void); -/* Using APIC to generate smp_local_timer_interrupt? */ -int using_apic_timer __read_mostly = 0; +/* + * The local apic timer can be used for any function which is CPU local. + */ +static struct clock_event_device lapic_clockevent = { + .name = "lapic", + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT + | CLOCK_EVT_FEAT_C3STOP, + .shift = 32, + .set_mode = lapic_timer_setup, + .set_next_event = lapic_next_event, + .broadcast = lapic_timer_broadcast, + .rating = 100, + .irq = -1, +}; +static DEFINE_PER_CPU(struct clock_event_device, lapic_events); /* Local APIC was disabled by the BIOS and enabled by the kernel */ static int enabled_via_apicbase; @@ -151,6 +168,11 @@ int lapic_get_maxlvt(void) * closely follows bus clocks. */ +/* + * FIXME: Move this to i8253.h. There is no need to keep the access to + * the PIT scattered all around the place -tglx + */ + /* * The timer chip is already set up at HZ interrupts per second here, * but we do not accept timer interrupts yet. We only allow the BP @@ -209,16 +231,17 @@ void (*wait_timer_tick)(void) __devinitdata = wait_8254_wraparound; #define APIC_DIVISOR 16 -static void __setup_APIC_LVTT(unsigned int clocks) +static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen) { unsigned int lvtt_value, tmp_value; - int cpu = smp_processor_id(); - lvtt_value = APIC_LVT_TIMER_PERIODIC | LOCAL_TIMER_VECTOR; + lvtt_value = LOCAL_TIMER_VECTOR; + if (!oneshot) + lvtt_value |= APIC_LVT_TIMER_PERIODIC; if (!lapic_is_integrated()) lvtt_value |= SET_APIC_TIMER_BASE(APIC_TIMER_BASE_DIV); - if (cpu_isset(cpu, timer_bcast_ipi)) + if (!irqen) lvtt_value |= APIC_LVT_MASKED; apic_write_around(APIC_LVTT, lvtt_value); @@ -231,31 +254,80 @@ static void __setup_APIC_LVTT(unsigned int clocks) & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE)) | APIC_TDR_DIV_16); - apic_write_around(APIC_TMICT, clocks/APIC_DIVISOR); + if (!oneshot) + apic_write_around(APIC_TMICT, clocks/APIC_DIVISOR); +} + +/* + * Program the next event, relative to now + */ +static int lapic_next_event(unsigned long delta, + struct clock_event_device *evt) +{ + apic_write_around(APIC_TMICT, delta); + return 0; } -static void __devinit setup_APIC_timer(unsigned int clocks) +/* + * Setup the lapic timer in periodic or oneshot mode + */ +static void lapic_timer_setup(enum clock_event_mode mode, + struct clock_event_device *evt) { unsigned long flags; + unsigned int v; local_irq_save(flags); - /* - * Wait for IRQ0's slice: - */ - wait_timer_tick(); - - __setup_APIC_LVTT(clocks); + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + case CLOCK_EVT_MODE_ONESHOT: + __setup_APIC_LVTT(calibration_result, + mode != CLOCK_EVT_MODE_PERIODIC, 1); + break; + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + v = apic_read(APIC_LVTT); + v |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR); + apic_write_around(APIC_LVTT, v); + break; + } local_irq_restore(flags); } +/* + * Local APIC timer broadcast function + */ +static void lapic_timer_broadcast(cpumask_t mask) +{ +#ifdef CONFIG_SMP + send_IPI_mask(mask, LOCAL_TIMER_VECTOR); +#endif +} + +/* + * Setup the local APIC timer for this CPU. Copy the initilized values + * of the boot CPU and register the clock event in the framework. + */ +static void __devinit setup_APIC_timer(void) +{ + struct clock_event_device *levt = &__get_cpu_var(lapic_events); + + memcpy(levt, &lapic_clockevent, sizeof(*levt)); + levt->cpumask = cpumask_of_cpu(smp_processor_id()); + + clockevents_register_device(levt); +} + /* * In this function we calibrate APIC bus clocks to the external * timer. Unfortunately we cannot use jiffies and the timer irq * to calibrate, since some later bootup code depends on getting * the first irq? Ugh. * + * TODO: Fix this rather than saying "Ugh" -tglx + * * We want to do the calibration only once since we * want to have local timer irqs syncron. CPUs connected * by the same APIC bus have the very same bus frequency. @@ -278,7 +350,7 @@ static int __init calibrate_APIC_clock(void) * value into the APIC clock, we just want to get the * counter running for calibration. */ - __setup_APIC_LVTT(1000000000); + __setup_APIC_LVTT(1000000000, 0, 0); /* * The timer chip counts down to zero. Let's wait @@ -315,6 +387,17 @@ static int __init calibrate_APIC_clock(void) result = (tt1-tt2)*APIC_DIVISOR/LOOPS; + /* Calculate the scaled math multiplication factor */ + lapic_clockevent.mult = div_sc(tt1-tt2, TICK_NSEC * LOOPS, 32); + lapic_clockevent.max_delta_ns = + clockevent_delta2ns(0x7FFFFF, &lapic_clockevent); + lapic_clockevent.min_delta_ns = + clockevent_delta2ns(0xF, &lapic_clockevent); + + apic_printk(APIC_VERBOSE, "..... tt1-tt2 %ld\n", tt1 - tt2); + apic_printk(APIC_VERBOSE, "..... mult: %ld\n", lapic_clockevent.mult); + apic_printk(APIC_VERBOSE, "..... calibration result: %ld\n", result); + if (cpu_has_tsc) apic_printk(APIC_VERBOSE, "..... CPU clock speed is " "%ld.%04ld MHz.\n", @@ -329,13 +412,10 @@ static int __init calibrate_APIC_clock(void) return result; } -static unsigned int calibration_result; - void __init setup_boot_APIC_clock(void) { unsigned long flags; apic_printk(APIC_VERBOSE, "Using local APIC timer interrupts.\n"); - using_apic_timer = 1; local_irq_save(flags); @@ -343,97 +423,47 @@ void __init setup_boot_APIC_clock(void) /* * Now set up the timer for real. */ - setup_APIC_timer(calibration_result); + setup_APIC_timer(); local_irq_restore(flags); } void __devinit setup_secondary_APIC_clock(void) { - setup_APIC_timer(calibration_result); -} - -void disable_APIC_timer(void) -{ - if (using_apic_timer) { - unsigned long v; - - v = apic_read(APIC_LVTT); - /* - * When an illegal vector value (0-15) is written to an LVT - * entry and delivery mode is Fixed, the APIC may signal an - * illegal vector error, with out regard to whether the mask - * bit is set or whether an interrupt is actually seen on - * input. - * - * Boot sequence might call this function when the LVTT has - * '0' vector value. So make sure vector field is set to - * valid value. - */ - v |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR); - apic_write_around(APIC_LVTT, v); - } -} - -void enable_APIC_timer(void) -{ - int cpu = smp_processor_id(); - - if (using_apic_timer && !cpu_isset(cpu, timer_bcast_ipi)) { - unsigned long v; - - v = apic_read(APIC_LVTT); - apic_write_around(APIC_LVTT, v & ~APIC_LVT_MASKED); - } -} - -void switch_APIC_timer_to_ipi(void *cpumask) -{ - cpumask_t mask = *(cpumask_t *)cpumask; - int cpu = smp_processor_id(); - - if (cpu_isset(cpu, mask) && - !cpu_isset(cpu, timer_bcast_ipi)) { - disable_APIC_timer(); - cpu_set(cpu, timer_bcast_ipi); - } -} -EXPORT_SYMBOL(switch_APIC_timer_to_ipi); - -void switch_ipi_to_APIC_timer(void *cpumask) -{ - cpumask_t mask = *(cpumask_t *)cpumask; - int cpu = smp_processor_id(); - - if (cpu_isset(cpu, mask) && - cpu_isset(cpu, timer_bcast_ipi)) { - cpu_clear(cpu, timer_bcast_ipi); - enable_APIC_timer(); - } + setup_APIC_timer(); } -EXPORT_SYMBOL(switch_ipi_to_APIC_timer); /* - * Local timer interrupt handler. It does both profiling and - * process statistics/rescheduling. + * The guts of the apic timer interrupt */ -inline void smp_local_timer_interrupt(void) +static void local_apic_timer_interrupt(void) { - profile_tick(CPU_PROFILING); -#ifdef CONFIG_SMP - update_process_times(user_mode_vm(get_irq_regs())); -#endif + int cpu = smp_processor_id(); + struct clock_event_device *evt = &per_cpu(lapic_events, cpu); /* - * We take the 'long' return path, and there every subsystem - * grabs the apropriate locks (kernel lock/ irq lock). + * Normally we should not be here till LAPIC has been + * initialized but in some cases like kdump, its possible that + * there is a pending LAPIC timer interrupt from previous + * kernel's context and is delivered in new kernel the moment + * interrupts are enabled. * - * we might want to decouple profiling from the 'long path', - * and do the profiling totally in assembly. - * - * Currently this isn't too much of an issue (performance wise), - * we can take more than 100K local irqs per second on a 100 MHz P5. + * Interrupts are enabled early and LAPIC is setup much later, + * hence its possible that when we get here evt->event_handler + * is NULL. Check for event_handler being NULL and discard + * the interrupt as spurious. */ + if (!evt->event_handler) { + printk(KERN_WARNING + "Spurious LAPIC timer interrupt on cpu %d\n", cpu); + /* Switch it off */ + lapic_timer_setup(CLOCK_EVT_MODE_SHUTDOWN, evt); + return; + } + + per_cpu(irq_stat, cpu).apic_timer_irqs++; + + evt->event_handler(evt); } /* @@ -445,15 +475,9 @@ inline void smp_local_timer_interrupt(void) * interrupt as well. Thus we cannot inline the local irq ... ] */ -fastcall void smp_apic_timer_interrupt(struct pt_regs *regs) +void fastcall smp_apic_timer_interrupt(struct pt_regs *regs) { struct pt_regs *old_regs = set_irq_regs(regs); - int cpu = smp_processor_id(); - - /* - * the NMI deadlock-detector uses this. - */ - per_cpu(irq_stat, cpu).apic_timer_irqs++; /* * NOTE! We'd better ACK the irq immediately, @@ -467,41 +491,10 @@ fastcall void smp_apic_timer_interrupt(struct pt_regs *regs) */ exit_idle(); irq_enter(); - smp_local_timer_interrupt(); + local_apic_timer_interrupt(); irq_exit(); - set_irq_regs(old_regs); -} -#ifndef CONFIG_SMP -static void up_apic_timer_interrupt_call(void) -{ - int cpu = smp_processor_id(); - - /* - * the NMI deadlock-detector uses this. - */ - per_cpu(irq_stat, cpu).apic_timer_irqs++; - - smp_local_timer_interrupt(); -} -#endif - -void smp_send_timer_broadcast_ipi(void) -{ - cpumask_t mask; - - cpus_and(mask, cpu_online_map, timer_bcast_ipi); - if (!cpus_empty(mask)) { -#ifdef CONFIG_SMP - send_IPI_mask(mask, LOCAL_TIMER_VECTOR); -#else - /* - * We can directly call the apic timer interrupt handler - * in UP case. Minus all irq related functions - */ - up_apic_timer_interrupt_call(); -#endif - } + set_irq_regs(old_regs); } int setup_profiling_timer(unsigned int multiplier) @@ -914,6 +907,11 @@ void __devinit setup_local_APIC(void) printk(KERN_INFO "No ESR for 82489DX.\n"); } + /* Disable the local apic timer */ + value = apic_read(APIC_LVTT); + value |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR); + apic_write_around(APIC_LVTT, value); + setup_apic_nmi_watchdog(NULL); apic_pm_activate(); } @@ -1128,6 +1126,13 @@ static int __init parse_nolapic(char *arg) } early_param("nolapic", parse_nolapic); +static int __init apic_enable_lapic_timer(char *str) +{ + enable_local_apic_timer = 1; + return 0; +} +early_param("lapictimer", apic_enable_lapic_timer); + static int __init apic_set_verbosity(char *str) { if (strcmp("debug", str) == 0) @@ -1147,7 +1152,7 @@ __setup("apic=", apic_set_verbosity); /* * This interrupt should _never_ happen with our APIC/SMP architecture */ -fastcall void smp_spurious_interrupt(struct pt_regs *regs) +void smp_spurious_interrupt(struct pt_regs *regs) { unsigned long v; @@ -1171,7 +1176,7 @@ fastcall void smp_spurious_interrupt(struct pt_regs *regs) /* * This interrupt should never happen with our APIC/SMP architecture */ -fastcall void smp_error_interrupt(struct pt_regs *regs) +void smp_error_interrupt(struct pt_regs *regs) { unsigned long v, v1; diff --git a/arch/i386/kernel/hpet.c b/arch/i386/kernel/hpet.c index 7d2739fff3a3..e1006b7acc9e 100644 --- a/arch/i386/kernel/hpet.c +++ b/arch/i386/kernel/hpet.c @@ -1,4 +1,5 @@ #include +#include #include #include #include @@ -6,17 +7,278 @@ #include #include +extern struct clock_event_device *global_clock_event; + #define HPET_MASK CLOCKSOURCE_MASK(32) #define HPET_SHIFT 22 /* FSEC = 10^-15 NSEC = 10^-9 */ #define FSEC_PER_NSEC 1000000 -static void __iomem *hpet_ptr; +/* + * HPET address is set in acpi/boot.c, when an ACPI entry exists + */ +unsigned long hpet_address; +static void __iomem * hpet_virt_address; + +static inline unsigned long hpet_readl(unsigned long a) +{ + return readl(hpet_virt_address + a); +} + +static inline void hpet_writel(unsigned long d, unsigned long a) +{ + writel(d, hpet_virt_address + a); +} + +/* + * HPET command line enable / disable + */ +static int boot_hpet_disable; + +static int __init hpet_setup(char* str) +{ + if (str) { + if (!strncmp("disable", str, 7)) + boot_hpet_disable = 1; + } + return 1; +} +__setup("hpet=", hpet_setup); + +static inline int is_hpet_capable(void) +{ + return (!boot_hpet_disable && hpet_address); +} + +/* + * HPET timer interrupt enable / disable + */ +static int hpet_legacy_int_enabled; + +/** + * is_hpet_enabled - check whether the hpet timer interrupt is enabled + */ +int is_hpet_enabled(void) +{ + return is_hpet_capable() && hpet_legacy_int_enabled; +} + +/* + * When the hpet driver (/dev/hpet) is enabled, we need to reserve + * timer 0 and timer 1 in case of RTC emulation. + */ +#ifdef CONFIG_HPET +static void hpet_reserve_platform_timers(unsigned long id) +{ + struct hpet __iomem *hpet = hpet_virt_address; + struct hpet_timer __iomem *timer = &hpet->hpet_timers[2]; + unsigned int nrtimers, i; + struct hpet_data hd; + + nrtimers = ((id & HPET_ID_NUMBER) >> HPET_ID_NUMBER_SHIFT) + 1; + + memset(&hd, 0, sizeof (hd)); + hd.hd_phys_address = hpet_address; + hd.hd_address = hpet_virt_address; + hd.hd_nirqs = nrtimers; + hd.hd_flags = HPET_DATA_PLATFORM; + hpet_reserve_timer(&hd, 0); + +#ifdef CONFIG_HPET_EMULATE_RTC + hpet_reserve_timer(&hd, 1); +#endif + + hd.hd_irq[0] = HPET_LEGACY_8254; + hd.hd_irq[1] = HPET_LEGACY_RTC; + + for (i = 2; i < nrtimers; timer++, i++) + hd.hd_irq[i] = (timer->hpet_config & Tn_INT_ROUTE_CNF_MASK) >> + Tn_INT_ROUTE_CNF_SHIFT; + + hpet_alloc(&hd); + +} +#else +static void hpet_reserve_platform_timers(unsigned long id) { } +#endif + +/* + * Common hpet info + */ +static unsigned long hpet_period; + +static void hpet_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt); +static int hpet_next_event(unsigned long delta, + struct clock_event_device *evt); + +/* + * The hpet clock event device + */ +static struct clock_event_device hpet_clockevent = { + .name = "hpet", + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .set_mode = hpet_set_mode, + .set_next_event = hpet_next_event, + .shift = 32, + .irq = 0, +}; + +static void hpet_start_counter(void) +{ + unsigned long cfg = hpet_readl(HPET_CFG); + + cfg &= ~HPET_CFG_ENABLE; + hpet_writel(cfg, HPET_CFG); + hpet_writel(0, HPET_COUNTER); + hpet_writel(0, HPET_COUNTER + 4); + cfg |= HPET_CFG_ENABLE; + hpet_writel(cfg, HPET_CFG); +} + +static void hpet_enable_int(void) +{ + unsigned long cfg = hpet_readl(HPET_CFG); + + cfg |= HPET_CFG_LEGACY; + hpet_writel(cfg, HPET_CFG); + hpet_legacy_int_enabled = 1; +} + +static void hpet_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + unsigned long cfg, cmp, now; + uint64_t delta; + + switch(mode) { + case CLOCK_EVT_MODE_PERIODIC: + delta = ((uint64_t)(NSEC_PER_SEC/HZ)) * hpet_clockevent.mult; + delta >>= hpet_clockevent.shift; + now = hpet_readl(HPET_COUNTER); + cmp = now + (unsigned long) delta; + cfg = hpet_readl(HPET_T0_CFG); + cfg |= HPET_TN_ENABLE | HPET_TN_PERIODIC | + HPET_TN_SETVAL | HPET_TN_32BIT; + hpet_writel(cfg, HPET_T0_CFG); + /* + * The first write after writing TN_SETVAL to the + * config register sets the counter value, the second + * write sets the period. + */ + hpet_writel(cmp, HPET_T0_CMP); + udelay(1); + hpet_writel((unsigned long) delta, HPET_T0_CMP); + break; + + case CLOCK_EVT_MODE_ONESHOT: + cfg = hpet_readl(HPET_T0_CFG); + cfg &= ~HPET_TN_PERIODIC; + cfg |= HPET_TN_ENABLE | HPET_TN_32BIT; + hpet_writel(cfg, HPET_T0_CFG); + break; + + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + cfg = hpet_readl(HPET_T0_CFG); + cfg &= ~HPET_TN_ENABLE; + hpet_writel(cfg, HPET_T0_CFG); + break; + } +} + +static int hpet_next_event(unsigned long delta, + struct clock_event_device *evt) +{ + unsigned long cnt; + + cnt = hpet_readl(HPET_COUNTER); + cnt += delta; + hpet_writel(cnt, HPET_T0_CMP); + + return ((long)(hpet_readl(HPET_COUNTER) - cnt ) > 0); +} + +/* + * Try to setup the HPET timer + */ +int __init hpet_enable(void) +{ + unsigned long id; + uint64_t hpet_freq; + + if (!is_hpet_capable()) + return 0; + + hpet_virt_address = ioremap_nocache(hpet_address, HPET_MMAP_SIZE); + + /* + * Read the period and check for a sane value: + */ + hpet_period = hpet_readl(HPET_PERIOD); + if (hpet_period < HPET_MIN_PERIOD || hpet_period > HPET_MAX_PERIOD) + goto out_nohpet; + + /* + * The period is a femto seconds value. We need to calculate the + * scaled math multiplication factor for nanosecond to hpet tick + * conversion. + */ + hpet_freq = 1000000000000000ULL; + do_div(hpet_freq, hpet_period); + hpet_clockevent.mult = div_sc((unsigned long) hpet_freq, + NSEC_PER_SEC, 32); + /* Calculate the min / max delta */ + hpet_clockevent.max_delta_ns = clockevent_delta2ns(0x7FFFFFFF, + &hpet_clockevent); + hpet_clockevent.min_delta_ns = clockevent_delta2ns(0x30, + &hpet_clockevent); + + /* + * Read the HPET ID register to retrieve the IRQ routing + * information and the number of channels + */ + id = hpet_readl(HPET_ID); + +#ifdef CONFIG_HPET_EMULATE_RTC + /* + * The legacy routing mode needs at least two channels, tick timer + * and the rtc emulation channel. + */ + if (!(id & HPET_ID_NUMBER)) + goto out_nohpet; +#endif + + /* Start the counter */ + hpet_start_counter(); + + if (id & HPET_ID_LEGSUP) { + hpet_enable_int(); + hpet_reserve_platform_timers(id); + /* + * Start hpet with the boot cpu mask and make it + * global after the IO_APIC has been initialized. + */ + hpet_clockevent.cpumask =cpumask_of_cpu(0); + clockevents_register_device(&hpet_clockevent); + global_clock_event = &hpet_clockevent; + return 1; + } + return 0; +out_nohpet: + iounmap(hpet_virt_address); + hpet_virt_address = NULL; + return 0; +} + +/* + * Clock source related code + */ static cycle_t read_hpet(void) { - return (cycle_t)readl(hpet_ptr); + return (cycle_t)hpet_readl(HPET_COUNTER); } static struct clocksource clocksource_hpet = { @@ -24,28 +286,17 @@ static struct clocksource clocksource_hpet = { .rating = 250, .read = read_hpet, .mask = HPET_MASK, - .mult = 0, /* set below */ .shift = HPET_SHIFT, .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; static int __init init_hpet_clocksource(void) { - unsigned long hpet_period; - void __iomem* hpet_base; u64 tmp; - int err; - if (!is_hpet_enabled()) + if (!hpet_virt_address) return -ENODEV; - /* calculate the hpet address: */ - hpet_base = ioremap_nocache(hpet_address, HPET_MMAP_SIZE); - hpet_ptr = hpet_base + HPET_COUNTER; - - /* calculate the frequency: */ - hpet_period = readl(hpet_base + HPET_PERIOD); - /* * hpet period is in femto seconds per cycle * so we need to convert this to ns/cyc units @@ -61,11 +312,218 @@ static int __init init_hpet_clocksource(void) do_div(tmp, FSEC_PER_NSEC); clocksource_hpet.mult = (u32)tmp; - err = clocksource_register(&clocksource_hpet); - if (err) - iounmap(hpet_base); - - return err; + return clocksource_register(&clocksource_hpet); } module_init(init_hpet_clocksource); + +#ifdef CONFIG_HPET_EMULATE_RTC + +/* HPET in LegacyReplacement Mode eats up RTC interrupt line. When, HPET + * is enabled, we support RTC interrupt functionality in software. + * RTC has 3 kinds of interrupts: + * 1) Update Interrupt - generate an interrupt, every sec, when RTC clock + * is updated + * 2) Alarm Interrupt - generate an interrupt at a specific time of day + * 3) Periodic Interrupt - generate periodic interrupt, with frequencies + * 2Hz-8192Hz (2Hz-64Hz for non-root user) (all freqs in powers of 2) + * (1) and (2) above are implemented using polling at a frequency of + * 64 Hz. The exact frequency is a tradeoff between accuracy and interrupt + * overhead. (DEFAULT_RTC_INT_FREQ) + * For (3), we use interrupts at 64Hz or user specified periodic + * frequency, whichever is higher. + */ +#include +#include + +#define DEFAULT_RTC_INT_FREQ 64 +#define DEFAULT_RTC_SHIFT 6 +#define RTC_NUM_INTS 1 + +static unsigned long hpet_rtc_flags; +static unsigned long hpet_prev_update_sec; +static struct rtc_time hpet_alarm_time; +static unsigned long hpet_pie_count; +static unsigned long hpet_t1_cmp; +static unsigned long hpet_default_delta; +static unsigned long hpet_pie_delta; +static unsigned long hpet_pie_limit; + +/* + * Timer 1 for RTC emulation. We use one shot mode, as periodic mode + * is not supported by all HPET implementations for timer 1. + * + * hpet_rtc_timer_init() is called when the rtc is initialized. + */ +int hpet_rtc_timer_init(void) +{ + unsigned long cfg, cnt, delta, flags; + + if (!is_hpet_enabled()) + return 0; + + if (!hpet_default_delta) { + uint64_t clc; + + clc = (uint64_t) hpet_clockevent.mult * NSEC_PER_SEC; + clc >>= hpet_clockevent.shift + DEFAULT_RTC_SHIFT; + hpet_default_delta = (unsigned long) clc; + } + + if (!(hpet_rtc_flags & RTC_PIE) || hpet_pie_limit) + delta = hpet_default_delta; + else + delta = hpet_pie_delta; + + local_irq_save(flags); + + cnt = delta + hpet_readl(HPET_COUNTER); + hpet_writel(cnt, HPET_T1_CMP); + hpet_t1_cmp = cnt; + + cfg = hpet_readl(HPET_T1_CFG); + cfg &= ~HPET_TN_PERIODIC; + cfg |= HPET_TN_ENABLE | HPET_TN_32BIT; + hpet_writel(cfg, HPET_T1_CFG); + + local_irq_restore(flags); + + return 1; +} + +/* + * The functions below are called from rtc driver. + * Return 0 if HPET is not being used. + * Otherwise do the necessary changes and return 1. + */ +int hpet_mask_rtc_irq_bit(unsigned long bit_mask) +{ + if (!is_hpet_enabled()) + return 0; + + hpet_rtc_flags &= ~bit_mask; + return 1; +} + +int hpet_set_rtc_irq_bit(unsigned long bit_mask) +{ + unsigned long oldbits = hpet_rtc_flags; + + if (!is_hpet_enabled()) + return 0; + + hpet_rtc_flags |= bit_mask; + + if (!oldbits) + hpet_rtc_timer_init(); + + return 1; +} + +int hpet_set_alarm_time(unsigned char hrs, unsigned char min, + unsigned char sec) +{ + if (!is_hpet_enabled()) + return 0; + + hpet_alarm_time.tm_hour = hrs; + hpet_alarm_time.tm_min = min; + hpet_alarm_time.tm_sec = sec; + + return 1; +} + +int hpet_set_periodic_freq(unsigned long freq) +{ + uint64_t clc; + + if (!is_hpet_enabled()) + return 0; + + if (freq <= DEFAULT_RTC_INT_FREQ) + hpet_pie_limit = DEFAULT_RTC_INT_FREQ / freq; + else { + clc = (uint64_t) hpet_clockevent.mult * NSEC_PER_SEC; + do_div(clc, freq); + clc >>= hpet_clockevent.shift; + hpet_pie_delta = (unsigned long) clc; + } + return 1; +} + +int hpet_rtc_dropped_irq(void) +{ + return is_hpet_enabled(); +} + +static void hpet_rtc_timer_reinit(void) +{ + unsigned long cfg, delta; + int lost_ints = -1; + + if (unlikely(!hpet_rtc_flags)) { + cfg = hpet_readl(HPET_T1_CFG); + cfg &= ~HPET_TN_ENABLE; + hpet_writel(cfg, HPET_T1_CFG); + return; + } + + if (!(hpet_rtc_flags & RTC_PIE) || hpet_pie_limit) + delta = hpet_default_delta; + else + delta = hpet_pie_delta; + + /* + * Increment the comparator value until we are ahead of the + * current count. + */ + do { + hpet_t1_cmp += delta; + hpet_writel(hpet_t1_cmp, HPET_T1_CMP); + lost_ints++; + } while ((long)(hpet_readl(HPET_COUNTER) - hpet_t1_cmp) > 0); + + if (lost_ints) { + if (hpet_rtc_flags & RTC_PIE) + hpet_pie_count += lost_ints; + if (printk_ratelimit()) + printk(KERN_WARNING "rtc: lost %d interrupts\n", + lost_ints); + } +} + +irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id) +{ + struct rtc_time curr_time; + unsigned long rtc_int_flag = 0; + + hpet_rtc_timer_reinit(); + + if (hpet_rtc_flags & (RTC_UIE | RTC_AIE)) + rtc_get_rtc_time(&curr_time); + + if (hpet_rtc_flags & RTC_UIE && + curr_time.tm_sec != hpet_prev_update_sec) { + rtc_int_flag = RTC_UF; + hpet_prev_update_sec = curr_time.tm_sec; + } + + if (hpet_rtc_flags & RTC_PIE && + ++hpet_pie_count >= hpet_pie_limit) { + rtc_int_flag |= RTC_PF; + hpet_pie_count = 0; + } + + if (hpet_rtc_flags & RTC_PIE && + (curr_time.tm_sec == hpet_alarm_time.tm_sec) && + (curr_time.tm_min == hpet_alarm_time.tm_min) && + (curr_time.tm_hour == hpet_alarm_time.tm_hour)) + rtc_int_flag |= RTC_AF; + + if (rtc_int_flag) { + rtc_int_flag |= (RTC_IRQF | (RTC_NUM_INTS << 8)); + rtc_interrupt(rtc_int_flag, dev_id); + } + return IRQ_HANDLED; +} +#endif diff --git a/arch/i386/kernel/i8253.c b/arch/i386/kernel/i8253.c index 9a0060b92e32..a6bc7bb38834 100644 --- a/arch/i386/kernel/i8253.c +++ b/arch/i386/kernel/i8253.c @@ -2,7 +2,7 @@ * i8253.c 8253/PIT functions * */ -#include +#include #include #include #include @@ -19,17 +19,97 @@ DEFINE_SPINLOCK(i8253_lock); EXPORT_SYMBOL(i8253_lock); -void setup_pit_timer(void) +/* + * HPET replaces the PIT, when enabled. So we need to know, which of + * the two timers is used + */ +struct clock_event_device *global_clock_event; + +/* + * Initialize the PIT timer. + * + * This is also called after resume to bring the PIT into operation again. + */ +static void init_pit_timer(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + unsigned long flags; + + spin_lock_irqsave(&i8253_lock, flags); + + switch(mode) { + case CLOCK_EVT_MODE_PERIODIC: + /* binary, mode 2, LSB/MSB, ch 0 */ + outb_p(0x34, PIT_MODE); + udelay(10); + outb_p(LATCH & 0xff , PIT_CH0); /* LSB */ + udelay(10); + outb(LATCH >> 8 , PIT_CH0); /* MSB */ + break; + + case CLOCK_EVT_MODE_ONESHOT: + case CLOCK_EVT_MODE_SHUTDOWN: + case CLOCK_EVT_MODE_UNUSED: + /* One shot setup */ + outb_p(0x38, PIT_MODE); + udelay(10); + break; + } + spin_unlock_irqrestore(&i8253_lock, flags); +} + +/* + * Program the next event in oneshot mode + * + * Delta is given in PIT ticks + */ +static int pit_next_event(unsigned long delta, struct clock_event_device *evt) { unsigned long flags; spin_lock_irqsave(&i8253_lock, flags); - outb_p(0x34,PIT_MODE); /* binary, mode 2, LSB/MSB, ch 0 */ - udelay(10); - outb_p(LATCH & 0xff , PIT_CH0); /* LSB */ - udelay(10); - outb(LATCH >> 8 , PIT_CH0); /* MSB */ + outb_p(delta & 0xff , PIT_CH0); /* LSB */ + outb(delta >> 8 , PIT_CH0); /* MSB */ spin_unlock_irqrestore(&i8253_lock, flags); + + return 0; +} + +/* + * On UP the PIT can serve all of the possible timer functions. On SMP systems + * it can be solely used for the global tick. + * + * The profiling and update capabilites are switched off once the local apic is + * registered. This mechanism replaces the previous #ifdef LOCAL_APIC - + * !using_apic_timer decisions in do_timer_interrupt_hook() + */ +struct clock_event_device pit_clockevent = { + .name = "pit", + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .set_mode = init_pit_timer, + .set_next_event = pit_next_event, + .shift = 32, + .irq = 0, +}; + +/* + * Initialize the conversion factor and the min/max deltas of the clock event + * structure and register the clock event source with the framework. + */ +void __init setup_pit_timer(void) +{ + /* + * Start pit with the boot cpu mask and make it global after the + * IO_APIC has been initialized. + */ + pit_clockevent.cpumask = cpumask_of_cpu(0); + pit_clockevent.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, 32); + pit_clockevent.max_delta_ns = + clockevent_delta2ns(0x7FFF, &pit_clockevent); + pit_clockevent.min_delta_ns = + clockevent_delta2ns(0xF, &pit_clockevent); + clockevents_register_device(&pit_clockevent); + global_clock_event = &pit_clockevent; } /* @@ -46,7 +126,7 @@ static cycle_t pit_read(void) static u32 old_jifs; spin_lock_irqsave(&i8253_lock, flags); - /* + /* * Although our caller may have the read side of xtime_lock, * this is now a seqlock, and we are cheating in this routine * by having side effects on state that we cannot undo if diff --git a/arch/i386/kernel/i8259.c b/arch/i386/kernel/i8259.c index c8d45821c788..255b1af9a054 100644 --- a/arch/i386/kernel/i8259.c +++ b/arch/i386/kernel/i8259.c @@ -409,12 +409,6 @@ void __init native_init_IRQ(void) */ intr_init_hook(); - /* - * Set the clock to HZ Hz, we already have a valid - * vector now: - */ - setup_pit_timer(); - /* * External FPU? Set up irq13 if so, for * original braindamaged IBM FERR coupling. diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c index 6cdd941fc2f2..48bfcaa13ecc 100644 --- a/arch/i386/kernel/smpboot.c +++ b/arch/i386/kernel/smpboot.c @@ -287,9 +287,7 @@ static void __cpuinit smp_callin(void) /* * Save our processor parameters */ - smp_store_cpu_info(cpuid); - - disable_APIC_timer(); + smp_store_cpu_info(cpuid); /* * Allow the master to continue. @@ -408,7 +406,6 @@ static void __cpuinit start_secondary(void *unused) enable_NMI_through_LVT0(NULL); enable_8259A_irq(0); } - enable_APIC_timer(); /* * low-memory mappings have been cleared, flush them from * the local TLBs too. diff --git a/arch/i386/kernel/time.c b/arch/i386/kernel/time.c index 044c17572eef..a5350059557a 100644 --- a/arch/i386/kernel/time.c +++ b/arch/i386/kernel/time.c @@ -159,15 +159,6 @@ EXPORT_SYMBOL(profile_pc); */ irqreturn_t timer_interrupt(int irq, void *dev_id) { - /* - * Here we are in the timer irq handler. We just have irqs locally - * disabled but we don't know if the timer_bh is running on the other - * CPU. We need to avoid to SMP race with it. NOTE: we don' t need - * the irq version of write_lock because as just said we have irq - * locally disabled. -arca - */ - write_seqlock(&xtime_lock); - #ifdef CONFIG_X86_IO_APIC if (timer_ack) { /* @@ -186,7 +177,6 @@ irqreturn_t timer_interrupt(int irq, void *dev_id) do_timer_interrupt_hook(); - if (MCA_bus) { /* The PS/2 uses level-triggered interrupts. You can't turn them off, nor would you want to (any attempt to @@ -201,13 +191,6 @@ irqreturn_t timer_interrupt(int irq, void *dev_id) outb_p( irq_v|0x80, 0x61 ); /* reset the IRQ */ } - write_sequnlock(&xtime_lock); - -#ifdef CONFIG_X86_LOCAL_APIC - if (using_apic_timer) - smp_send_timer_broadcast_ipi(); -#endif - return IRQ_HANDLED; } @@ -277,63 +260,16 @@ void notify_arch_cmos_timer(void) mod_timer(&sync_cmos_timer, jiffies + 1); } -static int timer_resume(struct sys_device *dev) -{ -#ifdef CONFIG_HPET_TIMER - if (is_hpet_enabled()) - hpet_reenable(); -#endif - setup_pit_timer(); - touch_softlockup_watchdog(); - return 0; -} - -static struct sysdev_class timer_sysclass = { - .resume = timer_resume, - set_kset_name("timer"), -}; - - -/* XXX this driverfs stuff should probably go elsewhere later -john */ -static struct sys_device device_timer = { - .id = 0, - .cls = &timer_sysclass, -}; - -static int time_init_device(void) -{ - int error = sysdev_class_register(&timer_sysclass); - if (!error) - error = sysdev_register(&device_timer); - return error; -} - -device_initcall(time_init_device); - -#ifdef CONFIG_HPET_TIMER extern void (*late_time_init)(void); /* Duplicate of time_init() below, with hpet_enable part added */ static void __init hpet_time_init(void) { - if ((hpet_enable() >= 0) && hpet_use_timer) { - printk("Using HPET for base-timer\n"); - } - + if (!hpet_enable()) + setup_pit_timer(); do_time_init(); } -#endif void __init time_init(void) { -#ifdef CONFIG_HPET_TIMER - if (is_hpet_capable()) { - /* - * HPET initialization needs to do memory-mapped io. So, let - * us do a late initialization after mem_init(). - */ - late_time_init = hpet_time_init; - return; - } -#endif - do_time_init(); + late_time_init = hpet_time_init; } diff --git a/arch/i386/kernel/time_hpet.c b/arch/i386/kernel/time_hpet.c deleted file mode 100644 index 1e4702dfcd01..000000000000 --- a/arch/i386/kernel/time_hpet.c +++ /dev/null @@ -1,497 +0,0 @@ -/* - * linux/arch/i386/kernel/time_hpet.c - * This code largely copied from arch/x86_64/kernel/time.c - * See that file for credits. - * - * 2003-06-30 Venkatesh Pallipadi - Additional changes for HPET support - */ - -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include - -#include -#include - -static unsigned long hpet_period; /* fsecs / HPET clock */ -unsigned long hpet_tick; /* hpet clks count per tick */ -unsigned long hpet_address; /* hpet memory map physical address */ -int hpet_use_timer; - -static int use_hpet; /* can be used for runtime check of hpet */ -static int boot_hpet_disable; /* boottime override for HPET timer */ -static void __iomem * hpet_virt_address; /* hpet kernel virtual address */ - -#define FSEC_TO_USEC (1000000000UL) - -int hpet_readl(unsigned long a) -{ - return readl(hpet_virt_address + a); -} - -static void hpet_writel(unsigned long d, unsigned long a) -{ - writel(d, hpet_virt_address + a); -} - -#ifdef CONFIG_X86_LOCAL_APIC -/* - * HPET counters dont wrap around on every tick. They just change the - * comparator value and continue. Next tick can be caught by checking - * for a change in the comparator value. Used in apic.c. - */ -static void __devinit wait_hpet_tick(void) -{ - unsigned int start_cmp_val, end_cmp_val; - - start_cmp_val = hpet_readl(HPET_T0_CMP); - do { - end_cmp_val = hpet_readl(HPET_T0_CMP); - } while (start_cmp_val == end_cmp_val); -} -#endif - -static int hpet_timer_stop_set_go(unsigned long tick) -{ - unsigned int cfg; - - /* - * Stop the timers and reset the main counter. - */ - cfg = hpet_readl(HPET_CFG); - cfg &= ~HPET_CFG_ENABLE; - hpet_writel(cfg, HPET_CFG); - hpet_writel(0, HPET_COUNTER); - hpet_writel(0, HPET_COUNTER + 4); - - if (hpet_use_timer) { - /* - * Set up timer 0, as periodic with first interrupt to happen at - * hpet_tick, and period also hpet_tick. - */ - cfg = hpet_readl(HPET_T0_CFG); - cfg |= HPET_TN_ENABLE | HPET_TN_PERIODIC | - HPET_TN_SETVAL | HPET_TN_32BIT; - hpet_writel(cfg, HPET_T0_CFG); - - /* - * The first write after writing TN_SETVAL to the config register sets - * the counter value, the second write sets the threshold. - */ - hpet_writel(tick, HPET_T0_CMP); - hpet_writel(tick, HPET_T0_CMP); - } - /* - * Go! - */ - cfg = hpet_readl(HPET_CFG); - if (hpet_use_timer) - cfg |= HPET_CFG_LEGACY; - cfg |= HPET_CFG_ENABLE; - hpet_writel(cfg, HPET_CFG); - - return 0; -} - -/* - * Check whether HPET was found by ACPI boot parse. If yes setup HPET - * counter 0 for kernel base timer. - */ -int __init hpet_enable(void) -{ - unsigned int id; - unsigned long tick_fsec_low, tick_fsec_high; /* tick in femto sec */ - unsigned long hpet_tick_rem; - - if (boot_hpet_disable) - return -1; - - if (!hpet_address) { - return -1; - } - hpet_virt_address = ioremap_nocache(hpet_address, HPET_MMAP_SIZE); - /* - * Read the period, compute tick and quotient. - */ - id = hpet_readl(HPET_ID); - - /* - * We are checking for value '1' or more in number field if - * CONFIG_HPET_EMULATE_RTC is set because we will need an - * additional timer for RTC emulation. - * However, we can do with one timer otherwise using the - * the single HPET timer for system time. - */ -#ifdef CONFIG_HPET_EMULATE_RTC - if (!(id & HPET_ID_NUMBER)) { - iounmap(hpet_virt_address); - hpet_virt_address = NULL; - return -1; - } -#endif - - - hpet_period = hpet_readl(HPET_PERIOD); - if ((hpet_period < HPET_MIN_PERIOD) || (hpet_period > HPET_MAX_PERIOD)) { - iounmap(hpet_virt_address); - hpet_virt_address = NULL; - return -1; - } - - /* - * 64 bit math - * First changing tick into fsec - * Then 64 bit div to find number of hpet clk per tick - */ - ASM_MUL64_REG(tick_fsec_low, tick_fsec_high, - KERNEL_TICK_USEC, FSEC_TO_USEC); - ASM_DIV64_REG(hpet_tick, hpet_tick_rem, - hpet_period, tick_fsec_low, tick_fsec_high); - - if (hpet_tick_rem > (hpet_period >> 1)) - hpet_tick++; /* rounding the result */ - - hpet_use_timer = id & HPET_ID_LEGSUP; - - if (hpet_timer_stop_set_go(hpet_tick)) { - iounmap(hpet_virt_address); - hpet_virt_address = NULL; - return -1; - } - - use_hpet = 1; - -#ifdef CONFIG_HPET - { - struct hpet_data hd; - unsigned int ntimer; - - memset(&hd, 0, sizeof (hd)); - - ntimer = hpet_readl(HPET_ID); - ntimer = (ntimer & HPET_ID_NUMBER) >> HPET_ID_NUMBER_SHIFT; - ntimer++; - - /* - * Register with driver. - * Timer0 and Timer1 is used by platform. - */ - hd.hd_phys_address = hpet_address; - hd.hd_address = hpet_virt_address; - hd.hd_nirqs = ntimer; - hd.hd_flags = HPET_DATA_PLATFORM; - hpet_reserve_timer(&hd, 0); -#ifdef CONFIG_HPET_EMULATE_RTC - hpet_reserve_timer(&hd, 1); -#endif - hd.hd_irq[0] = HPET_LEGACY_8254; - hd.hd_irq[1] = HPET_LEGACY_RTC; - if (ntimer > 2) { - struct hpet __iomem *hpet; - struct hpet_timer __iomem *timer; - int i; - - hpet = hpet_virt_address; - - for (i = 2, timer = &hpet->hpet_timers[2]; i < ntimer; - timer++, i++) - hd.hd_irq[i] = (timer->hpet_config & - Tn_INT_ROUTE_CNF_MASK) >> - Tn_INT_ROUTE_CNF_SHIFT; - - } - - hpet_alloc(&hd); - } -#endif - -#ifdef CONFIG_X86_LOCAL_APIC - if (hpet_use_timer) - wait_timer_tick = wait_hpet_tick; -#endif - return 0; -} - -int hpet_reenable(void) -{ - return hpet_timer_stop_set_go(hpet_tick); -} - -int is_hpet_enabled(void) -{ - return use_hpet; -} - -int is_hpet_capable(void) -{ - if (!boot_hpet_disable && hpet_address) - return 1; - return 0; -} - -static int __init hpet_setup(char* str) -{ - if (str) { - if (!strncmp("disable", str, 7)) - boot_hpet_disable = 1; - } - return 1; -} - -__setup("hpet=", hpet_setup); - -#ifdef CONFIG_HPET_EMULATE_RTC -/* HPET in LegacyReplacement Mode eats up RTC interrupt line. When, HPET - * is enabled, we support RTC interrupt functionality in software. - * RTC has 3 kinds of interrupts: - * 1) Update Interrupt - generate an interrupt, every sec, when RTC clock - * is updated - * 2) Alarm Interrupt - generate an interrupt at a specific time of day - * 3) Periodic Interrupt - generate periodic interrupt, with frequencies - * 2Hz-8192Hz (2Hz-64Hz for non-root user) (all freqs in powers of 2) - * (1) and (2) above are implemented using polling at a frequency of - * 64 Hz. The exact frequency is a tradeoff between accuracy and interrupt - * overhead. (DEFAULT_RTC_INT_FREQ) - * For (3), we use interrupts at 64Hz or user specified periodic - * frequency, whichever is higher. - */ -#include -#include - -#define DEFAULT_RTC_INT_FREQ 64 -#define RTC_NUM_INTS 1 - -static unsigned long UIE_on; -static unsigned long prev_update_sec; - -static unsigned long AIE_on; -static struct rtc_time alarm_time; - -static unsigned long PIE_on; -static unsigned long PIE_freq = DEFAULT_RTC_INT_FREQ; -static unsigned long PIE_count; - -static unsigned long hpet_rtc_int_freq; /* RTC interrupt frequency */ -static unsigned int hpet_t1_cmp; /* cached comparator register */ - -/* - * Timer 1 for RTC, we do not use periodic interrupt feature, - * even if HPET supports periodic interrupts on Timer 1. - * The reason being, to set up a periodic interrupt in HPET, we need to - * stop the main counter. And if we do that everytime someone diables/enables - * RTC, we will have adverse effect on main kernel timer running on Timer 0. - * So, for the time being, simulate the periodic interrupt in software. - * - * hpet_rtc_timer_init() is called for the first time and during subsequent - * interuppts reinit happens through hpet_rtc_timer_reinit(). - */ -int hpet_rtc_timer_init(void) -{ - unsigned int cfg, cnt; - unsigned long flags; - - if (!is_hpet_enabled()) - return 0; - /* - * Set the counter 1 and enable the interrupts. - */ - if (PIE_on && (PIE_freq > DEFAULT_RTC_INT_FREQ)) - hpet_rtc_int_freq = PIE_freq; - else - hpet_rtc_int_freq = DEFAULT_RTC_INT_FREQ; - - local_irq_save(flags); - - cnt = hpet_readl(HPET_COUNTER); - cnt += ((hpet_tick*HZ)/hpet_rtc_int_freq); - hpet_writel(cnt, HPET_T1_CMP); - hpet_t1_cmp = cnt; - - cfg = hpet_readl(HPET_T1_CFG); - cfg &= ~HPET_TN_PERIODIC; - cfg |= HPET_TN_ENABLE | HPET_TN_32BIT; - hpet_writel(cfg, HPET_T1_CFG); - - local_irq_restore(flags); - - return 1; -} - -static void hpet_rtc_timer_reinit(void) -{ - unsigned int cfg, cnt, ticks_per_int, lost_ints; - - if (unlikely(!(PIE_on | AIE_on | UIE_on))) { - cfg = hpet_readl(HPET_T1_CFG); - cfg &= ~HPET_TN_ENABLE; - hpet_writel(cfg, HPET_T1_CFG); - return; - } - - if (PIE_on && (PIE_freq > DEFAULT_RTC_INT_FREQ)) - hpet_rtc_int_freq = PIE_freq; - else - hpet_rtc_int_freq = DEFAULT_RTC_INT_FREQ; - - /* It is more accurate to use the comparator value than current count.*/ - ticks_per_int = hpet_tick * HZ / hpet_rtc_int_freq; - hpet_t1_cmp += ticks_per_int; - hpet_writel(hpet_t1_cmp, HPET_T1_CMP); - - /* - * If the interrupt handler was delayed too long, the write above tries - * to schedule the next interrupt in the past and the hardware would - * not interrupt until the counter had wrapped around. - * So we have to check that the comparator wasn't set to a past time. - */ - cnt = hpet_readl(HPET_COUNTER); - if (unlikely((int)(cnt - hpet_t1_cmp) > 0)) { - lost_ints = (cnt - hpet_t1_cmp) / ticks_per_int + 1; - /* Make sure that, even with the time needed to execute - * this code, the next scheduled interrupt has been moved - * back to the future: */ - lost_ints++; - - hpet_t1_cmp += lost_ints * ticks_per_int; - hpet_writel(hpet_t1_cmp, HPET_T1_CMP); - - if (PIE_on) - PIE_count += lost_ints; - - printk(KERN_WARNING "rtc: lost some interrupts at %ldHz.\n", - hpet_rtc_int_freq); - } -} - -/* - * The functions below are called from rtc driver. - * Return 0 if HPET is not being used. - * Otherwise do the necessary changes and return 1. - */ -int hpet_mask_rtc_irq_bit(unsigned long bit_mask) -{ - if (!is_hpet_enabled()) - return 0; - - if (bit_mask & RTC_UIE) - UIE_on = 0; - if (bit_mask & RTC_PIE) - PIE_on = 0; - if (bit_mask & RTC_AIE) - AIE_on = 0; - - return 1; -} - -int hpet_set_rtc_irq_bit(unsigned long bit_mask) -{ - int timer_init_reqd = 0; - - if (!is_hpet_enabled()) - return 0; - - if (!(PIE_on | AIE_on | UIE_on)) - timer_init_reqd = 1; - - if (bit_mask & RTC_UIE) { - UIE_on = 1; - } - if (bit_mask & RTC_PIE) { - PIE_on = 1; - PIE_count = 0; - } - if (bit_mask & RTC_AIE) { - AIE_on = 1; - } - - if (timer_init_reqd) - hpet_rtc_timer_init(); - - return 1; -} - -int hpet_set_alarm_time(unsigned char hrs, unsigned char min, unsigned char sec) -{ - if (!is_hpet_enabled()) - return 0; - - alarm_time.tm_hour = hrs; - alarm_time.tm_min = min; - alarm_time.tm_sec = sec; - - return 1; -} - -int hpet_set_periodic_freq(unsigned long freq) -{ - if (!is_hpet_enabled()) - return 0; - - PIE_freq = freq; - PIE_count = 0; - - return 1; -} - -int hpet_rtc_dropped_irq(void) -{ - if (!is_hpet_enabled()) - return 0; - - return 1; -} - -irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id) -{ - struct rtc_time curr_time; - unsigned long rtc_int_flag = 0; - int call_rtc_interrupt = 0; - - hpet_rtc_timer_reinit(); - - if (UIE_on | AIE_on) { - rtc_get_rtc_time(&curr_time); - } - if (UIE_on) { - if (curr_time.tm_sec != prev_update_sec) { - /* Set update int info, call real rtc int routine */ - call_rtc_interrupt = 1; - rtc_int_flag = RTC_UF; - prev_update_sec = curr_time.tm_sec; - } - } - if (PIE_on) { - PIE_count++; - if (PIE_count >= hpet_rtc_int_freq/PIE_freq) { - /* Set periodic int info, call real rtc int routine */ - call_rtc_interrupt = 1; - rtc_int_flag |= RTC_PF; - PIE_count = 0; - } - } - if (AIE_on) { - if ((curr_time.tm_sec == alarm_time.tm_sec) && - (curr_time.tm_min == alarm_time.tm_min) && - (curr_time.tm_hour == alarm_time.tm_hour)) { - /* Set alarm int info, call real rtc int routine */ - call_rtc_interrupt = 1; - rtc_int_flag |= RTC_AF; - } - } - if (call_rtc_interrupt) { - rtc_int_flag |= (RTC_IRQF | (RTC_NUM_INTS << 8)); - rtc_interrupt(rtc_int_flag, dev_id); - } - return IRQ_HANDLED; -} -#endif - diff --git a/arch/i386/mach-default/setup.c b/arch/i386/mach-default/setup.c index cc2f519b2f7f..c78816210706 100644 --- a/arch/i386/mach-default/setup.c +++ b/arch/i386/mach-default/setup.c @@ -79,7 +79,12 @@ void __init trap_init_hook(void) { } -static struct irqaction irq0 = { timer_interrupt, IRQF_DISABLED, CPU_MASK_NONE, "timer", NULL, NULL}; +static struct irqaction irq0 = { + .handler = timer_interrupt, + .flags = IRQF_DISABLED | IRQF_NOBALANCING, + .mask = CPU_MASK_NONE, + .name = "timer" +}; /** * time_init_hook - do any specific initialisations for the system timer. @@ -90,6 +95,7 @@ static struct irqaction irq0 = { timer_interrupt, IRQF_DISABLED, CPU_MASK_NONE, **/ void __init time_init_hook(void) { + irq0.mask = cpumask_of_cpu(0); setup_irq(0, &irq0); } -- cgit v1.2.3 From d36b49b91065dbfa305c5a66010b3497c741eee0 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 16 Feb 2007 01:28:06 -0800 Subject: [PATCH] i386 rework local apic timer calibration The local apic timer calibration has two problem cases: 1. The calibration is based on readout of the PIT/HPET timer to detect the wrap of the periodic tick. It happens that a box gets stuck in the calibration loop due to a PIT with a broken readout function. 2. CoreDuo boxen show a sporadic PIT runs too slow defect, which results in a wrong lapic calibration. The PIT goes back to normal operation once the lapic timer is switched to periodic mode. Both are existing and unfixed problems in the current upstream kernel and prevent certain laptops and other systems from booting Linux. Rework the code to address both problems: - Make the calibration interrupt driven. This removes the wait_timer_tick magic hackery from lapic.c and time_hpet.c. The clockevents framework allows easy substitution of the global tick event handler for the calibration. This is more accurate than monitoring jiffies. At this point of the boot process, nothing disturbes the interrupt delivery, so the results are very accurate. - Verify the calibration against the PM timer, when available by using the early access function. When the measured calibration period is outside of an one percent window, then the lapic timer calibration is adjusted to the pm timer result. - Verify the calibration by running the lapic timer with the calibration handler. Disable lapic timer in case of deviation. This also removes the "synchronization" of the local apic timer to the global tick. This synchronization never worked, as there is no way to synchronize PIT(HPET) and local APIC timer. The synchronization by waiting for the tick just alignes the local APIC timer for the first events, but later the events drift away due to the different clocks. Removing the "sync" is just randomizing the asynchronous behaviour at setup time. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar Cc: Zachary Amsden Cc: "Eric W. Biederman" Cc: Rohit Seth Cc: Andi Kleen Cc: john stultz Cc: Roman Zippel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/apic.c | 365 ++++++++++++++++++++++++++++-------------------- 1 file changed, 215 insertions(+), 150 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/apic.c b/arch/i386/kernel/apic.c index e98b5c750bdf..9655c233e6f1 100644 --- a/arch/i386/kernel/apic.c +++ b/arch/i386/kernel/apic.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include @@ -59,8 +60,8 @@ */ static int enable_local_apic __initdata = 0; -/* Enable local APIC timer for highres/dyntick on UP */ -static int enable_local_apic_timer __initdata = 0; +/* Local APIC timer verification ok */ +static int local_apic_timer_verify_ok; /* * Debug level, exported for io_apic.c @@ -82,7 +83,7 @@ static void apic_pm_activate(void); static struct clock_event_device lapic_clockevent = { .name = "lapic", .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT - | CLOCK_EVT_FEAT_C3STOP, + | CLOCK_EVT_FEAT_C3STOP | CLOCK_EVT_FEAT_DUMMY, .shift = 32, .set_mode = lapic_timer_setup, .set_next_event = lapic_next_event, @@ -159,64 +160,8 @@ int lapic_get_maxlvt(void) * Local APIC timer */ -/* - * This part sets up the APIC 32 bit clock in LVTT1, with HZ interrupts - * per second. We assume that the caller has already set up the local - * APIC. - * - * The APIC timer is not exactly sync with the external timer chip, it - * closely follows bus clocks. - */ - -/* - * FIXME: Move this to i8253.h. There is no need to keep the access to - * the PIT scattered all around the place -tglx - */ - -/* - * The timer chip is already set up at HZ interrupts per second here, - * but we do not accept timer interrupts yet. We only allow the BP - * to calibrate. - */ -static unsigned int __devinit get_8254_timer_count(void) -{ - unsigned long flags; - - unsigned int count; - - spin_lock_irqsave(&i8253_lock, flags); - - outb_p(0x00, PIT_MODE); - count = inb_p(PIT_CH0); - count |= inb_p(PIT_CH0) << 8; - - spin_unlock_irqrestore(&i8253_lock, flags); - - return count; -} - -/* next tick in 8254 can be caught by catching timer wraparound */ -static void __devinit wait_8254_wraparound(void) -{ - unsigned int curr_count, prev_count; - - curr_count = get_8254_timer_count(); - do { - prev_count = curr_count; - curr_count = get_8254_timer_count(); - - /* workaround for broken Mercury/Neptune */ - if (prev_count >= curr_count + 0x100) - curr_count = get_8254_timer_count(); - - } while (prev_count >= curr_count); -} - -/* - * Default initialization for 8254 timers. If we use other timers like HPET, - * we override this later - */ -void (*wait_timer_tick)(void) __devinitdata = wait_8254_wraparound; +/* Clock divisor is set to 16 */ +#define APIC_DIVISOR 16 /* * This function sets up the local APIC timer, with a timeout of @@ -228,9 +173,6 @@ void (*wait_timer_tick)(void) __devinitdata = wait_8254_wraparound; * We do reads before writes even if unnecessary, to get around the * P5 APIC double write bug. */ - -#define APIC_DIVISOR 16 - static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen) { unsigned int lvtt_value, tmp_value; @@ -277,6 +219,10 @@ static void lapic_timer_setup(enum clock_event_mode mode, unsigned long flags; unsigned int v; + /* Lapic used for broadcast ? */ + if (!local_apic_timer_verify_ok) + return; + local_irq_save(flags); switch (mode) { @@ -321,111 +267,238 @@ static void __devinit setup_APIC_timer(void) } /* - * In this function we calibrate APIC bus clocks to the external - * timer. Unfortunately we cannot use jiffies and the timer irq - * to calibrate, since some later bootup code depends on getting - * the first irq? Ugh. + * In this functions we calibrate APIC bus clocks to the external timer. + * + * We want to do the calibration only once since we want to have local timer + * irqs syncron. CPUs connected by the same APIC bus have the very same bus + * frequency. * - * TODO: Fix this rather than saying "Ugh" -tglx + * This was previously done by reading the PIT/HPET and waiting for a wrap + * around to find out, that a tick has elapsed. I have a box, where the PIT + * readout is broken, so it never gets out of the wait loop again. This was + * also reported by others. * - * We want to do the calibration only once since we - * want to have local timer irqs syncron. CPUs connected - * by the same APIC bus have the very same bus frequency. - * And we want to have irqs off anyways, no accidental - * APIC irq that way. + * Monitoring the jiffies value is inaccurate and the clockevents + * infrastructure allows us to do a simple substitution of the interrupt + * handler. + * + * The calibration routine also uses the pm_timer when possible, as the PIT + * happens to run way too slow (factor 2.3 on my VAIO CoreDuo, which goes + * back to normal later in the boot process). */ -static int __init calibrate_APIC_clock(void) +#define LAPIC_CAL_LOOPS (HZ/10) + +static __initdata volatile int lapic_cal_loops = -1; +static __initdata long lapic_cal_t1, lapic_cal_t2; +static __initdata unsigned long long lapic_cal_tsc1, lapic_cal_tsc2; +static __initdata unsigned long lapic_cal_pm1, lapic_cal_pm2; +static __initdata unsigned long lapic_cal_j1, lapic_cal_j2; + +/* + * Temporary interrupt handler. + */ +static void __init lapic_cal_handler(struct clock_event_device *dev) +{ + unsigned long long tsc = 0; + long tapic = apic_read(APIC_TMCCT); + unsigned long pm = acpi_pm_read_early(); + + if (cpu_has_tsc) + rdtscll(tsc); + + switch (lapic_cal_loops++) { + case 0: + lapic_cal_t1 = tapic; + lapic_cal_tsc1 = tsc; + lapic_cal_pm1 = pm; + lapic_cal_j1 = jiffies; + break; + + case LAPIC_CAL_LOOPS: + lapic_cal_t2 = tapic; + lapic_cal_tsc2 = tsc; + if (pm < lapic_cal_pm1) + pm += ACPI_PM_OVRRUN; + lapic_cal_pm2 = pm; + lapic_cal_j2 = jiffies; + break; + } +} + +/* + * Setup the boot APIC + * + * Calibrate and verify the result. + */ +void __init setup_boot_APIC_clock(void) { - unsigned long long t1 = 0, t2 = 0; - long tt1, tt2; - long result; - int i; - const int LOOPS = HZ/10; + struct clock_event_device *levt = &__get_cpu_var(lapic_events); + const long pm_100ms = PMTMR_TICKS_PER_SEC/10; + const long pm_thresh = pm_100ms/100; + void (*real_handler)(struct clock_event_device *dev); + unsigned long deltaj; + long delta, deltapm; + + apic_printk(APIC_VERBOSE, "Using local APIC timer interrupts.\n" + "calibrating APIC timer ...\n"); - apic_printk(APIC_VERBOSE, "calibrating APIC timer ...\n"); + local_irq_disable(); + + /* Replace the global interrupt handler */ + real_handler = global_clock_event->event_handler; + global_clock_event->event_handler = lapic_cal_handler; /* - * Put whatever arbitrary (but long enough) timeout - * value into the APIC clock, we just want to get the - * counter running for calibration. + * Setup the APIC counter to 1e9. There is no way the lapic + * can underflow in the 100ms detection time frame */ __setup_APIC_LVTT(1000000000, 0, 0); - /* - * The timer chip counts down to zero. Let's wait - * for a wraparound to start exact measurement: - * (the current tick might have been already half done) - */ + /* Let the interrupts run */ + local_irq_enable(); - wait_timer_tick(); + while(lapic_cal_loops <= LAPIC_CAL_LOOPS); - /* - * We wrapped around just now. Let's start: - */ - if (cpu_has_tsc) - rdtscll(t1); - tt1 = apic_read(APIC_TMCCT); + local_irq_disable(); - /* - * Let's wait LOOPS wraprounds: - */ - for (i = 0; i < LOOPS; i++) - wait_timer_tick(); + /* Restore the real event handler */ + global_clock_event->event_handler = real_handler; - tt2 = apic_read(APIC_TMCCT); - if (cpu_has_tsc) - rdtscll(t2); + /* Build delta t1-t2 as apic timer counts down */ + delta = lapic_cal_t1 - lapic_cal_t2; + apic_printk(APIC_VERBOSE, "... lapic delta = %ld\n", delta); - /* - * The APIC bus clock counter is 32 bits only, it - * might have overflown, but note that we use signed - * longs, thus no extra care needed. - * - * underflown to be exact, as the timer counts down ;) - */ + /* Check, if the PM timer is available */ + deltapm = lapic_cal_pm2 - lapic_cal_pm1; + apic_printk(APIC_VERBOSE, "... PM timer delta = %ld\n", deltapm); - result = (tt1-tt2)*APIC_DIVISOR/LOOPS; + if (deltapm) { + unsigned long mult; + u64 res; + + mult = clocksource_hz2mult(PMTMR_TICKS_PER_SEC, 22); + + if (deltapm > (pm_100ms - pm_thresh) && + deltapm < (pm_100ms + pm_thresh)) { + apic_printk(APIC_VERBOSE, "... PM timer result ok\n"); + } else { + res = (((u64) deltapm) * mult) >> 22; + do_div(res, 1000000); + printk(KERN_WARNING "APIC calibration not consistent " + "with PM Timer: %ldms instead of 100ms\n", + (long)res); + /* Correct the lapic counter value */ + res = (((u64) delta ) * pm_100ms); + do_div(res, deltapm); + printk(KERN_INFO "APIC delta adjusted to PM-Timer: " + "%lu (%ld)\n", (unsigned long) res, delta); + delta = (long) res; + } + } /* Calculate the scaled math multiplication factor */ - lapic_clockevent.mult = div_sc(tt1-tt2, TICK_NSEC * LOOPS, 32); + lapic_clockevent.mult = div_sc(delta, TICK_NSEC * LAPIC_CAL_LOOPS, 32); lapic_clockevent.max_delta_ns = clockevent_delta2ns(0x7FFFFF, &lapic_clockevent); lapic_clockevent.min_delta_ns = clockevent_delta2ns(0xF, &lapic_clockevent); - apic_printk(APIC_VERBOSE, "..... tt1-tt2 %ld\n", tt1 - tt2); + calibration_result = (delta * APIC_DIVISOR) / LAPIC_CAL_LOOPS; + + apic_printk(APIC_VERBOSE, "..... delta %ld\n", delta); apic_printk(APIC_VERBOSE, "..... mult: %ld\n", lapic_clockevent.mult); - apic_printk(APIC_VERBOSE, "..... calibration result: %ld\n", result); + apic_printk(APIC_VERBOSE, "..... calibration result: %u\n", + calibration_result); - if (cpu_has_tsc) + if (cpu_has_tsc) { + delta = (long)(lapic_cal_tsc2 - lapic_cal_tsc1); apic_printk(APIC_VERBOSE, "..... CPU clock speed is " - "%ld.%04ld MHz.\n", - ((long)(t2-t1)/LOOPS)/(1000000/HZ), - ((long)(t2-t1)/LOOPS)%(1000000/HZ)); + "%ld.%04ld MHz.\n", + (delta / LAPIC_CAL_LOOPS) / (1000000 / HZ), + (delta / LAPIC_CAL_LOOPS) % (1000000 / HZ)); + } apic_printk(APIC_VERBOSE, "..... host bus clock speed is " - "%ld.%04ld MHz.\n", - result/(1000000/HZ), - result%(1000000/HZ)); - - return result; -} + "%u.%04u MHz.\n", + calibration_result / (1000000 / HZ), + calibration_result % (1000000 / HZ)); -void __init setup_boot_APIC_clock(void) -{ - unsigned long flags; - apic_printk(APIC_VERBOSE, "Using local APIC timer interrupts.\n"); - local_irq_save(flags); + apic_printk(APIC_VERBOSE, "... verify APIC timer\n"); - calibration_result = calibrate_APIC_clock(); /* - * Now set up the timer for real. + * Setup the apic timer manually */ - setup_APIC_timer(); + local_apic_timer_verify_ok = 1; + levt->event_handler = lapic_cal_handler; + lapic_timer_setup(CLOCK_EVT_MODE_PERIODIC, levt); + lapic_cal_loops = -1; + + /* Let the interrupts run */ + local_irq_enable(); + + while(lapic_cal_loops <= LAPIC_CAL_LOOPS); + + local_irq_disable(); + + /* Stop the lapic timer */ + lapic_timer_setup(CLOCK_EVT_MODE_SHUTDOWN, levt); + + local_irq_enable(); + + /* Jiffies delta */ + deltaj = lapic_cal_j2 - lapic_cal_j1; + apic_printk(APIC_VERBOSE, "... jiffies delta = %lu\n", deltaj); + + /* Check, if the PM timer is available */ + deltapm = lapic_cal_pm2 - lapic_cal_pm1; + apic_printk(APIC_VERBOSE, "... PM timer delta = %ld\n", deltapm); + + local_apic_timer_verify_ok = 0; + + if (deltapm) { + if (deltapm > (pm_100ms - pm_thresh) && + deltapm < (pm_100ms + pm_thresh)) { + apic_printk(APIC_VERBOSE, "... PM timer result ok\n"); + /* Check, if the jiffies result is consistent */ + if (deltaj < LAPIC_CAL_LOOPS-2 || + deltaj > LAPIC_CAL_LOOPS+2) { + /* + * Not sure, what we can do about this one. + * When high resultion timers are active + * and the lapic timer does not stop in C3 + * we are fine. Otherwise more trouble might + * be waiting. -- tglx + */ + printk(KERN_WARNING "Global event device %s " + "has wrong frequency " + "(%lu ticks instead of %d)\n", + global_clock_event->name, deltaj, + LAPIC_CAL_LOOPS); + } + local_apic_timer_verify_ok = 1; + } + } else { + /* Check, if the jiffies result is consistent */ + if (deltaj >= LAPIC_CAL_LOOPS-2 && + deltaj <= LAPIC_CAL_LOOPS+2) { + apic_printk(APIC_VERBOSE, "... jiffies result ok\n"); + local_apic_timer_verify_ok = 1; + } + } - local_irq_restore(flags); + if (!local_apic_timer_verify_ok) { + printk(KERN_WARNING + "APIC timer disabled due to verification failure.\n"); + /* No broadcast on UP ! */ + if (num_possible_cpus() == 1) + return; + } else + lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY; + + /* Setup the lapic or request the broadcast */ + setup_APIC_timer(); } void __devinit setup_secondary_APIC_clock(void) @@ -442,16 +515,15 @@ static void local_apic_timer_interrupt(void) struct clock_event_device *evt = &per_cpu(lapic_events, cpu); /* - * Normally we should not be here till LAPIC has been - * initialized but in some cases like kdump, its possible that - * there is a pending LAPIC timer interrupt from previous - * kernel's context and is delivered in new kernel the moment - * interrupts are enabled. + * Normally we should not be here till LAPIC has been initialized but + * in some cases like kdump, its possible that there is a pending LAPIC + * timer interrupt from previous kernel's context and is delivered in + * new kernel the moment interrupts are enabled. * - * Interrupts are enabled early and LAPIC is setup much later, - * hence its possible that when we get here evt->event_handler - * is NULL. Check for event_handler being NULL and discard - * the interrupt as spurious. + * Interrupts are enabled early and LAPIC is setup much later, hence + * its possible that when we get here evt->event_handler is NULL. + * Check for event_handler being NULL and discard the interrupt as + * spurious. */ if (!evt->event_handler) { printk(KERN_WARNING @@ -1126,13 +1198,6 @@ static int __init parse_nolapic(char *arg) } early_param("nolapic", parse_nolapic); -static int __init apic_enable_lapic_timer(char *str) -{ - enable_local_apic_timer = 1; - return 0; -} -early_param("lapictimer", apic_enable_lapic_timer); - static int __init apic_set_verbosity(char *str) { if (strcmp("debug", str) == 0) -- cgit v1.2.3 From 741673473a5b26497d5390f38d478362e27e22ad Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Fri, 16 Feb 2007 01:28:07 -0800 Subject: [PATCH] i386 prepare for dyntick Prepare i386 for dyntick: idle handler callbacks. Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner Cc: john stultz Cc: Roman Zippel Cc: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/process.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/i386/kernel/process.c b/arch/i386/kernel/process.c index 7845d480c293..bea304d48cdb 100644 --- a/arch/i386/kernel/process.c +++ b/arch/i386/kernel/process.c @@ -38,6 +38,7 @@ #include #include #include +#include #include #include @@ -211,6 +212,7 @@ void cpu_idle(void) /* endless idle loop with no priority at all */ while (1) { + tick_nohz_stop_sched_tick(); while (!need_resched()) { void (*idle)(void); @@ -238,6 +240,7 @@ void cpu_idle(void) idle(); __exit_idle(); } + tick_nohz_restart_sched_tick(); preempt_enable_no_resched(); schedule(); preempt_disable(); -- cgit v1.2.3 From f8b5035b9abd01b52ec6416f0c6bade7e603742c Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 16 Feb 2007 01:28:09 -0800 Subject: [PATCH] i386 prepare nmi watchdog for dynticks The NMI watchdog implementation assumes that the local APIC timer interrupt is happening. This assumption is not longer true when high resolution timers and dynamic ticks come into play, as they may switch off the local APIC timer completely. Take the PIT/HPET interrupts into account too, to avoid false positives. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar Cc: Andi Kleen Cc: Zachary Amsden Cc: "Eric W. Biederman" Cc: Rohit Seth Cc: john stultz Cc: Roman Zippel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/nmi.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/nmi.c b/arch/i386/kernel/nmi.c index 5d8a07c20281..821df34d2b3a 100644 --- a/arch/i386/kernel/nmi.c +++ b/arch/i386/kernel/nmi.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include @@ -973,9 +974,13 @@ __kprobes int nmi_watchdog_tick(struct pt_regs * regs, unsigned reason) cpu_clear(cpu, backtrace_mask); } - sum = per_cpu(irq_stat, cpu).apic_timer_irqs; + /* + * Take the local apic timer and PIT/HPET into account. We don't + * know which one is active, when we have highres/dyntick on + */ + sum = per_cpu(irq_stat, cpu).apic_timer_irqs + kstat_irqs(0); - /* if the apic timer isn't firing, this cpu isn't doing much */ + /* if the none of the timers isn't firing, this cpu isn't doing much */ if (!touched && last_irq_sums[cpu] == sum) { /* * Ayiee, looks like this CPU is stuck ... -- cgit v1.2.3 From d40891e75fc1f646dce57d5d3bd1349a6aaf7a0e Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Fri, 16 Feb 2007 01:28:10 -0800 Subject: [PATCH] i386: enable dynticks in kconfig Enable dynamic ticks selection. Signed-off-by: Ingo Molnar Cc: john stultz Cc: Roman Zippel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/Kconfig | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig index 490be6f77bbf..1df4a1f14289 100644 --- a/arch/i386/Kconfig +++ b/arch/i386/Kconfig @@ -86,6 +86,8 @@ source "init/Kconfig" menu "Processor type and features" +source "kernel/time/Kconfig" + config SMP bool "Symmetric multi-processing support" ---help--- -- cgit v1.2.3 From 2d0c87c3bc49c60ab5bbac401fb1ef37ff10bbe2 Mon Sep 17 00:00:00 2001 From: john stultz Date: Fri, 16 Feb 2007 01:28:18 -0800 Subject: [PATCH] time: x86_64: hpet_address cleanup In preparation for supporting generic timekeeping, this patch cleans up x86-64's use of vxtime.hpet_address, changing it to just hpet_address as is also used in i386. This is necessary since the vxtime structure will be going away. Signed-off-by: John Stultz Cc: Ingo Molnar Cc: Thomas Gleixner Cc: Andi Kleen Cc: Roman Zippel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/acpi/boot.c | 20 ++++---------------- arch/x86_64/kernel/apic.c | 3 ++- arch/x86_64/kernel/time.c | 36 +++++++++++++++++++----------------- 3 files changed, 25 insertions(+), 34 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c index 56818cf5bc40..fb3e72328a5a 100644 --- a/arch/i386/kernel/acpi/boot.c +++ b/arch/i386/kernel/acpi/boot.c @@ -616,6 +616,7 @@ static int __init acpi_parse_sbf(struct acpi_table_header *table) } #ifdef CONFIG_HPET_TIMER +#include static int __init acpi_parse_hpet(struct acpi_table_header *table) { @@ -646,24 +647,11 @@ static int __init acpi_parse_hpet(struct acpi_table_header *table) hpet_res->end = (1 * 1024) - 1; } -#ifdef CONFIG_X86_64 - vxtime.hpet_address = hpet_tbl->address.address; - + hpet_address = hpet_tbl->address.address; printk(KERN_INFO PREFIX "HPET id: %#x base: %#lx\n", - hpet_tbl->id, vxtime.hpet_address); - - res_start = vxtime.hpet_address; -#else /* X86 */ - { - extern unsigned long hpet_address; + hpet_tbl->id, hpet_address); - hpet_address = hpet_tbl->address.address; - printk(KERN_INFO PREFIX "HPET id: %#x base: %#lx\n", - hpet_tbl->id, hpet_address); - - res_start = hpet_address; - } -#endif /* X86 */ + res_start = hpet_address; if (hpet_res) { hpet_res->start = res_start; diff --git a/arch/x86_64/kernel/apic.c b/arch/x86_64/kernel/apic.c index 124b2d27b4ac..7ce779779640 100644 --- a/arch/x86_64/kernel/apic.c +++ b/arch/x86_64/kernel/apic.c @@ -37,6 +37,7 @@ #include #include #include +#include #include int apic_mapped; @@ -763,7 +764,7 @@ static void setup_APIC_timer(unsigned int clocks) local_irq_save(flags); /* wait for irq slice */ - if (vxtime.hpet_address && hpet_use_timer) { + if (hpet_address && hpet_use_timer) { int trigger = hpet_readl(HPET_T0_CMP); while (hpet_readl(HPET_COUNTER) >= trigger) /* do nothing */ ; diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c index 8cb2b2d35f5d..76857add2f51 100644 --- a/arch/x86_64/kernel/time.c +++ b/arch/x86_64/kernel/time.c @@ -67,6 +67,7 @@ static int notsc __initdata = 0; unsigned int cpu_khz; /* TSC clocks / usec, not used here */ EXPORT_SYMBOL(cpu_khz); +unsigned long hpet_address; static unsigned long hpet_period; /* fsecs / HPET clock */ unsigned long hpet_tick; /* HPET clocks / interrupt */ int hpet_use_timer; /* Use counter of hpet for time keeping, otherwise PIT */ @@ -316,7 +317,7 @@ static noinline void handle_lost_ticks(int lost) KERN_WARNING "Your time source seems to be instable or " "some driver is hogging interupts\n"); print_symbol("rip %s\n", get_irq_regs()->rip); - if (vxtime.mode == VXTIME_TSC && vxtime.hpet_address) { + if (vxtime.mode == VXTIME_TSC && hpet_address) { printk(KERN_WARNING "Falling back to HPET\n"); if (hpet_use_timer) vxtime.last = hpet_readl(HPET_T0_CMP) - @@ -324,6 +325,7 @@ static noinline void handle_lost_ticks(int lost) else vxtime.last = hpet_readl(HPET_COUNTER); vxtime.mode = VXTIME_HPET; + vxtime.hpet_address = hpet_address; do_gettimeoffset = do_gettimeoffset_hpet; } /* else should fall back to PIT, but code missing. */ @@ -354,7 +356,7 @@ void main_timer_handler(void) write_seqlock(&xtime_lock); - if (vxtime.hpet_address) + if (hpet_address) offset = hpet_readl(HPET_COUNTER); if (hpet_use_timer) { @@ -739,7 +741,7 @@ static __init int late_hpet_init(void) struct hpet_data hd; unsigned int ntimer; - if (!vxtime.hpet_address) + if (!hpet_address) return 0; memset(&hd, 0, sizeof (hd)); @@ -752,7 +754,7 @@ static __init int late_hpet_init(void) * Register with driver. * Timer0 and Timer1 is used by platform. */ - hd.hd_phys_address = vxtime.hpet_address; + hd.hd_phys_address = hpet_address; hd.hd_address = (void __iomem *)fix_to_virt(FIX_HPET_BASE); hd.hd_nirqs = ntimer; hd.hd_flags = HPET_DATA_PLATFORM; @@ -821,10 +823,10 @@ static int hpet_init(void) { unsigned int id; - if (!vxtime.hpet_address) + if (!hpet_address) return -1; - set_fixmap_nocache(FIX_HPET_BASE, vxtime.hpet_address); - __set_fixmap(VSYSCALL_HPET, vxtime.hpet_address, PAGE_KERNEL_VSYSCALL_NOCACHE); + set_fixmap_nocache(FIX_HPET_BASE, hpet_address); + __set_fixmap(VSYSCALL_HPET, hpet_address, PAGE_KERNEL_VSYSCALL_NOCACHE); /* * Read the period, compute tick and quotient. @@ -878,7 +880,7 @@ void __init pit_stop_interrupt(void) void __init stop_timer_interrupt(void) { char *name; - if (vxtime.hpet_address) { + if (hpet_address) { name = "HPET"; hpet_timer_stop_set_go(0); } else { @@ -901,8 +903,7 @@ static struct irqaction irq0 = { void __init time_init(void) { if (nohpet) - vxtime.hpet_address = 0; - + hpet_address = 0; xtime.tv_sec = get_cmos_time(); xtime.tv_nsec = 0; @@ -912,7 +913,7 @@ void __init time_init(void) if (!hpet_init()) vxtime_hz = (FSEC_PER_SEC + hpet_period / 2) / hpet_period; else - vxtime.hpet_address = 0; + hpet_address = 0; if (hpet_use_timer) { /* set tick_nsec to use the proper rate for HPET */ @@ -920,7 +921,7 @@ void __init time_init(void) cpu_khz = hpet_calibrate_tsc(); timename = "HPET"; #ifdef CONFIG_X86_PM_TIMER - } else if (pmtmr_ioport && !vxtime.hpet_address) { + } else if (pmtmr_ioport && !hpet_address) { vxtime_hz = PM_TIMER_FREQUENCY; timename = "PM"; pit_init(); @@ -990,23 +991,24 @@ void time_init_gtod(void) if (unsynchronized_tsc()) notsc = 1; - if (cpu_has(&boot_cpu_data, X86_FEATURE_RDTSCP)) + if (cpu_has(&boot_cpu_data, X86_FEATURE_RDTSCP)) vgetcpu_mode = VGETCPU_RDTSCP; else vgetcpu_mode = VGETCPU_LSL; - if (vxtime.hpet_address && notsc) { + if (hpet_address && notsc) { timetype = hpet_use_timer ? "HPET" : "PIT/HPET"; if (hpet_use_timer) vxtime.last = hpet_readl(HPET_T0_CMP) - hpet_tick; else vxtime.last = hpet_readl(HPET_COUNTER); vxtime.mode = VXTIME_HPET; + vxtime.hpet_address = hpet_address; do_gettimeoffset = do_gettimeoffset_hpet; #ifdef CONFIG_X86_PM_TIMER /* Using PM for gettimeofday is quite slow, but we have no other choice because the TSC is too unreliable on some systems. */ - } else if (pmtmr_ioport && !vxtime.hpet_address && notsc) { + } else if (pmtmr_ioport && !hpet_address && notsc) { timetype = "PM"; do_gettimeoffset = do_gettimeoffset_pm; vxtime.mode = VXTIME_PMTMR; @@ -1066,7 +1068,7 @@ static int timer_resume(struct sys_device *dev) sleep_length = 0; ctime = sleep_start; } - if (vxtime.hpet_address) + if (hpet_address) hpet_reenable(); else i8254_timer_resume(); @@ -1150,7 +1152,7 @@ static unsigned int hpet_t1_cmp; /* cached comparator register */ int is_hpet_enabled(void) { - return vxtime.hpet_address != 0; + return hpet_address != 0; } /* -- cgit v1.2.3 From c37e7bb5d2ce36ef377caabfced0b132bb1bf6a7 Mon Sep 17 00:00:00 2001 From: john stultz Date: Fri, 16 Feb 2007 01:28:19 -0800 Subject: [PATCH] time: x86_64: split x86_64/kernel/time.c up In preparation for the x86_64 generic time conversion, this patch splits out TSC and HPET related code from arch/x86_64/kernel/time.c into respective hpet.c and tsc.c files. [akpm@osdl.org: fix printk timestamps] [akpm@osdl.org: cleanup] Signed-off-by: John Stultz Cc: Ingo Molnar Cc: Thomas Gleixner Cc: Andi Kleen Cc: Roman Zippel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86_64/kernel/Makefile | 2 +- arch/x86_64/kernel/hpet.c | 453 ++++++++++++++++++++++++++++++ arch/x86_64/kernel/time.c | 664 +------------------------------------------- arch/x86_64/kernel/tsc.c | 212 ++++++++++++++ 4 files changed, 670 insertions(+), 661 deletions(-) create mode 100644 arch/x86_64/kernel/hpet.c create mode 100644 arch/x86_64/kernel/tsc.c (limited to 'arch') diff --git a/arch/x86_64/kernel/Makefile b/arch/x86_64/kernel/Makefile index 6465eee6d920..bb47e86f3d02 100644 --- a/arch/x86_64/kernel/Makefile +++ b/arch/x86_64/kernel/Makefile @@ -8,7 +8,7 @@ obj-y := process.o signal.o entry.o traps.o irq.o \ ptrace.o time.o ioport.o ldt.o setup.o i8259.o sys_x86_64.o \ x8664_ksyms.o i387.o syscall.o vsyscall.o \ setup64.o bootflag.o e820.o reboot.o quirks.o i8237.o \ - pci-dma.o pci-nommu.o alternative.o + pci-dma.o pci-nommu.o alternative.o hpet.o tsc.o obj-$(CONFIG_STACKTRACE) += stacktrace.o obj-$(CONFIG_X86_MCE) += mce.o therm_throt.o diff --git a/arch/x86_64/kernel/hpet.c b/arch/x86_64/kernel/hpet.c new file mode 100644 index 000000000000..08ab37c966c2 --- /dev/null +++ b/arch/x86_64/kernel/hpet.c @@ -0,0 +1,453 @@ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +int nohpet __initdata; + +unsigned long hpet_address; +unsigned long hpet_period; /* fsecs / HPET clock */ +unsigned long hpet_tick; /* HPET clocks / interrupt */ + +int hpet_use_timer; /* Use counter of hpet for time keeping, + * otherwise PIT + */ +unsigned int do_gettimeoffset_hpet(void) +{ + /* cap counter read to one tick to avoid inconsistencies */ + unsigned long counter = hpet_readl(HPET_COUNTER) - vxtime.last; + return (min(counter,hpet_tick) * vxtime.quot) >> US_SCALE; +} + +#ifdef CONFIG_HPET +static __init int late_hpet_init(void) +{ + struct hpet_data hd; + unsigned int ntimer; + + if (!hpet_address) + return 0; + + memset(&hd, 0, sizeof(hd)); + + ntimer = hpet_readl(HPET_ID); + ntimer = (ntimer & HPET_ID_NUMBER) >> HPET_ID_NUMBER_SHIFT; + ntimer++; + + /* + * Register with driver. + * Timer0 and Timer1 is used by platform. + */ + hd.hd_phys_address = hpet_address; + hd.hd_address = (void __iomem *)fix_to_virt(FIX_HPET_BASE); + hd.hd_nirqs = ntimer; + hd.hd_flags = HPET_DATA_PLATFORM; + hpet_reserve_timer(&hd, 0); +#ifdef CONFIG_HPET_EMULATE_RTC + hpet_reserve_timer(&hd, 1); +#endif + hd.hd_irq[0] = HPET_LEGACY_8254; + hd.hd_irq[1] = HPET_LEGACY_RTC; + if (ntimer > 2) { + struct hpet *hpet; + struct hpet_timer *timer; + int i; + + hpet = (struct hpet *) fix_to_virt(FIX_HPET_BASE); + timer = &hpet->hpet_timers[2]; + for (i = 2; i < ntimer; timer++, i++) + hd.hd_irq[i] = (timer->hpet_config & + Tn_INT_ROUTE_CNF_MASK) >> + Tn_INT_ROUTE_CNF_SHIFT; + + } + + hpet_alloc(&hd); + return 0; +} +fs_initcall(late_hpet_init); +#endif + +int hpet_timer_stop_set_go(unsigned long tick) +{ + unsigned int cfg; + +/* + * Stop the timers and reset the main counter. + */ + + cfg = hpet_readl(HPET_CFG); + cfg &= ~(HPET_CFG_ENABLE | HPET_CFG_LEGACY); + hpet_writel(cfg, HPET_CFG); + hpet_writel(0, HPET_COUNTER); + hpet_writel(0, HPET_COUNTER + 4); + +/* + * Set up timer 0, as periodic with first interrupt to happen at hpet_tick, + * and period also hpet_tick. + */ + if (hpet_use_timer) { + hpet_writel(HPET_TN_ENABLE | HPET_TN_PERIODIC | HPET_TN_SETVAL | + HPET_TN_32BIT, HPET_T0_CFG); + hpet_writel(hpet_tick, HPET_T0_CMP); /* next interrupt */ + hpet_writel(hpet_tick, HPET_T0_CMP); /* period */ + cfg |= HPET_CFG_LEGACY; + } +/* + * Go! + */ + + cfg |= HPET_CFG_ENABLE; + hpet_writel(cfg, HPET_CFG); + + return 0; +} + +int hpet_arch_init(void) +{ + unsigned int id; + + if (!hpet_address) + return -1; + set_fixmap_nocache(FIX_HPET_BASE, hpet_address); + __set_fixmap(VSYSCALL_HPET, hpet_address, PAGE_KERNEL_VSYSCALL_NOCACHE); + +/* + * Read the period, compute tick and quotient. + */ + + id = hpet_readl(HPET_ID); + + if (!(id & HPET_ID_VENDOR) || !(id & HPET_ID_NUMBER)) + return -1; + + hpet_period = hpet_readl(HPET_PERIOD); + if (hpet_period < 100000 || hpet_period > 100000000) + return -1; + + hpet_tick = (FSEC_PER_TICK + hpet_period / 2) / hpet_period; + + hpet_use_timer = (id & HPET_ID_LEGSUP); + + return hpet_timer_stop_set_go(hpet_tick); +} + +int hpet_reenable(void) +{ + return hpet_timer_stop_set_go(hpet_tick); +} + +/* + * calibrate_tsc() calibrates the processor TSC in a very simple way, comparing + * it to the HPET timer of known frequency. + */ + +#define TICK_COUNT 100000000 +#define TICK_MIN 5000 + +/* + * Some platforms take periodic SMI interrupts with 5ms duration. Make sure none + * occurs between the reads of the hpet & TSC. + */ +static void __init read_hpet_tsc(int *hpet, int *tsc) +{ + int tsc1, tsc2, hpet1; + + do { + tsc1 = get_cycles_sync(); + hpet1 = hpet_readl(HPET_COUNTER); + tsc2 = get_cycles_sync(); + } while (tsc2 - tsc1 > TICK_MIN); + *hpet = hpet1; + *tsc = tsc2; +} + +unsigned int __init hpet_calibrate_tsc(void) +{ + int tsc_start, hpet_start; + int tsc_now, hpet_now; + unsigned long flags; + + local_irq_save(flags); + + read_hpet_tsc(&hpet_start, &tsc_start); + + do { + local_irq_disable(); + read_hpet_tsc(&hpet_now, &tsc_now); + local_irq_restore(flags); + } while ((tsc_now - tsc_start) < TICK_COUNT && + (hpet_now - hpet_start) < TICK_COUNT); + + return (tsc_now - tsc_start) * 1000000000L + / ((hpet_now - hpet_start) * hpet_period / 1000); +} + +#ifdef CONFIG_HPET_EMULATE_RTC +/* HPET in LegacyReplacement Mode eats up RTC interrupt line. When, HPET + * is enabled, we support RTC interrupt functionality in software. + * RTC has 3 kinds of interrupts: + * 1) Update Interrupt - generate an interrupt, every sec, when RTC clock + * is updated + * 2) Alarm Interrupt - generate an interrupt at a specific time of day + * 3) Periodic Interrupt - generate periodic interrupt, with frequencies + * 2Hz-8192Hz (2Hz-64Hz for non-root user) (all freqs in powers of 2) + * (1) and (2) above are implemented using polling at a frequency of + * 64 Hz. The exact frequency is a tradeoff between accuracy and interrupt + * overhead. (DEFAULT_RTC_INT_FREQ) + * For (3), we use interrupts at 64Hz or user specified periodic + * frequency, whichever is higher. + */ +#include + +#define DEFAULT_RTC_INT_FREQ 64 +#define RTC_NUM_INTS 1 + +static unsigned long UIE_on; +static unsigned long prev_update_sec; + +static unsigned long AIE_on; +static struct rtc_time alarm_time; + +static unsigned long PIE_on; +static unsigned long PIE_freq = DEFAULT_RTC_INT_FREQ; +static unsigned long PIE_count; + +static unsigned long hpet_rtc_int_freq; /* RTC interrupt frequency */ +static unsigned int hpet_t1_cmp; /* cached comparator register */ + +int is_hpet_enabled(void) +{ + return hpet_address != 0; +} + +/* + * Timer 1 for RTC, we do not use periodic interrupt feature, + * even if HPET supports periodic interrupts on Timer 1. + * The reason being, to set up a periodic interrupt in HPET, we need to + * stop the main counter. And if we do that everytime someone diables/enables + * RTC, we will have adverse effect on main kernel timer running on Timer 0. + * So, for the time being, simulate the periodic interrupt in software. + * + * hpet_rtc_timer_init() is called for the first time and during subsequent + * interuppts reinit happens through hpet_rtc_timer_reinit(). + */ +int hpet_rtc_timer_init(void) +{ + unsigned int cfg, cnt; + unsigned long flags; + + if (!is_hpet_enabled()) + return 0; + /* + * Set the counter 1 and enable the interrupts. + */ + if (PIE_on && (PIE_freq > DEFAULT_RTC_INT_FREQ)) + hpet_rtc_int_freq = PIE_freq; + else + hpet_rtc_int_freq = DEFAULT_RTC_INT_FREQ; + + local_irq_save(flags); + + cnt = hpet_readl(HPET_COUNTER); + cnt += ((hpet_tick*HZ)/hpet_rtc_int_freq); + hpet_writel(cnt, HPET_T1_CMP); + hpet_t1_cmp = cnt; + + cfg = hpet_readl(HPET_T1_CFG); + cfg &= ~HPET_TN_PERIODIC; + cfg |= HPET_TN_ENABLE | HPET_TN_32BIT; + hpet_writel(cfg, HPET_T1_CFG); + + local_irq_restore(flags); + + return 1; +} + +static void hpet_rtc_timer_reinit(void) +{ + unsigned int cfg, cnt, ticks_per_int, lost_ints; + + if (unlikely(!(PIE_on | AIE_on | UIE_on))) { + cfg = hpet_readl(HPET_T1_CFG); + cfg &= ~HPET_TN_ENABLE; + hpet_writel(cfg, HPET_T1_CFG); + return; + } + + if (PIE_on && (PIE_freq > DEFAULT_RTC_INT_FREQ)) + hpet_rtc_int_freq = PIE_freq; + else + hpet_rtc_int_freq = DEFAULT_RTC_INT_FREQ; + + /* It is more accurate to use the comparator value than current count.*/ + ticks_per_int = hpet_tick * HZ / hpet_rtc_int_freq; + hpet_t1_cmp += ticks_per_int; + hpet_writel(hpet_t1_cmp, HPET_T1_CMP); + + /* + * If the interrupt handler was delayed too long, the write above tries + * to schedule the next interrupt in the past and the hardware would + * not interrupt until the counter had wrapped around. + * So we have to check that the comparator wasn't set to a past time. + */ + cnt = hpet_readl(HPET_COUNTER); + if (unlikely((int)(cnt - hpet_t1_cmp) > 0)) { + lost_ints = (cnt - hpet_t1_cmp) / ticks_per_int + 1; + /* Make sure that, even with the time needed to execute + * this code, the next scheduled interrupt has been moved + * back to the future: */ + lost_ints++; + + hpet_t1_cmp += lost_ints * ticks_per_int; + hpet_writel(hpet_t1_cmp, HPET_T1_CMP); + + if (PIE_on) + PIE_count += lost_ints; + + if (printk_ratelimit()) + printk(KERN_WARNING "rtc: lost some interrupts at %ldHz.\n", + hpet_rtc_int_freq); + } +} + +/* + * The functions below are called from rtc driver. + * Return 0 if HPET is not being used. + * Otherwise do the necessary changes and return 1. + */ +int hpet_mask_rtc_irq_bit(unsigned long bit_mask) +{ + if (!is_hpet_enabled()) + return 0; + + if (bit_mask & RTC_UIE) + UIE_on = 0; + if (bit_mask & RTC_PIE) + PIE_on = 0; + if (bit_mask & RTC_AIE) + AIE_on = 0; + + return 1; +} + +int hpet_set_rtc_irq_bit(unsigned long bit_mask) +{ + int timer_init_reqd = 0; + + if (!is_hpet_enabled()) + return 0; + + if (!(PIE_on | AIE_on | UIE_on)) + timer_init_reqd = 1; + + if (bit_mask & RTC_UIE) { + UIE_on = 1; + } + if (bit_mask & RTC_PIE) { + PIE_on = 1; + PIE_count = 0; + } + if (bit_mask & RTC_AIE) { + AIE_on = 1; + } + + if (timer_init_reqd) + hpet_rtc_timer_init(); + + return 1; +} + +int hpet_set_alarm_time(unsigned char hrs, unsigned char min, unsigned char sec) +{ + if (!is_hpet_enabled()) + return 0; + + alarm_time.tm_hour = hrs; + alarm_time.tm_min = min; + alarm_time.tm_sec = sec; + + return 1; +} + +int hpet_set_periodic_freq(unsigned long freq) +{ + if (!is_hpet_enabled()) + return 0; + + PIE_freq = freq; + PIE_count = 0; + + return 1; +} + +int hpet_rtc_dropped_irq(void) +{ + if (!is_hpet_enabled()) + return 0; + + return 1; +} + +irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + struct rtc_time curr_time; + unsigned long rtc_int_flag = 0; + int call_rtc_interrupt = 0; + + hpet_rtc_timer_reinit(); + + if (UIE_on | AIE_on) { + rtc_get_rtc_time(&curr_time); + } + if (UIE_on) { + if (curr_time.tm_sec != prev_update_sec) { + /* Set update int info, call real rtc int routine */ + call_rtc_interrupt = 1; + rtc_int_flag = RTC_UF; + prev_update_sec = curr_time.tm_sec; + } + } + if (PIE_on) { + PIE_count++; + if (PIE_count >= hpet_rtc_int_freq/PIE_freq) { + /* Set periodic int info, call real rtc int routine */ + call_rtc_interrupt = 1; + rtc_int_flag |= RTC_PF; + PIE_count = 0; + } + } + if (AIE_on) { + if ((curr_time.tm_sec == alarm_time.tm_sec) && + (curr_time.tm_min == alarm_time.tm_min) && + (curr_time.tm_hour == alarm_time.tm_hour)) { + /* Set alarm int info, call real rtc int routine */ + call_rtc_interrupt = 1; + rtc_int_flag |= RTC_AF; + } + } + if (call_rtc_interrupt) { + rtc_int_flag |= (RTC_IRQF | (RTC_NUM_INTS << 8)); + rtc_interrupt(rtc_int_flag, dev_id); + } + return IRQ_HANDLED; +} +#endif + +static int __init nohpet_setup(char *s) +{ + nohpet = 1; + return 1; +} + +__setup("nohpet", nohpet_setup); + diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c index 76857add2f51..216fc9d74247 100644 --- a/arch/x86_64/kernel/time.c +++ b/arch/x86_64/kernel/time.c @@ -42,9 +42,10 @@ #include #include #include +#include #ifdef CONFIG_CPU_FREQ -static void cpufreq_delayed_get(void); +extern void cpufreq_delayed_get(void); #endif extern void i8254_timer_resume(void); extern int using_apic_timer; @@ -55,22 +56,6 @@ DEFINE_SPINLOCK(rtc_lock); EXPORT_SYMBOL(rtc_lock); DEFINE_SPINLOCK(i8253_lock); -int nohpet __initdata = 0; -static int notsc __initdata = 0; - -#define USEC_PER_TICK (USEC_PER_SEC / HZ) -#define NSEC_PER_TICK (NSEC_PER_SEC / HZ) -#define FSEC_PER_TICK (FSEC_PER_SEC / HZ) - -#define NS_SCALE 10 /* 2^10, carefully chosen */ -#define US_SCALE 32 /* 2^32, arbitralrily chosen */ - -unsigned int cpu_khz; /* TSC clocks / usec, not used here */ -EXPORT_SYMBOL(cpu_khz); -unsigned long hpet_address; -static unsigned long hpet_period; /* fsecs / HPET clock */ -unsigned long hpet_tick; /* HPET clocks / interrupt */ -int hpet_use_timer; /* Use counter of hpet for time keeping, otherwise PIT */ unsigned long vxtime_hz = PIT_TICK_RATE; int report_lost_ticks; /* command line option */ unsigned long long monotonic_base; @@ -81,34 +66,6 @@ volatile unsigned long __jiffies __section_jiffies = INITIAL_JIFFIES; struct timespec __xtime __section_xtime; struct timezone __sys_tz __section_sys_tz; -/* - * do_gettimeoffset() returns microseconds since last timer interrupt was - * triggered by hardware. A memory read of HPET is slower than a register read - * of TSC, but much more reliable. It's also synchronized to the timer - * interrupt. Note that do_gettimeoffset() may return more than hpet_tick, if a - * timer interrupt has happened already, but vxtime.trigger wasn't updated yet. - * This is not a problem, because jiffies hasn't updated either. They are bound - * together by xtime_lock. - */ - -static inline unsigned int do_gettimeoffset_tsc(void) -{ - unsigned long t; - unsigned long x; - t = get_cycles_sync(); - if (t < vxtime.last_tsc) - t = vxtime.last_tsc; /* hack */ - x = ((t - vxtime.last_tsc) * vxtime.tsc_quot) >> US_SCALE; - return x; -} - -static inline unsigned int do_gettimeoffset_hpet(void) -{ - /* cap counter read to one tick to avoid inconsistencies */ - unsigned long counter = hpet_readl(HPET_COUNTER) - vxtime.last; - return (min(counter,hpet_tick) * vxtime.quot) >> US_SCALE; -} - unsigned int (*do_gettimeoffset)(void) = do_gettimeoffset_tsc; /* @@ -272,7 +229,7 @@ static void set_rtc_mmss(unsigned long nowtime) * Note: This function is required to return accurate * time even in the absence of multiple timer ticks. */ -static inline unsigned long long cycles_2_ns(unsigned long long cyc); +extern unsigned long long cycles_2_ns(unsigned long long cyc); unsigned long long monotonic_clock(void) { unsigned long seq; @@ -462,40 +419,6 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } -static unsigned int cyc2ns_scale __read_mostly; - -static inline void set_cyc2ns_scale(unsigned long cpu_khz) -{ - cyc2ns_scale = (NSEC_PER_MSEC << NS_SCALE) / cpu_khz; -} - -static inline unsigned long long cycles_2_ns(unsigned long long cyc) -{ - return (cyc * cyc2ns_scale) >> NS_SCALE; -} - -unsigned long long sched_clock(void) -{ - unsigned long a = 0; - -#if 0 - /* Don't do a HPET read here. Using TSC always is much faster - and HPET may not be mapped yet when the scheduler first runs. - Disadvantage is a small drift between CPUs in some configurations, - but that should be tolerable. */ - if (__vxtime.mode == VXTIME_HPET) - return (hpet_readl(HPET_COUNTER) * vxtime.quot) >> US_SCALE; -#endif - - /* Could do CPU core sync here. Opteron can execute rdtsc speculatively, - which means it is not completely exact and may not be monotonous between - CPUs. But the errors should be too small to matter for scheduling - purposes. */ - - rdtscll(a); - return cycles_2_ns(a); -} - static unsigned long get_cmos_time(void) { unsigned int year, mon, day, hour, min, sec; @@ -547,164 +470,6 @@ static unsigned long get_cmos_time(void) return mktime(year, mon, day, hour, min, sec); } -#ifdef CONFIG_CPU_FREQ - -/* Frequency scaling support. Adjust the TSC based timer when the cpu frequency - changes. - - RED-PEN: On SMP we assume all CPUs run with the same frequency. It's - not that important because current Opteron setups do not support - scaling on SMP anyroads. - - Should fix up last_tsc too. Currently gettimeofday in the - first tick after the change will be slightly wrong. */ - -#include - -static unsigned int cpufreq_delayed_issched = 0; -static unsigned int cpufreq_init = 0; -static struct work_struct cpufreq_delayed_get_work; - -static void handle_cpufreq_delayed_get(struct work_struct *v) -{ - unsigned int cpu; - for_each_online_cpu(cpu) { - cpufreq_get(cpu); - } - cpufreq_delayed_issched = 0; -} - -/* if we notice lost ticks, schedule a call to cpufreq_get() as it tries - * to verify the CPU frequency the timing core thinks the CPU is running - * at is still correct. - */ -static void cpufreq_delayed_get(void) -{ - static int warned; - if (cpufreq_init && !cpufreq_delayed_issched) { - cpufreq_delayed_issched = 1; - if (!warned) { - warned = 1; - printk(KERN_DEBUG - "Losing some ticks... checking if CPU frequency changed.\n"); - } - schedule_work(&cpufreq_delayed_get_work); - } -} - -static unsigned int ref_freq = 0; -static unsigned long loops_per_jiffy_ref = 0; - -static unsigned long cpu_khz_ref = 0; - -static int time_cpufreq_notifier(struct notifier_block *nb, unsigned long val, - void *data) -{ - struct cpufreq_freqs *freq = data; - unsigned long *lpj, dummy; - - if (cpu_has(&cpu_data[freq->cpu], X86_FEATURE_CONSTANT_TSC)) - return 0; - - lpj = &dummy; - if (!(freq->flags & CPUFREQ_CONST_LOOPS)) -#ifdef CONFIG_SMP - lpj = &cpu_data[freq->cpu].loops_per_jiffy; -#else - lpj = &boot_cpu_data.loops_per_jiffy; -#endif - - if (!ref_freq) { - ref_freq = freq->old; - loops_per_jiffy_ref = *lpj; - cpu_khz_ref = cpu_khz; - } - if ((val == CPUFREQ_PRECHANGE && freq->old < freq->new) || - (val == CPUFREQ_POSTCHANGE && freq->old > freq->new) || - (val == CPUFREQ_RESUMECHANGE)) { - *lpj = - cpufreq_scale(loops_per_jiffy_ref, ref_freq, freq->new); - - cpu_khz = cpufreq_scale(cpu_khz_ref, ref_freq, freq->new); - if (!(freq->flags & CPUFREQ_CONST_LOOPS)) - vxtime.tsc_quot = (USEC_PER_MSEC << US_SCALE) / cpu_khz; - } - - set_cyc2ns_scale(cpu_khz_ref); - - return 0; -} - -static struct notifier_block time_cpufreq_notifier_block = { - .notifier_call = time_cpufreq_notifier -}; - -static int __init cpufreq_tsc(void) -{ - INIT_WORK(&cpufreq_delayed_get_work, handle_cpufreq_delayed_get); - if (!cpufreq_register_notifier(&time_cpufreq_notifier_block, - CPUFREQ_TRANSITION_NOTIFIER)) - cpufreq_init = 1; - return 0; -} - -core_initcall(cpufreq_tsc); - -#endif - -/* - * calibrate_tsc() calibrates the processor TSC in a very simple way, comparing - * it to the HPET timer of known frequency. - */ - -#define TICK_COUNT 100000000 -#define TICK_MIN 5000 -#define MAX_READ_RETRIES 5 - -/* - * Some platforms take periodic SMI interrupts with 5ms duration. Make sure none - * occurs between the reads of the hpet & TSC. - */ -static void __init read_hpet_tsc(int *hpet, int *tsc) -{ - int tsc1, tsc2, hpet1, retries = 0; - static int msg; - - do { - tsc1 = get_cycles_sync(); - hpet1 = hpet_readl(HPET_COUNTER); - tsc2 = get_cycles_sync(); - } while (tsc2 - tsc1 > TICK_MIN && retries++ < MAX_READ_RETRIES); - if (retries >= MAX_READ_RETRIES && !msg++) - printk(KERN_WARNING - "hpet.c: exceeded max retries to read HPET & TSC\n"); - *hpet = hpet1; - *tsc = tsc2; -} - - -static unsigned int __init hpet_calibrate_tsc(void) -{ - int tsc_start, hpet_start; - int tsc_now, hpet_now; - unsigned long flags; - - local_irq_save(flags); - local_irq_disable(); - - read_hpet_tsc(&hpet_start, &tsc_start); - - do { - local_irq_disable(); - read_hpet_tsc(&hpet_now, &tsc_now); - local_irq_restore(flags); - } while ((tsc_now - tsc_start) < TICK_COUNT && - (hpet_now - hpet_start) < TICK_COUNT); - - return (tsc_now - tsc_start) * 1000000000L - / ((hpet_now - hpet_start) * hpet_period / 1000); -} - /* * pit_calibrate_tsc() uses the speaker output (channel 2) of @@ -735,124 +500,6 @@ static unsigned int __init pit_calibrate_tsc(void) return (end - start) / 50; } -#ifdef CONFIG_HPET -static __init int late_hpet_init(void) -{ - struct hpet_data hd; - unsigned int ntimer; - - if (!hpet_address) - return 0; - - memset(&hd, 0, sizeof (hd)); - - ntimer = hpet_readl(HPET_ID); - ntimer = (ntimer & HPET_ID_NUMBER) >> HPET_ID_NUMBER_SHIFT; - ntimer++; - - /* - * Register with driver. - * Timer0 and Timer1 is used by platform. - */ - hd.hd_phys_address = hpet_address; - hd.hd_address = (void __iomem *)fix_to_virt(FIX_HPET_BASE); - hd.hd_nirqs = ntimer; - hd.hd_flags = HPET_DATA_PLATFORM; - hpet_reserve_timer(&hd, 0); -#ifdef CONFIG_HPET_EMULATE_RTC - hpet_reserve_timer(&hd, 1); -#endif - hd.hd_irq[0] = HPET_LEGACY_8254; - hd.hd_irq[1] = HPET_LEGACY_RTC; - if (ntimer > 2) { - struct hpet *hpet; - struct hpet_timer *timer; - int i; - - hpet = (struct hpet *) fix_to_virt(FIX_HPET_BASE); - timer = &hpet->hpet_timers[2]; - for (i = 2; i < ntimer; timer++, i++) - hd.hd_irq[i] = (timer->hpet_config & - Tn_INT_ROUTE_CNF_MASK) >> - Tn_INT_ROUTE_CNF_SHIFT; - - } - - hpet_alloc(&hd); - return 0; -} -fs_initcall(late_hpet_init); -#endif - -static int hpet_timer_stop_set_go(unsigned long tick) -{ - unsigned int cfg; - -/* - * Stop the timers and reset the main counter. - */ - - cfg = hpet_readl(HPET_CFG); - cfg &= ~(HPET_CFG_ENABLE | HPET_CFG_LEGACY); - hpet_writel(cfg, HPET_CFG); - hpet_writel(0, HPET_COUNTER); - hpet_writel(0, HPET_COUNTER + 4); - -/* - * Set up timer 0, as periodic with first interrupt to happen at hpet_tick, - * and period also hpet_tick. - */ - if (hpet_use_timer) { - hpet_writel(HPET_TN_ENABLE | HPET_TN_PERIODIC | HPET_TN_SETVAL | - HPET_TN_32BIT, HPET_T0_CFG); - hpet_writel(hpet_tick, HPET_T0_CMP); /* next interrupt */ - hpet_writel(hpet_tick, HPET_T0_CMP); /* period */ - cfg |= HPET_CFG_LEGACY; - } -/* - * Go! - */ - - cfg |= HPET_CFG_ENABLE; - hpet_writel(cfg, HPET_CFG); - - return 0; -} - -static int hpet_init(void) -{ - unsigned int id; - - if (!hpet_address) - return -1; - set_fixmap_nocache(FIX_HPET_BASE, hpet_address); - __set_fixmap(VSYSCALL_HPET, hpet_address, PAGE_KERNEL_VSYSCALL_NOCACHE); - -/* - * Read the period, compute tick and quotient. - */ - - id = hpet_readl(HPET_ID); - - if (!(id & HPET_ID_VENDOR) || !(id & HPET_ID_NUMBER)) - return -1; - - hpet_period = hpet_readl(HPET_PERIOD); - if (hpet_period < 100000 || hpet_period > 100000000) - return -1; - - hpet_tick = (FSEC_PER_TICK + hpet_period / 2) / hpet_period; - - hpet_use_timer = (id & HPET_ID_LEGSUP); - - return hpet_timer_stop_set_go(hpet_tick); -} - -static int hpet_reenable(void) -{ - return hpet_timer_stop_set_go(hpet_tick); -} - #define PIT_MODE 0x43 #define PIT_CH0 0x40 @@ -910,7 +557,7 @@ void __init time_init(void) set_normalized_timespec(&wall_to_monotonic, -xtime.tv_sec, -xtime.tv_nsec); - if (!hpet_init()) + if (!hpet_arch_init()) vxtime_hz = (FSEC_PER_SEC + hpet_period / 2) / hpet_period; else hpet_address = 0; @@ -945,42 +592,6 @@ void __init time_init(void) #endif } -static int tsc_unstable = 0; - -void mark_tsc_unstable(void) -{ - tsc_unstable = 1; -} -EXPORT_SYMBOL_GPL(mark_tsc_unstable); - -/* - * Make an educated guess if the TSC is trustworthy and synchronized - * over all CPUs. - */ -__cpuinit int unsynchronized_tsc(void) -{ - if (tsc_unstable) - return 1; - -#ifdef CONFIG_SMP - if (apic_is_clustered_box()) - return 1; -#endif - /* Most intel systems have synchronized TSCs except for - multi node systems */ - if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) { -#ifdef CONFIG_ACPI - /* But TSC doesn't tick in C3 so don't use it there */ - if (acpi_gbl_FADT.header.length > 0 && acpi_gbl_FADT.C3latency < 1000) - return 1; -#endif - return 0; - } - - /* Assume multi socket systems are not synchronized */ - return num_present_cpus() > 1; -} - /* * Decide what mode gettimeofday should use. */ @@ -1116,270 +727,3 @@ static int time_init_device(void) } device_initcall(time_init_device); - -#ifdef CONFIG_HPET_EMULATE_RTC -/* HPET in LegacyReplacement Mode eats up RTC interrupt line. When, HPET - * is enabled, we support RTC interrupt functionality in software. - * RTC has 3 kinds of interrupts: - * 1) Update Interrupt - generate an interrupt, every sec, when RTC clock - * is updated - * 2) Alarm Interrupt - generate an interrupt at a specific time of day - * 3) Periodic Interrupt - generate periodic interrupt, with frequencies - * 2Hz-8192Hz (2Hz-64Hz for non-root user) (all freqs in powers of 2) - * (1) and (2) above are implemented using polling at a frequency of - * 64 Hz. The exact frequency is a tradeoff between accuracy and interrupt - * overhead. (DEFAULT_RTC_INT_FREQ) - * For (3), we use interrupts at 64Hz or user specified periodic - * frequency, whichever is higher. - */ -#include - -#define DEFAULT_RTC_INT_FREQ 64 -#define RTC_NUM_INTS 1 - -static unsigned long UIE_on; -static unsigned long prev_update_sec; - -static unsigned long AIE_on; -static struct rtc_time alarm_time; - -static unsigned long PIE_on; -static unsigned long PIE_freq = DEFAULT_RTC_INT_FREQ; -static unsigned long PIE_count; - -static unsigned long hpet_rtc_int_freq; /* RTC interrupt frequency */ -static unsigned int hpet_t1_cmp; /* cached comparator register */ - -int is_hpet_enabled(void) -{ - return hpet_address != 0; -} - -/* - * Timer 1 for RTC, we do not use periodic interrupt feature, - * even if HPET supports periodic interrupts on Timer 1. - * The reason being, to set up a periodic interrupt in HPET, we need to - * stop the main counter. And if we do that everytime someone diables/enables - * RTC, we will have adverse effect on main kernel timer running on Timer 0. - * So, for the time being, simulate the periodic interrupt in software. - * - * hpet_rtc_timer_init() is called for the first time and during subsequent - * interuppts reinit happens through hpet_rtc_timer_reinit(). - */ -int hpet_rtc_timer_init(void) -{ - unsigned int cfg, cnt; - unsigned long flags; - - if (!is_hpet_enabled()) - return 0; - /* - * Set the counter 1 and enable the interrupts. - */ - if (PIE_on && (PIE_freq > DEFAULT_RTC_INT_FREQ)) - hpet_rtc_int_freq = PIE_freq; - else - hpet_rtc_int_freq = DEFAULT_RTC_INT_FREQ; - - local_irq_save(flags); - - cnt = hpet_readl(HPET_COUNTER); - cnt += ((hpet_tick*HZ)/hpet_rtc_int_freq); - hpet_writel(cnt, HPET_T1_CMP); - hpet_t1_cmp = cnt; - - cfg = hpet_readl(HPET_T1_CFG); - cfg &= ~HPET_TN_PERIODIC; - cfg |= HPET_TN_ENABLE | HPET_TN_32BIT; - hpet_writel(cfg, HPET_T1_CFG); - - local_irq_restore(flags); - - return 1; -} - -static void hpet_rtc_timer_reinit(void) -{ - unsigned int cfg, cnt, ticks_per_int, lost_ints; - - if (unlikely(!(PIE_on | AIE_on | UIE_on))) { - cfg = hpet_readl(HPET_T1_CFG); - cfg &= ~HPET_TN_ENABLE; - hpet_writel(cfg, HPET_T1_CFG); - return; - } - - if (PIE_on && (PIE_freq > DEFAULT_RTC_INT_FREQ)) - hpet_rtc_int_freq = PIE_freq; - else - hpet_rtc_int_freq = DEFAULT_RTC_INT_FREQ; - - /* It is more accurate to use the comparator value than current count.*/ - ticks_per_int = hpet_tick * HZ / hpet_rtc_int_freq; - hpet_t1_cmp += ticks_per_int; - hpet_writel(hpet_t1_cmp, HPET_T1_CMP); - - /* - * If the interrupt handler was delayed too long, the write above tries - * to schedule the next interrupt in the past and the hardware would - * not interrupt until the counter had wrapped around. - * So we have to check that the comparator wasn't set to a past time. - */ - cnt = hpet_readl(HPET_COUNTER); - if (unlikely((int)(cnt - hpet_t1_cmp) > 0)) { - lost_ints = (cnt - hpet_t1_cmp) / ticks_per_int + 1; - /* Make sure that, even with the time needed to execute - * this code, the next scheduled interrupt has been moved - * back to the future: */ - lost_ints++; - - hpet_t1_cmp += lost_ints * ticks_per_int; - hpet_writel(hpet_t1_cmp, HPET_T1_CMP); - - if (PIE_on) - PIE_count += lost_ints; - - if (printk_ratelimit()) - printk(KERN_WARNING "rtc: lost some interrupts at %ldHz.\n", - hpet_rtc_int_freq); - } -} - -/* - * The functions below are called from rtc driver. - * Return 0 if HPET is not being used. - * Otherwise do the necessary changes and return 1. - */ -int hpet_mask_rtc_irq_bit(unsigned long bit_mask) -{ - if (!is_hpet_enabled()) - return 0; - - if (bit_mask & RTC_UIE) - UIE_on = 0; - if (bit_mask & RTC_PIE) - PIE_on = 0; - if (bit_mask & RTC_AIE) - AIE_on = 0; - - return 1; -} - -int hpet_set_rtc_irq_bit(unsigned long bit_mask) -{ - int timer_init_reqd = 0; - - if (!is_hpet_enabled()) - return 0; - - if (!(PIE_on | AIE_on | UIE_on)) - timer_init_reqd = 1; - - if (bit_mask & RTC_UIE) { - UIE_on = 1; - } - if (bit_mask & RTC_PIE) { - PIE_on = 1; - PIE_count = 0; - } - if (bit_mask & RTC_AIE) { - AIE_on = 1; - } - - if (timer_init_reqd) - hpet_rtc_timer_init(); - - return 1; -} - -int hpet_set_alarm_time(unsigned char hrs, unsigned char min, unsigned char sec) -{ - if (!is_hpet_enabled()) - return 0; - - alarm_time.tm_hour = hrs; - alarm_time.tm_min = min; - alarm_time.tm_sec = sec; - - return 1; -} - -int hpet_set_periodic_freq(unsigned long freq) -{ - if (!is_hpet_enabled()) - return 0; - - PIE_freq = freq; - PIE_count = 0; - - return 1; -} - -int hpet_rtc_dropped_irq(void) -{ - if (!is_hpet_enabled()) - return 0; - - return 1; -} - -irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id, struct pt_regs *regs) -{ - struct rtc_time curr_time; - unsigned long rtc_int_flag = 0; - int call_rtc_interrupt = 0; - - hpet_rtc_timer_reinit(); - - if (UIE_on | AIE_on) { - rtc_get_rtc_time(&curr_time); - } - if (UIE_on) { - if (curr_time.tm_sec != prev_update_sec) { - /* Set update int info, call real rtc int routine */ - call_rtc_interrupt = 1; - rtc_int_flag = RTC_UF; - prev_update_sec = curr_time.tm_sec; - } - } - if (PIE_on) { - PIE_count++; - if (PIE_count >= hpet_rtc_int_freq/PIE_freq) { - /* Set periodic int info, call real rtc int routine */ - call_rtc_interrupt = 1; - rtc_int_flag |= RTC_PF; - PIE_count = 0; - } - } - if (AIE_on) { - if ((curr_time.tm_sec == alarm_time.tm_sec) && - (curr_time.tm_min == alarm_time.tm_min) && - (curr_time.tm_hour == alarm_time.tm_hour)) { - /* Set alarm int info, call real rtc int routine */ - call_rtc_interrupt = 1; - rtc_int_flag |= RTC_AF; - } - } - if (call_rtc_interrupt) { - rtc_int_flag |= (RTC_IRQF | (RTC_NUM_INTS << 8)); - rtc_interrupt(rtc_int_flag, dev_id); - } - return IRQ_HANDLED; -} -#endif - -static int __init nohpet_setup(char *s) -{ - nohpet = 1; - return 1; -} - -__setup("nohpet", nohpet_setup); - -int __init notsc_setup(char *s) -{ - notsc = 1; - return 1; -} - -__setup("notsc", notsc_setup); diff --git a/arch/x86_64/kernel/tsc.c b/arch/x86_64/kernel/tsc.c new file mode 100644 index 000000000000..2dbac15ab1f0 --- /dev/null +++ b/arch/x86_64/kernel/tsc.c @@ -0,0 +1,212 @@ +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +int notsc __initdata = 0; + +unsigned int cpu_khz; /* TSC clocks / usec, not used here */ +EXPORT_SYMBOL(cpu_khz); + +/* + * do_gettimeoffset() returns microseconds since last timer interrupt was + * triggered by hardware. A memory read of HPET is slower than a register read + * of TSC, but much more reliable. It's also synchronized to the timer + * interrupt. Note that do_gettimeoffset() may return more than hpet_tick, if a + * timer interrupt has happened already, but vxtime.trigger wasn't updated yet. + * This is not a problem, because jiffies hasn't updated either. They are bound + * together by xtime_lock. + */ + +unsigned int do_gettimeoffset_tsc(void) +{ + unsigned long t; + unsigned long x; + t = get_cycles_sync(); + if (t < vxtime.last_tsc) + t = vxtime.last_tsc; /* hack */ + x = ((t - vxtime.last_tsc) * vxtime.tsc_quot) >> US_SCALE; + return x; +} + +static unsigned int cyc2ns_scale __read_mostly; + +void set_cyc2ns_scale(unsigned long khz) +{ + cyc2ns_scale = (NSEC_PER_MSEC << NS_SCALE) / khz; +} + +unsigned long long cycles_2_ns(unsigned long long cyc) +{ + return (cyc * cyc2ns_scale) >> NS_SCALE; +} + +unsigned long long sched_clock(void) +{ + unsigned long a = 0; + + /* Could do CPU core sync here. Opteron can execute rdtsc speculatively, + * which means it is not completely exact and may not be monotonous + * between CPUs. But the errors should be too small to matter for + * scheduling purposes. + */ + + rdtscll(a); + return cycles_2_ns(a); +} + +#ifdef CONFIG_CPU_FREQ + +/* Frequency scaling support. Adjust the TSC based timer when the cpu frequency + * changes. + * + * RED-PEN: On SMP we assume all CPUs run with the same frequency. It's + * not that important because current Opteron setups do not support + * scaling on SMP anyroads. + * + * Should fix up last_tsc too. Currently gettimeofday in the + * first tick after the change will be slightly wrong. + */ + +#include + +static unsigned int cpufreq_delayed_issched = 0; +static unsigned int cpufreq_init = 0; +static struct work_struct cpufreq_delayed_get_work; + +static void handle_cpufreq_delayed_get(struct work_struct *v) +{ + unsigned int cpu; + for_each_online_cpu(cpu) { + cpufreq_get(cpu); + } + cpufreq_delayed_issched = 0; +} + +/* if we notice lost ticks, schedule a call to cpufreq_get() as it tries + * to verify the CPU frequency the timing core thinks the CPU is running + * at is still correct. + */ +void cpufreq_delayed_get(void) +{ + static int warned; + if (cpufreq_init && !cpufreq_delayed_issched) { + cpufreq_delayed_issched = 1; + if (!warned) { + warned = 1; + printk(KERN_DEBUG "Losing some ticks... " + "checking if CPU frequency changed.\n"); + } + schedule_work(&cpufreq_delayed_get_work); + } +} + +static unsigned int ref_freq = 0; +static unsigned long loops_per_jiffy_ref = 0; + +static unsigned long cpu_khz_ref = 0; + +static int time_cpufreq_notifier(struct notifier_block *nb, unsigned long val, + void *data) +{ + struct cpufreq_freqs *freq = data; + unsigned long *lpj, dummy; + + if (cpu_has(&cpu_data[freq->cpu], X86_FEATURE_CONSTANT_TSC)) + return 0; + + lpj = &dummy; + if (!(freq->flags & CPUFREQ_CONST_LOOPS)) +#ifdef CONFIG_SMP + lpj = &cpu_data[freq->cpu].loops_per_jiffy; +#else + lpj = &boot_cpu_data.loops_per_jiffy; +#endif + + if (!ref_freq) { + ref_freq = freq->old; + loops_per_jiffy_ref = *lpj; + cpu_khz_ref = cpu_khz; + } + if ((val == CPUFREQ_PRECHANGE && freq->old < freq->new) || + (val == CPUFREQ_POSTCHANGE && freq->old > freq->new) || + (val == CPUFREQ_RESUMECHANGE)) { + *lpj = + cpufreq_scale(loops_per_jiffy_ref, ref_freq, freq->new); + + cpu_khz = cpufreq_scale(cpu_khz_ref, ref_freq, freq->new); + if (!(freq->flags & CPUFREQ_CONST_LOOPS)) + vxtime.tsc_quot = (USEC_PER_MSEC << US_SCALE) / cpu_khz; + } + + set_cyc2ns_scale(cpu_khz_ref); + + return 0; +} + +static struct notifier_block time_cpufreq_notifier_block = { + .notifier_call = time_cpufreq_notifier +}; + +static int __init cpufreq_tsc(void) +{ + INIT_WORK(&cpufreq_delayed_get_work, handle_cpufreq_delayed_get); + if (!cpufreq_register_notifier(&time_cpufreq_notifier_block, + CPUFREQ_TRANSITION_NOTIFIER)) + cpufreq_init = 1; + return 0; +} + +core_initcall(cpufreq_tsc); + +#endif + +static int tsc_unstable = 0; + +void mark_tsc_unstable(void) +{ + tsc_unstable = 1; +} +EXPORT_SYMBOL_GPL(mark_tsc_unstable); + +/* + * Make an educated guess if the TSC is trustworthy and synchronized + * over all CPUs. + */ +__cpuinit int unsynchronized_tsc(void) +{ + if (tsc_unstable) + return 1; + +#ifdef CONFIG_SMP + if (apic_is_clustered_box()) + return 1; +#endif + /* Most intel systems have synchronized TSCs except for + multi node systems */ + if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) { +#ifdef CONFIG_ACPI + /* But TSC doesn't tick in C3 so don't use it there */ + if (acpi_gbl_FADT.header.length > 0 && acpi_gbl_FADT.C3latency < 1000) + return 1; +#endif + return 0; + } + + /* Assume multi socket systems are not synchronized */ + return num_present_cpus() > 1; +} + +int __init notsc_setup(char *s) +{ + notsc = 1; + return 1; +} + +__setup("notsc", notsc_setup); -- cgit v1.2.3 From 1489939f0ab64b96998e04068c516c39afe29654 Mon Sep 17 00:00:00 2001 From: john stultz Date: Fri, 16 Feb 2007 01:28:20 -0800 Subject: [PATCH] time: x86_64: convert x86_64 to use GENERIC_TIME This patch converts x86_64 to use the GENERIC_TIME infrastructure and adds clocksource structures for both TSC and HPET (ACPI PM is shared w/ i386). [akpm@osdl.org: fix printk timestamps] [akpm@osdl.org: fix printk ckeanups] [akpm@osdl.org: hpet build fix] Signed-off-by: John Stultz Cc: Ingo Molnar Cc: Thomas Gleixner Cc: Andi Kleen Cc: Roman Zippel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86_64/Kconfig | 4 + arch/x86_64/kernel/apic.c | 2 +- arch/x86_64/kernel/hpet.c | 64 ++++++++- arch/x86_64/kernel/pmtimer.c | 58 --------- arch/x86_64/kernel/smpboot.c | 1 - arch/x86_64/kernel/time.c | 300 +------------------------------------------ arch/x86_64/kernel/tsc.c | 103 ++++++++------- 7 files changed, 124 insertions(+), 408 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig index 7982cbc3bc94..286b4606fb1e 100644 --- a/arch/x86_64/Kconfig +++ b/arch/x86_64/Kconfig @@ -24,6 +24,10 @@ config X86 bool default y +config GENERIC_TIME + bool + default y + config ZONE_DMA32 bool default y diff --git a/arch/x86_64/kernel/apic.c b/arch/x86_64/kernel/apic.c index 7ce779779640..723417d924c0 100644 --- a/arch/x86_64/kernel/apic.c +++ b/arch/x86_64/kernel/apic.c @@ -786,7 +786,7 @@ static void setup_APIC_timer(unsigned int clocks) /* Turn off PIT interrupt if we use APIC timer as main timer. Only works with the PM timer right now TBD fix it for HPET too. */ - if (vxtime.mode == VXTIME_PMTMR && + if ((pmtmr_ioport != 0) && smp_processor_id() == boot_cpu_id && apic_runs_main_timer == 1 && !cpu_isset(boot_cpu_id, timer_interrupt_broadcast_ipi_mask)) { diff --git a/arch/x86_64/kernel/hpet.c b/arch/x86_64/kernel/hpet.c index 08ab37c966c2..c23738899ae9 100644 --- a/arch/x86_64/kernel/hpet.c +++ b/arch/x86_64/kernel/hpet.c @@ -21,12 +21,6 @@ unsigned long hpet_tick; /* HPET clocks / interrupt */ int hpet_use_timer; /* Use counter of hpet for time keeping, * otherwise PIT */ -unsigned int do_gettimeoffset_hpet(void) -{ - /* cap counter read to one tick to avoid inconsistencies */ - unsigned long counter = hpet_readl(HPET_COUNTER) - vxtime.last; - return (min(counter,hpet_tick) * vxtime.quot) >> US_SCALE; -} #ifdef CONFIG_HPET static __init int late_hpet_init(void) @@ -451,3 +445,61 @@ static int __init nohpet_setup(char *s) __setup("nohpet", nohpet_setup); +#define HPET_MASK 0xFFFFFFFF +#define HPET_SHIFT 22 + +/* FSEC = 10^-15 NSEC = 10^-9 */ +#define FSEC_PER_NSEC 1000000 + +static void *hpet_ptr; + +static cycle_t read_hpet(void) +{ + return (cycle_t)readl(hpet_ptr); +} + +struct clocksource clocksource_hpet = { + .name = "hpet", + .rating = 250, + .read = read_hpet, + .mask = (cycle_t)HPET_MASK, + .mult = 0, /* set below */ + .shift = HPET_SHIFT, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static int __init init_hpet_clocksource(void) +{ + unsigned long hpet_period; + void __iomem *hpet_base; + u64 tmp; + + if (!hpet_address) + return -ENODEV; + + /* calculate the hpet address: */ + hpet_base = ioremap_nocache(hpet_address, HPET_MMAP_SIZE); + hpet_ptr = hpet_base + HPET_COUNTER; + + /* calculate the frequency: */ + hpet_period = readl(hpet_base + HPET_PERIOD); + + /* + * hpet period is in femto seconds per cycle + * so we need to convert this to ns/cyc units + * aproximated by mult/2^shift + * + * fsec/cyc * 1nsec/1000000fsec = nsec/cyc = mult/2^shift + * fsec/cyc * 1ns/1000000fsec * 2^shift = mult + * fsec/cyc * 2^shift * 1nsec/1000000fsec = mult + * (fsec/cyc << shift)/1000000 = mult + * (hpet_period << shift)/FSEC_PER_NSEC = mult + */ + tmp = (u64)hpet_period << HPET_SHIFT; + do_div(tmp, FSEC_PER_NSEC); + clocksource_hpet.mult = (u32)tmp; + + return clocksource_register(&clocksource_hpet); +} + +module_init(init_hpet_clocksource); diff --git a/arch/x86_64/kernel/pmtimer.c b/arch/x86_64/kernel/pmtimer.c index 7554458dc9cb..ae8f91214f15 100644 --- a/arch/x86_64/kernel/pmtimer.c +++ b/arch/x86_64/kernel/pmtimer.c @@ -24,15 +24,6 @@ #include #include -/* The I/O port the PMTMR resides at. - * The location is detected during setup_arch(), - * in arch/i386/kernel/acpi/boot.c */ -u32 pmtmr_ioport __read_mostly; - -/* value of the Power timer at last timer interrupt */ -static u32 offset_delay; -static u32 last_pmtmr_tick; - #define ACPI_PM_MASK 0xFFFFFF /* limit it to 24 bits */ static inline u32 cyc2us(u32 cycles) @@ -48,38 +39,6 @@ static inline u32 cyc2us(u32 cycles) return (cycles >> 10); } -int pmtimer_mark_offset(void) -{ - static int first_run = 1; - unsigned long tsc; - u32 lost; - - u32 tick = inl(pmtmr_ioport); - u32 delta; - - delta = cyc2us((tick - last_pmtmr_tick) & ACPI_PM_MASK); - - last_pmtmr_tick = tick; - monotonic_base += delta * NSEC_PER_USEC; - - delta += offset_delay; - - lost = delta / (USEC_PER_SEC / HZ); - offset_delay = delta % (USEC_PER_SEC / HZ); - - rdtscll(tsc); - vxtime.last_tsc = tsc - offset_delay * (u64)cpu_khz / 1000; - - /* don't calculate delay for first run, - or if we've got less then a tick */ - if (first_run || (lost < 1)) { - first_run = 0; - offset_delay = 0; - } - - return lost - 1; -} - static unsigned pmtimer_wait_tick(void) { u32 a, b; @@ -101,23 +60,6 @@ void pmtimer_wait(unsigned us) } while (cyc2us(b - a) < us); } -void pmtimer_resume(void) -{ - last_pmtmr_tick = inl(pmtmr_ioport); -} - -unsigned int do_gettimeoffset_pm(void) -{ - u32 now, offset, delta = 0; - - offset = last_pmtmr_tick; - now = inl(pmtmr_ioport); - delta = (now - offset) & ACPI_PM_MASK; - - return offset_delay + cyc2us(delta); -} - - static int __init nopmtimer_setup(char *s) { pmtmr_ioport = 0; diff --git a/arch/x86_64/kernel/smpboot.c b/arch/x86_64/kernel/smpboot.c index 62d828433c30..35443729aad8 100644 --- a/arch/x86_64/kernel/smpboot.c +++ b/arch/x86_64/kernel/smpboot.c @@ -982,7 +982,6 @@ void __init smp_cpus_done(unsigned int max_cpus) smp_cleanup_boot(); setup_ioapic_dest(); check_nmi_watchdog(); - time_init_gtod(); } #ifdef CONFIG_HOTPLUG_CPU diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c index 216fc9d74247..d84208e3c618 100644 --- a/arch/x86_64/kernel/time.c +++ b/arch/x86_64/kernel/time.c @@ -44,9 +44,6 @@ #include #include -#ifdef CONFIG_CPU_FREQ -extern void cpufreq_delayed_get(void); -#endif extern void i8254_timer_resume(void); extern int using_apic_timer; @@ -57,8 +54,6 @@ EXPORT_SYMBOL(rtc_lock); DEFINE_SPINLOCK(i8253_lock); unsigned long vxtime_hz = PIT_TICK_RATE; -int report_lost_ticks; /* command line option */ -unsigned long long monotonic_base; struct vxtime_data __vxtime __section_vxtime; /* for vsyscalls */ @@ -66,76 +61,6 @@ volatile unsigned long __jiffies __section_jiffies = INITIAL_JIFFIES; struct timespec __xtime __section_xtime; struct timezone __sys_tz __section_sys_tz; -unsigned int (*do_gettimeoffset)(void) = do_gettimeoffset_tsc; - -/* - * This version of gettimeofday() has microsecond resolution and better than - * microsecond precision, as we're using at least a 10 MHz (usually 14.31818 - * MHz) HPET timer. - */ - -void do_gettimeofday(struct timeval *tv) -{ - unsigned long seq; - unsigned int sec, usec; - - do { - seq = read_seqbegin(&xtime_lock); - - sec = xtime.tv_sec; - usec = xtime.tv_nsec / NSEC_PER_USEC; - - /* i386 does some correction here to keep the clock - monotonous even when ntpd is fixing drift. - But they didn't work for me, there is a non monotonic - clock anyways with ntp. - I dropped all corrections now until a real solution can - be found. Note when you fix it here you need to do the same - in arch/x86_64/kernel/vsyscall.c and export all needed - variables in vmlinux.lds. -AK */ - usec += do_gettimeoffset(); - - } while (read_seqretry(&xtime_lock, seq)); - - tv->tv_sec = sec + usec / USEC_PER_SEC; - tv->tv_usec = usec % USEC_PER_SEC; -} - -EXPORT_SYMBOL(do_gettimeofday); - -/* - * settimeofday() first undoes the correction that gettimeofday would do - * on the time, and then saves it. This is ugly, but has been like this for - * ages already. - */ - -int do_settimeofday(struct timespec *tv) -{ - time_t wtm_sec, sec = tv->tv_sec; - long wtm_nsec, nsec = tv->tv_nsec; - - if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC) - return -EINVAL; - - write_seqlock_irq(&xtime_lock); - - nsec -= do_gettimeoffset() * NSEC_PER_USEC; - - wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec); - wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec); - - set_normalized_timespec(&xtime, sec, nsec); - set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - - ntp_clear(); - - write_sequnlock_irq(&xtime_lock); - clock_was_set(); - return 0; -} - -EXPORT_SYMBOL(do_settimeofday); - unsigned long profile_pc(struct pt_regs *regs) { unsigned long pc = instruction_pointer(regs); @@ -225,85 +150,9 @@ static void set_rtc_mmss(unsigned long nowtime) } -/* monotonic_clock(): returns # of nanoseconds passed since time_init() - * Note: This function is required to return accurate - * time even in the absence of multiple timer ticks. - */ -extern unsigned long long cycles_2_ns(unsigned long long cyc); -unsigned long long monotonic_clock(void) -{ - unsigned long seq; - u32 last_offset, this_offset, offset; - unsigned long long base; - - if (vxtime.mode == VXTIME_HPET) { - do { - seq = read_seqbegin(&xtime_lock); - - last_offset = vxtime.last; - base = monotonic_base; - this_offset = hpet_readl(HPET_COUNTER); - } while (read_seqretry(&xtime_lock, seq)); - offset = (this_offset - last_offset); - offset *= NSEC_PER_TICK / hpet_tick; - } else { - do { - seq = read_seqbegin(&xtime_lock); - - last_offset = vxtime.last_tsc; - base = monotonic_base; - } while (read_seqretry(&xtime_lock, seq)); - this_offset = get_cycles_sync(); - offset = cycles_2_ns(this_offset - last_offset); - } - return base + offset; -} -EXPORT_SYMBOL(monotonic_clock); - -static noinline void handle_lost_ticks(int lost) -{ - static long lost_count; - static int warned; - if (report_lost_ticks) { - printk(KERN_WARNING "time.c: Lost %d timer tick(s)! ", lost); - print_symbol("rip %s)\n", get_irq_regs()->rip); - } - - if (lost_count == 1000 && !warned) { - printk(KERN_WARNING "warning: many lost ticks.\n" - KERN_WARNING "Your time source seems to be instable or " - "some driver is hogging interupts\n"); - print_symbol("rip %s\n", get_irq_regs()->rip); - if (vxtime.mode == VXTIME_TSC && hpet_address) { - printk(KERN_WARNING "Falling back to HPET\n"); - if (hpet_use_timer) - vxtime.last = hpet_readl(HPET_T0_CMP) - - hpet_tick; - else - vxtime.last = hpet_readl(HPET_COUNTER); - vxtime.mode = VXTIME_HPET; - vxtime.hpet_address = hpet_address; - do_gettimeoffset = do_gettimeoffset_hpet; - } - /* else should fall back to PIT, but code missing. */ - warned = 1; - } else - lost_count++; - -#ifdef CONFIG_CPU_FREQ - /* In some cases the CPU can change frequency without us noticing - Give cpufreq a change to catch up. */ - if ((lost_count+1) % 25 == 0) - cpufreq_delayed_get(); -#endif -} - void main_timer_handler(void) { static unsigned long rtc_update = 0; - unsigned long tsc; - int delay = 0, offset = 0, lost = 0; - /* * Here we are in the timer irq handler. We have irqs locally disabled (so we * don't need spin_lock_irqsave()) but we don't know if the timer_bh is running @@ -313,72 +162,11 @@ void main_timer_handler(void) write_seqlock(&xtime_lock); - if (hpet_address) - offset = hpet_readl(HPET_COUNTER); - - if (hpet_use_timer) { - /* if we're using the hpet timer functionality, - * we can more accurately know the counter value - * when the timer interrupt occured. - */ - offset = hpet_readl(HPET_T0_CMP) - hpet_tick; - delay = hpet_readl(HPET_COUNTER) - offset; - } else if (!pmtmr_ioport) { - spin_lock(&i8253_lock); - outb_p(0x00, 0x43); - delay = inb_p(0x40); - delay |= inb(0x40) << 8; - spin_unlock(&i8253_lock); - delay = LATCH - 1 - delay; - } - - tsc = get_cycles_sync(); - - if (vxtime.mode == VXTIME_HPET) { - if (offset - vxtime.last > hpet_tick) { - lost = (offset - vxtime.last) / hpet_tick - 1; - } - - monotonic_base += - (offset - vxtime.last) * NSEC_PER_TICK / hpet_tick; - - vxtime.last = offset; -#ifdef CONFIG_X86_PM_TIMER - } else if (vxtime.mode == VXTIME_PMTMR) { - lost = pmtimer_mark_offset(); -#endif - } else { - offset = (((tsc - vxtime.last_tsc) * - vxtime.tsc_quot) >> US_SCALE) - USEC_PER_TICK; - - if (offset < 0) - offset = 0; - - if (offset > USEC_PER_TICK) { - lost = offset / USEC_PER_TICK; - offset %= USEC_PER_TICK; - } - - monotonic_base += cycles_2_ns(tsc - vxtime.last_tsc); - - vxtime.last_tsc = tsc - vxtime.quot * delay / vxtime.tsc_quot; - - if ((((tsc - vxtime.last_tsc) * - vxtime.tsc_quot) >> US_SCALE) < offset) - vxtime.last_tsc = tsc - - (((long) offset << US_SCALE) / vxtime.tsc_quot) - 1; - } - - if (lost > 0) - handle_lost_ticks(lost); - else - lost = 0; - /* * Do the timer stuff. */ - do_timer(lost + 1); + do_timer(1); #ifndef CONFIG_SMP update_process_times(user_mode(get_irq_regs())); #endif @@ -537,12 +325,6 @@ void __init stop_timer_interrupt(void) printk(KERN_INFO "timer: %s interrupt stopped.\n", name); } -int __init time_setup(char *str) -{ - report_lost_ticks = 1; - return 1; -} - static struct irqaction irq0 = { timer_interrupt, IRQF_DISABLED, CPU_MASK_NONE, "timer", NULL, NULL }; @@ -557,9 +339,7 @@ void __init time_init(void) set_normalized_timespec(&wall_to_monotonic, -xtime.tv_sec, -xtime.tv_nsec); - if (!hpet_arch_init()) - vxtime_hz = (FSEC_PER_SEC + hpet_period / 2) / hpet_period; - else + if (hpet_arch_init()) hpet_address = 0; if (hpet_use_timer) { @@ -567,82 +347,26 @@ void __init time_init(void) tick_nsec = TICK_NSEC_HPET; cpu_khz = hpet_calibrate_tsc(); timename = "HPET"; -#ifdef CONFIG_X86_PM_TIMER - } else if (pmtmr_ioport && !hpet_address) { - vxtime_hz = PM_TIMER_FREQUENCY; - timename = "PM"; - pit_init(); - cpu_khz = pit_calibrate_tsc(); -#endif } else { pit_init(); cpu_khz = pit_calibrate_tsc(); timename = "PIT"; } - vxtime.mode = VXTIME_TSC; - vxtime.quot = (USEC_PER_SEC << US_SCALE) / vxtime_hz; - vxtime.tsc_quot = (USEC_PER_MSEC << US_SCALE) / cpu_khz; - vxtime.last_tsc = get_cycles_sync(); - set_cyc2ns_scale(cpu_khz); - setup_irq(0, &irq0); - -#ifndef CONFIG_SMP - time_init_gtod(); -#endif -} - -/* - * Decide what mode gettimeofday should use. - */ -void time_init_gtod(void) -{ - char *timetype; - if (unsynchronized_tsc()) - notsc = 1; + mark_tsc_unstable(); if (cpu_has(&boot_cpu_data, X86_FEATURE_RDTSCP)) vgetcpu_mode = VGETCPU_RDTSCP; else vgetcpu_mode = VGETCPU_LSL; - if (hpet_address && notsc) { - timetype = hpet_use_timer ? "HPET" : "PIT/HPET"; - if (hpet_use_timer) - vxtime.last = hpet_readl(HPET_T0_CMP) - hpet_tick; - else - vxtime.last = hpet_readl(HPET_COUNTER); - vxtime.mode = VXTIME_HPET; - vxtime.hpet_address = hpet_address; - do_gettimeoffset = do_gettimeoffset_hpet; -#ifdef CONFIG_X86_PM_TIMER - /* Using PM for gettimeofday is quite slow, but we have no other - choice because the TSC is too unreliable on some systems. */ - } else if (pmtmr_ioport && !hpet_address && notsc) { - timetype = "PM"; - do_gettimeoffset = do_gettimeoffset_pm; - vxtime.mode = VXTIME_PMTMR; - sysctl_vsyscall = 0; - printk(KERN_INFO "Disabling vsyscall due to use of PM timer\n"); -#endif - } else { - timetype = hpet_use_timer ? "HPET/TSC" : "PIT/TSC"; - vxtime.mode = VXTIME_TSC; - } - - printk(KERN_INFO "time.c: Using %ld.%06ld MHz WALL %s GTOD %s timer.\n", - vxtime_hz / 1000000, vxtime_hz % 1000000, timename, timetype); + set_cyc2ns_scale(cpu_khz); printk(KERN_INFO "time.c: Detected %d.%03d MHz processor.\n", cpu_khz / 1000, cpu_khz % 1000); - vxtime.quot = (USEC_PER_SEC << US_SCALE) / vxtime_hz; - vxtime.tsc_quot = (USEC_PER_MSEC << US_SCALE) / cpu_khz; - vxtime.last_tsc = get_cycles_sync(); - - set_cyc2ns_scale(cpu_khz); + setup_irq(0, &irq0); } -__setup("report_lost_ticks", time_setup); static long clock_cmos_diff; static unsigned long sleep_start; @@ -688,20 +412,8 @@ static int timer_resume(struct sys_device *dev) write_seqlock_irqsave(&xtime_lock,flags); xtime.tv_sec = sec; xtime.tv_nsec = 0; - if (vxtime.mode == VXTIME_HPET) { - if (hpet_use_timer) - vxtime.last = hpet_readl(HPET_T0_CMP) - hpet_tick; - else - vxtime.last = hpet_readl(HPET_COUNTER); -#ifdef CONFIG_X86_PM_TIMER - } else if (vxtime.mode == VXTIME_PMTMR) { - pmtimer_resume(); -#endif - } else - vxtime.last_tsc = get_cycles_sync(); - write_sequnlock_irqrestore(&xtime_lock,flags); jiffies += sleep_length; - monotonic_base += sleep_length * (NSEC_PER_SEC/HZ); + write_sequnlock_irqrestore(&xtime_lock,flags); touch_softlockup_watchdog(); return 0; } diff --git a/arch/x86_64/kernel/tsc.c b/arch/x86_64/kernel/tsc.c index 2dbac15ab1f0..8c92f2fe7e2e 100644 --- a/arch/x86_64/kernel/tsc.c +++ b/arch/x86_64/kernel/tsc.c @@ -9,32 +9,11 @@ #include -int notsc __initdata = 0; +static int notsc __initdata = 0; unsigned int cpu_khz; /* TSC clocks / usec, not used here */ EXPORT_SYMBOL(cpu_khz); -/* - * do_gettimeoffset() returns microseconds since last timer interrupt was - * triggered by hardware. A memory read of HPET is slower than a register read - * of TSC, but much more reliable. It's also synchronized to the timer - * interrupt. Note that do_gettimeoffset() may return more than hpet_tick, if a - * timer interrupt has happened already, but vxtime.trigger wasn't updated yet. - * This is not a problem, because jiffies hasn't updated either. They are bound - * together by xtime_lock. - */ - -unsigned int do_gettimeoffset_tsc(void) -{ - unsigned long t; - unsigned long x; - t = get_cycles_sync(); - if (t < vxtime.last_tsc) - t = vxtime.last_tsc; /* hack */ - x = ((t - vxtime.last_tsc) * vxtime.tsc_quot) >> US_SCALE; - return x; -} - static unsigned int cyc2ns_scale __read_mostly; void set_cyc2ns_scale(unsigned long khz) @@ -42,7 +21,7 @@ void set_cyc2ns_scale(unsigned long khz) cyc2ns_scale = (NSEC_PER_MSEC << NS_SCALE) / khz; } -unsigned long long cycles_2_ns(unsigned long long cyc) +static unsigned long long cycles_2_ns(unsigned long long cyc) { return (cyc * cyc2ns_scale) >> NS_SCALE; } @@ -61,6 +40,12 @@ unsigned long long sched_clock(void) return cycles_2_ns(a); } +static int tsc_unstable; + +static inline int check_tsc_unstable(void) +{ + return tsc_unstable; +} #ifdef CONFIG_CPU_FREQ /* Frequency scaling support. Adjust the TSC based timer when the cpu frequency @@ -89,24 +74,6 @@ static void handle_cpufreq_delayed_get(struct work_struct *v) cpufreq_delayed_issched = 0; } -/* if we notice lost ticks, schedule a call to cpufreq_get() as it tries - * to verify the CPU frequency the timing core thinks the CPU is running - * at is still correct. - */ -void cpufreq_delayed_get(void) -{ - static int warned; - if (cpufreq_init && !cpufreq_delayed_issched) { - cpufreq_delayed_issched = 1; - if (!warned) { - warned = 1; - printk(KERN_DEBUG "Losing some ticks... " - "checking if CPU frequency changed.\n"); - } - schedule_work(&cpufreq_delayed_get_work); - } -} - static unsigned int ref_freq = 0; static unsigned long loops_per_jiffy_ref = 0; @@ -142,7 +109,7 @@ static int time_cpufreq_notifier(struct notifier_block *nb, unsigned long val, cpu_khz = cpufreq_scale(cpu_khz_ref, ref_freq, freq->new); if (!(freq->flags & CPUFREQ_CONST_LOOPS)) - vxtime.tsc_quot = (USEC_PER_MSEC << US_SCALE) / cpu_khz; + mark_tsc_unstable(); } set_cyc2ns_scale(cpu_khz_ref); @@ -169,12 +136,6 @@ core_initcall(cpufreq_tsc); static int tsc_unstable = 0; -void mark_tsc_unstable(void) -{ - tsc_unstable = 1; -} -EXPORT_SYMBOL_GPL(mark_tsc_unstable); - /* * Make an educated guess if the TSC is trustworthy and synchronized * over all CPUs. @@ -210,3 +171,49 @@ int __init notsc_setup(char *s) } __setup("notsc", notsc_setup); + + +/* clock source code: */ +static cycle_t read_tsc(void) +{ + cycle_t ret = (cycle_t)get_cycles_sync(); + return ret; +} + +static struct clocksource clocksource_tsc = { + .name = "tsc", + .rating = 300, + .read = read_tsc, + .mask = CLOCKSOURCE_MASK(64), + .shift = 22, + .flags = CLOCK_SOURCE_IS_CONTINUOUS | + CLOCK_SOURCE_MUST_VERIFY, +}; + +void mark_tsc_unstable(void) +{ + if (!tsc_unstable) { + tsc_unstable = 1; + /* Change only the rating, when not registered */ + if (clocksource_tsc.mult) + clocksource_change_rating(&clocksource_tsc, 0); + else + clocksource_tsc.rating = 0; + } +} +EXPORT_SYMBOL_GPL(mark_tsc_unstable); + +static int __init init_tsc_clocksource(void) +{ + if (!notsc) { + clocksource_tsc.mult = clocksource_khz2mult(cpu_khz, + clocksource_tsc.shift); + if (check_tsc_unstable()) + clocksource_tsc.rating = 0; + + return clocksource_register(&clocksource_tsc); + } + return 0; +} + +module_init(init_tsc_clocksource); -- cgit v1.2.3 From 7460ed2844ffad7141e30271c0c3da8336e66014 Mon Sep 17 00:00:00 2001 From: john stultz Date: Fri, 16 Feb 2007 01:28:21 -0800 Subject: [PATCH] time: x86_64: re-enable vsyscall support for x86_64 Cleanup and re-enable vsyscall gettimeofday using the generic clocksource infrastructure. [akpm@osdl.org: cleanup] Signed-off-by: John Stultz Cc: Ingo Molnar Cc: Thomas Gleixner Cc: Andi Kleen Cc: Roman Zippel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86_64/Kconfig | 4 ++ arch/x86_64/kernel/hpet.c | 6 ++ arch/x86_64/kernel/time.c | 6 -- arch/x86_64/kernel/tsc.c | 7 +++ arch/x86_64/kernel/vmlinux.lds.S | 28 ++++----- arch/x86_64/kernel/vsyscall.c | 121 +++++++++++++++++++++++---------------- 6 files changed, 100 insertions(+), 72 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig index 286b4606fb1e..56eb14c98475 100644 --- a/arch/x86_64/Kconfig +++ b/arch/x86_64/Kconfig @@ -28,6 +28,10 @@ config GENERIC_TIME bool default y +config GENERIC_TIME_VSYSCALL + bool + default y + config ZONE_DMA32 bool default y diff --git a/arch/x86_64/kernel/hpet.c b/arch/x86_64/kernel/hpet.c index c23738899ae9..65a0edd71a17 100644 --- a/arch/x86_64/kernel/hpet.c +++ b/arch/x86_64/kernel/hpet.c @@ -458,6 +458,11 @@ static cycle_t read_hpet(void) return (cycle_t)readl(hpet_ptr); } +static cycle_t __vsyscall_fn vread_hpet(void) +{ + return readl((void __iomem *)fix_to_virt(VSYSCALL_HPET) + 0xf0); +} + struct clocksource clocksource_hpet = { .name = "hpet", .rating = 250, @@ -466,6 +471,7 @@ struct clocksource clocksource_hpet = { .mult = 0, /* set below */ .shift = HPET_SHIFT, .flags = CLOCK_SOURCE_IS_CONTINUOUS, + .vread = vread_hpet, }; static int __init init_hpet_clocksource(void) diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c index d84208e3c618..a87c51705620 100644 --- a/arch/x86_64/kernel/time.c +++ b/arch/x86_64/kernel/time.c @@ -53,13 +53,7 @@ DEFINE_SPINLOCK(rtc_lock); EXPORT_SYMBOL(rtc_lock); DEFINE_SPINLOCK(i8253_lock); -unsigned long vxtime_hz = PIT_TICK_RATE; - -struct vxtime_data __vxtime __section_vxtime; /* for vsyscalls */ - volatile unsigned long __jiffies __section_jiffies = INITIAL_JIFFIES; -struct timespec __xtime __section_xtime; -struct timezone __sys_tz __section_sys_tz; unsigned long profile_pc(struct pt_regs *regs) { diff --git a/arch/x86_64/kernel/tsc.c b/arch/x86_64/kernel/tsc.c index 8c92f2fe7e2e..895831865019 100644 --- a/arch/x86_64/kernel/tsc.c +++ b/arch/x86_64/kernel/tsc.c @@ -180,6 +180,12 @@ static cycle_t read_tsc(void) return ret; } +static cycle_t __vsyscall_fn vread_tsc(void) +{ + cycle_t ret = (cycle_t)get_cycles_sync(); + return ret; +} + static struct clocksource clocksource_tsc = { .name = "tsc", .rating = 300, @@ -188,6 +194,7 @@ static struct clocksource clocksource_tsc = { .shift = 22, .flags = CLOCK_SOURCE_IS_CONTINUOUS | CLOCK_SOURCE_MUST_VERIFY, + .vread = vread_tsc, }; void mark_tsc_unstable(void) diff --git a/arch/x86_64/kernel/vmlinux.lds.S b/arch/x86_64/kernel/vmlinux.lds.S index c360c4225244..b73212c0a550 100644 --- a/arch/x86_64/kernel/vmlinux.lds.S +++ b/arch/x86_64/kernel/vmlinux.lds.S @@ -88,31 +88,25 @@ SECTIONS __vsyscall_0 = VSYSCALL_VIRT_ADDR; . = ALIGN(CONFIG_X86_L1_CACHE_BYTES); - .xtime_lock : AT(VLOAD(.xtime_lock)) { *(.xtime_lock) } - xtime_lock = VVIRT(.xtime_lock); - - .vxtime : AT(VLOAD(.vxtime)) { *(.vxtime) } - vxtime = VVIRT(.vxtime); + .vsyscall_fn : AT(VLOAD(.vsyscall_fn)) { *(.vsyscall_fn) } + . = ALIGN(CONFIG_X86_L1_CACHE_BYTES); + .vsyscall_gtod_data : AT(VLOAD(.vsyscall_gtod_data)) + { *(.vsyscall_gtod_data) } + vsyscall_gtod_data = VVIRT(.vsyscall_gtod_data); .vgetcpu_mode : AT(VLOAD(.vgetcpu_mode)) { *(.vgetcpu_mode) } vgetcpu_mode = VVIRT(.vgetcpu_mode); - .sys_tz : AT(VLOAD(.sys_tz)) { *(.sys_tz) } - sys_tz = VVIRT(.sys_tz); - - .sysctl_vsyscall : AT(VLOAD(.sysctl_vsyscall)) { *(.sysctl_vsyscall) } - sysctl_vsyscall = VVIRT(.sysctl_vsyscall); - - .xtime : AT(VLOAD(.xtime)) { *(.xtime) } - xtime = VVIRT(.xtime); - . = ALIGN(CONFIG_X86_L1_CACHE_BYTES); .jiffies : AT(VLOAD(.jiffies)) { *(.jiffies) } jiffies = VVIRT(.jiffies); - .vsyscall_1 ADDR(.vsyscall_0) + 1024: AT(VLOAD(.vsyscall_1)) { *(.vsyscall_1) } - .vsyscall_2 ADDR(.vsyscall_0) + 2048: AT(VLOAD(.vsyscall_2)) { *(.vsyscall_2) } - .vsyscall_3 ADDR(.vsyscall_0) + 3072: AT(VLOAD(.vsyscall_3)) { *(.vsyscall_3) } + .vsyscall_1 ADDR(.vsyscall_0) + 1024: AT(VLOAD(.vsyscall_1)) + { *(.vsyscall_1) } + .vsyscall_2 ADDR(.vsyscall_0) + 2048: AT(VLOAD(.vsyscall_2)) + { *(.vsyscall_2) } + .vsyscall_3 ADDR(.vsyscall_0) + 3072: AT(VLOAD(.vsyscall_3)) + { *(.vsyscall_3) } . = VSYSCALL_VIRT_ADDR + 4096; diff --git a/arch/x86_64/kernel/vsyscall.c b/arch/x86_64/kernel/vsyscall.c index 313dc6ad780b..180ff919eaf9 100644 --- a/arch/x86_64/kernel/vsyscall.c +++ b/arch/x86_64/kernel/vsyscall.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include #include @@ -34,6 +35,7 @@ #include #include #include +#include #include #include #include @@ -44,56 +46,41 @@ #define __vsyscall(nr) __attribute__ ((unused,__section__(".vsyscall_" #nr))) #define __syscall_clobber "r11","rcx","memory" -int __sysctl_vsyscall __section_sysctl_vsyscall = 1; -seqlock_t __xtime_lock __section_xtime_lock = SEQLOCK_UNLOCKED; +struct vsyscall_gtod_data_t { + seqlock_t lock; + int sysctl_enabled; + struct timeval wall_time_tv; + struct timezone sys_tz; + cycle_t offset_base; + struct clocksource clock; +}; int __vgetcpu_mode __section_vgetcpu_mode; -#include - -static __always_inline void timeval_normalize(struct timeval * tv) +struct vsyscall_gtod_data_t __vsyscall_gtod_data __section_vsyscall_gtod_data = { - time_t __sec; - - __sec = tv->tv_usec / 1000000; - if (__sec) { - tv->tv_usec %= 1000000; - tv->tv_sec += __sec; - } -} + .lock = SEQLOCK_UNLOCKED, + .sysctl_enabled = 1, +}; -static __always_inline void do_vgettimeofday(struct timeval * tv) +void update_vsyscall(struct timespec *wall_time, struct clocksource *clock) { - long sequence, t; - unsigned long sec, usec; - - do { - sequence = read_seqbegin(&__xtime_lock); - - sec = __xtime.tv_sec; - usec = __xtime.tv_nsec / 1000; - - if (__vxtime.mode != VXTIME_HPET) { - t = get_cycles_sync(); - if (t < __vxtime.last_tsc) - t = __vxtime.last_tsc; - usec += ((t - __vxtime.last_tsc) * - __vxtime.tsc_quot) >> 32; - /* See comment in x86_64 do_gettimeofday. */ - } else { - usec += ((readl((void __iomem *) - fix_to_virt(VSYSCALL_HPET) + 0xf0) - - __vxtime.last) * __vxtime.quot) >> 32; - } - } while (read_seqretry(&__xtime_lock, sequence)); - - tv->tv_sec = sec + usec / 1000000; - tv->tv_usec = usec % 1000000; + unsigned long flags; + + write_seqlock_irqsave(&vsyscall_gtod_data.lock, flags); + /* copy vsyscall data */ + vsyscall_gtod_data.clock = *clock; + vsyscall_gtod_data.wall_time_tv.tv_sec = wall_time->tv_sec; + vsyscall_gtod_data.wall_time_tv.tv_usec = wall_time->tv_nsec/1000; + vsyscall_gtod_data.sys_tz = sys_tz; + write_sequnlock_irqrestore(&vsyscall_gtod_data.lock, flags); } -/* RED-PEN may want to readd seq locking, but then the variable should be write-once. */ +/* RED-PEN may want to readd seq locking, but then the variable should be + * write-once. + */ static __always_inline void do_get_tz(struct timezone * tz) { - *tz = __sys_tz; + *tz = __vsyscall_gtod_data.sys_tz; } static __always_inline int gettimeofday(struct timeval *tv, struct timezone *tz) @@ -101,7 +88,8 @@ static __always_inline int gettimeofday(struct timeval *tv, struct timezone *tz) int ret; asm volatile("vsysc2: syscall" : "=a" (ret) - : "0" (__NR_gettimeofday),"D" (tv),"S" (tz) : __syscall_clobber ); + : "0" (__NR_gettimeofday),"D" (tv),"S" (tz) + : __syscall_clobber ); return ret; } @@ -114,10 +102,44 @@ static __always_inline long time_syscall(long *t) return secs; } +static __always_inline void do_vgettimeofday(struct timeval * tv) +{ + cycle_t now, base, mask, cycle_delta; + unsigned long seq, mult, shift, nsec_delta; + cycle_t (*vread)(void); + do { + seq = read_seqbegin(&__vsyscall_gtod_data.lock); + + vread = __vsyscall_gtod_data.clock.vread; + if (unlikely(!__vsyscall_gtod_data.sysctl_enabled || !vread)) { + gettimeofday(tv,0); + return; + } + now = vread(); + base = __vsyscall_gtod_data.clock.cycle_last; + mask = __vsyscall_gtod_data.clock.mask; + mult = __vsyscall_gtod_data.clock.mult; + shift = __vsyscall_gtod_data.clock.shift; + + *tv = __vsyscall_gtod_data.wall_time_tv; + + } while (read_seqretry(&__vsyscall_gtod_data.lock, seq)); + + /* calculate interval: */ + cycle_delta = (now - base) & mask; + /* convert to nsecs: */ + nsec_delta = (cycle_delta * mult) >> shift; + + /* convert to usecs and add to timespec: */ + tv->tv_usec += nsec_delta / NSEC_PER_USEC; + while (tv->tv_usec > USEC_PER_SEC) { + tv->tv_sec += 1; + tv->tv_usec -= USEC_PER_SEC; + } +} + int __vsyscall(0) vgettimeofday(struct timeval * tv, struct timezone * tz) { - if (!__sysctl_vsyscall) - return gettimeofday(tv,tz); if (tv) do_vgettimeofday(tv); if (tz) @@ -129,11 +151,11 @@ int __vsyscall(0) vgettimeofday(struct timeval * tv, struct timezone * tz) * unlikely */ time_t __vsyscall(1) vtime(time_t *t) { - if (!__sysctl_vsyscall) + if (unlikely(!__vsyscall_gtod_data.sysctl_enabled)) return time_syscall(t); else if (t) - *t = __xtime.tv_sec; - return __xtime.tv_sec; + *t = __vsyscall_gtod_data.wall_time_tv.tv_sec; + return __vsyscall_gtod_data.wall_time_tv.tv_sec; } /* Fast way to get current CPU and node. @@ -210,7 +232,7 @@ static int vsyscall_sysctl_change(ctl_table *ctl, int write, struct file * filp, ret = -ENOMEM; goto out; } - if (!sysctl_vsyscall) { + if (!vsyscall_gtod_data.sysctl_enabled) { writew(SYSCALL, map1); writew(SYSCALL, map2); } else { @@ -232,7 +254,8 @@ static int vsyscall_sysctl_nostrat(ctl_table *t, int __user *name, int nlen, static ctl_table kernel_table2[] = { { .ctl_name = 99, .procname = "vsyscall64", - .data = &sysctl_vsyscall, .maxlen = sizeof(int), .mode = 0644, + .data = &vsyscall_gtod_data.sysctl_enabled, .maxlen = sizeof(int), + .mode = 0644, .strategy = vsyscall_sysctl_nostrat, .proc_handler = vsyscall_sysctl_change }, {} -- cgit v1.2.3 From 76d2160147f43f982dfe881404cfde9fd0a9da21 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Fri, 16 Feb 2007 01:28:24 -0800 Subject: [PATCH] genirq: do not mask interrupts by default Never mask interrupts immediately upon request. Disabling interrupts in high-performance codepaths is rare, and on the other hand this change could recover lost edges (or even other types of lost interrupts) by conservatively only masking interrupts after they happen. (NOTE: with this change the highlevel irq-disable code still soft-disables this IRQ line - and if such an interrupt happens then the IRQ flow handler keeps the IRQ masked.) Mark i8529A controllers as 'never loses an edge'. Signed-off-by: Ingo Molnar Cc: Thomas Gleixner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/i8259.c | 1 + arch/x86_64/kernel/i8259.c | 1 + 2 files changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/i386/kernel/i8259.c b/arch/i386/kernel/i8259.c index 255b1af9a054..03abfdb1a6e4 100644 --- a/arch/i386/kernel/i8259.c +++ b/arch/i386/kernel/i8259.c @@ -41,6 +41,7 @@ static void mask_and_ack_8259A(unsigned int); static struct irq_chip i8259A_chip = { .name = "XT-PIC", .mask = disable_8259A_irq, + .disable = disable_8259A_irq, .unmask = enable_8259A_irq, .mask_ack = mask_and_ack_8259A, }; diff --git a/arch/x86_64/kernel/i8259.c b/arch/x86_64/kernel/i8259.c index d73c79e821f1..01e2cf0bdeb1 100644 --- a/arch/x86_64/kernel/i8259.c +++ b/arch/x86_64/kernel/i8259.c @@ -103,6 +103,7 @@ static void mask_and_ack_8259A(unsigned int); static struct irq_chip i8259A_chip = { .name = "XT-PIC", .mask = disable_8259A_irq, + .disable = disable_8259A_irq, .unmask = enable_8259A_irq, .mask_ack = mask_and_ack_8259A, }; -- cgit v1.2.3 From d7e25f3394ba05a6d64cb2be42c2765fe72ea6b2 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Fri, 16 Feb 2007 01:28:24 -0800 Subject: [PATCH] genirq: remove IRQ_DISABLED Now that disable_irq() defaults to delayed-disable semantics, the IRQ_DISABLED flag is not needed anymore. Signed-off-by: Ingo Molnar Cc: Thomas Gleixner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/arm/kernel/irq.c | 3 +-- arch/i386/kernel/io_apic.c | 4 +--- arch/powerpc/platforms/powermac/pic.c | 2 -- arch/x86_64/kernel/io_apic.c | 4 +--- 4 files changed, 3 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index ec01f08f5642..e101846ab7dd 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -159,8 +159,7 @@ void __init init_IRQ(void) int irq; for (irq = 0; irq < NR_IRQS; irq++) - irq_desc[irq].status |= IRQ_NOREQUEST | IRQ_DELAYED_DISABLE | - IRQ_NOPROBE; + irq_desc[irq].status |= IRQ_NOREQUEST | IRQ_NOPROBE; #ifdef CONFIG_SMP bad_irq_desc.affinity = CPU_MASK_ALL; diff --git a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c index f003a4ce0a93..4ccebd454e25 100644 --- a/arch/i386/kernel/io_apic.c +++ b/arch/i386/kernel/io_apic.c @@ -1281,11 +1281,9 @@ static void ioapic_register_intr(int irq, int vector, unsigned long trigger) trigger == IOAPIC_LEVEL) set_irq_chip_and_handler_name(irq, &ioapic_chip, handle_fasteoi_irq, "fasteoi"); - else { - irq_desc[irq].status |= IRQ_DELAYED_DISABLE; + else set_irq_chip_and_handler_name(irq, &ioapic_chip, handle_edge_irq, "edge"); - } set_intr_gate(vector, interrupt[irq]); } diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c index 39db12890214..5e5c0e4add91 100644 --- a/arch/powerpc/platforms/powermac/pic.c +++ b/arch/powerpc/platforms/powermac/pic.c @@ -305,8 +305,6 @@ static int pmac_pic_host_map(struct irq_host *h, unsigned int virq, level = !!(level_mask[hw >> 5] & (1UL << (hw & 0x1f))); if (level) desc->status |= IRQ_LEVEL; - else - desc->status |= IRQ_DELAYED_DISABLE; set_irq_chip_and_handler(virq, &pmac_pic, level ? handle_level_irq : handle_edge_irq); return 0; diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c index 566e64d966c4..950682f35766 100644 --- a/arch/x86_64/kernel/io_apic.c +++ b/arch/x86_64/kernel/io_apic.c @@ -810,11 +810,9 @@ static void ioapic_register_intr(int irq, int vector, unsigned long trigger) trigger == IOAPIC_LEVEL) set_irq_chip_and_handler_name(irq, &ioapic_chip, handle_fasteoi_irq, "fasteoi"); - else { - irq_desc[irq].status |= IRQ_DELAYED_DISABLE; + else set_irq_chip_and_handler_name(irq, &ioapic_chip, handle_edge_irq, "edge"); - } } static void __init setup_IO_APIC_irq(int apic, int pin, int idx, int irq) { -- cgit v1.2.3 From 29cfe6f4fb7d187f65564764a0ecf2caf9d8ed58 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Fri, 16 Feb 2007 12:01:29 -0600 Subject: [POWERPC] add of_get_mac_address and update fsl_soc.c to use it Add function of_get_mac_address(), which obtains the best MAC address to use from the device tree by checking various properties in order. The order is: 'mac-address', then 'local-mac-address', then 'address'. It skips properties that contain invalid MAC addresses, which were probably not initialized by U-Boot. Update gfar_of_init() and fs_enet_of_init() in fsl_soc.c to call of_get_mac_address(). Signed-off-by: Timur Tabi Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/prom_parse.c | 40 ++++++++++++++++++++++++++++++++++++++++ arch/powerpc/sysdev/fsl_soc.c | 19 +++++++------------ 2 files changed, 47 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c index 12c51e4ad2b4..ea6fd552c7ea 100644 --- a/arch/powerpc/kernel/prom_parse.c +++ b/arch/powerpc/kernel/prom_parse.c @@ -5,6 +5,7 @@ #include #include #include +#include #include #include @@ -1003,3 +1004,42 @@ int of_irq_map_one(struct device_node *device, int index, struct of_irq *out_irq return res; } EXPORT_SYMBOL_GPL(of_irq_map_one); + +/** + * Search the device tree for the best MAC address to use. 'mac-address' is + * checked first, because that is supposed to contain to "most recent" MAC + * address. If that isn't set, then 'local-mac-address' is checked next, + * because that is the default address. If that isn't set, then the obsolete + * 'address' is checked, just in case we're using an old device tree. + * + * Note that the 'address' property is supposed to contain a virtual address of + * the register set, but some DTS files have redefined that property to be the + * MAC address. + * + * All-zero MAC addresses are rejected, because those could be properties that + * exist in the device tree, but were not set by U-Boot. For example, the + * DTS could define 'mac-address' and 'local-mac-address', with zero MAC + * addresses. Some older U-Boots only initialized 'local-mac-address'. In + * this case, the real MAC is in 'local-mac-address', and 'mac-address' exists + * but is all zeros. +*/ +const void *of_get_mac_address(struct device_node *np) +{ + struct property *pp; + + pp = of_find_property(np, "mac-address", NULL); + if (pp && (pp->length == 6) && is_valid_ether_addr(pp->value)) + return pp->value; + + pp = of_find_property(np, "local-mac-address", NULL); + if (pp && (pp->length == 6) && is_valid_ether_addr(pp->value)) + return pp->value; + + pp = of_find_property(np, "address", NULL); + if (pp && (pp->length == 6) && is_valid_ether_addr(pp->value)) + return pp->value; + + return NULL; +} +EXPORT_SYMBOL(of_get_mac_address); + diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index 34161bc5a02f..d20f02927f72 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -233,14 +233,7 @@ static int __init gfar_of_init(void) goto err; } - mac_addr = get_property(np, "local-mac-address", NULL); - if (mac_addr == NULL) - mac_addr = get_property(np, "mac-address", NULL); - if (mac_addr == NULL) { - /* Obsolete */ - mac_addr = get_property(np, "address", NULL); - } - + mac_addr = of_get_mac_address(np); if (mac_addr) memcpy(gfar_data.mac_addr, mac_addr, 6); @@ -646,8 +639,9 @@ static int __init fs_enet_of_init(void) goto unreg; } - mac_addr = get_property(np, "mac-address", NULL); - memcpy(fs_enet_data.macaddr, mac_addr, 6); + mac_addr = of_get_mac_address(np); + if (mac_addr) + memcpy(fs_enet_data.macaddr, mac_addr, 6); ph = get_property(np, "phy-handle", NULL); phy = of_find_node_by_phandle(*ph); @@ -931,8 +925,9 @@ static int __init fs_enet_of_init(void) goto err; r[0].name = enet_regs; - mac_addr = (void *)get_property(np, "mac-address", NULL); - memcpy(fs_enet_data.macaddr, mac_addr, 6); + mac_addr = of_get_mac_address(np); + if (mac_addr) + memcpy(fs_enet_data.macaddr, mac_addr, 6); ph = (phandle *) get_property(np, "phy-handle", NULL); if (ph != NULL) -- cgit v1.2.3 From aebcbf39be0aadded32f4cd82c1d88a8cac4614b Mon Sep 17 00:00:00 2001 From: Olaf Hering Date: Fri, 16 Feb 2007 10:20:46 +0100 Subject: [POWERPC] use winbond libata instead of ide driver for pseries CD drives Change the default for the built-in IDE on p610/p615/p630 from ide to libata. libata has better error handling and the drive can recover when hald does its CD media polling. Signed-off-by: Olaf Hering Signed-off-by: Paul Mackerras --- arch/powerpc/configs/ppc64_defconfig | 4 ++-- arch/powerpc/configs/pseries_defconfig | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig index debac66e8258..a8da0aea3b87 100644 --- a/arch/powerpc/configs/ppc64_defconfig +++ b/arch/powerpc/configs/ppc64_defconfig @@ -500,7 +500,7 @@ CONFIG_BLK_DEV_AMD74XX=y # CONFIG_BLK_DEV_PDC202XX_NEW is not set # CONFIG_BLK_DEV_SVWKS is not set # CONFIG_BLK_DEV_SIIMAGE is not set -CONFIG_BLK_DEV_SL82C105=y +# CONFIG_BLK_DEV_SL82C105 is not set # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set @@ -646,7 +646,7 @@ CONFIG_SATA_SVW=y # CONFIG_PATA_SIL680 is not set # CONFIG_PATA_SIS is not set # CONFIG_PATA_VIA is not set -# CONFIG_PATA_WINBOND is not set +CONFIG_PATA_WINBOND=y # # Multi-device support (RAID and LVM) diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index 1c794fe718fd..6e96e50c362d 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -483,7 +483,7 @@ CONFIG_BLK_DEV_AMD74XX=y # CONFIG_BLK_DEV_PDC202XX_NEW is not set # CONFIG_BLK_DEV_SVWKS is not set # CONFIG_BLK_DEV_SIIMAGE is not set -CONFIG_BLK_DEV_SL82C105=y +# CONFIG_BLK_DEV_SL82C105 is not set # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set @@ -628,7 +628,7 @@ CONFIG_ATA=y # CONFIG_PATA_SIL680 is not set # CONFIG_PATA_SIS is not set # CONFIG_PATA_VIA is not set -# CONFIG_PATA_WINBOND is not set +CONFIG_PATA_WINBOND=y # # Multi-device support (RAID and LVM) -- cgit v1.2.3 From 5d30bf309717a518d0c4180af41650d4dcd3bb38 Mon Sep 17 00:00:00 2001 From: Manish Ahuja Date: Thu, 8 Feb 2007 16:01:17 -0600 Subject: [POWERPC] pseries: Enabling auto poweron after power is restored. During power outages, the UPS notifies the system for a shutdown. In the current setup, it isn't possible to poweron when power is restored. This patch fixes the issue by calling the right ibm,power-off-ups token during such events. It also adds a sysfs interface so userspace can specify whether or not to power on when power is restored. Signed-off-by: Manish Ahuja Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pseries/Makefile | 2 +- arch/powerpc/platforms/pseries/power.c | 87 ++++++++++++++++++++++++++++++++ arch/powerpc/platforms/pseries/pseries.h | 3 ++ arch/powerpc/platforms/pseries/setup.c | 30 ++++++++++- 4 files changed, 120 insertions(+), 2 deletions(-) create mode 100644 arch/powerpc/platforms/pseries/power.c (limited to 'arch') diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile index dc0583bdbc63..2dfd05095a25 100644 --- a/arch/powerpc/platforms/pseries/Makefile +++ b/arch/powerpc/platforms/pseries/Makefile @@ -4,7 +4,7 @@ endif obj-y := pci.o lpar.o hvCall.o nvram.o reconfig.o \ setup.o iommu.o ras.o rtasd.o pci_dlpar.o \ - firmware.o + firmware.o power.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_XICS) += xics.o obj-$(CONFIG_SCANLOG) += scanlog.o diff --git a/arch/powerpc/platforms/pseries/power.c b/arch/powerpc/platforms/pseries/power.c new file mode 100644 index 000000000000..2624b71df73d --- /dev/null +++ b/arch/powerpc/platforms/pseries/power.c @@ -0,0 +1,87 @@ +/* + * Interface for power-management for ppc64 compliant platform + * + * Manish Ahuja + * + * Feb 2007 + * + * Copyright (C) 2007 IBM Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include + +unsigned long rtas_poweron_auto; /* default and normal state is 0 */ + +static ssize_t auto_poweron_show(struct subsystem *subsys, char *buf) +{ + return sprintf(buf, "%lu\n", rtas_poweron_auto); +} + +static ssize_t +auto_poweron_store(struct subsystem *subsys, const char *buf, size_t n) +{ + int ret; + unsigned long ups_restart; + ret = sscanf(buf, "%lu", &ups_restart); + + if ((ret == 1) && ((ups_restart == 1) || (ups_restart == 0))){ + rtas_poweron_auto = ups_restart; + return n; + } + return -EINVAL; +} + +static struct subsys_attribute auto_poweron_attr = { + .attr = { + .name = __stringify(auto_poweron), + .mode = 0644, + }, + .show = auto_poweron_show, + .store = auto_poweron_store, +}; + +#ifndef CONFIG_PM +decl_subsys(power,NULL,NULL); + +static struct attribute *g[] = { + &auto_poweron_attr.attr, + NULL, +}; + +static struct attribute_group attr_group = { + .attrs = g, +}; + +static int __init pm_init(void) +{ + int error = subsystem_register(&power_subsys); + if (!error) + error = sysfs_create_group(&power_subsys.kset.kobj,&attr_group); + return error; +} +core_initcall(pm_init); +#else +extern struct subsystem power_subsys; + +static int __init apo_pm_init(void) +{ + return (subsys_create_file(&power_subsys, &auto_poweron_attr)); +} +__initcall(apo_pm_init); +#endif diff --git a/arch/powerpc/platforms/pseries/pseries.h b/arch/powerpc/platforms/pseries/pseries.h index 35264f9af0ff..22bc01989749 100644 --- a/arch/powerpc/platforms/pseries/pseries.h +++ b/arch/powerpc/platforms/pseries/pseries.h @@ -33,4 +33,7 @@ static inline void setup_kexec_cpu_down_xics(void) { } static inline void setup_kexec_cpu_down_mpic(void) { } #endif +/* Poweron flag used for enabling auto ups restart */ +extern unsigned long rtas_poweron_auto; + #endif /* _PSERIES_PSERIES_H */ diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 435a04596526..34aff47b1f55 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -486,6 +486,34 @@ static int pSeries_pci_probe_mode(struct pci_bus *bus) return PCI_PROBE_NORMAL; } +/** + * pSeries_power_off - tell firmware about how to power off the system. + * + * This function calls either the power-off rtas token in normal cases + * or the ibm,power-off-ups token (if present & requested) in case of + * a power failure. If power-off token is used, power on will only be + * possible with power button press. If ibm,power-off-ups token is used + * it will allow auto poweron after power is restored. + */ +void pSeries_power_off(void) +{ + int rc; + int rtas_poweroff_ups_token = rtas_token("ibm,power-off-ups"); + + if (rtas_flash_term_hook) + rtas_flash_term_hook(SYS_POWER_OFF); + + if (rtas_poweron_auto == 0 || + rtas_poweroff_ups_token == RTAS_UNKNOWN_SERVICE) { + rc = rtas_call(rtas_token("power-off"), 2, 1, NULL, -1, -1); + printk(KERN_INFO "RTAS power-off returned %d\n", rc); + } else { + rc = rtas_call(rtas_poweroff_ups_token, 0, 1, NULL); + printk(KERN_INFO "RTAS ibm,power-off-ups returned %d\n", rc); + } + for (;;); +} + define_machine(pseries) { .name = "pSeries", .probe = pSeries_probe, @@ -496,7 +524,7 @@ define_machine(pseries) { .pcibios_fixup = pSeries_final_fixup, .pci_probe_mode = pSeries_pci_probe_mode, .restart = rtas_restart, - .power_off = rtas_power_off, + .power_off = pSeries_power_off, .halt = rtas_halt, .panic = rtas_os_term, .get_boot_time = rtas_get_boot_time, -- cgit v1.2.3 From f52383d395178afde66d049e176bb2c59a8c941a Mon Sep 17 00:00:00 2001 From: Andy Gospodarek Date: Mon, 5 Feb 2007 16:36:10 -0800 Subject: PCI: add systems for automatic breadth-first device sorting This is an additional list of systems that exhibit the PCI device ordering issue that prompted the following patch: commit 6b4b78fed47e7380dfe9280b154e8b9bfcd4c86c Author: Matt Domsch Date: Fri Sep 29 15:23:23 2006 -0500 PCI: optionally sort device lists breadth-first Adding these systems to the list prevents the need for the additional kernel command line argument. Signed-off-by: Andy Gospodarek Cc: Matt Domsch Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- arch/i386/pci/common.c | 88 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 88 insertions(+) (limited to 'arch') diff --git a/arch/i386/pci/common.c b/arch/i386/pci/common.c index 53ca6e897984..1bb069372143 100644 --- a/arch/i386/pci/common.c +++ b/arch/i386/pci/common.c @@ -191,6 +191,94 @@ static struct dmi_system_id __devinitdata pciprobe_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2950"), }, }, + { + .callback = set_bf_sort, + .ident = "HP ProLiant BL20p G3", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "HP"), + DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL20p G3"), + }, + }, + { + .callback = set_bf_sort, + .ident = "HP ProLiant BL20p G4", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "HP"), + DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL20p G4"), + }, + }, + { + .callback = set_bf_sort, + .ident = "HP ProLiant BL30p G1", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "HP"), + DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL30p G1"), + }, + }, + { + .callback = set_bf_sort, + .ident = "HP ProLiant BL25p G1", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "HP"), + DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL25p G1"), + }, + }, + { + .callback = set_bf_sort, + .ident = "HP ProLiant BL35p G1", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "HP"), + DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL35p G1"), + }, + }, + { + .callback = set_bf_sort, + .ident = "HP ProLiant BL45p G1", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "HP"), + DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL45p G1"), + }, + }, + { + .callback = set_bf_sort, + .ident = "HP ProLiant BL45p G2", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "HP"), + DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL45p G2"), + }, + }, + { + .callback = set_bf_sort, + .ident = "HP ProLiant BL460c G1", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "HP"), + DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL460c G1"), + }, + }, + { + .callback = set_bf_sort, + .ident = "HP ProLiant BL465c G1", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "HP"), + DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL465c G1"), + }, + }, + { + .callback = set_bf_sort, + .ident = "HP ProLiant BL480c G1", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "HP"), + DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL480c G1"), + }, + }, + { + .callback = set_bf_sort, + .ident = "HP ProLiant BL685c G1", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "HP"), + DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL685c G1"), + }, + }, {} }; -- cgit v1.2.3 From 578f8f20f3c7e2c18083cf3bd434df994280af30 Mon Sep 17 00:00:00 2001 From: Jon Loeliger Date: Fri, 16 Feb 2007 16:14:15 -0600 Subject: [POWERPC] 8[56]xx: Remove obsolete setting of ROOT_DEV for 85xx and 86xx platforms. Signed-off-by: Jon Loeliger Signed-off-by: Kumar Gala --- arch/powerpc/platforms/85xx/mpc8568_mds.c | 1 - arch/powerpc/platforms/85xx/mpc85xx_ads.c | 7 ------- arch/powerpc/platforms/85xx/mpc85xx_cds.c | 7 ------- arch/powerpc/platforms/86xx/mpc86xx_hpcn.c | 7 ------- 4 files changed, 22 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/85xx/mpc8568_mds.c b/arch/powerpc/platforms/85xx/mpc8568_mds.c index 0861d1107bc8..324138a206a4 100644 --- a/arch/powerpc/platforms/85xx/mpc8568_mds.c +++ b/arch/powerpc/platforms/85xx/mpc8568_mds.c @@ -27,7 +27,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c index c56fce57621c..741bcea8f991 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c @@ -17,7 +17,6 @@ #include #include #include -#include #include #include @@ -245,12 +244,6 @@ static void __init mpc85xx_ads_setup_arch(void) add_bridge(np); ppc_md.pci_exclude_device = mpc85xx_exclude_device; #endif - -#ifdef CONFIG_ROOT_NFS - ROOT_DEV = Root_NFS; -#else - ROOT_DEV = Root_HDA1; -#endif } static void mpc85xx_ads_show_cpuinfo(struct seq_file *m) diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c index abc0aca6de40..bf6c60455a89 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c @@ -22,7 +22,6 @@ #include #include #include -#include #include #include #include @@ -263,12 +262,6 @@ static void __init mpc85xx_cds_setup_arch(void) ppc_md.pcibios_fixup = mpc85xx_cds_pcibios_fixup; ppc_md.pci_exclude_device = mpc85xx_exclude_device; #endif - -#ifdef CONFIG_ROOT_NFS - ROOT_DEV = Root_NFS; -#else - ROOT_DEV = Root_HDA1; -#endif } static void mpc85xx_cds_show_cpuinfo(struct seq_file *m) diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c index f4dd5f2f8a28..030f9b2adbca 100644 --- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c +++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c @@ -18,7 +18,6 @@ #include #include #include -#include #include #include @@ -365,12 +364,6 @@ mpc86xx_hpcn_setup_arch(void) printk("MPC86xx HPCN board from Freescale Semiconductor\n"); -#ifdef CONFIG_ROOT_NFS - ROOT_DEV = Root_NFS; -#else - ROOT_DEV = Root_HDA1; -#endif - #ifdef CONFIG_SMP mpc86xx_smp_init(); #endif -- cgit v1.2.3 From 00e402d06609d3722b018d696c12cb668065988d Mon Sep 17 00:00:00 2001 From: Jon Loeliger Date: Fri, 16 Feb 2007 16:17:41 -0600 Subject: [POWERPC] 86xx: Add missing of_node_put() in mpc86xx_hpcn_init_irq(). Signed-off-by: Jon Loeliger Signed-off-by: Kumar Gala --- arch/powerpc/platforms/86xx/mpc86xx_hpcn.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c index f4dd5f2f8a28..7e237eb7a707 100644 --- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c +++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c @@ -120,6 +120,8 @@ mpc86xx_hpcn_init_irq(void) DBG("mpc86xxhpcn: cascade mapped to irq %d\n", cascade_irq); i8259_init(cascade_node, 0); + of_node_put(cascade_node); + set_irq_chained_handler(cascade_irq, mpc86xx_8259_cascade); #endif } -- cgit v1.2.3 From db2d4ccdc8f9f3433d3a8566404189f2e9295c23 Mon Sep 17 00:00:00 2001 From: John Keller Date: Fri, 16 Feb 2007 15:07:27 -0600 Subject: ACPI: IA64: react to acpi_table_parse() return value change acpi_boot_init() is making a bad check on the return status from acpi_table_parse(). acpi_table_parse() now returns zero on success, one on failure. Signed-off-by: Aaron Young Signed-off-by: Len Brown --- arch/ia64/kernel/acpi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index 9197d7b361b3..3549c94467b8 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -651,7 +651,7 @@ int __init acpi_boot_init(void) * information -- the successor to MPS tables. */ - if (acpi_table_parse(ACPI_SIG_MADT, acpi_parse_madt) < 1) { + if (acpi_table_parse(ACPI_SIG_MADT, acpi_parse_madt)) { printk(KERN_ERR PREFIX "Can't find MADT\n"); goto skip_madt; } @@ -702,7 +702,7 @@ int __init acpi_boot_init(void) * gets interrupts such as power and sleep buttons. If it's not * on a Legacy interrupt, it needs to be setup. */ - if (acpi_table_parse(ACPI_SIG_FADT, acpi_parse_fadt) < 1) + if (acpi_table_parse(ACPI_SIG_FADT, acpi_parse_fadt)) printk(KERN_ERR PREFIX "Can't find FADT\n"); #ifdef CONFIG_SMP -- cgit v1.2.3 From 336c3c2ec7e24bdf01c8f0c311ac7081b1f73d72 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Sat, 17 Feb 2007 09:10:44 -0600 Subject: [POWERPC] 83xx: Cleaning up machine probing and board initcalls Cleaned up the probing functionality to be more consistent across all 83xx boards and added machine_is() protection around board initcalls to ensure they only do something if we are actually running on that board. Additionally, removed some dead code on mpc832x_mds. Signed-off-by: Kumar Gala --- arch/powerpc/platforms/83xx/mpc8313_rdb.c | 11 ++--------- arch/powerpc/platforms/83xx/mpc832x_mds.c | 23 ++++++++--------------- arch/powerpc/platforms/83xx/mpc834x_itx.c | 7 +++---- arch/powerpc/platforms/83xx/mpc834x_mds.c | 10 ++++++---- arch/powerpc/platforms/83xx/mpc8360e_pb.c | 17 ++++++++--------- 5 files changed, 27 insertions(+), 41 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/83xx/mpc8313_rdb.c b/arch/powerpc/platforms/83xx/mpc8313_rdb.c index c3b98c34eb6b..32e9e9492841 100644 --- a/arch/powerpc/platforms/83xx/mpc8313_rdb.c +++ b/arch/powerpc/platforms/83xx/mpc8313_rdb.c @@ -74,16 +74,9 @@ void __init mpc8313_rdb_init_IRQ(void) */ static int __init mpc8313_rdb_probe(void) { - char *model = of_get_flat_dt_prop(of_get_flat_dt_root(), - "model", NULL); - if (model == NULL) - return 0; - if (strcmp(model, "MPC8313ERDB")) - return 0; + unsigned long root = of_get_flat_dt_root(); - DBG("MPC8313 RDB found\n"); - - return 1; + return of_flat_dt_is_compatible(root, "MPC8313ERDB"); } define_machine(mpc8313_rdb) { diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.c b/arch/powerpc/platforms/83xx/mpc832x_mds.c index 3ecb55f8a6e2..c6bfe72893d4 100644 --- a/arch/powerpc/platforms/83xx/mpc832x_mds.c +++ b/arch/powerpc/platforms/83xx/mpc832x_mds.c @@ -57,11 +57,6 @@ unsigned long isa_mem_base = 0; static u8 *bcsr_regs = NULL; -u8 *get_bcsr(void) -{ - return bcsr_regs; -} - /* ************************************************************************ * * Setup the architecture @@ -140,6 +135,9 @@ static int __init mpc832x_declare_of_platform_devices(void) { struct device_node *np; + if (!machine_is(mpc832x_mds)) + return 0; + for (np = NULL; (np = of_find_compatible_node(np, "network", "ucc_geth")) != NULL;) { int ucc_num; @@ -189,6 +187,9 @@ static int __init mpc832x_rtc_hookup(void) { struct timespec tv; + if (!machine_is(mpc832x_mds)) + return 0; + ppc_md.get_rtc_time = ds1374_get_rtc_time; ppc_md.set_rtc_time = ds1374_set_rtc_time; @@ -207,17 +208,9 @@ late_initcall(mpc832x_rtc_hookup); */ static int __init mpc832x_sys_probe(void) { - char *model = of_get_flat_dt_prop(of_get_flat_dt_root(), - "model", NULL); - - if (model == NULL) - return 0; - if (strcmp(model, "MPC8323EMDS")) - return 0; - - DBG("%s found\n", model); + unsigned long root = of_get_flat_dt_root(); - return 1; + return of_flat_dt_is_compatible(root, "MPC832xMDS"); } define_machine(mpc832x_mds) { diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.c b/arch/powerpc/platforms/83xx/mpc834x_itx.c index 443a3172f370..a8f66fb3391a 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_itx.c +++ b/arch/powerpc/platforms/83xx/mpc834x_itx.c @@ -100,10 +100,9 @@ static void __init mpc834x_itx_init_IRQ(void) */ static int __init mpc834x_itx_probe(void) { - /* We always match for now, eventually we should look at the flat - dev tree to ensure this is the board we are suppose to run on - */ - return 1; + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "MPC834xMITX"); } define_machine(mpc834x_itx) { diff --git a/arch/powerpc/platforms/83xx/mpc834x_mds.c b/arch/powerpc/platforms/83xx/mpc834x_mds.c index d2736da76c46..9fd9adf8ff99 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_mds.c +++ b/arch/powerpc/platforms/83xx/mpc834x_mds.c @@ -176,6 +176,9 @@ static int __init mpc834x_rtc_hookup(void) { struct timespec tv; + if (!machine_is(mpc834x_mds)) + return 0; + ppc_md.get_rtc_time = ds1374_get_rtc_time; ppc_md.set_rtc_time = ds1374_set_rtc_time; @@ -194,10 +197,9 @@ late_initcall(mpc834x_rtc_hookup); */ static int __init mpc834x_mds_probe(void) { - /* We always match for now, eventually we should look at the flat - dev tree to ensure this is the board we are suppose to run on - */ - return 1; + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "MPC834xMDS"); } define_machine(mpc834x_mds) { diff --git a/arch/powerpc/platforms/83xx/mpc8360e_pb.c b/arch/powerpc/platforms/83xx/mpc8360e_pb.c index ccce2f9f283d..76fcb5bdb759 100644 --- a/arch/powerpc/platforms/83xx/mpc8360e_pb.c +++ b/arch/powerpc/platforms/83xx/mpc8360e_pb.c @@ -145,6 +145,9 @@ static int __init mpc8360_declare_of_platform_devices(void) { struct device_node *np; + if (!machine_is(mpc8360_sys)) + return 0; + for (np = NULL; (np = of_find_compatible_node(np, "network", "ucc_geth")) != NULL;) { int ucc_num; @@ -194,6 +197,9 @@ static int __init mpc8360_rtc_hookup(void) { struct timespec tv; + if (!machine_is(mpc8360_sys)) + return 0; + ppc_md.get_rtc_time = ds1374_get_rtc_time; ppc_md.set_rtc_time = ds1374_set_rtc_time; @@ -212,16 +218,9 @@ late_initcall(mpc8360_rtc_hookup); */ static int __init mpc8360_sys_probe(void) { - char *model = of_get_flat_dt_prop(of_get_flat_dt_root(), - "model", NULL); - if (model == NULL) - return 0; - if (strcmp(model, "MPC8360EPB")) - return 0; - - DBG("MPC8360EMDS-PB found\n"); + unsigned long root = of_get_flat_dt_root(); - return 1; + return of_flat_dt_is_compatible(root, "MPC836xMDS"); } define_machine(mpc8360_sys) { -- cgit v1.2.3 From 1eccad01acaf7659abdcc9a72408456558bb4fb0 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Sat, 17 Feb 2007 09:25:57 -0600 Subject: [POWERPC] 83xx: Remove obsolete setting of ROOT_DEV. Signed-off-by: Kumar Gala --- arch/powerpc/platforms/83xx/mpc832x_mds.c | 11 ----------- arch/powerpc/platforms/83xx/mpc834x_itx.c | 6 ------ arch/powerpc/platforms/83xx/mpc834x_mds.c | 6 ------ arch/powerpc/platforms/83xx/mpc8360e_pb.c | 11 ----------- 4 files changed, 34 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.c b/arch/powerpc/platforms/83xx/mpc832x_mds.c index c6bfe72893d4..71d9c0f17e47 100644 --- a/arch/powerpc/platforms/83xx/mpc832x_mds.c +++ b/arch/powerpc/platforms/83xx/mpc832x_mds.c @@ -118,17 +118,6 @@ static void __init mpc832x_sys_setup_arch(void) } #endif /* CONFIG_QUICC_ENGINE */ - -#ifdef CONFIG_BLK_DEV_INITRD - if (initrd_start) - ROOT_DEV = Root_RAM0; - else -#endif -#ifdef CONFIG_ROOT_NFS - ROOT_DEV = Root_NFS; -#else - ROOT_DEV = Root_HDA1; -#endif } static int __init mpc832x_declare_of_platform_devices(void) diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.c b/arch/powerpc/platforms/83xx/mpc834x_itx.c index a8f66fb3391a..0a708efa1f56 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_itx.c +++ b/arch/powerpc/platforms/83xx/mpc834x_itx.c @@ -71,12 +71,6 @@ static void __init mpc834x_itx_setup_arch(void) ppc_md.pci_exclude_device = mpc83xx_exclude_device; #endif - -#ifdef CONFIG_ROOT_NFS - ROOT_DEV = Root_NFS; -#else - ROOT_DEV = Root_HDA1; -#endif } static void __init mpc834x_itx_init_IRQ(void) diff --git a/arch/powerpc/platforms/83xx/mpc834x_mds.c b/arch/powerpc/platforms/83xx/mpc834x_mds.c index 9fd9adf8ff99..5a610485303b 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_mds.c +++ b/arch/powerpc/platforms/83xx/mpc834x_mds.c @@ -144,12 +144,6 @@ static void __init mpc834x_mds_setup_arch(void) #endif mpc834x_usb_cfg(); - -#ifdef CONFIG_ROOT_NFS - ROOT_DEV = Root_NFS; -#else - ROOT_DEV = Root_HDA1; -#endif } static void __init mpc834x_mds_init_IRQ(void) diff --git a/arch/powerpc/platforms/83xx/mpc8360e_pb.c b/arch/powerpc/platforms/83xx/mpc8360e_pb.c index 76fcb5bdb759..e39e17f9b920 100644 --- a/arch/powerpc/platforms/83xx/mpc8360e_pb.c +++ b/arch/powerpc/platforms/83xx/mpc8360e_pb.c @@ -128,17 +128,6 @@ static void __init mpc8360_sys_setup_arch(void) } #endif /* CONFIG_QUICC_ENGINE */ - -#ifdef CONFIG_BLK_DEV_INITRD - if (initrd_start) - ROOT_DEV = Root_RAM0; - else -#endif -#ifdef CONFIG_ROOT_NFS - ROOT_DEV = Root_NFS; -#else - ROOT_DEV = Root_HDA1; -#endif } static int __init mpc8360_declare_of_platform_devices(void) -- cgit v1.2.3 From 7c90c800d9a6c6393fa610313b6ed56ac786da93 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Sat, 17 Feb 2007 09:42:18 -0600 Subject: [POWERPC] 83xx: use default value of loops_per_jiffy Use the default value setup by initialization of loops_per_jiffy, its close enough for 83xx and will get fixed up by calibrate_delay(). Signed-off-by: Kumar Gala --- arch/powerpc/platforms/83xx/mpc832x_mds.c | 11 ----------- arch/powerpc/platforms/83xx/mpc834x_itx.c | 10 ---------- arch/powerpc/platforms/83xx/mpc834x_mds.c | 11 ----------- arch/powerpc/platforms/83xx/mpc8360e_pb.c | 11 ----------- 4 files changed, 43 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.c b/arch/powerpc/platforms/83xx/mpc832x_mds.c index 71d9c0f17e47..980d45c6bd35 100644 --- a/arch/powerpc/platforms/83xx/mpc832x_mds.c +++ b/arch/powerpc/platforms/83xx/mpc832x_mds.c @@ -69,17 +69,6 @@ static void __init mpc832x_sys_setup_arch(void) if (ppc_md.progress) ppc_md.progress("mpc832x_sys_setup_arch()", 0); - np = of_find_node_by_type(NULL, "cpu"); - if (np != 0) { - unsigned int *fp = - (int *)get_property(np, "clock-frequency", NULL); - if (fp != 0) - loops_per_jiffy = *fp / HZ; - else - loops_per_jiffy = 50000000 / HZ; - of_node_put(np); - } - /* Map BCSR area */ np = of_find_node_by_name(NULL, "bcsr"); if (np != 0) { diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.c b/arch/powerpc/platforms/83xx/mpc834x_itx.c index 0a708efa1f56..3c009f6d4a4f 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_itx.c +++ b/arch/powerpc/platforms/83xx/mpc834x_itx.c @@ -55,16 +55,6 @@ static void __init mpc834x_itx_setup_arch(void) if (ppc_md.progress) ppc_md.progress("mpc834x_itx_setup_arch()", 0); - np = of_find_node_by_type(NULL, "cpu"); - if (np != 0) { - const unsigned int *fp = - get_property(np, "clock-frequency", NULL); - if (fp != 0) - loops_per_jiffy = *fp / HZ; - else - loops_per_jiffy = 50000000 / HZ; - of_node_put(np); - } #ifdef CONFIG_PCI for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) add_bridge(np); diff --git a/arch/powerpc/platforms/83xx/mpc834x_mds.c b/arch/powerpc/platforms/83xx/mpc834x_mds.c index 5a610485303b..e5d819166874 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_mds.c +++ b/arch/powerpc/platforms/83xx/mpc834x_mds.c @@ -125,17 +125,6 @@ static void __init mpc834x_mds_setup_arch(void) if (ppc_md.progress) ppc_md.progress("mpc834x_mds_setup_arch()", 0); - np = of_find_node_by_type(NULL, "cpu"); - if (np != 0) { - const unsigned int *fp = - get_property(np, "clock-frequency", NULL); - if (fp != 0) - loops_per_jiffy = *fp / HZ; - else - loops_per_jiffy = 50000000 / HZ; - of_node_put(np); - } - #ifdef CONFIG_PCI for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) add_bridge(np); diff --git a/arch/powerpc/platforms/83xx/mpc8360e_pb.c b/arch/powerpc/platforms/83xx/mpc8360e_pb.c index e39e17f9b920..83f1c94274d0 100644 --- a/arch/powerpc/platforms/83xx/mpc8360e_pb.c +++ b/arch/powerpc/platforms/83xx/mpc8360e_pb.c @@ -79,17 +79,6 @@ static void __init mpc8360_sys_setup_arch(void) if (ppc_md.progress) ppc_md.progress("mpc8360_sys_setup_arch()", 0); - np = of_find_node_by_type(NULL, "cpu"); - if (np != 0) { - const unsigned int *fp = - get_property(np, "clock-frequency", NULL); - if (fp != 0) - loops_per_jiffy = *fp / HZ; - else - loops_per_jiffy = 50000000 / HZ; - of_node_put(np); - } - /* Map BCSR area */ np = of_find_node_by_name(NULL, "bcsr"); if (np != 0) { -- cgit v1.2.3 From f7993ed57ac06da168d29c587d1bc0dce0f11c78 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Sat, 17 Feb 2007 09:56:49 -0600 Subject: [POWERPC] 83xx: Use of_platform_bus_probe to setup QE devices Use of_platform_bus_probe to setup devices on the of_platform_bus since its much cleaner. We explicitly specify the bus ids since the we want to get rid of the default mechanism in the future. Signed-off-by: Kumar Gala --- arch/powerpc/platforms/83xx/mpc832x_mds.c | 22 +++++++++------------- arch/powerpc/platforms/83xx/mpc8360e_pb.c | 24 +++++++++++------------- 2 files changed, 20 insertions(+), 26 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.c b/arch/powerpc/platforms/83xx/mpc832x_mds.c index 980d45c6bd35..17e3a3c6d8b4 100644 --- a/arch/powerpc/platforms/83xx/mpc832x_mds.c +++ b/arch/powerpc/platforms/83xx/mpc832x_mds.c @@ -105,26 +105,23 @@ static void __init mpc832x_sys_setup_arch(void) iounmap(bcsr_regs); of_node_put(np); } - #endif /* CONFIG_QUICC_ENGINE */ } +static struct of_device_id mpc832x_ids[] = { + { .type = "soc", }, + { .compatible = "soc", }, + { .type = "qe", }, + {}, +}; + static int __init mpc832x_declare_of_platform_devices(void) { - struct device_node *np; - if (!machine_is(mpc832x_mds)) return 0; - for (np = NULL; (np = of_find_compatible_node(np, "network", - "ucc_geth")) != NULL;) { - int ucc_num; - char bus_id[BUS_ID_SIZE]; - - ucc_num = *((uint *) get_property(np, "device-id", NULL)) - 1; - snprintf(bus_id, BUS_ID_SIZE, "ucc_geth.%u", ucc_num); - of_platform_device_create(np, bus_id, NULL); - } + /* Publish the QE devices */ + of_platform_bus_probe(NULL, mpc832x_ids, NULL); return 0; } @@ -132,7 +129,6 @@ device_initcall(mpc832x_declare_of_platform_devices); static void __init mpc832x_sys_init_IRQ(void) { - struct device_node *np; np = of_find_node_by_type(NULL, "ipic"); diff --git a/arch/powerpc/platforms/83xx/mpc8360e_pb.c b/arch/powerpc/platforms/83xx/mpc8360e_pb.c index 83f1c94274d0..b25e6a116233 100644 --- a/arch/powerpc/platforms/83xx/mpc8360e_pb.c +++ b/arch/powerpc/platforms/83xx/mpc8360e_pb.c @@ -119,26 +119,24 @@ static void __init mpc8360_sys_setup_arch(void) #endif /* CONFIG_QUICC_ENGINE */ } -static int __init mpc8360_declare_of_platform_devices(void) -{ - struct device_node *np; +static struct of_device_id mpc836x_ids[] = { + { .type = "soc", }, + { .compatible = "soc", }, + { .type = "qe", }, + {}, +}; +static int __init mpc836x_declare_of_platform_devices(void) +{ if (!machine_is(mpc8360_sys)) return 0; - for (np = NULL; (np = of_find_compatible_node(np, "network", - "ucc_geth")) != NULL;) { - int ucc_num; - char bus_id[BUS_ID_SIZE]; - - ucc_num = *((uint *) get_property(np, "device-id", NULL)) - 1; - snprintf(bus_id, BUS_ID_SIZE, "ucc_geth.%u", ucc_num); - of_platform_device_create(np, bus_id, NULL); - } + /* Publish the QE devices */ + of_platform_bus_probe(NULL, mpc836x_ids, NULL); return 0; } -device_initcall(mpc8360_declare_of_platform_devices); +device_initcall(mpc836x_declare_of_platform_devices); static void __init mpc8360_sys_init_IRQ(void) { -- cgit v1.2.3 From 322d05a1c455266e522e8aa7010c40f390029b41 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Sat, 17 Feb 2007 10:13:56 -0600 Subject: [POWERPC] 83xx: Updated and renamed MPC8360PB to MPC836x MDS The MPC836x PB board is really just one part of the MPC836x MDS. We currently name all other PB boards as MDS. Removed all references to PB and replaced with MDS. Additionally renamed the .dts to match the defconfig (mpc836x_mds*). Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8360emds.dts | 363 --------- arch/powerpc/boot/dts/mpc836x_mds.dts | 363 +++++++++ arch/powerpc/configs/mpc8360emds_defconfig | 1082 --------------------------- arch/powerpc/configs/mpc836x_mds_defconfig | 1099 ++++++++++++++++++++++++++++ arch/powerpc/platforms/83xx/Kconfig | 8 +- arch/powerpc/platforms/83xx/Makefile | 2 +- arch/powerpc/platforms/83xx/mpc8360e_pb.c | 212 ------ arch/powerpc/platforms/83xx/mpc836x_mds.c | 206 ++++++ 8 files changed, 1673 insertions(+), 1662 deletions(-) delete mode 100644 arch/powerpc/boot/dts/mpc8360emds.dts create mode 100644 arch/powerpc/boot/dts/mpc836x_mds.dts delete mode 100644 arch/powerpc/configs/mpc8360emds_defconfig create mode 100644 arch/powerpc/configs/mpc836x_mds_defconfig delete mode 100644 arch/powerpc/platforms/83xx/mpc8360e_pb.c create mode 100644 arch/powerpc/platforms/83xx/mpc836x_mds.c (limited to 'arch') diff --git a/arch/powerpc/boot/dts/mpc8360emds.dts b/arch/powerpc/boot/dts/mpc8360emds.dts deleted file mode 100644 index 4fe45c021848..000000000000 --- a/arch/powerpc/boot/dts/mpc8360emds.dts +++ /dev/null @@ -1,363 +0,0 @@ -/* - * MPC8360E EMDS Device Tree Source - * - * Copyright 2006 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - - -/* -/memreserve/ 00000000 1000000; -*/ - -/ { - model = "MPC8360MDS"; - compatible = "MPC8360EMDS", "MPC836xMDS", "MPC83xxMDS"; - #address-cells = <1>; - #size-cells = <1>; - - cpus { - #cpus = <1>; - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,8360@0 { - device_type = "cpu"; - reg = <0>; - d-cache-line-size = <20>; // 32 bytes - i-cache-line-size = <20>; // 32 bytes - d-cache-size = <8000>; // L1, 32K - i-cache-size = <8000>; // L1, 32K - timebase-frequency = <3EF1480>; - bus-frequency = ; - clock-frequency = <1F78A400>; - 32-bit; - }; - }; - - memory { - device_type = "memory"; - reg = <00000000 10000000>; - }; - - bcsr@f8000000 { - device_type = "board-control"; - reg = ; - }; - - soc8360@e0000000 { - #address-cells = <1>; - #size-cells = <1>; - #interrupt-cells = <2>; - device_type = "soc"; - ranges = <0 e0000000 00100000>; - reg = ; - bus-frequency = ; - - wdt@200 { - device_type = "watchdog"; - compatible = "mpc83xx_wdt"; - reg = <200 100>; - }; - - i2c@3000 { - device_type = "i2c"; - compatible = "fsl-i2c"; - reg = <3000 100>; - interrupts = ; - interrupt-parent = < &ipic >; - dfsrr; - }; - - i2c@3100 { - device_type = "i2c"; - compatible = "fsl-i2c"; - reg = <3100 100>; - interrupts = ; - interrupt-parent = < &ipic >; - dfsrr; - }; - - serial@4500 { - device_type = "serial"; - compatible = "ns16550"; - reg = <4500 100>; - clock-frequency = ; - interrupts = <9 8>; - interrupt-parent = < &ipic >; - }; - - serial@4600 { - device_type = "serial"; - compatible = "ns16550"; - reg = <4600 100>; - clock-frequency = ; - interrupts = ; - interrupt-parent = < &ipic >; - }; - - crypto@30000 { - device_type = "crypto"; - model = "SEC2"; - compatible = "talitos"; - reg = <30000 10000>; - interrupts = ; - interrupt-parent = < &ipic >; - num-channels = <4>; - channel-fifo-len = <18>; - exec-units-mask = <0000007e>; - /* desc mask is for rev1.x, we need runtime fixup for >=2.x */ - descriptor-types-mask = <01010ebf>; - }; - - pci@8500 { - interrupt-map-mask = ; - interrupt-map = < - - /* IDSEL 0x11 AD17 */ - 8800 0 0 1 &ipic 14 8 - 8800 0 0 2 &ipic 15 8 - 8800 0 0 3 &ipic 16 8 - 8800 0 0 4 &ipic 17 8 - - /* IDSEL 0x12 AD18 */ - 9000 0 0 1 &ipic 16 8 - 9000 0 0 2 &ipic 17 8 - 9000 0 0 3 &ipic 14 8 - 9000 0 0 4 &ipic 15 8 - - /* IDSEL 0x13 AD19 */ - 9800 0 0 1 &ipic 17 8 - 9800 0 0 2 &ipic 14 8 - 9800 0 0 3 &ipic 15 8 - 9800 0 0 4 &ipic 16 8 - - /* IDSEL 0x15 AD21*/ - a800 0 0 1 &ipic 14 8 - a800 0 0 2 &ipic 15 8 - a800 0 0 3 &ipic 16 8 - a800 0 0 4 &ipic 17 8 - - /* IDSEL 0x16 AD22*/ - b000 0 0 1 &ipic 17 8 - b000 0 0 2 &ipic 14 8 - b000 0 0 3 &ipic 15 8 - b000 0 0 4 &ipic 16 8 - - /* IDSEL 0x17 AD23*/ - b800 0 0 1 &ipic 16 8 - b800 0 0 2 &ipic 17 8 - b800 0 0 3 &ipic 14 8 - b800 0 0 4 &ipic 15 8 - - /* IDSEL 0x18 AD24*/ - c000 0 0 1 &ipic 15 8 - c000 0 0 2 &ipic 16 8 - c000 0 0 3 &ipic 17 8 - c000 0 0 4 &ipic 14 8>; - interrupt-parent = < &ipic >; - interrupts = <42 8>; - bus-range = <0 0>; - ranges = <02000000 0 a0000000 a0000000 0 10000000 - 42000000 0 80000000 80000000 0 10000000 - 01000000 0 00000000 e2000000 0 00100000>; - clock-frequency = <3f940aa>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <8500 100>; - compatible = "83xx"; - device_type = "pci"; - }; - - ipic: pic@700 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <700 100>; - built-in; - device_type = "ipic"; - }; - - par_io@1400 { - reg = <1400 100>; - device_type = "par_io"; - num-ports = <7>; - - pio1: ucc_pin@01 { - pio-map = < - /* port pin dir open_drain assignment has_irq */ - 0 3 1 0 1 0 /* TxD0 */ - 0 4 1 0 1 0 /* TxD1 */ - 0 5 1 0 1 0 /* TxD2 */ - 0 6 1 0 1 0 /* TxD3 */ - 1 6 1 0 3 0 /* TxD4 */ - 1 7 1 0 1 0 /* TxD5 */ - 1 9 1 0 2 0 /* TxD6 */ - 1 a 1 0 2 0 /* TxD7 */ - 0 9 2 0 1 0 /* RxD0 */ - 0 a 2 0 1 0 /* RxD1 */ - 0 b 2 0 1 0 /* RxD2 */ - 0 c 2 0 1 0 /* RxD3 */ - 0 d 2 0 1 0 /* RxD4 */ - 1 1 2 0 2 0 /* RxD5 */ - 1 0 2 0 2 0 /* RxD6 */ - 1 4 2 0 2 0 /* RxD7 */ - 0 7 1 0 1 0 /* TX_EN */ - 0 8 1 0 1 0 /* TX_ER */ - 0 f 2 0 1 0 /* RX_DV */ - 0 10 2 0 1 0 /* RX_ER */ - 0 0 2 0 1 0 /* RX_CLK */ - 2 9 1 0 3 0 /* GTX_CLK - CLK10 */ - 2 8 2 0 1 0>; /* GTX125 - CLK9 */ - }; - pio2: ucc_pin@02 { - pio-map = < - /* port pin dir open_drain assignment has_irq */ - 0 11 1 0 1 0 /* TxD0 */ - 0 12 1 0 1 0 /* TxD1 */ - 0 13 1 0 1 0 /* TxD2 */ - 0 14 1 0 1 0 /* TxD3 */ - 1 2 1 0 1 0 /* TxD4 */ - 1 3 1 0 2 0 /* TxD5 */ - 1 5 1 0 3 0 /* TxD6 */ - 1 8 1 0 3 0 /* TxD7 */ - 0 17 2 0 1 0 /* RxD0 */ - 0 18 2 0 1 0 /* RxD1 */ - 0 19 2 0 1 0 /* RxD2 */ - 0 1a 2 0 1 0 /* RxD3 */ - 0 1b 2 0 1 0 /* RxD4 */ - 1 c 2 0 2 0 /* RxD5 */ - 1 d 2 0 3 0 /* RxD6 */ - 1 b 2 0 2 0 /* RxD7 */ - 0 15 1 0 1 0 /* TX_EN */ - 0 16 1 0 1 0 /* TX_ER */ - 0 1d 2 0 1 0 /* RX_DV */ - 0 1e 2 0 1 0 /* RX_ER */ - 0 1f 2 0 1 0 /* RX_CLK */ - 2 2 1 0 2 0 /* GTX_CLK - CLK10 */ - 2 3 2 0 1 0 /* GTX125 - CLK4 */ - 0 1 3 0 2 0 /* MDIO */ - 0 2 1 0 1 0>; /* MDC */ - }; - - }; - }; - - qe@e0100000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "qe"; - model = "QE"; - ranges = <0 e0100000 00100000>; - reg = ; - brg-frequency = <0>; - bus-frequency = <179A7B00>; - - muram@10000 { - device_type = "muram"; - ranges = <0 00010000 0000c000>; - - data-only@0{ - reg = <0 c000>; - }; - }; - - spi@4c0 { - device_type = "spi"; - compatible = "fsl_spi"; - reg = <4c0 40>; - interrupts = <2>; - interrupt-parent = < &qeic >; - mode = "cpu"; - }; - - spi@500 { - device_type = "spi"; - compatible = "fsl_spi"; - reg = <500 40>; - interrupts = <1>; - interrupt-parent = < &qeic >; - mode = "cpu"; - }; - - usb@6c0 { - device_type = "usb"; - compatible = "qe_udc"; - reg = <6c0 40 8B00 100>; - interrupts = ; - interrupt-parent = < &qeic >; - mode = "slave"; - }; - - ucc@2000 { - device_type = "network"; - compatible = "ucc_geth"; - model = "UCC"; - device-id = <1>; - reg = <2000 200>; - interrupts = <20>; - interrupt-parent = < &qeic >; - mac-address = [ 00 04 9f 00 23 23 ]; - rx-clock = <0>; - tx-clock = <19>; - phy-handle = < &phy0 >; - pio-handle = < &pio1 >; - }; - - ucc@3000 { - device_type = "network"; - compatible = "ucc_geth"; - model = "UCC"; - device-id = <2>; - reg = <3000 200>; - interrupts = <21>; - interrupt-parent = < &qeic >; - mac-address = [ 00 11 22 33 44 55 ]; - rx-clock = <0>; - tx-clock = <14>; - phy-handle = < &phy1 >; - pio-handle = < &pio2 >; - }; - - mdio@2120 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2120 18>; - device_type = "mdio"; - compatible = "ucc_geth_phy"; - - phy0: ethernet-phy@00 { - interrupt-parent = < &ipic >; - interrupts = <11 8>; - reg = <0>; - device_type = "ethernet-phy"; - interface = <6>; //ENET_1000_GMII - }; - phy1: ethernet-phy@01 { - interrupt-parent = < &ipic >; - interrupts = <12 8>; - reg = <1>; - device_type = "ethernet-phy"; - interface = <6>; - }; - }; - - qeic: qeic@80 { - interrupt-controller; - device_type = "qeic"; - #address-cells = <0>; - #interrupt-cells = <1>; - reg = <80 80>; - built-in; - big-endian; - interrupts = <20 8 21 8>; //high:32 low:33 - interrupt-parent = < &ipic >; - }; - - }; -}; diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts new file mode 100644 index 000000000000..4fe45c021848 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc836x_mds.dts @@ -0,0 +1,363 @@ +/* + * MPC8360E EMDS Device Tree Source + * + * Copyright 2006 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + + +/* +/memreserve/ 00000000 1000000; +*/ + +/ { + model = "MPC8360MDS"; + compatible = "MPC8360EMDS", "MPC836xMDS", "MPC83xxMDS"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8360@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <8000>; // L1, 32K + i-cache-size = <8000>; // L1, 32K + timebase-frequency = <3EF1480>; + bus-frequency = ; + clock-frequency = <1F78A400>; + 32-bit; + }; + }; + + memory { + device_type = "memory"; + reg = <00000000 10000000>; + }; + + bcsr@f8000000 { + device_type = "board-control"; + reg = ; + }; + + soc8360@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 e0000000 00100000>; + reg = ; + bus-frequency = ; + + wdt@200 { + device_type = "watchdog"; + compatible = "mpc83xx_wdt"; + reg = <200 100>; + }; + + i2c@3000 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3000 100>; + interrupts = ; + interrupt-parent = < &ipic >; + dfsrr; + }; + + i2c@3100 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3100 100>; + interrupts = ; + interrupt-parent = < &ipic >; + dfsrr; + }; + + serial@4500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4500 100>; + clock-frequency = ; + interrupts = <9 8>; + interrupt-parent = < &ipic >; + }; + + serial@4600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4600 100>; + clock-frequency = ; + interrupts = ; + interrupt-parent = < &ipic >; + }; + + crypto@30000 { + device_type = "crypto"; + model = "SEC2"; + compatible = "talitos"; + reg = <30000 10000>; + interrupts = ; + interrupt-parent = < &ipic >; + num-channels = <4>; + channel-fifo-len = <18>; + exec-units-mask = <0000007e>; + /* desc mask is for rev1.x, we need runtime fixup for >=2.x */ + descriptor-types-mask = <01010ebf>; + }; + + pci@8500 { + interrupt-map-mask = ; + interrupt-map = < + + /* IDSEL 0x11 AD17 */ + 8800 0 0 1 &ipic 14 8 + 8800 0 0 2 &ipic 15 8 + 8800 0 0 3 &ipic 16 8 + 8800 0 0 4 &ipic 17 8 + + /* IDSEL 0x12 AD18 */ + 9000 0 0 1 &ipic 16 8 + 9000 0 0 2 &ipic 17 8 + 9000 0 0 3 &ipic 14 8 + 9000 0 0 4 &ipic 15 8 + + /* IDSEL 0x13 AD19 */ + 9800 0 0 1 &ipic 17 8 + 9800 0 0 2 &ipic 14 8 + 9800 0 0 3 &ipic 15 8 + 9800 0 0 4 &ipic 16 8 + + /* IDSEL 0x15 AD21*/ + a800 0 0 1 &ipic 14 8 + a800 0 0 2 &ipic 15 8 + a800 0 0 3 &ipic 16 8 + a800 0 0 4 &ipic 17 8 + + /* IDSEL 0x16 AD22*/ + b000 0 0 1 &ipic 17 8 + b000 0 0 2 &ipic 14 8 + b000 0 0 3 &ipic 15 8 + b000 0 0 4 &ipic 16 8 + + /* IDSEL 0x17 AD23*/ + b800 0 0 1 &ipic 16 8 + b800 0 0 2 &ipic 17 8 + b800 0 0 3 &ipic 14 8 + b800 0 0 4 &ipic 15 8 + + /* IDSEL 0x18 AD24*/ + c000 0 0 1 &ipic 15 8 + c000 0 0 2 &ipic 16 8 + c000 0 0 3 &ipic 17 8 + c000 0 0 4 &ipic 14 8>; + interrupt-parent = < &ipic >; + interrupts = <42 8>; + bus-range = <0 0>; + ranges = <02000000 0 a0000000 a0000000 0 10000000 + 42000000 0 80000000 80000000 0 10000000 + 01000000 0 00000000 e2000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <8500 100>; + compatible = "83xx"; + device_type = "pci"; + }; + + ipic: pic@700 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <700 100>; + built-in; + device_type = "ipic"; + }; + + par_io@1400 { + reg = <1400 100>; + device_type = "par_io"; + num-ports = <7>; + + pio1: ucc_pin@01 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0 3 1 0 1 0 /* TxD0 */ + 0 4 1 0 1 0 /* TxD1 */ + 0 5 1 0 1 0 /* TxD2 */ + 0 6 1 0 1 0 /* TxD3 */ + 1 6 1 0 3 0 /* TxD4 */ + 1 7 1 0 1 0 /* TxD5 */ + 1 9 1 0 2 0 /* TxD6 */ + 1 a 1 0 2 0 /* TxD7 */ + 0 9 2 0 1 0 /* RxD0 */ + 0 a 2 0 1 0 /* RxD1 */ + 0 b 2 0 1 0 /* RxD2 */ + 0 c 2 0 1 0 /* RxD3 */ + 0 d 2 0 1 0 /* RxD4 */ + 1 1 2 0 2 0 /* RxD5 */ + 1 0 2 0 2 0 /* RxD6 */ + 1 4 2 0 2 0 /* RxD7 */ + 0 7 1 0 1 0 /* TX_EN */ + 0 8 1 0 1 0 /* TX_ER */ + 0 f 2 0 1 0 /* RX_DV */ + 0 10 2 0 1 0 /* RX_ER */ + 0 0 2 0 1 0 /* RX_CLK */ + 2 9 1 0 3 0 /* GTX_CLK - CLK10 */ + 2 8 2 0 1 0>; /* GTX125 - CLK9 */ + }; + pio2: ucc_pin@02 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0 11 1 0 1 0 /* TxD0 */ + 0 12 1 0 1 0 /* TxD1 */ + 0 13 1 0 1 0 /* TxD2 */ + 0 14 1 0 1 0 /* TxD3 */ + 1 2 1 0 1 0 /* TxD4 */ + 1 3 1 0 2 0 /* TxD5 */ + 1 5 1 0 3 0 /* TxD6 */ + 1 8 1 0 3 0 /* TxD7 */ + 0 17 2 0 1 0 /* RxD0 */ + 0 18 2 0 1 0 /* RxD1 */ + 0 19 2 0 1 0 /* RxD2 */ + 0 1a 2 0 1 0 /* RxD3 */ + 0 1b 2 0 1 0 /* RxD4 */ + 1 c 2 0 2 0 /* RxD5 */ + 1 d 2 0 3 0 /* RxD6 */ + 1 b 2 0 2 0 /* RxD7 */ + 0 15 1 0 1 0 /* TX_EN */ + 0 16 1 0 1 0 /* TX_ER */ + 0 1d 2 0 1 0 /* RX_DV */ + 0 1e 2 0 1 0 /* RX_ER */ + 0 1f 2 0 1 0 /* RX_CLK */ + 2 2 1 0 2 0 /* GTX_CLK - CLK10 */ + 2 3 2 0 1 0 /* GTX125 - CLK4 */ + 0 1 3 0 2 0 /* MDIO */ + 0 2 1 0 1 0>; /* MDC */ + }; + + }; + }; + + qe@e0100000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "qe"; + model = "QE"; + ranges = <0 e0100000 00100000>; + reg = ; + brg-frequency = <0>; + bus-frequency = <179A7B00>; + + muram@10000 { + device_type = "muram"; + ranges = <0 00010000 0000c000>; + + data-only@0{ + reg = <0 c000>; + }; + }; + + spi@4c0 { + device_type = "spi"; + compatible = "fsl_spi"; + reg = <4c0 40>; + interrupts = <2>; + interrupt-parent = < &qeic >; + mode = "cpu"; + }; + + spi@500 { + device_type = "spi"; + compatible = "fsl_spi"; + reg = <500 40>; + interrupts = <1>; + interrupt-parent = < &qeic >; + mode = "cpu"; + }; + + usb@6c0 { + device_type = "usb"; + compatible = "qe_udc"; + reg = <6c0 40 8B00 100>; + interrupts = ; + interrupt-parent = < &qeic >; + mode = "slave"; + }; + + ucc@2000 { + device_type = "network"; + compatible = "ucc_geth"; + model = "UCC"; + device-id = <1>; + reg = <2000 200>; + interrupts = <20>; + interrupt-parent = < &qeic >; + mac-address = [ 00 04 9f 00 23 23 ]; + rx-clock = <0>; + tx-clock = <19>; + phy-handle = < &phy0 >; + pio-handle = < &pio1 >; + }; + + ucc@3000 { + device_type = "network"; + compatible = "ucc_geth"; + model = "UCC"; + device-id = <2>; + reg = <3000 200>; + interrupts = <21>; + interrupt-parent = < &qeic >; + mac-address = [ 00 11 22 33 44 55 ]; + rx-clock = <0>; + tx-clock = <14>; + phy-handle = < &phy1 >; + pio-handle = < &pio2 >; + }; + + mdio@2120 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2120 18>; + device_type = "mdio"; + compatible = "ucc_geth_phy"; + + phy0: ethernet-phy@00 { + interrupt-parent = < &ipic >; + interrupts = <11 8>; + reg = <0>; + device_type = "ethernet-phy"; + interface = <6>; //ENET_1000_GMII + }; + phy1: ethernet-phy@01 { + interrupt-parent = < &ipic >; + interrupts = <12 8>; + reg = <1>; + device_type = "ethernet-phy"; + interface = <6>; + }; + }; + + qeic: qeic@80 { + interrupt-controller; + device_type = "qeic"; + #address-cells = <0>; + #interrupt-cells = <1>; + reg = <80 80>; + built-in; + big-endian; + interrupts = <20 8 21 8>; //high:32 low:33 + interrupt-parent = < &ipic >; + }; + + }; +}; diff --git a/arch/powerpc/configs/mpc8360emds_defconfig b/arch/powerpc/configs/mpc8360emds_defconfig deleted file mode 100644 index bbe38ccc3d86..000000000000 --- a/arch/powerpc/configs/mpc8360emds_defconfig +++ /dev/null @@ -1,1082 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.20-rc5 -# Fri Jan 26 00:19:45 2007 -# -# CONFIG_PPC64 is not set -CONFIG_PPC32=y -CONFIG_PPC_MERGE=y -CONFIG_MMU=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_IRQ_PER_CPU=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_ARCH_HAS_ILOG2_U32=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_PPC=y -CONFIG_EARLY_PRINTK=y -CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_PPC_OF=y -CONFIG_PPC_UDBG_16550=y -# CONFIG_GENERIC_TBSYNC is not set -CONFIG_AUDIT_ARCH=y -CONFIG_GENERIC_BUG=y -CONFIG_DEFAULT_UIMAGE=y - -# -# Processor support -# -# CONFIG_CLASSIC32 is not set -# CONFIG_PPC_82xx is not set -CONFIG_PPC_83xx=y -# CONFIG_PPC_85xx is not set -# CONFIG_PPC_86xx is not set -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_8xx is not set -# CONFIG_E200 is not set -CONFIG_6xx=y -CONFIG_83xx=y -CONFIG_PPC_FPU=y -# CONFIG_PPC_DCR_NATIVE is not set -# CONFIG_PPC_DCR_MMIO is not set -CONFIG_PPC_STD_MMU=y -CONFIG_PPC_STD_MMU_32=y -# CONFIG_SMP is not set -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set -# CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set -CONFIG_SYSFS_DEPRECATED=y -# CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -# CONFIG_KALLSYMS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -# CONFIG_EPOLL is not set -CONFIG_SHMEM=y -CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set - -# -# Block layer -# -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_QUICC_ENGINE=y -CONFIG_PPC_GEN550=y -# CONFIG_WANT_EARLY_SERIAL is not set - -# -# Platform support -# -# CONFIG_MPC832x_MDS is not set -# CONFIG_MPC834x_SYS is not set -# CONFIG_MPC834x_ITX is not set -CONFIG_MPC8360E_PB=y -CONFIG_PPC_MPC836x=y -# CONFIG_MPIC is not set - -# -# Kernel options -# -# CONFIG_HIGHMEM is not set -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_300 is not set -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_PROC_DEVICETREE=y -# CONFIG_CMDLINE_BOOL is not set -# CONFIG_PM is not set -CONFIG_SECCOMP=y -CONFIG_ISA_DMA_API=y - -# -# Bus options -# -CONFIG_GENERIC_ISA_DMA=y -# CONFIG_MPIC_WEIRD is not set -# CONFIG_PPC_I8259 is not set -CONFIG_PPC_INDIRECT_PCI=y -CONFIG_FSL_SOC=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -# CONFIG_PCIEPORTBUS is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_BOOT_LOAD=0x00800000 - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -# CONFIG_NETDEBUG is not set -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set -# CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=32768 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# -# CONFIG_SGI_IOC4 is not set -# CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -# CONFIG_SCSI_TGT is not set -# CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -# CONFIG_BLK_DEV_SD is not set -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -# CONFIG_BLK_DEV_SR is not set -# CONFIG_CHR_DEV_SG is not set -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set -# CONFIG_SCSI_SCAN_ASYNC is not set - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# -# CONFIG_ISCSI_TCP is not set -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_AIC94XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_ARCMSR is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_STEX is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_QLA_ISCSI is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_SRP is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# -# CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# -# CONFIG_MAC_EMUMOUSEBTN is not set -# CONFIG_WINDFARM is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -# CONFIG_NET_PCI is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -# CONFIG_GIANFAR is not set -CONFIG_UCC_GETH=y -# CONFIG_UGETH_NAPI is not set -# CONFIG_UGETH_MAGIC_PACKET is not set -# CONFIG_UGETH_FILTERING is not set -# CONFIG_UGETH_TX_ON_DEMOND is not set -# CONFIG_QLA3XXX is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set -# CONFIG_MYRI10GE is not set -# CONFIG_NETXEN_NIC is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_PCI=y -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -# CONFIG_SERIAL_UARTLITE is not set -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_83xx_WDT=y - -# -# PCI-based Watchdog Cards -# -# CONFIG_PCIPCWATCHDOG is not set -# CONFIG_WDTPCI is not set -CONFIG_HW_RANDOM=y -# CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_MPC=y -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_M41T00 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_PC87427 is not set -# CONFIG_SENSORS_SIS5595 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47M192 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_VT1211 is not set -# CONFIG_SENSORS_VT8231 is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83791D is not set -# CONFIG_SENSORS_W83792D is not set -# CONFIG_SENSORS_W83793 is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -CONFIG_FIRMWARE_EDID=y -# CONFIG_FB is not set -# CONFIG_FB_IBM_GXT4500 is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# HID Devices -# -CONFIG_HID=y - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB_ARCH_HAS_EHCI=y -# CONFIG_USB is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# -# CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Virtualization -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=y -CONFIG_RPCSEC_GSS_KRB5=y -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -# CONFIG_MSDOS_PARTITION is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# Distributed Lock Manager -# -# CONFIG_DLM is not set - -# -# QE Options -# -CONFIG_UCC_SLOW=y -CONFIG_UCC_FAST=y -CONFIG_UCC=y - -# -# Library routines -# -CONFIG_BITREVERSE=y -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y -CONFIG_IOMAP_COPY=y - -# -# Instrumentation Support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_MUST_CHECK=y -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_BOOTX_TEXT is not set -# CONFIG_SERIAL_TEXT_DEBUG is not set -# CONFIG_PPC_EARLY_DEBUG is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_MANAGER=y -# CONFIG_CRYPTO_HMAC is not set -# CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=y -# CONFIG_CRYPTO_SHA1 is not set -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -# CONFIG_CRYPTO_LRW is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# diff --git a/arch/powerpc/configs/mpc836x_mds_defconfig b/arch/powerpc/configs/mpc836x_mds_defconfig new file mode 100644 index 000000000000..8eb475cd0df0 --- /dev/null +++ b/arch/powerpc/configs/mpc836x_mds_defconfig @@ -0,0 +1,1099 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.20 +# Sat Feb 17 10:09:26 2007 +# +# CONFIG_PPC64 is not set +CONFIG_PPC32=y +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +CONFIG_DEFAULT_UIMAGE=y + +# +# Processor support +# +# CONFIG_CLASSIC32 is not set +# CONFIG_PPC_82xx is not set +CONFIG_PPC_83xx=y +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_86xx is not set +# CONFIG_PPC_8xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_6xx=y +CONFIG_83xx=y +CONFIG_PPC_FPU=y +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_PPC_STD_MMU=y +CONFIG_PPC_STD_MMU_32=y +# CONFIG_SMP is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +# CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +# CONFIG_EPOLL is not set +CONFIG_SHMEM=y +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_QUICC_ENGINE=y +CONFIG_PPC_GEN550=y +# CONFIG_WANT_EARLY_SERIAL is not set + +# +# Platform support +# +# CONFIG_MPC8313_RDB is not set +# CONFIG_MPC832x_MDS is not set +# CONFIG_MPC834x_MDS is not set +# CONFIG_MPC834x_ITX is not set +CONFIG_MPC836x_MDS=y +CONFIG_PPC_MPC836x=y +# CONFIG_MPIC is not set + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_ISA_DMA=y +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_FSL_SOC=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PCIEPORTBUS is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_BOOT_LOAD=0x00800000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=32768 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +# CONFIG_BLK_DEV_SD is not set +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# +# CONFIG_MAC_EMUMOUSEBTN is not set +# CONFIG_WINDFARM is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_NET_PCI is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_GIANFAR is not set +CONFIG_UCC_GETH=y +# CONFIG_UGETH_NAPI is not set +# CONFIG_UGETH_MAGIC_PACKET is not set +# CONFIG_UGETH_FILTERING is not set +# CONFIG_UGETH_TX_ON_DEMOND is not set +# CONFIG_QLA3XXX is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_OF_PLATFORM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_83xx_WDT=y + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +CONFIG_I2C_MPC=y +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PASEMI is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_M41T00 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB is not set +# CONFIG_FB_IBM_GXT4500 is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# HID Devices +# +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# Auxiliary Display support +# + +# +# Virtualization +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +# CONFIG_MSDOS_PARTITION is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# QE Options +# +CONFIG_UCC_SLOW=y +CONFIG_UCC_FAST=y +CONFIG_UCC=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y + +# +# Instrumentation Support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_BOOTX_TEXT is not set +# CONFIG_SERIAL_TEXT_DEBUG is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig index 1aea1e69ff31..713b31a16ce9 100644 --- a/arch/powerpc/platforms/83xx/Kconfig +++ b/arch/powerpc/platforms/83xx/Kconfig @@ -38,12 +38,12 @@ config MPC834x_ITX Be aware that PCI initialization is the bootloader's responsibility. -config MPC8360E_PB - bool "Freescale MPC8360E PB" +config MPC836x_MDS + bool "Freescale MPC836x MDS" select DEFAULT_UIMAGE select QUICC_ENGINE help - This option enables support for the MPC836x EMDS Processor Board. + This option enables support for the MPC836x MDS Processor Board. endchoice @@ -69,6 +69,6 @@ config PPC_MPC836x bool select PPC_UDBG_16550 select PPC_INDIRECT_PCI - default y if MPC8360E_PB + default y if MPC836x_MDS endmenu diff --git a/arch/powerpc/platforms/83xx/Makefile b/arch/powerpc/platforms/83xx/Makefile index 6c8199c4c382..dfc970d0df10 100644 --- a/arch/powerpc/platforms/83xx/Makefile +++ b/arch/powerpc/platforms/83xx/Makefile @@ -6,5 +6,5 @@ obj-$(CONFIG_PCI) += pci.o obj-$(CONFIG_MPC8313_RDB) += mpc8313_rdb.o obj-$(CONFIG_MPC834x_MDS) += mpc834x_mds.o obj-$(CONFIG_MPC834x_ITX) += mpc834x_itx.o -obj-$(CONFIG_MPC8360E_PB) += mpc8360e_pb.o +obj-$(CONFIG_MPC836x_MDS) += mpc836x_mds.o obj-$(CONFIG_MPC832x_MDS) += mpc832x_mds.o diff --git a/arch/powerpc/platforms/83xx/mpc8360e_pb.c b/arch/powerpc/platforms/83xx/mpc8360e_pb.c deleted file mode 100644 index b25e6a116233..000000000000 --- a/arch/powerpc/platforms/83xx/mpc8360e_pb.c +++ /dev/null @@ -1,212 +0,0 @@ -/* - * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved. - * - * Author: Li Yang - * Yin Olivia - * - * Description: - * MPC8360E MDS PB board specific routines. - * - * Changelog: - * Jun 21, 2006 Initial version - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "mpc83xx.h" - -#undef DEBUG -#ifdef DEBUG -#define DBG(fmt...) udbg_printf(fmt) -#else -#define DBG(fmt...) -#endif - -#ifndef CONFIG_PCI -unsigned long isa_io_base = 0; -unsigned long isa_mem_base = 0; -#endif - -static u8 *bcsr_regs = NULL; - -u8 *get_bcsr(void) -{ - return bcsr_regs; -} - -/* ************************************************************************ - * - * Setup the architecture - * - */ -static void __init mpc8360_sys_setup_arch(void) -{ - struct device_node *np; - - if (ppc_md.progress) - ppc_md.progress("mpc8360_sys_setup_arch()", 0); - - /* Map BCSR area */ - np = of_find_node_by_name(NULL, "bcsr"); - if (np != 0) { - struct resource res; - - of_address_to_resource(np, 0, &res); - bcsr_regs = ioremap(res.start, res.end - res.start +1); - of_node_put(np); - } - -#ifdef CONFIG_PCI - for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) - add_bridge(np); - ppc_md.pci_exclude_device = mpc83xx_exclude_device; -#endif - -#ifdef CONFIG_QUICC_ENGINE - qe_reset(); - - if ((np = of_find_node_by_name(NULL, "par_io")) != NULL) { - par_io_init(np); - of_node_put(np); - - for (np = NULL; (np = of_find_node_by_name(np, "ucc")) != NULL;) - par_io_of_config(np); - } - - if ((np = of_find_compatible_node(NULL, "network", "ucc_geth")) - != NULL){ - /* Reset the Ethernet PHY */ - bcsr_regs[9] &= ~0x20; - udelay(1000); - bcsr_regs[9] |= 0x20; - iounmap(bcsr_regs); - of_node_put(np); - } - -#endif /* CONFIG_QUICC_ENGINE */ -} - -static struct of_device_id mpc836x_ids[] = { - { .type = "soc", }, - { .compatible = "soc", }, - { .type = "qe", }, - {}, -}; - -static int __init mpc836x_declare_of_platform_devices(void) -{ - if (!machine_is(mpc8360_sys)) - return 0; - - /* Publish the QE devices */ - of_platform_bus_probe(NULL, mpc836x_ids, NULL); - - return 0; -} -device_initcall(mpc836x_declare_of_platform_devices); - -static void __init mpc8360_sys_init_IRQ(void) -{ - - struct device_node *np; - - np = of_find_node_by_type(NULL, "ipic"); - if (!np) - return; - - ipic_init(np, 0); - - /* Initialize the default interrupt mapping priorities, - * in case the boot rom changed something on us. - */ - ipic_set_default_priority(); - of_node_put(np); - -#ifdef CONFIG_QUICC_ENGINE - np = of_find_node_by_type(NULL, "qeic"); - if (!np) - return; - - qe_ic_init(np, 0); - of_node_put(np); -#endif /* CONFIG_QUICC_ENGINE */ -} - -#if defined(CONFIG_I2C_MPC) && defined(CONFIG_SENSORS_DS1374) -extern ulong ds1374_get_rtc_time(void); -extern int ds1374_set_rtc_time(ulong); - -static int __init mpc8360_rtc_hookup(void) -{ - struct timespec tv; - - if (!machine_is(mpc8360_sys)) - return 0; - - ppc_md.get_rtc_time = ds1374_get_rtc_time; - ppc_md.set_rtc_time = ds1374_set_rtc_time; - - tv.tv_nsec = 0; - tv.tv_sec = (ppc_md.get_rtc_time) (); - do_settimeofday(&tv); - - return 0; -} - -late_initcall(mpc8360_rtc_hookup); -#endif - -/* - * Called very early, MMU is off, device-tree isn't unflattened - */ -static int __init mpc8360_sys_probe(void) -{ - unsigned long root = of_get_flat_dt_root(); - - return of_flat_dt_is_compatible(root, "MPC836xMDS"); -} - -define_machine(mpc8360_sys) { - .name = "MPC8360E PB", - .probe = mpc8360_sys_probe, - .setup_arch = mpc8360_sys_setup_arch, - .init_IRQ = mpc8360_sys_init_IRQ, - .get_irq = ipic_get_irq, - .restart = mpc83xx_restart, - .time_init = mpc83xx_time_init, - .calibrate_decr = generic_calibrate_decr, - .progress = udbg_progress, -}; diff --git a/arch/powerpc/platforms/83xx/mpc836x_mds.c b/arch/powerpc/platforms/83xx/mpc836x_mds.c new file mode 100644 index 000000000000..526ed090a446 --- /dev/null +++ b/arch/powerpc/platforms/83xx/mpc836x_mds.c @@ -0,0 +1,206 @@ +/* + * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved. + * + * Author: Li Yang + * Yin Olivia + * + * Description: + * MPC8360E MDS board specific routines. + * + * Changelog: + * Jun 21, 2006 Initial version + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "mpc83xx.h" + +#undef DEBUG +#ifdef DEBUG +#define DBG(fmt...) udbg_printf(fmt) +#else +#define DBG(fmt...) +#endif + +#ifndef CONFIG_PCI +unsigned long isa_io_base = 0; +unsigned long isa_mem_base = 0; +#endif + +static u8 *bcsr_regs = NULL; + +/* ************************************************************************ + * + * Setup the architecture + * + */ +static void __init mpc836x_mds_setup_arch(void) +{ + struct device_node *np; + + if (ppc_md.progress) + ppc_md.progress("mpc836x_mds_setup_arch()", 0); + + /* Map BCSR area */ + np = of_find_node_by_name(NULL, "bcsr"); + if (np != 0) { + struct resource res; + + of_address_to_resource(np, 0, &res); + bcsr_regs = ioremap(res.start, res.end - res.start +1); + of_node_put(np); + } + +#ifdef CONFIG_PCI + for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) + add_bridge(np); + ppc_md.pci_exclude_device = mpc83xx_exclude_device; +#endif + +#ifdef CONFIG_QUICC_ENGINE + qe_reset(); + + if ((np = of_find_node_by_name(NULL, "par_io")) != NULL) { + par_io_init(np); + of_node_put(np); + + for (np = NULL; (np = of_find_node_by_name(np, "ucc")) != NULL;) + par_io_of_config(np); + } + + if ((np = of_find_compatible_node(NULL, "network", "ucc_geth")) + != NULL){ + /* Reset the Ethernet PHY */ + bcsr_regs[9] &= ~0x20; + udelay(1000); + bcsr_regs[9] |= 0x20; + iounmap(bcsr_regs); + of_node_put(np); + } + +#endif /* CONFIG_QUICC_ENGINE */ +} + +static struct of_device_id mpc836x_ids[] = { + { .type = "soc", }, + { .compatible = "soc", }, + { .type = "qe", }, + {}, +}; + +static int __init mpc836x_declare_of_platform_devices(void) +{ + if (!machine_is(mpc836x_mds)) + return 0; + + /* Publish the QE devices */ + of_platform_bus_probe(NULL, mpc836x_ids, NULL); + + return 0; +} +device_initcall(mpc836x_declare_of_platform_devices); + +static void __init mpc836x_mds_init_IRQ(void) +{ + struct device_node *np; + + np = of_find_node_by_type(NULL, "ipic"); + if (!np) + return; + + ipic_init(np, 0); + + /* Initialize the default interrupt mapping priorities, + * in case the boot rom changed something on us. + */ + ipic_set_default_priority(); + of_node_put(np); + +#ifdef CONFIG_QUICC_ENGINE + np = of_find_node_by_type(NULL, "qeic"); + if (!np) + return; + + qe_ic_init(np, 0); + of_node_put(np); +#endif /* CONFIG_QUICC_ENGINE */ +} + +#if defined(CONFIG_I2C_MPC) && defined(CONFIG_SENSORS_DS1374) +extern ulong ds1374_get_rtc_time(void); +extern int ds1374_set_rtc_time(ulong); + +static int __init mpc8360_rtc_hookup(void) +{ + struct timespec tv; + + if (!machine_is(mpc836x_mds)) + return 0; + + ppc_md.get_rtc_time = ds1374_get_rtc_time; + ppc_md.set_rtc_time = ds1374_set_rtc_time; + + tv.tv_nsec = 0; + tv.tv_sec = (ppc_md.get_rtc_time) (); + do_settimeofday(&tv); + + return 0; +} + +late_initcall(mpc8360_rtc_hookup); +#endif + +/* + * Called very early, MMU is off, device-tree isn't unflattened + */ +static int __init mpc836x_mds_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "MPC836xMDS"); +} + +define_machine(mpc836x_mds) { + .name = "MPC836x MDS", + .probe = mpc836x_mds_probe, + .setup_arch = mpc836x_mds_setup_arch, + .init_IRQ = mpc836x_mds_init_IRQ, + .get_irq = ipic_get_irq, + .restart = mpc83xx_restart, + .time_init = mpc83xx_time_init, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; -- cgit v1.2.3 From be156bed9ebfe365c6d95f715eae3529cf694fcb Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Sat, 17 Feb 2007 10:16:18 -0600 Subject: [POWERPC] 83xx: Renamed MPC8323 MDS dts and defconfig to match other boards Renamed the MPC8323 MDS and defconfig to match the naming convention followed by other MDS boards. Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8323emds.dts | 333 --------- arch/powerpc/boot/dts/mpc832x_mds.dts | 333 +++++++++ arch/powerpc/configs/mpc832x_mds_defconfig | 1083 ++++++++++++++++++++++++++++ arch/powerpc/configs/mpc832xemds_defconfig | 1083 ---------------------------- 4 files changed, 1416 insertions(+), 1416 deletions(-) delete mode 100644 arch/powerpc/boot/dts/mpc8323emds.dts create mode 100644 arch/powerpc/boot/dts/mpc832x_mds.dts create mode 100644 arch/powerpc/configs/mpc832x_mds_defconfig delete mode 100644 arch/powerpc/configs/mpc832xemds_defconfig (limited to 'arch') diff --git a/arch/powerpc/boot/dts/mpc8323emds.dts b/arch/powerpc/boot/dts/mpc8323emds.dts deleted file mode 100644 index 06b310698a02..000000000000 --- a/arch/powerpc/boot/dts/mpc8323emds.dts +++ /dev/null @@ -1,333 +0,0 @@ -/* - * MPC8323E EMDS Device Tree Source - * - * Copyright 2006 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -/ { - model = "MPC8323EMDS"; - compatible = "MPC8323EMDS", "MPC832xMDS", "MPC83xxMDS"; - #address-cells = <1>; - #size-cells = <1>; - - cpus { - #cpus = <1>; - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,8323@0 { - device_type = "cpu"; - reg = <0>; - d-cache-line-size = <20>; // 32 bytes - i-cache-line-size = <20>; // 32 bytes - d-cache-size = <4000>; // L1, 16K - i-cache-size = <4000>; // L1, 16K - timebase-frequency = <0>; - bus-frequency = <0>; - clock-frequency = <0>; - 32-bit; - }; - }; - - memory { - device_type = "memory"; - reg = <00000000 08000000>; - }; - - bcsr@f8000000 { - device_type = "board-control"; - reg = ; - }; - - soc8323@e0000000 { - #address-cells = <1>; - #size-cells = <1>; - #interrupt-cells = <2>; - device_type = "soc"; - ranges = <0 e0000000 00100000>; - reg = ; - bus-frequency = <7DE2900>; - - wdt@200 { - device_type = "watchdog"; - compatible = "mpc83xx_wdt"; - reg = <200 100>; - }; - - i2c@3000 { - device_type = "i2c"; - compatible = "fsl-i2c"; - reg = <3000 100>; - interrupts = ; - interrupt-parent = < &ipic >; - dfsrr; - }; - - serial@4500 { - device_type = "serial"; - compatible = "ns16550"; - reg = <4500 100>; - clock-frequency = <0>; - interrupts = <9 8>; - interrupt-parent = < &ipic >; - }; - - serial@4600 { - device_type = "serial"; - compatible = "ns16550"; - reg = <4600 100>; - clock-frequency = <0>; - interrupts = ; - interrupt-parent = < &ipic >; - }; - - crypto@30000 { - device_type = "crypto"; - model = "SEC2"; - compatible = "talitos"; - reg = <30000 7000>; - interrupts = ; - interrupt-parent = < &ipic >; - /* Rev. 2.2 */ - num-channels = <1>; - channel-fifo-len = <18>; - exec-units-mask = <0000004c>; - descriptor-types-mask = <0122003f>; - }; - - pci@8500 { - interrupt-map-mask = ; - interrupt-map = < - /* IDSEL 0x11 AD17 */ - 8800 0 0 1 &ipic 14 8 - 8800 0 0 2 &ipic 15 8 - 8800 0 0 3 &ipic 16 8 - 8800 0 0 4 &ipic 17 8 - - /* IDSEL 0x12 AD18 */ - 9000 0 0 1 &ipic 16 8 - 9000 0 0 2 &ipic 17 8 - 9000 0 0 3 &ipic 14 8 - 9000 0 0 4 &ipic 15 8 - - /* IDSEL 0x13 AD19 */ - 9800 0 0 1 &ipic 17 8 - 9800 0 0 2 &ipic 14 8 - 9800 0 0 3 &ipic 15 8 - 9800 0 0 4 &ipic 16 8 - - /* IDSEL 0x15 AD21*/ - a800 0 0 1 &ipic 14 8 - a800 0 0 2 &ipic 15 8 - a800 0 0 3 &ipic 16 8 - a800 0 0 4 &ipic 17 8 - - /* IDSEL 0x16 AD22*/ - b000 0 0 1 &ipic 17 8 - b000 0 0 2 &ipic 14 8 - b000 0 0 3 &ipic 15 8 - b000 0 0 4 &ipic 16 8 - - /* IDSEL 0x17 AD23*/ - b800 0 0 1 &ipic 16 8 - b800 0 0 2 &ipic 17 8 - b800 0 0 3 &ipic 14 8 - b800 0 0 4 &ipic 15 8 - - /* IDSEL 0x18 AD24*/ - c000 0 0 1 &ipic 15 8 - c000 0 0 2 &ipic 16 8 - c000 0 0 3 &ipic 17 8 - c000 0 0 4 &ipic 14 8>; - interrupt-parent = < &ipic >; - interrupts = <42 8>; - bus-range = <0 0>; - ranges = <02000000 0 a0000000 90000000 0 10000000 - 42000000 0 80000000 80000000 0 10000000 - 01000000 0 00000000 d0000000 0 00100000>; - clock-frequency = <0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <8500 100>; - compatible = "83xx"; - device_type = "pci"; - }; - - ipic: pic@700 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <700 100>; - built-in; - device_type = "ipic"; - }; - - par_io@1400 { - reg = <1400 100>; - device_type = "par_io"; - num-ports = <7>; - - pio3: ucc_pin@03 { - pio-map = < - /* port pin dir open_drain assignment has_irq */ - 3 4 3 0 2 0 /* MDIO */ - 3 5 1 0 2 0 /* MDC */ - 0 d 2 0 1 0 /* RX_CLK (CLK9) */ - 3 18 2 0 1 0 /* TX_CLK (CLK10) */ - 1 1 1 0 1 0 /* TxD1 */ - 1 0 1 0 1 0 /* TxD0 */ - 1 1 1 0 1 0 /* TxD1 */ - 1 2 1 0 1 0 /* TxD2 */ - 1 3 1 0 1 0 /* TxD3 */ - 1 4 2 0 1 0 /* RxD0 */ - 1 5 2 0 1 0 /* RxD1 */ - 1 6 2 0 1 0 /* RxD2 */ - 1 7 2 0 1 0 /* RxD3 */ - 1 8 2 0 1 0 /* RX_ER */ - 1 9 1 0 1 0 /* TX_ER */ - 1 a 2 0 1 0 /* RX_DV */ - 1 b 2 0 1 0 /* COL */ - 1 c 1 0 1 0 /* TX_EN */ - 1 d 2 0 1 0>;/* CRS */ - }; - pio4: ucc_pin@04 { - pio-map = < - /* port pin dir open_drain assignment has_irq */ - 3 1f 2 0 1 0 /* RX_CLK (CLK7) */ - 3 6 2 0 1 0 /* TX_CLK (CLK8) */ - 1 12 1 0 1 0 /* TxD0 */ - 1 13 1 0 1 0 /* TxD1 */ - 1 14 1 0 1 0 /* TxD2 */ - 1 15 1 0 1 0 /* TxD3 */ - 1 16 2 0 1 0 /* RxD0 */ - 1 17 2 0 1 0 /* RxD1 */ - 1 18 2 0 1 0 /* RxD2 */ - 1 19 2 0 1 0 /* RxD3 */ - 1 1a 2 0 1 0 /* RX_ER */ - 1 1b 1 0 1 0 /* TX_ER */ - 1 1c 2 0 1 0 /* RX_DV */ - 1 1d 2 0 1 0 /* COL */ - 1 1e 1 0 1 0 /* TX_EN */ - 1 1f 2 0 1 0>;/* CRS */ - }; - }; - }; - - qe@e0100000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "qe"; - model = "QE"; - ranges = <0 e0100000 00100000>; - reg = ; - brg-frequency = <0>; - bus-frequency = ; - - muram@10000 { - device_type = "muram"; - ranges = <0 00010000 00004000>; - - data-only@0 { - reg = <0 4000>; - }; - }; - - spi@4c0 { - device_type = "spi"; - compatible = "fsl_spi"; - reg = <4c0 40>; - interrupts = <2>; - interrupt-parent = < &qeic >; - mode = "cpu"; - }; - - spi@500 { - device_type = "spi"; - compatible = "fsl_spi"; - reg = <500 40>; - interrupts = <1>; - interrupt-parent = < &qeic >; - mode = "cpu"; - }; - - usb@6c0 { - device_type = "usb"; - compatible = "qe_udc"; - reg = <6c0 40 8B00 100>; - interrupts = ; - interrupt-parent = < &qeic >; - mode = "slave"; - }; - - ucc@2200 { - device_type = "network"; - compatible = "ucc_geth"; - model = "UCC"; - device-id = <3>; - reg = <2200 200>; - interrupts = <22>; - interrupt-parent = < &qeic >; - mac-address = [ 00 04 9f 00 23 23 ]; - rx-clock = <19>; - tx-clock = <1a>; - phy-handle = < &phy3 >; - pio-handle = < &pio3 >; - }; - - ucc@3200 { - device_type = "network"; - compatible = "ucc_geth"; - model = "UCC"; - device-id = <4>; - reg = <3000 200>; - interrupts = <23>; - interrupt-parent = < &qeic >; - mac-address = [ 00 11 22 33 44 55 ]; - rx-clock = <17>; - tx-clock = <18>; - phy-handle = < &phy4 >; - pio-handle = < &pio4 >; - }; - - mdio@2320 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2320 18>; - device_type = "mdio"; - compatible = "ucc_geth_phy"; - - phy3: ethernet-phy@03 { - interrupt-parent = < &ipic >; - interrupts = <11 8>; - reg = <3>; - device_type = "ethernet-phy"; - interface = <3>; //ENET_100_MII - }; - phy4: ethernet-phy@04 { - interrupt-parent = < &ipic >; - interrupts = <12 8>; - reg = <4>; - device_type = "ethernet-phy"; - interface = <3>; - }; - }; - - qeic: qeic@80 { - interrupt-controller; - device_type = "qeic"; - #address-cells = <0>; - #interrupt-cells = <1>; - reg = <80 80>; - built-in; - big-endian; - interrupts = <20 8 21 8>; //high:32 low:33 - interrupt-parent = < &ipic >; - }; - }; -}; diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts new file mode 100644 index 000000000000..06b310698a02 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc832x_mds.dts @@ -0,0 +1,333 @@ +/* + * MPC8323E EMDS Device Tree Source + * + * Copyright 2006 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/ { + model = "MPC8323EMDS"; + compatible = "MPC8323EMDS", "MPC832xMDS", "MPC83xxMDS"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8323@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <4000>; // L1, 16K + i-cache-size = <4000>; // L1, 16K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + 32-bit; + }; + }; + + memory { + device_type = "memory"; + reg = <00000000 08000000>; + }; + + bcsr@f8000000 { + device_type = "board-control"; + reg = ; + }; + + soc8323@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 e0000000 00100000>; + reg = ; + bus-frequency = <7DE2900>; + + wdt@200 { + device_type = "watchdog"; + compatible = "mpc83xx_wdt"; + reg = <200 100>; + }; + + i2c@3000 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3000 100>; + interrupts = ; + interrupt-parent = < &ipic >; + dfsrr; + }; + + serial@4500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4500 100>; + clock-frequency = <0>; + interrupts = <9 8>; + interrupt-parent = < &ipic >; + }; + + serial@4600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4600 100>; + clock-frequency = <0>; + interrupts = ; + interrupt-parent = < &ipic >; + }; + + crypto@30000 { + device_type = "crypto"; + model = "SEC2"; + compatible = "talitos"; + reg = <30000 7000>; + interrupts = ; + interrupt-parent = < &ipic >; + /* Rev. 2.2 */ + num-channels = <1>; + channel-fifo-len = <18>; + exec-units-mask = <0000004c>; + descriptor-types-mask = <0122003f>; + }; + + pci@8500 { + interrupt-map-mask = ; + interrupt-map = < + /* IDSEL 0x11 AD17 */ + 8800 0 0 1 &ipic 14 8 + 8800 0 0 2 &ipic 15 8 + 8800 0 0 3 &ipic 16 8 + 8800 0 0 4 &ipic 17 8 + + /* IDSEL 0x12 AD18 */ + 9000 0 0 1 &ipic 16 8 + 9000 0 0 2 &ipic 17 8 + 9000 0 0 3 &ipic 14 8 + 9000 0 0 4 &ipic 15 8 + + /* IDSEL 0x13 AD19 */ + 9800 0 0 1 &ipic 17 8 + 9800 0 0 2 &ipic 14 8 + 9800 0 0 3 &ipic 15 8 + 9800 0 0 4 &ipic 16 8 + + /* IDSEL 0x15 AD21*/ + a800 0 0 1 &ipic 14 8 + a800 0 0 2 &ipic 15 8 + a800 0 0 3 &ipic 16 8 + a800 0 0 4 &ipic 17 8 + + /* IDSEL 0x16 AD22*/ + b000 0 0 1 &ipic 17 8 + b000 0 0 2 &ipic 14 8 + b000 0 0 3 &ipic 15 8 + b000 0 0 4 &ipic 16 8 + + /* IDSEL 0x17 AD23*/ + b800 0 0 1 &ipic 16 8 + b800 0 0 2 &ipic 17 8 + b800 0 0 3 &ipic 14 8 + b800 0 0 4 &ipic 15 8 + + /* IDSEL 0x18 AD24*/ + c000 0 0 1 &ipic 15 8 + c000 0 0 2 &ipic 16 8 + c000 0 0 3 &ipic 17 8 + c000 0 0 4 &ipic 14 8>; + interrupt-parent = < &ipic >; + interrupts = <42 8>; + bus-range = <0 0>; + ranges = <02000000 0 a0000000 90000000 0 10000000 + 42000000 0 80000000 80000000 0 10000000 + 01000000 0 00000000 d0000000 0 00100000>; + clock-frequency = <0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <8500 100>; + compatible = "83xx"; + device_type = "pci"; + }; + + ipic: pic@700 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <700 100>; + built-in; + device_type = "ipic"; + }; + + par_io@1400 { + reg = <1400 100>; + device_type = "par_io"; + num-ports = <7>; + + pio3: ucc_pin@03 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 3 4 3 0 2 0 /* MDIO */ + 3 5 1 0 2 0 /* MDC */ + 0 d 2 0 1 0 /* RX_CLK (CLK9) */ + 3 18 2 0 1 0 /* TX_CLK (CLK10) */ + 1 1 1 0 1 0 /* TxD1 */ + 1 0 1 0 1 0 /* TxD0 */ + 1 1 1 0 1 0 /* TxD1 */ + 1 2 1 0 1 0 /* TxD2 */ + 1 3 1 0 1 0 /* TxD3 */ + 1 4 2 0 1 0 /* RxD0 */ + 1 5 2 0 1 0 /* RxD1 */ + 1 6 2 0 1 0 /* RxD2 */ + 1 7 2 0 1 0 /* RxD3 */ + 1 8 2 0 1 0 /* RX_ER */ + 1 9 1 0 1 0 /* TX_ER */ + 1 a 2 0 1 0 /* RX_DV */ + 1 b 2 0 1 0 /* COL */ + 1 c 1 0 1 0 /* TX_EN */ + 1 d 2 0 1 0>;/* CRS */ + }; + pio4: ucc_pin@04 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 3 1f 2 0 1 0 /* RX_CLK (CLK7) */ + 3 6 2 0 1 0 /* TX_CLK (CLK8) */ + 1 12 1 0 1 0 /* TxD0 */ + 1 13 1 0 1 0 /* TxD1 */ + 1 14 1 0 1 0 /* TxD2 */ + 1 15 1 0 1 0 /* TxD3 */ + 1 16 2 0 1 0 /* RxD0 */ + 1 17 2 0 1 0 /* RxD1 */ + 1 18 2 0 1 0 /* RxD2 */ + 1 19 2 0 1 0 /* RxD3 */ + 1 1a 2 0 1 0 /* RX_ER */ + 1 1b 1 0 1 0 /* TX_ER */ + 1 1c 2 0 1 0 /* RX_DV */ + 1 1d 2 0 1 0 /* COL */ + 1 1e 1 0 1 0 /* TX_EN */ + 1 1f 2 0 1 0>;/* CRS */ + }; + }; + }; + + qe@e0100000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "qe"; + model = "QE"; + ranges = <0 e0100000 00100000>; + reg = ; + brg-frequency = <0>; + bus-frequency = ; + + muram@10000 { + device_type = "muram"; + ranges = <0 00010000 00004000>; + + data-only@0 { + reg = <0 4000>; + }; + }; + + spi@4c0 { + device_type = "spi"; + compatible = "fsl_spi"; + reg = <4c0 40>; + interrupts = <2>; + interrupt-parent = < &qeic >; + mode = "cpu"; + }; + + spi@500 { + device_type = "spi"; + compatible = "fsl_spi"; + reg = <500 40>; + interrupts = <1>; + interrupt-parent = < &qeic >; + mode = "cpu"; + }; + + usb@6c0 { + device_type = "usb"; + compatible = "qe_udc"; + reg = <6c0 40 8B00 100>; + interrupts = ; + interrupt-parent = < &qeic >; + mode = "slave"; + }; + + ucc@2200 { + device_type = "network"; + compatible = "ucc_geth"; + model = "UCC"; + device-id = <3>; + reg = <2200 200>; + interrupts = <22>; + interrupt-parent = < &qeic >; + mac-address = [ 00 04 9f 00 23 23 ]; + rx-clock = <19>; + tx-clock = <1a>; + phy-handle = < &phy3 >; + pio-handle = < &pio3 >; + }; + + ucc@3200 { + device_type = "network"; + compatible = "ucc_geth"; + model = "UCC"; + device-id = <4>; + reg = <3000 200>; + interrupts = <23>; + interrupt-parent = < &qeic >; + mac-address = [ 00 11 22 33 44 55 ]; + rx-clock = <17>; + tx-clock = <18>; + phy-handle = < &phy4 >; + pio-handle = < &pio4 >; + }; + + mdio@2320 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2320 18>; + device_type = "mdio"; + compatible = "ucc_geth_phy"; + + phy3: ethernet-phy@03 { + interrupt-parent = < &ipic >; + interrupts = <11 8>; + reg = <3>; + device_type = "ethernet-phy"; + interface = <3>; //ENET_100_MII + }; + phy4: ethernet-phy@04 { + interrupt-parent = < &ipic >; + interrupts = <12 8>; + reg = <4>; + device_type = "ethernet-phy"; + interface = <3>; + }; + }; + + qeic: qeic@80 { + interrupt-controller; + device_type = "qeic"; + #address-cells = <0>; + #interrupt-cells = <1>; + reg = <80 80>; + built-in; + big-endian; + interrupts = <20 8 21 8>; //high:32 low:33 + interrupt-parent = < &ipic >; + }; + }; +}; diff --git a/arch/powerpc/configs/mpc832x_mds_defconfig b/arch/powerpc/configs/mpc832x_mds_defconfig new file mode 100644 index 000000000000..e1b36de6b38c --- /dev/null +++ b/arch/powerpc/configs/mpc832x_mds_defconfig @@ -0,0 +1,1083 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.20-rc5 +# Tue Jan 30 14:27:25 2007 +# +# CONFIG_PPC64 is not set +CONFIG_PPC32=y +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +CONFIG_DEFAULT_UIMAGE=y + +# +# Processor support +# +# CONFIG_CLASSIC32 is not set +# CONFIG_PPC_82xx is not set +CONFIG_PPC_83xx=y +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_86xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_8xx is not set +# CONFIG_E200 is not set +CONFIG_6xx=y +CONFIG_83xx=y +CONFIG_PPC_FPU=y +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_PPC_STD_MMU=y +CONFIG_PPC_STD_MMU_32=y +# CONFIG_SMP is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +# CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +# CONFIG_EPOLL is not set +CONFIG_SHMEM=y +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_QUICC_ENGINE=y +CONFIG_PPC_GEN550=y +# CONFIG_WANT_EARLY_SERIAL is not set + +# +# Platform support +# +CONFIG_MPC832x_MDS=y +# CONFIG_MPC834x_SYS is not set +# CONFIG_MPC834x_ITX is not set +# CONFIG_MPC8360E_PB is not set +CONFIG_PPC_MPC832x=y +# CONFIG_MPIC is not set + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_MATH_EMULATION=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_GENERIC_ISA_DMA=y +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_FSL_SOC=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PCIEPORTBUS is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_BOOT_LOAD=0x00800000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=32768 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +# CONFIG_BLK_DEV_SD is not set +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# +# CONFIG_MAC_EMUMOUSEBTN is not set +# CONFIG_WINDFARM is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_NET_PCI is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_GIANFAR is not set +CONFIG_UCC_GETH=y +# CONFIG_UGETH_NAPI is not set +# CONFIG_UGETH_MAGIC_PACKET is not set +# CONFIG_UGETH_FILTERING is not set +# CONFIG_UGETH_TX_ON_DEMOND is not set +# CONFIG_QLA3XXX is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_83xx_WDT=y + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +CONFIG_I2C_MPC=y +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_M41T00 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB is not set +# CONFIG_FB_IBM_GXT4500 is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# HID Devices +# +CONFIG_HID=y + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# Virtualization +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +# CONFIG_MSDOS_PARTITION is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# QE Options +# +CONFIG_UCC_SLOW=y +CONFIG_UCC_FAST=y +CONFIG_UCC=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_IOMAP_COPY=y + +# +# Instrumentation Support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_BOOTX_TEXT is not set +# CONFIG_SERIAL_TEXT_DEBUG is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# diff --git a/arch/powerpc/configs/mpc832xemds_defconfig b/arch/powerpc/configs/mpc832xemds_defconfig deleted file mode 100644 index e1b36de6b38c..000000000000 --- a/arch/powerpc/configs/mpc832xemds_defconfig +++ /dev/null @@ -1,1083 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.20-rc5 -# Tue Jan 30 14:27:25 2007 -# -# CONFIG_PPC64 is not set -CONFIG_PPC32=y -CONFIG_PPC_MERGE=y -CONFIG_MMU=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_IRQ_PER_CPU=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_ARCH_HAS_ILOG2_U32=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_PPC=y -CONFIG_EARLY_PRINTK=y -CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_PPC_OF=y -CONFIG_PPC_UDBG_16550=y -# CONFIG_GENERIC_TBSYNC is not set -CONFIG_AUDIT_ARCH=y -CONFIG_GENERIC_BUG=y -CONFIG_DEFAULT_UIMAGE=y - -# -# Processor support -# -# CONFIG_CLASSIC32 is not set -# CONFIG_PPC_82xx is not set -CONFIG_PPC_83xx=y -# CONFIG_PPC_85xx is not set -# CONFIG_PPC_86xx is not set -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_8xx is not set -# CONFIG_E200 is not set -CONFIG_6xx=y -CONFIG_83xx=y -CONFIG_PPC_FPU=y -# CONFIG_PPC_DCR_NATIVE is not set -# CONFIG_PPC_DCR_MMIO is not set -CONFIG_PPC_STD_MMU=y -CONFIG_PPC_STD_MMU_32=y -# CONFIG_SMP is not set -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set -# CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set -CONFIG_SYSFS_DEPRECATED=y -# CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -# CONFIG_KALLSYMS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -# CONFIG_EPOLL is not set -CONFIG_SHMEM=y -CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set - -# -# Block layer -# -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_QUICC_ENGINE=y -CONFIG_PPC_GEN550=y -# CONFIG_WANT_EARLY_SERIAL is not set - -# -# Platform support -# -CONFIG_MPC832x_MDS=y -# CONFIG_MPC834x_SYS is not set -# CONFIG_MPC834x_ITX is not set -# CONFIG_MPC8360E_PB is not set -CONFIG_PPC_MPC832x=y -# CONFIG_MPIC is not set - -# -# Kernel options -# -# CONFIG_HIGHMEM is not set -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_300 is not set -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_MATH_EMULATION=y -CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_PROC_DEVICETREE=y -# CONFIG_CMDLINE_BOOL is not set -# CONFIG_PM is not set -CONFIG_SECCOMP=y -CONFIG_ISA_DMA_API=y - -# -# Bus options -# -CONFIG_GENERIC_ISA_DMA=y -# CONFIG_MPIC_WEIRD is not set -# CONFIG_PPC_I8259 is not set -CONFIG_PPC_INDIRECT_PCI=y -CONFIG_FSL_SOC=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -# CONFIG_PCIEPORTBUS is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_BOOT_LOAD=0x00800000 - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -# CONFIG_NETDEBUG is not set -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set -# CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=32768 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# -# CONFIG_SGI_IOC4 is not set -# CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -# CONFIG_SCSI_TGT is not set -# CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -# CONFIG_BLK_DEV_SD is not set -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -# CONFIG_BLK_DEV_SR is not set -# CONFIG_CHR_DEV_SG is not set -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set -# CONFIG_SCSI_SCAN_ASYNC is not set - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# -# CONFIG_ISCSI_TCP is not set -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_AIC94XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_ARCMSR is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_STEX is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_QLA_ISCSI is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_SRP is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# -# CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# -# CONFIG_MAC_EMUMOUSEBTN is not set -# CONFIG_WINDFARM is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -# CONFIG_NET_PCI is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -# CONFIG_GIANFAR is not set -CONFIG_UCC_GETH=y -# CONFIG_UGETH_NAPI is not set -# CONFIG_UGETH_MAGIC_PACKET is not set -# CONFIG_UGETH_FILTERING is not set -# CONFIG_UGETH_TX_ON_DEMOND is not set -# CONFIG_QLA3XXX is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set -# CONFIG_MYRI10GE is not set -# CONFIG_NETXEN_NIC is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_PCI=y -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -# CONFIG_SERIAL_UARTLITE is not set -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_83xx_WDT=y - -# -# PCI-based Watchdog Cards -# -# CONFIG_PCIPCWATCHDOG is not set -# CONFIG_WDTPCI is not set -CONFIG_HW_RANDOM=y -# CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_MPC=y -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_M41T00 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_PC87427 is not set -# CONFIG_SENSORS_SIS5595 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47M192 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_VT1211 is not set -# CONFIG_SENSORS_VT8231 is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83791D is not set -# CONFIG_SENSORS_W83792D is not set -# CONFIG_SENSORS_W83793 is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -CONFIG_FIRMWARE_EDID=y -# CONFIG_FB is not set -# CONFIG_FB_IBM_GXT4500 is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# HID Devices -# -CONFIG_HID=y - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB_ARCH_HAS_EHCI=y -# CONFIG_USB is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# -# CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Virtualization -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=y -CONFIG_RPCSEC_GSS_KRB5=y -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -# CONFIG_MSDOS_PARTITION is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# Distributed Lock Manager -# -# CONFIG_DLM is not set - -# -# QE Options -# -CONFIG_UCC_SLOW=y -CONFIG_UCC_FAST=y -CONFIG_UCC=y - -# -# Library routines -# -CONFIG_BITREVERSE=y -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y -CONFIG_IOMAP_COPY=y - -# -# Instrumentation Support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_MUST_CHECK=y -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_BOOTX_TEXT is not set -# CONFIG_SERIAL_TEXT_DEBUG is not set -# CONFIG_PPC_EARLY_DEBUG is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_MANAGER=y -# CONFIG_CRYPTO_HMAC is not set -# CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=y -# CONFIG_CRYPTO_SHA1 is not set -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -# CONFIG_CRYPTO_LRW is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# -- cgit v1.2.3 From 6340aa61b1f1d9c2aadb20594778a5f849bcbb69 Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Sat, 17 Feb 2007 19:05:24 +0100 Subject: kbuild: Replace remaining "depends" with "depends on" Replace the very few remaining "depends" Kconfig directives with "depends on". Signed-off-by: Robert P. J. Day Signed-off-by: Adrian Bunk --- arch/arm/Kconfig | 2 +- arch/arm/mm/Kconfig | 2 +- arch/v850/Kconfig | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 5c795193ebba..77d062eaf086 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -405,7 +405,7 @@ source arch/arm/mm/Kconfig config IWMMXT bool "Enable iWMMXt support" - depends CPU_XSCALE || CPU_XSC3 + depends on CPU_XSCALE || CPU_XSC3 default y if PXA27x help Enable support for iWMMXt context switching at run time if diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index aade2f72c920..3c2f97938c44 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -525,7 +525,7 @@ config CPU_BIG_ENDIAN of your chipset/board/processor. config CPU_HIGH_VECTOR - depends !MMU && CPU_CP15 && !CPU_ARM740T + depends on !MMU && CPU_CP15 && !CPU_ARM740T bool "Select the High exception vector" default n help diff --git a/arch/v850/Kconfig b/arch/v850/Kconfig index dbfab8fc9b49..50ccc7f57cd0 100644 --- a/arch/v850/Kconfig +++ b/arch/v850/Kconfig @@ -217,7 +217,7 @@ menu "Processor type and features" # Some platforms pre-zero memory, in which case the kernel doesn't need to config ZERO_BSS bool - depends !V850E2_SIM85E2C + depends on !V850E2_SIM85E2C default y # The crappy-ass zone allocator requires that the start of allocatable -- cgit v1.2.3 From d08df601a30df9e36c29f3214315f4f0c8784c68 Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Sat, 17 Feb 2007 19:07:33 +0100 Subject: Various typo fixes. Correct mis-spellings of "algorithm", "appear", "consistent" and (shame, shame) "kernel". Signed-off-by: Robert P. J. Day Signed-off-by: Adrian Bunk --- arch/m32r/lib/usercopy.c | 4 ++-- arch/m68knommu/platform/5307/timers.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/m32r/lib/usercopy.c b/arch/m32r/lib/usercopy.c index 896cef1aca5f..82abd159dbef 100644 --- a/arch/m32r/lib/usercopy.c +++ b/arch/m32r/lib/usercopy.c @@ -293,7 +293,7 @@ long strnlen_user(const char __user *s, long n) : "0" (n), "1" (s), "r" (n & 3), "r" (mask), "r"(0x01010101) : "r0", "r1", "cbit"); - /* NOTE: strnlen_user() algorism: + /* NOTE: strnlen_user() algorithm: * { * char *p; * for (p = s; n-- && *p != '\0'; ++p) @@ -369,7 +369,7 @@ long strnlen_user(const char __user *s, long n) : "0" (n), "1" (s), "r" (n & 3), "r" (mask), "r"(0x01010101) : "r0", "r1", "r2", "r3", "cbit"); - /* NOTE: strnlen_user() algorism: + /* NOTE: strnlen_user() algorithm: * { * char *p; * for (p = s; n-- && *p != '\0'; ++p) diff --git a/arch/m68knommu/platform/5307/timers.c b/arch/m68knommu/platform/5307/timers.c index 87b112b363a6..92e58070b016 100644 --- a/arch/m68knommu/platform/5307/timers.c +++ b/arch/m68knommu/platform/5307/timers.c @@ -104,7 +104,7 @@ unsigned long coldfire_timer_offset(void) /* * Choose a reasonably fast profile timer. Make it an odd value to - * try and get good coverage of kernal operations. + * try and get good coverage of kernel operations. */ #define PROFILEHZ 1013 -- cgit v1.2.3 From ca820181fc187af316a18b2700582663662c4012 Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Sat, 17 Feb 2007 19:10:01 +0100 Subject: Use ARRAY_SIZE() macro in i386 relocs.c file Change the explicit code in the relocs.c file to use ARRAY_SIZE() and add a definition of ARRAY_SIZE() since this is a userspace program and wouldn't include kernel.h. Signed-off-by: Robert P. J. Day Signed-off-by: Adrian Bunk --- arch/i386/boot/compressed/relocs.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/i386/boot/compressed/relocs.c b/arch/i386/boot/compressed/relocs.c index 881951ca03e1..ce4fda261aaf 100644 --- a/arch/i386/boot/compressed/relocs.c +++ b/arch/i386/boot/compressed/relocs.c @@ -11,6 +11,7 @@ #include #define MAX_SHDRS 100 +#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) static Elf32_Ehdr ehdr; static Elf32_Shdr shdr[MAX_SHDRS]; static Elf32_Sym *symtab[MAX_SHDRS]; @@ -71,7 +72,7 @@ static const char *sym_type(unsigned type) #undef SYM_TYPE }; const char *name = "unknown sym type name"; - if (type < sizeof(type_name)/sizeof(type_name[0])) { + if (type < ARRAY_SIZE(type_name)) { name = type_name[type]; } return name; @@ -87,7 +88,7 @@ static const char *sym_bind(unsigned bind) #undef SYM_BIND }; const char *name = "unknown sym bind name"; - if (bind < sizeof(bind_name)/sizeof(bind_name[0])) { + if (bind < ARRAY_SIZE(bind_name)) { name = bind_name[bind]; } return name; @@ -104,7 +105,7 @@ static const char *sym_visibility(unsigned visibility) #undef SYM_VISIBILITY }; const char *name = "unknown sym visibility name"; - if (visibility < sizeof(visibility_name)/sizeof(visibility_name[0])) { + if (visibility < ARRAY_SIZE(visibility_name)) { name = visibility_name[visibility]; } return name; @@ -128,7 +129,7 @@ static const char *rel_type(unsigned type) #undef REL_TYPE }; const char *name = "unknown type rel type name"; - if (type < sizeof(type_name)/sizeof(type_name[0])) { + if (type < ARRAY_SIZE(type_name)) { name = type_name[type]; } return name; -- cgit v1.2.3 From 405ae7d381302468ecc803f2148a2ae40a04c999 Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Sat, 17 Feb 2007 19:13:42 +0100 Subject: Replace remaining references to "driverfs" with "sysfs". Globally, s/driverfs/sysfs/g. Signed-off-by: Robert P. J. Day Signed-off-by: Adrian Bunk --- arch/i386/kernel/topology.c | 2 +- arch/i386/oprofile/nmi_int.c | 14 +++++++------- arch/parisc/kernel/topology.c | 2 +- arch/x86_64/kernel/time.c | 2 +- 4 files changed, 10 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/topology.c b/arch/i386/kernel/topology.c index 79cf608e14ca..45782356a618 100644 --- a/arch/i386/kernel/topology.c +++ b/arch/i386/kernel/topology.c @@ -1,5 +1,5 @@ /* - * arch/i386/kernel/topology.c - Populate driverfs with topology information + * arch/i386/kernel/topology.c - Populate sysfs with topology information * * Written by: Matthew Dobson, IBM Corporation * Original Code: Paul Dorwin, IBM Corporation, Patrick Mochel, OSDL diff --git a/arch/i386/oprofile/nmi_int.c b/arch/i386/oprofile/nmi_int.c index 3700eef78743..8fda7be9dd4d 100644 --- a/arch/i386/oprofile/nmi_int.c +++ b/arch/i386/oprofile/nmi_int.c @@ -63,7 +63,7 @@ static struct sys_device device_oprofile = { }; -static int __init init_driverfs(void) +static int __init init_sysfs(void) { int error; if (!(error = sysdev_class_register(&oprofile_sysclass))) @@ -72,15 +72,15 @@ static int __init init_driverfs(void) } -static void exit_driverfs(void) +static void exit_sysfs(void) { sysdev_unregister(&device_oprofile); sysdev_class_unregister(&oprofile_sysclass); } #else -#define init_driverfs() do { } while (0) -#define exit_driverfs() do { } while (0) +#define init_sysfs() do { } while (0) +#define exit_sysfs() do { } while (0) #endif /* CONFIG_PM */ static int profile_exceptions_notify(struct notifier_block *self, @@ -385,7 +385,7 @@ static int __init ppro_init(char ** cpu_type) return 1; } -/* in order to get driverfs right */ +/* in order to get sysfs right */ static int using_nmi; int __init op_nmi_init(struct oprofile_operations *ops) @@ -440,7 +440,7 @@ int __init op_nmi_init(struct oprofile_operations *ops) return -ENODEV; } - init_driverfs(); + init_sysfs(); using_nmi = 1; ops->create_files = nmi_create_files; ops->setup = nmi_setup; @@ -456,5 +456,5 @@ int __init op_nmi_init(struct oprofile_operations *ops) void op_nmi_exit(void) { if (using_nmi) - exit_driverfs(); + exit_sysfs(); } diff --git a/arch/parisc/kernel/topology.c b/arch/parisc/kernel/topology.c index 068b20d822e7..d71cb018a21e 100644 --- a/arch/parisc/kernel/topology.c +++ b/arch/parisc/kernel/topology.c @@ -1,5 +1,5 @@ /* - * arch/parisc/kernel/topology.c - Populate driverfs with topology information + * arch/parisc/kernel/topology.c - Populate sysfs with topology information * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c index a87c51705620..c9addcfb96dc 100644 --- a/arch/x86_64/kernel/time.c +++ b/arch/x86_64/kernel/time.c @@ -418,7 +418,7 @@ static struct sysdev_class timer_sysclass = { set_kset_name("timer"), }; -/* XXX this driverfs stuff should probably go elsewhere later -john */ +/* XXX this sysfs stuff should probably go elsewhere later -john */ static struct sys_device device_timer = { .id = 0, .cls = &timer_sysclass, -- cgit v1.2.3 From 85d1fe095ccb6318f7a128c96630477a8859cfce Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Sat, 17 Feb 2007 19:21:17 +0100 Subject: Fix comment typo "spin_lock_irqrestore". Fix "spin_lock_irqrestore" to "spin_unlock_irqrestore." Signed-off-by: Robert P. J. Day Signed-off-by: Adrian Bunk --- arch/ia64/kernel/perfmon.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c index 2ecb20b551e1..9ddf896a137a 100644 --- a/arch/ia64/kernel/perfmon.c +++ b/arch/ia64/kernel/perfmon.c @@ -147,7 +147,7 @@ * in UP: * - we need to protect against PMU overflow interrupts (local_irq_disable) * - * spin_lock_irqsave()/spin_lock_irqrestore(): + * spin_lock_irqsave()/spin_unlock_irqrestore(): * in SMP: local_irq_disable + spin_lock * in UP : local_irq_disable * -- cgit v1.2.3 From 1b3c3714cb4767d00f507cc6854d3339d82c5b9d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Sat, 17 Feb 2007 19:23:03 +0100 Subject: Fix typos concerning hierarchy MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit heirarchical, hierachical -> hierarchical heirarchy, hierachy -> hierarchy Signed-off-by: Uwe Kleine-König Signed-off-by: Adrian Bunk --- arch/powerpc/mm/numa.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index 262790910ff2..e86c37c82cfd 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -154,7 +154,7 @@ EXPORT_SYMBOL_GPL(of_node_to_nid); * characteristics relative to its multiple connections. We ignore * this for now. We also assume that all cpu and memory sets have * their distances represented at a common level. This won't be - * true for heirarchical NUMA. + * true for hierarchical NUMA. * * In any case the ibm,associativity-reference-points should give * the correct depth for a normal NUMA system. -- cgit v1.2.3 From c5a69d57eb48e36f84c0737b5b24ec277d7dbfba Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Sat, 17 Feb 2007 20:11:19 +0100 Subject: Storage class should be before const qualifier The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: Tobias Klauser Signed-off-by: Adrian Bunk --- arch/mips/kernel/machine_kexec.c | 4 ++-- arch/powerpc/kernel/rtas.c | 2 +- arch/sh/kernel/cpu/sh2/clock-sh7619.c | 4 ++-- arch/sh/kernel/cpu/sh2a/clock-sh7206.c | 4 ++-- 4 files changed, 7 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/machine_kexec.c b/arch/mips/kernel/machine_kexec.c index e0ad754c7edd..8f42fa85ac9e 100644 --- a/arch/mips/kernel/machine_kexec.c +++ b/arch/mips/kernel/machine_kexec.c @@ -13,8 +13,8 @@ #include #include -const extern unsigned char relocate_new_kernel[]; -const extern unsigned int relocate_new_kernel_size; +extern const unsigned char relocate_new_kernel[]; +extern const unsigned int relocate_new_kernel_size; extern unsigned long kexec_start_address; extern unsigned long kexec_indirection_page; diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c index 76b5d7ebdcc6..9d0735a54564 100644 --- a/arch/powerpc/kernel/rtas.c +++ b/arch/powerpc/kernel/rtas.c @@ -182,7 +182,7 @@ void rtas_progress(char *s, unsigned short hex) char *os; static int display_character, set_indicator; static int display_width, display_lines, form_feed; - const static int *row_width; + static const int *row_width; static DEFINE_SPINLOCK(progress_lock); static int current_line; static int pending_newline = 0; /* did last write end with unprinted newline? */ diff --git a/arch/sh/kernel/cpu/sh2/clock-sh7619.c b/arch/sh/kernel/cpu/sh2/clock-sh7619.c index d0440b269702..d2c157917999 100644 --- a/arch/sh/kernel/cpu/sh2/clock-sh7619.c +++ b/arch/sh/kernel/cpu/sh2/clock-sh7619.c @@ -18,8 +18,8 @@ #include #include -const static int pll1rate[]={1,2}; -const static int pfc_divisors[]={1,2,0,4}; +static const int pll1rate[] = {1,2}; +static const int pfc_divisors[] = {1,2,0,4}; #if (CONFIG_SH_CLK_MD == 1) || (CONFIG_SH_CLK_MD == 2) #define PLL2 (4) diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7206.c b/arch/sh/kernel/cpu/sh2a/clock-sh7206.c index a9ad309c6a33..82d7f991ef6b 100644 --- a/arch/sh/kernel/cpu/sh2a/clock-sh7206.c +++ b/arch/sh/kernel/cpu/sh2a/clock-sh7206.c @@ -18,8 +18,8 @@ #include #include -const static int pll1rate[]={1,2,3,4,6,8}; -const static int pfc_divisors[]={1,2,3,4,6,8,12}; +static const int pll1rate[]={1,2,3,4,6,8}; +static const int pfc_divisors[]={1,2,3,4,6,8,12}; #define ifc_divisors pfc_divisors #if (CONFIG_SH_CLK_MD == 2) -- cgit v1.2.3 From e34f80cd865a89341331568e715e3d3e35d0d929 Mon Sep 17 00:00:00 2001 From: Nicolas Kaiser Date: Sat, 17 Feb 2007 20:12:12 +0100 Subject: arch/cris: typo in KERN_INFO Typo in KERN_INFO. Signed-off-by: Nicolas Kaiser Signed-off-by: Adrian Bunk --- arch/cris/arch-v10/drivers/pcf8563.c | 2 +- arch/cris/arch-v32/drivers/pcf8563.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/cris/arch-v10/drivers/pcf8563.c b/arch/cris/arch-v10/drivers/pcf8563.c index 107796e50149..d47cfbf98d6e 100644 --- a/arch/cris/arch-v10/drivers/pcf8563.c +++ b/arch/cris/arch-v10/drivers/pcf8563.c @@ -311,7 +311,7 @@ pcf8563_register(void) { pcf8563_init(); if (register_chrdev(PCF8563_MAJOR, DEVICE_NAME, &pcf8563_fops) < 0) { - printk(KERN_INFO "%s: Unable to get major numer %d for RTC device.\n", + printk(KERN_INFO "%s: Unable to get major number %d for RTC device.\n", PCF8563_NAME, PCF8563_MAJOR); return -1; } diff --git a/arch/cris/arch-v32/drivers/pcf8563.c b/arch/cris/arch-v32/drivers/pcf8563.c index 544ab0179411..24b919b3821a 100644 --- a/arch/cris/arch-v32/drivers/pcf8563.c +++ b/arch/cris/arch-v32/drivers/pcf8563.c @@ -171,7 +171,7 @@ pcf8563_init(void) goto err; if (register_chrdev(PCF8563_MAJOR, DEVICE_NAME, &pcf8563_fops) < 0) { - printk(KERN_INFO "%s: Unable to get major numer %d for RTC device.\n", + printk(KERN_INFO "%s: Unable to get major number %d for RTC device.\n", PCF8563_NAME, PCF8563_MAJOR); return -1; } -- cgit v1.2.3 From 520948796335111cf91970efabca7e5d064db344 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Sat, 17 Feb 2007 16:04:23 -0600 Subject: [POWERPC] 85xx: Cleaned up platform dts files * Fixed up top level compatible property for all boards * Removed explicit linux,phandle usage. Use references and labels now * Fixed phy-phandles for TSEC3/4 in mpc8548cds.dts Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8540ads.dts | 142 +++++++++++++++---------------- arch/powerpc/boot/dts/mpc8541cds.dts | 108 +++++++++++------------- arch/powerpc/boot/dts/mpc8548cds.dts | 129 +++++++++++++--------------- arch/powerpc/boot/dts/mpc8555cds.dts | 108 +++++++++++------------- arch/powerpc/boot/dts/mpc8560ads.dts | 157 ++++++++++++++++------------------- arch/powerpc/boot/dts/mpc8568mds.dts | 96 +++++++++------------ 6 files changed, 333 insertions(+), 407 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts index 5f41c1f7a5f3..3c0917fa791c 100644 --- a/arch/powerpc/boot/dts/mpc8540ads.dts +++ b/arch/powerpc/boot/dts/mpc8540ads.dts @@ -12,16 +12,14 @@ / { model = "MPC8540ADS"; - compatible = "MPC85xxADS"; + compatible = "MPC8540ADS", "MPC85xxADS"; #address-cells = <1>; #size-cells = <1>; - linux,phandle = <100>; cpus { #cpus = <1>; #address-cells = <1>; #size-cells = <0>; - linux,phandle = <200>; PowerPC,8540@0 { device_type = "cpu"; @@ -34,13 +32,11 @@ bus-frequency = <0>; // 166 MHz clock-frequency = <0>; // 825 MHz, from uboot 32-bit; - linux,phandle = <201>; }; }; memory { device_type = "memory"; - linux,phandle = <300>; reg = <00000000 08000000>; // 128M at 0x0 }; @@ -58,7 +54,7 @@ compatible = "fsl-i2c"; reg = <3000 100>; interrupts = <1b 2>; - interrupt-parent = <40000>; + interrupt-parent = <&mpic>; dfsrr; }; @@ -68,24 +64,20 @@ device_type = "mdio"; compatible = "gianfar"; reg = <24520 20>; - linux,phandle = <24520>; - ethernet-phy@0 { - linux,phandle = <2452000>; - interrupt-parent = <40000>; + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; interrupts = <35 1>; reg = <0>; device_type = "ethernet-phy"; }; - ethernet-phy@1 { - linux,phandle = <2452001>; - interrupt-parent = <40000>; + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; interrupts = <35 1>; reg = <1>; device_type = "ethernet-phy"; }; - ethernet-phy@3 { - linux,phandle = <2452003>; - interrupt-parent = <40000>; + phy3: ethernet-phy@3 { + interrupt-parent = <&mpic>; interrupts = <37 1>; reg = <3>; device_type = "ethernet-phy"; @@ -102,8 +94,8 @@ address = [ 00 E0 0C 00 73 00 ]; local-mac-address = [ 00 E0 0C 00 73 00 ]; interrupts = ; - interrupt-parent = <40000>; - phy-handle = <2452000>; + interrupt-parent = <&mpic>; + phy-handle = <&phy0>; }; ethernet@25000 { @@ -116,8 +108,8 @@ address = [ 00 E0 0C 00 73 01 ]; local-mac-address = [ 00 E0 0C 00 73 01 ]; interrupts = <13 2 14 2 18 2>; - interrupt-parent = <40000>; - phy-handle = <2452001>; + interrupt-parent = <&mpic>; + phy-handle = <&phy1>; }; ethernet@26000 { @@ -130,8 +122,8 @@ address = [ 00 E0 0C 00 73 02 ]; local-mac-address = [ 00 E0 0C 00 73 02 ]; interrupts = <19 2>; - interrupt-parent = <40000>; - phy-handle = <2452003>; + interrupt-parent = <&mpic>; + phy-handle = <&phy3>; }; serial@4500 { @@ -140,7 +132,7 @@ reg = <4500 100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? interrupts = <1a 2>; - interrupt-parent = <40000>; + interrupt-parent = <&mpic>; }; serial@4600 { @@ -149,85 +141,84 @@ reg = <4600 100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? interrupts = <1a 2>; - interrupt-parent = <40000>; + interrupt-parent = <&mpic>; }; pci@8000 { - linux,phandle = <8000>; interrupt-map-mask = ; interrupt-map = < /* IDSEL 0x02 */ - 1000 0 0 1 40000 31 1 - 1000 0 0 2 40000 32 1 - 1000 0 0 3 40000 33 1 - 1000 0 0 4 40000 34 1 + 1000 0 0 1 &mpic 31 1 + 1000 0 0 2 &mpic 32 1 + 1000 0 0 3 &mpic 33 1 + 1000 0 0 4 &mpic 34 1 /* IDSEL 0x03 */ - 1800 0 0 1 40000 34 1 - 1800 0 0 2 40000 31 1 - 1800 0 0 3 40000 32 1 - 1800 0 0 4 40000 33 1 + 1800 0 0 1 &mpic 34 1 + 1800 0 0 2 &mpic 31 1 + 1800 0 0 3 &mpic 32 1 + 1800 0 0 4 &mpic 33 1 /* IDSEL 0x04 */ - 2000 0 0 1 40000 33 1 - 2000 0 0 2 40000 34 1 - 2000 0 0 3 40000 31 1 - 2000 0 0 4 40000 32 1 + 2000 0 0 1 &mpic 33 1 + 2000 0 0 2 &mpic 34 1 + 2000 0 0 3 &mpic 31 1 + 2000 0 0 4 &mpic 32 1 /* IDSEL 0x05 */ - 2800 0 0 1 40000 32 1 - 2800 0 0 2 40000 33 1 - 2800 0 0 3 40000 34 1 - 2800 0 0 4 40000 31 1 + 2800 0 0 1 &mpic 32 1 + 2800 0 0 2 &mpic 33 1 + 2800 0 0 3 &mpic 34 1 + 2800 0 0 4 &mpic 31 1 /* IDSEL 0x0c */ - 6000 0 0 1 40000 31 1 - 6000 0 0 2 40000 32 1 - 6000 0 0 3 40000 33 1 - 6000 0 0 4 40000 34 1 + 6000 0 0 1 &mpic 31 1 + 6000 0 0 2 &mpic 32 1 + 6000 0 0 3 &mpic 33 1 + 6000 0 0 4 &mpic 34 1 /* IDSEL 0x0d */ - 6800 0 0 1 40000 34 1 - 6800 0 0 2 40000 31 1 - 6800 0 0 3 40000 32 1 - 6800 0 0 4 40000 33 1 + 6800 0 0 1 &mpic 34 1 + 6800 0 0 2 &mpic 31 1 + 6800 0 0 3 &mpic 32 1 + 6800 0 0 4 &mpic 33 1 /* IDSEL 0x0e */ - 7000 0 0 1 40000 33 1 - 7000 0 0 2 40000 34 1 - 7000 0 0 3 40000 31 1 - 7000 0 0 4 40000 32 1 + 7000 0 0 1 &mpic 33 1 + 7000 0 0 2 &mpic 34 1 + 7000 0 0 3 &mpic 31 1 + 7000 0 0 4 &mpic 32 1 /* IDSEL 0x0f */ - 7800 0 0 1 40000 32 1 - 7800 0 0 2 40000 33 1 - 7800 0 0 3 40000 34 1 - 7800 0 0 4 40000 31 1 + 7800 0 0 1 &mpic 32 1 + 7800 0 0 2 &mpic 33 1 + 7800 0 0 3 &mpic 34 1 + 7800 0 0 4 &mpic 31 1 /* IDSEL 0x12 */ - 9000 0 0 1 40000 31 1 - 9000 0 0 2 40000 32 1 - 9000 0 0 3 40000 33 1 - 9000 0 0 4 40000 34 1 + 9000 0 0 1 &mpic 31 1 + 9000 0 0 2 &mpic 32 1 + 9000 0 0 3 &mpic 33 1 + 9000 0 0 4 &mpic 34 1 /* IDSEL 0x13 */ - 9800 0 0 1 40000 34 1 - 9800 0 0 2 40000 31 1 - 9800 0 0 3 40000 32 1 - 9800 0 0 4 40000 33 1 + 9800 0 0 1 &mpic 34 1 + 9800 0 0 2 &mpic 31 1 + 9800 0 0 3 &mpic 32 1 + 9800 0 0 4 &mpic 33 1 /* IDSEL 0x14 */ - a000 0 0 1 40000 33 1 - a000 0 0 2 40000 34 1 - a000 0 0 3 40000 31 1 - a000 0 0 4 40000 32 1 + a000 0 0 1 &mpic 33 1 + a000 0 0 2 &mpic 34 1 + a000 0 0 3 &mpic 31 1 + a000 0 0 4 &mpic 32 1 /* IDSEL 0x15 */ - a800 0 0 1 40000 32 1 - a800 0 0 2 40000 33 1 - a800 0 0 3 40000 34 1 - a800 0 0 4 40000 31 1>; - interrupt-parent = <40000>; + a800 0 0 1 &mpic 32 1 + a800 0 0 2 &mpic 33 1 + a800 0 0 3 &mpic 34 1 + a800 0 0 4 &mpic 31 1>; + interrupt-parent = <&mpic>; interrupts = <08 2>; bus-range = <0 0>; ranges = <02000000 0 80000000 80000000 0 20000000 @@ -241,8 +232,7 @@ device_type = "pci"; }; - pic@40000 { - linux,phandle = <40000>; + mpic: pic@40000 { clock-frequency = <0>; interrupt-controller; #address-cells = <0>; diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts index 7be0bc659e1c..2a1ae760ab3a 100644 --- a/arch/powerpc/boot/dts/mpc8541cds.dts +++ b/arch/powerpc/boot/dts/mpc8541cds.dts @@ -12,16 +12,14 @@ / { model = "MPC8541CDS"; - compatible = "MPC85xxCDS"; + compatible = "MPC8541CDS", "MPC85xxCDS"; #address-cells = <1>; #size-cells = <1>; - linux,phandle = <100>; cpus { #cpus = <1>; #address-cells = <1>; #size-cells = <0>; - linux,phandle = <200>; PowerPC,8541@0 { device_type = "cpu"; @@ -34,13 +32,11 @@ bus-frequency = <0>; // 166 MHz clock-frequency = <0>; // 825 MHz, from uboot 32-bit; - linux,phandle = <201>; }; }; memory { device_type = "memory"; - linux,phandle = <300>; reg = <00000000 08000000>; // 128M at 0x0 }; @@ -58,7 +54,7 @@ compatible = "fsl-i2c"; reg = <3000 100>; interrupts = <1b 2>; - interrupt-parent = <40000>; + interrupt-parent = <&mpic>; dfsrr; }; @@ -68,17 +64,14 @@ device_type = "mdio"; compatible = "gianfar"; reg = <24520 20>; - linux,phandle = <24520>; - ethernet-phy@0 { - linux,phandle = <2452000>; - interrupt-parent = <40000>; + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; interrupts = <35 0>; reg = <0>; device_type = "ethernet-phy"; }; - ethernet-phy@1 { - linux,phandle = <2452001>; - interrupt-parent = <40000>; + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; interrupts = <35 0>; reg = <1>; device_type = "ethernet-phy"; @@ -94,8 +87,8 @@ reg = <24000 1000>; local-mac-address = [ 00 E0 0C 00 73 00 ]; interrupts = ; - interrupt-parent = <40000>; - phy-handle = <2452000>; + interrupt-parent = <&mpic>; + phy-handle = <&phy0>; }; ethernet@25000 { @@ -107,8 +100,8 @@ reg = <25000 1000>; local-mac-address = [ 00 E0 0C 00 73 01 ]; interrupts = <13 2 14 2 18 2>; - interrupt-parent = <40000>; - phy-handle = <2452001>; + interrupt-parent = <&mpic>; + phy-handle = <&phy1>; }; serial@4500 { @@ -117,7 +110,7 @@ reg = <4500 100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? interrupts = <1a 2>; - interrupt-parent = <40000>; + interrupt-parent = <&mpic>; }; serial@4600 { @@ -126,57 +119,56 @@ reg = <4600 100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? interrupts = <1a 2>; - interrupt-parent = <40000>; + interrupt-parent = <&mpic>; }; - pci@8000 { - linux,phandle = <8000>; + pci1: pci@8000 { interrupt-map-mask = <1f800 0 0 7>; interrupt-map = < /* IDSEL 0x10 */ - 08000 0 0 1 40000 30 1 - 08000 0 0 2 40000 31 1 - 08000 0 0 3 40000 32 1 - 08000 0 0 4 40000 33 1 + 08000 0 0 1 &mpic 30 1 + 08000 0 0 2 &mpic 31 1 + 08000 0 0 3 &mpic 32 1 + 08000 0 0 4 &mpic 33 1 /* IDSEL 0x11 */ - 08800 0 0 1 40000 30 1 - 08800 0 0 2 40000 31 1 - 08800 0 0 3 40000 32 1 - 08800 0 0 4 40000 33 1 + 08800 0 0 1 &mpic 30 1 + 08800 0 0 2 &mpic 31 1 + 08800 0 0 3 &mpic 32 1 + 08800 0 0 4 &mpic 33 1 /* IDSEL 0x12 (Slot 1) */ - 09000 0 0 1 40000 30 1 - 09000 0 0 2 40000 31 1 - 09000 0 0 3 40000 32 1 - 09000 0 0 4 40000 33 1 + 09000 0 0 1 &mpic 30 1 + 09000 0 0 2 &mpic 31 1 + 09000 0 0 3 &mpic 32 1 + 09000 0 0 4 &mpic 33 1 /* IDSEL 0x13 (Slot 2) */ - 09800 0 0 1 40000 31 1 - 09800 0 0 2 40000 32 1 - 09800 0 0 3 40000 33 1 - 09800 0 0 4 40000 30 1 + 09800 0 0 1 &mpic 31 1 + 09800 0 0 2 &mpic 32 1 + 09800 0 0 3 &mpic 33 1 + 09800 0 0 4 &mpic 30 1 /* IDSEL 0x14 (Slot 3) */ - 0a000 0 0 1 40000 32 1 - 0a000 0 0 2 40000 33 1 - 0a000 0 0 3 40000 30 1 - 0a000 0 0 4 40000 31 1 + 0a000 0 0 1 &mpic 32 1 + 0a000 0 0 2 &mpic 33 1 + 0a000 0 0 3 &mpic 30 1 + 0a000 0 0 4 &mpic 31 1 /* IDSEL 0x15 (Slot 4) */ - 0a800 0 0 1 40000 33 1 - 0a800 0 0 2 40000 30 1 - 0a800 0 0 3 40000 31 1 - 0a800 0 0 4 40000 32 1 + 0a800 0 0 1 &mpic 33 1 + 0a800 0 0 2 &mpic 30 1 + 0a800 0 0 3 &mpic 31 1 + 0a800 0 0 4 &mpic 32 1 /* Bus 1 (Tundra Bridge) */ /* IDSEL 0x12 (ISA bridge) */ - 19000 0 0 1 40000 30 1 - 19000 0 0 2 40000 31 1 - 19000 0 0 3 40000 32 1 - 19000 0 0 4 40000 33 1>; - interrupt-parent = <40000>; + 19000 0 0 1 &mpic 30 1 + 19000 0 0 2 &mpic 31 1 + 19000 0 0 3 &mpic 32 1 + 19000 0 0 4 &mpic 33 1>; + interrupt-parent = <&mpic>; interrupts = <08 2>; bus-range = <0 0>; ranges = <02000000 0 80000000 80000000 0 20000000 @@ -200,21 +192,20 @@ compatible = "chrp,iic"; big-endian; interrupts = <1>; - interrupt-parent = <8000>; + interrupt-parent = <&pci1>; }; }; pci@9000 { - linux,phandle = <9000>; interrupt-map-mask = ; interrupt-map = < /* IDSEL 0x15 */ - a800 0 0 1 40000 3b 1 - a800 0 0 2 40000 3b 1 - a800 0 0 3 40000 3b 1 - a800 0 0 4 40000 3b 1>; - interrupt-parent = <40000>; + a800 0 0 1 &mpic 3b 1 + a800 0 0 2 &mpic 3b 1 + a800 0 0 3 &mpic 3b 1 + a800 0 0 4 &mpic 3b 1>; + interrupt-parent = <&mpic>; interrupts = <09 2>; bus-range = <0 0>; ranges = <02000000 0 a0000000 a0000000 0 20000000 @@ -228,8 +219,7 @@ device_type = "pci"; }; - pic@40000 { - linux,phandle = <40000>; + mpic: pic@40000 { clock-frequency = <0>; interrupt-controller; #address-cells = <0>; diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts index 893d7957c174..7eb5d81d5eec 100644 --- a/arch/powerpc/boot/dts/mpc8548cds.dts +++ b/arch/powerpc/boot/dts/mpc8548cds.dts @@ -12,16 +12,14 @@ / { model = "MPC8548CDS"; - compatible = "MPC85xxCDS"; + compatible = "MPC8548CDS", "MPC85xxCDS"; #address-cells = <1>; #size-cells = <1>; - linux,phandle = <100>; cpus { #cpus = <1>; #address-cells = <1>; #size-cells = <0>; - linux,phandle = <200>; PowerPC,8548@0 { device_type = "cpu"; @@ -34,13 +32,11 @@ bus-frequency = <0>; // 166 MHz clock-frequency = <0>; // 825 MHz, from uboot 32-bit; - linux,phandle = <201>; }; }; memory { device_type = "memory"; - linux,phandle = <300>; reg = <00000000 08000000>; // 128M at 0x0 }; @@ -58,7 +54,7 @@ compatible = "fsl-i2c"; reg = <3000 100>; interrupts = <1b 2>; - interrupt-parent = <40000>; + interrupt-parent = <&mpic>; dfsrr; }; @@ -68,32 +64,26 @@ device_type = "mdio"; compatible = "gianfar"; reg = <24520 20>; - linux,phandle = <24520>; - ethernet-phy@0 { - linux,phandle = <2452000>; - interrupt-parent = <40000>; + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; interrupts = <35 0>; reg = <0>; device_type = "ethernet-phy"; }; - ethernet-phy@1 { - linux,phandle = <2452001>; - interrupt-parent = <40000>; + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; interrupts = <35 0>; reg = <1>; device_type = "ethernet-phy"; }; - - ethernet-phy@2 { - linux,phandle = <2452002>; - interrupt-parent = <40000>; + phy2: ethernet-phy@2 { + interrupt-parent = <&mpic>; interrupts = <35 0>; reg = <2>; device_type = "ethernet-phy"; }; - ethernet-phy@3 { - linux,phandle = <2452003>; - interrupt-parent = <40000>; + phy3: ethernet-phy@3 { + interrupt-parent = <&mpic>; interrupts = <35 0>; reg = <3>; device_type = "ethernet-phy"; @@ -109,8 +99,8 @@ reg = <24000 1000>; local-mac-address = [ 00 E0 0C 00 73 00 ]; interrupts = ; - interrupt-parent = <40000>; - phy-handle = <2452000>; + interrupt-parent = <&mpic>; + phy-handle = <&phy0>; }; ethernet@25000 { @@ -122,10 +112,11 @@ reg = <25000 1000>; local-mac-address = [ 00 E0 0C 00 73 01 ]; interrupts = <13 2 14 2 18 2>; - interrupt-parent = <40000>; - phy-handle = <2452001>; + interrupt-parent = <&mpic>; + phy-handle = <&phy1>; }; +/* eTSEC 3/4 are currently broken ethernet@26000 { #address-cells = <1>; #size-cells = <0>; @@ -135,11 +126,10 @@ reg = <26000 1000>; local-mac-address = [ 00 E0 0C 00 73 02 ]; interrupts = ; - interrupt-parent = <40000>; - phy-handle = <2452001>; + interrupt-parent = <&mpic>; + phy-handle = <&phy2>; }; -/* eTSEC 4 is currently broken ethernet@27000 { #address-cells = <1>; #size-cells = <0>; @@ -149,8 +139,8 @@ reg = <27000 1000>; local-mac-address = [ 00 E0 0C 00 73 03 ]; interrupts = <15 2 16 2 17 2>; - interrupt-parent = <40000>; - phy-handle = <2452001>; + interrupt-parent = <&mpic>; + phy-handle = <&phy3>; }; */ @@ -160,7 +150,7 @@ reg = <4500 100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? interrupts = <1a 2>; - interrupt-parent = <40000>; + interrupt-parent = <&mpic>; }; serial@4600 { @@ -169,57 +159,56 @@ reg = <4600 100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? interrupts = <1a 2>; - interrupt-parent = <40000>; + interrupt-parent = <&mpic>; }; - pci@8000 { - linux,phandle = <8000>; + pci1: pci@8000 { interrupt-map-mask = <1f800 0 0 7>; interrupt-map = < /* IDSEL 0x10 */ - 08000 0 0 1 40000 30 1 - 08000 0 0 2 40000 31 1 - 08000 0 0 3 40000 32 1 - 08000 0 0 4 40000 33 1 + 08000 0 0 1 &mpic 30 1 + 08000 0 0 2 &mpic 31 1 + 08000 0 0 3 &mpic 32 1 + 08000 0 0 4 &mpic 33 1 /* IDSEL 0x11 */ - 08800 0 0 1 40000 30 1 - 08800 0 0 2 40000 31 1 - 08800 0 0 3 40000 32 1 - 08800 0 0 4 40000 33 1 + 08800 0 0 1 &mpic 30 1 + 08800 0 0 2 &mpic 31 1 + 08800 0 0 3 &mpic 32 1 + 08800 0 0 4 &mpic 33 1 /* IDSEL 0x12 (Slot 1) */ - 09000 0 0 1 40000 30 1 - 09000 0 0 2 40000 31 1 - 09000 0 0 3 40000 32 1 - 09000 0 0 4 40000 33 1 + 09000 0 0 1 &mpic 30 1 + 09000 0 0 2 &mpic 31 1 + 09000 0 0 3 &mpic 32 1 + 09000 0 0 4 &mpic 33 1 /* IDSEL 0x13 (Slot 2) */ - 09800 0 0 1 40000 31 1 - 09800 0 0 2 40000 32 1 - 09800 0 0 3 40000 33 1 - 09800 0 0 4 40000 30 1 + 09800 0 0 1 &mpic 31 1 + 09800 0 0 2 &mpic 32 1 + 09800 0 0 3 &mpic 33 1 + 09800 0 0 4 &mpic 30 1 /* IDSEL 0x14 (Slot 3) */ - 0a000 0 0 1 40000 32 1 - 0a000 0 0 2 40000 33 1 - 0a000 0 0 3 40000 30 1 - 0a000 0 0 4 40000 31 1 + 0a000 0 0 1 &mpic 32 1 + 0a000 0 0 2 &mpic 33 1 + 0a000 0 0 3 &mpic 30 1 + 0a000 0 0 4 &mpic 31 1 /* IDSEL 0x15 (Slot 4) */ - 0a800 0 0 1 40000 33 1 - 0a800 0 0 2 40000 30 1 - 0a800 0 0 3 40000 31 1 - 0a800 0 0 4 40000 32 1 + 0a800 0 0 1 &mpic 33 1 + 0a800 0 0 2 &mpic 30 1 + 0a800 0 0 3 &mpic 31 1 + 0a800 0 0 4 &mpic 32 1 /* Bus 1 (Tundra Bridge) */ /* IDSEL 0x12 (ISA bridge) */ - 19000 0 0 1 40000 30 1 - 19000 0 0 2 40000 31 1 - 19000 0 0 3 40000 32 1 - 19000 0 0 4 40000 33 1>; - interrupt-parent = <40000>; + 19000 0 0 1 &mpic 30 1 + 19000 0 0 2 &mpic 31 1 + 19000 0 0 3 &mpic 32 1 + 19000 0 0 4 &mpic 33 1>; + interrupt-parent = <&mpic>; interrupts = <08 2>; bus-range = <0 0>; ranges = <02000000 0 80000000 80000000 0 20000000 @@ -243,21 +232,20 @@ compatible = "chrp,iic"; big-endian; interrupts = <1>; - interrupt-parent = <8000>; + interrupt-parent = <&pci1>; }; }; pci@9000 { - linux,phandle = <9000>; interrupt-map-mask = ; interrupt-map = < /* IDSEL 0x15 */ - a800 0 0 1 40000 3b 1 - a800 0 0 2 40000 3b 1 - a800 0 0 3 40000 3b 1 - a800 0 0 4 40000 3b 1>; - interrupt-parent = <40000>; + a800 0 0 1 &mpic 3b 1 + a800 0 0 2 &mpic 3b 1 + a800 0 0 3 &mpic 3b 1 + a800 0 0 4 &mpic 3b 1>; + interrupt-parent = <&mpic>; interrupts = <09 2>; bus-range = <0 0>; ranges = <02000000 0 a0000000 a0000000 0 20000000 @@ -271,8 +259,7 @@ device_type = "pci"; }; - pic@40000 { - linux,phandle = <40000>; + mpic: pic@40000 { clock-frequency = <0>; interrupt-controller; #address-cells = <0>; diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts index 118f5a887651..5f9c102a0ab4 100644 --- a/arch/powerpc/boot/dts/mpc8555cds.dts +++ b/arch/powerpc/boot/dts/mpc8555cds.dts @@ -12,16 +12,14 @@ / { model = "MPC8555CDS"; - compatible = "MPC85xxCDS"; + compatible = "MPC8555CDS", "MPC85xxCDS"; #address-cells = <1>; #size-cells = <1>; - linux,phandle = <100>; cpus { #cpus = <1>; #address-cells = <1>; #size-cells = <0>; - linux,phandle = <200>; PowerPC,8555@0 { device_type = "cpu"; @@ -34,13 +32,11 @@ bus-frequency = <0>; // 166 MHz clock-frequency = <0>; // 825 MHz, from uboot 32-bit; - linux,phandle = <201>; }; }; memory { device_type = "memory"; - linux,phandle = <300>; reg = <00000000 08000000>; // 128M at 0x0 }; @@ -58,7 +54,7 @@ compatible = "fsl-i2c"; reg = <3000 100>; interrupts = <1b 2>; - interrupt-parent = <40000>; + interrupt-parent = <&mpic>; dfsrr; }; @@ -68,17 +64,14 @@ device_type = "mdio"; compatible = "gianfar"; reg = <24520 20>; - linux,phandle = <24520>; - ethernet-phy@0 { - linux,phandle = <2452000>; - interrupt-parent = <40000>; + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; interrupts = <35 0>; reg = <0>; device_type = "ethernet-phy"; }; - ethernet-phy@1 { - linux,phandle = <2452001>; - interrupt-parent = <40000>; + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; interrupts = <35 0>; reg = <1>; device_type = "ethernet-phy"; @@ -94,8 +87,8 @@ reg = <24000 1000>; local-mac-address = [ 00 E0 0C 00 73 00 ]; interrupts = <0d 2 0e 2 12 2>; - interrupt-parent = <40000>; - phy-handle = <2452000>; + interrupt-parent = <&mpic>; + phy-handle = <&phy0>; }; ethernet@25000 { @@ -107,8 +100,8 @@ reg = <25000 1000>; local-mac-address = [ 00 E0 0C 00 73 01 ]; interrupts = <13 2 14 2 18 2>; - interrupt-parent = <40000>; - phy-handle = <2452001>; + interrupt-parent = <&mpic>; + phy-handle = <&phy1>; }; serial@4500 { @@ -117,7 +110,7 @@ reg = <4500 100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? interrupts = <1a 2>; - interrupt-parent = <40000>; + interrupt-parent = <&mpic>; }; serial@4600 { @@ -126,57 +119,56 @@ reg = <4600 100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? interrupts = <1a 2>; - interrupt-parent = <40000>; + interrupt-parent = <&mpic>; }; - pci@8000 { - linux,phandle = <8000>; + pci1: pci@8000 { interrupt-map-mask = <1f800 0 0 7>; interrupt-map = < /* IDSEL 0x10 */ - 08000 0 0 1 40000 30 1 - 08000 0 0 2 40000 31 1 - 08000 0 0 3 40000 32 1 - 08000 0 0 4 40000 33 1 + 08000 0 0 1 &mpic 30 1 + 08000 0 0 2 &mpic 31 1 + 08000 0 0 3 &mpic 32 1 + 08000 0 0 4 &mpic 33 1 /* IDSEL 0x11 */ - 08800 0 0 1 40000 30 1 - 08800 0 0 2 40000 31 1 - 08800 0 0 3 40000 32 1 - 08800 0 0 4 40000 33 1 + 08800 0 0 1 &mpic 30 1 + 08800 0 0 2 &mpic 31 1 + 08800 0 0 3 &mpic 32 1 + 08800 0 0 4 &mpic 33 1 /* IDSEL 0x12 (Slot 1) */ - 09000 0 0 1 40000 30 1 - 09000 0 0 2 40000 31 1 - 09000 0 0 3 40000 32 1 - 09000 0 0 4 40000 33 1 + 09000 0 0 1 &mpic 30 1 + 09000 0 0 2 &mpic 31 1 + 09000 0 0 3 &mpic 32 1 + 09000 0 0 4 &mpic 33 1 /* IDSEL 0x13 (Slot 2) */ - 09800 0 0 1 40000 31 1 - 09800 0 0 2 40000 32 1 - 09800 0 0 3 40000 33 1 - 09800 0 0 4 40000 30 1 + 09800 0 0 1 &mpic 31 1 + 09800 0 0 2 &mpic 32 1 + 09800 0 0 3 &mpic 33 1 + 09800 0 0 4 &mpic 30 1 /* IDSEL 0x14 (Slot 3) */ - 0a000 0 0 1 40000 32 1 - 0a000 0 0 2 40000 33 1 - 0a000 0 0 3 40000 30 1 - 0a000 0 0 4 40000 31 1 + 0a000 0 0 1 &mpic 32 1 + 0a000 0 0 2 &mpic 33 1 + 0a000 0 0 3 &mpic 30 1 + 0a000 0 0 4 &mpic 31 1 /* IDSEL 0x15 (Slot 4) */ - 0a800 0 0 1 40000 33 1 - 0a800 0 0 2 40000 30 1 - 0a800 0 0 3 40000 31 1 - 0a800 0 0 4 40000 32 1 + 0a800 0 0 1 &mpic 33 1 + 0a800 0 0 2 &mpic 30 1 + 0a800 0 0 3 &mpic 31 1 + 0a800 0 0 4 &mpic 32 1 /* Bus 1 (Tundra Bridge) */ /* IDSEL 0x12 (ISA bridge) */ - 19000 0 0 1 40000 30 1 - 19000 0 0 2 40000 31 1 - 19000 0 0 3 40000 32 1 - 19000 0 0 4 40000 33 1>; - interrupt-parent = <40000>; + 19000 0 0 1 &mpic 30 1 + 19000 0 0 2 &mpic 31 1 + 19000 0 0 3 &mpic 32 1 + 19000 0 0 4 &mpic 33 1>; + interrupt-parent = <&mpic>; interrupts = <08 2>; bus-range = <0 0>; ranges = <02000000 0 80000000 80000000 0 20000000 @@ -200,21 +192,20 @@ compatible = "chrp,iic"; big-endian; interrupts = <1>; - interrupt-parent = <8000>; + interrupt-parent = <&pci1>; }; }; pci@9000 { - linux,phandle = <9000>; interrupt-map-mask = ; interrupt-map = < /* IDSEL 0x15 */ - a800 0 0 1 40000 3b 1 - a800 0 0 2 40000 3b 1 - a800 0 0 3 40000 3b 1 - a800 0 0 4 40000 3b 1>; - interrupt-parent = <40000>; + a800 0 0 1 &mpic 3b 1 + a800 0 0 2 &mpic 3b 1 + a800 0 0 3 &mpic 3b 1 + a800 0 0 4 &mpic 3b 1>; + interrupt-parent = <&mpic>; interrupts = <09 2>; bus-range = <0 0>; ranges = <02000000 0 a0000000 a0000000 0 20000000 @@ -228,8 +219,7 @@ device_type = "pci"; }; - pic@40000 { - linux,phandle = <40000>; + mpic: pic@40000 { clock-frequency = <0>; interrupt-controller; #address-cells = <0>; diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts index c74d6ebc5c8a..10502638b0e9 100644 --- a/arch/powerpc/boot/dts/mpc8560ads.dts +++ b/arch/powerpc/boot/dts/mpc8560ads.dts @@ -12,16 +12,14 @@ / { model = "MPC8560ADS"; - compatible = "MPC85xxADS"; + compatible = "MPC8560ADS", "MPC85xxADS"; #address-cells = <1>; #size-cells = <1>; - linux,phandle = <100>; cpus { #cpus = <1>; #address-cells = <1>; #size-cells = <0>; - linux,phandle = <200>; PowerPC,8560@0 { device_type = "cpu"; @@ -34,13 +32,11 @@ bus-frequency = <13ab6680>; clock-frequency = <312c8040>; 32-bit; - linux,phandle = <201>; }; }; memory { device_type = "memory"; - linux,phandle = <300>; reg = <00000000 10000000>; }; @@ -57,33 +53,28 @@ device_type = "mdio"; compatible = "gianfar"; reg = <24520 20>; - linux,phandle = <24520>; #address-cells = <1>; #size-cells = <0>; - ethernet-phy@0 { - linux,phandle = <2452000>; - interrupt-parent = <40000>; + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; interrupts = <35 1>; reg = <0>; device_type = "ethernet-phy"; }; - ethernet-phy@1 { - linux,phandle = <2452001>; - interrupt-parent = <40000>; + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; interrupts = <35 1>; reg = <1>; device_type = "ethernet-phy"; }; - ethernet-phy@2 { - linux,phandle = <2452002>; - interrupt-parent = <40000>; + phy2: ethernet-phy@2 { + interrupt-parent = <&mpic>; interrupts = <37 1>; reg = <2>; device_type = "ethernet-phy"; }; - ethernet-phy@3 { - linux,phandle = <2452003>; - interrupt-parent = <40000>; + phy3: ethernet-phy@3 { + interrupt-parent = <&mpic>; interrupts = <37 1>; reg = <3>; device_type = "ethernet-phy"; @@ -97,8 +88,8 @@ reg = <24000 1000>; address = [ 00 00 0C 00 00 FD ]; interrupts = ; - interrupt-parent = <40000>; - phy-handle = <2452000>; + interrupt-parent = <&mpic>; + phy-handle = <&phy0>; }; ethernet@25000 { @@ -110,12 +101,11 @@ reg = <25000 1000>; address = [ 00 00 0C 00 01 FD ]; interrupts = <13 2 14 2 18 2>; - interrupt-parent = <40000>; - phy-handle = <2452001>; + interrupt-parent = <&mpic>; + phy-handle = <&phy1>; }; pci@8000 { - linux,phandle = <8000>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; @@ -127,96 +117,94 @@ interrupt-map = < /* IDSEL 0x2 */ - 1000 0 0 1 40000 31 1 - 1000 0 0 2 40000 32 1 - 1000 0 0 3 40000 33 1 - 1000 0 0 4 40000 34 1 + 1000 0 0 1 &mpic 31 1 + 1000 0 0 2 &mpic 32 1 + 1000 0 0 3 &mpic 33 1 + 1000 0 0 4 &mpic 34 1 /* IDSEL 0x3 */ - 1800 0 0 1 40000 34 1 - 1800 0 0 2 40000 31 1 - 1800 0 0 3 40000 32 1 - 1800 0 0 4 40000 33 1 + 1800 0 0 1 &mpic 34 1 + 1800 0 0 2 &mpic 31 1 + 1800 0 0 3 &mpic 32 1 + 1800 0 0 4 &mpic 33 1 /* IDSEL 0x4 */ - 2000 0 0 1 40000 33 1 - 2000 0 0 2 40000 34 1 - 2000 0 0 3 40000 31 1 - 2000 0 0 4 40000 32 1 + 2000 0 0 1 &mpic 33 1 + 2000 0 0 2 &mpic 34 1 + 2000 0 0 3 &mpic 31 1 + 2000 0 0 4 &mpic 32 1 /* IDSEL 0x5 */ - 2800 0 0 1 40000 32 1 - 2800 0 0 2 40000 33 1 - 2800 0 0 3 40000 34 1 - 2800 0 0 4 40000 31 1 + 2800 0 0 1 &mpic 32 1 + 2800 0 0 2 &mpic 33 1 + 2800 0 0 3 &mpic 34 1 + 2800 0 0 4 &mpic 31 1 /* IDSEL 12 */ - 6000 0 0 1 40000 31 1 - 6000 0 0 2 40000 32 1 - 6000 0 0 3 40000 33 1 - 6000 0 0 4 40000 34 1 + 6000 0 0 1 &mpic 31 1 + 6000 0 0 2 &mpic 32 1 + 6000 0 0 3 &mpic 33 1 + 6000 0 0 4 &mpic 34 1 /* IDSEL 13 */ - 6800 0 0 1 40000 34 1 - 6800 0 0 2 40000 31 1 - 6800 0 0 3 40000 32 1 - 6800 0 0 4 40000 33 1 + 6800 0 0 1 &mpic 34 1 + 6800 0 0 2 &mpic 31 1 + 6800 0 0 3 &mpic 32 1 + 6800 0 0 4 &mpic 33 1 /* IDSEL 14*/ - 7000 0 0 1 40000 33 1 - 7000 0 0 2 40000 34 1 - 7000 0 0 3 40000 31 1 - 7000 0 0 4 40000 32 1 + 7000 0 0 1 &mpic 33 1 + 7000 0 0 2 &mpic 34 1 + 7000 0 0 3 &mpic 31 1 + 7000 0 0 4 &mpic 32 1 /* IDSEL 15 */ - 7800 0 0 1 40000 32 1 - 7800 0 0 2 40000 33 1 - 7800 0 0 3 40000 34 1 - 7800 0 0 4 40000 31 1 + 7800 0 0 1 &mpic 32 1 + 7800 0 0 2 &mpic 33 1 + 7800 0 0 3 &mpic 34 1 + 7800 0 0 4 &mpic 31 1 /* IDSEL 18 */ - 9000 0 0 1 40000 31 1 - 9000 0 0 2 40000 32 1 - 9000 0 0 3 40000 33 1 - 9000 0 0 4 40000 34 1 + 9000 0 0 1 &mpic 31 1 + 9000 0 0 2 &mpic 32 1 + 9000 0 0 3 &mpic 33 1 + 9000 0 0 4 &mpic 34 1 /* IDSEL 19 */ - 9800 0 0 1 40000 34 1 - 9800 0 0 2 40000 31 1 - 9800 0 0 3 40000 32 1 - 9800 0 0 4 40000 33 1 + 9800 0 0 1 &mpic 34 1 + 9800 0 0 2 &mpic 31 1 + 9800 0 0 3 &mpic 32 1 + 9800 0 0 4 &mpic 33 1 /* IDSEL 20 */ - a000 0 0 1 40000 33 1 - a000 0 0 2 40000 34 1 - a000 0 0 3 40000 31 1 - a000 0 0 4 40000 32 1 + a000 0 0 1 &mpic 33 1 + a000 0 0 2 &mpic 34 1 + a000 0 0 3 &mpic 31 1 + a000 0 0 4 &mpic 32 1 /* IDSEL 21 */ - a800 0 0 1 40000 32 1 - a800 0 0 2 40000 33 1 - a800 0 0 3 40000 34 1 - a800 0 0 4 40000 31 1>; + a800 0 0 1 &mpic 32 1 + a800 0 0 2 &mpic 33 1 + a800 0 0 3 &mpic 34 1 + a800 0 0 4 &mpic 31 1>; - interrupt-parent = <40000>; + interrupt-parent = <&mpic>; interrupts = <8 0>; bus-range = <0 0>; ranges = <02000000 0 80000000 80000000 0 20000000 01000000 0 00000000 e2000000 0 01000000>; }; - pic@40000 { - linux,phandle = <40000>; + mpic: pic@40000 { interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; - reg = <40000 20100>; + reg = <40000 40000>; built-in; device_type = "open-pic"; }; cpm@e0000000 { - linux,phandle = ; #address-cells = <1>; #size-cells = <1>; #interrupt-cells = <2>; @@ -227,13 +215,12 @@ command-proc = <919c0>; brg-frequency = <9d5b340>; - pic@90c00 { - linux,phandle = <90c00>; + cpmpic: pic@90c00 { interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; interrupts = <1e 0>; - interrupt-parent = <40000>; + interrupt-parent = <&mpic>; reg = <90c00 80>; built-in; device_type = "cpm-pic"; @@ -250,7 +237,7 @@ tx-clock = <1>; current-speed = <1c200>; interrupts = <28 8>; - interrupt-parent = <90c00>; + interrupt-parent = <&cpmpic>; }; scc@91a20 { @@ -264,7 +251,7 @@ tx-clock = <2>; current-speed = <1c200>; interrupts = <29 8>; - interrupt-parent = <90c00>; + interrupt-parent = <&cpmpic>; }; fcc@91320 { @@ -278,8 +265,8 @@ rx-clock = <15>; tx-clock = <16>; interrupts = <21 8>; - interrupt-parent = <90c00>; - phy-handle = <2452002>; + interrupt-parent = <&cpmpic>; + phy-handle = <&phy2>; }; fcc@91340 { @@ -293,8 +280,8 @@ rx-clock = <17>; tx-clock = <18>; interrupts = <22 8>; - interrupt-parent = <90c00>; - phy-handle = <2452003>; + interrupt-parent = <&cpmpic>; + phy-handle = <&phy3>; }; }; }; diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts index 06d24653e422..bf49d8c997b9 100644 --- a/arch/powerpc/boot/dts/mpc8568mds.dts +++ b/arch/powerpc/boot/dts/mpc8568mds.dts @@ -16,16 +16,14 @@ / { model = "MPC8568EMDS"; - compatible = "MPC85xxMDS"; + compatible = "MPC8568EMDS", "MPC85xxMDS"; #address-cells = <1>; #size-cells = <1>; - linux,phandle = <100>; cpus { #cpus = <1>; #address-cells = <1>; #size-cells = <0>; - linux,phandle = <200>; PowerPC,8568@0 { device_type = "cpu"; @@ -38,13 +36,11 @@ bus-frequency = <0>; clock-frequency = <0>; 32-bit; - linux,phandle = <201>; }; }; memory { device_type = "memory"; - linux,phandle = <300>; reg = <00000000 10000000>; }; @@ -67,7 +63,7 @@ compatible = "fsl-i2c"; reg = <3000 100>; interrupts = <1b 2>; - interrupt-parent = <40000>; + interrupt-parent = <&mpic>; dfsrr; }; @@ -76,7 +72,7 @@ compatible = "fsl-i2c"; reg = <3100 100>; interrupts = <1b 2>; - interrupt-parent = <40000>; + interrupt-parent = <&mpic>; dfsrr; }; @@ -86,32 +82,26 @@ device_type = "mdio"; compatible = "gianfar"; reg = <24520 20>; - linux,phandle = <24520>; - ethernet-phy@0 { - linux,phandle = <2452000>; - interrupt-parent = <40000>; + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; interrupts = <31 1>; reg = <0>; device_type = "ethernet-phy"; }; - ethernet-phy@1 { - linux,phandle = <2452001>; - interrupt-parent = <40000>; + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; interrupts = <32 1>; reg = <1>; device_type = "ethernet-phy"; }; - - ethernet-phy@2 { - linux,phandle = <2452002>; - interrupt-parent = <40000>; + phy2: ethernet-phy@2 { + interrupt-parent = <&mpic>; interrupts = <31 1>; reg = <2>; device_type = "ethernet-phy"; }; - ethernet-phy@3 { - linux,phandle = <2452003>; - interrupt-parent = <40000>; + phy3: ethernet-phy@3 { + interrupt-parent = <&mpic>; interrupts = <32 1>; reg = <3>; device_type = "ethernet-phy"; @@ -127,8 +117,8 @@ reg = <24000 1000>; mac-address = [ 00 00 00 00 00 00 ]; interrupts = ; - interrupt-parent = <40000>; - phy-handle = <2452002>; + interrupt-parent = <&mpic>; + phy-handle = <&phy2>; }; ethernet@25000 { @@ -140,8 +130,8 @@ reg = <25000 1000>; mac-address = [ 00 00 00 00 00 00]; interrupts = <13 2 14 2 18 2>; - interrupt-parent = <40000>; - phy-handle = <2452003>; + interrupt-parent = <&mpic>; + phy-handle = <&phy3>; }; serial@4500 { @@ -150,7 +140,7 @@ reg = <4500 100>; clock-frequency = <0>; interrupts = <1a 2>; - interrupt-parent = <40000>; + interrupt-parent = <&mpic>; }; serial@4600 { @@ -159,7 +149,7 @@ reg = <4600 100>; clock-frequency = <0>; interrupts = <1a 2>; - interrupt-parent = <40000>; + interrupt-parent = <&mpic>; }; crypto@30000 { @@ -168,15 +158,14 @@ compatible = "talitos"; reg = <30000 f000>; interrupts = <1d 2>; - interrupt-parent = <40000>; + interrupt-parent = <&mpic>; num-channels = <4>; channel-fifo-len = <18>; exec-units-mask = <000000fe>; descriptor-types-mask = <012b0ebf>; }; - pic@40000 { - linux,phandle = <40000>; + mpic: pic@40000 { clock-frequency = <0>; interrupt-controller; #address-cells = <0>; @@ -192,8 +181,7 @@ device_type = "par_io"; num-ports = <7>; - ucc_pin@01 { - linux,phandle = ; + pio1: ucc_pin@01 { pio-map = < /* port pin dir open_drain assignment has_irq */ 4 0a 1 0 2 0 /* TxD0 */ @@ -220,8 +208,7 @@ 4 13 1 0 2 0 /* GTX_CLK */ 1 1f 2 0 3 0>; /* GTX125 */ }; - ucc_pin@02 { - linux,phandle = ; + pio2: ucc_pin@02 { pio-map = < /* port pin dir open_drain assignment has_irq */ 5 0a 1 0 2 0 /* TxD0 */ @@ -277,7 +264,7 @@ compatible = "fsl_spi"; reg = <4c0 40>; interrupts = <2>; - interrupt-parent = <80>; + interrupt-parent = <&qeic>; mode = "cpu"; }; @@ -286,7 +273,7 @@ compatible = "fsl_spi"; reg = <500 40>; interrupts = <1>; - interrupt-parent = <80>; + interrupt-parent = <&qeic>; mode = "cpu"; }; @@ -297,12 +284,12 @@ device-id = <1>; reg = <2000 200>; interrupts = <20>; - interrupt-parent = <80>; + interrupt-parent = <&qeic>; mac-address = [ 00 04 9f 00 23 23 ]; rx-clock = <0>; tx-clock = <19>; - phy-handle = <212000>; - pio-handle = ; + phy-handle = <&qe_phy0>; + pio-handle = <&pio1>; }; ucc@3000 { @@ -312,12 +299,12 @@ device-id = <2>; reg = <3000 200>; interrupts = <21>; - interrupt-parent = <80>; + interrupt-parent = <&qeic>; mac-address = [ 00 11 22 33 44 55 ]; rx-clock = <0>; tx-clock = <14>; - phy-handle = <212001>; - pio-handle = ; + phy-handle = <&qe_phy1>; + pio-handle = <&pio2>; }; mdio@2120 { @@ -329,33 +316,29 @@ /* These are the same PHYs as on * gianfar's MDIO bus */ - ethernet-phy@00 { - linux,phandle = <212000>; - interrupt-parent = <40000>; + qe_phy0: ethernet-phy@00 { + interrupt-parent = <&mpic>; interrupts = <31 1>; reg = <0>; device_type = "ethernet-phy"; interface = <6>; //ENET_1000_GMII }; - ethernet-phy@01 { - linux,phandle = <212001>; - interrupt-parent = <40000>; + qe_phy1: ethernet-phy@01 { + interrupt-parent = <&mpic>; interrupts = <32 1>; reg = <1>; device_type = "ethernet-phy"; interface = <6>; }; - ethernet-phy@02 { - linux,phandle = <212002>; - interrupt-parent = <40000>; + qe_phy2: ethernet-phy@02 { + interrupt-parent = <&mpic>; interrupts = <31 1>; reg = <2>; device_type = "ethernet-phy"; interface = <6>; //ENET_1000_GMII }; - ethernet-phy@03 { - linux,phandle = <212003>; - interrupt-parent = <40000>; + qe_phy3: ethernet-phy@03 { + interrupt-parent = <&mpic>; interrupts = <32 1>; reg = <3>; device_type = "ethernet-phy"; @@ -363,8 +346,7 @@ }; }; - qeic@80 { - linux,phandle = <80>; + qeic: qeic@80 { interrupt-controller; device_type = "qeic"; #address-cells = <0>; @@ -373,7 +355,7 @@ built-in; big-endian; interrupts = <1e 2 1e 2>; //high:30 low:30 - interrupt-parent = <40000>; + interrupt-parent = <&mpic>; }; }; -- cgit v1.2.3 From 5af68af5bcd34e3569fd82ef4676de5bc03e18c0 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Fri, 16 Feb 2007 22:31:21 -0600 Subject: [POWERPC] QE: clean up ucc_slow.c and ucc_fast.c Refactored and cleaned up ucc_fast.c and ucc_slow.c so that the two files look more alike and are easier to read. Removed uccf_printk() and related functions, because they were just front-ends to printk(). Fixed some spacing and tabbing issues. Minor optimizations of some code. Changed the type of some variables to their proper type (mostly buffer descriptors). Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala --- arch/powerpc/sysdev/qe_lib/ucc_fast.c | 163 +++++++++++++--------------------- arch/powerpc/sysdev/qe_lib/ucc_slow.c | 137 +++++++++++----------------- 2 files changed, 114 insertions(+), 186 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/sysdev/qe_lib/ucc_fast.c b/arch/powerpc/sysdev/qe_lib/ucc_fast.c index e657559bea93..a457ac1c6639 100644 --- a/arch/powerpc/sysdev/qe_lib/ucc_fast.c +++ b/arch/powerpc/sysdev/qe_lib/ucc_fast.c @@ -1,13 +1,12 @@ /* - * arch/powerpc/sysdev/qe_lib/ucc_fast.c - * - * QE UCC Fast API Set - UCC Fast specific routines implementations. - * * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved. * * Authors: Shlomi Gridish * Li Yang * + * Description: + * QE UCC Fast API Set - UCC Fast specific routines implementations. + * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your @@ -27,79 +26,61 @@ #include #include -#define uccf_printk(level, format, arg...) \ - printk(level format "\n", ## arg) - -#define uccf_dbg(format, arg...) \ - uccf_printk(KERN_DEBUG , format , ## arg) -#define uccf_err(format, arg...) \ - uccf_printk(KERN_ERR , format , ## arg) -#define uccf_info(format, arg...) \ - uccf_printk(KERN_INFO , format , ## arg) -#define uccf_warn(format, arg...) \ - uccf_printk(KERN_WARNING , format , ## arg) - -#ifdef UCCF_VERBOSE_DEBUG -#define uccf_vdbg uccf_dbg -#else -#define uccf_vdbg(fmt, args...) do { } while (0) -#endif /* UCCF_VERBOSE_DEBUG */ - void ucc_fast_dump_regs(struct ucc_fast_private * uccf) { - uccf_info("UCC%d Fast registers:", uccf->uf_info->ucc_num); - uccf_info("Base address: 0x%08x", (u32) uccf->uf_regs); + printk(KERN_INFO "UCC%d Fast registers:", uccf->uf_info->ucc_num); + printk(KERN_INFO "Base address: 0x%08x", (u32) uccf->uf_regs); - uccf_info("gumr : addr - 0x%08x, val - 0x%08x", + printk(KERN_INFO "gumr : addr - 0x%08x, val - 0x%08x", (u32) & uccf->uf_regs->gumr, in_be32(&uccf->uf_regs->gumr)); - uccf_info("upsmr : addr - 0x%08x, val - 0x%08x", + printk(KERN_INFO "upsmr : addr - 0x%08x, val - 0x%08x", (u32) & uccf->uf_regs->upsmr, in_be32(&uccf->uf_regs->upsmr)); - uccf_info("utodr : addr - 0x%08x, val - 0x%04x", + printk(KERN_INFO "utodr : addr - 0x%08x, val - 0x%04x", (u32) & uccf->uf_regs->utodr, in_be16(&uccf->uf_regs->utodr)); - uccf_info("udsr : addr - 0x%08x, val - 0x%04x", + printk(KERN_INFO "udsr : addr - 0x%08x, val - 0x%04x", (u32) & uccf->uf_regs->udsr, in_be16(&uccf->uf_regs->udsr)); - uccf_info("ucce : addr - 0x%08x, val - 0x%08x", + printk(KERN_INFO "ucce : addr - 0x%08x, val - 0x%08x", (u32) & uccf->uf_regs->ucce, in_be32(&uccf->uf_regs->ucce)); - uccf_info("uccm : addr - 0x%08x, val - 0x%08x", + printk(KERN_INFO "uccm : addr - 0x%08x, val - 0x%08x", (u32) & uccf->uf_regs->uccm, in_be32(&uccf->uf_regs->uccm)); - uccf_info("uccs : addr - 0x%08x, val - 0x%02x", + printk(KERN_INFO "uccs : addr - 0x%08x, val - 0x%02x", (u32) & uccf->uf_regs->uccs, uccf->uf_regs->uccs); - uccf_info("urfb : addr - 0x%08x, val - 0x%08x", + printk(KERN_INFO "urfb : addr - 0x%08x, val - 0x%08x", (u32) & uccf->uf_regs->urfb, in_be32(&uccf->uf_regs->urfb)); - uccf_info("urfs : addr - 0x%08x, val - 0x%04x", + printk(KERN_INFO "urfs : addr - 0x%08x, val - 0x%04x", (u32) & uccf->uf_regs->urfs, in_be16(&uccf->uf_regs->urfs)); - uccf_info("urfet : addr - 0x%08x, val - 0x%04x", + printk(KERN_INFO "urfet : addr - 0x%08x, val - 0x%04x", (u32) & uccf->uf_regs->urfet, in_be16(&uccf->uf_regs->urfet)); - uccf_info("urfset: addr - 0x%08x, val - 0x%04x", + printk(KERN_INFO "urfset: addr - 0x%08x, val - 0x%04x", (u32) & uccf->uf_regs->urfset, in_be16(&uccf->uf_regs->urfset)); - uccf_info("utfb : addr - 0x%08x, val - 0x%08x", + printk(KERN_INFO "utfb : addr - 0x%08x, val - 0x%08x", (u32) & uccf->uf_regs->utfb, in_be32(&uccf->uf_regs->utfb)); - uccf_info("utfs : addr - 0x%08x, val - 0x%04x", + printk(KERN_INFO "utfs : addr - 0x%08x, val - 0x%04x", (u32) & uccf->uf_regs->utfs, in_be16(&uccf->uf_regs->utfs)); - uccf_info("utfet : addr - 0x%08x, val - 0x%04x", + printk(KERN_INFO "utfet : addr - 0x%08x, val - 0x%04x", (u32) & uccf->uf_regs->utfet, in_be16(&uccf->uf_regs->utfet)); - uccf_info("utftt : addr - 0x%08x, val - 0x%04x", + printk(KERN_INFO "utftt : addr - 0x%08x, val - 0x%04x", (u32) & uccf->uf_regs->utftt, in_be16(&uccf->uf_regs->utftt)); - uccf_info("utpt : addr - 0x%08x, val - 0x%04x", + printk(KERN_INFO "utpt : addr - 0x%08x, val - 0x%04x", (u32) & uccf->uf_regs->utpt, in_be16(&uccf->uf_regs->utpt)); - uccf_info("urtry : addr - 0x%08x, val - 0x%08x", + printk(KERN_INFO "urtry : addr - 0x%08x, val - 0x%08x", (u32) & uccf->uf_regs->urtry, in_be32(&uccf->uf_regs->urtry)); - uccf_info("guemr : addr - 0x%08x, val - 0x%02x", + printk(KERN_INFO "guemr : addr - 0x%08x, val - 0x%02x", (u32) & uccf->uf_regs->guemr, uccf->uf_regs->guemr); } u32 ucc_fast_get_qe_cr_subblock(int uccf_num) { switch (uccf_num) { - case 0: return QE_CR_SUBBLOCK_UCCFAST1; + case 0: return QE_CR_SUBBLOCK_UCCFAST1; case 1: return QE_CR_SUBBLOCK_UCCFAST2; case 2: return QE_CR_SUBBLOCK_UCCFAST3; case 3: return QE_CR_SUBBLOCK_UCCFAST4; case 4: return QE_CR_SUBBLOCK_UCCFAST5; case 5: return QE_CR_SUBBLOCK_UCCFAST6; case 6: return QE_CR_SUBBLOCK_UCCFAST7; - case 7: return QE_CR_SUBBLOCK_UCCFAST8; + case 7: return QE_CR_SUBBLOCK_UCCFAST8; default: return QE_CR_SUBBLOCK_INVALID; } } @@ -153,84 +134,72 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc { struct ucc_fast_private *uccf; struct ucc_fast *uf_regs; - u32 gumr = 0; + u32 gumr; int ret; - uccf_vdbg("%s: IN", __FUNCTION__); - if (!uf_info) return -EINVAL; /* check if the UCC port number is in range. */ if ((uf_info->ucc_num < 0) || (uf_info->ucc_num > UCC_MAX_NUM - 1)) { - uccf_err("ucc_fast_init: Illegal UCC number!"); + printk(KERN_ERR "%s: illegal UCC number", __FUNCTION__); return -EINVAL; } /* Check that 'max_rx_buf_length' is properly aligned (4). */ if (uf_info->max_rx_buf_length & (UCC_FAST_MRBLR_ALIGNMENT - 1)) { - uccf_err("ucc_fast_init: max_rx_buf_length not aligned."); + printk(KERN_ERR "%s: max_rx_buf_length not aligned", __FUNCTION__); return -EINVAL; } /* Validate Virtual Fifo register values */ if (uf_info->urfs < UCC_FAST_URFS_MIN_VAL) { - uccf_err - ("ucc_fast_init: Virtual Fifo register urfs too small."); + printk(KERN_ERR "%s: urfs is too small", __FUNCTION__); return -EINVAL; } if (uf_info->urfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { - uccf_err - ("ucc_fast_init: Virtual Fifo register urfs not aligned."); + printk(KERN_ERR "%s: urfs is not aligned", __FUNCTION__); return -EINVAL; } if (uf_info->urfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { - uccf_err - ("ucc_fast_init: Virtual Fifo register urfet not aligned."); + printk(KERN_ERR "%s: urfet is not aligned.", __FUNCTION__); return -EINVAL; } if (uf_info->urfset & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { - uccf_err - ("ucc_fast_init: Virtual Fifo register urfset not aligned."); + printk(KERN_ERR "%s: urfset is not aligned", __FUNCTION__); return -EINVAL; } if (uf_info->utfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { - uccf_err - ("ucc_fast_init: Virtual Fifo register utfs not aligned."); + printk(KERN_ERR "%s: utfs is not aligned", __FUNCTION__); return -EINVAL; } if (uf_info->utfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { - uccf_err - ("ucc_fast_init: Virtual Fifo register utfet not aligned."); + printk(KERN_ERR "%s: utfet is not aligned", __FUNCTION__); return -EINVAL; } if (uf_info->utftt & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { - uccf_err - ("ucc_fast_init: Virtual Fifo register utftt not aligned."); + printk(KERN_ERR "%s: utftt is not aligned", __FUNCTION__); return -EINVAL; } uccf = kzalloc(sizeof(struct ucc_fast_private), GFP_KERNEL); if (!uccf) { - uccf_err - ("ucc_fast_init: No memory for UCC slow data structure!"); + printk(KERN_ERR "%s: Cannot allocate private data", __FUNCTION__); return -ENOMEM; } /* Fill fast UCC structure */ uccf->uf_info = uf_info; /* Set the PHY base address */ - uccf->uf_regs = - (struct ucc_fast *) ioremap(uf_info->regs, sizeof(struct ucc_fast)); + uccf->uf_regs = ioremap(uf_info->regs, sizeof(struct ucc_fast)); if (uccf->uf_regs == NULL) { - uccf_err - ("ucc_fast_init: No memory map for UCC slow controller!"); + printk(KERN_ERR "%s: Cannot map UCC registers", __FUNCTION__); return -ENOMEM; } @@ -249,7 +218,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc /* Init Guemr register */ if ((ret = ucc_init_guemr((struct ucc_common *) (uf_regs)))) { - uccf_err("ucc_fast_init: Could not init the guemr register."); + printk(KERN_ERR "%s: cannot init GUEMR", __FUNCTION__); ucc_fast_free(uccf); return ret; } @@ -258,7 +227,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc if ((ret = ucc_set_type(uf_info->ucc_num, (struct ucc_common *) (uf_regs), UCC_SPEED_TYPE_FAST))) { - uccf_err("ucc_fast_init: Could not set type to fast."); + printk(KERN_ERR "%s: cannot set UCC type", __FUNCTION__); ucc_fast_free(uccf); return ret; } @@ -267,10 +236,9 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc /* Set GUMR */ /* For more details see the hardware spec. */ - /* gumr starts as zero. */ + gumr = uf_info->ttx_trx; if (uf_info->tci) gumr |= UCC_FAST_GUMR_TCI; - gumr |= uf_info->ttx_trx; if (uf_info->cdp) gumr |= UCC_FAST_GUMR_CDP; if (uf_info->ctsp) @@ -298,9 +266,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc uccf->ucc_fast_tx_virtual_fifo_base_offset = qe_muram_alloc(uf_info->utfs, UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT); if (IS_MURAM_ERR(uccf->ucc_fast_tx_virtual_fifo_base_offset)) { - uccf_err - ("ucc_fast_init: Can not allocate MURAM memory for " - "struct ucc_fastx_virtual_fifo_base_offset."); + printk(KERN_ERR "%s: cannot allocate MURAM for TX FIFO", __FUNCTION__); uccf->ucc_fast_tx_virtual_fifo_base_offset = 0; ucc_fast_free(uccf); return -ENOMEM; @@ -308,14 +274,11 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc /* Allocate memory for Rx Virtual Fifo */ uccf->ucc_fast_rx_virtual_fifo_base_offset = - qe_muram_alloc(uf_info->urfs + - (u32) + qe_muram_alloc(uf_info->urfs + UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR, UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT); if (IS_MURAM_ERR(uccf->ucc_fast_rx_virtual_fifo_base_offset)) { - uccf_err - ("ucc_fast_init: Can not allocate MURAM memory for " - "ucc_fast_rx_virtual_fifo_base_offset."); + printk(KERN_ERR "%s: cannot allocate MURAM for RX FIFO", __FUNCTION__); uccf->ucc_fast_rx_virtual_fifo_base_offset = 0; ucc_fast_free(uccf); return -ENOMEM; @@ -342,26 +305,22 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc /* If NMSI (not Tsa), set Tx and Rx clock. */ if (!uf_info->tsa) { /* Rx clock routing */ - if (uf_info->rx_clock != QE_CLK_NONE) { - if (ucc_set_qe_mux_rxtx - (uf_info->ucc_num, uf_info->rx_clock, - COMM_DIR_RX)) { - uccf_err - ("ucc_fast_init: Illegal value for parameter 'RxClock'."); - ucc_fast_free(uccf); - return -EINVAL; - } + if ((uf_info->rx_clock != QE_CLK_NONE) && + ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->rx_clock, + COMM_DIR_RX)) { + printk(KERN_ERR "%s: illegal value for RX clock", + __FUNCTION__); + ucc_fast_free(uccf); + return -EINVAL; } /* Tx clock routing */ - if (uf_info->tx_clock != QE_CLK_NONE) { - if (ucc_set_qe_mux_rxtx - (uf_info->ucc_num, uf_info->tx_clock, - COMM_DIR_TX)) { - uccf_err - ("ucc_fast_init: Illegal value for parameter 'TxClock'."); - ucc_fast_free(uccf); - return -EINVAL; - } + if ((uf_info->tx_clock != QE_CLK_NONE) && + ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->tx_clock, + COMM_DIR_TX)) { + printk(KERN_ERR "%s: illegal value for TX clock", + __FUNCTION__); + ucc_fast_free(uccf); + return -EINVAL; } } @@ -370,9 +329,9 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc /* First, clear anything pending at UCC level, * otherwise, old garbage may come through - * as soon as the dam is opened - * Writing '1' clears - */ + * as soon as the dam is opened. */ + + /* Writing '1' clears */ out_be32(&uf_regs->ucce, 0xffffffff); *uccf_ret = uccf; diff --git a/arch/powerpc/sysdev/qe_lib/ucc_slow.c b/arch/powerpc/sysdev/qe_lib/ucc_slow.c index 0e97e5c94f8a..817df73ecf56 100644 --- a/arch/powerpc/sysdev/qe_lib/ucc_slow.c +++ b/arch/powerpc/sysdev/qe_lib/ucc_slow.c @@ -19,7 +19,6 @@ #include #include -#include #include #include #include @@ -27,24 +26,6 @@ #include #include -#define uccs_printk(level, format, arg...) \ - printk(level format "\n", ## arg) - -#define uccs_dbg(format, arg...) \ - uccs_printk(KERN_DEBUG , format , ## arg) -#define uccs_err(format, arg...) \ - uccs_printk(KERN_ERR , format , ## arg) -#define uccs_info(format, arg...) \ - uccs_printk(KERN_INFO , format , ## arg) -#define uccs_warn(format, arg...) \ - uccs_printk(KERN_WARNING , format , ## arg) - -#ifdef UCCS_VERBOSE_DEBUG -#define uccs_vdbg uccs_dbg -#else -#define uccs_vdbg(fmt, args...) do { } while (0) -#endif /* UCCS_VERBOSE_DEBUG */ - u32 ucc_slow_get_qe_cr_subblock(int uccs_num) { switch (uccs_num) { @@ -135,51 +116,53 @@ void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode) int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret) { + struct ucc_slow_private *uccs; u32 i; struct ucc_slow *us_regs; u32 gumr; - u8 function_code = 0; - u8 *bd; - struct ucc_slow_private *uccs; + struct qe_bd *bd; u32 id; u32 command; - int ret; - - uccs_vdbg("%s: IN", __FUNCTION__); + int ret = 0; if (!us_info) return -EINVAL; /* check if the UCC port number is in range. */ if ((us_info->ucc_num < 0) || (us_info->ucc_num > UCC_MAX_NUM - 1)) { - uccs_err("ucc_slow_init: Illegal UCC number!"); + printk(KERN_ERR "%s: illegal UCC number", __FUNCTION__); return -EINVAL; } /* * Set mrblr * Check that 'max_rx_buf_length' is properly aligned (4), unless - * rfw is 1, meaning that QE accepts one byte at a time, unlike normal + * rfw is 1, meaning that QE accepts one byte at a time, unlike normal * case when QE accepts 32 bits at a time. */ if ((!us_info->rfw) && (us_info->max_rx_buf_length & (UCC_SLOW_MRBLR_ALIGNMENT - 1))) { - uccs_err("max_rx_buf_length not aligned."); + printk(KERN_ERR "max_rx_buf_length not aligned."); return -EINVAL; } uccs = kzalloc(sizeof(struct ucc_slow_private), GFP_KERNEL); if (!uccs) { - uccs_err - ("ucc_slow_init: No memory for UCC slow data structure!"); + printk(KERN_ERR "%s: Cannot allocate private data", __FUNCTION__); return -ENOMEM; } /* Fill slow UCC structure */ uccs->us_info = us_info; + /* Set the PHY base address */ + uccs->us_regs = ioremap(us_info->regs, sizeof(struct ucc_slow)); + if (uccs->us_regs == NULL) { + printk(KERN_ERR "%s: Cannot map UCC registers", __FUNCTION__); + return -ENOMEM; + } + uccs->saved_uccm = 0; uccs->p_rx_frame = 0; - uccs->us_regs = us_info->regs; us_regs = uccs->us_regs; uccs->p_ucce = (u16 *) & (us_regs->ucce); uccs->p_uccm = (u16 *) & (us_regs->uccm); @@ -190,24 +173,22 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc #endif /* STATISTICS */ /* Get PRAM base */ - uccs->us_pram_offset = qe_muram_alloc(UCC_SLOW_PRAM_SIZE, - ALIGNMENT_OF_UCC_SLOW_PRAM); + uccs->us_pram_offset = + qe_muram_alloc(UCC_SLOW_PRAM_SIZE, ALIGNMENT_OF_UCC_SLOW_PRAM); if (IS_MURAM_ERR(uccs->us_pram_offset)) { - uccs_err - ("ucc_slow_init: Can not allocate MURAM memory " - "for Slow UCC."); + printk(KERN_ERR "%s: cannot allocate MURAM for PRAM", __FUNCTION__); ucc_slow_free(uccs); return -ENOMEM; } id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num); qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, id, QE_CR_PROTOCOL_UNSPECIFIED, - (u32) uccs->us_pram_offset); + uccs->us_pram_offset); uccs->us_pram = qe_muram_addr(uccs->us_pram_offset); /* Init Guemr register */ if ((ret = ucc_init_guemr((struct ucc_common *) (us_info->regs)))) { - uccs_err("ucc_slow_init: Could not init the guemr register."); + printk(KERN_ERR "%s: cannot init GUEMR", __FUNCTION__); ucc_slow_free(uccs); return ret; } @@ -216,7 +197,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc if ((ret = ucc_set_type(us_info->ucc_num, (struct ucc_common *) (us_info->regs), UCC_SPEED_TYPE_SLOW))) { - uccs_err("ucc_slow_init: Could not init the guemr register."); + printk(KERN_ERR "%s: cannot set UCC type", __FUNCTION__); ucc_slow_free(uccs); return ret; } @@ -230,7 +211,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc qe_muram_alloc(us_info->rx_bd_ring_len * sizeof(struct qe_bd), QE_ALIGNMENT_OF_BD); if (IS_MURAM_ERR(uccs->rx_base_offset)) { - uccs_err("ucc_slow_init: No memory for Rx BD's."); + printk(KERN_ERR "%s: cannot allocate RX BDs", __FUNCTION__); uccs->rx_base_offset = 0; ucc_slow_free(uccs); return -ENOMEM; @@ -240,7 +221,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc qe_muram_alloc(us_info->tx_bd_ring_len * sizeof(struct qe_bd), QE_ALIGNMENT_OF_BD); if (IS_MURAM_ERR(uccs->tx_base_offset)) { - uccs_err("ucc_slow_init: No memory for Tx BD's."); + printk(KERN_ERR "%s: cannot allocate TX BDs", __FUNCTION__); uccs->tx_base_offset = 0; ucc_slow_free(uccs); return -ENOMEM; @@ -248,34 +229,33 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc /* Init Tx bds */ bd = uccs->confBd = uccs->tx_bd = qe_muram_addr(uccs->tx_base_offset); - for (i = 0; i < us_info->tx_bd_ring_len; i++) { + for (i = 0; i < us_info->tx_bd_ring_len - 1; i++) { /* clear bd buffer */ - out_be32(&(((struct qe_bd *)bd)->buf), 0); + out_be32(&bd->buf, 0); /* set bd status and length */ - out_be32((u32*)bd, 0); - bd += sizeof(struct qe_bd); + out_be32((u32 *) bd, 0); + bd++; } - bd -= sizeof(struct qe_bd); - /* set bd status and length */ - out_be32((u32*)bd, T_W); /* for last BD set Wrap bit */ + /* for last BD set Wrap bit */ + out_be32(&bd->buf, 0); + out_be32((u32 *) bd, cpu_to_be32(T_W)); /* Init Rx bds */ bd = uccs->rx_bd = qe_muram_addr(uccs->rx_base_offset); - for (i = 0; i < us_info->rx_bd_ring_len; i++) { + for (i = 0; i < us_info->rx_bd_ring_len - 1; i++) { /* set bd status and length */ out_be32((u32*)bd, 0); /* clear bd buffer */ - out_be32(&(((struct qe_bd *)bd)->buf), 0); - bd += sizeof(struct qe_bd); + out_be32(&bd->buf, 0); + bd++; } - bd -= sizeof(struct qe_bd); - /* set bd status and length */ - out_be32((u32*)bd, R_W); /* for last BD set Wrap bit */ + /* for last BD set Wrap bit */ + out_be32((u32*)bd, cpu_to_be32(R_W)); + out_be32(&bd->buf, 0); /* Set GUMR (For more details see the hardware spec.). */ /* gumr_h */ - gumr = 0; - gumr |= us_info->tcrc; + gumr = us_info->tcrc; if (us_info->cdp) gumr |= UCC_SLOW_GUMR_H_CDP; if (us_info->ctsp) @@ -295,7 +275,8 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc out_be32(&us_regs->gumr_h, gumr); /* gumr_l */ - gumr = 0; + gumr = us_info->tdcr | us_info->rdcr | us_info->tenc | us_info->renc | + us_info->diag | us_info->mode; if (us_info->tci) gumr |= UCC_SLOW_GUMR_L_TCI; if (us_info->rinv) @@ -304,23 +285,14 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc gumr |= UCC_SLOW_GUMR_L_TINV; if (us_info->tend) gumr |= UCC_SLOW_GUMR_L_TEND; - gumr |= us_info->tdcr; - gumr |= us_info->rdcr; - gumr |= us_info->tenc; - gumr |= us_info->renc; - gumr |= us_info->diag; - gumr |= us_info->mode; out_be32(&us_regs->gumr_l, gumr); /* Function code registers */ - /* function_code has initial value 0 */ /* if the data is in cachable memory, the 'global' */ /* in the function code should be set. */ - function_code |= us_info->data_mem_part; - function_code |= QE_BMR_BYTE_ORDER_BO_MOT; /* Required for QE */ - uccs->us_pram->tfcr = function_code; - uccs->us_pram->rfcr = function_code; + uccs->us_pram->tfcr = uccs->us_pram->rfcr = + us_info->data_mem_part | QE_BMR_BYTE_ORDER_BO_MOT; /* rbase, tbase are offsets from MURAM base */ out_be16(&uccs->us_pram->rbase, uccs->us_pram_offset); @@ -336,34 +308,29 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc /* If NMSI (not Tsa), set Tx and Rx clock. */ if (!us_info->tsa) { /* Rx clock routing */ - if (ucc_set_qe_mux_rxtx - (us_info->ucc_num, us_info->rx_clock, COMM_DIR_RX)) { - uccs_err - ("ucc_slow_init: Illegal value for parameter" - " 'RxClock'."); + if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->rx_clock, + COMM_DIR_RX)) { + printk(KERN_ERR "%s: illegal value for RX clock", + __FUNCTION__); ucc_slow_free(uccs); return -EINVAL; } /* Tx clock routing */ - if (ucc_set_qe_mux_rxtx(us_info->ucc_num, - us_info->tx_clock, COMM_DIR_TX)) { - uccs_err - ("ucc_slow_init: Illegal value for parameter " - "'TxClock'."); + if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->tx_clock, + COMM_DIR_TX)) { + printk(KERN_ERR "%s: illegal value for TX clock", + __FUNCTION__); ucc_slow_free(uccs); return -EINVAL; } } - /* - * INTERRUPTS - */ /* Set interrupt mask register at UCC level. */ out_be16(&us_regs->uccm, us_info->uccm_mask); - /* First, clear anything pending at UCC level, */ - /* otherwise, old garbage may come through */ - /* as soon as the dam is opened. */ + /* First, clear anything pending at UCC level, + * otherwise, old garbage may come through + * as soon as the dam is opened. */ /* Writing '1' clears */ out_be16(&us_regs->ucce, 0xffff); @@ -400,3 +367,5 @@ void ucc_slow_free(struct ucc_slow_private * uccs) kfree(uccs); } + + -- cgit v1.2.3 From 6936c62571d8dc580725775b628ee73d2ac97b6f Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Sat, 17 Feb 2007 16:19:34 -0600 Subject: [POWERPC] 85xx: Cleaning up machine probing Cleaned up the probing functionality to be more consistent across all 85xx boards and actually check to see if we should be running on a given board. Signed-off-by: Kumar Gala --- arch/powerpc/platforms/85xx/mpc8568_mds.c | 17 +++-------------- arch/powerpc/platforms/85xx/mpc85xx_ads.c | 7 +++---- arch/powerpc/platforms/85xx/mpc85xx_cds.c | 8 +++----- 3 files changed, 9 insertions(+), 23 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/85xx/mpc8568_mds.c b/arch/powerpc/platforms/85xx/mpc8568_mds.c index 324138a206a4..0ba22a42f8df 100644 --- a/arch/powerpc/platforms/85xx/mpc8568_mds.c +++ b/arch/powerpc/platforms/85xx/mpc8568_mds.c @@ -74,7 +74,6 @@ static void __init mpc8568_mds_setup_arch(void) struct device_node *np; static u8 *bcsr_regs = NULL; - if (ppc_md.progress) ppc_md.progress("mpc8568_mds_setup_arch()", 0); @@ -206,7 +205,6 @@ static void __init mpc8568_mds_pic_init(void) mpic_init(mpic); - #ifdef CONFIG_QUICC_ENGINE np = of_find_node_by_type(NULL, "qeic"); if (!np) @@ -217,24 +215,15 @@ static void __init mpc8568_mds_pic_init(void) #endif /* CONFIG_QUICC_ENGINE */ } - static int __init mpc8568_mds_probe(void) { - char *model = of_get_flat_dt_prop(of_get_flat_dt_root(), - "model", NULL); - if (model == NULL) - return 0; - if (strcmp(model, "MPC8568EMDS")) - return 0; - - DBG("MPC8568EMDS found\n"); + unsigned long root = of_get_flat_dt_root(); - return 1; + return of_flat_dt_is_compatible(root, "MPC85xxMDS"); } - define_machine(mpc8568_mds) { - .name = "MPC8568E MDS", + .name = "MPC85xx MDS", .probe = mpc8568_mds_probe, .setup_arch = mpc8568_mds_setup_arch, .init_IRQ = mpc8568_mds_pic_init, diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c index 741bcea8f991..8ed034aeca5f 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c @@ -272,10 +272,9 @@ static void mpc85xx_ads_show_cpuinfo(struct seq_file *m) */ static int __init mpc85xx_ads_probe(void) { - /* We always match for now, eventually we should look at the flat - dev tree to ensure this is the board we are suppose to run on - */ - return 1; + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "MPC85xxADS"); } define_machine(mpc85xx_ads) { diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c index bf6c60455a89..4232686be441 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c @@ -291,11 +291,9 @@ static void mpc85xx_cds_show_cpuinfo(struct seq_file *m) */ static int __init mpc85xx_cds_probe(void) { - /* We always match for now, eventually we should look at - * the flat dev tree to ensure this is the board we are - * supposed to run on - */ - return 1; + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "MPC85xxCDS"); } define_machine(mpc85xx_cds) { -- cgit v1.2.3 From 23f510bcd3a886a8a0b04ad0528006f5c309fcb8 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Sat, 17 Feb 2007 16:29:36 -0600 Subject: [POWERPC] 85xx: Renamed MPC8568 MDS board code to match other boards Renamed the MPC8568 MDS platform code to follow other 85xx boards. There isn't anything specific about the 8568 MDS code that wouldn't apply to another 85xx MDS system at this point. Signed-off-by: Kumar Gala --- arch/powerpc/configs/mpc8568mds_defconfig | 32 +++- arch/powerpc/platforms/85xx/Kconfig | 8 +- arch/powerpc/platforms/85xx/Makefile | 2 +- arch/powerpc/platforms/85xx/mpc8568_mds.c | 234 ------------------------------ arch/powerpc/platforms/85xx/mpc85xx_mds.c | 234 ++++++++++++++++++++++++++++++ 5 files changed, 264 insertions(+), 246 deletions(-) delete mode 100644 arch/powerpc/platforms/85xx/mpc8568_mds.c create mode 100644 arch/powerpc/platforms/85xx/mpc85xx_mds.c (limited to 'arch') diff --git a/arch/powerpc/configs/mpc8568mds_defconfig b/arch/powerpc/configs/mpc8568mds_defconfig index 058e06d88bc1..7b3800674cbf 100644 --- a/arch/powerpc/configs/mpc8568mds_defconfig +++ b/arch/powerpc/configs/mpc8568mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20-rc5 -# Wed Feb 7 23:54:25 2007 +# Linux kernel version: 2.6.20 +# Sat Feb 17 16:26:53 2007 # # CONFIG_PPC64 is not set CONFIG_PPC32=y @@ -34,9 +34,9 @@ CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_83xx is not set CONFIG_PPC_85xx=y # CONFIG_PPC_86xx is not set +# CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set -# CONFIG_8xx is not set # CONFIG_E200 is not set CONFIG_85xx=y CONFIG_E500=y @@ -63,6 +63,7 @@ CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set @@ -130,7 +131,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_MPC8540_ADS is not set # CONFIG_MPC8560_ADS is not set # CONFIG_MPC85xx_CDS is not set -CONFIG_MPC8568_MDS=y +CONFIG_MPC85xx_MDS=y CONFIG_MPC85xx=y CONFIG_PPC_INDIRECT_PCI_BE=y CONFIG_MPIC=y @@ -162,6 +163,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -171,6 +173,7 @@ CONFIG_ISA_DMA_API=y # # Bus options # +CONFIG_ZONE_DMA=y # CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set CONFIG_PPC_INDIRECT_PCI=y @@ -216,6 +219,7 @@ CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -301,6 +305,7 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # @@ -341,7 +346,6 @@ CONFIG_BLK_DEV_INITRD=y # # Misc devices # -# CONFIG_TIFM_CORE is not set # # ATA/ATAPI/MFM/RLL support @@ -543,6 +547,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -698,6 +703,7 @@ CONFIG_FIRMWARE_EDID=y # HID Devices # CONFIG_HID=y +# CONFIG_HID_DEBUG is not set # # USB support @@ -759,6 +765,10 @@ CONFIG_HID=y # DMA Devices # +# +# Auxiliary Display support +# + # # Virtualization # @@ -896,7 +906,8 @@ CONFIG_BITREVERSE=y CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_PLIST=y -CONFIG_IOMAP_COPY=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y # # Instrumentation Support @@ -914,6 +925,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set @@ -922,7 +934,6 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_RWSEMS is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -932,6 +943,8 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_DEBUG_LIST is not set CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUGGER=y # CONFIG_XMON is not set # CONFIG_BDI_SWITCH is not set @@ -943,6 +956,8 @@ CONFIG_PPC_EARLY_DEBUG=y # CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set # CONFIG_PPC_EARLY_DEBUG_MAPLE is not set # CONFIG_PPC_EARLY_DEBUG_ISERIES is not set +# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set +# CONFIG_PPC_EARLY_DEBUG_BEAT is not set # # Security options @@ -970,8 +985,10 @@ CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_GF128MUL is not set CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_SERPENT is not set @@ -985,6 +1002,7 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set # diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index 0efdd2f1babe..eb661ccf2dab 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -23,12 +23,12 @@ config MPC85xx_CDS help This option enables support for the MPC85xx CDS board -config MPC8568_MDS - bool "Freescale MPC8568 MDS" +config MPC85xx_MDS + bool "Freescale MPC85xx MDS" select DEFAULT_UIMAGE # select QUICC_ENGINE help - This option enables support for the MPC8568 MDS board + This option enables support for the MPC85xx MDS board endchoice @@ -47,7 +47,7 @@ config MPC85xx bool select PPC_UDBG_16550 select PPC_INDIRECT_PCI - default y if MPC8540_ADS || MPC85xx_CDS || MPC8560_ADS || MPC8568_MDS + default y if MPC8540_ADS || MPC85xx_CDS || MPC8560_ADS || MPC85xx_MDS config PPC_INDIRECT_PCI_BE bool diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile index e40e521816b8..4e63917ada9d 100644 --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -5,4 +5,4 @@ obj-$(CONFIG_PPC_85xx) += misc.o pci.o obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o -obj-$(CONFIG_MPC8568_MDS) += mpc8568_mds.o +obj-$(CONFIG_MPC85xx_MDS) += mpc85xx_mds.o diff --git a/arch/powerpc/platforms/85xx/mpc8568_mds.c b/arch/powerpc/platforms/85xx/mpc8568_mds.c deleted file mode 100644 index 0ba22a42f8df..000000000000 --- a/arch/powerpc/platforms/85xx/mpc8568_mds.c +++ /dev/null @@ -1,234 +0,0 @@ -/* - * Copyright (C) Freescale Semicondutor, Inc. 2006-2007. All rights reserved. - * - * Author: Andy Fleming - * - * Based on 83xx/mpc8360e_pb.c by: - * Li Yang - * Yin Olivia - * - * Description: - * MPC8568E MDS PB board specific routines. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "mpc85xx.h" - -#undef DEBUG -#ifdef DEBUG -#define DBG(fmt...) udbg_printf(fmt) -#else -#define DBG(fmt...) -#endif - -#ifndef CONFIG_PCI -unsigned long isa_io_base = 0; -unsigned long isa_mem_base = 0; -#endif - -/* ************************************************************************ - * - * Setup the architecture - * - */ -static void __init mpc8568_mds_setup_arch(void) -{ - struct device_node *np; - static u8 *bcsr_regs = NULL; - - if (ppc_md.progress) - ppc_md.progress("mpc8568_mds_setup_arch()", 0); - - np = of_find_node_by_type(NULL, "cpu"); - if (np != NULL) { - const unsigned int *fp = - get_property(np, "clock-frequency", NULL); - if (fp != NULL) - loops_per_jiffy = *fp / HZ; - else - loops_per_jiffy = 50000000 / HZ; - of_node_put(np); - } - - /* Map BCSR area */ - np = of_find_node_by_name(NULL, "bcsr"); - if (np != NULL) { - struct resource res; - - of_address_to_resource(np, 0, &res); - bcsr_regs = ioremap(res.start, res.end - res.start +1); - of_node_put(np); - } - -#ifdef CONFIG_PCI - for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) { - add_bridge(np); - } - of_node_put(np); -#endif - -#ifdef CONFIG_QUICC_ENGINE - if ((np = of_find_node_by_name(NULL, "qe")) != NULL) { - qe_reset(); - of_node_put(np); - } - - if ((np = of_find_node_by_name(NULL, "par_io")) != NULL) { - struct device_node *ucc = NULL; - - par_io_init(np); - of_node_put(np); - - for ( ;(ucc = of_find_node_by_name(ucc, "ucc")) != NULL;) - par_io_of_config(ucc); - - of_node_put(ucc); - } - - if (bcsr_regs) { - u8 bcsr_phy; - - /* Reset the Ethernet PHY */ - bcsr_phy = in_be8(&bcsr_regs[9]); - bcsr_phy &= ~0x20; - out_be8(&bcsr_regs[9], bcsr_phy); - - udelay(1000); - - bcsr_phy = in_be8(&bcsr_regs[9]); - bcsr_phy |= 0x20; - out_be8(&bcsr_regs[9], bcsr_phy); - - iounmap(bcsr_regs); - } - -#endif /* CONFIG_QUICC_ENGINE */ -} - -static struct of_device_id mpc8568_ids[] = { - { .type = "soc", }, - { .compatible = "soc", }, - { .type = "qe", }, - {}, -}; - -static int __init mpc8568_publish_devices(void) -{ - if (!machine_is(mpc8568_mds)) - return 0; - - /* Publish the QE devices */ - of_platform_bus_probe(NULL,mpc8568_ids,NULL); - - return 0; -} -device_initcall(mpc8568_publish_devices); - -static void __init mpc8568_mds_pic_init(void) -{ - struct mpic *mpic; - struct resource r; - struct device_node *np = NULL; - - np = of_find_node_by_type(NULL, "open-pic"); - if (!np) - return; - - if (of_address_to_resource(np, 0, &r)) { - printk(KERN_ERR "Failed to map mpic register space\n"); - of_node_put(np); - return; - } - - mpic = mpic_alloc(np, r.start, - MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, - 4, 0, " OpenPIC "); - BUG_ON(mpic == NULL); - of_node_put(np); - - /* Internal Interrupts */ - mpic_assign_isu(mpic, 0, r.start + 0x10200); - mpic_assign_isu(mpic, 1, r.start + 0x10280); - mpic_assign_isu(mpic, 2, r.start + 0x10300); - mpic_assign_isu(mpic, 3, r.start + 0x10380); - mpic_assign_isu(mpic, 4, r.start + 0x10400); - mpic_assign_isu(mpic, 5, r.start + 0x10480); - mpic_assign_isu(mpic, 6, r.start + 0x10500); - mpic_assign_isu(mpic, 7, r.start + 0x10580); - mpic_assign_isu(mpic, 8, r.start + 0x10600); - mpic_assign_isu(mpic, 9, r.start + 0x10680); - mpic_assign_isu(mpic, 10, r.start + 0x10700); - mpic_assign_isu(mpic, 11, r.start + 0x10780); - - /* External Interrupts */ - mpic_assign_isu(mpic, 12, r.start + 0x10000); - mpic_assign_isu(mpic, 13, r.start + 0x10080); - mpic_assign_isu(mpic, 14, r.start + 0x10100); - - mpic_init(mpic); - -#ifdef CONFIG_QUICC_ENGINE - np = of_find_node_by_type(NULL, "qeic"); - if (!np) - return; - - qe_ic_init(np, 0); - of_node_put(np); -#endif /* CONFIG_QUICC_ENGINE */ -} - -static int __init mpc8568_mds_probe(void) -{ - unsigned long root = of_get_flat_dt_root(); - - return of_flat_dt_is_compatible(root, "MPC85xxMDS"); -} - -define_machine(mpc8568_mds) { - .name = "MPC85xx MDS", - .probe = mpc8568_mds_probe, - .setup_arch = mpc8568_mds_setup_arch, - .init_IRQ = mpc8568_mds_pic_init, - .get_irq = mpic_get_irq, - .restart = mpc85xx_restart, - .calibrate_decr = generic_calibrate_decr, - .progress = udbg_progress, -}; diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c new file mode 100644 index 000000000000..81144d2ae455 --- /dev/null +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c @@ -0,0 +1,234 @@ +/* + * Copyright (C) Freescale Semicondutor, Inc. 2006-2007. All rights reserved. + * + * Author: Andy Fleming + * + * Based on 83xx/mpc8360e_pb.c by: + * Li Yang + * Yin Olivia + * + * Description: + * MPC85xx MDS board specific routines. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "mpc85xx.h" + +#undef DEBUG +#ifdef DEBUG +#define DBG(fmt...) udbg_printf(fmt) +#else +#define DBG(fmt...) +#endif + +#ifndef CONFIG_PCI +unsigned long isa_io_base = 0; +unsigned long isa_mem_base = 0; +#endif + +/* ************************************************************************ + * + * Setup the architecture + * + */ +static void __init mpc85xx_mds_setup_arch(void) +{ + struct device_node *np; + static u8 *bcsr_regs = NULL; + + if (ppc_md.progress) + ppc_md.progress("mpc85xx_mds_setup_arch()", 0); + + np = of_find_node_by_type(NULL, "cpu"); + if (np != NULL) { + const unsigned int *fp = + get_property(np, "clock-frequency", NULL); + if (fp != NULL) + loops_per_jiffy = *fp / HZ; + else + loops_per_jiffy = 50000000 / HZ; + of_node_put(np); + } + + /* Map BCSR area */ + np = of_find_node_by_name(NULL, "bcsr"); + if (np != NULL) { + struct resource res; + + of_address_to_resource(np, 0, &res); + bcsr_regs = ioremap(res.start, res.end - res.start +1); + of_node_put(np); + } + +#ifdef CONFIG_PCI + for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) { + add_bridge(np); + } + of_node_put(np); +#endif + +#ifdef CONFIG_QUICC_ENGINE + if ((np = of_find_node_by_name(NULL, "qe")) != NULL) { + qe_reset(); + of_node_put(np); + } + + if ((np = of_find_node_by_name(NULL, "par_io")) != NULL) { + struct device_node *ucc = NULL; + + par_io_init(np); + of_node_put(np); + + for ( ;(ucc = of_find_node_by_name(ucc, "ucc")) != NULL;) + par_io_of_config(ucc); + + of_node_put(ucc); + } + + if (bcsr_regs) { + u8 bcsr_phy; + + /* Reset the Ethernet PHY */ + bcsr_phy = in_be8(&bcsr_regs[9]); + bcsr_phy &= ~0x20; + out_be8(&bcsr_regs[9], bcsr_phy); + + udelay(1000); + + bcsr_phy = in_be8(&bcsr_regs[9]); + bcsr_phy |= 0x20; + out_be8(&bcsr_regs[9], bcsr_phy); + + iounmap(bcsr_regs); + } + +#endif /* CONFIG_QUICC_ENGINE */ +} + +static struct of_device_id mpc85xx_ids[] = { + { .type = "soc", }, + { .compatible = "soc", }, + { .type = "qe", }, + {}, +}; + +static int __init mpc85xx_publish_devices(void) +{ + if (!machine_is(mpc85xx_mds)) + return 0; + + /* Publish the QE devices */ + of_platform_bus_probe(NULL,mpc85xx_ids,NULL); + + return 0; +} +device_initcall(mpc85xx_publish_devices); + +static void __init mpc85xx_mds_pic_init(void) +{ + struct mpic *mpic; + struct resource r; + struct device_node *np = NULL; + + np = of_find_node_by_type(NULL, "open-pic"); + if (!np) + return; + + if (of_address_to_resource(np, 0, &r)) { + printk(KERN_ERR "Failed to map mpic register space\n"); + of_node_put(np); + return; + } + + mpic = mpic_alloc(np, r.start, + MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, + 4, 0, " OpenPIC "); + BUG_ON(mpic == NULL); + of_node_put(np); + + /* Internal Interrupts */ + mpic_assign_isu(mpic, 0, r.start + 0x10200); + mpic_assign_isu(mpic, 1, r.start + 0x10280); + mpic_assign_isu(mpic, 2, r.start + 0x10300); + mpic_assign_isu(mpic, 3, r.start + 0x10380); + mpic_assign_isu(mpic, 4, r.start + 0x10400); + mpic_assign_isu(mpic, 5, r.start + 0x10480); + mpic_assign_isu(mpic, 6, r.start + 0x10500); + mpic_assign_isu(mpic, 7, r.start + 0x10580); + mpic_assign_isu(mpic, 8, r.start + 0x10600); + mpic_assign_isu(mpic, 9, r.start + 0x10680); + mpic_assign_isu(mpic, 10, r.start + 0x10700); + mpic_assign_isu(mpic, 11, r.start + 0x10780); + + /* External Interrupts */ + mpic_assign_isu(mpic, 12, r.start + 0x10000); + mpic_assign_isu(mpic, 13, r.start + 0x10080); + mpic_assign_isu(mpic, 14, r.start + 0x10100); + + mpic_init(mpic); + +#ifdef CONFIG_QUICC_ENGINE + np = of_find_node_by_type(NULL, "qeic"); + if (!np) + return; + + qe_ic_init(np, 0); + of_node_put(np); +#endif /* CONFIG_QUICC_ENGINE */ +} + +static int __init mpc85xx_mds_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "MPC85xxMDS"); +} + +define_machine(mpc85xx_mds) { + .name = "MPC85xx MDS", + .probe = mpc85xx_mds_probe, + .setup_arch = mpc85xx_mds_setup_arch, + .init_IRQ = mpc85xx_mds_pic_init, + .get_irq = mpic_get_irq, + .restart = mpc85xx_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; -- cgit v1.2.3 From 6d9065d8af2c86464b1f16e8aad80b3aa91756d2 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Sat, 17 Feb 2007 16:09:56 -0600 Subject: [POWERPC] 86xx: Cleaned up platform dts files * Removed explicit linux,phandle usage. Use references and labels now * Removed interrupts property from openpic node * Removed interrupt-parent property from openpic node that pointed to itself Signed-off-by: Kumar Gala Acked-by: Jon Loeliger --- arch/powerpc/boot/dts/mpc8641_hpcn.dts | 193 +++++++++++++++------------------ 1 file changed, 85 insertions(+), 108 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts index 8c75e4e1258f..8a4995a85ba0 100644 --- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts +++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts @@ -66,7 +66,7 @@ compatible = "fsl-i2c"; reg = <3000 100>; interrupts = <2b 2>; - interrupt-parent = <40000>; + interrupt-parent = <&mpic>; dfsrr; }; @@ -75,7 +75,7 @@ compatible = "fsl-i2c"; reg = <3100 100>; interrupts = <2b 2>; - interrupt-parent = <40000>; + interrupt-parent = <&mpic>; dfsrr; }; @@ -85,31 +85,26 @@ device_type = "mdio"; compatible = "gianfar"; reg = <24520 20>; - linux,phandle = <24520>; - ethernet-phy@0 { - linux,phandle = <2452000>; - interrupt-parent = <40000>; + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; interrupts = <4a 1>; reg = <0>; device_type = "ethernet-phy"; }; - ethernet-phy@1 { - linux,phandle = <2452001>; - interrupt-parent = <40000>; + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; interrupts = <4a 1>; reg = <1>; device_type = "ethernet-phy"; }; - ethernet-phy@2 { - linux,phandle = <2452002>; - interrupt-parent = <40000>; + phy2: ethernet-phy@2 { + interrupt-parent = <&mpic>; interrupts = <4a 1>; reg = <2>; device_type = "ethernet-phy"; }; - ethernet-phy@3 { - linux,phandle = <2452003>; - interrupt-parent = <40000>; + phy3: ethernet-phy@3 { + interrupt-parent = <&mpic>; interrupts = <4a 1>; reg = <3>; device_type = "ethernet-phy"; @@ -125,8 +120,8 @@ reg = <24000 1000>; mac-address = [ 00 E0 0C 00 73 00 ]; interrupts = <1d 2 1e 2 22 2>; - interrupt-parent = <40000>; - phy-handle = <2452000>; + interrupt-parent = <&mpic>; + phy-handle = <&phy0>; }; ethernet@25000 { @@ -138,8 +133,8 @@ reg = <25000 1000>; mac-address = [ 00 E0 0C 00 73 01 ]; interrupts = <23 2 24 2 28 2>; - interrupt-parent = <40000>; - phy-handle = <2452001>; + interrupt-parent = <&mpic>; + phy-handle = <&phy1>; }; ethernet@26000 { @@ -151,8 +146,8 @@ reg = <26000 1000>; mac-address = [ 00 E0 0C 00 02 FD ]; interrupts = <1F 2 20 2 21 2>; - interrupt-parent = <40000>; - phy-handle = <2452002>; + interrupt-parent = <&mpic>; + phy-handle = <&phy2>; }; ethernet@27000 { @@ -164,8 +159,8 @@ reg = <27000 1000>; mac-address = [ 00 E0 0C 00 03 FD ]; interrupts = <25 2 26 2 27 2>; - interrupt-parent = <40000>; - phy-handle = <2452003>; + interrupt-parent = <&mpic>; + phy-handle = <&phy3>; }; serial@4500 { device_type = "serial"; @@ -173,7 +168,7 @@ reg = <4500 100>; clock-frequency = <0>; interrupts = <2a 2>; - interrupt-parent = <40000>; + interrupt-parent = <&mpic>; }; serial@4600 { @@ -182,7 +177,7 @@ reg = <4600 100>; clock-frequency = <0>; interrupts = <1c 2>; - interrupt-parent = <40000>; + interrupt-parent = <&mpic>; }; pci@8000 { @@ -196,103 +191,102 @@ ranges = <02000000 0 80000000 80000000 0 20000000 01000000 0 00000000 e2000000 0 00100000>; clock-frequency = <1fca055>; - interrupt-parent = <40000>; + interrupt-parent = <&mpic>; interrupts = <18 2>; interrupt-map-mask = ; interrupt-map = < /* IDSEL 0x11 */ - 8800 0 0 1 4d0 3 2 - 8800 0 0 2 4d0 4 2 - 8800 0 0 3 4d0 5 2 - 8800 0 0 4 4d0 6 2 + 8800 0 0 1 &i8259 3 2 + 8800 0 0 2 &i8259 4 2 + 8800 0 0 3 &i8259 5 2 + 8800 0 0 4 &i8259 6 2 /* IDSEL 0x12 */ - 9000 0 0 1 4d0 4 2 - 9000 0 0 2 4d0 5 2 - 9000 0 0 3 4d0 6 2 - 9000 0 0 4 4d0 3 2 + 9000 0 0 1 &i8259 4 2 + 9000 0 0 2 &i8259 5 2 + 9000 0 0 3 &i8259 6 2 + 9000 0 0 4 &i8259 3 2 /* IDSEL 0x13 */ - 9800 0 0 1 4d0 0 0 - 9800 0 0 2 4d0 0 0 - 9800 0 0 3 4d0 0 0 - 9800 0 0 4 4d0 0 0 + 9800 0 0 1 &i8259 0 0 + 9800 0 0 2 &i8259 0 0 + 9800 0 0 3 &i8259 0 0 + 9800 0 0 4 &i8259 0 0 /* IDSEL 0x14 */ - a000 0 0 1 4d0 0 0 - a000 0 0 2 4d0 0 0 - a000 0 0 3 4d0 0 0 - a000 0 0 4 4d0 0 0 + a000 0 0 1 &i8259 0 0 + a000 0 0 2 &i8259 0 0 + a000 0 0 3 &i8259 0 0 + a000 0 0 4 &i8259 0 0 /* IDSEL 0x15 */ - a800 0 0 1 4d0 0 0 - a800 0 0 2 4d0 0 0 - a800 0 0 3 4d0 0 0 - a800 0 0 4 4d0 0 0 + a800 0 0 1 &i8259 0 0 + a800 0 0 2 &i8259 0 0 + a800 0 0 3 &i8259 0 0 + a800 0 0 4 &i8259 0 0 /* IDSEL 0x16 */ - b000 0 0 1 4d0 0 0 - b000 0 0 2 4d0 0 0 - b000 0 0 3 4d0 0 0 - b000 0 0 4 4d0 0 0 + b000 0 0 1 &i8259 0 0 + b000 0 0 2 &i8259 0 0 + b000 0 0 3 &i8259 0 0 + b000 0 0 4 &i8259 0 0 /* IDSEL 0x17 */ - b800 0 0 1 4d0 0 0 - b800 0 0 2 4d0 0 0 - b800 0 0 3 4d0 0 0 - b800 0 0 4 4d0 0 0 + b800 0 0 1 &i8259 0 0 + b800 0 0 2 &i8259 0 0 + b800 0 0 3 &i8259 0 0 + b800 0 0 4 &i8259 0 0 /* IDSEL 0x18 */ - c000 0 0 1 4d0 0 0 - c000 0 0 2 4d0 0 0 - c000 0 0 3 4d0 0 0 - c000 0 0 4 4d0 0 0 + c000 0 0 1 &i8259 0 0 + c000 0 0 2 &i8259 0 0 + c000 0 0 3 &i8259 0 0 + c000 0 0 4 &i8259 0 0 /* IDSEL 0x19 */ - c800 0 0 1 4d0 0 0 - c800 0 0 2 4d0 0 0 - c800 0 0 3 4d0 0 0 - c800 0 0 4 4d0 0 0 + c800 0 0 1 &i8259 0 0 + c800 0 0 2 &i8259 0 0 + c800 0 0 3 &i8259 0 0 + c800 0 0 4 &i8259 0 0 /* IDSEL 0x1a */ - d000 0 0 1 4d0 6 2 - d000 0 0 2 4d0 3 2 - d000 0 0 3 4d0 4 2 - d000 0 0 4 4d0 5 2 + d000 0 0 1 &i8259 6 2 + d000 0 0 2 &i8259 3 2 + d000 0 0 3 &i8259 4 2 + d000 0 0 4 &i8259 5 2 /* IDSEL 0x1b */ - d800 0 0 1 4d0 5 2 - d800 0 0 2 4d0 0 0 - d800 0 0 3 4d0 0 0 - d800 0 0 4 4d0 0 0 + d800 0 0 1 &i8259 5 2 + d800 0 0 2 &i8259 0 0 + d800 0 0 3 &i8259 0 0 + d800 0 0 4 &i8259 0 0 /* IDSEL 0x1c */ - e000 0 0 1 4d0 9 2 - e000 0 0 2 4d0 a 2 - e000 0 0 3 4d0 c 2 - e000 0 0 4 4d0 7 2 + e000 0 0 1 &i8259 9 2 + e000 0 0 2 &i8259 a 2 + e000 0 0 3 &i8259 c 2 + e000 0 0 4 &i8259 7 2 /* IDSEL 0x1d */ - e800 0 0 1 4d0 9 2 - e800 0 0 2 4d0 a 2 - e800 0 0 3 4d0 b 2 - e800 0 0 4 4d0 0 0 + e800 0 0 1 &i8259 9 2 + e800 0 0 2 &i8259 a 2 + e800 0 0 3 &i8259 b 2 + e800 0 0 4 &i8259 0 0 /* IDSEL 0x1e */ - f000 0 0 1 4d0 c 2 - f000 0 0 2 4d0 0 0 - f000 0 0 3 4d0 0 0 - f000 0 0 4 4d0 0 0 + f000 0 0 1 &i8259 c 2 + f000 0 0 2 &i8259 0 0 + f000 0 0 3 &i8259 0 0 + f000 0 0 4 &i8259 0 0 /* IDSEL 0x1f */ - f800 0 0 1 4d0 6 2 - f800 0 0 2 4d0 0 0 - f800 0 0 3 4d0 0 0 - f800 0 0 4 4d0 0 0 + f800 0 0 1 &i8259 6 2 + f800 0 0 2 &i8259 0 0 + f800 0 0 3 &i8259 0 0 + f800 0 0 4 &i8259 0 0 >; - i8259@4d0 { - linux,phandle = <4d0>; + i8259: i8259@4d0 { clock-frequency = <0>; interrupt-controller; device_type = "interrupt-controller"; @@ -302,12 +296,11 @@ compatible = "chrp,iic"; big-endian; interrupts = <49 2>; - interrupt-parent = <40000>; + interrupt-parent = <&mpic>; }; }; - pic@40000 { - linux,phandle = <40000>; + mpic: pic@40000 { clock-frequency = <0>; interrupt-controller; #address-cells = <0>; @@ -316,23 +309,7 @@ built-in; compatible = "chrp,open-pic"; device_type = "open-pic"; - big-endian; - interrupts = < - 10 2 11 2 12 2 13 2 - 14 2 15 2 16 2 17 2 - 18 2 19 2 1a 2 1b 2 - 1c 2 1d 2 1e 2 1f 2 - 20 2 21 2 22 2 23 2 - 24 2 25 2 26 2 27 2 - 28 2 29 2 2a 2 2b 2 - 2c 2 2d 2 2e 2 2f 2 - 30 2 31 2 32 2 33 2 - 34 2 35 2 36 2 37 2 - 38 2 39 2 2a 2 3b 2 - 3c 2 3d 2 3e 2 3f 2 - 48 1 49 2 4a 1 - >; - interrupt-parent = <40000>; + big-endian; }; }; }; -- cgit v1.2.3 From 755f21bb894d3fe57017f5aa8f7ace8808fcb1e3 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Wed, 14 Feb 2007 14:41:01 +0900 Subject: [MIPS] Fix sigset_t endianess swapping issues in 32-bit compat code. access_ok in compat-signal.h is wrong (checking destination instead of source) and redundant (already checked before calling this function). Also sf_mask in struct sigframe32 should be compat_sigset_t type. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/kernel/signal32.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c index c28cb21514c8..9f829f63024b 100644 --- a/arch/mips/kernel/signal32.c +++ b/arch/mips/kernel/signal32.c @@ -150,7 +150,7 @@ struct sigframe32 { u32 sf_ass[4]; /* argument save space for o32 */ u32 sf_code[2]; /* signal trampoline */ struct sigcontext32 sf_sc; - sigset_t sf_mask; + compat_sigset_t sf_mask; }; struct rt_sigframe32 { @@ -166,7 +166,7 @@ struct sigframe32 { u32 sf_ass[4]; /* argument save space for o32 */ u32 sf_pad[2]; struct sigcontext32 sf_sc; /* hw context */ - sigset_t sf_mask; + compat_sigset_t sf_mask; u32 sf_code[8] ____cacheline_aligned; /* signal trampoline */ }; -- cgit v1.2.3 From f8aeb85f158fa98f8c2c9a24effb00adc06c0e85 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 14 Feb 2007 10:18:59 +0000 Subject: [MIPS] IP27: Fix warning. Signed-off-by: Ralf Baechle --- arch/mips/sgi-ip27/ip27-timer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c index 9ce513629b14..8c3c78c63ccd 100644 --- a/arch/mips/sgi-ip27/ip27-timer.c +++ b/arch/mips/sgi-ip27/ip27-timer.c @@ -190,7 +190,7 @@ static struct irq_chip rt_irq_type = { }; static struct irqaction rt_irqaction = { - .handler = ip27_rt_timer_interrupt, + .handler = (irq_handler_t) ip27_rt_timer_interrupt, .flags = IRQF_DISABLED, .mask = CPU_MASK_NONE, .name = "timer" -- cgit v1.2.3 From 140c1729a221dc6eacfcbf2a073dbf00fad13e43 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 7 Dec 2006 15:35:43 +0100 Subject: [MIPS] Iomap implementation. This implementation has support for the concept of one separate ioport address space by PCI domain. A pointer to the virtual address where the port space of a domain has been mapped has been added to struct pci_controller and systems should be fixed to fill in this value. For single domain systems this will be the same value as passed to set_io_port_base(). Signed-off-by: Ralf Baechle --- arch/mips/lib/Makefile | 3 +- arch/mips/lib/iomap-pci.c | 74 ++++++++++++++ arch/mips/lib/iomap.c | 253 ++++++++++++++++++++++++++++++++++++---------- arch/mips/pci/pci.c | 8 ++ 4 files changed, 285 insertions(+), 53 deletions(-) create mode 100644 arch/mips/lib/iomap-pci.c (limited to 'arch') diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile index 5ad501b30b43..9e5d985936b3 100644 --- a/arch/mips/lib/Makefile +++ b/arch/mips/lib/Makefile @@ -5,7 +5,8 @@ lib-y += csum_partial.o memcpy.o memset.o promlib.o \ strlen_user.o strncpy_user.o strnlen_user.o uncached.o -obj-y += iomap.o +obj-y += iomap.o +obj-$(CONFIG_PCI) += iomap-pci.o # libgcc-style stuff needed in the kernel lib-y += ashldi3.o ashrdi3.o lshrdi3.o diff --git a/arch/mips/lib/iomap-pci.c b/arch/mips/lib/iomap-pci.c new file mode 100644 index 000000000000..c11b2494bb6e --- /dev/null +++ b/arch/mips/lib/iomap-pci.c @@ -0,0 +1,74 @@ +/* + * Implement the default iomap interfaces + * + * (C) Copyright 2004 Linus Torvalds + * (C) Copyright 2006 Ralf Baechle + * (C) Copyright 2007 MIPS Technologies, Inc. + * written by Ralf Baechle + */ +#include +#include +#include + +static void __iomem *ioport_map_pci(struct pci_dev *dev, + unsigned long port, unsigned int nr) +{ + struct pci_controller *ctrl = dev->bus->sysdata; + unsigned long base = ctrl->io_map_base; + + /* This will eventually become a BUG_ON but for now be gentle */ + if (unlikely(!ctrl->io_map_base)) { + struct pci_bus *bus = dev->bus; + char name[8]; + + while (bus->parent) + bus = bus->parent; + + ctrl->io_map_base = base = mips_io_port_base; + + sprintf(name, "%04x:%02x", pci_domain_nr(bus), bus->number); + printk(KERN_WARNING "io_map_base of root PCI bus %s unset. " + "Trying to continue but you better\nfix this issue or " + "report it to linux-mips@linux-mips.org or your " + "vendor.\n", name); +#ifdef CONFIG_PCI_DOMAINS + panic("To avoid data corruption io_map_base MUST be set with " + "multiple PCI domains."); +#endif + } + + return (void __iomem *) (ctrl->io_map_base + port); +} + +/* + * Create a virtual mapping cookie for a PCI BAR (memory or IO) + */ +void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen) +{ + unsigned long start = pci_resource_start(dev, bar); + unsigned long len = pci_resource_len(dev, bar); + unsigned long flags = pci_resource_flags(dev, bar); + + if (!len || !start) + return NULL; + if (maxlen && len > maxlen) + len = maxlen; + if (flags & IORESOURCE_IO) + return ioport_map_pci(dev, start, len); + if (flags & IORESOURCE_MEM) { + if (flags & IORESOURCE_CACHEABLE) + return ioremap(start, len); + return ioremap_nocache(start, len); + } + /* What? */ + return NULL; +} + +EXPORT_SYMBOL(pci_iomap); + +void pci_iounmap(struct pci_dev *dev, void __iomem * addr) +{ + iounmap(addr); +} + +EXPORT_SYMBOL(pci_iounmap); diff --git a/arch/mips/lib/iomap.c b/arch/mips/lib/iomap.c index f4ac5bbcd81f..d51d5cb0a4a9 100644 --- a/arch/mips/lib/iomap.c +++ b/arch/mips/lib/iomap.c @@ -1,78 +1,227 @@ /* - * iomap.c, Memory Mapped I/O routines for MIPS architecture. + * Implement the default iomap interfaces * - * This code is based on lib/iomap.c, by Linus Torvalds. - * - * Copyright (C) 2004-2005 Yoichi Yuasa - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * (C) Copyright 2004 Linus Torvalds + * (C) Copyright 2006 Ralf Baechle + * (C) Copyright 2007 MIPS Technologies, Inc. + * written by Ralf Baechle + */ +#include +#include +#include + +/* + * Read/write from/to an (offsettable) iomem cookie. It might be a PIO + * access or a MMIO access, these functions don't care. The info is + * encoded in the hardware mapping set up by the mapping functions + * (or the cookie itself, depending on implementation and hw). * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. + * The generic routines don't assume any hardware mappings, and just + * encode the PIO/MMIO as part of the cookie. They coldly assume that + * the MMIO IO mappings are not in the low address range. * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * Architectures for which this is not true can't use this generic + * implementation and should do their own copy. */ -#include -#include -#include -#include +#define PIO_MASK 0x0ffffUL -void __iomem *ioport_map(unsigned long port, unsigned int nr) +unsigned int ioread8(void __iomem *addr) { - unsigned long end; + return readb(addr); +} - end = port + nr - 1UL; - if (ioport_resource.start > port || - ioport_resource.end < end || port > end) - return NULL; +EXPORT_SYMBOL(ioread8); - return (void __iomem *)(mips_io_port_base + port); +unsigned int ioread16(void __iomem *addr) +{ + return readw(addr); } -void ioport_unmap(void __iomem *addr) +EXPORT_SYMBOL(ioread16); + +unsigned int ioread16be(void __iomem *addr) { + return be16_to_cpu(__raw_readw(addr)); } -EXPORT_SYMBOL(ioport_map); -EXPORT_SYMBOL(ioport_unmap); -void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen) +EXPORT_SYMBOL(ioread16be); + +unsigned int ioread32(void __iomem *addr) { - unsigned long start, len, flags; + return readl(addr); +} - if (dev == NULL) - return NULL; +EXPORT_SYMBOL(ioread32); - start = pci_resource_start(dev, bar); - len = pci_resource_len(dev, bar); - if (!start || !len) - return NULL; +unsigned int ioread32be(void __iomem *addr) +{ + return be32_to_cpu(__raw_readl(addr)); +} - if (maxlen != 0 && len > maxlen) - len = maxlen; +EXPORT_SYMBOL(ioread32be); + +void iowrite8(u8 val, void __iomem *addr) +{ + writeb(val, addr); +} - flags = pci_resource_flags(dev, bar); - if (flags & IORESOURCE_IO) - return ioport_map(start, len); - if (flags & IORESOURCE_MEM) { - if (flags & IORESOURCE_CACHEABLE) - return ioremap_cachable(start, len); - return ioremap_nocache(start, len); +EXPORT_SYMBOL(iowrite8); + +void iowrite16(u16 val, void __iomem *addr) +{ + writew(val, addr); +} + +EXPORT_SYMBOL(iowrite16); + +void iowrite16be(u16 val, void __iomem *addr) +{ + __raw_writew(cpu_to_be16(val), addr); +} + +EXPORT_SYMBOL(iowrite16be); + +void iowrite32(u32 val, void __iomem *addr) +{ + writel(val, addr); +} + +EXPORT_SYMBOL(iowrite32); + +void iowrite32be(u32 val, void __iomem *addr) +{ + __raw_writel(cpu_to_be32(val), addr); +} + +EXPORT_SYMBOL(iowrite32be); + +/* + * These are the "repeat MMIO read/write" functions. + * Note the "__raw" accesses, since we don't want to + * convert to CPU byte order. We write in "IO byte + * order" (we also don't have IO barriers). + */ +static inline void mmio_insb(void __iomem *addr, u8 *dst, int count) +{ + while (--count >= 0) { + u8 data = __raw_readb(addr); + *dst = data; + dst++; } +} - return NULL; +static inline void mmio_insw(void __iomem *addr, u16 *dst, int count) +{ + while (--count >= 0) { + u16 data = __raw_readw(addr); + *dst = data; + dst++; + } } -void pci_iounmap(struct pci_dev *dev, void __iomem *addr) +static inline void mmio_insl(void __iomem *addr, u32 *dst, int count) { - iounmap(addr); + while (--count >= 0) { + u32 data = __raw_readl(addr); + *dst = data; + dst++; + } } -EXPORT_SYMBOL(pci_iomap); -EXPORT_SYMBOL(pci_iounmap); + +static inline void mmio_outsb(void __iomem *addr, const u8 *src, int count) +{ + while (--count >= 0) { + __raw_writeb(*src, addr); + src++; + } +} + +static inline void mmio_outsw(void __iomem *addr, const u16 *src, int count) +{ + while (--count >= 0) { + __raw_writew(*src, addr); + src++; + } +} + +static inline void mmio_outsl(void __iomem *addr, const u32 *src, int count) +{ + while (--count >= 0) { + __raw_writel(*src, addr); + src++; + } +} + +void ioread8_rep(void __iomem *addr, void *dst, unsigned long count) +{ + mmio_insb(addr, dst, count); +} + +EXPORT_SYMBOL(ioread8_rep); + +void ioread16_rep(void __iomem *addr, void *dst, unsigned long count) +{ + mmio_insw(addr, dst, count); +} + +EXPORT_SYMBOL(ioread16_rep); + +void ioread32_rep(void __iomem *addr, void *dst, unsigned long count) +{ + mmio_insl(addr, dst, count); +} + +EXPORT_SYMBOL(ioread32_rep); + +void iowrite8_rep(void __iomem *addr, const void *src, unsigned long count) +{ + mmio_outsb(addr, src, count); +} + +EXPORT_SYMBOL(iowrite8_rep); + +void iowrite16_rep(void __iomem *addr, const void *src, unsigned long count) +{ + mmio_outsw(addr, src, count); +} + +EXPORT_SYMBOL(iowrite16_rep); + +void iowrite32_rep(void __iomem *addr, const void *src, unsigned long count) +{ + mmio_outsl(addr, src, count); +} + +EXPORT_SYMBOL(iowrite32_rep); + +/* + * Create a virtual mapping cookie for an IO port range + * + * This uses the same mapping are as the in/out family which has to be setup + * by the platform initialization code. + * + * Just to make matters somewhat more interesting on MIPS systems with + * multiple host bridge each will have it's own ioport address space. + */ +static void __iomem *ioport_map_legacy(unsigned long port, unsigned int nr) +{ + return (void __iomem *) (mips_io_port_base + port); +} + +void __iomem *ioport_map(unsigned long port, unsigned int nr) +{ + if (port > PIO_MASK) + return NULL; + + return ioport_map_legacy(port, nr); +} + +EXPORT_SYMBOL(ioport_map); + +void ioport_unmap(void __iomem *addr) +{ + /* Nothing to do */ +} + +EXPORT_SYMBOL(ioport_unmap); diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c index 5ace368657ad..697a7e48cb8d 100644 --- a/arch/mips/pci/pci.c +++ b/arch/mips/pci/pci.c @@ -79,6 +79,14 @@ void __init register_pci_controller(struct pci_controller *hose) { *hose_tail = hose; hose_tail = &hose->next; + + /* + * Do not panic here but later - this might hapen before console init. + */ + if (!hose->io_map_base) { + printk(KERN_WARNING + "registering PCI controller with io_map_base unset\n"); + } } /* Most MIPS systems have straight-forward swizzling needs. */ -- cgit v1.2.3 From 38201fb23cd554f942702cd938c3215a76296c87 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 15 Feb 2007 01:53:00 +0000 Subject: [MIPS] Fix CONFIG_MIPS32_N32=y CONFIG_MIPS32_O32=n build Signed-off-by: Ralf Baechle --- arch/mips/kernel/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index 1bf2c8448912..8faf1b40cd66 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -53,9 +53,9 @@ obj-$(CONFIG_MIPS_BOARDS_GEN) += irq-msc01.o obj-$(CONFIG_32BIT) += scall32-o32.o obj-$(CONFIG_64BIT) += scall64-64.o obj-$(CONFIG_BINFMT_IRIX) += binfmt_irix.o -obj-$(CONFIG_MIPS32_COMPAT) += linux32.o signal32.o +obj-$(CONFIG_MIPS32_COMPAT) += linux32.o ptrace32.o signal32.o obj-$(CONFIG_MIPS32_N32) += binfmt_elfn32.o scall64-n32.o signal_n32.o -obj-$(CONFIG_MIPS32_O32) += binfmt_elfo32.o scall64-o32.o ptrace32.o +obj-$(CONFIG_MIPS32_O32) += binfmt_elfo32.o scall64-o32.o obj-$(CONFIG_KGDB) += gdb-low.o gdb-stub.o obj-$(CONFIG_PROC_FS) += proc.o -- cgit v1.2.3 From 151fd6acd94e12ef3a7d5fa0911a2590690c493f Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 15 Feb 2007 11:40:37 +0000 Subject: [MIPS] signals: Share even more code. native and compat do_signal and handle_signal are identical and can easily be unified. Signed-off-by: Ralf Baechle --- arch/mips/kernel/process.c | 33 ------------ arch/mips/kernel/signal.c | 18 +++++-- arch/mips/kernel/signal32.c | 118 ++++-------------------------------------- arch/mips/kernel/signal_n32.c | 8 ++- 4 files changed, 31 insertions(+), 146 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c index 04e5b38d327d..9704c21607a2 100644 --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c @@ -26,7 +26,6 @@ #include #include -#include #include #include #include @@ -66,38 +65,6 @@ ATTRIB_NORET void cpu_idle(void) } } -/* - * Native o32 and N64 ABI without DSP ASE - */ -struct mips_abi mips_abi = { - .do_signal = do_signal, -#ifdef CONFIG_TRAD_SIGNALS - .setup_frame = setup_frame, -#endif - .setup_rt_frame = setup_rt_frame -}; - -#ifdef CONFIG_MIPS32_O32 -/* - * o32 compatibility on 64-bit kernels, without DSP ASE - */ -struct mips_abi mips_abi_32 = { - .do_signal = do_signal32, - .setup_frame = setup_frame_32, - .setup_rt_frame = setup_rt_frame_32 -}; -#endif /* CONFIG_MIPS32_O32 */ - -#ifdef CONFIG_MIPS32_N32 -/* - * N32 on 64-bit kernels, without DSP ASE - */ -struct mips_abi mips_abi_n32 = { - .do_signal = do_signal, - .setup_rt_frame = setup_rt_frame_n32 -}; -#endif /* CONFIG_MIPS32_N32 */ - asmlinkage void ret_from_fork(void); void start_thread(struct pt_regs * regs, unsigned long pc, unsigned long sp) diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c index b2e9ab1bb101..adbfb95e42d0 100644 --- a/arch/mips/kernel/signal.c +++ b/arch/mips/kernel/signal.c @@ -398,7 +398,7 @@ badframe: } #ifdef CONFIG_TRAD_SIGNALS -int setup_frame(struct k_sigaction * ka, struct pt_regs *regs, +static int setup_frame(struct k_sigaction * ka, struct pt_regs *regs, int signr, sigset_t *set) { struct sigframe __user *frame; @@ -443,7 +443,7 @@ give_sigsegv: } #endif -int setup_rt_frame(struct k_sigaction * ka, struct pt_regs *regs, +static int setup_rt_frame(struct k_sigaction * ka, struct pt_regs *regs, int signr, sigset_t *set, siginfo_t *info) { struct rt_sigframe __user *frame; @@ -501,6 +501,14 @@ give_sigsegv: return -EFAULT; } +struct mips_abi mips_abi = { +#ifdef CONFIG_TRAD_SIGNALS + .setup_frame = setup_frame, +#endif + .setup_rt_frame = setup_rt_frame, + .restart = __NR_restart_syscall +}; + static int handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, sigset_t *oldset, struct pt_regs *regs) { @@ -539,7 +547,7 @@ static int handle_signal(unsigned long sig, siginfo_t *info, return ret; } -void do_signal(struct pt_regs *regs) +static void do_signal(struct pt_regs *regs) { struct k_sigaction ka; sigset_t *oldset; @@ -589,7 +597,7 @@ void do_signal(struct pt_regs *regs) regs->cp0_epc -= 8; } if (regs->regs[2] == ERESTART_RESTARTBLOCK) { - regs->regs[2] = __NR_restart_syscall; + regs->regs[2] = current->thread.abi->restart; regs->regs[7] = regs->regs[26]; regs->cp0_epc -= 4; } @@ -615,5 +623,5 @@ asmlinkage void do_notify_resume(struct pt_regs *regs, void *unused, { /* deal with pending signal delivery */ if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK)) - current->thread.abi->do_signal(regs); + do_signal(regs); } diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c index 9f829f63024b..02062fc59f77 100644 --- a/arch/mips/kernel/signal32.c +++ b/arch/mips/kernel/signal32.c @@ -104,7 +104,7 @@ typedef struct compat_siginfo { */ #define __NR_O32_sigreturn 4119 #define __NR_O32_rt_sigreturn 4193 -#define __NR_O32_restart_syscall 4253 +#define __NR_O32_restart_syscall 4253 /* 32-bit compatibility types */ @@ -598,7 +598,7 @@ badframe: force_sig(SIGSEGV, current); } -int setup_frame_32(struct k_sigaction * ka, struct pt_regs *regs, +static int setup_frame_32(struct k_sigaction * ka, struct pt_regs *regs, int signr, sigset_t *set) { struct sigframe32 __user *frame; @@ -644,7 +644,7 @@ give_sigsegv: return -EFAULT; } -int setup_rt_frame_32(struct k_sigaction * ka, struct pt_regs *regs, +static int setup_rt_frame_32(struct k_sigaction * ka, struct pt_regs *regs, int signr, sigset_t *set, siginfo_t *info) { struct rt_sigframe32 __user *frame; @@ -704,110 +704,14 @@ give_sigsegv: return -EFAULT; } -static inline int handle_signal(unsigned long sig, siginfo_t *info, - struct k_sigaction *ka, sigset_t *oldset, struct pt_regs * regs) -{ - int ret; - - switch (regs->regs[0]) { - case ERESTART_RESTARTBLOCK: - case ERESTARTNOHAND: - regs->regs[2] = EINTR; - break; - case ERESTARTSYS: - if (!(ka->sa.sa_flags & SA_RESTART)) { - regs->regs[2] = EINTR; - break; - } - /* fallthrough */ - case ERESTARTNOINTR: /* Userland will reload $v0. */ - regs->regs[7] = regs->regs[26]; - regs->cp0_epc -= 8; - } - - regs->regs[0] = 0; /* Don't deal with this again. */ - - if (ka->sa.sa_flags & SA_SIGINFO) - ret = current->thread.abi->setup_rt_frame(ka, regs, sig, oldset, info); - else - ret = current->thread.abi->setup_frame(ka, regs, sig, oldset); - - spin_lock_irq(¤t->sighand->siglock); - sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); - if (!(ka->sa.sa_flags & SA_NODEFER)) - sigaddset(¤t->blocked,sig); - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - - return ret; -} - -void do_signal32(struct pt_regs *regs) -{ - struct k_sigaction ka; - sigset_t *oldset; - siginfo_t info; - int signr; - - /* - * We want the common case to go fast, which is why we may in certain - * cases get here from kernel mode. Just return without doing anything - * if so. - */ - if (!user_mode(regs)) - return; - - if (test_thread_flag(TIF_RESTORE_SIGMASK)) - oldset = ¤t->saved_sigmask; - else - oldset = ¤t->blocked; - - signr = get_signal_to_deliver(&info, &ka, regs, NULL); - if (signr > 0) { - /* Whee! Actually deliver the signal. */ - if (handle_signal(signr, &info, &ka, oldset, regs) == 0) { - /* - * A signal was successfully delivered; the saved - * sigmask will have been stored in the signal frame, - * and will be restored by sigreturn, so we can simply - * clear the TIF_RESTORE_SIGMASK flag. - */ - if (test_thread_flag(TIF_RESTORE_SIGMASK)) - clear_thread_flag(TIF_RESTORE_SIGMASK); - } - - return; - } - - /* - * Who's code doesn't conform to the restartable syscall convention - * dies here!!! The li instruction, a single machine instruction, - * must directly be followed by the syscall instruction. - */ - if (regs->regs[0]) { - if (regs->regs[2] == ERESTARTNOHAND || - regs->regs[2] == ERESTARTSYS || - regs->regs[2] == ERESTARTNOINTR) { - regs->regs[7] = regs->regs[26]; - regs->cp0_epc -= 8; - } - if (regs->regs[2] == ERESTART_RESTARTBLOCK) { - regs->regs[2] = __NR_O32_restart_syscall; - regs->regs[7] = regs->regs[26]; - regs->cp0_epc -= 4; - } - regs->regs[0] = 0; /* Don't deal with this again. */ - } - - /* - * If there's no signal to deliver, we just put the saved sigmask - * back - */ - if (test_thread_flag(TIF_RESTORE_SIGMASK)) { - clear_thread_flag(TIF_RESTORE_SIGMASK); - sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL); - } -} +/* + * o32 compatibility on 64-bit kernels, without DSP ASE + */ +struct mips_abi mips_abi_32 = { + .setup_frame = setup_frame_32, + .setup_rt_frame = setup_rt_frame_32, + .restart = __NR_O32_restart_syscall +}; asmlinkage int sys32_rt_sigaction(int sig, const struct sigaction32 __user *act, struct sigaction32 __user *oact, diff --git a/arch/mips/kernel/signal_n32.c b/arch/mips/kernel/signal_n32.c index 7ca2a078841f..ecf1f7ecaad9 100644 --- a/arch/mips/kernel/signal_n32.c +++ b/arch/mips/kernel/signal_n32.c @@ -29,6 +29,7 @@ #include #include +#include #include #include #include @@ -169,7 +170,7 @@ badframe: force_sig(SIGSEGV, current); } -int setup_rt_frame_n32(struct k_sigaction * ka, +static int setup_rt_frame_n32(struct k_sigaction * ka, struct pt_regs *regs, int signr, sigset_t *set, siginfo_t *info) { struct rt_sigframe_n32 __user *frame; @@ -228,3 +229,8 @@ give_sigsegv: force_sigsegv(signr, current); return -EFAULT; } + +struct mips_abi mips_abi_n32 = { + .setup_rt_frame = setup_rt_frame_n32, + .restart = __NR_N32_restart_syscall +}; -- cgit v1.2.3 From b6dcec9ba4cdfeec937c045d275a5c330a1dbe16 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sun, 18 Feb 2007 15:57:09 +0000 Subject: [MIPS] Make __declare_dbe_table static and avoid it getting optimized away Signed-off-by: Ralf Baechle --- arch/mips/kernel/traps.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 2a932cada244..f663c63d5dd3 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -340,13 +340,9 @@ NORET_TYPE void ATTRIB_NORET die(const char * str, struct pt_regs * regs) extern const struct exception_table_entry __start___dbe_table[]; extern const struct exception_table_entry __stop___dbe_table[]; -void __declare_dbe_table(void) -{ - __asm__ __volatile__( - ".section\t__dbe_table,\"a\"\n\t" - ".previous" - ); -} +__asm__( +" .section __dbe_table, \"a\"\n" +" .previous \n"); /* Given an address, look for it in the exception tables. */ static const struct exception_table_entry *search_dbe_tables(unsigned long addr) -- cgit v1.2.3 From db0b937daf9bee741aa8fd488ea657872b9579fe Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Mon, 19 Feb 2007 00:54:27 +0900 Subject: [MIPS] Make kernel_thread_helper() static Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/kernel/process.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c index 9704c21607a2..a669089e4672 100644 --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c @@ -213,7 +213,7 @@ int dump_task_fpu (struct task_struct *t, elf_fpregset_t *fpr) /* * Create a kernel thread */ -ATTRIB_NORET void kernel_thread_helper(void *arg, int (*fn)(void *)) +static ATTRIB_NORET void kernel_thread_helper(void *arg, int (*fn)(void *)) { do_exit(fn(arg)); } -- cgit v1.2.3 From 6a1e552947b0d73310e534bf4eb09e14db1e5056 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Mon, 19 Feb 2007 01:27:34 +0900 Subject: [MIPS] Add external declaration of pagetable_init() to pgalloc.h This fixes some sparse warnings. pgtable-32.c:15:6: warning: symbol 'pgd_init' was not declared. Should it be static? pgtable-32.c:32:13: warning: symbol 'pagetable_init' was not declared. Should it be static? Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/mm/init.c | 2 -- arch/mips/mm/pgtable-32.c | 1 + arch/mips/mm/pgtable-64.c | 1 + arch/mips/sgi-ip27/ip27-memory.c | 2 +- 4 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c index 125a4a85ec05..13a420844436 100644 --- a/arch/mips/mm/init.c +++ b/arch/mips/mm/init.c @@ -314,8 +314,6 @@ void __init fixrange_init(unsigned long start, unsigned long end, } #ifndef CONFIG_NEED_MULTIPLE_NODES -extern void pagetable_init(void); - static int __init page_is_ram(unsigned long pagenr) { int i; diff --git a/arch/mips/mm/pgtable-32.c b/arch/mips/mm/pgtable-32.c index 4a61e624b0ec..575e4019227b 100644 --- a/arch/mips/mm/pgtable-32.c +++ b/arch/mips/mm/pgtable-32.c @@ -11,6 +11,7 @@ #include #include #include +#include void pgd_init(unsigned long page) { diff --git a/arch/mips/mm/pgtable-64.c b/arch/mips/mm/pgtable-64.c index c46eb651bf09..e4b565aeb008 100644 --- a/arch/mips/mm/pgtable-64.c +++ b/arch/mips/mm/pgtable-64.c @@ -10,6 +10,7 @@ #include #include #include +#include void pgd_init(unsigned long page) { diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c index 0e3d535e9f43..fe8a1066aec1 100644 --- a/arch/mips/sgi-ip27/ip27-memory.c +++ b/arch/mips/sgi-ip27/ip27-memory.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include @@ -503,7 +504,6 @@ void __init prom_free_prom_memory(void) /* We got nothing to free here ... */ } -extern void pagetable_init(void); extern unsigned long setup_zero_pages(void); void __init paging_init(void) -- cgit v1.2.3 From 5759906ca9e5201c3fd40d61c861ec1e441d3a24 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sun, 18 Feb 2007 19:07:31 +0000 Subject: [MIPS] Include to for declaration of check_bugs32. Signed-off-by: Ralf Baechle --- arch/mips/kernel/cpu-probe.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index f59ef271d247..50ed6d58ae71 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -16,6 +16,7 @@ #include #include +#include #include #include #include -- cgit v1.2.3 From c066a32a890c50ce59e91f8cea8eb5fd8d5821b9 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Thu, 28 Dec 2006 18:22:32 +0100 Subject: [MIPS] Support for several more SNI RM models. Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 5 +- arch/mips/pci/fixup-sni.c | 66 +++++++- arch/mips/pci/ops-sni.c | 77 ++++++++- arch/mips/sni/Makefile | 2 +- arch/mips/sni/a20r.c | 227 +++++++++++++++++++++++++++ arch/mips/sni/ds1216.c | 81 ++++++++++ arch/mips/sni/irq.c | 188 ++++++---------------- arch/mips/sni/pcimt.c | 390 ++++++++++++++++++++++++++++++++++++++++++++++ arch/mips/sni/pcit.c | 351 +++++++++++++++++++++++++++++++++++++++++ arch/mips/sni/reset.c | 9 +- arch/mips/sni/rm200.c | 186 ++++++++++++++++++++++ arch/mips/sni/setup.c | 242 ++++------------------------ arch/mips/sni/sniprom.c | 129 +++++++++++++-- arch/mips/sni/time.c | 148 ++++++++++++++++++ 14 files changed, 1719 insertions(+), 382 deletions(-) create mode 100644 arch/mips/sni/a20r.c create mode 100644 arch/mips/sni/ds1216.c create mode 100644 arch/mips/sni/pcimt.c create mode 100644 arch/mips/sni/pcit.c create mode 100644 arch/mips/sni/rm200.c create mode 100644 arch/mips/sni/time.c (limited to 'arch') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index a92ce6bd7cf1..46fa5ca9f5ac 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -726,15 +726,16 @@ config SNI_RM select BOOT_ELF32 select DMA_NONCOHERENT select GENERIC_ISA_DMA - select HAVE_STD_PC_SERIAL_PORT select HW_HAS_EISA select HW_HAS_PCI + select IRQ_CPU select I8253 select I8259 select ISA select SWAP_IO_SPACE if CPU_BIG_ENDIAN select SYS_HAS_CPU_R4X00 select SYS_HAS_CPU_R5000 + select SYS_HAS_CPU_R10000 select R5000_CPU_SCACHE select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL @@ -1066,7 +1067,7 @@ config BOOT_ELF32 config MIPS_L1_CACHE_SHIFT int - default "4" if MACH_DECSTATION + default "4" if MACH_DECSTATION || SNI_RM default "7" if SGI_IP27 default "5" diff --git a/arch/mips/pci/fixup-sni.c b/arch/mips/pci/fixup-sni.c index a176f2ca8656..0c9a4732d455 100644 --- a/arch/mips/pci/fixup-sni.c +++ b/arch/mips/pci/fixup-sni.c @@ -15,7 +15,7 @@ #include /* - * Shortcuts ... + * PCIMT Shortcuts ... */ #define SCSI PCIMT_IRQ_SCSI #define ETH PCIMT_IRQ_ETHERNET @@ -67,6 +67,50 @@ static char irq_tab_rm300d[8][5] __initdata = { { 0, INTD, INTA, INTB, INTC }, /* Slot 4 */ }; +static char irq_tab_rm300e[5][5] __initdata = { + /* INTA INTB INTC INTD */ + { 0, 0, 0, 0, 0 }, /* HOST bridge */ + { SCSI, SCSI, SCSI, SCSI, SCSI }, /* SCSI */ + { 0, INTC, INTD, INTA, INTB }, /* Bridge/i960 */ + { 0, INTD, INTA, INTB, INTC }, /* Slot 1 */ + { 0, INTA, INTB, INTC, INTD }, /* Slot 2 */ +}; +#undef SCSI +#undef ETH +#undef INTA +#undef INTB +#undef INTC +#undef INTD + + +/* + * PCIT Shortcuts ... + */ +#define SCSI0 PCIT_IRQ_SCSI0 +#define SCSI1 PCIT_IRQ_SCSI1 +#define ETH PCIT_IRQ_ETHERNET +#define INTA PCIT_IRQ_INTA +#define INTB PCIT_IRQ_INTB +#define INTC PCIT_IRQ_INTC +#define INTD PCIT_IRQ_INTD + +static char irq_tab_pcit[13][5] __initdata = { + /* INTA INTB INTC INTD */ + { 0, 0, 0, 0, 0 }, /* HOST bridge */ + { SCSI0, SCSI0, SCSI0, SCSI0, SCSI0 }, /* SCSI */ + { SCSI1, SCSI1, SCSI1, SCSI1, SCSI1 }, /* SCSI */ + { ETH, ETH, ETH, ETH, ETH }, /* Ethernet */ + { 0, INTA, INTB, INTC, INTD }, /* PCI-PCI bridge */ + { 0, 0, 0, 0, 0 }, /* Unused */ + { 0, 0, 0, 0, 0 }, /* Unused */ + { 0, 0, 0, 0, 0 }, /* Unused */ + { 0, INTA, INTB, INTC, INTD }, /* Slot 1 */ + { 0, INTB, INTC, INTD, INTA }, /* Slot 2 */ + { 0, INTC, INTD, INTA, INTB }, /* Slot 3 */ + { 0, INTD, INTA, INTB, INTC }, /* Slot 4 */ + { 0, INTA, INTB, INTC, INTD }, /* Slot 5 */ +}; + static inline int is_rm300_revd(void) { unsigned char csmsr = *(volatile unsigned char *)PCIMT_CSMSR; @@ -76,10 +120,24 @@ static inline int is_rm300_revd(void) int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { - if (is_rm300_revd()) - return irq_tab_rm300d[slot][pin]; + switch (sni_brd_type) { + case SNI_BRD_PCI_TOWER: + case SNI_BRD_PCI_TOWER_CPLUS: + return irq_tab_pcit[slot][pin]; + + case SNI_BRD_PCI_MTOWER: + if (is_rm300_revd()) + return irq_tab_rm300d[slot][pin]; + /* fall through */ - return irq_tab_rm200[slot][pin]; + case SNI_BRD_PCI_DESKTOP: + return irq_tab_rm200[slot][pin]; + + case SNI_BRD_PCI_MTOWER_CPLUS: + return irq_tab_rm300e[slot][pin]; + } + + return 0; } /* Do platform specific device initialization at pci_enable_device() time */ diff --git a/arch/mips/pci/ops-sni.c b/arch/mips/pci/ops-sni.c index 2b0ccd6d9dcd..fa2d2c60f797 100644 --- a/arch/mips/pci/ops-sni.c +++ b/arch/mips/pci/ops-sni.c @@ -83,7 +83,82 @@ static int pcimt_write(struct pci_bus *bus, unsigned int devfn, int reg, return 0; } -struct pci_ops sni_pci_ops = { +struct pci_ops sni_pcimt_ops = { .read = pcimt_read, .write = pcimt_write, }; + +static int pcit_set_config_address(unsigned int busno, unsigned int devfn, int reg) +{ + if ((devfn > 255) || (reg > 255) || (busno > 255)) + return PCIBIOS_BAD_REGISTER_NUMBER; + + outl ((1 << 31) | ((busno & 0xff) << 16) | ((devfn & 0xff) << 8) | (reg & 0xfc), 0xcf8); + return PCIBIOS_SUCCESSFUL; +} + +static int pcit_read(struct pci_bus *bus, unsigned int devfn, int reg, + int size, u32 * val) +{ + int res; + + /* + * on bus 0 we need to check, whether there is a device answering + * for the devfn by doing a config write and checking the result. If + * we don't do it, we will get a data bus error + */ + if (bus->number == 0) { + pcit_set_config_address (0, 0, 0x68); + outl (inl (0xcfc) | 0xc0000000, 0xcfc); + if ((res = pcit_set_config_address(0, devfn, 0))) + return res; + outl (0xffffffff, 0xcfc); + pcit_set_config_address (0, 0, 0x68); + if (inl(0xcfc) & 0x100000) + return PCIBIOS_DEVICE_NOT_FOUND; + } + if ((res = pcit_set_config_address(bus->number, devfn, reg))) + return res; + + switch (size) { + case 1: + *val = inb(PCIMT_CONFIG_DATA + (reg & 3)); + break; + case 2: + *val = inw(PCIMT_CONFIG_DATA + (reg & 2)); + break; + case 4: + *val = inl(PCIMT_CONFIG_DATA); + break; + } + return 0; +} + +static int pcit_write(struct pci_bus *bus, unsigned int devfn, int reg, + int size, u32 val) +{ + int res; + + if ((res = pcit_set_config_address(bus->number, devfn, reg))) + return res; + + switch (size) { + case 1: + outb (val, PCIMT_CONFIG_DATA + (reg & 3)); + break; + case 2: + outw (val, PCIMT_CONFIG_DATA + (reg & 2)); + break; + case 4: + outl (val, PCIMT_CONFIG_DATA); + break; + } + + return 0; +} + + +struct pci_ops sni_pcit_ops = { + .read = pcit_read, + .write = pcit_write, +}; diff --git a/arch/mips/sni/Makefile b/arch/mips/sni/Makefile index a5eb0adb87c7..e30809a92151 100644 --- a/arch/mips/sni/Makefile +++ b/arch/mips/sni/Makefile @@ -2,7 +2,7 @@ # Makefile for the SNI specific part of the kernel # -obj-y += irq.o pcimt_scache.o reset.o setup.o +obj-y += irq.o reset.o setup.o ds1216.o a20r.o rm200.o pcimt.o pcit.o time.o obj-$(CONFIG_CPU_BIG_ENDIAN) += sniprom.o EXTRA_AFLAGS := $(CFLAGS) diff --git a/arch/mips/sni/a20r.c b/arch/mips/sni/a20r.c new file mode 100644 index 000000000000..31ab80f1befa --- /dev/null +++ b/arch/mips/sni/a20r.c @@ -0,0 +1,227 @@ +/* + * A20R specific code + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2006 Thomas Bogendoerfer (tsbogend@alpha.franken.de) + */ + +#include +#include +#include +#include + +#include +#include +#include + +#define PORT(_base,_irq) \ + { \ + .iobase = _base, \ + .irq = _irq, \ + .uartclk = 1843200, \ + .iotype = UPIO_PORT, \ + .flags = UPF_BOOT_AUTOCONF, \ + } + +static struct plat_serial8250_port a20r_data[] = { + PORT(0x3f8, 4), + PORT(0x2f8, 3), + { }, +}; + +static struct platform_device a20r_serial8250_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = a20r_data, + }, +}; + +static struct resource snirm_82596_rsrc[] = { + { + .start = 0xb8000000, + .end = 0xb8000004, + .flags = IORESOURCE_MEM + }, + { + .start = 0xb8010000, + .end = 0xb8010004, + .flags = IORESOURCE_MEM + }, + { + .start = 0xbff00000, + .end = 0xbff00020, + .flags = IORESOURCE_MEM + }, + { + .start = 22, + .end = 22, + .flags = IORESOURCE_IRQ + }, + { + .flags = 0x01 /* 16bit mpu port access */ + } +}; + +static struct platform_device snirm_82596_pdev = { + .name = "snirm_82596", + .num_resources = ARRAY_SIZE(snirm_82596_rsrc), + .resource = snirm_82596_rsrc +}; + +static struct resource snirm_53c710_rsrc[] = { + { + .start = 0xb9000000, + .end = 0xb90fffff, + .flags = IORESOURCE_MEM + }, + { + .start = 19, + .end = 19, + .flags = IORESOURCE_IRQ + } +}; + +static struct platform_device snirm_53c710_pdev = { + .name = "snirm_53c710", + .num_resources = ARRAY_SIZE(snirm_53c710_rsrc), + .resource = snirm_53c710_rsrc +}; + +static struct resource sc26xx_rsrc[] = { + { + .start = 0xbc070000, + .end = 0xbc0700ff, + .flags = IORESOURCE_MEM + }, + { + .start = 20, + .end = 20, + .flags = IORESOURCE_IRQ + } +}; + +static struct platform_device sc26xx_pdev = { + .name = "SC26xx", + .num_resources = ARRAY_SIZE(sc26xx_rsrc), + .resource = sc26xx_rsrc +}; + +static u32 a20r_ack_hwint(void) +{ + u32 status = read_c0_status(); + + write_c0_status (status | 0x00010000); + asm volatile( + " .set push \n" + " .set noat \n" + " .set noreorder \n" + " lw $1, 0(%0) \n" + " sb $0, 0(%1) \n" + " sync \n" + " lb %1, 0(%1) \n" + " b 1f \n" + " ori %1, $1, 2 \n" + " .align 8 \n" + "1: \n" + " nop \n" + " sw %1, 0(%0) \n" + " sync \n" + " li %1, 0x20 \n" + "2: \n" + " nop \n" + " bnez %1,2b \n" + " addiu %1, -1 \n" + " sw $1, 0(%0) \n" + " sync \n" + ".set pop \n" + : + : "Jr" (PCIMT_UCONF), "Jr" (0xbc000000)); + write_c0_status(status); + + return status; +} + +static inline void unmask_a20r_irq(unsigned int irq) +{ + set_c0_status(0x100 << (irq - SNI_A20R_IRQ_BASE)); + irq_enable_hazard(); +} + +static inline void mask_a20r_irq(unsigned int irq) +{ + clear_c0_status(0x100 << (irq - SNI_A20R_IRQ_BASE)); + irq_disable_hazard(); +} + +static void end_a20r_irq(unsigned int irq) +{ + if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) { + a20r_ack_hwint(); + unmask_a20r_irq(irq); + } +} + +static struct irq_chip a20r_irq_type = { + .typename = "A20R", + .ack = mask_a20r_irq, + .mask = mask_a20r_irq, + .mask_ack = mask_a20r_irq, + .unmask = unmask_a20r_irq, + .end = end_a20r_irq, +}; + +/* + * hwint 0 receive all interrupts + */ +static void a20r_hwint(void) +{ + u32 cause, status; + int irq; + + clear_c0_status (IE_IRQ0); + status = a20r_ack_hwint(); + cause = read_c0_cause(); + + irq = ffs(((cause & status) >> 8) & 0xf8); + if (likely(irq > 0)) + do_IRQ(SNI_A20R_IRQ_BASE + irq - 1); + set_c0_status(IE_IRQ0); +} + +void __init sni_a20r_irq_init(void) +{ + int i; + + for (i = SNI_A20R_IRQ_BASE + 2 ; i < SNI_A20R_IRQ_BASE + 8; i++) + set_irq_chip(i, &a20r_irq_type); + sni_hwint = a20r_hwint; + change_c0_status(ST0_IM, IE_IRQ0); + setup_irq (SNI_A20R_IRQ_BASE + 3, &sni_isa_irq); +} + +void sni_a20r_init(void) +{ + ds1216_base = (volatile unsigned char *) SNI_DS1216_A20R_BASE; + rtc_mips_get_time = ds1216_get_cmos_time; +} + +static int __init snirm_a20r_setup_devinit(void) +{ + switch (sni_brd_type) { + case SNI_BRD_TOWER_OASIC: + case SNI_BRD_MINITOWER: + platform_device_register(&snirm_82596_pdev); + platform_device_register(&snirm_53c710_pdev); + platform_device_register(&sc26xx_pdev); + platform_device_register(&a20r_serial8250_device); + break; + } + + return 0; +} + +device_initcall(snirm_a20r_setup_devinit); diff --git a/arch/mips/sni/ds1216.c b/arch/mips/sni/ds1216.c new file mode 100644 index 000000000000..1d92732c14f1 --- /dev/null +++ b/arch/mips/sni/ds1216.c @@ -0,0 +1,81 @@ + +#include +#include + +#include + +volatile unsigned char *ds1216_base; + +/* + * Read the 64 bit we'd like to have - It a series + * of 64 bits showing up in the LSB of the base register. + * + */ +static unsigned char *ds1216_read(void) +{ + static unsigned char rdbuf[8]; + unsigned char c; + int i, j; + + for (i = 0; i < 8; i++) { + c = 0x0; + for (j = 0; j < 8; j++) { + c |= (*ds1216_base & 0x1) << j; + } + rdbuf[i] = c; + } + + return rdbuf; +} + +static void ds1216_switch_ds_to_clock(void) +{ + unsigned char magic[] = { + 0xc5, 0x3a, 0xa3, 0x5c, 0xc5, 0x3a, 0xa3, 0x5c + }; + int i,j,c; + + /* Reset magic pointer */ + c = *ds1216_base; + + /* Write 64 bit magic to DS1216 */ + for (i = 0; i < 8; i++) { + c = magic[i]; + for (j = 0; j < 8; j++) { + *ds1216_base = c; + c = c >> 1; + } + } +} + +unsigned long ds1216_get_cmos_time(void) +{ + unsigned char *rdbuf; + unsigned int year, month, date, hour, min, sec; + + ds1216_switch_ds_to_clock(); + rdbuf = ds1216_read(); + + sec = BCD2BIN(DS1216_SEC(rdbuf)); + min = BCD2BIN(DS1216_MIN(rdbuf)); + hour = BCD2BIN(DS1216_HOUR(rdbuf)); + date = BCD2BIN(DS1216_DATE(rdbuf)); + month = BCD2BIN(DS1216_MONTH(rdbuf)); + year = BCD2BIN(DS1216_YEAR(rdbuf)); + + if (DS1216_1224(rdbuf) && DS1216_AMPM(rdbuf)) + hour+=12; + + if (year < 70) + year += 2000; + else + year += 1900; + + return mktime(year, month, date, hour, min, sec); +} + +int ds1216_set_rtc_mmss(unsigned long nowtime) +{ + printk("ds1216_set_rtc_mmss called but not implemented\n"); + return -1; +} diff --git a/arch/mips/sni/irq.c b/arch/mips/sni/irq.c index 039e8e540508..ad5fc471a004 100644 --- a/arch/mips/sni/irq.c +++ b/arch/mips/sni/irq.c @@ -5,6 +5,7 @@ * * Copyright (C) 1992 Linus Torvalds * Copyright (C) 1994 - 2000 Ralf Baechle + * Copyright (C) 2006 Thomas Bogendoerfer */ #include #include @@ -15,152 +16,34 @@ #include #include #include +#include +#include -static void enable_pciasic_irq(unsigned int irq) -{ - unsigned int mask = 1 << (irq - PCIMT_IRQ_INT2); - - *(volatile u8 *) PCIMT_IRQSEL |= mask; -} - -void disable_pciasic_irq(unsigned int irq) -{ - unsigned int mask = ~(1 << (irq - PCIMT_IRQ_INT2)); - - *(volatile u8 *) PCIMT_IRQSEL &= mask; -} +void (*sni_hwint)(void); -static void end_pciasic_irq(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) - enable_pciasic_irq(irq); -} - -static struct irq_chip pciasic_irq_type = { - .name = "ASIC-PCI", - .ack = disable_pciasic_irq, - .mask = disable_pciasic_irq, - .mask_ack = disable_pciasic_irq, - .unmask = enable_pciasic_irq, - .end = end_pciasic_irq, -}; - -/* - * hwint0 should deal with MP agent, ASIC PCI, EISA NMI and debug - * button interrupts. Later ... - */ -static void pciasic_hwint0(void) -{ - panic("Received int0 but no handler yet ..."); -} - -/* This interrupt was used for the com1 console on the first prototypes. */ -static void pciasic_hwint2(void) -{ - /* I think this shouldn't happen on production machines. */ - panic("hwint2 and no handler yet"); -} - -/* hwint5 is the r4k count / compare interrupt */ -static void pciasic_hwint5(void) -{ - panic("hwint5 and no handler yet"); -} - -static unsigned int ls1bit8(unsigned int x) -{ - int b = 7, s; - - s = 4; if ((x & 0x0f) == 0) s = 0; b -= s; x <<= s; - s = 2; if ((x & 0x30) == 0) s = 0; b -= s; x <<= s; - s = 1; if ((x & 0x40) == 0) s = 0; b -= s; - - return b; -} - -/* - * hwint 1 deals with EISA and SCSI interrupts, - * - * The EISA_INT bit in CSITPEND is high active, all others are low active. - */ -static void pciasic_hwint1(void) +asmlinkage void plat_irq_dispatch(void) { - u8 pend = *(volatile char *)PCIMT_CSITPEND; - unsigned long flags; - - if (pend & IT_EISA) { - int irq; - /* - * Note: ASIC PCI's builtin interrupt achknowledge feature is - * broken. Using it may result in loss of some or all i8259 - * interupts, so don't use PCIMT_INT_ACKNOWLEDGE ... - */ - irq = i8259_irq(); - if (unlikely(irq < 0)) - return; - - do_IRQ(irq); - } - - if (!(pend & IT_SCSI)) { - flags = read_c0_status(); - clear_c0_status(ST0_IM); - do_IRQ(PCIMT_IRQ_SCSI); - write_c0_status(flags); - } + sni_hwint(); } -/* - * hwint 3 should deal with the PCI A - D interrupts, - */ -static void pciasic_hwint3(void) +/* ISA irq handler */ +static irqreturn_t sni_isa_irq_handler(int dummy, void *p) { - u8 pend = *(volatile char *)PCIMT_CSITPEND; int irq; - pend &= (IT_INTA | IT_INTB | IT_INTC | IT_INTD); - clear_c0_status(IE_IRQ3); - irq = PCIMT_IRQ_INT2 + ls1bit8(pend); - do_IRQ(irq); - set_c0_status(IE_IRQ3); -} + irq = i8259_irq(); + if (unlikely(irq < 0)) + return IRQ_NONE; -/* - * hwint 4 is used for only the onboard PCnet 32. - */ -static void pciasic_hwint4(void) -{ - clear_c0_status(IE_IRQ4); - do_IRQ(PCIMT_IRQ_ETHERNET); - set_c0_status(IE_IRQ4); -} - -asmlinkage void plat_irq_dispatch(void) -{ - unsigned int pending = read_c0_status() & read_c0_cause(); - static unsigned char led_cache; - - *(volatile unsigned char *) PCIMT_CSLED = ++led_cache; - - if (pending & 0x0800) - pciasic_hwint1(); - else if (pending & 0x4000) - pciasic_hwint4(); - else if (pending & 0x2000) - pciasic_hwint3(); - else if (pending & 0x1000) - pciasic_hwint2(); - else if (pending & 0x8000) - pciasic_hwint5(); - else if (pending & 0x0400) - pciasic_hwint0(); + do_IRQ(irq); + return IRQ_HANDLED; } -void __init init_pciasic(void) -{ - * (volatile u8 *) PCIMT_IRQSEL = - IT_EISA | IT_INTA | IT_INTB | IT_INTC | IT_INTD; -} +struct irqaction sni_isa_irq = { + .handler = sni_isa_irq_handler, + .name = "ISA", + .flags = SA_SHIRQ +}; /* * On systems with i8259-style interrupt controllers we assume for @@ -169,14 +52,31 @@ void __init init_pciasic(void) */ void __init arch_init_irq(void) { - int i; - init_i8259_irqs(); /* Integrated i8259 */ - init_pciasic(); - - /* Actually we've got more interrupts to handle ... */ - for (i = PCIMT_IRQ_INT2; i <= PCIMT_IRQ_ETHERNET; i++) - set_irq_chip(i, &pciasic_irq_type); - - change_c0_status(ST0_IM, IE_IRQ1|IE_IRQ2|IE_IRQ3|IE_IRQ4); + switch (sni_brd_type) { + case SNI_BRD_10: + case SNI_BRD_10NEW: + case SNI_BRD_TOWER_OASIC: + case SNI_BRD_MINITOWER: + sni_a20r_irq_init(); + break; + + case SNI_BRD_PCI_TOWER: + sni_pcit_irq_init(); + break; + + case SNI_BRD_PCI_TOWER_CPLUS: + sni_pcit_cplus_irq_init(); + break; + + case SNI_BRD_RM200: + sni_rm200_irq_init(); + break; + + case SNI_BRD_PCI_MTOWER: + case SNI_BRD_PCI_DESKTOP: + case SNI_BRD_PCI_MTOWER_CPLUS: + sni_pcimt_irq_init(); + break; + } } diff --git a/arch/mips/sni/pcimt.c b/arch/mips/sni/pcimt.c new file mode 100644 index 000000000000..6c0dad7cbf4e --- /dev/null +++ b/arch/mips/sni/pcimt.c @@ -0,0 +1,390 @@ +/* + * PCIMT specific code + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1996, 97, 98, 2000, 03, 04, 06 Ralf Baechle (ralf@linux-mips.org) + * Copyright (C) 2006 Thomas Bogendoerfer (tsbogend@alpha.franken.de) + */ + +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#define cacheconf (*(volatile unsigned int *)PCIMT_CACHECONF) +#define invspace (*(volatile unsigned int *)PCIMT_INVSPACE) + +static void __init sni_pcimt_sc_init(void) +{ + unsigned int scsiz, sc_size; + + scsiz = cacheconf & 7; + if (scsiz == 0) { + printk("Second level cache is deactived.\n"); + return; + } + if (scsiz >= 6) { + printk("Invalid second level cache size configured, " + "deactivating second level cache.\n"); + cacheconf = 0; + return; + } + + sc_size = 128 << scsiz; + printk("%dkb second level cache detected, deactivating.\n", sc_size); + cacheconf = 0; +} + + +/* + * A bit more gossip about the iron we're running on ... + */ +static inline void sni_pcimt_detect(void) +{ + char boardtype[80]; + unsigned char csmsr; + char *p = boardtype; + unsigned int asic; + + csmsr = *(volatile unsigned char *)PCIMT_CSMSR; + + p += sprintf(p, "%s PCI", (csmsr & 0x80) ? "RM200" : "RM300"); + if ((csmsr & 0x80) == 0) + p += sprintf(p, ", board revision %s", + (csmsr & 0x20) ? "D" : "C"); + asic = csmsr & 0x80; + asic = (csmsr & 0x08) ? asic : !asic; + p += sprintf(p, ", ASIC PCI Rev %s", asic ? "1.0" : "1.1"); + printk("%s.\n", boardtype); +} + +#define PORT(_base,_irq) \ + { \ + .iobase = _base, \ + .irq = _irq, \ + .uartclk = 1843200, \ + .iotype = UPIO_PORT, \ + .flags = UPF_BOOT_AUTOCONF, \ + } + +static struct plat_serial8250_port pcimt_data[] = { + PORT(0x3f8, 4), + PORT(0x2f8, 3), + { }, +}; + +static struct platform_device pcimt_serial8250_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = pcimt_data, + }, +}; + +static struct resource sni_io_resource = { + .start = 0x00001000UL, + .end = 0x03bfffffUL, + .name = "PCIMT IO MEM", + .flags = IORESOURCE_IO, +}; + +static struct resource pcimt_io_resources[] = { + { + .start = 0x00, + .end = 0x1f, + .name = "dma1", + .flags = IORESOURCE_BUSY + }, { + .start = 0x40, + .end = 0x5f, + .name = "timer", + .flags = IORESOURCE_BUSY + }, { + .start = 0x60, + .end = 0x6f, + .name = "keyboard", + .flags = IORESOURCE_BUSY + }, { + .start = 0x80, + .end = 0x8f, + .name = "dma page reg", + .flags = IORESOURCE_BUSY + }, { + .start = 0xc0, + .end = 0xdf, + .name = "dma2", + .flags = IORESOURCE_BUSY + }, { + .start = 0xcfc, + .end = 0xcff, + .name = "PCI config data", + .flags = IORESOURCE_BUSY + } +}; + +static struct resource sni_mem_resource = { + .start = 0x10000000UL, + .end = 0xffffffffUL, + .name = "PCIMT PCI MEM", + .flags = IORESOURCE_MEM +}; + +/* + * The RM200/RM300 has a few holes in it's PCI/EISA memory address space used + * for other purposes. Be paranoid and allocate all of the before the PCI + * code gets a chance to to map anything else there ... + * + * This leaves the following areas available: + * + * 0x10000000 - 0x1009ffff (640kB) PCI/EISA/ISA Bus Memory + * 0x10100000 - 0x13ffffff ( 15MB) PCI/EISA/ISA Bus Memory + * 0x18000000 - 0x1fbfffff (124MB) PCI/EISA Bus Memory + * 0x1ff08000 - 0x1ffeffff (816kB) PCI/EISA Bus Memory + * 0xa0000000 - 0xffffffff (1.5GB) PCI/EISA Bus Memory + */ +static struct resource pcimt_mem_resources[] = { + { + .start = 0x100a0000, + .end = 0x100bffff, + .name = "Video RAM area", + .flags = IORESOURCE_BUSY + }, { + .start = 0x100c0000, + .end = 0x100fffff, + .name = "ISA Reserved", + .flags = IORESOURCE_BUSY + }, { + .start = 0x14000000, + .end = 0x17bfffff, + .name = "PCI IO", + .flags = IORESOURCE_BUSY + }, { + .start = 0x17c00000, + .end = 0x17ffffff, + .name = "Cache Replacement Area", + .flags = IORESOURCE_BUSY + }, { + .start = 0x1a000000, + .end = 0x1a000003, + .name = "PCI INT Acknowledge", + .flags = IORESOURCE_BUSY + }, { + .start = 0x1fc00000, + .end = 0x1fc7ffff, + .name = "Boot PROM", + .flags = IORESOURCE_BUSY + }, { + .start = 0x1fc80000, + .end = 0x1fcfffff, + .name = "Diag PROM", + .flags = IORESOURCE_BUSY + }, { + .start = 0x1fd00000, + .end = 0x1fdfffff, + .name = "X-Bus", + .flags = IORESOURCE_BUSY + }, { + .start = 0x1fe00000, + .end = 0x1fefffff, + .name = "BIOS map", + .flags = IORESOURCE_BUSY + }, { + .start = 0x1ff00000, + .end = 0x1ff7ffff, + .name = "NVRAM / EEPROM", + .flags = IORESOURCE_BUSY + }, { + .start = 0x1fff0000, + .end = 0x1fffefff, + .name = "ASIC PCI", + .flags = IORESOURCE_BUSY + }, { + .start = 0x1ffff000, + .end = 0x1fffffff, + .name = "MP Agent", + .flags = IORESOURCE_BUSY + }, { + .start = 0x20000000, + .end = 0x9fffffff, + .name = "Main Memory", + .flags = IORESOURCE_BUSY + } +}; + +static void __init sni_pcimt_resource_init(void) +{ + int i; + + /* request I/O space for devices used on all i[345]86 PCs */ + for (i = 0; i < ARRAY_SIZE(pcimt_io_resources); i++) + request_resource(&ioport_resource, pcimt_io_resources + i); + + /* request mem space for pcimt-specific devices */ + for (i = 0; i < ARRAY_SIZE(pcimt_mem_resources); i++) + request_resource(&sni_mem_resource, pcimt_mem_resources + i); + + ioport_resource.end = sni_io_resource.end; +} + +extern struct pci_ops sni_pcimt_ops; + +static struct pci_controller sni_controller = { + .pci_ops = &sni_pcimt_ops, + .mem_resource = &sni_mem_resource, + .mem_offset = 0x10000000UL, + .io_resource = &sni_io_resource, + .io_offset = 0x00000000UL +}; + +static void enable_pcimt_irq(unsigned int irq) +{ + unsigned int mask = 1 << (irq - PCIMT_IRQ_INT2); + + *(volatile u8 *) PCIMT_IRQSEL |= mask; +} + +void disable_pcimt_irq(unsigned int irq) +{ + unsigned int mask = ~(1 << (irq - PCIMT_IRQ_INT2)); + + *(volatile u8 *) PCIMT_IRQSEL &= mask; +} + +static void end_pcimt_irq(unsigned int irq) +{ + if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) + enable_pcimt_irq(irq); +} + +static struct irq_chip pcimt_irq_type = { + .typename = "PCIMT", + .ack = disable_pcimt_irq, + .mask = disable_pcimt_irq, + .mask_ack = disable_pcimt_irq, + .unmask = enable_pcimt_irq, + .end = end_pcimt_irq, +}; + +/* + * hwint0 should deal with MP agent, ASIC PCI, EISA NMI and debug + * button interrupts. Later ... + */ +static void pcimt_hwint0(void) +{ + panic("Received int0 but no handler yet ..."); +} + +/* + * hwint 1 deals with EISA and SCSI interrupts, + * + * The EISA_INT bit in CSITPEND is high active, all others are low active. + */ +static void pcimt_hwint1(void) +{ + u8 pend = *(volatile char *)PCIMT_CSITPEND; + unsigned long flags; + + if (pend & IT_EISA) { + int irq; + /* + * Note: ASIC PCI's builtin interrupt achknowledge feature is + * broken. Using it may result in loss of some or all i8259 + * interupts, so don't use PCIMT_INT_ACKNOWLEDGE ... + */ + irq = i8259_irq(); + if (unlikely(irq < 0)) + return; + + do_IRQ(irq); + } + + if (!(pend & IT_SCSI)) { + flags = read_c0_status(); + clear_c0_status(ST0_IM); + do_IRQ(PCIMT_IRQ_SCSI); + write_c0_status(flags); + } +} + +/* + * hwint 3 should deal with the PCI A - D interrupts, + */ +static void pcimt_hwint3(void) +{ + u8 pend = *(volatile char *)PCIMT_CSITPEND; + int irq; + + pend &= (IT_INTA | IT_INTB | IT_INTC | IT_INTD); + pend ^= (IT_INTA | IT_INTB | IT_INTC | IT_INTD); + clear_c0_status(IE_IRQ3); + irq = PCIMT_IRQ_INT2 + ffs(pend) - 1; + do_IRQ(irq); + set_c0_status(IE_IRQ3); +} + +static void sni_pcimt_hwint(void) +{ + u32 pending = (read_c0_cause() & read_c0_status()); + + if (pending & C_IRQ5) + do_IRQ (SNI_MIPS_IRQ_CPU_BASE + 7); + else if (pending & C_IRQ4) + do_IRQ (SNI_MIPS_IRQ_CPU_BASE + 6); + else if (pending & C_IRQ3) + pcimt_hwint3(); + else if (pending & C_IRQ1) + pcimt_hwint1(); + else if (pending & C_IRQ0) { + pcimt_hwint0(); + } +} + +void __init sni_pcimt_irq_init(void) +{ + int i; + + *(volatile u8 *) PCIMT_IRQSEL = IT_ETH | IT_EISA; + mips_cpu_irq_init(); + /* Actually we've got more interrupts to handle ... */ + for (i = PCIMT_IRQ_INT2; i <= PCIMT_IRQ_SCSI; i++) + set_irq_chip(i, &pcimt_irq_type); + sni_hwint = sni_pcimt_hwint; + change_c0_status(ST0_IM, IE_IRQ1|IE_IRQ3); +} + +void sni_pcimt_init(void) +{ + sni_pcimt_resource_init(); + sni_pcimt_detect(); + sni_pcimt_sc_init(); + rtc_mips_get_time = mc146818_get_cmos_time; + rtc_mips_set_time = mc146818_set_rtc_mmss; + board_time_init = sni_cpu_time_init; +#ifdef CONFIG_PCI + register_pci_controller(&sni_controller); +#endif +} + +static int __init snirm_pcimt_setup_devinit(void) +{ + switch (sni_brd_type) { + case SNI_BRD_PCI_MTOWER: + case SNI_BRD_PCI_DESKTOP: + case SNI_BRD_PCI_MTOWER_CPLUS: + platform_device_register(&pcimt_serial8250_device); + break; + } + + return 0; +} + +device_initcall(snirm_pcimt_setup_devinit); diff --git a/arch/mips/sni/pcit.c b/arch/mips/sni/pcit.c new file mode 100644 index 000000000000..3921096023c3 --- /dev/null +++ b/arch/mips/sni/pcit.c @@ -0,0 +1,351 @@ +/* + * PCI Tower specific code + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2006 Thomas Bogendoerfer (tsbogend@alpha.franken.de) + */ + +#include +#include +#include +#include + +#include +#include +#include +#include + + +#define PORT(_base,_irq) \ + { \ + .iobase = _base, \ + .irq = _irq, \ + .uartclk = 1843200, \ + .iotype = UPIO_PORT, \ + .flags = UPF_BOOT_AUTOCONF, \ + } + +static struct plat_serial8250_port pcit_data[] = { + PORT(0x3f8, 0), + PORT(0x2f8, 3), + { }, +}; + +static struct platform_device pcit_serial8250_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = pcit_data, + }, +}; + +static struct plat_serial8250_port pcit_cplus_data[] = { + PORT(0x3f8, 4), + PORT(0x2f8, 3), + PORT(0x3e8, 4), + PORT(0x2e8, 3), + { }, +}; + +static struct platform_device pcit_cplus_serial8250_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = pcit_cplus_data, + }, +}; + +static struct resource sni_io_resource = { + .start = 0x00001000UL, + .end = 0x03bfffffUL, + .name = "PCIT IO MEM", + .flags = IORESOURCE_IO, +}; + +static struct resource pcit_io_resources[] = { + { + .start = 0x00, + .end = 0x1f, + .name = "dma1", + .flags = IORESOURCE_BUSY + }, { + .start = 0x40, + .end = 0x5f, + .name = "timer", + .flags = IORESOURCE_BUSY + }, { + .start = 0x60, + .end = 0x6f, + .name = "keyboard", + .flags = IORESOURCE_BUSY + }, { + .start = 0x80, + .end = 0x8f, + .name = "dma page reg", + .flags = IORESOURCE_BUSY + }, { + .start = 0xc0, + .end = 0xdf, + .name = "dma2", + .flags = IORESOURCE_BUSY + }, { + .start = 0xcfc, + .end = 0xcff, + .name = "PCI config data", + .flags = IORESOURCE_BUSY + } +}; + +static struct resource sni_mem_resource = { + .start = 0x10000000UL, + .end = 0xffffffffUL, + .name = "PCIT PCI MEM", + .flags = IORESOURCE_MEM +}; + +/* + * The RM200/RM300 has a few holes in it's PCI/EISA memory address space used + * for other purposes. Be paranoid and allocate all of the before the PCI + * code gets a chance to to map anything else there ... + * + * This leaves the following areas available: + * + * 0x10000000 - 0x1009ffff (640kB) PCI/EISA/ISA Bus Memory + * 0x10100000 - 0x13ffffff ( 15MB) PCI/EISA/ISA Bus Memory + * 0x18000000 - 0x1fbfffff (124MB) PCI/EISA Bus Memory + * 0x1ff08000 - 0x1ffeffff (816kB) PCI/EISA Bus Memory + * 0xa0000000 - 0xffffffff (1.5GB) PCI/EISA Bus Memory + */ +static struct resource pcit_mem_resources[] = { + { + .start = 0x14000000, + .end = 0x17bfffff, + .name = "PCI IO", + .flags = IORESOURCE_BUSY + }, { + .start = 0x17c00000, + .end = 0x17ffffff, + .name = "Cache Replacement Area", + .flags = IORESOURCE_BUSY + }, { + .start = 0x180a0000, + .end = 0x180bffff, + .name = "Video RAM area", + .flags = IORESOURCE_BUSY + }, { + .start = 0x180c0000, + .end = 0x180fffff, + .name = "ISA Reserved", + .flags = IORESOURCE_BUSY + }, { + .start = 0x19000000, + .end = 0x1fbfffff, + .name = "PCI MEM", + .flags = IORESOURCE_BUSY + }, { + .start = 0x1fc00000, + .end = 0x1fc7ffff, + .name = "Boot PROM", + .flags = IORESOURCE_BUSY + }, { + .start = 0x1fc80000, + .end = 0x1fcfffff, + .name = "Diag PROM", + .flags = IORESOURCE_BUSY + }, { + .start = 0x1fd00000, + .end = 0x1fdfffff, + .name = "X-Bus", + .flags = IORESOURCE_BUSY + }, { + .start = 0x1fe00000, + .end = 0x1fefffff, + .name = "BIOS map", + .flags = IORESOURCE_BUSY + }, { + .start = 0x1ff00000, + .end = 0x1ff7ffff, + .name = "NVRAM / EEPROM", + .flags = IORESOURCE_BUSY + }, { + .start = 0x1fff0000, + .end = 0x1fffefff, + .name = "MAUI ASIC", + .flags = IORESOURCE_BUSY + }, { + .start = 0x1ffff000, + .end = 0x1fffffff, + .name = "MP Agent", + .flags = IORESOURCE_BUSY + }, { + .start = 0x20000000, + .end = 0x9fffffff, + .name = "Main Memory", + .flags = IORESOURCE_BUSY + } +}; + +static void __init sni_pcit_resource_init(void) +{ + int i; + + /* request I/O space for devices used on all i[345]86 PCs */ + for (i = 0; i < ARRAY_SIZE(pcit_io_resources); i++) + request_resource(&ioport_resource, pcit_io_resources + i); + + /* request mem space for pcimt-specific devices */ + for (i = 0; i < ARRAY_SIZE(pcit_mem_resources); i++) + request_resource(&sni_mem_resource, pcit_mem_resources + i); + + ioport_resource.end = sni_io_resource.end; +} + + +extern struct pci_ops sni_pcit_ops; + +static struct pci_controller sni_pcit_controller = { + .pci_ops = &sni_pcit_ops, + .mem_resource = &sni_mem_resource, + .mem_offset = 0x10000000UL, + .io_resource = &sni_io_resource, + .io_offset = 0x00000000UL +}; + +static void enable_pcit_irq(unsigned int irq) +{ + u32 mask = 1 << (irq - SNI_PCIT_INT_START + 24); + + *(volatile u32 *)SNI_PCIT_INT_REG |= mask; +} + +void disable_pcit_irq(unsigned int irq) +{ + u32 mask = 1 << (irq - SNI_PCIT_INT_START + 24); + + *(volatile u32 *)SNI_PCIT_INT_REG &= ~mask; +} + +void end_pcit_irq(unsigned int irq) +{ + if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) + enable_pcit_irq(irq); +} + +static struct irq_chip pcit_irq_type = { + .typename = "PCIT", + .ack = disable_pcit_irq, + .mask = disable_pcit_irq, + .mask_ack = disable_pcit_irq, + .unmask = enable_pcit_irq, + .end = end_pcit_irq, +}; + +static void pcit_hwint1(void) +{ + u32 pending = *(volatile u32 *)SNI_PCIT_INT_REG; + int irq; + + clear_c0_status(IE_IRQ1); + irq = ffs((pending >> 16) & 0x7f); + + if (likely(irq > 0)) + do_IRQ (irq + SNI_PCIT_INT_START - 1); + set_c0_status (IE_IRQ1); +} + +static void pcit_hwint0(void) +{ + u32 pending = *(volatile u32 *)SNI_PCIT_INT_REG; + int irq; + + clear_c0_status(IE_IRQ0); + irq = ffs((pending >> 16) & 0x7f); + + if (likely(irq > 0)) + do_IRQ (irq + SNI_PCIT_INT_START - 1); + set_c0_status (IE_IRQ0); +} + +static void sni_pcit_hwint(void) +{ + u32 pending = (read_c0_cause() & read_c0_status()); + + if (pending & C_IRQ1) + pcit_hwint1(); + else if (pending & C_IRQ2) + do_IRQ (SNI_MIPS_IRQ_CPU_BASE + 4); + else if (pending & C_IRQ3) + do_IRQ (SNI_MIPS_IRQ_CPU_BASE + 5); + else if (pending & C_IRQ5) + do_IRQ (SNI_MIPS_IRQ_CPU_BASE + 7); +} + +static void sni_pcit_hwint_cplus(void) +{ + u32 pending = (read_c0_cause() & read_c0_status()); + + if (pending & C_IRQ0) + pcit_hwint0(); + else if (pending & C_IRQ2) + do_IRQ (SNI_MIPS_IRQ_CPU_BASE + 4); + else if (pending & C_IRQ3) + do_IRQ (SNI_MIPS_IRQ_CPU_BASE + 5); + else if (pending & C_IRQ5) + do_IRQ (SNI_MIPS_IRQ_CPU_BASE + 7); +} + +void __init sni_pcit_irq_init(void) +{ + int i; + + mips_cpu_irq_init(); + for (i = SNI_PCIT_INT_START; i <= SNI_PCIT_INT_END; i++) + set_irq_chip(i, &pcit_irq_type); + *(volatile u32 *)SNI_PCIT_INT_REG = 0; + sni_hwint = sni_pcit_hwint; + change_c0_status(ST0_IM, IE_IRQ1); + setup_irq (SNI_PCIT_INT_START + 6, &sni_isa_irq); +} + +void __init sni_pcit_cplus_irq_init(void) +{ + int i; + + mips_cpu_irq_init(); + for (i = SNI_PCIT_INT_START; i <= SNI_PCIT_INT_END; i++) + set_irq_chip(i, &pcit_irq_type); + *(volatile u32 *)SNI_PCIT_INT_REG = 0; + sni_hwint = sni_pcit_hwint_cplus; + change_c0_status(ST0_IM, IE_IRQ0); + setup_irq (SNI_PCIT_INT_START + 6, &sni_isa_irq); +} + +void sni_pcit_init(void) +{ + sni_pcit_resource_init(); + rtc_mips_get_time = mc146818_get_cmos_time; + rtc_mips_set_time = mc146818_set_rtc_mmss; + board_time_init = sni_cpu_time_init; +#ifdef CONFIG_PCI + register_pci_controller(&sni_pcit_controller); +#endif +} + +static int __init snirm_pcit_setup_devinit(void) +{ + switch (sni_brd_type) { + case SNI_BRD_PCI_TOWER: + platform_device_register(&pcit_serial8250_device); + break; + + case SNI_BRD_PCI_TOWER_CPLUS: + platform_device_register(&pcit_cplus_serial8250_device); + break; + } + return 0; +} + +device_initcall(snirm_pcit_setup_devinit); diff --git a/arch/mips/sni/reset.c b/arch/mips/sni/reset.c index be85bec002e1..2eada8aea682 100644 --- a/arch/mips/sni/reset.c +++ b/arch/mips/sni/reset.c @@ -13,12 +13,11 @@ * controller to pulse the reset-line low. We try that for a while, * and if it doesn't work, we do some other stupid things. */ -static inline void -kb_wait(void) +static inline void kb_wait(void) { int i; - for (i=0; i<0x10000; i++) + for (i = 0; i < 0x10000; i++) if ((inb_p(0x64) & 0x02) == 0) break; } @@ -32,9 +31,9 @@ void sni_machine_restart(char *command) We can do that easier ... */ local_irq_disable(); for (;;) { - for (i=0; i<100; i++) { + for (i = 0; i < 100; i++) { kb_wait(); - for(j = 0; j < 100000 ; j++) + for (j = 0; j < 100000 ; j++) /* nothing */; outb_p(0xfe,0x64); /* pulse reset low */ } diff --git a/arch/mips/sni/rm200.c b/arch/mips/sni/rm200.c new file mode 100644 index 000000000000..517dc698c083 --- /dev/null +++ b/arch/mips/sni/rm200.c @@ -0,0 +1,186 @@ +/* + * RM200 specific code + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2006 Thomas Bogendoerfer (tsbogend@alpha.franken.de) + */ + +#include +#include +#include +#include + +#include +#include +#include +#include + +#define PORT(_base,_irq) \ + { \ + .iobase = _base, \ + .irq = _irq, \ + .uartclk = 1843200, \ + .iotype = UPIO_PORT, \ + .flags = UPF_BOOT_AUTOCONF, \ + } + +static struct plat_serial8250_port rm200_data[] = { + PORT(0x3f8, 4), + PORT(0x2f8, 3), + { }, +}; + +static struct platform_device rm200_serial8250_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = rm200_data, + }, +}; + +static struct resource snirm_82596_rm200_rsrc[] = { + { + .start = 0xb8000000, + .end = 0xb80fffff, + .flags = IORESOURCE_MEM + }, + { + .start = 0xbb000000, + .end = 0xbb000004, + .flags = IORESOURCE_MEM + }, + { + .start = 0xbff00000, + .end = 0xbff00020, + .flags = IORESOURCE_MEM + }, + { + .start = 27, + .end = 27, + .flags = IORESOURCE_IRQ + }, + { + .flags = 0x00 + } +}; + +static struct platform_device snirm_82596_rm200_pdev = { + .name = "snirm_82596", + .num_resources = ARRAY_SIZE(snirm_82596_rm200_rsrc), + .resource = snirm_82596_rm200_rsrc +}; + +static struct resource snirm_53c710_rm200_rsrc[] = { + { + .start = 0xb9000000, + .end = 0xb90fffff, + .flags = IORESOURCE_MEM + }, + { + .start = 26, + .end = 26, + .flags = IORESOURCE_IRQ + } +}; + +static struct platform_device snirm_53c710_rm200_pdev = { + .name = "snirm_53c710", + .num_resources = ARRAY_SIZE(snirm_53c710_rm200_rsrc), + .resource = snirm_53c710_rm200_rsrc +}; + +static int __init snirm_setup_devinit(void) +{ + if (sni_brd_type == SNI_BRD_RM200) { + platform_device_register(&rm200_serial8250_device); + platform_device_register(&snirm_82596_rm200_pdev); + platform_device_register(&snirm_53c710_rm200_pdev); + } + return 0; +} + +device_initcall(snirm_setup_devinit); + + +#define SNI_RM200_INT_STAT_REG 0xbc000000 +#define SNI_RM200_INT_ENA_REG 0xbc080000 + +#define SNI_RM200_INT_START 24 +#define SNI_RM200_INT_END 28 + +static void enable_rm200_irq(unsigned int irq) +{ + unsigned int mask = 1 << (irq - SNI_RM200_INT_START); + + *(volatile u8 *)SNI_RM200_INT_ENA_REG &= ~mask; +} + +void disable_rm200_irq(unsigned int irq) +{ + unsigned int mask = 1 << (irq - SNI_RM200_INT_START); + + *(volatile u8 *)SNI_RM200_INT_ENA_REG |= mask; +} + +void end_rm200_irq(unsigned int irq) +{ + if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) + enable_rm200_irq(irq); +} + +static struct irq_chip rm200_irq_type = { + .typename = "RM200", + .ack = disable_rm200_irq, + .mask = disable_rm200_irq, + .mask_ack = disable_rm200_irq, + .unmask = enable_rm200_irq, + .end = end_rm200_irq, +}; + +static void sni_rm200_hwint(void) +{ + u32 pending = read_c0_cause() & read_c0_status(); + u8 mask; + u8 stat; + int irq; + + if (pending & C_IRQ5) + do_IRQ (SNI_MIPS_IRQ_CPU_BASE + 7); + else if (pending & C_IRQ0) { + clear_c0_status (IE_IRQ0); + mask = *(volatile u8 *)SNI_RM200_INT_ENA_REG ^ 0x1f; + stat = *(volatile u8 *)SNI_RM200_INT_STAT_REG ^ 0x14; + irq = ffs(stat & mask & 0x1f); + + if (likely(irq > 0)) + do_IRQ (irq + SNI_RM200_INT_START - 1); + set_c0_status (IE_IRQ0); + } +} + +void __init sni_rm200_irq_init(void) +{ + int i; + + * (volatile u8 *)SNI_RM200_INT_ENA_REG = 0x1f; + + mips_cpu_irq_init(); + /* Actually we've got more interrupts to handle ... */ + for (i = SNI_RM200_INT_START; i <= SNI_RM200_INT_END; i++) + set_irq_chip(i, &rm200_irq_type); + sni_hwint = sni_rm200_hwint; + change_c0_status(ST0_IM, IE_IRQ0); + setup_irq (SNI_RM200_INT_START + 0, &sni_isa_irq); +} + +void sni_rm200_init(void) +{ + set_io_port_base(SNI_PORT_BASE + 0x02000000); + ioport_resource.end += 0x02000000; + ds1216_base = (volatile unsigned char *) SNI_DS1216_RM200_BASE; + rtc_mips_get_time = ds1216_get_cmos_time; + board_time_init = sni_cpu_time_init; +} diff --git a/arch/mips/sni/setup.c b/arch/mips/sni/setup.c index afeb7f13e5b5..68d7cf609b4f 100644 --- a/arch/mips/sni/setup.c +++ b/arch/mips/sni/setup.c @@ -6,16 +6,10 @@ * for more details. * * Copyright (C) 1996, 97, 98, 2000, 03, 04, 06 Ralf Baechle (ralf@linux-mips.org) + * Copyright (C) 2006 Thomas Bogendoerfer (tsbogend@alpha.franken.de) */ #include -#include -#include -#include #include -#include -#include -#include -#include #include #include #include @@ -25,52 +19,16 @@ #include #endif -#include -#include #include -#include -#include -#include #include #include -#include -#include + +unsigned int sni_brd_type; extern void sni_machine_restart(char *command); extern void sni_machine_halt(void); extern void sni_machine_power_off(void); -void __init plat_timer_setup(struct irqaction *irq) -{ - /* set the clock to 100 Hz */ - outb_p(0x34,0x43); /* binary, mode 2, LSB/MSB, ch 0 */ - outb_p(LATCH & 0xff , 0x40); /* LSB */ - outb(LATCH >> 8 , 0x40); /* MSB */ - setup_irq(0, irq); -} - -/* - * A bit more gossip about the iron we're running on ... - */ -static inline void sni_pcimt_detect(void) -{ - char boardtype[80]; - unsigned char csmsr; - char *p = boardtype; - unsigned int asic; - - csmsr = *(volatile unsigned char *)PCIMT_CSMSR; - - p += sprintf(p, "%s PCI", (csmsr & 0x80) ? "RM200" : "RM300"); - if ((csmsr & 0x80) == 0) - p += sprintf(p, ", board revision %s", - (csmsr & 0x20) ? "D" : "C"); - asic = csmsr & 0x80; - asic = (csmsr & 0x08) ? asic : !asic; - p += sprintf(p, ", ASIC PCI Rev %s", asic ? "1.0" : "1.1"); - printk("%s.\n", boardtype); -} - static void __init sni_display_setup(void) { #if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE) && defined(CONFIG_ARC) @@ -90,175 +48,11 @@ static void __init sni_display_setup(void) #endif } -static struct resource sni_io_resource = { - .start = 0x00001000UL, - .end = 0x03bfffffUL, - .name = "PCIMT IO MEM", - .flags = IORESOURCE_IO, -}; - -static struct resource pcimt_io_resources[] = { - { - .start = 0x00, - .end = 0x1f, - .name = "dma1", - .flags = IORESOURCE_BUSY - }, { - .start = 0x40, - .end = 0x5f, - .name = "timer", - .flags = IORESOURCE_BUSY - }, { - .start = 0x60, - .end = 0x6f, - .name = "keyboard", - .flags = IORESOURCE_BUSY - }, { - .start = 0x80, - .end = 0x8f, - .name = "dma page reg", - .flags = IORESOURCE_BUSY - }, { - .start = 0xc0, - .end = 0xdf, - .name = "dma2", - .flags = IORESOURCE_BUSY - }, { - .start = 0xcfc, - .end = 0xcff, - .name = "PCI config data", - .flags = IORESOURCE_BUSY - } -}; - -static struct resource sni_mem_resource = { - .start = 0x10000000UL, - .end = 0xffffffffUL, - .name = "PCIMT PCI MEM", - .flags = IORESOURCE_MEM -}; - -/* - * The RM200/RM300 has a few holes in it's PCI/EISA memory address space used - * for other purposes. Be paranoid and allocate all of the before the PCI - * code gets a chance to to map anything else there ... - * - * This leaves the following areas available: - * - * 0x10000000 - 0x1009ffff (640kB) PCI/EISA/ISA Bus Memory - * 0x10100000 - 0x13ffffff ( 15MB) PCI/EISA/ISA Bus Memory - * 0x18000000 - 0x1fbfffff (124MB) PCI/EISA Bus Memory - * 0x1ff08000 - 0x1ffeffff (816kB) PCI/EISA Bus Memory - * 0xa0000000 - 0xffffffff (1.5GB) PCI/EISA Bus Memory - */ -static struct resource pcimt_mem_resources[] = { - { - .start = 0x100a0000, - .end = 0x100bffff, - .name = "Video RAM area", - .flags = IORESOURCE_BUSY - }, { - .start = 0x100c0000, - .end = 0x100fffff, - .name = "ISA Reserved", - .flags = IORESOURCE_BUSY - }, { - .start = 0x14000000, - .end = 0x17bfffff, - .name = "PCI IO", - .flags = IORESOURCE_BUSY - }, { - .start = 0x17c00000, - .end = 0x17ffffff, - .name = "Cache Replacement Area", - .flags = IORESOURCE_BUSY - }, { - .start = 0x1a000000, - .end = 0x1a000003, - .name = "PCI INT Acknowledge", - .flags = IORESOURCE_BUSY - }, { - .start = 0x1fc00000, - .end = 0x1fc7ffff, - .name = "Boot PROM", - .flags = IORESOURCE_BUSY - }, { - .start = 0x1fc80000, - .end = 0x1fcfffff, - .name = "Diag PROM", - .flags = IORESOURCE_BUSY - }, { - .start = 0x1fd00000, - .end = 0x1fdfffff, - .name = "X-Bus", - .flags = IORESOURCE_BUSY - }, { - .start = 0x1fe00000, - .end = 0x1fefffff, - .name = "BIOS map", - .flags = IORESOURCE_BUSY - }, { - .start = 0x1ff00000, - .end = 0x1ff7ffff, - .name = "NVRAM / EEPROM", - .flags = IORESOURCE_BUSY - }, { - .start = 0x1fff0000, - .end = 0x1fffefff, - .name = "ASIC PCI", - .flags = IORESOURCE_BUSY - }, { - .start = 0x1ffff000, - .end = 0x1fffffff, - .name = "MP Agent", - .flags = IORESOURCE_BUSY - }, { - .start = 0x20000000, - .end = 0x9fffffff, - .name = "Main Memory", - .flags = IORESOURCE_BUSY - } -}; - -static void __init sni_resource_init(void) -{ - int i; - - /* request I/O space for devices used on all i[345]86 PCs */ - for (i = 0; i < ARRAY_SIZE(pcimt_io_resources); i++) - request_resource(&ioport_resource, pcimt_io_resources + i); - - /* request mem space for pcimt-specific devices */ - for (i = 0; i < ARRAY_SIZE(pcimt_mem_resources); i++) - request_resource(&sni_mem_resource, pcimt_mem_resources + i); - - ioport_resource.end = sni_io_resource.end; -} - -extern struct pci_ops sni_pci_ops; - -static struct pci_controller sni_controller = { - .pci_ops = &sni_pci_ops, - .mem_resource = &sni_mem_resource, - .mem_offset = 0x10000000UL, - .io_resource = &sni_io_resource, - .io_offset = 0x00000000UL -}; - -static inline void sni_pcimt_time_init(void) -{ - rtc_mips_get_time = mc146818_get_cmos_time; - rtc_mips_set_time = mc146818_set_rtc_mmss; -} void __init plat_mem_setup(void) { - sni_pcimt_detect(); - sni_pcimt_sc_init(); - sni_pcimt_time_init(); - set_io_port_base(SNI_PORT_BASE); - ioport_resource.end = sni_io_resource.end; +// ioport_resource.end = sni_io_resource.end; /* * Setup (E)ISA I/O memory access stuff @@ -268,15 +62,33 @@ void __init plat_mem_setup(void) EISA_bus = 1; #endif - sni_resource_init(); + switch (sni_brd_type) { + case SNI_BRD_10: + case SNI_BRD_10NEW: + case SNI_BRD_TOWER_OASIC: + case SNI_BRD_MINITOWER: + sni_a20r_init(); + break; + + case SNI_BRD_PCI_TOWER: + case SNI_BRD_PCI_TOWER_CPLUS: + sni_pcit_init(); + break; + + case SNI_BRD_RM200: + sni_rm200_init(); + break; + + case SNI_BRD_PCI_MTOWER: + case SNI_BRD_PCI_DESKTOP: + case SNI_BRD_PCI_MTOWER_CPLUS: + sni_pcimt_init(); + break; + } _machine_restart = sni_machine_restart; _machine_halt = sni_machine_halt; pm_power_off = sni_machine_power_off; sni_display_setup(); - -#ifdef CONFIG_PCI - register_pci_controller(&sni_controller); -#endif } diff --git a/arch/mips/sni/sniprom.c b/arch/mips/sni/sniprom.c index 1213d166f22e..6a44bbf0b732 100644 --- a/arch/mips/sni/sniprom.c +++ b/arch/mips/sni/sniprom.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include @@ -31,7 +32,7 @@ #define PROM_ENTRY(x) (PROM_VEC + (x)) -#undef DEBUG +#define DEBUG #ifdef DEBUG #define DBG_PRINTF(x...) prom_printf(x) #else @@ -93,14 +94,14 @@ static void sni_idprom_dump(void) { int i; - prom_printf("SNI IDProm dump (first 128byte):\n"); - for(i=0;i<128;i++) { + prom_printf("SNI IDProm dump:\n"); + for (i = 0; i < 256; i++) { if (i%16 == 0) prom_printf("%04x ", i); - prom_printf("%02x ", *(unsigned char *) (SNI_IDPROM_BASE+i)); + prom_printf("%02x ", *(unsigned char *) (SNI_IDPROM_BASE + i)); - if (i%16 == 15) + if (i % 16 == 15) prom_printf("\n"); } } @@ -118,7 +119,7 @@ static void sni_mem_init(void ) } memconf[8]; /* MemSIZE from prom in 16MByte chunks */ - memsize=*((unsigned char *) SNI_IDPROM_MEMSIZE) * 16; + memsize = *((unsigned char *) SNI_IDPROM_MEMSIZE) * 16; DBG_PRINTF("IDProm memsize: %lu MByte\n", memsize); @@ -126,26 +127,134 @@ static void sni_mem_init(void ) __prom_get_memconf(&memconf); DBG_PRINTF("prom_get_mem_conf memory configuration:\n"); - for(i=0;i<8 && memconf[i].size;i++) { - prom_printf("Bank%d: %08x @ %08x\n", i, + for (i = 0;i < 8 && memconf[i].size; i++) { + if (sni_brd_type == SNI_BRD_PCI_TOWER || + sni_brd_type == SNI_BRD_PCI_TOWER_CPLUS) { + if (memconf[i].base >= 0x20000000 && + memconf[i].base < 0x30000000) { + memconf[i].base -= 0x20000000; + } + } + DBG_PRINTF("Bank%d: %08x @ %08x\n", i, memconf[i].size, memconf[i].base); add_memory_region(memconf[i].base, memconf[i].size, BOOT_MEM_RAM); } } +static void __init sni_console_setup(void) +{ + char *ctype; + char *cdev; + char *baud; + int port; + static char options[8]; + + cdev = prom_getenv ("console_dev"); + if (strncmp (cdev, "tty", 3) == 0) { + ctype = prom_getenv ("console"); + switch (*ctype) { + default: + case 'l': + port = 0; + baud = prom_getenv("lbaud"); + break; + case 'r': + port = 1; + baud = prom_getenv("rbaud"); + break; + } + if (baud) + strcpy(options, baud); + add_preferred_console("ttyS", port, baud ? options : NULL); + } +} + void __init prom_init(void) { int argc = fw_arg0; char **argv = (void *)fw_arg1; - unsigned int sni_brd_type = *(unsigned char *) SNI_IDPROM_BRDTYPE; int i; + int cputype; - DBG_PRINTF("Found SNI brdtype %02x\n", sni_brd_type); + sni_brd_type = *(unsigned char *)SNI_IDPROM_BRDTYPE; + cputype = *(unsigned char *)SNI_IDPROM_CPUTYPE; + switch (sni_brd_type) { + case SNI_BRD_TOWER_OASIC: + switch (cputype) { + case SNI_CPU_M8030: + systype = "RM400-330"; + break; + case SNI_CPU_M8031: + systype = "RM400-430"; + break; + case SNI_CPU_M8037: + systype = "RM400-530"; + break; + case SNI_CPU_M8034: + systype = "RM400-730"; + break; + default: + systype = "RM400-xxx"; + break; + } + break; + case SNI_BRD_MINITOWER: + switch (cputype) { + case SNI_CPU_M8021: + case SNI_CPU_M8043: + systype = "RM400-120"; + break; + case SNI_CPU_M8040: + systype = "RM400-220"; + break; + case SNI_CPU_M8053: + systype = "RM400-225"; + break; + case SNI_CPU_M8050: + systype = "RM400-420"; + break; + default: + systype = "RM400-xxx"; + break; + } + break; + case SNI_BRD_PCI_TOWER: + systype = "RM400-Cxx"; + break; + case SNI_BRD_RM200: + systype = "RM200-xxx"; + break; + case SNI_BRD_PCI_MTOWER: + systype = "RM300-Cxx"; + break; + case SNI_BRD_PCI_DESKTOP: + switch (read_c0_prid() & 0xff00) { + case PRID_IMP_R4600: + case PRID_IMP_R4700: + systype = "RM200-C20"; + break; + case PRID_IMP_R5000: + systype = "RM200-C40"; + break; + default: + systype = "RM200-Cxx"; + break; + } + break; + case SNI_BRD_PCI_TOWER_CPLUS: + systype = "RM400-Exx"; + break; + case SNI_BRD_PCI_MTOWER_CPLUS: + systype = "RM300-Exx"; + break; + } + DBG_PRINTF("Found SNI brdtype %02x name %s\n", sni_brd_type,systype); #ifdef DEBUG sni_idprom_dump(); #endif sni_mem_init(); + sni_console_setup(); /* copy prom cmdline parameters to kernel cmdline */ for (i = 1; i < argc; i++) { diff --git a/arch/mips/sni/time.c b/arch/mips/sni/time.c new file mode 100644 index 000000000000..20028fc7757e --- /dev/null +++ b/arch/mips/sni/time.c @@ -0,0 +1,148 @@ +#include +#include +#include + +#include +#include + +#define SNI_CLOCK_TICK_RATE 3686400 +#define SNI_COUNTER2_DIV 64 +#define SNI_COUNTER0_DIV ((SNI_CLOCK_TICK_RATE / SNI_COUNTER2_DIV) / HZ) + +static void sni_a20r_timer_ack(void) +{ + *(volatile u8 *)A20R_PT_TIM0_ACK = 0x0; wmb(); +} + +/* + * a20r platform uses 2 counters to divide the input frequency. + * Counter 2 output is connected to Counter 0 & 1 input. + */ +static void __init sni_a20r_timer_setup(struct irqaction *irq) +{ + *(volatile u8 *)(A20R_PT_CLOCK_BASE + 12) = 0x34; wmb(); + *(volatile u8 *)(A20R_PT_CLOCK_BASE + 0) = (SNI_COUNTER0_DIV) & 0xff; wmb(); + *(volatile u8 *)(A20R_PT_CLOCK_BASE + 0) = (SNI_COUNTER0_DIV >> 8) & 0xff; wmb(); + + *(volatile u8 *)(A20R_PT_CLOCK_BASE + 12) = 0xb4; wmb(); + *(volatile u8 *)(A20R_PT_CLOCK_BASE + 8) = (SNI_COUNTER2_DIV) & 0xff; wmb(); + *(volatile u8 *)(A20R_PT_CLOCK_BASE + 8) = (SNI_COUNTER2_DIV >> 8) & 0xff; wmb(); + + setup_irq(SNI_A20R_IRQ_TIMER, irq); + mips_timer_ack = sni_a20r_timer_ack; +} + +#define SNI_8254_TICK_RATE 1193182UL + +#define SNI_8254_TCSAMP_COUNTER ((SNI_8254_TICK_RATE / HZ) + 255) + +static __init unsigned long dosample(void) +{ + u32 ct0, ct1; + volatile u8 msb, lsb; + + /* Start the counter. */ + outb_p (0x34, 0x43); + outb_p(SNI_8254_TCSAMP_COUNTER & 0xff, 0x40); + outb (SNI_8254_TCSAMP_COUNTER >> 8, 0x40); + + /* Get initial counter invariant */ + ct0 = read_c0_count(); + + /* Latch and spin until top byte of counter0 is zero */ + do { + outb (0x00, 0x43); + lsb = inb (0x40); + msb = inb (0x40); + ct1 = read_c0_count(); + } while (msb); + + /* Stop the counter. */ + outb (0x38, 0x43); + /* + * Return the difference, this is how far the r4k counter increments + * for every 1/HZ seconds. We round off the nearest 1 MHz of master + * clock (= 1000000 / HZ / 2). + */ + /*return (ct1 - ct0 + (500000/HZ/2)) / (500000/HZ) * (500000/HZ);*/ + return (ct1 - ct0) / (500000/HZ) * (500000/HZ); +} + +/* + * Here we need to calibrate the cycle counter to at least be close. + */ +__init void sni_cpu_time_init(void) +{ + unsigned long r4k_ticks[3]; + unsigned long r4k_tick; + + /* + * Figure out the r4k offset, the algorithm is very simple and works in + * _all_ cases as long as the 8254 counter register itself works ok (as + * an interrupt driving timer it does not because of bug, this is why + * we are using the onchip r4k counter/compare register to serve this + * purpose, but for r4k_offset calculation it will work ok for us). + * There are other very complicated ways of performing this calculation + * but this one works just fine so I am not going to futz around. ;-) + */ + printk(KERN_INFO "Calibrating system timer... "); + dosample(); /* Prime cache. */ + dosample(); /* Prime cache. */ + /* Zero is NOT an option. */ + do { + r4k_ticks[0] = dosample(); + } while (!r4k_ticks[0]); + do { + r4k_ticks[1] = dosample(); + } while (!r4k_ticks[1]); + + if (r4k_ticks[0] != r4k_ticks[1]) { + printk("warning: timer counts differ, retrying... "); + r4k_ticks[2] = dosample(); + if (r4k_ticks[2] == r4k_ticks[0] + || r4k_ticks[2] == r4k_ticks[1]) + r4k_tick = r4k_ticks[2]; + else { + printk("disagreement, using average... "); + r4k_tick = (r4k_ticks[0] + r4k_ticks[1] + + r4k_ticks[2]) / 3; + } + } else + r4k_tick = r4k_ticks[0]; + + printk("%d [%d.%04d MHz CPU]\n", (int) r4k_tick, + (int) (r4k_tick / (500000 / HZ)), + (int) (r4k_tick % (500000 / HZ))); + + mips_hpt_frequency = r4k_tick * HZ; +} + +/* + * R4k counter based timer interrupt. Works on RM200-225 and possibly + * others but not on RM400 + */ +static void __init sni_cpu_timer_setup(struct irqaction *irq) +{ + setup_irq(SNI_MIPS_IRQ_CPU_TIMER, irq); +} + +void __init plat_timer_setup(struct irqaction *irq) +{ + switch (sni_brd_type) { + case SNI_BRD_10: + case SNI_BRD_10NEW: + case SNI_BRD_TOWER_OASIC: + case SNI_BRD_MINITOWER: + sni_a20r_timer_setup (irq); + break; + + case SNI_BRD_PCI_TOWER: + case SNI_BRD_RM200: + case SNI_BRD_PCI_MTOWER: + case SNI_BRD_PCI_DESKTOP: + case SNI_BRD_PCI_TOWER_CPLUS: + case SNI_BRD_PCI_MTOWER_CPLUS: + sni_cpu_timer_setup (irq); + break; + } +} -- cgit v1.2.3 From 040cf8cfe5f0674ddf256f98366137a7b90d421f Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sun, 18 Feb 2007 00:50:57 +0000 Subject: [MIPS] Update defconfigs Signed-off-by: Ralf Baechle --- arch/mips/configs/atlas_defconfig | 233 +++++++++++++++++------- arch/mips/configs/bigsur_defconfig | 84 +++++++-- arch/mips/configs/capcella_defconfig | 161 ++++++++++++++--- arch/mips/configs/cobalt_defconfig | 129 ++++++++++--- arch/mips/configs/db1000_defconfig | 156 +++++++++++++--- arch/mips/configs/db1100_defconfig | 156 +++++++++++++--- arch/mips/configs/db1200_defconfig | 187 +++++++++++++++---- arch/mips/configs/db1500_defconfig | 195 ++++++++++++++++---- arch/mips/configs/db1550_defconfig | 169 +++++++++++++++--- arch/mips/configs/ddb5477_defconfig | 127 ++++++++++--- arch/mips/configs/decstation_defconfig | 93 +++++++--- arch/mips/configs/e55_defconfig | 91 +++++++--- arch/mips/configs/emma2rh_defconfig | 278 +++++++++++++++++++++++++---- arch/mips/configs/ev64120_defconfig | 125 ++++++++++--- arch/mips/configs/excite_defconfig | 173 ++++++++++++++---- arch/mips/configs/ip22_defconfig | 209 ++++++++++++++++------ arch/mips/configs/ip27_defconfig | 137 +++++++++++--- arch/mips/configs/ip32_defconfig | 145 +++++++++++---- arch/mips/configs/jaguar-atx_defconfig | 104 ++++++++--- arch/mips/configs/jazz_defconfig | 152 +++++++++++----- arch/mips/configs/jmr3927_defconfig | 127 ++++++++++--- arch/mips/configs/lasat200_defconfig | 136 +++++++++++--- arch/mips/configs/malta_defconfig | 172 +++++++++++++----- arch/mips/configs/mipssim_defconfig | 114 +++++++++--- arch/mips/configs/mpc30x_defconfig | 137 +++++++++++--- arch/mips/configs/ocelot_3_defconfig | 192 ++++++++++++++++---- arch/mips/configs/ocelot_c_defconfig | 128 ++++++++++--- arch/mips/configs/ocelot_defconfig | 124 ++++++++++--- arch/mips/configs/ocelot_g_defconfig | 142 +++++++++++---- arch/mips/configs/pb1100_defconfig | 156 +++++++++++++--- arch/mips/configs/pb1500_defconfig | 169 +++++++++++++++--- arch/mips/configs/pb1550_defconfig | 169 +++++++++++++++--- arch/mips/configs/pnx8550-jbs_defconfig | 111 +++++++++--- arch/mips/configs/pnx8550-stb810_defconfig | 81 +++++++-- arch/mips/configs/pnx8550-v2pci_defconfig | 146 ++++++++++++--- arch/mips/configs/qemu_defconfig | 95 +++++++--- arch/mips/configs/rbhma4500_defconfig | 200 +++++++++++++++++---- arch/mips/configs/rm200_defconfig | 263 ++++++++++++++++++++------- arch/mips/configs/sb1250-swarm_defconfig | 123 ++++++++++--- arch/mips/configs/sead_defconfig | 81 ++++++--- arch/mips/configs/tb0226_defconfig | 194 ++++++++++++++++---- arch/mips/configs/tb0229_defconfig | 177 ++++++++++++++---- arch/mips/configs/tb0287_defconfig | 144 ++++++++++++--- arch/mips/configs/workpad_defconfig | 149 +++++++++++++--- arch/mips/configs/wrppmc_defconfig | 152 +++++++++++++--- arch/mips/configs/yosemite_defconfig | 111 +++++++++--- arch/mips/defconfig | 209 ++++++++++++++++------ 47 files changed, 5656 insertions(+), 1450 deletions(-) (limited to 'arch') diff --git a/arch/mips/configs/atlas_defconfig b/arch/mips/configs/atlas_defconfig index ac1891687520..45874d1038d3 100644 --- a/arch/mips/configs/atlas_defconfig +++ b/arch/mips/configs/atlas_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc1 -# Thu Jul 6 09:59:39 2006 +# Linux kernel version: 2.6.20 +# Sun Feb 18 21:27:35 2007 # CONFIG_MIPS=y # # Machine selection # +CONFIG_ZONE_DMA=y # CONFIG_MIPS_MTX1 is not set # CONFIG_MIPS_BOSPORUS is not set # CONFIG_MIPS_PB1000 is not set @@ -25,8 +26,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_IVR is not set -# CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set CONFIG_MIPS_ATLAS=y @@ -42,6 +41,7 @@ CONFIG_MIPS_ATLAS=y # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_V2PCI is not set # CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set # CONFIG_DDB5477 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set @@ -64,10 +64,14 @@ CONFIG_MIPS_ATLAS=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_MIPS_BONITO64=y @@ -129,8 +133,8 @@ CONFIG_BOARD_SCACHE=y CONFIG_RM7000_CPU_SCACHE=y CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set CONFIG_SYS_SUPPORTS_MULTITHREADING=y # CONFIG_64BIT_PHYS_ADDR is not set @@ -149,6 +153,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 # CONFIG_HZ_48 is not set CONFIG_HZ_100=y # CONFIG_HZ_128 is not set @@ -161,6 +166,7 @@ CONFIG_HZ=100 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +# CONFIG_KEXEC is not set CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -179,15 +185,20 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y CONFIG_RELAY=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -195,12 +206,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y -CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -218,6 +229,7 @@ CONFIG_KMOD=y # # Block layer # +CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set @@ -259,6 +271,14 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_TRAD_SIGNALS=y +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set + # # Networking # @@ -273,7 +293,10 @@ CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=m +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y @@ -281,7 +304,6 @@ CONFIG_ASK_IP_FIB_HASH=y # CONFIG_IP_FIB_TRIE is not set CONFIG_IP_FIB_HASH=y CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_FWMARK=y CONFIG_IP_ROUTE_MULTIPATH=y # CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set CONFIG_IP_ROUTE_VERBOSE=y @@ -304,10 +326,13 @@ CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_TCP_MD5SIG=y # # IP: Virtual Server Configuration @@ -349,11 +374,17 @@ CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m +CONFIG_IPV6_MIP6=y CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m CONFIG_INET6_XFRM_MODE_TRANSPORT=m CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_SIT=m CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_MULTIPLE_TABLES=y +CONFIG_IPV6_SUBTREES=y CONFIG_NETWORK_SECMARK=y CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -365,19 +396,43 @@ CONFIG_BRIDGE_NETFILTER=y CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NF_CONNTRACK_ENABLED=m +CONFIG_NF_CONNTRACK_SUPPORT=y +# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CT_ACCT=y +CONFIG_NF_CONNTRACK_MARK=y +CONFIG_NF_CONNTRACK_SECMARK=y +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +CONFIG_NETFILTER_XT_TARGET_DSCP=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NOTRACK=m CONFIG_NETFILTER_XT_TARGET_SECMARK=m CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HELPER=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m @@ -395,60 +450,45 @@ CONFIG_NETFILTER_XT_MATCH_STATE=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m # # IP: Netfilter Configuration # -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_CT_ACCT=y -CONFIG_IP_NF_CONNTRACK_MARK=y -CONFIG_IP_NF_CONNTRACK_SECMARK=y -CONFIG_IP_NF_CONNTRACK_EVENTS=y -CONFIG_IP_NF_CONNTRACK_NETLINK=m -CONFIG_IP_NF_CT_PROTO_SCTP=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -# CONFIG_IP_NF_NETBIOS_NS is not set -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m -CONFIG_IP_NF_PPTP=m -CONFIG_IP_NF_H323=m -CONFIG_IP_NF_SIP=m +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_IPRANGE=m CONFIG_IP_NF_MATCH_TOS=m CONFIG_IP_NF_MATCH_RECENT=m CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_MATCH_OWNER=m CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_SAME=m -# CONFIG_IP_NF_NAT_SNMP_BASIC is not set -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_NAT_PPTP=m -CONFIG_IP_NF_NAT_H323=m -CONFIG_IP_NF_NAT_SIP=m +CONFIG_NF_NAT_SNMP_BASIC=m +CONFIG_NF_NAT_PROTO_GRE=m +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +CONFIG_NF_NAT_TFTP=m +CONFIG_NF_NAT_AMANDA=m +CONFIG_NF_NAT_PPTP=m +CONFIG_NF_NAT_H323=m +CONFIG_NF_NAT_SIP=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m CONFIG_IP_NF_TARGET_TTL=m # CONFIG_IP_NF_TARGET_CLUSTERIP is not set CONFIG_IP_NF_RAW=m @@ -459,6 +499,7 @@ CONFIG_IP_NF_ARP_MANGLE=m # # IPv6: Netfilter Configuration (EXPERIMENTAL) # +CONFIG_NF_CONNTRACK_IPV6=m CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_RT=m @@ -468,6 +509,7 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_OWNER=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_LOG=m @@ -527,13 +569,12 @@ CONFIG_LLC=m # CONFIG_LLC2 is not set # CONFIG_IPX is not set CONFIG_ATALK=m -CONFIG_DEV_APPLETALK=y +CONFIG_DEV_APPLETALK=m CONFIG_IPDDP=m CONFIG_IPDDP_ENCAP=y CONFIG_IPDDP_DECAP=y # CONFIG_X25 is not set # CONFIG_LAPB is not set -CONFIG_NET_DIVERT=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -541,6 +582,7 @@ CONFIG_NET_DIVERT=y # QoS and/or fair queueing # CONFIG_NET_SCHED=y +CONFIG_NET_SCH_FIFO=y CONFIG_NET_SCH_CLK_JIFFIES=y # CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set # CONFIG_NET_SCH_CLK_CPU is not set @@ -595,6 +637,7 @@ CONFIG_IEEE80211_CRYPT_CCMP=m CONFIG_IEEE80211_SOFTMAC=m # CONFIG_IEEE80211_SOFTMAC_DEBUG is not set CONFIG_WIRELESS_EXT=y +CONFIG_FIB_RULES=y # # Device Drivers @@ -642,16 +685,24 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m +# +# Misc devices +# +CONFIG_SGI_IOC4=m +# CONFIG_TIFM_CORE is not set + # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # @@ -681,6 +732,8 @@ CONFIG_IDE_GENERIC=y # CONFIG_RAID_ATTRS=m CONFIG_SCSI=y +CONFIG_SCSI_TGT=m +CONFIG_SCSI_NETLINK=y CONFIG_SCSI_PROC_FS=y # @@ -700,14 +753,17 @@ CONFIG_CHR_DEV_SCH=m CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y +CONFIG_SCSI_SCAN_ASYNC=y # -# SCSI Transport Attributes +# SCSI Transports # CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_FC_ATTRS=y CONFIG_SCSI_ISCSI_ATTRS=m CONFIG_SCSI_SAS_ATTRS=m +CONFIG_SCSI_SAS_LIBSAS=m +CONFIG_SCSI_SAS_LIBSAS_DEBUG=y # # SCSI low-level drivers @@ -720,30 +776,39 @@ CONFIG_ISCSI_TCP=m # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set +CONFIG_SCSI_AIC94XX=m +# CONFIG_AIC94XX_DEBUG is not set # CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_SATA is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set CONFIG_SCSI_SYM53C8XX_2=y CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 CONFIG_SCSI_SYM53C8XX_MMIO=y -# CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set # # Multi-device support (RAID and LVM) @@ -759,6 +824,7 @@ CONFIG_MD_RAID5_RESHAPE=y CONFIG_MD_MULTIPATH=m CONFIG_MD_FAULTY=m CONFIG_BLK_DEV_DM=m +# CONFIG_DM_DEBUG is not set CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m @@ -813,6 +879,8 @@ CONFIG_LXT_PHY=m CONFIG_CICADA_PHY=m CONFIG_VITESSE_PHY=m CONFIG_SMSC_PHY=m +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set # # Ethernet (10 or 100Mbit) @@ -832,6 +900,7 @@ CONFIG_MII=y # CONFIG_HP100 is not set CONFIG_NET_PCI=y CONFIG_PCNET32=y +# CONFIG_PCNET32_NAPI is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set @@ -850,6 +919,7 @@ CONFIG_PCNET32=y # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set CONFIG_LAN_SAA9730=y +# CONFIG_SC92031 is not set # # Ethernet (1000 Mbit) @@ -868,14 +938,18 @@ CONFIG_LAN_SAA9730=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_QLA3XXX=m +# CONFIG_ATL1 is not set # # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3=m # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set +CONFIG_NETXEN_NIC=m # # Token Ring devices @@ -915,6 +989,7 @@ CONFIG_LAN_SAA9730=y # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces @@ -995,10 +1070,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set @@ -1006,7 +1077,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -1030,15 +1100,10 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HWMON is not set # CONFIG_HWMON_VID is not set -# -# Misc devices -# - # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -1056,12 +1121,19 @@ CONFIG_VIDEO_V4L2=y # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set +# +# HID Devices +# +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + # # USB support # @@ -1124,6 +1196,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y # DMA Devices # +# +# Auxiliary Display support +# + +# +# Virtualization +# + # # File systems # @@ -1134,6 +1214,7 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y @@ -1154,6 +1235,7 @@ CONFIG_XFS_QUOTA=y CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y # CONFIG_XFS_RT is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_MINIX_FS=m CONFIG_ROMFS_FS=m @@ -1167,6 +1249,7 @@ CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=y # CONFIG_AUTOFS4_FS is not set CONFIG_FUSE_FS=m +CONFIG_GENERIC_ACL=y # # CD-ROM/DVD Filesystems @@ -1174,7 +1257,6 @@ CONFIG_FUSE_FS=m CONFIG_ISO9660_FS=m CONFIG_JOLIET=y CONFIG_ZISOFS=y -CONFIG_ZISOFS_FS=m CONFIG_UDF_FS=m CONFIG_UDF_NLS=y @@ -1193,11 +1275,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set +CONFIG_CONFIGFS_FS=m # # Miscellaneous filesystems @@ -1242,7 +1326,6 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set -# CONFIG_CIFS_DEBUG2 is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -1298,6 +1381,14 @@ CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m +# +# Distributed Lock Manager +# +CONFIG_DLM=m +CONFIG_DLM_TCP=y +# CONFIG_DLM_SCTP is not set +# CONFIG_DLM_DEBUG is not set + # # Profiling support # @@ -1308,11 +1399,13 @@ CONFIG_NLS_UTF8=m # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" @@ -1326,18 +1419,30 @@ CONFIG_CMDLINE="" # Cryptographic options # CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_CAST5=m @@ -1349,6 +1454,7 @@ CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_CAMELLIA=m # CONFIG_CRYPTO_TEST is not set # @@ -1358,6 +1464,7 @@ CONFIG_CRYPTO_CRC32C=m # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set CONFIG_CRC16=m CONFIG_CRC32=y @@ -1369,9 +1476,5 @@ CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m CONFIG_PLIST=y -CONFIG_RIO=n -CONFIG_I2C_OCORES=n -CONFIG_DEBUG_RT_MUTEXES=n -CONFIG_RT_MUTEX_TESTER=n -CONFIG_DEBUG_RWSEMS=n -CONFIG_DEBUG_LOCKING_API_SELFTESTS=n +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig index 9554257c6f3a..b4cdd3e7cdfc 100644 --- a/arch/mips/configs/bigsur_defconfig +++ b/arch/mips/configs/bigsur_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.19-rc1 -# Wed Oct 11 01:41:41 2006 +# Linux kernel version: 2.6.20 +# Sun Feb 18 21:27:35 2007 # CONFIG_MIPS=y # # Machine selection # +CONFIG_ZONE_DMA=y # CONFIG_MIPS_MTX1 is not set # CONFIG_MIPS_BOSPORUS is not set # CONFIG_MIPS_PB1000 is not set @@ -40,6 +41,7 @@ CONFIG_MIPS=y # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_V2PCI is not set # CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set # CONFIG_DDB5477 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set @@ -78,11 +80,14 @@ CONFIG_SIBYTE_CFE=y # CONFIG_SIBYTE_SB1250_PROF is not set # CONFIG_SIBYTE_TBPROF is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set CONFIG_DMA_COHERENT=y CONFIG_CPU_BIG_ENDIAN=y # CONFIG_CPU_LITTLE_ENDIAN is not set @@ -115,6 +120,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # CONFIG_CPU_RM9000 is not set CONFIG_CPU_SB1=y CONFIG_SYS_HAS_CPU_SB1=y +CONFIG_WEAK_ORDERING=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y @@ -150,8 +156,10 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y +CONFIG_ZONE_DMA_FLAG=1 CONFIG_SMP=y CONFIG_SYS_SUPPORTS_SMP=y +CONFIG_NR_CPUS_DEFAULT_4=y CONFIG_NR_CPUS=4 # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set @@ -166,6 +174,7 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set # CONFIG_PREEMPT_BKL is not set +# CONFIG_KEXEC is not set CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -185,6 +194,7 @@ CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set @@ -193,6 +203,7 @@ CONFIG_SYSVIPC=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set +CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -253,7 +264,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_HW_HAS_PCI=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y -# CONFIG_PCI_MULTITHREAD_PROBE is not set CONFIG_PCI_DEBUG=y CONFIG_MMU=y @@ -273,10 +283,19 @@ CONFIG_BINFMT_ELF=y # CONFIG_BUILD_ELF64 is not set CONFIG_MIPS32_COMPAT=y CONFIG_COMPAT=y +CONFIG_SYSVIPC_COMPAT=y CONFIG_MIPS32_O32=y CONFIG_MIPS32_N32=y CONFIG_BINFMT_ELF32=y +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set + # # Networking # @@ -292,7 +311,9 @@ CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set @@ -318,6 +339,7 @@ CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_TCP_MD5SIG=y # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set @@ -374,6 +396,7 @@ CONFIG_NETWORK_SECMARK=y CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # @@ -412,6 +435,12 @@ CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# +# Misc devices +# +CONFIG_SGI_IOC4=m +# CONFIG_TIFM_CORE is not set + # # ATA/ATAPI/MFM/RLL support # @@ -455,6 +484,7 @@ CONFIG_BLK_DEV_CMD64X=y # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +CONFIG_BLK_DEV_IT8213=m # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set @@ -464,6 +494,7 @@ CONFIG_BLK_DEV_CMD64X=y # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set +CONFIG_BLK_DEV_TC86C001=m # CONFIG_BLK_DEV_IDE_SWARM is not set # CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y @@ -563,9 +594,11 @@ CONFIG_NET_SB1250_MAC=y # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3=m # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set +CONFIG_NETXEN_NIC=m # # Token Ring devices @@ -627,6 +660,7 @@ CONFIG_SERIAL_NONSTANDARD=y # CONFIG_DIGIEPCA is not set # CONFIG_MOXA_INTELLIO is not set # CONFIG_MOXA_SMARTIO is not set +CONFIG_MOXA_SMARTIO_NEW=m # CONFIG_ISI is not set # CONFIG_SYNCLINKMP is not set # CONFIG_SYNCLINK_GT is not set @@ -667,10 +701,6 @@ CONFIG_GEN_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set @@ -678,7 +708,6 @@ CONFIG_GEN_RTC=y # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -707,6 +736,7 @@ CONFIG_I2C_CHARDEV=y # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PASEMI is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set CONFIG_I2C_SIBYTE=y @@ -743,6 +773,7 @@ CONFIG_I2C_DEBUG_CHIP=y # # Dallas's 1-wire bus # +# CONFIG_W1 is not set # # Hardware Monitoring support @@ -750,11 +781,6 @@ CONFIG_I2C_DEBUG_CHIP=y # CONFIG_HWMON is not set # CONFIG_HWMON_VID is not set -# -# Misc devices -# -# CONFIG_TIFM_CORE is not set - # # Multimedia devices # @@ -839,6 +865,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y # DMA Devices # +# +# Auxiliary Display support +# + +# +# Virtualization +# + # # File systems # @@ -848,6 +882,7 @@ CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set @@ -889,7 +924,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set +CONFIG_CONFIGFS_FS=m # # Miscellaneous filesystems @@ -946,6 +981,10 @@ CONFIG_MSDOS_PARTITION=y # # Distributed Lock Manager # +CONFIG_DLM=m +CONFIG_DLM_TCP=y +# CONFIG_DLM_SCTP is not set +# CONFIG_DLM_DEBUG is not set # # Profiling support @@ -960,23 +999,25 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set CONFIG_LOG_BUF_SHIFT=16 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set CONFIG_DEBUG_MUTEXES=y -# CONFIG_DEBUG_RWSEMS is not set # CONFIG_DEBUG_LOCK_ALLOC is not set # CONFIG_PROVE_LOCKING is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set CONFIG_FORCED_INLINING=y @@ -1002,8 +1043,9 @@ CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=m CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_NULL=y CONFIG_CRYPTO_MD4=y CONFIG_CRYPTO_MD5=y @@ -1012,9 +1054,13 @@ CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_BLOWFISH=y CONFIG_CRYPTO_TWOFISH=y CONFIG_CRYPTO_TWOFISH_COMMON=y @@ -1029,6 +1075,7 @@ CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_DEFLATE=y CONFIG_CRYPTO_MICHAEL_MIC=y # CONFIG_CRYPTO_CRC32C is not set +CONFIG_CRYPTO_CAMELLIA=m # CONFIG_CRYPTO_TEST is not set # @@ -1038,6 +1085,7 @@ CONFIG_CRYPTO_MICHAEL_MIC=y # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC32=y @@ -1045,3 +1093,5 @@ CONFIG_CRC32=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/capcella_defconfig b/arch/mips/configs/capcella_defconfig index 49590d443712..b05469e0bcd0 100644 --- a/arch/mips/configs/capcella_defconfig +++ b/arch/mips/configs/capcella_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc1 -# Thu Jul 6 10:03:24 2006 +# Linux kernel version: 2.6.20 +# Sun Feb 18 21:27:36 2007 # CONFIG_MIPS=y # # Machine selection # +CONFIG_ZONE_DMA=y # CONFIG_MIPS_MTX1 is not set # CONFIG_MIPS_BOSPORUS is not set # CONFIG_MIPS_PB1000 is not set @@ -25,8 +26,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_IVR is not set -# CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set @@ -42,6 +41,7 @@ CONFIG_MIPS=y # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_V2PCI is not set # CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set # CONFIG_DDB5477 is not set CONFIG_MACH_VR41XX=y # CONFIG_PMC_YOSEMITE is not set @@ -70,12 +70,15 @@ CONFIG_MACH_VR41XX=y # CONFIG_VICTOR_MPC30X is not set CONFIG_ZAO_CAPCELLA=y CONFIG_PCI_VR41XX=y -# CONFIG_VRC4173 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y # CONFIG_CPU_BIG_ENDIAN is not set @@ -108,6 +111,7 @@ CONFIG_CPU_VR41XX=y # CONFIG_CPU_SB1 is not set CONFIG_SYS_HAS_CPU_VR41XX=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y @@ -121,8 +125,8 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y @@ -137,6 +141,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -149,6 +154,7 @@ CONFIG_HZ=1000 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +# CONFIG_KEXEC is not set CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -167,15 +173,20 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -183,12 +194,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y -CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -206,6 +217,7 @@ CONFIG_KMOD=y # # Block layer # +CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set @@ -247,6 +259,14 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_TRAD_SIGNALS=y +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set + # # Networking # @@ -261,7 +281,10 @@ CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=m +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set @@ -282,10 +305,13 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_TCP_MD5SIG=y # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set @@ -315,7 +341,6 @@ CONFIG_NETWORK_SECMARK=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -378,14 +403,22 @@ CONFIG_CONNECTOR=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# +# Misc devices +# +CONFIG_SGI_IOC4=m +# CONFIG_TIFM_CORE is not set + # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # @@ -414,6 +447,12 @@ CONFIG_IDE_GENERIC=y # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set # # Multi-device support (RAID and LVM) @@ -464,6 +503,8 @@ CONFIG_LXT_PHY=m CONFIG_CICADA_PHY=m CONFIG_VITESSE_PHY=m CONFIG_SMSC_PHY=m +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set # # Ethernet (10 or 100Mbit) @@ -504,7 +545,7 @@ CONFIG_8139TOO_PIO=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set -# CONFIG_LAN_SAA9730 is not set +# CONFIG_SC92031 is not set # # Ethernet (1000 Mbit) @@ -523,14 +564,18 @@ CONFIG_8139TOO_PIO=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_QLA3XXX=m +# CONFIG_ATL1 is not set # # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3=m # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set +CONFIG_NETXEN_NIC=m # # Token Ring devices @@ -569,6 +614,7 @@ CONFIG_8139TOO_PIO=y # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces @@ -635,10 +681,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_DRM is not set CONFIG_GPIO_VR41XX=y # CONFIG_RAW_DRIVER is not set @@ -647,7 +689,6 @@ CONFIG_GPIO_VR41XX=y # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -671,15 +712,10 @@ CONFIG_GPIO_VR41XX=y # CONFIG_HWMON is not set # CONFIG_HWMON_VID is not set -# -# Misc devices -# - # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -697,12 +733,18 @@ CONFIG_VIDEO_V4L2=y # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set +# +# HID Devices +# +# CONFIG_HID is not set + # # USB support # @@ -754,6 +796,7 @@ CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set # # RTC interfaces @@ -786,6 +829,14 @@ CONFIG_RTC_DRV_VR41XX=y # DMA Devices # +# +# Auxiliary Display support +# + +# +# Virtualization +# + # # File systems # @@ -793,10 +844,12 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set +CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -807,6 +860,7 @@ CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y CONFIG_FUSE_FS=m +CONFIG_GENERIC_ACL=y # # CD-ROM/DVD Filesystems @@ -826,11 +880,13 @@ CONFIG_FUSE_FS=m # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set +CONFIG_CONFIGFS_FS=m # # Miscellaneous filesystems @@ -868,7 +924,6 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set -# CONFIG_CIFS_DEBUG2 is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -885,6 +940,14 @@ CONFIG_MSDOS_PARTITION=y # # CONFIG_NLS is not set +# +# Distributed Lock Manager +# +CONFIG_DLM=m +CONFIG_DLM_TCP=y +# CONFIG_DLM_SCTP is not set +# CONFIG_DLM_DEBUG is not set + # # Profiling support # @@ -895,11 +958,13 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="mem=32M console=ttyVR0,38400" @@ -912,7 +977,44 @@ CONFIG_CMDLINE="mem=32M console=ttyVR0,38400" # # Cryptographic options # -# CONFIG_CRYPTO is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_HMAC=m +CONFIG_CRYPTO_XCBC=m +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_MICHAEL_MIC=m +# CONFIG_CRYPTO_CRC32C is not set +CONFIG_CRYPTO_CAMELLIA=m +# CONFIG_CRYPTO_TEST is not set # # Hardware crypto devices @@ -921,8 +1023,13 @@ CONFIG_CMDLINE="mem=32M console=ttyVR0,38400" # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_DEFLATE=m CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/cobalt_defconfig b/arch/mips/configs/cobalt_defconfig index 0607fc239087..1a3d776ad1e4 100644 --- a/arch/mips/configs/cobalt_defconfig +++ b/arch/mips/configs/cobalt_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc1 -# Thu Jul 6 10:03:25 2006 +# Linux kernel version: 2.6.20 +# Sun Feb 18 21:27:37 2007 # CONFIG_MIPS=y # # Machine selection # +CONFIG_ZONE_DMA=y # CONFIG_MIPS_MTX1 is not set # CONFIG_MIPS_BOSPORUS is not set # CONFIG_MIPS_PB1000 is not set @@ -25,8 +26,6 @@ CONFIG_MIPS=y CONFIG_MIPS_COBALT=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_IVR is not set -# CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set @@ -42,6 +41,7 @@ CONFIG_MIPS_COBALT=y # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_V2PCI is not set # CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set # CONFIG_DDB5477 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set @@ -65,10 +65,14 @@ CONFIG_MIPS_COBALT=y # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_EARLY_PRINTK=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_I8259=y @@ -117,8 +121,8 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y @@ -134,6 +138,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -146,6 +151,7 @@ CONFIG_HZ=1000 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +# CONFIG_KEXEC is not set CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -164,15 +170,20 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y CONFIG_RELAY=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -180,12 +191,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y -CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -198,6 +209,7 @@ CONFIG_BASE_SMALL=0 # # Block layer # +CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set @@ -239,6 +251,14 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_TRAD_SIGNALS=y +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set + # # Networking # @@ -253,7 +273,10 @@ CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=y +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set @@ -270,10 +293,13 @@ CONFIG_IP_FIB_HASH=y # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_TCP_MD5SIG=y # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set @@ -303,7 +329,6 @@ CONFIG_NETWORK_SECMARK=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -378,10 +403,17 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=y +# +# Misc devices +# +CONFIG_SGI_IOC4=y +# CONFIG_TIFM_CORE is not set + # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # @@ -417,8 +449,10 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +CONFIG_BLK_DEV_IT8213=y # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set @@ -428,6 +462,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set CONFIG_BLK_DEV_VIA82CXXX=y +CONFIG_BLK_DEV_TC86C001=y # CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set @@ -439,6 +474,12 @@ CONFIG_BLK_DEV_IDEDMA=y # CONFIG_RAID_ATTRS=y # CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set # # Multi-device support (RAID and LVM) @@ -489,6 +530,8 @@ CONFIG_LXT_PHY=y CONFIG_CICADA_PHY=y CONFIG_VITESSE_PHY=y CONFIG_SMSC_PHY=y +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set # # Ethernet (10 or 100Mbit) @@ -533,14 +576,17 @@ CONFIG_TULIP=y # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_QLA3XXX=y # # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3=y # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set +CONFIG_NETXEN_NIC=y # # Token Ring devices @@ -579,6 +625,7 @@ CONFIG_TULIP=y # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces @@ -656,10 +703,6 @@ CONFIG_COBALT_LCD=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set @@ -667,7 +710,6 @@ CONFIG_COBALT_LCD=y # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -691,15 +733,10 @@ CONFIG_COBALT_LCD=y # CONFIG_HWMON is not set # CONFIG_HWMON_VID is not set -# -# Misc devices -# - # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -717,12 +754,18 @@ CONFIG_VIDEO_V4L2=y # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set +# +# HID Devices +# +# CONFIG_HID is not set + # # USB support # @@ -785,6 +828,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y # DMA Devices # +# +# Auxiliary Display support +# + +# +# Virtualization +# + # # File systems # @@ -794,11 +845,13 @@ CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -809,6 +862,7 @@ CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set CONFIG_FUSE_FS=y +CONFIG_GENERIC_ACL=y # # CD-ROM/DVD Filesystems @@ -828,17 +882,20 @@ CONFIG_FUSE_FS=y # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set +CONFIG_CONFIGFS_FS=y # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set @@ -866,7 +923,6 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set -# CONFIG_CIFS_DEBUG2 is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -883,6 +939,14 @@ CONFIG_MSDOS_PARTITION=y # # CONFIG_NLS is not set +# +# Distributed Lock Manager +# +CONFIG_DLM=y +CONFIG_DLM_TCP=y +# CONFIG_DLM_SCTP is not set +# CONFIG_DLM_DEBUG is not set + # # Profiling support # @@ -893,12 +957,13 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_FS is not set -# CONFIG_UNWIND_INFO is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" @@ -913,7 +978,12 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y # Cryptographic options # CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=y CONFIG_CRYPTO_NULL=y CONFIG_CRYPTO_MD4=y CONFIG_CRYPTO_MD5=y @@ -922,9 +992,16 @@ CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y CONFIG_CRYPTO_WP512=y CONFIG_CRYPTO_TGR192=y +CONFIG_CRYPTO_GF128MUL=y +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=y +CONFIG_CRYPTO_LRW=y CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_FCRYPT=y CONFIG_CRYPTO_BLOWFISH=y CONFIG_CRYPTO_TWOFISH=y +CONFIG_CRYPTO_TWOFISH_COMMON=y CONFIG_CRYPTO_SERPENT=y CONFIG_CRYPTO_AES=y CONFIG_CRYPTO_CAST5=y @@ -936,6 +1013,7 @@ CONFIG_CRYPTO_ANUBIS=y CONFIG_CRYPTO_DEFLATE=y CONFIG_CRYPTO_MICHAEL_MIC=y CONFIG_CRYPTO_CRC32C=y +CONFIG_CRYPTO_CAMELLIA=y # # Hardware crypto devices @@ -944,6 +1022,7 @@ CONFIG_CRYPTO_CRC32C=y # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set CONFIG_CRC16=y CONFIG_CRC32=y @@ -951,3 +1030,5 @@ CONFIG_LIBCRC32C=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig index 1a57b3375483..1db19f1bfd4d 100644 --- a/arch/mips/configs/db1000_defconfig +++ b/arch/mips/configs/db1000_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc1 -# Thu Jul 6 10:03:33 2006 +# Linux kernel version: 2.6.20 +# Sun Feb 18 21:27:39 2007 # CONFIG_MIPS=y # # Machine selection # +CONFIG_ZONE_DMA=y # CONFIG_MIPS_MTX1 is not set # CONFIG_MIPS_BOSPORUS is not set # CONFIG_MIPS_PB1000 is not set @@ -25,8 +26,6 @@ CONFIG_MIPS_DB1000=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_IVR is not set -# CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set @@ -42,6 +41,7 @@ CONFIG_MIPS_DB1000=y # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_V2PCI is not set # CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set # CONFIG_DDB5477 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set @@ -64,14 +64,19 @@ CONFIG_MIPS_DB1000=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y # CONFIG_CPU_BIG_ENDIAN is not set CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y CONFIG_SOC_AU1000=y CONFIG_SOC_AU1X00=y @@ -116,8 +121,8 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_64KB is not set CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set CONFIG_64BIT_PHYS_ADDR=y CONFIG_CPU_HAS_LLSC=y @@ -135,6 +140,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -147,6 +153,7 @@ CONFIG_HZ=1000 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +# CONFIG_KEXEC is not set CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -165,15 +172,20 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y CONFIG_RELAY=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -181,12 +193,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y -CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -204,6 +216,7 @@ CONFIG_KMOD=y # # Block layer # +CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set @@ -252,6 +265,10 @@ CONFIG_PCMCIA_IOCTL=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_TRAD_SIGNALS=y + +# +# Power management options +# # CONFIG_PM is not set # @@ -268,7 +285,10 @@ CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=m +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set @@ -289,10 +309,13 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_TCP_MD5SIG=y # # IP: Virtual Server Configuration @@ -311,15 +334,42 @@ CONFIG_NETFILTER=y CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m -# CONFIG_NF_CONNTRACK is not set +CONFIG_NF_CONNTRACK_ENABLED=m +CONFIG_NF_CONNTRACK_SUPPORT=y +# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CT_ACCT=y +CONFIG_NF_CONNTRACK_MARK=y +CONFIG_NF_CONNTRACK_SECMARK=y +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_SECMARK=m +CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m @@ -330,14 +380,17 @@ CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_QUOTA=m CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STATE=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m # # IP: Netfilter Configuration # -# CONFIG_IP_NF_CONNTRACK is not set +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -365,7 +418,6 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -421,11 +473,13 @@ CONFIG_MTD_PARTITIONS=y # User Modules And Translation Layers # CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set # # RAM/ROM/Flash chip drivers @@ -509,6 +563,10 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m +# +# Misc devices +# + # # ATA/ATAPI/MFM/RLL support # @@ -519,6 +577,12 @@ CONFIG_ATA_OVER_ETH=m # CONFIG_RAID_ATTRS=m # CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set # # Multi-device support (RAID and LVM) @@ -562,6 +626,8 @@ CONFIG_LXT_PHY=m CONFIG_CICADA_PHY=m CONFIG_VITESSE_PHY=m CONFIG_SMSC_PHY=m +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set # # Ethernet (10 or 100Mbit) @@ -616,6 +682,7 @@ CONFIG_PPP_DEFLATE=m CONFIG_PPP_MPPE=m CONFIG_PPPOE=m # CONFIG_SLIP is not set +CONFIG_SLHC=m # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set @@ -635,6 +702,7 @@ CONFIG_PPPOE=m # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces @@ -713,10 +781,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_DTLK is not set # CONFIG_R3964 is not set -# -# Ftape, the floppy tape device driver -# - # # PCMCIA character devices # @@ -729,7 +793,6 @@ CONFIG_SYNCLINK_CS=m # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -753,15 +816,10 @@ CONFIG_SYNCLINK_CS=m # CONFIG_HWMON is not set # CONFIG_HWMON_VID is not set -# -# Misc devices -# - # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -779,12 +837,18 @@ CONFIG_VIDEO_V4L2=y # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set +# +# HID Devices +# +# CONFIG_HID is not set + # # USB support # @@ -846,6 +910,14 @@ CONFIG_USB_ARCH_HAS_OHCI=y # DMA Devices # +# +# Auxiliary Display support +# + +# +# Virtualization +# + # # File systems # @@ -858,6 +930,7 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y +# CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y @@ -870,6 +943,7 @@ CONFIG_REISERFS_FS_SECURITY=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -880,6 +954,7 @@ CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_GENERIC_ACL=y # # CD-ROM/DVD Filesystems @@ -899,23 +974,25 @@ CONFIG_FUSE_FS=m # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set +CONFIG_CONFIGFS_FS=m # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set # CONFIG_JFFS2_FS is not set CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set @@ -944,7 +1021,6 @@ CONFIG_SUNRPC=y CONFIG_SMB_FS=m # CONFIG_SMB_NLS_DEFAULT is not set # CONFIG_CIFS is not set -# CONFIG_CIFS_DEBUG2 is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -1000,6 +1076,14 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set +# +# Distributed Lock Manager +# +CONFIG_DLM=m +CONFIG_DLM_TCP=y +# CONFIG_DLM_SCTP is not set +# CONFIG_DLM_DEBUG is not set + # # Profiling support # @@ -1010,11 +1094,13 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" @@ -1029,18 +1115,30 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y # Cryptographic options # CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_CAST5=m @@ -1052,6 +1150,7 @@ CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_CAMELLIA=m # CONFIG_CRYPTO_TEST is not set # @@ -1061,6 +1160,7 @@ CONFIG_CRYPTO_CRC32C=m # # Library routines # +CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC32=y @@ -1072,3 +1172,5 @@ CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/db1100_defconfig b/arch/mips/configs/db1100_defconfig index 0055ec41f207..529e6ebe2a8d 100644 --- a/arch/mips/configs/db1100_defconfig +++ b/arch/mips/configs/db1100_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc1 -# Thu Jul 6 10:03:34 2006 +# Linux kernel version: 2.6.20 +# Sun Feb 18 21:27:39 2007 # CONFIG_MIPS=y # # Machine selection # +CONFIG_ZONE_DMA=y # CONFIG_MIPS_MTX1 is not set # CONFIG_MIPS_BOSPORUS is not set # CONFIG_MIPS_PB1000 is not set @@ -25,8 +26,6 @@ CONFIG_MIPS_DB1100=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_IVR is not set -# CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set @@ -42,6 +41,7 @@ CONFIG_MIPS_DB1100=y # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_V2PCI is not set # CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set # CONFIG_DDB5477 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set @@ -64,14 +64,19 @@ CONFIG_MIPS_DB1100=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y # CONFIG_CPU_BIG_ENDIAN is not set CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y CONFIG_SOC_AU1100=y CONFIG_SOC_AU1X00=y @@ -116,8 +121,8 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_64KB is not set CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set CONFIG_64BIT_PHYS_ADDR=y CONFIG_CPU_HAS_LLSC=y @@ -135,6 +140,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -147,6 +153,7 @@ CONFIG_HZ=1000 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +# CONFIG_KEXEC is not set CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -165,15 +172,20 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y CONFIG_RELAY=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -181,12 +193,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y -CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -204,6 +216,7 @@ CONFIG_KMOD=y # # Block layer # +CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set @@ -241,6 +254,10 @@ CONFIG_MMU=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_TRAD_SIGNALS=y + +# +# Power management options +# # CONFIG_PM is not set # @@ -257,7 +274,10 @@ CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=m +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set @@ -278,10 +298,13 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_TCP_MD5SIG=y # # IP: Virtual Server Configuration @@ -300,15 +323,42 @@ CONFIG_NETFILTER=y CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m -# CONFIG_NF_CONNTRACK is not set +CONFIG_NF_CONNTRACK_ENABLED=m +CONFIG_NF_CONNTRACK_SUPPORT=y +# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CT_ACCT=y +CONFIG_NF_CONNTRACK_MARK=y +CONFIG_NF_CONNTRACK_SECMARK=y +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_SECMARK=m +CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m @@ -319,14 +369,17 @@ CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_QUOTA=m CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STATE=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m # # IP: Netfilter Configuration # -# CONFIG_IP_NF_CONNTRACK is not set +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -354,7 +407,6 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -410,11 +462,13 @@ CONFIG_MTD_PARTITIONS=y # User Modules And Translation Layers # CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set # # RAM/ROM/Flash chip drivers @@ -498,6 +552,10 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m +# +# Misc devices +# + # # ATA/ATAPI/MFM/RLL support # @@ -508,6 +566,12 @@ CONFIG_ATA_OVER_ETH=m # CONFIG_RAID_ATTRS=m # CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set # # Multi-device support (RAID and LVM) @@ -551,6 +615,8 @@ CONFIG_LXT_PHY=m CONFIG_CICADA_PHY=m CONFIG_VITESSE_PHY=m CONFIG_SMSC_PHY=m +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set # # Ethernet (10 or 100Mbit) @@ -592,6 +658,7 @@ CONFIG_PPP_DEFLATE=m CONFIG_PPP_MPPE=m CONFIG_PPPOE=m # CONFIG_SLIP is not set +CONFIG_SLHC=m # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set @@ -611,6 +678,7 @@ CONFIG_PPPOE=m # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces @@ -687,17 +755,12 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_GEN_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_RAW_DRIVER is not set # # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -721,15 +784,10 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HWMON is not set # CONFIG_HWMON_VID is not set -# -# Misc devices -# - # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -744,6 +802,7 @@ CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set # CONFIG_FB_MODE_HELPERS is not set @@ -785,6 +844,11 @@ CONFIG_LOGO_LINUX_CLUT224=y # # CONFIG_SOUND is not set +# +# HID Devices +# +# CONFIG_HID is not set + # # USB support # @@ -846,6 +910,14 @@ CONFIG_USB_ARCH_HAS_OHCI=y # DMA Devices # +# +# Auxiliary Display support +# + +# +# Virtualization +# + # # File systems # @@ -858,6 +930,7 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y +# CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y @@ -870,6 +943,7 @@ CONFIG_REISERFS_FS_SECURITY=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -880,6 +954,7 @@ CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_GENERIC_ACL=y # # CD-ROM/DVD Filesystems @@ -899,23 +974,25 @@ CONFIG_FUSE_FS=m # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set +CONFIG_CONFIGFS_FS=m # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set # CONFIG_JFFS2_FS is not set CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set @@ -944,7 +1021,6 @@ CONFIG_SUNRPC=y CONFIG_SMB_FS=m # CONFIG_SMB_NLS_DEFAULT is not set # CONFIG_CIFS is not set -# CONFIG_CIFS_DEBUG2 is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -1000,6 +1076,14 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set +# +# Distributed Lock Manager +# +CONFIG_DLM=m +CONFIG_DLM_TCP=y +# CONFIG_DLM_SCTP is not set +# CONFIG_DLM_DEBUG is not set + # # Profiling support # @@ -1010,11 +1094,13 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" @@ -1029,18 +1115,30 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y # Cryptographic options # CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_CAST5=m @@ -1052,6 +1150,7 @@ CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_CAMELLIA=m # CONFIG_CRYPTO_TEST is not set # @@ -1061,6 +1160,7 @@ CONFIG_CRYPTO_CRC32C=m # # Library routines # +CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC32=y @@ -1072,3 +1172,5 @@ CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/db1200_defconfig b/arch/mips/configs/db1200_defconfig index c41823b81be0..9e86dcd3c31e 100644 --- a/arch/mips/configs/db1200_defconfig +++ b/arch/mips/configs/db1200_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc1 -# Thu Jul 6 10:03:43 2006 +# Linux kernel version: 2.6.20 +# Sun Feb 18 21:27:40 2007 # CONFIG_MIPS=y # # Machine selection # +CONFIG_ZONE_DMA=y # CONFIG_MIPS_MTX1 is not set # CONFIG_MIPS_BOSPORUS is not set # CONFIG_MIPS_PB1000 is not set @@ -25,8 +26,6 @@ CONFIG_MIPS_DB1200=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_IVR is not set -# CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set @@ -42,6 +41,7 @@ CONFIG_MIPS_DB1200=y # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_V2PCI is not set # CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set # CONFIG_DDB5477 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set @@ -64,14 +64,19 @@ CONFIG_MIPS_DB1200=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set CONFIG_DMA_COHERENT=y CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y # CONFIG_CPU_BIG_ENDIAN is not set CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y CONFIG_SOC_AU1200=y CONFIG_SOC_AU1X00=y @@ -116,8 +121,8 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_64KB is not set CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set CONFIG_64BIT_PHYS_ADDR=y CONFIG_CPU_HAS_LLSC=y @@ -135,6 +140,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -147,6 +153,7 @@ CONFIG_HZ=1000 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +# CONFIG_KEXEC is not set CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -165,16 +172,21 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -182,12 +194,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y -CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -205,6 +217,7 @@ CONFIG_KMOD=y # # Block layer # +CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set @@ -251,6 +264,10 @@ CONFIG_PCMCIA_AU1X00=m CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_TRAD_SIGNALS=y + +# +# Power management options +# # CONFIG_PM is not set # @@ -267,7 +284,10 @@ CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=m +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set @@ -285,10 +305,13 @@ CONFIG_IP_FIB_HASH=y # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_TCP_MD5SIG=y # # IP: Virtual Server Configuration @@ -305,15 +328,41 @@ CONFIG_NETFILTER=y # Core Netfilter Configuration # # CONFIG_NETFILTER_NETLINK is not set -# CONFIG_NF_CONNTRACK is not set +CONFIG_NF_CONNTRACK_ENABLED=m +CONFIG_NF_CONNTRACK_SUPPORT=y +# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CT_ACCT=y +CONFIG_NF_CONNTRACK_MARK=y +CONFIG_NF_CONNTRACK_SECMARK=y +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_SECMARK=m +CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m @@ -324,14 +373,17 @@ CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_QUOTA=m CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STATE=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m # # IP: Netfilter Configuration # -# CONFIG_IP_NF_CONNTRACK is not set +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -359,7 +411,6 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -409,11 +460,13 @@ CONFIG_MTD_PARTITIONS=y # User Modules And Translation Layers # CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set # # RAM/ROM/Flash chip drivers @@ -499,14 +552,20 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# +# Misc devices +# + # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # @@ -540,6 +599,8 @@ CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ=128 # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_TGT=m +# CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y # @@ -559,20 +620,21 @@ CONFIG_CHR_DEV_SG=y CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set +CONFIG_SCSI_SCAN_ASYNC=y # -# SCSI Transport Attributes +# SCSI Transports # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set # # SCSI low-level drivers # # CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DEBUG is not set # @@ -584,6 +646,11 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_PCMCIA_QLOGIC is not set # CONFIG_PCMCIA_SYM53C500 is not set +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set + # # Multi-device support (RAID and LVM) # @@ -672,6 +739,7 @@ CONFIG_MII=m # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces @@ -750,10 +818,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_DTLK is not set # CONFIG_R3964 is not set -# -# Ftape, the floppy tape device driver -# - # # PCMCIA character devices # @@ -766,7 +830,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -782,6 +845,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # # Dallas's 1-wire bus # +# CONFIG_W1 is not set # # Hardware Monitoring support @@ -789,15 +853,10 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HWMON is not set # CONFIG_HWMON_VID is not set -# -# Misc devices -# - # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -812,6 +871,7 @@ CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set # CONFIG_FB_MODE_HELPERS is not set @@ -842,6 +902,12 @@ CONFIG_LOGO_LINUX_CLUT224=y # # CONFIG_SOUND is not set +# +# HID Devices +# +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + # # USB support # @@ -915,6 +981,14 @@ CONFIG_MMC_AU1X=y # DMA Devices # +# +# Auxiliary Display support +# + +# +# Virtualization +# + # # File systems # @@ -927,6 +1001,7 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y +# CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y @@ -938,6 +1013,7 @@ CONFIG_JFS_FS=y # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -948,6 +1024,7 @@ CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +CONFIG_GENERIC_ACL=y # # CD-ROM/DVD Filesystems @@ -955,7 +1032,6 @@ CONFIG_DNOTIFY=y CONFIG_ISO9660_FS=m CONFIG_JOLIET=y CONFIG_ZISOFS=y -CONFIG_ZISOFS_FS=m CONFIG_UDF_FS=m CONFIG_UDF_NLS=y @@ -974,23 +1050,25 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set +CONFIG_CONFIGFS_FS=m # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y @@ -1025,7 +1103,6 @@ CONFIG_SUNRPC=y CONFIG_SMB_FS=y # CONFIG_SMB_NLS_DEFAULT is not set # CONFIG_CIFS is not set -# CONFIG_CIFS_DEBUG2 is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -1081,6 +1158,14 @@ CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m +# +# Distributed Lock Manager +# +CONFIG_DLM=m +CONFIG_DLM_TCP=y +# CONFIG_DLM_SCTP is not set +# CONFIG_DLM_DEBUG is not set + # # Profiling support # @@ -1091,11 +1176,13 @@ CONFIG_NLS_UTF8=m # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="mem=48M" @@ -1109,7 +1196,44 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y # # Cryptographic options # -# CONFIG_CRYPTO is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_HMAC=m +CONFIG_CRYPTO_XCBC=m +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_CAMELLIA=m +# CONFIG_CRYPTO_TEST is not set # # Hardware crypto devices @@ -1118,6 +1242,7 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y # # Library routines # +CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set CONFIG_CRC32=y @@ -1129,3 +1254,5 @@ CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/db1500_defconfig b/arch/mips/configs/db1500_defconfig index 7d6d92187880..9c944611edaa 100644 --- a/arch/mips/configs/db1500_defconfig +++ b/arch/mips/configs/db1500_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc1 -# Thu Jul 6 10:03:56 2006 +# Linux kernel version: 2.6.20 +# Sun Feb 18 21:27:41 2007 # CONFIG_MIPS=y # # Machine selection # +CONFIG_ZONE_DMA=y # CONFIG_MIPS_MTX1 is not set # CONFIG_MIPS_BOSPORUS is not set # CONFIG_MIPS_PB1000 is not set @@ -25,8 +26,6 @@ CONFIG_MIPS_DB1500=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_IVR is not set -# CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set @@ -42,6 +41,7 @@ CONFIG_MIPS_DB1500=y # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_V2PCI is not set # CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set # CONFIG_DDB5477 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set @@ -64,15 +64,20 @@ CONFIG_MIPS_DB1500=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y # CONFIG_CPU_BIG_ENDIAN is not set CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y CONFIG_SOC_AU1500=y @@ -118,8 +123,8 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_64KB is not set CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set CONFIG_64BIT_PHYS_ADDR=y CONFIG_CPU_HAS_LLSC=y @@ -136,7 +141,8 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set +CONFIG_RESOURCES_64BIT=y +CONFIG_ZONE_DMA_FLAG=1 # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -149,6 +155,7 @@ CONFIG_HZ=1000 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +# CONFIG_KEXEC is not set CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -167,15 +174,20 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y CONFIG_RELAY=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -183,12 +195,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y -CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -206,6 +218,7 @@ CONFIG_KMOD=y # # Block layer # +CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set @@ -259,6 +272,10 @@ CONFIG_PCMCIA_AU1X00=m CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_TRAD_SIGNALS=y + +# +# Power management options +# # CONFIG_PM is not set # @@ -275,7 +292,10 @@ CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=m +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set @@ -296,10 +316,13 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_TCP_MD5SIG=y # # IP: Virtual Server Configuration @@ -318,15 +341,42 @@ CONFIG_NETFILTER=y CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m -# CONFIG_NF_CONNTRACK is not set +CONFIG_NF_CONNTRACK_ENABLED=m +CONFIG_NF_CONNTRACK_SUPPORT=y +# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CT_ACCT=y +CONFIG_NF_CONNTRACK_MARK=y +CONFIG_NF_CONNTRACK_SECMARK=y +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_SECMARK=m +CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m @@ -337,14 +387,17 @@ CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_QUOTA=m CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STATE=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m # # IP: Netfilter Configuration # -# CONFIG_IP_NF_CONNTRACK is not set +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -372,7 +425,6 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -428,11 +480,13 @@ CONFIG_MTD_PARTITIONS=y # User Modules And Translation Layers # CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set # # RAM/ROM/Flash chip drivers @@ -488,6 +542,7 @@ CONFIG_MTD_ALCHEMY=y # NAND Flash Device Drivers # # CONFIG_MTD_NAND is not set +# CONFIG_MTD_NAND_CAFE is not set # # OneNAND Flash Device Drivers @@ -523,10 +578,17 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m +# +# Misc devices +# +CONFIG_SGI_IOC4=m +# CONFIG_TIFM_CORE is not set + # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # @@ -536,6 +598,7 @@ CONFIG_BLK_DEV_IDE=y CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set CONFIG_BLK_DEV_IDECS=m +# CONFIG_BLK_DEV_DELKIN is not set # CONFIG_BLK_DEV_IDECD is not set # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set @@ -556,6 +619,12 @@ CONFIG_BLK_DEV_IDECS=m # CONFIG_RAID_ATTRS=m # CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set # # Multi-device support (RAID and LVM) @@ -606,6 +675,8 @@ CONFIG_LXT_PHY=m CONFIG_CICADA_PHY=m CONFIG_VITESSE_PHY=m CONFIG_SMSC_PHY=m +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set # # Ethernet (10 or 100Mbit) @@ -643,14 +714,17 @@ CONFIG_MIPS_AU1X00_ENET=y # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_QLA3XXX=m # # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3=m # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set +CONFIG_NETXEN_NIC=m # # Token Ring devices @@ -683,6 +757,7 @@ CONFIG_PPP_DEFLATE=m CONFIG_PPP_MPPE=m CONFIG_PPPOE=m # CONFIG_SLIP is not set +CONFIG_SLHC=m # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set @@ -702,6 +777,7 @@ CONFIG_PPPOE=m # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces @@ -780,10 +856,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_DRM is not set # @@ -798,7 +870,6 @@ CONFIG_SYNCLINK_CS=m # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -822,15 +893,10 @@ CONFIG_SYNCLINK_CS=m # CONFIG_HWMON is not set # CONFIG_HWMON_VID is not set -# -# Misc devices -# - # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -843,6 +909,7 @@ CONFIG_VIDEO_V4L2=y # # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -873,7 +940,6 @@ CONFIG_SND_VERBOSE_PROCFS=y # Generic devices # CONFIG_SND_AC97_CODEC=m -CONFIG_SND_AC97_BUS=m # CONFIG_SND_DUMMY is not set CONFIG_SND_VIRMIDI=m CONFIG_SND_MTPAV=m @@ -938,6 +1004,7 @@ CONFIG_SND_MTPAV=m # CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set +# CONFIG_SND_AC97_POWER_SAVE is not set # # ALSA MIPS devices @@ -955,19 +1022,29 @@ CONFIG_SND_AU1X00=m # CONFIG_SND_VXPOCKET is not set # CONFIG_SND_PDAUDIOCF is not set +# +# SoC audio support +# +# CONFIG_SND_SOC is not set + # # Open Sound System # CONFIG_SOUND_PRIME=y +# CONFIG_OBSOLETE_OSS is not set # CONFIG_SOUND_BT878 is not set -# CONFIG_SOUND_EMU10K1 is not set -# CONFIG_SOUND_FUSION is not set -# CONFIG_SOUND_ES1371 is not set # CONFIG_SOUND_ICH is not set # CONFIG_SOUND_TRIDENT is not set # CONFIG_SOUND_MSNDCLAS is not set # CONFIG_SOUND_MSNDPIN is not set # CONFIG_SOUND_VIA82CXXX is not set +CONFIG_AC97_BUS=m + +# +# HID Devices +# +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set # # USB support @@ -982,7 +1059,6 @@ CONFIG_USB=y # Miscellaneous USB options # # CONFIG_USB_DEVICEFS is not set -# CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set @@ -992,7 +1068,8 @@ CONFIG_USB=y # CONFIG_USB_EHCI_HCD is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set @@ -1010,14 +1087,12 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # may also be needed; see USB_STORAGE Help for more information # -# CONFIG_USB_STORAGE is not set # CONFIG_USB_LIBUSUAL is not set # # USB Input Devices # CONFIG_USB_HID=y -CONFIG_USB_HIDINPUT=y # CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_HID_FF is not set # CONFIG_USB_HIDDEV is not set @@ -1033,6 +1108,7 @@ CONFIG_USB_YEALINK=m # CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set +# CONFIG_USB_GTCO is not set # # USB Imaging devices @@ -1046,6 +1122,7 @@ CONFIG_USB_YEALINK=m # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set # CONFIG_USB_USBNET is not set CONFIG_USB_MON=y @@ -1063,18 +1140,20 @@ CONFIG_USB_MON=y # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set -# CONFIG_USB_CY7C63 is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGETKIT is not set -# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set CONFIG_USB_LD=m +# CONFIG_USB_TRANCEVIBRATOR is not set # # USB DSL modem support @@ -1130,6 +1209,14 @@ CONFIG_USB_LD=m # DMA Devices # +# +# Auxiliary Display support +# + +# +# Virtualization +# + # # File systems # @@ -1142,6 +1229,7 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y +# CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y @@ -1154,6 +1242,7 @@ CONFIG_REISERFS_FS_SECURITY=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -1164,6 +1253,7 @@ CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_GENERIC_ACL=y # # CD-ROM/DVD Filesystems @@ -1183,23 +1273,25 @@ CONFIG_FUSE_FS=m # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set +CONFIG_CONFIGFS_FS=m # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set # CONFIG_JFFS2_FS is not set CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set @@ -1228,7 +1320,6 @@ CONFIG_SUNRPC=y CONFIG_SMB_FS=m # CONFIG_SMB_NLS_DEFAULT is not set # CONFIG_CIFS is not set -# CONFIG_CIFS_DEBUG2 is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -1284,6 +1375,14 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set +# +# Distributed Lock Manager +# +CONFIG_DLM=m +CONFIG_DLM_TCP=y +# CONFIG_DLM_SCTP is not set +# CONFIG_DLM_DEBUG is not set + # # Profiling support # @@ -1294,11 +1393,13 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" @@ -1313,18 +1414,30 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y # Cryptographic options # CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_CAST5=m @@ -1336,6 +1449,7 @@ CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_CAMELLIA=m # CONFIG_CRYPTO_TEST is not set # @@ -1345,6 +1459,7 @@ CONFIG_CRYPTO_CRC32C=m # # Library routines # +CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC32=y @@ -1356,3 +1471,5 @@ CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/db1550_defconfig b/arch/mips/configs/db1550_defconfig index c681c91763aa..5b18d5da9858 100644 --- a/arch/mips/configs/db1550_defconfig +++ b/arch/mips/configs/db1550_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc1 -# Thu Jul 6 10:03:59 2006 +# Linux kernel version: 2.6.20 +# Sun Feb 18 21:27:42 2007 # CONFIG_MIPS=y # # Machine selection # +CONFIG_ZONE_DMA=y # CONFIG_MIPS_MTX1 is not set # CONFIG_MIPS_BOSPORUS is not set # CONFIG_MIPS_PB1000 is not set @@ -25,8 +26,6 @@ CONFIG_MIPS_DB1550=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_IVR is not set -# CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set @@ -42,6 +41,7 @@ CONFIG_MIPS_DB1550=y # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_V2PCI is not set # CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set # CONFIG_DDB5477 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set @@ -64,15 +64,20 @@ CONFIG_MIPS_DB1550=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y # CONFIG_CPU_BIG_ENDIAN is not set CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y CONFIG_SOC_AU1550=y CONFIG_SOC_AU1X00=y @@ -117,8 +122,8 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_64KB is not set CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set CONFIG_64BIT_PHYS_ADDR=y CONFIG_CPU_HAS_LLSC=y @@ -135,7 +140,8 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set +CONFIG_RESOURCES_64BIT=y +CONFIG_ZONE_DMA_FLAG=1 # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -148,6 +154,7 @@ CONFIG_HZ=1000 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +# CONFIG_KEXEC is not set CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -166,15 +173,20 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y CONFIG_RELAY=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -182,12 +194,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y -CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -205,6 +217,7 @@ CONFIG_KMOD=y # # Block layer # +CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set @@ -258,6 +271,10 @@ CONFIG_PCMCIA_AU1X00=m CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_TRAD_SIGNALS=y + +# +# Power management options +# # CONFIG_PM is not set # @@ -274,7 +291,10 @@ CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=m +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set @@ -295,10 +315,13 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_TCP_MD5SIG=y # # IP: Virtual Server Configuration @@ -317,15 +340,42 @@ CONFIG_NETFILTER=y CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m -# CONFIG_NF_CONNTRACK is not set +CONFIG_NF_CONNTRACK_ENABLED=m +CONFIG_NF_CONNTRACK_SUPPORT=y +# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CT_ACCT=y +CONFIG_NF_CONNTRACK_MARK=y +CONFIG_NF_CONNTRACK_SECMARK=y +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_SECMARK=m +CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m @@ -336,14 +386,17 @@ CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_QUOTA=m CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STATE=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m # # IP: Netfilter Configuration # -# CONFIG_IP_NF_CONNTRACK is not set +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -371,7 +424,6 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -427,11 +479,13 @@ CONFIG_MTD_PARTITIONS=y # User Modules And Translation Layers # CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set # # RAM/ROM/Flash chip drivers @@ -492,6 +546,7 @@ CONFIG_MTD_NAND=m CONFIG_MTD_NAND_IDS=m CONFIG_MTD_NAND_AU1550=m # CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_CAFE is not set # CONFIG_MTD_NAND_NANDSIM is not set # @@ -527,10 +582,17 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m +# +# Misc devices +# +CONFIG_SGI_IOC4=m +# CONFIG_TIFM_CORE is not set + # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # @@ -540,6 +602,7 @@ CONFIG_BLK_DEV_IDE=y CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set CONFIG_BLK_DEV_IDECS=m +# CONFIG_BLK_DEV_DELKIN is not set # CONFIG_BLK_DEV_IDECD is not set # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set @@ -567,8 +630,10 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +CONFIG_BLK_DEV_IT8213=m # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set @@ -578,6 +643,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set +CONFIG_BLK_DEV_TC86C001=m # CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set @@ -589,6 +655,12 @@ CONFIG_BLK_DEV_IDEDMA=y # CONFIG_RAID_ATTRS=m # CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set # # Multi-device support (RAID and LVM) @@ -639,6 +711,8 @@ CONFIG_LXT_PHY=m CONFIG_CICADA_PHY=m CONFIG_VITESSE_PHY=m CONFIG_SMSC_PHY=m +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set # # Ethernet (10 or 100Mbit) @@ -676,14 +750,17 @@ CONFIG_MIPS_AU1X00_ENET=y # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_QLA3XXX=m # # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3=m # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set +CONFIG_NETXEN_NIC=m # # Token Ring devices @@ -724,6 +801,7 @@ CONFIG_PPP_DEFLATE=m CONFIG_PPP_MPPE=m CONFIG_PPPOE=m # CONFIG_SLIP is not set +CONFIG_SLHC=m # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set @@ -743,6 +821,7 @@ CONFIG_PPPOE=m # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces @@ -821,10 +900,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_DRM is not set # @@ -839,7 +914,6 @@ CONFIG_SYNCLINK_CS=m # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -863,15 +937,10 @@ CONFIG_SYNCLINK_CS=m # CONFIG_HWMON is not set # CONFIG_HWMON_VID is not set -# -# Misc devices -# - # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -883,12 +952,18 @@ CONFIG_VIDEO_V4L2=y # # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set +# +# HID Devices +# +# CONFIG_HID is not set + # # USB support # @@ -951,6 +1026,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y # DMA Devices # +# +# Auxiliary Display support +# + +# +# Virtualization +# + # # File systems # @@ -963,6 +1046,7 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y +# CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y @@ -975,6 +1059,7 @@ CONFIG_REISERFS_FS_SECURITY=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -985,6 +1070,7 @@ CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_GENERIC_ACL=y # # CD-ROM/DVD Filesystems @@ -1004,23 +1090,25 @@ CONFIG_FUSE_FS=m # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set +CONFIG_CONFIGFS_FS=m # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set # CONFIG_JFFS2_FS is not set CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set @@ -1049,7 +1137,6 @@ CONFIG_SUNRPC=y CONFIG_SMB_FS=m # CONFIG_SMB_NLS_DEFAULT is not set # CONFIG_CIFS is not set -# CONFIG_CIFS_DEBUG2 is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -1105,6 +1192,14 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set +# +# Distributed Lock Manager +# +CONFIG_DLM=m +CONFIG_DLM_TCP=y +# CONFIG_DLM_SCTP is not set +# CONFIG_DLM_DEBUG is not set + # # Profiling support # @@ -1115,11 +1210,13 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" @@ -1134,18 +1231,30 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y # Cryptographic options # CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_CAST5=m @@ -1157,6 +1266,7 @@ CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_CAMELLIA=m # CONFIG_CRYPTO_TEST is not set # @@ -1166,6 +1276,7 @@ CONFIG_CRYPTO_CRC32C=m # # Library routines # +CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC32=y @@ -1177,3 +1288,5 @@ CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/ddb5477_defconfig b/arch/mips/configs/ddb5477_defconfig index dd4bb0080211..121018886189 100644 --- a/arch/mips/configs/ddb5477_defconfig +++ b/arch/mips/configs/ddb5477_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc1 -# Thu Jul 6 10:04:00 2006 +# Linux kernel version: 2.6.20 +# Sun Feb 18 21:27:43 2007 # CONFIG_MIPS=y # # Machine selection # +CONFIG_ZONE_DMA=y # CONFIG_MIPS_MTX1 is not set # CONFIG_MIPS_BOSPORUS is not set # CONFIG_MIPS_PB1000 is not set @@ -25,8 +26,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_IVR is not set -# CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set @@ -42,6 +41,7 @@ CONFIG_MIPS=y # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_V2PCI is not set # CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set CONFIG_DDB5477=y # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set @@ -65,10 +65,14 @@ CONFIG_DDB5477=y # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_DDB5477_BUS_FREQUENCY=0 CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_I8259=y @@ -117,8 +121,8 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y @@ -134,6 +138,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -146,6 +151,7 @@ CONFIG_HZ=1000 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +# CONFIG_KEXEC is not set CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -164,15 +170,20 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y CONFIG_RELAY=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -180,12 +191,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y -CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -198,6 +209,7 @@ CONFIG_BASE_SMALL=0 # # Block layer # +CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set @@ -239,6 +251,14 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_TRAD_SIGNALS=y +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set + # # Networking # @@ -253,7 +273,10 @@ CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=y +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set @@ -273,10 +296,13 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_TCP_MD5SIG=y # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set @@ -306,7 +332,6 @@ CONFIG_NETWORK_SECMARK=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -380,6 +405,12 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=y +# +# Misc devices +# +CONFIG_SGI_IOC4=y +# CONFIG_TIFM_CORE is not set + # # ATA/ATAPI/MFM/RLL support # @@ -390,6 +421,12 @@ CONFIG_ATA_OVER_ETH=y # CONFIG_RAID_ATTRS=y # CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set # # Multi-device support (RAID and LVM) @@ -440,6 +477,8 @@ CONFIG_LXT_PHY=y CONFIG_CICADA_PHY=y CONFIG_VITESSE_PHY=y CONFIG_SMSC_PHY=y +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set # # Ethernet (10 or 100Mbit) @@ -459,6 +498,7 @@ CONFIG_MII=y # CONFIG_HP100 is not set CONFIG_NET_PCI=y CONFIG_PCNET32=y +# CONFIG_PCNET32_NAPI is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set @@ -476,7 +516,7 @@ CONFIG_PCNET32=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set -# CONFIG_LAN_SAA9730 is not set +# CONFIG_SC92031 is not set # # Ethernet (1000 Mbit) @@ -495,14 +535,18 @@ CONFIG_PCNET32=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_QLA3XXX=y +# CONFIG_ATL1 is not set # # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3=y # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set +CONFIG_NETXEN_NIC=y # # Token Ring devices @@ -541,6 +585,7 @@ CONFIG_PCNET32=y # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces @@ -618,10 +663,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set @@ -629,7 +670,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -653,15 +693,10 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HWMON is not set # CONFIG_HWMON_VID is not set -# -# Misc devices -# - # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -679,12 +714,18 @@ CONFIG_VIDEO_V4L2=y # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set +# +# HID Devices +# +# CONFIG_HID is not set + # # USB support # @@ -747,6 +788,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y # DMA Devices # +# +# Auxiliary Display support +# + +# +# Virtualization +# + # # File systems # @@ -754,10 +803,12 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -787,17 +838,19 @@ CONFIG_FUSE_FS=y # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set +CONFIG_CONFIGFS_FS=y # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set @@ -829,7 +882,6 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set -# CONFIG_CIFS_DEBUG2 is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -846,6 +898,14 @@ CONFIG_MSDOS_PARTITION=y # # CONFIG_NLS is not set +# +# Distributed Lock Manager +# +CONFIG_DLM=y +CONFIG_DLM_TCP=y +# CONFIG_DLM_SCTP is not set +# CONFIG_DLM_DEBUG is not set + # # Profiling support # @@ -856,12 +916,13 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_FS is not set -# CONFIG_UNWIND_INFO is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="ip=any" @@ -876,7 +937,12 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y # Cryptographic options # CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=y CONFIG_CRYPTO_NULL=y CONFIG_CRYPTO_MD4=y CONFIG_CRYPTO_MD5=y @@ -885,9 +951,16 @@ CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y CONFIG_CRYPTO_WP512=y CONFIG_CRYPTO_TGR192=y +CONFIG_CRYPTO_GF128MUL=y +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=y +CONFIG_CRYPTO_LRW=y CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_FCRYPT=y CONFIG_CRYPTO_BLOWFISH=y CONFIG_CRYPTO_TWOFISH=y +CONFIG_CRYPTO_TWOFISH_COMMON=y CONFIG_CRYPTO_SERPENT=y CONFIG_CRYPTO_AES=y CONFIG_CRYPTO_CAST5=y @@ -899,6 +972,7 @@ CONFIG_CRYPTO_ANUBIS=y CONFIG_CRYPTO_DEFLATE=y CONFIG_CRYPTO_MICHAEL_MIC=y CONFIG_CRYPTO_CRC32C=y +CONFIG_CRYPTO_CAMELLIA=y # # Hardware crypto devices @@ -907,6 +981,7 @@ CONFIG_CRYPTO_CRC32C=y # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set CONFIG_CRC16=y CONFIG_CRC32=y @@ -914,3 +989,5 @@ CONFIG_LIBCRC32C=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/decstation_defconfig b/arch/mips/configs/decstation_defconfig index 8a31ce4be12c..2d717455a82f 100644 --- a/arch/mips/configs/decstation_defconfig +++ b/arch/mips/configs/decstation_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18 -# Tue Oct 3 11:57:53 2006 +# Linux kernel version: 2.6.20 +# Sun Feb 18 21:27:44 2007 # CONFIG_MIPS=y # # Machine selection # +CONFIG_ZONE_DMA=y # CONFIG_MIPS_MTX1 is not set # CONFIG_MIPS_BOSPORUS is not set # CONFIG_MIPS_PB1000 is not set @@ -25,8 +26,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set CONFIG_MACH_DECSTATION=y # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_IVR is not set -# CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set @@ -42,6 +41,7 @@ CONFIG_MACH_DECSTATION=y # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_V2PCI is not set # CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set # CONFIG_DDB5477 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set @@ -65,10 +65,14 @@ CONFIG_MACH_DECSTATION=y # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_EARLY_PRINTK=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y # CONFIG_CPU_BIG_ENDIAN is not set @@ -116,8 +120,8 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set CONFIG_CPU_HAS_WB=y CONFIG_GENERIC_HARDIRQS=y @@ -133,6 +137,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set CONFIG_HZ_128=y @@ -147,6 +152,7 @@ CONFIG_HZ=128 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +# CONFIG_KEXEC is not set CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -165,13 +171,16 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y @@ -245,6 +254,14 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_TRAD_SIGNALS=y +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set + # # Networking # @@ -260,7 +277,9 @@ CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=m +CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set @@ -281,11 +300,13 @@ CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_TCP_MD5SIG=y CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y @@ -298,10 +319,12 @@ CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m CONFIG_INET6_XFRM_MODE_TRANSPORT=m CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_SIT=m # CONFIG_IPV6_TUNNEL is not set -CONFIG_IPV6_SUBTREES=y CONFIG_IPV6_MULTIPLE_TABLES=y +CONFIG_IPV6_SUBTREES=y CONFIG_NETWORK_SECMARK=y # CONFIG_NETFILTER is not set @@ -388,6 +411,10 @@ CONFIG_BLK_DEV_LOOP=m # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# +# Misc devices +# + # # ATA/ATAPI/MFM/RLL support # @@ -398,6 +425,7 @@ CONFIG_BLK_DEV_LOOP=m # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_TGT=m # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y @@ -418,6 +446,7 @@ CONFIG_CHR_DEV_SG=m # CONFIG_SCSI_MULTI_LUN is not set CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_LOGGING is not set +CONFIG_SCSI_SCAN_ASYNC=y # # SCSI Transports @@ -502,6 +531,9 @@ CONFIG_DECLANCE=y # Wan interfaces # # CONFIG_WAN is not set +CONFIG_FDDI=y +CONFIG_DEFXX=m +CONFIG_DEFXX_MMIO=y # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_SHAPER is not set @@ -565,17 +597,12 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_RAW_DRIVER is not set # # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -599,15 +626,10 @@ CONFIG_RTC=y # CONFIG_HWMON is not set # CONFIG_HWMON_VID is not set -# -# Misc devices -# - # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -622,6 +644,7 @@ CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set # CONFIG_FB_MODE_HELPERS is not set @@ -708,6 +731,14 @@ CONFIG_LOGO_DEC_CLUT224=y # DMA Devices # +# +# Auxiliary Display support +# + +# +# Virtualization +# + # # File systems # @@ -720,6 +751,7 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y +# CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y @@ -727,6 +759,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -737,6 +770,7 @@ CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set CONFIG_FUSE_FS=m +CONFIG_GENERIC_ACL=y # # CD-ROM/DVD Filesystems @@ -806,7 +840,6 @@ CONFIG_SUNRPC=y # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set # CONFIG_9P_FS is not set -CONFIG_GENERIC_ACL=y # # Partition Types @@ -834,6 +867,14 @@ CONFIG_ULTRIX_PARTITION=y # # CONFIG_NLS is not set +# +# Distributed Lock Manager +# +CONFIG_DLM=m +CONFIG_DLM_TCP=y +# CONFIG_DLM_SCTP is not set +# CONFIG_DLM_DEBUG is not set + # # Profiling support # @@ -847,9 +888,10 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" @@ -866,19 +908,24 @@ CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=m CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_TWOFISH_COMMON=m @@ -893,6 +940,7 @@ CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_CAMELLIA=m # CONFIG_CRYPTO_TEST is not set # @@ -902,6 +950,7 @@ CONFIG_CRYPTO_CRC32C=m # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC32=y @@ -909,3 +958,5 @@ CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/e55_defconfig b/arch/mips/configs/e55_defconfig index 6fa4f914f6e4..0ee2fbb35f14 100644 --- a/arch/mips/configs/e55_defconfig +++ b/arch/mips/configs/e55_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc2 -# Tue Jul 25 23:15:03 2006 +# Linux kernel version: 2.6.20 +# Sun Feb 18 21:27:44 2007 # CONFIG_MIPS=y # # Machine selection # +CONFIG_ZONE_DMA=y # CONFIG_MIPS_MTX1 is not set # CONFIG_MIPS_BOSPORUS is not set # CONFIG_MIPS_PB1000 is not set @@ -25,8 +26,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_IVR is not set -# CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set @@ -42,6 +41,7 @@ CONFIG_MIPS=y # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_V2PCI is not set # CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set # CONFIG_DDB5477 is not set CONFIG_MACH_VR41XX=y # CONFIG_PMC_YOSEMITE is not set @@ -70,10 +70,14 @@ CONFIG_CASIO_E55=y # CONFIG_VICTOR_MPC30X is not set # CONFIG_ZAO_CAPCELLA is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y # CONFIG_CPU_BIG_ENDIAN is not set @@ -106,6 +110,7 @@ CONFIG_CPU_VR41XX=y # CONFIG_CPU_SB1 is not set CONFIG_SYS_HAS_CPU_VR41XX=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y @@ -119,8 +124,8 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y @@ -135,6 +140,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -147,6 +153,7 @@ CONFIG_HZ=1000 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +# CONFIG_KEXEC is not set CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -165,13 +172,17 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_UTS_NS is not set # CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set # CONFIG_HOTPLUG is not set @@ -179,12 +190,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y -CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -202,6 +213,7 @@ CONFIG_KMOD=y # # Block layer # +CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set @@ -240,6 +252,14 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_TRAD_SIGNALS=y +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set + # # Networking # @@ -287,10 +307,15 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set +# +# Misc devices +# + # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # @@ -319,6 +344,12 @@ CONFIG_IDE_GENERIC=y # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set # # Old CD-ROM drivers (not SCSI, not IDE) @@ -356,6 +387,7 @@ CONFIG_IDE_GENERIC=y # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces @@ -436,10 +468,6 @@ CONFIG_WATCHDOG=y # CONFIG_GEN_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# CONFIG_GPIO_VR41XX=y # CONFIG_RAW_DRIVER is not set @@ -447,7 +475,6 @@ CONFIG_GPIO_VR41XX=y # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -463,6 +490,7 @@ CONFIG_GPIO_VR41XX=y # # Dallas's 1-wire bus # +# CONFIG_W1 is not set # # Hardware Monitoring support @@ -470,15 +498,10 @@ CONFIG_GPIO_VR41XX=y # CONFIG_HWMON is not set # CONFIG_HWMON_VID is not set -# -# Misc devices -# - # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -496,12 +519,19 @@ CONFIG_VIDEO_V4L2=y # CONFIG_VGA_CONSOLE is not set # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set +# +# HID Devices +# +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + # # USB support # @@ -562,6 +592,14 @@ CONFIG_DUMMY_CONSOLE=y # DMA Devices # +# +# Auxiliary Display support +# + +# +# Virtualization +# + # # File systems # @@ -569,10 +607,12 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set +CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -582,6 +622,7 @@ CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y CONFIG_FUSE_FS=m +CONFIG_GENERIC_ACL=y # # CD-ROM/DVD Filesystems @@ -601,8 +642,10 @@ CONFIG_FUSE_FS=m # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set @@ -645,11 +688,13 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="console=ttyVR0,19200 ide0=0x1f0,0x3f6,40 mem=8M" @@ -664,10 +709,6 @@ CONFIG_CMDLINE="console=ttyVR0,19200 ide0=0x1f0,0x3f6,40 mem=8M" # # CONFIG_CRYPTO is not set -# -# Hardware crypto devices -# - # # Library routines # @@ -676,3 +717,5 @@ CONFIG_CMDLINE="console=ttyVR0,19200 ide0=0x1f0,0x3f6,40 mem=8M" # CONFIG_CRC32 is not set # CONFIG_LIBCRC32C is not set CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/emma2rh_defconfig b/arch/mips/configs/emma2rh_defconfig index 4c9d0405a5df..218fe6e5f2db 100644 --- a/arch/mips/configs/emma2rh_defconfig +++ b/arch/mips/configs/emma2rh_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc1 -# Thu Jul 6 10:04:05 2006 +# Linux kernel version: 2.6.20 +# Sun Feb 18 21:27:46 2007 # CONFIG_MIPS=y # # Machine selection # +CONFIG_ZONE_DMA=y # CONFIG_MIPS_MTX1 is not set # CONFIG_MIPS_BOSPORUS is not set # CONFIG_MIPS_PB1000 is not set @@ -25,8 +26,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_IVR is not set -# CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set @@ -42,6 +41,7 @@ CONFIG_MIPS=y # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_V2PCI is not set # CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set # CONFIG_DDB5477 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set @@ -64,10 +64,14 @@ CONFIG_MARKEINS=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_CPU_BIG_ENDIAN=y @@ -116,8 +120,8 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set # CONFIG_64BIT_PHYS_ADDR is not set CONFIG_CPU_HAS_LLSC=y @@ -134,6 +138,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -147,6 +152,7 @@ CONFIG_HZ=1000 # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_PREEMPT_BKL=y +# CONFIG_KEXEC is not set CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -166,17 +172,22 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -184,12 +195,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y -CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -207,6 +218,7 @@ CONFIG_KMOD=y # # Block layer # +CONFIG_BLOCK=y CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set @@ -248,6 +260,14 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_TRAD_SIGNALS=y +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set + # # Networking # @@ -262,7 +282,10 @@ CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y @@ -270,7 +293,6 @@ CONFIG_ASK_IP_FIB_HASH=y # CONFIG_IP_FIB_TRIE is not set CONFIG_IP_FIB_HASH=y CONFIG_IP_MULTIPLE_TABLES=y -# CONFIG_IP_ROUTE_FWMARK is not set CONFIG_IP_ROUTE_MULTIPATH=y # CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set CONFIG_IP_ROUTE_VERBOSE=y @@ -287,13 +309,16 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set +CONFIG_INET_TUNNEL=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_TCP_MD5SIG=y # # IP: Virtual Server Configuration @@ -305,11 +330,17 @@ CONFIG_IPV6=m # CONFIG_INET6_AH is not set # CONFIG_INET6_ESP is not set # CONFIG_INET6_IPCOMP is not set +CONFIG_IPV6_MIP6=y # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set CONFIG_INET6_XFRM_MODE_TRANSPORT=m CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_SIT=m # CONFIG_IPV6_TUNNEL is not set +CONFIG_IPV6_MULTIPLE_TABLES=y +CONFIG_IPV6_SUBTREES=y CONFIG_NETWORK_SECMARK=y CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -318,19 +349,125 @@ CONFIG_NETFILTER=y # Core Netfilter Configuration # # CONFIG_NETFILTER_NETLINK is not set -# CONFIG_NF_CONNTRACK is not set -# CONFIG_NETFILTER_XTABLES is not set +CONFIG_NF_CONNTRACK_ENABLED=m +CONFIG_NF_CONNTRACK_SUPPORT=y +# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CT_ACCT=y +CONFIG_NF_CONNTRACK_MARK=y +CONFIG_NF_CONNTRACK_SECMARK=y +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_SECMARK=m +CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m # # IP: Netfilter Configuration # -# CONFIG_IP_NF_CONNTRACK is not set +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y # CONFIG_IP_NF_QUEUE is not set +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_SAME=m +CONFIG_NF_NAT_SNMP_BASIC=m +CONFIG_NF_NAT_PROTO_GRE=m +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +CONFIG_NF_NAT_TFTP=m +CONFIG_NF_NAT_AMANDA=m +CONFIG_NF_NAT_PPTP=m +CONFIG_NF_NAT_H323=m +CONFIG_NF_NAT_SIP=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m # # IPv6: Netfilter Configuration (EXPERIMENTAL) # +CONFIG_NF_CONNTRACK_IPV6=m # CONFIG_IP6_NF_QUEUE is not set +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_OWNER=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_MANGLE=m +CONFIG_IP6_NF_TARGET_HL=m +CONFIG_IP6_NF_RAW=m # # DCCP Configuration (EXPERIMENTAL) @@ -360,7 +497,6 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -368,6 +504,7 @@ CONFIG_SCTP_HMAC_MD5=y # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y # # Network testing @@ -377,6 +514,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_IEEE80211 is not set +CONFIG_FIB_RULES=y # # Device Drivers @@ -387,7 +525,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set +CONFIG_FW_LOADER=m # CONFIG_SYS_HYPERVISOR is not set # @@ -409,11 +547,13 @@ CONFIG_MTD_CMDLINE_PARTS=y # User Modules And Translation Layers # CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set # # RAM/ROM/Flash chip drivers @@ -471,6 +611,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # NAND Flash Device Drivers # # CONFIG_MTD_NAND is not set +# CONFIG_MTD_NAND_CAFE is not set # # OneNAND Flash Device Drivers @@ -503,6 +644,12 @@ CONFIG_BLK_DEV_CRYPTOLOOP=m # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# +# Misc devices +# +CONFIG_SGI_IOC4=m +# CONFIG_TIFM_CORE is not set + # # ATA/ATAPI/MFM/RLL support # @@ -513,6 +660,8 @@ CONFIG_BLK_DEV_CRYPTOLOOP=m # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=m +CONFIG_SCSI_TGT=m +# CONFIG_SCSI_NETLINK is not set # CONFIG_SCSI_PROC_FS is not set # @@ -531,14 +680,17 @@ CONFIG_CHR_DEV_SG=m # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set +CONFIG_SCSI_SCAN_ASYNC=y # -# SCSI Transport Attributes +# SCSI Transports # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set +CONFIG_SCSI_SAS_ATTRS=m +CONFIG_SCSI_SAS_LIBSAS=m +# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set # # SCSI low-level drivers @@ -551,26 +703,35 @@ CONFIG_CHR_DEV_SG=m # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set +CONFIG_SCSI_AIC94XX=m +# CONFIG_AIC94XX_DEBUG is not set # CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_SATA is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set # # Multi-device support (RAID and LVM) @@ -649,7 +810,7 @@ CONFIG_NATSEMI=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set -# CONFIG_LAN_SAA9730 is not set +# CONFIG_SC92031 is not set # # Ethernet (1000 Mbit) @@ -668,14 +829,18 @@ CONFIG_NATSEMI=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_QLA3XXX=m +# CONFIG_ATL1 is not set # # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3=m # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set +CONFIG_NETXEN_NIC=m # # Token Ring devices @@ -703,6 +868,7 @@ CONFIG_PPP_DEFLATE=m # CONFIG_PPP_MPPE is not set # CONFIG_PPPOE is not set # CONFIG_SLIP is not set +CONFIG_SLHC=m # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set @@ -723,6 +889,7 @@ CONFIG_PPP_DEFLATE=m # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces @@ -790,10 +957,6 @@ CONFIG_GEN_RTC_X=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set @@ -801,7 +964,6 @@ CONFIG_GEN_RTC_X=y # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -830,6 +992,7 @@ CONFIG_I2C_CHARDEV=y # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PASEMI is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set # CONFIG_I2C_SIS5595 is not set @@ -865,6 +1028,7 @@ CONFIG_I2C_DEBUG_BUS=y # # Dallas's 1-wire bus # +# CONFIG_W1 is not set # # Hardware Monitoring support @@ -898,29 +1062,27 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set -# -# Misc devices -# - # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -932,12 +1094,18 @@ CONFIG_VIDEO_V4L2=y # # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set +# +# HID Devices +# +# CONFIG_HID is not set + # # USB support # @@ -1000,6 +1168,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y # DMA Devices # +# +# Auxiliary Display support +# + +# +# Virtualization +# + # # File systems # @@ -1012,6 +1188,7 @@ CONFIG_EXT3_FS=m CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set CONFIG_JBD=m # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y @@ -1023,6 +1200,7 @@ CONFIG_XFS_FS=m # CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -1033,6 +1211,7 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=m # CONFIG_FUSE_FS is not set +CONFIG_GENERIC_ACL=y # # CD-ROM/DVD Filesystems @@ -1057,11 +1236,13 @@ CONFIG_NTFS_FS=m # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set +CONFIG_CONFIGFS_FS=m # # Miscellaneous filesystems @@ -1073,7 +1254,6 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y @@ -1118,7 +1298,6 @@ CONFIG_RPCSEC_GSS_KRB5=y CONFIG_SMB_FS=m # CONFIG_SMB_NLS_DEFAULT is not set # CONFIG_CIFS is not set -# CONFIG_CIFS_DEBUG2 is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -1174,6 +1353,14 @@ CONFIG_NLS_ISO8859_1=m # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m +# +# Distributed Lock Manager +# +CONFIG_DLM=m +CONFIG_DLM_TCP=y +# CONFIG_DLM_SCTP is not set +# CONFIG_DLM_DEBUG is not set + # # Profiling support # @@ -1184,11 +1371,13 @@ CONFIG_NLS_UTF8=m # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="console=ttyS0,115200 mem=192m ip=bootp root=/dev/nfs rw" @@ -1202,7 +1391,12 @@ CONFIG_CMDLINE="console=ttyS0,115200 mem=192m ip=bootp root=/dev/nfs rw" # Cryptographic options # CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=m # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y @@ -1211,7 +1405,13 @@ CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_FCRYPT=m # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_SERPENT is not set @@ -1225,6 +1425,7 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set +CONFIG_CRYPTO_CAMELLIA=m # CONFIG_CRYPTO_TEST is not set # @@ -1234,10 +1435,17 @@ CONFIG_CRYPTO_DES=y # # Library routines # +CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/ev64120_defconfig b/arch/mips/configs/ev64120_defconfig index d5b49735683b..5ad4870ad5eb 100644 --- a/arch/mips/configs/ev64120_defconfig +++ b/arch/mips/configs/ev64120_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc1 -# Thu Jul 6 10:04:05 2006 +# Linux kernel version: 2.6.20 +# Sun Feb 18 21:27:46 2007 # CONFIG_MIPS=y # # Machine selection # +CONFIG_ZONE_DMA=y # CONFIG_MIPS_MTX1 is not set # CONFIG_MIPS_BOSPORUS is not set # CONFIG_MIPS_PB1000 is not set @@ -25,8 +26,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set CONFIG_MIPS_EV64120=y -# CONFIG_MIPS_IVR is not set -# CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set @@ -42,6 +41,7 @@ CONFIG_MIPS_EV64120=y # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_V2PCI is not set # CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set # CONFIG_DDB5477 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set @@ -65,10 +65,14 @@ CONFIG_MIPS_EV64120=y # CONFIG_TOSHIBA_RBTX4938 is not set # CONFIG_EVB_PCI1 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_CPU_BIG_ENDIAN=y @@ -118,8 +122,8 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set # CONFIG_64BIT_PHYS_ADDR is not set CONFIG_CPU_HAS_LLSC=y @@ -136,6 +140,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -148,6 +153,7 @@ CONFIG_HZ=1000 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +# CONFIG_KEXEC is not set CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -166,15 +172,20 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y CONFIG_RELAY=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -182,12 +193,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y -CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -205,6 +216,7 @@ CONFIG_MODULE_SRCVERSION_ALL=y # # Block layer # +CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set @@ -246,6 +258,14 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_TRAD_SIGNALS=y +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set + # # Networking # @@ -259,7 +279,10 @@ CONFIG_NET=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=m +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set @@ -279,10 +302,13 @@ CONFIG_IP_PNP=y # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_TCP_MD5SIG=y # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set @@ -312,7 +338,6 @@ CONFIG_NETWORK_SECMARK=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -385,6 +410,12 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m +# +# Misc devices +# +CONFIG_SGI_IOC4=m +# CONFIG_TIFM_CORE is not set + # # ATA/ATAPI/MFM/RLL support # @@ -395,6 +426,12 @@ CONFIG_ATA_OVER_ETH=m # CONFIG_RAID_ATTRS=m # CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set # # Multi-device support (RAID and LVM) @@ -445,6 +482,8 @@ CONFIG_LXT_PHY=m CONFIG_CICADA_PHY=m CONFIG_VITESSE_PHY=m CONFIG_SMSC_PHY=m +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set # # Ethernet (10 or 100Mbit) @@ -480,14 +519,17 @@ CONFIG_NET_ETHERNET=y # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_QLA3XXX=m # # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3=m # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set +CONFIG_NETXEN_NIC=m # # Token Ring devices @@ -515,6 +557,7 @@ CONFIG_PPP_ASYNC=y CONFIG_PPP_MPPE=m # CONFIG_PPPOE is not set # CONFIG_SLIP is not set +CONFIG_SLHC=y # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set @@ -534,6 +577,7 @@ CONFIG_PPP_MPPE=m # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces @@ -611,10 +655,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set @@ -622,7 +662,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -646,15 +685,10 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HWMON is not set # CONFIG_HWMON_VID is not set -# -# Misc devices -# - # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -672,12 +706,18 @@ CONFIG_VIDEO_V4L2=y # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set +# +# HID Devices +# +# CONFIG_HID is not set + # # USB support # @@ -740,6 +780,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y # DMA Devices # +# +# Auxiliary Display support +# + +# +# Virtualization +# + # # File systems # @@ -747,10 +795,12 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -780,17 +830,19 @@ CONFIG_FUSE_FS=m # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set +CONFIG_CONFIGFS_FS=m # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set @@ -819,7 +871,6 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set -# CONFIG_CIFS_DEBUG2 is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -836,6 +887,14 @@ CONFIG_MSDOS_PARTITION=y # # CONFIG_NLS is not set +# +# Distributed Lock Manager +# +CONFIG_DLM=m +CONFIG_DLM_TCP=y +# CONFIG_DLM_SCTP is not set +# CONFIG_DLM_DEBUG is not set + # # Profiling support # @@ -846,11 +905,13 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs rw nfsroot=192.168.1.1:/mnt/disk2/fs.gal ip=192.168.1.211:192.168.1.1:::gt::" @@ -865,18 +926,30 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y # Cryptographic options # CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_CAST5=m @@ -888,6 +961,7 @@ CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_CAMELLIA=m # CONFIG_CRYPTO_TEST is not set # @@ -897,6 +971,7 @@ CONFIG_CRYPTO_CRC32C=m # # Library routines # +CONFIG_BITREVERSE=m CONFIG_CRC_CCITT=y CONFIG_CRC16=m CONFIG_CRC32=m @@ -904,3 +979,5 @@ CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/excite_defconfig b/arch/mips/configs/excite_defconfig index 697140c6562f..5e179fe599b3 100644 --- a/arch/mips/configs/excite_defconfig +++ b/arch/mips/configs/excite_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc1 -# Thu Jul 6 10:04:09 2006 +# Linux kernel version: 2.6.20 +# Sun Feb 18 21:27:47 2007 # CONFIG_MIPS=y # # Machine selection # +CONFIG_ZONE_DMA=y # CONFIG_MIPS_MTX1 is not set # CONFIG_MIPS_BOSPORUS is not set # CONFIG_MIPS_PB1000 is not set @@ -26,8 +27,6 @@ CONFIG_BASLER_EXCITE=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_IVR is not set -# CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set @@ -43,6 +42,7 @@ CONFIG_BASLER_EXCITE=y # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_V2PCI is not set # CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set # CONFIG_DDB5477 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set @@ -65,10 +65,14 @@ CONFIG_BASLER_EXCITE=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set CONFIG_DMA_COHERENT=y CONFIG_CPU_BIG_ENDIAN=y # CONFIG_CPU_LITTLE_ENDIAN is not set @@ -76,6 +80,10 @@ CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y CONFIG_IRQ_CPU=y CONFIG_IRQ_CPU_RM7K=y CONFIG_IRQ_CPU_RM9K=y +CONFIG_MIPS_RM9122=y +CONFIG_SERIAL_RM9000=y +CONFIG_GPI_RM9000=y +CONFIG_WDT_RM9000=y CONFIG_MIPS_L1_CACHE_SHIFT=5 # @@ -101,6 +109,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 CONFIG_CPU_RM9000=y # CONFIG_CPU_SB1 is not set CONFIG_SYS_HAS_CPU_RM9000=y +CONFIG_WEAK_ORDERING=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y @@ -117,8 +126,8 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_64KB is not set CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set # CONFIG_64BIT_PHYS_ADDR is not set CONFIG_CPU_HAS_LLSC=y @@ -136,6 +145,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -149,6 +159,7 @@ CONFIG_HZ=1000 # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_PREEMPT_BKL=y +# CONFIG_KEXEC is not set CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -168,15 +179,20 @@ CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -184,12 +200,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y -CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -207,6 +223,7 @@ CONFIG_KMOD=y # # Block layer # +CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set @@ -248,6 +265,14 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_TRAD_SIGNALS=y +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set + # # Networking # @@ -262,6 +287,8 @@ CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -282,10 +309,13 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_TCP_MD5SIG=y # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set @@ -315,7 +345,6 @@ CONFIG_NETWORK_SECMARK=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -342,7 +371,7 @@ CONFIG_NETWORK_SECMARK=y # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set +CONFIG_FW_LOADER=m # CONFIG_SYS_HYPERVISOR is not set # @@ -364,11 +393,13 @@ CONFIG_MTD_PARTITIONS=y # User Modules And Translation Layers # CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set # # RAM/ROM/Flash chip drivers @@ -420,6 +451,7 @@ CONFIG_MTD_NAND_VERIFY_WRITE=y # CONFIG_MTD_NAND_ECC_SMC is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_CAFE is not set # CONFIG_MTD_NAND_NANDSIM is not set # @@ -454,6 +486,12 @@ CONFIG_BLK_DEV_LOOP=m # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# +# Misc devices +# +CONFIG_SGI_IOC4=m +# CONFIG_TIFM_CORE is not set + # # ATA/ATAPI/MFM/RLL support # @@ -464,6 +502,8 @@ CONFIG_BLK_DEV_LOOP=m # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_TGT=m +# CONFIG_SCSI_NETLINK is not set # CONFIG_SCSI_PROC_FS is not set # @@ -482,14 +522,17 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set +CONFIG_SCSI_SCAN_ASYNC=y # -# SCSI Transport Attributes +# SCSI Transports # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set +CONFIG_SCSI_SAS_ATTRS=m +CONFIG_SCSI_SAS_LIBSAS=m +# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set # # SCSI low-level drivers @@ -502,26 +545,35 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set +CONFIG_SCSI_AIC94XX=m +# CONFIG_AIC94XX_DEBUG is not set # CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_SATA is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set # # Multi-device support (RAID and LVM) @@ -585,14 +637,17 @@ CONFIG_NETDEVICES=y # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_QLA3XXX=m # # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3=m # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set +CONFIG_NETXEN_NIC=m # # Token Ring devices @@ -632,6 +687,7 @@ CONFIG_NETDEVICES=y # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces @@ -707,6 +763,7 @@ CONFIG_WATCHDOG=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set +CONFIG_WDT_RM9K_GPI=m # # PCI-based Watchdog Cards @@ -724,10 +781,6 @@ CONFIG_WATCHDOG=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set @@ -735,7 +788,6 @@ CONFIG_WATCHDOG=y # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -751,6 +803,7 @@ CONFIG_WATCHDOG=y # # Dallas's 1-wire bus # +# CONFIG_W1 is not set # # Hardware Monitoring support @@ -758,15 +811,10 @@ CONFIG_WATCHDOG=y # CONFIG_HWMON is not set # CONFIG_HWMON_VID is not set -# -# Misc devices -# - # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -782,6 +830,7 @@ CONFIG_FB=y # CONFIG_FB_CFB_FILLRECT is not set # CONFIG_FB_CFB_COPYAREA is not set # CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set # CONFIG_FB_MODE_HELPERS is not set @@ -798,6 +847,7 @@ CONFIG_FB=y # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set # CONFIG_FB_NEOMAGIC is not set @@ -830,6 +880,12 @@ CONFIG_FONT_8x16=y # # CONFIG_SOUND is not set +# +# HID Devices +# +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + # # USB support # @@ -843,8 +899,8 @@ CONFIG_USB=y # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set # @@ -854,9 +910,11 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set @@ -884,14 +942,13 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_LIBUSUAL is not set # # USB Input Devices # CONFIG_USB_HID=m -CONFIG_USB_HIDINPUT=y # CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_HID_FF is not set # CONFIG_USB_HIDDEV is not set @@ -913,6 +970,7 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set +# CONFIG_USB_GTCO is not set # # USB Imaging devices @@ -927,6 +985,7 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set # CONFIG_USB_USBNET is not set # CONFIG_USB_MON is not set @@ -944,19 +1003,21 @@ CONFIG_USB_HIDINPUT=y # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set -# CONFIG_USB_CY7C63 is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGETKIT is not set -# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_TEST is not set # @@ -1013,6 +1074,14 @@ CONFIG_USB_HIDINPUT=y # DMA Devices # +# +# Auxiliary Display support +# + +# +# Virtualization +# + # # File systems # @@ -1020,10 +1089,12 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set +CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -1034,6 +1105,7 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +CONFIG_GENERIC_ACL=y # # CD-ROM/DVD Filesystems @@ -1056,11 +1128,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set +CONFIG_CONFIGFS_FS=m # # Miscellaneous filesystems @@ -1072,7 +1146,6 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y @@ -1107,7 +1180,6 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set -# CONFIG_CIFS_DEBUG2 is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -1178,6 +1250,14 @@ CONFIG_NLS_ISO8859_1=m # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set +# +# Distributed Lock Manager +# +CONFIG_DLM=m +CONFIG_DLM_TCP=y +# CONFIG_DLM_SCTP is not set +# CONFIG_DLM_DEBUG is not set + # # Profiling support # @@ -1188,11 +1268,13 @@ CONFIG_NLS_ISO8859_1=m # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" @@ -1206,16 +1288,27 @@ CONFIG_CMDLINE="" # Cryptographic options # CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_MANAGER=m # CONFIG_CRYPTO_HMAC is not set +CONFIG_CRYPTO_XCBC=m # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_MD4 is not set -# CONFIG_CRYPTO_MD5 is not set +CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_LRW=m # CONFIG_CRYPTO_DES is not set +CONFIG_CRYPTO_FCRYPT=m # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_SERPENT is not set @@ -1229,6 +1322,7 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set +CONFIG_CRYPTO_CAMELLIA=m # CONFIG_CRYPTO_TEST is not set # @@ -1238,6 +1332,7 @@ CONFIG_CRYPTO=y # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC32=y @@ -1245,3 +1340,5 @@ CONFIG_CRC32=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/ip22_defconfig b/arch/mips/configs/ip22_defconfig index f9812d1e4579..864de219eb67 100644 --- a/arch/mips/configs/ip22_defconfig +++ b/arch/mips/configs/ip22_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc1 -# Thu Jul 6 10:04:10 2006 +# Linux kernel version: 2.6.20 +# Sun Feb 18 21:27:48 2007 # CONFIG_MIPS=y # # Machine selection # +CONFIG_ZONE_DMA=y # CONFIG_MIPS_MTX1 is not set # CONFIG_MIPS_BOSPORUS is not set # CONFIG_MIPS_PB1000 is not set @@ -25,8 +26,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_IVR is not set -# CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set @@ -42,6 +41,7 @@ CONFIG_MIPS=y # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_V2PCI is not set # CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set # CONFIG_DDB5477 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set @@ -64,13 +64,18 @@ CONFIG_SGI_IP22=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set CONFIG_ARC=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y +CONFIG_GENERIC_ISA_DMA_SUPPORT_BROKEN=y CONFIG_CPU_BIG_ENDIAN=y # CONFIG_CPU_LITTLE_ENDIAN is not set CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y @@ -123,8 +128,8 @@ CONFIG_PAGE_SIZE_4KB=y CONFIG_BOARD_SCACHE=y CONFIG_IP22_CPU_SCACHE=y CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set # CONFIG_64BIT_PHYS_ADDR is not set CONFIG_CPU_HAS_LLSC=y @@ -141,6 +146,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -153,6 +159,7 @@ CONFIG_HZ=1000 # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set +# CONFIG_KEXEC is not set CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -171,16 +178,21 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_SYSFS_DEPRECATED=y CONFIG_RELAY=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set # CONFIG_HOTPLUG is not set @@ -188,12 +200,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y -CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -211,6 +223,7 @@ CONFIG_KMOD=y # # Block layer # +CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set @@ -238,7 +251,6 @@ CONFIG_MMU=y # # PCCARD (PCMCIA/CardBus) support # -# CONFIG_PCCARD is not set # # PCI Hotplug Support @@ -251,6 +263,14 @@ CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m CONFIG_TRAD_SIGNALS=y +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set + # # Networking # @@ -265,7 +285,10 @@ CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=m +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set @@ -286,10 +309,13 @@ CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_TCP_MD5SIG=y # # IP: Virtual Server Configuration @@ -331,11 +357,17 @@ CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m +CONFIG_IPV6_MIP6=y CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m CONFIG_INET6_XFRM_MODE_TRANSPORT=m CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_SIT=m CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_MULTIPLE_TABLES=y +CONFIG_IPV6_SUBTREES=y CONFIG_NETWORK_SECMARK=y CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -346,19 +378,43 @@ CONFIG_NETFILTER=y CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NF_CONNTRACK_ENABLED=m +CONFIG_NF_CONNTRACK_SUPPORT=y +# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CT_ACCT=y +CONFIG_NF_CONNTRACK_MARK=y +CONFIG_NF_CONNTRACK_SECMARK=y +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +CONFIG_NETFILTER_XT_TARGET_DSCP=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NOTRACK=m CONFIG_NETFILTER_XT_TARGET_SECMARK=m CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HELPER=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m @@ -375,60 +431,45 @@ CONFIG_NETFILTER_XT_MATCH_STATE=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m # # IP: Netfilter Configuration # -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_CT_ACCT=y -CONFIG_IP_NF_CONNTRACK_MARK=y -CONFIG_IP_NF_CONNTRACK_SECMARK=y -CONFIG_IP_NF_CONNTRACK_EVENTS=y -CONFIG_IP_NF_CONNTRACK_NETLINK=m -# CONFIG_IP_NF_CT_PROTO_SCTP is not set -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -# CONFIG_IP_NF_NETBIOS_NS is not set -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m -CONFIG_IP_NF_PPTP=m -CONFIG_IP_NF_H323=m -CONFIG_IP_NF_SIP=m +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_IPRANGE=m CONFIG_IP_NF_MATCH_TOS=m CONFIG_IP_NF_MATCH_RECENT=m CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_MATCH_OWNER=m CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_NAT_PPTP=m -CONFIG_IP_NF_NAT_H323=m -CONFIG_IP_NF_NAT_SIP=m +CONFIG_NF_NAT_SNMP_BASIC=m +CONFIG_NF_NAT_PROTO_GRE=m +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +CONFIG_NF_NAT_TFTP=m +CONFIG_NF_NAT_AMANDA=m +CONFIG_NF_NAT_PPTP=m +CONFIG_NF_NAT_H323=m +CONFIG_NF_NAT_SIP=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m CONFIG_IP_NF_TARGET_TTL=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_RAW=m @@ -439,6 +480,7 @@ CONFIG_IP_NF_ARP_MANGLE=m # # IPv6: Netfilter Configuration (EXPERIMENTAL) # +CONFIG_NF_CONNTRACK_IPV6=m CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_RT=m @@ -448,6 +490,7 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_OWNER=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_LOG=m @@ -484,7 +527,6 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -CONFIG_NET_DIVERT=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -492,6 +534,7 @@ CONFIG_NET_DIVERT=y # QoS and/or fair queueing # CONFIG_NET_SCHED=y +CONFIG_NET_SCH_FIFO=y # CONFIG_NET_SCH_CLK_JIFFIES is not set CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y # CONFIG_NET_SCH_CLK_CPU is not set @@ -546,6 +589,7 @@ CONFIG_IEEE80211_CRYPT_CCMP=m CONFIG_IEEE80211_SOFTMAC=m # CONFIG_IEEE80211_SOFTMAC_DEBUG is not set CONFIG_WIRELESS_EXT=y +CONFIG_FIB_RULES=y # # Device Drivers @@ -556,7 +600,6 @@ CONFIG_WIRELESS_EXT=y # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set # CONFIG_SYS_HYPERVISOR is not set # @@ -591,6 +634,10 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m +# +# Misc devices +# + # # ATA/ATAPI/MFM/RLL support # @@ -601,6 +648,8 @@ CONFIG_ATA_OVER_ETH=m # CONFIG_RAID_ATTRS=m CONFIG_SCSI=y +CONFIG_SCSI_TGT=m +# CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y # @@ -620,23 +669,29 @@ CONFIG_CHR_DEV_SCH=m # CONFIG_SCSI_MULTI_LUN is not set CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_LOGGING is not set +CONFIG_SCSI_SCAN_ASYNC=y # -# SCSI Transport Attributes +# SCSI Transports # CONFIG_SCSI_SPI_ATTRS=m # CONFIG_SCSI_FC_ATTRS is not set CONFIG_SCSI_ISCSI_ATTRS=m CONFIG_SCSI_SAS_ATTRS=m +# CONFIG_SCSI_SAS_LIBSAS is not set # # SCSI low-level drivers # CONFIG_ISCSI_TCP=m CONFIG_SGIWD93_SCSI=y -# CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DEBUG is not set +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set + # # Multi-device support (RAID and LVM) # @@ -679,6 +734,8 @@ CONFIG_LXT_PHY=m CONFIG_CICADA_PHY=m # CONFIG_VITESSE_PHY is not set # CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set # # Ethernet (10 or 100Mbit) @@ -730,6 +787,7 @@ CONFIG_SGISEEQ=y # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces @@ -752,6 +810,7 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=m CONFIG_MOUSE_SERIAL=m @@ -815,10 +874,6 @@ CONFIG_SGI_DS1286=m # CONFIG_GEN_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# CONFIG_RAW_DRIVER=m CONFIG_MAX_RAW_DEVS=256 @@ -826,7 +881,6 @@ CONFIG_MAX_RAW_DEVS=256 # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -850,15 +904,10 @@ CONFIG_MAX_RAW_DEVS=256 # CONFIG_HWMON is not set # CONFIG_HWMON_VID is not set -# -# Misc devices -# - # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -887,12 +936,19 @@ CONFIG_LOGO=y # CONFIG_LOGO_LINUX_VGA16 is not set # CONFIG_LOGO_LINUX_CLUT224 is not set CONFIG_LOGO_SGI_CLUT224=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set +# +# HID Devices +# +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + # # USB support # @@ -953,6 +1009,14 @@ CONFIG_LOGO_SGI_CLUT224=y # DMA Devices # +# +# Auxiliary Display support +# + +# +# Virtualization +# + # # File systems # @@ -963,6 +1027,7 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y +# CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y @@ -974,6 +1039,7 @@ CONFIG_XFS_QUOTA=y CONFIG_XFS_SECURITY=y # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_MINIX_FS=m # CONFIG_ROMFS_FS is not set @@ -987,6 +1053,7 @@ CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_GENERIC_ACL=y # # CD-ROM/DVD Filesystems @@ -994,7 +1061,6 @@ CONFIG_FUSE_FS=m CONFIG_ISO9660_FS=m CONFIG_JOLIET=y CONFIG_ZISOFS=y -CONFIG_ZISOFS_FS=m CONFIG_UDF_FS=m CONFIG_UDF_NLS=y @@ -1013,17 +1079,20 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set +CONFIG_CONFIGFS_FS=m # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set @@ -1141,6 +1210,14 @@ CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m +# +# Distributed Lock Manager +# +CONFIG_DLM=m +CONFIG_DLM_TCP=y +# CONFIG_DLM_SCTP is not set +# CONFIG_DLM_DEBUG is not set + # # Profiling support # @@ -1151,11 +1228,13 @@ CONFIG_NLS_UTF8=m # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" @@ -1170,18 +1249,30 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y # Cryptographic options # CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_CAST5=m @@ -1193,6 +1284,7 @@ CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_CAMELLIA=m # CONFIG_CRYPTO_TEST is not set # @@ -1202,6 +1294,7 @@ CONFIG_CRYPTO_CRC32C=m # # Library routines # +CONFIG_BITREVERSE=m # CONFIG_CRC_CCITT is not set CONFIG_CRC16=m CONFIG_CRC32=m @@ -1213,3 +1306,5 @@ CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig index f21186c12d81..7b2f5f8397a2 100644 --- a/arch/mips/configs/ip27_defconfig +++ b/arch/mips/configs/ip27_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc1 -# Thu Jul 6 10:04:10 2006 +# Linux kernel version: 2.6.20 +# Sun Feb 18 21:27:49 2007 # CONFIG_MIPS=y # # Machine selection # +CONFIG_ZONE_DMA=y # CONFIG_MIPS_MTX1 is not set # CONFIG_MIPS_BOSPORUS is not set # CONFIG_MIPS_PB1000 is not set @@ -25,8 +26,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_IVR is not set -# CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set @@ -42,6 +41,7 @@ CONFIG_MIPS=y # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_V2PCI is not set # CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set # CONFIG_DDB5477 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set @@ -70,10 +70,14 @@ CONFIG_SGI_SN_M_MODE=y # CONFIG_REPLICATE_EXHANDLERS is not set CONFIG_EARLY_PRINTK=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_ARC=y CONFIG_DMA_IP27=y CONFIG_CPU_BIG_ENDIAN=y @@ -121,8 +125,8 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_64KB is not set CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y @@ -145,8 +149,10 @@ CONFIG_NEED_MULTIPLE_NODES=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y +CONFIG_ZONE_DMA_FLAG=1 CONFIG_SMP=y CONFIG_SYS_SUPPORTS_SMP=y +CONFIG_NR_CPUS_DEFAULT_64=y CONFIG_NR_CPUS=64 # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set @@ -162,6 +168,7 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT is not set CONFIG_PREEMPT_BKL=y # CONFIG_MIPS_INSANE_LARGE is not set +# CONFIG_KEXEC is not set CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -180,17 +187,22 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_CPUSETS=y +CONFIG_SYSFS_DEPRECATED=y CONFIG_RELAY=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -198,12 +210,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y -CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -222,6 +234,7 @@ CONFIG_STOP_MACHINE=y # # Block layer # +CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # @@ -263,10 +276,19 @@ CONFIG_BINFMT_ELF=y # CONFIG_BUILD_ELF64 is not set CONFIG_MIPS32_COMPAT=y CONFIG_COMPAT=y +CONFIG_SYSVIPC_COMPAT=y CONFIG_MIPS32_O32=y CONFIG_MIPS32_N32=y CONFIG_BINFMT_ELF32=y +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set + # # Networking # @@ -281,7 +303,10 @@ CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=m +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set @@ -302,10 +327,13 @@ CONFIG_IP_PNP=y # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_TCP_MD5SIG=y # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set @@ -335,7 +363,6 @@ CONFIG_NETWORK_SECMARK=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -343,6 +370,7 @@ CONFIG_NETWORK_SECMARK=y # QoS and/or fair queueing # CONFIG_NET_SCHED=y +CONFIG_NET_SCH_FIFO=y # CONFIG_NET_SCH_CLK_JIFFIES is not set CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y # CONFIG_NET_SCH_CLK_CPU is not set @@ -374,6 +402,7 @@ CONFIG_NET_CLS_ROUTE=y CONFIG_NET_CLS_FW=m CONFIG_NET_CLS_U32=m # CONFIG_CLS_U32_PERF is not set +CONFIG_CLS_U32_MARK=y CONFIG_NET_CLS_RSVP=m CONFIG_NET_CLS_RSVP6=m # CONFIG_NET_EMATCH is not set @@ -447,6 +476,12 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m +# +# Misc devices +# +CONFIG_SGI_IOC4=m +# CONFIG_TIFM_CORE is not set + # # ATA/ATAPI/MFM/RLL support # @@ -457,6 +492,8 @@ CONFIG_ATA_OVER_ETH=m # CONFIG_RAID_ATTRS=m CONFIG_SCSI=y +CONFIG_SCSI_TGT=m +CONFIG_SCSI_NETLINK=y CONFIG_SCSI_PROC_FS=y # @@ -476,14 +513,17 @@ CONFIG_CHR_DEV_SCH=m # CONFIG_SCSI_MULTI_LUN is not set CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y +CONFIG_SCSI_SCAN_ASYNC=y # -# SCSI Transport Attributes +# SCSI Transports # CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_FC_ATTRS=y CONFIG_SCSI_ISCSI_ATTRS=m CONFIG_SCSI_SAS_ATTRS=m +CONFIG_SCSI_SAS_LIBSAS=m +# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set # # SCSI low-level drivers @@ -496,24 +536,33 @@ CONFIG_SCSI_SAS_ATTRS=m # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set +CONFIG_SCSI_AIC94XX=m +# CONFIG_AIC94XX_DEBUG is not set +# CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_SATA is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set CONFIG_SCSI_QLOGIC_1280=y # CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set # # Multi-device support (RAID and LVM) @@ -529,6 +578,7 @@ CONFIG_MD_RAID5_RESHAPE=y CONFIG_MD_MULTIPATH=m CONFIG_MD_FAULTY=m CONFIG_BLK_DEV_DM=m +# CONFIG_DM_DEBUG is not set CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m @@ -583,6 +633,8 @@ CONFIG_LXT_PHY=m CONFIG_CICADA_PHY=m CONFIG_VITESSE_PHY=m CONFIG_SMSC_PHY=m +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set # # Ethernet (10 or 100Mbit) @@ -619,14 +671,17 @@ CONFIG_SGI_IOC3_ETH=y # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_QLA3XXX=m # # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3=m # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set +CONFIG_NETXEN_NIC=m # # Token Ring devices @@ -724,10 +779,6 @@ CONFIG_SGI_IP27_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set @@ -735,7 +786,6 @@ CONFIG_SGI_IP27_RTC=y # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -759,15 +809,10 @@ CONFIG_SGI_IP27_RTC=y # CONFIG_HWMON is not set # CONFIG_HWMON_VID is not set -# -# Misc devices -# - # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -779,6 +824,7 @@ CONFIG_VIDEO_V4L2=y # # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -847,6 +893,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y # DMA Devices # +# +# Auxiliary Display support +# + +# +# Virtualization +# + # # File systems # @@ -859,6 +913,7 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y +# CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y CONFIG_JBD_DEBUG=y CONFIG_FS_MBCACHE=y @@ -870,6 +925,7 @@ CONFIG_XFS_QUOTA=y CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y # CONFIG_XFS_RT is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -881,6 +937,7 @@ CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=m # CONFIG_AUTOFS4_FS is not set CONFIG_FUSE_FS=m +CONFIG_GENERIC_ACL=y # # CD-ROM/DVD Filesystems @@ -900,17 +957,20 @@ CONFIG_FUSE_FS=m # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set +CONFIG_CONFIGFS_FS=m # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set @@ -942,7 +1002,6 @@ CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set -# CONFIG_CIFS_DEBUG2 is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -974,6 +1033,14 @@ CONFIG_SGI_PARTITION=y # # CONFIG_NLS is not set +# +# Distributed Lock Manager +# +CONFIG_DLM=m +CONFIG_DLM_TCP=y +# CONFIG_DLM_SCTP is not set +# CONFIG_DLM_DEBUG is not set + # # Profiling support # @@ -984,11 +1051,13 @@ CONFIG_SGI_PARTITION=y # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=15 -# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" @@ -1003,7 +1072,12 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y # Cryptographic options # CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y @@ -1012,9 +1086,16 @@ CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_CAST5=m @@ -1026,6 +1107,7 @@ CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_CAMELLIA=m # CONFIG_CRYPTO_TEST is not set # @@ -1035,6 +1117,7 @@ CONFIG_CRYPTO_CRC32C=m # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set CONFIG_CRC16=m CONFIG_CRC32=y @@ -1042,3 +1125,5 @@ CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/ip32_defconfig b/arch/mips/configs/ip32_defconfig index 61e069a0f1aa..14398e8a1768 100644 --- a/arch/mips/configs/ip32_defconfig +++ b/arch/mips/configs/ip32_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc1 -# Thu Jul 6 10:04:11 2006 +# Linux kernel version: 2.6.20 +# Sun Feb 18 21:27:50 2007 # CONFIG_MIPS=y # # Machine selection # +CONFIG_ZONE_DMA=y # CONFIG_MIPS_MTX1 is not set # CONFIG_MIPS_BOSPORUS is not set # CONFIG_MIPS_PB1000 is not set @@ -25,8 +26,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_IVR is not set -# CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set @@ -42,6 +41,7 @@ CONFIG_MIPS=y # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_V2PCI is not set # CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set # CONFIG_DDB5477 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set @@ -64,15 +64,17 @@ CONFIG_SGI_IP32=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set CONFIG_ARC=y -CONFIG_DMA_IP32=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y -CONFIG_OWN_DMA=y CONFIG_CPU_BIG_ENDIAN=y # CONFIG_CPU_LITTLE_ENDIAN is not set CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y @@ -124,8 +126,8 @@ CONFIG_BOARD_SCACHE=y CONFIG_R5000_CPU_SCACHE=y CONFIG_RM7000_CPU_SCACHE=y CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y @@ -141,6 +143,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y +CONFIG_ZONE_DMA_FLAG=1 # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -153,6 +156,7 @@ CONFIG_HZ=1000 # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set +# CONFIG_KEXEC is not set CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -171,16 +175,21 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y CONFIG_RELAY=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -188,12 +197,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y -CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -206,6 +215,7 @@ CONFIG_BASE_SMALL=0 # # Block layer # +CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # @@ -246,10 +256,19 @@ CONFIG_BINFMT_MISC=y # CONFIG_BUILD_ELF64 is not set CONFIG_MIPS32_COMPAT=y CONFIG_COMPAT=y +CONFIG_SYSVIPC_COMPAT=y CONFIG_MIPS32_O32=y # CONFIG_MIPS32_N32 is not set CONFIG_BINFMT_ELF32=y +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set + # # Networking # @@ -264,7 +283,10 @@ CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=y +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set @@ -284,10 +306,13 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_TCP_MD5SIG=y # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set @@ -317,7 +342,6 @@ CONFIG_NETWORK_SECMARK=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -392,6 +416,12 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=y +# +# Misc devices +# +CONFIG_SGI_IOC4=y +# CONFIG_TIFM_CORE is not set + # # ATA/ATAPI/MFM/RLL support # @@ -402,6 +432,8 @@ CONFIG_ATA_OVER_ETH=y # CONFIG_RAID_ATTRS=y CONFIG_SCSI=y +CONFIG_SCSI_TGT=y +CONFIG_SCSI_NETLINK=y CONFIG_SCSI_PROC_FS=y # @@ -421,14 +453,17 @@ CONFIG_CHR_DEV_SG=y CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y +CONFIG_SCSI_SCAN_ASYNC=y # -# SCSI Transport Attributes +# SCSI Transports # CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_ISCSI_ATTRS is not set CONFIG_SCSI_SAS_ATTRS=y +CONFIG_SCSI_SAS_LIBSAS=y +# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set # # SCSI low-level drivers @@ -446,24 +481,33 @@ CONFIG_AIC7XXX_DEBUG_MASK=0 CONFIG_AIC7XXX_REG_PRETTY_PRINT=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set +CONFIG_SCSI_AIC94XX=y +# CONFIG_AIC94XX_DEBUG is not set +# CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_SATA is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set # # Multi-device support (RAID and LVM) @@ -517,6 +561,8 @@ CONFIG_LXT_PHY=y CONFIG_CICADA_PHY=y CONFIG_VITESSE_PHY=y CONFIG_SMSC_PHY=y +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set # # Ethernet (10 or 100Mbit) @@ -553,14 +599,17 @@ CONFIG_SGI_O2MACE_ETH=y # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_QLA3XXX=y # # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3=y # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set +CONFIG_NETXEN_NIC=y # # Token Ring devices @@ -600,6 +649,7 @@ CONFIG_SGI_O2MACE_ETH=y # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces @@ -678,10 +728,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set @@ -689,7 +735,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -713,15 +758,10 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HWMON is not set # CONFIG_HWMON_VID is not set -# -# Misc devices -# - # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -739,12 +779,19 @@ CONFIG_VIDEO_V4L2=y # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set +# +# HID Devices +# +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + # # USB support # @@ -807,6 +854,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y # DMA Devices # +# +# Auxiliary Display support +# + +# +# Virtualization +# + # # File systems # @@ -814,10 +869,12 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set +CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -828,6 +885,7 @@ CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set CONFIG_FUSE_FS=y +CONFIG_GENERIC_ACL=y # # CD-ROM/DVD Filesystems @@ -847,17 +905,20 @@ CONFIG_FUSE_FS=y # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set +CONFIG_CONFIGFS_FS=y # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set @@ -888,7 +949,6 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set -# CONFIG_CIFS_DEBUG2 is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -916,6 +976,14 @@ CONFIG_SGI_PARTITION=y # # CONFIG_NLS is not set +# +# Distributed Lock Manager +# +CONFIG_DLM=y +CONFIG_DLM_TCP=y +# CONFIG_DLM_SCTP is not set +# CONFIG_DLM_DEBUG is not set + # # Profiling support # @@ -926,12 +994,13 @@ CONFIG_SGI_PARTITION=y # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_FS is not set -# CONFIG_UNWIND_INFO is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" @@ -946,7 +1015,12 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y # Cryptographic options # CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=y CONFIG_CRYPTO_NULL=y CONFIG_CRYPTO_MD4=y CONFIG_CRYPTO_MD5=y @@ -955,9 +1029,16 @@ CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y CONFIG_CRYPTO_WP512=y CONFIG_CRYPTO_TGR192=y +CONFIG_CRYPTO_GF128MUL=y +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=y +CONFIG_CRYPTO_LRW=y CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_FCRYPT=y CONFIG_CRYPTO_BLOWFISH=y CONFIG_CRYPTO_TWOFISH=y +CONFIG_CRYPTO_TWOFISH_COMMON=y CONFIG_CRYPTO_SERPENT=y CONFIG_CRYPTO_AES=y CONFIG_CRYPTO_CAST5=y @@ -969,6 +1050,7 @@ CONFIG_CRYPTO_ANUBIS=y CONFIG_CRYPTO_DEFLATE=y CONFIG_CRYPTO_MICHAEL_MIC=y CONFIG_CRYPTO_CRC32C=y +CONFIG_CRYPTO_CAMELLIA=y # # Hardware crypto devices @@ -977,6 +1059,7 @@ CONFIG_CRYPTO_CRC32C=y # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set CONFIG_CRC16=y CONFIG_CRC32=y @@ -984,3 +1067,5 @@ CONFIG_LIBCRC32C=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/jaguar-atx_defconfig b/arch/mips/configs/jaguar-atx_defconfig index 88966666f4c6..b38978794a5a 100644 --- a/arch/mips/configs/jaguar-atx_defconfig +++ b/arch/mips/configs/jaguar-atx_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc1 -# Thu Jul 6 10:04:12 2006 +# Linux kernel version: 2.6.20 +# Sun Feb 18 21:27:51 2007 # CONFIG_MIPS=y # # Machine selection # +CONFIG_ZONE_DMA=y # CONFIG_MIPS_MTX1 is not set # CONFIG_MIPS_BOSPORUS is not set # CONFIG_MIPS_PB1000 is not set @@ -25,8 +26,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_IVR is not set -# CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set @@ -42,6 +41,7 @@ CONFIG_MOMENCO_JAGUAR_ATX=y # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_V2PCI is not set # CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set # CONFIG_DDB5477 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set @@ -65,10 +65,14 @@ CONFIG_MOMENCO_JAGUAR_ATX=y # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_JAGUAR_DMALOW=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_LIMITED_DMA=y @@ -106,6 +110,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 CONFIG_CPU_RM9000=y # CONFIG_CPU_SB1 is not set CONFIG_SYS_HAS_CPU_RM9000=y +CONFIG_WEAK_ORDERING=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y @@ -124,8 +129,8 @@ CONFIG_BOARD_SCACHE=y CONFIG_RM7000_CPU_SCACHE=y CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set # CONFIG_64BIT_PHYS_ADDR is not set CONFIG_CPU_HAS_LLSC=y @@ -141,6 +146,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -171,14 +177,19 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_SYSFS_DEPRECATED=y CONFIG_RELAY=y -CONFIG_INITRAMFS_SOURCE="" +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -186,12 +197,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y -CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -208,6 +219,7 @@ CONFIG_KMOD=y # # Block layer # +CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set @@ -248,6 +260,14 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_TRAD_SIGNALS=y +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set + # # Networking # @@ -277,13 +297,15 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set +CONFIG_INET_TUNNEL=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y @@ -294,6 +316,8 @@ CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m CONFIG_INET6_XFRM_MODE_TRANSPORT=m CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +CONFIG_IPV6_SIT=m CONFIG_IPV6_TUNNEL=m CONFIG_NETWORK_SECMARK=y # CONFIG_NETFILTER is not set @@ -368,6 +392,11 @@ CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_ATA_OVER_ETH=m +# +# Misc devices +# +CONFIG_SGI_IOC4=m + # # ATA/ATAPI/MFM/RLL support # @@ -378,6 +407,12 @@ CONFIG_ATA_OVER_ETH=m # CONFIG_RAID_ATTRS=m # CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set # # Multi-device support (RAID and LVM) @@ -428,6 +463,8 @@ CONFIG_LXT_PHY=m CONFIG_CICADA_PHY=m CONFIG_VITESSE_PHY=m CONFIG_SMSC_PHY=m +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set # # Ethernet (10 or 100Mbit) @@ -475,6 +512,7 @@ CONFIG_EEPRO100=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set @@ -483,14 +521,17 @@ CONFIG_MV643XX_ETH=y CONFIG_MV643XX_ETH_0=y CONFIG_MV643XX_ETH_1=y CONFIG_MV643XX_ETH_2=y +CONFIG_QLA3XXX=m # # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3=m # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set +CONFIG_NETXEN_NIC=m # # Token Ring devices @@ -574,10 +615,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set @@ -607,15 +644,10 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HWMON is not set # CONFIG_HWMON_VID is not set -# -# Misc devices -# - # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -627,6 +659,7 @@ CONFIG_VIDEO_V4L2=y # # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -694,6 +727,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y # DMA Devices # +# +# Auxiliary Display support +# + +# +# Virtualization +# + # # File systems # @@ -701,8 +742,9 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_EXT3_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set +CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -712,6 +754,7 @@ CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set CONFIG_FUSE_FS=m +CONFIG_GENERIC_ACL=y # # CD-ROM/DVD Filesystems @@ -731,8 +774,10 @@ CONFIG_FUSE_FS=m # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y @@ -752,6 +797,7 @@ CONFIG_RAMFS=y # CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set +# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -759,7 +805,6 @@ CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set -# CONFIG_CIFS_DEBUG2 is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -779,11 +824,13 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" @@ -798,6 +845,10 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y # Cryptographic options # CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_MD4=m @@ -807,9 +858,14 @@ CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_CAST5=m @@ -821,6 +877,7 @@ CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_CAMELLIA=m # CONFIG_CRYPTO_TEST is not set # @@ -830,6 +887,7 @@ CONFIG_CRYPTO_CRC32C=m # # Library routines # +CONFIG_BITREVERSE=m # CONFIG_CRC_CCITT is not set CONFIG_CRC16=m CONFIG_CRC32=m @@ -837,3 +895,5 @@ CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/jazz_defconfig b/arch/mips/configs/jazz_defconfig index 835764d834f7..dacf0a618d57 100644 --- a/arch/mips/configs/jazz_defconfig +++ b/arch/mips/configs/jazz_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.19-rc1 -# Sun Oct 8 19:03:07 2006 +# Linux kernel version: 2.6.20 +# Sun Feb 18 21:27:52 2007 # CONFIG_MIPS=y # # Machine selection # +CONFIG_ZONE_DMA=y # CONFIG_MIPS_MTX1 is not set # CONFIG_MIPS_BOSPORUS is not set # CONFIG_MIPS_PB1000 is not set @@ -40,6 +41,7 @@ CONFIG_MACH_JAZZ=y # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_V2PCI is not set # CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set # CONFIG_DDB5477 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set @@ -65,11 +67,14 @@ CONFIG_MACH_JAZZ=y # CONFIG_MIPS_MAGNUM_4000 is not set CONFIG_OLIVETTI_M700=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_ARC=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_DMA_NONCOHERENT=y @@ -140,6 +145,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 # CONFIG_HZ_48 is not set CONFIG_HZ_100=y # CONFIG_HZ_128 is not set @@ -152,6 +158,7 @@ CONFIG_HZ=100 # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set +# CONFIG_KEXEC is not set CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -171,6 +178,7 @@ CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set @@ -179,8 +187,8 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_SYSFS_DEPRECATED=y CONFIG_RELAY=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y @@ -256,6 +264,14 @@ CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m CONFIG_TRAD_SIGNALS=y +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set + # # Networking # @@ -271,7 +287,9 @@ CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=m +CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set @@ -298,6 +316,7 @@ CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_TCP_MD5SIG=y # # IP: Virtual Server Configuration @@ -317,8 +336,8 @@ CONFIG_INET6_XFRM_MODE_TRANSPORT=m CONFIG_INET6_XFRM_MODE_TUNNEL=m CONFIG_INET6_XFRM_MODE_BEET=m # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m CONFIG_IPV6_TUNNEL=m -# CONFIG_IPV6_SUBTREES is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set CONFIG_NETWORK_SECMARK=y CONFIG_NETFILTER=y @@ -331,16 +350,39 @@ CONFIG_BRIDGE_NETFILTER=y CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NF_CONNTRACK_ENABLED=m +CONFIG_NF_CONNTRACK_SUPPORT=y +# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CT_ACCT=y +CONFIG_NF_CONNTRACK_MARK=y +CONFIG_NF_CONNTRACK_SECMARK=y +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m # CONFIG_NETFILTER_XT_TARGET_DSCP is not set CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NOTRACK=m CONFIG_NETFILTER_XT_TARGET_SECMARK=m # CONFIG_NETFILTER_XT_TARGET_CONNSECMARK is not set +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_DCCP=m @@ -362,25 +404,13 @@ CONFIG_NETFILTER_XT_MATCH_STATE=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m # # IP: Netfilter Configuration # -CONFIG_IP_NF_CONNTRACK=m -# CONFIG_IP_NF_CT_ACCT is not set -CONFIG_IP_NF_CONNTRACK_MARK=y -CONFIG_IP_NF_CONNTRACK_SECMARK=y -CONFIG_IP_NF_CONNTRACK_EVENTS=y -CONFIG_IP_NF_CONNTRACK_NETLINK=m -CONFIG_IP_NF_CT_PROTO_SCTP=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -# CONFIG_IP_NF_NETBIOS_NS is not set -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m -CONFIG_IP_NF_PPTP=m -CONFIG_IP_NF_H323=m -CONFIG_IP_NF_SIP=m +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_IPRANGE=m @@ -391,26 +421,25 @@ CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_MATCH_OWNER=m CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_NAT_PPTP=m -CONFIG_IP_NF_NAT_H323=m -CONFIG_IP_NF_NAT_SIP=m +CONFIG_NF_NAT_SNMP_BASIC=m +CONFIG_NF_NAT_PROTO_GRE=m +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +CONFIG_NF_NAT_TFTP=m +CONFIG_NF_NAT_AMANDA=m +CONFIG_NF_NAT_PPTP=m +CONFIG_NF_NAT_H323=m +CONFIG_NF_NAT_SIP=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m @@ -424,6 +453,7 @@ CONFIG_IP_NF_ARP_MANGLE=m # # IPv6: Netfilter Configuration (EXPERIMENTAL) # +CONFIG_NF_CONNTRACK_IPV6=m CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_RT=m @@ -433,6 +463,7 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_OWNER=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_LOG=m @@ -502,6 +533,7 @@ CONFIG_LLC=m # QoS and/or fair queueing # CONFIG_NET_SCHED=y +CONFIG_NET_SCH_FIFO=y CONFIG_NET_SCH_CLK_JIFFIES=y # CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set # CONFIG_NET_SCH_CLK_CPU is not set @@ -620,7 +652,6 @@ CONFIG_PARPORT_1284=y # CONFIG_BLK_DEV_FD=m CONFIG_PARIDE=m -CONFIG_PARIDE_PARPORT=m # # Parallel IDE high-level drivers @@ -664,6 +695,10 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m +# +# Misc devices +# + # # ATA/ATAPI/MFM/RLL support # @@ -674,6 +709,7 @@ CONFIG_ATA_OVER_ETH=m # CONFIG_RAID_ATTRS=m CONFIG_SCSI=y +CONFIG_SCSI_TGT=m CONFIG_SCSI_NETLINK=y CONFIG_SCSI_PROC_FS=y @@ -694,6 +730,7 @@ CONFIG_BLK_DEV_SR_VENDOR=y # CONFIG_SCSI_MULTI_LUN is not set CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_LOGGING is not set +CONFIG_SCSI_SCAN_ASYNC=y # # SCSI Transports @@ -802,6 +839,7 @@ CONFIG_LXT_PHY=m CONFIG_CICADA_PHY=m CONFIG_VITESSE_PHY=m CONFIG_SMSC_PHY=m +# CONFIG_BROADCOM_PHY is not set # CONFIG_FIXED_PHY is not set # @@ -832,7 +870,6 @@ CONFIG_NET_PCI=y # CONFIG_AC3200 is not set # CONFIG_APRICOT is not set # CONFIG_CS89x0 is not set -# CONFIG_LAN_SAA9730 is not set # CONFIG_NET_POCKET is not set # @@ -972,17 +1009,12 @@ CONFIG_RTC=m # CONFIG_GEN_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_RAW_DRIVER is not set # # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -1018,11 +1050,6 @@ CONFIG_W1_CON=y # CONFIG_HWMON is not set # CONFIG_HWMON_VID is not set -# -# Misc devices -# -# CONFIG_TIFM_CORE is not set - # # Multimedia devices # @@ -1053,6 +1080,12 @@ CONFIG_DUMMY_CONSOLE=y # # CONFIG_SOUND is not set +# +# HID Devices +# +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + # # USB support # @@ -1113,6 +1146,15 @@ CONFIG_DUMMY_CONSOLE=y # DMA Devices # +# +# Auxiliary Display support +# +# CONFIG_KS0108 is not set + +# +# Virtualization +# + # # File systems # @@ -1123,6 +1165,7 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y @@ -1158,7 +1201,6 @@ CONFIG_FUSE_FS=m CONFIG_ISO9660_FS=m CONFIG_JOLIET=y CONFIG_ZISOFS=y -CONFIG_ZISOFS_FS=m CONFIG_UDF_FS=m CONFIG_UDF_NLS=y @@ -1185,7 +1227,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set +CONFIG_CONFIGFS_FS=m # # Miscellaneous filesystems @@ -1321,6 +1363,10 @@ CONFIG_NLS_UTF8=m # # Distributed Lock Manager # +CONFIG_DLM=m +CONFIG_DLM_TCP=y +# CONFIG_DLM_SCTP is not set +# CONFIG_DLM_DEBUG is not set # # Profiling support @@ -1335,9 +1381,10 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" @@ -1355,19 +1402,24 @@ CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=m CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_TWOFISH_COMMON=m @@ -1382,6 +1434,7 @@ CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_CAMELLIA=m # CONFIG_CRYPTO_TEST is not set # @@ -1391,6 +1444,7 @@ CONFIG_CRYPTO_CRC32C=m # # Library routines # +CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC32=y @@ -1402,3 +1456,5 @@ CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/jmr3927_defconfig b/arch/mips/configs/jmr3927_defconfig index 50fd9557e646..29ed772455f1 100644 --- a/arch/mips/configs/jmr3927_defconfig +++ b/arch/mips/configs/jmr3927_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc1 -# Thu Jul 6 10:04:12 2006 +# Linux kernel version: 2.6.20 +# Sun Feb 18 21:27:53 2007 # CONFIG_MIPS=y # # Machine selection # +CONFIG_ZONE_DMA=y # CONFIG_MIPS_MTX1 is not set # CONFIG_MIPS_BOSPORUS is not set # CONFIG_MIPS_PB1000 is not set @@ -25,8 +26,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_IVR is not set -# CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set @@ -42,6 +41,7 @@ CONFIG_MIPS=y # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_V2PCI is not set # CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set # CONFIG_DDB5477 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set @@ -64,15 +64,20 @@ CONFIG_TOSHIBA_JMR3927=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_CPU_BIG_ENDIAN=y # CONFIG_CPU_LITTLE_ENDIAN is not set CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y +CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y CONFIG_MIPS_TX3927=y CONFIG_SWAP_IO_SPACE=y CONFIG_MIPS_L1_CACHE_SHIFT=5 @@ -114,8 +119,8 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y @@ -130,6 +135,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -143,6 +149,7 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_RTC_DS1742=y +# CONFIG_KEXEC is not set CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -161,15 +168,20 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y CONFIG_RELAY=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -177,12 +189,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y -CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -195,6 +207,7 @@ CONFIG_BASE_SMALL=0 # # Block layer # +CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set @@ -236,6 +249,14 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_TRAD_SIGNALS=y +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set + # # Networking # @@ -250,7 +271,10 @@ CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=y +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set @@ -270,10 +294,13 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_TCP_MD5SIG=y # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set @@ -303,7 +330,6 @@ CONFIG_NETWORK_SECMARK=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -377,6 +403,12 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=y +# +# Misc devices +# +CONFIG_SGI_IOC4=y +# CONFIG_TIFM_CORE is not set + # # ATA/ATAPI/MFM/RLL support # @@ -387,6 +419,12 @@ CONFIG_ATA_OVER_ETH=y # CONFIG_RAID_ATTRS=y # CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set # # Multi-device support (RAID and LVM) @@ -437,6 +475,8 @@ CONFIG_LXT_PHY=y CONFIG_CICADA_PHY=y CONFIG_VITESSE_PHY=y CONFIG_SMSC_PHY=y +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set # # Ethernet (10 or 100Mbit) @@ -472,14 +512,17 @@ CONFIG_NET_ETHERNET=y # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_QLA3XXX=y # # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3=y # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set +CONFIG_NETXEN_NIC=y # # Token Ring devices @@ -518,6 +561,7 @@ CONFIG_NET_ETHERNET=y # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces @@ -565,6 +609,7 @@ CONFIG_SERIAL_NONSTANDARD=y # CONFIG_DIGIEPCA is not set # CONFIG_MOXA_INTELLIO is not set # CONFIG_MOXA_SMARTIO is not set +CONFIG_MOXA_SMARTIO_NEW=y # CONFIG_ISI is not set # CONFIG_SYNCLINKMP is not set # CONFIG_SYNCLINK_GT is not set @@ -586,6 +631,7 @@ CONFIG_SERIAL_NONSTANDARD=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_TXX9=y CONFIG_HAS_TXX9_SERIAL=y +CONFIG_SERIAL_TXX9_NR_UARTS=6 # CONFIG_SERIAL_TXX9_CONSOLE is not set # CONFIG_SERIAL_TXX9_STDSERIAL is not set # CONFIG_SERIAL_JSM is not set @@ -608,10 +654,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set @@ -619,7 +661,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -643,15 +684,10 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HWMON is not set # CONFIG_HWMON_VID is not set -# -# Misc devices -# - # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -666,6 +702,7 @@ CONFIG_FB=y # CONFIG_FB_CFB_FILLRECT is not set # CONFIG_FB_CFB_COPYAREA is not set # CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set # CONFIG_FB_MODE_HELPERS is not set @@ -682,6 +719,7 @@ CONFIG_FB=y # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set # CONFIG_FB_NEOMAGIC is not set @@ -710,6 +748,11 @@ CONFIG_DUMMY_CONSOLE=y # # CONFIG_SOUND is not set +# +# HID Devices +# +# CONFIG_HID is not set + # # USB support # @@ -772,15 +815,25 @@ CONFIG_USB_ARCH_HAS_EHCI=y # DMA Devices # +# +# Auxiliary Display support +# + +# +# Virtualization +# + # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -810,17 +863,19 @@ CONFIG_FUSE_FS=y # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set +CONFIG_CONFIGFS_FS=y # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set @@ -849,7 +904,6 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set -# CONFIG_CIFS_DEBUG2 is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -866,6 +920,14 @@ CONFIG_MSDOS_PARTITION=y # # CONFIG_NLS is not set +# +# Distributed Lock Manager +# +CONFIG_DLM=y +CONFIG_DLM_TCP=y +# CONFIG_DLM_SCTP is not set +# CONFIG_DLM_DEBUG is not set + # # Profiling support # @@ -876,12 +938,13 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_FS is not set -# CONFIG_UNWIND_INFO is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" @@ -896,7 +959,12 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y # Cryptographic options # CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=y CONFIG_CRYPTO_NULL=y CONFIG_CRYPTO_MD4=y CONFIG_CRYPTO_MD5=y @@ -905,9 +973,16 @@ CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y CONFIG_CRYPTO_WP512=y CONFIG_CRYPTO_TGR192=y +CONFIG_CRYPTO_GF128MUL=y +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=y +CONFIG_CRYPTO_LRW=y CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_FCRYPT=y CONFIG_CRYPTO_BLOWFISH=y CONFIG_CRYPTO_TWOFISH=y +CONFIG_CRYPTO_TWOFISH_COMMON=y CONFIG_CRYPTO_SERPENT=y CONFIG_CRYPTO_AES=y CONFIG_CRYPTO_CAST5=y @@ -919,6 +994,7 @@ CONFIG_CRYPTO_ANUBIS=y CONFIG_CRYPTO_DEFLATE=y CONFIG_CRYPTO_MICHAEL_MIC=y CONFIG_CRYPTO_CRC32C=y +CONFIG_CRYPTO_CAMELLIA=y # # Hardware crypto devices @@ -927,6 +1003,7 @@ CONFIG_CRYPTO_CRC32C=y # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set CONFIG_CRC16=y CONFIG_CRC32=y @@ -934,3 +1011,5 @@ CONFIG_LIBCRC32C=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/lasat200_defconfig b/arch/mips/configs/lasat200_defconfig index 05f539f84f58..a1437b34e18f 100644 --- a/arch/mips/configs/lasat200_defconfig +++ b/arch/mips/configs/lasat200_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc1 -# Thu Jul 6 10:04:12 2006 +# Linux kernel version: 2.6.20 +# Sun Feb 18 21:27:54 2007 # CONFIG_MIPS=y # # Machine selection # +CONFIG_ZONE_DMA=y # CONFIG_MIPS_MTX1 is not set # CONFIG_MIPS_BOSPORUS is not set # CONFIG_MIPS_PB1000 is not set @@ -25,8 +26,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_IVR is not set -# CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set CONFIG_LASAT=y # CONFIG_MIPS_ATLAS is not set @@ -42,6 +41,7 @@ CONFIG_LASAT=y # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_V2PCI is not set # CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set # CONFIG_DDB5477 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set @@ -68,10 +68,14 @@ CONFIG_PICVUE_PROC=y CONFIG_DS1603=y CONFIG_LASAT_SYSCTL=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_MIPS_NILE4=y @@ -121,8 +125,8 @@ CONFIG_PAGE_SIZE_4KB=y CONFIG_BOARD_SCACHE=y CONFIG_R5000_CPU_SCACHE=y CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set # CONFIG_64BIT_PHYS_ADDR is not set CONFIG_CPU_HAS_LLSC=y @@ -139,6 +143,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -151,6 +156,7 @@ CONFIG_HZ=1000 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +# CONFIG_KEXEC is not set CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -169,15 +175,20 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y CONFIG_RELAY=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -185,12 +196,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y -CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -208,6 +219,7 @@ CONFIG_KMOD=y # # Block layer # +CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set @@ -249,6 +261,14 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_TRAD_SIGNALS=y +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set + # # Networking # @@ -262,7 +282,10 @@ CONFIG_NET=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=m +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set @@ -279,10 +302,13 @@ CONFIG_IP_FIB_HASH=y # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_TCP_MD5SIG=y # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set @@ -312,7 +338,6 @@ CONFIG_NETWORK_SECMARK=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -367,11 +392,13 @@ CONFIG_MTD_PARTITIONS=y # User Modules And Translation Layers # CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set # # RAM/ROM/Flash chip drivers @@ -427,6 +454,7 @@ CONFIG_MTD_LASAT=y # NAND Flash Device Drivers # # CONFIG_MTD_NAND is not set +# CONFIG_MTD_NAND_CAFE is not set # # OneNAND Flash Device Drivers @@ -460,10 +488,17 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m +# +# Misc devices +# +CONFIG_SGI_IOC4=m +# CONFIG_TIFM_CORE is not set + # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # @@ -500,8 +535,10 @@ CONFIG_BLK_DEV_CMD64X=y # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +CONFIG_BLK_DEV_IT8213=m # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set @@ -511,6 +548,7 @@ CONFIG_BLK_DEV_CMD64X=y # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set +CONFIG_BLK_DEV_TC86C001=m # CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set @@ -522,6 +560,12 @@ CONFIG_IDEDMA_AUTO=y # CONFIG_RAID_ATTRS=m # CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set # # Multi-device support (RAID and LVM) @@ -572,6 +616,8 @@ CONFIG_LXT_PHY=m CONFIG_CICADA_PHY=m CONFIG_VITESSE_PHY=m CONFIG_SMSC_PHY=m +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set # # Ethernet (10 or 100Mbit) @@ -607,14 +653,17 @@ CONFIG_NET_ETHERNET=y # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_QLA3XXX=m # # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3=m # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set +CONFIG_NETXEN_NIC=m # # Token Ring devices @@ -653,6 +702,7 @@ CONFIG_NET_ETHERNET=y # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces @@ -730,10 +780,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set @@ -741,7 +787,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -765,15 +810,10 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HWMON is not set # CONFIG_HWMON_VID is not set -# -# Misc devices -# - # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -791,12 +831,18 @@ CONFIG_VIDEO_V4L2=y # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set +# +# HID Devices +# +# CONFIG_HID is not set + # # USB support # @@ -859,6 +905,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y # DMA Devices # +# +# Auxiliary Display support +# + +# +# Virtualization +# + # # File systems # @@ -869,13 +923,15 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set CONFIG_EXT3_FS_SECURITY=y +# CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set +CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -886,6 +942,7 @@ CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set CONFIG_FUSE_FS=m +CONFIG_GENERIC_ACL=y # # CD-ROM/DVD Filesystems @@ -905,23 +962,25 @@ CONFIG_FUSE_FS=m # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set +CONFIG_CONFIGFS_FS=m # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set @@ -947,7 +1006,6 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set -# CONFIG_CIFS_DEBUG2 is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -964,6 +1022,14 @@ CONFIG_MSDOS_PARTITION=y # # CONFIG_NLS is not set +# +# Distributed Lock Manager +# +CONFIG_DLM=m +CONFIG_DLM_TCP=y +# CONFIG_DLM_SCTP is not set +# CONFIG_DLM_DEBUG is not set + # # Profiling support # @@ -974,11 +1040,13 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" @@ -993,18 +1061,30 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y # Cryptographic options # CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_CAST5=m @@ -1016,6 +1096,7 @@ CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_CAMELLIA=m # CONFIG_CRYPTO_TEST is not set # @@ -1025,6 +1106,7 @@ CONFIG_CRYPTO_CRC32C=m # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set CONFIG_CRC16=m CONFIG_CRC32=y @@ -1032,3 +1114,5 @@ CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig index 96e941084c04..8d21bb96349e 100644 --- a/arch/mips/configs/malta_defconfig +++ b/arch/mips/configs/malta_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.19-rc1 -# Fri Oct 6 17:34:55 2006 +# Linux kernel version: 2.6.20 +# Sun Feb 18 21:27:55 2007 # CONFIG_MIPS=y # # Machine selection # +CONFIG_ZONE_DMA=y # CONFIG_MIPS_MTX1 is not set # CONFIG_MIPS_BOSPORUS is not set # CONFIG_MIPS_PB1000 is not set @@ -40,6 +41,7 @@ CONFIG_MIPS_MALTA=y # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_V2PCI is not set # CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set # CONFIG_DDB5477 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set @@ -62,11 +64,14 @@ CONFIG_MIPS_MALTA=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -132,8 +137,8 @@ CONFIG_BOARD_SCACHE=y CONFIG_MIPS_CPU_SCACHE=y CONFIG_CPU_HAS_PREFETCH=y # CONFIG_MIPS_MT_DISABLED is not set -# CONFIG_MIPS_MT_SMTC is not set CONFIG_MIPS_MT_SMP=y +# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set CONFIG_MIPS_MT=y CONFIG_SYS_SUPPORTS_MULTITHREADING=y @@ -157,6 +162,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 CONFIG_SMP=y CONFIG_SYS_SUPPORTS_SMP=y CONFIG_NR_CPUS=2 @@ -173,6 +179,7 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_PREEMPT_BKL=y +# CONFIG_KEXEC is not set CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -192,6 +199,7 @@ CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set @@ -199,8 +207,8 @@ CONFIG_SYSVIPC=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set # CONFIG_CPUSETS is not set +CONFIG_SYSFS_DEPRECATED=y CONFIG_RELAY=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y @@ -259,7 +267,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -# CONFIG_PCI_MULTITHREAD_PROBE is not set CONFIG_MMU=y # @@ -279,6 +286,14 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_TRAD_SIGNALS=y +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set + # # Networking # @@ -294,7 +309,9 @@ CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y @@ -302,7 +319,6 @@ CONFIG_ASK_IP_FIB_HASH=y # CONFIG_IP_FIB_TRIE is not set CONFIG_IP_FIB_HASH=y CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_FWMARK=y CONFIG_IP_ROUTE_MULTIPATH=y # CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set CONFIG_IP_ROUTE_VERBOSE=y @@ -331,6 +347,7 @@ CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_TCP_MD5SIG=y # # IP: Virtual Server Configuration @@ -379,8 +396,8 @@ CONFIG_INET6_XFRM_MODE_TRANSPORT=m CONFIG_INET6_XFRM_MODE_TUNNEL=m CONFIG_INET6_XFRM_MODE_BEET=m # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m CONFIG_IPV6_TUNNEL=m -# CONFIG_IPV6_SUBTREES is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set CONFIG_NETWORK_SECMARK=y CONFIG_NETFILTER=y @@ -393,15 +410,37 @@ CONFIG_BRIDGE_NETFILTER=y CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NF_CONNTRACK_ENABLED=m +CONFIG_NF_CONNTRACK_SUPPORT=y +# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CT_ACCT=y +CONFIG_NF_CONNTRACK_MARK=y +CONFIG_NF_CONNTRACK_SECMARK=y +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m # CONFIG_NETFILTER_XT_TARGET_DSCP is not set CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NOTRACK=m CONFIG_NETFILTER_XT_TARGET_SECMARK=m # CONFIG_NETFILTER_XT_TARGET_CONNSECMARK is not set +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m @@ -425,25 +464,13 @@ CONFIG_NETFILTER_XT_MATCH_STATE=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m # # IP: Netfilter Configuration # -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_CT_ACCT=y -CONFIG_IP_NF_CONNTRACK_MARK=y -CONFIG_IP_NF_CONNTRACK_SECMARK=y -CONFIG_IP_NF_CONNTRACK_EVENTS=y -CONFIG_IP_NF_CONNTRACK_NETLINK=m -CONFIG_IP_NF_CT_PROTO_SCTP=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -# CONFIG_IP_NF_NETBIOS_NS is not set -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m -CONFIG_IP_NF_PPTP=m -CONFIG_IP_NF_H323=m -CONFIG_IP_NF_SIP=m +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_IPRANGE=m @@ -454,26 +481,25 @@ CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_MATCH_OWNER=m CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_NAT_PPTP=m -CONFIG_IP_NF_NAT_H323=m -CONFIG_IP_NF_NAT_SIP=m +CONFIG_NF_NAT_SNMP_BASIC=m +CONFIG_NF_NAT_PROTO_GRE=m +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +CONFIG_NF_NAT_TFTP=m +CONFIG_NF_NAT_AMANDA=m +CONFIG_NF_NAT_PPTP=m +CONFIG_NF_NAT_H323=m +CONFIG_NF_NAT_SIP=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m @@ -487,6 +513,7 @@ CONFIG_IP_NF_ARP_MANGLE=m # # IPv6: Netfilter Configuration (EXPERIMENTAL) # +CONFIG_NF_CONNTRACK_IPV6=m CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_RT=m @@ -496,6 +523,7 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_OWNER=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_LOG=m @@ -568,6 +596,7 @@ CONFIG_IPDDP_DECAP=y # QoS and/or fair queueing # CONFIG_NET_SCHED=y +CONFIG_NET_SCH_FIFO=y CONFIG_NET_SCH_CLK_JIFFIES=y # CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set # CONFIG_NET_SCH_CLK_CPU is not set @@ -655,6 +684,7 @@ CONFIG_MTD_PARTITIONS=y # User Modules And Translation Layers # CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set @@ -718,6 +748,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=0 # NAND Flash Device Drivers # # CONFIG_MTD_NAND is not set +# CONFIG_MTD_NAND_CAFE is not set # # OneNAND Flash Device Drivers @@ -756,6 +787,12 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m +# +# Misc devices +# +CONFIG_SGI_IOC4=m +# CONFIG_TIFM_CORE is not set + # # ATA/ATAPI/MFM/RLL support # @@ -801,6 +838,7 @@ CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set CONFIG_BLK_DEV_PIIX=y +CONFIG_BLK_DEV_IT8213=m # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set @@ -810,6 +848,7 @@ CONFIG_BLK_DEV_PIIX=y # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set +CONFIG_BLK_DEV_TC86C001=m # CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set @@ -821,6 +860,7 @@ CONFIG_IDEDMA_AUTO=y # CONFIG_RAID_ATTRS=m CONFIG_SCSI=m +CONFIG_SCSI_TGT=m CONFIG_SCSI_NETLINK=y CONFIG_SCSI_PROC_FS=y @@ -841,6 +881,7 @@ CONFIG_CHR_DEV_SG=m CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y +CONFIG_SCSI_SCAN_ASYNC=y # # SCSI Transports @@ -889,6 +930,7 @@ CONFIG_AIC7XXX_REG_PRETTY_PRINT=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set # # Serial ATA (prod) and Parallel ATA (experimental) drivers @@ -964,6 +1006,7 @@ CONFIG_LXT_PHY=m CONFIG_CICADA_PHY=m CONFIG_VITESSE_PHY=m CONFIG_SMSC_PHY=m +# CONFIG_BROADCOM_PHY is not set # CONFIG_FIXED_PHY is not set # @@ -1002,7 +1045,7 @@ CONFIG_PCNET32=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set -# CONFIG_LAN_SAA9730 is not set +# CONFIG_SC92031 is not set # # Ethernet (1000 Mbit) @@ -1022,14 +1065,17 @@ CONFIG_PCNET32=y # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set # # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3=m # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set +CONFIG_NETXEN_NIC=m # # Token Ring devices @@ -1146,10 +1192,6 @@ CONFIG_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set @@ -1157,7 +1199,6 @@ CONFIG_RTC=y # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -1181,11 +1222,6 @@ CONFIG_RTC=y # CONFIG_HWMON is not set # CONFIG_HWMON_VID is not set -# -# Misc devices -# -# CONFIG_TIFM_CORE is not set - # # Multimedia devices # @@ -1214,6 +1250,12 @@ CONFIG_DUMMY_CONSOLE=y # # CONFIG_SOUND is not set +# +# HID Devices +# +CONFIG_HID=m +# CONFIG_HID_DEBUG is not set + # # USB support # @@ -1276,6 +1318,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y # DMA Devices # +# +# Auxiliary Display support +# + +# +# Virtualization +# + # # File systems # @@ -1286,6 +1336,7 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y @@ -1327,7 +1378,6 @@ CONFIG_FUSE_FS=m CONFIG_ISO9660_FS=m CONFIG_JOLIET=y CONFIG_ZISOFS=y -CONFIG_ZISOFS_FS=m CONFIG_UDF_FS=m CONFIG_UDF_NLS=y @@ -1365,6 +1415,20 @@ CONFIG_BEFS_FS=m # CONFIG_BEFS_DEBUG is not set CONFIG_BFS_FS=m CONFIG_EFS_FS=m +CONFIG_JFFS2_FS=m +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +CONFIG_JFFS2_FS_XATTR=y +CONFIG_JFFS2_FS_POSIX_ACL=y +CONFIG_JFFS2_FS_SECURITY=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set CONFIG_CRAMFS=m CONFIG_VXFS_FS=m # CONFIG_HPFS_FS is not set @@ -1470,9 +1534,10 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=15 -# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" @@ -1489,19 +1554,24 @@ CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=m CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_TWOFISH_COMMON=m @@ -1516,6 +1586,7 @@ CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_CAMELLIA=m # CONFIG_CRYPTO_TEST is not set # @@ -1525,6 +1596,7 @@ CONFIG_CRYPTO_CRC32C=m # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set CONFIG_CRC16=m CONFIG_CRC32=y @@ -1536,3 +1608,5 @@ CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/mipssim_defconfig b/arch/mips/configs/mipssim_defconfig index 03efcfd0503b..2acb99bf2eca 100644 --- a/arch/mips/configs/mipssim_defconfig +++ b/arch/mips/configs/mipssim_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc1 -# Thu Jul 6 10:04:13 2006 +# Linux kernel version: 2.6.20 +# Sun Feb 18 21:27:56 2007 # CONFIG_MIPS=y # # Machine selection # +CONFIG_ZONE_DMA=y # CONFIG_MIPS_MTX1 is not set # CONFIG_MIPS_BOSPORUS is not set # CONFIG_MIPS_PB1000 is not set @@ -25,8 +26,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_IVR is not set -# CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set @@ -42,6 +41,7 @@ CONFIG_MIPS_SIM=y # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_V2PCI is not set # CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set # CONFIG_DDB5477 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set @@ -64,10 +64,14 @@ CONFIG_MIPS_SIM=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y # CONFIG_CPU_BIG_ENDIAN is not set @@ -117,8 +121,8 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_64KB is not set CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set # CONFIG_64BIT_PHYS_ADDR is not set CONFIG_CPU_HAS_LLSC=y @@ -136,6 +140,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -148,6 +153,7 @@ CONFIG_HZ=1000 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +# CONFIG_KEXEC is not set CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -166,15 +172,20 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -183,12 +194,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y -CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -206,6 +217,7 @@ CONFIG_KMOD=y # # Block layer # +CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_LSF is not set @@ -243,6 +255,13 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_TRAD_SIGNALS=y +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set + # # Networking # @@ -257,7 +276,10 @@ CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y @@ -286,10 +308,13 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_TCP_MD5SIG=y # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set @@ -324,7 +349,6 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -CONFIG_NET_DIVERT=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -332,6 +356,7 @@ CONFIG_NET_DIVERT=y # QoS and/or fair queueing # CONFIG_NET_SCHED=y +CONFIG_NET_SCH_FIFO=y CONFIG_NET_SCH_CLK_JIFFIES=y # CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set # CONFIG_NET_SCH_CLK_CPU is not set @@ -377,6 +402,7 @@ CONFIG_NET_ESTIMATOR=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_IEEE80211 is not set +CONFIG_FIB_RULES=y # # Device Drivers @@ -389,6 +415,7 @@ CONFIG_NET_ESTIMATOR=y # CONFIG_PREVENT_FIRMWARE_BUILD is not set # CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # @@ -422,6 +449,10 @@ CONFIG_BLK_DEV_NBD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# +# Misc devices +# + # # ATA/ATAPI/MFM/RLL support # @@ -432,6 +463,12 @@ CONFIG_BLK_DEV_NBD=y # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set # # Multi-device support (RAID and LVM) @@ -468,7 +505,6 @@ CONFIG_NETDEVICES=y # Ethernet (10 or 100Mbit) # # CONFIG_NET_ETHERNET is not set -# CONFIG_MIPS_SIM_NET is not set # # Ethernet (1000 Mbit) @@ -512,6 +548,7 @@ CONFIG_NETDEVICES=y # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces @@ -579,17 +616,12 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_GEN_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_RAW_DRIVER is not set # # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -605,6 +637,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # # Dallas's 1-wire bus # +# CONFIG_W1 is not set # # Hardware Monitoring support @@ -612,15 +645,10 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HWMON is not set # CONFIG_HWMON_VID is not set -# -# Misc devices -# - # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -638,6 +666,11 @@ CONFIG_VIDEO_V4L2=y # # CONFIG_SOUND is not set +# +# HID Devices +# +# CONFIG_HID is not set + # # USB support # @@ -698,6 +731,14 @@ CONFIG_VIDEO_V4L2=y # DMA Devices # +# +# Auxiliary Display support +# + +# +# Virtualization +# + # # File systems # @@ -705,10 +746,12 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_MINIX_FS is not set CONFIG_ROMFS_FS=y # CONFIG_INOTIFY is not set @@ -736,6 +779,7 @@ CONFIG_ROMFS_FS=y # CONFIG_PROC_FS=y # CONFIG_PROC_KCORE is not set +CONFIG_PROC_SYSCTL=y # CONFIG_SYSFS is not set # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set @@ -776,7 +820,6 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set -# CONFIG_CIFS_DEBUG2 is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -793,6 +836,10 @@ CONFIG_MSDOS_PARTITION=y # # CONFIG_NLS is not set +# +# Distributed Lock Manager +# + # # Profiling support # @@ -803,23 +850,29 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DETECT_SOFTLOCKUP is not set # CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set CONFIG_DEBUG_MUTEXES=y -# CONFIG_DEBUG_RWSEMS is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_CROSSCOMPILE=y @@ -838,7 +891,12 @@ CONFIG_CMDLINE="nfsroot=192.168.192.169:/u1/mipsel,timeo=20 ip=dhcp" # Cryptographic options # CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=m # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y @@ -847,7 +905,13 @@ CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_LRW=m # CONFIG_CRYPTO_DES is not set +CONFIG_CRYPTO_FCRYPT=m # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_SERPENT is not set @@ -861,6 +925,7 @@ CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set +CONFIG_CRYPTO_CAMELLIA=m # CONFIG_CRYPTO_TEST is not set # @@ -870,8 +935,11 @@ CONFIG_CRYPTO_MD5=y # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set CONFIG_CRC16=y CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/mpc30x_defconfig b/arch/mips/configs/mpc30x_defconfig index e4221aafbc4c..d52a5a4877da 100644 --- a/arch/mips/configs/mpc30x_defconfig +++ b/arch/mips/configs/mpc30x_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc2 -# Tue Jul 25 23:16:46 2006 +# Linux kernel version: 2.6.20 +# Sun Feb 18 21:27:56 2007 # CONFIG_MIPS=y # # Machine selection # +CONFIG_ZONE_DMA=y # CONFIG_MIPS_MTX1 is not set # CONFIG_MIPS_BOSPORUS is not set # CONFIG_MIPS_PB1000 is not set @@ -25,8 +26,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_IVR is not set -# CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set @@ -42,6 +41,7 @@ CONFIG_MIPS=y # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_V2PCI is not set # CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set # CONFIG_DDB5477 is not set CONFIG_MACH_VR41XX=y # CONFIG_PMC_YOSEMITE is not set @@ -71,10 +71,14 @@ CONFIG_VICTOR_MPC30X=y # CONFIG_ZAO_CAPCELLA is not set CONFIG_PCI_VR41XX=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y # CONFIG_CPU_BIG_ENDIAN is not set @@ -107,6 +111,7 @@ CONFIG_CPU_VR41XX=y # CONFIG_CPU_SB1 is not set CONFIG_SYS_HAS_CPU_VR41XX=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y @@ -120,8 +125,8 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y @@ -136,6 +141,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -148,6 +154,7 @@ CONFIG_HZ=1000 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +# CONFIG_KEXEC is not set CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -166,16 +173,20 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -CONFIG_SYSCTL=y +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y CONFIG_RELAY=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -183,12 +194,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y -CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -206,6 +217,7 @@ CONFIG_KMOD=y # # Block layer # +CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set @@ -260,6 +272,14 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_TRAD_SIGNALS=y +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set + # # Networking # @@ -274,7 +294,10 @@ CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=m +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set @@ -292,10 +315,13 @@ CONFIG_IP_FIB_HASH=y # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_TCP_MD5SIG=y # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set @@ -325,7 +351,6 @@ CONFIG_NETWORK_SECMARK=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -398,10 +423,17 @@ CONFIG_CONNECTOR=m # CONFIG_CDROM_PKTCDVD is not set CONFIG_ATA_OVER_ETH=m +# +# Misc devices +# +CONFIG_SGI_IOC4=m +# CONFIG_TIFM_CORE is not set + # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # @@ -431,6 +463,12 @@ CONFIG_IDE_GENERIC=y # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set # # Multi-device support (RAID and LVM) @@ -492,14 +530,17 @@ CONFIG_MII=m # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_QLA3XXX=m # # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3=m # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set +CONFIG_NETXEN_NIC=m # # Token Ring devices @@ -594,6 +635,7 @@ CONFIG_PCMCIA_AXNET=m # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces @@ -665,10 +707,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_DRM is not set # @@ -684,7 +722,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -708,15 +745,10 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HWMON is not set # CONFIG_HWMON_VID is not set -# -# Misc devices -# - # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -735,12 +767,19 @@ CONFIG_VIDEO_V4L2=y # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set +# +# HID Devices +# +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + # # USB support # @@ -754,8 +793,8 @@ CONFIG_USB=m # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set # @@ -764,7 +803,8 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_EHCI_HCD is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=m -# CONFIG_USB_OHCI_BIG_ENDIAN is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set @@ -782,7 +822,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # may also be needed; see USB_STORAGE Help for more information # -# CONFIG_USB_STORAGE is not set # CONFIG_USB_LIBUSUAL is not set # @@ -807,6 +846,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set +# CONFIG_USB_GTCO is not set # # USB Imaging devices @@ -820,6 +860,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_KAWETH is not set CONFIG_USB_PEGASUS=m # CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set # CONFIG_USB_USBNET is not set # CONFIG_USB_MON is not set @@ -837,6 +878,7 @@ CONFIG_USB_PEGASUS=m # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set @@ -844,11 +886,12 @@ CONFIG_USB_PEGASUS=m # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGETKIT is not set -# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_TEST is not set # @@ -905,6 +948,14 @@ CONFIG_USB_PEGASUS=m # DMA Devices # +# +# Auxiliary Display support +# + +# +# Virtualization +# + # # File systems # @@ -912,10 +963,12 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -945,17 +998,19 @@ CONFIG_FUSE_FS=m # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set +CONFIG_CONFIGFS_FS=m # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set @@ -999,6 +1054,14 @@ CONFIG_MSDOS_PARTITION=y # # CONFIG_NLS is not set +# +# Distributed Lock Manager +# +CONFIG_DLM=m +CONFIG_DLM_TCP=y +# CONFIG_DLM_SCTP is not set +# CONFIG_DLM_DEBUG is not set + # # Profiling support # @@ -1009,11 +1072,13 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="mem=32M console=ttyVR0,19200 ide0=0x170,0x376,73" @@ -1028,18 +1093,30 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y # Cryptographic options # CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_CAST5=m @@ -1051,6 +1128,7 @@ CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_CAMELLIA=m # CONFIG_CRYPTO_TEST is not set # @@ -1060,6 +1138,7 @@ CONFIG_CRYPTO_CRC32C=m # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set CONFIG_CRC16=m CONFIG_CRC32=y @@ -1067,3 +1146,5 @@ CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/ocelot_3_defconfig b/arch/mips/configs/ocelot_3_defconfig index 32b1afdd1c20..746106b88bab 100644 --- a/arch/mips/configs/ocelot_3_defconfig +++ b/arch/mips/configs/ocelot_3_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc1 -# Thu Jul 6 10:04:15 2006 +# Linux kernel version: 2.6.20 +# Sun Feb 18 21:27:58 2007 # CONFIG_MIPS=y # # Machine selection # +CONFIG_ZONE_DMA=y # CONFIG_MIPS_MTX1 is not set # CONFIG_MIPS_BOSPORUS is not set # CONFIG_MIPS_PB1000 is not set @@ -25,8 +26,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_IVR is not set -# CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set @@ -42,6 +41,7 @@ CONFIG_MOMENCO_OCELOT_3=y # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_V2PCI is not set # CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set # CONFIG_DDB5477 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set @@ -64,10 +64,14 @@ CONFIG_MOMENCO_OCELOT_3=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_CPU_BIG_ENDIAN=y @@ -104,6 +108,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 CONFIG_CPU_RM9000=y # CONFIG_CPU_SB1 is not set CONFIG_SYS_HAS_CPU_RM9000=y +CONFIG_WEAK_ORDERING=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y @@ -122,8 +127,8 @@ CONFIG_BOARD_SCACHE=y CONFIG_RM7000_CPU_SCACHE=y CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set # CONFIG_64BIT_PHYS_ADDR is not set CONFIG_CPU_HAS_LLSC=y @@ -141,6 +146,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -153,6 +159,7 @@ CONFIG_HZ=1000 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +# CONFIG_KEXEC is not set CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -171,16 +178,21 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_SYSFS_DEPRECATED=y CONFIG_RELAY=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -188,12 +200,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y -CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -211,6 +223,7 @@ CONFIG_KMOD=y # # Block layer # +CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set @@ -252,6 +265,14 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_TRAD_SIGNALS=y +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set + # # Networking # @@ -266,7 +287,10 @@ CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set @@ -283,13 +307,16 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set +CONFIG_INET_TUNNEL=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_TCP_MD5SIG=y # # IP: Virtual Server Configuration @@ -302,11 +329,17 @@ CONFIG_IPV6_ROUTE_INFO=y # CONFIG_INET6_AH is not set # CONFIG_INET6_ESP is not set # CONFIG_INET6_IPCOMP is not set +CONFIG_IPV6_MIP6=y # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set CONFIG_INET6_XFRM_MODE_TRANSPORT=m CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_SIT=m # CONFIG_IPV6_TUNNEL is not set +CONFIG_IPV6_MULTIPLE_TABLES=y +CONFIG_IPV6_SUBTREES=y CONFIG_NETWORK_SECMARK=y CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -317,15 +350,42 @@ CONFIG_NETFILTER=y CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m -# CONFIG_NF_CONNTRACK is not set +CONFIG_NF_CONNTRACK_ENABLED=m +CONFIG_NF_CONNTRACK_SUPPORT=y +# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CT_ACCT=y +CONFIG_NF_CONNTRACK_MARK=y +CONFIG_NF_CONNTRACK_SECMARK=y +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_SECMARK=m +CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m @@ -336,14 +396,17 @@ CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_QUOTA=m CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STATE=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m # # IP: Netfilter Configuration # -# CONFIG_IP_NF_CONNTRACK is not set +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -351,6 +414,7 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # # IPv6: Netfilter Configuration (EXPERIMENTAL) # +CONFIG_NF_CONNTRACK_IPV6=m # CONFIG_IP6_NF_QUEUE is not set # CONFIG_IP6_NF_IPTABLES is not set @@ -377,7 +441,6 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -401,6 +464,7 @@ CONFIG_IEEE80211_CRYPT_CCMP=m CONFIG_IEEE80211_SOFTMAC=m # CONFIG_IEEE80211_SOFTMAC_DEBUG is not set CONFIG_WIRELESS_EXT=y +CONFIG_FIB_RULES=y # # Device Drivers @@ -450,6 +514,12 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_CDROM_PKTCDVD is not set CONFIG_ATA_OVER_ETH=m +# +# Misc devices +# +CONFIG_SGI_IOC4=m +# CONFIG_TIFM_CORE is not set + # # ATA/ATAPI/MFM/RLL support # @@ -460,6 +530,8 @@ CONFIG_ATA_OVER_ETH=m # CONFIG_RAID_ATTRS=m CONFIG_SCSI=m +CONFIG_SCSI_TGT=m +CONFIG_SCSI_NETLINK=y CONFIG_SCSI_PROC_FS=y # @@ -478,14 +550,17 @@ CONFIG_SCSI_PROC_FS=y # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set +CONFIG_SCSI_SCAN_ASYNC=y # -# SCSI Transport Attributes +# SCSI Transports # # CONFIG_SCSI_SPI_ATTRS is not set CONFIG_SCSI_FC_ATTRS=m CONFIG_SCSI_ISCSI_ATTRS=m CONFIG_SCSI_SAS_ATTRS=m +CONFIG_SCSI_SAS_LIBSAS=m +# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set # # SCSI low-level drivers @@ -498,26 +573,35 @@ CONFIG_ISCSI_TCP=m # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set +CONFIG_SCSI_AIC94XX=m +# CONFIG_AIC94XX_DEBUG is not set # CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_SATA is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set # # Multi-device support (RAID and LVM) @@ -571,6 +655,8 @@ CONFIG_LXT_PHY=m CONFIG_CICADA_PHY=m CONFIG_VITESSE_PHY=m CONFIG_SMSC_PHY=m +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set # # Ethernet (10 or 100Mbit) @@ -607,7 +693,7 @@ CONFIG_E100=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set -# CONFIG_LAN_SAA9730 is not set +# CONFIG_SC92031 is not set # # Ethernet (1000 Mbit) @@ -630,14 +716,18 @@ CONFIG_MV643XX_ETH=y CONFIG_MV643XX_ETH_0=y CONFIG_MV643XX_ETH_1=y CONFIG_MV643XX_ETH_2=y +CONFIG_QLA3XXX=m +# CONFIG_ATL1 is not set # # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3=m # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set +CONFIG_NETXEN_NIC=m # # Token Ring devices @@ -665,6 +755,7 @@ CONFIG_PPP_DEFLATE=m CONFIG_PPP_MPPE=m CONFIG_PPPOE=m # CONFIG_SLIP is not set +CONFIG_SLHC=m # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set @@ -685,6 +776,7 @@ CONFIG_PPPOE=m # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces @@ -758,10 +850,6 @@ CONFIG_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set @@ -769,7 +857,6 @@ CONFIG_RTC=y # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -793,15 +880,10 @@ CONFIG_RTC=y # CONFIG_HWMON is not set # CONFIG_HWMON_VID is not set -# -# Misc devices -# - # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -816,6 +898,7 @@ CONFIG_FB=y # CONFIG_FB_CFB_FILLRECT is not set # CONFIG_FB_CFB_COPYAREA is not set # CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set CONFIG_FB_MODE_HELPERS=y @@ -832,6 +915,7 @@ CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set # CONFIG_FB_NEOMAGIC is not set @@ -867,6 +951,12 @@ CONFIG_LOGO_LINUX_CLUT224=y # # CONFIG_SOUND is not set +# +# HID Devices +# +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + # # USB support # @@ -929,6 +1019,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y # DMA Devices # +# +# Auxiliary Display support +# + +# +# Virtualization +# + # # File systems # @@ -939,6 +1037,7 @@ CONFIG_EXT3_FS=m CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set CONFIG_JBD=m # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y @@ -947,12 +1046,13 @@ CONFIG_REISERFS_FS=m # CONFIG_REISERFS_PROC_INFO is not set # CONFIG_REISERFS_FS_XATTR is not set # CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set +CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=m # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -963,6 +1063,7 @@ CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=y CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_GENERIC_ACL=y # # CD-ROM/DVD Filesystems @@ -982,11 +1083,13 @@ CONFIG_FUSE_FS=m # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set +CONFIG_CONFIGFS_FS=m # # Miscellaneous filesystems @@ -1029,7 +1132,6 @@ CONFIG_SUNRPC=y CONFIG_SMB_FS=m # CONFIG_SMB_NLS_DEFAULT is not set # CONFIG_CIFS is not set -# CONFIG_CIFS_DEBUG2 is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -1085,6 +1187,14 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set +# +# Distributed Lock Manager +# +CONFIG_DLM=m +CONFIG_DLM_TCP=y +# CONFIG_DLM_SCTP is not set +# CONFIG_DLM_DEBUG is not set + # # Profiling support # @@ -1095,11 +1205,13 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="ip=any root=nfs" @@ -1113,18 +1225,30 @@ CONFIG_CMDLINE="ip=any root=nfs" # Cryptographic options # CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_CAST5=m @@ -1136,6 +1260,7 @@ CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_CAMELLIA=m # CONFIG_CRYPTO_TEST is not set # @@ -1145,6 +1270,7 @@ CONFIG_CRYPTO_CRC32C=m # # Library routines # +CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC32=y @@ -1156,3 +1282,5 @@ CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/ocelot_c_defconfig b/arch/mips/configs/ocelot_c_defconfig index ebe75c1c71af..4b32b270df39 100644 --- a/arch/mips/configs/ocelot_c_defconfig +++ b/arch/mips/configs/ocelot_c_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc1 -# Thu Jul 6 10:04:16 2006 +# Linux kernel version: 2.6.20 +# Sun Feb 18 21:27:58 2007 # CONFIG_MIPS=y # # Machine selection # +CONFIG_ZONE_DMA=y # CONFIG_MIPS_MTX1 is not set # CONFIG_MIPS_BOSPORUS is not set # CONFIG_MIPS_PB1000 is not set @@ -25,8 +26,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_IVR is not set -# CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set @@ -42,6 +41,7 @@ CONFIG_MOMENCO_OCELOT_C=y # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_V2PCI is not set # CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set # CONFIG_DDB5477 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set @@ -64,10 +64,14 @@ CONFIG_MOMENCO_OCELOT_C=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_CPU_BIG_ENDIAN=y @@ -120,8 +124,8 @@ CONFIG_BOARD_SCACHE=y CONFIG_RM7000_CPU_SCACHE=y CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y @@ -138,6 +142,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y +CONFIG_ZONE_DMA_FLAG=1 # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -150,6 +155,7 @@ CONFIG_HZ=1000 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +# CONFIG_KEXEC is not set CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -168,15 +174,20 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y CONFIG_RELAY=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -184,12 +195,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y -CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -202,6 +213,7 @@ CONFIG_BASE_SMALL=0 # # Block layer # +CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # @@ -242,10 +254,19 @@ CONFIG_BINFMT_ELF=y # CONFIG_BUILD_ELF64 is not set CONFIG_MIPS32_COMPAT=y CONFIG_COMPAT=y +CONFIG_SYSVIPC_COMPAT=y CONFIG_MIPS32_O32=y CONFIG_MIPS32_N32=y CONFIG_BINFMT_ELF32=y +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set + # # Networking # @@ -259,7 +280,10 @@ CONFIG_NET=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=y +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set @@ -279,10 +303,13 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_TCP_MD5SIG=y # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set @@ -312,7 +339,6 @@ CONFIG_NETWORK_SECMARK=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -386,6 +412,12 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=y +# +# Misc devices +# +CONFIG_SGI_IOC4=y +# CONFIG_TIFM_CORE is not set + # # ATA/ATAPI/MFM/RLL support # @@ -396,6 +428,12 @@ CONFIG_ATA_OVER_ETH=y # CONFIG_RAID_ATTRS=y # CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set # # Multi-device support (RAID and LVM) @@ -446,6 +484,8 @@ CONFIG_LXT_PHY=y CONFIG_CICADA_PHY=y CONFIG_VITESSE_PHY=y CONFIG_SMSC_PHY=y +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set # # Ethernet (10 or 100Mbit) @@ -482,14 +522,17 @@ CONFIG_NET_ETHERNET=y # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_MV643XX_ETH is not set +CONFIG_QLA3XXX=y # # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3=y # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set +CONFIG_NETXEN_NIC=y # # Token Ring devices @@ -528,6 +571,7 @@ CONFIG_NET_ETHERNET=y # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces @@ -605,10 +649,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set @@ -616,7 +656,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -640,15 +679,10 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HWMON is not set # CONFIG_HWMON_VID is not set -# -# Misc devices -# - # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -666,12 +700,18 @@ CONFIG_VIDEO_V4L2=y # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set +# +# HID Devices +# +# CONFIG_HID is not set + # # USB support # @@ -734,6 +774,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y # DMA Devices # +# +# Auxiliary Display support +# + +# +# Virtualization +# + # # File systems # @@ -741,10 +789,12 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set +CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -755,6 +805,7 @@ CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set CONFIG_FUSE_FS=y +CONFIG_GENERIC_ACL=y # # CD-ROM/DVD Filesystems @@ -774,17 +825,20 @@ CONFIG_FUSE_FS=y # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set +CONFIG_CONFIGFS_FS=y # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set @@ -816,7 +870,6 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set -# CONFIG_CIFS_DEBUG2 is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -833,6 +886,14 @@ CONFIG_MSDOS_PARTITION=y # # CONFIG_NLS is not set +# +# Distributed Lock Manager +# +CONFIG_DLM=y +CONFIG_DLM_TCP=y +# CONFIG_DLM_SCTP is not set +# CONFIG_DLM_DEBUG is not set + # # Profiling support # @@ -843,12 +904,13 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_FS is not set -# CONFIG_UNWIND_INFO is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" @@ -863,7 +925,12 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y # Cryptographic options # CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=y CONFIG_CRYPTO_NULL=y CONFIG_CRYPTO_MD4=y CONFIG_CRYPTO_MD5=y @@ -872,9 +939,16 @@ CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y CONFIG_CRYPTO_WP512=y CONFIG_CRYPTO_TGR192=y +CONFIG_CRYPTO_GF128MUL=y +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=y +CONFIG_CRYPTO_LRW=y CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_FCRYPT=y CONFIG_CRYPTO_BLOWFISH=y CONFIG_CRYPTO_TWOFISH=y +CONFIG_CRYPTO_TWOFISH_COMMON=y CONFIG_CRYPTO_SERPENT=y CONFIG_CRYPTO_AES=y CONFIG_CRYPTO_CAST5=y @@ -886,6 +960,7 @@ CONFIG_CRYPTO_ANUBIS=y CONFIG_CRYPTO_DEFLATE=y CONFIG_CRYPTO_MICHAEL_MIC=y CONFIG_CRYPTO_CRC32C=y +CONFIG_CRYPTO_CAMELLIA=y # # Hardware crypto devices @@ -894,6 +969,7 @@ CONFIG_CRYPTO_CRC32C=y # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set CONFIG_CRC16=y CONFIG_CRC32=y @@ -901,3 +977,5 @@ CONFIG_LIBCRC32C=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/ocelot_defconfig b/arch/mips/configs/ocelot_defconfig index 5a9603c12902..674631b09c99 100644 --- a/arch/mips/configs/ocelot_defconfig +++ b/arch/mips/configs/ocelot_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc1 -# Thu Jul 6 10:04:16 2006 +# Linux kernel version: 2.6.20 +# Sun Feb 18 21:27:59 2007 # CONFIG_MIPS=y # # Machine selection # +CONFIG_ZONE_DMA=y # CONFIG_MIPS_MTX1 is not set # CONFIG_MIPS_BOSPORUS is not set # CONFIG_MIPS_PB1000 is not set @@ -25,8 +26,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_IVR is not set -# CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set @@ -42,6 +41,7 @@ CONFIG_MOMENCO_OCELOT=y # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_V2PCI is not set # CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set # CONFIG_DDB5477 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set @@ -64,10 +64,14 @@ CONFIG_MOMENCO_OCELOT=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_CPU_BIG_ENDIAN=y @@ -123,8 +127,8 @@ CONFIG_BOARD_SCACHE=y CONFIG_RM7000_CPU_SCACHE=y CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set # CONFIG_64BIT_PHYS_ADDR is not set CONFIG_CPU_HAS_LLSC=y @@ -142,6 +146,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -154,6 +159,7 @@ CONFIG_HZ=1000 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +# CONFIG_KEXEC is not set CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -172,15 +178,20 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y CONFIG_RELAY=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set # CONFIG_HOTPLUG is not set @@ -188,12 +199,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y -CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -206,6 +217,7 @@ CONFIG_BASE_SMALL=0 # # Block layer # +CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set @@ -233,7 +245,6 @@ CONFIG_MMU=y # # PCCARD (PCMCIA/CardBus) support # -# CONFIG_PCCARD is not set # # PCI Hotplug Support @@ -246,6 +257,14 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_TRAD_SIGNALS=y +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set + # # Networking # @@ -259,7 +278,10 @@ CONFIG_NET=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=y +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set @@ -279,10 +301,13 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_TCP_MD5SIG=y # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set @@ -312,7 +337,6 @@ CONFIG_NETWORK_SECMARK=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -345,7 +369,6 @@ CONFIG_WIRELESS_EXT=y # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set # CONFIG_SYS_HYPERVISOR is not set # @@ -381,6 +404,10 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=y +# +# Misc devices +# + # # ATA/ATAPI/MFM/RLL support # @@ -391,6 +418,12 @@ CONFIG_ATA_OVER_ETH=y # CONFIG_RAID_ATTRS=y # CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set # # Multi-device support (RAID and LVM) @@ -434,6 +467,8 @@ CONFIG_LXT_PHY=y CONFIG_CICADA_PHY=y CONFIG_VITESSE_PHY=y CONFIG_SMSC_PHY=y +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set # # Ethernet (10 or 100Mbit) @@ -484,6 +519,7 @@ CONFIG_NET_ETHERNET=y # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces @@ -557,17 +593,12 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_GEN_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_RAW_DRIVER is not set # # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -591,15 +622,10 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HWMON is not set # CONFIG_HWMON_VID is not set -# -# Misc devices -# - # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -617,12 +643,18 @@ CONFIG_VIDEO_V4L2=y # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set +# +# HID Devices +# +# CONFIG_HID is not set + # # USB support # @@ -683,6 +715,14 @@ CONFIG_DUMMY_CONSOLE=y # DMA Devices # +# +# Auxiliary Display support +# + +# +# Virtualization +# + # # File systems # @@ -690,10 +730,12 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set +CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -704,6 +746,7 @@ CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set CONFIG_FUSE_FS=y +CONFIG_GENERIC_ACL=y # # CD-ROM/DVD Filesystems @@ -723,17 +766,20 @@ CONFIG_FUSE_FS=y # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set +CONFIG_CONFIGFS_FS=y # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set @@ -765,7 +811,6 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set -# CONFIG_CIFS_DEBUG2 is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -782,6 +827,14 @@ CONFIG_MSDOS_PARTITION=y # # CONFIG_NLS is not set +# +# Distributed Lock Manager +# +CONFIG_DLM=y +CONFIG_DLM_TCP=y +# CONFIG_DLM_SCTP is not set +# CONFIG_DLM_DEBUG is not set + # # Profiling support # @@ -792,12 +845,13 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_FS is not set -# CONFIG_UNWIND_INFO is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" @@ -812,7 +866,12 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y # Cryptographic options # CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=y CONFIG_CRYPTO_NULL=y CONFIG_CRYPTO_MD4=y CONFIG_CRYPTO_MD5=y @@ -821,9 +880,16 @@ CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y CONFIG_CRYPTO_WP512=y CONFIG_CRYPTO_TGR192=y +CONFIG_CRYPTO_GF128MUL=y +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=y +CONFIG_CRYPTO_LRW=y CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_FCRYPT=y CONFIG_CRYPTO_BLOWFISH=y CONFIG_CRYPTO_TWOFISH=y +CONFIG_CRYPTO_TWOFISH_COMMON=y CONFIG_CRYPTO_SERPENT=y CONFIG_CRYPTO_AES=y CONFIG_CRYPTO_CAST5=y @@ -835,6 +901,7 @@ CONFIG_CRYPTO_ANUBIS=y CONFIG_CRYPTO_DEFLATE=y CONFIG_CRYPTO_MICHAEL_MIC=y CONFIG_CRYPTO_CRC32C=y +CONFIG_CRYPTO_CAMELLIA=y # # Hardware crypto devices @@ -843,6 +910,7 @@ CONFIG_CRYPTO_CRC32C=y # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set CONFIG_CRC16=y CONFIG_CRC32=y @@ -850,3 +918,5 @@ CONFIG_LIBCRC32C=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/ocelot_g_defconfig b/arch/mips/configs/ocelot_g_defconfig index 46a942c253cf..260026392347 100644 --- a/arch/mips/configs/ocelot_g_defconfig +++ b/arch/mips/configs/ocelot_g_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc1 -# Thu Jul 6 10:04:16 2006 +# Linux kernel version: 2.6.20 +# Sun Feb 18 21:28:00 2007 # CONFIG_MIPS=y # # Machine selection # +CONFIG_ZONE_DMA=y # CONFIG_MIPS_MTX1 is not set # CONFIG_MIPS_BOSPORUS is not set # CONFIG_MIPS_PB1000 is not set @@ -25,8 +26,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_IVR is not set -# CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set @@ -42,6 +41,7 @@ CONFIG_MOMENCO_OCELOT_G=y # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_V2PCI is not set # CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set # CONFIG_DDB5477 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set @@ -64,10 +64,14 @@ CONFIG_MOMENCO_OCELOT_G=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_CPU_BIG_ENDIAN=y @@ -106,15 +110,14 @@ CONFIG_CPU_RM7000=y # CONFIG_CPU_SB1 is not set CONFIG_SYS_HAS_CPU_RM7000=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y # # Kernel type # -# CONFIG_32BIT is not set -CONFIG_64BIT=y +CONFIG_32BIT=y +# CONFIG_64BIT is not set CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set @@ -123,9 +126,10 @@ CONFIG_BOARD_SCACHE=y CONFIG_RM7000_CPU_SCACHE=y CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set +# CONFIG_64BIT_PHYS_ADDR is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y @@ -141,6 +145,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y +CONFIG_ZONE_DMA_FLAG=1 # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -153,6 +158,7 @@ CONFIG_HZ=1000 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +# CONFIG_KEXEC is not set CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -171,15 +177,20 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y CONFIG_RELAY=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -187,12 +198,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y -CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -205,7 +216,10 @@ CONFIG_BASE_SMALL=0 # # Block layer # +CONFIG_BLOCK=y +# CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set +CONFIG_LSF=y # # IO Schedulers @@ -242,12 +256,15 @@ CONFIG_MMU=y # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set -# CONFIG_BUILD_ELF64 is not set -CONFIG_MIPS32_COMPAT=y -CONFIG_COMPAT=y -CONFIG_MIPS32_O32=y -CONFIG_MIPS32_N32=y -CONFIG_BINFMT_ELF32=y +CONFIG_TRAD_SIGNALS=y + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set # # Networking @@ -262,7 +279,10 @@ CONFIG_NET=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=y +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set @@ -282,10 +302,13 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_TCP_MD5SIG=y # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set @@ -315,7 +338,6 @@ CONFIG_NETWORK_SECMARK=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -389,6 +411,12 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=y +# +# Misc devices +# +CONFIG_SGI_IOC4=y +# CONFIG_TIFM_CORE is not set + # # ATA/ATAPI/MFM/RLL support # @@ -399,6 +427,12 @@ CONFIG_ATA_OVER_ETH=y # CONFIG_RAID_ATTRS=y # CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set # # Multi-device support (RAID and LVM) @@ -449,6 +483,8 @@ CONFIG_LXT_PHY=y CONFIG_CICADA_PHY=y CONFIG_VITESSE_PHY=y CONFIG_SMSC_PHY=y +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set # # Ethernet (10 or 100Mbit) @@ -485,14 +521,17 @@ CONFIG_GALILEO_64240_ETH=y # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_QLA3XXX=y # # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3=y # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set +CONFIG_NETXEN_NIC=y # # Token Ring devices @@ -531,6 +570,7 @@ CONFIG_GALILEO_64240_ETH=y # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces @@ -608,10 +648,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set @@ -619,7 +655,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -643,15 +678,10 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HWMON is not set # CONFIG_HWMON_VID is not set -# -# Misc devices -# - # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -669,12 +699,18 @@ CONFIG_VIDEO_V4L2=y # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set +# +# HID Devices +# +# CONFIG_HID is not set + # # USB support # @@ -737,6 +773,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y # DMA Devices # +# +# Auxiliary Display support +# + +# +# Virtualization +# + # # File systems # @@ -744,10 +788,12 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set +CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -758,6 +804,7 @@ CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set CONFIG_FUSE_FS=y +CONFIG_GENERIC_ACL=y # # CD-ROM/DVD Filesystems @@ -777,17 +824,20 @@ CONFIG_FUSE_FS=y # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set +CONFIG_CONFIGFS_FS=y # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set @@ -819,7 +869,6 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set -# CONFIG_CIFS_DEBUG2 is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -836,6 +885,14 @@ CONFIG_MSDOS_PARTITION=y # # CONFIG_NLS is not set +# +# Distributed Lock Manager +# +CONFIG_DLM=y +CONFIG_DLM_TCP=y +# CONFIG_DLM_SCTP is not set +# CONFIG_DLM_DEBUG is not set + # # Profiling support # @@ -846,12 +903,13 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_FS is not set -# CONFIG_UNWIND_INFO is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" @@ -866,7 +924,12 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y # Cryptographic options # CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=y CONFIG_CRYPTO_NULL=y CONFIG_CRYPTO_MD4=y CONFIG_CRYPTO_MD5=y @@ -875,9 +938,16 @@ CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y CONFIG_CRYPTO_WP512=y CONFIG_CRYPTO_TGR192=y +CONFIG_CRYPTO_GF128MUL=y +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=y +CONFIG_CRYPTO_LRW=y CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_FCRYPT=y CONFIG_CRYPTO_BLOWFISH=y CONFIG_CRYPTO_TWOFISH=y +CONFIG_CRYPTO_TWOFISH_COMMON=y CONFIG_CRYPTO_SERPENT=y CONFIG_CRYPTO_AES=y CONFIG_CRYPTO_CAST5=y @@ -889,6 +959,7 @@ CONFIG_CRYPTO_ANUBIS=y CONFIG_CRYPTO_DEFLATE=y CONFIG_CRYPTO_MICHAEL_MIC=y CONFIG_CRYPTO_CRC32C=y +CONFIG_CRYPTO_CAMELLIA=y # # Hardware crypto devices @@ -897,6 +968,7 @@ CONFIG_CRYPTO_CRC32C=y # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set CONFIG_CRC16=y CONFIG_CRC32=y @@ -904,3 +976,5 @@ CONFIG_LIBCRC32C=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/pb1100_defconfig b/arch/mips/configs/pb1100_defconfig index 7d3c688181d5..05a33a2aeb25 100644 --- a/arch/mips/configs/pb1100_defconfig +++ b/arch/mips/configs/pb1100_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc1 -# Thu Jul 6 10:04:17 2006 +# Linux kernel version: 2.6.20 +# Sun Feb 18 21:28:01 2007 # CONFIG_MIPS=y # # Machine selection # +CONFIG_ZONE_DMA=y # CONFIG_MIPS_MTX1 is not set # CONFIG_MIPS_BOSPORUS is not set # CONFIG_MIPS_PB1000 is not set @@ -25,8 +26,6 @@ CONFIG_MIPS_PB1100=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_IVR is not set -# CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set @@ -42,6 +41,7 @@ CONFIG_MIPS_PB1100=y # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_V2PCI is not set # CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set # CONFIG_DDB5477 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set @@ -64,14 +64,19 @@ CONFIG_MIPS_PB1100=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y # CONFIG_CPU_BIG_ENDIAN is not set CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y CONFIG_SOC_AU1100=y CONFIG_SOC_AU1X00=y @@ -117,8 +122,8 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_64KB is not set CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set CONFIG_64BIT_PHYS_ADDR=y CONFIG_CPU_HAS_LLSC=y @@ -136,6 +141,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -148,6 +154,7 @@ CONFIG_HZ=1000 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +# CONFIG_KEXEC is not set CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -166,15 +173,20 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y CONFIG_RELAY=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -182,12 +194,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y -CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -205,6 +217,7 @@ CONFIG_KMOD=y # # Block layer # +CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set @@ -253,6 +266,10 @@ CONFIG_PCMCIA_IOCTL=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_TRAD_SIGNALS=y + +# +# Power management options +# # CONFIG_PM is not set # @@ -269,7 +286,10 @@ CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=m +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set @@ -290,10 +310,13 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_TCP_MD5SIG=y # # IP: Virtual Server Configuration @@ -312,15 +335,42 @@ CONFIG_NETFILTER=y CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m -# CONFIG_NF_CONNTRACK is not set +CONFIG_NF_CONNTRACK_ENABLED=m +CONFIG_NF_CONNTRACK_SUPPORT=y +# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CT_ACCT=y +CONFIG_NF_CONNTRACK_MARK=y +CONFIG_NF_CONNTRACK_SECMARK=y +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_SECMARK=m +CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m @@ -331,14 +381,17 @@ CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_QUOTA=m CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STATE=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m # # IP: Netfilter Configuration # -# CONFIG_IP_NF_CONNTRACK is not set +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -366,7 +419,6 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -422,11 +474,13 @@ CONFIG_MTD_PARTITIONS=y # User Modules And Translation Layers # CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set # # RAM/ROM/Flash chip drivers @@ -510,6 +564,10 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m +# +# Misc devices +# + # # ATA/ATAPI/MFM/RLL support # @@ -520,6 +578,12 @@ CONFIG_ATA_OVER_ETH=m # CONFIG_RAID_ATTRS=m # CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set # # Multi-device support (RAID and LVM) @@ -563,6 +627,8 @@ CONFIG_LXT_PHY=m CONFIG_CICADA_PHY=m CONFIG_VITESSE_PHY=m CONFIG_SMSC_PHY=m +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set # # Ethernet (10 or 100Mbit) @@ -609,6 +675,7 @@ CONFIG_PPP_DEFLATE=m CONFIG_PPP_MPPE=m CONFIG_PPPOE=m # CONFIG_SLIP is not set +CONFIG_SLHC=m # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set @@ -628,6 +695,7 @@ CONFIG_PPPOE=m # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces @@ -706,10 +774,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_DTLK is not set # CONFIG_R3964 is not set -# -# Ftape, the floppy tape device driver -# - # # PCMCIA character devices # @@ -722,7 +786,6 @@ CONFIG_SYNCLINK_CS=m # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -746,15 +809,10 @@ CONFIG_SYNCLINK_CS=m # CONFIG_HWMON is not set # CONFIG_HWMON_VID is not set -# -# Misc devices -# - # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -772,12 +830,18 @@ CONFIG_VIDEO_V4L2=y # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set +# +# HID Devices +# +# CONFIG_HID is not set + # # USB support # @@ -839,6 +903,14 @@ CONFIG_USB_ARCH_HAS_OHCI=y # DMA Devices # +# +# Auxiliary Display support +# + +# +# Virtualization +# + # # File systems # @@ -851,6 +923,7 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y +# CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y @@ -863,6 +936,7 @@ CONFIG_REISERFS_FS_SECURITY=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -873,6 +947,7 @@ CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_GENERIC_ACL=y # # CD-ROM/DVD Filesystems @@ -892,23 +967,25 @@ CONFIG_FUSE_FS=m # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set +CONFIG_CONFIGFS_FS=m # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set # CONFIG_JFFS2_FS is not set CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set @@ -937,7 +1014,6 @@ CONFIG_SUNRPC=y CONFIG_SMB_FS=m # CONFIG_SMB_NLS_DEFAULT is not set # CONFIG_CIFS is not set -# CONFIG_CIFS_DEBUG2 is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -993,6 +1069,14 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set +# +# Distributed Lock Manager +# +CONFIG_DLM=m +CONFIG_DLM_TCP=y +# CONFIG_DLM_SCTP is not set +# CONFIG_DLM_DEBUG is not set + # # Profiling support # @@ -1003,11 +1087,13 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" @@ -1022,18 +1108,30 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y # Cryptographic options # CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_CAST5=m @@ -1045,6 +1143,7 @@ CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_CAMELLIA=m # CONFIG_CRYPTO_TEST is not set # @@ -1054,6 +1153,7 @@ CONFIG_CRYPTO_CRC32C=m # # Library routines # +CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC32=y @@ -1065,3 +1165,5 @@ CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/pb1500_defconfig b/arch/mips/configs/pb1500_defconfig index a77805af0819..34a6bee589bd 100644 --- a/arch/mips/configs/pb1500_defconfig +++ b/arch/mips/configs/pb1500_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc1 -# Thu Jul 6 10:04:17 2006 +# Linux kernel version: 2.6.20 +# Sun Feb 18 21:28:02 2007 # CONFIG_MIPS=y # # Machine selection # +CONFIG_ZONE_DMA=y # CONFIG_MIPS_MTX1 is not set # CONFIG_MIPS_BOSPORUS is not set # CONFIG_MIPS_PB1000 is not set @@ -25,8 +26,6 @@ CONFIG_MIPS_PB1500=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_IVR is not set -# CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set @@ -42,6 +41,7 @@ CONFIG_MIPS_PB1500=y # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_V2PCI is not set # CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set # CONFIG_DDB5477 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set @@ -64,14 +64,19 @@ CONFIG_MIPS_PB1500=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y # CONFIG_CPU_BIG_ENDIAN is not set CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y CONFIG_SOC_AU1500=y CONFIG_SOC_AU1X00=y @@ -116,8 +121,8 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_64KB is not set CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set CONFIG_64BIT_PHYS_ADDR=y CONFIG_CPU_HAS_LLSC=y @@ -134,7 +139,8 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set +CONFIG_RESOURCES_64BIT=y +CONFIG_ZONE_DMA_FLAG=1 # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -147,6 +153,7 @@ CONFIG_HZ=1000 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +# CONFIG_KEXEC is not set CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -165,15 +172,20 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y CONFIG_RELAY=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -181,12 +193,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y -CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -204,6 +216,7 @@ CONFIG_KMOD=y # # Block layer # +CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set @@ -258,6 +271,10 @@ CONFIG_PCCARD_NONSTATIC=m CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_TRAD_SIGNALS=y + +# +# Power management options +# # CONFIG_PM is not set # @@ -274,7 +291,10 @@ CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=m +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set @@ -295,10 +315,13 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_TCP_MD5SIG=y # # IP: Virtual Server Configuration @@ -317,15 +340,42 @@ CONFIG_NETFILTER=y CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m -# CONFIG_NF_CONNTRACK is not set +CONFIG_NF_CONNTRACK_ENABLED=m +CONFIG_NF_CONNTRACK_SUPPORT=y +# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CT_ACCT=y +CONFIG_NF_CONNTRACK_MARK=y +CONFIG_NF_CONNTRACK_SECMARK=y +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_SECMARK=m +CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m @@ -336,14 +386,17 @@ CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_QUOTA=m CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STATE=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m # # IP: Netfilter Configuration # -# CONFIG_IP_NF_CONNTRACK is not set +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -371,7 +424,6 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -427,11 +479,13 @@ CONFIG_MTD_PARTITIONS=y # User Modules And Translation Layers # CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set # # RAM/ROM/Flash chip drivers @@ -487,6 +541,7 @@ CONFIG_MTD_ALCHEMY=y # NAND Flash Device Drivers # # CONFIG_MTD_NAND is not set +# CONFIG_MTD_NAND_CAFE is not set # # OneNAND Flash Device Drivers @@ -521,10 +576,17 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m +# +# Misc devices +# +CONFIG_SGI_IOC4=m +# CONFIG_TIFM_CORE is not set + # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # @@ -534,6 +596,7 @@ CONFIG_BLK_DEV_IDE=y CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set CONFIG_BLK_DEV_IDECS=m +# CONFIG_BLK_DEV_DELKIN is not set # CONFIG_BLK_DEV_IDECD is not set # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set @@ -561,8 +624,10 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_HPT34X is not set CONFIG_BLK_DEV_HPT366=y +# CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +CONFIG_BLK_DEV_IT8213=m # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set @@ -572,6 +637,7 @@ CONFIG_BLK_DEV_HPT366=y # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set +CONFIG_BLK_DEV_TC86C001=m # CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set @@ -583,6 +649,12 @@ CONFIG_BLK_DEV_IDEDMA=y # CONFIG_RAID_ATTRS=m # CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set # # Multi-device support (RAID and LVM) @@ -633,6 +705,8 @@ CONFIG_LXT_PHY=m CONFIG_CICADA_PHY=m CONFIG_VITESSE_PHY=m CONFIG_SMSC_PHY=m +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set # # Ethernet (10 or 100Mbit) @@ -670,14 +744,17 @@ CONFIG_MIPS_AU1X00_ENET=y # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_QLA3XXX=m # # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3=m # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set +CONFIG_NETXEN_NIC=m # # Token Ring devices @@ -718,6 +795,7 @@ CONFIG_PPP_DEFLATE=m CONFIG_PPP_MPPE=m CONFIG_PPPOE=m # CONFIG_SLIP is not set +CONFIG_SLHC=m # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set @@ -737,6 +815,7 @@ CONFIG_PPPOE=m # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces @@ -815,10 +894,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_DRM is not set # @@ -833,7 +908,6 @@ CONFIG_SYNCLINK_CS=m # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -857,15 +931,10 @@ CONFIG_SYNCLINK_CS=m # CONFIG_HWMON is not set # CONFIG_HWMON_VID is not set -# -# Misc devices -# - # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -877,12 +946,18 @@ CONFIG_VIDEO_V4L2=y # # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set +# +# HID Devices +# +# CONFIG_HID is not set + # # USB support # @@ -945,6 +1020,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y # DMA Devices # +# +# Auxiliary Display support +# + +# +# Virtualization +# + # # File systems # @@ -957,6 +1040,7 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y +# CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y @@ -969,6 +1053,7 @@ CONFIG_REISERFS_FS_SECURITY=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -979,6 +1064,7 @@ CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_GENERIC_ACL=y # # CD-ROM/DVD Filesystems @@ -998,23 +1084,25 @@ CONFIG_FUSE_FS=m # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set +CONFIG_CONFIGFS_FS=m # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set # CONFIG_JFFS2_FS is not set CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set @@ -1043,7 +1131,6 @@ CONFIG_SUNRPC=y CONFIG_SMB_FS=m # CONFIG_SMB_NLS_DEFAULT is not set # CONFIG_CIFS is not set -# CONFIG_CIFS_DEBUG2 is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -1099,6 +1186,14 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set +# +# Distributed Lock Manager +# +CONFIG_DLM=m +CONFIG_DLM_TCP=y +# CONFIG_DLM_SCTP is not set +# CONFIG_DLM_DEBUG is not set + # # Profiling support # @@ -1109,11 +1204,13 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" @@ -1128,18 +1225,30 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y # Cryptographic options # CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_CAST5=m @@ -1151,6 +1260,7 @@ CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_CAMELLIA=m # CONFIG_CRYPTO_TEST is not set # @@ -1160,6 +1270,7 @@ CONFIG_CRYPTO_CRC32C=m # # Library routines # +CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC32=y @@ -1171,3 +1282,5 @@ CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/pb1550_defconfig b/arch/mips/configs/pb1550_defconfig index 8318d74d6adb..e3bff462e62e 100644 --- a/arch/mips/configs/pb1550_defconfig +++ b/arch/mips/configs/pb1550_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc1 -# Thu Jul 6 10:04:17 2006 +# Linux kernel version: 2.6.20 +# Sun Feb 18 21:28:03 2007 # CONFIG_MIPS=y # # Machine selection # +CONFIG_ZONE_DMA=y # CONFIG_MIPS_MTX1 is not set # CONFIG_MIPS_BOSPORUS is not set # CONFIG_MIPS_PB1000 is not set @@ -25,8 +26,6 @@ CONFIG_MIPS_PB1550=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_IVR is not set -# CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set @@ -42,6 +41,7 @@ CONFIG_MIPS_PB1550=y # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_V2PCI is not set # CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set # CONFIG_DDB5477 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set @@ -64,15 +64,20 @@ CONFIG_MIPS_PB1550=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y # CONFIG_CPU_BIG_ENDIAN is not set CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y CONFIG_SOC_AU1550=y CONFIG_SOC_AU1X00=y @@ -117,8 +122,8 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_64KB is not set CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set CONFIG_64BIT_PHYS_ADDR=y CONFIG_CPU_HAS_LLSC=y @@ -135,7 +140,8 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set +CONFIG_RESOURCES_64BIT=y +CONFIG_ZONE_DMA_FLAG=1 # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -148,6 +154,7 @@ CONFIG_HZ=1000 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +# CONFIG_KEXEC is not set CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -166,15 +173,20 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y CONFIG_RELAY=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -182,12 +194,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y -CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -205,6 +217,7 @@ CONFIG_KMOD=y # # Block layer # +CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set @@ -259,6 +272,10 @@ CONFIG_PCCARD_NONSTATIC=m CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_TRAD_SIGNALS=y + +# +# Power management options +# # CONFIG_PM is not set # @@ -275,7 +292,10 @@ CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=m +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set @@ -296,10 +316,13 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_TCP_MD5SIG=y # # IP: Virtual Server Configuration @@ -318,15 +341,42 @@ CONFIG_NETFILTER=y CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m -# CONFIG_NF_CONNTRACK is not set +CONFIG_NF_CONNTRACK_ENABLED=m +CONFIG_NF_CONNTRACK_SUPPORT=y +# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CT_ACCT=y +CONFIG_NF_CONNTRACK_MARK=y +CONFIG_NF_CONNTRACK_SECMARK=y +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_SECMARK=m +CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m @@ -337,14 +387,17 @@ CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_QUOTA=m CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STATE=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m # # IP: Netfilter Configuration # -# CONFIG_IP_NF_CONNTRACK is not set +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -372,7 +425,6 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -428,11 +480,13 @@ CONFIG_MTD_PARTITIONS=y # User Modules And Translation Layers # CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set # # RAM/ROM/Flash chip drivers @@ -488,6 +542,7 @@ CONFIG_MTD_ALCHEMY=y # NAND Flash Device Drivers # # CONFIG_MTD_NAND is not set +# CONFIG_MTD_NAND_CAFE is not set # # OneNAND Flash Device Drivers @@ -522,10 +577,17 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m +# +# Misc devices +# +CONFIG_SGI_IOC4=m +# CONFIG_TIFM_CORE is not set + # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # @@ -535,6 +597,7 @@ CONFIG_BLK_DEV_IDE=y CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set CONFIG_BLK_DEV_IDECS=m +# CONFIG_BLK_DEV_DELKIN is not set # CONFIG_BLK_DEV_IDECD is not set # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set @@ -562,8 +625,10 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_HPT34X is not set CONFIG_BLK_DEV_HPT366=y +# CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +CONFIG_BLK_DEV_IT8213=m # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set @@ -573,6 +638,7 @@ CONFIG_BLK_DEV_HPT366=y # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set +CONFIG_BLK_DEV_TC86C001=m # CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set @@ -584,6 +650,12 @@ CONFIG_BLK_DEV_IDEDMA=y # CONFIG_RAID_ATTRS=m # CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set # # Multi-device support (RAID and LVM) @@ -634,6 +706,8 @@ CONFIG_LXT_PHY=m CONFIG_CICADA_PHY=m CONFIG_VITESSE_PHY=m CONFIG_SMSC_PHY=m +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set # # Ethernet (10 or 100Mbit) @@ -671,14 +745,17 @@ CONFIG_MIPS_AU1X00_ENET=y # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_QLA3XXX=m # # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3=m # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set +CONFIG_NETXEN_NIC=m # # Token Ring devices @@ -711,6 +788,7 @@ CONFIG_PPP_DEFLATE=m CONFIG_PPP_MPPE=m CONFIG_PPPOE=m # CONFIG_SLIP is not set +CONFIG_SLHC=m # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set @@ -730,6 +808,7 @@ CONFIG_PPPOE=m # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces @@ -808,10 +887,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_DRM is not set # @@ -826,7 +901,6 @@ CONFIG_SYNCLINK_CS=m # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -850,15 +924,10 @@ CONFIG_SYNCLINK_CS=m # CONFIG_HWMON is not set # CONFIG_HWMON_VID is not set -# -# Misc devices -# - # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -870,12 +939,18 @@ CONFIG_VIDEO_V4L2=y # # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set +# +# HID Devices +# +# CONFIG_HID is not set + # # USB support # @@ -938,6 +1013,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y # DMA Devices # +# +# Auxiliary Display support +# + +# +# Virtualization +# + # # File systems # @@ -950,6 +1033,7 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y +# CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y @@ -962,6 +1046,7 @@ CONFIG_REISERFS_FS_SECURITY=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -972,6 +1057,7 @@ CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_GENERIC_ACL=y # # CD-ROM/DVD Filesystems @@ -991,23 +1077,25 @@ CONFIG_FUSE_FS=m # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set +CONFIG_CONFIGFS_FS=m # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set # CONFIG_JFFS2_FS is not set CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set @@ -1036,7 +1124,6 @@ CONFIG_SUNRPC=y CONFIG_SMB_FS=m # CONFIG_SMB_NLS_DEFAULT is not set # CONFIG_CIFS is not set -# CONFIG_CIFS_DEBUG2 is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -1092,6 +1179,14 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set +# +# Distributed Lock Manager +# +CONFIG_DLM=m +CONFIG_DLM_TCP=y +# CONFIG_DLM_SCTP is not set +# CONFIG_DLM_DEBUG is not set + # # Profiling support # @@ -1102,11 +1197,13 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" @@ -1121,18 +1218,30 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y # Cryptographic options # CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_CAST5=m @@ -1144,6 +1253,7 @@ CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_CAMELLIA=m # CONFIG_CRYPTO_TEST is not set # @@ -1153,6 +1263,7 @@ CONFIG_CRYPTO_CRC32C=m # # Library routines # +CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC32=y @@ -1164,3 +1275,5 @@ CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/pnx8550-jbs_defconfig b/arch/mips/configs/pnx8550-jbs_defconfig index fcb8fea3052c..009b3f87b44e 100644 --- a/arch/mips/configs/pnx8550-jbs_defconfig +++ b/arch/mips/configs/pnx8550-jbs_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.19-rc2 -# Sat Oct 14 23:01:16 2006 +# Linux kernel version: 2.6.20 +# Sun Feb 18 21:28:04 2007 # CONFIG_MIPS=y # # Machine selection # +CONFIG_ZONE_DMA=y # CONFIG_MIPS_MTX1 is not set # CONFIG_MIPS_BOSPORUS is not set # CONFIG_MIPS_PB1000 is not set @@ -40,6 +41,7 @@ CONFIG_MIPS=y # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_V2PCI is not set CONFIG_PNX8550_JBS=y +# CONFIG_PNX8550_STB810 is not set # CONFIG_DDB5477 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set @@ -62,11 +64,14 @@ CONFIG_PNX8550_JBS=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y # CONFIG_CPU_BIG_ENDIAN is not set @@ -134,6 +139,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -146,6 +152,7 @@ CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +# CONFIG_KEXEC is not set CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -165,6 +172,7 @@ CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set @@ -172,6 +180,7 @@ CONFIG_SYSVIPC=y # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -231,7 +240,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -# CONFIG_PCI_MULTITHREAD_PROBE is not set # CONFIG_PCI_DEBUG is not set CONFIG_MMU=y @@ -252,6 +260,14 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_TRAD_SIGNALS=y +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set + # # Networking # @@ -267,6 +283,7 @@ CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -293,6 +310,7 @@ CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_TCP_MD5SIG=y # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set @@ -350,6 +368,7 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # @@ -392,6 +411,12 @@ CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# +# Misc devices +# +CONFIG_SGI_IOC4=m +# CONFIG_TIFM_CORE is not set + # # ATA/ATAPI/MFM/RLL support # @@ -436,6 +461,7 @@ CONFIG_BLK_DEV_HPT366=y # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +CONFIG_BLK_DEV_IT8213=m # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set @@ -445,6 +471,7 @@ CONFIG_BLK_DEV_HPT366=y # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set +CONFIG_BLK_DEV_TC86C001=m # CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set @@ -456,6 +483,7 @@ CONFIG_BLK_DEV_IDEDMA=y # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_TGT=m CONFIG_SCSI_NETLINK=y CONFIG_SCSI_PROC_FS=y @@ -475,6 +503,7 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_MULTI_LUN is not set CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_LOGGING is not set +CONFIG_SCSI_SCAN_ASYNC=y # # SCSI Transports @@ -518,6 +547,7 @@ CONFIG_ISCSI_TCP=m # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set # # Serial ATA (prod) and Parallel ATA (experimental) drivers @@ -605,7 +635,7 @@ CONFIG_8139TOO_8129=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set -# CONFIG_LAN_SAA9730 is not set +# CONFIG_SC92031 is not set # # Ethernet (1000 Mbit) @@ -625,14 +655,17 @@ CONFIG_8139TOO_8129=y # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set # # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3=m # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set +CONFIG_NETXEN_NIC=m # # Token Ring devices @@ -720,7 +753,10 @@ CONFIG_HW_CONSOLE=y # # Non-8250 serial port support # -# CONFIG_SERIAL_IP3106 is not set +CONFIG_SERIAL_PNX8XXX=y +CONFIG_SERIAL_PNX8XXX_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y @@ -741,10 +777,6 @@ CONFIG_HW_RANDOM=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set @@ -752,7 +784,6 @@ CONFIG_HW_RANDOM=y # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -768,6 +799,7 @@ CONFIG_HW_RANDOM=y # # Dallas's 1-wire bus # +# CONFIG_W1 is not set # # Hardware Monitoring support @@ -776,14 +808,10 @@ CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_HWMON_DEBUG_CHIP is not set -# -# Misc devices -# -# CONFIG_TIFM_CORE is not set - # # Multimedia devices # @@ -813,6 +841,11 @@ CONFIG_DUMMY_CONSOLE=y # # CONFIG_SOUND is not set +# +# HID Devices +# +# CONFIG_HID is not set + # # USB support # @@ -826,8 +859,8 @@ CONFIG_USB=y # Miscellaneous USB options # # CONFIG_USB_DEVICEFS is not set -# CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set # @@ -836,7 +869,8 @@ CONFIG_USB=y # CONFIG_USB_EHCI_HCD is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set @@ -890,7 +924,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set -# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_GTCO is not set # # USB Imaging devices @@ -905,6 +939,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set # CONFIG_USB_USBNET is not set CONFIG_USB_MON=y @@ -935,6 +970,7 @@ CONFIG_USB_MON=y # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set # # USB DSL modem support @@ -990,6 +1026,14 @@ CONFIG_USB_MON=y # DMA Devices # +# +# Auxiliary Display support +# + +# +# Virtualization +# + # # File systems # @@ -1041,7 +1085,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set +CONFIG_CONFIGFS_FS=m # # Miscellaneous filesystems @@ -1136,6 +1180,14 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set +# +# Distributed Lock Manager +# +CONFIG_DLM=m +CONFIG_DLM_TCP=y +# CONFIG_DLM_SCTP is not set +# CONFIG_DLM_DEBUG is not set + # # Profiling support # @@ -1149,28 +1201,29 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set CONFIG_DEBUG_SLAB=y # CONFIG_DEBUG_SLAB_LEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set CONFIG_DEBUG_MUTEXES=y -# CONFIG_DEBUG_RWSEMS is not set # CONFIG_DEBUG_LOCK_ALLOC is not set # CONFIG_PROVE_LOCKING is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set CONFIG_FORCED_INLINING=y -# CONFIG_HEADERS_CHECK is not set # CONFIG_RCU_TORTURE_TEST is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp" @@ -1189,21 +1242,27 @@ CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp" # Cryptographic options # CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=m CONFIG_CRYPTO_MANAGER=m # CONFIG_CRYPTO_HMAC is not set +CONFIG_CRYPTO_XCBC=m # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_LRW=m # CONFIG_CRYPTO_DES is not set +CONFIG_CRYPTO_FCRYPT=m # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_SERPENT is not set @@ -1217,6 +1276,7 @@ CONFIG_CRYPTO_CBC=m # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_CAMELLIA=m # CONFIG_CRYPTO_TEST is not set # @@ -1226,8 +1286,11 @@ CONFIG_CRYPTO_CRC32C=m # # Library routines # +CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/pnx8550-stb810_defconfig b/arch/mips/configs/pnx8550-stb810_defconfig index f38a2c123037..5bd377bdbb2c 100644 --- a/arch/mips/configs/pnx8550-stb810_defconfig +++ b/arch/mips/configs/pnx8550-stb810_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.19 -# Thu Dec 7 16:35:12 2006 +# Linux kernel version: 2.6.20 +# Sun Feb 18 21:28:04 2007 # CONFIG_MIPS=y # # Machine selection # +CONFIG_ZONE_DMA=y # CONFIG_MIPS_MTX1 is not set # CONFIG_MIPS_BOSPORUS is not set # CONFIG_MIPS_PB1000 is not set @@ -58,17 +59,19 @@ CONFIG_PNX8550_STB810=y # CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_CRHINE is not set # CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SNI_RM200_PCI is not set +# CONFIG_SNI_RM is not set # CONFIG_TOSHIBA_JMR3927 is not set # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set -# CONFIG_KEXEC is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y # CONFIG_CPU_BIG_ENDIAN is not set @@ -136,6 +139,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -148,6 +152,7 @@ CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +# CONFIG_KEXEC is not set CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -167,6 +172,7 @@ CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set @@ -234,7 +240,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -# CONFIG_PCI_MULTITHREAD_PROBE is not set # CONFIG_PCI_DEBUG is not set CONFIG_MMU=y @@ -253,6 +258,14 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_TRAD_SIGNALS=y +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set + # # Networking # @@ -268,6 +281,7 @@ CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -351,6 +365,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # @@ -443,6 +458,7 @@ CONFIG_BLK_DEV_HPT366=y # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +CONFIG_BLK_DEV_IT8213=m # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set @@ -452,6 +468,7 @@ CONFIG_BLK_DEV_HPT366=y # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set +CONFIG_BLK_DEV_TC86C001=m # CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set @@ -463,6 +480,7 @@ CONFIG_BLK_DEV_IDEDMA=y # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_TGT=m # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y @@ -482,6 +500,7 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_MULTI_LUN is not set CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_LOGGING is not set +CONFIG_SCSI_SCAN_ASYNC=y # # SCSI Transports @@ -525,6 +544,7 @@ CONFIG_ISCSI_TCP=m # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set # # Serial ATA (prod) and Parallel ATA (experimental) drivers @@ -608,6 +628,7 @@ CONFIG_NATSEMI=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set +# CONFIG_SC92031 is not set # # Ethernet (1000 Mbit) @@ -627,11 +648,13 @@ CONFIG_NATSEMI=y # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set # # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3=m # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set @@ -775,6 +798,7 @@ CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_HWMON_DEBUG_CHIP is not set @@ -807,6 +831,11 @@ CONFIG_DUMMY_CONSOLE=y # # CONFIG_SOUND is not set +# +# HID Devices +# +# CONFIG_HID is not set + # # USB support # @@ -820,9 +849,8 @@ CONFIG_USB=y # Miscellaneous USB options # # CONFIG_USB_DEVICEFS is not set -# CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_MULTITHREAD_PROBE is not set +# CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set # @@ -831,7 +859,8 @@ CONFIG_USB=y # CONFIG_USB_EHCI_HCD is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set @@ -885,6 +914,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set +# CONFIG_USB_GTCO is not set # # USB Imaging devices @@ -986,6 +1016,14 @@ CONFIG_USB_MON=y # DMA Devices # +# +# Auxiliary Display support +# + +# +# Virtualization +# + # # File systems # @@ -1037,7 +1075,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set +CONFIG_CONFIGFS_FS=m # # Miscellaneous filesystems @@ -1132,6 +1170,14 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set +# +# Distributed Lock Manager +# +CONFIG_DLM=m +CONFIG_DLM_TCP=y +# CONFIG_DLM_SCTP is not set +# CONFIG_DLM_DEBUG is not set + # # Profiling support # @@ -1145,28 +1191,29 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +CONFIG_HEADERS_CHECK=y CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set CONFIG_DEBUG_SLAB=y # CONFIG_DEBUG_SLAB_LEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_RWSEMS is not set # CONFIG_DEBUG_LOCK_ALLOC is not set # CONFIG_PROVE_LOCKING is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set CONFIG_FORCED_INLINING=y -CONFIG_HEADERS_CHECK=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp" @@ -1187,8 +1234,10 @@ CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp" CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=m CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=m CONFIG_CRYPTO_MANAGER=m # CONFIG_CRYPTO_HMAC is not set +CONFIG_CRYPTO_XCBC=m # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=m @@ -1197,9 +1246,13 @@ CONFIG_CRYPTO_MD5=m # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_LRW=m # CONFIG_CRYPTO_DES is not set +CONFIG_CRYPTO_FCRYPT=m # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_SERPENT is not set @@ -1213,6 +1266,7 @@ CONFIG_CRYPTO_CBC=m # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_CAMELLIA=m # CONFIG_CRYPTO_TEST is not set # @@ -1222,8 +1276,11 @@ CONFIG_CRYPTO_CRC32C=m # # Library routines # +CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/pnx8550-v2pci_defconfig b/arch/mips/configs/pnx8550-v2pci_defconfig index 5bc3248e50e4..cc694709ba65 100644 --- a/arch/mips/configs/pnx8550-v2pci_defconfig +++ b/arch/mips/configs/pnx8550-v2pci_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.19-rc2 -# Sat Oct 14 23:12:15 2006 +# Linux kernel version: 2.6.20 +# Sun Feb 18 21:28:06 2007 # CONFIG_MIPS=y # # Machine selection # +CONFIG_ZONE_DMA=y # CONFIG_MIPS_MTX1 is not set # CONFIG_MIPS_BOSPORUS is not set # CONFIG_MIPS_PB1000 is not set @@ -40,6 +41,7 @@ CONFIG_MIPS=y # CONFIG_MIPS_XXS1500 is not set CONFIG_PNX8550_V2PCI=y # CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set # CONFIG_DDB5477 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set @@ -62,11 +64,14 @@ CONFIG_PNX8550_V2PCI=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y # CONFIG_CPU_BIG_ENDIAN is not set @@ -134,6 +139,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -146,6 +152,7 @@ CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +# CONFIG_KEXEC is not set CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -165,6 +172,7 @@ CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set @@ -172,6 +180,7 @@ CONFIG_SYSVIPC=y # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -230,7 +239,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -# CONFIG_PCI_MULTITHREAD_PROBE is not set CONFIG_MMU=y # @@ -250,6 +258,14 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_TRAD_SIGNALS=y +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set + # # Networking # @@ -265,6 +281,7 @@ CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -282,7 +299,7 @@ CONFIG_IP_PNP=y # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set +CONFIG_INET_TUNNEL=m CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y @@ -291,6 +308,7 @@ CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_TCP_MD5SIG=y # # IP: Virtual Server Configuration @@ -312,7 +330,6 @@ CONFIG_INET6_XFRM_MODE_BEET=m # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=m # CONFIG_IPV6_TUNNEL is not set -# CONFIG_IPV6_SUBTREES is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y @@ -322,15 +339,38 @@ CONFIG_NETFILTER=y # Core Netfilter Configuration # # CONFIG_NETFILTER_NETLINK is not set -# CONFIG_NF_CONNTRACK is not set +CONFIG_NF_CONNTRACK_ENABLED=m +CONFIG_NF_CONNTRACK_SUPPORT=y +# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CT_ACCT=y +CONFIG_NF_CONNTRACK_MARK=y +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_DCCP=m # CONFIG_NETFILTER_XT_MATCH_DSCP is not set CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m @@ -341,14 +381,17 @@ CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STATE=m # CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m # # IP: Netfilter Configuration # -# CONFIG_IP_NF_CONNTRACK is not set +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -356,6 +399,7 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # # IPv6: Netfilter Configuration (EXPERIMENTAL) # +CONFIG_NF_CONNTRACK_IPV6=m # CONFIG_IP6_NF_QUEUE is not set # CONFIG_IP6_NF_IPTABLES is not set @@ -452,6 +496,12 @@ CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# +# Misc devices +# +CONFIG_SGI_IOC4=m +# CONFIG_TIFM_CORE is not set + # # ATA/ATAPI/MFM/RLL support # @@ -497,6 +547,7 @@ CONFIG_BLK_DEV_CMD64X=y # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +CONFIG_BLK_DEV_IT8213=m # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set @@ -506,6 +557,7 @@ CONFIG_BLK_DEV_CMD64X=y # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set +CONFIG_BLK_DEV_TC86C001=m # CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set @@ -517,6 +569,7 @@ CONFIG_IDEDMA_AUTO=y # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_TGT=m CONFIG_SCSI_NETLINK=y CONFIG_SCSI_PROC_FS=y @@ -536,6 +589,7 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set +CONFIG_SCSI_SCAN_ASYNC=y # # SCSI Transports @@ -584,6 +638,7 @@ CONFIG_AIC7XXX_DEBUG_MASK=0 # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set # # Serial ATA (prod) and Parallel ATA (experimental) drivers @@ -671,7 +726,7 @@ CONFIG_8139TOO=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set -# CONFIG_LAN_SAA9730 is not set +# CONFIG_SC92031 is not set # # Ethernet (1000 Mbit) @@ -691,14 +746,17 @@ CONFIG_8139TOO=y # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set # # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3=m # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set +CONFIG_NETXEN_NIC=m # # Token Ring devices @@ -804,6 +862,7 @@ CONFIG_SERIAL_NONSTANDARD=y # CONFIG_DIGIEPCA is not set # CONFIG_MOXA_INTELLIO is not set # CONFIG_MOXA_SMARTIO is not set +CONFIG_MOXA_SMARTIO_NEW=m # CONFIG_ISI is not set # CONFIG_SYNCLINKMP is not set # CONFIG_SYNCLINK_GT is not set @@ -822,7 +881,10 @@ CONFIG_SERIAL_NONSTANDARD=y # # Non-8250 serial port support # -# CONFIG_SERIAL_IP3106 is not set +CONFIG_SERIAL_PNX8XXX=y +CONFIG_SERIAL_PNX8XXX_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y @@ -843,10 +905,6 @@ CONFIG_HW_RANDOM=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set @@ -854,7 +912,6 @@ CONFIG_HW_RANDOM=y # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -883,6 +940,7 @@ CONFIG_I2C_ALGOBIT=m # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PASEMI is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set # CONFIG_I2C_SIS5595 is not set @@ -918,6 +976,7 @@ CONFIG_I2C_ALGOBIT=m # # Dallas's 1-wire bus # +# CONFIG_W1 is not set # # Hardware Monitoring support @@ -951,6 +1010,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set @@ -961,16 +1021,12 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set -# -# Misc devices -# -# CONFIG_TIFM_CORE is not set - # # Multimedia devices # @@ -991,6 +1047,7 @@ CONFIG_FB=y # CONFIG_FB_CFB_FILLRECT is not set # CONFIG_FB_CFB_COPYAREA is not set # CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set # CONFIG_FB_MODE_HELPERS is not set @@ -1007,6 +1064,7 @@ CONFIG_FB=y # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set # CONFIG_FB_NEOMAGIC is not set @@ -1035,6 +1093,12 @@ CONFIG_DUMMY_CONSOLE=y # # CONFIG_SOUND is not set +# +# HID Devices +# +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + # # USB support # @@ -1048,8 +1112,8 @@ CONFIG_USB=y # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set # @@ -1085,7 +1149,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_LIBUSUAL is not set @@ -1093,7 +1156,6 @@ CONFIG_USB_STORAGE=y # USB Input Devices # CONFIG_USB_HID=y -CONFIG_USB_HIDINPUT=y # CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_HID_FF is not set CONFIG_USB_HIDDEV=y @@ -1109,7 +1171,7 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set -# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_GTCO is not set # # USB Imaging devices @@ -1124,6 +1186,7 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set # CONFIG_USB_USBNET is not set CONFIG_USB_MON=y @@ -1154,6 +1217,7 @@ CONFIG_USB_MON=y # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_TEST is not set # @@ -1210,6 +1274,14 @@ CONFIG_USB_MON=y # DMA Devices # +# +# Auxiliary Display support +# + +# +# Virtualization +# + # # File systems # @@ -1271,7 +1343,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set +CONFIG_CONFIGFS_FS=m # # Miscellaneous filesystems @@ -1367,6 +1439,14 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set +# +# Distributed Lock Manager +# +CONFIG_DLM=m +CONFIG_DLM_TCP=y +# CONFIG_DLM_SCTP is not set +# CONFIG_DLM_DEBUG is not set + # # Profiling support # @@ -1380,10 +1460,10 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" @@ -1397,21 +1477,27 @@ CONFIG_CMDLINE="" # Cryptographic options # CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=m CONFIG_CRYPTO_MANAGER=m # CONFIG_CRYPTO_HMAC is not set +CONFIG_CRYPTO_XCBC=m # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=m # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_LRW=m # CONFIG_CRYPTO_DES is not set +CONFIG_CRYPTO_FCRYPT=m # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_SERPENT is not set @@ -1425,6 +1511,7 @@ CONFIG_CRYPTO_ARC4=m # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_CAMELLIA=m # CONFIG_CRYPTO_TEST is not set # @@ -1434,6 +1521,7 @@ CONFIG_CRYPTO_CRC32C=m # # Library routines # +CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set CONFIG_CRC32=y @@ -1445,3 +1533,5 @@ CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/qemu_defconfig b/arch/mips/configs/qemu_defconfig index aa61f0f030a5..c18c5e71d8ac 100644 --- a/arch/mips/configs/qemu_defconfig +++ b/arch/mips/configs/qemu_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc1 -# Thu Jul 6 10:04:18 2006 +# Linux kernel version: 2.6.20 +# Sun Feb 18 21:28:06 2007 # CONFIG_MIPS=y # # Machine selection # +CONFIG_ZONE_DMA=y # CONFIG_MIPS_MTX1 is not set # CONFIG_MIPS_BOSPORUS is not set # CONFIG_MIPS_PB1000 is not set @@ -25,8 +26,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_IVR is not set -# CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set @@ -42,6 +41,7 @@ CONFIG_MIPS=y # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_V2PCI is not set # CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set # CONFIG_DDB5477 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set @@ -64,16 +64,21 @@ CONFIG_QEMU=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_DMA_COHERENT=y CONFIG_GENERIC_ISA_DMA=y CONFIG_I8259=y CONFIG_CPU_BIG_ENDIAN=y # CONFIG_CPU_LITTLE_ENDIAN is not set CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y +CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y CONFIG_SWAP_IO_SPACE=y CONFIG_MIPS_L1_CACHE_SHIFT=5 CONFIG_HAVE_STD_PC_SERIAL_PORT=y @@ -117,8 +122,8 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_64KB is not set CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set # CONFIG_64BIT_PHYS_ADDR is not set CONFIG_CPU_HAS_LLSC=y @@ -130,9 +135,10 @@ CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_STATIC=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 # CONFIG_HZ_48 is not set CONFIG_HZ_100=y # CONFIG_HZ_128 is not set @@ -164,12 +170,15 @@ CONFIG_LOCALVERSION_AUTO=y # CONFIG_SWAP is not set # CONFIG_SYSVIPC is not set # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y CONFIG_RELAY=y -CONFIG_INITRAMFS_SOURCE="" +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set # CONFIG_HOTPLUG is not set @@ -194,6 +203,7 @@ CONFIG_BASE_SMALL=1 # # Block layer # +CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set @@ -221,7 +231,6 @@ CONFIG_I8253=y # # PCCARD (PCMCIA/CardBus) support # -# CONFIG_PCCARD is not set # # PCI Hotplug Support @@ -234,6 +243,14 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_TRAD_SIGNALS=y +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set + # # Networking # @@ -268,10 +285,12 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set @@ -307,7 +326,6 @@ CONFIG_NETWORK_SECMARK=y # CONFIG_STANDALONE=y # CONFIG_PREVENT_FIRMWARE_BUILD is not set -# CONFIG_FW_LOADER is not set # CONFIG_SYS_HYPERVISOR is not set # @@ -342,6 +360,10 @@ CONFIG_PROC_EVENTS=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# +# Misc devices +# + # # ATA/ATAPI/MFM/RLL support # @@ -352,6 +374,12 @@ CONFIG_PROC_EVENTS=y # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set # # Old CD-ROM drivers (not SCSI, not IDE) @@ -459,6 +487,7 @@ CONFIG_NE2000=y # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces @@ -525,10 +554,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_GEN_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_RAW_DRIVER is not set # @@ -557,15 +582,10 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HWMON is not set # CONFIG_HWMON_VID is not set -# -# Misc devices -# - # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -585,12 +605,19 @@ CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set +# +# HID Devices +# +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + # # USB support # @@ -650,6 +677,14 @@ CONFIG_DUMMY_CONSOLE=y # DMA Devices # +# +# Auxiliary Display support +# + +# +# Virtualization +# + # # File systems # @@ -657,8 +692,9 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_EXT3_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set +CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -668,6 +704,7 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set CONFIG_FUSE_FS=y +CONFIG_GENERIC_ACL=y # # CD-ROM/DVD Filesystems @@ -687,8 +724,10 @@ CONFIG_FUSE_FS=y # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y @@ -709,6 +748,7 @@ CONFIG_RAMFS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_DIRECTIO=y # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -717,7 +757,6 @@ CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set -# CONFIG_CIFS_DEBUG2 is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -737,12 +776,13 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_FS is not set -# CONFIG_UNWIND_INFO is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" @@ -757,14 +797,13 @@ CONFIG_CMDLINE="" # # CONFIG_CRYPTO is not set -# -# Hardware crypto devices -# - # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/rbhma4500_defconfig b/arch/mips/configs/rbhma4500_defconfig index f9e8f41d17f2..678f23217c9a 100644 --- a/arch/mips/configs/rbhma4500_defconfig +++ b/arch/mips/configs/rbhma4500_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc1 -# Thu Jul 6 10:04:19 2006 +# Linux kernel version: 2.6.20 +# Sun Feb 18 21:28:07 2007 # CONFIG_MIPS=y # # Machine selection # +CONFIG_ZONE_DMA=y # CONFIG_MIPS_MTX1 is not set # CONFIG_MIPS_BOSPORUS is not set # CONFIG_MIPS_PB1000 is not set @@ -25,8 +26,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_IVR is not set -# CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set @@ -42,6 +41,7 @@ CONFIG_MIPS=y # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_V2PCI is not set # CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set # CONFIG_DDB5477 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set @@ -71,10 +71,14 @@ CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61=y # CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND is not set # CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_GENERIC_ISA_DMA=y @@ -126,8 +130,8 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_64KB is not set CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y @@ -143,6 +147,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -155,6 +160,7 @@ CONFIG_HZ=1000 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +# CONFIG_KEXEC is not set CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -173,16 +179,22 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_SYSFS_DEPRECATED=y CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -211,6 +223,7 @@ CONFIG_KMOD=y # # Block layer # +CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set @@ -253,6 +266,14 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_TRAD_SIGNALS=y +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set + # # Networking # @@ -267,6 +288,8 @@ CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -285,13 +308,16 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set +CONFIG_INET_TUNNEL=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_TCP_MD5SIG=y # # IP: Virtual Server Configuration @@ -304,11 +330,17 @@ CONFIG_IPV6_ROUTE_INFO=y # CONFIG_INET6_AH is not set # CONFIG_INET6_ESP is not set # CONFIG_INET6_IPCOMP is not set +CONFIG_IPV6_MIP6=y # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set CONFIG_INET6_XFRM_MODE_TRANSPORT=m CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_SIT=m # CONFIG_IPV6_TUNNEL is not set +CONFIG_IPV6_MULTIPLE_TABLES=y +CONFIG_IPV6_SUBTREES=y CONFIG_NETWORK_SECMARK=y CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -319,15 +351,42 @@ CONFIG_NETFILTER=y CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m -# CONFIG_NF_CONNTRACK is not set +CONFIG_NF_CONNTRACK_ENABLED=m +CONFIG_NF_CONNTRACK_SUPPORT=y +# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CT_ACCT=y +CONFIG_NF_CONNTRACK_MARK=y +CONFIG_NF_CONNTRACK_SECMARK=y +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_SECMARK=m +CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m @@ -338,14 +397,17 @@ CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_QUOTA=m CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STATE=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m # # IP: Netfilter Configuration # -# CONFIG_IP_NF_CONNTRACK is not set +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -353,6 +415,7 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # # IPv6: Netfilter Configuration (EXPERIMENTAL) # +CONFIG_NF_CONNTRACK_IPV6=m # CONFIG_IP6_NF_QUEUE is not set # CONFIG_IP6_NF_IPTABLES is not set @@ -379,7 +442,6 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -404,6 +466,7 @@ CONFIG_IEEE80211_CRYPT_TKIP=m CONFIG_IEEE80211_SOFTMAC=m # CONFIG_IEEE80211_SOFTMAC_DEBUG is not set CONFIG_WIRELESS_EXT=y +CONFIG_FIB_RULES=y # # Device Drivers @@ -436,11 +499,13 @@ CONFIG_MTD_PARTITIONS=y # User Modules And Translation Layers # CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set # # RAM/ROM/Flash chip drivers @@ -495,6 +560,7 @@ CONFIG_MTD_CFI_UTIL=y # NAND Flash Device Drivers # # CONFIG_MTD_NAND is not set +# CONFIG_MTD_NAND_CAFE is not set # # OneNAND Flash Device Drivers @@ -527,14 +593,22 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# +# Misc devices +# +CONFIG_SGI_IOC4=m +# CONFIG_TIFM_CORE is not set + # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # @@ -570,8 +644,10 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +CONFIG_BLK_DEV_IT8213=m # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set @@ -581,6 +657,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set +CONFIG_BLK_DEV_TC86C001=m # CONFIG_IDE_ARM is not set # CONFIG_IDE_CHIPSETS is not set CONFIG_BLK_DEV_IDEDMA=y @@ -593,6 +670,12 @@ CONFIG_BLK_DEV_IDEDMA=y # CONFIG_RAID_ATTRS=m # CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set # # Old CD-ROM drivers (not SCSI, not IDE) @@ -648,6 +731,8 @@ CONFIG_LXT_PHY=m CONFIG_CICADA_PHY=m CONFIG_VITESSE_PHY=m CONFIG_SMSC_PHY=m +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set # # Ethernet (10 or 100Mbit) @@ -702,7 +787,7 @@ CONFIG_NET_PCI=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set -# CONFIG_LAN_SAA9730 is not set +# CONFIG_SC92031 is not set # # Ethernet (1000 Mbit) @@ -721,14 +806,18 @@ CONFIG_NET_PCI=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_QLA3XXX=m +# CONFIG_ATL1 is not set # # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3=m # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set +CONFIG_NETXEN_NIC=m # # Token Ring devices @@ -785,6 +874,7 @@ CONFIG_PPP_DEFLATE=m CONFIG_PPP_MPPE=m CONFIG_PPPOE=m # CONFIG_SLIP is not set +CONFIG_SLHC=m # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set @@ -804,6 +894,7 @@ CONFIG_PPPOE=m # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces @@ -826,6 +917,7 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y # CONFIG_MOUSE_SERIAL is not set @@ -868,6 +960,7 @@ CONFIG_VT_HW_CONSOLE_BINDING=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_TXX9=y CONFIG_HAS_TXX9_SERIAL=y +CONFIG_SERIAL_TXX9_NR_UARTS=6 # CONFIG_SERIAL_TXX9_CONSOLE is not set # CONFIG_SERIAL_TXX9_STDSERIAL is not set # CONFIG_SERIAL_JSM is not set @@ -890,10 +983,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set @@ -901,7 +990,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -926,17 +1014,14 @@ CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_VT1211 is not set # CONFIG_HWMON_DEBUG_CHIP is not set -# -# Misc devices -# - # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -952,6 +1037,7 @@ CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set # CONFIG_FB_MODE_HELPERS is not set @@ -971,6 +1057,7 @@ CONFIG_FB_ATY=y CONFIG_FB_ATY_CT=y # CONFIG_FB_ATY_GENERIC_LCD is not set # CONFIG_FB_ATY_GX is not set +# CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set # CONFIG_FB_NEOMAGIC is not set @@ -1001,6 +1088,12 @@ CONFIG_DUMMY_CONSOLE=y # # CONFIG_SOUND is not set +# +# HID Devices +# +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + # # USB support # @@ -1014,8 +1107,8 @@ CONFIG_USB=y # Miscellaneous USB options # # CONFIG_USB_DEVICEFS is not set -# CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set # @@ -1040,14 +1133,12 @@ CONFIG_USB=y # # may also be needed; see USB_STORAGE Help for more information # -# CONFIG_USB_STORAGE is not set # CONFIG_USB_LIBUSUAL is not set # # USB Input Devices # CONFIG_USB_HID=y -CONFIG_USB_HIDINPUT=y # CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_HID_FF is not set CONFIG_USB_HIDDEV=y @@ -1063,6 +1154,7 @@ CONFIG_USB_YEALINK=m # CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set +# CONFIG_USB_GTCO is not set # # USB Imaging devices @@ -1076,6 +1168,7 @@ CONFIG_USB_YEALINK=m # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set # CONFIG_USB_USBNET is not set CONFIG_USB_MON=y @@ -1093,18 +1186,20 @@ CONFIG_USB_MON=y # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set -# CONFIG_USB_CY7C63 is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGETKIT is not set -# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set # # USB DSL modem support @@ -1160,6 +1255,14 @@ CONFIG_USB_MON=y # DMA Devices # +# +# Auxiliary Display support +# + +# +# Virtualization +# + # # File systems # @@ -1170,6 +1273,7 @@ CONFIG_EXT3_FS=m CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set CONFIG_JBD=m # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y @@ -1178,12 +1282,13 @@ CONFIG_REISERFS_FS=m # CONFIG_REISERFS_PROC_INFO is not set # CONFIG_REISERFS_FS_XATTR is not set # CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set +CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=m # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -1194,6 +1299,7 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_GENERIC_ACL=y # # CD-ROM/DVD Filesystems @@ -1218,11 +1324,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y # CONFIG_PROC_KCORE is not set +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set +CONFIG_CONFIGFS_FS=m # # Miscellaneous filesystems @@ -1234,7 +1342,6 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y @@ -1273,7 +1380,6 @@ CONFIG_SUNRPC=y CONFIG_SMB_FS=m # CONFIG_SMB_NLS_DEFAULT is not set # CONFIG_CIFS is not set -# CONFIG_CIFS_DEBUG2 is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -1329,6 +1435,14 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set +# +# Distributed Lock Manager +# +CONFIG_DLM=m +CONFIG_DLM_TCP=y +# CONFIG_DLM_SCTP is not set +# CONFIG_DLM_DEBUG is not set + # # Profiling support # @@ -1339,11 +1453,13 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" @@ -1357,18 +1473,30 @@ CONFIG_CMDLINE="" # Cryptographic options # CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_CAST5=m @@ -1380,6 +1508,7 @@ CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_CAMELLIA=m # CONFIG_CRYPTO_TEST is not set # @@ -1389,6 +1518,7 @@ CONFIG_CRYPTO_CRC32C=m # # Library routines # +CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC32=y @@ -1399,3 +1529,5 @@ CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/rm200_defconfig b/arch/mips/configs/rm200_defconfig index 496aa67b9f82..0417e86ab627 100644 --- a/arch/mips/configs/rm200_defconfig +++ b/arch/mips/configs/rm200_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc1 -# Thu Jul 6 10:04:19 2006 +# Linux kernel version: 2.6.20 +# Sun Feb 18 21:28:09 2007 # CONFIG_MIPS=y # # Machine selection # +CONFIG_ZONE_DMA=y # CONFIG_MIPS_MTX1 is not set # CONFIG_MIPS_BOSPORUS is not set # CONFIG_MIPS_PB1000 is not set @@ -25,8 +26,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_IVR is not set -# CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set @@ -42,6 +41,7 @@ CONFIG_MIPS=y # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_V2PCI is not set # CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set # CONFIG_DDB5477 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set @@ -64,10 +64,14 @@ CONFIG_SNI_RM=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set CONFIG_ARC=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_DMA_NONCOHERENT=y @@ -78,10 +82,10 @@ CONFIG_I8259=y CONFIG_CPU_LITTLE_ENDIAN=y CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +CONFIG_IRQ_CPU=y CONFIG_ARC32=y CONFIG_BOOT_ELF32=y -CONFIG_MIPS_L1_CACHE_SHIFT=5 -CONFIG_HAVE_STD_PC_SERIAL_PORT=y +CONFIG_MIPS_L1_CACHE_SHIFT=4 CONFIG_ARC_CONSOLE=y CONFIG_ARC_MEMORY=y CONFIG_ARC_PROMLIB=y @@ -110,6 +114,7 @@ CONFIG_CPU_R4X00=y # CONFIG_CPU_SB1 is not set CONFIG_SYS_HAS_CPU_R4X00=y CONFIG_SYS_HAS_CPU_R5000=y +CONFIG_SYS_HAS_CPU_R10000=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y @@ -127,8 +132,8 @@ CONFIG_PAGE_SIZE_4KB=y CONFIG_BOARD_SCACHE=y CONFIG_R5000_CPU_SCACHE=y CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set # CONFIG_64BIT_PHYS_ADDR is not set CONFIG_CPU_HAS_LLSC=y @@ -146,6 +151,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -158,6 +164,7 @@ CONFIG_HZ=1000 # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set +# CONFIG_KEXEC is not set CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -176,17 +183,22 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_SYSFS_DEPRECATED=y CONFIG_RELAY=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -194,12 +206,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y -CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -217,6 +229,7 @@ CONFIG_KMOD=y # # Block layer # +CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set @@ -262,6 +275,14 @@ CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m CONFIG_TRAD_SIGNALS=y +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set + # # Networking # @@ -276,7 +297,10 @@ CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=m +CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set @@ -297,10 +321,13 @@ CONFIG_IP_PIMSM_V2=y CONFIG_INET_TUNNEL=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_TCP_MD5SIG=y # # IP: Virtual Server Configuration @@ -313,11 +340,17 @@ CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m +CONFIG_IPV6_MIP6=y CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m CONFIG_INET6_XFRM_MODE_TRANSPORT=m CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_SIT=m CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_MULTIPLE_TABLES=y +CONFIG_IPV6_SUBTREES=y CONFIG_NETWORK_SECMARK=y CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -329,18 +362,43 @@ CONFIG_BRIDGE_NETFILTER=y CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NF_CONNTRACK_ENABLED=m +CONFIG_NF_CONNTRACK_SUPPORT=y +# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CT_ACCT=y +CONFIG_NF_CONNTRACK_MARK=y +CONFIG_NF_CONNTRACK_SECMARK=y +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +CONFIG_NETFILTER_XT_TARGET_DSCP=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NOTRACK=m CONFIG_NETFILTER_XT_TARGET_SECMARK=m # CONFIG_NETFILTER_XT_TARGET_CONNSECMARK is not set +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HELPER=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m @@ -358,60 +416,45 @@ CONFIG_NETFILTER_XT_MATCH_STATE=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m # # IP: Netfilter Configuration # -CONFIG_IP_NF_CONNTRACK=m -# CONFIG_IP_NF_CT_ACCT is not set -CONFIG_IP_NF_CONNTRACK_MARK=y -CONFIG_IP_NF_CONNTRACK_SECMARK=y -CONFIG_IP_NF_CONNTRACK_EVENTS=y -CONFIG_IP_NF_CONNTRACK_NETLINK=m -CONFIG_IP_NF_CT_PROTO_SCTP=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -# CONFIG_IP_NF_NETBIOS_NS is not set -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m -CONFIG_IP_NF_PPTP=m -CONFIG_IP_NF_H323=m -CONFIG_IP_NF_SIP=m +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_IPRANGE=m CONFIG_IP_NF_MATCH_TOS=m CONFIG_IP_NF_MATCH_RECENT=m CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_MATCH_OWNER=m CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_NAT_PPTP=m -CONFIG_IP_NF_NAT_H323=m -CONFIG_IP_NF_NAT_SIP=m +CONFIG_NF_NAT_SNMP_BASIC=m +CONFIG_NF_NAT_PROTO_GRE=m +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +CONFIG_NF_NAT_TFTP=m +CONFIG_NF_NAT_AMANDA=m +CONFIG_NF_NAT_PPTP=m +CONFIG_NF_NAT_H323=m +CONFIG_NF_NAT_SIP=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m CONFIG_IP_NF_TARGET_TTL=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_RAW=m @@ -422,6 +465,7 @@ CONFIG_IP_NF_ARP_MANGLE=m # # IPv6: Netfilter Configuration (EXPERIMENTAL) # +CONFIG_NF_CONNTRACK_IPV6=m CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_RT=m @@ -431,6 +475,7 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_OWNER=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_LOG=m @@ -493,7 +538,6 @@ CONFIG_LLC=m # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -501,6 +545,7 @@ CONFIG_LLC=m # QoS and/or fair queueing # CONFIG_NET_SCHED=y +CONFIG_NET_SCH_FIFO=y CONFIG_NET_SCH_CLK_JIFFIES=y # CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set # CONFIG_NET_SCH_CLK_CPU is not set @@ -575,6 +620,7 @@ CONFIG_IEEE80211_CRYPT_CCMP=m CONFIG_IEEE80211_SOFTMAC=m # CONFIG_IEEE80211_SOFTMAC_DEBUG is not set CONFIG_WIRELESS_EXT=y +CONFIG_FIB_RULES=y # # Device Drivers @@ -606,10 +652,10 @@ CONFIG_PARPORT_PC=m CONFIG_PARPORT_SERIAL=m # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set -CONFIG_PARPORT_NOT_PC=y # CONFIG_PARPORT_GSC is not set # CONFIG_PARPORT_AX88796 is not set CONFIG_PARPORT_1284=y +CONFIG_PARPORT_NOT_PC=y # # Plug and Play support @@ -621,7 +667,6 @@ CONFIG_PARPORT_1284=y # CONFIG_BLK_DEV_FD=m CONFIG_PARIDE=m -CONFIG_PARIDE_PARPORT=m # # Parallel IDE high-level drivers @@ -664,12 +709,19 @@ CONFIG_BLK_DEV_UB=m CONFIG_BLK_DEV_RAM=m CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m +# +# Misc devices +# +CONFIG_SGI_IOC4=m +# CONFIG_TIFM_CORE is not set + # # ATA/ATAPI/MFM/RLL support # @@ -680,6 +732,8 @@ CONFIG_ATA_OVER_ETH=m # CONFIG_RAID_ATTRS=m CONFIG_SCSI=y +CONFIG_SCSI_TGT=m +CONFIG_SCSI_NETLINK=y CONFIG_SCSI_PROC_FS=y # @@ -699,14 +753,17 @@ CONFIG_BLK_DEV_SR_VENDOR=y # CONFIG_SCSI_MULTI_LUN is not set CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_LOGGING is not set +CONFIG_SCSI_SCAN_ASYNC=y # -# SCSI Transport Attributes +# SCSI Transports # CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_FC_ATTRS=y CONFIG_SCSI_ISCSI_ATTRS=m CONFIG_SCSI_SAS_ATTRS=m +CONFIG_SCSI_SAS_LIBSAS=m +# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set # # SCSI low-level drivers @@ -720,14 +777,16 @@ CONFIG_ISCSI_TCP=m # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set +CONFIG_SCSI_AIC94XX=m +# CONFIG_AIC94XX_DEBUG is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_IN2000 is not set +# CONFIG_SCSI_ARCMSR is not set CONFIG_MEGARAID_NEWGEN=y CONFIG_MEGARAID_MM=m CONFIG_MEGARAID_MAILBOX=m # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_SATA is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_DTC3280 is not set @@ -742,17 +801,19 @@ CONFIG_SCSI_IMM=m # CONFIG_SCSI_IZIP_EPP16 is not set # CONFIG_SCSI_IZIP_SLOW_CTR is not set # CONFIG_SCSI_NCR53C406A is not set +# CONFIG_SCSI_SNI_53C710 is not set +# CONFIG_SCSI_STEX is not set CONFIG_SCSI_SYM53C8XX_2=y CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 CONFIG_SCSI_SYM53C8XX_MMIO=y -# CONFIG_SCSI_IPR is not set # CONFIG_SCSI_PAS16 is not set # CONFIG_SCSI_PSI240I is not set # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_DC395x is not set @@ -760,6 +821,12 @@ CONFIG_SCSI_SYM53C8XX_MMIO=y # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set # # Old CD-ROM drivers (not SCSI, not IDE) @@ -780,6 +847,7 @@ CONFIG_MD_RAID5_RESHAPE=y CONFIG_MD_MULTIPATH=m CONFIG_MD_FAULTY=m CONFIG_BLK_DEV_DM=m +# CONFIG_DM_DEBUG is not set # CONFIG_DM_CRYPT is not set CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m @@ -834,6 +902,8 @@ CONFIG_LXT_PHY=m CONFIG_CICADA_PHY=m CONFIG_VITESSE_PHY=m CONFIG_SMSC_PHY=m +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set # # Ethernet (10 or 100Mbit) @@ -868,6 +938,7 @@ CONFIG_NE2000=m # CONFIG_SEEQ8005 is not set CONFIG_NET_PCI=y CONFIG_PCNET32=y +# CONFIG_PCNET32_NAPI is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_AC3200 is not set @@ -888,7 +959,7 @@ CONFIG_EEPRO100=m # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set -# CONFIG_LAN_SAA9730 is not set +# CONFIG_SC92031 is not set # CONFIG_NET_POCKET is not set # @@ -908,14 +979,18 @@ CONFIG_EEPRO100=m CONFIG_VIA_VELOCITY=m # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_QLA3XXX=m +# CONFIG_ATL1 is not set # # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3=m # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set +CONFIG_NETXEN_NIC=m # # Token Ring devices @@ -956,6 +1031,7 @@ CONFIG_PLIP=m # Input device support # CONFIG_INPUT=y +CONFIG_INPUT_FF_MEMLESS=m # # Userland interfaces @@ -978,6 +1054,7 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y # CONFIG_MOUSE_SERIAL is not set @@ -1051,10 +1128,6 @@ CONFIG_RTC=m # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set @@ -1062,7 +1135,6 @@ CONFIG_RTC=m # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -1100,15 +1172,10 @@ CONFIG_W1_CON=y # CONFIG_HWMON is not set # CONFIG_HWMON_VID is not set -# -# Misc devices -# - # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -1129,12 +1196,19 @@ CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set +# +# HID Devices +# +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + # # USB support # @@ -1148,8 +1222,8 @@ CONFIG_USB=m # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set # @@ -1159,9 +1233,11 @@ CONFIG_USB_EHCI_HCD=m # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=m -# CONFIG_USB_OHCI_BIG_ENDIAN is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=m # CONFIG_USB_SL811_HCD is not set @@ -1189,18 +1265,20 @@ CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_LIBUSUAL is not set # # USB Input Devices # CONFIG_USB_HID=m -CONFIG_USB_HIDINPUT=y # CONFIG_USB_HIDINPUT_POWERBOOK is not set CONFIG_HID_FF=y CONFIG_HID_PID=y CONFIG_LOGITECH_FF=y +# CONFIG_PANTHERLORD_FF is not set CONFIG_THRUSTMASTER_FF=y +# CONFIG_ZEROPLUS_FF is not set CONFIG_USB_HIDDEV=y # @@ -1220,6 +1298,7 @@ CONFIG_USB_XPAD=m # CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set +# CONFIG_USB_GTCO is not set # # USB Imaging devices @@ -1234,12 +1313,14 @@ CONFIG_USB_CATC=m CONFIG_USB_KAWETH=m CONFIG_USB_PEGASUS=m CONFIG_USB_RTL8150=m +CONFIG_USB_USBNET_MII=m CONFIG_USB_USBNET=m CONFIG_USB_NET_AX8817X=m CONFIG_USB_NET_CDCETHER=m # CONFIG_USB_NET_GL620A is not set CONFIG_USB_NET_NET1080=m # CONFIG_USB_NET_PLUSB is not set +# CONFIG_USB_NET_MCS7830 is not set # CONFIG_USB_NET_RNDIS_HOST is not set # CONFIG_USB_NET_CDC_SUBSET is not set CONFIG_USB_NET_ZAURUS=m @@ -1255,8 +1336,8 @@ CONFIG_USB_USS720=m # CONFIG_USB_SERIAL=m CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRCABLE is not set CONFIG_USB_SERIAL_AIRPRIME=m -CONFIG_USB_SERIAL_ANYDATA=m # CONFIG_USB_SERIAL_ARK3116 is not set CONFIG_USB_SERIAL_BELKIN=m CONFIG_USB_SERIAL_WHITEHEAT=m @@ -1290,16 +1371,20 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y CONFIG_USB_SERIAL_KLSI=m CONFIG_USB_SERIAL_KOBIL_SCT=m CONFIG_USB_SERIAL_MCT_U232=m +# CONFIG_USB_SERIAL_MOS7720 is not set +# CONFIG_USB_SERIAL_MOS7840 is not set # CONFIG_USB_SERIAL_NAVMAN is not set CONFIG_USB_SERIAL_PL2303=m CONFIG_USB_SERIAL_HP4X=m CONFIG_USB_SERIAL_SAFE=m CONFIG_USB_SERIAL_SAFE_PADDED=y +# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set # CONFIG_USB_SERIAL_TI is not set CONFIG_USB_SERIAL_CYBERJACK=m CONFIG_USB_SERIAL_XIRCOM=m # CONFIG_USB_SERIAL_OPTION is not set CONFIG_USB_SERIAL_OMNINET=m +# CONFIG_USB_SERIAL_DEBUG is not set CONFIG_USB_EZUSB=y # @@ -1307,20 +1392,22 @@ CONFIG_USB_EZUSB=y # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set CONFIG_USB_AUERSWALD=m CONFIG_USB_RIO500=m CONFIG_USB_LEGOTOWER=m CONFIG_USB_LCD=m CONFIG_USB_LED=m -# CONFIG_USB_CY7C63 is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set CONFIG_USB_CYTHERM=m -CONFIG_USB_PHIDGETKIT=m -CONFIG_USB_PHIDGETSERVO=m +# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set CONFIG_USB_SISUSBVGA=m # CONFIG_USB_SISUSBVGA_CON is not set CONFIG_USB_LD=m +# CONFIG_USB_TRANCEVIBRATOR is not set CONFIG_USB_TEST=m # @@ -1377,6 +1464,15 @@ CONFIG_USB_TEST=m # DMA Devices # +# +# Auxiliary Display support +# +# CONFIG_KS0108 is not set + +# +# Virtualization +# + # # File systems # @@ -1387,6 +1483,7 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y @@ -1403,6 +1500,7 @@ CONFIG_XFS_QUOTA=y CONFIG_XFS_SECURITY=y # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_MINIX_FS=m CONFIG_ROMFS_FS=m @@ -1414,6 +1512,7 @@ CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_GENERIC_ACL=y # # CD-ROM/DVD Filesystems @@ -1421,7 +1520,6 @@ CONFIG_FUSE_FS=m CONFIG_ISO9660_FS=m CONFIG_JOLIET=y CONFIG_ZISOFS=y -CONFIG_ZISOFS_FS=m CONFIG_UDF_FS=m CONFIG_UDF_NLS=y @@ -1442,11 +1540,13 @@ CONFIG_NTFS_FS=m # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set +CONFIG_CONFIGFS_FS=m # # Miscellaneous filesystems @@ -1454,6 +1554,7 @@ CONFIG_RAMFS=y CONFIG_ADFS_FS=m # CONFIG_ADFS_FS_RW is not set CONFIG_AFFS_FS=m +# CONFIG_ECRYPT_FS is not set CONFIG_HFS_FS=m # CONFIG_HFSPLUS_FS is not set CONFIG_BEFS_FS=m @@ -1578,6 +1679,14 @@ CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m +# +# Distributed Lock Manager +# +CONFIG_DLM=m +CONFIG_DLM_TCP=y +# CONFIG_DLM_SCTP is not set +# CONFIG_DLM_DEBUG is not set + # # Profiling support # @@ -1588,11 +1697,13 @@ CONFIG_NLS_UTF8=m # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" @@ -1607,18 +1718,30 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y # Cryptographic options # CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_CAST5=m @@ -1630,6 +1753,7 @@ CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_CAMELLIA=m # CONFIG_CRYPTO_TEST is not set # @@ -1639,6 +1763,7 @@ CONFIG_CRYPTO_CRC32C=m # # Library routines # +CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC32=y @@ -1650,3 +1775,5 @@ CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/sb1250-swarm_defconfig b/arch/mips/configs/sb1250-swarm_defconfig index e33c17200b39..533df6fd8b4d 100644 --- a/arch/mips/configs/sb1250-swarm_defconfig +++ b/arch/mips/configs/sb1250-swarm_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc1 -# Thu Jul 6 10:04:19 2006 +# Linux kernel version: 2.6.20 +# Sun Feb 18 21:28:09 2007 # CONFIG_MIPS=y # # Machine selection # +CONFIG_ZONE_DMA=y # CONFIG_MIPS_MTX1 is not set # CONFIG_MIPS_BOSPORUS is not set # CONFIG_MIPS_PB1000 is not set @@ -25,8 +26,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_IVR is not set -# CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set @@ -42,6 +41,7 @@ CONFIG_MIPS=y # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_V2PCI is not set # CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set # CONFIG_DDB5477 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set @@ -81,10 +81,14 @@ CONFIG_SIBYTE_CFE=y # CONFIG_SIBYTE_SB1250_PROF is not set # CONFIG_SIBYTE_TBPROF is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set CONFIG_DMA_COHERENT=y CONFIG_CPU_BIG_ENDIAN=y # CONFIG_CPU_LITTLE_ENDIAN is not set @@ -117,6 +121,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # CONFIG_CPU_RM9000 is not set CONFIG_CPU_SB1=y CONFIG_SYS_HAS_CPU_SB1=y +CONFIG_WEAK_ORDERING=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y @@ -134,8 +139,8 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_SIBYTE_DMA_PAGEOPS is not set CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set CONFIG_SB1_PASS_1_WORKAROUNDS=y CONFIG_CPU_HAS_LLSC=y @@ -155,8 +160,10 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y +CONFIG_ZONE_DMA_FLAG=1 CONFIG_SMP=y CONFIG_SYS_SUPPORTS_SMP=y +CONFIG_NR_CPUS_DEFAULT_2=y CONFIG_NR_CPUS=2 # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set @@ -171,6 +178,7 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_PREEMPT_BKL=y +# CONFIG_KEXEC is not set CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -189,16 +197,22 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_CPUSETS=y +CONFIG_SYSFS_DEPRECATED=y CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -206,12 +220,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y -CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -230,6 +244,7 @@ CONFIG_STOP_MACHINE=y # # Block layer # +CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # @@ -270,10 +285,19 @@ CONFIG_BINFMT_ELF=y # CONFIG_BUILD_ELF64 is not set CONFIG_MIPS32_COMPAT=y CONFIG_COMPAT=y +CONFIG_SYSVIPC_COMPAT=y CONFIG_MIPS32_O32=y # CONFIG_MIPS32_N32 is not set CONFIG_BINFMT_ELF32=y +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set + # # Networking # @@ -288,7 +312,10 @@ CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=m +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set @@ -308,10 +335,13 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_TCP_MD5SIG=y # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set @@ -341,7 +371,6 @@ CONFIG_NETWORK_SECMARK=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -410,16 +439,24 @@ CONFIG_CONNECTOR=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=9220 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 CONFIG_BLK_DEV_INITRD=y CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m +# +# Misc devices +# +CONFIG_SGI_IOC4=m +# CONFIG_TIFM_CORE is not set + # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # @@ -449,6 +486,12 @@ CONFIG_IDE_GENERIC=y # CONFIG_RAID_ATTRS=m # CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set # # Multi-device support (RAID and LVM) @@ -499,6 +542,8 @@ CONFIG_LXT_PHY=m CONFIG_CICADA_PHY=m CONFIG_VITESSE_PHY=m CONFIG_SMSC_PHY=m +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set # # Ethernet (10 or 100Mbit) @@ -535,14 +580,17 @@ CONFIG_NET_SB1250_MAC=y # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_QLA3XXX=m # # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3=m # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set +CONFIG_NETXEN_NIC=m # # Token Ring devices @@ -604,6 +652,7 @@ CONFIG_SERIAL_NONSTANDARD=y # CONFIG_DIGIEPCA is not set # CONFIG_MOXA_INTELLIO is not set # CONFIG_MOXA_SMARTIO is not set +CONFIG_MOXA_SMARTIO_NEW=m # CONFIG_ISI is not set # CONFIG_SYNCLINKMP is not set # CONFIG_SYNCLINK_GT is not set @@ -643,10 +692,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set @@ -654,7 +699,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -678,15 +722,10 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HWMON is not set # CONFIG_HWMON_VID is not set -# -# Misc devices -# - # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -698,6 +737,7 @@ CONFIG_VIDEO_V4L2=y # # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -766,6 +806,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y # DMA Devices # +# +# Auxiliary Display support +# + +# +# Virtualization +# + # # File systems # @@ -775,11 +823,13 @@ CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -809,17 +859,19 @@ CONFIG_FUSE_FS=m # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set +CONFIG_CONFIGFS_FS=m # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set @@ -850,7 +902,6 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set -# CONFIG_CIFS_DEBUG2 is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -867,6 +918,14 @@ CONFIG_MSDOS_PARTITION=y # # CONFIG_NLS is not set +# +# Distributed Lock Manager +# +CONFIG_DLM=m +CONFIG_DLM_TCP=y +# CONFIG_DLM_SCTP is not set +# CONFIG_DLM_DEBUG is not set + # # Profiling support # @@ -877,11 +936,13 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=15 -# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" # CONFIG_SB1XXX_CORELIS is not set @@ -897,18 +958,30 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y # Cryptographic options # CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_CAST5=m @@ -920,6 +993,7 @@ CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_CAMELLIA=m # CONFIG_CRYPTO_TEST is not set # @@ -929,6 +1003,7 @@ CONFIG_CRYPTO_CRC32C=m # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set CONFIG_CRC16=m CONFIG_CRC32=y @@ -936,3 +1011,5 @@ CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/sead_defconfig b/arch/mips/configs/sead_defconfig index 83fb932f9d4b..38816fe264a9 100644 --- a/arch/mips/configs/sead_defconfig +++ b/arch/mips/configs/sead_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc1 -# Thu Jul 6 10:04:20 2006 +# Linux kernel version: 2.6.20 +# Sun Feb 18 21:28:10 2007 # CONFIG_MIPS=y # # Machine selection # +CONFIG_ZONE_DMA=y # CONFIG_MIPS_MTX1 is not set # CONFIG_MIPS_BOSPORUS is not set # CONFIG_MIPS_PB1000 is not set @@ -25,8 +26,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_IVR is not set -# CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set @@ -42,6 +41,7 @@ CONFIG_MIPS_SEAD=y # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_V2PCI is not set # CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set # CONFIG_DDB5477 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set @@ -64,10 +64,14 @@ CONFIG_MIPS_SEAD=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y # CONFIG_CPU_BIG_ENDIAN is not set @@ -120,8 +124,8 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_64KB is not set CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set # CONFIG_64BIT_PHYS_ADDR is not set CONFIG_CPU_HAS_LLSC=y @@ -139,6 +143,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -151,6 +156,7 @@ CONFIG_HZ=1000 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +# CONFIG_KEXEC is not set CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -169,13 +175,18 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y # CONFIG_SWAP is not set CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_UTS_NS is not set # CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set # CONFIG_HOTPLUG is not set @@ -183,12 +194,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y -CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -201,6 +212,7 @@ CONFIG_BASE_SMALL=0 # # Block layer # +CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set @@ -226,7 +238,6 @@ CONFIG_MMU=y # # PCCARD (PCMCIA/CardBus) support # -# CONFIG_PCCARD is not set # # PCI Hotplug Support @@ -239,6 +250,14 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_TRAD_SIGNALS=y +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set + # # Networking # @@ -253,7 +272,6 @@ CONFIG_TRAD_SIGNALS=y # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set # CONFIG_SYS_HYPERVISOR is not set # @@ -283,9 +301,14 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=18432 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set +# +# Misc devices +# + # # ATA/ATAPI/MFM/RLL support # @@ -296,6 +319,12 @@ CONFIG_BLK_DEV_INITRD=y # CONFIG_RAID_ATTRS=y # CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set # # Multi-device support (RAID and LVM) @@ -373,17 +402,12 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_GEN_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_RAW_DRIVER is not set # # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -399,6 +423,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # # Dallas's 1-wire bus # +# CONFIG_W1 is not set # # Hardware Monitoring support @@ -406,15 +431,10 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HWMON is not set # CONFIG_HWMON_VID is not set -# -# Misc devices -# - # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -425,6 +445,7 @@ CONFIG_VIDEO_V4L2=y # # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -491,6 +512,14 @@ CONFIG_VIDEO_V4L2=y # DMA Devices # +# +# Auxiliary Display support +# + +# +# Virtualization +# + # # File systems # @@ -498,10 +527,12 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -530,6 +561,7 @@ CONFIG_FUSE_FS=y # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set @@ -585,12 +617,13 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_FS is not set -# CONFIG_UNWIND_INFO is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" @@ -605,10 +638,6 @@ CONFIG_CMDLINE="" # # CONFIG_CRYPTO is not set -# -# Hardware crypto devices -# - # # Library routines # @@ -617,3 +646,5 @@ CONFIG_CRC16=y # CONFIG_CRC32 is not set # CONFIG_LIBCRC32C is not set CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/tb0226_defconfig b/arch/mips/configs/tb0226_defconfig index e9d4eae45bfa..c2f7c8cea1e8 100644 --- a/arch/mips/configs/tb0226_defconfig +++ b/arch/mips/configs/tb0226_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc1 -# Thu Jul 6 10:04:20 2006 +# Linux kernel version: 2.6.20 +# Sun Feb 18 21:28:11 2007 # CONFIG_MIPS=y # # Machine selection # +CONFIG_ZONE_DMA=y # CONFIG_MIPS_MTX1 is not set # CONFIG_MIPS_BOSPORUS is not set # CONFIG_MIPS_PB1000 is not set @@ -25,8 +26,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_IVR is not set -# CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set @@ -42,6 +41,7 @@ CONFIG_MIPS=y # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_V2PCI is not set # CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set # CONFIG_DDB5477 is not set CONFIG_MACH_VR41XX=y # CONFIG_PMC_YOSEMITE is not set @@ -72,12 +72,15 @@ CONFIG_TANBAC_TB0226=y # CONFIG_VICTOR_MPC30X is not set # CONFIG_ZAO_CAPCELLA is not set CONFIG_PCI_VR41XX=y -# CONFIG_VRC4173 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y # CONFIG_CPU_BIG_ENDIAN is not set @@ -110,6 +113,7 @@ CONFIG_CPU_VR41XX=y # CONFIG_CPU_SB1 is not set CONFIG_SYS_HAS_CPU_VR41XX=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y @@ -123,8 +127,8 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y @@ -139,6 +143,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -151,6 +156,7 @@ CONFIG_HZ=1000 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +# CONFIG_KEXEC is not set CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -169,15 +175,20 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -185,12 +196,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y -CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -208,6 +219,7 @@ CONFIG_KMOD=y # # Block layer # +CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set @@ -249,6 +261,14 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_TRAD_SIGNALS=y +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set + # # Networking # @@ -263,6 +283,8 @@ CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -290,10 +312,13 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_TCP_MD5SIG=y # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set @@ -323,7 +348,6 @@ CONFIG_NETWORK_SECMARK=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -340,6 +364,7 @@ CONFIG_NETWORK_SECMARK=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_IEEE80211 is not set +CONFIG_FIB_RULES=y # # Device Drivers @@ -388,10 +413,17 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# +# Misc devices +# +CONFIG_SGI_IOC4=m +# CONFIG_TIFM_CORE is not set + # # ATA/ATAPI/MFM/RLL support # @@ -402,6 +434,8 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_TGT=m +# CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y # @@ -420,14 +454,17 @@ CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set +CONFIG_SCSI_SCAN_ASYNC=y # -# SCSI Transport Attributes +# SCSI Transports # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set +CONFIG_SCSI_SAS_ATTRS=m +CONFIG_SCSI_SAS_LIBSAS=m +# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set # # SCSI low-level drivers @@ -440,26 +477,35 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set +CONFIG_SCSI_AIC94XX=m +# CONFIG_AIC94XX_DEBUG is not set # CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_SATA is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set # # Multi-device support (RAID and LVM) @@ -513,6 +559,8 @@ CONFIG_LXT_PHY=m CONFIG_CICADA_PHY=m CONFIG_VITESSE_PHY=m CONFIG_SMSC_PHY=m +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set # # Ethernet (10 or 100Mbit) @@ -549,7 +597,7 @@ CONFIG_E100=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set -# CONFIG_LAN_SAA9730 is not set +# CONFIG_SC92031 is not set # # Ethernet (1000 Mbit) @@ -568,14 +616,18 @@ CONFIG_E100=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_QLA3XXX=m +# CONFIG_ATL1 is not set # # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3=m # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set +CONFIG_NETXEN_NIC=m # # Token Ring devices @@ -615,6 +667,7 @@ CONFIG_E100=y # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces @@ -682,10 +735,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_TANBAC_TB0219 is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_DRM is not set CONFIG_GPIO_VR41XX=y # CONFIG_RAW_DRIVER is not set @@ -694,7 +743,6 @@ CONFIG_GPIO_VR41XX=y # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -718,15 +766,10 @@ CONFIG_GPIO_VR41XX=y # CONFIG_HWMON is not set # CONFIG_HWMON_VID is not set -# -# Misc devices -# - # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -745,12 +788,19 @@ CONFIG_VIDEO_V4L2=y # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set +# +# HID Devices +# +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + # # USB support # @@ -764,8 +814,8 @@ CONFIG_USB=y # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set # @@ -775,9 +825,11 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set @@ -805,6 +857,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_LIBUSUAL is not set # @@ -829,6 +882,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set +# CONFIG_USB_GTCO is not set # # USB Imaging devices @@ -843,6 +897,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set # CONFIG_USB_USBNET is not set # CONFIG_USB_MON is not set @@ -860,19 +915,21 @@ CONFIG_USB_STORAGE=y # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set -# CONFIG_USB_CY7C63 is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGETKIT is not set -# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_TEST is not set # @@ -918,6 +975,7 @@ CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set # # RTC interfaces @@ -950,6 +1008,14 @@ CONFIG_RTC_DRV_VR41XX=y # DMA Devices # +# +# Auxiliary Display support +# + +# +# Virtualization +# + # # File systems # @@ -957,10 +1023,12 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set +CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set CONFIG_ROMFS_FS=m @@ -971,6 +1039,7 @@ CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y CONFIG_FUSE_FS=m +CONFIG_GENERIC_ACL=y # # CD-ROM/DVD Filesystems @@ -990,11 +1059,13 @@ CONFIG_FUSE_FS=m # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set +CONFIG_CONFIGFS_FS=m # # Miscellaneous filesystems @@ -1036,7 +1107,6 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set -# CONFIG_CIFS_DEBUG2 is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -1053,6 +1123,14 @@ CONFIG_MSDOS_PARTITION=y # # CONFIG_NLS is not set +# +# Distributed Lock Manager +# +CONFIG_DLM=m +CONFIG_DLM_TCP=y +# CONFIG_DLM_SCTP is not set +# CONFIG_DLM_DEBUG is not set + # # Profiling support # @@ -1063,11 +1141,13 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="mem=32M console=ttyVR0,115200" @@ -1080,7 +1160,44 @@ CONFIG_CMDLINE="mem=32M console=ttyVR0,115200" # # Cryptographic options # -# CONFIG_CRYPTO is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_HMAC=m +CONFIG_CRYPTO_XCBC=m +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_CAMELLIA=m +# CONFIG_CRYPTO_TEST is not set # # Hardware crypto devices @@ -1092,6 +1209,9 @@ CONFIG_CMDLINE="mem=32M console=ttyVR0,115200" # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC32 is not set -# CONFIG_LIBCRC32C is not set +CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_DEFLATE=m CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/tb0229_defconfig b/arch/mips/configs/tb0229_defconfig index c19597fb0c32..33b788089ab5 100644 --- a/arch/mips/configs/tb0229_defconfig +++ b/arch/mips/configs/tb0229_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc1 -# Thu Jul 6 10:04:20 2006 +# Linux kernel version: 2.6.20 +# Sun Feb 18 21:28:12 2007 # CONFIG_MIPS=y # # Machine selection # +CONFIG_ZONE_DMA=y # CONFIG_MIPS_MTX1 is not set # CONFIG_MIPS_BOSPORUS is not set # CONFIG_MIPS_PB1000 is not set @@ -25,8 +26,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_IVR is not set -# CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set @@ -42,6 +41,7 @@ CONFIG_MIPS=y # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_V2PCI is not set # CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set # CONFIG_DDB5477 is not set CONFIG_MACH_VR41XX=y # CONFIG_PMC_YOSEMITE is not set @@ -72,12 +72,15 @@ CONFIG_TANBAC_TB022X=y # CONFIG_VICTOR_MPC30X is not set # CONFIG_ZAO_CAPCELLA is not set CONFIG_PCI_VR41XX=y -# CONFIG_VRC4173 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y # CONFIG_CPU_BIG_ENDIAN is not set @@ -110,6 +113,7 @@ CONFIG_CPU_VR41XX=y # CONFIG_CPU_SB1 is not set CONFIG_SYS_HAS_CPU_VR41XX=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y @@ -123,8 +127,8 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y @@ -139,6 +143,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -151,6 +156,7 @@ CONFIG_HZ=1000 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +# CONFIG_KEXEC is not set CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -169,15 +175,20 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -185,12 +196,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y -CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -208,6 +219,7 @@ CONFIG_KMOD=y # # Block layer # +CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set @@ -249,6 +261,14 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_TRAD_SIGNALS=y +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set + # # Networking # @@ -263,6 +283,8 @@ CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -291,10 +313,13 @@ CONFIG_SYN_COOKIES=y CONFIG_INET_TUNNEL=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_TCP_MD5SIG=y # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set @@ -324,7 +349,6 @@ CONFIG_NETWORK_SECMARK=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -341,6 +365,7 @@ CONFIG_NETWORK_SECMARK=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_IEEE80211 is not set +CONFIG_FIB_RULES=y # # Device Drivers @@ -389,10 +414,17 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# +# Misc devices +# +CONFIG_SGI_IOC4=m +# CONFIG_TIFM_CORE is not set + # # ATA/ATAPI/MFM/RLL support # @@ -403,6 +435,12 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set # # Multi-device support (RAID and LVM) @@ -453,6 +491,8 @@ CONFIG_LXT_PHY=m CONFIG_CICADA_PHY=m CONFIG_VITESSE_PHY=m CONFIG_SMSC_PHY=m +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set # # Ethernet (10 or 100Mbit) @@ -489,14 +529,17 @@ CONFIG_R8169=y # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_QLA3XXX=m # # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3=m # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set +CONFIG_NETXEN_NIC=m # # Token Ring devices @@ -535,6 +578,7 @@ CONFIG_R8169=y # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces @@ -602,10 +646,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set CONFIG_TANBAC_TB0219=y - -# -# Ftape, the floppy tape device driver -# # CONFIG_DRM is not set CONFIG_GPIO_VR41XX=y # CONFIG_RAW_DRIVER is not set @@ -614,7 +654,6 @@ CONFIG_GPIO_VR41XX=y # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -630,6 +669,7 @@ CONFIG_GPIO_VR41XX=y # # Dallas's 1-wire bus # +# CONFIG_W1 is not set # # Hardware Monitoring support @@ -637,15 +677,10 @@ CONFIG_GPIO_VR41XX=y # CONFIG_HWMON is not set # CONFIG_HWMON_VID is not set -# -# Misc devices -# - # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -664,12 +699,19 @@ CONFIG_VIDEO_V4L2=y # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set +# +# HID Devices +# +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + # # USB support # @@ -683,8 +725,8 @@ CONFIG_USB=m # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set # @@ -694,9 +736,11 @@ CONFIG_USB_EHCI_HCD=m # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=m -# CONFIG_USB_OHCI_BIG_ENDIAN is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set @@ -714,7 +758,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # may also be needed; see USB_STORAGE Help for more information # -# CONFIG_USB_STORAGE is not set # CONFIG_USB_LIBUSUAL is not set # @@ -739,6 +782,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set +# CONFIG_USB_GTCO is not set # # USB Imaging devices @@ -752,6 +796,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set # CONFIG_USB_USBNET is not set CONFIG_USB_MON=y @@ -769,19 +814,21 @@ CONFIG_USB_MON=y # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set -# CONFIG_USB_CY7C63 is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGETKIT is not set -# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_TEST is not set # @@ -827,6 +874,7 @@ CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set # # RTC interfaces @@ -859,6 +907,14 @@ CONFIG_RTC_DRV_VR41XX=y # DMA Devices # +# +# Auxiliary Display support +# + +# +# Virtualization +# + # # File systems # @@ -866,10 +922,12 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set +CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set CONFIG_ROMFS_FS=m @@ -880,6 +938,7 @@ CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y CONFIG_FUSE_FS=m +CONFIG_GENERIC_ACL=y # # CD-ROM/DVD Filesystems @@ -899,11 +958,13 @@ CONFIG_FUSE_FS=m # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set +CONFIG_CONFIGFS_FS=m # # Miscellaneous filesystems @@ -945,7 +1006,6 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set -# CONFIG_CIFS_DEBUG2 is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -962,6 +1022,14 @@ CONFIG_MSDOS_PARTITION=y # # CONFIG_NLS is not set +# +# Distributed Lock Manager +# +CONFIG_DLM=m +CONFIG_DLM_TCP=y +# CONFIG_DLM_SCTP is not set +# CONFIG_DLM_DEBUG is not set + # # Profiling support # @@ -972,11 +1040,13 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs" @@ -989,7 +1059,44 @@ CONFIG_CMDLINE="mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs" # # Cryptographic options # -# CONFIG_CRYPTO is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_HMAC=m +CONFIG_CRYPTO_XCBC=m +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_CAMELLIA=m +# CONFIG_CRYPTO_TEST is not set # # Hardware crypto devices @@ -998,9 +1105,13 @@ CONFIG_CMDLINE="mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs" # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set +CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_DEFLATE=m CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/tb0287_defconfig b/arch/mips/configs/tb0287_defconfig index 97d94f96990f..d180586d6385 100644 --- a/arch/mips/configs/tb0287_defconfig +++ b/arch/mips/configs/tb0287_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.19-rc2 -# Wed Oct 18 12:57:11 2006 +# Linux kernel version: 2.6.20 +# Sun Feb 18 21:28:13 2007 # CONFIG_MIPS=y # # Machine selection # +CONFIG_ZONE_DMA=y # CONFIG_MIPS_MTX1 is not set # CONFIG_MIPS_BOSPORUS is not set # CONFIG_MIPS_PB1000 is not set @@ -40,6 +41,7 @@ CONFIG_MIPS=y # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_V2PCI is not set # CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set # CONFIG_DDB5477 is not set CONFIG_MACH_VR41XX=y # CONFIG_PMC_YOSEMITE is not set @@ -71,11 +73,14 @@ CONFIG_TANBAC_TB0287=y # CONFIG_ZAO_CAPCELLA is not set CONFIG_PCI_VR41XX=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y # CONFIG_CPU_BIG_ENDIAN is not set @@ -108,6 +113,7 @@ CONFIG_CPU_VR41XX=y # CONFIG_CPU_SB1 is not set CONFIG_SYS_HAS_CPU_VR41XX=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y @@ -137,6 +143,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -149,6 +156,7 @@ CONFIG_HZ=1000 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +# CONFIG_KEXEC is not set CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -168,14 +176,15 @@ CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y @@ -233,7 +242,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y -# CONFIG_PCI_MULTITHREAD_PROBE is not set CONFIG_MMU=y # @@ -251,6 +259,14 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_TRAD_SIGNALS=y +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set + # # Networking # @@ -266,6 +282,7 @@ CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -315,6 +332,7 @@ CONFIG_DEFAULT_BIC=y # CONFIG_DEFAULT_WESTWOOD is not set # CONFIG_DEFAULT_RENO is not set CONFIG_DEFAULT_TCP_CONG="bic" +CONFIG_TCP_MD5SIG=y # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set @@ -413,6 +431,12 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# +# Misc devices +# +CONFIG_SGI_IOC4=m +# CONFIG_TIFM_CORE is not set + # # ATA/ATAPI/MFM/RLL support # @@ -423,6 +447,7 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_TGT=m # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y @@ -442,6 +467,7 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set +CONFIG_SCSI_SCAN_ASYNC=y # # SCSI Transports @@ -486,11 +512,13 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set # # Serial ATA (prod) and Parallel ATA (experimental) drivers # CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set @@ -506,6 +534,7 @@ CONFIG_ATA=y # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set @@ -521,8 +550,10 @@ CONFIG_ATA=y # CONFIG_PATA_HPT3X2N is not set # CONFIG_PATA_HPT3X3 is not set # CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set # CONFIG_PATA_JMICRON is not set # CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set @@ -539,6 +570,7 @@ CONFIG_PATA_SIL680=y # CONFIG_PATA_SIS is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set +# CONFIG_PATA_PLATFORM is not set # # Multi-device support (RAID and LVM) @@ -562,10 +594,8 @@ CONFIG_IEEE1394=m # Subsystem Options # # CONFIG_IEEE1394_VERBOSEDEBUG is not set -# CONFIG_IEEE1394_OUI_DB is not set CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y CONFIG_IEEE1394_CONFIG_ROM_IP1394=y -# CONFIG_IEEE1394_EXPORT_FULL_API is not set # # Device Drivers @@ -650,9 +680,11 @@ CONFIG_R8169=y # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3=m # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set +CONFIG_NETXEN_NIC=m # # Token Ring devices @@ -760,10 +792,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_TANBAC_TB0219 is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_DRM is not set CONFIG_GPIO_VR41XX=y # CONFIG_RAW_DRIVER is not set @@ -787,6 +815,7 @@ CONFIG_GPIO_VR41XX=y # # Dallas's 1-wire bus # +# CONFIG_W1 is not set # # Hardware Monitoring support @@ -794,11 +823,6 @@ CONFIG_GPIO_VR41XX=y # CONFIG_HWMON is not set # CONFIG_HWMON_VID is not set -# -# Misc devices -# -# CONFIG_TIFM_CORE is not set - # # Multimedia devices # @@ -818,6 +842,7 @@ CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set # CONFIG_FB_MODE_HELPERS is not set @@ -834,6 +859,7 @@ CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set # CONFIG_FB_NEOMAGIC is not set @@ -862,6 +888,12 @@ CONFIG_DUMMY_CONSOLE=y # # CONFIG_SOUND is not set +# +# HID Devices +# +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + # # USB support # @@ -875,8 +907,8 @@ CONFIG_USB=m # Miscellaneous USB options # # CONFIG_USB_DEVICEFS is not set -# CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set # @@ -886,9 +918,11 @@ CONFIG_USB_EHCI_HCD=m # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=m -# CONFIG_USB_OHCI_BIG_ENDIAN is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set @@ -923,7 +957,6 @@ CONFIG_USB_STORAGE=m # USB Input Devices # CONFIG_USB_HID=m -CONFIG_USB_HIDINPUT=y # CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_HID_FF is not set # CONFIG_USB_HIDDEV is not set @@ -945,7 +978,7 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set -# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_GTCO is not set # # USB Imaging devices @@ -960,6 +993,7 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set # CONFIG_USB_USBNET is not set CONFIG_USB_MON=y @@ -991,6 +1025,7 @@ CONFIG_USB_MON=y # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set # # USB DSL modem support @@ -1046,6 +1081,14 @@ CONFIG_USB_MON=y # DMA Devices # +# +# Auxiliary Display support +# + +# +# Virtualization +# + # # File systems # @@ -1105,7 +1148,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set +CONFIG_CONFIGFS_FS=m # # Miscellaneous filesystems @@ -1158,6 +1201,14 @@ CONFIG_MSDOS_PARTITION=y # # CONFIG_NLS is not set +# +# Distributed Lock Manager +# +CONFIG_DLM=m +CONFIG_DLM_TCP=y +# CONFIG_DLM_SCTP is not set +# CONFIG_DLM_DEBUG is not set + # # Profiling support # @@ -1171,10 +1222,10 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs" @@ -1187,14 +1238,59 @@ CONFIG_CMDLINE="mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs" # # Cryptographic options # -# CONFIG_CRYPTO is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_HMAC=m +CONFIG_CRYPTO_XCBC=m +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_CAMELLIA=m +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set +CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_DEFLATE=m CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/workpad_defconfig b/arch/mips/configs/workpad_defconfig index 553734a47b62..570f0c1475b3 100644 --- a/arch/mips/configs/workpad_defconfig +++ b/arch/mips/configs/workpad_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc2 -# Tue Jul 25 23:13:04 2006 +# Linux kernel version: 2.6.20 +# Sun Feb 18 21:28:13 2007 # CONFIG_MIPS=y # # Machine selection # +CONFIG_ZONE_DMA=y # CONFIG_MIPS_MTX1 is not set # CONFIG_MIPS_BOSPORUS is not set # CONFIG_MIPS_PB1000 is not set @@ -25,8 +26,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_IVR is not set -# CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set @@ -42,6 +41,7 @@ CONFIG_MIPS=y # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_V2PCI is not set # CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set # CONFIG_DDB5477 is not set CONFIG_MACH_VR41XX=y # CONFIG_PMC_YOSEMITE is not set @@ -70,10 +70,14 @@ CONFIG_IBM_WORKPAD=y # CONFIG_VICTOR_MPC30X is not set # CONFIG_ZAO_CAPCELLA is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y # CONFIG_CPU_BIG_ENDIAN is not set @@ -106,6 +110,7 @@ CONFIG_CPU_VR41XX=y # CONFIG_CPU_SB1 is not set CONFIG_SYS_HAS_CPU_VR41XX=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y @@ -119,8 +124,8 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y @@ -135,6 +140,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -147,6 +153,7 @@ CONFIG_HZ=1000 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +# CONFIG_KEXEC is not set CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -165,16 +172,20 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -CONFIG_SYSCTL=y +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -182,12 +193,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y -CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -205,6 +216,7 @@ CONFIG_KMOD=y # # Block layer # +CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set @@ -256,6 +268,14 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_TRAD_SIGNALS=y +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set + # # Networking # @@ -270,7 +290,10 @@ CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=m +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set @@ -288,10 +311,13 @@ CONFIG_IP_FIB_HASH=y # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_TCP_MD5SIG=y # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set @@ -321,7 +347,6 @@ CONFIG_NETWORK_SECMARK=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -386,10 +411,15 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# +# Misc devices +# + # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # @@ -419,6 +449,12 @@ CONFIG_IDE_GENERIC=y # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set # # Old CD-ROM drivers (not SCSI, not IDE) @@ -472,6 +508,8 @@ CONFIG_LXT_PHY=m CONFIG_CICADA_PHY=m CONFIG_VITESSE_PHY=m CONFIG_SMSC_PHY=m +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set # # Ethernet (10 or 100Mbit) @@ -575,6 +613,7 @@ CONFIG_PCMCIA_AXNET=m # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces @@ -640,10 +679,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_DTLK is not set # CONFIG_R3964 is not set -# -# Ftape, the floppy tape device driver -# - # # PCMCIA character devices # @@ -657,7 +692,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -681,15 +715,10 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HWMON is not set # CONFIG_HWMON_VID is not set -# -# Misc devices -# - # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -708,12 +737,19 @@ CONFIG_VIDEO_V4L2=y # CONFIG_VGA_CONSOLE is not set # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set +# +# HID Devices +# +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + # # USB support # @@ -774,6 +810,14 @@ CONFIG_DUMMY_CONSOLE=y # DMA Devices # +# +# Auxiliary Display support +# + +# +# Virtualization +# + # # File systems # @@ -783,11 +827,13 @@ CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -798,6 +844,7 @@ CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y CONFIG_FUSE_FS=m +CONFIG_GENERIC_ACL=y # # CD-ROM/DVD Filesystems @@ -817,11 +864,13 @@ CONFIG_FUSE_FS=m # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set +CONFIG_CONFIGFS_FS=m # # Miscellaneous filesystems @@ -874,6 +923,14 @@ CONFIG_MSDOS_PARTITION=y # # CONFIG_NLS is not set +# +# Distributed Lock Manager +# +CONFIG_DLM=m +CONFIG_DLM_TCP=y +# CONFIG_DLM_SCTP is not set +# CONFIG_DLM_DEBUG is not set + # # Profiling support # @@ -884,11 +941,13 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="console=ttyVR0,19200 ide0=0x170,0x376,49 mem=16M" @@ -901,7 +960,44 @@ CONFIG_CMDLINE="console=ttyVR0,19200 ide0=0x170,0x376,49 mem=16M" # # Cryptographic options # -# CONFIG_CRYPTO is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_HMAC=m +CONFIG_CRYPTO_XCBC=m +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_CAMELLIA=m +# CONFIG_CRYPTO_TEST is not set # # Hardware crypto devices @@ -910,8 +1006,13 @@ CONFIG_CMDLINE="console=ttyVR0,19200 ide0=0x170,0x376,49 mem=16M" # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_DEFLATE=m CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/wrppmc_defconfig b/arch/mips/configs/wrppmc_defconfig index d3dfb702bb7c..08f3190dda89 100644 --- a/arch/mips/configs/wrppmc_defconfig +++ b/arch/mips/configs/wrppmc_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc1 -# Thu Jul 6 10:04:21 2006 +# Linux kernel version: 2.6.20 +# Sun Feb 18 21:28:14 2007 # CONFIG_MIPS=y # # Machine selection # +CONFIG_ZONE_DMA=y # CONFIG_MIPS_MTX1 is not set # CONFIG_MIPS_BOSPORUS is not set # CONFIG_MIPS_PB1000 is not set @@ -25,8 +26,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_IVR is not set -# CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set @@ -42,6 +41,7 @@ CONFIG_WR_PPMC=y # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_V2PCI is not set # CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set # CONFIG_DDB5477 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set @@ -64,10 +64,14 @@ CONFIG_WR_PPMC=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_CPU_BIG_ENDIAN=y @@ -124,8 +128,8 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_64KB is not set CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set # CONFIG_64BIT_PHYS_ADDR is not set CONFIG_CPU_HAS_LLSC=y @@ -143,6 +147,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -155,6 +160,7 @@ CONFIG_HZ=1000 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +# CONFIG_KEXEC is not set CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -173,16 +179,22 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y # CONFIG_SWAP is not set CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y @@ -190,12 +202,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y -CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y # CONFIG_EPOLL is not set CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -213,6 +225,7 @@ CONFIG_MODULE_SRCVERSION_ALL=y # # Block layer # +CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set @@ -257,6 +270,14 @@ CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y CONFIG_TRAD_SIGNALS=y +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set + # # Networking # @@ -271,6 +292,8 @@ CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -294,10 +317,13 @@ CONFIG_ARPD=y # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_TCP_MD5SIG=y # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set @@ -327,7 +353,6 @@ CONFIG_NETWORK_SECMARK=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -390,10 +415,17 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# +# Misc devices +# +CONFIG_SGI_IOC4=m +# CONFIG_TIFM_CORE is not set + # # ATA/ATAPI/MFM/RLL support # @@ -404,6 +436,12 @@ CONFIG_BLK_DEV_INITRD=y # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set # # Multi-device support (RAID and LVM) @@ -454,6 +492,8 @@ CONFIG_PHYLIB=y # CONFIG_CICADA_PHY is not set CONFIG_VITESSE_PHY=m CONFIG_SMSC_PHY=m +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set # # Ethernet (10 or 100Mbit) @@ -490,7 +530,7 @@ CONFIG_E100=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set -# CONFIG_LAN_SAA9730 is not set +# CONFIG_SC92031 is not set # # Ethernet (1000 Mbit) @@ -509,14 +549,18 @@ CONFIG_E100=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_QLA3XXX=m +# CONFIG_ATL1 is not set # # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3=m # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set +CONFIG_NETXEN_NIC=m # # Token Ring devices @@ -602,10 +646,6 @@ CONFIG_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set @@ -613,7 +653,6 @@ CONFIG_RTC=y # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -629,6 +668,7 @@ CONFIG_RTC=y # # Dallas's 1-wire bus # +# CONFIG_W1 is not set # # Hardware Monitoring support @@ -637,17 +677,14 @@ CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_VT1211 is not set # CONFIG_HWMON_DEBUG_CHIP is not set -# -# Misc devices -# - # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -659,6 +696,7 @@ CONFIG_VIDEO_V4L2=y # # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -727,15 +765,25 @@ CONFIG_USB_ARCH_HAS_EHCI=y # DMA Devices # +# +# Auxiliary Display support +# + +# +# Virtualization +# + # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set +CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -746,6 +794,7 @@ CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +CONFIG_GENERIC_ACL=y # # CD-ROM/DVD Filesystems @@ -765,11 +814,13 @@ CONFIG_DNOTIFY=y # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set +CONFIG_CONFIGFS_FS=m # # Miscellaneous filesystems @@ -806,7 +857,6 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set -# CONFIG_CIFS_DEBUG2 is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -823,6 +873,14 @@ CONFIG_MSDOS_PARTITION=y # # CONFIG_NLS is not set +# +# Distributed Lock Manager +# +CONFIG_DLM=m +CONFIG_DLM_TCP=y +# CONFIG_DLM_SCTP is not set +# CONFIG_DLM_DEBUG is not set + # # Profiling support # @@ -833,11 +891,13 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="console=ttyS0,115200n8" @@ -850,7 +910,44 @@ CONFIG_CMDLINE="console=ttyS0,115200n8" # # Cryptographic options # -# CONFIG_CRYPTO is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_HMAC=m +CONFIG_CRYPTO_XCBC=m +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_CAMELLIA=m +# CONFIG_CRYPTO_TEST is not set # # Hardware crypto devices @@ -859,8 +956,13 @@ CONFIG_CMDLINE="console=ttyS0,115200n8" # # Library routines # +CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=y CONFIG_CRC16=y CONFIG_CRC32=y CONFIG_LIBCRC32C=y +CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_DEFLATE=m CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/yosemite_defconfig b/arch/mips/configs/yosemite_defconfig index b9f74d6745ee..aa69fee321d2 100644 --- a/arch/mips/configs/yosemite_defconfig +++ b/arch/mips/configs/yosemite_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc1 -# Thu Jul 6 10:04:21 2006 +# Linux kernel version: 2.6.20 +# Sun Feb 18 21:28:15 2007 # CONFIG_MIPS=y # # Machine selection # +CONFIG_ZONE_DMA=y # CONFIG_MIPS_MTX1 is not set # CONFIG_MIPS_BOSPORUS is not set # CONFIG_MIPS_PB1000 is not set @@ -25,8 +26,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_IVR is not set -# CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set @@ -42,6 +41,7 @@ CONFIG_MIPS=y # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_V2PCI is not set # CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set # CONFIG_DDB5477 is not set # CONFIG_MACH_VR41XX is not set CONFIG_PMC_YOSEMITE=y @@ -65,10 +65,14 @@ CONFIG_PMC_YOSEMITE=y # CONFIG_TOSHIBA_RBTX4938 is not set # CONFIG_HYPERTRANSPORT is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set CONFIG_DMA_COHERENT=y CONFIG_CPU_BIG_ENDIAN=y # CONFIG_CPU_LITTLE_ENDIAN is not set @@ -102,6 +106,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 CONFIG_CPU_RM9000=y # CONFIG_CPU_SB1 is not set CONFIG_SYS_HAS_CPU_RM9000=y +CONFIG_WEAK_ORDERING=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y @@ -118,8 +123,8 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_64KB is not set CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set # CONFIG_64BIT_PHYS_ADDR is not set CONFIG_CPU_HAS_LLSC=y @@ -136,6 +141,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 CONFIG_SMP=y CONFIG_SYS_SUPPORTS_SMP=y CONFIG_NR_CPUS=2 @@ -170,15 +176,20 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set +CONFIG_SYSFS_DEPRECATED=y CONFIG_RELAY=y -CONFIG_INITRAMFS_SOURCE="" +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -187,12 +198,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y -CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -210,6 +221,7 @@ CONFIG_STOP_MACHINE=y # # Block layer # +CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set @@ -251,6 +263,14 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_TRAD_SIGNALS=y +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set + # # Networking # @@ -281,13 +301,15 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set +CONFIG_INET_TUNNEL=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y @@ -298,6 +320,8 @@ CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m CONFIG_INET6_XFRM_MODE_TRANSPORT=m CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +CONFIG_IPV6_SIT=m CONFIG_IPV6_TUNNEL=m CONFIG_NETWORK_SECMARK=y # CONFIG_NETFILTER is not set @@ -336,6 +360,7 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m # CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # @@ -373,6 +398,11 @@ CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_ATA_OVER_ETH=m +# +# Misc devices +# +CONFIG_SGI_IOC4=m + # # ATA/ATAPI/MFM/RLL support # @@ -383,6 +413,12 @@ CONFIG_ATA_OVER_ETH=m # CONFIG_RAID_ATTRS=m # CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set # # Multi-device support (RAID and LVM) @@ -433,6 +469,8 @@ CONFIG_LXT_PHY=m CONFIG_CICADA_PHY=m CONFIG_VITESSE_PHY=m CONFIG_SMSC_PHY=m +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set # # Ethernet (10 or 100Mbit) @@ -463,18 +501,22 @@ CONFIG_MII=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set CONFIG_TITAN_GE=y +CONFIG_QLA3XXX=m # # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3=m # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set +CONFIG_NETXEN_NIC=m # # Token Ring devices @@ -559,10 +601,6 @@ CONFIG_GEN_RTC_X=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set @@ -592,15 +630,10 @@ CONFIG_GEN_RTC_X=y # CONFIG_HWMON is not set # CONFIG_HWMON_VID is not set -# -# Misc devices -# - # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -612,6 +645,7 @@ CONFIG_VIDEO_V4L2=y # # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -679,6 +713,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y # DMA Devices # +# +# Auxiliary Display support +# + +# +# Virtualization +# + # # File systems # @@ -686,8 +728,9 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_EXT3_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set +CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -697,6 +740,7 @@ CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set CONFIG_FUSE_FS=m +CONFIG_GENERIC_ACL=y # # CD-ROM/DVD Filesystems @@ -716,8 +760,10 @@ CONFIG_FUSE_FS=m # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y @@ -737,6 +783,7 @@ CONFIG_RAMFS=y # CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set +# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -744,7 +791,6 @@ CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set -# CONFIG_CIFS_DEBUG2 is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -764,25 +810,31 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set CONFIG_DEBUG_MUTEXES=y -# CONFIG_DEBUG_RWSEMS is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_HIGHMEM is not set # CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_CROSSCOMPILE=y @@ -802,6 +854,10 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y # Cryptographic options # CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_MD4=m @@ -811,9 +867,14 @@ CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_CAST5=m @@ -825,6 +886,7 @@ CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_CAMELLIA=m # CONFIG_CRYPTO_TEST is not set # @@ -834,6 +896,7 @@ CONFIG_CRYPTO_CRC32C=m # # Library routines # +CONFIG_BITREVERSE=m # CONFIG_CRC_CCITT is not set CONFIG_CRC16=m CONFIG_CRC32=m @@ -841,3 +904,5 @@ CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/mips/defconfig b/arch/mips/defconfig index f9812d1e4579..6c2a233e36cb 100644 --- a/arch/mips/defconfig +++ b/arch/mips/defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc1 -# Thu Jul 6 10:04:10 2006 +# Linux kernel version: 2.6.20 +# Sun Feb 18 21:27:34 2007 # CONFIG_MIPS=y # # Machine selection # +CONFIG_ZONE_DMA=y # CONFIG_MIPS_MTX1 is not set # CONFIG_MIPS_BOSPORUS is not set # CONFIG_MIPS_PB1000 is not set @@ -25,8 +26,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_IVR is not set -# CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set @@ -42,6 +41,7 @@ CONFIG_MIPS=y # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_V2PCI is not set # CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set # CONFIG_DDB5477 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set @@ -64,13 +64,18 @@ CONFIG_SGI_IP22=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set CONFIG_ARC=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y +CONFIG_GENERIC_ISA_DMA_SUPPORT_BROKEN=y CONFIG_CPU_BIG_ENDIAN=y # CONFIG_CPU_LITTLE_ENDIAN is not set CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y @@ -123,8 +128,8 @@ CONFIG_PAGE_SIZE_4KB=y CONFIG_BOARD_SCACHE=y CONFIG_IP22_CPU_SCACHE=y CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set # CONFIG_64BIT_PHYS_ADDR is not set CONFIG_CPU_HAS_LLSC=y @@ -141,6 +146,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -153,6 +159,7 @@ CONFIG_HZ=1000 # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set +# CONFIG_KEXEC is not set CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -171,16 +178,21 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_SYSFS_DEPRECATED=y CONFIG_RELAY=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set # CONFIG_HOTPLUG is not set @@ -188,12 +200,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y -CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -211,6 +223,7 @@ CONFIG_KMOD=y # # Block layer # +CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set @@ -238,7 +251,6 @@ CONFIG_MMU=y # # PCCARD (PCMCIA/CardBus) support # -# CONFIG_PCCARD is not set # # PCI Hotplug Support @@ -251,6 +263,14 @@ CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m CONFIG_TRAD_SIGNALS=y +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set + # # Networking # @@ -265,7 +285,10 @@ CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=m +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set @@ -286,10 +309,13 @@ CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_TCP_MD5SIG=y # # IP: Virtual Server Configuration @@ -331,11 +357,17 @@ CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m +CONFIG_IPV6_MIP6=y CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m CONFIG_INET6_XFRM_MODE_TRANSPORT=m CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_SIT=m CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_MULTIPLE_TABLES=y +CONFIG_IPV6_SUBTREES=y CONFIG_NETWORK_SECMARK=y CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -346,19 +378,43 @@ CONFIG_NETFILTER=y CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NF_CONNTRACK_ENABLED=m +CONFIG_NF_CONNTRACK_SUPPORT=y +# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CT_ACCT=y +CONFIG_NF_CONNTRACK_MARK=y +CONFIG_NF_CONNTRACK_SECMARK=y +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +CONFIG_NETFILTER_XT_TARGET_DSCP=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NOTRACK=m CONFIG_NETFILTER_XT_TARGET_SECMARK=m CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HELPER=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m @@ -375,60 +431,45 @@ CONFIG_NETFILTER_XT_MATCH_STATE=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m # # IP: Netfilter Configuration # -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_CT_ACCT=y -CONFIG_IP_NF_CONNTRACK_MARK=y -CONFIG_IP_NF_CONNTRACK_SECMARK=y -CONFIG_IP_NF_CONNTRACK_EVENTS=y -CONFIG_IP_NF_CONNTRACK_NETLINK=m -# CONFIG_IP_NF_CT_PROTO_SCTP is not set -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -# CONFIG_IP_NF_NETBIOS_NS is not set -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m -CONFIG_IP_NF_PPTP=m -CONFIG_IP_NF_H323=m -CONFIG_IP_NF_SIP=m +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_IPRANGE=m CONFIG_IP_NF_MATCH_TOS=m CONFIG_IP_NF_MATCH_RECENT=m CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_MATCH_OWNER=m CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_NAT_PPTP=m -CONFIG_IP_NF_NAT_H323=m -CONFIG_IP_NF_NAT_SIP=m +CONFIG_NF_NAT_SNMP_BASIC=m +CONFIG_NF_NAT_PROTO_GRE=m +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +CONFIG_NF_NAT_TFTP=m +CONFIG_NF_NAT_AMANDA=m +CONFIG_NF_NAT_PPTP=m +CONFIG_NF_NAT_H323=m +CONFIG_NF_NAT_SIP=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m CONFIG_IP_NF_TARGET_TTL=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_RAW=m @@ -439,6 +480,7 @@ CONFIG_IP_NF_ARP_MANGLE=m # # IPv6: Netfilter Configuration (EXPERIMENTAL) # +CONFIG_NF_CONNTRACK_IPV6=m CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_RT=m @@ -448,6 +490,7 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_OWNER=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_LOG=m @@ -484,7 +527,6 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -CONFIG_NET_DIVERT=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -492,6 +534,7 @@ CONFIG_NET_DIVERT=y # QoS and/or fair queueing # CONFIG_NET_SCHED=y +CONFIG_NET_SCH_FIFO=y # CONFIG_NET_SCH_CLK_JIFFIES is not set CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y # CONFIG_NET_SCH_CLK_CPU is not set @@ -546,6 +589,7 @@ CONFIG_IEEE80211_CRYPT_CCMP=m CONFIG_IEEE80211_SOFTMAC=m # CONFIG_IEEE80211_SOFTMAC_DEBUG is not set CONFIG_WIRELESS_EXT=y +CONFIG_FIB_RULES=y # # Device Drivers @@ -556,7 +600,6 @@ CONFIG_WIRELESS_EXT=y # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set # CONFIG_SYS_HYPERVISOR is not set # @@ -591,6 +634,10 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m +# +# Misc devices +# + # # ATA/ATAPI/MFM/RLL support # @@ -601,6 +648,8 @@ CONFIG_ATA_OVER_ETH=m # CONFIG_RAID_ATTRS=m CONFIG_SCSI=y +CONFIG_SCSI_TGT=m +# CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y # @@ -620,23 +669,29 @@ CONFIG_CHR_DEV_SCH=m # CONFIG_SCSI_MULTI_LUN is not set CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_LOGGING is not set +CONFIG_SCSI_SCAN_ASYNC=y # -# SCSI Transport Attributes +# SCSI Transports # CONFIG_SCSI_SPI_ATTRS=m # CONFIG_SCSI_FC_ATTRS is not set CONFIG_SCSI_ISCSI_ATTRS=m CONFIG_SCSI_SAS_ATTRS=m +# CONFIG_SCSI_SAS_LIBSAS is not set # # SCSI low-level drivers # CONFIG_ISCSI_TCP=m CONFIG_SGIWD93_SCSI=y -# CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DEBUG is not set +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set + # # Multi-device support (RAID and LVM) # @@ -679,6 +734,8 @@ CONFIG_LXT_PHY=m CONFIG_CICADA_PHY=m # CONFIG_VITESSE_PHY is not set # CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set # # Ethernet (10 or 100Mbit) @@ -730,6 +787,7 @@ CONFIG_SGISEEQ=y # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces @@ -752,6 +810,7 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=m CONFIG_MOUSE_SERIAL=m @@ -815,10 +874,6 @@ CONFIG_SGI_DS1286=m # CONFIG_GEN_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# CONFIG_RAW_DRIVER=m CONFIG_MAX_RAW_DEVS=256 @@ -826,7 +881,6 @@ CONFIG_MAX_RAW_DEVS=256 # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -850,15 +904,10 @@ CONFIG_MAX_RAW_DEVS=256 # CONFIG_HWMON is not set # CONFIG_HWMON_VID is not set -# -# Misc devices -# - # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -887,12 +936,19 @@ CONFIG_LOGO=y # CONFIG_LOGO_LINUX_VGA16 is not set # CONFIG_LOGO_LINUX_CLUT224 is not set CONFIG_LOGO_SGI_CLUT224=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set +# +# HID Devices +# +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + # # USB support # @@ -953,6 +1009,14 @@ CONFIG_LOGO_SGI_CLUT224=y # DMA Devices # +# +# Auxiliary Display support +# + +# +# Virtualization +# + # # File systems # @@ -963,6 +1027,7 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y +# CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y @@ -974,6 +1039,7 @@ CONFIG_XFS_QUOTA=y CONFIG_XFS_SECURITY=y # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_MINIX_FS=m # CONFIG_ROMFS_FS is not set @@ -987,6 +1053,7 @@ CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_GENERIC_ACL=y # # CD-ROM/DVD Filesystems @@ -994,7 +1061,6 @@ CONFIG_FUSE_FS=m CONFIG_ISO9660_FS=m CONFIG_JOLIET=y CONFIG_ZISOFS=y -CONFIG_ZISOFS_FS=m CONFIG_UDF_FS=m CONFIG_UDF_NLS=y @@ -1013,17 +1079,20 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set +CONFIG_CONFIGFS_FS=m # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set @@ -1141,6 +1210,14 @@ CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m +# +# Distributed Lock Manager +# +CONFIG_DLM=m +CONFIG_DLM_TCP=y +# CONFIG_DLM_SCTP is not set +# CONFIG_DLM_DEBUG is not set + # # Profiling support # @@ -1151,11 +1228,13 @@ CONFIG_NLS_UTF8=m # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_FS is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" @@ -1170,18 +1249,30 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y # Cryptographic options # CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_CAST5=m @@ -1193,6 +1284,7 @@ CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_CAMELLIA=m # CONFIG_CRYPTO_TEST is not set # @@ -1202,6 +1294,7 @@ CONFIG_CRYPTO_CRC32C=m # # Library routines # +CONFIG_BITREVERSE=m # CONFIG_CRC_CCITT is not set CONFIG_CRC16=m CONFIG_CRC32=m @@ -1213,3 +1306,5 @@ CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y -- cgit v1.2.3 From 6168a702ab0be181e5e57a0b2d0e7376f7a47f0b Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Sat, 17 Feb 2007 21:22:39 -0800 Subject: [PATCH] Declare init_irq_proc before we use it. powerpc gets: init/main.c: In function `do_basic_setup': init/main.c:714: warning: implicit declaration of function `init_irq_proc' but we cannot include linux/irq.h in generic code. Fix it by moving the declaration into linux/interrupt.h instead. And make sure all code that defines init_irq_proc() is including linux/interrupt.h. And nuke an ifdef-in-C Cc: Thomas Gleixner Cc: Ingo Molnar Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/h8300/kernel/ints.c | 1 + arch/h8300/platform/h8s/ints.c | 1 + arch/m68k/kernel/ints.c | 1 + arch/m68knommu/platform/5307/ints.c | 1 + 4 files changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/h8300/kernel/ints.c b/arch/h8300/kernel/ints.c index 587ef7f4fcc7..3e4f479271c9 100644 --- a/arch/h8300/kernel/ints.c +++ b/arch/h8300/kernel/ints.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/h8300/platform/h8s/ints.c b/arch/h8300/platform/h8s/ints.c index 567f681ddfec..a71d6e2a3919 100644 --- a/arch/h8300/platform/h8s/ints.c +++ b/arch/h8300/platform/h8s/ints.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/m68k/kernel/ints.c b/arch/m68k/kernel/ints.c index 84aceca6c05c..b66c97c904b3 100644 --- a/arch/m68k/kernel/ints.c +++ b/arch/m68k/kernel/ints.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/m68knommu/platform/5307/ints.c b/arch/m68knommu/platform/5307/ints.c index a57239ec6c8c..20f12a19a522 100644 --- a/arch/m68knommu/platform/5307/ints.c +++ b/arch/m68knommu/platform/5307/ints.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include #include -- cgit v1.2.3 From 575d5e72aab57beb6d5fa2a7d66be9fc681a5e00 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sat, 17 Feb 2007 20:03:21 +0100 Subject: [PATCH] tick management: make broadcast dependent on local APIC The broadcast functionality is only necessary when a local APIC is available. Make the config switch depend on X86_LOCAL_APIC. This resolves the mach-voyager breakage introduced by the tick managament code. Signed-off-by: Thomas Gleixner Signed-off-by: Linus Torvalds --- arch/i386/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig index 1df4a1f14289..2f7672545fe9 100644 --- a/arch/i386/Kconfig +++ b/arch/i386/Kconfig @@ -29,6 +29,7 @@ config GENERIC_CLOCKEVENTS config GENERIC_CLOCKEVENTS_BROADCAST bool default y + depends on X86_LOCAL_APIC config LOCKDEP_SUPPORT bool -- cgit v1.2.3 From cc8010771d04af571eb16bee258d51dc8b620f7f Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sat, 17 Feb 2007 02:58:39 +0000 Subject: [MIPS] Allow selection of KGDB only on platforms where it's supported. Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 14 ++++++++++++++ arch/mips/Kconfig.debug | 5 ++++- 2 files changed, 18 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 46fa5ca9f5ac..c6f74f1c6398 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -144,6 +144,7 @@ config BASLER_EXCITE select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_KGDB help The eXcite is a smart camera platform manufactured by Basler Vision Technologies AG @@ -210,6 +211,7 @@ config MIPS_EV64120 select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_KGDB help This is an evaluation board based on the Galileo GT-64120 single-chip system controller that contains a MIPS R5000 compatible @@ -374,6 +376,7 @@ config MOMENCO_JAGUAR_ATX select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_KGDB help The Jaguar ATX is a MIPS-based Single Board Computer (SBC) made by Momentum Computer . @@ -391,6 +394,7 @@ config MOMENCO_OCELOT select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_KGDB help The Ocelot is a MIPS-based Single Board Computer (SBC) made by Momentum Computer . @@ -480,6 +484,8 @@ config DDB5477 select SYS_HAS_CPU_R5432 select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL + select SYS_SUPPORTS_KGDB + select SYS_SUPPORTS_KGDB select SYS_SUPPORTS_LITTLE_ENDIAN help This enables support for the R5432-based NEC DDB Vrc-5477, @@ -508,6 +514,7 @@ config PMC_YOSEMITE select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_HIGHMEM + select SYS_SUPPORTS_KGDB select SYS_SUPPORTS_SMP help Yosemite is an evaluation board for the RM9000x2 processor @@ -584,6 +591,7 @@ config SGI_IP27 select SYS_HAS_CPU_R10000 select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_KGDB select SYS_SUPPORTS_NUMA select SYS_SUPPORTS_SMP select GENERIC_HARDIRQS_NO__DO_IRQ @@ -633,6 +641,7 @@ config SIBYTE_SWARM select SYS_HAS_CPU_SB1 select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_HIGHMEM + select SYS_SUPPORTS_KGDB select SYS_SUPPORTS_LITTLE_ENDIAN config SIBYTE_SENTOSA @@ -773,6 +782,7 @@ config TOSHIBA_RBTX4927 select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_KGDB select TOSHIBA_BOARDS select GENERIC_HARDIRQS_NO__DO_IRQ help @@ -793,6 +803,7 @@ config TOSHIBA_RBTX4938 select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_KGDB select TOSHIBA_BOARDS select GENERIC_HARDIRQS_NO__DO_IRQ help @@ -959,6 +970,7 @@ config IRQ_MV64340 config DDB5XXX_COMMON bool + select SYS_SUPPORTS_KGDB config MIPS_BOARDS_GEN bool @@ -1007,6 +1019,7 @@ config SOC_AU1X00 select SYS_HAS_CPU_MIPS32_R1 select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_APM_EMULATION + select SYS_SUPPORTS_KGDB config PNX8550 bool @@ -1019,6 +1032,7 @@ config SOC_PNX8550 select SYS_HAS_CPU_MIPS32_R1 select SYS_SUPPORTS_32BIT_KERNEL select GENERIC_HARDIRQS_NO__DO_IRQ + select SYS_SUPPORTS_KGDB config SWAP_IO_SPACE bool diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug index 9351f1c04a9d..d5e60a0c1ded 100644 --- a/arch/mips/Kconfig.debug +++ b/arch/mips/Kconfig.debug @@ -39,7 +39,7 @@ config DEBUG_STACK_USAGE config KGDB bool "Remote GDB kernel debugging" - depends on DEBUG_KERNEL + depends on DEBUG_KERNEL && SYS_SUPPORTS_KGDB select DEBUG_INFO help If you say Y here, it will be possible to remotely debug the MIPS @@ -48,6 +48,9 @@ config KGDB better 32 MB RAM to avoid excessive linking time. This is only useful for kernel hackers. If unsure, say N. +config SYS_SUPPORTS_KGDB + bool + config GDB_CONSOLE bool "Console output to GDB" depends on KGDB -- cgit v1.2.3 From bf15f7679b5cd943758dfd538b852c2ab406bee5 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 19 Feb 2007 15:00:49 +0000 Subject: [MIPS] Declare highstart_pfn, highend_pfn only if CONFIG_HIGHMEM=y Signed-off-by: Ralf Baechle --- arch/mips/mm/init.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c index 13a420844436..f08ae71c46ff 100644 --- a/arch/mips/mm/init.c +++ b/arch/mips/mm/init.c @@ -61,8 +61,6 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); -unsigned long highstart_pfn, highend_pfn; - /* * We have up to 8 empty zeroed pages so we can map one of the right colour * when needed. This is necessary only on R4000 / R4400 SC and MC versions @@ -261,6 +259,8 @@ EXPORT_SYMBOL(copy_from_user_page); #ifdef CONFIG_HIGHMEM +unsigned long highstart_pfn, highend_pfn; + pte_t *kmap_pte; pgprot_t kmap_prot; -- cgit v1.2.3 From f49a747c4adadd96addf4dbf4a44f439513fb29b Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Sun, 18 Feb 2007 01:02:14 +0900 Subject: [MIPS] Make some __setup functions static This fixes some sparse warnings. ("warning: symbol 'foo' was not declared. Should it be static?") Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/kernel/cpu-probe.c | 2 +- arch/mips/kernel/setup.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index 50ed6d58ae71..ab755ea26c6a 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -98,7 +98,7 @@ static void au1k_wait(void) static int __initdata nowait = 0; -int __init wait_disable(char *s) +static int __init wait_disable(char *s) { nowait = 1; diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index 394540fad769..11ab222a2e97 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -543,7 +543,7 @@ void __init setup_arch(char **cmdline_p) #endif } -int __init fpu_disable(char *s) +static int __init fpu_disable(char *s) { int i; @@ -555,7 +555,7 @@ int __init fpu_disable(char *s) __setup("nofpu", fpu_disable); -int __init dsp_disable(char *s) +static int __init dsp_disable(char *s) { cpu_data[0].ases &= ~MIPS_ASE_DSP; -- cgit v1.2.3 From e03b526932a9ae1ff20b47459c040f3c6407f625 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 19 Feb 2007 16:59:24 +0000 Subject: [MIPS] Fixup copy_from_user_inatomic From the 01408c4939479ec46c15aa7ef6e2406be50eeeca log message: The problem is that when we write to a file, the copy from userspace to pagecache is first done with preemption disabled, so if the source address is not immediately available the copy fails *and* *zeros* *the* *destination*. This is a problem because a concurrent read (which admittedly is an odd thing to do) might see zeros rather that was there before the write, or what was there after, or some mixture of the two (any of these being a reasonable thing to see). If the copy did fail, it will immediately be retried with preemption re-enabled so any transient problem with accessing the source won't cause an error. The first copying does not need to zero any uncopied bytes, and doing so causes the problem. It uses copy_from_user_atomic rather than copy_from_user so the simple expedient is to change copy_from_user_atomic to *not* zero out bytes on failure. < --- end cite --- > This patch finally implements at least a not so pretty solution by duplicating the relevant part of __copy_user. Signed-off-by: Ralf Baechle --- arch/mips/lib/Makefile | 2 +- arch/mips/lib/memcpy-inatomic.S | 436 ++++++++++++++++++++++++++++++++++++++++ 2 files changed, 437 insertions(+), 1 deletion(-) create mode 100644 arch/mips/lib/memcpy-inatomic.S (limited to 'arch') diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile index 9e5d985936b3..2453ea244cb8 100644 --- a/arch/mips/lib/Makefile +++ b/arch/mips/lib/Makefile @@ -2,7 +2,7 @@ # Makefile for MIPS-specific library files.. # -lib-y += csum_partial.o memcpy.o memset.o promlib.o \ +lib-y += csum_partial.o memcpy.o memcpy-inatomic.o memset.o promlib.o \ strlen_user.o strncpy_user.o strnlen_user.o uncached.o obj-y += iomap.o diff --git a/arch/mips/lib/memcpy-inatomic.S b/arch/mips/lib/memcpy-inatomic.S new file mode 100644 index 000000000000..3a534b2baa0f --- /dev/null +++ b/arch/mips/lib/memcpy-inatomic.S @@ -0,0 +1,436 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Unified implementation of memcpy, memmove and the __copy_user backend. + * + * Copyright (C) 1998, 99, 2000, 01, 2002 Ralf Baechle (ralf@gnu.org) + * Copyright (C) 1999, 2000, 01, 2002 Silicon Graphics, Inc. + * Copyright (C) 2002 Broadcom, Inc. + * memcpy/copy_user author: Mark Vandevoorde + * + * Mnemonic names for arguments to memcpy/__copy_user + */ + +/* + * Hack to resolve longstanding prefetch issue + * + * Prefetching may be fatal on some systems if we're prefetching beyond the + * end of memory on some systems. It's also a seriously bad idea on non + * dma-coherent systems. + */ +#if !defined(CONFIG_DMA_COHERENT) || !defined(CONFIG_DMA_IP27) +#undef CONFIG_CPU_HAS_PREFETCH +#endif +#ifdef CONFIG_MIPS_MALTA +#undef CONFIG_CPU_HAS_PREFETCH +#endif + +#include +#include +#include + +#define dst a0 +#define src a1 +#define len a2 + +/* + * Spec + * + * memcpy copies len bytes from src to dst and sets v0 to dst. + * It assumes that + * - src and dst don't overlap + * - src is readable + * - dst is writable + * memcpy uses the standard calling convention + * + * __copy_user copies up to len bytes from src to dst and sets a2 (len) to + * the number of uncopied bytes due to an exception caused by a read or write. + * __copy_user assumes that src and dst don't overlap, and that the call is + * implementing one of the following: + * copy_to_user + * - src is readable (no exceptions when reading src) + * copy_from_user + * - dst is writable (no exceptions when writing dst) + * __copy_user uses a non-standard calling convention; see + * include/asm-mips/uaccess.h + * + * When an exception happens on a load, the handler must + # ensure that all of the destination buffer is overwritten to prevent + * leaking information to user mode programs. + */ + +/* + * Implementation + */ + +/* + * The exception handler for loads requires that: + * 1- AT contain the address of the byte just past the end of the source + * of the copy, + * 2- src_entry <= src < AT, and + * 3- (dst - src) == (dst_entry - src_entry), + * The _entry suffix denotes values when __copy_user was called. + * + * (1) is set up up by uaccess.h and maintained by not writing AT in copy_user + * (2) is met by incrementing src by the number of bytes copied + * (3) is met by not doing loads between a pair of increments of dst and src + * + * The exception handlers for stores adjust len (if necessary) and return. + * These handlers do not need to overwrite any data. + * + * For __rmemcpy and memmove an exception is always a kernel bug, therefore + * they're not protected. + */ + +#define EXC(inst_reg,addr,handler) \ +9: inst_reg, addr; \ + .section __ex_table,"a"; \ + PTR 9b, handler; \ + .previous + +/* + * Only on the 64-bit kernel we can made use of 64-bit registers. + */ +#ifdef CONFIG_64BIT +#define USE_DOUBLE +#endif + +#ifdef USE_DOUBLE + +#define LOAD ld +#define LOADL ldl +#define LOADR ldr +#define STOREL sdl +#define STORER sdr +#define STORE sd +#define ADD daddu +#define SUB dsubu +#define SRL dsrl +#define SRA dsra +#define SLL dsll +#define SLLV dsllv +#define SRLV dsrlv +#define NBYTES 8 +#define LOG_NBYTES 3 + +/* + * As we are sharing code base with the mips32 tree (which use the o32 ABI + * register definitions). We need to redefine the register definitions from + * the n64 ABI register naming to the o32 ABI register naming. + */ +#undef t0 +#undef t1 +#undef t2 +#undef t3 +#define t0 $8 +#define t1 $9 +#define t2 $10 +#define t3 $11 +#define t4 $12 +#define t5 $13 +#define t6 $14 +#define t7 $15 + +#else + +#define LOAD lw +#define LOADL lwl +#define LOADR lwr +#define STOREL swl +#define STORER swr +#define STORE sw +#define ADD addu +#define SUB subu +#define SRL srl +#define SLL sll +#define SRA sra +#define SLLV sllv +#define SRLV srlv +#define NBYTES 4 +#define LOG_NBYTES 2 + +#endif /* USE_DOUBLE */ + +#ifdef CONFIG_CPU_LITTLE_ENDIAN +#define LDFIRST LOADR +#define LDREST LOADL +#define STFIRST STORER +#define STREST STOREL +#define SHIFT_DISCARD SLLV +#else +#define LDFIRST LOADL +#define LDREST LOADR +#define STFIRST STOREL +#define STREST STORER +#define SHIFT_DISCARD SRLV +#endif + +#define FIRST(unit) ((unit)*NBYTES) +#define REST(unit) (FIRST(unit)+NBYTES-1) +#define UNIT(unit) FIRST(unit) + +#define ADDRMASK (NBYTES-1) + + .text + .set noreorder + .set noat + +/* + * A combined memcpy/__copy_user + * __copy_user sets len to 0 for success; else to an upper bound of + * the number of uncopied bytes. + * memcpy sets v0 to dst. + */ + .align 5 +LEAF(__copy_user_inatomic) + /* + * Note: dst & src may be unaligned, len may be 0 + * Temps + */ +#define rem t8 + + /* + * The "issue break"s below are very approximate. + * Issue delays for dcache fills will perturb the schedule, as will + * load queue full replay traps, etc. + * + * If len < NBYTES use byte operations. + */ + PREF( 0, 0(src) ) + PREF( 1, 0(dst) ) + sltu t2, len, NBYTES + and t1, dst, ADDRMASK + PREF( 0, 1*32(src) ) + PREF( 1, 1*32(dst) ) + bnez t2, copy_bytes_checklen + and t0, src, ADDRMASK + PREF( 0, 2*32(src) ) + PREF( 1, 2*32(dst) ) + bnez t1, dst_unaligned + nop + bnez t0, src_unaligned_dst_aligned + /* + * use delay slot for fall-through + * src and dst are aligned; need to compute rem + */ +both_aligned: + SRL t0, len, LOG_NBYTES+3 # +3 for 8 units/iter + beqz t0, cleanup_both_aligned # len < 8*NBYTES + and rem, len, (8*NBYTES-1) # rem = len % (8*NBYTES) + PREF( 0, 3*32(src) ) + PREF( 1, 3*32(dst) ) + .align 4 +1: +EXC( LOAD t0, UNIT(0)(src), l_exc) +EXC( LOAD t1, UNIT(1)(src), l_exc_copy) +EXC( LOAD t2, UNIT(2)(src), l_exc_copy) +EXC( LOAD t3, UNIT(3)(src), l_exc_copy) + SUB len, len, 8*NBYTES +EXC( LOAD t4, UNIT(4)(src), l_exc_copy) +EXC( LOAD t7, UNIT(5)(src), l_exc_copy) + STORE t0, UNIT(0)(dst) + STORE t1, UNIT(1)(dst) +EXC( LOAD t0, UNIT(6)(src), l_exc_copy) +EXC( LOAD t1, UNIT(7)(src), l_exc_copy) + ADD src, src, 8*NBYTES + ADD dst, dst, 8*NBYTES + STORE t2, UNIT(-6)(dst) + STORE t3, UNIT(-5)(dst) + STORE t4, UNIT(-4)(dst) + STORE t7, UNIT(-3)(dst) + STORE t0, UNIT(-2)(dst) + STORE t1, UNIT(-1)(dst) + PREF( 0, 8*32(src) ) + PREF( 1, 8*32(dst) ) + bne len, rem, 1b + nop + + /* + * len == rem == the number of bytes left to copy < 8*NBYTES + */ +cleanup_both_aligned: + beqz len, done + sltu t0, len, 4*NBYTES + bnez t0, less_than_4units + and rem, len, (NBYTES-1) # rem = len % NBYTES + /* + * len >= 4*NBYTES + */ +EXC( LOAD t0, UNIT(0)(src), l_exc) +EXC( LOAD t1, UNIT(1)(src), l_exc_copy) +EXC( LOAD t2, UNIT(2)(src), l_exc_copy) +EXC( LOAD t3, UNIT(3)(src), l_exc_copy) + SUB len, len, 4*NBYTES + ADD src, src, 4*NBYTES + STORE t0, UNIT(0)(dst) + STORE t1, UNIT(1)(dst) + STORE t2, UNIT(2)(dst) + STORE t3, UNIT(3)(dst) + beqz len, done + ADD dst, dst, 4*NBYTES +less_than_4units: + /* + * rem = len % NBYTES + */ + beq rem, len, copy_bytes + nop +1: +EXC( LOAD t0, 0(src), l_exc) + ADD src, src, NBYTES + SUB len, len, NBYTES + STORE t0, 0(dst) + bne rem, len, 1b + ADD dst, dst, NBYTES + + /* + * src and dst are aligned, need to copy rem bytes (rem < NBYTES) + * A loop would do only a byte at a time with possible branch + * mispredicts. Can't do an explicit LOAD dst,mask,or,STORE + * because can't assume read-access to dst. Instead, use + * STREST dst, which doesn't require read access to dst. + * + * This code should perform better than a simple loop on modern, + * wide-issue mips processors because the code has fewer branches and + * more instruction-level parallelism. + */ +#define bits t2 + beqz len, done + ADD t1, dst, len # t1 is just past last byte of dst + li bits, 8*NBYTES + SLL rem, len, 3 # rem = number of bits to keep +EXC( LOAD t0, 0(src), l_exc) + SUB bits, bits, rem # bits = number of bits to discard + SHIFT_DISCARD t0, t0, bits + STREST t0, -1(t1) + jr ra + move len, zero +dst_unaligned: + /* + * dst is unaligned + * t0 = src & ADDRMASK + * t1 = dst & ADDRMASK; T1 > 0 + * len >= NBYTES + * + * Copy enough bytes to align dst + * Set match = (src and dst have same alignment) + */ +#define match rem +EXC( LDFIRST t3, FIRST(0)(src), l_exc) + ADD t2, zero, NBYTES +EXC( LDREST t3, REST(0)(src), l_exc_copy) + SUB t2, t2, t1 # t2 = number of bytes copied + xor match, t0, t1 + STFIRST t3, FIRST(0)(dst) + beq len, t2, done + SUB len, len, t2 + ADD dst, dst, t2 + beqz match, both_aligned + ADD src, src, t2 + +src_unaligned_dst_aligned: + SRL t0, len, LOG_NBYTES+2 # +2 for 4 units/iter + PREF( 0, 3*32(src) ) + beqz t0, cleanup_src_unaligned + and rem, len, (4*NBYTES-1) # rem = len % 4*NBYTES + PREF( 1, 3*32(dst) ) +1: +/* + * Avoid consecutive LD*'s to the same register since some mips + * implementations can't issue them in the same cycle. + * It's OK to load FIRST(N+1) before REST(N) because the two addresses + * are to the same unit (unless src is aligned, but it's not). + */ +EXC( LDFIRST t0, FIRST(0)(src), l_exc) +EXC( LDFIRST t1, FIRST(1)(src), l_exc_copy) + SUB len, len, 4*NBYTES +EXC( LDREST t0, REST(0)(src), l_exc_copy) +EXC( LDREST t1, REST(1)(src), l_exc_copy) +EXC( LDFIRST t2, FIRST(2)(src), l_exc_copy) +EXC( LDFIRST t3, FIRST(3)(src), l_exc_copy) +EXC( LDREST t2, REST(2)(src), l_exc_copy) +EXC( LDREST t3, REST(3)(src), l_exc_copy) + PREF( 0, 9*32(src) ) # 0 is PREF_LOAD (not streamed) + ADD src, src, 4*NBYTES +#ifdef CONFIG_CPU_SB1 + nop # improves slotting +#endif + STORE t0, UNIT(0)(dst) + STORE t1, UNIT(1)(dst) + STORE t2, UNIT(2)(dst) + STORE t3, UNIT(3)(dst) + PREF( 1, 9*32(dst) ) # 1 is PREF_STORE (not streamed) + bne len, rem, 1b + ADD dst, dst, 4*NBYTES + +cleanup_src_unaligned: + beqz len, done + and rem, len, NBYTES-1 # rem = len % NBYTES + beq rem, len, copy_bytes + nop +1: +EXC( LDFIRST t0, FIRST(0)(src), l_exc) +EXC( LDREST t0, REST(0)(src), l_exc_copy) + ADD src, src, NBYTES + SUB len, len, NBYTES + STORE t0, 0(dst) + bne len, rem, 1b + ADD dst, dst, NBYTES + +copy_bytes_checklen: + beqz len, done + nop +copy_bytes: + /* 0 < len < NBYTES */ +#define COPY_BYTE(N) \ +EXC( lb t0, N(src), l_exc); \ + SUB len, len, 1; \ + beqz len, done; \ + sb t0, N(dst) + + COPY_BYTE(0) + COPY_BYTE(1) +#ifdef USE_DOUBLE + COPY_BYTE(2) + COPY_BYTE(3) + COPY_BYTE(4) + COPY_BYTE(5) +#endif +EXC( lb t0, NBYTES-2(src), l_exc) + SUB len, len, 1 + jr ra + sb t0, NBYTES-2(dst) +done: + jr ra + nop + END(__copy_user_inatomic) + +l_exc_copy: + /* + * Copy bytes from src until faulting load address (or until a + * lb faults) + * + * When reached by a faulting LDFIRST/LDREST, THREAD_BUADDR($28) + * may be more than a byte beyond the last address. + * Hence, the lb below may get an exception. + * + * Assumes src < THREAD_BUADDR($28) + */ + LOAD t0, TI_TASK($28) + nop + LOAD t0, THREAD_BUADDR(t0) +1: +EXC( lb t1, 0(src), l_exc) + ADD src, src, 1 + sb t1, 0(dst) # can't fault -- we're copy_from_user + bne src, t0, 1b + ADD dst, dst, 1 +l_exc: + LOAD t0, TI_TASK($28) + nop + LOAD t0, THREAD_BUADDR(t0) # t0 is just past last good address + nop + SUB len, AT, t0 # len number of uncopied bytes + jr ra + nop -- cgit v1.2.3 From 0cfd5267476ce8051c4447988d2b0377d09188e8 Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Fri, 9 Feb 2007 12:16:24 +0900 Subject: [MIPS] Cobalt: Fix UART I/O type The Cobalt UART is actually connected to memory resource area. Signed-off-by: Yoichi Yuasa Signed-off-by: Ralf Baechle --- arch/mips/cobalt/setup.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/mips/cobalt/setup.c b/arch/mips/cobalt/setup.c index a4b69b543bd9..415ff8710b55 100644 --- a/arch/mips/cobalt/setup.c +++ b/arch/mips/cobalt/setup.c @@ -130,7 +130,7 @@ void __init plat_mem_setup(void) set_io_port_base(CKSEG1ADDR(GT_DEF_PCI0_IO_BASE)); - /* I/O port resource must include UART and LCD/buttons */ + /* I/O port resource must include LCD/buttons */ ioport_resource.end = 0x0fffffff; /* request I/O space for devices used on all i[345]86 PCs */ @@ -149,24 +149,24 @@ void __init plat_mem_setup(void) register_pci_controller(&cobalt_pci_controller); #endif -#ifdef CONFIG_SERIAL_8250 if (cobalt_board_id > COBALT_BRD_ID_RAQ1) { - #ifdef CONFIG_EARLY_PRINTK cobalt_early_console(); #endif +#ifdef CONFIG_SERIAL_8250 uart.line = 0; uart.type = PORT_UNKNOWN; uart.uartclk = 18432000; uart.irq = COBALT_SERIAL_IRQ; - uart.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST; - uart.iobase = 0xc800000; - uart.iotype = UPIO_PORT; + uart.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF | + UPF_SKIP_TEST; + uart.iotype = UPIO_MEM; + uart.mapbase = 0x1c800000; early_serial_setup(&uart); - } #endif + } } /* -- cgit v1.2.3 From d608e52c361271ccd841b629ca50462756f7b078 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 20 Feb 2007 14:53:28 +0000 Subject: [ARM] Fix build error caused by move of apm CC arch/arm/common/sharpsl_pm.o arch/arm/common/sharpsl_pm.c:30:31: error: asm/apm-emulation.h: No such file or directory ... Signed-off-by: Russell King --- arch/arm/common/sharpsl_pm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/common/sharpsl_pm.c b/arch/arm/common/sharpsl_pm.c index a3b450f8ef17..a9bc5b52218f 100644 --- a/arch/arm/common/sharpsl_pm.c +++ b/arch/arm/common/sharpsl_pm.c @@ -23,11 +23,11 @@ #include #include #include +#include #include #include #include -#include #include #include #include -- cgit v1.2.3 From 6a32b935f8f8eb31877b73f76290ae051279df33 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 20 Feb 2007 14:56:51 +0000 Subject: [ARM] Fix iop13xx build error CC arch/arm/mach-iop13xx/setup.o arch/arm/mach-iop13xx/setup.c: In function 'iq8134x_probe_flash_size': arch/arm/mach-iop13xx/setup.c:210: warning: implicit declaration of function 'ioremap' arch/arm/mach-iop13xx/setup.c:210: warning: initialization makes pointer from integer without a cast arch/arm/mach-iop13xx/setup.c:218: warning: implicit declaration of function 'writew' arch/arm/mach-iop13xx/setup.c:222: warning: implicit declaration of function 'readb' arch/arm/mach-iop13xx/setup.c:231: warning: implicit declaration of function 'iounmap' LD .tmp_vmlinux1 arch/arm/mach-iop13xx/built-in.o: In function `iop13xx_platform_init': iq81340mc.c:(.init.text+0x150): undefined reference to `ioremap' iq81340mc.c:(.init.text+0x21c): undefined reference to `writew' iq81340mc.c:(.init.text+0x24c): undefined reference to `writew' iq81340mc.c:(.init.text+0x254): undefined reference to `iounmap' iq81340mc.c:(.init.text+0x2c4): undefined reference to `readb' iq81340mc.c:(.init.text+0x2e8): undefined reference to `readb' Signed-off-by: Russell King --- arch/arm/mach-iop13xx/setup.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-iop13xx/setup.c b/arch/arm/mach-iop13xx/setup.c index 5fbeb28d04bb..9a46bcd5f18e 100644 --- a/arch/arm/mach-iop13xx/setup.c +++ b/arch/arm/mach-iop13xx/setup.c @@ -24,6 +24,7 @@ #include #include #include +#include #define IOP13XX_UART_XTAL 33334000 #define IOP13XX_SETUP_DEBUG 0 -- cgit v1.2.3 From 4f2849e49cbaf8373163211bb811a8457b46cc4e Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 20 Feb 2007 15:23:57 +0000 Subject: [ARM] Fix jornada720 build errors kernel/built-in.o: In function `pm_suspend': utsname_sysctl.c:(.text+0x23008): multiple definition of `pm_suspend' arch/arm/mach-sa1100/built-in.o:arch/arm/mach-sa1100/sleep.S:(.text+0xf68): first defined here arm-linux-ld: Warning: size of symbol `pm_suspend' changed from 20 in arch/arm/mach-sa1100/built-in.o to 44 in kernel/built-in.o Signed-off-by: Russell King --- arch/arm/mach-sa1100/jornada720.c | 6 ------ 1 file changed, 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c index 54ecdaa373d6..64067cd58d36 100644 --- a/arch/arm/mach-sa1100/jornada720.c +++ b/arch/arm/mach-sa1100/jornada720.c @@ -231,12 +231,6 @@ static struct platform_device *devices[] __initdata = { &s1d13xxxfb_device, }; -/* a stub for now, we theoretically cannot suspend without a flashboard */ -int pm_suspend(suspend_state_t state) -{ - return -1; -} - static int __init jornada720_init(void) { int ret = -ENODEV; -- cgit v1.2.3 From 25ccb569ee52114c01e28a2fe2d451cd43de309c Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 19 Feb 2007 21:28:53 -0800 Subject: [ARM] fix mach-at91 build breakage The rename of the AT91 subtree from mach-at91rm9200 to mach-at91 (to accomodate at91sam926x processors) was incomplete. It needs this patch to be able to build again. Signed-off-by: David Brownell Signed-off-by: Russell King --- arch/arm/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 1320418b5d6f..ab9f2d4bd04e 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -124,7 +124,7 @@ endif machine-$(CONFIG_ARCH_H720X) := h720x machine-$(CONFIG_ARCH_AAEC2000) := aaec2000 machine-$(CONFIG_ARCH_REALVIEW) := realview - machine-$(CONFIG_ARCH_AT91) := at91rm9200 + machine-$(CONFIG_ARCH_AT91) := at91 machine-$(CONFIG_ARCH_EP93XX) := ep93xx machine-$(CONFIG_ARCH_PNX4008) := pnx4008 machine-$(CONFIG_ARCH_NETX) := netx -- cgit v1.2.3 From 7d477a04a619e90ee08724e8f2d8803c6bdfcef8 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 12 Feb 2007 18:59:35 +0100 Subject: [ARM] 4165/1: S3C24XX: Select CONFIG_NO_IOPORT On S3C24XX architecture, select CONFIG_NO_IOPORT as we only have memory based IO. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/plat-s3c24xx/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig index e22343160634..860869528f4c 100644 --- a/arch/arm/plat-s3c24xx/Kconfig +++ b/arch/arm/plat-s3c24xx/Kconfig @@ -8,6 +8,7 @@ config PLAT_S3C24XX bool depends on ARCH_S3C2410 default y if ARCH_S3C2410 + select NO_IOPORT help Base platform code for any Samsung S3C device -- cgit v1.2.3