From a2089ac7f8dc682ef52ed74b52997d36cde76d05 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Cl=C3=A9ment=20P=C3=A9ron?= Date: Sun, 11 Oct 2020 23:15:14 +0200 Subject: arm64: dts: allwinner: pinetab: Drop unnecessary address/size-cells information MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit make dtbs_check warm about unknown address/size-cells property in the pinetab device-tree. This is because these information are not necessary. Drop them. Signed-off-by: Clément Péron Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20201011211514.155266-1-peron.clem@gmail.com --- arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts | 3 --- 1 file changed, 3 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts index 3ab0f0347bc9..0494bfaf2ffa 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts @@ -122,9 +122,6 @@ status = "okay"; port { - #address-cells = <1>; - #size-cells = <0>; - csi_ep: endpoint { remote-endpoint = <&ov5640_ep>; bus-width = <8>; -- cgit v1.2.3 From 97a38c1c213b162aa577299de698f39c18ba696b Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Cl=C3=A9ment=20P=C3=A9ron?= Date: Sun, 18 Oct 2020 19:24:09 +0200 Subject: arm64: dts: allwinner: beelink-gs1: Enable both RGMII RX/TX delay MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Before the commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config"), the software overwrite for RX/TX delays of the RTL8211e were not working properly and the Beelink GS1 had both RX/TX delay of RGMII interface set using pull-up on the TXDLY and RXDLY pins. Now that these delays are working properly they overwrite the HW config and set this to 'rgmii' meaning no delay on both RX/TX. This makes the ethernet of this board not working anymore. Set the phy-mode to 'rgmii-id' meaning RGMII with RX/TX delays in the device-tree to keep the correct configuration. Fixes: 089bee8dd119 ("arm64: dts: allwinner: h6: Introduce Beelink GS1 board") Signed-off-by: Clément Péron Signed-off-by: Maxime Ripard Acked-by: Chen-Yu Tsai Link: https://lore.kernel.org/r/20201018172409.1754775-1-peron.clem@gmail.com --- arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts index 3f7ceeb1a767..7c9dbde645b5 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts @@ -97,7 +97,7 @@ &emac { pinctrl-names = "default"; pinctrl-0 = <&ext_rgmii_pins>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-handle = <&ext_rgmii_phy>; phy-supply = <®_aldo2>; status = "okay"; -- cgit v1.2.3 From 419c65f5000a6c25597ea52488528d75b287cbd0 Mon Sep 17 00:00:00 2001 From: Corentin Labbe Date: Mon, 19 Oct 2020 06:34:49 +0000 Subject: arm64: dts: allwinner: Pine H64: Enable both RGMII RX/TX delay Since commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config"), the network is unusable on PineH64 model A. This is due to phy-mode incorrectly set to rgmii instead of rgmii-id. Fixes: 729e1ffcf47e ("arm64: allwinner: h6: add support for the Ethernet on Pine H64") Signed-off-by: Corentin Labbe Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20201019063449.33316-1-clabbe@baylibre.com --- arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts index af85b2074867..961732c52aa0 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts @@ -100,7 +100,7 @@ &emac { pinctrl-names = "default"; pinctrl-0 = <&ext_rgmii_pins>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-handle = <&ext_rgmii_phy>; phy-supply = <®_gmac_3v3>; allwinner,rx-delay-ps = <200>; -- cgit v1.2.3 From d7cdff444579e6659459b2fe04340ebb27628d5e Mon Sep 17 00:00:00 2001 From: Jernej Skrabec Date: Thu, 22 Oct 2020 20:58:39 +0200 Subject: arm64: dts: allwinner: a64: OrangePi Win: Fix ethernet node RX/TX delay on OrangePi Win board is set on PHY. Reflect that in ethernet node. Fixes: 93d6a27cfcc0 ("arm64: dts: allwinner: a64: Orange Pi Win: Add Ethernet node") Signed-off-by: Jernej Skrabec Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20201022185839.2779245-1-jernej.skrabec@siol.net --- arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts index d894ec5fa8a1..70e31743f0ba 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts @@ -120,7 +120,7 @@ &emac { pinctrl-names = "default"; pinctrl-0 = <&rgmii_pins>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-handle = <&ext_rgmii_phy>; phy-supply = <®_gmac_3v3>; status = "okay"; -- cgit v1.2.3 From 927f42fcc1b4f7d04a2ac5cf02f25612aa8923a4 Mon Sep 17 00:00:00 2001 From: Jernej Skrabec Date: Thu, 22 Oct 2020 23:13:01 +0200 Subject: arm64: dts: allwinner: a64: Pine64 Plus: Fix ethernet node According to board schematic, PHY provides both, RX and TX delays. However, according to "fix" Realtek provided for this board, only TX delay should be provided by PHY. Tests show that both variants work but TX only PHY delay works slightly better. Update ethernet node to reflect the fact that PHY provides TX delay. Fixes: 94f442886711 ("arm64: dts: allwinner: A64: Restore EMAC changes") Signed-off-by: Jernej Skrabec Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20201022211301.3548422-1-jernej.skrabec@siol.net --- arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts index b26181cf9095..b54099b654c8 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts @@ -13,7 +13,7 @@ &emac { pinctrl-names = "default"; pinctrl-0 = <&rgmii_pins>; - phy-mode = "rgmii"; + phy-mode = "rgmii-txid"; phy-handle = <&ext_rgmii_phy>; status = "okay"; }; -- cgit v1.2.3 From b34bf9f6a623ddb82600a5ed5c644224122395e1 Mon Sep 17 00:00:00 2001 From: Jernej Skrabec Date: Fri, 23 Oct 2020 20:48:58 +0200 Subject: arm64: dts: allwinner: h5: OrangePi PC2: Fix ethernet node RX and TX delay are provided by ethernet PHY. Reflect that in ethernet node. Fixes: 44a94c7ef989 ("arm64: dts: allwinner: H5: Restore EMAC changes") Signed-off-by: Jernej Skrabec Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20201023184858.3272918-1-jernej.skrabec@siol.net --- arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts index 7d7aad18f078..8bf2db9dcbda 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts @@ -123,7 +123,7 @@ pinctrl-0 = <&emac_rgmii_pins>; phy-supply = <®_gmac_3v3>; phy-handle = <&ext_rgmii_phy>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; status = "okay"; }; -- cgit v1.2.3 From b3eec3212e66ece33f69be0de98d54e67834e798 Mon Sep 17 00:00:00 2001 From: Jernej Skrabec Date: Sun, 25 Oct 2020 09:19:49 +0100 Subject: ARM: dts: sun8i: r40: bananapi-m2-ultra: Fix ethernet node Ethernet PHY on BananaPi M2 Ultra provides RX and TX delays. Fix ethernet node to reflect that fact. Fixes: c36fd5a48bd2 ("ARM: dts: sun8i: r40: bananapi-m2-ultra: Enable GMAC ethernet controller") Signed-off-by: Jernej Skrabec Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20201025081949.783443-1-jernej.skrabec@siol.net --- arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts index 2fc62ef0cb3e..a6a1087a0c9b 100644 --- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts +++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts @@ -129,7 +129,7 @@ pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; phy-handle = <&phy1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-supply = <®_dc1sw>; status = "okay"; }; -- cgit v1.2.3 From 8d80e2f00a42ef10b54e1b2d9e97314f8fd046c0 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Sun, 25 Oct 2020 00:25:06 +0800 Subject: Revert "arm: sun8i: orangepi-pc-plus: Set EMAC activity LEDs to active high" This reverts commit 75ee680cbd2e4d0156b94f9fec50076361ab12f2. Turns out the activity and link LEDs on the RJ45 port are active low, just like on the Orange Pi PC. Revert the commit that says otherwise. Fixes: 75ee680cbd2e ("arm: sun8i: orangepi-pc-plus: Set EMAC activity LEDs to active high") Fixes: 4904337fe34f ("ARM: dts: sunxi: Restore EMAC changes (boards)") Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard Tested-by: Jernej Skrabec Acked-by: Jernej Skrabec Link: https://lore.kernel.org/r/20201024162515.30032-1-wens@kernel.org --- arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts | 5 ----- 1 file changed, 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts index 71fb73208939..babf4cf1b2f6 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts @@ -53,11 +53,6 @@ }; }; -&emac { - /* LEDs changed to active high on the plus */ - /delete-property/ allwinner,leds-active-low; -}; - &mmc1 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; -- cgit v1.2.3 From e76724153f5b4539802cc21b2c6131058668a1c6 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Sun, 25 Oct 2020 00:25:07 +0800 Subject: ARM: dts: sun6i: a31-hummingbird: Enable RGMII RX/TX delay on Ethernet PHY The Ethernet PHY on the A31 Hummingbird has the RX and TX delays enabled on the PHY, using pull-ups on the RXDLY and TXDLY pins. Fix the phy-mode description to correct reflect this so that the implementation doesn't reconfigure the delays incorrectly. This happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config"). Fixes: c220aec2bb79 ("ARM: dts: sun6i: Add Merrii A31 Hummingbird support") Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard Acked-by: Jernej Skrabec Link: https://lore.kernel.org/r/20201024162515.30032-2-wens@kernel.org --- arch/arm/boot/dts/sun6i-a31-hummingbird.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts index 049e6ab3cf56..73de34ae37fd 100644 --- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts +++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts @@ -154,7 +154,7 @@ pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; phy-handle = <&phy1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; status = "okay"; }; -- cgit v1.2.3 From 353c3de1303fc93032164402c0eb8550ecd6f154 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Sun, 25 Oct 2020 00:25:08 +0800 Subject: ARM: dts: sun7i: cubietruck: Enable RGMII RX/TX delay on Ethernet PHY MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The Ethernet PHY on the Cubietruck has the RX and TX delays enabled on the PHY, using pull-ups on the RXDLY and TXDLY pins. Fix the phy-mode description to correct reflect this so that the implementation doesn't reconfigure the delays incorrectly. This happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config"). Fixes: 67073d97672d ("ARM: dts: sun7i: cubietruck: Enable the GMAC") Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard Tested-by: Emilio López Reviewed-by: Emilio López Link: https://lore.kernel.org/r/20201024162515.30032-3-wens@kernel.org --- arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts index 8c8dee6ea461..9109ca0919ad 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts @@ -151,7 +151,7 @@ pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; phy-handle = <&phy1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; status = "okay"; }; -- cgit v1.2.3 From f94f78bd93f567c022f594589dbeecdf59931365 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Sun, 25 Oct 2020 00:25:09 +0800 Subject: ARM: dts: sun7i: bananapi-m1-plus: Enable RGMII RX/TX delay on Ethernet PHY The Ethernet PHY on the Bananapi M1+ has the RX and TX delays enabled on the PHY, using pull-ups on the RXDLY and TXDLY pins. Fix the phy-mode description to correct reflect this so that the implementation doesn't reconfigure the delays incorrectly. This happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config"). Fixes: 04c85ecad32a ("ARM: dts: sun7i: Add dts file for Bananapi M1 Plus board") Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard Acked-by: Jernej Skrabec Link: https://lore.kernel.org/r/20201024162515.30032-4-wens@kernel.org --- arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts index 32d5d45a35c0..8945dbb114a2 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts @@ -130,7 +130,7 @@ pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; phy-handle = <&phy1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-supply = <®_gmac_3v3>; status = "okay"; }; -- cgit v1.2.3 From e080ab31a0aa126b0a7e4f67f2b01b371b852c88 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Sun, 25 Oct 2020 00:25:10 +0800 Subject: ARM: dts: sun8i: h3: orangepi-plus2e: Enable RGMII RX/TX delay on Ethernet PHY The Ethernet PHY on the Orange Pi Plus 2E has the RX and TX delays enabled on the PHY, using pull-ups on the RXDLY and TXDLY pins. Fix the phy-mode description to correct reflect this so that the implementation doesn't reconfigure the delays incorrectly. This happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config"). Fixes: 4904337fe34f ("ARM: dts: sunxi: Restore EMAC changes (boards)") Fixes: 7a78ef92cdc5 ("ARM: sun8i: h3: Enable EMAC with external PHY on Orange Pi Plus 2E") Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard Tested-by: Jernej Skrabec Acked-by: Jernej Skrabec Link: https://lore.kernel.org/r/20201024162515.30032-5-wens@kernel.org --- arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts index 6dbf7b2e0c13..b6ca45d18e51 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts @@ -67,7 +67,7 @@ pinctrl-0 = <&emac_rgmii_pins>; phy-supply = <®_gmac_3v3>; phy-handle = <&ext_rgmii_phy>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; status = "okay"; }; -- cgit v1.2.3 From 57dbe558457bf4042169bc1f334e3b53a8480a1c Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Sun, 25 Oct 2020 00:25:11 +0800 Subject: ARM: dts: sun8i: a83t: Enable both RGMII RX/TX delay on Ethernet PHY The Ethernet PHY on the Bananapi M3 and Cubietruck Plus have the RX and TX delays enabled on the PHY, using pull-ups on the RXDLY and TXDLY pins. Fix the phy-mode description to correct reflect this so that the implementation doesn't reconfigure the delays incorrectly. This happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config"). Fixes: 039359948a4b ("ARM: dts: sun8i: a83t: Enable Ethernet on two boards") Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard Acked-by: Jernej Skrabec Link: https://lore.kernel.org/r/20201024162515.30032-6-wens@kernel.org --- arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts | 2 +- arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts index 9d34eabba121..431f70234d36 100644 --- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts +++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts @@ -131,7 +131,7 @@ pinctrl-0 = <&emac_rgmii_pins>; phy-supply = <®_sw>; phy-handle = <&rgmii_phy>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; allwinner,rx-delay-ps = <700>; allwinner,tx-delay-ps = <700>; status = "okay"; diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts index d9be511f054f..d8326a5c681d 100644 --- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts +++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts @@ -183,7 +183,7 @@ pinctrl-0 = <&emac_rgmii_pins>; phy-supply = <®_dldo4>; phy-handle = <&rgmii_phy>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; status = "okay"; }; -- cgit v1.2.3 From b1064037e8ecf09d587b7b4966eebe0c362908e5 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Sun, 25 Oct 2020 00:25:12 +0800 Subject: ARM: dts: sun9i: Enable both RGMII RX/TX delay on Ethernet PHY The Ethernet PHY on the Cubieboard 4 and A80 Optimus have the RX and TX delays enabled on the PHY, using pull-ups on the RXDLY and TXDLY pins. Fix the phy-mode description to correct reflect this so that the implementation doesn't reconfigure the delays incorrectly. This happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config"). Fixes: 98048143b7f8 ("ARM: dts: sun9i: cubieboard4: Enable GMAC") Fixes: bc9bd03a44f9 ("ARM: dts: sun9i: a80-optimus: Enable GMAC") Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard Acked-by: Jernej Skrabec Link: https://lore.kernel.org/r/20201024162515.30032-7-wens@kernel.org --- arch/arm/boot/dts/sun9i-a80-cubieboard4.dts | 2 +- arch/arm/boot/dts/sun9i-a80-optimus.dts | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts index d3b337b043a1..484b93df20cb 100644 --- a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts +++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts @@ -129,7 +129,7 @@ pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; phy-handle = <&phy1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-supply = <®_cldo1>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts index bbc6335e5631..5c3580d712e4 100644 --- a/arch/arm/boot/dts/sun9i-a80-optimus.dts +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts @@ -124,7 +124,7 @@ pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; phy-handle = <&phy1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-supply = <®_cldo1>; status = "okay"; }; -- cgit v1.2.3 From 3914160ffc0bf762d6d605d4b27036b7b89367ea Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Sun, 25 Oct 2020 00:25:13 +0800 Subject: ARM: dts: sunxi: bananapi-m2-plus: Enable RGMII RX/TX delay on Ethernet PHY The Ethernet PHY on the Bananapi M2+ has the RX and TX delays enabled on the PHY, using pull-ups on the RXDLY and TXDLY pins. Fix the phy-mode description to correct reflect this so that the implementation doesn't reconfigure the delays incorrectly. This happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config"). Fixes: 8c7ba536e709 ("ARM: sun8i: bananapi-m2-plus: Enable dwmac-sun8i") Fixes: 4904337fe34f ("ARM: dts: sunxi: Restore EMAC changes (boards)") Fixes: aa8fee415f46 ("ARM: dts: sun8i: h3: Split out non-SoC-specific parts of Bananapi M2 Plus") Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard Tested-by: Jernej Skrabec Acked-by: Jernej Skrabec Link: https://lore.kernel.org/r/20201024162515.30032-8-wens@kernel.org --- arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi b/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi index 39263e74fbb5..8e5cb3b3fd68 100644 --- a/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi +++ b/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi @@ -126,7 +126,7 @@ pinctrl-0 = <&emac_rgmii_pins>; phy-supply = <®_gmac_3v3>; phy-handle = <&ext_rgmii_phy>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; status = "okay"; }; -- cgit v1.2.3 From 2bd8570d20c88909b8be3251727a26476b02652c Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Sun, 25 Oct 2020 00:25:14 +0800 Subject: arm64: dts: allwinner: h5: libretech-all-h5-cc: Enable RGMII RX/TX delay on PHY The Ethernet PHY on the Libre Computer ALL-H5-CC has the RX and TX delays enabled on the PHY, using pull-ups on the RXDLY and TXDLY pins. Fix the phy-mode description to correct reflect this so that the implementation doesn't reconfigure the delays incorrectly. This happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config"). Fixes: 60d0426d7603 ("arm64: dts: allwinner: h5: Add Libre Computer ALL-H5-CC H5 board") Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard Acked-by: Jernej Skrabec Link: https://lore.kernel.org/r/20201024162515.30032-9-wens@kernel.org --- arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h5-cc.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h5-cc.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h5-cc.dts index df1b9263ad0e..6e30a564c87f 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h5-cc.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h5-cc.dts @@ -36,7 +36,7 @@ pinctrl-0 = <&emac_rgmii_pins>; phy-supply = <®_gmac_3v3>; phy-handle = <&ext_rgmii_phy>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; /delete-property/ allwinner,leds-active-low; status = "okay"; }; -- cgit v1.2.3 From 1a9a8910b2153cd3c4f3f2f8defcb853ead3b1fd Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Sun, 25 Oct 2020 00:25:15 +0800 Subject: arm64: dts: allwinner: a64: bananapi-m64: Enable RGMII RX/TX delay on PHY The Ethernet PHY on the Bananapi M64 has the RX and TX delays enabled on the PHY, using pull-ups on the RXDLY and TXDLY pins. Fix the phy-mode description to correct reflect this so that the implementation doesn't reconfigure the delays incorrectly. This happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config"). Fixes: e7295499903d ("arm64: allwinner: bananapi-m64: Enable dwmac-sun8i") Fixes: 94f442886711 ("arm64: dts: allwinner: A64: Restore EMAC changes") Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard Tested-by: Corentin Labbe Acked-by: Jernej Skrabec Link: https://lore.kernel.org/r/20201024162515.30032-10-wens@kernel.org --- arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts index 3ea5182ca489..e5e840b9fbb4 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts @@ -105,7 +105,7 @@ &emac { pinctrl-names = "default"; pinctrl-0 = <&rgmii_pins>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-handle = <&ext_rgmii_phy>; phy-supply = <®_dc1sw>; status = "okay"; -- cgit v1.2.3 From 107954afc5df667da438644aa4982606663f9b17 Mon Sep 17 00:00:00 2001 From: Nenad Peric Date: Wed, 28 Oct 2020 12:58:17 +0100 Subject: arm64: dts: allwinner: h5: OrangePi Prime: Fix ethernet node RX and TX delay are provided by ethernet PHY. Reflect that in ethernet node. Fixes: 44a94c7ef989 ("arm64: dts: allwinner: H5: Restore EMAC changes") Signed-off-by: Nenad Peric Signed-off-by: Maxime Ripard Acked-by: Jernej Skrabec Link: https://lore.kernel.org/r/20201028115817.68113-1-nperic@gmail.com --- arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts index cb44bfa5981f..33ab44072e6d 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts @@ -124,7 +124,7 @@ pinctrl-0 = <&emac_rgmii_pins>; phy-supply = <®_gmac_3v3>; phy-handle = <&ext_rgmii_phy>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; status = "okay"; }; -- cgit v1.2.3