From c6b5774caafa4c12b6019366e2fdaaff117e95a4 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Wed, 24 Jun 2009 09:44:06 +0800 Subject: ACPICA: Add 64-bit support to acpi_read and acpi_write Needed by drivers for new ACPi tables. Internal versions of these functions still use 32-bit max transfers, in order to minimize disruption and stack use for the standard ACPI registers (FADT-based). Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown --- drivers/acpi/acpica/achware.h | 8 ++ drivers/acpi/acpica/evgpe.c | 8 +- drivers/acpi/acpica/evgpeblk.c | 4 +- drivers/acpi/acpica/hwgpe.c | 34 +++---- drivers/acpi/acpica/hwregs.c | 206 ++++++++++++++++++++++++++++++++++++++--- drivers/acpi/acpica/hwtimer.c | 2 +- drivers/acpi/acpica/hwxface.c | 166 +++++++++++++++++++-------------- 7 files changed, 325 insertions(+), 103 deletions(-) (limited to 'drivers/acpi/acpica') diff --git a/drivers/acpi/acpica/achware.h b/drivers/acpi/acpica/achware.h index 4afa3d8e0efb..36192f142fbb 100644 --- a/drivers/acpi/acpica/achware.h +++ b/drivers/acpi/acpica/achware.h @@ -62,6 +62,14 @@ u32 acpi_hw_get_mode(void); /* * hwregs - ACPI Register I/O */ +acpi_status +acpi_hw_validate_register(struct acpi_generic_address *reg, + u8 max_bit_width, u64 *address); + +acpi_status acpi_hw_read(u32 *value, struct acpi_generic_address *reg); + +acpi_status acpi_hw_write(u32 value, struct acpi_generic_address *reg); + struct acpi_bit_register_info *acpi_hw_get_bit_register_info(u32 register_id); acpi_status acpi_hw_write_pm1_control(u32 pm1a_control, u32 pm1b_control); diff --git a/drivers/acpi/acpica/evgpe.c b/drivers/acpi/acpica/evgpe.c index b9d8ee69ca6c..afacf4416c73 100644 --- a/drivers/acpi/acpica/evgpe.c +++ b/drivers/acpi/acpica/evgpe.c @@ -424,8 +424,8 @@ u32 acpi_ev_gpe_detect(struct acpi_gpe_xrupt_info * gpe_xrupt_list) /* Read the Status Register */ status = - acpi_read(&status_reg, - &gpe_register_info->status_address); + acpi_hw_read(&status_reg, + &gpe_register_info->status_address); if (ACPI_FAILURE(status)) { goto unlock_and_exit; } @@ -433,8 +433,8 @@ u32 acpi_ev_gpe_detect(struct acpi_gpe_xrupt_info * gpe_xrupt_list) /* Read the Enable Register */ status = - acpi_read(&enable_reg, - &gpe_register_info->enable_address); + acpi_hw_read(&enable_reg, + &gpe_register_info->enable_address); if (ACPI_FAILURE(status)) { goto unlock_and_exit; } diff --git a/drivers/acpi/acpica/evgpeblk.c b/drivers/acpi/acpica/evgpeblk.c index 7b3463639422..a60aaa7635f3 100644 --- a/drivers/acpi/acpica/evgpeblk.c +++ b/drivers/acpi/acpica/evgpeblk.c @@ -843,14 +843,14 @@ acpi_ev_create_gpe_info_blocks(struct acpi_gpe_block_info *gpe_block) /* Disable all GPEs within this register */ - status = acpi_write(0x00, &this_register->enable_address); + status = acpi_hw_write(0x00, &this_register->enable_address); if (ACPI_FAILURE(status)) { goto error_exit; } /* Clear any pending GPE events within this register */ - status = acpi_write(0xFF, &this_register->status_address); + status = acpi_hw_write(0xFF, &this_register->status_address); if (ACPI_FAILURE(status)) { goto error_exit; } diff --git a/drivers/acpi/acpica/hwgpe.c b/drivers/acpi/acpica/hwgpe.c index d3b7e37c9eed..c28c41b3180b 100644 --- a/drivers/acpi/acpica/hwgpe.c +++ b/drivers/acpi/acpica/hwgpe.c @@ -82,7 +82,7 @@ acpi_status acpi_hw_low_disable_gpe(struct acpi_gpe_event_info *gpe_event_info) /* Get current value of the enable register that contains this GPE */ - status = acpi_read(&enable_mask, &gpe_register_info->enable_address); + status = acpi_hw_read(&enable_mask, &gpe_register_info->enable_address); if (ACPI_FAILURE(status)) { return (status); } @@ -95,7 +95,7 @@ acpi_status acpi_hw_low_disable_gpe(struct acpi_gpe_event_info *gpe_event_info) /* Write the updated enable mask */ - status = acpi_write(enable_mask, &gpe_register_info->enable_address); + status = acpi_hw_write(enable_mask, &gpe_register_info->enable_address); return (status); } @@ -130,8 +130,8 @@ acpi_hw_write_gpe_enable_reg(struct acpi_gpe_event_info * gpe_event_info) /* Write the entire GPE (runtime) enable register */ - status = acpi_write(gpe_register_info->enable_for_run, - &gpe_register_info->enable_address); + status = acpi_hw_write(gpe_register_info->enable_for_run, + &gpe_register_info->enable_address); return (status); } @@ -163,8 +163,8 @@ acpi_status acpi_hw_clear_gpe(struct acpi_gpe_event_info * gpe_event_info) * Write a one to the appropriate bit in the status register to * clear this GPE. */ - status = acpi_write(register_bit, - &gpe_event_info->register_info->status_address); + status = acpi_hw_write(register_bit, + &gpe_event_info->register_info->status_address); return (status); } @@ -222,7 +222,7 @@ acpi_hw_get_gpe_status(struct acpi_gpe_event_info * gpe_event_info, /* GPE currently active (status bit == 1)? */ - status = acpi_read(&in_byte, &gpe_register_info->status_address); + status = acpi_hw_read(&in_byte, &gpe_register_info->status_address); if (ACPI_FAILURE(status)) { goto unlock_and_exit; } @@ -266,8 +266,8 @@ acpi_hw_disable_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info, /* Disable all GPEs in this register */ status = - acpi_write(0x00, - &gpe_block->register_info[i].enable_address); + acpi_hw_write(0x00, + &gpe_block->register_info[i].enable_address); if (ACPI_FAILURE(status)) { return (status); } @@ -303,8 +303,8 @@ acpi_hw_clear_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info, /* Clear status on all GPEs in this register */ status = - acpi_write(0xFF, - &gpe_block->register_info[i].status_address); + acpi_hw_write(0xFF, + &gpe_block->register_info[i].status_address); if (ACPI_FAILURE(status)) { return (status); } @@ -345,9 +345,9 @@ acpi_hw_enable_runtime_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info, /* Enable all "runtime" GPEs in this register */ - status = acpi_write(gpe_block->register_info[i].enable_for_run, - &gpe_block->register_info[i]. - enable_address); + status = + acpi_hw_write(gpe_block->register_info[i].enable_for_run, + &gpe_block->register_info[i].enable_address); if (ACPI_FAILURE(status)) { return (status); } @@ -387,9 +387,9 @@ acpi_hw_enable_wakeup_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info, /* Enable all "wake" GPEs in this register */ - status = acpi_write(gpe_block->register_info[i].enable_for_wake, - &gpe_block->register_info[i]. - enable_address); + status = + acpi_hw_write(gpe_block->register_info[i].enable_for_wake, + &gpe_block->register_info[i].enable_address); if (ACPI_FAILURE(status)) { return (status); } diff --git a/drivers/acpi/acpica/hwregs.c b/drivers/acpi/acpica/hwregs.c index 23d5505cb1f7..15c9ed2be853 100644 --- a/drivers/acpi/acpica/hwregs.c +++ b/drivers/acpi/acpica/hwregs.c @@ -62,6 +62,184 @@ acpi_hw_write_multiple(u32 value, struct acpi_generic_address *register_a, struct acpi_generic_address *register_b); +/****************************************************************************** + * + * FUNCTION: acpi_hw_validate_register + * + * PARAMETERS: Reg - GAS register structure + * max_bit_width - Max bit_width supported (32 or 64) + * Address - Pointer to where the gas->address + * is returned + * + * RETURN: Status + * + * DESCRIPTION: Validate the contents of a GAS register. Checks the GAS + * pointer, Address, space_id, bit_width, and bit_offset. + * + ******************************************************************************/ + +acpi_status +acpi_hw_validate_register(struct acpi_generic_address *reg, + u8 max_bit_width, u64 *address) +{ + + /* Must have a valid pointer to a GAS structure */ + + if (!reg) { + return (AE_BAD_PARAMETER); + } + + /* + * Copy the target address. This handles possible alignment issues. + * Address must not be null. A null address also indicates an optional + * ACPI register that is not supported, so no error message. + */ + ACPI_MOVE_64_TO_64(address, ®->address); + if (!(*address)) { + return (AE_BAD_ADDRESS); + } + + /* Validate the space_iD */ + + if ((reg->space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY) && + (reg->space_id != ACPI_ADR_SPACE_SYSTEM_IO)) { + ACPI_ERROR((AE_INFO, + "Unsupported address space: 0x%X", reg->space_id)); + return (AE_SUPPORT); + } + + /* Validate the bit_width */ + + if ((reg->bit_width != 8) && + (reg->bit_width != 16) && + (reg->bit_width != 32) && (reg->bit_width != max_bit_width)) { + ACPI_ERROR((AE_INFO, + "Unsupported register bit width: 0x%X", + reg->bit_width)); + return (AE_SUPPORT); + } + + /* Validate the bit_offset. Just a warning for now. */ + + if (reg->bit_offset != 0) { + ACPI_WARNING((AE_INFO, + "Unsupported register bit offset: 0x%X", + reg->bit_offset)); + } + + return (AE_OK); +} + +/****************************************************************************** + * + * FUNCTION: acpi_hw_read + * + * PARAMETERS: Value - Where the value is returned + * Reg - GAS register structure + * + * RETURN: Status + * + * DESCRIPTION: Read from either memory or IO space. This is a 32-bit max + * version of acpi_read, used internally since the overhead of + * 64-bit values is not needed. + * + * LIMITATIONS: + * bit_width must be exactly 8, 16, or 32. + * space_iD must be system_memory or system_iO. + * bit_offset and access_width are currently ignored, as there has + * not been a need to implement these. + * + ******************************************************************************/ + +acpi_status acpi_hw_read(u32 *value, struct acpi_generic_address *reg) +{ + u64 address; + acpi_status status; + + ACPI_FUNCTION_NAME(hw_read); + + /* Validate contents of the GAS register */ + + status = acpi_hw_validate_register(reg, 32, &address); + if (ACPI_FAILURE(status)) { + return (status); + } + + /* Initialize entire 32-bit return value to zero */ + + *value = 0; + + /* + * Two address spaces supported: Memory or IO. PCI_Config is + * not supported here because the GAS structure is insufficient + */ + if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) { + status = acpi_os_read_memory((acpi_physical_address) + address, value, reg->bit_width); + } else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */ + + status = acpi_hw_read_port((acpi_io_address) + address, value, reg->bit_width); + } + + ACPI_DEBUG_PRINT((ACPI_DB_IO, + "Read: %8.8X width %2d from %8.8X%8.8X (%s)\n", + *value, reg->bit_width, ACPI_FORMAT_UINT64(address), + acpi_ut_get_region_name(reg->space_id))); + + return (status); +} + +/****************************************************************************** + * + * FUNCTION: acpi_hw_write + * + * PARAMETERS: Value - Value to be written + * Reg - GAS register structure + * + * RETURN: Status + * + * DESCRIPTION: Write to either memory or IO space. This is a 32-bit max + * version of acpi_write, used internally since the overhead of + * 64-bit values is not needed. + * + ******************************************************************************/ + +acpi_status acpi_hw_write(u32 value, struct acpi_generic_address *reg) +{ + u64 address; + acpi_status status; + + ACPI_FUNCTION_NAME(hw_write); + + /* Validate contents of the GAS register */ + + status = acpi_hw_validate_register(reg, 32, &address); + if (ACPI_FAILURE(status)) { + return (status); + } + + /* + * Two address spaces supported: Memory or IO. PCI_Config is + * not supported here because the GAS structure is insufficient + */ + if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) { + status = acpi_os_write_memory((acpi_physical_address) + address, value, reg->bit_width); + } else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */ + + status = acpi_hw_write_port((acpi_io_address) + address, value, reg->bit_width); + } + + ACPI_DEBUG_PRINT((ACPI_DB_IO, + "Wrote: %8.8X width %2d to %8.8X%8.8X (%s)\n", + value, reg->bit_width, ACPI_FORMAT_UINT64(address), + acpi_ut_get_region_name(reg->space_id))); + + return (status); +} + /******************************************************************************* * * FUNCTION: acpi_hw_clear_acpi_status @@ -152,15 +330,16 @@ acpi_status acpi_hw_write_pm1_control(u32 pm1a_control, u32 pm1b_control) ACPI_FUNCTION_TRACE(hw_write_pm1_control); - status = acpi_write(pm1a_control, &acpi_gbl_FADT.xpm1a_control_block); + status = + acpi_hw_write(pm1a_control, &acpi_gbl_FADT.xpm1a_control_block); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } if (acpi_gbl_FADT.xpm1b_control_block.address) { status = - acpi_write(pm1b_control, - &acpi_gbl_FADT.xpm1b_control_block); + acpi_hw_write(pm1b_control, + &acpi_gbl_FADT.xpm1b_control_block); } return_ACPI_STATUS(status); } @@ -218,12 +397,13 @@ acpi_hw_register_read(u32 register_id, u32 * return_value) case ACPI_REGISTER_PM2_CONTROL: /* 8-bit access */ - status = acpi_read(&value, &acpi_gbl_FADT.xpm2_control_block); + status = + acpi_hw_read(&value, &acpi_gbl_FADT.xpm2_control_block); break; case ACPI_REGISTER_PM_TIMER: /* 32-bit access */ - status = acpi_read(&value, &acpi_gbl_FADT.xpm_timer_block); + status = acpi_hw_read(&value, &acpi_gbl_FADT.xpm_timer_block); break; case ACPI_REGISTER_SMI_COMMAND_BLOCK: /* 8-bit access */ @@ -340,7 +520,8 @@ acpi_status acpi_hw_register_write(u32 register_id, u32 value) * as per the ACPI spec. */ status = - acpi_read(&read_value, &acpi_gbl_FADT.xpm2_control_block); + acpi_hw_read(&read_value, + &acpi_gbl_FADT.xpm2_control_block); if (ACPI_FAILURE(status)) { goto exit; } @@ -350,12 +531,13 @@ acpi_status acpi_hw_register_write(u32 register_id, u32 value) ACPI_INSERT_BITS(value, ACPI_PM2_CONTROL_PRESERVED_BITS, read_value); - status = acpi_write(value, &acpi_gbl_FADT.xpm2_control_block); + status = + acpi_hw_write(value, &acpi_gbl_FADT.xpm2_control_block); break; case ACPI_REGISTER_PM_TIMER: /* 32-bit access */ - status = acpi_write(value, &acpi_gbl_FADT.xpm_timer_block); + status = acpi_hw_write(value, &acpi_gbl_FADT.xpm_timer_block); break; case ACPI_REGISTER_SMI_COMMAND_BLOCK: /* 8-bit access */ @@ -401,7 +583,7 @@ acpi_hw_read_multiple(u32 *value, /* The first register is always required */ - status = acpi_read(&value_a, register_a); + status = acpi_hw_read(&value_a, register_a); if (ACPI_FAILURE(status)) { return (status); } @@ -409,7 +591,7 @@ acpi_hw_read_multiple(u32 *value, /* Second register is optional */ if (register_b->address) { - status = acpi_read(&value_b, register_b); + status = acpi_hw_read(&value_b, register_b); if (ACPI_FAILURE(status)) { return (status); } @@ -452,7 +634,7 @@ acpi_hw_write_multiple(u32 value, /* The first register is always required */ - status = acpi_write(value, register_a); + status = acpi_hw_write(value, register_a); if (ACPI_FAILURE(status)) { return (status); } @@ -470,7 +652,7 @@ acpi_hw_write_multiple(u32 value, * and writes have no side effects" */ if (register_b->address) { - status = acpi_write(value, register_b); + status = acpi_hw_write(value, register_b); } return (status); diff --git a/drivers/acpi/acpica/hwtimer.c b/drivers/acpi/acpica/hwtimer.c index b7f522c8f023..6b282e85d039 100644 --- a/drivers/acpi/acpica/hwtimer.c +++ b/drivers/acpi/acpica/hwtimer.c @@ -100,7 +100,7 @@ acpi_status acpi_get_timer(u32 * ticks) } status = - acpi_hw_low_level_read(32, ticks, &acpi_gbl_FADT.xpm_timer_block); + acpi_hw_read(ticks, &acpi_gbl_FADT.xpm_timer_block); return_ACPI_STATUS(status); } diff --git a/drivers/acpi/acpica/hwxface.c b/drivers/acpi/acpica/hwxface.c index 9829979f2bdd..4ead85f29215 100644 --- a/drivers/acpi/acpica/hwxface.c +++ b/drivers/acpi/acpica/hwxface.c @@ -80,7 +80,7 @@ acpi_status acpi_reset(void) /* Write the reset value to the reset register */ - status = acpi_write(acpi_gbl_FADT.reset_value, reset_reg); + status = acpi_hw_write(acpi_gbl_FADT.reset_value, reset_reg); return_ACPI_STATUS(status); } @@ -97,67 +97,92 @@ ACPI_EXPORT_SYMBOL(acpi_reset) * * DESCRIPTION: Read from either memory or IO space. * + * LIMITATIONS: + * bit_width must be exactly 8, 16, 32, or 64. + * space_iD must be system_memory or system_iO. + * bit_offset and access_width are currently ignored, as there has + * not been a need to implement these. + * ******************************************************************************/ -acpi_status acpi_read(u32 *value, struct acpi_generic_address *reg) +acpi_status acpi_read(u64 *return_value, struct acpi_generic_address *reg) { + u32 value; u32 width; u64 address; acpi_status status; ACPI_FUNCTION_NAME(acpi_read); - /* - * Must have a valid pointer to a GAS structure, and a non-zero address - * within. - */ - if (!reg) { + if (!return_value) { return (AE_BAD_PARAMETER); } - /* Get a local copy of the address. Handles possible alignment issues */ + /* Validate contents of the GAS register. Allow 64-bit transfers */ - ACPI_MOVE_64_TO_64(&address, ®->address); - if (!address) { - return (AE_BAD_ADDRESS); + status = acpi_hw_validate_register(reg, 64, &address); + if (ACPI_FAILURE(status)) { + return (status); } - /* Supported widths are 8/16/32 */ - width = reg->bit_width; - if ((width != 8) && (width != 16) && (width != 32)) { - return (AE_SUPPORT); + if (width == 64) { + width = 32; /* Break into two 32-bit transfers */ } - /* Initialize entire 32-bit return value to zero */ + /* Initialize entire 64-bit return value to zero */ - *value = 0; + *return_value = 0; + value = 0; /* * Two address spaces supported: Memory or IO. PCI_Config is * not supported here because the GAS structure is insufficient */ - switch (reg->space_id) { - case ACPI_ADR_SPACE_SYSTEM_MEMORY: + if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) { + status = acpi_os_read_memory((acpi_physical_address) + address, &value, width); + if (ACPI_FAILURE(status)) { + return (status); + } + *return_value = value; + + if (reg->bit_width == 64) { - status = acpi_os_read_memory((acpi_physical_address) address, - value, width); - break; + /* Read the top 32 bits */ - case ACPI_ADR_SPACE_SYSTEM_IO: + status = acpi_os_read_memory((acpi_physical_address) + (address + 4), &value, 32); + if (ACPI_FAILURE(status)) { + return (status); + } + *return_value |= ((u64)value << 32); + } + } else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */ - status = - acpi_hw_read_port((acpi_io_address) address, value, width); - break; + status = acpi_hw_read_port((acpi_io_address) + address, &value, width); + if (ACPI_FAILURE(status)) { + return (status); + } + *return_value = value; - default: - ACPI_ERROR((AE_INFO, - "Unsupported address space: %X", reg->space_id)); - return (AE_BAD_PARAMETER); + if (reg->bit_width == 64) { + + /* Read the top 32 bits */ + + status = acpi_hw_read_port((acpi_io_address) + (address + 4), &value, 32); + if (ACPI_FAILURE(status)) { + return (status); + } + *return_value |= ((u64)value << 32); + } } ACPI_DEBUG_PRINT((ACPI_DB_IO, - "Read: %8.8X width %2d from %8.8X%8.8X (%s)\n", - *value, width, ACPI_FORMAT_UINT64(address), + "Read: %8.8X%8.8X width %2d from %8.8X%8.8X (%s)\n", + ACPI_FORMAT_UINT64(*return_value), reg->bit_width, + ACPI_FORMAT_UINT64(address), acpi_ut_get_region_name(reg->space_id))); return (status); @@ -169,7 +194,7 @@ ACPI_EXPORT_SYMBOL(acpi_read) * * FUNCTION: acpi_write * - * PARAMETERS: Value - To be written + * PARAMETERS: Value - Value to be written * Reg - GAS register structure * * RETURN: Status @@ -177,7 +202,7 @@ ACPI_EXPORT_SYMBOL(acpi_read) * DESCRIPTION: Write to either memory or IO space. * ******************************************************************************/ -acpi_status acpi_write(u32 value, struct acpi_generic_address *reg) +acpi_status acpi_write(u64 value, struct acpi_generic_address *reg) { u32 width; u64 address; @@ -185,54 +210,61 @@ acpi_status acpi_write(u32 value, struct acpi_generic_address *reg) ACPI_FUNCTION_NAME(acpi_write); - /* - * Must have a valid pointer to a GAS structure, and a non-zero address - * within. - */ - if (!reg) { - return (AE_BAD_PARAMETER); - } + /* Validate contents of the GAS register. Allow 64-bit transfers */ - /* Get a local copy of the address. Handles possible alignment issues */ - - ACPI_MOVE_64_TO_64(&address, ®->address); - if (!address) { - return (AE_BAD_ADDRESS); + status = acpi_hw_validate_register(reg, 64, &address); + if (ACPI_FAILURE(status)) { + return (status); } - /* Supported widths are 8/16/32 */ - width = reg->bit_width; - if ((width != 8) && (width != 16) && (width != 32)) { - return (AE_SUPPORT); + if (width == 64) { + width = 32; /* Break into two 32-bit transfers */ } /* - * Two address spaces supported: Memory or IO. - * PCI_Config is not supported here because the GAS struct is insufficient + * Two address spaces supported: Memory or IO. PCI_Config is + * not supported here because the GAS structure is insufficient */ - switch (reg->space_id) { - case ACPI_ADR_SPACE_SYSTEM_MEMORY: - - status = acpi_os_write_memory((acpi_physical_address) address, - value, width); - break; + if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) { + status = acpi_os_write_memory((acpi_physical_address) + address, ACPI_LODWORD(value), + width); + if (ACPI_FAILURE(status)) { + return (status); + } - case ACPI_ADR_SPACE_SYSTEM_IO: + if (reg->bit_width == 64) { + status = acpi_os_write_memory((acpi_physical_address) + (address + 4), + ACPI_HIDWORD(value), 32); + if (ACPI_FAILURE(status)) { + return (status); + } + } + } else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */ - status = acpi_hw_write_port((acpi_io_address) address, value, + status = acpi_hw_write_port((acpi_io_address) + address, ACPI_LODWORD(value), width); - break; + if (ACPI_FAILURE(status)) { + return (status); + } - default: - ACPI_ERROR((AE_INFO, - "Unsupported address space: %X", reg->space_id)); - return (AE_BAD_PARAMETER); + if (reg->bit_width == 64) { + status = acpi_hw_write_port((acpi_io_address) + (address + 4), + ACPI_HIDWORD(value), 32); + if (ACPI_FAILURE(status)) { + return (status); + } + } } ACPI_DEBUG_PRINT((ACPI_DB_IO, - "Wrote: %8.8X width %2d to %8.8X%8.8X (%s)\n", - value, width, ACPI_FORMAT_UINT64(address), + "Wrote: %8.8X%8.8X width %2d to %8.8X%8.8X (%s)\n", + ACPI_FORMAT_UINT64(value), reg->bit_width, + ACPI_FORMAT_UINT64(address), acpi_ut_get_region_name(reg->space_id))); return (status); -- cgit v1.2.3