From eba68f829794a1c3eb7a78d53c652daa303580ed Mon Sep 17 00:00:00 2001 From: Yendapally Reddy Dhananjaya Reddy Date: Thu, 16 Jun 2016 09:53:32 -0400 Subject: ata: ahci_brcmstb: rename to support across Broadcom SoC's Rename the existing Broadcom STB ahci driver to common Broadcom SATA3 driver to share this across Broadcom SoCs. Signed-off-by: Yendapally Reddy Dhananjaya Reddy Acked-by: Florian Fainelli Signed-off-by: Tejun Heo --- drivers/ata/Kconfig | 6 +- drivers/ata/Makefile | 2 +- drivers/ata/ahci_brcm.c | 380 +++++++++++++++++++++++++++++++++++++++++++++ drivers/ata/ahci_brcmstb.c | 380 --------------------------------------------- 4 files changed, 384 insertions(+), 384 deletions(-) create mode 100644 drivers/ata/ahci_brcm.c delete mode 100644 drivers/ata/ahci_brcmstb.c (limited to 'drivers/ata') diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index e2dc4c045146..8fe06e6a9a0b 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -98,12 +98,12 @@ config SATA_AHCI_PLATFORM If unsure, say N. -config AHCI_BRCMSTB - tristate "Broadcom STB AHCI SATA support" +config AHCI_BRCM + tristate "Broadcom AHCI SATA support" depends on ARCH_BRCMSTB || BMIPS_GENERIC help This option enables support for the AHCI SATA3 controller found on - STB SoC's. + Broadcom SoC's. If unsure, say N. diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index 0b2afb7e5f35..a46e6b784bda 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -11,7 +11,7 @@ obj-$(CONFIG_SATA_INIC162X) += sata_inic162x.o obj-$(CONFIG_SATA_SIL24) += sata_sil24.o obj-$(CONFIG_SATA_DWC) += sata_dwc_460ex.o obj-$(CONFIG_SATA_HIGHBANK) += sata_highbank.o libahci.o -obj-$(CONFIG_AHCI_BRCMSTB) += ahci_brcmstb.o libahci.o libahci_platform.o +obj-$(CONFIG_AHCI_BRCM) += ahci_brcm.o libahci.o libahci_platform.o obj-$(CONFIG_AHCI_CEVA) += ahci_ceva.o libahci.o libahci_platform.o obj-$(CONFIG_AHCI_DA850) += ahci_da850.o libahci.o libahci_platform.o obj-$(CONFIG_AHCI_IMX) += ahci_imx.o libahci.o libahci_platform.o diff --git a/drivers/ata/ahci_brcm.c b/drivers/ata/ahci_brcm.c new file mode 100644 index 000000000000..e87bcec0fd7c --- /dev/null +++ b/drivers/ata/ahci_brcm.c @@ -0,0 +1,380 @@ +/* + * Broadcom SATA3 AHCI Controller Driver + * + * Copyright © 2009-2015 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "ahci.h" + +#define DRV_NAME "brcm-ahci" + +#define SATA_TOP_CTRL_VERSION 0x0 +#define SATA_TOP_CTRL_BUS_CTRL 0x4 + #define MMIO_ENDIAN_SHIFT 0 /* CPU->AHCI */ + #define DMADESC_ENDIAN_SHIFT 2 /* AHCI->DDR */ + #define DMADATA_ENDIAN_SHIFT 4 /* AHCI->DDR */ + #define PIODATA_ENDIAN_SHIFT 6 + #define ENDIAN_SWAP_NONE 0 + #define ENDIAN_SWAP_FULL 2 + #define OVERRIDE_HWINIT BIT(16) +#define SATA_TOP_CTRL_TP_CTRL 0x8 +#define SATA_TOP_CTRL_PHY_CTRL 0xc + #define SATA_TOP_CTRL_PHY_CTRL_1 0x0 + #define SATA_TOP_CTRL_1_PHY_DEFAULT_POWER_STATE BIT(14) + #define SATA_TOP_CTRL_PHY_CTRL_2 0x4 + #define SATA_TOP_CTRL_2_SW_RST_MDIOREG BIT(0) + #define SATA_TOP_CTRL_2_SW_RST_OOB BIT(1) + #define SATA_TOP_CTRL_2_SW_RST_RX BIT(2) + #define SATA_TOP_CTRL_2_SW_RST_TX BIT(3) + #define SATA_TOP_CTRL_2_PHY_GLOBAL_RESET BIT(14) + #define SATA_TOP_CTRL_PHY_OFFS 0x8 + #define SATA_TOP_MAX_PHYS 2 + +#define SATA_FIRST_PORT_CTRL 0x700 +#define SATA_NEXT_PORT_CTRL_OFFSET 0x80 +#define SATA_PORT_PCTRL6(reg_base) (reg_base + 0x18) + +/* On big-endian MIPS, buses are reversed to big endian, so switch them back */ +#if defined(CONFIG_MIPS) && defined(__BIG_ENDIAN) +#define DATA_ENDIAN 2 /* AHCI->DDR inbound accesses */ +#define MMIO_ENDIAN 2 /* CPU->AHCI outbound accesses */ +#else +#define DATA_ENDIAN 0 +#define MMIO_ENDIAN 0 +#endif + +#define BUS_CTRL_ENDIAN_CONF \ + ((DATA_ENDIAN << DMADATA_ENDIAN_SHIFT) | \ + (DATA_ENDIAN << DMADESC_ENDIAN_SHIFT) | \ + (MMIO_ENDIAN << MMIO_ENDIAN_SHIFT)) + +enum brcm_ahci_quirks { + BRCM_AHCI_QUIRK_NO_NCQ = BIT(0), + BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE = BIT(1), +}; + +struct brcm_ahci_priv { + struct device *dev; + void __iomem *top_ctrl; + u32 port_mask; + u32 quirks; +}; + +static const struct ata_port_info ahci_brcm_port_info = { + .flags = AHCI_FLAG_COMMON | ATA_FLAG_NO_DIPM, + .link_flags = ATA_LFLAG_NO_DB_DELAY, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_platform_ops, +}; + +static inline u32 brcm_sata_readreg(void __iomem *addr) +{ + /* + * MIPS endianness is configured by boot strap, which also reverses all + * bus endianness (i.e., big-endian CPU + big endian bus ==> native + * endian I/O). + * + * Other architectures (e.g., ARM) either do not support big endian, or + * else leave I/O in little endian mode. + */ + if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN)) + return __raw_readl(addr); + else + return readl_relaxed(addr); +} + +static inline void brcm_sata_writereg(u32 val, void __iomem *addr) +{ + /* See brcm_sata_readreg() comments */ + if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN)) + __raw_writel(val, addr); + else + writel_relaxed(val, addr); +} + +static void brcm_sata_alpm_init(struct ahci_host_priv *hpriv) +{ + struct brcm_ahci_priv *priv = hpriv->plat_data; + u32 bus_ctrl, port_ctrl, host_caps; + int i; + + /* Enable support for ALPM */ + bus_ctrl = brcm_sata_readreg(priv->top_ctrl + + SATA_TOP_CTRL_BUS_CTRL); + brcm_sata_writereg(bus_ctrl | OVERRIDE_HWINIT, + priv->top_ctrl + SATA_TOP_CTRL_BUS_CTRL); + host_caps = readl(hpriv->mmio + HOST_CAP); + writel(host_caps | HOST_CAP_ALPM, hpriv->mmio); + brcm_sata_writereg(bus_ctrl, priv->top_ctrl + SATA_TOP_CTRL_BUS_CTRL); + + /* + * Adjust timeout to allow PLL sufficient time to lock while waking + * up from slumber mode. + */ + for (i = 0, port_ctrl = SATA_FIRST_PORT_CTRL; + i < SATA_TOP_MAX_PHYS; + i++, port_ctrl += SATA_NEXT_PORT_CTRL_OFFSET) { + if (priv->port_mask & BIT(i)) + writel(0xff1003fc, + hpriv->mmio + SATA_PORT_PCTRL6(port_ctrl)); + } +} + +static void brcm_sata_phy_enable(struct brcm_ahci_priv *priv, int port) +{ + void __iomem *phyctrl = priv->top_ctrl + SATA_TOP_CTRL_PHY_CTRL + + (port * SATA_TOP_CTRL_PHY_OFFS); + void __iomem *p; + u32 reg; + + if (priv->quirks & BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE) + return; + + /* clear PHY_DEFAULT_POWER_STATE */ + p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_1; + reg = brcm_sata_readreg(p); + reg &= ~SATA_TOP_CTRL_1_PHY_DEFAULT_POWER_STATE; + brcm_sata_writereg(reg, p); + + /* reset the PHY digital logic */ + p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_2; + reg = brcm_sata_readreg(p); + reg &= ~(SATA_TOP_CTRL_2_SW_RST_MDIOREG | SATA_TOP_CTRL_2_SW_RST_OOB | + SATA_TOP_CTRL_2_SW_RST_RX); + reg |= SATA_TOP_CTRL_2_SW_RST_TX; + brcm_sata_writereg(reg, p); + reg = brcm_sata_readreg(p); + reg |= SATA_TOP_CTRL_2_PHY_GLOBAL_RESET; + brcm_sata_writereg(reg, p); + reg = brcm_sata_readreg(p); + reg &= ~SATA_TOP_CTRL_2_PHY_GLOBAL_RESET; + brcm_sata_writereg(reg, p); + (void)brcm_sata_readreg(p); +} + +static void brcm_sata_phy_disable(struct brcm_ahci_priv *priv, int port) +{ + void __iomem *phyctrl = priv->top_ctrl + SATA_TOP_CTRL_PHY_CTRL + + (port * SATA_TOP_CTRL_PHY_OFFS); + void __iomem *p; + u32 reg; + + if (priv->quirks & BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE) + return; + + /* power-off the PHY digital logic */ + p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_2; + reg = brcm_sata_readreg(p); + reg |= (SATA_TOP_CTRL_2_SW_RST_MDIOREG | SATA_TOP_CTRL_2_SW_RST_OOB | + SATA_TOP_CTRL_2_SW_RST_RX | SATA_TOP_CTRL_2_SW_RST_TX | + SATA_TOP_CTRL_2_PHY_GLOBAL_RESET); + brcm_sata_writereg(reg, p); + + /* set PHY_DEFAULT_POWER_STATE */ + p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_1; + reg = brcm_sata_readreg(p); + reg |= SATA_TOP_CTRL_1_PHY_DEFAULT_POWER_STATE; + brcm_sata_writereg(reg, p); +} + +static void brcm_sata_phys_enable(struct brcm_ahci_priv *priv) +{ + int i; + + for (i = 0; i < SATA_TOP_MAX_PHYS; i++) + if (priv->port_mask & BIT(i)) + brcm_sata_phy_enable(priv, i); +} + +static void brcm_sata_phys_disable(struct brcm_ahci_priv *priv) +{ + int i; + + for (i = 0; i < SATA_TOP_MAX_PHYS; i++) + if (priv->port_mask & BIT(i)) + brcm_sata_phy_disable(priv, i); +} + +static u32 brcm_ahci_get_portmask(struct platform_device *pdev, + struct brcm_ahci_priv *priv) +{ + void __iomem *ahci; + struct resource *res; + u32 impl; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ahci"); + ahci = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(ahci)) + return 0; + + impl = readl(ahci + HOST_PORTS_IMPL); + + if (fls(impl) > SATA_TOP_MAX_PHYS) + dev_warn(priv->dev, "warning: more ports than PHYs (%#x)\n", + impl); + else if (!impl) + dev_info(priv->dev, "no ports found\n"); + + devm_iounmap(&pdev->dev, ahci); + devm_release_mem_region(&pdev->dev, res->start, resource_size(res)); + + return impl; +} + +static void brcm_sata_init(struct brcm_ahci_priv *priv) +{ + /* Configure endianness */ + brcm_sata_writereg(BUS_CTRL_ENDIAN_CONF, + priv->top_ctrl + SATA_TOP_CTRL_BUS_CTRL); +} + +#ifdef CONFIG_PM_SLEEP +static int brcm_ahci_suspend(struct device *dev) +{ + struct ata_host *host = dev_get_drvdata(dev); + struct ahci_host_priv *hpriv = host->private_data; + struct brcm_ahci_priv *priv = hpriv->plat_data; + int ret; + + ret = ahci_platform_suspend(dev); + brcm_sata_phys_disable(priv); + return ret; +} + +static int brcm_ahci_resume(struct device *dev) +{ + struct ata_host *host = dev_get_drvdata(dev); + struct ahci_host_priv *hpriv = host->private_data; + struct brcm_ahci_priv *priv = hpriv->plat_data; + + brcm_sata_init(priv); + brcm_sata_phys_enable(priv); + brcm_sata_alpm_init(hpriv); + return ahci_platform_resume(dev); +} +#endif + +static struct scsi_host_template ahci_platform_sht = { + AHCI_SHT(DRV_NAME), +}; + +static int brcm_ahci_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct brcm_ahci_priv *priv; + struct ahci_host_priv *hpriv; + struct resource *res; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + priv->dev = dev; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "top-ctrl"); + priv->top_ctrl = devm_ioremap_resource(dev, res); + if (IS_ERR(priv->top_ctrl)) + return PTR_ERR(priv->top_ctrl); + + if (of_device_is_compatible(dev->of_node, "brcm,bcm7425-ahci")) { + priv->quirks |= BRCM_AHCI_QUIRK_NO_NCQ; + priv->quirks |= BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE; + } + + brcm_sata_init(priv); + + priv->port_mask = brcm_ahci_get_portmask(pdev, priv); + if (!priv->port_mask) + return -ENODEV; + + brcm_sata_phys_enable(priv); + + hpriv = ahci_platform_get_resources(pdev); + if (IS_ERR(hpriv)) + return PTR_ERR(hpriv); + hpriv->plat_data = priv; + hpriv->flags = AHCI_HFLAG_WAKE_BEFORE_STOP; + + brcm_sata_alpm_init(hpriv); + + ret = ahci_platform_enable_resources(hpriv); + if (ret) + return ret; + + if (priv->quirks & BRCM_AHCI_QUIRK_NO_NCQ) + hpriv->flags |= AHCI_HFLAG_NO_NCQ; + + ret = ahci_platform_init_host(pdev, hpriv, &ahci_brcm_port_info, + &ahci_platform_sht); + if (ret) + return ret; + + dev_info(dev, "Broadcom AHCI SATA3 registered\n"); + + return 0; +} + +static int brcm_ahci_remove(struct platform_device *pdev) +{ + struct ata_host *host = dev_get_drvdata(&pdev->dev); + struct ahci_host_priv *hpriv = host->private_data; + struct brcm_ahci_priv *priv = hpriv->plat_data; + int ret; + + ret = ata_platform_remove_one(pdev); + if (ret) + return ret; + + brcm_sata_phys_disable(priv); + + return 0; +} + +static const struct of_device_id ahci_of_match[] = { + {.compatible = "brcm,bcm7425-ahci"}, + {.compatible = "brcm,bcm7445-ahci"}, + {}, +}; +MODULE_DEVICE_TABLE(of, ahci_of_match); + +static SIMPLE_DEV_PM_OPS(ahci_brcm_pm_ops, brcm_ahci_suspend, brcm_ahci_resume); + +static struct platform_driver brcm_ahci_driver = { + .probe = brcm_ahci_probe, + .remove = brcm_ahci_remove, + .driver = { + .name = DRV_NAME, + .of_match_table = ahci_of_match, + .pm = &ahci_brcm_pm_ops, + }, +}; +module_platform_driver(brcm_ahci_driver); + +MODULE_DESCRIPTION("Broadcom SATA3 AHCI Controller Driver"); +MODULE_AUTHOR("Brian Norris"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:sata-brcmstb"); diff --git a/drivers/ata/ahci_brcmstb.c b/drivers/ata/ahci_brcmstb.c deleted file mode 100644 index e87bcec0fd7c..000000000000 --- a/drivers/ata/ahci_brcmstb.c +++ /dev/null @@ -1,380 +0,0 @@ -/* - * Broadcom SATA3 AHCI Controller Driver - * - * Copyright © 2009-2015 Broadcom Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "ahci.h" - -#define DRV_NAME "brcm-ahci" - -#define SATA_TOP_CTRL_VERSION 0x0 -#define SATA_TOP_CTRL_BUS_CTRL 0x4 - #define MMIO_ENDIAN_SHIFT 0 /* CPU->AHCI */ - #define DMADESC_ENDIAN_SHIFT 2 /* AHCI->DDR */ - #define DMADATA_ENDIAN_SHIFT 4 /* AHCI->DDR */ - #define PIODATA_ENDIAN_SHIFT 6 - #define ENDIAN_SWAP_NONE 0 - #define ENDIAN_SWAP_FULL 2 - #define OVERRIDE_HWINIT BIT(16) -#define SATA_TOP_CTRL_TP_CTRL 0x8 -#define SATA_TOP_CTRL_PHY_CTRL 0xc - #define SATA_TOP_CTRL_PHY_CTRL_1 0x0 - #define SATA_TOP_CTRL_1_PHY_DEFAULT_POWER_STATE BIT(14) - #define SATA_TOP_CTRL_PHY_CTRL_2 0x4 - #define SATA_TOP_CTRL_2_SW_RST_MDIOREG BIT(0) - #define SATA_TOP_CTRL_2_SW_RST_OOB BIT(1) - #define SATA_TOP_CTRL_2_SW_RST_RX BIT(2) - #define SATA_TOP_CTRL_2_SW_RST_TX BIT(3) - #define SATA_TOP_CTRL_2_PHY_GLOBAL_RESET BIT(14) - #define SATA_TOP_CTRL_PHY_OFFS 0x8 - #define SATA_TOP_MAX_PHYS 2 - -#define SATA_FIRST_PORT_CTRL 0x700 -#define SATA_NEXT_PORT_CTRL_OFFSET 0x80 -#define SATA_PORT_PCTRL6(reg_base) (reg_base + 0x18) - -/* On big-endian MIPS, buses are reversed to big endian, so switch them back */ -#if defined(CONFIG_MIPS) && defined(__BIG_ENDIAN) -#define DATA_ENDIAN 2 /* AHCI->DDR inbound accesses */ -#define MMIO_ENDIAN 2 /* CPU->AHCI outbound accesses */ -#else -#define DATA_ENDIAN 0 -#define MMIO_ENDIAN 0 -#endif - -#define BUS_CTRL_ENDIAN_CONF \ - ((DATA_ENDIAN << DMADATA_ENDIAN_SHIFT) | \ - (DATA_ENDIAN << DMADESC_ENDIAN_SHIFT) | \ - (MMIO_ENDIAN << MMIO_ENDIAN_SHIFT)) - -enum brcm_ahci_quirks { - BRCM_AHCI_QUIRK_NO_NCQ = BIT(0), - BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE = BIT(1), -}; - -struct brcm_ahci_priv { - struct device *dev; - void __iomem *top_ctrl; - u32 port_mask; - u32 quirks; -}; - -static const struct ata_port_info ahci_brcm_port_info = { - .flags = AHCI_FLAG_COMMON | ATA_FLAG_NO_DIPM, - .link_flags = ATA_LFLAG_NO_DB_DELAY, - .pio_mask = ATA_PIO4, - .udma_mask = ATA_UDMA6, - .port_ops = &ahci_platform_ops, -}; - -static inline u32 brcm_sata_readreg(void __iomem *addr) -{ - /* - * MIPS endianness is configured by boot strap, which also reverses all - * bus endianness (i.e., big-endian CPU + big endian bus ==> native - * endian I/O). - * - * Other architectures (e.g., ARM) either do not support big endian, or - * else leave I/O in little endian mode. - */ - if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN)) - return __raw_readl(addr); - else - return readl_relaxed(addr); -} - -static inline void brcm_sata_writereg(u32 val, void __iomem *addr) -{ - /* See brcm_sata_readreg() comments */ - if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN)) - __raw_writel(val, addr); - else - writel_relaxed(val, addr); -} - -static void brcm_sata_alpm_init(struct ahci_host_priv *hpriv) -{ - struct brcm_ahci_priv *priv = hpriv->plat_data; - u32 bus_ctrl, port_ctrl, host_caps; - int i; - - /* Enable support for ALPM */ - bus_ctrl = brcm_sata_readreg(priv->top_ctrl + - SATA_TOP_CTRL_BUS_CTRL); - brcm_sata_writereg(bus_ctrl | OVERRIDE_HWINIT, - priv->top_ctrl + SATA_TOP_CTRL_BUS_CTRL); - host_caps = readl(hpriv->mmio + HOST_CAP); - writel(host_caps | HOST_CAP_ALPM, hpriv->mmio); - brcm_sata_writereg(bus_ctrl, priv->top_ctrl + SATA_TOP_CTRL_BUS_CTRL); - - /* - * Adjust timeout to allow PLL sufficient time to lock while waking - * up from slumber mode. - */ - for (i = 0, port_ctrl = SATA_FIRST_PORT_CTRL; - i < SATA_TOP_MAX_PHYS; - i++, port_ctrl += SATA_NEXT_PORT_CTRL_OFFSET) { - if (priv->port_mask & BIT(i)) - writel(0xff1003fc, - hpriv->mmio + SATA_PORT_PCTRL6(port_ctrl)); - } -} - -static void brcm_sata_phy_enable(struct brcm_ahci_priv *priv, int port) -{ - void __iomem *phyctrl = priv->top_ctrl + SATA_TOP_CTRL_PHY_CTRL + - (port * SATA_TOP_CTRL_PHY_OFFS); - void __iomem *p; - u32 reg; - - if (priv->quirks & BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE) - return; - - /* clear PHY_DEFAULT_POWER_STATE */ - p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_1; - reg = brcm_sata_readreg(p); - reg &= ~SATA_TOP_CTRL_1_PHY_DEFAULT_POWER_STATE; - brcm_sata_writereg(reg, p); - - /* reset the PHY digital logic */ - p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_2; - reg = brcm_sata_readreg(p); - reg &= ~(SATA_TOP_CTRL_2_SW_RST_MDIOREG | SATA_TOP_CTRL_2_SW_RST_OOB | - SATA_TOP_CTRL_2_SW_RST_RX); - reg |= SATA_TOP_CTRL_2_SW_RST_TX; - brcm_sata_writereg(reg, p); - reg = brcm_sata_readreg(p); - reg |= SATA_TOP_CTRL_2_PHY_GLOBAL_RESET; - brcm_sata_writereg(reg, p); - reg = brcm_sata_readreg(p); - reg &= ~SATA_TOP_CTRL_2_PHY_GLOBAL_RESET; - brcm_sata_writereg(reg, p); - (void)brcm_sata_readreg(p); -} - -static void brcm_sata_phy_disable(struct brcm_ahci_priv *priv, int port) -{ - void __iomem *phyctrl = priv->top_ctrl + SATA_TOP_CTRL_PHY_CTRL + - (port * SATA_TOP_CTRL_PHY_OFFS); - void __iomem *p; - u32 reg; - - if (priv->quirks & BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE) - return; - - /* power-off the PHY digital logic */ - p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_2; - reg = brcm_sata_readreg(p); - reg |= (SATA_TOP_CTRL_2_SW_RST_MDIOREG | SATA_TOP_CTRL_2_SW_RST_OOB | - SATA_TOP_CTRL_2_SW_RST_RX | SATA_TOP_CTRL_2_SW_RST_TX | - SATA_TOP_CTRL_2_PHY_GLOBAL_RESET); - brcm_sata_writereg(reg, p); - - /* set PHY_DEFAULT_POWER_STATE */ - p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_1; - reg = brcm_sata_readreg(p); - reg |= SATA_TOP_CTRL_1_PHY_DEFAULT_POWER_STATE; - brcm_sata_writereg(reg, p); -} - -static void brcm_sata_phys_enable(struct brcm_ahci_priv *priv) -{ - int i; - - for (i = 0; i < SATA_TOP_MAX_PHYS; i++) - if (priv->port_mask & BIT(i)) - brcm_sata_phy_enable(priv, i); -} - -static void brcm_sata_phys_disable(struct brcm_ahci_priv *priv) -{ - int i; - - for (i = 0; i < SATA_TOP_MAX_PHYS; i++) - if (priv->port_mask & BIT(i)) - brcm_sata_phy_disable(priv, i); -} - -static u32 brcm_ahci_get_portmask(struct platform_device *pdev, - struct brcm_ahci_priv *priv) -{ - void __iomem *ahci; - struct resource *res; - u32 impl; - - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ahci"); - ahci = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(ahci)) - return 0; - - impl = readl(ahci + HOST_PORTS_IMPL); - - if (fls(impl) > SATA_TOP_MAX_PHYS) - dev_warn(priv->dev, "warning: more ports than PHYs (%#x)\n", - impl); - else if (!impl) - dev_info(priv->dev, "no ports found\n"); - - devm_iounmap(&pdev->dev, ahci); - devm_release_mem_region(&pdev->dev, res->start, resource_size(res)); - - return impl; -} - -static void brcm_sata_init(struct brcm_ahci_priv *priv) -{ - /* Configure endianness */ - brcm_sata_writereg(BUS_CTRL_ENDIAN_CONF, - priv->top_ctrl + SATA_TOP_CTRL_BUS_CTRL); -} - -#ifdef CONFIG_PM_SLEEP -static int brcm_ahci_suspend(struct device *dev) -{ - struct ata_host *host = dev_get_drvdata(dev); - struct ahci_host_priv *hpriv = host->private_data; - struct brcm_ahci_priv *priv = hpriv->plat_data; - int ret; - - ret = ahci_platform_suspend(dev); - brcm_sata_phys_disable(priv); - return ret; -} - -static int brcm_ahci_resume(struct device *dev) -{ - struct ata_host *host = dev_get_drvdata(dev); - struct ahci_host_priv *hpriv = host->private_data; - struct brcm_ahci_priv *priv = hpriv->plat_data; - - brcm_sata_init(priv); - brcm_sata_phys_enable(priv); - brcm_sata_alpm_init(hpriv); - return ahci_platform_resume(dev); -} -#endif - -static struct scsi_host_template ahci_platform_sht = { - AHCI_SHT(DRV_NAME), -}; - -static int brcm_ahci_probe(struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - struct brcm_ahci_priv *priv; - struct ahci_host_priv *hpriv; - struct resource *res; - int ret; - - priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); - if (!priv) - return -ENOMEM; - priv->dev = dev; - - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "top-ctrl"); - priv->top_ctrl = devm_ioremap_resource(dev, res); - if (IS_ERR(priv->top_ctrl)) - return PTR_ERR(priv->top_ctrl); - - if (of_device_is_compatible(dev->of_node, "brcm,bcm7425-ahci")) { - priv->quirks |= BRCM_AHCI_QUIRK_NO_NCQ; - priv->quirks |= BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE; - } - - brcm_sata_init(priv); - - priv->port_mask = brcm_ahci_get_portmask(pdev, priv); - if (!priv->port_mask) - return -ENODEV; - - brcm_sata_phys_enable(priv); - - hpriv = ahci_platform_get_resources(pdev); - if (IS_ERR(hpriv)) - return PTR_ERR(hpriv); - hpriv->plat_data = priv; - hpriv->flags = AHCI_HFLAG_WAKE_BEFORE_STOP; - - brcm_sata_alpm_init(hpriv); - - ret = ahci_platform_enable_resources(hpriv); - if (ret) - return ret; - - if (priv->quirks & BRCM_AHCI_QUIRK_NO_NCQ) - hpriv->flags |= AHCI_HFLAG_NO_NCQ; - - ret = ahci_platform_init_host(pdev, hpriv, &ahci_brcm_port_info, - &ahci_platform_sht); - if (ret) - return ret; - - dev_info(dev, "Broadcom AHCI SATA3 registered\n"); - - return 0; -} - -static int brcm_ahci_remove(struct platform_device *pdev) -{ - struct ata_host *host = dev_get_drvdata(&pdev->dev); - struct ahci_host_priv *hpriv = host->private_data; - struct brcm_ahci_priv *priv = hpriv->plat_data; - int ret; - - ret = ata_platform_remove_one(pdev); - if (ret) - return ret; - - brcm_sata_phys_disable(priv); - - return 0; -} - -static const struct of_device_id ahci_of_match[] = { - {.compatible = "brcm,bcm7425-ahci"}, - {.compatible = "brcm,bcm7445-ahci"}, - {}, -}; -MODULE_DEVICE_TABLE(of, ahci_of_match); - -static SIMPLE_DEV_PM_OPS(ahci_brcm_pm_ops, brcm_ahci_suspend, brcm_ahci_resume); - -static struct platform_driver brcm_ahci_driver = { - .probe = brcm_ahci_probe, - .remove = brcm_ahci_remove, - .driver = { - .name = DRV_NAME, - .of_match_table = ahci_of_match, - .pm = &ahci_brcm_pm_ops, - }, -}; -module_platform_driver(brcm_ahci_driver); - -MODULE_DESCRIPTION("Broadcom SATA3 AHCI Controller Driver"); -MODULE_AUTHOR("Brian Norris"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:sata-brcmstb"); -- cgit v1.2.3