From 2d089f82aeb59fd58f33f2bbf4288e4049426e17 Mon Sep 17 00:00:00 2001 From: Peter Huewe Date: Thu, 28 Feb 2013 16:15:48 -0600 Subject: tpm/tpm_i2c_stm_st33: formatting and white space changes Signed-off-by: Peter Huewe Signed-off-by: Kent Yoder --- drivers/char/tpm/tpm_i2c_stm_st33.c | 62 ++++++++++++++++++------------------- 1 file changed, 31 insertions(+), 31 deletions(-) (limited to 'drivers/char') diff --git a/drivers/char/tpm/tpm_i2c_stm_st33.c b/drivers/char/tpm/tpm_i2c_stm_st33.c index 1f5f71e14abe..743ffecebcb1 100644 --- a/drivers/char/tpm/tpm_i2c_stm_st33.c +++ b/drivers/char/tpm/tpm_i2c_stm_st33.c @@ -178,7 +178,7 @@ static long _wait_for_interrupt_serirq_timeout(struct tpm_chip *chip, struct i2c_client *client; struct st33zp24_platform_data *pin_infos; - client = (struct i2c_client *) TPM_VPRIV(chip); + client = (struct i2c_client *)TPM_VPRIV(chip); pin_infos = client->dev.platform_data; status = wait_for_completion_interruptible_timeout( @@ -197,12 +197,12 @@ static int wait_for_serirq_timeout(struct tpm_chip *chip, bool condition, int status = 2; struct i2c_client *client; - client = (struct i2c_client *) TPM_VPRIV(chip); + client = (struct i2c_client *)TPM_VPRIV(chip); status = _wait_for_interrupt_serirq_timeout(chip, timeout); if (!status) { status = -EBUSY; - } else{ + } else { clear_interruption(client); if (condition) status = 1; @@ -219,7 +219,7 @@ static void tpm_stm_i2c_cancel(struct tpm_chip *chip) struct i2c_client *client; u8 data; - client = (struct i2c_client *) TPM_VPRIV(chip); + client = (struct i2c_client *)TPM_VPRIV(chip); data = TPM_STS_COMMAND_READY; I2C_WRITE_DATA(client, TPM_STS, &data, 1); @@ -236,7 +236,7 @@ static u8 tpm_stm_i2c_status(struct tpm_chip *chip) { struct i2c_client *client; u8 data; - client = (struct i2c_client *) TPM_VPRIV(chip); + client = (struct i2c_client *)TPM_VPRIV(chip); I2C_READ_DATA(client, TPM_STS, &data, 1); return data; @@ -254,7 +254,7 @@ static int check_locality(struct tpm_chip *chip) u8 data; u8 status; - client = (struct i2c_client *) TPM_VPRIV(chip); + client = (struct i2c_client *)TPM_VPRIV(chip); status = I2C_READ_DATA(client, TPM_ACCESS, &data, 1); if (status && (data & @@ -278,7 +278,7 @@ static int request_locality(struct tpm_chip *chip) struct i2c_client *client; u8 data; - client = (struct i2c_client *) TPM_VPRIV(chip); + client = (struct i2c_client *)TPM_VPRIV(chip); if (check_locality(chip) == chip->vendor.locality) return chip->vendor.locality; @@ -294,7 +294,7 @@ static int request_locality(struct tpm_chip *chip) chip->vendor.timeout_a); if (rc > 0) return chip->vendor.locality; - } else{ + } else { stop = jiffies + chip->vendor.timeout_a; do { if (check_locality(chip) >= 0) @@ -316,7 +316,7 @@ static void release_locality(struct tpm_chip *chip) struct i2c_client *client; u8 data; - client = (struct i2c_client *) TPM_VPRIV(chip); + client = (struct i2c_client *)TPM_VPRIV(chip); data = TPM_ACCESS_ACTIVE_LOCALITY; I2C_WRITE_DATA(client, TPM_ACCESS, &data, 1); @@ -333,7 +333,7 @@ static int get_burstcount(struct tpm_chip *chip) int burstcnt, status; u8 tpm_reg, temp; - struct i2c_client *client = (struct i2c_client *) TPM_VPRIV(chip); + struct i2c_client *client = (struct i2c_client *)TPM_VPRIV(chip); stop = jiffies + chip->vendor.timeout_d; do { @@ -379,7 +379,7 @@ static int wait_for_stat(struct tpm_chip *chip, u8 mask, unsigned long timeout, mask), timeout); if (rc > 0) return 0; - } else{ + } else { stop = jiffies + timeout; do { msleep(TPM_TIMEOUT); @@ -403,7 +403,7 @@ static int recv_data(struct tpm_chip *chip, u8 *buf, size_t count) int size = 0, burstcnt, len; struct i2c_client *client; - client = (struct i2c_client *) TPM_VPRIV(chip); + client = (struct i2c_client *)TPM_VPRIV(chip); while (size < count && wait_for_stat(chip, @@ -433,7 +433,7 @@ static irqreturn_t tpm_ioserirq_handler(int irq, void *dev_id) disable_irq_nosync(irq); - client = (struct i2c_client *) TPM_VPRIV(chip); + client = (struct i2c_client *)TPM_VPRIV(chip); pin_infos = client->dev.platform_data; complete(&pin_infos->irq_detection); @@ -453,8 +453,7 @@ static irqreturn_t tpm_ioserirq_handler(int irq, void *dev_id) static int tpm_stm_i2c_send(struct tpm_chip *chip, unsigned char *buf, size_t len) { - u32 status, - burstcnt = 0, i, size; + u32 status, burstcnt = 0, i, size; int ret; u8 data; struct i2c_client *client; @@ -483,7 +482,7 @@ static int tpm_stm_i2c_send(struct tpm_chip *chip, unsigned char *buf, } } - for (i = 0 ; i < len - 1 ;) { + for (i = 0; i < len - 1;) { burstcnt = get_burstcount(chip); size = min_t(int, len - i - 1, burstcnt); ret = I2C_WRITE_DATA(client, TPM_DATA_FIFO, buf, size); @@ -547,7 +546,7 @@ static int tpm_stm_i2c_recv(struct tpm_chip *chip, unsigned char *buf, goto out; } - expected = be32_to_cpu(*(__be32 *) (buf + 2)); + expected = be32_to_cpu(*(__be32 *)(buf + 2)); if (expected > count) { size = -EIO; goto out; @@ -569,7 +568,7 @@ out: static bool tpm_st33_i2c_req_canceled(struct tpm_chip *chip, u8 status) { - return (status == TPM_STS_COMMAND_READY); + return (status == TPM_STS_COMMAND_READY); } static const struct file_operations tpm_st33_i2c_fops = { @@ -617,7 +616,7 @@ static struct tpm_vendor_specific st_i2c_tpm = { .miscdev = {.fops = &tpm_st33_i2c_fops,}, }; -static int interrupts ; +static int interrupts; module_param(interrupts, int, 0444); MODULE_PARM_DESC(interrupts, "Enable interrupts"); @@ -714,7 +713,7 @@ tpm_st33_i2c_probe(struct i2c_client *client, const struct i2c_device_id *id) "TPM SERIRQ management", chip); if (err < 0) { dev_err(chip->dev , "TPM SERIRQ signals %d not available\n", - gpio_to_irq(platform_data->io_serirq)); + gpio_to_irq(platform_data->io_serirq)); goto _irq_set; } @@ -754,7 +753,7 @@ tpm_st33_i2c_probe(struct i2c_client *client, const struct i2c_device_id *id) dev_info(chip->dev, "TPM I2C Initialized\n"); return 0; _irq_set: - free_irq(gpio_to_irq(platform_data->io_serirq), (void *) chip); + free_irq(gpio_to_irq(platform_data->io_serirq), (void *)chip); _gpio_init2: if (interrupts) gpio_free(platform_data->io_serirq); @@ -784,7 +783,7 @@ static int tpm_st33_i2c_remove(struct i2c_client *client) { struct tpm_chip *chip = (struct tpm_chip *)i2c_get_clientdata(client); struct st33zp24_platform_data *pin_infos = - ((struct i2c_client *) TPM_VPRIV(chip))->dev.platform_data; + ((struct i2c_client *)TPM_VPRIV(chip))->dev.platform_data; if (pin_infos != NULL) { free_irq(pin_infos->io_serirq, chip); @@ -823,9 +822,9 @@ static int tpm_st33_i2c_pm_suspend(struct device *dev) struct st33zp24_platform_data *pin_infos = dev->platform_data; int ret = 0; - if (power_mgt) + if (power_mgt) { gpio_set_value(pin_infos->io_lpcpd, 0); - else{ + } else { if (chip->data_buffer == NULL) chip->data_buffer = pin_infos->tpm_i2c_buffer[0]; ret = tpm_pm_suspend(dev); @@ -851,12 +850,12 @@ static int tpm_st33_i2c_pm_resume(struct device *dev) (chip->vendor.status(chip) & TPM_STS_VALID) == TPM_STS_VALID, chip->vendor.timeout_b); - } else{ - if (chip->data_buffer == NULL) - chip->data_buffer = pin_infos->tpm_i2c_buffer[0]; - ret = tpm_pm_resume(dev); - if (!ret) - tpm_do_selftest(chip); + } else { + if (chip->data_buffer == NULL) + chip->data_buffer = pin_infos->tpm_i2c_buffer[0]; + ret = tpm_pm_resume(dev); + if (!ret) + tpm_do_selftest(chip); } return ret; } /* tpm_st33_i2c_pm_resume() */ @@ -867,7 +866,8 @@ static const struct i2c_device_id tpm_st33_i2c_id[] = { {} }; MODULE_DEVICE_TABLE(i2c, tpm_st33_i2c_id); -static SIMPLE_DEV_PM_OPS(tpm_st33_i2c_ops, tpm_st33_i2c_pm_suspend, tpm_st33_i2c_pm_resume); +static SIMPLE_DEV_PM_OPS(tpm_st33_i2c_ops, tpm_st33_i2c_pm_suspend, + tpm_st33_i2c_pm_resume); static struct i2c_driver tpm_st33_i2c_driver = { .driver = { .owner = THIS_MODULE, -- cgit v1.2.3 From e361200bfc3b72de8db246de209da55d6d60fd34 Mon Sep 17 00:00:00 2001 From: Chen Gang Date: Thu, 28 Feb 2013 16:24:50 -0600 Subject: drivers/char/tpm/tpm_ppi: use strlcpy instead of strncpy Ensure that the 'version' string includes a NULL terminator after its copied out of the acpi table. Signed-off-by: Chen Gang Signed-off-by: Kent Yoder --- drivers/char/tpm/tpm_ppi.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers/char') diff --git a/drivers/char/tpm/tpm_ppi.c b/drivers/char/tpm/tpm_ppi.c index 720ebcf29fdf..2168d15bc728 100644 --- a/drivers/char/tpm/tpm_ppi.c +++ b/drivers/char/tpm/tpm_ppi.c @@ -158,9 +158,9 @@ static ssize_t tpm_store_ppi_request(struct device *dev, ACPI_TYPE_STRING); if (ACPI_FAILURE(status)) return -ENOMEM; - strncpy(version, + strlcpy(version, ((union acpi_object *)output.pointer)->string.pointer, - PPI_VERSION_LEN); + PPI_VERSION_LEN + 1); kfree(output.pointer); output.length = ACPI_ALLOCATE_BUFFER; output.pointer = NULL; @@ -237,9 +237,9 @@ static ssize_t tpm_show_ppi_transition_action(struct device *dev, ACPI_TYPE_STRING); if (ACPI_FAILURE(status)) return -ENOMEM; - strncpy(version, + strlcpy(version, ((union acpi_object *)output.pointer)->string.pointer, - PPI_VERSION_LEN); + PPI_VERSION_LEN + 1); /* * PPI spec defines params[3].type as empty package, but some platforms * (e.g. Capella with PPI 1.0) need integer/string/buffer type, so for @@ -351,7 +351,7 @@ cleanup: static ssize_t show_ppi_operations(char *buf, u32 start, u32 end) { char *str = buf; - char version[PPI_VERSION_LEN]; + char version[PPI_VERSION_LEN + 1]; acpi_handle handle; acpi_status status; struct acpi_object_list input; @@ -381,9 +381,9 @@ static ssize_t show_ppi_operations(char *buf, u32 start, u32 end) if (ACPI_FAILURE(status)) return -ENOMEM; - strncpy(version, + strlcpy(version, ((union acpi_object *)output.pointer)->string.pointer, - PPI_VERSION_LEN); + PPI_VERSION_LEN + 1); kfree(output.pointer); output.length = ACPI_ALLOCATE_BUFFER; output.pointer = NULL; -- cgit v1.2.3 From eef8b6291987c059dacb07dd516d4ada0e3362af Mon Sep 17 00:00:00 2001 From: Shubhrajyoti Datta Date: Thu, 28 Feb 2013 11:06:11 +0100 Subject: char/tpm: Convert struct i2c_msg initialization to C99 format Convert the struct i2c_msg initialization to C99 format. This makes maintaining and editing the code simpler. Also helps once other fields like transferred are added in future. Thanks to Julia Lawall for automating the conversion. Signed-off-by: Shubhrajyoti D Acked-by: Peter Huewe Signed-off-by: Jean Delvare Signed-off-by: Kent Yoder --- drivers/char/tpm/tpm_i2c_infineon.c | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-) (limited to 'drivers/char') diff --git a/drivers/char/tpm/tpm_i2c_infineon.c b/drivers/char/tpm/tpm_i2c_infineon.c index 8fe7ac3d095b..8e47e2b99efc 100644 --- a/drivers/char/tpm/tpm_i2c_infineon.c +++ b/drivers/char/tpm/tpm_i2c_infineon.c @@ -90,8 +90,17 @@ static struct i2c_driver tpm_tis_i2c_driver; static int iic_tpm_read(u8 addr, u8 *buffer, size_t len) { - struct i2c_msg msg1 = { tpm_dev.client->addr, 0, 1, &addr }; - struct i2c_msg msg2 = { tpm_dev.client->addr, I2C_M_RD, len, buffer }; + struct i2c_msg msg1 = { + .addr = tpm_dev.client->addr, + .len = 1, + .buf = &addr + }; + struct i2c_msg msg2 = { + .addr = tpm_dev.client->addr, + .flags = I2C_M_RD, + .len = len, + .buf = buffer + }; int rc; int count; @@ -138,7 +147,11 @@ static int iic_tpm_write_generic(u8 addr, u8 *buffer, size_t len, int rc = -EIO; int count; - struct i2c_msg msg1 = { tpm_dev.client->addr, 0, len + 1, tpm_dev.buf }; + struct i2c_msg msg1 = { + .addr = tpm_dev.client->addr, + .len = len + 1, + .buf = tpm_dev.buf + }; if (len > TPM_BUFSIZE) return -EINVAL; -- cgit v1.2.3 From c61c86dd6e0a8037be73cf27212f389e46af60a4 Mon Sep 17 00:00:00 2001 From: Peter Huewe Date: Mon, 4 Mar 2013 15:41:46 +0100 Subject: tpm: Add support for new Infineon I2C TPM (SLB 9645 TT 1.2 I2C) This driver adds support for Infineon's new SLB 9645 TT 1.2 I2C TPMs, which supports clockstretching, combined reads and a bus speed of up to 400khz. The device also has a new device id. The driver works now also fine with device trees, so you can instantiate your device by adding: + tpm { + compatible = "infineon,slb9645tt"; + reg = <0x20>; + }; for SLB 9645 devices or + tpm { + compatible = "infineon,slb9635tt"; + reg = <0x20>; + }; for SLB 9635 devices to your device tree. tpm_i2c_infineon is also retained as a compatible id as a fallback to slb9635 protocol. The driver was tested on Beaglebone. Signed-off-by: Peter Huewe Signed-off-by: Kent Yoder --- drivers/char/tpm/tpm_i2c_infineon.c | 137 +++++++++++++++++++++++++----------- 1 file changed, 97 insertions(+), 40 deletions(-) (limited to 'drivers/char') diff --git a/drivers/char/tpm/tpm_i2c_infineon.c b/drivers/char/tpm/tpm_i2c_infineon.c index 8e47e2b99efc..bd9a2958dc39 100644 --- a/drivers/char/tpm/tpm_i2c_infineon.c +++ b/drivers/char/tpm/tpm_i2c_infineon.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2012 Infineon Technologies + * Copyright (C) 2012,2013 Infineon Technologies * * Authors: * Peter Huewe @@ -56,13 +56,21 @@ #define TPM_TIMEOUT_US_HI (TPM_TIMEOUT_US_LOW + 2000) /* expected value for DIDVID register */ -#define TPM_TIS_I2C_DID_VID 0x000b15d1L +#define TPM_TIS_I2C_DID_VID_9635 0xd1150b00L +#define TPM_TIS_I2C_DID_VID_9645 0x001a15d1L + +enum i2c_chip_type { + SLB9635, + SLB9645, + UNKNOWN, +}; /* Structure to store I2C TPM specific stuff */ struct tpm_inf_dev { struct i2c_client *client; u8 buf[TPM_BUFSIZE + sizeof(u8)]; /* max. buffer size + addr */ struct tpm_chip *chip; + enum i2c_chip_type chip_type; }; static struct tpm_inf_dev tpm_dev; @@ -101,8 +109,9 @@ static int iic_tpm_read(u8 addr, u8 *buffer, size_t len) .len = len, .buf = buffer }; + struct i2c_msg msgs[] = {msg1, msg2}; - int rc; + int rc = 0; int count; /* Lock the adapter for the duration of the whole sequence. */ @@ -110,30 +119,49 @@ static int iic_tpm_read(u8 addr, u8 *buffer, size_t len) return -EOPNOTSUPP; i2c_lock_adapter(tpm_dev.client->adapter); - for (count = 0; count < MAX_COUNT; count++) { - rc = __i2c_transfer(tpm_dev.client->adapter, &msg1, 1); - if (rc > 0) - break; /* break here to skip sleep */ - - usleep_range(SLEEP_DURATION_LOW, SLEEP_DURATION_HI); - } - - if (rc <= 0) - goto out; - - /* After the TPM has successfully received the register address it needs - * some time, thus we're sleeping here again, before retrieving the data - */ - for (count = 0; count < MAX_COUNT; count++) { - usleep_range(SLEEP_DURATION_LOW, SLEEP_DURATION_HI); - rc = __i2c_transfer(tpm_dev.client->adapter, &msg2, 1); - if (rc > 0) - break; + if (tpm_dev.chip_type == SLB9645) { + /* use a combined read for newer chips + * unfortunately the smbus functions are not suitable due to + * the 32 byte limit of the smbus. + * retries should usually not be needed, but are kept just to + * be on the safe side. + */ + for (count = 0; count < MAX_COUNT; count++) { + rc = __i2c_transfer(tpm_dev.client->adapter, msgs, 2); + if (rc > 0) + break; /* break here to skip sleep */ + usleep_range(SLEEP_DURATION_LOW, SLEEP_DURATION_HI); + } + } else { + /* slb9635 protocol should work in all cases */ + for (count = 0; count < MAX_COUNT; count++) { + rc = __i2c_transfer(tpm_dev.client->adapter, &msg1, 1); + if (rc > 0) + break; /* break here to skip sleep */ + + usleep_range(SLEEP_DURATION_LOW, SLEEP_DURATION_HI); + } + if (rc <= 0) + goto out; + + /* After the TPM has successfully received the register address + * it needs some time, thus we're sleeping here again, before + * retrieving the data + */ + for (count = 0; count < MAX_COUNT; count++) { + usleep_range(SLEEP_DURATION_LOW, SLEEP_DURATION_HI); + rc = __i2c_transfer(tpm_dev.client->adapter, &msg2, 1); + if (rc > 0) + break; + } } out: i2c_unlock_adapter(tpm_dev.client->adapter); + /* take care of 'guard time' */ + usleep_range(SLEEP_DURATION_LOW, SLEEP_DURATION_HI); + if (rc <= 0) return -EIO; @@ -167,16 +195,19 @@ static int iic_tpm_write_generic(u8 addr, u8 *buffer, size_t len, /* * NOTE: We have to use these special mechanisms here and unfortunately * cannot rely on the standard behavior of i2c_transfer. + * Even for newer chips the smbus functions are not + * suitable due to the 32 byte limit of the smbus. */ for (count = 0; count < max_count; count++) { rc = __i2c_transfer(tpm_dev.client->adapter, &msg1, 1); if (rc > 0) break; - usleep_range(sleep_low, sleep_hi); } i2c_unlock_adapter(tpm_dev.client->adapter); + /* take care of 'guard time' */ + usleep_range(SLEEP_DURATION_LOW, SLEEP_DURATION_HI); if (rc <= 0) return -EIO; @@ -296,11 +327,18 @@ static int request_locality(struct tpm_chip *chip, int loc) static u8 tpm_tis_i2c_status(struct tpm_chip *chip) { /* NOTE: since I2C read may fail, return 0 in this case --> time-out */ - u8 buf; - if (iic_tpm_read(TPM_STS(chip->vendor.locality), &buf, 1) < 0) - return 0; - else - return buf; + u8 buf = 0xFF; + u8 i = 0; + + do { + if (iic_tpm_read(TPM_STS(chip->vendor.locality), &buf, 1) < 0) + return 0; + + i++; + /* if locallity is set STS should not be 0xFF */ + } while ((buf == 0xFF) && i < 10); + + return buf; } static void tpm_tis_i2c_ready(struct tpm_chip *chip) @@ -341,7 +379,7 @@ static int wait_for_stat(struct tpm_chip *chip, u8 mask, unsigned long timeout, /* check current status */ *status = tpm_tis_i2c_status(chip); - if ((*status & mask) == mask) + if ((*status != 0xFF) && (*status & mask) == mask) return 0; stop = jiffies + timeout; @@ -385,7 +423,6 @@ static int recv_data(struct tpm_chip *chip, u8 *buf, size_t count) /* avoid endless loop in case of broken HW */ if (retries > MAX_COUNT_LONG) return -EIO; - } return size; } @@ -493,7 +530,6 @@ static int tpm_tis_i2c_send(struct tpm_chip *chip, u8 *buf, size_t len) rc = -EIO; goto out_err; } - } /* write last byte */ @@ -581,6 +617,7 @@ static int tpm_tis_i2c_init(struct device *dev) chip = tpm_register_hardware(dev, &tpm_tis_i2c); if (!chip) { + dev_err(dev, "could not register hardware\n"); rc = -ENODEV; goto out_err; } @@ -595,20 +632,24 @@ static int tpm_tis_i2c_init(struct device *dev) chip->vendor.timeout_d = msecs_to_jiffies(TIS_SHORT_TIMEOUT); if (request_locality(chip, 0) != 0) { + dev_err(dev, "could not request locality\n"); rc = -ENODEV; goto out_vendor; } /* read four bytes from DID_VID register */ if (iic_tpm_read(TPM_DID_VID(0), (u8 *)&vendor, 4) < 0) { + dev_err(dev, "could not read vendor id\n"); rc = -EIO; goto out_release; } - /* create DID_VID register value, after swapping to little-endian */ - vendor = be32_to_cpu((__be32) vendor); - - if (vendor != TPM_TIS_I2C_DID_VID) { + if (vendor == TPM_TIS_I2C_DID_VID_9645) { + tpm_dev.chip_type = SLB9645; + } else if (vendor == TPM_TIS_I2C_DID_VID_9635) { + tpm_dev.chip_type = SLB9635; + } else { + dev_err(dev, "vendor id did not match! ID was %08x\n", vendor); rc = -ENODEV; goto out_release; } @@ -644,22 +685,38 @@ out_err: static const struct i2c_device_id tpm_tis_i2c_table[] = { {"tpm_i2c_infineon", 0}, + {"slb9635tt", 0}, + {"slb9645tt", 1}, {}, }; MODULE_DEVICE_TABLE(i2c, tpm_tis_i2c_table); + +#ifdef CONFIG_OF +static const struct of_device_id tpm_tis_i2c_of_match[] = { + { .compatible = "infineon,tpm_i2c_infineon", .data = (void *)0 }, + { .compatible = "infineon,slb9635tt", .data = (void *)0 }, + { .compatible = "infineon,slb9645tt", .data = (void *)1 }, + {}, +}; +MODULE_DEVICE_TABLE(of, tpm_tis_i2c_of_match); +#endif + static SIMPLE_DEV_PM_OPS(tpm_tis_i2c_ops, tpm_pm_suspend, tpm_pm_resume); static int tpm_tis_i2c_probe(struct i2c_client *client, const struct i2c_device_id *id) { int rc; - if (tpm_dev.client != NULL) + struct device *dev = &(client->dev); + + if (tpm_dev.client != NULL) { + dev_err(dev, "This driver only supports one client at a time\n"); return -EBUSY; /* We only support one client */ + } if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { - dev_err(&client->dev, - "no algorithms associated to the i2c bus\n"); + dev_err(dev, "no algorithms associated to the i2c bus\n"); return -ENODEV; } @@ -695,7 +752,6 @@ static int tpm_tis_i2c_remove(struct i2c_client *client) } static struct i2c_driver tpm_tis_i2c_driver = { - .id_table = tpm_tis_i2c_table, .probe = tpm_tis_i2c_probe, .remove = tpm_tis_i2c_remove, @@ -703,11 +759,12 @@ static struct i2c_driver tpm_tis_i2c_driver = { .name = "tpm_i2c_infineon", .owner = THIS_MODULE, .pm = &tpm_tis_i2c_ops, + .of_match_table = of_match_ptr(tpm_tis_i2c_of_match), }, }; module_i2c_driver(tpm_tis_i2c_driver); MODULE_AUTHOR("Peter Huewe "); MODULE_DESCRIPTION("TPM TIS I2C Infineon Driver"); -MODULE_VERSION("2.1.5"); +MODULE_VERSION("2.2.0"); MODULE_LICENSE("GPL"); -- cgit v1.2.3 From 3320280b6fd7df65e3f211c0e4db66f637ca035f Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Wed, 6 Mar 2013 14:27:54 +0530 Subject: tpm_i2c_stm_st33: Remove duplicate inclusion of header files module.h and sched.h were included twice. Signed-off-by: Sachin Kamat Signed-off-by: Kent Yoder --- drivers/char/tpm/tpm_i2c_stm_st33.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers/char') diff --git a/drivers/char/tpm/tpm_i2c_stm_st33.c b/drivers/char/tpm/tpm_i2c_stm_st33.c index 743ffecebcb1..5bb8e2ddd3b3 100644 --- a/drivers/char/tpm/tpm_i2c_stm_st33.c +++ b/drivers/char/tpm/tpm_i2c_stm_st33.c @@ -36,7 +36,6 @@ #include #include #include -#include #include #include #include @@ -50,7 +49,6 @@ #include #include #include -#include #include "tpm.h" #include "tpm_i2c_stm_st33.h" -- cgit v1.2.3 From 21dc02eab989d260fd9e22b72a29ac139a727cdd Mon Sep 17 00:00:00 2001 From: Peter Huewe Date: Mon, 4 Mar 2013 22:08:54 +0100 Subject: tpm/tpm_i2c_infineon.c: Add OF attributes type and name to the of_device_id table entries As the subject says. It's probably a good idea to have these fields populated. Signed-off-by: Peter Huewe Signed-off-by: Kent Yoder --- drivers/char/tpm/tpm_i2c_infineon.c | 21 ++++++++++++++++++--- 1 file changed, 18 insertions(+), 3 deletions(-) (limited to 'drivers/char') diff --git a/drivers/char/tpm/tpm_i2c_infineon.c b/drivers/char/tpm/tpm_i2c_infineon.c index bd9a2958dc39..d83bb8c0217b 100644 --- a/drivers/char/tpm/tpm_i2c_infineon.c +++ b/drivers/char/tpm/tpm_i2c_infineon.c @@ -694,9 +694,24 @@ MODULE_DEVICE_TABLE(i2c, tpm_tis_i2c_table); #ifdef CONFIG_OF static const struct of_device_id tpm_tis_i2c_of_match[] = { - { .compatible = "infineon,tpm_i2c_infineon", .data = (void *)0 }, - { .compatible = "infineon,slb9635tt", .data = (void *)0 }, - { .compatible = "infineon,slb9645tt", .data = (void *)1 }, + { + .name = "tpm_i2c_infineon", + .type = "tpm", + .compatible = "infineon,tpm_i2c_infineon", + .data = (void *)0 + }, + { + .name = "slb9635tt", + .type = "tpm", + .compatible = "infineon,slb9635tt", + .data = (void *)0 + }, + { + .name = "slb9645tt", + .type = "tpm", + .compatible = "infineon,slb9645tt", + .data = (void *)1 + }, {}, }; MODULE_DEVICE_TABLE(of, tpm_tis_i2c_of_match); -- cgit v1.2.3 From 6aa4ef4dab92fc8d4f0e5ea735ae3fd520af510b Mon Sep 17 00:00:00 2001 From: Peter Huewe Date: Mon, 4 Mar 2013 22:17:15 +0100 Subject: tpm/tpm_i2c_infineon: Add small comment about return value of __i2c_transfer Kent Yoder indicated that the code might be a bit clearer with a comment here, so this patch adds a small explanation of the code. Signed-off-by: Peter Huewe Signed-off-by: Kent Yoder --- drivers/char/tpm/tpm_i2c_infineon.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers/char') diff --git a/drivers/char/tpm/tpm_i2c_infineon.c b/drivers/char/tpm/tpm_i2c_infineon.c index d83bb8c0217b..37d5dcc10ea7 100644 --- a/drivers/char/tpm/tpm_i2c_infineon.c +++ b/drivers/char/tpm/tpm_i2c_infineon.c @@ -162,6 +162,10 @@ out: /* take care of 'guard time' */ usleep_range(SLEEP_DURATION_LOW, SLEEP_DURATION_HI); + /* __i2c_transfer returns the number of successfully transferred + * messages. + * So rc should be greater than 0 here otherwise we have an error. + */ if (rc <= 0) return -EIO; @@ -208,6 +212,11 @@ static int iic_tpm_write_generic(u8 addr, u8 *buffer, size_t len, i2c_unlock_adapter(tpm_dev.client->adapter); /* take care of 'guard time' */ usleep_range(SLEEP_DURATION_LOW, SLEEP_DURATION_HI); + + /* __i2c_transfer returns the number of successfully transferred + * messages. + * So rc should be greater than 0 here otherwise we have an error. + */ if (rc <= 0) return -EIO; -- cgit v1.2.3 From 32d33b29ba077d6b45de35f2181e0a7411b162f4 Mon Sep 17 00:00:00 2001 From: Duncan Laurie Date: Sun, 17 Mar 2013 14:56:39 -0700 Subject: TPM: Retry SaveState command in suspend path If the TPM has already been sent a SaveState command before the driver is loaded it may have problems sending that same command again later. This issue is seen with the Chromebook Pixel due to a firmware bug in the legacy mode boot path which is sending the SaveState command before booting the kernel. More information is available at http://crbug.com/203524 This change introduces a retry of the SaveState command in the suspend path in order to work around this issue. A future firmware update should fix this but this is also a trivial workaround in the driver that has no effect on systems that do not show this problem. When this does happen the TPM responds with a non-fatal TPM_RETRY code that is defined in the specification: The TPM is too busy to respond to the command immediately, but the command could be resubmitted at a later time. The TPM MAY return TPM_RETRY for any command at any time. It can take several seconds before the TPM will respond again. I measured a typical time between 3 and 4 seconds and the timeout is set at a safe 5 seconds. It is also possible to reproduce this with commands via /dev/tpm0. The bug linked above has a python script attached which can be used to test for this problem. I tested a variety of TPMs from Infineon, Nuvoton, Atmel, and STMicro but was only able to reproduce this with LPC and I2C TPMs from Infineon. The TPM specification only loosely defines this behavior: TPM Main Level 2 Part 3 v1.2 r116, section 3.3. TPM_SaveState: The TPM MAY declare all preserved values invalid in response to any command other than TPM_Init. TCG PC Client BIOS Spec 1.21 section 8.3.1. After issuing a TPM_SaveState command, the OS SHOULD NOT issue TPM commands before transitioning to S3 without issuing another TPM_SaveState command. TCG PC Client TIS 1.21, section 4. Power Management: The TPM_SaveState command allows a Static OS to indicate to the TPM that the platform may enter a low power state where the TPM will be required to enter into the D3 power state. The use of the term "may" is significant in that there is no requirement for the platform to actually enter the low power state after sending the TPM_SaveState command. The software may, in fact, send subsequent commands after sending the TPM_SaveState command. Change-Id: I52b41e826412688e5b6c8ddd3bb16409939704e9 Signed-off-by: Duncan Laurie Signed-off-by: Kent Yoder --- drivers/char/tpm/tpm.c | 31 +++++++++++++++++++++++++++---- drivers/char/tpm/tpm.h | 3 +++ 2 files changed, 30 insertions(+), 4 deletions(-) (limited to 'drivers/char') diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c index 0d2e82f95577..7c3b3dcbfbc8 100644 --- a/drivers/char/tpm/tpm.c +++ b/drivers/char/tpm/tpm.c @@ -1337,7 +1337,7 @@ int tpm_pm_suspend(struct device *dev) { struct tpm_chip *chip = dev_get_drvdata(dev); struct tpm_cmd_t cmd; - int rc; + int rc, try; u8 dummy_hash[TPM_DIGEST_SIZE] = { 0 }; @@ -1355,9 +1355,32 @@ int tpm_pm_suspend(struct device *dev) } /* now do the actual savestate */ - cmd.header.in = savestate_header; - rc = transmit_cmd(chip, &cmd, SAVESTATE_RESULT_SIZE, - "sending savestate before suspend"); + for (try = 0; try < TPM_RETRY; try++) { + cmd.header.in = savestate_header; + rc = transmit_cmd(chip, &cmd, SAVESTATE_RESULT_SIZE, NULL); + + /* + * If the TPM indicates that it is too busy to respond to + * this command then retry before giving up. It can take + * several seconds for this TPM to be ready. + * + * This can happen if the TPM has already been sent the + * SaveState command before the driver has loaded. TCG 1.2 + * specification states that any communication after SaveState + * may cause the TPM to invalidate previously saved state. + */ + if (rc != TPM_WARN_RETRY) + break; + msleep(TPM_TIMEOUT_RETRY); + } + + if (rc) + dev_err(chip->dev, + "Error (%d) sending savestate before suspend\n", rc); + else if (try > 0) + dev_warn(chip->dev, "TPM savestate took %dms\n", + try * TPM_TIMEOUT_RETRY); + return rc; } EXPORT_SYMBOL_GPL(tpm_pm_suspend); diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h index 81b52015f669..0770d1d79366 100644 --- a/drivers/char/tpm/tpm.h +++ b/drivers/char/tpm/tpm.h @@ -32,10 +32,12 @@ enum tpm_const { TPM_MINOR = 224, /* officially assigned */ TPM_BUFSIZE = 4096, TPM_NUM_DEVICES = 256, + TPM_RETRY = 50, /* 5 seconds */ }; enum tpm_timeout { TPM_TIMEOUT = 5, /* msecs */ + TPM_TIMEOUT_RETRY = 100 /* msecs */ }; /* TPM addresses */ @@ -44,6 +46,7 @@ enum tpm_addr { TPM_ADDR = 0x4E, }; +#define TPM_WARN_RETRY 0x800 #define TPM_WARN_DOING_SELFTEST 0x802 #define TPM_ERR_DEACTIVATED 0x6 #define TPM_ERR_DISABLED 0x7 -- cgit v1.2.3