From 542acfec4e313c001f9b82332f4fa2848ec7bf58 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Fri, 25 Feb 2022 15:35:31 +0100 Subject: clk: bcm: rpi: Set a default minimum rate The M2MC clock provides the state machine clock for both HDMI controllers. However, if no HDMI monitor is plugged in at boot, its clock rate will be left at 0 by the firmware and will make any register access end up in a CPU stall, even though the clock was enabled. We had some code in the HDMI controller to deal with this before, but it makes more sense to have it in the clock driver. Move it there. Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20220225143534.405820-10-maxime@cerno.tech Signed-off-by: Stephen Boyd --- drivers/clk/bcm/clk-raspberrypi.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) (limited to 'drivers/clk/bcm') diff --git a/drivers/clk/bcm/clk-raspberrypi.c b/drivers/clk/bcm/clk-raspberrypi.c index f7185d421085..c879f2e9a4a7 100644 --- a/drivers/clk/bcm/clk-raspberrypi.c +++ b/drivers/clk/bcm/clk-raspberrypi.c @@ -76,6 +76,7 @@ struct raspberrypi_clk_data { struct raspberrypi_clk_variant { bool export; char *clkdev; + unsigned long min_rate; }; static struct raspberrypi_clk_variant @@ -89,6 +90,18 @@ raspberrypi_clk_variants[RPI_FIRMWARE_NUM_CLK_ID] = { }, [RPI_FIRMWARE_M2MC_CLK_ID] = { .export = true, + + /* + * If we boot without any cable connected to any of the + * HDMI connector, the firmware will skip the HSM + * initialization and leave it with a rate of 0, + * resulting in a bus lockup when we're accessing the + * registers even if it's enabled. + * + * Let's put a sensible default so that we don't end up + * in this situation. + */ + .min_rate = 120000000, }, [RPI_FIRMWARE_V3D_CLK_ID] = { .export = true, @@ -267,6 +280,19 @@ static struct clk_hw *raspberrypi_clk_register(struct raspberrypi_clk *rpi, } } + if (variant->min_rate) { + unsigned long rate; + + clk_hw_set_rate_range(&data->hw, variant->min_rate, max_rate); + + rate = raspberrypi_fw_get_rate(&data->hw, 0); + if (rate < variant->min_rate) { + ret = raspberrypi_fw_set_rate(&data->hw, variant->min_rate, 0); + if (ret) + return ERR_PTR(ret); + } + } + return &data->hw; } -- cgit v1.2.3