From 3d69dd50517f4a1c037298ac4af85aae1d070879 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 19 Jun 2013 11:18:20 +0530 Subject: cpufreq: arm-big-little: call CPUFREQ_POSTCHANGE notfier in error cases PRECHANGE and POSTCHANGE notifiers must be called in groups, i.e either both should be called or both shouldn't be. In case we have started PRECHANGE notifier and found an error, we must call POSTCHANGE notifier with freqs.new = freqs.old to guarantee that sequence of calling notifiers is complete. This patch fixes it. This also removes code setting policy->cur as this is also done by POSTCHANGE notifier. Signed-off-by: Viresh Kumar --- drivers/cpufreq/arm_big_little.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers/cpufreq') diff --git a/drivers/cpufreq/arm_big_little.c b/drivers/cpufreq/arm_big_little.c index 5d7f53fcd6f5..3549f0784af1 100644 --- a/drivers/cpufreq/arm_big_little.c +++ b/drivers/cpufreq/arm_big_little.c @@ -84,11 +84,9 @@ static int bL_cpufreq_set_target(struct cpufreq_policy *policy, ret = clk_set_rate(clk[cur_cluster], freqs.new * 1000); if (ret) { pr_err("clk_set_rate failed: %d\n", ret); - return ret; + freqs.new = freqs.old; } - policy->cur = freqs.new; - cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); return ret; -- cgit v1.2.3 From f20b97d9faed5b5e0c57fcf921297a92723a85da Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 19 Jun 2013 11:18:20 +0530 Subject: cpufreq: davinci: call CPUFREQ_POSTCHANGE notfier in error cases PRECHANGE and POSTCHANGE notifiers must be called in groups, i.e either both should be called or both shouldn't be. In case we have started PRECHANGE notifier and found an error, we must call POSTCHANGE notifier with freqs.new = freqs.old to guarantee that sequence of calling notifiers is complete. Davinci driver was taking care of it but frequency isn't restored to freqs.old. This patch fixes it. Acked-by: Sekhar Nori Signed-off-by: Viresh Kumar --- drivers/cpufreq/davinci-cpufreq.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/cpufreq') diff --git a/drivers/cpufreq/davinci-cpufreq.c b/drivers/cpufreq/davinci-cpufreq.c index c33c76c360fa..551dd655c6f2 100644 --- a/drivers/cpufreq/davinci-cpufreq.c +++ b/drivers/cpufreq/davinci-cpufreq.c @@ -114,6 +114,9 @@ static int davinci_target(struct cpufreq_policy *policy, pdata->set_voltage(idx); out: + if (ret) + freqs.new = freqs.old; + cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); return ret; -- cgit v1.2.3 From 803c126af699602561a3ddb1814354993e4395b6 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 19 Jun 2013 11:18:20 +0530 Subject: cpufreq: dbx500: call CPUFREQ_POSTCHANGE notfier in error cases PRECHANGE and POSTCHANGE notifiers must be called in groups, i.e either both should be called or both shouldn't be. In case we have started PRECHANGE notifier and found an error, we must call POSTCHANGE notifier with freqs.new = freqs.old to guarantee that sequence of calling notifiers is complete. This patch fixes it. Acked-by: Linus Walleij Signed-off-by: Viresh Kumar --- drivers/cpufreq/dbx500-cpufreq.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/cpufreq') diff --git a/drivers/cpufreq/dbx500-cpufreq.c b/drivers/cpufreq/dbx500-cpufreq.c index 6ec6539ae041..1fdb02b9f1ec 100644 --- a/drivers/cpufreq/dbx500-cpufreq.c +++ b/drivers/cpufreq/dbx500-cpufreq.c @@ -57,13 +57,13 @@ static int dbx500_cpufreq_target(struct cpufreq_policy *policy, if (ret) { pr_err("dbx500-cpufreq: Failed to set armss_clk to %d Hz: error %d\n", freqs.new * 1000, ret); - return ret; + freqs.new = freqs.old; } /* post change notification */ cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); - return 0; + return ret; } static unsigned int dbx500_cpufreq_getspeed(unsigned int cpu) -- cgit v1.2.3 From c3aca6b1ce17a2e866788bc2bd40e25ef6e5ba58 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 19 Jun 2013 11:18:20 +0530 Subject: cpufreq: exynos: call CPUFREQ_POSTCHANGE notfier in error cases PRECHANGE and POSTCHANGE notifiers must be called in groups, i.e either both should be called or both shouldn't be. In case we have started PRECHANGE notifier and found an error, we must call POSTCHANGE notifier with freqs.new = freqs.old to guarantee that sequence of calling notifiers is complete. This patch fixes it. Cc: Kukjin Kim Signed-off-by: Viresh Kumar --- drivers/cpufreq/exynos-cpufreq.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers/cpufreq') diff --git a/drivers/cpufreq/exynos-cpufreq.c b/drivers/cpufreq/exynos-cpufreq.c index 475b4f607f0d..0d32f02ef4d6 100644 --- a/drivers/cpufreq/exynos-cpufreq.c +++ b/drivers/cpufreq/exynos-cpufreq.c @@ -113,7 +113,8 @@ static int exynos_cpufreq_scale(unsigned int target_freq) if (ret) { pr_err("%s: failed to set cpu voltage to %d\n", __func__, arm_volt); - goto out; + freqs.new = freqs.old; + goto post_notify; } } @@ -123,14 +124,19 @@ static int exynos_cpufreq_scale(unsigned int target_freq) if (ret) { pr_err("%s: failed to set cpu voltage to %d\n", __func__, safe_arm_volt); - goto out; + freqs.new = freqs.old; + goto post_notify; } } exynos_info->set_freq(old_index, index); +post_notify: cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); + if (ret) + goto out; + /* When the new frequency is lower than current frequency */ if ((freqs.new < freqs.old) || ((freqs.new > freqs.old) && safe_arm_volt)) { -- cgit v1.2.3 From 5a571c352db1eb0aa6325d71807bb40b972faa3b Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 19 Jun 2013 11:18:20 +0530 Subject: cpufreq: imx6q: call CPUFREQ_POSTCHANGE notfier in error cases PRECHANGE and POSTCHANGE notifiers must be called in groups, i.e either both should be called or both shouldn't be. In case we have started PRECHANGE notifier and found an error, we must call POSTCHANGE notifier with freqs.new = freqs.old to guarantee that sequence of calling notifiers is complete. This patch fixes it. This also moves PRECHANGE notifier down so that we call it just before starting frequency transition. Acked-by: Shawn Guo Signed-off-by: Viresh Kumar --- drivers/cpufreq/imx6q-cpufreq.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) (limited to 'drivers/cpufreq') diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c index b78bc35973ba..e37cdaedbb5b 100644 --- a/drivers/cpufreq/imx6q-cpufreq.c +++ b/drivers/cpufreq/imx6q-cpufreq.c @@ -68,8 +68,6 @@ static int imx6q_set_target(struct cpufreq_policy *policy, if (freqs.old == freqs.new) return 0; - cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); - rcu_read_lock(); opp = opp_find_freq_ceil(cpu_dev, &freq_hz); if (IS_ERR(opp)) { @@ -86,13 +84,16 @@ static int imx6q_set_target(struct cpufreq_policy *policy, freqs.old / 1000, volt_old / 1000, freqs.new / 1000, volt / 1000); + cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); + /* scaling up? scale voltage before frequency */ if (freqs.new > freqs.old) { ret = regulator_set_voltage_tol(arm_reg, volt, 0); if (ret) { dev_err(cpu_dev, "failed to scale vddarm up: %d\n", ret); - return ret; + freqs.new = freqs.old; + goto post_notify; } /* @@ -145,15 +146,18 @@ static int imx6q_set_target(struct cpufreq_policy *policy, if (ret) { dev_err(cpu_dev, "failed to set clock rate: %d\n", ret); regulator_set_voltage_tol(arm_reg, volt_old, 0); - return ret; + freqs.new = freqs.old; + goto post_notify; } /* scaling down? scale voltage after frequency */ if (freqs.new < freqs.old) { ret = regulator_set_voltage_tol(arm_reg, volt, 0); - if (ret) + if (ret) { dev_warn(cpu_dev, "failed to scale vddarm down: %d\n", ret); + ret = 0; + } if (freqs.old == FREQ_1P2_GHZ / 1000) { regulator_set_voltage_tol(pu_reg, @@ -163,9 +167,10 @@ static int imx6q_set_target(struct cpufreq_policy *policy, } } +post_notify: cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); - return 0; + return ret; } static int imx6q_cpufreq_init(struct cpufreq_policy *policy) -- cgit v1.2.3 From 44a49a23c97d9442f4eafe011913897c77bd3075 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 19 Jun 2013 11:18:20 +0530 Subject: cpufreq: omap: call CPUFREQ_POSTCHANGE notfier in error cases PRECHANGE and POSTCHANGE notifiers must be called in groups, i.e either both should be called or both shouldn't be. In case we have started PRECHANGE notifier and found an error, we must call POSTCHANGE notifier with freqs.new = freqs.old to guarantee that sequence of calling notifiers is complete. Omap driver was taking care of it well, but wasn't restoring freqs.new to freqs.old in some cases. I wasn't required to add code for it as moving PRECHANGE notifier down was a better option, so that we call it just before starting frequency transition. Acked-by: Santosh Shilimkar Signed-off-by: Viresh Kumar --- drivers/cpufreq/omap-cpufreq.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/cpufreq') diff --git a/drivers/cpufreq/omap-cpufreq.c b/drivers/cpufreq/omap-cpufreq.c index 0279d18a57f9..29468a522ee9 100644 --- a/drivers/cpufreq/omap-cpufreq.c +++ b/drivers/cpufreq/omap-cpufreq.c @@ -93,9 +93,6 @@ static int omap_target(struct cpufreq_policy *policy, if (freqs.old == freqs.new && policy->cur == freqs.new) return ret; - /* notifiers */ - cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); - freq = freqs.new * 1000; ret = clk_round_rate(mpu_clk, freq); if (IS_ERR_VALUE(ret)) { @@ -125,6 +122,9 @@ static int omap_target(struct cpufreq_policy *policy, freqs.old / 1000, volt_old ? volt_old / 1000 : -1, freqs.new / 1000, volt ? volt / 1000 : -1); + /* notifiers */ + cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); + /* scaling up? scale voltage before frequency */ if (mpu_reg && (freqs.new > freqs.old)) { r = regulator_set_voltage(mpu_reg, volt - tol, volt + tol); -- cgit v1.2.3 From 6cdc9ef32c62d3863c922300b00ef29718f06593 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 19 Jun 2013 11:18:20 +0530 Subject: cpufreq: s3c64xx: call CPUFREQ_POSTCHANGE notfier in error cases PRECHANGE and POSTCHANGE notifiers must be called in groups, i.e either both should be called or both shouldn't be. In case we have started PRECHANGE notifier and found an error, we must call POSTCHANGE notifier with freqs.new = freqs.old to guarantee that sequence of calling notifiers is complete. This patch fixes it. Cc: Mark Brown Signed-off-by: Viresh Kumar --- drivers/cpufreq/s3c64xx-cpufreq.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers/cpufreq') diff --git a/drivers/cpufreq/s3c64xx-cpufreq.c b/drivers/cpufreq/s3c64xx-cpufreq.c index 27cacb524796..017ade0af36b 100644 --- a/drivers/cpufreq/s3c64xx-cpufreq.c +++ b/drivers/cpufreq/s3c64xx-cpufreq.c @@ -104,7 +104,8 @@ static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy, if (ret != 0) { pr_err("Failed to set VDDARM for %dkHz: %d\n", freqs.new, ret); - goto err; + freqs.new = freqs.old; + goto post_notify; } } #endif @@ -113,10 +114,13 @@ static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy, if (ret < 0) { pr_err("Failed to set rate %dkHz: %d\n", freqs.new, ret); - goto err; + freqs.new = freqs.old; } +post_notify: cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); + if (ret) + goto err; #ifdef CONFIG_REGULATOR if (vddarm && freqs.new < freqs.old) { -- cgit v1.2.3 From f56cc99e3f189ce214408e9c0fdda9e664d83dc1 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 19 Jun 2013 11:18:20 +0530 Subject: cpufreq: tegra: call CPUFREQ_POSTCHANGE notfier in error cases PRECHANGE and POSTCHANGE notifiers must be called in groups, i.e either both should be called or both shouldn't be. In case we have started PRECHANGE notifier and found an error, we must call POSTCHANGE notifier with freqs.new = freqs.old to guarantee that sequence of calling notifiers is complete. This patch fixes it. Acked-by: Stephen Warren Signed-off-by: Viresh Kumar --- drivers/cpufreq/tegra-cpufreq.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/cpufreq') diff --git a/drivers/cpufreq/tegra-cpufreq.c b/drivers/cpufreq/tegra-cpufreq.c index c74c0e130ef4..e74d7774cf1e 100644 --- a/drivers/cpufreq/tegra-cpufreq.c +++ b/drivers/cpufreq/tegra-cpufreq.c @@ -138,12 +138,12 @@ static int tegra_update_cpu_speed(struct cpufreq_policy *policy, if (ret) { pr_err("cpu-tegra: Failed to set cpu frequency to %d kHz\n", freqs.new); - return ret; + freqs.new = freqs.old; } cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); - return 0; + return ret; } static unsigned long tegra_cpu_highest_speed(void) -- cgit v1.2.3