From 48b2ae7fe9d0eba523a3633ff0f939aba9e962e2 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 2 Apr 2015 08:06:12 -0700 Subject: hwmon: (it87) Use BIT macro Using the BIT macro makes the code a little easier to read and has the added benefit of making checkpatch happy. Tested-by: Martin Blumenstingl Signed-off-by: Guenter Roeck --- drivers/hwmon/it87.c | 290 ++++++++++++++++++++++++++------------------------- 1 file changed, 146 insertions(+), 144 deletions(-) (limited to 'drivers/hwmon/it87.c') diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index 96876755376c..0d6d106d53a2 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -52,6 +52,7 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt +#include #include #include #include @@ -267,23 +268,23 @@ struct it87_devices { u8 old_peci_mask; }; -#define FEAT_12MV_ADC (1 << 0) -#define FEAT_NEWER_AUTOPWM (1 << 1) -#define FEAT_OLD_AUTOPWM (1 << 2) -#define FEAT_16BIT_FANS (1 << 3) -#define FEAT_TEMP_OFFSET (1 << 4) -#define FEAT_TEMP_PECI (1 << 5) -#define FEAT_TEMP_OLD_PECI (1 << 6) -#define FEAT_FAN16_CONFIG (1 << 7) /* Need to enable 16-bit fans */ -#define FEAT_FIVE_FANS (1 << 8) /* Supports five fans */ -#define FEAT_VID (1 << 9) /* Set if chip supports VID */ -#define FEAT_IN7_INTERNAL (1 << 10) /* Set if in7 is internal */ -#define FEAT_SIX_FANS (1 << 11) /* Supports six fans */ -#define FEAT_10_9MV_ADC (1 << 12) -#define FEAT_AVCC3 (1 << 13) /* Chip supports in9/AVCC3 */ -#define FEAT_SIX_PWM (1 << 14) /* Chip supports 6 pwm chn */ -#define FEAT_PWM_FREQ2 (1 << 15) /* Separate pwm freq 2 */ -#define FEAT_SIX_TEMP (1 << 16) /* Up to 6 temp sensors */ +#define FEAT_12MV_ADC BIT(0) +#define FEAT_NEWER_AUTOPWM BIT(1) +#define FEAT_OLD_AUTOPWM BIT(2) +#define FEAT_16BIT_FANS BIT(3) +#define FEAT_TEMP_OFFSET BIT(4) +#define FEAT_TEMP_PECI BIT(5) +#define FEAT_TEMP_OLD_PECI BIT(6) +#define FEAT_FAN16_CONFIG BIT(7) /* Need to enable 16-bit fans */ +#define FEAT_FIVE_FANS BIT(8) /* Supports five fans */ +#define FEAT_VID BIT(9) /* Set if chip supports VID */ +#define FEAT_IN7_INTERNAL BIT(10) /* Set if in7 is internal */ +#define FEAT_SIX_FANS BIT(11) /* Supports six fans */ +#define FEAT_10_9MV_ADC BIT(12) +#define FEAT_AVCC3 BIT(13) /* Chip supports in9/AVCC3 */ +#define FEAT_SIX_PWM BIT(14) /* Chip supports 6 pwm chn */ +#define FEAT_PWM_FREQ2 BIT(15) /* Separate pwm freq 2 */ +#define FEAT_SIX_TEMP BIT(16) /* Up to 6 temp sensors */ static const struct it87_devices it87_devices[] = { [it87] = { @@ -433,10 +434,10 @@ static const struct it87_devices it87_devices[] = { #define has_old_autopwm(data) ((data)->features & FEAT_OLD_AUTOPWM) #define has_temp_offset(data) ((data)->features & FEAT_TEMP_OFFSET) #define has_temp_peci(data, nr) (((data)->features & FEAT_TEMP_PECI) && \ - ((data)->peci_mask & (1 << nr))) + ((data)->peci_mask & BIT(nr))) #define has_temp_old_peci(data, nr) \ (((data)->features & FEAT_TEMP_OLD_PECI) && \ - ((data)->old_peci_mask & (1 << nr))) + ((data)->old_peci_mask & BIT(nr))) #define has_fan16_config(data) ((data)->features & FEAT_FAN16_CONFIG) #define has_five_fans(data) ((data)->features & (FEAT_FIVE_FANS | \ FEAT_SIX_FANS)) @@ -530,7 +531,7 @@ static int adc_lsb(const struct it87_data *data, int nr) lsb = 109; else lsb = 160; - if (data->in_scaled & (1 << nr)) + if (data->in_scaled & BIT(nr)) lsb <<= 1; return lsb; } @@ -595,7 +596,8 @@ static int DIV_TO_REG(int val) answer++; return answer; } -#define DIV_FROM_REG(val) (1 << (val)) + +#define DIV_FROM_REG(val) BIT(val) /* * PWM base frequencies. The frequency has to be divided by either 128 or 256, @@ -685,7 +687,7 @@ static struct it87_data *it87_update_device(struct device *dev) it87_read_value(data, IT87_REG_CONFIG) | 0x40); } for (i = 0; i < ARRAY_SIZE(IT87_REG_VIN); i++) { - if (!(data->has_in & (1 << i))) + if (!(data->has_in & BIT(i))) continue; data->in[i][0] = @@ -703,7 +705,7 @@ static struct it87_data *it87_update_device(struct device *dev) for (i = 0; i < 6; i++) { /* Skip disabled fans */ - if (!(data->has_fan & (1 << i))) + if (!(data->has_fan & BIT(i))) continue; data->fan[i][1] = @@ -719,7 +721,7 @@ static struct it87_data *it87_update_device(struct device *dev) } } for (i = 0; i < 6; i++) { - if (!(data->has_temp & (1 << i))) + if (!(data->has_temp & BIT(i))) continue; data->temp[i][0] = it87_read_value(data, IT87_REG_TEMP(i)); @@ -1026,7 +1028,7 @@ static SENSOR_DEVICE_ATTR(temp3_type, S_IRUGO | S_IWUSR, show_temp_type, static int pwm_mode(const struct it87_data *data, int nr) { - int ctrl = data->fan_main_ctrl & (1 << nr); + int ctrl = data->fan_main_ctrl & BIT(nr); if (ctrl == 0 && data->type != it8603) /* Full speed */ return 0; @@ -1059,7 +1061,7 @@ static ssize_t show_fan_div(struct device *dev, struct device_attribute *attr, int nr = sensor_attr->index; struct it87_data *data = it87_update_device(dev); - return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr])); + return sprintf(buf, "%lu\n", DIV_FROM_REG(data->fan_div[nr])); } static ssize_t show_pwm_enable(struct device *dev, struct device_attribute *attr, char *buf) @@ -1243,9 +1245,9 @@ static ssize_t set_pwm_enable(struct device *dev, int tmp; /* make sure the fan is on when in on/off mode */ tmp = it87_read_value(data, IT87_REG_FAN_CTL); - it87_write_value(data, IT87_REG_FAN_CTL, tmp | (1 << nr)); + it87_write_value(data, IT87_REG_FAN_CTL, tmp | BIT(nr)); /* set on/off mode */ - data->fan_main_ctrl &= ~(1 << nr); + data->fan_main_ctrl &= ~BIT(nr); it87_write_value(data, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl); } else { @@ -1259,7 +1261,7 @@ static ssize_t set_pwm_enable(struct device *dev, if (data->type != it8603) { /* set SmartGuardian mode */ - data->fan_main_ctrl |= (1 << nr); + data->fan_main_ctrl |= BIT(nr); it87_write_value(data, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl); } @@ -1353,7 +1355,7 @@ static ssize_t show_pwm_temp_map(struct device *dev, int map; if (data->pwm_temp_map[nr] < 3) - map = 1 << data->pwm_temp_map[nr]; + map = BIT(data->pwm_temp_map[nr]); else map = 0; /* Should never happen */ return sprintf(buf, "%d\n", map); @@ -1372,13 +1374,13 @@ static ssize_t set_pwm_temp_map(struct device *dev, return -EINVAL; switch (val) { - case (1 << 0): + case BIT(0): reg = 0x00; break; - case (1 << 1): + case BIT(1): reg = 0x01; break; - case (1 << 2): + case BIT(2): reg = 0x02; break; default: @@ -1625,7 +1627,7 @@ static ssize_t clear_intrusion(struct device *dev, struct device_attribute if (config < 0) { count = config; } else { - config |= 1 << 5; + config |= BIT(5); it87_write_value(data, IT87_REG_CONFIG, config); /* Invalidate cache to force re-read */ data->valid = 0; @@ -1676,9 +1678,9 @@ static ssize_t set_beep(struct device *dev, struct device_attribute *attr, mutex_lock(&data->update_lock); data->beeps = it87_read_value(data, IT87_REG_BEEP_ENABLE); if (val) - data->beeps |= (1 << bitnr); + data->beeps |= BIT(bitnr); else - data->beeps &= ~(1 << bitnr); + data->beeps &= ~BIT(bitnr); it87_write_value(data, IT87_REG_BEEP_ENABLE, data->beeps); mutex_unlock(&data->update_lock); return count; @@ -1777,7 +1779,7 @@ static umode_t it87_in_is_visible(struct kobject *kobj, a = 0; } - if (!(data->has_in & (1 << i))) + if (!(data->has_in & BIT(i))) return 0; if (a == 4 && !data->has_beep) @@ -1860,7 +1862,7 @@ static umode_t it87_temp_is_visible(struct kobject *kobj, a = 0; } - if (!(data->has_temp & (1 << i))) + if (!(data->has_temp & BIT(i))) return 0; if (a == 5 && !has_temp_offset(data)) @@ -1917,7 +1919,7 @@ static umode_t it87_is_visible(struct kobject *kobj, if ((index == 2 || index == 3) && !data->has_vid) return 0; - if (index > 3 && !(data->in_internal & (1 << (index - 4)))) + if (index > 3 && !(data->in_internal & BIT(index - 4))) return 0; return attr->mode; @@ -1953,7 +1955,7 @@ static umode_t it87_fan_is_visible(struct kobject *kobj, a = (index - 15) % 4; } - if (!(data->has_fan & (1 << i))) + if (!(data->has_fan & BIT(i))) return 0; if (a == 3) { /* beep */ @@ -2019,7 +2021,7 @@ static umode_t it87_pwm_is_visible(struct kobject *kobj, int i = index / 4; /* pwm index */ int a = index % 4; /* attribute index */ - if (!(data->has_pwm & (1 << i))) + if (!(data->has_pwm & BIT(i))) return 0; /* pwmX_auto_channels_temp is only writable for old auto pwm */ @@ -2079,7 +2081,7 @@ static umode_t it87_auto_pwm_is_visible(struct kobject *kobj, struct it87_data *data = dev_get_drvdata(dev); int i = index / 9; /* pwm index */ - if (!(data->has_pwm & (1 << i))) + if (!(data->has_pwm & BIT(i))) return 0; return attr->mode; @@ -2223,19 +2225,19 @@ static int __init it87_find(int sioaddr, unsigned short *address, /* in7 (VSB or VCCH5V) is always internal on some chips */ if (has_in7_internal(config)) - sio_data->internal |= (1 << 1); + sio_data->internal |= BIT(1); /* in8 (Vbat) is always internal */ - sio_data->internal |= (1 << 2); + sio_data->internal |= BIT(2); /* in9 (AVCC3), always internal if supported */ if (has_avcc3(config)) - sio_data->internal |= (1 << 3); /* in9 is AVCC */ + sio_data->internal |= BIT(3); /* in9 is AVCC */ else - sio_data->skip_in |= (1 << 9); + sio_data->skip_in |= BIT(9); if (!has_six_pwm(config)) - sio_data->skip_pwm |= (1 << 3) | (1 << 4) | (1 << 5); + sio_data->skip_pwm |= BIT(3) | BIT(4) | BIT(5); if (!has_vid(config)) sio_data->skip_vid = 1; @@ -2258,31 +2260,31 @@ static int __init it87_find(int sioaddr, unsigned short *address, regef = superio_inb(sioaddr, IT87_SIO_SPI_REG); /* Check if fan3 is there or not */ - if ((reg27 & (1 << 0)) || !(reg2c & (1 << 2))) - sio_data->skip_fan |= (1 << 2); - if ((reg25 & (1 << 4)) - || (!(reg2a & (1 << 1)) && (regef & (1 << 0)))) - sio_data->skip_pwm |= (1 << 2); + if ((reg27 & BIT(0)) || !(reg2c & BIT(2))) + sio_data->skip_fan |= BIT(2); + if ((reg25 & BIT(4)) + || (!(reg2a & BIT(1)) && (regef & BIT(0)))) + sio_data->skip_pwm |= BIT(2); /* Check if fan2 is there or not */ - if (reg27 & (1 << 7)) - sio_data->skip_fan |= (1 << 1); - if (reg27 & (1 << 3)) - sio_data->skip_pwm |= (1 << 1); + if (reg27 & BIT(7)) + sio_data->skip_fan |= BIT(1); + if (reg27 & BIT(3)) + sio_data->skip_pwm |= BIT(1); /* VIN5 */ - if ((reg27 & (1 << 0)) || (reg2c & (1 << 2))) - sio_data->skip_in |= (1 << 5); /* No VIN5 */ + if ((reg27 & BIT(0)) || (reg2c & BIT(2))) + sio_data->skip_in |= BIT(5); /* No VIN5 */ /* VIN6 */ - if (reg27 & (1 << 1)) - sio_data->skip_in |= (1 << 6); /* No VIN6 */ + if (reg27 & BIT(1)) + sio_data->skip_in |= BIT(6); /* No VIN6 */ /* * VIN7 * Does not depend on bit 2 of Reg2C, contrary to datasheet. */ - if (reg27 & (1 << 2)) { + if (reg27 & BIT(2)) { /* * The data sheet is a bit unclear regarding the * internal voltage divider for VCCH5V. It says @@ -2296,8 +2298,8 @@ static int __init it87_find(int sioaddr, unsigned short *address, * not the case, and ask the user to report if the * resulting voltage is sane. */ - if (!(reg2c & (1 << 1))) { - reg2c |= (1 << 1); + if (!(reg2c & BIT(1))) { + reg2c |= BIT(1); superio_outb(sioaddr, IT87_SIO_PINX2_REG, reg2c); pr_notice("Routing internal VCCH5V to in7.\n"); @@ -2306,10 +2308,10 @@ static int __init it87_find(int sioaddr, unsigned short *address, pr_notice("Please report if it displays a reasonable voltage.\n"); } - if (reg2c & (1 << 0)) - sio_data->internal |= (1 << 0); - if (reg2c & (1 << 1)) - sio_data->internal |= (1 << 1); + if (reg2c & BIT(0)) + sio_data->internal |= BIT(0); + if (reg2c & BIT(1)) + sio_data->internal |= BIT(1); sio_data->beep_pin = superio_inb(sioaddr, IT87_SIO_BEEP_PIN_REG) & 0x3f; @@ -2321,20 +2323,20 @@ static int __init it87_find(int sioaddr, unsigned short *address, reg27 = superio_inb(sioaddr, IT87_SIO_GPIO3_REG); /* Check if fan3 is there or not */ - if (reg27 & (1 << 6)) - sio_data->skip_pwm |= (1 << 2); - if (reg27 & (1 << 7)) - sio_data->skip_fan |= (1 << 2); + if (reg27 & BIT(6)) + sio_data->skip_pwm |= BIT(2); + if (reg27 & BIT(7)) + sio_data->skip_fan |= BIT(2); /* Check if fan2 is there or not */ reg29 = superio_inb(sioaddr, IT87_SIO_GPIO5_REG); - if (reg29 & (1 << 1)) - sio_data->skip_pwm |= (1 << 1); - if (reg29 & (1 << 2)) - sio_data->skip_fan |= (1 << 1); + if (reg29 & BIT(1)) + sio_data->skip_pwm |= BIT(1); + if (reg29 & BIT(2)) + sio_data->skip_fan |= BIT(1); - sio_data->skip_in |= (1 << 5); /* No VIN5 */ - sio_data->skip_in |= (1 << 6); /* No VIN6 */ + sio_data->skip_in |= BIT(5); /* No VIN5 */ + sio_data->skip_in |= BIT(6); /* No VIN6 */ sio_data->beep_pin = superio_inb(sioaddr, IT87_SIO_BEEP_PIN_REG) & 0x3f; @@ -2345,38 +2347,38 @@ static int __init it87_find(int sioaddr, unsigned short *address, /* Check for pwm5 */ reg = superio_inb(sioaddr, IT87_SIO_GPIO1_REG); - if (reg & (1 << 6)) - sio_data->skip_pwm |= (1 << 4); + if (reg & BIT(6)) + sio_data->skip_pwm |= BIT(4); /* Check for fan4, fan5 */ reg = superio_inb(sioaddr, IT87_SIO_GPIO2_REG); - if (!(reg & (1 << 5))) - sio_data->skip_fan |= (1 << 3); - if (!(reg & (1 << 4))) - sio_data->skip_fan |= (1 << 4); + if (!(reg & BIT(5))) + sio_data->skip_fan |= BIT(3); + if (!(reg & BIT(4))) + sio_data->skip_fan |= BIT(4); /* Check for pwm3, fan3 */ reg = superio_inb(sioaddr, IT87_SIO_GPIO3_REG); - if (reg & (1 << 6)) - sio_data->skip_pwm |= (1 << 2); - if (reg & (1 << 7)) - sio_data->skip_fan |= (1 << 2); + if (reg & BIT(6)) + sio_data->skip_pwm |= BIT(2); + if (reg & BIT(7)) + sio_data->skip_fan |= BIT(2); /* Check for pwm4 */ reg = superio_inb(sioaddr, IT87_SIO_GPIO4_REG); - if (!(reg & (1 << 2))) - sio_data->skip_pwm |= (1 << 3); + if (!(reg & BIT(2))) + sio_data->skip_pwm |= BIT(3); /* Check for pwm2, fan2 */ reg = superio_inb(sioaddr, IT87_SIO_GPIO5_REG); - if (reg & (1 << 1)) - sio_data->skip_pwm |= (1 << 1); - if (reg & (1 << 2)) - sio_data->skip_fan |= (1 << 1); + if (reg & BIT(1)) + sio_data->skip_pwm |= BIT(1); + if (reg & BIT(2)) + sio_data->skip_fan |= BIT(1); /* Check for pwm6, fan6 */ - if (!(reg & (1 << 7))) { - sio_data->skip_pwm |= (1 << 5); - sio_data->skip_fan |= (1 << 5); + if (!(reg & BIT(7))) { + sio_data->skip_pwm |= BIT(5); + sio_data->skip_fan |= BIT(5); } sio_data->beep_pin = superio_inb(sioaddr, @@ -2397,17 +2399,17 @@ static int __init it87_find(int sioaddr, unsigned short *address, } /* Check if fan3 is there or not */ - if (reg & (1 << 6)) - sio_data->skip_pwm |= (1 << 2); - if (reg & (1 << 7)) - sio_data->skip_fan |= (1 << 2); + if (reg & BIT(6)) + sio_data->skip_pwm |= BIT(2); + if (reg & BIT(7)) + sio_data->skip_fan |= BIT(2); /* Check if fan2 is there or not */ reg = superio_inb(sioaddr, IT87_SIO_GPIO5_REG); - if (reg & (1 << 1)) - sio_data->skip_pwm |= (1 << 1); - if (reg & (1 << 2)) - sio_data->skip_fan |= (1 << 1); + if (reg & BIT(1)) + sio_data->skip_pwm |= BIT(1); + if (reg & BIT(2)) + sio_data->skip_fan |= BIT(1); if ((sio_data->type == it8718 || sio_data->type == it8720) && !(sio_data->skip_vid)) @@ -2416,7 +2418,7 @@ static int __init it87_find(int sioaddr, unsigned short *address, reg = superio_inb(sioaddr, IT87_SIO_PINX2_REG); - uart6 = sio_data->type == it8782 && (reg & (1 << 2)); + uart6 = sio_data->type == it8782 && (reg & BIT(2)); /* * The IT8720F has no VIN7 pin, so VCCH should always be @@ -2432,15 +2434,15 @@ static int __init it87_find(int sioaddr, unsigned short *address, * If UART6 is enabled, re-route VIN7 to the internal divider * if that is not already the case. */ - if ((sio_data->type == it8720 || uart6) && !(reg & (1 << 1))) { - reg |= (1 << 1); + if ((sio_data->type == it8720 || uart6) && !(reg & BIT(1))) { + reg |= BIT(1); superio_outb(sioaddr, IT87_SIO_PINX2_REG, reg); pr_notice("Routing internal VCCH to in7\n"); } - if (reg & (1 << 0)) - sio_data->internal |= (1 << 0); - if (reg & (1 << 1)) - sio_data->internal |= (1 << 1); + if (reg & BIT(0)) + sio_data->internal |= BIT(0); + if (reg & BIT(1)) + sio_data->internal |= BIT(1); /* * On IT8782F, UART6 pins overlap with VIN5, VIN6, and VIN7. @@ -2452,8 +2454,8 @@ static int __init it87_find(int sioaddr, unsigned short *address, * temperature source here, skip_temp is preliminary. */ if (uart6) { - sio_data->skip_in |= (1 << 5) | (1 << 6); - sio_data->skip_temp |= (1 << 2); + sio_data->skip_in |= BIT(5) | BIT(6); + sio_data->skip_temp |= BIT(2); } sio_data->beep_pin = superio_inb(sioaddr, @@ -2477,7 +2479,7 @@ static int __init it87_find(int sioaddr, unsigned short *address, * the same board is ever used in other systems. */ pr_info("Disabling pwm2 due to hardware constraints\n"); - sio_data->skip_pwm = (1 << 1); + sio_data->skip_pwm = BIT(1); } } @@ -2570,12 +2572,12 @@ static void it87_init_device(struct platform_device *pdev) /* Check for additional fans */ if (has_five_fans(data)) { - if (tmp & (1 << 4)) - data->has_fan |= (1 << 3); /* fan4 enabled */ - if (tmp & (1 << 5)) - data->has_fan |= (1 << 4); /* fan5 enabled */ - if (has_six_fans(data) && (tmp & (1 << 2))) - data->has_fan |= (1 << 5); /* fan6 enabled */ + if (tmp & BIT(4)) + data->has_fan |= BIT(3); /* fan4 enabled */ + if (tmp & BIT(5)) + data->has_fan |= BIT(4); /* fan5 enabled */ + if (has_six_fans(data) && (tmp & BIT(2))) + data->has_fan |= BIT(5); /* fan6 enabled */ } /* Fan input pins may be used for alternative functions */ @@ -2586,9 +2588,9 @@ static void it87_init_device(struct platform_device *pdev) /* The following code may be IT8620E specific */ tmp = it87_read_value(data, IT87_REG_FAN_DIV); if ((tmp & 0xc0) == 0xc0) - sio_data->skip_pwm |= (1 << 4); - if (!(tmp & (1 << 3))) - sio_data->skip_pwm |= (1 << 5); + sio_data->skip_pwm |= BIT(4); + if (!(tmp & BIT(3))) + sio_data->skip_pwm |= BIT(5); } /* Start monitoring */ @@ -2719,27 +2721,27 @@ static int it87_probe(struct platform_device *pdev) /* Starting with IT8721F, we handle scaling of internal voltages */ if (has_12mv_adc(data)) { - if (sio_data->internal & (1 << 0)) - data->in_scaled |= (1 << 3); /* in3 is AVCC */ - if (sio_data->internal & (1 << 1)) - data->in_scaled |= (1 << 7); /* in7 is VSB */ - if (sio_data->internal & (1 << 2)) - data->in_scaled |= (1 << 8); /* in8 is Vbat */ - if (sio_data->internal & (1 << 3)) - data->in_scaled |= (1 << 9); /* in9 is AVCC */ + if (sio_data->internal & BIT(0)) + data->in_scaled |= BIT(3); /* in3 is AVCC */ + if (sio_data->internal & BIT(1)) + data->in_scaled |= BIT(7); /* in7 is VSB */ + if (sio_data->internal & BIT(2)) + data->in_scaled |= BIT(8); /* in8 is Vbat */ + if (sio_data->internal & BIT(3)) + data->in_scaled |= BIT(9); /* in9 is AVCC */ } else if (sio_data->type == it8781 || sio_data->type == it8782 || sio_data->type == it8783) { - if (sio_data->internal & (1 << 0)) - data->in_scaled |= (1 << 3); /* in3 is VCC5V */ - if (sio_data->internal & (1 << 1)) - data->in_scaled |= (1 << 7); /* in7 is VCCH5V */ + if (sio_data->internal & BIT(0)) + data->in_scaled |= BIT(3); /* in3 is VCC5V */ + if (sio_data->internal & BIT(1)) + data->in_scaled |= BIT(7); /* in7 is VCCH5V */ } data->has_temp = 0x07; - if (sio_data->skip_temp & (1 << 2)) { + if (sio_data->skip_temp & BIT(2)) { if (sio_data->type == it8782 && !(it87_read_value(data, IT87_REG_TEMP_EXTRA) & 0x80)) - data->has_temp &= ~(1 << 2); + data->has_temp &= ~BIT(2); } data->in_internal = sio_data->internal; @@ -2750,19 +2752,19 @@ static int it87_probe(struct platform_device *pdev) /* Check for additional temperature sensors */ if ((reg & 0x03) >= 0x02) - data->has_temp |= (1 << 3); + data->has_temp |= BIT(3); if (((reg >> 2) & 0x03) >= 0x02) - data->has_temp |= (1 << 4); + data->has_temp |= BIT(4); if (((reg >> 4) & 0x03) >= 0x02) - data->has_temp |= (1 << 5); + data->has_temp |= BIT(5); /* Check for additional voltage sensors */ if ((reg & 0x03) == 0x01) - data->has_in |= (1 << 10); + data->has_in |= BIT(10); if (((reg >> 2) & 0x03) == 0x01) - data->has_in |= (1 << 11); + data->has_in |= BIT(11); if (((reg >> 4) & 0x03) == 0x01) - data->has_in |= (1 << 12); + data->has_in |= BIT(12); } data->has_beep = !!sio_data->beep_pin; @@ -2784,7 +2786,7 @@ static int it87_probe(struct platform_device *pdev) data->groups[3] = &it87_group_fan; if (enable_pwm_interface) { - data->has_pwm = (1 << ARRAY_SIZE(IT87_REG_PWM)) - 1; + data->has_pwm = BIT(ARRAY_SIZE(IT87_REG_PWM)) - 1; data->has_pwm &= ~sio_data->skip_pwm; data->groups[4] = &it87_group_pwm; -- cgit v1.2.3