From 2bfba3c444fe8b2ab1c38112a89d8f03b61136ca Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 21 Oct 2008 20:57:23 +0200 Subject: ide: remove useless subdirs from drivers/ide/ Suggested-by: Ralf Baechle Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/amd74xx.c | 346 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 346 insertions(+) create mode 100644 drivers/ide/amd74xx.c (limited to 'drivers/ide/amd74xx.c') diff --git a/drivers/ide/amd74xx.c b/drivers/ide/amd74xx.c new file mode 100644 index 000000000000..81ec73134eda --- /dev/null +++ b/drivers/ide/amd74xx.c @@ -0,0 +1,346 @@ +/* + * AMD 755/756/766/8111 and nVidia nForce/2/2s/3/3s/CK804/MCP04 + * IDE driver for Linux. + * + * Copyright (c) 2000-2002 Vojtech Pavlik + * Copyright (c) 2007 Bartlomiej Zolnierkiewicz + * + * Based on the work of: + * Andre Hedrick + */ + +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +#include +#include +#include +#include +#include + +#define DRV_NAME "amd74xx" + +enum { + AMD_IDE_CONFIG = 0x41, + AMD_CABLE_DETECT = 0x42, + AMD_DRIVE_TIMING = 0x48, + AMD_8BIT_TIMING = 0x4e, + AMD_ADDRESS_SETUP = 0x4c, + AMD_UDMA_TIMING = 0x50, +}; + +static unsigned int amd_80w; +static unsigned int amd_clock; + +static char *amd_dma[] = { "16", "25", "33", "44", "66", "100", "133" }; +static unsigned char amd_cyc2udma[] = { 6, 6, 5, 4, 0, 1, 1, 2, 2, 3, 3, 3, 3, 3, 3, 7 }; + +static inline u8 amd_offset(struct pci_dev *dev) +{ + return (dev->vendor == PCI_VENDOR_ID_NVIDIA) ? 0x10 : 0; +} + +/* + * amd_set_speed() writes timing values to the chipset registers + */ + +static void amd_set_speed(struct pci_dev *dev, u8 dn, u8 udma_mask, + struct ide_timing *timing) +{ + u8 t = 0, offset = amd_offset(dev); + + pci_read_config_byte(dev, AMD_ADDRESS_SETUP + offset, &t); + t = (t & ~(3 << ((3 - dn) << 1))) | ((clamp_val(timing->setup, 1, 4) - 1) << ((3 - dn) << 1)); + pci_write_config_byte(dev, AMD_ADDRESS_SETUP + offset, t); + + pci_write_config_byte(dev, AMD_8BIT_TIMING + offset + (1 - (dn >> 1)), + ((clamp_val(timing->act8b, 1, 16) - 1) << 4) | (clamp_val(timing->rec8b, 1, 16) - 1)); + + pci_write_config_byte(dev, AMD_DRIVE_TIMING + offset + (3 - dn), + ((clamp_val(timing->active, 1, 16) - 1) << 4) | (clamp_val(timing->recover, 1, 16) - 1)); + + switch (udma_mask) { + case ATA_UDMA2: t = timing->udma ? (0xc0 | (clamp_val(timing->udma, 2, 5) - 2)) : 0x03; break; + case ATA_UDMA4: t = timing->udma ? (0xc0 | amd_cyc2udma[clamp_val(timing->udma, 2, 10)]) : 0x03; break; + case ATA_UDMA5: t = timing->udma ? (0xc0 | amd_cyc2udma[clamp_val(timing->udma, 1, 10)]) : 0x03; break; + case ATA_UDMA6: t = timing->udma ? (0xc0 | amd_cyc2udma[clamp_val(timing->udma, 1, 15)]) : 0x03; break; + default: return; + } + + pci_write_config_byte(dev, AMD_UDMA_TIMING + offset + (3 - dn), t); +} + +/* + * amd_set_drive() computes timing values and configures the chipset + * to a desired transfer mode. It also can be called by upper layers. + */ + +static void amd_set_drive(ide_drive_t *drive, const u8 speed) +{ + ide_hwif_t *hwif = drive->hwif; + struct pci_dev *dev = to_pci_dev(hwif->dev); + ide_drive_t *peer = hwif->drives + (~drive->dn & 1); + struct ide_timing t, p; + int T, UT; + u8 udma_mask = hwif->ultra_mask; + + T = 1000000000 / amd_clock; + UT = (udma_mask == ATA_UDMA2) ? T : (T / 2); + + ide_timing_compute(drive, speed, &t, T, UT); + + if (peer->dev_flags & IDE_DFLAG_PRESENT) { + ide_timing_compute(peer, peer->current_speed, &p, T, UT); + ide_timing_merge(&p, &t, &t, IDE_TIMING_8BIT); + } + + if (speed == XFER_UDMA_5 && amd_clock <= 33333) t.udma = 1; + if (speed == XFER_UDMA_6 && amd_clock <= 33333) t.udma = 15; + + amd_set_speed(dev, drive->dn, udma_mask, &t); +} + +/* + * amd_set_pio_mode() is a callback from upper layers for PIO-only tuning. + */ + +static void amd_set_pio_mode(ide_drive_t *drive, const u8 pio) +{ + amd_set_drive(drive, XFER_PIO_0 + pio); +} + +static void amd7409_cable_detect(struct pci_dev *dev) +{ + /* no host side cable detection */ + amd_80w = 0x03; +} + +static void amd7411_cable_detect(struct pci_dev *dev) +{ + int i; + u32 u = 0; + u8 t = 0, offset = amd_offset(dev); + + pci_read_config_byte(dev, AMD_CABLE_DETECT + offset, &t); + pci_read_config_dword(dev, AMD_UDMA_TIMING + offset, &u); + amd_80w = ((t & 0x3) ? 1 : 0) | ((t & 0xc) ? 2 : 0); + for (i = 24; i >= 0; i -= 8) + if (((u >> i) & 4) && !(amd_80w & (1 << (1 - (i >> 4))))) { + printk(KERN_WARNING DRV_NAME " %s: BIOS didn't set " + "cable bits correctly. Enabling workaround.\n", + pci_name(dev)); + amd_80w |= (1 << (1 - (i >> 4))); + } +} + +/* + * The initialization callback. Initialize drive independent registers. + */ + +static unsigned int init_chipset_amd74xx(struct pci_dev *dev) +{ + u8 t = 0, offset = amd_offset(dev); + +/* + * Check 80-wire cable presence. + */ + + if (dev->vendor == PCI_VENDOR_ID_AMD && + dev->device == PCI_DEVICE_ID_AMD_COBRA_7401) + ; /* no UDMA > 2 */ + else if (dev->vendor == PCI_VENDOR_ID_AMD && + dev->device == PCI_DEVICE_ID_AMD_VIPER_7409) + amd7409_cable_detect(dev); + else + amd7411_cable_detect(dev); + +/* + * Take care of prefetch & postwrite. + */ + + pci_read_config_byte(dev, AMD_IDE_CONFIG + offset, &t); + /* + * Check for broken FIFO support. + */ + if (dev->vendor == PCI_VENDOR_ID_AMD && + dev->vendor == PCI_DEVICE_ID_AMD_VIPER_7411) + t &= 0x0f; + else + t |= 0xf0; + pci_write_config_byte(dev, AMD_IDE_CONFIG + offset, t); + + return dev->irq; +} + +static u8 amd_cable_detect(ide_hwif_t *hwif) +{ + if ((amd_80w >> hwif->channel) & 1) + return ATA_CBL_PATA80; + else + return ATA_CBL_PATA40; +} + +static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif) +{ + struct pci_dev *dev = to_pci_dev(hwif->dev); + + if (hwif->irq == 0) /* 0 is bogus but will do for now */ + hwif->irq = pci_get_legacy_ide_irq(dev, hwif->channel); +} + +static const struct ide_port_ops amd_port_ops = { + .set_pio_mode = amd_set_pio_mode, + .set_dma_mode = amd_set_drive, + .cable_detect = amd_cable_detect, +}; + +#define IDE_HFLAGS_AMD \ + (IDE_HFLAG_PIO_NO_BLACKLIST | \ + IDE_HFLAG_POST_SET_MODE | \ + IDE_HFLAG_IO_32BIT | \ + IDE_HFLAG_UNMASK_IRQS) + +#define DECLARE_AMD_DEV(swdma, udma) \ + { \ + .name = DRV_NAME, \ + .init_chipset = init_chipset_amd74xx, \ + .init_hwif = init_hwif_amd74xx, \ + .enablebits = {{0x40,0x02,0x02}, {0x40,0x01,0x01}}, \ + .port_ops = &amd_port_ops, \ + .host_flags = IDE_HFLAGS_AMD, \ + .pio_mask = ATA_PIO5, \ + .swdma_mask = swdma, \ + .mwdma_mask = ATA_MWDMA2, \ + .udma_mask = udma, \ + } + +#define DECLARE_NV_DEV(udma) \ + { \ + .name = DRV_NAME, \ + .init_chipset = init_chipset_amd74xx, \ + .init_hwif = init_hwif_amd74xx, \ + .enablebits = {{0x50,0x02,0x02}, {0x50,0x01,0x01}}, \ + .port_ops = &amd_port_ops, \ + .host_flags = IDE_HFLAGS_AMD, \ + .pio_mask = ATA_PIO5, \ + .swdma_mask = ATA_SWDMA2, \ + .mwdma_mask = ATA_MWDMA2, \ + .udma_mask = udma, \ + } + +static const struct ide_port_info amd74xx_chipsets[] __devinitdata = { + /* 0: AMD7401 */ DECLARE_AMD_DEV(0x00, ATA_UDMA2), + /* 1: AMD7409 */ DECLARE_AMD_DEV(ATA_SWDMA2, ATA_UDMA4), + /* 2: AMD7411/7441 */ DECLARE_AMD_DEV(ATA_SWDMA2, ATA_UDMA5), + /* 3: AMD8111 */ DECLARE_AMD_DEV(ATA_SWDMA2, ATA_UDMA6), + + /* 4: NFORCE */ DECLARE_NV_DEV(ATA_UDMA5), + /* 5: >= NFORCE2 */ DECLARE_NV_DEV(ATA_UDMA6), + + /* 6: AMD5536 */ DECLARE_AMD_DEV(ATA_SWDMA2, ATA_UDMA5), +}; + +static int __devinit amd74xx_probe(struct pci_dev *dev, const struct pci_device_id *id) +{ + struct ide_port_info d; + u8 idx = id->driver_data; + + d = amd74xx_chipsets[idx]; + + /* + * Check for bad SWDMA and incorrectly wired Serenade mainboards. + */ + if (idx == 1) { + if (dev->revision <= 7) + d.swdma_mask = 0; + d.host_flags |= IDE_HFLAG_CLEAR_SIMPLEX; + } else if (idx == 3) { + if (dev->subsystem_vendor == PCI_VENDOR_ID_AMD && + dev->subsystem_device == PCI_DEVICE_ID_AMD_SERENADE) + d.udma_mask = ATA_UDMA5; + } + + printk(KERN_INFO "%s %s: UDMA%s controller\n", + d.name, pci_name(dev), amd_dma[fls(d.udma_mask) - 1]); + + /* + * Determine the system bus clock. + */ + amd_clock = (ide_pci_clk ? ide_pci_clk : 33) * 1000; + + switch (amd_clock) { + case 33000: amd_clock = 33333; break; + case 37000: amd_clock = 37500; break; + case 41000: amd_clock = 41666; break; + } + + if (amd_clock < 20000 || amd_clock > 50000) { + printk(KERN_WARNING "%s: User given PCI clock speed impossible" + " (%d), using 33 MHz instead.\n", + d.name, amd_clock); + amd_clock = 33333; + } + + return ide_pci_init_one(dev, &d, NULL); +} + +static const struct pci_device_id amd74xx_pci_tbl[] = { + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_COBRA_7401), 0 }, + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_VIPER_7409), 1 }, + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_VIPER_7411), 2 }, + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_OPUS_7441), 2 }, + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_8111_IDE), 3 }, + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_IDE), 4 }, + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE), 5 }, + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2S_IDE), 5 }, +#ifdef CONFIG_BLK_DEV_IDE_SATA + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA), 5 }, +#endif + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE), 5 }, + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_IDE), 5 }, +#ifdef CONFIG_BLK_DEV_IDE_SATA + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA), 5 }, + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2), 5 }, +#endif + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE), 5 }, + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE), 5 }, + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE), 5 }, + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE), 5 }, + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE), 5 }, + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_IDE), 5 }, + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE), 5 }, + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_IDE), 5 }, + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP77_IDE), 5 }, + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5536_IDE), 6 }, + { 0, }, +}; +MODULE_DEVICE_TABLE(pci, amd74xx_pci_tbl); + +static struct pci_driver amd74xx_pci_driver = { + .name = "AMD_IDE", + .id_table = amd74xx_pci_tbl, + .probe = amd74xx_probe, + .remove = ide_pci_remove, + .suspend = ide_pci_suspend, + .resume = ide_pci_resume, +}; + +static int __init amd74xx_ide_init(void) +{ + return ide_pci_register_driver(&amd74xx_pci_driver); +} + +static void __exit amd74xx_ide_exit(void) +{ + pci_unregister_driver(&amd74xx_pci_driver); +} + +module_init(amd74xx_ide_init); +module_exit(amd74xx_ide_exit); + +MODULE_AUTHOR("Vojtech Pavlik"); +MODULE_DESCRIPTION("AMD PCI IDE driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3