From 2bfba3c444fe8b2ab1c38112a89d8f03b61136ca Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 21 Oct 2008 20:57:23 +0200 Subject: ide: remove useless subdirs from drivers/ide/ Suggested-by: Ralf Baechle Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/rz1000.c | 85 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 85 insertions(+) create mode 100644 drivers/ide/rz1000.c (limited to 'drivers/ide/rz1000.c') diff --git a/drivers/ide/rz1000.c b/drivers/ide/rz1000.c new file mode 100644 index 000000000000..7daf0135cbac --- /dev/null +++ b/drivers/ide/rz1000.c @@ -0,0 +1,85 @@ +/* + * Copyright (C) 1995-1998 Linus Torvalds & author (see below) + */ + +/* + * Principal Author: mlord@pobox.com (Mark Lord) + * + * See linux/MAINTAINERS for address of current maintainer. + * + * This file provides support for disabling the buggy read-ahead + * mode of the RZ1000 IDE chipset, commonly used on Intel motherboards. + * + * Dunno if this fixes both ports, or only the primary port (?). + */ + +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "rz1000" + +static void __devinit init_hwif_rz1000 (ide_hwif_t *hwif) +{ + struct pci_dev *dev = to_pci_dev(hwif->dev); + u16 reg; + + if (!pci_read_config_word (dev, 0x40, ®) && + !pci_write_config_word(dev, 0x40, reg & 0xdfff)) { + printk(KERN_INFO "%s: disabled chipset read-ahead " + "(buggy RZ1000/RZ1001)\n", hwif->name); + } else { + if (hwif->mate) + hwif->mate->serialized = hwif->serialized = 1; + hwif->host_flags |= IDE_HFLAG_NO_UNMASK_IRQS; + printk(KERN_INFO "%s: serialized, disabled unmasking " + "(buggy RZ1000/RZ1001)\n", hwif->name); + } +} + +static const struct ide_port_info rz1000_chipset __devinitdata = { + .name = DRV_NAME, + .init_hwif = init_hwif_rz1000, + .chipset = ide_rz1000, + .host_flags = IDE_HFLAG_NO_DMA, +}; + +static int __devinit rz1000_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + return ide_pci_init_one(dev, &rz1000_chipset, NULL); +} + +static const struct pci_device_id rz1000_pci_tbl[] = { + { PCI_VDEVICE(PCTECH, PCI_DEVICE_ID_PCTECH_RZ1000), 0 }, + { PCI_VDEVICE(PCTECH, PCI_DEVICE_ID_PCTECH_RZ1001), 0 }, + { 0, }, +}; +MODULE_DEVICE_TABLE(pci, rz1000_pci_tbl); + +static struct pci_driver rz1000_pci_driver = { + .name = "RZ1000_IDE", + .id_table = rz1000_pci_tbl, + .probe = rz1000_init_one, + .remove = ide_pci_remove, +}; + +static int __init rz1000_ide_init(void) +{ + return ide_pci_register_driver(&rz1000_pci_driver); +} + +static void __exit rz1000_ide_exit(void) +{ + pci_unregister_driver(&rz1000_pci_driver); +} + +module_init(rz1000_ide_init); +module_exit(rz1000_ide_exit); + +MODULE_AUTHOR("Andre Hedrick"); +MODULE_DESCRIPTION("PCI driver module for RZ1000 IDE"); +MODULE_LICENSE("GPL"); + -- cgit v1.2.3