From fafef982c7353e8982b951e40573e990ccf0ed00 Mon Sep 17 00:00:00 2001 From: Marcin Niestroj Date: Fri, 26 Jan 2018 11:08:59 -0800 Subject: Input: goodix - use generic touchscreen_properties Use touchscreen_properties structure instead of implementing all properties by our own. It allows us to reuse generic code for parsing device-tree properties (which was implemented manually in the driver for now). Additionally, it allows us to report events using generic touchscreen_report_pos(), which automatically handles inverted and swapped axes. This fixes the issue with the custom code incorrectly handling case where ts->inverted_x and ts->swapped_x_y were true, but ts->inverted_y was false. Assuming we have 720x1280 touch panel, ts->abs_x_max == 1279 and ts->abs_y_max == 719 (because we inverted that in goodix_read_config()). Now let's assume that we received event from (0:0) position (in touch panel original coordinates). In function goodix_ts_report_touch() we calculate input_x as 1279, but after swapping input_y takes that value (which is more that maximum 719 value reported during initialization). Note that since touchscreen coordinates are 0-indexed, we now report touchscreen range as (0:size-1). Developed and tested on custom DT-based device with gt1151 touch panel. Signed-off-by: Marcin Niestroj [dtor: fix endianness annotation reported by sparse, handle errors when initializing MT slots] Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/goodix.c | 141 +++++++++++++++---------------------- 1 file changed, 58 insertions(+), 83 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c index ecec8eb17f28..9736c83dd418 100644 --- a/drivers/input/touchscreen/goodix.c +++ b/drivers/input/touchscreen/goodix.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include @@ -43,11 +44,7 @@ struct goodix_ts_data { struct i2c_client *client; struct input_dev *input_dev; const struct goodix_chip_data *chip; - int abs_x_max; - int abs_y_max; - bool swapped_x_y; - bool inverted_x; - bool inverted_y; + struct touchscreen_properties prop; unsigned int max_touch_num; unsigned int int_trigger_type; struct gpio_desc *gpiod_int; @@ -160,7 +157,7 @@ static int goodix_i2c_read(struct i2c_client *client, u16 reg, u8 *buf, int len) { struct i2c_msg msgs[2]; - u16 wbuf = cpu_to_be16(reg); + __be16 wbuf = cpu_to_be16(reg); int ret; msgs[0].flags = 0; @@ -295,18 +292,10 @@ static void goodix_ts_report_touch(struct goodix_ts_data *ts, u8 *coor_data) int input_y = get_unaligned_le16(&coor_data[3]); int input_w = get_unaligned_le16(&coor_data[5]); - /* Inversions have to happen before axis swapping */ - if (ts->inverted_x) - input_x = ts->abs_x_max - input_x; - if (ts->inverted_y) - input_y = ts->abs_y_max - input_y; - if (ts->swapped_x_y) - swap(input_x, input_y); - input_mt_slot(ts->input_dev, id); input_mt_report_slot_state(ts->input_dev, MT_TOOL_FINGER, true); - input_report_abs(ts->input_dev, ABS_MT_POSITION_X, input_x); - input_report_abs(ts->input_dev, ABS_MT_POSITION_Y, input_y); + touchscreen_report_pos(ts->input_dev, &ts->prop, + input_x, input_y, true); input_report_abs(ts->input_dev, ABS_MT_TOUCH_MAJOR, input_w); input_report_abs(ts->input_dev, ABS_MT_WIDTH_MAJOR, input_w); } @@ -579,44 +568,27 @@ static int goodix_get_gpio_config(struct goodix_ts_data *ts) static void goodix_read_config(struct goodix_ts_data *ts) { u8 config[GOODIX_CONFIG_MAX_LENGTH]; + int x_max, y_max; int error; error = goodix_i2c_read(ts->client, ts->chip->config_addr, config, ts->chip->config_len); if (error) { - dev_warn(&ts->client->dev, - "Error reading config (%d), using defaults\n", + dev_warn(&ts->client->dev, "Error reading config: %d\n", error); - ts->abs_x_max = GOODIX_MAX_WIDTH; - ts->abs_y_max = GOODIX_MAX_HEIGHT; - if (ts->swapped_x_y) - swap(ts->abs_x_max, ts->abs_y_max); ts->int_trigger_type = GOODIX_INT_TRIGGER; ts->max_touch_num = GOODIX_MAX_CONTACTS; return; } - ts->abs_x_max = get_unaligned_le16(&config[RESOLUTION_LOC]); - ts->abs_y_max = get_unaligned_le16(&config[RESOLUTION_LOC + 2]); - if (ts->swapped_x_y) - swap(ts->abs_x_max, ts->abs_y_max); ts->int_trigger_type = config[TRIGGER_LOC] & 0x03; ts->max_touch_num = config[MAX_CONTACTS_LOC] & 0x0f; - if (!ts->abs_x_max || !ts->abs_y_max || !ts->max_touch_num) { - dev_err(&ts->client->dev, - "Invalid config, using defaults\n"); - ts->abs_x_max = GOODIX_MAX_WIDTH; - ts->abs_y_max = GOODIX_MAX_HEIGHT; - if (ts->swapped_x_y) - swap(ts->abs_x_max, ts->abs_y_max); - ts->max_touch_num = GOODIX_MAX_CONTACTS; - } - if (dmi_check_system(rotated_screen)) { - ts->inverted_x = true; - ts->inverted_y = true; - dev_dbg(&ts->client->dev, - "Applying '180 degrees rotated screen' quirk\n"); + x_max = get_unaligned_le16(&config[RESOLUTION_LOC]); + y_max = get_unaligned_le16(&config[RESOLUTION_LOC + 2]); + if (x_max && y_max) { + input_abs_set_max(ts->input_dev, ABS_MT_POSITION_X, x_max - 1); + input_abs_set_max(ts->input_dev, ABS_MT_POSITION_Y, y_max - 1); } } @@ -676,32 +648,28 @@ static int goodix_i2c_test(struct i2c_client *client) } /** - * goodix_request_input_dev - Allocate, populate and register the input device + * goodix_configure_dev - Finish device initialization * * @ts: our goodix_ts_data pointer * - * Must be called during probe + * Must be called from probe to finish initialization of the device. + * Contains the common initialization code for both devices that + * declare gpio pins and devices that do not. It is either called + * directly from probe or from request_firmware_wait callback. */ -static int goodix_request_input_dev(struct goodix_ts_data *ts) +static int goodix_configure_dev(struct goodix_ts_data *ts) { int error; + ts->int_trigger_type = GOODIX_INT_TRIGGER; + ts->max_touch_num = GOODIX_MAX_CONTACTS; + ts->input_dev = devm_input_allocate_device(&ts->client->dev); if (!ts->input_dev) { dev_err(&ts->client->dev, "Failed to allocate input device."); return -ENOMEM; } - input_set_abs_params(ts->input_dev, ABS_MT_POSITION_X, - 0, ts->abs_x_max, 0, 0); - input_set_abs_params(ts->input_dev, ABS_MT_POSITION_Y, - 0, ts->abs_y_max, 0, 0); - input_set_abs_params(ts->input_dev, ABS_MT_WIDTH_MAJOR, 0, 255, 0, 0); - input_set_abs_params(ts->input_dev, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0); - - input_mt_init_slots(ts->input_dev, ts->max_touch_num, - INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED); - ts->input_dev->name = "Goodix Capacitive TouchScreen"; ts->input_dev->phys = "input/ts"; ts->input_dev->id.bustype = BUS_I2C; @@ -712,42 +680,49 @@ static int goodix_request_input_dev(struct goodix_ts_data *ts) /* Capacitive Windows/Home button on some devices */ input_set_capability(ts->input_dev, EV_KEY, KEY_LEFTMETA); - error = input_register_device(ts->input_dev); - if (error) { - dev_err(&ts->client->dev, - "Failed to register input device: %d", error); - return error; - } + input_set_capability(ts->input_dev, EV_ABS, ABS_MT_POSITION_X); + input_set_capability(ts->input_dev, EV_ABS, ABS_MT_POSITION_Y); + input_set_abs_params(ts->input_dev, ABS_MT_WIDTH_MAJOR, 0, 255, 0, 0); + input_set_abs_params(ts->input_dev, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0); - return 0; -} + /* Read configuration and apply touchscreen parameters */ + goodix_read_config(ts); -/** - * goodix_configure_dev - Finish device initialization - * - * @ts: our goodix_ts_data pointer - * - * Must be called from probe to finish initialization of the device. - * Contains the common initialization code for both devices that - * declare gpio pins and devices that do not. It is either called - * directly from probe or from request_firmware_wait callback. - */ -static int goodix_configure_dev(struct goodix_ts_data *ts) -{ - int error; + /* Try overriding touchscreen parameters via device properties */ + touchscreen_parse_properties(ts->input_dev, true, &ts->prop); - ts->swapped_x_y = device_property_read_bool(&ts->client->dev, - "touchscreen-swapped-x-y"); - ts->inverted_x = device_property_read_bool(&ts->client->dev, - "touchscreen-inverted-x"); - ts->inverted_y = device_property_read_bool(&ts->client->dev, - "touchscreen-inverted-y"); + if (!ts->prop.max_x || !ts->prop.max_y || !ts->max_touch_num) { + dev_err(&ts->client->dev, "Invalid config, using defaults\n"); + ts->prop.max_x = GOODIX_MAX_WIDTH - 1; + ts->prop.max_y = GOODIX_MAX_HEIGHT - 1; + ts->max_touch_num = GOODIX_MAX_CONTACTS; + input_abs_set_max(ts->input_dev, + ABS_MT_POSITION_X, ts->prop.max_x); + input_abs_set_max(ts->input_dev, + ABS_MT_POSITION_Y, ts->prop.max_y); + } - goodix_read_config(ts); + if (dmi_check_system(rotated_screen)) { + ts->prop.invert_x = true; + ts->prop.invert_y = true; + dev_dbg(&ts->client->dev, + "Applying '180 degrees rotated screen' quirk\n"); + } - error = goodix_request_input_dev(ts); - if (error) + error = input_mt_init_slots(ts->input_dev, ts->max_touch_num, + INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED); + if (error) { + dev_err(&ts->client->dev, + "Failed to initialize MT slots: %d", error); + return error; + } + + error = input_register_device(ts->input_dev); + if (error) { + dev_err(&ts->client->dev, + "Failed to register input device: %d", error); return error; + } ts->irq_flags = goodix_irq_flags[ts->int_trigger_type] | IRQF_ONESHOT; error = goodix_request_irq(ts); -- cgit v1.2.3