From 9db3cf1ccd5f78ad5c2a01a2fd5c5774d0ed0f6f Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 6 Feb 2017 15:38:07 +0100 Subject: misc: panel: Move all suboptions into a big if section All 18 suboptions related to the panel driver have individual dependencies on PANEL. Replace them by a single "if PANEL / endif # PANEL" section for easier dependency management. Signed-off-by: Geert Uytterhoeven Signed-off-by: Greg Kroah-Hartman --- drivers/misc/Kconfig | 37 +++++++++++++++++++------------------ 1 file changed, 19 insertions(+), 18 deletions(-) (limited to 'drivers/misc') diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 2687ecf3e9e6..c290990d73ed 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -503,9 +503,10 @@ config PANEL compiled as a module, or linked into the kernel and started at boot. If you don't understand what all this is about, say N. +if PANEL + config PANEL_PARPORT int "Default parallel port number (0=LPT1)" - depends on PANEL range 0 255 default "0" ---help--- @@ -517,7 +518,6 @@ config PANEL_PARPORT config PANEL_PROFILE int "Default panel profile (0-5, 0=custom)" - depends on PANEL range 0 5 default "5" ---help--- @@ -538,7 +538,7 @@ config PANEL_PROFILE for experts. config PANEL_KEYPAD - depends on PANEL && PANEL_PROFILE="0" + depends on PANEL_PROFILE="0" int "Keypad type (0=none, 1=old 6 keys, 2=new 6 keys, 3=Nexcom 4 keys)" range 0 3 default 0 @@ -555,7 +555,7 @@ config PANEL_KEYPAD supports simultaneous keys pressed when the keypad supports them. config PANEL_LCD - depends on PANEL && PANEL_PROFILE="0" + depends on PANEL_PROFILE="0" int "LCD type (0=none, 1=custom, 2=old //, 3=ks0074, 4=hantronix, 5=Nexcom)" range 0 5 default 0 @@ -578,7 +578,7 @@ config PANEL_LCD that those values changed from the 2.4 driver for better consistency. config PANEL_LCD_HEIGHT - depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" + depends on PANEL_PROFILE="0" && PANEL_LCD="1" int "Number of lines on the LCD (1-2)" range 1 2 default 2 @@ -587,7 +587,7 @@ config PANEL_LCD_HEIGHT It can either be 1 or 2. config PANEL_LCD_WIDTH - depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" + depends on PANEL_PROFILE="0" && PANEL_LCD="1" int "Number of characters per line on the LCD (1-40)" range 1 40 default 40 @@ -596,7 +596,7 @@ config PANEL_LCD_WIDTH Common values are 16,20,24,40. config PANEL_LCD_BWIDTH - depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" + depends on PANEL_PROFILE="0" && PANEL_LCD="1" int "Internal LCD line width (1-40, 40 by default)" range 1 40 default 40 @@ -612,7 +612,7 @@ config PANEL_LCD_BWIDTH If you don't know, put '40' here. config PANEL_LCD_HWIDTH - depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" + depends on PANEL_PROFILE="0" && PANEL_LCD="1" int "Hardware LCD line width (1-64, 64 by default)" range 1 64 default 64 @@ -626,7 +626,7 @@ config PANEL_LCD_HWIDTH 64 here for a 2x40. config PANEL_LCD_CHARSET - depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" + depends on PANEL_PROFILE="0" && PANEL_LCD="1" int "LCD character set (0=normal, 1=KS0074)" range 0 1 default 0 @@ -642,7 +642,7 @@ config PANEL_LCD_CHARSET If you don't know, use the normal one (0). config PANEL_LCD_PROTO - depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" + depends on PANEL_PROFILE="0" && PANEL_LCD="1" int "LCD communication mode (0=parallel 8 bits, 1=serial)" range 0 1 default 0 @@ -655,7 +655,7 @@ config PANEL_LCD_PROTO parallel LCD, and 1 for a serial LCD. config PANEL_LCD_PIN_E - depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO="0" + depends on PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO="0" int "Parallel port pin number & polarity connected to the LCD E signal (-17...17) " range -17 17 default 14 @@ -670,7 +670,7 @@ config PANEL_LCD_PIN_E Default for the 'E' pin in custom profile is '14' (AUTOFEED). config PANEL_LCD_PIN_RS - depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO="0" + depends on PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO="0" int "Parallel port pin number & polarity connected to the LCD RS signal (-17...17) " range -17 17 default 17 @@ -685,7 +685,7 @@ config PANEL_LCD_PIN_RS Default for the 'RS' pin in custom profile is '17' (SELECT IN). config PANEL_LCD_PIN_RW - depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO="0" + depends on PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO="0" int "Parallel port pin number & polarity connected to the LCD RW signal (-17...17) " range -17 17 default 16 @@ -700,7 +700,7 @@ config PANEL_LCD_PIN_RW Default for the 'RW' pin in custom profile is '16' (INIT). config PANEL_LCD_PIN_SCL - depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO!="0" + depends on PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO!="0" int "Parallel port pin number & polarity connected to the LCD SCL signal (-17...17) " range -17 17 default 1 @@ -715,7 +715,7 @@ config PANEL_LCD_PIN_SCL Default for the 'SCL' pin in custom profile is '1' (STROBE). config PANEL_LCD_PIN_SDA - depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO!="0" + depends on PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO!="0" int "Parallel port pin number & polarity connected to the LCD SDA signal (-17...17) " range -17 17 default 2 @@ -730,7 +730,7 @@ config PANEL_LCD_PIN_SDA Default for the 'SDA' pin in custom profile is '2' (D0). config PANEL_LCD_PIN_BL - depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" + depends on PANEL_PROFILE="0" && PANEL_LCD="1" int "Parallel port pin number & polarity connected to the LCD backlight signal (-17...17) " range -17 17 default 0 @@ -745,7 +745,6 @@ config PANEL_LCD_PIN_BL Default for the 'BL' pin in custom profile is '0' (uncontrolled). config PANEL_CHANGE_MESSAGE - depends on PANEL bool "Change LCD initialization message ?" default "n" ---help--- @@ -758,7 +757,7 @@ config PANEL_CHANGE_MESSAGE say 'N' and keep the default message with the version. config PANEL_BOOT_MESSAGE - depends on PANEL && PANEL_CHANGE_MESSAGE="y" + depends on PANEL_CHANGE_MESSAGE="y" string "New initialization message" default "" ---help--- @@ -770,6 +769,8 @@ config PANEL_BOOT_MESSAGE An empty message will only clear the display at driver init time. Any other printf()-formatted message is valid with newline and escape codes. +endif # PANEL + source "drivers/misc/c2port/Kconfig" source "drivers/misc/eeprom/Kconfig" source "drivers/misc/cb710/Kconfig" -- cgit v1.2.3