From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/mtd/chips/cfi_cmdset_0020.c | 1418 +++++++++++++++++++++++++++++++++++ 1 file changed, 1418 insertions(+) create mode 100644 drivers/mtd/chips/cfi_cmdset_0020.c (limited to 'drivers/mtd/chips/cfi_cmdset_0020.c') diff --git a/drivers/mtd/chips/cfi_cmdset_0020.c b/drivers/mtd/chips/cfi_cmdset_0020.c new file mode 100644 index 000000000000..8c24e18db3b4 --- /dev/null +++ b/drivers/mtd/chips/cfi_cmdset_0020.c @@ -0,0 +1,1418 @@ +/* + * Common Flash Interface support: + * ST Advanced Architecture Command Set (ID 0x0020) + * + * (C) 2000 Red Hat. GPL'd + * + * $Id: cfi_cmdset_0020.c,v 1.17 2004/11/20 12:49:04 dwmw2 Exp $ + * + * 10/10/2000 Nicolas Pitre + * - completely revamped method functions so they are aware and + * independent of the flash geometry (buswidth, interleave, etc.) + * - scalability vs code size is completely set at compile-time + * (see include/linux/mtd/cfi.h for selection) + * - optimized write buffer method + * 06/21/2002 Joern Engel and others + * - modified Intel Command Set 0x0001 to support ST Advanced Architecture + * (command set 0x0020) + * - added a writev function + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + + +static int cfi_staa_read(struct mtd_info *, loff_t, size_t, size_t *, u_char *); +static int cfi_staa_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); +static int cfi_staa_writev(struct mtd_info *mtd, const struct kvec *vecs, + unsigned long count, loff_t to, size_t *retlen); +static int cfi_staa_erase_varsize(struct mtd_info *, struct erase_info *); +static void cfi_staa_sync (struct mtd_info *); +static int cfi_staa_lock(struct mtd_info *mtd, loff_t ofs, size_t len); +static int cfi_staa_unlock(struct mtd_info *mtd, loff_t ofs, size_t len); +static int cfi_staa_suspend (struct mtd_info *); +static void cfi_staa_resume (struct mtd_info *); + +static void cfi_staa_destroy(struct mtd_info *); + +struct mtd_info *cfi_cmdset_0020(struct map_info *, int); + +static struct mtd_info *cfi_staa_setup (struct map_info *); + +static struct mtd_chip_driver cfi_staa_chipdrv = { + .probe = NULL, /* Not usable directly */ + .destroy = cfi_staa_destroy, + .name = "cfi_cmdset_0020", + .module = THIS_MODULE +}; + +/* #define DEBUG_LOCK_BITS */ +//#define DEBUG_CFI_FEATURES + +#ifdef DEBUG_CFI_FEATURES +static void cfi_tell_features(struct cfi_pri_intelext *extp) +{ + int i; + printk(" Feature/Command Support: %4.4X\n", extp->FeatureSupport); + printk(" - Chip Erase: %s\n", extp->FeatureSupport&1?"supported":"unsupported"); + printk(" - Suspend Erase: %s\n", extp->FeatureSupport&2?"supported":"unsupported"); + printk(" - Suspend Program: %s\n", extp->FeatureSupport&4?"supported":"unsupported"); + printk(" - Legacy Lock/Unlock: %s\n", extp->FeatureSupport&8?"supported":"unsupported"); + printk(" - Queued Erase: %s\n", extp->FeatureSupport&16?"supported":"unsupported"); + printk(" - Instant block lock: %s\n", extp->FeatureSupport&32?"supported":"unsupported"); + printk(" - Protection Bits: %s\n", extp->FeatureSupport&64?"supported":"unsupported"); + printk(" - Page-mode read: %s\n", extp->FeatureSupport&128?"supported":"unsupported"); + printk(" - Synchronous read: %s\n", extp->FeatureSupport&256?"supported":"unsupported"); + for (i=9; i<32; i++) { + if (extp->FeatureSupport & (1<SuspendCmdSupport); + printk(" - Program after Erase Suspend: %s\n", extp->SuspendCmdSupport&1?"supported":"unsupported"); + for (i=1; i<8; i++) { + if (extp->SuspendCmdSupport & (1<BlkStatusRegMask); + printk(" - Lock Bit Active: %s\n", extp->BlkStatusRegMask&1?"yes":"no"); + printk(" - Valid Bit Active: %s\n", extp->BlkStatusRegMask&2?"yes":"no"); + for (i=2; i<16; i++) { + if (extp->BlkStatusRegMask & (1<VccOptimal >> 8, extp->VccOptimal & 0xf); + if (extp->VppOptimal) + printk(" Vpp Programming Supply Optimum Program/Erase Voltage: %d.%d V\n", + extp->VppOptimal >> 8, extp->VppOptimal & 0xf); +} +#endif + +/* This routine is made available to other mtd code via + * inter_module_register. It must only be accessed through + * inter_module_get which will bump the use count of this module. The + * addresses passed back in cfi are valid as long as the use count of + * this module is non-zero, i.e. between inter_module_get and + * inter_module_put. Keith Owens 29 Oct 2000. + */ +struct mtd_info *cfi_cmdset_0020(struct map_info *map, int primary) +{ + struct cfi_private *cfi = map->fldrv_priv; + int i; + + if (cfi->cfi_mode) { + /* + * It's a real CFI chip, not one for which the probe + * routine faked a CFI structure. So we read the feature + * table from it. + */ + __u16 adr = primary?cfi->cfiq->P_ADR:cfi->cfiq->A_ADR; + struct cfi_pri_intelext *extp; + + extp = (struct cfi_pri_intelext*)cfi_read_pri(map, adr, sizeof(*extp), "ST Microelectronics"); + if (!extp) + return NULL; + + /* Do some byteswapping if necessary */ + extp->FeatureSupport = cfi32_to_cpu(extp->FeatureSupport); + extp->BlkStatusRegMask = cfi32_to_cpu(extp->BlkStatusRegMask); + +#ifdef DEBUG_CFI_FEATURES + /* Tell the user about it in lots of lovely detail */ + cfi_tell_features(extp); +#endif + + /* Install our own private info structure */ + cfi->cmdset_priv = extp; + } + + for (i=0; i< cfi->numchips; i++) { + cfi->chips[i].word_write_time = 128; + cfi->chips[i].buffer_write_time = 128; + cfi->chips[i].erase_time = 1024; + } + + return cfi_staa_setup(map); +} + +static struct mtd_info *cfi_staa_setup(struct map_info *map) +{ + struct cfi_private *cfi = map->fldrv_priv; + struct mtd_info *mtd; + unsigned long offset = 0; + int i,j; + unsigned long devsize = (1<cfiq->DevSize) * cfi->interleave; + + mtd = kmalloc(sizeof(*mtd), GFP_KERNEL); + //printk(KERN_DEBUG "number of CFI chips: %d\n", cfi->numchips); + + if (!mtd) { + printk(KERN_ERR "Failed to allocate memory for MTD device\n"); + kfree(cfi->cmdset_priv); + return NULL; + } + + memset(mtd, 0, sizeof(*mtd)); + mtd->priv = map; + mtd->type = MTD_NORFLASH; + mtd->size = devsize * cfi->numchips; + + mtd->numeraseregions = cfi->cfiq->NumEraseRegions * cfi->numchips; + mtd->eraseregions = kmalloc(sizeof(struct mtd_erase_region_info) + * mtd->numeraseregions, GFP_KERNEL); + if (!mtd->eraseregions) { + printk(KERN_ERR "Failed to allocate memory for MTD erase region info\n"); + kfree(cfi->cmdset_priv); + kfree(mtd); + return NULL; + } + + for (i=0; icfiq->NumEraseRegions; i++) { + unsigned long ernum, ersize; + ersize = ((cfi->cfiq->EraseRegionInfo[i] >> 8) & ~0xff) * cfi->interleave; + ernum = (cfi->cfiq->EraseRegionInfo[i] & 0xffff) + 1; + + if (mtd->erasesize < ersize) { + mtd->erasesize = ersize; + } + for (j=0; jnumchips; j++) { + mtd->eraseregions[(j*cfi->cfiq->NumEraseRegions)+i].offset = (j*devsize)+offset; + mtd->eraseregions[(j*cfi->cfiq->NumEraseRegions)+i].erasesize = ersize; + mtd->eraseregions[(j*cfi->cfiq->NumEraseRegions)+i].numblocks = ernum; + } + offset += (ersize * ernum); + } + + if (offset != devsize) { + /* Argh */ + printk(KERN_WARNING "Sum of regions (%lx) != total size of set of interleaved chips (%lx)\n", offset, devsize); + kfree(mtd->eraseregions); + kfree(cfi->cmdset_priv); + kfree(mtd); + return NULL; + } + + for (i=0; inumeraseregions;i++){ + printk(KERN_DEBUG "%d: offset=0x%x,size=0x%x,blocks=%d\n", + i,mtd->eraseregions[i].offset, + mtd->eraseregions[i].erasesize, + mtd->eraseregions[i].numblocks); + } + + /* Also select the correct geometry setup too */ + mtd->erase = cfi_staa_erase_varsize; + mtd->read = cfi_staa_read; + mtd->write = cfi_staa_write_buffers; + mtd->writev = cfi_staa_writev; + mtd->sync = cfi_staa_sync; + mtd->lock = cfi_staa_lock; + mtd->unlock = cfi_staa_unlock; + mtd->suspend = cfi_staa_suspend; + mtd->resume = cfi_staa_resume; + mtd->flags = MTD_CAP_NORFLASH; + mtd->flags |= MTD_ECC; /* FIXME: Not all STMicro flashes have this */ + mtd->eccsize = 8; /* FIXME: Should be 0 for STMicro flashes w/out ECC */ + map->fldrv = &cfi_staa_chipdrv; + __module_get(THIS_MODULE); + mtd->name = map->name; + return mtd; +} + + +static inline int do_read_onechip(struct map_info *map, struct flchip *chip, loff_t adr, size_t len, u_char *buf) +{ + map_word status, status_OK; + unsigned long timeo; + DECLARE_WAITQUEUE(wait, current); + int suspended = 0; + unsigned long cmd_addr; + struct cfi_private *cfi = map->fldrv_priv; + + adr += chip->start; + + /* Ensure cmd read/writes are aligned. */ + cmd_addr = adr & ~(map_bankwidth(map)-1); + + /* Let's determine this according to the interleave only once */ + status_OK = CMD(0x80); + + timeo = jiffies + HZ; + retry: + spin_lock_bh(chip->mutex); + + /* Check that the chip's ready to talk to us. + * If it's in FL_ERASING state, suspend it and make it talk now. + */ + switch (chip->state) { + case FL_ERASING: + if (!(((struct cfi_pri_intelext *)cfi->cmdset_priv)->FeatureSupport & 2)) + goto sleep; /* We don't support erase suspend */ + + map_write (map, CMD(0xb0), cmd_addr); + /* If the flash has finished erasing, then 'erase suspend' + * appears to make some (28F320) flash devices switch to + * 'read' mode. Make sure that we switch to 'read status' + * mode so we get the right data. --rmk + */ + map_write(map, CMD(0x70), cmd_addr); + chip->oldstate = FL_ERASING; + chip->state = FL_ERASE_SUSPENDING; + // printk("Erase suspending at 0x%lx\n", cmd_addr); + for (;;) { + status = map_read(map, cmd_addr); + if (map_word_andequal(map, status, status_OK, status_OK)) + break; + + if (time_after(jiffies, timeo)) { + /* Urgh */ + map_write(map, CMD(0xd0), cmd_addr); + /* make sure we're in 'read status' mode */ + map_write(map, CMD(0x70), cmd_addr); + chip->state = FL_ERASING; + spin_unlock_bh(chip->mutex); + printk(KERN_ERR "Chip not ready after erase " + "suspended: status = 0x%lx\n", status.x[0]); + return -EIO; + } + + spin_unlock_bh(chip->mutex); + cfi_udelay(1); + spin_lock_bh(chip->mutex); + } + + suspended = 1; + map_write(map, CMD(0xff), cmd_addr); + chip->state = FL_READY; + break; + +#if 0 + case FL_WRITING: + /* Not quite yet */ +#endif + + case FL_READY: + break; + + case FL_CFI_QUERY: + case FL_JEDEC_QUERY: + map_write(map, CMD(0x70), cmd_addr); + chip->state = FL_STATUS; + + case FL_STATUS: + status = map_read(map, cmd_addr); + if (map_word_andequal(map, status, status_OK, status_OK)) { + map_write(map, CMD(0xff), cmd_addr); + chip->state = FL_READY; + break; + } + + /* Urgh. Chip not yet ready to talk to us. */ + if (time_after(jiffies, timeo)) { + spin_unlock_bh(chip->mutex); + printk(KERN_ERR "waiting for chip to be ready timed out in read. WSM status = %lx\n", status.x[0]); + return -EIO; + } + + /* Latency issues. Drop the lock, wait a while and retry */ + spin_unlock_bh(chip->mutex); + cfi_udelay(1); + goto retry; + + default: + sleep: + /* Stick ourselves on a wait queue to be woken when + someone changes the status */ + set_current_state(TASK_UNINTERRUPTIBLE); + add_wait_queue(&chip->wq, &wait); + spin_unlock_bh(chip->mutex); + schedule(); + remove_wait_queue(&chip->wq, &wait); + timeo = jiffies + HZ; + goto retry; + } + + map_copy_from(map, buf, adr, len); + + if (suspended) { + chip->state = chip->oldstate; + /* What if one interleaved chip has finished and the + other hasn't? The old code would leave the finished + one in READY mode. That's bad, and caused -EROFS + errors to be returned from do_erase_oneblock because + that's the only bit it checked for at the time. + As the state machine appears to explicitly allow + sending the 0x70 (Read Status) command to an erasing + chip and expecting it to be ignored, that's what we + do. */ + map_write(map, CMD(0xd0), cmd_addr); + map_write(map, CMD(0x70), cmd_addr); + } + + wake_up(&chip->wq); + spin_unlock_bh(chip->mutex); + return 0; +} + +static int cfi_staa_read (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + unsigned long ofs; + int chipnum; + int ret = 0; + + /* ofs: offset within the first chip that the first read should start */ + chipnum = (from >> cfi->chipshift); + ofs = from - (chipnum << cfi->chipshift); + + *retlen = 0; + + while (len) { + unsigned long thislen; + + if (chipnum >= cfi->numchips) + break; + + if ((len + ofs -1) >> cfi->chipshift) + thislen = (1<chipshift) - ofs; + else + thislen = len; + + ret = do_read_onechip(map, &cfi->chips[chipnum], ofs, thislen, buf); + if (ret) + break; + + *retlen += thislen; + len -= thislen; + buf += thislen; + + ofs = 0; + chipnum++; + } + return ret; +} + +static inline int do_write_buffer(struct map_info *map, struct flchip *chip, + unsigned long adr, const u_char *buf, int len) +{ + struct cfi_private *cfi = map->fldrv_priv; + map_word status, status_OK; + unsigned long cmd_adr, timeo; + DECLARE_WAITQUEUE(wait, current); + int wbufsize, z; + + /* M58LW064A requires bus alignment for buffer wriets -- saw */ + if (adr & (map_bankwidth(map)-1)) + return -EINVAL; + + wbufsize = cfi_interleave(cfi) << cfi->cfiq->MaxBufWriteSize; + adr += chip->start; + cmd_adr = adr & ~(wbufsize-1); + + /* Let's determine this according to the interleave only once */ + status_OK = CMD(0x80); + + timeo = jiffies + HZ; + retry: + +#ifdef DEBUG_CFI_FEATURES + printk("%s: chip->state[%d]\n", __FUNCTION__, chip->state); +#endif + spin_lock_bh(chip->mutex); + + /* Check that the chip's ready to talk to us. + * Later, we can actually think about interrupting it + * if it's in FL_ERASING state. + * Not just yet, though. + */ + switch (chip->state) { + case FL_READY: + break; + + case FL_CFI_QUERY: + case FL_JEDEC_QUERY: + map_write(map, CMD(0x70), cmd_adr); + chip->state = FL_STATUS; +#ifdef DEBUG_CFI_FEATURES + printk("%s: 1 status[%x]\n", __FUNCTION__, map_read(map, cmd_adr)); +#endif + + case FL_STATUS: + status = map_read(map, cmd_adr); + if (map_word_andequal(map, status, status_OK, status_OK)) + break; + /* Urgh. Chip not yet ready to talk to us. */ + if (time_after(jiffies, timeo)) { + spin_unlock_bh(chip->mutex); + printk(KERN_ERR "waiting for chip to be ready timed out in buffer write Xstatus = %lx, status = %lx\n", + status.x[0], map_read(map, cmd_adr).x[0]); + return -EIO; + } + + /* Latency issues. Drop the lock, wait a while and retry */ + spin_unlock_bh(chip->mutex); + cfi_udelay(1); + goto retry; + + default: + /* Stick ourselves on a wait queue to be woken when + someone changes the status */ + set_current_state(TASK_UNINTERRUPTIBLE); + add_wait_queue(&chip->wq, &wait); + spin_unlock_bh(chip->mutex); + schedule(); + remove_wait_queue(&chip->wq, &wait); + timeo = jiffies + HZ; + goto retry; + } + + ENABLE_VPP(map); + map_write(map, CMD(0xe8), cmd_adr); + chip->state = FL_WRITING_TO_BUFFER; + + z = 0; + for (;;) { + status = map_read(map, cmd_adr); + if (map_word_andequal(map, status, status_OK, status_OK)) + break; + + spin_unlock_bh(chip->mutex); + cfi_udelay(1); + spin_lock_bh(chip->mutex); + + if (++z > 100) { + /* Argh. Not ready for write to buffer */ + DISABLE_VPP(map); + map_write(map, CMD(0x70), cmd_adr); + chip->state = FL_STATUS; + spin_unlock_bh(chip->mutex); + printk(KERN_ERR "Chip not ready for buffer write. Xstatus = %lx\n", status.x[0]); + return -EIO; + } + } + + /* Write length of data to come */ + map_write(map, CMD(len/map_bankwidth(map)-1), cmd_adr ); + + /* Write data */ + for (z = 0; z < len; + z += map_bankwidth(map), buf += map_bankwidth(map)) { + map_word d; + d = map_word_load(map, buf); + map_write(map, d, adr+z); + } + /* GO GO GO */ + map_write(map, CMD(0xd0), cmd_adr); + chip->state = FL_WRITING; + + spin_unlock_bh(chip->mutex); + cfi_udelay(chip->buffer_write_time); + spin_lock_bh(chip->mutex); + + timeo = jiffies + (HZ/2); + z = 0; + for (;;) { + if (chip->state != FL_WRITING) { + /* Someone's suspended the write. Sleep */ + set_current_state(TASK_UNINTERRUPTIBLE); + add_wait_queue(&chip->wq, &wait); + spin_unlock_bh(chip->mutex); + schedule(); + remove_wait_queue(&chip->wq, &wait); + timeo = jiffies + (HZ / 2); /* FIXME */ + spin_lock_bh(chip->mutex); + continue; + } + + status = map_read(map, cmd_adr); + if (map_word_andequal(map, status, status_OK, status_OK)) + break; + + /* OK Still waiting */ + if (time_after(jiffies, timeo)) { + /* clear status */ + map_write(map, CMD(0x50), cmd_adr); + /* put back into read status register mode */ + map_write(map, CMD(0x70), adr); + chip->state = FL_STATUS; + DISABLE_VPP(map); + spin_unlock_bh(chip->mutex); + printk(KERN_ERR "waiting for chip to be ready timed out in bufwrite\n"); + return -EIO; + } + + /* Latency issues. Drop the lock, wait a while and retry */ + spin_unlock_bh(chip->mutex); + cfi_udelay(1); + z++; + spin_lock_bh(chip->mutex); + } + if (!z) { + chip->buffer_write_time--; + if (!chip->buffer_write_time) + chip->buffer_write_time++; + } + if (z > 1) + chip->buffer_write_time++; + + /* Done and happy. */ + DISABLE_VPP(map); + chip->state = FL_STATUS; + + /* check for errors: 'lock bit', 'VPP', 'dead cell'/'unerased cell' or 'incorrect cmd' -- saw */ + if (map_word_bitsset(map, status, CMD(0x3a))) { +#ifdef DEBUG_CFI_FEATURES + printk("%s: 2 status[%lx]\n", __FUNCTION__, status.x[0]); +#endif + /* clear status */ + map_write(map, CMD(0x50), cmd_adr); + /* put back into read status register mode */ + map_write(map, CMD(0x70), adr); + wake_up(&chip->wq); + spin_unlock_bh(chip->mutex); + return map_word_bitsset(map, status, CMD(0x02)) ? -EROFS : -EIO; + } + wake_up(&chip->wq); + spin_unlock_bh(chip->mutex); + + return 0; +} + +static int cfi_staa_write_buffers (struct mtd_info *mtd, loff_t to, + size_t len, size_t *retlen, const u_char *buf) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + int wbufsize = cfi_interleave(cfi) << cfi->cfiq->MaxBufWriteSize; + int ret = 0; + int chipnum; + unsigned long ofs; + + *retlen = 0; + if (!len) + return 0; + + chipnum = to >> cfi->chipshift; + ofs = to - (chipnum << cfi->chipshift); + +#ifdef DEBUG_CFI_FEATURES + printk("%s: map_bankwidth(map)[%x]\n", __FUNCTION__, map_bankwidth(map)); + printk("%s: chipnum[%x] wbufsize[%x]\n", __FUNCTION__, chipnum, wbufsize); + printk("%s: ofs[%x] len[%x]\n", __FUNCTION__, ofs, len); +#endif + + /* Write buffer is worth it only if more than one word to write... */ + while (len > 0) { + /* We must not cross write block boundaries */ + int size = wbufsize - (ofs & (wbufsize-1)); + + if (size > len) + size = len; + + ret = do_write_buffer(map, &cfi->chips[chipnum], + ofs, buf, size); + if (ret) + return ret; + + ofs += size; + buf += size; + (*retlen) += size; + len -= size; + + if (ofs >> cfi->chipshift) { + chipnum ++; + ofs = 0; + if (chipnum == cfi->numchips) + return 0; + } + } + + return 0; +} + +/* + * Writev for ECC-Flashes is a little more complicated. We need to maintain + * a small buffer for this. + * XXX: If the buffer size is not a multiple of 2, this will break + */ +#define ECCBUF_SIZE (mtd->eccsize) +#define ECCBUF_DIV(x) ((x) & ~(ECCBUF_SIZE - 1)) +#define ECCBUF_MOD(x) ((x) & (ECCBUF_SIZE - 1)) +static int +cfi_staa_writev(struct mtd_info *mtd, const struct kvec *vecs, + unsigned long count, loff_t to, size_t *retlen) +{ + unsigned long i; + size_t totlen = 0, thislen; + int ret = 0; + size_t buflen = 0; + static char *buffer; + + if (!ECCBUF_SIZE) { + /* We should fall back to a general writev implementation. + * Until that is written, just break. + */ + return -EIO; + } + buffer = kmalloc(ECCBUF_SIZE, GFP_KERNEL); + if (!buffer) + return -ENOMEM; + + for (i=0; iwrite(mtd, to, ECCBUF_SIZE, &thislen, buffer); + totlen += thislen; + if (ret || thislen != ECCBUF_SIZE) + goto write_error; + elem_len -= thislen-buflen; + elem_base += thislen-buflen; + to += ECCBUF_SIZE; + } + if (ECCBUF_DIV(elem_len)) { /* write clean aligned data */ + ret = mtd->write(mtd, to, ECCBUF_DIV(elem_len), &thislen, elem_base); + totlen += thislen; + if (ret || thislen != ECCBUF_DIV(elem_len)) + goto write_error; + to += thislen; + } + buflen = ECCBUF_MOD(elem_len); /* cut off tail */ + if (buflen) { + memset(buffer, 0xff, ECCBUF_SIZE); + memcpy(buffer, elem_base + thislen, buflen); + } + } + if (buflen) { /* flush last page, even if not full */ + /* This is sometimes intended behaviour, really */ + ret = mtd->write(mtd, to, buflen, &thislen, buffer); + totlen += thislen; + if (ret || thislen != ECCBUF_SIZE) + goto write_error; + } +write_error: + if (retlen) + *retlen = totlen; + return ret; +} + + +static inline int do_erase_oneblock(struct map_info *map, struct flchip *chip, unsigned long adr) +{ + struct cfi_private *cfi = map->fldrv_priv; + map_word status, status_OK; + unsigned long timeo; + int retries = 3; + DECLARE_WAITQUEUE(wait, current); + int ret = 0; + + adr += chip->start; + + /* Let's determine this according to the interleave only once */ + status_OK = CMD(0x80); + + timeo = jiffies + HZ; +retry: + spin_lock_bh(chip->mutex); + + /* Check that the chip's ready to talk to us. */ + switch (chip->state) { + case FL_CFI_QUERY: + case FL_JEDEC_QUERY: + case FL_READY: + map_write(map, CMD(0x70), adr); + chip->state = FL_STATUS; + + case FL_STATUS: + status = map_read(map, adr); + if (map_word_andequal(map, status, status_OK, status_OK)) + break; + + /* Urgh. Chip not yet ready to talk to us. */ + if (time_after(jiffies, timeo)) { + spin_unlock_bh(chip->mutex); + printk(KERN_ERR "waiting for chip to be ready timed out in erase\n"); + return -EIO; + } + + /* Latency issues. Drop the lock, wait a while and retry */ + spin_unlock_bh(chip->mutex); + cfi_udelay(1); + goto retry; + + default: + /* Stick ourselves on a wait queue to be woken when + someone changes the status */ + set_current_state(TASK_UNINTERRUPTIBLE); + add_wait_queue(&chip->wq, &wait); + spin_unlock_bh(chip->mutex); + schedule(); + remove_wait_queue(&chip->wq, &wait); + timeo = jiffies + HZ; + goto retry; + } + + ENABLE_VPP(map); + /* Clear the status register first */ + map_write(map, CMD(0x50), adr); + + /* Now erase */ + map_write(map, CMD(0x20), adr); + map_write(map, CMD(0xD0), adr); + chip->state = FL_ERASING; + + spin_unlock_bh(chip->mutex); + msleep(1000); + spin_lock_bh(chip->mutex); + + /* FIXME. Use a timer to check this, and return immediately. */ + /* Once the state machine's known to be working I'll do that */ + + timeo = jiffies + (HZ*20); + for (;;) { + if (chip->state != FL_ERASING) { + /* Someone's suspended the erase. Sleep */ + set_current_state(TASK_UNINTERRUPTIBLE); + add_wait_queue(&chip->wq, &wait); + spin_unlock_bh(chip->mutex); + schedule(); + remove_wait_queue(&chip->wq, &wait); + timeo = jiffies + (HZ*20); /* FIXME */ + spin_lock_bh(chip->mutex); + continue; + } + + status = map_read(map, adr); + if (map_word_andequal(map, status, status_OK, status_OK)) + break; + + /* OK Still waiting */ + if (time_after(jiffies, timeo)) { + map_write(map, CMD(0x70), adr); + chip->state = FL_STATUS; + printk(KERN_ERR "waiting for erase to complete timed out. Xstatus = %lx, status = %lx.\n", status.x[0], map_read(map, adr).x[0]); + DISABLE_VPP(map); + spin_unlock_bh(chip->mutex); + return -EIO; + } + + /* Latency issues. Drop the lock, wait a while and retry */ + spin_unlock_bh(chip->mutex); + cfi_udelay(1); + spin_lock_bh(chip->mutex); + } + + DISABLE_VPP(map); + ret = 0; + + /* We've broken this before. It doesn't hurt to be safe */ + map_write(map, CMD(0x70), adr); + chip->state = FL_STATUS; + status = map_read(map, adr); + + /* check for lock bit */ + if (map_word_bitsset(map, status, CMD(0x3a))) { + unsigned char chipstatus = status.x[0]; + if (!map_word_equal(map, status, CMD(chipstatus))) { + int i, w; + for (w=0; w> (cfi->device_type * 8); + } + } + printk(KERN_WARNING "Status is not identical for all chips: 0x%lx. Merging to give 0x%02x\n", + status.x[0], chipstatus); + } + /* Reset the error bits */ + map_write(map, CMD(0x50), adr); + map_write(map, CMD(0x70), adr); + + if ((chipstatus & 0x30) == 0x30) { + printk(KERN_NOTICE "Chip reports improper command sequence: status 0x%x\n", chipstatus); + ret = -EIO; + } else if (chipstatus & 0x02) { + /* Protection bit set */ + ret = -EROFS; + } else if (chipstatus & 0x8) { + /* Voltage */ + printk(KERN_WARNING "Chip reports voltage low on erase: status 0x%x\n", chipstatus); + ret = -EIO; + } else if (chipstatus & 0x20) { + if (retries--) { + printk(KERN_DEBUG "Chip erase failed at 0x%08lx: status 0x%x. Retrying...\n", adr, chipstatus); + timeo = jiffies + HZ; + chip->state = FL_STATUS; + spin_unlock_bh(chip->mutex); + goto retry; + } + printk(KERN_DEBUG "Chip erase failed at 0x%08lx: status 0x%x\n", adr, chipstatus); + ret = -EIO; + } + } + + wake_up(&chip->wq); + spin_unlock_bh(chip->mutex); + return ret; +} + +int cfi_staa_erase_varsize(struct mtd_info *mtd, struct erase_info *instr) +{ struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + unsigned long adr, len; + int chipnum, ret = 0; + int i, first; + struct mtd_erase_region_info *regions = mtd->eraseregions; + + if (instr->addr > mtd->size) + return -EINVAL; + + if ((instr->len + instr->addr) > mtd->size) + return -EINVAL; + + /* Check that both start and end of the requested erase are + * aligned with the erasesize at the appropriate addresses. + */ + + i = 0; + + /* Skip all erase regions which are ended before the start of + the requested erase. Actually, to save on the calculations, + we skip to the first erase region which starts after the + start of the requested erase, and then go back one. + */ + + while (i < mtd->numeraseregions && instr->addr >= regions[i].offset) + i++; + i--; + + /* OK, now i is pointing at the erase region in which this + erase request starts. Check the start of the requested + erase range is aligned with the erase size which is in + effect here. + */ + + if (instr->addr & (regions[i].erasesize-1)) + return -EINVAL; + + /* Remember the erase region we start on */ + first = i; + + /* Next, check that the end of the requested erase is aligned + * with the erase region at that address. + */ + + while (inumeraseregions && (instr->addr + instr->len) >= regions[i].offset) + i++; + + /* As before, drop back one to point at the region in which + the address actually falls + */ + i--; + + if ((instr->addr + instr->len) & (regions[i].erasesize-1)) + return -EINVAL; + + chipnum = instr->addr >> cfi->chipshift; + adr = instr->addr - (chipnum << cfi->chipshift); + len = instr->len; + + i=first; + + while(len) { + ret = do_erase_oneblock(map, &cfi->chips[chipnum], adr); + + if (ret) + return ret; + + adr += regions[i].erasesize; + len -= regions[i].erasesize; + + if (adr % (1<< cfi->chipshift) == ((regions[i].offset + (regions[i].erasesize * regions[i].numblocks)) %( 1<< cfi->chipshift))) + i++; + + if (adr >> cfi->chipshift) { + adr = 0; + chipnum++; + + if (chipnum >= cfi->numchips) + break; + } + } + + instr->state = MTD_ERASE_DONE; + mtd_erase_callback(instr); + + return 0; +} + +static void cfi_staa_sync (struct mtd_info *mtd) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + int i; + struct flchip *chip; + int ret = 0; + DECLARE_WAITQUEUE(wait, current); + + for (i=0; !ret && inumchips; i++) { + chip = &cfi->chips[i]; + + retry: + spin_lock_bh(chip->mutex); + + switch(chip->state) { + case FL_READY: + case FL_STATUS: + case FL_CFI_QUERY: + case FL_JEDEC_QUERY: + chip->oldstate = chip->state; + chip->state = FL_SYNCING; + /* No need to wake_up() on this state change - + * as the whole point is that nobody can do anything + * with the chip now anyway. + */ + case FL_SYNCING: + spin_unlock_bh(chip->mutex); + break; + + default: + /* Not an idle state */ + add_wait_queue(&chip->wq, &wait); + + spin_unlock_bh(chip->mutex); + schedule(); + remove_wait_queue(&chip->wq, &wait); + + goto retry; + } + } + + /* Unlock the chips again */ + + for (i--; i >=0; i--) { + chip = &cfi->chips[i]; + + spin_lock_bh(chip->mutex); + + if (chip->state == FL_SYNCING) { + chip->state = chip->oldstate; + wake_up(&chip->wq); + } + spin_unlock_bh(chip->mutex); + } +} + +static inline int do_lock_oneblock(struct map_info *map, struct flchip *chip, unsigned long adr) +{ + struct cfi_private *cfi = map->fldrv_priv; + map_word status, status_OK; + unsigned long timeo = jiffies + HZ; + DECLARE_WAITQUEUE(wait, current); + + adr += chip->start; + + /* Let's determine this according to the interleave only once */ + status_OK = CMD(0x80); + + timeo = jiffies + HZ; +retry: + spin_lock_bh(chip->mutex); + + /* Check that the chip's ready to talk to us. */ + switch (chip->state) { + case FL_CFI_QUERY: + case FL_JEDEC_QUERY: + case FL_READY: + map_write(map, CMD(0x70), adr); + chip->state = FL_STATUS; + + case FL_STATUS: + status = map_read(map, adr); + if (map_word_andequal(map, status, status_OK, status_OK)) + break; + + /* Urgh. Chip not yet ready to talk to us. */ + if (time_after(jiffies, timeo)) { + spin_unlock_bh(chip->mutex); + printk(KERN_ERR "waiting for chip to be ready timed out in lock\n"); + return -EIO; + } + + /* Latency issues. Drop the lock, wait a while and retry */ + spin_unlock_bh(chip->mutex); + cfi_udelay(1); + goto retry; + + default: + /* Stick ourselves on a wait queue to be woken when + someone changes the status */ + set_current_state(TASK_UNINTERRUPTIBLE); + add_wait_queue(&chip->wq, &wait); + spin_unlock_bh(chip->mutex); + schedule(); + remove_wait_queue(&chip->wq, &wait); + timeo = jiffies + HZ; + goto retry; + } + + ENABLE_VPP(map); + map_write(map, CMD(0x60), adr); + map_write(map, CMD(0x01), adr); + chip->state = FL_LOCKING; + + spin_unlock_bh(chip->mutex); + msleep(1000); + spin_lock_bh(chip->mutex); + + /* FIXME. Use a timer to check this, and return immediately. */ + /* Once the state machine's known to be working I'll do that */ + + timeo = jiffies + (HZ*2); + for (;;) { + + status = map_read(map, adr); + if (map_word_andequal(map, status, status_OK, status_OK)) + break; + + /* OK Still waiting */ + if (time_after(jiffies, timeo)) { + map_write(map, CMD(0x70), adr); + chip->state = FL_STATUS; + printk(KERN_ERR "waiting for lock to complete timed out. Xstatus = %lx, status = %lx.\n", status.x[0], map_read(map, adr).x[0]); + DISABLE_VPP(map); + spin_unlock_bh(chip->mutex); + return -EIO; + } + + /* Latency issues. Drop the lock, wait a while and retry */ + spin_unlock_bh(chip->mutex); + cfi_udelay(1); + spin_lock_bh(chip->mutex); + } + + /* Done and happy. */ + chip->state = FL_STATUS; + DISABLE_VPP(map); + wake_up(&chip->wq); + spin_unlock_bh(chip->mutex); + return 0; +} +static int cfi_staa_lock(struct mtd_info *mtd, loff_t ofs, size_t len) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + unsigned long adr; + int chipnum, ret = 0; +#ifdef DEBUG_LOCK_BITS + int ofs_factor = cfi->interleave * cfi->device_type; +#endif + + if (ofs & (mtd->erasesize - 1)) + return -EINVAL; + + if (len & (mtd->erasesize -1)) + return -EINVAL; + + if ((len + ofs) > mtd->size) + return -EINVAL; + + chipnum = ofs >> cfi->chipshift; + adr = ofs - (chipnum << cfi->chipshift); + + while(len) { + +#ifdef DEBUG_LOCK_BITS + cfi_send_gen_cmd(0x90, 0x55, 0, map, cfi, cfi->device_type, NULL); + printk("before lock: block status register is %x\n",cfi_read_query(map, adr+(2*ofs_factor))); + cfi_send_gen_cmd(0xff, 0x55, 0, map, cfi, cfi->device_type, NULL); +#endif + + ret = do_lock_oneblock(map, &cfi->chips[chipnum], adr); + +#ifdef DEBUG_LOCK_BITS + cfi_send_gen_cmd(0x90, 0x55, 0, map, cfi, cfi->device_type, NULL); + printk("after lock: block status register is %x\n",cfi_read_query(map, adr+(2*ofs_factor))); + cfi_send_gen_cmd(0xff, 0x55, 0, map, cfi, cfi->device_type, NULL); +#endif + + if (ret) + return ret; + + adr += mtd->erasesize; + len -= mtd->erasesize; + + if (adr >> cfi->chipshift) { + adr = 0; + chipnum++; + + if (chipnum >= cfi->numchips) + break; + } + } + return 0; +} +static inline int do_unlock_oneblock(struct map_info *map, struct flchip *chip, unsigned long adr) +{ + struct cfi_private *cfi = map->fldrv_priv; + map_word status, status_OK; + unsigned long timeo = jiffies + HZ; + DECLARE_WAITQUEUE(wait, current); + + adr += chip->start; + + /* Let's determine this according to the interleave only once */ + status_OK = CMD(0x80); + + timeo = jiffies + HZ; +retry: + spin_lock_bh(chip->mutex); + + /* Check that the chip's ready to talk to us. */ + switch (chip->state) { + case FL_CFI_QUERY: + case FL_JEDEC_QUERY: + case FL_READY: + map_write(map, CMD(0x70), adr); + chip->state = FL_STATUS; + + case FL_STATUS: + status = map_read(map, adr); + if (map_word_andequal(map, status, status_OK, status_OK)) + break; + + /* Urgh. Chip not yet ready to talk to us. */ + if (time_after(jiffies, timeo)) { + spin_unlock_bh(chip->mutex); + printk(KERN_ERR "waiting for chip to be ready timed out in unlock\n"); + return -EIO; + } + + /* Latency issues. Drop the lock, wait a while and retry */ + spin_unlock_bh(chip->mutex); + cfi_udelay(1); + goto retry; + + default: + /* Stick ourselves on a wait queue to be woken when + someone changes the status */ + set_current_state(TASK_UNINTERRUPTIBLE); + add_wait_queue(&chip->wq, &wait); + spin_unlock_bh(chip->mutex); + schedule(); + remove_wait_queue(&chip->wq, &wait); + timeo = jiffies + HZ; + goto retry; + } + + ENABLE_VPP(map); + map_write(map, CMD(0x60), adr); + map_write(map, CMD(0xD0), adr); + chip->state = FL_UNLOCKING; + + spin_unlock_bh(chip->mutex); + msleep(1000); + spin_lock_bh(chip->mutex); + + /* FIXME. Use a timer to check this, and return immediately. */ + /* Once the state machine's known to be working I'll do that */ + + timeo = jiffies + (HZ*2); + for (;;) { + + status = map_read(map, adr); + if (map_word_andequal(map, status, status_OK, status_OK)) + break; + + /* OK Still waiting */ + if (time_after(jiffies, timeo)) { + map_write(map, CMD(0x70), adr); + chip->state = FL_STATUS; + printk(KERN_ERR "waiting for unlock to complete timed out. Xstatus = %lx, status = %lx.\n", status.x[0], map_read(map, adr).x[0]); + DISABLE_VPP(map); + spin_unlock_bh(chip->mutex); + return -EIO; + } + + /* Latency issues. Drop the unlock, wait a while and retry */ + spin_unlock_bh(chip->mutex); + cfi_udelay(1); + spin_lock_bh(chip->mutex); + } + + /* Done and happy. */ + chip->state = FL_STATUS; + DISABLE_VPP(map); + wake_up(&chip->wq); + spin_unlock_bh(chip->mutex); + return 0; +} +static int cfi_staa_unlock(struct mtd_info *mtd, loff_t ofs, size_t len) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + unsigned long adr; + int chipnum, ret = 0; +#ifdef DEBUG_LOCK_BITS + int ofs_factor = cfi->interleave * cfi->device_type; +#endif + + chipnum = ofs >> cfi->chipshift; + adr = ofs - (chipnum << cfi->chipshift); + +#ifdef DEBUG_LOCK_BITS + { + unsigned long temp_adr = adr; + unsigned long temp_len = len; + + cfi_send_gen_cmd(0x90, 0x55, 0, map, cfi, cfi->device_type, NULL); + while (temp_len) { + printk("before unlock %x: block status register is %x\n",temp_adr,cfi_read_query(map, temp_adr+(2*ofs_factor))); + temp_adr += mtd->erasesize; + temp_len -= mtd->erasesize; + } + cfi_send_gen_cmd(0xff, 0x55, 0, map, cfi, cfi->device_type, NULL); + } +#endif + + ret = do_unlock_oneblock(map, &cfi->chips[chipnum], adr); + +#ifdef DEBUG_LOCK_BITS + cfi_send_gen_cmd(0x90, 0x55, 0, map, cfi, cfi->device_type, NULL); + printk("after unlock: block status register is %x\n",cfi_read_query(map, adr+(2*ofs_factor))); + cfi_send_gen_cmd(0xff, 0x55, 0, map, cfi, cfi->device_type, NULL); +#endif + + return ret; +} + +static int cfi_staa_suspend(struct mtd_info *mtd) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + int i; + struct flchip *chip; + int ret = 0; + + for (i=0; !ret && inumchips; i++) { + chip = &cfi->chips[i]; + + spin_lock_bh(chip->mutex); + + switch(chip->state) { + case FL_READY: + case FL_STATUS: + case FL_CFI_QUERY: + case FL_JEDEC_QUERY: + chip->oldstate = chip->state; + chip->state = FL_PM_SUSPENDED; + /* No need to wake_up() on this state change - + * as the whole point is that nobody can do anything + * with the chip now anyway. + */ + case FL_PM_SUSPENDED: + break; + + default: + ret = -EAGAIN; + break; + } + spin_unlock_bh(chip->mutex); + } + + /* Unlock the chips again */ + + if (ret) { + for (i--; i >=0; i--) { + chip = &cfi->chips[i]; + + spin_lock_bh(chip->mutex); + + if (chip->state == FL_PM_SUSPENDED) { + /* No need to force it into a known state here, + because we're returning failure, and it didn't + get power cycled */ + chip->state = chip->oldstate; + wake_up(&chip->wq); + } + spin_unlock_bh(chip->mutex); + } + } + + return ret; +} + +static void cfi_staa_resume(struct mtd_info *mtd) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + int i; + struct flchip *chip; + + for (i=0; inumchips; i++) { + + chip = &cfi->chips[i]; + + spin_lock_bh(chip->mutex); + + /* Go to known state. Chip may have been power cycled */ + if (chip->state == FL_PM_SUSPENDED) { + map_write(map, CMD(0xFF), 0); + chip->state = FL_READY; + wake_up(&chip->wq); + } + + spin_unlock_bh(chip->mutex); + } +} + +static void cfi_staa_destroy(struct mtd_info *mtd) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + kfree(cfi->cmdset_priv); + kfree(cfi); +} + +static char im_name[]="cfi_cmdset_0020"; + +static int __init cfi_staa_init(void) +{ + inter_module_register(im_name, THIS_MODULE, &cfi_cmdset_0020); + return 0; +} + +static void __exit cfi_staa_exit(void) +{ + inter_module_unregister(im_name); +} + +module_init(cfi_staa_init); +module_exit(cfi_staa_exit); + +MODULE_LICENSE("GPL"); -- cgit v1.2.3