From ea690ad78dd611e3906df5b948a516000b05c1cb Mon Sep 17 00:00:00 2001 From: Johan Jonker Date: Fri, 14 Jul 2023 17:21:21 +0200 Subject: mtd: rawnand: rockchip: Align hwecc vs. raw page helper layouts Currently, read/write_page_hwecc() and read/write_page_raw() are not aligned: there is a mismatch in the OOB bytes which are not read/written at the same offset in both cases (raw vs. hwecc). This is a real problem when relying on the presence of the Page Addresses (PA) when using the NAND chip as a boot device, as the BootROM expects additional data in the OOB area at specific locations. Rockchip boot blocks are written per 4 x 512 byte sectors per page. Each page with boot blocks must have a page address (PA) pointer in OOB to the next page. Pages are written in a pattern depending on the NAND chip ID. Generate boot block page address and pattern for hwecc in user space and copy PA data to/from the already reserved last 4 bytes before ECC in the chip->oob_poi data layout. Align the different helpers. This change breaks existing jffs2 users. Fixes: 058e0e847d54 ("mtd: rawnand: rockchip: NFC driver for RK3308, RK2928 and others") Signed-off-by: Johan Jonker Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/5e782c08-862b-51ae-47ff-3299940928ca@gmail.com --- drivers/mtd/nand/raw/rockchip-nand-controller.c | 34 +++++++++++++++---------- 1 file changed, 21 insertions(+), 13 deletions(-) (limited to 'drivers/mtd') diff --git a/drivers/mtd/nand/raw/rockchip-nand-controller.c b/drivers/mtd/nand/raw/rockchip-nand-controller.c index 37fc07ba57aa..5a04680342c3 100644 --- a/drivers/mtd/nand/raw/rockchip-nand-controller.c +++ b/drivers/mtd/nand/raw/rockchip-nand-controller.c @@ -598,7 +598,7 @@ static int rk_nfc_write_page_hwecc(struct nand_chip *chip, const u8 *buf, int pages_per_blk = mtd->erasesize / mtd->writesize; int ret = 0, i, boot_rom_mode = 0; dma_addr_t dma_data, dma_oob; - u32 reg; + u32 tmp; u8 *oob; nand_prog_page_begin_op(chip, page, 0, NULL, 0); @@ -625,6 +625,13 @@ static int rk_nfc_write_page_hwecc(struct nand_chip *chip, const u8 *buf, * * 0xFF 0xFF 0xFF 0xFF | BBM OOB1 OOB2 OOB3 | ... * + * The code here just swaps the first 4 bytes with the last + * 4 bytes without losing any data. + * + * The chip->oob_poi data layout: + * + * BBM OOB1 OOB2 OOB3 |......| PA0 PA1 PA2 PA3 + * * Configure the ECC algorithm supported by the boot ROM. */ if ((page < (pages_per_blk * rknand->boot_blks)) && @@ -635,21 +642,17 @@ static int rk_nfc_write_page_hwecc(struct nand_chip *chip, const u8 *buf, } for (i = 0; i < ecc->steps; i++) { - if (!i) { - reg = 0xFFFFFFFF; - } else { + if (!i) + oob = chip->oob_poi + (ecc->steps - 1) * NFC_SYS_DATA_SIZE; + else oob = chip->oob_poi + (i - 1) * NFC_SYS_DATA_SIZE; - reg = oob[0] | oob[1] << 8 | oob[2] << 16 | - oob[3] << 24; - } - if (!i && boot_rom_mode) - reg = (page & (pages_per_blk - 1)) * 4; + tmp = oob[0] | oob[1] << 8 | oob[2] << 16 | oob[3] << 24; if (nfc->cfg->type == NFC_V9) - nfc->oob_buf[i] = reg; + nfc->oob_buf[i] = tmp; else - nfc->oob_buf[i * (oob_step / 4)] = reg; + nfc->oob_buf[i * (oob_step / 4)] = tmp; } dma_data = dma_map_single(nfc->dev, (void *)nfc->page_buf, @@ -812,12 +815,17 @@ static int rk_nfc_read_page_hwecc(struct nand_chip *chip, u8 *buf, int oob_on, goto timeout_err; } - for (i = 1; i < ecc->steps; i++) { - oob = chip->oob_poi + (i - 1) * NFC_SYS_DATA_SIZE; + for (i = 0; i < ecc->steps; i++) { + if (!i) + oob = chip->oob_poi + (ecc->steps - 1) * NFC_SYS_DATA_SIZE; + else + oob = chip->oob_poi + (i - 1) * NFC_SYS_DATA_SIZE; + if (nfc->cfg->type == NFC_V9) tmp = nfc->oob_buf[i]; else tmp = nfc->oob_buf[i * (oob_step / 4)]; + *oob++ = (u8)tmp; *oob++ = (u8)(tmp >> 8); *oob++ = (u8)(tmp >> 16); -- cgit v1.2.3