From 97a4ec0107057a577b63568f31d35e31c39a5b7b Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Thu, 6 May 2021 08:40:00 -0700 Subject: ice: (re)initialize NVM fields when rebuilding After performing a flash update, a device EMP reset may occur. This reset will cause the newly downloaded firmware to be initialized. When this happens, the driver still reports the previous NVM version information. This is because the NVM versions are cached within the hw structure. This can be confusing, as the new firmware is in fact running in this case. Handle this by calling ice_init_nvm when rebuilding the driver state. This will update the flash version information and ensures that the current values are displayed when reporting the NVM versions to the stack. Signed-off-by: Jacob Keller Tested-by: Tony Brelinski Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/ice/ice_main.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers/net/ethernet/intel') diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c index a89ca799109f..7606ded59a84 100644 --- a/drivers/net/ethernet/intel/ice/ice_main.c +++ b/drivers/net/ethernet/intel/ice/ice_main.c @@ -6218,6 +6218,12 @@ static void ice_rebuild(struct ice_pf *pf, enum ice_reset_req reset_type) ice_clear_pxe_mode(hw); + ret = ice_init_nvm(hw); + if (ret) { + dev_err(dev, "ice_init_nvm failed %s\n", ice_stat_str(ret)); + goto err_init_ctrlq; + } + ret = ice_get_caps(hw); if (ret) { dev_err(dev, "ice_get_caps failed %s\n", ice_stat_str(ret)); -- cgit v1.2.3