From d6a2c5c78dcbbbe9dc20ff6e126b83f088cd0501 Mon Sep 17 00:00:00 2001 From: Sara Sharon Date: Wed, 29 Jun 2016 12:08:48 +0300 Subject: iwlwifi: pcie: fix ucode load flow for a000 devices Turns out we should access TFH relative addresses. Also, the FH_UCODE_LOAD_STATUS was replaced by UREG_UCODE_LOAD_STATUS. Signed-off-by: Sara Sharon Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/iwl-fh.h | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) (limited to 'drivers/net/wireless/intel/iwlwifi/iwl-fh.h') diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-fh.h b/drivers/net/wireless/intel/iwlwifi/iwl-fh.h index 1d6f5d21a663..dd75ea7c936e 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-fh.h +++ b/drivers/net/wireless/intel/iwlwifi/iwl-fh.h @@ -77,7 +77,6 @@ */ #define FH_MEM_LOWER_BOUND (0x1000) #define FH_MEM_UPPER_BOUND (0x2000) -#define TFH_MEM_LOWER_BOUND (0xA06000) /** * Keep-Warm (KW) buffer base address. @@ -120,7 +119,7 @@ #define FH_MEM_CBBC_20_31_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xB20) #define FH_MEM_CBBC_20_31_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xB80) /* a000 TFD table address, 64 bit */ -#define TFH_TFDQ_CBB_TABLE (TFH_MEM_LOWER_BOUND + 0x1C00) +#define TFH_TFDQ_CBB_TABLE (0x1C00) /* Find TFD CB base pointer for given queue */ static inline unsigned int FH_MEM_CBBC_QUEUE(struct iwl_trans *trans, @@ -156,7 +155,7 @@ static inline unsigned int FH_MEM_CBBC_QUEUE(struct iwl_trans *trans, * In case of DRAM read address which is not aligned to 128B, the TFH will * enable transfer size which doesn't cross 64B DRAM address boundary. */ -#define TFH_TRANSFER_MODE (TFH_MEM_LOWER_BOUND + 0x1F40) +#define TFH_TRANSFER_MODE (0x1F40) #define TFH_TRANSFER_MAX_PENDING_REQ 0xc #define TFH_CHUNK_SIZE_128 BIT(8) #define TFH_CHUNK_SPLIT_MODE BIT(10) @@ -167,7 +166,7 @@ static inline unsigned int FH_MEM_CBBC_QUEUE(struct iwl_trans *trans, * the start of the TFD first TB. * In case of a DRAM Tx CMD update the TFH will update PN and Key ID */ -#define TFH_TXCMD_UPDATE_CFG (TFH_MEM_LOWER_BOUND + 0x1F48) +#define TFH_TXCMD_UPDATE_CFG (0x1F48) /* * Controls TX DMA operation * @@ -181,22 +180,22 @@ static inline unsigned int FH_MEM_CBBC_QUEUE(struct iwl_trans *trans, * set to 1 - interrupt is sent to the driver * Bit 0: Indicates the snoop configuration */ -#define TFH_SRV_DMA_CHNL0_CTRL (TFH_MEM_LOWER_BOUND + 0x1F60) +#define TFH_SRV_DMA_CHNL0_CTRL (0x1F60) #define TFH_SRV_DMA_SNOOP BIT(0) #define TFH_SRV_DMA_TO_DRIVER BIT(24) #define TFH_SRV_DMA_START BIT(31) /* Defines the DMA SRAM write start address to transfer a data block */ -#define TFH_SRV_DMA_CHNL0_SRAM_ADDR (TFH_MEM_LOWER_BOUND + 0x1F64) +#define TFH_SRV_DMA_CHNL0_SRAM_ADDR (0x1F64) /* Defines the 64bits DRAM start address to read the DMA data block from */ -#define TFH_SRV_DMA_CHNL0_DRAM_ADDR (TFH_MEM_LOWER_BOUND + 0x1F68) +#define TFH_SRV_DMA_CHNL0_DRAM_ADDR (0x1F68) /* * Defines the number of bytes to transfer from DRAM to SRAM. * Note that this register may be configured with non-dword aligned size. */ -#define TFH_SRV_DMA_CHNL0_BC (TFH_MEM_LOWER_BOUND + 0x1F70) +#define TFH_SRV_DMA_CHNL0_BC (0x1F70) /** * Rx SRAM Control and Status Registers (RSCSR) -- cgit v1.2.3