From bc5892c9ec250b36c9287bd52a74d08d75a40152 Mon Sep 17 00:00:00 2001 From: Chaoming Li Date: Fri, 21 Jan 2011 13:57:37 -0600 Subject: rtlwifi: Fix firmware upload errors When the source code from Realtek was prepared for kernel inclusion, some routines were refactored to reduce the level of indentation. This patch repairs errors introduced in that process. Signed-off-by: Chaoming Li Signed-off-by: Larry Finger Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/efuse.c | 40 ++++++++++++++++++------------------ 1 file changed, 20 insertions(+), 20 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/rtlwifi/efuse.c b/drivers/net/wireless/rtlwifi/efuse.c index b8433f3a9bc2..62876cd5c41a 100644 --- a/drivers/net/wireless/rtlwifi/efuse.c +++ b/drivers/net/wireless/rtlwifi/efuse.c @@ -726,9 +726,9 @@ static int efuse_pg_packet_read(struct ieee80211_hw *hw, u8 offset, u8 *data) } static void efuse_write_data_case1(struct ieee80211_hw *hw, u16 *efuse_addr, - u8 efuse_data, u8 offset, int *bcontinual, - u8 *write_state, struct pgpkt_struct target_pkt, - int *repeat_times, int *bresult, u8 word_en) + u8 efuse_data, u8 offset, int *bcontinual, + u8 *write_state, struct pgpkt_struct *target_pkt, + int *repeat_times, int *bresult, u8 word_en) { struct rtl_priv *rtlpriv = rtl_priv(hw); struct pgpkt_struct tmp_pkt; @@ -744,8 +744,8 @@ static void efuse_write_data_case1(struct ieee80211_hw *hw, u16 *efuse_addr, tmp_pkt.word_en = tmp_header & 0x0F; tmp_word_cnts = efuse_calculate_word_cnts(tmp_pkt.word_en); - if (tmp_pkt.offset != target_pkt.offset) { - efuse_addr = efuse_addr + (tmp_word_cnts * 2) + 1; + if (tmp_pkt.offset != target_pkt->offset) { + *efuse_addr = *efuse_addr + (tmp_word_cnts * 2) + 1; *write_state = PG_STATE_HEADER; } else { for (tmpindex = 0; tmpindex < (tmp_word_cnts * 2); tmpindex++) { @@ -756,23 +756,23 @@ static void efuse_write_data_case1(struct ieee80211_hw *hw, u16 *efuse_addr, } if (bdataempty == false) { - efuse_addr = efuse_addr + (tmp_word_cnts * 2) + 1; + *efuse_addr = *efuse_addr + (tmp_word_cnts * 2) + 1; *write_state = PG_STATE_HEADER; } else { match_word_en = 0x0F; - if (!((target_pkt.word_en & BIT(0)) | + if (!((target_pkt->word_en & BIT(0)) | (tmp_pkt.word_en & BIT(0)))) match_word_en &= (~BIT(0)); - if (!((target_pkt.word_en & BIT(1)) | + if (!((target_pkt->word_en & BIT(1)) | (tmp_pkt.word_en & BIT(1)))) match_word_en &= (~BIT(1)); - if (!((target_pkt.word_en & BIT(2)) | + if (!((target_pkt->word_en & BIT(2)) | (tmp_pkt.word_en & BIT(2)))) match_word_en &= (~BIT(2)); - if (!((target_pkt.word_en & BIT(3)) | + if (!((target_pkt->word_en & BIT(3)) | (tmp_pkt.word_en & BIT(3)))) match_word_en &= (~BIT(3)); @@ -780,7 +780,7 @@ static void efuse_write_data_case1(struct ieee80211_hw *hw, u16 *efuse_addr, badworden = efuse_word_enable_data_write( hw, *efuse_addr + 1, tmp_pkt.word_en, - target_pkt.data); + target_pkt->data); if (0x0F != (badworden & 0x0F)) { u8 reorg_offset = offset; @@ -791,26 +791,26 @@ static void efuse_write_data_case1(struct ieee80211_hw *hw, u16 *efuse_addr, } tmp_word_en = 0x0F; - if ((target_pkt.word_en & BIT(0)) ^ + if ((target_pkt->word_en & BIT(0)) ^ (match_word_en & BIT(0))) tmp_word_en &= (~BIT(0)); - if ((target_pkt.word_en & BIT(1)) ^ + if ((target_pkt->word_en & BIT(1)) ^ (match_word_en & BIT(1))) tmp_word_en &= (~BIT(1)); - if ((target_pkt.word_en & BIT(2)) ^ + if ((target_pkt->word_en & BIT(2)) ^ (match_word_en & BIT(2))) tmp_word_en &= (~BIT(2)); - if ((target_pkt.word_en & BIT(3)) ^ + if ((target_pkt->word_en & BIT(3)) ^ (match_word_en & BIT(3))) tmp_word_en &= (~BIT(3)); if ((tmp_word_en & 0x0F) != 0x0F) { *efuse_addr = efuse_get_current_size(hw); - target_pkt.offset = offset; - target_pkt.word_en = tmp_word_en; + target_pkt->offset = offset; + target_pkt->word_en = tmp_word_en; } else *bcontinual = false; *write_state = PG_STATE_HEADER; @@ -821,8 +821,8 @@ static void efuse_write_data_case1(struct ieee80211_hw *hw, u16 *efuse_addr, } } else { *efuse_addr += (2 * tmp_word_cnts) + 1; - target_pkt.offset = offset; - target_pkt.word_en = word_en; + target_pkt->offset = offset; + target_pkt->word_en = word_en; *write_state = PG_STATE_HEADER; } } @@ -938,7 +938,7 @@ static int efuse_pg_packet_write(struct ieee80211_hw *hw, efuse_write_data_case1(hw, &efuse_addr, efuse_data, offset, &bcontinual, - &write_state, target_pkt, + &write_state, &target_pkt, &repeat_times, &bresult, word_en); else -- cgit v1.2.3 From 15411c27d203e363592d30ab00803254ebe77b90 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Mon, 24 Jan 2011 23:31:43 -0500 Subject: ath5k: fix error handling in ath5k_hw_dma_stop Review spotted a problem with the error handling in ath5k_hw_dma_stop: a successful return from ath5k_hw_stop_tx_dma will be treated as an error, so we always bail out of the loop after processing a single active queue. As a result, we may not actually stop some queues during reset. Signed-off-by: Bob Copeland Acked-by: Bruno Randolf Acked-by: Nick Kossifidis Reviewed-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/dma.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath5k/dma.c b/drivers/net/wireless/ath/ath5k/dma.c index 0064be7ce5c9..21091c26a9a5 100644 --- a/drivers/net/wireless/ath/ath5k/dma.c +++ b/drivers/net/wireless/ath/ath5k/dma.c @@ -838,9 +838,9 @@ int ath5k_hw_dma_stop(struct ath5k_hw *ah) for (i = 0; i < qmax; i++) { err = ath5k_hw_stop_tx_dma(ah, i); /* -EINVAL -> queue inactive */ - if (err != -EINVAL) + if (err && err != -EINVAL) return err; } - return err; + return 0; } -- cgit v1.2.3 From c9234a662e38309d6fe272ad80e6cdb8d24654f0 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Mon, 24 Jan 2011 23:31:44 -0500 Subject: ath5k: correct endianness of frame duration The ath5k version of ieee80211_generic_frame_duration() returns an __le16 for standard modes but a cpu-endian int for turbo/half/ quarter rates. Make it always return cpu-endian values. Signed-off-by: Bob Copeland Acked-by: Bruno Randolf Acked-by: Nick Kossifidis Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/pcu.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath5k/pcu.c b/drivers/net/wireless/ath/ath5k/pcu.c index e5f2b96a4c63..a702817daf72 100644 --- a/drivers/net/wireless/ath/ath5k/pcu.c +++ b/drivers/net/wireless/ath/ath5k/pcu.c @@ -86,7 +86,7 @@ int ath5k_hw_get_frame_duration(struct ath5k_hw *ah, if (!ah->ah_bwmode) { dur = ieee80211_generic_frame_duration(sc->hw, NULL, len, rate); - return dur; + return le16_to_cpu(dur); } bitrate = rate->bitrate; @@ -265,8 +265,6 @@ static inline void ath5k_hw_write_rate_duration(struct ath5k_hw *ah) * what rate we should choose to TX ACKs. */ tx_time = ath5k_hw_get_frame_duration(ah, 10, rate); - tx_time = le16_to_cpu(tx_time); - ath5k_hw_reg_write(ah, tx_time, reg); if (!(rate->flags & IEEE80211_RATE_SHORT_PREAMBLE)) -- cgit v1.2.3 From 203043f579ece44bb30291442cd56332651dd37d Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Tue, 25 Jan 2011 14:08:40 +0100 Subject: ath9k: fix race conditions when stop device We do not kill any scheduled tasklets when stopping device, that may cause usage of resources after free. Moreover we enable interrupts in tasklet function, so we could potentially end with interrupts enabled when driver is not ready to receive them. I think patch should fix Ben's kernel crash from: http://marc.info/?l=linux-wireless&m=129438358921501&w=2 Cc: stable@kernel.org Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/init.c | 5 ----- drivers/net/wireless/ath/ath9k/main.c | 9 +++++++++ 2 files changed, 9 insertions(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index 767d8b86f1e1..b3254a3484a5 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -598,8 +598,6 @@ err_btcoex: err_queues: ath9k_hw_deinit(ah); err_hw: - tasklet_kill(&sc->intr_tq); - tasklet_kill(&sc->bcon_tasklet); kfree(ah); sc->sc_ah = NULL; @@ -807,9 +805,6 @@ static void ath9k_deinit_softc(struct ath_softc *sc) ath9k_hw_deinit(sc->sc_ah); - tasklet_kill(&sc->intr_tq); - tasklet_kill(&sc->bcon_tasklet); - kfree(sc->sc_ah); sc->sc_ah = NULL; } diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index c79c97be6cd4..ace9f066fa20 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -1309,6 +1309,9 @@ static void ath9k_stop(struct ieee80211_hw *hw) spin_lock_bh(&sc->sc_pcu_lock); + /* prevent tasklets to enable interrupts once we disable them */ + ah->imask &= ~ATH9K_INT_GLOBAL; + /* make sure h/w will not generate any interrupt * before setting the invalid flag. */ ath9k_hw_disable_interrupts(ah); @@ -1326,6 +1329,12 @@ static void ath9k_stop(struct ieee80211_hw *hw) spin_unlock_bh(&sc->sc_pcu_lock); + /* we can now sync irq and kill any running tasklets, since we already + * disabled interrupts and not holding a spin lock */ + synchronize_irq(sc->irq); + tasklet_kill(&sc->intr_tq); + tasklet_kill(&sc->bcon_tasklet); + ath9k_ps_restore(sc); sc->ps_idle = true; -- cgit v1.2.3 From ea888357ec005abffb95acee2e61aac68dff429c Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Tue, 25 Jan 2011 14:15:12 +0100 Subject: ath9k_htc: fix race conditions when stop device We do not kill any scheduled tasklets when stopping device, that may cause usage of resources after free. Disable interrupts, kill tasklets and then works in correct order. Cc: stable@kernel.org Tested-by: Sujith Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/htc_drv_init.c | 3 --- drivers/net/wireless/ath/ath9k/htc_drv_main.c | 21 +++++++++++++++------ 2 files changed, 15 insertions(+), 9 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_init.c b/drivers/net/wireless/ath/ath9k/htc_drv_init.c index 38433f9bfe59..0352f0994caa 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c @@ -142,9 +142,6 @@ static void ath9k_deinit_priv(struct ath9k_htc_priv *priv) { ath9k_htc_exit_debug(priv->ah); ath9k_hw_deinit(priv->ah); - tasklet_kill(&priv->swba_tasklet); - tasklet_kill(&priv->rx_tasklet); - tasklet_kill(&priv->tx_tasklet); kfree(priv->ah); priv->ah = NULL; } diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c index f4d576bc3ccd..6bb59958f71e 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c @@ -1025,12 +1025,6 @@ static void ath9k_htc_stop(struct ieee80211_hw *hw) int ret = 0; u8 cmd_rsp; - /* Cancel all the running timers/work .. */ - cancel_work_sync(&priv->fatal_work); - cancel_work_sync(&priv->ps_work); - cancel_delayed_work_sync(&priv->ath9k_led_blink_work); - ath9k_led_stop_brightness(priv); - mutex_lock(&priv->mutex); if (priv->op_flags & OP_INVALID) { @@ -1044,8 +1038,23 @@ static void ath9k_htc_stop(struct ieee80211_hw *hw) WMI_CMD(WMI_DISABLE_INTR_CMDID); WMI_CMD(WMI_DRAIN_TXQ_ALL_CMDID); WMI_CMD(WMI_STOP_RECV_CMDID); + + tasklet_kill(&priv->swba_tasklet); + tasklet_kill(&priv->rx_tasklet); + tasklet_kill(&priv->tx_tasklet); + skb_queue_purge(&priv->tx_queue); + mutex_unlock(&priv->mutex); + + /* Cancel all the running timers/work .. */ + cancel_work_sync(&priv->fatal_work); + cancel_work_sync(&priv->ps_work); + cancel_delayed_work_sync(&priv->ath9k_led_blink_work); + ath9k_led_stop_brightness(priv); + + mutex_lock(&priv->mutex); + /* Remove monitor interface here */ if (ah->opmode == NL80211_IFTYPE_MONITOR) { if (ath9k_htc_remove_monitor_interface(priv)) -- cgit v1.2.3 From e0ce4af920eb028f38bfd680b1d733f4c7a0b7cf Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Thu, 27 Jan 2011 04:14:03 +0000 Subject: xen: netfront: handle incoming GSO SKBs which are not CHECKSUM_PARTIAL The Linux network stack expects all GSO SKBs to have ip_summed == CHECKSUM_PARTIAL (which implies that the frame contains a partial checksum) and the Xen network ring protocol similarly expects an SKB which has GSO set to also have NETRX_csum_blank (which also implies a partial checksum). However there have been cases of buggy guests which mark a frame as GSO but do not set csum_blank. If we detect that we a receiving such a frame (which manifests as ip_summed != PARTIAL && skb_is_gso) then force the SKB to partial and recalculate the checksum, since we cannot rely on the peer having done so if they have not set csum_blank. Add an ethtool stat to track occurances of this event. Signed-off-by: Ian Campbell Cc: Jeremy Fitzhardinge Cc: David Miller Cc: xen-devel@lists.xensource.com Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller --- drivers/net/xen-netfront.c | 96 ++++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 88 insertions(+), 8 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c index 546de5749824..da1f12120346 100644 --- a/drivers/net/xen-netfront.c +++ b/drivers/net/xen-netfront.c @@ -120,6 +120,9 @@ struct netfront_info { unsigned long rx_pfn_array[NET_RX_RING_SIZE]; struct multicall_entry rx_mcl[NET_RX_RING_SIZE+1]; struct mmu_update rx_mmu[NET_RX_RING_SIZE]; + + /* Statistics */ + int rx_gso_checksum_fixup; }; struct netfront_rx_info { @@ -770,11 +773,29 @@ static RING_IDX xennet_fill_frags(struct netfront_info *np, return cons; } -static int skb_checksum_setup(struct sk_buff *skb) +static int checksum_setup(struct net_device *dev, struct sk_buff *skb) { struct iphdr *iph; unsigned char *th; int err = -EPROTO; + int recalculate_partial_csum = 0; + + /* + * A GSO SKB must be CHECKSUM_PARTIAL. However some buggy + * peers can fail to set NETRXF_csum_blank when sending a GSO + * frame. In this case force the SKB to CHECKSUM_PARTIAL and + * recalculate the partial checksum. + */ + if (skb->ip_summed != CHECKSUM_PARTIAL && skb_is_gso(skb)) { + struct netfront_info *np = netdev_priv(dev); + np->rx_gso_checksum_fixup++; + skb->ip_summed = CHECKSUM_PARTIAL; + recalculate_partial_csum = 1; + } + + /* A non-CHECKSUM_PARTIAL SKB does not require setup. */ + if (skb->ip_summed != CHECKSUM_PARTIAL) + return 0; if (skb->protocol != htons(ETH_P_IP)) goto out; @@ -788,9 +809,23 @@ static int skb_checksum_setup(struct sk_buff *skb) switch (iph->protocol) { case IPPROTO_TCP: skb->csum_offset = offsetof(struct tcphdr, check); + + if (recalculate_partial_csum) { + struct tcphdr *tcph = (struct tcphdr *)th; + tcph->check = ~csum_tcpudp_magic(iph->saddr, iph->daddr, + skb->len - iph->ihl*4, + IPPROTO_TCP, 0); + } break; case IPPROTO_UDP: skb->csum_offset = offsetof(struct udphdr, check); + + if (recalculate_partial_csum) { + struct udphdr *udph = (struct udphdr *)th; + udph->check = ~csum_tcpudp_magic(iph->saddr, iph->daddr, + skb->len - iph->ihl*4, + IPPROTO_UDP, 0); + } break; default: if (net_ratelimit()) @@ -829,13 +864,11 @@ static int handle_incoming_queue(struct net_device *dev, /* Ethernet work: Delayed to here as it peeks the header. */ skb->protocol = eth_type_trans(skb, dev); - if (skb->ip_summed == CHECKSUM_PARTIAL) { - if (skb_checksum_setup(skb)) { - kfree_skb(skb); - packets_dropped++; - dev->stats.rx_errors++; - continue; - } + if (checksum_setup(dev, skb)) { + kfree_skb(skb); + packets_dropped++; + dev->stats.rx_errors++; + continue; } dev->stats.rx_packets++; @@ -1632,12 +1665,59 @@ static void netback_changed(struct xenbus_device *dev, } } +static const struct xennet_stat { + char name[ETH_GSTRING_LEN]; + u16 offset; +} xennet_stats[] = { + { + "rx_gso_checksum_fixup", + offsetof(struct netfront_info, rx_gso_checksum_fixup) + }, +}; + +static int xennet_get_sset_count(struct net_device *dev, int string_set) +{ + switch (string_set) { + case ETH_SS_STATS: + return ARRAY_SIZE(xennet_stats); + default: + return -EINVAL; + } +} + +static void xennet_get_ethtool_stats(struct net_device *dev, + struct ethtool_stats *stats, u64 * data) +{ + void *np = netdev_priv(dev); + int i; + + for (i = 0; i < ARRAY_SIZE(xennet_stats); i++) + data[i] = *(int *)(np + xennet_stats[i].offset); +} + +static void xennet_get_strings(struct net_device *dev, u32 stringset, u8 * data) +{ + int i; + + switch (stringset) { + case ETH_SS_STATS: + for (i = 0; i < ARRAY_SIZE(xennet_stats); i++) + memcpy(data + i * ETH_GSTRING_LEN, + xennet_stats[i].name, ETH_GSTRING_LEN); + break; + } +} + static const struct ethtool_ops xennet_ethtool_ops = { .set_tx_csum = ethtool_op_set_tx_csum, .set_sg = xennet_set_sg, .set_tso = xennet_set_tso, .get_link = ethtool_op_get_link, + + .get_sset_count = xennet_get_sset_count, + .get_ethtool_stats = xennet_get_ethtool_stats, + .get_strings = xennet_get_strings, }; #ifdef CONFIG_SYSFS -- cgit v1.2.3 From 9eb710797a21fa4a9e09ae9c86c4b3ec9d291c2d Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Wed, 26 Jan 2011 00:45:42 +0000 Subject: dl2k: nulify fraginfo after unmap Patch fixes: "DMA-API: device driver tries to free an invalid DMA memory address" warning reported here: https://bugzilla.redhat.com/show_bug.cgi?id=639824 Reported-by: Frantisek Hanzlik Signed-off-by: Stanislaw Gruszka Signed-off-by: David S. Miller --- drivers/net/dl2k.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/dl2k.c b/drivers/net/dl2k.c index e1a8216ff692..c05db6046050 100644 --- a/drivers/net/dl2k.c +++ b/drivers/net/dl2k.c @@ -1753,8 +1753,6 @@ rio_close (struct net_device *dev) /* Free all the skbuffs in the queue. */ for (i = 0; i < RX_RING_SIZE; i++) { - np->rx_ring[i].status = 0; - np->rx_ring[i].fraginfo = 0; skb = np->rx_skbuff[i]; if (skb) { pci_unmap_single(np->pdev, @@ -1763,6 +1761,8 @@ rio_close (struct net_device *dev) dev_kfree_skb (skb); np->rx_skbuff[i] = NULL; } + np->rx_ring[i].status = 0; + np->rx_ring[i].fraginfo = 0; } for (i = 0; i < TX_RING_SIZE; i++) { skb = np->tx_skbuff[i]; -- cgit v1.2.3 From 5b64aa72ead6f8be488d2be7af579f0d69fb7a6e Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Thu, 27 Jan 2011 18:39:37 +0530 Subject: ath9k_hw: Fix system hang when resuming from S3/S4 The bit 6 & 7 of AR_WA (0x4004) should be enabled only for the chips that are supporting L0s functionality while resuming back from S3/S4. Enabling these bits for AR9280 is causing system hang within a few S3/S4-resume cycles. Cc: stable@kernel.org Cc: Jack Lee Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9002_hw.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath9k/ar9002_hw.c b/drivers/net/wireless/ath/ath9k/ar9002_hw.c index f8a7771faee2..f44c84ab5dce 100644 --- a/drivers/net/wireless/ath/ath9k/ar9002_hw.c +++ b/drivers/net/wireless/ath/ath9k/ar9002_hw.c @@ -426,9 +426,8 @@ static void ar9002_hw_configpcipowersave(struct ath_hw *ah, } /* WAR for ASPM system hang */ - if (AR_SREV_9280(ah) || AR_SREV_9285(ah) || AR_SREV_9287(ah)) { + if (AR_SREV_9285(ah) || AR_SREV_9287(ah)) val |= (AR_WA_BIT6 | AR_WA_BIT7); - } if (AR_SREV_9285E_20(ah)) val |= AR_WA_BIT23; -- cgit v1.2.3 From c7c1806098752c1f46943d8db2c69aff07f5d4bc Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Thu, 27 Jan 2011 18:39:38 +0530 Subject: ath9k: Fix power save usage count imbalance on deinit While unloading the driver, the ps_usecount is incremented before configuring gpio registers in deinit_device. But it is failed to restore the ps_usecount after that. The problem is that the chip is forcibly moved to FULL SLEEP by radio_disable when mac80211 is reporting as idle though ps_usecount is not zero. This patch retores ps_usecount properly and ensures that the chip is always moved to full sleep only if ps usage count is zero which also helps in debugging deadbeef on multivif case. And also fixes the following warning. ath: DMA failed to stop in 10 ms AR_CR=0xdeadbeef AR_DIAG_SW=0xdeadbeef ath: Could not stop RX, we could be confusing the DMA engine when we start RX up ------------[ cut here ]------------ WARNING: at drivers/net/wireless/ath/ath9k/recv.c:536 ath_stoprecv+0xf4/0x100 [ath9k]() Cc: stable@kernel.org Cc: Paul Stewart Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/init.c | 2 ++ drivers/net/wireless/ath/ath9k/main.c | 2 -- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index b3254a3484a5..087a6a95edd5 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -819,6 +819,8 @@ void ath9k_deinit_device(struct ath_softc *sc) wiphy_rfkill_stop_polling(sc->hw->wiphy); ath_deinit_leds(sc); + ath9k_ps_restore(sc); + for (i = 0; i < sc->num_sec_wiphy; i++) { struct ath_wiphy *aphy = sc->sec_wiphy[i]; if (aphy == NULL) diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index ace9f066fa20..568f7be2ec75 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -953,8 +953,6 @@ void ath_radio_disable(struct ath_softc *sc, struct ieee80211_hw *hw) spin_unlock_bh(&sc->sc_pcu_lock); ath9k_ps_restore(sc); - - ath9k_setpower(sc, ATH9K_PM_FULL_SLEEP); } int ath_reset(struct ath_softc *sc, bool retry_tx) -- cgit v1.2.3 From 31dd272e8cbb32ef31a411492cc642c363bb54b9 Mon Sep 17 00:00:00 2001 From: Yevgeny Petrilin Date: Tue, 7 Dec 2010 14:23:45 +0000 Subject: mlx4_core: Add ConnectX-3 device IDs ...as already added to pci.ids. Signed-off-by: Yevgeny Petrilin Signed-off-by: Roland Dreier --- drivers/net/mlx4/main.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/mlx4/main.c b/drivers/net/mlx4/main.c index 4ffdc18fcb8a..2765a3ce9c24 100644 --- a/drivers/net/mlx4/main.c +++ b/drivers/net/mlx4/main.c @@ -1286,6 +1286,21 @@ static DEFINE_PCI_DEVICE_TABLE(mlx4_pci_table) = { { PCI_VDEVICE(MELLANOX, 0x6764) }, /* MT26468 ConnectX EN 10GigE PCIe gen2*/ { PCI_VDEVICE(MELLANOX, 0x6746) }, /* MT26438 ConnectX EN 40GigE PCIe gen2 5GT/s */ { PCI_VDEVICE(MELLANOX, 0x676e) }, /* MT26478 ConnectX2 40GigE PCIe gen2 */ + { PCI_VDEVICE(MELLANOX, 0x1002) }, /* MT25400 Family [ConnectX-2 Virtual Function] */ + { PCI_VDEVICE(MELLANOX, 0x1003) }, /* MT27500 Family [ConnectX-3] */ + { PCI_VDEVICE(MELLANOX, 0x1004) }, /* MT27500 Family [ConnectX-3 Virtual Function] */ + { PCI_VDEVICE(MELLANOX, 0x1005) }, /* MT27510 Family */ + { PCI_VDEVICE(MELLANOX, 0x1006) }, /* MT27511 Family */ + { PCI_VDEVICE(MELLANOX, 0x1007) }, /* MT27520 Family */ + { PCI_VDEVICE(MELLANOX, 0x1008) }, /* MT27521 Family */ + { PCI_VDEVICE(MELLANOX, 0x1009) }, /* MT27530 Family */ + { PCI_VDEVICE(MELLANOX, 0x100a) }, /* MT27531 Family */ + { PCI_VDEVICE(MELLANOX, 0x100b) }, /* MT27540 Family */ + { PCI_VDEVICE(MELLANOX, 0x100c) }, /* MT27541 Family */ + { PCI_VDEVICE(MELLANOX, 0x100d) }, /* MT27550 Family */ + { PCI_VDEVICE(MELLANOX, 0x100e) }, /* MT27551 Family */ + { PCI_VDEVICE(MELLANOX, 0x100f) }, /* MT27560 Family */ + { PCI_VDEVICE(MELLANOX, 0x1010) }, /* MT27561 Family */ { 0, } }; -- cgit v1.2.3 From c128df731862e90ec9292c5d3eb264ac73b522b8 Mon Sep 17 00:00:00 2001 From: Oliver Hartkopp Date: Sun, 30 Jan 2011 01:09:37 -0800 Subject: slcan: fix referenced website in Kconfig help text Fix the referenced project website to www.mictronics.de in the Kconfig help text for the slcan driver. Signed-off-by: Oliver Hartkopp Signed-off-by: David S. Miller --- drivers/net/can/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig index 986195eaa57c..5dec456fd4a4 100644 --- a/drivers/net/can/Kconfig +++ b/drivers/net/can/Kconfig @@ -23,7 +23,7 @@ config CAN_SLCAN As only the sending and receiving of CAN frames is implemented, this driver should work with the (serial/USB) CAN hardware from: - www.canusb.com / www.can232.com / www.mictronic.com / www.canhack.de + www.canusb.com / www.can232.com / www.mictronics.de / www.canhack.de Userspace tools to attach the SLCAN line discipline (slcan_attach, slcand) can be found in the can-utils at the SocketCAN SVN, see -- cgit v1.2.3 From 81a3516c4c127a75cc69f03d2a858f55a56eda1e Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Sun, 30 Jan 2011 04:14:48 +0000 Subject: bnx2x: Remove setting XAUI low-power for BCM8073 A rare link issue with the BCM8073 PHY may occur due to setting XAUI low power mode, while the PHY microcode already does that. The fix is not to set set XAUI low power mode for this PHY. Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x/bnx2x_link.c | 44 ------------------------------------------ 1 file changed, 44 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c index 7160ec51093e..53a95a2c5e02 100644 --- a/drivers/net/bnx2x/bnx2x_link.c +++ b/drivers/net/bnx2x/bnx2x_link.c @@ -3948,48 +3948,6 @@ static u8 bnx2x_8073_8727_external_rom_boot(struct bnx2x *bp, return rc; } -static void bnx2x_8073_set_xaui_low_power_mode(struct bnx2x *bp, - struct bnx2x_phy *phy) -{ - u16 val; - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_8073_CHIP_REV, &val); - - if (val == 0) { - /* Mustn't set low power mode in 8073 A0 */ - return; - } - - /* Disable PLL sequencer (use read-modify-write to clear bit 13) */ - bnx2x_cl45_read(bp, phy, - MDIO_XS_DEVAD, MDIO_XS_PLL_SEQUENCER, &val); - val &= ~(1<<13); - bnx2x_cl45_write(bp, phy, - MDIO_XS_DEVAD, MDIO_XS_PLL_SEQUENCER, val); - - /* PLL controls */ - bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x805E, 0x1077); - bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x805D, 0x0000); - bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x805C, 0x030B); - bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x805B, 0x1240); - bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x805A, 0x2490); - - /* Tx Controls */ - bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x80A7, 0x0C74); - bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x80A6, 0x9041); - bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x80A5, 0x4640); - - /* Rx Controls */ - bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x80FE, 0x01C4); - bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x80FD, 0x9249); - bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x80FC, 0x2015); - - /* Enable PLL sequencer (use read-modify-write to set bit 13) */ - bnx2x_cl45_read(bp, phy, MDIO_XS_DEVAD, MDIO_XS_PLL_SEQUENCER, &val); - val |= (1<<13); - bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, MDIO_XS_PLL_SEQUENCER, val); -} - /******************************************************************/ /* BCM8073 PHY SECTION */ /******************************************************************/ @@ -4148,8 +4106,6 @@ static u8 bnx2x_8073_config_init(struct bnx2x_phy *phy, bnx2x_8073_set_pause_cl37(params, phy, vars); - bnx2x_8073_set_xaui_low_power_mode(bp, phy); - bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_M8051_MSGOUT_REG, &tmp1); -- cgit v1.2.3 From 53eda06def26862c0a3c57348c71a240429fbaac Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Sun, 30 Jan 2011 04:14:55 +0000 Subject: bnx2x: Fix LED blink rate on BCM84823 Fix blink rate of activity LED of the BCM84823 on 10G link Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x/bnx2x_link.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c index 53a95a2c5e02..b1c667a0031e 100644 --- a/drivers/net/bnx2x/bnx2x_link.c +++ b/drivers/net/bnx2x/bnx2x_link.c @@ -6475,6 +6475,18 @@ static void bnx2x_848xx_set_link_led(struct bnx2x_phy *phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_8481_LED1_MASK, 0x80); + + /* Tell LED3 to blink on source */ + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LINK_SIGNAL, + &val); + val &= ~(7<<6); + val |= (1<<6); /* A83B[8:6]= 1 */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LINK_SIGNAL, + val); } break; } -- cgit v1.2.3 From c8e64df48a814be1e7066f07b4f709ff63727abf Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Sun, 30 Jan 2011 04:15:00 +0000 Subject: bnx2x: Fix port swap for BCM8073 Fix link on BCM57712 + BCM8073 when port swap is enabled. Common PHY reset was done on the wrong port. Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x/bnx2x_link.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c index b1c667a0031e..dd1210fddfff 100644 --- a/drivers/net/bnx2x/bnx2x_link.c +++ b/drivers/net/bnx2x/bnx2x_link.c @@ -7688,10 +7688,13 @@ static u8 bnx2x_8073_common_init_phy(struct bnx2x *bp, struct bnx2x_phy phy[PORT_MAX]; struct bnx2x_phy *phy_blk[PORT_MAX]; u16 val; - s8 port; + s8 port = 0; s8 port_of_path = 0; - - bnx2x_ext_phy_hw_reset(bp, 0); + u32 swap_val, swap_override; + swap_val = REG_RD(bp, NIG_REG_PORT_SWAP); + swap_override = REG_RD(bp, NIG_REG_STRAP_OVERRIDE); + port ^= (swap_val && swap_override); + bnx2x_ext_phy_hw_reset(bp, port); /* PART1 - Reset both phys */ for (port = PORT_MAX - 1; port >= PORT_0; port--) { u32 shmem_base, shmem2_base; -- cgit v1.2.3 From 5866df6d07cf22749557a0804253c8fee9e87f06 Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Sun, 30 Jan 2011 04:15:07 +0000 Subject: bnx2x: Fix potential link loss in multi-function mode All functions on a port should be set to take the MDC/MDIO lock to avoid contention on the bus Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x/bnx2x_main.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/bnx2x/bnx2x_main.c b/drivers/net/bnx2x/bnx2x_main.c index 8cdcf5b39d1e..404d93e6df21 100644 --- a/drivers/net/bnx2x/bnx2x_main.c +++ b/drivers/net/bnx2x/bnx2x_main.c @@ -5296,10 +5296,6 @@ static int bnx2x_init_hw_common(struct bnx2x *bp, u32 load_code) } } - bp->port.need_hw_lock = bnx2x_hw_lock_required(bp, - bp->common.shmem_base, - bp->common.shmem2_base); - bnx2x_setup_fan_failure_detection(bp); /* clear PXP2 attentions */ @@ -5503,9 +5499,6 @@ static int bnx2x_init_hw_port(struct bnx2x *bp) bnx2x_init_block(bp, MCP_BLOCK, init_stage); bnx2x_init_block(bp, DMAE_BLOCK, init_stage); - bp->port.need_hw_lock = bnx2x_hw_lock_required(bp, - bp->common.shmem_base, - bp->common.shmem2_base); if (bnx2x_fan_failure_det_req(bp, bp->common.shmem_base, bp->common.shmem2_base, port)) { u32 reg_addr = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 : @@ -8379,6 +8372,17 @@ static void __devinit bnx2x_get_port_hwinfo(struct bnx2x *bp) (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN)) bp->mdio.prtad = XGXS_EXT_PHY_ADDR(ext_phy_config); + + /* + * Check if hw lock is required to access MDC/MDIO bus to the PHY(s) + * In MF mode, it is set to cover self test cases + */ + if (IS_MF(bp)) + bp->port.need_hw_lock = 1; + else + bp->port.need_hw_lock = bnx2x_hw_lock_required(bp, + bp->common.shmem_base, + bp->common.shmem2_base); } static void __devinit bnx2x_get_mac_hwinfo(struct bnx2x *bp) -- cgit v1.2.3 From c4c93106741bbf61ecd05a2a835af8e3bf31c1bd Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Sun, 30 Jan 2011 04:15:13 +0000 Subject: bnx2x: Update bnx2x version to 1.62.00-5 Update bnx2x version to 1.62.00-5 Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x/bnx2x.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/bnx2x/bnx2x.h b/drivers/net/bnx2x/bnx2x.h index 8e4183717d91..653c62475cb6 100644 --- a/drivers/net/bnx2x/bnx2x.h +++ b/drivers/net/bnx2x/bnx2x.h @@ -22,8 +22,8 @@ * (you will need to reboot afterwards) */ /* #define BNX2X_STOP_ON_ERROR */ -#define DRV_MODULE_VERSION "1.62.00-4" -#define DRV_MODULE_RELDATE "2011/01/18" +#define DRV_MODULE_VERSION "1.62.00-5" +#define DRV_MODULE_RELDATE "2011/01/30" #define BNX2X_BC_VER 0x040200 #define BNX2X_MULTI_QUEUE -- cgit v1.2.3 From 9b00b4157f7b3265de291ac8979a5f1611ce64ab Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Sun, 30 Jan 2011 11:29:47 +0100 Subject: wl12xx: fix use after free When DEBUG_SPI is included in the debug log level wl1271_spi_reset() will dump the already freed memory instead of the SPI buffer. This bug was spotted by the semantic patch tool coccinelle using the script found at scripts/coccinelle/free/kfree.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/ Signed-off-by: Mathias Krause Signed-off-by: John W. Linville --- drivers/net/wireless/wl12xx/spi.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/wl12xx/spi.c b/drivers/net/wireless/wl12xx/spi.c index 46714910f98c..7145ea543783 100644 --- a/drivers/net/wireless/wl12xx/spi.c +++ b/drivers/net/wireless/wl12xx/spi.c @@ -110,9 +110,8 @@ static void wl1271_spi_reset(struct wl1271 *wl) spi_message_add_tail(&t, &m); spi_sync(wl_to_spi(wl), &m); - kfree(cmd); - wl1271_dump(DEBUG_SPI, "spi reset -> ", cmd, WSPI_INIT_CMD_LEN); + kfree(cmd); } static void wl1271_spi_init(struct wl1271 *wl) -- cgit v1.2.3 From cc09b5f6466528867b280f6eb4077311aa099588 Mon Sep 17 00:00:00 2001 From: Chuck Ebbert Date: Mon, 31 Jan 2011 05:44:07 +0000 Subject: CAN: softing driver depends on IOMEM Without this dependency the softing driver will be buildable on s390, where it fails. Signed-Off-By: Chuck Ebbert Acked-by: Kurt Van Dijck Signed-off-by: David S. Miller --- drivers/net/can/softing/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/can/softing/Kconfig b/drivers/net/can/softing/Kconfig index 92bd6bdde5e3..8ba81b3ddd90 100644 --- a/drivers/net/can/softing/Kconfig +++ b/drivers/net/can/softing/Kconfig @@ -1,6 +1,6 @@ config CAN_SOFTING tristate "Softing Gmbh CAN generic support" - depends on CAN_DEV + depends on CAN_DEV && HAS_IOMEM ---help--- Support for CAN cards from Softing Gmbh & some cards from Vector Gmbh. -- cgit v1.2.3 From 785e8cc39baf31d5c18a2d198ded03a003c9c190 Mon Sep 17 00:00:00 2001 From: Ken Kawasaki Date: Sun, 30 Jan 2011 11:16:16 +0000 Subject: axnet_cs: reduce delay time at ei_rx_overrun axnet_cs: mdelay of 10ms is too long at ei_rx_overrun. It should be reduced to 2ms. Signed-off-by: Ken Kawasaki Signed-off-by: David S. Miller --- drivers/net/pcmcia/axnet_cs.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c index 1f42f6ac8551..d3cb77205863 100644 --- a/drivers/net/pcmcia/axnet_cs.c +++ b/drivers/net/pcmcia/axnet_cs.c @@ -1488,12 +1488,10 @@ static void ei_rx_overrun(struct net_device *dev) /* * Wait a full Tx time (1.2ms) + some guard time, NS says 1.6ms total. - * Early datasheets said to poll the reset bit, but now they say that - * it "is not a reliable indicator and subsequently should be ignored." - * We wait at least 10ms. + * We wait at least 2ms. */ - mdelay(10); + mdelay(2); /* * Reset RBCR[01] back to zero as per magic incantation. -- cgit v1.2.3 From fca540ab5f4718c6133f71f7be1793066008bf89 Mon Sep 17 00:00:00 2001 From: Stefan Weil Date: Mon, 31 Jan 2011 20:56:54 -0800 Subject: enc28j60: Fix reading of transmit status vector This error was reported by cppcheck: drivers/net/enc28j60.c:815: error: Using sizeof for array given as function argument returns the size of pointer. The original code reads 4 or 8 bytes instead of TSV_SIZE (= 100) bytes. I just fixed the code, but did not run any tests. Signed-off-by: Stefan Weil Signed-off-by: David S. Miller --- drivers/net/enc28j60.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c index 112c5aa9af7f..907b05a1c659 100644 --- a/drivers/net/enc28j60.c +++ b/drivers/net/enc28j60.c @@ -812,7 +812,7 @@ static void enc28j60_read_tsv(struct enc28j60_net *priv, u8 tsv[TSV_SIZE]) if (netif_msg_hw(priv)) printk(KERN_DEBUG DRV_NAME ": reading TSV at addr:0x%04x\n", endptr + 1); - enc28j60_mem_read(priv, endptr + 1, sizeof(tsv), tsv); + enc28j60_mem_read(priv, endptr + 1, TSV_SIZE, tsv); } static void enc28j60_dump_tsv(struct enc28j60_net *priv, const char *msg, -- cgit v1.2.3 From 479600777bb588724d044815415f7d708d06644b Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Mon, 31 Jan 2011 13:25:29 +0530 Subject: ath9k: Fix memory leak due to failed PAPRD frames free the skb's when the Tx of PAPRD frames fails and also add a debug message indicating that. Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/main.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 568f7be2ec75..9040c2ff1909 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -325,6 +325,8 @@ static bool ath_paprd_send_frame(struct ath_softc *sc, struct sk_buff *skb, int { struct ieee80211_hw *hw = sc->hw; struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); + struct ath_hw *ah = sc->sc_ah; + struct ath_common *common = ath9k_hw_common(ah); struct ath_tx_control txctl; int time_left; @@ -342,8 +344,12 @@ static bool ath_paprd_send_frame(struct ath_softc *sc, struct sk_buff *skb, int init_completion(&sc->paprd_complete); sc->paprd_pending = true; txctl.paprd = BIT(chain); - if (ath_tx_start(hw, skb, &txctl) != 0) + + if (ath_tx_start(hw, skb, &txctl) != 0) { + ath_dbg(common, ATH_DBG_XMIT, "PAPRD TX failed\n"); + dev_kfree_skb_any(skb); return false; + } time_left = wait_for_completion_timeout(&sc->paprd_complete, msecs_to_jiffies(ATH_PAPRD_TIMEOUT)); -- cgit v1.2.3 From 48bc9a2ccec98de007117495123bba78a4bbdd9c Mon Sep 17 00:00:00 2001 From: Stefan Weil Date: Fri, 28 Jan 2011 12:30:17 +0000 Subject: vxge: Fix wrong boolean operator This error is reported by cppcheck: drivers/net/vxge/vxge-config.c:3693: warning: Mutual exclusion over || always evaluates to true. Did you intend to use && instead? It looks like cppcheck is correct, so fix this. No test was run. Cc: Ramkrishna Vepa Cc: Sivakumar Subramani Cc: Sreenivasa Honnur Cc: Jon Mason Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Stefan Weil Acked-by: Ram Vepa Signed-off-by: David S. Miller --- drivers/net/vxge/vxge-config.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/vxge/vxge-config.c b/drivers/net/vxge/vxge-config.c index 01c05f53e2f9..228d4f7a58af 100644 --- a/drivers/net/vxge/vxge-config.c +++ b/drivers/net/vxge/vxge-config.c @@ -3690,7 +3690,7 @@ __vxge_hw_vpath_rts_table_get(struct __vxge_hw_vpath_handle *vp, if (status != VXGE_HW_OK) goto exit; - if ((rts_table != VXGE_HW_RTS_ACCESS_STEER_CTRL_DATA_STRUCT_SEL_DA) || + if ((rts_table != VXGE_HW_RTS_ACCESS_STEER_CTRL_DATA_STRUCT_SEL_DA) && (rts_table != VXGE_HW_RTS_ACS_STEER_CTRL_DATA_STRUCT_SEL_RTH_MULTI_IT)) *data1 = 0; -- cgit v1.2.3 From f97f3057fd2febbd7f34a60f09a2cb9cef8bf403 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 1 Feb 2011 13:19:07 -0800 Subject: depca: Fix warnings Replace the rather weird use of ++ with + 1 as the value is being assigned Signed-off-by: Alan Cox --- drivers/net/depca.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/depca.c b/drivers/net/depca.c index 1b48b68ad4fd..8b0084d17c8c 100644 --- a/drivers/net/depca.c +++ b/drivers/net/depca.c @@ -1094,7 +1094,7 @@ static int depca_rx(struct net_device *dev) } } /* Change buffer ownership for this last frame, back to the adapter */ - for (; lp->rx_old != entry; lp->rx_old = (++lp->rx_old) & lp->rxRingMask) { + for (; lp->rx_old != entry; lp->rx_old = (lp->rx_old + 1) & lp->rxRingMask) { writel(readl(&lp->rx_ring[lp->rx_old].base) | R_OWN, &lp->rx_ring[lp->rx_old].base); } writel(readl(&lp->rx_ring[entry].base) | R_OWN, &lp->rx_ring[entry].base); @@ -1103,7 +1103,7 @@ static int depca_rx(struct net_device *dev) /* ** Update entry information */ - lp->rx_new = (++lp->rx_new) & lp->rxRingMask; + lp->rx_new = (lp->rx_new + 1) & lp->rxRingMask; } return 0; @@ -1148,7 +1148,7 @@ static int depca_tx(struct net_device *dev) } /* Update all the pointers */ - lp->tx_old = (++lp->tx_old) & lp->txRingMask; + lp->tx_old = (lp->tx_old + 1) & lp->txRingMask; } return 0; -- cgit v1.2.3 From d9c8f498c3b41e686d3306dcf01d95941fcc6b48 Mon Sep 17 00:00:00 2001 From: Vladislav Zolotarov Date: Tue, 1 Feb 2011 14:05:30 -0800 Subject: bnx2x: multicasts in NPAR mode The chip was erroneously configured to accept all multicast frames in a normal (none-promisc) rx mode both on the RSS and on the FCoE L2 rings when in an NPAR mode. This caused packet duplication for every received multicast frame in this mode. Signed-off-by: Vladislav Zolotarov Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x/bnx2x_main.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/bnx2x/bnx2x_main.c b/drivers/net/bnx2x/bnx2x_main.c index 404d93e6df21..f40740e68ea5 100644 --- a/drivers/net/bnx2x/bnx2x_main.c +++ b/drivers/net/bnx2x/bnx2x_main.c @@ -2301,15 +2301,10 @@ static void bnx2x_rxq_set_mac_filters(struct bnx2x *bp, u16 cl_id, u32 filters) /* accept matched ucast */ drop_all_ucast = 0; } - if (filters & BNX2X_ACCEPT_MULTICAST) { + if (filters & BNX2X_ACCEPT_MULTICAST) /* accept matched mcast */ drop_all_mcast = 0; - if (IS_MF_SI(bp)) - /* since mcast addresses won't arrive with ovlan, - * fw needs to accept all of them in - * switch-independent mode */ - accp_all_mcast = 1; - } + if (filters & BNX2X_ACCEPT_ALL_UNICAST) { /* accept all mcast */ drop_all_ucast = 0; -- cgit v1.2.3 From a89e828397abbefdc5c3b707521f6b73471b43c8 Mon Sep 17 00:00:00 2001 From: Ajit Khaparde Date: Tue, 1 Feb 2011 15:41:13 -0800 Subject: be2net: fix a crash seen during insmod/rmmod test While running insmod/rmood in a loop, an unnecessary netif_stop_queue causes the system to crash. Remove the netif_stop_queue call and netif_start_queue in the link status update path. Signed-off-by: Ajit Khaparde Signed-off-by: David S. Miller --- drivers/net/benet/be_main.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c index de40d3b7152f..9aaf1ef704e9 100644 --- a/drivers/net/benet/be_main.c +++ b/drivers/net/benet/be_main.c @@ -312,11 +312,9 @@ void be_link_status_update(struct be_adapter *adapter, bool link_up) if (adapter->link_up != link_up) { adapter->link_speed = -1; if (link_up) { - netif_start_queue(netdev); netif_carrier_on(netdev); printk(KERN_INFO "%s: Link up\n", netdev->name); } else { - netif_stop_queue(netdev); netif_carrier_off(netdev); printk(KERN_INFO "%s: Link down\n", netdev->name); } -- cgit v1.2.3 From 9b6cefd6593c2b661e0052d53f2fff6fc5463975 Mon Sep 17 00:00:00 2001 From: Ajit Khaparde Date: Tue, 1 Feb 2011 15:41:59 -0800 Subject: be2net: remove netif_stop_queue being called before register_netdev. It is illegal to call netif_stop_queue before register_netdev. Signed-off-by: Ajit Khaparde Signed-off-by: David S. Miller --- drivers/net/benet/be_main.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c index 9aaf1ef704e9..28a32a6c8bf1 100644 --- a/drivers/net/benet/be_main.c +++ b/drivers/net/benet/be_main.c @@ -2626,8 +2626,6 @@ static void be_netdev_init(struct net_device *netdev) netif_napi_add(netdev, &adapter->tx_eq.napi, be_poll_tx_mcc, BE_NAPI_WEIGHT); - - netif_stop_queue(netdev); } static void be_unmap_pci_bars(struct be_adapter *adapter) -- cgit v1.2.3 From ff458edc0c5ec42b299547fb7eb9790a4aecc632 Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Mon, 31 Jan 2011 13:56:03 -0800 Subject: iwlagn: overwrite EEPROM chain setting for 6250 devices 6250 2x2 devices have 2 tx chain and 2 rx chain. For some reason, the EEPROM contain incorrect information and indicate it only has single tx chain. overwrite it with .cfg parameter to make sure both chain 'A' and chain 'B' can be used for transmit and receive Signed-off-by: Wey-Yi Guy Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-6000.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c index af505bcd7ae0..ef36aff1bb43 100644 --- a/drivers/net/wireless/iwlwifi/iwl-6000.c +++ b/drivers/net/wireless/iwlwifi/iwl-6000.c @@ -681,6 +681,8 @@ struct iwl_cfg iwl6000i_2bg_cfg = { .fw_name_pre = IWL6050_FW_PRE, \ .ucode_api_max = IWL6050_UCODE_API_MAX, \ .ucode_api_min = IWL6050_UCODE_API_MIN, \ + .valid_tx_ant = ANT_AB, /* .cfg overwrite */ \ + .valid_rx_ant = ANT_AB, /* .cfg overwrite */ \ .ops = &iwl6050_ops, \ .eeprom_ver = EEPROM_6050_EEPROM_VERSION, \ .eeprom_calib_ver = EEPROM_6050_TX_POWER_VERSION, \ -- cgit v1.2.3 From 94dde7e451fa70749fa68df3d70e4b20debe96a6 Mon Sep 17 00:00:00 2001 From: Chuck Ebbert Date: Wed, 2 Feb 2011 15:02:08 -0800 Subject: atl1c: Add missing PCI device ID Commit 8f574b35f22fbb9b5e5f1d11ad6b55b6f35f4533 ("atl1c: Add AR8151 v2 support and change L0s/L1 routine") added support for a new adapter but failed to add it to the PCI device table. Signed-Off-By: Chuck Ebbert Signed-off-by: David S. Miller --- drivers/net/atl1c/atl1c_main.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/atl1c/atl1c_main.c b/drivers/net/atl1c/atl1c_main.c index a699bbf20eb5..3824382faecc 100644 --- a/drivers/net/atl1c/atl1c_main.c +++ b/drivers/net/atl1c/atl1c_main.c @@ -48,6 +48,7 @@ static DEFINE_PCI_DEVICE_TABLE(atl1c_pci_tbl) = { {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATHEROS_L2C_B)}, {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATHEROS_L2C_B2)}, {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATHEROS_L1D)}, + {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATHEROS_L1D_2_0)}, /* required last entry */ { 0 } }; -- cgit v1.2.3 From 4d048aac990d587c81fc1002e28502e6f95371ee Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Thu, 3 Feb 2011 21:14:01 +0100 Subject: wireless, wl1251: Fix potential NULL pointer dereference in wl1251_op_bss_info_changed() In drivers/net/wireless/wl1251/main.c:wl1251_op_bss_info_changed() we make a call to ieee80211_beacon_get() which may return NULL, but we do not check the return value before dereferencing the pointer. Signed-off-by: Jesper Juhl Signed-off-by: John W. Linville --- drivers/net/wireless/wl1251/main.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/wl1251/main.c b/drivers/net/wireless/wl1251/main.c index 012e1a4016fe..40372bac9482 100644 --- a/drivers/net/wireless/wl1251/main.c +++ b/drivers/net/wireless/wl1251/main.c @@ -1039,6 +1039,9 @@ static void wl1251_op_bss_info_changed(struct ieee80211_hw *hw, if (changed & BSS_CHANGED_BEACON) { beacon = ieee80211_beacon_get(hw, vif); + if (!beacon) + goto out_sleep; + ret = wl1251_cmd_template_set(wl, CMD_BEACON, beacon->data, beacon->len); -- cgit v1.2.3 From 9690c636ac118b6662f28308bee817343d9932d8 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 3 Feb 2011 16:12:50 -0800 Subject: niu: Fix races between up/down and get_stats. As reported by Flavio Leitner, there is no synchronization to protect NIU's get_stats method from seeing a NULL pointer in either np->rx_rings or np->tx_rings. In fact, as far as ->ndo_get_stats is concerned, these values are set completely asynchronously. Flavio attempted to fix this using a RW semaphore, which in fact works most of the time. However, dev_get_stats() can be invoked from non-sleepable contexts in some cases, so this fix doesn't work in all cases. So instead, control the visibility of the np->{rx,tx}_ring pointers when the device is being brough up, and use properties of the device down sequence to our advantage. In niu_get_stats(), return immediately if netif_running() is false. The device shutdown sequence first marks the device as not running (by clearing the __LINK_STATE_START bit), then it performans a synchronize_rcu() (in dev_deactive_many()), and then finally it invokes the driver ->ndo_stop() method. This guarentees that all invocations of niu_get_stats() either see netif_running() as false, or they see the channel pointers before ->ndo_stop() clears them out. If netif_running() is true, protect against startup races by loading the np->{rx,tx}_rings pointer into a local variable, and punting if it is NULL. Use ACCESS_ONCE to prevent the compiler from reloading the pointer on us. Also, during open, control the order in which the pointers and the ring counts become visible globally using SMP write memory barriers. We make sure the np->num_{rx,tx}_rings value is stable and visible before np->{rx,tx}_rings is. Such visibility control is not necessary on the niu_free_channels() side because of the RCU sequencing that happens during device down as described above. We are always guarenteed that all niu_get_stats calls are finished, or will see netif_running() false, by the time ->ndo_stop is invoked. Reported-by: Flavio Leitner Signed-off-by: David S. Miller --- drivers/net/niu.c | 61 ++++++++++++++++++++++++++++++++++++++++--------------- 1 file changed, 45 insertions(+), 16 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/niu.c b/drivers/net/niu.c index 2541321bad82..9fb59d3f9c92 100644 --- a/drivers/net/niu.c +++ b/drivers/net/niu.c @@ -4489,6 +4489,9 @@ static int niu_alloc_channels(struct niu *np) { struct niu_parent *parent = np->parent; int first_rx_channel, first_tx_channel; + int num_rx_rings, num_tx_rings; + struct rx_ring_info *rx_rings; + struct tx_ring_info *tx_rings; int i, port, err; port = np->port; @@ -4498,18 +4501,21 @@ static int niu_alloc_channels(struct niu *np) first_tx_channel += parent->txchan_per_port[i]; } - np->num_rx_rings = parent->rxchan_per_port[port]; - np->num_tx_rings = parent->txchan_per_port[port]; + num_rx_rings = parent->rxchan_per_port[port]; + num_tx_rings = parent->txchan_per_port[port]; - netif_set_real_num_rx_queues(np->dev, np->num_rx_rings); - netif_set_real_num_tx_queues(np->dev, np->num_tx_rings); - - np->rx_rings = kcalloc(np->num_rx_rings, sizeof(struct rx_ring_info), - GFP_KERNEL); + rx_rings = kcalloc(num_rx_rings, sizeof(struct rx_ring_info), + GFP_KERNEL); err = -ENOMEM; - if (!np->rx_rings) + if (!rx_rings) goto out_err; + np->num_rx_rings = num_rx_rings; + smp_wmb(); + np->rx_rings = rx_rings; + + netif_set_real_num_rx_queues(np->dev, num_rx_rings); + for (i = 0; i < np->num_rx_rings; i++) { struct rx_ring_info *rp = &np->rx_rings[i]; @@ -4538,12 +4544,18 @@ static int niu_alloc_channels(struct niu *np) return err; } - np->tx_rings = kcalloc(np->num_tx_rings, sizeof(struct tx_ring_info), - GFP_KERNEL); + tx_rings = kcalloc(num_tx_rings, sizeof(struct tx_ring_info), + GFP_KERNEL); err = -ENOMEM; - if (!np->tx_rings) + if (!tx_rings) goto out_err; + np->num_tx_rings = num_tx_rings; + smp_wmb(); + np->tx_rings = tx_rings; + + netif_set_real_num_tx_queues(np->dev, num_tx_rings); + for (i = 0; i < np->num_tx_rings; i++) { struct tx_ring_info *rp = &np->tx_rings[i]; @@ -6246,11 +6258,17 @@ static void niu_sync_mac_stats(struct niu *np) static void niu_get_rx_stats(struct niu *np) { unsigned long pkts, dropped, errors, bytes; + struct rx_ring_info *rx_rings; int i; pkts = dropped = errors = bytes = 0; + + rx_rings = ACCESS_ONCE(np->rx_rings); + if (!rx_rings) + goto no_rings; + for (i = 0; i < np->num_rx_rings; i++) { - struct rx_ring_info *rp = &np->rx_rings[i]; + struct rx_ring_info *rp = &rx_rings[i]; niu_sync_rx_discard_stats(np, rp, 0); @@ -6259,6 +6277,8 @@ static void niu_get_rx_stats(struct niu *np) dropped += rp->rx_dropped; errors += rp->rx_errors; } + +no_rings: np->dev->stats.rx_packets = pkts; np->dev->stats.rx_bytes = bytes; np->dev->stats.rx_dropped = dropped; @@ -6268,16 +6288,24 @@ static void niu_get_rx_stats(struct niu *np) static void niu_get_tx_stats(struct niu *np) { unsigned long pkts, errors, bytes; + struct tx_ring_info *tx_rings; int i; pkts = errors = bytes = 0; + + tx_rings = ACCESS_ONCE(np->tx_rings); + if (!tx_rings) + goto no_rings; + for (i = 0; i < np->num_tx_rings; i++) { - struct tx_ring_info *rp = &np->tx_rings[i]; + struct tx_ring_info *rp = &tx_rings[i]; pkts += rp->tx_packets; bytes += rp->tx_bytes; errors += rp->tx_errors; } + +no_rings: np->dev->stats.tx_packets = pkts; np->dev->stats.tx_bytes = bytes; np->dev->stats.tx_errors = errors; @@ -6287,9 +6315,10 @@ static struct net_device_stats *niu_get_stats(struct net_device *dev) { struct niu *np = netdev_priv(dev); - niu_get_rx_stats(np); - niu_get_tx_stats(np); - + if (netif_running(dev)) { + niu_get_rx_stats(np); + niu_get_tx_stats(np); + } return &dev->stats; } -- cgit v1.2.3 From b5ba6d12bdac21bc0620a5089e0f24e362645efd Mon Sep 17 00:00:00 2001 From: Ivan Vecera Date: Thu, 27 Jan 2011 12:24:11 +0100 Subject: r8169: use RxFIFO overflow workaround for 8168c chipset. I found that one of the 8168c chipsets (concretely XID 1c4000c0) starts generating RxFIFO overflow errors. The result is an infinite loop in interrupt handler as the RxFIFOOver is handled only for ...MAC_VER_11. With the workaround everything goes fine. Signed-off-by: Ivan Vecera Acked-by: Francois Romieu Cc: Hayes --- drivers/net/r8169.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index bde7d61f1930..9ab3b43c7d04 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -3757,7 +3757,8 @@ static void rtl_hw_start_8168(struct net_device *dev) RTL_W16(IntrMitigate, 0x5151); /* Work around for RxFIFO overflow. */ - if (tp->mac_version == RTL_GIGA_MAC_VER_11) { + if (tp->mac_version == RTL_GIGA_MAC_VER_11 || + tp->mac_version == RTL_GIGA_MAC_VER_22) { tp->intr_event |= RxFIFOOver | PCSTimeout; tp->intr_event &= ~RxOverflow; } @@ -4641,7 +4642,8 @@ static irqreturn_t rtl8169_interrupt(int irq, void *dev_instance) /* Work around for rx fifo overflow */ if (unlikely(status & RxFIFOOver) && - (tp->mac_version == RTL_GIGA_MAC_VER_11)) { + (tp->mac_version == RTL_GIGA_MAC_VER_11 || + tp->mac_version == RTL_GIGA_MAC_VER_22)) { netif_stop_queue(dev); rtl8169_tx_timeout(dev); break; -- cgit v1.2.3 From 1519e57fe81c14bb8fa4855579f19264d1ef63b4 Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Thu, 3 Feb 2011 12:02:36 +0100 Subject: r8169: RxFIFO overflow oddities with 8168 chipsets. Some experiment-based action to prevent my 8168 chipsets locking-up hard in the irq handler under load (pktgen ~1Mpps). Apparently a reset is not always mandatory (is it at all ?). - RTL_GIGA_MAC_VER_12 - RTL_GIGA_MAC_VER_25 Missed ~55% packets. Note: - this is an old SiS 965L motherboard - the 8168 chipset emits (lots of) control frames towards the sender - RTL_GIGA_MAC_VER_26 The chipset does not go into a frenzy of mac control pause when it crashes yet but it can still be crashed. It needs more work. Signed-off-by: Francois Romieu Cc: Ivan Vecera Cc: Hayes --- drivers/net/r8169.c | 30 +++++++++++++++++++++--------- 1 file changed, 21 insertions(+), 9 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index 9ab3b43c7d04..40dabe2b3dae 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -973,7 +973,8 @@ static void __rtl8169_check_link_status(struct net_device *dev, if (pm) pm_request_resume(&tp->pci_dev->dev); netif_carrier_on(dev); - netif_info(tp, ifup, dev, "link up\n"); + if (net_ratelimit()) + netif_info(tp, ifup, dev, "link up\n"); } else { netif_carrier_off(dev); netif_info(tp, ifdown, dev, "link down\n"); @@ -4640,13 +4641,24 @@ static irqreturn_t rtl8169_interrupt(int irq, void *dev_instance) break; } - /* Work around for rx fifo overflow */ - if (unlikely(status & RxFIFOOver) && - (tp->mac_version == RTL_GIGA_MAC_VER_11 || - tp->mac_version == RTL_GIGA_MAC_VER_22)) { - netif_stop_queue(dev); - rtl8169_tx_timeout(dev); - break; + if (unlikely(status & RxFIFOOver)) { + switch (tp->mac_version) { + /* Work around for rx fifo overflow */ + case RTL_GIGA_MAC_VER_11: + case RTL_GIGA_MAC_VER_22: + case RTL_GIGA_MAC_VER_26: + netif_stop_queue(dev); + rtl8169_tx_timeout(dev); + goto done; + /* Experimental science. Pktgen proof. */ + case RTL_GIGA_MAC_VER_12: + case RTL_GIGA_MAC_VER_25: + if (status == RxFIFOOver) + goto done; + break; + default: + break; + } } if (unlikely(status & SYSErr)) { @@ -4682,7 +4694,7 @@ static irqreturn_t rtl8169_interrupt(int irq, void *dev_instance) (status & RxFIFOOver) ? (status | RxOverflow) : status); status = RTL_R16(IntrStatus); } - +done: return IRQ_RETVAL(handled); } -- cgit v1.2.3 From f60ac8e7ab7cbb413a0131d5665b053f9f386526 Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Thu, 3 Feb 2011 17:27:52 +0100 Subject: r8169: prevent RxFIFO induced loops in the irq handler. While the RxFIFO interruption is masked for most 8168, nothing prevents it to appear in the irq status word. This is no excuse to crash. Signed-off-by: Francois Romieu Cc: Ivan Vecera Cc: Hayes --- drivers/net/r8169.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index 40dabe2b3dae..59ccf0c5c610 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -4650,6 +4650,15 @@ static irqreturn_t rtl8169_interrupt(int irq, void *dev_instance) netif_stop_queue(dev); rtl8169_tx_timeout(dev); goto done; + /* Testers needed. */ + case RTL_GIGA_MAC_VER_17: + case RTL_GIGA_MAC_VER_19: + case RTL_GIGA_MAC_VER_20: + case RTL_GIGA_MAC_VER_21: + case RTL_GIGA_MAC_VER_23: + case RTL_GIGA_MAC_VER_24: + case RTL_GIGA_MAC_VER_27: + case RTL_GIGA_MAC_VER_28: /* Experimental science. Pktgen proof. */ case RTL_GIGA_MAC_VER_12: case RTL_GIGA_MAC_VER_25: -- cgit v1.2.3 From fef52b0171dfd7dd9b85c9cc201bd433b42a8ded Mon Sep 17 00:00:00 2001 From: Vasiliy Kulikov Date: Fri, 4 Feb 2011 02:23:50 +0000 Subject: net: can: at91_can: world-writable sysfs files Don't allow everybody to write to mb0_id file. Signed-off-by: Vasiliy Kulikov Acked-by: Kurt Van Dijck Signed-off-by: David S. Miller --- drivers/net/can/at91_can.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/can/at91_can.c b/drivers/net/can/at91_can.c index 2532b9631538..57d2ffbbb433 100644 --- a/drivers/net/can/at91_can.c +++ b/drivers/net/can/at91_can.c @@ -1109,7 +1109,7 @@ static ssize_t at91_sysfs_set_mb0_id(struct device *dev, return ret; } -static DEVICE_ATTR(mb0_id, S_IWUGO | S_IRUGO, +static DEVICE_ATTR(mb0_id, S_IWUSR | S_IRUGO, at91_sysfs_show_mb0_id, at91_sysfs_set_mb0_id); static struct attribute *at91_sysfs_attrs[] = { -- cgit v1.2.3 From 1e6d93e45b231b3ae87c01902ede2315aacfe976 Mon Sep 17 00:00:00 2001 From: Vasiliy Kulikov Date: Fri, 4 Feb 2011 02:23:53 +0000 Subject: net: can: janz-ican3: world-writable sysfs termination file Don't allow everybody to set terminator via sysfs. Signed-off-by: Vasiliy Kulikov Signed-off-by: David S. Miller --- drivers/net/can/janz-ican3.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/can/janz-ican3.c b/drivers/net/can/janz-ican3.c index b9a6d7a5a739..366f5cc050ae 100644 --- a/drivers/net/can/janz-ican3.c +++ b/drivers/net/can/janz-ican3.c @@ -1618,7 +1618,7 @@ static ssize_t ican3_sysfs_set_term(struct device *dev, return count; } -static DEVICE_ATTR(termination, S_IWUGO | S_IRUGO, ican3_sysfs_show_term, +static DEVICE_ATTR(termination, S_IWUSR | S_IRUGO, ican3_sysfs_show_term, ican3_sysfs_set_term); static struct attribute *ican3_sysfs_attrs[] = { -- cgit v1.2.3 From 5820de5303f73d48dcc3a053c875d1f0da7eef67 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Thu, 3 Feb 2011 22:22:55 +0100 Subject: carl9170: fix typo in PS code This patch fixes a off-by-one bug which bugged the driver's PS-POLL capability. Cc: Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/ath/carl9170/rx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/carl9170/rx.c b/drivers/net/wireless/ath/carl9170/rx.c index 939a0e96ed1f..84866a4b8350 100644 --- a/drivers/net/wireless/ath/carl9170/rx.c +++ b/drivers/net/wireless/ath/carl9170/rx.c @@ -564,7 +564,7 @@ static void carl9170_ps_beacon(struct ar9170 *ar, void *data, unsigned int len) cam = ieee80211_check_tim(tim_ie, tim_len, ar->common.curaid); /* 2. Maybe the AP wants to send multicast/broadcast data? */ - cam = !!(tim_ie->bitmap_ctrl & 0x01); + cam |= !!(tim_ie->bitmap_ctrl & 0x01); if (!cam) { /* back to low-power land. */ -- cgit v1.2.3 From 9cf04dcc9c5ef884e952b2f461f39f682ef5c051 Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Fri, 4 Feb 2011 18:38:23 +0530 Subject: ath9k: Fix possible double free of PAPRD skb's This patch reverts the following commit ath9k: remove bfs_paprd_timestamp from struct ath_buf_state Under high interference/noisy environment conditions where PAPRD frames fails heavily introduces a possibility of double freeing skb's and causes kernel panic after some time.This patch reverts back to the original approach of using paprd_timestamp before freeing the PAPRD frame skb's [ 194.193705] Pid: 0, comm: swapper Tainted: G D WC 2.6.35-22-generic #33-Ubuntu [ 194.193712] Call Trace: [ 194.193722] [] ? printk+0x2d/0x35 [ 194.193732] [] panic+0x5a/0xd2 [ 194.193741] [] oops_end+0xcd/0xd0 [ 194.193750] [] die+0x54/0x80 [ 194.193758] [] do_trap+0x96/0xc0 [ 194.193837] [] ? do_invalid_op+0x0/0xa0 [ 194.193846] [] do_invalid_op+0x8b/0xa0 [ 194.193856] [] ? kfree+0xec/0xf0 [ 194.193866] [] ? default_spin_lock_flags+0x8/0x10 [ 194.193877] [] ? free_one_page+0x12a/0x2d0 [ 194.193888] [] ? __free_pages+0x1c/0x40 [ 194.193897] [] error_code+0x73/0x78 [ 194.193906] [] ? kfree+0xec/0xf0 [ 194.193915] [] ? skb_release_data+0x70/0xa0 [ 194.193924] [] skb_release_data+0x70/0xa0 [ 194.193933] [] __kfree_skb+0x17/0x90 [ 194.193941] [] consume_skb+0x21/0x40 [ 194.193964] [] ieee80211_tx_status+0x760/0x860 [mac80211] [ 194.193979] [] ath_tx_complete_buf+0x1bf/0x2c0 [ath9k] [ 194.193988] [] ? _raw_spin_lock_irqsave+0x2f/0x50 [ 194.193997] [] ? skb_queue_tail+0x3e/0x50 [ 194.194010] [] ath_tx_complete_aggr+0x823/0x940 [ath9k] [ 194.194021] [] ? sched_clock+0x8/0x10 [ 194.194030] [] ? sched_clock_local+0xa4/0x180 [ 194.194040] [] ? enqueue_sleeper+0x1e7/0x2b0 [ 194.194051] [] ? enqueue_entity+0x174/0x200 [ 194.194064] [] ath_tx_edma_tasklet+0x2bd/0x3b0 [ath9k] [ 194.194074] [] ? _raw_spin_lock_irqsave+0x2f/0x50 [ 194.194088] [] ath9k_tasklet+0x9f/0x190 [ath9k] [ 194.194097] [] tasklet_action+0xa7/0xb0 [ 194.194107] [] __do_softirq+0x9c/0x1b0 [ 194.194117] [] ? irq_to_desc+0x14/0x20 [ 194.194126] [] ? ack_apic_level+0x64/0x1f0 [ 194.194136] [] do_softirq+0x45/0x50 [ 194.194145] [] irq_exit+0x65/0x70 [ 194.194153] [] do_IRQ+0x55/0xc0 [ 194.194162] [] ? hrtimer_start+0x27/0x30 [ 194.194171] [] common_interrupt+0x30/0x38 [ 194.194181] [] ? native_safe_halt+0xa/0x10 [ 194.194268] [] default_idle+0x49/0xb0 [ 194.194277] [] cpu_idle+0x8c/0xd0 [ 194.194286] [] rest_init+0x71/0x80 [ 194.194295] [] start_kernel+0x36e/0x374 [ 194.194305] [] ? pass_all_bootoptions+0x0/0xa [ 194.194314] [] i386_start_kernel+0xd7/0xdf [ 194.194364] panic occurred, switching back to text console Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ath9k.h | 2 +- drivers/net/wireless/ath/ath9k/main.c | 2 -- drivers/net/wireless/ath/ath9k/xmit.c | 7 ++++++- 3 files changed, 7 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 3681caf54282..23838e37d45f 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -218,6 +218,7 @@ struct ath_frame_info { struct ath_buf_state { u8 bf_type; u8 bfs_paprd; + unsigned long bfs_paprd_timestamp; enum ath9k_internal_frame_type bfs_ftype; }; @@ -593,7 +594,6 @@ struct ath_softc { struct work_struct paprd_work; struct work_struct hw_check_work; struct completion paprd_complete; - bool paprd_pending; u32 intrstatus; u32 sc_flags; /* SC_OP_* */ diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 9040c2ff1909..da5c64597c1f 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -342,7 +342,6 @@ static bool ath_paprd_send_frame(struct ath_softc *sc, struct sk_buff *skb, int tx_info->control.rates[1].idx = -1; init_completion(&sc->paprd_complete); - sc->paprd_pending = true; txctl.paprd = BIT(chain); if (ath_tx_start(hw, skb, &txctl) != 0) { @@ -353,7 +352,6 @@ static bool ath_paprd_send_frame(struct ath_softc *sc, struct sk_buff *skb, int time_left = wait_for_completion_timeout(&sc->paprd_complete, msecs_to_jiffies(ATH_PAPRD_TIMEOUT)); - sc->paprd_pending = false; if (!time_left) ath_dbg(ath9k_hw_common(sc->sc_ah), ATH_DBG_CALIBRATE, diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 33a37edbaf79..07b7804aec5b 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -1725,6 +1725,9 @@ static void ath_tx_start_dma(struct ath_softc *sc, struct ath_buf *bf, ar9003_hw_set_paprd_txdesc(sc->sc_ah, bf->bf_desc, bf->bf_state.bfs_paprd); + if (txctl->paprd) + bf->bf_state.bfs_paprd_timestamp = jiffies; + ath_tx_send_normal(sc, txctl->txq, tid, &bf_head); } @@ -1886,7 +1889,9 @@ static void ath_tx_complete_buf(struct ath_softc *sc, struct ath_buf *bf, bf->bf_buf_addr = 0; if (bf->bf_state.bfs_paprd) { - if (!sc->paprd_pending) + if (time_after(jiffies, + bf->bf_state.bfs_paprd_timestamp + + msecs_to_jiffies(ATH_PAPRD_TIMEOUT))) dev_kfree_skb_any(skb); else complete(&sc->paprd_complete); -- cgit v1.2.3 From e45ff01d3f79bc71e6f514302a776cc8815eaecc Mon Sep 17 00:00:00 2001 From: Ajit Khaparde Date: Fri, 4 Feb 2011 17:18:28 +0000 Subject: benet: Avoid potential null deref in be_cmd_get_seeprom_data() Found by: Jesper Juhl Signed-off-by: Ajit Khaparde Signed-off-by: David S. Miller --- drivers/net/benet/be_cmds.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/benet/be_cmds.c b/drivers/net/benet/be_cmds.c index 0c7811faf72c..a179cc6d79f2 100644 --- a/drivers/net/benet/be_cmds.c +++ b/drivers/net/benet/be_cmds.c @@ -1786,6 +1786,10 @@ int be_cmd_get_seeprom_data(struct be_adapter *adapter, spin_lock_bh(&adapter->mcc_lock); wrb = wrb_from_mccq(adapter); + if (!wrb) { + status = -EBUSY; + goto err; + } req = nonemb_cmd->va; sge = nonembedded_sgl(wrb); @@ -1801,6 +1805,7 @@ int be_cmd_get_seeprom_data(struct be_adapter *adapter, status = be_mcc_notify_wait(adapter); +err: spin_unlock_bh(&adapter->mcc_lock); return status; } -- cgit v1.2.3 From bf1f9ae05036e12035f8e9a48f3dcf4dd14fdada Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Sat, 5 Feb 2011 10:41:53 +0000 Subject: sis900: Fix mem leak in sis900_rx error path Fix memory leak in error path of sis900_rx(). If we don't do this we'll leak the skb we dev_alloc_skb()'ed just a few lines above when the variable goes out of scope. Signed-off-by: Jesper Juhl Signed-off-by: David S. Miller --- drivers/net/sis900.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c index 5976d1d51df1..640e368ebeee 100644 --- a/drivers/net/sis900.c +++ b/drivers/net/sis900.c @@ -1777,6 +1777,7 @@ static int sis900_rx(struct net_device *net_dev) "cur_rx:%4.4d, dirty_rx:%4.4d\n", net_dev->name, sis_priv->cur_rx, sis_priv->dirty_rx); + dev_kfree_skb(skb); break; } -- cgit v1.2.3 From 711c914688163dbe757c174788e20695088478e5 Mon Sep 17 00:00:00 2001 From: Vladislav Zolotarov Date: Sun, 6 Feb 2011 11:21:49 -0800 Subject: bnx2x: Duplication in promisc mode Prevent packets duplication for frames targeting FCoE L2 ring: packets were arriving to stack from both L2 RSS and from FCoE L2 in a promiscuous mode. Configure FCoE L2 ring to DROP_ALL rx mode, when interface is configured to PROMISC, and to accept only unicast frames, when interface is configured to ALL_MULTI. Signed-off-by: Vladislav Zolotarov Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x/bnx2x_main.c | 32 +++++++++++++++++++++++--------- 1 file changed, 23 insertions(+), 9 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/bnx2x/bnx2x_main.c b/drivers/net/bnx2x/bnx2x_main.c index f40740e68ea5..d584d32c747d 100644 --- a/drivers/net/bnx2x/bnx2x_main.c +++ b/drivers/net/bnx2x/bnx2x_main.c @@ -4276,9 +4276,12 @@ void bnx2x_set_storm_rx_mode(struct bnx2x *bp) def_q_filters |= BNX2X_ACCEPT_UNICAST | BNX2X_ACCEPT_BROADCAST | BNX2X_ACCEPT_MULTICAST; #ifdef BCM_CNIC - cl_id = bnx2x_fcoe(bp, cl_id); - bnx2x_rxq_set_mac_filters(bp, cl_id, BNX2X_ACCEPT_UNICAST | - BNX2X_ACCEPT_MULTICAST); + if (!NO_FCOE(bp)) { + cl_id = bnx2x_fcoe(bp, cl_id); + bnx2x_rxq_set_mac_filters(bp, cl_id, + BNX2X_ACCEPT_UNICAST | + BNX2X_ACCEPT_MULTICAST); + } #endif break; @@ -4286,18 +4289,29 @@ void bnx2x_set_storm_rx_mode(struct bnx2x *bp) def_q_filters |= BNX2X_ACCEPT_UNICAST | BNX2X_ACCEPT_BROADCAST | BNX2X_ACCEPT_ALL_MULTICAST; #ifdef BCM_CNIC - cl_id = bnx2x_fcoe(bp, cl_id); - bnx2x_rxq_set_mac_filters(bp, cl_id, BNX2X_ACCEPT_UNICAST | - BNX2X_ACCEPT_MULTICAST); + /* + * Prevent duplication of multicast packets by configuring FCoE + * L2 Client to receive only matched unicast frames. + */ + if (!NO_FCOE(bp)) { + cl_id = bnx2x_fcoe(bp, cl_id); + bnx2x_rxq_set_mac_filters(bp, cl_id, + BNX2X_ACCEPT_UNICAST); + } #endif break; case BNX2X_RX_MODE_PROMISC: def_q_filters |= BNX2X_PROMISCUOUS_MODE; #ifdef BCM_CNIC - cl_id = bnx2x_fcoe(bp, cl_id); - bnx2x_rxq_set_mac_filters(bp, cl_id, BNX2X_ACCEPT_UNICAST | - BNX2X_ACCEPT_MULTICAST); + /* + * Prevent packets duplication by configuring DROP_ALL for FCoE + * L2 Client. + */ + if (!NO_FCOE(bp)) { + cl_id = bnx2x_fcoe(bp, cl_id); + bnx2x_rxq_set_mac_filters(bp, cl_id, BNX2X_ACCEPT_NONE); + } #endif /* pass management unicast packets as well */ llh_mask |= NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_UNCST; -- cgit v1.2.3 From 3dd823e6b86407aed1a025041d8f1df77e43a9c8 Mon Sep 17 00:00:00 2001 From: Don Fry Date: Sun, 6 Feb 2011 09:29:45 -0800 Subject: iwlagn: Re-enable RF_KILL interrupt when down With commit 554d1d027b19265c4aa3f718b3126d2b86e09a08 only one RF_KILL interrupt will be seen by the driver when the interface is down. Re-enable the interrupt when it occurs to see all transitions. Signed-off-by: Don Fry Signed-off-by: Wey-Yi Guy Cc: stable@kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index f13a83a7e62b..a236b8b14da1 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -1157,6 +1157,9 @@ static void iwl_irq_tasklet_legacy(struct iwl_priv *priv) /* only Re-enable if diabled by irq */ if (test_bit(STATUS_INT_ENABLED, &priv->status)) iwl_enable_interrupts(priv); + /* Re-enable RF_KILL if it occurred */ + else if (handled & CSR_INT_BIT_RF_KILL) + iwl_enable_rfkill_int(priv); #ifdef CONFIG_IWLWIFI_DEBUG if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) { @@ -1371,6 +1374,9 @@ static void iwl_irq_tasklet(struct iwl_priv *priv) /* only Re-enable if diabled by irq */ if (test_bit(STATUS_INT_ENABLED, &priv->status)) iwl_enable_interrupts(priv); + /* Re-enable RF_KILL if it occurred */ + else if (handled & CSR_INT_BIT_RF_KILL) + iwl_enable_rfkill_int(priv); } /* the threshold ratio of actual_ack_cnt to expected_ack_cnt in percent */ -- cgit v1.2.3 From 73020415564a3fe4931f3f70f500a5db13eea946 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sat, 22 Jan 2011 22:35:38 +0100 Subject: m68knommu: Remove dependencies on nonexistent M68KNOMMU M68KNOMMU is set nowhere. Signed-off-by: Geert Uytterhoeven Signed-off-by: Greg Ungerer --- drivers/net/can/mscan/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/can/mscan/Kconfig b/drivers/net/can/mscan/Kconfig index 27d1d398e25e..d38706958af6 100644 --- a/drivers/net/can/mscan/Kconfig +++ b/drivers/net/can/mscan/Kconfig @@ -1,5 +1,5 @@ config CAN_MSCAN - depends on CAN_DEV && (PPC || M68K || M68KNOMMU) + depends on CAN_DEV && (PPC || M68K) tristate "Support for Freescale MSCAN based chips" ---help--- The Motorola Scalable Controller Area Network (MSCAN) definition -- cgit v1.2.3 From 463342741222c79469303cdab8ce99c8bc2d80e8 Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Wed, 2 Feb 2011 10:19:55 +0000 Subject: e1000e: tx_timeout should not increment for non-hang events Currently the driver increments the tx_timeout counter (an error counter) when simply resetting the part with outstanding transmit work pending. This is an unnecessary count of an error, when all we should be doing is just resetting the part and discarding the transmits. With this change the only increment of tx_timeout is when the stack calls the watchdog reset function due to a true Tx timeout. Signed-off-by: Jesse Brandeburg Reviewed-by: Bruce Allan Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher --- drivers/net/e1000e/netdev.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 1c18f26b0812..3065870cf2a7 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -4309,7 +4309,6 @@ link_up: * to get done, so reset controller to flush Tx. * (Do the reset outside of interrupt context). */ - adapter->tx_timeout_count++; schedule_work(&adapter->reset_task); /* return immediately since reset is imminent */ return; -- cgit v1.2.3 From cf8e09b06d7ac05de4b6a3f1ee563979e36a46ed Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 24 Jan 2011 14:48:03 +0000 Subject: e1000: add support for Marvell Alaska M88E1118R PHY This patch adds support for Marvell Alask M88E188R PHY chips. Support for other M88* PHYs is already there, so there is nothing more to add than its PHY id. CC: Dirk Brandewie Signed-off-by: Florian Fainelli Acked-by: Jesse Brandeburg Signed-off-by: Jeff Kirsher --- drivers/net/e1000/e1000_hw.c | 4 +++- drivers/net/e1000/e1000_hw.h | 1 + 2 files changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c index aed223b1b897..7501d977d992 100644 --- a/drivers/net/e1000/e1000_hw.c +++ b/drivers/net/e1000/e1000_hw.c @@ -124,6 +124,7 @@ static s32 e1000_set_phy_type(struct e1000_hw *hw) case M88E1000_I_PHY_ID: case M88E1011_I_PHY_ID: case M88E1111_I_PHY_ID: + case M88E1118_E_PHY_ID: hw->phy_type = e1000_phy_m88; break; case IGP01E1000_I_PHY_ID: @@ -3222,7 +3223,8 @@ static s32 e1000_detect_gig_phy(struct e1000_hw *hw) break; case e1000_ce4100: if ((hw->phy_id == RTL8211B_PHY_ID) || - (hw->phy_id == RTL8201N_PHY_ID)) + (hw->phy_id == RTL8201N_PHY_ID) || + (hw->phy_id == M88E1118_E_PHY_ID)) match = true; break; case e1000_82541: diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h index 196eeda2dd6c..c70b23d52284 100644 --- a/drivers/net/e1000/e1000_hw.h +++ b/drivers/net/e1000/e1000_hw.h @@ -2917,6 +2917,7 @@ struct e1000_host_command_info { #define M88E1000_14_PHY_ID M88E1000_E_PHY_ID #define M88E1011_I_REV_4 0x04 #define M88E1111_I_PHY_ID 0x01410CC0 +#define M88E1118_E_PHY_ID 0x01410E40 #define L1LXT971A_PHY_ID 0x001378E0 #define RTL8211B_PHY_ID 0x001CC910 -- cgit v1.2.3 From 2c4db944a29c624dd5e4b9c44fc6c9901831d2d5 Mon Sep 17 00:00:00 2001 From: Emil Tantilov Date: Wed, 5 Jan 2011 07:09:41 +0000 Subject: ixgbe: fix variable set but not used warnings by gcc 4.6 Caught with gcc 4.6 -Wunused-but-set-variable Remove unused napi_vectors variable. Fix the use of reset_bit in ixgbe_reset_hw_X540() Signed-off-by: Emil Tantilov Tested-by: Stephen Ko Signed-off-by: Jeff Kirsher --- drivers/net/ixgbe/ixgbe_main.c | 3 --- drivers/net/ixgbe/ixgbe_x540.c | 6 +++--- 2 files changed, 3 insertions(+), 6 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 602078b84892..44a1cf040c3e 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -4863,16 +4863,13 @@ static int ixgbe_alloc_q_vectors(struct ixgbe_adapter *adapter) { int q_idx, num_q_vectors; struct ixgbe_q_vector *q_vector; - int napi_vectors; int (*poll)(struct napi_struct *, int); if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) { num_q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS; - napi_vectors = adapter->num_rx_queues; poll = &ixgbe_clean_rxtx_many; } else { num_q_vectors = 1; - napi_vectors = 1; poll = &ixgbe_poll; } diff --git a/drivers/net/ixgbe/ixgbe_x540.c b/drivers/net/ixgbe/ixgbe_x540.c index 3a8923993ce3..f2518b01067d 100644 --- a/drivers/net/ixgbe/ixgbe_x540.c +++ b/drivers/net/ixgbe/ixgbe_x540.c @@ -133,17 +133,17 @@ static s32 ixgbe_reset_hw_X540(struct ixgbe_hw *hw) } ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL); - IXGBE_WRITE_REG(hw, IXGBE_CTRL, (ctrl | IXGBE_CTRL_RST)); + IXGBE_WRITE_REG(hw, IXGBE_CTRL, (ctrl | reset_bit)); IXGBE_WRITE_FLUSH(hw); /* Poll for reset bit to self-clear indicating reset is complete */ for (i = 0; i < 10; i++) { udelay(1); ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL); - if (!(ctrl & IXGBE_CTRL_RST)) + if (!(ctrl & reset_bit)) break; } - if (ctrl & IXGBE_CTRL_RST) { + if (ctrl & reset_bit) { status = IXGBE_ERR_RESET_FAILED; hw_dbg(hw, "Reset polling failed to complete.\n"); } -- cgit v1.2.3 From a124339ad28389093ed15eca990d39c51c5736cc Mon Sep 17 00:00:00 2001 From: Don Skidmore Date: Tue, 18 Jan 2011 22:53:47 +0000 Subject: ixgbe: fix for 82599 erratum on Header Splitting We have found a hardware erratum on 82599 hardware that can lead to unpredictable behavior when Header Splitting mode is enabled. So we are no longer enabling this feature on affected hardware. Please see the 82599 Specification Update for more information. CC: stable@kernel.org Signed-off-by: Don Skidmore Tested-by: Stephen Ko Signed-off-by: Jeff Kirsher --- drivers/net/ixgbe/ixgbe_main.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 44a1cf040c3e..d6c21a386791 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -3176,9 +3176,16 @@ static void ixgbe_set_rx_buffer_len(struct ixgbe_adapter *adapter) u32 mhadd, hlreg0; /* Decide whether to use packet split mode or not */ + /* On by default */ + adapter->flags |= IXGBE_FLAG_RX_PS_ENABLED; + /* Do not use packet split if we're in SR-IOV Mode */ - if (!adapter->num_vfs) - adapter->flags |= IXGBE_FLAG_RX_PS_ENABLED; + if (adapter->num_vfs) + adapter->flags &= ~IXGBE_FLAG_RX_PS_ENABLED; + + /* Disable packet split due to 82599 erratum #45 */ + if (hw->mac.type == ixgbe_mac_82599EB) + adapter->flags &= ~IXGBE_FLAG_RX_PS_ENABLED; /* Set the RX buffer length according to the mode */ if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) { -- cgit v1.2.3 From 96cc637235892a102fb829218adac048bd730ab7 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Wed, 19 Jan 2011 18:33:05 +0000 Subject: ixgbe: limit VF access to network traffic This change fixes VM pool allocation issues based on MAC address filtering, as well as limits the scope of VF access to promiscuous mode. Signed-off-by: Alexander Duyck Acked-by: Greg Rose Signed-off-by: Jeff Kirsher --- drivers/net/ixgbe/ixgbe_common.c | 3 +++ drivers/net/ixgbe/ixgbe_sriov.c | 2 -- 2 files changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c index d5ede2df3e42..ebbda7d15254 100644 --- a/drivers/net/ixgbe/ixgbe_common.c +++ b/drivers/net/ixgbe/ixgbe_common.c @@ -1370,6 +1370,9 @@ s32 ixgbe_init_rx_addrs_generic(struct ixgbe_hw *hw) hw_dbg(hw, " New MAC Addr =%pM\n", hw->mac.addr); hw->mac.ops.set_rar(hw, 0, hw->mac.addr, 0, IXGBE_RAH_AV); + + /* clear VMDq pool/queue selection for RAR 0 */ + hw->mac.ops.clear_vmdq(hw, 0, IXGBE_CLEAR_VMDQ_ALL); } hw->addr_ctrl.overflow_promisc = 0; diff --git a/drivers/net/ixgbe/ixgbe_sriov.c b/drivers/net/ixgbe/ixgbe_sriov.c index 47b15738b009..187b3a16ec1f 100644 --- a/drivers/net/ixgbe/ixgbe_sriov.c +++ b/drivers/net/ixgbe/ixgbe_sriov.c @@ -110,12 +110,10 @@ static int ixgbe_set_vf_vlan(struct ixgbe_adapter *adapter, int add, int vid, return adapter->hw.mac.ops.set_vfta(&adapter->hw, vid, vf, (bool)add); } - static void ixgbe_set_vmolr(struct ixgbe_hw *hw, u32 vf, bool aupe) { u32 vmolr = IXGBE_READ_REG(hw, IXGBE_VMOLR(vf)); vmolr |= (IXGBE_VMOLR_ROMPE | - IXGBE_VMOLR_ROPE | IXGBE_VMOLR_BAM); if (aupe) vmolr |= IXGBE_VMOLR_AUPE; -- cgit v1.2.3 From fbbea32b6ae2ecce4aa80207b5c1d29496c4778d Mon Sep 17 00:00:00 2001 From: Don Skidmore Date: Wed, 26 Jan 2011 06:04:17 +0000 Subject: ixgbe: cleanup variable initialization The ixgbe_fcoe_ddp_get function wasn't initializing one of its variables and this was producing compiler warnings. This patch cleans that up. Signed-off-by: Don Skidmore Tested-by: Stephen Ko Signed-off-by: Jeff Kirsher --- drivers/net/ixgbe/ixgbe_fcoe.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ixgbe/ixgbe_fcoe.c b/drivers/net/ixgbe/ixgbe_fcoe.c index 6342d4859790..8753980668c7 100644 --- a/drivers/net/ixgbe/ixgbe_fcoe.c +++ b/drivers/net/ixgbe/ixgbe_fcoe.c @@ -165,7 +165,7 @@ int ixgbe_fcoe_ddp_get(struct net_device *netdev, u16 xid, unsigned int thisoff = 0; unsigned int thislen = 0; u32 fcbuff, fcdmarw, fcfltrw; - dma_addr_t addr; + dma_addr_t addr = 0; if (!netdev || !sgl) return 0; -- cgit v1.2.3 From 310e5ca82a6f2e39b55eed1d9e3137c350f0b3b0 Mon Sep 17 00:00:00 2001 From: Don Skidmore Date: Wed, 26 Jan 2011 06:04:37 +0000 Subject: ixgbe: update version string This will synchronize the version string with that of the latest source forge driver which shares its functionality. Signed-off-by: Don Skidmore Signed-off-by: Jeff Kirsher --- drivers/net/ixgbe/ixgbe_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index d6c21a386791..fbae703b46d7 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -52,7 +52,7 @@ char ixgbe_driver_name[] = "ixgbe"; static const char ixgbe_driver_string[] = "Intel(R) 10 Gigabit PCI Express Network Driver"; -#define DRV_VERSION "3.0.12-k2" +#define DRV_VERSION "3.2.9-k2" const char ixgbe_driver_version[] = DRV_VERSION; static char ixgbe_copyright[] = "Copyright (c) 1999-2010 Intel Corporation."; -- cgit v1.2.3 From 84e77a8bc73cad2f910cc981f266904c66a17825 Mon Sep 17 00:00:00 2001 From: Alexey Orishko Date: Mon, 7 Feb 2011 09:45:10 +0000 Subject: USB CDC NCM errata updates for cdc_ncm host driver Specification links: - CDC NCM errata link: http://www.usb.org/developers/devclass_docs/NCM10_012011.zip - CDC and WMC errata link: http://www.usb.org/developers/devclass_docs/CDC1.2_WMC1.1_012011.zip Changes: - driver updated to match cdc.h header with errata changes - added support for USB_CDC_SET_NTB_INPUT_SIZE control request with 8 byte length - fixes to comply with specification: send only control requests supported by device, set number of datagrams for IN direction, connection speed structure update, etc. - packet loss fixed for tx direction; misleading flag renamed. - adjusted hard_mtu value. Signed-off-by: Alexey Orishko Signed-off-by: David S. Miller --- drivers/net/usb/cdc_ncm.c | 227 ++++++++++++++++++++++++++++++---------------- 1 file changed, 147 insertions(+), 80 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index 04e8ce14a1d0..7113168473cf 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -1,7 +1,7 @@ /* * cdc_ncm.c * - * Copyright (C) ST-Ericsson 2010 + * Copyright (C) ST-Ericsson 2010-2011 * Contact: Alexey Orishko * Original author: Hans Petter Selasky * @@ -54,7 +54,7 @@ #include #include -#define DRIVER_VERSION "17-Jan-2011" +#define DRIVER_VERSION "7-Feb-2011" /* CDC NCM subclass 3.2.1 */ #define USB_CDC_NCM_NDP16_LENGTH_MIN 0x10 @@ -77,6 +77,9 @@ */ #define CDC_NCM_DPT_DATAGRAMS_MAX 32 +/* Maximum amount of IN datagrams in NTB */ +#define CDC_NCM_DPT_DATAGRAMS_IN_MAX 0 /* unlimited */ + /* Restart the timer, if amount of datagrams is less than given value */ #define CDC_NCM_RESTART_TIMER_DATAGRAM_CNT 3 @@ -85,11 +88,6 @@ (sizeof(struct usb_cdc_ncm_nth16) + sizeof(struct usb_cdc_ncm_ndp16) + \ (CDC_NCM_DPT_DATAGRAMS_MAX + 1) * sizeof(struct usb_cdc_ncm_dpe16)) -struct connection_speed_change { - __le32 USBitRate; /* holds 3GPP downlink value, bits per second */ - __le32 DSBitRate; /* holds 3GPP uplink value, bits per second */ -} __attribute__ ((packed)); - struct cdc_ncm_data { struct usb_cdc_ncm_nth16 nth16; struct usb_cdc_ncm_ndp16 ndp16; @@ -198,10 +196,10 @@ static u8 cdc_ncm_setup(struct cdc_ncm_ctx *ctx) { struct usb_cdc_notification req; u32 val; - __le16 max_datagram_size; u8 flags; u8 iface_no; int err; + u16 ntb_fmt_supported; iface_no = ctx->control->cur_altsetting->desc.bInterfaceNumber; @@ -223,6 +221,9 @@ static u8 cdc_ncm_setup(struct cdc_ncm_ctx *ctx) ctx->tx_remainder = le16_to_cpu(ctx->ncm_parm.wNdpOutPayloadRemainder); ctx->tx_modulus = le16_to_cpu(ctx->ncm_parm.wNdpOutDivisor); ctx->tx_ndp_modulus = le16_to_cpu(ctx->ncm_parm.wNdpOutAlignment); + /* devices prior to NCM Errata shall set this field to zero */ + ctx->tx_max_datagrams = le16_to_cpu(ctx->ncm_parm.wNtbOutMaxDatagrams); + ntb_fmt_supported = le16_to_cpu(ctx->ncm_parm.bmNtbFormatsSupported); if (ctx->func_desc != NULL) flags = ctx->func_desc->bmNetworkCapabilities; @@ -231,22 +232,58 @@ static u8 cdc_ncm_setup(struct cdc_ncm_ctx *ctx) pr_debug("dwNtbInMaxSize=%u dwNtbOutMaxSize=%u " "wNdpOutPayloadRemainder=%u wNdpOutDivisor=%u " - "wNdpOutAlignment=%u flags=0x%x\n", + "wNdpOutAlignment=%u wNtbOutMaxDatagrams=%u flags=0x%x\n", ctx->rx_max, ctx->tx_max, ctx->tx_remainder, ctx->tx_modulus, - ctx->tx_ndp_modulus, flags); + ctx->tx_ndp_modulus, ctx->tx_max_datagrams, flags); - /* max count of tx datagrams without terminating NULL entry */ - ctx->tx_max_datagrams = CDC_NCM_DPT_DATAGRAMS_MAX; + /* max count of tx datagrams */ + if ((ctx->tx_max_datagrams == 0) || + (ctx->tx_max_datagrams > CDC_NCM_DPT_DATAGRAMS_MAX)) + ctx->tx_max_datagrams = CDC_NCM_DPT_DATAGRAMS_MAX; /* verify maximum size of received NTB in bytes */ - if ((ctx->rx_max < - (CDC_NCM_MIN_HDR_SIZE + CDC_NCM_MIN_DATAGRAM_SIZE)) || - (ctx->rx_max > CDC_NCM_NTB_MAX_SIZE_RX)) { + if (ctx->rx_max < USB_CDC_NCM_NTB_MIN_IN_SIZE) { + pr_debug("Using min receive length=%d\n", + USB_CDC_NCM_NTB_MIN_IN_SIZE); + ctx->rx_max = USB_CDC_NCM_NTB_MIN_IN_SIZE; + } + + if (ctx->rx_max > CDC_NCM_NTB_MAX_SIZE_RX) { pr_debug("Using default maximum receive length=%d\n", CDC_NCM_NTB_MAX_SIZE_RX); ctx->rx_max = CDC_NCM_NTB_MAX_SIZE_RX; } + /* inform device about NTB input size changes */ + if (ctx->rx_max != le32_to_cpu(ctx->ncm_parm.dwNtbInMaxSize)) { + req.bmRequestType = USB_TYPE_CLASS | USB_DIR_OUT | + USB_RECIP_INTERFACE; + req.bNotificationType = USB_CDC_SET_NTB_INPUT_SIZE; + req.wValue = 0; + req.wIndex = cpu_to_le16(iface_no); + + if (flags & USB_CDC_NCM_NCAP_NTB_INPUT_SIZE) { + struct usb_cdc_ncm_ndp_input_size ndp_in_sz; + + req.wLength = 8; + ndp_in_sz.dwNtbInMaxSize = cpu_to_le32(ctx->rx_max); + ndp_in_sz.wNtbInMaxDatagrams = + cpu_to_le16(CDC_NCM_DPT_DATAGRAMS_MAX); + ndp_in_sz.wReserved = 0; + err = cdc_ncm_do_request(ctx, &req, &ndp_in_sz, 0, NULL, + 1000); + } else { + __le32 dwNtbInMaxSize = cpu_to_le32(ctx->rx_max); + + req.wLength = 4; + err = cdc_ncm_do_request(ctx, &req, &dwNtbInMaxSize, 0, + NULL, 1000); + } + + if (err) + pr_debug("Setting NTB Input Size failed\n"); + } + /* verify maximum size of transmitted NTB in bytes */ if ((ctx->tx_max < (CDC_NCM_MIN_HDR_SIZE + CDC_NCM_MIN_DATAGRAM_SIZE)) || @@ -297,47 +334,84 @@ static u8 cdc_ncm_setup(struct cdc_ncm_ctx *ctx) /* additional configuration */ /* set CRC Mode */ - req.bmRequestType = USB_TYPE_CLASS | USB_DIR_OUT | USB_RECIP_INTERFACE; - req.bNotificationType = USB_CDC_SET_CRC_MODE; - req.wValue = cpu_to_le16(USB_CDC_NCM_CRC_NOT_APPENDED); - req.wIndex = cpu_to_le16(iface_no); - req.wLength = 0; - - err = cdc_ncm_do_request(ctx, &req, NULL, 0, NULL, 1000); - if (err) - pr_debug("Setting CRC mode off failed\n"); + if (flags & USB_CDC_NCM_NCAP_CRC_MODE) { + req.bmRequestType = USB_TYPE_CLASS | USB_DIR_OUT | + USB_RECIP_INTERFACE; + req.bNotificationType = USB_CDC_SET_CRC_MODE; + req.wValue = cpu_to_le16(USB_CDC_NCM_CRC_NOT_APPENDED); + req.wIndex = cpu_to_le16(iface_no); + req.wLength = 0; + + err = cdc_ncm_do_request(ctx, &req, NULL, 0, NULL, 1000); + if (err) + pr_debug("Setting CRC mode off failed\n"); + } - /* set NTB format */ - req.bmRequestType = USB_TYPE_CLASS | USB_DIR_OUT | USB_RECIP_INTERFACE; - req.bNotificationType = USB_CDC_SET_NTB_FORMAT; - req.wValue = cpu_to_le16(USB_CDC_NCM_NTB16_FORMAT); - req.wIndex = cpu_to_le16(iface_no); - req.wLength = 0; + /* set NTB format, if both formats are supported */ + if (ntb_fmt_supported & USB_CDC_NCM_NTH32_SIGN) { + req.bmRequestType = USB_TYPE_CLASS | USB_DIR_OUT | + USB_RECIP_INTERFACE; + req.bNotificationType = USB_CDC_SET_NTB_FORMAT; + req.wValue = cpu_to_le16(USB_CDC_NCM_NTB16_FORMAT); + req.wIndex = cpu_to_le16(iface_no); + req.wLength = 0; + + err = cdc_ncm_do_request(ctx, &req, NULL, 0, NULL, 1000); + if (err) + pr_debug("Setting NTB format to 16-bit failed\n"); + } - err = cdc_ncm_do_request(ctx, &req, NULL, 0, NULL, 1000); - if (err) - pr_debug("Setting NTB format to 16-bit failed\n"); + ctx->max_datagram_size = CDC_NCM_MIN_DATAGRAM_SIZE; /* set Max Datagram Size (MTU) */ - req.bmRequestType = USB_TYPE_CLASS | USB_DIR_IN | USB_RECIP_INTERFACE; - req.bNotificationType = USB_CDC_GET_MAX_DATAGRAM_SIZE; - req.wValue = 0; - req.wIndex = cpu_to_le16(iface_no); - req.wLength = cpu_to_le16(2); + if (flags & USB_CDC_NCM_NCAP_MAX_DATAGRAM_SIZE) { + __le16 max_datagram_size; + u16 eth_max_sz = le16_to_cpu(ctx->ether_desc->wMaxSegmentSize); + + req.bmRequestType = USB_TYPE_CLASS | USB_DIR_IN | + USB_RECIP_INTERFACE; + req.bNotificationType = USB_CDC_GET_MAX_DATAGRAM_SIZE; + req.wValue = 0; + req.wIndex = cpu_to_le16(iface_no); + req.wLength = cpu_to_le16(2); + + err = cdc_ncm_do_request(ctx, &req, &max_datagram_size, 0, NULL, + 1000); + if (err) { + pr_debug("GET_MAX_DATAGRAM_SIZE failed, use size=%u\n", + CDC_NCM_MIN_DATAGRAM_SIZE); + } else { + ctx->max_datagram_size = le16_to_cpu(max_datagram_size); + /* Check Eth descriptor value */ + if (eth_max_sz < CDC_NCM_MAX_DATAGRAM_SIZE) { + if (ctx->max_datagram_size > eth_max_sz) + ctx->max_datagram_size = eth_max_sz; + } else { + if (ctx->max_datagram_size > + CDC_NCM_MAX_DATAGRAM_SIZE) + ctx->max_datagram_size = + CDC_NCM_MAX_DATAGRAM_SIZE; + } - err = cdc_ncm_do_request(ctx, &req, &max_datagram_size, 0, NULL, 1000); - if (err) { - pr_debug(" GET_MAX_DATAGRAM_SIZE failed, using size=%u\n", - CDC_NCM_MIN_DATAGRAM_SIZE); - /* use default */ - ctx->max_datagram_size = CDC_NCM_MIN_DATAGRAM_SIZE; - } else { - ctx->max_datagram_size = le16_to_cpu(max_datagram_size); + if (ctx->max_datagram_size < CDC_NCM_MIN_DATAGRAM_SIZE) + ctx->max_datagram_size = + CDC_NCM_MIN_DATAGRAM_SIZE; + + /* if value changed, update device */ + req.bmRequestType = USB_TYPE_CLASS | USB_DIR_OUT | + USB_RECIP_INTERFACE; + req.bNotificationType = USB_CDC_SET_MAX_DATAGRAM_SIZE; + req.wValue = 0; + req.wIndex = cpu_to_le16(iface_no); + req.wLength = 2; + max_datagram_size = cpu_to_le16(ctx->max_datagram_size); + + err = cdc_ncm_do_request(ctx, &req, &max_datagram_size, + 0, NULL, 1000); + if (err) + pr_debug("SET_MAX_DATAGRAM_SIZE failed\n"); + } - if (ctx->max_datagram_size < CDC_NCM_MIN_DATAGRAM_SIZE) - ctx->max_datagram_size = CDC_NCM_MIN_DATAGRAM_SIZE; - else if (ctx->max_datagram_size > CDC_NCM_MAX_DATAGRAM_SIZE) - ctx->max_datagram_size = CDC_NCM_MAX_DATAGRAM_SIZE; } if (ctx->netdev->mtu != (ctx->max_datagram_size - ETH_HLEN)) @@ -466,19 +540,13 @@ static int cdc_ncm_bind(struct usbnet *dev, struct usb_interface *intf) ctx->ether_desc = (const struct usb_cdc_ether_desc *)buf; - dev->hard_mtu = le16_to_cpu(ctx->ether_desc->wMaxSegmentSize); - if (dev->hard_mtu < - (CDC_NCM_MIN_DATAGRAM_SIZE - ETH_HLEN)) - dev->hard_mtu = - CDC_NCM_MIN_DATAGRAM_SIZE - ETH_HLEN; - - else if (dev->hard_mtu > - (CDC_NCM_MAX_DATAGRAM_SIZE - ETH_HLEN)) - dev->hard_mtu = - CDC_NCM_MAX_DATAGRAM_SIZE - ETH_HLEN; + if (dev->hard_mtu < CDC_NCM_MIN_DATAGRAM_SIZE) + dev->hard_mtu = CDC_NCM_MIN_DATAGRAM_SIZE; + else if (dev->hard_mtu > CDC_NCM_MAX_DATAGRAM_SIZE) + dev->hard_mtu = CDC_NCM_MAX_DATAGRAM_SIZE; break; case USB_CDC_NCM_TYPE: @@ -628,13 +696,13 @@ cdc_ncm_fill_tx_frame(struct cdc_ncm_ctx *ctx, struct sk_buff *skb) u32 offset; u32 last_offset; u16 n = 0; - u8 timeout = 0; + u8 ready2send = 0; /* if there is a remaining skb, it gets priority */ if (skb != NULL) swap(skb, ctx->tx_rem_skb); else - timeout = 1; + ready2send = 1; /* * +----------------+ @@ -682,9 +750,10 @@ cdc_ncm_fill_tx_frame(struct cdc_ncm_ctx *ctx, struct sk_buff *skb) for (; n < ctx->tx_max_datagrams; n++) { /* check if end of transmit buffer is reached */ - if (offset >= ctx->tx_max) + if (offset >= ctx->tx_max) { + ready2send = 1; break; - + } /* compute maximum buffer size */ rem = ctx->tx_max - offset; @@ -711,9 +780,7 @@ cdc_ncm_fill_tx_frame(struct cdc_ncm_ctx *ctx, struct sk_buff *skb) } ctx->tx_rem_skb = skb; skb = NULL; - - /* loop one more time */ - timeout = 1; + ready2send = 1; } break; } @@ -756,7 +823,7 @@ cdc_ncm_fill_tx_frame(struct cdc_ncm_ctx *ctx, struct sk_buff *skb) ctx->tx_curr_last_offset = last_offset; goto exit_no_skb; - } else if ((n < ctx->tx_max_datagrams) && (timeout == 0)) { + } else if ((n < ctx->tx_max_datagrams) && (ready2send == 0)) { /* wait for more frames */ /* push variables */ ctx->tx_curr_skb = skb_out; @@ -813,7 +880,7 @@ cdc_ncm_fill_tx_frame(struct cdc_ncm_ctx *ctx, struct sk_buff *skb) cpu_to_le16(sizeof(ctx->tx_ncm.nth16)); ctx->tx_ncm.nth16.wSequence = cpu_to_le16(ctx->tx_seq); ctx->tx_ncm.nth16.wBlockLength = cpu_to_le16(last_offset); - ctx->tx_ncm.nth16.wFpIndex = ALIGN(sizeof(struct usb_cdc_ncm_nth16), + ctx->tx_ncm.nth16.wNdpIndex = ALIGN(sizeof(struct usb_cdc_ncm_nth16), ctx->tx_ndp_modulus); memcpy(skb_out->data, &(ctx->tx_ncm.nth16), sizeof(ctx->tx_ncm.nth16)); @@ -825,13 +892,13 @@ cdc_ncm_fill_tx_frame(struct cdc_ncm_ctx *ctx, struct sk_buff *skb) rem = sizeof(ctx->tx_ncm.ndp16) + ((ctx->tx_curr_frame_num + 1) * sizeof(struct usb_cdc_ncm_dpe16)); ctx->tx_ncm.ndp16.wLength = cpu_to_le16(rem); - ctx->tx_ncm.ndp16.wNextFpIndex = 0; /* reserved */ + ctx->tx_ncm.ndp16.wNextNdpIndex = 0; /* reserved */ - memcpy(((u8 *)skb_out->data) + ctx->tx_ncm.nth16.wFpIndex, + memcpy(((u8 *)skb_out->data) + ctx->tx_ncm.nth16.wNdpIndex, &(ctx->tx_ncm.ndp16), sizeof(ctx->tx_ncm.ndp16)); - memcpy(((u8 *)skb_out->data) + ctx->tx_ncm.nth16.wFpIndex + + memcpy(((u8 *)skb_out->data) + ctx->tx_ncm.nth16.wNdpIndex + sizeof(ctx->tx_ncm.ndp16), &(ctx->tx_ncm.dpe16), (ctx->tx_curr_frame_num + 1) * @@ -961,7 +1028,7 @@ static int cdc_ncm_rx_fixup(struct usbnet *dev, struct sk_buff *skb_in) goto error; } - temp = le16_to_cpu(ctx->rx_ncm.nth16.wFpIndex); + temp = le16_to_cpu(ctx->rx_ncm.nth16.wNdpIndex); if ((temp + sizeof(ctx->rx_ncm.ndp16)) > actlen) { pr_debug("invalid DPT16 index\n"); goto error; @@ -1048,10 +1115,10 @@ error: static void cdc_ncm_speed_change(struct cdc_ncm_ctx *ctx, - struct connection_speed_change *data) + struct usb_cdc_speed_change *data) { - uint32_t rx_speed = le32_to_cpu(data->USBitRate); - uint32_t tx_speed = le32_to_cpu(data->DSBitRate); + uint32_t rx_speed = le32_to_cpu(data->DLBitRRate); + uint32_t tx_speed = le32_to_cpu(data->ULBitRate); /* * Currently the USB-NET API does not support reporting the actual @@ -1092,7 +1159,7 @@ static void cdc_ncm_status(struct usbnet *dev, struct urb *urb) /* test for split data in 8-byte chunks */ if (test_and_clear_bit(EVENT_STS_SPLIT, &dev->flags)) { cdc_ncm_speed_change(ctx, - (struct connection_speed_change *)urb->transfer_buffer); + (struct usb_cdc_speed_change *)urb->transfer_buffer); return; } @@ -1120,12 +1187,12 @@ static void cdc_ncm_status(struct usbnet *dev, struct urb *urb) break; case USB_CDC_NOTIFY_SPEED_CHANGE: - if (urb->actual_length < - (sizeof(*event) + sizeof(struct connection_speed_change))) + if (urb->actual_length < (sizeof(*event) + + sizeof(struct usb_cdc_speed_change))) set_bit(EVENT_STS_SPLIT, &dev->flags); else cdc_ncm_speed_change(ctx, - (struct connection_speed_change *) &event[1]); + (struct usb_cdc_speed_change *) &event[1]); break; default: -- cgit v1.2.3 From eab743ede8c4a5e88533d022e9c5374ed08df4cb Mon Sep 17 00:00:00 2001 From: Tomoya Date: Mon, 7 Feb 2011 23:29:01 +0000 Subject: pch_can: fix 800k comms issue Currently, 800k comms fails since prop_seg set zero. (EG20T PCH CAN register of prop_seg must be set more than 1) To prevent prop_seg set to zero, change tseg2_min 1 to 2. Signed-off-by: Tomoya MORINAGA Signed-off-by: David S. Miller --- drivers/net/can/pch_can.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/can/pch_can.c b/drivers/net/can/pch_can.c index c42e97268248..9b171d12f793 100644 --- a/drivers/net/can/pch_can.c +++ b/drivers/net/can/pch_can.c @@ -187,7 +187,7 @@ static struct can_bittiming_const pch_can_bittiming_const = { .name = KBUILD_MODNAME, .tseg1_min = 1, .tseg1_max = 16, - .tseg2_min = 1, + .tseg2_min = 2, .tseg2_max = 8, .sjw_max = 4, .brp_min = 1, -- cgit v1.2.3 From ce9736d4fb48beed370e22ac156779746dda7b92 Mon Sep 17 00:00:00 2001 From: Tomoya Date: Mon, 7 Feb 2011 23:29:02 +0000 Subject: pch_can: fix rmmod issue Currently, when rmmod pch_can, kernel failure occurs. The cause is pci_iounmap executed before pch_can_reset. Thus pci_iounmap moves after pch_can_reset. Signed-off-by: Tomoya MORINAGA Signed-off-by: David S. Miller --- drivers/net/can/pch_can.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/can/pch_can.c b/drivers/net/can/pch_can.c index 9b171d12f793..342d514c5e84 100644 --- a/drivers/net/can/pch_can.c +++ b/drivers/net/can/pch_can.c @@ -959,13 +959,13 @@ static void __devexit pch_can_remove(struct pci_dev *pdev) struct pch_can_priv *priv = netdev_priv(ndev); unregister_candev(priv->ndev); - pci_iounmap(pdev, priv->regs); if (priv->use_msi) pci_disable_msi(priv->dev); pci_release_regions(pdev); pci_disable_device(pdev); pci_set_drvdata(pdev, NULL); pch_can_reset(priv); + pci_iounmap(pdev, priv->regs); free_candev(priv->ndev); } -- cgit v1.2.3 From c69b90920a36b88ab0d649963d81355d865eeb05 Mon Sep 17 00:00:00 2001 From: Tomoya Date: Mon, 7 Feb 2011 23:29:03 +0000 Subject: pch_can: fix module reload issue with MSI Currently, in case reload pch_can, pch_can not to be able to catch interrupt. The cause is bus-master is not set in pch_can. Thus, add enabling bus-master processing. Signed-off-by: Tomoya MORINAGA Signed-off-by: David S. Miller --- drivers/net/can/pch_can.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/can/pch_can.c b/drivers/net/can/pch_can.c index 342d514c5e84..7d8bc128044c 100644 --- a/drivers/net/can/pch_can.c +++ b/drivers/net/can/pch_can.c @@ -1238,6 +1238,7 @@ static int __devinit pch_can_probe(struct pci_dev *pdev, priv->use_msi = 0; } else { netdev_err(ndev, "PCH CAN opened with MSI\n"); + pci_set_master(pdev); priv->use_msi = 1; } -- cgit v1.2.3 From 75d1a7522f8b3f4de3eea040fdcdb640deeda64d Mon Sep 17 00:00:00 2001 From: Toshiharu Okada Date: Wed, 9 Feb 2011 12:28:06 -0800 Subject: pch_gbe: Fix the issue which a driver locks when rx offload is set by ethtool This driver will be in a deadlock, When the rx offload is set by ethtool. The pch_gbe_reinit_locked function was modified. Signed-off-by: Toshiharu Okada Signed-off-by: David S. Miller --- drivers/net/pch_gbe/pch_gbe_main.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/pch_gbe/pch_gbe_main.c b/drivers/net/pch_gbe/pch_gbe_main.c index 1bf12339441b..4c9a7d4f3fca 100644 --- a/drivers/net/pch_gbe/pch_gbe_main.c +++ b/drivers/net/pch_gbe/pch_gbe_main.c @@ -519,7 +519,9 @@ static void pch_gbe_reset_task(struct work_struct *work) struct pch_gbe_adapter *adapter; adapter = container_of(work, struct pch_gbe_adapter, reset_task); + rtnl_lock(); pch_gbe_reinit_locked(adapter); + rtnl_unlock(); } /** @@ -528,14 +530,8 @@ static void pch_gbe_reset_task(struct work_struct *work) */ void pch_gbe_reinit_locked(struct pch_gbe_adapter *adapter) { - struct net_device *netdev = adapter->netdev; - - rtnl_lock(); - if (netif_running(netdev)) { - pch_gbe_down(adapter); - pch_gbe_up(adapter); - } - rtnl_unlock(); + pch_gbe_down(adapter); + pch_gbe_up(adapter); } /** -- cgit v1.2.3 From c91d01556f52255a31575be0cb1981c92a2a5028 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Wed, 9 Feb 2011 08:46:06 +0100 Subject: iwl3945: remove plcp check Patch fixes: https://bugzilla.redhat.com/show_bug.cgi?id=654599 Many users report very low speed problem on 3945 devices, this patch fixes problem, but only for some of them. For unknown reason, sometimes after hw scanning, device is not able to receive frames at high rate. Since plcp health check may request hw scan to "reset radio", performance problem start to be observable after update kernel to .35, where plcp check was introduced. Bug reporter confirmed that removing plcp check fixed problem for him. Reported-and-tested-by: SilvioTO Cc: stable@kernel.org # 2.6.35+ Signed-off-by: Stanislaw Gruszka Acked-by: Wey-Yi Guy Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-3945.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c index a9b852be4509..3eb14fd2204b 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945.c @@ -2734,7 +2734,6 @@ static struct iwl_lib_ops iwl3945_lib = { .isr_ops = { .isr = iwl_isr_legacy, }, - .check_plcp_health = iwl3945_good_plcp_health, .debugfs_ops = { .rx_stats_read = iwl3945_ucode_rx_stats_read, -- cgit v1.2.3 From 69e6ed186009ce86cbf5da95f45227064134d694 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 9 Feb 2011 12:43:38 -0800 Subject: can: softing_cs needs slab.h From: Randy Dunlap softing_cs.c uses kzalloc & kfree, so it needs to include linux/slab.h. drivers/net/can/softing/softing_cs.c:234: error: implicit declaration of function 'kfree' drivers/net/can/softing/softing_cs.c:271: error: implicit declaration of function 'kzalloc' Signed-off-by: Randy Dunlap Signed-off-by: David S. Miller --- drivers/net/can/softing/softing_cs.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/can/softing/softing_cs.c b/drivers/net/can/softing/softing_cs.c index 300fe75dd1a7..c11bb4de8630 100644 --- a/drivers/net/can/softing/softing_cs.c +++ b/drivers/net/can/softing/softing_cs.c @@ -19,6 +19,7 @@ #include #include +#include #include #include -- cgit v1.2.3 From ebc02e9c524e9ff377dd8a3820522d381adf19c8 Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Wed, 9 Feb 2011 16:46:21 -0800 Subject: pch_can: fix tseg1/tseg2 setting issue Previous patch "[PATCH 1/3] pch_can: fix 800k comms issue" is wrong. I should have modified tseg1_min not tseg2_min. This patch reverts tseg2_min to 1 and set tseg1_min to 2. Signed-off-by: Tomoya MORINAGA Signed-off-by: David S. Miller --- drivers/net/can/pch_can.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/can/pch_can.c b/drivers/net/can/pch_can.c index 7d8bc128044c..e54712b22c27 100644 --- a/drivers/net/can/pch_can.c +++ b/drivers/net/can/pch_can.c @@ -185,9 +185,9 @@ struct pch_can_priv { static struct can_bittiming_const pch_can_bittiming_const = { .name = KBUILD_MODNAME, - .tseg1_min = 1, + .tseg1_min = 2, .tseg1_max = 16, - .tseg2_min = 2, + .tseg2_min = 1, .tseg2_max = 8, .sjw_max = 4, .brp_min = 1, -- cgit v1.2.3 From 3e9d08ec0a68f6faf718d5a7e050fe5ca0ba004f Mon Sep 17 00:00:00 2001 From: Bruce Rogers Date: Thu, 10 Feb 2011 11:03:31 -0800 Subject: virtio_net: Add schedule check to napi_enable call Under harsh testing conditions, including low memory, the guest would stop receiving packets. With this patch applied we no longer see any problems in the driver while performing these tests for extended periods of time. Make sure napi is scheduled subsequent to each napi_enable. Signed-off-by: Bruce Rogers Signed-off-by: Olaf Kirch Cc: stable@kernel.org Signed-off-by: Rusty Russell Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 27 ++++++++++++++++----------- 1 file changed, 16 insertions(+), 11 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 90a23e410d1b..82dba5aaf423 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -446,6 +446,20 @@ static void skb_recv_done(struct virtqueue *rvq) } } +static void virtnet_napi_enable(struct virtnet_info *vi) +{ + napi_enable(&vi->napi); + + /* If all buffers were filled by other side before we napi_enabled, we + * won't get another interrupt, so process any outstanding packets + * now. virtnet_poll wants re-enable the queue, so we disable here. + * We synchronize against interrupts via NAPI_STATE_SCHED */ + if (napi_schedule_prep(&vi->napi)) { + virtqueue_disable_cb(vi->rvq); + __napi_schedule(&vi->napi); + } +} + static void refill_work(struct work_struct *work) { struct virtnet_info *vi; @@ -454,7 +468,7 @@ static void refill_work(struct work_struct *work) vi = container_of(work, struct virtnet_info, refill.work); napi_disable(&vi->napi); still_empty = !try_fill_recv(vi, GFP_KERNEL); - napi_enable(&vi->napi); + virtnet_napi_enable(vi); /* In theory, this can happen: if we don't get any buffers in * we will *never* try to fill again. */ @@ -638,16 +652,7 @@ static int virtnet_open(struct net_device *dev) { struct virtnet_info *vi = netdev_priv(dev); - napi_enable(&vi->napi); - - /* If all buffers were filled by other side before we napi_enabled, we - * won't get another interrupt, so process any outstanding packets - * now. virtnet_poll wants re-enable the queue, so we disable here. - * We synchronize against interrupts via NAPI_STATE_SCHED */ - if (napi_schedule_prep(&vi->napi)) { - virtqueue_disable_cb(vi->rvq); - __napi_schedule(&vi->napi); - } + virtnet_napi_enable(vi); return 0; } -- cgit v1.2.3 From ab60707ffe9920b66b4fff5181b44b14cd091472 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Thu, 10 Feb 2011 10:58:45 +0000 Subject: USB Network driver infrastructure: Fix leak when usb_autopm_get_interface() returns less than zero in kevent(). We'll leak the memory allocated to 'urb' in drivers/net/usb/usbnet.c:kevent() when we 'goto fail_lowmem' and the 'urb' variable goes out of scope while still completely unused. Signed-off-by: Jesper Juhl Signed-off-by: David S. Miller --- drivers/net/usb/usbnet.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index ed9a41643ff4..95c41d56631c 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -931,8 +931,10 @@ fail_halt: if (urb != NULL) { clear_bit (EVENT_RX_MEMORY, &dev->flags); status = usb_autopm_get_interface(dev->intf); - if (status < 0) + if (status < 0) { + usb_free_urb(urb); goto fail_lowmem; + } if (rx_submit (dev, urb, GFP_KERNEL) == -ENOLINK) resched = 0; usb_autopm_put_interface(dev->intf); -- cgit v1.2.3 From 5b89db0e84bef81f6aa324f8f22a9258ff873de3 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Sun, 13 Feb 2011 11:15:35 +0000 Subject: Net, USB, Option, hso: Do not dereference NULL pointer In drivers/net/usb/hso.c::hso_create_bulk_serial_device() we have this code: ... serial = kzalloc(sizeof(*serial), GFP_KERNEL); if (!serial) goto exit; ... exit: hso_free_tiomget(serial); ... hso_free_tiomget() directly dereferences its argument, which in the example above is a NULL pointer, ouch. I could just add a 'if (serial)' test at the 'exit' label, but since most freeing functions in the kernel accept NULL pointers (and it seems like this was also assumed here) I opted to instead change 'hso_free_tiomget()' so that it is safe to call it with a NULL argument. I also modified the function to get rid of a pointles conditional before the call to 'usb_free_urb()' since that function already tests for NULL itself - besides fixing the NULL deref this change also buys us a few bytes in size. Before: $ size drivers/net/usb/hso.o text data bss dec hex filename 32200 592 9960 42752 a700 drivers/net/usb/hso.o After: $ size drivers/net/usb/hso.o text data bss dec hex filename 32196 592 9960 42748 a6fc drivers/net/usb/hso.o Signed-off-by: Jesper Juhl Signed-off-by: David S. Miller --- drivers/net/usb/hso.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index bed8fcedff49..6d83812603b6 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -2628,15 +2628,15 @@ exit: static void hso_free_tiomget(struct hso_serial *serial) { - struct hso_tiocmget *tiocmget = serial->tiocmget; + struct hso_tiocmget *tiocmget; + if (!serial) + return; + tiocmget = serial->tiocmget; if (tiocmget) { - if (tiocmget->urb) { - usb_free_urb(tiocmget->urb); - tiocmget->urb = NULL; - } + usb_free_urb(tiocmget->urb); + tiocmget->urb = NULL; serial->tiocmget = NULL; kfree(tiocmget); - } } -- cgit v1.2.3 From 539c9aa5ba7c5f71794ef0948c6dd29552f033e4 Mon Sep 17 00:00:00 2001 From: Giuseppe Cavallaro Date: Sun, 13 Feb 2011 17:00:05 -0800 Subject: stmmac: enable wol via magic frame by default. This patch enables it by default when the driver starts. This has been required by many people and seems to actually be useful on STB. At any rate, the WoL modes can be selected and turned-on/off by using the ethtool at run-time by users. Signed-off-by: Giuseppe Cavallaro Signed-off-by: David S. Miller --- drivers/net/stmmac/stmmac_main.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/stmmac/stmmac_main.c b/drivers/net/stmmac/stmmac_main.c index 34a0af3837f9..0e5f03135b50 100644 --- a/drivers/net/stmmac/stmmac_main.c +++ b/drivers/net/stmmac/stmmac_main.c @@ -1560,8 +1560,10 @@ static int stmmac_mac_device_setup(struct net_device *dev) priv->hw = device; - if (device_can_wakeup(priv->device)) + if (device_can_wakeup(priv->device)) { priv->wolopts = WAKE_MAGIC; /* Magic Frame as default */ + enable_irq_wake(dev->irq); + } return 0; } -- cgit v1.2.3 From ac09664248e300342e92b937c9894a8149ddf189 Mon Sep 17 00:00:00 2001 From: Toshiharu Okada Date: Tue, 8 Feb 2011 22:15:59 +0000 Subject: pch_gbe: Fix the issue that the receiving data is not normal. This PCH_GBE driver had an issue that the receiving data is not normal. This driver had not removed correctly the padding data which the DMA include in receiving data. This patch fixed this issue. Signed-off-by: Toshiharu Okada Signed-off-by: David S. Miller --- drivers/net/pch_gbe/pch_gbe_main.c | 97 +++++++++++++++++++++----------------- 1 file changed, 55 insertions(+), 42 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/pch_gbe/pch_gbe_main.c b/drivers/net/pch_gbe/pch_gbe_main.c index 4c9a7d4f3fca..f52d852569fb 100644 --- a/drivers/net/pch_gbe/pch_gbe_main.c +++ b/drivers/net/pch_gbe/pch_gbe_main.c @@ -29,6 +29,7 @@ const char pch_driver_version[] = DRV_VERSION; #define PCH_GBE_SHORT_PKT 64 #define DSC_INIT16 0xC000 #define PCH_GBE_DMA_ALIGN 0 +#define PCH_GBE_DMA_PADDING 2 #define PCH_GBE_WATCHDOG_PERIOD (1 * HZ) /* watchdog time */ #define PCH_GBE_COPYBREAK_DEFAULT 256 #define PCH_GBE_PCI_BAR 1 @@ -1365,16 +1366,13 @@ pch_gbe_clean_rx(struct pch_gbe_adapter *adapter, struct pch_gbe_buffer *buffer_info; struct pch_gbe_rx_desc *rx_desc; u32 length; - unsigned char tmp_packet[ETH_HLEN]; unsigned int i; unsigned int cleaned_count = 0; bool cleaned = false; - struct sk_buff *skb; + struct sk_buff *skb, *new_skb; u8 dma_status; u16 gbec_status; u32 tcp_ip_status; - u8 skb_copy_flag = 0; - u8 skb_padding_flag = 0; i = rx_ring->next_to_clean; @@ -1418,55 +1416,70 @@ pch_gbe_clean_rx(struct pch_gbe_adapter *adapter, pr_err("Receive CRC Error\n"); } else { /* get receive length */ - /* length convert[-3], padding[-2] */ - length = (rx_desc->rx_words_eob) - 3 - 2; + /* length convert[-3] */ + length = (rx_desc->rx_words_eob) - 3; /* Decide the data conversion method */ if (!adapter->rx_csum) { /* [Header:14][payload] */ - skb_padding_flag = 0; - skb_copy_flag = 1; + if (NET_IP_ALIGN) { + /* Because alignment differs, + * the new_skb is newly allocated, + * and data is copied to new_skb.*/ + new_skb = netdev_alloc_skb(netdev, + length + NET_IP_ALIGN); + if (!new_skb) { + /* dorrop error */ + pr_err("New skb allocation " + "Error\n"); + goto dorrop; + } + skb_reserve(new_skb, NET_IP_ALIGN); + memcpy(new_skb->data, skb->data, + length); + skb = new_skb; + } else { + /* DMA buffer is used as SKB as it is.*/ + buffer_info->skb = NULL; + } } else { /* [Header:14][padding:2][payload] */ - skb_padding_flag = 1; - if (length < copybreak) - skb_copy_flag = 1; - else - skb_copy_flag = 0; - } - - /* Data conversion */ - if (skb_copy_flag) { /* recycle skb */ - struct sk_buff *new_skb; - new_skb = - netdev_alloc_skb(netdev, - length + NET_IP_ALIGN); - if (new_skb) { - if (!skb_padding_flag) { - skb_reserve(new_skb, - NET_IP_ALIGN); + /* The length includes padding length */ + length = length - PCH_GBE_DMA_PADDING; + if ((length < copybreak) || + (NET_IP_ALIGN != PCH_GBE_DMA_PADDING)) { + /* Because alignment differs, + * the new_skb is newly allocated, + * and data is copied to new_skb. + * Padding data is deleted + * at the time of a copy.*/ + new_skb = netdev_alloc_skb(netdev, + length + NET_IP_ALIGN); + if (!new_skb) { + /* dorrop error */ + pr_err("New skb allocation " + "Error\n"); + goto dorrop; } + skb_reserve(new_skb, NET_IP_ALIGN); memcpy(new_skb->data, skb->data, - length); - /* save the skb - * in buffer_info as good */ + ETH_HLEN); + memcpy(&new_skb->data[ETH_HLEN], + &skb->data[ETH_HLEN + + PCH_GBE_DMA_PADDING], + length - ETH_HLEN); skb = new_skb; - } else if (!skb_padding_flag) { - /* dorrop error */ - pr_err("New skb allocation Error\n"); - goto dorrop; + } else { + /* Padding data is deleted + * by moving header data.*/ + memmove(&skb->data[PCH_GBE_DMA_PADDING], + &skb->data[0], ETH_HLEN); + skb_reserve(skb, NET_IP_ALIGN); + buffer_info->skb = NULL; } - } else { - buffer_info->skb = NULL; } - if (skb_padding_flag) { - memcpy(&tmp_packet[0], &skb->data[0], ETH_HLEN); - memcpy(&skb->data[NET_IP_ALIGN], &tmp_packet[0], - ETH_HLEN); - skb_reserve(skb, NET_IP_ALIGN); - - } - + /* The length includes FCS length */ + length = length - ETH_FCS_LEN; /* update status of driver */ adapter->stats.rx_bytes += length; adapter->stats.rx_packets++; -- cgit v1.2.3 From ddfdb508866b3c07b295f6c85c271981d88afe4c Mon Sep 17 00:00:00 2001 From: Kurt Van Dijck Date: Mon, 14 Feb 2011 11:44:01 -0800 Subject: net/can/softing: make CAN_SOFTING_CS depend on CAN_SOFTING The statement 'select CAN_SOFTING' may ignore the dependancies for CAN_SOFTING while selecting CAN_SOFTING_CS, as is therefore a bad choice. Signed-off-by: Kurt Van Dijck Acked-by: Randy Dunlap Signed-off-by: David S. Miller --- drivers/net/can/softing/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/can/softing/Kconfig b/drivers/net/can/softing/Kconfig index 8ba81b3ddd90..5de46a9a77bb 100644 --- a/drivers/net/can/softing/Kconfig +++ b/drivers/net/can/softing/Kconfig @@ -18,7 +18,7 @@ config CAN_SOFTING config CAN_SOFTING_CS tristate "Softing Gmbh CAN pcmcia cards" depends on PCMCIA - select CAN_SOFTING + depends on CAN_SOFTING ---help--- Support for PCMCIA cards from Softing Gmbh & some cards from Vector Gmbh. -- cgit v1.2.3 From 5d17920bd4df6802fb48ccf8283721657c5a8257 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 14 Feb 2011 13:28:00 -0800 Subject: iwlwifi: Delete iwl3945_good_plcp_health. Fixes this build warning: drivers/net/wireless/iwlwifi/iwl-3945.c:411:13: warning: 'iwl3945_good_plcp_health' defined but not used As per Johannes Berg. Signed-off-by: David S. Miller --- drivers/net/wireless/iwlwifi/iwl-3945.c | 66 --------------------------------- 1 file changed, 66 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c index 3eb14fd2204b..39b6f16c87fa 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945.c @@ -402,72 +402,6 @@ static void iwl3945_accumulative_statistics(struct iwl_priv *priv, } #endif -/** - * iwl3945_good_plcp_health - checks for plcp error. - * - * When the plcp error is exceeding the thresholds, reset the radio - * to improve the throughput. - */ -static bool iwl3945_good_plcp_health(struct iwl_priv *priv, - struct iwl_rx_packet *pkt) -{ - bool rc = true; - struct iwl3945_notif_statistics current_stat; - int combined_plcp_delta; - unsigned int plcp_msec; - unsigned long plcp_received_jiffies; - - if (priv->cfg->base_params->plcp_delta_threshold == - IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE) { - IWL_DEBUG_RADIO(priv, "plcp_err check disabled\n"); - return rc; - } - memcpy(¤t_stat, pkt->u.raw, sizeof(struct - iwl3945_notif_statistics)); - /* - * check for plcp_err and trigger radio reset if it exceeds - * the plcp error threshold plcp_delta. - */ - plcp_received_jiffies = jiffies; - plcp_msec = jiffies_to_msecs((long) plcp_received_jiffies - - (long) priv->plcp_jiffies); - priv->plcp_jiffies = plcp_received_jiffies; - /* - * check to make sure plcp_msec is not 0 to prevent division - * by zero. - */ - if (plcp_msec) { - combined_plcp_delta = - (le32_to_cpu(current_stat.rx.ofdm.plcp_err) - - le32_to_cpu(priv->_3945.statistics.rx.ofdm.plcp_err)); - - if ((combined_plcp_delta > 0) && - ((combined_plcp_delta * 100) / plcp_msec) > - priv->cfg->base_params->plcp_delta_threshold) { - /* - * if plcp_err exceed the threshold, the following - * data is printed in csv format: - * Text: plcp_err exceeded %d, - * Received ofdm.plcp_err, - * Current ofdm.plcp_err, - * combined_plcp_delta, - * plcp_msec - */ - IWL_DEBUG_RADIO(priv, "plcp_err exceeded %u, " - "%u, %d, %u mSecs\n", - priv->cfg->base_params->plcp_delta_threshold, - le32_to_cpu(current_stat.rx.ofdm.plcp_err), - combined_plcp_delta, plcp_msec); - /* - * Reset the RF radio due to the high plcp - * error rate - */ - rc = false; - } - } - return rc; -} - void iwl3945_hw_rx_statistics(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb) { -- cgit v1.2.3 From 98200ec28a66c8db5839ac26e9a895984206b50f Mon Sep 17 00:00:00 2001 From: Toshiharu Okada Date: Sun, 13 Feb 2011 22:51:54 +0000 Subject: pch_gbe: Fix the MAC Address load issue. With the specification of hardware, the processing at the time of driver starting was modified. This device write automatically the MAC address read from serial ROM into a MAC Adress1A/1B register at the time of power on reset. However, when stable clock is not supplied, the writing of MAC Adress1A/1B register may not be completed. In this case, it is necessary to load MAC address to MAC Address1A/1B register by the MAC Address1 load register. This patch always does the above processing, in order not to be dependent on system environment. Signed-off-by: Toshiharu Okada Signed-off-by: David S. Miller --- drivers/net/pch_gbe/pch_gbe.h | 2 +- drivers/net/pch_gbe/pch_gbe_main.c | 7 +++++++ 2 files changed, 8 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/pch_gbe/pch_gbe.h b/drivers/net/pch_gbe/pch_gbe.h index a0c26a99520f..e1e33c80fb25 100644 --- a/drivers/net/pch_gbe/pch_gbe.h +++ b/drivers/net/pch_gbe/pch_gbe.h @@ -73,7 +73,7 @@ struct pch_gbe_regs { struct pch_gbe_regs_mac_adr mac_adr[16]; u32 ADDR_MASK; u32 MIIM; - u32 reserve2; + u32 MAC_ADDR_LOAD; u32 RGMII_ST; u32 RGMII_CTRL; u32 reserve3[3]; diff --git a/drivers/net/pch_gbe/pch_gbe_main.c b/drivers/net/pch_gbe/pch_gbe_main.c index f52d852569fb..b99e90aca37d 100644 --- a/drivers/net/pch_gbe/pch_gbe_main.c +++ b/drivers/net/pch_gbe/pch_gbe_main.c @@ -89,6 +89,12 @@ static unsigned int copybreak __read_mostly = PCH_GBE_COPYBREAK_DEFAULT; static int pch_gbe_mdio_read(struct net_device *netdev, int addr, int reg); static void pch_gbe_mdio_write(struct net_device *netdev, int addr, int reg, int data); + +inline void pch_gbe_mac_load_mac_addr(struct pch_gbe_hw *hw) +{ + iowrite32(0x01, &hw->reg->MAC_ADDR_LOAD); +} + /** * pch_gbe_mac_read_mac_addr - Read MAC address * @hw: Pointer to the HW structure @@ -2331,6 +2337,7 @@ static int pch_gbe_probe(struct pci_dev *pdev, netdev->features = NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | NETIF_F_GRO; pch_gbe_set_ethtool_ops(netdev); + pch_gbe_mac_load_mac_addr(&adapter->hw); pch_gbe_mac_reset_hw(&adapter->hw); /* setup the private structure */ -- cgit v1.2.3 From bb14a1af86d01f66dc9620725ac00a240331afec Mon Sep 17 00:00:00 2001 From: Casey Leedom Date: Mon, 14 Feb 2011 12:56:22 +0000 Subject: cxgb4vf: Check driver parameters in the right place ... Check module parameter validity in the module initialization routine instead of the PCI Device Probe routine. Signed-off-by: Casey Leedom Signed-off-by: David S. Miller --- drivers/net/cxgb4vf/cxgb4vf_main.c | 23 +++++++++++------------ 1 file changed, 11 insertions(+), 12 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/cxgb4vf/cxgb4vf_main.c b/drivers/net/cxgb4vf/cxgb4vf_main.c index 56166ae2059f..072b64e49370 100644 --- a/drivers/net/cxgb4vf/cxgb4vf_main.c +++ b/drivers/net/cxgb4vf/cxgb4vf_main.c @@ -2488,17 +2488,6 @@ static int __devinit cxgb4vf_pci_probe(struct pci_dev *pdev, struct port_info *pi; struct net_device *netdev; - /* - * Vet our module parameters. - */ - if (msi != MSI_MSIX && msi != MSI_MSI) { - dev_err(&pdev->dev, "bad module parameter msi=%d; must be %d" - " (MSI-X or MSI) or %d (MSI)\n", msi, MSI_MSIX, - MSI_MSI); - err = -EINVAL; - goto err_out; - } - /* * Print our driver banner the first time we're called to initialize a * device. @@ -2802,7 +2791,6 @@ err_release_regions: err_disable_device: pci_disable_device(pdev); -err_out: return err; } @@ -2915,6 +2903,17 @@ static int __init cxgb4vf_module_init(void) { int ret; + /* + * Vet our module parameters. + */ + if (msi != MSI_MSIX && msi != MSI_MSI) { + printk(KERN_WARNING KBUILD_MODNAME + ": bad module parameter msi=%d; must be %d" + " (MSI-X or MSI) or %d (MSI)\n", + msi, MSI_MSIX, MSI_MSI); + return -EINVAL; + } + /* Debugfs support is optional, just warn if this fails */ cxgb4vf_debugfs_root = debugfs_create_dir(KBUILD_MODNAME, NULL); if (!cxgb4vf_debugfs_root) -- cgit v1.2.3 From 843635e0349be9e318be224d6241069a40e23320 Mon Sep 17 00:00:00 2001 From: Casey Leedom Date: Mon, 14 Feb 2011 12:56:23 +0000 Subject: cxgb4vf: Behave properly when CONFIG_DEBUG_FS isn't defined ... When CONFIG_DEBUG_FS we get "ERR_PTR()"s back from the debugfs routines instead of NULL. Use the right predicates to check for this. Signed-off-by: Casey Leedom Signed-off-by: David S. Miller --- drivers/net/cxgb4vf/cxgb4vf_main.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/cxgb4vf/cxgb4vf_main.c b/drivers/net/cxgb4vf/cxgb4vf_main.c index 072b64e49370..2be1088ff601 100644 --- a/drivers/net/cxgb4vf/cxgb4vf_main.c +++ b/drivers/net/cxgb4vf/cxgb4vf_main.c @@ -2040,7 +2040,7 @@ static int __devinit setup_debugfs(struct adapter *adapter) { int i; - BUG_ON(adapter->debugfs_root == NULL); + BUG_ON(IS_ERR_OR_NULL(adapter->debugfs_root)); /* * Debugfs support is best effort. @@ -2061,7 +2061,7 @@ static int __devinit setup_debugfs(struct adapter *adapter) */ static void cleanup_debugfs(struct adapter *adapter) { - BUG_ON(adapter->debugfs_root == NULL); + BUG_ON(IS_ERR_OR_NULL(adapter->debugfs_root)); /* * Unlike our sister routine cleanup_proc(), we don't need to remove @@ -2700,11 +2700,11 @@ static int __devinit cxgb4vf_pci_probe(struct pci_dev *pdev, /* * Set up our debugfs entries. */ - if (cxgb4vf_debugfs_root) { + if (!IS_ERR_OR_NULL(cxgb4vf_debugfs_root)) { adapter->debugfs_root = debugfs_create_dir(pci_name(pdev), cxgb4vf_debugfs_root); - if (adapter->debugfs_root == NULL) + if (IS_ERR_OR_NULL(adapter->debugfs_root)) dev_warn(&pdev->dev, "could not create debugfs" " directory"); else @@ -2759,7 +2759,7 @@ static int __devinit cxgb4vf_pci_probe(struct pci_dev *pdev, */ err_free_debugfs: - if (adapter->debugfs_root) { + if (!IS_ERR_OR_NULL(adapter->debugfs_root)) { cleanup_debugfs(adapter); debugfs_remove_recursive(adapter->debugfs_root); } @@ -2828,7 +2828,7 @@ static void __devexit cxgb4vf_pci_remove(struct pci_dev *pdev) /* * Tear down our debugfs entries. */ - if (adapter->debugfs_root) { + if (!IS_ERR_OR_NULL(adapter->debugfs_root)) { cleanup_debugfs(adapter); debugfs_remove_recursive(adapter->debugfs_root); } @@ -2916,12 +2916,12 @@ static int __init cxgb4vf_module_init(void) /* Debugfs support is optional, just warn if this fails */ cxgb4vf_debugfs_root = debugfs_create_dir(KBUILD_MODNAME, NULL); - if (!cxgb4vf_debugfs_root) + if (IS_ERR_OR_NULL(cxgb4vf_debugfs_root)) printk(KERN_WARNING KBUILD_MODNAME ": could not create" " debugfs entry, continuing\n"); ret = pci_register_driver(&cxgb4vf_driver); - if (ret < 0) + if (ret < 0 && !IS_ERR_OR_NULL(cxgb4vf_debugfs_root)) debugfs_remove(cxgb4vf_debugfs_root); return ret; } -- cgit v1.2.3 From 7e9c26295b2ae1be1285c7c9e593c19ce7ea7eba Mon Sep 17 00:00:00 2001 From: Casey Leedom Date: Mon, 14 Feb 2011 12:56:24 +0000 Subject: cxgb4vf: Quiesce Virtual Interfaces on shutdown ... When a Virtual Machine is rebooted, KVM currently fails to issue a Function Level Reset against any "Attached PCI Devices" (AKA "PCI Passthrough"). In addition to leaving the attached device in a random state in the next booted kernel (which sort of violates the entire idea of a reboot reseting hardware state), this leaves our peer thinking that the link is still up. (Note that a bug has been filed with the KVM folks, #25332, but there's been no response on that as of yet.) So, we add a "->shutdown()" method for the Virtual Function PCI Device to handle administrative shutdowns like a reboot. Signed-off-by: Casey Leedom Signed-off-by: David S. Miller --- drivers/net/cxgb4vf/cxgb4vf_main.c | 41 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 41 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/cxgb4vf/cxgb4vf_main.c b/drivers/net/cxgb4vf/cxgb4vf_main.c index 2be1088ff601..6aad64df4dcb 100644 --- a/drivers/net/cxgb4vf/cxgb4vf_main.c +++ b/drivers/net/cxgb4vf/cxgb4vf_main.c @@ -2861,6 +2861,46 @@ static void __devexit cxgb4vf_pci_remove(struct pci_dev *pdev) pci_release_regions(pdev); } +/* + * "Shutdown" quiesce the device, stopping Ingress Packet and Interrupt + * delivery. + */ +static void __devexit cxgb4vf_pci_shutdown(struct pci_dev *pdev) +{ + struct adapter *adapter; + int pidx; + + adapter = pci_get_drvdata(pdev); + if (!adapter) + return; + + /* + * Disable all Virtual Interfaces. This will shut down the + * delivery of all ingress packets into the chip for these + * Virtual Interfaces. + */ + for_each_port(adapter, pidx) { + struct net_device *netdev; + struct port_info *pi; + + if (!test_bit(pidx, &adapter->registered_device_map)) + continue; + + netdev = adapter->port[pidx]; + if (!netdev) + continue; + + pi = netdev_priv(netdev); + t4vf_enable_vi(adapter, pi->viid, false, false); + } + + /* + * Free up all Queues which will prevent further DMA and + * Interrupts allowing various internal pathways to drain. + */ + t4vf_free_sge_resources(adapter); +} + /* * PCI Device registration data structures. */ @@ -2894,6 +2934,7 @@ static struct pci_driver cxgb4vf_driver = { .id_table = cxgb4vf_pci_tbl, .probe = cxgb4vf_pci_probe, .remove = __devexit_p(cxgb4vf_pci_remove), + .shutdown = __devexit_p(cxgb4vf_pci_shutdown), }; /* -- cgit v1.2.3 From 0550769bb7f364fb9aeeb9412229fb7790ee79c4 Mon Sep 17 00:00:00 2001 From: Casey Leedom Date: Mon, 14 Feb 2011 12:56:25 +0000 Subject: cxgb4vf: Use defined Mailbox Timeout VF Driver should use mailbox command timeout specified in t4fw_interface.h rather than hard-coded value of 500ms. Signed-off-by: Casey Leedom Signed-off-by: David S. Miller --- drivers/net/cxgb4vf/t4vf_hw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/cxgb4vf/t4vf_hw.c b/drivers/net/cxgb4vf/t4vf_hw.c index 0f51c80475ce..192db226ec7f 100644 --- a/drivers/net/cxgb4vf/t4vf_hw.c +++ b/drivers/net/cxgb4vf/t4vf_hw.c @@ -171,7 +171,7 @@ int t4vf_wr_mbox_core(struct adapter *adapter, const void *cmd, int size, delay_idx = 0; ms = delay[0]; - for (i = 0; i < 500; i += ms) { + for (i = 0; i < FW_CMD_MAX_TIMEOUT; i += ms) { if (sleep_ok) { ms = delay[delay_idx]; if (delay_idx < ARRAY_SIZE(delay) - 1) -- cgit v1.2.3 From 58a69cb47ec6991bf006a3e5d202e8571b0327a4 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 16 Feb 2011 09:25:31 +0100 Subject: workqueue, freezer: unify spelling of 'freeze' + 'able' to 'freezable' There are two spellings in use for 'freeze' + 'able' - 'freezable' and 'freezeable'. The former is the more prominent one. The latter is mostly used by workqueue and in a few other odd places. Unify the spelling to 'freezable'. Signed-off-by: Tejun Heo Reported-by: Alan Stern Acked-by: "Rafael J. Wysocki" Acked-by: Greg Kroah-Hartman Acked-by: Dmitry Torokhov Cc: David Woodhouse Cc: Alex Dubov Cc: "David S. Miller" Cc: Steven Whitehouse --- drivers/net/can/mcp251x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/can/mcp251x.c b/drivers/net/can/mcp251x.c index 7ab534aee452..7513c4523ac4 100644 --- a/drivers/net/can/mcp251x.c +++ b/drivers/net/can/mcp251x.c @@ -940,7 +940,7 @@ static int mcp251x_open(struct net_device *net) goto open_unlock; } - priv->wq = create_freezeable_workqueue("mcp251x_wq"); + priv->wq = create_freezable_workqueue("mcp251x_wq"); INIT_WORK(&priv->tx_work, mcp251x_tx_work_handler); INIT_WORK(&priv->restart_work, mcp251x_restart_work_handler); -- cgit v1.2.3 From 615b32af9730def64330e4c0c95c973e90bd9c6d Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Wed, 2 Feb 2011 10:19:45 +0000 Subject: e1000e: check down flag in tasks This change is part of a fix to avoid any tasks running while the driver is exiting and deinitializing resources. Signed-off-by: Jesse Brandeburg Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher --- drivers/net/e1000e/netdev.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 3065870cf2a7..174633c93325 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -937,6 +937,9 @@ static void e1000_print_hw_hang(struct work_struct *work) u16 phy_status, phy_1000t_status, phy_ext_status; u16 pci_status; + if (test_bit(__E1000_DOWN, &adapter->state)) + return; + e1e_rphy(hw, PHY_STATUS, &phy_status); e1e_rphy(hw, PHY_1000T_STATUS, &phy_1000t_status); e1e_rphy(hw, PHY_EXT_STATUS, &phy_ext_status); @@ -1506,6 +1509,9 @@ static void e1000e_downshift_workaround(struct work_struct *work) struct e1000_adapter *adapter = container_of(work, struct e1000_adapter, downshift_task); + if (test_bit(__E1000_DOWN, &adapter->state)) + return; + e1000e_gig_downshift_workaround_ich8lan(&adapter->hw); } @@ -3765,6 +3771,10 @@ static void e1000e_update_phy_task(struct work_struct *work) { struct e1000_adapter *adapter = container_of(work, struct e1000_adapter, update_phy_task); + + if (test_bit(__E1000_DOWN, &adapter->state)) + return; + e1000_get_phy_info(&adapter->hw); } @@ -3775,6 +3785,10 @@ static void e1000e_update_phy_task(struct work_struct *work) static void e1000_update_phy_info(unsigned long data) { struct e1000_adapter *adapter = (struct e1000_adapter *) data; + + if (test_bit(__E1000_DOWN, &adapter->state)) + return; + schedule_work(&adapter->update_phy_task); } @@ -4149,6 +4163,9 @@ static void e1000_watchdog_task(struct work_struct *work) u32 link, tctl; int tx_pending = 0; + if (test_bit(__E1000_DOWN, &adapter->state)) + return; + link = e1000e_has_link(adapter); if ((netif_carrier_ok(netdev)) && link) { /* Cancel scheduled suspend requests. */ @@ -4887,6 +4904,10 @@ static void e1000_reset_task(struct work_struct *work) struct e1000_adapter *adapter; adapter = container_of(work, struct e1000_adapter, reset_task); + /* don't run the task if already down */ + if (test_bit(__E1000_DOWN, &adapter->state)) + return; + if (!((adapter->flags & FLAG_RX_NEEDS_RESTART) && (adapter->flags & FLAG_RX_RESTART_NOW))) { e1000e_dump(adapter); -- cgit v1.2.3 From 713b3c9e4c1a6da6b45da6474ed554ed0a48de69 Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Wed, 2 Feb 2011 10:19:50 +0000 Subject: e1000e: flush all writebacks before unload The driver was not flushing all writebacks before unloading, possibly causing memory to be written by the hardware after the driver had reinitialized the rings. This adds missing functionality to flush any pending writebacks and is called in all spots where descriptors should be completed before the driver begins processing. Signed-off-by: Jesse Brandeburg Reviewed-by: Bruce Allan Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher --- drivers/net/e1000e/netdev.c | 31 +++++++++++++++++++++---------- 1 file changed, 21 insertions(+), 10 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 174633c93325..3fa110ddb041 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -3344,6 +3344,21 @@ int e1000e_up(struct e1000_adapter *adapter) return 0; } +static void e1000e_flush_descriptors(struct e1000_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + + if (!(adapter->flags2 & FLAG2_DMA_BURST)) + return; + + /* flush pending descriptor writebacks to memory */ + ew32(TIDV, adapter->tx_int_delay | E1000_TIDV_FPD); + ew32(RDTR, adapter->rx_int_delay | E1000_RDTR_FPD); + + /* execute the writes immediately */ + e1e_flush(); +} + void e1000e_down(struct e1000_adapter *adapter) { struct net_device *netdev = adapter->netdev; @@ -3383,6 +3398,9 @@ void e1000e_down(struct e1000_adapter *adapter) if (!pci_channel_offline(adapter->pdev)) e1000e_reset(adapter); + + e1000e_flush_descriptors(adapter); + e1000_clean_tx_ring(adapter); e1000_clean_rx_ring(adapter); @@ -4354,19 +4372,12 @@ link_up: else ew32(ICS, E1000_ICS_RXDMT0); + /* flush pending descriptors to memory before detecting Tx hang */ + e1000e_flush_descriptors(adapter); + /* Force detection of hung controller every watchdog period */ adapter->detect_tx_hung = 1; - /* flush partial descriptors to memory before detecting Tx hang */ - if (adapter->flags2 & FLAG2_DMA_BURST) { - ew32(TIDV, adapter->tx_int_delay | E1000_TIDV_FPD); - ew32(RDTR, adapter->rx_int_delay | E1000_RDTR_FPD); - /* - * no need to flush the writes because the timeout code does - * an er32 first thing - */ - } - /* * With 82571 controllers, LAA may be overwritten due to controller * reset from the other port. Set the appropriate LAA in RAR[0] -- cgit v1.2.3 From 4c7e604babd15db9dca3b07de167a0f93fe23bf4 Mon Sep 17 00:00:00 2001 From: Andy Gospodarek Date: Thu, 17 Feb 2011 01:13:13 -0800 Subject: ixgbe: fix panic due to uninitialised pointer Systems containing an 82599EB and running a backported driver from upstream were panicing on boot. It turns out hw->mac.ops.setup_sfp is only set for 82599, so one should check to be sure that pointer is set before continuing in ixgbe_sfp_config_module_task. I verified by inspection that the upstream driver has the same issue and also added a check before the call in ixgbe_sfp_link_config. Signed-off-by: Andy Gospodarek Signed-off-by: Jeff Kirsher --- drivers/net/ixgbe/ixgbe_main.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index fbae703b46d7..30f9ccfb4f87 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -3728,7 +3728,8 @@ static void ixgbe_sfp_link_config(struct ixgbe_adapter *adapter) * We need to try and force an autonegotiation * session, then bring up link. */ - hw->mac.ops.setup_sfp(hw); + if (hw->mac.ops.setup_sfp) + hw->mac.ops.setup_sfp(hw); if (!(adapter->flags & IXGBE_FLAG_IN_SFP_LINK_TASK)) schedule_work(&adapter->multispeed_fiber_task); } else { @@ -5968,7 +5969,8 @@ static void ixgbe_sfp_config_module_task(struct work_struct *work) unregister_netdev(adapter->netdev); return; } - hw->mac.ops.setup_sfp(hw); + if (hw->mac.ops.setup_sfp) + hw->mac.ops.setup_sfp(hw); if (!(adapter->flags & IXGBE_FLAG_IN_SFP_LINK_TASK)) /* This will also work for DA Twinax connections */ -- cgit v1.2.3 From c600636bd560b04973174caa5e349a72bce51637 Mon Sep 17 00:00:00 2001 From: Amir Hanania Date: Tue, 15 Feb 2011 09:11:31 +0000 Subject: ixgbe: work around for DDP last buffer size A HW limitation was recently discovered where the last buffer in a DDP offload cannot be a full buffer size in length. Fix the issue with a work around by adding another buffer with size = 1. Signed-off-by: Amir Hanania Tested-by: Ross Brattain Signed-off-by: Jeff Kirsher --- drivers/net/ixgbe/ixgbe_fcoe.c | 51 +++++++++++++++++++++++++++++++++++++++++- drivers/net/ixgbe/ixgbe_fcoe.h | 2 ++ 2 files changed, 52 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ixgbe/ixgbe_fcoe.c b/drivers/net/ixgbe/ixgbe_fcoe.c index 8753980668c7..c54a88274d51 100644 --- a/drivers/net/ixgbe/ixgbe_fcoe.c +++ b/drivers/net/ixgbe/ixgbe_fcoe.c @@ -159,7 +159,7 @@ int ixgbe_fcoe_ddp_get(struct net_device *netdev, u16 xid, struct scatterlist *sg; unsigned int i, j, dmacount; unsigned int len; - static const unsigned int bufflen = 4096; + static const unsigned int bufflen = IXGBE_FCBUFF_MIN; unsigned int firstoff = 0; unsigned int lastsize; unsigned int thisoff = 0; @@ -254,6 +254,24 @@ int ixgbe_fcoe_ddp_get(struct net_device *netdev, u16 xid, /* only the last buffer may have non-full bufflen */ lastsize = thisoff + thislen; + /* + * lastsize can not be buffer len. + * If it is then adding another buffer with lastsize = 1. + */ + if (lastsize == bufflen) { + if (j >= IXGBE_BUFFCNT_MAX) { + e_err(drv, "xid=%x:%d,%d,%d:addr=%llx " + "not enough user buffers. We need an extra " + "buffer because lastsize is bufflen.\n", + xid, i, j, dmacount, (u64)addr); + goto out_noddp_free; + } + + ddp->udl[j] = (u64)(fcoe->extra_ddp_buffer_dma); + j++; + lastsize = 1; + } + fcbuff = (IXGBE_FCBUFF_4KB << IXGBE_FCBUFF_BUFFSIZE_SHIFT); fcbuff |= ((j & 0xff) << IXGBE_FCBUFF_BUFFCNT_SHIFT); fcbuff |= (firstoff << IXGBE_FCBUFF_OFFSET_SHIFT); @@ -532,6 +550,24 @@ void ixgbe_configure_fcoe(struct ixgbe_adapter *adapter) e_err(drv, "failed to allocated FCoE DDP pool\n"); spin_lock_init(&fcoe->lock); + + /* Extra buffer to be shared by all DDPs for HW work around */ + fcoe->extra_ddp_buffer = kmalloc(IXGBE_FCBUFF_MIN, GFP_ATOMIC); + if (fcoe->extra_ddp_buffer == NULL) { + e_err(drv, "failed to allocated extra DDP buffer\n"); + goto out_extra_ddp_buffer_alloc; + } + + fcoe->extra_ddp_buffer_dma = + dma_map_single(&adapter->pdev->dev, + fcoe->extra_ddp_buffer, + IXGBE_FCBUFF_MIN, + DMA_FROM_DEVICE); + if (dma_mapping_error(&adapter->pdev->dev, + fcoe->extra_ddp_buffer_dma)) { + e_err(drv, "failed to map extra DDP buffer\n"); + goto out_extra_ddp_buffer_dma; + } } /* Enable L2 eth type filter for FCoE */ @@ -581,6 +617,14 @@ void ixgbe_configure_fcoe(struct ixgbe_adapter *adapter) } } #endif + + return; + +out_extra_ddp_buffer_dma: + kfree(fcoe->extra_ddp_buffer); +out_extra_ddp_buffer_alloc: + pci_pool_destroy(fcoe->pool); + fcoe->pool = NULL; } /** @@ -600,6 +644,11 @@ void ixgbe_cleanup_fcoe(struct ixgbe_adapter *adapter) if (fcoe->pool) { for (i = 0; i < IXGBE_FCOE_DDP_MAX; i++) ixgbe_fcoe_ddp_put(adapter->netdev, i); + dma_unmap_single(&adapter->pdev->dev, + fcoe->extra_ddp_buffer_dma, + IXGBE_FCBUFF_MIN, + DMA_FROM_DEVICE); + kfree(fcoe->extra_ddp_buffer); pci_pool_destroy(fcoe->pool); fcoe->pool = NULL; } diff --git a/drivers/net/ixgbe/ixgbe_fcoe.h b/drivers/net/ixgbe/ixgbe_fcoe.h index 4bc2c551c8db..65cc8fb14fe7 100644 --- a/drivers/net/ixgbe/ixgbe_fcoe.h +++ b/drivers/net/ixgbe/ixgbe_fcoe.h @@ -70,6 +70,8 @@ struct ixgbe_fcoe { spinlock_t lock; struct pci_pool *pool; struct ixgbe_fcoe_ddp ddp[IXGBE_FCOE_DDP_MAX]; + unsigned char *extra_ddp_buffer; + dma_addr_t extra_ddp_buffer_dma; }; #endif /* _IXGBE_FCOE_H */ -- cgit v1.2.3 From 0d672e9f8ac320c6d1ea9103db6df7f99ea20361 Mon Sep 17 00:00:00 2001 From: Ivan Vecera Date: Tue, 15 Feb 2011 02:08:39 +0000 Subject: drivers/net: Call netif_carrier_off at the end of the probe Without calling of netif_carrier_off at the end of the probe the operstate is unknown when the device is initially opened. By default the carrier is on so when the device is opened and netif_carrier_on is called the link watch event is not fired and operstate remains zero (unknown). This patch fixes this behavior in forcedeth and r8169. Signed-off-by: Ivan Vecera Acked-by: Francois Romieu Signed-off-by: David S. Miller --- drivers/net/forcedeth.c | 2 ++ drivers/net/r8169.c | 2 ++ 2 files changed, 4 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index af09296ef0dd..9c0b1bac6af6 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -5645,6 +5645,8 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i goto out_error; } + netif_carrier_off(dev); + dev_info(&pci_dev->dev, "ifname %s, PHY OUI 0x%x @ %d, addr %pM\n", dev->name, np->phy_oui, np->phyaddr, dev->dev_addr); diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index 59ccf0c5c610..469ab0b7ce31 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -3190,6 +3190,8 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (pci_dev_run_wake(pdev)) pm_runtime_put_noidle(&pdev->dev); + netif_carrier_off(dev); + out: return rc; -- cgit v1.2.3 From ed199facd070f8e551dc16a2ae1baa01d8d28ed4 Mon Sep 17 00:00:00 2001 From: Matt Carlson Date: Tue, 15 Feb 2011 12:51:10 +0000 Subject: tg3: Restrict phy ioctl access If management firmware is present and the device is down, the firmware will assume control of the phy. If a phy access were allowed from the host, it will collide with firmware phy accesses, resulting in unpredictable behavior. This patch fixes the problem by disallowing phy accesses during the problematic condition. Signed-off-by: Matt Carlson Reviewed-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 93b32d366611..06c0e5033656 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -11158,7 +11158,9 @@ static int tg3_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) if (tp->phy_flags & TG3_PHYFLG_PHY_SERDES) break; /* We have no PHY */ - if (tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER) + if ((tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER) || + ((tp->tg3_flags & TG3_FLAG_ENABLE_ASF) && + !netif_running(dev))) return -EAGAIN; spin_lock_bh(&tp->lock); @@ -11174,7 +11176,9 @@ static int tg3_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) if (tp->phy_flags & TG3_PHYFLG_PHY_SERDES) break; /* We have no PHY */ - if (tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER) + if ((tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER) || + ((tp->tg3_flags & TG3_FLAG_ENABLE_ASF) && + !netif_running(dev))) return -EAGAIN; spin_lock_bh(&tp->lock); -- cgit v1.2.3