From ec5aecc0b227f5509d25853537f989ca303e2be1 Mon Sep 17 00:00:00 2001 From: Luca Coelho Date: Mon, 14 Jan 2019 13:00:23 +0200 Subject: iwlwifi: make IWLWIFI depend on CFG80211 Since IWLWIFI doesn't depend on MAC80211 anymore, it needs to depend on CFG80211, because it uses a few symbols from it. Add the dependency on CFG80211 accordingly. Additionally, make IWLWIFI_LEDS depend on IWLMVM or IWLDVM, since it doesn't need mac80211 but must be used for these. Fixes: aca432f06b8a ("iwlwifi: make MVM and DVM depend on MAC80211") Signed-off-by: Luca Coelho Signed-off-by: Kalle Valo --- drivers/net/wireless/intel/iwlwifi/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/intel/iwlwifi/Kconfig b/drivers/net/wireless/intel/iwlwifi/Kconfig index 491ca3c8b43c..83d5bceea08f 100644 --- a/drivers/net/wireless/intel/iwlwifi/Kconfig +++ b/drivers/net/wireless/intel/iwlwifi/Kconfig @@ -1,6 +1,6 @@ config IWLWIFI tristate "Intel Wireless WiFi Next Gen AGN - Wireless-N/Advanced-N/Ultimate-N (iwlwifi) " - depends on PCI && HAS_IOMEM + depends on PCI && HAS_IOMEM && CFG80211 select FW_LOADER ---help--- Select to build the driver supporting the: @@ -47,6 +47,7 @@ if IWLWIFI config IWLWIFI_LEDS bool depends on LEDS_CLASS=y || LEDS_CLASS=IWLWIFI + depends on IWLMVM || IWLDVM select LEDS_TRIGGERS select MAC80211_LEDS default y -- cgit v1.2.3 From 13e62626c578d9889ebbda7c521be5adff9bef8e Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Wed, 16 Jan 2019 12:37:23 +0100 Subject: wlcore: sdio: Fixup power on/off sequence During "wlan-up", we are programming the FW into the WiFi-chip. However, re-programming the FW doesn't work, unless a power cycle of the WiFi-chip is made in-between the programmings. To conform to this requirement and to fix the regression in a simple way, let's start by allowing that the SDIO card (WiFi-chip) may stay powered on (runtime resumed) when wl12xx_sdio_power_off() returns. The intent with the current code is to treat this scenario as an error, but unfortunate this doesn't work as expected, so let's fix this. The other part is to guarantee that a power cycle of the SDIO card has been completed when wl12xx_sdio_power_on() returns, as to allow the FW programming to succeed. However, relying solely on runtime PM to deal with this isn't sufficient. For example, userspace may prevent runtime suspend via sysfs for the device that represents the SDIO card, leading to that the mmc core also keeps it powered on. For this reason, let's instead do a brute force power cycle in wl12xx_sdio_power_on(). Fixes: 728a9dc61f13 ("wlcore: sdio: Fix flakey SDIO runtime PM handling") Signed-off-by: Ulf Hansson Tested-by: Tony Lindgren Tested-by: Anders Roxell Signed-off-by: Ulf Hansson Signed-off-by: Kalle Valo --- drivers/net/wireless/ti/wlcore/sdio.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ti/wlcore/sdio.c b/drivers/net/wireless/ti/wlcore/sdio.c index bd10165d7eec..4d4b07701149 100644 --- a/drivers/net/wireless/ti/wlcore/sdio.c +++ b/drivers/net/wireless/ti/wlcore/sdio.c @@ -164,6 +164,12 @@ static int wl12xx_sdio_power_on(struct wl12xx_sdio_glue *glue) } sdio_claim_host(func); + /* + * To guarantee that the SDIO card is power cycled, as required to make + * the FW programming to succeed, let's do a brute force HW reset. + */ + mmc_hw_reset(card->host); + sdio_enable_func(func); sdio_release_host(func); @@ -174,20 +180,13 @@ static int wl12xx_sdio_power_off(struct wl12xx_sdio_glue *glue) { struct sdio_func *func = dev_to_sdio_func(glue->dev); struct mmc_card *card = func->card; - int error; sdio_claim_host(func); sdio_disable_func(func); sdio_release_host(func); /* Let runtime PM know the card is powered off */ - error = pm_runtime_put(&card->dev); - if (error < 0 && error != -EBUSY) { - dev_err(&card->dev, "%s failed: %i\n", __func__, error); - - return error; - } - + pm_runtime_put(&card->dev); return 0; } -- cgit v1.2.3 From e15aa3b2b1388c399c1a2ce08550d2cc4f7e3e14 Mon Sep 17 00:00:00 2001 From: Mathias Thore Date: Mon, 28 Jan 2019 10:07:47 +0100 Subject: ucc_geth: Reset BQL queue when stopping device After a timeout event caused by for example a broadcast storm, when the MAC and PHY are reset, the BQL TX queue needs to be reset as well. Otherwise, the device will exhibit severe performance issues even after the storm has ended. Co-authored-by: David Gounaris Signed-off-by: Mathias Thore Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/ucc_geth.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/freescale/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c index c3d539e209ed..eb3e65e8868f 100644 --- a/drivers/net/ethernet/freescale/ucc_geth.c +++ b/drivers/net/ethernet/freescale/ucc_geth.c @@ -1879,6 +1879,8 @@ static void ucc_geth_free_tx(struct ucc_geth_private *ugeth) u16 i, j; u8 __iomem *bd; + netdev_reset_queue(ugeth->ndev); + ug_info = ugeth->ug_info; uf_info = &ug_info->uf_info; -- cgit v1.2.3 From 8be4d9a492f88b96d4d3a06c6cbedbc40ca14c83 Mon Sep 17 00:00:00 2001 From: Toshiaki Makita Date: Tue, 29 Jan 2019 09:45:53 +0900 Subject: virtio_net: Don't enable NAPI when interface is down Commit 4e09ff536284 ("virtio-net: disable NAPI only when enabled during XDP set") tried to fix inappropriate NAPI enabling/disabling when !netif_running(), but was not complete. On error path virtio_net could enable NAPI even when !netif_running(). This can cause enabling NAPI twice on virtnet_open(), which would trigger BUG_ON() in napi_enable(). Fixes: 4941d472bf95b ("virtio-net: do not reset during XDP set") Signed-off-by: Toshiaki Makita Acked-by: Jason Wang Acked-by: Michael S. Tsirkin Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 8fadd8eaf601..8e4c5d432206 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -2430,8 +2430,10 @@ static int virtnet_xdp_set(struct net_device *dev, struct bpf_prog *prog, return 0; err: - for (i = 0; i < vi->max_queue_pairs; i++) - virtnet_napi_enable(vi->rq[i].vq, &vi->rq[i].napi); + if (netif_running(dev)) { + for (i = 0; i < vi->max_queue_pairs; i++) + virtnet_napi_enable(vi->rq[i].vq, &vi->rq[i].napi); + } if (prog) bpf_prog_sub(prog, vi->max_queue_pairs - 1); return err; -- cgit v1.2.3 From 534da5e856334fb54cb0272a9fb3afec28ea3aed Mon Sep 17 00:00:00 2001 From: Toshiaki Makita Date: Tue, 29 Jan 2019 09:45:54 +0900 Subject: virtio_net: Don't call free_old_xmit_skbs for xdp_frames When napi_tx is enabled, virtnet_poll_cleantx() called free_old_xmit_skbs() even for xdp send queue. This is bogus since the queue has xdp_frames, not sk_buffs, thus mangled device tx bytes counters because skb->len is meaningless value, and even triggered oops due to general protection fault on freeing them. Since xdp send queues do not aquire locks, old xdp_frames should be freed only in virtnet_xdp_xmit(), so just skip free_old_xmit_skbs() for xdp send queues. Similarly virtnet_poll_tx() called free_old_xmit_skbs(). This NAPI handler is called even without calling start_xmit() because cb for tx is by default enabled. Once the handler is called, it enabled the cb again, and then the handler would be called again. We don't need this handler for XDP, so don't enable cb as well as not calling free_old_xmit_skbs(). Also, we need to disable tx NAPI when disabling XDP, so virtnet_poll_tx() can safely access curr_queue_pairs and xdp_queue_pairs, which are not atomically updated while disabling XDP. Fixes: b92f1e6751a6 ("virtio-net: transmit napi") Fixes: 7b0411ef4aa6 ("virtio-net: clean tx descriptors from rx napi") Signed-off-by: Toshiaki Makita Acked-by: Jason Wang Acked-by: Michael S. Tsirkin Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 49 ++++++++++++++++++++++++++++++++---------------- 1 file changed, 33 insertions(+), 16 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 8e4c5d432206..046f955495a8 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -1358,6 +1358,16 @@ static void free_old_xmit_skbs(struct send_queue *sq, bool in_napi) u64_stats_update_end(&sq->stats.syncp); } +static bool is_xdp_raw_buffer_queue(struct virtnet_info *vi, int q) +{ + if (q < (vi->curr_queue_pairs - vi->xdp_queue_pairs)) + return false; + else if (q < vi->curr_queue_pairs) + return true; + else + return false; +} + static void virtnet_poll_cleantx(struct receive_queue *rq) { struct virtnet_info *vi = rq->vq->vdev->priv; @@ -1365,7 +1375,7 @@ static void virtnet_poll_cleantx(struct receive_queue *rq) struct send_queue *sq = &vi->sq[index]; struct netdev_queue *txq = netdev_get_tx_queue(vi->dev, index); - if (!sq->napi.weight) + if (!sq->napi.weight || is_xdp_raw_buffer_queue(vi, index)) return; if (__netif_tx_trylock(txq)) { @@ -1442,8 +1452,16 @@ static int virtnet_poll_tx(struct napi_struct *napi, int budget) { struct send_queue *sq = container_of(napi, struct send_queue, napi); struct virtnet_info *vi = sq->vq->vdev->priv; - struct netdev_queue *txq = netdev_get_tx_queue(vi->dev, vq2txq(sq->vq)); + unsigned int index = vq2txq(sq->vq); + struct netdev_queue *txq; + if (unlikely(is_xdp_raw_buffer_queue(vi, index))) { + /* We don't need to enable cb for XDP */ + napi_complete_done(napi, 0); + return 0; + } + + txq = netdev_get_tx_queue(vi->dev, index); __netif_tx_lock(txq, raw_smp_processor_id()); free_old_xmit_skbs(sq, true); __netif_tx_unlock(txq); @@ -2402,9 +2420,12 @@ static int virtnet_xdp_set(struct net_device *dev, struct bpf_prog *prog, } /* Make sure NAPI is not using any XDP TX queues for RX. */ - if (netif_running(dev)) - for (i = 0; i < vi->max_queue_pairs; i++) + if (netif_running(dev)) { + for (i = 0; i < vi->max_queue_pairs; i++) { napi_disable(&vi->rq[i].napi); + virtnet_napi_tx_disable(&vi->sq[i].napi); + } + } netif_set_real_num_rx_queues(dev, curr_qp + xdp_qp); err = _virtnet_set_queues(vi, curr_qp + xdp_qp); @@ -2423,16 +2444,22 @@ static int virtnet_xdp_set(struct net_device *dev, struct bpf_prog *prog, } if (old_prog) bpf_prog_put(old_prog); - if (netif_running(dev)) + if (netif_running(dev)) { virtnet_napi_enable(vi->rq[i].vq, &vi->rq[i].napi); + virtnet_napi_tx_enable(vi, vi->sq[i].vq, + &vi->sq[i].napi); + } } return 0; err: if (netif_running(dev)) { - for (i = 0; i < vi->max_queue_pairs; i++) + for (i = 0; i < vi->max_queue_pairs; i++) { virtnet_napi_enable(vi->rq[i].vq, &vi->rq[i].napi); + virtnet_napi_tx_enable(vi, vi->sq[i].vq, + &vi->sq[i].napi); + } } if (prog) bpf_prog_sub(prog, vi->max_queue_pairs - 1); @@ -2615,16 +2642,6 @@ static void free_receive_page_frags(struct virtnet_info *vi) put_page(vi->rq[i].alloc_frag.page); } -static bool is_xdp_raw_buffer_queue(struct virtnet_info *vi, int q) -{ - if (q < (vi->curr_queue_pairs - vi->xdp_queue_pairs)) - return false; - else if (q < vi->curr_queue_pairs) - return true; - else - return false; -} - static void free_unused_bufs(struct virtnet_info *vi) { void *buf; -- cgit v1.2.3 From 188313c137c4f76afd0862f50dbc185b198b9e2a Mon Sep 17 00:00:00 2001 From: Toshiaki Makita Date: Tue, 29 Jan 2019 09:45:55 +0900 Subject: virtio_net: Fix not restoring real_num_rx_queues When _virtnet_set_queues() failed we did not restore real_num_rx_queues. Fix this by placing the change of real_num_rx_queues after _virtnet_set_queues(). This order is also in line with virtnet_set_channels(). Fixes: 4941d472bf95 ("virtio-net: do not reset during XDP set") Signed-off-by: Toshiaki Makita Acked-by: Jason Wang Acked-by: Michael S. Tsirkin Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 046f955495a8..0e1a36908419 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -2427,10 +2427,10 @@ static int virtnet_xdp_set(struct net_device *dev, struct bpf_prog *prog, } } - netif_set_real_num_rx_queues(dev, curr_qp + xdp_qp); err = _virtnet_set_queues(vi, curr_qp + xdp_qp); if (err) goto err; + netif_set_real_num_rx_queues(dev, curr_qp + xdp_qp); vi->xdp_queue_pairs = xdp_qp; for (i = 0; i < vi->max_queue_pairs; i++) { -- cgit v1.2.3 From 1667c08a9d31c7cdf09f4890816bfbf20b685495 Mon Sep 17 00:00:00 2001 From: Toshiaki Makita Date: Tue, 29 Jan 2019 09:45:56 +0900 Subject: virtio_net: Fix out of bounds access of sq When XDP is disabled, curr_queue_pairs + smp_processor_id() can be larger than max_queue_pairs. There is no guarantee that we have enough XDP send queues dedicated for each cpu when XDP is disabled, so do not count drops on sq in that case. Fixes: 5b8f3c8d30a6 ("virtio_net: Add XDP related stats") Signed-off-by: Toshiaki Makita Acked-by: Jason Wang Acked-by: Michael S. Tsirkin Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 0e1a36908419..669b65c232a2 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -491,20 +491,17 @@ static int virtnet_xdp_xmit(struct net_device *dev, int ret, err; int i; - sq = virtnet_xdp_sq(vi); - - if (unlikely(flags & ~XDP_XMIT_FLAGS_MASK)) { - ret = -EINVAL; - drops = n; - goto out; - } - /* Only allow ndo_xdp_xmit if XDP is loaded on dev, as this * indicate XDP resources have been successfully allocated. */ xdp_prog = rcu_dereference(rq->xdp_prog); - if (!xdp_prog) { - ret = -ENXIO; + if (!xdp_prog) + return -ENXIO; + + sq = virtnet_xdp_sq(vi); + + if (unlikely(flags & ~XDP_XMIT_FLAGS_MASK)) { + ret = -EINVAL; drops = n; goto out; } -- cgit v1.2.3 From 03aa6d34868c07b2b1b8b2db080602d7ec528173 Mon Sep 17 00:00:00 2001 From: Toshiaki Makita Date: Tue, 29 Jan 2019 09:45:57 +0900 Subject: virtio_net: Don't process redirected XDP frames when XDP is disabled Commit 8dcc5b0ab0ec ("virtio_net: fix ndo_xdp_xmit crash towards dev not ready for XDP") tried to avoid access to unexpected sq while XDP is disabled, but was not complete. There was a small window which causes out of bounds sq access in virtnet_xdp_xmit() while disabling XDP. An example case of - curr_queue_pairs = 6 (2 for SKB and 4 for XDP) - online_cpu_num = xdp_queue_paris = 4 when XDP is enabled: CPU 0 CPU 1 (Disabling XDP) (Processing redirected XDP frames) virtnet_xdp_xmit() virtnet_xdp_set() _virtnet_set_queues() set curr_queue_pairs (2) check if rq->xdp_prog is not NULL virtnet_xdp_sq(vi) qp = curr_queue_pairs - xdp_queue_pairs + smp_processor_id() = 2 - 4 + 1 = -1 sq = &vi->sq[qp] // out of bounds access set xdp_queue_pairs (0) rq->xdp_prog = NULL Basically we should not change curr_queue_pairs and xdp_queue_pairs while someone can read the values. Thus, when disabling XDP, assign NULL to rq->xdp_prog first, and wait for RCU grace period, then change xxx_queue_pairs. Note that we need to keep the current order when enabling XDP though. - v2: Make rcu_assign_pointer/synchronize_net conditional instead of _virtnet_set_queues. Fixes: 186b3c998c50 ("virtio-net: support XDP_REDIRECT") Signed-off-by: Toshiaki Makita Acked-by: Jason Wang Acked-by: Michael S. Tsirkin Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 33 ++++++++++++++++++++++++++------- 1 file changed, 26 insertions(+), 7 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 669b65c232a2..cea52e47dc65 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -2410,6 +2410,10 @@ static int virtnet_xdp_set(struct net_device *dev, struct bpf_prog *prog, return -ENOMEM; } + old_prog = rtnl_dereference(vi->rq[0].xdp_prog); + if (!prog && !old_prog) + return 0; + if (prog) { prog = bpf_prog_add(prog, vi->max_queue_pairs - 1); if (IS_ERR(prog)) @@ -2424,21 +2428,30 @@ static int virtnet_xdp_set(struct net_device *dev, struct bpf_prog *prog, } } + if (!prog) { + for (i = 0; i < vi->max_queue_pairs; i++) { + rcu_assign_pointer(vi->rq[i].xdp_prog, prog); + if (i == 0) + virtnet_restore_guest_offloads(vi); + } + synchronize_net(); + } + err = _virtnet_set_queues(vi, curr_qp + xdp_qp); if (err) goto err; netif_set_real_num_rx_queues(dev, curr_qp + xdp_qp); vi->xdp_queue_pairs = xdp_qp; - for (i = 0; i < vi->max_queue_pairs; i++) { - old_prog = rtnl_dereference(vi->rq[i].xdp_prog); - rcu_assign_pointer(vi->rq[i].xdp_prog, prog); - if (i == 0) { - if (!old_prog) + if (prog) { + for (i = 0; i < vi->max_queue_pairs; i++) { + rcu_assign_pointer(vi->rq[i].xdp_prog, prog); + if (i == 0 && !old_prog) virtnet_clear_guest_offloads(vi); - if (!prog) - virtnet_restore_guest_offloads(vi); } + } + + for (i = 0; i < vi->max_queue_pairs; i++) { if (old_prog) bpf_prog_put(old_prog); if (netif_running(dev)) { @@ -2451,6 +2464,12 @@ static int virtnet_xdp_set(struct net_device *dev, struct bpf_prog *prog, return 0; err: + if (!prog) { + virtnet_clear_guest_offloads(vi); + for (i = 0; i < vi->max_queue_pairs; i++) + rcu_assign_pointer(vi->rq[i].xdp_prog, old_prog); + } + if (netif_running(dev)) { for (i = 0; i < vi->max_queue_pairs; i++) { virtnet_napi_enable(vi->rq[i].vq, &vi->rq[i].napi); -- cgit v1.2.3 From 07b344f494ddda9f061b396407c96df8c46c82b5 Mon Sep 17 00:00:00 2001 From: Toshiaki Makita Date: Tue, 29 Jan 2019 09:45:58 +0900 Subject: virtio_net: Use xdp_return_frame to free xdp_frames on destroying vqs put_page() can work as a fallback for freeing xdp_frames, but the appropriate way is to use xdp_return_frame(). Fixes: cac320c850ef ("virtio_net: convert to use generic xdp_frame and xdp_return_frame API") Signed-off-by: Toshiaki Makita Acked-by: Jason Wang Acked-by: Jesper Dangaard Brouer Acked-by: Michael S. Tsirkin Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index cea52e47dc65..1d454cee641c 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -2669,7 +2669,7 @@ static void free_unused_bufs(struct virtnet_info *vi) if (!is_xdp_raw_buffer_queue(vi, i)) dev_kfree_skb(buf); else - put_page(virt_to_head_page(buf)); + xdp_return_frame(buf); } } -- cgit v1.2.3 From 5050471d35d1316ba32dfcbb409978337eb9e75e Mon Sep 17 00:00:00 2001 From: Toshiaki Makita Date: Tue, 29 Jan 2019 09:45:59 +0900 Subject: virtio_net: Differentiate sk_buff and xdp_frame on freeing We do not reset or free up unused buffers when enabling/disabling XDP, so it can happen that xdp_frames are freed after disabling XDP or sk_buffs are freed after enabling XDP on xdp tx queues. Thus we need to handle both forms (xdp_frames and sk_buffs) regardless of XDP setting. One way to trigger this problem is to disable XDP when napi_tx is enabled. In that case, virtnet_xdp_set() calls virtnet_napi_enable() which kicks NAPI. The NAPI handler will call virtnet_poll_cleantx() which invokes free_old_xmit_skbs() for queues which have been used by XDP. Note that even with this change we need to keep skipping free_old_xmit_skbs() from NAPI handlers when XDP is enabled, because XDP tx queues do not aquire queue locks. - v2: Use napi_consume_skb() instead of dev_consume_skb_any() Fixes: 4941d472bf95 ("virtio-net: do not reset during XDP set") Signed-off-by: Toshiaki Makita Acked-by: Jason Wang Acked-by: Michael S. Tsirkin Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 54 +++++++++++++++++++++++++++++++++++++----------- 1 file changed, 42 insertions(+), 12 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 1d454cee641c..259448182272 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -57,6 +57,8 @@ module_param(napi_tx, bool, 0644); #define VIRTIO_XDP_TX BIT(0) #define VIRTIO_XDP_REDIR BIT(1) +#define VIRTIO_XDP_FLAG BIT(0) + /* RX packet size EWMA. The average packet size is used to determine the packet * buffer size when refilling RX rings. As the entire RX ring may be refilled * at once, the weight is chosen so that the EWMA will be insensitive to short- @@ -252,6 +254,21 @@ struct padded_vnet_hdr { char padding[4]; }; +static bool is_xdp_frame(void *ptr) +{ + return (unsigned long)ptr & VIRTIO_XDP_FLAG; +} + +static void *xdp_to_ptr(struct xdp_frame *ptr) +{ + return (void *)((unsigned long)ptr | VIRTIO_XDP_FLAG); +} + +static struct xdp_frame *ptr_to_xdp(void *ptr) +{ + return (struct xdp_frame *)((unsigned long)ptr & ~VIRTIO_XDP_FLAG); +} + /* Converting between virtqueue no. and kernel tx/rx queue no. * 0:rx0 1:tx0 2:rx1 3:tx1 ... 2N:rxN 2N+1:txN 2N+2:cvq */ @@ -462,7 +479,8 @@ static int __virtnet_xdp_xmit_one(struct virtnet_info *vi, sg_init_one(sq->sg, xdpf->data, xdpf->len); - err = virtqueue_add_outbuf(sq->vq, sq->sg, 1, xdpf, GFP_ATOMIC); + err = virtqueue_add_outbuf(sq->vq, sq->sg, 1, xdp_to_ptr(xdpf), + GFP_ATOMIC); if (unlikely(err)) return -ENOSPC; /* Caller handle free/refcnt */ @@ -482,13 +500,13 @@ static int virtnet_xdp_xmit(struct net_device *dev, { struct virtnet_info *vi = netdev_priv(dev); struct receive_queue *rq = vi->rq; - struct xdp_frame *xdpf_sent; struct bpf_prog *xdp_prog; struct send_queue *sq; unsigned int len; int drops = 0; int kicks = 0; int ret, err; + void *ptr; int i; /* Only allow ndo_xdp_xmit if XDP is loaded on dev, as this @@ -507,8 +525,12 @@ static int virtnet_xdp_xmit(struct net_device *dev, } /* Free up any pending old buffers before queueing new ones. */ - while ((xdpf_sent = virtqueue_get_buf(sq->vq, &len)) != NULL) - xdp_return_frame(xdpf_sent); + while ((ptr = virtqueue_get_buf(sq->vq, &len)) != NULL) { + if (likely(is_xdp_frame(ptr))) + xdp_return_frame(ptr_to_xdp(ptr)); + else + napi_consume_skb(ptr, false); + } for (i = 0; i < n; i++) { struct xdp_frame *xdpf = frames[i]; @@ -1329,18 +1351,26 @@ static int virtnet_receive(struct receive_queue *rq, int budget, static void free_old_xmit_skbs(struct send_queue *sq, bool in_napi) { - struct sk_buff *skb; unsigned int len; unsigned int packets = 0; unsigned int bytes = 0; + void *ptr; - while ((skb = virtqueue_get_buf(sq->vq, &len)) != NULL) { - pr_debug("Sent skb %p\n", skb); + while ((ptr = virtqueue_get_buf(sq->vq, &len)) != NULL) { + if (likely(!is_xdp_frame(ptr))) { + struct sk_buff *skb = ptr; - bytes += skb->len; - packets++; + pr_debug("Sent skb %p\n", skb); - napi_consume_skb(skb, in_napi); + bytes += skb->len; + napi_consume_skb(skb, in_napi); + } else { + struct xdp_frame *frame = ptr_to_xdp(ptr); + + bytes += frame->len; + xdp_return_frame(frame); + } + packets++; } /* Avoid overhead when no packets have been processed @@ -2666,10 +2696,10 @@ static void free_unused_bufs(struct virtnet_info *vi) for (i = 0; i < vi->max_queue_pairs; i++) { struct virtqueue *vq = vi->sq[i].vq; while ((buf = virtqueue_detach_unused_buf(vq)) != NULL) { - if (!is_xdp_raw_buffer_queue(vi, i)) + if (!is_xdp_frame(buf)) dev_kfree_skb(buf); else - xdp_return_frame(buf); + xdp_return_frame(ptr_to_xdp(buf)); } } -- cgit v1.2.3 From 3a03cb8456cc1d61c467a5375e0a10e5207b948c Mon Sep 17 00:00:00 2001 From: George Amanakis Date: Tue, 29 Jan 2019 22:50:13 -0500 Subject: tun: move the call to tun_set_real_num_queues Call tun_set_real_num_queues() after the increment of tun->numqueues since the former depends on it. Otherwise, the number of queues is not correctly accounted for, which results to warnings similar to: "vnet0 selects TX queue 11, but real number of TX queues is 11". Fixes: 0b7959b62573 ("tun: publish tfile after it's fully initialized") Reported-and-tested-by: George Amanakis Signed-off-by: George Amanakis Signed-off-by: Stanislav Fomichev Signed-off-by: David S. Miller --- drivers/net/tun.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/tun.c b/drivers/net/tun.c index 18656c4094b3..fed298c0cb39 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -866,8 +866,6 @@ static int tun_attach(struct tun_struct *tun, struct file *file, if (rtnl_dereference(tun->xdp_prog)) sock_set_flag(&tfile->sk, SOCK_XDP); - tun_set_real_num_queues(tun); - /* device is allowed to go away first, so no need to hold extra * refcnt. */ @@ -879,6 +877,7 @@ static int tun_attach(struct tun_struct *tun, struct file *file, rcu_assign_pointer(tfile->tun, tun); rcu_assign_pointer(tun->tfiles[tun->numqueues], tfile); tun->numqueues++; + tun_set_real_num_queues(tun); out: return err; } -- cgit v1.2.3 From d5256083f62e2720f75bb3c5a928a0afe47d6bc3 Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Wed, 30 Jan 2019 12:49:48 +0100 Subject: ipvlan, l3mdev: fix broken l3s mode wrt local routes While implementing ipvlan l3 and l3s mode for kubernetes CNI plugin, I ran into the issue that while l3 mode is working fine, l3s mode does not have any connectivity to kube-apiserver and hence all pods end up in Error state as well. The ipvlan master device sits on top of a bond device and hostns traffic to kube-apiserver (also running in hostns) is DNATed from 10.152.183.1:443 to 139.178.29.207:37573 where the latter is the address of the bond0. While in l3 mode, a curl to https://10.152.183.1:443 or to https://139.178.29.207:37573 works fine from hostns, neither of them do in case of l3s. In the latter only a curl to https://127.0.0.1:37573 appeared to work where for local addresses of bond0 I saw kernel suddenly starting to emit ARP requests to query HW address of bond0 which remained unanswered and neighbor entries in INCOMPLETE state. These ARP requests only happen while in l3s. Debugging this further, I found the issue is that l3s mode is piggy- backing on l3 master device, and in this case local routes are using l3mdev_master_dev_rcu(dev) instead of net->loopback_dev as per commit f5a0aab84b74 ("net: ipv4: dst for local input routes should use l3mdev if relevant") and 5f02ce24c269 ("net: l3mdev: Allow the l3mdev to be a loopback"). I found that reverting them back into using the net->loopback_dev fixed ipvlan l3s connectivity and got everything working for the CNI. Now judging from 4fbae7d83c98 ("ipvlan: Introduce l3s mode") and the l3mdev paper in [0] the only sole reason why ipvlan l3s is relying on l3 master device is to get the l3mdev_ip_rcv() receive hook for setting the dst entry of the input route without adding its own ipvlan specific hacks into the receive path, however, any l3 domain semantics beyond just that are breaking l3s operation. Note that ipvlan also has the ability to dynamically switch its internal operation from l3 to l3s for all ports via ipvlan_set_port_mode() at runtime. In any case, l3 vs l3s soley distinguishes itself by 'de-confusing' netfilter through switching skb->dev to ipvlan slave device late in NF_INET_LOCAL_IN before handing the skb to L4. Minimal fix taken here is to add a IFF_L3MDEV_RX_HANDLER flag which, if set from ipvlan setup, gets us only the wanted l3mdev_l3_rcv() hook without any additional l3mdev semantics on top. This should also have minimal impact since dev->priv_flags is already hot in cache. With this set, l3s mode is working fine and I also get things like masquerading pod traffic on the ipvlan master properly working. [0] https://netdevconf.org/1.2/papers/ahern-what-is-l3mdev-paper.pdf Fixes: f5a0aab84b74 ("net: ipv4: dst for local input routes should use l3mdev if relevant") Fixes: 5f02ce24c269 ("net: l3mdev: Allow the l3mdev to be a loopback") Fixes: 4fbae7d83c98 ("ipvlan: Introduce l3s mode") Signed-off-by: Daniel Borkmann Cc: Mahesh Bandewar Cc: David Ahern Cc: Florian Westphal Cc: Martynas Pumputis Acked-by: David Ahern Signed-off-by: David S. Miller --- drivers/net/ipvlan/ipvlan_main.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ipvlan/ipvlan_main.c b/drivers/net/ipvlan/ipvlan_main.c index 19bdde60680c..7cdac77d0c68 100644 --- a/drivers/net/ipvlan/ipvlan_main.c +++ b/drivers/net/ipvlan/ipvlan_main.c @@ -100,12 +100,12 @@ static int ipvlan_set_port_mode(struct ipvl_port *port, u16 nval, err = ipvlan_register_nf_hook(read_pnet(&port->pnet)); if (!err) { mdev->l3mdev_ops = &ipvl_l3mdev_ops; - mdev->priv_flags |= IFF_L3MDEV_MASTER; + mdev->priv_flags |= IFF_L3MDEV_RX_HANDLER; } else goto fail; } else if (port->mode == IPVLAN_MODE_L3S) { /* Old mode was L3S */ - mdev->priv_flags &= ~IFF_L3MDEV_MASTER; + mdev->priv_flags &= ~IFF_L3MDEV_RX_HANDLER; ipvlan_unregister_nf_hook(read_pnet(&port->pnet)); mdev->l3mdev_ops = NULL; } @@ -167,7 +167,7 @@ static void ipvlan_port_destroy(struct net_device *dev) struct sk_buff *skb; if (port->mode == IPVLAN_MODE_L3S) { - dev->priv_flags &= ~IFF_L3MDEV_MASTER; + dev->priv_flags &= ~IFF_L3MDEV_RX_HANDLER; ipvlan_unregister_nf_hook(dev_net(dev)); dev->l3mdev_ops = NULL; } -- cgit v1.2.3 From 4ec5302fa906ec9d86597b236f62315bacdb9622 Mon Sep 17 00:00:00 2001 From: Jose Abreu Date: Wed, 30 Jan 2019 15:54:19 +0100 Subject: net: stmmac: Fallback to Platform Data clock in Watchdog conversion If we don't have DT then stmmac_clk will not be available. Let's add a new Platform Data field so that we can specify the refclk by this mean. This way we can still use the coalesce command in PCI based setups. Signed-off-by: Jose Abreu Cc: Joao Pinto Cc: David S. Miller Cc: Giuseppe Cavallaro Cc: Alexandre Torgue Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c index d1f61c25d82b..5d85742a2be0 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c @@ -721,8 +721,11 @@ static u32 stmmac_usec2riwt(u32 usec, struct stmmac_priv *priv) { unsigned long clk = clk_get_rate(priv->plat->stmmac_clk); - if (!clk) - return 0; + if (!clk) { + clk = priv->plat->clk_ref_rate; + if (!clk) + return 0; + } return (usec * (clk / 1000000)) / 256; } @@ -731,8 +734,11 @@ static u32 stmmac_riwt2usec(u32 riwt, struct stmmac_priv *priv) { unsigned long clk = clk_get_rate(priv->plat->stmmac_clk); - if (!clk) - return 0; + if (!clk) { + clk = priv->plat->clk_ref_rate; + if (!clk) + return 0; + } return (riwt * 256) / (clk / 1000000); } -- cgit v1.2.3 From c5acdbee22a1b200dde07effd26fd1f649e9ab8a Mon Sep 17 00:00:00 2001 From: Jose Abreu Date: Wed, 30 Jan 2019 15:54:20 +0100 Subject: net: stmmac: Send TSO packets always from Queue 0 The number of TSO enabled channels in HW can be different than the number of total channels. There is no way to determined, at runtime, the number of TSO capable channels and its safe to assume that if TSO is enabled then at least channel 0 will be TSO capable. Lets always send TSO packets from Queue 0. Signed-off-by: Jose Abreu Cc: Joao Pinto Cc: David S. Miller Cc: Giuseppe Cavallaro Cc: Alexandre Torgue Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 5afba69981cf..6656008068de 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -3025,8 +3025,17 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev) /* Manage oversized TCP frames for GMAC4 device */ if (skb_is_gso(skb) && priv->tso) { - if (skb_shinfo(skb)->gso_type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6)) + if (skb_shinfo(skb)->gso_type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6)) { + /* + * There is no way to determine the number of TSO + * capable Queues. Let's use always the Queue 0 + * because if TSO is supported then at least this + * one will be capable. + */ + skb_set_queue_mapping(skb, 0); + return stmmac_tso_xmit(skb, dev); + } } if (unlikely(stmmac_tx_avail(priv, queue) < nfrags + 1)) { -- cgit v1.2.3 From e2cd682deb231ba6f80524bb84e57e7138261149 Mon Sep 17 00:00:00 2001 From: Jose Abreu Date: Wed, 30 Jan 2019 15:54:21 +0100 Subject: net: stmmac: Disable EEE mode earlier in XMIT callback In stmmac xmit callback we use a different flow for TSO packets but TSO xmit callback is not disabling the EEE mode. Fix this by disabling earlier the EEE mode, i.e. before calling the TSO xmit callback. Signed-off-by: Jose Abreu Cc: Joao Pinto Cc: David S. Miller Cc: Giuseppe Cavallaro Cc: Alexandre Torgue Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 6656008068de..685d20472358 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -3023,6 +3023,9 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev) tx_q = &priv->tx_queue[queue]; + if (priv->tx_path_in_lpi_mode) + stmmac_disable_eee_mode(priv); + /* Manage oversized TCP frames for GMAC4 device */ if (skb_is_gso(skb) && priv->tso) { if (skb_shinfo(skb)->gso_type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6)) { @@ -3050,9 +3053,6 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev) return NETDEV_TX_BUSY; } - if (priv->tx_path_in_lpi_mode) - stmmac_disable_eee_mode(priv); - entry = tx_q->cur_tx; first_entry = entry; WARN_ON(tx_q->tx_skbuff[first_entry]); -- cgit v1.2.3 From 34aaaac815d166daef361f49529f4c6b77da49f1 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Mon, 14 Jan 2019 15:48:34 +0000 Subject: ieee802154: mcr20a: fix indentation, remove tabs The are a couple of statments that are one level too deep, fix this by removing tabs. Signed-off-by: Colin Ian King Signed-off-by: Stefan Schmidt --- drivers/net/ieee802154/mcr20a.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ieee802154/mcr20a.c b/drivers/net/ieee802154/mcr20a.c index 44de81e5f140..c589f5ae75bb 100644 --- a/drivers/net/ieee802154/mcr20a.c +++ b/drivers/net/ieee802154/mcr20a.c @@ -905,9 +905,9 @@ mcr20a_irq_clean_complete(void *context) } break; case (DAR_IRQSTS1_RXIRQ | DAR_IRQSTS1_SEQIRQ): - /* rx is starting */ - dev_dbg(printdev(lp), "RX is starting\n"); - mcr20a_handle_rx(lp); + /* rx is starting */ + dev_dbg(printdev(lp), "RX is starting\n"); + mcr20a_handle_rx(lp); break; case (DAR_IRQSTS1_RXIRQ | DAR_IRQSTS1_TXIRQ | DAR_IRQSTS1_SEQIRQ): if (lp->is_tx) { -- cgit v1.2.3 From 05672636b339c557feb6a98b2f2034be790aa4fb Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Sun, 27 Jan 2019 12:15:49 +0100 Subject: mt76x0: eeprom: fix chan_vs_power map in mt76x0_get_power_info Report correct eeprom per channel power value. Fix chan_vs_power map in mt76x0_get_power_info routine Fixes: f2a2e819d672 ("mt76x0: remove eeprom dependency from mt76x0_get_power_info") Signed-off-by: Lorenzo Bianconi Signed-off-by: Kalle Valo --- drivers/net/wireless/mediatek/mt76/mt76x0/eeprom.c | 40 ++++++++++------------ drivers/net/wireless/mediatek/mt76/mt76x0/eeprom.h | 2 +- drivers/net/wireless/mediatek/mt76/mt76x0/phy.c | 10 +++--- 3 files changed, 25 insertions(+), 27 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/eeprom.c b/drivers/net/wireless/mediatek/mt76/mt76x0/eeprom.c index 497e762978cc..b2cabce1d74d 100644 --- a/drivers/net/wireless/mediatek/mt76/mt76x0/eeprom.c +++ b/drivers/net/wireless/mediatek/mt76/mt76x0/eeprom.c @@ -212,24 +212,24 @@ void mt76x0_get_tx_power_per_rate(struct mt76x02_dev *dev) mt76x02_add_rate_power_offset(t, delta); } -void mt76x0_get_power_info(struct mt76x02_dev *dev, u8 *info) +void mt76x0_get_power_info(struct mt76x02_dev *dev, s8 *tp) { struct mt76x0_chan_map { u8 chan; u8 offset; } chan_map[] = { - { 2, 0 }, { 4, 1 }, { 6, 2 }, { 8, 3 }, - { 10, 4 }, { 12, 5 }, { 14, 6 }, { 38, 0 }, - { 44, 1 }, { 48, 2 }, { 54, 3 }, { 60, 4 }, - { 64, 5 }, { 102, 6 }, { 108, 7 }, { 112, 8 }, - { 118, 9 }, { 124, 10 }, { 128, 11 }, { 134, 12 }, - { 140, 13 }, { 151, 14 }, { 157, 15 }, { 161, 16 }, - { 167, 17 }, { 171, 18 }, { 173, 19 }, + { 2, 0 }, { 4, 2 }, { 6, 4 }, { 8, 6 }, + { 10, 8 }, { 12, 10 }, { 14, 12 }, { 38, 0 }, + { 44, 2 }, { 48, 4 }, { 54, 6 }, { 60, 8 }, + { 64, 10 }, { 102, 12 }, { 108, 14 }, { 112, 16 }, + { 118, 18 }, { 124, 20 }, { 128, 22 }, { 134, 24 }, + { 140, 26 }, { 151, 28 }, { 157, 30 }, { 161, 32 }, + { 167, 34 }, { 171, 36 }, { 175, 38 }, }; struct ieee80211_channel *chan = dev->mt76.chandef.chan; u8 offset, addr; + int i, idx = 0; u16 data; - int i; if (mt76x0_tssi_enabled(dev)) { s8 target_power; @@ -239,14 +239,14 @@ void mt76x0_get_power_info(struct mt76x02_dev *dev, u8 *info) else data = mt76x02_eeprom_get(dev, MT_EE_2G_TARGET_POWER); target_power = (data & 0xff) - dev->mt76.rate_power.ofdm[7]; - info[0] = target_power + mt76x0_get_delta(dev); - info[1] = 0; + *tp = target_power + mt76x0_get_delta(dev); return; } for (i = 0; i < ARRAY_SIZE(chan_map); i++) { - if (chan_map[i].chan <= chan->hw_value) { + if (chan->hw_value <= chan_map[i].chan) { + idx = (chan->hw_value == chan_map[i].chan); offset = chan_map[i].offset; break; } @@ -258,13 +258,16 @@ void mt76x0_get_power_info(struct mt76x02_dev *dev, u8 *info) addr = MT_EE_TX_POWER_DELTA_BW80 + offset; } else { switch (chan->hw_value) { + case 42: + offset = 2; + break; case 58: offset = 8; break; case 106: offset = 14; break; - case 112: + case 122: offset = 20; break; case 155: @@ -277,14 +280,9 @@ void mt76x0_get_power_info(struct mt76x02_dev *dev, u8 *info) } data = mt76x02_eeprom_get(dev, addr); - - info[0] = data; - if (!info[0] || info[0] > 0x3f) - info[0] = 5; - - info[1] = data >> 8; - if (!info[1] || info[1] > 0x3f) - info[1] = 5; + *tp = data >> (8 * idx); + if (*tp < 0 || *tp > 0x3f) + *tp = 5; } static int mt76x0_check_eeprom(struct mt76x02_dev *dev) diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/eeprom.h b/drivers/net/wireless/mediatek/mt76/mt76x0/eeprom.h index ee9ade9f3c8b..42b259f90b6d 100644 --- a/drivers/net/wireless/mediatek/mt76/mt76x0/eeprom.h +++ b/drivers/net/wireless/mediatek/mt76/mt76x0/eeprom.h @@ -26,7 +26,7 @@ struct mt76x02_dev; int mt76x0_eeprom_init(struct mt76x02_dev *dev); void mt76x0_read_rx_gain(struct mt76x02_dev *dev); void mt76x0_get_tx_power_per_rate(struct mt76x02_dev *dev); -void mt76x0_get_power_info(struct mt76x02_dev *dev, u8 *info); +void mt76x0_get_power_info(struct mt76x02_dev *dev, s8 *tp); static inline s8 s6_to_s8(u32 val) { diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c b/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c index 1eb1a802ed20..b6166703ad76 100644 --- a/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c +++ b/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c @@ -845,17 +845,17 @@ static void mt76x0_phy_tssi_calibrate(struct mt76x02_dev *dev) void mt76x0_phy_set_txpower(struct mt76x02_dev *dev) { struct mt76_rate_power *t = &dev->mt76.rate_power; - u8 info[2]; + s8 info; mt76x0_get_tx_power_per_rate(dev); - mt76x0_get_power_info(dev, info); + mt76x0_get_power_info(dev, &info); - mt76x02_add_rate_power_offset(t, info[0]); + mt76x02_add_rate_power_offset(t, info); mt76x02_limit_rate_power(t, dev->mt76.txpower_conf); dev->mt76.txpower_cur = mt76x02_get_max_rate_power(t); - mt76x02_add_rate_power_offset(t, -info[0]); + mt76x02_add_rate_power_offset(t, -info); - mt76x02_phy_set_txpower(dev, info[0], info[1]); + mt76x02_phy_set_txpower(dev, info, info); } void mt76x0_phy_calibrate(struct mt76x02_dev *dev, bool power_on) -- cgit v1.2.3 From 2c2008a63e482654ab137c84d3c61c03b75e7df6 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Tue, 29 Jan 2019 15:12:01 -0800 Subject: ath10k: correct bus type for WCN3990 WCN3990 is SNOC, not PCI. This prevents probing WCN3990. Fixes: 367c899f622c ("ath10k: add bus type check in ath10k_init_hw_params") Signed-off-by: Brian Norris Reviewed-by: Bjorn Andersson Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath10k/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c index 399b501f3c3c..e8891f5fc83a 100644 --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c @@ -548,7 +548,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { { .id = WCN3990_HW_1_0_DEV_VERSION, .dev_id = 0, - .bus = ATH10K_BUS_PCI, + .bus = ATH10K_BUS_SNOC, .name = "wcn3990 hw1.0", .continuous_frag_desc = true, .tx_chain_mask = 0x7, -- cgit v1.2.3 From 5e66e35aab335b83d9ffb220d8a3a13986a7a60e Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Thu, 31 Jan 2019 14:31:48 -0500 Subject: bnxt_en: Disable interrupts when allocating CP rings or NQs. When calling firmware to allocate a CP ring or NQ, an interrupt associated with that ring may be generated immediately before the doorbell is even setup after the firmware call returns. When servicing the interrupt, the driver may crash when trying to access the doorbell. Fix it by disabling interrupt on that vector until the doorbell is set up. Fixes: 697197e5a173 ("bnxt_en: Re-structure doorbells.") Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index 6a512871176b..8bc7e495b027 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -4973,12 +4973,18 @@ static int bnxt_hwrm_ring_alloc(struct bnxt *bp) struct bnxt_cp_ring_info *cpr = &bnapi->cp_ring; struct bnxt_ring_struct *ring = &cpr->cp_ring_struct; u32 map_idx = ring->map_idx; + unsigned int vector; + vector = bp->irq_tbl[map_idx].vector; + disable_irq_nosync(vector); rc = hwrm_ring_alloc_send_msg(bp, ring, type, map_idx); - if (rc) + if (rc) { + enable_irq(vector); goto err_out; + } bnxt_set_db(bp, &cpr->cp_db, type, map_idx, ring->fw_ring_id); bnxt_db_nq(bp, &cpr->cp_db, cpr->cp_raw_cons); + enable_irq(vector); bp->grp_info[i].cp_fw_ring_id = ring->fw_ring_id; if (!i) { -- cgit v1.2.3 From 294c149a209c6196c2de85f512b52ef50f519949 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 1 Feb 2019 11:28:16 +0300 Subject: skge: potential memory corruption in skge_get_regs() The "p" buffer is 0x4000 bytes long. B3_RI_WTO_R1 is 0x190. The value of "regs->len" is in the 1-0x4000 range. The bug here is that "regs->len - B3_RI_WTO_R1" can be a negative value which would lead to memory corruption and an abrupt crash. Fixes: c3f8be961808 ("[PATCH] skge: expand ethtool debug register dump") Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/skge.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/marvell/skge.c b/drivers/net/ethernet/marvell/skge.c index 04fd1f135011..654ac534b10e 100644 --- a/drivers/net/ethernet/marvell/skge.c +++ b/drivers/net/ethernet/marvell/skge.c @@ -152,8 +152,10 @@ static void skge_get_regs(struct net_device *dev, struct ethtool_regs *regs, memset(p, 0, regs->len); memcpy_fromio(p, io, B3_RAM_ADDR); - memcpy_fromio(p + B3_RI_WTO_R1, io + B3_RI_WTO_R1, - regs->len - B3_RI_WTO_R1); + if (regs->len > B3_RI_WTO_R1) { + memcpy_fromio(p + B3_RI_WTO_R1, io + B3_RI_WTO_R1, + regs->len - B3_RI_WTO_R1); + } } /* Wake on Lan only supported on Yukon chips with rev 1 or above */ -- cgit v1.2.3 From 7596175e99b3d4bce28022193efd954c201a782a Mon Sep 17 00:00:00 2001 From: Govindarajulu Varadarajan Date: Wed, 30 Jan 2019 06:59:00 -0800 Subject: enic: fix checksum validation for IPv6 In case of IPv6 pkts, ipv4_csum_ok is 0. Because of this, driver does not set skb->ip_summed. So IPv6 rx checksum is not offloaded. Signed-off-by: Govindarajulu Varadarajan Signed-off-by: David S. Miller --- drivers/net/ethernet/cisco/enic/enic_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/cisco/enic/enic_main.c b/drivers/net/ethernet/cisco/enic/enic_main.c index 60641e202534..9a7f70db20c7 100644 --- a/drivers/net/ethernet/cisco/enic/enic_main.c +++ b/drivers/net/ethernet/cisco/enic/enic_main.c @@ -1434,7 +1434,8 @@ static void enic_rq_indicate_buf(struct vnic_rq *rq, * csum is correct or is zero. */ if ((netdev->features & NETIF_F_RXCSUM) && !csum_not_calc && - tcp_udp_csum_ok && ipv4_csum_ok && outer_csum_ok) { + tcp_udp_csum_ok && outer_csum_ok && + (ipv4_csum_ok || ipv6)) { skb->ip_summed = CHECKSUM_UNNECESSARY; skb->csum_level = encap; } -- cgit v1.2.3 From c14f07c6211cc01d52ed92cce1fade5071b8d197 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 31 Jan 2019 16:59:46 +0000 Subject: Revert "net: phy: marvell: avoid pause mode on SGMII-to-Copper for 88e151x" This reverts commit 6623c0fba10ef45b64ca213ad5dec926f37fa9a0. The original diagnosis was incorrect: it appears that the NIC had PHY polling mode enabled, which meant that it overwrote the PHYs advertisement register during negotiation. Signed-off-by: Russell King Tested-by: Yonglong Liu Signed-off-by: David S. Miller --- drivers/net/phy/marvell.c | 16 ---------------- 1 file changed, 16 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index 2e12f982534f..abb7876a8776 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -847,7 +847,6 @@ static int m88e1510_config_init(struct phy_device *phydev) /* SGMII-to-Copper mode initialization */ if (phydev->interface == PHY_INTERFACE_MODE_SGMII) { - /* Select page 18 */ err = marvell_set_page(phydev, 18); if (err < 0) @@ -870,21 +869,6 @@ static int m88e1510_config_init(struct phy_device *phydev) err = marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE); if (err < 0) return err; - - /* There appears to be a bug in the 88e1512 when used in - * SGMII to copper mode, where the AN advertisement register - * clears the pause bits each time a negotiation occurs. - * This means we can never be truely sure what was advertised, - * so disable Pause support. - */ - linkmode_clear_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, - phydev->supported); - linkmode_clear_bit(ETHTOOL_LINK_MODE_Pause_BIT, - phydev->supported); - linkmode_clear_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, - phydev->advertising); - linkmode_clear_bit(ETHTOOL_LINK_MODE_Pause_BIT, - phydev->advertising); } return m88e1318_config_init(phydev); -- cgit v1.2.3 From 8dfb8d2cceb76b74ad5b58cc65c75994329b4d5e Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 1 Feb 2019 13:23:38 -0800 Subject: net: systemport: Fix WoL with password after deep sleep Broadcom STB chips support a deep sleep mode where all register contents are lost. Because we were stashing the MagicPacket password into some of these registers a suspend into that deep sleep then a resumption would not lead to being able to wake-up from MagicPacket with password again. Fix this by keeping a software copy of the password and program it during suspend. Fixes: 83e82f4c706b ("net: systemport: add Wake-on-LAN support") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bcmsysport.c | 25 ++++++++++--------------- drivers/net/ethernet/broadcom/bcmsysport.h | 2 ++ 2 files changed, 12 insertions(+), 15 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/bcmsysport.c b/drivers/net/ethernet/broadcom/bcmsysport.c index f9521d0274b7..28c9b0bdf2f6 100644 --- a/drivers/net/ethernet/broadcom/bcmsysport.c +++ b/drivers/net/ethernet/broadcom/bcmsysport.c @@ -520,7 +520,6 @@ static void bcm_sysport_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) { struct bcm_sysport_priv *priv = netdev_priv(dev); - u32 reg; wol->supported = WAKE_MAGIC | WAKE_MAGICSECURE | WAKE_FILTER; wol->wolopts = priv->wolopts; @@ -528,11 +527,7 @@ static void bcm_sysport_get_wol(struct net_device *dev, if (!(priv->wolopts & WAKE_MAGICSECURE)) return; - /* Return the programmed SecureOn password */ - reg = umac_readl(priv, UMAC_PSW_MS); - put_unaligned_be16(reg, &wol->sopass[0]); - reg = umac_readl(priv, UMAC_PSW_LS); - put_unaligned_be32(reg, &wol->sopass[2]); + memcpy(wol->sopass, priv->sopass, sizeof(priv->sopass)); } static int bcm_sysport_set_wol(struct net_device *dev, @@ -548,13 +543,8 @@ static int bcm_sysport_set_wol(struct net_device *dev, if (wol->wolopts & ~supported) return -EINVAL; - /* Program the SecureOn password */ - if (wol->wolopts & WAKE_MAGICSECURE) { - umac_writel(priv, get_unaligned_be16(&wol->sopass[0]), - UMAC_PSW_MS); - umac_writel(priv, get_unaligned_be32(&wol->sopass[2]), - UMAC_PSW_LS); - } + if (wol->wolopts & WAKE_MAGICSECURE) + memcpy(priv->sopass, wol->sopass, sizeof(priv->sopass)); /* Flag the device and relevant IRQ as wakeup capable */ if (wol->wolopts) { @@ -2649,13 +2639,18 @@ static int bcm_sysport_suspend_to_wol(struct bcm_sysport_priv *priv) unsigned int index, i = 0; u32 reg; - /* Password has already been programmed */ reg = umac_readl(priv, UMAC_MPD_CTRL); if (priv->wolopts & (WAKE_MAGIC | WAKE_MAGICSECURE)) reg |= MPD_EN; reg &= ~PSW_EN; - if (priv->wolopts & WAKE_MAGICSECURE) + if (priv->wolopts & WAKE_MAGICSECURE) { + /* Program the SecureOn password */ + umac_writel(priv, get_unaligned_be16(&priv->sopass[0]), + UMAC_PSW_MS); + umac_writel(priv, get_unaligned_be32(&priv->sopass[2]), + UMAC_PSW_LS); reg |= PSW_EN; + } umac_writel(priv, reg, UMAC_MPD_CTRL); if (priv->wolopts & WAKE_FILTER) { diff --git a/drivers/net/ethernet/broadcom/bcmsysport.h b/drivers/net/ethernet/broadcom/bcmsysport.h index 0887e6356649..0b192fea9c5d 100644 --- a/drivers/net/ethernet/broadcom/bcmsysport.h +++ b/drivers/net/ethernet/broadcom/bcmsysport.h @@ -12,6 +12,7 @@ #define __BCM_SYSPORT_H #include +#include #include #include @@ -778,6 +779,7 @@ struct bcm_sysport_priv { unsigned int crc_fwd:1; u16 rev; u32 wolopts; + u8 sopass[SOPASS_MAX]; unsigned int wol_irq_disabled:1; /* MIB related fields */ -- cgit v1.2.3 From 546f28974d771b124fb0bf7b551b343888cf0419 Mon Sep 17 00:00:00 2001 From: Toshiaki Makita Date: Thu, 31 Jan 2019 20:40:30 +0900 Subject: virtio_net: Account for tx bytes and packets on sending xdp_frames Previously virtnet_xdp_xmit() did not account for device tx counters, which caused confusions. To be consistent with SKBs, account them on freeing xdp_frames. Reported-by: David Ahern Signed-off-by: Toshiaki Makita Acked-by: Michael S. Tsirkin Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 20 ++++++++++++++++---- 1 file changed, 16 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 259448182272..4cfceb789eea 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -503,6 +503,8 @@ static int virtnet_xdp_xmit(struct net_device *dev, struct bpf_prog *xdp_prog; struct send_queue *sq; unsigned int len; + int packets = 0; + int bytes = 0; int drops = 0; int kicks = 0; int ret, err; @@ -526,10 +528,18 @@ static int virtnet_xdp_xmit(struct net_device *dev, /* Free up any pending old buffers before queueing new ones. */ while ((ptr = virtqueue_get_buf(sq->vq, &len)) != NULL) { - if (likely(is_xdp_frame(ptr))) - xdp_return_frame(ptr_to_xdp(ptr)); - else - napi_consume_skb(ptr, false); + if (likely(is_xdp_frame(ptr))) { + struct xdp_frame *frame = ptr_to_xdp(ptr); + + bytes += frame->len; + xdp_return_frame(frame); + } else { + struct sk_buff *skb = ptr; + + bytes += skb->len; + napi_consume_skb(skb, false); + } + packets++; } for (i = 0; i < n; i++) { @@ -549,6 +559,8 @@ static int virtnet_xdp_xmit(struct net_device *dev, } out: u64_stats_update_begin(&sq->stats.syncp); + sq->stats.bytes += bytes; + sq->stats.packets += packets; sq->stats.xdp_tx += n; sq->stats.xdp_tx_drops += drops; sq->stats.kicks += kicks; -- cgit v1.2.3 From 53bc8d2af08654659abfadfd3e98eb9922ff787c Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Mon, 4 Feb 2019 11:20:29 +0100 Subject: net: dp83640: expire old TX-skb During sendmsg() a cloned skb is saved via dp83640_txtstamp() in ->tx_queue. After the NIC sends this packet, the PHY will reply with a timestamp for that TX packet. If the cable is pulled at the right time I don't see that packet. It might gets flushed as part of queue shutdown on NIC's side. Once the link is up again then after the next sendmsg() we enqueue another skb in dp83640_txtstamp() and have two on the list. Then the PHY will send a reply and decode_txts() attaches it to the first skb on the list. No crash occurs since refcounting works but we are one packet behind. linuxptp/ptp4l usually closes the socket and opens a new one (in such a timeout case) so those "stale" replies never get there. However it does not resume normal operation anymore. Purge old skbs in decode_txts(). Fixes: cb646e2b02b2 ("ptp: Added a clock driver for the National Semiconductor PHYTER.") Signed-off-by: Sebastian Andrzej Siewior Reviewed-by: Kurt Kanzenbach Acked-by: Richard Cochran Signed-off-by: David S. Miller --- drivers/net/phy/dp83640.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c index 18b41bc345ab..6e8807212aa3 100644 --- a/drivers/net/phy/dp83640.c +++ b/drivers/net/phy/dp83640.c @@ -898,14 +898,14 @@ static void decode_txts(struct dp83640_private *dp83640, struct phy_txts *phy_txts) { struct skb_shared_hwtstamps shhwtstamps; + struct dp83640_skb_info *skb_info; struct sk_buff *skb; - u64 ns; u8 overflow; + u64 ns; /* We must already have the skb that triggered this. */ - +again: skb = skb_dequeue(&dp83640->tx_queue); - if (!skb) { pr_debug("have timestamp but tx_queue empty\n"); return; @@ -920,6 +920,11 @@ static void decode_txts(struct dp83640_private *dp83640, } return; } + skb_info = (struct dp83640_skb_info *)skb->cb; + if (time_after(jiffies, skb_info->tmo)) { + kfree_skb(skb); + goto again; + } ns = phy2txts(phy_txts); memset(&shhwtstamps, 0, sizeof(shhwtstamps)); @@ -1472,6 +1477,7 @@ static bool dp83640_rxtstamp(struct phy_device *phydev, static void dp83640_txtstamp(struct phy_device *phydev, struct sk_buff *skb, int type) { + struct dp83640_skb_info *skb_info = (struct dp83640_skb_info *)skb->cb; struct dp83640_private *dp83640 = phydev->priv; switch (dp83640->hwts_tx_en) { @@ -1484,6 +1490,7 @@ static void dp83640_txtstamp(struct phy_device *phydev, /* fall through */ case HWTSTAMP_TX_ON: skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS; + skb_info->tmo = jiffies + SKB_TIMESTAMP_TIMEOUT; skb_queue_tail(&dp83640->tx_queue, skb); break; -- cgit v1.2.3 From 82eaa1fa0448da1852d7b80832e67e80a08dcc27 Mon Sep 17 00:00:00 2001 From: Raed Salem Date: Mon, 17 Dec 2018 11:40:06 +0200 Subject: net/mlx5e: FPGA, fix Innova IPsec TX offload data path performance At Innova IPsec TX offload data path a special software parser metadata is used to pass some packet attributes to the hardware, this metadata is passed using the Ethernet control segment of a WQE (a HW descriptor) header. The cited commit might nullify this header, hence the metadata is lost, this caused a significant performance drop during hw offloading operation. Fix by restoring the metadata at the Ethernet control segment in case it was nullified. Fixes: 37fdffb217a4 ("net/mlx5: WQ, fixes for fragmented WQ buffers API") Signed-off-by: Raed Salem Reviewed-by: Tariq Toukan Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_tx.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c index 598ad7e4d5c9..0e55cd1f2e98 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c @@ -387,8 +387,14 @@ netdev_tx_t mlx5e_sq_xmit(struct mlx5e_txqsq *sq, struct sk_buff *skb, num_wqebbs = DIV_ROUND_UP(ds_cnt, MLX5_SEND_WQEBB_NUM_DS); contig_wqebbs_room = mlx5_wq_cyc_get_contig_wqebbs(wq, pi); if (unlikely(contig_wqebbs_room < num_wqebbs)) { +#ifdef CONFIG_MLX5_EN_IPSEC + struct mlx5_wqe_eth_seg cur_eth = wqe->eth; +#endif mlx5e_fill_sq_frag_edge(sq, wq, pi, contig_wqebbs_room); mlx5e_sq_fetch_wqe(sq, &wqe, &pi); +#ifdef CONFIG_MLX5_EN_IPSEC + wqe->eth = cur_eth; +#endif } /* fill wqe */ -- cgit v1.2.3 From 6363651d6dd79694d586f4ae68967036dd14bc3a Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Thu, 10 Jan 2019 20:37:36 +0200 Subject: net/mlx5e: Properly set steering match levels for offloaded TC decap rules The match level computed by the driver gets to be wrong for decap rules with wildcarded inner packet match such as: tc filter add dev vxlan_sys_4789 protocol all parent ffff: prio 2 flower enc_dst_ip 192.168.0.9 enc_key_id 100 enc_dst_port 4789 action tunnel_key unset action mirred egress redirect dev eth1 The FW errs for a missing matching meta-data indicator for the outer headers (where we do have a match), and a wrong matching meta-data indicator for the inner headers (where we don't have a match). Fix that by taking into account the matching on the tunnel info and relating the match level of the encapsulated packet to the firmware inner headers indicator in case of decap. As for vxlan we mandate a match on the tunnel udp dst port, and in general we practically madndate a match on the source or dest ip for any IP tunnel, the fix was done in a minimal manner around the tunnel match parsing code. Fixes: d708f902989b ('net/mlx5e: Get the required HW match level while parsing TC flow matches') Signed-off-by: Or Gerlitz Reported-by: Slava Ovsiienko Reviewed-by: Jianbo Liu Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c | 4 +++- drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.h | 2 +- drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 18 ++++++++++-------- drivers/net/ethernet/mellanox/mlx5/core/eswitch.h | 1 + .../net/ethernet/mellanox/mlx5/core/eswitch_offloads.c | 17 +++++++++-------- 5 files changed, 24 insertions(+), 18 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c index 046948ead152..a3750af074a4 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c @@ -612,16 +612,18 @@ int mlx5e_tc_tun_parse(struct net_device *filter_dev, struct mlx5_flow_spec *spec, struct tc_cls_flower_offload *f, void *headers_c, - void *headers_v) + void *headers_v, u8 *match_level) { int tunnel_type; int err = 0; tunnel_type = mlx5e_tc_tun_get_type(filter_dev); if (tunnel_type == MLX5E_TC_TUNNEL_TYPE_VXLAN) { + *match_level = MLX5_MATCH_L4; err = mlx5e_tc_tun_parse_vxlan(priv, spec, f, headers_c, headers_v); } else if (tunnel_type == MLX5E_TC_TUNNEL_TYPE_GRETAP) { + *match_level = MLX5_MATCH_L3; err = mlx5e_tc_tun_parse_gretap(priv, spec, f, headers_c, headers_v); } else { diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.h b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.h index 706ce7bf15e7..b63f15de899d 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.h @@ -39,6 +39,6 @@ int mlx5e_tc_tun_parse(struct net_device *filter_dev, struct mlx5_flow_spec *spec, struct tc_cls_flower_offload *f, void *headers_c, - void *headers_v); + void *headers_v, u8 *match_level); #endif //__MLX5_EN_TC_TUNNEL_H__ diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c index cae6c6d48984..043896e13ffa 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c @@ -1302,7 +1302,7 @@ static void mlx5e_tc_del_flow(struct mlx5e_priv *priv, static int parse_tunnel_attr(struct mlx5e_priv *priv, struct mlx5_flow_spec *spec, struct tc_cls_flower_offload *f, - struct net_device *filter_dev) + struct net_device *filter_dev, u8 *match_level) { struct netlink_ext_ack *extack = f->common.extack; void *headers_c = MLX5_ADDR_OF(fte_match_param, spec->match_criteria, @@ -1317,7 +1317,7 @@ static int parse_tunnel_attr(struct mlx5e_priv *priv, int err = 0; err = mlx5e_tc_tun_parse(filter_dev, priv, spec, f, - headers_c, headers_v); + headers_c, headers_v, match_level); if (err) { NL_SET_ERR_MSG_MOD(extack, "failed to parse tunnel attributes"); @@ -1426,7 +1426,7 @@ static int __parse_cls_flower(struct mlx5e_priv *priv, struct mlx5_flow_spec *spec, struct tc_cls_flower_offload *f, struct net_device *filter_dev, - u8 *match_level) + u8 *match_level, u8 *tunnel_match_level) { struct netlink_ext_ack *extack = f->common.extack; void *headers_c = MLX5_ADDR_OF(fte_match_param, spec->match_criteria, @@ -1477,7 +1477,7 @@ static int __parse_cls_flower(struct mlx5e_priv *priv, switch (key->addr_type) { case FLOW_DISSECTOR_KEY_IPV4_ADDRS: case FLOW_DISSECTOR_KEY_IPV6_ADDRS: - if (parse_tunnel_attr(priv, spec, f, filter_dev)) + if (parse_tunnel_attr(priv, spec, f, filter_dev, tunnel_match_level)) return -EOPNOTSUPP; break; default: @@ -1826,11 +1826,11 @@ static int parse_cls_flower(struct mlx5e_priv *priv, struct mlx5_core_dev *dev = priv->mdev; struct mlx5_eswitch *esw = dev->priv.eswitch; struct mlx5e_rep_priv *rpriv = priv->ppriv; + u8 match_level, tunnel_match_level = MLX5_MATCH_NONE; struct mlx5_eswitch_rep *rep; - u8 match_level; int err; - err = __parse_cls_flower(priv, spec, f, filter_dev, &match_level); + err = __parse_cls_flower(priv, spec, f, filter_dev, &match_level, &tunnel_match_level); if (!err && (flow->flags & MLX5E_TC_FLOW_ESWITCH)) { rep = rpriv->rep; @@ -1846,10 +1846,12 @@ static int parse_cls_flower(struct mlx5e_priv *priv, } } - if (flow->flags & MLX5E_TC_FLOW_ESWITCH) + if (flow->flags & MLX5E_TC_FLOW_ESWITCH) { flow->esw_attr->match_level = match_level; - else + flow->esw_attr->tunnel_match_level = tunnel_match_level; + } else { flow->nic_attr->match_level = match_level; + } return err; } diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.h b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.h index 9c89eea9b2c3..748ff178a1d6 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.h @@ -312,6 +312,7 @@ struct mlx5_esw_flow_attr { } dests[MLX5_MAX_FLOW_FWD_VPORTS]; u32 mod_hdr_id; u8 match_level; + u8 tunnel_match_level; struct mlx5_fc *counter; u32 chain; u16 prio; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c index 53065b6ae593..d4e6fe5b9300 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c @@ -160,14 +160,15 @@ mlx5_eswitch_add_offloaded_rule(struct mlx5_eswitch *esw, MLX5_SET_TO_ONES(fte_match_set_misc, misc, source_eswitch_owner_vhca_id); - if (attr->match_level == MLX5_MATCH_NONE) - spec->match_criteria_enable = MLX5_MATCH_MISC_PARAMETERS; - else - spec->match_criteria_enable = MLX5_MATCH_OUTER_HEADERS | - MLX5_MATCH_MISC_PARAMETERS; - - if (flow_act.action & MLX5_FLOW_CONTEXT_ACTION_DECAP) - spec->match_criteria_enable |= MLX5_MATCH_INNER_HEADERS; + spec->match_criteria_enable = MLX5_MATCH_MISC_PARAMETERS; + if (flow_act.action & MLX5_FLOW_CONTEXT_ACTION_DECAP) { + if (attr->tunnel_match_level != MLX5_MATCH_NONE) + spec->match_criteria_enable |= MLX5_MATCH_OUTER_HEADERS; + if (attr->match_level != MLX5_MATCH_NONE) + spec->match_criteria_enable |= MLX5_MATCH_INNER_HEADERS; + } else if (attr->match_level != MLX5_MATCH_NONE) { + spec->match_criteria_enable |= MLX5_MATCH_OUTER_HEADERS; + } if (flow_act.action & MLX5_FLOW_CONTEXT_ACTION_MOD_HDR) flow_act.modify_id = attr->mod_hdr_id; -- cgit v1.2.3 From 1651925d403e077e3fc86f961905e27c6810e132 Mon Sep 17 00:00:00 2001 From: Guy Shattah Date: Mon, 28 Jan 2019 13:58:07 +0000 Subject: net/mlx5e: Use the inner headers to determine tc/pedit offload limitation on decap flows In packets that need to be decaped the internal headers have to be checked, not the external ones. Fixes: bdd66ac0aeed ("net/mlx5e: Disallow TC offloading of unsupported match/action combinations") Signed-off-by: Guy Shattah Reviewed-by: Or Gerlitz Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c index 043896e13ffa..1c3c9fa26b55 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c @@ -2181,6 +2181,7 @@ static bool csum_offload_supported(struct mlx5e_priv *priv, static bool modify_header_match_supported(struct mlx5_flow_spec *spec, struct tcf_exts *exts, + u32 actions, struct netlink_ext_ack *extack) { const struct tc_action *a; @@ -2190,7 +2191,11 @@ static bool modify_header_match_supported(struct mlx5_flow_spec *spec, u16 ethertype; int nkeys, i; - headers_v = MLX5_ADDR_OF(fte_match_param, spec->match_value, outer_headers); + if (actions & MLX5_FLOW_CONTEXT_ACTION_DECAP) + headers_v = MLX5_ADDR_OF(fte_match_param, spec->match_value, inner_headers); + else + headers_v = MLX5_ADDR_OF(fte_match_param, spec->match_value, outer_headers); + ethertype = MLX5_GET(fte_match_set_lyr_2_4, headers_v, ethertype); /* for non-IP we only re-write MACs, so we're okay */ @@ -2247,7 +2252,7 @@ static bool actions_match_supported(struct mlx5e_priv *priv, if (actions & MLX5_FLOW_CONTEXT_ACTION_MOD_HDR) return modify_header_match_supported(&parse_attr->spec, exts, - extack); + actions, extack); return true; } -- cgit v1.2.3 From 75c05a74e745ae7d663b04d75777af80ada2233c Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Wed, 6 Feb 2019 00:02:58 +0100 Subject: net: dsa: mv88e6xxx: Fix counting of ATU violations The ATU port vector contains a bit per port of the switch. The code wrongly used it as a port number, and incremented a port counter. This resulted in the wrong interfaces counter being incremented, and potentially going off the end of the array of ports. Fix this by using the source port ID for the violation, which really is a port number. Reported-by: Chris Healy Tested-by: Chris Healy Fixes: 65f60e4582bd ("net: dsa: mv88e6xxx: Keep ATU/VTU violation statistics") Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/dsa/mv88e6xxx/global1_atu.c | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/dsa/mv88e6xxx/global1_atu.c b/drivers/net/dsa/mv88e6xxx/global1_atu.c index 5200e4bdce93..ea243840ee0f 100644 --- a/drivers/net/dsa/mv88e6xxx/global1_atu.c +++ b/drivers/net/dsa/mv88e6xxx/global1_atu.c @@ -314,6 +314,7 @@ static irqreturn_t mv88e6xxx_g1_atu_prob_irq_thread_fn(int irq, void *dev_id) { struct mv88e6xxx_chip *chip = dev_id; struct mv88e6xxx_atu_entry entry; + int spid; int err; u16 val; @@ -336,6 +337,8 @@ static irqreturn_t mv88e6xxx_g1_atu_prob_irq_thread_fn(int irq, void *dev_id) if (err) goto out; + spid = entry.state; + if (val & MV88E6XXX_G1_ATU_OP_AGE_OUT_VIOLATION) { dev_err_ratelimited(chip->dev, "ATU age out violation for %pM\n", @@ -344,23 +347,23 @@ static irqreturn_t mv88e6xxx_g1_atu_prob_irq_thread_fn(int irq, void *dev_id) if (val & MV88E6XXX_G1_ATU_OP_MEMBER_VIOLATION) { dev_err_ratelimited(chip->dev, - "ATU member violation for %pM portvec %x\n", - entry.mac, entry.portvec); - chip->ports[entry.portvec].atu_member_violation++; + "ATU member violation for %pM portvec %x spid %d\n", + entry.mac, entry.portvec, spid); + chip->ports[spid].atu_member_violation++; } if (val & MV88E6XXX_G1_ATU_OP_MISS_VIOLATION) { dev_err_ratelimited(chip->dev, - "ATU miss violation for %pM portvec %x\n", - entry.mac, entry.portvec); - chip->ports[entry.portvec].atu_miss_violation++; + "ATU miss violation for %pM portvec %x spid %d\n", + entry.mac, entry.portvec, spid); + chip->ports[spid].atu_miss_violation++; } if (val & MV88E6XXX_G1_ATU_OP_FULL_VIOLATION) { dev_err_ratelimited(chip->dev, - "ATU full violation for %pM portvec %x\n", - entry.mac, entry.portvec); - chip->ports[entry.portvec].atu_full_violation++; + "ATU full violation for %pM portvec %x spid %d\n", + entry.mac, entry.portvec, spid); + chip->ports[spid].atu_full_violation++; } mutex_unlock(&chip->reg_lock); -- cgit v1.2.3 From 660492bcf4a7561b5fdc13be0ae0b0c0a8c120be Mon Sep 17 00:00:00 2001 From: Manish Chopra Date: Wed, 6 Feb 2019 14:43:42 -0800 Subject: qed: Fix EQ full firmware assert. When slowpath messages are sent with high rate, the resulting events can lead to a FW assert in case they are not handled fast enough (Event Queue Full assert). Attempt to send queued slowpath messages only after the newly evacuated entries in the EQ ring are indicated to FW. Signed-off-by: Manish Chopra Signed-off-by: Ariel Elior Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_sp.h | 1 + drivers/net/ethernet/qlogic/qed/qed_spq.c | 15 +++++++-------- 2 files changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/qlogic/qed/qed_sp.h b/drivers/net/ethernet/qlogic/qed/qed_sp.h index 4179c9013fc6..96ab77ae6af5 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_sp.h +++ b/drivers/net/ethernet/qlogic/qed/qed_sp.h @@ -382,6 +382,7 @@ void qed_consq_setup(struct qed_hwfn *p_hwfn); * @param p_hwfn */ void qed_consq_free(struct qed_hwfn *p_hwfn); +int qed_spq_pend_post(struct qed_hwfn *p_hwfn); /** * @file diff --git a/drivers/net/ethernet/qlogic/qed/qed_spq.c b/drivers/net/ethernet/qlogic/qed/qed_spq.c index eb88bbc6b193..ba64ff9bedbd 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_spq.c +++ b/drivers/net/ethernet/qlogic/qed/qed_spq.c @@ -397,6 +397,11 @@ int qed_eq_completion(struct qed_hwfn *p_hwfn, void *cookie) qed_eq_prod_update(p_hwfn, qed_chain_get_prod_idx(p_chain)); + /* Attempt to post pending requests */ + spin_lock_bh(&p_hwfn->p_spq->lock); + rc = qed_spq_pend_post(p_hwfn); + spin_unlock_bh(&p_hwfn->p_spq->lock); + return rc; } @@ -767,7 +772,7 @@ static int qed_spq_post_list(struct qed_hwfn *p_hwfn, return 0; } -static int qed_spq_pend_post(struct qed_hwfn *p_hwfn) +int qed_spq_pend_post(struct qed_hwfn *p_hwfn) { struct qed_spq *p_spq = p_hwfn->p_spq; struct qed_spq_entry *p_ent = NULL; @@ -905,7 +910,6 @@ int qed_spq_completion(struct qed_hwfn *p_hwfn, struct qed_spq_entry *p_ent = NULL; struct qed_spq_entry *tmp; struct qed_spq_entry *found = NULL; - int rc; if (!p_hwfn) return -EINVAL; @@ -963,12 +967,7 @@ int qed_spq_completion(struct qed_hwfn *p_hwfn, */ qed_spq_return_entry(p_hwfn, found); - /* Attempt to post pending requests */ - spin_lock_bh(&p_spq->lock); - rc = qed_spq_pend_post(p_hwfn); - spin_unlock_bh(&p_spq->lock); - - return rc; + return 0; } int qed_consq_alloc(struct qed_hwfn *p_hwfn) -- cgit v1.2.3 From ebd873a31cae778c2379959ab382b34ba3b73549 Mon Sep 17 00:00:00 2001 From: Sudarsana Reddy Kalluru Date: Wed, 6 Feb 2019 14:43:43 -0800 Subject: qed: Assign UFP TC value to vlan priority in UFP mode. In the case of Unified Fabric Port (UFP) mode, switch provides the traffic class (TC) value to be used for the traffic. Configure hardware to use this TC value for vlan priority. Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Ariel Elior Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_sp_commands.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/qlogic/qed/qed_sp_commands.c b/drivers/net/ethernet/qlogic/qed/qed_sp_commands.c index 888274fa208b..5a495fda9e9d 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_sp_commands.c +++ b/drivers/net/ethernet/qlogic/qed/qed_sp_commands.c @@ -604,6 +604,9 @@ int qed_sp_pf_update_stag(struct qed_hwfn *p_hwfn) p_ent->ramrod.pf_update.update_mf_vlan_flag = true; p_ent->ramrod.pf_update.mf_vlan = cpu_to_le16(p_hwfn->hw_info.ovlan); + if (test_bit(QED_MF_UFP_SPECIFIC, &p_hwfn->cdev->mf_bits)) + p_ent->ramrod.pf_update.mf_vlan |= + cpu_to_le16(((u16)p_hwfn->ufp_info.tc << 13)); return qed_spq_post(p_hwfn, p_ent, NULL); } -- cgit v1.2.3 From fb1faab74ddef9ec2d841d54e5d0912a097b3abe Mon Sep 17 00:00:00 2001 From: Sudarsana Reddy Kalluru Date: Wed, 6 Feb 2019 14:43:44 -0800 Subject: qed: Consider TX tcs while deriving the max num_queues for PF. Max supported queues is derived incorrectly in the case of multi-CoS. Need to consider TCs while calculating num_queues for PF. Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Ariel Elior Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_l2.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/qlogic/qed/qed_l2.c b/drivers/net/ethernet/qlogic/qed/qed_l2.c index e68ca83ae915..64ac95ca4df2 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_l2.c +++ b/drivers/net/ethernet/qlogic/qed/qed_l2.c @@ -2216,7 +2216,7 @@ static int qed_fill_eth_dev_info(struct qed_dev *cdev, u16 num_queues = 0; /* Since the feature controls only queue-zones, - * make sure we have the contexts [rx, tx, xdp] to + * make sure we have the contexts [rx, xdp, tcs] to * match. */ for_each_hwfn(cdev, i) { @@ -2226,7 +2226,8 @@ static int qed_fill_eth_dev_info(struct qed_dev *cdev, u16 cids; cids = hwfn->pf_params.eth_pf_params.num_cons; - num_queues += min_t(u16, l2_queues, cids / 3); + cids /= (2 + info->num_tc); + num_queues += min_t(u16, l2_queues, cids); } /* queues might theoretically be >256, but interrupts' -- cgit v1.2.3 From 0aa4febb420d91df5b56b1864a2465765da85f4b Mon Sep 17 00:00:00 2001 From: Sudarsana Reddy Kalluru Date: Wed, 6 Feb 2019 14:43:45 -0800 Subject: qede: Fix system crash on configuring channels. Under heavy traffic load, when changing number of channels via ethtool (ethtool -L) which will cause interface to be reloaded, it was observed that some packets gets transmitted on old TX channel/queue id which doesn't really exist after the channel configuration leads to system crash. Add a safeguard in the driver by validating queue id through ndo_select_queue() which is called before the ndo_start_xmit(). Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Ariel Elior Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qede/qede.h | 3 +++ drivers/net/ethernet/qlogic/qede/qede_fp.c | 13 +++++++++++++ drivers/net/ethernet/qlogic/qede/qede_main.c | 3 +++ 3 files changed, 19 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/qlogic/qede/qede.h b/drivers/net/ethernet/qlogic/qede/qede.h index 613249d1e967..cd404269de53 100644 --- a/drivers/net/ethernet/qlogic/qede/qede.h +++ b/drivers/net/ethernet/qlogic/qede/qede.h @@ -494,6 +494,9 @@ struct qede_reload_args { /* Datapath functions definition */ netdev_tx_t qede_start_xmit(struct sk_buff *skb, struct net_device *ndev); +u16 qede_select_queue(struct net_device *dev, struct sk_buff *skb, + struct net_device *sb_dev, + select_queue_fallback_t fallback); netdev_features_t qede_features_check(struct sk_buff *skb, struct net_device *dev, netdev_features_t features); diff --git a/drivers/net/ethernet/qlogic/qede/qede_fp.c b/drivers/net/ethernet/qlogic/qede/qede_fp.c index bdf816fe5a16..31b046e24565 100644 --- a/drivers/net/ethernet/qlogic/qede/qede_fp.c +++ b/drivers/net/ethernet/qlogic/qede/qede_fp.c @@ -1695,6 +1695,19 @@ netdev_tx_t qede_start_xmit(struct sk_buff *skb, struct net_device *ndev) return NETDEV_TX_OK; } +u16 qede_select_queue(struct net_device *dev, struct sk_buff *skb, + struct net_device *sb_dev, + select_queue_fallback_t fallback) +{ + struct qede_dev *edev = netdev_priv(dev); + int total_txq; + + total_txq = QEDE_TSS_COUNT(edev) * edev->dev_info.num_tc; + + return QEDE_TSS_COUNT(edev) ? + fallback(dev, skb, NULL) % total_txq : 0; +} + /* 8B udp header + 8B base tunnel header + 32B option length */ #define QEDE_MAX_TUN_HDR_LEN 48 diff --git a/drivers/net/ethernet/qlogic/qede/qede_main.c b/drivers/net/ethernet/qlogic/qede/qede_main.c index 5a74fcbdbc2b..9790f26d17c4 100644 --- a/drivers/net/ethernet/qlogic/qede/qede_main.c +++ b/drivers/net/ethernet/qlogic/qede/qede_main.c @@ -631,6 +631,7 @@ static const struct net_device_ops qede_netdev_ops = { .ndo_open = qede_open, .ndo_stop = qede_close, .ndo_start_xmit = qede_start_xmit, + .ndo_select_queue = qede_select_queue, .ndo_set_rx_mode = qede_set_rx_mode, .ndo_set_mac_address = qede_set_mac_addr, .ndo_validate_addr = eth_validate_addr, @@ -666,6 +667,7 @@ static const struct net_device_ops qede_netdev_vf_ops = { .ndo_open = qede_open, .ndo_stop = qede_close, .ndo_start_xmit = qede_start_xmit, + .ndo_select_queue = qede_select_queue, .ndo_set_rx_mode = qede_set_rx_mode, .ndo_set_mac_address = qede_set_mac_addr, .ndo_validate_addr = eth_validate_addr, @@ -684,6 +686,7 @@ static const struct net_device_ops qede_netdev_vf_xdp_ops = { .ndo_open = qede_open, .ndo_stop = qede_close, .ndo_start_xmit = qede_start_xmit, + .ndo_select_queue = qede_select_queue, .ndo_set_rx_mode = qede_set_rx_mode, .ndo_set_mac_address = qede_set_mac_addr, .ndo_validate_addr = eth_validate_addr, -- cgit v1.2.3 From 8c8502532f0064d0f04335bfe0f80d9431866a73 Mon Sep 17 00:00:00 2001 From: Rahul Verma Date: Wed, 6 Feb 2019 14:43:46 -0800 Subject: qed: Change verbosity for coalescing message. Fix unnecessary logging of message in an expected default case where coalescing value read (via ethtool -c) migh not be valid unless they are configured explicitly in the hardware using ethtool -C. Signed-off-by: Rahul Verma Signed-off-by: Manish Chopra Signed-off-by: Ariel Elior Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_l2.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/qlogic/qed/qed_l2.c b/drivers/net/ethernet/qlogic/qed/qed_l2.c index 64ac95ca4df2..58be1c4c6668 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_l2.c +++ b/drivers/net/ethernet/qlogic/qed/qed_l2.c @@ -2871,7 +2871,8 @@ static int qed_get_coalesce(struct qed_dev *cdev, u16 *coal, void *handle) p_hwfn = p_cid->p_owner; rc = qed_get_queue_coalesce(p_hwfn, coal, handle); if (rc) - DP_NOTICE(p_hwfn, "Unable to read queue coalescing\n"); + DP_VERBOSE(cdev, QED_MSG_DEBUG, + "Unable to read queue coalescing\n"); return rc; } -- cgit v1.2.3 From 42dbcd6b25cd6fe8b47cf838f5da8178d1cd926c Mon Sep 17 00:00:00 2001 From: Manish Chopra Date: Wed, 6 Feb 2019 14:43:47 -0800 Subject: qed*: Advance drivers version to 8.37.0.20 Version update for qed/qede modules. Signed-off-by: Manish Chopra Signed-off-by: Ariel Elior Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed.h | 2 +- drivers/net/ethernet/qlogic/qede/qede.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/qlogic/qed/qed.h b/drivers/net/ethernet/qlogic/qed/qed.h index 24a90163775e..2d8a77cc156b 100644 --- a/drivers/net/ethernet/qlogic/qed/qed.h +++ b/drivers/net/ethernet/qlogic/qed/qed.h @@ -53,7 +53,7 @@ extern const struct qed_common_ops qed_common_ops_pass; #define QED_MAJOR_VERSION 8 -#define QED_MINOR_VERSION 33 +#define QED_MINOR_VERSION 37 #define QED_REVISION_VERSION 0 #define QED_ENGINEERING_VERSION 20 diff --git a/drivers/net/ethernet/qlogic/qede/qede.h b/drivers/net/ethernet/qlogic/qede/qede.h index cd404269de53..730997b13747 100644 --- a/drivers/net/ethernet/qlogic/qede/qede.h +++ b/drivers/net/ethernet/qlogic/qede/qede.h @@ -56,7 +56,7 @@ #include #define QEDE_MAJOR_VERSION 8 -#define QEDE_MINOR_VERSION 33 +#define QEDE_MINOR_VERSION 37 #define QEDE_REVISION_VERSION 0 #define QEDE_ENGINEERING_VERSION 20 #define DRV_MODULE_VERSION __stringify(QEDE_MAJOR_VERSION) "." \ -- cgit v1.2.3 From 6707f74be8621ae067d2cf1c4485900e2742c20f Mon Sep 17 00:00:00 2001 From: Tonghao Zhang Date: Mon, 28 Jan 2019 15:28:05 -0800 Subject: net/mlx5e: Update hw flows when encap source mac changed When we offload tc filters to hardware, hardware flows can be updated when mac of encap destination ip is changed. But we ignore one case, that the mac of local encap ip can be changed too, so we should also update them. To fix it, add route_dev in mlx5e_encap_entry struct to save the local encap netdevice, and when mac changed, kernel will flush all the neighbour on the netdevice and send NETEVENT_NEIGH_UPDATE event. The mlx5 driver will delete the flows and add them when neighbour available again. Fixes: 232c001398ae ("net/mlx5e: Add support to neighbour update flow") Cc: Hadar Hen Zion Signed-off-by: Tonghao Zhang Reviewed-by: Or Gerlitz Acked-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c | 2 ++ drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 4 ++++ drivers/net/ethernet/mellanox/mlx5/core/en_rep.h | 1 + 3 files changed, 7 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c index a3750af074a4..f3c7ab6faea5 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c @@ -256,6 +256,7 @@ int mlx5e_tc_tun_create_header_ipv4(struct mlx5e_priv *priv, e->m_neigh.family = n->ops->family; memcpy(&e->m_neigh.dst_ip, n->primary_key, n->tbl->key_len); e->out_dev = out_dev; + e->route_dev = route_dev; /* It's important to add the neigh to the hash table before checking * the neigh validity state. So if we'll get a notification, in case the @@ -369,6 +370,7 @@ int mlx5e_tc_tun_create_header_ipv6(struct mlx5e_priv *priv, e->m_neigh.family = n->ops->family; memcpy(&e->m_neigh.dst_ip, n->primary_key, n->tbl->key_len); e->out_dev = out_dev; + e->route_dev = route_dev; /* It's importent to add the neigh to the hash table before checking * the neigh validity state. So if we'll get a notification, in case the diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c index f2573c2d2b5c..ef9e472daffb 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c @@ -596,6 +596,10 @@ static void mlx5e_rep_update_flows(struct mlx5e_priv *priv, if (neigh_connected && !(e->flags & MLX5_ENCAP_ENTRY_VALID)) { ether_addr_copy(e->h_dest, ha); ether_addr_copy(eth->h_dest, ha); + /* Update the encap source mac, in case that we delete + * the flows when encap source mac changed. + */ + ether_addr_copy(eth->h_source, e->route_dev->dev_addr); mlx5e_tc_encap_flows_add(priv, e); } diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.h b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.h index edd722824697..36eafc877e6b 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.h @@ -148,6 +148,7 @@ struct mlx5e_encap_entry { unsigned char h_dest[ETH_ALEN]; /* destination eth addr */ struct net_device *out_dev; + struct net_device *route_dev; int tunnel_type; int tunnel_hlen; int reformat_type; -- cgit v1.2.3 From 218d05ce326f9e1b40a56085431fa1068b43d5d9 Mon Sep 17 00:00:00 2001 From: Tonghao Zhang Date: Mon, 28 Jan 2019 15:28:06 -0800 Subject: net/mlx5e: Don't overwrite pedit action when multiple pedit used In some case, we may use multiple pedit actions to modify packets. The command shown as below: the last pedit action is effective. $ tc filter add dev netdev_rep parent ffff: protocol ip prio 1 \ flower skip_sw ip_proto icmp dst_ip 3.3.3.3 \ action pedit ex munge ip dst set 192.168.1.100 pipe \ action pedit ex munge eth src set 00:00:00:00:00:01 pipe \ action pedit ex munge eth dst set 00:00:00:00:00:02 pipe \ action csum ip pipe \ action tunnel_key set src_ip 1.1.1.100 dst_ip 1.1.1.200 dst_port 4789 id 100 \ action mirred egress redirect dev vxlan0 To fix it, we add max_mod_hdr_actions to mlx5e_tc_flow_parse_attr struction, max_mod_hdr_actions will store the max pedit action number we support and num_mod_hdr_actions indicates how many pedit action we used, and store all pedit action to mod_hdr_actions. Fixes: d79b6df6b10a ("net/mlx5e: Add parsing of TC pedit actions to HW format") Cc: Or Gerlitz Signed-off-by: Tonghao Zhang Reviewed-by: Or Gerlitz Acked-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 25 +++++++++++++++---------- 1 file changed, 15 insertions(+), 10 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c index 1c3c9fa26b55..b5c1b039375a 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c @@ -128,6 +128,7 @@ struct mlx5e_tc_flow_parse_attr { struct net_device *filter_dev; struct mlx5_flow_spec spec; int num_mod_hdr_actions; + int max_mod_hdr_actions; void *mod_hdr_actions; int mirred_ifindex[MLX5_MAX_FLOW_FWD_VPORTS]; }; @@ -1936,9 +1937,9 @@ static struct mlx5_fields fields[] = { OFFLOAD(UDP_DPORT, 2, udp.dest, 0), }; -/* On input attr->num_mod_hdr_actions tells how many HW actions can be parsed at - * max from the SW pedit action. On success, it says how many HW actions were - * actually parsed. +/* On input attr->max_mod_hdr_actions tells how many HW actions can be parsed at + * max from the SW pedit action. On success, attr->num_mod_hdr_actions + * says how many HW actions were actually parsed. */ static int offload_pedit_fields(struct pedit_headers *masks, struct pedit_headers *vals, @@ -1962,9 +1963,11 @@ static int offload_pedit_fields(struct pedit_headers *masks, add_vals = &vals[TCA_PEDIT_KEY_EX_CMD_ADD]; action_size = MLX5_UN_SZ_BYTES(set_action_in_add_action_in_auto); - action = parse_attr->mod_hdr_actions; - max_actions = parse_attr->num_mod_hdr_actions; - nactions = 0; + action = parse_attr->mod_hdr_actions + + parse_attr->num_mod_hdr_actions * action_size; + + max_actions = parse_attr->max_mod_hdr_actions; + nactions = parse_attr->num_mod_hdr_actions; for (i = 0; i < ARRAY_SIZE(fields); i++) { f = &fields[i]; @@ -2075,7 +2078,7 @@ static int alloc_mod_hdr_actions(struct mlx5e_priv *priv, if (!parse_attr->mod_hdr_actions) return -ENOMEM; - parse_attr->num_mod_hdr_actions = max_actions; + parse_attr->max_mod_hdr_actions = max_actions; return 0; } @@ -2121,9 +2124,11 @@ static int parse_tc_pedit_action(struct mlx5e_priv *priv, goto out_err; } - err = alloc_mod_hdr_actions(priv, a, namespace, parse_attr); - if (err) - goto out_err; + if (!parse_attr->mod_hdr_actions) { + err = alloc_mod_hdr_actions(priv, a, namespace, parse_attr); + if (err) + goto out_err; + } err = offload_pedit_fields(masks, vals, parse_attr, extack); if (err < 0) -- cgit v1.2.3 From 3703a395012b509cb2fea50958cdbe4a6a895eed Mon Sep 17 00:00:00 2001 From: Yang Wei Date: Wed, 6 Feb 2019 00:01:04 +0800 Subject: net: defxx: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles dev_consume_skb_irq() should be called in dfx_xmt_done() when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by: Yang Wei Reviewed-by: Maciej W. Rozycki Signed-off-by: David S. Miller --- drivers/net/fddi/defxx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/fddi/defxx.c b/drivers/net/fddi/defxx.c index 38ac8ef41f5f..56b7791911bf 100644 --- a/drivers/net/fddi/defxx.c +++ b/drivers/net/fddi/defxx.c @@ -3512,7 +3512,7 @@ static int dfx_xmt_done(DFX_board_t *bp) bp->descr_block_virt->xmt_data[comp].long_1, p_xmt_drv_descr->p_skb->len, DMA_TO_DEVICE); - dev_kfree_skb_irq(p_xmt_drv_descr->p_skb); + dev_consume_skb_irq(p_xmt_drv_descr->p_skb); /* * Move to start of next packet by updating completion index -- cgit v1.2.3 From 62d1a31cfb5d9291f4dd90c1b0ef5c22f3c235bf Mon Sep 17 00:00:00 2001 From: Yang Wei Date: Wed, 6 Feb 2019 00:03:51 +0800 Subject: net: tulip: de2104x: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles dev_consume_skb_irq() should be called in de_tx() when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by: Yang Wei Signed-off-by: David S. Miller --- drivers/net/ethernet/dec/tulip/de2104x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/dec/tulip/de2104x.c b/drivers/net/ethernet/dec/tulip/de2104x.c index 13430f75496c..f1a2da15dd0a 100644 --- a/drivers/net/ethernet/dec/tulip/de2104x.c +++ b/drivers/net/ethernet/dec/tulip/de2104x.c @@ -585,7 +585,7 @@ static void de_tx (struct de_private *de) netif_dbg(de, tx_done, de->dev, "tx done, slot %d\n", tx_tail); } - dev_kfree_skb_irq(skb); + dev_consume_skb_irq(skb); } next: -- cgit v1.2.3 From 96d26503e1deba5d12e0e4b473336479cc0965af Mon Sep 17 00:00:00 2001 From: Yang Wei Date: Wed, 6 Feb 2019 00:07:03 +0800 Subject: net: dscc4: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles dev_consume_skb_irq() should be called in dscc4_tx_irq() when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by: Yang Wei Signed-off-by: David S. Miller --- drivers/net/wan/dscc4.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wan/dscc4.c b/drivers/net/wan/dscc4.c index c0b0f525c87c..27decf8ae840 100644 --- a/drivers/net/wan/dscc4.c +++ b/drivers/net/wan/dscc4.c @@ -1575,7 +1575,7 @@ try: dev->stats.tx_packets++; dev->stats.tx_bytes += skb->len; } - dev_kfree_skb_irq(skb); + dev_consume_skb_irq(skb); dpriv->tx_skbuff[cur] = NULL; ++dpriv->tx_dirty; } else { -- cgit v1.2.3 From bb6a702c6d512b16a7c16a38468a14eda72f44b5 Mon Sep 17 00:00:00 2001 From: Yang Wei Date: Wed, 6 Feb 2019 00:09:41 +0800 Subject: net: smsc: epic100: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles dev_consume_skb_irq() should be called in epic_tx() when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by: Yang Wei Signed-off-by: David S. Miller --- drivers/net/ethernet/smsc/epic100.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/smsc/epic100.c b/drivers/net/ethernet/smsc/epic100.c index 15c62c160953..be47d864f8b9 100644 --- a/drivers/net/ethernet/smsc/epic100.c +++ b/drivers/net/ethernet/smsc/epic100.c @@ -1037,7 +1037,7 @@ static void epic_tx(struct net_device *dev, struct epic_private *ep) skb = ep->tx_skbuff[entry]; pci_unmap_single(ep->pci_dev, ep->tx_ring[entry].bufaddr, skb->len, PCI_DMA_TODEVICE); - dev_kfree_skb_irq(skb); + dev_consume_skb_irq(skb); ep->tx_skbuff[entry] = NULL; } -- cgit v1.2.3 From c50e964b76903b03a1516a04463c2faf945ec140 Mon Sep 17 00:00:00 2001 From: Yang Wei Date: Wed, 6 Feb 2019 00:12:04 +0800 Subject: net: fec_mpc52xx: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles dev_consume_skb_irq() should be called in mpc52xx_fec_tx_interrupt() when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by: Yang Wei Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/fec_mpc52xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/freescale/fec_mpc52xx.c b/drivers/net/ethernet/freescale/fec_mpc52xx.c index b90bab72efdb..c1968b3ecec8 100644 --- a/drivers/net/ethernet/freescale/fec_mpc52xx.c +++ b/drivers/net/ethernet/freescale/fec_mpc52xx.c @@ -369,7 +369,7 @@ static irqreturn_t mpc52xx_fec_tx_interrupt(int irq, void *dev_id) dma_unmap_single(dev->dev.parent, bd->skb_pa, skb->len, DMA_TO_DEVICE); - dev_kfree_skb_irq(skb); + dev_consume_skb_irq(skb); } spin_unlock(&priv->lock); -- cgit v1.2.3 From 7c3850adbcccc2c6c9e7ab23a7dcbc4926ee5b96 Mon Sep 17 00:00:00 2001 From: Yang Wei Date: Wed, 6 Feb 2019 00:14:51 +0800 Subject: net: fsl_ucc_hdlc: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles dev_consume_skb_irq() should be called in hdlc_tx_done() when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by: Yang Wei Signed-off-by: David S. Miller --- drivers/net/wan/fsl_ucc_hdlc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wan/fsl_ucc_hdlc.c b/drivers/net/wan/fsl_ucc_hdlc.c index 66d889d54e58..a08f04c3f644 100644 --- a/drivers/net/wan/fsl_ucc_hdlc.c +++ b/drivers/net/wan/fsl_ucc_hdlc.c @@ -482,7 +482,7 @@ static int hdlc_tx_done(struct ucc_hdlc_private *priv) memset(priv->tx_buffer + (be32_to_cpu(bd->buf) - priv->dma_tx_addr), 0, skb->len); - dev_kfree_skb_irq(skb); + dev_consume_skb_irq(skb); priv->tx_skbuff[priv->skb_dirtytx] = NULL; priv->skb_dirtytx = -- cgit v1.2.3 From 98fcd70b642dd843f80c92eeb6f8c07886876999 Mon Sep 17 00:00:00 2001 From: Yang Wei Date: Wed, 6 Feb 2019 00:19:44 +0800 Subject: net: sun: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles dev_consume_skb_irq() should be called when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by: Yang Wei Signed-off-by: David S. Miller --- drivers/net/ethernet/sun/cassini.c | 2 +- drivers/net/ethernet/sun/sunbmac.c | 2 +- drivers/net/ethernet/sun/sunhme.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/sun/cassini.c b/drivers/net/ethernet/sun/cassini.c index 7ec4eb74fe21..6fc05c106afc 100644 --- a/drivers/net/ethernet/sun/cassini.c +++ b/drivers/net/ethernet/sun/cassini.c @@ -1898,7 +1898,7 @@ static inline void cas_tx_ringN(struct cas *cp, int ring, int limit) cp->net_stats[ring].tx_packets++; cp->net_stats[ring].tx_bytes += skb->len; spin_unlock(&cp->stat_lock[ring]); - dev_kfree_skb_irq(skb); + dev_consume_skb_irq(skb); } cp->tx_old[ring] = entry; diff --git a/drivers/net/ethernet/sun/sunbmac.c b/drivers/net/ethernet/sun/sunbmac.c index 720b7ac77f3b..e9b757b03b56 100644 --- a/drivers/net/ethernet/sun/sunbmac.c +++ b/drivers/net/ethernet/sun/sunbmac.c @@ -781,7 +781,7 @@ static void bigmac_tx(struct bigmac *bp) DTX(("skb(%p) ", skb)); bp->tx_skbs[elem] = NULL; - dev_kfree_skb_irq(skb); + dev_consume_skb_irq(skb); elem = NEXT_TX(elem); } diff --git a/drivers/net/ethernet/sun/sunhme.c b/drivers/net/ethernet/sun/sunhme.c index ff641cf30a4e..d007dfeba5c3 100644 --- a/drivers/net/ethernet/sun/sunhme.c +++ b/drivers/net/ethernet/sun/sunhme.c @@ -1962,7 +1962,7 @@ static void happy_meal_tx(struct happy_meal *hp) this = &txbase[elem]; } - dev_kfree_skb_irq(skb); + dev_consume_skb_irq(skb); dev->stats.tx_packets++; } hp->tx_old = elem; -- cgit v1.2.3 From f4ad1a6154e305dbcde20395a6961658d1ce032b Mon Sep 17 00:00:00 2001 From: Yang Wei Date: Wed, 6 Feb 2019 00:21:31 +0800 Subject: net: tehuti: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles dev_consume_skb_irq() should be called in bdx_tx_cleanup() when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by: Yang Wei Signed-off-by: David S. Miller --- drivers/net/ethernet/tehuti/tehuti.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/tehuti/tehuti.c b/drivers/net/ethernet/tehuti/tehuti.c index dc966ddb6d81..b24c11187017 100644 --- a/drivers/net/ethernet/tehuti/tehuti.c +++ b/drivers/net/ethernet/tehuti/tehuti.c @@ -1739,7 +1739,7 @@ static void bdx_tx_cleanup(struct bdx_priv *priv) tx_level -= db->rptr->len; /* '-' koz len is negative */ /* now should come skb pointer - free it */ - dev_kfree_skb_irq(db->rptr->addr.skb); + dev_consume_skb_irq(db->rptr->addr.skb); bdx_tx_db_inc_rptr(db); } -- cgit v1.2.3 From e0cbbc613175e1c67bd82721230692047923d845 Mon Sep 17 00:00:00 2001 From: Yang Wei Date: Wed, 6 Feb 2019 00:22:54 +0800 Subject: net: via-velocity: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles dev_consume_skb_irq() should be called in velocity_free_tx_buf() when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by: Yang Wei Signed-off-by: David S. Miller --- drivers/net/ethernet/via/via-velocity.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/via/via-velocity.c b/drivers/net/ethernet/via/via-velocity.c index 82412691ee66..27f6cf140845 100644 --- a/drivers/net/ethernet/via/via-velocity.c +++ b/drivers/net/ethernet/via/via-velocity.c @@ -1740,7 +1740,7 @@ static void velocity_free_tx_buf(struct velocity_info *vptr, dma_unmap_single(vptr->dev, tdinfo->skb_dma[i], le16_to_cpu(pktlen), DMA_TO_DEVICE); } - dev_kfree_skb_irq(skb); + dev_consume_skb_irq(skb); tdinfo->skb = NULL; } -- cgit v1.2.3 From d2901b0739a42a5669ae33356206591a6bd3a64c Mon Sep 17 00:00:00 2001 From: Yang Wei Date: Wed, 6 Feb 2019 00:25:54 +0800 Subject: net: broadcom: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles dev_consume_skb_irq() should be called in sbdma_tx_process() when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by: Yang Wei Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/sb1250-mac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/sb1250-mac.c b/drivers/net/ethernet/broadcom/sb1250-mac.c index 5db9f4158e62..134ae2862efa 100644 --- a/drivers/net/ethernet/broadcom/sb1250-mac.c +++ b/drivers/net/ethernet/broadcom/sb1250-mac.c @@ -1288,7 +1288,7 @@ static void sbdma_tx_process(struct sbmac_softc *sc, struct sbmacdma *d, * for transmits, we just free buffers. */ - dev_kfree_skb_irq(sb); + dev_consume_skb_irq(sb); /* * .. and advance to the next buffer. -- cgit v1.2.3 From e8c32c32b48c2e889704d8ca0872f92eb027838e Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Tue, 5 Feb 2019 14:47:21 -0600 Subject: net: Don't default Cavium PTP driver to 'y' 8c56df372bc1 ("net: add support for Cavium PTP coprocessor") added the Cavium PTP coprocessor driver and enabled it by default. Remove the "default y" because the driver only applies to Cavium ThunderX processors. Fixes: 8c56df372bc1 ("net: add support for Cavium PTP coprocessor") Signed-off-by: Bjorn Helgaas Signed-off-by: David S. Miller --- drivers/net/ethernet/cavium/Kconfig | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/cavium/Kconfig b/drivers/net/ethernet/cavium/Kconfig index 5f03199a3acf..05f4a3b21e29 100644 --- a/drivers/net/ethernet/cavium/Kconfig +++ b/drivers/net/ethernet/cavium/Kconfig @@ -54,7 +54,6 @@ config CAVIUM_PTP tristate "Cavium PTP coprocessor as PTP clock" depends on 64BIT && PCI imply PTP_1588_CLOCK - default y ---help--- This driver adds support for the Precision Time Protocol Clocks and Timestamping coprocessor (PTP) found on Cavium processors. -- cgit v1.2.3 From c0a47e44c0980b3b23ee31fa7936d70ea5dce491 Mon Sep 17 00:00:00 2001 From: Hangbin Liu Date: Thu, 7 Feb 2019 18:36:10 +0800 Subject: geneve: should not call rt6_lookup() when ipv6 was disabled When we add a new GENEVE device with IPv6 remote, checking only for IS_ENABLED(CONFIG_IPV6) is not enough as we may disable IPv6 in the kernel command line (ipv6.disable=1), and calling rt6_lookup() would cause a NULL pointer dereference. v2: - don't mix declarations and code (reported by Stefano Brivio, Eric Dumazet) - there's no need to use in6_dev_get() as we only need to check that idev exists (reported by David Ahern). This is under RTNL, so we can simply use __in6_dev_get() instead (Stefano, Eric). Reported-by: Jianlin Shi Fixes: c40e89fd358e9 ("geneve: configure MTU based on a lower device") Cc: Alexey Kodanev Signed-off-by: Hangbin Liu Reviewed-by: Stefano Brivio Signed-off-by: David S. Miller --- drivers/net/geneve.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/geneve.c b/drivers/net/geneve.c index 58bbba8582b0..3377ac66a347 100644 --- a/drivers/net/geneve.c +++ b/drivers/net/geneve.c @@ -1512,9 +1512,13 @@ static void geneve_link_config(struct net_device *dev, } #if IS_ENABLED(CONFIG_IPV6) case AF_INET6: { - struct rt6_info *rt = rt6_lookup(geneve->net, - &info->key.u.ipv6.dst, NULL, 0, - NULL, 0); + struct rt6_info *rt; + + if (!__in6_dev_get(dev)) + break; + + rt = rt6_lookup(geneve->net, &info->key.u.ipv6.dst, NULL, 0, + NULL, 0); if (rt && rt->dst.dev) ldev_mtu = rt->dst.dev->mtu - GENEVE_IPV6_HLEN; -- cgit v1.2.3 From 39841cc1cbb69344539c98a1fa9d858ed124c7ba Mon Sep 17 00:00:00 2001 From: Arun Parameswaran Date: Thu, 7 Feb 2019 16:01:18 -0800 Subject: net: dsa: b53: Fix for failure when irq is not defined in dt Fixes the issues with non BCM58XX chips in the b53 driver failing, when the irq is not specified in the device tree. Removed the check for BCM58XX in b53_srab_prepare_irq(), so the 'port->irq' will be set to '-EXIO' if the irq is not specified in the device tree. Fixes: 16994374a6fc ("net: dsa: b53: Make SRAB driver manage port interrupts") Fixes: b2ddc48a81b5 ("net: dsa: b53: Do not fail when IRQ are not initialized") Signed-off-by: Arun Parameswaran Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/dsa/b53/b53_srab.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/dsa/b53/b53_srab.c b/drivers/net/dsa/b53/b53_srab.c index 90f514252987..d9c56a779c08 100644 --- a/drivers/net/dsa/b53/b53_srab.c +++ b/drivers/net/dsa/b53/b53_srab.c @@ -511,9 +511,6 @@ static void b53_srab_prepare_irq(struct platform_device *pdev) /* Clear all pending interrupts */ writel(0xffffffff, priv->regs + B53_SRAB_INTR); - if (dev->pdata && dev->pdata->chip_id != BCM58XX_DEVICE_ID) - return; - for (i = 0; i < B53_N_PORTS; i++) { port = &priv->port_intrs[i]; -- cgit v1.2.3