From a228890f94586c2f8417831c228ac8ed955ef856 Mon Sep 17 00:00:00 2001 From: Icenowy Zheng Date: Tue, 29 Oct 2019 21:17:39 +0100 Subject: phy: allwinner: add phy driver for USB3 PHY on Allwinner H6 SoC Allwinner H6 SoC contains a USB3 PHY (with USB2 DP/DM lines also controlled). Add a driver for it. The register operations in this driver is mainly extracted from the BSP USB3 driver. Signed-off-by: Ondrej Jirman Signed-off-by: Icenowy Zheng Reviewed-by: Chen-Yu Tsai Acked-by: Maxime Ripard Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/allwinner/Kconfig | 11 ++ drivers/phy/allwinner/Makefile | 1 + drivers/phy/allwinner/phy-sun50i-usb3.c | 190 ++++++++++++++++++++++++++++++++ 3 files changed, 202 insertions(+) create mode 100644 drivers/phy/allwinner/phy-sun50i-usb3.c (limited to 'drivers/phy') diff --git a/drivers/phy/allwinner/Kconfig b/drivers/phy/allwinner/Kconfig index 215425296c77..3dab79e9d52b 100644 --- a/drivers/phy/allwinner/Kconfig +++ b/drivers/phy/allwinner/Kconfig @@ -45,3 +45,14 @@ config PHY_SUN9I_USB sun9i SoCs. This driver controls each individual USB 2 host PHY. + +config PHY_SUN50I_USB3 + tristate "Allwinner H6 SoC USB3 PHY driver" + depends on ARCH_SUNXI && HAS_IOMEM && OF + depends on RESET_CONTROLLER + select GENERIC_PHY + help + Enable this to support the USB3.0-capable transceiver that is + part of Allwinner H6 SoC. + + This driver controls each individual USB 2+3 host PHY combo. diff --git a/drivers/phy/allwinner/Makefile b/drivers/phy/allwinner/Makefile index 799a65c0b58d..bd74901a1255 100644 --- a/drivers/phy/allwinner/Makefile +++ b/drivers/phy/allwinner/Makefile @@ -2,3 +2,4 @@ obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o obj-$(CONFIG_PHY_SUN6I_MIPI_DPHY) += phy-sun6i-mipi-dphy.o obj-$(CONFIG_PHY_SUN9I_USB) += phy-sun9i-usb.o +obj-$(CONFIG_PHY_SUN50I_USB3) += phy-sun50i-usb3.o diff --git a/drivers/phy/allwinner/phy-sun50i-usb3.c b/drivers/phy/allwinner/phy-sun50i-usb3.c new file mode 100644 index 000000000000..1169f3e83a6f --- /dev/null +++ b/drivers/phy/allwinner/phy-sun50i-usb3.c @@ -0,0 +1,190 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Allwinner sun50i(H6) USB 3.0 phy driver + * + * Copyright (C) 2017 Icenowy Zheng + * + * Based on phy-sun9i-usb.c, which is: + * + * Copyright (C) 2014-2015 Chen-Yu Tsai + * + * Based on code from Allwinner BSP, which is: + * + * Copyright (c) 2010-2015 Allwinner Technology Co., Ltd. + */ + +#include +#include +#include +#include +#include +#include +#include + +/* Interface Status and Control Registers */ +#define SUNXI_ISCR 0x00 +#define SUNXI_PIPE_CLOCK_CONTROL 0x14 +#define SUNXI_PHY_TUNE_LOW 0x18 +#define SUNXI_PHY_TUNE_HIGH 0x1c +#define SUNXI_PHY_EXTERNAL_CONTROL 0x20 + +/* USB2.0 Interface Status and Control Register */ +#define SUNXI_ISCR_FORCE_VBUS (3 << 12) + +/* PIPE Clock Control Register */ +#define SUNXI_PCC_PIPE_CLK_OPEN (1 << 6) + +/* PHY External Control Register */ +#define SUNXI_PEC_EXTERN_VBUS (3 << 1) +#define SUNXI_PEC_SSC_EN (1 << 24) +#define SUNXI_PEC_REF_SSP_EN (1 << 26) + +/* PHY Tune High Register */ +#define SUNXI_TX_DEEMPH_3P5DB(n) ((n) << 19) +#define SUNXI_TX_DEEMPH_3P5DB_MASK GENMASK(24, 19) +#define SUNXI_TX_DEEMPH_6DB(n) ((n) << 13) +#define SUNXI_TX_DEEMPH_6GB_MASK GENMASK(18, 13) +#define SUNXI_TX_SWING_FULL(n) ((n) << 6) +#define SUNXI_TX_SWING_FULL_MASK GENMASK(12, 6) +#define SUNXI_LOS_BIAS(n) ((n) << 3) +#define SUNXI_LOS_BIAS_MASK GENMASK(5, 3) +#define SUNXI_TXVBOOSTLVL(n) ((n) << 0) +#define SUNXI_TXVBOOSTLVL_MASK GENMASK(0, 2) + +struct sun50i_usb3_phy { + struct phy *phy; + void __iomem *regs; + struct reset_control *reset; + struct clk *clk; +}; + +static void sun50i_usb3_phy_open(struct sun50i_usb3_phy *phy) +{ + u32 val; + + val = readl(phy->regs + SUNXI_PHY_EXTERNAL_CONTROL); + val |= SUNXI_PEC_EXTERN_VBUS; + val |= SUNXI_PEC_SSC_EN | SUNXI_PEC_REF_SSP_EN; + writel(val, phy->regs + SUNXI_PHY_EXTERNAL_CONTROL); + + val = readl(phy->regs + SUNXI_PIPE_CLOCK_CONTROL); + val |= SUNXI_PCC_PIPE_CLK_OPEN; + writel(val, phy->regs + SUNXI_PIPE_CLOCK_CONTROL); + + val = readl(phy->regs + SUNXI_ISCR); + val |= SUNXI_ISCR_FORCE_VBUS; + writel(val, phy->regs + SUNXI_ISCR); + + /* + * All the magic numbers written to the PHY_TUNE_{LOW_HIGH} + * registers are directly taken from the BSP USB3 driver from + * Allwiner. + */ + writel(0x0047fc87, phy->regs + SUNXI_PHY_TUNE_LOW); + + val = readl(phy->regs + SUNXI_PHY_TUNE_HIGH); + val &= ~(SUNXI_TXVBOOSTLVL_MASK | SUNXI_LOS_BIAS_MASK | + SUNXI_TX_SWING_FULL_MASK | SUNXI_TX_DEEMPH_6GB_MASK | + SUNXI_TX_DEEMPH_3P5DB_MASK); + val |= SUNXI_TXVBOOSTLVL(0x7); + val |= SUNXI_LOS_BIAS(0x7); + val |= SUNXI_TX_SWING_FULL(0x55); + val |= SUNXI_TX_DEEMPH_6DB(0x20); + val |= SUNXI_TX_DEEMPH_3P5DB(0x15); + writel(val, phy->regs + SUNXI_PHY_TUNE_HIGH); +} + +static int sun50i_usb3_phy_init(struct phy *_phy) +{ + struct sun50i_usb3_phy *phy = phy_get_drvdata(_phy); + int ret; + + ret = clk_prepare_enable(phy->clk); + if (ret) + return ret; + + ret = reset_control_deassert(phy->reset); + if (ret) { + clk_disable_unprepare(phy->clk); + return ret; + } + + sun50i_usb3_phy_open(phy); + return 0; +} + +static int sun50i_usb3_phy_exit(struct phy *_phy) +{ + struct sun50i_usb3_phy *phy = phy_get_drvdata(_phy); + + reset_control_assert(phy->reset); + clk_disable_unprepare(phy->clk); + + return 0; +} + +static const struct phy_ops sun50i_usb3_phy_ops = { + .init = sun50i_usb3_phy_init, + .exit = sun50i_usb3_phy_exit, + .owner = THIS_MODULE, +}; + +static int sun50i_usb3_phy_probe(struct platform_device *pdev) +{ + struct sun50i_usb3_phy *phy; + struct device *dev = &pdev->dev; + struct phy_provider *phy_provider; + struct resource *res; + + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); + if (!phy) + return -ENOMEM; + + phy->clk = devm_clk_get(dev, NULL); + if (IS_ERR(phy->clk)) { + if (PTR_ERR(phy->clk) != -EPROBE_DEFER) + dev_err(dev, "failed to get phy clock\n"); + return PTR_ERR(phy->clk); + } + + phy->reset = devm_reset_control_get(dev, NULL); + if (IS_ERR(phy->reset)) { + dev_err(dev, "failed to get reset control\n"); + return PTR_ERR(phy->reset); + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + phy->regs = devm_ioremap_resource(dev, res); + if (IS_ERR(phy->regs)) + return PTR_ERR(phy->regs); + + phy->phy = devm_phy_create(dev, NULL, &sun50i_usb3_phy_ops); + if (IS_ERR(phy->phy)) { + dev_err(dev, "failed to create PHY\n"); + return PTR_ERR(phy->phy); + } + + phy_set_drvdata(phy->phy, phy); + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static const struct of_device_id sun50i_usb3_phy_of_match[] = { + { .compatible = "allwinner,sun50i-h6-usb3-phy" }, + { }, +}; +MODULE_DEVICE_TABLE(of, sun50i_usb3_phy_of_match); + +static struct platform_driver sun50i_usb3_phy_driver = { + .probe = sun50i_usb3_phy_probe, + .driver = { + .of_match_table = sun50i_usb3_phy_of_match, + .name = "sun50i-usb3-phy", + } +}; +module_platform_driver(sun50i_usb3_phy_driver); + +MODULE_DESCRIPTION("Allwinner H6 USB 3.0 phy driver"); +MODULE_AUTHOR("Icenowy Zheng "); +MODULE_LICENSE("GPL"); -- cgit v1.2.3