From f3b5a8d9b50d71b8c9fb72aa9c8ea948ad1a4ef9 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Mon, 30 Nov 2015 10:44:30 +0900 Subject: phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver This patch adds support for R-Car generation 3 USB2 PHY driver. This SoC has 3 EHCI/OHCI channels, and the channel 0 is shared with the HSUSB (USB2.0 peripheral) device. And each channel has independent registers about the PHYs. So, the purpose of this driver is: 1) initializes some registers of SoC specific to use the {ehci,ohci}-platform driver. 2) detects id pin to select host or peripheral on the channel 0. For now, this driver only supports 1) above. Signed-off-by: Yoshihiro Shimoda Acked-by: Rob Herring Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/Kconfig | 7 ++ drivers/phy/Makefile | 1 + drivers/phy/phy-rcar-gen3-usb2.c | 217 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 225 insertions(+) create mode 100644 drivers/phy/phy-rcar-gen3-usb2.c (limited to 'drivers/phy') diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 03cb3ea2d2c0..f90b7660dd3e 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -118,6 +118,13 @@ config PHY_RCAR_GEN2 help Support for USB PHY found on Renesas R-Car generation 2 SoCs. +config PHY_RCAR_GEN3_USB2 + tristate "Renesas R-Car generation 3 USB 2.0 PHY driver" + depends on OF && ARCH_SHMOBILE + select GENERIC_PHY + help + Support for USB 2.0 PHY found on Renesas R-Car generation 3 SoCs. + config OMAP_CONTROL_PHY tristate "OMAP CONTROL PHY Driver" depends on ARCH_OMAP2PLUS || COMPILE_TEST diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index 075db1a81aa5..91d7a62c6794 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o obj-$(CONFIG_PHY_MIPHY28LP) += phy-miphy28lp.o obj-$(CONFIG_PHY_MIPHY365X) += phy-miphy365x.o obj-$(CONFIG_PHY_RCAR_GEN2) += phy-rcar-gen2.o +obj-$(CONFIG_PHY_RCAR_GEN3_USB2) += phy-rcar-gen3-usb2.o obj-$(CONFIG_OMAP_CONTROL_PHY) += phy-omap-control.o obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o obj-$(CONFIG_TI_PIPE3) += phy-ti-pipe3.o diff --git a/drivers/phy/phy-rcar-gen3-usb2.c b/drivers/phy/phy-rcar-gen3-usb2.c new file mode 100644 index 000000000000..269615228b1b --- /dev/null +++ b/drivers/phy/phy-rcar-gen3-usb2.c @@ -0,0 +1,217 @@ +/* + * Renesas R-Car Gen3 for USB2.0 PHY driver + * + * Copyright (C) 2015 Renesas Electronics Corporation + * + * This is based on the phy-rcar-gen2 driver: + * Copyright (C) 2014 Renesas Solutions Corp. + * Copyright (C) 2014 Cogent Embedded, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include + +/******* USB2.0 Host registers (original offset is +0x200) *******/ +#define USB2_INT_ENABLE 0x000 +#define USB2_USBCTR 0x00c +#define USB2_SPD_RSM_TIMSET 0x10c +#define USB2_OC_TIMSET 0x110 + +/* INT_ENABLE */ +#define USB2_INT_ENABLE_USBH_INTB_EN BIT(2) +#define USB2_INT_ENABLE_USBH_INTA_EN BIT(1) +#define USB2_INT_ENABLE_INIT (USB2_INT_ENABLE_USBH_INTB_EN | \ + USB2_INT_ENABLE_USBH_INTA_EN) + +/* USBCTR */ +#define USB2_USBCTR_DIRPD BIT(2) +#define USB2_USBCTR_PLL_RST BIT(1) + +/* SPD_RSM_TIMSET */ +#define USB2_SPD_RSM_TIMSET_INIT 0x014e029b + +/* OC_TIMSET */ +#define USB2_OC_TIMSET_INIT 0x000209ab + +/******* HSUSB registers (original offset is +0x100) *******/ +#define HSUSB_LPSTS 0x02 +#define HSUSB_UGCTRL2 0x84 + +/* Low Power Status register (LPSTS) */ +#define HSUSB_LPSTS_SUSPM 0x4000 + +/* USB General control register 2 (UGCTRL2) */ +#define HSUSB_UGCTRL2_MASK 0x00000031 /* bit[31:6] should be 0 */ +#define HSUSB_UGCTRL2_USB0SEL 0x00000030 +#define HSUSB_UGCTRL2_USB0SEL_HOST 0x00000010 +#define HSUSB_UGCTRL2_USB0SEL_HS_USB 0x00000020 +#define HSUSB_UGCTRL2_USB0SEL_OTG 0x00000030 + +struct rcar_gen3_data { + void __iomem *base; + struct clk *clk; +}; + +struct rcar_gen3_chan { + struct rcar_gen3_data usb2; + struct rcar_gen3_data hsusb; + struct phy *phy; +}; + +static int rcar_gen3_phy_usb2_init(struct phy *p) +{ + struct rcar_gen3_chan *channel = phy_get_drvdata(p); + void __iomem *usb2_base = channel->usb2.base; + void __iomem *hsusb_base = channel->hsusb.base; + u32 val; + + /* Initialize USB2 part */ + writel(USB2_INT_ENABLE_INIT, usb2_base + USB2_INT_ENABLE); + writel(USB2_SPD_RSM_TIMSET_INIT, usb2_base + USB2_SPD_RSM_TIMSET); + writel(USB2_OC_TIMSET_INIT, usb2_base + USB2_OC_TIMSET); + + /* Initialize HSUSB part */ + if (hsusb_base) { + /* TODO: support "OTG" mode */ + val = readl(hsusb_base + HSUSB_UGCTRL2); + val = (val & ~HSUSB_UGCTRL2_USB0SEL) | + HSUSB_UGCTRL2_USB0SEL_HOST; + writel(val & HSUSB_UGCTRL2_MASK, hsusb_base + HSUSB_UGCTRL2); + } + + return 0; +} + +static int rcar_gen3_phy_usb2_exit(struct phy *p) +{ + struct rcar_gen3_chan *channel = phy_get_drvdata(p); + + writel(0, channel->usb2.base + USB2_INT_ENABLE); + + return 0; +} + +static int rcar_gen3_phy_usb2_power_on(struct phy *p) +{ + struct rcar_gen3_chan *channel = phy_get_drvdata(p); + void __iomem *usb2_base = channel->usb2.base; + void __iomem *hsusb_base = channel->hsusb.base; + u32 val; + + val = readl(usb2_base + USB2_USBCTR); + val |= USB2_USBCTR_PLL_RST; + writel(val, usb2_base + USB2_USBCTR); + val &= ~USB2_USBCTR_PLL_RST; + writel(val, usb2_base + USB2_USBCTR); + + /* + * TODO: To reduce power consuming, this driver should set the SUSPM + * after the PHY detects ID pin as peripheral. + */ + if (hsusb_base) { + /* Power on HSUSB PHY */ + val = readw(hsusb_base + HSUSB_LPSTS); + val |= HSUSB_LPSTS_SUSPM; + writew(val, hsusb_base + HSUSB_LPSTS); + } + + return 0; +} + +static int rcar_gen3_phy_usb2_power_off(struct phy *p) +{ + struct rcar_gen3_chan *channel = phy_get_drvdata(p); + void __iomem *hsusb_base = channel->hsusb.base; + u32 val; + + if (hsusb_base) { + /* Power off HSUSB PHY */ + val = readw(hsusb_base + HSUSB_LPSTS); + val &= ~HSUSB_LPSTS_SUSPM; + writew(val, hsusb_base + HSUSB_LPSTS); + } + + return 0; +} + +static struct phy_ops rcar_gen3_phy_usb2_ops = { + .init = rcar_gen3_phy_usb2_init, + .exit = rcar_gen3_phy_usb2_exit, + .power_on = rcar_gen3_phy_usb2_power_on, + .power_off = rcar_gen3_phy_usb2_power_off, + .owner = THIS_MODULE, +}; + +static const struct of_device_id rcar_gen3_phy_usb2_match_table[] = { + { .compatible = "renesas,usb2-phy-r8a7795" }, + { } +}; +MODULE_DEVICE_TABLE(of, rcar_gen3_phy_usb2_match_table); + +static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct rcar_gen3_chan *channel; + struct phy_provider *provider; + struct resource *res; + + if (!dev->of_node) { + dev_err(dev, "This driver needs device tree\n"); + return -EINVAL; + } + + channel = devm_kzalloc(dev, sizeof(*channel), GFP_KERNEL); + if (!channel) + return -ENOMEM; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "usb2_host"); + channel->usb2.base = devm_ioremap_resource(dev, res); + if (IS_ERR(channel->usb2.base)) + return PTR_ERR(channel->usb2.base); + + /* "hsusb" memory resource is optional */ + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "hsusb"); + + /* To avoid error message by devm_ioremap_resource() */ + if (res) { + channel->hsusb.base = devm_ioremap_resource(dev, res); + if (IS_ERR(channel->hsusb.base)) + channel->hsusb.base = NULL; + } + + /* devm_phy_create() will call pm_runtime_enable(dev); */ + channel->phy = devm_phy_create(dev, NULL, &rcar_gen3_phy_usb2_ops); + if (IS_ERR(channel->phy)) { + dev_err(dev, "Failed to create USB2 PHY\n"); + return PTR_ERR(channel->phy); + } + + phy_set_drvdata(channel->phy, channel); + + provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (IS_ERR(provider)) + dev_err(dev, "Failed to register PHY provider\n"); + + return PTR_ERR_OR_ZERO(provider); +} + +static struct platform_driver rcar_gen3_phy_usb2_driver = { + .driver = { + .name = "phy_rcar_gen3_usb2", + .of_match_table = rcar_gen3_phy_usb2_match_table, + }, + .probe = rcar_gen3_phy_usb2_probe, +}; +module_platform_driver(rcar_gen3_phy_usb2_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Renesas R-Car Gen3 USB 2.0 PHY"); +MODULE_AUTHOR("Yoshihiro Shimoda "); -- cgit v1.2.3