From e9945b2633deccda74a769d94060df49c53ff181 Mon Sep 17 00:00:00 2001 From: Horatiu Vultur Date: Tue, 18 Oct 2022 09:09:59 +0200 Subject: pinctrl: ocelot: Fix incorrect trigger of the interrupt. The interrupt controller can detect only link changes. So in case an external device generated a level based interrupt, then the interrupt controller detected correctly the first edge. But the problem was that the interrupt controller was detecting also the edge when the interrupt was cleared. So it would generate another interrupt. The fix for this is to clear the second interrupt but still check the interrupt line status. Fixes: c297561bc98a ("pinctrl: ocelot: Fix interrupt controller") Signed-off-by: Horatiu Vultur Tested-by: Michael Walle Link: https://lore.kernel.org/r/20221018070959.1322606-1-horatiu.vultur@microchip.com Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-ocelot.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) (limited to 'drivers/pinctrl/pinctrl-ocelot.c') diff --git a/drivers/pinctrl/pinctrl-ocelot.c b/drivers/pinctrl/pinctrl-ocelot.c index 62ce3957abe4..687aaa601555 100644 --- a/drivers/pinctrl/pinctrl-ocelot.c +++ b/drivers/pinctrl/pinctrl-ocelot.c @@ -1864,19 +1864,28 @@ static void ocelot_irq_unmask_level(struct irq_data *data) if (val & bit) ack = true; + /* Try to clear any rising edges */ + if (!active && ack) + regmap_write_bits(info->map, REG(OCELOT_GPIO_INTR, info, gpio), + bit, bit); + /* Enable the interrupt now */ gpiochip_enable_irq(chip, gpio); regmap_update_bits(info->map, REG(OCELOT_GPIO_INTR_ENA, info, gpio), bit, bit); /* - * In case the interrupt line is still active and the interrupt - * controller has not seen any changes in the interrupt line, then it - * means that there happen another interrupt while the line was active. + * In case the interrupt line is still active then it means that + * there happen another interrupt while the line was active. * So we missed that one, so we need to kick the interrupt again * handler. */ - if (active && !ack) { + regmap_read(info->map, REG(OCELOT_GPIO_IN, info, gpio), &val); + if ((!(val & bit) && trigger_level == IRQ_TYPE_LEVEL_LOW) || + (val & bit && trigger_level == IRQ_TYPE_LEVEL_HIGH)) + active = true; + + if (active) { struct ocelot_irq_work *work; work = kmalloc(sizeof(*work), GFP_ATOMIC); -- cgit v1.2.3